2008-Aug-10 00:05:10 BEGIN executive: CIMA executive starting ... 2008-Aug-10 00:05:10 NOTE executive: STARTING NEW CIMA SESSION 2008-Aug-10 00:05:10 INFO1 executive: Using CIMA version 3.0.00 'next' from 2008-06-12 15:50 2008-Aug-10 00:05:10 INFO4 executive: This is an ON-LINE session 2008-Aug-10 00:05:10 INFO4 executive: This is a LOCAL session 2008-Aug-10 00:05:10 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2008-Aug-10 00:05:10 INFO1 executive: CIMA session for project 'a2048' in 'line' mode for 'RM' 2008-Aug-10 00:05:10 INFO2 executive: Logging to '/share/obs4/usr/a2048/a2048.cimalog_20080810' 2008-Aug-10 00:05:11 LOG2 log_preferences: Currently applied preferences: 2008-Aug-10 00:05:11 LOG2 log_preferences: prefs(dailylog) = daily 2008-Aug-10 00:05:11 LOG2 log_preferences: prefs(offlinelog) = skip 2008-Aug-10 00:05:11 LOG2 log_preferences: prefs(datawindow) = ignore 2008-Aug-10 00:05:11 LOG2 log_preferences: prefs(limitwarning) = enabled 2008-Aug-10 00:05:11 LOG2 log_preferences: prefs(wappfailure) = abort 2008-Aug-10 00:05:11 LOG2 log_preferences: prefs(helpstyle) = stay-open 2008-Aug-10 00:05:11 LOG2 log_preferences: prefs(logcolours) = full 2008-Aug-10 00:05:11 LOG2 log_preferences: prefs(displaylevel) = INFO3 2008-Aug-10 00:05:11 LOG2 log_preferences: prefs(loglevel) = LOG5 2008-Aug-10 00:05:11 LOG2 log_preferences: prefs(displayformat) = short 2008-Aug-10 00:05:11 LOG2 log_preferences: prefs(logformat) = new 2008-Aug-10 00:05:11 LOG2 log_preferences: prefs(fontsize) = 4 2008-Aug-10 00:05:11 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2008-Aug-10 00:05:11 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2048 2008-Aug-10 00:05:11 ALERT executive: CIMA executive ready 2008-Aug-10 00:05:12 NOTE frontend: CIMA frontend ready 2008-Aug-10 00:05:14 LOG4 got_cormsg: From DATATAKING: Can't communicate with program corProg 2008-Aug-10 00:05:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:05:14 LOG4 got_cormsg: From DATATAKING: setup 2008-Aug-10 00:05:15 INFO1 CIMA-find_last_tsys: Last Tsys-values for 'L-Band Wide' is from 2008-Aug-09 14:16:54 for 'hcorcal': 31.8 K & 31.9 K 2008-Aug-10 00:05:15 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2008-Aug-10 00:05:15 LOG4 exec_msg: From OBSERVER: select_receiver lbw no no yes 2008-Aug-10 00:05:15 LOG1 select_receiver: Calling 'select_receiver lbw no no yes' 2008-Aug-10 00:05:15 BEGIN begin_task: Starting task 'selecting receiver L-Band Wide' 2008-Aug-10 00:05:15 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Aug-10 00:05:15 NOTE select_receiver: Starting to select receiver L-Band Wide 2008-Aug-10 00:05:15 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver L-Band Wide ...} 2008-Aug-10 00:05:15 LOG3 vw_send: To DATATAKING: setupall 5 1400.0 2008-Aug-10 00:05:15 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Aug-10 00:05:15 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Aug-10 00:05:15 STOP finish_task: Finishing task 'selecting receiver L-Band Wide' 2008-Aug-10 00:05:15 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Aug-10 00:05:15 DONE finish_task: DONE finished selecting: receiver L-Band Wide 2008-Aug-10 00:05:15 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Aug-10 00:05:15 END end_task: Finishing task 'selecting receiver L-Band Wide' with status 'OK' 2008-Aug-10 00:05:15 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Aug-10 00:05:19 NOTE CIMA-load_config_file: Loading and applying configuration file 'ages_lbw.conf' 2008-Aug-10 00:05:20 INFO1 CIMA-find_last_tsys: Last Tsys-values for 'L-Band Wide' is from 2008-Aug-09 14:16:54 for 'hcorcal': 31.8 K & 31.9 K 2008-Aug-10 00:05:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Aug-10 00:05:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Aug-10 00:05:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "lbw" 2008-Aug-10 00:05:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Aug-10 00:05:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Aug-10 00:05:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2008-Aug-10 00:05:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "10GHz to 1500" 2008-Aug-10 00:05:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786" 2008-Aug-10 00:05:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786" 2008-Aug-10 00:05:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786" 2008-Aug-10 00:05:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786" 2008-Aug-10 00:05:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786" 2008-Aug-10 00:05:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786" 2008-Aug-10 00:05:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786" 2008-Aug-10 00:05:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786" 2008-Aug-10 00:05:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786" 2008-Aug-10 00:05:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "275" 2008-Aug-10 00:05:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "275" 2008-Aug-10 00:05:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "275" 2008-Aug-10 00:05:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "275" 2008-Aug-10 00:05:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "1775.000000" 2008-Aug-10 00:05:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "1775.000000" 2008-Aug-10 00:05:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "1775.000000" 2008-Aug-10 00:05:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "1775.000000" 2008-Aug-10 00:05:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "1775.000000" 2008-Aug-10 00:05:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "1775.000000" 2008-Aug-10 00:05:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "1775.000000" 2008-Aug-10 00:05:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "1775.000000" 2008-Aug-10 00:05:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Aug-10 00:05:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2008-Aug-10 00:05:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Aug-10 00:05:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "lbwpol lin" 2008-Aug-10 00:05:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "lbfb 7" 2008-Aug-10 00:05:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Aug-10 00:05:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "F" 2008-Aug-10 00:05:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "5" 2008-Aug-10 00:05:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Aug-10 00:05:22 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0x300002 2008-Aug-10 00:05:22 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0x300002' 2008-Aug-10 00:05:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "7 5" 2008-Aug-10 00:05:22 LOG4 got_cormsg: From DATATAKING: vw% io 2008-Aug-10 00:05:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "4" 2008-Aug-10 00:05:22 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2008-Aug-10 00:05:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "11420.405752" 2008-Aug-10 00:05:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Aug-10 00:05:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Aug-10 00:05:22 LOG4 got_cormsg: From DATATAKING: 2008-Aug-10 00:05:22 LOG4 got_cormsg: From DATATAKING: vw% tape stat 2008-Aug-10 00:05:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "0" 2008-Aug-10 00:05:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "0" 2008-Aug-10 00:05:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "F" 2008-Aug-10 00:05:22 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2008-Aug-10 00:05:22 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2008-Aug-10 00:05:22 LOG4 got_cormsg: From DATATAKING: vw% connectall 2008-Aug-10 00:05:22 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2008-Aug-10 00:05:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "0" 2008-Aug-10 00:05:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Aug-10 00:05:22 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2008-Aug-10 00:05:22 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2008-Aug-10 00:05:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Aug-10 00:05:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Aug-10 00:05:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "1500" 2008-Aug-10 00:05:22 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2008-Aug-10 00:05:22 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2008-Aug-10 00:05:22 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2008-Aug-10 00:05:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "1500 1500 1500 1500 1500 1500 1500 1500" 2008-Aug-10 00:05:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "750" 2008-Aug-10 00:05:22 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2008-Aug-10 00:05:22 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2008-Aug-10 00:05:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Aug-10 00:05:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Aug-10 00:05:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "F" 2008-Aug-10 00:05:22 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2048 2008-Aug-10 00:05:22 LOG4 got_cormsg: From DATATAKING: setupall 5 1400.0 2008-Aug-10 00:05:22 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Aug-10 00:05:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Aug-10 00:05:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "5" 2008-Aug-10 00:05:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:05:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:05:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Aug-10 00:05:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Aug-10 00:05:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Aug-10 00:05:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "50" 2008-Aug-10 00:05:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "50" 2008-Aug-10 00:05:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "25" 2008-Aug-10 00:05:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "25" 2008-Aug-10 00:05:22 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2008-Aug-10 00:05:22 LOG4 exec_msg: From OBSERVER: config_iflo 2008-Aug-10 00:05:22 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Aug-10 00:05:22 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Aug-10 00:05:22 INFO1 config_iflo: Starting to configure IF/LO path for L-Band Wide 2008-Aug-10 00:05:22 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Aug-10 00:05:22 INFO1 config_iflo: Selecting receiver L-Band Wide 2008-Aug-10 00:05:22 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver L-Band Wide} 2008-Aug-10 00:05:22 LOG1 select_receiver: Calling 'select_receiver lbw no no yes' 2008-Aug-10 00:05:22 START begin_task: Starting task 'selecting receiver L-Band Wide' 2008-Aug-10 00:05:22 LOG5 begin_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2008-Aug-10 00:05:22 NOTE select_receiver: Starting to select receiver L-Band Wide 2008-Aug-10 00:05:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver L-Band Wide ...} 2008-Aug-10 00:05:22 LOG3 vw_send: To DATATAKING: setupall 5 1400.0 2008-Aug-10 00:05:22 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Aug-10 00:05:22 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Aug-10 00:05:22 STOP finish_task: Finishing task 'selecting receiver L-Band Wide' 2008-Aug-10 00:05:22 LOG5 finish_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2008-Aug-10 00:05:22 INFO2 finish_task: DONE finished selecting: receiver L-Band Wide 2008-Aug-10 00:05:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 00:05:22 STOP end_task: Finishing task 'selecting receiver L-Band Wide' with status 'OK' 2008-Aug-10 00:05:22 LOG5 end_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2008-Aug-10 00:05:22 START begin_task: Starting task 'waiting for receiver L-Band Wide' 2008-Aug-10 00:05:22 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Aug-10 00:05:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 131.4 BITMAP stat_alfa_rot INFO {Waiting on rotating floor} 2008-Aug-10 00:05:22 START begin_task: Starting task 'waiting on waiting for receiver rotation' 2008-Aug-10 00:05:22 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Aug-10 00:05:22 LOG4 got_cormsg: From DATATAKING: setupall 5 1400.0 2008-Aug-10 00:05:22 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Aug-10 00:05:36 LOG4 got_cormsg: From DATATAKING: waiting for turret position:285.79 2008-Aug-10 00:06:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.43) to the zenith angle limit 19.69 degrees! 2008-Aug-10 00:06:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 359.0071 19.4342 RA/Dec = 20:56:04 -01:06:44 2008-Aug-10 00:07:32 LOG4 got_cormsg: From DATATAKING: settinng up if2 2008-Aug-10 00:07:32 LOG4 got_cormsg: From DATATAKING: setting up if1lo 2008-Aug-10 00:07:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:07:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:07:34 STOP end_task: Finishing task 'waiting on waiting for receiver rotation' with status 'OK' 2008-Aug-10 00:07:34 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Aug-10 00:07:34 LOG4 send_obs_status: To obs_status: <0> TASKWAIT 2008-Aug-10 00:07:34 STOP end_task: Finishing task 'waiting for receiver L-Band Wide' with status 'OK' 2008-Aug-10 00:07:34 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Aug-10 00:07:34 INFO1 config_iflo: Configuring rest of the IF/LO path 2008-Aug-10 00:07:34 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2008-Aug-10 00:07:35 LOG3 vw_send: To DATATAKING: lbwpol lin 2008-Aug-10 00:07:35 LOG3 vw_send: To DATATAKING: lbfb 7 2008-Aug-10 00:07:35 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2008-Aug-10 00:07:35 LOG3 vw_send: To DATATAKING: if1 {if1_shcl F} 2008-Aug-10 00:07:35 LOG3 vw_send: To DATATAKING: if1 {if1_rfnum 5} 2008-Aug-10 00:07:35 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2008-Aug-10 00:07:35 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 7 5} 2008-Aug-10 00:07:35 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 4} 2008-Aug-10 00:07:35 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 11420405752.0} 2008-Aug-10 00:07:35 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2008-Aug-10 00:07:35 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2008-Aug-10 00:07:35 LOG3 vw_send: To DATATAKING: if1 {if1_ac2sw 0} 2008-Aug-10 00:07:35 LOG3 vw_send: To DATATAKING: if1 {if1_phbsig 0} 2008-Aug-10 00:07:35 LOG3 vw_send: To DATATAKING: if1 {if1_hybrid F} 2008-Aug-10 00:07:35 LOG3 vw_send: To DATATAKING: if1 {if1_phblo 0} 2008-Aug-10 00:07:35 LOG3 vw_send: To DATATAKING: if1 {if1_750nb F} 2008-Aug-10 00:07:35 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2008-Aug-10 00:07:35 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 5} 2008-Aug-10 00:07:35 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2008-Aug-10 00:07:35 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2008-Aug-10 00:07:35 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Aug-10 00:07:35 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq 1500} 2008-Aug-10 00:07:35 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 1500 1500 1500 1500 1500 1500 1500 1500} 2008-Aug-10 00:07:35 LOG3 vw_send: To DATATAKING: if2 {if2_vlbainp 750} 2008-Aug-10 00:07:35 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0} 2008-Aug-10 00:07:35 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Aug-10 00:07:35 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2008-Aug-10 00:07:35 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Aug-10 00:07:35 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2008-Aug-10 00:07:35 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2008-Aug-10 00:07:35 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Aug-10 00:07:35 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 00:07:35 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Aug-10 00:07:35 LOG5 begin_task: Level: (2) ID = <10006> Status = 0 0 0 0 ok 2008-Aug-10 00:07:35 LOG4 got_cormsg: From DATATAKING: lbwpol lin 2008-Aug-10 00:07:35 LOG4 got_cormsg: From DATATAKING: lbfb 7 2008-Aug-10 00:07:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2008-Aug-10 00:07:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_shcl F} 2008-Aug-10 00:07:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfnum 5} 2008-Aug-10 00:07:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2008-Aug-10 00:07:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 7 5} 2008-Aug-10 00:07:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 4} 2008-Aug-10 00:07:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 11420405752.0} 2008-Aug-10 00:07:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2008-Aug-10 00:07:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2008-Aug-10 00:07:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_ac2sw 0} 2008-Aug-10 00:07:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_phbsig 0} 2008-Aug-10 00:07:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_hybrid F} 2008-Aug-10 00:07:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_phblo 0} 2008-Aug-10 00:07:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_750nb F} 2008-Aug-10 00:07:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2008-Aug-10 00:07:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 5} 2008-Aug-10 00:07:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2008-Aug-10 00:07:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2008-Aug-10 00:07:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Aug-10 00:07:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq 1500} 2008-Aug-10 00:07:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 1500 1500 1500 1500 1500 1500 1500 1500} 2008-Aug-10 00:07:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_vlbainp 750} 2008-Aug-10 00:07:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0} 2008-Aug-10 00:07:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Aug-10 00:07:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2008-Aug-10 00:07:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2008-Aug-10 00:07:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2008-Aug-10 00:07:35 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 00:07:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.43) to the zenith angle limit 19.69 degrees! 2008-Aug-10 00:07:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 359.0071 19.4343 RA/Dec = 20:57:35 -01:06:44 2008-Aug-10 00:07:46 LOG4 got_cormsg: From DATATAKING: settinng up if2 2008-Aug-10 00:07:46 LOG4 got_cormsg: From DATATAKING: setting up if1lo 2008-Aug-10 00:07:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:07:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:07:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:07:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:07:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:07:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:07:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:07:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:07:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:07:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:07:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:07:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:07:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:07:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:07:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:07:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:07:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:07:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:07:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:07:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:07:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:07:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:07:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:07:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:07:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:08:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:08:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:08:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:08:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:08:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:08:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:08:00 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-10 00:08:00 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Aug-10 00:08:00 LOG5 end_task: Level: (2) ID = <10006> Status = 0 0 0 0 ok 2008-Aug-10 00:08:01 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Aug-10 00:08:01 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Aug-10 00:08:01 LOG5 finish_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Aug-10 00:08:01 DONE finish_task: DONE finished configuration: IF/LO path 2008-Aug-10 00:08:01 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Aug-10 00:08:01 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Aug-10 00:08:01 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Aug-10 00:08:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:08:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Aug-10 00:08:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Aug-10 00:08:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Aug-10 00:08:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Aug-10 00:08:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "1 chan, 9-level, pol a" 2008-Aug-10 00:08:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "1 chan, 9-level, pol b" 2008-Aug-10 00:08:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "1 chan, 9-level, pol a" 2008-Aug-10 00:08:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "1 chan, 9-level, pol b" 2008-Aug-10 00:08:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "50" 2008-Aug-10 00:08:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "50" 2008-Aug-10 00:08:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "25" 2008-Aug-10 00:08:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "25" 2008-Aug-10 00:08:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Aug-10 00:08:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "0" 2008-Aug-10 00:08:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "0" 2008-Aug-10 00:08:01 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2008-Aug-10 00:08:01 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2008-Aug-10 00:08:01 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Aug-10 00:08:01 LOG5 begin_task: Level: (1) ID = <10007> Status = 0 0 0 0 ok 2008-Aug-10 00:08:01 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Aug-10 00:08:01 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Aug-10 00:08:01 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2008-Aug-10 00:08:01 START begin_task: Starting task 'selecting calibration port' 2008-Aug-10 00:08:01 LOG5 begin_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2008-Aug-10 00:08:01 LOG3 vw_send: To DATATAKING: calport 3 2008-Aug-10 00:08:01 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Aug-10 00:08:01 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 00:08:01 START begin_task: Starting task 'waiting on calport' 2008-Aug-10 00:08:01 LOG5 begin_task: Level: (3) ID = <10009> Status = 0 0 0 0 ok 2008-Aug-10 00:08:01 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Aug-10 00:08:01 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 00:08:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:08:02 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-10 00:08:02 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Aug-10 00:08:02 LOG5 end_task: Level: (3) ID = <10009> Status = 0 0 0 0 ok 2008-Aug-10 00:08:02 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Aug-10 00:08:02 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Aug-10 00:08:02 LOG5 end_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2008-Aug-10 00:08:02 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Aug-10 00:08:02 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Aug-10 00:08:02 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-10 00:08:02 LOG5 begin_task: Level: (2) ID = <10010> Status = 0 0 0 0 ok 2008-Aug-10 00:08:02 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-10 00:08:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:08:02 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-10 00:08:02 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-10 00:08:02 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-10 00:08:02 LOG5 end_task: Level: (2) ID = <10010> Status = 0 0 0 0 ok 2008-Aug-10 00:08:02 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Aug-10 00:08:02 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Aug-10 00:08:02 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Aug-10 00:08:02 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Aug-10 00:08:02 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Aug-10 00:08:02 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Aug-10 00:08:02 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Aug-10 00:08:02 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Aug-10 00:08:02 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 RM 2008-Aug-10 00:08:02 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 RM 2008-Aug-10 00:08:02 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 RM 2008-Aug-10 00:08:02 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 RM 2008-Aug-10 00:08:02 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Aug-10 00:08:02 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Aug-10 00:08:02 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-10 00:08:02 LOG5 begin_task: Level: (2) ID = <10011> Status = 0 0 0 0 ok 2008-Aug-10 00:08:02 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-10 00:08:02 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-10 00:08:02 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-10 00:08:02 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-10 00:08:02 LOG5 end_task: Level: (2) ID = <10011> Status = 0 0 0 0 ok 2008-Aug-10 00:08:02 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 RM 2008-Aug-10 00:08:02 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 RM 2008-Aug-10 00:08:02 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 RM 2008-Aug-10 00:08:02 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 RM 2008-Aug-10 00:08:02 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Aug-10 00:08:02 LOG5 finish_task: Level: (1) ID = <10007> Status = 0 0 0 0 ok 2008-Aug-10 00:08:02 DONE finish_task: DONE finished configuring: the WAPPs in single board mode 2008-Aug-10 00:08:02 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Aug-10 00:08:02 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Aug-10 00:08:02 LOG5 end_task: Level: (1) ID = <10007> Status = 0 0 0 0 ok 2008-Aug-10 00:08:02 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 RM' 2008-Aug-10 00:08:02 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Aug-10 00:08:02 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Aug-10 00:08:02 NOTE CIMA-load_config_file: Configuration file 'ages_lbw.conf' applied. 2008-Aug-10 00:08:03 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 RM' 2008-Aug-10 00:08:03 NOTE WAPPDATA-new_file: New FITS file: wapp.20080810.a2048.0000.fits 2008-Aug-10 00:08:03 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20080810.a2048.0000.fits} 2008-Aug-10 00:08:23 COMMAND CIMA-send_to_exec: Sending command to point to a source 2008-Aug-10 00:08:23 LOG4 exec_msg: From OBSERVER: track_new_source J223502+242142 223502.3 242142 J 0 0 main small /share/obs4/usr/a2048/n7332fu.cat 12242 Topocentric velocity(optical) 0 0 0.0 0.0 0 2008-Aug-10 00:08:23 LOG1 track_new_source: Calling 'track_new_source J223502+242142 223502.3 242142 J 0 0 main small /share/obs4/usr/a2048/n7332fu.cat 12242 Topocentric velocity(optical) 0 0 0.0 0.0 0' 2008-Aug-10 00:08:23 BEGIN begin_task: Starting task 'selecting new source' 2008-Aug-10 00:08:23 LOG5 begin_task: Level: (1) ID = <10012> Status = 0 0 0 0 ok 2008-Aug-10 00:08:23 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {J223502+242142} INFO {Selecting source 'J223502+242142' ...} 2008-Aug-10 00:08:23 LOG3 track_source: Calling 'track_source J223502+242142 223502.3 242142 J 0 0 main small /share/obs4/usr/a2048/n7332fu.cat 12242 Topocentric velocity(optical)' 2008-Aug-10 00:08:23 START begin_task: Starting task 'sending tracking commands' 2008-Aug-10 00:08:23 LOG5 begin_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2008-Aug-10 00:08:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {J223502+242142} INFO {Slewing to source 'J223502+242142' ...} 2008-Aug-10 00:08:23 INFO1 track_source: Starting to track J223502+242142 2008-Aug-10 00:08:23 LOG3 vw_send: To DATATAKING: hdrldsrcnm "J223502+242142" 2008-Aug-10 00:08:24 LOG3 vw_send: To DATATAKING: set ra 223502.3 2008-Aug-10 00:08:24 LOG3 vw_send: To DATATAKING: set dec 242142 2008-Aug-10 00:08:24 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Aug-10 00:08:24 LOG3 vw_send: To DATATAKING: pnt tr 223502.3 242142 -CJ 2008-Aug-10 00:08:24 LOG3 vw_send: To DATATAKING: dopsetvel 12242 topo 2008-Aug-10 00:08:24 STOP finish_task: Finishing task 'sending tracking commands' 2008-Aug-10 00:08:24 LOG5 finish_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2008-Aug-10 00:08:24 INFO2 finish_task: DONE finished sending: tracking commands 2008-Aug-10 00:08:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 00:08:24 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Aug-10 00:08:24 LOG5 end_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2008-Aug-10 00:08:24 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0.0 0.0 0' 2008-Aug-10 00:08:24 START begin_task: Starting task 'applying pointing corrections' 2008-Aug-10 00:08:24 LOG5 begin_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2008-Aug-10 00:08:24 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2008-Aug-10 00:08:24 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2008-Aug-10 00:08:24 STOP finish_task: Finishing task 'applying pointing corrections' 2008-Aug-10 00:08:24 LOG5 finish_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2008-Aug-10 00:08:24 INFO2 finish_task: DONE finished applying: pointing corrections 2008-Aug-10 00:08:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 00:08:24 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2008-Aug-10 00:08:24 LOG5 end_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2008-Aug-10 00:08:24 STOP finish_task: Finishing task 'selecting new source' 2008-Aug-10 00:08:24 LOG5 finish_task: Level: (1) ID = <10012> Status = 0 0 0 0 ok 2008-Aug-10 00:08:24 DONE finish_task: DONE finished selecting: new source 2008-Aug-10 00:08:24 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Aug-10 00:08:24 END end_task: Finishing task 'selecting new source' with status 'OK' 2008-Aug-10 00:08:24 LOG5 end_task: Level: (1) ID = <10012> Status = 0 0 0 0 ok 2008-Aug-10 00:08:24 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "J223502+242142" 2008-Aug-10 00:08:24 LOG4 got_cormsg: From DATATAKING: set ra 223502.3 2008-Aug-10 00:08:24 LOG4 got_cormsg: From DATATAKING: set dec 242142 2008-Aug-10 00:08:24 LOG4 got_cormsg: From DATATAKING: vw% 223502.3 2008-Aug-10 00:08:24 LOG4 got_cormsg: From DATATAKING: vw% 242142 2008-Aug-10 00:08:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:08:24 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Aug-10 00:08:24 LOG4 got_cormsg: From DATATAKING: pnt tr 223502.3 242142 -CJ 2008-Aug-10 00:08:24 LOG4 got_cormsg: From DATATAKING: dopsetvel 12242 topo 2008-Aug-10 00:08:24 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Aug-10 00:08:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:08:24 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2008-Aug-10 00:08:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:09:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.69) to the zenith angle limit 19.69 degrees! 2008-Aug-10 00:09:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 341.4430 19.6900 RA/Dec = 22:35:02 +24:21:42 2008-Aug-10 00:09:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.69) to the zenith angle limit 19.69 degrees! 2008-Aug-10 00:09:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 328.9427 19.6901 RA/Dec = 22:35:02 +24:21:42 2008-Aug-10 00:10:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.69) to the zenith angle limit 19.69 degrees! 2008-Aug-10 00:10:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 316.8492 19.6900 RA/Dec = 22:35:02 +24:21:42 2008-Aug-10 00:10:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.69) to the zenith angle limit 19.69 degrees! 2008-Aug-10 00:10:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 303.9406 19.6901 RA/Dec = 22:35:02 +24:21:42 2008-Aug-10 00:11:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.69) to the zenith angle limit 19.69 degrees! 2008-Aug-10 00:11:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 291.4389 19.6900 RA/Dec = 22:35:02 +24:21:42 2008-Aug-10 00:11:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.69) to the zenith angle limit 19.69 degrees! 2008-Aug-10 00:11:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 278.9389 19.6900 RA/Dec = 22:35:02 +24:21:42 2008-Aug-10 00:12:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.69) to the zenith angle limit 19.69 degrees! 2008-Aug-10 00:12:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 266.4355 19.6900 RA/Dec = 22:35:02 +24:21:42 2008-Aug-10 00:12:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.69) to the zenith angle limit 19.69 degrees! 2008-Aug-10 00:12:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 253.9342 19.6900 RA/Dec = 22:35:02 +24:21:42 2008-Aug-10 00:13:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.69) to the zenith angle limit 19.69 degrees! 2008-Aug-10 00:13:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 249.9041 19.6900 RA/Dec = 22:35:02 +24:21:42 2008-Aug-10 00:13:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.69) to the zenith angle limit 19.69 degrees! 2008-Aug-10 00:13:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 249.8462 19.6900 RA/Dec = 22:35:02 +24:21:42 2008-Aug-10 00:14:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.69) to the zenith angle limit 19.69 degrees! 2008-Aug-10 00:14:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 249.7875 19.6900 RA/Dec = 22:35:02 +24:21:42 2008-Aug-10 00:14:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.69) to the zenith angle limit 19.69 degrees! 2008-Aug-10 00:14:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 249.7281 19.6900 RA/Dec = 22:35:02 +24:21:42 2008-Aug-10 00:15:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.69) to the zenith angle limit 19.69 degrees! 2008-Aug-10 00:15:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 249.6678 19.6900 RA/Dec = 22:35:02 +24:21:42 2008-Aug-10 00:15:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.69) to the zenith angle limit 19.69 degrees! 2008-Aug-10 00:15:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 249.6068 19.6900 RA/Dec = 22:35:02 +24:21:42 2008-Aug-10 00:16:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.69) to the zenith angle limit 19.69 degrees! 2008-Aug-10 00:16:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 249.5453 19.6900 RA/Dec = 22:35:02 +24:21:42 2008-Aug-10 00:16:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.69) to the zenith angle limit 19.69 degrees! 2008-Aug-10 00:16:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 249.4824 19.6899 RA/Dec = 22:35:02 +24:21:42 2008-Aug-10 00:17:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.69) to the zenith angle limit 19.69 degrees! 2008-Aug-10 00:17:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 249.4184 19.6900 RA/Dec = 22:35:02 +24:21:42 2008-Aug-10 00:17:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.69) to the zenith angle limit 19.69 degrees! 2008-Aug-10 00:17:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 249.3534 19.6900 RA/Dec = 22:35:02 +24:21:42 2008-Aug-10 00:17:56 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 00:17:56.294 (seconds: 1076.294)!} 2008-Aug-10 00:17:56 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 00:17:56.294 (seconds: 1076.294)! 2008-Aug-10 00:18:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.69) to the zenith angle limit 19.69 degrees! 2008-Aug-10 00:18:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 249.2881 19.6900 RA/Dec = 22:35:02 +24:21:42 2008-Aug-10 00:18:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.69) to the zenith angle limit 19.69 degrees! 2008-Aug-10 00:18:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 249.2214 19.6900 RA/Dec = 22:35:02 +24:21:42 2008-Aug-10 00:19:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.69) to the zenith angle limit 19.69 degrees! 2008-Aug-10 00:19:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 249.1535 19.6900 RA/Dec = 22:35:02 +24:21:42 2008-Aug-10 00:19:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.69) to the zenith angle limit 19.69 degrees! 2008-Aug-10 00:19:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 249.0848 19.6900 RA/Dec = 22:35:02 +24:21:42 2008-Aug-10 00:20:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.69) to the zenith angle limit 19.69 degrees! 2008-Aug-10 00:20:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 249.0156 19.6900 RA/Dec = 22:35:02 +24:21:42 2008-Aug-10 00:20:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.69) to the zenith angle limit 19.69 degrees! 2008-Aug-10 00:20:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 248.9453 19.6900 RA/Dec = 22:35:02 +24:21:42 2008-Aug-10 00:21:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.69) to the zenith angle limit 19.69 degrees! 2008-Aug-10 00:21:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 248.8737 19.6900 RA/Dec = 22:35:02 +24:21:42 2008-Aug-10 00:21:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.69) to the zenith angle limit 19.69 degrees! 2008-Aug-10 00:21:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 248.8010 19.6900 RA/Dec = 22:35:02 +24:21:42 2008-Aug-10 00:22:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.69) to the zenith angle limit 19.69 degrees! 2008-Aug-10 00:22:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 248.7278 19.6900 RA/Dec = 22:35:02 +24:21:42 2008-Aug-10 00:22:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.69) to the zenith angle limit 19.69 degrees! 2008-Aug-10 00:22:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 248.6524 19.6900 RA/Dec = 22:35:02 +24:21:42 2008-Aug-10 00:23:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.69) to the zenith angle limit 19.69 degrees! 2008-Aug-10 00:23:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 248.5771 19.6900 RA/Dec = 22:35:02 +24:21:42 2008-Aug-10 00:23:29 COMMAND CIMA-send_to_exec: Sending command to run standard on/off 2008-Aug-10 00:23:29 LOG4 exec_msg: From OBSERVER: onoff 1 300 60 hcorcal 10 each first 0 2008-Aug-10 00:23:29 LOG1 onoff_wapp: Calling 'onoff_wapp 1 300 60 hcorcal 10 each first 0' 2008-Aug-10 00:23:29 BEGIN begin_task: Starting task 'standard on/off' 2008-Aug-10 00:23:29 LOG5 begin_task: Level: (1) ID = <10015> Status = 0 0 0 0 ok 2008-Aug-10 00:23:29 INFO4 begin_task: MAKING 'standard on/off' using 'lbw' + 'WAPP' on 'J223502+242142' 2008-Aug-10 00:23:29 INFO1 onoff_wapp: Starting pattern: Standard on/off 2008-Aug-10 00:23:29 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Standard on/off} TOTALLOOPS 1 INFO {Starting standard on/off observation ...} 2008-Aug-10 00:23:29 START begin_task: Starting task 'waiting on telescope' 2008-Aug-10 00:23:29 LOG5 begin_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2008-Aug-10 00:23:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Aug-10 00:23:29 LOG3 waittrk: Start waittrk 5 2008-Aug-10 00:23:29 START begin_task: Starting task 'waiting on telescope movement' 2008-Aug-10 00:23:29 LOG5 begin_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2008-Aug-10 00:23:35 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Aug-10 00:23:35 LOG5 end_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2008-Aug-10 00:23:35 START begin_task: Starting task 'waiting on telescope on source' 2008-Aug-10 00:23:35 LOG5 begin_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2008-Aug-10 00:23:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.69) to the zenith angle limit 19.69 degrees! 2008-Aug-10 00:23:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 248.5001 19.6900 RA/Dec = 22:35:02 +24:21:42 2008-Aug-10 00:24:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.69) to the zenith angle limit 19.69 degrees! 2008-Aug-10 00:24:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 248.4223 19.6900 RA/Dec = 22:35:02 +24:21:42 2008-Aug-10 00:24:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.69) to the zenith angle limit 19.69 degrees! 2008-Aug-10 00:24:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 248.3433 19.6900 RA/Dec = 22:35:02 +24:21:42 2008-Aug-10 00:25:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.69) to the zenith angle limit 19.69 degrees! 2008-Aug-10 00:25:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 248.2630 19.6900 RA/Dec = 22:35:02 +24:21:42 2008-Aug-10 00:25:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.69) to the zenith angle limit 19.69 degrees! 2008-Aug-10 00:25:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 248.1818 19.6900 RA/Dec = 22:35:02 +24:21:42 2008-Aug-10 00:25:54 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Aug-10 00:25:54 LOG5 end_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2008-Aug-10 00:25:54 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Aug-10 00:25:54 INFO2 waittrk: Now tracking J223502+242142 2008-Aug-10 00:25:54 LOG4 waittrk: Current telescope position: Az = 248.15 ZA = 19.68 2008-Aug-10 00:25:54 STOP finish_task: Finishing task 'waiting on telescope' 2008-Aug-10 00:25:54 LOG5 finish_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2008-Aug-10 00:25:54 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Aug-10 00:25:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 00:25:54 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Aug-10 00:25:54 LOG5 end_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2008-Aug-10 00:25:54 START begin_task: Starting task 'selecting calibration type' 2008-Aug-10 00:25:54 LOG5 begin_task: Level: (2) ID = <10019> Status = 0 0 0 0 ok 2008-Aug-10 00:25:54 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Aug-10 00:25:54 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Aug-10 00:25:54 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 00:25:54 START begin_task: Starting task 'waiting on setcal' 2008-Aug-10 00:25:54 LOG5 begin_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2008-Aug-10 00:25:54 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Aug-10 00:25:54 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 00:25:54 LOG4 got_cormsg: From DATATAKING: vw% DONE 2008-Aug-10 00:25:54 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Aug-10 00:25:54 LOG5 end_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2008-Aug-10 00:25:54 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Aug-10 00:25:54 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Aug-10 00:25:54 LOG5 end_task: Level: (2) ID = <10019> Status = 0 0 0 0 ok 2008-Aug-10 00:25:54 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 RM 2008-Aug-10 00:25:54 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 RM 2008-Aug-10 00:25:54 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 RM 2008-Aug-10 00:25:54 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 RM 2008-Aug-10 00:25:55 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20080810.a2048.0000.fits' is empty! 2008-Aug-10 00:25:55 INFO2 onoff_wapp: Starting standard on/off loop 1 of 1 2008-Aug-10 00:25:55 LOG4 send_obs_status: To obs_status: <1> LOOP 1 TOTALPARTS 2 PART 1 INFO {Making ON observation followed by OFF} 2008-Aug-10 00:25:55 START begin_task: Starting task 'clearing telescope offsets' 2008-Aug-10 00:25:55 LOG5 begin_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2008-Aug-10 00:25:55 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Clearing Telescope Offsets} INFO {Removing telescope offsets ...} 2008-Aug-10 00:25:55 INFO3 clear_offsets: Removing telescope offsets 2008-Aug-10 00:25:55 LOG3 vw_send: To DATATAKING: hdrldsrcnm "J223502+242142" 2008-Aug-10 00:25:55 LOG3 vw_send: To DATATAKING: pnt tr 223502.300000 242142.000000 -CJ 2008-Aug-10 00:25:55 STOP finish_task: Finishing task 'clearing telescope offsets' 2008-Aug-10 00:25:55 LOG5 finish_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2008-Aug-10 00:25:55 INFO2 finish_task: DONE finished clearing: telescope offsets 2008-Aug-10 00:25:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 00:25:55 STOP end_task: Finishing task 'clearing telescope offsets' with status 'OK' 2008-Aug-10 00:25:55 LOG5 end_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2008-Aug-10 00:25:55 START begin_task: Starting task 'waiting on telescope' 2008-Aug-10 00:25:55 LOG5 begin_task: Level: (2) ID = <10022> Status = 0 0 0 0 ok 2008-Aug-10 00:25:55 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Aug-10 00:25:55 LOG3 waittrk: Start waittrk 5 2008-Aug-10 00:25:55 START begin_task: Starting task 'waiting on telescope movement' 2008-Aug-10 00:25:55 LOG5 begin_task: Level: (3) ID = <10023> Status = 0 0 0 0 ok 2008-Aug-10 00:25:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:25:55 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "J223502+242142" 2008-Aug-10 00:25:55 LOG4 got_cormsg: From DATATAKING: pnt tr 223502.300000 242142.000000 -CJ 2008-Aug-10 00:25:55 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Aug-10 00:25:55 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 RM' 2008-Aug-10 00:26:00 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Aug-10 00:26:00 LOG5 end_task: Level: (3) ID = <10023> Status = 0 0 0 0 ok 2008-Aug-10 00:26:00 START begin_task: Starting task 'waiting on telescope on source' 2008-Aug-10 00:26:00 LOG5 begin_task: Level: (3) ID = <10024> Status = 0 0 0 0 ok 2008-Aug-10 00:26:02 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Aug-10 00:26:02 LOG5 end_task: Level: (3) ID = <10024> Status = 0 0 0 0 ok 2008-Aug-10 00:26:02 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Aug-10 00:26:02 INFO2 waittrk: Now tracking J223502+242142 2008-Aug-10 00:26:02 LOG4 waittrk: Current telescope position: Az = 248.13 ZA = 19.65 2008-Aug-10 00:26:02 STOP finish_task: Finishing task 'waiting on telescope' 2008-Aug-10 00:26:02 LOG5 finish_task: Level: (2) ID = <10022> Status = 0 0 0 0 ok 2008-Aug-10 00:26:02 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Aug-10 00:26:02 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 00:26:02 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Aug-10 00:26:02 LOG5 end_task: Level: (2) ID = <10022> Status = 0 0 0 0 ok 2008-Aug-10 00:26:02 LOG5 antvel: Calling 'antvel 223502.300000 242142.000000 J 0' 2008-Aug-10 00:26:02 LOG2 antvel: Precessing RA = 22:35:02.3 Dec = +24:21:42.0 Epoch = 2008.61059 J 2008-Aug-10 00:26:02 LOG2 antvel: Computed apparent RA = 22:35:28.7 Dec = +24:24:27.7 2008-Aug-10 00:26:02 LOG2 antvel: Parameters to Doppler: Topocentric 15962 2008 223 0.0 2008-Aug-10 00:26:02 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-10 00:26:02 LOG3 dopset_gen: Parameters for 'rest2sky': vel=12242.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Aug-10 00:26:02 INFO4 dopset_gen: New sky frequencies: 1364.679191 1364.679191 1364.679191 1364.679191 1364.679191 1364.679191 1364.679191 1364.679191 1364.679191 2008-Aug-10 00:26:02 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1364.679191 sky0=1364.679191 sky1=1364.679191 sky2=1364.679191 sky3=1364.679191 sky4=1364.679191 sky5=1364.679191 sky6=1364.679191 sky7=1364.679191 dest0=275 dest1=275 dest2=275 dest3=275 dest4=275 dest5=275 dest6=275 dest7=275 2008-Aug-10 00:26:02 LOG2 dopset_gen: Result from 'sky2syn': 11364.679191 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 2 2 2 2 2 2 2 2 2008-Aug-10 00:26:02 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 11364679191.0} 2008-Aug-10 00:26:02 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0} 2008-Aug-10 00:26:02 START begin_task: Starting task 'adjusting WAPP power' 2008-Aug-10 00:26:02 LOG5 begin_task: Level: (2) ID = <10025> Status = 0 0 0 0 ok 2008-Aug-10 00:26:02 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Aug-10 00:26:02 INFO2 adjust_power: Starting to adjust WAPP power 2008-Aug-10 00:26:02 LOG3 vw_send: To DATATAKING: adjpwrif1 2008-Aug-10 00:26:02 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif1' using string 'DONE' 2008-Aug-10 00:26:02 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 00:26:02 START begin_task: Starting task 'waiting on adjpwrif1' 2008-Aug-10 00:26:02 LOG5 begin_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-Aug-10 00:26:02 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 11364679191.0} 2008-Aug-10 00:26:02 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0} 2008-Aug-10 00:26:02 LOG4 got_cormsg: From DATATAKING: adjpwrif1 2008-Aug-10 00:26:02 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 00:26:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:26:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:26:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:26:05 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-10 00:26:05 STOP end_task: Finishing task 'waiting on adjpwrif1' with status 'OK' 2008-Aug-10 00:26:05 LOG5 end_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-Aug-10 00:26:05 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif1' 2008-Aug-10 00:26:05 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Aug-10 00:26:05 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Aug-10 00:26:05 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 00:26:05 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Aug-10 00:26:05 LOG5 begin_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2008-Aug-10 00:26:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:26:05 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Aug-10 00:26:05 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 00:26:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:26:07 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-10 00:26:07 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Aug-10 00:26:07 LOG5 end_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2008-Aug-10 00:26:07 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Aug-10 00:26:07 START begin_task: Starting task 'adjusting WAPP power' 2008-Aug-10 00:26:07 LOG5 begin_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2008-Aug-10 00:26:07 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Aug-10 00:26:07 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 50 2 1 0 0 0 2008-Aug-10 00:26:07 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 50 2 1 1 0 0 2008-Aug-10 00:26:07 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 25 2 1 0 0 0 2008-Aug-10 00:26:07 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 25 2 1 1 0 0 2008-Aug-10 00:26:07 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Aug-10 00:26:07 LOG5 begin_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2008-Aug-10 00:26:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:26:07 INFO2 WAPP=1-auto_atten_oneboard: Attenuators: 12 4 dB 2008-Aug-10 00:26:07 LOG4 WAPP=4-wappcon: Received command 'ADJUSTPOWER 25 2 1 1 0 0' 2008-Aug-10 00:26:07 LOG4 WAPP=3-wappcon: Received command 'ADJUSTPOWER 25 2 1 0 0 0' 2008-Aug-10 00:26:07 LOG4 WAPP=2-wappcon: Received command 'ADJUSTPOWER 50 2 1 1 0 0' 2008-Aug-10 00:26:07 LOG4 WAPP=1-wappcon: Received command 'ADJUSTPOWER 50 2 1 0 0 0' 2008-Aug-10 00:26:07 INFO2 WAPP=3-auto_atten_oneboard: Attenuators: 15 2 dB 2008-Aug-10 00:26:07 INFO2 WAPP=2-auto_atten_oneboard: Attenuators: 4 13 dB 2008-Aug-10 00:26:07 INFO2 WAPP=4-auto_atten_oneboard: Attenuators: 1 15 dB 2008-Aug-10 00:26:07 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Aug-10 00:26:07 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Aug-10 00:26:07 LOG5 end_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2008-Aug-10 00:26:07 INFO2 wapp_adjpwr: WAPP power: 1.041 0.927 0.914 1.154 2008-Aug-10 00:26:07 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Aug-10 00:26:07 LOG5 finish_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2008-Aug-10 00:26:07 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Aug-10 00:26:07 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 00:26:07 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Aug-10 00:26:07 LOG5 end_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2008-Aug-10 00:26:07 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Aug-10 00:26:07 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Aug-10 00:26:07 LOG5 finish_task: Level: (2) ID = <10025> Status = 0 0 0 0 ok 2008-Aug-10 00:26:07 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Aug-10 00:26:07 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 00:26:07 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Aug-10 00:26:07 LOG5 end_task: Level: (2) ID = <10025> Status = 0 0 0 0 ok 2008-Aug-10 00:26:07 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_onoff_on MESSAGE {Taking ON scan ...} 2008-Aug-10 00:26:07 LOG4 take_data: Calling 'take_data 300 1 ONOFF ON -' 2008-Aug-10 00:26:07 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-10 00:26:07 LOG5 begin_task: Level: (2) ID = <10030> Status = 0 0 0 0 ok 2008-Aug-10 00:26:07 INFO2 take_data: Starting WAPP scan: 822300001 2008-Aug-10 00:26:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 300 2008-Aug-10 00:26:08 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-10 00:26:08 LOG5 begin_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2008-Aug-10 00:26:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-10 00:26:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 15969.00 2008-Aug-10 00:26:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11364.679191 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2008-Aug-10 00:26:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1364.679191 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2008-Aug-10 00:26:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1364.679191 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2008-Aug-10 00:26:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1364.679191 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2008-Aug-10 00:26:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1364.679191 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2008-Aug-10 00:26:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.61) to the zenith angle limit 19.69 degrees! 2008-Aug-10 00:26:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 248.0992 19.6087 RA/Dec = 22:35:02 +24:21:42 2008-Aug-10 00:26:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.50) to the zenith angle limit 19.69 degrees! 2008-Aug-10 00:26:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 248.0154 19.4978 RA/Dec = 22:35:02 +24:21:42 2008-Aug-10 00:27:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.39) to the zenith angle limit 19.69 degrees! 2008-Aug-10 00:27:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 247.9305 19.3869 RA/Dec = 22:35:02 +24:21:42 2008-Aug-10 00:28:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.05) to the zenith angle limit 19.69 degrees! 2008-Aug-10 00:28:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 247.6681 19.0547 RA/Dec = 22:35:02 +24:21:42 2008-Aug-10 00:31:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-10 00:31:09 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-10 00:31:09 LOG5 end_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2008-Aug-10 00:31:09 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-10 00:31:09 LOG5 end_task: Level: (2) ID = <10030> Status = 0 0 0 0 ok 2008-Aug-10 00:31:09 LOG4 send_obs_status: To obs_status: <1> PART 2 INFO {Waiting for OFF observation followed by CAL} 2008-Aug-10 00:31:09 LOG2 onoff_wapp: Parameters: RA-offset: -90.456000000001922 arcminutes wait: 60 secs 2008-Aug-10 00:31:09 LOG4 track_offsets: Calling 'track_offsets -90.456000000001922 0.0 main small' 2008-Aug-10 00:31:09 START begin_task: Starting task 'sending telescope offsets' 2008-Aug-10 00:31:09 LOG5 begin_task: Level: (2) ID = <10032> Status = 0 0 0 0 ok 2008-Aug-10 00:31:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Telescope Offsets} INFO {Changing telescope offsets ...} 2008-Aug-10 00:31:09 INFO2 track_offsets: Starting to send new offsets 2008-Aug-10 00:31:09 LOG3 vw_send: To DATATAKING: hdrldsrcnm "J223502+242142" 2008-Aug-10 00:31:09 LOG3 vw_send: To DATATAKING: pnt tr 223502.300000 242142.000000 -CJ -o -UD -1.50760 0.0 -CH 2008-Aug-10 00:31:09 STOP finish_task: Finishing task 'sending telescope offsets' 2008-Aug-10 00:31:09 LOG5 finish_task: Level: (2) ID = <10032> Status = 0 0 0 0 ok 2008-Aug-10 00:31:09 INFO2 finish_task: DONE finished sending: telescope offsets 2008-Aug-10 00:31:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 00:31:09 STOP end_task: Finishing task 'sending telescope offsets' with status 'OK' 2008-Aug-10 00:31:09 LOG5 end_task: Level: (2) ID = <10032> Status = 0 0 0 0 ok 2008-Aug-10 00:31:09 INFO2 lstwait: Waiting for 59.8 secs from LST 21:20:14 to LST 21:21:14 ... 2008-Aug-10 00:31:09 LOG4 send_obs_status: To obs_status: <1> TASKTIME 59.836175999996598 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Aug-10 00:31:09 START begin_task: Starting task 'waiting on wait on LST' 2008-Aug-10 00:31:09 LOG5 begin_task: Level: (2) ID = <10033> Status = 0 0 0 0 ok 2008-Aug-10 00:31:09 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "J223502+242142" 2008-Aug-10 00:31:09 LOG4 got_cormsg: From DATATAKING: pnt tr 223502.300000 242142.000000 -CJ -o -UD -1.50760 0.0 -CH 2008-Aug-10 00:31:09 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Aug-10 00:31:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.69) to the zenith angle limit 19.69 degrees! 2008-Aug-10 00:31:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 248.1839 19.6923 RA/Dec = 22:41:04 +24:21:40 2008-Aug-10 00:31:56 INFO4 wait_and_tell_when_on_source: Telescope is now on source 'J223502+242142' (after 47 seconds) 2008-Aug-10 00:32:09 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Aug-10 00:32:09 LOG5 end_task: Level: (2) ID = <10033> Status = 0 0 0 0 ok 2008-Aug-10 00:32:09 LOG4 lstwait: Finished waiting 1.17 seconds late 2008-Aug-10 00:32:09 INFO3 lstwait: Finished waiting 2008-Aug-10 00:32:09 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Aug-10 00:32:09 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_onoff_off MESSAGE {Taking OFF scan ...} 2008-Aug-10 00:32:09 LOG4 take_data: Calling 'take_data 300 1 ONOFF OFF -' 2008-Aug-10 00:32:09 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-10 00:32:09 LOG5 begin_task: Level: (2) ID = <10034> Status = 0 0 0 0 ok 2008-Aug-10 00:32:09 INFO2 take_data: Starting WAPP scan: 822300002 2008-Aug-10 00:32:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 300 2008-Aug-10 00:32:10 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-10 00:32:10 LOG5 begin_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2008-Aug-10 00:32:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-10 00:32:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16331.00 2008-Aug-10 00:32:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11364.679191 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2008-Aug-10 00:32:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1364.679191 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2008-Aug-10 00:32:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1364.679191 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2008-Aug-10 00:32:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1364.679191 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2008-Aug-10 00:32:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1364.679191 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2008-Aug-10 00:32:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.61) to the zenith angle limit 19.69 degrees! 2008-Aug-10 00:32:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 248.1013 19.6118 RA/Dec = 22:41:04 +24:21:40 2008-Aug-10 00:32:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.50) to the zenith angle limit 19.69 degrees! 2008-Aug-10 00:32:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 248.0178 19.5009 RA/Dec = 22:41:04 +24:21:40 2008-Aug-10 00:33:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.39) to the zenith angle limit 19.69 degrees! 2008-Aug-10 00:33:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 247.9326 19.3899 RA/Dec = 22:41:04 +24:21:40 2008-Aug-10 00:34:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.06) to the zenith angle limit 19.69 degrees! 2008-Aug-10 00:34:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 247.6699 19.0579 RA/Dec = 22:41:04 +24:21:40 2008-Aug-10 00:37:11 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-10 00:37:11 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-10 00:37:11 LOG5 end_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2008-Aug-10 00:37:11 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-10 00:37:11 LOG5 end_task: Level: (2) ID = <10034> Status = 0 0 0 0 ok 2008-Aug-10 00:37:11 LOG2 take_cal: Calling 'take_cal hcorcal 10 0' 2008-Aug-10 00:37:11 START begin_task: Starting task 'WAPP calibration' 2008-Aug-10 00:37:11 LOG5 begin_task: Level: (2) ID = <10036> Status = 0 0 0 0 ok 2008-Aug-10 00:37:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Aug-10 00:37:11 START begin_task: Starting task 'selecting calibration type' 2008-Aug-10 00:37:11 LOG5 begin_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2008-Aug-10 00:37:11 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Aug-10 00:37:11 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Aug-10 00:37:11 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 00:37:11 START begin_task: Starting task 'waiting on setcal' 2008-Aug-10 00:37:11 LOG5 begin_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2008-Aug-10 00:37:11 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Aug-10 00:37:11 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 00:37:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:37:11 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-10 00:37:11 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Aug-10 00:37:11 LOG5 end_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2008-Aug-10 00:37:11 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Aug-10 00:37:11 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Aug-10 00:37:11 LOG5 end_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2008-Aug-10 00:37:11 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Aug-10 00:37:11 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Aug-10 00:37:11 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Aug-10 00:37:11 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-10 00:37:11 LOG5 begin_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2008-Aug-10 00:37:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:37:11 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-10 00:37:11 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Aug-10 00:37:11 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-10 00:37:11 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-10 00:37:11 LOG5 end_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2008-Aug-10 00:37:11 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Aug-10 00:37:12 LOG4 take_data: Calling 'take_data 10 10 CAL ON -' 2008-Aug-10 00:37:12 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-10 00:37:12 LOG5 begin_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2008-Aug-10 00:37:12 INFO2 take_data: Starting WAPP scan: 822300003 2008-Aug-10 00:37:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-10 00:37:12 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-10 00:37:12 LOG5 begin_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2008-Aug-10 00:37:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-10 00:37:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16633.00 2008-Aug-10 00:37:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11364.679191 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2008-Aug-10 00:37:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1364.679191 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2008-Aug-10 00:37:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1364.679191 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2008-Aug-10 00:37:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1364.679191 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2008-Aug-10 00:37:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1364.679191 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2008-Aug-10 00:37:23 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-10 00:37:23 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-10 00:37:23 LOG5 end_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2008-Aug-10 00:37:23 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-10 00:37:23 LOG5 end_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2008-Aug-10 00:37:23 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Aug-10 00:37:23 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Aug-10 00:37:23 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Aug-10 00:37:23 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-10 00:37:23 LOG5 begin_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2008-Aug-10 00:37:23 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-10 00:37:23 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-10 00:37:23 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-10 00:37:23 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-10 00:37:23 LOG5 end_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2008-Aug-10 00:37:23 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Aug-10 00:37:23 LOG4 take_data: Calling 'take_data 10 10 CAL OFF -' 2008-Aug-10 00:37:23 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-10 00:37:23 LOG5 begin_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2008-Aug-10 00:37:23 INFO2 take_data: Starting WAPP scan: 822300004 2008-Aug-10 00:37:24 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-10 00:37:24 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-10 00:37:24 LOG5 begin_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2008-Aug-10 00:37:24 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-10 00:37:24 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16645.00 2008-Aug-10 00:37:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11364.679191 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2008-Aug-10 00:37:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1364.679191 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2008-Aug-10 00:37:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1364.679191 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2008-Aug-10 00:37:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1364.679191 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2008-Aug-10 00:37:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1364.679191 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2008-Aug-10 00:37:35 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Aug-10 00:37:35 INFO1 WAPP=1+3+4-start_spectra: DONE with spectral line observation 2008-Aug-10 00:37:35 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-10 00:37:35 LOG5 end_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2008-Aug-10 00:37:35 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-10 00:37:35 LOG5 end_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2008-Aug-10 00:37:35 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Aug-10 00:37:35 STOP finish_task: Finishing task 'WAPP calibration' 2008-Aug-10 00:37:35 LOG5 finish_task: Level: (2) ID = <10036> Status = 0 0 0 0 ok 2008-Aug-10 00:37:35 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Aug-10 00:37:35 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 00:37:35 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Aug-10 00:37:35 LOG5 end_task: Level: (2) ID = <10036> Status = 0 0 0 0 ok 2008-Aug-10 00:37:35 START begin_task: Starting task 'clearing telescope offsets' 2008-Aug-10 00:37:35 LOG5 begin_task: Level: (2) ID = <10045> Status = 0 0 0 0 ok 2008-Aug-10 00:37:35 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Clearing Telescope Offsets} INFO {Removing telescope offsets ...} 2008-Aug-10 00:37:35 INFO3 clear_offsets: Removing telescope offsets 2008-Aug-10 00:37:35 LOG3 vw_send: To DATATAKING: hdrldsrcnm "J223502+242142" 2008-Aug-10 00:37:35 LOG3 vw_send: To DATATAKING: pnt tr 223502.300000 242142.000000 -CJ 2008-Aug-10 00:37:35 STOP finish_task: Finishing task 'clearing telescope offsets' 2008-Aug-10 00:37:35 LOG5 finish_task: Level: (2) ID = <10045> Status = 0 0 0 0 ok 2008-Aug-10 00:37:35 INFO2 finish_task: DONE finished clearing: telescope offsets 2008-Aug-10 00:37:35 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 00:37:35 STOP end_task: Finishing task 'clearing telescope offsets' with status 'OK' 2008-Aug-10 00:37:35 LOG5 end_task: Level: (2) ID = <10045> Status = 0 0 0 0 ok 2008-Aug-10 00:37:35 STOP finish_task: Finishing task 'standard on/off' 2008-Aug-10 00:37:35 LOG5 finish_task: Level: (1) ID = <10015> Status = 0 0 0 0 ok 2008-Aug-10 00:37:35 DONE finish_task: DONE finished pattern: standard on/off 2008-Aug-10 00:37:35 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Aug-10 00:37:35 END end_task: Finishing task 'standard on/off' with status 'OK' 2008-Aug-10 00:37:35 LOG5 end_task: Level: (1) ID = <10015> Status = 0 0 0 0 ok 2008-Aug-10 00:37:36 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "J223502+242142" 2008-Aug-10 00:37:36 INFO1 WAPP=2-start_spectra: DONE with spectral line observation 2008-Aug-10 00:37:36 LOG4 got_cormsg: From DATATAKING: pnt tr 223502.300000 242142.000000 -CJ 2008-Aug-10 00:37:36 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Aug-10 00:37:55 INFO1 CIMA-run_command_file: Transferring command file 'command_galfasrc.cmd ' to executive ... 2008-Aug-10 00:37:56 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 5 {LOAD togs_ages.conf} 2008-Aug-10 00:37:56 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 6 {CATALOG togs_ages.cat} 2008-Aug-10 00:37:56 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {GOTO galfasrc} 2008-Aug-10 00:37:56 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {ALFAANGLE 19} 2008-Aug-10 00:37:56 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {WAITTRACK} 2008-Aug-10 00:37:56 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 13 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2008-Aug-10 00:37:56 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-Aug-10 00:37:56 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc.cmd 1 1 6 2008-Aug-10 00:37:56 LOG4 run_command_file: Calling 'run_command_file command_galfasrc.cmd 1 1 6' 2008-Aug-10 00:37:56 BEGIN begin_task: Starting task 'running command file 'command_galfasrc.cmd'' 2008-Aug-10 00:37:56 LOG5 begin_task: Level: (1) ID = <10046> Status = 0 0 0 0 ok 2008-Aug-10 00:37:56 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc.cmd' ...} 2008-Aug-10 00:37:56 NOTE run_command_file: Starting execution of command file 'command_galfasrc.cmd' from line 1 2008-Aug-10 00:37:56 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_ages.conf' 2008-Aug-10 00:37:56 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2008-Aug-10 00:37:56 NOTE CIMA-check_config_file: File 'togs_ages.conf' contains a observing mode set-up which will be ignored! 2008-Aug-10 00:37:56 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Aug-10 00:37:56 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2008-Aug-10 00:37:56 NOTE CIMA-load_config_file: Loading configuration file 'togs_ages.conf' 2008-Aug-10 00:37:56 ALERT CIMA-new_receiver: A change between ALFA and another receiver requires a reconfiguration of the WAPPs! 2008-Aug-10 00:37:56 INFO4 CIMA-antvel: Computed apparent RA = 22:35:28.7 Dec = +24:24:27.7 from RA = 22:35:02.3 Dec = +24:21:42.0 Epoch = 2008.61061 J 2008-Aug-10 00:37:56 INFO4 CIMA-antvel: Parameters to Doppler: Topocentric 16676.0 2008 223 0 2008-Aug-10 00:37:56 INFO3 CIMA-antvel: Computed velocity correction 0.0000000000 2008-Aug-10 00:37:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Aug-10 00:37:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Aug-10 00:37:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Aug-10 00:37:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Aug-10 00:37:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Aug-10 00:37:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2008-Aug-10 00:37:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Aug-10 00:37:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1381.2" 2008-Aug-10 00:37:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1381.2" 2008-Aug-10 00:37:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1381.2" 2008-Aug-10 00:37:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1381.2" 2008-Aug-10 00:37:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1381.2" 2008-Aug-10 00:37:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1381.2" 2008-Aug-10 00:37:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1381.2" 2008-Aug-10 00:37:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1381.2" 2008-Aug-10 00:37:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1381.2" 2008-Aug-10 00:37:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Aug-10 00:37:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Aug-10 00:37:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Aug-10 00:37:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Aug-10 00:37:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Aug-10 00:37:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Aug-10 00:37:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Aug-10 00:37:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Aug-10 00:37:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Aug-10 00:37:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Aug-10 00:37:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Aug-10 00:37:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Aug-10 00:37:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Aug-10 00:37:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2008-Aug-10 00:37:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Aug-10 00:37:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Aug-10 00:37:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Aug-10 00:37:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Aug-10 00:37:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Aug-10 00:37:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Aug-10 00:37:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Aug-10 00:37:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Aug-10 00:37:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Aug-10 00:37:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1577.011592" 2008-Aug-10 00:37:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Aug-10 00:37:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Aug-10 00:37:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Aug-10 00:37:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Aug-10 00:37:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Aug-10 00:37:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Aug-10 00:37:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Aug-10 00:37:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Aug-10 00:37:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Aug-10 00:37:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Aug-10 00:37:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Aug-10 00:37:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Aug-10 00:37:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Aug-10 00:37:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Aug-10 00:37:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Aug-10 00:37:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Aug-10 00:37:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Aug-10 00:37:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Aug-10 00:37:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Aug-10 00:37:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Aug-10 00:37:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Aug-10 00:37:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Aug-10 00:37:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Aug-10 00:37:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Aug-10 00:37:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Aug-10 00:37:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Aug-10 00:37:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Aug-10 00:37:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Aug-10 00:37:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Aug-10 00:37:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Aug-10 00:37:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Aug-10 00:37:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Aug-10 00:37:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Aug-10 00:37:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Aug-10 00:37:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Aug-10 00:37:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Aug-10 00:37:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Aug-10 00:37:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Aug-10 00:37:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Aug-10 00:37:58 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Aug-10 00:37:58 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Aug-10 00:37:58 LOG5 begin_task: Level: (2) ID = <10047> Status = 0 0 0 0 ok 2008-Aug-10 00:37:58 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Aug-10 00:37:58 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Aug-10 00:37:58 INFO1 config_iflo: Selecting receiver ALFA 2008-Aug-10 00:37:58 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2008-Aug-10 00:37:58 LOG1 select_receiver: Calling 'select_receiver alfa no no no' 2008-Aug-10 00:37:58 START begin_task: Starting task 'selecting receiver ALFA' 2008-Aug-10 00:37:58 LOG5 begin_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2008-Aug-10 00:37:58 NOTE select_receiver: Starting to select receiver ALFA 2008-Aug-10 00:37:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Aug-10 00:37:58 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Aug-10 00:37:58 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Aug-10 00:37:58 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Aug-10 00:37:58 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Aug-10 00:37:58 LOG5 finish_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2008-Aug-10 00:37:58 INFO2 finish_task: DONE finished selecting: receiver ALFA 2008-Aug-10 00:37:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 00:37:59 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Aug-10 00:37:59 LOG5 end_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2008-Aug-10 00:37:59 START begin_task: Starting task 'waiting for receiver ALFA' 2008-Aug-10 00:37:59 LOG5 begin_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2008-Aug-10 00:37:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 131.4 BITMAP stat_alfa_rot INFO {Waiting on rotating floor} 2008-Aug-10 00:37:59 START begin_task: Starting task 'waiting on waiting for receiver rotation' 2008-Aug-10 00:37:59 LOG5 begin_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2008-Aug-10 00:37:59 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Aug-10 00:37:59 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Aug-10 00:38:05 LOG4 got_cormsg: From DATATAKING: waiting for turret position:26.64 2008-Aug-10 00:40:06 STOP end_task: Finishing task 'waiting on waiting for receiver rotation' with status 'OK' 2008-Aug-10 00:40:06 LOG5 end_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2008-Aug-10 00:40:06 LOG4 send_obs_status: To obs_status: <0> TASKWAIT 2008-Aug-10 00:40:06 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2008-Aug-10 00:40:06 LOG5 end_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2008-Aug-10 00:40:06 INFO1 config_iflo: Configuring rest of the IF/LO path 2008-Aug-10 00:40:06 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2008-Aug-10 00:40:06 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-10 00:40:06 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Aug-10 00:40:06 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-10 00:40:06 LOG5 begin_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2008-Aug-10 00:40:06 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-10 00:40:06 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-10 00:40:06 LOG5 end_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2008-Aug-10 00:40:06 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-10 00:40:06 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Aug-10 00:40:06 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2008-Aug-10 00:40:06 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2008-Aug-10 00:40:06 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Aug-10 00:40:06 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Aug-10 00:40:06 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2008-Aug-10 00:40:06 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2008-Aug-10 00:40:06 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2008-Aug-10 00:40:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1577011592.0} 2008-Aug-10 00:40:06 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2008-Aug-10 00:40:06 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2008-Aug-10 00:40:06 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Aug-10 00:40:06 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Aug-10 00:40:06 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Aug-10 00:40:06 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Aug-10 00:40:06 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Aug-10 00:40:06 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2008-Aug-10 00:40:06 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2008-Aug-10 00:40:06 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2008-Aug-10 00:40:06 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2008-Aug-10 00:40:06 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Aug-10 00:40:06 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2008-Aug-10 00:40:06 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Aug-10 00:40:06 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Aug-10 00:40:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:40:06 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2008-Aug-10 00:40:06 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2008-Aug-10 00:40:06 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Aug-10 00:40:06 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2008-Aug-10 00:40:06 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2008-Aug-10 00:40:06 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Aug-10 00:40:07 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 00:40:07 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Aug-10 00:40:07 LOG5 begin_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2008-Aug-10 00:40:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2008-Aug-10 00:40:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1577011592.0} 2008-Aug-10 00:40:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Aug-10 00:40:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Aug-10 00:40:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:40:07 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 00:40:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:40:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:40:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:40:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:40:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:40:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:40:11 LOG4 got_cormsg: From DATATAKING: vw% DONE 2008-Aug-10 00:40:11 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Aug-10 00:40:11 LOG5 end_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2008-Aug-10 00:40:11 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Aug-10 00:40:11 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Aug-10 00:40:11 LOG5 finish_task: Level: (2) ID = <10047> Status = 0 0 0 0 ok 2008-Aug-10 00:40:11 DONE finish_task: DONE finished configuration: IF/LO path 2008-Aug-10 00:40:11 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Aug-10 00:40:11 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Aug-10 00:40:11 LOG5 end_task: Level: (2) ID = <10047> Status = 0 0 0 0 ok 2008-Aug-10 00:40:11 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Aug-10 00:40:11 LOG5 begin_task: Level: (2) ID = <10053> Status = 0 0 0 0 ok 2008-Aug-10 00:40:11 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Aug-10 00:40:11 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Aug-10 00:40:11 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2008-Aug-10 00:40:11 START begin_task: Starting task 'selecting calibration port' 2008-Aug-10 00:40:11 LOG5 begin_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2008-Aug-10 00:40:11 LOG3 vw_send: To DATATAKING: calport 3 2008-Aug-10 00:40:11 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Aug-10 00:40:11 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 00:40:11 START begin_task: Starting task 'waiting on calport' 2008-Aug-10 00:40:11 LOG5 begin_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2008-Aug-10 00:40:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:40:12 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Aug-10 00:40:12 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 00:40:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:40:12 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-10 00:40:12 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Aug-10 00:40:12 LOG5 end_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2008-Aug-10 00:40:12 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Aug-10 00:40:12 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Aug-10 00:40:12 LOG5 end_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2008-Aug-10 00:40:12 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Aug-10 00:40:12 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Aug-10 00:40:12 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-10 00:40:12 LOG5 begin_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2008-Aug-10 00:40:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:40:12 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-10 00:40:12 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-10 00:40:12 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-10 00:40:12 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-10 00:40:12 LOG5 end_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2008-Aug-10 00:40:12 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Aug-10 00:40:12 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Aug-10 00:40:12 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Aug-10 00:40:12 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Aug-10 00:40:12 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Aug-10 00:40:12 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Aug-10 00:40:12 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Aug-10 00:40:12 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Aug-10 00:40:12 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 RM 2008-Aug-10 00:40:12 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 RM 2008-Aug-10 00:40:12 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 RM 2008-Aug-10 00:40:12 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 RM 2008-Aug-10 00:40:12 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Aug-10 00:40:12 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Aug-10 00:40:12 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-10 00:40:12 LOG5 begin_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2008-Aug-10 00:40:12 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Aug-10 00:40:12 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-10 00:40:12 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Aug-10 00:40:12 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-10 00:40:12 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 RM' 2008-Aug-10 00:40:12 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-10 00:40:12 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-10 00:40:12 LOG5 end_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2008-Aug-10 00:40:12 LOG3 sock_errsend: To WAPPDATA: FLUSH 2008-Aug-10 00:40:12 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Aug-10 00:40:12 LOG5 finish_task: Level: (2) ID = <10053> Status = 0 0 0 0 ok 2008-Aug-10 00:40:12 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Aug-10 00:40:12 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Aug-10 00:40:12 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Aug-10 00:40:12 LOG5 end_task: Level: (2) ID = <10053> Status = 0 0 0 0 ok 2008-Aug-10 00:40:12 COMMAND run_command_line: EXECUTING command 6: 'CATALOG togs_ages.cat' 2008-Aug-10 00:40:12 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/togs_ages.cat' 2008-Aug-10 00:40:13 COMMAND run_command_line: EXECUTING command 7: 'GOTO galfasrc' 2008-Aug-10 00:40:13 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2048/togs_ages.cat galfasrc nooffset nowait' 2008-Aug-10 00:40:13 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2008-Aug-10 00:40:13 LOG5 begin_task: Level: (2) ID = <10058> Status = 0 0 0 0 ok 2008-Aug-10 00:40:13 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2008-Aug-10 00:40:13 LOG3 track_source: Calling 'track_source galfasrc 224000.0 +155900 J 0.0 0.0 main small /share/obs4/usr/a2048/togs_ages.cat 0 Topocentric velocity(optical)' 2008-Aug-10 00:40:13 START begin_task: Starting task 'sending tracking commands' 2008-Aug-10 00:40:13 LOG5 begin_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2008-Aug-10 00:40:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2008-Aug-10 00:40:13 INFO1 track_source: Starting to track galfasrc 2008-Aug-10 00:40:13 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2008-Aug-10 00:40:13 LOG3 vw_send: To DATATAKING: set ra 224000.0 2008-Aug-10 00:40:13 LOG3 vw_send: To DATATAKING: set dec +155900 2008-Aug-10 00:40:13 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Aug-10 00:40:13 LOG3 vw_send: To DATATAKING: pnt tr 224000.0 +155900 -CJ 2008-Aug-10 00:40:13 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Aug-10 00:40:13 STOP finish_task: Finishing task 'sending tracking commands' 2008-Aug-10 00:40:13 LOG5 finish_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2008-Aug-10 00:40:13 INFO2 finish_task: DONE finished sending: tracking commands 2008-Aug-10 00:40:13 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 00:40:13 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Aug-10 00:40:13 LOG5 end_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2008-Aug-10 00:40:13 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2008-Aug-10 00:40:13 LOG5 finish_task: Level: (2) ID = <10058> Status = 0 0 0 0 ok 2008-Aug-10 00:40:13 DONE finish_task: DONE finished tracking: source 'galfasrc' 2008-Aug-10 00:40:13 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Aug-10 00:40:13 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2008-Aug-10 00:40:13 LOG5 end_task: Level: (2) ID = <10058> Status = 0 0 0 0 ok 2008-Aug-10 00:40:13 COMMAND run_command_line: EXECUTING command 8: 'ALFAANGLE 19' 2008-Aug-10 00:40:13 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2008-Aug-10 00:40:13 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Aug-10 00:40:13 LOG5 begin_task: Level: (2) ID = <10060> Status = 0 0 0 0 ok 2008-Aug-10 00:40:13 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Aug-10 00:40:13 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Aug-10 00:40:13 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-Aug-10 00:40:13 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Aug-10 00:40:13 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Aug-10 00:40:13 LOG5 begin_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2008-Aug-10 00:40:13 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Aug-10 00:40:13 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2008-Aug-10 00:40:13 LOG4 got_cormsg: From DATATAKING: set ra 224000.0 2008-Aug-10 00:40:13 LOG4 got_cormsg: From DATATAKING: set dec +155900 2008-Aug-10 00:40:13 LOG4 got_cormsg: From DATATAKING: vw% 224000.0 2008-Aug-10 00:40:13 LOG4 got_cormsg: From DATATAKING: vw% +155900 2008-Aug-10 00:40:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:40:13 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Aug-10 00:40:13 LOG4 got_cormsg: From DATATAKING: pnt tr 224000.0 +155900 -CJ 2008-Aug-10 00:40:13 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Aug-10 00:40:13 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Aug-10 00:40:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:40:21 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Aug-10 00:40:21 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Aug-10 00:40:21 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Aug-10 00:40:21 LOG5 end_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2008-Aug-10 00:40:21 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Aug-10 00:40:21 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Aug-10 00:40:21 LOG5 finish_task: Level: (2) ID = <10060> Status = 0 0 0 0 ok 2008-Aug-10 00:40:21 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Aug-10 00:40:21 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Aug-10 00:40:21 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Aug-10 00:40:21 LOG5 end_task: Level: (2) ID = <10060> Status = 0 0 0 0 ok 2008-Aug-10 00:40:21 COMMAND run_command_line: EXECUTING command 9: 'WAITTRACK' 2008-Aug-10 00:40:21 BEGIN begin_task: Starting task 'waiting on telescope' 2008-Aug-10 00:40:21 LOG5 begin_task: Level: (2) ID = <10062> Status = 0 0 0 0 ok 2008-Aug-10 00:40:21 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Aug-10 00:40:21 LOG3 waittrk: Start waittrk 5 2008-Aug-10 00:40:21 START begin_task: Starting task 'waiting on telescope movement' 2008-Aug-10 00:40:21 LOG5 begin_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2008-Aug-10 00:40:26 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Aug-10 00:40:26 LOG5 end_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2008-Aug-10 00:40:26 START begin_task: Starting task 'waiting on telescope on source' 2008-Aug-10 00:40:26 LOG5 begin_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2008-Aug-10 00:41:40 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Aug-10 00:41:40 LOG5 end_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2008-Aug-10 00:41:40 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Aug-10 00:41:40 INFO2 waittrk: Now tracking galfasrc 2008-Aug-10 00:41:40 LOG4 waittrk: Current telescope position: Az = 274.90 ZA = 16.80 2008-Aug-10 00:41:40 STOP finish_task: Finishing task 'waiting on telescope' 2008-Aug-10 00:41:40 LOG5 finish_task: Level: (2) ID = <10062> Status = 0 0 0 0 ok 2008-Aug-10 00:41:40 DONE finish_task: DONE finished waiting: telescope on source 2008-Aug-10 00:41:40 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Aug-10 00:41:40 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Aug-10 00:41:40 LOG5 end_task: Level: (2) ID = <10062> Status = 0 0 0 0 ok 2008-Aug-10 00:41:40 COMMAND run_command_line: EXECUTING command 13: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2008-Aug-10 00:41:40 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2008-Aug-10 00:41:40 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Aug-10 00:41:40 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first 0 {1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2008-Aug-10 00:41:40 BEGIN begin_task: Starting task 'smart frequency switching' 2008-Aug-10 00:41:40 LOG5 begin_task: Level: (2) ID = <10065> Status = 0 0 0 0 ok 2008-Aug-10 00:41:40 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'galfasrc' 2008-Aug-10 00:41:40 INFO1 smartfreq: Starting pattern: Smart frequency switching 2008-Aug-10 00:41:40 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2008-Aug-10 00:41:40 START begin_task: Starting task 'selecting calibration type' 2008-Aug-10 00:41:40 LOG5 begin_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2008-Aug-10 00:41:40 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Aug-10 00:41:40 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Aug-10 00:41:40 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 00:41:40 START begin_task: Starting task 'waiting on setcal' 2008-Aug-10 00:41:40 LOG5 begin_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2008-Aug-10 00:41:40 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Aug-10 00:41:40 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 00:41:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:41:41 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-10 00:41:41 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Aug-10 00:41:41 LOG5 end_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2008-Aug-10 00:41:41 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Aug-10 00:41:41 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-10 00:41:41 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Aug-10 00:41:41 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-10 00:41:41 LOG5 begin_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2008-Aug-10 00:41:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:41:41 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-10 00:41:41 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-10 00:41:41 LOG5 end_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2008-Aug-10 00:41:41 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-10 00:41:41 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Aug-10 00:41:41 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-10 00:41:41 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Aug-10 00:41:41 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-10 00:41:41 LOG5 begin_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2008-Aug-10 00:41:41 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-10 00:41:41 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-10 00:41:41 LOG5 end_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2008-Aug-10 00:41:41 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-10 00:41:41 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Aug-10 00:41:41 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Aug-10 00:41:41 LOG5 end_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2008-Aug-10 00:41:41 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 RM 2008-Aug-10 00:41:41 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 RM 2008-Aug-10 00:41:41 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 RM 2008-Aug-10 00:41:41 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 RM 2008-Aug-10 00:41:41 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2008-Aug-10 00:41:41 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Aug-10 00:41:41 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2008-Aug-10 00:41:41 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Aug-10 00:41:41 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Aug-10 00:41:41 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-10 00:41:41 LOG5 begin_task: Level: (3) ID = <10070> Status = 0 0 0 0 ok 2008-Aug-10 00:41:41 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 RM' 2008-Aug-10 00:41:41 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-10 00:41:41 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-10 00:41:41 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-10 00:41:41 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-10 00:41:41 LOG5 end_task: Level: (3) ID = <10070> Status = 0 0 0 0 ok 2008-Aug-10 00:41:41 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2008-Aug-10 00:41:41 START begin_task: Starting task 'adjusting WAPP power' 2008-Aug-10 00:41:41 LOG5 begin_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2008-Aug-10 00:41:41 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Aug-10 00:41:41 INFO2 adjust_power: Starting to adjust WAPP power 2008-Aug-10 00:41:41 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Aug-10 00:41:41 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Aug-10 00:41:42 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 00:41:42 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Aug-10 00:41:42 LOG5 begin_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2008-Aug-10 00:41:42 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Aug-10 00:41:42 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 00:41:42 NOTE WAPPDATA-new_file: New FITS file: wapp.20080810.a2048.0001.fits 2008-Aug-10 00:41:42 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080810.a2048.0001.fits} 2008-Aug-10 00:41:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:41:45 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-10 00:41:45 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Aug-10 00:41:45 LOG5 end_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2008-Aug-10 00:41:45 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Aug-10 00:41:45 START begin_task: Starting task 'adjusting WAPP power' 2008-Aug-10 00:41:45 LOG5 begin_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2008-Aug-10 00:41:45 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Aug-10 00:41:45 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Aug-10 00:41:45 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Aug-10 00:41:45 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Aug-10 00:41:45 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Aug-10 00:41:45 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Aug-10 00:41:45 LOG5 begin_task: Level: (5) ID = <10074> Status = 0 0 0 0 ok 2008-Aug-10 00:41:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:41:45 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Aug-10 00:41:45 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 7 7 dB 2008-Aug-10 00:41:45 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 4 4 dB --- beam 5: 7 6 dB 2008-Aug-10 00:41:45 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 7 5 dB --- beam 3: 5 4 dB 2008-Aug-10 00:41:45 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 4 3 dB --- beam 7: 3 3 dB 2008-Aug-10 00:41:45 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Aug-10 00:41:45 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Aug-10 00:41:45 LOG5 end_task: Level: (5) ID = <10074> Status = 0 0 0 0 ok 2008-Aug-10 00:41:45 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.088 1.033 ALFA beam 1: 1.109 0.934 2008-Aug-10 00:41:45 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.898 0.940 ALFA beam 3: 0.968 0.882 2008-Aug-10 00:41:45 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.911 0.870 ALFA beam 5: 0.976 1.048 2008-Aug-10 00:41:45 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.867 0.919 ALFA beam 7: 0.985 1.044 2008-Aug-10 00:41:45 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Aug-10 00:41:45 LOG5 finish_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2008-Aug-10 00:41:45 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Aug-10 00:41:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 00:41:45 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Aug-10 00:41:45 LOG5 end_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2008-Aug-10 00:41:45 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Aug-10 00:41:45 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Aug-10 00:41:45 LOG5 finish_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2008-Aug-10 00:41:45 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Aug-10 00:41:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 00:41:45 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Aug-10 00:41:45 LOG5 end_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2008-Aug-10 00:41:45 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2008-Aug-10 00:41:45 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2008-Aug-10 00:41:45 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2008-Aug-10 00:41:45 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2008-Aug-10 00:41:45 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2008.61062 J 2008-Aug-10 00:41:45 LOG2 antvel: Computed apparent RA = 22:40:27.2 Dec = +16:01:48.3 2008-Aug-10 00:41:45 LOG2 antvel: Parameters to Doppler: Topocentric 16905 2008 223 0.0 2008-Aug-10 00:41:45 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-10 00:41:45 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2008-Aug-10 00:41:45 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2008-Aug-10 00:41:45 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-10 00:41:45 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-10 00:41:46 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Aug-10 00:41:46 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:41:46 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Aug-10 00:41:46 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-10 00:41:46 LOG5 begin_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2008-Aug-10 00:41:46 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 21.514575 2008.6106201041905 18.999933 2008-Aug-10 00:41:46 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666661 15.983333333333333 2008-Aug-10 00:41:46 LOG4 log_alfabeam: ALFABEAM 1 22.659307286308145 15.985368637951550 2008-Aug-10 00:41:46 LOG4 log_alfabeam: ALFABEAM 2 22.663194049008045 15.904899828186782 2008-Aug-10 00:41:46 LOG4 log_alfabeam: ALFABEAM 3 22.670550715731565 15.902480190375103 2008-Aug-10 00:41:46 LOG4 log_alfabeam: ALFABEAM 4 22.674027378956648 15.981452986274226 2008-Aug-10 00:41:46 LOG4 log_alfabeam: ALFABEAM 5 22.670116900768598 16.062175274328467 2008-Aug-10 00:41:46 LOG4 log_alfabeam: ALFABEAM 6 22.662753599385116 16.063671002446171 2008-Aug-10 00:41:46 INFO2 take_data: Starting WAPP+GALFA scan: 822300005 2008-Aug-10 00:41:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-10 00:41:46 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-10 00:41:46 LOG5 begin_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2008-Aug-10 00:41:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-10 00:41:46 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Aug-10 00:41:46 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:41:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:41:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:41:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16907.00 2008-Aug-10 00:41:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-10 00:41:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:41:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:41:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:41:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:41:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:41:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:41:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:41:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:41:48 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:41:49 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:41:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.735 < 0.75)! 2008-Aug-10 00:41:50 LOG4 check_wapp_levels: WAPP-1 power levels: 0.872 0.893 0.911 0.857 2008-Aug-10 00:41:50 LOG4 check_wapp_levels: WAPP-2 power levels: 0.755 0.769 0.771 0.810 2008-Aug-10 00:41:50 LOG4 check_wapp_levels: WAPP-3 power levels: 0.767 0.762 0.735 0.820 2008-Aug-10 00:41:50 LOG4 check_wapp_levels: WAPP-4 power levels: 0.741 0.840 0.834 0.934 2008-Aug-10 00:41:50 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:41:51 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:41:52 INFO5 check_wapp_levels: WAPP power levels are between 0.734 and 0.934 (still bad) 2008-Aug-10 00:41:52 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:41:53 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:41:54 INFO5 check_wapp_levels: WAPP power levels are between 0.737 and 0.934 (still bad) 2008-Aug-10 00:41:54 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:41:55 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:41:56 INFO5 check_wapp_levels: WAPP power levels are between 0.736 and 0.932 (still bad) 2008-Aug-10 00:41:56 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:41:57 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:41:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-10 00:41:57 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-10 00:41:57 LOG5 end_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2008-Aug-10 00:41:57 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-10 00:41:57 LOG5 end_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2008-Aug-10 00:41:57 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2008-Aug-10 00:41:57 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2008-Aug-10 00:41:57 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2008-Aug-10 00:41:57 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2008-Aug-10 00:41:57 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2008.61062 J 2008-Aug-10 00:41:57 LOG2 antvel: Computed apparent RA = 22:40:27.2 Dec = +16:01:48.3 2008-Aug-10 00:41:57 LOG2 antvel: Parameters to Doppler: Topocentric 16917 2008 223 0.0 2008-Aug-10 00:41:57 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-10 00:41:57 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2008-Aug-10 00:41:57 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2008-Aug-10 00:41:57 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-10 00:41:57 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-10 00:41:57 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Aug-10 00:41:57 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:41:57 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Aug-10 00:41:57 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-10 00:41:57 LOG5 begin_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2008-Aug-10 00:41:57 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 21.517917 2008.6106204844475 18.999933 2008-Aug-10 00:41:57 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666664 15.983333333333345 2008-Aug-10 00:41:57 LOG4 log_alfabeam: ALFABEAM 1 22.659307326118945 15.985397404330872 2008-Aug-10 00:41:57 LOG4 log_alfabeam: ALFABEAM 2 22.663192554000553 15.904913888618237 2008-Aug-10 00:41:57 LOG4 log_alfabeam: ALFABEAM 3 22.670549173876708 15.902464430605672 2008-Aug-10 00:41:57 LOG4 log_alfabeam: ALFABEAM 4 22.674027345423077 15.981424848940687 2008-Aug-10 00:41:57 LOG4 log_alfabeam: ALFABEAM 5 22.670118328947222 16.062162564178834 2008-Aug-10 00:41:57 LOG4 log_alfabeam: ALFABEAM 6 22.662755054864636 16.063685374729385 2008-Aug-10 00:41:57 INFO2 take_data: Starting WAPP+GALFA scan: 822300006 2008-Aug-10 00:41:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-10 00:41:58 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-10 00:41:58 LOG5 begin_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2008-Aug-10 00:41:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-10 00:41:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Aug-10 00:41:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:41:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:41:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:41:58 INFO5 check_wapp_levels: WAPP power levels are between 0.736 and 0.933 (still bad) 2008-Aug-10 00:41:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16919.00 2008-Aug-10 00:42:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-10 00:42:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:42:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:42:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:42:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:42:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:42:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:42:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:42:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:42:00 INFO5 check_wapp_levels: WAPP power levels are between 0.736 and 0.933 (still bad) 2008-Aug-10 00:42:00 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:42:01 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:42:02 INFO5 check_wapp_levels: WAPP power levels are between 0.692 and 0.908 (still bad) 2008-Aug-10 00:42:02 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:42:03 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:42:04 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:42:04 INFO5 check_wapp_levels: WAPP power levels are between 0.691 and 0.907 (still bad) 2008-Aug-10 00:42:05 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:42:06 INFO5 check_wapp_levels: WAPP power levels are between 0.693 and 0.910 (still bad) 2008-Aug-10 00:42:06 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:42:07 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:42:08 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:42:08 INFO5 check_wapp_levels: WAPP power levels are between 0.690 and 0.907 (still bad) 2008-Aug-10 00:42:09 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:42:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-10 00:42:09 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-10 00:42:09 LOG5 end_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2008-Aug-10 00:42:09 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-10 00:42:09 LOG5 end_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2008-Aug-10 00:42:09 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2008-Aug-10 00:42:09 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2008-Aug-10 00:42:09 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2008-Aug-10 00:42:09 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2008-Aug-10 00:42:09 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2008.61062 J 2008-Aug-10 00:42:09 LOG2 antvel: Computed apparent RA = 22:40:27.2 Dec = +16:01:48.3 2008-Aug-10 00:42:09 LOG2 antvel: Parameters to Doppler: Topocentric 16929 2008 223 0.0 2008-Aug-10 00:42:09 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-10 00:42:09 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2008-Aug-10 00:42:09 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2008-Aug-10 00:42:09 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-10 00:42:09 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-10 00:42:09 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Aug-10 00:42:09 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:42:09 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Aug-10 00:42:09 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-10 00:42:09 LOG5 begin_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2008-Aug-10 00:42:09 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 21.521260 2008.6106208647045 18.999933 2008-Aug-10 00:42:09 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666661 15.983333333333333 2008-Aug-10 00:42:09 LOG4 log_alfabeam: ALFABEAM 1 22.659307366820691 15.985426422324613 2008-Aug-10 00:42:09 LOG4 log_alfabeam: ALFABEAM 2 22.663191046248215 15.904928076679450 2008-Aug-10 00:42:09 LOG4 log_alfabeam: ALFABEAM 3 22.670547618282018 15.902448540825594 2008-Aug-10 00:42:09 LOG4 log_alfabeam: ALFABEAM 4 22.674027311064119 15.981396463566172 2008-Aug-10 00:42:09 LOG4 log_alfabeam: ALFABEAM 5 22.670119769559179 16.062149735010017 2008-Aug-10 00:42:09 LOG4 log_alfabeam: ALFABEAM 6 22.662756523505674 16.063699869994409 2008-Aug-10 00:42:09 INFO2 take_data: Starting WAPP+GALFA scan: 822300007 2008-Aug-10 00:42:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-10 00:42:10 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-10 00:42:10 LOG5 begin_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2008-Aug-10 00:42:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-10 00:42:10 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Aug-10 00:42:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:42:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:42:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:42:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16931.00 2008-Aug-10 00:42:11 INFO5 check_wapp_levels: WAPP power levels are between 0.692 and 0.909 (still bad) 2008-Aug-10 00:42:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-10 00:42:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:42:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:42:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:42:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:42:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:42:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:42:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:42:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:42:12 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:42:13 INFO5 check_wapp_levels: WAPP power levels are between 0.695 and 0.909 (still bad) 2008-Aug-10 00:42:13 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:42:14 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:42:15 INFO5 check_wapp_levels: WAPP power levels are between 0.691 and 0.906 (still bad) 2008-Aug-10 00:42:15 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:42:16 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:42:17 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:42:17 INFO5 check_wapp_levels: WAPP power levels are between 0.696 and 0.908 (still bad) 2008-Aug-10 00:42:18 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:42:19 INFO5 check_wapp_levels: WAPP power levels are between 0.689 and 0.906 (still bad) 2008-Aug-10 00:42:19 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:42:20 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:42:21 INFO5 check_wapp_levels: WAPP power levels are between 0.690 and 0.906 (still bad) 2008-Aug-10 00:42:21 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:42:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-10 00:42:21 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-10 00:42:21 LOG5 end_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2008-Aug-10 00:42:21 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-10 00:42:21 LOG5 end_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2008-Aug-10 00:42:21 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2008-Aug-10 00:42:21 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2008-Aug-10 00:42:21 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2008-Aug-10 00:42:21 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2008-Aug-10 00:42:21 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2008.61062 J 2008-Aug-10 00:42:21 LOG2 antvel: Computed apparent RA = 22:40:27.2 Dec = +16:01:48.3 2008-Aug-10 00:42:21 LOG2 antvel: Parameters to Doppler: Topocentric 16941 2008 223 0.0 2008-Aug-10 00:42:21 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-10 00:42:21 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2008-Aug-10 00:42:21 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2008-Aug-10 00:42:21 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-10 00:42:21 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-10 00:42:21 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Aug-10 00:42:21 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:42:21 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Aug-10 00:42:21 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-10 00:42:21 LOG5 begin_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2008-Aug-10 00:42:21 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 21.524602 2008.6106212449615 18.999933 2008-Aug-10 00:42:21 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666664 15.983333333333333 2008-Aug-10 00:42:21 LOG4 log_alfabeam: ALFABEAM 1 22.659307408405713 15.985455676612432 2008-Aug-10 00:42:21 LOG4 log_alfabeam: ALFABEAM 2 22.663189526554309 15.904942385020998 2008-Aug-10 00:42:21 LOG4 log_alfabeam: ALFABEAM 3 22.670546049761349 15.902432529592684 2008-Aug-10 00:42:21 LOG4 log_alfabeam: ALFABEAM 4 22.674027275884466 15.981367845120271 2008-Aug-10 00:42:21 LOG4 log_alfabeam: ALFABEAM 5 22.670121221839526 16.062136793433918 2008-Aug-10 00:42:21 LOG4 log_alfabeam: ALFABEAM 6 22.662758004541132 16.063714480470864 2008-Aug-10 00:42:21 INFO2 take_data: Starting WAPP+GALFA scan: 822300008 2008-Aug-10 00:42:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-10 00:42:22 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-10 00:42:22 LOG5 begin_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2008-Aug-10 00:42:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-10 00:42:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Aug-10 00:42:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:42:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:42:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:42:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16943.00 2008-Aug-10 00:42:23 INFO5 check_wapp_levels: WAPP power levels are between 0.690 and 0.906 (still bad) 2008-Aug-10 00:42:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-10 00:42:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:42:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:42:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:42:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:42:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:42:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:42:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:42:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:42:24 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:42:25 INFO5 check_wapp_levels: WAPP power levels are between 0.684 and 0.901 (still bad) 2008-Aug-10 00:42:25 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:42:26 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:42:27 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:42:27 INFO5 check_wapp_levels: WAPP power levels are between 0.684 and 0.901 (still bad) 2008-Aug-10 00:42:28 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:42:29 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:42:29 INFO5 check_wapp_levels: WAPP power levels are between 0.686 and 0.903 (still bad) 2008-Aug-10 00:42:30 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:42:31 INFO5 check_wapp_levels: WAPP power levels are between 0.684 and 0.901 (still bad) 2008-Aug-10 00:42:31 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:42:32 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:42:33 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:42:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-10 00:42:33 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-10 00:42:33 LOG5 end_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2008-Aug-10 00:42:33 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-10 00:42:33 LOG5 end_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2008-Aug-10 00:42:33 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2008-Aug-10 00:42:33 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2008-Aug-10 00:42:33 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2008-Aug-10 00:42:33 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2008-Aug-10 00:42:33 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2008.61062 J 2008-Aug-10 00:42:33 LOG2 antvel: Computed apparent RA = 22:40:27.2 Dec = +16:01:48.3 2008-Aug-10 00:42:33 LOG2 antvel: Parameters to Doppler: Topocentric 16953 2008 223 0.0 2008-Aug-10 00:42:33 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-10 00:42:33 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2008-Aug-10 00:42:33 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2008-Aug-10 00:42:33 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-10 00:42:33 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-10 00:42:33 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Aug-10 00:42:33 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:42:33 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Aug-10 00:42:33 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-10 00:42:33 LOG5 begin_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2008-Aug-10 00:42:33 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 21.527945 2008.6106216252185 18.999933 2008-Aug-10 00:42:33 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666664 15.983333333333336 2008-Aug-10 00:42:33 LOG4 log_alfabeam: ALFABEAM 1 22.659307450915939 15.985485186765265 2008-Aug-10 00:42:33 LOG4 log_alfabeam: ALFABEAM 2 22.663187993909556 15.904956823358978 2008-Aug-10 00:42:33 LOG4 log_alfabeam: ALFABEAM 3 22.670544467257802 15.902416386366854 2008-Aug-10 00:42:33 LOG4 log_alfabeam: ALFABEAM 4 22.674027239846875 15.981338974440559 2008-Aug-10 00:42:33 LOG4 log_alfabeam: ALFABEAM 5 22.670122686755402 16.062123730628720 2008-Aug-10 00:42:33 LOG4 log_alfabeam: ALFABEAM 6 22.662759498970210 16.063729215813293 2008-Aug-10 00:42:33 INFO2 take_data: Starting WAPP+GALFA scan: 822300009 2008-Aug-10 00:42:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-10 00:42:34 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-10 00:42:34 LOG5 begin_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2008-Aug-10 00:42:34 INFO5 check_wapp_levels: WAPP power levels are between 0.682 and 0.900 (still bad) 2008-Aug-10 00:42:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-10 00:42:34 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Aug-10 00:42:34 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:42:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:42:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:42:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16955.00 2008-Aug-10 00:42:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-10 00:42:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:42:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:42:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:42:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:42:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:42:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:42:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:42:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:42:36 INFO5 check_wapp_levels: WAPP power levels are between 0.681 and 0.899 (still bad) 2008-Aug-10 00:42:36 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:42:37 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:42:38 INFO5 check_wapp_levels: WAPP power levels are between 0.682 and 0.899 (still bad) 2008-Aug-10 00:42:38 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:42:39 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:42:40 INFO5 check_wapp_levels: WAPP power levels are between 0.681 and 0.901 (still bad) 2008-Aug-10 00:42:40 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:42:41 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:42:42 INFO5 check_wapp_levels: WAPP power levels are between 0.681 and 0.899 (still bad) 2008-Aug-10 00:42:42 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:42:43 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:42:44 INFO5 check_wapp_levels: WAPP power levels are between 0.681 and 0.898 (still bad) 2008-Aug-10 00:42:44 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:42:45 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:42:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-10 00:42:45 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-10 00:42:45 LOG5 end_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2008-Aug-10 00:42:45 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-10 00:42:45 LOG5 end_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2008-Aug-10 00:42:45 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2008-Aug-10 00:42:45 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2008-Aug-10 00:42:45 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2008-Aug-10 00:42:45 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2008-Aug-10 00:42:45 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2008.61062 J 2008-Aug-10 00:42:45 LOG2 antvel: Computed apparent RA = 22:40:27.2 Dec = +16:01:48.3 2008-Aug-10 00:42:45 LOG2 antvel: Parameters to Doppler: Topocentric 16965 2008 223 0.0 2008-Aug-10 00:42:45 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-10 00:42:45 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2008-Aug-10 00:42:45 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2008-Aug-10 00:42:45 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-10 00:42:45 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-10 00:42:45 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Aug-10 00:42:45 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:42:45 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Aug-10 00:42:45 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-10 00:42:45 LOG5 begin_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2008-Aug-10 00:42:45 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 21.531287 2008.6106220054758 18.999933 2008-Aug-10 00:42:45 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666661 15.983333333333336 2008-Aug-10 00:42:45 LOG4 log_alfabeam: ALFABEAM 1 22.659307494343253 15.985514937214573 2008-Aug-10 00:42:45 LOG4 log_alfabeam: ALFABEAM 2 22.663186449129999 15.904971384222650 2008-Aug-10 00:42:45 LOG4 log_alfabeam: ALFABEAM 3 22.670542871598535 15.902400119838713 2008-Aug-10 00:42:45 LOG4 log_alfabeam: ALFABEAM 4 22.674027202956463 15.981309866741304 2008-Aug-10 00:42:45 LOG4 log_alfabeam: ALFABEAM 5 22.670124163529433 16.062110553319492 2008-Aug-10 00:42:45 LOG4 log_alfabeam: ALFABEAM 6 22.662761006013021 16.063744068125640 2008-Aug-10 00:42:45 INFO2 take_data: Starting WAPP+GALFA scan: 822300010 2008-Aug-10 00:42:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-10 00:42:46 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-10 00:42:46 LOG5 begin_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2008-Aug-10 00:42:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-10 00:42:46 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Aug-10 00:42:46 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:42:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:42:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:42:46 INFO5 check_wapp_levels: WAPP power levels are between 0.681 and 0.899 (still bad) 2008-Aug-10 00:42:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16967.00 2008-Aug-10 00:42:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-10 00:42:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:42:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:42:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:42:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:42:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:42:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:42:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:42:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:42:48 INFO5 check_wapp_levels: WAPP power levels are between 0.682 and 0.899 (still bad) 2008-Aug-10 00:42:48 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:42:49 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:42:50 INFO5 check_wapp_levels: WAPP power levels are between 0.681 and 0.899 (still bad) 2008-Aug-10 00:42:50 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:42:51 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:42:52 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:42:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.680 < 0.75)! 2008-Aug-10 00:42:52 LOG4 check_wapp_levels: WAPP-1 power levels: 0.821 0.855 0.850 0.829 2008-Aug-10 00:42:52 LOG4 check_wapp_levels: WAPP-2 power levels: 0.734 0.739 0.709 0.779 2008-Aug-10 00:42:52 LOG4 check_wapp_levels: WAPP-3 power levels: 0.722 0.733 0.680 0.774 2008-Aug-10 00:42:52 LOG4 check_wapp_levels: WAPP-4 power levels: 0.709 0.810 0.797 0.900 2008-Aug-10 00:42:53 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:42:54 INFO5 check_wapp_levels: WAPP power levels are between 0.679 and 0.897 (still bad) 2008-Aug-10 00:42:54 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:42:55 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:42:56 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:42:56 INFO5 check_wapp_levels: WAPP power levels are between 0.679 and 0.898 (still bad) 2008-Aug-10 00:42:57 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:42:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-10 00:42:57 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-10 00:42:57 LOG5 end_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2008-Aug-10 00:42:57 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-10 00:42:57 LOG5 end_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2008-Aug-10 00:42:57 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2008-Aug-10 00:42:57 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2008-Aug-10 00:42:57 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2008-Aug-10 00:42:57 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2008-Aug-10 00:42:57 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2008.61062 J 2008-Aug-10 00:42:57 LOG2 antvel: Computed apparent RA = 22:40:27.2 Dec = +16:01:48.3 2008-Aug-10 00:42:57 LOG2 antvel: Parameters to Doppler: Topocentric 16977 2008 223 0.0 2008-Aug-10 00:42:57 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-10 00:42:57 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2008-Aug-10 00:42:57 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2008-Aug-10 00:42:57 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-10 00:42:57 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-10 00:42:57 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Aug-10 00:42:57 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:42:57 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Aug-10 00:42:57 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-10 00:42:57 LOG5 begin_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2008-Aug-10 00:42:57 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 21.534630 2008.6106223857328 18.999933 2008-Aug-10 00:42:57 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666668 15.983333333333340 2008-Aug-10 00:42:57 LOG4 log_alfabeam: ALFABEAM 1 22.659307538731309 15.985544947875121 2008-Aug-10 00:42:57 LOG4 log_alfabeam: ALFABEAM 2 22.663184891189193 15.904986077508067 2008-Aug-10 00:42:57 LOG4 log_alfabeam: ALFABEAM 3 22.670541261707573 15.902383719296298 2008-Aug-10 00:42:57 LOG4 log_alfabeam: ALFABEAM 4 22.674027165174351 15.981280502520947 2008-Aug-10 00:42:57 LOG4 log_alfabeam: ALFABEAM 5 22.670125653145515 16.062097252516295 2008-Aug-10 00:42:57 LOG4 log_alfabeam: ALFABEAM 6 22.662762526687033 16.063759047225382 2008-Aug-10 00:42:57 INFO2 take_data: Starting WAPP+GALFA scan: 822300011 2008-Aug-10 00:42:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-10 00:42:58 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-10 00:42:58 LOG5 begin_task: Level: (4) ID = <10088> Status = 0 0 0 0 ok 2008-Aug-10 00:42:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-10 00:42:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Aug-10 00:42:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:42:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:42:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:42:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16979.00 2008-Aug-10 00:42:59 INFO5 check_wapp_levels: WAPP power levels are between 0.679 and 0.898 (still bad) 2008-Aug-10 00:43:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-10 00:43:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:43:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:43:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:43:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:43:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:43:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:43:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:43:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:43:00 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:43:01 INFO5 check_wapp_levels: WAPP power levels are between 0.680 and 0.901 (still bad) 2008-Aug-10 00:43:01 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:43:02 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:43:03 INFO5 check_wapp_levels: WAPP power levels are between 0.680 and 0.901 (still bad) 2008-Aug-10 00:43:03 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:43:04 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:43:05 INFO5 check_wapp_levels: WAPP power levels are between 0.680 and 0.900 (still bad) 2008-Aug-10 00:43:05 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:43:06 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:43:07 INFO5 check_wapp_levels: WAPP power levels are between 0.678 and 0.897 (still bad) 2008-Aug-10 00:43:07 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:43:08 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:43:09 INFO5 check_wapp_levels: WAPP power levels are between 0.678 and 0.899 (still bad) 2008-Aug-10 00:43:09 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:43:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-10 00:43:09 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-10 00:43:09 LOG5 end_task: Level: (4) ID = <10088> Status = 0 0 0 0 ok 2008-Aug-10 00:43:09 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-10 00:43:09 LOG5 end_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2008-Aug-10 00:43:09 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2008-Aug-10 00:43:09 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Aug-10 00:43:09 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Aug-10 00:43:09 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-10 00:43:09 LOG5 begin_task: Level: (3) ID = <10089> Status = 0 0 0 0 ok 2008-Aug-10 00:43:09 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-10 00:43:09 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Aug-10 00:43:09 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-10 00:43:09 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-10 00:43:09 LOG5 end_task: Level: (3) ID = <10089> Status = 0 0 0 0 ok 2008-Aug-10 00:43:09 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2008-Aug-10 00:43:09 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2008-Aug-10 00:43:09 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2008-Aug-10 00:43:09 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2008-Aug-10 00:43:09 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2008.61062 J 2008-Aug-10 00:43:09 LOG2 antvel: Computed apparent RA = 22:40:27.2 Dec = +16:01:48.3 2008-Aug-10 00:43:09 LOG2 antvel: Parameters to Doppler: Topocentric 16989 2008 223 0.0 2008-Aug-10 00:43:09 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-10 00:43:09 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2008-Aug-10 00:43:09 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2008-Aug-10 00:43:09 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-10 00:43:09 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-10 00:43:09 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Aug-10 00:43:09 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:43:09 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Aug-10 00:43:09 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-10 00:43:09 LOG5 begin_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2008-Aug-10 00:43:09 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 21.537972 2008.6106227659898 18.999933 2008-Aug-10 00:43:09 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666661 15.983333333333333 2008-Aug-10 00:43:09 LOG4 log_alfabeam: ALFABEAM 1 22.659307584071495 15.985575202926443 2008-Aug-10 00:43:09 LOG4 log_alfabeam: ALFABEAM 2 22.663183320916151 15.905000895621338 2008-Aug-10 00:43:09 LOG4 log_alfabeam: ALFABEAM 3 22.670539638425598 15.902367193564874 2008-Aug-10 00:43:09 LOG4 log_alfabeam: ALFABEAM 4 22.674027126506072 15.981250897242109 2008-Aug-10 00:43:09 LOG4 log_alfabeam: ALFABEAM 5 22.670127154813674 16.062083835059113 2008-Aug-10 00:43:09 LOG4 log_alfabeam: ALFABEAM 6 22.662764060199379 16.063774145089113 2008-Aug-10 00:43:09 INFO2 take_data: Starting WAPP+GALFA scan: 822300012 2008-Aug-10 00:43:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-10 00:43:10 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-10 00:43:10 LOG5 begin_task: Level: (4) ID = <10091> Status = 0 0 0 0 ok 2008-Aug-10 00:43:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-10 00:43:10 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Aug-10 00:43:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:43:10 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Aug-10 00:43:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16991.00 2008-Aug-10 00:43:11 INFO5 check_wapp_levels: WAPP power levels are between 0.678 and 0.900 (still bad) 2008-Aug-10 00:43:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-10 00:43:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:43:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:43:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:43:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:43:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:43:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:43:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:43:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:43:12 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:43:13 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.997 and 1.260 2008-Aug-10 00:43:13 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:43:14 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:43:15 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:43:16 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:43:17 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:43:18 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:43:19 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:43:20 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:43:21 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:43:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-10 00:43:21 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-10 00:43:21 LOG5 end_task: Level: (4) ID = <10091> Status = 0 0 0 0 ok 2008-Aug-10 00:43:21 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-10 00:43:21 LOG5 end_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2008-Aug-10 00:43:21 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2008-Aug-10 00:43:21 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2008-Aug-10 00:43:21 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2008-Aug-10 00:43:21 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2008-Aug-10 00:43:21 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2008.61062 J 2008-Aug-10 00:43:21 LOG2 antvel: Computed apparent RA = 22:40:27.2 Dec = +16:01:48.3 2008-Aug-10 00:43:21 LOG2 antvel: Parameters to Doppler: Topocentric 17001 2008 223 0.0 2008-Aug-10 00:43:21 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-10 00:43:21 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2008-Aug-10 00:43:21 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2008-Aug-10 00:43:21 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-10 00:43:21 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-10 00:43:21 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Aug-10 00:43:21 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:43:21 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Aug-10 00:43:21 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-10 00:43:21 LOG5 begin_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2008-Aug-10 00:43:21 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 21.541315 2008.6106231462468 18.999933 2008-Aug-10 00:43:21 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666664 15.983333333333333 2008-Aug-10 00:43:21 LOG4 log_alfabeam: ALFABEAM 1 22.659307630409288 15.985605722633577 2008-Aug-10 00:43:21 LOG4 log_alfabeam: ALFABEAM 2 22.663181737266942 15.905015848642277 2008-Aug-10 00:43:21 LOG4 log_alfabeam: ALFABEAM 3 22.670538000657185 15.902350531757889 2008-Aug-10 00:43:21 LOG4 log_alfabeam: ALFABEAM 4 22.674027086911071 15.981221031057846 2008-Aug-10 00:43:21 LOG4 log_alfabeam: ALFABEAM 5 22.670128669534876 16.062070291786430 2008-Aug-10 00:43:21 LOG4 log_alfabeam: ALFABEAM 6 22.662765607586142 16.063789371699880 2008-Aug-10 00:43:21 INFO2 take_data: Starting WAPP+GALFA scan: 822300013 2008-Aug-10 00:43:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-10 00:43:22 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-10 00:43:22 LOG5 begin_task: Level: (4) ID = <10093> Status = 0 0 0 0 ok 2008-Aug-10 00:43:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-10 00:43:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Aug-10 00:43:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:43:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:43:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:43:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17003.00 2008-Aug-10 00:43:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-10 00:43:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:43:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:43:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:43:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:43:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:43:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:43:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:43:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:43:24 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:43:25 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:43:26 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:43:27 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:43:28 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:43:29 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:43:30 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:43:31 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:43:32 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:43:33 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:43:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-10 00:43:33 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-10 00:43:33 LOG5 end_task: Level: (4) ID = <10093> Status = 0 0 0 0 ok 2008-Aug-10 00:43:33 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-10 00:43:33 LOG5 end_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2008-Aug-10 00:43:33 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2008-Aug-10 00:43:33 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2008-Aug-10 00:43:33 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2008-Aug-10 00:43:33 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2008-Aug-10 00:43:33 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2008.61062 J 2008-Aug-10 00:43:33 LOG2 antvel: Computed apparent RA = 22:40:27.2 Dec = +16:01:48.3 2008-Aug-10 00:43:33 LOG2 antvel: Parameters to Doppler: Topocentric 17013 2008 223 0.0 2008-Aug-10 00:43:33 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-10 00:43:33 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2008-Aug-10 00:43:33 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2008-Aug-10 00:43:33 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-10 00:43:33 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-10 00:43:33 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Aug-10 00:43:33 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:43:33 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Aug-10 00:43:33 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-10 00:43:33 LOG5 begin_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2008-Aug-10 00:43:33 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 21.544657 2008.6106235265038 18.999933 2008-Aug-10 00:43:33 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666668 15.983333333333329 2008-Aug-10 00:43:33 LOG4 log_alfabeam: ALFABEAM 1 22.659307677735580 15.985636490920394 2008-Aug-10 00:43:33 LOG4 log_alfabeam: ALFABEAM 2 22.663180141083743 15.905030928851756 2008-Aug-10 00:43:33 LOG4 log_alfabeam: ALFABEAM 3 22.670536349256764 15.902333742837147 2008-Aug-10 00:43:33 LOG4 log_alfabeam: ALFABEAM 4 22.674027046395306 15.981190919682827 2008-Aug-10 00:43:33 LOG4 log_alfabeam: ALFABEAM 5 22.670130196506335 16.062056629655043 2008-Aug-10 00:43:33 LOG4 log_alfabeam: ALFABEAM 6 22.662767168041299 16.063804718905104 2008-Aug-10 00:43:33 INFO2 take_data: Starting WAPP+GALFA scan: 822300014 2008-Aug-10 00:43:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-10 00:43:34 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-10 00:43:34 LOG5 begin_task: Level: (4) ID = <10095> Status = 0 0 0 0 ok 2008-Aug-10 00:43:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-10 00:43:34 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Aug-10 00:43:34 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:43:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:43:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:43:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17015.00 2008-Aug-10 00:43:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-10 00:43:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:43:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:43:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:43:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:43:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:43:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:43:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:43:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:43:36 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:43:37 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:43:38 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:43:39 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:43:40 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:43:41 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:43:42 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:43:43 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:43:44 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:43:45 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:43:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-10 00:43:45 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-10 00:43:45 LOG5 end_task: Level: (4) ID = <10095> Status = 0 0 0 0 ok 2008-Aug-10 00:43:45 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-10 00:43:45 LOG5 end_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2008-Aug-10 00:43:45 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2008-Aug-10 00:43:45 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2008-Aug-10 00:43:45 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2008-Aug-10 00:43:45 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2008-Aug-10 00:43:45 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2008.61062 J 2008-Aug-10 00:43:45 LOG2 antvel: Computed apparent RA = 22:40:27.2 Dec = +16:01:48.3 2008-Aug-10 00:43:45 LOG2 antvel: Parameters to Doppler: Topocentric 17025 2008 223 0.0 2008-Aug-10 00:43:45 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-10 00:43:45 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2008-Aug-10 00:43:45 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2008-Aug-10 00:43:45 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-10 00:43:45 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-10 00:43:45 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Aug-10 00:43:45 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:43:45 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Aug-10 00:43:45 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-10 00:43:45 LOG5 begin_task: Level: (3) ID = <10096> Status = 0 0 0 0 ok 2008-Aug-10 00:43:45 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 21.548000 2008.610623906761 18.999933 2008-Aug-10 00:43:45 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666668 15.983333333333340 2008-Aug-10 00:43:45 LOG4 log_alfabeam: ALFABEAM 1 22.659307726097694 15.985667528408635 2008-Aug-10 00:43:45 LOG4 log_alfabeam: ALFABEAM 2 22.663178531304844 15.905046146517185 2008-Aug-10 00:43:45 LOG4 log_alfabeam: ALFABEAM 3 22.670534683109089 15.902316815738601 2008-Aug-10 00:43:45 LOG4 log_alfabeam: ALFABEAM 4 22.674027004916471 15.981160542918291 2008-Aug-10 00:43:45 LOG4 log_alfabeam: ALFABEAM 5 22.670131736746416 16.062042839328253 2008-Aug-10 00:43:45 LOG4 log_alfabeam: ALFABEAM 6 22.662768742619889 16.063820196856209 2008-Aug-10 00:43:45 INFO2 take_data: Starting WAPP+GALFA scan: 822300015 2008-Aug-10 00:43:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-10 00:43:46 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-10 00:43:46 LOG5 begin_task: Level: (4) ID = <10097> Status = 0 0 0 0 ok 2008-Aug-10 00:43:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-10 00:43:46 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Aug-10 00:43:46 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:43:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:43:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:43:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17027.00 2008-Aug-10 00:43:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-10 00:43:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:43:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:43:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:43:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:43:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:43:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:43:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:43:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:43:48 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:43:49 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:43:50 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:43:51 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:43:52 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:43:53 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:43:54 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:43:55 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:43:56 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:43:57 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:43:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-10 00:43:57 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-10 00:43:57 LOG5 end_task: Level: (4) ID = <10097> Status = 0 0 0 0 ok 2008-Aug-10 00:43:57 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-10 00:43:57 LOG5 end_task: Level: (3) ID = <10096> Status = 0 0 0 0 ok 2008-Aug-10 00:43:57 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2008-Aug-10 00:43:57 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2008-Aug-10 00:43:57 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2008-Aug-10 00:43:57 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2008-Aug-10 00:43:57 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2008.61062 J 2008-Aug-10 00:43:57 LOG2 antvel: Computed apparent RA = 22:40:27.2 Dec = +16:01:48.3 2008-Aug-10 00:43:57 LOG2 antvel: Parameters to Doppler: Topocentric 17037 2008 223 0.0 2008-Aug-10 00:43:57 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-10 00:43:57 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2008-Aug-10 00:43:57 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2008-Aug-10 00:43:57 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-10 00:43:57 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-10 00:43:57 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Aug-10 00:43:57 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:43:57 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Aug-10 00:43:57 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-10 00:43:57 LOG5 begin_task: Level: (3) ID = <10098> Status = 0 0 0 0 ok 2008-Aug-10 00:43:57 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 21.551342 2008.610624287018 18.999933 2008-Aug-10 00:43:57 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666661 15.983333333333340 2008-Aug-10 00:43:57 LOG4 log_alfabeam: ALFABEAM 1 22.659307775486020 15.985698818762696 2008-Aug-10 00:43:57 LOG4 log_alfabeam: ALFABEAM 2 22.663176908785736 15.905061493792271 2008-Aug-10 00:43:57 LOG4 log_alfabeam: ALFABEAM 3 22.670533003082493 15.902299759562563 2008-Aug-10 00:43:57 LOG4 log_alfabeam: ALFABEAM 4 22.674026962480976 15.981129916734687 2008-Aug-10 00:43:57 LOG4 log_alfabeam: ALFABEAM 5 22.670133289439324 16.062028927881450 2008-Aug-10 00:43:57 LOG4 log_alfabeam: ALFABEAM 6 22.662770330502507 16.063835797269508 2008-Aug-10 00:43:57 INFO2 take_data: Starting WAPP+GALFA scan: 822300016 2008-Aug-10 00:43:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-10 00:43:58 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-10 00:43:58 LOG5 begin_task: Level: (4) ID = <10099> Status = 0 0 0 0 ok 2008-Aug-10 00:43:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-10 00:43:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Aug-10 00:43:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:43:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:43:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:43:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17039.00 2008-Aug-10 00:44:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-10 00:44:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:44:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:44:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:44:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:44:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:44:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:44:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:44:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:44:00 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:44:01 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:44:02 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:44:03 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:44:04 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:44:05 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:44:06 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:44:07 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:44:08 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:44:09 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:44:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-10 00:44:09 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-10 00:44:09 LOG5 end_task: Level: (4) ID = <10099> Status = 0 0 0 0 ok 2008-Aug-10 00:44:09 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-10 00:44:09 LOG5 end_task: Level: (3) ID = <10098> Status = 0 0 0 0 ok 2008-Aug-10 00:44:09 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2008-Aug-10 00:44:09 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2008-Aug-10 00:44:09 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2008-Aug-10 00:44:09 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2008-Aug-10 00:44:09 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2008.61062 J 2008-Aug-10 00:44:09 LOG2 antvel: Computed apparent RA = 22:40:27.2 Dec = +16:01:48.3 2008-Aug-10 00:44:09 LOG2 antvel: Parameters to Doppler: Topocentric 17049 2008 223 0.0 2008-Aug-10 00:44:09 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-10 00:44:09 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2008-Aug-10 00:44:09 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2008-Aug-10 00:44:09 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-10 00:44:09 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-10 00:44:09 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Aug-10 00:44:09 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:44:09 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Aug-10 00:44:09 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-10 00:44:09 LOG5 begin_task: Level: (3) ID = <10100> Status = 0 0 0 0 ok 2008-Aug-10 00:44:09 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 21.554684 2008.610624667275 18.999933 2008-Aug-10 00:44:09 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666661 15.983333333333336 2008-Aug-10 00:44:09 LOG4 log_alfabeam: ALFABEAM 1 22.659307825934579 15.985730373486074 2008-Aug-10 00:44:09 LOG4 log_alfabeam: ALFABEAM 2 22.663175272938140 15.905076976482754 2008-Aug-10 00:44:09 LOG4 log_alfabeam: ALFABEAM 3 22.670531308550768 15.902282568228925 2008-Aug-10 00:44:09 LOG4 log_alfabeam: ALFABEAM 4 22.674026919057841 15.981099029856114 2008-Aug-10 00:44:09 LOG4 log_alfabeam: ALFABEAM 5 22.670134855150682 16.062014890018546 2008-Aug-10 00:44:09 LOG4 log_alfabeam: ALFABEAM 6 22.662771932282197 16.063851525741988 2008-Aug-10 00:44:09 INFO2 take_data: Starting WAPP+GALFA scan: 822300017 2008-Aug-10 00:44:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-10 00:44:10 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-10 00:44:10 LOG5 begin_task: Level: (4) ID = <10101> Status = 0 0 0 0 ok 2008-Aug-10 00:44:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-10 00:44:10 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Aug-10 00:44:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:44:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:44:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:44:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17051.00 2008-Aug-10 00:44:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-10 00:44:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:44:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:44:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:44:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:44:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:44:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:44:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:44:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:44:12 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:44:13 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:44:14 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:44:15 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:44:16 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:44:17 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:44:18 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:44:19 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:44:20 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:44:21 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:44:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-10 00:44:21 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-10 00:44:21 LOG5 end_task: Level: (4) ID = <10101> Status = 0 0 0 0 ok 2008-Aug-10 00:44:21 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-10 00:44:21 LOG5 end_task: Level: (3) ID = <10100> Status = 0 0 0 0 ok 2008-Aug-10 00:44:21 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2008-Aug-10 00:44:21 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2008-Aug-10 00:44:21 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2008-Aug-10 00:44:21 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2008-Aug-10 00:44:21 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2008.61063 J 2008-Aug-10 00:44:21 LOG2 antvel: Computed apparent RA = 22:40:27.2 Dec = +16:01:48.3 2008-Aug-10 00:44:21 LOG2 antvel: Parameters to Doppler: Topocentric 17061 2008 223 0.0 2008-Aug-10 00:44:21 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-10 00:44:21 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2008-Aug-10 00:44:21 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2008-Aug-10 00:44:21 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-10 00:44:21 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-10 00:44:21 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Aug-10 00:44:21 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:44:21 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Aug-10 00:44:21 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-10 00:44:21 LOG5 begin_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2008-Aug-10 00:44:21 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 21.558027 2008.610625047532 18.999933 2008-Aug-10 00:44:21 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666661 15.983333333333327 2008-Aug-10 00:44:21 LOG4 log_alfabeam: ALFABEAM 1 22.659307877478998 15.985762204424802 2008-Aug-10 00:44:21 LOG4 log_alfabeam: ALFABEAM 2 22.663173623156606 15.905092600572649 2008-Aug-10 00:44:21 LOG4 log_alfabeam: ALFABEAM 3 22.670529598868729 15.902265235485384 2008-Aug-10 00:44:21 LOG4 log_alfabeam: ALFABEAM 4 22.674026874614523 15.981067870668848 2008-Aug-10 00:44:21 LOG4 log_alfabeam: ALFABEAM 5 22.670136434462851 16.062000720277069 2008-Aug-10 00:44:21 LOG4 log_alfabeam: ALFABEAM 6 22.662773548570105 16.063867388033845 2008-Aug-10 00:44:21 INFO2 take_data: Starting WAPP+GALFA scan: 822300018 2008-Aug-10 00:44:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-10 00:44:22 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-10 00:44:22 LOG5 begin_task: Level: (4) ID = <10103> Status = 0 0 0 0 ok 2008-Aug-10 00:44:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-10 00:44:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Aug-10 00:44:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:44:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:44:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:44:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17063.00 2008-Aug-10 00:44:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-10 00:44:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:44:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:44:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:44:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:44:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:44:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:44:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:44:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:44:24 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:44:25 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:44:26 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:44:27 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:44:28 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:44:29 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:44:30 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:44:31 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:44:32 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:44:33 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:44:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-10 00:44:33 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-10 00:44:33 LOG5 end_task: Level: (4) ID = <10103> Status = 0 0 0 0 ok 2008-Aug-10 00:44:33 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-10 00:44:33 LOG5 end_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2008-Aug-10 00:44:33 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2008-Aug-10 00:44:33 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2008-Aug-10 00:44:33 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2008-Aug-10 00:44:33 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Aug-10 00:44:33 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Aug-10 00:44:33 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-10 00:44:33 LOG5 begin_task: Level: (3) ID = <10104> Status = 0 0 0 0 ok 2008-Aug-10 00:44:33 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-10 00:44:33 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-10 00:44:33 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-10 00:44:33 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-10 00:44:33 LOG5 end_task: Level: (3) ID = <10104> Status = 0 0 0 0 ok 2008-Aug-10 00:44:33 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2008-Aug-10 00:44:33 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2008-Aug-10 00:44:33 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2008-Aug-10 00:44:33 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2008-Aug-10 00:44:33 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2008-Aug-10 00:44:33 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2008.61063 J 2008-Aug-10 00:44:33 LOG2 antvel: Computed apparent RA = 22:40:27.2 Dec = +16:01:48.3 2008-Aug-10 00:44:33 LOG2 antvel: Parameters to Doppler: Topocentric 17073 2008 223 0.0 2008-Aug-10 00:44:33 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-10 00:44:33 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2008-Aug-10 00:44:33 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2008-Aug-10 00:44:33 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-10 00:44:33 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-10 00:44:33 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Aug-10 00:44:33 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:44:33 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Aug-10 00:44:33 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-10 00:44:33 LOG5 begin_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2008-Aug-10 00:44:33 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 21.561369 2008.610625427789 18.999933 2008-Aug-10 00:44:33 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666664 15.983333333333336 2008-Aug-10 00:44:33 LOG4 log_alfabeam: ALFABEAM 1 22.659307930108870 15.985794294846704 2008-Aug-10 00:44:33 LOG4 log_alfabeam: ALFABEAM 2 22.663171960317001 15.905108358021121 2008-Aug-10 00:44:33 LOG4 log_alfabeam: ALFABEAM 3 22.670527874926041 15.902247770643701 2008-Aug-10 00:44:33 LOG4 log_alfabeam: ALFABEAM 4 22.674026829158162 15.981036455534392 2008-Aug-10 00:44:33 LOG4 log_alfabeam: ALFABEAM 5 22.670138026540194 16.061986425913897 2008-Aug-10 00:44:33 LOG4 log_alfabeam: ALFABEAM 6 22.662775178526388 16.063883375661405 2008-Aug-10 00:44:33 INFO2 take_data: Starting WAPP+GALFA scan: 822300019 2008-Aug-10 00:44:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-10 00:44:34 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-10 00:44:34 LOG5 begin_task: Level: (4) ID = <10106> Status = 0 0 0 0 ok 2008-Aug-10 00:44:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-10 00:44:34 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Aug-10 00:44:34 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:44:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:44:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:44:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17075.00 2008-Aug-10 00:44:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-10 00:44:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:44:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:44:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:44:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:44:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:44:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:44:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:44:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:44:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.722 < 0.75)! 2008-Aug-10 00:44:36 LOG4 check_wapp_levels: WAPP-1 power levels: 0.853 0.876 0.896 0.847 2008-Aug-10 00:44:36 LOG4 check_wapp_levels: WAPP-2 power levels: 0.742 0.756 0.749 0.793 2008-Aug-10 00:44:36 LOG4 check_wapp_levels: WAPP-3 power levels: 0.745 0.742 0.722 0.803 2008-Aug-10 00:44:36 LOG4 check_wapp_levels: WAPP-4 power levels: 0.729 0.832 0.821 0.924 2008-Aug-10 00:44:36 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:44:37 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:44:38 INFO5 check_wapp_levels: WAPP power levels are between 0.721 and 0.919 (still bad) 2008-Aug-10 00:44:38 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:44:39 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:44:40 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:44:40 INFO5 check_wapp_levels: WAPP power levels are between 0.722 and 0.921 (still bad) 2008-Aug-10 00:44:41 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:44:42 INFO5 check_wapp_levels: WAPP power levels are between 0.720 and 0.919 (still bad) 2008-Aug-10 00:44:42 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:44:43 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:44:44 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:44:44 INFO5 check_wapp_levels: WAPP power levels are between 0.720 and 0.918 (still bad) 2008-Aug-10 00:44:45 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:44:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-10 00:44:45 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-10 00:44:45 LOG5 end_task: Level: (4) ID = <10106> Status = 0 0 0 0 ok 2008-Aug-10 00:44:45 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-10 00:44:45 LOG5 end_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2008-Aug-10 00:44:45 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2008-Aug-10 00:44:45 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2008-Aug-10 00:44:45 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2008-Aug-10 00:44:45 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2008-Aug-10 00:44:45 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2008.61063 J 2008-Aug-10 00:44:45 LOG2 antvel: Computed apparent RA = 22:40:27.2 Dec = +16:01:48.3 2008-Aug-10 00:44:45 LOG2 antvel: Parameters to Doppler: Topocentric 17085 2008 223 0.0 2008-Aug-10 00:44:45 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-10 00:44:45 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2008-Aug-10 00:44:45 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2008-Aug-10 00:44:45 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-10 00:44:45 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-10 00:44:45 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Aug-10 00:44:45 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:44:45 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Aug-10 00:44:45 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-10 00:44:45 LOG5 begin_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2008-Aug-10 00:44:45 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 21.564712 2008.6106258080463 18.999933 2008-Aug-10 00:44:45 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666664 15.983333333333343 2008-Aug-10 00:44:45 LOG4 log_alfabeam: ALFABEAM 1 22.659307983876516 15.985826666295035 2008-Aug-10 00:44:45 LOG4 log_alfabeam: ALFABEAM 2 22.663170283311789 15.905124259581934 2008-Aug-10 00:44:45 LOG4 log_alfabeam: ALFABEAM 3 22.670526135556166 15.902230162183260 2008-Aug-10 00:44:45 LOG4 log_alfabeam: ALFABEAM 4 22.674026782641750 15.981004763345096 2008-Aug-10 00:44:45 LOG4 log_alfabeam: ALFABEAM 5 22.670139632445917 16.061971997138087 2008-Aug-10 00:44:45 LOG4 log_alfabeam: ALFABEAM 6 22.662776823255200 16.063899499209160 2008-Aug-10 00:44:45 INFO2 take_data: Starting WAPP+GALFA scan: 822300020 2008-Aug-10 00:44:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-10 00:44:46 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-10 00:44:46 LOG5 begin_task: Level: (4) ID = <10108> Status = 0 0 0 0 ok 2008-Aug-10 00:44:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-10 00:44:46 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Aug-10 00:44:46 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:44:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:44:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:44:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17087.00 2008-Aug-10 00:44:47 INFO5 check_wapp_levels: WAPP power levels are between 0.720 and 0.919 (still bad) 2008-Aug-10 00:44:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-10 00:44:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:44:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:44:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:44:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:44:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:44:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:44:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:44:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:44:48 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:44:49 INFO5 check_wapp_levels: WAPP power levels are between 0.676 and 0.897 (still bad) 2008-Aug-10 00:44:49 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:44:50 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:44:51 INFO5 check_wapp_levels: WAPP power levels are between 0.674 and 0.894 (still bad) 2008-Aug-10 00:44:51 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:44:52 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:44:53 INFO5 check_wapp_levels: WAPP power levels are between 0.678 and 0.899 (still bad) 2008-Aug-10 00:44:53 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:44:54 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:44:55 INFO5 check_wapp_levels: WAPP power levels are between 0.675 and 0.895 (still bad) 2008-Aug-10 00:44:55 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:44:56 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:44:57 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:44:57 INFO5 check_wapp_levels: WAPP power levels are between 0.673 and 0.895 (still bad) 2008-Aug-10 00:44:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-10 00:44:57 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-10 00:44:57 LOG5 end_task: Level: (4) ID = <10108> Status = 0 0 0 0 ok 2008-Aug-10 00:44:57 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-10 00:44:57 LOG5 end_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2008-Aug-10 00:44:57 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2008-Aug-10 00:44:57 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2008-Aug-10 00:44:57 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2008-Aug-10 00:44:57 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2008-Aug-10 00:44:57 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2008.61063 J 2008-Aug-10 00:44:57 LOG2 antvel: Computed apparent RA = 22:40:27.2 Dec = +16:01:48.3 2008-Aug-10 00:44:57 LOG2 antvel: Parameters to Doppler: Topocentric 17097 2008 223 0.0 2008-Aug-10 00:44:57 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-10 00:44:57 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2008-Aug-10 00:44:57 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2008-Aug-10 00:44:57 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-10 00:44:57 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-10 00:44:57 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Aug-10 00:44:57 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:44:57 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Aug-10 00:44:57 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-10 00:44:57 LOG5 begin_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2008-Aug-10 00:44:57 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 21.568054 2008.6106261883033 18.999933 2008-Aug-10 00:44:57 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666661 15.983333333333345 2008-Aug-10 00:44:57 LOG4 log_alfabeam: ALFABEAM 1 22.659308038770980 15.985859301768180 2008-Aug-10 00:44:57 LOG4 log_alfabeam: ALFABEAM 2 22.663168593030687 15.905140297081905 2008-Aug-10 00:44:57 LOG4 log_alfabeam: ALFABEAM 3 22.670524381663252 15.902212419559252 2008-Aug-10 00:44:57 LOG4 log_alfabeam: ALFABEAM 4 22.674026735072921 15.980972810728009 2008-Aug-10 00:44:57 LOG4 log_alfabeam: ALFABEAM 5 22.670141251330893 16.061957441329969 2008-Aug-10 00:44:57 LOG4 log_alfabeam: ALFABEAM 6 22.662778481902805 16.063915750057692 2008-Aug-10 00:44:57 INFO2 take_data: Starting WAPP+GALFA scan: 822300021 2008-Aug-10 00:44:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-10 00:44:58 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-10 00:44:58 LOG5 begin_task: Level: (4) ID = <10110> Status = 0 0 0 0 ok 2008-Aug-10 00:44:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-10 00:44:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Aug-10 00:44:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:44:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:44:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:44:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17099.00 2008-Aug-10 00:44:59 INFO5 check_wapp_levels: WAPP power levels are between 0.677 and 0.897 (still bad) 2008-Aug-10 00:45:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-10 00:45:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:45:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:45:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:45:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:45:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:45:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:45:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:45:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:45:00 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:45:01 INFO5 check_wapp_levels: WAPP power levels are between 0.675 and 0.898 (still bad) 2008-Aug-10 00:45:01 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:45:02 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:45:03 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:45:03 INFO5 check_wapp_levels: WAPP power levels are between 0.673 and 0.895 (still bad) 2008-Aug-10 00:45:04 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:45:05 INFO5 check_wapp_levels: WAPP power levels are between 0.674 and 0.896 (still bad) 2008-Aug-10 00:45:05 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:45:06 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:45:07 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:45:07 INFO5 check_wapp_levels: WAPP power levels are between 0.672 and 0.894 (still bad) 2008-Aug-10 00:45:08 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:45:09 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 00:45:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-10 00:45:09 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-10 00:45:09 LOG5 end_task: Level: (4) ID = <10110> Status = 0 0 0 0 ok 2008-Aug-10 00:45:09 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-10 00:45:09 LOG5 end_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2008-Aug-10 00:45:09 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2008-Aug-10 00:45:09 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2008-Aug-10 00:45:09 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2008-Aug-10 00:45:09 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2008-Aug-10 00:45:09 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2008.61063 J 2008-Aug-10 00:45:09 LOG2 antvel: Computed apparent RA = 22:40:27.2 Dec = +16:01:48.3 2008-Aug-10 00:45:09 LOG2 antvel: Parameters to Doppler: Topocentric 17109 2008 223 0.0 2008-Aug-10 00:45:09 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-10 00:45:09 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2008-Aug-10 00:45:09 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2008-Aug-10 00:45:09 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-10 00:45:12 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-10 00:45:12 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Aug-10 00:45:12 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:45:12 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Aug-10 00:45:12 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-10 00:45:12 LOG5 begin_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2008-Aug-10 00:45:12 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 21.571397 2008.6106265685603 18.999933 2008-Aug-10 00:45:12 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666668 15.983333333333340 2008-Aug-10 00:45:12 LOG4 log_alfabeam: ALFABEAM 1 22.659308094846693 15.985892223190346 2008-Aug-10 00:45:12 LOG4 log_alfabeam: ALFABEAM 2 22.663166888347249 15.905156481476592 2008-Aug-10 00:45:12 LOG4 log_alfabeam: ALFABEAM 3 22.670522612059496 15.902194531063085 2008-Aug-10 00:45:12 LOG4 log_alfabeam: ALFABEAM 4 22.674026686402637 15.980940576199821 2008-Aug-10 00:45:12 LOG4 log_alfabeam: ALFABEAM 5 22.670142884276842 16.061942748510123 2008-Aug-10 00:45:12 LOG4 log_alfabeam: ALFABEAM 6 22.662780155593683 16.063932138969822 2008-Aug-10 00:45:12 INFO2 take_data: Starting WAPP+GALFA scan: 822300022 2008-Aug-10 00:45:13 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-10 00:45:13 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-10 00:45:13 LOG5 begin_task: Level: (4) ID = <10112> Status = 0 0 0 0 ok 2008-Aug-10 00:45:13 INFO5 check_wapp_levels: WAPP power levels are between 0.671 and 0.894 (still bad) 2008-Aug-10 00:45:13 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-10 00:45:13 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Aug-10 00:45:13 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:45:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:45:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:45:13 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17114.00 2008-Aug-10 00:45:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-10 00:45:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:45:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:45:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:45:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:45:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:45:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:45:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:45:15 INFO5 check_wapp_levels: WAPP power levels are between 0.671 and 0.895 (still bad) 2008-Aug-10 00:45:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:45:17 INFO5 check_wapp_levels: WAPP power levels are between 0.667 and 0.890 (still bad) 2008-Aug-10 00:45:19 INFO5 check_wapp_levels: WAPP power levels are between 0.665 and 0.889 (still bad) 2008-Aug-10 00:45:21 INFO5 check_wapp_levels: WAPP power levels are between 0.664 and 0.888 (still bad) 2008-Aug-10 00:45:23 INFO5 check_wapp_levels: WAPP power levels are between 0.669 and 0.890 (still bad) 2008-Aug-10 00:45:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-10 00:45:24 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-10 00:45:24 LOG5 end_task: Level: (4) ID = <10112> Status = 0 0 0 0 ok 2008-Aug-10 00:45:24 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-10 00:45:24 LOG5 end_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2008-Aug-10 00:45:24 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2008-Aug-10 00:45:24 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2008-Aug-10 00:45:24 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2008-Aug-10 00:45:24 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2008-Aug-10 00:45:24 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2008.61063 J 2008-Aug-10 00:45:24 LOG2 antvel: Computed apparent RA = 22:40:27.2 Dec = +16:01:48.3 2008-Aug-10 00:45:24 LOG2 antvel: Parameters to Doppler: Topocentric 17124 2008 223 0.0 2008-Aug-10 00:45:24 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-10 00:45:24 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2008-Aug-10 00:45:24 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2008-Aug-10 00:45:24 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-10 00:45:24 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-10 00:45:24 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Aug-10 00:45:24 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:45:24 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Aug-10 00:45:24 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-10 00:45:24 LOG5 begin_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2008-Aug-10 00:45:24 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 21.575575 2008.6106270438815 18.999933 2008-Aug-10 00:45:24 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666664 15.983333333333329 2008-Aug-10 00:45:24 LOG4 log_alfabeam: ALFABEAM 1 22.659308166600145 15.985933759606407 2008-Aug-10 00:45:24 LOG4 log_alfabeam: ALFABEAM 2 22.663164738158812 15.905176910232345 2008-Aug-10 00:45:24 LOG4 log_alfabeam: ALFABEAM 3 22.670520378885996 15.902171975135671 2008-Aug-10 00:45:24 LOG4 log_alfabeam: ALFABEAM 4 22.674026624015028 15.980899903687021 2008-Aug-10 00:45:24 LOG4 log_alfabeam: ALFABEAM 5 22.670144944356476 16.061924197299088 2008-Aug-10 00:45:24 LOG4 log_alfabeam: ALFABEAM 6 22.662782267989318 16.063952810320334 2008-Aug-10 00:45:24 INFO2 take_data: Starting WAPP+GALFA scan: 822300023 2008-Aug-10 00:45:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-10 00:45:25 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-10 00:45:25 LOG5 begin_task: Level: (4) ID = <10114> Status = 0 0 0 0 ok 2008-Aug-10 00:45:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-10 00:45:25 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Aug-10 00:45:25 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:45:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:45:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:45:25 INFO5 check_wapp_levels: WAPP power levels are between 0.666 and 0.892 (still bad) 2008-Aug-10 00:45:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17126.00 2008-Aug-10 00:45:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-10 00:45:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:45:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:45:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:45:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:45:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:45:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:45:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:45:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:45:27 INFO5 check_wapp_levels: WAPP power levels are between 0.666 and 0.892 (still bad) 2008-Aug-10 00:45:29 INFO5 check_wapp_levels: WAPP power levels are between 0.665 and 0.889 (still bad) 2008-Aug-10 00:45:31 INFO5 check_wapp_levels: WAPP power levels are between 0.664 and 0.887 (still bad) 2008-Aug-10 00:45:33 INFO5 check_wapp_levels: WAPP power levels are between 0.663 and 0.889 (still bad) 2008-Aug-10 00:45:35 INFO5 check_wapp_levels: WAPP power levels are between 0.663 and 0.891 (still bad) 2008-Aug-10 00:45:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-10 00:45:36 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-10 00:45:36 LOG5 end_task: Level: (4) ID = <10114> Status = 0 0 0 0 ok 2008-Aug-10 00:45:36 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-10 00:45:36 LOG5 end_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2008-Aug-10 00:45:36 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2008-Aug-10 00:45:36 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2008-Aug-10 00:45:36 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2008-Aug-10 00:45:36 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2008-Aug-10 00:45:36 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2008.61063 J 2008-Aug-10 00:45:36 LOG2 antvel: Computed apparent RA = 22:40:27.2 Dec = +16:01:48.3 2008-Aug-10 00:45:36 LOG2 antvel: Parameters to Doppler: Topocentric 17136 2008 223 0.0 2008-Aug-10 00:45:36 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-10 00:45:36 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2008-Aug-10 00:45:36 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2008-Aug-10 00:45:36 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-10 00:45:36 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-10 00:45:36 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Aug-10 00:45:36 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:45:36 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Aug-10 00:45:36 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-10 00:45:36 LOG5 begin_task: Level: (3) ID = <10115> Status = 0 0 0 0 ok 2008-Aug-10 00:45:36 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 21.578917 2008.6106274241388 18.999933 2008-Aug-10 00:45:36 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666664 15.983333333333336 2008-Aug-10 00:45:36 LOG4 log_alfabeam: ALFABEAM 1 22.659308225360203 15.985967301291769 2008-Aug-10 00:45:36 LOG4 log_alfabeam: ALFABEAM 2 22.663163002301374 15.905193414455095 2008-Aug-10 00:45:36 LOG4 log_alfabeam: ALFABEAM 3 22.670518575139937 15.902153771779687 2008-Aug-10 00:45:36 LOG4 log_alfabeam: ALFABEAM 4 22.674026572836617 15.980867057432592 2008-Aug-10 00:45:36 LOG4 log_alfabeam: ALFABEAM 5 22.670146607770771 16.061909205770167 2008-Aug-10 00:45:36 LOG4 log_alfabeam: ALFABEAM 6 22.662783974390344 16.063969497784917 2008-Aug-10 00:45:36 INFO2 take_data: Starting WAPP+GALFA scan: 822300024 2008-Aug-10 00:45:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-10 00:45:37 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-10 00:45:37 LOG5 begin_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2008-Aug-10 00:45:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-10 00:45:37 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Aug-10 00:45:37 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:45:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:45:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:45:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17138.00 2008-Aug-10 00:45:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.662 < 0.75)! 2008-Aug-10 00:45:37 LOG4 check_wapp_levels: WAPP-1 power levels: 0.802 0.837 0.837 0.821 2008-Aug-10 00:45:37 LOG4 check_wapp_levels: WAPP-2 power levels: 0.724 0.724 0.690 0.755 2008-Aug-10 00:45:37 LOG4 check_wapp_levels: WAPP-3 power levels: 0.701 0.716 0.662 0.761 2008-Aug-10 00:45:37 LOG4 check_wapp_levels: WAPP-4 power levels: 0.699 0.803 0.786 0.890 2008-Aug-10 00:45:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-10 00:45:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:45:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:45:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:45:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:45:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:45:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:45:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:45:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:45:39 INFO5 check_wapp_levels: WAPP power levels are between 0.662 and 0.889 (still bad) 2008-Aug-10 00:45:41 COMMAND CIMA-send_to_exec: Sending command to abort observation 2008-Aug-10 00:45:41 LOG4 exec_msg: From OBSERVER: abort_task abort 2008-Aug-10 00:45:41 WARNING abort_task: WARNING abort requested! 2008-Aug-10 00:45:41 WARNING abort_task: WARNING Aborting waiting on WAPP+GALFA spectra 2008-Aug-10 00:45:41 WARNING abort_task: WARNING Aborting wait for waiting on WAPP+GALFA spectra 2008-Aug-10 00:45:41 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'ABORT' 2008-Aug-10 00:45:41 LOG5 end_task: Level: (4) ID = <10116> Status = 1 0 0 0 abort 2008-Aug-10 00:45:41 START begin_task: Starting task 'stopping the WAPPs' 2008-Aug-10 00:45:41 LOG5 begin_task: Level: (4) ID = <10117> Status = 1 0 0 0 abort 2008-Aug-10 00:45:41 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Stopping the WAPPs ...} 2008-Aug-10 00:45:41 INFO1 stop_wapp: Stopping the WAPPs 2008-Aug-10 00:45:41 LOG3 send_to_one_wapp: To WAPPCON: ABORT 2008-Aug-10 00:45:41 LOG3 send_to_one_wapp: To WAPPCON2: ABORT 2008-Aug-10 00:45:41 LOG3 send_to_one_wapp: To WAPPCON3: ABORT 2008-Aug-10 00:45:41 LOG3 send_to_one_wapp: To WAPPCON4: ABORT 2008-Aug-10 00:45:41 START begin_task: Starting task 'waiting on stopping WAPPs' 2008-Aug-10 00:45:41 LOG5 begin_task: Level: (5) ID = <10118> Status = 1 0 0 0 abort 2008-Aug-10 00:45:41 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ABORT' 2008-Aug-10 00:45:41 INFO5 check_wapp_levels: WAPP power levels are between 0.664 and 0.890 (still bad) 2008-Aug-10 00:45:42 NOTE WAPP=1+2+3+4-wappcon: WAPP successfully aborted! 2008-Aug-10 00:45:42 LOG4 WAPP=1+2+3+4-start_spectra: Abort request received 2008-Aug-10 00:45:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-10 00:45:42 STOP end_task: Finishing task 'waiting on stopping WAPPs' with status 'ABORT' 2008-Aug-10 00:45:42 LOG5 end_task: Level: (5) ID = <10118> Status = 1 0 0 0 abort 2008-Aug-10 00:45:42 STOP end_task: Finishing task 'stopping the WAPPs' with status 'ABORT' 2008-Aug-10 00:45:42 LOG5 end_task: Level: (4) ID = <10117> Status = 1 0 0 0 abort 2008-Aug-10 00:45:42 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'ABORT' 2008-Aug-10 00:45:42 LOG5 end_task: Level: (3) ID = <10115> Status = 1 0 0 0 abort 2008-Aug-10 00:45:43 INFO2 smartfreq: Switching off CAL 2008-Aug-10 00:45:43 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Aug-10 00:45:43 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Aug-10 00:45:43 INFO3 restore_frequencies: Restoring original frequencies 2008-Aug-10 00:45:43 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2008-Aug-10 00:45:43 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2008.61063 J 2008-Aug-10 00:45:43 LOG2 antvel: Computed apparent RA = 22:40:27.2 Dec = +16:01:48.3 2008-Aug-10 00:45:43 LOG2 antvel: Parameters to Doppler: Topocentric 17142 2008 223 0.0 2008-Aug-10 00:45:43 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-10 00:45:43 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.2 rest0=1381.2 rest1=1381.2 rest2=1381.2 rest3=1381.2 rest4=1381.2 rest5=1381.2 rest6=1381.2 rest7=1381.2 2008-Aug-10 00:45:43 INFO4 dopset_gen: New sky frequencies: 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 2008-Aug-10 00:45:43 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.200000 sky0=1381.200000 sky1=1381.200000 sky2=1381.200000 sky3=1381.200000 sky4=1381.200000 sky5=1381.200000 sky6=1381.200000 sky7=1381.200000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-10 00:45:43 LOG2 dopset_gen: Result from 'sky2syn': 1631.200000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-10 00:45:43 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2008-Aug-10 00:45:43 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:45:43 STOP finish_task: Finishing task 'smart frequency switching' 2008-Aug-10 00:45:43 LOG5 finish_task: Level: (2) ID = <10065> Status = 1 0 0 0 abort 2008-Aug-10 00:45:43 WARNING finish_task: WARNING aborted pattern: smart frequency switching 2008-Aug-10 00:45:43 LOG4 send_obs_status: To obs_status: <1> ENDTASK Aborted 2008-Aug-10 00:45:43 END end_task: Finishing task 'smart frequency switching' with status 'ABORT' 2008-Aug-10 00:45:43 LOG5 end_task: Level: (2) ID = <10065> Status = 1 0 0 0 abort 2008-Aug-10 00:45:43 ALERT run_command_file: Stopping command file processing at line 13! 2008-Aug-10 00:45:43 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2008-Aug-10 00:45:43 STOP finish_task: Finishing task 'running command file 'command_galfasrc.cmd'' 2008-Aug-10 00:45:43 LOG5 finish_task: Level: (1) ID = <10046> Status = 1 0 0 0 abort 2008-Aug-10 00:45:43 WARNING finish_task: WARNING aborted running: command file 'command_galfasrc.cmd' 2008-Aug-10 00:45:43 LOG4 send_obs_status: To obs_status: <1> ENDTASK Aborted 2008-Aug-10 00:45:43 END end_task: Finishing task 'running command file 'command_galfasrc.cmd'' with status 'ABORT' 2008-Aug-10 00:45:43 LOG5 end_task: Level: (1) ID = <10046> Status = 1 0 0 0 abort 2008-Aug-10 00:45:43 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-10 00:45:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2008-Aug-10 00:45:43 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-10 00:45:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:45:43 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-10 00:45:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:45:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:47:03 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-Aug-10 00:47:03 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc.cmd 1 1 6 2008-Aug-10 00:47:03 LOG4 run_command_file: Calling 'run_command_file command_galfasrc.cmd 1 1 6' 2008-Aug-10 00:47:03 BEGIN begin_task: Starting task 'running command file 'command_galfasrc.cmd'' 2008-Aug-10 00:47:03 LOG5 begin_task: Level: (1) ID = <10119> Status = 0 0 0 0 ok 2008-Aug-10 00:47:03 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc.cmd' ...} 2008-Aug-10 00:47:03 NOTE run_command_file: Starting execution of command file 'command_galfasrc.cmd' from line 1 2008-Aug-10 00:47:04 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_ages.conf' 2008-Aug-10 00:47:04 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2008-Aug-10 00:47:04 NOTE CIMA-check_config_file: File 'togs_ages.conf' contains a observing mode set-up which will be ignored! 2008-Aug-10 00:47:04 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Aug-10 00:47:04 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2008-Aug-10 00:47:04 NOTE CIMA-load_config_file: Loading configuration file 'togs_ages.conf' 2008-Aug-10 00:47:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Aug-10 00:47:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Aug-10 00:47:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Aug-10 00:47:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Aug-10 00:47:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Aug-10 00:47:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2008-Aug-10 00:47:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Aug-10 00:47:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1381.2" 2008-Aug-10 00:47:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1381.2" 2008-Aug-10 00:47:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1381.2" 2008-Aug-10 00:47:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1381.2" 2008-Aug-10 00:47:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1381.2" 2008-Aug-10 00:47:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1381.2" 2008-Aug-10 00:47:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1381.2" 2008-Aug-10 00:47:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1381.2" 2008-Aug-10 00:47:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1381.2" 2008-Aug-10 00:47:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Aug-10 00:47:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Aug-10 00:47:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Aug-10 00:47:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Aug-10 00:47:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Aug-10 00:47:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Aug-10 00:47:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Aug-10 00:47:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Aug-10 00:47:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Aug-10 00:47:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Aug-10 00:47:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Aug-10 00:47:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Aug-10 00:47:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Aug-10 00:47:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2008-Aug-10 00:47:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Aug-10 00:47:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Aug-10 00:47:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Aug-10 00:47:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Aug-10 00:47:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Aug-10 00:47:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Aug-10 00:47:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Aug-10 00:47:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Aug-10 00:47:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Aug-10 00:47:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1631.200000" 2008-Aug-10 00:47:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Aug-10 00:47:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Aug-10 00:47:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Aug-10 00:47:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Aug-10 00:47:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Aug-10 00:47:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Aug-10 00:47:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Aug-10 00:47:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Aug-10 00:47:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Aug-10 00:47:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Aug-10 00:47:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Aug-10 00:47:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Aug-10 00:47:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Aug-10 00:47:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Aug-10 00:47:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Aug-10 00:47:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Aug-10 00:47:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Aug-10 00:47:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Aug-10 00:47:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Aug-10 00:47:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Aug-10 00:47:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Aug-10 00:47:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Aug-10 00:47:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Aug-10 00:47:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Aug-10 00:47:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Aug-10 00:47:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Aug-10 00:47:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Aug-10 00:47:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Aug-10 00:47:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Aug-10 00:47:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Aug-10 00:47:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Aug-10 00:47:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Aug-10 00:47:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Aug-10 00:47:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Aug-10 00:47:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Aug-10 00:47:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Aug-10 00:47:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Aug-10 00:47:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Aug-10 00:47:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Aug-10 00:47:06 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Aug-10 00:47:06 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Aug-10 00:47:06 LOG5 begin_task: Level: (2) ID = <10120> Status = 0 0 0 0 ok 2008-Aug-10 00:47:06 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Aug-10 00:47:06 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Aug-10 00:47:06 LOG1 config_iflo: Receiver ALFA already selected 2008-Aug-10 00:47:06 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-10 00:47:06 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Aug-10 00:47:06 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-10 00:47:06 LOG5 begin_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2008-Aug-10 00:47:07 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-10 00:47:07 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-10 00:47:07 LOG5 end_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2008-Aug-10 00:47:07 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-10 00:47:07 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Aug-10 00:47:07 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2008-Aug-10 00:47:07 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2008-Aug-10 00:47:07 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Aug-10 00:47:07 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Aug-10 00:47:07 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2008-Aug-10 00:47:07 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2008-Aug-10 00:47:07 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2008-Aug-10 00:47:07 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2008-Aug-10 00:47:07 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2008-Aug-10 00:47:07 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2008-Aug-10 00:47:07 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Aug-10 00:47:07 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Aug-10 00:47:07 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Aug-10 00:47:07 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Aug-10 00:47:07 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Aug-10 00:47:07 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2008-Aug-10 00:47:07 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2008-Aug-10 00:47:07 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2008-Aug-10 00:47:07 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2008-Aug-10 00:47:07 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Aug-10 00:47:07 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2008-Aug-10 00:47:07 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2008-Aug-10 00:47:07 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Aug-10 00:47:07 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:47:07 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2008-Aug-10 00:47:07 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2008-Aug-10 00:47:07 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Aug-10 00:47:07 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2008-Aug-10 00:47:07 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2008-Aug-10 00:47:07 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Aug-10 00:47:07 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 00:47:07 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Aug-10 00:47:07 LOG5 begin_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2008-Aug-10 00:47:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2008-Aug-10 00:47:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Aug-10 00:47:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:47:07 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 00:47:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:47:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:47:07 LOG4 got_cormsg: From DATATAKING: vw% DONE 2008-Aug-10 00:47:07 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Aug-10 00:47:07 LOG5 end_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2008-Aug-10 00:47:07 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Aug-10 00:47:07 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Aug-10 00:47:07 LOG5 finish_task: Level: (2) ID = <10120> Status = 0 0 0 0 ok 2008-Aug-10 00:47:07 DONE finish_task: DONE finished configuration: IF/LO path 2008-Aug-10 00:47:08 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Aug-10 00:47:08 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Aug-10 00:47:08 LOG5 end_task: Level: (2) ID = <10120> Status = 0 0 0 0 ok 2008-Aug-10 00:47:08 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Aug-10 00:47:08 LOG5 begin_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2008-Aug-10 00:47:08 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Aug-10 00:47:08 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Aug-10 00:47:08 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2008-Aug-10 00:47:08 START begin_task: Starting task 'selecting calibration port' 2008-Aug-10 00:47:08 LOG5 begin_task: Level: (3) ID = <10124> Status = 0 0 0 0 ok 2008-Aug-10 00:47:08 LOG3 vw_send: To DATATAKING: calport 3 2008-Aug-10 00:47:08 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Aug-10 00:47:08 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 00:47:08 START begin_task: Starting task 'waiting on calport' 2008-Aug-10 00:47:08 LOG5 begin_task: Level: (4) ID = <10125> Status = 0 0 0 0 ok 2008-Aug-10 00:47:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:47:08 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Aug-10 00:47:08 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 00:47:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:47:08 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-10 00:47:08 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Aug-10 00:47:08 LOG5 end_task: Level: (4) ID = <10125> Status = 0 0 0 0 ok 2008-Aug-10 00:47:08 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Aug-10 00:47:08 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Aug-10 00:47:08 LOG5 end_task: Level: (3) ID = <10124> Status = 0 0 0 0 ok 2008-Aug-10 00:47:08 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Aug-10 00:47:08 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Aug-10 00:47:08 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-10 00:47:08 LOG5 begin_task: Level: (3) ID = <10126> Status = 0 0 0 0 ok 2008-Aug-10 00:47:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:47:08 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-10 00:47:08 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-10 00:47:08 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-10 00:47:08 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-10 00:47:08 LOG5 end_task: Level: (3) ID = <10126> Status = 0 0 0 0 ok 2008-Aug-10 00:47:08 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Aug-10 00:47:08 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Aug-10 00:47:08 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Aug-10 00:47:08 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Aug-10 00:47:08 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Aug-10 00:47:08 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Aug-10 00:47:08 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Aug-10 00:47:08 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Aug-10 00:47:08 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 RM 2008-Aug-10 00:47:08 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 RM 2008-Aug-10 00:47:08 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 RM 2008-Aug-10 00:47:08 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 RM 2008-Aug-10 00:47:08 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Aug-10 00:47:08 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Aug-10 00:47:08 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-10 00:47:08 LOG5 begin_task: Level: (3) ID = <10127> Status = 0 0 0 0 ok 2008-Aug-10 00:47:08 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Aug-10 00:47:08 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Aug-10 00:47:09 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-10 00:47:09 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 RM' 2008-Aug-10 00:47:09 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-10 00:47:09 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-10 00:47:09 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-10 00:47:09 LOG5 end_task: Level: (3) ID = <10127> Status = 0 0 0 0 ok 2008-Aug-10 00:47:09 LOG3 sock_errsend: To WAPPDATA: FLUSH 2008-Aug-10 00:47:09 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Aug-10 00:47:09 LOG5 finish_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2008-Aug-10 00:47:09 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Aug-10 00:47:09 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Aug-10 00:47:09 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Aug-10 00:47:09 LOG5 end_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2008-Aug-10 00:47:09 COMMAND run_command_line: EXECUTING command 6: 'CATALOG togs_ages.cat' 2008-Aug-10 00:47:09 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/togs_ages.cat' 2008-Aug-10 00:47:09 COMMAND run_command_line: EXECUTING command 7: 'GOTO galfasrc' 2008-Aug-10 00:47:09 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2048/togs_ages.cat galfasrc nooffset nowait' 2008-Aug-10 00:47:09 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2008-Aug-10 00:47:09 LOG5 begin_task: Level: (2) ID = <10128> Status = 0 0 0 0 ok 2008-Aug-10 00:47:09 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2008-Aug-10 00:47:09 LOG3 track_source: Calling 'track_source galfasrc 224000.0 +155900 J 0.0 0.0 main small /share/obs4/usr/a2048/togs_ages.cat 0 Topocentric velocity(optical)' 2008-Aug-10 00:47:09 START begin_task: Starting task 'sending tracking commands' 2008-Aug-10 00:47:09 LOG5 begin_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2008-Aug-10 00:47:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2008-Aug-10 00:47:09 INFO1 track_source: Starting to track galfasrc 2008-Aug-10 00:47:09 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2008-Aug-10 00:47:09 LOG3 vw_send: To DATATAKING: set ra 224000.0 2008-Aug-10 00:47:09 LOG3 vw_send: To DATATAKING: set dec +155900 2008-Aug-10 00:47:09 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Aug-10 00:47:09 LOG3 vw_send: To DATATAKING: pnt tr 224000.0 +155900 -CJ 2008-Aug-10 00:47:09 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Aug-10 00:47:09 STOP finish_task: Finishing task 'sending tracking commands' 2008-Aug-10 00:47:09 LOG5 finish_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2008-Aug-10 00:47:09 INFO2 finish_task: DONE finished sending: tracking commands 2008-Aug-10 00:47:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 00:47:09 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Aug-10 00:47:09 LOG5 end_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2008-Aug-10 00:47:09 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2008-Aug-10 00:47:09 LOG5 finish_task: Level: (2) ID = <10128> Status = 0 0 0 0 ok 2008-Aug-10 00:47:09 DONE finish_task: DONE finished tracking: source 'galfasrc' 2008-Aug-10 00:47:09 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Aug-10 00:47:09 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2008-Aug-10 00:47:09 LOG5 end_task: Level: (2) ID = <10128> Status = 0 0 0 0 ok 2008-Aug-10 00:47:09 COMMAND run_command_line: EXECUTING command 8: 'ALFAANGLE 19' 2008-Aug-10 00:47:09 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2008-Aug-10 00:47:09 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Aug-10 00:47:09 LOG5 begin_task: Level: (2) ID = <10130> Status = 0 0 0 0 ok 2008-Aug-10 00:47:09 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Aug-10 00:47:09 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Aug-10 00:47:09 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-Aug-10 00:47:09 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Aug-10 00:47:09 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Aug-10 00:47:09 LOG5 begin_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2008-Aug-10 00:47:09 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Aug-10 00:47:09 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2008-Aug-10 00:47:09 LOG4 got_cormsg: From DATATAKING: set ra 224000.0 2008-Aug-10 00:47:09 LOG4 got_cormsg: From DATATAKING: set dec +155900 2008-Aug-10 00:47:09 LOG4 got_cormsg: From DATATAKING: vw% 224000.0 2008-Aug-10 00:47:09 LOG4 got_cormsg: From DATATAKING: vw% +155900 2008-Aug-10 00:47:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:47:10 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Aug-10 00:47:10 LOG4 got_cormsg: From DATATAKING: pnt tr 224000.0 +155900 -CJ 2008-Aug-10 00:47:10 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Aug-10 00:47:10 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Aug-10 00:47:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:47:10 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Aug-10 00:47:10 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Aug-10 00:47:10 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Aug-10 00:47:10 LOG5 end_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2008-Aug-10 00:47:10 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Aug-10 00:47:10 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Aug-10 00:47:10 LOG5 finish_task: Level: (2) ID = <10130> Status = 0 0 0 0 ok 2008-Aug-10 00:47:10 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Aug-10 00:47:10 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Aug-10 00:47:10 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Aug-10 00:47:10 LOG5 end_task: Level: (2) ID = <10130> Status = 0 0 0 0 ok 2008-Aug-10 00:47:10 COMMAND run_command_line: EXECUTING command 9: 'WAITTRACK' 2008-Aug-10 00:47:10 BEGIN begin_task: Starting task 'waiting on telescope' 2008-Aug-10 00:47:10 LOG5 begin_task: Level: (2) ID = <10132> Status = 0 0 0 0 ok 2008-Aug-10 00:47:10 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Aug-10 00:47:10 LOG3 waittrk: Start waittrk 5 2008-Aug-10 00:47:10 START begin_task: Starting task 'waiting on telescope movement' 2008-Aug-10 00:47:10 LOG5 begin_task: Level: (3) ID = <10133> Status = 0 0 0 0 ok 2008-Aug-10 00:47:16 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Aug-10 00:47:16 LOG5 end_task: Level: (3) ID = <10133> Status = 0 0 0 0 ok 2008-Aug-10 00:47:16 START begin_task: Starting task 'waiting on telescope on source' 2008-Aug-10 00:47:16 LOG5 begin_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2008-Aug-10 00:47:17 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Aug-10 00:47:17 LOG5 end_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2008-Aug-10 00:47:17 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Aug-10 00:47:17 INFO2 waittrk: Now tracking galfasrc 2008-Aug-10 00:47:17 LOG4 waittrk: Current telescope position: Az = 275.81 ZA = 15.47 2008-Aug-10 00:47:17 STOP finish_task: Finishing task 'waiting on telescope' 2008-Aug-10 00:47:17 LOG5 finish_task: Level: (2) ID = <10132> Status = 0 0 0 0 ok 2008-Aug-10 00:47:17 DONE finish_task: DONE finished waiting: telescope on source 2008-Aug-10 00:47:17 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Aug-10 00:47:17 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Aug-10 00:47:17 LOG5 end_task: Level: (2) ID = <10132> Status = 0 0 0 0 ok 2008-Aug-10 00:47:17 COMMAND run_command_line: EXECUTING command 13: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2008-Aug-10 00:47:17 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2008-Aug-10 00:47:17 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Aug-10 00:47:17 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first 0 {1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2008-Aug-10 00:47:17 BEGIN begin_task: Starting task 'smart frequency switching' 2008-Aug-10 00:47:17 LOG5 begin_task: Level: (2) ID = <10135> Status = 0 0 0 0 ok 2008-Aug-10 00:47:17 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'galfasrc' 2008-Aug-10 00:47:17 INFO1 smartfreq: Starting pattern: Smart frequency switching 2008-Aug-10 00:47:17 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2008-Aug-10 00:47:17 START begin_task: Starting task 'selecting calibration type' 2008-Aug-10 00:47:17 LOG5 begin_task: Level: (3) ID = <10136> Status = 0 0 0 0 ok 2008-Aug-10 00:47:17 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Aug-10 00:47:17 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Aug-10 00:47:17 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 00:47:17 START begin_task: Starting task 'waiting on setcal' 2008-Aug-10 00:47:17 LOG5 begin_task: Level: (4) ID = <10137> Status = 0 0 0 0 ok 2008-Aug-10 00:47:17 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Aug-10 00:47:17 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 00:47:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:47:17 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-10 00:47:17 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Aug-10 00:47:17 LOG5 end_task: Level: (4) ID = <10137> Status = 0 0 0 0 ok 2008-Aug-10 00:47:17 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Aug-10 00:47:17 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-10 00:47:17 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Aug-10 00:47:17 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-10 00:47:17 LOG5 begin_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2008-Aug-10 00:47:17 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-10 00:47:17 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-10 00:47:17 LOG5 end_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2008-Aug-10 00:47:17 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-10 00:47:17 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Aug-10 00:47:17 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-10 00:47:17 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Aug-10 00:47:17 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-10 00:47:17 LOG5 begin_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2008-Aug-10 00:47:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:47:18 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-10 00:47:18 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-10 00:47:18 LOG5 end_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2008-Aug-10 00:47:18 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-10 00:47:18 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Aug-10 00:47:18 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Aug-10 00:47:18 LOG5 end_task: Level: (3) ID = <10136> Status = 0 0 0 0 ok 2008-Aug-10 00:47:18 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 RM 2008-Aug-10 00:47:18 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 RM 2008-Aug-10 00:47:18 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 RM 2008-Aug-10 00:47:18 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 RM 2008-Aug-10 00:47:18 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2008-Aug-10 00:47:18 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Aug-10 00:47:18 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2008-Aug-10 00:47:18 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Aug-10 00:47:18 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Aug-10 00:47:18 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-10 00:47:18 LOG5 begin_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2008-Aug-10 00:47:18 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 RM' 2008-Aug-10 00:47:18 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-10 00:47:18 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-10 00:47:18 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-10 00:47:18 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-10 00:47:18 LOG5 end_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2008-Aug-10 00:47:18 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2008-Aug-10 00:47:18 START begin_task: Starting task 'adjusting WAPP power' 2008-Aug-10 00:47:18 LOG5 begin_task: Level: (3) ID = <10141> Status = 0 0 0 0 ok 2008-Aug-10 00:47:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Aug-10 00:47:18 INFO2 adjust_power: Starting to adjust WAPP power 2008-Aug-10 00:47:18 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Aug-10 00:47:18 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Aug-10 00:47:18 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 00:47:18 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Aug-10 00:47:18 LOG5 begin_task: Level: (4) ID = <10142> Status = 0 0 0 0 ok 2008-Aug-10 00:47:18 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Aug-10 00:47:18 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 00:47:18 NOTE WAPPDATA-new_file: New FITS file: wapp.20080810.a2048.0002.fits 2008-Aug-10 00:47:18 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080810.a2048.0002.fits} 2008-Aug-10 00:47:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:47:21 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-10 00:47:21 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Aug-10 00:47:21 LOG5 end_task: Level: (4) ID = <10142> Status = 0 0 0 0 ok 2008-Aug-10 00:47:21 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Aug-10 00:47:21 START begin_task: Starting task 'adjusting WAPP power' 2008-Aug-10 00:47:21 LOG5 begin_task: Level: (4) ID = <10143> Status = 0 0 0 0 ok 2008-Aug-10 00:47:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Aug-10 00:47:21 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Aug-10 00:47:21 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Aug-10 00:47:21 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Aug-10 00:47:21 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Aug-10 00:47:21 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Aug-10 00:47:21 LOG5 begin_task: Level: (5) ID = <10144> Status = 0 0 0 0 ok 2008-Aug-10 00:47:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:47:21 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Aug-10 00:47:21 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 6 dB 2008-Aug-10 00:47:21 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 2 dB --- beam 5: 5 5 dB 2008-Aug-10 00:47:21 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 3 dB 2008-Aug-10 00:47:21 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 2 dB --- beam 7: 2 2 dB 2008-Aug-10 00:47:21 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Aug-10 00:47:21 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Aug-10 00:47:21 LOG5 end_task: Level: (5) ID = <10144> Status = 0 0 0 0 ok 2008-Aug-10 00:47:21 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.999 1.050 ALFA beam 1: 1.041 1.013 2008-Aug-10 00:47:21 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.903 0.915 ALFA beam 3: 1.073 0.929 2008-Aug-10 00:47:21 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.091 1.105 ALFA beam 5: 1.071 0.968 2008-Aug-10 00:47:21 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.094 1.004 ALFA beam 7: 0.981 1.110 2008-Aug-10 00:47:22 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Aug-10 00:47:22 LOG5 finish_task: Level: (4) ID = <10143> Status = 0 0 0 0 ok 2008-Aug-10 00:47:22 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Aug-10 00:47:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 00:47:22 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Aug-10 00:47:22 LOG5 end_task: Level: (4) ID = <10143> Status = 0 0 0 0 ok 2008-Aug-10 00:47:22 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Aug-10 00:47:22 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Aug-10 00:47:22 LOG5 finish_task: Level: (3) ID = <10141> Status = 0 0 0 0 ok 2008-Aug-10 00:47:22 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Aug-10 00:47:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 00:47:22 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Aug-10 00:47:22 LOG5 end_task: Level: (3) ID = <10141> Status = 0 0 0 0 ok 2008-Aug-10 00:47:22 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2008-Aug-10 00:47:22 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2008-Aug-10 00:47:22 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2008-Aug-10 00:47:22 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2008-Aug-10 00:47:22 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2008.61063 J 2008-Aug-10 00:47:22 LOG2 antvel: Computed apparent RA = 22:40:27.2 Dec = +16:01:48.3 2008-Aug-10 00:47:22 LOG2 antvel: Parameters to Doppler: Topocentric 17241 2008 223 0.0 2008-Aug-10 00:47:22 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-10 00:47:22 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2008-Aug-10 00:47:22 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2008-Aug-10 00:47:22 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-10 00:47:22 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-10 00:47:22 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Aug-10 00:47:22 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:47:22 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Aug-10 00:47:22 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-10 00:47:22 LOG5 begin_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2008-Aug-10 00:47:22 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 21.608164 2008.6106307513878 18.999933 2008-Aug-10 00:47:22 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666661 15.983333333333336 2008-Aug-10 00:47:22 LOG4 log_alfabeam: ALFABEAM 1 22.659308795044190 15.986273238156992 2008-Aug-10 00:47:22 LOG4 log_alfabeam: ALFABEAM 2 22.663147188706308 15.905344263983153 2008-Aug-10 00:47:22 LOG4 log_alfabeam: ALFABEAM 3 22.670502106213235 15.901988190857464 2008-Aug-10 00:47:22 LOG4 log_alfabeam: ALFABEAM 4 22.674026073085592 15.980567378384691 2008-Aug-10 00:47:22 LOG4 log_alfabeam: ALFABEAM 5 22.670161773235957 16.061772020286270 2008-Aug-10 00:47:22 LOG4 log_alfabeam: ALFABEAM 6 22.662799562514849 16.064121484971878 2008-Aug-10 00:47:22 INFO2 take_data: Starting WAPP+GALFA scan: 822300025 2008-Aug-10 00:47:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-10 00:47:22 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-10 00:47:22 LOG5 begin_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2008-Aug-10 00:47:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-10 00:47:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Aug-10 00:47:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:47:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:47:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:47:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17243.00 2008-Aug-10 00:47:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-10 00:47:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:47:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:47:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:47:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:47:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:47:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:47:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:47:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:47:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-10 00:47:33 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-10 00:47:33 LOG5 end_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2008-Aug-10 00:47:33 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-10 00:47:33 LOG5 end_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2008-Aug-10 00:47:33 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2008-Aug-10 00:47:33 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2008-Aug-10 00:47:33 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2008-Aug-10 00:47:33 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2008-Aug-10 00:47:33 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2008.61063 J 2008-Aug-10 00:47:33 LOG2 antvel: Computed apparent RA = 22:40:27.2 Dec = +16:01:48.3 2008-Aug-10 00:47:33 LOG2 antvel: Parameters to Doppler: Topocentric 17253 2008 223 0.0 2008-Aug-10 00:47:33 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-10 00:47:33 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2008-Aug-10 00:47:33 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2008-Aug-10 00:47:33 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-10 00:47:33 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-10 00:47:33 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Aug-10 00:47:33 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:47:33 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Aug-10 00:47:33 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-10 00:47:33 LOG5 begin_task: Level: (3) ID = <10147> Status = 0 0 0 0 ok 2008-Aug-10 00:47:33 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 21.611506 2008.6106311316451 18.999933 2008-Aug-10 00:47:33 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666664 15.983333333333333 2008-Aug-10 00:47:33 LOG4 log_alfabeam: ALFABEAM 1 22.659308866916852 15.986309660134950 2008-Aug-10 00:47:33 LOG4 log_alfabeam: ALFABEAM 2 22.663145308387652 15.905362260705733 2008-Aug-10 00:47:33 LOG4 log_alfabeam: ALFABEAM 3 22.670500143543432 15.901968532279041 2008-Aug-10 00:47:33 LOG4 log_alfabeam: ALFABEAM 4 22.674026009634037 15.980531691729489 2008-Aug-10 00:47:33 LOG4 log_alfabeam: ALFABEAM 5 22.670163577840061 16.061755635328922 2008-Aug-10 00:47:33 LOG4 log_alfabeam: ALFABEAM 6 22.662801421112210 16.064139551784891 2008-Aug-10 00:47:33 INFO2 take_data: Starting WAPP+GALFA scan: 822300026 2008-Aug-10 00:47:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-10 00:47:34 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-10 00:47:34 LOG5 begin_task: Level: (4) ID = <10148> Status = 0 0 0 0 ok 2008-Aug-10 00:47:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-10 00:47:34 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Aug-10 00:47:34 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:47:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:47:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:47:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17255.00 2008-Aug-10 00:47:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-10 00:47:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:47:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:47:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:47:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:47:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:47:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:47:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:47:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:47:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-10 00:47:45 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-10 00:47:45 LOG5 end_task: Level: (4) ID = <10148> Status = 0 0 0 0 ok 2008-Aug-10 00:47:45 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-10 00:47:45 LOG5 end_task: Level: (3) ID = <10147> Status = 0 0 0 0 ok 2008-Aug-10 00:47:45 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2008-Aug-10 00:47:45 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2008-Aug-10 00:47:45 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2008-Aug-10 00:47:45 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2008-Aug-10 00:47:45 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2008.61063 J 2008-Aug-10 00:47:45 LOG2 antvel: Computed apparent RA = 22:40:27.2 Dec = +16:01:48.3 2008-Aug-10 00:47:45 LOG2 antvel: Parameters to Doppler: Topocentric 17265 2008 223 0.0 2008-Aug-10 00:47:45 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-10 00:47:45 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2008-Aug-10 00:47:45 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2008-Aug-10 00:47:45 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-10 00:47:45 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-10 00:47:45 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Aug-10 00:47:45 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:47:45 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Aug-10 00:47:45 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-10 00:47:45 LOG5 begin_task: Level: (3) ID = <10149> Status = 0 0 0 0 ok 2008-Aug-10 00:47:45 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 21.614849 2008.6106315119021 18.999933 2008-Aug-10 00:47:45 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666664 15.983333333333322 2008-Aug-10 00:47:45 LOG4 log_alfabeam: ALFABEAM 1 22.659308940296587 15.986346403010083 2008-Aug-10 00:47:45 LOG4 log_alfabeam: ALFABEAM 2 22.663143411994142 15.905380424263420 2008-Aug-10 00:47:45 LOG4 log_alfabeam: ALFABEAM 3 22.670498163139406 15.901948712020504 2008-Aug-10 00:47:45 LOG4 log_alfabeam: ALFABEAM 4 22.674025944770538 15.980495688683549 2008-Aug-10 00:47:45 LOG4 log_alfabeam: ALFABEAM 5 22.670165398149329 16.061739094728882 2008-Aug-10 00:47:45 LOG4 log_alfabeam: ALFABEAM 6 22.662803296683812 16.064157771705599 2008-Aug-10 00:47:45 INFO2 take_data: Starting WAPP+GALFA scan: 822300027 2008-Aug-10 00:47:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-10 00:47:46 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-10 00:47:46 LOG5 begin_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2008-Aug-10 00:47:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-10 00:47:46 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Aug-10 00:47:46 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:47:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:47:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:47:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17267.00 2008-Aug-10 00:47:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-10 00:47:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:47:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:47:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:47:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:47:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:47:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:47:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:47:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:47:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-10 00:47:57 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-10 00:47:57 LOG5 end_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2008-Aug-10 00:47:57 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-10 00:47:57 LOG5 end_task: Level: (3) ID = <10149> Status = 0 0 0 0 ok 2008-Aug-10 00:47:57 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2008-Aug-10 00:47:57 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2008-Aug-10 00:47:57 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2008-Aug-10 00:47:57 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2008-Aug-10 00:47:57 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2008.61063 J 2008-Aug-10 00:47:57 LOG2 antvel: Computed apparent RA = 22:40:27.2 Dec = +16:01:48.3 2008-Aug-10 00:47:57 LOG2 antvel: Parameters to Doppler: Topocentric 17277 2008 223 0.0 2008-Aug-10 00:47:57 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-10 00:47:57 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2008-Aug-10 00:47:57 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2008-Aug-10 00:47:57 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-10 00:47:57 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-10 00:47:57 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Aug-10 00:47:57 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:47:57 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Aug-10 00:47:57 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-10 00:47:57 LOG5 begin_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2008-Aug-10 00:47:57 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 21.618191 2008.6106318921591 18.999933 2008-Aug-10 00:47:57 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666664 15.983333333333320 2008-Aug-10 00:47:57 LOG4 log_alfabeam: ALFABEAM 1 22.659309015167594 15.986383447623934 2008-Aug-10 00:47:57 LOG4 log_alfabeam: ALFABEAM 2 22.663141500526034 15.905398745419596 2008-Aug-10 00:47:57 LOG4 log_alfabeam: ALFABEAM 3 22.670496166021525 15.901928740681770 2008-Aug-10 00:47:57 LOG4 log_alfabeam: ALFABEAM 4 22.674025878507127 15.980459388000343 2008-Aug-10 00:47:57 LOG4 log_alfabeam: ALFABEAM 5 22.670167233206868 16.061722406858461 2008-Aug-10 00:47:57 LOG4 log_alfabeam: ALFABEAM 6 22.662805188264471 16.064176135031502 2008-Aug-10 00:47:57 INFO2 take_data: Starting WAPP+GALFA scan: 822300028 2008-Aug-10 00:47:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-10 00:47:58 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-10 00:47:58 LOG5 begin_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2008-Aug-10 00:47:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-10 00:47:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Aug-10 00:47:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:47:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:47:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:47:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17279.00 2008-Aug-10 00:48:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-10 00:48:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:48:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:48:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:48:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:48:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:48:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:48:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:48:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:48:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-10 00:48:09 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-10 00:48:09 LOG5 end_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2008-Aug-10 00:48:09 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-10 00:48:09 LOG5 end_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2008-Aug-10 00:48:09 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2008-Aug-10 00:48:09 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2008-Aug-10 00:48:09 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2008-Aug-10 00:48:09 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2008-Aug-10 00:48:09 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2008.61063 J 2008-Aug-10 00:48:09 LOG2 antvel: Computed apparent RA = 22:40:27.2 Dec = +16:01:48.3 2008-Aug-10 00:48:09 LOG2 antvel: Parameters to Doppler: Topocentric 17289 2008 223 0.0 2008-Aug-10 00:48:09 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-10 00:48:09 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2008-Aug-10 00:48:09 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2008-Aug-10 00:48:09 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-10 00:48:09 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-10 00:48:09 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Aug-10 00:48:09 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:48:09 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Aug-10 00:48:09 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-10 00:48:09 LOG5 begin_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2008-Aug-10 00:48:09 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 21.621534 2008.6106322724161 18.999933 2008-Aug-10 00:48:09 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666664 15.983333333333327 2008-Aug-10 00:48:09 LOG4 log_alfabeam: ALFABEAM 1 22.659309091603266 15.986420819004673 2008-Aug-10 00:48:09 LOG4 log_alfabeam: ALFABEAM 2 22.663139572703546 15.905417236791076 2008-Aug-10 00:48:09 LOG4 log_alfabeam: ALFABEAM 3 22.670494150827981 15.901908605039585 2008-Aug-10 00:48:09 LOG4 log_alfabeam: ALFABEAM 4 22.674025810776858 15.980422765134985 2008-Aug-10 00:48:09 LOG4 log_alfabeam: ALFABEAM 5 22.670169084244556 16.061705560186407 2008-Aug-10 00:48:09 LOG4 log_alfabeam: ALFABEAM 6 22.662807097145162 16.064194653962979 2008-Aug-10 00:48:09 INFO2 take_data: Starting WAPP+GALFA scan: 822300029 2008-Aug-10 00:48:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-10 00:48:10 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-10 00:48:10 LOG5 begin_task: Level: (4) ID = <10154> Status = 0 0 0 0 ok 2008-Aug-10 00:48:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-10 00:48:10 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Aug-10 00:48:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:48:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:48:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:48:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17291.00 2008-Aug-10 00:48:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-10 00:48:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:48:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:48:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:48:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:48:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:48:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:48:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:48:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:48:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-10 00:48:21 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-10 00:48:21 LOG5 end_task: Level: (4) ID = <10154> Status = 0 0 0 0 ok 2008-Aug-10 00:48:21 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-10 00:48:21 LOG5 end_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2008-Aug-10 00:48:21 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2008-Aug-10 00:48:21 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2008-Aug-10 00:48:21 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2008-Aug-10 00:48:21 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2008-Aug-10 00:48:21 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2008.61063 J 2008-Aug-10 00:48:21 LOG2 antvel: Computed apparent RA = 22:40:27.2 Dec = +16:01:48.3 2008-Aug-10 00:48:21 LOG2 antvel: Parameters to Doppler: Topocentric 17301 2008 223 0.0 2008-Aug-10 00:48:21 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-10 00:48:21 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2008-Aug-10 00:48:21 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2008-Aug-10 00:48:21 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-10 00:48:21 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-10 00:48:21 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Aug-10 00:48:21 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:48:21 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Aug-10 00:48:21 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-10 00:48:21 LOG5 begin_task: Level: (3) ID = <10155> Status = 0 0 0 0 ok 2008-Aug-10 00:48:21 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 21.624876 2008.6106326526731 18.999933 2008-Aug-10 00:48:21 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666664 15.983333333333322 2008-Aug-10 00:48:21 LOG4 log_alfabeam: ALFABEAM 1 22.659309169587033 15.986458497686899 2008-Aug-10 00:48:21 LOG4 log_alfabeam: ALFABEAM 2 22.663137629542646 15.905435888989297 2008-Aug-10 00:48:21 LOG4 log_alfabeam: ALFABEAM 3 22.670492118595707 15.901888315856153 2008-Aug-10 00:48:21 LOG4 log_alfabeam: ALFABEAM 4 22.674025741592455 15.980385839143498 2008-Aug-10 00:48:21 LOG4 log_alfabeam: ALFABEAM 5 22.670170950290174 16.061688563226696 2008-Aug-10 00:48:21 LOG4 log_alfabeam: ALFABEAM 6 22.662809022344813 16.064213318643915 2008-Aug-10 00:48:21 INFO2 take_data: Starting WAPP+GALFA scan: 822300030 2008-Aug-10 00:48:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-10 00:48:22 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-10 00:48:22 LOG5 begin_task: Level: (4) ID = <10156> Status = 0 0 0 0 ok 2008-Aug-10 00:48:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-10 00:48:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Aug-10 00:48:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:48:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:48:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:48:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17303.00 2008-Aug-10 00:48:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-10 00:48:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:48:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:48:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:48:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:48:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:48:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:48:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:48:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:48:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-10 00:48:33 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-10 00:48:33 LOG5 end_task: Level: (4) ID = <10156> Status = 0 0 0 0 ok 2008-Aug-10 00:48:33 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-10 00:48:33 LOG5 end_task: Level: (3) ID = <10155> Status = 0 0 0 0 ok 2008-Aug-10 00:48:33 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2008-Aug-10 00:48:33 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2008-Aug-10 00:48:33 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2008-Aug-10 00:48:33 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2008-Aug-10 00:48:33 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2008.61063 J 2008-Aug-10 00:48:33 LOG2 antvel: Computed apparent RA = 22:40:27.2 Dec = +16:01:48.3 2008-Aug-10 00:48:33 LOG2 antvel: Parameters to Doppler: Topocentric 17313 2008 223 0.0 2008-Aug-10 00:48:33 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-10 00:48:33 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2008-Aug-10 00:48:33 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2008-Aug-10 00:48:33 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-10 00:48:33 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-10 00:48:33 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Aug-10 00:48:33 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:48:33 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Aug-10 00:48:33 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-10 00:48:33 LOG5 begin_task: Level: (3) ID = <10157> Status = 0 0 0 0 ok 2008-Aug-10 00:48:33 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 21.628219 2008.6106330329303 18.999933 2008-Aug-10 00:48:33 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666661 15.983333333333343 2008-Aug-10 00:48:33 LOG4 log_alfabeam: ALFABEAM 1 22.659309249195271 15.986496509148411 2008-Aug-10 00:48:33 LOG4 log_alfabeam: ALFABEAM 2 22.663135669741415 15.905454714874210 2008-Aug-10 00:48:33 LOG4 log_alfabeam: ALFABEAM 3 22.670490067937550 15.901867859691365 2008-Aug-10 00:48:33 LOG4 log_alfabeam: ALFABEAM 4 22.674025670884127 15.980348585037561 2008-Aug-10 00:48:33 LOG4 log_alfabeam: ALFABEAM 5 22.670172832597270 16.061671404220959 2008-Aug-10 00:48:33 LOG4 log_alfabeam: ALFABEAM 6 22.662810965178622 16.064232141480645 2008-Aug-10 00:48:33 INFO2 take_data: Starting WAPP+GALFA scan: 822300031 2008-Aug-10 00:48:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-10 00:48:34 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-10 00:48:34 LOG5 begin_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2008-Aug-10 00:48:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-10 00:48:34 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Aug-10 00:48:34 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:48:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:48:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:48:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17315.00 2008-Aug-10 00:48:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-10 00:48:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:48:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:48:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:48:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:48:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:48:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:48:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:48:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:48:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-10 00:48:45 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-10 00:48:45 LOG5 end_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2008-Aug-10 00:48:45 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-10 00:48:45 LOG5 end_task: Level: (3) ID = <10157> Status = 0 0 0 0 ok 2008-Aug-10 00:48:45 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2008-Aug-10 00:48:45 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Aug-10 00:48:45 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Aug-10 00:48:45 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-10 00:48:45 LOG5 begin_task: Level: (3) ID = <10159> Status = 0 0 0 0 ok 2008-Aug-10 00:48:45 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-10 00:48:45 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Aug-10 00:48:45 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-10 00:48:45 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-10 00:48:45 LOG5 end_task: Level: (3) ID = <10159> Status = 0 0 0 0 ok 2008-Aug-10 00:48:45 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2008-Aug-10 00:48:45 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2008-Aug-10 00:48:45 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2008-Aug-10 00:48:45 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2008-Aug-10 00:48:45 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2008.61063 J 2008-Aug-10 00:48:45 LOG2 antvel: Computed apparent RA = 22:40:27.2 Dec = +16:01:48.3 2008-Aug-10 00:48:45 LOG2 antvel: Parameters to Doppler: Topocentric 17325 2008 223 0.0 2008-Aug-10 00:48:45 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-10 00:48:45 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2008-Aug-10 00:48:45 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2008-Aug-10 00:48:45 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-10 00:48:45 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-10 00:48:45 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Aug-10 00:48:45 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:48:45 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Aug-10 00:48:45 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-10 00:48:45 LOG5 begin_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2008-Aug-10 00:48:45 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 21.631561 2008.6106334131873 18.999933 2008-Aug-10 00:48:45 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666668 15.983333333333345 2008-Aug-10 00:48:45 LOG4 log_alfabeam: ALFABEAM 1 22.659309330410625 15.986534833612120 2008-Aug-10 00:48:45 LOG4 log_alfabeam: ALFABEAM 2 22.663133694331798 15.905473704902850 2008-Aug-10 00:48:45 LOG4 log_alfabeam: ALFABEAM 3 22.670487999907259 15.901847247472121 2008-Aug-10 00:48:45 LOG4 log_alfabeam: ALFABEAM 4 22.674025598665310 15.980311022180448 2008-Aug-10 00:48:45 LOG4 log_alfabeam: ALFABEAM 5 22.670174730178069 16.061654091827197 2008-Aug-10 00:48:45 LOG4 log_alfabeam: ALFABEAM 6 22.662812924649369 16.064251112461207 2008-Aug-10 00:48:45 INFO2 take_data: Starting WAPP+GALFA scan: 822300032 2008-Aug-10 00:48:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-10 00:48:46 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-10 00:48:46 LOG5 begin_task: Level: (4) ID = <10161> Status = 0 0 0 0 ok 2008-Aug-10 00:48:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-10 00:48:46 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Aug-10 00:48:46 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:48:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:48:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:48:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17327.00 2008-Aug-10 00:48:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-10 00:48:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:48:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:48:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:48:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:48:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:48:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:48:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:48:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:48:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-10 00:48:57 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-10 00:48:57 LOG5 end_task: Level: (4) ID = <10161> Status = 0 0 0 0 ok 2008-Aug-10 00:48:57 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-10 00:48:57 LOG5 end_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2008-Aug-10 00:48:57 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2008-Aug-10 00:48:57 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2008-Aug-10 00:48:57 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2008-Aug-10 00:48:57 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2008-Aug-10 00:48:57 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2008.61063 J 2008-Aug-10 00:48:57 LOG2 antvel: Computed apparent RA = 22:40:27.2 Dec = +16:01:48.3 2008-Aug-10 00:48:57 LOG2 antvel: Parameters to Doppler: Topocentric 17337 2008 223 0.0 2008-Aug-10 00:48:57 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-10 00:48:57 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2008-Aug-10 00:48:57 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2008-Aug-10 00:48:57 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-10 00:48:57 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-10 00:48:57 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Aug-10 00:48:57 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:48:57 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Aug-10 00:48:57 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-10 00:48:57 LOG5 begin_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2008-Aug-10 00:48:57 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 21.634903 2008.6106337934443 18.999933 2008-Aug-10 00:48:57 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666664 15.983333333333322 2008-Aug-10 00:48:57 LOG4 log_alfabeam: ALFABEAM 1 22.659309413287513 15.986573485399800 2008-Aug-10 00:48:57 LOG4 log_alfabeam: ALFABEAM 2 22.663131702587766 15.905492866424405 2008-Aug-10 00:48:57 LOG4 log_alfabeam: ALFABEAM 3 22.670485913718803 15.901826471778721 2008-Aug-10 00:48:57 LOG4 log_alfabeam: ALFABEAM 4 22.674025524885590 15.980273136516129 2008-Aug-10 00:48:57 LOG4 log_alfabeam: ALFABEAM 5 22.670176643733193 16.061636619306977 2008-Aug-10 00:48:57 LOG4 log_alfabeam: ALFABEAM 6 22.662814901502877 16.064270238455233 2008-Aug-10 00:48:57 INFO2 take_data: Starting WAPP+GALFA scan: 822300033 2008-Aug-10 00:48:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-10 00:48:58 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-10 00:48:58 LOG5 begin_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2008-Aug-10 00:48:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-10 00:48:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Aug-10 00:48:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:48:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:48:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:48:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17339.00 2008-Aug-10 00:49:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-10 00:49:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:49:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:49:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:49:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:49:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:49:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:49:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:49:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:49:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-10 00:49:09 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-10 00:49:09 LOG5 end_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2008-Aug-10 00:49:09 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-10 00:49:09 LOG5 end_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2008-Aug-10 00:49:09 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2008-Aug-10 00:49:09 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2008-Aug-10 00:49:09 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2008-Aug-10 00:49:09 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2008-Aug-10 00:49:09 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2008.61063 J 2008-Aug-10 00:49:09 LOG2 antvel: Computed apparent RA = 22:40:27.2 Dec = +16:01:48.3 2008-Aug-10 00:49:09 LOG2 antvel: Parameters to Doppler: Topocentric 17349 2008 223 0.0 2008-Aug-10 00:49:09 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-10 00:49:09 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2008-Aug-10 00:49:09 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2008-Aug-10 00:49:09 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-10 00:49:09 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-10 00:49:09 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Aug-10 00:49:09 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:49:09 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Aug-10 00:49:09 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-10 00:49:09 LOG5 begin_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2008-Aug-10 00:49:09 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 21.638246 2008.6106341737013 18.999933 2008-Aug-10 00:49:09 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666661 15.983333333333340 2008-Aug-10 00:49:09 LOG4 log_alfabeam: ALFABEAM 1 22.659309497882958 15.986612479262002 2008-Aug-10 00:49:09 LOG4 log_alfabeam: ALFABEAM 2 22.663129693762144 15.905512207017098 2008-Aug-10 00:49:09 LOG4 log_alfabeam: ALFABEAM 3 22.670483808562132 15.901805524981862 2008-Aug-10 00:49:09 LOG4 log_alfabeam: ALFABEAM 4 22.674025449492188 15.980234913565630 2008-Aug-10 00:49:09 LOG4 log_alfabeam: ALFABEAM 5 22.670178573984064 16.061618979707934 2008-Aug-10 00:49:09 LOG4 log_alfabeam: ALFABEAM 6 22.662816896507941 16.064289526531322 2008-Aug-10 00:49:09 INFO2 take_data: Starting WAPP+GALFA scan: 822300034 2008-Aug-10 00:49:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-10 00:49:10 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-10 00:49:10 LOG5 begin_task: Level: (4) ID = <10165> Status = 0 0 0 0 ok 2008-Aug-10 00:49:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-10 00:49:10 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Aug-10 00:49:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:49:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:49:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:49:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17351.00 2008-Aug-10 00:49:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-10 00:49:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:49:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:49:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:49:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:49:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:49:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:49:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:49:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:49:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-10 00:49:21 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-10 00:49:21 LOG5 end_task: Level: (4) ID = <10165> Status = 0 0 0 0 ok 2008-Aug-10 00:49:21 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-10 00:49:21 LOG5 end_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2008-Aug-10 00:49:21 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2008-Aug-10 00:49:21 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2008-Aug-10 00:49:21 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2008-Aug-10 00:49:21 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2008-Aug-10 00:49:21 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2008.61063 J 2008-Aug-10 00:49:21 LOG2 antvel: Computed apparent RA = 22:40:27.2 Dec = +16:01:48.3 2008-Aug-10 00:49:21 LOG2 antvel: Parameters to Doppler: Topocentric 17361 2008 223 0.0 2008-Aug-10 00:49:21 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-10 00:49:21 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2008-Aug-10 00:49:21 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2008-Aug-10 00:49:21 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-10 00:49:21 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-10 00:49:21 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Aug-10 00:49:21 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:49:21 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Aug-10 00:49:21 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-10 00:49:21 LOG5 begin_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2008-Aug-10 00:49:21 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 21.641588 2008.6106345539583 18.999933 2008-Aug-10 00:49:21 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666668 15.983333333333327 2008-Aug-10 00:49:21 LOG4 log_alfabeam: ALFABEAM 1 22.659309584178391 15.986651794944809 2008-Aug-10 00:49:21 LOG4 log_alfabeam: ALFABEAM 2 22.663127668911230 15.905531716901560 2008-Aug-10 00:49:21 LOG4 log_alfabeam: ALFABEAM 3 22.670481685516734 15.901784418260178 2008-Aug-10 00:49:21 LOG4 log_alfabeam: ALFABEAM 4 22.674025372499578 15.980196373162391 2008-Aug-10 00:49:21 LOG4 log_alfabeam: ALFABEAM 5 22.670180519919104 16.061601181908586 2008-Aug-10 00:49:21 LOG4 log_alfabeam: ALFABEAM 6 22.662818908642656 16.064308966439299 2008-Aug-10 00:49:21 INFO2 take_data: Starting WAPP+GALFA scan: 822300035 2008-Aug-10 00:49:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-10 00:49:22 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-10 00:49:22 LOG5 begin_task: Level: (4) ID = <10167> Status = 0 0 0 0 ok 2008-Aug-10 00:49:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-10 00:49:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Aug-10 00:49:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:49:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:49:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:49:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17363.00 2008-Aug-10 00:49:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-10 00:49:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:49:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:49:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:49:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:49:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:49:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:49:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:49:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:49:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-10 00:49:33 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-10 00:49:33 LOG5 end_task: Level: (4) ID = <10167> Status = 0 0 0 0 ok 2008-Aug-10 00:49:33 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-10 00:49:33 LOG5 end_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2008-Aug-10 00:49:33 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2008-Aug-10 00:49:33 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2008-Aug-10 00:49:33 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2008-Aug-10 00:49:33 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2008-Aug-10 00:49:33 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2008.61063 J 2008-Aug-10 00:49:33 LOG2 antvel: Computed apparent RA = 22:40:27.2 Dec = +16:01:48.3 2008-Aug-10 00:49:33 LOG2 antvel: Parameters to Doppler: Topocentric 17373 2008 223 0.0 2008-Aug-10 00:49:33 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-10 00:49:33 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2008-Aug-10 00:49:33 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2008-Aug-10 00:49:33 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-10 00:49:33 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-10 00:49:33 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Aug-10 00:49:33 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:49:33 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Aug-10 00:49:33 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-10 00:49:33 LOG5 begin_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2008-Aug-10 00:49:33 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 21.644931 2008.6106349342156 18.999933 2008-Aug-10 00:49:33 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666661 15.983333333333336 2008-Aug-10 00:49:33 LOG4 log_alfabeam: ALFABEAM 1 22.659309672258143 15.986691459090554 2008-Aug-10 00:49:33 LOG4 log_alfabeam: ALFABEAM 2 22.663125626675981 15.905551409570149 2008-Aug-10 00:49:33 LOG4 log_alfabeam: ALFABEAM 3 22.670479543129726 15.901763137614598 2008-Aug-10 00:49:33 LOG4 log_alfabeam: ALFABEAM 4 22.674025293830468 15.980157489169317 2008-Aug-10 00:49:33 LOG4 log_alfabeam: ALFABEAM 5 22.670182482847864 16.061583213559619 2008-Aug-10 00:49:33 LOG4 log_alfabeam: ALFABEAM 6 22.662820939285098 16.064328571116356 2008-Aug-10 00:49:33 INFO2 take_data: Starting WAPP+GALFA scan: 822300036 2008-Aug-10 00:49:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-10 00:49:34 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-10 00:49:34 LOG5 begin_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2008-Aug-10 00:49:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-10 00:49:34 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Aug-10 00:49:34 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:49:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:49:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:49:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17375.00 2008-Aug-10 00:49:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-10 00:49:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:49:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:49:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:49:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:49:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:49:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:49:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:49:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:49:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-10 00:49:45 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-10 00:49:45 LOG5 end_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2008-Aug-10 00:49:45 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-10 00:49:45 LOG5 end_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2008-Aug-10 00:49:45 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2008-Aug-10 00:49:45 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2008-Aug-10 00:49:45 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2008-Aug-10 00:49:45 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2008-Aug-10 00:49:45 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2008.61064 J 2008-Aug-10 00:49:45 LOG2 antvel: Computed apparent RA = 22:40:27.2 Dec = +16:01:48.3 2008-Aug-10 00:49:45 LOG2 antvel: Parameters to Doppler: Topocentric 17385 2008 223 0.0 2008-Aug-10 00:49:45 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-10 00:49:45 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2008-Aug-10 00:49:45 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2008-Aug-10 00:49:45 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-10 00:49:45 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-10 00:49:45 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Aug-10 00:49:45 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:49:45 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Aug-10 00:49:45 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-10 00:49:45 LOG5 begin_task: Level: (3) ID = <10170> Status = 0 0 0 0 ok 2008-Aug-10 00:49:45 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 21.648273 2008.6106353144726 18.999933 2008-Aug-10 00:49:45 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666668 15.983333333333333 2008-Aug-10 00:49:45 LOG4 log_alfabeam: ALFABEAM 1 22.659309762102847 15.986731451121123 2008-Aug-10 00:49:45 LOG4 log_alfabeam: ALFABEAM 2 22.663123568129276 15.905571275082481 2008-Aug-10 00:49:45 LOG4 log_alfabeam: ALFABEAM 3 22.670477382498145 15.901741694394675 2008-Aug-10 00:49:45 LOG4 log_alfabeam: ALFABEAM 4 22.674025213500101 15.980118281739440 2008-Aug-10 00:49:45 LOG4 log_alfabeam: ALFABEAM 5 22.670184461742643 16.061565083689739 2008-Aug-10 00:49:45 LOG4 log_alfabeam: ALFABEAM 6 22.662822987396559 16.064348330150512 2008-Aug-10 00:49:45 INFO2 take_data: Starting WAPP+GALFA scan: 822300037 2008-Aug-10 00:49:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-10 00:49:46 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-10 00:49:46 LOG5 begin_task: Level: (4) ID = <10171> Status = 0 0 0 0 ok 2008-Aug-10 00:49:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-10 00:49:46 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Aug-10 00:49:46 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:49:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:49:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:49:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17387.00 2008-Aug-10 00:49:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-10 00:49:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:49:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:49:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:49:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:49:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:49:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:49:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:49:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:49:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-10 00:49:57 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-10 00:49:57 LOG5 end_task: Level: (4) ID = <10171> Status = 0 0 0 0 ok 2008-Aug-10 00:49:57 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-10 00:49:57 LOG5 end_task: Level: (3) ID = <10170> Status = 0 0 0 0 ok 2008-Aug-10 00:49:57 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2008-Aug-10 00:49:57 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2008-Aug-10 00:49:57 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2008-Aug-10 00:49:57 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2008-Aug-10 00:49:57 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2008.61064 J 2008-Aug-10 00:49:57 LOG2 antvel: Computed apparent RA = 22:40:27.2 Dec = +16:01:48.3 2008-Aug-10 00:49:57 LOG2 antvel: Parameters to Doppler: Topocentric 17397 2008 223 0.0 2008-Aug-10 00:49:57 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-10 00:49:57 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2008-Aug-10 00:49:57 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2008-Aug-10 00:49:57 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-10 00:49:57 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-10 00:49:57 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Aug-10 00:49:57 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:49:57 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Aug-10 00:49:57 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-10 00:49:57 LOG5 begin_task: Level: (3) ID = <10172> Status = 0 0 0 0 ok 2008-Aug-10 00:49:57 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 21.651616 2008.6106356947296 18.999933 2008-Aug-10 00:49:57 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666661 15.983333333333345 2008-Aug-10 00:49:57 LOG4 log_alfabeam: ALFABEAM 1 22.659309853800238 15.986771798161554 2008-Aug-10 00:49:57 LOG4 log_alfabeam: ALFABEAM 2 22.663121491888429 15.905591327194308 2008-Aug-10 00:49:57 LOG4 log_alfabeam: ALFABEAM 3 22.670475202141759 15.901720074370845 2008-Aug-10 00:49:57 LOG4 log_alfabeam: ALFABEAM 4 22.674025131427971 15.980078724259517 2008-Aug-10 00:49:57 LOG4 log_alfabeam: ALFABEAM 5 22.670186457936136 16.061546779703534 2008-Aug-10 00:49:57 LOG4 log_alfabeam: ALFABEAM 6 22.662825054381248 16.064368256697939 2008-Aug-10 00:49:57 INFO2 take_data: Starting WAPP+GALFA scan: 822300038 2008-Aug-10 00:49:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-10 00:49:58 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-10 00:49:58 LOG5 begin_task: Level: (4) ID = <10173> Status = 0 0 0 0 ok 2008-Aug-10 00:49:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-10 00:49:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Aug-10 00:49:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:49:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:49:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:49:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17399.00 2008-Aug-10 00:50:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-10 00:50:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:50:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:50:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:50:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:50:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:50:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:50:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:50:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:50:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-10 00:50:09 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-10 00:50:09 LOG5 end_task: Level: (4) ID = <10173> Status = 0 0 0 0 ok 2008-Aug-10 00:50:09 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-10 00:50:09 LOG5 end_task: Level: (3) ID = <10172> Status = 0 0 0 0 ok 2008-Aug-10 00:50:09 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2008-Aug-10 00:50:09 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2008-Aug-10 00:50:09 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2008-Aug-10 00:50:09 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Aug-10 00:50:09 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Aug-10 00:50:09 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-10 00:50:09 LOG5 begin_task: Level: (3) ID = <10174> Status = 0 0 0 0 ok 2008-Aug-10 00:50:09 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-10 00:50:09 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-10 00:50:09 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-10 00:50:09 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-10 00:50:09 LOG5 end_task: Level: (3) ID = <10174> Status = 0 0 0 0 ok 2008-Aug-10 00:50:09 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2008-Aug-10 00:50:09 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2008-Aug-10 00:50:09 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2008-Aug-10 00:50:09 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2008-Aug-10 00:50:09 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2008-Aug-10 00:50:09 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2008.61064 J 2008-Aug-10 00:50:09 LOG2 antvel: Computed apparent RA = 22:40:27.2 Dec = +16:01:48.3 2008-Aug-10 00:50:09 LOG2 antvel: Parameters to Doppler: Topocentric 17409 2008 223 0.0 2008-Aug-10 00:50:09 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-10 00:50:09 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2008-Aug-10 00:50:09 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2008-Aug-10 00:50:09 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-10 00:50:09 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-10 00:50:09 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Aug-10 00:50:09 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:50:09 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Aug-10 00:50:09 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-10 00:50:09 LOG5 begin_task: Level: (3) ID = <10175> Status = 0 0 0 0 ok 2008-Aug-10 00:50:09 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 21.654958 2008.6106360749866 18.999933 2008-Aug-10 00:50:09 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666664 15.983333333333329 2008-Aug-10 00:50:09 LOG4 log_alfabeam: ALFABEAM 1 22.659309947330080 15.986812479304318 2008-Aug-10 00:50:09 LOG4 log_alfabeam: ALFABEAM 2 22.663119399043179 15.905611555801555 2008-Aug-10 00:50:09 LOG4 log_alfabeam: ALFABEAM 3 22.670473003175442 15.901698289066267 2008-Aug-10 00:50:09 LOG4 log_alfabeam: ALFABEAM 4 22.674025047630082 15.980038837207321 2008-Aug-10 00:50:09 LOG4 log_alfabeam: ALFABEAM 5 22.670188470384232 16.061528310782307 2008-Aug-10 00:50:09 LOG4 log_alfabeam: ALFABEAM 6 22.662827139183396 16.064388340182330 2008-Aug-10 00:50:09 INFO2 take_data: Starting WAPP+GALFA scan: 822300039 2008-Aug-10 00:50:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-10 00:50:10 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-10 00:50:10 LOG5 begin_task: Level: (4) ID = <10176> Status = 0 0 0 0 ok 2008-Aug-10 00:50:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-10 00:50:10 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Aug-10 00:50:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:50:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:50:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:50:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17411.00 2008-Aug-10 00:50:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-10 00:50:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:50:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:50:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:50:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:50:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:50:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:50:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:50:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:50:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-10 00:50:21 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-10 00:50:21 LOG5 end_task: Level: (4) ID = <10176> Status = 0 0 0 0 ok 2008-Aug-10 00:50:21 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-10 00:50:21 LOG5 end_task: Level: (3) ID = <10175> Status = 0 0 0 0 ok 2008-Aug-10 00:50:21 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2008-Aug-10 00:50:21 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2008-Aug-10 00:50:21 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2008-Aug-10 00:50:21 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2008-Aug-10 00:50:21 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2008.61064 J 2008-Aug-10 00:50:21 LOG2 antvel: Computed apparent RA = 22:40:27.2 Dec = +16:01:48.3 2008-Aug-10 00:50:21 LOG2 antvel: Parameters to Doppler: Topocentric 17421 2008 223 0.0 2008-Aug-10 00:50:21 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-10 00:50:21 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2008-Aug-10 00:50:21 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2008-Aug-10 00:50:21 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-10 00:50:21 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-10 00:50:21 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Aug-10 00:50:21 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:50:21 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Aug-10 00:50:21 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-10 00:50:21 LOG5 begin_task: Level: (3) ID = <10177> Status = 0 0 0 0 ok 2008-Aug-10 00:50:21 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 21.658301 2008.6106364552438 18.999933 2008-Aug-10 00:50:21 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666664 15.983333333333333 2008-Aug-10 00:50:21 LOG4 log_alfabeam: ALFABEAM 1 22.659310042783627 15.986853522167321 2008-Aug-10 00:50:21 LOG4 log_alfabeam: ALFABEAM 2 22.663117288186736 15.905631974929550 2008-Aug-10 00:50:21 LOG4 log_alfabeam: ALFABEAM 3 22.670470784091030 15.901676324016778 2008-Aug-10 00:50:21 LOG4 log_alfabeam: ALFABEAM 4 22.674024962022557 15.979998593483421 2008-Aug-10 00:50:21 LOG4 log_alfabeam: ALFABEAM 5 22.670190500443240 16.061509664078766 2008-Aug-10 00:50:21 LOG4 log_alfabeam: ALFABEAM 6 22.662829243233894 16.064408593982751 2008-Aug-10 00:50:21 INFO2 take_data: Starting WAPP+GALFA scan: 822300040 2008-Aug-10 00:50:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-10 00:50:22 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-10 00:50:22 LOG5 begin_task: Level: (4) ID = <10178> Status = 0 0 0 0 ok 2008-Aug-10 00:50:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-10 00:50:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Aug-10 00:50:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:50:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:50:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:50:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17423.00 2008-Aug-10 00:50:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-10 00:50:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:50:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:50:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:50:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:50:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:50:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:50:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:50:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:50:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-10 00:50:33 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-10 00:50:33 LOG5 end_task: Level: (4) ID = <10178> Status = 0 0 0 0 ok 2008-Aug-10 00:50:33 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-10 00:50:33 LOG5 end_task: Level: (3) ID = <10177> Status = 0 0 0 0 ok 2008-Aug-10 00:50:33 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2008-Aug-10 00:50:33 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2008-Aug-10 00:50:33 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2008-Aug-10 00:50:33 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2008-Aug-10 00:50:33 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2008.61064 J 2008-Aug-10 00:50:33 LOG2 antvel: Computed apparent RA = 22:40:27.2 Dec = +16:01:48.3 2008-Aug-10 00:50:33 LOG2 antvel: Parameters to Doppler: Topocentric 17433 2008 223 0.0 2008-Aug-10 00:50:33 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-10 00:50:33 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2008-Aug-10 00:50:33 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2008-Aug-10 00:50:33 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-10 00:50:33 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-10 00:50:33 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Aug-10 00:50:33 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:50:33 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Aug-10 00:50:33 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-10 00:50:33 LOG5 begin_task: Level: (3) ID = <10179> Status = 0 0 0 0 ok 2008-Aug-10 00:50:33 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 21.661643 2008.6106368355008 18.999933 2008-Aug-10 00:50:33 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666664 15.983333333333329 2008-Aug-10 00:50:33 LOG4 log_alfabeam: ALFABEAM 1 22.659310140139780 15.986894905508322 2008-Aug-10 00:50:33 LOG4 log_alfabeam: ALFABEAM 2 22.663115160425903 15.905652574307776 2008-Aug-10 00:50:33 LOG4 log_alfabeam: ALFABEAM 3 22.670468546021471 15.901654190921761 2008-Aug-10 00:50:33 LOG4 log_alfabeam: ALFABEAM 4 22.674024874622237 15.979958013895644 2008-Aug-10 00:50:33 LOG4 log_alfabeam: ALFABEAM 5 22.670192547052377 16.061490848929516 2008-Aug-10 00:50:33 LOG4 log_alfabeam: ALFABEAM 6 22.662831365459606 16.064429007356178 2008-Aug-10 00:50:33 INFO2 take_data: Starting WAPP+GALFA scan: 822300041 2008-Aug-10 00:50:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-10 00:50:34 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-10 00:50:34 LOG5 begin_task: Level: (4) ID = <10180> Status = 0 0 0 0 ok 2008-Aug-10 00:50:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-10 00:50:34 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Aug-10 00:50:34 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:50:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:50:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:50:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17435.00 2008-Aug-10 00:50:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-10 00:50:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:50:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:50:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:50:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:50:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:50:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:50:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:50:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:50:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-10 00:50:45 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-10 00:50:45 LOG5 end_task: Level: (4) ID = <10180> Status = 0 0 0 0 ok 2008-Aug-10 00:50:45 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-10 00:50:45 LOG5 end_task: Level: (3) ID = <10179> Status = 0 0 0 0 ok 2008-Aug-10 00:50:45 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2008-Aug-10 00:50:45 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2008-Aug-10 00:50:45 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2008-Aug-10 00:50:45 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2008-Aug-10 00:50:45 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2008.61064 J 2008-Aug-10 00:50:45 LOG2 antvel: Computed apparent RA = 22:40:27.2 Dec = +16:01:48.3 2008-Aug-10 00:50:45 LOG2 antvel: Parameters to Doppler: Topocentric 17445 2008 223 0.0 2008-Aug-10 00:50:45 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-10 00:50:45 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2008-Aug-10 00:50:45 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2008-Aug-10 00:50:45 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-10 00:50:45 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-10 00:50:45 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Aug-10 00:50:45 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:50:45 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Aug-10 00:50:45 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-10 00:50:45 LOG5 begin_task: Level: (3) ID = <10181> Status = 0 0 0 0 ok 2008-Aug-10 00:50:45 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 21.664986 2008.6106372157578 18.999933 2008-Aug-10 00:50:45 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666664 15.983333333333320 2008-Aug-10 00:50:45 LOG4 log_alfabeam: ALFABEAM 1 22.659310239493490 15.986936657448338 2008-Aug-10 00:50:45 LOG4 log_alfabeam: ALFABEAM 2 22.663113014329355 15.905673368237510 2008-Aug-10 00:50:45 LOG4 log_alfabeam: ALFABEAM 3 22.670466287430081 15.901631875078310 2008-Aug-10 00:50:45 LOG4 log_alfabeam: ALFABEAM 4 22.674024785341718 15.979917070848156 2008-Aug-10 00:50:45 LOG4 log_alfabeam: ALFABEAM 5 22.670194611592066 16.061471852229282 2008-Aug-10 00:50:45 LOG4 log_alfabeam: ALFABEAM 6 22.662833507318734 16.064449593908424 2008-Aug-10 00:50:45 INFO2 take_data: Starting WAPP+GALFA scan: 822300042 2008-Aug-10 00:50:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-10 00:50:46 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-10 00:50:46 LOG5 begin_task: Level: (4) ID = <10182> Status = 0 0 0 0 ok 2008-Aug-10 00:50:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-10 00:50:46 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Aug-10 00:50:46 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:50:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:50:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:50:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17447.00 2008-Aug-10 00:50:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-10 00:50:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:50:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:50:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:50:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:50:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:50:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:50:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:50:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:50:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-10 00:50:57 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-10 00:50:57 LOG5 end_task: Level: (4) ID = <10182> Status = 0 0 0 0 ok 2008-Aug-10 00:50:57 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-10 00:50:57 LOG5 end_task: Level: (3) ID = <10181> Status = 0 0 0 0 ok 2008-Aug-10 00:50:57 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2008-Aug-10 00:50:57 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2008-Aug-10 00:50:57 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2008-Aug-10 00:50:57 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2008-Aug-10 00:50:57 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2008.61064 J 2008-Aug-10 00:50:57 LOG2 antvel: Computed apparent RA = 22:40:27.2 Dec = +16:01:48.3 2008-Aug-10 00:50:57 LOG2 antvel: Parameters to Doppler: Topocentric 17457 2008 223 0.0 2008-Aug-10 00:50:57 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-10 00:50:57 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2008-Aug-10 00:50:57 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2008-Aug-10 00:50:57 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-10 00:50:57 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-10 00:50:57 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Aug-10 00:50:57 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:50:57 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Aug-10 00:50:57 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-10 00:50:57 LOG5 begin_task: Level: (3) ID = <10183> Status = 0 0 0 0 ok 2008-Aug-10 00:50:57 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 21.668328 2008.6106375960148 18.999933 2008-Aug-10 00:50:57 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666664 15.983333333333333 2008-Aug-10 00:50:57 LOG4 log_alfabeam: ALFABEAM 1 22.659310340822731 15.986978756405112 2008-Aug-10 00:50:57 LOG4 log_alfabeam: ALFABEAM 2 22.663110851021262 15.905694346279065 2008-Aug-10 00:50:57 LOG4 log_alfabeam: ALFABEAM 3 22.670464009468212 15.901609388364736 2008-Aug-10 00:50:57 LOG4 log_alfabeam: ALFABEAM 4 22.674024694198685 15.979875785484037 2008-Aug-10 00:50:57 LOG4 log_alfabeam: ALFABEAM 5 22.670196692984579 16.061452683472520 2008-Aug-10 00:50:57 LOG4 log_alfabeam: ALFABEAM 6 22.662835667720511 16.064470342727226 2008-Aug-10 00:50:57 INFO2 take_data: Starting WAPP+GALFA scan: 822300043 2008-Aug-10 00:50:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-10 00:50:58 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-10 00:50:58 LOG5 begin_task: Level: (4) ID = <10184> Status = 0 0 0 0 ok 2008-Aug-10 00:50:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-10 00:50:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Aug-10 00:50:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:50:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:50:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:50:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17459.00 2008-Aug-10 00:51:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-10 00:51:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:51:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:51:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:51:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:51:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:51:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:51:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:51:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:51:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-10 00:51:09 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-10 00:51:09 LOG5 end_task: Level: (4) ID = <10184> Status = 0 0 0 0 ok 2008-Aug-10 00:51:09 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-10 00:51:09 LOG5 end_task: Level: (3) ID = <10183> Status = 0 0 0 0 ok 2008-Aug-10 00:51:09 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2008-Aug-10 00:51:09 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2008-Aug-10 00:51:09 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2008-Aug-10 00:51:09 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2008-Aug-10 00:51:09 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2008.61064 J 2008-Aug-10 00:51:09 LOG2 antvel: Computed apparent RA = 22:40:27.2 Dec = +16:01:48.3 2008-Aug-10 00:51:09 LOG2 antvel: Parameters to Doppler: Topocentric 17469 2008 223 0.0 2008-Aug-10 00:51:09 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-10 00:51:09 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2008-Aug-10 00:51:09 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2008-Aug-10 00:51:09 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-10 00:51:09 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-10 00:51:09 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Aug-10 00:51:09 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:51:09 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Aug-10 00:51:09 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-10 00:51:09 LOG5 begin_task: Level: (3) ID = <10185> Status = 0 0 0 0 ok 2008-Aug-10 00:51:09 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 21.671671 2008.6106379762718 18.999933 2008-Aug-10 00:51:09 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666664 15.983333333333336 2008-Aug-10 00:51:09 LOG4 log_alfabeam: ALFABEAM 1 22.659310444226293 15.987021231013426 2008-Aug-10 00:51:09 LOG4 log_alfabeam: ALFABEAM 2 22.663108669045240 15.905715523016191 2008-Aug-10 00:51:09 LOG4 log_alfabeam: ALFABEAM 3 22.670461710569963 15.901586715835094 2008-Aug-10 00:51:09 LOG4 log_alfabeam: ALFABEAM 4 22.674024601102108 15.979834129700661 2008-Aug-10 00:51:09 LOG4 log_alfabeam: ALFABEAM 5 22.670198792634888 16.061433329289954 2008-Aug-10 00:51:09 LOG4 log_alfabeam: ALFABEAM 6 22.662837848151053 16.064491267649302 2008-Aug-10 00:51:09 INFO2 take_data: Starting WAPP+GALFA scan: 822300044 2008-Aug-10 00:51:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-10 00:51:10 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-10 00:51:10 LOG5 begin_task: Level: (4) ID = <10186> Status = 0 0 0 0 ok 2008-Aug-10 00:51:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-10 00:51:10 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Aug-10 00:51:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:51:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:51:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:51:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17471.00 2008-Aug-10 00:51:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-10 00:51:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:51:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:51:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:51:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:51:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:51:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:51:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:51:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:51:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-10 00:51:21 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-10 00:51:21 LOG5 end_task: Level: (4) ID = <10186> Status = 0 0 0 0 ok 2008-Aug-10 00:51:21 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-10 00:51:21 LOG5 end_task: Level: (3) ID = <10185> Status = 0 0 0 0 ok 2008-Aug-10 00:51:21 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2008-Aug-10 00:51:21 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2008-Aug-10 00:51:21 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2008-Aug-10 00:51:21 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2008-Aug-10 00:51:21 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2008.61064 J 2008-Aug-10 00:51:21 LOG2 antvel: Computed apparent RA = 22:40:27.2 Dec = +16:01:48.3 2008-Aug-10 00:51:21 LOG2 antvel: Parameters to Doppler: Topocentric 17481 2008 223 0.0 2008-Aug-10 00:51:21 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-10 00:51:21 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2008-Aug-10 00:51:21 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2008-Aug-10 00:51:21 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-10 00:51:21 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-10 00:51:21 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Aug-10 00:51:21 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:51:21 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Aug-10 00:51:21 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-10 00:51:21 LOG5 begin_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2008-Aug-10 00:51:21 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 21.675013 2008.6106383565291 18.999933 2008-Aug-10 00:51:21 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666661 15.983333333333329 2008-Aug-10 00:51:21 LOG4 log_alfabeam: ALFABEAM 1 22.659310549681194 15.987064059345443 2008-Aug-10 00:51:21 LOG4 log_alfabeam: ALFABEAM 2 22.663106469543081 15.905736887837074 2008-Aug-10 00:51:21 LOG4 log_alfabeam: ALFABEAM 3 22.670459391905403 15.901563869549310 2008-Aug-10 00:51:21 LOG4 log_alfabeam: ALFABEAM 4 22.674024506070495 15.979792124981715 2008-Aug-10 00:51:21 LOG4 log_alfabeam: ALFABEAM 5 22.670200909448088 16.061413799336471 2008-Aug-10 00:51:21 LOG4 log_alfabeam: ALFABEAM 6 22.662840047501621 16.064512357590448 2008-Aug-10 00:51:21 INFO2 take_data: Starting WAPP+GALFA scan: 822300045 2008-Aug-10 00:51:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-10 00:51:22 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-10 00:51:22 LOG5 begin_task: Level: (4) ID = <10188> Status = 0 0 0 0 ok 2008-Aug-10 00:51:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-10 00:51:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Aug-10 00:51:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:51:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:51:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:51:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17483.00 2008-Aug-10 00:51:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-10 00:51:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:51:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:51:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:51:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:51:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:51:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:51:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:51:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:51:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-10 00:51:33 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-10 00:51:33 LOG5 end_task: Level: (4) ID = <10188> Status = 0 0 0 0 ok 2008-Aug-10 00:51:33 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-10 00:51:33 LOG5 end_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2008-Aug-10 00:51:33 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2008-Aug-10 00:51:33 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Aug-10 00:51:33 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Aug-10 00:51:33 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-10 00:51:33 LOG5 begin_task: Level: (3) ID = <10189> Status = 0 0 0 0 ok 2008-Aug-10 00:51:33 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-10 00:51:33 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Aug-10 00:51:33 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-10 00:51:33 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-10 00:51:33 LOG5 end_task: Level: (3) ID = <10189> Status = 0 0 0 0 ok 2008-Aug-10 00:51:33 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2008-Aug-10 00:51:33 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2008-Aug-10 00:51:33 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2008-Aug-10 00:51:33 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2008-Aug-10 00:51:33 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2008.61064 J 2008-Aug-10 00:51:33 LOG2 antvel: Computed apparent RA = 22:40:27.2 Dec = +16:01:48.3 2008-Aug-10 00:51:33 LOG2 antvel: Parameters to Doppler: Topocentric 17493 2008 223 0.0 2008-Aug-10 00:51:33 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-10 00:51:33 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2008-Aug-10 00:51:33 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2008-Aug-10 00:51:33 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-10 00:51:33 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-10 00:51:33 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Aug-10 00:51:33 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:51:33 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Aug-10 00:51:33 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-10 00:51:33 LOG5 begin_task: Level: (3) ID = <10190> Status = 0 0 0 0 ok 2008-Aug-10 00:51:33 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 21.678355 2008.6106387367861 18.999933 2008-Aug-10 00:51:33 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666664 15.983333333333345 2008-Aug-10 00:51:33 LOG4 log_alfabeam: ALFABEAM 1 22.659310657257723 15.987107257579078 2008-Aug-10 00:51:33 LOG4 log_alfabeam: ALFABEAM 2 22.663104251699270 15.905758449133689 2008-Aug-10 00:51:33 LOG4 log_alfabeam: ALFABEAM 3 22.670457052581877 15.901540841232142 2008-Aug-10 00:51:33 LOG4 log_alfabeam: ALFABEAM 4 22.674024409038399 15.979749755439844 2008-Aug-10 00:51:33 LOG4 log_alfabeam: ALFABEAM 5 22.670203044212737 16.061394085898723 2008-Aug-10 00:51:33 LOG4 log_alfabeam: ALFABEAM 6 22.662842266619929 16.064533620234226 2008-Aug-10 00:51:33 INFO2 take_data: Starting WAPP+GALFA scan: 822300046 2008-Aug-10 00:51:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-10 00:51:34 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-10 00:51:34 LOG5 begin_task: Level: (4) ID = <10191> Status = 0 0 0 0 ok 2008-Aug-10 00:51:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-10 00:51:34 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Aug-10 00:51:34 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:51:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:51:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:51:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17495.00 2008-Aug-10 00:51:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-10 00:51:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:51:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:51:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:51:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:51:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:51:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:51:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:51:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:51:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-10 00:51:45 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-10 00:51:45 LOG5 end_task: Level: (4) ID = <10191> Status = 0 0 0 0 ok 2008-Aug-10 00:51:45 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-10 00:51:45 LOG5 end_task: Level: (3) ID = <10190> Status = 0 0 0 0 ok 2008-Aug-10 00:51:45 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2008-Aug-10 00:51:45 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2008-Aug-10 00:51:45 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2008-Aug-10 00:51:45 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2008-Aug-10 00:51:45 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2008.61064 J 2008-Aug-10 00:51:45 LOG2 antvel: Computed apparent RA = 22:40:27.2 Dec = +16:01:48.3 2008-Aug-10 00:51:45 LOG2 antvel: Parameters to Doppler: Topocentric 17505 2008 223 0.0 2008-Aug-10 00:51:45 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-10 00:51:45 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2008-Aug-10 00:51:45 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2008-Aug-10 00:51:45 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-10 00:51:45 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-10 00:51:45 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Aug-10 00:51:45 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:51:45 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Aug-10 00:51:45 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-10 00:51:45 LOG5 begin_task: Level: (3) ID = <10192> Status = 0 0 0 0 ok 2008-Aug-10 00:51:45 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 21.681698 2008.6106391170431 18.999933 2008-Aug-10 00:51:45 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666661 15.983333333333329 2008-Aug-10 00:51:45 LOG4 log_alfabeam: ALFABEAM 1 22.659310767029460 15.987150842380141 2008-Aug-10 00:51:45 LOG4 log_alfabeam: ALFABEAM 2 22.663102014674337 15.905780215562832 2008-Aug-10 00:51:45 LOG4 log_alfabeam: ALFABEAM 3 22.670454691679183 15.901517622373975 2008-Aug-10 00:51:45 LOG4 log_alfabeam: ALFABEAM 4 22.674024309937192 15.979707004706302 2008-Aug-10 00:51:45 LOG4 log_alfabeam: ALFABEAM 5 22.670205197740859 16.061374181015804 2008-Aug-10 00:51:45 LOG4 log_alfabeam: ALFABEAM 6 22.662844506379962 16.064555063486633 2008-Aug-10 00:51:45 INFO2 take_data: Starting WAPP+GALFA scan: 822300047 2008-Aug-10 00:51:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-10 00:51:46 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-10 00:51:46 LOG5 begin_task: Level: (4) ID = <10193> Status = 0 0 0 0 ok 2008-Aug-10 00:51:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-10 00:51:46 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Aug-10 00:51:46 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:51:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:51:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:51:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17507.00 2008-Aug-10 00:51:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-10 00:51:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:51:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:51:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:51:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:51:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:51:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:51:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:51:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:51:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-10 00:51:57 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-10 00:51:57 LOG5 end_task: Level: (4) ID = <10193> Status = 0 0 0 0 ok 2008-Aug-10 00:51:57 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-10 00:51:57 LOG5 end_task: Level: (3) ID = <10192> Status = 0 0 0 0 ok 2008-Aug-10 00:51:57 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2008-Aug-10 00:51:57 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2008-Aug-10 00:51:57 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2008-Aug-10 00:51:57 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2008-Aug-10 00:51:57 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2008.61064 J 2008-Aug-10 00:51:57 LOG2 antvel: Computed apparent RA = 22:40:27.2 Dec = +16:01:48.3 2008-Aug-10 00:51:57 LOG2 antvel: Parameters to Doppler: Topocentric 17517 2008 223 0.0 2008-Aug-10 00:51:57 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-10 00:51:57 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2008-Aug-10 00:51:57 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2008-Aug-10 00:51:57 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-10 00:51:57 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-10 00:51:57 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Aug-10 00:51:57 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:51:57 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Aug-10 00:51:57 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-10 00:51:57 LOG5 begin_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2008-Aug-10 00:51:57 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 21.685040 2008.6106394973001 18.999933 2008-Aug-10 00:51:57 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666661 15.983333333333336 2008-Aug-10 00:51:57 LOG4 log_alfabeam: ALFABEAM 1 22.659310878971976 15.987194791292016 2008-Aug-10 00:51:57 LOG4 log_alfabeam: ALFABEAM 2 22.663099759637049 15.905802176248994 2008-Aug-10 00:51:57 LOG4 log_alfabeam: ALFABEAM 3 22.670452310396016 15.901494225312526 2008-Aug-10 00:51:57 LOG4 log_alfabeam: ALFABEAM 4 22.674024208786729 15.979663894786242 2008-Aug-10 00:51:57 LOG4 log_alfabeam: ALFABEAM 5 22.670207368911242 16.061354094588616 2008-Aug-10 00:51:57 LOG4 log_alfabeam: ALFABEAM 6 22.662846765645558 16.064576676000719 2008-Aug-10 00:51:57 INFO2 take_data: Starting WAPP+GALFA scan: 822300048 2008-Aug-10 00:51:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-10 00:51:58 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-10 00:51:58 LOG5 begin_task: Level: (4) ID = <10195> Status = 0 0 0 0 ok 2008-Aug-10 00:51:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-10 00:51:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Aug-10 00:51:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:51:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:51:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:51:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17519.00 2008-Aug-10 00:52:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-10 00:52:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:52:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:52:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:52:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:52:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:52:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:52:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:52:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:52:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-10 00:52:09 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-10 00:52:09 LOG5 end_task: Level: (4) ID = <10195> Status = 0 0 0 0 ok 2008-Aug-10 00:52:09 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-10 00:52:09 LOG5 end_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2008-Aug-10 00:52:09 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2008-Aug-10 00:52:09 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2008-Aug-10 00:52:09 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2008-Aug-10 00:52:09 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2008-Aug-10 00:52:09 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2008.61064 J 2008-Aug-10 00:52:09 LOG2 antvel: Computed apparent RA = 22:40:27.2 Dec = +16:01:48.3 2008-Aug-10 00:52:09 LOG2 antvel: Parameters to Doppler: Topocentric 17529 2008 223 0.0 2008-Aug-10 00:52:09 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-10 00:52:09 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2008-Aug-10 00:52:09 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2008-Aug-10 00:52:09 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-10 00:52:09 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-10 00:52:09 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Aug-10 00:52:09 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:52:09 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Aug-10 00:52:09 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-10 00:52:09 LOG5 begin_task: Level: (3) ID = <10196> Status = 0 0 0 0 ok 2008-Aug-10 00:52:09 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 21.688383 2008.6106398775571 18.999933 2008-Aug-10 00:52:09 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666664 15.983333333333327 2008-Aug-10 00:52:09 LOG4 log_alfabeam: ALFABEAM 1 22.659310993194332 15.987239134282348 2008-Aug-10 00:52:09 LOG4 log_alfabeam: ALFABEAM 2 22.663097485066221 15.905824346512661 2008-Aug-10 00:52:09 LOG4 log_alfabeam: ALFABEAM 3 22.670449907090571 15.901470634475050 2008-Aug-10 00:52:09 LOG4 log_alfabeam: ALFABEAM 4 22.674024105486225 15.979620396262034 2008-Aug-10 00:52:09 LOG4 log_alfabeam: ALFABEAM 5 22.670209559192450 16.061333812559255 2008-Aug-10 00:52:09 LOG4 log_alfabeam: ALFABEAM 6 22.662849045975424 16.064598472208846 2008-Aug-10 00:52:09 INFO2 take_data: Starting WAPP+GALFA scan: 822300049 2008-Aug-10 00:52:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-10 00:52:10 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-10 00:52:10 LOG5 begin_task: Level: (4) ID = <10197> Status = 0 0 0 0 ok 2008-Aug-10 00:52:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-10 00:52:10 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Aug-10 00:52:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:52:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:52:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:52:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17531.00 2008-Aug-10 00:52:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-10 00:52:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:52:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:52:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:52:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:52:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:52:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:52:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:52:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:52:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-10 00:52:21 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-10 00:52:21 LOG5 end_task: Level: (4) ID = <10197> Status = 0 0 0 0 ok 2008-Aug-10 00:52:21 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-10 00:52:21 LOG5 end_task: Level: (3) ID = <10196> Status = 0 0 0 0 ok 2008-Aug-10 00:52:21 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2008-Aug-10 00:52:21 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2008-Aug-10 00:52:21 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2008-Aug-10 00:52:21 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2008-Aug-10 00:52:21 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2008.61064 J 2008-Aug-10 00:52:21 LOG2 antvel: Computed apparent RA = 22:40:27.2 Dec = +16:01:48.3 2008-Aug-10 00:52:21 LOG2 antvel: Parameters to Doppler: Topocentric 17541 2008 223 0.0 2008-Aug-10 00:52:21 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-10 00:52:21 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2008-Aug-10 00:52:21 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2008-Aug-10 00:52:21 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-10 00:52:21 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-10 00:52:21 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Aug-10 00:52:21 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:52:21 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Aug-10 00:52:21 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-10 00:52:21 LOG5 begin_task: Level: (3) ID = <10198> Status = 0 0 0 0 ok 2008-Aug-10 00:52:21 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 21.691725 2008.6106402578143 18.999933 2008-Aug-10 00:52:21 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666661 15.983333333333333 2008-Aug-10 00:52:21 LOG4 log_alfabeam: ALFABEAM 1 22.659311109671101 15.987283848534810 2008-Aug-10 00:52:21 LOG4 log_alfabeam: ALFABEAM 2 22.663095192148937 15.905846715298791 2008-Aug-10 00:52:21 LOG4 log_alfabeam: ALFABEAM 3 22.670447482981029 15.901446862388010 2008-Aug-10 00:52:21 LOG4 log_alfabeam: ALFABEAM 4 22.674024000056445 15.979576531493411 2008-Aug-10 00:52:21 LOG4 log_alfabeam: ALFABEAM 5 22.670211767445362 16.061313344996080 2008-Aug-10 00:52:21 LOG4 log_alfabeam: ALFABEAM 6 22.662851346214687 16.064620440585433 2008-Aug-10 00:52:21 INFO2 take_data: Starting WAPP+GALFA scan: 822300050 2008-Aug-10 00:52:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-10 00:52:22 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-10 00:52:22 LOG5 begin_task: Level: (4) ID = <10199> Status = 0 0 0 0 ok 2008-Aug-10 00:52:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-10 00:52:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Aug-10 00:52:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:52:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:52:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:52:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17543.00 2008-Aug-10 00:52:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-10 00:52:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:52:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:52:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:52:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:52:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:52:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:52:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:52:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:52:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-10 00:52:33 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-10 00:52:33 LOG5 end_task: Level: (4) ID = <10199> Status = 0 0 0 0 ok 2008-Aug-10 00:52:33 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-10 00:52:33 LOG5 end_task: Level: (3) ID = <10198> Status = 0 0 0 0 ok 2008-Aug-10 00:52:33 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2008-Aug-10 00:52:33 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2008-Aug-10 00:52:33 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2008-Aug-10 00:52:33 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2008-Aug-10 00:52:33 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2008.61064 J 2008-Aug-10 00:52:33 LOG2 antvel: Computed apparent RA = 22:40:27.2 Dec = +16:01:48.3 2008-Aug-10 00:52:33 LOG2 antvel: Parameters to Doppler: Topocentric 17553 2008 223 0.0 2008-Aug-10 00:52:33 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-10 00:52:33 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2008-Aug-10 00:52:33 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2008-Aug-10 00:52:33 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-10 00:52:33 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-10 00:52:33 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Aug-10 00:52:33 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:52:33 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Aug-10 00:52:33 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-10 00:52:33 LOG5 begin_task: Level: (3) ID = <10200> Status = 0 0 0 0 ok 2008-Aug-10 00:52:33 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 21.695068 2008.6106406380713 18.999933 2008-Aug-10 00:52:33 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666661 15.983333333333340 2008-Aug-10 00:52:33 LOG4 log_alfabeam: ALFABEAM 1 22.659311228515719 15.987328964570491 2008-Aug-10 00:52:33 LOG4 log_alfabeam: ALFABEAM 2 22.663092879337189 15.905869298235240 2008-Aug-10 00:52:33 LOG4 log_alfabeam: ALFABEAM 3 22.670445036393971 15.901422893220058 2008-Aug-10 00:52:33 LOG4 log_alfabeam: ALFABEAM 4 22.674023892392427 15.979532270516824 2008-Aug-10 00:52:33 LOG4 log_alfabeam: ALFABEAM 5 22.670213995164911 16.061292677553894 2008-Aug-10 00:52:33 LOG4 log_alfabeam: ALFABEAM 6 22.662853667952252 16.064642595808781 2008-Aug-10 00:52:33 INFO2 take_data: Starting WAPP+GALFA scan: 822300051 2008-Aug-10 00:52:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-10 00:52:34 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-10 00:52:34 LOG5 begin_task: Level: (4) ID = <10201> Status = 0 0 0 0 ok 2008-Aug-10 00:52:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-10 00:52:34 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Aug-10 00:52:34 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:52:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:52:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:52:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17555.00 2008-Aug-10 00:52:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-10 00:52:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:52:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:52:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:52:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:52:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:52:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:52:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:52:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:52:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-10 00:52:45 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-10 00:52:45 LOG5 end_task: Level: (4) ID = <10201> Status = 0 0 0 0 ok 2008-Aug-10 00:52:45 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-10 00:52:45 LOG5 end_task: Level: (3) ID = <10200> Status = 0 0 0 0 ok 2008-Aug-10 00:52:45 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2008-Aug-10 00:52:45 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2008-Aug-10 00:52:45 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2008-Aug-10 00:52:45 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2008-Aug-10 00:52:45 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2008.61064 J 2008-Aug-10 00:52:45 LOG2 antvel: Computed apparent RA = 22:40:27.2 Dec = +16:01:48.3 2008-Aug-10 00:52:45 LOG2 antvel: Parameters to Doppler: Topocentric 17565 2008 223 0.0 2008-Aug-10 00:52:45 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-10 00:52:45 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2008-Aug-10 00:52:45 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2008-Aug-10 00:52:45 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-10 00:52:45 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-10 00:52:45 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Aug-10 00:52:45 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:52:45 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Aug-10 00:52:45 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-10 00:52:45 LOG5 begin_task: Level: (3) ID = <10202> Status = 0 0 0 0 ok 2008-Aug-10 00:52:45 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 21.698410 2008.6106410183284 18.999933 2008-Aug-10 00:52:45 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666668 15.983333333333327 2008-Aug-10 00:52:45 LOG4 log_alfabeam: ALFABEAM 1 22.659311349701746 15.987374459207389 2008-Aug-10 00:52:45 LOG4 log_alfabeam: ALFABEAM 2 22.663090547836717 15.905892084084295 2008-Aug-10 00:52:45 LOG4 log_alfabeam: ALFABEAM 3 22.670442568567431 15.901398739689229 2008-Aug-10 00:52:45 LOG4 log_alfabeam: ALFABEAM 4 22.674023782515913 15.979487636052424 2008-Aug-10 00:52:45 LOG4 log_alfabeam: ALFABEAM 5 22.670216241193806 16.061271820471301 2008-Aug-10 00:52:45 LOG4 log_alfabeam: ALFABEAM 6 22.662856010014284 16.064664926171879 2008-Aug-10 00:52:45 INFO2 take_data: Starting WAPP+GALFA scan: 822300052 2008-Aug-10 00:52:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-10 00:52:46 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-10 00:52:46 LOG5 begin_task: Level: (4) ID = <10203> Status = 0 0 0 0 ok 2008-Aug-10 00:52:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-10 00:52:46 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Aug-10 00:52:46 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:52:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:52:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:52:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17567.00 2008-Aug-10 00:52:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-10 00:52:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:52:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:52:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:52:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:52:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:52:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:52:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:52:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 00:52:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-10 00:52:57 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-10 00:52:57 LOG5 end_task: Level: (4) ID = <10203> Status = 0 0 0 0 ok 2008-Aug-10 00:52:57 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-10 00:52:57 LOG5 end_task: Level: (3) ID = <10202> Status = 0 0 0 0 ok 2008-Aug-10 00:52:57 INFO2 smartfreq: Switching off CAL 2008-Aug-10 00:52:57 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Aug-10 00:52:57 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Aug-10 00:52:57 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-10 00:52:57 LOG5 begin_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2008-Aug-10 00:52:57 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-10 00:52:57 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-10 00:52:57 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-10 00:52:57 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-10 00:52:57 LOG5 end_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2008-Aug-10 00:52:57 INFO3 restore_frequencies: Restoring original frequencies 2008-Aug-10 00:52:57 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2008-Aug-10 00:52:57 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2008.61064 J 2008-Aug-10 00:52:57 LOG2 antvel: Computed apparent RA = 22:40:27.2 Dec = +16:01:48.3 2008-Aug-10 00:52:57 LOG2 antvel: Parameters to Doppler: Topocentric 17577 2008 223 0.0 2008-Aug-10 00:52:57 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-10 00:52:57 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.2 rest0=1381.2 rest1=1381.2 rest2=1381.2 rest3=1381.2 rest4=1381.2 rest5=1381.2 rest6=1381.2 rest7=1381.2 2008-Aug-10 00:52:57 INFO4 dopset_gen: New sky frequencies: 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 2008-Aug-10 00:52:57 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.200000 sky0=1381.200000 sky1=1381.200000 sky2=1381.200000 sky3=1381.200000 sky4=1381.200000 sky5=1381.200000 sky6=1381.200000 sky7=1381.200000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-10 00:52:57 LOG2 dopset_gen: Result from 'sky2syn': 1631.200000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-10 00:52:57 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2008-Aug-10 00:52:57 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:52:57 STOP finish_task: Finishing task 'smart frequency switching' 2008-Aug-10 00:52:57 LOG5 finish_task: Level: (2) ID = <10135> Status = 0 0 0 0 ok 2008-Aug-10 00:52:57 DONE finish_task: DONE finished pattern: smart frequency switching 2008-Aug-10 00:52:57 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Aug-10 00:52:57 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2008-Aug-10 00:52:57 LOG5 end_task: Level: (2) ID = <10135> Status = 0 0 0 0 ok 2008-Aug-10 00:52:57 NOTE run_command_file: DONE with command file processing 2008-Aug-10 00:52:57 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2008-Aug-10 00:52:58 STOP finish_task: Finishing task 'running command file 'command_galfasrc.cmd'' 2008-Aug-10 00:52:58 LOG5 finish_task: Level: (1) ID = <10119> Status = 0 0 0 0 ok 2008-Aug-10 00:52:58 DONE finish_task: DONE finished running: command file 'command_galfasrc.cmd' 2008-Aug-10 00:52:58 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Aug-10 00:52:58 END end_task: Finishing task 'running command file 'command_galfasrc.cmd'' with status 'OK' 2008-Aug-10 00:52:58 LOG5 end_task: Level: (1) ID = <10119> Status = 0 0 0 0 ok 2008-Aug-10 00:52:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2008-Aug-10 00:52:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:52:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:52:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:54:05 INFO1 CIMA-run_command_file: Transferring command file '080810.cmd ' to executive ... 2008-Aug-10 00:54:05 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 3 {LOAD ages_config.conf} 2008-Aug-10 00:54:05 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 4 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5} 2008-Aug-10 00:54:05 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 5 {CATALOG AGESFull.cat} 2008-Aug-10 00:54:05 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {IF LSTSLEW(AGES7448_p3_086) < 215126 THEN} 2008-Aug-10 00:54:05 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {FIXEDDRIFT az=277.61 alfaangle=-84.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p3_086 ra=225000.00 dec=155130.00} 2008-Aug-10 00:54:05 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 12 {ENDIF} 2008-Aug-10 00:54:05 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 15 {IF LSTSLEW(AGES7448_p3_090) < 221426 THEN} 2008-Aug-10 00:54:05 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 16 {FIXEDDRIFT az=285.14 alfaangle=88.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p3_090 ra=225000.00 dec=154530.00} 2008-Aug-10 00:54:05 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 19 {ENDIF} 2008-Aug-10 00:54:05 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 22 {IF LSTSLEW(AGES7448_p3_092) < 223726 THEN} 2008-Aug-10 00:54:05 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 23 {FIXEDDRIFT az=309.41 alfaangle=64.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p3_092 ra=225000.00 dec=154230.00} 2008-Aug-10 00:54:05 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 26 {ENDIF} 2008-Aug-10 00:54:05 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 29 {IF LSTSLEW(AGES7448_p3_094) < 230326 THEN} 2008-Aug-10 00:54:05 LOG4 exec_msg: From OBSERVER: store_command_file_line 14 30 {FIXEDDRIFT az=50.03 alfaangle=-25.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p3_094 ra=225000.00 dec=153930.00} 2008-Aug-10 00:54:05 LOG4 exec_msg: From OBSERVER: store_command_file_line 15 33 {ENDIF} 2008-Aug-10 00:54:05 LOG4 exec_msg: From OBSERVER: store_command_file_line 16 36 {IF LSTSLEW(AGES7448_p3_095) < 232626 THEN} 2008-Aug-10 00:54:05 LOG4 exec_msg: From OBSERVER: store_command_file_line 17 37 {FIXEDDRIFT az=74.09 alfaangle=-49.5 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p3_095 ra=225000.00 dec=153800.00} 2008-Aug-10 00:54:05 LOG4 exec_msg: From OBSERVER: store_command_file_line 18 40 {ENDIF} 2008-Aug-10 00:54:06 LOG4 exec_msg: From OBSERVER: store_command_file_line 19 43 {IF LSTSLEW(AGES7448_p3_096) < 234927 THEN} 2008-Aug-10 00:54:06 LOG4 exec_msg: From OBSERVER: store_command_file_line 20 44 {FIXEDDRIFT az=81.40 alfaangle=-55.9 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p3_096 ra=225000.00 dec=153630.00} 2008-Aug-10 00:54:06 LOG4 exec_msg: From OBSERVER: store_command_file_line 21 47 {ENDIF} 2008-Aug-10 00:54:06 LOG4 exec_msg: From OBSERVER: store_command_file_line 22 50 {IF LSTSLEW(AGES33PP_p1_080) < 003829 THEN} 2008-Aug-10 00:54:06 LOG4 exec_msg: From OBSERVER: store_command_file_line 23 51 {FIXEDDRIFT az=217.93 alfaangle=-19.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p1_080 ra=12400.00 dec=304130.00} 2008-Aug-10 00:54:06 LOG4 exec_msg: From OBSERVER: store_command_file_line 24 54 {ENDIF} 2008-Aug-10 00:54:06 LOG4 exec_msg: From OBSERVER: store_command_file_line 25 57 {IF LSTSLEW(AGES33PP_p1_082) < 010129 THEN} 2008-Aug-10 00:54:06 LOG4 exec_msg: From OBSERVER: store_command_file_line 26 58 {FIXEDDRIFT az=201.84 alfaangle=-2.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p1_082 ra=12400.00 dec=303830.00} 2008-Aug-10 00:54:06 LOG4 exec_msg: From OBSERVER: store_command_file_line 27 61 {ENDIF} 2008-Aug-10 00:54:06 LOG4 exec_msg: From OBSERVER: store_command_file_line 28 64 {IF LSTSLEW(AGES33PP_p1_084) < 012429 THEN} 2008-Aug-10 00:54:06 LOG4 exec_msg: From OBSERVER: store_command_file_line 29 65 {FIXEDDRIFT az=180.00 alfaangle=19.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p1_084 ra=12400.00 dec=303530.00} 2008-Aug-10 00:54:06 LOG4 exec_msg: From OBSERVER: store_command_file_line 30 68 {ENDIF} 2008-Aug-10 00:54:06 LOG4 exec_msg: From OBSERVER: store_command_file_line 31 71 {IF LSTSLEW(AGES33PP_p1_086) < 014729 THEN} 2008-Aug-10 00:54:06 LOG4 exec_msg: From OBSERVER: store_command_file_line 32 72 {FIXEDDRIFT az=157.98 alfaangle=40.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p1_086 ra=12400.00 dec=303230.00} 2008-Aug-10 00:54:06 LOG4 exec_msg: From OBSERVER: store_command_file_line 33 75 {ENDIF} 2008-Aug-10 00:54:06 LOG4 exec_msg: From OBSERVER: store_command_file_line 34 78 {IF LSTSLEW(AGES33PP_p1_088) < 021029 THEN} 2008-Aug-10 00:54:06 LOG4 exec_msg: From OBSERVER: store_command_file_line 35 79 {FIXEDDRIFT az=141.58 alfaangle=58.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p1_088 ra=12400.00 dec=302930.00} 2008-Aug-10 00:54:06 LOG4 exec_msg: From OBSERVER: store_command_file_line 36 82 {ENDIF} 2008-Aug-10 00:54:06 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-Aug-10 00:54:06 LOG4 exec_msg: From OBSERVER: run_command_file 080810.cmd 1 1 36 2008-Aug-10 00:54:06 LOG4 run_command_file: Calling 'run_command_file 080810.cmd 1 1 36' 2008-Aug-10 00:54:06 BEGIN begin_task: Starting task 'running command file '080810.cmd'' 2008-Aug-10 00:54:06 LOG5 begin_task: Level: (1) ID = <10205> Status = 0 0 0 0 ok 2008-Aug-10 00:54:06 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '080810.cmd' ...} 2008-Aug-10 00:54:06 NOTE run_command_file: Starting execution of command file '080810.cmd' from line 1 2008-Aug-10 00:54:06 COMMAND run_command_line: EXECUTING command 3: 'LOAD ages_config.conf' 2008-Aug-10 00:54:06 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2008-Aug-10 00:54:06 NOTE CIMA-check_config_file: File 'ages_config.conf' contains an ALFA set-up which will be ignored! 2008-Aug-10 00:54:06 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Aug-10 00:54:06 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2008-Aug-10 00:54:06 NOTE CIMA-load_config_file: Loading configuration file 'ages_config.conf' 2008-Aug-10 00:54:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Aug-10 00:54:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Aug-10 00:54:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Aug-10 00:54:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Aug-10 00:54:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Aug-10 00:54:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2008-Aug-10 00:54:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Aug-10 00:54:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786" 2008-Aug-10 00:54:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786" 2008-Aug-10 00:54:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786" 2008-Aug-10 00:54:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786" 2008-Aug-10 00:54:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786" 2008-Aug-10 00:54:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786" 2008-Aug-10 00:54:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786" 2008-Aug-10 00:54:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786" 2008-Aug-10 00:54:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786" 2008-Aug-10 00:54:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Aug-10 00:54:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Aug-10 00:54:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Aug-10 00:54:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Aug-10 00:54:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Aug-10 00:54:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Aug-10 00:54:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Aug-10 00:54:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Aug-10 00:54:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Aug-10 00:54:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Aug-10 00:54:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Aug-10 00:54:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Aug-10 00:54:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Aug-10 00:54:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2008-Aug-10 00:54:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Aug-10 00:54:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Aug-10 00:54:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Aug-10 00:54:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Aug-10 00:54:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Aug-10 00:54:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Aug-10 00:54:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Aug-10 00:54:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Aug-10 00:54:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Aug-10 00:54:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1670.405752" 2008-Aug-10 00:54:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Aug-10 00:54:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Aug-10 00:54:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Aug-10 00:54:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Aug-10 00:54:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Aug-10 00:54:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Aug-10 00:54:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Aug-10 00:54:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Aug-10 00:54:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Aug-10 00:54:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Aug-10 00:54:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Aug-10 00:54:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Aug-10 00:54:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Aug-10 00:54:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Aug-10 00:54:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Aug-10 00:54:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Aug-10 00:54:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Aug-10 00:54:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Aug-10 00:54:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Aug-10 00:54:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Aug-10 00:54:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Aug-10 00:54:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Aug-10 00:54:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Aug-10 00:54:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Aug-10 00:54:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Aug-10 00:54:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Aug-10 00:54:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Aug-10 00:54:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Aug-10 00:54:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Aug-10 00:54:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Aug-10 00:54:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Aug-10 00:54:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Aug-10 00:54:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Aug-10 00:54:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Aug-10 00:54:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Aug-10 00:54:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Aug-10 00:54:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Aug-10 00:54:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Aug-10 00:54:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Aug-10 00:54:08 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Aug-10 00:54:08 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Aug-10 00:54:08 LOG5 begin_task: Level: (2) ID = <10206> Status = 0 0 0 0 ok 2008-Aug-10 00:54:08 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Aug-10 00:54:08 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Aug-10 00:54:08 LOG1 config_iflo: Receiver ALFA already selected 2008-Aug-10 00:54:08 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-10 00:54:08 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Aug-10 00:54:08 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-10 00:54:08 LOG5 begin_task: Level: (3) ID = <10207> Status = 0 0 0 0 ok 2008-Aug-10 00:54:08 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-10 00:54:08 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-10 00:54:08 LOG5 end_task: Level: (3) ID = <10207> Status = 0 0 0 0 ok 2008-Aug-10 00:54:08 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-10 00:54:08 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Aug-10 00:54:08 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2008-Aug-10 00:54:08 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2008-Aug-10 00:54:08 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Aug-10 00:54:08 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Aug-10 00:54:08 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2008-Aug-10 00:54:08 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2008-Aug-10 00:54:08 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2008-Aug-10 00:54:08 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1670405752.0} 2008-Aug-10 00:54:08 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2008-Aug-10 00:54:08 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2008-Aug-10 00:54:08 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Aug-10 00:54:08 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Aug-10 00:54:08 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Aug-10 00:54:08 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Aug-10 00:54:08 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Aug-10 00:54:08 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2008-Aug-10 00:54:08 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2008-Aug-10 00:54:08 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2008-Aug-10 00:54:08 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2008-Aug-10 00:54:08 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Aug-10 00:54:08 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2008-Aug-10 00:54:08 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2008-Aug-10 00:54:08 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Aug-10 00:54:08 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:54:08 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2008-Aug-10 00:54:08 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2008-Aug-10 00:54:08 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Aug-10 00:54:08 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2008-Aug-10 00:54:08 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2008-Aug-10 00:54:08 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Aug-10 00:54:08 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 00:54:08 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Aug-10 00:54:08 LOG5 begin_task: Level: (3) ID = <10208> Status = 0 0 0 0 ok 2008-Aug-10 00:54:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1670405752.0} 2008-Aug-10 00:54:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Aug-10 00:54:09 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 00:54:09 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 00:54:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:54:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:54:09 LOG4 got_cormsg: From DATATAKING: vw% DONE 2008-Aug-10 00:54:09 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Aug-10 00:54:09 LOG5 end_task: Level: (3) ID = <10208> Status = 0 0 0 0 ok 2008-Aug-10 00:54:09 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Aug-10 00:54:09 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Aug-10 00:54:09 LOG5 finish_task: Level: (2) ID = <10206> Status = 0 0 0 0 ok 2008-Aug-10 00:54:09 DONE finish_task: DONE finished configuration: IF/LO path 2008-Aug-10 00:54:09 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Aug-10 00:54:09 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Aug-10 00:54:09 LOG5 end_task: Level: (2) ID = <10206> Status = 0 0 0 0 ok 2008-Aug-10 00:54:09 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Aug-10 00:54:09 LOG5 begin_task: Level: (2) ID = <10209> Status = 0 0 0 0 ok 2008-Aug-10 00:54:09 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Aug-10 00:54:09 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Aug-10 00:54:09 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2008-Aug-10 00:54:09 START begin_task: Starting task 'selecting calibration port' 2008-Aug-10 00:54:09 LOG5 begin_task: Level: (3) ID = <10210> Status = 0 0 0 0 ok 2008-Aug-10 00:54:09 LOG3 vw_send: To DATATAKING: calport 3 2008-Aug-10 00:54:09 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Aug-10 00:54:09 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 00:54:09 START begin_task: Starting task 'waiting on calport' 2008-Aug-10 00:54:09 LOG5 begin_task: Level: (4) ID = <10211> Status = 0 0 0 0 ok 2008-Aug-10 00:54:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:54:09 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Aug-10 00:54:09 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 00:54:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:54:09 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-10 00:54:09 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Aug-10 00:54:09 LOG5 end_task: Level: (4) ID = <10211> Status = 0 0 0 0 ok 2008-Aug-10 00:54:10 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Aug-10 00:54:10 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Aug-10 00:54:10 LOG5 end_task: Level: (3) ID = <10210> Status = 0 0 0 0 ok 2008-Aug-10 00:54:10 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Aug-10 00:54:10 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Aug-10 00:54:10 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-10 00:54:10 LOG5 begin_task: Level: (3) ID = <10212> Status = 0 0 0 0 ok 2008-Aug-10 00:54:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:54:10 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-10 00:54:10 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-10 00:54:10 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-10 00:54:10 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-10 00:54:10 LOG5 end_task: Level: (3) ID = <10212> Status = 0 0 0 0 ok 2008-Aug-10 00:54:10 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Aug-10 00:54:10 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Aug-10 00:54:10 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Aug-10 00:54:10 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Aug-10 00:54:10 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Aug-10 00:54:10 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Aug-10 00:54:10 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Aug-10 00:54:10 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Aug-10 00:54:10 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 RM 2008-Aug-10 00:54:10 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 RM 2008-Aug-10 00:54:10 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 RM 2008-Aug-10 00:54:10 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 RM 2008-Aug-10 00:54:10 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Aug-10 00:54:10 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Aug-10 00:54:10 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-10 00:54:10 LOG5 begin_task: Level: (3) ID = <10213> Status = 0 0 0 0 ok 2008-Aug-10 00:54:10 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Aug-10 00:54:10 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Aug-10 00:54:10 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-10 00:54:10 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 RM' 2008-Aug-10 00:54:10 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-10 00:54:10 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-10 00:54:10 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-10 00:54:10 LOG5 end_task: Level: (3) ID = <10213> Status = 0 0 0 0 ok 2008-Aug-10 00:54:10 LOG3 sock_errsend: To WAPPDATA: FLUSH 2008-Aug-10 00:54:10 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Aug-10 00:54:10 LOG5 finish_task: Level: (2) ID = <10209> Status = 0 0 0 0 ok 2008-Aug-10 00:54:10 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Aug-10 00:54:10 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Aug-10 00:54:10 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Aug-10 00:54:10 LOG5 end_task: Level: (2) ID = <10209> Status = 0 0 0 0 ok 2008-Aug-10 00:54:10 COMMAND run_command_line: EXECUTING command 4: 'SETUP FIXEDDRIFT calwhen=tracking calsecs=5' 2008-Aug-10 00:54:10 COMMAND run_command_line: EXECUTING command 5: 'CATALOG AGESFull.cat' 2008-Aug-10 00:54:10 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2008-Aug-10 00:54:10 COMMAND run_command_line: EXECUTING command 8: 'IF LSTSLEW(AGES7448_p3_086) < 215126 THEN' 2008-Aug-10 00:54:11 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES7448_p3_086) < 215126 2008-Aug-10 00:54:11 INFO5 is_if_valid: Condition parsed as: 21.738473666666664 < 21.857222222222223 2008-Aug-10 00:54:11 COMMAND run_command_line: EXECUTING command 9: 'FIXEDDRIFT az=277.61 alfaangle=-84.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p3_086 ra=225000.00 dec=155130.00' 2008-Aug-10 00:54:11 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Aug-10 00:54:11 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Aug-10 00:54:11 WARNING check_obsmode: WARNING failed to get a response from the CIMA frontend when checking options for 'fixed azimuth drift map'! 2008-Aug-10 00:54:11 NOTE check_obsmode: Assuming that the options are OK 2008-Aug-10 00:54:11 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 277.61 -84.8 hcorcal 5 tracking no first 1 AGES7448_p3_086 225000.00 155130.00 J 8500.0 Heliocentric velocity(optical)' 2008-Aug-10 00:54:11 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Aug-10 00:54:11 LOG5 begin_task: Level: (2) ID = <10214> Status = 0 0 0 0 ok 2008-Aug-10 00:54:11 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'galfasrc' 2008-Aug-10 00:54:11 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Aug-10 00:54:11 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES7448_p3_086} 2008-Aug-10 00:54:12 INFO3 fixed_driftmap: Sending telescope to Az = 277.61 and ZA = 14.31 2008-Aug-10 00:54:12 LOG3 track_source: Calling 'track_source AGES7448_p3_086 277.61 14.3070950943 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Aug-10 00:54:12 START begin_task: Starting task 'sending tracking commands' 2008-Aug-10 00:54:12 LOG5 begin_task: Level: (3) ID = <10215> Status = 0 0 0 0 ok 2008-Aug-10 00:54:12 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7448_p3_086} INFO {Slewing to source 'AGES7448_p3_086' ...} 2008-Aug-10 00:54:12 INFO1 track_source: Starting to track AGES7448_p3_086 2008-Aug-10 00:54:12 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7448_p3_086" 2008-Aug-10 00:54:12 LOG3 vw_send: To DATATAKING: set ra 277.61 2008-Aug-10 00:54:12 LOG3 vw_send: To DATATAKING: set dec 14.3070950943 2008-Aug-10 00:54:12 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Aug-10 00:54:12 LOG3 vw_send: To DATATAKING: pnt tr 277.61 14.3070950943 -CF 2008-Aug-10 00:54:12 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Aug-10 00:54:12 STOP finish_task: Finishing task 'sending tracking commands' 2008-Aug-10 00:54:12 LOG5 finish_task: Level: (3) ID = <10215> Status = 0 0 0 0 ok 2008-Aug-10 00:54:12 INFO2 finish_task: DONE finished sending: tracking commands 2008-Aug-10 00:54:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 00:54:12 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Aug-10 00:54:12 LOG5 end_task: Level: (3) ID = <10215> Status = 0 0 0 0 ok 2008-Aug-10 00:54:12 START begin_task: Starting task 'rotate ALFA to -84.8 degrees' 2008-Aug-10 00:54:12 LOG5 begin_task: Level: (3) ID = <10216> Status = 0 0 0 0 ok 2008-Aug-10 00:54:12 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -84.8 degrees ...} 2008-Aug-10 00:54:12 INFO2 rotate_alfa: ALFA commanded to -84.8 degrees 2008-Aug-10 00:54:12 LOG3 sock_errsend: To ALFAMOTOR: POSITION -84.8 REPLY 2008-Aug-10 00:54:12 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Aug-10 00:54:12 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Aug-10 00:54:12 LOG5 begin_task: Level: (4) ID = <10217> Status = 0 0 0 0 ok 2008-Aug-10 00:54:12 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Aug-10 00:54:12 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7448_p3_086" 2008-Aug-10 00:54:12 LOG4 got_cormsg: From DATATAKING: set ra 277.61 2008-Aug-10 00:54:12 LOG4 got_cormsg: From DATATAKING: set dec 14.3070950943 2008-Aug-10 00:54:12 LOG4 got_cormsg: From DATATAKING: vw% 277.61 2008-Aug-10 00:54:12 LOG4 got_cormsg: From DATATAKING: vw% 14.3070950943 2008-Aug-10 00:54:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:54:12 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Aug-10 00:54:12 LOG4 got_cormsg: From DATATAKING: pnt tr 277.61 14.3070950943 -CF 2008-Aug-10 00:54:12 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Aug-10 00:54:12 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Aug-10 00:54:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:55:10 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Aug-10 00:55:10 INFO3 alfa_motor: ALFA rotator in-position -84.80 degrees 2008-Aug-10 00:55:10 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Aug-10 00:55:10 LOG5 end_task: Level: (4) ID = <10217> Status = 0 0 0 0 ok 2008-Aug-10 00:55:10 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Aug-10 00:55:10 STOP finish_task: Finishing task 'rotate ALFA to -84.8 degrees' 2008-Aug-10 00:55:10 LOG5 finish_task: Level: (3) ID = <10216> Status = 0 0 0 0 ok 2008-Aug-10 00:55:10 INFO2 finish_task: DONE finished configuration: rotating ALFA to -84.8 degrees 2008-Aug-10 00:55:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 00:55:10 STOP end_task: Finishing task 'rotate ALFA to -84.8 degrees' with status 'OK' 2008-Aug-10 00:55:10 LOG5 end_task: Level: (3) ID = <10216> Status = 0 0 0 0 ok 2008-Aug-10 00:55:10 START begin_task: Starting task 'waiting on telescope' 2008-Aug-10 00:55:10 LOG5 begin_task: Level: (3) ID = <10218> Status = 0 0 0 0 ok 2008-Aug-10 00:55:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Aug-10 00:55:10 LOG3 waittrk: Start waittrk 5 2008-Aug-10 00:55:10 START begin_task: Starting task 'waiting on telescope movement' 2008-Aug-10 00:55:10 LOG5 begin_task: Level: (4) ID = <10219> Status = 0 0 0 0 ok 2008-Aug-10 00:55:15 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Aug-10 00:55:15 LOG5 end_task: Level: (4) ID = <10219> Status = 0 0 0 0 ok 2008-Aug-10 00:55:15 START begin_task: Starting task 'waiting on telescope on source' 2008-Aug-10 00:55:15 LOG5 begin_task: Level: (4) ID = <10220> Status = 0 0 0 0 ok 2008-Aug-10 00:55:15 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Aug-10 00:55:15 LOG5 end_task: Level: (4) ID = <10220> Status = 0 0 0 0 ok 2008-Aug-10 00:55:15 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Aug-10 00:55:15 INFO2 waittrk: Now tracking AGES7448_p3_086 2008-Aug-10 00:55:15 LOG4 waittrk: Current telescope position: Az = 277.19 ZA = 14.31 2008-Aug-10 00:55:15 STOP finish_task: Finishing task 'waiting on telescope' 2008-Aug-10 00:55:15 LOG5 finish_task: Level: (3) ID = <10218> Status = 0 0 0 0 ok 2008-Aug-10 00:55:15 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Aug-10 00:55:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 00:55:15 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Aug-10 00:55:15 LOG5 end_task: Level: (3) ID = <10218> Status = 0 0 0 0 ok 2008-Aug-10 00:55:15 START begin_task: Starting task 'selecting calibration type' 2008-Aug-10 00:55:15 LOG5 begin_task: Level: (3) ID = <10221> Status = 0 0 0 0 ok 2008-Aug-10 00:55:15 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Aug-10 00:55:16 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Aug-10 00:55:16 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 00:55:16 START begin_task: Starting task 'waiting on setcal' 2008-Aug-10 00:55:16 LOG5 begin_task: Level: (4) ID = <10222> Status = 0 0 0 0 ok 2008-Aug-10 00:55:16 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Aug-10 00:55:16 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 00:55:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:55:16 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-10 00:55:16 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Aug-10 00:55:16 LOG5 end_task: Level: (4) ID = <10222> Status = 0 0 0 0 ok 2008-Aug-10 00:55:16 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Aug-10 00:55:16 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-10 00:55:16 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Aug-10 00:55:16 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-10 00:55:16 LOG5 begin_task: Level: (4) ID = <10223> Status = 0 0 0 0 ok 2008-Aug-10 00:55:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 00:55:16 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-10 00:55:16 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-10 00:55:16 LOG5 end_task: Level: (4) ID = <10223> Status = 0 0 0 0 ok 2008-Aug-10 00:55:16 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-10 00:55:16 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Aug-10 00:55:16 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-10 00:55:16 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Aug-10 00:55:16 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-10 00:55:16 LOG5 begin_task: Level: (4) ID = <10224> Status = 0 0 0 0 ok 2008-Aug-10 00:55:16 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-10 00:55:16 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-10 00:55:16 LOG5 end_task: Level: (4) ID = <10224> Status = 0 0 0 0 ok 2008-Aug-10 00:55:16 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-10 00:55:16 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Aug-10 00:55:16 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Aug-10 00:55:16 LOG5 end_task: Level: (3) ID = <10221> Status = 0 0 0 0 ok 2008-Aug-10 00:55:16 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2008-Aug-10 00:55:16 INFO2 astwait: Waiting for 359 seconds from 04:55:16 to 05:01:15 UTC ... 2008-Aug-10 00:55:16 LOG4 send_obs_status: To obs_status: <1> TASKTIME 359 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Aug-10 00:55:16 START begin_task: Starting task 'waiting on waiting for AST time' 2008-Aug-10 00:55:16 LOG5 begin_task: Level: (3) ID = <10225> Status = 0 0 0 0 ok 2008-Aug-10 01:01:15 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2008-Aug-10 01:01:15 LOG5 end_task: Level: (3) ID = <10225> Status = 0 0 0 0 ok 2008-Aug-10 01:01:15 INFO3 astwait: Finished waiting 2008-Aug-10 01:01:15 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Aug-10 01:01:15 LOG5 dopset_later: Calling 'dopset_later 61.161388493187019' 2008-Aug-10 01:01:15 INFO3 dopset_later: Setting Doppler correction for 01:02:15 (61.2 seconds from now) 2008-Aug-10 01:01:15 LOG5 antvel: Calling 'antvel 277.610000 14.307095 F 61.161388493187019' 2008-Aug-10 01:01:15 LOG2 antvel: Transforming current Az = 277.61 ZA = 14.31 to apparent RA = 22:50:27.1 Dec = +15:54:20.9 2008-Aug-10 01:01:15 LOG2 antvel: Parameters to Doppler: Heliocentric 18135 2008 223 0.0 2008-Aug-10 01:01:15 INFO5 antvel: Computed antenna velocity: -14.55927 km/s 2008-Aug-10 01:01:15 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-14.5592701767 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Aug-10 01:01:15 INFO4 dopset_gen: New sky frequencies: 1381.310511 1381.310511 1381.310511 1381.310511 1381.310511 1381.310511 1381.310511 1381.310511 1381.310511 2008-Aug-10 01:01:15 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.310511 sky0=1381.310511 sky1=1381.310511 sky2=1381.310511 sky3=1381.310511 sky4=1381.310511 sky5=1381.310511 sky6=1381.310511 sky7=1381.310511 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-10 01:01:15 LOG2 dopset_gen: Result from 'sky2syn': 1631.310511 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-10 01:01:15 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631310511.0} 2008-Aug-10 01:01:15 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 01:01:15 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Aug-10 01:01:15 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Aug-10 01:01:15 INFO5 fixed_driftmap: Tracking J2000 position: RA = 22:49:03.5 Dec = +15:51:36.5 2008-Aug-10 01:01:15 LOG3 track_source: Calling 'track_source AGES7448_p3_086 224903.5 155136.5 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Aug-10 01:01:15 START begin_task: Starting task 'sending tracking commands' 2008-Aug-10 01:01:15 LOG5 begin_task: Level: (3) ID = <10226> Status = 0 0 0 0 ok 2008-Aug-10 01:01:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7448_p3_086} INFO {Slewing to source 'AGES7448_p3_086' ...} 2008-Aug-10 01:01:15 INFO1 track_source: Starting to track AGES7448_p3_086 2008-Aug-10 01:01:15 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7448_p3_086" 2008-Aug-10 01:01:15 LOG3 vw_send: To DATATAKING: set ra 224903.5 2008-Aug-10 01:01:15 LOG3 vw_send: To DATATAKING: set dec 155136.5 2008-Aug-10 01:01:15 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Aug-10 01:01:15 LOG3 vw_send: To DATATAKING: pnt tr 224903.5 155136.5 -CJ 2008-Aug-10 01:01:15 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Aug-10 01:01:15 STOP finish_task: Finishing task 'sending tracking commands' 2008-Aug-10 01:01:15 LOG5 finish_task: Level: (3) ID = <10226> Status = 0 0 0 0 ok 2008-Aug-10 01:01:15 INFO2 finish_task: DONE finished sending: tracking commands 2008-Aug-10 01:01:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 01:01:15 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Aug-10 01:01:15 LOG5 end_task: Level: (3) ID = <10226> Status = 0 0 0 0 ok 2008-Aug-10 01:01:15 START begin_task: Starting task 'waiting on telescope' 2008-Aug-10 01:01:15 LOG5 begin_task: Level: (3) ID = <10227> Status = 0 0 0 0 ok 2008-Aug-10 01:01:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Aug-10 01:01:15 LOG3 waittrk: Start waittrk 5 2008-Aug-10 01:01:15 START begin_task: Starting task 'waiting on telescope movement' 2008-Aug-10 01:01:15 LOG5 begin_task: Level: (4) ID = <10228> Status = 0 0 0 0 ok 2008-Aug-10 01:01:15 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631310511.0} 2008-Aug-10 01:01:15 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 01:01:15 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7448_p3_086" 2008-Aug-10 01:01:15 LOG4 got_cormsg: From DATATAKING: set ra 224903.5 2008-Aug-10 01:01:15 LOG4 got_cormsg: From DATATAKING: set dec 155136.5 2008-Aug-10 01:01:15 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Aug-10 01:01:15 LOG4 got_cormsg: From DATATAKING: vw% 224903.5 2008-Aug-10 01:01:15 LOG4 got_cormsg: From DATATAKING: vw% 155136.5 2008-Aug-10 01:01:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 01:01:15 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Aug-10 01:01:15 LOG4 got_cormsg: From DATATAKING: pnt tr 224903.5 155136.5 -CJ 2008-Aug-10 01:01:15 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Aug-10 01:01:15 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Aug-10 01:01:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 01:01:20 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Aug-10 01:01:20 LOG5 end_task: Level: (4) ID = <10228> Status = 0 0 0 0 ok 2008-Aug-10 01:01:20 START begin_task: Starting task 'waiting on telescope on source' 2008-Aug-10 01:01:20 LOG5 begin_task: Level: (4) ID = <10229> Status = 0 0 0 0 ok 2008-Aug-10 01:01:22 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Aug-10 01:01:22 LOG5 end_task: Level: (4) ID = <10229> Status = 0 0 0 0 ok 2008-Aug-10 01:01:22 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Aug-10 01:01:22 INFO2 waittrk: Now tracking AGES7448_p3_086 2008-Aug-10 01:01:22 LOG4 waittrk: Current telescope position: Az = 277.20 ZA = 14.29 2008-Aug-10 01:01:22 STOP finish_task: Finishing task 'waiting on telescope' 2008-Aug-10 01:01:22 LOG5 finish_task: Level: (3) ID = <10227> Status = 0 0 0 0 ok 2008-Aug-10 01:01:22 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Aug-10 01:01:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 01:01:22 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Aug-10 01:01:22 LOG5 end_task: Level: (3) ID = <10227> Status = 0 0 0 0 ok 2008-Aug-10 01:01:22 START begin_task: Starting task 'adjusting WAPP power' 2008-Aug-10 01:01:22 LOG5 begin_task: Level: (3) ID = <10230> Status = 0 0 0 0 ok 2008-Aug-10 01:01:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Aug-10 01:01:22 INFO2 adjust_power: Starting to adjust WAPP power 2008-Aug-10 01:01:22 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Aug-10 01:01:22 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Aug-10 01:01:22 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 01:01:22 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Aug-10 01:01:22 LOG5 begin_task: Level: (4) ID = <10231> Status = 0 0 0 0 ok 2008-Aug-10 01:01:22 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Aug-10 01:01:22 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 01:01:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 01:01:25 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-10 01:01:25 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Aug-10 01:01:25 LOG5 end_task: Level: (4) ID = <10231> Status = 0 0 0 0 ok 2008-Aug-10 01:01:25 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Aug-10 01:01:25 START begin_task: Starting task 'adjusting WAPP power' 2008-Aug-10 01:01:25 LOG5 begin_task: Level: (4) ID = <10232> Status = 0 0 0 0 ok 2008-Aug-10 01:01:25 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Aug-10 01:01:25 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Aug-10 01:01:25 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Aug-10 01:01:25 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Aug-10 01:01:25 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Aug-10 01:01:25 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Aug-10 01:01:25 LOG5 begin_task: Level: (5) ID = <10233> Status = 0 0 0 0 ok 2008-Aug-10 01:01:25 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Aug-10 01:01:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 01:01:26 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 6 dB 2008-Aug-10 01:01:26 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 2 dB --- beam 5: 6 5 dB 2008-Aug-10 01:01:26 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 3 dB --- beam 3: 3 3 dB 2008-Aug-10 01:01:26 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 2 2 dB 2008-Aug-10 01:01:26 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Aug-10 01:01:26 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Aug-10 01:01:26 LOG5 end_task: Level: (5) ID = <10233> Status = 0 0 0 0 ok 2008-Aug-10 01:01:26 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.010 1.026 ALFA beam 1: 1.011 0.928 2008-Aug-10 01:01:26 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.900 1.072 ALFA beam 3: 1.069 0.914 2008-Aug-10 01:01:26 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.081 1.101 ALFA beam 5: 0.878 1.010 2008-Aug-10 01:01:26 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.903 0.978 ALFA beam 7: 0.993 1.083 2008-Aug-10 01:01:26 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Aug-10 01:01:26 LOG5 finish_task: Level: (4) ID = <10232> Status = 0 0 0 0 ok 2008-Aug-10 01:01:26 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Aug-10 01:01:26 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 01:01:26 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Aug-10 01:01:26 LOG5 end_task: Level: (4) ID = <10232> Status = 0 0 0 0 ok 2008-Aug-10 01:01:26 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Aug-10 01:01:26 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Aug-10 01:01:26 LOG5 finish_task: Level: (3) ID = <10230> Status = 0 0 0 0 ok 2008-Aug-10 01:01:26 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Aug-10 01:01:26 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 01:01:26 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Aug-10 01:01:26 LOG5 end_task: Level: (3) ID = <10230> Status = 0 0 0 0 ok 2008-Aug-10 01:01:26 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 RM 2008-Aug-10 01:01:26 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 RM 2008-Aug-10 01:01:26 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 RM 2008-Aug-10 01:01:26 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 RM 2008-Aug-10 01:01:26 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Aug-10 01:01:26 START begin_task: Starting task 'WAPP calibration' 2008-Aug-10 01:01:26 LOG5 begin_task: Level: (3) ID = <10234> Status = 0 0 0 0 ok 2008-Aug-10 01:01:26 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Aug-10 01:01:26 START begin_task: Starting task 'selecting calibration type' 2008-Aug-10 01:01:26 LOG5 begin_task: Level: (4) ID = <10235> Status = 0 0 0 0 ok 2008-Aug-10 01:01:26 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Aug-10 01:01:26 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Aug-10 01:01:26 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 01:01:26 START begin_task: Starting task 'waiting on setcal' 2008-Aug-10 01:01:26 LOG5 begin_task: Level: (5) ID = <10236> Status = 0 0 0 0 ok 2008-Aug-10 01:01:26 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 RM' 2008-Aug-10 01:01:26 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Aug-10 01:01:26 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 01:01:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 01:01:27 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-10 01:01:27 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Aug-10 01:01:27 LOG5 end_task: Level: (5) ID = <10236> Status = 0 0 0 0 ok 2008-Aug-10 01:01:27 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Aug-10 01:01:27 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-10 01:01:27 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Aug-10 01:01:27 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-10 01:01:27 LOG5 begin_task: Level: (5) ID = <10237> Status = 0 0 0 0 ok 2008-Aug-10 01:01:27 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 01:01:27 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-10 01:01:27 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-10 01:01:27 LOG5 end_task: Level: (5) ID = <10237> Status = 0 0 0 0 ok 2008-Aug-10 01:01:27 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-10 01:01:27 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Aug-10 01:01:27 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-10 01:01:27 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Aug-10 01:01:27 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-10 01:01:27 LOG5 begin_task: Level: (5) ID = <10238> Status = 0 0 0 0 ok 2008-Aug-10 01:01:27 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-10 01:01:27 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-10 01:01:27 LOG5 end_task: Level: (5) ID = <10238> Status = 0 0 0 0 ok 2008-Aug-10 01:01:27 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-10 01:01:27 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Aug-10 01:01:27 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Aug-10 01:01:27 LOG5 end_task: Level: (4) ID = <10235> Status = 0 0 0 0 ok 2008-Aug-10 01:01:27 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Aug-10 01:01:27 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Aug-10 01:01:27 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Aug-10 01:01:27 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-10 01:01:27 LOG5 begin_task: Level: (4) ID = <10239> Status = 0 0 0 0 ok 2008-Aug-10 01:01:27 NOTE WAPPDATA-new_file: New FITS file: wapp.20080810.a2048.0003.fits 2008-Aug-10 01:01:27 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080810.a2048.0003.fits} 2008-Aug-10 01:01:27 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-10 01:01:27 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Aug-10 01:01:27 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-10 01:01:27 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-10 01:01:27 LOG5 end_task: Level: (4) ID = <10239> Status = 0 0 0 0 ok 2008-Aug-10 01:01:27 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Aug-10 01:01:27 LOG4 take_data: Calling 'take_data 5 5 CAL ON -' 2008-Aug-10 01:01:27 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-10 01:01:27 LOG5 begin_task: Level: (4) ID = <10240> Status = 0 0 0 0 ok 2008-Aug-10 01:01:27 LOG5 log_alfabeam: Parameters: 22.81763888888889 15.860138888888889 21.843807 2008.6106575595102 -84.800079 2008-Aug-10 01:01:27 LOG4 log_alfabeam: ALFABEAM 0 22.817638888888890 15.860138888888880 2008-Aug-10 01:01:27 LOG4 log_alfabeam: ALFABEAM 1 22.819454114892125 15.769465495048806 2008-Aug-10 01:01:27 LOG4 log_alfabeam: ALFABEAM 2 22.824718178997500 15.829837292713359 2008-Aug-10 01:01:27 LOG4 log_alfabeam: ALFABEAM 3 22.822877587042687 15.920727773089601 2008-Aug-10 01:01:27 LOG4 log_alfabeam: ALFABEAM 4 22.815782631724176 15.950408736914936 2008-Aug-10 01:01:27 LOG4 log_alfabeam: ALFABEAM 5 22.810555414608526 15.890271546406177 2008-Aug-10 01:01:27 LOG4 log_alfabeam: ALFABEAM 6 22.812386465515338 15.800217896787045 2008-Aug-10 01:01:27 INFO2 take_data: Starting WAPP scan: 822300053 2008-Aug-10 01:01:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Aug-10 01:01:27 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-10 01:01:27 LOG5 begin_task: Level: (5) ID = <10241> Status = 0 0 0 0 ok 2008-Aug-10 01:01:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-10 01:01:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18088.00 2008-Aug-10 01:01:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.310511 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-10 01:01:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.310511 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 01:01:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.310511 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 01:01:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.310511 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 01:01:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.310511 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 01:01:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.310511 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 01:01:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.310511 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 01:01:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.310511 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 01:01:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.310511 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 01:01:33 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (499999966 != 500002014)! 2008-Aug-10 01:01:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-10 01:01:33 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-10 01:01:33 LOG5 end_task: Level: (5) ID = <10241> Status = 0 0 0 0 ok 2008-Aug-10 01:01:33 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-10 01:01:33 LOG5 end_task: Level: (4) ID = <10240> Status = 0 0 0 0 ok 2008-Aug-10 01:01:33 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Aug-10 01:01:33 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Aug-10 01:01:33 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Aug-10 01:01:33 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-10 01:01:33 LOG5 begin_task: Level: (4) ID = <10242> Status = 0 0 0 0 ok 2008-Aug-10 01:01:34 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-10 01:01:34 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-10 01:01:34 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-10 01:01:34 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-10 01:01:34 LOG5 end_task: Level: (4) ID = <10242> Status = 0 0 0 0 ok 2008-Aug-10 01:01:34 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Aug-10 01:01:34 LOG4 take_data: Calling 'take_data 5 5 CAL OFF -' 2008-Aug-10 01:01:34 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-10 01:01:34 LOG5 begin_task: Level: (4) ID = <10243> Status = 0 0 0 0 ok 2008-Aug-10 01:01:34 LOG5 log_alfabeam: Parameters: 22.81763888888889 15.860138888888889 21.845478 2008.6106577496387 -84.800079 2008-Aug-10 01:01:34 LOG4 log_alfabeam: ALFABEAM 0 22.817638888888887 15.860138888888898 2008-Aug-10 01:01:34 LOG4 log_alfabeam: ALFABEAM 1 22.819452670081144 15.769459272350526 2008-Aug-10 01:01:34 LOG4 log_alfabeam: ALFABEAM 2 22.824717705082939 15.829814252889431 2008-Aug-10 01:01:34 LOG4 log_alfabeam: ALFABEAM 3 22.822878515252032 15.920711396624029 2008-Aug-10 01:01:34 LOG4 log_alfabeam: ALFABEAM 4 22.815784003490577 15.950414402421929 2008-Aug-10 01:01:34 LOG4 log_alfabeam: ALFABEAM 5 22.810555881667515 15.890294397607775 2008-Aug-10 01:01:34 LOG4 log_alfabeam: ALFABEAM 6 22.812385518743710 15.800235519379132 2008-Aug-10 01:01:34 INFO2 take_data: Starting WAPP scan: 822300054 2008-Aug-10 01:01:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Aug-10 01:01:34 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-10 01:01:34 LOG5 begin_task: Level: (5) ID = <10244> Status = 0 0 0 0 ok 2008-Aug-10 01:01:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-10 01:01:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18095.00 2008-Aug-10 01:01:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.310511 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-10 01:01:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.310511 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 01:01:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.310511 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 01:01:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.310511 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 01:01:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.310511 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 01:01:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.310511 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 01:01:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.310511 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 01:01:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.310511 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 01:01:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.310511 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 01:01:40 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (499999966 != 500002014)! 2008-Aug-10 01:01:40 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Aug-10 01:01:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-10 01:01:40 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-10 01:01:40 LOG5 end_task: Level: (5) ID = <10244> Status = 0 0 0 0 ok 2008-Aug-10 01:01:40 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-10 01:01:40 LOG5 end_task: Level: (4) ID = <10243> Status = 0 0 0 0 ok 2008-Aug-10 01:01:40 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Aug-10 01:01:40 STOP finish_task: Finishing task 'WAPP calibration' 2008-Aug-10 01:01:40 LOG5 finish_task: Level: (3) ID = <10234> Status = 0 0 0 0 ok 2008-Aug-10 01:01:40 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Aug-10 01:01:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 01:01:40 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Aug-10 01:01:40 LOG5 end_task: Level: (3) ID = <10234> Status = 0 0 0 0 ok 2008-Aug-10 01:01:41 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Aug-10 01:01:41 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 277.61 and ZA = 14.31 2008-Aug-10 01:01:41 LOG3 track_source: Calling 'track_source AGES7448_p3_086 277.61 14.3070950943 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Aug-10 01:01:41 START begin_task: Starting task 'sending tracking commands' 2008-Aug-10 01:01:41 LOG5 begin_task: Level: (3) ID = <10245> Status = 0 0 0 0 ok 2008-Aug-10 01:01:41 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7448_p3_086} INFO {Slewing to source 'AGES7448_p3_086' ...} 2008-Aug-10 01:01:41 INFO1 track_source: Starting to track AGES7448_p3_086 2008-Aug-10 01:01:41 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7448_p3_086" 2008-Aug-10 01:01:41 LOG3 vw_send: To DATATAKING: set ra 277.61 2008-Aug-10 01:01:41 LOG3 vw_send: To DATATAKING: set dec 14.3070950943 2008-Aug-10 01:01:41 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Aug-10 01:01:41 LOG3 vw_send: To DATATAKING: pnt tr 277.61 14.3070950943 -CF 2008-Aug-10 01:01:41 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Aug-10 01:01:41 STOP finish_task: Finishing task 'sending tracking commands' 2008-Aug-10 01:01:41 LOG5 finish_task: Level: (3) ID = <10245> Status = 0 0 0 0 ok 2008-Aug-10 01:01:41 INFO2 finish_task: DONE finished sending: tracking commands 2008-Aug-10 01:01:41 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 01:01:41 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Aug-10 01:01:41 LOG5 end_task: Level: (3) ID = <10245> Status = 0 0 0 0 ok 2008-Aug-10 01:01:41 LOG1 fixed_driftmap: Parameters: HA = -00:59:01.3 Start = 21:51:26.0 LST = 21:50:50.7 diff = 35.3 secs 2008-Aug-10 01:01:41 INFO2 fixed_driftmap: Waiting 33.3 seconds for RA 22:50:27 2008-Aug-10 01:01:41 INFO2 lstwait: Waiting for 33.2 secs from LST 21:50:51 to LST 21:51:24 ... 2008-Aug-10 01:01:41 LOG4 send_obs_status: To obs_status: <1> TASKTIME 33.166834097667603 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Aug-10 01:01:41 START begin_task: Starting task 'waiting on wait on LST' 2008-Aug-10 01:01:41 LOG5 begin_task: Level: (3) ID = <10246> Status = 0 0 0 0 ok 2008-Aug-10 01:01:41 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7448_p3_086" 2008-Aug-10 01:01:41 LOG4 got_cormsg: From DATATAKING: set ra 277.61 2008-Aug-10 01:01:41 LOG4 got_cormsg: From DATATAKING: set dec 14.3070950943 2008-Aug-10 01:01:41 LOG4 got_cormsg: From DATATAKING: vw% 277.61 2008-Aug-10 01:01:41 LOG4 got_cormsg: From DATATAKING: vw% 14.3070950943 2008-Aug-10 01:01:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 01:01:41 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Aug-10 01:01:41 LOG4 got_cormsg: From DATATAKING: pnt tr 277.61 14.3070950943 -CF 2008-Aug-10 01:01:41 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Aug-10 01:01:41 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Aug-10 01:01:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 01:02:14 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Aug-10 01:02:14 LOG5 end_task: Level: (3) ID = <10246> Status = 0 0 0 0 ok 2008-Aug-10 01:02:14 LOG4 lstwait: Finished waiting 0.83 seconds late 2008-Aug-10 01:02:14 INFO3 lstwait: Finished waiting 2008-Aug-10 01:02:14 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Aug-10 01:02:14 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Aug-10 01:02:14 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Aug-10 01:02:14 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Aug-10 01:02:14 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Aug-10 01:02:14 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ -' 2008-Aug-10 01:02:14 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-10 01:02:14 LOG5 begin_task: Level: (3) ID = <10247> Status = 0 0 0 0 ok 2008-Aug-10 01:02:14 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-10 01:02:14 INFO2 take_data: Starting WAPP scan: 822300055 2008-Aug-10 01:02:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Aug-10 01:02:15 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-10 01:02:15 LOG5 begin_task: Level: (4) ID = <10248> Status = 0 0 0 0 ok 2008-Aug-10 01:02:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-10 01:02:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18136.00 2008-Aug-10 01:02:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.310511 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-10 01:02:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.310511 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 01:02:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.310511 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 01:02:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.310511 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 01:02:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.310511 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 01:02:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.310511 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 01:02:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.310511 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 01:02:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.310511 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 01:02:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.310511 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 01:02:17 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:02:18 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:02:19 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:02:20 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:02:21 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:02:22 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:02:23 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:02:24 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:02:25 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:02:26 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:02:27 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:02:28 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:02:29 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:02:30 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:02:31 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:02:32 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:02:33 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:02:34 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:02:35 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:02:36 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:02:37 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:02:38 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:02:39 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:02:40 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:02:41 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:02:42 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:02:43 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:02:44 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:02:45 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:02:46 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:02:47 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:02:48 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:02:49 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:02:50 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:02:51 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:02:52 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:02:53 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:02:54 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:02:55 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:02:56 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:02:57 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:02:58 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:02:59 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:03:00 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:03:01 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:03:02 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:03:03 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:03:04 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:03:05 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:03:06 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:03:07 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:03:08 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:03:09 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:03:10 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:03:11 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:03:12 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:03:13 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:03:14 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:03:15 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:03:16 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:03:17 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:03:18 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:03:19 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:03:20 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:03:21 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:03:22 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:03:23 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:03:24 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:03:25 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:17:19 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:17:20 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:17:21 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:17:22 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:17:23 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:17:24 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:17:25 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:17:26 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:17:27 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:17:28 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:17:29 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:17:30 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:17:31 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:17:32 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:17:33 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:17:34 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:17:35 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:17:36 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:17:37 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:17:38 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:17:39 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:17:40 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:17:41 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:17:42 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:17:43 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:17:44 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:17:45 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:17:46 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:17:47 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:17:48 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:17:49 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:17:50 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:17:51 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:17:52 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:17:53 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:17:54 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:17:55 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:17:56 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:17:57 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:17:58 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:17:59 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:18:00 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:18:01 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:18:02 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:18:03 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:18:04 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:18:05 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:18:06 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:18:07 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:18:08 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:18:09 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 01:22:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-10 01:22:16 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-10 01:22:16 LOG5 end_task: Level: (4) ID = <10248> Status = 0 0 0 0 ok 2008-Aug-10 01:22:16 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-10 01:22:16 LOG5 end_task: Level: (3) ID = <10247> Status = 0 0 0 0 ok 2008-Aug-10 01:22:16 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Aug-10 01:22:16 LOG5 finish_task: Level: (2) ID = <10214> Status = 0 0 0 0 ok 2008-Aug-10 01:22:16 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Aug-10 01:22:16 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Aug-10 01:22:16 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Aug-10 01:22:16 LOG5 end_task: Level: (2) ID = <10214> Status = 0 0 0 0 ok 2008-Aug-10 01:22:16 COMMAND run_command_line: EXECUTING command 12: 'ENDIF' 2008-Aug-10 01:22:16 COMMAND run_command_line: EXECUTING command 15: 'IF LSTSLEW(AGES7448_p3_090) < 221426 THEN' 2008-Aug-10 01:22:17 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES7448_p3_090) < 221426 2008-Aug-10 01:22:17 INFO5 is_if_valid: Condition parsed as: 22.223368666666666 < 22.240555555555556 2008-Aug-10 01:22:17 COMMAND run_command_line: EXECUTING command 16: 'FIXEDDRIFT az=285.14 alfaangle=88.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p3_090 ra=225000.00 dec=154530.00' 2008-Aug-10 01:22:17 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Aug-10 01:22:17 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Aug-10 01:22:17 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 285.14 88.6 hcorcal 5 tracking no first 1 AGES7448_p3_090 225000.00 154530.00 J 8500.0 Heliocentric velocity(optical)' 2008-Aug-10 01:22:17 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Aug-10 01:22:17 LOG5 begin_task: Level: (2) ID = <10249> Status = 0 0 0 0 ok 2008-Aug-10 01:22:17 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES7448_p3_086' 2008-Aug-10 01:22:17 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Aug-10 01:22:17 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES7448_p3_090} 2008-Aug-10 01:22:17 INFO3 fixed_driftmap: Sending telescope to Az = 285.14 and ZA = 8.97 2008-Aug-10 01:22:17 LOG3 track_source: Calling 'track_source AGES7448_p3_090 285.14 8.9708312044 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Aug-10 01:22:17 START begin_task: Starting task 'sending tracking commands' 2008-Aug-10 01:22:17 LOG5 begin_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2008-Aug-10 01:22:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7448_p3_090} INFO {Slewing to source 'AGES7448_p3_090' ...} 2008-Aug-10 01:22:17 INFO1 track_source: Starting to track AGES7448_p3_090 2008-Aug-10 01:22:18 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7448_p3_090" 2008-Aug-10 01:22:18 LOG3 vw_send: To DATATAKING: set ra 285.14 2008-Aug-10 01:22:18 LOG3 vw_send: To DATATAKING: set dec 8.9708312044 2008-Aug-10 01:22:18 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Aug-10 01:22:18 LOG3 vw_send: To DATATAKING: pnt tr 285.14 8.9708312044 -CF 2008-Aug-10 01:22:18 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Aug-10 01:22:18 STOP finish_task: Finishing task 'sending tracking commands' 2008-Aug-10 01:22:18 LOG5 finish_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2008-Aug-10 01:22:18 INFO2 finish_task: DONE finished sending: tracking commands 2008-Aug-10 01:22:18 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 01:22:18 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Aug-10 01:22:18 LOG5 end_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2008-Aug-10 01:22:18 START begin_task: Starting task 'rotate ALFA to +88.6 degrees' 2008-Aug-10 01:22:18 LOG5 begin_task: Level: (3) ID = <10251> Status = 0 0 0 0 ok 2008-Aug-10 01:22:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +88.6 degrees ...} 2008-Aug-10 01:22:18 INFO2 rotate_alfa: ALFA commanded to +88.6 degrees 2008-Aug-10 01:22:18 LOG3 sock_errsend: To ALFAMOTOR: POSITION 88.6 REPLY 2008-Aug-10 01:22:18 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Aug-10 01:22:18 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Aug-10 01:22:18 LOG5 begin_task: Level: (4) ID = <10252> Status = 0 0 0 0 ok 2008-Aug-10 01:22:18 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7448_p3_090" 2008-Aug-10 01:22:18 LOG4 got_cormsg: From DATATAKING: set ra 285.14 2008-Aug-10 01:22:18 LOG4 got_cormsg: From DATATAKING: set dec 8.9708312044 2008-Aug-10 01:22:18 LOG4 got_cormsg: From DATATAKING: vw% 285.14 2008-Aug-10 01:22:18 LOG4 got_cormsg: From DATATAKING: vw% 8.9708312044 2008-Aug-10 01:22:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 01:22:18 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Aug-10 01:22:18 LOG4 got_cormsg: From DATATAKING: pnt tr 285.14 8.9708312044 -CF 2008-Aug-10 01:22:18 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Aug-10 01:22:18 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Aug-10 01:22:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 01:23:54 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Aug-10 01:23:54 INFO3 alfa_motor: ALFA rotator in-position +88.60 degrees 2008-Aug-10 01:23:54 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Aug-10 01:23:54 LOG5 end_task: Level: (4) ID = <10252> Status = 0 0 0 0 ok 2008-Aug-10 01:23:54 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Aug-10 01:23:54 STOP finish_task: Finishing task 'rotate ALFA to +88.6 degrees' 2008-Aug-10 01:23:54 LOG5 finish_task: Level: (3) ID = <10251> Status = 0 0 0 0 ok 2008-Aug-10 01:23:54 INFO2 finish_task: DONE finished configuration: rotating ALFA to +88.6 degrees 2008-Aug-10 01:23:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 01:23:54 STOP end_task: Finishing task 'rotate ALFA to +88.6 degrees' with status 'OK' 2008-Aug-10 01:23:54 LOG5 end_task: Level: (3) ID = <10251> Status = 0 0 0 0 ok 2008-Aug-10 01:23:54 START begin_task: Starting task 'waiting on telescope' 2008-Aug-10 01:23:54 LOG5 begin_task: Level: (3) ID = <10253> Status = 0 0 0 0 ok 2008-Aug-10 01:23:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Aug-10 01:23:54 LOG3 waittrk: Start waittrk 5 2008-Aug-10 01:23:54 START begin_task: Starting task 'waiting on telescope movement' 2008-Aug-10 01:23:54 LOG5 begin_task: Level: (4) ID = <10254> Status = 0 0 0 0 ok 2008-Aug-10 01:23:59 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Aug-10 01:23:59 LOG5 end_task: Level: (4) ID = <10254> Status = 0 0 0 0 ok 2008-Aug-10 01:23:59 START begin_task: Starting task 'waiting on telescope on source' 2008-Aug-10 01:23:59 LOG5 begin_task: Level: (4) ID = <10255> Status = 0 0 0 0 ok 2008-Aug-10 01:24:36 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Aug-10 01:24:36 LOG5 end_task: Level: (4) ID = <10255> Status = 0 0 0 0 ok 2008-Aug-10 01:24:36 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Aug-10 01:24:36 INFO2 waittrk: Now tracking AGES7448_p3_090 2008-Aug-10 01:24:36 LOG4 waittrk: Current telescope position: Az = 284.68 ZA = 8.96 2008-Aug-10 01:24:36 STOP finish_task: Finishing task 'waiting on telescope' 2008-Aug-10 01:24:36 LOG5 finish_task: Level: (3) ID = <10253> Status = 0 0 0 0 ok 2008-Aug-10 01:24:36 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Aug-10 01:24:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 01:24:36 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Aug-10 01:24:36 LOG5 end_task: Level: (3) ID = <10253> Status = 0 0 0 0 ok 2008-Aug-10 01:24:36 START begin_task: Starting task 'selecting calibration type' 2008-Aug-10 01:24:36 LOG5 begin_task: Level: (3) ID = <10256> Status = 0 0 0 0 ok 2008-Aug-10 01:24:36 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Aug-10 01:24:36 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Aug-10 01:24:36 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 01:24:36 START begin_task: Starting task 'waiting on setcal' 2008-Aug-10 01:24:36 LOG5 begin_task: Level: (4) ID = <10257> Status = 0 0 0 0 ok 2008-Aug-10 01:24:36 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Aug-10 01:24:36 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 01:24:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 01:24:37 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-10 01:24:37 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Aug-10 01:24:37 LOG5 end_task: Level: (4) ID = <10257> Status = 0 0 0 0 ok 2008-Aug-10 01:24:37 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Aug-10 01:24:37 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-10 01:24:37 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Aug-10 01:24:37 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-10 01:24:37 LOG5 begin_task: Level: (4) ID = <10258> Status = 0 0 0 0 ok 2008-Aug-10 01:24:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 01:24:38 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-10 01:24:38 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-10 01:24:38 LOG5 end_task: Level: (4) ID = <10258> Status = 0 0 0 0 ok 2008-Aug-10 01:24:38 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-10 01:24:38 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Aug-10 01:24:38 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-10 01:24:38 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Aug-10 01:24:38 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-10 01:24:38 LOG5 begin_task: Level: (4) ID = <10259> Status = 0 0 0 0 ok 2008-Aug-10 01:24:38 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-10 01:24:38 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-10 01:24:38 LOG5 end_task: Level: (4) ID = <10259> Status = 0 0 0 0 ok 2008-Aug-10 01:24:38 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-10 01:24:38 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Aug-10 01:24:38 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Aug-10 01:24:38 LOG5 end_task: Level: (3) ID = <10256> Status = 0 0 0 0 ok 2008-Aug-10 01:24:38 LOG5 dopset_later: Calling 'dopset_later 34.708770188641672' 2008-Aug-10 01:24:38 INFO3 dopset_later: Setting Doppler correction for 01:25:13 (34.7 seconds from now) 2008-Aug-10 01:24:38 LOG5 antvel: Calling 'antvel 285.140000 8.970831 F 34.708770188641672' 2008-Aug-10 01:24:38 LOG2 antvel: Transforming current Az = 285.14 ZA = 8.97 to apparent RA = 22:50:27.2 Dec = +15:48:20.9 2008-Aug-10 01:24:38 LOG2 antvel: Parameters to Doppler: Heliocentric 19513 2008 223 0.0 2008-Aug-10 01:24:38 INFO5 antvel: Computed antenna velocity: -14.50271 km/s 2008-Aug-10 01:24:38 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-14.5027097396 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Aug-10 01:24:38 INFO4 dopset_gen: New sky frequencies: 1381.310251 1381.310251 1381.310251 1381.310251 1381.310251 1381.310251 1381.310251 1381.310251 1381.310251 2008-Aug-10 01:24:38 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.310251 sky0=1381.310251 sky1=1381.310251 sky2=1381.310251 sky3=1381.310251 sky4=1381.310251 sky5=1381.310251 sky6=1381.310251 sky7=1381.310251 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-10 01:24:38 LOG2 dopset_gen: Result from 'sky2syn': 1631.310251 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-10 01:24:38 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631310251.0} 2008-Aug-10 01:24:38 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 01:24:38 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Aug-10 01:24:38 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Aug-10 01:24:38 INFO5 fixed_driftmap: Tracking J2000 position: RA = 22:49:30.0 Dec = +15:45:36.4 2008-Aug-10 01:24:38 LOG3 track_source: Calling 'track_source AGES7448_p3_090 224930.0 154536.4 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Aug-10 01:24:38 START begin_task: Starting task 'sending tracking commands' 2008-Aug-10 01:24:38 LOG5 begin_task: Level: (3) ID = <10260> Status = 0 0 0 0 ok 2008-Aug-10 01:24:38 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7448_p3_090} INFO {Slewing to source 'AGES7448_p3_090' ...} 2008-Aug-10 01:24:38 INFO1 track_source: Starting to track AGES7448_p3_090 2008-Aug-10 01:24:38 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7448_p3_090" 2008-Aug-10 01:24:38 LOG3 vw_send: To DATATAKING: set ra 224930.0 2008-Aug-10 01:24:38 LOG3 vw_send: To DATATAKING: set dec 154536.4 2008-Aug-10 01:24:38 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Aug-10 01:24:38 LOG3 vw_send: To DATATAKING: pnt tr 224930.0 154536.4 -CJ 2008-Aug-10 01:24:39 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Aug-10 01:24:39 STOP finish_task: Finishing task 'sending tracking commands' 2008-Aug-10 01:24:39 LOG5 finish_task: Level: (3) ID = <10260> Status = 0 0 0 0 ok 2008-Aug-10 01:24:39 INFO2 finish_task: DONE finished sending: tracking commands 2008-Aug-10 01:24:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 01:24:39 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Aug-10 01:24:39 LOG5 end_task: Level: (3) ID = <10260> Status = 0 0 0 0 ok 2008-Aug-10 01:24:39 START begin_task: Starting task 'waiting on telescope' 2008-Aug-10 01:24:39 LOG5 begin_task: Level: (3) ID = <10261> Status = 0 0 0 0 ok 2008-Aug-10 01:24:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Aug-10 01:24:39 LOG3 waittrk: Start waittrk 5 2008-Aug-10 01:24:39 START begin_task: Starting task 'waiting on telescope movement' 2008-Aug-10 01:24:39 LOG5 begin_task: Level: (4) ID = <10262> Status = 0 0 0 0 ok 2008-Aug-10 01:24:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631310251.0} 2008-Aug-10 01:24:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 01:24:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 01:24:39 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7448_p3_090" 2008-Aug-10 01:24:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 01:24:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 01:24:39 LOG4 got_cormsg: From DATATAKING: set ra 224930.0 2008-Aug-10 01:24:39 LOG4 got_cormsg: From DATATAKING: set dec 154536.4 2008-Aug-10 01:24:39 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Aug-10 01:24:39 LOG4 got_cormsg: From DATATAKING: pnt tr 224930.0 154536.4 -CJ 2008-Aug-10 01:24:39 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Aug-10 01:24:39 LOG4 got_cormsg: From DATATAKING: 224930.0 2008-Aug-10 01:24:39 LOG4 got_cormsg: From DATATAKING: vw% 154536.4 2008-Aug-10 01:24:39 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2008-Aug-10 01:24:44 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Aug-10 01:24:44 LOG5 end_task: Level: (4) ID = <10262> Status = 0 0 0 0 ok 2008-Aug-10 01:24:44 START begin_task: Starting task 'waiting on telescope on source' 2008-Aug-10 01:24:44 LOG5 begin_task: Level: (4) ID = <10263> Status = 0 0 0 0 ok 2008-Aug-10 01:24:47 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Aug-10 01:24:47 LOG5 end_task: Level: (4) ID = <10263> Status = 0 0 0 0 ok 2008-Aug-10 01:24:47 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Aug-10 01:24:47 INFO2 waittrk: Now tracking AGES7448_p3_090 2008-Aug-10 01:24:47 LOG4 waittrk: Current telescope position: Az = 284.71 ZA = 8.94 2008-Aug-10 01:24:47 STOP finish_task: Finishing task 'waiting on telescope' 2008-Aug-10 01:24:47 LOG5 finish_task: Level: (3) ID = <10261> Status = 0 0 0 0 ok 2008-Aug-10 01:24:47 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Aug-10 01:24:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 01:24:47 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Aug-10 01:24:47 LOG5 end_task: Level: (3) ID = <10261> Status = 0 0 0 0 ok 2008-Aug-10 01:24:47 START begin_task: Starting task 'adjusting WAPP power' 2008-Aug-10 01:24:47 LOG5 begin_task: Level: (3) ID = <10264> Status = 0 0 0 0 ok 2008-Aug-10 01:24:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Aug-10 01:24:47 INFO2 adjust_power: Starting to adjust WAPP power 2008-Aug-10 01:24:47 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Aug-10 01:24:47 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Aug-10 01:24:47 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 01:24:47 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Aug-10 01:24:47 LOG5 begin_task: Level: (4) ID = <10265> Status = 0 0 0 0 ok 2008-Aug-10 01:24:47 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Aug-10 01:24:47 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 01:24:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 01:24:50 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-10 01:24:50 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Aug-10 01:24:50 LOG5 end_task: Level: (4) ID = <10265> Status = 0 0 0 0 ok 2008-Aug-10 01:24:50 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Aug-10 01:24:50 START begin_task: Starting task 'adjusting WAPP power' 2008-Aug-10 01:24:50 LOG5 begin_task: Level: (4) ID = <10266> Status = 0 0 0 0 ok 2008-Aug-10 01:24:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Aug-10 01:24:50 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Aug-10 01:24:50 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Aug-10 01:24:50 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Aug-10 01:24:50 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Aug-10 01:24:50 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Aug-10 01:24:50 LOG5 begin_task: Level: (5) ID = <10267> Status = 0 0 0 0 ok 2008-Aug-10 01:24:50 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Aug-10 01:24:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 01:24:50 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 6 dB 2008-Aug-10 01:24:50 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 2 dB --- beam 5: 5 5 dB 2008-Aug-10 01:24:51 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 3 dB --- beam 3: 3 2 dB 2008-Aug-10 01:24:51 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 2 dB --- beam 7: 2 2 dB 2008-Aug-10 01:24:51 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Aug-10 01:24:51 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Aug-10 01:24:51 LOG5 end_task: Level: (5) ID = <10267> Status = 0 0 0 0 ok 2008-Aug-10 01:24:51 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.983 0.990 ALFA beam 1: 0.958 0.925 2008-Aug-10 01:24:51 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.908 1.121 ALFA beam 3: 1.072 1.100 2008-Aug-10 01:24:51 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.057 1.037 ALFA beam 5: 1.018 0.927 2008-Aug-10 01:24:51 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.031 0.945 ALFA beam 7: 0.909 1.044 2008-Aug-10 01:24:51 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Aug-10 01:24:51 LOG5 finish_task: Level: (4) ID = <10266> Status = 0 0 0 0 ok 2008-Aug-10 01:24:51 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Aug-10 01:24:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 01:24:51 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Aug-10 01:24:51 LOG5 end_task: Level: (4) ID = <10266> Status = 0 0 0 0 ok 2008-Aug-10 01:24:51 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Aug-10 01:24:51 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Aug-10 01:24:51 LOG5 finish_task: Level: (3) ID = <10264> Status = 0 0 0 0 ok 2008-Aug-10 01:24:51 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Aug-10 01:24:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 01:24:51 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Aug-10 01:24:51 LOG5 end_task: Level: (3) ID = <10264> Status = 0 0 0 0 ok 2008-Aug-10 01:24:51 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 RM 2008-Aug-10 01:24:51 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 RM 2008-Aug-10 01:24:51 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 RM 2008-Aug-10 01:24:51 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 RM 2008-Aug-10 01:24:51 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Aug-10 01:24:51 START begin_task: Starting task 'WAPP calibration' 2008-Aug-10 01:24:51 LOG5 begin_task: Level: (3) ID = <10268> Status = 0 0 0 0 ok 2008-Aug-10 01:24:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Aug-10 01:24:51 START begin_task: Starting task 'selecting calibration type' 2008-Aug-10 01:24:51 LOG5 begin_task: Level: (4) ID = <10269> Status = 0 0 0 0 ok 2008-Aug-10 01:24:51 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Aug-10 01:24:51 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Aug-10 01:24:51 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 01:24:51 START begin_task: Starting task 'waiting on setcal' 2008-Aug-10 01:24:51 LOG5 begin_task: Level: (5) ID = <10270> Status = 0 0 0 0 ok 2008-Aug-10 01:24:51 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 RM' 2008-Aug-10 01:24:51 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Aug-10 01:24:51 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 01:24:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 01:24:51 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-10 01:24:51 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Aug-10 01:24:51 LOG5 end_task: Level: (5) ID = <10270> Status = 0 0 0 0 ok 2008-Aug-10 01:24:51 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Aug-10 01:24:51 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-10 01:24:51 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Aug-10 01:24:51 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-10 01:24:51 LOG5 begin_task: Level: (5) ID = <10271> Status = 0 0 0 0 ok 2008-Aug-10 01:24:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 01:24:51 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-10 01:24:51 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-10 01:24:51 LOG5 end_task: Level: (5) ID = <10271> Status = 0 0 0 0 ok 2008-Aug-10 01:24:51 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-10 01:24:51 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Aug-10 01:24:51 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-10 01:24:51 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Aug-10 01:24:51 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-10 01:24:51 LOG5 begin_task: Level: (5) ID = <10272> Status = 0 0 0 0 ok 2008-Aug-10 01:24:51 NOTE WAPPDATA-new_file: New FITS file: wapp.20080810.a2048.0004.fits 2008-Aug-10 01:24:52 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-10 01:24:52 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-10 01:24:52 LOG5 end_task: Level: (5) ID = <10272> Status = 0 0 0 0 ok 2008-Aug-10 01:24:52 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-10 01:24:52 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Aug-10 01:24:52 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Aug-10 01:24:52 LOG5 end_task: Level: (4) ID = <10269> Status = 0 0 0 0 ok 2008-Aug-10 01:24:52 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Aug-10 01:24:52 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Aug-10 01:24:52 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Aug-10 01:24:52 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-10 01:24:52 LOG5 begin_task: Level: (4) ID = <10273> Status = 0 0 0 0 ok 2008-Aug-10 01:24:52 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080810.a2048.0004.fits} 2008-Aug-10 01:24:52 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-10 01:24:52 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Aug-10 01:24:52 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-10 01:24:52 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-10 01:24:52 LOG5 end_task: Level: (4) ID = <10273> Status = 0 0 0 0 ok 2008-Aug-10 01:24:52 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Aug-10 01:24:52 LOG4 take_data: Calling 'take_data 5 5 CAL ON -' 2008-Aug-10 01:24:52 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-10 01:24:52 LOG5 begin_task: Level: (4) ID = <10274> Status = 0 0 0 0 ok 2008-Aug-10 01:24:52 LOG5 log_alfabeam: Parameters: 22.824999999999999 15.76011111111111 22.234875 2008.6107020495856 88.599899 2008-Aug-10 01:24:52 LOG4 log_alfabeam: ALFABEAM 0 22.825000000000003 15.760111111111113 2008-Aug-10 01:24:52 LOG4 log_alfabeam: ALFABEAM 1 22.822961173695358 15.851062215763561 2008-Aug-10 01:24:52 LOG4 log_alfabeam: ALFABEAM 2 22.817921639534703 15.790708782366609 2008-Aug-10 01:24:52 LOG4 log_alfabeam: ALFABEAM 3 22.819915432485551 15.699929854802486 2008-Aug-10 01:24:52 LOG4 log_alfabeam: ALFABEAM 4 22.826971991373934 15.668446822297012 2008-Aug-10 01:24:52 LOG4 log_alfabeam: ALFABEAM 5 22.832077314801850 15.729512525757535 2008-Aug-10 01:24:52 LOG4 log_alfabeam: ALFABEAM 6 22.830059796640516 15.821351555223290 2008-Aug-10 01:24:52 INFO2 take_data: Starting WAPP scan: 822300056 2008-Aug-10 01:24:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Aug-10 01:24:52 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-10 01:24:52 LOG5 begin_task: Level: (5) ID = <10275> Status = 0 0 0 0 ok 2008-Aug-10 01:24:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-10 01:24:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19493.00 2008-Aug-10 01:24:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.310251 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-10 01:24:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.310251 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 01:24:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.310251 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 01:24:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.310251 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 01:24:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.310251 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 01:24:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.310251 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 01:24:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.310251 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 01:24:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.310251 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 01:24:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.310251 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 01:24:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-10 01:24:58 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-10 01:24:58 LOG5 end_task: Level: (5) ID = <10275> Status = 0 0 0 0 ok 2008-Aug-10 01:24:58 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-10 01:24:58 LOG5 end_task: Level: (4) ID = <10274> Status = 0 0 0 0 ok 2008-Aug-10 01:24:58 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Aug-10 01:24:58 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Aug-10 01:24:58 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Aug-10 01:24:58 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-10 01:24:58 LOG5 begin_task: Level: (4) ID = <10276> Status = 0 0 0 0 ok 2008-Aug-10 01:24:58 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-10 01:24:58 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-10 01:24:58 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-10 01:24:58 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-10 01:24:58 LOG5 end_task: Level: (4) ID = <10276> Status = 0 0 0 0 ok 2008-Aug-10 01:24:58 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Aug-10 01:24:58 LOG4 take_data: Calling 'take_data 5 5 CAL OFF -' 2008-Aug-10 01:24:58 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-10 01:24:58 LOG5 begin_task: Level: (4) ID = <10277> Status = 0 0 0 0 ok 2008-Aug-10 01:24:58 LOG5 log_alfabeam: Parameters: 22.824999999999999 15.76011111111111 22.236825 2008.610702271402 88.599899 2008-Aug-10 01:24:58 LOG4 log_alfabeam: ALFABEAM 0 22.824999999999992 15.760111111111117 2008-Aug-10 01:24:58 LOG4 log_alfabeam: ALFABEAM 1 22.822966255927081 15.851085283150848 2008-Aug-10 01:24:58 LOG4 log_alfabeam: ALFABEAM 2 22.817923384403137 15.790792833176479 2008-Aug-10 01:24:58 LOG4 log_alfabeam: ALFABEAM 3 22.819911966693411 15.699991864822508 2008-Aug-10 01:24:58 LOG4 log_alfabeam: ALFABEAM 4 22.826966674096244 15.668422383074716 2008-Aug-10 01:24:58 LOG4 log_alfabeam: ALFABEAM 5 22.832075570815338 15.729428641729417 2008-Aug-10 01:24:58 LOG4 log_alfabeam: ALFABEAM 6 22.830063238499545 15.821293158163204 2008-Aug-10 01:24:58 INFO2 take_data: Starting WAPP scan: 822300057 2008-Aug-10 01:24:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Aug-10 01:24:59 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-10 01:24:59 LOG5 begin_task: Level: (5) ID = <10278> Status = 0 0 0 0 ok 2008-Aug-10 01:24:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-10 01:24:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19500.00 2008-Aug-10 01:25:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.310251 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-10 01:25:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.310251 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 01:25:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.310251 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 01:25:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.310251 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 01:25:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.310251 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 01:25:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.310251 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 01:25:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.310251 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 01:25:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.310251 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 01:25:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.310251 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 01:25:05 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Aug-10 01:25:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-10 01:25:05 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-10 01:25:05 LOG5 end_task: Level: (5) ID = <10278> Status = 0 0 0 0 ok 2008-Aug-10 01:25:05 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-10 01:25:05 LOG5 end_task: Level: (4) ID = <10277> Status = 0 0 0 0 ok 2008-Aug-10 01:25:05 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Aug-10 01:25:05 STOP finish_task: Finishing task 'WAPP calibration' 2008-Aug-10 01:25:05 LOG5 finish_task: Level: (3) ID = <10268> Status = 0 0 0 0 ok 2008-Aug-10 01:25:05 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Aug-10 01:25:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 01:25:05 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Aug-10 01:25:05 LOG5 end_task: Level: (3) ID = <10268> Status = 0 0 0 0 ok 2008-Aug-10 01:25:05 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Aug-10 01:25:06 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 285.14 and ZA = 8.97 2008-Aug-10 01:25:06 LOG3 track_source: Calling 'track_source AGES7448_p3_090 285.14 8.9708312044 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Aug-10 01:25:06 START begin_task: Starting task 'sending tracking commands' 2008-Aug-10 01:25:06 LOG5 begin_task: Level: (3) ID = <10279> Status = 0 0 0 0 ok 2008-Aug-10 01:25:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7448_p3_090} INFO {Slewing to source 'AGES7448_p3_090' ...} 2008-Aug-10 01:25:06 INFO1 track_source: Starting to track AGES7448_p3_090 2008-Aug-10 01:25:06 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7448_p3_090" 2008-Aug-10 01:25:06 LOG3 vw_send: To DATATAKING: set ra 285.14 2008-Aug-10 01:25:06 LOG3 vw_send: To DATATAKING: set dec 8.9708312044 2008-Aug-10 01:25:06 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Aug-10 01:25:06 LOG3 vw_send: To DATATAKING: pnt tr 285.14 8.9708312044 -CF 2008-Aug-10 01:25:06 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Aug-10 01:25:06 STOP finish_task: Finishing task 'sending tracking commands' 2008-Aug-10 01:25:06 LOG5 finish_task: Level: (3) ID = <10279> Status = 0 0 0 0 ok 2008-Aug-10 01:25:06 INFO2 finish_task: DONE finished sending: tracking commands 2008-Aug-10 01:25:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 01:25:06 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Aug-10 01:25:06 LOG5 end_task: Level: (3) ID = <10279> Status = 0 0 0 0 ok 2008-Aug-10 01:25:06 LOG1 fixed_driftmap: Parameters: HA = -00:36:00.0 Start = 22:14:27.3 LST = 22:14:19.6 diff = 7.7 secs 2008-Aug-10 01:25:06 INFO2 fixed_driftmap: Waiting 5.7 seconds for RA 22:50:27 2008-Aug-10 01:25:06 INFO2 lstwait: Waiting for 5.7 secs from LST 22:14:20 to LST 22:14:25 ... 2008-Aug-10 01:25:06 LOG4 send_obs_status: To obs_status: <1> TASKTIME 5.7125582068857437 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Aug-10 01:25:06 START begin_task: Starting task 'waiting on wait on LST' 2008-Aug-10 01:25:06 LOG5 begin_task: Level: (3) ID = <10280> Status = 0 0 0 0 ok 2008-Aug-10 01:25:06 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7448_p3_090" 2008-Aug-10 01:25:06 LOG4 got_cormsg: From DATATAKING: set ra 285.14 2008-Aug-10 01:25:06 LOG4 got_cormsg: From DATATAKING: set dec 8.9708312044 2008-Aug-10 01:25:06 LOG4 got_cormsg: From DATATAKING: vw% 285.14 2008-Aug-10 01:25:06 LOG4 got_cormsg: From DATATAKING: vw% 8.9708312044 2008-Aug-10 01:25:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 01:25:06 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Aug-10 01:25:06 LOG4 got_cormsg: From DATATAKING: pnt tr 285.14 8.9708312044 -CF 2008-Aug-10 01:25:06 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Aug-10 01:25:06 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Aug-10 01:25:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 01:25:12 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Aug-10 01:25:12 LOG5 end_task: Level: (3) ID = <10280> Status = 0 0 0 0 ok 2008-Aug-10 01:25:12 LOG4 lstwait: Finished waiting 0.29 seconds late 2008-Aug-10 01:25:12 INFO3 lstwait: Finished waiting 2008-Aug-10 01:25:12 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Aug-10 01:25:12 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Aug-10 01:25:12 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Aug-10 01:25:12 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Aug-10 01:25:12 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Aug-10 01:25:12 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ -' 2008-Aug-10 01:25:12 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-10 01:25:12 LOG5 begin_task: Level: (3) ID = <10281> Status = 0 0 0 0 ok 2008-Aug-10 01:25:12 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-10 01:25:12 INFO2 take_data: Starting WAPP scan: 822300058 2008-Aug-10 01:25:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Aug-10 01:25:12 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-10 01:25:12 LOG5 begin_task: Level: (4) ID = <10282> Status = 0 0 0 0 ok 2008-Aug-10 01:25:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-10 01:25:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19513.00 2008-Aug-10 01:25:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.310251 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-10 01:25:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.310251 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 01:25:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.310251 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 01:25:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.310251 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 01:25:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.310251 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 01:25:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.310251 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 01:25:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.310251 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 01:25:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.310251 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 01:25:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.310251 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 01:25:14 WARNING WAPP=1+2+3+4-start_spectra: WARNING observing when not on source 2008-Aug-10 01:25:18 NOTE WAPP=1+2+3+4-start_spectra: Observing now on source 2008-Aug-10 01:45:13 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-10 01:45:13 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-10 01:45:13 LOG5 end_task: Level: (4) ID = <10282> Status = 0 0 0 0 ok 2008-Aug-10 01:45:13 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-10 01:45:13 LOG5 end_task: Level: (3) ID = <10281> Status = 0 0 0 0 ok 2008-Aug-10 01:45:13 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Aug-10 01:45:13 LOG5 finish_task: Level: (2) ID = <10249> Status = 0 0 0 0 ok 2008-Aug-10 01:45:13 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Aug-10 01:45:13 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Aug-10 01:45:13 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Aug-10 01:45:13 LOG5 end_task: Level: (2) ID = <10249> Status = 0 0 0 0 ok 2008-Aug-10 01:45:13 COMMAND run_command_line: EXECUTING command 19: 'ENDIF' 2008-Aug-10 01:45:13 COMMAND run_command_line: EXECUTING command 22: 'IF LSTSLEW(AGES7448_p3_092) < 223726 THEN' 2008-Aug-10 01:45:14 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES7448_p3_092) < 223726 2008-Aug-10 01:45:14 INFO5 is_if_valid: Condition parsed as: 22.605249000000001 < 22.623888888888889 2008-Aug-10 01:45:14 COMMAND run_command_line: EXECUTING command 23: 'FIXEDDRIFT az=309.41 alfaangle=64.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p3_092 ra=225000.00 dec=154230.00' 2008-Aug-10 01:45:14 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Aug-10 01:45:14 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Aug-10 01:45:14 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 309.41 64.3 hcorcal 5 tracking no first 1 AGES7448_p3_092 225000.00 154230.00 J 8500.0 Heliocentric velocity(optical)' 2008-Aug-10 01:45:14 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Aug-10 01:45:14 LOG5 begin_task: Level: (2) ID = <10283> Status = 0 0 0 0 ok 2008-Aug-10 01:45:14 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES7448_p3_090' 2008-Aug-10 01:45:14 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Aug-10 01:45:15 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES7448_p3_092} 2008-Aug-10 01:45:15 INFO3 fixed_driftmap: Sending telescope to Az = 309.41 and ZA = 4.05 2008-Aug-10 01:45:15 LOG3 track_source: Calling 'track_source AGES7448_p3_092 309.41 4.0501523211 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Aug-10 01:45:15 START begin_task: Starting task 'sending tracking commands' 2008-Aug-10 01:45:15 LOG5 begin_task: Level: (3) ID = <10284> Status = 0 0 0 0 ok 2008-Aug-10 01:45:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7448_p3_092} INFO {Slewing to source 'AGES7448_p3_092' ...} 2008-Aug-10 01:45:15 INFO1 track_source: Starting to track AGES7448_p3_092 2008-Aug-10 01:45:15 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7448_p3_092" 2008-Aug-10 01:45:15 LOG3 vw_send: To DATATAKING: set ra 309.41 2008-Aug-10 01:45:15 LOG3 vw_send: To DATATAKING: set dec 4.0501523211 2008-Aug-10 01:45:15 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Aug-10 01:45:15 LOG3 vw_send: To DATATAKING: pnt tr 309.41 4.0501523211 -CF 2008-Aug-10 01:45:15 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Aug-10 01:45:15 STOP finish_task: Finishing task 'sending tracking commands' 2008-Aug-10 01:45:15 LOG5 finish_task: Level: (3) ID = <10284> Status = 0 0 0 0 ok 2008-Aug-10 01:45:15 INFO2 finish_task: DONE finished sending: tracking commands 2008-Aug-10 01:45:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 01:45:15 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Aug-10 01:45:15 LOG5 end_task: Level: (3) ID = <10284> Status = 0 0 0 0 ok 2008-Aug-10 01:45:15 START begin_task: Starting task 'rotate ALFA to +64.3 degrees' 2008-Aug-10 01:45:15 LOG5 begin_task: Level: (3) ID = <10285> Status = 0 0 0 0 ok 2008-Aug-10 01:45:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +64.3 degrees ...} 2008-Aug-10 01:45:15 INFO2 rotate_alfa: ALFA commanded to +64.3 degrees 2008-Aug-10 01:45:15 LOG3 sock_errsend: To ALFAMOTOR: POSITION 64.3 REPLY 2008-Aug-10 01:45:15 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Aug-10 01:45:15 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Aug-10 01:45:15 LOG5 begin_task: Level: (4) ID = <10286> Status = 0 0 0 0 ok 2008-Aug-10 01:45:15 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7448_p3_092" 2008-Aug-10 01:45:15 LOG4 got_cormsg: From DATATAKING: set ra 309.41 2008-Aug-10 01:45:15 LOG4 got_cormsg: From DATATAKING: set dec 4.0501523211 2008-Aug-10 01:45:15 LOG4 got_cormsg: From DATATAKING: vw% 309.41 2008-Aug-10 01:45:15 LOG4 got_cormsg: From DATATAKING: vw% 4.0501523211 2008-Aug-10 01:45:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 01:45:15 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Aug-10 01:45:15 LOG4 got_cormsg: From DATATAKING: pnt tr 309.41 4.0501523211 -CF 2008-Aug-10 01:45:15 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Aug-10 01:45:15 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Aug-10 01:45:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 01:45:30 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Aug-10 01:45:30 INFO3 alfa_motor: ALFA rotator in-position +64.30 degrees 2008-Aug-10 01:45:30 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Aug-10 01:45:30 LOG5 end_task: Level: (4) ID = <10286> Status = 0 0 0 0 ok 2008-Aug-10 01:45:30 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Aug-10 01:45:30 STOP finish_task: Finishing task 'rotate ALFA to +64.3 degrees' 2008-Aug-10 01:45:30 LOG5 finish_task: Level: (3) ID = <10285> Status = 0 0 0 0 ok 2008-Aug-10 01:45:30 INFO2 finish_task: DONE finished configuration: rotating ALFA to +64.3 degrees 2008-Aug-10 01:45:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 01:45:30 STOP end_task: Finishing task 'rotate ALFA to +64.3 degrees' with status 'OK' 2008-Aug-10 01:45:30 LOG5 end_task: Level: (3) ID = <10285> Status = 0 0 0 0 ok 2008-Aug-10 01:45:30 START begin_task: Starting task 'waiting on telescope' 2008-Aug-10 01:45:30 LOG5 begin_task: Level: (3) ID = <10287> Status = 0 0 0 0 ok 2008-Aug-10 01:45:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Aug-10 01:45:30 LOG3 waittrk: Start waittrk 5 2008-Aug-10 01:45:30 START begin_task: Starting task 'waiting on telescope movement' 2008-Aug-10 01:45:30 LOG5 begin_task: Level: (4) ID = <10288> Status = 0 0 0 0 ok 2008-Aug-10 01:45:35 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Aug-10 01:45:35 LOG5 end_task: Level: (4) ID = <10288> Status = 0 0 0 0 ok 2008-Aug-10 01:45:35 START begin_task: Starting task 'waiting on telescope on source' 2008-Aug-10 01:45:35 LOG5 begin_task: Level: (4) ID = <10289> Status = 0 0 0 0 ok 2008-Aug-10 01:47:23 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Aug-10 01:47:23 LOG5 end_task: Level: (4) ID = <10289> Status = 0 0 0 0 ok 2008-Aug-10 01:47:23 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Aug-10 01:47:23 INFO2 waittrk: Now tracking AGES7448_p3_092 2008-Aug-10 01:47:23 LOG4 waittrk: Current telescope position: Az = 308.86 ZA = 4.03 2008-Aug-10 01:47:23 STOP finish_task: Finishing task 'waiting on telescope' 2008-Aug-10 01:47:23 LOG5 finish_task: Level: (3) ID = <10287> Status = 0 0 0 0 ok 2008-Aug-10 01:47:23 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Aug-10 01:47:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 01:47:23 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Aug-10 01:47:23 LOG5 end_task: Level: (3) ID = <10287> Status = 0 0 0 0 ok 2008-Aug-10 01:47:23 START begin_task: Starting task 'selecting calibration type' 2008-Aug-10 01:47:23 LOG5 begin_task: Level: (3) ID = <10290> Status = 0 0 0 0 ok 2008-Aug-10 01:47:23 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Aug-10 01:47:23 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Aug-10 01:47:23 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 01:47:23 START begin_task: Starting task 'waiting on setcal' 2008-Aug-10 01:47:23 LOG5 begin_task: Level: (4) ID = <10291> Status = 0 0 0 0 ok 2008-Aug-10 01:47:23 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Aug-10 01:47:23 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 01:47:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 01:47:25 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-10 01:47:25 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Aug-10 01:47:25 LOG5 end_task: Level: (4) ID = <10291> Status = 0 0 0 0 ok 2008-Aug-10 01:47:25 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Aug-10 01:47:25 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-10 01:47:25 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Aug-10 01:47:25 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-10 01:47:25 LOG5 begin_task: Level: (4) ID = <10292> Status = 0 0 0 0 ok 2008-Aug-10 01:47:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 01:47:25 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-10 01:47:25 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-10 01:47:25 LOG5 end_task: Level: (4) ID = <10292> Status = 0 0 0 0 ok 2008-Aug-10 01:47:25 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-10 01:47:25 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Aug-10 01:47:25 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-10 01:47:25 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Aug-10 01:47:25 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-10 01:47:25 LOG5 begin_task: Level: (4) ID = <10293> Status = 0 0 0 0 ok 2008-Aug-10 01:47:25 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-10 01:47:25 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-10 01:47:25 LOG5 end_task: Level: (4) ID = <10293> Status = 0 0 0 0 ok 2008-Aug-10 01:47:25 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-10 01:47:25 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Aug-10 01:47:25 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Aug-10 01:47:25 LOG5 end_task: Level: (3) ID = <10290> Status = 0 0 0 0 ok 2008-Aug-10 01:47:25 LOG5 dopset_later: Calling 'dopset_later 44.834707672508664' 2008-Aug-10 01:47:25 INFO3 dopset_later: Setting Doppler correction for 01:48:09 (44.8 seconds from now) 2008-Aug-10 01:47:25 LOG5 antvel: Calling 'antvel 309.410000 4.050152 F 44.834707672508664' 2008-Aug-10 01:47:25 LOG2 antvel: Transforming current Az = 309.41 ZA = 4.05 to apparent RA = 22:50:27.2 Dec = +15:45:21.0 2008-Aug-10 01:47:25 LOG2 antvel: Parameters to Doppler: Heliocentric 20889 2008 223 0.0 2008-Aug-10 01:47:25 INFO5 antvel: Computed antenna velocity: -14.44965 km/s 2008-Aug-10 01:47:25 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-14.449654656 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Aug-10 01:47:25 INFO4 dopset_gen: New sky frequencies: 1381.310006 1381.310006 1381.310006 1381.310006 1381.310006 1381.310006 1381.310006 1381.310006 1381.310006 2008-Aug-10 01:47:25 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.310006 sky0=1381.310006 sky1=1381.310006 sky2=1381.310006 sky3=1381.310006 sky4=1381.310006 sky5=1381.310006 sky6=1381.310006 sky7=1381.310006 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-10 01:47:25 LOG2 dopset_gen: Result from 'sky2syn': 1631.310006 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-10 01:47:25 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631310006.0} 2008-Aug-10 01:47:25 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 01:47:25 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Aug-10 01:47:25 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Aug-10 01:47:25 INFO5 fixed_driftmap: Tracking J2000 position: RA = 22:49:19.9 Dec = +15:42:36.5 2008-Aug-10 01:47:25 LOG3 track_source: Calling 'track_source AGES7448_p3_092 224919.9 154236.5 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Aug-10 01:47:25 START begin_task: Starting task 'sending tracking commands' 2008-Aug-10 01:47:25 LOG5 begin_task: Level: (3) ID = <10294> Status = 0 0 0 0 ok 2008-Aug-10 01:47:25 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7448_p3_092} INFO {Slewing to source 'AGES7448_p3_092' ...} 2008-Aug-10 01:47:25 INFO1 track_source: Starting to track AGES7448_p3_092 2008-Aug-10 01:47:25 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7448_p3_092" 2008-Aug-10 01:47:25 LOG3 vw_send: To DATATAKING: set ra 224919.9 2008-Aug-10 01:47:25 LOG3 vw_send: To DATATAKING: set dec 154236.5 2008-Aug-10 01:47:25 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Aug-10 01:47:25 LOG3 vw_send: To DATATAKING: pnt tr 224919.9 154236.5 -CJ 2008-Aug-10 01:47:25 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Aug-10 01:47:25 STOP finish_task: Finishing task 'sending tracking commands' 2008-Aug-10 01:47:25 LOG5 finish_task: Level: (3) ID = <10294> Status = 0 0 0 0 ok 2008-Aug-10 01:47:25 INFO2 finish_task: DONE finished sending: tracking commands 2008-Aug-10 01:47:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 01:47:25 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Aug-10 01:47:25 LOG5 end_task: Level: (3) ID = <10294> Status = 0 0 0 0 ok 2008-Aug-10 01:47:25 START begin_task: Starting task 'waiting on telescope' 2008-Aug-10 01:47:25 LOG5 begin_task: Level: (3) ID = <10295> Status = 0 0 0 0 ok 2008-Aug-10 01:47:25 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Aug-10 01:47:25 LOG3 waittrk: Start waittrk 5 2008-Aug-10 01:47:25 START begin_task: Starting task 'waiting on telescope movement' 2008-Aug-10 01:47:25 LOG5 begin_task: Level: (4) ID = <10296> Status = 0 0 0 0 ok 2008-Aug-10 01:47:25 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631310006.0} 2008-Aug-10 01:47:25 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 01:47:25 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7448_p3_092" 2008-Aug-10 01:47:25 LOG4 got_cormsg: From DATATAKING: set ra 224919.9 2008-Aug-10 01:47:25 LOG4 got_cormsg: From DATATAKING: set dec 154236.5 2008-Aug-10 01:47:25 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Aug-10 01:47:25 LOG4 got_cormsg: From DATATAKING: vw% 224919.9 2008-Aug-10 01:47:25 LOG4 got_cormsg: From DATATAKING: vw% 154236.5 2008-Aug-10 01:47:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 01:47:25 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Aug-10 01:47:25 LOG4 got_cormsg: From DATATAKING: pnt tr 224919.9 154236.5 -CJ 2008-Aug-10 01:47:25 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Aug-10 01:47:25 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Aug-10 01:47:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 01:47:30 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Aug-10 01:47:30 LOG5 end_task: Level: (4) ID = <10296> Status = 0 0 0 0 ok 2008-Aug-10 01:47:30 START begin_task: Starting task 'waiting on telescope on source' 2008-Aug-10 01:47:30 LOG5 begin_task: Level: (4) ID = <10297> Status = 0 0 0 0 ok 2008-Aug-10 01:47:36 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Aug-10 01:47:36 LOG5 end_task: Level: (4) ID = <10297> Status = 0 0 0 0 ok 2008-Aug-10 01:47:37 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Aug-10 01:47:37 INFO2 waittrk: Now tracking AGES7448_p3_092 2008-Aug-10 01:47:37 LOG4 waittrk: Current telescope position: Az = 309.14 ZA = 4.00 2008-Aug-10 01:47:37 STOP finish_task: Finishing task 'waiting on telescope' 2008-Aug-10 01:47:37 LOG5 finish_task: Level: (3) ID = <10295> Status = 0 0 0 0 ok 2008-Aug-10 01:47:37 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Aug-10 01:47:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 01:47:37 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Aug-10 01:47:37 LOG5 end_task: Level: (3) ID = <10295> Status = 0 0 0 0 ok 2008-Aug-10 01:47:37 START begin_task: Starting task 'adjusting WAPP power' 2008-Aug-10 01:47:37 LOG5 begin_task: Level: (3) ID = <10298> Status = 0 0 0 0 ok 2008-Aug-10 01:47:37 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Aug-10 01:47:37 INFO2 adjust_power: Starting to adjust WAPP power 2008-Aug-10 01:47:37 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Aug-10 01:47:37 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Aug-10 01:47:37 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 01:47:37 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Aug-10 01:47:37 LOG5 begin_task: Level: (4) ID = <10299> Status = 0 0 0 0 ok 2008-Aug-10 01:47:37 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Aug-10 01:47:37 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 01:47:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 01:47:40 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-10 01:47:40 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Aug-10 01:47:40 LOG5 end_task: Level: (4) ID = <10299> Status = 0 0 0 0 ok 2008-Aug-10 01:47:40 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Aug-10 01:47:40 START begin_task: Starting task 'adjusting WAPP power' 2008-Aug-10 01:47:40 LOG5 begin_task: Level: (4) ID = <10300> Status = 0 0 0 0 ok 2008-Aug-10 01:47:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Aug-10 01:47:40 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Aug-10 01:47:40 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Aug-10 01:47:40 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Aug-10 01:47:40 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Aug-10 01:47:40 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Aug-10 01:47:40 LOG5 begin_task: Level: (5) ID = <10301> Status = 0 0 0 0 ok 2008-Aug-10 01:47:40 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Aug-10 01:47:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 01:47:40 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 6 dB 2008-Aug-10 01:47:40 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 2 dB --- beam 5: 5 5 dB 2008-Aug-10 01:47:40 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 5 3 dB --- beam 3: 3 2 dB 2008-Aug-10 01:47:40 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 2 dB --- beam 7: 2 2 dB 2008-Aug-10 01:47:40 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Aug-10 01:47:40 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Aug-10 01:47:40 LOG5 end_task: Level: (5) ID = <10301> Status = 0 0 0 0 ok 2008-Aug-10 01:47:40 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.955 0.972 ALFA beam 1: 0.923 0.898 2008-Aug-10 01:47:40 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.067 1.056 ALFA beam 3: 1.031 1.065 2008-Aug-10 01:47:40 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.053 1.030 ALFA beam 5: 1.008 0.920 2008-Aug-10 01:47:40 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.030 0.933 ALFA beam 7: 0.908 1.029 2008-Aug-10 01:47:40 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Aug-10 01:47:40 LOG5 finish_task: Level: (4) ID = <10300> Status = 0 0 0 0 ok 2008-Aug-10 01:47:40 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Aug-10 01:47:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 01:47:40 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Aug-10 01:47:40 LOG5 end_task: Level: (4) ID = <10300> Status = 0 0 0 0 ok 2008-Aug-10 01:47:40 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Aug-10 01:47:40 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Aug-10 01:47:40 LOG5 finish_task: Level: (3) ID = <10298> Status = 0 0 0 0 ok 2008-Aug-10 01:47:40 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Aug-10 01:47:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 01:47:40 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Aug-10 01:47:40 LOG5 end_task: Level: (3) ID = <10298> Status = 0 0 0 0 ok 2008-Aug-10 01:47:40 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 RM 2008-Aug-10 01:47:40 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 RM 2008-Aug-10 01:47:41 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 RM 2008-Aug-10 01:47:41 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 RM 2008-Aug-10 01:47:41 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Aug-10 01:47:41 START begin_task: Starting task 'WAPP calibration' 2008-Aug-10 01:47:41 LOG5 begin_task: Level: (3) ID = <10302> Status = 0 0 0 0 ok 2008-Aug-10 01:47:41 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Aug-10 01:47:41 START begin_task: Starting task 'selecting calibration type' 2008-Aug-10 01:47:41 LOG5 begin_task: Level: (4) ID = <10303> Status = 0 0 0 0 ok 2008-Aug-10 01:47:41 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Aug-10 01:47:41 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Aug-10 01:47:41 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 01:47:41 START begin_task: Starting task 'waiting on setcal' 2008-Aug-10 01:47:41 LOG5 begin_task: Level: (5) ID = <10304> Status = 0 0 0 0 ok 2008-Aug-10 01:47:41 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 RM' 2008-Aug-10 01:47:41 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Aug-10 01:47:41 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 01:47:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 01:47:41 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-10 01:47:41 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Aug-10 01:47:41 LOG5 end_task: Level: (5) ID = <10304> Status = 0 0 0 0 ok 2008-Aug-10 01:47:41 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Aug-10 01:47:41 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-10 01:47:41 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Aug-10 01:47:41 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-10 01:47:41 LOG5 begin_task: Level: (5) ID = <10305> Status = 0 0 0 0 ok 2008-Aug-10 01:47:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 01:47:41 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-10 01:47:41 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-10 01:47:41 LOG5 end_task: Level: (5) ID = <10305> Status = 0 0 0 0 ok 2008-Aug-10 01:47:41 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-10 01:47:41 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Aug-10 01:47:41 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-10 01:47:41 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Aug-10 01:47:41 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-10 01:47:41 LOG5 begin_task: Level: (5) ID = <10306> Status = 0 0 0 0 ok 2008-Aug-10 01:47:41 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-10 01:47:41 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-10 01:47:41 LOG5 end_task: Level: (5) ID = <10306> Status = 0 0 0 0 ok 2008-Aug-10 01:47:41 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-10 01:47:41 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Aug-10 01:47:41 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Aug-10 01:47:41 LOG5 end_task: Level: (4) ID = <10303> Status = 0 0 0 0 ok 2008-Aug-10 01:47:41 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Aug-10 01:47:41 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Aug-10 01:47:41 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Aug-10 01:47:41 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-10 01:47:41 LOG5 begin_task: Level: (4) ID = <10307> Status = 0 0 0 0 ok 2008-Aug-10 01:47:41 NOTE WAPPDATA-new_file: New FITS file: wapp.20080810.a2048.0005.fits 2008-Aug-10 01:47:41 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080810.a2048.0005.fits} 2008-Aug-10 01:47:41 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-10 01:47:41 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Aug-10 01:47:41 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-10 01:47:41 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-10 01:47:41 LOG5 end_task: Level: (4) ID = <10307> Status = 0 0 0 0 ok 2008-Aug-10 01:47:41 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Aug-10 01:47:41 LOG4 take_data: Calling 'take_data 5 5 CAL ON -' 2008-Aug-10 01:47:41 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-10 01:47:41 LOG5 begin_task: Level: (4) ID = <10308> Status = 0 0 0 0 ok 2008-Aug-10 01:47:41 LOG5 log_alfabeam: Parameters: 22.822194444444442 15.710138888888888 22.616472 2008.6107454622659 64.299980 2008-Aug-10 01:47:41 LOG4 log_alfabeam: ALFABEAM 0 22.822194444444428 15.710138888888881 2008-Aug-10 01:47:41 LOG4 log_alfabeam: ALFABEAM 1 22.819845987807778 15.806109539624490 2008-Aug-10 01:47:41 LOG4 log_alfabeam: ALFABEAM 2 22.815397034712372 15.743897465011994 2008-Aug-10 01:47:41 LOG4 log_alfabeam: ALFABEAM 3 22.817600144633495 15.647268438800619 2008-Aug-10 01:47:41 LOG4 log_alfabeam: ALFABEAM 4 22.824403626945898 15.612885736048641 2008-Aug-10 01:47:41 LOG4 log_alfabeam: ALFABEAM 5 22.829055193094721 15.678023968239161 2008-Aug-10 01:47:41 LOG4 log_alfabeam: ALFABEAM 6 22.826699684381026 15.774617325736360 2008-Aug-10 01:47:41 INFO2 take_data: Starting WAPP scan: 822300059 2008-Aug-10 01:47:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Aug-10 01:47:42 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-10 01:47:42 LOG5 begin_task: Level: (5) ID = <10309> Status = 0 0 0 0 ok 2008-Aug-10 01:47:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-10 01:47:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20863.00 2008-Aug-10 01:47:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.310006 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-10 01:47:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.310006 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 01:47:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.310006 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 01:47:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.310006 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 01:47:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.310006 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 01:47:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.310006 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 01:47:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.310006 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 01:47:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.310006 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 01:47:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.310006 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 01:47:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-10 01:47:48 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-10 01:47:48 LOG5 end_task: Level: (5) ID = <10309> Status = 0 0 0 0 ok 2008-Aug-10 01:47:48 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-10 01:47:48 LOG5 end_task: Level: (4) ID = <10308> Status = 0 0 0 0 ok 2008-Aug-10 01:47:48 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Aug-10 01:47:48 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Aug-10 01:47:48 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Aug-10 01:47:48 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-10 01:47:48 LOG5 begin_task: Level: (4) ID = <10310> Status = 0 0 0 0 ok 2008-Aug-10 01:47:49 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-10 01:47:49 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-10 01:47:49 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-10 01:47:49 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-10 01:47:49 LOG5 end_task: Level: (4) ID = <10310> Status = 0 0 0 0 ok 2008-Aug-10 01:47:49 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Aug-10 01:47:49 LOG4 take_data: Calling 'take_data 5 5 CAL OFF -' 2008-Aug-10 01:47:49 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-10 01:47:49 LOG5 begin_task: Level: (4) ID = <10311> Status = 0 0 0 0 ok 2008-Aug-10 01:47:49 LOG5 log_alfabeam: Parameters: 22.822194444444442 15.710138888888888 22.618422 2008.6107456840823 64.299980 2008-Aug-10 01:47:49 LOG4 log_alfabeam: ALFABEAM 0 22.822194444444435 15.710138888888887 2008-Aug-10 01:47:49 LOG4 log_alfabeam: ALFABEAM 1 22.819875397091955 15.806256848395494 2008-Aug-10 01:47:49 LOG4 log_alfabeam: ALFABEAM 2 22.815407736907787 15.744340764326079 2008-Aug-10 01:47:49 LOG4 log_alfabeam: ALFABEAM 3 22.817580473112141 15.647570305968665 2008-Aug-10 01:47:49 LOG4 log_alfabeam: ALFABEAM 4 22.824373113195477 15.612740655231697 2008-Aug-10 01:47:49 LOG4 log_alfabeam: ALFABEAM 5 22.829045341444864 15.677585582606097 2008-Aug-10 01:47:49 LOG4 log_alfabeam: ALFABEAM 6 22.826719371991889 15.774329938991887 2008-Aug-10 01:47:49 INFO2 take_data: Starting WAPP scan: 822300060 2008-Aug-10 01:47:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Aug-10 01:47:49 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-10 01:47:49 LOG5 begin_task: Level: (5) ID = <10312> Status = 0 0 0 0 ok 2008-Aug-10 01:47:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-10 01:47:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20870.00 2008-Aug-10 01:47:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.310006 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-10 01:47:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.310006 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 01:47:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.310006 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 01:47:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.310006 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 01:47:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.310006 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 01:47:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.310006 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 01:47:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.310006 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 01:47:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.310006 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 01:47:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.310006 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 01:47:55 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Aug-10 01:47:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-10 01:47:55 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-10 01:47:55 LOG5 end_task: Level: (5) ID = <10312> Status = 0 0 0 0 ok 2008-Aug-10 01:47:55 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-10 01:47:55 LOG5 end_task: Level: (4) ID = <10311> Status = 0 0 0 0 ok 2008-Aug-10 01:47:55 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Aug-10 01:47:55 STOP finish_task: Finishing task 'WAPP calibration' 2008-Aug-10 01:47:55 LOG5 finish_task: Level: (3) ID = <10302> Status = 0 0 0 0 ok 2008-Aug-10 01:47:55 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Aug-10 01:47:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 01:47:55 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Aug-10 01:47:55 LOG5 end_task: Level: (3) ID = <10302> Status = 0 0 0 0 ok 2008-Aug-10 01:47:56 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Aug-10 01:47:56 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 309.41 and ZA = 4.05 2008-Aug-10 01:47:56 LOG3 track_source: Calling 'track_source AGES7448_p3_092 309.41 4.0501523211 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Aug-10 01:47:56 START begin_task: Starting task 'sending tracking commands' 2008-Aug-10 01:47:56 LOG5 begin_task: Level: (3) ID = <10313> Status = 0 0 0 0 ok 2008-Aug-10 01:47:56 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7448_p3_092} INFO {Slewing to source 'AGES7448_p3_092' ...} 2008-Aug-10 01:47:56 INFO1 track_source: Starting to track AGES7448_p3_092 2008-Aug-10 01:47:56 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7448_p3_092" 2008-Aug-10 01:47:56 LOG3 vw_send: To DATATAKING: set ra 309.41 2008-Aug-10 01:47:56 LOG3 vw_send: To DATATAKING: set dec 4.0501523211 2008-Aug-10 01:47:56 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Aug-10 01:47:56 LOG3 vw_send: To DATATAKING: pnt tr 309.41 4.0501523211 -CF 2008-Aug-10 01:47:56 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Aug-10 01:47:56 STOP finish_task: Finishing task 'sending tracking commands' 2008-Aug-10 01:47:56 LOG5 finish_task: Level: (3) ID = <10313> Status = 0 0 0 0 ok 2008-Aug-10 01:47:56 INFO2 finish_task: DONE finished sending: tracking commands 2008-Aug-10 01:47:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 01:47:56 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Aug-10 01:47:56 LOG5 end_task: Level: (3) ID = <10313> Status = 0 0 0 0 ok 2008-Aug-10 01:47:56 LOG1 fixed_driftmap: Parameters: HA = -00:13:00.1 Start = 22:37:27.2 LST = 22:37:13.3 diff = 13.9 secs 2008-Aug-10 01:47:56 INFO2 fixed_driftmap: Waiting 11.9 seconds for RA 22:50:27 2008-Aug-10 01:47:56 INFO2 lstwait: Waiting for 11.8 secs from LST 22:37:13 to LST 22:37:25 ... 2008-Aug-10 01:47:56 LOG4 send_obs_status: To obs_status: <1> TASKTIME 11.839045686921294 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Aug-10 01:47:56 START begin_task: Starting task 'waiting on wait on LST' 2008-Aug-10 01:47:56 LOG5 begin_task: Level: (3) ID = <10314> Status = 0 0 0 0 ok 2008-Aug-10 01:47:56 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7448_p3_092" 2008-Aug-10 01:47:56 LOG4 got_cormsg: From DATATAKING: set ra 309.41 2008-Aug-10 01:47:56 LOG4 got_cormsg: From DATATAKING: set dec 4.0501523211 2008-Aug-10 01:47:56 LOG4 got_cormsg: From DATATAKING: vw% 309.41 2008-Aug-10 01:47:56 LOG4 got_cormsg: From DATATAKING: vw% 4.0501523211 2008-Aug-10 01:47:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 01:47:56 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Aug-10 01:47:56 LOG4 got_cormsg: From DATATAKING: pnt tr 309.41 4.0501523211 -CF 2008-Aug-10 01:47:56 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Aug-10 01:47:56 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Aug-10 01:47:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 01:48:08 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Aug-10 01:48:08 LOG5 end_task: Level: (3) ID = <10314> Status = 0 0 0 0 ok 2008-Aug-10 01:48:08 LOG4 lstwait: Finished waiting 0.16 seconds late 2008-Aug-10 01:48:08 INFO3 lstwait: Finished waiting 2008-Aug-10 01:48:08 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Aug-10 01:48:08 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Aug-10 01:48:08 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Aug-10 01:48:08 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Aug-10 01:48:08 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Aug-10 01:48:08 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ -' 2008-Aug-10 01:48:08 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-10 01:48:08 LOG5 begin_task: Level: (3) ID = <10315> Status = 0 0 0 0 ok 2008-Aug-10 01:48:08 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-10 01:48:08 INFO2 take_data: Starting WAPP scan: 822300061 2008-Aug-10 01:48:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Aug-10 01:48:08 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-10 01:48:08 LOG5 begin_task: Level: (4) ID = <10316> Status = 0 0 0 0 ok 2008-Aug-10 01:48:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-10 01:48:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20889.00 2008-Aug-10 01:48:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.310006 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-10 01:48:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.310006 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 01:48:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.310006 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 01:48:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.310006 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 01:48:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.310006 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 01:48:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.310006 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 01:48:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.310006 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 01:48:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.310006 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 01:48:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.310006 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 02:08:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-10 02:08:09 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-10 02:08:09 LOG5 end_task: Level: (4) ID = <10316> Status = 0 0 0 0 ok 2008-Aug-10 02:08:09 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-10 02:08:09 LOG5 end_task: Level: (3) ID = <10315> Status = 0 0 0 0 ok 2008-Aug-10 02:08:09 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Aug-10 02:08:09 LOG5 finish_task: Level: (2) ID = <10283> Status = 0 0 0 0 ok 2008-Aug-10 02:08:09 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Aug-10 02:08:09 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Aug-10 02:08:09 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Aug-10 02:08:09 LOG5 end_task: Level: (2) ID = <10283> Status = 0 0 0 0 ok 2008-Aug-10 02:08:09 COMMAND run_command_line: EXECUTING command 26: 'ENDIF' 2008-Aug-10 02:08:09 COMMAND run_command_line: EXECUTING command 29: 'IF LSTSLEW(AGES7448_p3_094) < 230326 THEN' 2008-Aug-10 02:08:10 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES7448_p3_094) < 230326 2008-Aug-10 02:08:10 INFO5 is_if_valid: Condition parsed as: 23.016850333333334 < 23.057222222222222 2008-Aug-10 02:08:10 COMMAND run_command_line: EXECUTING command 30: 'FIXEDDRIFT az=50.03 alfaangle=-25.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p3_094 ra=225000.00 dec=153930.00' 2008-Aug-10 02:08:10 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Aug-10 02:08:10 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Aug-10 02:08:10 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 50.03 -25.6 hcorcal 5 tracking no first 1 AGES7448_p3_094 225000.00 153930.00 J 8500.0 Heliocentric velocity(optical)' 2008-Aug-10 02:08:10 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Aug-10 02:08:10 LOG5 begin_task: Level: (2) ID = <10317> Status = 0 0 0 0 ok 2008-Aug-10 02:08:10 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES7448_p3_092' 2008-Aug-10 02:08:10 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Aug-10 02:08:10 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES7448_p3_094} 2008-Aug-10 02:08:10 INFO3 fixed_driftmap: Sending telescope to Az = 50.03 and ZA = 4.08 2008-Aug-10 02:08:10 LOG3 track_source: Calling 'track_source AGES7448_p3_094 50.03 4.0806619034 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Aug-10 02:08:10 START begin_task: Starting task 'sending tracking commands' 2008-Aug-10 02:08:10 LOG5 begin_task: Level: (3) ID = <10318> Status = 0 0 0 0 ok 2008-Aug-10 02:08:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7448_p3_094} INFO {Slewing to source 'AGES7448_p3_094' ...} 2008-Aug-10 02:08:10 INFO1 track_source: Starting to track AGES7448_p3_094 2008-Aug-10 02:08:10 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7448_p3_094" 2008-Aug-10 02:08:10 LOG3 vw_send: To DATATAKING: set ra 50.03 2008-Aug-10 02:08:10 LOG3 vw_send: To DATATAKING: set dec 4.0806619034 2008-Aug-10 02:08:10 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Aug-10 02:08:11 LOG3 vw_send: To DATATAKING: pnt tr 50.03 4.0806619034 -CF 2008-Aug-10 02:08:11 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Aug-10 02:08:11 STOP finish_task: Finishing task 'sending tracking commands' 2008-Aug-10 02:08:11 LOG5 finish_task: Level: (3) ID = <10318> Status = 0 0 0 0 ok 2008-Aug-10 02:08:11 INFO2 finish_task: DONE finished sending: tracking commands 2008-Aug-10 02:08:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 02:08:11 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Aug-10 02:08:11 LOG5 end_task: Level: (3) ID = <10318> Status = 0 0 0 0 ok 2008-Aug-10 02:08:11 START begin_task: Starting task 'rotate ALFA to -25.6 degrees' 2008-Aug-10 02:08:11 LOG5 begin_task: Level: (3) ID = <10319> Status = 0 0 0 0 ok 2008-Aug-10 02:08:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -25.6 degrees ...} 2008-Aug-10 02:08:11 INFO2 rotate_alfa: ALFA commanded to -25.6 degrees 2008-Aug-10 02:08:11 LOG3 sock_errsend: To ALFAMOTOR: POSITION -25.6 REPLY 2008-Aug-10 02:08:11 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Aug-10 02:08:11 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Aug-10 02:08:11 LOG5 begin_task: Level: (4) ID = <10320> Status = 0 0 0 0 ok 2008-Aug-10 02:08:11 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7448_p3_094" 2008-Aug-10 02:08:11 LOG4 got_cormsg: From DATATAKING: set ra 50.03 2008-Aug-10 02:08:11 LOG4 got_cormsg: From DATATAKING: set dec 4.0806619034 2008-Aug-10 02:08:11 LOG4 got_cormsg: From DATATAKING: vw% 50.03 2008-Aug-10 02:08:11 LOG4 got_cormsg: From DATATAKING: vw% 4.0806619034 2008-Aug-10 02:08:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 02:08:11 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Aug-10 02:08:11 LOG4 got_cormsg: From DATATAKING: pnt tr 50.03 4.0806619034 -CF 2008-Aug-10 02:08:11 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Aug-10 02:08:11 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Aug-10 02:08:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 02:09:01 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Aug-10 02:09:01 INFO3 alfa_motor: ALFA rotator in-position -25.60 degrees 2008-Aug-10 02:09:01 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Aug-10 02:09:01 LOG5 end_task: Level: (4) ID = <10320> Status = 0 0 0 0 ok 2008-Aug-10 02:09:01 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Aug-10 02:09:01 STOP finish_task: Finishing task 'rotate ALFA to -25.6 degrees' 2008-Aug-10 02:09:01 LOG5 finish_task: Level: (3) ID = <10319> Status = 0 0 0 0 ok 2008-Aug-10 02:09:01 INFO2 finish_task: DONE finished configuration: rotating ALFA to -25.6 degrees 2008-Aug-10 02:09:01 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 02:09:01 STOP end_task: Finishing task 'rotate ALFA to -25.6 degrees' with status 'OK' 2008-Aug-10 02:09:01 LOG5 end_task: Level: (3) ID = <10319> Status = 0 0 0 0 ok 2008-Aug-10 02:09:01 START begin_task: Starting task 'waiting on telescope' 2008-Aug-10 02:09:01 LOG5 begin_task: Level: (3) ID = <10321> Status = 0 0 0 0 ok 2008-Aug-10 02:09:01 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Aug-10 02:09:01 LOG3 waittrk: Start waittrk 5 2008-Aug-10 02:09:01 START begin_task: Starting task 'waiting on telescope movement' 2008-Aug-10 02:09:01 LOG5 begin_task: Level: (4) ID = <10322> Status = 0 0 0 0 ok 2008-Aug-10 02:09:06 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Aug-10 02:09:06 LOG5 end_task: Level: (4) ID = <10322> Status = 0 0 0 0 ok 2008-Aug-10 02:09:06 START begin_task: Starting task 'waiting on telescope on source' 2008-Aug-10 02:09:06 LOG5 begin_task: Level: (4) ID = <10323> Status = 0 0 0 0 ok 2008-Aug-10 02:12:26 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Aug-10 02:12:26 LOG5 end_task: Level: (4) ID = <10323> Status = 0 0 0 0 ok 2008-Aug-10 02:12:26 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Aug-10 02:12:26 INFO2 waittrk: Now tracking AGES7448_p3_094 2008-Aug-10 02:12:26 LOG4 waittrk: Current telescope position: Az = 409.94 ZA = 4.05 2008-Aug-10 02:12:26 STOP finish_task: Finishing task 'waiting on telescope' 2008-Aug-10 02:12:26 LOG5 finish_task: Level: (3) ID = <10321> Status = 0 0 0 0 ok 2008-Aug-10 02:12:26 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Aug-10 02:12:26 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 02:12:27 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Aug-10 02:12:27 LOG5 end_task: Level: (3) ID = <10321> Status = 0 0 0 0 ok 2008-Aug-10 02:12:27 START begin_task: Starting task 'selecting calibration type' 2008-Aug-10 02:12:27 LOG5 begin_task: Level: (3) ID = <10324> Status = 0 0 0 0 ok 2008-Aug-10 02:12:27 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Aug-10 02:12:27 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Aug-10 02:12:27 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 02:12:27 START begin_task: Starting task 'waiting on setcal' 2008-Aug-10 02:12:27 LOG5 begin_task: Level: (4) ID = <10325> Status = 0 0 0 0 ok 2008-Aug-10 02:12:27 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Aug-10 02:12:27 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 02:12:28 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 02:12:28 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-10 02:12:28 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Aug-10 02:12:28 LOG5 end_task: Level: (4) ID = <10325> Status = 0 0 0 0 ok 2008-Aug-10 02:12:28 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Aug-10 02:12:28 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-10 02:12:28 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Aug-10 02:12:28 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-10 02:12:28 LOG5 begin_task: Level: (4) ID = <10326> Status = 0 0 0 0 ok 2008-Aug-10 02:12:28 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 02:12:28 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-10 02:12:28 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-10 02:12:28 LOG5 end_task: Level: (4) ID = <10326> Status = 0 0 0 0 ok 2008-Aug-10 02:12:28 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-10 02:12:28 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Aug-10 02:12:28 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-10 02:12:28 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Aug-10 02:12:28 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-10 02:12:28 LOG5 begin_task: Level: (4) ID = <10327> Status = 0 0 0 0 ok 2008-Aug-10 02:12:28 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-10 02:12:28 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-10 02:12:28 LOG5 end_task: Level: (4) ID = <10327> Status = 0 0 0 0 ok 2008-Aug-10 02:12:28 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-10 02:12:28 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Aug-10 02:12:28 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Aug-10 02:12:28 LOG5 end_task: Level: (3) ID = <10324> Status = 0 0 0 0 ok 2008-Aug-10 02:12:28 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2008-Aug-10 02:12:28 INFO2 astwait: Waiting for 36 seconds from 06:12:28 to 06:13:04 UTC ... 2008-Aug-10 02:12:28 LOG4 send_obs_status: To obs_status: <1> TASKTIME 36 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Aug-10 02:12:28 START begin_task: Starting task 'waiting on waiting for AST time' 2008-Aug-10 02:12:28 LOG5 begin_task: Level: (3) ID = <10328> Status = 0 0 0 0 ok 2008-Aug-10 02:13:04 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2008-Aug-10 02:13:04 LOG5 end_task: Level: (3) ID = <10328> Status = 0 0 0 0 ok 2008-Aug-10 02:13:04 INFO3 astwait: Finished waiting 2008-Aug-10 02:13:04 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Aug-10 02:13:04 LOG5 dopset_later: Calling 'dopset_later 61.113549829494261' 2008-Aug-10 02:13:04 INFO3 dopset_later: Setting Doppler correction for 02:14:04 (61.1 seconds from now) 2008-Aug-10 02:13:04 LOG5 antvel: Calling 'antvel 50.030000 4.080662 F 61.113549829494261' 2008-Aug-10 02:13:04 LOG2 antvel: Transforming current Az = 50.03 ZA = 4.08 to apparent RA = 22:50:27.2 Dec = +15:42:21.0 2008-Aug-10 02:13:04 LOG2 antvel: Parameters to Doppler: Heliocentric 22444 2008 223 0.0 2008-Aug-10 02:13:04 INFO5 antvel: Computed antenna velocity: -14.38993 km/s 2008-Aug-10 02:13:04 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-14.3899300016 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Aug-10 02:13:04 INFO4 dopset_gen: New sky frequencies: 1381.309731 1381.309731 1381.309731 1381.309731 1381.309731 1381.309731 1381.309731 1381.309731 1381.309731 2008-Aug-10 02:13:04 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.309731 sky0=1381.309731 sky1=1381.309731 sky2=1381.309731 sky3=1381.309731 sky4=1381.309731 sky5=1381.309731 sky6=1381.309731 sky7=1381.309731 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-10 02:13:04 LOG2 dopset_gen: Result from 'sky2syn': 1631.309731 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-10 02:13:04 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631309731.0} 2008-Aug-10 02:13:04 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 02:13:04 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Aug-10 02:13:04 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Aug-10 02:13:04 INFO5 fixed_driftmap: Tracking J2000 position: RA = 22:49:03.5 Dec = +15:39:36.5 2008-Aug-10 02:13:04 LOG3 track_source: Calling 'track_source AGES7448_p3_094 224903.5 153936.5 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Aug-10 02:13:04 START begin_task: Starting task 'sending tracking commands' 2008-Aug-10 02:13:04 LOG5 begin_task: Level: (3) ID = <10329> Status = 0 0 0 0 ok 2008-Aug-10 02:13:04 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7448_p3_094} INFO {Slewing to source 'AGES7448_p3_094' ...} 2008-Aug-10 02:13:04 INFO1 track_source: Starting to track AGES7448_p3_094 2008-Aug-10 02:13:04 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7448_p3_094" 2008-Aug-10 02:13:04 LOG3 vw_send: To DATATAKING: set ra 224903.5 2008-Aug-10 02:13:04 LOG3 vw_send: To DATATAKING: set dec 153936.5 2008-Aug-10 02:13:04 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Aug-10 02:13:04 LOG3 vw_send: To DATATAKING: pnt tr 224903.5 153936.5 -CJ 2008-Aug-10 02:13:04 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Aug-10 02:13:04 STOP finish_task: Finishing task 'sending tracking commands' 2008-Aug-10 02:13:04 LOG5 finish_task: Level: (3) ID = <10329> Status = 0 0 0 0 ok 2008-Aug-10 02:13:04 INFO2 finish_task: DONE finished sending: tracking commands 2008-Aug-10 02:13:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 02:13:04 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Aug-10 02:13:04 LOG5 end_task: Level: (3) ID = <10329> Status = 0 0 0 0 ok 2008-Aug-10 02:13:04 START begin_task: Starting task 'waiting on telescope' 2008-Aug-10 02:13:04 LOG5 begin_task: Level: (3) ID = <10330> Status = 0 0 0 0 ok 2008-Aug-10 02:13:04 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Aug-10 02:13:04 LOG3 waittrk: Start waittrk 5 2008-Aug-10 02:13:04 START begin_task: Starting task 'waiting on telescope movement' 2008-Aug-10 02:13:04 LOG5 begin_task: Level: (4) ID = <10331> Status = 0 0 0 0 ok 2008-Aug-10 02:13:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631309731.0} 2008-Aug-10 02:13:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 02:13:04 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 02:13:04 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7448_p3_094" 2008-Aug-10 02:13:04 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 02:13:04 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 02:13:04 LOG4 got_cormsg: From DATATAKING: set ra 224903.5 2008-Aug-10 02:13:04 LOG4 got_cormsg: From DATATAKING: set dec 153936.5 2008-Aug-10 02:13:04 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Aug-10 02:13:04 LOG4 got_cormsg: From DATATAKING: pnt tr 224903.5 153936.5 -CJ 2008-Aug-10 02:13:04 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Aug-10 02:13:04 LOG4 got_cormsg: From DATATAKING: 224903.5 2008-Aug-10 02:13:04 LOG4 got_cormsg: From DATATAKING: vw% 153936.5 2008-Aug-10 02:13:04 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2008-Aug-10 02:13:09 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Aug-10 02:13:09 LOG5 end_task: Level: (4) ID = <10331> Status = 0 0 0 0 ok 2008-Aug-10 02:13:09 START begin_task: Starting task 'waiting on telescope on source' 2008-Aug-10 02:13:09 LOG5 begin_task: Level: (4) ID = <10332> Status = 0 0 0 0 ok 2008-Aug-10 02:13:11 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Aug-10 02:13:11 LOG5 end_task: Level: (4) ID = <10332> Status = 0 0 0 0 ok 2008-Aug-10 02:13:11 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Aug-10 02:13:11 INFO2 waittrk: Now tracking AGES7448_p3_094 2008-Aug-10 02:13:11 LOG4 waittrk: Current telescope position: Az = 410.10 ZA = 4.07 2008-Aug-10 02:13:11 STOP finish_task: Finishing task 'waiting on telescope' 2008-Aug-10 02:13:11 LOG5 finish_task: Level: (3) ID = <10330> Status = 0 0 0 0 ok 2008-Aug-10 02:13:11 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Aug-10 02:13:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 02:13:11 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Aug-10 02:13:11 LOG5 end_task: Level: (3) ID = <10330> Status = 0 0 0 0 ok 2008-Aug-10 02:13:11 START begin_task: Starting task 'adjusting WAPP power' 2008-Aug-10 02:13:11 LOG5 begin_task: Level: (3) ID = <10333> Status = 0 0 0 0 ok 2008-Aug-10 02:13:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Aug-10 02:13:11 INFO2 adjust_power: Starting to adjust WAPP power 2008-Aug-10 02:13:11 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Aug-10 02:13:11 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Aug-10 02:13:11 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 02:13:11 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Aug-10 02:13:11 LOG5 begin_task: Level: (4) ID = <10334> Status = 0 0 0 0 ok 2008-Aug-10 02:13:12 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Aug-10 02:13:12 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 02:13:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 02:13:14 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-10 02:13:14 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Aug-10 02:13:14 LOG5 end_task: Level: (4) ID = <10334> Status = 0 0 0 0 ok 2008-Aug-10 02:13:14 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Aug-10 02:13:14 START begin_task: Starting task 'adjusting WAPP power' 2008-Aug-10 02:13:14 LOG5 begin_task: Level: (4) ID = <10335> Status = 0 0 0 0 ok 2008-Aug-10 02:13:14 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Aug-10 02:13:14 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Aug-10 02:13:14 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Aug-10 02:13:14 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Aug-10 02:13:15 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Aug-10 02:13:15 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Aug-10 02:13:15 LOG5 begin_task: Level: (5) ID = <10336> Status = 0 0 0 0 ok 2008-Aug-10 02:13:15 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Aug-10 02:13:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 02:13:15 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 6 dB 2008-Aug-10 02:13:15 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 2 dB --- beam 5: 5 5 dB 2008-Aug-10 02:13:15 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 5 3 dB --- beam 3: 3 2 dB 2008-Aug-10 02:13:15 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 2 dB --- beam 7: 2 2 dB 2008-Aug-10 02:13:15 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Aug-10 02:13:15 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Aug-10 02:13:15 LOG5 end_task: Level: (5) ID = <10336> Status = 0 0 0 0 ok 2008-Aug-10 02:13:15 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.965 0.974 ALFA beam 1: 0.948 0.901 2008-Aug-10 02:13:15 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.074 1.075 ALFA beam 3: 1.063 1.103 2008-Aug-10 02:13:15 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.060 1.041 ALFA beam 5: 1.034 0.906 2008-Aug-10 02:13:15 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.065 0.914 ALFA beam 7: 0.941 1.010 2008-Aug-10 02:13:15 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Aug-10 02:13:15 LOG5 finish_task: Level: (4) ID = <10335> Status = 0 0 0 0 ok 2008-Aug-10 02:13:15 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Aug-10 02:13:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 02:13:15 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Aug-10 02:13:15 LOG5 end_task: Level: (4) ID = <10335> Status = 0 0 0 0 ok 2008-Aug-10 02:13:15 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Aug-10 02:13:15 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Aug-10 02:13:15 LOG5 finish_task: Level: (3) ID = <10333> Status = 0 0 0 0 ok 2008-Aug-10 02:13:15 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Aug-10 02:13:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 02:13:15 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Aug-10 02:13:15 LOG5 end_task: Level: (3) ID = <10333> Status = 0 0 0 0 ok 2008-Aug-10 02:13:15 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 RM 2008-Aug-10 02:13:15 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 RM 2008-Aug-10 02:13:15 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 RM 2008-Aug-10 02:13:15 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 RM 2008-Aug-10 02:13:15 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Aug-10 02:13:15 START begin_task: Starting task 'WAPP calibration' 2008-Aug-10 02:13:15 LOG5 begin_task: Level: (3) ID = <10337> Status = 0 0 0 0 ok 2008-Aug-10 02:13:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Aug-10 02:13:15 START begin_task: Starting task 'selecting calibration type' 2008-Aug-10 02:13:15 LOG5 begin_task: Level: (4) ID = <10338> Status = 0 0 0 0 ok 2008-Aug-10 02:13:15 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Aug-10 02:13:15 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Aug-10 02:13:15 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 02:13:15 START begin_task: Starting task 'waiting on setcal' 2008-Aug-10 02:13:15 LOG5 begin_task: Level: (5) ID = <10339> Status = 0 0 0 0 ok 2008-Aug-10 02:13:15 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 RM' 2008-Aug-10 02:13:16 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Aug-10 02:13:16 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 02:13:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 02:13:16 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-10 02:13:16 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Aug-10 02:13:16 LOG5 end_task: Level: (5) ID = <10339> Status = 0 0 0 0 ok 2008-Aug-10 02:13:16 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Aug-10 02:13:16 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-10 02:13:16 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Aug-10 02:13:16 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-10 02:13:16 LOG5 begin_task: Level: (5) ID = <10340> Status = 0 0 0 0 ok 2008-Aug-10 02:13:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 02:13:16 NOTE WAPPDATA-new_file: New FITS file: wapp.20080810.a2048.0006.fits 2008-Aug-10 02:13:16 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080810.a2048.0006.fits} 2008-Aug-10 02:13:17 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-10 02:13:17 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-10 02:13:17 LOG5 end_task: Level: (5) ID = <10340> Status = 0 0 0 0 ok 2008-Aug-10 02:13:17 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-10 02:13:17 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Aug-10 02:13:17 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-10 02:13:17 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Aug-10 02:13:17 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-10 02:13:17 LOG5 begin_task: Level: (5) ID = <10341> Status = 0 0 0 0 ok 2008-Aug-10 02:13:17 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-10 02:13:17 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-10 02:13:17 LOG5 end_task: Level: (5) ID = <10341> Status = 0 0 0 0 ok 2008-Aug-10 02:13:17 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-10 02:13:17 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Aug-10 02:13:17 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Aug-10 02:13:17 LOG5 end_task: Level: (4) ID = <10338> Status = 0 0 0 0 ok 2008-Aug-10 02:13:17 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Aug-10 02:13:17 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Aug-10 02:13:17 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Aug-10 02:13:17 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-10 02:13:17 LOG5 begin_task: Level: (4) ID = <10342> Status = 0 0 0 0 ok 2008-Aug-10 02:13:17 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-10 02:13:17 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Aug-10 02:13:17 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-10 02:13:17 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-10 02:13:17 LOG5 end_task: Level: (4) ID = <10342> Status = 0 0 0 0 ok 2008-Aug-10 02:13:17 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Aug-10 02:13:17 LOG4 take_data: Calling 'take_data 5 5 CAL ON -' 2008-Aug-10 02:13:17 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-10 02:13:17 LOG5 begin_task: Level: (4) ID = <10343> Status = 0 0 0 0 ok 2008-Aug-10 02:13:17 LOG5 log_alfabeam: Parameters: 22.81763888888889 15.660138888888889 23.044307 2008.6107941351686 -25.600060 2008-Aug-10 02:13:17 LOG4 log_alfabeam: ALFABEAM 0 22.817638888888894 15.660138888888886 2008-Aug-10 02:13:17 LOG4 log_alfabeam: ALFABEAM 1 22.817504189382554 15.756226317435129 2008-Aug-10 02:13:17 LOG4 log_alfabeam: ALFABEAM 2 22.811506790520525 15.694084670625896 2008-Aug-10 02:13:17 LOG4 log_alfabeam: ALFABEAM 3 22.811719390137256 15.596502198009162 2008-Aug-10 02:13:17 LOG4 log_alfabeam: ALFABEAM 4 22.817945224051606 15.563271282157535 2008-Aug-10 02:13:17 LOG4 log_alfabeam: ALFABEAM 5 22.823772882366139 15.628627307386877 2008-Aug-10 02:13:17 LOG4 log_alfabeam: ALFABEAM 6 22.823546426862823 15.724022780097462 2008-Aug-10 02:13:17 INFO2 take_data: Starting WAPP scan: 822300062 2008-Aug-10 02:13:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Aug-10 02:13:18 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-10 02:13:18 LOG5 begin_task: Level: (5) ID = <10344> Status = 0 0 0 0 ok 2008-Aug-10 02:13:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-10 02:13:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22399.00 2008-Aug-10 02:13:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.309731 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-10 02:13:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.309731 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 02:13:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.309731 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 02:13:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.309731 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 02:13:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.309731 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 02:13:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.309731 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 02:13:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.309731 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 02:13:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.309731 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 02:13:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.309731 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 02:13:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-10 02:13:24 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-10 02:13:24 LOG5 end_task: Level: (5) ID = <10344> Status = 0 0 0 0 ok 2008-Aug-10 02:13:24 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-10 02:13:24 LOG5 end_task: Level: (4) ID = <10343> Status = 0 0 0 0 ok 2008-Aug-10 02:13:24 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Aug-10 02:13:24 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Aug-10 02:13:24 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Aug-10 02:13:24 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-10 02:13:24 LOG5 begin_task: Level: (4) ID = <10345> Status = 0 0 0 0 ok 2008-Aug-10 02:13:24 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-10 02:13:24 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-10 02:13:24 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-10 02:13:24 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-10 02:13:24 LOG5 end_task: Level: (4) ID = <10345> Status = 0 0 0 0 ok 2008-Aug-10 02:13:25 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Aug-10 02:13:25 LOG4 take_data: Calling 'take_data 5 5 CAL OFF -' 2008-Aug-10 02:13:25 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-10 02:13:25 LOG5 begin_task: Level: (4) ID = <10346> Status = 0 0 0 0 ok 2008-Aug-10 02:13:25 LOG5 log_alfabeam: Parameters: 22.81763888888889 15.660138888888889 23.046257 2008.6107943569853 -25.600060 2008-Aug-10 02:13:25 LOG4 log_alfabeam: ALFABEAM 0 22.817638888888908 15.660138888888888 2008-Aug-10 02:13:25 LOG4 log_alfabeam: ALFABEAM 1 22.817532227534169 15.756235919312326 2008-Aug-10 02:13:25 LOG4 log_alfabeam: ALFABEAM 2 22.811516879926618 15.694456879588426 2008-Aug-10 02:13:25 LOG4 log_alfabeam: ALFABEAM 3 22.811700632523234 15.596867870812472 2008-Aug-10 02:13:25 LOG4 log_alfabeam: ALFABEAM 4 22.817916087492549 15.563255192312814 2008-Aug-10 02:13:25 LOG4 log_alfabeam: ALFABEAM 5 22.823763481962605 15.628242098913882 2008-Aug-10 02:13:25 LOG4 log_alfabeam: ALFABEAM 6 22.823565339911642 15.723656367492861 2008-Aug-10 02:13:25 INFO2 take_data: Starting WAPP scan: 822300063 2008-Aug-10 02:13:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Aug-10 02:13:25 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-10 02:13:25 LOG5 begin_task: Level: (5) ID = <10347> Status = 0 0 0 0 ok 2008-Aug-10 02:13:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-10 02:13:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22406.00 2008-Aug-10 02:13:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.309731 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-10 02:13:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.309731 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 02:13:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.309731 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 02:13:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.309731 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 02:13:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.309731 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 02:13:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.309731 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 02:13:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.309731 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 02:13:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.309731 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 02:13:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.309731 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 02:13:31 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Aug-10 02:13:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-10 02:13:31 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-10 02:13:31 LOG5 end_task: Level: (5) ID = <10347> Status = 0 0 0 0 ok 2008-Aug-10 02:13:31 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-10 02:13:31 LOG5 end_task: Level: (4) ID = <10346> Status = 0 0 0 0 ok 2008-Aug-10 02:13:31 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Aug-10 02:13:31 STOP finish_task: Finishing task 'WAPP calibration' 2008-Aug-10 02:13:31 LOG5 finish_task: Level: (3) ID = <10337> Status = 0 0 0 0 ok 2008-Aug-10 02:13:31 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Aug-10 02:13:31 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 02:13:31 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Aug-10 02:13:31 LOG5 end_task: Level: (3) ID = <10337> Status = 0 0 0 0 ok 2008-Aug-10 02:13:31 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Aug-10 02:13:32 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 50.03 and ZA = 4.08 2008-Aug-10 02:13:32 LOG3 track_source: Calling 'track_source AGES7448_p3_094 50.03 4.0806619034 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Aug-10 02:13:32 START begin_task: Starting task 'sending tracking commands' 2008-Aug-10 02:13:32 LOG5 begin_task: Level: (3) ID = <10348> Status = 0 0 0 0 ok 2008-Aug-10 02:13:32 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7448_p3_094} INFO {Slewing to source 'AGES7448_p3_094' ...} 2008-Aug-10 02:13:32 INFO1 track_source: Starting to track AGES7448_p3_094 2008-Aug-10 02:13:32 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7448_p3_094" 2008-Aug-10 02:13:32 LOG3 vw_send: To DATATAKING: set ra 50.03 2008-Aug-10 02:13:32 LOG3 vw_send: To DATATAKING: set dec 4.0806619034 2008-Aug-10 02:13:32 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Aug-10 02:13:32 LOG3 vw_send: To DATATAKING: pnt tr 50.03 4.0806619034 -CF 2008-Aug-10 02:13:32 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Aug-10 02:13:32 STOP finish_task: Finishing task 'sending tracking commands' 2008-Aug-10 02:13:32 LOG5 finish_task: Level: (3) ID = <10348> Status = 0 0 0 0 ok 2008-Aug-10 02:13:32 INFO2 finish_task: DONE finished sending: tracking commands 2008-Aug-10 02:13:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 02:13:32 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Aug-10 02:13:32 LOG5 end_task: Level: (3) ID = <10348> Status = 0 0 0 0 ok 2008-Aug-10 02:13:32 LOG1 fixed_driftmap: Parameters: HA = +00:12:59.4 Start = 23:03:26.7 LST = 23:02:53.5 diff = 33.2 secs 2008-Aug-10 02:13:32 INFO2 fixed_driftmap: Waiting 31.2 seconds for RA 22:50:27 2008-Aug-10 02:13:32 INFO2 lstwait: Waiting for 31.1 secs from LST 23:02:54 to LST 23:03:25 ... 2008-Aug-10 02:13:32 LOG4 send_obs_status: To obs_status: <1> TASKTIME 31.119270432052755 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Aug-10 02:13:32 START begin_task: Starting task 'waiting on wait on LST' 2008-Aug-10 02:13:32 LOG5 begin_task: Level: (3) ID = <10349> Status = 0 0 0 0 ok 2008-Aug-10 02:13:32 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7448_p3_094" 2008-Aug-10 02:13:32 LOG4 got_cormsg: From DATATAKING: set ra 50.03 2008-Aug-10 02:13:32 LOG4 got_cormsg: From DATATAKING: set dec 4.0806619034 2008-Aug-10 02:13:32 LOG4 got_cormsg: From DATATAKING: vw% 50.03 2008-Aug-10 02:13:32 LOG4 got_cormsg: From DATATAKING: 2008-Aug-10 02:13:32 LOG4 got_cormsg: From DATATAKING: vw% 4.0806619034 2008-Aug-10 02:13:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 02:13:32 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Aug-10 02:13:32 LOG4 got_cormsg: From DATATAKING: pnt tr 50.03 4.0806619034 -CF 2008-Aug-10 02:13:32 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Aug-10 02:13:32 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Aug-10 02:13:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 02:14:03 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Aug-10 02:14:03 LOG5 end_task: Level: (3) ID = <10349> Status = 0 0 0 0 ok 2008-Aug-10 02:14:03 LOG4 lstwait: Finished waiting 0.88 seconds late 2008-Aug-10 02:14:03 INFO3 lstwait: Finished waiting 2008-Aug-10 02:14:03 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Aug-10 02:14:03 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Aug-10 02:14:03 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Aug-10 02:14:03 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Aug-10 02:14:03 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Aug-10 02:14:03 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ -' 2008-Aug-10 02:14:03 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-10 02:14:03 LOG5 begin_task: Level: (3) ID = <10350> Status = 0 0 0 0 ok 2008-Aug-10 02:14:03 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-10 02:14:03 INFO2 take_data: Starting WAPP scan: 822300064 2008-Aug-10 02:14:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Aug-10 02:14:04 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-10 02:14:04 LOG5 begin_task: Level: (4) ID = <10351> Status = 0 0 0 0 ok 2008-Aug-10 02:14:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-10 02:14:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22445.00 2008-Aug-10 02:14:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.309731 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-10 02:14:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.309731 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 02:14:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.309731 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 02:14:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.309731 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 02:14:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.309731 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 02:14:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.309731 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 02:14:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.309731 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 02:14:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.309731 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 02:14:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.309731 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 02:34:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-10 02:34:05 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-10 02:34:05 LOG5 end_task: Level: (4) ID = <10351> Status = 0 0 0 0 ok 2008-Aug-10 02:34:05 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-10 02:34:05 LOG5 end_task: Level: (3) ID = <10350> Status = 0 0 0 0 ok 2008-Aug-10 02:34:05 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Aug-10 02:34:05 LOG5 finish_task: Level: (2) ID = <10317> Status = 0 0 0 0 ok 2008-Aug-10 02:34:05 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Aug-10 02:34:05 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Aug-10 02:34:05 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Aug-10 02:34:05 LOG5 end_task: Level: (2) ID = <10317> Status = 0 0 0 0 ok 2008-Aug-10 02:34:05 COMMAND run_command_line: EXECUTING command 33: 'ENDIF' 2008-Aug-10 02:34:05 COMMAND run_command_line: EXECUTING command 36: 'IF LSTSLEW(AGES7448_p3_095) < 232626 THEN' 2008-Aug-10 02:34:06 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES7448_p3_095) < 232626 2008-Aug-10 02:34:06 INFO5 is_if_valid: Condition parsed as: 23.421923 < 23.440555555555555 2008-Aug-10 02:34:06 COMMAND run_command_line: EXECUTING command 37: 'FIXEDDRIFT az=74.09 alfaangle=-49.5 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p3_095 ra=225000.00 dec=153800.00' 2008-Aug-10 02:34:06 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Aug-10 02:34:06 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Aug-10 02:34:06 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 74.09 -49.5 hcorcal 5 tracking no first 1 AGES7448_p3_095 225000.00 153800.00 J 8500.0 Heliocentric velocity(optical)' 2008-Aug-10 02:34:06 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Aug-10 02:34:06 LOG5 begin_task: Level: (2) ID = <10352> Status = 0 0 0 0 ok 2008-Aug-10 02:34:06 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES7448_p3_094' 2008-Aug-10 02:34:06 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Aug-10 02:34:06 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES7448_p3_095} 2008-Aug-10 02:34:06 INFO3 fixed_driftmap: Sending telescope to Az = 74.09 and ZA = 9.01 2008-Aug-10 02:34:07 LOG3 track_source: Calling 'track_source AGES7448_p3_095 74.09 9.0051283034 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Aug-10 02:34:07 START begin_task: Starting task 'sending tracking commands' 2008-Aug-10 02:34:07 LOG5 begin_task: Level: (3) ID = <10353> Status = 0 0 0 0 ok 2008-Aug-10 02:34:07 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7448_p3_095} INFO {Slewing to source 'AGES7448_p3_095' ...} 2008-Aug-10 02:34:07 INFO1 track_source: Starting to track AGES7448_p3_095 2008-Aug-10 02:34:07 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7448_p3_095" 2008-Aug-10 02:34:07 LOG3 vw_send: To DATATAKING: set ra 74.09 2008-Aug-10 02:34:07 LOG3 vw_send: To DATATAKING: set dec 9.0051283034 2008-Aug-10 02:34:07 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Aug-10 02:34:07 LOG3 vw_send: To DATATAKING: pnt tr 74.09 9.0051283034 -CF 2008-Aug-10 02:34:07 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Aug-10 02:34:07 STOP finish_task: Finishing task 'sending tracking commands' 2008-Aug-10 02:34:07 LOG5 finish_task: Level: (3) ID = <10353> Status = 0 0 0 0 ok 2008-Aug-10 02:34:07 INFO2 finish_task: DONE finished sending: tracking commands 2008-Aug-10 02:34:07 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 02:34:07 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Aug-10 02:34:07 LOG5 end_task: Level: (3) ID = <10353> Status = 0 0 0 0 ok 2008-Aug-10 02:34:07 START begin_task: Starting task 'rotate ALFA to -49.5 degrees' 2008-Aug-10 02:34:07 LOG5 begin_task: Level: (3) ID = <10354> Status = 0 0 0 0 ok 2008-Aug-10 02:34:07 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -49.5 degrees ...} 2008-Aug-10 02:34:07 INFO2 rotate_alfa: ALFA commanded to -49.5 degrees 2008-Aug-10 02:34:07 LOG3 sock_errsend: To ALFAMOTOR: POSITION -49.5 REPLY 2008-Aug-10 02:34:07 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Aug-10 02:34:07 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Aug-10 02:34:07 LOG5 begin_task: Level: (4) ID = <10355> Status = 0 0 0 0 ok 2008-Aug-10 02:34:07 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7448_p3_095" 2008-Aug-10 02:34:07 LOG4 got_cormsg: From DATATAKING: set ra 74.09 2008-Aug-10 02:34:07 LOG4 got_cormsg: From DATATAKING: set dec 9.0051283034 2008-Aug-10 02:34:07 LOG4 got_cormsg: From DATATAKING: vw% 74.09 2008-Aug-10 02:34:07 LOG4 got_cormsg: From DATATAKING: vw% 9.0051283034 2008-Aug-10 02:34:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 02:34:07 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Aug-10 02:34:07 LOG4 got_cormsg: From DATATAKING: pnt tr 74.09 9.0051283034 -CF 2008-Aug-10 02:34:07 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Aug-10 02:34:07 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2008-Aug-10 02:34:21 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Aug-10 02:34:21 INFO3 alfa_motor: ALFA rotator in-position -49.50 degrees 2008-Aug-10 02:34:21 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Aug-10 02:34:21 LOG5 end_task: Level: (4) ID = <10355> Status = 0 0 0 0 ok 2008-Aug-10 02:34:21 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Aug-10 02:34:22 STOP finish_task: Finishing task 'rotate ALFA to -49.5 degrees' 2008-Aug-10 02:34:22 LOG5 finish_task: Level: (3) ID = <10354> Status = 0 0 0 0 ok 2008-Aug-10 02:34:22 INFO2 finish_task: DONE finished configuration: rotating ALFA to -49.5 degrees 2008-Aug-10 02:34:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 02:34:22 STOP end_task: Finishing task 'rotate ALFA to -49.5 degrees' with status 'OK' 2008-Aug-10 02:34:22 LOG5 end_task: Level: (3) ID = <10354> Status = 0 0 0 0 ok 2008-Aug-10 02:34:22 START begin_task: Starting task 'waiting on telescope' 2008-Aug-10 02:34:22 LOG5 begin_task: Level: (3) ID = <10356> Status = 0 0 0 0 ok 2008-Aug-10 02:34:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Aug-10 02:34:22 LOG3 waittrk: Start waittrk 5 2008-Aug-10 02:34:22 START begin_task: Starting task 'waiting on telescope movement' 2008-Aug-10 02:34:22 LOG5 begin_task: Level: (4) ID = <10357> Status = 0 0 0 0 ok 2008-Aug-10 02:34:27 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Aug-10 02:34:27 LOG5 end_task: Level: (4) ID = <10357> Status = 0 0 0 0 ok 2008-Aug-10 02:34:27 START begin_task: Starting task 'waiting on telescope on source' 2008-Aug-10 02:34:27 LOG5 begin_task: Level: (4) ID = <10358> Status = 0 0 0 0 ok 2008-Aug-10 02:36:16 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Aug-10 02:36:16 LOG5 end_task: Level: (4) ID = <10358> Status = 0 0 0 0 ok 2008-Aug-10 02:36:16 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Aug-10 02:36:16 INFO2 waittrk: Now tracking AGES7448_p3_095 2008-Aug-10 02:36:16 LOG4 waittrk: Current telescope position: Az = 433.98 ZA = 8.99 2008-Aug-10 02:36:16 STOP finish_task: Finishing task 'waiting on telescope' 2008-Aug-10 02:36:16 LOG5 finish_task: Level: (3) ID = <10356> Status = 0 0 0 0 ok 2008-Aug-10 02:36:16 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Aug-10 02:36:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 02:36:16 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Aug-10 02:36:16 LOG5 end_task: Level: (3) ID = <10356> Status = 0 0 0 0 ok 2008-Aug-10 02:36:16 START begin_task: Starting task 'selecting calibration type' 2008-Aug-10 02:36:16 LOG5 begin_task: Level: (3) ID = <10359> Status = 0 0 0 0 ok 2008-Aug-10 02:36:16 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Aug-10 02:36:16 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Aug-10 02:36:16 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 02:36:16 START begin_task: Starting task 'waiting on setcal' 2008-Aug-10 02:36:16 LOG5 begin_task: Level: (4) ID = <10360> Status = 0 0 0 0 ok 2008-Aug-10 02:36:16 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Aug-10 02:36:16 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 02:36:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 02:36:17 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-10 02:36:17 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Aug-10 02:36:17 LOG5 end_task: Level: (4) ID = <10360> Status = 0 0 0 0 ok 2008-Aug-10 02:36:17 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Aug-10 02:36:17 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-10 02:36:17 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Aug-10 02:36:17 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-10 02:36:17 LOG5 begin_task: Level: (4) ID = <10361> Status = 0 0 0 0 ok 2008-Aug-10 02:36:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 02:36:17 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-10 02:36:17 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-10 02:36:17 LOG5 end_task: Level: (4) ID = <10361> Status = 0 0 0 0 ok 2008-Aug-10 02:36:17 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-10 02:36:17 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Aug-10 02:36:17 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-10 02:36:17 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Aug-10 02:36:17 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-10 02:36:17 LOG5 begin_task: Level: (4) ID = <10362> Status = 0 0 0 0 ok 2008-Aug-10 02:36:17 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-10 02:36:17 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-10 02:36:17 LOG5 end_task: Level: (4) ID = <10362> Status = 0 0 0 0 ok 2008-Aug-10 02:36:17 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-10 02:36:17 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Aug-10 02:36:17 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Aug-10 02:36:17 LOG5 end_task: Level: (3) ID = <10359> Status = 0 0 0 0 ok 2008-Aug-10 02:36:17 LOG5 dopset_later: Calling 'dopset_later 42.687496309895494' 2008-Aug-10 02:36:17 INFO3 dopset_later: Setting Doppler correction for 02:37:00 (42.7 seconds from now) 2008-Aug-10 02:36:17 LOG5 antvel: Calling 'antvel 74.090000 9.005128 F 42.687496309895494' 2008-Aug-10 02:36:17 LOG2 antvel: Transforming current Az = 74.09 ZA = 9.01 to apparent RA = 22:50:27.2 Dec = +15:40:51.0 2008-Aug-10 02:36:17 LOG2 antvel: Parameters to Doppler: Heliocentric 23820 2008 223 0.0 2008-Aug-10 02:36:17 INFO5 antvel: Computed antenna velocity: -14.33915 km/s 2008-Aug-10 02:36:17 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-14.339147155699999 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Aug-10 02:36:17 INFO4 dopset_gen: New sky frequencies: 1381.309497 1381.309497 1381.309497 1381.309497 1381.309497 1381.309497 1381.309497 1381.309497 1381.309497 2008-Aug-10 02:36:17 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.309497 sky0=1381.309497 sky1=1381.309497 sky2=1381.309497 sky3=1381.309497 sky4=1381.309497 sky5=1381.309497 sky6=1381.309497 sky7=1381.309497 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-10 02:36:17 LOG2 dopset_gen: Result from 'sky2syn': 1631.309497 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-10 02:36:17 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631309497.0} 2008-Aug-10 02:36:17 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 02:36:17 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Aug-10 02:36:17 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Aug-10 02:36:17 INFO5 fixed_driftmap: Tracking J2000 position: RA = 22:49:22.0 Dec = +15:38:06.5 2008-Aug-10 02:36:17 LOG3 track_source: Calling 'track_source AGES7448_p3_095 224922.0 153806.5 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Aug-10 02:36:17 START begin_task: Starting task 'sending tracking commands' 2008-Aug-10 02:36:17 LOG5 begin_task: Level: (3) ID = <10363> Status = 0 0 0 0 ok 2008-Aug-10 02:36:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7448_p3_095} INFO {Slewing to source 'AGES7448_p3_095' ...} 2008-Aug-10 02:36:18 INFO1 track_source: Starting to track AGES7448_p3_095 2008-Aug-10 02:36:18 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7448_p3_095" 2008-Aug-10 02:36:18 LOG3 vw_send: To DATATAKING: set ra 224922.0 2008-Aug-10 02:36:18 LOG3 vw_send: To DATATAKING: set dec 153806.5 2008-Aug-10 02:36:18 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Aug-10 02:36:18 LOG3 vw_send: To DATATAKING: pnt tr 224922.0 153806.5 -CJ 2008-Aug-10 02:36:18 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Aug-10 02:36:18 STOP finish_task: Finishing task 'sending tracking commands' 2008-Aug-10 02:36:18 LOG5 finish_task: Level: (3) ID = <10363> Status = 0 0 0 0 ok 2008-Aug-10 02:36:18 INFO2 finish_task: DONE finished sending: tracking commands 2008-Aug-10 02:36:18 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 02:36:18 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Aug-10 02:36:18 LOG5 end_task: Level: (3) ID = <10363> Status = 0 0 0 0 ok 2008-Aug-10 02:36:18 START begin_task: Starting task 'waiting on telescope' 2008-Aug-10 02:36:18 LOG5 begin_task: Level: (3) ID = <10364> Status = 0 0 0 0 ok 2008-Aug-10 02:36:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Aug-10 02:36:18 LOG3 waittrk: Start waittrk 5 2008-Aug-10 02:36:18 START begin_task: Starting task 'waiting on telescope movement' 2008-Aug-10 02:36:18 LOG5 begin_task: Level: (4) ID = <10365> Status = 0 0 0 0 ok 2008-Aug-10 02:36:18 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631309497.0} 2008-Aug-10 02:36:18 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 02:36:18 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7448_p3_095" 2008-Aug-10 02:36:18 LOG4 got_cormsg: From DATATAKING: set ra 224922.0 2008-Aug-10 02:36:18 LOG4 got_cormsg: From DATATAKING: set dec 153806.5 2008-Aug-10 02:36:18 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Aug-10 02:36:18 LOG4 got_cormsg: From DATATAKING: vw% 224922.0 2008-Aug-10 02:36:18 LOG4 got_cormsg: From DATATAKING: vw% 153806.5 2008-Aug-10 02:36:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 02:36:18 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Aug-10 02:36:18 LOG4 got_cormsg: From DATATAKING: pnt tr 224922.0 153806.5 -CJ 2008-Aug-10 02:36:18 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Aug-10 02:36:18 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2008-Aug-10 02:36:23 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Aug-10 02:36:23 LOG5 end_task: Level: (4) ID = <10365> Status = 0 0 0 0 ok 2008-Aug-10 02:36:23 START begin_task: Starting task 'waiting on telescope on source' 2008-Aug-10 02:36:23 LOG5 begin_task: Level: (4) ID = <10366> Status = 0 0 0 0 ok 2008-Aug-10 02:36:25 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Aug-10 02:36:25 LOG5 end_task: Level: (4) ID = <10366> Status = 0 0 0 0 ok 2008-Aug-10 02:36:25 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Aug-10 02:36:25 INFO2 waittrk: Now tracking AGES7448_p3_095 2008-Aug-10 02:36:25 LOG4 waittrk: Current telescope position: Az = 434.02 ZA = 9.01 2008-Aug-10 02:36:25 STOP finish_task: Finishing task 'waiting on telescope' 2008-Aug-10 02:36:25 LOG5 finish_task: Level: (3) ID = <10364> Status = 0 0 0 0 ok 2008-Aug-10 02:36:25 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Aug-10 02:36:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 02:36:25 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Aug-10 02:36:25 LOG5 end_task: Level: (3) ID = <10364> Status = 0 0 0 0 ok 2008-Aug-10 02:36:25 START begin_task: Starting task 'adjusting WAPP power' 2008-Aug-10 02:36:25 LOG5 begin_task: Level: (3) ID = <10367> Status = 0 0 0 0 ok 2008-Aug-10 02:36:25 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Aug-10 02:36:25 INFO2 adjust_power: Starting to adjust WAPP power 2008-Aug-10 02:36:25 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Aug-10 02:36:25 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Aug-10 02:36:25 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 02:36:25 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Aug-10 02:36:25 LOG5 begin_task: Level: (4) ID = <10368> Status = 0 0 0 0 ok 2008-Aug-10 02:36:25 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Aug-10 02:36:25 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 02:36:28 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 02:36:28 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-10 02:36:28 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Aug-10 02:36:28 LOG5 end_task: Level: (4) ID = <10368> Status = 0 0 0 0 ok 2008-Aug-10 02:36:28 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Aug-10 02:36:28 START begin_task: Starting task 'adjusting WAPP power' 2008-Aug-10 02:36:28 LOG5 begin_task: Level: (4) ID = <10369> Status = 0 0 0 0 ok 2008-Aug-10 02:36:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Aug-10 02:36:28 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Aug-10 02:36:28 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Aug-10 02:36:28 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Aug-10 02:36:28 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Aug-10 02:36:28 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Aug-10 02:36:28 LOG5 begin_task: Level: (5) ID = <10370> Status = 0 0 0 0 ok 2008-Aug-10 02:36:28 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 02:36:28 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Aug-10 02:36:29 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 6 dB 2008-Aug-10 02:36:29 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 2 dB --- beam 7: 2 2 dB 2008-Aug-10 02:36:29 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 2 dB --- beam 5: 5 5 dB 2008-Aug-10 02:36:29 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 5 3 dB --- beam 3: 3 3 dB 2008-Aug-10 02:36:29 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Aug-10 02:36:29 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Aug-10 02:36:29 LOG5 end_task: Level: (5) ID = <10370> Status = 0 0 0 0 ok 2008-Aug-10 02:36:29 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.992 1.007 ALFA beam 1: 0.987 0.917 2008-Aug-10 02:36:29 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.109 1.083 ALFA beam 3: 1.064 0.896 2008-Aug-10 02:36:29 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.077 1.069 ALFA beam 5: 1.077 0.946 2008-Aug-10 02:36:29 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.108 0.955 ALFA beam 7: 0.979 1.053 2008-Aug-10 02:36:29 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Aug-10 02:36:29 LOG5 finish_task: Level: (4) ID = <10369> Status = 0 0 0 0 ok 2008-Aug-10 02:36:29 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Aug-10 02:36:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 02:36:29 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Aug-10 02:36:29 LOG5 end_task: Level: (4) ID = <10369> Status = 0 0 0 0 ok 2008-Aug-10 02:36:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Aug-10 02:36:29 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Aug-10 02:36:29 LOG5 finish_task: Level: (3) ID = <10367> Status = 0 0 0 0 ok 2008-Aug-10 02:36:29 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Aug-10 02:36:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 02:36:29 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Aug-10 02:36:29 LOG5 end_task: Level: (3) ID = <10367> Status = 0 0 0 0 ok 2008-Aug-10 02:36:29 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 RM 2008-Aug-10 02:36:29 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 RM 2008-Aug-10 02:36:29 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 RM 2008-Aug-10 02:36:29 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 RM 2008-Aug-10 02:36:29 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Aug-10 02:36:29 START begin_task: Starting task 'WAPP calibration' 2008-Aug-10 02:36:29 LOG5 begin_task: Level: (3) ID = <10371> Status = 0 0 0 0 ok 2008-Aug-10 02:36:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Aug-10 02:36:29 START begin_task: Starting task 'selecting calibration type' 2008-Aug-10 02:36:29 LOG5 begin_task: Level: (4) ID = <10372> Status = 0 0 0 0 ok 2008-Aug-10 02:36:29 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Aug-10 02:36:29 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Aug-10 02:36:29 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 02:36:29 START begin_task: Starting task 'waiting on setcal' 2008-Aug-10 02:36:29 LOG5 begin_task: Level: (5) ID = <10373> Status = 0 0 0 0 ok 2008-Aug-10 02:36:29 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 RM' 2008-Aug-10 02:36:29 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Aug-10 02:36:29 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 02:36:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 02:36:29 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-10 02:36:29 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Aug-10 02:36:29 LOG5 end_task: Level: (5) ID = <10373> Status = 0 0 0 0 ok 2008-Aug-10 02:36:29 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Aug-10 02:36:29 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-10 02:36:29 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Aug-10 02:36:29 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-10 02:36:29 LOG5 begin_task: Level: (5) ID = <10374> Status = 0 0 0 0 ok 2008-Aug-10 02:36:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 02:36:30 NOTE WAPPDATA-new_file: New FITS file: wapp.20080810.a2048.0007.fits 2008-Aug-10 02:36:30 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080810.a2048.0007.fits} 2008-Aug-10 02:36:30 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-10 02:36:30 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-10 02:36:30 LOG5 end_task: Level: (5) ID = <10374> Status = 0 0 0 0 ok 2008-Aug-10 02:36:30 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-10 02:36:30 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Aug-10 02:36:30 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-10 02:36:30 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Aug-10 02:36:30 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-10 02:36:30 LOG5 begin_task: Level: (5) ID = <10375> Status = 0 0 0 0 ok 2008-Aug-10 02:36:30 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-10 02:36:30 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-10 02:36:30 LOG5 end_task: Level: (5) ID = <10375> Status = 0 0 0 0 ok 2008-Aug-10 02:36:30 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-10 02:36:30 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Aug-10 02:36:30 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Aug-10 02:36:30 LOG5 end_task: Level: (4) ID = <10372> Status = 0 0 0 0 ok 2008-Aug-10 02:36:30 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Aug-10 02:36:30 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Aug-10 02:36:30 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Aug-10 02:36:30 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-10 02:36:30 LOG5 begin_task: Level: (4) ID = <10376> Status = 0 0 0 0 ok 2008-Aug-10 02:36:30 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-10 02:36:30 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Aug-10 02:36:30 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-10 02:36:30 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-10 02:36:30 LOG5 end_task: Level: (4) ID = <10376> Status = 0 0 0 0 ok 2008-Aug-10 02:36:30 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Aug-10 02:36:30 LOG4 take_data: Calling 'take_data 5 5 CAL ON -' 2008-Aug-10 02:36:30 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-10 02:36:30 LOG5 begin_task: Level: (4) ID = <10377> Status = 0 0 0 0 ok 2008-Aug-10 02:36:30 LOG5 log_alfabeam: Parameters: 22.822777777777777 15.635138888888889 23.432311 2008.6108382766749 -49.500027 2008-Aug-10 02:36:30 LOG4 log_alfabeam: ALFABEAM 0 22.822777777777787 15.635138888888896 2008-Aug-10 02:36:30 LOG4 log_alfabeam: ALFABEAM 1 22.822116669574157 15.726500435242361 2008-Aug-10 02:36:30 LOG4 log_alfabeam: ALFABEAM 2 22.816150336300513 15.666297768745208 2008-Aug-10 02:36:30 LOG4 log_alfabeam: ALFABEAM 3 22.816856705443598 15.574032608783824 2008-Aug-10 02:36:30 LOG4 log_alfabeam: ALFABEAM 4 22.823504830112995 15.543693946029419 2008-Aug-10 02:36:30 LOG4 log_alfabeam: ALFABEAM 5 22.829405458926711 15.605059273677199 2008-Aug-10 02:36:30 LOG4 log_alfabeam: ALFABEAM 6 22.828723829430924 15.695603398518362 2008-Aug-10 02:36:30 INFO2 take_data: Starting WAPP scan: 822300065 2008-Aug-10 02:36:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Aug-10 02:36:31 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-10 02:36:31 LOG5 begin_task: Level: (5) ID = <10378> Status = 0 0 0 0 ok 2008-Aug-10 02:36:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-10 02:36:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23792.00 2008-Aug-10 02:36:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.309497 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-10 02:36:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.309497 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 02:36:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.309497 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 02:36:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.309497 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 02:36:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.309497 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 02:36:37 LOG3 WAPP=1+3+4-save_rfcalc: Channel 5: Sky freq = 1381.309497 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 02:36:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.309497 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 02:36:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.309497 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 02:36:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.309497 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 02:36:37 LOG3 WAPP=2-save_rfcalc: Channel 5: Sky freq = 1381.309497 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 02:36:37 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-10 02:36:37 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-10 02:36:37 LOG5 end_task: Level: (5) ID = <10378> Status = 0 0 0 0 ok 2008-Aug-10 02:36:37 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-10 02:36:37 LOG5 end_task: Level: (4) ID = <10377> Status = 0 0 0 0 ok 2008-Aug-10 02:36:37 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Aug-10 02:36:37 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Aug-10 02:36:37 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Aug-10 02:36:37 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-10 02:36:37 LOG5 begin_task: Level: (4) ID = <10379> Status = 0 0 0 0 ok 2008-Aug-10 02:36:38 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-10 02:36:38 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-10 02:36:38 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-10 02:36:38 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-10 02:36:38 LOG5 end_task: Level: (4) ID = <10379> Status = 0 0 0 0 ok 2008-Aug-10 02:36:38 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Aug-10 02:36:38 LOG4 take_data: Calling 'take_data 5 5 CAL OFF -' 2008-Aug-10 02:36:38 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-10 02:36:38 LOG5 begin_task: Level: (4) ID = <10380> Status = 0 0 0 0 ok 2008-Aug-10 02:36:38 LOG5 log_alfabeam: Parameters: 22.822777777777777 15.635138888888889 23.434261 2008.6108384984916 -49.500027 2008-Aug-10 02:36:38 LOG4 log_alfabeam: ALFABEAM 0 22.822777777777777 15.635138888888900 2008-Aug-10 02:36:38 LOG4 log_alfabeam: ALFABEAM 1 22.822121873604626 15.726508542261307 2008-Aug-10 02:36:38 LOG4 log_alfabeam: ALFABEAM 2 22.816152141397989 15.666376310025436 2008-Aug-10 02:36:38 LOG4 log_alfabeam: ALFABEAM 3 22.816853129740696 15.574105220686352 2008-Aug-10 02:36:38 LOG4 log_alfabeam: ALFABEAM 4 22.823499426603465 15.543685291325376 2008-Aug-10 02:36:38 LOG4 log_alfabeam: ALFABEAM 5 22.829403707535480 15.604977363037433 2008-Aug-10 02:36:38 LOG4 log_alfabeam: ALFABEAM 6 22.828727303747705 15.695532299680488 2008-Aug-10 02:36:38 INFO2 take_data: Starting WAPP scan: 822300066 2008-Aug-10 02:36:38 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Aug-10 02:36:38 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-10 02:36:38 LOG5 begin_task: Level: (5) ID = <10381> Status = 0 0 0 0 ok 2008-Aug-10 02:36:38 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-10 02:36:38 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23799.00 2008-Aug-10 02:36:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.309497 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-10 02:36:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.309497 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 02:36:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.309497 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 02:36:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.309497 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 02:36:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.309497 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 02:36:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.309497 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 02:36:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.309497 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 02:36:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.309497 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 02:36:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.309497 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 02:36:44 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Aug-10 02:36:44 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-10 02:36:44 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-10 02:36:44 LOG5 end_task: Level: (5) ID = <10381> Status = 0 0 0 0 ok 2008-Aug-10 02:36:44 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-10 02:36:44 LOG5 end_task: Level: (4) ID = <10380> Status = 0 0 0 0 ok 2008-Aug-10 02:36:44 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Aug-10 02:36:44 STOP finish_task: Finishing task 'WAPP calibration' 2008-Aug-10 02:36:44 LOG5 finish_task: Level: (3) ID = <10371> Status = 0 0 0 0 ok 2008-Aug-10 02:36:44 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Aug-10 02:36:44 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 02:36:44 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Aug-10 02:36:44 LOG5 end_task: Level: (3) ID = <10371> Status = 0 0 0 0 ok 2008-Aug-10 02:36:44 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Aug-10 02:36:45 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 74.09 and ZA = 9.01 2008-Aug-10 02:36:45 LOG3 track_source: Calling 'track_source AGES7448_p3_095 74.09 9.0051283034 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Aug-10 02:36:45 START begin_task: Starting task 'sending tracking commands' 2008-Aug-10 02:36:45 LOG5 begin_task: Level: (3) ID = <10382> Status = 0 0 0 0 ok 2008-Aug-10 02:36:45 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7448_p3_095} INFO {Slewing to source 'AGES7448_p3_095' ...} 2008-Aug-10 02:36:45 INFO1 track_source: Starting to track AGES7448_p3_095 2008-Aug-10 02:36:45 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7448_p3_095" 2008-Aug-10 02:36:45 LOG3 vw_send: To DATATAKING: set ra 74.09 2008-Aug-10 02:36:45 LOG3 vw_send: To DATATAKING: set dec 9.0051283034 2008-Aug-10 02:36:45 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Aug-10 02:36:45 LOG3 vw_send: To DATATAKING: pnt tr 74.09 9.0051283034 -CF 2008-Aug-10 02:36:45 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Aug-10 02:36:45 STOP finish_task: Finishing task 'sending tracking commands' 2008-Aug-10 02:36:45 LOG5 finish_task: Level: (3) ID = <10382> Status = 0 0 0 0 ok 2008-Aug-10 02:36:45 INFO2 finish_task: DONE finished sending: tracking commands 2008-Aug-10 02:36:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 02:36:45 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Aug-10 02:36:45 LOG5 end_task: Level: (3) ID = <10382> Status = 0 0 0 0 ok 2008-Aug-10 02:36:45 LOG1 fixed_driftmap: Parameters: HA = +00:35:58.8 Start = 23:26:26.1 LST = 23:26:10.4 diff = 15.7 secs 2008-Aug-10 02:36:45 INFO2 fixed_driftmap: Waiting 13.7 seconds for RA 22:50:27 2008-Aug-10 02:36:45 INFO2 lstwait: Waiting for 13.7 secs from LST 23:26:10 to LST 23:26:24 ... 2008-Aug-10 02:36:45 LOG4 send_obs_status: To obs_status: <1> TASKTIME 13.69128432813957 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Aug-10 02:36:45 START begin_task: Starting task 'waiting on wait on LST' 2008-Aug-10 02:36:45 LOG5 begin_task: Level: (3) ID = <10383> Status = 0 0 0 0 ok 2008-Aug-10 02:36:45 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7448_p3_095" 2008-Aug-10 02:36:45 LOG4 got_cormsg: From DATATAKING: set ra 74.09 2008-Aug-10 02:36:45 LOG4 got_cormsg: From DATATAKING: set dec 9.0051283034 2008-Aug-10 02:36:45 LOG4 got_cormsg: From DATATAKING: vw% 74.09 2008-Aug-10 02:36:45 LOG4 got_cormsg: From DATATAKING: vw% 9.0051283034 2008-Aug-10 02:36:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 02:36:45 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Aug-10 02:36:45 LOG4 got_cormsg: From DATATAKING: pnt tr 74.09 9.0051283034 -CF 2008-Aug-10 02:36:45 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Aug-10 02:36:45 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Aug-10 02:36:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 02:36:59 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Aug-10 02:36:59 LOG5 end_task: Level: (3) ID = <10383> Status = 0 0 0 0 ok 2008-Aug-10 02:36:59 LOG4 lstwait: Finished waiting 0.31 seconds late 2008-Aug-10 02:36:59 INFO3 lstwait: Finished waiting 2008-Aug-10 02:36:59 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Aug-10 02:36:59 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Aug-10 02:36:59 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Aug-10 02:36:59 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Aug-10 02:36:59 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Aug-10 02:36:59 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ -' 2008-Aug-10 02:36:59 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-10 02:36:59 LOG5 begin_task: Level: (3) ID = <10384> Status = 0 0 0 0 ok 2008-Aug-10 02:36:59 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-10 02:36:59 INFO2 take_data: Starting WAPP scan: 822300067 2008-Aug-10 02:36:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Aug-10 02:36:59 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-10 02:36:59 LOG5 begin_task: Level: (4) ID = <10385> Status = 0 0 0 0 ok 2008-Aug-10 02:36:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-10 02:36:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23820.00 2008-Aug-10 02:37:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.309497 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-10 02:37:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.309497 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 02:37:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.309497 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 02:37:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.309497 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 02:37:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.309497 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 02:37:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.309497 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 02:37:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.309497 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 02:37:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.309497 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 02:37:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.309497 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 02:57:00 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-10 02:57:00 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-10 02:57:00 LOG5 end_task: Level: (4) ID = <10385> Status = 0 0 0 0 ok 2008-Aug-10 02:57:00 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-10 02:57:00 LOG5 end_task: Level: (3) ID = <10384> Status = 0 0 0 0 ok 2008-Aug-10 02:57:00 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Aug-10 02:57:00 LOG5 finish_task: Level: (2) ID = <10352> Status = 0 0 0 0 ok 2008-Aug-10 02:57:00 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Aug-10 02:57:00 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Aug-10 02:57:00 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Aug-10 02:57:00 LOG5 end_task: Level: (2) ID = <10352> Status = 0 0 0 0 ok 2008-Aug-10 02:57:00 COMMAND run_command_line: EXECUTING command 40: 'ENDIF' 2008-Aug-10 02:57:00 COMMAND run_command_line: EXECUTING command 43: 'IF LSTSLEW(AGES7448_p3_096) < 234927 THEN' 2008-Aug-10 02:57:01 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES7448_p3_096) < 234927 2008-Aug-10 02:57:01 INFO5 is_if_valid: Condition parsed as: 23.806579666666668 < 23.824166666666667 2008-Aug-10 02:57:01 COMMAND run_command_line: EXECUTING command 44: 'FIXEDDRIFT az=81.40 alfaangle=-55.9 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p3_096 ra=225000.00 dec=153630.00' 2008-Aug-10 02:57:01 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Aug-10 02:57:01 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Aug-10 02:57:01 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 81.40 -55.9 hcorcal 5 tracking no first 1 AGES7448_p3_096 225000.00 153630.00 J 8500.0 Heliocentric velocity(optical)' 2008-Aug-10 02:57:01 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Aug-10 02:57:01 LOG5 begin_task: Level: (2) ID = <10386> Status = 0 0 0 0 ok 2008-Aug-10 02:57:01 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES7448_p3_095' 2008-Aug-10 02:57:01 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Aug-10 02:57:01 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES7448_p3_096} 2008-Aug-10 02:57:01 INFO3 fixed_driftmap: Sending telescope to Az = 81.40 and ZA = 14.36 2008-Aug-10 02:57:01 LOG3 track_source: Calling 'track_source AGES7448_p3_096 81.40 14.3566630285 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Aug-10 02:57:01 START begin_task: Starting task 'sending tracking commands' 2008-Aug-10 02:57:01 LOG5 begin_task: Level: (3) ID = <10387> Status = 0 0 0 0 ok 2008-Aug-10 02:57:02 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7448_p3_096} INFO {Slewing to source 'AGES7448_p3_096' ...} 2008-Aug-10 02:57:02 INFO1 track_source: Starting to track AGES7448_p3_096 2008-Aug-10 02:57:02 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7448_p3_096" 2008-Aug-10 02:57:02 LOG3 vw_send: To DATATAKING: set ra 81.40 2008-Aug-10 02:57:02 LOG3 vw_send: To DATATAKING: set dec 14.3566630285 2008-Aug-10 02:57:02 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Aug-10 02:57:02 LOG3 vw_send: To DATATAKING: pnt tr 81.40 14.3566630285 -CF 2008-Aug-10 02:57:02 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Aug-10 02:57:02 STOP finish_task: Finishing task 'sending tracking commands' 2008-Aug-10 02:57:02 LOG5 finish_task: Level: (3) ID = <10387> Status = 0 0 0 0 ok 2008-Aug-10 02:57:02 INFO2 finish_task: DONE finished sending: tracking commands 2008-Aug-10 02:57:02 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 02:57:02 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Aug-10 02:57:02 LOG5 end_task: Level: (3) ID = <10387> Status = 0 0 0 0 ok 2008-Aug-10 02:57:02 START begin_task: Starting task 'rotate ALFA to -55.9 degrees' 2008-Aug-10 02:57:02 LOG5 begin_task: Level: (3) ID = <10388> Status = 0 0 0 0 ok 2008-Aug-10 02:57:02 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -55.9 degrees ...} 2008-Aug-10 02:57:02 INFO2 rotate_alfa: ALFA commanded to -55.9 degrees 2008-Aug-10 02:57:02 LOG3 sock_errsend: To ALFAMOTOR: POSITION -55.9 REPLY 2008-Aug-10 02:57:02 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Aug-10 02:57:02 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Aug-10 02:57:02 LOG5 begin_task: Level: (4) ID = <10389> Status = 0 0 0 0 ok 2008-Aug-10 02:57:02 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7448_p3_096" 2008-Aug-10 02:57:02 LOG4 got_cormsg: From DATATAKING: set ra 81.40 2008-Aug-10 02:57:02 LOG4 got_cormsg: From DATATAKING: set dec 14.3566630285 2008-Aug-10 02:57:02 LOG4 got_cormsg: From DATATAKING: vw% 81.40 2008-Aug-10 02:57:02 LOG4 got_cormsg: From DATATAKING: vw% 14.3566630285 2008-Aug-10 02:57:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 02:57:02 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Aug-10 02:57:02 LOG4 got_cormsg: From DATATAKING: pnt tr 81.40 14.3566630285 -CF 2008-Aug-10 02:57:02 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Aug-10 02:57:02 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Aug-10 02:57:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 02:57:07 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Aug-10 02:57:07 INFO3 alfa_motor: ALFA rotator in-position -55.90 degrees 2008-Aug-10 02:57:07 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Aug-10 02:57:07 LOG5 end_task: Level: (4) ID = <10389> Status = 0 0 0 0 ok 2008-Aug-10 02:57:07 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Aug-10 02:57:07 STOP finish_task: Finishing task 'rotate ALFA to -55.9 degrees' 2008-Aug-10 02:57:07 LOG5 finish_task: Level: (3) ID = <10388> Status = 0 0 0 0 ok 2008-Aug-10 02:57:07 INFO2 finish_task: DONE finished configuration: rotating ALFA to -55.9 degrees 2008-Aug-10 02:57:07 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 02:57:07 STOP end_task: Finishing task 'rotate ALFA to -55.9 degrees' with status 'OK' 2008-Aug-10 02:57:07 LOG5 end_task: Level: (3) ID = <10388> Status = 0 0 0 0 ok 2008-Aug-10 02:57:07 START begin_task: Starting task 'waiting on telescope' 2008-Aug-10 02:57:07 LOG5 begin_task: Level: (3) ID = <10390> Status = 0 0 0 0 ok 2008-Aug-10 02:57:07 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Aug-10 02:57:07 LOG3 waittrk: Start waittrk 5 2008-Aug-10 02:57:07 START begin_task: Starting task 'waiting on telescope movement' 2008-Aug-10 02:57:07 LOG5 begin_task: Level: (4) ID = <10391> Status = 0 0 0 0 ok 2008-Aug-10 02:57:12 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Aug-10 02:57:12 LOG5 end_task: Level: (4) ID = <10391> Status = 0 0 0 0 ok 2008-Aug-10 02:57:12 START begin_task: Starting task 'waiting on telescope on source' 2008-Aug-10 02:57:12 LOG5 begin_task: Level: (4) ID = <10392> Status = 0 0 0 0 ok 2008-Aug-10 02:59:20 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Aug-10 02:59:20 LOG5 end_task: Level: (4) ID = <10392> Status = 0 0 0 0 ok 2008-Aug-10 02:59:20 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Aug-10 02:59:21 INFO2 waittrk: Now tracking AGES7448_p3_096 2008-Aug-10 02:59:21 LOG4 waittrk: Current telescope position: Az = 441.19 ZA = 14.36 2008-Aug-10 02:59:21 STOP finish_task: Finishing task 'waiting on telescope' 2008-Aug-10 02:59:21 LOG5 finish_task: Level: (3) ID = <10390> Status = 0 0 0 0 ok 2008-Aug-10 02:59:21 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Aug-10 02:59:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 02:59:21 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Aug-10 02:59:21 LOG5 end_task: Level: (3) ID = <10390> Status = 0 0 0 0 ok 2008-Aug-10 02:59:21 START begin_task: Starting task 'selecting calibration type' 2008-Aug-10 02:59:21 LOG5 begin_task: Level: (3) ID = <10393> Status = 0 0 0 0 ok 2008-Aug-10 02:59:21 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Aug-10 02:59:21 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Aug-10 02:59:21 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 02:59:21 START begin_task: Starting task 'waiting on setcal' 2008-Aug-10 02:59:21 LOG5 begin_task: Level: (4) ID = <10394> Status = 0 0 0 0 ok 2008-Aug-10 02:59:21 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Aug-10 02:59:21 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 02:59:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 02:59:22 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-10 02:59:22 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Aug-10 02:59:22 LOG5 end_task: Level: (4) ID = <10394> Status = 0 0 0 0 ok 2008-Aug-10 02:59:22 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Aug-10 02:59:22 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-10 02:59:22 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Aug-10 02:59:22 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-10 02:59:22 LOG5 begin_task: Level: (4) ID = <10395> Status = 0 0 0 0 ok 2008-Aug-10 02:59:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 02:59:22 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-10 02:59:22 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-10 02:59:22 LOG5 end_task: Level: (4) ID = <10395> Status = 0 0 0 0 ok 2008-Aug-10 02:59:22 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-10 02:59:22 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Aug-10 02:59:22 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-10 02:59:22 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Aug-10 02:59:22 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-10 02:59:22 LOG5 begin_task: Level: (4) ID = <10396> Status = 0 0 0 0 ok 2008-Aug-10 02:59:22 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-10 02:59:22 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-10 02:59:22 LOG5 end_task: Level: (4) ID = <10396> Status = 0 0 0 0 ok 2008-Aug-10 02:59:22 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-10 02:59:22 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Aug-10 02:59:22 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Aug-10 02:59:22 LOG5 end_task: Level: (3) ID = <10393> Status = 0 0 0 0 ok 2008-Aug-10 02:59:22 LOG5 dopset_later: Calling 'dopset_later 36.343756838745982' 2008-Aug-10 02:59:22 INFO3 dopset_later: Setting Doppler correction for 02:59:57 (36.3 seconds from now) 2008-Aug-10 02:59:22 LOG5 antvel: Calling 'antvel 81.400000 14.356663 F 36.343756838745982' 2008-Aug-10 02:59:22 LOG2 antvel: Transforming current Az = 81.40 ZA = 14.36 to apparent RA = 22:50:27.2 Dec = +15:39:21.0 2008-Aug-10 02:59:22 LOG2 antvel: Parameters to Doppler: Heliocentric 25197 2008 223 0.0 2008-Aug-10 02:59:22 INFO5 antvel: Computed antenna velocity: -14.28892 km/s 2008-Aug-10 02:59:22 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-14.2889215981 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Aug-10 02:59:22 INFO4 dopset_gen: New sky frequencies: 1381.309265 1381.309265 1381.309265 1381.309265 1381.309265 1381.309265 1381.309265 1381.309265 1381.309265 2008-Aug-10 02:59:22 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.309265 sky0=1381.309265 sky1=1381.309265 sky2=1381.309265 sky3=1381.309265 sky4=1381.309265 sky5=1381.309265 sky6=1381.309265 sky7=1381.309265 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-10 02:59:22 LOG2 dopset_gen: Result from 'sky2syn': 1631.309265 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-10 02:59:22 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631309265.0} 2008-Aug-10 02:59:22 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 02:59:22 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Aug-10 02:59:22 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Aug-10 02:59:22 INFO5 fixed_driftmap: Tracking J2000 position: RA = 22:49:28.4 Dec = +15:36:36.5 2008-Aug-10 02:59:22 LOG3 track_source: Calling 'track_source AGES7448_p3_096 224928.4 153636.5 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Aug-10 02:59:22 START begin_task: Starting task 'sending tracking commands' 2008-Aug-10 02:59:22 LOG5 begin_task: Level: (3) ID = <10397> Status = 0 0 0 0 ok 2008-Aug-10 02:59:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7448_p3_096} INFO {Slewing to source 'AGES7448_p3_096' ...} 2008-Aug-10 02:59:22 INFO1 track_source: Starting to track AGES7448_p3_096 2008-Aug-10 02:59:22 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7448_p3_096" 2008-Aug-10 02:59:22 LOG3 vw_send: To DATATAKING: set ra 224928.4 2008-Aug-10 02:59:22 LOG3 vw_send: To DATATAKING: set dec 153636.5 2008-Aug-10 02:59:22 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Aug-10 02:59:22 LOG3 vw_send: To DATATAKING: pnt tr 224928.4 153636.5 -CJ 2008-Aug-10 02:59:22 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Aug-10 02:59:22 STOP finish_task: Finishing task 'sending tracking commands' 2008-Aug-10 02:59:22 LOG5 finish_task: Level: (3) ID = <10397> Status = 0 0 0 0 ok 2008-Aug-10 02:59:22 INFO2 finish_task: DONE finished sending: tracking commands 2008-Aug-10 02:59:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 02:59:22 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Aug-10 02:59:22 LOG5 end_task: Level: (3) ID = <10397> Status = 0 0 0 0 ok 2008-Aug-10 02:59:22 START begin_task: Starting task 'waiting on telescope' 2008-Aug-10 02:59:22 LOG5 begin_task: Level: (3) ID = <10398> Status = 0 0 0 0 ok 2008-Aug-10 02:59:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Aug-10 02:59:22 LOG3 waittrk: Start waittrk 5 2008-Aug-10 02:59:22 START begin_task: Starting task 'waiting on telescope movement' 2008-Aug-10 02:59:22 LOG5 begin_task: Level: (4) ID = <10399> Status = 0 0 0 0 ok 2008-Aug-10 02:59:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631309265.0} 2008-Aug-10 02:59:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 02:59:22 LOG4 got_cormsg: From DATATAKING: vw% hdrldsrcnm "AGES7448_p3_096" 2008-Aug-10 02:59:22 LOG4 got_cormsg: From DATATAKING: set ra 224928.4 2008-Aug-10 02:59:22 LOG4 got_cormsg: From DATATAKING: set dec 153636.5 2008-Aug-10 02:59:22 LOG4 got_cormsg: From DATATAKING: vw% vw% 224928.4 2008-Aug-10 02:59:22 LOG4 got_cormsg: From DATATAKING: vw% 153636.5 2008-Aug-10 02:59:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 02:59:22 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Aug-10 02:59:22 LOG4 got_cormsg: From DATATAKING: pnt tr 224928.4 153636.5 -CJ 2008-Aug-10 02:59:22 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Aug-10 02:59:22 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Aug-10 02:59:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 02:59:27 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Aug-10 02:59:27 LOG5 end_task: Level: (4) ID = <10399> Status = 0 0 0 0 ok 2008-Aug-10 02:59:27 START begin_task: Starting task 'waiting on telescope on source' 2008-Aug-10 02:59:27 LOG5 begin_task: Level: (4) ID = <10400> Status = 0 0 0 0 ok 2008-Aug-10 02:59:29 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Aug-10 02:59:29 LOG5 end_task: Level: (4) ID = <10400> Status = 0 0 0 0 ok 2008-Aug-10 02:59:29 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Aug-10 02:59:29 INFO2 waittrk: Now tracking AGES7448_p3_096 2008-Aug-10 02:59:30 LOG4 waittrk: Current telescope position: Az = 441.21 ZA = 14.37 2008-Aug-10 02:59:30 STOP finish_task: Finishing task 'waiting on telescope' 2008-Aug-10 02:59:30 LOG5 finish_task: Level: (3) ID = <10398> Status = 0 0 0 0 ok 2008-Aug-10 02:59:30 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Aug-10 02:59:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 02:59:30 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Aug-10 02:59:30 LOG5 end_task: Level: (3) ID = <10398> Status = 0 0 0 0 ok 2008-Aug-10 02:59:30 START begin_task: Starting task 'adjusting WAPP power' 2008-Aug-10 02:59:30 LOG5 begin_task: Level: (3) ID = <10401> Status = 0 0 0 0 ok 2008-Aug-10 02:59:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Aug-10 02:59:30 INFO2 adjust_power: Starting to adjust WAPP power 2008-Aug-10 02:59:30 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Aug-10 02:59:30 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Aug-10 02:59:30 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 02:59:30 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Aug-10 02:59:30 LOG5 begin_task: Level: (4) ID = <10402> Status = 0 0 0 0 ok 2008-Aug-10 02:59:30 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Aug-10 02:59:30 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 02:59:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 02:59:33 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-10 02:59:33 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Aug-10 02:59:33 LOG5 end_task: Level: (4) ID = <10402> Status = 0 0 0 0 ok 2008-Aug-10 02:59:33 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Aug-10 02:59:33 START begin_task: Starting task 'adjusting WAPP power' 2008-Aug-10 02:59:33 LOG5 begin_task: Level: (4) ID = <10403> Status = 0 0 0 0 ok 2008-Aug-10 02:59:33 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Aug-10 02:59:33 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Aug-10 02:59:33 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Aug-10 02:59:33 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Aug-10 02:59:33 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Aug-10 02:59:33 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Aug-10 02:59:33 LOG5 begin_task: Level: (5) ID = <10404> Status = 0 0 0 0 ok 2008-Aug-10 02:59:33 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Aug-10 02:59:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 02:59:33 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 6 dB 2008-Aug-10 02:59:33 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 2 dB --- beam 5: 6 5 dB 2008-Aug-10 02:59:33 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 3 dB 2008-Aug-10 02:59:33 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 2 3 dB 2008-Aug-10 02:59:33 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Aug-10 02:59:33 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Aug-10 02:59:33 LOG5 end_task: Level: (5) ID = <10404> Status = 0 0 0 0 ok 2008-Aug-10 02:59:33 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.029 1.046 ALFA beam 1: 1.020 0.948 2008-Aug-10 02:59:33 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.925 0.872 ALFA beam 3: 1.112 0.938 2008-Aug-10 02:59:33 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.116 1.121 ALFA beam 5: 0.888 1.012 2008-Aug-10 02:59:33 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.937 1.015 ALFA beam 7: 1.034 0.897 2008-Aug-10 02:59:33 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Aug-10 02:59:33 LOG5 finish_task: Level: (4) ID = <10403> Status = 0 0 0 0 ok 2008-Aug-10 02:59:33 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Aug-10 02:59:33 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 02:59:33 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Aug-10 02:59:33 LOG5 end_task: Level: (4) ID = <10403> Status = 0 0 0 0 ok 2008-Aug-10 02:59:33 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Aug-10 02:59:33 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Aug-10 02:59:33 LOG5 finish_task: Level: (3) ID = <10401> Status = 0 0 0 0 ok 2008-Aug-10 02:59:33 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Aug-10 02:59:33 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 02:59:33 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Aug-10 02:59:33 LOG5 end_task: Level: (3) ID = <10401> Status = 0 0 0 0 ok 2008-Aug-10 02:59:33 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 RM 2008-Aug-10 02:59:33 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 RM 2008-Aug-10 02:59:33 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 RM 2008-Aug-10 02:59:33 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 RM 2008-Aug-10 02:59:34 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Aug-10 02:59:34 START begin_task: Starting task 'WAPP calibration' 2008-Aug-10 02:59:34 LOG5 begin_task: Level: (3) ID = <10405> Status = 0 0 0 0 ok 2008-Aug-10 02:59:34 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Aug-10 02:59:34 START begin_task: Starting task 'selecting calibration type' 2008-Aug-10 02:59:34 LOG5 begin_task: Level: (4) ID = <10406> Status = 0 0 0 0 ok 2008-Aug-10 02:59:34 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Aug-10 02:59:34 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Aug-10 02:59:34 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 02:59:34 START begin_task: Starting task 'waiting on setcal' 2008-Aug-10 02:59:34 LOG5 begin_task: Level: (5) ID = <10407> Status = 0 0 0 0 ok 2008-Aug-10 02:59:34 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 RM' 2008-Aug-10 02:59:34 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Aug-10 02:59:34 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 02:59:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 02:59:34 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-10 02:59:34 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Aug-10 02:59:34 LOG5 end_task: Level: (5) ID = <10407> Status = 0 0 0 0 ok 2008-Aug-10 02:59:34 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Aug-10 02:59:34 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-10 02:59:34 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Aug-10 02:59:34 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-10 02:59:34 LOG5 begin_task: Level: (5) ID = <10408> Status = 0 0 0 0 ok 2008-Aug-10 02:59:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 02:59:34 NOTE WAPPDATA-new_file: New FITS file: wapp.20080810.a2048.0008.fits 2008-Aug-10 02:59:34 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080810.a2048.0008.fits} 2008-Aug-10 02:59:34 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-10 02:59:34 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-10 02:59:34 LOG5 end_task: Level: (5) ID = <10408> Status = 0 0 0 0 ok 2008-Aug-10 02:59:34 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-10 02:59:34 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Aug-10 02:59:34 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-10 02:59:34 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Aug-10 02:59:34 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-10 02:59:34 LOG5 begin_task: Level: (5) ID = <10409> Status = 0 0 0 0 ok 2008-Aug-10 02:59:35 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-10 02:59:35 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-10 02:59:35 LOG5 end_task: Level: (5) ID = <10409> Status = 0 0 0 0 ok 2008-Aug-10 02:59:35 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-10 02:59:35 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Aug-10 02:59:35 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Aug-10 02:59:35 LOG5 end_task: Level: (4) ID = <10406> Status = 0 0 0 0 ok 2008-Aug-10 02:59:35 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Aug-10 02:59:35 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Aug-10 02:59:35 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Aug-10 02:59:35 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-10 02:59:35 LOG5 begin_task: Level: (4) ID = <10410> Status = 0 0 0 0 ok 2008-Aug-10 02:59:35 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-10 02:59:35 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Aug-10 02:59:35 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-10 02:59:35 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-10 02:59:35 LOG5 end_task: Level: (4) ID = <10410> Status = 0 0 0 0 ok 2008-Aug-10 02:59:35 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Aug-10 02:59:35 LOG4 take_data: Calling 'take_data 5 5 CAL ON -' 2008-Aug-10 02:59:35 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-10 02:59:35 LOG5 begin_task: Level: (4) ID = <10411> Status = 0 0 0 0 ok 2008-Aug-10 02:59:35 LOG5 log_alfabeam: Parameters: 22.824555555555552 15.610138888888889 23.817808 2008.6108821329885 -55.900017 2008-Aug-10 02:59:35 LOG4 log_alfabeam: ALFABEAM 0 22.824555555555548 15.610138888888892 2008-Aug-10 02:59:35 LOG4 log_alfabeam: ALFABEAM 1 22.823680841638858 15.700728486529247 2008-Aug-10 02:59:35 LOG4 log_alfabeam: ALFABEAM 2 22.817804297114048 15.640671725008751 2008-Aug-10 02:59:35 LOG4 log_alfabeam: ALFABEAM 3 22.818707551265266 15.549542362868147 2008-Aug-10 02:59:35 LOG4 log_alfabeam: ALFABEAM 4 22.825469077020855 15.519582469512326 2008-Aug-10 02:59:35 LOG4 log_alfabeam: ALFABEAM 5 22.831307360382276 15.580199547342602 2008-Aug-10 02:59:35 LOG4 log_alfabeam: ALFABEAM 6 22.830422370320889 15.670216837319826 2008-Aug-10 02:59:35 INFO2 take_data: Starting WAPP scan: 822300068 2008-Aug-10 02:59:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Aug-10 02:59:35 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-10 02:59:35 LOG5 begin_task: Level: (5) ID = <10412> Status = 0 0 0 0 ok 2008-Aug-10 02:59:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-10 02:59:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 25176.00 2008-Aug-10 02:59:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.309265 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-10 02:59:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.309265 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 02:59:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.309265 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 02:59:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.309265 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 02:59:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.309265 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 02:59:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.309265 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 02:59:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.309265 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 02:59:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.309265 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 02:59:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.309265 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 02:59:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-10 02:59:41 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-10 02:59:41 LOG5 end_task: Level: (5) ID = <10412> Status = 0 0 0 0 ok 2008-Aug-10 02:59:41 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-10 02:59:41 LOG5 end_task: Level: (4) ID = <10411> Status = 0 0 0 0 ok 2008-Aug-10 02:59:41 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Aug-10 02:59:41 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Aug-10 02:59:41 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Aug-10 02:59:41 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-10 02:59:41 LOG5 begin_task: Level: (4) ID = <10413> Status = 0 0 0 0 ok 2008-Aug-10 02:59:41 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-10 02:59:41 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-10 02:59:41 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-10 02:59:41 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-10 02:59:41 LOG5 end_task: Level: (4) ID = <10413> Status = 0 0 0 0 ok 2008-Aug-10 02:59:41 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Aug-10 02:59:41 LOG4 take_data: Calling 'take_data 5 5 CAL OFF -' 2008-Aug-10 02:59:41 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-10 02:59:41 LOG5 begin_task: Level: (4) ID = <10414> Status = 0 0 0 0 ok 2008-Aug-10 02:59:41 LOG5 log_alfabeam: Parameters: 22.824555555555552 15.610138888888889 23.819758 2008.6108823548052 -55.900017 2008-Aug-10 02:59:41 LOG4 log_alfabeam: ALFABEAM 0 22.824555555555545 15.610138888888901 2008-Aug-10 02:59:41 LOG4 log_alfabeam: ALFABEAM 1 22.823682618595775 15.700732110077229 2008-Aug-10 02:59:41 LOG4 log_alfabeam: ALFABEAM 2 22.817804906253500 15.640699326072644 2008-Aug-10 02:59:41 LOG4 log_alfabeam: ALFABEAM 3 22.818706321790071 15.549567305042688 2008-Aug-10 02:59:41 LOG4 log_alfabeam: ALFABEAM 4 22.825467223672128 15.519578616463141 2008-Aug-10 02:59:41 LOG4 log_alfabeam: ALFABEAM 5 22.831306757321244 15.580170673163654 2008-Aug-10 02:59:41 LOG4 log_alfabeam: ALFABEAM 6 22.830423558920923 15.670192777175227 2008-Aug-10 02:59:41 INFO2 take_data: Starting WAPP scan: 822300069 2008-Aug-10 02:59:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Aug-10 02:59:42 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-10 02:59:42 LOG5 begin_task: Level: (5) ID = <10415> Status = 0 0 0 0 ok 2008-Aug-10 02:59:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-10 02:59:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 25183.00 2008-Aug-10 02:59:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.309265 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-10 02:59:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.309265 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 02:59:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.309265 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 02:59:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.309265 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 02:59:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.309265 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 02:59:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.309265 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 02:59:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.309265 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 02:59:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.309265 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 02:59:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.309265 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 02:59:48 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Aug-10 02:59:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-10 02:59:48 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-10 02:59:48 LOG5 end_task: Level: (5) ID = <10415> Status = 0 0 0 0 ok 2008-Aug-10 02:59:48 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-10 02:59:48 LOG5 end_task: Level: (4) ID = <10414> Status = 0 0 0 0 ok 2008-Aug-10 02:59:48 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Aug-10 02:59:48 STOP finish_task: Finishing task 'WAPP calibration' 2008-Aug-10 02:59:48 LOG5 finish_task: Level: (3) ID = <10405> Status = 0 0 0 0 ok 2008-Aug-10 02:59:48 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Aug-10 02:59:48 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 02:59:48 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Aug-10 02:59:48 LOG5 end_task: Level: (3) ID = <10405> Status = 0 0 0 0 ok 2008-Aug-10 02:59:48 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Aug-10 02:59:49 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 81.40 and ZA = 14.36 2008-Aug-10 02:59:49 LOG3 track_source: Calling 'track_source AGES7448_p3_096 81.40 14.3566630285 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Aug-10 02:59:49 START begin_task: Starting task 'sending tracking commands' 2008-Aug-10 02:59:49 LOG5 begin_task: Level: (3) ID = <10416> Status = 0 0 0 0 ok 2008-Aug-10 02:59:49 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7448_p3_096} INFO {Slewing to source 'AGES7448_p3_096' ...} 2008-Aug-10 02:59:49 INFO1 track_source: Starting to track AGES7448_p3_096 2008-Aug-10 02:59:49 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7448_p3_096" 2008-Aug-10 02:59:49 LOG3 vw_send: To DATATAKING: set ra 81.40 2008-Aug-10 02:59:49 LOG3 vw_send: To DATATAKING: set dec 14.3566630285 2008-Aug-10 02:59:49 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Aug-10 02:59:49 LOG3 vw_send: To DATATAKING: pnt tr 81.40 14.3566630285 -CF 2008-Aug-10 02:59:49 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Aug-10 02:59:49 STOP finish_task: Finishing task 'sending tracking commands' 2008-Aug-10 02:59:49 LOG5 finish_task: Level: (3) ID = <10416> Status = 0 0 0 0 ok 2008-Aug-10 02:59:49 INFO2 finish_task: DONE finished sending: tracking commands 2008-Aug-10 02:59:49 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 02:59:49 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Aug-10 02:59:49 LOG5 end_task: Level: (3) ID = <10416> Status = 0 0 0 0 ok 2008-Aug-10 02:59:49 LOG1 fixed_driftmap: Parameters: HA = +00:59:00.2 Start = 23:49:27.5 LST = 23:49:18.1 diff = 9.4 secs 2008-Aug-10 02:59:49 INFO2 fixed_driftmap: Waiting 7.4 seconds for RA 22:50:27 2008-Aug-10 02:59:49 INFO2 lstwait: Waiting for 7.3 secs from LST 23:49:18 to LST 23:49:26 ... 2008-Aug-10 02:59:49 LOG4 send_obs_status: To obs_status: <1> TASKTIME 7.3475448569900559 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Aug-10 02:59:49 START begin_task: Starting task 'waiting on wait on LST' 2008-Aug-10 02:59:49 LOG5 begin_task: Level: (3) ID = <10417> Status = 0 0 0 0 ok 2008-Aug-10 02:59:49 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7448_p3_096" 2008-Aug-10 02:59:49 LOG4 got_cormsg: From DATATAKING: set ra 81.40 2008-Aug-10 02:59:49 LOG4 got_cormsg: From DATATAKING: set dec 14.3566630285 2008-Aug-10 02:59:49 LOG4 got_cormsg: From DATATAKING: vw% 81.40 2008-Aug-10 02:59:49 LOG4 got_cormsg: From DATATAKING: vw% 14.3566630285 2008-Aug-10 02:59:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 02:59:49 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Aug-10 02:59:49 LOG4 got_cormsg: From DATATAKING: pnt tr 81.40 14.3566630285 -CF 2008-Aug-10 02:59:49 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Aug-10 02:59:49 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Aug-10 02:59:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 02:59:56 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Aug-10 02:59:56 LOG5 end_task: Level: (3) ID = <10417> Status = 0 0 0 0 ok 2008-Aug-10 02:59:56 LOG4 lstwait: Finished waiting 0.65 seconds late 2008-Aug-10 02:59:56 INFO3 lstwait: Finished waiting 2008-Aug-10 02:59:56 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Aug-10 02:59:56 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Aug-10 02:59:56 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Aug-10 02:59:56 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Aug-10 02:59:56 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Aug-10 02:59:56 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ -' 2008-Aug-10 02:59:56 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-10 02:59:56 LOG5 begin_task: Level: (3) ID = <10418> Status = 0 0 0 0 ok 2008-Aug-10 02:59:56 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-10 02:59:56 INFO2 take_data: Starting WAPP scan: 822300070 2008-Aug-10 02:59:57 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Aug-10 02:59:57 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-10 02:59:57 LOG5 begin_task: Level: (4) ID = <10419> Status = 0 0 0 0 ok 2008-Aug-10 02:59:57 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-10 02:59:57 INFO1 WAPP=1+2+3+4-start_spectra: start sec 25198.00 2008-Aug-10 02:59:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.309265 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-10 02:59:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.309265 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 02:59:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.309265 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 02:59:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.309265 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 02:59:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.309265 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 02:59:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.309265 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 02:59:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.309265 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 02:59:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.309265 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 02:59:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.309265 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 02:59:59 WARNING WAPP=1+2+3+4-start_spectra: WARNING observing when not on source 2008-Aug-10 03:00:01 NOTE WAPP=1+2+3+4-start_spectra: Observing now on source 2008-Aug-10 03:19:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-10 03:19:58 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-10 03:19:58 LOG5 end_task: Level: (4) ID = <10419> Status = 0 0 0 0 ok 2008-Aug-10 03:19:58 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-10 03:19:58 LOG5 end_task: Level: (3) ID = <10418> Status = 0 0 0 0 ok 2008-Aug-10 03:19:58 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Aug-10 03:19:58 LOG5 finish_task: Level: (2) ID = <10386> Status = 0 0 0 0 ok 2008-Aug-10 03:19:58 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Aug-10 03:19:58 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Aug-10 03:19:58 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Aug-10 03:19:58 LOG5 end_task: Level: (2) ID = <10386> Status = 0 0 0 0 ok 2008-Aug-10 03:19:58 COMMAND run_command_line: EXECUTING command 47: 'ENDIF' 2008-Aug-10 03:19:58 COMMAND run_command_line: EXECUTING command 50: 'IF LSTSLEW(AGES33PP_p1_080) < 003829 THEN' 2008-Aug-10 03:19:59 ERROR read_source: ERROR source 'AGES33PP_p1_080' does not exist in catalog '/share/obs4/usr/a2048/AGESFull.cat'! 2008-Aug-10 03:19:59 ERROR is_if_valid: ERROR failed to find source 'AGES33PP_p1_080' for function 'LSTSLEW(AGES33PP_p1_080)'! 2008-Aug-10 03:19:59 LOG1 task_failed: Task 'running command file '080810.cmd'' failed! 2008-Aug-10 03:19:59 LOG5 task_failed: Level: (1) ID = <10205> Status = 0 0 0 0 ok 2008-Aug-10 03:19:59 ALERT run_command_file: Stopping command file processing at line 50! 2008-Aug-10 03:19:59 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2008-Aug-10 03:19:59 STOP finish_task: Finishing task 'running command file '080810.cmd'' 2008-Aug-10 03:19:59 LOG5 finish_task: Level: (1) ID = <10205> Status = 0 0 0 1 failed 2008-Aug-10 03:19:59 ERROR finish_task: ERROR failed running: command file '080810.cmd' 2008-Aug-10 03:19:59 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2008-Aug-10 03:19:59 END end_task: Finishing task 'running command file '080810.cmd'' with status 'FAILED' 2008-Aug-10 03:19:59 LOG5 end_task: Level: (1) ID = <10205> Status = 0 0 0 1 failed 2008-Aug-10 03:21:45 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-Aug-10 03:21:45 LOG4 exec_msg: From OBSERVER: run_command_file 080810.cmd 50 1 36 2008-Aug-10 03:21:45 LOG4 run_command_file: Calling 'run_command_file 080810.cmd 50 1 36' 2008-Aug-10 03:21:45 BEGIN begin_task: Starting task 'running command file '080810.cmd'' 2008-Aug-10 03:21:45 LOG5 begin_task: Level: (1) ID = <10420> Status = 0 0 0 0 ok 2008-Aug-10 03:21:45 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '080810.cmd' ...} 2008-Aug-10 03:21:46 NOTE run_command_file: Starting execution of command file '080810.cmd' from line 50 2008-Aug-10 03:21:46 COMMAND run_command_line: EXECUTING command 50: 'IF LSTSLEW(AGES33PP_p1_080) < 003829 THEN' 2008-Aug-10 03:21:46 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES33PP_p1_080) < 003829 2008-Aug-10 03:21:46 INFO5 is_if_valid: Condition parsed as: 0.29187633333333329 < 0.6413888888888889 2008-Aug-10 03:21:46 COMMAND run_command_line: EXECUTING command 51: 'FIXEDDRIFT az=217.93 alfaangle=-19.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p1_080 ra=12400.00 dec=304130.00' 2008-Aug-10 03:21:46 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Aug-10 03:21:47 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Aug-10 03:21:47 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 217.93 -19.3 hcorcal 5 tracking no first 1 AGES33PP_p1_080 12400.00 304130.00 J 8500.0 Heliocentric velocity(optical)' 2008-Aug-10 03:21:47 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Aug-10 03:21:47 LOG5 begin_task: Level: (2) ID = <10421> Status = 0 0 0 0 ok 2008-Aug-10 03:21:47 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES7448_p3_096' 2008-Aug-10 03:21:47 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Aug-10 03:21:47 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES33PP_p1_080} 2008-Aug-10 03:21:47 INFO3 fixed_driftmap: Sending telescope to Az = 217.93 and ZA = 16.19 2008-Aug-10 03:21:47 LOG3 track_source: Calling 'track_source AGES33PP_p1_080 217.93 16.1872329662 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Aug-10 03:21:47 START begin_task: Starting task 'sending tracking commands' 2008-Aug-10 03:21:47 LOG5 begin_task: Level: (3) ID = <10422> Status = 0 0 0 0 ok 2008-Aug-10 03:21:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES33PP_p1_080} INFO {Slewing to source 'AGES33PP_p1_080' ...} 2008-Aug-10 03:21:47 INFO1 track_source: Starting to track AGES33PP_p1_080 2008-Aug-10 03:21:47 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES33PP_p1_080" 2008-Aug-10 03:21:47 LOG3 vw_send: To DATATAKING: set ra 217.93 2008-Aug-10 03:21:47 LOG3 vw_send: To DATATAKING: set dec 16.1872329662 2008-Aug-10 03:21:47 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Aug-10 03:21:47 LOG3 vw_send: To DATATAKING: pnt tr 217.93 16.1872329662 -CF 2008-Aug-10 03:21:47 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Aug-10 03:21:47 STOP finish_task: Finishing task 'sending tracking commands' 2008-Aug-10 03:21:47 LOG5 finish_task: Level: (3) ID = <10422> Status = 0 0 0 0 ok 2008-Aug-10 03:21:47 INFO2 finish_task: DONE finished sending: tracking commands 2008-Aug-10 03:21:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 03:21:47 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Aug-10 03:21:47 LOG5 end_task: Level: (3) ID = <10422> Status = 0 0 0 0 ok 2008-Aug-10 03:21:47 START begin_task: Starting task 'rotate ALFA to -19.3 degrees' 2008-Aug-10 03:21:47 LOG5 begin_task: Level: (3) ID = <10423> Status = 0 0 0 0 ok 2008-Aug-10 03:21:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -19.3 degrees ...} 2008-Aug-10 03:21:47 INFO2 rotate_alfa: ALFA commanded to -19.3 degrees 2008-Aug-10 03:21:47 LOG3 sock_errsend: To ALFAMOTOR: POSITION -19.3 REPLY 2008-Aug-10 03:21:47 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Aug-10 03:21:47 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Aug-10 03:21:47 LOG5 begin_task: Level: (4) ID = <10424> Status = 0 0 0 0 ok 2008-Aug-10 03:21:47 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES33PP_p1_080" 2008-Aug-10 03:21:47 LOG4 got_cormsg: From DATATAKING: set ra 217.93 2008-Aug-10 03:21:47 LOG4 got_cormsg: From DATATAKING: set dec 16.1872329662 2008-Aug-10 03:21:47 LOG4 got_cormsg: From DATATAKING: vw% 217.93 2008-Aug-10 03:21:47 LOG4 got_cormsg: From DATATAKING: vw% 16.1872329662 2008-Aug-10 03:21:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 03:21:47 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Aug-10 03:21:47 LOG4 got_cormsg: From DATATAKING: pnt tr 217.93 16.1872329662 -CF 2008-Aug-10 03:21:47 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Aug-10 03:21:47 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Aug-10 03:21:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 03:22:09 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Aug-10 03:22:09 INFO3 alfa_motor: ALFA rotator in-position -19.30 degrees 2008-Aug-10 03:22:09 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Aug-10 03:22:09 LOG5 end_task: Level: (4) ID = <10424> Status = 0 0 0 0 ok 2008-Aug-10 03:22:09 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Aug-10 03:22:09 STOP finish_task: Finishing task 'rotate ALFA to -19.3 degrees' 2008-Aug-10 03:22:09 LOG5 finish_task: Level: (3) ID = <10423> Status = 0 0 0 0 ok 2008-Aug-10 03:22:09 INFO2 finish_task: DONE finished configuration: rotating ALFA to -19.3 degrees 2008-Aug-10 03:22:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 03:22:09 STOP end_task: Finishing task 'rotate ALFA to -19.3 degrees' with status 'OK' 2008-Aug-10 03:22:09 LOG5 end_task: Level: (3) ID = <10423> Status = 0 0 0 0 ok 2008-Aug-10 03:22:09 START begin_task: Starting task 'waiting on telescope' 2008-Aug-10 03:22:09 LOG5 begin_task: Level: (3) ID = <10425> Status = 0 0 0 0 ok 2008-Aug-10 03:22:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Aug-10 03:22:09 LOG3 waittrk: Start waittrk 5 2008-Aug-10 03:22:09 START begin_task: Starting task 'waiting on telescope movement' 2008-Aug-10 03:22:09 LOG5 begin_task: Level: (4) ID = <10426> Status = 0 0 0 0 ok 2008-Aug-10 03:22:14 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Aug-10 03:22:14 LOG5 end_task: Level: (4) ID = <10426> Status = 0 0 0 0 ok 2008-Aug-10 03:22:14 START begin_task: Starting task 'waiting on telescope on source' 2008-Aug-10 03:22:14 LOG5 begin_task: Level: (4) ID = <10427> Status = 0 0 0 0 ok 2008-Aug-10 03:27:30 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Aug-10 03:27:30 LOG5 end_task: Level: (4) ID = <10427> Status = 0 0 0 0 ok 2008-Aug-10 03:27:30 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Aug-10 03:27:30 INFO2 waittrk: Now tracking AGES33PP_p1_080 2008-Aug-10 03:27:30 LOG4 waittrk: Current telescope position: Az = 577.55 ZA = 16.22 2008-Aug-10 03:27:30 STOP finish_task: Finishing task 'waiting on telescope' 2008-Aug-10 03:27:30 LOG5 finish_task: Level: (3) ID = <10425> Status = 0 0 0 0 ok 2008-Aug-10 03:27:30 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Aug-10 03:27:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 03:27:30 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Aug-10 03:27:30 LOG5 end_task: Level: (3) ID = <10425> Status = 0 0 0 0 ok 2008-Aug-10 03:27:30 START begin_task: Starting task 'selecting calibration type' 2008-Aug-10 03:27:30 LOG5 begin_task: Level: (3) ID = <10428> Status = 0 0 0 0 ok 2008-Aug-10 03:27:30 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Aug-10 03:27:30 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Aug-10 03:27:30 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 03:27:30 START begin_task: Starting task 'waiting on setcal' 2008-Aug-10 03:27:30 LOG5 begin_task: Level: (4) ID = <10429> Status = 0 0 0 0 ok 2008-Aug-10 03:27:30 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Aug-10 03:27:30 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 03:27:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 03:27:32 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-10 03:27:32 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Aug-10 03:27:32 LOG5 end_task: Level: (4) ID = <10429> Status = 0 0 0 0 ok 2008-Aug-10 03:27:32 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Aug-10 03:27:32 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-10 03:27:32 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Aug-10 03:27:32 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-10 03:27:32 LOG5 begin_task: Level: (4) ID = <10430> Status = 0 0 0 0 ok 2008-Aug-10 03:27:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 03:27:32 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-10 03:27:32 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-10 03:27:32 LOG5 end_task: Level: (4) ID = <10430> Status = 0 0 0 0 ok 2008-Aug-10 03:27:32 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-10 03:27:32 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Aug-10 03:27:32 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-10 03:27:32 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Aug-10 03:27:32 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-10 03:27:32 LOG5 begin_task: Level: (4) ID = <10431> Status = 0 0 0 0 ok 2008-Aug-10 03:27:32 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-10 03:27:32 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-10 03:27:32 LOG5 end_task: Level: (4) ID = <10431> Status = 0 0 0 0 ok 2008-Aug-10 03:27:32 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-10 03:27:32 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Aug-10 03:27:32 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Aug-10 03:27:32 LOG5 end_task: Level: (3) ID = <10428> Status = 0 0 0 0 ok 2008-Aug-10 03:27:32 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2008-Aug-10 03:27:32 INFO2 astwait: Waiting for 1220 seconds from 07:27:32 to 07:47:52 UTC ... 2008-Aug-10 03:27:32 LOG4 send_obs_status: To obs_status: <1> TASKTIME 1220 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Aug-10 03:27:32 START begin_task: Starting task 'waiting on waiting for AST time' 2008-Aug-10 03:27:32 LOG5 begin_task: Level: (3) ID = <10432> Status = 0 0 0 0 ok 2008-Aug-10 03:47:52 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2008-Aug-10 03:47:52 LOG5 end_task: Level: (3) ID = <10432> Status = 0 0 0 0 ok 2008-Aug-10 03:47:52 INFO3 astwait: Finished waiting 2008-Aug-10 03:47:52 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Aug-10 03:47:52 LOG5 dopset_later: Calling 'dopset_later 60.905156225236723' 2008-Aug-10 03:47:52 INFO3 dopset_later: Setting Doppler correction for 03:48:52 (60.9 seconds from now) 2008-Aug-10 03:47:52 LOG5 antvel: Calling 'antvel 217.930000 16.187233 F 60.905156225236723' 2008-Aug-10 03:47:52 LOG2 antvel: Transforming current Az = 217.93 ZA = 16.19 to apparent RA = 01:24:30.0 Dec = +30:44:14.6 2008-Aug-10 03:47:52 LOG2 antvel: Parameters to Doppler: Heliocentric 28132 2008 223 0.0 2008-Aug-10 03:47:52 INFO5 antvel: Computed antenna velocity: -26.39021 km/s 2008-Aug-10 03:47:52 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-26.390210052800001 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Aug-10 03:47:52 INFO4 dopset_gen: New sky frequencies: 1381.365028 1381.365028 1381.365028 1381.365028 1381.365028 1381.365028 1381.365028 1381.365028 1381.365028 2008-Aug-10 03:47:52 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.365028 sky0=1381.365028 sky1=1381.365028 sky2=1381.365028 sky3=1381.365028 sky4=1381.365028 sky5=1381.365028 sky6=1381.365028 sky7=1381.365028 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-10 03:47:52 LOG2 dopset_gen: Result from 'sky2syn': 1631.365028 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-10 03:47:52 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631365028.0} 2008-Aug-10 03:47:52 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 03:47:52 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Aug-10 03:47:52 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Aug-10 03:47:52 INFO5 fixed_driftmap: Tracking J2000 position: RA = 01:23:03.2 Dec = +30:41:33.3 2008-Aug-10 03:47:52 LOG3 track_source: Calling 'track_source AGES33PP_p1_080 012303.2 304133.3 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Aug-10 03:47:52 START begin_task: Starting task 'sending tracking commands' 2008-Aug-10 03:47:52 LOG5 begin_task: Level: (3) ID = <10433> Status = 0 0 0 0 ok 2008-Aug-10 03:47:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES33PP_p1_080} INFO {Slewing to source 'AGES33PP_p1_080' ...} 2008-Aug-10 03:47:52 INFO1 track_source: Starting to track AGES33PP_p1_080 2008-Aug-10 03:47:52 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES33PP_p1_080" 2008-Aug-10 03:47:52 LOG3 vw_send: To DATATAKING: set ra 012303.2 2008-Aug-10 03:47:52 LOG3 vw_send: To DATATAKING: set dec 304133.3 2008-Aug-10 03:47:52 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Aug-10 03:47:52 LOG3 vw_send: To DATATAKING: pnt tr 012303.2 304133.3 -CJ 2008-Aug-10 03:47:52 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Aug-10 03:47:52 STOP finish_task: Finishing task 'sending tracking commands' 2008-Aug-10 03:47:52 LOG5 finish_task: Level: (3) ID = <10433> Status = 0 0 0 0 ok 2008-Aug-10 03:47:52 INFO2 finish_task: DONE finished sending: tracking commands 2008-Aug-10 03:47:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 03:47:52 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Aug-10 03:47:52 LOG5 end_task: Level: (3) ID = <10433> Status = 0 0 0 0 ok 2008-Aug-10 03:47:52 START begin_task: Starting task 'waiting on telescope' 2008-Aug-10 03:47:52 LOG5 begin_task: Level: (3) ID = <10434> Status = 0 0 0 0 ok 2008-Aug-10 03:47:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Aug-10 03:47:52 LOG3 waittrk: Start waittrk 5 2008-Aug-10 03:47:52 START begin_task: Starting task 'waiting on telescope movement' 2008-Aug-10 03:47:52 LOG5 begin_task: Level: (4) ID = <10435> Status = 0 0 0 0 ok 2008-Aug-10 03:47:52 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631365028.0} 2008-Aug-10 03:47:52 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 03:47:52 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES33PP_p1_080" 2008-Aug-10 03:47:52 LOG4 got_cormsg: From DATATAKING: set ra 012303.2 2008-Aug-10 03:47:52 LOG4 got_cormsg: From DATATAKING: set dec 304133.3 2008-Aug-10 03:47:52 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Aug-10 03:47:52 LOG4 got_cormsg: From DATATAKING: pnt tr 012303.2 304133.3 -CJ 2008-Aug-10 03:47:52 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Aug-10 03:47:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 03:47:54 LOG4 got_cormsg: From DATATAKING: vw% vw% 012303.2 2008-Aug-10 03:47:54 LOG4 got_cormsg: From DATATAKING: vw% 304133.3 2008-Aug-10 03:47:54 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2008-Aug-10 03:47:57 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Aug-10 03:47:57 LOG5 end_task: Level: (4) ID = <10435> Status = 0 0 0 0 ok 2008-Aug-10 03:47:57 START begin_task: Starting task 'waiting on telescope on source' 2008-Aug-10 03:47:57 LOG5 begin_task: Level: (4) ID = <10436> Status = 0 0 0 0 ok 2008-Aug-10 03:47:57 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Aug-10 03:47:57 LOG5 end_task: Level: (4) ID = <10436> Status = 0 0 0 0 ok 2008-Aug-10 03:47:57 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Aug-10 03:47:57 INFO2 waittrk: Now tracking AGES33PP_p1_080 2008-Aug-10 03:47:57 LOG4 waittrk: Current telescope position: Az = 577.53 ZA = 16.21 2008-Aug-10 03:47:57 STOP finish_task: Finishing task 'waiting on telescope' 2008-Aug-10 03:47:57 LOG5 finish_task: Level: (3) ID = <10434> Status = 0 0 0 0 ok 2008-Aug-10 03:47:57 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Aug-10 03:47:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 03:47:57 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Aug-10 03:47:57 LOG5 end_task: Level: (3) ID = <10434> Status = 0 0 0 0 ok 2008-Aug-10 03:47:57 START begin_task: Starting task 'adjusting WAPP power' 2008-Aug-10 03:47:57 LOG5 begin_task: Level: (3) ID = <10437> Status = 0 0 0 0 ok 2008-Aug-10 03:47:57 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Aug-10 03:47:57 INFO2 adjust_power: Starting to adjust WAPP power 2008-Aug-10 03:47:57 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Aug-10 03:47:57 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Aug-10 03:47:57 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 03:47:57 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Aug-10 03:47:57 LOG5 begin_task: Level: (4) ID = <10438> Status = 0 0 0 0 ok 2008-Aug-10 03:47:58 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Aug-10 03:47:58 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 03:48:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 03:48:00 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-10 03:48:00 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Aug-10 03:48:00 LOG5 end_task: Level: (4) ID = <10438> Status = 0 0 0 0 ok 2008-Aug-10 03:48:00 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Aug-10 03:48:00 START begin_task: Starting task 'adjusting WAPP power' 2008-Aug-10 03:48:00 LOG5 begin_task: Level: (4) ID = <10439> Status = 0 0 0 0 ok 2008-Aug-10 03:48:00 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Aug-10 03:48:00 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Aug-10 03:48:00 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Aug-10 03:48:00 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Aug-10 03:48:01 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Aug-10 03:48:01 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Aug-10 03:48:01 LOG5 begin_task: Level: (5) ID = <10440> Status = 0 0 0 0 ok 2008-Aug-10 03:48:01 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Aug-10 03:48:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 03:48:01 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 6 dB 2008-Aug-10 03:48:01 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 5 dB 2008-Aug-10 03:48:01 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Aug-10 03:48:01 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 2 3 dB 2008-Aug-10 03:48:01 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Aug-10 03:48:01 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Aug-10 03:48:01 LOG5 end_task: Level: (5) ID = <10440> Status = 0 0 0 0 ok 2008-Aug-10 03:48:01 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.080 1.088 ALFA beam 1: 1.066 1.009 2008-Aug-10 03:48:01 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.946 0.902 ALFA beam 3: 0.914 1.000 2008-Aug-10 03:48:01 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.943 0.931 ALFA beam 5: 0.894 1.007 2008-Aug-10 03:48:01 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.984 1.054 ALFA beam 7: 1.085 0.933 2008-Aug-10 03:48:01 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Aug-10 03:48:01 LOG5 finish_task: Level: (4) ID = <10439> Status = 0 0 0 0 ok 2008-Aug-10 03:48:01 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Aug-10 03:48:01 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 03:48:01 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Aug-10 03:48:01 LOG5 end_task: Level: (4) ID = <10439> Status = 0 0 0 0 ok 2008-Aug-10 03:48:01 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Aug-10 03:48:01 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Aug-10 03:48:01 LOG5 finish_task: Level: (3) ID = <10437> Status = 0 0 0 0 ok 2008-Aug-10 03:48:01 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Aug-10 03:48:01 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 03:48:01 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Aug-10 03:48:01 LOG5 end_task: Level: (3) ID = <10437> Status = 0 0 0 0 ok 2008-Aug-10 03:48:01 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 RM 2008-Aug-10 03:48:01 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 RM 2008-Aug-10 03:48:01 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 RM 2008-Aug-10 03:48:01 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 RM 2008-Aug-10 03:48:01 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Aug-10 03:48:01 START begin_task: Starting task 'WAPP calibration' 2008-Aug-10 03:48:01 LOG5 begin_task: Level: (3) ID = <10441> Status = 0 0 0 0 ok 2008-Aug-10 03:48:01 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Aug-10 03:48:01 START begin_task: Starting task 'selecting calibration type' 2008-Aug-10 03:48:01 LOG5 begin_task: Level: (4) ID = <10442> Status = 0 0 0 0 ok 2008-Aug-10 03:48:01 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Aug-10 03:48:01 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Aug-10 03:48:01 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 03:48:01 START begin_task: Starting task 'waiting on setcal' 2008-Aug-10 03:48:01 LOG5 begin_task: Level: (5) ID = <10443> Status = 0 0 0 0 ok 2008-Aug-10 03:48:01 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 RM' 2008-Aug-10 03:48:02 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Aug-10 03:48:02 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 03:48:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 03:48:02 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-10 03:48:02 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Aug-10 03:48:02 LOG5 end_task: Level: (5) ID = <10443> Status = 0 0 0 0 ok 2008-Aug-10 03:48:02 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Aug-10 03:48:02 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-10 03:48:02 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Aug-10 03:48:02 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-10 03:48:02 LOG5 begin_task: Level: (5) ID = <10444> Status = 0 0 0 0 ok 2008-Aug-10 03:48:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 03:48:02 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-10 03:48:02 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-10 03:48:02 LOG5 end_task: Level: (5) ID = <10444> Status = 0 0 0 0 ok 2008-Aug-10 03:48:02 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-10 03:48:02 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Aug-10 03:48:02 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-10 03:48:02 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Aug-10 03:48:02 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-10 03:48:02 LOG5 begin_task: Level: (5) ID = <10445> Status = 0 0 0 0 ok 2008-Aug-10 03:48:02 NOTE WAPPDATA-new_file: New FITS file: wapp.20080810.a2048.0009.fits 2008-Aug-10 03:48:02 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-10 03:48:02 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-10 03:48:02 LOG5 end_task: Level: (5) ID = <10445> Status = 0 0 0 0 ok 2008-Aug-10 03:48:02 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-10 03:48:02 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Aug-10 03:48:02 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Aug-10 03:48:02 LOG5 end_task: Level: (4) ID = <10442> Status = 0 0 0 0 ok 2008-Aug-10 03:48:02 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Aug-10 03:48:02 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Aug-10 03:48:02 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Aug-10 03:48:02 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-10 03:48:02 LOG5 begin_task: Level: (4) ID = <10446> Status = 0 0 0 0 ok 2008-Aug-10 03:48:02 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080810.a2048.0009.fits} 2008-Aug-10 03:48:02 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-10 03:48:02 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Aug-10 03:48:02 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-10 03:48:02 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-10 03:48:02 LOG5 end_task: Level: (4) ID = <10446> Status = 0 0 0 0 ok 2008-Aug-10 03:48:02 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Aug-10 03:48:02 LOG4 take_data: Calling 'take_data 5 5 CAL ON -' 2008-Aug-10 03:48:02 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-10 03:48:02 LOG5 begin_task: Level: (4) ID = <10447> Status = 0 0 0 0 ok 2008-Aug-10 03:48:02 LOG5 log_alfabeam: Parameters: 1.3842222222222225 30.692583333333332 0.627798 2008.6109742819478 -19.300034 2008-Aug-10 03:48:02 LOG4 log_alfabeam: ALFABEAM 0 1.384222222222221 30.692583333333342 2008-Aug-10 03:48:02 LOG4 log_alfabeam: ALFABEAM 1 1.384497129138647 30.594564007748588 2008-Aug-10 03:48:02 LOG4 log_alfabeam: ALFABEAM 2 1.390990005520642 30.659753548772986 2008-Aug-10 03:48:02 LOG4 log_alfabeam: ALFABEAM 3 1.390704415694096 30.758076843758133 2008-Aug-10 03:48:02 LOG4 log_alfabeam: ALFABEAM 4 1.383898426045123 30.790782959573122 2008-Aug-10 03:48:02 LOG4 log_alfabeam: ALFABEAM 5 1.377447235093833 30.724756445609689 2008-Aug-10 03:48:02 LOG4 log_alfabeam: ALFABEAM 6 1.377760130759073 30.626859792567103 2008-Aug-10 03:48:02 INFO2 take_data: Starting WAPP scan: 822300071 2008-Aug-10 03:48:03 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Aug-10 03:48:03 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-10 03:48:03 LOG5 begin_task: Level: (5) ID = <10448> Status = 0 0 0 0 ok 2008-Aug-10 03:48:03 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-10 03:48:03 INFO1 WAPP=1+2+3+4-start_spectra: start sec 28084.00 2008-Aug-10 03:48:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.365028 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-10 03:48:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.365028 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 03:48:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.365028 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 03:48:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.365028 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 03:48:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.365028 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 03:48:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.365028 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 03:48:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.365028 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 03:48:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.365028 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 03:48:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.365028 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 03:48:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-10 03:48:09 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-10 03:48:09 LOG5 end_task: Level: (5) ID = <10448> Status = 0 0 0 0 ok 2008-Aug-10 03:48:09 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-10 03:48:09 LOG5 end_task: Level: (4) ID = <10447> Status = 0 0 0 0 ok 2008-Aug-10 03:48:09 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Aug-10 03:48:09 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Aug-10 03:48:09 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Aug-10 03:48:09 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-10 03:48:09 LOG5 begin_task: Level: (4) ID = <10449> Status = 0 0 0 0 ok 2008-Aug-10 03:48:10 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-10 03:48:10 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-10 03:48:10 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-10 03:48:10 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-10 03:48:10 LOG5 end_task: Level: (4) ID = <10449> Status = 0 0 0 0 ok 2008-Aug-10 03:48:10 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Aug-10 03:48:10 LOG4 take_data: Calling 'take_data 5 5 CAL OFF -' 2008-Aug-10 03:48:10 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-10 03:48:10 LOG5 begin_task: Level: (4) ID = <10450> Status = 0 0 0 0 ok 2008-Aug-10 03:48:10 LOG5 log_alfabeam: Parameters: 1.3842222222222225 30.692583333333332 0.629747 2008.6109745037645 -19.300034 2008-Aug-10 03:48:10 LOG4 log_alfabeam: ALFABEAM 0 1.384222222222221 30.692583333333342 2008-Aug-10 03:48:10 LOG4 log_alfabeam: ALFABEAM 1 1.384507537094920 30.594569075574480 2008-Aug-10 03:48:10 LOG4 log_alfabeam: ALFABEAM 2 1.390993499135192 30.659873253653075 2008-Aug-10 03:48:10 LOG4 log_alfabeam: ALFABEAM 3 1.390697435561372 30.758191625593081 2008-Aug-10 03:48:10 LOG4 log_alfabeam: ALFABEAM 4 1.383887923998166 30.790777224194699 2008-Aug-10 03:48:10 LOG4 log_alfabeam: ALFABEAM 5 1.377443814697436 30.724635971560570 2008-Aug-10 03:48:10 LOG4 log_alfabeam: ALFABEAM 6 1.377767146134613 30.626745192138117 2008-Aug-10 03:48:10 INFO2 take_data: Starting WAPP scan: 822300072 2008-Aug-10 03:48:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Aug-10 03:48:10 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-10 03:48:10 LOG5 begin_task: Level: (5) ID = <10451> Status = 0 0 0 0 ok 2008-Aug-10 03:48:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-10 03:48:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 28091.00 2008-Aug-10 03:48:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.365028 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-10 03:48:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.365028 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 03:48:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.365028 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 03:48:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.365028 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 03:48:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.365028 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 03:48:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.365028 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 03:48:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.365028 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 03:48:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.365028 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 03:48:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.365028 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 03:48:16 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Aug-10 03:48:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-10 03:48:16 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-10 03:48:16 LOG5 end_task: Level: (5) ID = <10451> Status = 0 0 0 0 ok 2008-Aug-10 03:48:16 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-10 03:48:16 LOG5 end_task: Level: (4) ID = <10450> Status = 0 0 0 0 ok 2008-Aug-10 03:48:16 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Aug-10 03:48:16 STOP finish_task: Finishing task 'WAPP calibration' 2008-Aug-10 03:48:16 LOG5 finish_task: Level: (3) ID = <10441> Status = 0 0 0 0 ok 2008-Aug-10 03:48:16 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Aug-10 03:48:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 03:48:16 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Aug-10 03:48:16 LOG5 end_task: Level: (3) ID = <10441> Status = 0 0 0 0 ok 2008-Aug-10 03:48:17 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Aug-10 03:48:17 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 217.93 and ZA = 16.19 2008-Aug-10 03:48:17 LOG3 track_source: Calling 'track_source AGES33PP_p1_080 217.93 16.1872329662 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Aug-10 03:48:17 START begin_task: Starting task 'sending tracking commands' 2008-Aug-10 03:48:17 LOG5 begin_task: Level: (3) ID = <10452> Status = 0 0 0 0 ok 2008-Aug-10 03:48:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES33PP_p1_080} INFO {Slewing to source 'AGES33PP_p1_080' ...} 2008-Aug-10 03:48:17 INFO1 track_source: Starting to track AGES33PP_p1_080 2008-Aug-10 03:48:17 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES33PP_p1_080" 2008-Aug-10 03:48:17 LOG3 vw_send: To DATATAKING: set ra 217.93 2008-Aug-10 03:48:17 LOG3 vw_send: To DATATAKING: set dec 16.1872329662 2008-Aug-10 03:48:17 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Aug-10 03:48:17 LOG3 vw_send: To DATATAKING: pnt tr 217.93 16.1872329662 -CF 2008-Aug-10 03:48:17 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Aug-10 03:48:17 STOP finish_task: Finishing task 'sending tracking commands' 2008-Aug-10 03:48:17 LOG5 finish_task: Level: (3) ID = <10452> Status = 0 0 0 0 ok 2008-Aug-10 03:48:17 INFO2 finish_task: DONE finished sending: tracking commands 2008-Aug-10 03:48:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 03:48:17 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Aug-10 03:48:17 LOG5 end_task: Level: (3) ID = <10452> Status = 0 0 0 0 ok 2008-Aug-10 03:48:17 LOG1 fixed_driftmap: Parameters: HA = -00:46:00.1 Start = 00:38:30.1 LST = 00:37:54.1 diff = 36.0 secs 2008-Aug-10 03:48:17 INFO2 fixed_driftmap: Waiting 34 seconds for RA 1:24:30 2008-Aug-10 03:48:17 INFO2 lstwait: Waiting for 33.9 secs from LST 00:37:54 to LST 00:38:28 ... 2008-Aug-10 03:48:17 LOG4 send_obs_status: To obs_status: <1> TASKTIME 33.912259415957024 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Aug-10 03:48:17 START begin_task: Starting task 'waiting on wait on LST' 2008-Aug-10 03:48:17 LOG5 begin_task: Level: (3) ID = <10453> Status = 0 0 0 0 ok 2008-Aug-10 03:48:17 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES33PP_p1_080" 2008-Aug-10 03:48:17 LOG4 got_cormsg: From DATATAKING: set ra 217.93 2008-Aug-10 03:48:17 LOG4 got_cormsg: From DATATAKING: set dec 16.1872329662 2008-Aug-10 03:48:17 LOG4 got_cormsg: From DATATAKING: vw% 217.93 2008-Aug-10 03:48:17 LOG4 got_cormsg: From DATATAKING: vw% 16.1872329662 2008-Aug-10 03:48:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 03:48:17 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Aug-10 03:48:17 LOG4 got_cormsg: From DATATAKING: pnt tr 217.93 16.1872329662 -CF 2008-Aug-10 03:48:17 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Aug-10 03:48:17 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Aug-10 03:48:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 03:48:51 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Aug-10 03:48:51 LOG5 end_task: Level: (3) ID = <10453> Status = 0 0 0 0 ok 2008-Aug-10 03:48:51 LOG4 lstwait: Finished waiting 0.09 seconds late 2008-Aug-10 03:48:51 INFO3 lstwait: Finished waiting 2008-Aug-10 03:48:51 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Aug-10 03:48:51 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Aug-10 03:48:51 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Aug-10 03:48:51 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Aug-10 03:48:51 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Aug-10 03:48:51 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ -' 2008-Aug-10 03:48:51 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-10 03:48:51 LOG5 begin_task: Level: (3) ID = <10454> Status = 0 0 0 0 ok 2008-Aug-10 03:48:51 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-10 03:48:51 INFO2 take_data: Starting WAPP scan: 822300073 2008-Aug-10 03:48:51 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Aug-10 03:48:51 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-10 03:48:51 LOG5 begin_task: Level: (4) ID = <10455> Status = 0 0 0 0 ok 2008-Aug-10 03:48:51 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-10 03:48:51 INFO1 WAPP=1+2+3+4-start_spectra: start sec 28132.00 2008-Aug-10 03:48:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.365028 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-10 03:48:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.365028 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 03:48:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.365028 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 03:48:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.365028 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 03:48:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.365028 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 03:48:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.365028 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 03:48:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.365028 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 03:48:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.365028 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 03:48:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.365028 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 04:00:04 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:00:05 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:00:06 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:00:07 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:00:08 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:00:09 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:00:10 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:00:11 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:00:12 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:00:13 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:00:14 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:00:15 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:00:16 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:00:17 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:00:18 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:00:19 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:00:20 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:00:21 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:00:22 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:00:23 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:00:24 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:00:25 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:00:26 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:00:27 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:00:28 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:00:29 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:00:30 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:00:31 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:00:32 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:00:33 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:00:34 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:00:35 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:00:36 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:00:37 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:00:38 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:00:39 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:00:40 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:00:41 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:00:42 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:00:43 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:00:44 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:00:45 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:00:46 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:00:47 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:00:48 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:00:49 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:00:50 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:00:51 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:00:52 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:00:53 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:00:54 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:00:55 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:00:56 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:00:57 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:00:58 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:00:59 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:01:00 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:01:01 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:01:02 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:01:03 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:01:04 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:01:05 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:01:06 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:01:07 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:01:08 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:01:09 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:01:10 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:01:11 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:01:12 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:01:13 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:01:14 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:01:15 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:01:16 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:01:17 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:01:18 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:01:19 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:01:20 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:01:21 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:01:22 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:01:23 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:01:24 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:01:25 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:01:26 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:01:27 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:01:28 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:01:29 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:01:30 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:01:31 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:01:32 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:01:33 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:01:34 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:01:35 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:01:36 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:01:37 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:01:38 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:01:39 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:01:40 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:01:41 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:01:42 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:01:43 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:01:44 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:01:45 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:01:46 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:01:47 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:01:48 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:01:49 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:01:50 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:01:51 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:01:52 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:01:53 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:01:54 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:01:55 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:01:56 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:01:57 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:01:58 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:01:59 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:02:00 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:02:01 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:02:02 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:02:03 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:02:04 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:02:05 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:02:06 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:02:07 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:02:08 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:02:09 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:02:10 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:02:11 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:02:12 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:02:13 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:02:14 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:02:15 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:02:16 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:02:17 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:02:18 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:02:19 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:02:20 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:02:21 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:02:22 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:02:23 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:02:24 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:02:25 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:02:26 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:02:27 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:02:28 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:02:29 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:02:30 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:02:31 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:02:32 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:02:33 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:02:34 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:02:35 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:02:36 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:02:37 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:02:38 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:02:39 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:02:40 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:02:41 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:02:42 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:02:43 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:02:44 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:02:45 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:02:46 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:02:47 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:02:48 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:02:49 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:02:50 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:02:51 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:02:52 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:02:53 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:02:54 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:02:55 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:02:56 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:02:57 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:02:58 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:02:59 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:03:00 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:03:01 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:03:02 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:03:03 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:03:04 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:03:05 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:03:06 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:03:07 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:03:08 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:03:09 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:03:10 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:03:11 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:03:12 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:03:13 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:03:14 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:03:15 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:03:16 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:03:17 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:03:18 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:03:19 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:03:20 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:03:21 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:03:22 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:03:23 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:03:24 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:03:25 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:03:26 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:03:27 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:03:28 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:03:29 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:03:30 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:03:31 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:03:32 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:03:33 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:03:34 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:03:35 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:03:36 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:03:37 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:03:38 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:03:39 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:03:40 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:03:41 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:03:42 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:03:43 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:03:44 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:03:45 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:03:46 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:03:47 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:03:48 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:03:49 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:03:50 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:03:51 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:03:52 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:03:53 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:03:54 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:03:55 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:03:56 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:03:57 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:03:58 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:03:59 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:04:00 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:04:01 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:04:02 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:04:03 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:04:04 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:04:05 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:04:06 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:04:07 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:04:08 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:04:09 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:04:10 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:04:11 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:04:12 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:04:13 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:04:14 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:04:15 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:04:16 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:04:17 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:04:18 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:04:19 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:04:20 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:04:21 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:04:22 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:04:23 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:04:24 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:04:25 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:04:26 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:04:27 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:04:28 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:04:29 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:04:30 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:04:31 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:04:32 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:04:33 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:04:34 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:04:35 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:04:36 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:04:37 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:04:38 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:04:39 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:04:40 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:04:41 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:04:42 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:04:43 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:04:44 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:04:45 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:04:46 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:04:47 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:04:48 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:04:49 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:04:50 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:04:51 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:04:52 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:04:53 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:04:54 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:04:55 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:04:56 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:04:57 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:04:58 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:04:59 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:05:00 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:05:01 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:05:02 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:05:03 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:05:04 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:05:05 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:05:06 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:05:07 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:05:08 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:05:09 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:05:10 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:05:11 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:05:12 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:05:13 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:05:14 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:05:15 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:05:16 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:05:17 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:05:18 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:05:19 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:05:20 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:05:21 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:05:22 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:05:23 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:05:24 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:05:25 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:05:26 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:05:27 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:05:28 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:05:29 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:05:30 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:05:31 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:05:32 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:05:33 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:05:34 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:05:35 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:05:36 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:05:37 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:05:38 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:05:39 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:05:40 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:05:41 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:05:42 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:05:43 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:05:44 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:05:45 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:05:46 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:05:47 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:05:48 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:05:49 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:05:50 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:05:51 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:05:52 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:05:53 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:05:54 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:05:55 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:05:56 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:05:57 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:05:58 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:05:59 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:06:00 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:06:01 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:06:02 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:06:03 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:06:04 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:06:05 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:06:06 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:06:07 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:06:08 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:06:09 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:06:10 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:06:11 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:06:12 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:06:13 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:06:14 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:06:15 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:06:16 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:06:17 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:06:18 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:06:19 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:06:20 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:06:21 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:06:22 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:06:23 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:06:24 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:06:25 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:06:26 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:06:27 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:06:28 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:06:29 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:06:30 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:06:31 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:06:32 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:06:33 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:06:34 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:06:35 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:06:36 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:06:37 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:06:38 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:06:39 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:06:40 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:06:41 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:06:42 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:06:43 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:06:44 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:06:45 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:06:46 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:06:47 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:06:48 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:06:49 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:06:50 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:06:51 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:06:52 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:06:53 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:06:54 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:06:55 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:06:56 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:06:57 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:06:58 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:06:59 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:07:00 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:07:01 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:07:02 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:07:03 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:07:04 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:07:05 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:07:06 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:07:07 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:07:08 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:07:09 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:07:10 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:07:11 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:07:12 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:07:13 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:07:14 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:07:15 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:07:16 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:07:17 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:07:18 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:07:19 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:07:20 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:07:21 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:07:22 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:07:23 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:07:24 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:07:25 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:07:26 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:07:27 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:07:28 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:07:29 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:07:30 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:07:31 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:07:32 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:07:33 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:07:34 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:07:35 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:07:36 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:07:37 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:07:38 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:07:39 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:07:40 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:07:41 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:07:42 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:07:43 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:07:44 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:07:45 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:07:46 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:07:47 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:07:48 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:07:49 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:07:50 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:07:51 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:07:52 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:07:53 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:07:54 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:07:55 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:07:56 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:07:57 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:07:58 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:07:59 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:08:00 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:08:01 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:08:02 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:08:03 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:08:04 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:08:05 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:08:06 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:08:07 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:08:08 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:08:09 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:08:10 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:08:11 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:08:12 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:08:13 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:08:14 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:08:15 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:08:16 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:08:17 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:08:18 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:08:19 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:08:20 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:08:21 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:08:22 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:08:23 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:08:24 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:08:25 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:08:26 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:08:27 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:08:28 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:08:29 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:08:30 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:08:31 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:08:32 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:08:33 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:08:34 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:08:35 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:08:36 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:08:37 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:08:38 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:08:39 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:08:40 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:08:41 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:08:42 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:08:43 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:08:44 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:08:45 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:08:46 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:08:47 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:08:48 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:08:49 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:08:50 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:08:51 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:08:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-10 04:08:52 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-10 04:08:52 LOG5 end_task: Level: (4) ID = <10455> Status = 0 0 0 0 ok 2008-Aug-10 04:08:52 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-10 04:08:52 LOG5 end_task: Level: (3) ID = <10454> Status = 0 0 0 0 ok 2008-Aug-10 04:08:52 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Aug-10 04:08:52 LOG5 finish_task: Level: (2) ID = <10421> Status = 0 0 0 0 ok 2008-Aug-10 04:08:52 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Aug-10 04:08:52 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Aug-10 04:08:52 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Aug-10 04:08:52 LOG5 end_task: Level: (2) ID = <10421> Status = 0 0 0 0 ok 2008-Aug-10 04:08:52 COMMAND run_command_line: EXECUTING command 54: 'ENDIF' 2008-Aug-10 04:08:52 COMMAND run_command_line: EXECUTING command 57: 'IF LSTSLEW(AGES33PP_p1_082) < 010129 THEN' 2008-Aug-10 04:08:53 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES33PP_p1_082) < 010129 2008-Aug-10 04:08:53 INFO5 is_if_valid: Condition parsed as: 0.99430333333333332 < 1.0247222222222221 2008-Aug-10 04:08:53 COMMAND run_command_line: EXECUTING command 58: 'FIXEDDRIFT az=201.84 alfaangle=-2.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p1_082 ra=12400.00 dec=303830.00' 2008-Aug-10 04:08:53 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Aug-10 04:08:53 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:08:53 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Aug-10 04:08:53 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 201.84 -2.0 hcorcal 5 tracking no first 1 AGES33PP_p1_082 12400.00 303830.00 J 8500.0 Heliocentric velocity(optical)' 2008-Aug-10 04:08:53 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Aug-10 04:08:53 LOG5 begin_task: Level: (2) ID = <10456> Status = 0 0 0 0 ok 2008-Aug-10 04:08:53 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES33PP_p1_080' 2008-Aug-10 04:08:54 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Aug-10 04:08:54 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES33PP_p1_082} 2008-Aug-10 04:08:54 INFO3 fixed_driftmap: Sending telescope to Az = 201.84 and ZA = 13.39 2008-Aug-10 04:08:54 LOG3 track_source: Calling 'track_source AGES33PP_p1_082 201.84 13.3905350316 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Aug-10 04:08:54 START begin_task: Starting task 'sending tracking commands' 2008-Aug-10 04:08:54 LOG5 begin_task: Level: (3) ID = <10457> Status = 0 0 0 0 ok 2008-Aug-10 04:08:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES33PP_p1_082} INFO {Slewing to source 'AGES33PP_p1_082' ...} 2008-Aug-10 04:08:54 INFO1 track_source: Starting to track AGES33PP_p1_082 2008-Aug-10 04:08:54 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES33PP_p1_082" 2008-Aug-10 04:08:54 LOG3 vw_send: To DATATAKING: set ra 201.84 2008-Aug-10 04:08:54 LOG3 vw_send: To DATATAKING: set dec 13.3905350316 2008-Aug-10 04:08:54 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Aug-10 04:08:54 LOG3 vw_send: To DATATAKING: pnt tr 201.84 13.3905350316 -CF 2008-Aug-10 04:08:54 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Aug-10 04:08:54 STOP finish_task: Finishing task 'sending tracking commands' 2008-Aug-10 04:08:54 LOG5 finish_task: Level: (3) ID = <10457> Status = 0 0 0 0 ok 2008-Aug-10 04:08:54 INFO2 finish_task: DONE finished sending: tracking commands 2008-Aug-10 04:08:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 04:08:54 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Aug-10 04:08:54 LOG5 end_task: Level: (3) ID = <10457> Status = 0 0 0 0 ok 2008-Aug-10 04:08:54 START begin_task: Starting task 'rotate ALFA to -2 degrees' 2008-Aug-10 04:08:54 LOG5 begin_task: Level: (3) ID = <10458> Status = 0 0 0 0 ok 2008-Aug-10 04:08:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -2 degrees ...} 2008-Aug-10 04:08:54 INFO2 rotate_alfa: ALFA commanded to -2.0 degrees 2008-Aug-10 04:08:54 LOG3 sock_errsend: To ALFAMOTOR: POSITION -2.0 REPLY 2008-Aug-10 04:08:54 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Aug-10 04:08:54 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Aug-10 04:08:54 LOG5 begin_task: Level: (4) ID = <10459> Status = 0 0 0 0 ok 2008-Aug-10 04:08:54 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES33PP_p1_082" 2008-Aug-10 04:08:54 LOG4 got_cormsg: From DATATAKING: set ra 201.84 2008-Aug-10 04:08:54 LOG4 got_cormsg: From DATATAKING: set dec 13.3905350316 2008-Aug-10 04:08:54 LOG4 got_cormsg: From DATATAKING: vw% 201.84 2008-Aug-10 04:08:54 LOG4 got_cormsg: From DATATAKING: vw% 13.3905350316 2008-Aug-10 04:08:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 04:08:54 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Aug-10 04:08:54 LOG4 got_cormsg: From DATATAKING: pnt tr 201.84 13.3905350316 -CF 2008-Aug-10 04:08:54 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Aug-10 04:08:54 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Aug-10 04:08:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 04:09:04 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Aug-10 04:09:04 INFO3 alfa_motor: ALFA rotator in-position -2.00 degrees 2008-Aug-10 04:09:04 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Aug-10 04:09:04 LOG5 end_task: Level: (4) ID = <10459> Status = 0 0 0 0 ok 2008-Aug-10 04:09:04 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Aug-10 04:09:04 STOP finish_task: Finishing task 'rotate ALFA to -2 degrees' 2008-Aug-10 04:09:04 LOG5 finish_task: Level: (3) ID = <10458> Status = 0 0 0 0 ok 2008-Aug-10 04:09:04 INFO2 finish_task: DONE finished configuration: rotating ALFA to -2 degrees 2008-Aug-10 04:09:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 04:09:05 STOP end_task: Finishing task 'rotate ALFA to -2 degrees' with status 'OK' 2008-Aug-10 04:09:05 LOG5 end_task: Level: (3) ID = <10458> Status = 0 0 0 0 ok 2008-Aug-10 04:09:05 START begin_task: Starting task 'waiting on telescope' 2008-Aug-10 04:09:05 LOG5 begin_task: Level: (3) ID = <10460> Status = 0 0 0 0 ok 2008-Aug-10 04:09:05 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Aug-10 04:09:05 LOG3 waittrk: Start waittrk 5 2008-Aug-10 04:09:05 START begin_task: Starting task 'waiting on telescope movement' 2008-Aug-10 04:09:05 LOG5 begin_task: Level: (4) ID = <10461> Status = 0 0 0 0 ok 2008-Aug-10 04:09:10 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Aug-10 04:09:10 LOG5 end_task: Level: (4) ID = <10461> Status = 0 0 0 0 ok 2008-Aug-10 04:09:10 START begin_task: Starting task 'waiting on telescope on source' 2008-Aug-10 04:09:10 LOG5 begin_task: Level: (4) ID = <10462> Status = 0 0 0 0 ok 2008-Aug-10 04:10:11 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Aug-10 04:10:11 LOG5 end_task: Level: (4) ID = <10462> Status = 0 0 0 0 ok 2008-Aug-10 04:10:11 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Aug-10 04:10:11 INFO2 waittrk: Now tracking AGES33PP_p1_082 2008-Aug-10 04:10:11 LOG4 waittrk: Current telescope position: Az = 561.49 ZA = 13.42 2008-Aug-10 04:10:11 STOP finish_task: Finishing task 'waiting on telescope' 2008-Aug-10 04:10:11 LOG5 finish_task: Level: (3) ID = <10460> Status = 0 0 0 0 ok 2008-Aug-10 04:10:11 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Aug-10 04:10:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 04:10:11 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Aug-10 04:10:11 LOG5 end_task: Level: (3) ID = <10460> Status = 0 0 0 0 ok 2008-Aug-10 04:10:11 START begin_task: Starting task 'selecting calibration type' 2008-Aug-10 04:10:11 LOG5 begin_task: Level: (3) ID = <10463> Status = 0 0 0 0 ok 2008-Aug-10 04:10:11 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Aug-10 04:10:11 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Aug-10 04:10:12 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 04:10:12 START begin_task: Starting task 'waiting on setcal' 2008-Aug-10 04:10:12 LOG5 begin_task: Level: (4) ID = <10464> Status = 0 0 0 0 ok 2008-Aug-10 04:10:12 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Aug-10 04:10:12 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 04:10:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 04:10:13 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-10 04:10:13 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Aug-10 04:10:13 LOG5 end_task: Level: (4) ID = <10464> Status = 0 0 0 0 ok 2008-Aug-10 04:10:13 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Aug-10 04:10:13 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-10 04:10:13 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Aug-10 04:10:13 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-10 04:10:13 LOG5 begin_task: Level: (4) ID = <10465> Status = 0 0 0 0 ok 2008-Aug-10 04:10:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 04:10:13 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-10 04:10:13 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-10 04:10:13 LOG5 end_task: Level: (4) ID = <10465> Status = 0 0 0 0 ok 2008-Aug-10 04:10:13 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-10 04:10:13 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Aug-10 04:10:13 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-10 04:10:13 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Aug-10 04:10:13 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-10 04:10:13 LOG5 begin_task: Level: (4) ID = <10466> Status = 0 0 0 0 ok 2008-Aug-10 04:10:13 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-10 04:10:13 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-10 04:10:13 LOG5 end_task: Level: (4) ID = <10466> Status = 0 0 0 0 ok 2008-Aug-10 04:10:13 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-10 04:10:13 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Aug-10 04:10:13 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Aug-10 04:10:13 LOG5 end_task: Level: (3) ID = <10463> Status = 0 0 0 0 ok 2008-Aug-10 04:10:13 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2008-Aug-10 04:10:13 INFO2 astwait: Waiting for 35 seconds from 08:10:13 to 08:10:48 UTC ... 2008-Aug-10 04:10:13 LOG4 send_obs_status: To obs_status: <1> TASKTIME 35 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Aug-10 04:10:13 START begin_task: Starting task 'waiting on waiting for AST time' 2008-Aug-10 04:10:13 LOG5 begin_task: Level: (3) ID = <10467> Status = 0 0 0 0 ok 2008-Aug-10 04:10:48 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2008-Aug-10 04:10:48 LOG5 end_task: Level: (3) ID = <10467> Status = 0 0 0 0 ok 2008-Aug-10 04:10:48 INFO3 astwait: Finished waiting 2008-Aug-10 04:10:48 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Aug-10 04:10:48 LOG5 dopset_later: Calling 'dopset_later 61.254622350495268' 2008-Aug-10 04:10:48 INFO3 dopset_later: Setting Doppler correction for 04:11:48 (61.3 seconds from now) 2008-Aug-10 04:10:48 LOG5 antvel: Calling 'antvel 201.840000 13.390535 F 61.254622350495268' 2008-Aug-10 04:10:48 LOG2 antvel: Transforming current Az = 201.84 ZA = 13.39 to apparent RA = 01:24:30.0 Dec = +30:41:14.6 2008-Aug-10 04:10:48 LOG2 antvel: Parameters to Doppler: Heliocentric 29508 2008 223 0.0 2008-Aug-10 04:10:48 INFO5 antvel: Computed antenna velocity: -26.35514 km/s 2008-Aug-10 04:10:48 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-26.355137640799999 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Aug-10 04:10:48 INFO4 dopset_gen: New sky frequencies: 1381.364866 1381.364866 1381.364866 1381.364866 1381.364866 1381.364866 1381.364866 1381.364866 1381.364866 2008-Aug-10 04:10:48 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.364866 sky0=1381.364866 sky1=1381.364866 sky2=1381.364866 sky3=1381.364866 sky4=1381.364866 sky5=1381.364866 sky6=1381.364866 sky7=1381.364866 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-10 04:10:48 LOG2 dopset_gen: Result from 'sky2syn': 1631.364866 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-10 04:10:48 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631364866.0} 2008-Aug-10 04:10:48 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 04:10:48 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Aug-10 04:10:48 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Aug-10 04:10:48 INFO5 fixed_driftmap: Tracking J2000 position: RA = 01:23:02.8 Dec = +30:38:33.3 2008-Aug-10 04:10:48 LOG3 track_source: Calling 'track_source AGES33PP_p1_082 012302.8 303833.3 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Aug-10 04:10:48 START begin_task: Starting task 'sending tracking commands' 2008-Aug-10 04:10:48 LOG5 begin_task: Level: (3) ID = <10468> Status = 0 0 0 0 ok 2008-Aug-10 04:10:48 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES33PP_p1_082} INFO {Slewing to source 'AGES33PP_p1_082' ...} 2008-Aug-10 04:10:48 INFO1 track_source: Starting to track AGES33PP_p1_082 2008-Aug-10 04:10:48 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES33PP_p1_082" 2008-Aug-10 04:10:48 LOG3 vw_send: To DATATAKING: set ra 012302.8 2008-Aug-10 04:10:48 LOG3 vw_send: To DATATAKING: set dec 303833.3 2008-Aug-10 04:10:48 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Aug-10 04:10:48 LOG3 vw_send: To DATATAKING: pnt tr 012302.8 303833.3 -CJ 2008-Aug-10 04:10:48 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Aug-10 04:10:48 STOP finish_task: Finishing task 'sending tracking commands' 2008-Aug-10 04:10:48 LOG5 finish_task: Level: (3) ID = <10468> Status = 0 0 0 0 ok 2008-Aug-10 04:10:48 INFO2 finish_task: DONE finished sending: tracking commands 2008-Aug-10 04:10:48 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 04:10:48 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Aug-10 04:10:48 LOG5 end_task: Level: (3) ID = <10468> Status = 0 0 0 0 ok 2008-Aug-10 04:10:48 START begin_task: Starting task 'waiting on telescope' 2008-Aug-10 04:10:48 LOG5 begin_task: Level: (3) ID = <10469> Status = 0 0 0 0 ok 2008-Aug-10 04:10:48 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Aug-10 04:10:48 LOG3 waittrk: Start waittrk 5 2008-Aug-10 04:10:48 START begin_task: Starting task 'waiting on telescope movement' 2008-Aug-10 04:10:48 LOG5 begin_task: Level: (4) ID = <10470> Status = 0 0 0 0 ok 2008-Aug-10 04:10:48 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631364866.0} 2008-Aug-10 04:10:48 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-10 04:10:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 04:10:48 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES33PP_p1_082" 2008-Aug-10 04:10:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 04:10:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 04:10:48 LOG4 got_cormsg: From DATATAKING: set ra 012302.8 2008-Aug-10 04:10:48 LOG4 got_cormsg: From DATATAKING: set dec 303833.3 2008-Aug-10 04:10:48 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Aug-10 04:10:48 LOG4 got_cormsg: From DATATAKING: pnt tr 012302.8 303833.3 -CJ 2008-Aug-10 04:10:48 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Aug-10 04:10:48 LOG4 got_cormsg: From DATATAKING: 012302.8 2008-Aug-10 04:10:48 LOG4 got_cormsg: From DATATAKING: vw% 303833.3 2008-Aug-10 04:10:48 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2008-Aug-10 04:10:53 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Aug-10 04:10:53 LOG5 end_task: Level: (4) ID = <10470> Status = 0 0 0 0 ok 2008-Aug-10 04:10:53 START begin_task: Starting task 'waiting on telescope on source' 2008-Aug-10 04:10:53 LOG5 begin_task: Level: (4) ID = <10471> Status = 0 0 0 0 ok 2008-Aug-10 04:10:55 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Aug-10 04:10:55 LOG5 end_task: Level: (4) ID = <10471> Status = 0 0 0 0 ok 2008-Aug-10 04:10:55 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Aug-10 04:10:55 INFO2 waittrk: Now tracking AGES33PP_p1_082 2008-Aug-10 04:10:55 LOG4 waittrk: Current telescope position: Az = 561.43 ZA = 13.42 2008-Aug-10 04:10:55 STOP finish_task: Finishing task 'waiting on telescope' 2008-Aug-10 04:10:55 LOG5 finish_task: Level: (3) ID = <10469> Status = 0 0 0 0 ok 2008-Aug-10 04:10:55 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Aug-10 04:10:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 04:10:55 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Aug-10 04:10:55 LOG5 end_task: Level: (3) ID = <10469> Status = 0 0 0 0 ok 2008-Aug-10 04:10:55 START begin_task: Starting task 'adjusting WAPP power' 2008-Aug-10 04:10:55 LOG5 begin_task: Level: (3) ID = <10472> Status = 0 0 0 0 ok 2008-Aug-10 04:10:55 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Aug-10 04:10:55 INFO2 adjust_power: Starting to adjust WAPP power 2008-Aug-10 04:10:55 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Aug-10 04:10:55 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Aug-10 04:10:55 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 04:10:55 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Aug-10 04:10:55 LOG5 begin_task: Level: (4) ID = <10473> Status = 0 0 0 0 ok 2008-Aug-10 04:10:55 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Aug-10 04:10:55 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 04:10:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 04:10:58 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-10 04:10:58 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Aug-10 04:10:58 LOG5 end_task: Level: (4) ID = <10473> Status = 0 0 0 0 ok 2008-Aug-10 04:10:58 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Aug-10 04:10:58 START begin_task: Starting task 'adjusting WAPP power' 2008-Aug-10 04:10:58 LOG5 begin_task: Level: (4) ID = <10474> Status = 0 0 0 0 ok 2008-Aug-10 04:10:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Aug-10 04:10:58 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Aug-10 04:10:58 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Aug-10 04:10:58 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Aug-10 04:10:58 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Aug-10 04:10:58 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Aug-10 04:10:58 LOG5 begin_task: Level: (5) ID = <10475> Status = 0 0 0 0 ok 2008-Aug-10 04:10:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 04:10:59 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Aug-10 04:10:59 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 6 dB 2008-Aug-10 04:10:59 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 5 5 dB 2008-Aug-10 04:10:59 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 3 dB --- beam 3: 3 3 dB 2008-Aug-10 04:10:59 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 2 3 dB 2008-Aug-10 04:10:59 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Aug-10 04:10:59 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Aug-10 04:10:59 LOG5 end_task: Level: (5) ID = <10475> Status = 0 0 0 0 ok 2008-Aug-10 04:10:59 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.026 1.050 ALFA beam 1: 1.048 1.008 2008-Aug-10 04:10:59 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.907 1.082 ALFA beam 3: 1.093 0.939 2008-Aug-10 04:10:59 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.928 0.919 ALFA beam 5: 1.113 0.971 2008-Aug-10 04:10:59 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.949 1.030 ALFA beam 7: 1.046 0.911 2008-Aug-10 04:10:59 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Aug-10 04:10:59 LOG5 finish_task: Level: (4) ID = <10474> Status = 0 0 0 0 ok 2008-Aug-10 04:10:59 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Aug-10 04:10:59 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 04:10:59 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Aug-10 04:10:59 LOG5 end_task: Level: (4) ID = <10474> Status = 0 0 0 0 ok 2008-Aug-10 04:10:59 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Aug-10 04:10:59 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Aug-10 04:10:59 LOG5 finish_task: Level: (3) ID = <10472> Status = 0 0 0 0 ok 2008-Aug-10 04:10:59 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Aug-10 04:10:59 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 04:10:59 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Aug-10 04:10:59 LOG5 end_task: Level: (3) ID = <10472> Status = 0 0 0 0 ok 2008-Aug-10 04:10:59 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 RM 2008-Aug-10 04:10:59 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 RM 2008-Aug-10 04:10:59 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 RM 2008-Aug-10 04:10:59 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 RM 2008-Aug-10 04:10:59 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Aug-10 04:10:59 START begin_task: Starting task 'WAPP calibration' 2008-Aug-10 04:10:59 LOG5 begin_task: Level: (3) ID = <10476> Status = 0 0 0 0 ok 2008-Aug-10 04:10:59 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Aug-10 04:10:59 START begin_task: Starting task 'selecting calibration type' 2008-Aug-10 04:10:59 LOG5 begin_task: Level: (4) ID = <10477> Status = 0 0 0 0 ok 2008-Aug-10 04:10:59 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Aug-10 04:10:59 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Aug-10 04:10:59 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 04:10:59 START begin_task: Starting task 'waiting on setcal' 2008-Aug-10 04:10:59 LOG5 begin_task: Level: (5) ID = <10478> Status = 0 0 0 0 ok 2008-Aug-10 04:10:59 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 RM' 2008-Aug-10 04:10:59 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Aug-10 04:10:59 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-10 04:11:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 04:11:00 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-10 04:11:00 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Aug-10 04:11:00 LOG5 end_task: Level: (5) ID = <10478> Status = 0 0 0 0 ok 2008-Aug-10 04:11:00 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Aug-10 04:11:00 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-10 04:11:00 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Aug-10 04:11:00 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-10 04:11:00 LOG5 begin_task: Level: (5) ID = <10479> Status = 0 0 0 0 ok 2008-Aug-10 04:11:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 04:11:00 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-10 04:11:00 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-10 04:11:00 LOG5 end_task: Level: (5) ID = <10479> Status = 0 0 0 0 ok 2008-Aug-10 04:11:00 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-10 04:11:00 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Aug-10 04:11:00 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-10 04:11:00 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Aug-10 04:11:00 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-10 04:11:00 LOG5 begin_task: Level: (5) ID = <10480> Status = 0 0 0 0 ok 2008-Aug-10 04:11:00 NOTE WAPPDATA-new_file: New FITS file: wapp.20080810.a2048.0010.fits 2008-Aug-10 04:11:00 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-10 04:11:00 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-10 04:11:00 LOG5 end_task: Level: (5) ID = <10480> Status = 0 0 0 0 ok 2008-Aug-10 04:11:00 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-10 04:11:00 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Aug-10 04:11:00 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Aug-10 04:11:00 LOG5 end_task: Level: (4) ID = <10477> Status = 0 0 0 0 ok 2008-Aug-10 04:11:00 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Aug-10 04:11:00 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Aug-10 04:11:00 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Aug-10 04:11:00 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-10 04:11:00 LOG5 begin_task: Level: (4) ID = <10481> Status = 0 0 0 0 ok 2008-Aug-10 04:11:00 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080810.a2048.0010.fits} 2008-Aug-10 04:11:00 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-10 04:11:00 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Aug-10 04:11:00 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-10 04:11:00 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-10 04:11:00 LOG5 end_task: Level: (4) ID = <10481> Status = 0 0 0 0 ok 2008-Aug-10 04:11:00 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Aug-10 04:11:00 LOG4 take_data: Calling 'take_data 5 5 CAL ON -' 2008-Aug-10 04:11:00 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-10 04:11:00 LOG5 begin_task: Level: (4) ID = <10482> Status = 0 0 0 0 ok 2008-Aug-10 04:11:00 LOG5 log_alfabeam: Parameters: 1.3841111111111108 30.642583333333331 1.011623 2008.6110179481329 -2.000083 2008-Aug-10 04:11:00 LOG4 log_alfabeam: ALFABEAM 0 1.384111111111114 30.642583333333341 2008-Aug-10 04:11:00 LOG4 log_alfabeam: ALFABEAM 1 1.384654270389697 30.540287829722740 2008-Aug-10 04:11:00 LOG4 log_alfabeam: ALFABEAM 2 1.390681754984315 30.608410031320457 2008-Aug-10 04:11:00 LOG4 log_alfabeam: ALFABEAM 3 1.390145930454832 30.710870751911592 2008-Aug-10 04:11:00 LOG4 log_alfabeam: ALFABEAM 4 1.383515796674180 30.744983289966225 2008-Aug-10 04:11:00 LOG4 log_alfabeam: ALFABEAM 5 1.377520042710242 30.676102429839400 2008-Aug-10 04:11:00 LOG4 log_alfabeam: ALFABEAM 6 1.378122514656100 30.573868361163079 2008-Aug-10 04:11:00 INFO2 take_data: Starting WAPP scan: 822300074 2008-Aug-10 04:11:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Aug-10 04:11:01 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-10 04:11:01 LOG5 begin_task: Level: (5) ID = <10483> Status = 0 0 0 0 ok 2008-Aug-10 04:11:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-10 04:11:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 29462.00 2008-Aug-10 04:11:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.364866 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-10 04:11:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.364866 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 04:11:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.364866 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 04:11:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.364866 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 04:11:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.364866 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 04:11:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.364866 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 04:11:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.364866 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 04:11:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.364866 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 04:11:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.364866 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 04:11:07 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (499999966 != 500002014)! 2008-Aug-10 04:11:07 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-10 04:11:07 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-10 04:11:07 LOG5 end_task: Level: (5) ID = <10483> Status = 0 0 0 0 ok 2008-Aug-10 04:11:07 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-10 04:11:07 LOG5 end_task: Level: (4) ID = <10482> Status = 0 0 0 0 ok 2008-Aug-10 04:11:07 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Aug-10 04:11:07 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Aug-10 04:11:07 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Aug-10 04:11:07 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-10 04:11:07 LOG5 begin_task: Level: (4) ID = <10484> Status = 0 0 0 0 ok 2008-Aug-10 04:11:08 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-10 04:11:08 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-10 04:11:08 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-10 04:11:08 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-10 04:11:08 LOG5 end_task: Level: (4) ID = <10484> Status = 0 0 0 0 ok 2008-Aug-10 04:11:08 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Aug-10 04:11:08 LOG4 take_data: Calling 'take_data 5 5 CAL OFF -' 2008-Aug-10 04:11:08 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-10 04:11:08 LOG5 begin_task: Level: (4) ID = <10485> Status = 0 0 0 0 ok 2008-Aug-10 04:11:08 LOG5 log_alfabeam: Parameters: 1.3841111111111108 30.642583333333331 1.013573 2008.6110181699496 -2.000083 2008-Aug-10 04:11:08 LOG4 log_alfabeam: ALFABEAM 0 1.384111111111110 30.642583333333313 2008-Aug-10 04:11:08 LOG4 log_alfabeam: ALFABEAM 1 1.384669669985681 30.540301717224779 2008-Aug-10 04:11:08 LOG4 log_alfabeam: ALFABEAM 2 1.390686896957519 30.608575010194802 2008-Aug-10 04:11:08 LOG4 log_alfabeam: ALFABEAM 3 1.390135626381855 30.711022153715451 2008-Aug-10 04:11:08 LOG4 log_alfabeam: ALFABEAM 4 1.383500308308632 30.744968173452580 2008-Aug-10 04:11:08 LOG4 log_alfabeam: ALFABEAM 5 1.377514994701911 30.675936477950994 2008-Aug-10 04:11:08 LOG4 log_alfabeam: ALFABEAM 6 1.378132907876630 30.573717832244355 2008-Aug-10 04:11:08 INFO2 take_data: Starting WAPP scan: 822300075 2008-Aug-10 04:11:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Aug-10 04:11:08 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-10 04:11:08 LOG5 begin_task: Level: (5) ID = <10486> Status = 0 0 0 0 ok 2008-Aug-10 04:11:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-10 04:11:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 29469.00 2008-Aug-10 04:11:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.364866 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-10 04:11:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.364866 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 04:11:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.364866 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 04:11:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.364866 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 04:11:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.364866 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 04:11:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.364866 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 04:11:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.364866 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 04:11:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.364866 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 04:11:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.364866 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 04:11:14 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (499999966 != 500002014)! 2008-Aug-10 04:11:14 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Aug-10 04:11:14 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-10 04:11:14 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-10 04:11:14 LOG5 end_task: Level: (5) ID = <10486> Status = 0 0 0 0 ok 2008-Aug-10 04:11:14 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-10 04:11:14 LOG5 end_task: Level: (4) ID = <10485> Status = 0 0 0 0 ok 2008-Aug-10 04:11:14 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Aug-10 04:11:14 STOP finish_task: Finishing task 'WAPP calibration' 2008-Aug-10 04:11:14 LOG5 finish_task: Level: (3) ID = <10476> Status = 0 0 0 0 ok 2008-Aug-10 04:11:14 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Aug-10 04:11:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 04:11:14 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Aug-10 04:11:14 LOG5 end_task: Level: (3) ID = <10476> Status = 0 0 0 0 ok 2008-Aug-10 04:11:15 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Aug-10 04:11:15 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 201.84 and ZA = 13.39 2008-Aug-10 04:11:15 LOG3 track_source: Calling 'track_source AGES33PP_p1_082 201.84 13.3905350316 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Aug-10 04:11:15 START begin_task: Starting task 'sending tracking commands' 2008-Aug-10 04:11:15 LOG5 begin_task: Level: (3) ID = <10487> Status = 0 0 0 0 ok 2008-Aug-10 04:11:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES33PP_p1_082} INFO {Slewing to source 'AGES33PP_p1_082' ...} 2008-Aug-10 04:11:15 INFO1 track_source: Starting to track AGES33PP_p1_082 2008-Aug-10 04:11:15 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES33PP_p1_082" 2008-Aug-10 04:11:15 LOG3 vw_send: To DATATAKING: set ra 201.84 2008-Aug-10 04:11:15 LOG3 vw_send: To DATATAKING: set dec 13.3905350316 2008-Aug-10 04:11:15 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Aug-10 04:11:15 LOG3 vw_send: To DATATAKING: pnt tr 201.84 13.3905350316 -CF 2008-Aug-10 04:11:15 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Aug-10 04:11:15 STOP finish_task: Finishing task 'sending tracking commands' 2008-Aug-10 04:11:15 LOG5 finish_task: Level: (3) ID = <10487> Status = 0 0 0 0 ok 2008-Aug-10 04:11:15 INFO2 finish_task: DONE finished sending: tracking commands 2008-Aug-10 04:11:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-10 04:11:15 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Aug-10 04:11:15 LOG5 end_task: Level: (3) ID = <10487> Status = 0 0 0 0 ok 2008-Aug-10 04:11:15 LOG1 fixed_driftmap: Parameters: HA = -00:22:59.9 Start = 01:01:30.2 LST = 01:00:55.9 diff = 34.3 secs 2008-Aug-10 04:11:15 INFO2 fixed_driftmap: Waiting 32.3 seconds for RA 1:24:30 2008-Aug-10 04:11:15 INFO2 lstwait: Waiting for 32.3 secs from LST 01:00:56 to LST 01:01:28 ... 2008-Aug-10 04:11:15 LOG4 send_obs_status: To obs_status: <1> TASKTIME 32.258410368735362 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Aug-10 04:11:15 START begin_task: Starting task 'waiting on wait on LST' 2008-Aug-10 04:11:15 LOG5 begin_task: Level: (3) ID = <10488> Status = 0 0 0 0 ok 2008-Aug-10 04:11:15 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES33PP_p1_082" 2008-Aug-10 04:11:15 LOG4 got_cormsg: From DATATAKING: set ra 201.84 2008-Aug-10 04:11:15 LOG4 got_cormsg: From DATATAKING: set dec 13.3905350316 2008-Aug-10 04:11:15 LOG4 got_cormsg: From DATATAKING: vw% 201.84 2008-Aug-10 04:11:15 LOG4 got_cormsg: From DATATAKING: vw% 13.3905350316 2008-Aug-10 04:11:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 04:11:15 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Aug-10 04:11:15 LOG4 got_cormsg: From DATATAKING: pnt tr 201.84 13.3905350316 -CF 2008-Aug-10 04:11:15 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Aug-10 04:11:15 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Aug-10 04:11:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-10 04:11:47 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Aug-10 04:11:47 LOG5 end_task: Level: (3) ID = <10488> Status = 0 0 0 0 ok 2008-Aug-10 04:11:47 LOG4 lstwait: Finished waiting 0.74 seconds late 2008-Aug-10 04:11:47 INFO3 lstwait: Finished waiting 2008-Aug-10 04:11:47 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Aug-10 04:11:47 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Aug-10 04:11:47 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Aug-10 04:11:47 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Aug-10 04:11:47 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Aug-10 04:11:47 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ -' 2008-Aug-10 04:11:47 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-10 04:11:47 LOG5 begin_task: Level: (3) ID = <10489> Status = 0 0 0 0 ok 2008-Aug-10 04:11:47 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-10 04:11:47 INFO2 take_data: Starting WAPP scan: 822300076 2008-Aug-10 04:11:48 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Aug-10 04:11:48 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-10 04:11:48 LOG5 begin_task: Level: (4) ID = <10490> Status = 0 0 0 0 ok 2008-Aug-10 04:11:48 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-10 04:11:48 INFO1 WAPP=1+2+3+4-start_spectra: start sec 29509.00 2008-Aug-10 04:11:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.364866 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-10 04:11:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.364866 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 04:11:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.364866 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 04:11:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.364866 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 04:11:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.364866 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 04:11:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.364866 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 04:11:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.364866 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 04:11:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.364866 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 04:11:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.364866 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2008-Aug-10 04:11:50 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:11:51 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:11:52 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:11:53 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:11:54 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:11:55 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:11:56 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:11:57 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:11:58 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:11:59 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:12:00 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:12:01 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:12:02 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:12:03 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:12:04 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:12:05 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:12:06 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:12:07 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:12:08 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:12:09 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:12:10 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:12:11 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:12:12 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:12:13 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:12:14 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:12:15 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:12:16 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:12:17 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:12:18 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:12:19 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:12:20 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:12:21 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:12:22 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:12:23 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:12:24 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:12:25 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:12:26 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:12:27 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:12:28 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:12:29 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:12:30 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:12:31 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:12:32 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:12:33 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:12:34 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:12:35 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:12:36 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:12:37 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:12:38 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:12:39 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:12:40 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:12:41 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:12:42 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:12:43 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:12:44 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:12:45 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:12:46 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:12:47 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:12:48 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:12:49 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:12:50 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:12:51 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:12:52 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:12:53 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:12:54 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:12:55 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:12:56 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:12:57 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:12:58 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:12:59 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:13:00 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:13:01 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:13:02 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:13:03 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:13:04 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:13:05 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:13:06 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:13:07 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:13:08 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:13:09 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:13:10 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:13:11 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:13:12 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:13:13 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:13:14 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:13:15 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:13:16 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:13:17 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:13:18 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:13:19 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:13:20 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:13:21 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:13:22 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:13:23 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:13:24 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:13:25 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:13:26 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:13:27 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:13:28 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:13:29 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:13:30 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:13:31 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:13:32 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:13:33 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:13:34 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:13:35 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:13:36 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:13:37 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:13:38 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:13:39 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:13:40 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:13:41 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:13:42 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:13:43 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:13:44 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:13:45 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:13:46 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:13:47 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:13:48 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:13:49 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:13:50 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:13:51 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:13:52 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:13:53 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:13:54 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:13:55 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:13:56 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:13:57 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:13:58 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:13:59 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:14:00 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:14:01 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:14:02 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:14:03 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:14:04 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:14:05 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:14:06 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:14:07 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:14:08 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:14:09 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:14:10 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:14:11 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:14:12 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:14:13 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:14:14 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:14:15 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:14:16 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:14:17 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:14:18 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:14:19 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:14:20 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:14:21 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:14:22 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:14:23 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:14:24 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:14:25 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:14:26 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:14:27 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:14:28 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:14:29 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:14:30 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:14:31 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:14:32 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:14:33 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:14:34 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:14:35 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:14:36 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:14:37 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:14:38 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:14:39 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:14:40 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:14:41 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:14:42 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:14:43 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:14:44 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:14:45 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:14:46 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:14:47 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:14:48 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:14:49 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:14:50 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:14:51 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:14:52 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:14:53 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:14:54 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:14:55 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:14:56 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:14:57 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:14:58 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:14:59 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:15:00 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:15:01 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:15:02 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:15:03 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:15:04 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:15:05 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:15:06 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:15:07 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:15:08 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:15:09 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:15:10 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:15:11 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:15:12 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:15:13 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:15:14 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:15:15 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:15:16 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:15:17 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:15:18 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:15:19 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:15:20 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:15:21 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:15:22 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:15:23 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:15:24 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:15:25 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:15:26 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:15:27 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:15:28 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:15:29 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:15:30 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:15:31 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:15:32 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:15:33 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:15:34 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:15:35 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:15:36 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:15:37 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:15:38 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:15:39 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:15:40 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:15:41 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:15:42 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:15:43 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:15:44 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:15:45 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:15:46 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:15:47 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:15:48 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:15:49 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:15:50 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:15:51 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:15:52 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:15:53 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:15:54 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:15:55 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:15:56 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:15:57 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:15:58 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:15:59 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:16:00 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:16:01 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:16:02 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:16:03 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:16:04 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:16:05 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:16:06 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:16:07 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:16:08 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:16:09 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:16:10 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:16:11 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:16:12 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:16:13 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:16:14 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:16:15 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:16:16 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:16:17 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:16:18 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:16:19 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:16:20 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:16:21 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:16:22 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:16:23 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:16:24 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:16:25 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:16:26 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:16:27 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:16:28 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:16:29 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:16:30 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:16:31 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:16:32 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:16:33 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:16:34 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:16:35 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:16:36 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:16:37 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:16:38 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:16:39 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:16:40 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:16:41 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:16:42 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:16:43 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:16:44 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:16:45 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:16:46 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:16:47 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:16:48 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:16:49 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:16:50 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:16:51 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:16:52 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:16:53 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:16:54 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:16:55 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:16:56 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:16:57 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:16:58 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:16:59 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:17:00 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:17:01 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:17:02 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:17:03 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:17:04 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:17:05 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:17:06 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:17:07 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:17:08 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:17:09 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:17:10 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:17:11 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:17:12 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:17:13 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:17:14 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:17:15 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:17:16 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:17:17 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:17:18 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:17:19 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:17:20 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:17:21 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:17:22 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:17:23 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:17:24 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:17:25 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:17:26 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:17:27 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:17:28 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:17:29 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:17:30 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:17:31 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:17:32 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:17:33 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:17:34 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:17:35 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:17:36 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:17:37 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:17:38 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:17:39 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:17:40 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 04:17:40.298 (seconds: 15460.298)!} 2008-Aug-10 04:17:40 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 04:17:40.298 (seconds: 15460.298)! 2008-Aug-10 04:17:40 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:17:41 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 15459.0 to 15460.0! 2008-Aug-10 04:17:41 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:17:42 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (15459.0 - 15461.0)! 2008-Aug-10 04:17:42 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:17:43 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:17:44 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:17:45 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:17:46 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:17:47 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:17:48 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:17:49 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:17:50 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:17:51 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:17:52 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:17:53 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:17:54 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:17:55 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:17:56 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:17:57 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:17:58 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:17:59 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:18:00 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:18:01 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:18:02 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:18:03 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:18:04 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:18:05 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:18:06 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:18:07 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:18:08 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:18:09 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:18:10 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:18:11 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:18:12 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:18:13 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:18:14 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:18:15 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:18:16 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:18:17 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:18:18 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:18:19 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:18:20 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:18:21 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:18:22 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:18:23 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:18:24 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:18:25 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:18:26 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:18:27 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:18:28 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:18:29 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:18:30 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:18:31 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:18:32 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:18:33 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:18:34 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:18:35 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:18:36 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:18:37 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:18:38 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:18:39 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:18:40 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:18:41 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:18:42 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:18:43 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:18:44 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:18:45 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:18:46 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:18:47 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:18:48 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:18:49 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:18:50 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:18:51 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:18:52 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:18:53 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:18:54 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:18:55 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:18:56 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:18:57 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:18:58 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:18:59 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:19:00 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:19:01 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:19:02 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:19:03 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:19:04 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:19:05 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:19:06 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:19:07 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:19:08 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:19:09 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:19:10 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:19:11 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:19:12 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:19:13 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:19:14 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:19:15 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:19:16 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:19:17 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:19:18 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:19:19 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:19:20 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:19:21 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:19:22 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:19:23 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:19:24 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:19:25 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:19:26 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:19:27 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:19:28 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:19:29 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:19:30 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:19:31 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:19:32 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:19:33 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:19:34 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:19:35 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:19:36 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:19:37 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:19:38 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:19:39 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:19:40 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:19:41 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:19:42 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:19:43 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:19:44 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:19:45 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:19:46 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:19:47 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:19:48 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:19:49 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:19:50 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:19:51 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:19:52 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:19:53 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:19:54 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:19:55 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:19:56 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:19:57 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:19:58 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:19:59 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:20:00 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:20:01 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:20:02 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:20:03 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:20:04 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:20:05 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:20:06 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:20:07 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:20:08 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:20:09 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:20:10 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:20:11 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:20:12 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:20:13 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:20:14 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:20:15 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:20:16 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:20:17 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:20:18 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:20:19 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:20:20 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:20:21 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:20:22 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:20:23 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:20:24 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:20:25 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:20:26 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:20:27 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:20:28 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:20:29 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:20:30 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:20:31 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:20:32 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:20:33 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:20:34 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:20:35 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:20:36 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:20:37 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:20:38 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:20:39 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:20:40 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:20:41 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:20:42 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:20:43 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:20:44 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:20:45 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:20:46 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:20:47 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:20:48 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:20:49 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:20:50 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:20:51 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:20:52 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:20:53 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:20:54 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:20:55 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:20:56 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:20:57 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:20:58 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:20:59 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:21:00 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:21:01 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:21:02 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:21:03 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:21:04 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:21:05 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:21:06 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:21:07 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:21:08 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:21:09 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:21:10 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:21:11 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:21:12 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:21:13 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:21:14 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:21:15 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:21:16 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:21:17 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:21:18 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:21:19 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:21:20 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:21:21 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:21:22 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:21:23 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:21:24 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:21:25 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:21:26 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:21:27 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:21:28 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:21:29 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:21:30 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:21:31 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:21:32 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:21:33 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:21:34 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:21:35 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:21:36 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:21:37 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:21:38 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:21:39 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:21:40 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:21:41 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:21:42 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:21:43 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:21:44 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:21:45 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:21:46 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:21:47 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:21:48 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:21:49 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:21:50 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:21:51 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:21:52 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:21:53 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:21:54 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:21:55 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:21:56 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:21:57 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:21:58 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:21:59 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:22:00 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:22:01 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:22:02 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:22:03 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:22:04 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:22:05 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:22:06 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:22:07 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:22:08 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:22:09 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:22:10 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:22:11 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:22:12 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:22:13 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:22:14 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:22:15 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:22:16 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:22:17 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:22:18 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:22:19 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:22:20 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:22:21 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:22:22 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:22:23 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:22:24 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:22:25 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:22:26 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:22:27 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:22:28 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:22:29 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:22:30 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:22:31 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:22:32 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:22:33 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:22:34 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:22:35 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:22:36 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:22:37 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:22:38 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:22:39 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:22:40 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:22:41 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:22:42 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:22:43 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:22:44 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:22:45 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:22:46 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:22:47 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:22:48 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:22:49 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:22:50 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:22:51 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:22:52 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:22:53 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:22:54 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:22:55 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:22:56 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:22:57 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:22:58 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:22:59 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:23:00 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:23:01 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:23:02 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:23:03 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:23:04 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:23:05 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:23:06 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:23:07 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:23:08 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:23:09 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:23:10 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:23:11 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:23:12 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:23:13 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:23:14 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:23:15 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:23:16 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:23:17 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:23:18 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:23:19 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:23:20 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:23:21 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:23:22 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:23:23 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:23:24 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:23:25 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:23:26 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:23:27 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:23:28 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:23:29 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:23:30 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:23:31 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:23:32 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:23:33 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:23:34 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:23:35 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:23:36 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:23:37 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:23:38 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:23:39 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:23:40 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:23:41 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:23:42 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:23:43 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:23:44 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:23:45 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:23:46 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:23:47 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:23:48 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:23:49 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:23:50 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:23:51 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:23:52 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:23:53 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:23:54 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:23:55 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:23:56 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:23:57 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:23:58 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:23:59 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:24:00 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:24:01 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:24:02 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:24:03 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:24:04 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:24:05 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:24:06 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:24:07 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:24:08 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:24:09 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:24:10 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:24:11 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:24:12 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:24:13 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:24:14 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:24:15 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:24:16 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:24:17 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:24:18 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:24:19 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:24:20 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:24:21 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:24:22 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:24:23 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:24:24 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:24:25 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:24:26 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:24:27 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:24:28 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:24:29 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:24:30 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:24:31 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:24:32 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:24:33 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:24:34 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:24:35 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:24:36 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:24:37 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:24:38 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:24:39 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:24:40 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:24:41 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:24:42 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:24:43 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:24:44 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:24:45 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:24:46 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:24:47 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:24:48 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:24:49 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:24:50 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:24:51 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:24:52 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:24:53 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:24:54 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:24:55 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:24:56 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:24:57 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:24:58 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:24:59 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:25:00 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:25:01 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:25:02 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:25:03 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:25:04 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:25:05 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:25:06 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:25:07 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:25:08 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:25:09 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:25:10 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:25:11 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:25:12 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:25:13 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:25:14 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:25:15 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:25:16 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:25:17 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:25:18 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:25:19 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:25:20 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:25:21 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:25:22 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:25:23 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:25:24 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:25:25 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:25:26 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:25:27 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:25:28 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:25:29 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:25:30 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:25:31 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:25:32 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:25:33 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:25:34 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:25:35 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:25:36 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:25:37 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:25:38 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:25:39 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:25:40 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:25:41 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:25:42 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:25:43 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:25:44 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:25:45 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:25:46 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:25:47 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:25:48 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:25:49 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:25:50 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:25:51 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:25:52 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:25:53 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:25:54 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:25:55 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:25:56 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:25:57 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:25:58 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:25:59 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:26:00 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:26:01 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:26:02 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:26:03 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:26:04 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:26:05 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:26:06 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:26:07 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:26:08 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:26:09 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:26:10 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:26:11 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:26:12 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:26:13 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:26:14 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:26:15 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:26:16 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:26:17 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:26:18 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:26:19 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:26:20 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:26:21 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:26:22 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:26:23 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:26:24 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:26:25 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:26:26 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:26:27 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:26:28 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:26:29 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:26:30 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:26:31 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:26:32 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:26:33 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:26:34 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:26:35 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:26:36 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:26:37 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:26:38 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:26:39 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:26:40 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:26:41 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:26:42 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:26:43 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:26:44 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:26:45 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:26:46 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:26:47 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:26:48 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:26:49 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:26:50 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:26:51 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:26:52 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:26:53 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:26:54 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:26:55 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:26:56 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:26:57 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:26:58 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:26:59 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:27:00 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:27:01 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:27:02 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:27:03 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:27:04 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:27:05 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:27:06 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:27:07 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:27:08 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:27:09 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:27:10 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:27:11 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:27:12 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:27:13 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:27:14 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:27:15 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:27:16 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:27:17 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:27:18 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:27:19 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:27:20 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:27:21 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:27:22 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:27:23 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:27:24 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:27:25 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:27:26 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:27:27 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:27:28 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:27:29 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:27:30 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:27:31 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:27:32 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:27:33 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:27:34 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:27:35 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:27:36 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:27:37 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:27:38 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:27:39 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:27:40 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:27:41 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:27:42 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:27:43 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:27:44 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:27:45 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:27:46 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:27:47 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:27:48 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:27:49 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:27:50 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:27:51 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:27:52 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:27:53 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:27:54 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:27:55 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:27:56 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:27:57 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:27:58 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:27:59 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:28:00 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:28:01 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:28:02 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:28:03 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:28:04 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:28:05 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:28:06 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:28:07 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:28:08 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:28:09 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:28:10 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:28:11 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:28:12 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:28:13 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:28:14 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:28:15 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:28:16 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:28:17 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:28:18 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:28:19 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:28:20 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:28:21 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:28:22 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:28:23 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:28:24 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:28:25 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:28:26 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:28:27 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:28:28 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:28:29 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:28:30 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:28:31 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:28:32 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:28:33 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:28:34 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:28:35 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:28:36 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:28:37 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:28:38 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:28:39 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:28:40 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:28:41 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:28:42 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:28:43 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:28:44 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:28:45 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:28:46 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:28:47 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:28:48 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:28:49 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:28:50 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:28:51 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:28:52 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:28:53 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:28:54 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:28:55 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:28:56 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:28:57 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:28:58 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:28:59 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:29:00 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:29:01 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:29:02 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:29:03 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 100002014)! 2008-Aug-10 04:29:04 WARNING WAPP=3-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 1000020