2008-Dec-13 17:42:10 BEGIN executive: CIMA executive starting ... 2008-Dec-13 17:42:10 NOTE executive: STARTING NEW CIMA SESSION 2008-Dec-13 17:42:10 INFO1 executive: Using CIMA version 3.0.08 'normal' from 2008-11-25 15:25 2008-Dec-13 17:42:10 INFO4 executive: This is an ON-LINE session 2008-Dec-13 17:42:10 INFO4 executive: This is a LOCAL session 2008-Dec-13 17:42:10 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2008-Dec-13 17:42:10 INFO1 executive: CIMA session for project 'a2048' in 'line' mode for 'Matthew Smith' 2008-Dec-13 17:42:10 INFO2 executive: Logging to '/share/obs4/usr/a2048/a2048.cimalog_20081213' 2008-Dec-13 17:42:11 LOG2 log_preferences: Currently applied preferences: 2008-Dec-13 17:42:11 LOG2 log_preferences: prefs(dailylog) = daily 2008-Dec-13 17:42:11 LOG2 log_preferences: prefs(offlinelog) = skip 2008-Dec-13 17:42:11 LOG2 log_preferences: prefs(datawindow) = ignore 2008-Dec-13 17:42:11 LOG2 log_preferences: prefs(limitwarning) = enabled 2008-Dec-13 17:42:11 LOG2 log_preferences: prefs(wappfailure) = abort 2008-Dec-13 17:42:11 LOG2 log_preferences: prefs(helpstyle) = stay-open 2008-Dec-13 17:42:11 LOG2 log_preferences: prefs(logcolours) = full 2008-Dec-13 17:42:11 LOG2 log_preferences: prefs(displaylevel) = INFO3 2008-Dec-13 17:42:11 LOG2 log_preferences: prefs(loglevel) = LOG5 2008-Dec-13 17:42:11 LOG2 log_preferences: prefs(displayformat) = short 2008-Dec-13 17:42:11 LOG2 log_preferences: prefs(logformat) = new 2008-Dec-13 17:42:11 LOG2 log_preferences: prefs(fontsize) = 4 2008-Dec-13 17:42:11 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2008-Dec-13 17:42:11 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2048 2008-Dec-13 17:42:11 ALERT executive: CIMA executive ready 2008-Dec-13 17:42:12 NOTE frontend: CIMA frontend ready 2008-Dec-13 17:42:14 LOG4 got_cormsg: From DATATAKING: Can't communicate with program corProg 2008-Dec-13 17:42:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 17:42:14 LOG4 got_cormsg: From DATATAKING: setup 2008-Dec-13 17:42:14 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2008-Dec-13 17:42:14 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2008-Dec-13 17:42:14 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2008-Dec-13 17:42:14 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2008-Dec-13 17:42:15 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Dec-13 17:42:15 NOTE select_receiver: Starting to select receiver ALFA 2008-Dec-13 17:42:15 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Dec-13 17:42:15 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Dec-13 17:42:15 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Dec-13 17:42:15 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Dec-13 17:42:15 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Dec-13 17:42:15 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Dec-13 17:42:15 DONE finish_task: DONE finished selecting: receiver ALFA 2008-Dec-13 17:42:15 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Dec-13 17:42:15 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Dec-13 17:42:15 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Dec-13 17:42:21 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0xd 2008-Dec-13 17:42:21 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0xd' 2008-Dec-13 17:42:21 LOG4 got_cormsg: From DATATAKING: vw% io 2008-Dec-13 17:42:21 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2008-Dec-13 17:42:21 LOG4 got_cormsg: From DATATAKING: 2008-Dec-13 17:42:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 17:42:21 LOG4 got_cormsg: From DATATAKING: tape stat 2008-Dec-13 17:42:21 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2008-Dec-13 17:42:21 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2008-Dec-13 17:42:21 LOG4 got_cormsg: From DATATAKING: vw% connectall 2008-Dec-13 17:42:21 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2008-Dec-13 17:42:21 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2008-Dec-13 17:42:21 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2008-Dec-13 17:42:21 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2008-Dec-13 17:42:21 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2008-Dec-13 17:42:21 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2008-Dec-13 17:42:21 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2008-Dec-13 17:42:21 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2008-Dec-13 17:42:21 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2048 2008-Dec-13 17:42:21 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2008-Dec-13 17:42:21 LOG4 exec_msg: From OBSERVER: restart_wapp 2008-Dec-13 17:42:21 LOG5 restart_wapp: Calling 'restart_wapp' 2008-Dec-13 17:42:21 BEGIN begin_task: Starting task 'restarting the WAPPs' 2008-Dec-13 17:42:21 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Dec-13 17:42:21 NOTE restart_wapp: Restarting all WAPPs 2008-Dec-13 17:42:21 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2008-Dec-13 17:42:21 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2008-Dec-13 17:42:21 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Dec-13 17:42:21 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Dec-13 17:42:21 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Dec-13 17:42:22 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Dec-13 17:42:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 17:42:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 17:42:24 ALERT WAPP=1-wappcon: WAPP1 restarting 2008-Dec-13 17:42:24 ALERT WAPP=2-wappcon: WAPP2 restarting 2008-Dec-13 17:42:25 ALERT WAPP=4-wappcon: WAPP4 restarting 2008-Dec-13 17:42:25 ALERT WAPP=3-wappcon: WAPP3 restarting 2008-Dec-13 17:42:28 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 17:42:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 17:43:17 INFO1 CIMA-run_command_file: Transferring command file '081213_obs.cmd ' to executive ... 2008-Dec-13 17:43:17 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 3 {LOAD ages_config.conf} 2008-Dec-13 17:43:17 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 4 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5} 2008-Dec-13 17:43:17 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 5 {CATALOG AGESFull.cat} 2008-Dec-13 17:43:17 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {IF LSTSLEW(AGES7448_p2_143) < 230026 THEN} 2008-Dec-13 17:43:17 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {FIXEDDRIFT az=32.14 alfaangle=-8.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p2_143 ra=225000.00 dec=142600.00} 2008-Dec-13 17:43:17 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 12 {ENDIF} 2008-Dec-13 17:43:17 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 15 {IF LSTSLEW(AGES7448_p2_145) < 232326 THEN} 2008-Dec-13 17:43:17 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 16 {FIXEDDRIFT az=64.86 alfaangle=-39.7 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p2_145 ra=225000.00 dec=142300.00} 2008-Dec-13 17:43:17 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 19 {ENDIF} 2008-Dec-13 17:43:17 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 22 {IF LSTSLEW(AGES7448_p2_147) < 234626 THEN} 2008-Dec-13 17:43:17 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 23 {FIXEDDRIFT az=75.60 alfaangle=-49.7 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p2_147 ra=225000.00 dec=142000.00} 2008-Dec-13 17:43:17 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 26 {ENDIF} 2008-Dec-13 17:43:17 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 29 {IF LSTSLEW(AGES33PP_p1_099) < 005031 THEN} 2008-Dec-13 17:43:17 LOG4 exec_msg: From OBSERVER: store_command_file_line 14 30 {FIXEDDRIFT az=211.36 alfaangle=-11.7 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p1_099 ra=12400.00 dec=301300.00} 2008-Dec-13 17:43:17 LOG4 exec_msg: From OBSERVER: store_command_file_line 15 33 {ENDIF} 2008-Dec-13 17:43:17 LOG4 exec_msg: From OBSERVER: store_command_file_line 16 36 {IF LSTSLEW(AGES33PP_p2_080) < 011331 THEN} 2008-Dec-13 17:43:17 LOG4 exec_msg: From OBSERVER: store_command_file_line 17 37 {FIXEDDRIFT az=190.86 alfaangle=8.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p2_080 ra=12400.00 dec=304130.00} 2008-Dec-13 17:43:17 LOG4 exec_msg: From OBSERVER: store_command_file_line 18 40 {ENDIF} 2008-Dec-13 17:43:17 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-Dec-13 17:43:17 LOG4 exec_msg: From OBSERVER: run_command_file 081213_obs.cmd 1 1 18 2008-Dec-13 17:43:17 LOG4 run_command_file: Calling 'run_command_file 081213_obs.cmd 1 1 18' 2008-Dec-13 17:43:17 BEGIN begin_task: Starting task 'running command file '081213_obs.cmd'' 2008-Dec-13 17:43:17 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Dec-13 17:43:17 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '081213_obs.cmd' ...} 2008-Dec-13 17:43:17 NOTE run_command_file: Starting execution of command file '081213_obs.cmd' from line 1 2008-Dec-13 17:43:17 COMMAND run_command_line: EXECUTING command 3: 'LOAD ages_config.conf' 2008-Dec-13 17:43:17 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2008-Dec-13 17:43:18 NOTE CIMA-check_config_file: File 'ages_config.conf' contains an ALFA set-up which will be ignored! 2008-Dec-13 17:43:18 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Dec-13 17:43:18 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2008-Dec-13 17:43:18 NOTE CIMA-load_config_file: Loading configuration file 'ages_config.conf' 2008-Dec-13 17:43:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Dec-13 17:43:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Dec-13 17:43:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Dec-13 17:43:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Dec-13 17:43:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Dec-13 17:43:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2008-Dec-13 17:43:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Dec-13 17:43:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786" 2008-Dec-13 17:43:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786" 2008-Dec-13 17:43:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786" 2008-Dec-13 17:43:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786" 2008-Dec-13 17:43:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786" 2008-Dec-13 17:43:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786" 2008-Dec-13 17:43:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786" 2008-Dec-13 17:43:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786" 2008-Dec-13 17:43:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786" 2008-Dec-13 17:43:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Dec-13 17:43:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Dec-13 17:43:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Dec-13 17:43:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Dec-13 17:43:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Dec-13 17:43:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Dec-13 17:43:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Dec-13 17:43:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Dec-13 17:43:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Dec-13 17:43:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Dec-13 17:43:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Dec-13 17:43:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Dec-13 17:43:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Dec-13 17:43:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2008-Dec-13 17:43:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Dec-13 17:43:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Dec-13 17:43:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Dec-13 17:43:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Dec-13 17:43:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Dec-13 17:43:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Dec-13 17:43:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Dec-13 17:43:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Dec-13 17:43:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Dec-13 17:43:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1670.405752" 2008-Dec-13 17:43:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Dec-13 17:43:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Dec-13 17:43:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Dec-13 17:43:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Dec-13 17:43:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Dec-13 17:43:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Dec-13 17:43:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Dec-13 17:43:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Dec-13 17:43:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Dec-13 17:43:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Dec-13 17:43:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Dec-13 17:43:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Dec-13 17:43:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Dec-13 17:43:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Dec-13 17:43:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Dec-13 17:43:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Dec-13 17:43:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Dec-13 17:43:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Dec-13 17:43:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Dec-13 17:43:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Dec-13 17:43:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Dec-13 17:43:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Dec-13 17:43:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Dec-13 17:43:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Dec-13 17:43:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Dec-13 17:43:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Dec-13 17:43:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Dec-13 17:43:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Dec-13 17:43:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Dec-13 17:43:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Dec-13 17:43:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Dec-13 17:43:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Dec-13 17:43:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Dec-13 17:43:20 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Dec-13 17:43:20 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Dec-13 17:43:20 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Dec-13 17:43:20 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Dec-13 17:43:20 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Dec-13 17:43:20 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Dec-13 17:43:20 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Dec-13 17:43:20 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Dec-13 17:43:20 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Dec-13 17:43:20 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Dec-13 17:43:20 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Dec-13 17:43:20 INFO1 config_iflo: Selecting receiver ALFA 2008-Dec-13 17:43:20 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2008-Dec-13 17:43:20 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2008-Dec-13 17:43:20 START begin_task: Starting task 'selecting receiver ALFA' 2008-Dec-13 17:43:20 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Dec-13 17:43:20 NOTE select_receiver: Starting to select receiver ALFA 2008-Dec-13 17:43:20 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Dec-13 17:43:20 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Dec-13 17:43:20 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Dec-13 17:43:20 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Dec-13 17:43:20 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Dec-13 17:43:20 LOG5 finish_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Dec-13 17:43:20 INFO2 finish_task: DONE finished selecting: receiver ALFA 2008-Dec-13 17:43:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-13 17:43:20 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Dec-13 17:43:20 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Dec-13 17:43:20 START begin_task: Starting task 'waiting for receiver ALFA' 2008-Dec-13 17:43:20 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2008-Dec-13 17:43:20 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2008-Dec-13 17:43:20 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2008-Dec-13 17:43:20 INFO1 config_iflo: Configuring rest of the IF/LO path 2008-Dec-13 17:43:20 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2008-Dec-13 17:43:20 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Dec-13 17:43:20 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Dec-13 17:43:20 START begin_task: Starting task 'waiting on command to ALFA' 2008-Dec-13 17:43:20 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2008-Dec-13 17:43:20 LOG4 got_alfamon: From ALFAMON: ACK 2008-Dec-13 17:43:20 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Dec-13 17:43:20 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2008-Dec-13 17:43:20 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Dec-13 17:43:20 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Dec-13 17:43:20 LOG3 vw_send: To DATATAKING: alfafb 1 2008-Dec-13 17:43:20 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2008-Dec-13 17:43:20 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Dec-13 17:43:20 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Dec-13 17:43:20 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2008-Dec-13 17:43:20 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2008-Dec-13 17:43:20 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2008-Dec-13 17:43:20 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1670405752.0} 2008-Dec-13 17:43:20 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2008-Dec-13 17:43:20 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2008-Dec-13 17:43:20 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Dec-13 17:43:20 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Dec-13 17:43:20 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Dec-13 17:43:20 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Dec-13 17:43:20 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Dec-13 17:43:20 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2008-Dec-13 17:43:20 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2008-Dec-13 17:43:20 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2008-Dec-13 17:43:20 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2008-Dec-13 17:43:20 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Dec-13 17:43:20 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2008-Dec-13 17:43:20 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Dec-13 17:43:20 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Dec-13 17:43:20 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-13 17:43:20 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Dec-13 17:43:20 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2008-Dec-13 17:43:20 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Dec-13 17:43:20 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2008-Dec-13 17:43:21 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2008-Dec-13 17:43:21 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Dec-13 17:43:21 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Dec-13 17:43:21 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Dec-13 17:43:21 LOG5 begin_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2008-Dec-13 17:43:21 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Dec-13 17:43:21 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Dec-13 17:43:21 LOG4 got_cormsg: From DATATAKING: alfafb 1 2008-Dec-13 17:43:21 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2008-Dec-13 17:43:21 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2008-Dec-13 17:43:21 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2008-Dec-13 17:43:21 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2008-Dec-13 17:43:21 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1670405752.0} 2008-Dec-13 17:43:21 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2008-Dec-13 17:43:21 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2008-Dec-13 17:43:21 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2008-Dec-13 17:43:21 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2008-Dec-13 17:43:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2008-Dec-13 17:43:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2008-Dec-13 17:43:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Dec-13 17:43:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2008-Dec-13 17:43:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Dec-13 17:43:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-13 17:43:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Dec-13 17:43:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2008-Dec-13 17:43:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2008-Dec-13 17:43:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2008-Dec-13 17:43:21 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Dec-13 17:43:27 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 17:43:28 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 17:43:28 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 17:43:28 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 17:43:28 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 17:43:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 17:43:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 17:43:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 17:43:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 17:43:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 17:43:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 17:43:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 17:43:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 17:43:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 17:43:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 17:43:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 17:43:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 17:43:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 17:43:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 17:43:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 17:43:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 17:43:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 17:43:36 LOG4 got_cormsg: From DATATAKING: DONE 2008-Dec-13 17:43:36 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Dec-13 17:43:36 LOG5 end_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2008-Dec-13 17:43:36 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Dec-13 17:43:36 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Dec-13 17:43:36 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Dec-13 17:43:36 DONE finish_task: DONE finished configuration: IF/LO path 2008-Dec-13 17:43:36 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Dec-13 17:43:37 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Dec-13 17:43:37 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Dec-13 17:43:37 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Dec-13 17:43:37 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Dec-13 17:43:37 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Dec-13 17:43:37 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Dec-13 17:43:37 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2008-Dec-13 17:43:37 START begin_task: Starting task 'selecting calibration port' 2008-Dec-13 17:43:37 LOG5 begin_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-Dec-13 17:43:37 LOG3 vw_send: To DATATAKING: calport 3 2008-Dec-13 17:43:37 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Dec-13 17:43:37 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Dec-13 17:43:37 START begin_task: Starting task 'waiting on calport' 2008-Dec-13 17:43:37 LOG5 begin_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2008-Dec-13 17:43:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 17:43:37 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Dec-13 17:43:37 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Dec-13 17:43:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 17:43:37 LOG4 got_cormsg: From DATATAKING: DONE 2008-Dec-13 17:43:37 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Dec-13 17:43:37 LOG5 end_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2008-Dec-13 17:43:37 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Dec-13 17:43:37 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Dec-13 17:43:37 LOG5 end_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-Dec-13 17:43:37 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Dec-13 17:43:37 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Dec-13 17:43:37 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Dec-13 17:43:37 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2008-Dec-13 17:43:37 LOG3 CALCONTROL-caltrig: Software trigger 2008-Dec-13 17:43:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 17:43:37 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Dec-13 17:43:37 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Dec-13 17:43:37 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Dec-13 17:43:37 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2008-Dec-13 17:43:37 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Dec-13 17:43:37 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Dec-13 17:43:37 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Dec-13 17:43:37 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Dec-13 17:43:37 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Dec-13 17:43:37 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Dec-13 17:43:37 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Dec-13 17:43:37 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Dec-13 17:43:37 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Matthew Smith 2008-Dec-13 17:43:37 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Matthew Smith 2008-Dec-13 17:43:37 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Matthew Smith 2008-Dec-13 17:43:37 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Matthew Smith 2008-Dec-13 17:43:37 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Dec-13 17:43:37 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Dec-13 17:43:37 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Dec-13 17:43:37 LOG5 begin_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2008-Dec-13 17:43:37 LOG3 CALCONTROL-caltrig: Software trigger 2008-Dec-13 17:43:37 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Dec-13 17:43:37 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Dec-13 17:43:37 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Dec-13 17:43:38 LOG5 end_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2008-Dec-13 17:43:38 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Matthew Smith 2008-Dec-13 17:43:38 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Matthew Smith 2008-Dec-13 17:43:38 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Matthew Smith 2008-Dec-13 17:43:38 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Matthew Smith 2008-Dec-13 17:43:38 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Dec-13 17:43:38 LOG5 finish_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Dec-13 17:43:38 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Dec-13 17:43:38 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Dec-13 17:43:38 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Dec-13 17:43:38 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Dec-13 17:43:38 COMMAND run_command_line: EXECUTING command 4: 'SETUP FIXEDDRIFT calwhen=tracking calsecs=5' 2008-Dec-13 17:43:38 COMMAND run_command_line: EXECUTING command 5: 'CATALOG AGESFull.cat' 2008-Dec-13 17:43:38 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2008-Dec-13 17:43:38 COMMAND run_command_line: EXECUTING command 8: 'IF LSTSLEW(AGES7448_p2_143) < 230026 THEN' 2008-Dec-13 17:43:39 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES7448_p2_143) < 230026 2008-Dec-13 17:43:39 INFO5 is_if_valid: Condition parsed as: 22.879352333333333 < 23.007222222222222 2008-Dec-13 17:43:39 COMMAND run_command_line: EXECUTING command 9: 'FIXEDDRIFT az=32.14 alfaangle=-8.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p2_143 ra=225000.00 dec=142600.00' 2008-Dec-13 17:43:39 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Dec-13 17:43:39 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Matthew Smith' 2008-Dec-13 17:43:39 NOTE WAPPDATA-new_file: New FITS file: wapp.20081213.a2048.0000.fits 2008-Dec-13 17:43:39 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Dec-13 17:43:39 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Dec-13 17:43:39 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20081213.a2048.0000.fits} 2008-Dec-13 17:43:39 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Matthew Smith' 2008-Dec-13 17:43:40 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Dec-13 17:43:40 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 32.14 -8.6 hcorcal 5 tracking no first 1 AGES7448_p2_143 225000.00 142600.00 J 8500.0 Heliocentric velocity(optical)' 2008-Dec-13 17:43:40 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Dec-13 17:43:40 LOG5 begin_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2008-Dec-13 17:43:40 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'STOPPED' 2008-Dec-13 17:43:40 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Dec-13 17:43:40 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES7448_p2_143} 2008-Dec-13 17:43:40 INFO3 fixed_driftmap: Sending telescope to Az = 32.14 and ZA = 4.55 2008-Dec-13 17:43:40 LOG3 track_source: Calling 'track_source AGES7448_p2_143 32.14 4.5525632714 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Dec-13 17:43:40 START begin_task: Starting task 'sending tracking commands' 2008-Dec-13 17:43:40 LOG5 begin_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2008-Dec-13 17:43:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7448_p2_143} INFO {Slewing to source 'AGES7448_p2_143' ...} 2008-Dec-13 17:43:40 INFO1 track_source: Starting to track AGES7448_p2_143 2008-Dec-13 17:43:40 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7448_p2_143" 2008-Dec-13 17:43:40 LOG3 vw_send: To DATATAKING: set ra 32.14 2008-Dec-13 17:43:40 LOG3 vw_send: To DATATAKING: set dec 4.5525632714 2008-Dec-13 17:43:40 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Dec-13 17:43:40 LOG3 vw_send: To DATATAKING: pnt tr 32.14 4.5525632714 -CF 2008-Dec-13 17:43:40 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Dec-13 17:43:40 STOP finish_task: Finishing task 'sending tracking commands' 2008-Dec-13 17:43:40 LOG5 finish_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2008-Dec-13 17:43:40 INFO2 finish_task: DONE finished sending: tracking commands 2008-Dec-13 17:43:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-13 17:43:40 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Dec-13 17:43:40 LOG5 end_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2008-Dec-13 17:43:40 START begin_task: Starting task 'rotate ALFA to -8.6 degrees' 2008-Dec-13 17:43:40 LOG5 begin_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2008-Dec-13 17:43:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -8.6 degrees ...} 2008-Dec-13 17:43:40 INFO2 rotate_alfa: ALFA commanded to -8.6 degrees 2008-Dec-13 17:43:40 LOG3 sock_errsend: To ALFAMOTOR: POSITION -8.6 REPLY 2008-Dec-13 17:43:40 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Dec-13 17:43:40 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Dec-13 17:43:40 LOG5 begin_task: Level: (4) ID = <10017> Status = 0 0 0 0 ok 2008-Dec-13 17:43:40 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7448_p2_143" 2008-Dec-13 17:43:40 LOG4 got_cormsg: From DATATAKING: set ra 32.14 2008-Dec-13 17:43:40 LOG4 got_cormsg: From DATATAKING: set dec 4.5525632714 2008-Dec-13 17:43:40 LOG4 got_cormsg: From DATATAKING: vw% 32.14 2008-Dec-13 17:43:40 LOG4 got_cormsg: From DATATAKING: vw% 4.5525632714 2008-Dec-13 17:43:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 17:43:40 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Dec-13 17:43:40 LOG4 got_cormsg: From DATATAKING: pnt tr 32.14 4.5525632714 -CF 2008-Dec-13 17:43:40 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Dec-13 17:43:40 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Dec-13 17:43:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 17:43:46 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Dec-13 17:43:46 INFO3 alfa_motor: ALFA rotator in-position -8.60 degrees 2008-Dec-13 17:43:46 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Dec-13 17:43:46 LOG5 end_task: Level: (4) ID = <10017> Status = 0 0 0 0 ok 2008-Dec-13 17:43:46 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Dec-13 17:43:46 STOP finish_task: Finishing task 'rotate ALFA to -8.6 degrees' 2008-Dec-13 17:43:46 LOG5 finish_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2008-Dec-13 17:43:46 INFO2 finish_task: DONE finished configuration: rotating ALFA to -8.6 degrees 2008-Dec-13 17:43:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-13 17:43:46 STOP end_task: Finishing task 'rotate ALFA to -8.6 degrees' with status 'OK' 2008-Dec-13 17:43:46 LOG5 end_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2008-Dec-13 17:43:46 START begin_task: Starting task 'waiting on telescope' 2008-Dec-13 17:43:46 LOG5 begin_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2008-Dec-13 17:43:46 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Dec-13 17:43:46 LOG3 waittrk: Start waittrk 5 2008-Dec-13 17:43:46 START begin_task: Starting task 'waiting on telescope movement' 2008-Dec-13 17:43:46 LOG5 begin_task: Level: (4) ID = <10019> Status = 0 0 0 0 ok 2008-Dec-13 17:43:51 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Dec-13 17:43:51 LOG5 end_task: Level: (4) ID = <10019> Status = 0 0 0 0 ok 2008-Dec-13 17:43:51 START begin_task: Starting task 'waiting on telescope on source' 2008-Dec-13 17:43:51 LOG5 begin_task: Level: (4) ID = <10020> Status = 0 0 0 0 ok 2008-Dec-13 17:49:41 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Dec-13 17:49:41 LOG5 end_task: Level: (4) ID = <10020> Status = 0 0 0 0 ok 2008-Dec-13 17:49:41 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Dec-13 17:49:41 INFO2 waittrk: Now tracking AGES7448_p2_143 2008-Dec-13 17:49:41 LOG4 waittrk: Current telescope position: Az = 391.87 ZA = 4.52 2008-Dec-13 17:49:41 STOP finish_task: Finishing task 'waiting on telescope' 2008-Dec-13 17:49:41 LOG5 finish_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2008-Dec-13 17:49:41 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Dec-13 17:49:41 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-13 17:49:41 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Dec-13 17:49:41 LOG5 end_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2008-Dec-13 17:49:41 START begin_task: Starting task 'selecting calibration type' 2008-Dec-13 17:49:41 LOG5 begin_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2008-Dec-13 17:49:41 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Dec-13 17:49:41 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Dec-13 17:49:41 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Dec-13 17:49:41 START begin_task: Starting task 'waiting on setcal' 2008-Dec-13 17:49:41 LOG5 begin_task: Level: (4) ID = <10022> Status = 0 0 0 0 ok 2008-Dec-13 17:49:41 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Dec-13 17:49:41 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Dec-13 17:49:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 17:49:41 LOG4 got_cormsg: From DATATAKING: DONE 2008-Dec-13 17:49:41 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Dec-13 17:49:41 LOG5 end_task: Level: (4) ID = <10022> Status = 0 0 0 0 ok 2008-Dec-13 17:49:41 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Dec-13 17:49:41 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Dec-13 17:49:41 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Dec-13 17:49:41 START begin_task: Starting task 'waiting on command to ALFA' 2008-Dec-13 17:49:41 LOG5 begin_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2008-Dec-13 17:49:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 17:49:41 LOG4 got_alfamon: From ALFAMON: ACK 2008-Dec-13 17:49:41 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Dec-13 17:49:41 LOG5 end_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2008-Dec-13 17:49:41 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Dec-13 17:49:41 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Dec-13 17:49:41 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Dec-13 17:49:41 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Dec-13 17:49:41 START begin_task: Starting task 'waiting on command to ALFA' 2008-Dec-13 17:49:41 LOG5 begin_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2008-Dec-13 17:49:41 LOG4 got_alfamon: From ALFAMON: ACK 2008-Dec-13 17:49:41 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Dec-13 17:49:41 LOG5 end_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2008-Dec-13 17:49:41 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Dec-13 17:49:41 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Dec-13 17:49:41 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Dec-13 17:49:41 LOG5 end_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2008-Dec-13 17:49:41 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2008-Dec-13 17:49:41 INFO2 astwait: Waiting for 299 seconds from 21:49:41 to 21:54:40 UTC ... 2008-Dec-13 17:49:41 LOG4 send_obs_status: To obs_status: <1> TASKTIME 299 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Dec-13 17:49:41 START begin_task: Starting task 'waiting on waiting for AST time' 2008-Dec-13 17:49:41 LOG5 begin_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2008-Dec-13 17:54:40 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2008-Dec-13 17:54:40 LOG5 end_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2008-Dec-13 17:54:40 INFO3 astwait: Finished waiting 2008-Dec-13 17:54:40 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Dec-13 17:54:40 LOG5 dopset_later: Calling 'dopset_later 61.217472701617531' 2008-Dec-13 17:54:40 INFO3 dopset_later: Setting Doppler correction for 17:55:40 (61.2 seconds from now) 2008-Dec-13 17:54:40 LOG5 antvel: Calling 'antvel 32.140000 4.552563 F 61.217472701617531' 2008-Dec-13 17:54:40 LOG2 antvel: Transforming current Az = 32.14 ZA = 4.55 to apparent RA = 22:50:26.8 Dec = +14:29:00.3 2008-Dec-13 17:54:40 LOG2 antvel: Parameters to Doppler: Heliocentric 78940 2008 348 0.0 2008-Dec-13 17:54:40 INFO5 antvel: Computed antenna velocity: +28.37592 km/s 2008-Dec-13 17:54:40 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=28.375920603499999 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Dec-13 17:54:40 INFO4 dopset_gen: New sky frequencies: 1381.112704 1381.112704 1381.112704 1381.112704 1381.112704 1381.112704 1381.112704 1381.112704 1381.112704 2008-Dec-13 17:54:40 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.112704 sky0=1381.112704 sky1=1381.112704 sky2=1381.112704 sky3=1381.112704 sky4=1381.112704 sky5=1381.112704 sky6=1381.112704 sky7=1381.112704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Dec-13 17:54:40 LOG2 dopset_gen: Result from 'sky2syn': 1631.112704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Dec-13 17:54:40 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631112704.0} 2008-Dec-13 17:54:40 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-13 17:54:40 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Dec-13 17:54:40 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Dec-13 17:54:40 INFO5 fixed_driftmap: Tracking J2000 position: RA = 22:49:02.0 Dec = +14:26:09.3 2008-Dec-13 17:54:40 LOG3 track_source: Calling 'track_source AGES7448_p2_143 224902.0 142609.3 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Dec-13 17:54:40 START begin_task: Starting task 'sending tracking commands' 2008-Dec-13 17:54:40 LOG5 begin_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-Dec-13 17:54:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7448_p2_143} INFO {Slewing to source 'AGES7448_p2_143' ...} 2008-Dec-13 17:54:40 INFO1 track_source: Starting to track AGES7448_p2_143 2008-Dec-13 17:54:40 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7448_p2_143" 2008-Dec-13 17:54:40 LOG3 vw_send: To DATATAKING: set ra 224902.0 2008-Dec-13 17:54:40 LOG3 vw_send: To DATATAKING: set dec 142609.3 2008-Dec-13 17:54:40 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Dec-13 17:54:40 LOG3 vw_send: To DATATAKING: pnt tr 224902.0 142609.3 -CJ 2008-Dec-13 17:54:40 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Dec-13 17:54:40 STOP finish_task: Finishing task 'sending tracking commands' 2008-Dec-13 17:54:40 LOG5 finish_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-Dec-13 17:54:40 INFO2 finish_task: DONE finished sending: tracking commands 2008-Dec-13 17:54:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-13 17:54:40 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Dec-13 17:54:40 LOG5 end_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-Dec-13 17:54:40 START begin_task: Starting task 'waiting on telescope' 2008-Dec-13 17:54:40 LOG5 begin_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2008-Dec-13 17:54:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Dec-13 17:54:40 LOG3 waittrk: Start waittrk 5 2008-Dec-13 17:54:40 START begin_task: Starting task 'waiting on telescope movement' 2008-Dec-13 17:54:40 LOG5 begin_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2008-Dec-13 17:54:40 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631112704.0} 2008-Dec-13 17:54:40 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-13 17:54:40 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Dec-13 17:54:40 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7448_p2_143" 2008-Dec-13 17:54:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 17:54:40 LOG4 got_cormsg: From DATATAKING: set ra 224902.0 2008-Dec-13 17:54:40 LOG4 got_cormsg: From DATATAKING: set dec 142609.3 2008-Dec-13 17:54:40 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Dec-13 17:54:40 LOG4 got_cormsg: From DATATAKING: pnt tr 224902.0 142609.3 -CJ 2008-Dec-13 17:54:40 LOG4 got_cormsg: From DATATAKING: 224902.0 2008-Dec-13 17:54:40 LOG4 got_cormsg: From DATATAKING: vw% 142609.3 2008-Dec-13 17:54:40 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2008-Dec-13 17:54:40 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Dec-13 17:54:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 17:54:45 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Dec-13 17:54:45 LOG5 end_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2008-Dec-13 17:54:45 START begin_task: Starting task 'waiting on telescope on source' 2008-Dec-13 17:54:45 LOG5 begin_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2008-Dec-13 17:54:50 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Dec-13 17:54:50 LOG5 end_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2008-Dec-13 17:54:50 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Dec-13 17:54:50 INFO2 waittrk: Now tracking AGES7448_p2_143 2008-Dec-13 17:54:50 LOG4 waittrk: Current telescope position: Az = 392.25 ZA = 4.53 2008-Dec-13 17:54:50 STOP finish_task: Finishing task 'waiting on telescope' 2008-Dec-13 17:54:50 LOG5 finish_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2008-Dec-13 17:54:50 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Dec-13 17:54:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-13 17:54:50 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Dec-13 17:54:50 LOG5 end_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2008-Dec-13 17:54:50 START begin_task: Starting task 'adjusting WAPP power' 2008-Dec-13 17:54:50 LOG5 begin_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2008-Dec-13 17:54:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Dec-13 17:54:50 INFO2 adjust_power: Starting to adjust WAPP power 2008-Dec-13 17:54:50 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Dec-13 17:54:50 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Dec-13 17:54:50 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Dec-13 17:54:50 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Dec-13 17:54:50 LOG5 begin_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2008-Dec-13 17:54:51 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Dec-13 17:54:51 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Dec-13 17:54:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 17:54:54 LOG4 got_cormsg: From DATATAKING: DONE 2008-Dec-13 17:54:54 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Dec-13 17:54:54 LOG5 end_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2008-Dec-13 17:54:54 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Dec-13 17:54:54 START begin_task: Starting task 'adjusting WAPP power' 2008-Dec-13 17:54:54 LOG5 begin_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2008-Dec-13 17:54:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Dec-13 17:54:54 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Dec-13 17:54:54 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Dec-13 17:54:54 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Dec-13 17:54:54 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Dec-13 17:54:54 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Dec-13 17:54:54 LOG5 begin_task: Level: (5) ID = <10033> Status = 0 0 0 0 ok 2008-Dec-13 17:54:54 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Dec-13 17:54:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 17:54:54 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 6 6 dB 2008-Dec-13 17:54:54 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 0 dB --- beam 5: 5 5 dB 2008-Dec-13 17:54:54 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2008-Dec-13 17:54:54 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 2 0 dB 2008-Dec-13 17:54:54 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Dec-13 17:54:54 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Dec-13 17:54:54 LOG5 end_task: Level: (5) ID = <10033> Status = 0 0 0 0 ok 2008-Dec-13 17:54:55 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.930 0.899 ALFA beam 1: 1.090 0.987 2008-Dec-13 17:54:55 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.978 0.947 ALFA beam 3: 1.062 1.084 2008-Dec-13 17:54:55 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.046 1.079 ALFA beam 5: 1.073 0.952 2008-Dec-13 17:54:55 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.908 0.100 ALFA beam 7: 1.005 0.110 2008-Dec-13 17:54:55 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Dec-13 17:54:55 LOG5 finish_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2008-Dec-13 17:54:55 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Dec-13 17:54:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-13 17:54:55 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Dec-13 17:54:55 LOG5 end_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2008-Dec-13 17:54:55 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Dec-13 17:54:55 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Dec-13 17:54:55 LOG5 finish_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2008-Dec-13 17:54:55 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Dec-13 17:54:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-13 17:54:55 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Dec-13 17:54:55 LOG5 end_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2008-Dec-13 17:54:55 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Matthew Smith 2008-Dec-13 17:54:55 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Matthew Smith 2008-Dec-13 17:54:55 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Matthew Smith 2008-Dec-13 17:54:55 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Matthew Smith 2008-Dec-13 17:54:55 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20081213.a2048.0000.fits' is empty! 2008-Dec-13 17:54:55 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Dec-13 17:54:55 START begin_task: Starting task 'WAPP calibration' 2008-Dec-13 17:54:55 LOG5 begin_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2008-Dec-13 17:54:55 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Dec-13 17:54:55 START begin_task: Starting task 'selecting calibration type' 2008-Dec-13 17:54:55 LOG5 begin_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2008-Dec-13 17:54:55 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Dec-13 17:54:55 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Dec-13 17:54:55 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Dec-13 17:54:55 START begin_task: Starting task 'waiting on setcal' 2008-Dec-13 17:54:55 LOG5 begin_task: Level: (5) ID = <10036> Status = 0 0 0 0 ok 2008-Dec-13 17:54:55 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Matthew Smith' 2008-Dec-13 17:54:55 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Dec-13 17:54:55 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Dec-13 17:54:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 17:54:55 LOG4 got_cormsg: From DATATAKING: DONE 2008-Dec-13 17:54:55 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Dec-13 17:54:55 LOG5 end_task: Level: (5) ID = <10036> Status = 0 0 0 0 ok 2008-Dec-13 17:54:55 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Dec-13 17:54:55 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Dec-13 17:54:55 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Dec-13 17:54:55 START begin_task: Starting task 'waiting on command to ALFA' 2008-Dec-13 17:54:55 LOG5 begin_task: Level: (5) ID = <10037> Status = 0 0 0 0 ok 2008-Dec-13 17:54:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 17:54:55 LOG4 got_alfamon: From ALFAMON: ACK 2008-Dec-13 17:54:55 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Dec-13 17:54:55 LOG5 end_task: Level: (5) ID = <10037> Status = 0 0 0 0 ok 2008-Dec-13 17:54:55 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Dec-13 17:54:55 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Dec-13 17:54:55 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Dec-13 17:54:55 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Dec-13 17:54:55 START begin_task: Starting task 'waiting on command to ALFA' 2008-Dec-13 17:54:55 LOG5 begin_task: Level: (5) ID = <10038> Status = 0 0 0 0 ok 2008-Dec-13 17:54:55 LOG4 got_alfamon: From ALFAMON: ACK 2008-Dec-13 17:54:55 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Dec-13 17:54:55 LOG5 end_task: Level: (5) ID = <10038> Status = 0 0 0 0 ok 2008-Dec-13 17:54:55 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Dec-13 17:54:55 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Dec-13 17:54:55 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Dec-13 17:54:55 LOG5 end_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2008-Dec-13 17:54:55 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Dec-13 17:54:55 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Dec-13 17:54:55 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Dec-13 17:54:55 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Dec-13 17:54:55 LOG5 begin_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2008-Dec-13 17:54:56 LOG3 CALCONTROL-caltrig: Software trigger 2008-Dec-13 17:54:56 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Dec-13 17:54:56 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Dec-13 17:54:56 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Dec-13 17:54:56 LOG5 end_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2008-Dec-13 17:54:56 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Dec-13 17:54:56 LOG4 take_data: Calling 'take_data 5 5 CAL ON -' 2008-Dec-13 17:54:56 START begin_task: Starting task 'WAPP spectral observation' 2008-Dec-13 17:54:56 LOG5 begin_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2008-Dec-13 17:54:56 LOG5 log_alfabeam: Parameters: 22.81722222222222 14.435916666666664 22.994868 2008.9548157971456 -8.600101 2008-Dec-13 17:54:56 LOG4 log_alfabeam: ALFABEAM 0 22.817222222222224 14.435916666666664 2008-Dec-13 17:54:56 LOG4 log_alfabeam: ALFABEAM 1 22.817006640729037 14.536576948696879 2008-Dec-13 17:54:56 LOG4 log_alfabeam: ALFABEAM 2 22.811377541377535 14.471179321434091 2008-Dec-13 17:54:56 LOG4 log_alfabeam: ALFABEAM 3 22.811616686669765 14.369832421713321 2008-Dec-13 17:54:56 LOG4 log_alfabeam: ALFABEAM 4 22.817584316495989 14.334759662213278 2008-Dec-13 17:54:56 LOG4 log_alfabeam: ALFABEAM 5 22.823093330271103 14.402463473110391 2008-Dec-13 17:54:56 LOG4 log_alfabeam: ALFABEAM 6 22.822755665907174 14.502941729950944 2008-Dec-13 17:54:56 INFO2 take_data: Starting WAPP scan: 834800031 2008-Dec-13 17:54:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Dec-13 17:54:56 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Dec-13 17:54:56 LOG5 begin_task: Level: (5) ID = <10041> Status = 0 0 0 0 ok 2008-Dec-13 17:54:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Dec-13 17:54:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2008-Dec-13 17:54:56 LOG4 check_wapp_levels: WAPP-1 power levels: 0.930 0.899 1.090 0.987 2008-Dec-13 17:54:56 LOG4 check_wapp_levels: WAPP-2 power levels: 0.978 0.947 1.062 1.084 2008-Dec-13 17:54:56 LOG4 check_wapp_levels: WAPP-3 power levels: 1.046 1.079 1.073 0.952 2008-Dec-13 17:54:56 LOG4 check_wapp_levels: WAPP-4 power levels: 0.908 0.100 1.005 0.110 2008-Dec-13 17:54:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 78897.00 2008-Dec-13 17:55:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.112704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Dec-13 17:55:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.112704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 17:55:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.112704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 17:55:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.112704 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Dec-13 17:55:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.112704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 17:55:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.112704 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Dec-13 17:55:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.112704 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Dec-13 17:55:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.112704 MHz Flip = 1 Band = 0 Mixer = 1990.000000 MHz 2008-Dec-13 17:55:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.112704 MHz Flip = 1 Band = 0 Mixer = 2000.000000 MHz 2008-Dec-13 17:55:02 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.090 (still bad) 2008-Dec-13 17:55:02 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Dec-13 17:55:02 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Dec-13 17:55:02 LOG5 end_task: Level: (5) ID = <10041> Status = 0 0 0 0 ok 2008-Dec-13 17:55:02 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Dec-13 17:55:02 LOG5 end_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2008-Dec-13 17:55:02 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Dec-13 17:55:02 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Dec-13 17:55:02 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Dec-13 17:55:02 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Dec-13 17:55:02 LOG5 begin_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2008-Dec-13 17:55:03 LOG3 CALCONTROL-caltrig: Software trigger 2008-Dec-13 17:55:03 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Dec-13 17:55:03 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Dec-13 17:55:03 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Dec-13 17:55:03 LOG5 end_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2008-Dec-13 17:55:03 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Dec-13 17:55:03 LOG4 take_data: Calling 'take_data 5 5 CAL OFF -' 2008-Dec-13 17:55:03 START begin_task: Starting task 'WAPP spectral observation' 2008-Dec-13 17:55:03 LOG5 begin_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2008-Dec-13 17:55:03 LOG5 log_alfabeam: Parameters: 22.81722222222222 14.435916666666664 22.996818 2008.9548160189622 -8.600101 2008-Dec-13 17:55:03 LOG4 log_alfabeam: ALFABEAM 0 22.817222222222235 14.435916666666666 2008-Dec-13 17:55:03 LOG4 log_alfabeam: ALFABEAM 1 22.817041683667235 14.536592457586698 2008-Dec-13 17:55:03 LOG4 log_alfabeam: ALFABEAM 2 22.811389916567670 14.471607913036040 2008-Dec-13 17:55:03 LOG4 log_alfabeam: ALFABEAM 3 22.811593732253272 14.370246052380457 2008-Dec-13 17:55:03 LOG4 log_alfabeam: ALFABEAM 4 22.817548647196958 14.334734997682180 2008-Dec-13 17:55:03 LOG4 log_alfabeam: ALFABEAM 5 22.823081485983451 14.402026849480963 2008-Dec-13 17:55:03 LOG4 log_alfabeam: ALFABEAM 6 22.822779201485016 14.502530204817051 2008-Dec-13 17:55:03 INFO2 take_data: Starting WAPP scan: 834800032 2008-Dec-13 17:55:03 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Dec-13 17:55:03 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Dec-13 17:55:03 LOG5 begin_task: Level: (5) ID = <10044> Status = 0 0 0 0 ok 2008-Dec-13 17:55:03 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Dec-13 17:55:03 INFO1 WAPP=1+2+3+4-start_spectra: start sec 78904.00 2008-Dec-13 17:55:08 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.535 (still bad) 2008-Dec-13 17:55:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.112704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Dec-13 17:55:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.112704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 17:55:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.112704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 17:55:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.112704 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Dec-13 17:55:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.112704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 17:55:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.112704 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Dec-13 17:55:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.112704 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Dec-13 17:55:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.112704 MHz Flip = 1 Band = 0 Mixer = 1990.000000 MHz 2008-Dec-13 17:55:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.112704 MHz Flip = 1 Band = 0 Mixer = 2000.000000 MHz 2008-Dec-13 17:55:09 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Dec-13 17:55:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Dec-13 17:55:09 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Dec-13 17:55:09 LOG5 end_task: Level: (5) ID = <10044> Status = 0 0 0 0 ok 2008-Dec-13 17:55:09 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Dec-13 17:55:09 LOG5 end_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2008-Dec-13 17:55:09 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Dec-13 17:55:09 STOP finish_task: Finishing task 'WAPP calibration' 2008-Dec-13 17:55:09 LOG5 finish_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2008-Dec-13 17:55:09 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Dec-13 17:55:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-13 17:55:09 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Dec-13 17:55:09 LOG5 end_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2008-Dec-13 17:55:10 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Dec-13 17:55:10 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 32.14 and ZA = 4.55 2008-Dec-13 17:55:10 LOG3 track_source: Calling 'track_source AGES7448_p2_143 32.14 4.5525632714 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Dec-13 17:55:10 START begin_task: Starting task 'sending tracking commands' 2008-Dec-13 17:55:10 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2008-Dec-13 17:55:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7448_p2_143} INFO {Slewing to source 'AGES7448_p2_143' ...} 2008-Dec-13 17:55:10 INFO1 track_source: Starting to track AGES7448_p2_143 2008-Dec-13 17:55:10 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7448_p2_143" 2008-Dec-13 17:55:10 LOG3 vw_send: To DATATAKING: set ra 32.14 2008-Dec-13 17:55:10 LOG3 vw_send: To DATATAKING: set dec 4.5525632714 2008-Dec-13 17:55:10 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Dec-13 17:55:10 LOG3 vw_send: To DATATAKING: pnt tr 32.14 4.5525632714 -CF 2008-Dec-13 17:55:10 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Dec-13 17:55:10 STOP finish_task: Finishing task 'sending tracking commands' 2008-Dec-13 17:55:10 LOG5 finish_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2008-Dec-13 17:55:10 INFO2 finish_task: DONE finished sending: tracking commands 2008-Dec-13 17:55:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-13 17:55:10 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Dec-13 17:55:10 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2008-Dec-13 17:55:10 LOG1 fixed_driftmap: Parameters: HA = +00:09:59.9 Start = 23:00:26.9 LST = 22:59:55.6 diff = 31.3 secs 2008-Dec-13 17:55:10 INFO2 fixed_driftmap: Waiting 29.3 seconds for RA 22:50:27 2008-Dec-13 17:55:10 INFO2 lstwait: Waiting for 29.2 secs from LST 22:59:56 to LST 23:00:25 ... 2008-Dec-13 17:55:10 LOG4 send_obs_status: To obs_status: <1> TASKTIME 29.223468302266678 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Dec-13 17:55:10 START begin_task: Starting task 'waiting on wait on LST' 2008-Dec-13 17:55:10 LOG5 begin_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2008-Dec-13 17:55:10 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7448_p2_143" 2008-Dec-13 17:55:10 LOG4 got_cormsg: From DATATAKING: set ra 32.14 2008-Dec-13 17:55:10 LOG4 got_cormsg: From DATATAKING: set dec 4.5525632714 2008-Dec-13 17:55:10 LOG4 got_cormsg: From DATATAKING: vw% 32.14 2008-Dec-13 17:55:10 LOG4 got_cormsg: From DATATAKING: vw% 4.5525632714 2008-Dec-13 17:55:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 17:55:10 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Dec-13 17:55:10 LOG4 got_cormsg: From DATATAKING: pnt tr 32.14 4.5525632714 -CF 2008-Dec-13 17:55:10 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Dec-13 17:55:10 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Dec-13 17:55:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 17:55:14 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2008-Dec-13 17:55:39 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Dec-13 17:55:39 LOG5 end_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2008-Dec-13 17:55:39 LOG4 lstwait: Finished waiting 0.78 seconds late 2008-Dec-13 17:55:39 INFO3 lstwait: Finished waiting 2008-Dec-13 17:55:39 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Dec-13 17:55:39 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Dec-13 17:55:39 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Dec-13 17:55:39 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Dec-13 17:55:39 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Dec-13 17:55:39 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ -' 2008-Dec-13 17:55:39 START begin_task: Starting task 'WAPP spectral observation' 2008-Dec-13 17:55:39 LOG5 begin_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2008-Dec-13 17:55:39 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Dec-13 17:55:39 INFO2 take_data: Starting WAPP scan: 834800033 2008-Dec-13 17:55:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Dec-13 17:55:40 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Dec-13 17:55:40 LOG5 begin_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2008-Dec-13 17:55:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Dec-13 17:55:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 78941.00 2008-Dec-13 17:55:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.112704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Dec-13 17:55:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.112704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 17:55:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.112704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 17:55:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.112704 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Dec-13 17:55:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.112704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 17:55:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.112704 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Dec-13 17:55:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.112704 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Dec-13 17:55:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.112704 MHz Flip = 1 Band = 0 Mixer = 1990.000000 MHz 2008-Dec-13 17:55:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.112704 MHz Flip = 1 Band = 0 Mixer = 2000.000000 MHz 2008-Dec-13 17:55:42 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.125 (still bad) 2008-Dec-13 17:55:44 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2008-Dec-13 17:55:46 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2008-Dec-13 17:55:48 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2008-Dec-13 17:55:50 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.130 (still bad) 2008-Dec-13 17:55:52 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.183 (still bad) 2008-Dec-13 17:55:54 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.277 (still bad) 2008-Dec-13 17:55:56 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.389 (still bad) 2008-Dec-13 17:55:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2008-Dec-13 17:55:58 LOG4 check_wapp_levels: WAPP-1 power levels: 0.958 0.910 1.086 0.989 2008-Dec-13 17:55:58 LOG4 check_wapp_levels: WAPP-2 power levels: 0.980 0.944 1.093 1.123 2008-Dec-13 17:55:58 LOG4 check_wapp_levels: WAPP-3 power levels: 1.451 1.520 1.084 0.962 2008-Dec-13 17:55:58 LOG4 check_wapp_levels: WAPP-4 power levels: 0.923 0.102 1.016 0.113 2008-Dec-13 17:56:00 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.645 (still bad) 2008-Dec-13 17:56:02 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.717 (still bad) 2008-Dec-13 17:56:04 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.730 (still bad) 2008-Dec-13 17:56:06 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.686 (still bad) 2008-Dec-13 17:56:08 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.566 (still bad) 2008-Dec-13 17:56:10 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.422 (still bad) 2008-Dec-13 17:56:12 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.291 (still bad) 2008-Dec-13 17:56:14 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.184 (still bad) 2008-Dec-13 17:56:16 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.184 (still bad) 2008-Dec-13 17:56:18 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.247 (still bad) 2008-Dec-13 17:56:20 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.305 (still bad) 2008-Dec-13 17:56:22 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.358 (still bad) 2008-Dec-13 17:56:24 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.387 (still bad) 2008-Dec-13 17:56:26 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.383 (still bad) 2008-Dec-13 17:56:28 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.352 (still bad) 2008-Dec-13 17:56:30 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.305 (still bad) 2008-Dec-13 17:56:32 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.234 (still bad) 2008-Dec-13 17:56:34 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.182 (still bad) 2008-Dec-13 17:56:36 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.155 (still bad) 2008-Dec-13 17:56:38 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.150 (still bad) 2008-Dec-13 17:56:40 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.169 (still bad) 2008-Dec-13 17:56:42 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.202 (still bad) 2008-Dec-13 17:56:44 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.211 (still bad) 2008-Dec-13 17:56:46 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.212 (still bad) 2008-Dec-13 17:56:49 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.199 (still bad) 2008-Dec-13 17:56:51 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.174 (still bad) 2008-Dec-13 17:56:53 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.152 (still bad) 2008-Dec-13 17:56:55 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.132 (still bad) 2008-Dec-13 17:56:57 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.127 (still bad) 2008-Dec-13 17:56:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2008-Dec-13 17:56:59 LOG4 check_wapp_levels: WAPP-1 power levels: 0.950 0.903 1.096 0.999 2008-Dec-13 17:56:59 LOG4 check_wapp_levels: WAPP-2 power levels: 0.983 0.944 1.101 1.128 2008-Dec-13 17:56:59 LOG4 check_wapp_levels: WAPP-3 power levels: 1.064 1.105 1.069 0.949 2008-Dec-13 17:56:59 LOG4 check_wapp_levels: WAPP-4 power levels: 0.923 0.102 1.014 0.112 2008-Dec-13 17:57:01 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.131 (still bad) 2008-Dec-13 17:57:03 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.130 (still bad) 2008-Dec-13 17:57:05 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.128 (still bad) 2008-Dec-13 17:57:07 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.126 (still bad) 2008-Dec-13 17:57:09 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2008-Dec-13 17:57:11 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2008-Dec-13 17:57:13 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2008-Dec-13 17:57:15 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2008-Dec-13 17:57:17 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2008-Dec-13 17:57:19 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2008-Dec-13 17:57:21 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2008-Dec-13 17:57:23 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2008-Dec-13 17:57:25 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2008-Dec-13 17:57:27 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2008-Dec-13 17:57:29 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2008-Dec-13 17:57:31 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.120 (still bad) 2008-Dec-13 17:57:33 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2008-Dec-13 17:57:35 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2008-Dec-13 17:57:37 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2008-Dec-13 17:57:39 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2008-Dec-13 17:57:41 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2008-Dec-13 17:57:43 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2008-Dec-13 17:57:45 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2008-Dec-13 17:57:47 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2008-Dec-13 17:57:49 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2008-Dec-13 17:57:51 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2008-Dec-13 17:57:53 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2008-Dec-13 17:57:55 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2008-Dec-13 17:57:57 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2008-Dec-13 17:57:59 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2008-Dec-13 17:58:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2008-Dec-13 17:58:01 LOG4 check_wapp_levels: WAPP-1 power levels: 0.950 0.906 1.089 0.992 2008-Dec-13 17:58:01 LOG4 check_wapp_levels: WAPP-2 power levels: 0.986 0.943 1.085 1.113 2008-Dec-13 17:58:01 LOG4 check_wapp_levels: WAPP-3 power levels: 1.064 1.106 1.067 0.951 2008-Dec-13 17:58:01 LOG4 check_wapp_levels: WAPP-4 power levels: 0.923 0.102 1.016 0.112 2008-Dec-13 17:58:03 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2008-Dec-13 17:58:05 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2008-Dec-13 17:58:07 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.120 (still bad) 2008-Dec-13 17:58:09 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2008-Dec-13 17:58:12 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2008-Dec-13 17:58:14 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2008-Dec-13 17:58:16 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2008-Dec-13 17:58:18 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2008-Dec-13 17:58:20 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2008-Dec-13 17:58:22 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2008-Dec-13 17:58:24 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2008-Dec-13 17:58:26 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2008-Dec-13 17:58:28 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2008-Dec-13 17:58:30 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2008-Dec-13 17:58:32 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2008-Dec-13 17:58:34 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2008-Dec-13 17:58:36 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2008-Dec-13 17:58:38 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2008-Dec-13 17:58:40 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2008-Dec-13 17:58:42 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2008-Dec-13 17:58:44 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2008-Dec-13 17:58:46 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2008-Dec-13 17:58:48 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2008-Dec-13 17:58:50 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2008-Dec-13 17:58:52 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2008-Dec-13 17:58:54 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2008-Dec-13 17:58:56 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2008-Dec-13 17:58:58 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2008-Dec-13 17:59:00 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2008-Dec-13 17:59:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2008-Dec-13 17:59:02 LOG4 check_wapp_levels: WAPP-1 power levels: 0.943 0.899 1.081 0.985 2008-Dec-13 17:59:02 LOG4 check_wapp_levels: WAPP-2 power levels: 0.978 0.941 1.073 1.108 2008-Dec-13 17:59:02 LOG4 check_wapp_levels: WAPP-3 power levels: 1.057 1.102 1.065 0.947 2008-Dec-13 17:59:02 LOG4 check_wapp_levels: WAPP-4 power levels: 0.919 0.102 1.012 0.112 2008-Dec-13 17:59:04 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2008-Dec-13 17:59:06 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2008-Dec-13 17:59:08 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2008-Dec-13 17:59:10 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2008-Dec-13 17:59:12 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2008-Dec-13 17:59:14 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2008-Dec-13 17:59:16 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2008-Dec-13 17:59:18 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2008-Dec-13 17:59:20 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2008-Dec-13 17:59:22 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2008-Dec-13 17:59:24 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2008-Dec-13 17:59:26 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2008-Dec-13 17:59:28 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2008-Dec-13 17:59:30 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2008-Dec-13 17:59:32 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2008-Dec-13 17:59:34 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2008-Dec-13 17:59:36 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2008-Dec-13 17:59:38 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2008-Dec-13 17:59:41 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.127 (still bad) 2008-Dec-13 17:59:43 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2008-Dec-13 17:59:45 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2008-Dec-13 17:59:47 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2008-Dec-13 17:59:49 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2008-Dec-13 17:59:51 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2008-Dec-13 17:59:53 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2008-Dec-13 17:59:55 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2008-Dec-13 17:59:57 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2008-Dec-13 17:59:59 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2008-Dec-13 18:00:01 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2008-Dec-13 18:00:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2008-Dec-13 18:00:03 LOG4 check_wapp_levels: WAPP-1 power levels: 0.942 0.900 1.087 0.984 2008-Dec-13 18:00:03 LOG4 check_wapp_levels: WAPP-2 power levels: 0.979 0.942 1.078 1.109 2008-Dec-13 18:00:03 LOG4 check_wapp_levels: WAPP-3 power levels: 1.061 1.102 1.064 0.946 2008-Dec-13 18:00:03 LOG4 check_wapp_levels: WAPP-4 power levels: 0.921 0.102 1.012 0.112 2008-Dec-13 18:00:05 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2008-Dec-13 18:00:07 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2008-Dec-13 18:00:09 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2008-Dec-13 18:00:11 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2008-Dec-13 18:00:13 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2008-Dec-13 18:00:15 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2008-Dec-13 18:00:17 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2008-Dec-13 18:00:19 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2008-Dec-13 18:00:21 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2008-Dec-13 18:00:23 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2008-Dec-13 18:00:25 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2008-Dec-13 18:00:27 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2008-Dec-13 18:00:29 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2008-Dec-13 18:00:31 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2008-Dec-13 18:00:33 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2008-Dec-13 18:00:35 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2008-Dec-13 18:00:37 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2008-Dec-13 18:00:39 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2008-Dec-13 18:00:41 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2008-Dec-13 18:00:43 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2008-Dec-13 18:00:45 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2008-Dec-13 18:00:47 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.113 (still bad) 2008-Dec-13 18:00:49 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2008-Dec-13 18:00:51 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2008-Dec-13 18:00:53 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2008-Dec-13 18:00:55 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.120 (still bad) 2008-Dec-13 18:00:57 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2008-Dec-13 18:00:59 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2008-Dec-13 18:01:01 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2008-Dec-13 18:01:03 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2008-Dec-13 18:01:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2008-Dec-13 18:01:06 LOG4 check_wapp_levels: WAPP-1 power levels: 0.945 0.902 1.089 0.984 2008-Dec-13 18:01:06 LOG4 check_wapp_levels: WAPP-2 power levels: 0.981 0.941 1.083 1.114 2008-Dec-13 18:01:06 LOG4 check_wapp_levels: WAPP-3 power levels: 1.063 1.105 1.069 0.951 2008-Dec-13 18:01:06 LOG4 check_wapp_levels: WAPP-4 power levels: 0.922 0.102 1.015 0.112 2008-Dec-13 18:01:08 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2008-Dec-13 18:01:10 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2008-Dec-13 18:01:12 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2008-Dec-13 18:01:14 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2008-Dec-13 18:01:16 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.113 (still bad) 2008-Dec-13 18:01:18 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2008-Dec-13 18:01:20 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2008-Dec-13 18:01:22 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2008-Dec-13 18:01:24 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2008-Dec-13 18:01:26 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2008-Dec-13 18:01:28 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2008-Dec-13 18:01:30 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2008-Dec-13 18:01:32 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2008-Dec-13 18:01:34 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2008-Dec-13 18:01:36 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2008-Dec-13 18:01:38 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2008-Dec-13 18:01:40 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2008-Dec-13 18:01:42 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2008-Dec-13 18:01:44 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.123 (still bad) 2008-Dec-13 18:01:46 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.124 (still bad) 2008-Dec-13 18:01:48 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.126 (still bad) 2008-Dec-13 18:01:50 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.129 (still bad) 2008-Dec-13 18:01:52 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.130 (still bad) 2008-Dec-13 18:01:54 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.135 (still bad) 2008-Dec-13 18:01:56 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.158 (still bad) 2008-Dec-13 18:01:58 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.174 (still bad) 2008-Dec-13 18:02:00 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.179 (still bad) 2008-Dec-13 18:02:02 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.180 (still bad) 2008-Dec-13 18:02:04 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.163 (still bad) 2008-Dec-13 18:02:06 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.147 (still bad) 2008-Dec-13 18:02:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2008-Dec-13 18:02:08 LOG4 check_wapp_levels: WAPP-1 power levels: 0.965 0.917 1.141 1.030 2008-Dec-13 18:02:08 LOG4 check_wapp_levels: WAPP-2 power levels: 1.009 0.965 1.106 1.132 2008-Dec-13 18:02:08 LOG4 check_wapp_levels: WAPP-3 power levels: 1.077 1.112 1.082 0.959 2008-Dec-13 18:02:08 LOG4 check_wapp_levels: WAPP-4 power levels: 0.933 0.102 1.026 0.112 2008-Dec-13 18:02:10 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.123 (still bad) 2008-Dec-13 18:02:12 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.124 (still bad) 2008-Dec-13 18:02:14 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.125 (still bad) 2008-Dec-13 18:02:16 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.123 (still bad) 2008-Dec-13 18:02:18 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.134 (still bad) 2008-Dec-13 18:02:20 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.132 (still bad) 2008-Dec-13 18:02:22 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.123 (still bad) 2008-Dec-13 18:02:24 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.123 (still bad) 2008-Dec-13 18:02:26 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.124 (still bad) 2008-Dec-13 18:02:28 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.123 (still bad) 2008-Dec-13 18:02:30 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.124 (still bad) 2008-Dec-13 18:02:32 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.135 (still bad) 2008-Dec-13 18:02:35 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.124 (still bad) 2008-Dec-13 18:02:37 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.123 (still bad) 2008-Dec-13 18:02:39 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.124 (still bad) 2008-Dec-13 18:02:41 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.123 (still bad) 2008-Dec-13 18:02:43 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2008-Dec-13 18:02:45 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.132 (still bad) 2008-Dec-13 18:02:47 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2008-Dec-13 18:02:49 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2008-Dec-13 18:02:51 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2008-Dec-13 18:02:53 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.120 (still bad) 2008-Dec-13 18:02:55 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2008-Dec-13 18:02:57 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.128 (still bad) 2008-Dec-13 18:02:59 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2008-Dec-13 18:03:01 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2008-Dec-13 18:03:03 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2008-Dec-13 18:03:05 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2008-Dec-13 18:03:07 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2008-Dec-13 18:03:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2008-Dec-13 18:03:09 LOG4 check_wapp_levels: WAPP-1 power levels: 0.962 0.918 1.104 0.997 2008-Dec-13 18:03:09 LOG4 check_wapp_levels: WAPP-2 power levels: 1.026 0.980 1.099 1.126 2008-Dec-13 18:03:09 LOG4 check_wapp_levels: WAPP-3 power levels: 1.077 1.113 1.083 0.965 2008-Dec-13 18:03:09 LOG4 check_wapp_levels: WAPP-4 power levels: 0.930 0.102 1.023 0.112 2008-Dec-13 18:03:11 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2008-Dec-13 18:03:13 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2008-Dec-13 18:03:15 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2008-Dec-13 18:03:17 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2008-Dec-13 18:03:19 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2008-Dec-13 18:03:21 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.125 (still bad) 2008-Dec-13 18:03:23 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2008-Dec-13 18:03:25 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2008-Dec-13 18:03:27 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2008-Dec-13 18:03:29 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2008-Dec-13 18:03:31 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2008-Dec-13 18:03:33 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2008-Dec-13 18:03:35 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2008-Dec-13 18:03:37 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2008-Dec-13 18:03:39 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2008-Dec-13 18:03:41 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2008-Dec-13 18:03:43 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2008-Dec-13 18:03:45 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2008-Dec-13 18:03:47 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2008-Dec-13 18:03:49 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2008-Dec-13 18:03:51 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2008-Dec-13 18:03:53 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2008-Dec-13 18:03:56 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2008-Dec-13 18:03:58 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2008-Dec-13 18:04:00 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2008-Dec-13 18:04:02 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2008-Dec-13 18:04:04 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2008-Dec-13 18:04:06 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2008-Dec-13 18:04:08 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2008-Dec-13 18:04:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2008-Dec-13 18:04:10 LOG4 check_wapp_levels: WAPP-1 power levels: 0.948 0.904 1.087 0.985 2008-Dec-13 18:04:10 LOG4 check_wapp_levels: WAPP-2 power levels: 1.001 0.954 1.081 1.111 2008-Dec-13 18:04:10 LOG4 check_wapp_levels: WAPP-3 power levels: 1.064 1.098 1.070 0.951 2008-Dec-13 18:04:10 LOG4 check_wapp_levels: WAPP-4 power levels: 0.923 0.102 1.014 0.112 2008-Dec-13 18:04:12 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2008-Dec-13 18:04:14 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2008-Dec-13 18:04:16 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2008-Dec-13 18:04:18 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2008-Dec-13 18:04:20 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2008-Dec-13 18:04:22 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2008-Dec-13 18:04:24 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2008-Dec-13 18:04:26 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2008-Dec-13 18:04:28 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2008-Dec-13 18:04:30 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2008-Dec-13 18:04:32 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2008-Dec-13 18:04:34 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2008-Dec-13 18:04:36 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2008-Dec-13 18:04:38 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2008-Dec-13 18:04:40 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2008-Dec-13 18:04:42 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2008-Dec-13 18:04:44 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2008-Dec-13 18:04:46 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2008-Dec-13 18:04:48 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2008-Dec-13 18:04:50 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2008-Dec-13 18:04:52 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2008-Dec-13 18:04:54 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2008-Dec-13 18:04:56 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2008-Dec-13 18:04:58 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2008-Dec-13 18:05:00 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2008-Dec-13 18:05:02 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2008-Dec-13 18:05:04 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2008-Dec-13 18:05:06 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2008-Dec-13 18:05:08 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2008-Dec-13 18:05:10 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2008-Dec-13 18:05:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2008-Dec-13 18:05:12 LOG4 check_wapp_levels: WAPP-1 power levels: 0.945 0.904 1.087 0.985 2008-Dec-13 18:05:12 LOG4 check_wapp_levels: WAPP-2 power levels: 0.981 0.937 1.079 1.108 2008-Dec-13 18:05:12 LOG4 check_wapp_levels: WAPP-3 power levels: 1.060 1.098 1.067 0.947 2008-Dec-13 18:05:12 LOG4 check_wapp_levels: WAPP-4 power levels: 0.919 0.102 1.010 0.112 2008-Dec-13 18:05:14 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2008-Dec-13 18:05:16 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2008-Dec-13 18:05:18 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2008-Dec-13 18:05:20 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2008-Dec-13 18:05:23 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2008-Dec-13 18:05:25 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2008-Dec-13 18:05:27 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.111 (still bad) 2008-Dec-13 18:05:29 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2008-Dec-13 18:05:31 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2008-Dec-13 18:05:33 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2008-Dec-13 18:05:35 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2008-Dec-13 18:05:37 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2008-Dec-13 18:05:39 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2008-Dec-13 18:05:41 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2008-Dec-13 18:05:43 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2008-Dec-13 18:05:45 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2008-Dec-13 18:05:47 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2008-Dec-13 18:05:49 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2008-Dec-13 18:05:51 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2008-Dec-13 18:05:53 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2008-Dec-13 18:05:55 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2008-Dec-13 18:05:57 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.120 (still bad) 2008-Dec-13 18:05:59 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2008-Dec-13 18:06:01 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2008-Dec-13 18:06:03 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2008-Dec-13 18:06:05 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2008-Dec-13 18:06:07 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2008-Dec-13 18:06:09 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2008-Dec-13 18:06:11 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2008-Dec-13 18:06:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2008-Dec-13 18:06:13 LOG4 check_wapp_levels: WAPP-1 power levels: 0.952 0.909 1.084 0.979 2008-Dec-13 18:06:13 LOG4 check_wapp_levels: WAPP-2 power levels: 0.980 0.938 1.079 1.111 2008-Dec-13 18:06:13 LOG4 check_wapp_levels: WAPP-3 power levels: 1.064 1.099 1.077 0.956 2008-Dec-13 18:06:13 LOG4 check_wapp_levels: WAPP-4 power levels: 0.921 0.102 1.011 0.112 2008-Dec-13 18:06:15 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2008-Dec-13 18:06:17 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2008-Dec-13 18:06:19 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2008-Dec-13 18:06:21 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2008-Dec-13 18:06:23 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2008-Dec-13 18:06:25 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2008-Dec-13 18:06:27 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2008-Dec-13 18:06:29 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.109 (still bad) 2008-Dec-13 18:06:31 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2008-Dec-13 18:06:33 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2008-Dec-13 18:06:35 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2008-Dec-13 18:06:37 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.108 (still bad) 2008-Dec-13 18:06:39 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.111 (still bad) 2008-Dec-13 18:06:41 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2008-Dec-13 18:06:44 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2008-Dec-13 18:06:46 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2008-Dec-13 18:06:48 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.108 (still bad) 2008-Dec-13 18:06:50 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2008-Dec-13 18:06:52 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2008-Dec-13 18:06:54 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.108 (still bad) 2008-Dec-13 18:06:56 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.110 (still bad) 2008-Dec-13 18:06:58 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2008-Dec-13 18:07:00 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.110 (still bad) 2008-Dec-13 18:07:02 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.109 (still bad) 2008-Dec-13 18:07:04 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.109 (still bad) 2008-Dec-13 18:07:06 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.108 (still bad) 2008-Dec-13 18:07:08 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2008-Dec-13 18:07:10 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2008-Dec-13 18:07:12 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2008-Dec-13 18:07:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.101 < 0.75)! 2008-Dec-13 18:07:14 LOG4 check_wapp_levels: WAPP-1 power levels: 0.939 0.901 1.078 0.974 2008-Dec-13 18:07:14 LOG4 check_wapp_levels: WAPP-2 power levels: 0.979 0.939 1.075 1.108 2008-Dec-13 18:07:14 LOG4 check_wapp_levels: WAPP-3 power levels: 1.058 1.095 1.064 0.945 2008-Dec-13 18:07:14 LOG4 check_wapp_levels: WAPP-4 power levels: 0.915 0.101 1.005 0.112 2008-Dec-13 18:07:16 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2008-Dec-13 18:07:18 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.109 (still bad) 2008-Dec-13 18:07:20 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.108 (still bad) 2008-Dec-13 18:07:22 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2008-Dec-13 18:07:24 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2008-Dec-13 18:07:26 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.107 (still bad) 2008-Dec-13 18:07:28 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.108 (still bad) 2008-Dec-13 18:07:30 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.118 (still bad) 2008-Dec-13 18:07:32 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.108 (still bad) 2008-Dec-13 18:07:34 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.108 (still bad) 2008-Dec-13 18:07:36 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2008-Dec-13 18:07:38 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.123 (still bad) 2008-Dec-13 18:07:40 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.107 (still bad) 2008-Dec-13 18:07:42 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.106 (still bad) 2008-Dec-13 18:07:44 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2008-Dec-13 18:07:46 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.108 (still bad) 2008-Dec-13 18:07:48 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2008-Dec-13 18:07:50 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.108 (still bad) 2008-Dec-13 18:07:52 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.109 (still bad) 2008-Dec-13 18:07:54 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.108 (still bad) 2008-Dec-13 18:07:56 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.108 (still bad) 2008-Dec-13 18:07:58 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.109 (still bad) 2008-Dec-13 18:08:00 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2008-Dec-13 18:08:02 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.109 (still bad) 2008-Dec-13 18:08:05 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2008-Dec-13 18:08:07 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.109 (still bad) 2008-Dec-13 18:08:09 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.110 (still bad) 2008-Dec-13 18:08:11 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2008-Dec-13 18:08:13 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2008-Dec-13 18:08:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2008-Dec-13 18:08:15 LOG4 check_wapp_levels: WAPP-1 power levels: 0.941 0.901 1.081 0.975 2008-Dec-13 18:08:15 LOG4 check_wapp_levels: WAPP-2 power levels: 0.976 0.934 1.076 1.110 2008-Dec-13 18:08:15 LOG4 check_wapp_levels: WAPP-3 power levels: 1.056 1.098 1.065 0.947 2008-Dec-13 18:08:15 LOG4 check_wapp_levels: WAPP-4 power levels: 0.921 0.102 1.013 0.112 2008-Dec-13 18:08:17 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2008-Dec-13 18:08:19 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.110 (still bad) 2008-Dec-13 18:08:21 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.110 (still bad) 2008-Dec-13 18:08:23 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.109 (still bad) 2008-Dec-13 18:08:25 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2008-Dec-13 18:08:27 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.108 (still bad) 2008-Dec-13 18:08:29 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2008-Dec-13 18:08:31 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2008-Dec-13 18:08:33 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.110 (still bad) 2008-Dec-13 18:08:35 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2008-Dec-13 18:08:37 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2008-Dec-13 18:08:39 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2008-Dec-13 18:08:41 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2008-Dec-13 18:08:43 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2008-Dec-13 18:08:45 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.133 (still bad) 2008-Dec-13 18:08:47 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.134 (still bad) 2008-Dec-13 18:08:49 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.135 (still bad) 2008-Dec-13 18:08:51 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.187 (still bad) 2008-Dec-13 18:08:53 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.125 (still bad) 2008-Dec-13 18:08:55 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2008-Dec-13 18:08:57 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2008-Dec-13 18:08:59 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2008-Dec-13 18:09:01 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2008-Dec-13 18:09:03 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2008-Dec-13 18:09:05 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2008-Dec-13 18:09:07 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.112 (still bad) 2008-Dec-13 18:09:09 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2008-Dec-13 18:09:11 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.117 (still bad) 2008-Dec-13 18:09:13 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.118 (still bad) 2008-Dec-13 18:09:15 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2008-Dec-13 18:09:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2008-Dec-13 18:09:17 LOG4 check_wapp_levels: WAPP-1 power levels: 0.941 0.903 1.082 0.976 2008-Dec-13 18:09:17 LOG4 check_wapp_levels: WAPP-2 power levels: 0.983 0.938 1.086 1.120 2008-Dec-13 18:09:17 LOG4 check_wapp_levels: WAPP-3 power levels: 1.067 1.111 1.067 0.948 2008-Dec-13 18:09:17 LOG4 check_wapp_levels: WAPP-4 power levels: 0.919 0.102 1.011 0.112 2008-Dec-13 18:09:19 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.121 (still bad) 2008-Dec-13 18:09:21 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.126 (still bad) 2008-Dec-13 18:09:23 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.119 (still bad) 2008-Dec-13 18:09:25 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.114 (still bad) 2008-Dec-13 18:09:27 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2008-Dec-13 18:09:30 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2008-Dec-13 18:09:32 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2008-Dec-13 18:09:34 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2008-Dec-13 18:09:36 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2008-Dec-13 18:09:38 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2008-Dec-13 18:09:40 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2008-Dec-13 18:09:42 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.117 (still bad) 2008-Dec-13 18:09:44 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2008-Dec-13 18:09:46 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2008-Dec-13 18:09:48 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2008-Dec-13 18:09:50 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2008-Dec-13 18:09:52 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2008-Dec-13 18:09:54 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2008-Dec-13 18:09:56 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2008-Dec-13 18:09:58 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2008-Dec-13 18:10:00 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2008-Dec-13 18:10:02 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2008-Dec-13 18:10:04 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2008-Dec-13 18:10:06 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2008-Dec-13 18:10:08 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.142 (still bad) 2008-Dec-13 18:10:10 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2008-Dec-13 18:10:12 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2008-Dec-13 18:10:14 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.113 (still bad) 2008-Dec-13 18:10:16 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.115 (still bad) 2008-Dec-13 18:10:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.101 < 0.75)! 2008-Dec-13 18:10:18 LOG4 check_wapp_levels: WAPP-1 power levels: 0.941 0.902 1.080 0.981 2008-Dec-13 18:10:18 LOG4 check_wapp_levels: WAPP-2 power levels: 0.981 0.940 1.076 1.114 2008-Dec-13 18:10:18 LOG4 check_wapp_levels: WAPP-3 power levels: 1.060 1.101 1.067 0.949 2008-Dec-13 18:10:18 LOG4 check_wapp_levels: WAPP-4 power levels: 0.921 0.101 1.012 0.112 2008-Dec-13 18:10:20 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.114 (still bad) 2008-Dec-13 18:10:22 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2008-Dec-13 18:10:24 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2008-Dec-13 18:10:26 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.112 (still bad) 2008-Dec-13 18:10:28 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2008-Dec-13 18:10:30 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.112 (still bad) 2008-Dec-13 18:10:32 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2008-Dec-13 18:10:34 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.120 (still bad) 2008-Dec-13 18:10:36 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2008-Dec-13 18:10:38 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2008-Dec-13 18:10:40 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2008-Dec-13 18:10:42 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2008-Dec-13 18:10:44 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2008-Dec-13 18:10:46 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2008-Dec-13 18:10:48 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2008-Dec-13 18:10:50 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2008-Dec-13 18:10:52 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2008-Dec-13 18:10:54 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2008-Dec-13 18:10:56 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2008-Dec-13 18:10:58 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2008-Dec-13 18:11:01 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2008-Dec-13 18:11:03 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2008-Dec-13 18:11:05 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2008-Dec-13 18:11:07 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2008-Dec-13 18:11:09 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2008-Dec-13 18:11:11 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2008-Dec-13 18:11:13 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2008-Dec-13 18:11:15 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2008-Dec-13 18:11:17 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2008-Dec-13 18:11:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2008-Dec-13 18:11:19 LOG4 check_wapp_levels: WAPP-1 power levels: 0.938 0.902 1.078 0.975 2008-Dec-13 18:11:19 LOG4 check_wapp_levels: WAPP-2 power levels: 0.976 0.936 1.074 1.113 2008-Dec-13 18:11:19 LOG4 check_wapp_levels: WAPP-3 power levels: 1.057 1.094 1.067 0.949 2008-Dec-13 18:11:19 LOG4 check_wapp_levels: WAPP-4 power levels: 0.917 0.102 1.007 0.112 2008-Dec-13 18:11:21 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2008-Dec-13 18:11:23 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.124 (still bad) 2008-Dec-13 18:11:25 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2008-Dec-13 18:11:27 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2008-Dec-13 18:11:29 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2008-Dec-13 18:11:31 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.125 (still bad) 2008-Dec-13 18:11:33 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2008-Dec-13 18:11:35 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2008-Dec-13 18:11:37 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2008-Dec-13 18:11:39 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2008-Dec-13 18:11:41 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.115 (still bad) 2008-Dec-13 18:11:43 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2008-Dec-13 18:11:45 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2008-Dec-13 18:11:47 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.131 (still bad) 2008-Dec-13 18:11:49 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2008-Dec-13 18:11:51 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2008-Dec-13 18:11:53 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.120 (still bad) 2008-Dec-13 18:11:55 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.114 (still bad) 2008-Dec-13 18:11:57 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.113 (still bad) 2008-Dec-13 18:11:59 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2008-Dec-13 18:12:01 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2008-Dec-13 18:12:03 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2008-Dec-13 18:12:05 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2008-Dec-13 18:12:07 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2008-Dec-13 18:12:09 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2008-Dec-13 18:12:11 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2008-Dec-13 18:12:13 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2008-Dec-13 18:12:15 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2008-Dec-13 18:12:17 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2008-Dec-13 18:12:19 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2008-Dec-13 18:12:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2008-Dec-13 18:12:21 LOG4 check_wapp_levels: WAPP-1 power levels: 0.939 0.902 1.076 0.977 2008-Dec-13 18:12:21 LOG4 check_wapp_levels: WAPP-2 power levels: 0.982 0.936 1.067 1.108 2008-Dec-13 18:12:21 LOG4 check_wapp_levels: WAPP-3 power levels: 1.059 1.097 1.073 0.953 2008-Dec-13 18:12:21 LOG4 check_wapp_levels: WAPP-4 power levels: 0.916 0.102 1.007 0.112 2008-Dec-13 18:12:23 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2008-Dec-13 18:12:26 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2008-Dec-13 18:12:28 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2008-Dec-13 18:12:30 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2008-Dec-13 18:12:32 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2008-Dec-13 18:12:34 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2008-Dec-13 18:12:36 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2008-Dec-13 18:12:38 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2008-Dec-13 18:12:40 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2008-Dec-13 18:12:42 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2008-Dec-13 18:12:44 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2008-Dec-13 18:12:46 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2008-Dec-13 18:12:48 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2008-Dec-13 18:12:50 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2008-Dec-13 18:12:52 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2008-Dec-13 18:12:54 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2008-Dec-13 18:12:56 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2008-Dec-13 18:12:58 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2008-Dec-13 18:13:00 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2008-Dec-13 18:13:02 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2008-Dec-13 18:13:04 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2008-Dec-13 18:13:06 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2008-Dec-13 18:13:08 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2008-Dec-13 18:13:10 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2008-Dec-13 18:13:12 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2008-Dec-13 18:13:14 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2008-Dec-13 18:13:16 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2008-Dec-13 18:13:18 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.208 (still bad) 2008-Dec-13 18:13:20 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.126 (still bad) 2008-Dec-13 18:13:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2008-Dec-13 18:13:22 LOG4 check_wapp_levels: WAPP-1 power levels: 0.983 0.903 1.084 0.985 2008-Dec-13 18:13:22 LOG4 check_wapp_levels: WAPP-2 power levels: 0.986 0.943 1.076 1.114 2008-Dec-13 18:13:22 LOG4 check_wapp_levels: WAPP-3 power levels: 1.066 1.132 1.078 0.959 2008-Dec-13 18:13:22 LOG4 check_wapp_levels: WAPP-4 power levels: 0.933 0.102 1.024 0.112 2008-Dec-13 18:13:24 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.120 (still bad) 2008-Dec-13 18:13:26 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2008-Dec-13 18:13:28 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.120 (still bad) 2008-Dec-13 18:13:30 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.120 (still bad) 2008-Dec-13 18:13:32 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2008-Dec-13 18:13:34 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.131 (still bad) 2008-Dec-13 18:13:36 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.124 (still bad) 2008-Dec-13 18:13:38 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2008-Dec-13 18:13:40 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2008-Dec-13 18:13:42 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2008-Dec-13 18:13:45 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2008-Dec-13 18:13:47 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.129 (still bad) 2008-Dec-13 18:13:49 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2008-Dec-13 18:13:51 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.124 (still bad) 2008-Dec-13 18:13:53 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.128 (still bad) 2008-Dec-13 18:13:55 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.127 (still bad) 2008-Dec-13 18:13:57 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.129 (still bad) 2008-Dec-13 18:13:59 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.127 (still bad) 2008-Dec-13 18:14:01 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.120 (still bad) 2008-Dec-13 18:14:03 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2008-Dec-13 18:14:05 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.117 (still bad) 2008-Dec-13 18:14:07 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.115 (still bad) 2008-Dec-13 18:14:09 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.115 (still bad) 2008-Dec-13 18:14:11 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.120 (still bad) 2008-Dec-13 18:14:13 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2008-Dec-13 18:14:15 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2008-Dec-13 18:14:17 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2008-Dec-13 18:14:19 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2008-Dec-13 18:14:21 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2008-Dec-13 18:14:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2008-Dec-13 18:14:23 LOG4 check_wapp_levels: WAPP-1 power levels: 0.989 0.919 1.090 0.990 2008-Dec-13 18:14:23 LOG4 check_wapp_levels: WAPP-2 power levels: 0.991 0.947 1.084 1.124 2008-Dec-13 18:14:23 LOG4 check_wapp_levels: WAPP-3 power levels: 1.072 1.119 1.077 0.959 2008-Dec-13 18:14:23 LOG4 check_wapp_levels: WAPP-4 power levels: 0.925 0.102 1.017 0.112 2008-Dec-13 18:14:25 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2008-Dec-13 18:14:27 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2008-Dec-13 18:14:29 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.120 (still bad) 2008-Dec-13 18:14:31 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2008-Dec-13 18:14:33 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2008-Dec-13 18:14:35 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.125 (still bad) 2008-Dec-13 18:14:37 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2008-Dec-13 18:14:39 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2008-Dec-13 18:14:41 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2008-Dec-13 18:14:43 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2008-Dec-13 18:14:45 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2008-Dec-13 18:14:47 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.153 (still bad) 2008-Dec-13 18:14:49 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2008-Dec-13 18:14:51 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2008-Dec-13 18:14:53 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2008-Dec-13 18:14:55 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2008-Dec-13 18:14:57 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2008-Dec-13 18:14:59 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.123 (still bad) 2008-Dec-13 18:15:01 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2008-Dec-13 18:15:03 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2008-Dec-13 18:15:05 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2008-Dec-13 18:15:08 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.114 (still bad) 2008-Dec-13 18:15:10 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2008-Dec-13 18:15:12 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.123 (still bad) 2008-Dec-13 18:15:14 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.114 (still bad) 2008-Dec-13 18:15:16 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2008-Dec-13 18:15:18 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2008-Dec-13 18:15:20 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.114 (still bad) 2008-Dec-13 18:15:22 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2008-Dec-13 18:15:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2008-Dec-13 18:15:24 LOG4 check_wapp_levels: WAPP-1 power levels: 0.977 0.914 1.087 0.984 2008-Dec-13 18:15:24 LOG4 check_wapp_levels: WAPP-2 power levels: 0.987 0.941 1.075 1.117 2008-Dec-13 18:15:24 LOG4 check_wapp_levels: WAPP-3 power levels: 1.073 1.118 1.083 0.964 2008-Dec-13 18:15:24 LOG4 check_wapp_levels: WAPP-4 power levels: 0.927 0.102 1.020 0.112 2008-Dec-13 18:15:26 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2008-Dec-13 18:15:28 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2008-Dec-13 18:15:30 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2008-Dec-13 18:15:32 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2008-Dec-13 18:15:34 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2008-Dec-13 18:15:36 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2008-Dec-13 18:15:38 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2008-Dec-13 18:15:40 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2008-Dec-13 18:15:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Dec-13 18:15:41 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Dec-13 18:15:41 LOG5 end_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2008-Dec-13 18:15:41 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Dec-13 18:15:41 LOG5 end_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2008-Dec-13 18:15:41 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Dec-13 18:15:41 LOG5 finish_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2008-Dec-13 18:15:41 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Dec-13 18:15:41 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Dec-13 18:15:41 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Dec-13 18:15:41 LOG5 end_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2008-Dec-13 18:15:41 COMMAND run_command_line: EXECUTING command 12: 'ENDIF' 2008-Dec-13 18:15:41 COMMAND run_command_line: EXECUTING command 15: 'IF LSTSLEW(AGES7448_p2_145) < 232326 THEN' 2008-Dec-13 18:15:42 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES7448_p2_145) < 232326 2008-Dec-13 18:15:42 INFO5 is_if_valid: Condition parsed as: 23.366926999999997 < 23.390555555555554 2008-Dec-13 18:15:42 COMMAND run_command_line: EXECUTING command 16: 'FIXEDDRIFT az=64.86 alfaangle=-39.7 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p2_145 ra=225000.00 dec=142300.00' 2008-Dec-13 18:15:42 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Dec-13 18:15:42 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.116 (still bad) 2008-Dec-13 18:15:42 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Dec-13 18:15:42 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 64.86 -39.7 hcorcal 5 tracking no first 1 AGES7448_p2_145 225000.00 142300.00 J 8500.0 Heliocentric velocity(optical)' 2008-Dec-13 18:15:42 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Dec-13 18:15:42 LOG5 begin_task: Level: (2) ID = <10049> Status = 0 0 0 0 ok 2008-Dec-13 18:15:42 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES7448_p2_143' 2008-Dec-13 18:15:42 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Dec-13 18:15:42 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES7448_p2_145} 2008-Dec-13 18:15:42 INFO3 fixed_driftmap: Sending telescope to Az = 64.86 and ZA = 8.83 2008-Dec-13 18:15:42 LOG3 track_source: Calling 'track_source AGES7448_p2_145 64.86 8.8302215151 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Dec-13 18:15:42 START begin_task: Starting task 'sending tracking commands' 2008-Dec-13 18:15:42 LOG5 begin_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2008-Dec-13 18:15:42 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7448_p2_145} INFO {Slewing to source 'AGES7448_p2_145' ...} 2008-Dec-13 18:15:42 INFO1 track_source: Starting to track AGES7448_p2_145 2008-Dec-13 18:15:42 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7448_p2_145" 2008-Dec-13 18:15:43 LOG3 vw_send: To DATATAKING: set ra 64.86 2008-Dec-13 18:15:43 LOG3 vw_send: To DATATAKING: set dec 8.8302215151 2008-Dec-13 18:15:43 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Dec-13 18:15:43 LOG3 vw_send: To DATATAKING: pnt tr 64.86 8.8302215151 -CF 2008-Dec-13 18:15:43 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Dec-13 18:15:43 STOP finish_task: Finishing task 'sending tracking commands' 2008-Dec-13 18:15:43 LOG5 finish_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2008-Dec-13 18:15:43 INFO2 finish_task: DONE finished sending: tracking commands 2008-Dec-13 18:15:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-13 18:15:43 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Dec-13 18:15:43 LOG5 end_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2008-Dec-13 18:15:43 START begin_task: Starting task 'rotate ALFA to -39.7 degrees' 2008-Dec-13 18:15:43 LOG5 begin_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2008-Dec-13 18:15:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -39.7 degrees ...} 2008-Dec-13 18:15:43 INFO2 rotate_alfa: ALFA commanded to -39.7 degrees 2008-Dec-13 18:15:43 LOG3 sock_errsend: To ALFAMOTOR: POSITION -39.7 REPLY 2008-Dec-13 18:15:43 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Dec-13 18:15:43 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Dec-13 18:15:43 LOG5 begin_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2008-Dec-13 18:15:43 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7448_p2_145" 2008-Dec-13 18:15:43 LOG4 got_cormsg: From DATATAKING: set ra 64.86 2008-Dec-13 18:15:43 LOG4 got_cormsg: From DATATAKING: set dec 8.8302215151 2008-Dec-13 18:15:43 LOG4 got_cormsg: From DATATAKING: vw% 64.86 2008-Dec-13 18:15:43 LOG4 got_cormsg: From DATATAKING: vw% 8.8302215151 2008-Dec-13 18:15:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 18:15:43 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Dec-13 18:15:43 LOG4 got_cormsg: From DATATAKING: pnt tr 64.86 8.8302215151 -CF 2008-Dec-13 18:15:43 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Dec-13 18:15:43 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Dec-13 18:15:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 18:16:01 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Dec-13 18:16:01 INFO3 alfa_motor: ALFA rotator in-position -39.70 degrees 2008-Dec-13 18:16:01 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Dec-13 18:16:01 LOG5 end_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2008-Dec-13 18:16:01 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Dec-13 18:16:01 STOP finish_task: Finishing task 'rotate ALFA to -39.7 degrees' 2008-Dec-13 18:16:01 LOG5 finish_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2008-Dec-13 18:16:01 INFO2 finish_task: DONE finished configuration: rotating ALFA to -39.7 degrees 2008-Dec-13 18:16:01 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-13 18:16:01 STOP end_task: Finishing task 'rotate ALFA to -39.7 degrees' with status 'OK' 2008-Dec-13 18:16:01 LOG5 end_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2008-Dec-13 18:16:01 START begin_task: Starting task 'waiting on telescope' 2008-Dec-13 18:16:01 LOG5 begin_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2008-Dec-13 18:16:01 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Dec-13 18:16:01 LOG3 waittrk: Start waittrk 5 2008-Dec-13 18:16:01 START begin_task: Starting task 'waiting on telescope movement' 2008-Dec-13 18:16:01 LOG5 begin_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2008-Dec-13 18:16:06 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Dec-13 18:16:06 LOG5 end_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2008-Dec-13 18:16:06 START begin_task: Starting task 'waiting on telescope on source' 2008-Dec-13 18:16:06 LOG5 begin_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2008-Dec-13 18:17:36 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Dec-13 18:17:36 LOG5 end_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2008-Dec-13 18:17:36 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Dec-13 18:17:36 INFO2 waittrk: Now tracking AGES7448_p2_145 2008-Dec-13 18:17:36 LOG4 waittrk: Current telescope position: Az = 424.74 ZA = 8.81 2008-Dec-13 18:17:36 STOP finish_task: Finishing task 'waiting on telescope' 2008-Dec-13 18:17:36 LOG5 finish_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2008-Dec-13 18:17:36 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Dec-13 18:17:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-13 18:17:36 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Dec-13 18:17:36 LOG5 end_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2008-Dec-13 18:17:36 START begin_task: Starting task 'selecting calibration type' 2008-Dec-13 18:17:36 LOG5 begin_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2008-Dec-13 18:17:36 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Dec-13 18:17:36 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Dec-13 18:17:36 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Dec-13 18:17:36 START begin_task: Starting task 'waiting on setcal' 2008-Dec-13 18:17:36 LOG5 begin_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2008-Dec-13 18:17:37 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Dec-13 18:17:37 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Dec-13 18:17:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 18:17:37 LOG4 got_cormsg: From DATATAKING: DONE 2008-Dec-13 18:17:37 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Dec-13 18:17:37 LOG5 end_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2008-Dec-13 18:17:37 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Dec-13 18:17:37 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Dec-13 18:17:37 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Dec-13 18:17:37 START begin_task: Starting task 'waiting on command to ALFA' 2008-Dec-13 18:17:37 LOG5 begin_task: Level: (4) ID = <10058> Status = 0 0 0 0 ok 2008-Dec-13 18:17:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 18:17:38 LOG4 got_alfamon: From ALFAMON: ACK 2008-Dec-13 18:17:38 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Dec-13 18:17:38 LOG5 end_task: Level: (4) ID = <10058> Status = 0 0 0 0 ok 2008-Dec-13 18:17:38 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Dec-13 18:17:38 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Dec-13 18:17:38 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Dec-13 18:17:38 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Dec-13 18:17:38 START begin_task: Starting task 'waiting on command to ALFA' 2008-Dec-13 18:17:38 LOG5 begin_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2008-Dec-13 18:17:38 LOG4 got_alfamon: From ALFAMON: ACK 2008-Dec-13 18:17:38 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Dec-13 18:17:38 LOG5 end_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2008-Dec-13 18:17:38 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Dec-13 18:17:38 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Dec-13 18:17:38 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Dec-13 18:17:38 LOG5 end_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2008-Dec-13 18:17:38 LOG5 dopset_later: Calling 'dopset_later 58.585139901082663' 2008-Dec-13 18:17:38 INFO3 dopset_later: Setting Doppler correction for 18:18:37 (58.6 seconds from now) 2008-Dec-13 18:17:38 LOG5 antvel: Calling 'antvel 64.860000 8.830222 F 58.585139901082663' 2008-Dec-13 18:17:38 LOG2 antvel: Transforming current Az = 64.86 ZA = 8.83 to apparent RA = 22:50:26.8 Dec = +14:26:00.3 2008-Dec-13 18:17:38 LOG2 antvel: Parameters to Doppler: Heliocentric 80317 2008 348 0.0 2008-Dec-13 18:17:38 INFO5 antvel: Computed antenna velocity: +28.42611 km/s 2008-Dec-13 18:17:38 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=28.426114239299999 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Dec-13 18:17:38 INFO4 dopset_gen: New sky frequencies: 1381.112472 1381.112472 1381.112472 1381.112472 1381.112472 1381.112472 1381.112472 1381.112472 1381.112472 2008-Dec-13 18:17:38 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.112472 sky0=1381.112472 sky1=1381.112472 sky2=1381.112472 sky3=1381.112472 sky4=1381.112472 sky5=1381.112472 sky6=1381.112472 sky7=1381.112472 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Dec-13 18:17:38 LOG2 dopset_gen: Result from 'sky2syn': 1631.112472 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Dec-13 18:17:38 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631112472.0} 2008-Dec-13 18:17:38 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-13 18:17:38 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Dec-13 18:17:38 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Dec-13 18:17:38 INFO5 fixed_driftmap: Tracking J2000 position: RA = 22:49:04.6 Dec = +14:23:09.3 2008-Dec-13 18:17:38 LOG3 track_source: Calling 'track_source AGES7448_p2_145 224904.6 142309.3 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Dec-13 18:17:38 START begin_task: Starting task 'sending tracking commands' 2008-Dec-13 18:17:38 LOG5 begin_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2008-Dec-13 18:17:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7448_p2_145} INFO {Slewing to source 'AGES7448_p2_145' ...} 2008-Dec-13 18:17:39 INFO1 track_source: Starting to track AGES7448_p2_145 2008-Dec-13 18:17:39 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7448_p2_145" 2008-Dec-13 18:17:39 LOG3 vw_send: To DATATAKING: set ra 224904.6 2008-Dec-13 18:17:39 LOG3 vw_send: To DATATAKING: set dec 142309.3 2008-Dec-13 18:17:39 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Dec-13 18:17:39 LOG3 vw_send: To DATATAKING: pnt tr 224904.6 142309.3 -CJ 2008-Dec-13 18:17:39 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Dec-13 18:17:39 STOP finish_task: Finishing task 'sending tracking commands' 2008-Dec-13 18:17:39 LOG5 finish_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2008-Dec-13 18:17:39 INFO2 finish_task: DONE finished sending: tracking commands 2008-Dec-13 18:17:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-13 18:17:39 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Dec-13 18:17:39 LOG5 end_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2008-Dec-13 18:17:39 START begin_task: Starting task 'waiting on telescope' 2008-Dec-13 18:17:39 LOG5 begin_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2008-Dec-13 18:17:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Dec-13 18:17:39 LOG3 waittrk: Start waittrk 5 2008-Dec-13 18:17:39 START begin_task: Starting task 'waiting on telescope movement' 2008-Dec-13 18:17:39 LOG5 begin_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2008-Dec-13 18:17:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631112472.0} 2008-Dec-13 18:17:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-13 18:17:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 18:17:39 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7448_p2_145" 2008-Dec-13 18:17:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 18:17:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 18:17:39 LOG4 got_cormsg: From DATATAKING: set ra 224904.6 2008-Dec-13 18:17:39 LOG4 got_cormsg: From DATATAKING: set dec 142309.3 2008-Dec-13 18:17:39 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Dec-13 18:17:39 LOG4 got_cormsg: From DATATAKING: pnt tr 224904.6 142309.3 -CJ 2008-Dec-13 18:17:39 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Dec-13 18:17:39 LOG4 got_cormsg: From DATATAKING: 224904.6 2008-Dec-13 18:17:39 LOG4 got_cormsg: From DATATAKING: vw% 142309.3 2008-Dec-13 18:17:39 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2008-Dec-13 18:17:44 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Dec-13 18:17:44 LOG5 end_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2008-Dec-13 18:17:44 START begin_task: Starting task 'waiting on telescope on source' 2008-Dec-13 18:17:44 LOG5 begin_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2008-Dec-13 18:17:46 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Dec-13 18:17:46 LOG5 end_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2008-Dec-13 18:17:46 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Dec-13 18:17:46 INFO2 waittrk: Now tracking AGES7448_p2_145 2008-Dec-13 18:17:46 LOG4 waittrk: Current telescope position: Az = 424.82 ZA = 8.83 2008-Dec-13 18:17:46 STOP finish_task: Finishing task 'waiting on telescope' 2008-Dec-13 18:17:46 LOG5 finish_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2008-Dec-13 18:17:46 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Dec-13 18:17:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-13 18:17:46 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Dec-13 18:17:46 LOG5 end_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2008-Dec-13 18:17:46 START begin_task: Starting task 'adjusting WAPP power' 2008-Dec-13 18:17:46 LOG5 begin_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2008-Dec-13 18:17:46 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Dec-13 18:17:46 INFO2 adjust_power: Starting to adjust WAPP power 2008-Dec-13 18:17:46 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Dec-13 18:17:46 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Dec-13 18:17:46 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Dec-13 18:17:46 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Dec-13 18:17:46 LOG5 begin_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2008-Dec-13 18:17:46 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Dec-13 18:17:46 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Dec-13 18:17:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 18:17:50 LOG4 got_cormsg: From DATATAKING: DONE 2008-Dec-13 18:17:50 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Dec-13 18:17:50 LOG5 end_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2008-Dec-13 18:17:50 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Dec-13 18:17:50 START begin_task: Starting task 'adjusting WAPP power' 2008-Dec-13 18:17:50 LOG5 begin_task: Level: (4) ID = <10066> Status = 0 0 0 0 ok 2008-Dec-13 18:17:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Dec-13 18:17:50 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Dec-13 18:17:50 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Dec-13 18:17:50 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Dec-13 18:17:50 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Dec-13 18:17:50 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Dec-13 18:17:50 LOG5 begin_task: Level: (5) ID = <10067> Status = 0 0 0 0 ok 2008-Dec-13 18:17:50 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Dec-13 18:17:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 18:17:50 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 7 6 dB 2008-Dec-13 18:17:50 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 0 dB --- beam 5: 5 5 dB 2008-Dec-13 18:17:50 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2008-Dec-13 18:17:50 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 2 0 dB 2008-Dec-13 18:17:50 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Dec-13 18:17:50 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Dec-13 18:17:50 LOG5 end_task: Level: (5) ID = <10067> Status = 0 0 0 0 ok 2008-Dec-13 18:17:50 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.988 0.917 ALFA beam 1: 0.904 0.993 2008-Dec-13 18:17:51 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.017 0.939 ALFA beam 3: 1.096 1.111 2008-Dec-13 18:17:51 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.086 1.117 ALFA beam 5: 1.105 0.983 2008-Dec-13 18:17:51 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.959 0.102 ALFA beam 7: 1.056 0.112 2008-Dec-13 18:17:51 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Dec-13 18:17:51 LOG5 finish_task: Level: (4) ID = <10066> Status = 0 0 0 0 ok 2008-Dec-13 18:17:51 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Dec-13 18:17:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-13 18:17:51 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Dec-13 18:17:51 LOG5 end_task: Level: (4) ID = <10066> Status = 0 0 0 0 ok 2008-Dec-13 18:17:51 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Dec-13 18:17:51 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Dec-13 18:17:51 LOG5 finish_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2008-Dec-13 18:17:51 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Dec-13 18:17:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-13 18:17:51 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Dec-13 18:17:51 LOG5 end_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2008-Dec-13 18:17:51 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Matthew Smith 2008-Dec-13 18:17:51 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Matthew Smith 2008-Dec-13 18:17:51 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Matthew Smith 2008-Dec-13 18:17:51 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Matthew Smith 2008-Dec-13 18:17:51 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Dec-13 18:17:51 START begin_task: Starting task 'WAPP calibration' 2008-Dec-13 18:17:51 LOG5 begin_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2008-Dec-13 18:17:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Dec-13 18:17:51 START begin_task: Starting task 'selecting calibration type' 2008-Dec-13 18:17:51 LOG5 begin_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2008-Dec-13 18:17:51 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Dec-13 18:17:51 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Dec-13 18:17:51 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Dec-13 18:17:51 START begin_task: Starting task 'waiting on setcal' 2008-Dec-13 18:17:51 LOG5 begin_task: Level: (5) ID = <10070> Status = 0 0 0 0 ok 2008-Dec-13 18:17:51 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Matthew Smith' 2008-Dec-13 18:17:51 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Dec-13 18:17:51 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Dec-13 18:17:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 18:17:51 LOG4 got_cormsg: From DATATAKING: DONE 2008-Dec-13 18:17:51 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Dec-13 18:17:51 LOG5 end_task: Level: (5) ID = <10070> Status = 0 0 0 0 ok 2008-Dec-13 18:17:51 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Dec-13 18:17:51 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Dec-13 18:17:51 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Dec-13 18:17:51 START begin_task: Starting task 'waiting on command to ALFA' 2008-Dec-13 18:17:51 LOG5 begin_task: Level: (5) ID = <10071> Status = 0 0 0 0 ok 2008-Dec-13 18:17:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 18:17:51 LOG4 got_alfamon: From ALFAMON: ACK 2008-Dec-13 18:17:51 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Dec-13 18:17:51 LOG5 end_task: Level: (5) ID = <10071> Status = 0 0 0 0 ok 2008-Dec-13 18:17:51 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Dec-13 18:17:51 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Dec-13 18:17:51 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Dec-13 18:17:51 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Dec-13 18:17:51 START begin_task: Starting task 'waiting on command to ALFA' 2008-Dec-13 18:17:51 LOG5 begin_task: Level: (5) ID = <10072> Status = 0 0 0 0 ok 2008-Dec-13 18:17:51 LOG4 got_alfamon: From ALFAMON: ACK 2008-Dec-13 18:17:51 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Dec-13 18:17:51 LOG5 end_task: Level: (5) ID = <10072> Status = 0 0 0 0 ok 2008-Dec-13 18:17:51 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Dec-13 18:17:51 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Dec-13 18:17:51 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Dec-13 18:17:51 LOG5 end_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2008-Dec-13 18:17:51 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Dec-13 18:17:51 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Dec-13 18:17:51 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Dec-13 18:17:51 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Dec-13 18:17:51 LOG5 begin_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2008-Dec-13 18:17:51 NOTE WAPPDATA-new_file: New FITS file: wapp.20081213.a2048.0001.fits 2008-Dec-13 18:17:51 LOG3 CALCONTROL-caltrig: Software trigger 2008-Dec-13 18:17:51 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081213.a2048.0001.fits} 2008-Dec-13 18:17:52 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Dec-13 18:17:52 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Dec-13 18:17:52 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Dec-13 18:17:52 LOG5 end_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2008-Dec-13 18:17:52 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Dec-13 18:17:52 LOG4 take_data: Calling 'take_data 5 5 CAL ON -' 2008-Dec-13 18:17:52 START begin_task: Starting task 'WAPP spectral observation' 2008-Dec-13 18:17:52 LOG5 begin_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2008-Dec-13 18:17:52 LOG5 log_alfabeam: Parameters: 22.817944444444446 14.385916666666663 23.378137 2008.9548593999543 -39.700069 2008-Dec-13 18:17:52 LOG4 log_alfabeam: ALFABEAM 0 22.817944444444436 14.385916666666660 2008-Dec-13 18:17:52 LOG4 log_alfabeam: ALFABEAM 1 22.817532333299290 14.478935589359955 2008-Dec-13 18:17:52 LOG4 log_alfabeam: ALFABEAM 2 22.811554730168762 14.417666312395225 2008-Dec-13 18:17:52 LOG4 log_alfabeam: ALFABEAM 3 22.812011955234201 14.323763298529789 2008-Dec-13 18:17:52 LOG4 log_alfabeam: ALFABEAM 4 22.818428895327934 14.292644740738226 2008-Dec-13 18:17:52 LOG4 log_alfabeam: ALFABEAM 5 22.824332302328379 14.355335082226857 2008-Dec-13 18:17:52 LOG4 log_alfabeam: ALFABEAM 6 22.823893309544129 14.447727019466035 2008-Dec-13 18:17:52 INFO2 take_data: Starting WAPP scan: 834800034 2008-Dec-13 18:17:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Dec-13 18:17:52 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Dec-13 18:17:52 LOG5 begin_task: Level: (5) ID = <10075> Status = 0 0 0 0 ok 2008-Dec-13 18:17:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Dec-13 18:17:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2008-Dec-13 18:17:52 LOG4 check_wapp_levels: WAPP-1 power levels: 0.988 0.917 0.904 0.993 2008-Dec-13 18:17:52 LOG4 check_wapp_levels: WAPP-2 power levels: 1.017 0.939 1.096 1.111 2008-Dec-13 18:17:52 LOG4 check_wapp_levels: WAPP-3 power levels: 1.086 1.117 1.105 0.983 2008-Dec-13 18:17:52 LOG4 check_wapp_levels: WAPP-4 power levels: 0.959 0.102 1.056 0.112 2008-Dec-13 18:17:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80273.00 2008-Dec-13 18:17:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.112472 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Dec-13 18:17:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.112472 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 18:17:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.112472 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 18:17:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.112472 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Dec-13 18:17:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.112472 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 18:17:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.112472 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Dec-13 18:17:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.112472 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Dec-13 18:17:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.112472 MHz Flip = 1 Band = 0 Mixer = 1990.000000 MHz 2008-Dec-13 18:17:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.112472 MHz Flip = 1 Band = 0 Mixer = 2000.000000 MHz 2008-Dec-13 18:17:58 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.551 (still bad) 2008-Dec-13 18:17:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Dec-13 18:17:58 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Dec-13 18:17:58 LOG5 end_task: Level: (5) ID = <10075> Status = 0 0 0 0 ok 2008-Dec-13 18:17:58 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Dec-13 18:17:58 LOG5 end_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2008-Dec-13 18:17:58 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Dec-13 18:17:58 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Dec-13 18:17:58 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Dec-13 18:17:58 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Dec-13 18:17:58 LOG5 begin_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2008-Dec-13 18:17:59 LOG3 CALCONTROL-caltrig: Software trigger 2008-Dec-13 18:17:59 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Dec-13 18:17:59 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Dec-13 18:17:59 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Dec-13 18:17:59 LOG5 end_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2008-Dec-13 18:17:59 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Dec-13 18:17:59 LOG4 take_data: Calling 'take_data 5 5 CAL OFF -' 2008-Dec-13 18:17:59 START begin_task: Starting task 'WAPP spectral observation' 2008-Dec-13 18:17:59 LOG5 begin_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2008-Dec-13 18:17:59 LOG5 log_alfabeam: Parameters: 22.817944444444446 14.385916666666663 23.380087 2008.954859621771 -39.700069 2008-Dec-13 18:17:59 LOG4 log_alfabeam: ALFABEAM 0 22.817944444444450 14.385916666666672 2008-Dec-13 18:17:59 LOG4 log_alfabeam: ALFABEAM 1 22.817540719178126 14.478943821506601 2008-Dec-13 18:17:59 LOG4 log_alfabeam: ALFABEAM 2 22.811557630104083 14.417787612361437 2008-Dec-13 18:17:59 LOG4 log_alfabeam: ALFABEAM 3 22.812006271373615 14.323878057052060 2008-Dec-13 18:17:59 LOG4 log_alfabeam: ALFABEAM 4 22.818420284312960 14.292635846604274 2008-Dec-13 18:17:59 LOG4 log_alfabeam: ALFABEAM 5 22.824329506131146 14.355210346650265 2008-Dec-13 18:17:59 LOG4 log_alfabeam: ALFABEAM 6 22.823898924647580 14.447612837191784 2008-Dec-13 18:17:59 INFO2 take_data: Starting WAPP scan: 834800035 2008-Dec-13 18:17:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Dec-13 18:17:59 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Dec-13 18:17:59 LOG5 begin_task: Level: (5) ID = <10078> Status = 0 0 0 0 ok 2008-Dec-13 18:17:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Dec-13 18:17:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80280.00 2008-Dec-13 18:18:04 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.551 (still bad) 2008-Dec-13 18:18:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.112472 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Dec-13 18:18:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.112472 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 18:18:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.112472 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 18:18:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.112472 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Dec-13 18:18:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.112472 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 18:18:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.112472 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Dec-13 18:18:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.112472 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Dec-13 18:18:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.112472 MHz Flip = 1 Band = 0 Mixer = 1990.000000 MHz 2008-Dec-13 18:18:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.112472 MHz Flip = 1 Band = 0 Mixer = 2000.000000 MHz 2008-Dec-13 18:18:05 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Dec-13 18:18:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Dec-13 18:18:05 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Dec-13 18:18:05 LOG5 end_task: Level: (5) ID = <10078> Status = 0 0 0 0 ok 2008-Dec-13 18:18:05 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Dec-13 18:18:05 LOG5 end_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2008-Dec-13 18:18:05 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Dec-13 18:18:05 STOP finish_task: Finishing task 'WAPP calibration' 2008-Dec-13 18:18:05 LOG5 finish_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2008-Dec-13 18:18:05 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Dec-13 18:18:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-13 18:18:05 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Dec-13 18:18:05 LOG5 end_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2008-Dec-13 18:18:06 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Dec-13 18:18:06 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 64.86 and ZA = 8.83 2008-Dec-13 18:18:06 LOG3 track_source: Calling 'track_source AGES7448_p2_145 64.86 8.8302215151 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Dec-13 18:18:06 START begin_task: Starting task 'sending tracking commands' 2008-Dec-13 18:18:06 LOG5 begin_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2008-Dec-13 18:18:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7448_p2_145} INFO {Slewing to source 'AGES7448_p2_145' ...} 2008-Dec-13 18:18:06 INFO1 track_source: Starting to track AGES7448_p2_145 2008-Dec-13 18:18:06 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7448_p2_145" 2008-Dec-13 18:18:06 LOG3 vw_send: To DATATAKING: set ra 64.86 2008-Dec-13 18:18:06 LOG3 vw_send: To DATATAKING: set dec 8.8302215151 2008-Dec-13 18:18:06 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Dec-13 18:18:06 LOG3 vw_send: To DATATAKING: pnt tr 64.86 8.8302215151 -CF 2008-Dec-13 18:18:06 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Dec-13 18:18:06 STOP finish_task: Finishing task 'sending tracking commands' 2008-Dec-13 18:18:06 LOG5 finish_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2008-Dec-13 18:18:06 INFO2 finish_task: DONE finished sending: tracking commands 2008-Dec-13 18:18:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-13 18:18:06 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Dec-13 18:18:06 LOG5 end_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2008-Dec-13 18:18:06 LOG1 fixed_driftmap: Parameters: HA = +00:33:00.0 Start = 23:23:27.0 LST = 23:22:55.3 diff = 31.7 secs 2008-Dec-13 18:18:06 INFO2 fixed_driftmap: Waiting 29.7 seconds for RA 22:50:27 2008-Dec-13 18:18:06 INFO2 lstwait: Waiting for 29.6 secs from LST 23:22:55 to LST 23:23:25 ... 2008-Dec-13 18:18:06 LOG4 send_obs_status: To obs_status: <1> TASKTIME 29.592518089890429 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Dec-13 18:18:06 START begin_task: Starting task 'waiting on wait on LST' 2008-Dec-13 18:18:06 LOG5 begin_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2008-Dec-13 18:18:06 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7448_p2_145" 2008-Dec-13 18:18:06 LOG4 got_cormsg: From DATATAKING: set ra 64.86 2008-Dec-13 18:18:06 LOG4 got_cormsg: From DATATAKING: set dec 8.8302215151 2008-Dec-13 18:18:06 LOG4 got_cormsg: From DATATAKING: vw% 64.86 2008-Dec-13 18:18:06 LOG4 got_cormsg: From DATATAKING: vw% 8.8302215151 2008-Dec-13 18:18:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 18:18:06 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Dec-13 18:18:06 LOG4 got_cormsg: From DATATAKING: pnt tr 64.86 8.8302215151 -CF 2008-Dec-13 18:18:06 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Dec-13 18:18:06 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Dec-13 18:18:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 18:18:10 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2008-Dec-13 18:18:35 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Dec-13 18:18:35 LOG5 end_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2008-Dec-13 18:18:35 LOG4 lstwait: Finished waiting 0.41 seconds late 2008-Dec-13 18:18:35 INFO3 lstwait: Finished waiting 2008-Dec-13 18:18:36 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Dec-13 18:18:36 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Dec-13 18:18:36 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Dec-13 18:18:36 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Dec-13 18:18:36 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Dec-13 18:18:36 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ -' 2008-Dec-13 18:18:36 START begin_task: Starting task 'WAPP spectral observation' 2008-Dec-13 18:18:36 LOG5 begin_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2008-Dec-13 18:18:36 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Dec-13 18:18:36 INFO2 take_data: Starting WAPP scan: 834800036 2008-Dec-13 18:18:36 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Dec-13 18:18:36 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Dec-13 18:18:36 LOG5 begin_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2008-Dec-13 18:18:36 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Dec-13 18:18:36 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80317.00 2008-Dec-13 18:18:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.112472 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Dec-13 18:18:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.112472 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 18:18:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.112472 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 18:18:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.112472 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Dec-13 18:18:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.112472 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 18:18:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.112472 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Dec-13 18:18:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.112472 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Dec-13 18:18:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.112472 MHz Flip = 1 Band = 0 Mixer = 1990.000000 MHz 2008-Dec-13 18:18:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.112472 MHz Flip = 1 Band = 0 Mixer = 2000.000000 MHz 2008-Dec-13 18:18:38 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2008-Dec-13 18:18:40 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.524 (still bad) 2008-Dec-13 18:18:42 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.514 (still bad) 2008-Dec-13 18:18:44 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.459 (still bad) 2008-Dec-13 18:18:46 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.376 (still bad) 2008-Dec-13 18:18:48 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.298 (still bad) 2008-Dec-13 18:18:50 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.211 (still bad) 2008-Dec-13 18:18:52 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.180 (still bad) 2008-Dec-13 18:18:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2008-Dec-13 18:18:54 LOG4 check_wapp_levels: WAPP-1 power levels: 0.989 0.920 0.901 0.993 2008-Dec-13 18:18:54 LOG4 check_wapp_levels: WAPP-2 power levels: 1.034 0.957 1.095 1.109 2008-Dec-13 18:18:54 LOG4 check_wapp_levels: WAPP-3 power levels: 1.184 1.219 1.113 0.998 2008-Dec-13 18:18:54 LOG4 check_wapp_levels: WAPP-4 power levels: 0.962 0.102 1.058 0.112 2008-Dec-13 18:18:56 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.257 (still bad) 2008-Dec-13 18:18:58 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.278 (still bad) 2008-Dec-13 18:19:00 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.281 (still bad) 2008-Dec-13 18:19:02 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.258 (still bad) 2008-Dec-13 18:19:04 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.226 (still bad) 2008-Dec-13 18:19:06 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.190 (still bad) 2008-Dec-13 18:19:08 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.154 (still bad) 2008-Dec-13 18:19:10 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.257 (still bad) 2008-Dec-13 18:19:12 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.284 (still bad) 2008-Dec-13 18:19:14 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.379 (still bad) 2008-Dec-13 18:19:16 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.485 (still bad) 2008-Dec-13 18:19:18 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.580 (still bad) 2008-Dec-13 18:19:20 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.639 (still bad) 2008-Dec-13 18:19:22 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.661 (still bad) 2008-Dec-13 18:19:24 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.631 (still bad) 2008-Dec-13 18:19:26 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.552 (still bad) 2008-Dec-13 18:19:28 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.442 (still bad) 2008-Dec-13 18:19:30 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.324 (still bad) 2008-Dec-13 18:19:32 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.221 (still bad) 2008-Dec-13 18:19:34 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.157 (still bad) 2008-Dec-13 18:19:36 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.130 (still bad) 2008-Dec-13 18:19:38 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.133 (still bad) 2008-Dec-13 18:19:40 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.156 (still bad) 2008-Dec-13 18:19:42 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.184 (still bad) 2008-Dec-13 18:19:45 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.199 (still bad) 2008-Dec-13 18:19:47 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.200 (still bad) 2008-Dec-13 18:19:49 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.186 (still bad) 2008-Dec-13 18:19:51 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.163 (still bad) 2008-Dec-13 18:19:53 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.143 (still bad) 2008-Dec-13 18:19:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2008-Dec-13 18:19:55 LOG4 check_wapp_levels: WAPP-1 power levels: 0.983 0.918 0.903 0.992 2008-Dec-13 18:19:55 LOG4 check_wapp_levels: WAPP-2 power levels: 1.018 0.948 1.113 1.129 2008-Dec-13 18:19:55 LOG4 check_wapp_levels: WAPP-3 power levels: 1.081 1.115 1.101 0.985 2008-Dec-13 18:19:55 LOG4 check_wapp_levels: WAPP-4 power levels: 0.955 0.102 1.051 0.112 2008-Dec-13 18:19:57 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.120 (still bad) 2008-Dec-13 18:19:59 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2008-Dec-13 18:20:01 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2008-Dec-13 18:20:03 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2008-Dec-13 18:20:05 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.120 (still bad) 2008-Dec-13 18:20:07 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2008-Dec-13 18:20:09 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2008-Dec-13 18:20:11 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2008-Dec-13 18:20:13 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2008-Dec-13 18:20:15 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2008-Dec-13 18:20:17 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2008-Dec-13 18:20:19 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2008-Dec-13 18:20:21 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2008-Dec-13 18:20:23 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2008-Dec-13 18:20:25 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.130 (still bad) 2008-Dec-13 18:20:27 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2008-Dec-13 18:20:29 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2008-Dec-13 18:20:31 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2008-Dec-13 18:20:33 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2008-Dec-13 18:20:35 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.127 (still bad) 2008-Dec-13 18:20:37 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2008-Dec-13 18:20:39 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2008-Dec-13 18:20:41 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.120 (still bad) 2008-Dec-13 18:20:43 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2008-Dec-13 18:20:45 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2008-Dec-13 18:20:47 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.128 (still bad) 2008-Dec-13 18:20:49 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2008-Dec-13 18:20:51 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2008-Dec-13 18:20:53 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.120 (still bad) 2008-Dec-13 18:20:55 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2008-Dec-13 18:20:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2008-Dec-13 18:20:57 LOG4 check_wapp_levels: WAPP-1 power levels: 0.982 0.919 0.904 0.997 2008-Dec-13 18:20:57 LOG4 check_wapp_levels: WAPP-2 power levels: 1.015 0.943 1.099 1.115 2008-Dec-13 18:20:57 LOG4 check_wapp_levels: WAPP-3 power levels: 1.080 1.119 1.101 0.986 2008-Dec-13 18:20:57 LOG4 check_wapp_levels: WAPP-4 power levels: 0.957 0.102 1.053 0.112 2008-Dec-13 18:20:59 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.126 (still bad) 2008-Dec-13 18:21:01 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2008-Dec-13 18:21:03 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2008-Dec-13 18:21:05 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2008-Dec-13 18:21:07 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2008-Dec-13 18:21:09 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2008-Dec-13 18:21:12 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.126 (still bad) 2008-Dec-13 18:21:14 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2008-Dec-13 18:21:16 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2008-Dec-13 18:21:18 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2008-Dec-13 18:21:20 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2008-Dec-13 18:21:22 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2008-Dec-13 18:21:24 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.125 (still bad) 2008-Dec-13 18:21:26 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2008-Dec-13 18:21:28 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2008-Dec-13 18:21:30 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2008-Dec-13 18:21:32 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2008-Dec-13 18:21:34 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2008-Dec-13 18:21:36 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.129 (still bad) 2008-Dec-13 18:21:38 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.120 (still bad) 2008-Dec-13 18:21:40 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2008-Dec-13 18:21:42 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2008-Dec-13 18:21:44 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2008-Dec-13 18:21:46 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2008-Dec-13 18:21:48 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.127 (still bad) 2008-Dec-13 18:21:50 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2008-Dec-13 18:21:52 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2008-Dec-13 18:21:54 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2008-Dec-13 18:21:56 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2008-Dec-13 18:21:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2008-Dec-13 18:21:58 LOG4 check_wapp_levels: WAPP-1 power levels: 0.980 0.920 0.902 0.994 2008-Dec-13 18:21:58 LOG4 check_wapp_levels: WAPP-2 power levels: 1.018 0.946 1.104 1.118 2008-Dec-13 18:21:58 LOG4 check_wapp_levels: WAPP-3 power levels: 1.081 1.118 1.101 0.988 2008-Dec-13 18:21:58 LOG4 check_wapp_levels: WAPP-4 power levels: 0.958 0.102 1.054 0.112 2008-Dec-13 18:22:00 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.155 (still bad) 2008-Dec-13 18:22:02 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2008-Dec-13 18:22:04 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2008-Dec-13 18:22:06 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2008-Dec-13 18:22:08 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2008-Dec-13 18:22:10 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2008-Dec-13 18:22:12 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2008-Dec-13 18:22:14 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2008-Dec-13 18:22:16 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2008-Dec-13 18:22:18 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2008-Dec-13 18:22:20 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2008-Dec-13 18:22:22 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.120 (still bad) 2008-Dec-13 18:22:24 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2008-Dec-13 18:22:26 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2008-Dec-13 18:22:28 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2008-Dec-13 18:22:30 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2008-Dec-13 18:22:33 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2008-Dec-13 18:22:35 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.120 (still bad) 2008-Dec-13 18:22:37 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.126 (still bad) 2008-Dec-13 18:22:39 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2008-Dec-13 18:22:41 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.120 (still bad) 2008-Dec-13 18:22:43 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.123 (still bad) 2008-Dec-13 18:22:45 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2008-Dec-13 18:22:47 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2008-Dec-13 18:22:49 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.126 (still bad) 2008-Dec-13 18:22:51 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2008-Dec-13 18:22:53 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2008-Dec-13 18:22:55 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.124 (still bad) 2008-Dec-13 18:22:57 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2008-Dec-13 18:22:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2008-Dec-13 18:22:59 LOG4 check_wapp_levels: WAPP-1 power levels: 0.984 0.927 0.920 1.012 2008-Dec-13 18:22:59 LOG4 check_wapp_levels: WAPP-2 power levels: 1.021 0.951 1.102 1.124 2008-Dec-13 18:22:59 LOG4 check_wapp_levels: WAPP-3 power levels: 1.085 1.121 1.113 0.995 2008-Dec-13 18:22:59 LOG4 check_wapp_levels: WAPP-4 power levels: 0.970 0.102 1.068 0.113 2008-Dec-13 18:23:01 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.129 (still bad) 2008-Dec-13 18:23:03 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2008-Dec-13 18:23:05 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2008-Dec-13 18:23:07 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.124 (still bad) 2008-Dec-13 18:23:09 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.120 (still bad) 2008-Dec-13 18:23:11 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2008-Dec-13 18:23:13 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.127 (still bad) 2008-Dec-13 18:23:15 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.120 (still bad) 2008-Dec-13 18:23:17 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2008-Dec-13 18:23:19 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2008-Dec-13 18:23:21 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2008-Dec-13 18:23:23 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.120 (still bad) 2008-Dec-13 18:23:25 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.129 (still bad) 2008-Dec-13 18:23:27 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2008-Dec-13 18:23:29 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.165 (still bad) 2008-Dec-13 18:23:31 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2008-Dec-13 18:23:33 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2008-Dec-13 18:23:35 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.120 (still bad) 2008-Dec-13 18:23:37 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.127 (still bad) 2008-Dec-13 18:23:39 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2008-Dec-13 18:23:41 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2008-Dec-13 18:23:43 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2008-Dec-13 18:23:45 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2008-Dec-13 18:23:47 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2008-Dec-13 18:23:49 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2008-Dec-13 18:23:51 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2008-Dec-13 18:23:53 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2008-Dec-13 18:23:55 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2008-Dec-13 18:23:58 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2008-Dec-13 18:24:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2008-Dec-13 18:24:00 LOG4 check_wapp_levels: WAPP-1 power levels: 0.978 0.923 0.909 0.999 2008-Dec-13 18:24:00 LOG4 check_wapp_levels: WAPP-2 power levels: 1.021 0.949 1.098 1.117 2008-Dec-13 18:24:00 LOG4 check_wapp_levels: WAPP-3 power levels: 1.081 1.113 1.109 0.993 2008-Dec-13 18:24:00 LOG4 check_wapp_levels: WAPP-4 power levels: 0.965 0.102 1.060 0.112 2008-Dec-13 18:24:02 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2008-Dec-13 18:24:04 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2008-Dec-13 18:24:06 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2008-Dec-13 18:24:08 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2008-Dec-13 18:24:10 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2008-Dec-13 18:24:12 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2008-Dec-13 18:24:14 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2008-Dec-13 18:24:16 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2008-Dec-13 18:24:18 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2008-Dec-13 18:24:20 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2008-Dec-13 18:24:22 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2008-Dec-13 18:24:24 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.120 (still bad) 2008-Dec-13 18:24:26 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2008-Dec-13 18:24:28 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2008-Dec-13 18:24:30 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2008-Dec-13 18:24:32 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2008-Dec-13 18:24:34 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2008-Dec-13 18:24:36 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2008-Dec-13 18:24:38 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2008-Dec-13 18:24:40 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2008-Dec-13 18:24:42 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2008-Dec-13 18:24:44 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2008-Dec-13 18:24:46 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2008-Dec-13 18:24:48 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.120 (still bad) 2008-Dec-13 18:24:50 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2008-Dec-13 18:24:52 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2008-Dec-13 18:24:54 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2008-Dec-13 18:24:56 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2008-Dec-13 18:24:58 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2008-Dec-13 18:25:00 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.120 (still bad) 2008-Dec-13 18:25:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2008-Dec-13 18:25:02 LOG4 check_wapp_levels: WAPP-1 power levels: 0.978 0.922 0.929 1.017 2008-Dec-13 18:25:02 LOG4 check_wapp_levels: WAPP-2 power levels: 1.021 0.947 1.104 1.119 2008-Dec-13 18:25:02 LOG4 check_wapp_levels: WAPP-3 power levels: 1.079 1.108 1.104 0.986 2008-Dec-13 18:25:02 LOG4 check_wapp_levels: WAPP-4 power levels: 0.961 0.102 1.057 0.112 2008-Dec-13 18:25:04 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2008-Dec-13 18:25:06 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2008-Dec-13 18:25:08 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2008-Dec-13 18:25:10 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2008-Dec-13 18:25:12 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.123 (still bad) 2008-Dec-13 18:25:14 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2008-Dec-13 18:25:16 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2008-Dec-13 18:25:18 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2008-Dec-13 18:25:20 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.208 (still bad) 2008-Dec-13 18:25:22 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.131 (still bad) 2008-Dec-13 18:25:25 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.139 (still bad) 2008-Dec-13 18:25:27 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.130 (still bad) 2008-Dec-13 18:25:29 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.128 (still bad) 2008-Dec-13 18:25:31 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.128 (still bad) 2008-Dec-13 18:25:33 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.127 (still bad) 2008-Dec-13 18:25:35 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.125 (still bad) 2008-Dec-13 18:25:37 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.127 (still bad) 2008-Dec-13 18:25:39 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2008-Dec-13 18:25:41 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.123 (still bad) 2008-Dec-13 18:25:43 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2008-Dec-13 18:25:45 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.120 (still bad) 2008-Dec-13 18:25:47 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2008-Dec-13 18:25:49 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2008-Dec-13 18:25:51 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2008-Dec-13 18:25:53 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2008-Dec-13 18:25:55 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.120 (still bad) 2008-Dec-13 18:25:57 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2008-Dec-13 18:25:59 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2008-Dec-13 18:26:01 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.120 (still bad) 2008-Dec-13 18:26:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2008-Dec-13 18:26:03 LOG4 check_wapp_levels: WAPP-1 power levels: 0.972 0.918 0.901 0.988 2008-Dec-13 18:26:03 LOG4 check_wapp_levels: WAPP-2 power levels: 1.026 0.954 1.095 1.109 2008-Dec-13 18:26:03 LOG4 check_wapp_levels: WAPP-3 power levels: 1.077 1.118 1.099 0.981 2008-Dec-13 18:26:03 LOG4 check_wapp_levels: WAPP-4 power levels: 0.959 0.102 1.055 0.112 2008-Dec-13 18:26:05 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2008-Dec-13 18:26:07 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2008-Dec-13 18:26:09 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2008-Dec-13 18:26:11 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2008-Dec-13 18:26:13 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2008-Dec-13 18:26:15 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2008-Dec-13 18:26:17 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2008-Dec-13 18:26:19 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2008-Dec-13 18:26:21 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2008-Dec-13 18:26:23 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2008-Dec-13 18:26:25 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2008-Dec-13 18:26:27 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2008-Dec-13 18:26:29 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2008-Dec-13 18:26:31 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2008-Dec-13 18:26:33 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2008-Dec-13 18:26:35 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2008-Dec-13 18:26:37 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2008-Dec-13 18:26:39 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2008-Dec-13 18:26:41 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2008-Dec-13 18:26:43 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2008-Dec-13 18:26:45 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2008-Dec-13 18:26:47 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2008-Dec-13 18:26:49 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2008-Dec-13 18:26:52 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2008-Dec-13 18:26:54 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2008-Dec-13 18:26:56 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2008-Dec-13 18:26:58 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2008-Dec-13 18:27:00 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2008-Dec-13 18:27:02 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2008-Dec-13 18:27:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2008-Dec-13 18:27:04 LOG4 check_wapp_levels: WAPP-1 power levels: 0.965 0.913 0.900 0.985 2008-Dec-13 18:27:04 LOG4 check_wapp_levels: WAPP-2 power levels: 1.005 0.931 1.092 1.105 2008-Dec-13 18:27:04 LOG4 check_wapp_levels: WAPP-3 power levels: 1.073 1.107 1.099 0.981 2008-Dec-13 18:27:04 LOG4 check_wapp_levels: WAPP-4 power levels: 0.953 0.102 1.048 0.112 2008-Dec-13 18:27:06 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2008-Dec-13 18:27:08 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2008-Dec-13 18:27:10 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2008-Dec-13 18:27:12 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2008-Dec-13 18:27:14 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2008-Dec-13 18:27:16 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2008-Dec-13 18:27:18 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2008-Dec-13 18:27:20 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2008-Dec-13 18:27:22 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2008-Dec-13 18:27:24 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2008-Dec-13 18:27:26 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2008-Dec-13 18:27:28 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2008-Dec-13 18:27:30 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2008-Dec-13 18:27:32 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2008-Dec-13 18:27:34 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2008-Dec-13 18:27:36 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2008-Dec-13 18:27:38 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2008-Dec-13 18:27:40 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2008-Dec-13 18:27:42 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2008-Dec-13 18:27:44 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2008-Dec-13 18:27:46 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2008-Dec-13 18:27:48 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2008-Dec-13 18:27:50 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2008-Dec-13 18:27:52 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2008-Dec-13 18:27:54 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2008-Dec-13 18:27:56 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.103 (still bad) 2008-Dec-13 18:27:58 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.102 (still bad) 2008-Dec-13 18:28:00 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2008-Dec-13 18:28:02 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2008-Dec-13 18:28:04 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.103 (still bad) 2008-Dec-13 18:28:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2008-Dec-13 18:28:06 LOG4 check_wapp_levels: WAPP-1 power levels: 0.964 0.912 0.899 0.988 2008-Dec-13 18:28:06 LOG4 check_wapp_levels: WAPP-2 power levels: 1.005 0.932 1.092 1.103 2008-Dec-13 18:28:06 LOG4 check_wapp_levels: WAPP-3 power levels: 1.072 1.105 1.094 0.976 2008-Dec-13 18:28:06 LOG4 check_wapp_levels: WAPP-4 power levels: 0.954 0.102 1.049 0.112 2008-Dec-13 18:28:08 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2008-Dec-13 18:28:10 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2008-Dec-13 18:28:12 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2008-Dec-13 18:28:14 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2008-Dec-13 18:28:17 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2008-Dec-13 18:28:19 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2008-Dec-13 18:28:21 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2008-Dec-13 18:28:23 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2008-Dec-13 18:28:25 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2008-Dec-13 18:28:27 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2008-Dec-13 18:28:29 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2008-Dec-13 18:28:31 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2008-Dec-13 18:28:33 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2008-Dec-13 18:28:35 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2008-Dec-13 18:28:37 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2008-Dec-13 18:28:39 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2008-Dec-13 18:28:41 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2008-Dec-13 18:28:43 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2008-Dec-13 18:28:45 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2008-Dec-13 18:28:47 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2008-Dec-13 18:28:49 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2008-Dec-13 18:28:51 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2008-Dec-13 18:28:53 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2008-Dec-13 18:28:55 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2008-Dec-13 18:28:57 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2008-Dec-13 18:28:59 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2008-Dec-13 18:29:01 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2008-Dec-13 18:29:03 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2008-Dec-13 18:29:05 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2008-Dec-13 18:29:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2008-Dec-13 18:29:07 LOG4 check_wapp_levels: WAPP-1 power levels: 0.970 0.918 0.901 0.990 2008-Dec-13 18:29:07 LOG4 check_wapp_levels: WAPP-2 power levels: 1.011 0.933 1.096 1.108 2008-Dec-13 18:29:07 LOG4 check_wapp_levels: WAPP-3 power levels: 1.076 1.111 1.101 0.983 2008-Dec-13 18:29:07 LOG4 check_wapp_levels: WAPP-4 power levels: 0.997 0.102 1.097 0.112 2008-Dec-13 18:29:09 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2008-Dec-13 18:29:11 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2008-Dec-13 18:29:13 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2008-Dec-13 18:29:15 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2008-Dec-13 18:29:17 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2008-Dec-13 18:29:19 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2008-Dec-13 18:29:21 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2008-Dec-13 18:29:23 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2008-Dec-13 18:29:25 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2008-Dec-13 18:29:27 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2008-Dec-13 18:29:29 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2008-Dec-13 18:29:31 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2008-Dec-13 18:29:33 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2008-Dec-13 18:29:35 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2008-Dec-13 18:29:37 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.120 (still bad) 2008-Dec-13 18:29:39 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2008-Dec-13 18:29:41 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2008-Dec-13 18:29:43 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2008-Dec-13 18:29:46 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2008-Dec-13 18:29:48 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2008-Dec-13 18:29:50 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.120 (still bad) 2008-Dec-13 18:29:52 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2008-Dec-13 18:29:54 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2008-Dec-13 18:29:56 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2008-Dec-13 18:29:58 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2008-Dec-13 18:30:00 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2008-Dec-13 18:30:02 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2008-Dec-13 18:30:04 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2008-Dec-13 18:30:06 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2008-Dec-13 18:30:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2008-Dec-13 18:30:08 LOG4 check_wapp_levels: WAPP-1 power levels: 0.965 0.915 0.898 0.988 2008-Dec-13 18:30:08 LOG4 check_wapp_levels: WAPP-2 power levels: 1.018 0.942 1.095 1.108 2008-Dec-13 18:30:08 LOG4 check_wapp_levels: WAPP-3 power levels: 1.072 1.106 1.097 0.978 2008-Dec-13 18:30:08 LOG4 check_wapp_levels: WAPP-4 power levels: 0.956 0.102 1.051 0.112 2008-Dec-13 18:30:10 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2008-Dec-13 18:30:12 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2008-Dec-13 18:30:14 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2008-Dec-13 18:30:16 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2008-Dec-13 18:30:18 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2008-Dec-13 18:30:20 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2008-Dec-13 18:30:22 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2008-Dec-13 18:30:24 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2008-Dec-13 18:30:26 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2008-Dec-13 18:30:28 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2008-Dec-13 18:30:30 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2008-Dec-13 18:30:32 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2008-Dec-13 18:30:34 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2008-Dec-13 18:30:36 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2008-Dec-13 18:30:38 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2008-Dec-13 18:30:40 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2008-Dec-13 18:30:42 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2008-Dec-13 18:30:44 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2008-Dec-13 18:30:46 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2008-Dec-13 18:30:48 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2008-Dec-13 18:30:50 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2008-Dec-13 18:30:52 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2008-Dec-13 18:30:54 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2008-Dec-13 18:30:56 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2008-Dec-13 18:30:58 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2008-Dec-13 18:31:00 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2008-Dec-13 18:31:02 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.118 (still bad) 2008-Dec-13 18:31:04 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2008-Dec-13 18:31:06 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2008-Dec-13 18:31:08 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2008-Dec-13 18:31:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2008-Dec-13 18:31:10 LOG4 check_wapp_levels: WAPP-1 power levels: 0.965 0.916 0.897 0.988 2008-Dec-13 18:31:10 LOG4 check_wapp_levels: WAPP-2 power levels: 1.009 0.934 1.101 1.109 2008-Dec-13 18:31:10 LOG4 check_wapp_levels: WAPP-3 power levels: 1.072 1.107 1.097 0.979 2008-Dec-13 18:31:10 LOG4 check_wapp_levels: WAPP-4 power levels: 0.960 0.102 1.054 0.112 2008-Dec-13 18:31:12 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2008-Dec-13 18:31:15 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.119 (still bad) 2008-Dec-13 18:31:17 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2008-Dec-13 18:31:19 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2008-Dec-13 18:31:21 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2008-Dec-13 18:31:23 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2008-Dec-13 18:31:25 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2008-Dec-13 18:31:27 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.117 (still bad) 2008-Dec-13 18:31:29 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2008-Dec-13 18:31:31 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2008-Dec-13 18:31:33 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2008-Dec-13 18:31:35 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2008-Dec-13 18:31:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.209 (still bad) 2008-Dec-13 18:31:39 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2008-Dec-13 18:31:41 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2008-Dec-13 18:31:43 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2008-Dec-13 18:31:45 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2008-Dec-13 18:31:47 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2008-Dec-13 18:31:49 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2008-Dec-13 18:31:51 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.118 (still bad) 2008-Dec-13 18:31:53 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2008-Dec-13 18:31:55 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2008-Dec-13 18:31:57 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2008-Dec-13 18:31:59 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2008-Dec-13 18:32:01 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2008-Dec-13 18:32:03 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.126 (still bad) 2008-Dec-13 18:32:05 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2008-Dec-13 18:32:07 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2008-Dec-13 18:32:09 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2008-Dec-13 18:32:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2008-Dec-13 18:32:11 LOG4 check_wapp_levels: WAPP-1 power levels: 0.965 0.918 0.903 0.996 2008-Dec-13 18:32:11 LOG4 check_wapp_levels: WAPP-2 power levels: 1.012 0.936 1.107 1.115 2008-Dec-13 18:32:11 LOG4 check_wapp_levels: WAPP-3 power levels: 1.082 1.116 1.097 0.981 2008-Dec-13 18:32:11 LOG4 check_wapp_levels: WAPP-4 power levels: 0.957 0.102 1.051 0.112 2008-Dec-13 18:32:13 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.120 (still bad) 2008-Dec-13 18:32:15 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.124 (still bad) 2008-Dec-13 18:32:17 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.124 (still bad) 2008-Dec-13 18:32:19 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.129 (still bad) 2008-Dec-13 18:32:21 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.133 (still bad) 2008-Dec-13 18:32:23 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.133 (still bad) 2008-Dec-13 18:32:25 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.138 (still bad) 2008-Dec-13 18:32:27 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.136 (still bad) 2008-Dec-13 18:32:29 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.127 (still bad) 2008-Dec-13 18:32:31 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.126 (still bad) 2008-Dec-13 18:32:33 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2008-Dec-13 18:32:35 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2008-Dec-13 18:32:38 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2008-Dec-13 18:32:40 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2008-Dec-13 18:32:42 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2008-Dec-13 18:32:44 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2008-Dec-13 18:32:46 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2008-Dec-13 18:32:48 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2008-Dec-13 18:32:50 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2008-Dec-13 18:32:52 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2008-Dec-13 18:32:54 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2008-Dec-13 18:32:56 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2008-Dec-13 18:32:58 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2008-Dec-13 18:33:00 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2008-Dec-13 18:33:02 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2008-Dec-13 18:33:04 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2008-Dec-13 18:33:06 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2008-Dec-13 18:33:08 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2008-Dec-13 18:33:10 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2008-Dec-13 18:33:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2008-Dec-13 18:33:12 LOG4 check_wapp_levels: WAPP-1 power levels: 0.967 0.920 0.901 0.991 2008-Dec-13 18:33:12 LOG4 check_wapp_levels: WAPP-2 power levels: 1.015 0.938 1.104 1.115 2008-Dec-13 18:33:12 LOG4 check_wapp_levels: WAPP-3 power levels: 1.076 1.110 1.100 0.984 2008-Dec-13 18:33:12 LOG4 check_wapp_levels: WAPP-4 power levels: 0.961 0.102 1.057 0.112 2008-Dec-13 18:33:14 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2008-Dec-13 18:33:16 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2008-Dec-13 18:33:18 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2008-Dec-13 18:33:20 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2008-Dec-13 18:33:22 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2008-Dec-13 18:33:24 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2008-Dec-13 18:33:26 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.113 (still bad) 2008-Dec-13 18:33:28 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2008-Dec-13 18:33:30 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2008-Dec-13 18:33:32 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2008-Dec-13 18:33:34 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2008-Dec-13 18:33:36 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2008-Dec-13 18:33:38 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.118 (still bad) 2008-Dec-13 18:33:40 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.137 (still bad) 2008-Dec-13 18:33:42 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2008-Dec-13 18:33:44 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2008-Dec-13 18:33:46 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2008-Dec-13 18:33:48 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2008-Dec-13 18:33:50 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2008-Dec-13 18:33:52 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2008-Dec-13 18:33:54 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2008-Dec-13 18:33:56 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2008-Dec-13 18:33:58 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2008-Dec-13 18:34:01 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2008-Dec-13 18:34:03 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.124 (still bad) 2008-Dec-13 18:34:05 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2008-Dec-13 18:34:07 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2008-Dec-13 18:34:09 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2008-Dec-13 18:34:11 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2008-Dec-13 18:34:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2008-Dec-13 18:34:13 LOG4 check_wapp_levels: WAPP-1 power levels: 0.973 0.923 0.902 0.992 2008-Dec-13 18:34:13 LOG4 check_wapp_levels: WAPP-2 power levels: 1.013 0.936 1.106 1.115 2008-Dec-13 18:34:13 LOG4 check_wapp_levels: WAPP-3 power levels: 1.081 1.111 1.106 0.987 2008-Dec-13 18:34:13 LOG4 check_wapp_levels: WAPP-4 power levels: 0.963 0.102 1.058 0.112 2008-Dec-13 18:34:15 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.125 (still bad) 2008-Dec-13 18:34:17 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2008-Dec-13 18:34:19 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2008-Dec-13 18:34:21 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2008-Dec-13 18:34:23 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2008-Dec-13 18:34:25 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2008-Dec-13 18:34:27 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.123 (still bad) 2008-Dec-13 18:34:29 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2008-Dec-13 18:34:31 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2008-Dec-13 18:34:33 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2008-Dec-13 18:34:35 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2008-Dec-13 18:34:37 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2008-Dec-13 18:34:39 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.126 (still bad) 2008-Dec-13 18:34:41 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2008-Dec-13 18:34:43 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2008-Dec-13 18:34:45 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.120 (still bad) 2008-Dec-13 18:34:47 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2008-Dec-13 18:34:49 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2008-Dec-13 18:34:51 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.127 (still bad) 2008-Dec-13 18:34:53 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2008-Dec-13 18:34:55 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2008-Dec-13 18:34:57 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2008-Dec-13 18:34:59 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2008-Dec-13 18:35:01 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2008-Dec-13 18:35:03 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.127 (still bad) 2008-Dec-13 18:35:05 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2008-Dec-13 18:35:07 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2008-Dec-13 18:35:09 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2008-Dec-13 18:35:11 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2008-Dec-13 18:35:13 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2008-Dec-13 18:35:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2008-Dec-13 18:35:15 LOG4 check_wapp_levels: WAPP-1 power levels: 0.980 0.931 0.914 1.000 2008-Dec-13 18:35:15 LOG4 check_wapp_levels: WAPP-2 power levels: 1.020 0.940 1.107 1.119 2008-Dec-13 18:35:15 LOG4 check_wapp_levels: WAPP-3 power levels: 1.085 1.117 1.119 0.995 2008-Dec-13 18:35:15 LOG4 check_wapp_levels: WAPP-4 power levels: 0.967 0.102 1.064 0.112 2008-Dec-13 18:35:17 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2008-Dec-13 18:35:19 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2008-Dec-13 18:35:21 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2008-Dec-13 18:35:23 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2008-Dec-13 18:35:26 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2008-Dec-13 18:35:28 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2008-Dec-13 18:35:30 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2008-Dec-13 18:35:32 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2008-Dec-13 18:35:34 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2008-Dec-13 18:35:36 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2008-Dec-13 18:35:38 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.127 (still bad) 2008-Dec-13 18:35:40 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2008-Dec-13 18:35:42 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2008-Dec-13 18:35:44 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.120 (still bad) 2008-Dec-13 18:35:46 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2008-Dec-13 18:35:48 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2008-Dec-13 18:35:50 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.127 (still bad) 2008-Dec-13 18:35:52 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2008-Dec-13 18:35:54 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2008-Dec-13 18:35:56 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2008-Dec-13 18:35:58 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2008-Dec-13 18:36:00 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2008-Dec-13 18:36:02 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.131 (still bad) 2008-Dec-13 18:36:04 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2008-Dec-13 18:36:06 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2008-Dec-13 18:36:08 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.120 (still bad) 2008-Dec-13 18:36:10 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2008-Dec-13 18:36:12 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2008-Dec-13 18:36:14 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.128 (still bad) 2008-Dec-13 18:36:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2008-Dec-13 18:36:16 LOG4 check_wapp_levels: WAPP-1 power levels: 0.973 0.924 0.905 0.996 2008-Dec-13 18:36:16 LOG4 check_wapp_levels: WAPP-2 power levels: 1.018 0.941 1.108 1.118 2008-Dec-13 18:36:16 LOG4 check_wapp_levels: WAPP-3 power levels: 1.084 1.115 1.109 0.990 2008-Dec-13 18:36:16 LOG4 check_wapp_levels: WAPP-4 power levels: 0.963 0.102 1.060 0.112 2008-Dec-13 18:36:18 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2008-Dec-13 18:36:20 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2008-Dec-13 18:36:22 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2008-Dec-13 18:36:24 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2008-Dec-13 18:36:26 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.130 (still bad) 2008-Dec-13 18:36:28 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2008-Dec-13 18:36:30 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2008-Dec-13 18:36:32 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.123 (still bad) 2008-Dec-13 18:36:34 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.120 (still bad) 2008-Dec-13 18:36:36 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2008-Dec-13 18:36:38 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2008-Dec-13 18:36:40 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.127 (still bad) 2008-Dec-13 18:36:42 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.134 (still bad) 2008-Dec-13 18:36:44 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.151 (still bad) 2008-Dec-13 18:36:46 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.155 (still bad) 2008-Dec-13 18:36:48 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.167 (still bad) 2008-Dec-13 18:36:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.181 (still bad) 2008-Dec-13 18:36:53 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.168 (still bad) 2008-Dec-13 18:36:55 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.167 (still bad) 2008-Dec-13 18:36:57 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.160 (still bad) 2008-Dec-13 18:36:59 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.149 (still bad) 2008-Dec-13 18:37:01 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.139 (still bad) 2008-Dec-13 18:37:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2008-Dec-13 18:37:05 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.133 (still bad) 2008-Dec-13 18:37:07 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.137 (still bad) 2008-Dec-13 18:37:09 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.142 (still bad) 2008-Dec-13 18:37:11 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.144 (still bad) 2008-Dec-13 18:37:13 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.149 (still bad) 2008-Dec-13 18:37:15 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.151 (still bad) 2008-Dec-13 18:37:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2008-Dec-13 18:37:17 LOG4 check_wapp_levels: WAPP-1 power levels: 0.977 0.930 0.911 1.001 2008-Dec-13 18:37:17 LOG4 check_wapp_levels: WAPP-2 power levels: 1.023 0.945 1.131 1.146 2008-Dec-13 18:37:17 LOG4 check_wapp_levels: WAPP-3 power levels: 1.090 1.124 1.112 0.991 2008-Dec-13 18:37:17 LOG4 check_wapp_levels: WAPP-4 power levels: 0.972 0.102 1.070 0.112 2008-Dec-13 18:37:19 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.143 (still bad) 2008-Dec-13 18:37:21 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.140 (still bad) 2008-Dec-13 18:37:23 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.134 (still bad) 2008-Dec-13 18:37:25 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.132 (still bad) 2008-Dec-13 18:37:27 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.131 (still bad) 2008-Dec-13 18:37:29 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.129 (still bad) 2008-Dec-13 18:37:31 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.130 (still bad) 2008-Dec-13 18:37:33 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.131 (still bad) 2008-Dec-13 18:37:35 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.131 (still bad) 2008-Dec-13 18:37:37 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.131 (still bad) 2008-Dec-13 18:37:39 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.130 (still bad) 2008-Dec-13 18:37:41 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.126 (still bad) 2008-Dec-13 18:37:43 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.126 (still bad) 2008-Dec-13 18:37:45 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.125 (still bad) 2008-Dec-13 18:37:47 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.124 (still bad) 2008-Dec-13 18:37:49 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.124 (still bad) 2008-Dec-13 18:37:51 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.125 (still bad) 2008-Dec-13 18:37:53 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.123 (still bad) 2008-Dec-13 18:37:55 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.123 (still bad) 2008-Dec-13 18:37:57 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2008-Dec-13 18:37:59 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.120 (still bad) 2008-Dec-13 18:38:01 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2008-Dec-13 18:38:03 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.123 (still bad) 2008-Dec-13 18:38:05 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2008-Dec-13 18:38:07 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2008-Dec-13 18:38:09 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.120 (still bad) 2008-Dec-13 18:38:11 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2008-Dec-13 18:38:13 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2008-Dec-13 18:38:15 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2008-Dec-13 18:38:17 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2008-Dec-13 18:38:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2008-Dec-13 18:38:20 LOG4 check_wapp_levels: WAPP-1 power levels: 0.972 0.927 0.907 0.999 2008-Dec-13 18:38:20 LOG4 check_wapp_levels: WAPP-2 power levels: 1.018 0.941 1.106 1.120 2008-Dec-13 18:38:20 LOG4 check_wapp_levels: WAPP-3 power levels: 1.085 1.114 1.109 0.989 2008-Dec-13 18:38:20 LOG4 check_wapp_levels: WAPP-4 power levels: 0.965 0.102 1.061 0.112 2008-Dec-13 18:38:22 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2008-Dec-13 18:38:24 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2008-Dec-13 18:38:26 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2008-Dec-13 18:38:28 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2008-Dec-13 18:38:30 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2008-Dec-13 18:38:32 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2008-Dec-13 18:38:34 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2008-Dec-13 18:38:36 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2008-Dec-13 18:38:37 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Dec-13 18:38:37 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Dec-13 18:38:37 LOG5 end_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2008-Dec-13 18:38:37 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Dec-13 18:38:37 LOG5 end_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2008-Dec-13 18:38:37 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Dec-13 18:38:37 LOG5 finish_task: Level: (2) ID = <10049> Status = 0 0 0 0 ok 2008-Dec-13 18:38:37 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Dec-13 18:38:37 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Dec-13 18:38:37 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Dec-13 18:38:37 LOG5 end_task: Level: (2) ID = <10049> Status = 0 0 0 0 ok 2008-Dec-13 18:38:37 COMMAND run_command_line: EXECUTING command 19: 'ENDIF' 2008-Dec-13 18:38:37 COMMAND run_command_line: EXECUTING command 22: 'IF LSTSLEW(AGES7448_p2_147) < 234626 THEN' 2008-Dec-13 18:38:38 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES7448_p2_147) < 234626 2008-Dec-13 18:38:38 INFO5 is_if_valid: Condition parsed as: 23.756862666666667 < 23.773888888888887 2008-Dec-13 18:38:38 COMMAND run_command_line: EXECUTING command 23: 'FIXEDDRIFT az=75.60 alfaangle=-49.7 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p2_147 ra=225000.00 dec=142000.00' 2008-Dec-13 18:38:38 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Dec-13 18:38:38 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2008-Dec-13 18:38:38 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Dec-13 18:38:38 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 75.60 -49.7 hcorcal 5 tracking no first 1 AGES7448_p2_147 225000.00 142000.00 J 8500.0 Heliocentric velocity(optical)' 2008-Dec-13 18:38:38 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Dec-13 18:38:38 LOG5 begin_task: Level: (2) ID = <10083> Status = 0 0 0 0 ok 2008-Dec-13 18:38:38 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES7448_p2_145' 2008-Dec-13 18:38:38 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Dec-13 18:38:38 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES7448_p2_147} 2008-Dec-13 18:38:38 INFO3 fixed_driftmap: Sending telescope to Az = 75.60 and ZA = 14.00 2008-Dec-13 18:38:38 LOG3 track_source: Calling 'track_source AGES7448_p2_147 75.60 14.0034191973 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Dec-13 18:38:38 START begin_task: Starting task 'sending tracking commands' 2008-Dec-13 18:38:38 LOG5 begin_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2008-Dec-13 18:38:38 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7448_p2_147} INFO {Slewing to source 'AGES7448_p2_147' ...} 2008-Dec-13 18:38:38 INFO1 track_source: Starting to track AGES7448_p2_147 2008-Dec-13 18:38:38 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7448_p2_147" 2008-Dec-13 18:38:38 LOG3 vw_send: To DATATAKING: set ra 75.60 2008-Dec-13 18:38:39 LOG3 vw_send: To DATATAKING: set dec 14.0034191973 2008-Dec-13 18:38:39 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Dec-13 18:38:39 LOG3 vw_send: To DATATAKING: pnt tr 75.60 14.0034191973 -CF 2008-Dec-13 18:38:39 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Dec-13 18:38:39 STOP finish_task: Finishing task 'sending tracking commands' 2008-Dec-13 18:38:39 LOG5 finish_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2008-Dec-13 18:38:39 INFO2 finish_task: DONE finished sending: tracking commands 2008-Dec-13 18:38:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-13 18:38:39 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Dec-13 18:38:39 LOG5 end_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2008-Dec-13 18:38:39 START begin_task: Starting task 'rotate ALFA to -49.7 degrees' 2008-Dec-13 18:38:39 LOG5 begin_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2008-Dec-13 18:38:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -49.7 degrees ...} 2008-Dec-13 18:38:39 INFO2 rotate_alfa: ALFA commanded to -49.7 degrees 2008-Dec-13 18:38:39 LOG3 sock_errsend: To ALFAMOTOR: POSITION -49.7 REPLY 2008-Dec-13 18:38:39 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Dec-13 18:38:39 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Dec-13 18:38:39 LOG5 begin_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2008-Dec-13 18:38:39 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7448_p2_147" 2008-Dec-13 18:38:39 LOG4 got_cormsg: From DATATAKING: set ra 75.60 2008-Dec-13 18:38:39 LOG4 got_cormsg: From DATATAKING: set dec 14.0034191973 2008-Dec-13 18:38:39 LOG4 got_cormsg: From DATATAKING: vw% 75.60 2008-Dec-13 18:38:39 LOG4 got_cormsg: From DATATAKING: vw% 14.0034191973 2008-Dec-13 18:38:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 18:38:39 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Dec-13 18:38:39 LOG4 got_cormsg: From DATATAKING: pnt tr 75.60 14.0034191973 -CF 2008-Dec-13 18:38:39 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Dec-13 18:38:39 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Dec-13 18:38:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 18:38:45 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Dec-13 18:38:45 INFO3 alfa_motor: ALFA rotator in-position -49.70 degrees 2008-Dec-13 18:38:45 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Dec-13 18:38:45 LOG5 end_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2008-Dec-13 18:38:45 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Dec-13 18:38:45 STOP finish_task: Finishing task 'rotate ALFA to -49.7 degrees' 2008-Dec-13 18:38:45 LOG5 finish_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2008-Dec-13 18:38:45 INFO2 finish_task: DONE finished configuration: rotating ALFA to -49.7 degrees 2008-Dec-13 18:38:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-13 18:38:45 STOP end_task: Finishing task 'rotate ALFA to -49.7 degrees' with status 'OK' 2008-Dec-13 18:38:45 LOG5 end_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2008-Dec-13 18:38:45 START begin_task: Starting task 'waiting on telescope' 2008-Dec-13 18:38:45 LOG5 begin_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2008-Dec-13 18:38:45 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Dec-13 18:38:46 LOG3 waittrk: Start waittrk 5 2008-Dec-13 18:38:46 START begin_task: Starting task 'waiting on telescope movement' 2008-Dec-13 18:38:46 LOG5 begin_task: Level: (4) ID = <10088> Status = 0 0 0 0 ok 2008-Dec-13 18:38:51 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Dec-13 18:38:51 LOG5 end_task: Level: (4) ID = <10088> Status = 0 0 0 0 ok 2008-Dec-13 18:38:51 START begin_task: Starting task 'waiting on telescope on source' 2008-Dec-13 18:38:51 LOG5 begin_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2008-Dec-13 18:40:53 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Dec-13 18:40:53 LOG5 end_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2008-Dec-13 18:40:53 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Dec-13 18:40:53 INFO2 waittrk: Now tracking AGES7448_p2_147 2008-Dec-13 18:40:53 LOG4 waittrk: Current telescope position: Az = 435.39 ZA = 14.00 2008-Dec-13 18:40:53 STOP finish_task: Finishing task 'waiting on telescope' 2008-Dec-13 18:40:53 LOG5 finish_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2008-Dec-13 18:40:53 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Dec-13 18:40:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-13 18:40:53 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Dec-13 18:40:53 LOG5 end_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2008-Dec-13 18:40:53 START begin_task: Starting task 'selecting calibration type' 2008-Dec-13 18:40:53 LOG5 begin_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2008-Dec-13 18:40:53 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Dec-13 18:40:53 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Dec-13 18:40:53 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Dec-13 18:40:53 START begin_task: Starting task 'waiting on setcal' 2008-Dec-13 18:40:53 LOG5 begin_task: Level: (4) ID = <10091> Status = 0 0 0 0 ok 2008-Dec-13 18:40:53 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Dec-13 18:40:53 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Dec-13 18:40:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 18:40:55 LOG4 got_cormsg: From DATATAKING: DONE 2008-Dec-13 18:40:55 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Dec-13 18:40:55 LOG5 end_task: Level: (4) ID = <10091> Status = 0 0 0 0 ok 2008-Dec-13 18:40:55 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Dec-13 18:40:55 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Dec-13 18:40:55 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Dec-13 18:40:55 START begin_task: Starting task 'waiting on command to ALFA' 2008-Dec-13 18:40:55 LOG5 begin_task: Level: (4) ID = <10092> Status = 0 0 0 0 ok 2008-Dec-13 18:40:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 18:40:55 LOG4 got_alfamon: From ALFAMON: ACK 2008-Dec-13 18:40:55 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Dec-13 18:40:55 LOG5 end_task: Level: (4) ID = <10092> Status = 0 0 0 0 ok 2008-Dec-13 18:40:55 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Dec-13 18:40:55 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Dec-13 18:40:55 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Dec-13 18:40:55 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Dec-13 18:40:55 START begin_task: Starting task 'waiting on command to ALFA' 2008-Dec-13 18:40:55 LOG5 begin_task: Level: (4) ID = <10093> Status = 0 0 0 0 ok 2008-Dec-13 18:40:55 LOG4 got_alfamon: From ALFAMON: ACK 2008-Dec-13 18:40:55 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Dec-13 18:40:55 LOG5 end_task: Level: (4) ID = <10093> Status = 0 0 0 0 ok 2008-Dec-13 18:40:55 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Dec-13 18:40:55 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Dec-13 18:40:55 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Dec-13 18:40:55 LOG5 end_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2008-Dec-13 18:40:55 LOG5 dopset_later: Calling 'dopset_later 38.356259616713139' 2008-Dec-13 18:40:55 INFO3 dopset_later: Setting Doppler correction for 18:41:33 (38.4 seconds from now) 2008-Dec-13 18:40:55 LOG5 antvel: Calling 'antvel 75.600000 14.003419 F 38.356259616713139' 2008-Dec-13 18:40:55 LOG2 antvel: Transforming current Az = 75.60 ZA = 14.00 to apparent RA = 22:50:26.9 Dec = +14:23:00.2 2008-Dec-13 18:40:55 LOG2 antvel: Parameters to Doppler: Heliocentric 81693 2008 348 0.0 2008-Dec-13 18:40:55 INFO5 antvel: Computed antenna velocity: +28.47567 km/s 2008-Dec-13 18:40:55 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=28.475666180299999 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Dec-13 18:40:55 INFO4 dopset_gen: New sky frequencies: 1381.112244 1381.112244 1381.112244 1381.112244 1381.112244 1381.112244 1381.112244 1381.112244 1381.112244 2008-Dec-13 18:40:55 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.112244 sky0=1381.112244 sky1=1381.112244 sky2=1381.112244 sky3=1381.112244 sky4=1381.112244 sky5=1381.112244 sky6=1381.112244 sky7=1381.112244 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Dec-13 18:40:55 LOG2 dopset_gen: Result from 'sky2syn': 1631.112244 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Dec-13 18:40:55 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631112244.0} 2008-Dec-13 18:40:55 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-13 18:40:55 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Dec-13 18:40:55 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Dec-13 18:40:55 INFO5 fixed_driftmap: Tracking J2000 position: RA = 22:49:24.9 Dec = +14:20:09.2 2008-Dec-13 18:40:55 LOG3 track_source: Calling 'track_source AGES7448_p2_147 224924.9 142009.2 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Dec-13 18:40:55 START begin_task: Starting task 'sending tracking commands' 2008-Dec-13 18:40:55 LOG5 begin_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2008-Dec-13 18:40:55 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7448_p2_147} INFO {Slewing to source 'AGES7448_p2_147' ...} 2008-Dec-13 18:40:55 INFO1 track_source: Starting to track AGES7448_p2_147 2008-Dec-13 18:40:55 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7448_p2_147" 2008-Dec-13 18:40:55 LOG3 vw_send: To DATATAKING: set ra 224924.9 2008-Dec-13 18:40:55 LOG3 vw_send: To DATATAKING: set dec 142009.2 2008-Dec-13 18:40:55 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Dec-13 18:40:55 LOG3 vw_send: To DATATAKING: pnt tr 224924.9 142009.2 -CJ 2008-Dec-13 18:40:55 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Dec-13 18:40:55 STOP finish_task: Finishing task 'sending tracking commands' 2008-Dec-13 18:40:55 LOG5 finish_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2008-Dec-13 18:40:55 INFO2 finish_task: DONE finished sending: tracking commands 2008-Dec-13 18:40:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-13 18:40:55 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Dec-13 18:40:55 LOG5 end_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2008-Dec-13 18:40:55 START begin_task: Starting task 'waiting on telescope' 2008-Dec-13 18:40:55 LOG5 begin_task: Level: (3) ID = <10095> Status = 0 0 0 0 ok 2008-Dec-13 18:40:55 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Dec-13 18:40:55 LOG3 waittrk: Start waittrk 5 2008-Dec-13 18:40:55 START begin_task: Starting task 'waiting on telescope movement' 2008-Dec-13 18:40:55 LOG5 begin_task: Level: (4) ID = <10096> Status = 0 0 0 0 ok 2008-Dec-13 18:40:56 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631112244.0} 2008-Dec-13 18:40:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-13 18:40:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 18:40:56 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7448_p2_147" 2008-Dec-13 18:40:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 18:40:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 18:40:56 LOG4 got_cormsg: From DATATAKING: set ra 224924.9 2008-Dec-13 18:40:56 LOG4 got_cormsg: From DATATAKING: set dec 142009.2 2008-Dec-13 18:40:56 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Dec-13 18:40:56 LOG4 got_cormsg: From DATATAKING: pnt tr 224924.9 142009.2 -CJ 2008-Dec-13 18:40:56 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Dec-13 18:40:56 LOG4 got_cormsg: From DATATAKING: 224924.9 2008-Dec-13 18:40:56 LOG4 got_cormsg: From DATATAKING: vw% 142009.2 2008-Dec-13 18:40:56 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2008-Dec-13 18:41:01 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Dec-13 18:41:01 LOG5 end_task: Level: (4) ID = <10096> Status = 0 0 0 0 ok 2008-Dec-13 18:41:01 START begin_task: Starting task 'waiting on telescope on source' 2008-Dec-13 18:41:01 LOG5 begin_task: Level: (4) ID = <10097> Status = 0 0 0 0 ok 2008-Dec-13 18:41:03 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Dec-13 18:41:03 LOG5 end_task: Level: (4) ID = <10097> Status = 0 0 0 0 ok 2008-Dec-13 18:41:03 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Dec-13 18:41:03 INFO2 waittrk: Now tracking AGES7448_p2_147 2008-Dec-13 18:41:03 LOG4 waittrk: Current telescope position: Az = 435.42 ZA = 14.02 2008-Dec-13 18:41:03 STOP finish_task: Finishing task 'waiting on telescope' 2008-Dec-13 18:41:03 LOG5 finish_task: Level: (3) ID = <10095> Status = 0 0 0 0 ok 2008-Dec-13 18:41:03 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Dec-13 18:41:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-13 18:41:03 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Dec-13 18:41:03 LOG5 end_task: Level: (3) ID = <10095> Status = 0 0 0 0 ok 2008-Dec-13 18:41:03 START begin_task: Starting task 'adjusting WAPP power' 2008-Dec-13 18:41:03 LOG5 begin_task: Level: (3) ID = <10098> Status = 0 0 0 0 ok 2008-Dec-13 18:41:03 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Dec-13 18:41:03 INFO2 adjust_power: Starting to adjust WAPP power 2008-Dec-13 18:41:03 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Dec-13 18:41:03 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Dec-13 18:41:03 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Dec-13 18:41:03 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Dec-13 18:41:03 LOG5 begin_task: Level: (4) ID = <10099> Status = 0 0 0 0 ok 2008-Dec-13 18:41:03 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Dec-13 18:41:03 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Dec-13 18:41:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 18:41:06 LOG4 got_cormsg: From DATATAKING: DONE 2008-Dec-13 18:41:06 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Dec-13 18:41:06 LOG5 end_task: Level: (4) ID = <10099> Status = 0 0 0 0 ok 2008-Dec-13 18:41:06 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Dec-13 18:41:06 START begin_task: Starting task 'adjusting WAPP power' 2008-Dec-13 18:41:06 LOG5 begin_task: Level: (4) ID = <10100> Status = 0 0 0 0 ok 2008-Dec-13 18:41:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Dec-13 18:41:06 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Dec-13 18:41:06 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Dec-13 18:41:06 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Dec-13 18:41:06 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Dec-13 18:41:06 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Dec-13 18:41:06 LOG5 begin_task: Level: (5) ID = <10101> Status = 0 0 0 0 ok 2008-Dec-13 18:41:06 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Dec-13 18:41:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 18:41:07 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 7 6 dB 2008-Dec-13 18:41:07 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 1 dB --- beam 5: 6 5 dB 2008-Dec-13 18:41:07 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Dec-13 18:41:07 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2008-Dec-13 18:41:07 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Dec-13 18:41:07 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Dec-13 18:41:07 LOG5 end_task: Level: (5) ID = <10101> Status = 0 0 0 0 ok 2008-Dec-13 18:41:07 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.024 0.974 ALFA beam 1: 0.966 1.049 2008-Dec-13 18:41:07 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.072 0.979 ALFA beam 3: 0.896 0.940 2008-Dec-13 18:41:07 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.912 0.944 ALFA beam 5: 0.929 1.057 2008-Dec-13 18:41:07 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.040 0.103 ALFA beam 7: 0.916 0.114 2008-Dec-13 18:41:07 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Dec-13 18:41:07 LOG5 finish_task: Level: (4) ID = <10100> Status = 0 0 0 0 ok 2008-Dec-13 18:41:07 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Dec-13 18:41:07 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-13 18:41:07 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Dec-13 18:41:07 LOG5 end_task: Level: (4) ID = <10100> Status = 0 0 0 0 ok 2008-Dec-13 18:41:07 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Dec-13 18:41:07 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Dec-13 18:41:07 LOG5 finish_task: Level: (3) ID = <10098> Status = 0 0 0 0 ok 2008-Dec-13 18:41:07 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Dec-13 18:41:07 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-13 18:41:07 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Dec-13 18:41:07 LOG5 end_task: Level: (3) ID = <10098> Status = 0 0 0 0 ok 2008-Dec-13 18:41:07 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Matthew Smith 2008-Dec-13 18:41:07 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Matthew Smith 2008-Dec-13 18:41:07 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Matthew Smith 2008-Dec-13 18:41:07 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Matthew Smith 2008-Dec-13 18:41:07 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Dec-13 18:41:07 START begin_task: Starting task 'WAPP calibration' 2008-Dec-13 18:41:07 LOG5 begin_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2008-Dec-13 18:41:07 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Dec-13 18:41:07 START begin_task: Starting task 'selecting calibration type' 2008-Dec-13 18:41:07 LOG5 begin_task: Level: (4) ID = <10103> Status = 0 0 0 0 ok 2008-Dec-13 18:41:07 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Dec-13 18:41:07 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Dec-13 18:41:07 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Dec-13 18:41:07 START begin_task: Starting task 'waiting on setcal' 2008-Dec-13 18:41:07 LOG5 begin_task: Level: (5) ID = <10104> Status = 0 0 0 0 ok 2008-Dec-13 18:41:07 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Matthew Smith' 2008-Dec-13 18:41:07 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Dec-13 18:41:07 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Dec-13 18:41:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 18:41:07 LOG4 got_cormsg: From DATATAKING: DONE 2008-Dec-13 18:41:07 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Dec-13 18:41:07 LOG5 end_task: Level: (5) ID = <10104> Status = 0 0 0 0 ok 2008-Dec-13 18:41:07 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Dec-13 18:41:07 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Dec-13 18:41:08 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Dec-13 18:41:08 START begin_task: Starting task 'waiting on command to ALFA' 2008-Dec-13 18:41:08 LOG5 begin_task: Level: (5) ID = <10105> Status = 0 0 0 0 ok 2008-Dec-13 18:41:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 18:41:08 LOG4 got_alfamon: From ALFAMON: ACK 2008-Dec-13 18:41:08 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Dec-13 18:41:08 LOG5 end_task: Level: (5) ID = <10105> Status = 0 0 0 0 ok 2008-Dec-13 18:41:08 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Dec-13 18:41:08 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Dec-13 18:41:08 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Dec-13 18:41:08 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Dec-13 18:41:08 START begin_task: Starting task 'waiting on command to ALFA' 2008-Dec-13 18:41:08 LOG5 begin_task: Level: (5) ID = <10106> Status = 0 0 0 0 ok 2008-Dec-13 18:41:08 LOG4 got_alfamon: From ALFAMON: ACK 2008-Dec-13 18:41:08 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Dec-13 18:41:08 LOG5 end_task: Level: (5) ID = <10106> Status = 0 0 0 0 ok 2008-Dec-13 18:41:08 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Dec-13 18:41:08 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Dec-13 18:41:08 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Dec-13 18:41:08 LOG5 end_task: Level: (4) ID = <10103> Status = 0 0 0 0 ok 2008-Dec-13 18:41:08 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Dec-13 18:41:08 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Dec-13 18:41:08 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Dec-13 18:41:08 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Dec-13 18:41:08 LOG5 begin_task: Level: (4) ID = <10107> Status = 0 0 0 0 ok 2008-Dec-13 18:41:08 NOTE WAPPDATA-new_file: New FITS file: wapp.20081213.a2048.0002.fits 2008-Dec-13 18:41:08 LOG3 CALCONTROL-caltrig: Software trigger 2008-Dec-13 18:41:08 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081213.a2048.0002.fits} 2008-Dec-13 18:41:08 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Dec-13 18:41:08 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Dec-13 18:41:08 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Dec-13 18:41:08 LOG5 end_task: Level: (4) ID = <10107> Status = 0 0 0 0 ok 2008-Dec-13 18:41:08 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Dec-13 18:41:08 LOG4 take_data: Calling 'take_data 5 5 CAL ON -' 2008-Dec-13 18:41:08 START begin_task: Starting task 'WAPP spectral observation' 2008-Dec-13 18:41:08 LOG5 begin_task: Level: (4) ID = <10108> Status = 0 0 0 0 ok 2008-Dec-13 18:41:08 LOG5 log_alfabeam: Parameters: 22.823583333333332 14.335888888888892 23.767255 2008.9549036682131 -49.700058 2008-Dec-13 18:41:08 LOG4 log_alfabeam: ALFABEAM 0 22.823583333333332 14.335888888888899 2008-Dec-13 18:41:08 LOG4 log_alfabeam: ALFABEAM 1 22.822905868866570 14.427234044323768 2008-Dec-13 18:41:08 LOG4 log_alfabeam: ALFABEAM 2 22.816990778065453 14.366794144108033 2008-Dec-13 18:41:08 LOG4 log_alfabeam: ALFABEAM 3 22.817697571789303 14.274875863654652 2008-Dec-13 18:41:08 LOG4 log_alfabeam: ALFABEAM 4 22.824302273495405 14.244493319823206 2008-Dec-13 18:41:08 LOG4 log_alfabeam: ALFABEAM 5 22.830175513297359 14.305656591188345 2008-Dec-13 18:41:08 LOG4 log_alfabeam: ALFABEAM 6 22.829485955827661 14.396479995993399 2008-Dec-13 18:41:08 INFO2 take_data: Starting WAPP scan: 834800037 2008-Dec-13 18:41:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Dec-13 18:41:09 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Dec-13 18:41:09 LOG5 begin_task: Level: (5) ID = <10109> Status = 0 0 0 0 ok 2008-Dec-13 18:41:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Dec-13 18:41:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2008-Dec-13 18:41:09 LOG4 check_wapp_levels: WAPP-1 power levels: 1.024 0.974 0.966 1.049 2008-Dec-13 18:41:09 LOG4 check_wapp_levels: WAPP-2 power levels: 1.072 0.979 0.896 0.940 2008-Dec-13 18:41:09 LOG4 check_wapp_levels: WAPP-3 power levels: 0.912 0.944 0.929 1.057 2008-Dec-13 18:41:09 LOG4 check_wapp_levels: WAPP-4 power levels: 1.040 0.103 0.916 0.114 2008-Dec-13 18:41:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81670.00 2008-Dec-13 18:41:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.112244 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Dec-13 18:41:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.112244 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 18:41:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.112244 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 18:41:15 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.414 (still bad) 2008-Dec-13 18:41:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.112244 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Dec-13 18:41:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.112244 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 18:41:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.112244 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Dec-13 18:41:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.112244 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Dec-13 18:41:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.112244 MHz Flip = 1 Band = 0 Mixer = 1990.000000 MHz 2008-Dec-13 18:41:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.112244 MHz Flip = 1 Band = 0 Mixer = 2000.000000 MHz 2008-Dec-13 18:41:15 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Dec-13 18:41:15 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Dec-13 18:41:15 LOG5 end_task: Level: (5) ID = <10109> Status = 0 0 0 0 ok 2008-Dec-13 18:41:15 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Dec-13 18:41:15 LOG5 end_task: Level: (4) ID = <10108> Status = 0 0 0 0 ok 2008-Dec-13 18:41:15 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Dec-13 18:41:15 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Dec-13 18:41:15 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Dec-13 18:41:15 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Dec-13 18:41:15 LOG5 begin_task: Level: (4) ID = <10110> Status = 0 0 0 0 ok 2008-Dec-13 18:41:16 LOG3 CALCONTROL-caltrig: Software trigger 2008-Dec-13 18:41:16 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Dec-13 18:41:16 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Dec-13 18:41:16 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Dec-13 18:41:16 LOG5 end_task: Level: (4) ID = <10110> Status = 0 0 0 0 ok 2008-Dec-13 18:41:16 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Dec-13 18:41:16 LOG4 take_data: Calling 'take_data 5 5 CAL OFF -' 2008-Dec-13 18:41:16 START begin_task: Starting task 'WAPP spectral observation' 2008-Dec-13 18:41:16 LOG5 begin_task: Level: (4) ID = <10111> Status = 0 0 0 0 ok 2008-Dec-13 18:41:16 LOG5 log_alfabeam: Parameters: 22.823583333333332 14.335888888888892 23.769205 2008.9549038900298 -49.700058 2008-Dec-13 18:41:16 LOG4 log_alfabeam: ALFABEAM 0 22.823583333333332 14.335888888888892 2008-Dec-13 18:41:16 LOG4 log_alfabeam: ALFABEAM 1 22.822908931979157 14.427238947378363 2008-Dec-13 18:41:16 LOG4 log_alfabeam: ALFABEAM 2 22.816991826755828 14.366840737830630 2008-Dec-13 18:41:16 LOG4 log_alfabeam: ALFABEAM 3 22.817695485856333 14.274918494476692 2008-Dec-13 18:41:16 LOG4 log_alfabeam: ALFABEAM 4 22.824299127482998 14.244488219180001 2008-Dec-13 18:41:16 LOG4 log_alfabeam: ALFABEAM 5 22.830174483484502 14.305608578907846 2008-Dec-13 18:41:16 LOG4 log_alfabeam: ALFABEAM 6 22.829488000255573 14.396438019202423 2008-Dec-13 18:41:16 INFO2 take_data: Starting WAPP scan: 834800038 2008-Dec-13 18:41:16 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Dec-13 18:41:16 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Dec-13 18:41:16 LOG5 begin_task: Level: (5) ID = <10112> Status = 0 0 0 0 ok 2008-Dec-13 18:41:16 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Dec-13 18:41:16 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81677.00 2008-Dec-13 18:41:21 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.453 (still bad) 2008-Dec-13 18:41:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.112244 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Dec-13 18:41:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.112244 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 18:41:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.112244 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 18:41:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.112244 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Dec-13 18:41:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.112244 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 18:41:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.112244 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Dec-13 18:41:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.112244 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Dec-13 18:41:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.112244 MHz Flip = 1 Band = 0 Mixer = 1990.000000 MHz 2008-Dec-13 18:41:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.112244 MHz Flip = 1 Band = 0 Mixer = 2000.000000 MHz 2008-Dec-13 18:41:22 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Dec-13 18:41:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Dec-13 18:41:22 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Dec-13 18:41:22 LOG5 end_task: Level: (5) ID = <10112> Status = 0 0 0 0 ok 2008-Dec-13 18:41:22 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Dec-13 18:41:22 LOG5 end_task: Level: (4) ID = <10111> Status = 0 0 0 0 ok 2008-Dec-13 18:41:22 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Dec-13 18:41:22 STOP finish_task: Finishing task 'WAPP calibration' 2008-Dec-13 18:41:22 LOG5 finish_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2008-Dec-13 18:41:22 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Dec-13 18:41:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-13 18:41:22 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Dec-13 18:41:22 LOG5 end_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2008-Dec-13 18:41:23 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Dec-13 18:41:23 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 75.60 and ZA = 14.00 2008-Dec-13 18:41:23 LOG3 track_source: Calling 'track_source AGES7448_p2_147 75.60 14.0034191973 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Dec-13 18:41:23 START begin_task: Starting task 'sending tracking commands' 2008-Dec-13 18:41:23 LOG5 begin_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2008-Dec-13 18:41:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7448_p2_147} INFO {Slewing to source 'AGES7448_p2_147' ...} 2008-Dec-13 18:41:23 INFO1 track_source: Starting to track AGES7448_p2_147 2008-Dec-13 18:41:23 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7448_p2_147" 2008-Dec-13 18:41:23 LOG3 vw_send: To DATATAKING: set ra 75.60 2008-Dec-13 18:41:23 LOG3 vw_send: To DATATAKING: set dec 14.0034191973 2008-Dec-13 18:41:23 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Dec-13 18:41:23 LOG3 vw_send: To DATATAKING: pnt tr 75.60 14.0034191973 -CF 2008-Dec-13 18:41:23 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Dec-13 18:41:23 STOP finish_task: Finishing task 'sending tracking commands' 2008-Dec-13 18:41:23 LOG5 finish_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2008-Dec-13 18:41:23 INFO2 finish_task: DONE finished sending: tracking commands 2008-Dec-13 18:41:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-13 18:41:23 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Dec-13 18:41:23 LOG5 end_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2008-Dec-13 18:41:23 LOG1 fixed_driftmap: Parameters: HA = +00:56:00.6 Start = 23:46:27.5 LST = 23:46:16.2 diff = 11.4 secs 2008-Dec-13 18:41:23 INFO2 fixed_driftmap: Waiting 9.4 seconds for RA 22:50:27 2008-Dec-13 18:41:23 INFO2 lstwait: Waiting for 9.4 secs from LST 23:46:16 to LST 23:46:26 ... 2008-Dec-13 18:41:23 LOG4 send_obs_status: To obs_status: <1> TASKTIME 9.3636378055209057 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Dec-13 18:41:23 START begin_task: Starting task 'waiting on wait on LST' 2008-Dec-13 18:41:23 LOG5 begin_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2008-Dec-13 18:41:23 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7448_p2_147" 2008-Dec-13 18:41:23 LOG4 got_cormsg: From DATATAKING: set ra 75.60 2008-Dec-13 18:41:23 LOG4 got_cormsg: From DATATAKING: set dec 14.0034191973 2008-Dec-13 18:41:23 LOG4 got_cormsg: From DATATAKING: vw% 75.60 2008-Dec-13 18:41:23 LOG4 got_cormsg: From DATATAKING: vw% 14.0034191973 2008-Dec-13 18:41:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 18:41:23 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Dec-13 18:41:23 LOG4 got_cormsg: From DATATAKING: pnt tr 75.60 14.0034191973 -CF 2008-Dec-13 18:41:23 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Dec-13 18:41:23 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Dec-13 18:41:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 18:41:27 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.071 (still bad) 2008-Dec-13 18:41:32 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Dec-13 18:41:32 LOG5 end_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2008-Dec-13 18:41:32 LOG4 lstwait: Finished waiting 0.64 seconds late 2008-Dec-13 18:41:32 INFO3 lstwait: Finished waiting 2008-Dec-13 18:41:32 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Dec-13 18:41:32 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Dec-13 18:41:32 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Dec-13 18:41:32 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Dec-13 18:41:32 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Dec-13 18:41:32 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ -' 2008-Dec-13 18:41:32 START begin_task: Starting task 'WAPP spectral observation' 2008-Dec-13 18:41:32 LOG5 begin_task: Level: (3) ID = <10115> Status = 0 0 0 0 ok 2008-Dec-13 18:41:32 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Dec-13 18:41:32 INFO2 take_data: Starting WAPP scan: 834800039 2008-Dec-13 18:41:33 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Dec-13 18:41:33 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Dec-13 18:41:33 LOG5 begin_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2008-Dec-13 18:41:33 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Dec-13 18:41:33 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81694.00 2008-Dec-13 18:41:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.112244 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Dec-13 18:41:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.112244 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 18:41:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.112244 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 18:41:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.112244 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Dec-13 18:41:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.112244 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 18:41:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.112244 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Dec-13 18:41:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.112244 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Dec-13 18:41:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.112244 MHz Flip = 1 Band = 0 Mixer = 1990.000000 MHz 2008-Dec-13 18:41:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.112244 MHz Flip = 1 Band = 0 Mixer = 2000.000000 MHz 2008-Dec-13 18:41:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.071 (still bad) 2008-Dec-13 18:41:37 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.350 (still bad) 2008-Dec-13 18:41:39 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.323 (still bad) 2008-Dec-13 18:41:41 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.244 (still bad) 2008-Dec-13 18:41:43 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.178 (still bad) 2008-Dec-13 18:41:45 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.130 (still bad) 2008-Dec-13 18:41:47 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.120 (still bad) 2008-Dec-13 18:41:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.206 (still bad) 2008-Dec-13 18:41:51 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.332 (still bad) 2008-Dec-13 18:41:53 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.446 (still bad) 2008-Dec-13 18:41:55 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.558 (still bad) 2008-Dec-13 18:41:57 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.645 (still bad) 2008-Dec-13 18:41:59 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.663 (still bad) 2008-Dec-13 18:42:01 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.605 (still bad) 2008-Dec-13 18:42:03 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.512 (still bad) 2008-Dec-13 18:42:05 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.391 (still bad) 2008-Dec-13 18:42:07 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.269 (still bad) 2008-Dec-13 18:42:09 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.166 (still bad) 2008-Dec-13 18:42:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2008-Dec-13 18:42:11 LOG4 check_wapp_levels: WAPP-1 power levels: 1.092 1.050 0.969 1.055 2008-Dec-13 18:42:11 LOG4 check_wapp_levels: WAPP-2 power levels: 1.127 1.036 0.916 0.946 2008-Dec-13 18:42:11 LOG4 check_wapp_levels: WAPP-3 power levels: 0.912 0.943 0.921 1.065 2008-Dec-13 18:42:11 LOG4 check_wapp_levels: WAPP-4 power levels: 1.033 0.103 0.910 0.114 2008-Dec-13 18:42:13 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.167 (still bad) 2008-Dec-13 18:42:15 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.215 (still bad) 2008-Dec-13 18:42:18 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.257 (still bad) 2008-Dec-13 18:42:20 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.298 (still bad) 2008-Dec-13 18:42:22 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.332 (still bad) 2008-Dec-13 18:42:24 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.335 (still bad) 2008-Dec-13 18:42:26 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.318 (still bad) 2008-Dec-13 18:42:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.278 (still bad) 2008-Dec-13 18:42:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.219 (still bad) 2008-Dec-13 18:42:32 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.164 (still bad) 2008-Dec-13 18:42:34 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.116 (still bad) 2008-Dec-13 18:42:36 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.088 (still bad) 2008-Dec-13 18:42:38 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.083 (still bad) 2008-Dec-13 18:42:40 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.091 (still bad) 2008-Dec-13 18:42:42 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.096 (still bad) 2008-Dec-13 18:42:44 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.107 (still bad) 2008-Dec-13 18:42:46 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.111 (still bad) 2008-Dec-13 18:42:48 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2008-Dec-13 18:42:50 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.099 (still bad) 2008-Dec-13 18:42:52 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.090 (still bad) 2008-Dec-13 18:42:54 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.078 (still bad) 2008-Dec-13 18:42:56 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.069 (still bad) 2008-Dec-13 18:42:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.066 (still bad) 2008-Dec-13 18:43:00 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.066 (still bad) 2008-Dec-13 18:43:02 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.068 (still bad) 2008-Dec-13 18:43:04 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.071 (still bad) 2008-Dec-13 18:43:06 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.066 (still bad) 2008-Dec-13 18:43:08 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.064 (still bad) 2008-Dec-13 18:43:10 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.060 (still bad) 2008-Dec-13 18:43:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2008-Dec-13 18:43:12 LOG4 check_wapp_levels: WAPP-1 power levels: 1.011 0.964 0.947 1.035 2008-Dec-13 18:43:12 LOG4 check_wapp_levels: WAPP-2 power levels: 1.055 0.974 0.902 0.930 2008-Dec-13 18:43:12 LOG4 check_wapp_levels: WAPP-3 power levels: 0.896 0.930 0.909 1.043 2008-Dec-13 18:43:12 LOG4 check_wapp_levels: WAPP-4 power levels: 1.020 0.103 0.899 0.114 2008-Dec-13 18:43:14 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.056 (still bad) 2008-Dec-13 18:43:16 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.058 (still bad) 2008-Dec-13 18:43:18 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.055 (still bad) 2008-Dec-13 18:43:20 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.056 (still bad) 2008-Dec-13 18:43:22 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.055 (still bad) 2008-Dec-13 18:43:24 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.053 (still bad) 2008-Dec-13 18:43:26 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.057 (still bad) 2008-Dec-13 18:43:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.056 (still bad) 2008-Dec-13 18:43:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.053 (still bad) 2008-Dec-13 18:43:32 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.053 (still bad) 2008-Dec-13 18:43:34 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.055 (still bad) 2008-Dec-13 18:43:36 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.055 (still bad) 2008-Dec-13 18:43:38 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.069 (still bad) 2008-Dec-13 18:43:40 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.056 (still bad) 2008-Dec-13 18:43:43 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.054 (still bad) 2008-Dec-13 18:43:45 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.057 (still bad) 2008-Dec-13 18:43:47 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.053 (still bad) 2008-Dec-13 18:43:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.054 (still bad) 2008-Dec-13 18:43:51 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.068 (still bad) 2008-Dec-13 18:43:53 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.054 (still bad) 2008-Dec-13 18:43:55 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.052 (still bad) 2008-Dec-13 18:43:57 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.054 (still bad) 2008-Dec-13 18:43:59 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.052 (still bad) 2008-Dec-13 18:44:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.054 (still bad) 2008-Dec-13 18:44:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.054 (still bad) 2008-Dec-13 18:44:05 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.052 (still bad) 2008-Dec-13 18:44:07 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.053 (still bad) 2008-Dec-13 18:44:09 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.053 (still bad) 2008-Dec-13 18:44:11 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.052 (still bad) 2008-Dec-13 18:44:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2008-Dec-13 18:44:13 LOG4 check_wapp_levels: WAPP-1 power levels: 1.006 0.961 0.945 1.033 2008-Dec-13 18:44:13 LOG4 check_wapp_levels: WAPP-2 power levels: 1.051 0.974 0.899 0.928 2008-Dec-13 18:44:13 LOG4 check_wapp_levels: WAPP-3 power levels: 0.891 0.927 0.904 1.042 2008-Dec-13 18:44:13 LOG4 check_wapp_levels: WAPP-4 power levels: 1.016 0.103 0.894 0.114 2008-Dec-13 18:44:15 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.054 (still bad) 2008-Dec-13 18:44:17 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.052 (still bad) 2008-Dec-13 18:44:19 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.051 (still bad) 2008-Dec-13 18:44:21 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.052 (still bad) 2008-Dec-13 18:44:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.052 (still bad) 2008-Dec-13 18:44:25 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.054 (still bad) 2008-Dec-13 18:44:27 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.057 (still bad) 2008-Dec-13 18:44:29 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.054 (still bad) 2008-Dec-13 18:44:31 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.092 (still bad) 2008-Dec-13 18:44:33 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.053 (still bad) 2008-Dec-13 18:44:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.053 (still bad) 2008-Dec-13 18:44:37 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.054 (still bad) 2008-Dec-13 18:44:39 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.055 (still bad) 2008-Dec-13 18:44:41 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.053 (still bad) 2008-Dec-13 18:44:43 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.052 (still bad) 2008-Dec-13 18:44:45 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.053 (still bad) 2008-Dec-13 18:44:47 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.051 (still bad) 2008-Dec-13 18:44:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.054 (still bad) 2008-Dec-13 18:44:51 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.057 (still bad) 2008-Dec-13 18:44:53 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.054 (still bad) 2008-Dec-13 18:44:55 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.054 (still bad) 2008-Dec-13 18:44:57 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.052 (still bad) 2008-Dec-13 18:44:59 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.053 (still bad) 2008-Dec-13 18:45:01 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.055 (still bad) 2008-Dec-13 18:45:03 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.057 (still bad) 2008-Dec-13 18:45:06 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.052 (still bad) 2008-Dec-13 18:45:08 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.055 (still bad) 2008-Dec-13 18:45:10 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.055 (still bad) 2008-Dec-13 18:45:12 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.053 (still bad) 2008-Dec-13 18:45:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2008-Dec-13 18:45:14 LOG4 check_wapp_levels: WAPP-1 power levels: 1.010 0.964 0.950 1.040 2008-Dec-13 18:45:14 LOG4 check_wapp_levels: WAPP-2 power levels: 1.065 0.993 0.904 0.932 2008-Dec-13 18:45:14 LOG4 check_wapp_levels: WAPP-3 power levels: 0.895 0.933 0.906 1.046 2008-Dec-13 18:45:14 LOG4 check_wapp_levels: WAPP-4 power levels: 1.020 0.104 0.898 0.114 2008-Dec-13 18:45:16 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.054 (still bad) 2008-Dec-13 18:45:18 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.054 (still bad) 2008-Dec-13 18:45:20 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.057 (still bad) 2008-Dec-13 18:45:22 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.053 (still bad) 2008-Dec-13 18:45:24 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.055 (still bad) 2008-Dec-13 18:45:26 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.069 (still bad) 2008-Dec-13 18:45:28 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.054 (still bad) 2008-Dec-13 18:45:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.053 (still bad) 2008-Dec-13 18:45:32 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.057 (still bad) 2008-Dec-13 18:45:34 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.054 (still bad) 2008-Dec-13 18:45:36 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.053 (still bad) 2008-Dec-13 18:45:38 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.067 (still bad) 2008-Dec-13 18:45:40 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.056 (still bad) 2008-Dec-13 18:45:42 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.055 (still bad) 2008-Dec-13 18:45:44 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.056 (still bad) 2008-Dec-13 18:45:46 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.053 (still bad) 2008-Dec-13 18:45:48 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.055 (still bad) 2008-Dec-13 18:45:50 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.068 (still bad) 2008-Dec-13 18:45:52 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.055 (still bad) 2008-Dec-13 18:45:54 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.052 (still bad) 2008-Dec-13 18:45:56 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.055 (still bad) 2008-Dec-13 18:45:58 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.054 (still bad) 2008-Dec-13 18:46:00 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.056 (still bad) 2008-Dec-13 18:46:02 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.067 (still bad) 2008-Dec-13 18:46:04 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.054 (still bad) 2008-Dec-13 18:46:06 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.054 (still bad) 2008-Dec-13 18:46:08 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.055 (still bad) 2008-Dec-13 18:46:10 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.051 (still bad) 2008-Dec-13 18:46:12 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.053 (still bad) 2008-Dec-13 18:46:14 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.067 (still bad) 2008-Dec-13 18:46:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2008-Dec-13 18:46:16 LOG4 check_wapp_levels: WAPP-1 power levels: 1.010 0.968 0.953 1.044 2008-Dec-13 18:46:16 LOG4 check_wapp_levels: WAPP-2 power levels: 1.053 0.993 0.907 0.931 2008-Dec-13 18:46:16 LOG4 check_wapp_levels: WAPP-3 power levels: 0.895 0.934 0.909 1.044 2008-Dec-13 18:46:16 LOG4 check_wapp_levels: WAPP-4 power levels: 1.021 0.104 0.899 0.114 2008-Dec-13 18:46:18 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.053 (still bad) 2008-Dec-13 18:46:20 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.056 (still bad) 2008-Dec-13 18:46:22 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.052 (still bad) 2008-Dec-13 18:46:24 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.054 (still bad) 2008-Dec-13 18:46:26 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.067 (still bad) 2008-Dec-13 18:46:28 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.054 (still bad) 2008-Dec-13 18:46:30 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.052 (still bad) 2008-Dec-13 18:46:33 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.055 (still bad) 2008-Dec-13 18:46:35 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.053 (still bad) 2008-Dec-13 18:46:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.055 (still bad) 2008-Dec-13 18:46:39 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.066 (still bad) 2008-Dec-13 18:46:41 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.056 (still bad) 2008-Dec-13 18:46:43 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.055 (still bad) 2008-Dec-13 18:46:45 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.056 (still bad) 2008-Dec-13 18:46:47 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.056 (still bad) 2008-Dec-13 18:46:49 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.056 (still bad) 2008-Dec-13 18:46:51 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.069 (still bad) 2008-Dec-13 18:46:53 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.057 (still bad) 2008-Dec-13 18:46:55 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.056 (still bad) 2008-Dec-13 18:46:57 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.058 (still bad) 2008-Dec-13 18:46:59 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.057 (still bad) 2008-Dec-13 18:47:01 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.057 (still bad) 2008-Dec-13 18:47:03 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.061 (still bad) 2008-Dec-13 18:47:05 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.058 (still bad) 2008-Dec-13 18:47:07 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.057 (still bad) 2008-Dec-13 18:47:09 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.059 (still bad) 2008-Dec-13 18:47:11 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.059 (still bad) 2008-Dec-13 18:47:13 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.057 (still bad) 2008-Dec-13 18:47:15 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.061 (still bad) 2008-Dec-13 18:47:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2008-Dec-13 18:47:17 LOG4 check_wapp_levels: WAPP-1 power levels: 1.015 0.967 0.955 1.045 2008-Dec-13 18:47:17 LOG4 check_wapp_levels: WAPP-2 power levels: 1.056 0.994 0.908 0.935 2008-Dec-13 18:47:17 LOG4 check_wapp_levels: WAPP-3 power levels: 0.895 0.932 0.911 1.044 2008-Dec-13 18:47:17 LOG4 check_wapp_levels: WAPP-4 power levels: 1.026 0.104 0.902 0.114 2008-Dec-13 18:47:19 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.056 (still bad) 2008-Dec-13 18:47:21 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.075 (still bad) 2008-Dec-13 18:47:23 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.056 (still bad) 2008-Dec-13 18:47:25 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.059 (still bad) 2008-Dec-13 18:47:27 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.063 (still bad) 2008-Dec-13 18:47:29 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.056 (still bad) 2008-Dec-13 18:47:31 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.056 (still bad) 2008-Dec-13 18:47:33 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.059 (still bad) 2008-Dec-13 18:47:35 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.059 (still bad) 2008-Dec-13 18:47:37 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.061 (still bad) 2008-Dec-13 18:47:39 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.066 (still bad) 2008-Dec-13 18:47:41 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.063 (still bad) 2008-Dec-13 18:47:43 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.062 (still bad) 2008-Dec-13 18:47:45 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.067 (still bad) 2008-Dec-13 18:47:47 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.069 (still bad) 2008-Dec-13 18:47:49 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.071 (still bad) 2008-Dec-13 18:47:51 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.072 (still bad) 2008-Dec-13 18:47:53 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.069 (still bad) 2008-Dec-13 18:47:56 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.067 (still bad) 2008-Dec-13 18:47:58 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.066 (still bad) 2008-Dec-13 18:48:00 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.063 (still bad) 2008-Dec-13 18:48:02 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.064 (still bad) 2008-Dec-13 18:48:04 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.067 (still bad) 2008-Dec-13 18:48:06 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.063 (still bad) 2008-Dec-13 18:48:08 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.061 (still bad) 2008-Dec-13 18:48:10 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.065 (still bad) 2008-Dec-13 18:48:12 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.062 (still bad) 2008-Dec-13 18:48:14 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.065 (still bad) 2008-Dec-13 18:48:16 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.067 (still bad) 2008-Dec-13 18:48:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2008-Dec-13 18:48:18 LOG4 check_wapp_levels: WAPP-1 power levels: 1.017 0.969 0.963 1.051 2008-Dec-13 18:48:18 LOG4 check_wapp_levels: WAPP-2 power levels: 1.062 0.987 0.915 0.935 2008-Dec-13 18:48:18 LOG4 check_wapp_levels: WAPP-3 power levels: 0.902 0.934 0.914 1.045 2008-Dec-13 18:48:18 LOG4 check_wapp_levels: WAPP-4 power levels: 1.028 0.104 0.906 0.114 2008-Dec-13 18:48:20 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.061 (still bad) 2008-Dec-13 18:48:22 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.062 (still bad) 2008-Dec-13 18:48:24 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.059 (still bad) 2008-Dec-13 18:48:26 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.062 (still bad) 2008-Dec-13 18:48:28 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.065 (still bad) 2008-Dec-13 18:48:30 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.058 (still bad) 2008-Dec-13 18:48:32 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.059 (still bad) 2008-Dec-13 18:48:34 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.066 (still bad) 2008-Dec-13 18:48:36 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.070 (still bad) 2008-Dec-13 18:48:38 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.074 (still bad) 2008-Dec-13 18:48:40 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.079 (still bad) 2008-Dec-13 18:48:42 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.073 (still bad) 2008-Dec-13 18:48:44 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.070 (still bad) 2008-Dec-13 18:48:46 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.061 (still bad) 2008-Dec-13 18:48:48 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.059 (still bad) 2008-Dec-13 18:48:50 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.069 (still bad) 2008-Dec-13 18:48:52 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.058 (still bad) 2008-Dec-13 18:48:54 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.056 (still bad) 2008-Dec-13 18:48:56 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.058 (still bad) 2008-Dec-13 18:48:58 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.056 (still bad) 2008-Dec-13 18:49:00 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.057 (still bad) 2008-Dec-13 18:49:02 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.068 (still bad) 2008-Dec-13 18:49:04 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.062 (still bad) 2008-Dec-13 18:49:06 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.059 (still bad) 2008-Dec-13 18:49:08 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.060 (still bad) 2008-Dec-13 18:49:10 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.058 (still bad) 2008-Dec-13 18:49:12 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.057 (still bad) 2008-Dec-13 18:49:14 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.068 (still bad) 2008-Dec-13 18:49:16 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.057 (still bad) 2008-Dec-13 18:49:18 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.055 (still bad) 2008-Dec-13 18:49:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2008-Dec-13 18:49:21 LOG4 check_wapp_levels: WAPP-1 power levels: 1.008 0.964 0.949 1.039 2008-Dec-13 18:49:21 LOG4 check_wapp_levels: WAPP-2 power levels: 1.057 0.982 0.906 0.928 2008-Dec-13 18:49:21 LOG4 check_wapp_levels: WAPP-3 power levels: 0.893 0.931 0.910 1.042 2008-Dec-13 18:49:21 LOG4 check_wapp_levels: WAPP-4 power levels: 1.020 0.104 0.898 0.114 2008-Dec-13 18:49:23 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.052 (still bad) 2008-Dec-13 18:49:25 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.051 (still bad) 2008-Dec-13 18:49:27 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.061 (still bad) 2008-Dec-13 18:49:29 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.053 (still bad) 2008-Dec-13 18:49:31 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.050 (still bad) 2008-Dec-13 18:49:33 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.051 (still bad) 2008-Dec-13 18:49:35 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.048 (still bad) 2008-Dec-13 18:49:37 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.048 (still bad) 2008-Dec-13 18:49:39 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.057 (still bad) 2008-Dec-13 18:49:41 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.048 (still bad) 2008-Dec-13 18:49:43 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.047 (still bad) 2008-Dec-13 18:49:45 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.047 (still bad) 2008-Dec-13 18:49:47 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.045 (still bad) 2008-Dec-13 18:49:49 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.046 (still bad) 2008-Dec-13 18:49:51 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.051 (still bad) 2008-Dec-13 18:49:53 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.046 (still bad) 2008-Dec-13 18:49:55 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.044 (still bad) 2008-Dec-13 18:49:57 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.047 (still bad) 2008-Dec-13 18:49:59 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.044 (still bad) 2008-Dec-13 18:50:01 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.043 (still bad) 2008-Dec-13 18:50:03 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.052 (still bad) 2008-Dec-13 18:50:05 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.047 (still bad) 2008-Dec-13 18:50:07 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.044 (still bad) 2008-Dec-13 18:50:09 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.046 (still bad) 2008-Dec-13 18:50:11 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.044 (still bad) 2008-Dec-13 18:50:13 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.044 (still bad) 2008-Dec-13 18:50:15 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.054 (still bad) 2008-Dec-13 18:50:17 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.046 (still bad) 2008-Dec-13 18:50:19 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.045 (still bad) 2008-Dec-13 18:50:21 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.045 (still bad) 2008-Dec-13 18:50:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2008-Dec-13 18:50:23 LOG4 check_wapp_levels: WAPP-1 power levels: 1.004 0.959 0.939 1.029 2008-Dec-13 18:50:23 LOG4 check_wapp_levels: WAPP-2 power levels: 1.045 0.973 0.900 0.923 2008-Dec-13 18:50:23 LOG4 check_wapp_levels: WAPP-3 power levels: 0.885 0.920 0.902 1.030 2008-Dec-13 18:50:23 LOG4 check_wapp_levels: WAPP-4 power levels: 1.008 0.104 0.887 0.114 2008-Dec-13 18:50:25 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.045 (still bad) 2008-Dec-13 18:50:27 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.054 (still bad) 2008-Dec-13 18:50:29 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.045 (still bad) 2008-Dec-13 18:50:31 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.041 (still bad) 2008-Dec-13 18:50:33 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.046 (still bad) 2008-Dec-13 18:50:35 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.044 (still bad) 2008-Dec-13 18:50:37 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.044 (still bad) 2008-Dec-13 18:50:39 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.053 (still bad) 2008-Dec-13 18:50:41 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.044 (still bad) 2008-Dec-13 18:50:43 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.045 (still bad) 2008-Dec-13 18:50:45 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.047 (still bad) 2008-Dec-13 18:50:47 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.044 (still bad) 2008-Dec-13 18:50:50 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.046 (still bad) 2008-Dec-13 18:50:52 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.055 (still bad) 2008-Dec-13 18:50:54 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.045 (still bad) 2008-Dec-13 18:50:56 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.044 (still bad) 2008-Dec-13 18:50:58 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.044 (still bad) 2008-Dec-13 18:51:00 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.041 (still bad) 2008-Dec-13 18:51:02 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.043 (still bad) 2008-Dec-13 18:51:04 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.053 (still bad) 2008-Dec-13 18:51:06 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.041 (still bad) 2008-Dec-13 18:51:08 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.041 (still bad) 2008-Dec-13 18:51:10 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.043 (still bad) 2008-Dec-13 18:51:12 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.041 (still bad) 2008-Dec-13 18:51:14 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.042 (still bad) 2008-Dec-13 18:51:16 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.050 (still bad) 2008-Dec-13 18:51:18 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.039 (still bad) 2008-Dec-13 18:51:20 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.041 (still bad) 2008-Dec-13 18:51:22 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.043 (still bad) 2008-Dec-13 18:51:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2008-Dec-13 18:51:24 LOG4 check_wapp_levels: WAPP-1 power levels: 0.995 0.952 0.937 1.022 2008-Dec-13 18:51:24 LOG4 check_wapp_levels: WAPP-2 power levels: 1.038 0.969 0.895 0.917 2008-Dec-13 18:51:24 LOG4 check_wapp_levels: WAPP-3 power levels: 0.884 0.918 0.897 1.027 2008-Dec-13 18:51:24 LOG4 check_wapp_levels: WAPP-4 power levels: 1.006 0.104 0.886 0.114 2008-Dec-13 18:51:26 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.040 (still bad) 2008-Dec-13 18:51:28 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.051 (still bad) 2008-Dec-13 18:51:30 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.039 (still bad) 2008-Dec-13 18:51:32 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.036 (still bad) 2008-Dec-13 18:51:34 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.041 (still bad) 2008-Dec-13 18:51:36 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.040 (still bad) 2008-Dec-13 18:51:38 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.038 (still bad) 2008-Dec-13 18:51:40 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.053 (still bad) 2008-Dec-13 18:51:42 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.037 (still bad) 2008-Dec-13 18:51:44 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.037 (still bad) 2008-Dec-13 18:51:46 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.039 (still bad) 2008-Dec-13 18:51:48 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.039 (still bad) 2008-Dec-13 18:51:50 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.040 (still bad) 2008-Dec-13 18:51:52 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.050 (still bad) 2008-Dec-13 18:51:54 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.040 (still bad) 2008-Dec-13 18:51:56 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.039 (still bad) 2008-Dec-13 18:51:58 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.038 (still bad) 2008-Dec-13 18:52:00 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.039 (still bad) 2008-Dec-13 18:52:02 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.042 (still bad) 2008-Dec-13 18:52:04 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.040 (still bad) 2008-Dec-13 18:52:06 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.038 (still bad) 2008-Dec-13 18:52:08 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.040 (still bad) 2008-Dec-13 18:52:10 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.038 (still bad) 2008-Dec-13 18:52:12 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.037 (still bad) 2008-Dec-13 18:52:14 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.043 (still bad) 2008-Dec-13 18:52:17 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.053 (still bad) 2008-Dec-13 18:52:19 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.060 (still bad) 2008-Dec-13 18:52:21 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.072 (still bad) 2008-Dec-13 18:52:23 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.073 (still bad) 2008-Dec-13 18:52:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2008-Dec-13 18:52:25 LOG4 check_wapp_levels: WAPP-1 power levels: 0.995 0.950 0.980 1.072 2008-Dec-13 18:52:25 LOG4 check_wapp_levels: WAPP-2 power levels: 1.038 0.965 0.894 0.918 2008-Dec-13 18:52:25 LOG4 check_wapp_levels: WAPP-3 power levels: 0.882 0.919 0.897 1.027 2008-Dec-13 18:52:25 LOG4 check_wapp_levels: WAPP-4 power levels: 1.007 0.104 0.887 0.114 2008-Dec-13 18:52:27 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.068 (still bad) 2008-Dec-13 18:52:29 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.060 (still bad) 2008-Dec-13 18:52:31 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.043 (still bad) 2008-Dec-13 18:52:33 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.040 (still bad) 2008-Dec-13 18:52:35 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.037 (still bad) 2008-Dec-13 18:52:37 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.039 (still bad) 2008-Dec-13 18:52:39 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.044 (still bad) 2008-Dec-13 18:52:41 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.042 (still bad) 2008-Dec-13 18:52:43 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.042 (still bad) 2008-Dec-13 18:52:45 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.042 (still bad) 2008-Dec-13 18:52:47 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.042 (still bad) 2008-Dec-13 18:52:49 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.045 (still bad) 2008-Dec-13 18:52:51 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.049 (still bad) 2008-Dec-13 18:52:53 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.050 (still bad) 2008-Dec-13 18:52:55 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.048 (still bad) 2008-Dec-13 18:52:57 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.050 (still bad) 2008-Dec-13 18:52:59 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.044 (still bad) 2008-Dec-13 18:53:01 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.045 (still bad) 2008-Dec-13 18:53:03 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.045 (still bad) 2008-Dec-13 18:53:05 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.044 (still bad) 2008-Dec-13 18:53:07 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.040 (still bad) 2008-Dec-13 18:53:09 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.043 (still bad) 2008-Dec-13 18:53:11 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.041 (still bad) 2008-Dec-13 18:53:13 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.043 (still bad) 2008-Dec-13 18:53:15 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.042 (still bad) 2008-Dec-13 18:53:17 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.045 (still bad) 2008-Dec-13 18:53:19 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.042 (still bad) 2008-Dec-13 18:53:21 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.040 (still bad) 2008-Dec-13 18:53:23 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.039 (still bad) 2008-Dec-13 18:53:25 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.040 (still bad) 2008-Dec-13 18:53:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2008-Dec-13 18:53:27 LOG4 check_wapp_levels: WAPP-1 power levels: 0.995 0.953 0.934 1.028 2008-Dec-13 18:53:27 LOG4 check_wapp_levels: WAPP-2 power levels: 1.041 0.964 0.900 0.920 2008-Dec-13 18:53:27 LOG4 check_wapp_levels: WAPP-3 power levels: 0.890 0.928 0.907 1.035 2008-Dec-13 18:53:27 LOG4 check_wapp_levels: WAPP-4 power levels: 1.013 0.104 0.894 0.115 2008-Dec-13 18:53:29 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.040 (still bad) 2008-Dec-13 18:53:31 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.038 (still bad) 2008-Dec-13 18:53:33 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.039 (still bad) 2008-Dec-13 18:53:35 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.040 (still bad) 2008-Dec-13 18:53:37 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.040 (still bad) 2008-Dec-13 18:53:39 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.051 (still bad) 2008-Dec-13 18:53:42 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.041 (still bad) 2008-Dec-13 18:53:44 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.037 (still bad) 2008-Dec-13 18:53:46 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.041 (still bad) 2008-Dec-13 18:53:48 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.039 (still bad) 2008-Dec-13 18:53:50 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.039 (still bad) 2008-Dec-13 18:53:52 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.039 (still bad) 2008-Dec-13 18:53:54 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.038 (still bad) 2008-Dec-13 18:53:56 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.040 (still bad) 2008-Dec-13 18:53:58 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.039 (still bad) 2008-Dec-13 18:54:00 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.038 (still bad) 2008-Dec-13 18:54:02 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.041 (still bad) 2008-Dec-13 18:54:04 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.040 (still bad) 2008-Dec-13 18:54:06 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.042 (still bad) 2008-Dec-13 18:54:08 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.042 (still bad) 2008-Dec-13 18:54:10 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.040 (still bad) 2008-Dec-13 18:54:12 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.041 (still bad) 2008-Dec-13 18:54:14 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.042 (still bad) 2008-Dec-13 18:54:16 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.042 (still bad) 2008-Dec-13 18:54:18 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.040 (still bad) 2008-Dec-13 18:54:20 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.040 (still bad) 2008-Dec-13 18:54:22 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.041 (still bad) 2008-Dec-13 18:54:24 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.040 (still bad) 2008-Dec-13 18:54:26 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.041 (still bad) 2008-Dec-13 18:54:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2008-Dec-13 18:54:28 LOG4 check_wapp_levels: WAPP-1 power levels: 0.996 0.952 0.938 1.026 2008-Dec-13 18:54:28 LOG4 check_wapp_levels: WAPP-2 power levels: 1.042 0.965 0.900 0.917 2008-Dec-13 18:54:28 LOG4 check_wapp_levels: WAPP-3 power levels: 0.880 0.924 0.899 1.029 2008-Dec-13 18:54:28 LOG4 check_wapp_levels: WAPP-4 power levels: 1.008 0.104 0.888 0.115 2008-Dec-13 18:54:30 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.039 (still bad) 2008-Dec-13 18:54:32 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.041 (still bad) 2008-Dec-13 18:54:34 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.039 (still bad) 2008-Dec-13 18:54:36 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.039 (still bad) 2008-Dec-13 18:54:38 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.039 (still bad) 2008-Dec-13 18:54:40 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.039 (still bad) 2008-Dec-13 18:54:42 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.038 (still bad) 2008-Dec-13 18:54:44 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.038 (still bad) 2008-Dec-13 18:54:46 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.038 (still bad) 2008-Dec-13 18:54:48 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.037 (still bad) 2008-Dec-13 18:54:50 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.039 (still bad) 2008-Dec-13 18:54:52 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.041 (still bad) 2008-Dec-13 18:54:54 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.039 (still bad) 2008-Dec-13 18:54:56 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.040 (still bad) 2008-Dec-13 18:54:58 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.037 (still bad) 2008-Dec-13 18:55:00 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.038 (still bad) 2008-Dec-13 18:55:02 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.039 (still bad) 2008-Dec-13 18:55:05 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.043 (still bad) 2008-Dec-13 18:55:07 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.044 (still bad) 2008-Dec-13 18:55:09 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.043 (still bad) 2008-Dec-13 18:55:11 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.048 (still bad) 2008-Dec-13 18:55:13 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.048 (still bad) 2008-Dec-13 18:55:15 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.061 (still bad) 2008-Dec-13 18:55:17 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.050 (still bad) 2008-Dec-13 18:55:19 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.047 (still bad) 2008-Dec-13 18:55:21 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.048 (still bad) 2008-Dec-13 18:55:23 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.044 (still bad) 2008-Dec-13 18:55:25 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.042 (still bad) 2008-Dec-13 18:55:27 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.054 (still bad) 2008-Dec-13 18:55:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2008-Dec-13 18:55:29 LOG4 check_wapp_levels: WAPP-1 power levels: 0.993 0.949 0.935 1.025 2008-Dec-13 18:55:29 LOG4 check_wapp_levels: WAPP-2 power levels: 1.042 0.968 0.901 0.924 2008-Dec-13 18:55:29 LOG4 check_wapp_levels: WAPP-3 power levels: 0.886 0.927 0.895 1.025 2008-Dec-13 18:55:29 LOG4 check_wapp_levels: WAPP-4 power levels: 1.008 0.104 0.889 0.114 2008-Dec-13 18:55:31 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.041 (still bad) 2008-Dec-13 18:55:33 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.042 (still bad) 2008-Dec-13 18:55:35 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.042 (still bad) 2008-Dec-13 18:55:37 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.042 (still bad) 2008-Dec-13 18:55:39 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.054 (still bad) 2008-Dec-13 18:55:41 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.042 (still bad) 2008-Dec-13 18:55:43 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.040 (still bad) 2008-Dec-13 18:55:45 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.043 (still bad) 2008-Dec-13 18:55:47 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.040 (still bad) 2008-Dec-13 18:55:49 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.041 (still bad) 2008-Dec-13 18:55:51 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.056 (still bad) 2008-Dec-13 18:55:53 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.044 (still bad) 2008-Dec-13 18:55:55 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.042 (still bad) 2008-Dec-13 18:55:57 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.046 (still bad) 2008-Dec-13 18:55:59 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.043 (still bad) 2008-Dec-13 18:56:01 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.042 (still bad) 2008-Dec-13 18:56:03 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.055 (still bad) 2008-Dec-13 18:56:05 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.044 (still bad) 2008-Dec-13 18:56:07 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.042 (still bad) 2008-Dec-13 18:56:09 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.043 (still bad) 2008-Dec-13 18:56:11 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.042 (still bad) 2008-Dec-13 18:56:13 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.042 (still bad) 2008-Dec-13 18:56:15 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.057 (still bad) 2008-Dec-13 18:56:17 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.044 (still bad) 2008-Dec-13 18:56:19 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.043 (still bad) 2008-Dec-13 18:56:21 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.044 (still bad) 2008-Dec-13 18:56:23 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.043 (still bad) 2008-Dec-13 18:56:25 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.044 (still bad) 2008-Dec-13 18:56:27 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.054 (still bad) 2008-Dec-13 18:56:29 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.044 (still bad) 2008-Dec-13 18:56:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2008-Dec-13 18:56:32 LOG4 check_wapp_levels: WAPP-1 power levels: 0.997 0.956 0.934 1.025 2008-Dec-13 18:56:32 LOG4 check_wapp_levels: WAPP-2 power levels: 1.042 0.968 0.897 0.918 2008-Dec-13 18:56:32 LOG4 check_wapp_levels: WAPP-3 power levels: 0.892 0.935 0.900 1.028 2008-Dec-13 18:56:32 LOG4 check_wapp_levels: WAPP-4 power levels: 1.009 0.104 0.889 0.114 2008-Dec-13 18:56:34 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.044 (still bad) 2008-Dec-13 18:56:36 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.041 (still bad) 2008-Dec-13 18:56:38 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.044 (still bad) 2008-Dec-13 18:56:40 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.055 (still bad) 2008-Dec-13 18:56:42 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.042 (still bad) 2008-Dec-13 18:56:44 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.044 (still bad) 2008-Dec-13 18:56:46 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.043 (still bad) 2008-Dec-13 18:56:48 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.044 (still bad) 2008-Dec-13 18:56:50 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.042 (still bad) 2008-Dec-13 18:56:52 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.056 (still bad) 2008-Dec-13 18:56:54 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.043 (still bad) 2008-Dec-13 18:56:56 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.043 (still bad) 2008-Dec-13 18:56:58 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.041 (still bad) 2008-Dec-13 18:57:00 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.042 (still bad) 2008-Dec-13 18:57:02 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.043 (still bad) 2008-Dec-13 18:57:04 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.043 (still bad) 2008-Dec-13 18:57:06 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.042 (still bad) 2008-Dec-13 18:57:08 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.041 (still bad) 2008-Dec-13 18:57:10 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.043 (still bad) 2008-Dec-13 18:57:12 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.044 (still bad) 2008-Dec-13 18:57:14 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.045 (still bad) 2008-Dec-13 18:57:16 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.047 (still bad) 2008-Dec-13 18:57:18 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.047 (still bad) 2008-Dec-13 18:57:20 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.046 (still bad) 2008-Dec-13 18:57:22 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.048 (still bad) 2008-Dec-13 18:57:24 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.046 (still bad) 2008-Dec-13 18:57:26 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.045 (still bad) 2008-Dec-13 18:57:28 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.049 (still bad) 2008-Dec-13 18:57:30 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.045 (still bad) 2008-Dec-13 18:57:32 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.044 (still bad) 2008-Dec-13 18:57:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2008-Dec-13 18:57:34 LOG4 check_wapp_levels: WAPP-1 power levels: 0.996 0.952 0.934 1.022 2008-Dec-13 18:57:34 LOG4 check_wapp_levels: WAPP-2 power levels: 1.045 0.969 0.889 0.918 2008-Dec-13 18:57:34 LOG4 check_wapp_levels: WAPP-3 power levels: 0.883 0.924 0.896 1.026 2008-Dec-13 18:57:34 LOG4 check_wapp_levels: WAPP-4 power levels: 1.007 0.104 0.888 0.114 2008-Dec-13 18:57:36 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.043 (still bad) 2008-Dec-13 18:57:38 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.046 (still bad) 2008-Dec-13 18:57:40 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.049 (still bad) 2008-Dec-13 18:57:42 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.049 (still bad) 2008-Dec-13 18:57:44 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.050 (still bad) 2008-Dec-13 18:57:46 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.053 (still bad) 2008-Dec-13 18:57:48 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.053 (still bad) 2008-Dec-13 18:57:50 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.052 (still bad) 2008-Dec-13 18:57:52 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.051 (still bad) 2008-Dec-13 18:57:54 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.049 (still bad) 2008-Dec-13 18:57:56 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.045 (still bad) 2008-Dec-13 18:57:59 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.045 (still bad) 2008-Dec-13 18:58:01 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.043 (still bad) 2008-Dec-13 18:58:03 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.043 (still bad) 2008-Dec-13 18:58:05 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.045 (still bad) 2008-Dec-13 18:58:07 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.044 (still bad) 2008-Dec-13 18:58:09 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.042 (still bad) 2008-Dec-13 18:58:11 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.042 (still bad) 2008-Dec-13 18:58:13 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.041 (still bad) 2008-Dec-13 18:58:15 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.042 (still bad) 2008-Dec-13 18:58:17 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.043 (still bad) 2008-Dec-13 18:58:19 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.042 (still bad) 2008-Dec-13 18:58:21 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.042 (still bad) 2008-Dec-13 18:58:23 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.045 (still bad) 2008-Dec-13 18:58:25 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.043 (still bad) 2008-Dec-13 18:58:27 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.041 (still bad) 2008-Dec-13 18:58:29 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.044 (still bad) 2008-Dec-13 18:58:31 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.042 (still bad) 2008-Dec-13 18:58:33 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.042 (still bad) 2008-Dec-13 18:58:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2008-Dec-13 18:58:35 LOG4 check_wapp_levels: WAPP-1 power levels: 1.001 0.959 0.939 1.035 2008-Dec-13 18:58:35 LOG4 check_wapp_levels: WAPP-2 power levels: 1.041 0.962 0.890 0.918 2008-Dec-13 18:58:35 LOG4 check_wapp_levels: WAPP-3 power levels: 0.881 0.928 0.897 1.028 2008-Dec-13 18:58:35 LOG4 check_wapp_levels: WAPP-4 power levels: 1.007 0.104 0.888 0.114 2008-Dec-13 18:58:37 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.042 (still bad) 2008-Dec-13 18:58:39 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.049 (still bad) 2008-Dec-13 18:58:41 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.040 (still bad) 2008-Dec-13 18:58:43 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.039 (still bad) 2008-Dec-13 18:58:45 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.043 (still bad) 2008-Dec-13 18:58:47 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.042 (still bad) 2008-Dec-13 18:58:49 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.044 (still bad) 2008-Dec-13 18:58:51 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.050 (still bad) 2008-Dec-13 18:58:53 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.044 (still bad) 2008-Dec-13 18:58:55 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.045 (still bad) 2008-Dec-13 18:58:57 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.049 (still bad) 2008-Dec-13 18:58:59 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.047 (still bad) 2008-Dec-13 18:59:01 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.047 (still bad) 2008-Dec-13 18:59:03 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.057 (still bad) 2008-Dec-13 18:59:05 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.050 (still bad) 2008-Dec-13 18:59:07 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.045 (still bad) 2008-Dec-13 18:59:09 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.045 (still bad) 2008-Dec-13 18:59:11 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.041 (still bad) 2008-Dec-13 18:59:13 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.039 (still bad) 2008-Dec-13 18:59:15 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.046 (still bad) 2008-Dec-13 18:59:17 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.041 (still bad) 2008-Dec-13 18:59:19 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.044 (still bad) 2008-Dec-13 18:59:21 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.053 (still bad) 2008-Dec-13 18:59:23 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.059 (still bad) 2008-Dec-13 18:59:25 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.063 (still bad) 2008-Dec-13 18:59:28 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.070 (still bad) 2008-Dec-13 18:59:30 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.063 (still bad) 2008-Dec-13 18:59:32 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.055 (still bad) 2008-Dec-13 18:59:34 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.051 (still bad) 2008-Dec-13 18:59:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2008-Dec-13 18:59:36 LOG4 check_wapp_levels: WAPP-1 power levels: 0.991 0.949 0.928 1.017 2008-Dec-13 18:59:36 LOG4 check_wapp_levels: WAPP-2 power levels: 1.039 0.960 0.883 0.915 2008-Dec-13 18:59:36 LOG4 check_wapp_levels: WAPP-3 power levels: 0.879 0.921 0.903 1.041 2008-Dec-13 18:59:36 LOG4 check_wapp_levels: WAPP-4 power levels: 1.004 0.104 0.884 0.114 2008-Dec-13 18:59:38 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.038 (still bad) 2008-Dec-13 18:59:40 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.042 (still bad) 2008-Dec-13 18:59:42 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.039 (still bad) 2008-Dec-13 18:59:44 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.040 (still bad) 2008-Dec-13 18:59:46 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.039 (still bad) 2008-Dec-13 18:59:48 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.038 (still bad) 2008-Dec-13 18:59:50 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.037 (still bad) 2008-Dec-13 18:59:52 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.041 (still bad) 2008-Dec-13 18:59:54 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.039 (still bad) 2008-Dec-13 18:59:56 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.038 (still bad) 2008-Dec-13 18:59:58 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.039 (still bad) 2008-Dec-13 19:00:00 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.036 (still bad) 2008-Dec-13 19:00:02 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.038 (still bad) 2008-Dec-13 19:00:04 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.040 (still bad) 2008-Dec-13 19:00:06 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.040 (still bad) 2008-Dec-13 19:00:08 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.038 (still bad) 2008-Dec-13 19:00:10 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.039 (still bad) 2008-Dec-13 19:00:12 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.039 (still bad) 2008-Dec-13 19:00:14 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.038 (still bad) 2008-Dec-13 19:00:16 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.050 (still bad) 2008-Dec-13 19:00:18 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.039 (still bad) 2008-Dec-13 19:00:20 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.038 (still bad) 2008-Dec-13 19:00:22 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.039 (still bad) 2008-Dec-13 19:00:24 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.042 (still bad) 2008-Dec-13 19:00:26 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.040 (still bad) 2008-Dec-13 19:00:28 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.051 (still bad) 2008-Dec-13 19:00:30 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.039 (still bad) 2008-Dec-13 19:00:32 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.040 (still bad) 2008-Dec-13 19:00:34 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.041 (still bad) 2008-Dec-13 19:00:36 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.039 (still bad) 2008-Dec-13 19:00:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2008-Dec-13 19:00:38 LOG4 check_wapp_levels: WAPP-1 power levels: 0.993 0.948 0.932 1.019 2008-Dec-13 19:00:38 LOG4 check_wapp_levels: WAPP-2 power levels: 1.040 0.959 0.887 0.918 2008-Dec-13 19:00:38 LOG4 check_wapp_levels: WAPP-3 power levels: 0.879 0.923 0.892 1.026 2008-Dec-13 19:00:38 LOG4 check_wapp_levels: WAPP-4 power levels: 1.003 0.104 0.885 0.114 2008-Dec-13 19:00:40 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.049 (still bad) 2008-Dec-13 19:00:42 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.039 (still bad) 2008-Dec-13 19:00:44 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.039 (still bad) 2008-Dec-13 19:00:47 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.039 (still bad) 2008-Dec-13 19:00:49 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.039 (still bad) 2008-Dec-13 19:00:51 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.037 (still bad) 2008-Dec-13 19:00:53 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.050 (still bad) 2008-Dec-13 19:00:55 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.041 (still bad) 2008-Dec-13 19:00:57 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.039 (still bad) 2008-Dec-13 19:00:59 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.040 (still bad) 2008-Dec-13 19:01:01 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.039 (still bad) 2008-Dec-13 19:01:03 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.039 (still bad) 2008-Dec-13 19:01:05 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.048 (still bad) 2008-Dec-13 19:01:07 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.040 (still bad) 2008-Dec-13 19:01:09 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.038 (still bad) 2008-Dec-13 19:01:11 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.040 (still bad) 2008-Dec-13 19:01:13 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.039 (still bad) 2008-Dec-13 19:01:15 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.039 (still bad) 2008-Dec-13 19:01:17 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.049 (still bad) 2008-Dec-13 19:01:19 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.036 (still bad) 2008-Dec-13 19:01:21 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.038 (still bad) 2008-Dec-13 19:01:23 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.038 (still bad) 2008-Dec-13 19:01:25 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.038 (still bad) 2008-Dec-13 19:01:27 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.040 (still bad) 2008-Dec-13 19:01:29 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.051 (still bad) 2008-Dec-13 19:01:31 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.038 (still bad) 2008-Dec-13 19:01:33 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.038 (still bad) 2008-Dec-13 19:01:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Dec-13 19:01:34 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Dec-13 19:01:34 LOG5 end_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2008-Dec-13 19:01:34 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Dec-13 19:01:34 LOG5 end_task: Level: (3) ID = <10115> Status = 0 0 0 0 ok 2008-Dec-13 19:01:34 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Dec-13 19:01:34 LOG5 finish_task: Level: (2) ID = <10083> Status = 0 0 0 0 ok 2008-Dec-13 19:01:34 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Dec-13 19:01:34 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Dec-13 19:01:34 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Dec-13 19:01:34 LOG5 end_task: Level: (2) ID = <10083> Status = 0 0 0 0 ok 2008-Dec-13 19:01:34 COMMAND run_command_line: EXECUTING command 26: 'ENDIF' 2008-Dec-13 19:01:34 COMMAND run_command_line: EXECUTING command 29: 'IF LSTSLEW(AGES33PP_p1_099) < 005031 THEN' 2008-Dec-13 19:01:35 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES33PP_p1_099) < 005031 2008-Dec-13 19:01:35 INFO5 is_if_valid: Condition parsed as: 0.21707633333333334 < 0.8419444444444445 2008-Dec-13 19:01:35 COMMAND run_command_line: EXECUTING command 30: 'FIXEDDRIFT az=211.36 alfaangle=-11.7 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p1_099 ra=12400.00 dec=301300.00' 2008-Dec-13 19:01:35 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Dec-13 19:01:35 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Dec-13 19:01:35 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 211.36 -11.7 hcorcal 5 tracking no first 1 AGES33PP_p1_099 12400.00 301300.00 J 8500.0 Heliocentric velocity(optical)' 2008-Dec-13 19:01:35 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Dec-13 19:01:35 LOG5 begin_task: Level: (2) ID = <10117> Status = 0 0 0 0 ok 2008-Dec-13 19:01:35 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES7448_p2_147' 2008-Dec-13 19:01:35 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Dec-13 19:01:36 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES33PP_p1_099} 2008-Dec-13 19:01:36 INFO3 fixed_driftmap: Sending telescope to Az = 211.36 and ZA = 14.20 2008-Dec-13 19:01:36 LOG3 track_source: Calling 'track_source AGES33PP_p1_099 211.36 14.1971422187 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Dec-13 19:01:36 START begin_task: Starting task 'sending tracking commands' 2008-Dec-13 19:01:36 LOG5 begin_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2008-Dec-13 19:01:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES33PP_p1_099} INFO {Slewing to source 'AGES33PP_p1_099' ...} 2008-Dec-13 19:01:36 INFO1 track_source: Starting to track AGES33PP_p1_099 2008-Dec-13 19:01:36 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES33PP_p1_099" 2008-Dec-13 19:01:36 LOG3 vw_send: To DATATAKING: set ra 211.36 2008-Dec-13 19:01:36 LOG3 vw_send: To DATATAKING: set dec 14.1971422187 2008-Dec-13 19:01:36 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Dec-13 19:01:36 LOG3 vw_send: To DATATAKING: pnt tr 211.36 14.1971422187 -CF 2008-Dec-13 19:01:36 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Dec-13 19:01:36 STOP finish_task: Finishing task 'sending tracking commands' 2008-Dec-13 19:01:36 LOG5 finish_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2008-Dec-13 19:01:36 INFO2 finish_task: DONE finished sending: tracking commands 2008-Dec-13 19:01:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-13 19:01:36 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Dec-13 19:01:36 LOG5 end_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2008-Dec-13 19:01:36 START begin_task: Starting task 'rotate ALFA to -11.7 degrees' 2008-Dec-13 19:01:36 LOG5 begin_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2008-Dec-13 19:01:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -11.7 degrees ...} 2008-Dec-13 19:01:36 INFO2 rotate_alfa: ALFA commanded to -11.7 degrees 2008-Dec-13 19:01:36 LOG3 sock_errsend: To ALFAMOTOR: POSITION -11.7 REPLY 2008-Dec-13 19:01:36 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Dec-13 19:01:36 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Dec-13 19:01:36 LOG5 begin_task: Level: (4) ID = <10120> Status = 0 0 0 0 ok 2008-Dec-13 19:01:36 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES33PP_p1_099" 2008-Dec-13 19:01:36 LOG4 got_cormsg: From DATATAKING: set ra 211.36 2008-Dec-13 19:01:36 LOG4 got_cormsg: From DATATAKING: set dec 14.1971422187 2008-Dec-13 19:01:36 LOG4 got_cormsg: From DATATAKING: vw% 211.36 2008-Dec-13 19:01:36 LOG4 got_cormsg: From DATATAKING: vw% 14.1971422187 2008-Dec-13 19:01:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:01:36 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Dec-13 19:01:36 LOG4 got_cormsg: From DATATAKING: pnt tr 211.36 14.1971422187 -CF 2008-Dec-13 19:01:36 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Dec-13 19:01:36 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Dec-13 19:01:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:01:36 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.039 (still bad) 2008-Dec-13 19:01:58 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Dec-13 19:01:58 INFO3 alfa_motor: ALFA rotator in-position -11.70 degrees 2008-Dec-13 19:01:58 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Dec-13 19:01:58 LOG5 end_task: Level: (4) ID = <10120> Status = 0 0 0 0 ok 2008-Dec-13 19:01:58 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Dec-13 19:01:58 STOP finish_task: Finishing task 'rotate ALFA to -11.7 degrees' 2008-Dec-13 19:01:58 LOG5 finish_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2008-Dec-13 19:01:58 INFO2 finish_task: DONE finished configuration: rotating ALFA to -11.7 degrees 2008-Dec-13 19:01:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-13 19:01:58 STOP end_task: Finishing task 'rotate ALFA to -11.7 degrees' with status 'OK' 2008-Dec-13 19:01:58 LOG5 end_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2008-Dec-13 19:01:58 START begin_task: Starting task 'waiting on telescope' 2008-Dec-13 19:01:58 LOG5 begin_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2008-Dec-13 19:01:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Dec-13 19:01:58 LOG3 waittrk: Start waittrk 5 2008-Dec-13 19:01:58 START begin_task: Starting task 'waiting on telescope movement' 2008-Dec-13 19:01:58 LOG5 begin_task: Level: (4) ID = <10122> Status = 0 0 0 0 ok 2008-Dec-13 19:02:03 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Dec-13 19:02:03 LOG5 end_task: Level: (4) ID = <10122> Status = 0 0 0 0 ok 2008-Dec-13 19:02:03 START begin_task: Starting task 'waiting on telescope on source' 2008-Dec-13 19:02:03 LOG5 begin_task: Level: (4) ID = <10123> Status = 0 0 0 0 ok 2008-Dec-13 19:03:11 COMMAND CIMA-send_to_exec: Sending command to abort observation 2008-Dec-13 19:03:11 LOG4 exec_msg: From OBSERVER: abort_task abort 2008-Dec-13 19:03:11 WARNING abort_task: WARNING abort requested! 2008-Dec-13 19:03:11 WARNING abort_task: WARNING Aborting wait for waiting on telescope on source 2008-Dec-13 19:03:11 STOP end_task: Finishing task 'waiting on telescope on source' with status 'ABORT' 2008-Dec-13 19:03:11 LOG5 end_task: Level: (4) ID = <10123> Status = 1 0 0 0 abort 2008-Dec-13 19:03:11 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Dec-13 19:03:11 LOG4 waittrk: Current telescope position: Az = 472.55 ZA = 14.23 2008-Dec-13 19:03:11 STOP finish_task: Finishing task 'waiting on telescope' 2008-Dec-13 19:03:11 LOG5 finish_task: Level: (3) ID = <10121> Status = 1 0 0 0 abort 2008-Dec-13 19:03:11 WARNING finish_task: WARNING aborted waiting: telescope on source 2008-Dec-13 19:03:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Aborted 2008-Dec-13 19:03:11 STOP end_task: Finishing task 'waiting on telescope' with status 'ABORT' 2008-Dec-13 19:03:11 LOG5 end_task: Level: (3) ID = <10121> Status = 1 0 0 0 abort 2008-Dec-13 19:03:11 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Dec-13 19:03:11 LOG5 finish_task: Level: (2) ID = <10117> Status = 1 0 0 0 abort 2008-Dec-13 19:03:11 WARNING finish_task: WARNING aborted pattern: fixed azimuth drift map 2008-Dec-13 19:03:11 LOG4 send_obs_status: To obs_status: <1> ENDTASK Aborted 2008-Dec-13 19:03:11 END end_task: Finishing task 'fixed azimuth drift map' with status 'ABORT' 2008-Dec-13 19:03:11 LOG5 end_task: Level: (2) ID = <10117> Status = 1 0 0 0 abort 2008-Dec-13 19:03:11 ALERT run_command_file: Stopping command file processing at line 30! 2008-Dec-13 19:03:11 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2008-Dec-13 19:03:11 STOP finish_task: Finishing task 'running command file '081213_obs.cmd'' 2008-Dec-13 19:03:11 LOG5 finish_task: Level: (1) ID = <10003> Status = 1 0 0 0 abort 2008-Dec-13 19:03:11 WARNING finish_task: WARNING aborted running: command file '081213_obs.cmd' 2008-Dec-13 19:03:11 LOG4 send_obs_status: To obs_status: <1> ENDTASK Aborted 2008-Dec-13 19:03:11 END end_task: Finishing task 'running command file '081213_obs.cmd'' with status 'ABORT' 2008-Dec-13 19:03:11 LOG5 end_task: Level: (1) ID = <10003> Status = 1 0 0 0 abort 2008-Dec-13 19:03:27 INFO1 CIMA-run_command_file: Transferring command file 'command_galfacurpos.cmd ' to executive ... 2008-Dec-13 19:03:27 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 7 {LOAD togs_ages.conf} 2008-Dec-13 19:03:27 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 8 {TRACKCURPOS} 2008-Dec-13 19:03:27 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 9 {ALFAANGLE 19} 2008-Dec-13 19:03:27 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 13 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2008-Dec-13 19:03:27 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-Dec-13 19:03:27 LOG4 exec_msg: From OBSERVER: run_command_file command_galfacurpos.cmd 1 1 4 2008-Dec-13 19:03:27 LOG4 run_command_file: Calling 'run_command_file command_galfacurpos.cmd 1 1 4' 2008-Dec-13 19:03:27 BEGIN begin_task: Starting task 'running command file 'command_galfacurpos.cmd'' 2008-Dec-13 19:03:27 LOG5 begin_task: Level: (1) ID = <10124> Status = 0 0 0 0 ok 2008-Dec-13 19:03:27 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfacurpos.cmd' ...} 2008-Dec-13 19:03:27 NOTE run_command_file: Starting execution of command file 'command_galfacurpos.cmd' from line 1 2008-Dec-13 19:03:27 COMMAND run_command_line: EXECUTING command 7: 'LOAD togs_ages.conf' 2008-Dec-13 19:03:27 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2008-Dec-13 19:03:27 NOTE CIMA-check_config_file: File 'togs_ages.conf' contains a observing mode set-up which will be ignored! 2008-Dec-13 19:03:27 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Dec-13 19:03:27 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2008-Dec-13 19:03:27 NOTE CIMA-load_config_file: Loading configuration file 'togs_ages.conf' 2008-Dec-13 19:03:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Dec-13 19:03:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Dec-13 19:03:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Dec-13 19:03:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Dec-13 19:03:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Dec-13 19:03:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2008-Dec-13 19:03:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Dec-13 19:03:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1381.2" 2008-Dec-13 19:03:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1381.2" 2008-Dec-13 19:03:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1381.2" 2008-Dec-13 19:03:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1381.2" 2008-Dec-13 19:03:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1381.2" 2008-Dec-13 19:03:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1381.2" 2008-Dec-13 19:03:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1381.2" 2008-Dec-13 19:03:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1381.2" 2008-Dec-13 19:03:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1381.2" 2008-Dec-13 19:03:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Dec-13 19:03:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Dec-13 19:03:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Dec-13 19:03:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Dec-13 19:03:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Dec-13 19:03:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Dec-13 19:03:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Dec-13 19:03:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Dec-13 19:03:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Dec-13 19:03:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Dec-13 19:03:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Dec-13 19:03:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Dec-13 19:03:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Dec-13 19:03:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2008-Dec-13 19:03:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Dec-13 19:03:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Dec-13 19:03:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Dec-13 19:03:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Dec-13 19:03:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Dec-13 19:03:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Dec-13 19:03:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Dec-13 19:03:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Dec-13 19:03:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Dec-13 19:03:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1631.200000" 2008-Dec-13 19:03:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Dec-13 19:03:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Dec-13 19:03:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Dec-13 19:03:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Dec-13 19:03:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Dec-13 19:03:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Dec-13 19:03:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Dec-13 19:03:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Dec-13 19:03:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Dec-13 19:03:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Dec-13 19:03:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Dec-13 19:03:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Dec-13 19:03:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Dec-13 19:03:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Dec-13 19:03:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Dec-13 19:03:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Dec-13 19:03:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Dec-13 19:03:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Dec-13 19:03:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Dec-13 19:03:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Dec-13 19:03:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Dec-13 19:03:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Dec-13 19:03:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Dec-13 19:03:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Dec-13 19:03:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Dec-13 19:03:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Dec-13 19:03:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Dec-13 19:03:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Dec-13 19:03:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Dec-13 19:03:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Dec-13 19:03:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Dec-13 19:03:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Dec-13 19:03:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Dec-13 19:03:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Dec-13 19:03:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Dec-13 19:03:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Dec-13 19:03:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Dec-13 19:03:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Dec-13 19:03:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Dec-13 19:03:29 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Dec-13 19:03:29 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Dec-13 19:03:29 LOG5 begin_task: Level: (2) ID = <10125> Status = 0 0 0 0 ok 2008-Dec-13 19:03:29 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Dec-13 19:03:29 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Dec-13 19:03:29 LOG1 config_iflo: Receiver ALFA already selected 2008-Dec-13 19:03:29 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Dec-13 19:03:29 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Dec-13 19:03:29 START begin_task: Starting task 'waiting on command to ALFA' 2008-Dec-13 19:03:29 LOG5 begin_task: Level: (3) ID = <10126> Status = 0 0 0 0 ok 2008-Dec-13 19:03:29 LOG4 got_alfamon: From ALFAMON: ACK 2008-Dec-13 19:03:29 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Dec-13 19:03:29 LOG5 end_task: Level: (3) ID = <10126> Status = 0 0 0 0 ok 2008-Dec-13 19:03:29 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Dec-13 19:03:29 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Dec-13 19:03:29 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2008-Dec-13 19:03:29 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2008-Dec-13 19:03:29 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Dec-13 19:03:29 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Dec-13 19:03:29 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2008-Dec-13 19:03:29 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2008-Dec-13 19:03:29 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2008-Dec-13 19:03:29 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2008-Dec-13 19:03:29 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2008-Dec-13 19:03:29 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2008-Dec-13 19:03:29 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Dec-13 19:03:29 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Dec-13 19:03:29 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Dec-13 19:03:29 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Dec-13 19:03:29 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Dec-13 19:03:29 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2008-Dec-13 19:03:29 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2008-Dec-13 19:03:29 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2008-Dec-13 19:03:29 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2008-Dec-13 19:03:29 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Dec-13 19:03:29 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2008-Dec-13 19:03:29 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2008-Dec-13 19:03:29 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Dec-13 19:03:29 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-13 19:03:29 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2008-Dec-13 19:03:29 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2008-Dec-13 19:03:29 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Dec-13 19:03:29 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2008-Dec-13 19:03:29 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2008-Dec-13 19:03:29 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Dec-13 19:03:29 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Dec-13 19:03:29 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Dec-13 19:03:29 LOG5 begin_task: Level: (3) ID = <10127> Status = 0 0 0 0 ok 2008-Dec-13 19:03:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2008-Dec-13 19:03:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Dec-13 19:03:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-13 19:03:30 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Dec-13 19:03:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:03:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:03:30 LOG4 got_cormsg: From DATATAKING: vw% DONE 2008-Dec-13 19:03:30 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Dec-13 19:03:30 LOG5 end_task: Level: (3) ID = <10127> Status = 0 0 0 0 ok 2008-Dec-13 19:03:30 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Dec-13 19:03:30 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Dec-13 19:03:30 LOG5 finish_task: Level: (2) ID = <10125> Status = 0 0 0 0 ok 2008-Dec-13 19:03:30 DONE finish_task: DONE finished configuration: IF/LO path 2008-Dec-13 19:03:30 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Dec-13 19:03:31 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Dec-13 19:03:31 LOG5 end_task: Level: (2) ID = <10125> Status = 0 0 0 0 ok 2008-Dec-13 19:03:31 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Dec-13 19:03:31 LOG5 begin_task: Level: (2) ID = <10128> Status = 0 0 0 0 ok 2008-Dec-13 19:03:31 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Dec-13 19:03:31 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Dec-13 19:03:31 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2008-Dec-13 19:03:31 START begin_task: Starting task 'selecting calibration port' 2008-Dec-13 19:03:31 LOG5 begin_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2008-Dec-13 19:03:31 LOG3 vw_send: To DATATAKING: calport 3 2008-Dec-13 19:03:31 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Dec-13 19:03:31 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Dec-13 19:03:31 START begin_task: Starting task 'waiting on calport' 2008-Dec-13 19:03:31 LOG5 begin_task: Level: (4) ID = <10130> Status = 0 0 0 0 ok 2008-Dec-13 19:03:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:03:31 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Dec-13 19:03:31 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Dec-13 19:03:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:03:31 LOG4 got_cormsg: From DATATAKING: DONE 2008-Dec-13 19:03:31 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Dec-13 19:03:31 LOG5 end_task: Level: (4) ID = <10130> Status = 0 0 0 0 ok 2008-Dec-13 19:03:31 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Dec-13 19:03:31 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Dec-13 19:03:31 LOG5 end_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2008-Dec-13 19:03:31 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Dec-13 19:03:31 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Dec-13 19:03:31 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Dec-13 19:03:31 LOG5 begin_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2008-Dec-13 19:03:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:03:31 LOG3 CALCONTROL-caltrig: Software trigger 2008-Dec-13 19:03:31 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Dec-13 19:03:31 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Dec-13 19:03:31 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Dec-13 19:03:31 LOG5 end_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2008-Dec-13 19:03:31 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Dec-13 19:03:31 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Dec-13 19:03:31 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Dec-13 19:03:31 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Dec-13 19:03:31 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Dec-13 19:03:31 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Dec-13 19:03:31 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Dec-13 19:03:31 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Dec-13 19:03:31 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Matthew Smith 2008-Dec-13 19:03:31 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Matthew Smith 2008-Dec-13 19:03:31 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Matthew Smith 2008-Dec-13 19:03:31 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Matthew Smith 2008-Dec-13 19:03:31 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Dec-13 19:03:31 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Dec-13 19:03:31 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Dec-13 19:03:31 LOG5 begin_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2008-Dec-13 19:03:31 LOG3 CALCONTROL-caltrig: Software trigger 2008-Dec-13 19:03:31 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Dec-13 19:03:31 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Dec-13 19:03:31 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Dec-13 19:03:31 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Dec-13 19:03:31 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Dec-13 19:03:31 LOG5 end_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2008-Dec-13 19:03:32 LOG3 sock_errsend: To WAPPDATA: FLUSH 2008-Dec-13 19:03:32 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Dec-13 19:03:32 LOG5 finish_task: Level: (2) ID = <10128> Status = 0 0 0 0 ok 2008-Dec-13 19:03:32 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Dec-13 19:03:32 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Dec-13 19:03:32 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Dec-13 19:03:32 LOG5 end_task: Level: (2) ID = <10128> Status = 0 0 0 0 ok 2008-Dec-13 19:03:32 COMMAND run_command_line: EXECUTING command 8: 'TRACKCURPOS' 2008-Dec-13 19:03:32 BEGIN begin_task: Starting task 'tracking current position' 2008-Dec-13 19:03:32 LOG5 begin_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2008-Dec-13 19:03:32 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Current Position} INFO {Tracking current position ...} 2008-Dec-13 19:03:32 INFO1 track_current_pos: Starting to track the current commanded position RA = 23:14:27.3 and Dec = +25:09:56.0 2008-Dec-13 19:03:32 LOG3 track_source: Calling 'track_source Cur-pos 231427.3 250956.0 J 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2008-Dec-13 19:03:32 START begin_task: Starting task 'sending tracking commands' 2008-Dec-13 19:03:32 LOG5 begin_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2008-Dec-13 19:03:32 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {Cur-pos} INFO {Slewing to source 'Cur-pos' ...} 2008-Dec-13 19:03:32 INFO1 track_source: Starting to track Cur-pos 2008-Dec-13 19:03:32 LOG3 vw_send: To DATATAKING: hdrldsrcnm "Cur-pos" 2008-Dec-13 19:03:32 LOG3 vw_send: To DATATAKING: set ra 231427.3 2008-Dec-13 19:03:32 LOG3 vw_send: To DATATAKING: set dec 250956.0 2008-Dec-13 19:03:32 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Dec-13 19:03:32 LOG3 vw_send: To DATATAKING: pnt tr 231427.3 250956.0 -CJ 2008-Dec-13 19:03:32 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Dec-13 19:03:32 STOP finish_task: Finishing task 'sending tracking commands' 2008-Dec-13 19:03:32 LOG5 finish_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2008-Dec-13 19:03:32 INFO2 finish_task: DONE finished sending: tracking commands 2008-Dec-13 19:03:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-13 19:03:32 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Dec-13 19:03:32 LOG5 end_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2008-Dec-13 19:03:32 START begin_task: Starting task 'waiting on telescope' 2008-Dec-13 19:03:32 LOG5 begin_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2008-Dec-13 19:03:32 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Dec-13 19:03:32 LOG3 waittrk: Start waittrk 5 2008-Dec-13 19:03:32 START begin_task: Starting task 'waiting on telescope movement' 2008-Dec-13 19:03:32 LOG5 begin_task: Level: (4) ID = <10136> Status = 0 0 0 0 ok 2008-Dec-13 19:03:32 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Matthew Smith' 2008-Dec-13 19:03:32 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Dec-13 19:03:32 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "Cur-pos" 2008-Dec-13 19:03:32 LOG4 got_cormsg: From DATATAKING: set ra 231427.3 2008-Dec-13 19:03:32 LOG4 got_cormsg: From DATATAKING: set dec 250956.0 2008-Dec-13 19:03:32 LOG4 got_cormsg: From DATATAKING: vw% 231427.3 2008-Dec-13 19:03:32 LOG4 got_cormsg: From DATATAKING: vw% 250956.0 2008-Dec-13 19:03:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:03:32 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Dec-13 19:03:32 LOG4 got_cormsg: From DATATAKING: pnt tr 231427.3 250956.0 -CJ 2008-Dec-13 19:03:32 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Dec-13 19:03:32 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Dec-13 19:03:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:03:37 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Dec-13 19:03:37 LOG5 end_task: Level: (4) ID = <10136> Status = 0 0 0 0 ok 2008-Dec-13 19:03:37 START begin_task: Starting task 'waiting on telescope on source' 2008-Dec-13 19:03:37 LOG5 begin_task: Level: (4) ID = <10137> Status = 0 0 0 0 ok 2008-Dec-13 19:04:05 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Dec-13 19:04:05 LOG5 end_task: Level: (4) ID = <10137> Status = 0 0 0 0 ok 2008-Dec-13 19:04:05 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Dec-13 19:04:05 INFO2 waittrk: Now tracking Cur-pos 2008-Dec-13 19:04:05 LOG4 waittrk: Current telescope position: Az = 480.79 ZA = 14.32 2008-Dec-13 19:04:05 STOP finish_task: Finishing task 'waiting on telescope' 2008-Dec-13 19:04:05 LOG5 finish_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2008-Dec-13 19:04:05 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Dec-13 19:04:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-13 19:04:05 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Dec-13 19:04:05 LOG5 end_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2008-Dec-13 19:04:05 STOP finish_task: Finishing task 'tracking current position' 2008-Dec-13 19:04:05 LOG5 finish_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2008-Dec-13 19:04:05 DONE finish_task: DONE finished tracking: current position 2008-Dec-13 19:04:05 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Dec-13 19:04:05 END end_task: Finishing task 'tracking current position' with status 'OK' 2008-Dec-13 19:04:05 LOG5 end_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2008-Dec-13 19:04:05 COMMAND run_command_line: EXECUTING command 9: 'ALFAANGLE 19' 2008-Dec-13 19:04:05 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2008-Dec-13 19:04:05 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Dec-13 19:04:05 LOG5 begin_task: Level: (2) ID = <10138> Status = 0 0 0 0 ok 2008-Dec-13 19:04:05 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Dec-13 19:04:05 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Dec-13 19:04:05 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-Dec-13 19:04:05 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Dec-13 19:04:05 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Dec-13 19:04:05 LOG5 begin_task: Level: (3) ID = <10139> Status = 0 0 0 0 ok 2008-Dec-13 19:04:23 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Dec-13 19:04:23 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Dec-13 19:04:23 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Dec-13 19:04:23 LOG5 end_task: Level: (3) ID = <10139> Status = 0 0 0 0 ok 2008-Dec-13 19:04:23 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Dec-13 19:04:23 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Dec-13 19:04:23 LOG5 finish_task: Level: (2) ID = <10138> Status = 0 0 0 0 ok 2008-Dec-13 19:04:23 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Dec-13 19:04:23 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Dec-13 19:04:23 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Dec-13 19:04:23 LOG5 end_task: Level: (2) ID = <10138> Status = 0 0 0 0 ok 2008-Dec-13 19:04:23 COMMAND run_command_line: EXECUTING command 13: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2008-Dec-13 19:04:23 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2008-Dec-13 19:04:23 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Dec-13 19:04:23 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first 0 {1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2008-Dec-13 19:04:24 BEGIN begin_task: Starting task 'smart frequency switching' 2008-Dec-13 19:04:24 LOG5 begin_task: Level: (2) ID = <10140> Status = 0 0 0 0 ok 2008-Dec-13 19:04:24 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'Cur-pos' 2008-Dec-13 19:04:24 INFO1 smartfreq: Starting pattern: Smart frequency switching 2008-Dec-13 19:04:24 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2008-Dec-13 19:04:24 START begin_task: Starting task 'selecting calibration type' 2008-Dec-13 19:04:24 LOG5 begin_task: Level: (3) ID = <10141> Status = 0 0 0 0 ok 2008-Dec-13 19:04:24 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Dec-13 19:04:24 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Dec-13 19:04:24 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Dec-13 19:04:24 START begin_task: Starting task 'waiting on setcal' 2008-Dec-13 19:04:24 LOG5 begin_task: Level: (4) ID = <10142> Status = 0 0 0 0 ok 2008-Dec-13 19:04:24 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Dec-13 19:04:24 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Dec-13 19:04:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:04:24 LOG4 got_cormsg: From DATATAKING: DONE 2008-Dec-13 19:04:24 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Dec-13 19:04:24 LOG5 end_task: Level: (4) ID = <10142> Status = 0 0 0 0 ok 2008-Dec-13 19:04:24 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Dec-13 19:04:24 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Dec-13 19:04:24 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Dec-13 19:04:24 START begin_task: Starting task 'waiting on command to ALFA' 2008-Dec-13 19:04:24 LOG5 begin_task: Level: (4) ID = <10143> Status = 0 0 0 0 ok 2008-Dec-13 19:04:24 LOG4 got_alfamon: From ALFAMON: ACK 2008-Dec-13 19:04:24 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Dec-13 19:04:24 LOG5 end_task: Level: (4) ID = <10143> Status = 0 0 0 0 ok 2008-Dec-13 19:04:24 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Dec-13 19:04:24 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Dec-13 19:04:24 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Dec-13 19:04:24 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Dec-13 19:04:24 START begin_task: Starting task 'waiting on command to ALFA' 2008-Dec-13 19:04:24 LOG5 begin_task: Level: (4) ID = <10144> Status = 0 0 0 0 ok 2008-Dec-13 19:04:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:04:24 LOG4 got_alfamon: From ALFAMON: ACK 2008-Dec-13 19:04:24 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Dec-13 19:04:24 LOG5 end_task: Level: (4) ID = <10144> Status = 0 0 0 0 ok 2008-Dec-13 19:04:24 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Dec-13 19:04:24 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Dec-13 19:04:24 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Dec-13 19:04:24 LOG5 end_task: Level: (3) ID = <10141> Status = 0 0 0 0 ok 2008-Dec-13 19:04:24 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Matthew Smith 2008-Dec-13 19:04:24 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Matthew Smith 2008-Dec-13 19:04:24 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Matthew Smith 2008-Dec-13 19:04:24 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Matthew Smith 2008-Dec-13 19:04:24 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2008-Dec-13 19:04:24 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Dec-13 19:04:24 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2008-Dec-13 19:04:24 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Dec-13 19:04:24 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Dec-13 19:04:24 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Dec-13 19:04:24 LOG5 begin_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2008-Dec-13 19:04:24 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Matthew Smith' 2008-Dec-13 19:04:24 LOG3 CALCONTROL-caltrig: Software trigger 2008-Dec-13 19:04:24 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Dec-13 19:04:24 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Dec-13 19:04:24 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Dec-13 19:04:24 LOG5 end_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2008-Dec-13 19:04:24 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2008-Dec-13 19:04:24 START begin_task: Starting task 'adjusting WAPP power' 2008-Dec-13 19:04:24 LOG5 begin_task: Level: (3) ID = <10146> Status = 0 0 0 0 ok 2008-Dec-13 19:04:24 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Dec-13 19:04:24 INFO2 adjust_power: Starting to adjust WAPP power 2008-Dec-13 19:04:24 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Dec-13 19:04:24 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Dec-13 19:04:25 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Dec-13 19:04:25 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Dec-13 19:04:25 LOG5 begin_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2008-Dec-13 19:04:25 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Dec-13 19:04:25 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Dec-13 19:04:25 NOTE WAPPDATA-new_file: New FITS file: wapp.20081213.a2048.0003.fits 2008-Dec-13 19:04:25 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081213.a2048.0003.fits} 2008-Dec-13 19:04:28 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:04:28 LOG4 got_cormsg: From DATATAKING: DONE 2008-Dec-13 19:04:28 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Dec-13 19:04:28 LOG5 end_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2008-Dec-13 19:04:28 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Dec-13 19:04:28 START begin_task: Starting task 'adjusting WAPP power' 2008-Dec-13 19:04:28 LOG5 begin_task: Level: (4) ID = <10148> Status = 0 0 0 0 ok 2008-Dec-13 19:04:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Dec-13 19:04:28 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Dec-13 19:04:28 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Dec-13 19:04:28 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Dec-13 19:04:28 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Dec-13 19:04:28 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Dec-13 19:04:28 LOG5 begin_task: Level: (5) ID = <10149> Status = 0 0 0 0 ok 2008-Dec-13 19:04:28 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:04:28 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Dec-13 19:04:28 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 7 6 dB 2008-Dec-13 19:04:28 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 1 dB --- beam 5: 5 5 dB 2008-Dec-13 19:04:28 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 3 dB 2008-Dec-13 19:04:28 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 2 0 dB 2008-Dec-13 19:04:28 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Dec-13 19:04:29 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Dec-13 19:04:29 LOG5 end_task: Level: (5) ID = <10149> Status = 0 0 0 0 ok 2008-Dec-13 19:04:29 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.970 0.973 ALFA beam 1: 0.955 1.111 2008-Dec-13 19:04:29 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.026 0.992 ALFA beam 3: 1.089 0.925 2008-Dec-13 19:04:29 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.115 0.944 ALFA beam 5: 1.102 1.004 2008-Dec-13 19:04:29 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.975 0.104 ALFA beam 7: 1.073 0.114 2008-Dec-13 19:04:29 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Dec-13 19:04:29 LOG5 finish_task: Level: (4) ID = <10148> Status = 0 0 0 0 ok 2008-Dec-13 19:04:29 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Dec-13 19:04:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-13 19:04:29 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Dec-13 19:04:29 LOG5 end_task: Level: (4) ID = <10148> Status = 0 0 0 0 ok 2008-Dec-13 19:04:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Dec-13 19:04:29 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Dec-13 19:04:29 LOG5 finish_task: Level: (3) ID = <10146> Status = 0 0 0 0 ok 2008-Dec-13 19:04:29 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Dec-13 19:04:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-13 19:04:29 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Dec-13 19:04:29 LOG5 end_task: Level: (3) ID = <10146> Status = 0 0 0 0 ok 2008-Dec-13 19:04:29 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2008-Dec-13 19:04:29 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2008-Dec-13 19:04:29 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2008-Dec-13 19:04:29 LOG5 antvel: Calling 'antvel 231427.300000 250956.000000 J 0' 2008-Dec-13 19:04:29 LOG2 antvel: Precessing RA = 23:14:27.3 Dec = +25:09:56.0 Epoch = 2008.95495 J 2008-Dec-13 19:04:29 LOG2 antvel: Computed apparent RA = 23:14:54.1 Dec = +25:13:05.4 2008-Dec-13 19:04:29 LOG2 antvel: Parameters to Doppler: Topocentric 83068 2008 348 0.0 2008-Dec-13 19:04:29 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Dec-13 19:04:29 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2008-Dec-13 19:04:29 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2008-Dec-13 19:04:29 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Dec-13 19:04:29 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Dec-13 19:04:29 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Dec-13 19:04:29 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-13 19:04:29 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Dec-13 19:04:29 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Dec-13 19:04:29 LOG5 begin_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2008-Dec-13 19:04:29 LOG5 log_alfabeam: Parameters: 23.240916666666664 25.165555555555553 0.157208 2008.9549480315361 18.999933 2008-Dec-13 19:04:29 LOG4 log_alfabeam: ALFABEAM 0 23.240916666666664 25.165555555555553 2008-Dec-13 19:04:29 LOG4 log_alfabeam: ALFABEAM 1 23.248414804887435 25.135542981563724 2008-Dec-13 19:04:29 LOG4 log_alfabeam: ALFABEAM 2 23.246002445119952 25.227948319388290 2008-Dec-13 19:04:29 LOG4 log_alfabeam: ALFABEAM 3 23.238505773100464 25.258336567260734 2008-Dec-13 19:04:29 LOG4 log_alfabeam: ALFABEAM 4 23.233408262906291 25.195250267017524 2008-Dec-13 19:04:29 LOG4 log_alfabeam: ALFABEAM 5 23.235856722133857 25.102535015524442 2008-Dec-13 19:04:29 LOG4 log_alfabeam: ALFABEAM 6 23.243366400393036 25.073216252068768 2008-Dec-13 19:04:29 INFO2 take_data: Starting WAPP+GALFA scan: 834800040 2008-Dec-13 19:04:29 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Dec-13 19:04:29 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Dec-13 19:04:29 LOG5 begin_task: Level: (4) ID = <10151> Status = 0 0 0 0 ok 2008-Dec-13 19:04:29 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Dec-13 19:04:29 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Dec-13 19:04:29 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-13 19:04:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:04:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:04:29 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83070.00 2008-Dec-13 19:04:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Dec-13 19:04:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:04:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:04:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Dec-13 19:04:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:04:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Dec-13 19:04:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Dec-13 19:04:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1990.000000 MHz 2008-Dec-13 19:04:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 2000.000000 MHz 2008-Dec-13 19:04:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2008-Dec-13 19:04:31 LOG4 check_wapp_levels: WAPP-1 power levels: 1.017 1.009 1.004 1.138 2008-Dec-13 19:04:31 LOG4 check_wapp_levels: WAPP-2 power levels: 1.044 1.024 1.183 0.952 2008-Dec-13 19:04:31 LOG4 check_wapp_levels: WAPP-3 power levels: 1.165 0.966 1.186 1.049 2008-Dec-13 19:04:31 LOG4 check_wapp_levels: WAPP-4 power levels: 0.998 0.105 1.102 0.116 2008-Dec-13 19:04:33 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.186 (still bad) 2008-Dec-13 19:04:35 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.189 (still bad) 2008-Dec-13 19:04:37 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.187 (still bad) 2008-Dec-13 19:04:39 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.187 (still bad) 2008-Dec-13 19:04:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Dec-13 19:04:40 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Dec-13 19:04:40 LOG5 end_task: Level: (4) ID = <10151> Status = 0 0 0 0 ok 2008-Dec-13 19:04:40 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Dec-13 19:04:40 LOG5 end_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2008-Dec-13 19:04:40 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2008-Dec-13 19:04:40 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2008-Dec-13 19:04:40 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2008-Dec-13 19:04:40 LOG5 antvel: Calling 'antvel 231427.300000 250956.000000 J 0' 2008-Dec-13 19:04:40 LOG2 antvel: Precessing RA = 23:14:27.3 Dec = +25:09:56.0 Epoch = 2008.95495 J 2008-Dec-13 19:04:40 LOG2 antvel: Computed apparent RA = 23:14:54.1 Dec = +25:13:05.4 2008-Dec-13 19:04:40 LOG2 antvel: Parameters to Doppler: Topocentric 83080 2008 348 0.0 2008-Dec-13 19:04:40 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Dec-13 19:04:40 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2008-Dec-13 19:04:40 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2008-Dec-13 19:04:40 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Dec-13 19:04:40 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Dec-13 19:04:40 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Dec-13 19:04:40 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-13 19:04:40 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Dec-13 19:04:40 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Dec-13 19:04:40 LOG5 begin_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2008-Dec-13 19:04:40 LOG5 log_alfabeam: Parameters: 23.240916666666664 25.165555555555553 0.160551 2008.9549484117931 18.999933 2008-Dec-13 19:04:40 LOG4 log_alfabeam: ALFABEAM 0 23.240916666666660 25.165555555555546 2008-Dec-13 19:04:40 LOG4 log_alfabeam: ALFABEAM 1 23.248418590610214 25.135717546623212 2008-Dec-13 19:04:40 LOG4 log_alfabeam: ALFABEAM 2 23.245994542430736 25.228067238451050 2008-Dec-13 19:04:40 LOG4 log_alfabeam: ALFABEAM 3 23.238494011904681 25.258279763437663 2008-Dec-13 19:04:40 LOG4 log_alfabeam: ALFABEAM 4 23.233404545553022 25.195076152487527 2008-Dec-13 19:04:40 LOG4 log_alfabeam: ALFABEAM 5 23.235864639503045 25.102418436485042 2008-Dec-13 19:04:40 LOG4 log_alfabeam: ALFABEAM 6 23.243377963765408 25.073272622501126 2008-Dec-13 19:04:40 INFO2 take_data: Starting WAPP+GALFA scan: 834800041 2008-Dec-13 19:04:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Dec-13 19:04:41 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Dec-13 19:04:41 LOG5 begin_task: Level: (4) ID = <10153> Status = 0 0 0 0 ok 2008-Dec-13 19:04:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Dec-13 19:04:41 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Dec-13 19:04:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-13 19:04:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:04:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:04:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83082.00 2008-Dec-13 19:04:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.200 (still bad) 2008-Dec-13 19:04:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Dec-13 19:04:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:04:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:04:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Dec-13 19:04:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:04:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Dec-13 19:04:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Dec-13 19:04:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1990.000000 MHz 2008-Dec-13 19:04:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 2000.000000 MHz 2008-Dec-13 19:04:44 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.116 (still bad) 2008-Dec-13 19:04:46 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.115 (still bad) 2008-Dec-13 19:04:48 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.118 (still bad) 2008-Dec-13 19:04:50 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.117 (still bad) 2008-Dec-13 19:04:52 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.119 (still bad) 2008-Dec-13 19:04:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Dec-13 19:04:52 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Dec-13 19:04:52 LOG5 end_task: Level: (4) ID = <10153> Status = 0 0 0 0 ok 2008-Dec-13 19:04:52 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Dec-13 19:04:52 LOG5 end_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2008-Dec-13 19:04:52 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2008-Dec-13 19:04:52 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2008-Dec-13 19:04:52 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2008-Dec-13 19:04:52 LOG5 antvel: Calling 'antvel 231427.300000 250956.000000 J 0' 2008-Dec-13 19:04:52 LOG2 antvel: Precessing RA = 23:14:27.3 Dec = +25:09:56.0 Epoch = 2008.95495 J 2008-Dec-13 19:04:52 LOG2 antvel: Computed apparent RA = 23:14:54.1 Dec = +25:13:05.4 2008-Dec-13 19:04:52 LOG2 antvel: Parameters to Doppler: Topocentric 83092 2008 348 0.0 2008-Dec-13 19:04:52 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Dec-13 19:04:52 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2008-Dec-13 19:04:52 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2008-Dec-13 19:04:52 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Dec-13 19:04:52 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Dec-13 19:04:52 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Dec-13 19:04:52 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-13 19:04:52 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Dec-13 19:04:52 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Dec-13 19:04:52 LOG5 begin_task: Level: (3) ID = <10154> Status = 0 0 0 0 ok 2008-Dec-13 19:04:52 LOG5 log_alfabeam: Parameters: 23.240916666666664 25.165555555555553 0.163893 2008.9549487920501 18.999933 2008-Dec-13 19:04:52 LOG4 log_alfabeam: ALFABEAM 0 23.240916666666664 25.165555555555557 2008-Dec-13 19:04:52 LOG4 log_alfabeam: ALFABEAM 1 23.248422334154760 25.135891261777179 2008-Dec-13 19:04:52 LOG4 log_alfabeam: ALFABEAM 2 23.245986667171536 25.228185336379788 2008-Dec-13 19:04:52 LOG4 log_alfabeam: ALFABEAM 3 23.238482321050725 25.258222991966463 2008-Dec-13 19:04:52 LOG4 log_alfabeam: ALFABEAM 4 23.233400869907143 25.194902887710757 2008-Dec-13 19:04:52 LOG4 log_alfabeam: ALFABEAM 5 23.235872528786178 25.102302665558284 2008-Dec-13 19:04:52 LOG4 log_alfabeam: ALFABEAM 6 23.243389458067195 25.073328954983729 2008-Dec-13 19:04:52 INFO2 take_data: Starting WAPP+GALFA scan: 834800042 2008-Dec-13 19:04:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Dec-13 19:04:53 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Dec-13 19:04:53 LOG5 begin_task: Level: (4) ID = <10155> Status = 0 0 0 0 ok 2008-Dec-13 19:04:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Dec-13 19:04:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Dec-13 19:04:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-13 19:04:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:04:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:04:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83094.00 2008-Dec-13 19:04:54 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.130 (still bad) 2008-Dec-13 19:04:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Dec-13 19:04:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:04:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:04:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Dec-13 19:04:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:04:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Dec-13 19:04:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Dec-13 19:04:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1990.000000 MHz 2008-Dec-13 19:04:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 2000.000000 MHz 2008-Dec-13 19:04:56 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.118 (still bad) 2008-Dec-13 19:04:58 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.118 (still bad) 2008-Dec-13 19:05:00 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.121 (still bad) 2008-Dec-13 19:05:02 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.117 (still bad) 2008-Dec-13 19:05:04 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Dec-13 19:05:04 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.118 (still bad) 2008-Dec-13 19:05:04 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Dec-13 19:05:04 LOG5 end_task: Level: (4) ID = <10155> Status = 0 0 0 0 ok 2008-Dec-13 19:05:04 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Dec-13 19:05:04 LOG5 end_task: Level: (3) ID = <10154> Status = 0 0 0 0 ok 2008-Dec-13 19:05:04 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2008-Dec-13 19:05:04 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2008-Dec-13 19:05:04 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2008-Dec-13 19:05:04 LOG5 antvel: Calling 'antvel 231427.300000 250956.000000 J 0' 2008-Dec-13 19:05:04 LOG2 antvel: Precessing RA = 23:14:27.3 Dec = +25:09:56.0 Epoch = 2008.95495 J 2008-Dec-13 19:05:04 LOG2 antvel: Computed apparent RA = 23:14:54.1 Dec = +25:13:05.4 2008-Dec-13 19:05:04 LOG2 antvel: Parameters to Doppler: Topocentric 83104 2008 348 0.0 2008-Dec-13 19:05:04 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Dec-13 19:05:04 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2008-Dec-13 19:05:04 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2008-Dec-13 19:05:04 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Dec-13 19:05:04 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Dec-13 19:05:04 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Dec-13 19:05:04 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-13 19:05:04 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Dec-13 19:05:04 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Dec-13 19:05:04 LOG5 begin_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2008-Dec-13 19:05:04 LOG5 log_alfabeam: Parameters: 23.240916666666664 25.165555555555553 0.167236 2008.9549491723071 18.999933 2008-Dec-13 19:05:04 LOG4 log_alfabeam: ALFABEAM 0 23.240916666666667 25.165555555555557 2008-Dec-13 19:05:04 LOG4 log_alfabeam: ALFABEAM 1 23.248426038228800 25.136064235943444 2008-Dec-13 19:05:04 LOG4 log_alfabeam: ALFABEAM 2 23.245978814572553 25.228302690889670 2008-Dec-13 19:05:04 LOG4 log_alfabeam: ALFABEAM 3 23.238470693010523 25.258166220968118 2008-Dec-13 19:05:04 LOG4 log_alfabeam: ALFABEAM 4 23.233397233305038 25.194730364013001 2008-Dec-13 19:05:04 LOG4 log_alfabeam: ALFABEAM 5 23.235880394771286 25.102187626487812 2008-Dec-13 19:05:04 LOG4 log_alfabeam: ALFABEAM 6 23.243400890700453 25.073385281252254 2008-Dec-13 19:05:04 INFO2 take_data: Starting WAPP+GALFA scan: 834800043 2008-Dec-13 19:05:05 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Dec-13 19:05:05 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Dec-13 19:05:05 LOG5 begin_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2008-Dec-13 19:05:05 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Dec-13 19:05:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Dec-13 19:05:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-13 19:05:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:05:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:05:05 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83106.00 2008-Dec-13 19:05:06 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.132 (still bad) 2008-Dec-13 19:05:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Dec-13 19:05:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:05:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:05:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Dec-13 19:05:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:05:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Dec-13 19:05:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Dec-13 19:05:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1990.000000 MHz 2008-Dec-13 19:05:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 2000.000000 MHz 2008-Dec-13 19:05:08 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.115 (still bad) 2008-Dec-13 19:05:10 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.115 (still bad) 2008-Dec-13 19:05:12 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.119 (still bad) 2008-Dec-13 19:05:14 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.116 (still bad) 2008-Dec-13 19:05:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Dec-13 19:05:16 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Dec-13 19:05:16 LOG5 end_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2008-Dec-13 19:05:16 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Dec-13 19:05:16 LOG5 end_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2008-Dec-13 19:05:16 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2008-Dec-13 19:05:16 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2008-Dec-13 19:05:16 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2008-Dec-13 19:05:16 LOG5 antvel: Calling 'antvel 231427.300000 250956.000000 J 0' 2008-Dec-13 19:05:16 LOG2 antvel: Precessing RA = 23:14:27.3 Dec = +25:09:56.0 Epoch = 2008.95495 J 2008-Dec-13 19:05:16 LOG2 antvel: Computed apparent RA = 23:14:54.1 Dec = +25:13:05.4 2008-Dec-13 19:05:16 LOG2 antvel: Parameters to Doppler: Topocentric 83116 2008 348 0.0 2008-Dec-13 19:05:16 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Dec-13 19:05:16 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2008-Dec-13 19:05:16 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2008-Dec-13 19:05:16 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Dec-13 19:05:16 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Dec-13 19:05:16 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Dec-13 19:05:16 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-13 19:05:16 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Dec-13 19:05:16 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Dec-13 19:05:16 LOG5 begin_task: Level: (3) ID = <10158> Status = 0 0 0 0 ok 2008-Dec-13 19:05:16 LOG5 log_alfabeam: Parameters: 23.240916666666664 25.165555555555553 0.170578 2008.9549495525641 18.999933 2008-Dec-13 19:05:16 LOG4 log_alfabeam: ALFABEAM 0 23.240916666666667 25.165555555555567 2008-Dec-13 19:05:16 LOG4 log_alfabeam: ALFABEAM 1 23.248429701077661 25.136236370569716 2008-Dec-13 19:05:16 LOG4 log_alfabeam: ALFABEAM 2 23.245970989273417 25.228419238737043 2008-Dec-13 19:05:16 LOG4 log_alfabeam: ALFABEAM 3 23.238459134213841 25.258109486453844 2008-Dec-13 19:05:16 LOG4 log_alfabeam: ALFABEAM 4 23.233393637464541 25.194558679651958 2008-Dec-13 19:05:16 LOG4 log_alfabeam: ALFABEAM 5 23.235888232820379 25.102073381198402 2008-Dec-13 19:05:16 LOG4 log_alfabeam: ALFABEAM 6 23.243412255344001 25.073441565679065 2008-Dec-13 19:05:16 INFO2 take_data: Starting WAPP+GALFA scan: 834800044 2008-Dec-13 19:05:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Dec-13 19:05:17 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Dec-13 19:05:17 LOG5 begin_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2008-Dec-13 19:05:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Dec-13 19:05:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Dec-13 19:05:17 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.120 (still bad) 2008-Dec-13 19:05:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-13 19:05:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:05:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:05:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83118.00 2008-Dec-13 19:05:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Dec-13 19:05:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:05:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:05:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Dec-13 19:05:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:05:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Dec-13 19:05:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Dec-13 19:05:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1990.000000 MHz 2008-Dec-13 19:05:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 2000.000000 MHz 2008-Dec-13 19:05:19 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.130 (still bad) 2008-Dec-13 19:05:21 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.117 (still bad) 2008-Dec-13 19:05:23 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.120 (still bad) 2008-Dec-13 19:05:25 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.120 (still bad) 2008-Dec-13 19:05:27 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.120 (still bad) 2008-Dec-13 19:05:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Dec-13 19:05:28 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Dec-13 19:05:28 LOG5 end_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2008-Dec-13 19:05:28 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Dec-13 19:05:28 LOG5 end_task: Level: (3) ID = <10158> Status = 0 0 0 0 ok 2008-Dec-13 19:05:28 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2008-Dec-13 19:05:28 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2008-Dec-13 19:05:28 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2008-Dec-13 19:05:28 LOG5 antvel: Calling 'antvel 231427.300000 250956.000000 J 0' 2008-Dec-13 19:05:28 LOG2 antvel: Precessing RA = 23:14:27.3 Dec = +25:09:56.0 Epoch = 2008.95495 J 2008-Dec-13 19:05:28 LOG2 antvel: Computed apparent RA = 23:14:54.1 Dec = +25:13:05.4 2008-Dec-13 19:05:28 LOG2 antvel: Parameters to Doppler: Topocentric 83128 2008 348 0.0 2008-Dec-13 19:05:28 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Dec-13 19:05:28 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2008-Dec-13 19:05:28 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2008-Dec-13 19:05:28 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Dec-13 19:05:28 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Dec-13 19:05:28 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Dec-13 19:05:28 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-13 19:05:28 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Dec-13 19:05:28 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Dec-13 19:05:28 LOG5 begin_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2008-Dec-13 19:05:28 LOG5 log_alfabeam: Parameters: 23.240916666666664 25.165555555555553 0.173921 2008.9549499328214 18.999933 2008-Dec-13 19:05:28 LOG4 log_alfabeam: ALFABEAM 0 23.240916666666667 25.165555555555557 2008-Dec-13 19:05:28 LOG4 log_alfabeam: ALFABEAM 1 23.248433325348962 25.136407773577840 2008-Dec-13 19:05:28 LOG4 log_alfabeam: ALFABEAM 2 23.245963186531515 25.228535056566262 2008-Dec-13 19:05:28 LOG4 log_alfabeam: ALFABEAM 3 23.238447637220915 25.258052756472296 2008-Dec-13 19:05:28 LOG4 log_alfabeam: ALFABEAM 4 23.233390079781611 25.194387726950524 2008-Dec-13 19:05:28 LOG4 log_alfabeam: ALFABEAM 5 23.235896047693284 25.101959854489959 2008-Dec-13 19:05:28 LOG4 log_alfabeam: ALFABEAM 6 23.243423559313118 25.073497840061638 2008-Dec-13 19:05:28 INFO2 take_data: Starting WAPP+GALFA scan: 834800045 2008-Dec-13 19:05:29 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Dec-13 19:05:29 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Dec-13 19:05:29 LOG5 begin_task: Level: (4) ID = <10161> Status = 0 0 0 0 ok 2008-Dec-13 19:05:29 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Dec-13 19:05:29 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Dec-13 19:05:29 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-13 19:05:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:05:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:05:29 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.130 (still bad) 2008-Dec-13 19:05:29 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83130.00 2008-Dec-13 19:05:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Dec-13 19:05:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:05:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:05:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Dec-13 19:05:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:05:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Dec-13 19:05:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Dec-13 19:05:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1990.000000 MHz 2008-Dec-13 19:05:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 2000.000000 MHz 2008-Dec-13 19:05:31 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.129 (still bad) 2008-Dec-13 19:05:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2008-Dec-13 19:05:33 LOG4 check_wapp_levels: WAPP-1 power levels: 0.971 0.980 0.959 1.118 2008-Dec-13 19:05:33 LOG4 check_wapp_levels: WAPP-2 power levels: 1.032 0.994 1.109 0.928 2008-Dec-13 19:05:33 LOG4 check_wapp_levels: WAPP-3 power levels: 1.126 0.952 1.108 1.004 2008-Dec-13 19:05:33 LOG4 check_wapp_levels: WAPP-4 power levels: 0.975 0.104 1.075 0.115 2008-Dec-13 19:05:35 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.128 (still bad) 2008-Dec-13 19:05:37 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.127 (still bad) 2008-Dec-13 19:05:39 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.130 (still bad) 2008-Dec-13 19:05:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Dec-13 19:05:40 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Dec-13 19:05:40 LOG5 end_task: Level: (4) ID = <10161> Status = 0 0 0 0 ok 2008-Dec-13 19:05:40 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Dec-13 19:05:40 LOG5 end_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2008-Dec-13 19:05:40 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2008-Dec-13 19:05:40 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2008-Dec-13 19:05:40 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2008-Dec-13 19:05:40 LOG5 antvel: Calling 'antvel 231427.300000 250956.000000 J 0' 2008-Dec-13 19:05:40 LOG2 antvel: Precessing RA = 23:14:27.3 Dec = +25:09:56.0 Epoch = 2008.95495 J 2008-Dec-13 19:05:40 LOG2 antvel: Computed apparent RA = 23:14:54.1 Dec = +25:13:05.4 2008-Dec-13 19:05:40 LOG2 antvel: Parameters to Doppler: Topocentric 83140 2008 348 0.0 2008-Dec-13 19:05:40 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Dec-13 19:05:40 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2008-Dec-13 19:05:40 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2008-Dec-13 19:05:40 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Dec-13 19:05:40 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Dec-13 19:05:40 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Dec-13 19:05:40 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-13 19:05:40 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Dec-13 19:05:40 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Dec-13 19:05:40 LOG5 begin_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2008-Dec-13 19:05:40 LOG5 log_alfabeam: Parameters: 23.240916666666664 25.165555555555553 0.177263 2008.9549503130784 18.999933 2008-Dec-13 19:05:40 LOG4 log_alfabeam: ALFABEAM 0 23.240916666666660 25.165555555555539 2008-Dec-13 19:05:40 LOG4 log_alfabeam: ALFABEAM 1 23.248436909324091 25.136578347305051 2008-Dec-13 19:05:40 LOG4 log_alfabeam: ALFABEAM 2 23.245955410954014 25.228650081911304 2008-Dec-13 19:05:40 LOG4 log_alfabeam: ALFABEAM 3 23.238436208392265 25.257996066917404 2008-Dec-13 19:05:40 LOG4 log_alfabeam: ALFABEAM 4 23.233386561938449 25.194217603277966 2008-Dec-13 19:05:40 LOG4 log_alfabeam: ALFABEAM 5 23.235903834784956 25.101847107524097 2008-Dec-13 19:05:40 LOG4 log_alfabeam: ALFABEAM 6 23.243434796354489 25.073554068892118 2008-Dec-13 19:05:40 INFO2 take_data: Starting WAPP+GALFA scan: 834800046 2008-Dec-13 19:05:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Dec-13 19:05:41 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Dec-13 19:05:41 LOG5 begin_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2008-Dec-13 19:05:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Dec-13 19:05:41 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Dec-13 19:05:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-13 19:05:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:05:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:05:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83142.00 2008-Dec-13 19:05:41 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.136 (still bad) 2008-Dec-13 19:05:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Dec-13 19:05:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:05:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:05:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Dec-13 19:05:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:05:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Dec-13 19:05:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Dec-13 19:05:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1990.000000 MHz 2008-Dec-13 19:05:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 2000.000000 MHz 2008-Dec-13 19:05:43 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.133 (still bad) 2008-Dec-13 19:05:45 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.134 (still bad) 2008-Dec-13 19:05:47 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.136 (still bad) 2008-Dec-13 19:05:49 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.134 (still bad) 2008-Dec-13 19:05:51 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.136 (still bad) 2008-Dec-13 19:05:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Dec-13 19:05:52 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Dec-13 19:05:52 LOG5 end_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2008-Dec-13 19:05:52 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Dec-13 19:05:52 LOG5 end_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2008-Dec-13 19:05:52 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2008-Dec-13 19:05:52 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Dec-13 19:05:52 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Dec-13 19:05:52 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Dec-13 19:05:52 LOG5 begin_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2008-Dec-13 19:05:52 LOG3 CALCONTROL-caltrig: Software trigger 2008-Dec-13 19:05:52 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Dec-13 19:05:52 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Dec-13 19:05:52 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Dec-13 19:05:52 LOG5 end_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2008-Dec-13 19:05:52 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2008-Dec-13 19:05:52 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2008-Dec-13 19:05:52 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2008-Dec-13 19:05:52 LOG5 antvel: Calling 'antvel 231427.300000 250956.000000 J 0' 2008-Dec-13 19:05:52 LOG2 antvel: Precessing RA = 23:14:27.3 Dec = +25:09:56.0 Epoch = 2008.95495 J 2008-Dec-13 19:05:52 LOG2 antvel: Computed apparent RA = 23:14:54.1 Dec = +25:13:05.4 2008-Dec-13 19:05:52 LOG2 antvel: Parameters to Doppler: Topocentric 83152 2008 348 0.0 2008-Dec-13 19:05:52 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Dec-13 19:05:52 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2008-Dec-13 19:05:52 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2008-Dec-13 19:05:52 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Dec-13 19:05:52 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Dec-13 19:05:52 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Dec-13 19:05:52 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-13 19:05:52 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Dec-13 19:05:52 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Dec-13 19:05:52 LOG5 begin_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2008-Dec-13 19:05:52 LOG5 log_alfabeam: Parameters: 23.240916666666664 25.165555555555553 0.180606 2008.9549506933354 18.999933 2008-Dec-13 19:05:52 LOG4 log_alfabeam: ALFABEAM 0 23.240916666666660 25.165555555555557 2008-Dec-13 19:05:52 LOG4 log_alfabeam: ALFABEAM 1 23.248440455591972 25.136748198688377 2008-Dec-13 19:05:52 LOG4 log_alfabeam: ALFABEAM 2 23.245947657825482 25.228764390365118 2008-Dec-13 19:05:52 LOG4 log_alfabeam: ALFABEAM 3 23.238424840375039 25.257939385773813 2008-Dec-13 19:05:52 LOG4 log_alfabeam: ALFABEAM 4 23.233383081389189 25.194048201943094 2008-Dec-13 19:05:52 LOG4 log_alfabeam: ALFABEAM 5 23.235911598826998 25.101735066137728 2008-Dec-13 19:05:52 LOG4 log_alfabeam: ALFABEAM 6 23.243445973698034 25.073610284021932 2008-Dec-13 19:05:52 INFO2 take_data: Starting WAPP+GALFA scan: 834800047 2008-Dec-13 19:05:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Dec-13 19:05:53 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Dec-13 19:05:53 LOG5 begin_task: Level: (4) ID = <10166> Status = 0 0 0 0 ok 2008-Dec-13 19:05:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Dec-13 19:05:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Dec-13 19:05:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-13 19:05:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:05:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:05:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83154.00 2008-Dec-13 19:05:54 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.143 (still bad) 2008-Dec-13 19:05:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Dec-13 19:05:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:05:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:05:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Dec-13 19:05:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:05:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Dec-13 19:05:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Dec-13 19:05:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1990.000000 MHz 2008-Dec-13 19:05:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 2000.000000 MHz 2008-Dec-13 19:05:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.653 (still bad) 2008-Dec-13 19:05:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.658 (still bad) 2008-Dec-13 19:06:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.655 (still bad) 2008-Dec-13 19:06:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.657 (still bad) 2008-Dec-13 19:06:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.671 (still bad) 2008-Dec-13 19:06:04 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Dec-13 19:06:04 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Dec-13 19:06:04 LOG5 end_task: Level: (4) ID = <10166> Status = 0 0 0 0 ok 2008-Dec-13 19:06:04 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Dec-13 19:06:04 LOG5 end_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2008-Dec-13 19:06:04 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2008-Dec-13 19:06:04 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2008-Dec-13 19:06:04 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2008-Dec-13 19:06:04 LOG5 antvel: Calling 'antvel 231427.300000 250956.000000 J 0' 2008-Dec-13 19:06:04 LOG2 antvel: Precessing RA = 23:14:27.3 Dec = +25:09:56.0 Epoch = 2008.95495 J 2008-Dec-13 19:06:04 LOG2 antvel: Computed apparent RA = 23:14:54.1 Dec = +25:13:05.4 2008-Dec-13 19:06:04 LOG2 antvel: Parameters to Doppler: Topocentric 83164 2008 348 0.0 2008-Dec-13 19:06:04 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Dec-13 19:06:04 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2008-Dec-13 19:06:04 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2008-Dec-13 19:06:04 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Dec-13 19:06:04 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Dec-13 19:06:04 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Dec-13 19:06:04 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-13 19:06:04 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Dec-13 19:06:04 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Dec-13 19:06:04 LOG5 begin_task: Level: (3) ID = <10167> Status = 0 0 0 0 ok 2008-Dec-13 19:06:04 LOG5 log_alfabeam: Parameters: 23.240916666666664 25.165555555555553 0.183948 2008.9549510735924 18.999933 2008-Dec-13 19:06:04 LOG4 log_alfabeam: ALFABEAM 0 23.240916666666664 25.165555555555571 2008-Dec-13 19:06:04 LOG4 log_alfabeam: ALFABEAM 1 23.248443962469288 25.136917230942352 2008-Dec-13 19:06:04 LOG4 log_alfabeam: ALFABEAM 2 23.245939931720969 25.228877920225806 2008-Dec-13 19:06:04 LOG4 log_alfabeam: ALFABEAM 3 23.238413539461654 25.257882748817085 2008-Dec-13 19:06:04 LOG4 log_alfabeam: ALFABEAM 4 23.233379639781202 25.193879619439102 2008-Dec-13 19:06:04 LOG4 log_alfabeam: ALFABEAM 5 23.235919335246972 25.101623790742575 2008-Dec-13 19:06:04 LOG4 log_alfabeam: ALFABEAM 6 23.243457085157193 25.073666450064003 2008-Dec-13 19:06:04 INFO2 take_data: Starting WAPP+GALFA scan: 834800048 2008-Dec-13 19:06:05 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Dec-13 19:06:05 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Dec-13 19:06:05 LOG5 begin_task: Level: (4) ID = <10168> Status = 0 0 0 0 ok 2008-Dec-13 19:06:05 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Dec-13 19:06:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Dec-13 19:06:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-13 19:06:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:06:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:06:05 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83166.00 2008-Dec-13 19:06:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.671 (still bad) 2008-Dec-13 19:06:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Dec-13 19:06:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:06:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:06:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Dec-13 19:06:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:06:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Dec-13 19:06:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Dec-13 19:06:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1990.000000 MHz 2008-Dec-13 19:06:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 2000.000000 MHz 2008-Dec-13 19:06:08 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.562 (still bad) 2008-Dec-13 19:06:10 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.564 (still bad) 2008-Dec-13 19:06:12 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.562 (still bad) 2008-Dec-13 19:06:14 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.562 (still bad) 2008-Dec-13 19:06:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Dec-13 19:06:16 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Dec-13 19:06:16 LOG5 end_task: Level: (4) ID = <10168> Status = 0 0 0 0 ok 2008-Dec-13 19:06:16 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Dec-13 19:06:16 LOG5 end_task: Level: (3) ID = <10167> Status = 0 0 0 0 ok 2008-Dec-13 19:06:16 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2008-Dec-13 19:06:16 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2008-Dec-13 19:06:16 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2008-Dec-13 19:06:16 LOG5 antvel: Calling 'antvel 231427.300000 250956.000000 J 0' 2008-Dec-13 19:06:16 LOG2 antvel: Precessing RA = 23:14:27.3 Dec = +25:09:56.0 Epoch = 2008.95495 J 2008-Dec-13 19:06:16 LOG2 antvel: Computed apparent RA = 23:14:54.1 Dec = +25:13:05.4 2008-Dec-13 19:06:16 LOG2 antvel: Parameters to Doppler: Topocentric 83176 2008 348 0.0 2008-Dec-13 19:06:16 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Dec-13 19:06:16 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2008-Dec-13 19:06:16 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2008-Dec-13 19:06:16 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Dec-13 19:06:16 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Dec-13 19:06:16 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Dec-13 19:06:16 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-13 19:06:16 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Dec-13 19:06:16 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Dec-13 19:06:16 LOG5 begin_task: Level: (3) ID = <10169> Status = 0 0 0 0 ok 2008-Dec-13 19:06:16 LOG5 log_alfabeam: Parameters: 23.240916666666664 25.165555555555553 0.187291 2008.9549514538496 18.999933 2008-Dec-13 19:06:16 LOG4 log_alfabeam: ALFABEAM 0 23.240916666666667 25.165555555555546 2008-Dec-13 19:06:16 LOG4 log_alfabeam: ALFABEAM 1 23.248447432487623 25.137085550030232 2008-Dec-13 19:06:16 LOG4 log_alfabeam: ALFABEAM 2 23.245932227952270 25.228990746053892 2008-Dec-13 19:06:16 LOG4 log_alfabeam: ALFABEAM 3 23.238402298384766 25.257826123975843 2008-Dec-13 19:06:16 LOG4 log_alfabeam: ALFABEAM 4 23.233376234625368 25.193711750049406 2008-Dec-13 19:06:16 LOG4 log_alfabeam: ALFABEAM 5 23.235927048748287 25.101513208193595 2008-Dec-13 19:06:16 LOG4 log_alfabeam: ALFABEAM 6 23.243468137877858 25.073722598915968 2008-Dec-13 19:06:16 INFO2 take_data: Starting WAPP+GALFA scan: 834800049 2008-Dec-13 19:06:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Dec-13 19:06:17 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Dec-13 19:06:17 LOG5 begin_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2008-Dec-13 19:06:17 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.570 (still bad) 2008-Dec-13 19:06:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Dec-13 19:06:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Dec-13 19:06:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-13 19:06:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:06:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:06:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83178.00 2008-Dec-13 19:06:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Dec-13 19:06:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:06:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:06:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Dec-13 19:06:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:06:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Dec-13 19:06:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Dec-13 19:06:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1990.000000 MHz 2008-Dec-13 19:06:19 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.570 (still bad) 2008-Dec-13 19:06:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 2000.000000 MHz 2008-Dec-13 19:06:21 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.560 (still bad) 2008-Dec-13 19:06:23 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.563 (still bad) 2008-Dec-13 19:06:25 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.558 (still bad) 2008-Dec-13 19:06:27 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.561 (still bad) 2008-Dec-13 19:06:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Dec-13 19:06:28 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Dec-13 19:06:28 LOG5 end_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2008-Dec-13 19:06:28 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Dec-13 19:06:28 LOG5 end_task: Level: (3) ID = <10169> Status = 0 0 0 0 ok 2008-Dec-13 19:06:28 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2008-Dec-13 19:06:28 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2008-Dec-13 19:06:28 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2008-Dec-13 19:06:28 LOG5 antvel: Calling 'antvel 231427.300000 250956.000000 J 0' 2008-Dec-13 19:06:28 LOG2 antvel: Precessing RA = 23:14:27.3 Dec = +25:09:56.0 Epoch = 2008.95495 J 2008-Dec-13 19:06:28 LOG2 antvel: Computed apparent RA = 23:14:54.1 Dec = +25:13:05.4 2008-Dec-13 19:06:28 LOG2 antvel: Parameters to Doppler: Topocentric 83188 2008 348 0.0 2008-Dec-13 19:06:28 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Dec-13 19:06:28 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2008-Dec-13 19:06:28 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2008-Dec-13 19:06:28 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Dec-13 19:06:28 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Dec-13 19:06:28 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Dec-13 19:06:28 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-13 19:06:28 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Dec-13 19:06:28 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Dec-13 19:06:28 LOG5 begin_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2008-Dec-13 19:06:28 LOG5 log_alfabeam: Parameters: 23.240916666666664 25.165555555555553 0.190633 2008.9549518341066 18.999933 2008-Dec-13 19:06:28 LOG4 log_alfabeam: ALFABEAM 0 23.240916666666664 25.165555555555553 2008-Dec-13 19:06:28 LOG4 log_alfabeam: ALFABEAM 1 23.248450863998208 25.137253060031806 2008-Dec-13 19:06:28 LOG4 log_alfabeam: ALFABEAM 2 23.245924551062590 25.229102806898592 2008-Dec-13 19:06:28 LOG4 log_alfabeam: ALFABEAM 3 23.238391123369759 25.257769546906214 2008-Dec-13 19:06:28 LOG4 log_alfabeam: ALFABEAM 4 23.233372867534971 25.193544689403311 2008-Dec-13 19:06:28 LOG4 log_alfabeam: ALFABEAM 5 23.235934734790757 25.101403378165628 2008-Dec-13 19:06:28 LOG4 log_alfabeam: ALFABEAM 6 23.243479125739210 25.073778695312566 2008-Dec-13 19:06:28 INFO2 take_data: Starting WAPP+GALFA scan: 834800050 2008-Dec-13 19:06:29 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Dec-13 19:06:29 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Dec-13 19:06:29 LOG5 begin_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2008-Dec-13 19:06:29 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Dec-13 19:06:29 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Dec-13 19:06:29 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-13 19:06:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:06:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:06:29 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.565 (still bad) 2008-Dec-13 19:06:29 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83190.00 2008-Dec-13 19:06:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Dec-13 19:06:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:06:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:06:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Dec-13 19:06:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:06:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Dec-13 19:06:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Dec-13 19:06:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1990.000000 MHz 2008-Dec-13 19:06:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 2000.000000 MHz 2008-Dec-13 19:06:31 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.565 (still bad) 2008-Dec-13 19:06:33 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.554 (still bad) 2008-Dec-13 19:06:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2008-Dec-13 19:06:35 LOG4 check_wapp_levels: WAPP-1 power levels: 1.325 1.320 1.278 1.495 2008-Dec-13 19:06:35 LOG4 check_wapp_levels: WAPP-2 power levels: 1.416 1.374 1.530 1.266 2008-Dec-13 19:06:35 LOG4 check_wapp_levels: WAPP-3 power levels: 1.555 1.311 1.542 1.343 2008-Dec-13 19:06:35 LOG4 check_wapp_levels: WAPP-4 power levels: 1.351 0.104 1.488 0.114 2008-Dec-13 19:06:37 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.552 (still bad) 2008-Dec-13 19:06:39 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.550 (still bad) 2008-Dec-13 19:06:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Dec-13 19:06:40 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Dec-13 19:06:40 LOG5 end_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2008-Dec-13 19:06:40 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Dec-13 19:06:40 LOG5 end_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2008-Dec-13 19:06:40 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2008-Dec-13 19:06:40 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2008-Dec-13 19:06:40 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2008-Dec-13 19:06:40 LOG5 antvel: Calling 'antvel 231427.300000 250956.000000 J 0' 2008-Dec-13 19:06:40 LOG2 antvel: Precessing RA = 23:14:27.3 Dec = +25:09:56.0 Epoch = 2008.95495 J 2008-Dec-13 19:06:40 LOG2 antvel: Computed apparent RA = 23:14:54.1 Dec = +25:13:05.4 2008-Dec-13 19:06:40 LOG2 antvel: Parameters to Doppler: Topocentric 83200 2008 348 0.0 2008-Dec-13 19:06:40 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Dec-13 19:06:40 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2008-Dec-13 19:06:40 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2008-Dec-13 19:06:40 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Dec-13 19:06:40 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Dec-13 19:06:40 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Dec-13 19:06:40 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-13 19:06:40 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Dec-13 19:06:40 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Dec-13 19:06:40 LOG5 begin_task: Level: (3) ID = <10173> Status = 0 0 0 0 ok 2008-Dec-13 19:06:40 LOG5 log_alfabeam: Parameters: 23.240916666666664 25.165555555555553 0.193976 2008.9549522143636 18.999933 2008-Dec-13 19:06:40 LOG4 log_alfabeam: ALFABEAM 0 23.240916666666660 25.165555555555535 2008-Dec-13 19:06:40 LOG4 log_alfabeam: ALFABEAM 1 23.248454259476627 25.137419865947578 2008-Dec-13 19:06:40 LOG4 log_alfabeam: ALFABEAM 2 23.245916896390955 25.229214176306559 2008-Dec-13 19:06:40 LOG4 log_alfabeam: ALFABEAM 3 23.238380007233474 25.257712985488489 2008-Dec-13 19:06:40 LOG4 log_alfabeam: ALFABEAM 4 23.233369536076349 25.193378332747628 2008-Dec-13 19:06:40 LOG4 log_alfabeam: ALFABEAM 5 23.235942398049584 25.101294228513044 2008-Dec-13 19:06:40 LOG4 log_alfabeam: ALFABEAM 6 23.243490055804390 25.073834771190295 2008-Dec-13 19:06:40 INFO2 take_data: Starting WAPP+GALFA scan: 834800051 2008-Dec-13 19:06:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Dec-13 19:06:41 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Dec-13 19:06:41 LOG5 begin_task: Level: (4) ID = <10174> Status = 0 0 0 0 ok 2008-Dec-13 19:06:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Dec-13 19:06:41 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Dec-13 19:06:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-13 19:06:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:06:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:06:41 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.561 (still bad) 2008-Dec-13 19:06:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83202.00 2008-Dec-13 19:06:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Dec-13 19:06:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:06:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:06:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Dec-13 19:06:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:06:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Dec-13 19:06:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Dec-13 19:06:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1990.000000 MHz 2008-Dec-13 19:06:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 2000.000000 MHz 2008-Dec-13 19:06:43 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.561 (still bad) 2008-Dec-13 19:06:45 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.562 (still bad) 2008-Dec-13 19:06:47 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.562 (still bad) 2008-Dec-13 19:06:49 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.562 (still bad) 2008-Dec-13 19:06:51 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.561 (still bad) 2008-Dec-13 19:06:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Dec-13 19:06:52 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Dec-13 19:06:52 LOG5 end_task: Level: (4) ID = <10174> Status = 0 0 0 0 ok 2008-Dec-13 19:06:52 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Dec-13 19:06:52 LOG5 end_task: Level: (3) ID = <10173> Status = 0 0 0 0 ok 2008-Dec-13 19:06:52 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2008-Dec-13 19:06:52 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2008-Dec-13 19:06:52 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2008-Dec-13 19:06:52 LOG5 antvel: Calling 'antvel 231427.300000 250956.000000 J 0' 2008-Dec-13 19:06:52 LOG2 antvel: Precessing RA = 23:14:27.3 Dec = +25:09:56.0 Epoch = 2008.95495 J 2008-Dec-13 19:06:52 LOG2 antvel: Computed apparent RA = 23:14:54.1 Dec = +25:13:05.4 2008-Dec-13 19:06:52 LOG2 antvel: Parameters to Doppler: Topocentric 83212 2008 348 0.0 2008-Dec-13 19:06:52 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Dec-13 19:06:52 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2008-Dec-13 19:06:52 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2008-Dec-13 19:06:52 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Dec-13 19:06:52 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Dec-13 19:06:52 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Dec-13 19:06:52 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-13 19:06:52 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Dec-13 19:06:52 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Dec-13 19:06:52 LOG5 begin_task: Level: (3) ID = <10175> Status = 0 0 0 0 ok 2008-Dec-13 19:06:52 LOG5 log_alfabeam: Parameters: 23.240916666666664 25.165555555555553 0.197318 2008.9549525946206 18.999933 2008-Dec-13 19:06:52 LOG4 log_alfabeam: ALFABEAM 0 23.240916666666667 25.165555555555546 2008-Dec-13 19:06:52 LOG4 log_alfabeam: ALFABEAM 1 23.248457617307956 25.137585872710783 2008-Dec-13 19:06:52 LOG4 log_alfabeam: ALFABEAM 2 23.245909268449086 25.229324794065153 2008-Dec-13 19:06:52 LOG4 log_alfabeam: ALFABEAM 3 23.238368956135332 25.257656475258361 2008-Dec-13 19:06:52 LOG4 log_alfabeam: ALFABEAM 4 23.233366241829405 25.193212774859564 2008-Dec-13 19:06:52 LOG4 log_alfabeam: ALFABEAM 5 23.235950034016550 25.101185818186551 2008-Dec-13 19:06:52 LOG4 log_alfabeam: ALFABEAM 6 23.243500922017308 25.073890791406566 2008-Dec-13 19:06:52 INFO2 take_data: Starting WAPP+GALFA scan: 834800052 2008-Dec-13 19:06:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Dec-13 19:06:53 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Dec-13 19:06:53 LOG5 begin_task: Level: (4) ID = <10176> Status = 0 0 0 0 ok 2008-Dec-13 19:06:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Dec-13 19:06:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Dec-13 19:06:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-13 19:06:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:06:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:06:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83214.00 2008-Dec-13 19:06:54 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.568 (still bad) 2008-Dec-13 19:06:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Dec-13 19:06:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:06:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:06:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Dec-13 19:06:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:06:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Dec-13 19:06:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Dec-13 19:06:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1990.000000 MHz 2008-Dec-13 19:06:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 2000.000000 MHz 2008-Dec-13 19:06:56 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.569 (still bad) 2008-Dec-13 19:06:58 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.570 (still bad) 2008-Dec-13 19:07:00 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.569 (still bad) 2008-Dec-13 19:07:02 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.570 (still bad) 2008-Dec-13 19:07:04 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.569 (still bad) 2008-Dec-13 19:07:04 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Dec-13 19:07:04 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Dec-13 19:07:04 LOG5 end_task: Level: (4) ID = <10176> Status = 0 0 0 0 ok 2008-Dec-13 19:07:04 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Dec-13 19:07:04 LOG5 end_task: Level: (3) ID = <10175> Status = 0 0 0 0 ok 2008-Dec-13 19:07:04 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2008-Dec-13 19:07:04 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2008-Dec-13 19:07:04 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2008-Dec-13 19:07:04 LOG5 antvel: Calling 'antvel 231427.300000 250956.000000 J 0' 2008-Dec-13 19:07:04 LOG2 antvel: Precessing RA = 23:14:27.3 Dec = +25:09:56.0 Epoch = 2008.95495 J 2008-Dec-13 19:07:04 LOG2 antvel: Computed apparent RA = 23:14:54.1 Dec = +25:13:05.4 2008-Dec-13 19:07:04 LOG2 antvel: Parameters to Doppler: Topocentric 83224 2008 348 0.0 2008-Dec-13 19:07:04 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Dec-13 19:07:04 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2008-Dec-13 19:07:04 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2008-Dec-13 19:07:04 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Dec-13 19:07:04 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Dec-13 19:07:04 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Dec-13 19:07:04 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-13 19:07:04 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Dec-13 19:07:04 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Dec-13 19:07:04 LOG5 begin_task: Level: (3) ID = <10177> Status = 0 0 0 0 ok 2008-Dec-13 19:07:04 LOG5 log_alfabeam: Parameters: 23.240916666666664 25.165555555555553 0.200660 2008.9549529748776 18.999933 2008-Dec-13 19:07:04 LOG4 log_alfabeam: ALFABEAM 0 23.240916666666664 25.165555555555542 2008-Dec-13 19:07:04 LOG4 log_alfabeam: ALFABEAM 1 23.248460938924534 25.137751135031053 2008-Dec-13 19:07:04 LOG4 log_alfabeam: ALFABEAM 2 23.245901664874751 25.229434699945266 2008-Dec-13 19:07:04 LOG4 log_alfabeam: ALFABEAM 3 23.238357966254313 25.257600000947985 2008-Dec-13 19:07:04 LOG4 log_alfabeam: ALFABEAM 4 23.233362983384318 25.193047961143389 2008-Dec-13 19:07:04 LOG4 log_alfabeam: ALFABEAM 5 23.235957645065014 25.101078108146819 2008-Dec-13 19:07:04 LOG4 log_alfabeam: ALFABEAM 6 23.243511728135186 25.073946771185526 2008-Dec-13 19:07:04 INFO2 take_data: Starting WAPP+GALFA scan: 834800053 2008-Dec-13 19:07:05 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Dec-13 19:07:05 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Dec-13 19:07:05 LOG5 begin_task: Level: (4) ID = <10178> Status = 0 0 0 0 ok 2008-Dec-13 19:07:05 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Dec-13 19:07:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Dec-13 19:07:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-13 19:07:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:07:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:07:05 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83226.00 2008-Dec-13 19:07:06 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.574 (still bad) 2008-Dec-13 19:07:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Dec-13 19:07:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:07:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:07:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Dec-13 19:07:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:07:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Dec-13 19:07:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Dec-13 19:07:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1990.000000 MHz 2008-Dec-13 19:07:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 2000.000000 MHz 2008-Dec-13 19:07:08 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.580 (still bad) 2008-Dec-13 19:07:10 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.577 (still bad) 2008-Dec-13 19:07:12 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.580 (still bad) 2008-Dec-13 19:07:14 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.579 (still bad) 2008-Dec-13 19:07:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Dec-13 19:07:16 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Dec-13 19:07:16 LOG5 end_task: Level: (4) ID = <10178> Status = 0 0 0 0 ok 2008-Dec-13 19:07:16 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Dec-13 19:07:16 LOG5 end_task: Level: (3) ID = <10177> Status = 0 0 0 0 ok 2008-Dec-13 19:07:16 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2008-Dec-13 19:07:16 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2008-Dec-13 19:07:16 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2008-Dec-13 19:07:16 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Dec-13 19:07:16 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Dec-13 19:07:16 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Dec-13 19:07:16 LOG5 begin_task: Level: (3) ID = <10179> Status = 0 0 0 0 ok 2008-Dec-13 19:07:16 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.585 (still bad) 2008-Dec-13 19:07:16 LOG3 CALCONTROL-caltrig: Software trigger 2008-Dec-13 19:07:16 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Dec-13 19:07:16 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Dec-13 19:07:16 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Dec-13 19:07:16 LOG5 end_task: Level: (3) ID = <10179> Status = 0 0 0 0 ok 2008-Dec-13 19:07:16 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2008-Dec-13 19:07:16 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2008-Dec-13 19:07:16 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2008-Dec-13 19:07:16 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2008-Dec-13 19:07:16 LOG5 antvel: Calling 'antvel 231427.300000 250956.000000 J 0' 2008-Dec-13 19:07:16 LOG2 antvel: Precessing RA = 23:14:27.3 Dec = +25:09:56.0 Epoch = 2008.95495 J 2008-Dec-13 19:07:16 LOG2 antvel: Computed apparent RA = 23:14:54.1 Dec = +25:13:05.4 2008-Dec-13 19:07:16 LOG2 antvel: Parameters to Doppler: Topocentric 83236 2008 348 0.0 2008-Dec-13 19:07:16 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Dec-13 19:07:16 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2008-Dec-13 19:07:16 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2008-Dec-13 19:07:16 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Dec-13 19:07:16 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Dec-13 19:07:16 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Dec-13 19:07:16 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-13 19:07:16 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Dec-13 19:07:16 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Dec-13 19:07:16 LOG5 begin_task: Level: (3) ID = <10180> Status = 0 0 0 0 ok 2008-Dec-13 19:07:16 LOG5 log_alfabeam: Parameters: 23.240916666666664 25.165555555555553 0.204003 2008.9549533551349 18.999933 2008-Dec-13 19:07:16 LOG4 log_alfabeam: ALFABEAM 0 23.240916666666664 25.165555555555553 2008-Dec-13 19:07:16 LOG4 log_alfabeam: ALFABEAM 1 23.248464225710141 25.137915706700902 2008-Dec-13 19:07:16 LOG4 log_alfabeam: ALFABEAM 2 23.245894083333930 25.229543932800844 2008-Dec-13 19:07:16 LOG4 log_alfabeam: ALFABEAM 3 23.238347033847006 25.257543547293285 2008-Dec-13 19:07:16 LOG4 log_alfabeam: ALFABEAM 4 23.233359759379280 25.192883837920824 2008-Dec-13 19:07:16 LOG4 log_alfabeam: ALFABEAM 5 23.235965233539389 25.100971060257649 2008-Dec-13 19:07:16 LOG4 log_alfabeam: ALFABEAM 6 23.243522477839075 25.074002725740616 2008-Dec-13 19:07:16 INFO2 take_data: Starting WAPP+GALFA scan: 834800054 2008-Dec-13 19:07:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Dec-13 19:07:17 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Dec-13 19:07:17 LOG5 begin_task: Level: (4) ID = <10181> Status = 0 0 0 0 ok 2008-Dec-13 19:07:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Dec-13 19:07:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Dec-13 19:07:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-13 19:07:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:07:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:07:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83238.00 2008-Dec-13 19:07:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Dec-13 19:07:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:07:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:07:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Dec-13 19:07:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:07:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Dec-13 19:07:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Dec-13 19:07:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1990.000000 MHz 2008-Dec-13 19:07:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 2000.000000 MHz 2008-Dec-13 19:07:19 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.510 (still bad) 2008-Dec-13 19:07:21 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.205 (still bad) 2008-Dec-13 19:07:23 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.209 (still bad) 2008-Dec-13 19:07:25 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.203 (still bad) 2008-Dec-13 19:07:27 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.206 (still bad) 2008-Dec-13 19:07:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Dec-13 19:07:28 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Dec-13 19:07:28 LOG5 end_task: Level: (4) ID = <10181> Status = 0 0 0 0 ok 2008-Dec-13 19:07:28 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Dec-13 19:07:28 LOG5 end_task: Level: (3) ID = <10180> Status = 0 0 0 0 ok 2008-Dec-13 19:07:28 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2008-Dec-13 19:07:28 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2008-Dec-13 19:07:28 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2008-Dec-13 19:07:28 LOG5 antvel: Calling 'antvel 231427.300000 250956.000000 J 0' 2008-Dec-13 19:07:28 LOG2 antvel: Precessing RA = 23:14:27.3 Dec = +25:09:56.0 Epoch = 2008.95495 J 2008-Dec-13 19:07:28 LOG2 antvel: Computed apparent RA = 23:14:54.1 Dec = +25:13:05.4 2008-Dec-13 19:07:28 LOG2 antvel: Parameters to Doppler: Topocentric 83248 2008 348 0.0 2008-Dec-13 19:07:28 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Dec-13 19:07:28 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2008-Dec-13 19:07:28 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2008-Dec-13 19:07:28 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Dec-13 19:07:28 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Dec-13 19:07:28 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Dec-13 19:07:28 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-13 19:07:28 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Dec-13 19:07:28 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Dec-13 19:07:28 LOG5 begin_task: Level: (3) ID = <10182> Status = 0 0 0 0 ok 2008-Dec-13 19:07:28 LOG5 log_alfabeam: Parameters: 23.240916666666664 25.165555555555553 0.207345 2008.9549537353919 18.999933 2008-Dec-13 19:07:28 LOG4 log_alfabeam: ALFABEAM 0 23.240916666666660 25.165555555555546 2008-Dec-13 19:07:28 LOG4 log_alfabeam: ALFABEAM 1 23.248467476099286 25.138079493911629 2008-Dec-13 19:07:28 LOG4 log_alfabeam: ALFABEAM 2 23.245886528291638 25.229652433502736 2008-Dec-13 19:07:28 LOG4 log_alfabeam: ALFABEAM 3 23.238336164975802 25.257487149647545 2008-Dec-13 19:07:28 LOG4 log_alfabeam: ALFABEAM 4 23.233356571345450 25.192720498712671 2008-Dec-13 19:07:28 LOG4 log_alfabeam: ALFABEAM 5 23.235972794978721 25.100864732406563 2008-Dec-13 19:07:28 LOG4 log_alfabeam: ALFABEAM 6 23.243533165168021 25.074058620114549 2008-Dec-13 19:07:28 INFO2 take_data: Starting WAPP+GALFA scan: 834800055 2008-Dec-13 19:07:29 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Dec-13 19:07:29 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Dec-13 19:07:29 LOG5 begin_task: Level: (4) ID = <10183> Status = 0 0 0 0 ok 2008-Dec-13 19:07:29 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Dec-13 19:07:29 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Dec-13 19:07:29 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-13 19:07:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:07:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:07:29 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83250.00 2008-Dec-13 19:07:30 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.211 (still bad) 2008-Dec-13 19:07:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Dec-13 19:07:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:07:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:07:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Dec-13 19:07:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:07:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Dec-13 19:07:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Dec-13 19:07:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1990.000000 MHz 2008-Dec-13 19:07:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 2000.000000 MHz 2008-Dec-13 19:07:32 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.141 (still bad) 2008-Dec-13 19:07:34 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.144 (still bad) 2008-Dec-13 19:07:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2008-Dec-13 19:07:36 LOG4 check_wapp_levels: WAPP-1 power levels: 0.971 0.993 0.965 1.126 2008-Dec-13 19:07:36 LOG4 check_wapp_levels: WAPP-2 power levels: 1.047 1.020 1.135 0.947 2008-Dec-13 19:07:36 LOG4 check_wapp_levels: WAPP-3 power levels: 1.142 0.967 1.131 1.023 2008-Dec-13 19:07:36 LOG4 check_wapp_levels: WAPP-4 power levels: 0.977 0.104 1.077 0.114 2008-Dec-13 19:07:38 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.142 (still bad) 2008-Dec-13 19:07:40 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.148 (still bad) 2008-Dec-13 19:07:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Dec-13 19:07:40 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Dec-13 19:07:40 LOG5 end_task: Level: (4) ID = <10183> Status = 0 0 0 0 ok 2008-Dec-13 19:07:40 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Dec-13 19:07:40 LOG5 end_task: Level: (3) ID = <10182> Status = 0 0 0 0 ok 2008-Dec-13 19:07:40 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2008-Dec-13 19:07:40 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2008-Dec-13 19:07:40 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2008-Dec-13 19:07:40 LOG5 antvel: Calling 'antvel 231427.300000 250956.000000 J 0' 2008-Dec-13 19:07:40 LOG2 antvel: Precessing RA = 23:14:27.3 Dec = +25:09:56.0 Epoch = 2008.95495 J 2008-Dec-13 19:07:40 LOG2 antvel: Computed apparent RA = 23:14:54.1 Dec = +25:13:05.4 2008-Dec-13 19:07:40 LOG2 antvel: Parameters to Doppler: Topocentric 83260 2008 348 0.0 2008-Dec-13 19:07:40 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Dec-13 19:07:40 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2008-Dec-13 19:07:40 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2008-Dec-13 19:07:40 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Dec-13 19:07:40 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Dec-13 19:07:40 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Dec-13 19:07:40 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-13 19:07:40 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Dec-13 19:07:40 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Dec-13 19:07:40 LOG5 begin_task: Level: (3) ID = <10184> Status = 0 0 0 0 ok 2008-Dec-13 19:07:40 LOG5 log_alfabeam: Parameters: 23.240916666666664 25.165555555555553 0.210688 2008.9549541156489 18.999933 2008-Dec-13 19:07:40 LOG4 log_alfabeam: ALFABEAM 0 23.240916666666667 25.165555555555560 2008-Dec-13 19:07:40 LOG4 log_alfabeam: ALFABEAM 1 23.248470692433120 25.138242599305201 2008-Dec-13 19:07:40 LOG4 log_alfabeam: ALFABEAM 2 23.245878995154971 25.229760273142613 2008-Dec-13 19:07:40 LOG4 log_alfabeam: ALFABEAM 3 23.238325352662244 25.257430775801826 2008-Dec-13 19:07:40 LOG4 log_alfabeam: ALFABEAM 4 23.233353416982208 25.192557841126121 2008-Dec-13 19:07:40 LOG4 log_alfabeam: ALFABEAM 5 23.235980333987921 25.100759054867847 2008-Dec-13 19:07:40 LOG4 log_alfabeam: ALFABEAM 6 23.243543796984014 25.074114486311110 2008-Dec-13 19:07:40 INFO2 take_data: Starting WAPP+GALFA scan: 834800056 2008-Dec-13 19:07:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Dec-13 19:07:41 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Dec-13 19:07:41 LOG5 begin_task: Level: (4) ID = <10185> Status = 0 0 0 0 ok 2008-Dec-13 19:07:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Dec-13 19:07:41 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Dec-13 19:07:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-13 19:07:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:07:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:07:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83262.00 2008-Dec-13 19:07:42 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.148 (still bad) 2008-Dec-13 19:07:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Dec-13 19:07:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:07:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:07:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Dec-13 19:07:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:07:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Dec-13 19:07:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Dec-13 19:07:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1990.000000 MHz 2008-Dec-13 19:07:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 2000.000000 MHz 2008-Dec-13 19:07:44 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.142 (still bad) 2008-Dec-13 19:07:46 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.144 (still bad) 2008-Dec-13 19:07:48 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.141 (still bad) 2008-Dec-13 19:07:50 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.142 (still bad) 2008-Dec-13 19:07:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Dec-13 19:07:52 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Dec-13 19:07:52 LOG5 end_task: Level: (4) ID = <10185> Status = 0 0 0 0 ok 2008-Dec-13 19:07:52 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Dec-13 19:07:52 LOG5 end_task: Level: (3) ID = <10184> Status = 0 0 0 0 ok 2008-Dec-13 19:07:52 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2008-Dec-13 19:07:52 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2008-Dec-13 19:07:52 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2008-Dec-13 19:07:52 LOG5 antvel: Calling 'antvel 231427.300000 250956.000000 J 0' 2008-Dec-13 19:07:52 LOG2 antvel: Precessing RA = 23:14:27.3 Dec = +25:09:56.0 Epoch = 2008.95495 J 2008-Dec-13 19:07:52 LOG2 antvel: Computed apparent RA = 23:14:54.1 Dec = +25:13:05.4 2008-Dec-13 19:07:52 LOG2 antvel: Parameters to Doppler: Topocentric 83272 2008 348 0.0 2008-Dec-13 19:07:52 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Dec-13 19:07:52 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2008-Dec-13 19:07:52 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2008-Dec-13 19:07:52 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Dec-13 19:07:52 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Dec-13 19:07:52 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Dec-13 19:07:52 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-13 19:07:52 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Dec-13 19:07:52 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Dec-13 19:07:52 LOG5 begin_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2008-Dec-13 19:07:52 LOG5 log_alfabeam: Parameters: 23.240916666666664 25.165555555555553 0.214030 2008.9549544959059 18.999933 2008-Dec-13 19:07:52 LOG4 log_alfabeam: ALFABEAM 0 23.240916666666667 25.165555555555539 2008-Dec-13 19:07:52 LOG4 log_alfabeam: ALFABEAM 1 23.248473873178263 25.138404929897554 2008-Dec-13 19:07:52 LOG4 log_alfabeam: ALFABEAM 2 23.245871488358233 25.229867393298470 2008-Dec-13 19:07:52 LOG4 log_alfabeam: ALFABEAM 3 23.238314602905305 25.257374460986902 2008-Dec-13 19:07:52 LOG4 log_alfabeam: ALFABEAM 4 23.233350297789062 25.192395957858658 2008-Dec-13 19:07:52 LOG4 log_alfabeam: ALFABEAM 5 23.235987846137167 25.100654084835369 2008-Dec-13 19:07:52 LOG4 log_alfabeam: ALFABEAM 6 23.243554367388313 25.074170289497474 2008-Dec-13 19:07:52 INFO2 take_data: Starting WAPP+GALFA scan: 834800057 2008-Dec-13 19:07:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Dec-13 19:07:53 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Dec-13 19:07:53 LOG5 begin_task: Level: (4) ID = <10187> Status = 0 0 0 0 ok 2008-Dec-13 19:07:53 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.145 (still bad) 2008-Dec-13 19:07:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Dec-13 19:07:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Dec-13 19:07:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-13 19:07:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:07:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:07:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83274.00 2008-Dec-13 19:07:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Dec-13 19:07:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:07:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:07:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Dec-13 19:07:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:07:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Dec-13 19:07:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Dec-13 19:07:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1990.000000 MHz 2008-Dec-13 19:07:55 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.145 (still bad) 2008-Dec-13 19:07:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 2000.000000 MHz 2008-Dec-13 19:07:57 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.137 (still bad) 2008-Dec-13 19:07:59 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.141 (still bad) 2008-Dec-13 19:08:01 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.140 (still bad) 2008-Dec-13 19:08:03 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.142 (still bad) 2008-Dec-13 19:08:04 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Dec-13 19:08:04 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Dec-13 19:08:04 LOG5 end_task: Level: (4) ID = <10187> Status = 0 0 0 0 ok 2008-Dec-13 19:08:04 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Dec-13 19:08:04 LOG5 end_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2008-Dec-13 19:08:04 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2008-Dec-13 19:08:04 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2008-Dec-13 19:08:04 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2008-Dec-13 19:08:04 LOG5 antvel: Calling 'antvel 231427.300000 250956.000000 J 0' 2008-Dec-13 19:08:04 LOG2 antvel: Precessing RA = 23:14:27.3 Dec = +25:09:56.0 Epoch = 2008.95495 J 2008-Dec-13 19:08:04 LOG2 antvel: Computed apparent RA = 23:14:54.1 Dec = +25:13:05.4 2008-Dec-13 19:08:04 LOG2 antvel: Parameters to Doppler: Topocentric 83284 2008 348 0.0 2008-Dec-13 19:08:04 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Dec-13 19:08:04 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2008-Dec-13 19:08:04 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2008-Dec-13 19:08:04 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Dec-13 19:08:04 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Dec-13 19:08:04 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Dec-13 19:08:04 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-13 19:08:04 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Dec-13 19:08:04 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Dec-13 19:08:04 LOG5 begin_task: Level: (3) ID = <10188> Status = 0 0 0 0 ok 2008-Dec-13 19:08:04 LOG5 log_alfabeam: Parameters: 23.240916666666664 25.165555555555553 0.217373 2008.9549548761629 18.999933 2008-Dec-13 19:08:04 LOG4 log_alfabeam: ALFABEAM 0 23.240916666666667 25.165555555555557 2008-Dec-13 19:08:04 LOG4 log_alfabeam: ALFABEAM 1 23.248477020624257 25.138566587406252 2008-Dec-13 19:08:04 LOG4 log_alfabeam: ALFABEAM 2 23.245864003335651 25.229973864110683 2008-Dec-13 19:08:04 LOG4 log_alfabeam: ALFABEAM 3 23.238303908806174 25.257318172970017 2008-Dec-13 19:08:04 LOG4 log_alfabeam: ALFABEAM 4 23.233347211516442 25.192234747442399 2008-Dec-13 19:08:04 LOG4 log_alfabeam: ALFABEAM 5 23.235995336003310 25.100549753520866 2008-Dec-13 19:08:04 LOG4 log_alfabeam: ALFABEAM 6 23.243564883164659 25.074226061693079 2008-Dec-13 19:08:04 INFO2 take_data: Starting WAPP+GALFA scan: 834800058 2008-Dec-13 19:08:05 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Dec-13 19:08:05 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Dec-13 19:08:05 LOG5 begin_task: Level: (4) ID = <10189> Status = 0 0 0 0 ok 2008-Dec-13 19:08:05 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Dec-13 19:08:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Dec-13 19:08:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-13 19:08:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:08:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:08:05 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.145 (still bad) 2008-Dec-13 19:08:05 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83286.00 2008-Dec-13 19:08:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Dec-13 19:08:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:08:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:08:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Dec-13 19:08:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:08:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Dec-13 19:08:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Dec-13 19:08:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1990.000000 MHz 2008-Dec-13 19:08:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 2000.000000 MHz 2008-Dec-13 19:08:07 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.145 (still bad) 2008-Dec-13 19:08:09 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.147 (still bad) 2008-Dec-13 19:08:11 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.148 (still bad) 2008-Dec-13 19:08:13 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.146 (still bad) 2008-Dec-13 19:08:15 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.146 (still bad) 2008-Dec-13 19:08:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Dec-13 19:08:16 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Dec-13 19:08:16 LOG5 end_task: Level: (4) ID = <10189> Status = 0 0 0 0 ok 2008-Dec-13 19:08:16 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Dec-13 19:08:16 LOG5 end_task: Level: (3) ID = <10188> Status = 0 0 0 0 ok 2008-Dec-13 19:08:16 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2008-Dec-13 19:08:16 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2008-Dec-13 19:08:16 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2008-Dec-13 19:08:16 LOG5 antvel: Calling 'antvel 231427.300000 250956.000000 J 0' 2008-Dec-13 19:08:16 LOG2 antvel: Precessing RA = 23:14:27.3 Dec = +25:09:56.0 Epoch = 2008.95496 J 2008-Dec-13 19:08:16 LOG2 antvel: Computed apparent RA = 23:14:54.1 Dec = +25:13:05.4 2008-Dec-13 19:08:16 LOG2 antvel: Parameters to Doppler: Topocentric 83296 2008 348 0.0 2008-Dec-13 19:08:16 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Dec-13 19:08:16 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2008-Dec-13 19:08:16 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2008-Dec-13 19:08:16 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Dec-13 19:08:16 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Dec-13 19:08:16 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Dec-13 19:08:16 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-13 19:08:16 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Dec-13 19:08:16 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Dec-13 19:08:16 LOG5 begin_task: Level: (3) ID = <10190> Status = 0 0 0 0 ok 2008-Dec-13 19:08:16 LOG5 log_alfabeam: Parameters: 23.240916666666664 25.165555555555553 0.220715 2008.9549552564201 18.999933 2008-Dec-13 19:08:16 LOG4 log_alfabeam: ALFABEAM 0 23.240916666666664 25.165555555555542 2008-Dec-13 19:08:16 LOG4 log_alfabeam: ALFABEAM 1 23.248480133269144 25.138727479660666 2008-Dec-13 19:08:16 LOG4 log_alfabeam: ALFABEAM 2 23.245856544491154 25.230079627852433 2008-Dec-13 19:08:16 LOG4 log_alfabeam: ALFABEAM 3 23.238293276301395 25.257261946858552 2008-Dec-13 19:08:16 LOG4 log_alfabeam: ALFABEAM 4 23.233344159632860 25.192074301762720 2008-Dec-13 19:08:16 LOG4 log_alfabeam: ALFABEAM 5 23.236002799187368 25.100446117436210 2008-Dec-13 19:08:16 LOG4 log_alfabeam: ALFABEAM 6 23.243575338475512 25.074281768190165 2008-Dec-13 19:08:16 INFO2 take_data: Starting WAPP+GALFA scan: 834800059 2008-Dec-13 19:08:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Dec-13 19:08:17 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Dec-13 19:08:17 LOG5 begin_task: Level: (4) ID = <10191> Status = 0 0 0 0 ok 2008-Dec-13 19:08:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Dec-13 19:08:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Dec-13 19:08:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-13 19:08:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:08:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:08:17 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.152 (still bad) 2008-Dec-13 19:08:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83298.00 2008-Dec-13 19:08:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Dec-13 19:08:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:08:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:08:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Dec-13 19:08:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:08:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Dec-13 19:08:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Dec-13 19:08:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1990.000000 MHz 2008-Dec-13 19:08:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 2000.000000 MHz 2008-Dec-13 19:08:19 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.152 (still bad) 2008-Dec-13 19:08:21 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.152 (still bad) 2008-Dec-13 19:08:23 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.153 (still bad) 2008-Dec-13 19:08:25 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.151 (still bad) 2008-Dec-13 19:08:27 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.154 (still bad) 2008-Dec-13 19:08:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Dec-13 19:08:28 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Dec-13 19:08:28 LOG5 end_task: Level: (4) ID = <10191> Status = 0 0 0 0 ok 2008-Dec-13 19:08:28 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Dec-13 19:08:28 LOG5 end_task: Level: (3) ID = <10190> Status = 0 0 0 0 ok 2008-Dec-13 19:08:28 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2008-Dec-13 19:08:28 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2008-Dec-13 19:08:28 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2008-Dec-13 19:08:28 LOG5 antvel: Calling 'antvel 231427.300000 250956.000000 J 0' 2008-Dec-13 19:08:28 LOG2 antvel: Precessing RA = 23:14:27.3 Dec = +25:09:56.0 Epoch = 2008.95496 J 2008-Dec-13 19:08:28 LOG2 antvel: Computed apparent RA = 23:14:54.1 Dec = +25:13:05.4 2008-Dec-13 19:08:28 LOG2 antvel: Parameters to Doppler: Topocentric 83308 2008 348 0.0 2008-Dec-13 19:08:28 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Dec-13 19:08:28 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2008-Dec-13 19:08:28 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2008-Dec-13 19:08:28 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Dec-13 19:08:28 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Dec-13 19:08:28 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Dec-13 19:08:28 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-13 19:08:28 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Dec-13 19:08:28 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Dec-13 19:08:28 LOG5 begin_task: Level: (3) ID = <10192> Status = 0 0 0 0 ok 2008-Dec-13 19:08:28 LOG5 log_alfabeam: Parameters: 23.240916666666664 25.165555555555553 0.224058 2008.9549556366771 18.999933 2008-Dec-13 19:08:28 LOG4 log_alfabeam: ALFABEAM 0 23.240916666666664 25.165555555555557 2008-Dec-13 19:08:28 LOG4 log_alfabeam: ALFABEAM 1 23.248483213352060 25.138887707464701 2008-Dec-13 19:08:28 LOG4 log_alfabeam: ALFABEAM 2 23.245849107286077 25.230184753729844 2008-Dec-13 19:08:28 LOG4 log_alfabeam: ALFABEAM 3 23.238282698570547 25.257205750402242 2008-Dec-13 19:08:28 LOG4 log_alfabeam: ALFABEAM 4 23.233341139938670 25.191914520265733 2008-Dec-13 19:08:28 LOG4 log_alfabeam: ALFABEAM 5 23.236010240238230 25.100343108713659 2008-Dec-13 19:08:28 LOG4 log_alfabeam: ALFABEAM 6 23.243585740027637 25.074337441017800 2008-Dec-13 19:08:28 INFO2 take_data: Starting WAPP+GALFA scan: 834800060 2008-Dec-13 19:08:29 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Dec-13 19:08:29 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Dec-13 19:08:29 LOG5 begin_task: Level: (4) ID = <10193> Status = 0 0 0 0 ok 2008-Dec-13 19:08:29 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Dec-13 19:08:29 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Dec-13 19:08:29 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-13 19:08:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:08:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:08:29 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83310.00 2008-Dec-13 19:08:30 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.155 (still bad) 2008-Dec-13 19:08:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Dec-13 19:08:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:08:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:08:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Dec-13 19:08:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:08:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Dec-13 19:08:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Dec-13 19:08:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1990.000000 MHz 2008-Dec-13 19:08:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 2000.000000 MHz 2008-Dec-13 19:08:32 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.158 (still bad) 2008-Dec-13 19:08:34 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.156 (still bad) 2008-Dec-13 19:08:36 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.158 (still bad) 2008-Dec-13 19:08:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2008-Dec-13 19:08:38 LOG4 check_wapp_levels: WAPP-1 power levels: 0.982 0.990 0.973 1.127 2008-Dec-13 19:08:38 LOG4 check_wapp_levels: WAPP-2 power levels: 1.050 1.006 1.128 0.945 2008-Dec-13 19:08:38 LOG4 check_wapp_levels: WAPP-3 power levels: 1.158 0.972 1.125 1.016 2008-Dec-13 19:08:38 LOG4 check_wapp_levels: WAPP-4 power levels: 0.992 0.104 1.093 0.115 2008-Dec-13 19:08:40 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.159 (still bad) 2008-Dec-13 19:08:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Dec-13 19:08:40 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Dec-13 19:08:40 LOG5 end_task: Level: (4) ID = <10193> Status = 0 0 0 0 ok 2008-Dec-13 19:08:40 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Dec-13 19:08:40 LOG5 end_task: Level: (3) ID = <10192> Status = 0 0 0 0 ok 2008-Dec-13 19:08:40 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2008-Dec-13 19:08:40 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Dec-13 19:08:40 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Dec-13 19:08:40 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Dec-13 19:08:40 LOG5 begin_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2008-Dec-13 19:08:40 LOG3 CALCONTROL-caltrig: Software trigger 2008-Dec-13 19:08:40 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Dec-13 19:08:40 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Dec-13 19:08:40 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Dec-13 19:08:40 LOG5 end_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2008-Dec-13 19:08:40 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2008-Dec-13 19:08:40 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2008-Dec-13 19:08:40 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2008-Dec-13 19:08:40 LOG5 antvel: Calling 'antvel 231427.300000 250956.000000 J 0' 2008-Dec-13 19:08:40 LOG2 antvel: Precessing RA = 23:14:27.3 Dec = +25:09:56.0 Epoch = 2008.95496 J 2008-Dec-13 19:08:40 LOG2 antvel: Computed apparent RA = 23:14:54.1 Dec = +25:13:05.4 2008-Dec-13 19:08:40 LOG2 antvel: Parameters to Doppler: Topocentric 83320 2008 348 0.0 2008-Dec-13 19:08:40 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Dec-13 19:08:40 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2008-Dec-13 19:08:40 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2008-Dec-13 19:08:40 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Dec-13 19:08:40 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Dec-13 19:08:40 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Dec-13 19:08:40 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-13 19:08:40 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Dec-13 19:08:40 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Dec-13 19:08:40 LOG5 begin_task: Level: (3) ID = <10195> Status = 0 0 0 0 ok 2008-Dec-13 19:08:40 LOG5 log_alfabeam: Parameters: 23.240916666666664 25.165555555555553 0.227400 2008.9549560169341 18.999933 2008-Dec-13 19:08:40 LOG4 log_alfabeam: ALFABEAM 0 23.240916666666667 25.165555555555557 2008-Dec-13 19:08:40 LOG4 log_alfabeam: ALFABEAM 1 23.248486259401808 25.139047179450191 2008-Dec-13 19:08:40 LOG4 log_alfabeam: ALFABEAM 2 23.245841696094232 25.230289184699547 2008-Dec-13 19:08:40 LOG4 log_alfabeam: ALFABEAM 3 23.238272181488703 25.257149618584496 2008-Dec-13 19:08:40 LOG4 log_alfabeam: ALFABEAM 4 23.233338153872012 25.191755494035746 2008-Dec-13 19:08:40 LOG4 log_alfabeam: ALFABEAM 5 23.236017654787389 25.100240783194678 2008-Dec-13 19:08:40 LOG4 log_alfabeam: ALFABEAM 6 23.243596082043769 25.074393045593897 2008-Dec-13 19:08:40 INFO2 take_data: Starting WAPP+GALFA scan: 834800061 2008-Dec-13 19:08:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Dec-13 19:08:41 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Dec-13 19:08:41 LOG5 begin_task: Level: (4) ID = <10196> Status = 0 0 0 0 ok 2008-Dec-13 19:08:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Dec-13 19:08:41 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Dec-13 19:08:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-13 19:08:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:08:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:08:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83322.00 2008-Dec-13 19:08:42 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.160 (still bad) 2008-Dec-13 19:08:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Dec-13 19:08:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:08:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:08:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Dec-13 19:08:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:08:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Dec-13 19:08:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Dec-13 19:08:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1990.000000 MHz 2008-Dec-13 19:08:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 2000.000000 MHz 2008-Dec-13 19:08:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.670 (still bad) 2008-Dec-13 19:08:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.671 (still bad) 2008-Dec-13 19:08:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.680 (still bad) 2008-Dec-13 19:08:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.669 (still bad) 2008-Dec-13 19:08:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Dec-13 19:08:52 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Dec-13 19:08:52 LOG5 end_task: Level: (4) ID = <10196> Status = 0 0 0 0 ok 2008-Dec-13 19:08:52 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Dec-13 19:08:52 LOG5 end_task: Level: (3) ID = <10195> Status = 0 0 0 0 ok 2008-Dec-13 19:08:52 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2008-Dec-13 19:08:52 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2008-Dec-13 19:08:52 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2008-Dec-13 19:08:52 LOG5 antvel: Calling 'antvel 231427.300000 250956.000000 J 0' 2008-Dec-13 19:08:52 LOG2 antvel: Precessing RA = 23:14:27.3 Dec = +25:09:56.0 Epoch = 2008.95496 J 2008-Dec-13 19:08:52 LOG2 antvel: Computed apparent RA = 23:14:54.1 Dec = +25:13:05.4 2008-Dec-13 19:08:52 LOG2 antvel: Parameters to Doppler: Topocentric 83332 2008 348 0.0 2008-Dec-13 19:08:52 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Dec-13 19:08:52 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2008-Dec-13 19:08:52 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2008-Dec-13 19:08:52 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Dec-13 19:08:52 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Dec-13 19:08:52 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Dec-13 19:08:52 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-13 19:08:52 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Dec-13 19:08:52 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Dec-13 19:08:52 LOG5 begin_task: Level: (3) ID = <10197> Status = 0 0 0 0 ok 2008-Dec-13 19:08:52 LOG5 log_alfabeam: Parameters: 23.240916666666664 25.165555555555553 0.230743 2008.9549563971912 18.999933 2008-Dec-13 19:08:52 LOG4 log_alfabeam: ALFABEAM 0 23.240916666666660 25.165555555555557 2008-Dec-13 19:08:52 LOG4 log_alfabeam: ALFABEAM 1 23.248489273608293 25.139205995518083 2008-Dec-13 19:08:52 LOG4 log_alfabeam: ALFABEAM 2 23.245834306404031 25.230392989050173 2008-Dec-13 19:08:52 LOG4 log_alfabeam: ALFABEAM 3 23.238261718312614 25.257093519143552 2008-Dec-13 19:08:52 LOG4 log_alfabeam: ALFABEAM 4 23.233335199281957 25.191597123422095 2008-Dec-13 19:08:52 LOG4 log_alfabeam: ALFABEAM 5 23.236025047355852 25.100139073915322 2008-Dec-13 19:08:52 LOG4 log_alfabeam: ALFABEAM 6 23.243606371154851 25.074448613951354 2008-Dec-13 19:08:52 INFO2 take_data: Starting WAPP+GALFA scan: 834800062 2008-Dec-13 19:08:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Dec-13 19:08:53 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Dec-13 19:08:53 LOG5 begin_task: Level: (4) ID = <10198> Status = 0 0 0 0 ok 2008-Dec-13 19:08:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.675 (still bad) 2008-Dec-13 19:08:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Dec-13 19:08:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Dec-13 19:08:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-13 19:08:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:08:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:08:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83334.00 2008-Dec-13 19:08:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Dec-13 19:08:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:08:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:08:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Dec-13 19:08:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:08:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Dec-13 19:08:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Dec-13 19:08:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1990.000000 MHz 2008-Dec-13 19:08:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.589 (still bad) 2008-Dec-13 19:08:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 2000.000000 MHz 2008-Dec-13 19:08:57 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.587 (still bad) 2008-Dec-13 19:08:59 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.592 (still bad) 2008-Dec-13 19:09:01 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.587 (still bad) 2008-Dec-13 19:09:03 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.590 (still bad) 2008-Dec-13 19:09:04 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Dec-13 19:09:04 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Dec-13 19:09:04 LOG5 end_task: Level: (4) ID = <10198> Status = 0 0 0 0 ok 2008-Dec-13 19:09:04 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Dec-13 19:09:04 LOG5 end_task: Level: (3) ID = <10197> Status = 0 0 0 0 ok 2008-Dec-13 19:09:04 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2008-Dec-13 19:09:04 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2008-Dec-13 19:09:04 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2008-Dec-13 19:09:04 LOG5 antvel: Calling 'antvel 231427.300000 250956.000000 J 0' 2008-Dec-13 19:09:04 LOG2 antvel: Precessing RA = 23:14:27.3 Dec = +25:09:56.0 Epoch = 2008.95496 J 2008-Dec-13 19:09:04 LOG2 antvel: Computed apparent RA = 23:14:54.1 Dec = +25:13:05.4 2008-Dec-13 19:09:04 LOG2 antvel: Parameters to Doppler: Topocentric 83344 2008 348 0.0 2008-Dec-13 19:09:04 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Dec-13 19:09:04 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2008-Dec-13 19:09:04 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2008-Dec-13 19:09:04 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Dec-13 19:09:04 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Dec-13 19:09:04 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Dec-13 19:09:04 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-13 19:09:04 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Dec-13 19:09:04 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Dec-13 19:09:04 LOG5 begin_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2008-Dec-13 19:09:04 LOG5 log_alfabeam: Parameters: 23.240916666666664 25.165555555555553 0.234085 2008.9549567774482 18.999933 2008-Dec-13 19:09:04 LOG4 log_alfabeam: ALFABEAM 0 23.240916666666660 25.165555555555525 2008-Dec-13 19:09:04 LOG4 log_alfabeam: ALFABEAM 1 23.248492254530454 25.139364065091875 2008-Dec-13 19:09:04 LOG4 log_alfabeam: ALFABEAM 2 23.245826942559457 25.230496110410375 2008-Dec-13 19:09:04 LOG4 log_alfabeam: ALFABEAM 3 23.238251314856832 25.257037486938216 2008-Dec-13 19:09:04 LOG4 log_alfabeam: ALFABEAM 4 23.233332277576938 25.191439498718712 2008-Dec-13 19:09:04 LOG4 log_alfabeam: ALFABEAM 5 23.236032413605283 25.100038036057967 2008-Dec-13 19:09:04 LOG4 log_alfabeam: ALFABEAM 6 23.243616601642966 25.074504111634223 2008-Dec-13 19:09:04 INFO2 take_data: Starting WAPP+GALFA scan: 834800063 2008-Dec-13 19:09:05 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Dec-13 19:09:05 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Dec-13 19:09:05 LOG5 begin_task: Level: (4) ID = <10200> Status = 0 0 0 0 ok 2008-Dec-13 19:09:05 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Dec-13 19:09:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Dec-13 19:09:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-13 19:09:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:09:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:09:05 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.591 (still bad) 2008-Dec-13 19:09:05 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83346.00 2008-Dec-13 19:09:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Dec-13 19:09:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:09:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:09:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Dec-13 19:09:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:09:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Dec-13 19:09:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Dec-13 19:09:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1990.000000 MHz 2008-Dec-13 19:09:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 2000.000000 MHz 2008-Dec-13 19:09:07 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.584 (still bad) 2008-Dec-13 19:09:09 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.584 (still bad) 2008-Dec-13 19:09:11 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.586 (still bad) 2008-Dec-13 19:09:13 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.585 (still bad) 2008-Dec-13 19:09:15 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.583 (still bad) 2008-Dec-13 19:09:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Dec-13 19:09:16 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Dec-13 19:09:16 LOG5 end_task: Level: (4) ID = <10200> Status = 0 0 0 0 ok 2008-Dec-13 19:09:16 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Dec-13 19:09:16 LOG5 end_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2008-Dec-13 19:09:16 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2008-Dec-13 19:09:16 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2008-Dec-13 19:09:16 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2008-Dec-13 19:09:16 LOG5 antvel: Calling 'antvel 231427.300000 250956.000000 J 0' 2008-Dec-13 19:09:16 LOG2 antvel: Precessing RA = 23:14:27.3 Dec = +25:09:56.0 Epoch = 2008.95496 J 2008-Dec-13 19:09:16 LOG2 antvel: Computed apparent RA = 23:14:54.1 Dec = +25:13:05.4 2008-Dec-13 19:09:16 LOG2 antvel: Parameters to Doppler: Topocentric 83356 2008 348 0.0 2008-Dec-13 19:09:16 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Dec-13 19:09:16 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2008-Dec-13 19:09:16 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2008-Dec-13 19:09:16 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Dec-13 19:09:16 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Dec-13 19:09:16 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Dec-13 19:09:16 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-13 19:09:16 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Dec-13 19:09:16 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Dec-13 19:09:16 LOG5 begin_task: Level: (3) ID = <10201> Status = 0 0 0 0 ok 2008-Dec-13 19:09:16 LOG5 log_alfabeam: Parameters: 23.240916666666664 25.165555555555553 0.237428 2008.9549571577054 18.999933 2008-Dec-13 19:09:16 LOG4 log_alfabeam: ALFABEAM 0 23.240916666666660 25.165555555555553 2008-Dec-13 19:09:16 LOG4 log_alfabeam: ALFABEAM 1 23.248495204310050 25.139521487180296 2008-Dec-13 19:09:16 LOG4 log_alfabeam: ALFABEAM 2 23.245819600075958 25.230598616167679 2008-Dec-13 19:09:16 LOG4 log_alfabeam: ALFABEAM 3 23.238240964454057 25.256981489701097 2008-Dec-13 19:09:16 LOG4 log_alfabeam: ALFABEAM 4 23.233329386653665 25.191282521167597 2008-Dec-13 19:09:16 LOG4 log_alfabeam: ALFABEAM 5 23.236039758028909 25.099937603546298 2008-Dec-13 19:09:16 LOG4 log_alfabeam: ALFABEAM 6 23.243626780064474 25.074559570673866 2008-Dec-13 19:09:16 INFO2 take_data: Starting WAPP+GALFA scan: 834800064 2008-Dec-13 19:09:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Dec-13 19:09:17 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Dec-13 19:09:17 LOG5 begin_task: Level: (4) ID = <10202> Status = 0 0 0 0 ok 2008-Dec-13 19:09:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Dec-13 19:09:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Dec-13 19:09:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-13 19:09:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:09:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:09:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83358.00 2008-Dec-13 19:09:17 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.587 (still bad) 2008-Dec-13 19:09:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Dec-13 19:09:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:09:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:09:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Dec-13 19:09:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:09:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Dec-13 19:09:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Dec-13 19:09:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1990.000000 MHz 2008-Dec-13 19:09:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 2000.000000 MHz 2008-Dec-13 19:09:19 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.581 (still bad) 2008-Dec-13 19:09:21 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.579 (still bad) 2008-Dec-13 19:09:23 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.584 (still bad) 2008-Dec-13 19:09:25 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.578 (still bad) 2008-Dec-13 19:09:27 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.580 (still bad) 2008-Dec-13 19:09:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Dec-13 19:09:28 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Dec-13 19:09:28 LOG5 end_task: Level: (4) ID = <10202> Status = 0 0 0 0 ok 2008-Dec-13 19:09:28 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Dec-13 19:09:28 LOG5 end_task: Level: (3) ID = <10201> Status = 0 0 0 0 ok 2008-Dec-13 19:09:28 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2008-Dec-13 19:09:28 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2008-Dec-13 19:09:28 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2008-Dec-13 19:09:28 LOG5 antvel: Calling 'antvel 231427.300000 250956.000000 J 0' 2008-Dec-13 19:09:28 LOG2 antvel: Precessing RA = 23:14:27.3 Dec = +25:09:56.0 Epoch = 2008.95496 J 2008-Dec-13 19:09:28 LOG2 antvel: Computed apparent RA = 23:14:54.1 Dec = +25:13:05.4 2008-Dec-13 19:09:28 LOG2 antvel: Parameters to Doppler: Topocentric 83368 2008 348 0.0 2008-Dec-13 19:09:28 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Dec-13 19:09:28 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2008-Dec-13 19:09:28 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2008-Dec-13 19:09:28 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Dec-13 19:09:28 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Dec-13 19:09:28 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Dec-13 19:09:28 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-13 19:09:28 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Dec-13 19:09:28 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Dec-13 19:09:28 LOG5 begin_task: Level: (3) ID = <10203> Status = 0 0 0 0 ok 2008-Dec-13 19:09:28 LOG5 log_alfabeam: Parameters: 23.240916666666664 25.165555555555553 0.240770 2008.9549575379624 18.999933 2008-Dec-13 19:09:28 LOG4 log_alfabeam: ALFABEAM 0 23.240916666666660 25.165555555555557 2008-Dec-13 19:09:28 LOG4 log_alfabeam: ALFABEAM 1 23.248498121535558 25.139678171987832 2008-Dec-13 19:09:28 LOG4 log_alfabeam: ALFABEAM 2 23.245812283268005 25.230700450611572 2008-Dec-13 19:09:28 LOG4 log_alfabeam: ALFABEAM 3 23.238230672859270 25.256925562165929 2008-Dec-13 19:09:28 LOG4 log_alfabeam: ALFABEAM 4 23.233326527891435 25.191126280283004 2008-Dec-13 19:09:28 LOG4 log_alfabeam: ALFABEAM 5 23.236047076318240 25.099837830914566 2008-Dec-13 19:09:28 LOG4 log_alfabeam: ALFABEAM 6 23.243636900759871 25.074614956740795 2008-Dec-13 19:09:28 INFO2 take_data: Starting WAPP+GALFA scan: 834800065 2008-Dec-13 19:09:29 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Dec-13 19:09:29 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Dec-13 19:09:29 LOG5 begin_task: Level: (4) ID = <10204> Status = 0 0 0 0 ok 2008-Dec-13 19:09:29 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Dec-13 19:09:29 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Dec-13 19:09:29 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-13 19:09:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:09:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:09:29 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83370.00 2008-Dec-13 19:09:30 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.581 (still bad) 2008-Dec-13 19:09:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Dec-13 19:09:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:09:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:09:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Dec-13 19:09:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:09:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Dec-13 19:09:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Dec-13 19:09:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1990.000000 MHz 2008-Dec-13 19:09:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 2000.000000 MHz 2008-Dec-13 19:09:32 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.586 (still bad) 2008-Dec-13 19:09:34 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.587 (still bad) 2008-Dec-13 19:09:36 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.591 (still bad) 2008-Dec-13 19:09:38 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.587 (still bad) 2008-Dec-13 19:09:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2008-Dec-13 19:09:40 LOG4 check_wapp_levels: WAPP-1 power levels: 1.337 1.331 1.290 1.497 2008-Dec-13 19:09:40 LOG4 check_wapp_levels: WAPP-2 power levels: 1.435 1.377 1.547 1.279 2008-Dec-13 19:09:40 LOG4 check_wapp_levels: WAPP-3 power levels: 1.589 1.335 1.554 1.348 2008-Dec-13 19:09:40 LOG4 check_wapp_levels: WAPP-4 power levels: 1.367 0.104 1.507 0.115 2008-Dec-13 19:09:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Dec-13 19:09:40 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Dec-13 19:09:40 LOG5 end_task: Level: (4) ID = <10204> Status = 0 0 0 0 ok 2008-Dec-13 19:09:40 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Dec-13 19:09:40 LOG5 end_task: Level: (3) ID = <10203> Status = 0 0 0 0 ok 2008-Dec-13 19:09:40 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2008-Dec-13 19:09:40 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2008-Dec-13 19:09:40 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2008-Dec-13 19:09:40 LOG5 antvel: Calling 'antvel 231427.300000 250956.000000 J 0' 2008-Dec-13 19:09:40 LOG2 antvel: Precessing RA = 23:14:27.3 Dec = +25:09:56.0 Epoch = 2008.95496 J 2008-Dec-13 19:09:40 LOG2 antvel: Computed apparent RA = 23:14:54.1 Dec = +25:13:05.4 2008-Dec-13 19:09:40 LOG2 antvel: Parameters to Doppler: Topocentric 83380 2008 348 0.0 2008-Dec-13 19:09:40 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Dec-13 19:09:40 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2008-Dec-13 19:09:40 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2008-Dec-13 19:09:40 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Dec-13 19:09:40 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Dec-13 19:09:40 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Dec-13 19:09:40 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-13 19:09:40 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Dec-13 19:09:40 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Dec-13 19:09:40 LOG5 begin_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2008-Dec-13 19:09:40 LOG5 log_alfabeam: Parameters: 23.240916666666664 25.165555555555553 0.244112 2008.9549579182194 18.999933 2008-Dec-13 19:09:40 LOG4 log_alfabeam: ALFABEAM 0 23.240916666666660 25.165555555555553 2008-Dec-13 19:09:40 LOG4 log_alfabeam: ALFABEAM 1 23.248501007442840 25.139834171065267 2008-Dec-13 19:09:40 LOG4 log_alfabeam: ALFABEAM 2 23.245804989856818 25.230801650057810 2008-Dec-13 19:09:40 LOG4 log_alfabeam: ALFABEAM 3 23.238220436534625 25.256869688775382 2008-Dec-13 19:09:40 LOG4 log_alfabeam: ALFABEAM 4 23.233323700075033 25.190970724632198 2008-Dec-13 19:09:40 LOG4 log_alfabeam: ALFABEAM 5 23.236054370759717 25.099738682532546 2008-Dec-13 19:09:40 LOG4 log_alfabeam: ALFABEAM 6 23.243646967208068 25.074670285312695 2008-Dec-13 19:09:40 INFO2 take_data: Starting WAPP+GALFA scan: 834800066 2008-Dec-13 19:09:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Dec-13 19:09:41 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Dec-13 19:09:41 LOG5 begin_task: Level: (4) ID = <10206> Status = 0 0 0 0 ok 2008-Dec-13 19:09:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Dec-13 19:09:41 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Dec-13 19:09:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-13 19:09:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:09:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:09:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83382.00 2008-Dec-13 19:09:42 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.590 (still bad) 2008-Dec-13 19:09:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Dec-13 19:09:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:09:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:09:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Dec-13 19:09:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:09:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Dec-13 19:09:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Dec-13 19:09:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1990.000000 MHz 2008-Dec-13 19:09:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 2000.000000 MHz 2008-Dec-13 19:09:44 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.595 (still bad) 2008-Dec-13 19:09:46 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.596 (still bad) 2008-Dec-13 19:09:48 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.598 (still bad) 2008-Dec-13 19:09:50 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.595 (still bad) 2008-Dec-13 19:09:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Dec-13 19:09:52 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.598 (still bad) 2008-Dec-13 19:09:52 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Dec-13 19:09:52 LOG5 end_task: Level: (4) ID = <10206> Status = 0 0 0 0 ok 2008-Dec-13 19:09:52 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Dec-13 19:09:52 LOG5 end_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2008-Dec-13 19:09:52 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2008-Dec-13 19:09:52 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2008-Dec-13 19:09:52 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2008-Dec-13 19:09:52 LOG5 antvel: Calling 'antvel 231427.300000 250956.000000 J 0' 2008-Dec-13 19:09:52 LOG2 antvel: Precessing RA = 23:14:27.3 Dec = +25:09:56.0 Epoch = 2008.95496 J 2008-Dec-13 19:09:52 LOG2 antvel: Computed apparent RA = 23:14:54.1 Dec = +25:13:05.4 2008-Dec-13 19:09:52 LOG2 antvel: Parameters to Doppler: Topocentric 83392 2008 348 0.0 2008-Dec-13 19:09:52 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Dec-13 19:09:52 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2008-Dec-13 19:09:52 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2008-Dec-13 19:09:52 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Dec-13 19:09:52 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Dec-13 19:09:52 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Dec-13 19:09:52 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-13 19:09:52 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Dec-13 19:09:52 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Dec-13 19:09:52 LOG5 begin_task: Level: (3) ID = <10207> Status = 0 0 0 0 ok 2008-Dec-13 19:09:52 LOG5 log_alfabeam: Parameters: 23.240916666666664 25.165555555555553 0.247455 2008.9549582984764 18.999933 2008-Dec-13 19:09:52 LOG4 log_alfabeam: ALFABEAM 0 23.240916666666664 25.165555555555542 2008-Dec-13 19:09:52 LOG4 log_alfabeam: ALFABEAM 1 23.248503863225917 25.139989535116218 2008-Dec-13 19:09:52 LOG4 log_alfabeam: ALFABEAM 2 23.245797717591085 25.230902250005631 2008-Dec-13 19:09:52 LOG4 log_alfabeam: ALFABEAM 3 23.238210252012301 25.256813854006609 2008-Dec-13 19:09:52 LOG4 log_alfabeam: ALFABEAM 4 23.233320902030592 25.190815803629672 2008-Dec-13 19:09:52 LOG4 log_alfabeam: ALFABEAM 5 23.236061643611698 25.099640123573685 2008-Dec-13 19:09:52 LOG4 log_alfabeam: ALFABEAM 6 23.243656982819189 25.074725571827514 2008-Dec-13 19:09:52 INFO2 take_data: Starting WAPP+GALFA scan: 834800067 2008-Dec-13 19:09:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Dec-13 19:09:53 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Dec-13 19:09:53 LOG5 begin_task: Level: (4) ID = <10208> Status = 0 0 0 0 ok 2008-Dec-13 19:09:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Dec-13 19:09:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Dec-13 19:09:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-13 19:09:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:09:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:09:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83394.00 2008-Dec-13 19:09:54 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.599 (still bad) 2008-Dec-13 19:09:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Dec-13 19:09:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:09:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:09:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Dec-13 19:09:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:09:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Dec-13 19:09:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Dec-13 19:09:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1990.000000 MHz 2008-Dec-13 19:09:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 2000.000000 MHz 2008-Dec-13 19:09:56 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.605 (still bad) 2008-Dec-13 19:09:58 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.607 (still bad) 2008-Dec-13 19:10:00 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.604 (still bad) 2008-Dec-13 19:10:02 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.605 (still bad) 2008-Dec-13 19:10:04 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Dec-13 19:10:04 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Dec-13 19:10:04 LOG5 end_task: Level: (4) ID = <10208> Status = 0 0 0 0 ok 2008-Dec-13 19:10:04 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Dec-13 19:10:04 LOG5 end_task: Level: (3) ID = <10207> Status = 0 0 0 0 ok 2008-Dec-13 19:10:04 INFO2 smartfreq: Switching off CAL 2008-Dec-13 19:10:04 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Dec-13 19:10:04 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Dec-13 19:10:04 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Dec-13 19:10:04 LOG5 begin_task: Level: (3) ID = <10209> Status = 0 0 0 0 ok 2008-Dec-13 19:10:04 LOG3 CALCONTROL-caltrig: Software trigger 2008-Dec-13 19:10:04 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Dec-13 19:10:04 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Dec-13 19:10:04 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Dec-13 19:10:04 LOG5 end_task: Level: (3) ID = <10209> Status = 0 0 0 0 ok 2008-Dec-13 19:10:04 INFO3 restore_frequencies: Restoring original frequencies 2008-Dec-13 19:10:04 LOG5 antvel: Calling 'antvel 231427.300000 250956.000000 J 0' 2008-Dec-13 19:10:04 LOG2 antvel: Precessing RA = 23:14:27.3 Dec = +25:09:56.0 Epoch = 2008.95496 J 2008-Dec-13 19:10:04 LOG2 antvel: Computed apparent RA = 23:14:54.1 Dec = +25:13:05.4 2008-Dec-13 19:10:04 LOG2 antvel: Parameters to Doppler: Topocentric 83404 2008 348 0.0 2008-Dec-13 19:10:04 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Dec-13 19:10:04 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.2 rest0=1381.2 rest1=1381.2 rest2=1381.2 rest3=1381.2 rest4=1381.2 rest5=1381.2 rest6=1381.2 rest7=1381.2 2008-Dec-13 19:10:04 INFO4 dopset_gen: New sky frequencies: 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 2008-Dec-13 19:10:04 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.200000 sky0=1381.200000 sky1=1381.200000 sky2=1381.200000 sky3=1381.200000 sky4=1381.200000 sky5=1381.200000 sky6=1381.200000 sky7=1381.200000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Dec-13 19:10:04 LOG2 dopset_gen: Result from 'sky2syn': 1631.200000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Dec-13 19:10:04 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2008-Dec-13 19:10:04 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-13 19:10:04 STOP finish_task: Finishing task 'smart frequency switching' 2008-Dec-13 19:10:04 LOG5 finish_task: Level: (2) ID = <10140> Status = 0 0 0 0 ok 2008-Dec-13 19:10:04 DONE finish_task: DONE finished pattern: smart frequency switching 2008-Dec-13 19:10:04 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Dec-13 19:10:04 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2008-Dec-13 19:10:04 LOG5 end_task: Level: (2) ID = <10140> Status = 0 0 0 0 ok 2008-Dec-13 19:10:04 NOTE run_command_file: DONE with command file processing 2008-Dec-13 19:10:05 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2008-Dec-13 19:10:05 STOP finish_task: Finishing task 'running command file 'command_galfacurpos.cmd'' 2008-Dec-13 19:10:05 LOG5 finish_task: Level: (1) ID = <10124> Status = 0 0 0 0 ok 2008-Dec-13 19:10:05 DONE finish_task: DONE finished running: command file 'command_galfacurpos.cmd' 2008-Dec-13 19:10:05 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Dec-13 19:10:05 END end_task: Finishing task 'running command file 'command_galfacurpos.cmd'' with status 'OK' 2008-Dec-13 19:10:05 LOG5 end_task: Level: (1) ID = <10124> Status = 0 0 0 0 ok 2008-Dec-13 19:10:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2008-Dec-13 19:10:05 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.611 (still bad) 2008-Dec-13 19:10:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-13 19:10:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:10:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:10:35 INFO1 CIMA-run_command_file: Transferring command file '081213_obs.cmd ' to executive ... 2008-Dec-13 19:10:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 3 {LOAD ages_config.conf} 2008-Dec-13 19:10:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 4 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5} 2008-Dec-13 19:10:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 5 {CATALOG AGESFull.cat} 2008-Dec-13 19:10:36 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {IF LSTSLEW(AGES7448_p2_143) < 230026 THEN} 2008-Dec-13 19:10:36 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {FIXEDDRIFT az=32.14 alfaangle=-8.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p2_143 ra=225000.00 dec=142600.00} 2008-Dec-13 19:10:36 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 12 {ENDIF} 2008-Dec-13 19:10:36 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 15 {IF LSTSLEW(AGES7448_p2_145) < 232326 THEN} 2008-Dec-13 19:10:36 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 16 {FIXEDDRIFT az=64.86 alfaangle=-39.7 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p2_145 ra=225000.00 dec=142300.00} 2008-Dec-13 19:10:36 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 19 {ENDIF} 2008-Dec-13 19:10:36 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 22 {IF LSTSLEW(AGES7448_p2_147) < 234626 THEN} 2008-Dec-13 19:10:36 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 23 {FIXEDDRIFT az=75.60 alfaangle=-49.7 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p2_147 ra=225000.00 dec=142000.00} 2008-Dec-13 19:10:36 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 26 {ENDIF} 2008-Dec-13 19:10:36 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 29 {IF LSTSLEW(AGES33PP_p1_099) < 005031 THEN} 2008-Dec-13 19:10:36 LOG4 exec_msg: From OBSERVER: store_command_file_line 14 30 {FIXEDDRIFT az=211.36 alfaangle=-11.7 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p1_099 ra=12400.00 dec=301300.00} 2008-Dec-13 19:10:36 LOG4 exec_msg: From OBSERVER: store_command_file_line 15 33 {ENDIF} 2008-Dec-13 19:10:36 LOG4 exec_msg: From OBSERVER: store_command_file_line 16 36 {IF LSTSLEW(AGES33PP_p2_080) < 011331 THEN} 2008-Dec-13 19:10:36 LOG4 exec_msg: From OBSERVER: store_command_file_line 17 37 {FIXEDDRIFT az=190.86 alfaangle=8.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p2_080 ra=12400.00 dec=304130.00} 2008-Dec-13 19:10:36 LOG4 exec_msg: From OBSERVER: store_command_file_line 18 40 {ENDIF} 2008-Dec-13 19:10:36 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-Dec-13 19:10:36 LOG4 exec_msg: From OBSERVER: run_command_file 081213_obs.cmd 1 1 18 2008-Dec-13 19:10:36 LOG4 run_command_file: Calling 'run_command_file 081213_obs.cmd 1 1 18' 2008-Dec-13 19:10:36 BEGIN begin_task: Starting task 'running command file '081213_obs.cmd'' 2008-Dec-13 19:10:36 LOG5 begin_task: Level: (1) ID = <10210> Status = 0 0 0 0 ok 2008-Dec-13 19:10:36 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '081213_obs.cmd' ...} 2008-Dec-13 19:10:36 NOTE run_command_file: Starting execution of command file '081213_obs.cmd' from line 1 2008-Dec-13 19:10:36 COMMAND run_command_line: EXECUTING command 3: 'LOAD ages_config.conf' 2008-Dec-13 19:10:36 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2008-Dec-13 19:10:36 NOTE CIMA-check_config_file: File 'ages_config.conf' contains an ALFA set-up which will be ignored! 2008-Dec-13 19:10:36 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Dec-13 19:10:36 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2008-Dec-13 19:10:36 NOTE CIMA-load_config_file: Loading configuration file 'ages_config.conf' 2008-Dec-13 19:10:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Dec-13 19:10:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Dec-13 19:10:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Dec-13 19:10:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Dec-13 19:10:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Dec-13 19:10:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2008-Dec-13 19:10:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Dec-13 19:10:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786" 2008-Dec-13 19:10:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786" 2008-Dec-13 19:10:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786" 2008-Dec-13 19:10:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786" 2008-Dec-13 19:10:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786" 2008-Dec-13 19:10:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786" 2008-Dec-13 19:10:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786" 2008-Dec-13 19:10:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786" 2008-Dec-13 19:10:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786" 2008-Dec-13 19:10:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Dec-13 19:10:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Dec-13 19:10:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Dec-13 19:10:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Dec-13 19:10:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Dec-13 19:10:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Dec-13 19:10:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Dec-13 19:10:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Dec-13 19:10:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Dec-13 19:10:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Dec-13 19:10:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Dec-13 19:10:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Dec-13 19:10:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Dec-13 19:10:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2008-Dec-13 19:10:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Dec-13 19:10:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Dec-13 19:10:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Dec-13 19:10:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Dec-13 19:10:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Dec-13 19:10:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Dec-13 19:10:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Dec-13 19:10:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Dec-13 19:10:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Dec-13 19:10:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1670.405752" 2008-Dec-13 19:10:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Dec-13 19:10:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Dec-13 19:10:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Dec-13 19:10:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Dec-13 19:10:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Dec-13 19:10:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Dec-13 19:10:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Dec-13 19:10:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Dec-13 19:10:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Dec-13 19:10:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Dec-13 19:10:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Dec-13 19:10:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Dec-13 19:10:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Dec-13 19:10:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Dec-13 19:10:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Dec-13 19:10:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Dec-13 19:10:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Dec-13 19:10:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Dec-13 19:10:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Dec-13 19:10:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Dec-13 19:10:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Dec-13 19:10:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Dec-13 19:10:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Dec-13 19:10:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Dec-13 19:10:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Dec-13 19:10:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Dec-13 19:10:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Dec-13 19:10:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Dec-13 19:10:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Dec-13 19:10:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Dec-13 19:10:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Dec-13 19:10:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Dec-13 19:10:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Dec-13 19:10:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Dec-13 19:10:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Dec-13 19:10:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Dec-13 19:10:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Dec-13 19:10:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Dec-13 19:10:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Dec-13 19:10:38 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Dec-13 19:10:38 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Dec-13 19:10:38 LOG5 begin_task: Level: (2) ID = <10211> Status = 0 0 0 0 ok 2008-Dec-13 19:10:38 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Dec-13 19:10:38 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Dec-13 19:10:38 LOG1 config_iflo: Receiver ALFA already selected 2008-Dec-13 19:10:38 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Dec-13 19:10:38 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Dec-13 19:10:38 START begin_task: Starting task 'waiting on command to ALFA' 2008-Dec-13 19:10:38 LOG5 begin_task: Level: (3) ID = <10212> Status = 0 0 0 0 ok 2008-Dec-13 19:10:38 LOG4 got_alfamon: From ALFAMON: ACK 2008-Dec-13 19:10:38 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Dec-13 19:10:38 LOG5 end_task: Level: (3) ID = <10212> Status = 0 0 0 0 ok 2008-Dec-13 19:10:38 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Dec-13 19:10:38 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Dec-13 19:10:38 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2008-Dec-13 19:10:38 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2008-Dec-13 19:10:38 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Dec-13 19:10:38 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Dec-13 19:10:38 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2008-Dec-13 19:10:38 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2008-Dec-13 19:10:38 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2008-Dec-13 19:10:38 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1670405752.0} 2008-Dec-13 19:10:38 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2008-Dec-13 19:10:38 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2008-Dec-13 19:10:38 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Dec-13 19:10:38 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Dec-13 19:10:38 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Dec-13 19:10:38 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Dec-13 19:10:38 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Dec-13 19:10:38 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2008-Dec-13 19:10:38 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2008-Dec-13 19:10:38 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2008-Dec-13 19:10:38 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2008-Dec-13 19:10:38 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Dec-13 19:10:38 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2008-Dec-13 19:10:38 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2008-Dec-13 19:10:38 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Dec-13 19:10:38 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-13 19:10:38 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2008-Dec-13 19:10:38 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2008-Dec-13 19:10:38 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Dec-13 19:10:38 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2008-Dec-13 19:10:38 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2008-Dec-13 19:10:38 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Dec-13 19:10:38 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Dec-13 19:10:38 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Dec-13 19:10:38 LOG5 begin_task: Level: (3) ID = <10213> Status = 0 0 0 0 ok 2008-Dec-13 19:10:38 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1670405752.0} 2008-Dec-13 19:10:38 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Dec-13 19:10:38 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-13 19:10:38 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Dec-13 19:10:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:10:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:10:39 LOG4 got_cormsg: From DATATAKING: vw% DONE 2008-Dec-13 19:10:39 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Dec-13 19:10:39 LOG5 end_task: Level: (3) ID = <10213> Status = 0 0 0 0 ok 2008-Dec-13 19:10:39 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Dec-13 19:10:39 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Dec-13 19:10:39 LOG5 finish_task: Level: (2) ID = <10211> Status = 0 0 0 0 ok 2008-Dec-13 19:10:39 DONE finish_task: DONE finished configuration: IF/LO path 2008-Dec-13 19:10:39 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Dec-13 19:10:39 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Dec-13 19:10:39 LOG5 end_task: Level: (2) ID = <10211> Status = 0 0 0 0 ok 2008-Dec-13 19:10:39 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Dec-13 19:10:39 LOG5 begin_task: Level: (2) ID = <10214> Status = 0 0 0 0 ok 2008-Dec-13 19:10:39 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Dec-13 19:10:39 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Dec-13 19:10:39 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2008-Dec-13 19:10:39 START begin_task: Starting task 'selecting calibration port' 2008-Dec-13 19:10:39 LOG5 begin_task: Level: (3) ID = <10215> Status = 0 0 0 0 ok 2008-Dec-13 19:10:39 LOG3 vw_send: To DATATAKING: calport 3 2008-Dec-13 19:10:39 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Dec-13 19:10:39 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Dec-13 19:10:39 START begin_task: Starting task 'waiting on calport' 2008-Dec-13 19:10:39 LOG5 begin_task: Level: (4) ID = <10216> Status = 0 0 0 0 ok 2008-Dec-13 19:10:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:10:39 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Dec-13 19:10:39 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Dec-13 19:10:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:10:39 LOG4 got_cormsg: From DATATAKING: DONE 2008-Dec-13 19:10:39 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Dec-13 19:10:39 LOG5 end_task: Level: (4) ID = <10216> Status = 0 0 0 0 ok 2008-Dec-13 19:10:39 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Dec-13 19:10:39 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Dec-13 19:10:39 LOG5 end_task: Level: (3) ID = <10215> Status = 0 0 0 0 ok 2008-Dec-13 19:10:39 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Dec-13 19:10:39 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Dec-13 19:10:39 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Dec-13 19:10:39 LOG5 begin_task: Level: (3) ID = <10217> Status = 0 0 0 0 ok 2008-Dec-13 19:10:39 LOG3 CALCONTROL-caltrig: Software trigger 2008-Dec-13 19:10:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:10:39 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Dec-13 19:10:39 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Dec-13 19:10:39 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Dec-13 19:10:39 LOG5 end_task: Level: (3) ID = <10217> Status = 0 0 0 0 ok 2008-Dec-13 19:10:40 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Dec-13 19:10:40 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Dec-13 19:10:40 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Dec-13 19:10:40 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Dec-13 19:10:40 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Dec-13 19:10:40 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Dec-13 19:10:40 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Dec-13 19:10:40 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Dec-13 19:10:40 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Matthew Smith 2008-Dec-13 19:10:40 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Matthew Smith 2008-Dec-13 19:10:40 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Matthew Smith 2008-Dec-13 19:10:40 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Matthew Smith 2008-Dec-13 19:10:40 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Dec-13 19:10:40 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Dec-13 19:10:40 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Dec-13 19:10:40 LOG5 begin_task: Level: (3) ID = <10218> Status = 0 0 0 0 ok 2008-Dec-13 19:10:40 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Dec-13 19:10:40 LOG3 CALCONTROL-caltrig: Software trigger 2008-Dec-13 19:10:40 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Dec-13 19:10:40 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Dec-13 19:10:40 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Matthew Smith' 2008-Dec-13 19:10:40 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Dec-13 19:10:40 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Dec-13 19:10:40 LOG5 end_task: Level: (3) ID = <10218> Status = 0 0 0 0 ok 2008-Dec-13 19:10:40 LOG3 sock_errsend: To WAPPDATA: FLUSH 2008-Dec-13 19:10:40 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Dec-13 19:10:40 LOG5 finish_task: Level: (2) ID = <10214> Status = 0 0 0 0 ok 2008-Dec-13 19:10:40 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Dec-13 19:10:40 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Dec-13 19:10:40 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Dec-13 19:10:40 LOG5 end_task: Level: (2) ID = <10214> Status = 0 0 0 0 ok 2008-Dec-13 19:10:40 COMMAND run_command_line: EXECUTING command 4: 'SETUP FIXEDDRIFT calwhen=tracking calsecs=5' 2008-Dec-13 19:10:40 COMMAND run_command_line: EXECUTING command 5: 'CATALOG AGESFull.cat' 2008-Dec-13 19:10:40 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2008-Dec-13 19:10:40 COMMAND run_command_line: EXECUTING command 8: 'IF LSTSLEW(AGES7448_p2_143) < 230026 THEN' 2008-Dec-13 19:10:41 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES7448_p2_143) < 230026 2008-Dec-13 19:10:41 INFO5 is_if_valid: Condition parsed as: 24.288879333333334 < 23.007222222222222 2008-Dec-13 19:10:41 INFO1 is_if_valid: Skipping line 'IF LSTSLEW(AGES7448_p2_143) < 230026 THEN' 2008-Dec-13 19:10:41 COMMAND run_command_line: EXECUTING command 9: 'FIXEDDRIFT az=32.14 alfaangle=-8.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p2_143 ra=225000.00 dec=142600.00' 2008-Dec-13 19:10:41 INFO1 run_command_line: Skipping line 'FIXEDDRIFT az=32.14 alfaangle=-8.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p2_143 ra=225000.00 dec=142600.00' in non-true conditional branch 2008-Dec-13 19:10:41 COMMAND run_command_line: EXECUTING command 12: 'ENDIF' 2008-Dec-13 19:10:41 COMMAND run_command_line: EXECUTING command 15: 'IF LSTSLEW(AGES7448_p2_145) < 232326 THEN' 2008-Dec-13 19:10:41 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES7448_p2_145) < 232326 2008-Dec-13 19:10:41 INFO5 is_if_valid: Condition parsed as: 24.288879333333334 < 23.390555555555554 2008-Dec-13 19:10:41 INFO1 is_if_valid: Skipping line 'IF LSTSLEW(AGES7448_p2_145) < 232326 THEN' 2008-Dec-13 19:10:42 COMMAND run_command_line: EXECUTING command 16: 'FIXEDDRIFT az=64.86 alfaangle=-39.7 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p2_145 ra=225000.00 dec=142300.00' 2008-Dec-13 19:10:42 INFO1 run_command_line: Skipping line 'FIXEDDRIFT az=64.86 alfaangle=-39.7 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p2_145 ra=225000.00 dec=142300.00' in non-true conditional branch 2008-Dec-13 19:10:42 COMMAND run_command_line: EXECUTING command 19: 'ENDIF' 2008-Dec-13 19:10:42 COMMAND run_command_line: EXECUTING command 22: 'IF LSTSLEW(AGES7448_p2_147) < 234626 THEN' 2008-Dec-13 19:10:42 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES7448_p2_147) < 234626 2008-Dec-13 19:10:42 INFO5 is_if_valid: Condition parsed as: 24.288879333333334 < 23.773888888888887 2008-Dec-13 19:10:42 INFO1 is_if_valid: Skipping line 'IF LSTSLEW(AGES7448_p2_147) < 234626 THEN' 2008-Dec-13 19:10:42 COMMAND run_command_line: EXECUTING command 23: 'FIXEDDRIFT az=75.60 alfaangle=-49.7 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p2_147 ra=225000.00 dec=142000.00' 2008-Dec-13 19:10:42 INFO1 run_command_line: Skipping line 'FIXEDDRIFT az=75.60 alfaangle=-49.7 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p2_147 ra=225000.00 dec=142000.00' in non-true conditional branch 2008-Dec-13 19:10:42 COMMAND run_command_line: EXECUTING command 26: 'ENDIF' 2008-Dec-13 19:10:42 COMMAND run_command_line: EXECUTING command 29: 'IF LSTSLEW(AGES33PP_p1_099) < 005031 THEN' 2008-Dec-13 19:10:43 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES33PP_p1_099) < 005031 2008-Dec-13 19:10:43 INFO5 is_if_valid: Condition parsed as: 0.33721266666666666 < 0.8419444444444445 2008-Dec-13 19:10:43 COMMAND run_command_line: EXECUTING command 30: 'FIXEDDRIFT az=211.36 alfaangle=-11.7 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p1_099 ra=12400.00 dec=301300.00' 2008-Dec-13 19:10:43 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Dec-13 19:10:43 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Dec-13 19:10:43 WARNING check_obsmode: WARNING failed to get a response from the CIMA frontend when checking options for 'fixed azimuth drift map'! 2008-Dec-13 19:10:43 NOTE check_obsmode: Assuming that the options are OK 2008-Dec-13 19:10:43 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 211.36 -11.7 hcorcal 5 tracking no first 1 AGES33PP_p1_099 12400.00 301300.00 J 8500.0 Heliocentric velocity(optical)' 2008-Dec-13 19:10:43 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Dec-13 19:10:43 LOG5 begin_task: Level: (2) ID = <10219> Status = 0 0 0 0 ok 2008-Dec-13 19:10:43 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'Cur-pos' 2008-Dec-13 19:10:43 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Dec-13 19:10:43 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES33PP_p1_099} 2008-Dec-13 19:10:43 INFO3 fixed_driftmap: Sending telescope to Az = 211.36 and ZA = 14.20 2008-Dec-13 19:10:43 LOG3 track_source: Calling 'track_source AGES33PP_p1_099 211.36 14.1971423769 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Dec-13 19:10:43 START begin_task: Starting task 'sending tracking commands' 2008-Dec-13 19:10:43 LOG5 begin_task: Level: (3) ID = <10220> Status = 0 0 0 0 ok 2008-Dec-13 19:10:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES33PP_p1_099} INFO {Slewing to source 'AGES33PP_p1_099' ...} 2008-Dec-13 19:10:43 INFO1 track_source: Starting to track AGES33PP_p1_099 2008-Dec-13 19:10:43 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES33PP_p1_099" 2008-Dec-13 19:10:43 LOG3 vw_send: To DATATAKING: set ra 211.36 2008-Dec-13 19:10:43 LOG3 vw_send: To DATATAKING: set dec 14.1971423769 2008-Dec-13 19:10:44 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Dec-13 19:10:44 LOG3 vw_send: To DATATAKING: pnt tr 211.36 14.1971423769 -CF 2008-Dec-13 19:10:44 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Dec-13 19:10:44 STOP finish_task: Finishing task 'sending tracking commands' 2008-Dec-13 19:10:44 LOG5 finish_task: Level: (3) ID = <10220> Status = 0 0 0 0 ok 2008-Dec-13 19:10:44 INFO2 finish_task: DONE finished sending: tracking commands 2008-Dec-13 19:10:44 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-13 19:10:44 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Dec-13 19:10:44 LOG5 end_task: Level: (3) ID = <10220> Status = 0 0 0 0 ok 2008-Dec-13 19:10:44 START begin_task: Starting task 'rotate ALFA to -11.7 degrees' 2008-Dec-13 19:10:44 LOG5 begin_task: Level: (3) ID = <10221> Status = 0 0 0 0 ok 2008-Dec-13 19:10:44 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -11.7 degrees ...} 2008-Dec-13 19:10:44 INFO2 rotate_alfa: ALFA commanded to -11.7 degrees 2008-Dec-13 19:10:44 LOG3 sock_errsend: To ALFAMOTOR: POSITION -11.7 REPLY 2008-Dec-13 19:10:44 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Dec-13 19:10:44 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Dec-13 19:10:44 LOG5 begin_task: Level: (4) ID = <10222> Status = 0 0 0 0 ok 2008-Dec-13 19:10:44 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Dec-13 19:10:44 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES33PP_p1_099" 2008-Dec-13 19:10:44 LOG4 got_cormsg: From DATATAKING: set ra 211.36 2008-Dec-13 19:10:44 LOG4 got_cormsg: From DATATAKING: set dec 14.1971423769 2008-Dec-13 19:10:44 LOG4 got_cormsg: From DATATAKING: vw% 211.36 2008-Dec-13 19:10:44 LOG4 got_cormsg: From DATATAKING: vw% 14.1971423769 2008-Dec-13 19:10:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:10:44 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Dec-13 19:10:44 LOG4 got_cormsg: From DATATAKING: pnt tr 211.36 14.1971423769 -CF 2008-Dec-13 19:10:44 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Dec-13 19:10:44 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Dec-13 19:10:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:11:02 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Dec-13 19:11:02 INFO3 alfa_motor: ALFA rotator in-position -11.70 degrees 2008-Dec-13 19:11:02 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Dec-13 19:11:02 LOG5 end_task: Level: (4) ID = <10222> Status = 0 0 0 0 ok 2008-Dec-13 19:11:02 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Dec-13 19:11:02 STOP finish_task: Finishing task 'rotate ALFA to -11.7 degrees' 2008-Dec-13 19:11:02 LOG5 finish_task: Level: (3) ID = <10221> Status = 0 0 0 0 ok 2008-Dec-13 19:11:02 INFO2 finish_task: DONE finished configuration: rotating ALFA to -11.7 degrees 2008-Dec-13 19:11:02 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-13 19:11:02 STOP end_task: Finishing task 'rotate ALFA to -11.7 degrees' with status 'OK' 2008-Dec-13 19:11:02 LOG5 end_task: Level: (3) ID = <10221> Status = 0 0 0 0 ok 2008-Dec-13 19:11:02 START begin_task: Starting task 'waiting on telescope' 2008-Dec-13 19:11:02 LOG5 begin_task: Level: (3) ID = <10223> Status = 0 0 0 0 ok 2008-Dec-13 19:11:02 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Dec-13 19:11:02 LOG3 waittrk: Start waittrk 5 2008-Dec-13 19:11:02 START begin_task: Starting task 'waiting on telescope movement' 2008-Dec-13 19:11:02 LOG5 begin_task: Level: (4) ID = <10224> Status = 0 0 0 0 ok 2008-Dec-13 19:11:07 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Dec-13 19:11:07 LOG5 end_task: Level: (4) ID = <10224> Status = 0 0 0 0 ok 2008-Dec-13 19:11:07 START begin_task: Starting task 'waiting on telescope on source' 2008-Dec-13 19:11:07 LOG5 begin_task: Level: (4) ID = <10225> Status = 0 0 0 0 ok 2008-Dec-13 19:14:42 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Dec-13 19:14:42 LOG5 end_task: Level: (4) ID = <10225> Status = 0 0 0 0 ok 2008-Dec-13 19:14:42 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Dec-13 19:14:42 INFO2 waittrk: Now tracking AGES33PP_p1_099 2008-Dec-13 19:14:42 LOG4 waittrk: Current telescope position: Az = 570.98 ZA = 14.23 2008-Dec-13 19:14:42 STOP finish_task: Finishing task 'waiting on telescope' 2008-Dec-13 19:14:42 LOG5 finish_task: Level: (3) ID = <10223> Status = 0 0 0 0 ok 2008-Dec-13 19:14:42 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Dec-13 19:14:42 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-13 19:14:42 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Dec-13 19:14:42 LOG5 end_task: Level: (3) ID = <10223> Status = 0 0 0 0 ok 2008-Dec-13 19:14:42 START begin_task: Starting task 'selecting calibration type' 2008-Dec-13 19:14:42 LOG5 begin_task: Level: (3) ID = <10226> Status = 0 0 0 0 ok 2008-Dec-13 19:14:43 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Dec-13 19:14:43 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Dec-13 19:14:43 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Dec-13 19:14:43 START begin_task: Starting task 'waiting on setcal' 2008-Dec-13 19:14:43 LOG5 begin_task: Level: (4) ID = <10227> Status = 0 0 0 0 ok 2008-Dec-13 19:14:43 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Dec-13 19:14:43 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Dec-13 19:14:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:14:43 LOG4 got_cormsg: From DATATAKING: DONE 2008-Dec-13 19:14:43 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Dec-13 19:14:43 LOG5 end_task: Level: (4) ID = <10227> Status = 0 0 0 0 ok 2008-Dec-13 19:14:43 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Dec-13 19:14:43 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Dec-13 19:14:43 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Dec-13 19:14:43 START begin_task: Starting task 'waiting on command to ALFA' 2008-Dec-13 19:14:43 LOG5 begin_task: Level: (4) ID = <10228> Status = 0 0 0 0 ok 2008-Dec-13 19:14:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:14:43 LOG4 got_alfamon: From ALFAMON: ACK 2008-Dec-13 19:14:43 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Dec-13 19:14:43 LOG5 end_task: Level: (4) ID = <10228> Status = 0 0 0 0 ok 2008-Dec-13 19:14:43 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Dec-13 19:14:43 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Dec-13 19:14:43 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Dec-13 19:14:43 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Dec-13 19:14:43 START begin_task: Starting task 'waiting on command to ALFA' 2008-Dec-13 19:14:43 LOG5 begin_task: Level: (4) ID = <10229> Status = 0 0 0 0 ok 2008-Dec-13 19:14:43 LOG4 got_alfamon: From ALFAMON: ACK 2008-Dec-13 19:14:43 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Dec-13 19:14:43 LOG5 end_task: Level: (4) ID = <10229> Status = 0 0 0 0 ok 2008-Dec-13 19:14:43 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Dec-13 19:14:43 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Dec-13 19:14:43 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Dec-13 19:14:43 LOG5 end_task: Level: (3) ID = <10226> Status = 0 0 0 0 ok 2008-Dec-13 19:14:43 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2008-Dec-13 19:14:43 INFO2 astwait: Waiting for 1784 seconds from 23:14:43 to 23:44:27 UTC ... 2008-Dec-13 19:14:43 LOG4 send_obs_status: To obs_status: <1> TASKTIME 1784 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Dec-13 19:14:43 START begin_task: Starting task 'waiting on waiting for AST time' 2008-Dec-13 19:14:43 LOG5 begin_task: Level: (3) ID = <10230> Status = 0 0 0 0 ok 2008-Dec-13 19:44:27 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2008-Dec-13 19:44:27 LOG5 end_task: Level: (3) ID = <10230> Status = 0 0 0 0 ok 2008-Dec-13 19:44:27 INFO3 astwait: Finished waiting 2008-Dec-13 19:44:27 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Dec-13 19:44:27 LOG5 dopset_later: Calling 'dopset_later 61.101215080501476' 2008-Dec-13 19:44:27 INFO3 dopset_later: Setting Doppler correction for 19:45:27 (61.1 seconds from now) 2008-Dec-13 19:44:27 LOG5 antvel: Calling 'antvel 211.360000 14.197142 F 61.101215080501476' 2008-Dec-13 19:44:27 LOG2 antvel: Transforming current Az = 211.36 ZA = 14.20 to apparent RA = 01:24:31.2 Dec = +30:16:04.3 2008-Dec-13 19:44:27 LOG2 antvel: Parameters to Doppler: Heliocentric 85527 2008 348 0.0 2008-Dec-13 19:44:27 INFO5 antvel: Computed antenna velocity: +22.23809 km/s 2008-Dec-13 19:44:27 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=22.238093386300001 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Dec-13 19:44:27 INFO4 dopset_gen: New sky frequencies: 1381.140978 1381.140978 1381.140978 1381.140978 1381.140978 1381.140978 1381.140978 1381.140978 1381.140978 2008-Dec-13 19:44:27 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.140978 sky0=1381.140978 sky1=1381.140978 sky2=1381.140978 sky3=1381.140978 sky4=1381.140978 sky5=1381.140978 sky6=1381.140978 sky7=1381.140978 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Dec-13 19:44:27 LOG2 dopset_gen: Result from 'sky2syn': 1631.140978 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Dec-13 19:44:27 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631140978.0} 2008-Dec-13 19:44:27 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-13 19:44:27 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Dec-13 19:44:27 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Dec-13 19:44:27 INFO5 fixed_driftmap: Tracking J2000 position: RA = 01:23:03.1 Dec = +30:13:16.5 2008-Dec-13 19:44:27 LOG3 track_source: Calling 'track_source AGES33PP_p1_099 012303.1 301316.5 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Dec-13 19:44:27 START begin_task: Starting task 'sending tracking commands' 2008-Dec-13 19:44:27 LOG5 begin_task: Level: (3) ID = <10231> Status = 0 0 0 0 ok 2008-Dec-13 19:44:27 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES33PP_p1_099} INFO {Slewing to source 'AGES33PP_p1_099' ...} 2008-Dec-13 19:44:27 INFO1 track_source: Starting to track AGES33PP_p1_099 2008-Dec-13 19:44:27 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES33PP_p1_099" 2008-Dec-13 19:44:27 LOG3 vw_send: To DATATAKING: set ra 012303.1 2008-Dec-13 19:44:27 LOG3 vw_send: To DATATAKING: set dec 301316.5 2008-Dec-13 19:44:27 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Dec-13 19:44:27 LOG3 vw_send: To DATATAKING: pnt tr 012303.1 301316.5 -CJ 2008-Dec-13 19:44:27 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Dec-13 19:44:27 STOP finish_task: Finishing task 'sending tracking commands' 2008-Dec-13 19:44:27 LOG5 finish_task: Level: (3) ID = <10231> Status = 0 0 0 0 ok 2008-Dec-13 19:44:27 INFO2 finish_task: DONE finished sending: tracking commands 2008-Dec-13 19:44:27 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-13 19:44:27 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Dec-13 19:44:27 LOG5 end_task: Level: (3) ID = <10231> Status = 0 0 0 0 ok 2008-Dec-13 19:44:27 START begin_task: Starting task 'waiting on telescope' 2008-Dec-13 19:44:27 LOG5 begin_task: Level: (3) ID = <10232> Status = 0 0 0 0 ok 2008-Dec-13 19:44:27 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Dec-13 19:44:27 LOG3 waittrk: Start waittrk 5 2008-Dec-13 19:44:27 START begin_task: Starting task 'waiting on telescope movement' 2008-Dec-13 19:44:27 LOG5 begin_task: Level: (4) ID = <10233> Status = 0 0 0 0 ok 2008-Dec-13 19:44:27 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631140978.0} 2008-Dec-13 19:44:27 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-13 19:44:27 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES33PP_p1_099" 2008-Dec-13 19:44:27 LOG4 got_cormsg: From DATATAKING: set ra 012303.1 2008-Dec-13 19:44:27 LOG4 got_cormsg: From DATATAKING: set dec 301316.5 2008-Dec-13 19:44:27 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Dec-13 19:44:27 LOG4 got_cormsg: From DATATAKING: pnt tr 012303.1 301316.5 -CJ 2008-Dec-13 19:44:27 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Dec-13 19:44:28 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:44:28 LOG4 got_cormsg: From DATATAKING: vw% vw% 012303.1 2008-Dec-13 19:44:28 LOG4 got_cormsg: From DATATAKING: vw% 301316.5 2008-Dec-13 19:44:28 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2008-Dec-13 19:44:32 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Dec-13 19:44:32 LOG5 end_task: Level: (4) ID = <10233> Status = 0 0 0 0 ok 2008-Dec-13 19:44:32 START begin_task: Starting task 'waiting on telescope on source' 2008-Dec-13 19:44:32 LOG5 begin_task: Level: (4) ID = <10234> Status = 0 0 0 0 ok 2008-Dec-13 19:44:35 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Dec-13 19:44:35 LOG5 end_task: Level: (4) ID = <10234> Status = 0 0 0 0 ok 2008-Dec-13 19:44:35 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Dec-13 19:44:35 INFO2 waittrk: Now tracking AGES33PP_p1_099 2008-Dec-13 19:44:35 LOG4 waittrk: Current telescope position: Az = 570.91 ZA = 14.22 2008-Dec-13 19:44:35 STOP finish_task: Finishing task 'waiting on telescope' 2008-Dec-13 19:44:35 LOG5 finish_task: Level: (3) ID = <10232> Status = 0 0 0 0 ok 2008-Dec-13 19:44:35 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Dec-13 19:44:35 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-13 19:44:35 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Dec-13 19:44:35 LOG5 end_task: Level: (3) ID = <10232> Status = 0 0 0 0 ok 2008-Dec-13 19:44:35 START begin_task: Starting task 'adjusting WAPP power' 2008-Dec-13 19:44:35 LOG5 begin_task: Level: (3) ID = <10235> Status = 0 0 0 0 ok 2008-Dec-13 19:44:35 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Dec-13 19:44:35 INFO2 adjust_power: Starting to adjust WAPP power 2008-Dec-13 19:44:35 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Dec-13 19:44:36 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Dec-13 19:44:36 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Dec-13 19:44:36 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Dec-13 19:44:36 LOG5 begin_task: Level: (4) ID = <10236> Status = 0 0 0 0 ok 2008-Dec-13 19:44:36 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Dec-13 19:44:36 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Dec-13 19:44:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:44:39 LOG4 got_cormsg: From DATATAKING: DONE 2008-Dec-13 19:44:39 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Dec-13 19:44:39 LOG5 end_task: Level: (4) ID = <10236> Status = 0 0 0 0 ok 2008-Dec-13 19:44:39 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Dec-13 19:44:39 START begin_task: Starting task 'adjusting WAPP power' 2008-Dec-13 19:44:39 LOG5 begin_task: Level: (4) ID = <10237> Status = 0 0 0 0 ok 2008-Dec-13 19:44:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Dec-13 19:44:39 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Dec-13 19:44:39 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Dec-13 19:44:39 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Dec-13 19:44:39 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Dec-13 19:44:40 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Dec-13 19:44:40 LOG5 begin_task: Level: (5) ID = <10238> Status = 0 0 0 0 ok 2008-Dec-13 19:44:40 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Dec-13 19:44:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:44:40 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 7 6 dB 2008-Dec-13 19:44:40 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 1 dB --- beam 5: 6 5 dB 2008-Dec-13 19:44:40 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Dec-13 19:44:40 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2008-Dec-13 19:44:40 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Dec-13 19:44:40 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Dec-13 19:44:40 LOG5 end_task: Level: (5) ID = <10238> Status = 0 0 0 0 ok 2008-Dec-13 19:44:40 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.992 0.996 ALFA beam 1: 0.977 1.117 2008-Dec-13 19:44:40 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.060 0.998 ALFA beam 3: 0.896 0.933 2008-Dec-13 19:44:40 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.925 0.960 ALFA beam 5: 0.904 1.039 2008-Dec-13 19:44:40 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.048 0.106 ALFA beam 7: 0.923 0.117 2008-Dec-13 19:44:40 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Dec-13 19:44:40 LOG5 finish_task: Level: (4) ID = <10237> Status = 0 0 0 0 ok 2008-Dec-13 19:44:40 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Dec-13 19:44:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-13 19:44:40 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Dec-13 19:44:40 LOG5 end_task: Level: (4) ID = <10237> Status = 0 0 0 0 ok 2008-Dec-13 19:44:40 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Dec-13 19:44:40 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Dec-13 19:44:40 LOG5 finish_task: Level: (3) ID = <10235> Status = 0 0 0 0 ok 2008-Dec-13 19:44:40 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Dec-13 19:44:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-13 19:44:40 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Dec-13 19:44:40 LOG5 end_task: Level: (3) ID = <10235> Status = 0 0 0 0 ok 2008-Dec-13 19:44:40 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Matthew Smith 2008-Dec-13 19:44:40 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Matthew Smith 2008-Dec-13 19:44:40 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Matthew Smith 2008-Dec-13 19:44:40 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Matthew Smith 2008-Dec-13 19:44:40 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Dec-13 19:44:40 START begin_task: Starting task 'WAPP calibration' 2008-Dec-13 19:44:40 LOG5 begin_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2008-Dec-13 19:44:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Dec-13 19:44:40 START begin_task: Starting task 'selecting calibration type' 2008-Dec-13 19:44:40 LOG5 begin_task: Level: (4) ID = <10240> Status = 0 0 0 0 ok 2008-Dec-13 19:44:40 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Dec-13 19:44:40 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Dec-13 19:44:40 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Dec-13 19:44:40 START begin_task: Starting task 'waiting on setcal' 2008-Dec-13 19:44:40 LOG5 begin_task: Level: (5) ID = <10241> Status = 0 0 0 0 ok 2008-Dec-13 19:44:40 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Matthew Smith' 2008-Dec-13 19:44:41 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Dec-13 19:44:41 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Dec-13 19:44:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:44:41 LOG4 got_cormsg: From DATATAKING: DONE 2008-Dec-13 19:44:41 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Dec-13 19:44:41 LOG5 end_task: Level: (5) ID = <10241> Status = 0 0 0 0 ok 2008-Dec-13 19:44:41 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Dec-13 19:44:41 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Dec-13 19:44:41 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Dec-13 19:44:41 START begin_task: Starting task 'waiting on command to ALFA' 2008-Dec-13 19:44:41 LOG5 begin_task: Level: (5) ID = <10242> Status = 0 0 0 0 ok 2008-Dec-13 19:44:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:44:41 NOTE WAPPDATA-new_file: New FITS file: wapp.20081213.a2048.0004.fits 2008-Dec-13 19:44:41 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081213.a2048.0004.fits} 2008-Dec-13 19:44:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2008-Dec-13 19:44:42 LOG4 check_wapp_levels: WAPP-1 power levels: 0.992 0.996 0.977 1.117 2008-Dec-13 19:44:42 LOG4 check_wapp_levels: WAPP-2 power levels: 1.060 0.998 0.896 0.933 2008-Dec-13 19:44:42 LOG4 check_wapp_levels: WAPP-3 power levels: 0.925 0.960 0.904 1.039 2008-Dec-13 19:44:42 LOG4 check_wapp_levels: WAPP-4 power levels: 1.048 0.106 0.923 0.117 2008-Dec-13 19:44:42 LOG4 got_alfamon: From ALFAMON: ACK 2008-Dec-13 19:44:42 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Dec-13 19:44:42 LOG5 end_task: Level: (5) ID = <10242> Status = 0 0 0 0 ok 2008-Dec-13 19:44:42 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Dec-13 19:44:42 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Dec-13 19:44:42 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Dec-13 19:44:42 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Dec-13 19:44:42 START begin_task: Starting task 'waiting on command to ALFA' 2008-Dec-13 19:44:42 LOG5 begin_task: Level: (5) ID = <10243> Status = 0 0 0 0 ok 2008-Dec-13 19:44:42 LOG4 got_alfamon: From ALFAMON: ACK 2008-Dec-13 19:44:42 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Dec-13 19:44:42 LOG5 end_task: Level: (5) ID = <10243> Status = 0 0 0 0 ok 2008-Dec-13 19:44:42 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Dec-13 19:44:42 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Dec-13 19:44:42 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Dec-13 19:44:42 LOG5 end_task: Level: (4) ID = <10240> Status = 0 0 0 0 ok 2008-Dec-13 19:44:42 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Dec-13 19:44:42 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Dec-13 19:44:42 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Dec-13 19:44:42 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Dec-13 19:44:42 LOG5 begin_task: Level: (4) ID = <10244> Status = 0 0 0 0 ok 2008-Dec-13 19:44:42 LOG3 CALCONTROL-caltrig: Software trigger 2008-Dec-13 19:44:42 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Dec-13 19:44:42 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Dec-13 19:44:42 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Dec-13 19:44:42 LOG5 end_task: Level: (4) ID = <10244> Status = 0 0 0 0 ok 2008-Dec-13 19:44:42 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Dec-13 19:44:42 LOG4 take_data: Calling 'take_data 5 5 CAL ON -' 2008-Dec-13 19:44:42 START begin_task: Starting task 'WAPP spectral observation' 2008-Dec-13 19:44:42 LOG5 begin_task: Level: (4) ID = <10245> Status = 0 0 0 0 ok 2008-Dec-13 19:44:42 LOG5 log_alfabeam: Parameters: 1.3841944444444445 30.221249999999998 0.829600 2008.95502452658 -11.700080 2008-Dec-13 19:44:42 LOG4 log_alfabeam: ALFABEAM 0 1.384194444444440 30.221250000000001 2008-Dec-13 19:44:42 LOG4 log_alfabeam: ALFABEAM 1 1.384528596038938 30.121244430374674 2008-Dec-13 19:44:42 LOG4 log_alfabeam: ALFABEAM 2 1.390816767116939 30.187764848469577 2008-Dec-13 19:44:42 LOG4 log_alfabeam: ALFABEAM 3 1.390477171005800 30.288026139611642 2008-Dec-13 19:44:42 LOG4 log_alfabeam: ALFABEAM 4 1.383805860589723 30.321426144346006 2008-Dec-13 19:44:42 LOG4 log_alfabeam: ALFABEAM 5 1.377560324507845 30.254052413880920 2008-Dec-13 19:44:42 LOG4 log_alfabeam: ALFABEAM 6 1.377943243421658 30.154131300084103 2008-Dec-13 19:44:42 INFO2 take_data: Starting WAPP scan: 834800068 2008-Dec-13 19:44:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Dec-13 19:44:43 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Dec-13 19:44:43 LOG5 begin_task: Level: (5) ID = <10246> Status = 0 0 0 0 ok 2008-Dec-13 19:44:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Dec-13 19:44:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85484.00 2008-Dec-13 19:44:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.140978 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Dec-13 19:44:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.140978 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:44:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.140978 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:44:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.140978 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Dec-13 19:44:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.140978 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:44:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2008-Dec-13 19:44:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.140978 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Dec-13 19:44:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.140978 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Dec-13 19:44:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.140978 MHz Flip = 1 Band = 0 Mixer = 1990.000000 MHz 2008-Dec-13 19:44:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.140978 MHz Flip = 1 Band = 0 Mixer = 2000.000000 MHz 2008-Dec-13 19:44:49 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Dec-13 19:44:49 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Dec-13 19:44:49 LOG5 end_task: Level: (5) ID = <10246> Status = 0 0 0 0 ok 2008-Dec-13 19:44:49 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Dec-13 19:44:49 LOG5 end_task: Level: (4) ID = <10245> Status = 0 0 0 0 ok 2008-Dec-13 19:44:49 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Dec-13 19:44:49 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Dec-13 19:44:49 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Dec-13 19:44:49 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Dec-13 19:44:49 LOG5 begin_task: Level: (4) ID = <10247> Status = 0 0 0 0 ok 2008-Dec-13 19:44:50 LOG3 CALCONTROL-caltrig: Software trigger 2008-Dec-13 19:44:50 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Dec-13 19:44:50 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Dec-13 19:44:50 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Dec-13 19:44:50 LOG5 end_task: Level: (4) ID = <10247> Status = 0 0 0 0 ok 2008-Dec-13 19:44:50 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Dec-13 19:44:50 LOG4 take_data: Calling 'take_data 5 5 CAL OFF -' 2008-Dec-13 19:44:50 START begin_task: Starting task 'WAPP spectral observation' 2008-Dec-13 19:44:50 LOG5 begin_task: Level: (4) ID = <10248> Status = 0 0 0 0 ok 2008-Dec-13 19:44:50 LOG5 log_alfabeam: Parameters: 1.3841944444444445 30.221249999999998 0.831550 2008.9550247483967 -11.700080 2008-Dec-13 19:44:50 LOG4 log_alfabeam: ALFABEAM 0 1.384194444444445 30.221249999999994 2008-Dec-13 19:44:50 LOG4 log_alfabeam: ALFABEAM 1 1.384541628727378 30.121252004188502 2008-Dec-13 19:44:50 LOG4 log_alfabeam: ALFABEAM 2 1.390821134906242 30.187910026664426 2008-Dec-13 19:44:50 LOG4 log_alfabeam: ALFABEAM 3 1.390468442277080 30.288163890501767 2008-Dec-13 19:44:50 LOG4 log_alfabeam: ALFABEAM 4 1.383792722279681 30.321417553794390 2008-Dec-13 19:44:50 LOG4 log_alfabeam: ALFABEAM 5 1.377556045239143 30.253906334926761 2008-Dec-13 19:44:50 LOG4 log_alfabeam: ALFABEAM 6 1.377952038060882 30.153993951332300 2008-Dec-13 19:44:50 INFO2 take_data: Starting WAPP scan: 834800069 2008-Dec-13 19:44:50 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Dec-13 19:44:50 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Dec-13 19:44:50 LOG5 begin_task: Level: (5) ID = <10249> Status = 0 0 0 0 ok 2008-Dec-13 19:44:50 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Dec-13 19:44:50 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85491.00 2008-Dec-13 19:44:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.503 (still bad) 2008-Dec-13 19:44:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.140978 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Dec-13 19:44:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.140978 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:44:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.140978 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:44:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.140978 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Dec-13 19:44:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.140978 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:44:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.140978 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Dec-13 19:44:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.140978 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Dec-13 19:44:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.140978 MHz Flip = 1 Band = 0 Mixer = 1990.000000 MHz 2008-Dec-13 19:44:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.140978 MHz Flip = 1 Band = 0 Mixer = 2000.000000 MHz 2008-Dec-13 19:44:56 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Dec-13 19:44:56 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Dec-13 19:44:56 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Dec-13 19:44:56 LOG5 end_task: Level: (5) ID = <10249> Status = 0 0 0 0 ok 2008-Dec-13 19:44:56 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Dec-13 19:44:56 LOG5 end_task: Level: (4) ID = <10248> Status = 0 0 0 0 ok 2008-Dec-13 19:44:56 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Dec-13 19:44:56 STOP finish_task: Finishing task 'WAPP calibration' 2008-Dec-13 19:44:56 LOG5 finish_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2008-Dec-13 19:44:56 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Dec-13 19:44:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-13 19:44:56 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Dec-13 19:44:56 LOG5 end_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2008-Dec-13 19:44:57 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Dec-13 19:44:57 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 211.36 and ZA = 14.20 2008-Dec-13 19:44:57 LOG3 track_source: Calling 'track_source AGES33PP_p1_099 211.36 14.1971423769 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Dec-13 19:44:57 START begin_task: Starting task 'sending tracking commands' 2008-Dec-13 19:44:57 LOG5 begin_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2008-Dec-13 19:44:57 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES33PP_p1_099} INFO {Slewing to source 'AGES33PP_p1_099' ...} 2008-Dec-13 19:44:57 INFO1 track_source: Starting to track AGES33PP_p1_099 2008-Dec-13 19:44:57 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES33PP_p1_099" 2008-Dec-13 19:44:57 LOG3 vw_send: To DATATAKING: set ra 211.36 2008-Dec-13 19:44:57 LOG3 vw_send: To DATATAKING: set dec 14.1971423769 2008-Dec-13 19:44:57 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Dec-13 19:44:57 LOG3 vw_send: To DATATAKING: pnt tr 211.36 14.1971423769 -CF 2008-Dec-13 19:44:57 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Dec-13 19:44:57 STOP finish_task: Finishing task 'sending tracking commands' 2008-Dec-13 19:44:57 LOG5 finish_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2008-Dec-13 19:44:57 INFO2 finish_task: DONE finished sending: tracking commands 2008-Dec-13 19:44:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-13 19:44:57 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Dec-13 19:44:57 LOG5 end_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2008-Dec-13 19:44:57 LOG1 fixed_driftmap: Parameters: HA = -00:33:59.6 Start = 00:50:31.8 LST = 00:50:00.6 diff = 31.2 secs 2008-Dec-13 19:44:57 INFO2 fixed_driftmap: Waiting 29.2 seconds for RA 1:24:31 2008-Dec-13 19:44:57 INFO2 lstwait: Waiting for 29.1 secs from LST 00:50:01 to LST 00:50:30 ... 2008-Dec-13 19:44:57 LOG4 send_obs_status: To obs_status: <1> TASKTIME 29.107210681141456 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Dec-13 19:44:57 START begin_task: Starting task 'waiting on wait on LST' 2008-Dec-13 19:44:57 LOG5 begin_task: Level: (3) ID = <10251> Status = 0 0 0 0 ok 2008-Dec-13 19:44:57 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES33PP_p1_099" 2008-Dec-13 19:44:57 LOG4 got_cormsg: From DATATAKING: set ra 211.36 2008-Dec-13 19:44:57 LOG4 got_cormsg: From DATATAKING: set dec 14.1971423769 2008-Dec-13 19:44:57 LOG4 got_cormsg: From DATATAKING: vw% 211.36 2008-Dec-13 19:44:57 LOG4 got_cormsg: From DATATAKING: vw% 14.1971423769 2008-Dec-13 19:44:57 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:44:57 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Dec-13 19:44:57 LOG4 got_cormsg: From DATATAKING: pnt tr 211.36 14.1971423769 -CF 2008-Dec-13 19:44:57 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Dec-13 19:44:57 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Dec-13 19:44:57 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 19:45:01 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.115 (still bad) 2008-Dec-13 19:45:26 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Dec-13 19:45:26 LOG5 end_task: Level: (3) ID = <10251> Status = 0 0 0 0 ok 2008-Dec-13 19:45:26 LOG4 lstwait: Finished waiting 0.90 seconds late 2008-Dec-13 19:45:26 INFO3 lstwait: Finished waiting 2008-Dec-13 19:45:26 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Dec-13 19:45:26 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Dec-13 19:45:26 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Dec-13 19:45:26 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Dec-13 19:45:26 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Dec-13 19:45:26 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ -' 2008-Dec-13 19:45:26 START begin_task: Starting task 'WAPP spectral observation' 2008-Dec-13 19:45:26 LOG5 begin_task: Level: (3) ID = <10252> Status = 0 0 0 0 ok 2008-Dec-13 19:45:26 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Dec-13 19:45:26 INFO2 take_data: Starting WAPP scan: 834800070 2008-Dec-13 19:45:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Dec-13 19:45:27 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Dec-13 19:45:27 LOG5 begin_task: Level: (4) ID = <10253> Status = 0 0 0 0 ok 2008-Dec-13 19:45:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Dec-13 19:45:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85528.00 2008-Dec-13 19:45:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.140978 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Dec-13 19:45:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.140978 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:45:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.140978 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:45:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.140978 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Dec-13 19:45:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.140978 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 19:45:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.140978 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Dec-13 19:45:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.140978 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Dec-13 19:45:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.140978 MHz Flip = 1 Band = 0 Mixer = 1990.000000 MHz 2008-Dec-13 19:45:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.140978 MHz Flip = 1 Band = 0 Mixer = 2000.000000 MHz 2008-Dec-13 19:45:29 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.114 (still bad) 2008-Dec-13 19:45:31 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.116 (still bad) 2008-Dec-13 19:45:33 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.121 (still bad) 2008-Dec-13 19:45:35 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.116 (still bad) 2008-Dec-13 19:45:37 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.113 (still bad) 2008-Dec-13 19:45:39 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.115 (still bad) 2008-Dec-13 19:45:41 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2008-Dec-13 19:45:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2008-Dec-13 19:45:43 LOG4 check_wapp_levels: WAPP-1 power levels: 0.992 0.990 0.976 1.112 2008-Dec-13 19:45:43 LOG4 check_wapp_levels: WAPP-2 power levels: 1.061 0.992 0.911 0.933 2008-Dec-13 19:45:43 LOG4 check_wapp_levels: WAPP-3 power levels: 0.920 0.957 0.899 1.039 2008-Dec-13 19:45:43 LOG4 check_wapp_levels: WAPP-4 power levels: 1.048 0.105 0.925 0.117 2008-Dec-13 19:45:45 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.117 (still bad) 2008-Dec-13 19:45:47 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.113 (still bad) 2008-Dec-13 19:45:49 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2008-Dec-13 19:45:51 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.113 (still bad) 2008-Dec-13 19:45:53 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2008-Dec-13 19:45:55 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2008-Dec-13 19:45:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2008-Dec-13 19:45:59 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.113 (still bad) 2008-Dec-13 19:46:01 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2008-Dec-13 19:46:03 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2008-Dec-13 19:46:05 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2008-Dec-13 19:46:07 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2008-Dec-13 19:46:09 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.115 (still bad) 2008-Dec-13 19:46:11 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2008-Dec-13 19:46:13 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2008-Dec-13 19:46:15 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2008-Dec-13 19:46:17 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2008-Dec-13 19:46:19 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2008-Dec-13 19:46:21 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2008-Dec-13 19:46:23 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2008-Dec-13 19:46:25 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2008-Dec-13 19:46:27 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2008-Dec-13 19:46:29 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2008-Dec-13 19:46:31 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2008-Dec-13 19:46:33 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.113 (still bad) 2008-Dec-13 19:46:35 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.114 (still bad) 2008-Dec-13 19:46:38 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2008-Dec-13 19:46:40 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.113 (still bad) 2008-Dec-13 19:46:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.111 (still bad) 2008-Dec-13 19:46:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2008-Dec-13 19:46:44 LOG4 check_wapp_levels: WAPP-1 power levels: 0.986 0.989 0.975 1.111 2008-Dec-13 19:46:44 LOG4 check_wapp_levels: WAPP-2 power levels: 1.059 0.986 0.910 0.930 2008-Dec-13 19:46:44 LOG4 check_wapp_levels: WAPP-3 power levels: 0.919 0.953 0.900 1.035 2008-Dec-13 19:46:44 LOG4 check_wapp_levels: WAPP-4 power levels: 1.045 0.105 0.921 0.117 2008-Dec-13 19:46:46 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.113 (still bad) 2008-Dec-13 19:46:48 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2008-Dec-13 19:46:50 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2008-Dec-13 19:46:52 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2008-Dec-13 19:46:54 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.108 (still bad) 2008-Dec-13 19:46:56 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.108 (still bad) 2008-Dec-13 19:46:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.111 (still bad) 2008-Dec-13 19:47:00 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2008-Dec-13 19:47:02 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.105 (still bad) 2008-Dec-13 19:47:04 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2008-Dec-13 19:47:06 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2008-Dec-13 19:47:08 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2008-Dec-13 19:47:10 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.116 (still bad) 2008-Dec-13 19:47:12 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.108 (still bad) 2008-Dec-13 19:47:14 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2008-Dec-13 19:47:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.111 (still bad) 2008-Dec-13 19:47:18 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2008-Dec-13 19:47:20 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2008-Dec-13 19:47:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2008-Dec-13 19:47:24 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2008-Dec-13 19:47:26 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.108 (still bad) 2008-Dec-13 19:47:28 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2008-Dec-13 19:47:30 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.106 (still bad) 2008-Dec-13 19:47:32 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2008-Dec-13 19:47:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2008-Dec-13 19:47:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2008-Dec-13 19:47:38 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.108 (still bad) 2008-Dec-13 19:47:40 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2008-Dec-13 19:47:42 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2008-Dec-13 19:47:44 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2008-Dec-13 19:47:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2008-Dec-13 19:47:46 LOG4 check_wapp_levels: WAPP-1 power levels: 0.995 0.996 0.979 1.116 2008-Dec-13 19:47:46 LOG4 check_wapp_levels: WAPP-2 power levels: 1.068 0.993 0.917 0.939 2008-Dec-13 19:47:46 LOG4 check_wapp_levels: WAPP-3 power levels: 0.925 0.962 0.910 1.044 2008-Dec-13 19:47:46 LOG4 check_wapp_levels: WAPP-4 power levels: 1.053 0.106 0.929 0.117 2008-Dec-13 19:47:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.110 (still bad) 2008-Dec-13 19:47:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.110 (still bad) 2008-Dec-13 19:47:52 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.113 (still bad) 2008-Dec-13 19:47:54 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2008-Dec-13 19:47:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2008-Dec-13 19:47:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2008-Dec-13 19:48:00 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2008-Dec-13 19:48:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.109 (still bad) 2008-Dec-13 19:48:05 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2008-Dec-13 19:48:07 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2008-Dec-13 19:48:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.110 (still bad) 2008-Dec-13 19:48:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2008-Dec-13 19:48:13 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2008-Dec-13 19:48:15 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2008-Dec-13 19:48:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2008-Dec-13 19:48:19 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2008-Dec-13 19:48:21 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2008-Dec-13 19:48:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2008-Dec-13 19:48:25 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2008-Dec-13 19:48:27 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2008-Dec-13 19:48:29 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2008-Dec-13 19:48:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.110 (still bad) 2008-Dec-13 19:48:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.111 (still bad) 2008-Dec-13 19:48:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2008-Dec-13 19:48:37 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2008-Dec-13 19:48:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2008-Dec-13 19:48:41 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2008-Dec-13 19:48:43 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.108 (still bad) 2008-Dec-13 19:48:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.112 (still bad) 2008-Dec-13 19:48:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2008-Dec-13 19:48:47 LOG4 check_wapp_levels: WAPP-1 power levels: 0.991 0.993 0.974 1.110 2008-Dec-13 19:48:47 LOG4 check_wapp_levels: WAPP-2 power levels: 1.063 0.989 0.909 0.934 2008-Dec-13 19:48:47 LOG4 check_wapp_levels: WAPP-3 power levels: 0.929 0.969 0.908 1.047 2008-Dec-13 19:48:47 LOG4 check_wapp_levels: WAPP-4 power levels: 1.053 0.106 0.929 0.117 2008-Dec-13 19:48:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.109 (still bad) 2008-Dec-13 19:48:51 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2008-Dec-13 19:48:53 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2008-Dec-13 19:48:55 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2008-Dec-13 19:48:57 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.113 (still bad) 2008-Dec-13 19:48:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.109 (still bad) 2008-Dec-13 19:49:01 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2008-Dec-13 19:49:03 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2008-Dec-13 19:49:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2008-Dec-13 19:49:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.110 (still bad) 2008-Dec-13 19:49:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.112 (still bad) 2008-Dec-13 19:49:11 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2008-Dec-13 19:49:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.110 (still bad) 2008-Dec-13 19:49:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.111 (still bad) 2008-Dec-13 19:49:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.111 (still bad) 2008-Dec-13 19:49:19 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2008-Dec-13 19:49:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.109 (still bad) 2008-Dec-13 19:49:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.110 (still bad) 2008-Dec-13 19:49:25 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2008-Dec-13 19:49:28 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.116 (still bad) 2008-Dec-13 19:49:30 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.123 (still bad) 2008-Dec-13 19:49:32 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.128 (still bad) 2008-Dec-13 19:49:34 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.138 (still bad) 2008-Dec-13 19:49:36 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.145 (still bad) 2008-Dec-13 19:49:38 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.149 (still bad) 2008-Dec-13 19:49:40 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.154 (still bad) 2008-Dec-13 19:49:42 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.153 (still bad) 2008-Dec-13 19:49:44 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.148 (still bad) 2008-Dec-13 19:49:46 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.146 (still bad) 2008-Dec-13 19:49:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2008-Dec-13 19:49:48 LOG4 check_wapp_levels: WAPP-1 power levels: 0.992 0.996 1.002 1.136 2008-Dec-13 19:49:48 LOG4 check_wapp_levels: WAPP-2 power levels: 1.065 0.990 0.910 0.934 2008-Dec-13 19:49:48 LOG4 check_wapp_levels: WAPP-3 power levels: 0.922 0.958 0.903 1.042 2008-Dec-13 19:49:48 LOG4 check_wapp_levels: WAPP-4 power levels: 1.049 0.105 0.925 0.117 2008-Dec-13 19:49:50 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.129 (still bad) 2008-Dec-13 19:49:52 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.123 (still bad) 2008-Dec-13 19:49:54 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.115 (still bad) 2008-Dec-13 19:49:56 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2008-Dec-13 19:49:58 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2008-Dec-13 19:50:00 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2008-Dec-13 19:50:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2008-Dec-13 19:50:04 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.116 (still bad) 2008-Dec-13 19:50:06 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.120 (still bad) 2008-Dec-13 19:50:08 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.125 (still bad) 2008-Dec-13 19:50:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2008-Dec-13 19:50:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2008-Dec-13 19:50:14 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.130 (still bad) 2008-Dec-13 19:50:16 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.129 (still bad) 2008-Dec-13 19:50:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2008-Dec-13 19:50:20 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.123 (still bad) 2008-Dec-13 19:50:22 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.119 (still bad) 2008-Dec-13 19:50:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2008-Dec-13 19:50:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.111 (still bad) 2008-Dec-13 19:50:28 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.114 (still bad) 2008-Dec-13 19:50:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.109 (still bad) 2008-Dec-13 19:50:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.111 (still bad) 2008-Dec-13 19:50:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2008-Dec-13 19:50:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.111 (still bad) 2008-Dec-13 19:50:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.109 (still bad) 2008-Dec-13 19:50:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.112 (still bad) 2008-Dec-13 19:50:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2008-Dec-13 19:50:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.110 (still bad) 2008-Dec-13 19:50:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2008-Dec-13 19:50:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2008-Dec-13 19:50:49 LOG4 check_wapp_levels: WAPP-1 power levels: 0.994 0.994 0.975 1.109 2008-Dec-13 19:50:49 LOG4 check_wapp_levels: WAPP-2 power levels: 1.062 0.989 0.908 0.932 2008-Dec-13 19:50:49 LOG4 check_wapp_levels: WAPP-3 power levels: 0.921 0.959 0.901 1.041 2008-Dec-13 19:50:49 LOG4 check_wapp_levels: WAPP-4 power levels: 1.050 0.106 0.926 0.117 2008-Dec-13 19:50:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2008-Dec-13 19:50:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.111 (still bad) 2008-Dec-13 19:50:55 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2008-Dec-13 19:50:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2008-Dec-13 19:50:59 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.117 (still bad) 2008-Dec-13 19:51:01 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2008-Dec-13 19:51:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2008-Dec-13 19:51:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.111 (still bad) 2008-Dec-13 19:51:07 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2008-Dec-13 19:51:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2008-Dec-13 19:51:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2008-Dec-13 19:51:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2008-Dec-13 19:51:15 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2008-Dec-13 19:51:17 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2008-Dec-13 19:51:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2008-Dec-13 19:51:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.110 (still bad) 2008-Dec-13 19:51:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2008-Dec-13 19:51:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.109 (still bad) 2008-Dec-13 19:51:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.109 (still bad) 2008-Dec-13 19:51:29 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2008-Dec-13 19:51:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2008-Dec-13 19:51:33 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.108 (still bad) 2008-Dec-13 19:51:35 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.119 (still bad) 2008-Dec-13 19:51:37 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2008-Dec-13 19:51:39 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2008-Dec-13 19:51:41 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2008-Dec-13 19:51:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2008-Dec-13 19:51:45 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.106 (still bad) 2008-Dec-13 19:51:47 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.115 (still bad) 2008-Dec-13 19:51:49 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2008-Dec-13 19:51:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2008-Dec-13 19:51:51 LOG4 check_wapp_levels: WAPP-1 power levels: 0.994 0.995 0.973 1.106 2008-Dec-13 19:51:51 LOG4 check_wapp_levels: WAPP-2 power levels: 1.062 0.989 0.907 0.932 2008-Dec-13 19:51:51 LOG4 check_wapp_levels: WAPP-3 power levels: 0.923 0.957 0.904 1.042 2008-Dec-13 19:51:51 LOG4 check_wapp_levels: WAPP-4 power levels: 1.048 0.106 0.923 0.117 2008-Dec-13 19:51:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2008-Dec-13 19:51:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2008-Dec-13 19:51:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2008-Dec-13 19:51:59 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.116 (still bad) 2008-Dec-13 19:52:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2008-Dec-13 19:52:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2008-Dec-13 19:52:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2008-Dec-13 19:52:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2008-Dec-13 19:52:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.109 (still bad) 2008-Dec-13 19:52:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2008-Dec-13 19:52:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2008-Dec-13 19:52:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2008-Dec-13 19:52:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.111 (still bad) 2008-Dec-13 19:52:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.111 (still bad) 2008-Dec-13 19:52:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.111 (still bad) 2008-Dec-13 19:52:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.112 (still bad) 2008-Dec-13 19:52:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.111 (still bad) 2008-Dec-13 19:52:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.111 (still bad) 2008-Dec-13 19:52:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.112 (still bad) 2008-Dec-13 19:52:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.110 (still bad) 2008-Dec-13 19:52:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.111 (still bad) 2008-Dec-13 19:52:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2008-Dec-13 19:52:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.110 (still bad) 2008-Dec-13 19:52:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.111 (still bad) 2008-Dec-13 19:52:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2008-Dec-13 19:52:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.110 (still bad) 2008-Dec-13 19:52:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2008-Dec-13 19:52:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2008-Dec-13 19:52:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.111 (still bad) 2008-Dec-13 19:52:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2008-Dec-13 19:52:52 LOG4 check_wapp_levels: WAPP-1 power levels: 0.995 0.996 0.973 1.110 2008-Dec-13 19:52:52 LOG4 check_wapp_levels: WAPP-2 power levels: 1.062 0.988 0.915 0.934 2008-Dec-13 19:52:52 LOG4 check_wapp_levels: WAPP-3 power levels: 0.925 0.957 0.907 1.043 2008-Dec-13 19:52:52 LOG4 check_wapp_levels: WAPP-4 power levels: 1.051 0.106 0.926 0.117 2008-Dec-13 19:52:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2008-Dec-13 19:52:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.111 (still bad) 2008-Dec-13 19:52:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2008-Dec-13 19:53:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2008-Dec-13 19:53:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.112 (still bad) 2008-Dec-13 19:53:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.111 (still bad) 2008-Dec-13 19:53:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2008-Dec-13 19:53:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.110 (still bad) 2008-Dec-13 19:53:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2008-Dec-13 19:53:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2008-Dec-13 19:53:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.112 (still bad) 2008-Dec-13 19:53:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.110 (still bad) 2008-Dec-13 19:53:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2008-Dec-13 19:53:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2008-Dec-13 19:53:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2008-Dec-13 19:53:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2008-Dec-13 19:53:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2008-Dec-13 19:53:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2008-Dec-13 19:53:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2008-Dec-13 19:53:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2008-Dec-13 19:53:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2008-Dec-13 19:53:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2008-Dec-13 19:53:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2008-Dec-13 19:53:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2008-Dec-13 19:53:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2008-Dec-13 19:53:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2008-Dec-13 19:53:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2008-Dec-13 19:53:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2008-Dec-13 19:53:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2008-Dec-13 19:53:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2008-Dec-13 19:53:53 LOG4 check_wapp_levels: WAPP-1 power levels: 1.000 1.004 0.978 1.115 2008-Dec-13 19:53:53 LOG4 check_wapp_levels: WAPP-2 power levels: 1.071 0.998 0.919 0.941 2008-Dec-13 19:53:53 LOG4 check_wapp_levels: WAPP-3 power levels: 0.929 0.958 0.907 1.047 2008-Dec-13 19:53:53 LOG4 check_wapp_levels: WAPP-4 power levels: 1.051 0.106 0.926 0.117 2008-Dec-13 19:53:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.112 (still bad) 2008-Dec-13 19:53:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.112 (still bad) 2008-Dec-13 19:53:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2008-Dec-13 19:54:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2008-Dec-13 19:54:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.112 (still bad) 2008-Dec-13 19:54:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2008-Dec-13 19:54:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2008-Dec-13 19:54:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2008-Dec-13 19:54:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2008-Dec-13 19:54:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2008-Dec-13 19:54:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2008-Dec-13 19:54:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2008-Dec-13 19:54:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2008-Dec-13 19:54:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2008-Dec-13 19:54:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2008-Dec-13 19:54:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2008-Dec-13 19:54:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2008-Dec-13 19:54:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2008-Dec-13 19:54:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2008-Dec-13 19:54:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2008-Dec-13 19:54:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2008-Dec-13 19:54:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2008-Dec-13 19:54:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2008-Dec-13 19:54:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2008-Dec-13 19:54:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2008-Dec-13 19:54:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2008-Dec-13 19:54:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2008-Dec-13 19:54:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2008-Dec-13 19:54:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.112 (still bad) 2008-Dec-13 19:54:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2008-Dec-13 19:54:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2008-Dec-13 19:54:55 LOG4 check_wapp_levels: WAPP-1 power levels: 1.000 1.001 0.981 1.113 2008-Dec-13 19:54:55 LOG4 check_wapp_levels: WAPP-2 power levels: 1.068 0.994 0.917 0.942 2008-Dec-13 19:54:55 LOG4 check_wapp_levels: WAPP-3 power levels: 0.933 0.967 0.909 1.049 2008-Dec-13 19:54:55 LOG4 check_wapp_levels: WAPP-4 power levels: 1.053 0.106 0.928 0.117 2008-Dec-13 19:54:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2008-Dec-13 19:54:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2008-Dec-13 19:55:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2008-Dec-13 19:55:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2008-Dec-13 19:55:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2008-Dec-13 19:55:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2008-Dec-13 19:55:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2008-Dec-13 19:55:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2008-Dec-13 19:55:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2008-Dec-13 19:55:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2008-Dec-13 19:55:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2008-Dec-13 19:55:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2008-Dec-13 19:55:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2008-Dec-13 19:55:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2008-Dec-13 19:55:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2008-Dec-13 19:55:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2008-Dec-13 19:55:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2008-Dec-13 19:55:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2008-Dec-13 19:55:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2008-Dec-13 19:55:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2008-Dec-13 19:55:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2008-Dec-13 19:55:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2008-Dec-13 19:55:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2008-Dec-13 19:55:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2008-Dec-13 19:55:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2008-Dec-13 19:55:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2008-Dec-13 19:55:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2008-Dec-13 19:55:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2008-Dec-13 19:55:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2008-Dec-13 19:55:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2008-Dec-13 19:55:56 LOG4 check_wapp_levels: WAPP-1 power levels: 1.001 1.006 0.987 1.121 2008-Dec-13 19:55:56 LOG4 check_wapp_levels: WAPP-2 power levels: 1.067 0.994 0.915 0.940 2008-Dec-13 19:55:56 LOG4 check_wapp_levels: WAPP-3 power levels: 0.933 0.966 0.913 1.054 2008-Dec-13 19:55:56 LOG4 check_wapp_levels: WAPP-4 power levels: 1.055 0.106 0.931 0.117 2008-Dec-13 19:55:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2008-Dec-13 19:56:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2008-Dec-13 19:56:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2008-Dec-13 19:56:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2008-Dec-13 19:56:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2008-Dec-13 19:56:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2008-Dec-13 19:56:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2008-Dec-13 19:56:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2008-Dec-13 19:56:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2008-Dec-13 19:56:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2008-Dec-13 19:56:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2008-Dec-13 19:56:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2008-Dec-13 19:56:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2008-Dec-13 19:56:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2008-Dec-13 19:56:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2008-Dec-13 19:56:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2008-Dec-13 19:56:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2008-Dec-13 19:56:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2008-Dec-13 19:56:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2008-Dec-13 19:56:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2008-Dec-13 19:56:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2008-Dec-13 19:56:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2008-Dec-13 19:56:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2008-Dec-13 19:56:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2008-Dec-13 19:56:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2008-Dec-13 19:56:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2008-Dec-13 19:56:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2008-Dec-13 19:56:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2008-Dec-13 19:56:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2008-Dec-13 19:56:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2008-Dec-13 19:56:57 LOG4 check_wapp_levels: WAPP-1 power levels: 1.001 1.003 0.984 1.120 2008-Dec-13 19:56:57 LOG4 check_wapp_levels: WAPP-2 power levels: 1.071 1.002 0.919 0.942 2008-Dec-13 19:56:57 LOG4 check_wapp_levels: WAPP-3 power levels: 0.930 0.962 0.910 1.051 2008-Dec-13 19:56:57 LOG4 check_wapp_levels: WAPP-4 power levels: 1.057 0.106 0.932 0.117 2008-Dec-13 19:56:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2008-Dec-13 19:57:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2008-Dec-13 19:57:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2008-Dec-13 19:57:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2008-Dec-13 19:57:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2008-Dec-13 19:57:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2008-Dec-13 19:57:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2008-Dec-13 19:57:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2008-Dec-13 19:57:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2008-Dec-13 19:57:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2008-Dec-13 19:57:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2008-Dec-13 19:57:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2008-Dec-13 19:57:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.139 (still bad) 2008-Dec-13 19:57:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2008-Dec-13 19:57:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2008-Dec-13 19:57:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2008-Dec-13 19:57:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2008-Dec-13 19:57:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2008-Dec-13 19:57:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2008-Dec-13 19:57:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2008-Dec-13 19:57:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2008-Dec-13 19:57:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2008-Dec-13 19:57:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2008-Dec-13 19:57:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2008-Dec-13 19:57:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2008-Dec-13 19:57:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2008-Dec-13 19:57:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2008-Dec-13 19:57:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2008-Dec-13 19:57:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2008-Dec-13 19:57:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2008-Dec-13 19:57:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2008-Dec-13 19:57:59 LOG4 check_wapp_levels: WAPP-1 power levels: 1.027 1.030 0.990 1.127 2008-Dec-13 19:57:59 LOG4 check_wapp_levels: WAPP-2 power levels: 1.104 1.026 1.005 1.028 2008-Dec-13 19:57:59 LOG4 check_wapp_levels: WAPP-3 power levels: 0.937 0.970 0.917 1.059 2008-Dec-13 19:57:59 LOG4 check_wapp_levels: WAPP-4 power levels: 1.065 0.106 0.940 0.117 2008-Dec-13 19:58:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2008-Dec-13 19:58:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2008-Dec-13 19:58:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2008-Dec-13 19:58:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2008-Dec-13 19:58:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2008-Dec-13 19:58:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.164 (still bad) 2008-Dec-13 19:58:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.216 (still bad) 2008-Dec-13 19:58:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.266 (still bad) 2008-Dec-13 19:58:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.301 (still bad) 2008-Dec-13 19:58:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.314 (still bad) 2008-Dec-13 19:58:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.298 (still bad) 2008-Dec-13 19:58:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.268 (still bad) 2008-Dec-13 19:58:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.204 (still bad) 2008-Dec-13 19:58:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.145 (still bad) 2008-Dec-13 19:58:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2008-Dec-13 19:58:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2008-Dec-13 19:58:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.184 (still bad) 2008-Dec-13 19:58:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.260 (still bad) 2008-Dec-13 19:58:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.323 (still bad) 2008-Dec-13 19:58:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.393 (still bad) 2008-Dec-13 19:58:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.443 (still bad) 2008-Dec-13 19:58:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.466 (still bad) 2008-Dec-13 19:58:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.462 (still bad) 2008-Dec-13 19:58:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.430 (still bad) 2008-Dec-13 19:58:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.358 (still bad) 2008-Dec-13 19:58:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.281 (still bad) 2008-Dec-13 19:58:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.208 (still bad) 2008-Dec-13 19:58:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2008-Dec-13 19:58:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2008-Dec-13 19:59:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2008-Dec-13 19:59:00 LOG4 check_wapp_levels: WAPP-1 power levels: 1.002 1.006 0.984 1.122 2008-Dec-13 19:59:00 LOG4 check_wapp_levels: WAPP-2 power levels: 1.074 1.001 0.918 0.941 2008-Dec-13 19:59:00 LOG4 check_wapp_levels: WAPP-3 power levels: 0.932 0.964 0.941 1.090 2008-Dec-13 19:59:00 LOG4 check_wapp_levels: WAPP-4 power levels: 1.069 0.106 0.942 0.117 2008-Dec-13 19:59:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2008-Dec-13 19:59:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2008-Dec-13 19:59:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2008-Dec-13 19:59:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2008-Dec-13 19:59:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2008-Dec-13 19:59:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2008-Dec-13 19:59:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2008-Dec-13 19:59:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2008-Dec-13 19:59:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2008-Dec-13 19:59:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2008-Dec-13 19:59:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2008-Dec-13 19:59:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2008-Dec-13 19:59:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2008-Dec-13 19:59:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2008-Dec-13 19:59:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2008-Dec-13 19:59:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2008-Dec-13 19:59:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2008-Dec-13 19:59:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2008-Dec-13 19:59:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2008-Dec-13 19:59:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2008-Dec-13 19:59:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2008-Dec-13 19:59:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2008-Dec-13 19:59:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2008-Dec-13 19:59:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2008-Dec-13 19:59:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2008-Dec-13 19:59:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2008-Dec-13 19:59:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2008-Dec-13 19:59:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2008-Dec-13 19:59:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2008-Dec-13 20:00:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2008-Dec-13 20:00:01 LOG4 check_wapp_levels: WAPP-1 power levels: 1.003 1.005 0.986 1.120 2008-Dec-13 20:00:01 LOG4 check_wapp_levels: WAPP-2 power levels: 1.074 0.997 0.915 0.941 2008-Dec-13 20:00:01 LOG4 check_wapp_levels: WAPP-3 power levels: 0.930 0.965 0.911 1.053 2008-Dec-13 20:00:01 LOG4 check_wapp_levels: WAPP-4 power levels: 1.063 0.106 0.937 0.117 2008-Dec-13 20:00:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2008-Dec-13 20:00:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2008-Dec-13 20:00:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2008-Dec-13 20:00:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2008-Dec-13 20:00:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2008-Dec-13 20:00:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2008-Dec-13 20:00:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2008-Dec-13 20:00:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2008-Dec-13 20:00:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2008-Dec-13 20:00:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2008-Dec-13 20:00:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2008-Dec-13 20:00:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2008-Dec-13 20:00:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2008-Dec-13 20:00:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2008-Dec-13 20:00:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2008-Dec-13 20:00:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2008-Dec-13 20:00:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2008-Dec-13 20:00:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2008-Dec-13 20:00:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2008-Dec-13 20:00:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2008-Dec-13 20:00:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2008-Dec-13 20:00:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2008-Dec-13 20:00:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2008-Dec-13 20:00:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2008-Dec-13 20:00:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2008-Dec-13 20:00:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2008-Dec-13 20:00:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2008-Dec-13 20:00:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2008-Dec-13 20:00:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2008-Dec-13 20:01:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2008-Dec-13 20:01:02 LOG4 check_wapp_levels: WAPP-1 power levels: 1.002 1.008 0.986 1.119 2008-Dec-13 20:01:02 LOG4 check_wapp_levels: WAPP-2 power levels: 1.074 0.998 0.917 0.944 2008-Dec-13 20:01:02 LOG4 check_wapp_levels: WAPP-3 power levels: 0.931 0.968 0.914 1.056 2008-Dec-13 20:01:02 LOG4 check_wapp_levels: WAPP-4 power levels: 1.061 0.106 0.936 0.117 2008-Dec-13 20:01:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2008-Dec-13 20:01:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2008-Dec-13 20:01:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2008-Dec-13 20:01:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2008-Dec-13 20:01:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2008-Dec-13 20:01:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2008-Dec-13 20:01:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2008-Dec-13 20:01:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2008-Dec-13 20:01:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2008-Dec-13 20:01:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2008-Dec-13 20:01:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2008-Dec-13 20:01:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2008-Dec-13 20:01:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2008-Dec-13 20:01:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2008-Dec-13 20:01:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2008-Dec-13 20:01:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2008-Dec-13 20:01:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2008-Dec-13 20:01:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2008-Dec-13 20:01:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2008-Dec-13 20:01:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2008-Dec-13 20:01:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2008-Dec-13 20:01:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2008-Dec-13 20:01:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2008-Dec-13 20:01:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2008-Dec-13 20:01:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2008-Dec-13 20:01:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2008-Dec-13 20:01:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2008-Dec-13 20:01:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2008-Dec-13 20:02:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2008-Dec-13 20:02:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2008-Dec-13 20:02:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2008-Dec-13 20:02:04 LOG4 check_wapp_levels: WAPP-1 power levels: 1.002 1.004 0.986 1.117 2008-Dec-13 20:02:04 LOG4 check_wapp_levels: WAPP-2 power levels: 1.075 1.000 0.918 0.944 2008-Dec-13 20:02:04 LOG4 check_wapp_levels: WAPP-3 power levels: 0.932 0.965 0.911 1.053 2008-Dec-13 20:02:04 LOG4 check_wapp_levels: WAPP-4 power levels: 1.059 0.106 0.935 0.117 2008-Dec-13 20:02:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2008-Dec-13 20:02:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2008-Dec-13 20:02:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2008-Dec-13 20:02:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2008-Dec-13 20:02:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2008-Dec-13 20:02:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2008-Dec-13 20:02:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2008-Dec-13 20:02:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2008-Dec-13 20:02:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2008-Dec-13 20:02:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2008-Dec-13 20:02:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2008-Dec-13 20:02:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2008-Dec-13 20:02:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2008-Dec-13 20:02:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2008-Dec-13 20:02:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2008-Dec-13 20:02:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2008-Dec-13 20:02:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2008-Dec-13 20:02:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2008-Dec-13 20:02:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2008-Dec-13 20:02:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2008-Dec-13 20:02:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2008-Dec-13 20:02:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2008-Dec-13 20:02:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2008-Dec-13 20:02:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2008-Dec-13 20:02:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2008-Dec-13 20:02:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2008-Dec-13 20:02:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2008-Dec-13 20:03:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2008-Dec-13 20:03:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2008-Dec-13 20:03:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2008-Dec-13 20:03:05 LOG4 check_wapp_levels: WAPP-1 power levels: 1.001 1.003 0.985 1.114 2008-Dec-13 20:03:05 LOG4 check_wapp_levels: WAPP-2 power levels: 1.075 1.002 0.918 0.940 2008-Dec-13 20:03:05 LOG4 check_wapp_levels: WAPP-3 power levels: 0.934 0.968 0.912 1.054 2008-Dec-13 20:03:05 LOG4 check_wapp_levels: WAPP-4 power levels: 1.059 0.106 0.934 0.117 2008-Dec-13 20:03:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2008-Dec-13 20:03:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2008-Dec-13 20:03:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2008-Dec-13 20:03:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2008-Dec-13 20:03:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2008-Dec-13 20:03:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2008-Dec-13 20:03:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2008-Dec-13 20:03:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2008-Dec-13 20:03:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2008-Dec-13 20:03:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2008-Dec-13 20:03:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2008-Dec-13 20:03:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2008-Dec-13 20:03:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2008-Dec-13 20:03:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2008-Dec-13 20:03:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2008-Dec-13 20:03:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2008-Dec-13 20:03:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2008-Dec-13 20:03:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2008-Dec-13 20:03:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2008-Dec-13 20:03:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2008-Dec-13 20:03:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2008-Dec-13 20:03:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2008-Dec-13 20:03:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2008-Dec-13 20:03:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2008-Dec-13 20:03:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2008-Dec-13 20:03:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2008-Dec-13 20:04:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2008-Dec-13 20:04:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2008-Dec-13 20:04:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2008-Dec-13 20:04:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2008-Dec-13 20:04:06 LOG4 check_wapp_levels: WAPP-1 power levels: 1.002 1.004 0.988 1.120 2008-Dec-13 20:04:06 LOG4 check_wapp_levels: WAPP-2 power levels: 1.070 0.995 0.917 0.939 2008-Dec-13 20:04:06 LOG4 check_wapp_levels: WAPP-3 power levels: 0.927 0.964 0.911 1.049 2008-Dec-13 20:04:06 LOG4 check_wapp_levels: WAPP-4 power levels: 1.056 0.106 0.931 0.117 2008-Dec-13 20:04:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2008-Dec-13 20:04:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2008-Dec-13 20:04:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2008-Dec-13 20:04:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2008-Dec-13 20:04:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2008-Dec-13 20:04:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2008-Dec-13 20:04:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2008-Dec-13 20:04:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2008-Dec-13 20:04:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2008-Dec-13 20:04:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2008-Dec-13 20:04:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2008-Dec-13 20:04:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2008-Dec-13 20:04:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.111 (still bad) 2008-Dec-13 20:04:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.111 (still bad) 2008-Dec-13 20:04:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2008-Dec-13 20:04:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.112 (still bad) 2008-Dec-13 20:04:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.112 (still bad) 2008-Dec-13 20:04:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2008-Dec-13 20:04:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.111 (still bad) 2008-Dec-13 20:04:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2008-Dec-13 20:04:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2008-Dec-13 20:04:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2008-Dec-13 20:04:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2008-Dec-13 20:04:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2008-Dec-13 20:04:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2008-Dec-13 20:04:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2008-Dec-13 20:05:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2008-Dec-13 20:05:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2008-Dec-13 20:05:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2008-Dec-13 20:05:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2008-Dec-13 20:05:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2008-Dec-13 20:05:08 LOG4 check_wapp_levels: WAPP-1 power levels: 1.001 1.002 0.982 1.114 2008-Dec-13 20:05:08 LOG4 check_wapp_levels: WAPP-2 power levels: 1.072 0.995 0.916 0.939 2008-Dec-13 20:05:08 LOG4 check_wapp_levels: WAPP-3 power levels: 0.930 0.964 0.909 1.051 2008-Dec-13 20:05:08 LOG4 check_wapp_levels: WAPP-4 power levels: 1.057 0.106 0.932 0.117 2008-Dec-13 20:05:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2008-Dec-13 20:05:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2008-Dec-13 20:05:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2008-Dec-13 20:05:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2008-Dec-13 20:05:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2008-Dec-13 20:05:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2008-Dec-13 20:05:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2008-Dec-13 20:05:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2008-Dec-13 20:05:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2008-Dec-13 20:05:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Dec-13 20:05:28 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Dec-13 20:05:28 LOG5 end_task: Level: (4) ID = <10253> Status = 0 0 0 0 ok 2008-Dec-13 20:05:28 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Dec-13 20:05:28 LOG5 end_task: Level: (3) ID = <10252> Status = 0 0 0 0 ok 2008-Dec-13 20:05:28 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Dec-13 20:05:28 LOG5 finish_task: Level: (2) ID = <10219> Status = 0 0 0 0 ok 2008-Dec-13 20:05:28 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Dec-13 20:05:28 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Dec-13 20:05:28 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Dec-13 20:05:28 LOG5 end_task: Level: (2) ID = <10219> Status = 0 0 0 0 ok 2008-Dec-13 20:05:28 COMMAND run_command_line: EXECUTING command 33: 'ENDIF' 2008-Dec-13 20:05:28 COMMAND run_command_line: EXECUTING command 36: 'IF LSTSLEW(AGES33PP_p2_080) < 011331 THEN' 2008-Dec-13 20:05:29 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES33PP_p2_080) < 011331 2008-Dec-13 20:05:29 INFO5 is_if_valid: Condition parsed as: 1.1883256666666666 < 1.2252777777777779 2008-Dec-13 20:05:29 COMMAND run_command_line: EXECUTING command 37: 'FIXEDDRIFT az=190.86 alfaangle=8.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p2_080 ra=12400.00 dec=304130.00' 2008-Dec-13 20:05:29 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Dec-13 20:05:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2008-Dec-13 20:05:29 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Dec-13 20:05:29 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 190.86 8.8 hcorcal 5 tracking no first 1 AGES33PP_p2_080 12400.00 304130.00 J 8500.0 Heliocentric velocity(optical)' 2008-Dec-13 20:05:29 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Dec-13 20:05:29 LOG5 begin_task: Level: (2) ID = <10254> Status = 0 0 0 0 ok 2008-Dec-13 20:05:29 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES33PP_p1_099' 2008-Dec-13 20:05:29 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Dec-13 20:05:29 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES33PP_p2_080} 2008-Dec-13 20:05:29 INFO3 fixed_driftmap: Sending telescope to Az = 190.86 and ZA = 12.64 2008-Dec-13 20:05:29 LOG3 track_source: Calling 'track_source AGES33PP_p2_080 190.86 12.6373222581 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Dec-13 20:05:29 START begin_task: Starting task 'sending tracking commands' 2008-Dec-13 20:05:29 LOG5 begin_task: Level: (3) ID = <10255> Status = 0 0 0 0 ok 2008-Dec-13 20:05:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES33PP_p2_080} INFO {Slewing to source 'AGES33PP_p2_080' ...} 2008-Dec-13 20:05:29 INFO1 track_source: Starting to track AGES33PP_p2_080 2008-Dec-13 20:05:29 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES33PP_p2_080" 2008-Dec-13 20:05:29 LOG3 vw_send: To DATATAKING: set ra 190.86 2008-Dec-13 20:05:30 LOG3 vw_send: To DATATAKING: set dec 12.6373222581 2008-Dec-13 20:05:30 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Dec-13 20:05:30 LOG3 vw_send: To DATATAKING: pnt tr 190.86 12.6373222581 -CF 2008-Dec-13 20:05:30 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Dec-13 20:05:30 STOP finish_task: Finishing task 'sending tracking commands' 2008-Dec-13 20:05:30 LOG5 finish_task: Level: (3) ID = <10255> Status = 0 0 0 0 ok 2008-Dec-13 20:05:30 INFO2 finish_task: DONE finished sending: tracking commands 2008-Dec-13 20:05:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-13 20:05:30 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Dec-13 20:05:30 LOG5 end_task: Level: (3) ID = <10255> Status = 0 0 0 0 ok 2008-Dec-13 20:05:30 START begin_task: Starting task 'rotate ALFA to +8.8 degrees' 2008-Dec-13 20:05:30 LOG5 begin_task: Level: (3) ID = <10256> Status = 0 0 0 0 ok 2008-Dec-13 20:05:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +8.8 degrees ...} 2008-Dec-13 20:05:30 INFO2 rotate_alfa: ALFA commanded to +8.8 degrees 2008-Dec-13 20:05:30 LOG3 sock_errsend: To ALFAMOTOR: POSITION 8.8 REPLY 2008-Dec-13 20:05:30 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Dec-13 20:05:30 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Dec-13 20:05:30 LOG5 begin_task: Level: (4) ID = <10257> Status = 0 0 0 0 ok 2008-Dec-13 20:05:30 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES33PP_p2_080" 2008-Dec-13 20:05:30 LOG4 got_cormsg: From DATATAKING: set ra 190.86 2008-Dec-13 20:05:30 LOG4 got_cormsg: From DATATAKING: vw% 190.86 2008-Dec-13 20:05:30 LOG4 got_cormsg: From DATATAKING: 2008-Dec-13 20:05:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 20:05:30 LOG4 got_cormsg: From DATATAKING: set dec 12.6373222581 2008-Dec-13 20:05:30 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Dec-13 20:05:30 LOG4 got_cormsg: From DATATAKING: pnt tr 190.86 12.6373222581 -CF 2008-Dec-13 20:05:30 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Dec-13 20:05:30 LOG4 got_cormsg: From DATATAKING: 12.6373222581 2008-Dec-13 20:05:30 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2008-Dec-13 20:05:42 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Dec-13 20:05:42 INFO3 alfa_motor: ALFA rotator in-position +8.80 degrees 2008-Dec-13 20:05:42 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Dec-13 20:05:42 LOG5 end_task: Level: (4) ID = <10257> Status = 0 0 0 0 ok 2008-Dec-13 20:05:42 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Dec-13 20:05:42 STOP finish_task: Finishing task 'rotate ALFA to +8.8 degrees' 2008-Dec-13 20:05:42 LOG5 finish_task: Level: (3) ID = <10256> Status = 0 0 0 0 ok 2008-Dec-13 20:05:42 INFO2 finish_task: DONE finished configuration: rotating ALFA to +8.8 degrees 2008-Dec-13 20:05:42 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-13 20:05:42 STOP end_task: Finishing task 'rotate ALFA to +8.8 degrees' with status 'OK' 2008-Dec-13 20:05:42 LOG5 end_task: Level: (3) ID = <10256> Status = 0 0 0 0 ok 2008-Dec-13 20:05:42 START begin_task: Starting task 'waiting on telescope' 2008-Dec-13 20:05:42 LOG5 begin_task: Level: (3) ID = <10258> Status = 0 0 0 0 ok 2008-Dec-13 20:05:42 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Dec-13 20:05:42 LOG3 waittrk: Start waittrk 5 2008-Dec-13 20:05:42 START begin_task: Starting task 'waiting on telescope movement' 2008-Dec-13 20:05:42 LOG5 begin_task: Level: (4) ID = <10259> Status = 0 0 0 0 ok 2008-Dec-13 20:05:47 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Dec-13 20:05:47 LOG5 end_task: Level: (4) ID = <10259> Status = 0 0 0 0 ok 2008-Dec-13 20:05:47 START begin_task: Starting task 'waiting on telescope on source' 2008-Dec-13 20:05:47 LOG5 begin_task: Level: (4) ID = <10260> Status = 0 0 0 0 ok 2008-Dec-13 20:06:35 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Dec-13 20:06:35 LOG5 end_task: Level: (4) ID = <10260> Status = 0 0 0 0 ok 2008-Dec-13 20:06:35 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Dec-13 20:06:35 INFO2 waittrk: Now tracking AGES33PP_p2_080 2008-Dec-13 20:06:35 LOG4 waittrk: Current telescope position: Az = 550.55 ZA = 12.67 2008-Dec-13 20:06:35 STOP finish_task: Finishing task 'waiting on telescope' 2008-Dec-13 20:06:35 LOG5 finish_task: Level: (3) ID = <10258> Status = 0 0 0 0 ok 2008-Dec-13 20:06:35 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Dec-13 20:06:35 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-13 20:06:35 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Dec-13 20:06:35 LOG5 end_task: Level: (3) ID = <10258> Status = 0 0 0 0 ok 2008-Dec-13 20:06:35 START begin_task: Starting task 'selecting calibration type' 2008-Dec-13 20:06:35 LOG5 begin_task: Level: (3) ID = <10261> Status = 0 0 0 0 ok 2008-Dec-13 20:06:35 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Dec-13 20:06:35 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Dec-13 20:06:35 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Dec-13 20:06:35 START begin_task: Starting task 'waiting on setcal' 2008-Dec-13 20:06:35 LOG5 begin_task: Level: (4) ID = <10262> Status = 0 0 0 0 ok 2008-Dec-13 20:06:35 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Dec-13 20:06:35 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Dec-13 20:06:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 20:06:36 LOG4 got_cormsg: From DATATAKING: DONE 2008-Dec-13 20:06:36 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Dec-13 20:06:36 LOG5 end_task: Level: (4) ID = <10262> Status = 0 0 0 0 ok 2008-Dec-13 20:06:36 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Dec-13 20:06:36 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Dec-13 20:06:36 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Dec-13 20:06:36 START begin_task: Starting task 'waiting on command to ALFA' 2008-Dec-13 20:06:36 LOG5 begin_task: Level: (4) ID = <10263> Status = 0 0 0 0 ok 2008-Dec-13 20:06:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 20:06:37 LOG4 got_alfamon: From ALFAMON: ACK 2008-Dec-13 20:06:37 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Dec-13 20:06:37 LOG5 end_task: Level: (4) ID = <10263> Status = 0 0 0 0 ok 2008-Dec-13 20:06:37 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Dec-13 20:06:37 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Dec-13 20:06:37 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Dec-13 20:06:37 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Dec-13 20:06:37 START begin_task: Starting task 'waiting on command to ALFA' 2008-Dec-13 20:06:37 LOG5 begin_task: Level: (4) ID = <10264> Status = 0 0 0 0 ok 2008-Dec-13 20:06:37 LOG4 got_alfamon: From ALFAMON: ACK 2008-Dec-13 20:06:37 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Dec-13 20:06:37 LOG5 end_task: Level: (4) ID = <10264> Status = 0 0 0 0 ok 2008-Dec-13 20:06:37 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Dec-13 20:06:37 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Dec-13 20:06:37 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Dec-13 20:06:37 LOG5 end_task: Level: (3) ID = <10261> Status = 0 0 0 0 ok 2008-Dec-13 20:06:37 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2008-Dec-13 20:06:37 INFO2 astwait: Waiting for 46 seconds from 00:06:37 to 00:07:23 UTC ... 2008-Dec-13 20:06:37 LOG4 send_obs_status: To obs_status: <1> TASKTIME 46 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Dec-13 20:06:37 START begin_task: Starting task 'waiting on waiting for AST time' 2008-Dec-13 20:06:37 LOG5 begin_task: Level: (3) ID = <10265> Status = 0 0 0 0 ok 2008-Dec-13 20:07:23 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2008-Dec-13 20:07:23 LOG5 end_task: Level: (3) ID = <10265> Status = 0 0 0 0 ok 2008-Dec-13 20:07:23 INFO3 astwait: Finished waiting 2008-Dec-13 20:07:23 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Dec-13 20:07:23 LOG5 dopset_later: Calling 'dopset_later 61.250911191187249' 2008-Dec-13 20:07:23 INFO3 dopset_later: Setting Doppler correction for 20:08:23 (61.3 seconds from now) 2008-Dec-13 20:07:23 LOG5 antvel: Calling 'antvel 190.860000 12.637322 F 61.250911191187249' 2008-Dec-13 20:07:23 LOG2 antvel: Transforming current Az = 190.86 ZA = 12.64 to apparent RA = 01:24:31.3 Dec = +30:44:34.4 2008-Dec-13 20:07:23 LOG2 antvel: Parameters to Doppler: Heliocentric 86903 2008 348 0.0 2008-Dec-13 20:07:23 INFO5 antvel: Computed antenna velocity: +22.15781 km/s 2008-Dec-13 20:07:23 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=22.157811778799999 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Dec-13 20:07:23 INFO4 dopset_gen: New sky frequencies: 1381.141348 1381.141348 1381.141348 1381.141348 1381.141348 1381.141348 1381.141348 1381.141348 1381.141348 2008-Dec-13 20:07:23 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.141348 sky0=1381.141348 sky1=1381.141348 sky2=1381.141348 sky3=1381.141348 sky4=1381.141348 sky5=1381.141348 sky6=1381.141348 sky7=1381.141348 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Dec-13 20:07:23 LOG2 dopset_gen: Result from 'sky2syn': 1631.141348 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Dec-13 20:07:23 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631141348.0} 2008-Dec-13 20:07:23 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-13 20:07:23 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Dec-13 20:07:23 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Dec-13 20:07:23 INFO5 fixed_driftmap: Tracking J2000 position: RA = 01:23:03.0 Dec = +30:41:46.6 2008-Dec-13 20:07:23 LOG3 track_source: Calling 'track_source AGES33PP_p2_080 012303.0 304146.6 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Dec-13 20:07:23 START begin_task: Starting task 'sending tracking commands' 2008-Dec-13 20:07:23 LOG5 begin_task: Level: (3) ID = <10266> Status = 0 0 0 0 ok 2008-Dec-13 20:07:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES33PP_p2_080} INFO {Slewing to source 'AGES33PP_p2_080' ...} 2008-Dec-13 20:07:23 INFO1 track_source: Starting to track AGES33PP_p2_080 2008-Dec-13 20:07:23 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES33PP_p2_080" 2008-Dec-13 20:07:23 LOG3 vw_send: To DATATAKING: set ra 012303.0 2008-Dec-13 20:07:23 LOG3 vw_send: To DATATAKING: set dec 304146.6 2008-Dec-13 20:07:23 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Dec-13 20:07:23 LOG3 vw_send: To DATATAKING: pnt tr 012303.0 304146.6 -CJ 2008-Dec-13 20:07:23 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Dec-13 20:07:23 STOP finish_task: Finishing task 'sending tracking commands' 2008-Dec-13 20:07:23 LOG5 finish_task: Level: (3) ID = <10266> Status = 0 0 0 0 ok 2008-Dec-13 20:07:23 INFO2 finish_task: DONE finished sending: tracking commands 2008-Dec-13 20:07:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-13 20:07:23 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Dec-13 20:07:23 LOG5 end_task: Level: (3) ID = <10266> Status = 0 0 0 0 ok 2008-Dec-13 20:07:23 START begin_task: Starting task 'waiting on telescope' 2008-Dec-13 20:07:23 LOG5 begin_task: Level: (3) ID = <10267> Status = 0 0 0 0 ok 2008-Dec-13 20:07:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Dec-13 20:07:23 LOG3 waittrk: Start waittrk 5 2008-Dec-13 20:07:23 START begin_task: Starting task 'waiting on telescope movement' 2008-Dec-13 20:07:23 LOG5 begin_task: Level: (4) ID = <10268> Status = 0 0 0 0 ok 2008-Dec-13 20:07:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631141348.0} 2008-Dec-13 20:07:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Dec-13 20:07:23 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES33PP_p2_080" 2008-Dec-13 20:07:23 LOG4 got_cormsg: From DATATAKING: set ra 012303.0 2008-Dec-13 20:07:23 LOG4 got_cormsg: From DATATAKING: set dec 304146.6 2008-Dec-13 20:07:23 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Dec-13 20:07:23 LOG4 got_cormsg: From DATATAKING: vw% 012303.0 2008-Dec-13 20:07:23 LOG4 got_cormsg: From DATATAKING: vw% 304146.6 2008-Dec-13 20:07:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 20:07:23 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Dec-13 20:07:23 LOG4 got_cormsg: From DATATAKING: pnt tr 012303.0 304146.6 -CJ 2008-Dec-13 20:07:23 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Dec-13 20:07:23 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Dec-13 20:07:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 20:07:28 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Dec-13 20:07:28 LOG5 end_task: Level: (4) ID = <10268> Status = 0 0 0 0 ok 2008-Dec-13 20:07:28 START begin_task: Starting task 'waiting on telescope on source' 2008-Dec-13 20:07:28 LOG5 begin_task: Level: (4) ID = <10269> Status = 0 0 0 0 ok 2008-Dec-13 20:07:30 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Dec-13 20:07:30 LOG5 end_task: Level: (4) ID = <10269> Status = 0 0 0 0 ok 2008-Dec-13 20:07:30 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Dec-13 20:07:30 INFO2 waittrk: Now tracking AGES33PP_p2_080 2008-Dec-13 20:07:30 LOG4 waittrk: Current telescope position: Az = 550.48 ZA = 12.67 2008-Dec-13 20:07:30 STOP finish_task: Finishing task 'waiting on telescope' 2008-Dec-13 20:07:30 LOG5 finish_task: Level: (3) ID = <10267> Status = 0 0 0 0 ok 2008-Dec-13 20:07:30 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Dec-13 20:07:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-13 20:07:30 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Dec-13 20:07:30 LOG5 end_task: Level: (3) ID = <10267> Status = 0 0 0 0 ok 2008-Dec-13 20:07:30 START begin_task: Starting task 'adjusting WAPP power' 2008-Dec-13 20:07:30 LOG5 begin_task: Level: (3) ID = <10270> Status = 0 0 0 0 ok 2008-Dec-13 20:07:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Dec-13 20:07:30 INFO2 adjust_power: Starting to adjust WAPP power 2008-Dec-13 20:07:30 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Dec-13 20:07:30 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Dec-13 20:07:30 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Dec-13 20:07:30 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Dec-13 20:07:30 LOG5 begin_task: Level: (4) ID = <10271> Status = 0 0 0 0 ok 2008-Dec-13 20:07:30 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Dec-13 20:07:30 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Dec-13 20:07:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 20:07:33 LOG4 got_cormsg: From DATATAKING: DONE 2008-Dec-13 20:07:33 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Dec-13 20:07:33 LOG5 end_task: Level: (4) ID = <10271> Status = 0 0 0 0 ok 2008-Dec-13 20:07:33 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Dec-13 20:07:33 START begin_task: Starting task 'adjusting WAPP power' 2008-Dec-13 20:07:33 LOG5 begin_task: Level: (4) ID = <10272> Status = 0 0 0 0 ok 2008-Dec-13 20:07:33 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Dec-13 20:07:33 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Dec-13 20:07:33 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Dec-13 20:07:33 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Dec-13 20:07:33 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Dec-13 20:07:33 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Dec-13 20:07:33 LOG5 begin_task: Level: (5) ID = <10273> Status = 0 0 0 0 ok 2008-Dec-13 20:07:34 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Dec-13 20:07:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 20:07:34 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 7 7 dB 2008-Dec-13 20:07:34 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 1 dB --- beam 5: 6 5 dB 2008-Dec-13 20:07:34 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Dec-13 20:07:34 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2008-Dec-13 20:07:34 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Dec-13 20:07:34 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Dec-13 20:07:34 LOG5 end_task: Level: (5) ID = <10273> Status = 0 0 0 0 ok 2008-Dec-13 20:07:34 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.000 1.016 ALFA beam 1: 0.984 0.907 2008-Dec-13 20:07:34 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.060 1.005 ALFA beam 3: 0.899 0.930 2008-Dec-13 20:07:34 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.919 0.965 ALFA beam 5: 0.899 1.040 2008-Dec-13 20:07:34 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.028 0.106 ALFA beam 7: 0.906 0.118 2008-Dec-13 20:07:34 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Dec-13 20:07:34 LOG5 finish_task: Level: (4) ID = <10272> Status = 0 0 0 0 ok 2008-Dec-13 20:07:34 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Dec-13 20:07:34 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-13 20:07:34 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Dec-13 20:07:34 LOG5 end_task: Level: (4) ID = <10272> Status = 0 0 0 0 ok 2008-Dec-13 20:07:34 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Dec-13 20:07:34 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Dec-13 20:07:34 LOG5 finish_task: Level: (3) ID = <10270> Status = 0 0 0 0 ok 2008-Dec-13 20:07:34 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Dec-13 20:07:34 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-13 20:07:34 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Dec-13 20:07:34 LOG5 end_task: Level: (3) ID = <10270> Status = 0 0 0 0 ok 2008-Dec-13 20:07:34 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Matthew Smith 2008-Dec-13 20:07:34 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Matthew Smith 2008-Dec-13 20:07:34 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Matthew Smith 2008-Dec-13 20:07:34 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Matthew Smith 2008-Dec-13 20:07:34 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Dec-13 20:07:34 START begin_task: Starting task 'WAPP calibration' 2008-Dec-13 20:07:34 LOG5 begin_task: Level: (3) ID = <10274> Status = 0 0 0 0 ok 2008-Dec-13 20:07:34 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Dec-13 20:07:34 START begin_task: Starting task 'selecting calibration type' 2008-Dec-13 20:07:34 LOG5 begin_task: Level: (4) ID = <10275> Status = 0 0 0 0 ok 2008-Dec-13 20:07:34 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Dec-13 20:07:34 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Dec-13 20:07:34 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Dec-13 20:07:34 START begin_task: Starting task 'waiting on setcal' 2008-Dec-13 20:07:34 LOG5 begin_task: Level: (5) ID = <10276> Status = 0 0 0 0 ok 2008-Dec-13 20:07:34 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Matthew Smith' 2008-Dec-13 20:07:34 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Dec-13 20:07:34 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Dec-13 20:07:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 20:07:35 LOG4 got_cormsg: From DATATAKING: DONE 2008-Dec-13 20:07:35 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Dec-13 20:07:35 LOG5 end_task: Level: (5) ID = <10276> Status = 0 0 0 0 ok 2008-Dec-13 20:07:35 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Dec-13 20:07:35 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Dec-13 20:07:35 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Dec-13 20:07:35 START begin_task: Starting task 'waiting on command to ALFA' 2008-Dec-13 20:07:35 LOG5 begin_task: Level: (5) ID = <10277> Status = 0 0 0 0 ok 2008-Dec-13 20:07:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 20:07:35 LOG4 got_alfamon: From ALFAMON: ACK 2008-Dec-13 20:07:35 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Dec-13 20:07:35 LOG5 end_task: Level: (5) ID = <10277> Status = 0 0 0 0 ok 2008-Dec-13 20:07:35 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Dec-13 20:07:35 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Dec-13 20:07:35 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Dec-13 20:07:35 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Dec-13 20:07:35 START begin_task: Starting task 'waiting on command to ALFA' 2008-Dec-13 20:07:35 LOG5 begin_task: Level: (5) ID = <10278> Status = 0 0 0 0 ok 2008-Dec-13 20:07:35 NOTE WAPPDATA-new_file: New FITS file: wapp.20081213.a2048.0005.fits 2008-Dec-13 20:07:35 LOG4 got_alfamon: From ALFAMON: ACK 2008-Dec-13 20:07:35 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Dec-13 20:07:35 LOG5 end_task: Level: (5) ID = <10278> Status = 0 0 0 0 ok 2008-Dec-13 20:07:35 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Dec-13 20:07:35 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Dec-13 20:07:35 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Dec-13 20:07:35 LOG5 end_task: Level: (4) ID = <10275> Status = 0 0 0 0 ok 2008-Dec-13 20:07:35 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Dec-13 20:07:35 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Dec-13 20:07:35 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Dec-13 20:07:35 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Dec-13 20:07:35 LOG5 begin_task: Level: (4) ID = <10279> Status = 0 0 0 0 ok 2008-Dec-13 20:07:35 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081213.a2048.0005.fits} 2008-Dec-13 20:07:35 LOG3 CALCONTROL-caltrig: Software trigger 2008-Dec-13 20:07:35 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Dec-13 20:07:35 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Dec-13 20:07:35 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Dec-13 20:07:35 LOG5 end_task: Level: (4) ID = <10279> Status = 0 0 0 0 ok 2008-Dec-13 20:07:35 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Dec-13 20:07:35 LOG4 take_data: Calling 'take_data 5 5 CAL ON -' 2008-Dec-13 20:07:35 START begin_task: Starting task 'WAPP spectral observation' 2008-Dec-13 20:07:35 LOG5 begin_task: Level: (4) ID = <10280> Status = 0 0 0 0 ok 2008-Dec-13 20:07:35 LOG5 log_alfabeam: Parameters: 1.3841666666666665 30.696277777777773 1.212033 2008.9550680343245 8.799917 2008-Dec-13 20:07:35 LOG4 log_alfabeam: ALFABEAM 0 1.384166666666646 30.696277777777798 2008-Dec-13 20:07:35 LOG4 log_alfabeam: ALFABEAM 1 1.385075915244545 30.592178881946165 2008-Dec-13 20:07:35 LOG4 log_alfabeam: ALFABEAM 2 1.390746499507452 30.661491851527920 2008-Dec-13 20:07:35 LOG4 log_alfabeam: ALFABEAM 3 1.389862527295412 30.765695770158672 2008-Dec-13 20:07:35 LOG4 log_alfabeam: ALFABEAM 4 1.383215198618115 30.800396693029789 2008-Dec-13 20:07:35 LOG4 log_alfabeam: ALFABEAM 5 1.377554612395511 30.730413621984454 2008-Dec-13 20:07:35 LOG4 log_alfabeam: ALFABEAM 6 1.378531216146464 30.626402533303839 2008-Dec-13 20:07:35 INFO2 take_data: Starting WAPP scan: 834800071 2008-Dec-13 20:07:36 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Dec-13 20:07:36 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Dec-13 20:07:36 LOG5 begin_task: Level: (5) ID = <10281> Status = 0 0 0 0 ok 2008-Dec-13 20:07:36 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Dec-13 20:07:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2008-Dec-13 20:07:36 LOG4 check_wapp_levels: WAPP-1 power levels: 1.000 1.016 0.984 0.907 2008-Dec-13 20:07:36 LOG4 check_wapp_levels: WAPP-2 power levels: 1.060 1.005 0.899 0.930 2008-Dec-13 20:07:36 LOG4 check_wapp_levels: WAPP-3 power levels: 0.919 0.965 0.899 1.040 2008-Dec-13 20:07:36 LOG4 check_wapp_levels: WAPP-4 power levels: 1.028 0.106 0.906 0.118 2008-Dec-13 20:07:36 INFO1 WAPP=1+2+3+4-start_spectra: start sec 457.00 2008-Dec-13 20:07:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.141348 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Dec-13 20:07:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.141348 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 20:07:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.141348 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 20:07:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.141348 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Dec-13 20:07:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.141348 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 20:07:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.141348 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Dec-13 20:07:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.141348 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Dec-13 20:07:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.141348 MHz Flip = 1 Band = 0 Mixer = 1990.000000 MHz 2008-Dec-13 20:07:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.141348 MHz Flip = 1 Band = 0 Mixer = 2000.000000 MHz 2008-Dec-13 20:07:42 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.410 (still bad) 2008-Dec-13 20:07:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Dec-13 20:07:42 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Dec-13 20:07:42 LOG5 end_task: Level: (5) ID = <10281> Status = 0 0 0 0 ok 2008-Dec-13 20:07:42 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Dec-13 20:07:42 LOG5 end_task: Level: (4) ID = <10280> Status = 0 0 0 0 ok 2008-Dec-13 20:07:42 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Dec-13 20:07:42 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Dec-13 20:07:42 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Dec-13 20:07:42 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Dec-13 20:07:42 LOG5 begin_task: Level: (4) ID = <10282> Status = 0 0 0 0 ok 2008-Dec-13 20:07:42 LOG3 CALCONTROL-caltrig: Software trigger 2008-Dec-13 20:07:42 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Dec-13 20:07:42 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Dec-13 20:07:42 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Dec-13 20:07:42 LOG5 end_task: Level: (4) ID = <10282> Status = 0 0 0 0 ok 2008-Dec-13 20:07:42 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Dec-13 20:07:42 LOG4 take_data: Calling 'take_data 5 5 CAL OFF -' 2008-Dec-13 20:07:42 START begin_task: Starting task 'WAPP spectral observation' 2008-Dec-13 20:07:42 LOG5 begin_task: Level: (4) ID = <10283> Status = 0 0 0 0 ok 2008-Dec-13 20:07:42 LOG5 log_alfabeam: Parameters: 1.3841666666666665 30.696277777777773 1.213983 2008.9550682561412 8.799917 2008-Dec-13 20:07:42 LOG4 log_alfabeam: ALFABEAM 0 1.384166666666649 30.696277777777784 2008-Dec-13 20:07:42 LOG4 log_alfabeam: ALFABEAM 1 1.385093466642730 30.592204680135893 2008-Dec-13 20:07:42 LOG4 log_alfabeam: ALFABEAM 2 1.390752357123883 30.661676685478035 2008-Dec-13 20:07:42 LOG4 log_alfabeam: ALFABEAM 3 1.389850797314635 30.765855555598083 2008-Dec-13 20:07:42 LOG4 log_alfabeam: ALFABEAM 4 1.383197589397400 30.800369716586491 2008-Dec-13 20:07:42 LOG4 log_alfabeam: ALFABEAM 5 1.377548861684719 30.730227642748588 2008-Dec-13 20:07:42 LOG4 log_alfabeam: ALFABEAM 6 1.378543037463627 30.626244278133449 2008-Dec-13 20:07:42 INFO2 take_data: Starting WAPP scan: 834800072 2008-Dec-13 20:07:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Dec-13 20:07:43 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Dec-13 20:07:43 LOG5 begin_task: Level: (5) ID = <10284> Status = 0 0 0 0 ok 2008-Dec-13 20:07:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Dec-13 20:07:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 464.00 2008-Dec-13 20:07:48 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.458 (still bad) 2008-Dec-13 20:07:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.141348 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Dec-13 20:07:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.141348 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 20:07:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.141348 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 20:07:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.141348 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Dec-13 20:07:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.141348 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 20:07:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.141348 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Dec-13 20:07:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.141348 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Dec-13 20:07:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.141348 MHz Flip = 1 Band = 0 Mixer = 1990.000000 MHz 2008-Dec-13 20:07:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.141348 MHz Flip = 1 Band = 0 Mixer = 2000.000000 MHz 2008-Dec-13 20:07:49 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Dec-13 20:07:49 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Dec-13 20:07:49 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Dec-13 20:07:49 LOG5 end_task: Level: (5) ID = <10284> Status = 0 0 0 0 ok 2008-Dec-13 20:07:49 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Dec-13 20:07:49 LOG5 end_task: Level: (4) ID = <10283> Status = 0 0 0 0 ok 2008-Dec-13 20:07:49 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Dec-13 20:07:49 STOP finish_task: Finishing task 'WAPP calibration' 2008-Dec-13 20:07:49 LOG5 finish_task: Level: (3) ID = <10274> Status = 0 0 0 0 ok 2008-Dec-13 20:07:49 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Dec-13 20:07:49 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-13 20:07:49 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Dec-13 20:07:49 LOG5 end_task: Level: (3) ID = <10274> Status = 0 0 0 0 ok 2008-Dec-13 20:07:50 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Dec-13 20:07:50 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 190.86 and ZA = 12.64 2008-Dec-13 20:07:50 LOG3 track_source: Calling 'track_source AGES33PP_p2_080 190.86 12.6373222581 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Dec-13 20:07:50 START begin_task: Starting task 'sending tracking commands' 2008-Dec-13 20:07:50 LOG5 begin_task: Level: (3) ID = <10285> Status = 0 0 0 0 ok 2008-Dec-13 20:07:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES33PP_p2_080} INFO {Slewing to source 'AGES33PP_p2_080' ...} 2008-Dec-13 20:07:50 INFO1 track_source: Starting to track AGES33PP_p2_080 2008-Dec-13 20:07:50 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES33PP_p2_080" 2008-Dec-13 20:07:50 LOG3 vw_send: To DATATAKING: set ra 190.86 2008-Dec-13 20:07:50 LOG3 vw_send: To DATATAKING: set dec 12.6373222581 2008-Dec-13 20:07:50 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Dec-13 20:07:50 LOG3 vw_send: To DATATAKING: pnt tr 190.86 12.6373222581 -CF 2008-Dec-13 20:07:50 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Dec-13 20:07:50 STOP finish_task: Finishing task 'sending tracking commands' 2008-Dec-13 20:07:50 LOG5 finish_task: Level: (3) ID = <10285> Status = 0 0 0 0 ok 2008-Dec-13 20:07:50 INFO2 finish_task: DONE finished sending: tracking commands 2008-Dec-13 20:07:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Dec-13 20:07:50 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Dec-13 20:07:50 LOG5 end_task: Level: (3) ID = <10285> Status = 0 0 0 0 ok 2008-Dec-13 20:07:50 LOG1 fixed_driftmap: Parameters: HA = -00:10:59.7 Start = 01:13:31.7 LST = 01:12:57.4 diff = 34.3 secs 2008-Dec-13 20:07:50 INFO2 fixed_driftmap: Waiting 32.3 seconds for RA 1:24:31 2008-Dec-13 20:07:50 INFO2 lstwait: Waiting for 32.3 secs from LST 01:12:57 to LST 01:13:30 ... 2008-Dec-13 20:07:50 LOG4 send_obs_status: To obs_status: <1> TASKTIME 32.254699209427336 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Dec-13 20:07:50 START begin_task: Starting task 'waiting on wait on LST' 2008-Dec-13 20:07:50 LOG5 begin_task: Level: (3) ID = <10286> Status = 0 0 0 0 ok 2008-Dec-13 20:07:50 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES33PP_p2_080" 2008-Dec-13 20:07:50 LOG4 got_cormsg: From DATATAKING: set ra 190.86 2008-Dec-13 20:07:50 LOG4 got_cormsg: From DATATAKING: set dec 12.6373222581 2008-Dec-13 20:07:50 LOG4 got_cormsg: From DATATAKING: vw% 190.86 2008-Dec-13 20:07:50 LOG4 got_cormsg: From DATATAKING: vw% 12.6373222581 2008-Dec-13 20:07:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 20:07:50 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Dec-13 20:07:50 LOG4 got_cormsg: From DATATAKING: pnt tr 190.86 12.6373222581 -CF 2008-Dec-13 20:07:50 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Dec-13 20:07:50 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Dec-13 20:07:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 20:07:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.063 (still bad) 2008-Dec-13 20:08:22 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Dec-13 20:08:22 LOG5 end_task: Level: (3) ID = <10286> Status = 0 0 0 0 ok 2008-Dec-13 20:08:22 LOG4 lstwait: Finished waiting 0.74 seconds late 2008-Dec-13 20:08:22 INFO3 lstwait: Finished waiting 2008-Dec-13 20:08:22 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Dec-13 20:08:22 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Dec-13 20:08:22 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Dec-13 20:08:22 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Dec-13 20:08:22 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Dec-13 20:08:22 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ -' 2008-Dec-13 20:08:22 START begin_task: Starting task 'WAPP spectral observation' 2008-Dec-13 20:08:22 LOG5 begin_task: Level: (3) ID = <10287> Status = 0 0 0 0 ok 2008-Dec-13 20:08:22 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Dec-13 20:08:22 INFO2 take_data: Starting WAPP scan: 834800073 2008-Dec-13 20:08:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Dec-13 20:08:23 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Dec-13 20:08:23 LOG5 begin_task: Level: (4) ID = <10288> Status = 0 0 0 0 ok 2008-Dec-13 20:08:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Dec-13 20:08:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 504.00 2008-Dec-13 20:08:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.141348 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Dec-13 20:08:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.141348 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 20:08:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.141348 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 20:08:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.141348 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Dec-13 20:08:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.141348 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Dec-13 20:08:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.141348 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Dec-13 20:08:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.141348 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Dec-13 20:08:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.141348 MHz Flip = 1 Band = 0 Mixer = 1990.000000 MHz 2008-Dec-13 20:08:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.141348 MHz Flip = 1 Band = 0 Mixer = 2000.000000 MHz 2008-Dec-13 20:08:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.063 (still bad) 2008-Dec-13 20:08:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.059 (still bad) 2008-Dec-13 20:08:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.061 (still bad) 2008-Dec-13 20:08:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.061 (still bad) 2008-Dec-13 20:08:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.059 (still bad) 2008-Dec-13 20:08:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.061 (still bad) 2008-Dec-13 20:08:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2008-Dec-13 20:08:37 LOG4 check_wapp_levels: WAPP-1 power levels: 0.994 1.009 0.991 0.915 2008-Dec-13 20:08:37 LOG4 check_wapp_levels: WAPP-2 power levels: 1.061 1.006 0.898 0.931 2008-Dec-13 20:08:37 LOG4 check_wapp_levels: WAPP-3 power levels: 0.921 0.965 0.901 1.042 2008-Dec-13 20:08:37 LOG4 check_wapp_levels: WAPP-4 power levels: 1.034 0.107 0.912 0.118 2008-Dec-13 20:08:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.059 (still bad) 2008-Dec-13 20:08:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.059 (still bad) 2008-Dec-13 20:08:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.060 (still bad) 2008-Dec-13 20:08:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.060 (still bad) 2008-Dec-13 20:08:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.061 (still bad) 2008-Dec-13 20:08:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.061 (still bad) 2008-Dec-13 20:08:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.057 (still bad) 2008-Dec-13 20:08:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.061 (still bad) 2008-Dec-13 20:08:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.059 (still bad) 2008-Dec-13 20:08:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.058 (still bad) 2008-Dec-13 20:08:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.059 (still bad) 2008-Dec-13 20:09:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.060 (still bad) 2008-Dec-13 20:09:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.060 (still bad) 2008-Dec-13 20:09:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.060 (still bad) 2008-Dec-13 20:09:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.059 (still bad) 2008-Dec-13 20:09:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.059 (still bad) 2008-Dec-13 20:09:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.060 (still bad) 2008-Dec-13 20:09:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.061 (still bad) 2008-Dec-13 20:09:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.060 (still bad) 2008-Dec-13 20:09:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.059 (still bad) 2008-Dec-13 20:09:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.061 (still bad) 2008-Dec-13 20:09:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.061 (still bad) 2008-Dec-13 20:09:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.057 (still bad) 2008-Dec-13 20:09:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.061 (still bad) 2008-Dec-13 20:09:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.059 (still bad) 2008-Dec-13 20:09:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.060 (still bad) 2008-Dec-13 20:09:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.063 (still bad) 2008-Dec-13 20:09:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.060 (still bad) 2008-Dec-13 20:09:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.058 (still bad) 2008-Dec-13 20:09:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2008-Dec-13 20:09:38 LOG4 check_wapp_levels: WAPP-1 power levels: 0.984 1.004 0.984 0.906 2008-Dec-13 20:09:38 LOG4 check_wapp_levels: WAPP-2 power levels: 1.061 1.005 0.897 0.930 2008-Dec-13 20:09:38 LOG4 check_wapp_levels: WAPP-3 power levels: 0.914 0.960 0.890 1.034 2008-Dec-13 20:09:38 LOG4 check_wapp_levels: WAPP-4 power levels: 1.027 0.106 0.906 0.117 2008-Dec-13 20:09:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.061 (still bad) 2008-Dec-13 20:09:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.058 (still bad) 2008-Dec-13 20:09:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.057 (still bad) 2008-Dec-13 20:09:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.060 (still bad) 2008-Dec-13 20:09:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.061 (still bad) 2008-Dec-13 20:09:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.060 (still bad) 2008-Dec-13 20:09:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.059 (still bad) 2008-Dec-13 20:09:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.058 (still bad) 2008-Dec-13 20:09:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.059 (still bad) 2008-Dec-13 20:09:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.059 (still bad) 2008-Dec-13 20:10:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.059 (still bad) 2008-Dec-13 20:10:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.059 (still bad) 2008-Dec-13 20:10:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.058 (still bad) 2008-Dec-13 20:10:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.057 (still bad) 2008-Dec-13 20:10:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.058 (still bad) 2008-Dec-13 20:10:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.058 (still bad) 2008-Dec-13 20:10:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.060 (still bad) 2008-Dec-13 20:10:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.062 (still bad) 2008-Dec-13 20:10:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.059 (still bad) 2008-Dec-13 20:10:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.063 (still bad) 2008-Dec-13 20:10:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.061 (still bad) 2008-Dec-13 20:10:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.060 (still bad) 2008-Dec-13 20:10:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.067 (still bad) 2008-Dec-13 20:10:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.061 (still bad) 2008-Dec-13 20:10:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.059 (still bad) 2008-Dec-13 20:10:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.066 (still bad) 2008-Dec-13 20:10:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.061 (still bad) 2008-Dec-13 20:10:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.063 (still bad) 2008-Dec-13 20:10:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.067 (still bad) 2008-Dec-13 20:10:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.062 (still bad) 2008-Dec-13 20:10:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2008-Dec-13 20:10:40 LOG4 check_wapp_levels: WAPP-1 power levels: 0.984 1.001 0.983 0.906 2008-Dec-13 20:10:40 LOG4 check_wapp_levels: WAPP-2 power levels: 1.062 1.002 0.898 0.929 2008-Dec-13 20:10:40 LOG4 check_wapp_levels: WAPP-3 power levels: 0.915 0.959 0.889 1.033 2008-Dec-13 20:10:40 LOG4 check_wapp_levels: WAPP-4 power levels: 1.025 0.106 0.903 0.117 2008-Dec-13 20:10:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.064 (still bad) 2008-Dec-13 20:10:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.060 (still bad) 2008-Dec-13 20:10:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.063 (still bad) 2008-Dec-13 20:10:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.066 (still bad) 2008-Dec-13 20:10:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.061 (still bad) 2008-Dec-13 20:10:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.061 (still bad) 2008-Dec-13 20:10:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.061 (still bad) 2008-Dec-13 20:10:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.060 (still bad) 2008-Dec-13 20:10:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.062 (still bad) 2008-Dec-13 20:11:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.069 (still bad) 2008-Dec-13 20:11:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.063 (still bad) 2008-Dec-13 20:11:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.060 (still bad) 2008-Dec-13 20:11:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.064 (still bad) 2008-Dec-13 20:11:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.061 (still bad) 2008-Dec-13 20:11:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.060 (still bad) 2008-Dec-13 20:11:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.067 (still bad) 2008-Dec-13 20:11:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.062 (still bad) 2008-Dec-13 20:11:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.063 (still bad) 2008-Dec-13 20:11:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.064 (still bad) 2008-Dec-13 20:11:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.061 (still bad) 2008-Dec-13 20:11:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.062 (still bad) 2008-Dec-13 20:11:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.070 (still bad) 2008-Dec-13 20:11:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.066 (still bad) 2008-Dec-13 20:11:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.061 (still bad) 2008-Dec-13 20:11:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.066 (still bad) 2008-Dec-13 20:11:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.061 (still bad) 2008-Dec-13 20:11:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.060 (still bad) 2008-Dec-13 20:11:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.070 (still bad) 2008-Dec-13 20:11:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.064 (still bad) 2008-Dec-13 20:11:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2008-Dec-13 20:11:41 LOG4 check_wapp_levels: WAPP-1 power levels: 0.983 1.003 0.981 0.907 2008-Dec-13 20:11:41 LOG4 check_wapp_levels: WAPP-2 power levels: 1.064 1.002 0.897 0.929 2008-Dec-13 20:11:41 LOG4 check_wapp_levels: WAPP-3 power levels: 0.913 0.961 0.890 1.032 2008-Dec-13 20:11:41 LOG4 check_wapp_levels: WAPP-4 power levels: 1.028 0.106 0.906 0.117 2008-Dec-13 20:11:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.066 (still bad) 2008-Dec-13 20:11:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.064 (still bad) 2008-Dec-13 20:11:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.064 (still bad) 2008-Dec-13 20:11:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.072 (still bad) 2008-Dec-13 20:11:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.066 (still bad) 2008-Dec-13 20:11:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.064 (still bad) 2008-Dec-13 20:11:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.066 (still bad) 2008-Dec-13 20:11:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.064 (still bad) 2008-Dec-13 20:11:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.067 (still bad) 2008-Dec-13 20:12:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.067 (still bad) 2008-Dec-13 20:12:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.065 (still bad) 2008-Dec-13 20:12:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.064 (still bad) 2008-Dec-13 20:12:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.064 (still bad) 2008-Dec-13 20:12:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.066 (still bad) 2008-Dec-13 20:12:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.065 (still bad) 2008-Dec-13 20:12:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.067 (still bad) 2008-Dec-13 20:12:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.065 (still bad) 2008-Dec-13 20:12:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.062 (still bad) 2008-Dec-13 20:12:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.064 (still bad) 2008-Dec-13 20:12:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.063 (still bad) 2008-Dec-13 20:12:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.065 (still bad) 2008-Dec-13 20:12:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.067 (still bad) 2008-Dec-13 20:12:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.063 (still bad) 2008-Dec-13 20:12:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.062 (still bad) 2008-Dec-13 20:12:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.063 (still bad) 2008-Dec-13 20:12:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.063 (still bad) 2008-Dec-13 20:12:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.063 (still bad) 2008-Dec-13 20:12:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.067 (still bad) 2008-Dec-13 20:12:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.061 (still bad) 2008-Dec-13 20:12:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2008-Dec-13 20:12:42 LOG4 check_wapp_levels: WAPP-1 power levels: 0.982 1.002 0.981 0.905 2008-Dec-13 20:12:42 LOG4 check_wapp_levels: WAPP-2 power levels: 1.062 0.998 0.895 0.929 2008-Dec-13 20:12:42 LOG4 check_wapp_levels: WAPP-3 power levels: 0.915 0.960 0.889 1.032 2008-Dec-13 20:12:42 LOG4 check_wapp_levels: WAPP-4 power levels: 1.029 0.106 0.906 0.117 2008-Dec-13 20:12:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.063 (still bad) 2008-Dec-13 20:12:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.063 (still bad) 2008-Dec-13 20:12:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.062 (still bad) 2008-Dec-13 20:12:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.069 (still bad) 2008-Dec-13 20:12:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.061 (still bad) 2008-Dec-13 20:12:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.062 (still bad) 2008-Dec-13 20:12:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.065 (still bad) 2008-Dec-13 20:12:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.059 (still bad) 2008-Dec-13 20:13:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.063 (still bad) 2008-Dec-13 20:13:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.068 (still bad) 2008-Dec-13 20:13:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.062 (still bad) 2008-Dec-13 20:13:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.061 (still bad) 2008-Dec-13 20:13:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.063 (still bad) 2008-Dec-13 20:13:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.063 (still bad) 2008-Dec-13 20:13:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.064 (still bad) 2008-Dec-13 20:13:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.068 (still bad) 2008-Dec-13 20:13:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.062 (still bad) 2008-Dec-13 20:13:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.061 (still bad) 2008-Dec-13 20:13:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.064 (still bad) 2008-Dec-13 20:13:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.060 (still bad) 2008-Dec-13 20:13:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.064 (still bad) 2008-Dec-13 20:13:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.066 (still bad) 2008-Dec-13 20:13:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.060 (still bad) 2008-Dec-13 20:13:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.059 (still bad) 2008-Dec-13 20:13:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.061 (still bad) 2008-Dec-13 20:13:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.060 (still bad) 2008-Dec-13 20:13:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.063 (still bad) 2008-Dec-13 20:13:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.064 (still bad) 2008-Dec-13 20:13:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.060 (still bad) 2008-Dec-13 20:13:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.063 (still bad) 2008-Dec-13 20:13:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2008-Dec-13 20:13:44 LOG4 check_wapp_levels: WAPP-1 power levels: 0.981 1.001 0.983 0.906 2008-Dec-13 20:13:44 LOG4 check_wapp_levels: WAPP-2 power levels: 1.061 0.997 0.902 0.931 2008-Dec-13 20:13:44 LOG4 check_wapp_levels: WAPP-3 power levels: 0.915 0.962 0.890 1.032 2008-Dec-13 20:13:44 LOG4 check_wapp_levels: WAPP-4 power levels: 1.026 0.106 0.903 0.117 2008-Dec-13 20:13:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.063 (still bad) 2008-Dec-13 20:13:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.061 (still bad) 2008-Dec-13 20:13:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.063 (still bad) 2008-Dec-13 20:13:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.063 (still bad) 2008-Dec-13 20:13:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.062 (still bad) 2008-Dec-13 20:13:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.062 (still bad) 2008-Dec-13 20:13:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.062 (still bad) 2008-Dec-13 20:14:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.062 (still bad) 2008-Dec-13 20:14:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.062 (still bad) 2008-Dec-13 20:14:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.062 (still bad) 2008-Dec-13 20:14:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.064 (still bad) 2008-Dec-13 20:14:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.061 (still bad) 2008-Dec-13 20:14:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.060 (still bad) 2008-Dec-13 20:14:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.062 (still bad) 2008-Dec-13 20:14:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.063 (still bad) 2008-Dec-13 20:14:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.062 (still bad) 2008-Dec-13 20:14:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.063 (still bad) 2008-Dec-13 20:14:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.061 (still bad) 2008-Dec-13 20:14:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.061 (still bad) 2008-Dec-13 20:14:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.061 (still bad) 2008-Dec-13 20:14:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.062 (still bad) 2008-Dec-13 20:14:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.060 (still bad) 2008-Dec-13 20:14:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.062 (still bad) 2008-Dec-13 20:14:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.060 (still bad) 2008-Dec-13 20:14:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.059 (still bad) 2008-Dec-13 20:14:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.062 (still bad) 2008-Dec-13 20:14:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.063 (still bad) 2008-Dec-13 20:14:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.062 (still bad) 2008-Dec-13 20:14:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.062 (still bad) 2008-Dec-13 20:14:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2008-Dec-13 20:14:45 LOG4 check_wapp_levels: WAPP-1 power levels: 0.982 1.002 0.979 0.903 2008-Dec-13 20:14:45 LOG4 check_wapp_levels: WAPP-2 power levels: 1.061 0.996 0.895 0.928 2008-Dec-13 20:14:45 LOG4 check_wapp_levels: WAPP-3 power levels: 0.913 0.958 0.888 1.032 2008-Dec-13 20:14:45 LOG4 check_wapp_levels: WAPP-4 power levels: 1.024 0.106 0.903 0.117 2008-Dec-13 20:14:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.062 (still bad) 2008-Dec-13 20:14:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.061 (still bad) 2008-Dec-13 20:14:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.063 (still bad) 2008-Dec-13 20:14:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.062 (still bad) 2008-Dec-13 20:14:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.063 (still bad) 2008-Dec-13 20:14:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.063 (still bad) 2008-Dec-13 20:14:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.059 (still bad) 2008-Dec-13 20:15:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.062 (still bad) 2008-Dec-13 20:15:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.062 (still bad) 2008-Dec-13 20:15:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.060 (still bad) 2008-Dec-13 20:15:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.063 (still bad) 2008-Dec-13 20:15:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.061 (still bad) 2008-Dec-13 20:15:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.061 (still bad) 2008-Dec-13 20:15:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.061 (still bad) 2008-Dec-13 20:15:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.061 (still bad) 2008-Dec-13 20:15:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.060 (still bad) 2008-Dec-13 20:15:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.062 (still bad) 2008-Dec-13 20:15:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.061 (still bad) 2008-Dec-13 20:15:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.062 (still bad) 2008-Dec-13 20:15:25 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.068 (still bad) 2008-Dec-13 20:15:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.063 (still bad) 2008-Dec-13 20:15:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.059 (still bad) 2008-Dec-13 20:15:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.062 (still bad) 2008-Dec-13 20:15:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.061 (still bad) 2008-Dec-13 20:15:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.062 (still bad) 2008-Dec-13 20:15:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.069 (still bad) 2008-Dec-13 20:15:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.062 (still bad) 2008-Dec-13 20:15:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.062 (still bad) 2008-Dec-13 20:15:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.063 (still bad) 2008-Dec-13 20:15:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2008-Dec-13 20:15:46 LOG4 check_wapp_levels: WAPP-1 power levels: 0.979 0.998 0.979 0.901 2008-Dec-13 20:15:46 LOG4 check_wapp_levels: WAPP-2 power levels: 1.063 0.999 0.900 0.929 2008-Dec-13 20:15:46 LOG4 check_wapp_levels: WAPP-3 power levels: 0.913 0.955 0.889 1.029 2008-Dec-13 20:15:46 LOG4 check_wapp_levels: WAPP-4 power levels: 1.025 0.106 0.903 0.117 2008-Dec-13 20:15:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.064 (still bad) 2008-Dec-13 20:15:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.065 (still bad) 2008-Dec-13 20:15:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.063 (still bad) 2008-Dec-13 20:15:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.064 (still bad) 2008-Dec-13 20:15:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.065 (still bad) 2008-Dec-13 20:15:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.065 (still bad) 2008-Dec-13 20:16:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.068 (still bad) 2008-Dec-13 20:16:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.067 (still bad) 2008-Dec-13 20:16:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.067 (still bad) 2008-Dec-13 20:16:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.069 (still bad) 2008-Dec-13 20:16:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.068 (still bad) 2008-Dec-13 20:16:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.066 (still bad) 2008-Dec-13 20:16:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.067 (still bad) 2008-Dec-13 20:16:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.068 (still bad) 2008-Dec-13 20:16:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.067 (still bad) 2008-Dec-13 20:16:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.069 (still bad) 2008-Dec-13 20:16:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.068 (still bad) 2008-Dec-13 20:16:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.068 (still bad) 2008-Dec-13 20:16:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.068 (still bad) 2008-Dec-13 20:16:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.070 (still bad) 2008-Dec-13 20:16:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.069 (still bad) 2008-Dec-13 20:16:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.069 (still bad) 2008-Dec-13 20:16:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.072 (still bad) 2008-Dec-13 20:16:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.073 (still bad) 2008-Dec-13 20:16:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.074 (still bad) 2008-Dec-13 20:16:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.075 (still bad) 2008-Dec-13 20:16:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.074 (still bad) 2008-Dec-13 20:16:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.075 (still bad) 2008-Dec-13 20:16:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.077 (still bad) 2008-Dec-13 20:16:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.075 (still bad) 2008-Dec-13 20:16:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2008-Dec-13 20:16:48 LOG4 check_wapp_levels: WAPP-1 power levels: 0.994 1.013 0.986 0.909 2008-Dec-13 20:16:48 LOG4 check_wapp_levels: WAPP-2 power levels: 1.077 1.010 0.908 0.935 2008-Dec-13 20:16:48 LOG4 check_wapp_levels: WAPP-3 power levels: 0.921 0.966 0.890 1.030 2008-Dec-13 20:16:48 LOG4 check_wapp_levels: WAPP-4 power levels: 1.027 0.106 0.906 0.117 2008-Dec-13 20:16:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.077 (still bad) 2008-Dec-13 20:16:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.077 (still bad) 2008-Dec-13 20:16:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.080 (still bad) 2008-Dec-13 20:16:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.078 (still bad) 2008-Dec-13 20:16:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.079 (still bad) 2008-Dec-13 20:17:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.085 (still bad) 2008-Dec-13 20:17:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.082 (still bad) 2008-Dec-13 20:17:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.083 (still bad) 2008-Dec-13 20:17:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.085 (still bad) 2008-Dec-13 20:17:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.084 (still bad) 2008-Dec-13 20:17:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.085 (still bad) 2008-Dec-13 20:17:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.090 (still bad) 2008-Dec-13 20:17:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.085 (still bad) 2008-Dec-13 20:17:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.083 (still bad) 2008-Dec-13 20:17:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.086 (still bad) 2008-Dec-13 20:17:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.084 (still bad) 2008-Dec-13 20:17:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.087 (still bad) 2008-Dec-13 20:17:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.093 (still bad) 2008-Dec-13 20:17:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.091 (still bad) 2008-Dec-13 20:17:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.092 (still bad) 2008-Dec-13 20:17:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.094 (still bad) 2008-Dec-13 20:17:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.095 (still bad) 2008-Dec-13 20:17:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.094 (still bad) 2008-Dec-13 20:17:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.099 (still bad) 2008-Dec-13 20:17:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.095 (still bad) 2008-Dec-13 20:17:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.092 (still bad) 2008-Dec-13 20:17:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.094 (still bad) 2008-Dec-13 20:17:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.092 (still bad) 2008-Dec-13 20:17:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.092 (still bad) 2008-Dec-13 20:17:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2008-Dec-13 20:17:49 LOG4 check_wapp_levels: WAPP-1 power levels: 1.010 1.031 1.001 0.922 2008-Dec-13 20:17:49 LOG4 check_wapp_levels: WAPP-2 power levels: 1.097 1.029 0.923 0.948 2008-Dec-13 20:17:49 LOG4 check_wapp_levels: WAPP-3 power levels: 0.934 0.977 0.904 1.046 2008-Dec-13 20:17:49 LOG4 check_wapp_levels: WAPP-4 power levels: 1.047 0.106 0.921 0.118 2008-Dec-13 20:17:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.095 (still bad) 2008-Dec-13 20:17:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.089 (still bad) 2008-Dec-13 20:17:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.091 (still bad) 2008-Dec-13 20:17:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.087 (still bad) 2008-Dec-13 20:17:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.087 (still bad) 2008-Dec-13 20:18:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.089 (still bad) 2008-Dec-13 20:18:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.085 (still bad) 2008-Dec-13 20:18:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.080 (still bad) 2008-Dec-13 20:18:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.080 (still bad) 2008-Dec-13 20:18:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.078 (still bad) 2008-Dec-13 20:18:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.080 (still bad) 2008-Dec-13 20:18:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.081 (still bad) 2008-Dec-13 20:18:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.077 (still bad) 2008-Dec-13 20:18:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.075 (still bad) 2008-Dec-13 20:18:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.076 (still bad) 2008-Dec-13 20:18:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.072 (still bad) 2008-Dec-13 20:18:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.073 (still bad) 2008-Dec-13 20:18:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.077 (still bad) 2008-Dec-13 20:18:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.073 (still bad) 2008-Dec-13 20:18:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.072 (still bad) 2008-Dec-13 20:18:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.073 (still bad) 2008-Dec-13 20:18:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.071 (still bad) 2008-Dec-13 20:18:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.073 (still bad) 2008-Dec-13 20:18:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.077 (still bad) 2008-Dec-13 20:18:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.070 (still bad) 2008-Dec-13 20:18:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.069 (still bad) 2008-Dec-13 20:18:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.071 (still bad) 2008-Dec-13 20:18:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.069 (still bad) 2008-Dec-13 20:18:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.069 (still bad) 2008-Dec-13 20:18:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2008-Dec-13 20:18:50 LOG4 check_wapp_levels: WAPP-1 power levels: 0.997 1.019 0.991 0.916 2008-Dec-13 20:18:50 LOG4 check_wapp_levels: WAPP-2 power levels: 1.073 1.007 0.913 0.942 2008-Dec-13 20:18:50 LOG4 check_wapp_levels: WAPP-3 power levels: 0.930 0.978 0.908 1.050 2008-Dec-13 20:18:50 LOG4 check_wapp_levels: WAPP-4 power levels: 1.049 0.106 0.924 0.117 2008-Dec-13 20:18:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.068 (still bad) 2008-Dec-13 20:18:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.066 (still bad) 2008-Dec-13 20:18:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.068 (still bad) 2008-Dec-13 20:18:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.066 (still bad) 2008-Dec-13 20:19:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.067 (still bad) 2008-Dec-13 20:19:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.072 (still bad) 2008-Dec-13 20:19:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.066 (still bad) 2008-Dec-13 20:19:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.067 (still bad) 2008-Dec-13 20:19:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.067 (still bad) 2008-Dec-13 20:19:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.064 (still bad) 2008-Dec-13 20:19:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.066 (still bad) 2008-Dec-13 20:19:14 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.073 (still bad) 2008-Dec-13 20:19:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.068 (still bad) 2008-Dec-13 20:19:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.065 (still bad) 2008-Dec-13 20:19:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.066 (still bad) 2008-Dec-13 20:19:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.063 (still bad) 2008-Dec-13 20:19:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.062 (still bad) 2008-Dec-13 20:19:26 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.069 (still bad) 2008-Dec-13 20:19:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.065 (still bad) 2008-Dec-13 20:19:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.064 (still bad) 2008-Dec-13 20:19:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.067 (still bad) 2008-Dec-13 20:19:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.064 (still bad) 2008-Dec-13 20:19:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.067 (still bad) 2008-Dec-13 20:19:38 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.073 (still bad) 2008-Dec-13 20:19:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.066 (still bad) 2008-Dec-13 20:19:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.064 (still bad) 2008-Dec-13 20:19:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.068 (still bad) 2008-Dec-13 20:19:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.064 (still bad) 2008-Dec-13 20:19:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.065 (still bad) 2008-Dec-13 20:19:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2008-Dec-13 20:19:51 LOG4 check_wapp_levels: WAPP-1 power levels: 0.988 1.011 0.987 0.909 2008-Dec-13 20:19:51 LOG4 check_wapp_levels: WAPP-2 power levels: 1.070 1.008 0.911 0.936 2008-Dec-13 20:19:51 LOG4 check_wapp_levels: WAPP-3 power levels: 0.921 0.971 0.903 1.044 2008-Dec-13 20:19:51 LOG4 check_wapp_levels: WAPP-4 power levels: 1.035 0.106 0.912 0.118 2008-Dec-13 20:19:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.064 (still bad) 2008-Dec-13 20:19:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.064 (still bad) 2008-Dec-13 20:19:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.064 (still bad) 2008-Dec-13 20:19:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.064 (still bad) 2008-Dec-13 20:20:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.062 (still bad) 2008-Dec-13 20:20:03 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.071 (still bad) 2008-Dec-13 20:20:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.064 (still bad) 2008-Dec-13 20:20:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.063 (still bad) 2008-Dec-13 20:20:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.066 (still bad) 2008-Dec-13 20:20:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.064 (still bad) 2008-Dec-13 20:20:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.064 (still bad) 2008-Dec-13 20:20:15 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.066 (still bad) 2008-Dec-13 20:20:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.064 (still bad) 2008-Dec-13 20:20:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.064 (still bad) 2008-Dec-13 20:20:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.063 (still bad) 2008-Dec-13 20:20:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.063 (still bad) 2008-Dec-13 20:20:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.064 (still bad) 2008-Dec-13 20:20:27 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.066 (still bad) 2008-Dec-13 20:20:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.063 (still bad) 2008-Dec-13 20:20:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.063 (still bad) 2008-Dec-13 20:20:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.062 (still bad) 2008-Dec-13 20:20:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.064 (still bad) 2008-Dec-13 20:20:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.064 (still bad) 2008-Dec-13 20:20:39 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.066 (still bad) 2008-Dec-13 20:20:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.064 (still bad) 2008-Dec-13 20:20:43 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.064 (still bad) 2008-Dec-13 20:20:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.066 (still bad) 2008-Dec-13 20:20:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.062 (still bad) 2008-Dec-13 20:20:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.065 (still bad) 2008-Dec-13 20:20:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.067 (still bad) 2008-Dec-13 20:20:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2008-Dec-13 20:20:53 LOG4 check_wapp_levels: WAPP-1 power levels: 0.980 1.003 0.981 0.902 2008-Dec-13 20:20:53 LOG4 check_wapp_levels: WAPP-2 power levels: 1.065 0.997 0.905 0.931 2008-Dec-13 20:20:53 LOG4 check_wapp_levels: WAPP-3 power levels: 0.916 0.961 0.894 1.031 2008-Dec-13 20:20:53 LOG4 check_wapp_levels: WAPP-4 power levels: 1.026 0.106 0.904 0.118 2008-Dec-13 20:20:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.064 (still bad) 2008-Dec-13 20:20:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.066 (still bad) 2008-Dec-13 20:20:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.065 (still bad) 2008-Dec-13 20:21:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.066 (still bad) 2008-Dec-13 20:21:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.066 (still bad) 2008-Dec-13 20:21:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.064 (still bad) 2008-Dec-13 20:21:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.063 (still bad) 2008-Dec-13 20:21:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.063 (still bad) 2008-Dec-13 20:21:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.065 (still bad) 2008-Dec-13 20:21:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.066 (still bad) 2008-Dec-13 20:21:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.068 (still bad) 2008-Dec-13 20:21:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.067 (still bad) 2008-Dec-13 20:21:20 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.068 (still bad) 2008-Dec-13 20:21:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.070 (still bad) 2008-Dec-13 20:21:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.069 (still bad) 2008-Dec-13 20:21:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.069 (still bad) 2008-Dec-13 20:21:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.068 (still bad) 2008-Dec-13 20:21:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.070 (still bad) 2008-Dec-13 20:21:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.066 (still bad) 2008-Dec-13 20:21:34 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.066 (still bad) 2008-Dec-13 20:21:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.064 (still bad) 2008-Dec-13 20:21:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.064 (still bad) 2008-Dec-13 20:21:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.064 (still bad) 2008-Dec-13 20:21:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.062 (still bad) 2008-Dec-13 20:21:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.061 (still bad) 2008-Dec-13 20:21:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.064 (still bad) 2008-Dec-13 20:21:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.062 (still bad) 2008-Dec-13 20:21:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.065 (still bad) 2008-Dec-13 20:21:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.063 (still bad) 2008-Dec-13 20:21:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2008-Dec-13 20:21:54 LOG4 check_wapp_levels: WAPP-1 power levels: 0.982 1.005 0.978 0.904 2008-Dec-13 20:21:54 LOG4 check_wapp_levels: WAPP-2 power levels: 1.061 1.001 0.900 0.931 2008-Dec-13 20:21:54 LOG4 check_wapp_levels: WAPP-3 power levels: 0.913 0.964 0.892 1.033 2008-Dec-13 20:21:54 LOG4 check_wapp_levels: WAPP-4 power levels: 1.025 0.106 0.904 0.118 2008-Dec-13 20:21:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.065 (still bad) 2008-Dec-13 20:21:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.063 (still bad) 2008-Dec-13 20:22:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.062 (still bad) 2008-Dec-13 20:22:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.067 (still bad) 2008-Dec-13 20:22:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.062 (still bad) 2008-Dec-13 20:22:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.063 (still bad) 2008-Dec-13 20:22:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.064 (still bad) 2008-Dec-13 20:22:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.062 (still bad) 2008-Dec-13 20:22:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.062 (still bad) 2008-Dec-13 20:22:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.069 (still bad) 2008-Dec-13 20:22:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.063 (still bad) 2008-Dec-13 20:22:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.064 (still bad) 2008-Dec-13 20:22:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.066 (still bad) 2008-Dec-13 20:22:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.063 (still bad) 2008-Dec-13 20:22:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.064 (still bad) 2008-Dec-13 20:22:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.070 (still bad) 2008-Dec-13 20:22:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.065 (still bad) 2008-Dec-13 20:22:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.063 (still bad) 2008-Dec-13 20:22:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.066 (still bad) 2008-Dec-13 20:22:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.061 (still bad) 2008-Dec-13 20:22:36 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.063 (still bad) 2008-Dec-13 20:22:38 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.069 (still bad) 2008-Dec-13 20:22:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.064 (still bad) 2008-Dec-13 20:22:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.063 (still bad) 2008-Dec-13 20:22:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.064 (still bad) 2008-Dec-13 20:22:47 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.062 (still bad) 2008-Dec-13 20:22:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.065 (still bad) 2008-Dec-13 20:22:51 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.066 (still bad) 2008-Dec-13 20:22:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.065 (still bad) 2008-Dec-13 20:22:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2008-Dec-13 20:22:55 LOG4 check_wapp_levels: WAPP-1 power levels: 0.984 1.004 0.980 0.901 2008-Dec-13 20:22:55 LOG4 check_wapp_levels: WAPP-2 power levels: 1.066 1.001 0.899 0.929 2008-Dec-13 20:22:55 LOG4 check_wapp_levels: WAPP-3 power levels: 0.916 0.964 0.890 1.033 2008-Dec-13 20:22:55 LOG4 check_wapp_levels: WAPP-4 power levels: 1.027 0.106 0.904 0.118 2008-Dec-13 20:22:57 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.067 (still bad) 2008-Dec-13 20:22:59 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.063 (still bad) 2008-Dec-13 20:23:01 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.065 (still bad) 2008-Dec-13 20:23:03 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.065 (still bad) 2008-Dec-13 20:23:05 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.066 (still bad) 2008-Dec-13 20:23:07 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.064 (still bad) 2008-Dec-13 20:23:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.064 (still bad) 2008-Dec-13 20:23:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.064 (still bad) 2008-Dec-13 20:23:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.065 (still bad) 2008-Dec-13 20:23:15 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.068 (still bad) 2008-Dec-13 20:23:17 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.065 (still bad) 2008-Dec-13 20:23:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.064 (still bad) 2008-Dec-13 20:23:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.066 (still bad) 2008-Dec-13 20:23:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.062 (still bad) 2008-Dec-13 20:23:25 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.065 (still bad) 2008-Dec-13 20:23:27 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.066 (still bad) 2008-Dec-13 20:23:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.066 (still bad) 2008-Dec-13 20:23:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.063 (still bad) 2008-Dec-13 20:23:33 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.067 (still bad) 2008-Dec-13 20:23:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.064 (still bad) 2008-Dec-13 20:23:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.065 (still bad) 2008-Dec-13 20:23:39 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.069 (still bad) 2008-Dec-13 20:23:41 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.065 (still bad) 2008-Dec-13 20:23:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.063 (still bad) 2008-Dec-13 20:23:45 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.066 (still bad) 2008-Dec-13 20:23:47 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.064 (still bad) 2008-Dec-13 20:23:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.065 (still bad) 2008-Dec-13 20:23:51 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.071 (still bad) 2008-Dec-13 20:23:53 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.064 (still bad) 2008-Dec-13 20:23:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.064 (still bad) 2008-Dec-13 20:23:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2008-Dec-13 20:23:57 LOG4 check_wapp_levels: WAPP-1 power levels: 0.987 1.006 0.984 0.903 2008-Dec-13 20:23:57 LOG4 check_wapp_levels: WAPP-2 power levels: 1.065 1.003 0.908 0.943 2008-Dec-13 20:23:57 LOG4 check_wapp_levels: WAPP-3 power levels: 0.920 0.971 0.893 1.035 2008-Dec-13 20:23:57 LOG4 check_wapp_levels: WAPP-4 power levels: 1.028 0.107 0.905 0.118 2008-Dec-13 20:23:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.064 (still bad) 2008-Dec-13 20:24:01 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.065 (still bad) 2008-Dec-13 20:24:03 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.073 (still bad) 2008-Dec-13 20:24:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.066 (still bad) 2008-Dec-13 20:24:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.065 (still bad) 2008-Dec-13 20:24:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.066 (still bad) 2008-Dec-13 20:24:12 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.066 (still bad) 2008-Dec-13 20:24:14 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.065 (still bad) 2008-Dec-13 20:24:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.070 (still bad) 2008-Dec-13 20:24:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.063 (still bad) 2008-Dec-13 20:24:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.065 (still bad) 2008-Dec-13 20:24:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.067 (still bad) 2008-Dec-13 20:24:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.062 (still bad) 2008-Dec-13 20:24:26 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.066 (still bad) 2008-Dec-13 20:24:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.074 (still bad) 2008-Dec-13 20:24:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.065 (still bad) 2008-Dec-13 20:24:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.066 (still bad) 2008-Dec-13 20:24:34 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.067 (still bad) 2008-Dec-13 20:24:36 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.064 (still bad) 2008-Dec-13 20:24:38 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.066 (still bad) 2008-Dec-13 20:24:40 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.073 (still bad) 2008-Dec-13 20:24:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.069 (still bad) 2008-Dec-13 20:24:44 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.069 (still bad) 2008-Dec-13 20:24:46 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.072 (still bad) 2008-Dec-13 20:24:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.070 (still bad) 2008-Dec-13 20:24:50 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.071 (still bad) 2008-Dec-13 20:24:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.076 (still bad) 2008-Dec-13 20:24:54 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.068 (still bad) 2008-Dec-13 20:24:56 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.066 (still bad) 2008-Dec-13 20:24:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2008-Dec-13 20:24:58 LOG4 check_wapp_levels: WAPP-1 power levels: 0.987 1.008 0.982 0.903 2008-Dec-13 20:24:58 LOG4 check_wapp_levels: WAPP-2 power levels: 1.068 1.006 0.902 0.937 2008-Dec-13 20:24:58 LOG4 check_wapp_levels: WAPP-3 power levels: 0.916 0.963 0.898 1.042 2008-Dec-13 20:24:58 LOG4 check_wapp_levels: WAPP-4 power levels: 1.028 0.107 0.906 0.118 2008-Dec-13 20:25:00 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.065 (still bad) 2008-Dec-13 20:25:02 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.070 (still bad) 2008-Dec-13 20:25:04 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.081 (still bad) 2008-Dec-13 20:25:06 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.080 (still bad) 2008-Dec-13 20:25:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.080 (still bad) 2008-Dec-13 20:25:10 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.088 (still bad) 2008-Dec-13 20:25:12 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.089 (still bad) 2008-Dec-13 20:25:14 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.090 (still bad) 2008-Dec-13 20:25:16 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.085 (still bad) 2008-Dec-13 20:25:18 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.079 (still bad) 2008-Dec-13 20:25:20 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.075 (still bad) 2008-Dec-13 20:25:22 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.068 (still bad) 2008-Dec-13 20:25:24 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.067 (still bad) 2008-Dec-13 20:25:26 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.066 (still bad) 2008-Dec-13 20:25:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.066 (still bad) 2008-Dec-13 20:25:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.065 (still bad) 2008-Dec-13 20:25:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.063 (still bad) 2008-Dec-13 20:25:35 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.062 (still bad) 2008-Dec-13 20:25:37 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.063 (still bad) 2008-Dec-13 20:25:39 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.068 (still bad) 2008-Dec-13 20:25:41 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.064 (still bad) 2008-Dec-13 20:25:43 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.061 (still bad) 2008-Dec-13 20:25:45 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.066 (still bad) 2008-Dec-13 20:25:47 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.064 (still bad) 2008-Dec-13 20:25:49 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.065 (still bad) 2008-Dec-13 20:25:51 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.073 (still bad) 2008-Dec-13 20:25:53 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.066 (still bad) 2008-Dec-13 20:25:55 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.063 (still bad) 2008-Dec-13 20:25:57 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.064 (still bad) 2008-Dec-13 20:25:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2008-Dec-13 20:25:59 LOG4 check_wapp_levels: WAPP-1 power levels: 0.986 1.009 0.982 0.905 2008-Dec-13 20:25:59 LOG4 check_wapp_levels: WAPP-2 power levels: 1.064 0.999 0.903 0.935 2008-Dec-13 20:25:59 LOG4 check_wapp_levels: WAPP-3 power levels: 0.915 0.964 0.909 1.054 2008-Dec-13 20:25:59 LOG4 check_wapp_levels: WAPP-4 power levels: 1.029 0.107 0.905 0.118 2008-Dec-13 20:26:01 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.065 (still bad) 2008-Dec-13 20:26:03 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.070 (still bad) 2008-Dec-13 20:26:05 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.064 (still bad) 2008-Dec-13 20:26:07 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.063 (still bad) 2008-Dec-13 20:26:09 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.066 (still bad) 2008-Dec-13 20:26:11 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.063 (still bad) 2008-Dec-13 20:26:13 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.063 (still bad) 2008-Dec-13 20:26:15 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.069 (still bad) 2008-Dec-13 20:26:17 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.064 (still bad) 2008-Dec-13 20:26:19 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.062 (still bad) 2008-Dec-13 20:26:21 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.065 (still bad) 2008-Dec-13 20:26:23 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.065 (still bad) 2008-Dec-13 20:26:25 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.063 (still bad) 2008-Dec-13 20:26:27 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.069 (still bad) 2008-Dec-13 20:26:29 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.063 (still bad) 2008-Dec-13 20:26:31 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.063 (still bad) 2008-Dec-13 20:26:33 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.064 (still bad) 2008-Dec-13 20:26:35 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.062 (still bad) 2008-Dec-13 20:26:37 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.063 (still bad) 2008-Dec-13 20:26:39 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.070 (still bad) 2008-Dec-13 20:26:41 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.066 (still bad) 2008-Dec-13 20:26:43 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.062 (still bad) 2008-Dec-13 20:26:45 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.067 (still bad) 2008-Dec-13 20:26:47 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.064 (still bad) 2008-Dec-13 20:26:49 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.063 (still bad) 2008-Dec-13 20:26:51 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.069 (still bad) 2008-Dec-13 20:26:54 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.066 (still bad) 2008-Dec-13 20:26:56 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.064 (still bad) 2008-Dec-13 20:26:58 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.064 (still bad) 2008-Dec-13 20:27:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2008-Dec-13 20:27:00 LOG4 check_wapp_levels: WAPP-1 power levels: 0.981 1.009 0.980 0.904 2008-Dec-13 20:27:00 LOG4 check_wapp_levels: WAPP-2 power levels: 1.062 1.001 0.900 0.933 2008-Dec-13 20:27:00 LOG4 check_wapp_levels: WAPP-3 power levels: 0.917 0.963 0.893 1.036 2008-Dec-13 20:27:00 LOG4 check_wapp_levels: WAPP-4 power levels: 1.026 0.107 0.905 0.118 2008-Dec-13 20:27:02 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.064 (still bad) 2008-Dec-13 20:27:04 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.066 (still bad) 2008-Dec-13 20:27:06 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.064 (still bad) 2008-Dec-13 20:27:08 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.065 (still bad) 2008-Dec-13 20:27:10 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.065 (still bad) 2008-Dec-13 20:27:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.063 (still bad) 2008-Dec-13 20:27:14 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.063 (still bad) 2008-Dec-13 20:27:16 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.066 (still bad) 2008-Dec-13 20:27:18 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.062 (still bad) 2008-Dec-13 20:27:20 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.062 (still bad) 2008-Dec-13 20:27:22 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.061 (still bad) 2008-Dec-13 20:27:24 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.062 (still bad) 2008-Dec-13 20:27:26 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.066 (still bad) 2008-Dec-13 20:27:28 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.064 (still bad) 2008-Dec-13 20:27:30 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.063 (still bad) 2008-Dec-13 20:27:32 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.063 (still bad) 2008-Dec-13 20:27:34 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.065 (still bad) 2008-Dec-13 20:27:36 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.064 (still bad) 2008-Dec-13 20:27:38 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.067 (still bad) 2008-Dec-13 20:27:40 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.069 (still bad) 2008-Dec-13 20:27:42 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.066 (still bad) 2008-Dec-13 20:27:44 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.066 (still bad) 2008-Dec-13 20:27:46 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.069 (still bad) 2008-Dec-13 20:27:48 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.067 (still bad) 2008-Dec-13 20:27:50 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.069 (still bad) 2008-Dec-13 20:27:52 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.072 (still bad) 2008-Dec-13 20:27:54 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.071 (still bad) 2008-Dec-13 20:27:56 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.074 (still bad) 2008-Dec-13 20:27:58 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.074 (still bad) 2008-Dec-13 20:28:00 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.073 (still bad) 2008-Dec-13 20:28:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2008-Dec-13 20:28:02 LOG4 check_wapp_levels: WAPP-1 power levels: 0.982 1.007 0.986 0.906 2008-Dec-13 20:28:02 LOG4 check_wapp_levels: WAPP-2 power levels: 1.072 1.010 0.901 0.934 2008-Dec-13 20:28:02 LOG4 check_wapp_levels: WAPP-3 power levels: 0.918 0.965 0.893 1.035 2008-Dec-13 20:28:02 LOG4 check_wapp_levels: WAPP-4 power levels: 1.026 0.107 0.906 0.118 2008-Dec-13 20:28:04 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.074 (still bad) 2008-Dec-13 20:28:06 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.067 (still bad) 2008-Dec-13 20:28:08 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.068 (still bad) 2008-Dec-13 20:28:10 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.071 (still bad) 2008-Dec-13 20:28:12 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.076 (still bad) 2008-Dec-13 20:28:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.080 (still bad) 2008-Dec-13 20:28:17 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.090 (still bad) 2008-Dec-13 20:28:19 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.092 (still bad) 2008-Dec-13 20:28:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.090 (still bad) 2008-Dec-13 20:28:23 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.090 (still bad) 2008-Dec-13 20:28:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Dec-13 20:28:24 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Dec-13 20:28:24 LOG5 end_task: Level: (4) ID = <10288> Status = 0 0 0 0 ok 2008-Dec-13 20:28:24 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Dec-13 20:28:24 LOG5 end_task: Level: (3) ID = <10287> Status = 0 0 0 0 ok 2008-Dec-13 20:28:24 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Dec-13 20:28:24 LOG5 finish_task: Level: (2) ID = <10254> Status = 0 0 0 0 ok 2008-Dec-13 20:28:24 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Dec-13 20:28:24 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Dec-13 20:28:24 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Dec-13 20:28:24 LOG5 end_task: Level: (2) ID = <10254> Status = 0 0 0 0 ok 2008-Dec-13 20:28:24 COMMAND run_command_line: EXECUTING command 40: 'ENDIF' 2008-Dec-13 20:28:24 NOTE run_command_file: DONE with command file processing 2008-Dec-13 20:28:24 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2008-Dec-13 20:28:24 STOP finish_task: Finishing task 'running command file '081213_obs.cmd'' 2008-Dec-13 20:28:24 LOG5 finish_task: Level: (1) ID = <10210> Status = 0 0 0 0 ok 2008-Dec-13 20:28:24 DONE finish_task: DONE finished running: command file '081213_obs.cmd' 2008-Dec-13 20:28:24 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Dec-13 20:28:24 END end_task: Finishing task 'running command file '081213_obs.cmd'' with status 'OK' 2008-Dec-13 20:28:24 LOG5 end_task: Level: (1) ID = <10210> Status = 0 0 0 0 ok 2008-Dec-13 20:28:25 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.087 (still bad) 2008-Dec-13 20:28:50 ALERT CIMA-exit_cima: Exiting CIMA ... 2008-Dec-13 20:28:50 COMMAND CIMA-send_to_exec: Sending command to move interim correlator data 2008-Dec-13 20:28:50 LOG4 exec_msg: From OBSERVER: vw_send {mvdata a2048} 2008-Dec-13 20:28:50 LOG3 vw_send: To DATATAKING: mvdata a2048 2008-Dec-13 20:28:50 COMMAND CIMA-send_to_exec: Sending command to clear telescope offsets 2008-Dec-13 20:28:50 LOG4 exec_msg: From OBSERVER: vw_send {pnt c setoff 0 0} 2008-Dec-13 20:28:50 LOG3 vw_send: To DATATAKING: pnt c setoff 0 0 2008-Dec-13 20:28:50 LOG4 got_cormsg: From DATATAKING: mvdata a2048 2008-Dec-13 20:28:50 NOTE CIMA-exit_cima: Cleaning up session ... 2008-Dec-13 20:28:51 LOG4 got_cormsg: From DATATAKING: pnt c setoff 0 0 2008-Dec-13 20:28:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 20:28:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Dec-13 20:28:53 LOG3 exec_msg: Closing socket