2008-Aug-11 23:55:07 BEGIN executive: CIMA executive starting ... 2008-Aug-11 23:55:07 NOTE executive: STARTING NEW CIMA SESSION 2008-Aug-11 23:55:07 INFO1 executive: Using CIMA version 3.0.00 'next' from 2008-06-12 15:50 2008-Aug-11 23:55:07 INFO4 executive: This is an ON-LINE session 2008-Aug-11 23:55:07 INFO4 executive: This is a LOCAL session 2008-Aug-11 23:55:07 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2008-Aug-11 23:55:07 INFO1 executive: CIMA session for project 'a2048' in 'line' mode for 'RM' 2008-Aug-11 23:55:07 INFO2 executive: Logging to '/share/obs4/usr/a2048/a2048.cimalog_20080811' 2008-Aug-11 23:55:08 LOG2 log_preferences: Currently applied preferences: 2008-Aug-11 23:55:08 LOG2 log_preferences: prefs(dailylog) = daily 2008-Aug-11 23:55:08 LOG2 log_preferences: prefs(offlinelog) = skip 2008-Aug-11 23:55:08 LOG2 log_preferences: prefs(datawindow) = ignore 2008-Aug-11 23:55:08 LOG2 log_preferences: prefs(limitwarning) = enabled 2008-Aug-11 23:55:08 LOG2 log_preferences: prefs(wappfailure) = abort 2008-Aug-11 23:55:08 LOG2 log_preferences: prefs(helpstyle) = stay-open 2008-Aug-11 23:55:08 LOG2 log_preferences: prefs(logcolours) = full 2008-Aug-11 23:55:08 LOG2 log_preferences: prefs(displaylevel) = INFO3 2008-Aug-11 23:55:08 LOG2 log_preferences: prefs(loglevel) = LOG5 2008-Aug-11 23:55:08 LOG2 log_preferences: prefs(displayformat) = short 2008-Aug-11 23:55:08 LOG2 log_preferences: prefs(logformat) = new 2008-Aug-11 23:55:08 LOG2 log_preferences: prefs(fontsize) = 4 2008-Aug-11 23:55:08 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2008-Aug-11 23:55:08 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2048 2008-Aug-11 23:55:08 ALERT executive: CIMA executive ready 2008-Aug-11 23:55:10 NOTE frontend: CIMA frontend ready 2008-Aug-11 23:55:12 LOG4 got_cormsg: From DATATAKING: Can't communicate with program corProg 2008-Aug-11 23:55:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-11 23:55:12 LOG4 got_cormsg: From DATATAKING: setup 2008-Aug-11 23:55:16 INFO1 CIMA-find_last_tsys: Last Tsys-values for 'L-Band Wide' is from 2008-Aug-11 13:33:26 for 'hcorcal': 31.7 K & 31.5 K 2008-Aug-11 23:55:16 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2008-Aug-11 23:55:16 LOG4 exec_msg: From OBSERVER: select_receiver lbw no no yes 2008-Aug-11 23:55:16 LOG1 select_receiver: Calling 'select_receiver lbw no no yes' 2008-Aug-11 23:55:16 BEGIN begin_task: Starting task 'selecting receiver L-Band Wide' 2008-Aug-11 23:55:16 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Aug-11 23:55:16 NOTE select_receiver: Starting to select receiver L-Band Wide 2008-Aug-11 23:55:16 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver L-Band Wide ...} 2008-Aug-11 23:55:16 LOG3 vw_send: To DATATAKING: setupall 5 1400.0 2008-Aug-11 23:55:16 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Aug-11 23:55:16 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Aug-11 23:55:16 STOP finish_task: Finishing task 'selecting receiver L-Band Wide' 2008-Aug-11 23:55:16 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Aug-11 23:55:16 DONE finish_task: DONE finished selecting: receiver L-Band Wide 2008-Aug-11 23:55:16 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Aug-11 23:55:16 END end_task: Finishing task 'selecting receiver L-Band Wide' with status 'OK' 2008-Aug-11 23:55:16 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Aug-11 23:55:20 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0x300002 2008-Aug-11 23:55:20 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0x300002' 2008-Aug-11 23:55:20 LOG4 got_cormsg: From DATATAKING: vw% io 2008-Aug-11 23:55:20 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2008-Aug-11 23:55:20 LOG4 got_cormsg: From DATATAKING: 2008-Aug-11 23:55:20 LOG4 got_cormsg: From DATATAKING: vw% tape stat 2008-Aug-11 23:55:20 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2008-Aug-11 23:55:20 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2008-Aug-11 23:55:20 LOG4 got_cormsg: From DATATAKING: vw% connectall 2008-Aug-11 23:55:20 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2008-Aug-11 23:55:20 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2008-Aug-11 23:55:20 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2008-Aug-11 23:55:20 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2008-Aug-11 23:55:20 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2008-Aug-11 23:55:20 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2008-Aug-11 23:55:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-11 23:55:20 LOG4 got_cormsg: From DATATAKING: online.. exit cmd to quit. 2008-Aug-11 23:55:20 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2008-Aug-11 23:55:20 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2048 2008-Aug-11 23:55:20 LOG4 got_cormsg: From DATATAKING: setupall 5 1400.0 2008-Aug-11 23:55:20 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Aug-11 23:55:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-11 23:55:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-11 23:55:22 NOTE CIMA-load_config_file: Loading and applying configuration file 'ages_lbw.conf' 2008-Aug-11 23:55:22 INFO1 CIMA-find_last_tsys: Last Tsys-values for 'L-Band Wide' is from 2008-Aug-11 13:33:26 for 'hcorcal': 31.7 K & 31.5 K 2008-Aug-11 23:55:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Aug-11 23:55:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Aug-11 23:55:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "lbw" 2008-Aug-11 23:55:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Aug-11 23:55:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Aug-11 23:55:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2008-Aug-11 23:55:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "10GHz to 1500" 2008-Aug-11 23:55:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786" 2008-Aug-11 23:55:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786" 2008-Aug-11 23:55:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786" 2008-Aug-11 23:55:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786" 2008-Aug-11 23:55:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786" 2008-Aug-11 23:55:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786" 2008-Aug-11 23:55:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786" 2008-Aug-11 23:55:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786" 2008-Aug-11 23:55:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786" 2008-Aug-11 23:55:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "275" 2008-Aug-11 23:55:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "275" 2008-Aug-11 23:55:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "275" 2008-Aug-11 23:55:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "275" 2008-Aug-11 23:55:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "1775.000000" 2008-Aug-11 23:55:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "1775.000000" 2008-Aug-11 23:55:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "1775.000000" 2008-Aug-11 23:55:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "1775.000000" 2008-Aug-11 23:55:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "1775.000000" 2008-Aug-11 23:55:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "1775.000000" 2008-Aug-11 23:55:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "1775.000000" 2008-Aug-11 23:55:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "1775.000000" 2008-Aug-11 23:55:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Aug-11 23:55:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2008-Aug-11 23:55:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Aug-11 23:55:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "lbwpol lin" 2008-Aug-11 23:55:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "lbfb 7" 2008-Aug-11 23:55:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Aug-11 23:55:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "F" 2008-Aug-11 23:55:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "5" 2008-Aug-11 23:55:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Aug-11 23:55:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "7 5" 2008-Aug-11 23:55:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "4" 2008-Aug-11 23:55:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "11420.405752" 2008-Aug-11 23:55:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Aug-11 23:55:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Aug-11 23:55:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "0" 2008-Aug-11 23:55:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "0" 2008-Aug-11 23:55:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "F" 2008-Aug-11 23:55:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "0" 2008-Aug-11 23:55:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Aug-11 23:55:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Aug-11 23:55:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Aug-11 23:55:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "1500" 2008-Aug-11 23:55:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "1500 1500 1500 1500 1500 1500 1500 1500" 2008-Aug-11 23:55:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "750" 2008-Aug-11 23:55:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Aug-11 23:55:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Aug-11 23:55:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "F" 2008-Aug-11 23:55:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Aug-11 23:55:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "5" 2008-Aug-11 23:55:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Aug-11 23:55:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Aug-11 23:55:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Aug-11 23:55:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "50" 2008-Aug-11 23:55:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "50" 2008-Aug-11 23:55:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "25" 2008-Aug-11 23:55:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "25" 2008-Aug-11 23:55:24 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2008-Aug-11 23:55:24 LOG4 exec_msg: From OBSERVER: config_iflo 2008-Aug-11 23:55:24 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Aug-11 23:55:24 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Aug-11 23:55:24 INFO1 config_iflo: Starting to configure IF/LO path for L-Band Wide 2008-Aug-11 23:55:24 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Aug-11 23:55:24 INFO1 config_iflo: Selecting receiver L-Band Wide 2008-Aug-11 23:55:24 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver L-Band Wide} 2008-Aug-11 23:55:24 LOG1 select_receiver: Calling 'select_receiver lbw no no yes' 2008-Aug-11 23:55:24 START begin_task: Starting task 'selecting receiver L-Band Wide' 2008-Aug-11 23:55:24 LOG5 begin_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2008-Aug-11 23:55:24 NOTE select_receiver: Starting to select receiver L-Band Wide 2008-Aug-11 23:55:24 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver L-Band Wide ...} 2008-Aug-11 23:55:24 LOG3 vw_send: To DATATAKING: setupall 5 1400.0 2008-Aug-11 23:55:24 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Aug-11 23:55:24 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Aug-11 23:55:24 STOP finish_task: Finishing task 'selecting receiver L-Band Wide' 2008-Aug-11 23:55:24 LOG5 finish_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2008-Aug-11 23:55:24 INFO2 finish_task: DONE finished selecting: receiver L-Band Wide 2008-Aug-11 23:55:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-11 23:55:25 STOP end_task: Finishing task 'selecting receiver L-Band Wide' with status 'OK' 2008-Aug-11 23:55:25 LOG5 end_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2008-Aug-11 23:55:25 START begin_task: Starting task 'waiting for receiver L-Band Wide' 2008-Aug-11 23:55:25 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Aug-11 23:55:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 131.4 BITMAP stat_alfa_rot INFO {Waiting on rotating floor} 2008-Aug-11 23:55:25 START begin_task: Starting task 'waiting on waiting for receiver rotation' 2008-Aug-11 23:55:25 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Aug-11 23:55:25 LOG4 got_cormsg: From DATATAKING: setupall 5 1400.0 2008-Aug-11 23:55:25 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Aug-11 23:55:34 LOG4 got_cormsg: From DATATAKING: waiting for turret position:285.79 2008-Aug-11 23:57:30 LOG4 got_cormsg: From DATATAKING: settinng up if2 2008-Aug-11 23:57:30 LOG4 got_cormsg: From DATATAKING: setting up if1lo 2008-Aug-11 23:57:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-11 23:57:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-11 23:57:32 STOP end_task: Finishing task 'waiting on waiting for receiver rotation' with status 'OK' 2008-Aug-11 23:57:32 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Aug-11 23:57:32 LOG4 send_obs_status: To obs_status: <0> TASKWAIT 2008-Aug-11 23:57:32 STOP end_task: Finishing task 'waiting for receiver L-Band Wide' with status 'OK' 2008-Aug-11 23:57:32 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Aug-11 23:57:32 INFO1 config_iflo: Configuring rest of the IF/LO path 2008-Aug-11 23:57:32 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2008-Aug-11 23:57:32 LOG3 vw_send: To DATATAKING: lbwpol lin 2008-Aug-11 23:57:32 LOG3 vw_send: To DATATAKING: lbfb 7 2008-Aug-11 23:57:32 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2008-Aug-11 23:57:32 LOG3 vw_send: To DATATAKING: if1 {if1_shcl F} 2008-Aug-11 23:57:32 LOG3 vw_send: To DATATAKING: if1 {if1_rfnum 5} 2008-Aug-11 23:57:32 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2008-Aug-11 23:57:32 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 7 5} 2008-Aug-11 23:57:32 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 4} 2008-Aug-11 23:57:32 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 11420405752.0} 2008-Aug-11 23:57:32 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2008-Aug-11 23:57:33 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2008-Aug-11 23:57:33 LOG3 vw_send: To DATATAKING: if1 {if1_ac2sw 0} 2008-Aug-11 23:57:33 LOG3 vw_send: To DATATAKING: if1 {if1_phbsig 0} 2008-Aug-11 23:57:33 LOG3 vw_send: To DATATAKING: if1 {if1_hybrid F} 2008-Aug-11 23:57:33 LOG3 vw_send: To DATATAKING: if1 {if1_phblo 0} 2008-Aug-11 23:57:33 LOG3 vw_send: To DATATAKING: if1 {if1_750nb F} 2008-Aug-11 23:57:33 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2008-Aug-11 23:57:33 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 5} 2008-Aug-11 23:57:33 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2008-Aug-11 23:57:33 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2008-Aug-11 23:57:33 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Aug-11 23:57:33 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq 1500} 2008-Aug-11 23:57:33 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 1500 1500 1500 1500 1500 1500 1500 1500} 2008-Aug-11 23:57:33 LOG3 vw_send: To DATATAKING: if2 {if2_vlbainp 750} 2008-Aug-11 23:57:33 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0} 2008-Aug-11 23:57:33 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Aug-11 23:57:33 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2008-Aug-11 23:57:33 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Aug-11 23:57:33 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2008-Aug-11 23:57:33 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2008-Aug-11 23:57:33 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Aug-11 23:57:33 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-11 23:57:33 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Aug-11 23:57:33 LOG5 begin_task: Level: (2) ID = <10006> Status = 0 0 0 0 ok 2008-Aug-11 23:57:33 LOG4 got_cormsg: From DATATAKING: lbwpol lin 2008-Aug-11 23:57:33 LOG4 got_cormsg: From DATATAKING: lbfb 7 2008-Aug-11 23:57:33 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2008-Aug-11 23:57:33 LOG4 got_cormsg: From DATATAKING: if1 {if1_shcl F} 2008-Aug-11 23:57:33 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfnum 5} 2008-Aug-11 23:57:33 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2008-Aug-11 23:57:33 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 7 5} 2008-Aug-11 23:57:33 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 4} 2008-Aug-11 23:57:33 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 11420405752.0} 2008-Aug-11 23:57:33 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2008-Aug-11 23:57:33 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2008-Aug-11 23:57:33 LOG4 got_cormsg: From DATATAKING: if1 {if1_ac2sw 0} 2008-Aug-11 23:57:33 LOG4 got_cormsg: From DATATAKING: if1 {if1_phbsig 0} 2008-Aug-11 23:57:33 LOG4 got_cormsg: From DATATAKING: if1 {if1_hybrid F} 2008-Aug-11 23:57:33 LOG4 got_cormsg: From DATATAKING: if1 {if1_phblo 0} 2008-Aug-11 23:57:33 LOG4 got_cormsg: From DATATAKING: if1 {if1_750nb F} 2008-Aug-11 23:57:33 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2008-Aug-11 23:57:33 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 5} 2008-Aug-11 23:57:33 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2008-Aug-11 23:57:33 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2008-Aug-11 23:57:33 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Aug-11 23:57:33 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq 1500} 2008-Aug-11 23:57:33 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 1500 1500 1500 1500 1500 1500 1500 1500} 2008-Aug-11 23:57:33 LOG4 got_cormsg: From DATATAKING: if2 {if2_vlbainp 750} 2008-Aug-11 23:57:33 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0} 2008-Aug-11 23:57:33 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Aug-11 23:57:33 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2008-Aug-11 23:57:33 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2008-Aug-11 23:57:33 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2008-Aug-11 23:57:33 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-11 23:57:44 LOG4 got_cormsg: From DATATAKING: settinng up if2 2008-Aug-11 23:57:44 LOG4 got_cormsg: From DATATAKING: setting up if1lo 2008-Aug-11 23:57:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-11 23:57:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-11 23:57:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-11 23:57:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-11 23:57:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-11 23:57:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-11 23:57:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-11 23:57:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-11 23:57:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-11 23:57:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-11 23:57:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-11 23:57:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-11 23:57:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-11 23:57:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-11 23:57:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-11 23:57:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-11 23:57:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-11 23:57:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-11 23:57:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-11 23:57:57 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-11 23:57:57 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-11 23:57:57 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-11 23:57:57 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-11 23:57:57 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-11 23:57:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-11 23:57:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-11 23:57:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-11 23:57:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-11 23:57:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-11 23:57:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-11 23:57:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-11 23:57:59 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-11 23:57:59 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Aug-11 23:57:59 LOG5 end_task: Level: (2) ID = <10006> Status = 0 0 0 0 ok 2008-Aug-11 23:57:59 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Aug-11 23:57:59 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Aug-11 23:57:59 LOG5 finish_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Aug-11 23:57:59 DONE finish_task: DONE finished configuration: IF/LO path 2008-Aug-11 23:57:59 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Aug-11 23:57:59 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Aug-11 23:57:59 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Aug-11 23:57:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-11 23:57:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Aug-11 23:57:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Aug-11 23:57:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Aug-11 23:57:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Aug-11 23:57:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "1 chan, 9-level, pol a" 2008-Aug-11 23:57:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "1 chan, 9-level, pol b" 2008-Aug-11 23:57:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "1 chan, 9-level, pol a" 2008-Aug-11 23:57:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "1 chan, 9-level, pol b" 2008-Aug-11 23:57:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "50" 2008-Aug-11 23:57:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "50" 2008-Aug-11 23:57:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "25" 2008-Aug-11 23:57:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "25" 2008-Aug-11 23:57:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Aug-11 23:57:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "0" 2008-Aug-11 23:57:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "0" 2008-Aug-11 23:57:59 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2008-Aug-11 23:57:59 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2008-Aug-11 23:57:59 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Aug-11 23:57:59 LOG5 begin_task: Level: (1) ID = <10007> Status = 0 0 0 0 ok 2008-Aug-11 23:57:59 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Aug-11 23:57:59 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Aug-11 23:57:59 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2008-Aug-11 23:57:59 START begin_task: Starting task 'selecting calibration port' 2008-Aug-11 23:57:59 LOG5 begin_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2008-Aug-11 23:57:59 LOG3 vw_send: To DATATAKING: calport 3 2008-Aug-11 23:57:59 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Aug-11 23:57:59 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-11 23:57:59 START begin_task: Starting task 'waiting on calport' 2008-Aug-11 23:57:59 LOG5 begin_task: Level: (3) ID = <10009> Status = 0 0 0 0 ok 2008-Aug-11 23:57:59 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Aug-11 23:57:59 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-11 23:58:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-11 23:58:00 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-11 23:58:00 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Aug-11 23:58:00 LOG5 end_task: Level: (3) ID = <10009> Status = 0 0 0 0 ok 2008-Aug-11 23:58:00 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Aug-11 23:58:00 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Aug-11 23:58:00 LOG5 end_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2008-Aug-11 23:58:00 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Aug-11 23:58:00 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Aug-11 23:58:00 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-11 23:58:00 LOG5 begin_task: Level: (2) ID = <10010> Status = 0 0 0 0 ok 2008-Aug-11 23:58:00 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-11 23:58:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-11 23:58:00 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-11 23:58:00 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-11 23:58:00 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-11 23:58:00 LOG5 end_task: Level: (2) ID = <10010> Status = 0 0 0 0 ok 2008-Aug-11 23:58:00 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Aug-11 23:58:00 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Aug-11 23:58:00 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Aug-11 23:58:00 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Aug-11 23:58:00 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Aug-11 23:58:00 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Aug-11 23:58:00 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Aug-11 23:58:00 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Aug-11 23:58:00 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 RM 2008-Aug-11 23:58:00 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 RM 2008-Aug-11 23:58:00 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 RM 2008-Aug-11 23:58:00 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 RM 2008-Aug-11 23:58:00 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Aug-11 23:58:00 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Aug-11 23:58:00 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-11 23:58:00 LOG5 begin_task: Level: (2) ID = <10011> Status = 0 0 0 0 ok 2008-Aug-11 23:58:00 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-11 23:58:00 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-11 23:58:00 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-11 23:58:00 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-11 23:58:00 LOG5 end_task: Level: (2) ID = <10011> Status = 0 0 0 0 ok 2008-Aug-11 23:58:00 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 RM 2008-Aug-11 23:58:00 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 RM 2008-Aug-11 23:58:00 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 RM 2008-Aug-11 23:58:00 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 RM 2008-Aug-11 23:58:00 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Aug-11 23:58:00 LOG5 finish_task: Level: (1) ID = <10007> Status = 0 0 0 0 ok 2008-Aug-11 23:58:00 DONE finish_task: DONE finished configuring: the WAPPs in single board mode 2008-Aug-11 23:58:00 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Aug-11 23:58:00 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Aug-11 23:58:00 LOG5 end_task: Level: (1) ID = <10007> Status = 0 0 0 0 ok 2008-Aug-11 23:58:00 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 RM' 2008-Aug-11 23:58:00 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Aug-11 23:58:00 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Aug-11 23:58:01 NOTE CIMA-load_config_file: Configuration file 'ages_lbw.conf' applied. 2008-Aug-11 23:58:01 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 RM' 2008-Aug-11 23:58:01 NOTE WAPPDATA-new_file: New FITS file: wapp.20080811.a2048.0013.fits 2008-Aug-11 23:58:01 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20080811.a2048.0013.fits} 2008-Aug-11 23:58:06 COMMAND CIMA-send_to_exec: Sending command to restart the GPIB socket communication program 2008-Aug-11 23:58:06 LOG4 exec_msg: From OBSERVER: restart_gpib 2008-Aug-11 23:58:06 LOG5 restart_gpib: Calling 'restart_gpib' 2008-Aug-11 23:58:06 BEGIN begin_task: Starting task 'restarting GPIB communication' 2008-Aug-11 23:58:06 LOG5 begin_task: Level: (1) ID = <10012> Status = 0 0 0 0 ok 2008-Aug-11 23:58:06 ALERT restart_gpib: Restarting the GPIB socket communication 2008-Aug-11 23:58:06 END end_task: Finishing task 'restarting GPIB communication' with status 'OK' 2008-Aug-11 23:58:06 LOG5 end_task: Level: (1) ID = <10012> Status = 0 0 0 0 ok 2008-Aug-11 23:58:06 LOG4 exec_msg: From SPAWNGPIB: log_message INFO {WAPPSERV-spawngpib} {GPIB software restarted} 2008-Aug-11 23:58:06 INFO WAPPSERV-spawngpib: GPIB software restarted 2008-Aug-11 23:59:04 COMMAND CIMA-send_to_exec: Sending command to point to a source 2008-Aug-11 23:59:04 LOG4 exec_msg: From OBSERVER: track_new_source J223823+245208 223823.9 245208 J 0 0 main small /share/obs4/usr/a2048/n7332fu.cat 15259 Topocentric velocity(optical) 0 0 0.0 0.0 0 2008-Aug-11 23:59:04 LOG1 track_new_source: Calling 'track_new_source J223823+245208 223823.9 245208 J 0 0 main small /share/obs4/usr/a2048/n7332fu.cat 15259 Topocentric velocity(optical) 0 0 0.0 0.0 0' 2008-Aug-11 23:59:04 BEGIN begin_task: Starting task 'selecting new source' 2008-Aug-11 23:59:04 LOG5 begin_task: Level: (1) ID = <10013> Status = 0 0 0 0 ok 2008-Aug-11 23:59:04 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {J223823+245208} INFO {Selecting source 'J223823+245208' ...} 2008-Aug-11 23:59:04 LOG3 track_source: Calling 'track_source J223823+245208 223823.9 245208 J 0 0 main small /share/obs4/usr/a2048/n7332fu.cat 15259 Topocentric velocity(optical)' 2008-Aug-11 23:59:04 START begin_task: Starting task 'sending tracking commands' 2008-Aug-11 23:59:04 LOG5 begin_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2008-Aug-11 23:59:04 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {J223823+245208} INFO {Slewing to source 'J223823+245208' ...} 2008-Aug-11 23:59:04 INFO1 track_source: Starting to track J223823+245208 2008-Aug-11 23:59:04 LOG3 vw_send: To DATATAKING: hdrldsrcnm "J223823+245208" 2008-Aug-11 23:59:04 LOG3 vw_send: To DATATAKING: set ra 223823.9 2008-Aug-11 23:59:04 LOG3 vw_send: To DATATAKING: set dec 245208 2008-Aug-11 23:59:04 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Aug-11 23:59:04 LOG3 vw_send: To DATATAKING: pnt tr 223823.9 245208 -CJ 2008-Aug-11 23:59:04 LOG3 vw_send: To DATATAKING: dopsetvel 15259 topo 2008-Aug-11 23:59:05 STOP finish_task: Finishing task 'sending tracking commands' 2008-Aug-11 23:59:05 LOG5 finish_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2008-Aug-11 23:59:05 INFO2 finish_task: DONE finished sending: tracking commands 2008-Aug-11 23:59:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-11 23:59:05 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Aug-11 23:59:05 LOG5 end_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2008-Aug-11 23:59:05 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0.0 0.0 0' 2008-Aug-11 23:59:05 START begin_task: Starting task 'applying pointing corrections' 2008-Aug-11 23:59:05 LOG5 begin_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2008-Aug-11 23:59:05 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2008-Aug-11 23:59:05 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2008-Aug-11 23:59:05 STOP finish_task: Finishing task 'applying pointing corrections' 2008-Aug-11 23:59:05 LOG5 finish_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2008-Aug-11 23:59:05 INFO2 finish_task: DONE finished applying: pointing corrections 2008-Aug-11 23:59:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-11 23:59:05 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2008-Aug-11 23:59:05 LOG5 end_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2008-Aug-11 23:59:05 STOP finish_task: Finishing task 'selecting new source' 2008-Aug-11 23:59:05 LOG5 finish_task: Level: (1) ID = <10013> Status = 0 0 0 0 ok 2008-Aug-11 23:59:05 DONE finish_task: DONE finished selecting: new source 2008-Aug-11 23:59:05 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Aug-11 23:59:05 END end_task: Finishing task 'selecting new source' with status 'OK' 2008-Aug-11 23:59:05 LOG5 end_task: Level: (1) ID = <10013> Status = 0 0 0 0 ok 2008-Aug-11 23:59:05 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "J223823+245208" 2008-Aug-11 23:59:05 LOG4 got_cormsg: From DATATAKING: set ra 223823.9 2008-Aug-11 23:59:05 LOG4 got_cormsg: From DATATAKING: vw% 223823.9 2008-Aug-11 23:59:05 LOG4 got_cormsg: From DATATAKING: 2008-Aug-11 23:59:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-11 23:59:05 LOG4 got_cormsg: From DATATAKING: set dec 245208 2008-Aug-11 23:59:05 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Aug-11 23:59:05 LOG4 got_cormsg: From DATATAKING: pnt tr 223823.9 245208 -CJ 2008-Aug-11 23:59:05 LOG4 got_cormsg: From DATATAKING: dopsetvel 15259 topo 2008-Aug-11 23:59:05 LOG4 got_cormsg: From DATATAKING: 245208 2008-Aug-11 23:59:05 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2008-Aug-11 23:59:05 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2008-Aug-11 23:59:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-11 23:59:16 COMMAND CIMA-send_to_exec: Sending command to restart the GPIB socket communication program 2008-Aug-11 23:59:16 LOG4 exec_msg: From OBSERVER: restart_gpib 2008-Aug-11 23:59:16 LOG5 restart_gpib: Calling 'restart_gpib' 2008-Aug-11 23:59:16 BEGIN begin_task: Starting task 'restarting GPIB communication' 2008-Aug-11 23:59:16 LOG5 begin_task: Level: (1) ID = <10016> Status = 0 0 0 0 ok 2008-Aug-11 23:59:17 ALERT restart_gpib: Restarting the GPIB socket communication 2008-Aug-11 23:59:17 END end_task: Finishing task 'restarting GPIB communication' with status 'OK' 2008-Aug-11 23:59:17 LOG5 end_task: Level: (1) ID = <10016> Status = 0 0 0 0 ok 2008-Aug-11 23:59:17 LOG4 exec_msg: From SPAWNGPIB: log_message INFO {WAPPSERV-spawngpib} {GPIB software restarted} 2008-Aug-11 23:59:17 INFO WAPPSERV-spawngpib: GPIB software restarted 2008-Aug-12 00:03:10 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.69) to the zenith angle limit 19.69 degrees! 2008-Aug-12 00:03:10 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 249.2546 19.6897 RA/Dec = 22:38:24 +24:52:08 2008-Aug-12 00:03:40 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.69) to the zenith angle limit 19.69 degrees! 2008-Aug-12 00:03:40 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 249.2000 19.6900 RA/Dec = 22:38:24 +24:52:08 2008-Aug-12 00:03:41 COMMAND CIMA-send_to_exec: Sending command to run spider scan 2008-Aug-12 00:03:41 LOG4 exec_msg: From OBSERVER: runcalib B2121+248 212130.6 245116 B 4.218 -0.967 -2.288 lbw 1 yes 2008-Aug-12 00:03:41 LOG1 runcalib: Calling 'runcalib B2121+248 212130.6 245116 B 4.218 -0.967 -2.288 lbw 1 yes' 2008-Aug-12 00:03:41 BEGIN begin_task: Starting task 'calibration spider scan' 2008-Aug-12 00:03:41 LOG5 begin_task: Level: (1) ID = <10017> Status = 0 0 0 0 ok 2008-Aug-12 00:03:41 INFO4 begin_task: MAKING 'calibration spider scan' using 'lbw' + 'WAPP' on 'J223823+245208' 2008-Aug-12 00:03:41 INFO1 runcalib: Starting pattern: Calibration spider scan on B2121+248, lbw, 1 loops 2008-Aug-12 00:03:41 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Calibration spider scan} TOTALLOOPS 1 INFO {Starting calibration spider scan ...} 2008-Aug-12 00:03:41 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2048 2008-Aug-12 00:03:41 LOG3 vw_send: To DATATAKING: logOpen a2048.log 2008-Aug-12 00:03:41 LOG3 track_source: Calling 'track_source B2121+248 212130.6 245116 B 0.0 0.0 main small calib.cat 0.0 Topocentric velocity(optical)' 2008-Aug-12 00:03:41 START begin_task: Starting task 'sending tracking commands' 2008-Aug-12 00:03:41 LOG5 begin_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2008-Aug-12 00:03:41 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {B2121+248} INFO {Slewing to source 'B2121+248' ...} 2008-Aug-12 00:03:41 INFO1 track_source: Starting to track B2121+248 2008-Aug-12 00:03:41 LOG3 vw_send: To DATATAKING: hdrldsrcnm "B2121+248" 2008-Aug-12 00:03:41 LOG3 vw_send: To DATATAKING: set ra 212130.6 2008-Aug-12 00:03:41 LOG3 vw_send: To DATATAKING: set dec 245116 2008-Aug-12 00:03:41 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Aug-12 00:03:41 LOG3 vw_send: To DATATAKING: pnt tr 212130.6 245116 -CB 2008-Aug-12 00:03:41 LOG3 vw_send: To DATATAKING: dopsetvel 0.0 topo 2008-Aug-12 00:03:41 STOP finish_task: Finishing task 'sending tracking commands' 2008-Aug-12 00:03:41 LOG5 finish_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2008-Aug-12 00:03:41 INFO2 finish_task: DONE finished sending: tracking commands 2008-Aug-12 00:03:41 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-12 00:03:41 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Aug-12 00:03:41 LOG5 end_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2008-Aug-12 00:03:41 INFO4 runcalib: Making calibration spider scan at Az = 218.0 ZA = 8.69 2008-Aug-12 00:03:41 LOG3 vw_send: To DATATAKING: calfile 2008-Aug-12 00:03:41 LOG4 send_obs_status: To obs_status: <1> ICORRFILENAME calfile 2008-Aug-12 00:03:41 INFO2 runcalib: Starting calibration spider scan loop 1 of 1 2008-Aug-12 00:03:41 LOG4 send_obs_status: To obs_status: <1> LOOP 1 TOTALPARTS 4 PART 1 2008-Aug-12 00:03:41 INFO3 runcalib: Performing four scans on B2121+248 2008-Aug-12 00:03:41 LOG2 socket_wait: Starting sockwait on DATATAKING for 'Spider Scan' using string '1' 2008-Aug-12 00:03:41 LOG3 socket_wait: To DATATAKING: waittd 0 2008-Aug-12 00:03:41 START begin_task: Starting task 'waiting on Spider Scan' 2008-Aug-12 00:03:41 LOG5 begin_task: Level: (2) ID = <10019> Status = 0 0 0 0 ok 2008-Aug-12 00:03:41 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2048 2008-Aug-12 00:03:41 LOG4 got_cormsg: From DATATAKING: logOpen a2048.log 2008-Aug-12 00:03:41 LOG4 got_cormsg: From DATATAKING: 2008-Aug-12 00:03:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-12 00:03:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-12 00:03:41 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "B2121+248" 2008-Aug-12 00:03:41 LOG4 got_cormsg: From DATATAKING: set ra 212130.6 2008-Aug-12 00:03:41 LOG4 got_cormsg: From DATATAKING: vw% 212130.6 2008-Aug-12 00:03:41 LOG4 got_cormsg: From DATATAKING: 2008-Aug-12 00:03:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-12 00:03:41 LOG4 got_cormsg: From DATATAKING: set dec 245116 2008-Aug-12 00:03:41 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Aug-12 00:03:41 LOG4 got_cormsg: From DATATAKING: pnt tr 212130.6 245116 -CB 2008-Aug-12 00:03:41 LOG4 got_cormsg: From DATATAKING: dopsetvel 0.0 topo 2008-Aug-12 00:03:41 LOG4 got_cormsg: From DATATAKING: 245116 2008-Aug-12 00:03:41 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2008-Aug-12 00:03:41 LOG4 got_cormsg: From DATATAKING: calfile 2008-Aug-12 00:03:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-12 00:03:41 LOG4 got_cormsg: From DATATAKING: waittd 0 2008-Aug-12 00:03:41 LOG4 got_cormsg: From DATATAKING: 1 2008-Aug-12 00:03:41 STOP end_task: Finishing task 'waiting on Spider Scan' with status 'OK' 2008-Aug-12 00:03:41 LOG5 end_task: Level: (2) ID = <10019> Status = 0 0 0 0 ok 2008-Aug-12 00:03:41 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'Spider Scan' 2008-Aug-12 00:03:41 LOG3 vw_send: To DATATAKING: hdrldsrcnm "B2121+248" 2008-Aug-12 00:03:41 LOG3 vw_send: To DATATAKING: logLine "SRC KEY: lbw RCV: lbw SRC: B2121+248 toloop: 1" 2008-Aug-12 00:03:41 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_slew MESSAGE {Waiting for telescope to track source ...} 2008-Aug-12 00:03:41 LOG3 vw_send: To DATATAKING: calib lbw 212130.600000 245116.000000 -1 B 2008-Aug-12 00:03:41 LOG2 socket_wait: Starting sockwait on DATATAKING for 'Calibration spider scan' using string 'DONE' 2008-Aug-12 00:03:41 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-12 00:03:41 START begin_task: Starting task 'waiting on Calibration spider scan' 2008-Aug-12 00:03:41 LOG5 begin_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2008-Aug-12 00:03:41 LOG4 got_cormsg: From DATATAKING: 2008-Aug-12 00:03:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-12 00:03:41 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "B2121+248" 2008-Aug-12 00:03:41 LOG4 got_cormsg: From DATATAKING: logLine "SRC KEY: lbw RCV: lbw SRC: B2121+248 toloop: 1" 2008-Aug-12 00:03:41 LOG4 got_cormsg: From DATATAKING: vw% SRC KEY: lbw RCV: lbw SRC: B2121+248 toloop: 1 2008-Aug-12 00:03:41 LOG4 got_cormsg: From DATATAKING: calib lbw 212130.600000 245116.000000 -1 B 2008-Aug-12 00:03:41 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-12 00:03:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-12 00:03:57 LOG4 got_cormsg: From DATATAKING: io: tapeIo Off discIo On gioIo Off disc file: /share/olcor/calfile size: 0 2008-Aug-12 00:03:57 LOG4 got_cormsg: From DATATAKING: CALIB lbw 1175 1300 1375 1415 3.4 2008-Aug-12 00:04:10 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.34) to the zenith angle limit 19.69 degrees! 2008-Aug-12 00:04:10 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 246.6698 19.3352 RA/Dec = 21:23:20 +25:08:44 2008-Aug-12 00:08:47 LOG4 got_cormsg: From DATATAKING: measure pwr:az,za: -0.12018999999999997 0. 2008-Aug-12 00:08:47 LOG4 got_cormsg: From DATATAKING: sbc pwrRatio attn (range 0-15) 2008-Aug-12 00:08:47 LOG4 got_cormsg: From DATATAKING: 1 1.10 7 2008-Aug-12 00:08:47 LOG4 got_cormsg: From DATATAKING: 2 1.01 9 2008-Aug-12 00:08:47 LOG4 got_cormsg: From DATATAKING: 3 0.97 8 2008-Aug-12 00:08:47 LOG4 got_cormsg: From DATATAKING: 4 0.94 7 2008-Aug-12 00:08:47 LOG4 got_cormsg: From DATATAKING: 5 0.92 3 2008-Aug-12 00:08:47 LOG4 got_cormsg: From DATATAKING: 6 0.99 5 2008-Aug-12 00:08:47 LOG4 got_cormsg: From DATATAKING: 7 1.11 6 2008-Aug-12 00:08:47 LOG4 got_cormsg: From DATATAKING: 8 1.09 5 2008-Aug-12 00:08:47 LOG4 got_cormsg: From DATATAKING: if1Pwr -41.13 -38.54 (typical -40dbm) 2008-Aug-12 00:08:47 INFO3 got_cormsg: ICORR attenuators: (7 9) (8 7) (3 5) (6 5) dB 2008-Aug-12 00:08:47 INFO2 got_cormsg: ICORR power: (1.10 1.01) (0.97 0.94) (0.92 0.99) (1.11 1.09) 2008-Aug-12 00:09:01 LOG4 got_cormsg: From DATATAKING: calOn :822500001 start:541 2008-Aug-12 00:09:01 INFO2 got_cormsg: Scan number of calOn 822500001 2008-Aug-12 00:09:01 LOG4 send_obs_status: To obs_status: <1> TASKTIME 5 BITMAP stat_cal_on SCAN 822500001 MESSAGE {Taking CAL-ON spectra ...} 2008-Aug-12 00:09:07 LOG4 got_cormsg: From DATATAKING: calOff:822500002 start:547 2008-Aug-12 00:09:07 INFO2 got_cormsg: Scan number of calOff 822500002 2008-Aug-12 00:09:07 LOG4 send_obs_status: To obs_status: <1> TASKTIME 5 BITMAP stat_cal_off SCAN 822500002 MESSAGE {Taking CAL-OFF spectra ...} 2008-Aug-12 00:09:07 LOG4 send_obs_status_later: Pending obs_status for 5 seconds: TASKWAIT BITMAP stat_wait MESSAGE {Waiting for first strip ...} 2008-Aug-12 00:09:12 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_wait MESSAGE {Waiting for first strip ...} 2008-Aug-12 00:09:16 LOG4 got_cormsg: From DATATAKING: stp 0 scan 822500003 pos 212130.600000 245116.000000 off -0.170 0.000 tm 0:09:17 2008-Aug-12 00:09:16 INFO2 got_cormsg: Scan number of calibrate 0, scan 822500003 2008-Aug-12 00:09:16 LOG4 send_obs_status_later: Pending obs_status for 1 seconds: TASKTIME 60 BITMAP stat_spider_az PART 1 SCAN 822500003 MESSAGE {Taking azimuth scan ...} 2008-Aug-12 00:09:16 LOG4 send_obs_status_later: Pending obs_status for 61 seconds: TASKWAIT BITMAP stat_slew MESSAGE {Moving to elevation strip ...} 2008-Aug-12 00:09:17 LOG4 send_obs_status: To obs_status: <1> TASKTIME 60 BITMAP stat_spider_az PART 1 SCAN 822500003 MESSAGE {Taking azimuth scan ...} 2008-Aug-12 00:10:17 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_slew MESSAGE {Moving to elevation strip ...} 2008-Aug-12 00:10:35 LOG4 got_cormsg: From DATATAKING: stp 1 scan 822500004 pos 212130.600000 245116.000000 off 0.000 -0.170 tm 0:10:36 2008-Aug-12 00:10:35 INFO2 got_cormsg: Scan number of calibrate 1, scan 822500004 2008-Aug-12 00:10:35 LOG4 send_obs_status_later: Pending obs_status for 1 seconds: TASKTIME 60 BITMAP stat_spider_el PART 2 SCAN 822500004 MESSAGE {Taking elevation scan ...} 2008-Aug-12 00:10:35 LOG4 send_obs_status_later: Pending obs_status for 61 seconds: TASKWAIT BITMAP stat_slew MESSAGE {Moving to +45 deg strip ...} 2008-Aug-12 00:10:36 LOG4 send_obs_status: To obs_status: <1> TASKTIME 60 BITMAP stat_spider_el PART 2 SCAN 822500004 MESSAGE {Taking elevation scan ...} 2008-Aug-12 00:11:36 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_slew MESSAGE {Moving to +45 deg strip ...} 2008-Aug-12 00:11:52 LOG4 got_cormsg: From DATATAKING: stp 2 scan 822500005 pos 212130.600000 245116.000000 off -0.120 0.120 tm 0:11:53 2008-Aug-12 00:11:52 INFO2 got_cormsg: Scan number of calibrate 2, scan 822500005 2008-Aug-12 00:11:52 LOG4 send_obs_status_later: Pending obs_status for 1 seconds: TASKTIME 60 BITMAP stat_spider_diag1 PART 3 SCAN 822500005 MESSAGE {Taking +45 deg scan ...} 2008-Aug-12 00:11:52 LOG4 send_obs_status_later: Pending obs_status for 61 seconds: TASKWAIT BITMAP stat_slew MESSAGE {Moving to -45 deg strip ...} 2008-Aug-12 00:11:53 LOG4 send_obs_status: To obs_status: <1> TASKTIME 60 BITMAP stat_spider_diag1 PART 3 SCAN 822500005 MESSAGE {Taking +45 deg scan ...} 2008-Aug-12 00:12:53 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_slew MESSAGE {Moving to -45 deg strip ...} 2008-Aug-12 00:13:13 LOG4 got_cormsg: From DATATAKING: stp 3 scan 822500006 pos 212130.600000 245116.000000 off -0.120 -0.120 tm 0:13:14 2008-Aug-12 00:13:13 INFO2 got_cormsg: Scan number of calibrate 3, scan 822500006 2008-Aug-12 00:13:13 LOG4 send_obs_status_later: Pending obs_status for 1 seconds: TASKTIME 60 BITMAP stat_spider_diag2 PART 4 SCAN 822500006 MESSAGE {Taking -45 deg scan ...} 2008-Aug-12 00:13:14 LOG4 send_obs_status: To obs_status: <1> TASKTIME 60 BITMAP stat_spider_diag2 PART 4 SCAN 822500006 MESSAGE {Taking -45 deg scan ...} 2008-Aug-12 00:14:15 LOG4 got_cormsg: From DATATAKING: settinng up if2 2008-Aug-12 00:14:15 LOG4 got_cormsg: From DATATAKING: setting up if1lo 2008-Aug-12 00:14:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-12 00:14:15 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-12 00:14:15 STOP end_task: Finishing task 'waiting on Calibration spider scan' with status 'OK' 2008-Aug-12 00:14:15 LOG5 end_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2008-Aug-12 00:14:15 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'Calibration spider scan' 2008-Aug-12 00:14:15 INFO2 runcalib: Starting IDL calibrate reduction 2008-Aug-12 00:14:15 START begin_task: Starting task 'opening IDL window' 2008-Aug-12 00:14:15 LOG5 begin_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2008-Aug-12 00:14:15 INFO1 enable_idl: Opening IDL window 2008-Aug-12 00:14:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Opening IDL Window} TOTALLOOPS 1 TASKWAIT BITMAP stat_busy INFO {Opening IDL window ...} 2008-Aug-12 00:14:15 START begin_task: Starting task 'waiting on IDL starting' 2008-Aug-12 00:14:15 LOG5 begin_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2008-Aug-12 00:14:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-12 00:14:18 STOP end_task: Finishing task 'waiting on IDL starting' with status 'OK' 2008-Aug-12 00:14:18 LOG5 end_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2008-Aug-12 00:14:18 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Configuring IDL ...} 2008-Aug-12 00:14:18 LOG3 toidl: To IDL: window, 0, xs=1200, ys=700, colors=256 2008-Aug-12 00:14:18 LOG3 toidl: To IDL: .compile /home/aoui/develop/idl/xcutf3.pro 2008-Aug-12 00:14:18 LOG3 toidl: To IDL: .compile /home/aoui/develop/idl/pslandfix.pro 2008-Aug-12 00:14:18 LOG3 toidl: To IDL: .compile /home/aoui/develop/idl/spidercalib.pro 2008-Aug-12 00:14:18 LOG3 toidl: To IDL: .compile /home/aoui/develop/idl/getcolor.pro 2008-Aug-12 00:14:18 LOG3 toidl: To IDL: colors = GetColor(/Load) 2008-Aug-12 00:14:18 LOG3 enable_idl: To OBSERVER: global user ; set user(idl_status) enabled 2008-Aug-12 00:14:18 STOP finish_task: Finishing task 'opening IDL window' 2008-Aug-12 00:14:18 LOG5 finish_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2008-Aug-12 00:14:18 INFO2 finish_task: DONE finished opening: IDL window 2008-Aug-12 00:14:18 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-12 00:14:18 STOP end_task: Finishing task 'opening IDL window' with status 'OK' 2008-Aug-12 00:14:18 LOG5 end_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2008-Aug-12 00:14:18 LOG3 toidl: To IDL: file = '/share/olcor/calfile' 2008-Aug-12 00:14:18 LOG3 toidl: To IDL: scanstart = 822500001 2008-Aug-12 00:14:18 LOG3 toidl: To IDL: fluxcoeffs = [4.2180, -0.9670, -2.2880 ] 2008-Aug-12 00:14:18 LOG3 toidl: To IDL: printout = 0 2008-Aug-12 00:14:18 LOG3 toidl: To IDL: @/home/aoui/develop/idl/calib.idl 2008-Aug-12 00:14:18 LOG3 toidl: To IDL: printout = 1 2008-Aug-12 00:14:18 LOG3 toidl: To IDL: @/home/aoui/develop/idl/calib.idl 2008-Aug-12 00:14:18 LOG3 toidl: To IDL: $lp /tmp/gui.ps 2008-Aug-12 00:14:19 LOG3 toidl: To IDL: $/bin/cp /tmp/gui.ps /share/obs4/usr/a2048/spider_54690_822500001.ps 2008-Aug-12 00:14:19 INFO2 runcalib: Saving calib result in /share/obs4/usr/a2048/spider_54690_822500001.ps 2008-Aug-12 00:14:19 LOG3 vw_send: To DATATAKING: monfile 2008-Aug-12 00:14:19 LOG4 send_obs_status: To obs_status: <1> ICORRFILENAME corfile 2008-Aug-12 00:14:19 START begin_task: Starting task 'restoring previous configuration' 2008-Aug-12 00:14:19 LOG5 begin_task: Level: (2) ID = <10023> Status = 0 0 0 0 ok 2008-Aug-12 00:14:19 NOTE restore_icorr: Restoring previous IF/LO set-up 2008-Aug-12 00:14:19 START begin_task: Starting task 'configuring IF/LO path' 2008-Aug-12 00:14:19 LOG5 begin_task: Level: (3) ID = <10024> Status = 0 0 0 0 ok 2008-Aug-12 00:14:19 INFO1 config_iflo: Starting to configure IF/LO path for L-Band Wide 2008-Aug-12 00:14:19 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Aug-12 00:14:19 LOG1 config_iflo: Receiver L-Band Wide already selected 2008-Aug-12 00:14:19 LOG3 config_iflo: Skipping polarizer command 'lbwpol lin' since system already is properly set 2008-Aug-12 00:14:19 LOG3 vw_send: To DATATAKING: lbfb 7 2008-Aug-12 00:14:19 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2008-Aug-12 00:14:19 LOG3 send_ifx: Skipping if1-command 'if1_shcl F' since system already is properly set 2008-Aug-12 00:14:19 LOG3 send_ifx: Skipping if1-command 'if1_rfnum 5' since system already is properly set 2008-Aug-12 00:14:19 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2008-Aug-12 00:14:19 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 7 5' since system already is properly set 2008-Aug-12 00:14:19 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 4} 2008-Aug-12 00:14:19 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 11420405752.0} 2008-Aug-12 00:14:19 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2008-Aug-12 00:14:19 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2008-Aug-12 00:14:19 LOG3 send_ifx: Skipping if1-command 'if1_ac2sw 0' since system already is properly set 2008-Aug-12 00:14:19 LOG3 send_ifx: Skipping if1-command 'if1_phbsig 0' since system already is properly set 2008-Aug-12 00:14:19 LOG3 send_ifx: Skipping if1-command 'if1_hybrid F' since system already is properly set 2008-Aug-12 00:14:19 LOG3 send_ifx: Skipping if1-command 'if1_phblo 0' since system already is properly set 2008-Aug-12 00:14:19 LOG3 send_ifx: Skipping if1-command 'if1_750nb F' since system already is properly set 2008-Aug-12 00:14:19 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2008-Aug-12 00:14:19 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 5' since system already is properly set 2008-Aug-12 00:14:19 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2008-Aug-12 00:14:19 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2008-Aug-12 00:14:19 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Aug-12 00:14:19 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq 1500} 2008-Aug-12 00:14:19 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 1500 1500 1500 1500 1500 1500 1500 1500} 2008-Aug-12 00:14:19 LOG3 send_ifx: Skipping if2-command 'if2_vlbainp 750' since system already is properly set 2008-Aug-12 00:14:19 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0} 2008-Aug-12 00:14:19 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2008-Aug-12 00:14:19 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2008-Aug-12 00:14:19 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Aug-12 00:14:19 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2008-Aug-12 00:14:19 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2008-Aug-12 00:14:19 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Aug-12 00:14:19 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-12 00:14:19 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Aug-12 00:14:19 LOG5 begin_task: Level: (4) ID = <10025> Status = 0 0 0 0 ok 2008-Aug-12 00:14:19 LOG4 got_idlmsg: From IDL: /share/olcor/calfile 2008-Aug-12 00:14:19 LOG4 got_cormsg: From DATATAKING: monfile 2008-Aug-12 00:14:19 LOG4 got_idlmsg: From IDL: POSITIONING FILE TO SCAN 822500001 2008-Aug-12 00:14:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-12 00:14:19 LOG4 got_cormsg: From DATATAKING: lbfb 7 2008-Aug-12 00:14:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 4} 2008-Aug-12 00:14:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 11420405752.0} 2008-Aug-12 00:14:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Aug-12 00:14:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq 1500} 2008-Aug-12 00:14:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 1500 1500 1500 1500 1500 1500 1500 1500} 2008-Aug-12 00:14:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0} 2008-Aug-12 00:14:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-12 00:14:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2008-Aug-12 00:14:19 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-12 00:14:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-12 00:14:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-12 00:14:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-12 00:14:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-12 00:14:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-12 00:14:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-12 00:14:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-12 00:14:24 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-12 00:14:24 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Aug-12 00:14:24 LOG5 end_task: Level: (4) ID = <10025> Status = 0 0 0 0 ok 2008-Aug-12 00:14:24 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Aug-12 00:14:24 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Aug-12 00:14:24 LOG5 finish_task: Level: (3) ID = <10024> Status = 0 0 0 0 ok 2008-Aug-12 00:14:24 INFO3 finish_task: DONE finished configuration: IF/LO path 2008-Aug-12 00:14:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-12 00:14:24 STOP end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Aug-12 00:14:24 LOG5 end_task: Level: (3) ID = <10024> Status = 0 0 0 0 ok 2008-Aug-12 00:14:24 LOG1 restore_icorr: Skipping restoration of interim correlator configuration, since it is not selected for use 2008-Aug-12 00:14:24 STOP end_task: Finishing task 'restoring previous configuration' with status 'OK' 2008-Aug-12 00:14:24 LOG5 end_task: Level: (2) ID = <10023> Status = 0 0 0 0 ok 2008-Aug-12 00:14:24 STOP finish_task: Finishing task 'calibration spider scan' 2008-Aug-12 00:14:24 LOG5 finish_task: Level: (1) ID = <10017> Status = 0 0 0 0 ok 2008-Aug-12 00:14:24 DONE finish_task: DONE finished pattern: calibration spider scan 2008-Aug-12 00:14:24 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Aug-12 00:14:24 END end_task: Finishing task 'calibration spider scan' with status 'OK' 2008-Aug-12 00:14:24 LOG5 end_task: Level: (1) ID = <10017> Status = 0 0 0 0 ok 2008-Aug-12 00:14:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-12 00:14:25 LOG4 got_idlmsg: From IDL: % Program caused arithmetic error: Floating underflow 2008-Aug-12 00:14:25 LOG4 got_idlmsg: From IDL: % Program caused arithmetic error: Floating illegal operand 2008-Aug-12 00:14:26 LOG4 got_idlmsg: From IDL: /share/olcor/calfile 2008-Aug-12 00:14:26 LOG4 got_idlmsg: From IDL: POSITIONING FILE TO SCAN 822500001 2008-Aug-12 00:14:31 LOG4 got_idlmsg: From IDL: % Program caused arithmetic error: Floating underflow 2008-Aug-12 00:14:31 LOG4 got_idlmsg: From IDL: % Program caused arithmetic error: Floating illegal operand 2008-Aug-12 00:14:31 LOG4 got_idlmsg: From IDL: /share/olcor/calfile 2008-Aug-12 00:14:31 LOG4 got_idlmsg: From IDL: POSITIONING FILE TO SCAN 822500001 2008-Aug-12 00:14:36 LOG4 got_idlmsg: From IDL: % Program caused arithmetic error: Floating underflow 2008-Aug-12 00:14:36 LOG4 got_idlmsg: From IDL: % Program caused arithmetic error: Floating illegal operand 2008-Aug-12 00:14:36 LOG4 got_idlmsg: From IDL: /share/olcor/calfile 2008-Aug-12 00:14:36 LOG4 got_idlmsg: From IDL: POSITIONING FILE TO SCAN 822500001 2008-Aug-12 00:14:41 LOG4 got_idlmsg: From IDL: % Program caused arithmetic error: Floating underflow 2008-Aug-12 00:14:41 LOG4 got_idlmsg: From IDL: % Program caused arithmetic error: Floating illegal operand 2008-Aug-12 00:14:41 LOG4 got_idlmsg: From IDL: /share/olcor/calfile 2008-Aug-12 00:14:41 LOG4 got_idlmsg: From IDL: POSITIONING FILE TO SCAN 822500001 2008-Aug-12 00:14:47 LOG4 got_idlmsg: From IDL: % Program caused arithmetic error: Floating underflow 2008-Aug-12 00:14:47 LOG4 got_idlmsg: From IDL: % Program caused arithmetic error: Floating illegal operand 2008-Aug-12 00:14:47 LOG4 got_idlmsg: From IDL: /share/olcor/calfile 2008-Aug-12 00:14:47 LOG4 got_idlmsg: From IDL: POSITIONING FILE TO SCAN 822500001 2008-Aug-12 00:14:49 COMMAND CIMA-send_to_exec: Sending command to point to a source 2008-Aug-12 00:14:49 LOG4 exec_msg: From OBSERVER: track_new_source J223823+245208 223823.9 245208 J 0 0 main small /share/obs4/usr/a2048/n7332fu.cat 15259 Topocentric velocity(optical) 0 0 0.0 0.0 0 2008-Aug-12 00:14:49 LOG1 track_new_source: Calling 'track_new_source J223823+245208 223823.9 245208 J 0 0 main small /share/obs4/usr/a2048/n7332fu.cat 15259 Topocentric velocity(optical) 0 0 0.0 0.0 0' 2008-Aug-12 00:14:49 BEGIN begin_task: Starting task 'selecting new source' 2008-Aug-12 00:14:49 LOG5 begin_task: Level: (1) ID = <10026> Status = 0 0 0 0 ok 2008-Aug-12 00:14:49 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {J223823+245208} INFO {Selecting source 'J223823+245208' ...} 2008-Aug-12 00:14:49 LOG3 track_source: Calling 'track_source J223823+245208 223823.9 245208 J 0 0 main small /share/obs4/usr/a2048/n7332fu.cat 15259 Topocentric velocity(optical)' 2008-Aug-12 00:14:49 START begin_task: Starting task 'sending tracking commands' 2008-Aug-12 00:14:49 LOG5 begin_task: Level: (2) ID = <10027> Status = 0 0 0 0 ok 2008-Aug-12 00:14:49 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {J223823+245208} INFO {Slewing to source 'J223823+245208' ...} 2008-Aug-12 00:14:49 INFO1 track_source: Starting to track J223823+245208 2008-Aug-12 00:14:49 LOG3 vw_send: To DATATAKING: hdrldsrcnm "J223823+245208" 2008-Aug-12 00:14:49 LOG3 vw_send: To DATATAKING: set ra 223823.9 2008-Aug-12 00:14:49 LOG3 vw_send: To DATATAKING: set dec 245208 2008-Aug-12 00:14:49 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Aug-12 00:14:49 LOG3 vw_send: To DATATAKING: pnt tr 223823.9 245208 -CJ 2008-Aug-12 00:14:49 LOG3 vw_send: To DATATAKING: dopsetvel 15259 topo 2008-Aug-12 00:14:49 STOP finish_task: Finishing task 'sending tracking commands' 2008-Aug-12 00:14:49 LOG5 finish_task: Level: (2) ID = <10027> Status = 0 0 0 0 ok 2008-Aug-12 00:14:49 INFO2 finish_task: DONE finished sending: tracking commands 2008-Aug-12 00:14:49 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-12 00:14:49 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Aug-12 00:14:49 LOG5 end_task: Level: (2) ID = <10027> Status = 0 0 0 0 ok 2008-Aug-12 00:14:49 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0.0 0.0 0' 2008-Aug-12 00:14:49 START begin_task: Starting task 'applying pointing corrections' 2008-Aug-12 00:14:49 LOG5 begin_task: Level: (2) ID = <10028> Status = 0 0 0 0 ok 2008-Aug-12 00:14:49 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2008-Aug-12 00:14:49 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2008-Aug-12 00:14:49 STOP finish_task: Finishing task 'applying pointing corrections' 2008-Aug-12 00:14:49 LOG5 finish_task: Level: (2) ID = <10028> Status = 0 0 0 0 ok 2008-Aug-12 00:14:49 INFO2 finish_task: DONE finished applying: pointing corrections 2008-Aug-12 00:14:49 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-12 00:14:49 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2008-Aug-12 00:14:49 LOG5 end_task: Level: (2) ID = <10028> Status = 0 0 0 0 ok 2008-Aug-12 00:14:49 STOP finish_task: Finishing task 'selecting new source' 2008-Aug-12 00:14:49 LOG5 finish_task: Level: (1) ID = <10026> Status = 0 0 0 0 ok 2008-Aug-12 00:14:49 DONE finish_task: DONE finished selecting: new source 2008-Aug-12 00:14:49 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Aug-12 00:14:49 END end_task: Finishing task 'selecting new source' with status 'OK' 2008-Aug-12 00:14:49 LOG5 end_task: Level: (1) ID = <10026> Status = 0 0 0 0 ok 2008-Aug-12 00:14:49 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "J223823+245208" 2008-Aug-12 00:14:49 LOG4 got_cormsg: From DATATAKING: set ra 223823.9 2008-Aug-12 00:14:49 LOG4 got_cormsg: From DATATAKING: set dec 245208 2008-Aug-12 00:14:49 LOG4 got_cormsg: From DATATAKING: vw% 223823.9 2008-Aug-12 00:14:49 LOG4 got_cormsg: From DATATAKING: vw% 245208 2008-Aug-12 00:14:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-12 00:14:49 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Aug-12 00:14:49 LOG4 got_cormsg: From DATATAKING: pnt tr 223823.9 245208 -CJ 2008-Aug-12 00:14:49 LOG4 got_cormsg: From DATATAKING: dopsetvel 15259 topo 2008-Aug-12 00:14:49 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Aug-12 00:14:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-12 00:14:49 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2008-Aug-12 00:14:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-12 00:14:52 LOG4 got_idlmsg: From IDL: % Program caused arithmetic error: Floating underflow 2008-Aug-12 00:14:52 LOG4 got_idlmsg: From IDL: % Program caused arithmetic error: Floating illegal operand 2008-Aug-12 00:14:53 LOG4 got_idlmsg: From IDL: /share/olcor/calfile 2008-Aug-12 00:14:53 LOG4 got_idlmsg: From IDL: POSITIONING FILE TO SCAN 822500001 2008-Aug-12 00:14:57 LOG4 got_idlmsg: From IDL: % Program caused arithmetic error: Floating underflow 2008-Aug-12 00:14:57 LOG4 got_idlmsg: From IDL: % Program caused arithmetic error: Floating illegal operand 2008-Aug-12 00:14:58 LOG4 got_idlmsg: From IDL: /share/olcor/calfile 2008-Aug-12 00:14:58 LOG4 got_idlmsg: From IDL: POSITIONING FILE TO SCAN 822500001 2008-Aug-12 00:15:03 LOG4 got_idlmsg: From IDL: % Program caused arithmetic error: Floating underflow 2008-Aug-12 00:15:03 LOG4 got_idlmsg: From IDL: % Program caused arithmetic error: Floating illegal operand 2008-Aug-12 00:15:03 COMMAND CIMA-send_to_exec: Sending command to run standard on/off 2008-Aug-12 00:15:03 LOG4 exec_msg: From OBSERVER: onoff 1 300 60 hcorcal 10 each first 0 2008-Aug-12 00:15:03 LOG1 onoff_wapp: Calling 'onoff_wapp 1 300 60 hcorcal 10 each first 0' 2008-Aug-12 00:15:03 BEGIN begin_task: Starting task 'standard on/off' 2008-Aug-12 00:15:03 LOG5 begin_task: Level: (1) ID = <10029> Status = 0 0 0 0 ok 2008-Aug-12 00:15:03 INFO4 begin_task: MAKING 'standard on/off' using 'lbw' + 'WAPP' on 'J223823+245208' 2008-Aug-12 00:15:03 INFO1 onoff_wapp: Starting pattern: Standard on/off 2008-Aug-12 00:15:03 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Standard on/off} TOTALLOOPS 1 INFO {Starting standard on/off observation ...} 2008-Aug-12 00:15:03 START begin_task: Starting task 'waiting on telescope' 2008-Aug-12 00:15:03 LOG5 begin_task: Level: (2) ID = <10030> Status = 0 0 0 0 ok 2008-Aug-12 00:15:03 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Aug-12 00:15:03 LOG3 waittrk: Start waittrk 5 2008-Aug-12 00:15:03 START begin_task: Starting task 'waiting on telescope movement' 2008-Aug-12 00:15:03 LOG5 begin_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2008-Aug-12 00:15:04 LOG4 got_idlmsg: From IDL: request id is hp0-537 (1 file) 2008-Aug-12 00:15:08 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Aug-12 00:15:08 LOG5 end_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2008-Aug-12 00:15:08 START begin_task: Starting task 'waiting on telescope on source' 2008-Aug-12 00:15:08 LOG5 begin_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2008-Aug-12 00:19:40 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.32) to the zenith angle limit 19.69 degrees! 2008-Aug-12 00:19:40 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 246.9943 19.3236 RA/Dec = 22:38:24 +24:52:08 2008-Aug-12 00:21:10 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.69) to the zenith angle limit 19.69 degrees! 2008-Aug-12 00:21:10 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 246.7339 19.6900 RA/Dec = 22:38:24 +24:52:08 2008-Aug-12 00:21:40 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.69) to the zenith angle limit 19.69 degrees! 2008-Aug-12 00:21:40 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 246.6444 19.6900 RA/Dec = 22:38:24 +24:52:08 2008-Aug-12 00:21:59 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Aug-12 00:21:59 LOG5 end_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2008-Aug-12 00:21:59 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Aug-12 00:21:59 INFO2 waittrk: Now tracking J223823+245208 2008-Aug-12 00:21:59 LOG4 waittrk: Current telescope position: Az = 246.59 ZA = 19.67 2008-Aug-12 00:21:59 STOP finish_task: Finishing task 'waiting on telescope' 2008-Aug-12 00:21:59 LOG5 finish_task: Level: (2) ID = <10030> Status = 0 0 0 0 ok 2008-Aug-12 00:21:59 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Aug-12 00:21:59 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-12 00:21:59 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Aug-12 00:21:59 LOG5 end_task: Level: (2) ID = <10030> Status = 0 0 0 0 ok 2008-Aug-12 00:21:59 START begin_task: Starting task 'selecting calibration type' 2008-Aug-12 00:21:59 LOG5 begin_task: Level: (2) ID = <10033> Status = 0 0 0 0 ok 2008-Aug-12 00:21:59 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Aug-12 00:22:00 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Aug-12 00:22:00 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-12 00:22:00 START begin_task: Starting task 'waiting on setcal' 2008-Aug-12 00:22:00 LOG5 begin_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2008-Aug-12 00:22:00 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Aug-12 00:22:00 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-12 00:22:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-12 00:22:00 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-12 00:22:00 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Aug-12 00:22:00 LOG5 end_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2008-Aug-12 00:22:00 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Aug-12 00:22:00 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Aug-12 00:22:00 LOG5 end_task: Level: (2) ID = <10033> Status = 0 0 0 0 ok 2008-Aug-12 00:22:00 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 RM 2008-Aug-12 00:22:00 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 RM 2008-Aug-12 00:22:00 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 RM 2008-Aug-12 00:22:00 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 RM 2008-Aug-12 00:22:00 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20080811.a2048.0013.fits' is empty! 2008-Aug-12 00:22:00 INFO2 onoff_wapp: Starting standard on/off loop 1 of 1 2008-Aug-12 00:22:00 LOG4 send_obs_status: To obs_status: <1> LOOP 1 TOTALPARTS 2 PART 1 INFO {Making ON observation followed by OFF} 2008-Aug-12 00:22:00 START begin_task: Starting task 'clearing telescope offsets' 2008-Aug-12 00:22:00 LOG5 begin_task: Level: (2) ID = <10035> Status = 0 0 0 0 ok 2008-Aug-12 00:22:00 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Clearing Telescope Offsets} INFO {Removing telescope offsets ...} 2008-Aug-12 00:22:00 INFO3 clear_offsets: Removing telescope offsets 2008-Aug-12 00:22:00 LOG3 vw_send: To DATATAKING: hdrldsrcnm "J223823+245208" 2008-Aug-12 00:22:00 LOG3 vw_send: To DATATAKING: pnt tr 223823.900000 245208.000000 -CJ 2008-Aug-12 00:22:00 STOP finish_task: Finishing task 'clearing telescope offsets' 2008-Aug-12 00:22:00 LOG5 finish_task: Level: (2) ID = <10035> Status = 0 0 0 0 ok 2008-Aug-12 00:22:00 INFO2 finish_task: DONE finished clearing: telescope offsets 2008-Aug-12 00:22:00 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-12 00:22:00 STOP end_task: Finishing task 'clearing telescope offsets' with status 'OK' 2008-Aug-12 00:22:00 LOG5 end_task: Level: (2) ID = <10035> Status = 0 0 0 0 ok 2008-Aug-12 00:22:00 START begin_task: Starting task 'waiting on telescope' 2008-Aug-12 00:22:00 LOG5 begin_task: Level: (2) ID = <10036> Status = 0 0 0 0 ok 2008-Aug-12 00:22:00 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Aug-12 00:22:00 LOG3 waittrk: Start waittrk 5 2008-Aug-12 00:22:00 START begin_task: Starting task 'waiting on telescope movement' 2008-Aug-12 00:22:00 LOG5 begin_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2008-Aug-12 00:22:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-12 00:22:00 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "J223823+245208" 2008-Aug-12 00:22:00 LOG4 got_cormsg: From DATATAKING: pnt tr 223823.900000 245208.000000 -CJ 2008-Aug-12 00:22:00 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Aug-12 00:22:00 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 RM' 2008-Aug-12 00:22:05 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Aug-12 00:22:05 LOG5 end_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2008-Aug-12 00:22:05 START begin_task: Starting task 'waiting on telescope on source' 2008-Aug-12 00:22:05 LOG5 begin_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2008-Aug-12 00:22:07 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Aug-12 00:22:07 LOG5 end_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2008-Aug-12 00:22:07 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Aug-12 00:22:07 INFO2 waittrk: Now tracking J223823+245208 2008-Aug-12 00:22:07 LOG4 waittrk: Current telescope position: Az = 246.56 ZA = 19.64 2008-Aug-12 00:22:07 STOP finish_task: Finishing task 'waiting on telescope' 2008-Aug-12 00:22:07 LOG5 finish_task: Level: (2) ID = <10036> Status = 0 0 0 0 ok 2008-Aug-12 00:22:07 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Aug-12 00:22:07 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-12 00:22:07 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Aug-12 00:22:07 LOG5 end_task: Level: (2) ID = <10036> Status = 0 0 0 0 ok 2008-Aug-12 00:22:07 LOG5 antvel: Calling 'antvel 223823.900000 245208.000000 J 0' 2008-Aug-12 00:22:07 LOG2 antvel: Precessing RA = 22:38:23.9 Dec = +24:52:08.0 Epoch = 2008.61606 J 2008-Aug-12 00:22:07 LOG2 antvel: Computed apparent RA = 22:38:50.4 Dec = +24:54:55.1 2008-Aug-12 00:22:07 LOG2 antvel: Parameters to Doppler: Topocentric 15727 2008 225 0.0 2008-Aug-12 00:22:07 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-12 00:22:07 LOG3 dopset_gen: Parameters for 'rest2sky': vel=15259.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Aug-12 00:22:07 INFO4 dopset_gen: New sky frequencies: 1351.610732 1351.610732 1351.610732 1351.610732 1351.610732 1351.610732 1351.610732 1351.610732 1351.610732 2008-Aug-12 00:22:07 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1351.610732 sky0=1351.610732 sky1=1351.610732 sky2=1351.610732 sky3=1351.610732 sky4=1351.610732 sky5=1351.610732 sky6=1351.610732 sky7=1351.610732 dest0=275 dest1=275 dest2=275 dest3=275 dest4=275 dest5=275 dest6=275 dest7=275 2008-Aug-12 00:22:07 LOG2 dopset_gen: Result from 'sky2syn': 11351.610732 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 2 2 2 2 2 2 2 2 2008-Aug-12 00:22:07 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 11351610732.0} 2008-Aug-12 00:22:07 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0} 2008-Aug-12 00:22:08 START begin_task: Starting task 'adjusting WAPP power' 2008-Aug-12 00:22:08 LOG5 begin_task: Level: (2) ID = <10039> Status = 0 0 0 0 ok 2008-Aug-12 00:22:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Aug-12 00:22:08 INFO2 adjust_power: Starting to adjust WAPP power 2008-Aug-12 00:22:08 LOG3 vw_send: To DATATAKING: adjpwrif1 2008-Aug-12 00:22:08 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif1' using string 'DONE' 2008-Aug-12 00:22:08 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-12 00:22:08 START begin_task: Starting task 'waiting on adjpwrif1' 2008-Aug-12 00:22:08 LOG5 begin_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2008-Aug-12 00:22:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 11351610732.0} 2008-Aug-12 00:22:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0} 2008-Aug-12 00:22:08 LOG4 got_cormsg: From DATATAKING: adjpwrif1 2008-Aug-12 00:22:08 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-12 00:22:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-12 00:22:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-12 00:22:10 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.63) to the zenith angle limit 19.69 degrees! 2008-Aug-12 00:22:10 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 246.5540 19.6342 RA/Dec = 22:38:24 +24:52:08 2008-Aug-12 00:22:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-12 00:22:10 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-12 00:22:10 STOP end_task: Finishing task 'waiting on adjpwrif1' with status 'OK' 2008-Aug-12 00:22:10 LOG5 end_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2008-Aug-12 00:22:10 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif1' 2008-Aug-12 00:22:10 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Aug-12 00:22:10 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Aug-12 00:22:10 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-12 00:22:10 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Aug-12 00:22:10 LOG5 begin_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2008-Aug-12 00:22:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-12 00:22:11 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Aug-12 00:22:11 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-12 00:22:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-12 00:22:13 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-12 00:22:13 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Aug-12 00:22:13 LOG5 end_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2008-Aug-12 00:22:13 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Aug-12 00:22:13 START begin_task: Starting task 'adjusting WAPP power' 2008-Aug-12 00:22:13 LOG5 begin_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2008-Aug-12 00:22:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Aug-12 00:22:13 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 50 2 1 0 0 0 2008-Aug-12 00:22:13 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 50 2 1 1 0 0 2008-Aug-12 00:22:13 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 25 2 1 0 0 0 2008-Aug-12 00:22:13 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 25 2 1 1 0 0 2008-Aug-12 00:22:13 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Aug-12 00:22:13 LOG5 begin_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2008-Aug-12 00:22:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-12 00:22:14 INFO2 WAPP=1-auto_atten_oneboard: Attenuators: 14 4 dB 2008-Aug-12 00:22:14 LOG4 WAPP=4-wappcon: Received command 'ADJUSTPOWER 25 2 1 1 0 0' 2008-Aug-12 00:22:14 LOG4 WAPP=3-wappcon: Received command 'ADJUSTPOWER 25 2 1 0 0 0' 2008-Aug-12 00:22:14 LOG4 WAPP=2-wappcon: Received command 'ADJUSTPOWER 50 2 1 1 0 0' 2008-Aug-12 00:22:14 LOG4 WAPP=1-wappcon: Received command 'ADJUSTPOWER 50 2 1 0 0 0' 2008-Aug-12 00:22:14 INFO2 WAPP=3-auto_atten_oneboard: Attenuators: 15 2 dB 2008-Aug-12 00:22:14 INFO2 WAPP=2-auto_atten_oneboard: Attenuators: 4 13 dB 2008-Aug-12 00:22:14 INFO2 WAPP=4-auto_atten_oneboard: Attenuators: 1 15 dB 2008-Aug-12 00:22:14 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Aug-12 00:22:14 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Aug-12 00:22:14 LOG5 end_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2008-Aug-12 00:22:14 INFO2 wapp_adjpwr: WAPP power: 0.903 1.003 1.326 1.271 2008-Aug-12 00:22:14 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Aug-12 00:22:14 LOG5 finish_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2008-Aug-12 00:22:14 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Aug-12 00:22:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-12 00:22:14 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Aug-12 00:22:14 LOG5 end_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2008-Aug-12 00:22:14 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Aug-12 00:22:14 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Aug-12 00:22:14 LOG5 finish_task: Level: (2) ID = <10039> Status = 0 0 0 0 ok 2008-Aug-12 00:22:14 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Aug-12 00:22:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-12 00:22:14 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Aug-12 00:22:14 LOG5 end_task: Level: (2) ID = <10039> Status = 0 0 0 0 ok 2008-Aug-12 00:22:14 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_onoff_on MESSAGE {Taking ON scan ...} 2008-Aug-12 00:22:14 LOG4 take_data: Calling 'take_data 300 1 ONOFF ON -' 2008-Aug-12 00:22:14 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-12 00:22:14 LOG5 begin_task: Level: (2) ID = <10044> Status = 0 0 0 0 ok 2008-Aug-12 00:22:14 INFO2 take_data: Starting WAPP scan: 822500001 2008-Aug-12 00:22:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 300 2008-Aug-12 00:22:15 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-12 00:22:15 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2008-Aug-12 00:22:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-12 00:22:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 15736.00 2008-Aug-12 00:22:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11351.610732 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2008-Aug-12 00:22:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1351.610732 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2008-Aug-12 00:22:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1351.610732 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2008-Aug-12 00:22:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1351.610732 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2008-Aug-12 00:22:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1351.610732 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2008-Aug-12 00:22:40 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.52) to the zenith angle limit 19.69 degrees! 2008-Aug-12 00:22:40 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 246.4620 19.5244 RA/Dec = 22:38:24 +24:52:08 2008-Aug-12 00:23:10 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.41) to the zenith angle limit 19.69 degrees! 2008-Aug-12 00:23:10 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 246.3686 19.4148 RA/Dec = 22:38:24 +24:52:08 2008-Aug-12 00:24:40 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.09) to the zenith angle limit 19.69 degrees! 2008-Aug-12 00:24:40 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 246.0805 19.0863 RA/Dec = 22:38:24 +24:52:08 2008-Aug-12 00:27:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-12 00:27:16 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-12 00:27:16 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2008-Aug-12 00:27:16 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-12 00:27:16 LOG5 end_task: Level: (2) ID = <10044> Status = 0 0 0 0 ok 2008-Aug-12 00:27:16 LOG4 send_obs_status: To obs_status: <1> PART 2 INFO {Waiting for OFF observation followed by CAL} 2008-Aug-12 00:27:16 LOG2 onoff_wapp: Parameters: RA-offset: -90.707100000001049 arcminutes wait: 60 secs 2008-Aug-12 00:27:16 LOG4 track_offsets: Calling 'track_offsets -90.707100000001049 0.0 main small' 2008-Aug-12 00:27:16 START begin_task: Starting task 'sending telescope offsets' 2008-Aug-12 00:27:16 LOG5 begin_task: Level: (2) ID = <10046> Status = 0 0 0 0 ok 2008-Aug-12 00:27:16 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Telescope Offsets} INFO {Changing telescope offsets ...} 2008-Aug-12 00:27:16 INFO2 track_offsets: Starting to send new offsets 2008-Aug-12 00:27:16 LOG3 vw_send: To DATATAKING: hdrldsrcnm "J223823+245208" 2008-Aug-12 00:27:16 LOG3 vw_send: To DATATAKING: pnt tr 223823.900000 245208.000000 -CJ -o -UD -1.51179 0.0 -CH 2008-Aug-12 00:27:16 STOP finish_task: Finishing task 'sending telescope offsets' 2008-Aug-12 00:27:16 LOG5 finish_task: Level: (2) ID = <10046> Status = 0 0 0 0 ok 2008-Aug-12 00:27:16 INFO2 finish_task: DONE finished sending: telescope offsets 2008-Aug-12 00:27:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-12 00:27:16 STOP end_task: Finishing task 'sending telescope offsets' with status 'OK' 2008-Aug-12 00:27:16 LOG5 end_task: Level: (2) ID = <10046> Status = 0 0 0 0 ok 2008-Aug-12 00:27:16 INFO2 lstwait: Waiting for 59.8 secs from LST 21:24:13 to LST 21:25:13 ... 2008-Aug-12 00:27:16 LOG4 send_obs_status: To obs_status: <1> TASKTIME 59.836175999996598 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Aug-12 00:27:16 START begin_task: Starting task 'waiting on wait on LST' 2008-Aug-12 00:27:16 LOG5 begin_task: Level: (2) ID = <10047> Status = 0 0 0 0 ok 2008-Aug-12 00:27:16 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "J223823+245208" 2008-Aug-12 00:27:16 LOG4 got_cormsg: From DATATAKING: pnt tr 223823.900000 245208.000000 -CJ -o -UD -1.51179 0.0 -CH 2008-Aug-12 00:27:16 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Aug-12 00:27:40 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.35) to the zenith angle limit 19.69 degrees! 2008-Aug-12 00:27:40 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 246.6482 19.3528 RA/Dec = 22:44:27 +24:52:06 2008-Aug-12 00:28:01 INFO4 wait_and_tell_when_on_source: Telescope is now on source 'J223823+245208' (after 45 seconds) 2008-Aug-12 00:28:16 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Aug-12 00:28:16 LOG5 end_task: Level: (2) ID = <10047> Status = 0 0 0 0 ok 2008-Aug-12 00:28:16 LOG4 lstwait: Finished waiting 1.17 seconds late 2008-Aug-12 00:28:16 INFO3 lstwait: Finished waiting 2008-Aug-12 00:28:16 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Aug-12 00:28:16 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_onoff_off MESSAGE {Taking OFF scan ...} 2008-Aug-12 00:28:16 LOG4 take_data: Calling 'take_data 300 1 ONOFF OFF -' 2008-Aug-12 00:28:16 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-12 00:28:16 LOG5 begin_task: Level: (2) ID = <10048> Status = 0 0 0 0 ok 2008-Aug-12 00:28:16 INFO2 take_data: Starting WAPP scan: 822500002 2008-Aug-12 00:28:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 300 2008-Aug-12 00:28:17 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-12 00:28:17 LOG5 begin_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2008-Aug-12 00:28:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-12 00:28:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16098.00 2008-Aug-12 00:28:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11351.610732 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2008-Aug-12 00:28:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1351.610732 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2008-Aug-12 00:28:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1351.610732 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2008-Aug-12 00:28:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1351.610732 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2008-Aug-12 00:28:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1351.610732 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2008-Aug-12 00:29:10 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.42) to the zenith angle limit 19.69 degrees! 2008-Aug-12 00:29:10 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 246.3736 19.4216 RA/Dec = 22:44:27 +24:52:06 2008-Aug-12 00:30:40 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.09) to the zenith angle limit 19.69 degrees! 2008-Aug-12 00:30:40 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 246.0860 19.0930 RA/Dec = 22:44:27 +24:52:06 2008-Aug-12 00:33:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-12 00:33:18 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-12 00:33:18 LOG5 end_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2008-Aug-12 00:33:18 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-12 00:33:18 LOG5 end_task: Level: (2) ID = <10048> Status = 0 0 0 0 ok 2008-Aug-12 00:33:18 LOG2 take_cal: Calling 'take_cal hcorcal 10 0' 2008-Aug-12 00:33:18 START begin_task: Starting task 'WAPP calibration' 2008-Aug-12 00:33:18 LOG5 begin_task: Level: (2) ID = <10050> Status = 0 0 0 0 ok 2008-Aug-12 00:33:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Aug-12 00:33:18 START begin_task: Starting task 'selecting calibration type' 2008-Aug-12 00:33:18 LOG5 begin_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2008-Aug-12 00:33:18 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Aug-12 00:33:18 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Aug-12 00:33:18 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-12 00:33:18 START begin_task: Starting task 'waiting on setcal' 2008-Aug-12 00:33:18 LOG5 begin_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2008-Aug-12 00:33:18 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Aug-12 00:33:18 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-12 00:33:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-12 00:33:18 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-12 00:33:18 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Aug-12 00:33:18 LOG5 end_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2008-Aug-12 00:33:18 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Aug-12 00:33:18 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Aug-12 00:33:18 LOG5 end_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2008-Aug-12 00:33:18 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Aug-12 00:33:18 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Aug-12 00:33:18 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Aug-12 00:33:18 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-12 00:33:18 LOG5 begin_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2008-Aug-12 00:33:18 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-12 00:33:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-12 00:33:18 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Aug-12 00:33:18 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-12 00:33:18 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-12 00:33:18 LOG5 end_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2008-Aug-12 00:33:18 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Aug-12 00:33:19 LOG4 take_data: Calling 'take_data 10 10 CAL ON -' 2008-Aug-12 00:33:19 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-12 00:33:19 LOG5 begin_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2008-Aug-12 00:33:19 INFO2 take_data: Starting WAPP scan: 822500003 2008-Aug-12 00:33:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-12 00:33:19 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-12 00:33:19 LOG5 begin_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2008-Aug-12 00:33:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-12 00:33:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16400.00 2008-Aug-12 00:33:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11351.610732 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2008-Aug-12 00:33:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1351.610732 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2008-Aug-12 00:33:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1351.610732 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2008-Aug-12 00:33:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1351.610732 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2008-Aug-12 00:33:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1351.610732 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2008-Aug-12 00:33:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-12 00:33:30 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-12 00:33:30 LOG5 end_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2008-Aug-12 00:33:30 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-12 00:33:30 LOG5 end_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2008-Aug-12 00:33:30 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Aug-12 00:33:30 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Aug-12 00:33:30 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Aug-12 00:33:30 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-12 00:33:30 LOG5 begin_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2008-Aug-12 00:33:30 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-12 00:33:30 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-12 00:33:30 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-12 00:33:30 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-12 00:33:30 LOG5 end_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2008-Aug-12 00:33:30 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Aug-12 00:33:30 LOG4 take_data: Calling 'take_data 10 10 CAL OFF -' 2008-Aug-12 00:33:30 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-12 00:33:30 LOG5 begin_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2008-Aug-12 00:33:30 INFO2 take_data: Starting WAPP scan: 822500004 2008-Aug-12 00:33:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-12 00:33:31 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-12 00:33:31 LOG5 begin_task: Level: (4) ID = <10058> Status = 0 0 0 0 ok 2008-Aug-12 00:33:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-12 00:33:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16412.00 2008-Aug-12 00:33:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11351.610732 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2008-Aug-12 00:33:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1351.610732 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2008-Aug-12 00:33:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1351.610732 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2008-Aug-12 00:33:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1351.610732 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2008-Aug-12 00:33:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1351.610732 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2008-Aug-12 00:33:42 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Aug-12 00:33:42 INFO1 WAPP=1+3+4-start_spectra: DONE with spectral line observation 2008-Aug-12 00:33:42 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-12 00:33:42 LOG5 end_task: Level: (4) ID = <10058> Status = 0 0 0 0 ok 2008-Aug-12 00:33:42 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-12 00:33:42 LOG5 end_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2008-Aug-12 00:33:42 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Aug-12 00:33:42 STOP finish_task: Finishing task 'WAPP calibration' 2008-Aug-12 00:33:42 LOG5 finish_task: Level: (2) ID = <10050> Status = 0 0 0 0 ok 2008-Aug-12 00:33:42 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Aug-12 00:33:42 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-12 00:33:42 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Aug-12 00:33:42 LOG5 end_task: Level: (2) ID = <10050> Status = 0 0 0 0 ok 2008-Aug-12 00:33:42 START begin_task: Starting task 'clearing telescope offsets' 2008-Aug-12 00:33:42 LOG5 begin_task: Level: (2) ID = <10059> Status = 0 0 0 0 ok 2008-Aug-12 00:33:42 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Clearing Telescope Offsets} INFO {Removing telescope offsets ...} 2008-Aug-12 00:33:42 INFO3 clear_offsets: Removing telescope offsets 2008-Aug-12 00:33:42 LOG3 vw_send: To DATATAKING: hdrldsrcnm "J223823+245208" 2008-Aug-12 00:33:42 LOG3 vw_send: To DATATAKING: pnt tr 223823.900000 245208.000000 -CJ 2008-Aug-12 00:33:42 STOP finish_task: Finishing task 'clearing telescope offsets' 2008-Aug-12 00:33:42 LOG5 finish_task: Level: (2) ID = <10059> Status = 0 0 0 0 ok 2008-Aug-12 00:33:42 INFO2 finish_task: DONE finished clearing: telescope offsets 2008-Aug-12 00:33:42 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-12 00:33:42 STOP end_task: Finishing task 'clearing telescope offsets' with status 'OK' 2008-Aug-12 00:33:42 LOG5 end_task: Level: (2) ID = <10059> Status = 0 0 0 0 ok 2008-Aug-12 00:33:42 STOP finish_task: Finishing task 'standard on/off' 2008-Aug-12 00:33:42 LOG5 finish_task: Level: (1) ID = <10029> Status = 0 0 0 0 ok 2008-Aug-12 00:33:42 DONE finish_task: DONE finished pattern: standard on/off 2008-Aug-12 00:33:42 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Aug-12 00:33:42 END end_task: Finishing task 'standard on/off' with status 'OK' 2008-Aug-12 00:33:42 LOG5 end_task: Level: (1) ID = <10029> Status = 0 0 0 0 ok 2008-Aug-12 00:33:43 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "J223823+245208" 2008-Aug-12 00:33:43 INFO1 WAPP=2-start_spectra: DONE with spectral line observation 2008-Aug-12 00:33:43 LOG4 got_cormsg: From DATATAKING: pnt tr 223823.900000 245208.000000 -CJ 2008-Aug-12 00:33:43 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Aug-12 00:34:20 INFO1 CIMA-run_command_file: Transferring command file 'command_galfasrc.cmd ' to executive ... 2008-Aug-12 00:34:20 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 5 {LOAD togs_ages.conf} 2008-Aug-12 00:34:20 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 6 {CATALOG togs_ages.cat} 2008-Aug-12 00:34:20 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {GOTO galfasrc} 2008-Aug-12 00:34:20 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {ALFAANGLE 19} 2008-Aug-12 00:34:20 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {WAITTRACK} 2008-Aug-12 00:34:20 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 13 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2008-Aug-12 00:34:20 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-Aug-12 00:34:20 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc.cmd 1 1 6 2008-Aug-12 00:34:20 LOG4 run_command_file: Calling 'run_command_file command_galfasrc.cmd 1 1 6' 2008-Aug-12 00:34:20 BEGIN begin_task: Starting task 'running command file 'command_galfasrc.cmd'' 2008-Aug-12 00:34:20 LOG5 begin_task: Level: (1) ID = <10060> Status = 0 0 0 0 ok 2008-Aug-12 00:34:20 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc.cmd' ...} 2008-Aug-12 00:34:20 NOTE run_command_file: Starting execution of command file 'command_galfasrc.cmd' from line 1 2008-Aug-12 00:34:20 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_ages.conf' 2008-Aug-12 00:34:20 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2008-Aug-12 00:34:20 NOTE CIMA-check_config_file: File 'togs_ages.conf' contains a observing mode set-up which will be ignored! 2008-Aug-12 00:34:20 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Aug-12 00:34:20 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2008-Aug-12 00:34:20 NOTE CIMA-load_config_file: Loading configuration file 'togs_ages.conf' 2008-Aug-12 00:34:21 ALERT CIMA-new_receiver: A change between ALFA and another receiver requires a reconfiguration of the WAPPs! 2008-Aug-12 00:34:21 INFO4 CIMA-antvel: Computed apparent RA = 22:38:50.4 Dec = +24:54:55.1 from RA = 22:38:23.9 Dec = +24:52:08.0 Epoch = 2008.61608 J 2008-Aug-12 00:34:21 INFO4 CIMA-antvel: Parameters to Doppler: Topocentric 16460.0 2008 225 0 2008-Aug-12 00:34:21 INFO3 CIMA-antvel: Computed velocity correction 0.0000000000 2008-Aug-12 00:34:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Aug-12 00:34:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Aug-12 00:34:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Aug-12 00:34:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Aug-12 00:34:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Aug-12 00:34:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2008-Aug-12 00:34:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Aug-12 00:34:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1381.2" 2008-Aug-12 00:34:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1381.2" 2008-Aug-12 00:34:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1381.2" 2008-Aug-12 00:34:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1381.2" 2008-Aug-12 00:34:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1381.2" 2008-Aug-12 00:34:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1381.2" 2008-Aug-12 00:34:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1381.2" 2008-Aug-12 00:34:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1381.2" 2008-Aug-12 00:34:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1381.2" 2008-Aug-12 00:34:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Aug-12 00:34:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Aug-12 00:34:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Aug-12 00:34:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Aug-12 00:34:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Aug-12 00:34:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Aug-12 00:34:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Aug-12 00:34:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Aug-12 00:34:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Aug-12 00:34:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Aug-12 00:34:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Aug-12 00:34:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Aug-12 00:34:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Aug-12 00:34:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2008-Aug-12 00:34:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Aug-12 00:34:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Aug-12 00:34:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Aug-12 00:34:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Aug-12 00:34:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Aug-12 00:34:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Aug-12 00:34:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Aug-12 00:34:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Aug-12 00:34:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Aug-12 00:34:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1564.303846" 2008-Aug-12 00:34:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Aug-12 00:34:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Aug-12 00:34:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Aug-12 00:34:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Aug-12 00:34:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Aug-12 00:34:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Aug-12 00:34:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Aug-12 00:34:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Aug-12 00:34:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Aug-12 00:34:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Aug-12 00:34:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Aug-12 00:34:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Aug-12 00:34:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Aug-12 00:34:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Aug-12 00:34:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Aug-12 00:34:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Aug-12 00:34:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Aug-12 00:34:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Aug-12 00:34:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Aug-12 00:34:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Aug-12 00:34:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Aug-12 00:34:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Aug-12 00:34:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Aug-12 00:34:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Aug-12 00:34:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Aug-12 00:34:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Aug-12 00:34:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Aug-12 00:34:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Aug-12 00:34:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Aug-12 00:34:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Aug-12 00:34:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Aug-12 00:34:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Aug-12 00:34:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Aug-12 00:34:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Aug-12 00:34:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Aug-12 00:34:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Aug-12 00:34:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Aug-12 00:34:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Aug-12 00:34:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Aug-12 00:34:23 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Aug-12 00:34:23 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Aug-12 00:34:23 LOG5 begin_task: Level: (2) ID = <10061> Status = 0 0 0 0 ok 2008-Aug-12 00:34:23 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Aug-12 00:34:23 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Aug-12 00:34:23 INFO1 config_iflo: Selecting receiver ALFA 2008-Aug-12 00:34:23 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2008-Aug-12 00:34:23 LOG1 select_receiver: Calling 'select_receiver alfa no no no' 2008-Aug-12 00:34:23 START begin_task: Starting task 'selecting receiver ALFA' 2008-Aug-12 00:34:23 LOG5 begin_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2008-Aug-12 00:34:23 NOTE select_receiver: Starting to select receiver ALFA 2008-Aug-12 00:34:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Aug-12 00:34:23 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Aug-12 00:34:23 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Aug-12 00:34:23 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Aug-12 00:34:23 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Aug-12 00:34:23 LOG5 finish_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2008-Aug-12 00:34:23 INFO2 finish_task: DONE finished selecting: receiver ALFA 2008-Aug-12 00:34:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-12 00:34:23 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Aug-12 00:34:23 LOG5 end_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2008-Aug-12 00:34:23 START begin_task: Starting task 'waiting for receiver ALFA' 2008-Aug-12 00:34:23 LOG5 begin_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2008-Aug-12 00:34:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 131.4 BITMAP stat_alfa_rot INFO {Waiting on rotating floor} 2008-Aug-12 00:34:23 START begin_task: Starting task 'waiting on waiting for receiver rotation' 2008-Aug-12 00:34:23 LOG5 begin_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2008-Aug-12 00:34:23 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Aug-12 00:34:23 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Aug-12 00:34:30 LOG4 got_cormsg: From DATATAKING: waiting for turret position:26.64 2008-Aug-12 00:36:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-12 00:36:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-12 00:36:35 STOP end_task: Finishing task 'waiting on waiting for receiver rotation' with status 'OK' 2008-Aug-12 00:36:35 LOG5 end_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2008-Aug-12 00:36:35 LOG4 send_obs_status: To obs_status: <0> TASKWAIT 2008-Aug-12 00:36:35 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2008-Aug-12 00:36:35 LOG5 end_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2008-Aug-12 00:36:35 INFO1 config_iflo: Configuring rest of the IF/LO path 2008-Aug-12 00:36:35 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2008-Aug-12 00:36:35 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-12 00:36:35 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Aug-12 00:36:35 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-12 00:36:35 LOG5 begin_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2008-Aug-12 00:36:35 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-12 00:36:35 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-12 00:36:35 LOG5 end_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2008-Aug-12 00:36:35 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-12 00:36:35 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Aug-12 00:36:35 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2008-Aug-12 00:36:35 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2008-Aug-12 00:36:35 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Aug-12 00:36:35 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Aug-12 00:36:35 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2008-Aug-12 00:36:35 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2008-Aug-12 00:36:35 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2008-Aug-12 00:36:35 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1564303846.0} 2008-Aug-12 00:36:35 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2008-Aug-12 00:36:35 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2008-Aug-12 00:36:35 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Aug-12 00:36:35 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Aug-12 00:36:35 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Aug-12 00:36:35 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Aug-12 00:36:35 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Aug-12 00:36:35 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2008-Aug-12 00:36:35 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2008-Aug-12 00:36:35 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2008-Aug-12 00:36:35 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2008-Aug-12 00:36:35 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Aug-12 00:36:35 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2008-Aug-12 00:36:35 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Aug-12 00:36:35 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Aug-12 00:36:35 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-12 00:36:35 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2008-Aug-12 00:36:35 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2008-Aug-12 00:36:35 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Aug-12 00:36:35 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2008-Aug-12 00:36:35 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2008-Aug-12 00:36:35 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Aug-12 00:36:35 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-12 00:36:35 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Aug-12 00:36:35 LOG5 begin_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2008-Aug-12 00:36:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2008-Aug-12 00:36:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1564303846.0} 2008-Aug-12 00:36:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Aug-12 00:36:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Aug-12 00:36:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-12 00:36:35 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-12 00:36:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-12 00:36:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-12 00:36:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-12 00:36:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-12 00:36:37 LOG4 got_cormsg: From DATATAKING: vw% DONE 2008-Aug-12 00:36:37 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Aug-12 00:36:37 LOG5 end_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2008-Aug-12 00:36:37 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Aug-12 00:36:37 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Aug-12 00:36:37 LOG5 finish_task: Level: (2) ID = <10061> Status = 0 0 0 0 ok 2008-Aug-12 00:36:37 DONE finish_task: DONE finished configuration: IF/LO path 2008-Aug-12 00:36:37 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Aug-12 00:36:37 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Aug-12 00:36:37 LOG5 end_task: Level: (2) ID = <10061> Status = 0 0 0 0 ok 2008-Aug-12 00:36:37 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Aug-12 00:36:37 LOG5 begin_task: Level: (2) ID = <10067> Status = 0 0 0 0 ok 2008-Aug-12 00:36:37 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Aug-12 00:36:37 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Aug-12 00:36:37 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2008-Aug-12 00:36:37 START begin_task: Starting task 'selecting calibration port' 2008-Aug-12 00:36:37 LOG5 begin_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2008-Aug-12 00:36:37 LOG3 vw_send: To DATATAKING: calport 3 2008-Aug-12 00:36:37 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Aug-12 00:36:37 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-12 00:36:37 START begin_task: Starting task 'waiting on calport' 2008-Aug-12 00:36:37 LOG5 begin_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2008-Aug-12 00:36:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-12 00:36:37 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Aug-12 00:36:37 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-12 00:36:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-12 00:36:37 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-12 00:36:37 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Aug-12 00:36:37 LOG5 end_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2008-Aug-12 00:36:37 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Aug-12 00:36:37 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Aug-12 00:36:37 LOG5 end_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2008-Aug-12 00:36:37 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Aug-12 00:36:37 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Aug-12 00:36:37 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-12 00:36:37 LOG5 begin_task: Level: (3) ID = <10070> Status = 0 0 0 0 ok 2008-Aug-12 00:36:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-12 00:36:37 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-12 00:36:37 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-12 00:36:37 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-12 00:36:37 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-12 00:36:37 LOG5 end_task: Level: (3) ID = <10070> Status = 0 0 0 0 ok 2008-Aug-12 00:36:38 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Aug-12 00:36:38 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Aug-12 00:36:38 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Aug-12 00:36:38 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Aug-12 00:36:38 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Aug-12 00:36:38 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Aug-12 00:36:38 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Aug-12 00:36:38 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Aug-12 00:36:38 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 RM 2008-Aug-12 00:36:38 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 RM 2008-Aug-12 00:36:38 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 RM 2008-Aug-12 00:36:38 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 RM 2008-Aug-12 00:36:38 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Aug-12 00:36:38 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Aug-12 00:36:38 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-12 00:36:38 LOG5 begin_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2008-Aug-12 00:36:38 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Aug-12 00:36:38 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-12 00:36:38 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Aug-12 00:36:38 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-12 00:36:38 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 RM' 2008-Aug-12 00:36:38 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-12 00:36:38 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-12 00:36:38 LOG5 end_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2008-Aug-12 00:36:38 LOG3 sock_errsend: To WAPPDATA: FLUSH 2008-Aug-12 00:36:38 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Aug-12 00:36:38 LOG5 finish_task: Level: (2) ID = <10067> Status = 0 0 0 0 ok 2008-Aug-12 00:36:38 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Aug-12 00:36:38 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Aug-12 00:36:38 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Aug-12 00:36:38 LOG5 end_task: Level: (2) ID = <10067> Status = 0 0 0 0 ok 2008-Aug-12 00:36:38 COMMAND run_command_line: EXECUTING command 6: 'CATALOG togs_ages.cat' 2008-Aug-12 00:36:38 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/togs_ages.cat' 2008-Aug-12 00:36:38 COMMAND run_command_line: EXECUTING command 7: 'GOTO galfasrc' 2008-Aug-12 00:36:38 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2048/togs_ages.cat galfasrc nooffset nowait' 2008-Aug-12 00:36:38 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2008-Aug-12 00:36:38 LOG5 begin_task: Level: (2) ID = <10072> Status = 0 0 0 0 ok 2008-Aug-12 00:36:38 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2008-Aug-12 00:36:38 LOG3 track_source: Calling 'track_source galfasrc 224000.0 +155900 J 0.0 0.0 main small /share/obs4/usr/a2048/togs_ages.cat 0 Topoce