2008-Dec-21 03:34:40 BEGIN executive: CIMA executive starting ... 2008-Dec-21 03:34:40 NOTE executive: STARTING NEW CIMA SESSION 2008-Dec-21 03:34:40 INFO1 executive: Using CIMA version 3.0.09 'normal' from 2008-12-15 23:23 2008-Dec-21 03:34:41 INFO4 executive: This is an ON-LINE session 2008-Dec-21 03:34:41 INFO4 executive: This is a REMOTE session 2008-Dec-21 03:34:41 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2008-Dec-21 03:34:41 INFO1 executive: CIMA session for project 'a2048' in 'line' mode for 'SS' 2008-Dec-21 03:34:41 INFO2 executive: Logging to '/share/obs4/usr/a2048/a2048.cimalog_20081221' 2008-Dec-21 03:34:41 LOG2 log_preferences: Currently applied preferences: 2008-Dec-21 03:34:41 LOG2 log_preferences: prefs(dailylog) = daily 2008-Dec-21 03:34:41 LOG2 log_preferences: prefs(offlinelog) = skip 2008-Dec-21 03:34:41 LOG2 log_preferences: prefs(datawindow) = ignore 2008-Dec-21 03:34:41 LOG2 log_preferences: prefs(limitwarning) = enabled 2008-Dec-21 03:34:41 LOG2 log_preferences: prefs(wappfailure) = abort 2008-Dec-21 03:34:41 LOG2 log_preferences: prefs(helpstyle) = stay-open 2008-Dec-21 03:34:41 LOG2 log_preferences: prefs(logcolours) = full 2008-Dec-21 03:34:41 LOG2 log_preferences: prefs(displaylevel) = INFO3 2008-Dec-21 03:34:41 LOG2 log_preferences: prefs(loglevel) = LOG5 2008-Dec-21 03:34:41 LOG2 log_preferences: prefs(displayformat) = short 2008-Dec-21 03:34:41 LOG2 log_preferences: prefs(logformat) = new 2008-Dec-21 03:34:41 LOG2 log_preferences: prefs(fontsize) = 4 2008-Dec-21 03:34:41 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2008-Dec-21 03:34:41 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2048 2008-Dec-21 03:34:41 ALERT executive: CIMA executive ready 2008-Dec-21 03:34:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 03:34:44 LOG4 got_cormsg: From DATATAKING: setup 2008-Dec-21 03:34:45 NOTE frontend: CIMA frontend ready 2008-Dec-21 03:34:50 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0x300002 2008-Dec-21 03:34:50 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0x300002' 2008-Dec-21 03:34:50 LOG4 got_cormsg: From DATATAKING: vw% io 2008-Dec-21 03:34:50 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2008-Dec-21 03:34:50 LOG4 got_cormsg: From DATATAKING: 2008-Dec-21 03:34:50 LOG4 got_cormsg: From DATATAKING: vw% tape stat 2008-Dec-21 03:34:50 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2008-Dec-21 03:34:50 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2008-Dec-21 03:34:50 LOG4 got_cormsg: From DATATAKING: vw% connectall 2008-Dec-21 03:34:50 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2008-Dec-21 03:34:50 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2008-Dec-21 03:34:50 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2008-Dec-21 03:34:50 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2008-Dec-21 03:34:50 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2008-Dec-21 03:34:51 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2008-Dec-21 03:34:51 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2008-Dec-21 03:34:51 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2008-Dec-21 03:34:51 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2048 2008-Dec-21 03:34:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 03:34:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 03:34:58 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2008-Dec-21 03:34:58 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2008-Dec-21 03:34:58 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2008-Dec-21 03:34:58 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2008-Dec-21 03:34:58 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Dec-21 03:34:58 NOTE select_receiver: Starting to select receiver ALFA 2008-Dec-21 03:34:58 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Dec-21 03:34:58 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Dec-21 03:34:58 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Dec-21 03:34:58 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Dec-21 03:34:58 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Dec-21 03:34:58 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Dec-21 03:34:58 DONE finish_task: DONE finished selecting: receiver ALFA 2008-Dec-21 03:34:58 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Dec-21 03:34:58 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Dec-21 03:34:58 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Dec-21 03:34:58 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Dec-21 03:34:58 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Dec-21 03:35:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 03:35:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 03:36:16 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2008-Dec-21 03:36:16 LOG4 exec_msg: From OBSERVER: restart_wapp 2008-Dec-21 03:36:16 LOG5 restart_wapp: Calling 'restart_wapp' 2008-Dec-21 03:36:16 BEGIN begin_task: Starting task 'restarting the WAPPs' 2008-Dec-21 03:36:16 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Dec-21 03:36:16 NOTE restart_wapp: Restarting all WAPPs 2008-Dec-21 03:36:16 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2008-Dec-21 03:36:16 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2008-Dec-21 03:36:16 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Dec-21 03:36:17 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Dec-21 03:36:19 ALERT WAPP=3-wappcon: WAPP3 restarting 2008-Dec-21 03:36:20 ALERT WAPP=2-wappcon: WAPP2 restarting 2008-Dec-21 03:36:20 ALERT WAPP=1-wappcon: WAPP1 restarting 2008-Dec-21 03:36:20 ALERT WAPP=4-wappcon: WAPP4 restarting 2008-Dec-21 03:37:09 INFO1 CIMA-run_command_file: Transferring command file '081221_obs.cmd ' to executive ... 2008-Dec-21 03:37:09 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 3 {LOAD ages_config.conf} 2008-Dec-21 03:37:09 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 4 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5} 2008-Dec-21 03:37:09 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 5 {CATALOG AGESFull.cat} 2008-Dec-21 03:37:09 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {IF LSTSLEW(AGES3193_p2_157) < 091931 THEN} 2008-Dec-21 03:37:09 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {FIXEDDRIFT az=257.46 alfaangle=-59.5 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_157 ra=95300.00 dec=195900.00} 2008-Dec-21 03:37:09 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 12 {ENDIF} 2008-Dec-21 03:37:09 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 15 {IF LSTSLEW(AGES3193_p2_159) < 094231 THEN} 2008-Dec-21 03:37:09 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 16 {FIXEDDRIFT az=238.98 alfaangle=-36.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_159 ra=95300.00 dec=195600.00} 2008-Dec-21 03:37:09 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 19 {ENDIF} 2008-Dec-21 03:37:09 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 22 {IF LSTSLEW(AGES3193_p2_161) < 100831 THEN} 2008-Dec-21 03:37:09 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 23 {FIXEDDRIFT az=113.34 alfaangle=83.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_161 ra=95300.00 dec=195300.00} 2008-Dec-21 03:37:09 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 26 {ENDIF} 2008-Dec-21 03:37:09 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 29 {IF LSTSLEW(AGES3193_p2_002) < 103131 THEN} 2008-Dec-21 03:37:09 LOG4 exec_msg: From OBSERVER: store_command_file_line 14 30 {FIXEDDRIFT az=123.28 alfaangle=75.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_002 ra=95300.00 dec=235130.00} 2008-Dec-21 03:37:09 LOG4 exec_msg: From OBSERVER: store_command_file_line 15 33 {ENDIF} 2008-Dec-21 03:37:09 LOG4 exec_msg: From OBSERVER: store_command_file_line 16 36 {IF LSTSLEW(AGES3193_p2_004) < 105431 THEN} 2008-Dec-21 03:37:09 LOG4 exec_msg: From OBSERVER: store_command_file_line 17 37 {FIXEDDRIFT az=113.45 alfaangle=88.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_004 ra=95300.00 dec=234830.00} 2008-Dec-21 03:37:09 LOG4 exec_msg: From OBSERVER: store_command_file_line 18 40 {ENDIF} 2008-Dec-21 03:37:09 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-Dec-21 03:37:09 LOG4 exec_msg: From OBSERVER: run_command_file 081221_obs.cmd 1 1 18 2008-Dec-21 03:37:09 LOG4 run_command_file: Calling 'run_command_file 081221_obs.cmd 1 1 18' 2008-Dec-21 03:37:09 BEGIN begin_task: Starting task 'running command file '081221_obs.cmd'' 2008-Dec-21 03:37:09 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Dec-21 03:37:09 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '081221_obs.cmd' ...} 2008-Dec-21 03:37:09 NOTE run_command_file: Starting execution of command file '081221_obs.cmd' from line 1 2008-Dec-21 03:37:09 COMMAND run_command_line: EXECUTING command 3: 'LOAD ages_config.conf' 2008-Dec-21 03:37:09 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2008-Dec-21 03:37:09 NOTE CIMA-check_config_file: File 'ages_config.conf' contains an ALFA set-up which will be ignored! 2008-Dec-21 03:37:09 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Dec-21 03:37:09 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2008-Dec-21 03:37:09 NOTE CIMA-load_config_file: Loading configuration file 'ages_config.conf' 2008-Dec-21 03:37:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Dec-21 03:37:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Dec-21 03:37:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Dec-21 03:37:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Dec-21 03:37:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Dec-21 03:37:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2008-Dec-21 03:37:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Dec-21 03:37:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786" 2008-Dec-21 03:37:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786" 2008-Dec-21 03:37:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786" 2008-Dec-21 03:37:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786" 2008-Dec-21 03:37:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786" 2008-Dec-21 03:37:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786" 2008-Dec-21 03:37:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786" 2008-Dec-21 03:37:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786" 2008-Dec-21 03:37:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786" 2008-Dec-21 03:37:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Dec-21 03:37:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Dec-21 03:37:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Dec-21 03:37:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Dec-21 03:37:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Dec-21 03:37:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Dec-21 03:37:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Dec-21 03:37:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Dec-21 03:37:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Dec-21 03:37:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Dec-21 03:37:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Dec-21 03:37:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Dec-21 03:37:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Dec-21 03:37:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2008-Dec-21 03:37:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Dec-21 03:37:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Dec-21 03:37:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Dec-21 03:37:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Dec-21 03:37:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Dec-21 03:37:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Dec-21 03:37:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Dec-21 03:37:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Dec-21 03:37:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Dec-21 03:37:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1670.405752" 2008-Dec-21 03:37:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Dec-21 03:37:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Dec-21 03:37:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Dec-21 03:37:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Dec-21 03:37:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Dec-21 03:37:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Dec-21 03:37:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Dec-21 03:37:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Dec-21 03:37:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Dec-21 03:37:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Dec-21 03:37:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Dec-21 03:37:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Dec-21 03:37:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Dec-21 03:37:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Dec-21 03:37:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Dec-21 03:37:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Dec-21 03:37:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Dec-21 03:37:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Dec-21 03:37:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Dec-21 03:37:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Dec-21 03:37:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Dec-21 03:37:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Dec-21 03:37:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Dec-21 03:37:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Dec-21 03:37:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Dec-21 03:37:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Dec-21 03:37:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Dec-21 03:37:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Dec-21 03:37:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Dec-21 03:37:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Dec-21 03:37:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Dec-21 03:37:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Dec-21 03:37:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Dec-21 03:37:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Dec-21 03:37:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Dec-21 03:37:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Dec-21 03:37:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Dec-21 03:37:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Dec-21 03:37:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Dec-21 03:37:11 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Dec-21 03:37:11 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Dec-21 03:37:11 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Dec-21 03:37:11 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Dec-21 03:37:11 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Dec-21 03:37:11 INFO1 config_iflo: Selecting receiver ALFA 2008-Dec-21 03:37:11 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2008-Dec-21 03:37:11 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2008-Dec-21 03:37:11 START begin_task: Starting task 'selecting receiver ALFA' 2008-Dec-21 03:37:11 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Dec-21 03:37:11 NOTE select_receiver: Starting to select receiver ALFA 2008-Dec-21 03:37:12 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Dec-21 03:37:12 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Dec-21 03:37:12 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Dec-21 03:37:12 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Dec-21 03:37:12 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Dec-21 03:37:12 LOG5 finish_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Dec-21 03:37:12 INFO2 finish_task: DONE finished selecting: receiver ALFA 2008-Dec-21 03:37:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-21 03:37:12 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Dec-21 03:37:12 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Dec-21 03:37:12 START begin_task: Starting task 'waiting for receiver ALFA' 2008-Dec-21 03:37:12 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2008-Dec-21 03:37:12 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2008-Dec-21 03:37:12 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2008-Dec-21 03:37:12 INFO1 config_iflo: Configuring rest of the IF/LO path 2008-Dec-21 03:37:12 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2008-Dec-21 03:37:12 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Dec-21 03:37:12 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Dec-21 03:37:12 START begin_task: Starting task 'waiting on command to ALFA' 2008-Dec-21 03:37:12 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2008-Dec-21 03:37:12 LOG4 got_alfamon: From ALFAMON: ACK 2008-Dec-21 03:37:12 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Dec-21 03:37:12 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2008-Dec-21 03:37:12 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Dec-21 03:37:12 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Dec-21 03:37:12 LOG3 vw_send: To DATATAKING: alfafb 1 2008-Dec-21 03:37:12 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2008-Dec-21 03:37:12 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Dec-21 03:37:12 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Dec-21 03:37:12 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2008-Dec-21 03:37:12 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2008-Dec-21 03:37:12 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2008-Dec-21 03:37:12 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1670405752.0} 2008-Dec-21 03:37:12 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2008-Dec-21 03:37:12 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2008-Dec-21 03:37:12 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Dec-21 03:37:12 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Dec-21 03:37:12 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Dec-21 03:37:12 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Dec-21 03:37:12 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Dec-21 03:37:12 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2008-Dec-21 03:37:12 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2008-Dec-21 03:37:12 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2008-Dec-21 03:37:12 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2008-Dec-21 03:37:12 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Dec-21 03:37:12 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2008-Dec-21 03:37:12 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Dec-21 03:37:12 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Dec-21 03:37:12 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-21 03:37:12 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Dec-21 03:37:12 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2008-Dec-21 03:37:12 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Dec-21 03:37:12 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2008-Dec-21 03:37:12 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2008-Dec-21 03:37:12 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Dec-21 03:37:12 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Dec-21 03:37:12 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Dec-21 03:37:12 LOG5 begin_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2008-Dec-21 03:37:12 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Dec-21 03:37:12 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Dec-21 03:37:12 LOG4 got_cormsg: From DATATAKING: alfafb 1 2008-Dec-21 03:37:12 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2008-Dec-21 03:37:12 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2008-Dec-21 03:37:12 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2008-Dec-21 03:37:12 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2008-Dec-21 03:37:12 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1670405752.0} 2008-Dec-21 03:37:12 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2008-Dec-21 03:37:12 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2008-Dec-21 03:37:12 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2008-Dec-21 03:37:12 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2008-Dec-21 03:37:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2008-Dec-21 03:37:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2008-Dec-21 03:37:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Dec-21 03:37:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2008-Dec-21 03:37:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Dec-21 03:37:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-21 03:37:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Dec-21 03:37:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2008-Dec-21 03:37:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2008-Dec-21 03:37:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2008-Dec-21 03:37:12 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Dec-21 03:37:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 03:37:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 03:37:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 03:37:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 03:37:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 03:37:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 03:37:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 03:37:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 03:37:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 03:37:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 03:37:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 03:37:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 03:37:27 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 03:37:27 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 03:37:27 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 03:37:27 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 03:37:27 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 03:37:27 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 03:37:28 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 03:37:28 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 03:37:28 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 03:37:28 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 03:37:28 LOG4 got_cormsg: From DATATAKING: DONE 2008-Dec-21 03:37:28 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Dec-21 03:37:28 LOG5 end_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2008-Dec-21 03:37:28 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Dec-21 03:37:28 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Dec-21 03:37:28 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Dec-21 03:37:28 DONE finish_task: DONE finished configuration: IF/LO path 2008-Dec-21 03:37:28 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Dec-21 03:37:28 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Dec-21 03:37:28 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Dec-21 03:37:28 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Dec-21 03:37:28 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Dec-21 03:37:28 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Dec-21 03:37:28 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Dec-21 03:37:28 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2008-Dec-21 03:37:28 START begin_task: Starting task 'selecting calibration port' 2008-Dec-21 03:37:28 LOG5 begin_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-Dec-21 03:37:28 LOG3 vw_send: To DATATAKING: calport 3 2008-Dec-21 03:37:28 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Dec-21 03:37:28 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Dec-21 03:37:28 START begin_task: Starting task 'waiting on calport' 2008-Dec-21 03:37:28 LOG5 begin_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2008-Dec-21 03:37:28 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 03:37:28 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Dec-21 03:37:28 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Dec-21 03:37:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 03:37:29 LOG4 got_cormsg: From DATATAKING: DONE 2008-Dec-21 03:37:29 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Dec-21 03:37:29 LOG5 end_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2008-Dec-21 03:37:29 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Dec-21 03:37:29 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Dec-21 03:37:29 LOG5 end_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-Dec-21 03:37:29 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Dec-21 03:37:29 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Dec-21 03:37:29 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Dec-21 03:37:29 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2008-Dec-21 03:37:29 LOG3 CALCONTROL-caltrig: Software trigger 2008-Dec-21 03:37:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 03:37:29 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Dec-21 03:37:29 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Dec-21 03:37:29 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Dec-21 03:37:29 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2008-Dec-21 03:37:29 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Dec-21 03:37:29 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Dec-21 03:37:29 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Dec-21 03:37:29 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Dec-21 03:37:29 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Dec-21 03:37:29 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Dec-21 03:37:29 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Dec-21 03:37:29 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Dec-21 03:37:29 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 SS 2008-Dec-21 03:37:29 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 SS 2008-Dec-21 03:37:29 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 SS 2008-Dec-21 03:37:29 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 SS 2008-Dec-21 03:37:29 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Dec-21 03:37:29 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Dec-21 03:37:29 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Dec-21 03:37:29 LOG5 begin_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2008-Dec-21 03:37:29 LOG3 CALCONTROL-caltrig: Software trigger 2008-Dec-21 03:37:29 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Dec-21 03:37:29 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Dec-21 03:37:29 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Dec-21 03:37:29 LOG5 end_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2008-Dec-21 03:37:29 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 SS 2008-Dec-21 03:37:29 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 SS 2008-Dec-21 03:37:29 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 SS 2008-Dec-21 03:37:29 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 SS 2008-Dec-21 03:37:29 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Dec-21 03:37:29 LOG5 finish_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Dec-21 03:37:29 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Dec-21 03:37:29 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Dec-21 03:37:30 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Dec-21 03:37:30 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Dec-21 03:37:30 COMMAND run_command_line: EXECUTING command 4: 'SETUP FIXEDDRIFT calwhen=tracking calsecs=5' 2008-Dec-21 03:37:30 COMMAND run_command_line: EXECUTING command 5: 'CATALOG AGESFull.cat' 2008-Dec-21 03:37:30 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2008-Dec-21 03:37:30 COMMAND run_command_line: EXECUTING command 8: 'IF LSTSLEW(AGES3193_p2_157) < 091931 THEN' 2008-Dec-21 03:37:30 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p2_157) < 091931 2008-Dec-21 03:37:30 INFO5 is_if_valid: Condition parsed as: 9.2458629999999999 < 9.325277777777778 2008-Dec-21 03:37:30 COMMAND run_command_line: EXECUTING command 9: 'FIXEDDRIFT az=257.46 alfaangle=-59.5 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_157 ra=95300.00 dec=195900.00' 2008-Dec-21 03:37:30 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Dec-21 03:37:30 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 SS' 2008-Dec-21 03:37:30 NOTE WAPPDATA-new_file: New FITS file: wapp.20081221.a2048.0000.fits 2008-Dec-21 03:37:30 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Dec-21 03:37:30 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Dec-21 03:37:30 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20081221.a2048.0000.fits} 2008-Dec-21 03:37:30 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 SS' 2008-Dec-21 03:37:31 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Dec-21 03:37:31 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 257.46 -59.5 hcorcal 5 tracking no first 1 AGES3193_p2_157 95300.00 195900.00 J 8500.0 Heliocentric velocity(optical)' 2008-Dec-21 03:37:31 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Dec-21 03:37:31 LOG5 begin_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2008-Dec-21 03:37:31 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AUDSGAL2577' 2008-Dec-21 03:37:31 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Dec-21 03:37:31 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p2_157} 2008-Dec-21 03:37:31 INFO3 fixed_driftmap: Sending telescope to Az = 257.46 and ZA = 8.18 2008-Dec-21 03:37:31 LOG3 track_source: Calling 'track_source AGES3193_p2_157 257.46 8.1848924969 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Dec-21 03:37:31 START begin_task: Starting task 'sending tracking commands' 2008-Dec-21 03:37:31 LOG5 begin_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2008-Dec-21 03:37:31 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_157} INFO {Slewing to source 'AGES3193_p2_157' ...} 2008-Dec-21 03:37:31 INFO1 track_source: Starting to track AGES3193_p2_157 2008-Dec-21 03:37:31 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_157" 2008-Dec-21 03:37:31 LOG3 vw_send: To DATATAKING: set ra 257.46 2008-Dec-21 03:37:32 LOG3 vw_send: To DATATAKING: set dec 8.1848924969 2008-Dec-21 03:37:32 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Dec-21 03:37:32 LOG3 vw_send: To DATATAKING: pnt tr 257.46 8.1848924969 -CF 2008-Dec-21 03:37:32 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Dec-21 03:37:32 STOP finish_task: Finishing task 'sending tracking commands' 2008-Dec-21 03:37:32 LOG5 finish_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2008-Dec-21 03:37:32 INFO2 finish_task: DONE finished sending: tracking commands 2008-Dec-21 03:37:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-21 03:37:32 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Dec-21 03:37:32 LOG5 end_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2008-Dec-21 03:37:32 START begin_task: Starting task 'rotate ALFA to -59.5 degrees' 2008-Dec-21 03:37:32 LOG5 begin_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2008-Dec-21 03:37:32 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -59.5 degrees ...} 2008-Dec-21 03:37:32 INFO2 rotate_alfa: ALFA commanded to -59.5 degrees 2008-Dec-21 03:37:32 LOG3 sock_errsend: To ALFAMOTOR: POSITION -59.5 REPLY 2008-Dec-21 03:37:32 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Dec-21 03:37:32 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Dec-21 03:37:32 LOG5 begin_task: Level: (4) ID = <10017> Status = 0 0 0 0 ok 2008-Dec-21 03:37:32 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_157" 2008-Dec-21 03:37:32 LOG4 got_cormsg: From DATATAKING: set ra 257.46 2008-Dec-21 03:37:32 LOG4 got_cormsg: From DATATAKING: set dec 8.1848924969 2008-Dec-21 03:37:32 LOG4 got_cormsg: From DATATAKING: vw% 257.46 2008-Dec-21 03:37:32 LOG4 got_cormsg: From DATATAKING: vw% 8.1848924969 2008-Dec-21 03:37:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 03:37:32 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Dec-21 03:37:32 LOG4 got_cormsg: From DATATAKING: pnt tr 257.46 8.1848924969 -CF 2008-Dec-21 03:37:32 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Dec-21 03:37:32 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Dec-21 03:37:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 03:38:52 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Dec-21 03:38:52 INFO3 alfa_motor: ALFA rotator in-position -59.50 degrees 2008-Dec-21 03:38:52 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Dec-21 03:38:52 LOG5 end_task: Level: (4) ID = <10017> Status = 0 0 0 0 ok 2008-Dec-21 03:38:52 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Dec-21 03:38:52 STOP finish_task: Finishing task 'rotate ALFA to -59.5 degrees' 2008-Dec-21 03:38:52 LOG5 finish_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2008-Dec-21 03:38:52 INFO2 finish_task: DONE finished configuration: rotating ALFA to -59.5 degrees 2008-Dec-21 03:38:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-21 03:38:52 STOP end_task: Finishing task 'rotate ALFA to -59.5 degrees' with status 'OK' 2008-Dec-21 03:38:52 LOG5 end_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2008-Dec-21 03:38:53 START begin_task: Starting task 'waiting on telescope' 2008-Dec-21 03:38:53 LOG5 begin_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2008-Dec-21 03:38:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Dec-21 03:38:53 LOG3 waittrk: Start waittrk 5 2008-Dec-21 03:38:53 START begin_task: Starting task 'waiting on telescope movement' 2008-Dec-21 03:38:53 LOG5 begin_task: Level: (4) ID = <10019> Status = 0 0 0 0 ok 2008-Dec-21 03:38:58 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Dec-21 03:38:58 LOG5 end_task: Level: (4) ID = <10019> Status = 0 0 0 0 ok 2008-Dec-21 03:38:58 START begin_task: Starting task 'waiting on telescope on source' 2008-Dec-21 03:38:58 LOG5 begin_task: Level: (4) ID = <10020> Status = 0 0 0 0 ok 2008-Dec-21 03:40:53 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Dec-21 03:40:53 LOG5 end_task: Level: (4) ID = <10020> Status = 0 0 0 0 ok 2008-Dec-21 03:40:53 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Dec-21 03:40:53 INFO2 waittrk: Now tracking AGES3193_p2_157 2008-Dec-21 03:40:53 LOG4 waittrk: Current telescope position: Az = 256.93 ZA = 8.18 2008-Dec-21 03:40:53 STOP finish_task: Finishing task 'waiting on telescope' 2008-Dec-21 03:40:53 LOG5 finish_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2008-Dec-21 03:40:53 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Dec-21 03:40:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-21 03:40:53 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Dec-21 03:40:53 LOG5 end_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2008-Dec-21 03:40:53 START begin_task: Starting task 'selecting calibration type' 2008-Dec-21 03:40:53 LOG5 begin_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2008-Dec-21 03:40:53 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Dec-21 03:40:53 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Dec-21 03:40:53 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Dec-21 03:40:53 START begin_task: Starting task 'waiting on setcal' 2008-Dec-21 03:40:53 LOG5 begin_task: Level: (4) ID = <10022> Status = 0 0 0 0 ok 2008-Dec-21 03:40:53 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Dec-21 03:40:53 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Dec-21 03:40:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 03:40:53 LOG4 got_cormsg: From DATATAKING: DONE 2008-Dec-21 03:40:53 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Dec-21 03:40:53 LOG5 end_task: Level: (4) ID = <10022> Status = 0 0 0 0 ok 2008-Dec-21 03:40:53 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Dec-21 03:40:53 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Dec-21 03:40:53 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Dec-21 03:40:53 START begin_task: Starting task 'waiting on command to ALFA' 2008-Dec-21 03:40:53 LOG5 begin_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2008-Dec-21 03:40:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 03:40:53 LOG4 got_alfamon: From ALFAMON: ACK 2008-Dec-21 03:40:53 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Dec-21 03:40:53 LOG5 end_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2008-Dec-21 03:40:53 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Dec-21 03:40:53 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Dec-21 03:40:53 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Dec-21 03:40:53 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Dec-21 03:40:53 START begin_task: Starting task 'waiting on command to ALFA' 2008-Dec-21 03:40:53 LOG5 begin_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2008-Dec-21 03:40:53 LOG4 got_alfamon: From ALFAMON: ACK 2008-Dec-21 03:40:53 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Dec-21 03:40:53 LOG5 end_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2008-Dec-21 03:40:53 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Dec-21 03:40:53 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Dec-21 03:40:53 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Dec-21 03:40:53 LOG5 end_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2008-Dec-21 03:40:54 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2008-Dec-21 03:40:54 INFO2 astwait: Waiting for 218 seconds from 07:40:54 to 07:44:32 UTC ... 2008-Dec-21 03:40:54 LOG4 send_obs_status: To obs_status: <1> TASKTIME 218 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Dec-21 03:40:54 START begin_task: Starting task 'waiting on waiting for AST time' 2008-Dec-21 03:40:54 LOG5 begin_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2008-Dec-21 03:44:32 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2008-Dec-21 03:44:32 LOG5 end_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2008-Dec-21 03:44:32 INFO3 astwait: Finished waiting 2008-Dec-21 03:44:32 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Dec-21 03:44:32 LOG5 dopset_later: Calling 'dopset_later 60.871500171319838' 2008-Dec-21 03:44:32 INFO3 dopset_later: Setting Doppler correction for 03:45:32 (60.9 seconds from now) 2008-Dec-21 03:44:32 LOG5 antvel: Calling 'antvel 257.460000 8.184892 F 60.871500171319838' 2008-Dec-21 03:44:32 LOG2 antvel: Transforming current Az = 257.46 ZA = 8.18 to apparent RA = 09:53:31.5 Dec = +19:56:19.4 2008-Dec-21 03:44:32 LOG2 antvel: Parameters to Doppler: Heliocentric 27932 2008 356 0.0 2008-Dec-21 03:44:32 INFO5 antvel: Computed antenna velocity: -24.29433 km/s 2008-Dec-21 03:44:32 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-24.2943281933 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Dec-21 03:44:32 INFO4 dopset_gen: New sky frequencies: 1381.355370 1381.355370 1381.355370 1381.355370 1381.355370 1381.355370 1381.355370 1381.355370 1381.355370 2008-Dec-21 03:44:32 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.355370 sky0=1381.355370 sky1=1381.355370 sky2=1381.355370 sky3=1381.355370 sky4=1381.355370 sky5=1381.355370 sky6=1381.355370 sky7=1381.355370 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Dec-21 03:44:32 LOG2 dopset_gen: Result from 'sky2syn': 1631.355370 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Dec-21 03:44:32 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631355370.0} 2008-Dec-21 03:44:32 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-21 03:44:32 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Dec-21 03:44:32 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Dec-21 03:44:32 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:03.7 Dec = +19:58:52.1 2008-Dec-21 03:44:32 LOG3 track_source: Calling 'track_source AGES3193_p2_157 095203.7 195852.1 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Dec-21 03:44:32 START begin_task: Starting task 'sending tracking commands' 2008-Dec-21 03:44:32 LOG5 begin_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-Dec-21 03:44:32 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_157} INFO {Slewing to source 'AGES3193_p2_157' ...} 2008-Dec-21 03:44:32 INFO1 track_source: Starting to track AGES3193_p2_157 2008-Dec-21 03:44:32 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_157" 2008-Dec-21 03:44:32 LOG3 vw_send: To DATATAKING: set ra 095203.7 2008-Dec-21 03:44:32 LOG3 vw_send: To DATATAKING: set dec 195852.1 2008-Dec-21 03:44:32 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Dec-21 03:44:32 LOG3 vw_send: To DATATAKING: pnt tr 095203.7 195852.1 -CJ 2008-Dec-21 03:44:32 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Dec-21 03:44:32 STOP finish_task: Finishing task 'sending tracking commands' 2008-Dec-21 03:44:32 LOG5 finish_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-Dec-21 03:44:32 INFO2 finish_task: DONE finished sending: tracking commands 2008-Dec-21 03:44:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-21 03:44:32 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Dec-21 03:44:32 LOG5 end_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-Dec-21 03:44:32 START begin_task: Starting task 'waiting on telescope' 2008-Dec-21 03:44:32 LOG5 begin_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2008-Dec-21 03:44:32 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Dec-21 03:44:32 LOG3 waittrk: Start waittrk 5 2008-Dec-21 03:44:32 START begin_task: Starting task 'waiting on telescope movement' 2008-Dec-21 03:44:32 LOG5 begin_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2008-Dec-21 03:44:32 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631355370.0} 2008-Dec-21 03:44:32 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-21 03:44:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 03:44:32 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_157" 2008-Dec-21 03:44:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 03:44:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 03:44:32 LOG4 got_cormsg: From DATATAKING: set ra 095203.7 2008-Dec-21 03:44:32 LOG4 got_cormsg: From DATATAKING: set dec 195852.1 2008-Dec-21 03:44:32 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Dec-21 03:44:32 LOG4 got_cormsg: From DATATAKING: pnt tr 095203.7 195852.1 -CJ 2008-Dec-21 03:44:32 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Dec-21 03:44:32 LOG4 got_cormsg: From DATATAKING: 095203.7 2008-Dec-21 03:44:32 LOG4 got_cormsg: From DATATAKING: vw% 195852.1 2008-Dec-21 03:44:32 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2008-Dec-21 03:44:37 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Dec-21 03:44:37 LOG5 end_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2008-Dec-21 03:44:37 START begin_task: Starting task 'waiting on telescope on source' 2008-Dec-21 03:44:37 LOG5 begin_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2008-Dec-21 03:44:39 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Dec-21 03:44:39 LOG5 end_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2008-Dec-21 03:44:39 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Dec-21 03:44:39 INFO2 waittrk: Now tracking AGES3193_p2_157 2008-Dec-21 03:44:39 LOG4 waittrk: Current telescope position: Az = 256.93 ZA = 8.16 2008-Dec-21 03:44:39 STOP finish_task: Finishing task 'waiting on telescope' 2008-Dec-21 03:44:39 LOG5 finish_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2008-Dec-21 03:44:39 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Dec-21 03:44:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-21 03:44:39 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Dec-21 03:44:39 LOG5 end_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2008-Dec-21 03:44:39 START begin_task: Starting task 'adjusting WAPP power' 2008-Dec-21 03:44:39 LOG5 begin_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2008-Dec-21 03:44:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Dec-21 03:44:39 INFO2 adjust_power: Starting to adjust WAPP power 2008-Dec-21 03:44:39 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Dec-21 03:44:39 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Dec-21 03:44:39 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Dec-21 03:44:39 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Dec-21 03:44:39 LOG5 begin_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2008-Dec-21 03:44:39 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Dec-21 03:44:39 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Dec-21 03:44:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 03:44:42 LOG4 got_cormsg: From DATATAKING: DONE 2008-Dec-21 03:44:43 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Dec-21 03:44:43 LOG5 end_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2008-Dec-21 03:44:43 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Dec-21 03:44:43 START begin_task: Starting task 'adjusting WAPP power' 2008-Dec-21 03:44:43 LOG5 begin_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2008-Dec-21 03:44:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Dec-21 03:44:43 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Dec-21 03:44:43 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Dec-21 03:44:43 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Dec-21 03:44:43 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Dec-21 03:44:43 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Dec-21 03:44:43 LOG5 begin_task: Level: (5) ID = <10033> Status = 0 0 0 0 ok 2008-Dec-21 03:44:43 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Dec-21 03:44:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 03:44:43 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 7 0 dB 2008-Dec-21 03:44:43 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 3 dB 2008-Dec-21 03:44:43 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 1 dB --- beam 5: 5 5 dB 2008-Dec-21 03:44:43 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 3 dB --- beam 7: 2 3 dB 2008-Dec-21 03:44:43 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Dec-21 03:44:43 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Dec-21 03:44:43 LOG5 end_task: Level: (5) ID = <10033> Status = 0 0 0 0 ok 2008-Dec-21 03:44:43 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.929 0.929 ALFA beam 1: 0.914 0.109 2008-Dec-21 03:44:43 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.022 0.947 ALFA beam 3: 1.095 0.874 2008-Dec-21 03:44:43 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.068 0.890 ALFA beam 5: 1.130 0.949 2008-Dec-21 03:44:43 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.969 0.881 ALFA beam 7: 1.075 0.974 2008-Dec-21 03:44:43 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Dec-21 03:44:43 LOG5 finish_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2008-Dec-21 03:44:43 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Dec-21 03:44:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-21 03:44:43 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Dec-21 03:44:43 LOG5 end_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2008-Dec-21 03:44:43 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Dec-21 03:44:43 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Dec-21 03:44:43 LOG5 finish_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2008-Dec-21 03:44:43 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Dec-21 03:44:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-21 03:44:43 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Dec-21 03:44:43 LOG5 end_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2008-Dec-21 03:44:43 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 SS 2008-Dec-21 03:44:43 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 SS 2008-Dec-21 03:44:43 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 SS 2008-Dec-21 03:44:43 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 SS 2008-Dec-21 03:44:43 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20081221.a2048.0000.fits' is empty! 2008-Dec-21 03:44:43 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Dec-21 03:44:43 START begin_task: Starting task 'WAPP calibration' 2008-Dec-21 03:44:43 LOG5 begin_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2008-Dec-21 03:44:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Dec-21 03:44:44 START begin_task: Starting task 'selecting calibration type' 2008-Dec-21 03:44:44 LOG5 begin_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2008-Dec-21 03:44:44 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Dec-21 03:44:44 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Dec-21 03:44:44 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Dec-21 03:44:44 START begin_task: Starting task 'waiting on setcal' 2008-Dec-21 03:44:44 LOG5 begin_task: Level: (5) ID = <10036> Status = 0 0 0 0 ok 2008-Dec-21 03:44:44 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 SS' 2008-Dec-21 03:44:44 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Dec-21 03:44:44 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Dec-21 03:44:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 03:44:44 LOG4 got_cormsg: From DATATAKING: DONE 2008-Dec-21 03:44:44 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Dec-21 03:44:44 LOG5 end_task: Level: (5) ID = <10036> Status = 0 0 0 0 ok 2008-Dec-21 03:44:44 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Dec-21 03:44:44 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Dec-21 03:44:44 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Dec-21 03:44:44 START begin_task: Starting task 'waiting on command to ALFA' 2008-Dec-21 03:44:44 LOG5 begin_task: Level: (5) ID = <10037> Status = 0 0 0 0 ok 2008-Dec-21 03:44:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 03:44:44 LOG4 got_alfamon: From ALFAMON: ACK 2008-Dec-21 03:44:44 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Dec-21 03:44:44 LOG5 end_task: Level: (5) ID = <10037> Status = 0 0 0 0 ok 2008-Dec-21 03:44:44 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Dec-21 03:44:44 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Dec-21 03:44:44 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Dec-21 03:44:44 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Dec-21 03:44:44 START begin_task: Starting task 'waiting on command to ALFA' 2008-Dec-21 03:44:44 LOG5 begin_task: Level: (5) ID = <10038> Status = 0 0 0 0 ok 2008-Dec-21 03:44:44 LOG4 got_alfamon: From ALFAMON: ACK 2008-Dec-21 03:44:44 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Dec-21 03:44:44 LOG5 end_task: Level: (5) ID = <10038> Status = 0 0 0 0 ok 2008-Dec-21 03:44:44 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Dec-21 03:44:44 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Dec-21 03:44:44 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Dec-21 03:44:44 LOG5 end_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2008-Dec-21 03:44:44 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Dec-21 03:44:44 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Dec-21 03:44:44 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Dec-21 03:44:44 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Dec-21 03:44:44 LOG5 begin_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2008-Dec-21 03:44:44 LOG3 CALCONTROL-caltrig: Software trigger 2008-Dec-21 03:44:44 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Dec-21 03:44:44 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Dec-21 03:44:44 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Dec-21 03:44:44 LOG5 end_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2008-Dec-21 03:44:44 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Dec-21 03:44:44 LOG4 take_data: Calling 'take_data 5 5 CAL ON -' 2008-Dec-21 03:44:44 START begin_task: Starting task 'WAPP spectral observation' 2008-Dec-21 03:44:44 LOG5 begin_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2008-Dec-21 03:44:44 LOG5 log_alfabeam: Parameters: 9.8676944444444441 19.981138888888889 9.312028 2008.9751021623952 -59.500015 2008-Dec-21 03:44:44 LOG4 log_alfabeam: ALFABEAM 0 9.867694444444444 19.981138888888886 2008-Dec-21 03:44:44 LOG4 log_alfabeam: ALFABEAM 1 9.868700645970303 19.890845721990306 2008-Dec-21 03:44:44 LOG4 log_alfabeam: ALFABEAM 2 9.874676117681823 19.950563717675838 2008-Dec-21 03:44:44 LOG4 log_alfabeam: ALFABEAM 3 9.873625313433267 20.041804904157523 2008-Dec-21 03:44:44 LOG4 log_alfabeam: ALFABEAM 4 9.866615602114418 20.071277120350238 2008-Dec-21 03:44:44 LOG4 log_alfabeam: ALFABEAM 5 9.860704368679235 20.010583219159887 2008-Dec-21 03:44:44 LOG4 log_alfabeam: ALFABEAM 6 9.861738504107912 19.921390156630672 2008-Dec-21 03:44:44 INFO2 take_data: Starting WAPP scan: 835600088 2008-Dec-21 03:44:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Dec-21 03:44:45 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Dec-21 03:44:45 LOG5 begin_task: Level: (5) ID = <10041> Status = 0 0 0 0 ok 2008-Dec-21 03:44:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Dec-21 03:44:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2008-Dec-21 03:44:45 LOG4 check_wapp_levels: WAPP-1 power levels: 0.929 0.929 0.914 0.109 2008-Dec-21 03:44:45 LOG4 check_wapp_levels: WAPP-2 power levels: 1.022 0.947 1.095 0.874 2008-Dec-21 03:44:45 LOG4 check_wapp_levels: WAPP-3 power levels: 1.068 0.890 1.130 0.949 2008-Dec-21 03:44:45 LOG4 check_wapp_levels: WAPP-4 power levels: 0.969 0.881 1.075 0.974 2008-Dec-21 03:44:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 27886.00 2008-Dec-21 03:44:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.355370 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Dec-21 03:44:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.355370 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-21 03:44:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.355370 MHz Flip = 1 Band = 0 Mixer = 1009.160893 MHz 2008-Dec-21 03:44:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.355370 MHz Flip = 1 Band = 0 Mixer = 1056.430758 MHz 2008-Dec-21 03:44:51 INFO5 check_wapp_levels: WAPP power levels are between 0.116 and 1.552 (still bad) 2008-Dec-21 03:44:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.355370 MHz Flip = 1 Band = 0 Mixer = 963.569070 MHz 2008-Dec-21 03:44:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.355370 MHz Flip = 1 Band = 0 Mixer = 1170.000000 MHz 2008-Dec-21 03:44:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.355370 MHz Flip = 1 Band = 0 Mixer = 970.000000 MHz 2008-Dec-21 03:44:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.355370 MHz Flip = 1 Band = 0 Mixer = 1066.000000 MHz 2008-Dec-21 03:44:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.355370 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2008-Dec-21 03:44:51 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Dec-21 03:44:51 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Dec-21 03:44:51 LOG5 end_task: Level: (5) ID = <10041> Status = 0 0 0 0 ok 2008-Dec-21 03:44:51 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Dec-21 03:44:51 LOG5 end_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2008-Dec-21 03:44:51 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Dec-21 03:44:51 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Dec-21 03:44:51 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Dec-21 03:44:51 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Dec-21 03:44:51 LOG5 begin_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2008-Dec-21 03:44:51 LOG3 CALCONTROL-caltrig: Software trigger 2008-Dec-21 03:44:51 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Dec-21 03:44:51 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Dec-21 03:44:51 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Dec-21 03:44:51 LOG5 end_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2008-Dec-21 03:44:51 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Dec-21 03:44:51 LOG4 take_data: Calling 'take_data 5 5 CAL OFF -' 2008-Dec-21 03:44:51 START begin_task: Starting task 'WAPP spectral observation' 2008-Dec-21 03:44:51 LOG5 begin_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2008-Dec-21 03:44:51 LOG5 log_alfabeam: Parameters: 9.8676944444444441 19.981138888888889 9.313977 2008.9751023842118 -59.500015 2008-Dec-21 03:44:51 LOG4 log_alfabeam: ALFABEAM 0 9.867694444444441 19.981138888888900 2008-Dec-21 03:44:51 LOG4 log_alfabeam: ALFABEAM 1 9.868705306754906 19.890856094934644 2008-Dec-21 03:44:51 LOG4 log_alfabeam: ALFABEAM 2 9.874677726801780 19.950635438867081 2008-Dec-21 03:44:51 LOG4 log_alfabeam: ALFABEAM 3 9.873622046322058 20.041868964369932 2008-Dec-21 03:44:51 LOG4 log_alfabeam: ALFABEAM 4 9.866610702662978 20.071265460808863 2008-Dec-21 03:44:51 LOG4 log_alfabeam: ALFABEAM 5 9.860702802923296 20.010507794864864 2008-Dec-21 03:44:51 LOG4 log_alfabeam: ALFABEAM 6 9.861741622258005 19.921329082580790 2008-Dec-21 03:44:51 INFO2 take_data: Starting WAPP scan: 835600089 2008-Dec-21 03:44:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Dec-21 03:44:52 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Dec-21 03:44:52 LOG5 begin_task: Level: (5) ID = <10044> Status = 0 0 0 0 ok 2008-Dec-21 03:44:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Dec-21 03:44:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 27893.00 2008-Dec-21 03:44:57 INFO5 check_wapp_levels: WAPP power levels are between 0.116 and 1.559 (still bad) 2008-Dec-21 03:44:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.355370 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Dec-21 03:44:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.355370 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-21 03:44:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.355370 MHz Flip = 1 Band = 0 Mixer = 1009.160893 MHz 2008-Dec-21 03:44:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.355370 MHz Flip = 1 Band = 0 Mixer = 1056.430758 MHz 2008-Dec-21 03:44:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.355370 MHz Flip = 1 Band = 0 Mixer = 963.569070 MHz 2008-Dec-21 03:44:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.355370 MHz Flip = 1 Band = 0 Mixer = 1170.000000 MHz 2008-Dec-21 03:44:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.355370 MHz Flip = 1 Band = 0 Mixer = 970.000000 MHz 2008-Dec-21 03:44:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.355370 MHz Flip = 1 Band = 0 Mixer = 1066.000000 MHz 2008-Dec-21 03:44:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.355370 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2008-Dec-21 03:44:58 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Dec-21 03:44:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Dec-21 03:44:58 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Dec-21 03:44:58 LOG5 end_task: Level: (5) ID = <10044> Status = 0 0 0 0 ok 2008-Dec-21 03:44:58 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Dec-21 03:44:58 LOG5 end_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2008-Dec-21 03:44:58 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Dec-21 03:44:58 STOP finish_task: Finishing task 'WAPP calibration' 2008-Dec-21 03:44:58 LOG5 finish_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2008-Dec-21 03:44:58 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Dec-21 03:44:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-21 03:44:58 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Dec-21 03:44:58 LOG5 end_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2008-Dec-21 03:44:58 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Dec-21 03:44:58 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 257.46 and ZA = 8.18 2008-Dec-21 03:44:58 LOG3 track_source: Calling 'track_source AGES3193_p2_157 257.46 8.1848924969 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Dec-21 03:44:58 START begin_task: Starting task 'sending tracking commands' 2008-Dec-21 03:44:58 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2008-Dec-21 03:44:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_157} INFO {Slewing to source 'AGES3193_p2_157' ...} 2008-Dec-21 03:44:58 INFO1 track_source: Starting to track AGES3193_p2_157 2008-Dec-21 03:44:58 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_157" 2008-Dec-21 03:44:58 LOG3 vw_send: To DATATAKING: set ra 257.46 2008-Dec-21 03:44:58 LOG3 vw_send: To DATATAKING: set dec 8.1848924969 2008-Dec-21 03:44:58 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Dec-21 03:44:58 LOG3 vw_send: To DATATAKING: pnt tr 257.46 8.1848924969 -CF 2008-Dec-21 03:44:58 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Dec-21 03:44:58 STOP finish_task: Finishing task 'sending tracking commands' 2008-Dec-21 03:44:58 LOG5 finish_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2008-Dec-21 03:44:58 INFO2 finish_task: DONE finished sending: tracking commands 2008-Dec-21 03:44:59 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-21 03:44:59 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Dec-21 03:44:59 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2008-Dec-21 03:44:59 LOG1 fixed_driftmap: Parameters: HA = -00:34:00.3 Start = 09:19:31.3 LST = 09:18:57.3 diff = 34.0 secs 2008-Dec-21 03:44:59 INFO2 fixed_driftmap: Waiting 32 seconds for RA 9:53:32 2008-Dec-21 03:44:59 INFO2 lstwait: Waiting for 31.9 secs from LST 09:18:57 to LST 09:19:29 ... 2008-Dec-21 03:44:59 LOG4 send_obs_status: To obs_status: <1> TASKTIME 31.878878360121227 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Dec-21 03:44:59 START begin_task: Starting task 'waiting on wait on LST' 2008-Dec-21 03:44:59 LOG5 begin_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2008-Dec-21 03:44:59 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_157" 2008-Dec-21 03:44:59 LOG4 got_cormsg: From DATATAKING: set ra 257.46 2008-Dec-21 03:44:59 LOG4 got_cormsg: From DATATAKING: set dec 8.1848924969 2008-Dec-21 03:44:59 LOG4 got_cormsg: From DATATAKING: vw% 257.46 2008-Dec-21 03:44:59 LOG4 got_cormsg: From DATATAKING: vw% 8.1848924969 2008-Dec-21 03:44:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 03:44:59 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Dec-21 03:44:59 LOG4 got_cormsg: From DATATAKING: pnt tr 257.46 8.1848924969 -CF 2008-Dec-21 03:44:59 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Dec-21 03:44:59 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Dec-21 03:44:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 03:45:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2008-Dec-21 03:45:31 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Dec-21 03:45:31 LOG5 end_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2008-Dec-21 03:45:31 LOG4 lstwait: Finished waiting 0.12 seconds late 2008-Dec-21 03:45:31 INFO3 lstwait: Finished waiting 2008-Dec-21 03:45:31 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Dec-21 03:45:31 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Dec-21 03:45:31 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Dec-21 03:45:31 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Dec-21 03:45:31 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Dec-21 03:45:31 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ -' 2008-Dec-21 03:45:31 START begin_task: Starting task 'WAPP spectral observation' 2008-Dec-21 03:45:31 LOG5 begin_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2008-Dec-21 03:45:31 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Dec-21 03:45:31 INFO2 take_data: Starting WAPP scan: 835600090 2008-Dec-21 03:45:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Dec-21 03:45:31 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Dec-21 03:45:31 LOG5 begin_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2008-Dec-21 03:45:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Dec-21 03:45:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 27932.00 2008-Dec-21 03:45:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.355370 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Dec-21 03:45:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.355370 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-21 03:45:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.355370 MHz Flip = 1 Band = 0 Mixer = 1009.160893 MHz 2008-Dec-21 03:45:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.355370 MHz Flip = 1 Band = 0 Mixer = 1056.430758 MHz 2008-Dec-21 03:45:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.355370 MHz Flip = 1 Band = 0 Mixer = 963.569070 MHz 2008-Dec-21 03:45:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.355370 MHz Flip = 1 Band = 0 Mixer = 1170.000000 MHz 2008-Dec-21 03:45:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.355370 MHz Flip = 1 Band = 0 Mixer = 970.000000 MHz 2008-Dec-21 03:45:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.355370 MHz Flip = 1 Band = 0 Mixer = 1066.000000 MHz 2008-Dec-21 03:45:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.355370 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2008-Dec-21 03:45:33 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.129 (still bad) 2008-Dec-21 03:45:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2008-Dec-21 03:45:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2008-Dec-21 03:45:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2008-Dec-21 03:45:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2008-Dec-21 03:45:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2008-Dec-21 03:45:45 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.136 (still bad) 2008-Dec-21 03:45:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2008-Dec-21 03:45:47 LOG4 check_wapp_levels: WAPP-1 power levels: 0.946 0.929 0.910 0.110 2008-Dec-21 03:45:47 LOG4 check_wapp_levels: WAPP-2 power levels: 1.020 0.951 1.114 0.891 2008-Dec-21 03:45:47 LOG4 check_wapp_levels: WAPP-3 power levels: 1.089 0.915 1.132 0.951 2008-Dec-21 03:45:47 LOG4 check_wapp_levels: WAPP-4 power levels: 0.988 0.901 1.087 0.994 2008-Dec-21 03:45:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2008-Dec-21 03:45:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2008-Dec-21 03:45:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2008-Dec-21 03:45:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2008-Dec-21 03:45:58 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.135 (still bad) 2008-Dec-21 03:46:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2008-Dec-21 03:46:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2008-Dec-21 03:46:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2008-Dec-21 03:46:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2008-Dec-21 03:46:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2008-Dec-21 03:46:10 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.131 (still bad) 2008-Dec-21 03:46:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2008-Dec-21 03:46:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2008-Dec-21 03:46:16 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.132 (still bad) 2008-Dec-21 03:46:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2008-Dec-21 03:46:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2008-Dec-21 03:46:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2008-Dec-21 03:46:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2008-Dec-21 03:46:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2008-Dec-21 03:46:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2008-Dec-21 03:46:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2008-Dec-21 03:46:32 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.132 (still bad) 2008-Dec-21 03:46:34 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.132 (still bad) 2008-Dec-21 03:46:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2008-Dec-21 03:46:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2008-Dec-21 03:46:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2008-Dec-21 03:46:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2008-Dec-21 03:46:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2008-Dec-21 03:46:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2008-Dec-21 03:46:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2008-Dec-21 03:46:48 LOG4 check_wapp_levels: WAPP-1 power levels: 0.944 0.928 0.914 0.110 2008-Dec-21 03:46:48 LOG4 check_wapp_levels: WAPP-2 power levels: 1.020 0.950 1.113 0.892 2008-Dec-21 03:46:48 LOG4 check_wapp_levels: WAPP-3 power levels: 1.088 0.920 1.130 0.948 2008-Dec-21 03:46:48 LOG4 check_wapp_levels: WAPP-4 power levels: 0.988 0.901 1.087 0.994 2008-Dec-21 03:46:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2008-Dec-21 03:46:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2008-Dec-21 03:46:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2008-Dec-21 03:46:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2008-Dec-21 03:46:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2008-Dec-21 03:47:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2008-Dec-21 03:47:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2008-Dec-21 03:47:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2008-Dec-21 03:47:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2008-Dec-21 03:47:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2008-Dec-21 03:47:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2008-Dec-21 03:47:12 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.130 (still bad) 2008-Dec-21 03:47:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2008-Dec-21 03:47:16 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.131 (still bad) 2008-Dec-21 03:47:19 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.128 (still bad) 2008-Dec-21 03:47:21 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.130 (still bad) 2008-Dec-21 03:47:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2008-Dec-21 03:47:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2008-Dec-21 03:47:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2008-Dec-21 03:47:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2008-Dec-21 03:47:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2008-Dec-21 03:47:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2008-Dec-21 03:47:35 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.130 (still bad) 2008-Dec-21 03:47:37 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.133 (still bad) 2008-Dec-21 03:47:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2008-Dec-21 03:47:41 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.129 (still bad) 2008-Dec-21 03:47:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2008-Dec-21 03:47:45 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.136 (still bad) 2008-Dec-21 03:47:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2008-Dec-21 03:47:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2008-Dec-21 03:47:49 LOG4 check_wapp_levels: WAPP-1 power levels: 0.943 0.930 0.916 0.110 2008-Dec-21 03:47:49 LOG4 check_wapp_levels: WAPP-2 power levels: 1.020 0.949 1.114 0.892 2008-Dec-21 03:47:49 LOG4 check_wapp_levels: WAPP-3 power levels: 1.092 0.921 1.128 0.948 2008-Dec-21 03:47:49 LOG4 check_wapp_levels: WAPP-4 power levels: 0.988 0.900 1.087 0.993 2008-Dec-21 03:47:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2008-Dec-21 03:47:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2008-Dec-21 03:47:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2008-Dec-21 03:47:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2008-Dec-21 03:47:59 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.134 (still bad) 2008-Dec-21 03:48:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2008-Dec-21 03:48:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2008-Dec-21 03:48:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2008-Dec-21 03:48:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2008-Dec-21 03:48:09 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.141 (still bad) 2008-Dec-21 03:48:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2008-Dec-21 03:48:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2008-Dec-21 03:48:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2008-Dec-21 03:48:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2008-Dec-21 03:48:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2008-Dec-21 03:48:21 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.139 (still bad) 2008-Dec-21 03:48:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2008-Dec-21 03:48:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2008-Dec-21 03:48:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2008-Dec-21 03:48:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2008-Dec-21 03:48:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2008-Dec-21 03:48:33 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.137 (still bad) 2008-Dec-21 03:48:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2008-Dec-21 03:48:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2008-Dec-21 03:48:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2008-Dec-21 03:48:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2008-Dec-21 03:48:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2008-Dec-21 03:48:46 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.138 (still bad) 2008-Dec-21 03:48:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2008-Dec-21 03:48:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2008-Dec-21 03:48:50 LOG4 check_wapp_levels: WAPP-1 power levels: 0.948 0.931 0.912 0.110 2008-Dec-21 03:48:50 LOG4 check_wapp_levels: WAPP-2 power levels: 1.025 0.955 1.131 0.904 2008-Dec-21 03:48:50 LOG4 check_wapp_levels: WAPP-3 power levels: 1.094 0.923 1.130 0.948 2008-Dec-21 03:48:50 LOG4 check_wapp_levels: WAPP-4 power levels: 0.988 0.902 1.087 0.994 2008-Dec-21 03:48:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2008-Dec-21 03:48:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2008-Dec-21 03:48:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2008-Dec-21 03:48:58 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.141 (still bad) 2008-Dec-21 03:49:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2008-Dec-21 03:49:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2008-Dec-21 03:49:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2008-Dec-21 03:49:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2008-Dec-21 03:49:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2008-Dec-21 03:49:10 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.135 (still bad) 2008-Dec-21 03:49:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2008-Dec-21 03:49:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2008-Dec-21 03:49:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2008-Dec-21 03:49:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2008-Dec-21 03:49:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2008-Dec-21 03:49:22 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.141 (still bad) 2008-Dec-21 03:49:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2008-Dec-21 03:49:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2008-Dec-21 03:49:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.142 (still bad) 2008-Dec-21 03:49:30 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.144 (still bad) 2008-Dec-21 03:49:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.146 (still bad) 2008-Dec-21 03:49:34 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.146 (still bad) 2008-Dec-21 03:49:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.142 (still bad) 2008-Dec-21 03:49:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.141 (still bad) 2008-Dec-21 03:49:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.141 (still bad) 2008-Dec-21 03:49:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2008-Dec-21 03:49:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2008-Dec-21 03:49:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2008-Dec-21 03:49:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2008-Dec-21 03:49:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2008-Dec-21 03:49:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2008-Dec-21 03:49:52 LOG4 check_wapp_levels: WAPP-1 power levels: 0.939 0.927 0.913 0.110 2008-Dec-21 03:49:52 LOG4 check_wapp_levels: WAPP-2 power levels: 1.025 0.955 1.118 0.893 2008-Dec-21 03:49:52 LOG4 check_wapp_levels: WAPP-3 power levels: 1.092 0.922 1.134 0.949 2008-Dec-21 03:49:52 LOG4 check_wapp_levels: WAPP-4 power levels: 0.993 0.907 1.093 1.001 2008-Dec-21 03:49:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2008-Dec-21 03:49:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2008-Dec-21 03:49:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2008-Dec-21 03:50:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2008-Dec-21 03:50:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2008-Dec-21 03:50:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2008-Dec-21 03:50:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2008-Dec-21 03:50:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2008-Dec-21 03:50:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2008-Dec-21 03:50:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2008-Dec-21 03:50:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2008-Dec-21 03:50:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2008-Dec-21 03:50:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2008-Dec-21 03:50:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2008-Dec-21 03:50:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2008-Dec-21 03:50:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2008-Dec-21 03:50:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2008-Dec-21 03:50:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2008-Dec-21 03:50:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2008-Dec-21 03:50:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2008-Dec-21 03:50:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2008-Dec-21 03:50:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2008-Dec-21 03:50:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2008-Dec-21 03:50:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2008-Dec-21 03:50:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2008-Dec-21 03:50:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2008-Dec-21 03:50:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2008-Dec-21 03:50:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2008-Dec-21 03:50:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2008-Dec-21 03:50:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2008-Dec-21 03:50:53 LOG4 check_wapp_levels: WAPP-1 power levels: 0.974 0.960 0.912 0.110 2008-Dec-21 03:50:53 LOG4 check_wapp_levels: WAPP-2 power levels: 1.024 0.957 1.117 0.892 2008-Dec-21 03:50:53 LOG4 check_wapp_levels: WAPP-3 power levels: 1.094 0.920 1.131 0.948 2008-Dec-21 03:50:53 LOG4 check_wapp_levels: WAPP-4 power levels: 0.992 0.907 1.092 0.999 2008-Dec-21 03:50:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2008-Dec-21 03:50:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2008-Dec-21 03:50:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2008-Dec-21 03:51:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2008-Dec-21 03:51:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2008-Dec-21 03:51:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.141 (still bad) 2008-Dec-21 03:51:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.149 (still bad) 2008-Dec-21 03:51:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.163 (still bad) 2008-Dec-21 03:51:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.163 (still bad) 2008-Dec-21 03:51:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.165 (still bad) 2008-Dec-21 03:51:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.171 (still bad) 2008-Dec-21 03:51:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.168 (still bad) 2008-Dec-21 03:51:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.166 (still bad) 2008-Dec-21 03:51:21 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.165 (still bad) 2008-Dec-21 03:51:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.156 (still bad) 2008-Dec-21 03:51:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.145 (still bad) 2008-Dec-21 03:51:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.143 (still bad) 2008-Dec-21 03:51:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2008-Dec-21 03:51:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2008-Dec-21 03:51:33 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.141 (still bad) 2008-Dec-21 03:51:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2008-Dec-21 03:51:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2008-Dec-21 03:51:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2008-Dec-21 03:51:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2008-Dec-21 03:51:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2008-Dec-21 03:51:46 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.140 (still bad) 2008-Dec-21 03:51:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2008-Dec-21 03:51:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2008-Dec-21 03:51:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2008-Dec-21 03:51:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2008-Dec-21 03:51:54 LOG4 check_wapp_levels: WAPP-1 power levels: 0.936 0.928 0.911 0.110 2008-Dec-21 03:51:54 LOG4 check_wapp_levels: WAPP-2 power levels: 1.023 0.956 1.115 0.892 2008-Dec-21 03:51:54 LOG4 check_wapp_levels: WAPP-3 power levels: 1.092 0.918 1.134 0.949 2008-Dec-21 03:51:54 LOG4 check_wapp_levels: WAPP-4 power levels: 0.989 0.902 1.088 0.994 2008-Dec-21 03:51:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2008-Dec-21 03:51:58 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.135 (still bad) 2008-Dec-21 03:52:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2008-Dec-21 03:52:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2008-Dec-21 03:52:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2008-Dec-21 03:52:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2008-Dec-21 03:52:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2008-Dec-21 03:52:10 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.139 (still bad) 2008-Dec-21 03:52:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2008-Dec-21 03:52:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2008-Dec-21 03:52:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2008-Dec-21 03:52:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2008-Dec-21 03:52:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2008-Dec-21 03:52:22 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.137 (still bad) 2008-Dec-21 03:52:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2008-Dec-21 03:52:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2008-Dec-21 03:52:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2008-Dec-21 03:52:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2008-Dec-21 03:52:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2008-Dec-21 03:52:34 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.137 (still bad) 2008-Dec-21 03:52:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2008-Dec-21 03:52:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2008-Dec-21 03:52:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2008-Dec-21 03:52:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2008-Dec-21 03:52:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.144 (still bad) 2008-Dec-21 03:52:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.153 (still bad) 2008-Dec-21 03:52:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.150 (still bad) 2008-Dec-21 03:52:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.151 (still bad) 2008-Dec-21 03:52:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.150 (still bad) 2008-Dec-21 03:52:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.144 (still bad) 2008-Dec-21 03:52:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2008-Dec-21 03:52:57 LOG4 check_wapp_levels: WAPP-1 power levels: 0.940 0.930 0.912 0.110 2008-Dec-21 03:52:57 LOG4 check_wapp_levels: WAPP-2 power levels: 1.021 0.957 1.139 0.909 2008-Dec-21 03:52:57 LOG4 check_wapp_levels: WAPP-3 power levels: 1.089 0.917 1.132 0.950 2008-Dec-21 03:52:57 LOG4 check_wapp_levels: WAPP-4 power levels: 0.986 0.903 1.087 0.996 2008-Dec-21 03:52:59 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.138 (still bad) 2008-Dec-21 03:53:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2008-Dec-21 03:53:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2008-Dec-21 03:53:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2008-Dec-21 03:53:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2008-Dec-21 03:53:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2008-Dec-21 03:53:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2008-Dec-21 03:53:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2008-Dec-21 03:53:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.141 (still bad) 2008-Dec-21 03:53:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.143 (still bad) 2008-Dec-21 03:53:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2008-Dec-21 03:53:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2008-Dec-21 03:53:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2008-Dec-21 03:53:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2008-Dec-21 03:53:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2008-Dec-21 03:53:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2008-Dec-21 03:53:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2008-Dec-21 03:53:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2008-Dec-21 03:53:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.143 (still bad) 2008-Dec-21 03:53:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2008-Dec-21 03:53:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2008-Dec-21 03:53:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2008-Dec-21 03:53:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2008-Dec-21 03:53:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2008-Dec-21 03:53:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.144 (still bad) 2008-Dec-21 03:53:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2008-Dec-21 03:53:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.141 (still bad) 2008-Dec-21 03:53:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.145 (still bad) 2008-Dec-21 03:53:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.142 (still bad) 2008-Dec-21 03:53:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.142 (still bad) 2008-Dec-21 03:53:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2008-Dec-21 03:53:59 LOG4 check_wapp_levels: WAPP-1 power levels: 0.943 0.933 0.918 0.110 2008-Dec-21 03:53:59 LOG4 check_wapp_levels: WAPP-2 power levels: 1.021 0.958 1.120 0.894 2008-Dec-21 03:53:59 LOG4 check_wapp_levels: WAPP-3 power levels: 1.091 0.918 1.147 0.961 2008-Dec-21 03:53:59 LOG4 check_wapp_levels: WAPP-4 power levels: 0.989 0.903 1.089 0.997 2008-Dec-21 03:54:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2008-Dec-21 03:54:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2008-Dec-21 03:54:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2008-Dec-21 03:54:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2008-Dec-21 03:54:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2008-Dec-21 03:54:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2008-Dec-21 03:54:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2008-Dec-21 03:54:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2008-Dec-21 03:54:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2008-Dec-21 03:54:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2008-Dec-21 03:54:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2008-Dec-21 03:54:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2008-Dec-21 03:54:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2008-Dec-21 03:54:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2008-Dec-21 03:54:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2008-Dec-21 03:54:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2008-Dec-21 03:54:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2008-Dec-21 03:54:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2008-Dec-21 03:54:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2008-Dec-21 03:54:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2008-Dec-21 03:54:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2008-Dec-21 03:54:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2008-Dec-21 03:54:46 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.138 (still bad) 2008-Dec-21 03:54:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2008-Dec-21 03:54:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2008-Dec-21 03:54:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2008-Dec-21 03:54:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2008-Dec-21 03:54:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2008-Dec-21 03:54:58 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.138 (still bad) 2008-Dec-21 03:55:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2008-Dec-21 03:55:00 LOG4 check_wapp_levels: WAPP-1 power levels: 0.946 0.938 0.933 0.110 2008-Dec-21 03:55:00 LOG4 check_wapp_levels: WAPP-2 power levels: 1.050 0.978 1.122 0.896 2008-Dec-21 03:55:00 LOG4 check_wapp_levels: WAPP-3 power levels: 1.088 0.913 1.138 0.954 2008-Dec-21 03:55:00 LOG4 check_wapp_levels: WAPP-4 power levels: 0.987 0.902 1.088 0.994 2008-Dec-21 03:55:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2008-Dec-21 03:55:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.140 (still bad) 2008-Dec-21 03:55:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2008-Dec-21 03:55:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2008-Dec-21 03:55:10 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.135 (still bad) 2008-Dec-21 03:55:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2008-Dec-21 03:55:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2008-Dec-21 03:55:16 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.135 (still bad) 2008-Dec-21 03:55:18 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.135 (still bad) 2008-Dec-21 03:55:20 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.138 (still bad) 2008-Dec-21 03:55:22 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.137 (still bad) 2008-Dec-21 03:55:24 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.136 (still bad) 2008-Dec-21 03:55:26 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.137 (still bad) 2008-Dec-21 03:55:28 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.136 (still bad) 2008-Dec-21 03:55:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2008-Dec-21 03:55:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2008-Dec-21 03:55:34 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.138 (still bad) 2008-Dec-21 03:55:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2008-Dec-21 03:55:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2008-Dec-21 03:55:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2008-Dec-21 03:55:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2008-Dec-21 03:55:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2008-Dec-21 03:55:47 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.137 (still bad) 2008-Dec-21 03:55:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2008-Dec-21 03:55:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2008-Dec-21 03:55:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2008-Dec-21 03:55:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2008-Dec-21 03:55:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2008-Dec-21 03:55:59 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.138 (still bad) 2008-Dec-21 03:56:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2008-Dec-21 03:56:01 LOG4 check_wapp_levels: WAPP-1 power levels: 0.948 0.938 0.916 0.110 2008-Dec-21 03:56:01 LOG4 check_wapp_levels: WAPP-2 power levels: 1.020 0.953 1.120 0.894 2008-Dec-21 03:56:01 LOG4 check_wapp_levels: WAPP-3 power levels: 1.084 0.911 1.138 0.955 2008-Dec-21 03:56:01 LOG4 check_wapp_levels: WAPP-4 power levels: 1.030 0.945 1.135 1.042 2008-Dec-21 03:56:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.142 (still bad) 2008-Dec-21 03:56:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.145 (still bad) 2008-Dec-21 03:56:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.150 (still bad) 2008-Dec-21 03:56:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.152 (still bad) 2008-Dec-21 03:56:11 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.155 (still bad) 2008-Dec-21 03:56:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.156 (still bad) 2008-Dec-21 03:56:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.158 (still bad) 2008-Dec-21 03:56:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.153 (still bad) 2008-Dec-21 03:56:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.152 (still bad) 2008-Dec-21 03:56:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.145 (still bad) 2008-Dec-21 03:56:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.143 (still bad) 2008-Dec-21 03:56:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.140 (still bad) 2008-Dec-21 03:56:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2008-Dec-21 03:56:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2008-Dec-21 03:56:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2008-Dec-21 03:56:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2008-Dec-21 03:56:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2008-Dec-21 03:56:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2008-Dec-21 03:56:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2008-Dec-21 03:56:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2008-Dec-21 03:56:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2008-Dec-21 03:56:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2008-Dec-21 03:56:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.140 (still bad) 2008-Dec-21 03:56:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2008-Dec-21 03:56:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2008-Dec-21 03:56:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2008-Dec-21 03:56:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2008-Dec-21 03:56:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2008-Dec-21 03:56:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2008-Dec-21 03:57:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2008-Dec-21 03:57:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2008-Dec-21 03:57:04 LOG4 check_wapp_levels: WAPP-1 power levels: 0.941 0.934 0.918 0.110 2008-Dec-21 03:57:04 LOG4 check_wapp_levels: WAPP-2 power levels: 1.021 0.951 1.118 0.892 2008-Dec-21 03:57:04 LOG4 check_wapp_levels: WAPP-3 power levels: 1.083 0.912 1.139 0.953 2008-Dec-21 03:57:04 LOG4 check_wapp_levels: WAPP-4 power levels: 0.987 0.901 1.088 0.994 2008-Dec-21 03:57:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.140 (still bad) 2008-Dec-21 03:57:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2008-Dec-21 03:57:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2008-Dec-21 03:57:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2008-Dec-21 03:57:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2008-Dec-21 03:57:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2008-Dec-21 03:57:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2008-Dec-21 03:57:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2008-Dec-21 03:57:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2008-Dec-21 03:57:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2008-Dec-21 03:57:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2008-Dec-21 03:57:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2008-Dec-21 03:57:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2008-Dec-21 03:57:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2008-Dec-21 03:57:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.145 (still bad) 2008-Dec-21 03:57:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.140 (still bad) 2008-Dec-21 03:57:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2008-Dec-21 03:57:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2008-Dec-21 03:57:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2008-Dec-21 03:57:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2008-Dec-21 03:57:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.143 (still bad) 2008-Dec-21 03:57:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2008-Dec-21 03:57:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2008-Dec-21 03:57:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2008-Dec-21 03:57:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2008-Dec-21 03:57:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2008-Dec-21 03:57:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.141 (still bad) 2008-Dec-21 03:58:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2008-Dec-21 03:58:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2008-Dec-21 03:58:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2008-Dec-21 03:58:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2008-Dec-21 03:58:06 LOG4 check_wapp_levels: WAPP-1 power levels: 0.943 0.933 0.912 0.110 2008-Dec-21 03:58:06 LOG4 check_wapp_levels: WAPP-2 power levels: 1.021 0.948 1.119 0.892 2008-Dec-21 03:58:06 LOG4 check_wapp_levels: WAPP-3 power levels: 1.078 0.911 1.138 0.952 2008-Dec-21 03:58:06 LOG4 check_wapp_levels: WAPP-4 power levels: 0.986 0.900 1.088 0.994 2008-Dec-21 03:58:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2008-Dec-21 03:58:10 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.144 (still bad) 2008-Dec-21 03:58:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2008-Dec-21 03:58:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2008-Dec-21 03:58:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2008-Dec-21 03:58:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2008-Dec-21 03:58:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2008-Dec-21 03:58:22 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.143 (still bad) 2008-Dec-21 03:58:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2008-Dec-21 03:58:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2008-Dec-21 03:58:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2008-Dec-21 03:58:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2008-Dec-21 03:58:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2008-Dec-21 03:58:35 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.143 (still bad) 2008-Dec-21 03:58:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2008-Dec-21 03:58:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2008-Dec-21 03:58:41 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.137 (still bad) 2008-Dec-21 03:58:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2008-Dec-21 03:58:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2008-Dec-21 03:58:47 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.143 (still bad) 2008-Dec-21 03:58:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2008-Dec-21 03:58:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2008-Dec-21 03:58:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2008-Dec-21 03:58:54 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 03:58:54.298 (seconds: 14334.298)!} 2008-Dec-21 03:58:54 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 03:58:54.298 (seconds: 14334.298)! 2008-Dec-21 03:58:55 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 14333.0 to 14334.0! 2008-Dec-21 03:58:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2008-Dec-21 03:58:56 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (14333.0 - 14335.0)! 2008-Dec-21 03:58:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2008-Dec-21 03:58:59 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.145 (still bad) 2008-Dec-21 03:59:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2008-Dec-21 03:59:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2008-Dec-21 03:59:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2008-Dec-21 03:59:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2008-Dec-21 03:59:07 LOG4 check_wapp_levels: WAPP-1 power levels: 0.946 0.934 0.913 0.110 2008-Dec-21 03:59:07 LOG4 check_wapp_levels: WAPP-2 power levels: 1.019 0.947 1.117 0.892 2008-Dec-21 03:59:07 LOG4 check_wapp_levels: WAPP-3 power levels: 1.081 0.911 1.138 0.951 2008-Dec-21 03:59:07 LOG4 check_wapp_levels: WAPP-4 power levels: 0.987 0.900 1.091 0.994 2008-Dec-21 03:59:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2008-Dec-21 03:59:11 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.138 (still bad) 2008-Dec-21 03:59:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2008-Dec-21 03:59:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2008-Dec-21 03:59:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2008-Dec-21 03:59:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2008-Dec-21 03:59:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2008-Dec-21 03:59:23 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.139 (still bad) 2008-Dec-21 03:59:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2008-Dec-21 03:59:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2008-Dec-21 03:59:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.140 (still bad) 2008-Dec-21 03:59:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2008-Dec-21 03:59:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2008-Dec-21 03:59:35 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.139 (still bad) 2008-Dec-21 03:59:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2008-Dec-21 03:59:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2008-Dec-21 03:59:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2008-Dec-21 03:59:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2008-Dec-21 03:59:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2008-Dec-21 03:59:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2008-Dec-21 03:59:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2008-Dec-21 03:59:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2008-Dec-21 03:59:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2008-Dec-21 03:59:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2008-Dec-21 03:59:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2008-Dec-21 04:00:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2008-Dec-21 04:00:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2008-Dec-21 04:00:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2008-Dec-21 04:00:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2008-Dec-21 04:00:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2008-Dec-21 04:00:08 LOG4 check_wapp_levels: WAPP-1 power levels: 0.943 0.933 0.916 0.110 2008-Dec-21 04:00:08 LOG4 check_wapp_levels: WAPP-2 power levels: 1.023 0.952 1.120 0.893 2008-Dec-21 04:00:08 LOG4 check_wapp_levels: WAPP-3 power levels: 1.081 0.911 1.136 0.953 2008-Dec-21 04:00:08 LOG4 check_wapp_levels: WAPP-4 power levels: 0.987 0.901 1.091 0.996 2008-Dec-21 04:00:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2008-Dec-21 04:00:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2008-Dec-21 04:00:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2008-Dec-21 04:00:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2008-Dec-21 04:00:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2008-Dec-21 04:00:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2008-Dec-21 04:00:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2008-Dec-21 04:00:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2008-Dec-21 04:00:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2008-Dec-21 04:00:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2008-Dec-21 04:00:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2008-Dec-21 04:00:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2008-Dec-21 04:00:34 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.137 (still bad) 2008-Dec-21 04:00:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.141 (still bad) 2008-Dec-21 04:00:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2008-Dec-21 04:00:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2008-Dec-21 04:00:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2008-Dec-21 04:00:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2008-Dec-21 04:00:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.140 (still bad) 2008-Dec-21 04:00:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2008-Dec-21 04:00:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2008-Dec-21 04:00:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2008-Dec-21 04:00:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2008-Dec-21 04:00:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2008-Dec-21 04:00:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2008-Dec-21 04:01:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2008-Dec-21 04:01:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2008-Dec-21 04:01:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.140 (still bad) 2008-Dec-21 04:01:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2008-Dec-21 04:01:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2008-Dec-21 04:01:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2008-Dec-21 04:01:10 LOG4 check_wapp_levels: WAPP-1 power levels: 0.946 0.935 0.920 0.110 2008-Dec-21 04:01:10 LOG4 check_wapp_levels: WAPP-2 power levels: 1.028 0.951 1.126 0.898 2008-Dec-21 04:01:10 LOG4 check_wapp_levels: WAPP-3 power levels: 1.085 0.913 1.135 0.955 2008-Dec-21 04:01:10 LOG4 check_wapp_levels: WAPP-4 power levels: 0.991 0.902 1.092 0.995 2008-Dec-21 04:01:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2008-Dec-21 04:01:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2008-Dec-21 04:01:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.140 (still bad) 2008-Dec-21 04:01:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2008-Dec-21 04:01:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2008-Dec-21 04:01:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.140 (still bad) 2008-Dec-21 04:01:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2008-Dec-21 04:01:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2008-Dec-21 04:01:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2008-Dec-21 04:01:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2008-Dec-21 04:01:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2008-Dec-21 04:01:35 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.137 (still bad) 2008-Dec-21 04:01:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2008-Dec-21 04:01:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2008-Dec-21 04:01:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2008-Dec-21 04:01:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2008-Dec-21 04:01:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2008-Dec-21 04:01:47 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.139 (still bad) 2008-Dec-21 04:01:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.140 (still bad) 2008-Dec-21 04:01:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2008-Dec-21 04:01:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.140 (still bad) 2008-Dec-21 04:01:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2008-Dec-21 04:01:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.141 (still bad) 2008-Dec-21 04:01:59 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.141 (still bad) 2008-Dec-21 04:02:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.143 (still bad) 2008-Dec-21 04:02:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2008-Dec-21 04:02:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.144 (still bad) 2008-Dec-21 04:02:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2008-Dec-21 04:02:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.140 (still bad) 2008-Dec-21 04:02:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2008-Dec-21 04:02:11 LOG4 check_wapp_levels: WAPP-1 power levels: 0.947 0.935 0.919 0.111 2008-Dec-21 04:02:11 LOG4 check_wapp_levels: WAPP-2 power levels: 1.024 0.949 1.124 0.897 2008-Dec-21 04:02:11 LOG4 check_wapp_levels: WAPP-3 power levels: 1.085 0.913 1.142 0.956 2008-Dec-21 04:02:11 LOG4 check_wapp_levels: WAPP-4 power levels: 0.993 0.908 1.098 1.001 2008-Dec-21 04:02:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2008-Dec-21 04:02:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2008-Dec-21 04:02:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2008-Dec-21 04:02:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2008-Dec-21 04:02:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2008-Dec-21 04:02:23 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.140 (still bad) 2008-Dec-21 04:02:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2008-Dec-21 04:02:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2008-Dec-21 04:02:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.141 (still bad) 2008-Dec-21 04:02:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2008-Dec-21 04:02:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2008-Dec-21 04:02:35 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.144 (still bad) 2008-Dec-21 04:02:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2008-Dec-21 04:02:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2008-Dec-21 04:02:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2008-Dec-21 04:02:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2008-Dec-21 04:02:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2008-Dec-21 04:02:48 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.143 (still bad) 2008-Dec-21 04:02:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2008-Dec-21 04:02:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2008-Dec-21 04:02:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2008-Dec-21 04:02:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2008-Dec-21 04:02:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2008-Dec-21 04:03:00 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.139 (still bad) 2008-Dec-21 04:03:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2008-Dec-21 04:03:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.140 (still bad) 2008-Dec-21 04:03:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2008-Dec-21 04:03:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2008-Dec-21 04:03:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2008-Dec-21 04:03:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2008-Dec-21 04:03:12 LOG4 check_wapp_levels: WAPP-1 power levels: 0.942 0.933 0.915 0.110 2008-Dec-21 04:03:12 LOG4 check_wapp_levels: WAPP-2 power levels: 1.022 0.948 1.121 0.893 2008-Dec-21 04:03:12 LOG4 check_wapp_levels: WAPP-3 power levels: 1.085 0.915 1.139 0.953 2008-Dec-21 04:03:12 LOG4 check_wapp_levels: WAPP-4 power levels: 0.989 0.904 1.092 0.997 2008-Dec-21 04:03:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2008-Dec-21 04:03:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2008-Dec-21 04:03:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2008-Dec-21 04:03:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2008-Dec-21 04:03:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2008-Dec-21 04:03:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2008-Dec-21 04:03:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2008-Dec-21 04:03:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2008-Dec-21 04:03:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2008-Dec-21 04:03:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2008-Dec-21 04:03:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2008-Dec-21 04:03:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.142 (still bad) 2008-Dec-21 04:03:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2008-Dec-21 04:03:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2008-Dec-21 04:03:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2008-Dec-21 04:03:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2008-Dec-21 04:03:46 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.136 (still bad) 2008-Dec-21 04:03:48 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.142 (still bad) 2008-Dec-21 04:03:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2008-Dec-21 04:03:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2008-Dec-21 04:03:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2008-Dec-21 04:03:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2008-Dec-21 04:03:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2008-Dec-21 04:04:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.140 (still bad) 2008-Dec-21 04:04:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2008-Dec-21 04:04:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2008-Dec-21 04:04:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2008-Dec-21 04:04:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2008-Dec-21 04:04:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.142 (still bad) 2008-Dec-21 04:04:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2008-Dec-21 04:04:13 LOG4 check_wapp_levels: WAPP-1 power levels: 0.946 0.933 0.917 0.110 2008-Dec-21 04:04:13 LOG4 check_wapp_levels: WAPP-2 power levels: 1.022 0.946 1.121 0.894 2008-Dec-21 04:04:13 LOG4 check_wapp_levels: WAPP-3 power levels: 1.083 0.912 1.136 0.952 2008-Dec-21 04:04:13 LOG4 check_wapp_levels: WAPP-4 power levels: 0.994 0.908 1.097 1.002 2008-Dec-21 04:04:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2008-Dec-21 04:04:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2008-Dec-21 04:04:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2008-Dec-21 04:04:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2008-Dec-21 04:04:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.144 (still bad) 2008-Dec-21 04:04:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2008-Dec-21 04:04:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2008-Dec-21 04:04:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.140 (still bad) 2008-Dec-21 04:04:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.141 (still bad) 2008-Dec-21 04:04:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.140 (still bad) 2008-Dec-21 04:04:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.147 (still bad) 2008-Dec-21 04:04:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.140 (still bad) 2008-Dec-21 04:04:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.141 (still bad) 2008-Dec-21 04:04:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.142 (still bad) 2008-Dec-21 04:04:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2008-Dec-21 04:04:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2008-Dec-21 04:04:47 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.144 (still bad) 2008-Dec-21 04:04:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2008-Dec-21 04:04:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2008-Dec-21 04:04:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2008-Dec-21 04:04:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2008-Dec-21 04:04:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2008-Dec-21 04:04:59 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.143 (still bad) 2008-Dec-21 04:05:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2008-Dec-21 04:05:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2008-Dec-21 04:05:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2008-Dec-21 04:05:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2008-Dec-21 04:05:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2008-Dec-21 04:05:11 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.142 (still bad) 2008-Dec-21 04:05:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2008-Dec-21 04:05:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2008-Dec-21 04:05:15 LOG4 check_wapp_levels: WAPP-1 power levels: 0.943 0.932 0.917 0.110 2008-Dec-21 04:05:15 LOG4 check_wapp_levels: WAPP-2 power levels: 1.023 0.948 1.116 0.893 2008-Dec-21 04:05:15 LOG4 check_wapp_levels: WAPP-3 power levels: 1.083 0.914 1.137 0.949 2008-Dec-21 04:05:15 LOG4 check_wapp_levels: WAPP-4 power levels: 0.987 0.904 1.089 0.997 2008-Dec-21 04:05:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2008-Dec-21 04:05:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2008-Dec-21 04:05:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2008-Dec-21 04:05:23 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.144 (still bad) 2008-Dec-21 04:05:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2008-Dec-21 04:05:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2008-Dec-21 04:05:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.140 (still bad) 2008-Dec-21 04:05:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2008-Dec-21 04:05:32 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Dec-21 04:05:32 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Dec-21 04:05:32 LOG5 end_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2008-Dec-21 04:05:32 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Dec-21 04:05:32 LOG5 end_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2008-Dec-21 04:05:32 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Dec-21 04:05:32 LOG5 finish_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2008-Dec-21 04:05:32 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Dec-21 04:05:32 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Dec-21 04:05:32 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Dec-21 04:05:32 LOG5 end_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2008-Dec-21 04:05:32 COMMAND run_command_line: EXECUTING command 12: 'ENDIF' 2008-Dec-21 04:05:32 COMMAND run_command_line: EXECUTING command 15: 'IF LSTSLEW(AGES3193_p2_159) < 094231 THEN' 2008-Dec-21 04:05:33 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p2_159) < 094231 2008-Dec-21 04:05:33 INFO5 is_if_valid: Condition parsed as: 9.6913096666666672 < 9.7086111111111109 2008-Dec-21 04:05:33 COMMAND run_command_line: EXECUTING command 16: 'FIXEDDRIFT az=238.98 alfaangle=-36.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_159 ra=95300.00 dec=195600.00' 2008-Dec-21 04:05:33 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Dec-21 04:05:33 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Dec-21 04:05:33 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 238.98 -36.8 hcorcal 5 tracking no first 1 AGES3193_p2_159 95300.00 195600.00 J 8500.0 Heliocentric velocity(optical)' 2008-Dec-21 04:05:33 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Dec-21 04:05:33 LOG5 begin_task: Level: (2) ID = <10049> Status = 0 0 0 0 ok 2008-Dec-21 04:05:33 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES3193_p2_157' 2008-Dec-21 04:05:33 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Dec-21 04:05:33 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p2_159} 2008-Dec-21 04:05:33 INFO3 fixed_driftmap: Sending telescope to Az = 238.98 and ZA = 3.02 2008-Dec-21 04:05:33 LOG3 track_source: Calling 'track_source AGES3193_p2_159 238.98 3.0174356671 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Dec-21 04:05:33 START begin_task: Starting task 'sending tracking commands' 2008-Dec-21 04:05:33 LOG5 begin_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2008-Dec-21 04:05:33 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_159} INFO {Slewing to source 'AGES3193_p2_159' ...} 2008-Dec-21 04:05:33 INFO1 track_source: Starting to track AGES3193_p2_159 2008-Dec-21 04:05:33 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_159" 2008-Dec-21 04:05:33 LOG3 vw_send: To DATATAKING: set ra 238.98 2008-Dec-21 04:05:33 LOG3 vw_send: To DATATAKING: set dec 3.0174356671 2008-Dec-21 04:05:33 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Dec-21 04:05:33 LOG3 vw_send: To DATATAKING: pnt tr 238.98 3.0174356671 -CF 2008-Dec-21 04:05:33 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Dec-21 04:05:33 STOP finish_task: Finishing task 'sending tracking commands' 2008-Dec-21 04:05:33 LOG5 finish_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2008-Dec-21 04:05:33 INFO2 finish_task: DONE finished sending: tracking commands 2008-Dec-21 04:05:33 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-21 04:05:33 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Dec-21 04:05:33 LOG5 end_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2008-Dec-21 04:05:33 START begin_task: Starting task 'rotate ALFA to -36.8 degrees' 2008-Dec-21 04:05:33 LOG5 begin_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2008-Dec-21 04:05:33 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -36.8 degrees ...} 2008-Dec-21 04:05:33 INFO2 rotate_alfa: ALFA commanded to -36.8 degrees 2008-Dec-21 04:05:33 LOG3 sock_errsend: To ALFAMOTOR: POSITION -36.8 REPLY 2008-Dec-21 04:05:34 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Dec-21 04:05:34 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Dec-21 04:05:34 LOG5 begin_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2008-Dec-21 04:05:34 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_159" 2008-Dec-21 04:05:34 LOG4 got_cormsg: From DATATAKING: set ra 238.98 2008-Dec-21 04:05:34 LOG4 got_cormsg: From DATATAKING: set dec 3.0174356671 2008-Dec-21 04:05:34 LOG4 got_cormsg: From DATATAKING: vw% 238.98 2008-Dec-21 04:05:34 LOG4 got_cormsg: From DATATAKING: vw% 3.0174356671 2008-Dec-21 04:05:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 04:05:34 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Dec-21 04:05:34 LOG4 got_cormsg: From DATATAKING: pnt tr 238.98 3.0174356671 -CF 2008-Dec-21 04:05:34 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Dec-21 04:05:34 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Dec-21 04:05:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 04:05:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2008-Dec-21 04:05:47 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Dec-21 04:05:47 INFO3 alfa_motor: ALFA rotator in-position -36.80 degrees 2008-Dec-21 04:05:47 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Dec-21 04:05:47 LOG5 end_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2008-Dec-21 04:05:47 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Dec-21 04:05:47 STOP finish_task: Finishing task 'rotate ALFA to -36.8 degrees' 2008-Dec-21 04:05:47 LOG5 finish_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2008-Dec-21 04:05:47 INFO2 finish_task: DONE finished configuration: rotating ALFA to -36.8 degrees 2008-Dec-21 04:05:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-21 04:05:47 STOP end_task: Finishing task 'rotate ALFA to -36.8 degrees' with status 'OK' 2008-Dec-21 04:05:47 LOG5 end_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2008-Dec-21 04:05:47 START begin_task: Starting task 'waiting on telescope' 2008-Dec-21 04:05:47 LOG5 begin_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2008-Dec-21 04:05:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Dec-21 04:05:47 LOG3 waittrk: Start waittrk 5 2008-Dec-21 04:05:47 START begin_task: Starting task 'waiting on telescope movement' 2008-Dec-21 04:05:47 LOG5 begin_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2008-Dec-21 04:05:53 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Dec-21 04:05:53 LOG5 end_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2008-Dec-21 04:05:53 START begin_task: Starting task 'waiting on telescope on source' 2008-Dec-21 04:05:53 LOG5 begin_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2008-Dec-21 04:07:48 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Dec-21 04:07:48 LOG5 end_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2008-Dec-21 04:07:48 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Dec-21 04:07:48 INFO2 waittrk: Now tracking AGES3193_p2_159 2008-Dec-21 04:07:48 LOG4 waittrk: Current telescope position: Az = 238.03 ZA = 3.01 2008-Dec-21 04:07:48 STOP finish_task: Finishing task 'waiting on telescope' 2008-Dec-21 04:07:48 LOG5 finish_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2008-Dec-21 04:07:48 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Dec-21 04:07:48 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-21 04:07:48 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Dec-21 04:07:48 LOG5 end_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2008-Dec-21 04:07:48 START begin_task: Starting task 'selecting calibration type' 2008-Dec-21 04:07:48 LOG5 begin_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2008-Dec-21 04:07:48 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Dec-21 04:07:48 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Dec-21 04:07:48 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Dec-21 04:07:48 START begin_task: Starting task 'waiting on setcal' 2008-Dec-21 04:07:48 LOG5 begin_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2008-Dec-21 04:07:48 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Dec-21 04:07:48 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Dec-21 04:07:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 04:07:49 LOG4 got_cormsg: From DATATAKING: DONE 2008-Dec-21 04:07:49 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Dec-21 04:07:49 LOG5 end_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2008-Dec-21 04:07:49 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Dec-21 04:07:49 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Dec-21 04:07:49 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Dec-21 04:07:49 START begin_task: Starting task 'waiting on command to ALFA' 2008-Dec-21 04:07:49 LOG5 begin_task: Level: (4) ID = <10058> Status = 0 0 0 0 ok 2008-Dec-21 04:07:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 04:07:50 LOG4 got_alfamon: From ALFAMON: ACK 2008-Dec-21 04:07:50 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Dec-21 04:07:50 LOG5 end_task: Level: (4) ID = <10058> Status = 0 0 0 0 ok 2008-Dec-21 04:07:50 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Dec-21 04:07:50 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Dec-21 04:07:50 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Dec-21 04:07:50 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Dec-21 04:07:50 START begin_task: Starting task 'waiting on command to ALFA' 2008-Dec-21 04:07:50 LOG5 begin_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2008-Dec-21 04:07:50 LOG4 got_alfamon: From ALFAMON: ACK 2008-Dec-21 04:07:50 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Dec-21 04:07:50 LOG5 end_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2008-Dec-21 04:07:50 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Dec-21 04:07:50 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Dec-21 04:07:50 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Dec-21 04:07:50 LOG5 end_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2008-Dec-21 04:07:50 LOG5 dopset_later: Calling 'dopset_later 38.496598665867843' 2008-Dec-21 04:07:50 INFO3 dopset_later: Setting Doppler correction for 04:08:28 (38.5 seconds from now) 2008-Dec-21 04:07:50 LOG5 antvel: Calling 'antvel 238.980000 3.017436 F 38.496598665867843' 2008-Dec-21 04:07:50 LOG2 antvel: Transforming current Az = 238.98 ZA = 3.02 to apparent RA = 09:53:31.5 Dec = +19:53:19.4 2008-Dec-21 04:07:50 LOG2 antvel: Parameters to Doppler: Heliocentric 29308 2008 356 0.0 2008-Dec-21 04:07:50 INFO5 antvel: Computed antenna velocity: -24.25571 km/s 2008-Dec-21 04:07:50 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-24.2557107013 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Dec-21 04:07:50 INFO4 dopset_gen: New sky frequencies: 1381.355192 1381.355192 1381.355192 1381.355192 1381.355192 1381.355192 1381.355192 1381.355192 1381.355192 2008-Dec-21 04:07:50 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.355192 sky0=1381.355192 sky1=1381.355192 sky2=1381.355192 sky3=1381.355192 sky4=1381.355192 sky5=1381.355192 sky6=1381.355192 sky7=1381.355192 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Dec-21 04:07:50 LOG2 dopset_gen: Result from 'sky2syn': 1631.355192 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Dec-21 04:07:50 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631355192.0} 2008-Dec-21 04:07:50 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-21 04:07:50 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Dec-21 04:07:50 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Dec-21 04:07:50 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:26.1 Dec = +19:55:52.3 2008-Dec-21 04:07:50 LOG3 track_source: Calling 'track_source AGES3193_p2_159 095226.1 195552.3 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Dec-21 04:07:50 START begin_task: Starting task 'sending tracking commands' 2008-Dec-21 04:07:50 LOG5 begin_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2008-Dec-21 04:07:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_159} INFO {Slewing to source 'AGES3193_p2_159' ...} 2008-Dec-21 04:07:50 INFO1 track_source: Starting to track AGES3193_p2_159 2008-Dec-21 04:07:50 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_159" 2008-Dec-21 04:07:50 LOG3 vw_send: To DATATAKING: set ra 095226.1 2008-Dec-21 04:07:50 LOG3 vw_send: To DATATAKING: set dec 195552.3 2008-Dec-21 04:07:50 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Dec-21 04:07:50 LOG3 vw_send: To DATATAKING: pnt tr 095226.1 195552.3 -CJ 2008-Dec-21 04:07:50 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Dec-21 04:07:50 STOP finish_task: Finishing task 'sending tracking commands' 2008-Dec-21 04:07:50 LOG5 finish_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2008-Dec-21 04:07:50 INFO2 finish_task: DONE finished sending: tracking commands 2008-Dec-21 04:07:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-21 04:07:50 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Dec-21 04:07:50 LOG5 end_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2008-Dec-21 04:07:50 START begin_task: Starting task 'waiting on telescope' 2008-Dec-21 04:07:50 LOG5 begin_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2008-Dec-21 04:07:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Dec-21 04:07:50 LOG3 waittrk: Start waittrk 5 2008-Dec-21 04:07:50 START begin_task: Starting task 'waiting on telescope movement' 2008-Dec-21 04:07:50 LOG5 begin_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2008-Dec-21 04:07:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631355192.0} 2008-Dec-21 04:07:51 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-21 04:07:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 04:07:51 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_159" 2008-Dec-21 04:07:51 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Dec-21 04:07:51 LOG4 got_cormsg: From DATATAKING: set ra 095226.1 2008-Dec-21 04:07:51 LOG4 got_cormsg: From DATATAKING: set dec 195552.3 2008-Dec-21 04:07:51 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Dec-21 04:07:51 LOG4 got_cormsg: From DATATAKING: pnt tr 095226.1 195552.3 -CJ 2008-Dec-21 04:07:51 LOG4 got_cormsg: From DATATAKING: 095226.1 2008-Dec-21 04:07:51 LOG4 got_cormsg: From DATATAKING: vw% 195552.3 2008-Dec-21 04:07:51 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2008-Dec-21 04:07:51 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Dec-21 04:07:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 04:07:56 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Dec-21 04:07:56 LOG5 end_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2008-Dec-21 04:07:56 START begin_task: Starting task 'waiting on telescope on source' 2008-Dec-21 04:07:56 LOG5 begin_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2008-Dec-21 04:07:59 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Dec-21 04:07:59 LOG5 end_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2008-Dec-21 04:07:59 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Dec-21 04:07:59 INFO2 waittrk: Now tracking AGES3193_p2_159 2008-Dec-21 04:07:59 LOG4 waittrk: Current telescope position: Az = 237.91 ZA = 3.00 2008-Dec-21 04:07:59 STOP finish_task: Finishing task 'waiting on telescope' 2008-Dec-21 04:07:59 LOG5 finish_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2008-Dec-21 04:07:59 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Dec-21 04:07:59 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-21 04:07:59 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Dec-21 04:07:59 LOG5 end_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2008-Dec-21 04:07:59 START begin_task: Starting task 'adjusting WAPP power' 2008-Dec-21 04:07:59 LOG5 begin_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2008-Dec-21 04:07:59 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Dec-21 04:07:59 INFO2 adjust_power: Starting to adjust WAPP power 2008-Dec-21 04:07:59 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Dec-21 04:07:59 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Dec-21 04:07:59 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Dec-21 04:07:59 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Dec-21 04:07:59 LOG5 begin_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2008-Dec-21 04:07:59 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Dec-21 04:07:59 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Dec-21 04:08:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 04:08:02 LOG4 got_cormsg: From DATATAKING: DONE 2008-Dec-21 04:08:02 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Dec-21 04:08:02 LOG5 end_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2008-Dec-21 04:08:02 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Dec-21 04:08:02 START begin_task: Starting task 'adjusting WAPP power' 2008-Dec-21 04:08:02 LOG5 begin_task: Level: (4) ID = <10066> Status = 0 0 0 0 ok 2008-Dec-21 04:08:02 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Dec-21 04:08:02 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Dec-21 04:08:02 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Dec-21 04:08:02 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Dec-21 04:08:02 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Dec-21 04:08:02 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Dec-21 04:08:02 LOG5 begin_task: Level: (5) ID = <10067> Status = 0 0 0 0 ok 2008-Dec-21 04:08:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 04:08:02 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Dec-21 04:08:02 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 6 0 dB 2008-Dec-21 04:08:02 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2008-Dec-21 04:08:02 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 1 dB --- beam 5: 5 5 dB 2008-Dec-21 04:08:02 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 2 3 dB 2008-Dec-21 04:08:02 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Dec-21 04:08:02 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Dec-21 04:08:02 LOG5 end_task: Level: (5) ID = <10067> Status = 0 0 0 0 ok 2008-Dec-21 04:08:02 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.921 0.901 ALFA beam 1: 1.099 0.110 2008-Dec-21 04:08:03 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.996 0.926 ALFA beam 3: 1.117 1.101 2008-Dec-21 04:08:03 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.073 0.899 ALFA beam 5: 1.076 0.899 2008-Dec-21 04:08:03 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.944 1.069 ALFA beam 7: 1.042 0.944 2008-Dec-21 04:08:03 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Dec-21 04:08:03 LOG5 finish_task: Level: (4) ID = <10066> Status = 0 0 0 0 ok 2008-Dec-21 04:08:03 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Dec-21 04:08:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-21 04:08:03 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Dec-21 04:08:03 LOG5 end_task: Level: (4) ID = <10066> Status = 0 0 0 0 ok 2008-Dec-21 04:08:03 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Dec-21 04:08:03 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Dec-21 04:08:03 LOG5 finish_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2008-Dec-21 04:08:03 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Dec-21 04:08:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-21 04:08:03 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Dec-21 04:08:03 LOG5 end_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2008-Dec-21 04:08:03 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 SS 2008-Dec-21 04:08:03 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 SS 2008-Dec-21 04:08:03 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 SS 2008-Dec-21 04:08:03 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 SS 2008-Dec-21 04:08:03 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Dec-21 04:08:03 START begin_task: Starting task 'WAPP calibration' 2008-Dec-21 04:08:03 LOG5 begin_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2008-Dec-21 04:08:03 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Dec-21 04:08:03 START begin_task: Starting task 'selecting calibration type' 2008-Dec-21 04:08:03 LOG5 begin_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2008-Dec-21 04:08:03 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Dec-21 04:08:03 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Dec-21 04:08:03 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Dec-21 04:08:03 START begin_task: Starting task 'waiting on setcal' 2008-Dec-21 04:08:03 LOG5 begin_task: Level: (5) ID = <10070> Status = 0 0 0 0 ok 2008-Dec-21 04:08:03 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 SS' 2008-Dec-21 04:08:03 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Dec-21 04:08:03 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Dec-21 04:08:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 04:08:03 LOG4 got_cormsg: From DATATAKING: DONE 2008-Dec-21 04:08:03 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Dec-21 04:08:03 LOG5 end_task: Level: (5) ID = <10070> Status = 0 0 0 0 ok 2008-Dec-21 04:08:03 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Dec-21 04:08:03 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Dec-21 04:08:03 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Dec-21 04:08:03 START begin_task: Starting task 'waiting on command to ALFA' 2008-Dec-21 04:08:03 LOG5 begin_task: Level: (5) ID = <10071> Status = 0 0 0 0 ok 2008-Dec-21 04:08:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 04:08:03 LOG4 got_alfamon: From ALFAMON: ACK 2008-Dec-21 04:08:03 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Dec-21 04:08:03 LOG5 end_task: Level: (5) ID = <10071> Status = 0 0 0 0 ok 2008-Dec-21 04:08:03 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Dec-21 04:08:03 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Dec-21 04:08:03 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Dec-21 04:08:03 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Dec-21 04:08:03 START begin_task: Starting task 'waiting on command to ALFA' 2008-Dec-21 04:08:03 LOG5 begin_task: Level: (5) ID = <10072> Status = 0 0 0 0 ok 2008-Dec-21 04:08:03 NOTE WAPPDATA-new_file: New FITS file: wapp.20081221.a2048.0001.fits 2008-Dec-21 04:08:03 LOG4 got_alfamon: From ALFAMON: ACK 2008-Dec-21 04:08:03 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Dec-21 04:08:03 LOG5 end_task: Level: (5) ID = <10072> Status = 0 0 0 0 ok 2008-Dec-21 04:08:03 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Dec-21 04:08:03 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Dec-21 04:08:03 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Dec-21 04:08:03 LOG5 end_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2008-Dec-21 04:08:03 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Dec-21 04:08:03 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Dec-21 04:08:03 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Dec-21 04:08:03 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Dec-21 04:08:03 LOG5 begin_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2008-Dec-21 04:08:04 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081221.a2048.0001.fits} 2008-Dec-21 04:08:04 LOG3 CALCONTROL-caltrig: Software trigger 2008-Dec-21 04:08:04 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Dec-21 04:08:04 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Dec-21 04:08:04 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Dec-21 04:08:04 LOG5 end_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2008-Dec-21 04:08:04 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Dec-21 04:08:04 LOG4 take_data: Calling 'take_data 5 5 CAL ON -' 2008-Dec-21 04:08:04 START begin_task: Starting task 'WAPP spectral observation' 2008-Dec-21 04:08:04 LOG5 begin_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2008-Dec-21 04:08:04 LOG5 log_alfabeam: Parameters: 9.873916666666668 19.931194444444444 9.701703 2008.97514649403 -36.800011 2008-Dec-21 04:08:04 LOG4 log_alfabeam: ALFABEAM 0 9.873916666666648 19.931194444444440 2008-Dec-21 04:08:04 LOG4 log_alfabeam: ALFABEAM 1 9.874263358924360 19.837918364053188 2008-Dec-21 04:08:04 LOG4 log_alfabeam: ALFABEAM 2 9.880455591833263 19.898792602090314 2008-Dec-21 04:08:04 LOG4 log_alfabeam: ALFABEAM 3 9.879983022853301 19.994636122446291 2008-Dec-21 04:08:04 LOG4 log_alfabeam: ALFABEAM 4 9.873339869738965 20.025305372154836 2008-Dec-21 04:08:04 LOG4 log_alfabeam: ALFABEAM 5 9.867378513344807 19.959933411958257 2008-Dec-21 04:08:04 LOG4 log_alfabeam: ALFABEAM 6 9.867825105666293 19.868347586165768 2008-Dec-21 04:08:04 INFO2 take_data: Starting WAPP scan: 835600091 2008-Dec-21 04:08:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Dec-21 04:08:04 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Dec-21 04:08:04 LOG5 begin_task: Level: (5) ID = <10075> Status = 0 0 0 0 ok 2008-Dec-21 04:08:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Dec-21 04:08:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2008-Dec-21 04:08:04 LOG4 check_wapp_levels: WAPP-1 power levels: 0.921 0.901 1.099 0.110 2008-Dec-21 04:08:04 LOG4 check_wapp_levels: WAPP-2 power levels: 0.996 0.926 1.117 1.101 2008-Dec-21 04:08:04 LOG4 check_wapp_levels: WAPP-3 power levels: 1.073 0.899 1.076 0.899 2008-Dec-21 04:08:04 LOG4 check_wapp_levels: WAPP-4 power levels: 0.944 1.069 1.042 0.944 2008-Dec-21 04:08:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 29285.00 2008-Dec-21 04:08:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.355192 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Dec-21 04:08:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.355192 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-21 04:08:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.355192 MHz Flip = 1 Band = 0 Mixer = 1009.160893 MHz 2008-Dec-21 04:08:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.355192 MHz Flip = 1 Band = 0 Mixer = 1056.430758 MHz 2008-Dec-21 04:08:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.355192 MHz Flip = 1 Band = 0 Mixer = 963.569070 MHz 2008-Dec-21 04:08:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.355192 MHz Flip = 1 Band = 0 Mixer = 1170.000000 MHz 2008-Dec-21 04:08:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.355192 MHz Flip = 1 Band = 0 Mixer = 970.000000 MHz 2008-Dec-21 04:08:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.355192 MHz Flip = 1 Band = 0 Mixer = 1066.000000 MHz 2008-Dec-21 04:08:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.355192 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2008-Dec-21 04:08:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Dec-21 04:08:10 INFO5 check_wapp_levels: WAPP power levels are between 0.115 and 1.555 (still bad) 2008-Dec-21 04:08:10 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Dec-21 04:08:10 LOG5 end_task: Level: (5) ID = <10075> Status = 0 0 0 0 ok 2008-Dec-21 04:08:10 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Dec-21 04:08:10 LOG5 end_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2008-Dec-21 04:08:10 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Dec-21 04:08:10 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Dec-21 04:08:10 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Dec-21 04:08:10 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Dec-21 04:08:10 LOG5 begin_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2008-Dec-21 04:08:10 LOG3 CALCONTROL-caltrig: Software trigger 2008-Dec-21 04:08:10 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Dec-21 04:08:10 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Dec-21 04:08:10 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Dec-21 04:08:10 LOG5 end_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2008-Dec-21 04:08:10 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Dec-21 04:08:10 LOG4 take_data: Calling 'take_data 5 5 CAL OFF -' 2008-Dec-21 04:08:10 START begin_task: Starting task 'WAPP spectral observation' 2008-Dec-21 04:08:10 LOG5 begin_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2008-Dec-21 04:08:10 LOG5 log_alfabeam: Parameters: 9.873916666666668 19.931194444444444 9.703653 2008.9751467158467 -36.800011 2008-Dec-21 04:08:10 LOG4 log_alfabeam: ALFABEAM 0 9.873916666666641 19.931194444444444 2008-Dec-21 04:08:10 LOG4 log_alfabeam: ALFABEAM 1 9.874294762539829 19.837946948187231 2008-Dec-21 04:08:10 LOG4 log_alfabeam: ALFABEAM 2 9.880466748230996 19.899229263131993 2008-Dec-21 04:08:10 LOG4 log_alfabeam: ALFABEAM 3 9.879960833820316 19.995056120782735 2008-Dec-21 04:08:10 LOG4 log_alfabeam: ALFABEAM 4 9.873306300524046 20.025267472304012 2008-Dec-21 04:08:10 LOG4 log_alfabeam: ALFABEAM 5 9.867368677771633 19.959467950602587 2008-Dec-21 04:08:10 LOG4 log_alfabeam: ALFABEAM 6 9.867846844682141 19.867930962881175 2008-Dec-21 04:08:10 INFO2 take_data: Starting WAPP scan: 835600092 2008-Dec-21 04:08:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Dec-21 04:08:11 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Dec-21 04:08:11 LOG5 begin_task: Level: (5) ID = <10078> Status = 0 0 0 0 ok 2008-Dec-21 04:08:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Dec-21 04:08:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 29292.00 2008-Dec-21 04:08:16 INFO5 check_wapp_levels: WAPP power levels are between 0.115 and 1.555 (still bad) 2008-Dec-21 04:08:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.355192 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Dec-21 04:08:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.355192 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-21 04:08:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.355192 MHz Flip = 1 Band = 0 Mixer = 1009.160893 MHz 2008-Dec-21 04:08:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.355192 MHz Flip = 1 Band = 0 Mixer = 1056.430758 MHz 2008-Dec-21 04:08:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.355192 MHz Flip = 1 Band = 0 Mixer = 963.569070 MHz 2008-Dec-21 04:08:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.355192 MHz Flip = 1 Band = 0 Mixer = 1170.000000 MHz 2008-Dec-21 04:08:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.355192 MHz Flip = 1 Band = 0 Mixer = 970.000000 MHz 2008-Dec-21 04:08:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.355192 MHz Flip = 1 Band = 0 Mixer = 1066.000000 MHz 2008-Dec-21 04:08:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.355192 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2008-Dec-21 04:08:17 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Dec-21 04:08:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Dec-21 04:08:17 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Dec-21 04:08:17 LOG5 end_task: Level: (5) ID = <10078> Status = 0 0 0 0 ok 2008-Dec-21 04:08:17 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Dec-21 04:08:17 LOG5 end_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2008-Dec-21 04:08:17 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Dec-21 04:08:17 STOP finish_task: Finishing task 'WAPP calibration' 2008-Dec-21 04:08:17 LOG5 finish_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2008-Dec-21 04:08:17 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Dec-21 04:08:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-21 04:08:17 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Dec-21 04:08:17 LOG5 end_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2008-Dec-21 04:08:17 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Dec-21 04:08:17 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 238.98 and ZA = 3.02 2008-Dec-21 04:08:17 LOG3 track_source: Calling 'track_source AGES3193_p2_159 238.98 3.0174356671 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Dec-21 04:08:17 START begin_task: Starting task 'sending tracking commands' 2008-Dec-21 04:08:17 LOG5 begin_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2008-Dec-21 04:08:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_159} INFO {Slewing to source 'AGES3193_p2_159' ...} 2008-Dec-21 04:08:17 INFO1 track_source: Starting to track AGES3193_p2_159 2008-Dec-21 04:08:17 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_159" 2008-Dec-21 04:08:17 LOG3 vw_send: To DATATAKING: set ra 238.98 2008-Dec-21 04:08:17 LOG3 vw_send: To DATATAKING: set dec 3.0174356671 2008-Dec-21 04:08:17 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Dec-21 04:08:17 LOG3 vw_send: To DATATAKING: pnt tr 238.98 3.0174356671 -CF 2008-Dec-21 04:08:17 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Dec-21 04:08:17 STOP finish_task: Finishing task 'sending tracking commands' 2008-Dec-21 04:08:17 LOG5 finish_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2008-Dec-21 04:08:17 INFO2 finish_task: DONE finished sending: tracking commands 2008-Dec-21 04:08:18 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-21 04:08:18 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Dec-21 04:08:18 LOG5 end_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2008-Dec-21 04:08:18 LOG1 fixed_driftmap: Parameters: HA = -00:10:59.9 Start = 09:42:31.7 LST = 09:42:20.2 diff = 11.5 secs 2008-Dec-21 04:08:18 INFO2 fixed_driftmap: Waiting 9.5 seconds for RA 9:53:32 2008-Dec-21 04:08:18 INFO2 lstwait: Waiting for 9.5 secs from LST 09:42:20 to LST 09:42:30 ... 2008-Dec-21 04:08:18 LOG4 send_obs_status: To obs_status: <1> TASKTIME 9.503976854662854 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Dec-21 04:08:18 START begin_task: Starting task 'waiting on wait on LST' 2008-Dec-21 04:08:18 LOG5 begin_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2008-Dec-21 04:08:18 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_159" 2008-Dec-21 04:08:18 LOG4 got_cormsg: From DATATAKING: set ra 238.98 2008-Dec-21 04:08:18 LOG4 got_cormsg: From DATATAKING: set dec 3.0174356671 2008-Dec-21 04:08:18 LOG4 got_cormsg: From DATATAKING: vw% 238.98 2008-Dec-21 04:08:18 LOG4 got_cormsg: From DATATAKING: vw% 3.0174356671 2008-Dec-21 04:08:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 04:08:18 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Dec-21 04:08:18 LOG4 got_cormsg: From DATATAKING: pnt tr 238.98 3.0174356671 -CF 2008-Dec-21 04:08:18 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Dec-21 04:08:18 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Dec-21 04:08:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 04:08:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2008-Dec-21 04:08:27 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Dec-21 04:08:27 LOG5 end_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2008-Dec-21 04:08:27 LOG4 lstwait: Finished waiting 0.50 seconds late 2008-Dec-21 04:08:27 INFO3 lstwait: Finished waiting 2008-Dec-21 04:08:27 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Dec-21 04:08:27 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Dec-21 04:08:27 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Dec-21 04:08:27 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Dec-21 04:08:27 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Dec-21 04:08:27 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ -' 2008-Dec-21 04:08:27 START begin_task: Starting task 'WAPP spectral observation' 2008-Dec-21 04:08:27 LOG5 begin_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2008-Dec-21 04:08:27 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Dec-21 04:08:27 INFO2 take_data: Starting WAPP scan: 835600093 2008-Dec-21 04:08:28 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Dec-21 04:08:28 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Dec-21 04:08:28 LOG5 begin_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2008-Dec-21 04:08:28 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Dec-21 04:08:28 INFO1 WAPP=1+2+3+4-start_spectra: start sec 29309.00 2008-Dec-21 04:08:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.355192 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Dec-21 04:08:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.355192 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-21 04:08:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.355192 MHz Flip = 1 Band = 0 Mixer = 1009.160893 MHz 2008-Dec-21 04:08:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.355192 MHz Flip = 1 Band = 0 Mixer = 1056.430758 MHz 2008-Dec-21 04:08:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.355192 MHz Flip = 1 Band = 0 Mixer = 963.569070 MHz 2008-Dec-21 04:08:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.355192 MHz Flip = 1 Band = 0 Mixer = 1170.000000 MHz 2008-Dec-21 04:08:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.355192 MHz Flip = 1 Band = 0 Mixer = 970.000000 MHz 2008-Dec-21 04:08:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.355192 MHz Flip = 1 Band = 0 Mixer = 1066.000000 MHz 2008-Dec-21 04:08:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.355192 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2008-Dec-21 04:08:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2008-Dec-21 04:08:30 WARNING WAPP=1+2+3+4-start_spectra: WARNING observing when not on source 2008-Dec-21 04:08:31 NOTE WAPP=1+2+3+4-start_spectra: Observing now on source 2008-Dec-21 04:08:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2008-Dec-21 04:08:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2008-Dec-21 04:08:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2008-Dec-21 04:08:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2008-Dec-21 04:08:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2008-Dec-21 04:08:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2008-Dec-21 04:08:44 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2008-Dec-21 04:08:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2008-Dec-21 04:08:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2008-Dec-21 04:08:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2008-Dec-21 04:08:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2008-Dec-21 04:08:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2008-Dec-21 04:08:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2008-Dec-21 04:08:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2008-Dec-21 04:09:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:09:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2008-Dec-21 04:09:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2008-Dec-21 04:09:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2008-Dec-21 04:09:06 LOG4 check_wapp_levels: WAPP-1 power levels: 0.920 0.904 1.100 0.110 2008-Dec-21 04:09:06 LOG4 check_wapp_levels: WAPP-2 power levels: 0.999 0.930 1.116 1.095 2008-Dec-21 04:09:06 LOG4 check_wapp_levels: WAPP-3 power levels: 1.077 0.902 1.080 0.898 2008-Dec-21 04:09:06 LOG4 check_wapp_levels: WAPP-4 power levels: 0.950 1.072 1.048 0.945 2008-Dec-21 04:09:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2008-Dec-21 04:09:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2008-Dec-21 04:09:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:09:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2008-Dec-21 04:09:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2008-Dec-21 04:09:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2008-Dec-21 04:09:20 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2008-Dec-21 04:09:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2008-Dec-21 04:09:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2008-Dec-21 04:09:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2008-Dec-21 04:09:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2008-Dec-21 04:09:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2008-Dec-21 04:09:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2008-Dec-21 04:09:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2008-Dec-21 04:09:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2008-Dec-21 04:09:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2008-Dec-21 04:09:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2008-Dec-21 04:09:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2008-Dec-21 04:09:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2008-Dec-21 04:09:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:09:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2008-Dec-21 04:09:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2008-Dec-21 04:09:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2008-Dec-21 04:09:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2008-Dec-21 04:09:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2008-Dec-21 04:09:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:10:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2008-Dec-21 04:10:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2008-Dec-21 04:10:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2008-Dec-21 04:10:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2008-Dec-21 04:10:07 LOG4 check_wapp_levels: WAPP-1 power levels: 0.916 0.900 1.099 0.110 2008-Dec-21 04:10:07 LOG4 check_wapp_levels: WAPP-2 power levels: 0.999 0.929 1.116 1.097 2008-Dec-21 04:10:07 LOG4 check_wapp_levels: WAPP-3 power levels: 1.078 0.903 1.083 0.897 2008-Dec-21 04:10:07 LOG4 check_wapp_levels: WAPP-4 power levels: 0.945 1.070 1.043 0.944 2008-Dec-21 04:10:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2008-Dec-21 04:10:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2008-Dec-21 04:10:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2008-Dec-21 04:10:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:10:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:10:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2008-Dec-21 04:10:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2008-Dec-21 04:10:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:10:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2008-Dec-21 04:10:27 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2008-Dec-21 04:10:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2008-Dec-21 04:10:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2008-Dec-21 04:10:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2008-Dec-21 04:10:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2008-Dec-21 04:10:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2008-Dec-21 04:10:39 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2008-Dec-21 04:10:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2008-Dec-21 04:10:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2008-Dec-21 04:10:45 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2008-Dec-21 04:10:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2008-Dec-21 04:10:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2008-Dec-21 04:10:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2008-Dec-21 04:10:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2008-Dec-21 04:10:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2008-Dec-21 04:10:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2008-Dec-21 04:11:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2008-Dec-21 04:11:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2008-Dec-21 04:11:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2008-Dec-21 04:11:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2008-Dec-21 04:11:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2008-Dec-21 04:11:08 LOG4 check_wapp_levels: WAPP-1 power levels: 0.918 0.900 1.098 0.110 2008-Dec-21 04:11:08 LOG4 check_wapp_levels: WAPP-2 power levels: 0.999 0.928 1.118 1.097 2008-Dec-21 04:11:08 LOG4 check_wapp_levels: WAPP-3 power levels: 1.078 0.902 1.078 0.897 2008-Dec-21 04:11:08 LOG4 check_wapp_levels: WAPP-4 power levels: 0.947 1.075 1.045 0.947 2008-Dec-21 04:11:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2008-Dec-21 04:11:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:11:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:11:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:11:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:11:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2008-Dec-21 04:11:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2008-Dec-21 04:11:24 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.128 (still bad) 2008-Dec-21 04:11:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2008-Dec-21 04:11:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2008-Dec-21 04:11:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2008-Dec-21 04:11:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2008-Dec-21 04:11:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2008-Dec-21 04:11:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2008-Dec-21 04:11:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2008-Dec-21 04:11:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2008-Dec-21 04:11:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2008-Dec-21 04:11:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2008-Dec-21 04:11:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2008-Dec-21 04:11:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2008-Dec-21 04:11:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2008-Dec-21 04:11:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad) 2008-Dec-21 04:11:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2008-Dec-21 04:11:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:11:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2008-Dec-21 04:12:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2008-Dec-21 04:12:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2008-Dec-21 04:12:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2008-Dec-21 04:12:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:12:08 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2008-Dec-21 04:12:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2008-Dec-21 04:12:10 LOG4 check_wapp_levels: WAPP-1 power levels: 0.923 0.906 1.104 0.110 2008-Dec-21 04:12:10 LOG4 check_wapp_levels: WAPP-2 power levels: 1.003 0.932 1.120 1.100 2008-Dec-21 04:12:10 LOG4 check_wapp_levels: WAPP-3 power levels: 1.095 0.914 1.081 0.901 2008-Dec-21 04:12:10 LOG4 check_wapp_levels: WAPP-4 power levels: 0.947 1.075 1.045 0.946 2008-Dec-21 04:12:12 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.127 (still bad) 2008-Dec-21 04:12:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:12:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:12:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad) 2008-Dec-21 04:12:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:12:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2008-Dec-21 04:12:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2008-Dec-21 04:12:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:12:29 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2008-Dec-21 04:12:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad) 2008-Dec-21 04:12:33 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2008-Dec-21 04:12:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:12:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2008-Dec-21 04:12:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2008-Dec-21 04:12:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:12:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2008-Dec-21 04:12:45 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2008-Dec-21 04:12:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2008-Dec-21 04:12:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2008-Dec-21 04:12:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad) 2008-Dec-21 04:12:53 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2008-Dec-21 04:12:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2008-Dec-21 04:12:57 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2008-Dec-21 04:12:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2008-Dec-21 04:13:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2008-Dec-21 04:13:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2008-Dec-21 04:13:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2008-Dec-21 04:13:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2008-Dec-21 04:13:09 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2008-Dec-21 04:13:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2008-Dec-21 04:13:11 LOG4 check_wapp_levels: WAPP-1 power levels: 0.922 0.904 1.097 0.109 2008-Dec-21 04:13:11 LOG4 check_wapp_levels: WAPP-2 power levels: 1.006 0.934 1.120 1.098 2008-Dec-21 04:13:11 LOG4 check_wapp_levels: WAPP-3 power levels: 1.075 0.901 1.079 0.896 2008-Dec-21 04:13:11 LOG4 check_wapp_levels: WAPP-4 power levels: 0.948 1.076 1.046 0.946 2008-Dec-21 04:13:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2008-Dec-21 04:13:15 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.127 (still bad) 2008-Dec-21 04:13:17 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.134 (still bad) 2008-Dec-21 04:13:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.141 (still bad) 2008-Dec-21 04:13:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.148 (still bad) 2008-Dec-21 04:13:23 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.156 (still bad) 2008-Dec-21 04:13:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.160 (still bad) 2008-Dec-21 04:13:27 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.160 (still bad) 2008-Dec-21 04:13:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.157 (still bad) 2008-Dec-21 04:13:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.151 (still bad) 2008-Dec-21 04:13:33 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.146 (still bad) 2008-Dec-21 04:13:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2008-Dec-21 04:13:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2008-Dec-21 04:13:39 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.124 (still bad) 2008-Dec-21 04:13:41 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.122 (still bad) 2008-Dec-21 04:13:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:13:45 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2008-Dec-21 04:13:47 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2008-Dec-21 04:13:49 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2008-Dec-21 04:13:51 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2008-Dec-21 04:13:53 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 04:13:53.298 (seconds: 15233.298)!} 2008-Dec-21 04:13:53 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 04:13:53.298 (seconds: 15233.298)! 2008-Dec-21 04:13:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2008-Dec-21 04:13:54 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 15232.0 to 15233.0! 2008-Dec-21 04:13:55 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (15232.0 - 15234.0)! 2008-Dec-21 04:13:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:13:58 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2008-Dec-21 04:14:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2008-Dec-21 04:14:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2008-Dec-21 04:14:04 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2008-Dec-21 04:14:06 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2008-Dec-21 04:14:08 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2008-Dec-21 04:14:10 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2008-Dec-21 04:14:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2008-Dec-21 04:14:12 LOG4 check_wapp_levels: WAPP-1 power levels: 0.921 0.902 1.093 0.109 2008-Dec-21 04:14:12 LOG4 check_wapp_levels: WAPP-2 power levels: 1.000 0.932 1.119 1.095 2008-Dec-21 04:14:12 LOG4 check_wapp_levels: WAPP-3 power levels: 1.073 0.901 1.101 0.913 2008-Dec-21 04:14:12 LOG4 check_wapp_levels: WAPP-4 power levels: 0.945 1.072 1.044 0.943 2008-Dec-21 04:14:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:14:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2008-Dec-21 04:14:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2008-Dec-21 04:14:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:14:22 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2008-Dec-21 04:14:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2008-Dec-21 04:14:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2008-Dec-21 04:14:28 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2008-Dec-21 04:14:30 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2008-Dec-21 04:14:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2008-Dec-21 04:14:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2008-Dec-21 04:14:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2008-Dec-21 04:14:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2008-Dec-21 04:14:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2008-Dec-21 04:14:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2008-Dec-21 04:14:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2008-Dec-21 04:14:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2008-Dec-21 04:14:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2008-Dec-21 04:14:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2008-Dec-21 04:14:52 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2008-Dec-21 04:14:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:14:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2008-Dec-21 04:14:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2008-Dec-21 04:15:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2008-Dec-21 04:15:02 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2008-Dec-21 04:15:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2008-Dec-21 04:15:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:15:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2008-Dec-21 04:15:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2008-Dec-21 04:15:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2008-Dec-21 04:15:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2008-Dec-21 04:15:14 LOG4 check_wapp_levels: WAPP-1 power levels: 0.922 0.904 1.102 0.109 2008-Dec-21 04:15:14 LOG4 check_wapp_levels: WAPP-2 power levels: 1.000 0.930 1.117 1.097 2008-Dec-21 04:15:14 LOG4 check_wapp_levels: WAPP-3 power levels: 1.066 0.893 1.077 0.893 2008-Dec-21 04:15:14 LOG4 check_wapp_levels: WAPP-4 power levels: 0.945 1.073 1.044 0.945 2008-Dec-21 04:15:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2008-Dec-21 04:15:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:15:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:15:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:15:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2008-Dec-21 04:15:27 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.123 (still bad) 2008-Dec-21 04:15:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad) 2008-Dec-21 04:15:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2008-Dec-21 04:15:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad) 2008-Dec-21 04:15:35 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.123 (still bad) 2008-Dec-21 04:15:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2008-Dec-21 04:15:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2008-Dec-21 04:15:41 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2008-Dec-21 04:15:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:15:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2008-Dec-21 04:15:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2008-Dec-21 04:15:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2008-Dec-21 04:15:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:15:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2008-Dec-21 04:15:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:15:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2008-Dec-21 04:15:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2008-Dec-21 04:16:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:16:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2008-Dec-21 04:16:05 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2008-Dec-21 04:16:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2008-Dec-21 04:16:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2008-Dec-21 04:16:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2008-Dec-21 04:16:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:16:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2008-Dec-21 04:16:15 LOG4 check_wapp_levels: WAPP-1 power levels: 0.923 0.904 1.100 0.110 2008-Dec-21 04:16:15 LOG4 check_wapp_levels: WAPP-2 power levels: 1.001 0.933 1.117 1.095 2008-Dec-21 04:16:15 LOG4 check_wapp_levels: WAPP-3 power levels: 1.072 0.897 1.076 0.894 2008-Dec-21 04:16:15 LOG4 check_wapp_levels: WAPP-4 power levels: 0.944 1.074 1.043 0.945 2008-Dec-21 04:16:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2008-Dec-21 04:16:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2008-Dec-21 04:16:21 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2008-Dec-21 04:16:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2008-Dec-21 04:16:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2008-Dec-21 04:16:27 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2008-Dec-21 04:16:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2008-Dec-21 04:16:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2008-Dec-21 04:16:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2008-Dec-21 04:16:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2008-Dec-21 04:16:37 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad) 2008-Dec-21 04:16:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2008-Dec-21 04:16:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2008-Dec-21 04:16:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2008-Dec-21 04:16:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2008-Dec-21 04:16:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2008-Dec-21 04:16:50 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2008-Dec-21 04:16:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2008-Dec-21 04:16:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2008-Dec-21 04:16:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2008-Dec-21 04:16:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2008-Dec-21 04:17:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2008-Dec-21 04:17:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad) 2008-Dec-21 04:17:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2008-Dec-21 04:17:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2008-Dec-21 04:17:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2008-Dec-21 04:17:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2008-Dec-21 04:17:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2008-Dec-21 04:17:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2008-Dec-21 04:17:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2008-Dec-21 04:17:16 LOG4 check_wapp_levels: WAPP-1 power levels: 0.922 0.905 1.097 0.110 2008-Dec-21 04:17:16 LOG4 check_wapp_levels: WAPP-2 power levels: 1.002 0.936 1.116 1.095 2008-Dec-21 04:17:16 LOG4 check_wapp_levels: WAPP-3 power levels: 1.063 0.892 1.075 0.894 2008-Dec-21 04:17:16 LOG4 check_wapp_levels: WAPP-4 power levels: 0.947 1.076 1.047 0.947 2008-Dec-21 04:17:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2008-Dec-21 04:17:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2008-Dec-21 04:17:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2008-Dec-21 04:17:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2008-Dec-21 04:17:26 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.121 (still bad) 2008-Dec-21 04:17:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2008-Dec-21 04:17:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2008-Dec-21 04:17:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:17:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2008-Dec-21 04:17:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2008-Dec-21 04:17:38 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.123 (still bad) 2008-Dec-21 04:17:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2008-Dec-21 04:17:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2008-Dec-21 04:17:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2008-Dec-21 04:17:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2008-Dec-21 04:17:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2008-Dec-21 04:17:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:17:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2008-Dec-21 04:17:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2008-Dec-21 04:17:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2008-Dec-21 04:17:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2008-Dec-21 04:18:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2008-Dec-21 04:18:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2008-Dec-21 04:18:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2008-Dec-21 04:18:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2008-Dec-21 04:18:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2008-Dec-21 04:18:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.156 (still bad) 2008-Dec-21 04:18:13 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.207 (still bad) 2008-Dec-21 04:18:15 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.259 (still bad) 2008-Dec-21 04:18:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2008-Dec-21 04:18:17 LOG4 check_wapp_levels: WAPP-1 power levels: 0.931 0.911 1.306 0.111 2008-Dec-21 04:18:17 LOG4 check_wapp_levels: WAPP-2 power levels: 1.002 0.930 1.123 1.104 2008-Dec-21 04:18:17 LOG4 check_wapp_levels: WAPP-3 power levels: 1.063 0.892 1.086 0.902 2008-Dec-21 04:18:17 LOG4 check_wapp_levels: WAPP-4 power levels: 0.943 1.073 1.043 0.945 2008-Dec-21 04:18:19 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.343 (still bad) 2008-Dec-21 04:18:21 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.356 (still bad) 2008-Dec-21 04:18:23 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.345 (still bad) 2008-Dec-21 04:18:25 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.315 (still bad) 2008-Dec-21 04:18:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.239 (still bad) 2008-Dec-21 04:18:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.188 (still bad) 2008-Dec-21 04:18:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.148 (still bad) 2008-Dec-21 04:18:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2008-Dec-21 04:18:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.187 (still bad) 2008-Dec-21 04:18:37 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.260 (still bad) 2008-Dec-21 04:18:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.340 (still bad) 2008-Dec-21 04:18:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.415 (still bad) 2008-Dec-21 04:18:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.474 (still bad) 2008-Dec-21 04:18:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.501 (still bad) 2008-Dec-21 04:18:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.495 (still bad) 2008-Dec-21 04:18:49 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.450 (still bad) 2008-Dec-21 04:18:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.381 (still bad) 2008-Dec-21 04:18:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.296 (still bad) 2008-Dec-21 04:18:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.217 (still bad) 2008-Dec-21 04:18:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.153 (still bad) 2008-Dec-21 04:18:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2008-Dec-21 04:19:01 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.123 (still bad) 2008-Dec-21 04:19:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2008-Dec-21 04:19:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2008-Dec-21 04:19:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2008-Dec-21 04:19:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2008-Dec-21 04:19:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2008-Dec-21 04:19:13 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.122 (still bad) 2008-Dec-21 04:19:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2008-Dec-21 04:19:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:19:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2008-Dec-21 04:19:19 LOG4 check_wapp_levels: WAPP-1 power levels: 0.926 0.906 1.101 0.110 2008-Dec-21 04:19:19 LOG4 check_wapp_levels: WAPP-2 power levels: 1.001 0.936 1.119 1.097 2008-Dec-21 04:19:19 LOG4 check_wapp_levels: WAPP-3 power levels: 1.062 0.889 1.080 0.900 2008-Dec-21 04:19:19 LOG4 check_wapp_levels: WAPP-4 power levels: 0.945 1.074 1.044 0.946 2008-Dec-21 04:19:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2008-Dec-21 04:19:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2008-Dec-21 04:19:25 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.124 (still bad) 2008-Dec-21 04:19:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2008-Dec-21 04:19:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2008-Dec-21 04:19:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:19:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2008-Dec-21 04:19:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2008-Dec-21 04:19:38 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.122 (still bad) 2008-Dec-21 04:19:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2008-Dec-21 04:19:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2008-Dec-21 04:19:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2008-Dec-21 04:19:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2008-Dec-21 04:19:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2008-Dec-21 04:19:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2008-Dec-21 04:19:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2008-Dec-21 04:19:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2008-Dec-21 04:19:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2008-Dec-21 04:19:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2008-Dec-21 04:20:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2008-Dec-21 04:20:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2008-Dec-21 04:20:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2008-Dec-21 04:20:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2008-Dec-21 04:20:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2008-Dec-21 04:20:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2008-Dec-21 04:20:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2008-Dec-21 04:20:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2008-Dec-21 04:20:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2008-Dec-21 04:20:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2008-Dec-21 04:20:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2008-Dec-21 04:20:20 LOG4 check_wapp_levels: WAPP-1 power levels: 0.924 0.907 1.098 0.110 2008-Dec-21 04:20:20 LOG4 check_wapp_levels: WAPP-2 power levels: 0.996 0.933 1.115 1.094 2008-Dec-21 04:20:20 LOG4 check_wapp_levels: WAPP-3 power levels: 1.062 0.890 1.083 0.900 2008-Dec-21 04:20:20 LOG4 check_wapp_levels: WAPP-4 power levels: 0.943 1.073 1.044 0.944 2008-Dec-21 04:20:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2008-Dec-21 04:20:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2008-Dec-21 04:20:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2008-Dec-21 04:20:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2008-Dec-21 04:20:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2008-Dec-21 04:20:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2008-Dec-21 04:20:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2008-Dec-21 04:20:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2008-Dec-21 04:20:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2008-Dec-21 04:20:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2008-Dec-21 04:20:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:20:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2008-Dec-21 04:20:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2008-Dec-21 04:20:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2008-Dec-21 04:20:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2008-Dec-21 04:20:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2008-Dec-21 04:20:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2008-Dec-21 04:20:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:20:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2008-Dec-21 04:21:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2008-Dec-21 04:21:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:21:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2008-Dec-21 04:21:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:21:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:21:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2008-Dec-21 04:21:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2008-Dec-21 04:21:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2008-Dec-21 04:21:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:21:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:21:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2008-Dec-21 04:21:21 LOG4 check_wapp_levels: WAPP-1 power levels: 0.924 0.907 1.097 0.110 2008-Dec-21 04:21:21 LOG4 check_wapp_levels: WAPP-2 power levels: 1.000 0.933 1.118 1.096 2008-Dec-21 04:21:21 LOG4 check_wapp_levels: WAPP-3 power levels: 1.062 0.891 1.074 0.897 2008-Dec-21 04:21:21 LOG4 check_wapp_levels: WAPP-4 power levels: 0.942 1.073 1.042 0.945 2008-Dec-21 04:21:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:21:25 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.123 (still bad) 2008-Dec-21 04:21:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:21:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2008-Dec-21 04:21:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2008-Dec-21 04:21:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:21:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2008-Dec-21 04:21:37 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.126 (still bad) 2008-Dec-21 04:21:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:21:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:21:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2008-Dec-21 04:21:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:21:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2008-Dec-21 04:21:49 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.128 (still bad) 2008-Dec-21 04:21:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad) 2008-Dec-21 04:21:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:21:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:21:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2008-Dec-21 04:21:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:22:01 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.125 (still bad) 2008-Dec-21 04:22:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:22:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:22:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:22:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:22:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:22:13 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.125 (still bad) 2008-Dec-21 04:22:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2008-Dec-21 04:22:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2008-Dec-21 04:22:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2008-Dec-21 04:22:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2008-Dec-21 04:22:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2008-Dec-21 04:22:24 LOG4 check_wapp_levels: WAPP-1 power levels: 0.925 0.907 1.103 0.110 2008-Dec-21 04:22:24 LOG4 check_wapp_levels: WAPP-2 power levels: 1.000 0.932 1.118 1.097 2008-Dec-21 04:22:24 LOG4 check_wapp_levels: WAPP-3 power levels: 1.058 0.893 1.082 0.900 2008-Dec-21 04:22:24 LOG4 check_wapp_levels: WAPP-4 power levels: 0.943 1.074 1.044 0.946 2008-Dec-21 04:22:26 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.125 (still bad) 2008-Dec-21 04:22:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2008-Dec-21 04:22:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2008-Dec-21 04:22:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:22:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2008-Dec-21 04:22:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:22:38 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.126 (still bad) 2008-Dec-21 04:22:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:22:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:22:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2008-Dec-21 04:22:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2008-Dec-21 04:22:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:22:50 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.127 (still bad) 2008-Dec-21 04:22:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:22:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2008-Dec-21 04:22:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2008-Dec-21 04:22:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:23:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2008-Dec-21 04:23:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2008-Dec-21 04:23:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:23:06 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2008-Dec-21 04:23:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad) 2008-Dec-21 04:23:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2008-Dec-21 04:23:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:23:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2008-Dec-21 04:23:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:23:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2008-Dec-21 04:23:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:23:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2008-Dec-21 04:23:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad) 2008-Dec-21 04:23:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2008-Dec-21 04:23:26 LOG4 check_wapp_levels: WAPP-1 power levels: 0.928 0.910 1.103 0.110 2008-Dec-21 04:23:26 LOG4 check_wapp_levels: WAPP-2 power levels: 1.002 0.929 1.124 1.101 2008-Dec-21 04:23:26 LOG4 check_wapp_levels: WAPP-3 power levels: 1.063 0.894 1.080 0.899 2008-Dec-21 04:23:26 LOG4 check_wapp_levels: WAPP-4 power levels: 0.945 1.075 1.046 0.947 2008-Dec-21 04:23:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2008-Dec-21 04:23:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad) 2008-Dec-21 04:23:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2008-Dec-21 04:23:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:23:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:23:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2008-Dec-21 04:23:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:23:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2008-Dec-21 04:23:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:23:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:23:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:23:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad) 2008-Dec-21 04:23:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:23:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:23:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2008-Dec-21 04:23:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:24:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:24:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2008-Dec-21 04:24:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2008-Dec-21 04:24:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:24:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:24:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2008-Dec-21 04:24:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:24:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2008-Dec-21 04:24:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2008-Dec-21 04:24:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2008-Dec-21 04:24:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:24:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:24:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:24:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2008-Dec-21 04:24:27 LOG4 check_wapp_levels: WAPP-1 power levels: 0.935 0.916 1.105 0.110 2008-Dec-21 04:24:27 LOG4 check_wapp_levels: WAPP-2 power levels: 1.005 0.934 1.123 1.101 2008-Dec-21 04:24:27 LOG4 check_wapp_levels: WAPP-3 power levels: 1.062 0.896 1.081 0.899 2008-Dec-21 04:24:27 LOG4 check_wapp_levels: WAPP-4 power levels: 0.951 1.079 1.050 0.953 2008-Dec-21 04:24:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:24:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:24:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:24:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2008-Dec-21 04:24:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:24:39 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.123 (still bad) 2008-Dec-21 04:24:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2008-Dec-21 04:24:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:24:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:24:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2008-Dec-21 04:24:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2008-Dec-21 04:24:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:24:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:24:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:24:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:24:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:25:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2008-Dec-21 04:25:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:25:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:25:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:25:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2008-Dec-21 04:25:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2008-Dec-21 04:25:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad) 2008-Dec-21 04:25:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:25:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2008-Dec-21 04:25:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2008-Dec-21 04:25:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2008-Dec-21 04:25:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2008-Dec-21 04:25:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:25:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2008-Dec-21 04:25:28 LOG4 check_wapp_levels: WAPP-1 power levels: 0.927 0.907 1.102 0.110 2008-Dec-21 04:25:28 LOG4 check_wapp_levels: WAPP-2 power levels: 1.001 0.930 1.118 1.097 2008-Dec-21 04:25:28 LOG4 check_wapp_levels: WAPP-3 power levels: 1.061 0.896 1.082 0.898 2008-Dec-21 04:25:28 LOG4 check_wapp_levels: WAPP-4 power levels: 0.945 1.075 1.046 0.948 2008-Dec-21 04:25:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2008-Dec-21 04:25:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2008-Dec-21 04:25:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2008-Dec-21 04:25:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2008-Dec-21 04:25:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:25:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2008-Dec-21 04:25:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:25:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:25:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2008-Dec-21 04:25:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2008-Dec-21 04:25:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2008-Dec-21 04:25:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:25:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2008-Dec-21 04:25:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:25:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:26:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2008-Dec-21 04:26:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2008-Dec-21 04:26:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2008-Dec-21 04:26:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:26:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2008-Dec-21 04:26:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2008-Dec-21 04:26:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:26:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2008-Dec-21 04:26:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad) 2008-Dec-21 04:26:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:26:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:26:22 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2008-Dec-21 04:26:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:26:26 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.126 (still bad) 2008-Dec-21 04:26:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:26:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2008-Dec-21 04:26:30 LOG4 check_wapp_levels: WAPP-1 power levels: 0.925 0.908 1.104 0.110 2008-Dec-21 04:26:30 LOG4 check_wapp_levels: WAPP-2 power levels: 1.003 0.928 1.118 1.099 2008-Dec-21 04:26:30 LOG4 check_wapp_levels: WAPP-3 power levels: 1.062 0.895 1.078 0.897 2008-Dec-21 04:26:30 LOG4 check_wapp_levels: WAPP-4 power levels: 0.943 1.073 1.042 0.946 2008-Dec-21 04:26:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:26:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2008-Dec-21 04:26:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:26:38 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.124 (still bad) 2008-Dec-21 04:26:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:26:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:26:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad) 2008-Dec-21 04:26:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:26:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:26:51 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.128 (still bad) 2008-Dec-21 04:26:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:26:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:26:57 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.123 (still bad) 2008-Dec-21 04:26:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:27:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:27:03 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.126 (still bad) 2008-Dec-21 04:27:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:27:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:27:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad) 2008-Dec-21 04:27:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:27:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2008-Dec-21 04:27:15 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.126 (still bad) 2008-Dec-21 04:27:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:27:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:27:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:27:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2008-Dec-21 04:27:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:27:27 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.126 (still bad) 2008-Dec-21 04:27:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:27:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2008-Dec-21 04:27:31 LOG4 check_wapp_levels: WAPP-1 power levels: 0.923 0.909 1.101 0.110 2008-Dec-21 04:27:31 LOG4 check_wapp_levels: WAPP-2 power levels: 1.002 0.928 1.119 1.099 2008-Dec-21 04:27:31 LOG4 check_wapp_levels: WAPP-3 power levels: 1.064 0.896 1.077 0.899 2008-Dec-21 04:27:31 LOG4 check_wapp_levels: WAPP-4 power levels: 0.943 1.073 1.042 0.946 2008-Dec-21 04:27:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2008-Dec-21 04:27:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:27:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:27:39 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.125 (still bad) 2008-Dec-21 04:27:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:27:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:27:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:27:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:27:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:27:51 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.125 (still bad) 2008-Dec-21 04:27:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:27:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:27:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad) 2008-Dec-21 04:27:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2008-Dec-21 04:28:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2008-Dec-21 04:28:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2008-Dec-21 04:28:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2008-Dec-21 04:28:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad) 2008-Dec-21 04:28:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2008-Dec-21 04:28:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2008-Dec-21 04:28:14 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.128 (still bad) 2008-Dec-21 04:28:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:28:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:28:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2008-Dec-21 04:28:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:28:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:28:26 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.127 (still bad) 2008-Dec-21 04:28:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2008-Dec-21 04:28:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Dec-21 04:28:29 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Dec-21 04:28:29 LOG5 end_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2008-Dec-21 04:28:29 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Dec-21 04:28:29 LOG5 end_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2008-Dec-21 04:28:29 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Dec-21 04:28:29 LOG5 finish_task: Level: (2) ID = <10049> Status = 0 0 0 0 ok 2008-Dec-21 04:28:29 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Dec-21 04:28:29 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Dec-21 04:28:29 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Dec-21 04:28:29 LOG5 end_task: Level: (2) ID = <10049> Status = 0 0 0 0 ok 2008-Dec-21 04:28:29 COMMAND run_command_line: EXECUTING command 19: 'ENDIF' 2008-Dec-21 04:28:29 COMMAND run_command_line: EXECUTING command 22: 'IF LSTSLEW(AGES3193_p2_161) < 100831 THEN' 2008-Dec-21 04:28:29 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p2_161) < 100831 2008-Dec-21 04:28:29 INFO5 is_if_valid: Condition parsed as: 10.121245333333333 < 10.141944444444444 2008-Dec-21 04:28:29 COMMAND run_command_line: EXECUTING command 23: 'FIXEDDRIFT az=113.34 alfaangle=83.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_161 ra=95300.00 dec=195300.00' 2008-Dec-21 04:28:29 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Dec-21 04:28:30 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Dec-21 04:28:30 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 113.34 83.8 hcorcal 5 tracking no first 1 AGES3193_p2_161 95300.00 195300.00 J 8500.0 Heliocentric velocity(optical)' 2008-Dec-21 04:28:30 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Dec-21 04:28:30 LOG5 begin_task: Level: (2) ID = <10083> Status = 0 0 0 0 ok 2008-Dec-21 04:28:30 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES3193_p2_159' 2008-Dec-21 04:28:30 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Dec-21 04:28:30 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p2_161} 2008-Dec-21 04:28:30 INFO3 fixed_driftmap: Sending telescope to Az = 113.34 and ZA = 3.84 2008-Dec-21 04:28:30 LOG3 track_source: Calling 'track_source AGES3193_p2_161 113.34 3.8422486171 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Dec-21 04:28:30 START begin_task: Starting task 'sending tracking commands' 2008-Dec-21 04:28:30 LOG5 begin_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2008-Dec-21 04:28:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_161} INFO {Slewing to source 'AGES3193_p2_161' ...} 2008-Dec-21 04:28:30 INFO1 track_source: Starting to track AGES3193_p2_161 2008-Dec-21 04:28:30 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_161" 2008-Dec-21 04:28:30 LOG3 vw_send: To DATATAKING: set ra 113.34 2008-Dec-21 04:28:30 LOG3 vw_send: To DATATAKING: set dec 3.8422486171 2008-Dec-21 04:28:30 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Dec-21 04:28:30 LOG3 vw_send: To DATATAKING: pnt tr 113.34 3.8422486171 -CF 2008-Dec-21 04:28:30 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Dec-21 04:28:30 STOP finish_task: Finishing task 'sending tracking commands' 2008-Dec-21 04:28:30 LOG5 finish_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2008-Dec-21 04:28:30 INFO2 finish_task: DONE finished sending: tracking commands 2008-Dec-21 04:28:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-21 04:28:30 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Dec-21 04:28:30 LOG5 end_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2008-Dec-21 04:28:30 START begin_task: Starting task 'rotate ALFA to +83.8 degrees' 2008-Dec-21 04:28:30 LOG5 begin_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2008-Dec-21 04:28:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +83.8 degrees ...} 2008-Dec-21 04:28:30 INFO2 rotate_alfa: ALFA commanded to +83.8 degrees 2008-Dec-21 04:28:30 LOG3 sock_errsend: To ALFAMOTOR: POSITION 83.8 REPLY 2008-Dec-21 04:28:30 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Dec-21 04:28:30 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Dec-21 04:28:30 LOG5 begin_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2008-Dec-21 04:28:30 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_161" 2008-Dec-21 04:28:30 LOG4 got_cormsg: From DATATAKING: set ra 113.34 2008-Dec-21 04:28:30 LOG4 got_cormsg: From DATATAKING: set dec 3.8422486171 2008-Dec-21 04:28:30 LOG4 got_cormsg: From DATATAKING: vw% 113.34 2008-Dec-21 04:28:30 LOG4 got_cormsg: From DATATAKING: vw% 3.8422486171 2008-Dec-21 04:28:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 04:28:30 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Dec-21 04:28:30 LOG4 got_cormsg: From DATATAKING: pnt tr 113.34 3.8422486171 -CF 2008-Dec-21 04:28:30 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Dec-21 04:28:30 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Dec-21 04:28:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 04:28:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:29:37 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Dec-21 04:29:37 INFO3 alfa_motor: ALFA rotator in-position +83.80 degrees 2008-Dec-21 04:29:38 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Dec-21 04:29:38 LOG5 end_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2008-Dec-21 04:29:38 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Dec-21 04:29:38 STOP finish_task: Finishing task 'rotate ALFA to +83.8 degrees' 2008-Dec-21 04:29:38 LOG5 finish_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2008-Dec-21 04:29:38 INFO2 finish_task: DONE finished configuration: rotating ALFA to +83.8 degrees 2008-Dec-21 04:29:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-21 04:29:38 STOP end_task: Finishing task 'rotate ALFA to +83.8 degrees' with status 'OK' 2008-Dec-21 04:29:38 LOG5 end_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2008-Dec-21 04:29:38 START begin_task: Starting task 'waiting on telescope' 2008-Dec-21 04:29:38 LOG5 begin_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2008-Dec-21 04:29:38 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Dec-21 04:29:38 LOG3 waittrk: Start waittrk 5 2008-Dec-21 04:29:38 START begin_task: Starting task 'waiting on telescope movement' 2008-Dec-21 04:29:38 LOG5 begin_task: Level: (4) ID = <10088> Status = 0 0 0 0 ok 2008-Dec-21 04:29:43 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Dec-21 04:29:43 LOG5 end_task: Level: (4) ID = <10088> Status = 0 0 0 0 ok 2008-Dec-21 04:29:43 START begin_task: Starting task 'waiting on telescope on source' 2008-Dec-21 04:29:43 LOG5 begin_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2008-Dec-21 04:33:41 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Dec-21 04:33:41 LOG5 end_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2008-Dec-21 04:33:41 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Dec-21 04:33:41 INFO2 waittrk: Now tracking AGES3193_p2_161 2008-Dec-21 04:33:41 LOG4 waittrk: Current telescope position: Az = 113.22 ZA = 3.84 2008-Dec-21 04:33:41 STOP finish_task: Finishing task 'waiting on telescope' 2008-Dec-21 04:33:41 LOG5 finish_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2008-Dec-21 04:33:41 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Dec-21 04:33:41 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-21 04:33:41 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Dec-21 04:33:41 LOG5 end_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2008-Dec-21 04:33:41 START begin_task: Starting task 'selecting calibration type' 2008-Dec-21 04:33:41 LOG5 begin_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2008-Dec-21 04:33:41 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Dec-21 04:33:41 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Dec-21 04:33:41 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Dec-21 04:33:41 START begin_task: Starting task 'waiting on setcal' 2008-Dec-21 04:33:41 LOG5 begin_task: Level: (4) ID = <10091> Status = 0 0 0 0 ok 2008-Dec-21 04:33:41 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Dec-21 04:33:41 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Dec-21 04:33:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 04:33:42 LOG4 got_cormsg: From DATATAKING: DONE 2008-Dec-21 04:33:42 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Dec-21 04:33:42 LOG5 end_task: Level: (4) ID = <10091> Status = 0 0 0 0 ok 2008-Dec-21 04:33:42 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Dec-21 04:33:42 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Dec-21 04:33:42 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Dec-21 04:33:42 START begin_task: Starting task 'waiting on command to ALFA' 2008-Dec-21 04:33:42 LOG5 begin_task: Level: (4) ID = <10092> Status = 0 0 0 0 ok 2008-Dec-21 04:33:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 04:33:42 LOG4 got_alfamon: From ALFAMON: ACK 2008-Dec-21 04:33:42 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Dec-21 04:33:42 LOG5 end_task: Level: (4) ID = <10092> Status = 0 0 0 0 ok 2008-Dec-21 04:33:42 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Dec-21 04:33:42 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Dec-21 04:33:42 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Dec-21 04:33:42 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Dec-21 04:33:42 START begin_task: Starting task 'waiting on command to ALFA' 2008-Dec-21 04:33:42 LOG5 begin_task: Level: (4) ID = <10093> Status = 0 0 0 0 ok 2008-Dec-21 04:33:42 LOG4 got_alfamon: From ALFAMON: ACK 2008-Dec-21 04:33:42 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Dec-21 04:33:42 LOG5 end_task: Level: (4) ID = <10093> Status = 0 0 0 0 ok 2008-Dec-21 04:33:42 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Dec-21 04:33:42 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Dec-21 04:33:42 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Dec-21 04:33:42 LOG5 end_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2008-Dec-21 04:33:42 LOG5 dopset_later: Calling 'dopset_later 42.230907752526086' 2008-Dec-21 04:33:42 INFO3 dopset_later: Setting Doppler correction for 04:34:24 (42.2 seconds from now) 2008-Dec-21 04:33:43 LOG5 antvel: Calling 'antvel 113.340000 3.842249 F 42.230907752526086' 2008-Dec-21 04:33:43 LOG2 antvel: Transforming current Az = 113.34 ZA = 3.84 to apparent RA = 09:53:31.5 Dec = +19:50:19.5 2008-Dec-21 04:33:43 LOG2 antvel: Parameters to Doppler: Heliocentric 30864 2008 356 0.0 2008-Dec-21 04:33:43 INFO5 antvel: Computed antenna velocity: -24.21068 km/s 2008-Dec-21 04:33:43 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-24.2106828123 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Dec-21 04:33:43 INFO4 dopset_gen: New sky frequencies: 1381.354984 1381.354984 1381.354984 1381.354984 1381.354984 1381.354984 1381.354984 1381.354984 1381.354984 2008-Dec-21 04:33:43 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.354984 sky0=1381.354984 sky1=1381.354984 sky2=1381.354984 sky3=1381.354984 sky4=1381.354984 sky5=1381.354984 sky6=1381.354984 sky7=1381.354984 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Dec-21 04:33:43 LOG2 dopset_gen: Result from 'sky2syn': 1631.354984 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Dec-21 04:33:43 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631354984.0} 2008-Dec-21 04:33:43 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-21 04:33:43 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Dec-21 04:33:43 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Dec-21 04:33:43 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:22.4 Dec = +19:52:52.3 2008-Dec-21 04:33:43 LOG3 track_source: Calling 'track_source AGES3193_p2_161 095222.4 195252.3 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Dec-21 04:33:43 START begin_task: Starting task 'sending tracking commands' 2008-Dec-21 04:33:43 LOG5 begin_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2008-Dec-21 04:33:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_161} INFO {Slewing to source 'AGES3193_p2_161' ...} 2008-Dec-21 04:33:43 INFO1 track_source: Starting to track AGES3193_p2_161 2008-Dec-21 04:33:43 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_161" 2008-Dec-21 04:33:43 LOG3 vw_send: To DATATAKING: set ra 095222.4 2008-Dec-21 04:33:43 LOG3 vw_send: To DATATAKING: set dec 195252.3 2008-Dec-21 04:33:43 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Dec-21 04:33:43 LOG3 vw_send: To DATATAKING: pnt tr 095222.4 195252.3 -CJ 2008-Dec-21 04:33:43 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Dec-21 04:33:43 STOP finish_task: Finishing task 'sending tracking commands' 2008-Dec-21 04:33:43 LOG5 finish_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2008-Dec-21 04:33:43 INFO2 finish_task: DONE finished sending: tracking commands 2008-Dec-21 04:33:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-21 04:33:43 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Dec-21 04:33:43 LOG5 end_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2008-Dec-21 04:33:43 START begin_task: Starting task 'waiting on telescope' 2008-Dec-21 04:33:43 LOG5 begin_task: Level: (3) ID = <10095> Status = 0 0 0 0 ok 2008-Dec-21 04:33:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Dec-21 04:33:43 LOG3 waittrk: Start waittrk 5 2008-Dec-21 04:33:43 START begin_task: Starting task 'waiting on telescope movement' 2008-Dec-21 04:33:43 LOG5 begin_task: Level: (4) ID = <10096> Status = 0 0 0 0 ok 2008-Dec-21 04:33:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631354984.0} 2008-Dec-21 04:33:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-21 04:33:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 04:33:43 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_161" 2008-Dec-21 04:33:43 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Dec-21 04:33:43 LOG4 got_cormsg: From DATATAKING: set ra 095222.4 2008-Dec-21 04:33:43 LOG4 got_cormsg: From DATATAKING: set dec 195252.3 2008-Dec-21 04:33:43 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Dec-21 04:33:43 LOG4 got_cormsg: From DATATAKING: pnt tr 095222.4 195252.3 -CJ 2008-Dec-21 04:33:43 LOG4 got_cormsg: From DATATAKING: 095222.4 2008-Dec-21 04:33:43 LOG4 got_cormsg: From DATATAKING: vw% 195252.3 2008-Dec-21 04:33:43 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2008-Dec-21 04:33:43 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Dec-21 04:33:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 04:33:48 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Dec-21 04:33:48 LOG5 end_task: Level: (4) ID = <10096> Status = 0 0 0 0 ok 2008-Dec-21 04:33:48 START begin_task: Starting task 'waiting on telescope on source' 2008-Dec-21 04:33:48 LOG5 begin_task: Level: (4) ID = <10097> Status = 0 0 0 0 ok 2008-Dec-21 04:33:50 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Dec-21 04:33:50 LOG5 end_task: Level: (4) ID = <10097> Status = 0 0 0 0 ok 2008-Dec-21 04:33:50 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Dec-21 04:33:50 INFO2 waittrk: Now tracking AGES3193_p2_161 2008-Dec-21 04:33:50 LOG4 waittrk: Current telescope position: Az = 113.11 ZA = 3.85 2008-Dec-21 04:33:50 STOP finish_task: Finishing task 'waiting on telescope' 2008-Dec-21 04:33:50 LOG5 finish_task: Level: (3) ID = <10095> Status = 0 0 0 0 ok 2008-Dec-21 04:33:50 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Dec-21 04:33:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-21 04:33:50 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Dec-21 04:33:50 LOG5 end_task: Level: (3) ID = <10095> Status = 0 0 0 0 ok 2008-Dec-21 04:33:50 START begin_task: Starting task 'adjusting WAPP power' 2008-Dec-21 04:33:50 LOG5 begin_task: Level: (3) ID = <10098> Status = 0 0 0 0 ok 2008-Dec-21 04:33:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Dec-21 04:33:50 INFO2 adjust_power: Starting to adjust WAPP power 2008-Dec-21 04:33:50 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Dec-21 04:33:50 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Dec-21 04:33:50 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Dec-21 04:33:50 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Dec-21 04:33:50 LOG5 begin_task: Level: (4) ID = <10099> Status = 0 0 0 0 ok 2008-Dec-21 04:33:50 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Dec-21 04:33:50 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Dec-21 04:33:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 04:33:53 LOG4 got_cormsg: From DATATAKING: DONE 2008-Dec-21 04:33:53 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Dec-21 04:33:53 LOG5 end_task: Level: (4) ID = <10099> Status = 0 0 0 0 ok 2008-Dec-21 04:33:53 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Dec-21 04:33:53 START begin_task: Starting task 'adjusting WAPP power' 2008-Dec-21 04:33:53 LOG5 begin_task: Level: (4) ID = <10100> Status = 0 0 0 0 ok 2008-Dec-21 04:33:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Dec-21 04:33:53 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Dec-21 04:33:53 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Dec-21 04:33:53 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Dec-21 04:33:53 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Dec-21 04:33:53 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Dec-21 04:33:53 LOG5 begin_task: Level: (5) ID = <10101> Status = 0 0 0 0 ok 2008-Dec-21 04:33:53 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Dec-21 04:33:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 04:33:54 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 6 0 dB 2008-Dec-21 04:33:54 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2008-Dec-21 04:33:54 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 0 dB --- beam 5: 5 5 dB 2008-Dec-21 04:33:54 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 2 3 dB 2008-Dec-21 04:33:54 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Dec-21 04:33:54 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Dec-21 04:33:54 LOG5 end_task: Level: (5) ID = <10101> Status = 0 0 0 0 ok 2008-Dec-21 04:33:54 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.901 0.912 ALFA beam 1: 1.077 0.109 2008-Dec-21 04:33:54 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.005 0.948 ALFA beam 3: 1.122 1.064 2008-Dec-21 04:33:54 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.083 1.115 ALFA beam 5: 1.064 0.924 2008-Dec-21 04:33:54 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.913 1.093 ALFA beam 7: 1.006 0.964 2008-Dec-21 04:33:54 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Dec-21 04:33:54 LOG5 finish_task: Level: (4) ID = <10100> Status = 0 0 0 0 ok 2008-Dec-21 04:33:54 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Dec-21 04:33:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-21 04:33:54 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Dec-21 04:33:54 LOG5 end_task: Level: (4) ID = <10100> Status = 0 0 0 0 ok 2008-Dec-21 04:33:54 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Dec-21 04:33:54 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Dec-21 04:33:54 LOG5 finish_task: Level: (3) ID = <10098> Status = 0 0 0 0 ok 2008-Dec-21 04:33:54 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Dec-21 04:33:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-21 04:33:54 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Dec-21 04:33:54 LOG5 end_task: Level: (3) ID = <10098> Status = 0 0 0 0 ok 2008-Dec-21 04:33:54 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 SS 2008-Dec-21 04:33:54 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 SS 2008-Dec-21 04:33:54 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 SS 2008-Dec-21 04:33:54 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 SS 2008-Dec-21 04:33:54 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Dec-21 04:33:54 START begin_task: Starting task 'WAPP calibration' 2008-Dec-21 04:33:54 LOG5 begin_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2008-Dec-21 04:33:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Dec-21 04:33:54 START begin_task: Starting task 'selecting calibration type' 2008-Dec-21 04:33:54 LOG5 begin_task: Level: (4) ID = <10103> Status = 0 0 0 0 ok 2008-Dec-21 04:33:54 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Dec-21 04:33:54 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Dec-21 04:33:54 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Dec-21 04:33:54 START begin_task: Starting task 'waiting on setcal' 2008-Dec-21 04:33:54 LOG5 begin_task: Level: (5) ID = <10104> Status = 0 0 0 0 ok 2008-Dec-21 04:33:54 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 SS' 2008-Dec-21 04:33:54 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Dec-21 04:33:54 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Dec-21 04:33:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 04:33:54 LOG4 got_cormsg: From DATATAKING: DONE 2008-Dec-21 04:33:54 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Dec-21 04:33:54 LOG5 end_task: Level: (5) ID = <10104> Status = 0 0 0 0 ok 2008-Dec-21 04:33:55 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Dec-21 04:33:55 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Dec-21 04:33:55 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Dec-21 04:33:55 START begin_task: Starting task 'waiting on command to ALFA' 2008-Dec-21 04:33:55 LOG5 begin_task: Level: (5) ID = <10105> Status = 0 0 0 0 ok 2008-Dec-21 04:33:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 04:33:55 NOTE WAPPDATA-new_file: New FITS file: wapp.20081221.a2048.0002.fits 2008-Dec-21 04:33:55 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081221.a2048.0002.fits} 2008-Dec-21 04:33:55 LOG4 got_alfamon: From ALFAMON: ACK 2008-Dec-21 04:33:55 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Dec-21 04:33:55 LOG5 end_task: Level: (5) ID = <10105> Status = 0 0 0 0 ok 2008-Dec-21 04:33:55 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Dec-21 04:33:55 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Dec-21 04:33:55 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Dec-21 04:33:55 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Dec-21 04:33:55 START begin_task: Starting task 'waiting on command to ALFA' 2008-Dec-21 04:33:55 LOG5 begin_task: Level: (5) ID = <10106> Status = 0 0 0 0 ok 2008-Dec-21 04:33:55 LOG4 got_alfamon: From ALFAMON: ACK 2008-Dec-21 04:33:55 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Dec-21 04:33:55 LOG5 end_task: Level: (5) ID = <10106> Status = 0 0 0 0 ok 2008-Dec-21 04:33:55 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Dec-21 04:33:55 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Dec-21 04:33:55 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Dec-21 04:33:55 LOG5 end_task: Level: (4) ID = <10103> Status = 0 0 0 0 ok 2008-Dec-21 04:33:55 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Dec-21 04:33:55 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Dec-21 04:33:55 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Dec-21 04:33:55 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Dec-21 04:33:55 LOG5 begin_task: Level: (4) ID = <10107> Status = 0 0 0 0 ok 2008-Dec-21 04:33:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2008-Dec-21 04:33:55 LOG4 check_wapp_levels: WAPP-1 power levels: 0.901 0.912 1.077 0.109 2008-Dec-21 04:33:55 LOG4 check_wapp_levels: WAPP-2 power levels: 1.005 0.948 1.122 1.064 2008-Dec-21 04:33:55 LOG4 check_wapp_levels: WAPP-3 power levels: 1.083 1.115 1.064 0.924 2008-Dec-21 04:33:55 LOG4 check_wapp_levels: WAPP-4 power levels: 0.913 1.093 1.006 0.964 2008-Dec-21 04:33:55 LOG3 CALCONTROL-caltrig: Software trigger 2008-Dec-21 04:33:55 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Dec-21 04:33:55 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Dec-21 04:33:55 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Dec-21 04:33:55 LOG5 end_task: Level: (4) ID = <10107> Status = 0 0 0 0 ok 2008-Dec-21 04:33:55 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Dec-21 04:33:55 LOG4 take_data: Calling 'take_data 5 5 CAL ON -' 2008-Dec-21 04:33:55 START begin_task: Starting task 'WAPP spectral observation' 2008-Dec-21 04:33:55 LOG5 begin_task: Level: (4) ID = <10108> Status = 0 0 0 0 ok 2008-Dec-21 04:33:55 LOG5 log_alfabeam: Parameters: 9.8728888888888875 19.881194444444443 10.133994 2008.9751956739422 83.799934 2008-Dec-21 04:33:55 LOG4 log_alfabeam: ALFABEAM 0 9.872888888888903 19.881194444444443 2008-Dec-21 04:33:55 LOG4 log_alfabeam: ALFABEAM 1 9.875163459037424 19.790139287022242 2008-Dec-21 04:33:55 LOG4 log_alfabeam: ALFABEAM 2 9.880119162606567 19.850598044125569 2008-Dec-21 04:33:55 LOG4 log_alfabeam: ALFABEAM 3 9.877963892442631 19.941581726135524 2008-Dec-21 04:33:55 LOG4 log_alfabeam: ALFABEAM 4 9.870767045862808 19.973942619546218 2008-Dec-21 04:33:55 LOG4 log_alfabeam: ALFABEAM 5 9.865643274812415 19.911215470814682 2008-Dec-21 04:33:55 LOG4 log_alfabeam: ALFABEAM 6 9.867887365403279 19.818384976780315 2008-Dec-21 04:33:55 INFO2 take_data: Starting WAPP scan: 835600094 2008-Dec-21 04:33:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Dec-21 04:33:56 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Dec-21 04:33:56 LOG5 begin_task: Level: (5) ID = <10109> Status = 0 0 0 0 ok 2008-Dec-21 04:33:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Dec-21 04:33:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 30837.00 2008-Dec-21 04:34:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.354984 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Dec-21 04:34:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.354984 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-21 04:34:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.354984 MHz Flip = 1 Band = 0 Mixer = 1009.160893 MHz 2008-Dec-21 04:34:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.354984 MHz Flip = 1 Band = 0 Mixer = 1056.430758 MHz 2008-Dec-21 04:34:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.354984 MHz Flip = 1 Band = 0 Mixer = 963.569070 MHz 2008-Dec-21 04:34:02 LOG3 WAPP=2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.354984 MHz Flip = 1 Band = 0 Mixer = 1170.000000 MHz 2008-Dec-21 04:34:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.354984 MHz Flip = 1 Band = 0 Mixer = 970.000000 MHz 2008-Dec-21 04:34:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.354984 MHz Flip = 1 Band = 0 Mixer = 1066.000000 MHz 2008-Dec-21 04:34:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.354984 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2008-Dec-21 04:34:02 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Dec-21 04:34:02 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Dec-21 04:34:02 LOG5 end_task: Level: (5) ID = <10109> Status = 0 0 0 0 ok 2008-Dec-21 04:34:02 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Dec-21 04:34:02 LOG5 end_task: Level: (4) ID = <10108> Status = 0 0 0 0 ok 2008-Dec-21 04:34:02 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Dec-21 04:34:02 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Dec-21 04:34:02 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Dec-21 04:34:02 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Dec-21 04:34:02 LOG5 begin_task: Level: (4) ID = <10110> Status = 0 0 0 0 ok 2008-Dec-21 04:34:02 LOG3 CALCONTROL-caltrig: Software trigger 2008-Dec-21 04:34:02 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Dec-21 04:34:02 LOG3 WAPP=1-save_rfcalc: Channel 5: Sky freq = 1381.354984 MHz Flip = 1 Band = 0 Mixer = 1170.000000 MHz 2008-Dec-21 04:34:02 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Dec-21 04:34:02 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Dec-21 04:34:02 LOG5 end_task: Level: (4) ID = <10110> Status = 0 0 0 0 ok 2008-Dec-21 04:34:02 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Dec-21 04:34:02 LOG4 take_data: Calling 'take_data 5 5 CAL OFF -' 2008-Dec-21 04:34:02 START begin_task: Starting task 'WAPP spectral observation' 2008-Dec-21 04:34:02 LOG5 begin_task: Level: (4) ID = <10111> Status = 0 0 0 0 ok 2008-Dec-21 04:34:02 LOG5 log_alfabeam: Parameters: 9.8728888888888875 19.881194444444443 10.135944 2008.9751958957588 83.799934 2008-Dec-21 04:34:02 LOG4 log_alfabeam: ALFABEAM 0 9.872888888888889 19.881194444444439 2008-Dec-21 04:34:02 LOG4 log_alfabeam: ALFABEAM 1 9.875180982186214 19.790223616535286 2008-Dec-21 04:34:02 LOG4 log_alfabeam: ALFABEAM 2 9.880125243366958 19.850884894391505 2008-Dec-21 04:34:02 LOG4 log_alfabeam: ALFABEAM 3 9.877951687257079 19.941789441743438 2008-Dec-21 04:34:02 LOG4 log_alfabeam: ALFABEAM 4 9.870748149910268 19.973853114104823 2008-Dec-21 04:34:02 LOG4 log_alfabeam: ALFABEAM 5 9.865637400732572 19.910931365997229 2008-Dec-21 04:34:02 LOG4 log_alfabeam: ALFABEAM 6 9.867899587366287 19.818195835745271 2008-Dec-21 04:34:02 INFO2 take_data: Starting WAPP scan: 835600095 2008-Dec-21 04:34:03 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Dec-21 04:34:03 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Dec-21 04:34:03 LOG5 begin_task: Level: (5) ID = <10112> Status = 0 0 0 0 ok 2008-Dec-21 04:34:03 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Dec-21 04:34:03 INFO5 check_wapp_levels: WAPP power levels are between 0.115 and 1.571 (still bad) 2008-Dec-21 04:34:03 INFO1 WAPP=1+2+3+4-start_spectra: start sec 30844.00 2008-Dec-21 04:34:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.354984 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Dec-21 04:34:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.354984 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-21 04:34:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.354984 MHz Flip = 1 Band = 0 Mixer = 1009.160893 MHz 2008-Dec-21 04:34:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.354984 MHz Flip = 1 Band = 0 Mixer = 1056.430758 MHz 2008-Dec-21 04:34:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.354984 MHz Flip = 1 Band = 0 Mixer = 963.569070 MHz 2008-Dec-21 04:34:09 INFO5 check_wapp_levels: WAPP power levels are between 0.115 and 1.557 (still bad) 2008-Dec-21 04:34:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.354984 MHz Flip = 1 Band = 0 Mixer = 1170.000000 MHz 2008-Dec-21 04:34:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.354984 MHz Flip = 1 Band = 0 Mixer = 970.000000 MHz 2008-Dec-21 04:34:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.354984 MHz Flip = 1 Band = 0 Mixer = 1066.000000 MHz 2008-Dec-21 04:34:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.354984 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2008-Dec-21 04:34:09 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Dec-21 04:34:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Dec-21 04:34:09 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Dec-21 04:34:09 LOG5 end_task: Level: (5) ID = <10112> Status = 0 0 0 0 ok 2008-Dec-21 04:34:09 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Dec-21 04:34:09 LOG5 end_task: Level: (4) ID = <10111> Status = 0 0 0 0 ok 2008-Dec-21 04:34:09 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Dec-21 04:34:09 STOP finish_task: Finishing task 'WAPP calibration' 2008-Dec-21 04:34:09 LOG5 finish_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2008-Dec-21 04:34:09 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Dec-21 04:34:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-21 04:34:09 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Dec-21 04:34:09 LOG5 end_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2008-Dec-21 04:34:09 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Dec-21 04:34:09 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 113.34 and ZA = 3.84 2008-Dec-21 04:34:09 LOG3 track_source: Calling 'track_source AGES3193_p2_161 113.34 3.8422486171 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Dec-21 04:34:09 START begin_task: Starting task 'sending tracking commands' 2008-Dec-21 04:34:09 LOG5 begin_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2008-Dec-21 04:34:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_161} INFO {Slewing to source 'AGES3193_p2_161' ...} 2008-Dec-21 04:34:09 INFO1 track_source: Starting to track AGES3193_p2_161 2008-Dec-21 04:34:09 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_161" 2008-Dec-21 04:34:09 LOG3 vw_send: To DATATAKING: set ra 113.34 2008-Dec-21 04:34:09 LOG3 vw_send: To DATATAKING: set dec 3.8422486171 2008-Dec-21 04:34:09 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Dec-21 04:34:09 LOG3 vw_send: To DATATAKING: pnt tr 113.34 3.8422486171 -CF 2008-Dec-21 04:34:09 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Dec-21 04:34:09 STOP finish_task: Finishing task 'sending tracking commands' 2008-Dec-21 04:34:09 LOG5 finish_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2008-Dec-21 04:34:09 INFO2 finish_task: DONE finished sending: tracking commands 2008-Dec-21 04:34:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-21 04:34:10 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Dec-21 04:34:10 LOG5 end_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2008-Dec-21 04:34:10 LOG1 fixed_driftmap: Parameters: HA = +00:15:00.1 Start = 10:08:31.7 LST = 10:08:16.4 diff = 15.3 secs 2008-Dec-21 04:34:10 INFO2 fixed_driftmap: Waiting 13.3 seconds for RA 9:53:32 2008-Dec-21 04:34:10 INFO2 lstwait: Waiting for 13.2 secs from LST 10:08:16 to LST 10:08:30 ... 2008-Dec-21 04:34:10 LOG4 send_obs_status: To obs_status: <1> TASKTIME 13.234695770770157 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Dec-21 04:34:10 START begin_task: Starting task 'waiting on wait on LST' 2008-Dec-21 04:34:10 LOG5 begin_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2008-Dec-21 04:34:10 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_161" 2008-Dec-21 04:34:10 LOG4 got_cormsg: From DATATAKING: set ra 113.34 2008-Dec-21 04:34:10 LOG4 got_cormsg: From DATATAKING: set dec 3.8422486171 2008-Dec-21 04:34:10 LOG4 got_cormsg: From DATATAKING: vw% 113.34 2008-Dec-21 04:34:10 LOG4 got_cormsg: From DATATAKING: vw% 3.8422486171 2008-Dec-21 04:34:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 04:34:10 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Dec-21 04:34:10 LOG4 got_cormsg: From DATATAKING: pnt tr 113.34 3.8422486171 -CF 2008-Dec-21 04:34:10 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Dec-21 04:34:10 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Dec-21 04:34:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 04:34:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:34:23 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Dec-21 04:34:23 LOG5 end_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2008-Dec-21 04:34:23 LOG4 lstwait: Finished waiting 0.77 seconds late 2008-Dec-21 04:34:23 INFO3 lstwait: Finished waiting 2008-Dec-21 04:34:23 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Dec-21 04:34:23 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Dec-21 04:34:23 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Dec-21 04:34:23 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Dec-21 04:34:23 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Dec-21 04:34:23 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ -' 2008-Dec-21 04:34:23 START begin_task: Starting task 'WAPP spectral observation' 2008-Dec-21 04:34:23 LOG5 begin_task: Level: (3) ID = <10115> Status = 0 0 0 0 ok 2008-Dec-21 04:34:23 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Dec-21 04:34:23 INFO2 take_data: Starting WAPP scan: 835600096 2008-Dec-21 04:34:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Dec-21 04:34:23 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Dec-21 04:34:23 LOG5 begin_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2008-Dec-21 04:34:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Dec-21 04:34:24 INFO1 WAPP=1+2+3+4-start_spectra: start sec 30864.00 2008-Dec-21 04:34:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.354984 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Dec-21 04:34:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.354984 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-21 04:34:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.354984 MHz Flip = 1 Band = 0 Mixer = 1009.160893 MHz 2008-Dec-21 04:34:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.354984 MHz Flip = 1 Band = 0 Mixer = 1056.430758 MHz 2008-Dec-21 04:34:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.354984 MHz Flip = 1 Band = 0 Mixer = 963.569070 MHz 2008-Dec-21 04:34:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.354984 MHz Flip = 1 Band = 0 Mixer = 1170.000000 MHz 2008-Dec-21 04:34:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.354984 MHz Flip = 1 Band = 0 Mixer = 970.000000 MHz 2008-Dec-21 04:34:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.354984 MHz Flip = 1 Band = 0 Mixer = 1066.000000 MHz 2008-Dec-21 04:34:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.354984 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2008-Dec-21 04:34:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:34:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2008-Dec-21 04:34:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2008-Dec-21 04:34:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:34:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad) 2008-Dec-21 04:34:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:34:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2008-Dec-21 04:34:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2008-Dec-21 04:34:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2008-Dec-21 04:34:43 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2008-Dec-21 04:34:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2008-Dec-21 04:34:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2008-Dec-21 04:34:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2008-Dec-21 04:34:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2008-Dec-21 04:34:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:34:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:34:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2008-Dec-21 04:34:58 LOG4 check_wapp_levels: WAPP-1 power levels: 0.905 0.915 1.079 0.110 2008-Dec-21 04:34:58 LOG4 check_wapp_levels: WAPP-2 power levels: 1.009 0.950 1.122 1.066 2008-Dec-21 04:34:58 LOG4 check_wapp_levels: WAPP-3 power levels: 1.084 1.121 1.070 0.928 2008-Dec-21 04:34:58 LOG4 check_wapp_levels: WAPP-4 power levels: 0.914 1.097 1.007 0.967 2008-Dec-21 04:35:00 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2008-Dec-21 04:35:02 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.121 (still bad) 2008-Dec-21 04:35:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2008-Dec-21 04:35:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:35:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2008-Dec-21 04:35:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2008-Dec-21 04:35:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2008-Dec-21 04:35:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2008-Dec-21 04:35:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad) 2008-Dec-21 04:35:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:35:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad) 2008-Dec-21 04:35:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2008-Dec-21 04:35:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:35:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad) 2008-Dec-21 04:35:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad) 2008-Dec-21 04:35:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:35:32 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.121 (still bad) 2008-Dec-21 04:35:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:35:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:35:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2008-Dec-21 04:35:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2008-Dec-21 04:35:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:35:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2008-Dec-21 04:35:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2008-Dec-21 04:35:48 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.121 (still bad) 2008-Dec-21 04:35:50 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.122 (still bad) 2008-Dec-21 04:35:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:35:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2008-Dec-21 04:35:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:35:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2008-Dec-21 04:36:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2008-Dec-21 04:36:00 LOG4 check_wapp_levels: WAPP-1 power levels: 0.906 0.913 1.077 0.109 2008-Dec-21 04:36:00 LOG4 check_wapp_levels: WAPP-2 power levels: 1.009 0.955 1.121 1.065 2008-Dec-21 04:36:00 LOG4 check_wapp_levels: WAPP-3 power levels: 1.079 1.116 1.069 0.923 2008-Dec-21 04:36:00 LOG4 check_wapp_levels: WAPP-4 power levels: 0.913 1.096 1.008 0.966 2008-Dec-21 04:36:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2008-Dec-21 04:36:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad) 2008-Dec-21 04:36:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:36:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad) 2008-Dec-21 04:36:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:36:12 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.121 (still bad) 2008-Dec-21 04:36:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2008-Dec-21 04:36:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2008-Dec-21 04:36:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad) 2008-Dec-21 04:36:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2008-Dec-21 04:36:23 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2008-Dec-21 04:36:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2008-Dec-21 04:36:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2008-Dec-21 04:36:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2008-Dec-21 04:36:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 04:36:33 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.122 (still bad) 2008-Dec-21 04:36:35 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2008-Dec-21 04:36:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2008-Dec-21 04:36:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2008-Dec-21 04:36:41 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2008-Dec-21 04:36:43 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2008-Dec-21 04:36:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2008-Dec-21 04:36:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 04:36:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2008-Dec-21 04:36:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2008-Dec-21 04:36:53 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2008-Dec-21 04:36:55 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.121 (still bad) 2008-Dec-21 04:36:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2008-Dec-21 04:36:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2008-Dec-21 04:37:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2008-Dec-21 04:37:01 LOG4 check_wapp_levels: WAPP-1 power levels: 0.904 0.916 1.083 0.109 2008-Dec-21 04:37:01 LOG4 check_wapp_levels: WAPP-2 power levels: 1.010 0.947 1.123 1.066 2008-Dec-21 04:37:01 LOG4 check_wapp_levels: WAPP-3 power levels: 1.079 1.116 1.069 0.923 2008-Dec-21 04:37:01 LOG4 check_wapp_levels: WAPP-4 power levels: 0.917 1.100 1.013 0.968 2008-Dec-21 04:37:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2008-Dec-21 04:37:05 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.122 (still bad) 2008-Dec-21 04:37:07 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2008-Dec-21 04:37:09 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.125 (still bad) 2008-Dec-21 04:37:11 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.121 (still bad) 2008-Dec-21 04:37:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2008-Dec-21 04:37:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2008-Dec-21 04:37:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad) 2008-Dec-21 04:37:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad) 2008-Dec-21 04:37:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2008-Dec-21 04:37:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2008-Dec-21 04:37:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2008-Dec-21 04:37:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2008-Dec-21 04:37:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2008-Dec-21 04:37:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2008-Dec-21 04:37:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2008-Dec-21 04:37:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2008-Dec-21 04:37:37 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.125 (still bad) 2008-Dec-21 04:37:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2008-Dec-21 04:37:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2008-Dec-21 04:37:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2008-Dec-21 04:37:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2008-Dec-21 04:37:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2008-Dec-21 04:37:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2008-Dec-21 04:37:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2008-Dec-21 04:37:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2008-Dec-21 04:37:56 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.122 (still bad) 2008-Dec-21 04:37:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2008-Dec-21 04:38:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad) 2008-Dec-21 04:38:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2008-Dec-21 04:38:02 LOG4 check_wapp_levels: WAPP-1 power levels: 0.904 0.913 1.078 0.110 2008-Dec-21 04:38:02 LOG4 check_wapp_levels: WAPP-2 power levels: 1.017 0.951 1.122 1.067 2008-Dec-21 04:38:02 LOG4 check_wapp_levels: WAPP-3 power levels: 1.083 1.119 1.068 0.923 2008-Dec-21 04:38:02 LOG4 check_wapp_levels: WAPP-4 power levels: 0.917 1.097 1.013 0.966 2008-Dec-21 04:38:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2008-Dec-21 04:38:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2008-Dec-21 04:38:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2008-Dec-21 04:38:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2008-Dec-21 04:38:12 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.125 (still bad) 2008-Dec-21 04:38:14 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.126 (still bad) 2008-Dec-21 04:38:16 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.126 (still bad) 2008-Dec-21 04:38:18 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.123 (still bad) 2008-Dec-21 04:38:20 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.123 (still bad) 2008-Dec-21 04:38:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad) 2008-Dec-21 04:38:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2008-Dec-21 04:38:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2008-Dec-21 04:38:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2008-Dec-21 04:38:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad) 2008-Dec-21 04:38:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad) 2008-Dec-21 04:38:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2008-Dec-21 04:38:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2008-Dec-21 04:38:38 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.125 (still bad) 2008-Dec-21 04:38:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2008-Dec-21 04:38:42 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.124 (still bad) 2008-Dec-21 04:38:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2008-Dec-21 04:38:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2008-Dec-21 04:38:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2008-Dec-21 04:38:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2008-Dec-21 04:38:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2008-Dec-21 04:38:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad) 2008-Dec-21 04:38:56 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.124 (still bad) 2008-Dec-21 04:38:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2008-Dec-21 04:39:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2008-Dec-21 04:39:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2008-Dec-21 04:39:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2008-Dec-21 04:39:04 LOG4 check_wapp_levels: WAPP-1 power levels: 0.906 0.913 1.081 0.110 2008-Dec-21 04:39:04 LOG4 check_wapp_levels: WAPP-2 power levels: 1.016 0.947 1.131 1.073 2008-Dec-21 04:39:04 LOG4 check_wapp_levels: WAPP-3 power levels: 1.082 1.124 1.078 0.933 2008-Dec-21 04:39:04 LOG4 check_wapp_levels: WAPP-4 power levels: 0.917 1.099 1.014 0.968 2008-Dec-21 04:39:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2008-Dec-21 04:39:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2008-Dec-21 04:39:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2008-Dec-21 04:39:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2008-Dec-21 04:39:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2008-Dec-21 04:39:17 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.129 (still bad) 2008-Dec-21 04:39:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2008-Dec-21 04:39:21 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.126 (still bad) 2008-Dec-21 04:39:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2008-Dec-21 04:39:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2008-Dec-21 04:39:27 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.128 (still bad) 2008-Dec-21 04:39:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2008-Dec-21 04:39:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2008-Dec-21 04:39:33 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.126 (still bad) 2008-Dec-21 04:39:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2008-Dec-21 04:39:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2008-Dec-21 04:39:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2008-Dec-21 04:39:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2008-Dec-21 04:39:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2008-Dec-21 04:39:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2008-Dec-21 04:39:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2008-Dec-21 04:39:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.142 (still bad) 2008-Dec-21 04:39:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.153 (still bad) 2008-Dec-21 04:39:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.145 (still bad) 2008-Dec-21 04:39:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.142 (still bad) 2008-Dec-21 04:39:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2008-Dec-21 04:39:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2008-Dec-21 04:40:01 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.127 (still bad) 2008-Dec-21 04:40:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2008-Dec-21 04:40:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2008-Dec-21 04:40:05 LOG4 check_wapp_levels: WAPP-1 power levels: 0.903 0.913 1.077 0.110 2008-Dec-21 04:40:05 LOG4 check_wapp_levels: WAPP-2 power levels: 1.013 0.945 1.124 1.066 2008-Dec-21 04:40:05 LOG4 check_wapp_levels: WAPP-3 power levels: 1.080 1.118 1.074 0.931 2008-Dec-21 04:40:05 LOG4 check_wapp_levels: WAPP-4 power levels: 0.917 1.099 1.014 0.967 2008-Dec-21 04:40:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2008-Dec-21 04:40:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2008-Dec-21 04:40:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2008-Dec-21 04:40:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2008-Dec-21 04:40:15 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.130 (still bad) 2008-Dec-21 04:40:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2008-Dec-21 04:40:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2008-Dec-21 04:40:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2008-Dec-21 04:40:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2008-Dec-21 04:40:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2008-Dec-21 04:40:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2008-Dec-21 04:40:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2008-Dec-21 04:40:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad) 2008-Dec-21 04:40:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2008-Dec-21 04:40:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad) 2008-Dec-21 04:40:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2008-Dec-21 04:40:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2008-Dec-21 04:40:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2008-Dec-21 04:40:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2008-Dec-21 04:40:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2008-Dec-21 04:40:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2008-Dec-21 04:40:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2008-Dec-21 04:40:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2008-Dec-21 04:40:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2008-Dec-21 04:40:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2008-Dec-21 04:40:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2008-Dec-21 04:41:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2008-Dec-21 04:41:02 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.123 (still bad) 2008-Dec-21 04:41:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2008-Dec-21 04:41:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2008-Dec-21 04:41:06 LOG4 check_wapp_levels: WAPP-1 power levels: 0.911 0.919 1.079 0.110 2008-Dec-21 04:41:06 LOG4 check_wapp_levels: WAPP-2 power levels: 1.014 0.945 1.124 1.067 2008-Dec-21 04:41:06 LOG4 check_wapp_levels: WAPP-3 power levels: 1.078 1.112 1.069 0.926 2008-Dec-21 04:41:06 LOG4 check_wapp_levels: WAPP-4 power levels: 0.918 1.098 1.015 0.968 2008-Dec-21 04:41:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2008-Dec-21 04:41:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2008-Dec-21 04:41:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad) 2008-Dec-21 04:41:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2008-Dec-21 04:41:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2008-Dec-21 04:41:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2008-Dec-21 04:41:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2008-Dec-21 04:41:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2008-Dec-21 04:41:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2008-Dec-21 04:41:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2008-Dec-21 04:41:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2008-Dec-21 04:41:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2008-Dec-21 04:41:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2008-Dec-21 04:41:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2008-Dec-21 04:41:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2008-Dec-21 04:41:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2008-Dec-21 04:41:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2008-Dec-21 04:41:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2008-Dec-21 04:41:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2008-Dec-21 04:41:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2008-Dec-21 04:41:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2008-Dec-21 04:41:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2008-Dec-21 04:41:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2008-Dec-21 04:41:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2008-Dec-21 04:41:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2008-Dec-21 04:41:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2008-Dec-21 04:42:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2008-Dec-21 04:42:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2008-Dec-21 04:42:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2008-Dec-21 04:42:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2008-Dec-21 04:42:07 LOG4 check_wapp_levels: WAPP-1 power levels: 0.906 0.916 1.077 0.110 2008-Dec-21 04:42:07 LOG4 check_wapp_levels: WAPP-2 power levels: 1.012 0.949 1.123 1.066 2008-Dec-21 04:42:07 LOG4 check_wapp_levels: WAPP-3 power levels: 1.090 1.125 1.071 0.928 2008-Dec-21 04:42:07 LOG4 check_wapp_levels: WAPP-4 power levels: 0.920 1.102 1.017 0.970 2008-Dec-21 04:42:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2008-Dec-21 04:42:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2008-Dec-21 04:42:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2008-Dec-21 04:42:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2008-Dec-21 04:42:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2008-Dec-21 04:42:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2008-Dec-21 04:42:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2008-Dec-21 04:42:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2008-Dec-21 04:42:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2008-Dec-21 04:42:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2008-Dec-21 04:42:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2008-Dec-21 04:42:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2008-Dec-21 04:42:33 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.123 (still bad) 2008-Dec-21 04:42:35 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.127 (still bad) 2008-Dec-21 04:42:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2008-Dec-21 04:42:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2008-Dec-21 04:42:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2008-Dec-21 04:42:43 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.126 (still bad) 2008-Dec-21 04:42:45 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.123 (still bad) 2008-Dec-21 04:42:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2008-Dec-21 04:42:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad) 2008-Dec-21 04:42:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2008-Dec-21 04:42:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2008-Dec-21 04:42:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2008-Dec-21 04:42:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad) 2008-Dec-21 04:42:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2008-Dec-21 04:43:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2008-Dec-21 04:43:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2008-Dec-21 04:43:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2008-Dec-21 04:43:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2008-Dec-21 04:43:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2008-Dec-21 04:43:09 LOG4 check_wapp_levels: WAPP-1 power levels: 0.909 0.916 1.078 0.110 2008-Dec-21 04:43:09 LOG4 check_wapp_levels: WAPP-2 power levels: 1.013 0.949 1.126 1.068 2008-Dec-21 04:43:09 LOG4 check_wapp_levels: WAPP-3 power levels: 1.083 1.119 1.074 0.930 2008-Dec-21 04:43:09 LOG4 check_wapp_levels: WAPP-4 power levels: 0.919 1.100 1.016 0.969 2008-Dec-21 04:43:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2008-Dec-21 04:43:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2008-Dec-21 04:43:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2008-Dec-21 04:43:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2008-Dec-21 04:43:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2008-Dec-21 04:43:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2008-Dec-21 04:43:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2008-Dec-21 04:43:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2008-Dec-21 04:43:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2008-Dec-21 04:43:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2008-Dec-21 04:43:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2008-Dec-21 04:43:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2008-Dec-21 04:43:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2008-Dec-21 04:43:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2008-Dec-21 04:43:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2008-Dec-21 04:43:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2008-Dec-21 04:43:44 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.132 (still bad) 2008-Dec-21 04:43:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.167 (still bad) 2008-Dec-21 04:43:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.232 (still bad) 2008-Dec-21 04:43:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.299 (still bad) 2008-Dec-21 04:43:51 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 04:43:51.298 (seconds: 17031.298)!} 2008-Dec-21 04:43:51 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 04:43:51.298 (seconds: 17031.298)! 2008-Dec-21 04:43:52 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 17030.0 to 17031.0! 2008-Dec-21 04:43:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.344 (still bad) 2008-Dec-21 04:43:53 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (17030.0 - 17032.0)! 2008-Dec-21 04:43:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.364 (still bad) 2008-Dec-21 04:43:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.355 (still bad) 2008-Dec-21 04:43:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.317 (still bad) 2008-Dec-21 04:44:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.264 (still bad) 2008-Dec-21 04:44:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.200 (still bad) 2008-Dec-21 04:44:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.141 (still bad) 2008-Dec-21 04:44:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2008-Dec-21 04:44:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2008-Dec-21 04:44:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2008-Dec-21 04:44:10 LOG4 check_wapp_levels: WAPP-1 power levels: 0.999 1.008 1.075 0.110 2008-Dec-21 04:44:10 LOG4 check_wapp_levels: WAPP-2 power levels: 1.032 0.961 1.130 1.071 2008-Dec-21 04:44:10 LOG4 check_wapp_levels: WAPP-3 power levels: 1.086 1.123 1.075 0.929 2008-Dec-21 04:44:10 LOG4 check_wapp_levels: WAPP-4 power levels: 0.919 1.100 1.015 0.968 2008-Dec-21 04:44:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2008-Dec-21 04:44:14 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.128 (still bad) 2008-Dec-21 04:44:16 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.179 (still bad) 2008-Dec-21 04:44:18 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.214 (still bad) 2008-Dec-21 04:44:20 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.224 (still bad) 2008-Dec-21 04:44:22 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.209 (still bad) 2008-Dec-21 04:44:24 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.165 (still bad) 2008-Dec-21 04:44:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2008-Dec-21 04:44:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2008-Dec-21 04:44:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2008-Dec-21 04:44:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.145 (still bad) 2008-Dec-21 04:44:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.171 (still bad) 2008-Dec-21 04:44:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.180 (still bad) 2008-Dec-21 04:44:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.179 (still bad) 2008-Dec-21 04:44:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.176 (still bad) 2008-Dec-21 04:44:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.154 (still bad) 2008-Dec-21 04:44:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2008-Dec-21 04:44:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2008-Dec-21 04:44:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2008-Dec-21 04:44:50 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.141 (still bad) 2008-Dec-21 04:44:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.145 (still bad) 2008-Dec-21 04:44:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2008-Dec-21 04:44:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2008-Dec-21 04:44:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2008-Dec-21 04:45:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2008-Dec-21 04:45:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2008-Dec-21 04:45:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2008-Dec-21 04:45:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2008-Dec-21 04:45:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2008-Dec-21 04:45:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2008-Dec-21 04:45:11 LOG4 check_wapp_levels: WAPP-1 power levels: 0.906 0.916 1.083 0.110 2008-Dec-21 04:45:11 LOG4 check_wapp_levels: WAPP-2 power levels: 1.015 0.949 1.124 1.065 2008-Dec-21 04:45:11 LOG4 check_wapp_levels: WAPP-3 power levels: 1.090 1.125 1.104 0.954 2008-Dec-21 04:45:11 LOG4 check_wapp_levels: WAPP-4 power levels: 0.921 1.099 1.016 0.968 2008-Dec-21 04:45:13 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.123 (still bad) 2008-Dec-21 04:45:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2008-Dec-21 04:45:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2008-Dec-21 04:45:19 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.124 (still bad) 2008-Dec-21 04:45:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2008-Dec-21 04:45:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2008-Dec-21 04:45:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2008-Dec-21 04:45:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2008-Dec-21 04:45:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2008-Dec-21 04:45:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2008-Dec-21 04:45:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2008-Dec-21 04:45:35 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.129 (still bad) 2008-Dec-21 04:45:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2008-Dec-21 04:45:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2008-Dec-21 04:45:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2008-Dec-21 04:45:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2008-Dec-21 04:45:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2008-Dec-21 04:45:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2008-Dec-21 04:45:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2008-Dec-21 04:45:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2008-Dec-21 04:45:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2008-Dec-21 04:45:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2008-Dec-21 04:45:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2008-Dec-21 04:45:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2008-Dec-21 04:46:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2008-Dec-21 04:46:03 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.125 (still bad) 2008-Dec-21 04:46:05 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.125 (still bad) 2008-Dec-21 04:46:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2008-Dec-21 04:46:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2008-Dec-21 04:46:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2008-Dec-21 04:46:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2008-Dec-21 04:46:13 LOG4 check_wapp_levels: WAPP-1 power levels: 0.907 0.915 1.076 0.110 2008-Dec-21 04:46:13 LOG4 check_wapp_levels: WAPP-2 power levels: 1.016 0.945 1.124 1.066 2008-Dec-21 04:46:13 LOG4 check_wapp_levels: WAPP-3 power levels: 1.088 1.121 1.074 0.929 2008-Dec-21 04:46:13 LOG4 check_wapp_levels: WAPP-4 power levels: 0.931 1.112 1.027 0.979 2008-Dec-21 04:46:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2008-Dec-21 04:46:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2008-Dec-21 04:46:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2008-Dec-21 04:46:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2008-Dec-21 04:46:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2008-Dec-21 04:46:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2008-Dec-21 04:46:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2008-Dec-21 04:46:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2008-Dec-21 04:46:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2008-Dec-21 04:46:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2008-Dec-21 04:46:36 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.125 (still bad) 2008-Dec-21 04:46:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2008-Dec-21 04:46:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2008-Dec-21 04:46:42 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.124 (still bad) 2008-Dec-21 04:46:44 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.123 (still bad) 2008-Dec-21 04:46:46 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.126 (still bad) 2008-Dec-21 04:46:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2008-Dec-21 04:46:50 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.124 (still bad) 2008-Dec-21 04:46:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2008-Dec-21 04:46:54 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.123 (still bad) 2008-Dec-21 04:46:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2008-Dec-21 04:46:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2008-Dec-21 04:47:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2008-Dec-21 04:47:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2008-Dec-21 04:47:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2008-Dec-21 04:47:06 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.125 (still bad) 2008-Dec-21 04:47:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2008-Dec-21 04:47:10 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.128 (still bad) 2008-Dec-21 04:47:12 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.124 (still bad) 2008-Dec-21 04:47:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2008-Dec-21 04:47:14 LOG4 check_wapp_levels: WAPP-1 power levels: 0.903 0.913 1.078 0.109 2008-Dec-21 04:47:14 LOG4 check_wapp_levels: WAPP-2 power levels: 1.012 0.946 1.125 1.066 2008-Dec-21 04:47:14 LOG4 check_wapp_levels: WAPP-3 power levels: 1.091 1.125 1.073 0.926 2008-Dec-21 04:47:14 LOG4 check_wapp_levels: WAPP-4 power levels: 0.922 1.101 1.015 0.970 2008-Dec-21 04:47:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2008-Dec-21 04:47:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2008-Dec-21 04:47:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2008-Dec-21 04:47:22 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.128 (still bad) 2008-Dec-21 04:47:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2008-Dec-21 04:47:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2008-Dec-21 04:47:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2008-Dec-21 04:47:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2008-Dec-21 04:47:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2008-Dec-21 04:47:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2008-Dec-21 04:47:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2008-Dec-21 04:47:38 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.129 (still bad) 2008-Dec-21 04:47:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2008-Dec-21 04:47:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2008-Dec-21 04:47:45 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.135 (still bad) 2008-Dec-21 04:47:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2008-Dec-21 04:47:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2008-Dec-21 04:47:51 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.138 (still bad) 2008-Dec-21 04:47:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.143 (still bad) 2008-Dec-21 04:47:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2008-Dec-21 04:47:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2008-Dec-21 04:47:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2008-Dec-21 04:48:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2008-Dec-21 04:48:03 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.129 (still bad) 2008-Dec-21 04:48:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2008-Dec-21 04:48:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2008-Dec-21 04:48:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2008-Dec-21 04:48:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2008-Dec-21 04:48:13 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.133 (still bad) 2008-Dec-21 04:48:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2008-Dec-21 04:48:15 LOG4 check_wapp_levels: WAPP-1 power levels: 0.908 0.912 1.079 0.110 2008-Dec-21 04:48:15 LOG4 check_wapp_levels: WAPP-2 power levels: 1.013 0.947 1.126 1.066 2008-Dec-21 04:48:15 LOG4 check_wapp_levels: WAPP-3 power levels: 1.101 1.132 1.072 0.926 2008-Dec-21 04:48:15 LOG4 check_wapp_levels: WAPP-4 power levels: 0.922 1.102 1.015 0.970 2008-Dec-21 04:48:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2008-Dec-21 04:48:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2008-Dec-21 04:48:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2008-Dec-21 04:48:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2008-Dec-21 04:48:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2008-Dec-21 04:48:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2008-Dec-21 04:48:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2008-Dec-21 04:48:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2008-Dec-21 04:48:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2008-Dec-21 04:48:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2008-Dec-21 04:48:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2008-Dec-21 04:48:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2008-Dec-21 04:48:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2008-Dec-21 04:48:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2008-Dec-21 04:48:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2008-Dec-21 04:48:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2008-Dec-21 04:48:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2008-Dec-21 04:48:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2008-Dec-21 04:48:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2008-Dec-21 04:48:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2008-Dec-21 04:48:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2008-Dec-21 04:48:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2008-Dec-21 04:49:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2008-Dec-21 04:49:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2008-Dec-21 04:49:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2008-Dec-21 04:49:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2008-Dec-21 04:49:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2008-Dec-21 04:49:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2008-Dec-21 04:49:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2008-Dec-21 04:49:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2008-Dec-21 04:49:16 LOG4 check_wapp_levels: WAPP-1 power levels: 0.908 0.915 1.077 0.110 2008-Dec-21 04:49:16 LOG4 check_wapp_levels: WAPP-2 power levels: 1.015 0.950 1.127 1.068 2008-Dec-21 04:49:16 LOG4 check_wapp_levels: WAPP-3 power levels: 1.097 1.128 1.074 0.928 2008-Dec-21 04:49:16 LOG4 check_wapp_levels: WAPP-4 power levels: 0.922 1.102 1.015 0.971 2008-Dec-21 04:49:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2008-Dec-21 04:49:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2008-Dec-21 04:49:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2008-Dec-21 04:49:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2008-Dec-21 04:49:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2008-Dec-21 04:49:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2008-Dec-21 04:49:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2008-Dec-21 04:49:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2008-Dec-21 04:49:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2008-Dec-21 04:49:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2008-Dec-21 04:49:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2008-Dec-21 04:49:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2008-Dec-21 04:49:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2008-Dec-21 04:49:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2008-Dec-21 04:49:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2008-Dec-21 04:49:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2008-Dec-21 04:49:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2008-Dec-21 04:49:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2008-Dec-21 04:49:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2008-Dec-21 04:49:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2008-Dec-21 04:49:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2008-Dec-21 04:50:00 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.127 (still bad) 2008-Dec-21 04:50:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2008-Dec-21 04:50:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2008-Dec-21 04:50:06 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.131 (still bad) 2008-Dec-21 04:50:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2008-Dec-21 04:50:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2008-Dec-21 04:50:12 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.130 (still bad) 2008-Dec-21 04:50:14 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.129 (still bad) 2008-Dec-21 04:50:16 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.131 (still bad) 2008-Dec-21 04:50:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2008-Dec-21 04:50:18 LOG4 check_wapp_levels: WAPP-1 power levels: 0.906 0.916 1.077 0.109 2008-Dec-21 04:50:18 LOG4 check_wapp_levels: WAPP-2 power levels: 1.015 0.952 1.130 1.070 2008-Dec-21 04:50:18 LOG4 check_wapp_levels: WAPP-3 power levels: 1.096 1.129 1.076 0.928 2008-Dec-21 04:50:18 LOG4 check_wapp_levels: WAPP-4 power levels: 0.922 1.104 1.016 0.971 2008-Dec-21 04:50:20 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.127 (still bad) 2008-Dec-21 04:50:22 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.128 (still bad) 2008-Dec-21 04:50:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2008-Dec-21 04:50:26 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.129 (still bad) 2008-Dec-21 04:50:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2008-Dec-21 04:50:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2008-Dec-21 04:50:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2008-Dec-21 04:50:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2008-Dec-21 04:50:37 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.130 (still bad) 2008-Dec-21 04:50:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2008-Dec-21 04:50:41 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.132 (still bad) 2008-Dec-21 04:50:43 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.129 (still bad) 2008-Dec-21 04:50:45 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.129 (still bad) 2008-Dec-21 04:50:47 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.130 (still bad) 2008-Dec-21 04:50:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2008-Dec-21 04:50:51 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.127 (still bad) 2008-Dec-21 04:50:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2008-Dec-21 04:50:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2008-Dec-21 04:50:57 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.127 (still bad) 2008-Dec-21 04:50:59 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.130 (still bad) 2008-Dec-21 04:51:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2008-Dec-21 04:51:03 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.126 (still bad) 2008-Dec-21 04:51:05 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.132 (still bad) 2008-Dec-21 04:51:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2008-Dec-21 04:51:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2008-Dec-21 04:51:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2008-Dec-21 04:51:13 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.125 (still bad) 2008-Dec-21 04:51:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2008-Dec-21 04:51:17 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.132 (still bad) 2008-Dec-21 04:51:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2008-Dec-21 04:51:19 LOG4 check_wapp_levels: WAPP-1 power levels: 0.907 0.914 1.082 0.109 2008-Dec-21 04:51:19 LOG4 check_wapp_levels: WAPP-2 power levels: 1.011 0.951 1.126 1.069 2008-Dec-21 04:51:19 LOG4 check_wapp_levels: WAPP-3 power levels: 1.094 1.124 1.075 0.926 2008-Dec-21 04:51:19 LOG4 check_wapp_levels: WAPP-4 power levels: 0.926 1.107 1.019 0.975 2008-Dec-21 04:51:21 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.125 (still bad) 2008-Dec-21 04:51:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2008-Dec-21 04:51:25 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.126 (still bad) 2008-Dec-21 04:51:27 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.126 (still bad) 2008-Dec-21 04:51:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2008-Dec-21 04:51:31 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.125 (still bad) 2008-Dec-21 04:51:33 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.124 (still bad) 2008-Dec-21 04:51:35 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.128 (still bad) 2008-Dec-21 04:51:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2008-Dec-21 04:51:39 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.126 (still bad) 2008-Dec-21 04:51:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2008-Dec-21 04:51:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2008-Dec-21 04:51:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2008-Dec-21 04:51:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2008-Dec-21 04:51:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2008-Dec-21 04:51:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2008-Dec-21 04:51:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2008-Dec-21 04:51:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2008-Dec-21 04:51:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2008-Dec-21 04:52:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2008-Dec-21 04:52:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2008-Dec-21 04:52:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2008-Dec-21 04:52:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2008-Dec-21 04:52:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2008-Dec-21 04:52:10 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.124 (still bad) 2008-Dec-21 04:52:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2008-Dec-21 04:52:14 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.125 (still bad) 2008-Dec-21 04:52:16 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.126 (still bad) 2008-Dec-21 04:52:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2008-Dec-21 04:52:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2008-Dec-21 04:52:20 LOG4 check_wapp_levels: WAPP-1 power levels: 0.907 0.913 1.075 0.109 2008-Dec-21 04:52:20 LOG4 check_wapp_levels: WAPP-2 power levels: 1.009 0.947 1.127 1.071 2008-Dec-21 04:52:20 LOG4 check_wapp_levels: WAPP-3 power levels: 1.089 1.123 1.071 0.924 2008-Dec-21 04:52:20 LOG4 check_wapp_levels: WAPP-4 power levels: 0.922 1.100 1.015 0.968 2008-Dec-21 04:52:22 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.127 (still bad) 2008-Dec-21 04:52:24 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.132 (still bad) 2008-Dec-21 04:52:26 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.128 (still bad) 2008-Dec-21 04:52:28 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.130 (still bad) 2008-Dec-21 04:52:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2008-Dec-21 04:52:32 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.128 (still bad) 2008-Dec-21 04:52:34 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.125 (still bad) 2008-Dec-21 04:52:36 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.127 (still bad) 2008-Dec-21 04:52:38 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.123 (still bad) 2008-Dec-21 04:52:40 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.123 (still bad) 2008-Dec-21 04:52:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2008-Dec-21 04:52:44 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.123 (still bad) 2008-Dec-21 04:52:46 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.121 (still bad) 2008-Dec-21 04:52:48 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.124 (still bad) 2008-Dec-21 04:52:50 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.123 (still bad) 2008-Dec-21 04:52:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2008-Dec-21 04:52:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2008-Dec-21 04:52:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2008-Dec-21 04:52:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2008-Dec-21 04:53:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2008-Dec-21 04:53:02 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.123 (still bad) 2008-Dec-21 04:53:04 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.125 (still bad) 2008-Dec-21 04:53:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2008-Dec-21 04:53:08 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.123 (still bad) 2008-Dec-21 04:53:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2008-Dec-21 04:53:12 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.123 (still bad) 2008-Dec-21 04:53:14 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.122 (still bad) 2008-Dec-21 04:53:16 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.125 (still bad) 2008-Dec-21 04:53:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2008-Dec-21 04:53:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2008-Dec-21 04:53:21 LOG4 check_wapp_levels: WAPP-1 power levels: 0.907 0.913 1.076 0.109 2008-Dec-21 04:53:21 LOG4 check_wapp_levels: WAPP-2 power levels: 1.009 0.947 1.123 1.067 2008-Dec-21 04:53:21 LOG4 check_wapp_levels: WAPP-3 power levels: 1.088 1.118 1.073 0.925 2008-Dec-21 04:53:21 LOG4 check_wapp_levels: WAPP-4 power levels: 0.921 1.101 1.016 0.969 2008-Dec-21 04:53:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2008-Dec-21 04:53:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2008-Dec-21 04:53:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2008-Dec-21 04:53:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2008-Dec-21 04:53:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2008-Dec-21 04:53:33 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.124 (still bad) 2008-Dec-21 04:53:35 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.124 (still bad) 2008-Dec-21 04:53:37 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.124 (still bad) 2008-Dec-21 04:53:39 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.125 (still bad) 2008-Dec-21 04:53:41 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.127 (still bad) 2008-Dec-21 04:53:43 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.126 (still bad) 2008-Dec-21 04:53:45 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.124 (still bad) 2008-Dec-21 04:53:47 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.124 (still bad) 2008-Dec-21 04:53:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2008-Dec-21 04:53:51 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.125 (still bad) 2008-Dec-21 04:53:53 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.128 (still bad) 2008-Dec-21 04:53:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2008-Dec-21 04:53:57 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.124 (still bad) 2008-Dec-21 04:53:59 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.125 (still bad) 2008-Dec-21 04:54:01 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.125 (still bad) 2008-Dec-21 04:54:03 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.124 (still bad) 2008-Dec-21 04:54:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2008-Dec-21 04:54:07 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.126 (still bad) 2008-Dec-21 04:54:09 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.124 (still bad) 2008-Dec-21 04:54:11 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.125 (still bad) 2008-Dec-21 04:54:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2008-Dec-21 04:54:15 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.125 (still bad) 2008-Dec-21 04:54:17 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.126 (still bad) 2008-Dec-21 04:54:19 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.127 (still bad) 2008-Dec-21 04:54:21 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.124 (still bad) 2008-Dec-21 04:54:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2008-Dec-21 04:54:23 LOG4 check_wapp_levels: WAPP-1 power levels: 0.908 0.914 1.077 0.109 2008-Dec-21 04:54:23 LOG4 check_wapp_levels: WAPP-2 power levels: 1.012 0.950 1.124 1.065 2008-Dec-21 04:54:23 LOG4 check_wapp_levels: WAPP-3 power levels: 1.089 1.122 1.073 0.926 2008-Dec-21 04:54:23 LOG4 check_wapp_levels: WAPP-4 power levels: 0.921 1.101 1.017 0.971 2008-Dec-21 04:54:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Dec-21 04:54:24 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Dec-21 04:54:24 LOG5 end_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2008-Dec-21 04:54:24 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Dec-21 04:54:24 LOG5 end_task: Level: (3) ID = <10115> Status = 0 0 0 0 ok 2008-Dec-21 04:54:24 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Dec-21 04:54:24 LOG5 finish_task: Level: (2) ID = <10083> Status = 0 0 0 0 ok 2008-Dec-21 04:54:24 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Dec-21 04:54:24 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Dec-21 04:54:24 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Dec-21 04:54:24 LOG5 end_task: Level: (2) ID = <10083> Status = 0 0 0 0 ok 2008-Dec-21 04:54:24 COMMAND run_command_line: EXECUTING command 26: 'ENDIF' 2008-Dec-21 04:54:24 COMMAND run_command_line: EXECUTING command 29: 'IF LSTSLEW(AGES3193_p2_002) < 103131 THEN' 2008-Dec-21 04:54:24 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p2_002) < 103131 2008-Dec-21 04:54:24 INFO5 is_if_valid: Condition parsed as: 10.517705666666666 < 10.525277777777779 2008-Dec-21 04:54:24 COMMAND run_command_line: EXECUTING command 30: 'FIXEDDRIFT az=123.28 alfaangle=75.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_002 ra=95300.00 dec=235130.00' 2008-Dec-21 04:54:24 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Dec-21 04:54:25 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Dec-21 04:54:25 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 123.28 75.3 hcorcal 5 tracking no first 1 AGES3193_p2_002 95300.00 235130.00 J 8500.0 Heliocentric velocity(optical)' 2008-Dec-21 04:54:25 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Dec-21 04:54:25 LOG5 begin_task: Level: (2) ID = <10117> Status = 0 0 0 0 ok 2008-Dec-21 04:54:25 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES3193_p2_161' 2008-Dec-21 04:54:25 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Dec-21 04:54:25 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p2_002} 2008-Dec-21 04:54:25 INFO3 fixed_driftmap: Sending telescope to Az = 123.28 and ZA = 10.40 2008-Dec-21 04:54:25 LOG3 track_source: Calling 'track_source AGES3193_p2_002 123.28 10.4039451245 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Dec-21 04:54:25 START begin_task: Starting task 'sending tracking commands' 2008-Dec-21 04:54:25 LOG5 begin_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2008-Dec-21 04:54:25 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_002} INFO {Slewing to source 'AGES3193_p2_002' ...} 2008-Dec-21 04:54:25 INFO1 track_source: Starting to track AGES3193_p2_002 2008-Dec-21 04:54:25 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_002" 2008-Dec-21 04:54:25 LOG3 vw_send: To DATATAKING: set ra 123.28 2008-Dec-21 04:54:25 LOG3 vw_send: To DATATAKING: set dec 10.4039451245 2008-Dec-21 04:54:25 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Dec-21 04:54:25 LOG3 vw_send: To DATATAKING: pnt tr 123.28 10.4039451245 -CF 2008-Dec-21 04:54:25 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Dec-21 04:54:25 STOP finish_task: Finishing task 'sending tracking commands' 2008-Dec-21 04:54:25 LOG5 finish_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2008-Dec-21 04:54:25 INFO2 finish_task: DONE finished sending: tracking commands 2008-Dec-21 04:54:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-21 04:54:25 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Dec-21 04:54:25 LOG5 end_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2008-Dec-21 04:54:25 START begin_task: Starting task 'rotate ALFA to +75.3 degrees' 2008-Dec-21 04:54:25 LOG5 begin_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2008-Dec-21 04:54:25 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +75.3 degrees ...} 2008-Dec-21 04:54:25 INFO2 rotate_alfa: ALFA commanded to +75.3 degrees 2008-Dec-21 04:54:25 LOG3 sock_errsend: To ALFAMOTOR: POSITION 75.3 REPLY 2008-Dec-21 04:54:25 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Dec-21 04:54:25 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Dec-21 04:54:25 LOG5 begin_task: Level: (4) ID = <10120> Status = 0 0 0 0 ok 2008-Dec-21 04:54:25 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_002" 2008-Dec-21 04:54:25 LOG4 got_cormsg: From DATATAKING: set ra 123.28 2008-Dec-21 04:54:25 LOG4 got_cormsg: From DATATAKING: set dec 10.4039451245 2008-Dec-21 04:54:25 LOG4 got_cormsg: From DATATAKING: vw% 123.28 2008-Dec-21 04:54:25 LOG4 got_cormsg: From DATATAKING: vw% 10.4039451245 2008-Dec-21 04:54:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 04:54:25 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Dec-21 04:54:25 LOG4 got_cormsg: From DATATAKING: pnt tr 123.28 10.4039451245 -CF 2008-Dec-21 04:54:25 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Dec-21 04:54:25 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Dec-21 04:54:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 04:54:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2008-Dec-21 04:54:31 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Dec-21 04:54:31 INFO3 alfa_motor: ALFA rotator in-position +75.30 degrees 2008-Dec-21 04:54:31 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Dec-21 04:54:31 LOG5 end_task: Level: (4) ID = <10120> Status = 0 0 0 0 ok 2008-Dec-21 04:54:31 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Dec-21 04:54:31 STOP finish_task: Finishing task 'rotate ALFA to +75.3 degrees' 2008-Dec-21 04:54:31 LOG5 finish_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2008-Dec-21 04:54:31 INFO2 finish_task: DONE finished configuration: rotating ALFA to +75.3 degrees 2008-Dec-21 04:54:31 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-21 04:54:31 STOP end_task: Finishing task 'rotate ALFA to +75.3 degrees' with status 'OK' 2008-Dec-21 04:54:31 LOG5 end_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2008-Dec-21 04:54:31 START begin_task: Starting task 'waiting on telescope' 2008-Dec-21 04:54:31 LOG5 begin_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2008-Dec-21 04:54:31 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Dec-21 04:54:31 LOG3 waittrk: Start waittrk 5 2008-Dec-21 04:54:31 START begin_task: Starting task 'waiting on telescope movement' 2008-Dec-21 04:54:31 LOG5 begin_task: Level: (4) ID = <10122> Status = 0 0 0 0 ok 2008-Dec-21 04:54:36 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Dec-21 04:54:36 LOG5 end_task: Level: (4) ID = <10122> Status = 0 0 0 0 ok 2008-Dec-21 04:54:36 START begin_task: Starting task 'waiting on telescope on source' 2008-Dec-21 04:54:36 LOG5 begin_task: Level: (4) ID = <10123> Status = 0 0 0 0 ok 2008-Dec-21 04:57:13 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Dec-21 04:57:13 LOG5 end_task: Level: (4) ID = <10123> Status = 0 0 0 0 ok 2008-Dec-21 04:57:13 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Dec-21 04:57:13 INFO2 waittrk: Now tracking AGES3193_p2_002 2008-Dec-21 04:57:13 LOG4 waittrk: Current telescope position: Az = 123.06 ZA = 10.41 2008-Dec-21 04:57:13 STOP finish_task: Finishing task 'waiting on telescope' 2008-Dec-21 04:57:13 LOG5 finish_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2008-Dec-21 04:57:13 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Dec-21 04:57:13 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-21 04:57:13 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Dec-21 04:57:13 LOG5 end_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2008-Dec-21 04:57:13 START begin_task: Starting task 'selecting calibration type' 2008-Dec-21 04:57:13 LOG5 begin_task: Level: (3) ID = <10124> Status = 0 0 0 0 ok 2008-Dec-21 04:57:13 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Dec-21 04:57:13 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Dec-21 04:57:13 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Dec-21 04:57:13 START begin_task: Starting task 'waiting on setcal' 2008-Dec-21 04:57:13 LOG5 begin_task: Level: (4) ID = <10125> Status = 0 0 0 0 ok 2008-Dec-21 04:57:13 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Dec-21 04:57:13 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Dec-21 04:57:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 04:57:14 LOG4 got_cormsg: From DATATAKING: DONE 2008-Dec-21 04:57:14 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Dec-21 04:57:14 LOG5 end_task: Level: (4) ID = <10125> Status = 0 0 0 0 ok 2008-Dec-21 04:57:14 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Dec-21 04:57:14 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Dec-21 04:57:14 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Dec-21 04:57:14 START begin_task: Starting task 'waiting on command to ALFA' 2008-Dec-21 04:57:14 LOG5 begin_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2008-Dec-21 04:57:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 04:57:14 LOG4 got_alfamon: From ALFAMON: ACK 2008-Dec-21 04:57:14 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Dec-21 04:57:14 LOG5 end_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2008-Dec-21 04:57:14 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Dec-21 04:57:14 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Dec-21 04:57:14 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Dec-21 04:57:14 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Dec-21 04:57:14 START begin_task: Starting task 'waiting on command to ALFA' 2008-Dec-21 04:57:14 LOG5 begin_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2008-Dec-21 04:57:14 LOG4 got_alfamon: From ALFAMON: ACK 2008-Dec-21 04:57:14 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Dec-21 04:57:14 LOG5 end_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2008-Dec-21 04:57:14 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Dec-21 04:57:14 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Dec-21 04:57:14 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Dec-21 04:57:14 LOG5 end_task: Level: (3) ID = <10124> Status = 0 0 0 0 ok 2008-Dec-21 04:57:14 LOG5 dopset_later: Calling 'dopset_later 6.5702174825538853' 2008-Dec-21 04:57:14 INFO3 dopset_later: Setting Doppler correction for 04:57:21 (6.6 seconds from now) 2008-Dec-21 04:57:14 LOG5 antvel: Calling 'antvel 123.280000 10.403945 F 6.5702174825538853' 2008-Dec-21 04:57:14 LOG2 antvel: Transforming current Az = 123.28 ZA = 10.40 to apparent RA = 09:53:32.2 Dec = +23:48:48.3 2008-Dec-21 04:57:14 LOG2 antvel: Parameters to Doppler: Heliocentric 32241 2008 356 0.0 2008-Dec-21 04:57:14 INFO5 antvel: Computed antenna velocity: -23.50162 km/s 2008-Dec-21 04:57:14 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-23.501617857500001 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Dec-21 04:57:14 INFO4 dopset_gen: New sky frequencies: 1381.351717 1381.351717 1381.351717 1381.351717 1381.351717 1381.351717 1381.351717 1381.351717 1381.351717 2008-Dec-21 04:57:14 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.351717 sky0=1381.351717 sky1=1381.351717 sky2=1381.351717 sky3=1381.351717 sky4=1381.351717 sky5=1381.351717 sky6=1381.351717 sky7=1381.351717 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Dec-21 04:57:14 LOG2 dopset_gen: Result from 'sky2syn': 1631.351717 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Dec-21 04:57:14 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631351717.0} 2008-Dec-21 04:57:14 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-21 04:57:14 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Dec-21 04:57:14 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Dec-21 04:57:14 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:58.2 Dec = +23:51:21.4 2008-Dec-21 04:57:14 LOG3 track_source: Calling 'track_source AGES3193_p2_002 095258.2 235121.4 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Dec-21 04:57:14 START begin_task: Starting task 'sending tracking commands' 2008-Dec-21 04:57:14 LOG5 begin_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2008-Dec-21 04:57:14 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_002} INFO {Slewing to source 'AGES3193_p2_002' ...} 2008-Dec-21 04:57:14 INFO1 track_source: Starting to track AGES3193_p2_002 2008-Dec-21 04:57:14 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_002" 2008-Dec-21 04:57:14 LOG3 vw_send: To DATATAKING: set ra 095258.2 2008-Dec-21 04:57:14 LOG3 vw_send: To DATATAKING: set dec 235121.4 2008-Dec-21 04:57:14 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Dec-21 04:57:14 LOG3 vw_send: To DATATAKING: pnt tr 095258.2 235121.4 -CJ 2008-Dec-21 04:57:14 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Dec-21 04:57:14 STOP finish_task: Finishing task 'sending tracking commands' 2008-Dec-21 04:57:14 LOG5 finish_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2008-Dec-21 04:57:14 INFO2 finish_task: DONE finished sending: tracking commands 2008-Dec-21 04:57:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-21 04:57:14 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Dec-21 04:57:14 LOG5 end_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2008-Dec-21 04:57:14 START begin_task: Starting task 'waiting on telescope' 2008-Dec-21 04:57:14 LOG5 begin_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2008-Dec-21 04:57:14 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Dec-21 04:57:14 LOG3 waittrk: Start waittrk 5 2008-Dec-21 04:57:14 START begin_task: Starting task 'waiting on telescope movement' 2008-Dec-21 04:57:14 LOG5 begin_task: Level: (4) ID = <10130> Status = 0 0 0 0 ok 2008-Dec-21 04:57:14 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631351717.0} 2008-Dec-21 04:57:14 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-21 04:57:14 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_002" 2008-Dec-21 04:57:14 LOG4 got_cormsg: From DATATAKING: set ra 095258.2 2008-Dec-21 04:57:14 LOG4 got_cormsg: From DATATAKING: set dec 235121.4 2008-Dec-21 04:57:14 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Dec-21 04:57:14 LOG4 got_cormsg: From DATATAKING: vw% 095258.2 2008-Dec-21 04:57:14 LOG4 got_cormsg: From DATATAKING: vw% 235121.4 2008-Dec-21 04:57:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 04:57:14 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Dec-21 04:57:14 LOG4 got_cormsg: From DATATAKING: pnt tr 095258.2 235121.4 -CJ 2008-Dec-21 04:57:14 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Dec-21 04:57:14 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Dec-21 04:57:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 04:57:19 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Dec-21 04:57:19 LOG5 end_task: Level: (4) ID = <10130> Status = 0 0 0 0 ok 2008-Dec-21 04:57:19 START begin_task: Starting task 'waiting on telescope on source' 2008-Dec-21 04:57:19 LOG5 begin_task: Level: (4) ID = <10131> Status = 0 0 0 0 ok 2008-Dec-21 04:57:22 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Dec-21 04:57:22 LOG5 end_task: Level: (4) ID = <10131> Status = 0 0 0 0 ok 2008-Dec-21 04:57:22 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Dec-21 04:57:22 INFO2 waittrk: Now tracking AGES3193_p2_002 2008-Dec-21 04:57:22 LOG4 waittrk: Current telescope position: Az = 123.02 ZA = 10.42 2008-Dec-21 04:57:22 STOP finish_task: Finishing task 'waiting on telescope' 2008-Dec-21 04:57:22 LOG5 finish_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2008-Dec-21 04:57:22 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Dec-21 04:57:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-21 04:57:22 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Dec-21 04:57:22 LOG5 end_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2008-Dec-21 04:57:22 START begin_task: Starting task 'adjusting WAPP power' 2008-Dec-21 04:57:22 LOG5 begin_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2008-Dec-21 04:57:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Dec-21 04:57:22 INFO2 adjust_power: Starting to adjust WAPP power 2008-Dec-21 04:57:22 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Dec-21 04:57:22 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Dec-21 04:57:22 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Dec-21 04:57:22 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Dec-21 04:57:22 LOG5 begin_task: Level: (4) ID = <10133> Status = 0 0 0 0 ok 2008-Dec-21 04:57:22 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Dec-21 04:57:22 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Dec-21 04:57:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 04:57:25 LOG4 got_cormsg: From DATATAKING: DONE 2008-Dec-21 04:57:25 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Dec-21 04:57:25 LOG5 end_task: Level: (4) ID = <10133> Status = 0 0 0 0 ok 2008-Dec-21 04:57:25 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Dec-21 04:57:25 START begin_task: Starting task 'adjusting WAPP power' 2008-Dec-21 04:57:25 LOG5 begin_task: Level: (4) ID = <10134> Status = 0 0 0 0 ok 2008-Dec-21 04:57:25 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Dec-21 04:57:25 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Dec-21 04:57:25 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Dec-21 04:57:25 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Dec-21 04:57:25 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Dec-21 04:57:25 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Dec-21 04:57:25 LOG5 begin_task: Level: (5) ID = <10135> Status = 0 0 0 0 ok 2008-Dec-21 04:57:25 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Dec-21 04:57:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 04:57:25 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 7 0 dB 2008-Dec-21 04:57:25 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 2 dB 2008-Dec-21 04:57:25 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 1 dB --- beam 5: 5 5 dB 2008-Dec-21 04:57:25 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 3 dB --- beam 7: 2 3 dB 2008-Dec-21 04:57:25 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Dec-21 04:57:25 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Dec-21 04:57:25 LOG5 end_task: Level: (5) ID = <10135> Status = 0 0 0 0 ok 2008-Dec-21 04:57:25 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.926 0.943 ALFA beam 1: 0.916 0.110 2008-Dec-21 04:57:25 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.066 1.020 ALFA beam 3: 0.882 1.106 2008-Dec-21 04:57:25 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.104 0.906 ALFA beam 5: 1.078 0.943 2008-Dec-21 04:57:25 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.928 0.908 ALFA beam 7: 1.023 1.003 2008-Dec-21 04:57:25 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Dec-21 04:57:25 LOG5 finish_task: Level: (4) ID = <10134> Status = 0 0 0 0 ok 2008-Dec-21 04:57:25 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Dec-21 04:57:26 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-21 04:57:26 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Dec-21 04:57:26 LOG5 end_task: Level: (4) ID = <10134> Status = 0 0 0 0 ok 2008-Dec-21 04:57:26 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Dec-21 04:57:26 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Dec-21 04:57:26 LOG5 finish_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2008-Dec-21 04:57:26 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Dec-21 04:57:26 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-21 04:57:26 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Dec-21 04:57:26 LOG5 end_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2008-Dec-21 04:57:26 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 SS 2008-Dec-21 04:57:26 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 SS 2008-Dec-21 04:57:26 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 SS 2008-Dec-21 04:57:26 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 SS 2008-Dec-21 04:57:26 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Dec-21 04:57:26 START begin_task: Starting task 'WAPP calibration' 2008-Dec-21 04:57:26 LOG5 begin_task: Level: (3) ID = <10136> Status = 0 0 0 0 ok 2008-Dec-21 04:57:26 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Dec-21 04:57:26 START begin_task: Starting task 'selecting calibration type' 2008-Dec-21 04:57:26 LOG5 begin_task: Level: (4) ID = <10137> Status = 0 0 0 0 ok 2008-Dec-21 04:57:26 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Dec-21 04:57:26 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Dec-21 04:57:26 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Dec-21 04:57:26 START begin_task: Starting task 'waiting on setcal' 2008-Dec-21 04:57:26 LOG5 begin_task: Level: (5) ID = <10138> Status = 0 0 0 0 ok 2008-Dec-21 04:57:26 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 SS' 2008-Dec-21 04:57:26 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Dec-21 04:57:26 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Dec-21 04:57:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 04:57:26 LOG4 got_cormsg: From DATATAKING: DONE 2008-Dec-21 04:57:26 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Dec-21 04:57:26 LOG5 end_task: Level: (5) ID = <10138> Status = 0 0 0 0 ok 2008-Dec-21 04:57:26 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Dec-21 04:57:26 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Dec-21 04:57:26 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Dec-21 04:57:26 START begin_task: Starting task 'waiting on command to ALFA' 2008-Dec-21 04:57:26 LOG5 begin_task: Level: (5) ID = <10139> Status = 0 0 0 0 ok 2008-Dec-21 04:57:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 04:57:26 NOTE WAPPDATA-new_file: New FITS file: wapp.20081221.a2048.0003.fits 2008-Dec-21 04:57:26 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081221.a2048.0003.fits} 2008-Dec-21 04:57:27 LOG4 got_alfamon: From ALFAMON: ACK 2008-Dec-21 04:57:27 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Dec-21 04:57:27 LOG5 end_task: Level: (5) ID = <10139> Status = 0 0 0 0 ok 2008-Dec-21 04:57:27 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Dec-21 04:57:27 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Dec-21 04:57:27 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Dec-21 04:57:27 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Dec-21 04:57:27 START begin_task: Starting task 'waiting on command to ALFA' 2008-Dec-21 04:57:27 LOG5 begin_task: Level: (5) ID = <10140> Status = 0 0 0 0 ok 2008-Dec-21 04:57:27 LOG4 got_alfamon: From ALFAMON: ACK 2008-Dec-21 04:57:27 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Dec-21 04:57:27 LOG5 end_task: Level: (5) ID = <10140> Status = 0 0 0 0 ok 2008-Dec-21 04:57:27 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Dec-21 04:57:27 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Dec-21 04:57:27 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Dec-21 04:57:27 LOG5 end_task: Level: (4) ID = <10137> Status = 0 0 0 0 ok 2008-Dec-21 04:57:27 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Dec-21 04:57:27 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Dec-21 04:57:27 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Dec-21 04:57:27 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Dec-21 04:57:27 LOG5 begin_task: Level: (4) ID = <10141> Status = 0 0 0 0 ok 2008-Dec-21 04:57:27 LOG3 CALCONTROL-caltrig: Software trigger 2008-Dec-21 04:57:27 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Dec-21 04:57:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2008-Dec-21 04:57:27 LOG4 check_wapp_levels: WAPP-1 power levels: 0.926 0.943 0.916 0.110 2008-Dec-21 04:57:27 LOG4 check_wapp_levels: WAPP-2 power levels: 1.066 1.020 0.882 1.106 2008-Dec-21 04:57:27 LOG4 check_wapp_levels: WAPP-3 power levels: 1.104 0.906 1.078 0.943 2008-Dec-21 04:57:27 LOG4 check_wapp_levels: WAPP-4 power levels: 0.928 0.908 1.023 1.003 2008-Dec-21 04:57:27 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Dec-21 04:57:27 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Dec-21 04:57:27 LOG5 end_task: Level: (4) ID = <10141> Status = 0 0 0 0 ok 2008-Dec-21 04:57:27 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Dec-21 04:57:27 LOG4 take_data: Calling 'take_data 5 5 CAL ON -' 2008-Dec-21 04:57:27 START begin_task: Starting task 'WAPP spectral observation' 2008-Dec-21 04:57:27 LOG5 begin_task: Level: (4) ID = <10142> Status = 0 0 0 0 ok 2008-Dec-21 04:57:27 LOG5 log_alfabeam: Parameters: 9.8828333333333322 23.855944444444443 10.527290 2008.9752404175222 75.299904 2008-Dec-21 04:57:27 LOG4 log_alfabeam: ALFABEAM 0 9.882833333333334 23.855944444444443 2008-Dec-21 04:57:27 LOG4 log_alfabeam: ALFABEAM 1 9.885264734373798 23.762631462779229 2008-Dec-21 04:57:27 LOG4 log_alfabeam: ALFABEAM 2 9.890195521219569 23.824718028479339 2008-Dec-21 04:57:27 LOG4 log_alfabeam: ALFABEAM 3 9.887817130290118 23.918173598872727 2008-Dec-21 04:57:27 LOG4 log_alfabeam: ALFABEAM 4 9.880457148216772 23.949853223957852 2008-Dec-21 04:57:27 LOG4 log_alfabeam: ALFABEAM 5 9.875454468247929 23.886672779201650 2008-Dec-21 04:57:27 LOG4 log_alfabeam: ALFABEAM 6 9.877883985375615 23.792906058756625 2008-Dec-21 04:57:27 INFO2 take_data: Starting WAPP scan: 835600097 2008-Dec-21 04:57:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Dec-21 04:57:27 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Dec-21 04:57:27 LOG5 begin_task: Level: (5) ID = <10143> Status = 0 0 0 0 ok 2008-Dec-21 04:57:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Dec-21 04:57:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 32248.00 2008-Dec-21 04:57:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.351717 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Dec-21 04:57:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.351717 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-21 04:57:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.351717 MHz Flip = 1 Band = 0 Mixer = 1009.160893 MHz 2008-Dec-21 04:57:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.351717 MHz Flip = 1 Band = 0 Mixer = 1056.430758 MHz 2008-Dec-21 04:57:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.351717 MHz Flip = 1 Band = 0 Mixer = 963.569070 MHz 2008-Dec-21 04:57:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.351717 MHz Flip = 1 Band = 0 Mixer = 1170.000000 MHz 2008-Dec-21 04:57:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.351717 MHz Flip = 1 Band = 0 Mixer = 970.000000 MHz 2008-Dec-21 04:57:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.351717 MHz Flip = 1 Band = 0 Mixer = 1066.000000 MHz 2008-Dec-21 04:57:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.351717 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2008-Dec-21 04:57:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Dec-21 04:57:33 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Dec-21 04:57:33 LOG5 end_task: Level: (5) ID = <10143> Status = 0 0 0 0 ok 2008-Dec-21 04:57:33 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Dec-21 04:57:33 LOG5 end_task: Level: (4) ID = <10142> Status = 0 0 0 0 ok 2008-Dec-21 04:57:33 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Dec-21 04:57:33 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Dec-21 04:57:33 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Dec-21 04:57:33 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Dec-21 04:57:33 LOG5 begin_task: Level: (4) ID = <10144> Status = 0 0 0 0 ok 2008-Dec-21 04:57:33 LOG3 CALCONTROL-caltrig: Software trigger 2008-Dec-21 04:57:33 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Dec-21 04:57:33 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Dec-21 04:57:33 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Dec-21 04:57:33 LOG5 end_task: Level: (4) ID = <10144> Status = 0 0 0 0 ok 2008-Dec-21 04:57:33 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Dec-21 04:57:33 LOG4 take_data: Calling 'take_data 5 5 CAL OFF -' 2008-Dec-21 04:57:33 START begin_task: Starting task 'WAPP spectral observation' 2008-Dec-21 04:57:33 LOG5 begin_task: Level: (4) ID = <10145> Status = 0 0 0 0 ok 2008-Dec-21 04:57:33 LOG5 log_alfabeam: Parameters: 9.8828333333333322 23.855944444444443 10.528962 2008.9752406076507 75.299904 2008-Dec-21 04:57:33 LOG4 log_alfabeam: ALFABEAM 0 9.882833333333334 23.855944444444436 2008-Dec-21 04:57:33 LOG4 log_alfabeam: ALFABEAM 1 9.885273190663202 23.762672725685661 2008-Dec-21 04:57:33 LOG4 log_alfabeam: ALFABEAM 2 9.890198382608034 23.824844979529587 2008-Dec-21 04:57:33 LOG4 log_alfabeam: ALFABEAM 3 9.887811414372196 23.918259950985227 2008-Dec-21 04:57:33 LOG4 log_alfabeam: ALFABEAM 4 9.880448511631531 23.949811729925372 2008-Dec-21 04:57:33 LOG4 log_alfabeam: ALFABEAM 5 9.875451683773401 23.886546359348600 2008-Dec-21 04:57:33 LOG4 log_alfabeam: ALFABEAM 6 9.877889714975883 23.792821805498338 2008-Dec-21 04:57:33 INFO2 take_data: Starting WAPP scan: 835600098 2008-Dec-21 04:57:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Dec-21 04:57:34 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Dec-21 04:57:34 LOG5 begin_task: Level: (5) ID = <10146> Status = 0 0 0 0 ok 2008-Dec-21 04:57:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Dec-21 04:57:34 INFO5 check_wapp_levels: WAPP power levels are between 0.117 and 1.553 (still bad) 2008-Dec-21 04:57:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 32255.00 2008-Dec-21 04:57:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.351717 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Dec-21 04:57:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.351717 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-21 04:57:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.351717 MHz Flip = 1 Band = 0 Mixer = 1009.160893 MHz 2008-Dec-21 04:57:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.351717 MHz Flip = 1 Band = 0 Mixer = 1056.430758 MHz 2008-Dec-21 04:57:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.351717 MHz Flip = 1 Band = 0 Mixer = 963.569070 MHz 2008-Dec-21 04:57:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.351717 MHz Flip = 1 Band = 0 Mixer = 1170.000000 MHz 2008-Dec-21 04:57:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.351717 MHz Flip = 1 Band = 0 Mixer = 970.000000 MHz 2008-Dec-21 04:57:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.351717 MHz Flip = 1 Band = 0 Mixer = 1066.000000 MHz 2008-Dec-21 04:57:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.351717 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2008-Dec-21 04:57:40 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Dec-21 04:57:40 INFO5 check_wapp_levels: WAPP power levels are between 0.117 and 1.524 (still bad) 2008-Dec-21 04:57:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Dec-21 04:57:40 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Dec-21 04:57:40 LOG5 end_task: Level: (5) ID = <10146> Status = 0 0 0 0 ok 2008-Dec-21 04:57:40 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Dec-21 04:57:40 LOG5 end_task: Level: (4) ID = <10145> Status = 0 0 0 0 ok 2008-Dec-21 04:57:40 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Dec-21 04:57:40 STOP finish_task: Finishing task 'WAPP calibration' 2008-Dec-21 04:57:40 LOG5 finish_task: Level: (3) ID = <10136> Status = 0 0 0 0 ok 2008-Dec-21 04:57:40 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Dec-21 04:57:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-21 04:57:40 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Dec-21 04:57:40 LOG5 end_task: Level: (3) ID = <10136> Status = 0 0 0 0 ok 2008-Dec-21 04:57:40 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Dec-21 04:57:40 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 123.28 and ZA = 10.40 2008-Dec-21 04:57:40 LOG3 track_source: Calling 'track_source AGES3193_p2_002 123.28 10.4039451245 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Dec-21 04:57:40 START begin_task: Starting task 'sending tracking commands' 2008-Dec-21 04:57:40 LOG5 begin_task: Level: (3) ID = <10147> Status = 0 0 0 0 ok 2008-Dec-21 04:57:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_002} INFO {Slewing to source 'AGES3193_p2_002' ...} 2008-Dec-21 04:57:40 INFO1 track_source: Starting to track AGES3193_p2_002 2008-Dec-21 04:57:40 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_002" 2008-Dec-21 04:57:40 LOG3 vw_send: To DATATAKING: set ra 123.28 2008-Dec-21 04:57:40 LOG3 vw_send: To DATATAKING: set dec 10.4039451245 2008-Dec-21 04:57:40 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Dec-21 04:57:40 LOG3 vw_send: To DATATAKING: pnt tr 123.28 10.4039451245 -CF 2008-Dec-21 04:57:40 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Dec-21 04:57:40 STOP finish_task: Finishing task 'sending tracking commands' 2008-Dec-21 04:57:40 LOG5 finish_task: Level: (3) ID = <10147> Status = 0 0 0 0 ok 2008-Dec-21 04:57:40 INFO2 finish_task: DONE finished sending: tracking commands 2008-Dec-21 04:57:41 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-21 04:57:41 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Dec-21 04:57:41 LOG5 end_task: Level: (3) ID = <10147> Status = 0 0 0 0 ok 2008-Dec-21 04:57:41 LOG1 fixed_driftmap: Parameters: HA = +00:37:59.6 Start = 10:31:31.8 LST = 10:31:51.3 diff = -19.5 secs 2008-Dec-21 04:57:41 WARNING fixed_driftmap: WARNING RA has already passed --- starting anyway! 2008-Dec-21 04:57:41 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Dec-21 04:57:41 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Dec-21 04:57:41 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Dec-21 04:57:41 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Dec-21 04:57:41 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ -' 2008-Dec-21 04:57:41 START begin_task: Starting task 'WAPP spectral observation' 2008-Dec-21 04:57:41 LOG5 begin_task: Level: (3) ID = <10148> Status = 0 0 0 0 ok 2008-Dec-21 04:57:41 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Dec-21 04:57:41 INFO2 take_data: Starting WAPP scan: 835600099 2008-Dec-21 04:57:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Dec-21 04:57:41 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Dec-21 04:57:41 LOG5 begin_task: Level: (4) ID = <10149> Status = 0 0 0 0 ok 2008-Dec-21 04:57:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Dec-21 04:57:41 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_002" 2008-Dec-21 04:57:41 LOG4 got_cormsg: From DATATAKING: set ra 123.28 2008-Dec-21 04:57:41 LOG4 got_cormsg: From DATATAKING: set dec 10.4039451245 2008-Dec-21 04:57:41 LOG4 got_cormsg: From DATATAKING: vw% 123.28 2008-Dec-21 04:57:41 LOG4 got_cormsg: From DATATAKING: vw% 10.4039451245 2008-Dec-21 04:57:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 04:57:41 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Dec-21 04:57:41 LOG4 got_cormsg: From DATATAKING: pnt tr 123.28 10.4039451245 -CF 2008-Dec-21 04:57:41 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Dec-21 04:57:41 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Dec-21 04:57:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 04:57:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 32262.00 2008-Dec-21 04:57:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.351717 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Dec-21 04:57:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.351717 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-21 04:57:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.351717 MHz Flip = 1 Band = 0 Mixer = 1009.160893 MHz 2008-Dec-21 04:57:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.351717 MHz Flip = 1 Band = 0 Mixer = 1056.430758 MHz 2008-Dec-21 04:57:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.351717 MHz Flip = 1 Band = 0 Mixer = 963.569070 MHz 2008-Dec-21 04:57:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.351717 MHz Flip = 1 Band = 0 Mixer = 1170.000000 MHz 2008-Dec-21 04:57:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.351717 MHz Flip = 1 Band = 0 Mixer = 970.000000 MHz 2008-Dec-21 04:57:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.351717 MHz Flip = 1 Band = 0 Mixer = 1066.000000 MHz 2008-Dec-21 04:57:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.351717 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2008-Dec-21 04:57:45 WARNING WAPP=1+2+3+4-start_spectra: WARNING observing when not on source 2008-Dec-21 04:57:46 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad) 2008-Dec-21 04:57:48 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.107 (still bad) 2008-Dec-21 04:57:50 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad) 2008-Dec-21 04:57:52 NOTE WAPP=1+2+3+4-start_spectra: Observing now on source 2008-Dec-21 04:57:52 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad) 2008-Dec-21 04:57:54 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.113 (still bad) 2008-Dec-21 04:57:56 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad) 2008-Dec-21 04:57:58 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad) 2008-Dec-21 04:58:00 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad) 2008-Dec-21 04:58:02 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad) 2008-Dec-21 04:58:04 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad) 2008-Dec-21 04:58:06 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2008-Dec-21 04:58:08 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad) 2008-Dec-21 04:58:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2008-Dec-21 04:58:12 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad) 2008-Dec-21 04:58:15 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad) 2008-Dec-21 04:58:17 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad) 2008-Dec-21 04:58:19 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2008-Dec-21 04:58:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2008-Dec-21 04:58:23 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad) 2008-Dec-21 04:58:25 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad) 2008-Dec-21 04:58:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2008-Dec-21 04:58:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2008-Dec-21 04:58:29 LOG4 check_wapp_levels: WAPP-1 power levels: 0.925 0.943 0.916 0.111 2008-Dec-21 04:58:29 LOG4 check_wapp_levels: WAPP-2 power levels: 1.066 1.010 0.901 1.110 2008-Dec-21 04:58:29 LOG4 check_wapp_levels: WAPP-3 power levels: 1.102 0.903 1.079 0.940 2008-Dec-21 04:58:29 LOG4 check_wapp_levels: WAPP-4 power levels: 0.931 0.912 1.027 1.008 2008-Dec-21 04:58:31 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2008-Dec-21 04:58:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2008-Dec-21 04:58:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2008-Dec-21 04:58:37 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad) 2008-Dec-21 04:58:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2008-Dec-21 04:58:41 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad) 2008-Dec-21 04:58:43 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.117 (still bad) 2008-Dec-21 04:58:45 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad) 2008-Dec-21 04:58:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2008-Dec-21 04:58:49 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad) 2008-Dec-21 04:58:50 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 04:58:50.299 (seconds: 17930.299)!} 2008-Dec-21 04:58:50 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 04:58:50.299 (seconds: 17930.299)! 2008-Dec-21 04:58:51 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 17929.0 to 17930.0! 2008-Dec-21 04:58:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2008-Dec-21 04:58:52 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (17929.0 - 17931.0)! 2008-Dec-21 04:58:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2008-Dec-21 04:58:55 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2008-Dec-21 04:58:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2008-Dec-21 04:58:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2008-Dec-21 04:59:01 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad) 2008-Dec-21 04:59:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2008-Dec-21 04:59:05 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad) 2008-Dec-21 04:59:07 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.116 (still bad) 2008-Dec-21 04:59:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2008-Dec-21 04:59:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2008-Dec-21 04:59:13 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad) 2008-Dec-21 04:59:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2008-Dec-21 04:59:17 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad) 2008-Dec-21 04:59:19 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.118 (still bad) 2008-Dec-21 04:59:21 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad) 2008-Dec-21 04:59:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2008-Dec-21 04:59:25 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2008-Dec-21 04:59:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2008-Dec-21 04:59:29 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad) 2008-Dec-21 04:59:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.112 < 0.75)! 2008-Dec-21 04:59:31 LOG4 check_wapp_levels: WAPP-1 power levels: 0.933 0.950 0.922 0.112 2008-Dec-21 04:59:31 LOG4 check_wapp_levels: WAPP-2 power levels: 1.074 1.022 0.907 1.118 2008-Dec-21 04:59:31 LOG4 check_wapp_levels: WAPP-3 power levels: 1.103 0.903 1.080 0.943 2008-Dec-21 04:59:31 LOG4 check_wapp_levels: WAPP-4 power levels: 0.937 0.918 1.035 1.014 2008-Dec-21 04:59:33 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad) 2008-Dec-21 04:59:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2008-Dec-21 04:59:37 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2008-Dec-21 04:59:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2008-Dec-21 04:59:41 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad) 2008-Dec-21 04:59:43 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2008-Dec-21 04:59:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2008-Dec-21 04:59:48 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad) 2008-Dec-21 04:59:50 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad) 2008-Dec-21 04:59:52 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad) 2008-Dec-21 04:59:54 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.117 (still bad) 2008-Dec-21 04:59:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2008-Dec-21 04:59:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2008-Dec-21 05:00:00 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2008-Dec-21 05:00:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2008-Dec-21 05:00:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2008-Dec-21 05:00:06 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2008-Dec-21 05:00:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2008-Dec-21 05:00:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2008-Dec-21 05:00:12 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad) 2008-Dec-21 05:00:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2008-Dec-21 05:00:16 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad) 2008-Dec-21 05:00:18 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2008-Dec-21 05:00:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2008-Dec-21 05:00:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2008-Dec-21 05:00:24 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2008-Dec-21 05:00:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2008-Dec-21 05:00:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2008-Dec-21 05:00:30 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2008-Dec-21 05:00:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2008-Dec-21 05:00:32 LOG4 check_wapp_levels: WAPP-1 power levels: 0.924 0.944 0.916 0.110 2008-Dec-21 05:00:32 LOG4 check_wapp_levels: WAPP-2 power levels: 1.068 1.018 0.901 1.111 2008-Dec-21 05:00:32 LOG4 check_wapp_levels: WAPP-3 power levels: 1.104 0.904 1.082 0.939 2008-Dec-21 05:00:32 LOG4 check_wapp_levels: WAPP-4 power levels: 0.929 0.909 1.025 1.005 2008-Dec-21 05:00:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2008-Dec-21 05:00:36 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad) 2008-Dec-21 05:00:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2008-Dec-21 05:00:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2008-Dec-21 05:00:42 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2008-Dec-21 05:00:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2008-Dec-21 05:00:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2008-Dec-21 05:00:48 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2008-Dec-21 05:00:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2008-Dec-21 05:00:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2008-Dec-21 05:00:54 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.121 (still bad) 2008-Dec-21 05:00:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2008-Dec-21 05:00:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2008-Dec-21 05:01:00 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad) 2008-Dec-21 05:01:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2008-Dec-21 05:01:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2008-Dec-21 05:01:06 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.142 (still bad) 2008-Dec-21 05:01:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.141 (still bad) 2008-Dec-21 05:01:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.142 (still bad) 2008-Dec-21 05:01:13 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.146 (still bad) 2008-Dec-21 05:01:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2008-Dec-21 05:01:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2008-Dec-21 05:01:19 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.136 (still bad) 2008-Dec-21 05:01:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2008-Dec-21 05:01:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2008-Dec-21 05:01:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2008-Dec-21 05:01:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2008-Dec-21 05:01:29 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.121 (still bad) 2008-Dec-21 05:01:31 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.134 (still bad) 2008-Dec-21 05:01:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2008-Dec-21 05:01:33 LOG4 check_wapp_levels: WAPP-1 power levels: 0.925 0.945 0.913 0.110 2008-Dec-21 05:01:33 LOG4 check_wapp_levels: WAPP-2 power levels: 1.066 1.017 0.899 1.112 2008-Dec-21 05:01:33 LOG4 check_wapp_levels: WAPP-3 power levels: 1.135 0.928 1.082 0.938 2008-Dec-21 05:01:33 LOG4 check_wapp_levels: WAPP-4 power levels: 0.929 0.912 1.024 1.005 2008-Dec-21 05:01:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2008-Dec-21 05:01:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.142 (still bad) 2008-Dec-21 05:01:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2008-Dec-21 05:01:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2008-Dec-21 05:01:43 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.133 (still bad) 2008-Dec-21 05:01:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 05:01:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2008-Dec-21 05:01:49 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad) 2008-Dec-21 05:01:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2008-Dec-21 05:01:53 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad) 2008-Dec-21 05:01:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2008-Dec-21 05:01:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2008-Dec-21 05:01:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2008-Dec-21 05:02:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2008-Dec-21 05:02:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2008-Dec-21 05:02:05 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2008-Dec-21 05:02:07 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2008-Dec-21 05:02:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2008-Dec-21 05:02:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2008-Dec-21 05:02:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2008-Dec-21 05:02:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2008-Dec-21 05:02:17 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2008-Dec-21 05:02:19 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2008-Dec-21 05:02:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2008-Dec-21 05:02:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2008-Dec-21 05:02:25 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad) 2008-Dec-21 05:02:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2008-Dec-21 05:02:29 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad) 2008-Dec-21 05:02:31 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad) 2008-Dec-21 05:02:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2008-Dec-21 05:02:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2008-Dec-21 05:02:36 LOG4 check_wapp_levels: WAPP-1 power levels: 0.922 0.942 0.913 0.110 2008-Dec-21 05:02:36 LOG4 check_wapp_levels: WAPP-2 power levels: 1.067 1.018 0.898 1.108 2008-Dec-21 05:02:36 LOG4 check_wapp_levels: WAPP-3 power levels: 1.104 0.904 1.081 0.938 2008-Dec-21 05:02:36 LOG4 check_wapp_levels: WAPP-4 power levels: 0.928 0.911 1.021 1.005 2008-Dec-21 05:02:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2008-Dec-21 05:02:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2008-Dec-21 05:02:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2008-Dec-21 05:02:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2008-Dec-21 05:02:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2008-Dec-21 05:02:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2008-Dec-21 05:02:50 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad) 2008-Dec-21 05:02:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2008-Dec-21 05:02:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2008-Dec-21 05:02:56 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad) 2008-Dec-21 05:02:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2008-Dec-21 05:03:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2008-Dec-21 05:03:02 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad) 2008-Dec-21 05:03:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2008-Dec-21 05:03:06 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2008-Dec-21 05:03:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2008-Dec-21 05:03:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2008-Dec-21 05:03:12 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad) 2008-Dec-21 05:03:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2008-Dec-21 05:03:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2008-Dec-21 05:03:18 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2008-Dec-21 05:03:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2008-Dec-21 05:03:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2008-Dec-21 05:03:24 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad) 2008-Dec-21 05:03:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2008-Dec-21 05:03:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2008-Dec-21 05:03:30 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2008-Dec-21 05:03:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2008-Dec-21 05:03:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2008-Dec-21 05:03:36 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad) 2008-Dec-21 05:03:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2008-Dec-21 05:03:38 LOG4 check_wapp_levels: WAPP-1 power levels: 0.923 0.942 0.914 0.110 2008-Dec-21 05:03:38 LOG4 check_wapp_levels: WAPP-2 power levels: 1.065 1.010 0.900 1.105 2008-Dec-21 05:03:38 LOG4 check_wapp_levels: WAPP-3 power levels: 1.095 0.897 1.079 0.940 2008-Dec-21 05:03:38 LOG4 check_wapp_levels: WAPP-4 power levels: 0.927 0.908 1.022 1.002 2008-Dec-21 05:03:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2008-Dec-21 05:03:42 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad) 2008-Dec-21 05:03:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2008-Dec-21 05:03:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2008-Dec-21 05:03:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2008-Dec-21 05:03:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2008-Dec-21 05:03:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2008-Dec-21 05:03:55 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad) 2008-Dec-21 05:03:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2008-Dec-21 05:03:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2008-Dec-21 05:04:01 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad) 2008-Dec-21 05:04:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2008-Dec-21 05:04:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2008-Dec-21 05:04:07 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad) 2008-Dec-21 05:04:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2008-Dec-21 05:04:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2008-Dec-21 05:04:13 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad) 2008-Dec-21 05:04:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2008-Dec-21 05:04:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2008-Dec-21 05:04:19 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad) 2008-Dec-21 05:04:21 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.107 (still bad) 2008-Dec-21 05:04:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2008-Dec-21 05:04:25 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.107 (still bad) 2008-Dec-21 05:04:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2008-Dec-21 05:04:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2008-Dec-21 05:04:31 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad) 2008-Dec-21 05:04:33 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.106 (still bad) 2008-Dec-21 05:04:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2008-Dec-21 05:04:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2008-Dec-21 05:04:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2008-Dec-21 05:04:39 LOG4 check_wapp_levels: WAPP-1 power levels: 0.920 0.940 0.913 0.110 2008-Dec-21 05:04:39 LOG4 check_wapp_levels: WAPP-2 power levels: 1.065 1.006 0.897 1.104 2008-Dec-21 05:04:39 LOG4 check_wapp_levels: WAPP-3 power levels: 1.091 0.892 1.078 0.939 2008-Dec-21 05:04:39 LOG4 check_wapp_levels: WAPP-4 power levels: 0.927 0.910 1.024 1.004 2008-Dec-21 05:04:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2008-Dec-21 05:04:43 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad) 2008-Dec-21 05:04:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2008-Dec-21 05:04:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2008-Dec-21 05:04:49 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.107 (still bad) 2008-Dec-21 05:04:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2008-Dec-21 05:04:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2008-Dec-21 05:04:55 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad) 2008-Dec-21 05:04:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2008-Dec-21 05:04:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2008-Dec-21 05:05:01 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.107 (still bad) 2008-Dec-21 05:05:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2008-Dec-21 05:05:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2008-Dec-21 05:05:07 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad) 2008-Dec-21 05:05:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2008-Dec-21 05:05:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2008-Dec-21 05:05:13 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.107 (still bad) 2008-Dec-21 05:05:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2008-Dec-21 05:05:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2008-Dec-21 05:05:20 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad) 2008-Dec-21 05:05:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2008-Dec-21 05:05:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2008-Dec-21 05:05:26 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.106 (still bad) 2008-Dec-21 05:05:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2008-Dec-21 05:05:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2008-Dec-21 05:05:32 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad) 2008-Dec-21 05:05:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2008-Dec-21 05:05:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2008-Dec-21 05:05:38 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad) 2008-Dec-21 05:05:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2008-Dec-21 05:05:40 LOG4 check_wapp_levels: WAPP-1 power levels: 0.920 0.939 0.913 0.110 2008-Dec-21 05:05:40 LOG4 check_wapp_levels: WAPP-2 power levels: 1.062 1.008 0.896 1.104 2008-Dec-21 05:05:40 LOG4 check_wapp_levels: WAPP-3 power levels: 1.089 0.892 1.076 0.936 2008-Dec-21 05:05:40 LOG4 check_wapp_levels: WAPP-4 power levels: 0.925 0.910 1.021 1.006 2008-Dec-21 05:05:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2008-Dec-21 05:05:44 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2008-Dec-21 05:05:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2008-Dec-21 05:05:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2008-Dec-21 05:05:50 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad) 2008-Dec-21 05:05:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2008-Dec-21 05:05:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2008-Dec-21 05:05:56 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2008-Dec-21 05:05:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2008-Dec-21 05:06:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2008-Dec-21 05:06:02 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad) 2008-Dec-21 05:06:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2008-Dec-21 05:06:06 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad) 2008-Dec-21 05:06:08 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2008-Dec-21 05:06:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2008-Dec-21 05:06:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2008-Dec-21 05:06:14 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad) 2008-Dec-21 05:06:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2008-Dec-21 05:06:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2008-Dec-21 05:06:20 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2008-Dec-21 05:06:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2008-Dec-21 05:06:24 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad) 2008-Dec-21 05:06:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2008-Dec-21 05:06:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2008-Dec-21 05:06:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2008-Dec-21 05:06:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2008-Dec-21 05:06:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2008-Dec-21 05:06:36 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.106 (still bad) 2008-Dec-21 05:06:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2008-Dec-21 05:06:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2008-Dec-21 05:06:41 LOG4 check_wapp_levels: WAPP-1 power levels: 0.924 0.945 0.912 0.110 2008-Dec-21 05:06:41 LOG4 check_wapp_levels: WAPP-2 power levels: 1.069 1.012 0.899 1.108 2008-Dec-21 05:06:41 LOG4 check_wapp_levels: WAPP-3 power levels: 1.090 0.892 1.078 0.937 2008-Dec-21 05:06:41 LOG4 check_wapp_levels: WAPP-4 power levels: 0.929 0.913 1.026 1.008 2008-Dec-21 05:06:43 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad) 2008-Dec-21 05:06:45 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad) 2008-Dec-21 05:06:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2008-Dec-21 05:06:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2008-Dec-21 05:06:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2008-Dec-21 05:06:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2008-Dec-21 05:06:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2008-Dec-21 05:06:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2008-Dec-21 05:06:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2008-Dec-21 05:07:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2008-Dec-21 05:07:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2008-Dec-21 05:07:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2008-Dec-21 05:07:07 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad) 2008-Dec-21 05:07:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2008-Dec-21 05:07:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2008-Dec-21 05:07:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2008-Dec-21 05:07:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2008-Dec-21 05:07:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2008-Dec-21 05:07:19 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad) 2008-Dec-21 05:07:21 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad) 2008-Dec-21 05:07:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2008-Dec-21 05:07:25 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad) 2008-Dec-21 05:07:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2008-Dec-21 05:07:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2008-Dec-21 05:07:31 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad) 2008-Dec-21 05:07:33 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad) 2008-Dec-21 05:07:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2008-Dec-21 05:07:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2008-Dec-21 05:07:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2008-Dec-21 05:07:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2008-Dec-21 05:07:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2008-Dec-21 05:07:43 LOG4 check_wapp_levels: WAPP-1 power levels: 0.921 0.942 0.911 0.111 2008-Dec-21 05:07:43 LOG4 check_wapp_levels: WAPP-2 power levels: 1.065 1.012 0.900 1.107 2008-Dec-21 05:07:43 LOG4 check_wapp_levels: WAPP-3 power levels: 1.096 0.899 1.085 0.943 2008-Dec-21 05:07:43 LOG4 check_wapp_levels: WAPP-4 power levels: 0.930 0.915 1.028 1.010 2008-Dec-21 05:07:45 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.107 (still bad) 2008-Dec-21 05:07:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2008-Dec-21 05:07:49 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.107 (still bad) 2008-Dec-21 05:07:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2008-Dec-21 05:07:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2008-Dec-21 05:07:55 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.107 (still bad) 2008-Dec-21 05:07:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2008-Dec-21 05:07:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2008-Dec-21 05:08:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2008-Dec-21 05:08:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2008-Dec-21 05:08:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2008-Dec-21 05:08:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2008-Dec-21 05:08:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2008-Dec-21 05:08:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2008-Dec-21 05:08:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2008-Dec-21 05:08:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2008-Dec-21 05:08:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2008-Dec-21 05:08:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2008-Dec-21 05:08:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2008-Dec-21 05:08:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2008-Dec-21 05:08:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2008-Dec-21 05:08:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2008-Dec-21 05:08:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2008-Dec-21 05:08:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2008-Dec-21 05:08:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2008-Dec-21 05:08:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2008-Dec-21 05:08:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2008-Dec-21 05:08:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2008-Dec-21 05:08:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2008-Dec-21 05:08:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2008-Dec-21 05:08:44 LOG4 check_wapp_levels: WAPP-1 power levels: 0.923 0.940 0.921 0.110 2008-Dec-21 05:08:44 LOG4 check_wapp_levels: WAPP-2 power levels: 1.068 1.012 0.899 1.108 2008-Dec-21 05:08:44 LOG4 check_wapp_levels: WAPP-3 power levels: 1.095 0.899 1.084 0.943 2008-Dec-21 05:08:44 LOG4 check_wapp_levels: WAPP-4 power levels: 0.932 0.913 1.030 1.010 2008-Dec-21 05:08:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2008-Dec-21 05:08:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2008-Dec-21 05:08:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2008-Dec-21 05:08:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2008-Dec-21 05:08:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2008-Dec-21 05:08:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2008-Dec-21 05:08:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2008-Dec-21 05:09:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2008-Dec-21 05:09:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2008-Dec-21 05:09:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2008-Dec-21 05:09:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2008-Dec-21 05:09:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2008-Dec-21 05:09:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2008-Dec-21 05:09:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2008-Dec-21 05:09:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2008-Dec-21 05:09:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2008-Dec-21 05:09:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2008-Dec-21 05:09:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2008-Dec-21 05:09:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2008-Dec-21 05:09:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2008-Dec-21 05:09:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2008-Dec-21 05:09:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2008-Dec-21 05:09:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2008-Dec-21 05:09:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2008-Dec-21 05:09:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2008-Dec-21 05:09:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2008-Dec-21 05:09:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2008-Dec-21 05:09:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2008-Dec-21 05:09:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2008-Dec-21 05:09:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2008-Dec-21 05:09:45 LOG4 check_wapp_levels: WAPP-1 power levels: 0.927 0.945 0.913 0.110 2008-Dec-21 05:09:45 LOG4 check_wapp_levels: WAPP-2 power levels: 1.069 1.012 0.898 1.106 2008-Dec-21 05:09:45 LOG4 check_wapp_levels: WAPP-3 power levels: 1.093 0.898 1.083 0.941 2008-Dec-21 05:09:45 LOG4 check_wapp_levels: WAPP-4 power levels: 0.931 0.917 1.029 1.011 2008-Dec-21 05:09:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2008-Dec-21 05:09:49 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad) 2008-Dec-21 05:09:51 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2008-Dec-21 05:09:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2008-Dec-21 05:09:55 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2008-Dec-21 05:09:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2008-Dec-21 05:09:59 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2008-Dec-21 05:10:01 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad) 2008-Dec-21 05:10:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2008-Dec-21 05:10:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2008-Dec-21 05:10:07 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2008-Dec-21 05:10:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2008-Dec-21 05:10:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2008-Dec-21 05:10:13 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad) 2008-Dec-21 05:10:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2008-Dec-21 05:10:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2008-Dec-21 05:10:19 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2008-Dec-21 05:10:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2008-Dec-21 05:10:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2008-Dec-21 05:10:25 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad) 2008-Dec-21 05:10:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2008-Dec-21 05:10:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2008-Dec-21 05:10:31 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2008-Dec-21 05:10:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2008-Dec-21 05:10:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2008-Dec-21 05:10:37 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad) 2008-Dec-21 05:10:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2008-Dec-21 05:10:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2008-Dec-21 05:10:43 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2008-Dec-21 05:10:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2008-Dec-21 05:10:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2008-Dec-21 05:10:47 LOG4 check_wapp_levels: WAPP-1 power levels: 0.925 0.941 0.913 0.110 2008-Dec-21 05:10:47 LOG4 check_wapp_levels: WAPP-2 power levels: 1.066 1.013 0.902 1.105 2008-Dec-21 05:10:47 LOG4 check_wapp_levels: WAPP-3 power levels: 1.096 0.897 1.078 0.936 2008-Dec-21 05:10:47 LOG4 check_wapp_levels: WAPP-4 power levels: 0.931 0.915 1.028 1.010 2008-Dec-21 05:10:49 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad) 2008-Dec-21 05:10:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2008-Dec-21 05:10:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2008-Dec-21 05:10:55 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2008-Dec-21 05:10:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2008-Dec-21 05:11:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2008-Dec-21 05:11:02 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad) 2008-Dec-21 05:11:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2008-Dec-21 05:11:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2008-Dec-21 05:11:08 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2008-Dec-21 05:11:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2008-Dec-21 05:11:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2008-Dec-21 05:11:14 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad) 2008-Dec-21 05:11:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2008-Dec-21 05:11:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2008-Dec-21 05:11:20 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2008-Dec-21 05:11:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2008-Dec-21 05:11:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2008-Dec-21 05:11:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2008-Dec-21 05:11:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2008-Dec-21 05:11:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2008-Dec-21 05:11:32 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad) 2008-Dec-21 05:11:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2008-Dec-21 05:11:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2008-Dec-21 05:11:38 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.106 (still bad) 2008-Dec-21 05:11:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2008-Dec-21 05:11:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2008-Dec-21 05:11:44 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad) 2008-Dec-21 05:11:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2008-Dec-21 05:11:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2008-Dec-21 05:11:48 LOG4 check_wapp_levels: WAPP-1 power levels: 0.921 0.940 0.911 0.110 2008-Dec-21 05:11:48 LOG4 check_wapp_levels: WAPP-2 power levels: 1.063 1.007 0.897 1.103 2008-Dec-21 05:11:48 LOG4 check_wapp_levels: WAPP-3 power levels: 1.090 0.896 1.078 0.935 2008-Dec-21 05:11:48 LOG4 check_wapp_levels: WAPP-4 power levels: 0.928 0.911 1.021 1.005 2008-Dec-21 05:11:50 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.107 (still bad) 2008-Dec-21 05:11:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2008-Dec-21 05:11:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2008-Dec-21 05:11:56 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad) 2008-Dec-21 05:11:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2008-Dec-21 05:12:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2008-Dec-21 05:12:02 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad) 2008-Dec-21 05:12:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2008-Dec-21 05:12:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2008-Dec-21 05:12:08 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2008-Dec-21 05:12:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2008-Dec-21 05:12:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2008-Dec-21 05:12:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2008-Dec-21 05:12:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2008-Dec-21 05:12:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 05:12:20 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.127 (still bad) 2008-Dec-21 05:12:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2008-Dec-21 05:12:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2008-Dec-21 05:12:26 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.130 (still bad) 2008-Dec-21 05:12:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2008-Dec-21 05:12:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2008-Dec-21 05:12:33 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.131 (still bad) 2008-Dec-21 05:12:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad) 2008-Dec-21 05:12:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2008-Dec-21 05:12:39 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2008-Dec-21 05:12:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2008-Dec-21 05:12:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2008-Dec-21 05:12:45 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2008-Dec-21 05:12:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2008-Dec-21 05:12:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2008-Dec-21 05:12:49 LOG4 check_wapp_levels: WAPP-1 power levels: 0.922 0.941 0.916 0.110 2008-Dec-21 05:12:49 LOG4 check_wapp_levels: WAPP-2 power levels: 1.067 1.006 0.902 1.109 2008-Dec-21 05:12:49 LOG4 check_wapp_levels: WAPP-3 power levels: 1.122 0.917 1.079 0.939 2008-Dec-21 05:12:49 LOG4 check_wapp_levels: WAPP-4 power levels: 0.928 0.913 1.023 1.007 2008-Dec-21 05:12:51 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.122 (still bad) 2008-Dec-21 05:12:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2008-Dec-21 05:12:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad) 2008-Dec-21 05:12:57 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2008-Dec-21 05:12:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2008-Dec-21 05:13:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2008-Dec-21 05:13:03 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad) 2008-Dec-21 05:13:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2008-Dec-21 05:13:07 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2008-Dec-21 05:13:09 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2008-Dec-21 05:13:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2008-Dec-21 05:13:13 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad) 2008-Dec-21 05:13:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2008-Dec-21 05:13:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2008-Dec-21 05:13:19 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad) 2008-Dec-21 05:13:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2008-Dec-21 05:13:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2008-Dec-21 05:13:25 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad) 2008-Dec-21 05:13:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2008-Dec-21 05:13:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2008-Dec-21 05:13:31 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad) 2008-Dec-21 05:13:33 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad) 2008-Dec-21 05:13:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2008-Dec-21 05:13:37 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad) 2008-Dec-21 05:13:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2008-Dec-21 05:13:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2008-Dec-21 05:13:43 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad) 2008-Dec-21 05:13:45 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.107 (still bad) 2008-Dec-21 05:13:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2008-Dec-21 05:13:49 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 05:13:49.299 (seconds: 18829.299)!} 2008-Dec-21 05:13:49 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 05:13:49.299 (seconds: 18829.299)! 2008-Dec-21 05:13:49 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad) 2008-Dec-21 05:13:50 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 18828.0 to 18829.0! 2008-Dec-21 05:13:51 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (18828.0 - 18830.0)! 2008-Dec-21 05:13:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2008-Dec-21 05:13:52 LOG4 check_wapp_levels: WAPP-1 power levels: 0.941 0.961 0.915 0.110 2008-Dec-21 05:13:52 LOG4 check_wapp_levels: WAPP-2 power levels: 1.066 1.005 0.901 1.105 2008-Dec-21 05:13:52 LOG4 check_wapp_levels: WAPP-3 power levels: 1.091 0.896 1.080 0.940 2008-Dec-21 05:13:52 LOG4 check_wapp_levels: WAPP-4 power levels: 0.932 0.913 1.027 1.007 2008-Dec-21 05:13:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2008-Dec-21 05:13:56 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.106 (still bad) 2008-Dec-21 05:13:58 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.107 (still bad) 2008-Dec-21 05:14:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2008-Dec-21 05:14:02 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.107 (still bad) 2008-Dec-21 05:14:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2008-Dec-21 05:14:06 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.106 (still bad) 2008-Dec-21 05:14:08 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.107 (still bad) 2008-Dec-21 05:14:10 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.107 (still bad) 2008-Dec-21 05:14:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2008-Dec-21 05:14:14 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.107 (still bad) 2008-Dec-21 05:14:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2008-Dec-21 05:14:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2008-Dec-21 05:14:20 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad) 2008-Dec-21 05:14:22 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.107 (still bad) 2008-Dec-21 05:14:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2008-Dec-21 05:14:26 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.107 (still bad) 2008-Dec-21 05:14:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2008-Dec-21 05:14:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2008-Dec-21 05:14:32 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad) 2008-Dec-21 05:14:34 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.106 (still bad) 2008-Dec-21 05:14:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2008-Dec-21 05:14:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2008-Dec-21 05:14:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2008-Dec-21 05:14:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2008-Dec-21 05:14:44 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad) 2008-Dec-21 05:14:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2008-Dec-21 05:14:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2008-Dec-21 05:14:50 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad) 2008-Dec-21 05:14:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2008-Dec-21 05:14:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2008-Dec-21 05:14:54 LOG4 check_wapp_levels: WAPP-1 power levels: 0.924 0.942 0.913 0.111 2008-Dec-21 05:14:54 LOG4 check_wapp_levels: WAPP-2 power levels: 1.066 1.009 0.901 1.106 2008-Dec-21 05:14:54 LOG4 check_wapp_levels: WAPP-3 power levels: 1.095 0.895 1.078 0.937 2008-Dec-21 05:14:54 LOG4 check_wapp_levels: WAPP-4 power levels: 0.931 0.913 1.025 1.007 2008-Dec-21 05:14:56 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad) 2008-Dec-21 05:14:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2008-Dec-21 05:15:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2008-Dec-21 05:15:02 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad) 2008-Dec-21 05:15:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2008-Dec-21 05:15:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2008-Dec-21 05:15:08 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad) 2008-Dec-21 05:15:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2008-Dec-21 05:15:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad) 2008-Dec-21 05:15:15 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.107 (still bad) 2008-Dec-21 05:15:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad) 2008-Dec-21 05:15:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2008-Dec-21 05:15:21 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad) 2008-Dec-21 05:15:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2008-Dec-21 05:15:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2008-Dec-21 05:15:27 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.106 (still bad) 2008-Dec-21 05:15:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad) 2008-Dec-21 05:15:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2008-Dec-21 05:15:33 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad) 2008-Dec-21 05:15:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2008-Dec-21 05:15:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad) 2008-Dec-21 05:15:39 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.107 (still bad) 2008-Dec-21 05:15:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad) 2008-Dec-21 05:15:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2008-Dec-21 05:15:45 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2008-Dec-21 05:15:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2008-Dec-21 05:15:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2008-Dec-21 05:15:51 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad) 2008-Dec-21 05:15:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2008-Dec-21 05:15:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2008-Dec-21 05:15:55 LOG4 check_wapp_levels: WAPP-1 power levels: 0.924 0.942 0.910 0.110 2008-Dec-21 05:15:55 LOG4 check_wapp_levels: WAPP-2 power levels: 1.068 1.009 0.901 1.108 2008-Dec-21 05:15:55 LOG4 check_wapp_levels: WAPP-3 power levels: 1.097 0.895 1.077 0.937 2008-Dec-21 05:15:55 LOG4 check_wapp_levels: WAPP-4 power levels: 0.927 0.912 1.022 1.006 2008-Dec-21 05:15:57 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2008-Dec-21 05:15:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2008-Dec-21 05:16:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2008-Dec-21 05:16:03 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad) 2008-Dec-21 05:16:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2008-Dec-21 05:16:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2008-Dec-21 05:16:09 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2008-Dec-21 05:16:11 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad) 2008-Dec-21 05:16:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2008-Dec-21 05:16:15 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad) 2008-Dec-21 05:16:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2008-Dec-21 05:16:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2008-Dec-21 05:16:21 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.114 (still bad) 2008-Dec-21 05:16:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2008-Dec-21 05:16:25 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad) 2008-Dec-21 05:16:27 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.107 (still bad) 2008-Dec-21 05:16:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2008-Dec-21 05:16:31 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad) 2008-Dec-21 05:16:34 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad) 2008-Dec-21 05:16:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2008-Dec-21 05:16:38 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.106 (still bad) 2008-Dec-21 05:16:40 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.107 (still bad) 2008-Dec-21 05:16:42 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad) 2008-Dec-21 05:16:44 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad) 2008-Dec-21 05:16:46 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2008-Dec-21 05:16:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2008-Dec-21 05:16:50 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad) 2008-Dec-21 05:16:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2008-Dec-21 05:16:54 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad) 2008-Dec-21 05:16:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.112 < 0.75)! 2008-Dec-21 05:16:56 LOG4 check_wapp_levels: WAPP-1 power levels: 0.933 0.953 0.918 0.112 2008-Dec-21 05:16:56 LOG4 check_wapp_levels: WAPP-2 power levels: 1.074 1.016 0.916 1.126 2008-Dec-21 05:16:56 LOG4 check_wapp_levels: WAPP-3 power levels: 1.103 0.901 1.078 0.938 2008-Dec-21 05:16:56 LOG4 check_wapp_levels: WAPP-4 power levels: 0.928 0.914 1.022 1.007 2008-Dec-21 05:16:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2008-Dec-21 05:17:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2008-Dec-21 05:17:02 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2008-Dec-21 05:17:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2008-Dec-21 05:17:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2008-Dec-21 05:17:08 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.115 (still bad) 2008-Dec-21 05:17:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2008-Dec-21 05:17:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2008-Dec-21 05:17:14 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad) 2008-Dec-21 05:17:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2008-Dec-21 05:17:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2008-Dec-21 05:17:20 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.116 (still bad) 2008-Dec-21 05:17:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2008-Dec-21 05:17:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2008-Dec-21 05:17:26 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad) 2008-Dec-21 05:17:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2008-Dec-21 05:17:30 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad) 2008-Dec-21 05:17:32 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.117 (still bad) 2008-Dec-21 05:17:34 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad) 2008-Dec-21 05:17:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2008-Dec-21 05:17:38 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad) 2008-Dec-21 05:17:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2008-Dec-21 05:17:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Dec-21 05:17:42 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Dec-21 05:17:42 LOG5 end_task: Level: (4) ID = <10149> Status = 0 0 0 0 ok 2008-Dec-21 05:17:42 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Dec-21 05:17:42 LOG5 end_task: Level: (3) ID = <10148> Status = 0 0 0 0 ok 2008-Dec-21 05:17:42 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Dec-21 05:17:42 LOG5 finish_task: Level: (2) ID = <10117> Status = 0 0 0 0 ok 2008-Dec-21 05:17:42 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Dec-21 05:17:42 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Dec-21 05:17:42 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Dec-21 05:17:42 LOG5 end_task: Level: (2) ID = <10117> Status = 0 0 0 0 ok 2008-Dec-21 05:17:42 COMMAND run_command_line: EXECUTING command 33: 'ENDIF' 2008-Dec-21 05:17:42 COMMAND run_command_line: EXECUTING command 36: 'IF LSTSLEW(AGES3193_p2_004) < 105431 THEN' 2008-Dec-21 05:17:42 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p2_004) < 105431 2008-Dec-21 05:17:42 INFO5 is_if_valid: Condition parsed as: 10.895436 < 10.908611111111112 2008-Dec-21 05:17:42 COMMAND run_command_line: EXECUTING command 37: 'FIXEDDRIFT az=113.45 alfaangle=88.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_004 ra=95300.00 dec=234830.00' 2008-Dec-21 05:17:42 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Dec-21 05:17:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2008-Dec-21 05:17:43 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Dec-21 05:17:43 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 113.45 88.4 hcorcal 5 tracking no first 1 AGES3193_p2_004 95300.00 234830.00 J 8500.0 Heliocentric velocity(optical)' 2008-Dec-21 05:17:43 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Dec-21 05:17:43 LOG5 begin_task: Level: (2) ID = <10150> Status = 0 0 0 0 ok 2008-Dec-21 05:17:43 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES3193_p2_002' 2008-Dec-21 05:17:43 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Dec-21 05:17:43 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p2_004} 2008-Dec-21 05:17:43 INFO3 fixed_driftmap: Sending telescope to Az = 113.45 and ZA = 15.21 2008-Dec-21 05:17:43 LOG3 track_source: Calling 'track_source AGES3193_p2_004 113.45 15.2127731863 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Dec-21 05:17:43 START begin_task: Starting task 'sending tracking commands' 2008-Dec-21 05:17:43 LOG5 begin_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2008-Dec-21 05:17:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_004} INFO {Slewing to source 'AGES3193_p2_004' ...} 2008-Dec-21 05:17:43 INFO1 track_source: Starting to track AGES3193_p2_004 2008-Dec-21 05:17:43 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_004" 2008-Dec-21 05:17:43 LOG3 vw_send: To DATATAKING: set ra 113.45 2008-Dec-21 05:17:43 LOG3 vw_send: To DATATAKING: set dec 15.2127731863 2008-Dec-21 05:17:43 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Dec-21 05:17:43 LOG3 vw_send: To DATATAKING: pnt tr 113.45 15.2127731863 -CF 2008-Dec-21 05:17:43 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Dec-21 05:17:43 STOP finish_task: Finishing task 'sending tracking commands' 2008-Dec-21 05:17:43 LOG5 finish_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2008-Dec-21 05:17:43 INFO2 finish_task: DONE finished sending: tracking commands 2008-Dec-21 05:17:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-21 05:17:43 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Dec-21 05:17:43 LOG5 end_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2008-Dec-21 05:17:43 START begin_task: Starting task 'rotate ALFA to +88.4 degrees' 2008-Dec-21 05:17:43 LOG5 begin_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2008-Dec-21 05:17:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +88.4 degrees ...} 2008-Dec-21 05:17:43 INFO2 rotate_alfa: ALFA commanded to +88.4 degrees 2008-Dec-21 05:17:43 LOG3 sock_errsend: To ALFAMOTOR: POSITION 88.4 REPLY 2008-Dec-21 05:17:43 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Dec-21 05:17:43 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Dec-21 05:17:43 LOG5 begin_task: Level: (4) ID = <10153> Status = 0 0 0 0 ok 2008-Dec-21 05:17:43 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_004" 2008-Dec-21 05:17:43 LOG4 got_cormsg: From DATATAKING: set ra 113.45 2008-Dec-21 05:17:43 LOG4 got_cormsg: From DATATAKING: set dec 15.2127731863 2008-Dec-21 05:17:43 LOG4 got_cormsg: From DATATAKING: vw% 113.45 2008-Dec-21 05:17:43 LOG4 got_cormsg: From DATATAKING: vw% 15.2127731863 2008-Dec-21 05:17:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 05:17:43 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Dec-21 05:17:43 LOG4 got_cormsg: From DATATAKING: pnt tr 113.45 15.2127731863 -CF 2008-Dec-21 05:17:43 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Dec-21 05:17:43 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Dec-21 05:17:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 05:17:52 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Dec-21 05:17:52 INFO3 alfa_motor: ALFA rotator in-position +88.40 degrees 2008-Dec-21 05:17:52 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Dec-21 05:17:52 LOG5 end_task: Level: (4) ID = <10153> Status = 0 0 0 0 ok 2008-Dec-21 05:17:52 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Dec-21 05:17:52 STOP finish_task: Finishing task 'rotate ALFA to +88.4 degrees' 2008-Dec-21 05:17:52 LOG5 finish_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2008-Dec-21 05:17:52 INFO2 finish_task: DONE finished configuration: rotating ALFA to +88.4 degrees 2008-Dec-21 05:17:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-21 05:17:52 STOP end_task: Finishing task 'rotate ALFA to +88.4 degrees' with status 'OK' 2008-Dec-21 05:17:52 LOG5 end_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2008-Dec-21 05:17:52 START begin_task: Starting task 'waiting on telescope' 2008-Dec-21 05:17:52 LOG5 begin_task: Level: (3) ID = <10154> Status = 0 0 0 0 ok 2008-Dec-21 05:17:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Dec-21 05:17:52 LOG3 waittrk: Start waittrk 5 2008-Dec-21 05:17:52 START begin_task: Starting task 'waiting on telescope movement' 2008-Dec-21 05:17:52 LOG5 begin_task: Level: (4) ID = <10155> Status = 0 0 0 0 ok 2008-Dec-21 05:17:57 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Dec-21 05:17:57 LOG5 end_task: Level: (4) ID = <10155> Status = 0 0 0 0 ok 2008-Dec-21 05:17:57 START begin_task: Starting task 'waiting on telescope on source' 2008-Dec-21 05:17:57 LOG5 begin_task: Level: (4) ID = <10156> Status = 0 0 0 0 ok 2008-Dec-21 05:19:48 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Dec-21 05:19:48 LOG5 end_task: Level: (4) ID = <10156> Status = 0 0 0 0 ok 2008-Dec-21 05:19:48 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Dec-21 05:19:48 INFO2 waittrk: Now tracking AGES3193_p2_004 2008-Dec-21 05:19:48 LOG4 waittrk: Current telescope position: Az = 113.20 ZA = 15.23 2008-Dec-21 05:19:48 STOP finish_task: Finishing task 'waiting on telescope' 2008-Dec-21 05:19:48 LOG5 finish_task: Level: (3) ID = <10154> Status = 0 0 0 0 ok 2008-Dec-21 05:19:48 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Dec-21 05:19:48 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-21 05:19:48 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Dec-21 05:19:48 LOG5 end_task: Level: (3) ID = <10154> Status = 0 0 0 0 ok 2008-Dec-21 05:19:48 START begin_task: Starting task 'selecting calibration type' 2008-Dec-21 05:19:48 LOG5 begin_task: Level: (3) ID = <10157> Status = 0 0 0 0 ok 2008-Dec-21 05:19:48 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Dec-21 05:19:48 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Dec-21 05:19:48 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Dec-21 05:19:48 START begin_task: Starting task 'waiting on setcal' 2008-Dec-21 05:19:48 LOG5 begin_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2008-Dec-21 05:19:48 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Dec-21 05:19:48 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Dec-21 05:19:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 05:19:49 LOG4 got_cormsg: From DATATAKING: DONE 2008-Dec-21 05:19:49 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Dec-21 05:19:49 LOG5 end_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2008-Dec-21 05:19:49 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Dec-21 05:19:49 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Dec-21 05:19:49 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Dec-21 05:19:49 START begin_task: Starting task 'waiting on command to ALFA' 2008-Dec-21 05:19:49 LOG5 begin_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2008-Dec-21 05:19:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 05:19:49 LOG4 got_alfamon: From ALFAMON: ACK 2008-Dec-21 05:19:49 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Dec-21 05:19:49 LOG5 end_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2008-Dec-21 05:19:49 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Dec-21 05:19:49 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Dec-21 05:19:49 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Dec-21 05:19:49 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Dec-21 05:19:49 START begin_task: Starting task 'waiting on command to ALFA' 2008-Dec-21 05:19:49 LOG5 begin_task: Level: (4) ID = <10160> Status = 0 0 0 0 ok 2008-Dec-21 05:19:49 LOG4 got_alfamon: From ALFAMON: ACK 2008-Dec-21 05:19:49 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Dec-21 05:19:49 LOG5 end_task: Level: (4) ID = <10160> Status = 0 0 0 0 ok 2008-Dec-21 05:19:49 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Dec-21 05:19:49 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Dec-21 05:19:49 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Dec-21 05:19:49 LOG5 end_task: Level: (3) ID = <10157> Status = 0 0 0 0 ok 2008-Dec-21 05:19:49 LOG5 dopset_later: Calling 'dopset_later 28.202928054381303' 2008-Dec-21 05:19:49 INFO3 dopset_later: Setting Doppler correction for 05:20:17 (28.2 seconds from now) 2008-Dec-21 05:19:50 LOG5 antvel: Calling 'antvel 113.450000 15.212773 F 28.202928054381303' 2008-Dec-21 05:19:50 LOG2 antvel: Transforming current Az = 113.45 ZA = 15.21 to apparent RA = 09:53:32.1 Dec = +23:45:48.3 2008-Dec-21 05:19:50 LOG2 antvel: Parameters to Doppler: Heliocentric 33617 2008 356 0.0 2008-Dec-21 05:19:50 INFO5 antvel: Computed antenna velocity: -23.46598 km/s 2008-Dec-21 05:19:50 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-23.465976049399998 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Dec-21 05:19:50 INFO4 dopset_gen: New sky frequencies: 1381.351553 1381.351553 1381.351553 1381.351553 1381.351553 1381.351553 1381.351553 1381.351553 1381.351553 2008-Dec-21 05:19:50 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.351553 sky0=1381.351553 sky1=1381.351553 sky2=1381.351553 sky3=1381.351553 sky4=1381.351553 sky5=1381.351553 sky6=1381.351553 sky7=1381.351553 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Dec-21 05:19:50 LOG2 dopset_gen: Result from 'sky2syn': 1631.351553 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Dec-21 05:19:50 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631351553.0} 2008-Dec-21 05:19:50 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-21 05:19:50 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Dec-21 05:19:50 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Dec-21 05:19:50 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:36.5 Dec = +23:48:21.3 2008-Dec-21 05:19:50 LOG3 track_source: Calling 'track_source AGES3193_p2_004 095236.5 234821.3 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Dec-21 05:19:50 START begin_task: Starting task 'sending tracking commands' 2008-Dec-21 05:19:50 LOG5 begin_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2008-Dec-21 05:19:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_004} INFO {Slewing to source 'AGES3193_p2_004' ...} 2008-Dec-21 05:19:50 INFO1 track_source: Starting to track AGES3193_p2_004 2008-Dec-21 05:19:50 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_004" 2008-Dec-21 05:19:50 LOG3 vw_send: To DATATAKING: set ra 095236.5 2008-Dec-21 05:19:50 LOG3 vw_send: To DATATAKING: set dec 234821.3 2008-Dec-21 05:19:50 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Dec-21 05:19:50 LOG3 vw_send: To DATATAKING: pnt tr 095236.5 234821.3 -CJ 2008-Dec-21 05:19:50 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Dec-21 05:19:50 STOP finish_task: Finishing task 'sending tracking commands' 2008-Dec-21 05:19:50 LOG5 finish_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2008-Dec-21 05:19:50 INFO2 finish_task: DONE finished sending: tracking commands 2008-Dec-21 05:19:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-21 05:19:50 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Dec-21 05:19:50 LOG5 end_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2008-Dec-21 05:19:50 START begin_task: Starting task 'waiting on telescope' 2008-Dec-21 05:19:50 LOG5 begin_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2008-Dec-21 05:19:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Dec-21 05:19:50 LOG3 waittrk: Start waittrk 5 2008-Dec-21 05:19:50 START begin_task: Starting task 'waiting on telescope movement' 2008-Dec-21 05:19:50 LOG5 begin_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2008-Dec-21 05:19:50 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631351553.0} 2008-Dec-21 05:19:50 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-21 05:19:50 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_004" 2008-Dec-21 05:19:50 LOG4 got_cormsg: From DATATAKING: set ra 095236.5 2008-Dec-21 05:19:50 LOG4 got_cormsg: From DATATAKING: set dec 234821.3 2008-Dec-21 05:19:50 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Dec-21 05:19:50 LOG4 got_cormsg: From DATATAKING: vw% 095236.5 2008-Dec-21 05:19:50 LOG4 got_cormsg: From DATATAKING: vw% 234821.3 2008-Dec-21 05:19:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 05:19:50 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Dec-21 05:19:50 LOG4 got_cormsg: From DATATAKING: pnt tr 095236.5 234821.3 -CJ 2008-Dec-21 05:19:50 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Dec-21 05:19:50 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Dec-21 05:19:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 05:19:55 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Dec-21 05:19:55 LOG5 end_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2008-Dec-21 05:19:55 START begin_task: Starting task 'waiting on telescope on source' 2008-Dec-21 05:19:55 LOG5 begin_task: Level: (4) ID = <10164> Status = 0 0 0 0 ok 2008-Dec-21 05:19:57 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Dec-21 05:19:57 LOG5 end_task: Level: (4) ID = <10164> Status = 0 0 0 0 ok 2008-Dec-21 05:19:57 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Dec-21 05:19:57 INFO2 waittrk: Now tracking AGES3193_p2_004 2008-Dec-21 05:19:57 LOG4 waittrk: Current telescope position: Az = 113.17 ZA = 15.24 2008-Dec-21 05:19:57 STOP finish_task: Finishing task 'waiting on telescope' 2008-Dec-21 05:19:57 LOG5 finish_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2008-Dec-21 05:19:57 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Dec-21 05:19:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-21 05:19:57 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Dec-21 05:19:57 LOG5 end_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2008-Dec-21 05:19:57 START begin_task: Starting task 'adjusting WAPP power' 2008-Dec-21 05:19:57 LOG5 begin_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2008-Dec-21 05:19:57 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Dec-21 05:19:57 INFO2 adjust_power: Starting to adjust WAPP power 2008-Dec-21 05:19:57 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Dec-21 05:19:57 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Dec-21 05:19:57 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Dec-21 05:19:57 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Dec-21 05:19:57 LOG5 begin_task: Level: (4) ID = <10166> Status = 0 0 0 0 ok 2008-Dec-21 05:19:57 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Dec-21 05:19:57 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Dec-21 05:20:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 05:20:00 LOG4 got_cormsg: From DATATAKING: DONE 2008-Dec-21 05:20:00 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Dec-21 05:20:00 LOG5 end_task: Level: (4) ID = <10166> Status = 0 0 0 0 ok 2008-Dec-21 05:20:00 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Dec-21 05:20:00 START begin_task: Starting task 'adjusting WAPP power' 2008-Dec-21 05:20:00 LOG5 begin_task: Level: (4) ID = <10167> Status = 0 0 0 0 ok 2008-Dec-21 05:20:00 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Dec-21 05:20:00 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Dec-21 05:20:00 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Dec-21 05:20:00 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Dec-21 05:20:00 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Dec-21 05:20:00 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Dec-21 05:20:00 LOG5 begin_task: Level: (5) ID = <10168> Status = 0 0 0 0 ok 2008-Dec-21 05:20:00 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Dec-21 05:20:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 05:20:01 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 7 0 dB 2008-Dec-21 05:20:01 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 7 4 dB --- beam 3: 4 3 dB 2008-Dec-21 05:20:01 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 1 dB --- beam 5: 6 5 dB 2008-Dec-21 05:20:01 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 3 dB --- beam 7: 2 3 dB 2008-Dec-21 05:20:01 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Dec-21 05:20:01 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Dec-21 05:20:01 LOG5 end_task: Level: (5) ID = <10168> Status = 0 0 0 0 ok 2008-Dec-21 05:20:01 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.952 0.968 ALFA beam 1: 0.944 0.111 2008-Dec-21 05:20:01 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.908 1.065 ALFA beam 3: 0.942 0.920 2008-Dec-21 05:20:01 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.926 0.930 ALFA beam 5: 0.887 0.996 2008-Dec-21 05:20:01 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.970 0.951 ALFA beam 7: 1.068 1.049 2008-Dec-21 05:20:01 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Dec-21 05:20:01 LOG5 finish_task: Level: (4) ID = <10167> Status = 0 0 0 0 ok 2008-Dec-21 05:20:01 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Dec-21 05:20:01 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-21 05:20:01 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Dec-21 05:20:01 LOG5 end_task: Level: (4) ID = <10167> Status = 0 0 0 0 ok 2008-Dec-21 05:20:01 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Dec-21 05:20:01 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Dec-21 05:20:01 LOG5 finish_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2008-Dec-21 05:20:01 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Dec-21 05:20:01 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-21 05:20:01 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Dec-21 05:20:01 LOG5 end_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2008-Dec-21 05:20:01 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 SS 2008-Dec-21 05:20:01 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 SS 2008-Dec-21 05:20:01 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 SS 2008-Dec-21 05:20:01 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 SS 2008-Dec-21 05:20:01 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Dec-21 05:20:01 START begin_task: Starting task 'WAPP calibration' 2008-Dec-21 05:20:01 LOG5 begin_task: Level: (3) ID = <10169> Status = 0 0 0 0 ok 2008-Dec-21 05:20:01 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Dec-21 05:20:01 START begin_task: Starting task 'selecting calibration type' 2008-Dec-21 05:20:01 LOG5 begin_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2008-Dec-21 05:20:01 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Dec-21 05:20:01 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Dec-21 05:20:01 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Dec-21 05:20:01 START begin_task: Starting task 'waiting on setcal' 2008-Dec-21 05:20:01 LOG5 begin_task: Level: (5) ID = <10171> Status = 0 0 0 0 ok 2008-Dec-21 05:20:01 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 SS' 2008-Dec-21 05:20:01 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Dec-21 05:20:01 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Dec-21 05:20:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 05:20:02 LOG4 got_cormsg: From DATATAKING: DONE 2008-Dec-21 05:20:02 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Dec-21 05:20:02 LOG5 end_task: Level: (5) ID = <10171> Status = 0 0 0 0 ok 2008-Dec-21 05:20:02 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Dec-21 05:20:02 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Dec-21 05:20:02 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Dec-21 05:20:02 START begin_task: Starting task 'waiting on command to ALFA' 2008-Dec-21 05:20:02 LOG5 begin_task: Level: (5) ID = <10172> Status = 0 0 0 0 ok 2008-Dec-21 05:20:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 05:20:02 NOTE WAPPDATA-new_file: New FITS file: wapp.20081221.a2048.0004.fits 2008-Dec-21 05:20:02 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081221.a2048.0004.fits} 2008-Dec-21 05:20:02 LOG4 got_alfamon: From ALFAMON: ACK 2008-Dec-21 05:20:02 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Dec-21 05:20:02 LOG5 end_task: Level: (5) ID = <10172> Status = 0 0 0 0 ok 2008-Dec-21 05:20:02 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Dec-21 05:20:02 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Dec-21 05:20:02 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Dec-21 05:20:02 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Dec-21 05:20:02 START begin_task: Starting task 'waiting on command to ALFA' 2008-Dec-21 05:20:02 LOG5 begin_task: Level: (5) ID = <10173> Status = 0 0 0 0 ok 2008-Dec-21 05:20:02 LOG4 got_alfamon: From ALFAMON: ACK 2008-Dec-21 05:20:02 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Dec-21 05:20:02 LOG5 end_task: Level: (5) ID = <10173> Status = 0 0 0 0 ok 2008-Dec-21 05:20:02 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Dec-21 05:20:02 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Dec-21 05:20:02 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Dec-21 05:20:02 LOG5 end_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2008-Dec-21 05:20:02 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Dec-21 05:20:02 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Dec-21 05:20:02 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Dec-21 05:20:02 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Dec-21 05:20:02 LOG5 begin_task: Level: (4) ID = <10174> Status = 0 0 0 0 ok 2008-Dec-21 05:20:02 LOG3 CALCONTROL-caltrig: Software trigger 2008-Dec-21 05:20:02 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Dec-21 05:20:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2008-Dec-21 05:20:02 LOG4 check_wapp_levels: WAPP-1 power levels: 0.952 0.968 0.944 0.111 2008-Dec-21 05:20:02 LOG4 check_wapp_levels: WAPP-2 power levels: 0.908 1.065 0.942 0.920 2008-Dec-21 05:20:02 LOG4 check_wapp_levels: WAPP-3 power levels: 0.926 0.930 0.887 0.996 2008-Dec-21 05:20:02 LOG4 check_wapp_levels: WAPP-4 power levels: 0.970 0.951 1.068 1.049 2008-Dec-21 05:20:02 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Dec-21 05:20:02 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Dec-21 05:20:02 LOG5 end_task: Level: (4) ID = <10174> Status = 0 0 0 0 ok 2008-Dec-21 05:20:02 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Dec-21 05:20:02 LOG4 take_data: Calling 'take_data 5 5 CAL ON -' 2008-Dec-21 05:20:02 START begin_task: Starting task 'WAPP spectral observation' 2008-Dec-21 05:20:02 LOG5 begin_task: Level: (4) ID = <10175> Status = 0 0 0 0 ok 2008-Dec-21 05:20:02 LOG5 log_alfabeam: Parameters: 9.8768055555555563 23.805916666666665 10.904710 2008.9752833548812 88.399979 2008-Dec-21 05:20:02 LOG4 log_alfabeam: ALFABEAM 0 9.876805555555558 23.805916666666654 2008-Dec-21 05:20:02 LOG4 log_alfabeam: ALFABEAM 1 9.878961807096507 23.714883672792340 2008-Dec-21 05:20:02 LOG4 log_alfabeam: ALFABEAM 2 9.884256035391433 23.775610827608297 2008-Dec-21 05:20:02 LOG4 log_alfabeam: ALFABEAM 3 9.882130982253477 23.866570854942388 2008-Dec-21 05:20:02 LOG4 log_alfabeam: ALFABEAM 4 9.874685656235043 23.897354455892934 2008-Dec-21 05:20:02 LOG4 log_alfabeam: ALFABEAM 5 9.869350854852684 23.836108662709798 2008-Dec-21 05:20:02 LOG4 log_alfabeam: ALFABEAM 6 9.871502163294130 23.744597492622898 2008-Dec-21 05:20:02 INFO2 take_data: Starting WAPP scan: 835600100 2008-Dec-21 05:20:03 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Dec-21 05:20:03 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Dec-21 05:20:03 LOG5 begin_task: Level: (5) ID = <10176> Status = 0 0 0 0 ok 2008-Dec-21 05:20:03 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Dec-21 05:20:03 INFO1 WAPP=1+2+3+4-start_spectra: start sec 33604.00 2008-Dec-21 05:20:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.351553 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Dec-21 05:20:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.351553 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-21 05:20:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.351553 MHz Flip = 1 Band = 0 Mixer = 1009.160893 MHz 2008-Dec-21 05:20:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.351553 MHz Flip = 1 Band = 0 Mixer = 1056.430758 MHz 2008-Dec-21 05:20:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.351553 MHz Flip = 1 Band = 0 Mixer = 963.569070 MHz 2008-Dec-21 05:20:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.351553 MHz Flip = 1 Band = 0 Mixer = 1170.000000 MHz 2008-Dec-21 05:20:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.351553 MHz Flip = 1 Band = 0 Mixer = 970.000000 MHz 2008-Dec-21 05:20:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.351553 MHz Flip = 1 Band = 0 Mixer = 1066.000000 MHz 2008-Dec-21 05:20:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.351553 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2008-Dec-21 05:20:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Dec-21 05:20:09 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Dec-21 05:20:09 LOG5 end_task: Level: (5) ID = <10176> Status = 0 0 0 0 ok 2008-Dec-21 05:20:09 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Dec-21 05:20:09 LOG5 end_task: Level: (4) ID = <10175> Status = 0 0 0 0 ok 2008-Dec-21 05:20:09 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Dec-21 05:20:09 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Dec-21 05:20:09 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Dec-21 05:20:09 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Dec-21 05:20:09 LOG5 begin_task: Level: (4) ID = <10177> Status = 0 0 0 0 ok 2008-Dec-21 05:20:09 LOG3 CALCONTROL-caltrig: Software trigger 2008-Dec-21 05:20:09 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Dec-21 05:20:09 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Dec-21 05:20:09 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Dec-21 05:20:09 LOG5 end_task: Level: (4) ID = <10177> Status = 0 0 0 0 ok 2008-Dec-21 05:20:09 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Dec-21 05:20:09 LOG4 take_data: Calling 'take_data 5 5 CAL OFF -' 2008-Dec-21 05:20:09 START begin_task: Starting task 'WAPP spectral observation' 2008-Dec-21 05:20:09 LOG5 begin_task: Level: (4) ID = <10178> Status = 0 0 0 0 ok 2008-Dec-21 05:20:09 LOG5 log_alfabeam: Parameters: 9.8768055555555563 23.805916666666665 10.906659 2008.9752835766978 88.399979 2008-Dec-21 05:20:09 LOG4 log_alfabeam: ALFABEAM 0 9.876805555555560 23.805916666666658 2008-Dec-21 05:20:09 LOG4 log_alfabeam: ALFABEAM 1 9.878966613709721 23.714904947910060 2008-Dec-21 05:20:09 LOG4 log_alfabeam: ALFABEAM 2 9.884257648652316 23.775685542805274 2008-Dec-21 05:20:09 LOG4 log_alfabeam: ALFABEAM 3 9.882127737774823 23.866624762913787 2008-Dec-21 05:20:09 LOG4 log_alfabeam: ALFABEAM 4 9.874680752814893 23.897332824820705 2008-Dec-21 05:20:09 LOG4 log_alfabeam: ALFABEAM 5 9.869349252498074 23.836033963494881 2008-Dec-21 05:20:09 LOG4 log_alfabeam: ALFABEAM 6 9.871505412421087 23.744544896667179 2008-Dec-21 05:20:09 INFO2 take_data: Starting WAPP scan: 835600101 2008-Dec-21 05:20:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Dec-21 05:20:10 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Dec-21 05:20:10 LOG5 begin_task: Level: (5) ID = <10179> Status = 0 0 0 0 ok 2008-Dec-21 05:20:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Dec-21 05:20:10 INFO5 check_wapp_levels: WAPP power levels are between 0.117 and 1.502 (still bad) 2008-Dec-21 05:20:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 33611.00 2008-Dec-21 05:20:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.351553 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Dec-21 05:20:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.351553 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-21 05:20:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.351553 MHz Flip = 1 Band = 0 Mixer = 1009.160893 MHz 2008-Dec-21 05:20:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.351553 MHz Flip = 1 Band = 0 Mixer = 1056.430758 MHz 2008-Dec-21 05:20:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.351553 MHz Flip = 1 Band = 0 Mixer = 963.569070 MHz 2008-Dec-21 05:20:16 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.502 (still bad) 2008-Dec-21 05:20:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.351553 MHz Flip = 1 Band = 0 Mixer = 1170.000000 MHz 2008-Dec-21 05:20:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.351553 MHz Flip = 1 Band = 0 Mixer = 970.000000 MHz 2008-Dec-21 05:20:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.351553 MHz Flip = 1 Band = 0 Mixer = 1066.000000 MHz 2008-Dec-21 05:20:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.351553 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2008-Dec-21 05:20:16 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Dec-21 05:20:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Dec-21 05:20:16 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Dec-21 05:20:16 LOG5 end_task: Level: (5) ID = <10179> Status = 0 0 0 0 ok 2008-Dec-21 05:20:16 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Dec-21 05:20:16 LOG5 end_task: Level: (4) ID = <10178> Status = 0 0 0 0 ok 2008-Dec-21 05:20:16 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Dec-21 05:20:16 STOP finish_task: Finishing task 'WAPP calibration' 2008-Dec-21 05:20:16 LOG5 finish_task: Level: (3) ID = <10169> Status = 0 0 0 0 ok 2008-Dec-21 05:20:16 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Dec-21 05:20:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-21 05:20:16 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Dec-21 05:20:16 LOG5 end_task: Level: (3) ID = <10169> Status = 0 0 0 0 ok 2008-Dec-21 05:20:16 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Dec-21 05:20:16 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 113.45 and ZA = 15.21 2008-Dec-21 05:20:16 LOG3 track_source: Calling 'track_source AGES3193_p2_004 113.45 15.2127731863 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Dec-21 05:20:16 START begin_task: Starting task 'sending tracking commands' 2008-Dec-21 05:20:16 LOG5 begin_task: Level: (3) ID = <10180> Status = 0 0 0 0 ok 2008-Dec-21 05:20:16 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_004} INFO {Slewing to source 'AGES3193_p2_004' ...} 2008-Dec-21 05:20:16 INFO1 track_source: Starting to track AGES3193_p2_004 2008-Dec-21 05:20:16 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_004" 2008-Dec-21 05:20:16 LOG3 vw_send: To DATATAKING: set ra 113.45 2008-Dec-21 05:20:16 LOG3 vw_send: To DATATAKING: set dec 15.2127731863 2008-Dec-21 05:20:16 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Dec-21 05:20:16 LOG3 vw_send: To DATATAKING: pnt tr 113.45 15.2127731863 -CF 2008-Dec-21 05:20:16 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Dec-21 05:20:16 STOP finish_task: Finishing task 'sending tracking commands' 2008-Dec-21 05:20:16 LOG5 finish_task: Level: (3) ID = <10180> Status = 0 0 0 0 ok 2008-Dec-21 05:20:16 INFO2 finish_task: DONE finished sending: tracking commands 2008-Dec-21 05:20:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-21 05:20:17 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Dec-21 05:20:17 LOG5 end_task: Level: (3) ID = <10180> Status = 0 0 0 0 ok 2008-Dec-21 05:20:17 LOG1 fixed_driftmap: Parameters: HA = +01:01:00.0 Start = 10:54:32.2 LST = 10:54:31.0 diff = 1.2 secs 2008-Dec-21 05:20:17 INFO2 fixed_driftmap: Waiting -0.8 seconds for RA 9:53:32 2008-Dec-21 05:20:17 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Dec-21 05:20:17 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Dec-21 05:20:17 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Dec-21 05:20:17 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Dec-21 05:20:17 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ -' 2008-Dec-21 05:20:17 START begin_task: Starting task 'WAPP spectral observation' 2008-Dec-21 05:20:17 LOG5 begin_task: Level: (3) ID = <10181> Status = 0 0 0 0 ok 2008-Dec-21 05:20:17 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Dec-21 05:20:17 INFO2 take_data: Starting WAPP scan: 835600102 2008-Dec-21 05:20:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Dec-21 05:20:17 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Dec-21 05:20:17 LOG5 begin_task: Level: (4) ID = <10182> Status = 0 0 0 0 ok 2008-Dec-21 05:20:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Dec-21 05:20:17 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_004" 2008-Dec-21 05:20:17 LOG4 got_cormsg: From DATATAKING: set ra 113.45 2008-Dec-21 05:20:17 LOG4 got_cormsg: From DATATAKING: set dec 15.2127731863 2008-Dec-21 05:20:17 LOG4 got_cormsg: From DATATAKING: vw% 113.45 2008-Dec-21 05:20:17 LOG4 got_cormsg: From DATATAKING: vw% 15.2127731863 2008-Dec-21 05:20:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 05:20:17 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Dec-21 05:20:17 LOG4 got_cormsg: From DATATAKING: pnt tr 113.45 15.2127731863 -CF 2008-Dec-21 05:20:17 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Dec-21 05:20:17 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Dec-21 05:20:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 05:20:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 33618.00 2008-Dec-21 05:20:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.351553 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Dec-21 05:20:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.351553 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-21 05:20:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.351553 MHz Flip = 1 Band = 0 Mixer = 1009.160893 MHz 2008-Dec-21 05:20:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.351553 MHz Flip = 1 Band = 0 Mixer = 1056.430758 MHz 2008-Dec-21 05:20:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.351553 MHz Flip = 1 Band = 0 Mixer = 963.569070 MHz 2008-Dec-21 05:20:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.351553 MHz Flip = 1 Band = 0 Mixer = 1170.000000 MHz 2008-Dec-21 05:20:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.351553 MHz Flip = 1 Band = 0 Mixer = 970.000000 MHz 2008-Dec-21 05:20:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.351553 MHz Flip = 1 Band = 0 Mixer = 1066.000000 MHz 2008-Dec-21 05:20:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.351553 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2008-Dec-21 05:20:21 WARNING WAPP=1+2+3+4-start_spectra: WARNING observing when not on source 2008-Dec-21 05:20:22 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.076 (still bad) 2008-Dec-21 05:20:24 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.070 (still bad) 2008-Dec-21 05:20:26 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.071 (still bad) 2008-Dec-21 05:20:28 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.070 (still bad) 2008-Dec-21 05:20:29 NOTE WAPP=1+2+3+4-start_spectra: Observing now on source 2008-Dec-21 05:20:30 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.071 (still bad) 2008-Dec-21 05:20:32 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.075 (still bad) 2008-Dec-21 05:20:34 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.072 (still bad) 2008-Dec-21 05:20:36 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.071 (still bad) 2008-Dec-21 05:20:38 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.070 (still bad) 2008-Dec-21 05:20:40 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.068 (still bad) 2008-Dec-21 05:20:42 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.066 (still bad) 2008-Dec-21 05:20:44 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.070 (still bad) 2008-Dec-21 05:20:46 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.073 (still bad) 2008-Dec-21 05:20:48 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.065 (still bad) 2008-Dec-21 05:20:50 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.066 (still bad) 2008-Dec-21 05:20:52 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.069 (still bad) 2008-Dec-21 05:20:54 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.067 (still bad) 2008-Dec-21 05:20:56 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.068 (still bad) 2008-Dec-21 05:20:58 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.073 (still bad) 2008-Dec-21 05:21:00 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.067 (still bad) 2008-Dec-21 05:21:02 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.068 (still bad) 2008-Dec-21 05:21:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2008-Dec-21 05:21:04 LOG4 check_wapp_levels: WAPP-1 power levels: 0.952 0.968 0.944 0.110 2008-Dec-21 05:21:04 LOG4 check_wapp_levels: WAPP-2 power levels: 0.909 1.063 0.941 0.916 2008-Dec-21 05:21:04 LOG4 check_wapp_levels: WAPP-3 power levels: 0.919 0.920 0.886 0.993 2008-Dec-21 05:21:04 LOG4 check_wapp_levels: WAPP-4 power levels: 0.971 0.955 1.071 1.053 2008-Dec-21 05:21:06 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.071 (still bad) 2008-Dec-21 05:21:08 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.075 (still bad) 2008-Dec-21 05:21:10 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.084 (still bad) 2008-Dec-21 05:21:12 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.080 (still bad) 2008-Dec-21 05:21:14 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.087 (still bad) 2008-Dec-21 05:21:16 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.087 (still bad) 2008-Dec-21 05:21:18 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.088 (still bad) 2008-Dec-21 05:21:21 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.089 (still bad) 2008-Dec-21 05:21:23 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.086 (still bad) 2008-Dec-21 05:21:25 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.080 (still bad) 2008-Dec-21 05:21:27 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.076 (still bad) 2008-Dec-21 05:21:29 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.070 (still bad) 2008-Dec-21 05:21:31 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.068 (still bad) 2008-Dec-21 05:21:33 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.073 (still bad) 2008-Dec-21 05:21:35 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.066 (still bad) 2008-Dec-21 05:21:37 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.066 (still bad) 2008-Dec-21 05:21:39 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.069 (still bad) 2008-Dec-21 05:21:41 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.067 (still bad) 2008-Dec-21 05:21:43 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.069 (still bad) 2008-Dec-21 05:21:45 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.074 (still bad) 2008-Dec-21 05:21:47 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.068 (still bad) 2008-Dec-21 05:21:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.068 (still bad) 2008-Dec-21 05:21:51 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.070 (still bad) 2008-Dec-21 05:21:53 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.069 (still bad) 2008-Dec-21 05:21:55 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.069 (still bad) 2008-Dec-21 05:21:57 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.076 (still bad) 2008-Dec-21 05:21:59 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.068 (still bad) 2008-Dec-21 05:22:01 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.067 (still bad) 2008-Dec-21 05:22:03 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.070 (still bad) 2008-Dec-21 05:22:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2008-Dec-21 05:22:05 LOG4 check_wapp_levels: WAPP-1 power levels: 0.952 0.972 0.944 0.111 2008-Dec-21 05:22:05 LOG4 check_wapp_levels: WAPP-2 power levels: 0.909 1.062 0.939 0.917 2008-Dec-21 05:22:05 LOG4 check_wapp_levels: WAPP-3 power levels: 0.919 0.918 0.885 0.992 2008-Dec-21 05:22:05 LOG4 check_wapp_levels: WAPP-4 power levels: 0.969 0.950 1.068 1.047 2008-Dec-21 05:22:07 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.068 (still bad) 2008-Dec-21 05:22:09 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.074 (still bad) 2008-Dec-21 05:22:11 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.068 (still bad) 2008-Dec-21 05:22:13 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.067 (still bad) 2008-Dec-21 05:22:15 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.069 (still bad) 2008-Dec-21 05:22:17 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.067 (still bad) 2008-Dec-21 05:22:19 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.068 (still bad) 2008-Dec-21 05:22:21 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.075 (still bad) 2008-Dec-21 05:22:23 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.069 (still bad) 2008-Dec-21 05:22:25 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.068 (still bad) 2008-Dec-21 05:22:27 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.071 (still bad) 2008-Dec-21 05:22:29 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.068 (still bad) 2008-Dec-21 05:22:31 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.070 (still bad) 2008-Dec-21 05:22:33 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.075 (still bad) 2008-Dec-21 05:22:35 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.068 (still bad) 2008-Dec-21 05:22:37 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.068 (still bad) 2008-Dec-21 05:22:39 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.069 (still bad) 2008-Dec-21 05:22:41 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.068 (still bad) 2008-Dec-21 05:22:44 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.068 (still bad) 2008-Dec-21 05:22:46 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.074 (still bad) 2008-Dec-21 05:22:48 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.066 (still bad) 2008-Dec-21 05:22:50 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.065 (still bad) 2008-Dec-21 05:22:52 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.067 (still bad) 2008-Dec-21 05:22:54 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.067 (still bad) 2008-Dec-21 05:22:56 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.069 (still bad) 2008-Dec-21 05:22:58 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.072 (still bad) 2008-Dec-21 05:23:00 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.067 (still bad) 2008-Dec-21 05:23:02 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.069 (still bad) 2008-Dec-21 05:23:04 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.066 (still bad) 2008-Dec-21 05:23:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2008-Dec-21 05:23:06 LOG4 check_wapp_levels: WAPP-1 power levels: 0.951 0.972 0.945 0.111 2008-Dec-21 05:23:06 LOG4 check_wapp_levels: WAPP-2 power levels: 0.909 1.064 0.943 0.916 2008-Dec-21 05:23:06 LOG4 check_wapp_levels: WAPP-3 power levels: 0.919 0.918 0.887 0.992 2008-Dec-21 05:23:06 LOG4 check_wapp_levels: WAPP-4 power levels: 0.967 0.950 1.066 1.048 2008-Dec-21 05:23:08 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.069 (still bad) 2008-Dec-21 05:23:10 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.068 (still bad) 2008-Dec-21 05:23:12 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.067 (still bad) 2008-Dec-21 05:23:14 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.067 (still bad) 2008-Dec-21 05:23:16 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.065 (still bad) 2008-Dec-21 05:23:18 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.067 (still bad) 2008-Dec-21 05:23:20 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.068 (still bad) 2008-Dec-21 05:23:22 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.069 (still bad) 2008-Dec-21 05:23:24 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.067 (still bad) 2008-Dec-21 05:23:26 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.068 (still bad) 2008-Dec-21 05:23:28 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.066 (still bad) 2008-Dec-21 05:23:30 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.067 (still bad) 2008-Dec-21 05:23:32 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.070 (still bad) 2008-Dec-21 05:23:34 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.071 (still bad) 2008-Dec-21 05:23:36 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.066 (still bad) 2008-Dec-21 05:23:38 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.070 (still bad) 2008-Dec-21 05:23:40 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.069 (still bad) 2008-Dec-21 05:23:42 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.067 (still bad) 2008-Dec-21 05:23:44 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.070 (still bad) 2008-Dec-21 05:23:46 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.070 (still bad) 2008-Dec-21 05:23:48 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.069 (still bad) 2008-Dec-21 05:23:50 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.071 (still bad) 2008-Dec-21 05:23:52 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.068 (still bad) 2008-Dec-21 05:23:54 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.068 (still bad) 2008-Dec-21 05:23:56 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.070 (still bad) 2008-Dec-21 05:23:58 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.071 (still bad) 2008-Dec-21 05:24:00 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.069 (still bad) 2008-Dec-21 05:24:02 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.070 (still bad) 2008-Dec-21 05:24:04 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.070 (still bad) 2008-Dec-21 05:24:06 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.069 (still bad) 2008-Dec-21 05:24:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2008-Dec-21 05:24:09 LOG4 check_wapp_levels: WAPP-1 power levels: 0.954 0.973 0.944 0.111 2008-Dec-21 05:24:09 LOG4 check_wapp_levels: WAPP-2 power levels: 0.911 1.066 0.946 0.920 2008-Dec-21 05:24:09 LOG4 check_wapp_levels: WAPP-3 power levels: 0.921 0.924 0.888 0.995 2008-Dec-21 05:24:09 LOG4 check_wapp_levels: WAPP-4 power levels: 0.970 0.952 1.070 1.050 2008-Dec-21 05:24:11 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.071 (still bad) 2008-Dec-21 05:24:13 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.069 (still bad) 2008-Dec-21 05:24:15 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.070 (still bad) 2008-Dec-21 05:24:17 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.069 (still bad) 2008-Dec-21 05:24:19 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.069 (still bad) 2008-Dec-21 05:24:21 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.070 (still bad) 2008-Dec-21 05:24:23 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.071 (still bad) 2008-Dec-21 05:24:25 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.069 (still bad) 2008-Dec-21 05:24:27 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.071 (still bad) 2008-Dec-21 05:24:29 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.070 (still bad) 2008-Dec-21 05:24:31 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.069 (still bad) 2008-Dec-21 05:24:33 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.070 (still bad) 2008-Dec-21 05:24:35 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.069 (still bad) 2008-Dec-21 05:24:37 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.068 (still bad) 2008-Dec-21 05:24:39 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.070 (still bad) 2008-Dec-21 05:24:41 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.069 (still bad) 2008-Dec-21 05:24:43 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.069 (still bad) 2008-Dec-21 05:24:45 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.078 (still bad) 2008-Dec-21 05:24:47 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.070 (still bad) 2008-Dec-21 05:24:49 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.068 (still bad) 2008-Dec-21 05:24:51 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.072 (still bad) 2008-Dec-21 05:24:53 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.068 (still bad) 2008-Dec-21 05:24:55 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.071 (still bad) 2008-Dec-21 05:24:57 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.078 (still bad) 2008-Dec-21 05:24:59 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.072 (still bad) 2008-Dec-21 05:25:01 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.070 (still bad) 2008-Dec-21 05:25:03 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.073 (still bad) 2008-Dec-21 05:25:05 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.070 (still bad) 2008-Dec-21 05:25:07 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.071 (still bad) 2008-Dec-21 05:25:09 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.079 (still bad) 2008-Dec-21 05:25:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2008-Dec-21 05:25:11 LOG4 check_wapp_levels: WAPP-1 power levels: 0.952 0.975 0.947 0.111 2008-Dec-21 05:25:11 LOG4 check_wapp_levels: WAPP-2 power levels: 0.914 1.072 0.945 0.920 2008-Dec-21 05:25:11 LOG4 check_wapp_levels: WAPP-3 power levels: 0.921 0.923 0.890 0.995 2008-Dec-21 05:25:11 LOG4 check_wapp_levels: WAPP-4 power levels: 0.970 0.950 1.070 1.048 2008-Dec-21 05:25:13 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.073 (still bad) 2008-Dec-21 05:25:15 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.074 (still bad) 2008-Dec-21 05:25:17 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.074 (still bad) 2008-Dec-21 05:25:19 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.075 (still bad) 2008-Dec-21 05:25:21 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.082 (still bad) 2008-Dec-21 05:25:23 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.075 (still bad) 2008-Dec-21 05:25:25 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.073 (still bad) 2008-Dec-21 05:25:27 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.072 (still bad) 2008-Dec-21 05:25:29 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.070 (still bad) 2008-Dec-21 05:25:31 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.071 (still bad) 2008-Dec-21 05:25:33 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.080 (still bad) 2008-Dec-21 05:25:36 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.071 (still bad) 2008-Dec-21 05:25:38 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.070 (still bad) 2008-Dec-21 05:25:40 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.072 (still bad) 2008-Dec-21 05:25:42 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.069 (still bad) 2008-Dec-21 05:25:44 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.070 (still bad) 2008-Dec-21 05:25:46 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.079 (still bad) 2008-Dec-21 05:25:48 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.072 (still bad) 2008-Dec-21 05:25:50 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.069 (still bad) 2008-Dec-21 05:25:52 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.072 (still bad) 2008-Dec-21 05:25:54 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.068 (still bad) 2008-Dec-21 05:25:56 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.072 (still bad) 2008-Dec-21 05:25:58 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.080 (still bad) 2008-Dec-21 05:26:00 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.070 (still bad) 2008-Dec-21 05:26:02 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.070 (still bad) 2008-Dec-21 05:26:04 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.072 (still bad) 2008-Dec-21 05:26:06 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.070 (still bad) 2008-Dec-21 05:26:08 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.072 (still bad) 2008-Dec-21 05:26:10 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.078 (still bad) 2008-Dec-21 05:26:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2008-Dec-21 05:26:12 LOG4 check_wapp_levels: WAPP-1 power levels: 0.952 0.974 0.944 0.111 2008-Dec-21 05:26:12 LOG4 check_wapp_levels: WAPP-2 power levels: 0.912 1.071 0.944 0.918 2008-Dec-21 05:26:12 LOG4 check_wapp_levels: WAPP-3 power levels: 0.920 0.920 0.898 1.003 2008-Dec-21 05:26:12 LOG4 check_wapp_levels: WAPP-4 power levels: 0.970 0.951 1.069 1.050 2008-Dec-21 05:26:14 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.070 (still bad) 2008-Dec-21 05:26:16 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.071 (still bad) 2008-Dec-21 05:26:18 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.070 (still bad) 2008-Dec-21 05:26:20 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.070 (still bad) 2008-Dec-21 05:26:22 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.077 (still bad) 2008-Dec-21 05:26:24 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.069 (still bad) 2008-Dec-21 05:26:26 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.070 (still bad) 2008-Dec-21 05:26:28 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.070 (still bad) 2008-Dec-21 05:26:30 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.069 (still bad) 2008-Dec-21 05:26:32 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.070 (still bad) 2008-Dec-21 05:26:34 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.070 (still bad) 2008-Dec-21 05:26:36 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.070 (still bad) 2008-Dec-21 05:26:38 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.069 (still bad) 2008-Dec-21 05:26:40 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.069 (still bad) 2008-Dec-21 05:26:42 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.068 (still bad) 2008-Dec-21 05:26:44 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.069 (still bad) 2008-Dec-21 05:26:46 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.071 (still bad) 2008-Dec-21 05:26:48 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.068 (still bad) 2008-Dec-21 05:26:50 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.068 (still bad) 2008-Dec-21 05:26:52 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.069 (still bad) 2008-Dec-21 05:26:54 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.068 (still bad) 2008-Dec-21 05:26:56 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.070 (still bad) 2008-Dec-21 05:26:58 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.072 (still bad) 2008-Dec-21 05:27:00 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.070 (still bad) 2008-Dec-21 05:27:03 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.070 (still bad) 2008-Dec-21 05:27:05 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.071 (still bad) 2008-Dec-21 05:27:07 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.070 (still bad) 2008-Dec-21 05:27:09 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.071 (still bad) 2008-Dec-21 05:27:11 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.072 (still bad) 2008-Dec-21 05:27:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2008-Dec-21 05:27:13 LOG4 check_wapp_levels: WAPP-1 power levels: 0.950 0.974 0.948 0.111 2008-Dec-21 05:27:13 LOG4 check_wapp_levels: WAPP-2 power levels: 0.912 1.068 0.944 0.918 2008-Dec-21 05:27:13 LOG4 check_wapp_levels: WAPP-3 power levels: 0.922 0.921 0.889 0.995 2008-Dec-21 05:27:13 LOG4 check_wapp_levels: WAPP-4 power levels: 0.971 0.950 1.071 1.049 2008-Dec-21 05:27:15 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.070 (still bad) 2008-Dec-21 05:27:17 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.071 (still bad) 2008-Dec-21 05:27:19 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.069 (still bad) 2008-Dec-21 05:27:21 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.072 (still bad) 2008-Dec-21 05:27:23 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.072 (still bad) 2008-Dec-21 05:27:25 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.070 (still bad) 2008-Dec-21 05:27:27 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.069 (still bad) 2008-Dec-21 05:27:29 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.071 (still bad) 2008-Dec-21 05:27:31 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.069 (still bad) 2008-Dec-21 05:27:33 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.070 (still bad) 2008-Dec-21 05:27:35 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.073 (still bad) 2008-Dec-21 05:27:37 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.069 (still bad) 2008-Dec-21 05:27:39 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.070 (still bad) 2008-Dec-21 05:27:41 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.071 (still bad) 2008-Dec-21 05:27:43 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.070 (still bad) 2008-Dec-21 05:27:45 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.071 (still bad) 2008-Dec-21 05:27:47 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.074 (still bad) 2008-Dec-21 05:27:49 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.071 (still bad) 2008-Dec-21 05:27:51 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.071 (still bad) 2008-Dec-21 05:27:53 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.074 (still bad) 2008-Dec-21 05:27:55 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.071 (still bad) 2008-Dec-21 05:27:57 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.078 (still bad) 2008-Dec-21 05:27:59 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.071 (still bad) 2008-Dec-21 05:28:01 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.070 (still bad) 2008-Dec-21 05:28:03 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.072 (still bad) 2008-Dec-21 05:28:05 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.069 (still bad) 2008-Dec-21 05:28:07 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.070 (still bad) 2008-Dec-21 05:28:09 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.079 (still bad) 2008-Dec-21 05:28:11 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.071 (still bad) 2008-Dec-21 05:28:13 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.070 (still bad) 2008-Dec-21 05:28:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.112 < 0.75)! 2008-Dec-21 05:28:15 LOG4 check_wapp_levels: WAPP-1 power levels: 0.949 0.977 0.951 0.112 2008-Dec-21 05:28:15 LOG4 check_wapp_levels: WAPP-2 power levels: 0.917 1.070 0.949 0.923 2008-Dec-21 05:28:15 LOG4 check_wapp_levels: WAPP-3 power levels: 0.923 0.924 0.892 0.998 2008-Dec-21 05:28:15 LOG4 check_wapp_levels: WAPP-4 power levels: 0.972 0.953 1.073 1.051 2008-Dec-21 05:28:17 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.070 (still bad) 2008-Dec-21 05:28:19 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.071 (still bad) 2008-Dec-21 05:28:21 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.078 (still bad) 2008-Dec-21 05:28:23 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.073 (still bad) 2008-Dec-21 05:28:25 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.072 (still bad) 2008-Dec-21 05:28:27 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.074 (still bad) 2008-Dec-21 05:28:30 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.072 (still bad) 2008-Dec-21 05:28:32 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.073 (still bad) 2008-Dec-21 05:28:34 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.077 (still bad) 2008-Dec-21 05:28:36 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.074 (still bad) 2008-Dec-21 05:28:38 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.073 (still bad) 2008-Dec-21 05:28:40 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.074 (still bad) 2008-Dec-21 05:28:42 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.073 (still bad) 2008-Dec-21 05:28:44 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.076 (still bad) 2008-Dec-21 05:28:46 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.081 (still bad) 2008-Dec-21 05:28:48 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 05:28:48.299 (seconds: 19728.299)!} 2008-Dec-21 05:28:48 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 05:28:48.299 (seconds: 19728.299)! 2008-Dec-21 05:28:48 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.077 (still bad) 2008-Dec-21 05:28:49 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 19727.0 to 19728.0! 2008-Dec-21 05:28:50 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (19727.0 - 19729.0)! 2008-Dec-21 05:28:50 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.077 (still bad) 2008-Dec-21 05:28:52 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.078 (still bad) 2008-Dec-21 05:28:54 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.076 (still bad) 2008-Dec-21 05:28:56 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.075 (still bad) 2008-Dec-21 05:28:58 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.079 (still bad) 2008-Dec-21 05:29:00 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.074 (still bad) 2008-Dec-21 05:29:02 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.072 (still bad) 2008-Dec-21 05:29:04 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.073 (still bad) 2008-Dec-21 05:29:06 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.071 (still bad) 2008-Dec-21 05:29:08 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.072 (still bad) 2008-Dec-21 05:29:10 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.076 (still bad) 2008-Dec-21 05:29:12 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.073 (still bad) 2008-Dec-21 05:29:14 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.072 (still bad) 2008-Dec-21 05:29:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.112 < 0.75)! 2008-Dec-21 05:29:16 LOG4 check_wapp_levels: WAPP-1 power levels: 0.948 0.978 0.948 0.112 2008-Dec-21 05:29:16 LOG4 check_wapp_levels: WAPP-2 power levels: 0.916 1.072 0.946 0.922 2008-Dec-21 05:29:16 LOG4 check_wapp_levels: WAPP-3 power levels: 0.923 0.920 0.889 0.996 2008-Dec-21 05:29:16 LOG4 check_wapp_levels: WAPP-4 power levels: 0.973 0.955 1.073 1.053 2008-Dec-21 05:29:18 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.072 (still bad) 2008-Dec-21 05:29:20 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.071 (still bad) 2008-Dec-21 05:29:22 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.076 (still bad) 2008-Dec-21 05:29:24 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.074 (still bad) 2008-Dec-21 05:29:26 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.073 (still bad) 2008-Dec-21 05:29:28 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.074 (still bad) 2008-Dec-21 05:29:30 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.073 (still bad) 2008-Dec-21 05:29:32 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.074 (still bad) 2008-Dec-21 05:29:34 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.080 (still bad) 2008-Dec-21 05:29:36 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.073 (still bad) 2008-Dec-21 05:29:38 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.073 (still bad) 2008-Dec-21 05:29:40 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.075 (still bad) 2008-Dec-21 05:29:42 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.072 (still bad) 2008-Dec-21 05:29:44 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.073 (still bad) 2008-Dec-21 05:29:46 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.078 (still bad) 2008-Dec-21 05:29:48 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.073 (still bad) 2008-Dec-21 05:29:51 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.073 (still bad) 2008-Dec-21 05:29:53 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.073 (still bad) 2008-Dec-21 05:29:55 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.071 (still bad) 2008-Dec-21 05:29:57 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.073 (still bad) 2008-Dec-21 05:29:59 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.073 (still bad) 2008-Dec-21 05:30:01 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.072 (still bad) 2008-Dec-21 05:30:03 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.072 (still bad) 2008-Dec-21 05:30:05 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.072 (still bad) 2008-Dec-21 05:30:07 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.072 (still bad) 2008-Dec-21 05:30:09 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.074 (still bad) 2008-Dec-21 05:30:11 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.074 (still bad) 2008-Dec-21 05:30:13 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.072 (still bad) 2008-Dec-21 05:30:15 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.072 (still bad) 2008-Dec-21 05:30:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2008-Dec-21 05:30:17 LOG4 check_wapp_levels: WAPP-1 power levels: 0.947 0.975 0.947 0.111 2008-Dec-21 05:30:17 LOG4 check_wapp_levels: WAPP-2 power levels: 0.914 1.066 0.945 0.919 2008-Dec-21 05:30:17 LOG4 check_wapp_levels: WAPP-3 power levels: 0.925 0.926 0.899 1.006 2008-Dec-21 05:30:17 LOG4 check_wapp_levels: WAPP-4 power levels: 0.971 0.952 1.072 1.049 2008-Dec-21 05:30:19 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.072 (still bad) 2008-Dec-21 05:30:21 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.073 (still bad) 2008-Dec-21 05:30:23 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.073 (still bad) 2008-Dec-21 05:30:25 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.072 (still bad) 2008-Dec-21 05:30:27 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.074 (still bad) 2008-Dec-21 05:30:29 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.073 (still bad) 2008-Dec-21 05:30:31 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.071 (still bad) 2008-Dec-21 05:30:33 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.076 (still bad) 2008-Dec-21 05:30:35 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.076 (still bad) 2008-Dec-21 05:30:37 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.075 (still bad) 2008-Dec-21 05:30:39 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.076 (still bad) 2008-Dec-21 05:30:41 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.076 (still bad) 2008-Dec-21 05:30:43 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.076 (still bad) 2008-Dec-21 05:30:45 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.079 (still bad) 2008-Dec-21 05:30:47 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.079 (still bad) 2008-Dec-21 05:30:49 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.076 (still bad) 2008-Dec-21 05:30:51 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.074 (still bad) 2008-Dec-21 05:30:53 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.073 (still bad) 2008-Dec-21 05:30:55 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.074 (still bad) 2008-Dec-21 05:30:57 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.074 (still bad) 2008-Dec-21 05:30:59 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.074 (still bad) 2008-Dec-21 05:31:01 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.071 (still bad) 2008-Dec-21 05:31:03 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.074 (still bad) 2008-Dec-21 05:31:06 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.072 (still bad) 2008-Dec-21 05:31:08 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.071 (still bad) 2008-Dec-21 05:31:10 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.073 (still bad) 2008-Dec-21 05:31:12 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.073 (still bad) 2008-Dec-21 05:31:14 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.071 (still bad) 2008-Dec-21 05:31:16 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.073 (still bad) 2008-Dec-21 05:31:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2008-Dec-21 05:31:18 LOG4 check_wapp_levels: WAPP-1 power levels: 0.946 0.975 0.944 0.111 2008-Dec-21 05:31:18 LOG4 check_wapp_levels: WAPP-2 power levels: 0.923 1.074 0.946 0.921 2008-Dec-21 05:31:18 LOG4 check_wapp_levels: WAPP-3 power levels: 0.918 0.918 0.891 0.996 2008-Dec-21 05:31:18 LOG4 check_wapp_levels: WAPP-4 power levels: 0.971 0.953 1.070 1.048 2008-Dec-21 05:31:20 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.081 (still bad) 2008-Dec-21 05:31:22 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.087 (still bad) 2008-Dec-21 05:31:24 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.092 (still bad) 2008-Dec-21 05:31:26 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.092 (still bad) 2008-Dec-21 05:31:28 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.096 (still bad) 2008-Dec-21 05:31:30 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.092 (still bad) 2008-Dec-21 05:31:32 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.090 (still bad) 2008-Dec-21 05:31:34 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.090 (still bad) 2008-Dec-21 05:31:36 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.078 (still bad) 2008-Dec-21 05:31:38 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.073 (still bad) 2008-Dec-21 05:31:40 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.075 (still bad) 2008-Dec-21 05:31:42 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.073 (still bad) 2008-Dec-21 05:31:44 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.074 (still bad) 2008-Dec-21 05:31:46 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.078 (still bad) 2008-Dec-21 05:31:48 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.073 (still bad) 2008-Dec-21 05:31:50 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.074 (still bad) 2008-Dec-21 05:31:52 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.076 (still bad) 2008-Dec-21 05:31:54 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.073 (still bad) 2008-Dec-21 05:31:56 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.073 (still bad) 2008-Dec-21 05:31:58 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.080 (still bad) 2008-Dec-21 05:32:00 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.075 (still bad) 2008-Dec-21 05:32:02 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.073 (still bad) 2008-Dec-21 05:32:04 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.078 (still bad) 2008-Dec-21 05:32:06 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.076 (still bad) 2008-Dec-21 05:32:08 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.078 (still bad) 2008-Dec-21 05:32:10 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.085 (still bad) 2008-Dec-21 05:32:12 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.076 (still bad) 2008-Dec-21 05:32:14 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.076 (still bad) 2008-Dec-21 05:32:16 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.079 (still bad) 2008-Dec-21 05:32:18 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.076 (still bad) 2008-Dec-21 05:32:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2008-Dec-21 05:32:20 LOG4 check_wapp_levels: WAPP-1 power levels: 0.948 0.980 0.951 0.111 2008-Dec-21 05:32:20 LOG4 check_wapp_levels: WAPP-2 power levels: 0.913 1.065 0.952 0.926 2008-Dec-21 05:32:20 LOG4 check_wapp_levels: WAPP-3 power levels: 0.916 0.919 0.898 1.006 2008-Dec-21 05:32:20 LOG4 check_wapp_levels: WAPP-4 power levels: 0.974 0.953 1.076 1.052 2008-Dec-21 05:32:22 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.081 (still bad) 2008-Dec-21 05:32:24 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.076 (still bad) 2008-Dec-21 05:32:26 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.077 (still bad) 2008-Dec-21 05:32:28 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.082 (still bad) 2008-Dec-21 05:32:30 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.081 (still bad) 2008-Dec-21 05:32:33 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.083 (still bad) 2008-Dec-21 05:32:35 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.092 (still bad) 2008-Dec-21 05:32:37 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.085 (still bad) 2008-Dec-21 05:32:39 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.084 (still bad) 2008-Dec-21 05:32:41 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.086 (still bad) 2008-Dec-21 05:32:43 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.082 (still bad) 2008-Dec-21 05:32:45 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.080 (still bad) 2008-Dec-21 05:32:47 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.085 (still bad) 2008-Dec-21 05:32:49 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.076 (still bad) 2008-Dec-21 05:32:51 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.076 (still bad) 2008-Dec-21 05:32:53 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.077 (still bad) 2008-Dec-21 05:32:55 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.074 (still bad) 2008-Dec-21 05:32:57 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.077 (still bad) 2008-Dec-21 05:32:59 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.077 (still bad) 2008-Dec-21 05:33:01 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.077 (still bad) 2008-Dec-21 05:33:03 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.076 (still bad) 2008-Dec-21 05:33:05 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.075 (still bad) 2008-Dec-21 05:33:07 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.075 (still bad) 2008-Dec-21 05:33:09 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.077 (still bad) 2008-Dec-21 05:33:11 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.077 (still bad) 2008-Dec-21 05:33:13 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.078 (still bad) 2008-Dec-21 05:33:15 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.077 (still bad) 2008-Dec-21 05:33:17 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.077 (still bad) 2008-Dec-21 05:33:19 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.077 (still bad) 2008-Dec-21 05:33:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2008-Dec-21 05:33:21 LOG4 check_wapp_levels: WAPP-1 power levels: 0.954 0.982 0.951 0.111 2008-Dec-21 05:33:21 LOG4 check_wapp_levels: WAPP-2 power levels: 0.918 1.072 0.947 0.921 2008-Dec-21 05:33:21 LOG4 check_wapp_levels: WAPP-3 power levels: 0.916 0.916 0.894 1.002 2008-Dec-21 05:33:21 LOG4 check_wapp_levels: WAPP-4 power levels: 0.974 0.953 1.078 1.053 2008-Dec-21 05:33:23 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.077 (still bad) 2008-Dec-21 05:33:25 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.075 (still bad) 2008-Dec-21 05:33:27 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.077 (still bad) 2008-Dec-21 05:33:29 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.076 (still bad) 2008-Dec-21 05:33:31 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.075 (still bad) 2008-Dec-21 05:33:33 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.077 (still bad) 2008-Dec-21 05:33:35 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.076 (still bad) 2008-Dec-21 05:33:37 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.074 (still bad) 2008-Dec-21 05:33:39 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.075 (still bad) 2008-Dec-21 05:33:41 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.075 (still bad) 2008-Dec-21 05:33:43 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.076 (still bad) 2008-Dec-21 05:33:45 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.077 (still bad) 2008-Dec-21 05:33:47 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.076 (still bad) 2008-Dec-21 05:33:49 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.075 (still bad) 2008-Dec-21 05:33:51 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.076 (still bad) 2008-Dec-21 05:33:53 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.076 (still bad) 2008-Dec-21 05:33:56 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.076 (still bad) 2008-Dec-21 05:33:58 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.079 (still bad) 2008-Dec-21 05:34:00 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.079 (still bad) 2008-Dec-21 05:34:02 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.078 (still bad) 2008-Dec-21 05:34:04 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.079 (still bad) 2008-Dec-21 05:34:06 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.078 (still bad) 2008-Dec-21 05:34:08 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.077 (still bad) 2008-Dec-21 05:34:10 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.076 (still bad) 2008-Dec-21 05:34:12 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.079 (still bad) 2008-Dec-21 05:34:14 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.076 (still bad) 2008-Dec-21 05:34:16 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.078 (still bad) 2008-Dec-21 05:34:18 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.077 (still bad) 2008-Dec-21 05:34:20 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.076 (still bad) 2008-Dec-21 05:34:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2008-Dec-21 05:34:22 LOG4 check_wapp_levels: WAPP-1 power levels: 0.954 0.981 0.952 0.111 2008-Dec-21 05:34:22 LOG4 check_wapp_levels: WAPP-2 power levels: 0.918 1.065 0.945 0.920 2008-Dec-21 05:34:22 LOG4 check_wapp_levels: WAPP-3 power levels: 0.923 0.926 0.898 1.007 2008-Dec-21 05:34:22 LOG4 check_wapp_levels: WAPP-4 power levels: 0.973 0.954 1.075 1.054 2008-Dec-21 05:34:24 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.076 (still bad) 2008-Dec-21 05:34:26 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.077 (still bad) 2008-Dec-21 05:34:28 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.076 (still bad) 2008-Dec-21 05:34:30 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.076 (still bad) 2008-Dec-21 05:34:32 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.077 (still bad) 2008-Dec-21 05:34:34 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.084 (still bad) 2008-Dec-21 05:34:36 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.076 (still bad) 2008-Dec-21 05:34:38 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.076 (still bad) 2008-Dec-21 05:34:40 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.078 (still bad) 2008-Dec-21 05:34:42 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.075 (still bad) 2008-Dec-21 05:34:44 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.076 (still bad) 2008-Dec-21 05:34:46 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.084 (still bad) 2008-Dec-21 05:34:48 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.075 (still bad) 2008-Dec-21 05:34:50 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.075 (still bad) 2008-Dec-21 05:34:52 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.076 (still bad) 2008-Dec-21 05:34:54 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.075 (still bad) 2008-Dec-21 05:34:56 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.075 (still bad) 2008-Dec-21 05:34:58 INFO5 check_wapp_levels: WAPP power levels are between 0.113 and 1.082 (still bad) 2008-Dec-21 05:35:00 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.075 (still bad) 2008-Dec-21 05:35:02 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.074 (still bad) 2008-Dec-21 05:35:04 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.078 (still bad) 2008-Dec-21 05:35:06 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.075 (still bad) 2008-Dec-21 05:35:08 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.075 (still bad) 2008-Dec-21 05:35:10 INFO5 check_wapp_levels: WAPP power levels are between 0.113 and 1.084 (still bad) 2008-Dec-21 05:35:12 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.076 (still bad) 2008-Dec-21 05:35:14 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.074 (still bad) 2008-Dec-21 05:35:16 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.077 (still bad) 2008-Dec-21 05:35:18 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.074 (still bad) 2008-Dec-21 05:35:21 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.076 (still bad) 2008-Dec-21 05:35:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.112 < 0.75)! 2008-Dec-21 05:35:23 LOG4 check_wapp_levels: WAPP-1 power levels: 0.958 0.985 0.958 0.112 2008-Dec-21 05:35:23 LOG4 check_wapp_levels: WAPP-2 power levels: 0.921 1.078 0.956 0.930 2008-Dec-21 05:35:23 LOG4 check_wapp_levels: WAPP-3 power levels: 0.925 0.925 0.899 1.005 2008-Dec-21 05:35:23 LOG4 check_wapp_levels: WAPP-4 power levels: 0.981 0.960 1.084 1.059 2008-Dec-21 05:35:25 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.077 (still bad) 2008-Dec-21 05:35:27 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.074 (still bad) 2008-Dec-21 05:35:29 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.079 (still bad) 2008-Dec-21 05:35:31 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.076 (still bad) 2008-Dec-21 05:35:33 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.076 (still bad) 2008-Dec-21 05:35:35 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.083 (still bad) 2008-Dec-21 05:35:37 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.076 (still bad) 2008-Dec-21 05:35:39 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.075 (still bad) 2008-Dec-21 05:35:41 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.077 (still bad) 2008-Dec-21 05:35:43 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.074 (still bad) 2008-Dec-21 05:35:45 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.075 (still bad) 2008-Dec-21 05:35:47 INFO5 check_wapp_levels: WAPP power levels are between 0.113 and 1.082 (still bad) 2008-Dec-21 05:35:49 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.075 (still bad) 2008-Dec-21 05:35:51 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.074 (still bad) 2008-Dec-21 05:35:53 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.077 (still bad) 2008-Dec-21 05:35:55 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.073 (still bad) 2008-Dec-21 05:35:57 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.075 (still bad) 2008-Dec-21 05:35:59 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.082 (still bad) 2008-Dec-21 05:36:01 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.077 (still bad) 2008-Dec-21 05:36:03 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.076 (still bad) 2008-Dec-21 05:36:05 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.079 (still bad) 2008-Dec-21 05:36:07 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.077 (still bad) 2008-Dec-21 05:36:09 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.079 (still bad) 2008-Dec-21 05:36:11 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.084 (still bad) 2008-Dec-21 05:36:13 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.080 (still bad) 2008-Dec-21 05:36:15 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.077 (still bad) 2008-Dec-21 05:36:17 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.078 (still bad) 2008-Dec-21 05:36:19 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.078 (still bad) 2008-Dec-21 05:36:21 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.079 (still bad) 2008-Dec-21 05:36:23 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.085 (still bad) 2008-Dec-21 05:36:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2008-Dec-21 05:36:25 LOG4 check_wapp_levels: WAPP-1 power levels: 0.950 0.978 0.949 0.111 2008-Dec-21 05:36:25 LOG4 check_wapp_levels: WAPP-2 power levels: 0.916 1.076 0.948 0.921 2008-Dec-21 05:36:25 LOG4 check_wapp_levels: WAPP-3 power levels: 0.923 0.925 0.890 0.996 2008-Dec-21 05:36:25 LOG4 check_wapp_levels: WAPP-4 power levels: 0.979 0.957 1.081 1.056 2008-Dec-21 05:36:27 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.080 (still bad) 2008-Dec-21 05:36:29 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.084 (still bad) 2008-Dec-21 05:36:31 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.082 (still bad) 2008-Dec-21 05:36:33 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.081 (still bad) 2008-Dec-21 05:36:35 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.085 (still bad) 2008-Dec-21 05:36:37 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.078 (still bad) 2008-Dec-21 05:36:40 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.079 (still bad) 2008-Dec-21 05:36:42 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.079 (still bad) 2008-Dec-21 05:36:44 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.077 (still bad) 2008-Dec-21 05:36:46 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.077 (still bad) 2008-Dec-21 05:36:48 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.082 (still bad) 2008-Dec-21 05:36:50 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.078 (still bad) 2008-Dec-21 05:36:52 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.078 (still bad) 2008-Dec-21 05:36:54 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.079 (still bad) 2008-Dec-21 05:36:56 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.076 (still bad) 2008-Dec-21 05:36:58 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.077 (still bad) 2008-Dec-21 05:37:00 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.084 (still bad) 2008-Dec-21 05:37:02 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.076 (still bad) 2008-Dec-21 05:37:04 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.076 (still bad) 2008-Dec-21 05:37:06 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.079 (still bad) 2008-Dec-21 05:37:08 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.075 (still bad) 2008-Dec-21 05:37:10 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.077 (still bad) 2008-Dec-21 05:37:12 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.081 (still bad) 2008-Dec-21 05:37:14 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.075 (still bad) 2008-Dec-21 05:37:16 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.075 (still bad) 2008-Dec-21 05:37:18 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.075 (still bad) 2008-Dec-21 05:37:20 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.074 (still bad) 2008-Dec-21 05:37:22 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.074 (still bad) 2008-Dec-21 05:37:24 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.081 (still bad) 2008-Dec-21 05:37:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2008-Dec-21 05:37:26 LOG4 check_wapp_levels: WAPP-1 power levels: 0.950 0.977 0.948 0.111 2008-Dec-21 05:37:26 LOG4 check_wapp_levels: WAPP-2 power levels: 0.915 1.072 0.944 0.920 2008-Dec-21 05:37:26 LOG4 check_wapp_levels: WAPP-3 power levels: 0.922 0.920 0.904 1.012 2008-Dec-21 05:37:26 LOG4 check_wapp_levels: WAPP-4 power levels: 0.974 0.951 1.074 1.051 2008-Dec-21 05:37:28 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.074 (still bad) 2008-Dec-21 05:37:30 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.076 (still bad) 2008-Dec-21 05:37:32 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.074 (still bad) 2008-Dec-21 05:37:34 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.074 (still bad) 2008-Dec-21 05:37:36 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.081 (still bad) 2008-Dec-21 05:37:38 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.074 (still bad) 2008-Dec-21 05:37:40 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.073 (still bad) 2008-Dec-21 05:37:42 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.076 (still bad) 2008-Dec-21 05:37:44 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.073 (still bad) 2008-Dec-21 05:37:46 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.075 (still bad) 2008-Dec-21 05:37:48 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.080 (still bad) 2008-Dec-21 05:37:50 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.074 (still bad) 2008-Dec-21 05:37:52 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.072 (still bad) 2008-Dec-21 05:37:54 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.073 (still bad) 2008-Dec-21 05:37:56 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.072 (still bad) 2008-Dec-21 05:37:58 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.076 (still bad) 2008-Dec-21 05:38:00 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.075 (still bad) 2008-Dec-21 05:38:02 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.072 (still bad) 2008-Dec-21 05:38:04 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.075 (still bad) 2008-Dec-21 05:38:06 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.072 (still bad) 2008-Dec-21 05:38:09 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.072 (still bad) 2008-Dec-21 05:38:11 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.073 (still bad) 2008-Dec-21 05:38:13 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.074 (still bad) 2008-Dec-21 05:38:15 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.072 (still bad) 2008-Dec-21 05:38:17 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.073 (still bad) 2008-Dec-21 05:38:19 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.072 (still bad) 2008-Dec-21 05:38:21 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.071 (still bad) 2008-Dec-21 05:38:23 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.077 (still bad) 2008-Dec-21 05:38:25 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.074 (still bad) 2008-Dec-21 05:38:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2008-Dec-21 05:38:27 LOG4 check_wapp_levels: WAPP-1 power levels: 0.947 0.975 0.946 0.111 2008-Dec-21 05:38:27 LOG4 check_wapp_levels: WAPP-2 power levels: 0.913 1.071 0.944 0.918 2008-Dec-21 05:38:27 LOG4 check_wapp_levels: WAPP-3 power levels: 0.924 0.922 0.889 0.993 2008-Dec-21 05:38:27 LOG4 check_wapp_levels: WAPP-4 power levels: 0.972 0.951 1.072 1.049 2008-Dec-21 05:38:29 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.074 (still bad) 2008-Dec-21 05:38:31 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.071 (still bad) 2008-Dec-21 05:38:33 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.073 (still bad) 2008-Dec-21 05:38:35 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.080 (still bad) 2008-Dec-21 05:38:37 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.074 (still bad) 2008-Dec-21 05:38:39 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.072 (still bad) 2008-Dec-21 05:38:41 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.074 (still bad) 2008-Dec-21 05:38:43 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.071 (still bad) 2008-Dec-21 05:38:45 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.072 (still bad) 2008-Dec-21 05:38:47 INFO5 check_wapp_levels: WAPP power levels are between 0.113 and 1.082 (still bad) 2008-Dec-21 05:38:49 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.074 (still bad) 2008-Dec-21 05:38:51 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.073 (still bad) 2008-Dec-21 05:38:53 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.075 (still bad) 2008-Dec-21 05:38:55 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.075 (still bad) 2008-Dec-21 05:38:57 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.076 (still bad) 2008-Dec-21 05:38:59 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.081 (still bad) 2008-Dec-21 05:39:01 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.073 (still bad) 2008-Dec-21 05:39:03 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.072 (still bad) 2008-Dec-21 05:39:05 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.073 (still bad) 2008-Dec-21 05:39:07 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.071 (still bad) 2008-Dec-21 05:39:09 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.071 (still bad) 2008-Dec-21 05:39:11 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.075 (still bad) 2008-Dec-21 05:39:13 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.073 (still bad) 2008-Dec-21 05:39:15 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.070 (still bad) 2008-Dec-21 05:39:17 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.071 (still bad) 2008-Dec-21 05:39:19 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.069 (still bad) 2008-Dec-21 05:39:21 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.071 (still bad) 2008-Dec-21 05:39:23 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.078 (still bad) 2008-Dec-21 05:39:25 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.072 (still bad) 2008-Dec-21 05:39:27 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.070 (still bad) 2008-Dec-21 05:39:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2008-Dec-21 05:39:29 LOG4 check_wapp_levels: WAPP-1 power levels: 0.947 0.974 0.947 0.111 2008-Dec-21 05:39:29 LOG4 check_wapp_levels: WAPP-2 power levels: 0.913 1.072 0.951 0.926 2008-Dec-21 05:39:29 LOG4 check_wapp_levels: WAPP-3 power levels: 0.929 0.927 0.889 0.993 2008-Dec-21 05:39:29 LOG4 check_wapp_levels: WAPP-4 power levels: 0.972 0.953 1.072 1.051 2008-Dec-21 05:39:31 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.071 (still bad) 2008-Dec-21 05:39:34 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.071 (still bad) 2008-Dec-21 05:39:36 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.078 (still bad) 2008-Dec-21 05:39:38 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.074 (still bad) 2008-Dec-21 05:39:40 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.076 (still bad) 2008-Dec-21 05:39:42 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.074 (still bad) 2008-Dec-21 05:39:44 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.074 (still bad) 2008-Dec-21 05:39:46 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.076 (still bad) 2008-Dec-21 05:39:48 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.074 (still bad) 2008-Dec-21 05:39:50 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.073 (still bad) 2008-Dec-21 05:39:52 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.072 (still bad) 2008-Dec-21 05:39:54 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.072 (still bad) 2008-Dec-21 05:39:56 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.071 (still bad) 2008-Dec-21 05:39:58 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.072 (still bad) 2008-Dec-21 05:40:00 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.073 (still bad) 2008-Dec-21 05:40:02 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.071 (still bad) 2008-Dec-21 05:40:04 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.071 (still bad) 2008-Dec-21 05:40:06 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.072 (still bad) 2008-Dec-21 05:40:08 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.072 (still bad) 2008-Dec-21 05:40:10 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.073 (still bad) 2008-Dec-21 05:40:12 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.074 (still bad) 2008-Dec-21 05:40:14 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.072 (still bad) 2008-Dec-21 05:40:16 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.072 (still bad) 2008-Dec-21 05:40:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Dec-21 05:40:18 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Dec-21 05:40:18 LOG5 end_task: Level: (4) ID = <10182> Status = 0 0 0 0 ok 2008-Dec-21 05:40:18 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Dec-21 05:40:18 LOG5 end_task: Level: (3) ID = <10181> Status = 0 0 0 0 ok 2008-Dec-21 05:40:18 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Dec-21 05:40:18 LOG5 finish_task: Level: (2) ID = <10150> Status = 0 0 0 0 ok 2008-Dec-21 05:40:18 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Dec-21 05:40:18 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Dec-21 05:40:18 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Dec-21 05:40:18 LOG5 end_task: Level: (2) ID = <10150> Status = 0 0 0 0 ok 2008-Dec-21 05:40:18 COMMAND run_command_line: EXECUTING command 40: 'ENDIF' 2008-Dec-21 05:40:18 NOTE run_command_file: DONE with command file processing 2008-Dec-21 05:40:18 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2008-Dec-21 05:40:18 STOP finish_task: Finishing task 'running command file '081221_obs.cmd'' 2008-Dec-21 05:40:18 LOG5 finish_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Dec-21 05:40:18 DONE finish_task: DONE finished running: command file '081221_obs.cmd' 2008-Dec-21 05:40:18 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Dec-21 05:40:18 END end_task: Finishing task 'running command file '081221_obs.cmd'' with status 'OK' 2008-Dec-21 05:40:18 LOG5 end_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Dec-21 05:40:18 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.074 (still bad) 2008-Dec-21 05:43:47 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 05:43:47.300 (seconds: 20627.300)!} 2008-Dec-21 05:43:47 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 05:43:47.300 (seconds: 20627.300)! 2008-Dec-21 05:58:46 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 05:58:46.300 (seconds: 21526.300)!} 2008-Dec-21 05:58:46 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 05:58:46.300 (seconds: 21526.300)! 2008-Dec-21 05:59:57 ALERT CIMA-exit_cima: Exiting CIMA ... 2008-Dec-21 05:59:57 COMMAND CIMA-send_to_exec: Sending command to move interim correlator data 2008-Dec-21 05:59:57 LOG4 exec_msg: From OBSERVER: vw_send {mvdata a2048} 2008-Dec-21 05:59:57 LOG3 vw_send: To DATATAKING: mvdata a2048 2008-Dec-21 05:59:57 COMMAND CIMA-send_to_exec: Sending command to clear telescope offsets 2008-Dec-21 05:59:57 LOG4 exec_msg: From OBSERVER: vw_send {pnt c setoff 0 0} 2008-Dec-21 05:59:57 LOG3 vw_send: To DATATAKING: pnt c setoff 0 0 2008-Dec-21 05:59:57 NOTE CIMA-exit_cima: Cleaning up session ... 2008-Dec-21 05:59:57 LOG4 got_cormsg: From DATATAKING: mvdata a2048 2008-Dec-21 05:59:57 LOG4 got_cormsg: From DATATAKING: pnt c setoff 0 0 2008-Dec-21 05:59:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 05:59:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-21 06:00:00 LOG3 exec_msg: Closing socket