2008-Jul-25 01:32:33 BEGIN executive: CIMA executive starting ... 2008-Jul-25 01:32:33 NOTE executive: STARTING NEW CIMA SESSION 2008-Jul-25 01:32:33 INFO1 executive: Using CIMA version 3.0.00 'next' from 2008-06-12 15:50 2008-Jul-25 01:32:33 INFO4 executive: This is an ON-LINE session 2008-Jul-25 01:32:33 INFO4 executive: This is a REMOTE session 2008-Jul-25 01:32:33 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2008-Jul-25 01:32:33 INFO1 executive: CIMA session for project 'a2048' in 'line' mode for 'JID' 2008-Jul-25 01:32:33 INFO2 executive: Logging to '/share/obs4/usr/a2048/a2048.cimalog_20080725' 2008-Jul-25 01:32:34 LOG2 log_preferences: Currently applied preferences: 2008-Jul-25 01:32:34 LOG2 log_preferences: prefs(dailylog) = daily 2008-Jul-25 01:32:34 LOG2 log_preferences: prefs(offlinelog) = skip 2008-Jul-25 01:32:34 LOG2 log_preferences: prefs(datawindow) = ignore 2008-Jul-25 01:32:34 LOG2 log_preferences: prefs(limitwarning) = enabled 2008-Jul-25 01:32:34 LOG2 log_preferences: prefs(wappfailure) = abort 2008-Jul-25 01:32:34 LOG2 log_preferences: prefs(helpstyle) = stay-open 2008-Jul-25 01:32:34 LOG2 log_preferences: prefs(logcolours) = full 2008-Jul-25 01:32:34 LOG2 log_preferences: prefs(displaylevel) = INFO3 2008-Jul-25 01:32:34 LOG2 log_preferences: prefs(loglevel) = LOG5 2008-Jul-25 01:32:34 LOG2 log_preferences: prefs(displayformat) = short 2008-Jul-25 01:32:34 LOG2 log_preferences: prefs(logformat) = new 2008-Jul-25 01:32:34 LOG2 log_preferences: prefs(fontsize) = 4 2008-Jul-25 01:32:34 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2008-Jul-25 01:32:34 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2048 2008-Jul-25 01:32:34 ALERT executive: CIMA executive ready 2008-Jul-25 01:32:36 NOTE frontend: CIMA frontend ready 2008-Jul-25 01:32:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 01:32:37 LOG4 got_cormsg: From DATATAKING: setup 2008-Jul-25 01:32:44 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0x300002 2008-Jul-25 01:32:44 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0x300002' 2008-Jul-25 01:32:44 LOG4 got_cormsg: From DATATAKING: vw% io 2008-Jul-25 01:32:44 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2008-Jul-25 01:32:44 LOG4 got_cormsg: From DATATAKING: 2008-Jul-25 01:32:44 LOG4 got_cormsg: From DATATAKING: vw% tape stat 2008-Jul-25 01:32:44 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2008-Jul-25 01:32:44 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2008-Jul-25 01:32:44 LOG4 got_cormsg: From DATATAKING: vw% connectall 2008-Jul-25 01:32:44 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2008-Jul-25 01:32:44 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2008-Jul-25 01:32:44 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2008-Jul-25 01:32:44 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2008-Jul-25 01:32:44 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2008-Jul-25 01:32:44 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2008-Jul-25 01:32:44 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2008-Jul-25 01:32:44 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2008-Jul-25 01:32:44 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2048 2008-Jul-25 01:32:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 01:32:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 01:32:58 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2008-Jul-25 01:32:58 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2008-Jul-25 01:32:58 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2008-Jul-25 01:32:58 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2008-Jul-25 01:32:58 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Jul-25 01:32:58 NOTE select_receiver: Starting to select receiver ALFA 2008-Jul-25 01:32:58 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Jul-25 01:32:58 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Jul-25 01:32:58 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Jul-25 01:32:58 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Jul-25 01:32:58 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Jul-25 01:32:58 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Jul-25 01:32:58 DONE finish_task: DONE finished selecting: receiver ALFA 2008-Jul-25 01:32:58 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Jul-25 01:32:58 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Jul-25 01:32:58 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Jul-25 01:32:58 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Jul-25 01:32:58 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Jul-25 01:33:05 LOG4 got_cormsg: From DATATAKING: waiting for turret position:26.64 2008-Jul-25 01:33:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 01:33:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 01:33:21 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2008-Jul-25 01:33:21 LOG4 exec_msg: From OBSERVER: restart_wapp 2008-Jul-25 01:33:21 LOG5 restart_wapp: Calling 'restart_wapp' 2008-Jul-25 01:33:21 BEGIN begin_task: Starting task 'restarting the WAPPs' 2008-Jul-25 01:33:21 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Jul-25 01:33:21 NOTE restart_wapp: Restarting all WAPPs 2008-Jul-25 01:33:21 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2008-Jul-25 01:33:21 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2008-Jul-25 01:33:21 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Jul-25 01:33:21 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Jul-25 01:33:25 ALERT WAPP=2-wappcon: WAPP2 restarting 2008-Jul-25 01:33:25 ALERT WAPP=1-wappcon: WAPP1 restarting 2008-Jul-25 01:33:25 ALERT WAPP=4-wappcon: WAPP4 restarting 2008-Jul-25 01:33:25 ALERT WAPP=3-wappcon: WAPP3 restarting 2008-Jul-25 01:34:25 NOTE CIMA-load_config_file: Loading and applying configuration file 'ages_alfafu.conf' 2008-Jul-25 01:34:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Jul-25 01:34:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Jul-25 01:34:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Jul-25 01:34:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Jul-25 01:34:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Jul-25 01:34:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2008-Jul-25 01:34:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Jul-25 01:34:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786" 2008-Jul-25 01:34:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786" 2008-Jul-25 01:34:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786" 2008-Jul-25 01:34:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786" 2008-Jul-25 01:34:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786" 2008-Jul-25 01:34:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786" 2008-Jul-25 01:34:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786" 2008-Jul-25 01:34:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786" 2008-Jul-25 01:34:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786" 2008-Jul-25 01:34:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Jul-25 01:34:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Jul-25 01:34:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Jul-25 01:34:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Jul-25 01:34:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Jul-25 01:34:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Jul-25 01:34:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Jul-25 01:34:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Jul-25 01:34:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Jul-25 01:34:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Jul-25 01:34:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Jul-25 01:34:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Jul-25 01:34:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Jul-25 01:34:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2008-Jul-25 01:34:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Jul-25 01:34:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Jul-25 01:34:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Jul-25 01:34:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Jul-25 01:34:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Jul-25 01:34:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Jul-25 01:34:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Jul-25 01:34:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Jul-25 01:34:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Jul-25 01:34:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1670.405752" 2008-Jul-25 01:34:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Jul-25 01:34:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Jul-25 01:34:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Jul-25 01:34:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Jul-25 01:34:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Jul-25 01:34:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Jul-25 01:34:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Jul-25 01:34:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Jul-25 01:34:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Jul-25 01:34:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Jul-25 01:34:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Jul-25 01:34:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Jul-25 01:34:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Jul-25 01:34:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Jul-25 01:34:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Jul-25 01:34:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Jul-25 01:34:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Jul-25 01:34:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Jul-25 01:34:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Jul-25 01:34:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Jul-25 01:34:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Jul-25 01:34:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Jul-25 01:34:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Jul-25 01:34:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Jul-25 01:34:31 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2008-Jul-25 01:34:31 LOG4 exec_msg: From OBSERVER: config_iflo 2008-Jul-25 01:34:31 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Jul-25 01:34:31 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Jul-25 01:34:31 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Jul-25 01:34:31 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Jul-25 01:34:31 INFO1 config_iflo: Selecting receiver ALFA 2008-Jul-25 01:34:31 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2008-Jul-25 01:34:31 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2008-Jul-25 01:34:31 START begin_task: Starting task 'selecting receiver ALFA' 2008-Jul-25 01:34:31 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Jul-25 01:34:31 NOTE select_receiver: Starting to select receiver ALFA 2008-Jul-25 01:34:31 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Jul-25 01:34:31 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Jul-25 01:34:31 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Jul-25 01:34:31 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Jul-25 01:34:31 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Jul-25 01:34:31 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Jul-25 01:34:31 INFO2 finish_task: DONE finished selecting: receiver ALFA 2008-Jul-25 01:34:31 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-25 01:34:31 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Jul-25 01:34:31 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Jul-25 01:34:31 START begin_task: Starting task 'waiting for receiver ALFA' 2008-Jul-25 01:34:31 LOG5 begin_task: Level: (2) ID = <10005> Status = 0 0 0 0 ok 2008-Jul-25 01:34:31 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2008-Jul-25 01:34:31 LOG5 end_task: Level: (2) ID = <10005> Status = 0 0 0 0 ok 2008-Jul-25 01:34:31 INFO1 config_iflo: Configuring rest of the IF/LO path 2008-Jul-25 01:34:31 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2008-Jul-25 01:34:31 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jul-25 01:34:31 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Jul-25 01:34:31 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jul-25 01:34:31 LOG5 begin_task: Level: (2) ID = <10006> Status = 0 0 0 0 ok 2008-Jul-25 01:34:31 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Jul-25 01:34:31 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Jul-25 01:34:32 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jul-25 01:34:32 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jul-25 01:34:32 LOG5 end_task: Level: (2) ID = <10006> Status = 0 0 0 0 ok 2008-Jul-25 01:34:32 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jul-25 01:34:32 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Jul-25 01:34:32 LOG3 vw_send: To DATATAKING: alfafb 1 2008-Jul-25 01:34:32 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2008-Jul-25 01:34:32 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Jul-25 01:34:32 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Jul-25 01:34:32 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2008-Jul-25 01:34:32 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2008-Jul-25 01:34:32 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2008-Jul-25 01:34:32 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1670405752.0} 2008-Jul-25 01:34:32 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2008-Jul-25 01:34:32 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2008-Jul-25 01:34:32 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Jul-25 01:34:32 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Jul-25 01:34:32 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Jul-25 01:34:32 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Jul-25 01:34:32 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Jul-25 01:34:32 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2008-Jul-25 01:34:32 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2008-Jul-25 01:34:32 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2008-Jul-25 01:34:32 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2008-Jul-25 01:34:32 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Jul-25 01:34:32 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2008-Jul-25 01:34:33 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Jul-25 01:34:33 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Jul-25 01:34:33 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 01:34:33 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Jul-25 01:34:33 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2008-Jul-25 01:34:33 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Jul-25 01:34:33 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2008-Jul-25 01:34:33 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2008-Jul-25 01:34:33 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Jul-25 01:34:33 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jul-25 01:34:33 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Jul-25 01:34:33 LOG5 begin_task: Level: (2) ID = <10007> Status = 0 0 0 0 ok 2008-Jul-25 01:34:33 LOG4 got_cormsg: From DATATAKING: alfafb 1 2008-Jul-25 01:34:33 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2008-Jul-25 01:34:33 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2008-Jul-25 01:34:33 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2008-Jul-25 01:34:33 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2008-Jul-25 01:34:33 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1670405752.0} 2008-Jul-25 01:34:33 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2008-Jul-25 01:34:33 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2008-Jul-25 01:34:33 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2008-Jul-25 01:34:33 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2008-Jul-25 01:34:33 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2008-Jul-25 01:34:33 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2008-Jul-25 01:34:33 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Jul-25 01:34:33 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2008-Jul-25 01:34:33 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Jul-25 01:34:33 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 01:34:33 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Jul-25 01:34:33 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2008-Jul-25 01:34:33 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2008-Jul-25 01:34:33 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2008-Jul-25 01:34:33 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jul-25 01:34:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 01:34:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 01:34:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 01:34:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 01:34:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 01:34:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 01:34:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 01:34:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 01:34:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 01:34:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 01:34:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 01:34:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 01:34:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 01:34:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 01:34:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 01:34:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 01:34:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 01:34:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 01:34:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 01:34:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 01:34:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 01:34:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 01:34:47 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jul-25 01:34:47 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Jul-25 01:34:47 LOG5 end_task: Level: (2) ID = <10007> Status = 0 0 0 0 ok 2008-Jul-25 01:34:47 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Jul-25 01:34:47 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Jul-25 01:34:47 LOG5 finish_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Jul-25 01:34:47 DONE finish_task: DONE finished configuration: IF/LO path 2008-Jul-25 01:34:47 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Jul-25 01:34:47 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Jul-25 01:34:47 LOG5 end_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Jul-25 01:34:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 01:34:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Jul-25 01:34:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Jul-25 01:34:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Jul-25 01:34:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Jul-25 01:34:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Jul-25 01:34:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Jul-25 01:34:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Jul-25 01:34:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Jul-25 01:34:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Jul-25 01:34:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Jul-25 01:34:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Jul-25 01:34:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Jul-25 01:34:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Jul-25 01:34:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Jul-25 01:34:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Jul-25 01:34:48 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2008-Jul-25 01:34:48 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2008-Jul-25 01:34:48 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Jul-25 01:34:48 LOG5 begin_task: Level: (1) ID = <10008> Status = 0 0 0 0 ok 2008-Jul-25 01:34:48 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Jul-25 01:34:48 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Jul-25 01:34:48 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2008-Jul-25 01:34:48 START begin_task: Starting task 'selecting calibration port' 2008-Jul-25 01:34:48 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Jul-25 01:34:48 LOG3 vw_send: To DATATAKING: calport 3 2008-Jul-25 01:34:48 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Jul-25 01:34:48 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jul-25 01:34:48 START begin_task: Starting task 'waiting on calport' 2008-Jul-25 01:34:48 LOG5 begin_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-Jul-25 01:34:48 LOG5 CIMA-load_config_file: ALFA is already centered on beam 0. 2008-Jul-25 01:34:48 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Jul-25 01:34:48 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jul-25 01:34:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 01:34:48 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jul-25 01:34:48 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Jul-25 01:34:48 LOG5 end_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-Jul-25 01:34:48 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Jul-25 01:34:48 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Jul-25 01:34:48 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Jul-25 01:34:48 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Jul-25 01:34:48 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Jul-25 01:34:48 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jul-25 01:34:48 LOG5 begin_task: Level: (2) ID = <10011> Status = 0 0 0 0 ok 2008-Jul-25 01:34:49 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jul-25 01:34:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 01:34:49 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jul-25 01:34:49 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jul-25 01:34:49 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jul-25 01:34:49 LOG5 end_task: Level: (2) ID = <10011> Status = 0 0 0 0 ok 2008-Jul-25 01:34:49 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Jul-25 01:34:49 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Jul-25 01:34:49 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Jul-25 01:34:49 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Jul-25 01:34:49 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Jul-25 01:34:49 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Jul-25 01:34:49 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Jul-25 01:34:49 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Jul-25 01:34:49 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 JID 2008-Jul-25 01:34:49 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 JID 2008-Jul-25 01:34:49 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 JID 2008-Jul-25 01:34:49 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 JID 2008-Jul-25 01:34:49 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Jul-25 01:34:49 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Jul-25 01:34:49 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jul-25 01:34:49 LOG5 begin_task: Level: (2) ID = <10012> Status = 0 0 0 0 ok 2008-Jul-25 01:34:49 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jul-25 01:34:49 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jul-25 01:34:49 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jul-25 01:34:49 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jul-25 01:34:49 LOG5 end_task: Level: (2) ID = <10012> Status = 0 0 0 0 ok 2008-Jul-25 01:34:49 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 JID 2008-Jul-25 01:34:49 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 JID 2008-Jul-25 01:34:49 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 JID 2008-Jul-25 01:34:49 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 JID 2008-Jul-25 01:34:49 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Jul-25 01:34:49 LOG5 finish_task: Level: (1) ID = <10008> Status = 0 0 0 0 ok 2008-Jul-25 01:34:49 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Jul-25 01:34:49 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Jul-25 01:34:49 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Jul-25 01:34:49 LOG5 end_task: Level: (1) ID = <10008> Status = 0 0 0 0 ok 2008-Jul-25 01:34:49 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 JID' 2008-Jul-25 01:34:49 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Jul-25 01:34:49 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Jul-25 01:34:49 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2008-Jul-25 01:34:49 LOG4 exec_msg: From OBSERVER: rotate_alfa 0 nowait 2008-Jul-25 01:34:49 BEGIN begin_task: Starting task 'rotate ALFA to +0 degrees' 2008-Jul-25 01:34:49 LOG5 begin_task: Level: (1) ID = <10013> Status = 0 0 0 0 ok 2008-Jul-25 01:34:49 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +0 degrees ...} 2008-Jul-25 01:34:49 INFO2 rotate_alfa: ALFA commanded to +0.0 degrees 2008-Jul-25 01:34:49 LOG3 sock_errsend: To ALFAMOTOR: POSITION 0 REPLY 2008-Jul-25 01:34:49 STOP finish_task: Finishing task 'rotate ALFA to +0 degrees' 2008-Jul-25 01:34:49 LOG5 finish_task: Level: (1) ID = <10013> Status = 0 0 0 0 ok 2008-Jul-25 01:34:49 DONE finish_task: DONE finished configuration: rotating ALFA to +0 degrees 2008-Jul-25 01:34:49 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Jul-25 01:34:49 END end_task: Finishing task 'rotate ALFA to +0 degrees' with status 'OK' 2008-Jul-25 01:34:49 LOG5 end_task: Level: (1) ID = <10013> Status = 0 0 0 0 ok 2008-Jul-25 01:34:50 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 JID' 2008-Jul-25 01:34:50 NOTE WAPPDATA-new_file: New FITS file: wapp.20080725.a2048.0000.fits 2008-Jul-25 01:34:50 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20080725.a2048.0000.fits} 2008-Jul-25 01:34:51 NOTE CIMA-load_config_file: Configuration file 'ages_alfafu.conf' applied. 2008-Jul-25 01:35:38 COMMAND CIMA-send_to_exec: Sending command to point to a source 2008-Jul-25 01:35:38 LOG4 exec_msg: From OBSERVER: track_new_source J223237+231205 223237.0 231205 J 0 0 main small /share/obs4/usr/a2048/n7332fu.cat 16619 Topocentric velocity(optical) 0 0 0 0 0 2008-Jul-25 01:35:38 LOG1 track_new_source: Calling 'track_new_source J223237+231205 223237.0 231205 J 0 0 main small /share/obs4/usr/a2048/n7332fu.cat 16619 Topocentric velocity(optical) 0 0 0 0 0' 2008-Jul-25 01:35:38 BEGIN begin_task: Starting task 'selecting new source' 2008-Jul-25 01:35:38 LOG5 begin_task: Level: (1) ID = <10014> Status = 0 0 0 0 ok 2008-Jul-25 01:35:38 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {J223237+231205} INFO {Selecting source 'J223237+231205' ...} 2008-Jul-25 01:35:38 LOG3 track_source: Calling 'track_source J223237+231205 223237.0 231205 J 0 0 main small /share/obs4/usr/a2048/n7332fu.cat 16619 Topocentric velocity(optical)' 2008-Jul-25 01:35:38 START begin_task: Starting task 'sending tracking commands' 2008-Jul-25 01:35:38 LOG5 begin_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2008-Jul-25 01:35:38 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {J223237+231205} INFO {Slewing to source 'J223237+231205' ...} 2008-Jul-25 01:35:38 INFO1 track_source: Starting to track J223237+231205 2008-Jul-25 01:35:38 LOG3 vw_send: To DATATAKING: hdrldsrcnm "J223237+231205" 2008-Jul-25 01:35:38 LOG3 vw_send: To DATATAKING: set ra 223237.0 2008-Jul-25 01:35:38 LOG3 vw_send: To DATATAKING: set dec 231205 2008-Jul-25 01:35:38 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Jul-25 01:35:38 LOG3 vw_send: To DATATAKING: pnt tr 223237.0 231205 -CJ 2008-Jul-25 01:35:38 LOG3 vw_send: To DATATAKING: dopsetvel 16619 topo 2008-Jul-25 01:35:38 STOP finish_task: Finishing task 'sending tracking commands' 2008-Jul-25 01:35:38 LOG5 finish_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2008-Jul-25 01:35:38 INFO2 finish_task: DONE finished sending: tracking commands 2008-Jul-25 01:35:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-25 01:35:38 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Jul-25 01:35:38 LOG5 end_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2008-Jul-25 01:35:38 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2008-Jul-25 01:35:38 START begin_task: Starting task 'applying pointing corrections' 2008-Jul-25 01:35:38 LOG5 begin_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2008-Jul-25 01:35:38 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2008-Jul-25 01:35:38 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2008-Jul-25 01:35:38 STOP finish_task: Finishing task 'applying pointing corrections' 2008-Jul-25 01:35:38 LOG5 finish_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2008-Jul-25 01:35:38 INFO2 finish_task: DONE finished applying: pointing corrections 2008-Jul-25 01:35:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-25 01:35:38 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2008-Jul-25 01:35:38 LOG5 end_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2008-Jul-25 01:35:38 STOP finish_task: Finishing task 'selecting new source' 2008-Jul-25 01:35:38 LOG5 finish_task: Level: (1) ID = <10014> Status = 0 0 0 0 ok 2008-Jul-25 01:35:38 DONE finish_task: DONE finished selecting: new source 2008-Jul-25 01:35:38 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Jul-25 01:35:38 END end_task: Finishing task 'selecting new source' with status 'OK' 2008-Jul-25 01:35:38 LOG5 end_task: Level: (1) ID = <10014> Status = 0 0 0 0 ok 2008-Jul-25 01:35:38 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "J223237+231205" 2008-Jul-25 01:35:38 LOG4 got_cormsg: From DATATAKING: set ra 223237.0 2008-Jul-25 01:35:38 LOG4 got_cormsg: From DATATAKING: set dec 231205 2008-Jul-25 01:35:38 LOG4 got_cormsg: From DATATAKING: vw% 223237.0 2008-Jul-25 01:35:38 LOG4 got_cormsg: From DATATAKING: vw% 231205 2008-Jul-25 01:35:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 01:35:38 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Jul-25 01:35:38 LOG4 got_cormsg: From DATATAKING: pnt tr 223237.0 231205 -CJ 2008-Jul-25 01:35:38 LOG4 got_cormsg: From DATATAKING: dopsetvel 16619 topo 2008-Jul-25 01:35:38 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Jul-25 01:35:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 01:35:38 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2008-Jul-25 01:35:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 01:35:54 COMMAND CIMA-send_to_exec: Sending command to run standard on/off 2008-Jul-25 01:35:54 LOG4 exec_msg: From OBSERVER: onoff 1 300 60 hcorcal 10 each first 0 2008-Jul-25 01:35:54 LOG1 onoff_wapp: Calling 'onoff_wapp 1 300 60 hcorcal 10 each first 0' 2008-Jul-25 01:35:54 BEGIN begin_task: Starting task 'standard on/off' 2008-Jul-25 01:35:54 LOG5 begin_task: Level: (1) ID = <10017> Status = 0 0 0 0 ok 2008-Jul-25 01:35:54 INFO4 begin_task: MAKING 'standard on/off' using 'alfa' + 'WAPP' on 'J223237+231205' 2008-Jul-25 01:35:54 INFO1 onoff_wapp: Starting pattern: Standard on/off 2008-Jul-25 01:35:54 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Standard on/off} TOTALLOOPS 1 INFO {Starting standard on/off observation ...} 2008-Jul-25 01:35:54 START begin_task: Starting task 'waiting on telescope' 2008-Jul-25 01:35:54 LOG5 begin_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2008-Jul-25 01:35:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Jul-25 01:35:54 LOG3 waittrk: Start waittrk 5 2008-Jul-25 01:35:54 START begin_task: Starting task 'waiting on telescope movement' 2008-Jul-25 01:35:54 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2008-Jul-25 01:35:59 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Jul-25 01:35:59 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2008-Jul-25 01:35:59 START begin_task: Starting task 'waiting on telescope on source' 2008-Jul-25 01:35:59 LOG5 begin_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2008-Jul-25 01:41:39 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Jul-25 01:41:39 LOG5 end_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2008-Jul-25 01:41:39 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Jul-25 01:41:39 INFO2 waittrk: Now tracking J223237+231205 2008-Jul-25 01:41:39 LOG4 waittrk: Current telescope position: Az = 608.99 ZA = 16.01 2008-Jul-25 01:41:39 STOP finish_task: Finishing task 'waiting on telescope' 2008-Jul-25 01:41:39 LOG5 finish_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2008-Jul-25 01:41:39 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Jul-25 01:41:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-25 01:41:39 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Jul-25 01:41:39 LOG5 end_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2008-Jul-25 01:41:39 START begin_task: Starting task 'selecting calibration type' 2008-Jul-25 01:41:39 LOG5 begin_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2008-Jul-25 01:41:39 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Jul-25 01:41:39 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Jul-25 01:41:39 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jul-25 01:41:39 START begin_task: Starting task 'waiting on setcal' 2008-Jul-25 01:41:39 LOG5 begin_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2008-Jul-25 01:41:39 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Jul-25 01:41:39 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jul-25 01:41:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 01:41:39 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jul-25 01:41:39 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Jul-25 01:41:39 LOG5 end_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2008-Jul-25 01:41:39 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Jul-25 01:41:39 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jul-25 01:41:39 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Jul-25 01:41:39 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jul-25 01:41:39 LOG5 begin_task: Level: (3) ID = <10023> Status = 0 0 0 0 ok 2008-Jul-25 01:41:39 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jul-25 01:41:39 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jul-25 01:41:39 LOG5 end_task: Level: (3) ID = <10023> Status = 0 0 0 0 ok 2008-Jul-25 01:41:39 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jul-25 01:41:39 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Jul-25 01:41:39 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jul-25 01:41:39 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Jul-25 01:41:39 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jul-25 01:41:39 LOG5 begin_task: Level: (3) ID = <10024> Status = 0 0 0 0 ok 2008-Jul-25 01:41:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 01:41:39 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jul-25 01:41:39 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jul-25 01:41:39 LOG5 end_task: Level: (3) ID = <10024> Status = 0 0 0 0 ok 2008-Jul-25 01:41:39 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jul-25 01:41:39 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Jul-25 01:41:39 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Jul-25 01:41:39 LOG5 end_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2008-Jul-25 01:41:39 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 JID 2008-Jul-25 01:41:39 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 JID 2008-Jul-25 01:41:39 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 JID 2008-Jul-25 01:41:39 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 JID 2008-Jul-25 01:41:39 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20080725.a2048.0000.fits' is empty! 2008-Jul-25 01:41:39 INFO2 onoff_wapp: Starting standard on/off loop 1 of 1 2008-Jul-25 01:41:39 LOG4 send_obs_status: To obs_status: <1> LOOP 1 TOTALPARTS 2 PART 1 INFO {Making ON observation followed by OFF} 2008-Jul-25 01:41:40 START begin_task: Starting task 'clearing telescope offsets' 2008-Jul-25 01:41:40 LOG5 begin_task: Level: (2) ID = <10025> Status = 0 0 0 0 ok 2008-Jul-25 01:41:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Clearing Telescope Offsets} INFO {Removing telescope offsets ...} 2008-Jul-25 01:41:40 INFO3 clear_offsets: Removing telescope offsets 2008-Jul-25 01:41:40 LOG3 vw_send: To DATATAKING: hdrldsrcnm "J223237+231205" 2008-Jul-25 01:41:40 LOG3 vw_send: To DATATAKING: pnt tr 223237.000000 231205.000000 -CJ 2008-Jul-25 01:41:40 STOP finish_task: Finishing task 'clearing telescope offsets' 2008-Jul-25 01:41:40 LOG5 finish_task: Level: (2) ID = <10025> Status = 0 0 0 0 ok 2008-Jul-25 01:41:40 INFO2 finish_task: DONE finished clearing: telescope offsets 2008-Jul-25 01:41:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-25 01:41:40 STOP end_task: Finishing task 'clearing telescope offsets' with status 'OK' 2008-Jul-25 01:41:40 LOG5 end_task: Level: (2) ID = <10025> Status = 0 0 0 0 ok 2008-Jul-25 01:41:40 START begin_task: Starting task 'waiting on telescope' 2008-Jul-25 01:41:40 LOG5 begin_task: Level: (2) ID = <10026> Status = 0 0 0 0 ok 2008-Jul-25 01:41:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Jul-25 01:41:40 LOG3 waittrk: Start waittrk 5 2008-Jul-25 01:41:40 START begin_task: Starting task 'waiting on telescope movement' 2008-Jul-25 01:41:40 LOG5 begin_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2008-Jul-25 01:41:40 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "J223237+231205" 2008-Jul-25 01:41:40 LOG4 got_cormsg: From DATATAKING: pnt tr 223237.000000 231205.000000 -CJ 2008-Jul-25 01:41:40 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Jul-25 01:41:40 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 JID' 2008-Jul-25 01:41:45 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Jul-25 01:41:45 LOG5 end_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2008-Jul-25 01:41:45 START begin_task: Starting task 'waiting on telescope on source' 2008-Jul-25 01:41:45 LOG5 begin_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2008-Jul-25 01:41:47 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Jul-25 01:41:47 LOG5 end_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2008-Jul-25 01:41:47 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Jul-25 01:41:47 INFO2 waittrk: Now tracking J223237+231205 2008-Jul-25 01:41:47 LOG4 waittrk: Current telescope position: Az = 608.96 ZA = 15.97 2008-Jul-25 01:41:47 STOP finish_task: Finishing task 'waiting on telescope' 2008-Jul-25 01:41:47 LOG5 finish_task: Level: (2) ID = <10026> Status = 0 0 0 0 ok 2008-Jul-25 01:41:47 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Jul-25 01:41:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-25 01:41:47 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Jul-25 01:41:47 LOG5 end_task: Level: (2) ID = <10026> Status = 0 0 0 0 ok 2008-Jul-25 01:41:47 LOG5 antvel: Calling 'antvel 223237.000000 231205.000000 J 0' 2008-Jul-25 01:41:47 LOG2 antvel: Precessing RA = 22:32:37.0 Dec = +23:12:05.0 Epoch = 2008.56693 J 2008-Jul-25 01:41:47 LOG2 antvel: Computed apparent RA = 22:33:03.2 Dec = +23:14:45.9 2008-Jul-25 01:41:47 LOG2 antvel: Parameters to Doppler: Topocentric 20507 2008 207 0.0 2008-Jul-25 01:41:47 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Jul-25 01:41:47 LOG3 dopset_gen: Parameters for 'rest2sky': vel=16619.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Jul-25 01:41:47 INFO4 dopset_gen: New sky frequencies: 1345.801237 1345.801237 1345.801237 1345.801237 1345.801237 1345.801237 1345.801237 1345.801237 1345.801237 2008-Jul-25 01:41:47 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1345.801237 sky0=1345.801237 sky1=1345.801237 sky2=1345.801237 sky3=1345.801237 sky4=1345.801237 sky5=1345.801237 sky6=1345.801237 sky7=1345.801237 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jul-25 01:41:47 LOG2 dopset_gen: Result from 'sky2syn': 1595.801237 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jul-25 01:41:47 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1595801237.0} 2008-Jul-25 01:41:47 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 01:41:47 START begin_task: Starting task 'adjusting WAPP power' 2008-Jul-25 01:41:47 LOG5 begin_task: Level: (2) ID = <10029> Status = 0 0 0 0 ok 2008-Jul-25 01:41:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Jul-25 01:41:47 INFO2 adjust_power: Starting to adjust WAPP power 2008-Jul-25 01:41:47 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Jul-25 01:41:47 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Jul-25 01:41:47 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jul-25 01:41:47 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Jul-25 01:41:47 LOG5 begin_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2008-Jul-25 01:41:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1595801237.0} 2008-Jul-25 01:41:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 01:41:47 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Jul-25 01:41:47 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jul-25 01:41:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 01:41:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 01:41:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 01:41:50 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jul-25 01:41:50 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Jul-25 01:41:50 LOG5 end_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2008-Jul-25 01:41:50 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Jul-25 01:41:50 START begin_task: Starting task 'adjusting WAPP power' 2008-Jul-25 01:41:50 LOG5 begin_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2008-Jul-25 01:41:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Jul-25 01:41:50 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Jul-25 01:41:50 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Jul-25 01:41:50 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Jul-25 01:41:50 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Jul-25 01:41:50 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Jul-25 01:41:50 LOG5 begin_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2008-Jul-25 01:41:51 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Jul-25 01:41:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 01:41:51 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 0 0 dB --- beam 1: 0 0 dB 2008-Jul-25 01:41:51 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 0 dB --- beam 5: 0 0 dB 2008-Jul-25 01:41:51 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 0 0 dB --- beam 3: 0 0 dB 2008-Jul-25 01:41:51 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 0 0 dB --- beam 7: 0 0 dB 2008-Jul-25 01:41:51 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Jul-25 01:41:51 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Jul-25 01:41:51 LOG5 end_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2008-Jul-25 01:41:51 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.022 0.018 ALFA beam 1: 0.089 0.036 2008-Jul-25 01:41:51 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.019 0.014 ALFA beam 3: 0.014 0.014 2008-Jul-25 01:41:51 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.014 0.014 ALFA beam 5: 0.026 0.014 2008-Jul-25 01:41:51 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.039 0.030 ALFA beam 7: 0.034 0.033 2008-Jul-25 01:41:51 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Jul-25 01:41:51 LOG5 finish_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2008-Jul-25 01:41:51 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Jul-25 01:41:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-25 01:41:51 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Jul-25 01:41:51 LOG5 end_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2008-Jul-25 01:41:51 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Jul-25 01:41:51 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Jul-25 01:41:51 LOG5 finish_task: Level: (2) ID = <10029> Status = 0 0 0 0 ok 2008-Jul-25 01:41:51 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Jul-25 01:41:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-25 01:41:51 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Jul-25 01:41:51 LOG5 end_task: Level: (2) ID = <10029> Status = 0 0 0 0 ok 2008-Jul-25 01:41:51 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_onoff_on MESSAGE {Taking ON scan ...} 2008-Jul-25 01:41:51 LOG4 take_data: Calling 'take_data 300 1 ONOFF ON -' 2008-Jul-25 01:41:51 START begin_task: Starting task 'WAPP spectral observation' 2008-Jul-25 01:41:51 LOG5 begin_task: Level: (2) ID = <10033> Status = 0 0 0 0 ok 2008-Jul-25 01:41:52 LOG5 log_alfabeam: Parameters: 22.543611111111112 23.201388888888889 21.467630 2008.566928758841 -57.000019 2008-Jul-25 01:41:52 LOG4 log_alfabeam: ALFABEAM 0 22.543611111111108 23.201388888888896 2008-Jul-25 01:41:52 LOG4 log_alfabeam: ALFABEAM 1 22.544893670341402 23.111680965977087 2008-Jul-25 01:41:52 LOG4 log_alfabeam: ALFABEAM 2 22.550805873038918 23.175821958140883 2008-Jul-25 01:41:52 LOG4 log_alfabeam: ALFABEAM 3 22.549500358446760 23.266008166010344 2008-Jul-25 01:41:52 LOG4 log_alfabeam: ALFABEAM 4 22.542289946269381 23.291024386281261 2008-Jul-25 01:41:52 LOG4 log_alfabeam: ALFABEAM 5 22.536413108219762 23.226317231153892 2008-Jul-25 01:41:52 LOG4 log_alfabeam: ALFABEAM 6 22.537711224633963 23.137159293943093 2008-Jul-25 01:41:52 INFO2 take_data: Starting WAPP scan: 820700001 2008-Jul-25 01:41:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 300 2008-Jul-25 01:41:52 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jul-25 01:41:52 LOG5 begin_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2008-Jul-25 01:41:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jul-25 01:41:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20513.00 2008-Jul-25 01:41:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1595.801237 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jul-25 01:41:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1345.801237 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 01:41:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1345.801237 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 01:41:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1345.801237 MHz Flip = 1 Band = 0 Mixer = 944.589620 MHz 2008-Jul-25 01:41:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1345.801237 MHz Flip = 1 Band = 0 Mixer = 942.632164 MHz 2008-Jul-25 01:41:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1345.801237 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Jul-25 01:41:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1345.801237 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Jul-25 01:41:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1345.801237 MHz Flip = 1 Band = 0 Mixer = 1978.000000 MHz 2008-Jul-25 01:41:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1345.801237 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2008-Jul-25 01:41:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 01:41:54 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 0.089 0.036 2008-Jul-25 01:41:54 LOG4 check_wapp_levels: WAPP-2 power levels: 0.019 0.014 0.014 0.014 2008-Jul-25 01:41:54 LOG4 check_wapp_levels: WAPP-3 power levels: 0.014 0.014 0.026 0.014 2008-Jul-25 01:41:54 LOG4 check_wapp_levels: WAPP-4 power levels: 0.039 0.030 0.034 0.033 2008-Jul-25 01:41:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:41:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:42:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:42:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:42:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:42:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:42:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:42:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:42:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:42:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:42:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:42:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:42:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:42:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:42:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:42:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:42:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:42:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:42:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:42:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:42:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:42:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:42:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:42:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:42:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:42:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:42:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:42:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:42:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:42:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:42:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 01:42:56 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 0.089 0.036 2008-Jul-25 01:42:56 LOG4 check_wapp_levels: WAPP-2 power levels: 0.019 0.014 0.014 0.014 2008-Jul-25 01:42:56 LOG4 check_wapp_levels: WAPP-3 power levels: 0.014 0.014 0.026 0.014 2008-Jul-25 01:42:56 LOG4 check_wapp_levels: WAPP-4 power levels: 0.039 0.030 0.034 0.033 2008-Jul-25 01:42:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:43:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:43:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:43:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:43:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:43:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:43:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:43:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:43:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:43:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:43:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:43:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:43:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:43:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:43:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:43:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:43:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:43:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:43:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:43:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:43:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:43:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:43:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:43:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:43:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:43:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:43:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:43:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:43:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:43:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 01:43:57 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 0.089 0.036 2008-Jul-25 01:43:57 LOG4 check_wapp_levels: WAPP-2 power levels: 0.019 0.014 0.014 0.014 2008-Jul-25 01:43:57 LOG4 check_wapp_levels: WAPP-3 power levels: 0.014 0.014 0.026 0.014 2008-Jul-25 01:43:57 LOG4 check_wapp_levels: WAPP-4 power levels: 0.039 0.030 0.034 0.034 2008-Jul-25 01:43:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:44:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:44:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:44:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:44:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:44:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:44:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:44:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:44:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:44:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:44:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:44:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:44:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:44:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:44:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:44:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:44:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:44:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:44:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:44:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:44:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:44:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:44:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:44:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:44:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:44:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:44:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:44:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:44:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:44:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 01:44:58 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 0.089 0.036 2008-Jul-25 01:44:58 LOG4 check_wapp_levels: WAPP-2 power levels: 0.019 0.014 0.014 0.014 2008-Jul-25 01:44:58 LOG4 check_wapp_levels: WAPP-3 power levels: 0.014 0.014 0.026 0.014 2008-Jul-25 01:44:58 LOG4 check_wapp_levels: WAPP-4 power levels: 0.039 0.030 0.034 0.034 2008-Jul-25 01:45:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:45:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:45:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:45:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:45:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:45:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:45:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:45:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:45:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:45:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:45:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:45:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:45:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:45:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:45:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:45:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:45:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:45:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:45:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:45:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:45:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:45:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:45:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:45:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:45:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:45:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:45:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:45:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:45:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:45:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 01:45:59 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 0.089 0.036 2008-Jul-25 01:45:59 LOG4 check_wapp_levels: WAPP-2 power levels: 0.019 0.014 0.014 0.014 2008-Jul-25 01:45:59 LOG4 check_wapp_levels: WAPP-3 power levels: 0.014 0.014 0.026 0.014 2008-Jul-25 01:45:59 LOG4 check_wapp_levels: WAPP-4 power levels: 0.039 0.030 0.034 0.034 2008-Jul-25 01:46:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:46:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:46:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:46:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:46:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:46:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:46:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:46:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:46:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:46:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:46:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:46:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:46:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:46:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:46:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:46:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:46:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:46:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:46:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:46:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:46:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:46:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:46:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:46:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:46:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:46:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:46:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jul-25 01:46:53 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jul-25 01:46:53 LOG5 end_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2008-Jul-25 01:46:53 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jul-25 01:46:53 LOG5 end_task: Level: (2) ID = <10033> Status = 0 0 0 0 ok 2008-Jul-25 01:46:53 LOG4 send_obs_status: To obs_status: <1> PART 2 INFO {Waiting for OFF observation followed by CAL} 2008-Jul-25 01:46:53 LOG2 onoff_wapp: Parameters: RA-offset: -90.707100000001049 arcminutes wait: 60 secs 2008-Jul-25 01:46:53 LOG4 track_offsets: Calling 'track_offsets -90.707100000001049 0.0 main small' 2008-Jul-25 01:46:53 START begin_task: Starting task 'sending telescope offsets' 2008-Jul-25 01:46:53 LOG5 begin_task: Level: (2) ID = <10035> Status = 0 0 0 0 ok 2008-Jul-25 01:46:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Telescope Offsets} INFO {Changing telescope offsets ...} 2008-Jul-25 01:46:53 INFO2 track_offsets: Starting to send new offsets 2008-Jul-25 01:46:53 LOG3 vw_send: To DATATAKING: hdrldsrcnm "J223237+231205" 2008-Jul-25 01:46:53 LOG3 vw_send: To DATATAKING: pnt tr 223237.000000 231205.000000 -CJ -o -UD -1.51179 0.0 -CH 2008-Jul-25 01:46:53 STOP finish_task: Finishing task 'sending telescope offsets' 2008-Jul-25 01:46:53 LOG5 finish_task: Level: (2) ID = <10035> Status = 0 0 0 0 ok 2008-Jul-25 01:46:53 INFO2 finish_task: DONE finished sending: telescope offsets 2008-Jul-25 01:46:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-25 01:46:53 STOP end_task: Finishing task 'sending telescope offsets' with status 'OK' 2008-Jul-25 01:46:53 LOG5 end_task: Level: (2) ID = <10035> Status = 0 0 0 0 ok 2008-Jul-25 01:46:53 INFO2 lstwait: Waiting for 59.8 secs from LST 21:33:06 to LST 21:34:06 ... 2008-Jul-25 01:46:53 LOG4 send_obs_status: To obs_status: <1> TASKTIME 59.836175999996598 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Jul-25 01:46:53 START begin_task: Starting task 'waiting on wait on LST' 2008-Jul-25 01:46:53 LOG5 begin_task: Level: (2) ID = <10036> Status = 0 0 0 0 ok 2008-Jul-25 01:46:53 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "J223237+231205" 2008-Jul-25 01:46:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:46:53 LOG4 got_cormsg: From DATATAKING: pnt tr 223237.000000 231205.000000 -CJ -o -UD -1.51179 0.0 -CH 2008-Jul-25 01:46:53 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Jul-25 01:47:32 INFO4 wait_and_tell_when_on_source: Telescope is now on source 'J223237+231205' (after 39 seconds) 2008-Jul-25 01:47:53 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Jul-25 01:47:53 LOG5 end_task: Level: (2) ID = <10036> Status = 0 0 0 0 ok 2008-Jul-25 01:47:53 LOG4 lstwait: Finished waiting 0.16 seconds late 2008-Jul-25 01:47:53 INFO3 lstwait: Finished waiting 2008-Jul-25 01:47:53 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Jul-25 01:47:53 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_onoff_off MESSAGE {Taking OFF scan ...} 2008-Jul-25 01:47:53 LOG4 take_data: Calling 'take_data 300 1 ONOFF OFF -' 2008-Jul-25 01:47:53 START begin_task: Starting task 'WAPP spectral observation' 2008-Jul-25 01:47:53 LOG5 begin_task: Level: (2) ID = <10037> Status = 0 0 0 0 ok 2008-Jul-25 01:47:53 LOG5 log_alfabeam: Parameters: 22.543611111111112 23.201388888888889 21.568461 2008.5669402299288 -57.000019 2008-Jul-25 01:47:53 LOG4 log_alfabeam: ALFABEAM 0 22.543611111111108 23.201388888888896 2008-Jul-25 01:47:53 LOG4 log_alfabeam: ALFABEAM 1 22.545116431974165 23.112343329426320 2008-Jul-25 01:47:53 LOG4 log_alfabeam: ALFABEAM 2 22.550865922824627 23.179246923002193 2008-Jul-25 01:47:53 LOG4 log_alfabeam: ALFABEAM 3 22.549333566453090 23.268803262126408 2008-Jul-25 01:47:53 LOG4 log_alfabeam: ALFABEAM 4 22.542063568032649 23.290335124721921 2008-Jul-25 01:47:53 LOG4 log_alfabeam: ALFABEAM 5 22.536354917369657 23.222836769848630 2008-Jul-25 01:47:53 LOG4 log_alfabeam: ALFABEAM 6 22.537875325249377 23.134400361943204 2008-Jul-25 01:47:53 INFO2 take_data: Starting WAPP scan: 820700002 2008-Jul-25 01:47:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 300 2008-Jul-25 01:47:54 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jul-25 01:47:54 LOG5 begin_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2008-Jul-25 01:47:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jul-25 01:47:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20875.00 2008-Jul-25 01:47:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1595.801237 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jul-25 01:47:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1345.801237 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 01:47:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1345.801237 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 01:47:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1345.801237 MHz Flip = 1 Band = 0 Mixer = 944.589620 MHz 2008-Jul-25 01:47:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1345.801237 MHz Flip = 1 Band = 0 Mixer = 942.632164 MHz 2008-Jul-25 01:47:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1345.801237 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Jul-25 01:47:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1345.801237 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Jul-25 01:47:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1345.801237 MHz Flip = 1 Band = 0 Mixer = 1978.000000 MHz 2008-Jul-25 01:47:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1345.801237 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2008-Jul-25 01:47:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 01:47:56 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 0.089 0.036 2008-Jul-25 01:47:56 LOG4 check_wapp_levels: WAPP-2 power levels: 0.019 0.014 0.014 0.014 2008-Jul-25 01:47:56 LOG4 check_wapp_levels: WAPP-3 power levels: 0.014 0.014 0.026 0.014 2008-Jul-25 01:47:56 LOG4 check_wapp_levels: WAPP-4 power levels: 0.039 0.030 0.034 0.034 2008-Jul-25 01:47:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:48:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:48:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:48:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:48:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:48:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:48:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:48:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:48:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:48:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:48:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:48:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:48:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:48:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:48:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:48:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:48:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:48:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:48:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:48:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:48:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:48:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:48:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:48:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:48:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:48:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:48:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:48:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:48:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:48:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 01:48:57 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 0.089 0.036 2008-Jul-25 01:48:57 LOG4 check_wapp_levels: WAPP-2 power levels: 0.019 0.014 0.014 0.014 2008-Jul-25 01:48:57 LOG4 check_wapp_levels: WAPP-3 power levels: 0.014 0.014 0.026 0.014 2008-Jul-25 01:48:57 LOG4 check_wapp_levels: WAPP-4 power levels: 0.039 0.030 0.034 0.034 2008-Jul-25 01:48:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:49:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:49:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:49:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:49:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:49:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:49:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:49:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:49:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:49:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:49:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:49:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:49:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:49:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:49:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:49:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:49:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:49:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:49:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:49:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:49:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:49:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:49:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:49:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:49:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:49:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:49:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:49:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:49:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:49:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:49:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 01:49:59 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 0.089 0.036 2008-Jul-25 01:49:59 LOG4 check_wapp_levels: WAPP-2 power levels: 0.019 0.014 0.014 0.014 2008-Jul-25 01:49:59 LOG4 check_wapp_levels: WAPP-3 power levels: 0.014 0.014 0.026 0.014 2008-Jul-25 01:49:59 LOG4 check_wapp_levels: WAPP-4 power levels: 0.040 0.030 0.034 0.034 2008-Jul-25 01:50:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:50:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:50:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:50:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:50:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:50:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:50:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:50:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:50:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:50:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:50:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:50:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:50:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:50:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:50:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:50:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:50:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:50:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:50:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:50:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:50:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:50:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:50:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:50:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:50:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:50:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:50:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:50:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:50:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:51:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 01:51:00 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 0.089 0.036 2008-Jul-25 01:51:00 LOG4 check_wapp_levels: WAPP-2 power levels: 0.019 0.014 0.014 0.014 2008-Jul-25 01:51:00 LOG4 check_wapp_levels: WAPP-3 power levels: 0.014 0.014 0.026 0.014 2008-Jul-25 01:51:00 LOG4 check_wapp_levels: WAPP-4 power levels: 0.040 0.030 0.034 0.034 2008-Jul-25 01:51:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:51:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:51:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:51:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:51:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:51:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:51:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:51:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:51:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:51:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:51:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:51:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:51:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:51:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:51:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:51:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:51:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:51:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:51:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:51:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:51:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:51:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:51:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:51:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:51:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:51:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:51:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:51:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:51:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:52:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 01:52:01 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 0.089 0.036 2008-Jul-25 01:52:01 LOG4 check_wapp_levels: WAPP-2 power levels: 0.019 0.014 0.014 0.014 2008-Jul-25 01:52:01 LOG4 check_wapp_levels: WAPP-3 power levels: 0.014 0.014 0.026 0.014 2008-Jul-25 01:52:01 LOG4 check_wapp_levels: WAPP-4 power levels: 0.039 0.030 0.034 0.034 2008-Jul-25 01:52:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:52:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:52:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:52:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:52:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:52:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:52:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:52:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:52:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:52:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:52:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:52:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:52:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:52:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:52:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:52:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:52:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:52:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:52:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:52:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:52:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:52:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:52:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:52:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:52:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:52:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:52:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jul-25 01:52:55 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jul-25 01:52:55 LOG5 end_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2008-Jul-25 01:52:55 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jul-25 01:52:55 LOG5 end_task: Level: (2) ID = <10037> Status = 0 0 0 0 ok 2008-Jul-25 01:52:55 LOG2 take_cal: Calling 'take_cal hcorcal 10 0' 2008-Jul-25 01:52:55 START begin_task: Starting task 'WAPP calibration' 2008-Jul-25 01:52:55 LOG5 begin_task: Level: (2) ID = <10039> Status = 0 0 0 0 ok 2008-Jul-25 01:52:55 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Jul-25 01:52:55 START begin_task: Starting task 'selecting calibration type' 2008-Jul-25 01:52:55 LOG5 begin_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2008-Jul-25 01:52:55 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Jul-25 01:52:55 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Jul-25 01:52:55 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jul-25 01:52:55 START begin_task: Starting task 'waiting on setcal' 2008-Jul-25 01:52:55 LOG5 begin_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2008-Jul-25 01:52:55 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Jul-25 01:52:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:52:55 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jul-25 01:52:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 01:52:56 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jul-25 01:52:56 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Jul-25 01:52:56 LOG5 end_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2008-Jul-25 01:52:56 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Jul-25 01:52:56 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jul-25 01:52:56 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Jul-25 01:52:56 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jul-25 01:52:56 LOG5 begin_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2008-Jul-25 01:52:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 01:52:56 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jul-25 01:52:56 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jul-25 01:52:56 LOG5 end_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2008-Jul-25 01:52:56 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jul-25 01:52:56 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Jul-25 01:52:56 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jul-25 01:52:56 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Jul-25 01:52:56 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jul-25 01:52:56 LOG5 begin_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2008-Jul-25 01:52:56 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jul-25 01:52:56 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jul-25 01:52:56 LOG5 end_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2008-Jul-25 01:52:56 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jul-25 01:52:56 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Jul-25 01:52:56 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Jul-25 01:52:56 LOG5 end_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2008-Jul-25 01:52:56 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Jul-25 01:52:56 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Jul-25 01:52:56 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Jul-25 01:52:56 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jul-25 01:52:56 LOG5 begin_task: Level: (3) ID = <10044> Status = 0 0 0 0 ok 2008-Jul-25 01:52:56 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jul-25 01:52:56 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Jul-25 01:52:56 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jul-25 01:52:56 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jul-25 01:52:56 LOG5 end_task: Level: (3) ID = <10044> Status = 0 0 0 0 ok 2008-Jul-25 01:52:56 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Jul-25 01:52:56 LOG4 take_data: Calling 'take_data 10 10 CAL ON -' 2008-Jul-25 01:52:56 START begin_task: Starting task 'WAPP spectral observation' 2008-Jul-25 01:52:56 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2008-Jul-25 01:52:56 LOG5 log_alfabeam: Parameters: 22.543611111111112 23.201388888888889 21.652858 2008.5669498314194 -57.000019 2008-Jul-25 01:52:56 LOG4 log_alfabeam: ALFABEAM 0 22.543611111111115 23.201388888888896 2008-Jul-25 01:52:56 LOG4 log_alfabeam: ALFABEAM 1 22.545330069155952 23.113083592099859 2008-Jul-25 01:52:56 LOG4 log_alfabeam: ALFABEAM 2 22.550915826816624 23.182583008928315 2008-Jul-25 01:52:56 LOG4 log_alfabeam: ALFABEAM 3 22.549165677041586 23.271427760525100 2008-Jul-25 01:52:56 LOG4 log_alfabeam: ALFABEAM 4 22.541846500961761 23.289565552905923 2008-Jul-25 01:52:56 LOG4 log_alfabeam: ALFABEAM 5 22.536307081717300 23.219447532167941 2008-Jul-25 01:52:56 LOG4 log_alfabeam: ALFABEAM 6 22.538040395393534 23.131809129347538 2008-Jul-25 01:52:56 INFO2 take_data: Starting WAPP scan: 820700003 2008-Jul-25 01:52:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jul-25 01:52:56 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jul-25 01:52:56 LOG5 begin_task: Level: (4) ID = <10046> Status = 0 0 0 0 ok 2008-Jul-25 01:52:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jul-25 01:52:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21177.00 2008-Jul-25 01:53:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1595.801237 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jul-25 01:53:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1345.801237 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 01:53:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1345.801237 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 01:53:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1345.801237 MHz Flip = 1 Band = 0 Mixer = 944.589620 MHz 2008-Jul-25 01:53:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1345.801237 MHz Flip = 1 Band = 0 Mixer = 942.632164 MHz 2008-Jul-25 01:53:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1345.801237 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Jul-25 01:53:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1345.801237 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Jul-25 01:53:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1345.801237 MHz Flip = 1 Band = 0 Mixer = 1978.000000 MHz 2008-Jul-25 01:53:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1345.801237 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2008-Jul-25 01:53:07 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jul-25 01:53:07 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jul-25 01:53:07 LOG5 end_task: Level: (4) ID = <10046> Status = 0 0 0 0 ok 2008-Jul-25 01:53:07 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jul-25 01:53:07 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2008-Jul-25 01:53:07 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Jul-25 01:53:07 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Jul-25 01:53:07 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Jul-25 01:53:07 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jul-25 01:53:07 LOG5 begin_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2008-Jul-25 01:53:07 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jul-25 01:53:07 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jul-25 01:53:07 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jul-25 01:53:07 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jul-25 01:53:07 LOG5 end_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2008-Jul-25 01:53:07 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Jul-25 01:53:07 LOG4 take_data: Calling 'take_data 10 10 CAL OFF -' 2008-Jul-25 01:53:07 START begin_task: Starting task 'WAPP spectral observation' 2008-Jul-25 01:53:07 LOG5 begin_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2008-Jul-25 01:53:07 LOG5 log_alfabeam: Parameters: 22.543611111111112 23.201388888888889 21.655922 2008.5669501799885 -57.000019 2008-Jul-25 01:53:07 LOG4 log_alfabeam: ALFABEAM 0 22.543611111111108 23.201388888888896 2008-Jul-25 01:53:07 LOG4 log_alfabeam: ALFABEAM 1 22.545338365898811 23.113114449886218 2008-Jul-25 01:53:07 LOG4 log_alfabeam: ALFABEAM 2 22.550917610454356 23.182713600518358 2008-Jul-25 01:53:07 LOG4 log_alfabeam: ALFABEAM 3 22.549158997885833 23.271528553298257 2008-Jul-25 01:53:07 LOG4 log_alfabeam: ALFABEAM 4 22.541838072155368 23.289533486779579 2008-Jul-25 01:53:07 LOG4 log_alfabeam: ALFABEAM 5 22.536305384148740 23.219314883214619 2008-Jul-25 01:53:07 LOG4 log_alfabeam: ALFABEAM 6 22.538046960413908 23.131709595625050 2008-Jul-25 01:53:07 INFO2 take_data: Starting WAPP scan: 820700004 2008-Jul-25 01:53:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jul-25 01:53:08 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jul-25 01:53:08 LOG5 begin_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2008-Jul-25 01:53:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jul-25 01:53:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 01:53:08 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 0.089 0.036 2008-Jul-25 01:53:08 LOG4 check_wapp_levels: WAPP-2 power levels: 0.019 0.014 0.014 0.014 2008-Jul-25 01:53:08 LOG4 check_wapp_levels: WAPP-3 power levels: 0.014 0.014 0.026 0.014 2008-Jul-25 01:53:08 LOG4 check_wapp_levels: WAPP-4 power levels: 0.039 0.030 0.034 0.034 2008-Jul-25 01:53:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21189.00 2008-Jul-25 01:53:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1595.801237 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jul-25 01:53:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1345.801237 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 01:53:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1345.801237 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 01:53:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1345.801237 MHz Flip = 1 Band = 0 Mixer = 944.589620 MHz 2008-Jul-25 01:53:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1345.801237 MHz Flip = 1 Band = 0 Mixer = 942.632164 MHz 2008-Jul-25 01:53:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1345.801237 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Jul-25 01:53:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1345.801237 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Jul-25 01:53:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1345.801237 MHz Flip = 1 Band = 0 Mixer = 1978.000000 MHz 2008-Jul-25 01:53:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1345.801237 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2008-Jul-25 01:53:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:53:19 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Jul-25 01:53:19 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jul-25 01:53:19 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jul-25 01:53:19 LOG5 end_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2008-Jul-25 01:53:19 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jul-25 01:53:19 LOG5 end_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2008-Jul-25 01:53:19 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Jul-25 01:53:19 STOP finish_task: Finishing task 'WAPP calibration' 2008-Jul-25 01:53:19 LOG5 finish_task: Level: (2) ID = <10039> Status = 0 0 0 0 ok 2008-Jul-25 01:53:19 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Jul-25 01:53:19 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-25 01:53:19 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Jul-25 01:53:19 LOG5 end_task: Level: (2) ID = <10039> Status = 0 0 0 0 ok 2008-Jul-25 01:53:19 START begin_task: Starting task 'clearing telescope offsets' 2008-Jul-25 01:53:19 LOG5 begin_task: Level: (2) ID = <10050> Status = 0 0 0 0 ok 2008-Jul-25 01:53:19 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Clearing Telescope Offsets} INFO {Removing telescope offsets ...} 2008-Jul-25 01:53:19 INFO3 clear_offsets: Removing telescope offsets 2008-Jul-25 01:53:19 LOG3 vw_send: To DATATAKING: hdrldsrcnm "J223237+231205" 2008-Jul-25 01:53:19 LOG3 vw_send: To DATATAKING: pnt tr 223237.000000 231205.000000 -CJ 2008-Jul-25 01:53:19 STOP finish_task: Finishing task 'clearing telescope offsets' 2008-Jul-25 01:53:19 LOG5 finish_task: Level: (2) ID = <10050> Status = 0 0 0 0 ok 2008-Jul-25 01:53:19 INFO2 finish_task: DONE finished clearing: telescope offsets 2008-Jul-25 01:53:19 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-25 01:53:20 STOP end_task: Finishing task 'clearing telescope offsets' with status 'OK' 2008-Jul-25 01:53:20 LOG5 end_task: Level: (2) ID = <10050> Status = 0 0 0 0 ok 2008-Jul-25 01:53:20 STOP finish_task: Finishing task 'standard on/off' 2008-Jul-25 01:53:20 LOG5 finish_task: Level: (1) ID = <10017> Status = 0 0 0 0 ok 2008-Jul-25 01:53:20 DONE finish_task: DONE finished pattern: standard on/off 2008-Jul-25 01:53:20 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Jul-25 01:53:20 END end_task: Finishing task 'standard on/off' with status 'OK' 2008-Jul-25 01:53:20 LOG5 end_task: Level: (1) ID = <10017> Status = 0 0 0 0 ok 2008-Jul-25 01:53:20 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "J223237+231205" 2008-Jul-25 01:53:20 LOG4 got_cormsg: From DATATAKING: pnt tr 223237.000000 231205.000000 -CJ 2008-Jul-25 01:53:20 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Jul-25 01:53:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 0.089 (still bad) 2008-Jul-25 01:54:59 INFO1 CIMA-run_command_file: Transferring command file 'command_galfasrc.cmd ' to executive ... 2008-Jul-25 01:54:59 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 5 {LOAD togs_ages.conf} 2008-Jul-25 01:54:59 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 6 {CATALOG togs_ages.cat} 2008-Jul-25 01:54:59 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {GOTO galfasrc} 2008-Jul-25 01:54:59 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {ALFAANGLE 19} 2008-Jul-25 01:54:59 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {WAITTRACK} 2008-Jul-25 01:54:59 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 13 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2008-Jul-25 01:54:59 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-Jul-25 01:54:59 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc.cmd 1 1 6 2008-Jul-25 01:54:59 LOG4 run_command_file: Calling 'run_command_file command_galfasrc.cmd 1 1 6' 2008-Jul-25 01:54:59 BEGIN begin_task: Starting task 'running command file 'command_galfasrc.cmd'' 2008-Jul-25 01:54:59 LOG5 begin_task: Level: (1) ID = <10051> Status = 0 0 0 0 ok 2008-Jul-25 01:54:59 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc.cmd' ...} 2008-Jul-25 01:55:00 NOTE run_command_file: Starting execution of command file 'command_galfasrc.cmd' from line 1 2008-Jul-25 01:55:00 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_ages.conf' 2008-Jul-25 01:55:00 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2008-Jul-25 01:55:00 NOTE CIMA-check_config_file: File 'togs_ages.conf' contains a observing mode set-up which will be ignored! 2008-Jul-25 01:55:00 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Jul-25 01:55:00 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2008-Jul-25 01:55:00 NOTE CIMA-load_config_file: Loading configuration file 'togs_ages.conf' 2008-Jul-25 01:55:00 INFO4 CIMA-antvel: Computed apparent RA = 22:33:03.2 Dec = +23:14:45.9 from RA = 22:32:37.0 Dec = +23:12:05.0 Epoch = 2008.56695 J 2008-Jul-25 01:55:00 INFO4 CIMA-antvel: Parameters to Doppler: Topocentric 21299.0 2008 207 0 2008-Jul-25 01:55:00 INFO3 CIMA-antvel: Computed velocity correction 0.0000000000 2008-Jul-25 01:55:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Jul-25 01:55:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Jul-25 01:55:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Jul-25 01:55:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Jul-25 01:55:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Jul-25 01:55:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2008-Jul-25 01:55:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Jul-25 01:55:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1381.2" 2008-Jul-25 01:55:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1381.2" 2008-Jul-25 01:55:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1381.2" 2008-Jul-25 01:55:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1381.2" 2008-Jul-25 01:55:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1381.2" 2008-Jul-25 01:55:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1381.2" 2008-Jul-25 01:55:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1381.2" 2008-Jul-25 01:55:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1381.2" 2008-Jul-25 01:55:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1381.2" 2008-Jul-25 01:55:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Jul-25 01:55:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Jul-25 01:55:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Jul-25 01:55:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Jul-25 01:55:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Jul-25 01:55:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Jul-25 01:55:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Jul-25 01:55:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Jul-25 01:55:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Jul-25 01:55:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Jul-25 01:55:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Jul-25 01:55:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Jul-25 01:55:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Jul-25 01:55:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2008-Jul-25 01:55:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Jul-25 01:55:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Jul-25 01:55:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Jul-25 01:55:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Jul-25 01:55:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Jul-25 01:55:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Jul-25 01:55:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Jul-25 01:55:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Jul-25 01:55:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Jul-25 01:55:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1558.654704" 2008-Jul-25 01:55:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Jul-25 01:55:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Jul-25 01:55:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Jul-25 01:55:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Jul-25 01:55:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Jul-25 01:55:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Jul-25 01:55:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Jul-25 01:55:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Jul-25 01:55:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Jul-25 01:55:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Jul-25 01:55:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Jul-25 01:55:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Jul-25 01:55:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Jul-25 01:55:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Jul-25 01:55:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Jul-25 01:55:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Jul-25 01:55:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Jul-25 01:55:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Jul-25 01:55:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Jul-25 01:55:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Jul-25 01:55:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Jul-25 01:55:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Jul-25 01:55:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Jul-25 01:55:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Jul-25 01:55:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Jul-25 01:55:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Jul-25 01:55:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Jul-25 01:55:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Jul-25 01:55:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Jul-25 01:55:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Jul-25 01:55:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Jul-25 01:55:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Jul-25 01:55:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Jul-25 01:55:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Jul-25 01:55:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Jul-25 01:55:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Jul-25 01:55:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Jul-25 01:55:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Jul-25 01:55:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Jul-25 01:55:02 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Jul-25 01:55:02 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Jul-25 01:55:02 LOG5 begin_task: Level: (2) ID = <10052> Status = 0 0 0 0 ok 2008-Jul-25 01:55:02 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Jul-25 01:55:02 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Jul-25 01:55:02 LOG1 config_iflo: Receiver ALFA already selected 2008-Jul-25 01:55:02 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jul-25 01:55:02 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Jul-25 01:55:02 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jul-25 01:55:02 LOG5 begin_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2008-Jul-25 01:55:03 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jul-25 01:55:03 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jul-25 01:55:03 LOG5 end_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2008-Jul-25 01:55:03 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jul-25 01:55:03 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Jul-25 01:55:03 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2008-Jul-25 01:55:03 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2008-Jul-25 01:55:03 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Jul-25 01:55:03 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Jul-25 01:55:03 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2008-Jul-25 01:55:03 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2008-Jul-25 01:55:03 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2008-Jul-25 01:55:03 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1558654704.0} 2008-Jul-25 01:55:03 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2008-Jul-25 01:55:03 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2008-Jul-25 01:55:03 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Jul-25 01:55:03 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Jul-25 01:55:03 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Jul-25 01:55:03 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Jul-25 01:55:03 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Jul-25 01:55:03 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2008-Jul-25 01:55:03 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2008-Jul-25 01:55:03 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2008-Jul-25 01:55:03 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2008-Jul-25 01:55:03 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Jul-25 01:55:03 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2008-Jul-25 01:55:03 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2008-Jul-25 01:55:03 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Jul-25 01:55:03 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 01:55:03 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2008-Jul-25 01:55:03 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2008-Jul-25 01:55:03 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Jul-25 01:55:03 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2008-Jul-25 01:55:03 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2008-Jul-25 01:55:03 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Jul-25 01:55:03 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jul-25 01:55:03 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Jul-25 01:55:03 LOG5 begin_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2008-Jul-25 01:55:03 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1558654704.0} 2008-Jul-25 01:55:03 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Jul-25 01:55:03 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 01:55:03 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jul-25 01:55:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 01:55:04 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 01:55:04 LOG4 got_cormsg: From DATATAKING: vw% DONE 2008-Jul-25 01:55:04 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Jul-25 01:55:04 LOG5 end_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2008-Jul-25 01:55:04 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Jul-25 01:55:04 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Jul-25 01:55:04 LOG5 finish_task: Level: (2) ID = <10052> Status = 0 0 0 0 ok 2008-Jul-25 01:55:04 DONE finish_task: DONE finished configuration: IF/LO path 2008-Jul-25 01:55:04 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Jul-25 01:55:04 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Jul-25 01:55:04 LOG5 end_task: Level: (2) ID = <10052> Status = 0 0 0 0 ok 2008-Jul-25 01:55:04 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Jul-25 01:55:04 LOG5 begin_task: Level: (2) ID = <10055> Status = 0 0 0 0 ok 2008-Jul-25 01:55:04 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Jul-25 01:55:04 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Jul-25 01:55:04 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2008-Jul-25 01:55:04 START begin_task: Starting task 'selecting calibration port' 2008-Jul-25 01:55:04 LOG5 begin_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2008-Jul-25 01:55:04 LOG3 vw_send: To DATATAKING: calport 3 2008-Jul-25 01:55:04 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Jul-25 01:55:04 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jul-25 01:55:04 START begin_task: Starting task 'waiting on calport' 2008-Jul-25 01:55:04 LOG5 begin_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2008-Jul-25 01:55:04 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 01:55:04 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Jul-25 01:55:04 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jul-25 01:55:04 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 01:55:04 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jul-25 01:55:04 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Jul-25 01:55:04 LOG5 end_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2008-Jul-25 01:55:04 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Jul-25 01:55:04 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Jul-25 01:55:04 LOG5 end_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2008-Jul-25 01:55:04 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Jul-25 01:55:04 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Jul-25 01:55:04 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jul-25 01:55:04 LOG5 begin_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2008-Jul-25 01:55:04 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 01:55:04 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jul-25 01:55:04 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jul-25 01:55:04 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jul-25 01:55:04 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jul-25 01:55:04 LOG5 end_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2008-Jul-25 01:55:04 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Jul-25 01:55:04 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Jul-25 01:55:04 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Jul-25 01:55:04 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Jul-25 01:55:05 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Jul-25 01:55:05 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Jul-25 01:55:05 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Jul-25 01:55:05 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Jul-25 01:55:05 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 JID 2008-Jul-25 01:55:05 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 JID 2008-Jul-25 01:55:05 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 JID 2008-Jul-25 01:55:05 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 JID 2008-Jul-25 01:55:05 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Jul-25 01:55:05 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Jul-25 01:55:05 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jul-25 01:55:05 LOG5 begin_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2008-Jul-25 01:55:05 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Jul-25 01:55:05 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jul-25 01:55:05 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Jul-25 01:55:05 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jul-25 01:55:05 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 JID' 2008-Jul-25 01:55:05 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jul-25 01:55:05 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jul-25 01:55:05 LOG5 end_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2008-Jul-25 01:55:05 LOG3 sock_errsend: To WAPPDATA: FLUSH 2008-Jul-25 01:55:05 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Jul-25 01:55:05 LOG5 finish_task: Level: (2) ID = <10055> Status = 0 0 0 0 ok 2008-Jul-25 01:55:05 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Jul-25 01:55:05 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Jul-25 01:55:05 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Jul-25 01:55:05 LOG5 end_task: Level: (2) ID = <10055> Status = 0 0 0 0 ok 2008-Jul-25 01:55:05 COMMAND run_command_line: EXECUTING command 6: 'CATALOG togs_ages.cat' 2008-Jul-25 01:55:05 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/togs_ages.cat' 2008-Jul-25 01:55:05 COMMAND run_command_line: EXECUTING command 7: 'GOTO galfasrc' 2008-Jul-25 01:55:05 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2048/togs_ages.cat galfasrc nooffset nowait' 2008-Jul-25 01:55:05 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2008-Jul-25 01:55:05 LOG5 begin_task: Level: (2) ID = <10060> Status = 0 0 0 0 ok 2008-Jul-25 01:55:05 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2008-Jul-25 01:55:05 LOG3 track_source: Calling 'track_source galfasrc 224000.0 +155900 J 0.0 0.0 main small /share/obs4/usr/a2048/togs_ages.cat 0 Topocentric velocity(optical)' 2008-Jul-25 01:55:05 START begin_task: Starting task 'sending tracking commands' 2008-Jul-25 01:55:05 LOG5 begin_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2008-Jul-25 01:55:05 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2008-Jul-25 01:55:05 INFO1 track_source: Starting to track galfasrc 2008-Jul-25 01:55:05 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2008-Jul-25 01:55:05 LOG3 vw_send: To DATATAKING: set ra 224000.0 2008-Jul-25 01:55:05 LOG3 vw_send: To DATATAKING: set dec +155900 2008-Jul-25 01:55:05 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Jul-25 01:55:05 LOG3 vw_send: To DATATAKING: pnt tr 224000.0 +155900 -CJ 2008-Jul-25 01:55:05 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Jul-25 01:55:05 STOP finish_task: Finishing task 'sending tracking commands' 2008-Jul-25 01:55:05 LOG5 finish_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2008-Jul-25 01:55:05 INFO2 finish_task: DONE finished sending: tracking commands 2008-Jul-25 01:55:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-25 01:55:05 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Jul-25 01:55:05 LOG5 end_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2008-Jul-25 01:55:05 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2008-Jul-25 01:55:05 LOG5 finish_task: Level: (2) ID = <10060> Status = 0 0 0 0 ok 2008-Jul-25 01:55:05 DONE finish_task: DONE finished tracking: source 'galfasrc' 2008-Jul-25 01:55:05 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Jul-25 01:55:05 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2008-Jul-25 01:55:05 LOG5 end_task: Level: (2) ID = <10060> Status = 0 0 0 0 ok 2008-Jul-25 01:55:06 COMMAND run_command_line: EXECUTING command 8: 'ALFAANGLE 19' 2008-Jul-25 01:55:06 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2008-Jul-25 01:55:06 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Jul-25 01:55:06 LOG5 begin_task: Level: (2) ID = <10062> Status = 0 0 0 0 ok 2008-Jul-25 01:55:06 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Jul-25 01:55:06 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Jul-25 01:55:06 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-Jul-25 01:55:06 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Jul-25 01:55:06 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Jul-25 01:55:06 LOG5 begin_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2008-Jul-25 01:55:06 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Jul-25 01:55:06 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2008-Jul-25 01:55:06 LOG4 got_cormsg: From DATATAKING: set ra 224000.0 2008-Jul-25 01:55:06 LOG4 got_cormsg: From DATATAKING: set dec +155900 2008-Jul-25 01:55:06 LOG4 got_cormsg: From DATATAKING: vw% 224000.0 2008-Jul-25 01:55:06 LOG4 got_cormsg: From DATATAKING: vw% +155900 2008-Jul-25 01:55:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 01:55:06 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Jul-25 01:55:06 LOG4 got_cormsg: From DATATAKING: pnt tr 224000.0 +155900 -CJ 2008-Jul-25 01:55:06 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Jul-25 01:55:06 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Jul-25 01:55:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 01:57:36 ERROR end_wait_seconds: ERROR timed out while waiting for ALFA rotation! 2008-Jul-25 01:57:36 LOG1 task_failed: Task 'waiting on ALFA rotation' failed! 2008-Jul-25 01:57:36 LOG5 task_failed: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2008-Jul-25 01:57:36 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'FAILED' 2008-Jul-25 01:57:36 LOG5 end_task: Level: (3) ID = <10063> Status = 0 0 0 1 failed 2008-Jul-25 01:57:36 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Jul-25 01:57:36 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Jul-25 01:57:36 LOG5 finish_task: Level: (2) ID = <10062> Status = 0 0 0 1 failed 2008-Jul-25 01:57:36 ERROR finish_task: ERROR failed configuration: rotating ALFA to +19 degrees 2008-Jul-25 01:57:36 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2008-Jul-25 01:57:36 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'FAILED' 2008-Jul-25 01:57:36 LOG5 end_task: Level: (2) ID = <10062> Status = 0 0 0 1 failed 2008-Jul-25 01:57:36 ALERT run_command_file: Stopping command file processing at line 8! 2008-Jul-25 01:57:36 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2008-Jul-25 01:57:36 STOP finish_task: Finishing task 'running command file 'command_galfasrc.cmd'' 2008-Jul-25 01:57:36 LOG5 finish_task: Level: (1) ID = <10051> Status = 0 0 0 1 failed 2008-Jul-25 01:57:36 ERROR finish_task: ERROR failed running: command file 'command_galfasrc.cmd' 2008-Jul-25 01:57:36 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2008-Jul-25 01:57:36 END end_task: Finishing task 'running command file 'command_galfasrc.cmd'' with status 'FAILED' 2008-Jul-25 01:57:36 LOG5 end_task: Level: (1) ID = <10051> Status = 0 0 0 1 failed 2008-Jul-25 01:58:27 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 01:58:27.301 (seconds: 7107.301)!} 2008-Jul-25 01:58:27 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 01:58:27.301 (seconds: 7107.301)! 2008-Jul-25 02:00:03 INFO1 CIMA-run_command_file: Transferring command file '080725_obs.cmd ' to executive ... 2008-Jul-25 02:00:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 3 {LOAD ages_config.conf} 2008-Jul-25 02:00:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 4 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5} 2008-Jul-25 02:00:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 5 {CATALOG AGESFull.cat} 2008-Jul-25 02:00:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {IF LSTSLEW(AGES7448_p3_088) < 215126 THEN} 2008-Jul-25 02:00:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {FIXEDDRIFT az=277.82 alfaangle=-85.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p3_088 ra=225000.00 dec=154830.00} 2008-Jul-25 02:00:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 12 {ENDIF} 2008-Jul-25 02:00:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 15 {IF LSTSLEW(AGES7448_p3_090) < 221426 THEN} 2008-Jul-25 02:00:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 16 {FIXEDDRIFT az=285.14 alfaangle=88.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p3_090 ra=225000.00 dec=154530.00} 2008-Jul-25 02:00:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 19 {ENDIF} 2008-Jul-25 02:00:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 22 {IF LSTSLEW(AGES7448_p3_092) < 223726 THEN} 2008-Jul-25 02:00:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 23 {FIXEDDRIFT az=309.41 alfaangle=64.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p3_092 ra=225000.00 dec=154230.00} 2008-Jul-25 02:00:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 26 {ENDIF} 2008-Jul-25 02:00:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 29 {IF LSTSLEW(AGES7448_p3_094) < 230326 THEN} 2008-Jul-25 02:00:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 14 30 {FIXEDDRIFT az=50.04 alfaangle=-25.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p3_094 ra=225000.00 dec=153930.00} 2008-Jul-25 02:00:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 15 33 {ENDIF} 2008-Jul-25 02:00:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 16 36 {IF LSTSLEW(AGES7448_p3_096) < 232626 THEN} 2008-Jul-25 02:00:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 17 37 {FIXEDDRIFT az=73.94 alfaangle=-49.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p3_096 ra=225000.00 dec=153630.00} 2008-Jul-25 02:00:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 18 40 {ENDIF} 2008-Jul-25 02:00:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 19 43 {IF LSTSLEW(AGES7448_p3_098) < 234926 THEN} 2008-Jul-25 02:00:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 20 44 {FIXEDDRIFT az=81.20 alfaangle=-55.7 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p3_098 ra=225000.00 dec=153330.00} 2008-Jul-25 02:00:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 21 47 {ENDIF} 2008-Jul-25 02:00:04 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-Jul-25 02:00:04 LOG4 exec_msg: From OBSERVER: run_command_file 080725_obs.cmd 1 1 21 2008-Jul-25 02:00:04 LOG4 run_command_file: Calling 'run_command_file 080725_obs.cmd 1 1 21' 2008-Jul-25 02:00:04 BEGIN begin_task: Starting task 'running command file '080725_obs.cmd'' 2008-Jul-25 02:00:04 LOG5 begin_task: Level: (1) ID = <10064> Status = 0 0 0 0 ok 2008-Jul-25 02:00:04 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '080725_obs.cmd' ...} 2008-Jul-25 02:00:04 NOTE run_command_file: Starting execution of command file '080725_obs.cmd' from line 1 2008-Jul-25 02:00:04 COMMAND run_command_line: EXECUTING command 3: 'LOAD ages_config.conf' 2008-Jul-25 02:00:04 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2008-Jul-25 02:00:04 NOTE CIMA-check_config_file: File 'ages_config.conf' contains an ALFA set-up which will be ignored! 2008-Jul-25 02:00:04 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Jul-25 02:00:04 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2008-Jul-25 02:00:04 NOTE CIMA-load_config_file: Loading configuration file 'ages_config.conf' 2008-Jul-25 02:00:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Jul-25 02:00:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Jul-25 02:00:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Jul-25 02:00:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Jul-25 02:00:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Jul-25 02:00:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2008-Jul-25 02:00:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Jul-25 02:00:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786" 2008-Jul-25 02:00:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786" 2008-Jul-25 02:00:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786" 2008-Jul-25 02:00:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786" 2008-Jul-25 02:00:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786" 2008-Jul-25 02:00:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786" 2008-Jul-25 02:00:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786" 2008-Jul-25 02:00:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786" 2008-Jul-25 02:00:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786" 2008-Jul-25 02:00:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Jul-25 02:00:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Jul-25 02:00:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Jul-25 02:00:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Jul-25 02:00:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Jul-25 02:00:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Jul-25 02:00:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Jul-25 02:00:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Jul-25 02:00:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Jul-25 02:00:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Jul-25 02:00:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Jul-25 02:00:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Jul-25 02:00:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Jul-25 02:00:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2008-Jul-25 02:00:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Jul-25 02:00:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Jul-25 02:00:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Jul-25 02:00:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Jul-25 02:00:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Jul-25 02:00:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Jul-25 02:00:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Jul-25 02:00:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Jul-25 02:00:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Jul-25 02:00:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1670.405752" 2008-Jul-25 02:00:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Jul-25 02:00:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Jul-25 02:00:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Jul-25 02:00:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Jul-25 02:00:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Jul-25 02:00:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Jul-25 02:00:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Jul-25 02:00:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Jul-25 02:00:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Jul-25 02:00:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Jul-25 02:00:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Jul-25 02:00:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Jul-25 02:00:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Jul-25 02:00:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Jul-25 02:00:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Jul-25 02:00:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Jul-25 02:00:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Jul-25 02:00:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Jul-25 02:00:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Jul-25 02:00:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Jul-25 02:00:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Jul-25 02:00:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Jul-25 02:00:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Jul-25 02:00:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Jul-25 02:00:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Jul-25 02:00:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Jul-25 02:00:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Jul-25 02:00:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Jul-25 02:00:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Jul-25 02:00:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Jul-25 02:00:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Jul-25 02:00:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Jul-25 02:00:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Jul-25 02:00:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Jul-25 02:00:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Jul-25 02:00:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Jul-25 02:00:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Jul-25 02:00:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Jul-25 02:00:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Jul-25 02:00:06 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Jul-25 02:00:06 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Jul-25 02:00:06 LOG5 begin_task: Level: (2) ID = <10065> Status = 0 0 0 0 ok 2008-Jul-25 02:00:06 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Jul-25 02:00:06 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Jul-25 02:00:06 LOG1 config_iflo: Receiver ALFA already selected 2008-Jul-25 02:00:06 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jul-25 02:00:06 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Jul-25 02:00:06 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jul-25 02:00:06 LOG5 begin_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2008-Jul-25 02:00:06 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jul-25 02:00:06 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jul-25 02:00:06 LOG5 end_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2008-Jul-25 02:00:06 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jul-25 02:00:06 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Jul-25 02:00:06 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2008-Jul-25 02:00:06 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2008-Jul-25 02:00:06 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Jul-25 02:00:06 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Jul-25 02:00:06 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2008-Jul-25 02:00:06 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2008-Jul-25 02:00:06 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2008-Jul-25 02:00:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1670405752.0} 2008-Jul-25 02:00:06 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2008-Jul-25 02:00:06 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2008-Jul-25 02:00:06 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Jul-25 02:00:06 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Jul-25 02:00:06 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Jul-25 02:00:06 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Jul-25 02:00:06 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Jul-25 02:00:06 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2008-Jul-25 02:00:06 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2008-Jul-25 02:00:06 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2008-Jul-25 02:00:06 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2008-Jul-25 02:00:06 LOG3 send_ifx: Skipping if2-command 'if2_gain 8 8' since system already is properly set 2008-Jul-25 02:00:06 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2008-Jul-25 02:00:06 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2008-Jul-25 02:00:06 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Jul-25 02:00:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 02:00:06 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2008-Jul-25 02:00:06 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2008-Jul-25 02:00:06 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Jul-25 02:00:06 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2008-Jul-25 02:00:06 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2008-Jul-25 02:00:06 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Jul-25 02:00:07 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jul-25 02:00:07 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Jul-25 02:00:07 LOG5 begin_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2008-Jul-25 02:00:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1670405752.0} 2008-Jul-25 02:00:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 02:00:07 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jul-25 02:00:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 02:00:07 LOG4 got_cormsg: From DATATAKING: vw% DONE 2008-Jul-25 02:00:07 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Jul-25 02:00:07 LOG5 end_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2008-Jul-25 02:00:07 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Jul-25 02:00:07 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Jul-25 02:00:07 LOG5 finish_task: Level: (2) ID = <10065> Status = 0 0 0 0 ok 2008-Jul-25 02:00:07 DONE finish_task: DONE finished configuration: IF/LO path 2008-Jul-25 02:00:07 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Jul-25 02:00:07 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Jul-25 02:00:07 LOG5 end_task: Level: (2) ID = <10065> Status = 0 0 0 0 ok 2008-Jul-25 02:00:07 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Jul-25 02:00:07 LOG5 begin_task: Level: (2) ID = <10068> Status = 0 0 0 0 ok 2008-Jul-25 02:00:07 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Jul-25 02:00:07 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Jul-25 02:00:07 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2008-Jul-25 02:00:07 START begin_task: Starting task 'selecting calibration port' 2008-Jul-25 02:00:07 LOG5 begin_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2008-Jul-25 02:00:07 LOG3 vw_send: To DATATAKING: calport 3 2008-Jul-25 02:00:07 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Jul-25 02:00:07 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jul-25 02:00:07 START begin_task: Starting task 'waiting on calport' 2008-Jul-25 02:00:07 LOG5 begin_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2008-Jul-25 02:00:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 02:00:07 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Jul-25 02:00:07 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jul-25 02:00:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 02:00:07 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jul-25 02:00:07 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Jul-25 02:00:07 LOG5 end_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2008-Jul-25 02:00:07 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Jul-25 02:00:07 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Jul-25 02:00:07 LOG5 end_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2008-Jul-25 02:00:07 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Jul-25 02:00:07 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Jul-25 02:00:07 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jul-25 02:00:07 LOG5 begin_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2008-Jul-25 02:00:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 02:00:07 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jul-25 02:00:07 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jul-25 02:00:07 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jul-25 02:00:07 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jul-25 02:00:07 LOG5 end_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2008-Jul-25 02:00:07 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Jul-25 02:00:07 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Jul-25 02:00:07 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Jul-25 02:00:08 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Jul-25 02:00:08 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Jul-25 02:00:08 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Jul-25 02:00:08 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Jul-25 02:00:08 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Jul-25 02:00:08 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 JID 2008-Jul-25 02:00:08 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 JID 2008-Jul-25 02:00:08 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 JID 2008-Jul-25 02:00:08 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 JID 2008-Jul-25 02:00:08 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Jul-25 02:00:08 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Jul-25 02:00:08 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jul-25 02:00:08 LOG5 begin_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2008-Jul-25 02:00:08 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Jul-25 02:00:08 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jul-25 02:00:08 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Jul-25 02:00:08 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jul-25 02:00:08 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 JID' 2008-Jul-25 02:00:08 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jul-25 02:00:08 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jul-25 02:00:08 LOG5 end_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2008-Jul-25 02:00:08 LOG3 sock_errsend: To WAPPDATA: FLUSH 2008-Jul-25 02:00:08 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Jul-25 02:00:08 LOG5 finish_task: Level: (2) ID = <10068> Status = 0 0 0 0 ok 2008-Jul-25 02:00:08 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Jul-25 02:00:08 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Jul-25 02:00:08 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Jul-25 02:00:08 LOG5 end_task: Level: (2) ID = <10068> Status = 0 0 0 0 ok 2008-Jul-25 02:00:08 COMMAND run_command_line: EXECUTING command 4: 'SETUP FIXEDDRIFT calwhen=tracking calsecs=5' 2008-Jul-25 02:00:08 COMMAND run_command_line: EXECUTING command 5: 'CATALOG AGESFull.cat' 2008-Jul-25 02:00:08 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2008-Jul-25 02:00:08 COMMAND run_command_line: EXECUTING command 8: 'IF LSTSLEW(AGES7448_p3_088) < 215126 THEN' 2008-Jul-25 02:00:09 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES7448_p3_088) < 215126 2008-Jul-25 02:00:09 INFO5 is_if_valid: Condition parsed as: 21.789574666666667 < 21.857222222222223 2008-Jul-25 02:00:09 COMMAND run_command_line: EXECUTING command 9: 'FIXEDDRIFT az=277.82 alfaangle=-85.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p3_088 ra=225000.00 dec=154830.00' 2008-Jul-25 02:00:09 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Jul-25 02:00:09 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Jul-25 02:00:09 WARNING check_obsmode: WARNING failed to get a response from the CIMA frontend when checking options for 'fixed azimuth drift map'! 2008-Jul-25 02:00:09 NOTE check_obsmode: Assuming that the options are OK 2008-Jul-25 02:00:09 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 277.82 -85.0 hcorcal 5 tracking no first 1 AGES7448_p3_088 225000.00 154830.00 J 8500.0 Heliocentric velocity(optical)' 2008-Jul-25 02:00:09 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Jul-25 02:00:09 LOG5 begin_task: Level: (2) ID = <10073> Status = 0 0 0 0 ok 2008-Jul-25 02:00:09 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'galfasrc' 2008-Jul-25 02:00:09 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Jul-25 02:00:09 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES7448_p3_088} 2008-Jul-25 02:00:09 INFO3 fixed_driftmap: Sending telescope to Az = 277.82 and ZA = 14.31 2008-Jul-25 02:00:09 LOG3 track_source: Calling 'track_source AGES7448_p3_088 277.82 14.3085530444 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Jul-25 02:00:09 START begin_task: Starting task 'sending tracking commands' 2008-Jul-25 02:00:09 LOG5 begin_task: Level: (3) ID = <10074> Status = 0 0 0 0 ok 2008-Jul-25 02:00:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7448_p3_088} INFO {Slewing to source 'AGES7448_p3_088' ...} 2008-Jul-25 02:00:10 INFO1 track_source: Starting to track AGES7448_p3_088 2008-Jul-25 02:00:10 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7448_p3_088" 2008-Jul-25 02:00:10 LOG3 vw_send: To DATATAKING: set ra 277.82 2008-Jul-25 02:00:10 LOG3 vw_send: To DATATAKING: set dec 14.3085530444 2008-Jul-25 02:00:10 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Jul-25 02:00:10 LOG3 vw_send: To DATATAKING: pnt tr 277.82 14.3085530444 -CF 2008-Jul-25 02:00:10 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Jul-25 02:00:10 STOP finish_task: Finishing task 'sending tracking commands' 2008-Jul-25 02:00:10 LOG5 finish_task: Level: (3) ID = <10074> Status = 0 0 0 0 ok 2008-Jul-25 02:00:10 INFO2 finish_task: DONE finished sending: tracking commands 2008-Jul-25 02:00:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-25 02:00:10 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Jul-25 02:00:10 LOG5 end_task: Level: (3) ID = <10074> Status = 0 0 0 0 ok 2008-Jul-25 02:00:10 START begin_task: Starting task 'rotate ALFA to -85 degrees' 2008-Jul-25 02:00:10 LOG5 begin_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2008-Jul-25 02:00:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -85 degrees ...} 2008-Jul-25 02:00:10 INFO2 rotate_alfa: ALFA commanded to -85.0 degrees 2008-Jul-25 02:00:10 LOG3 sock_errsend: To ALFAMOTOR: POSITION -85.0 REPLY 2008-Jul-25 02:00:10 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Jul-25 02:00:10 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Jul-25 02:00:10 LOG5 begin_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2008-Jul-25 02:00:10 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Jul-25 02:00:10 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7448_p3_088" 2008-Jul-25 02:00:10 LOG4 got_cormsg: From DATATAKING: set ra 277.82 2008-Jul-25 02:00:10 LOG4 got_cormsg: From DATATAKING: set dec 14.3085530444 2008-Jul-25 02:00:10 LOG4 got_cormsg: From DATATAKING: vw% 277.82 2008-Jul-25 02:00:10 LOG4 got_cormsg: From DATATAKING: vw% 14.3085530444 2008-Jul-25 02:00:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 02:00:10 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Jul-25 02:00:10 LOG4 got_cormsg: From DATATAKING: pnt tr 277.82 14.3085530444 -CF 2008-Jul-25 02:00:10 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Jul-25 02:00:10 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Jul-25 02:00:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 02:02:40 ERROR end_wait_seconds: ERROR timed out while waiting for ALFA rotation! 2008-Jul-25 02:02:40 LOG1 task_failed: Task 'waiting on ALFA rotation' failed! 2008-Jul-25 02:02:40 LOG5 task_failed: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2008-Jul-25 02:02:40 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'FAILED' 2008-Jul-25 02:02:40 LOG5 end_task: Level: (4) ID = <10076> Status = 0 0 0 1 failed 2008-Jul-25 02:02:40 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Jul-25 02:02:40 STOP finish_task: Finishing task 'rotate ALFA to -85 degrees' 2008-Jul-25 02:02:40 LOG5 finish_task: Level: (3) ID = <10075> Status = 0 0 0 1 failed 2008-Jul-25 02:02:40 ERROR finish_task: ERROR failed configuration: rotating ALFA to -85 degrees 2008-Jul-25 02:02:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Failed 2008-Jul-25 02:02:40 STOP end_task: Finishing task 'rotate ALFA to -85 degrees' with status 'FAILED' 2008-Jul-25 02:02:40 LOG5 end_task: Level: (3) ID = <10075> Status = 0 0 0 1 failed 2008-Jul-25 02:02:40 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Jul-25 02:02:40 LOG5 finish_task: Level: (2) ID = <10073> Status = 0 0 0 1 failed 2008-Jul-25 02:02:40 ERROR finish_task: ERROR failed pattern: fixed azimuth drift map 2008-Jul-25 02:02:40 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2008-Jul-25 02:02:40 END end_task: Finishing task 'fixed azimuth drift map' with status 'FAILED' 2008-Jul-25 02:02:40 LOG5 end_task: Level: (2) ID = <10073> Status = 0 0 0 1 failed 2008-Jul-25 02:02:40 ALERT run_command_file: Stopping command file processing at line 9! 2008-Jul-25 02:02:40 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2008-Jul-25 02:02:40 STOP finish_task: Finishing task 'running command file '080725_obs.cmd'' 2008-Jul-25 02:02:40 LOG5 finish_task: Level: (1) ID = <10064> Status = 0 0 0 1 failed 2008-Jul-25 02:02:40 ERROR finish_task: ERROR failed running: command file '080725_obs.cmd' 2008-Jul-25 02:02:40 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2008-Jul-25 02:02:40 END end_task: Finishing task 'running command file '080725_obs.cmd'' with status 'FAILED' 2008-Jul-25 02:02:40 LOG5 end_task: Level: (1) ID = <10064> Status = 0 0 0 1 failed 2008-Jul-25 02:08:43 INFO1 CIMA-run_command_file: Transferring command file '080725_obs.cmd ' to executive ... 2008-Jul-25 02:08:43 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 3 {LOAD ages_config.conf} 2008-Jul-25 02:08:43 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 4 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5} 2008-Jul-25 02:08:43 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 5 {CATALOG AGESFull.cat} 2008-Jul-25 02:08:43 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {IF LSTSLEW(AGES7448_p3_088) < 215126 THEN} 2008-Jul-25 02:08:43 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {FIXEDDRIFT az=277.82 alfaangle=-85.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p3_088 ra=225000.00 dec=154830.00} 2008-Jul-25 02:08:43 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 12 {ENDIF} 2008-Jul-25 02:08:43 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 15 {IF LSTSLEW(AGES7448_p3_090) < 221426 THEN} 2008-Jul-25 02:08:43 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 16 {FIXEDDRIFT az=285.14 alfaangle=88.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p3_090 ra=225000.00 dec=154530.00} 2008-Jul-25 02:08:43 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 19 {ENDIF} 2008-Jul-25 02:08:43 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 22 {IF LSTSLEW(AGES7448_p3_092) < 223726 THEN} 2008-Jul-25 02:08:43 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 23 {FIXEDDRIFT az=309.41 alfaangle=64.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p3_092 ra=225000.00 dec=154230.00} 2008-Jul-25 02:08:43 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 26 {ENDIF} 2008-Jul-25 02:08:43 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 29 {IF LSTSLEW(AGES7448_p3_094) < 230326 THEN} 2008-Jul-25 02:08:43 LOG4 exec_msg: From OBSERVER: store_command_file_line 14 30 {FIXEDDRIFT az=50.04 alfaangle=-25.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p3_094 ra=225000.00 dec=153930.00} 2008-Jul-25 02:08:43 LOG4 exec_msg: From OBSERVER: store_command_file_line 15 33 {ENDIF} 2008-Jul-25 02:08:43 LOG4 exec_msg: From OBSERVER: store_command_file_line 16 36 {IF LSTSLEW(AGES7448_p3_096) < 232626 THEN} 2008-Jul-25 02:08:43 LOG4 exec_msg: From OBSERVER: store_command_file_line 17 37 {FIXEDDRIFT az=73.94 alfaangle=-49.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p3_096 ra=225000.00 dec=153630.00} 2008-Jul-25 02:08:43 LOG4 exec_msg: From OBSERVER: store_command_file_line 18 40 {ENDIF} 2008-Jul-25 02:08:44 LOG4 exec_msg: From OBSERVER: store_command_file_line 19 43 {IF LSTSLEW(AGES7448_p3_098) < 234926 THEN} 2008-Jul-25 02:08:44 LOG4 exec_msg: From OBSERVER: store_command_file_line 20 44 {FIXEDDRIFT az=81.20 alfaangle=-55.7 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p3_098 ra=225000.00 dec=153330.00} 2008-Jul-25 02:08:44 LOG4 exec_msg: From OBSERVER: store_command_file_line 21 47 {ENDIF} 2008-Jul-25 02:08:44 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-Jul-25 02:08:44 LOG4 exec_msg: From OBSERVER: run_command_file 080725_obs.cmd 1 1 21 2008-Jul-25 02:08:44 LOG4 run_command_file: Calling 'run_command_file 080725_obs.cmd 1 1 21' 2008-Jul-25 02:08:44 BEGIN begin_task: Starting task 'running command file '080725_obs.cmd'' 2008-Jul-25 02:08:44 LOG5 begin_task: Level: (1) ID = <10077> Status = 0 0 0 0 ok 2008-Jul-25 02:08:44 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '080725_obs.cmd' ...} 2008-Jul-25 02:08:44 NOTE run_command_file: Starting execution of command file '080725_obs.cmd' from line 1 2008-Jul-25 02:08:44 COMMAND run_command_line: EXECUTING command 3: 'LOAD ages_config.conf' 2008-Jul-25 02:08:44 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2008-Jul-25 02:08:44 NOTE CIMA-check_config_file: File 'ages_config.conf' contains an ALFA set-up which will be ignored! 2008-Jul-25 02:08:44 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Jul-25 02:08:44 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2008-Jul-25 02:08:44 NOTE CIMA-load_config_file: Loading configuration file 'ages_config.conf' 2008-Jul-25 02:08:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Jul-25 02:08:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Jul-25 02:08:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Jul-25 02:08:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Jul-25 02:08:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Jul-25 02:08:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2008-Jul-25 02:08:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Jul-25 02:08:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786" 2008-Jul-25 02:08:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786" 2008-Jul-25 02:08:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786" 2008-Jul-25 02:08:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786" 2008-Jul-25 02:08:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786" 2008-Jul-25 02:08:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786" 2008-Jul-25 02:08:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786" 2008-Jul-25 02:08:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786" 2008-Jul-25 02:08:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786" 2008-Jul-25 02:08:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Jul-25 02:08:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Jul-25 02:08:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Jul-25 02:08:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Jul-25 02:08:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Jul-25 02:08:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Jul-25 02:08:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Jul-25 02:08:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Jul-25 02:08:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Jul-25 02:08:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Jul-25 02:08:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Jul-25 02:08:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Jul-25 02:08:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Jul-25 02:08:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2008-Jul-25 02:08:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Jul-25 02:08:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Jul-25 02:08:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Jul-25 02:08:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Jul-25 02:08:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Jul-25 02:08:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Jul-25 02:08:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Jul-25 02:08:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Jul-25 02:08:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Jul-25 02:08:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1670.405752" 2008-Jul-25 02:08:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Jul-25 02:08:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Jul-25 02:08:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Jul-25 02:08:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Jul-25 02:08:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Jul-25 02:08:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Jul-25 02:08:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Jul-25 02:08:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Jul-25 02:08:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Jul-25 02:08:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Jul-25 02:08:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Jul-25 02:08:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Jul-25 02:08:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Jul-25 02:08:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Jul-25 02:08:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Jul-25 02:08:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Jul-25 02:08:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Jul-25 02:08:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Jul-25 02:08:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Jul-25 02:08:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Jul-25 02:08:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Jul-25 02:08:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Jul-25 02:08:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Jul-25 02:08:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Jul-25 02:08:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Jul-25 02:08:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Jul-25 02:08:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Jul-25 02:08:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Jul-25 02:08:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Jul-25 02:08:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Jul-25 02:08:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Jul-25 02:08:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Jul-25 02:08:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Jul-25 02:08:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Jul-25 02:08:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Jul-25 02:08:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Jul-25 02:08:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Jul-25 02:08:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Jul-25 02:08:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Jul-25 02:08:46 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Jul-25 02:08:46 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Jul-25 02:08:46 LOG5 begin_task: Level: (2) ID = <10078> Status = 0 0 0 0 ok 2008-Jul-25 02:08:46 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Jul-25 02:08:46 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Jul-25 02:08:46 LOG1 config_iflo: Receiver ALFA already selected 2008-Jul-25 02:08:46 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jul-25 02:08:46 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Jul-25 02:08:46 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jul-25 02:08:46 LOG5 begin_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2008-Jul-25 02:08:46 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jul-25 02:08:46 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jul-25 02:08:46 LOG5 end_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2008-Jul-25 02:08:46 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jul-25 02:08:46 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Jul-25 02:08:46 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2008-Jul-25 02:08:46 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2008-Jul-25 02:08:46 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Jul-25 02:08:46 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Jul-25 02:08:46 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2008-Jul-25 02:08:46 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2008-Jul-25 02:08:46 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2008-Jul-25 02:08:46 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1670405752.0} 2008-Jul-25 02:08:47 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2008-Jul-25 02:08:47 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2008-Jul-25 02:08:47 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Jul-25 02:08:47 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Jul-25 02:08:47 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Jul-25 02:08:47 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Jul-25 02:08:47 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Jul-25 02:08:47 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2008-Jul-25 02:08:47 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2008-Jul-25 02:08:47 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2008-Jul-25 02:08:47 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2008-Jul-25 02:08:47 LOG3 send_ifx: Skipping if2-command 'if2_gain 8 8' since system already is properly set 2008-Jul-25 02:08:47 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2008-Jul-25 02:08:47 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2008-Jul-25 02:08:47 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Jul-25 02:08:47 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 02:08:47 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2008-Jul-25 02:08:47 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2008-Jul-25 02:08:47 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Jul-25 02:08:47 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2008-Jul-25 02:08:47 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2008-Jul-25 02:08:47 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Jul-25 02:08:47 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jul-25 02:08:47 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Jul-25 02:08:47 LOG5 begin_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2008-Jul-25 02:08:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1670405752.0} 2008-Jul-25 02:08:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 02:08:47 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jul-25 02:08:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 02:08:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 02:08:47 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jul-25 02:08:47 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Jul-25 02:08:47 LOG5 end_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2008-Jul-25 02:08:47 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Jul-25 02:08:47 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Jul-25 02:08:47 LOG5 finish_task: Level: (2) ID = <10078> Status = 0 0 0 0 ok 2008-Jul-25 02:08:47 DONE finish_task: DONE finished configuration: IF/LO path 2008-Jul-25 02:08:47 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Jul-25 02:08:47 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Jul-25 02:08:47 LOG5 end_task: Level: (2) ID = <10078> Status = 0 0 0 0 ok 2008-Jul-25 02:08:47 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Jul-25 02:08:47 LOG5 begin_task: Level: (2) ID = <10081> Status = 0 0 0 0 ok 2008-Jul-25 02:08:47 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Jul-25 02:08:47 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Jul-25 02:08:47 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2008-Jul-25 02:08:47 START begin_task: Starting task 'selecting calibration port' 2008-Jul-25 02:08:47 LOG5 begin_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2008-Jul-25 02:08:47 LOG3 vw_send: To DATATAKING: calport 3 2008-Jul-25 02:08:47 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Jul-25 02:08:47 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jul-25 02:08:47 START begin_task: Starting task 'waiting on calport' 2008-Jul-25 02:08:47 LOG5 begin_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2008-Jul-25 02:08:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 02:08:47 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Jul-25 02:08:47 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jul-25 02:08:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 02:08:47 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jul-25 02:08:47 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Jul-25 02:08:47 LOG5 end_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2008-Jul-25 02:08:47 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Jul-25 02:08:47 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Jul-25 02:08:47 LOG5 end_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2008-Jul-25 02:08:47 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Jul-25 02:08:47 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Jul-25 02:08:47 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jul-25 02:08:47 LOG5 begin_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2008-Jul-25 02:08:47 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jul-25 02:08:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 02:08:47 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jul-25 02:08:47 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jul-25 02:08:47 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jul-25 02:08:47 LOG5 end_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2008-Jul-25 02:08:47 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Jul-25 02:08:48 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Jul-25 02:08:48 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Jul-25 02:08:48 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Jul-25 02:08:48 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Jul-25 02:08:48 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Jul-25 02:08:48 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Jul-25 02:08:48 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Jul-25 02:08:48 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 JID 2008-Jul-25 02:08:48 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 JID 2008-Jul-25 02:08:48 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 JID 2008-Jul-25 02:08:48 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 JID 2008-Jul-25 02:08:48 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Jul-25 02:08:48 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Jul-25 02:08:48 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jul-25 02:08:48 LOG5 begin_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2008-Jul-25 02:08:48 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Jul-25 02:08:48 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jul-25 02:08:48 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Jul-25 02:08:48 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jul-25 02:08:48 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 JID' 2008-Jul-25 02:08:48 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jul-25 02:08:48 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jul-25 02:08:48 LOG5 end_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2008-Jul-25 02:08:48 LOG3 sock_errsend: To WAPPDATA: FLUSH 2008-Jul-25 02:08:48 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Jul-25 02:08:48 LOG5 finish_task: Level: (2) ID = <10081> Status = 0 0 0 0 ok 2008-Jul-25 02:08:48 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Jul-25 02:08:48 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Jul-25 02:08:48 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Jul-25 02:08:48 LOG5 end_task: Level: (2) ID = <10081> Status = 0 0 0 0 ok 2008-Jul-25 02:08:48 COMMAND run_command_line: EXECUTING command 4: 'SETUP FIXEDDRIFT calwhen=tracking calsecs=5' 2008-Jul-25 02:08:48 COMMAND run_command_line: EXECUTING command 5: 'CATALOG AGESFull.cat' 2008-Jul-25 02:08:48 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2008-Jul-25 02:08:48 COMMAND run_command_line: EXECUTING command 8: 'IF LSTSLEW(AGES7448_p3_088) < 215126 THEN' 2008-Jul-25 02:08:49 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES7448_p3_088) < 215126 2008-Jul-25 02:08:49 INFO5 is_if_valid: Condition parsed as: 21.924414666666667 < 21.857222222222223 2008-Jul-25 02:08:49 INFO1 is_if_valid: Skipping line 'IF LSTSLEW(AGES7448_p3_088) < 215126 THEN' 2008-Jul-25 02:08:49 COMMAND run_command_line: EXECUTING command 9: 'FIXEDDRIFT az=277.82 alfaangle=-85.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p3_088 ra=225000.00 dec=154830.00' 2008-Jul-25 02:08:49 INFO1 run_command_line: Skipping line 'FIXEDDRIFT az=277.82 alfaangle=-85.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p3_088 ra=225000.00 dec=154830.00' in non-true conditional branch 2008-Jul-25 02:08:49 COMMAND run_command_line: EXECUTING command 12: 'ENDIF' 2008-Jul-25 02:08:49 COMMAND run_command_line: EXECUTING command 15: 'IF LSTSLEW(AGES7448_p3_090) < 221426 THEN' 2008-Jul-25 02:08:50 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES7448_p3_090) < 221426 2008-Jul-25 02:08:50 INFO5 is_if_valid: Condition parsed as: 21.924414666666667 < 22.240555555555556 2008-Jul-25 02:08:50 COMMAND run_command_line: EXECUTING command 16: 'FIXEDDRIFT az=285.14 alfaangle=88.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p3_090 ra=225000.00 dec=154530.00' 2008-Jul-25 02:08:50 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Jul-25 02:08:50 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Jul-25 02:08:50 WARNING check_obsmode: WARNING failed to get a response from the CIMA frontend when checking options for 'fixed azimuth drift map'! 2008-Jul-25 02:08:50 NOTE check_obsmode: Assuming that the options are OK 2008-Jul-25 02:08:50 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 285.14 88.6 hcorcal 5 tracking no first 1 AGES7448_p3_090 225000.00 154530.00 J 8500.0 Heliocentric velocity(optical)' 2008-Jul-25 02:08:50 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Jul-25 02:08:50 LOG5 begin_task: Level: (2) ID = <10086> Status = 0 0 0 0 ok 2008-Jul-25 02:08:50 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES7448_p3_088' 2008-Jul-25 02:08:50 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Jul-25 02:08:50 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES7448_p3_090} 2008-Jul-25 02:08:50 INFO3 fixed_driftmap: Sending telescope to Az = 285.14 and ZA = 8.97 2008-Jul-25 02:08:50 LOG3 track_source: Calling 'track_source AGES7448_p3_090 285.14 8.9742871038 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Jul-25 02:08:50 START begin_task: Starting task 'sending tracking commands' 2008-Jul-25 02:08:50 LOG5 begin_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2008-Jul-25 02:08:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7448_p3_090} INFO {Slewing to source 'AGES7448_p3_090' ...} 2008-Jul-25 02:08:50 INFO1 track_source: Starting to track AGES7448_p3_090 2008-Jul-25 02:08:50 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7448_p3_090" 2008-Jul-25 02:08:50 LOG3 vw_send: To DATATAKING: set ra 285.14 2008-Jul-25 02:08:50 LOG3 vw_send: To DATATAKING: set dec 8.9742871038 2008-Jul-25 02:08:50 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Jul-25 02:08:50 LOG3 vw_send: To DATATAKING: pnt tr 285.14 8.9742871038 -CF 2008-Jul-25 02:08:50 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Jul-25 02:08:50 STOP finish_task: Finishing task 'sending tracking commands' 2008-Jul-25 02:08:50 LOG5 finish_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2008-Jul-25 02:08:50 INFO2 finish_task: DONE finished sending: tracking commands 2008-Jul-25 02:08:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-25 02:08:50 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Jul-25 02:08:50 LOG5 end_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2008-Jul-25 02:08:50 START begin_task: Starting task 'rotate ALFA to +88.6 degrees' 2008-Jul-25 02:08:50 LOG5 begin_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2008-Jul-25 02:08:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +88.6 degrees ...} 2008-Jul-25 02:08:50 INFO2 rotate_alfa: ALFA commanded to +88.6 degrees 2008-Jul-25 02:08:50 LOG3 sock_errsend: To ALFAMOTOR: POSITION 88.6 REPLY 2008-Jul-25 02:08:50 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Jul-25 02:08:50 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Jul-25 02:08:50 LOG5 begin_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2008-Jul-25 02:08:50 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Jul-25 02:08:50 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7448_p3_090" 2008-Jul-25 02:08:50 LOG4 got_cormsg: From DATATAKING: set ra 285.14 2008-Jul-25 02:08:50 LOG4 got_cormsg: From DATATAKING: set dec 8.9742871038 2008-Jul-25 02:08:50 LOG4 got_cormsg: From DATATAKING: vw% 285.14 2008-Jul-25 02:08:50 LOG4 got_cormsg: From DATATAKING: vw% 8.9742871038 2008-Jul-25 02:08:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 02:08:50 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Jul-25 02:08:50 LOG4 got_cormsg: From DATATAKING: pnt tr 285.14 8.9742871038 -CF 2008-Jul-25 02:08:50 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Jul-25 02:08:50 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Jul-25 02:08:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 02:10:11 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Jul-25 02:10:11 INFO3 alfa_motor: ALFA rotator in-position +88.60 degrees 2008-Jul-25 02:10:11 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Jul-25 02:10:11 LOG5 end_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2008-Jul-25 02:10:11 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Jul-25 02:10:11 STOP finish_task: Finishing task 'rotate ALFA to +88.6 degrees' 2008-Jul-25 02:10:11 LOG5 finish_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2008-Jul-25 02:10:11 INFO2 finish_task: DONE finished configuration: rotating ALFA to +88.6 degrees 2008-Jul-25 02:10:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-25 02:10:12 STOP end_task: Finishing task 'rotate ALFA to +88.6 degrees' with status 'OK' 2008-Jul-25 02:10:12 LOG5 end_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2008-Jul-25 02:10:12 START begin_task: Starting task 'waiting on telescope' 2008-Jul-25 02:10:12 LOG5 begin_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2008-Jul-25 02:10:12 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Jul-25 02:10:12 LOG3 waittrk: Start waittrk 5 2008-Jul-25 02:10:12 START begin_task: Starting task 'waiting on telescope movement' 2008-Jul-25 02:10:12 LOG5 begin_task: Level: (4) ID = <10091> Status = 0 0 0 0 ok 2008-Jul-25 02:10:17 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Jul-25 02:10:17 LOG5 end_task: Level: (4) ID = <10091> Status = 0 0 0 0 ok 2008-Jul-25 02:10:17 START begin_task: Starting task 'waiting on telescope on source' 2008-Jul-25 02:10:17 LOG5 begin_task: Level: (4) ID = <10092> Status = 0 0 0 0 ok 2008-Jul-25 02:11:08 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Jul-25 02:11:08 LOG5 end_task: Level: (4) ID = <10092> Status = 0 0 0 0 ok 2008-Jul-25 02:11:08 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Jul-25 02:11:08 INFO2 waittrk: Now tracking AGES7448_p3_090 2008-Jul-25 02:11:08 LOG4 waittrk: Current telescope position: Az = 644.68 ZA = 8.96 2008-Jul-25 02:11:08 STOP finish_task: Finishing task 'waiting on telescope' 2008-Jul-25 02:11:08 LOG5 finish_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2008-Jul-25 02:11:08 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Jul-25 02:11:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-25 02:11:08 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Jul-25 02:11:08 LOG5 end_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2008-Jul-25 02:11:08 START begin_task: Starting task 'selecting calibration type' 2008-Jul-25 02:11:08 LOG5 begin_task: Level: (3) ID = <10093> Status = 0 0 0 0 ok 2008-Jul-25 02:11:08 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Jul-25 02:11:08 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Jul-25 02:11:08 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jul-25 02:11:08 START begin_task: Starting task 'waiting on setcal' 2008-Jul-25 02:11:08 LOG5 begin_task: Level: (4) ID = <10094> Status = 0 0 0 0 ok 2008-Jul-25 02:11:08 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Jul-25 02:11:08 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jul-25 02:11:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 02:11:09 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jul-25 02:11:09 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Jul-25 02:11:09 LOG5 end_task: Level: (4) ID = <10094> Status = 0 0 0 0 ok 2008-Jul-25 02:11:09 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Jul-25 02:11:09 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jul-25 02:11:09 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Jul-25 02:11:09 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jul-25 02:11:09 LOG5 begin_task: Level: (4) ID = <10095> Status = 0 0 0 0 ok 2008-Jul-25 02:11:09 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jul-25 02:11:09 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jul-25 02:11:09 LOG5 end_task: Level: (4) ID = <10095> Status = 0 0 0 0 ok 2008-Jul-25 02:11:09 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jul-25 02:11:09 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Jul-25 02:11:09 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jul-25 02:11:09 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Jul-25 02:11:09 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jul-25 02:11:09 LOG5 begin_task: Level: (4) ID = <10096> Status = 0 0 0 0 ok 2008-Jul-25 02:11:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 02:11:09 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jul-25 02:11:09 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jul-25 02:11:09 LOG5 end_task: Level: (4) ID = <10096> Status = 0 0 0 0 ok 2008-Jul-25 02:11:09 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jul-25 02:11:09 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Jul-25 02:11:09 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Jul-25 02:11:09 LOG5 end_task: Level: (3) ID = <10093> Status = 0 0 0 0 ok 2008-Jul-25 02:11:09 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2008-Jul-25 02:11:09 INFO2 astwait: Waiting for 957 seconds from 06:11:09 to 06:27:06 UTC ... 2008-Jul-25 02:11:09 LOG4 send_obs_status: To obs_status: <1> TASKTIME 957 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Jul-25 02:11:09 START begin_task: Starting task 'waiting on waiting for AST time' 2008-Jul-25 02:11:09 LOG5 begin_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2008-Jul-25 02:27:06 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2008-Jul-25 02:27:06 LOG5 end_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2008-Jul-25 02:27:06 INFO3 astwait: Finished waiting 2008-Jul-25 02:27:06 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Jul-25 02:27:06 LOG5 dopset_later: Calling 'dopset_later 61.102280643128545' 2008-Jul-25 02:27:06 INFO3 dopset_later: Setting Doppler correction for 02:28:06 (61.1 seconds from now) 2008-Jul-25 02:27:06 LOG5 antvel: Calling 'antvel 285.140000 8.974287 F 61.102280643128545' 2008-Jul-25 02:27:06 LOG2 antvel: Transforming current Az = 285.14 ZA = 8.97 to apparent RA = 22:50:26.8 Dec = +15:48:17.1 2008-Jul-25 02:27:06 LOG2 antvel: Parameters to Doppler: Heliocentric 23286 2008 207 0.0 2008-Jul-25 02:27:06 INFO5 antvel: Computed antenna velocity: -20.16272 km/s 2008-Jul-25 02:27:06 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-20.162723926799998 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Jul-25 02:27:06 INFO4 dopset_gen: New sky frequencies: 1381.336331 1381.336331 1381.336331 1381.336331 1381.336331 1381.336331 1381.336331 1381.336331 1381.336331 2008-Jul-25 02:27:06 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.336331 sky0=1381.336331 sky1=1381.336331 sky2=1381.336331 sky3=1381.336331 sky4=1381.336331 sky5=1381.336331 sky6=1381.336331 sky7=1381.336331 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jul-25 02:27:06 LOG2 dopset_gen: Result from 'sky2syn': 1631.336331 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jul-25 02:27:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631336331.0} 2008-Jul-25 02:27:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 02:27:06 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Jul-25 02:27:06 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Jul-25 02:27:06 INFO5 fixed_driftmap: Tracking J2000 position: RA = 22:49:03.4 Dec = +15:45:33.6 2008-Jul-25 02:27:06 LOG3 track_source: Calling 'track_source AGES7448_p3_090 224903.4 154533.6 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Jul-25 02:27:06 START begin_task: Starting task 'sending tracking commands' 2008-Jul-25 02:27:06 LOG5 begin_task: Level: (3) ID = <10098> Status = 0 0 0 0 ok 2008-Jul-25 02:27:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7448_p3_090} INFO {Slewing to source 'AGES7448_p3_090' ...} 2008-Jul-25 02:27:06 INFO1 track_source: Starting to track AGES7448_p3_090 2008-Jul-25 02:27:06 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7448_p3_090" 2008-Jul-25 02:27:06 LOG3 vw_send: To DATATAKING: set ra 224903.4 2008-Jul-25 02:27:06 LOG3 vw_send: To DATATAKING: set dec 154533.6 2008-Jul-25 02:27:06 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Jul-25 02:27:06 LOG3 vw_send: To DATATAKING: pnt tr 224903.4 154533.6 -CJ 2008-Jul-25 02:27:06 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Jul-25 02:27:06 STOP finish_task: Finishing task 'sending tracking commands' 2008-Jul-25 02:27:06 LOG5 finish_task: Level: (3) ID = <10098> Status = 0 0 0 0 ok 2008-Jul-25 02:27:06 INFO2 finish_task: DONE finished sending: tracking commands 2008-Jul-25 02:27:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-25 02:27:06 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Jul-25 02:27:06 LOG5 end_task: Level: (3) ID = <10098> Status = 0 0 0 0 ok 2008-Jul-25 02:27:06 START begin_task: Starting task 'waiting on telescope' 2008-Jul-25 02:27:06 LOG5 begin_task: Level: (3) ID = <10099> Status = 0 0 0 0 ok 2008-Jul-25 02:27:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Jul-25 02:27:06 LOG3 waittrk: Start waittrk 5 2008-Jul-25 02:27:06 START begin_task: Starting task 'waiting on telescope movement' 2008-Jul-25 02:27:06 LOG5 begin_task: Level: (4) ID = <10100> Status = 0 0 0 0 ok 2008-Jul-25 02:27:06 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631336331.0} 2008-Jul-25 02:27:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 02:27:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 02:27:06 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7448_p3_090" 2008-Jul-25 02:27:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 02:27:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 02:27:06 LOG4 got_cormsg: From DATATAKING: set ra 224903.4 2008-Jul-25 02:27:06 LOG4 got_cormsg: From DATATAKING: set dec 154533.6 2008-Jul-25 02:27:06 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Jul-25 02:27:06 LOG4 got_cormsg: From DATATAKING: pnt tr 224903.4 154533.6 -CJ 2008-Jul-25 02:27:06 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Jul-25 02:27:06 LOG4 got_cormsg: From DATATAKING: 224903.4 2008-Jul-25 02:27:06 LOG4 got_cormsg: From DATATAKING: vw% 154533.6 2008-Jul-25 02:27:06 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2008-Jul-25 02:27:11 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Jul-25 02:27:11 LOG5 end_task: Level: (4) ID = <10100> Status = 0 0 0 0 ok 2008-Jul-25 02:27:11 START begin_task: Starting task 'waiting on telescope on source' 2008-Jul-25 02:27:11 LOG5 begin_task: Level: (4) ID = <10101> Status = 0 0 0 0 ok 2008-Jul-25 02:27:13 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Jul-25 02:27:13 LOG5 end_task: Level: (4) ID = <10101> Status = 0 0 0 0 ok 2008-Jul-25 02:27:13 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Jul-25 02:27:13 INFO2 waittrk: Now tracking AGES7448_p3_090 2008-Jul-25 02:27:13 LOG4 waittrk: Current telescope position: Az = 644.71 ZA = 8.95 2008-Jul-25 02:27:13 STOP finish_task: Finishing task 'waiting on telescope' 2008-Jul-25 02:27:13 LOG5 finish_task: Level: (3) ID = <10099> Status = 0 0 0 0 ok 2008-Jul-25 02:27:13 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Jul-25 02:27:13 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-25 02:27:13 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Jul-25 02:27:13 LOG5 end_task: Level: (3) ID = <10099> Status = 0 0 0 0 ok 2008-Jul-25 02:27:13 START begin_task: Starting task 'adjusting WAPP power' 2008-Jul-25 02:27:13 LOG5 begin_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2008-Jul-25 02:27:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Jul-25 02:27:13 INFO2 adjust_power: Starting to adjust WAPP power 2008-Jul-25 02:27:13 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Jul-25 02:27:13 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Jul-25 02:27:13 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jul-25 02:27:13 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Jul-25 02:27:13 LOG5 begin_task: Level: (4) ID = <10103> Status = 0 0 0 0 ok 2008-Jul-25 02:27:13 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Jul-25 02:27:13 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jul-25 02:27:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 02:27:16 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jul-25 02:27:16 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Jul-25 02:27:16 LOG5 end_task: Level: (4) ID = <10103> Status = 0 0 0 0 ok 2008-Jul-25 02:27:17 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Jul-25 02:27:17 START begin_task: Starting task 'adjusting WAPP power' 2008-Jul-25 02:27:17 LOG5 begin_task: Level: (4) ID = <10104> Status = 0 0 0 0 ok 2008-Jul-25 02:27:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Jul-25 02:27:17 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Jul-25 02:27:17 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Jul-25 02:27:17 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Jul-25 02:27:17 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Jul-25 02:27:17 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Jul-25 02:27:17 LOG5 begin_task: Level: (5) ID = <10105> Status = 0 0 0 0 ok 2008-Jul-25 02:27:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 02:27:17 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Jul-25 02:27:17 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 0 0 dB --- beam 1: 5 1 dB 2008-Jul-25 02:27:17 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 0 dB --- beam 5: 0 0 dB 2008-Jul-25 02:27:17 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 0 0 dB --- beam 3: 0 0 dB 2008-Jul-25 02:27:17 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 2 dB --- beam 7: 1 2 dB 2008-Jul-25 02:27:17 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Jul-25 02:27:17 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Jul-25 02:27:17 LOG5 end_task: Level: (5) ID = <10105> Status = 0 0 0 0 ok 2008-Jul-25 02:27:17 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.022 0.018 ALFA beam 1: 1.089 0.958 2008-Jul-25 02:27:17 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.071 0.014 ALFA beam 3: 0.014 0.036 2008-Jul-25 02:27:17 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.106 0.014 ALFA beam 5: 0.026 0.014 2008-Jul-25 02:27:17 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.930 0.913 ALFA beam 7: 1.032 1.014 2008-Jul-25 02:27:17 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Jul-25 02:27:17 LOG5 finish_task: Level: (4) ID = <10104> Status = 0 0 0 0 ok 2008-Jul-25 02:27:17 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Jul-25 02:27:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-25 02:27:17 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Jul-25 02:27:17 LOG5 end_task: Level: (4) ID = <10104> Status = 0 0 0 0 ok 2008-Jul-25 02:27:17 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Jul-25 02:27:17 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Jul-25 02:27:17 LOG5 finish_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2008-Jul-25 02:27:17 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Jul-25 02:27:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-25 02:27:17 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Jul-25 02:27:17 LOG5 end_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2008-Jul-25 02:27:17 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 JID 2008-Jul-25 02:27:17 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 JID 2008-Jul-25 02:27:17 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 JID 2008-Jul-25 02:27:17 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 JID 2008-Jul-25 02:27:17 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Jul-25 02:27:17 START begin_task: Starting task 'WAPP calibration' 2008-Jul-25 02:27:17 LOG5 begin_task: Level: (3) ID = <10106> Status = 0 0 0 0 ok 2008-Jul-25 02:27:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Jul-25 02:27:18 START begin_task: Starting task 'selecting calibration type' 2008-Jul-25 02:27:18 LOG5 begin_task: Level: (4) ID = <10107> Status = 0 0 0 0 ok 2008-Jul-25 02:27:18 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Jul-25 02:27:18 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Jul-25 02:27:18 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jul-25 02:27:18 START begin_task: Starting task 'waiting on setcal' 2008-Jul-25 02:27:18 LOG5 begin_task: Level: (5) ID = <10108> Status = 0 0 0 0 ok 2008-Jul-25 02:27:18 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 JID' 2008-Jul-25 02:27:18 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Jul-25 02:27:18 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jul-25 02:27:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 02:27:18 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jul-25 02:27:18 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Jul-25 02:27:18 LOG5 end_task: Level: (5) ID = <10108> Status = 0 0 0 0 ok 2008-Jul-25 02:27:18 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Jul-25 02:27:18 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jul-25 02:27:18 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Jul-25 02:27:18 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jul-25 02:27:18 LOG5 begin_task: Level: (5) ID = <10109> Status = 0 0 0 0 ok 2008-Jul-25 02:27:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 02:27:18 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jul-25 02:27:18 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jul-25 02:27:18 LOG5 end_task: Level: (5) ID = <10109> Status = 0 0 0 0 ok 2008-Jul-25 02:27:18 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jul-25 02:27:18 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Jul-25 02:27:18 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jul-25 02:27:18 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Jul-25 02:27:18 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jul-25 02:27:18 LOG5 begin_task: Level: (5) ID = <10110> Status = 0 0 0 0 ok 2008-Jul-25 02:27:18 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jul-25 02:27:18 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jul-25 02:27:18 LOG5 end_task: Level: (5) ID = <10110> Status = 0 0 0 0 ok 2008-Jul-25 02:27:18 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jul-25 02:27:18 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Jul-25 02:27:18 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Jul-25 02:27:18 LOG5 end_task: Level: (4) ID = <10107> Status = 0 0 0 0 ok 2008-Jul-25 02:27:18 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Jul-25 02:27:18 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Jul-25 02:27:18 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Jul-25 02:27:18 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jul-25 02:27:18 LOG5 begin_task: Level: (4) ID = <10111> Status = 0 0 0 0 ok 2008-Jul-25 02:27:18 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jul-25 02:27:18 NOTE WAPPDATA-new_file: New FITS file: wapp.20080725.a2048.0001.fits 2008-Jul-25 02:27:18 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Jul-25 02:27:18 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080725.a2048.0001.fits} 2008-Jul-25 02:27:18 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jul-25 02:27:18 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jul-25 02:27:18 LOG5 end_task: Level: (4) ID = <10111> Status = 0 0 0 0 ok 2008-Jul-25 02:27:18 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Jul-25 02:27:18 LOG4 take_data: Calling 'take_data 5 5 CAL ON -' 2008-Jul-25 02:27:18 START begin_task: Starting task 'WAPP spectral observation' 2008-Jul-25 02:27:18 LOG5 begin_task: Level: (4) ID = <10112> Status = 0 0 0 0 ok 2008-Jul-25 02:27:18 LOG5 log_alfabeam: Parameters: 22.817611111111109 15.759333333333334 22.227204 2008.5670151722566 88.599899 2008-Jul-25 02:27:18 LOG4 log_alfabeam: ALFABEAM 0 22.817611111111102 15.759333333333331 2008-Jul-25 02:27:18 LOG4 log_alfabeam: ALFABEAM 1 22.815572351618865 15.850284799943198 2008-Jul-25 02:27:18 LOG4 log_alfabeam: ALFABEAM 2 22.810532792863171 15.789931732156253 2008-Jul-25 02:27:18 LOG4 log_alfabeam: ALFABEAM 3 22.812526538628717 15.699152379646423 2008-Jul-25 02:27:18 LOG4 log_alfabeam: ALFABEAM 4 22.819583062905338 15.667668986301722 2008-Jul-25 02:27:18 LOG4 log_alfabeam: ALFABEAM 5 22.824688383333843 15.728734002064718 2008-Jul-25 02:27:18 LOG4 log_alfabeam: ALFABEAM 6 22.822670924820603 15.820573024704840 2008-Jul-25 02:27:18 INFO2 take_data: Starting WAPP scan: 820700005 2008-Jul-25 02:27:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Jul-25 02:27:19 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jul-25 02:27:19 LOG5 begin_task: Level: (5) ID = <10113> Status = 0 0 0 0 ok 2008-Jul-25 02:27:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jul-25 02:27:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23240.00 2008-Jul-25 02:27:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 02:27:19 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 1.089 0.958 2008-Jul-25 02:27:19 LOG4 check_wapp_levels: WAPP-2 power levels: 0.071 0.014 0.014 0.036 2008-Jul-25 02:27:19 LOG4 check_wapp_levels: WAPP-3 power levels: 0.106 0.014 0.026 0.014 2008-Jul-25 02:27:19 LOG4 check_wapp_levels: WAPP-4 power levels: 0.930 0.913 1.032 1.014 2008-Jul-25 02:27:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.336331 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jul-25 02:27:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.336331 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 02:27:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.336331 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 02:27:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.336331 MHz Flip = 1 Band = 0 Mixer = 944.589620 MHz 2008-Jul-25 02:27:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.336331 MHz Flip = 1 Band = 0 Mixer = 942.632164 MHz 2008-Jul-25 02:27:25 LOG3 WAPP=1+3+4-save_rfcalc: Channel 5: Sky freq = 1381.336331 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Jul-25 02:27:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.336331 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Jul-25 02:27:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.336331 MHz Flip = 1 Band = 0 Mixer = 1978.000000 MHz 2008-Jul-25 02:27:25 LOG3 WAPP=1+3+4-save_rfcalc: Channel 8: Sky freq = 1381.336331 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2008-Jul-25 02:27:25 LOG3 WAPP=2-save_rfcalc: Channel 5: Sky freq = 1381.336331 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Jul-25 02:27:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.490 (still bad) 2008-Jul-25 02:27:25 LOG3 WAPP=2-save_rfcalc: Channel 8: Sky freq = 1381.336331 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2008-Jul-25 02:27:25 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jul-25 02:27:25 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jul-25 02:27:25 LOG5 end_task: Level: (5) ID = <10113> Status = 0 0 0 0 ok 2008-Jul-25 02:27:25 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jul-25 02:27:25 LOG5 end_task: Level: (4) ID = <10112> Status = 0 0 0 0 ok 2008-Jul-25 02:27:25 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Jul-25 02:27:25 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Jul-25 02:27:25 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Jul-25 02:27:25 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jul-25 02:27:25 LOG5 begin_task: Level: (4) ID = <10114> Status = 0 0 0 0 ok 2008-Jul-25 02:27:26 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jul-25 02:27:26 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jul-25 02:27:26 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jul-25 02:27:26 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jul-25 02:27:26 LOG5 end_task: Level: (4) ID = <10114> Status = 0 0 0 0 ok 2008-Jul-25 02:27:26 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Jul-25 02:27:26 LOG4 take_data: Calling 'take_data 5 5 CAL OFF -' 2008-Jul-25 02:27:26 START begin_task: Starting task 'WAPP spectral observation' 2008-Jul-25 02:27:26 LOG5 begin_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2008-Jul-25 02:27:26 LOG5 log_alfabeam: Parameters: 22.817611111111109 15.759333333333334 22.229154 2008.567015394073 88.599899 2008-Jul-25 02:27:26 LOG4 log_alfabeam: ALFABEAM 0 22.817611111111102 15.759333333333325 2008-Jul-25 02:27:26 LOG4 log_alfabeam: ALFABEAM 1 22.815577431607583 15.850307856713718 2008-Jul-25 02:27:26 LOG4 log_alfabeam: ALFABEAM 2 22.810534536982292 15.790015745071432 2008-Jul-25 02:27:26 LOG4 log_alfabeam: ALFABEAM 3 22.812523074436037 15.699214361534342 2008-Jul-25 02:27:26 LOG4 log_alfabeam: ALFABEAM 4 22.819577748065807 15.667644558803337 2008-Jul-25 02:27:26 LOG4 log_alfabeam: ALFABEAM 5 22.824686640094217 15.728650155803981 2008-Jul-25 02:27:26 LOG4 log_alfabeam: ALFABEAM 6 22.822674365097903 15.820514652807939 2008-Jul-25 02:27:26 INFO2 take_data: Starting WAPP scan: 820700006 2008-Jul-25 02:27:26 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Jul-25 02:27:26 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jul-25 02:27:26 LOG5 begin_task: Level: (5) ID = <10116> Status = 0 0 0 0 ok 2008-Jul-25 02:27:26 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jul-25 02:27:26 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23247.00 2008-Jul-25 02:27:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.490 (still bad) 2008-Jul-25 02:27:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.336331 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jul-25 02:27:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.336331 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 02:27:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.336331 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 02:27:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.336331 MHz Flip = 1 Band = 0 Mixer = 944.589620 MHz 2008-Jul-25 02:27:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.336331 MHz Flip = 1 Band = 0 Mixer = 942.632164 MHz 2008-Jul-25 02:27:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.336331 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Jul-25 02:27:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.336331 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Jul-25 02:27:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.336331 MHz Flip = 1 Band = 0 Mixer = 1978.000000 MHz 2008-Jul-25 02:27:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.336331 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2008-Jul-25 02:27:32 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Jul-25 02:27:32 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jul-25 02:27:32 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jul-25 02:27:32 LOG5 end_task: Level: (5) ID = <10116> Status = 0 0 0 0 ok 2008-Jul-25 02:27:32 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jul-25 02:27:32 LOG5 end_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2008-Jul-25 02:27:32 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Jul-25 02:27:32 STOP finish_task: Finishing task 'WAPP calibration' 2008-Jul-25 02:27:32 LOG5 finish_task: Level: (3) ID = <10106> Status = 0 0 0 0 ok 2008-Jul-25 02:27:32 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Jul-25 02:27:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-25 02:27:32 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Jul-25 02:27:32 LOG5 end_task: Level: (3) ID = <10106> Status = 0 0 0 0 ok 2008-Jul-25 02:27:33 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Jul-25 02:27:33 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 285.14 and ZA = 8.97 2008-Jul-25 02:27:33 LOG3 track_source: Calling 'track_source AGES7448_p3_090 285.14 8.9742871038 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Jul-25 02:27:33 START begin_task: Starting task 'sending tracking commands' 2008-Jul-25 02:27:33 LOG5 begin_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2008-Jul-25 02:27:33 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7448_p3_090} INFO {Slewing to source 'AGES7448_p3_090' ...} 2008-Jul-25 02:27:33 INFO1 track_source: Starting to track AGES7448_p3_090 2008-Jul-25 02:27:33 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7448_p3_090" 2008-Jul-25 02:27:33 LOG3 vw_send: To DATATAKING: set ra 285.14 2008-Jul-25 02:27:33 LOG3 vw_send: To DATATAKING: set dec 8.9742871038 2008-Jul-25 02:27:33 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Jul-25 02:27:33 LOG3 vw_send: To DATATAKING: pnt tr 285.14 8.9742871038 -CF 2008-Jul-25 02:27:33 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Jul-25 02:27:33 STOP finish_task: Finishing task 'sending tracking commands' 2008-Jul-25 02:27:33 LOG5 finish_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2008-Jul-25 02:27:33 INFO2 finish_task: DONE finished sending: tracking commands 2008-Jul-25 02:27:33 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-25 02:27:33 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Jul-25 02:27:33 LOG5 end_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2008-Jul-25 02:27:33 LOG1 fixed_driftmap: Parameters: HA = -00:36:00.8 Start = 22:14:26.2 LST = 22:13:52.0 diff = 34.2 secs 2008-Jul-25 02:27:33 INFO2 fixed_driftmap: Waiting 32.2 seconds for RA 22:50:27 2008-Jul-25 02:27:33 INFO2 lstwait: Waiting for 32.1 secs from LST 22:13:52 to LST 22:14:24 ... 2008-Jul-25 02:27:33 LOG4 send_obs_status: To obs_status: <1> TASKTIME 32.109658831936308 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Jul-25 02:27:33 START begin_task: Starting task 'waiting on wait on LST' 2008-Jul-25 02:27:33 LOG5 begin_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2008-Jul-25 02:27:33 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7448_p3_090" 2008-Jul-25 02:27:33 LOG4 got_cormsg: From DATATAKING: set ra 285.14 2008-Jul-25 02:27:33 LOG4 got_cormsg: From DATATAKING: set dec 8.9742871038 2008-Jul-25 02:27:33 LOG4 got_cormsg: From DATATAKING: vw% 285.14 2008-Jul-25 02:27:33 LOG4 got_cormsg: From DATATAKING: vw% 8.9742871038 2008-Jul-25 02:27:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 02:27:33 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Jul-25 02:27:33 LOG4 got_cormsg: From DATATAKING: pnt tr 285.14 8.9742871038 -CF 2008-Jul-25 02:27:33 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Jul-25 02:27:33 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Jul-25 02:27:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 02:27:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2008-Jul-25 02:28:05 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Jul-25 02:28:05 LOG5 end_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2008-Jul-25 02:28:05 LOG4 lstwait: Finished waiting 0.89 seconds late 2008-Jul-25 02:28:05 INFO3 lstwait: Finished waiting 2008-Jul-25 02:28:05 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Jul-25 02:28:05 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Jul-25 02:28:05 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Jul-25 02:28:05 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Jul-25 02:28:05 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Jul-25 02:28:05 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ -' 2008-Jul-25 02:28:05 START begin_task: Starting task 'WAPP spectral observation' 2008-Jul-25 02:28:05 LOG5 begin_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2008-Jul-25 02:28:05 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jul-25 02:28:05 INFO2 take_data: Starting WAPP scan: 820700007 2008-Jul-25 02:28:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Jul-25 02:28:06 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jul-25 02:28:06 LOG5 begin_task: Level: (4) ID = <10120> Status = 0 0 0 0 ok 2008-Jul-25 02:28:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jul-25 02:28:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23287.00 2008-Jul-25 02:28:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.336331 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jul-25 02:28:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.336331 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 02:28:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.336331 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 02:28:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.336331 MHz Flip = 1 Band = 0 Mixer = 944.589620 MHz 2008-Jul-25 02:28:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.336331 MHz Flip = 1 Band = 0 Mixer = 942.632164 MHz 2008-Jul-25 02:28:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.336331 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Jul-25 02:28:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.336331 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Jul-25 02:28:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.336331 MHz Flip = 1 Band = 0 Mixer = 1978.000000 MHz 2008-Jul-25 02:28:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.336331 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2008-Jul-25 02:28:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2008-Jul-25 02:28:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2008-Jul-25 02:28:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2008-Jul-25 02:28:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2008-Jul-25 02:28:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2008-Jul-25 02:28:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2008-Jul-25 02:28:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 02:28:20 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 1.094 0.961 2008-Jul-25 02:28:20 LOG4 check_wapp_levels: WAPP-2 power levels: 0.070 0.014 0.014 0.036 2008-Jul-25 02:28:20 LOG4 check_wapp_levels: WAPP-3 power levels: 0.105 0.014 0.026 0.014 2008-Jul-25 02:28:20 LOG4 check_wapp_levels: WAPP-4 power levels: 0.939 0.929 1.032 1.032 2008-Jul-25 02:28:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2008-Jul-25 02:28:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-25 02:28:25 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 02:28:25.302 (seconds: 8905.302)!} 2008-Jul-25 02:28:25 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 02:28:25.302 (seconds: 8905.302)! 2008-Jul-25 02:28:26 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 8904.0 to 8905.0! 2008-Jul-25 02:28:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2008-Jul-25 02:28:27 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (8904.0 - 8906.0)! 2008-Jul-25 02:28:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2008-Jul-25 02:28:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2008-Jul-25 02:28:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2008-Jul-25 02:28:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2008-Jul-25 02:28:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-25 02:28:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2008-Jul-25 02:28:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2008-Jul-25 02:28:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2008-Jul-25 02:28:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2008-Jul-25 02:28:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2008-Jul-25 02:28:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2008-Jul-25 02:28:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2008-Jul-25 02:28:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2008-Jul-25 02:28:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2008-Jul-25 02:28:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2008-Jul-25 02:28:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2008-Jul-25 02:29:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-25 02:29:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2008-Jul-25 02:29:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2008-Jul-25 02:29:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2008-Jul-25 02:29:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2008-Jul-25 02:29:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2008-Jul-25 02:29:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2008-Jul-25 02:29:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2008-Jul-25 02:29:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2008-Jul-25 02:29:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2008-Jul-25 02:29:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 02:29:21 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 1.095 0.963 2008-Jul-25 02:29:21 LOG4 check_wapp_levels: WAPP-2 power levels: 0.070 0.014 0.014 0.036 2008-Jul-25 02:29:21 LOG4 check_wapp_levels: WAPP-3 power levels: 0.105 0.014 0.026 0.014 2008-Jul-25 02:29:21 LOG4 check_wapp_levels: WAPP-4 power levels: 0.938 0.929 1.032 1.031 2008-Jul-25 02:29:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2008-Jul-25 02:29:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2008-Jul-25 02:29:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2008-Jul-25 02:29:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2008-Jul-25 02:29:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2008-Jul-25 02:29:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2008-Jul-25 02:29:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2008-Jul-25 02:29:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2008-Jul-25 02:29:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2008-Jul-25 02:29:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2008-Jul-25 02:29:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2008-Jul-25 02:29:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2008-Jul-25 02:29:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2008-Jul-25 02:29:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2008-Jul-25 02:29:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2008-Jul-25 02:29:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2008-Jul-25 02:29:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2008-Jul-25 02:29:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2008-Jul-25 02:29:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2008-Jul-25 02:30:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2008-Jul-25 02:30:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2008-Jul-25 02:30:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2008-Jul-25 02:30:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2008-Jul-25 02:30:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2008-Jul-25 02:30:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2008-Jul-25 02:30:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2008-Jul-25 02:30:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2008-Jul-25 02:30:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2008-Jul-25 02:30:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2008-Jul-25 02:30:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2008-Jul-25 02:30:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 02:30:23 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 1.097 0.966 2008-Jul-25 02:30:23 LOG4 check_wapp_levels: WAPP-2 power levels: 0.071 0.014 0.014 0.037 2008-Jul-25 02:30:23 LOG4 check_wapp_levels: WAPP-3 power levels: 0.105 0.014 0.026 0.014 2008-Jul-25 02:30:23 LOG4 check_wapp_levels: WAPP-4 power levels: 0.946 0.934 1.039 1.038 2008-Jul-25 02:30:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-25 02:30:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2008-Jul-25 02:30:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2008-Jul-25 02:30:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2008-Jul-25 02:30:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2008-Jul-25 02:30:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2008-Jul-25 02:30:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2008-Jul-25 02:30:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2008-Jul-25 02:30:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2008-Jul-25 02:30:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2008-Jul-25 02:30:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2008-Jul-25 02:30:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2008-Jul-25 02:30:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2008-Jul-25 02:30:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-25 02:30:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2008-Jul-25 02:30:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2008-Jul-25 02:30:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-25 02:31:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2008-Jul-25 02:31:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2008-Jul-25 02:31:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2008-Jul-25 02:31:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2008-Jul-25 02:31:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-25 02:31:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2008-Jul-25 02:31:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2008-Jul-25 02:31:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2008-Jul-25 02:31:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2008-Jul-25 02:31:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2008-Jul-25 02:31:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-25 02:31:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2008-Jul-25 02:31:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 02:31:24 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 1.099 0.967 2008-Jul-25 02:31:24 LOG4 check_wapp_levels: WAPP-2 power levels: 0.071 0.014 0.014 0.037 2008-Jul-25 02:31:24 LOG4 check_wapp_levels: WAPP-3 power levels: 0.107 0.014 0.026 0.014 2008-Jul-25 02:31:24 LOG4 check_wapp_levels: WAPP-4 power levels: 0.951 0.936 1.043 1.042 2008-Jul-25 02:31:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2008-Jul-25 02:31:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2008-Jul-25 02:31:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2008-Jul-25 02:31:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2008-Jul-25 02:31:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2008-Jul-25 02:31:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2008-Jul-25 02:31:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2008-Jul-25 02:31:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2008-Jul-25 02:31:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2008-Jul-25 02:31:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2008-Jul-25 02:31:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2008-Jul-25 02:31:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2008-Jul-25 02:31:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2008-Jul-25 02:31:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2008-Jul-25 02:31:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2008-Jul-25 02:31:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2008-Jul-25 02:31:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-25 02:32:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2008-Jul-25 02:32:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-25 02:32:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2008-Jul-25 02:32:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2008-Jul-25 02:32:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-25 02:32:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-25 02:32:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2008-Jul-25 02:32:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2008-Jul-25 02:32:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-25 02:32:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2008-Jul-25 02:32:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-25 02:32:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-25 02:32:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 02:32:25 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 1.105 0.972 2008-Jul-25 02:32:25 LOG4 check_wapp_levels: WAPP-2 power levels: 0.072 0.014 0.014 0.040 2008-Jul-25 02:32:25 LOG4 check_wapp_levels: WAPP-3 power levels: 0.107 0.014 0.026 0.014 2008-Jul-25 02:32:25 LOG4 check_wapp_levels: WAPP-4 power levels: 0.947 0.935 1.040 1.038 2008-Jul-25 02:32:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2008-Jul-25 02:32:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2008-Jul-25 02:32:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2008-Jul-25 02:32:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2008-Jul-25 02:32:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2008-Jul-25 02:32:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2008-Jul-25 02:32:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2008-Jul-25 02:32:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2008-Jul-25 02:32:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2008-Jul-25 02:32:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2008-Jul-25 02:32:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2008-Jul-25 02:32:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2008-Jul-25 02:32:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2008-Jul-25 02:32:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2008-Jul-25 02:32:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2008-Jul-25 02:32:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2008-Jul-25 02:32:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2008-Jul-25 02:33:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2008-Jul-25 02:33:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2008-Jul-25 02:33:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2008-Jul-25 02:33:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2008-Jul-25 02:33:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2008-Jul-25 02:33:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2008-Jul-25 02:33:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2008-Jul-25 02:33:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2008-Jul-25 02:33:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-25 02:33:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-25 02:33:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2008-Jul-25 02:33:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2008-Jul-25 02:33:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2008-Jul-25 02:33:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 02:33:27 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 1.097 0.968 2008-Jul-25 02:33:27 LOG4 check_wapp_levels: WAPP-2 power levels: 0.070 0.014 0.014 0.036 2008-Jul-25 02:33:27 LOG4 check_wapp_levels: WAPP-3 power levels: 0.106 0.014 0.026 0.014 2008-Jul-25 02:33:27 LOG4 check_wapp_levels: WAPP-4 power levels: 0.944 0.930 1.035 1.032 2008-Jul-25 02:33:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2008-Jul-25 02:33:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2008-Jul-25 02:33:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2008-Jul-25 02:33:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2008-Jul-25 02:33:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2008-Jul-25 02:33:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2008-Jul-25 02:33:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2008-Jul-25 02:33:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2008-Jul-25 02:33:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2008-Jul-25 02:33:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2008-Jul-25 02:33:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-25 02:33:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2008-Jul-25 02:33:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2008-Jul-25 02:33:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2008-Jul-25 02:33:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2008-Jul-25 02:34:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2008-Jul-25 02:34:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-25 02:34:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-25 02:34:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-25 02:34:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2008-Jul-25 02:34:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2008-Jul-25 02:34:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2008-Jul-25 02:34:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-25 02:34:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-25 02:34:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-25 02:34:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2008-Jul-25 02:34:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2008-Jul-25 02:34:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2008-Jul-25 02:34:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2008-Jul-25 02:34:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 02:34:28 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 1.098 0.966 2008-Jul-25 02:34:28 LOG4 check_wapp_levels: WAPP-2 power levels: 0.070 0.014 0.014 0.036 2008-Jul-25 02:34:28 LOG4 check_wapp_levels: WAPP-3 power levels: 0.106 0.014 0.026 0.014 2008-Jul-25 02:34:28 LOG4 check_wapp_levels: WAPP-4 power levels: 0.947 0.931 1.041 1.032 2008-Jul-25 02:34:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2008-Jul-25 02:34:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2008-Jul-25 02:34:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2008-Jul-25 02:34:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2008-Jul-25 02:34:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2008-Jul-25 02:34:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-25 02:34:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2008-Jul-25 02:34:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-25 02:34:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-25 02:34:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2008-Jul-25 02:34:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-25 02:34:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-25 02:34:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2008-Jul-25 02:34:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2008-Jul-25 02:34:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-25 02:35:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-25 02:35:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-25 02:35:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2008-Jul-25 02:35:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2008-Jul-25 02:35:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2008-Jul-25 02:35:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2008-Jul-25 02:35:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2008-Jul-25 02:35:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-25 02:35:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-25 02:35:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2008-Jul-25 02:35:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-25 02:35:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2008-Jul-25 02:35:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2008-Jul-25 02:35:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2008-Jul-25 02:35:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 02:35:29 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 1.102 0.967 2008-Jul-25 02:35:29 LOG4 check_wapp_levels: WAPP-2 power levels: 0.070 0.014 0.014 0.036 2008-Jul-25 02:35:29 LOG4 check_wapp_levels: WAPP-3 power levels: 0.106 0.014 0.026 0.014 2008-Jul-25 02:35:29 LOG4 check_wapp_levels: WAPP-4 power levels: 0.957 0.936 1.049 1.040 2008-Jul-25 02:35:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2008-Jul-25 02:35:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2008-Jul-25 02:35:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2008-Jul-25 02:35:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2008-Jul-25 02:35:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2008-Jul-25 02:35:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2008-Jul-25 02:35:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2008-Jul-25 02:35:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2008-Jul-25 02:35:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2008-Jul-25 02:35:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2008-Jul-25 02:35:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2008-Jul-25 02:35:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2008-Jul-25 02:35:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2008-Jul-25 02:35:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2008-Jul-25 02:35:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2008-Jul-25 02:36:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2008-Jul-25 02:36:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2008-Jul-25 02:36:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-25 02:36:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2008-Jul-25 02:36:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2008-Jul-25 02:36:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-25 02:36:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2008-Jul-25 02:36:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2008-Jul-25 02:36:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2008-Jul-25 02:36:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2008-Jul-25 02:36:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2008-Jul-25 02:36:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2008-Jul-25 02:36:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2008-Jul-25 02:36:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-25 02:36:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 02:36:30 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 1.099 0.967 2008-Jul-25 02:36:30 LOG4 check_wapp_levels: WAPP-2 power levels: 0.070 0.014 0.014 0.036 2008-Jul-25 02:36:30 LOG4 check_wapp_levels: WAPP-3 power levels: 0.106 0.014 0.026 0.014 2008-Jul-25 02:36:30 LOG4 check_wapp_levels: WAPP-4 power levels: 0.948 0.927 1.040 1.030 2008-Jul-25 02:36:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2008-Jul-25 02:36:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2008-Jul-25 02:36:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-25 02:36:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2008-Jul-25 02:36:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2008-Jul-25 02:36:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2008-Jul-25 02:36:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2008-Jul-25 02:36:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2008-Jul-25 02:36:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2008-Jul-25 02:36:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-25 02:36:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2008-Jul-25 02:36:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2008-Jul-25 02:36:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2008-Jul-25 02:36:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2008-Jul-25 02:37:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-25 02:37:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-25 02:37:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2008-Jul-25 02:37:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2008-Jul-25 02:37:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2008-Jul-25 02:37:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2008-Jul-25 02:37:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-25 02:37:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-25 02:37:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2008-Jul-25 02:37:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2008-Jul-25 02:37:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2008-Jul-25 02:37:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2008-Jul-25 02:37:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2008-Jul-25 02:37:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2008-Jul-25 02:37:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-25 02:37:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2008-Jul-25 02:37:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 02:37:32 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 1.104 0.972 2008-Jul-25 02:37:32 LOG4 check_wapp_levels: WAPP-2 power levels: 0.071 0.014 0.014 0.036 2008-Jul-25 02:37:32 LOG4 check_wapp_levels: WAPP-3 power levels: 0.107 0.014 0.026 0.014 2008-Jul-25 02:37:32 LOG4 check_wapp_levels: WAPP-4 power levels: 0.951 0.930 1.043 1.033 2008-Jul-25 02:37:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2008-Jul-25 02:37:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2008-Jul-25 02:37:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2008-Jul-25 02:37:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2008-Jul-25 02:37:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2008-Jul-25 02:37:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2008-Jul-25 02:37:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2008-Jul-25 02:37:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2008-Jul-25 02:37:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2008-Jul-25 02:37:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2008-Jul-25 02:37:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2008-Jul-25 02:37:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2008-Jul-25 02:37:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-25 02:38:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2008-Jul-25 02:38:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2008-Jul-25 02:38:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2008-Jul-25 02:38:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2008-Jul-25 02:38:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2008-Jul-25 02:38:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2008-Jul-25 02:38:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2008-Jul-25 02:38:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2008-Jul-25 02:38:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2008-Jul-25 02:38:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2008-Jul-25 02:38:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2008-Jul-25 02:38:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-25 02:38:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2008-Jul-25 02:38:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-25 02:38:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2008-Jul-25 02:38:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2008-Jul-25 02:38:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 02:38:33 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 1.100 0.967 2008-Jul-25 02:38:33 LOG4 check_wapp_levels: WAPP-2 power levels: 0.070 0.014 0.014 0.036 2008-Jul-25 02:38:33 LOG4 check_wapp_levels: WAPP-3 power levels: 0.106 0.014 0.026 0.014 2008-Jul-25 02:38:33 LOG4 check_wapp_levels: WAPP-4 power levels: 0.949 0.926 1.041 1.027 2008-Jul-25 02:38:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2008-Jul-25 02:38:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2008-Jul-25 02:38:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2008-Jul-25 02:38:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-25 02:38:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2008-Jul-25 02:38:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2008-Jul-25 02:38:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2008-Jul-25 02:38:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2008-Jul-25 02:38:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2008-Jul-25 02:38:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-25 02:38:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2008-Jul-25 02:38:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-25 02:38:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2008-Jul-25 02:39:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2008-Jul-25 02:39:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2008-Jul-25 02:39:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2008-Jul-25 02:39:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2008-Jul-25 02:39:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2008-Jul-25 02:39:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2008-Jul-25 02:39:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2008-Jul-25 02:39:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2008-Jul-25 02:39:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-25 02:39:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2008-Jul-25 02:39:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2008-Jul-25 02:39:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2008-Jul-25 02:39:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2008-Jul-25 02:39:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2008-Jul-25 02:39:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2008-Jul-25 02:39:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2008-Jul-25 02:39:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 02:39:34 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 1.100 0.968 2008-Jul-25 02:39:34 LOG4 check_wapp_levels: WAPP-2 power levels: 0.070 0.014 0.014 0.036 2008-Jul-25 02:39:34 LOG4 check_wapp_levels: WAPP-3 power levels: 0.106 0.014 0.026 0.014 2008-Jul-25 02:39:34 LOG4 check_wapp_levels: WAPP-4 power levels: 0.951 0.927 1.044 1.029 2008-Jul-25 02:39:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2008-Jul-25 02:39:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2008-Jul-25 02:39:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2008-Jul-25 02:39:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2008-Jul-25 02:39:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2008-Jul-25 02:39:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-25 02:39:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2008-Jul-25 02:39:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2008-Jul-25 02:39:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2008-Jul-25 02:39:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2008-Jul-25 02:39:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2008-Jul-25 02:39:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-25 02:40:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2008-Jul-25 02:40:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2008-Jul-25 02:40:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2008-Jul-25 02:40:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2008-Jul-25 02:40:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2008-Jul-25 02:40:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2008-Jul-25 02:40:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2008-Jul-25 02:40:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2008-Jul-25 02:40:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2008-Jul-25 02:40:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2008-Jul-25 02:40:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2008-Jul-25 02:40:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2008-Jul-25 02:40:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2008-Jul-25 02:40:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2008-Jul-25 02:40:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2008-Jul-25 02:40:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2008-Jul-25 02:40:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2008-Jul-25 02:40:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2008-Jul-25 02:40:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 02:40:36 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 1.104 0.972 2008-Jul-25 02:40:36 LOG4 check_wapp_levels: WAPP-2 power levels: 0.071 0.014 0.014 0.037 2008-Jul-25 02:40:36 LOG4 check_wapp_levels: WAPP-3 power levels: 0.107 0.014 0.026 0.014 2008-Jul-25 02:40:36 LOG4 check_wapp_levels: WAPP-4 power levels: 0.956 0.929 1.048 1.032 2008-Jul-25 02:40:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2008-Jul-25 02:40:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2008-Jul-25 02:40:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2008-Jul-25 02:40:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2008-Jul-25 02:40:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2008-Jul-25 02:40:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2008-Jul-25 02:40:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2008-Jul-25 02:40:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2008-Jul-25 02:40:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2008-Jul-25 02:40:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2008-Jul-25 02:40:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2008-Jul-25 02:41:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2008-Jul-25 02:41:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2008-Jul-25 02:41:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2008-Jul-25 02:41:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2008-Jul-25 02:41:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2008-Jul-25 02:41:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2008-Jul-25 02:41:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2008-Jul-25 02:41:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2008-Jul-25 02:41:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2008-Jul-25 02:41:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2008-Jul-25 02:41:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2008-Jul-25 02:41:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2008-Jul-25 02:41:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2008-Jul-25 02:41:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2008-Jul-25 02:41:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2008-Jul-25 02:41:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2008-Jul-25 02:41:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2008-Jul-25 02:41:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2008-Jul-25 02:41:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 02:41:37 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 1.104 0.969 2008-Jul-25 02:41:37 LOG4 check_wapp_levels: WAPP-2 power levels: 0.071 0.014 0.014 0.037 2008-Jul-25 02:41:37 LOG4 check_wapp_levels: WAPP-3 power levels: 0.109 0.014 0.026 0.014 2008-Jul-25 02:41:37 LOG4 check_wapp_levels: WAPP-4 power levels: 0.960 0.934 1.054 1.037 2008-Jul-25 02:41:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2008-Jul-25 02:41:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2008-Jul-25 02:41:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2008-Jul-25 02:41:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2008-Jul-25 02:41:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2008-Jul-25 02:41:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2008-Jul-25 02:41:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2008-Jul-25 02:41:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2008-Jul-25 02:41:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2008-Jul-25 02:41:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2008-Jul-25 02:41:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2008-Jul-25 02:42:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2008-Jul-25 02:42:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2008-Jul-25 02:42:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2008-Jul-25 02:42:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2008-Jul-25 02:42:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2008-Jul-25 02:42:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2008-Jul-25 02:42:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2008-Jul-25 02:42:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2008-Jul-25 02:42:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2008-Jul-25 02:42:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2008-Jul-25 02:42:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2008-Jul-25 02:42:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2008-Jul-25 02:42:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2008-Jul-25 02:42:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2008-Jul-25 02:42:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2008-Jul-25 02:42:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2008-Jul-25 02:42:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2008-Jul-25 02:42:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2008-Jul-25 02:42:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 02:42:38 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 1.110 0.976 2008-Jul-25 02:42:38 LOG4 check_wapp_levels: WAPP-2 power levels: 0.073 0.014 0.014 0.041 2008-Jul-25 02:42:38 LOG4 check_wapp_levels: WAPP-3 power levels: 0.108 0.014 0.026 0.014 2008-Jul-25 02:42:38 LOG4 check_wapp_levels: WAPP-4 power levels: 0.961 0.932 1.054 1.036 2008-Jul-25 02:42:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2008-Jul-25 02:42:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2008-Jul-25 02:42:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2008-Jul-25 02:42:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2008-Jul-25 02:42:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2008-Jul-25 02:42:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2008-Jul-25 02:42:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2008-Jul-25 02:42:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2008-Jul-25 02:42:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2008-Jul-25 02:42:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2008-Jul-25 02:43:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2008-Jul-25 02:43:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2008-Jul-25 02:43:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2008-Jul-25 02:43:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2008-Jul-25 02:43:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2008-Jul-25 02:43:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2008-Jul-25 02:43:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2008-Jul-25 02:43:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2008-Jul-25 02:43:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2008-Jul-25 02:43:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2008-Jul-25 02:43:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2008-Jul-25 02:43:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2008-Jul-25 02:43:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2008-Jul-25 02:43:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2008-Jul-25 02:43:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2008-Jul-25 02:43:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2008-Jul-25 02:43:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2008-Jul-25 02:43:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2008-Jul-25 02:43:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2008-Jul-25 02:43:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 02:43:39 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 1.106 0.973 2008-Jul-25 02:43:39 LOG4 check_wapp_levels: WAPP-2 power levels: 0.072 0.014 0.014 0.037 2008-Jul-25 02:43:39 LOG4 check_wapp_levels: WAPP-3 power levels: 0.107 0.014 0.026 0.014 2008-Jul-25 02:43:39 LOG4 check_wapp_levels: WAPP-4 power levels: 0.959 0.930 1.053 1.032 2008-Jul-25 02:43:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2008-Jul-25 02:43:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2008-Jul-25 02:43:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2008-Jul-25 02:43:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2008-Jul-25 02:43:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2008-Jul-25 02:43:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2008-Jul-25 02:43:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2008-Jul-25 02:43:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2008-Jul-25 02:43:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2008-Jul-25 02:43:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2008-Jul-25 02:44:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2008-Jul-25 02:44:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2008-Jul-25 02:44:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2008-Jul-25 02:44:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2008-Jul-25 02:44:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2008-Jul-25 02:44:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2008-Jul-25 02:44:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2008-Jul-25 02:44:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2008-Jul-25 02:44:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2008-Jul-25 02:44:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2008-Jul-25 02:44:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2008-Jul-25 02:44:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2008-Jul-25 02:44:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2008-Jul-25 02:44:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2008-Jul-25 02:44:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2008-Jul-25 02:44:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2008-Jul-25 02:44:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2008-Jul-25 02:44:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2008-Jul-25 02:44:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2008-Jul-25 02:44:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2008-Jul-25 02:44:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 02:44:41 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 1.115 0.981 2008-Jul-25 02:44:41 LOG4 check_wapp_levels: WAPP-2 power levels: 0.071 0.014 0.014 0.036 2008-Jul-25 02:44:41 LOG4 check_wapp_levels: WAPP-3 power levels: 0.107 0.014 0.026 0.014 2008-Jul-25 02:44:41 LOG4 check_wapp_levels: WAPP-4 power levels: 0.955 0.927 1.049 1.030 2008-Jul-25 02:44:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2008-Jul-25 02:44:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2008-Jul-25 02:44:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2008-Jul-25 02:44:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2008-Jul-25 02:44:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2008-Jul-25 02:44:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2008-Jul-25 02:44:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2008-Jul-25 02:44:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2008-Jul-25 02:45:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2008-Jul-25 02:45:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2008-Jul-25 02:45:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2008-Jul-25 02:45:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2008-Jul-25 02:45:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2008-Jul-25 02:45:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2008-Jul-25 02:45:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2008-Jul-25 02:45:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2008-Jul-25 02:45:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2008-Jul-25 02:45:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2008-Jul-25 02:45:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2008-Jul-25 02:45:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2008-Jul-25 02:45:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2008-Jul-25 02:45:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2008-Jul-25 02:45:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2008-Jul-25 02:45:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2008-Jul-25 02:45:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2008-Jul-25 02:45:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2008-Jul-25 02:45:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2008-Jul-25 02:45:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2008-Jul-25 02:45:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2008-Jul-25 02:45:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 02:45:42 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 1.106 0.975 2008-Jul-25 02:45:42 LOG4 check_wapp_levels: WAPP-2 power levels: 0.071 0.014 0.014 0.036 2008-Jul-25 02:45:42 LOG4 check_wapp_levels: WAPP-3 power levels: 0.106 0.014 0.026 0.014 2008-Jul-25 02:45:42 LOG4 check_wapp_levels: WAPP-4 power levels: 0.956 0.927 1.050 1.031 2008-Jul-25 02:45:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2008-Jul-25 02:45:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2008-Jul-25 02:45:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2008-Jul-25 02:45:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2008-Jul-25 02:45:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2008-Jul-25 02:45:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2008-Jul-25 02:45:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2008-Jul-25 02:45:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2008-Jul-25 02:46:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2008-Jul-25 02:46:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2008-Jul-25 02:46:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2008-Jul-25 02:46:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2008-Jul-25 02:46:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2008-Jul-25 02:46:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2008-Jul-25 02:46:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2008-Jul-25 02:46:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2008-Jul-25 02:46:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2008-Jul-25 02:46:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2008-Jul-25 02:46:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2008-Jul-25 02:46:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2008-Jul-25 02:46:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2008-Jul-25 02:46:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2008-Jul-25 02:46:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2008-Jul-25 02:46:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2008-Jul-25 02:46:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2008-Jul-25 02:46:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2008-Jul-25 02:46:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2008-Jul-25 02:46:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2008-Jul-25 02:46:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2008-Jul-25 02:46:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 02:46:43 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 1.107 0.974 2008-Jul-25 02:46:43 LOG4 check_wapp_levels: WAPP-2 power levels: 0.072 0.014 0.014 0.037 2008-Jul-25 02:46:43 LOG4 check_wapp_levels: WAPP-3 power levels: 0.107 0.014 0.026 0.014 2008-Jul-25 02:46:43 LOG4 check_wapp_levels: WAPP-4 power levels: 0.959 0.928 1.053 1.032 2008-Jul-25 02:46:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2008-Jul-25 02:46:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2008-Jul-25 02:46:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2008-Jul-25 02:46:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2008-Jul-25 02:46:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2008-Jul-25 02:46:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2008-Jul-25 02:46:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2008-Jul-25 02:46:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2008-Jul-25 02:47:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2008-Jul-25 02:47:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2008-Jul-25 02:47:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2008-Jul-25 02:47:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2008-Jul-25 02:47:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2008-Jul-25 02:47:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2008-Jul-25 02:47:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2008-Jul-25 02:47:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2008-Jul-25 02:47:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2008-Jul-25 02:47:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2008-Jul-25 02:47:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2008-Jul-25 02:47:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2008-Jul-25 02:47:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2008-Jul-25 02:47:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2008-Jul-25 02:47:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2008-Jul-25 02:47:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2008-Jul-25 02:47:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2008-Jul-25 02:47:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2008-Jul-25 02:47:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2008-Jul-25 02:47:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2008-Jul-25 02:47:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2008-Jul-25 02:47:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2008-Jul-25 02:47:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 02:47:46 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 1.108 0.974 2008-Jul-25 02:47:46 LOG4 check_wapp_levels: WAPP-2 power levels: 0.071 0.014 0.014 0.037 2008-Jul-25 02:47:46 LOG4 check_wapp_levels: WAPP-3 power levels: 0.107 0.014 0.026 0.014 2008-Jul-25 02:47:46 LOG4 check_wapp_levels: WAPP-4 power levels: 0.962 0.929 1.054 1.033 2008-Jul-25 02:47:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2008-Jul-25 02:47:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2008-Jul-25 02:47:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2008-Jul-25 02:47:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2008-Jul-25 02:47:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2008-Jul-25 02:47:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2008-Jul-25 02:48:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2008-Jul-25 02:48:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2008-Jul-25 02:48:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2008-Jul-25 02:48:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2008-Jul-25 02:48:07 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jul-25 02:48:07 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jul-25 02:48:07 LOG5 end_task: Level: (4) ID = <10120> Status = 0 0 0 0 ok 2008-Jul-25 02:48:07 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jul-25 02:48:07 LOG5 end_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2008-Jul-25 02:48:07 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Jul-25 02:48:07 LOG5 finish_task: Level: (2) ID = <10086> Status = 0 0 0 0 ok 2008-Jul-25 02:48:07 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Jul-25 02:48:07 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Jul-25 02:48:07 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Jul-25 02:48:07 LOG5 end_task: Level: (2) ID = <10086> Status = 0 0 0 0 ok 2008-Jul-25 02:48:07 COMMAND run_command_line: EXECUTING command 19: 'ENDIF' 2008-Jul-25 02:48:07 COMMAND run_command_line: EXECUTING command 22: 'IF LSTSLEW(AGES7448_p3_092) < 223726 THEN' 2008-Jul-25 02:48:08 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES7448_p3_092) < 223726 2008-Jul-25 02:48:08 INFO5 is_if_valid: Condition parsed as: 22.605098000000002 < 22.623888888888889 2008-Jul-25 02:48:08 COMMAND run_command_line: EXECUTING command 23: 'FIXEDDRIFT az=309.41 alfaangle=64.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p3_092 ra=225000.00 dec=154230.00' 2008-Jul-25 02:48:08 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Jul-25 02:48:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2008-Jul-25 02:48:08 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Jul-25 02:48:08 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 309.41 64.3 hcorcal 5 tracking no first 1 AGES7448_p3_092 225000.00 154230.00 J 8500.0 Heliocentric velocity(optical)' 2008-Jul-25 02:48:08 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Jul-25 02:48:08 LOG5 begin_task: Level: (2) ID = <10121> Status = 0 0 0 0 ok 2008-Jul-25 02:48:08 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES7448_p3_090' 2008-Jul-25 02:48:08 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Jul-25 02:48:08 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES7448_p3_092} 2008-Jul-25 02:48:09 INFO3 fixed_driftmap: Sending telescope to Az = 309.41 and ZA = 4.05 2008-Jul-25 02:48:09 LOG3 track_source: Calling 'track_source AGES7448_p3_092 309.41 4.0517797508 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Jul-25 02:48:09 START begin_task: Starting task 'sending tracking commands' 2008-Jul-25 02:48:09 LOG5 begin_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2008-Jul-25 02:48:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7448_p3_092} INFO {Slewing to source 'AGES7448_p3_092' ...} 2008-Jul-25 02:48:09 INFO1 track_source: Starting to track AGES7448_p3_092 2008-Jul-25 02:48:09 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7448_p3_092" 2008-Jul-25 02:48:09 LOG3 vw_send: To DATATAKING: set ra 309.41 2008-Jul-25 02:48:09 LOG3 vw_send: To DATATAKING: set dec 4.0517797508 2008-Jul-25 02:48:09 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Jul-25 02:48:09 LOG3 vw_send: To DATATAKING: pnt tr 309.41 4.0517797508 -CF 2008-Jul-25 02:48:09 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Jul-25 02:48:09 STOP finish_task: Finishing task 'sending tracking commands' 2008-Jul-25 02:48:09 LOG5 finish_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2008-Jul-25 02:48:09 INFO2 finish_task: DONE finished sending: tracking commands 2008-Jul-25 02:48:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-25 02:48:09 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Jul-25 02:48:09 LOG5 end_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2008-Jul-25 02:48:09 START begin_task: Starting task 'rotate ALFA to +64.3 degrees' 2008-Jul-25 02:48:09 LOG5 begin_task: Level: (3) ID = <10123> Status = 0 0 0 0 ok 2008-Jul-25 02:48:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +64.3 degrees ...} 2008-Jul-25 02:48:09 INFO2 rotate_alfa: ALFA commanded to +64.3 degrees 2008-Jul-25 02:48:09 LOG3 sock_errsend: To ALFAMOTOR: POSITION 64.3 REPLY 2008-Jul-25 02:48:09 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Jul-25 02:48:09 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Jul-25 02:48:09 LOG5 begin_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2008-Jul-25 02:48:09 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7448_p3_092" 2008-Jul-25 02:48:09 LOG4 got_cormsg: From DATATAKING: set ra 309.41 2008-Jul-25 02:48:09 LOG4 got_cormsg: From DATATAKING: set dec 4.0517797508 2008-Jul-25 02:48:09 LOG4 got_cormsg: From DATATAKING: vw% 309.41 2008-Jul-25 02:48:09 LOG4 got_cormsg: From DATATAKING: vw% 4.0517797508 2008-Jul-25 02:48:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 02:48:09 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Jul-25 02:48:09 LOG4 got_cormsg: From DATATAKING: pnt tr 309.41 4.0517797508 -CF 2008-Jul-25 02:48:09 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Jul-25 02:48:09 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Jul-25 02:48:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 02:48:23 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Jul-25 02:48:23 INFO3 alfa_motor: ALFA rotator in-position +64.30 degrees 2008-Jul-25 02:48:24 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Jul-25 02:48:24 LOG5 end_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2008-Jul-25 02:48:24 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Jul-25 02:48:24 STOP finish_task: Finishing task 'rotate ALFA to +64.3 degrees' 2008-Jul-25 02:48:24 LOG5 finish_task: Level: (3) ID = <10123> Status = 0 0 0 0 ok 2008-Jul-25 02:48:24 INFO2 finish_task: DONE finished configuration: rotating ALFA to +64.3 degrees 2008-Jul-25 02:48:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-25 02:48:24 STOP end_task: Finishing task 'rotate ALFA to +64.3 degrees' with status 'OK' 2008-Jul-25 02:48:24 LOG5 end_task: Level: (3) ID = <10123> Status = 0 0 0 0 ok 2008-Jul-25 02:48:24 START begin_task: Starting task 'waiting on telescope' 2008-Jul-25 02:48:24 LOG5 begin_task: Level: (3) ID = <10125> Status = 0 0 0 0 ok 2008-Jul-25 02:48:24 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Jul-25 02:48:24 LOG3 waittrk: Start waittrk 5 2008-Jul-25 02:48:24 START begin_task: Starting task 'waiting on telescope movement' 2008-Jul-25 02:48:24 LOG5 begin_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2008-Jul-25 02:48:29 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Jul-25 02:48:29 LOG5 end_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2008-Jul-25 02:48:29 START begin_task: Starting task 'waiting on telescope on source' 2008-Jul-25 02:48:29 LOG5 begin_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2008-Jul-25 02:50:17 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Jul-25 02:50:17 LOG5 end_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2008-Jul-25 02:50:17 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Jul-25 02:50:17 INFO2 waittrk: Now tracking AGES7448_p3_092 2008-Jul-25 02:50:17 LOG4 waittrk: Current telescope position: Az = 668.86 ZA = 4.03 2008-Jul-25 02:50:17 STOP finish_task: Finishing task 'waiting on telescope' 2008-Jul-25 02:50:17 LOG5 finish_task: Level: (3) ID = <10125> Status = 0 0 0 0 ok 2008-Jul-25 02:50:17 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Jul-25 02:50:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-25 02:50:17 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Jul-25 02:50:17 LOG5 end_task: Level: (3) ID = <10125> Status = 0 0 0 0 ok 2008-Jul-25 02:50:17 START begin_task: Starting task 'selecting calibration type' 2008-Jul-25 02:50:17 LOG5 begin_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2008-Jul-25 02:50:17 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Jul-25 02:50:17 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Jul-25 02:50:17 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jul-25 02:50:17 START begin_task: Starting task 'waiting on setcal' 2008-Jul-25 02:50:17 LOG5 begin_task: Level: (4) ID = <10129> Status = 0 0 0 0 ok 2008-Jul-25 02:50:17 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Jul-25 02:50:17 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jul-25 02:50:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 02:50:18 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jul-25 02:50:18 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Jul-25 02:50:18 LOG5 end_task: Level: (4) ID = <10129> Status = 0 0 0 0 ok 2008-Jul-25 02:50:18 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Jul-25 02:50:18 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jul-25 02:50:18 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Jul-25 02:50:18 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jul-25 02:50:18 LOG5 begin_task: Level: (4) ID = <10130> Status = 0 0 0 0 ok 2008-Jul-25 02:50:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 02:50:18 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jul-25 02:50:18 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jul-25 02:50:18 LOG5 end_task: Level: (4) ID = <10130> Status = 0 0 0 0 ok 2008-Jul-25 02:50:18 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jul-25 02:50:18 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Jul-25 02:50:18 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jul-25 02:50:18 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Jul-25 02:50:18 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jul-25 02:50:18 LOG5 begin_task: Level: (4) ID = <10131> Status = 0 0 0 0 ok 2008-Jul-25 02:50:18 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jul-25 02:50:18 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jul-25 02:50:18 LOG5 end_task: Level: (4) ID = <10131> Status = 0 0 0 0 ok 2008-Jul-25 02:50:18 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jul-25 02:50:18 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Jul-25 02:50:18 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Jul-25 02:50:18 LOG5 end_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2008-Jul-25 02:50:18 LOG5 dopset_later: Calling 'dopset_later 44.737084831707911' 2008-Jul-25 02:50:18 INFO3 dopset_later: Setting Doppler correction for 02:51:03 (44.7 seconds from now) 2008-Jul-25 02:50:18 LOG5 antvel: Calling 'antvel 309.410000 4.051780 F 44.737084831707911' 2008-Jul-25 02:50:18 LOG2 antvel: Transforming current Az = 309.41 ZA = 4.05 to apparent RA = 22:50:26.9 Dec = +15:45:17.2 2008-Jul-25 02:50:18 LOG2 antvel: Parameters to Doppler: Heliocentric 24663 2008 207 0.0 2008-Jul-25 02:50:18 INFO5 antvel: Computed antenna velocity: -20.11467 km/s 2008-Jul-25 02:50:18 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-20.114667882399999 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Jul-25 02:50:18 INFO4 dopset_gen: New sky frequencies: 1381.336110 1381.336110 1381.336110 1381.336110 1381.336110 1381.336110 1381.336110 1381.336110 1381.336110 2008-Jul-25 02:50:18 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.336110 sky0=1381.336110 sky1=1381.336110 sky2=1381.336110 sky3=1381.336110 sky4=1381.336110 sky5=1381.336110 sky6=1381.336110 sky7=1381.336110 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jul-25 02:50:18 LOG2 dopset_gen: Result from 'sky2syn': 1631.336110 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jul-25 02:50:18 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631336110.0} 2008-Jul-25 02:50:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 02:50:18 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Jul-25 02:50:18 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Jul-25 02:50:18 INFO5 fixed_driftmap: Tracking J2000 position: RA = 22:49:19.8 Dec = +15:42:33.5 2008-Jul-25 02:50:18 LOG3 track_source: Calling 'track_source AGES7448_p3_092 224919.8 154233.5 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Jul-25 02:50:18 START begin_task: Starting task 'sending tracking commands' 2008-Jul-25 02:50:18 LOG5 begin_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2008-Jul-25 02:50:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7448_p3_092} INFO {Slewing to source 'AGES7448_p3_092' ...} 2008-Jul-25 02:50:18 INFO1 track_source: Starting to track AGES7448_p3_092 2008-Jul-25 02:50:18 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7448_p3_092" 2008-Jul-25 02:50:19 LOG3 vw_send: To DATATAKING: set ra 224919.8 2008-Jul-25 02:50:19 LOG3 vw_send: To DATATAKING: set dec 154233.5 2008-Jul-25 02:50:19 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Jul-25 02:50:19 LOG3 vw_send: To DATATAKING: pnt tr 224919.8 154233.5 -CJ 2008-Jul-25 02:50:19 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Jul-25 02:50:19 STOP finish_task: Finishing task 'sending tracking commands' 2008-Jul-25 02:50:19 LOG5 finish_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2008-Jul-25 02:50:19 INFO2 finish_task: DONE finished sending: tracking commands 2008-Jul-25 02:50:19 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-25 02:50:19 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Jul-25 02:50:19 LOG5 end_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2008-Jul-25 02:50:19 START begin_task: Starting task 'waiting on telescope' 2008-Jul-25 02:50:19 LOG5 begin_task: Level: (3) ID = <10133> Status = 0 0 0 0 ok 2008-Jul-25 02:50:19 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Jul-25 02:50:19 LOG3 waittrk: Start waittrk 5 2008-Jul-25 02:50:19 START begin_task: Starting task 'waiting on telescope movement' 2008-Jul-25 02:50:19 LOG5 begin_task: Level: (4) ID = <10134> Status = 0 0 0 0 ok 2008-Jul-25 02:50:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631336110.0} 2008-Jul-25 02:50:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 02:50:19 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Jul-25 02:50:19 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7448_p3_092" 2008-Jul-25 02:50:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 02:50:19 LOG4 got_cormsg: From DATATAKING: set ra 224919.8 2008-Jul-25 02:50:19 LOG4 got_cormsg: From DATATAKING: set dec 154233.5 2008-Jul-25 02:50:19 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Jul-25 02:50:19 LOG4 got_cormsg: From DATATAKING: pnt tr 224919.8 154233.5 -CJ 2008-Jul-25 02:50:19 LOG4 got_cormsg: From DATATAKING: 224919.8 2008-Jul-25 02:50:19 LOG4 got_cormsg: From DATATAKING: vw% 154233.5 2008-Jul-25 02:50:19 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2008-Jul-25 02:50:19 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Jul-25 02:50:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 02:50:24 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Jul-25 02:50:24 LOG5 end_task: Level: (4) ID = <10134> Status = 0 0 0 0 ok 2008-Jul-25 02:50:24 START begin_task: Starting task 'waiting on telescope on source' 2008-Jul-25 02:50:24 LOG5 begin_task: Level: (4) ID = <10135> Status = 0 0 0 0 ok 2008-Jul-25 02:50:26 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Jul-25 02:50:26 LOG5 end_task: Level: (4) ID = <10135> Status = 0 0 0 0 ok 2008-Jul-25 02:50:26 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Jul-25 02:50:26 INFO2 waittrk: Now tracking AGES7448_p3_092 2008-Jul-25 02:50:26 LOG4 waittrk: Current telescope position: Az = 669.00 ZA = 4.02 2008-Jul-25 02:50:26 STOP finish_task: Finishing task 'waiting on telescope' 2008-Jul-25 02:50:26 LOG5 finish_task: Level: (3) ID = <10133> Status = 0 0 0 0 ok 2008-Jul-25 02:50:26 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Jul-25 02:50:26 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-25 02:50:26 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Jul-25 02:50:26 LOG5 end_task: Level: (3) ID = <10133> Status = 0 0 0 0 ok 2008-Jul-25 02:50:26 START begin_task: Starting task 'adjusting WAPP power' 2008-Jul-25 02:50:26 LOG5 begin_task: Level: (3) ID = <10136> Status = 0 0 0 0 ok 2008-Jul-25 02:50:26 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Jul-25 02:50:26 INFO2 adjust_power: Starting to adjust WAPP power 2008-Jul-25 02:50:26 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Jul-25 02:50:26 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Jul-25 02:50:26 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jul-25 02:50:26 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Jul-25 02:50:26 LOG5 begin_task: Level: (4) ID = <10137> Status = 0 0 0 0 ok 2008-Jul-25 02:50:26 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Jul-25 02:50:26 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jul-25 02:50:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 02:50:29 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jul-25 02:50:29 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Jul-25 02:50:29 LOG5 end_task: Level: (4) ID = <10137> Status = 0 0 0 0 ok 2008-Jul-25 02:50:29 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Jul-25 02:50:29 START begin_task: Starting task 'adjusting WAPP power' 2008-Jul-25 02:50:29 LOG5 begin_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2008-Jul-25 02:50:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Jul-25 02:50:29 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Jul-25 02:50:29 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Jul-25 02:50:29 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Jul-25 02:50:29 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Jul-25 02:50:29 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Jul-25 02:50:29 LOG5 begin_task: Level: (5) ID = <10139> Status = 0 0 0 0 ok 2008-Jul-25 02:50:29 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Jul-25 02:50:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 02:50:30 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 0 0 dB --- beam 1: 5 1 dB 2008-Jul-25 02:50:30 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 0 dB --- beam 5: 0 0 dB 2008-Jul-25 02:50:30 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 2 dB --- beam 7: 1 2 dB 2008-Jul-25 02:50:30 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 0 0 dB --- beam 3: 0 0 dB 2008-Jul-25 02:50:30 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Jul-25 02:50:30 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Jul-25 02:50:30 LOG5 end_task: Level: (5) ID = <10139> Status = 0 0 0 0 ok 2008-Jul-25 02:50:30 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.022 0.018 ALFA beam 1: 1.074 0.961 2008-Jul-25 02:50:30 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.068 0.014 ALFA beam 3: 0.014 0.036 2008-Jul-25 02:50:30 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.104 0.014 ALFA beam 5: 0.026 0.014 2008-Jul-25 02:50:30 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.944 0.913 ALFA beam 7: 1.039 1.015 2008-Jul-25 02:50:30 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Jul-25 02:50:30 LOG5 finish_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2008-Jul-25 02:50:30 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Jul-25 02:50:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-25 02:50:30 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Jul-25 02:50:30 LOG5 end_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2008-Jul-25 02:50:30 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Jul-25 02:50:30 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Jul-25 02:50:30 LOG5 finish_task: Level: (3) ID = <10136> Status = 0 0 0 0 ok 2008-Jul-25 02:50:30 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Jul-25 02:50:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-25 02:50:30 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Jul-25 02:50:30 LOG5 end_task: Level: (3) ID = <10136> Status = 0 0 0 0 ok 2008-Jul-25 02:50:30 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 JID 2008-Jul-25 02:50:30 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 JID 2008-Jul-25 02:50:30 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 JID 2008-Jul-25 02:50:30 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 JID 2008-Jul-25 02:50:30 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Jul-25 02:50:30 START begin_task: Starting task 'WAPP calibration' 2008-Jul-25 02:50:30 LOG5 begin_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2008-Jul-25 02:50:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Jul-25 02:50:30 START begin_task: Starting task 'selecting calibration type' 2008-Jul-25 02:50:30 LOG5 begin_task: Level: (4) ID = <10141> Status = 0 0 0 0 ok 2008-Jul-25 02:50:30 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Jul-25 02:50:30 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Jul-25 02:50:30 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jul-25 02:50:30 START begin_task: Starting task 'waiting on setcal' 2008-Jul-25 02:50:30 LOG5 begin_task: Level: (5) ID = <10142> Status = 0 0 0 0 ok 2008-Jul-25 02:50:30 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 JID' 2008-Jul-25 02:50:30 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Jul-25 02:50:30 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jul-25 02:50:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 02:50:30 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jul-25 02:50:30 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Jul-25 02:50:30 LOG5 end_task: Level: (5) ID = <10142> Status = 0 0 0 0 ok 2008-Jul-25 02:50:30 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Jul-25 02:50:30 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jul-25 02:50:30 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Jul-25 02:50:30 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jul-25 02:50:30 LOG5 begin_task: Level: (5) ID = <10143> Status = 0 0 0 0 ok 2008-Jul-25 02:50:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 02:50:31 NOTE WAPPDATA-new_file: New FITS file: wapp.20080725.a2048.0002.fits 2008-Jul-25 02:50:31 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080725.a2048.0002.fits} 2008-Jul-25 02:50:31 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jul-25 02:50:31 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jul-25 02:50:31 LOG5 end_task: Level: (5) ID = <10143> Status = 0 0 0 0 ok 2008-Jul-25 02:50:31 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jul-25 02:50:31 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Jul-25 02:50:31 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jul-25 02:50:31 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Jul-25 02:50:31 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jul-25 02:50:31 LOG5 begin_task: Level: (5) ID = <10144> Status = 0 0 0 0 ok 2008-Jul-25 02:50:31 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jul-25 02:50:31 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jul-25 02:50:31 LOG5 end_task: Level: (5) ID = <10144> Status = 0 0 0 0 ok 2008-Jul-25 02:50:31 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jul-25 02:50:31 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Jul-25 02:50:31 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Jul-25 02:50:31 LOG5 end_task: Level: (4) ID = <10141> Status = 0 0 0 0 ok 2008-Jul-25 02:50:31 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Jul-25 02:50:31 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Jul-25 02:50:31 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Jul-25 02:50:31 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jul-25 02:50:31 LOG5 begin_task: Level: (4) ID = <10145> Status = 0 0 0 0 ok 2008-Jul-25 02:50:31 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jul-25 02:50:31 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Jul-25 02:50:31 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jul-25 02:50:31 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jul-25 02:50:31 LOG5 end_task: Level: (4) ID = <10145> Status = 0 0 0 0 ok 2008-Jul-25 02:50:31 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Jul-25 02:50:31 LOG4 take_data: Calling 'take_data 5 5 CAL ON -' 2008-Jul-25 02:50:31 START begin_task: Starting task 'WAPP spectral observation' 2008-Jul-25 02:50:31 LOG5 begin_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2008-Jul-25 02:50:31 LOG5 log_alfabeam: Parameters: 22.822166666666664 15.709305555555554 22.615208 2008.5670593137629 64.299980 2008-Jul-25 02:50:31 LOG4 log_alfabeam: ALFABEAM 0 22.822166666666654 15.709305555555551 2008-Jul-25 02:50:31 LOG4 log_alfabeam: ALFABEAM 1 22.819801632122630 15.805192322026693 2008-Jul-25 02:50:31 LOG4 log_alfabeam: ALFABEAM 2 22.815363278403701 15.742812704689193 2008-Jul-25 02:50:31 LOG4 log_alfabeam: ALFABEAM 3 22.817583574196444 15.646264571632104 2008-Jul-25 02:50:31 LOG4 log_alfabeam: ALFABEAM 4 22.824393109655436 15.612135620021817 2008-Jul-25 02:50:31 LOG4 log_alfabeam: ALFABEAM 5 22.829032887052726 15.677438536702338 2008-Jul-25 02:50:31 LOG4 log_alfabeam: ALFABEAM 6 22.826660732332236 15.773945664567053 2008-Jul-25 02:50:31 INFO2 take_data: Starting WAPP scan: 820700008 2008-Jul-25 02:50:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Jul-25 02:50:32 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jul-25 02:50:32 LOG5 begin_task: Level: (5) ID = <10147> Status = 0 0 0 0 ok 2008-Jul-25 02:50:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jul-25 02:50:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 02:50:32 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 1.074 0.961 2008-Jul-25 02:50:32 LOG4 check_wapp_levels: WAPP-2 power levels: 0.068 0.014 0.014 0.036 2008-Jul-25 02:50:32 LOG4 check_wapp_levels: WAPP-3 power levels: 0.104 0.014 0.026 0.014 2008-Jul-25 02:50:32 LOG4 check_wapp_levels: WAPP-4 power levels: 0.944 0.913 1.039 1.015 2008-Jul-25 02:50:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24633.00 2008-Jul-25 02:50:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.336110 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jul-25 02:50:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.336110 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 02:50:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.336110 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 02:50:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.336110 MHz Flip = 1 Band = 0 Mixer = 944.589620 MHz 2008-Jul-25 02:50:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.479 (still bad) 2008-Jul-25 02:50:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.336110 MHz Flip = 1 Band = 0 Mixer = 942.632164 MHz 2008-Jul-25 02:50:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.336110 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Jul-25 02:50:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.336110 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Jul-25 02:50:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.336110 MHz Flip = 1 Band = 0 Mixer = 1978.000000 MHz 2008-Jul-25 02:50:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.336110 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2008-Jul-25 02:50:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jul-25 02:50:38 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jul-25 02:50:38 LOG5 end_task: Level: (5) ID = <10147> Status = 0 0 0 0 ok 2008-Jul-25 02:50:38 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jul-25 02:50:38 LOG5 end_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2008-Jul-25 02:50:38 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Jul-25 02:50:38 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Jul-25 02:50:38 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Jul-25 02:50:38 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jul-25 02:50:38 LOG5 begin_task: Level: (4) ID = <10148> Status = 0 0 0 0 ok 2008-Jul-25 02:50:39 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jul-25 02:50:39 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jul-25 02:50:39 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jul-25 02:50:39 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jul-25 02:50:39 LOG5 end_task: Level: (4) ID = <10148> Status = 0 0 0 0 ok 2008-Jul-25 02:50:39 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Jul-25 02:50:39 LOG4 take_data: Calling 'take_data 5 5 CAL OFF -' 2008-Jul-25 02:50:39 START begin_task: Starting task 'WAPP spectral observation' 2008-Jul-25 02:50:39 LOG5 begin_task: Level: (4) ID = <10149> Status = 0 0 0 0 ok 2008-Jul-25 02:50:39 LOG5 log_alfabeam: Parameters: 22.822166666666664 15.709305555555554 22.617158 2008.5670595355793 64.299980 2008-Jul-25 02:50:39 LOG4 log_alfabeam: ALFABEAM 0 22.822166666666654 15.709305555555558 2008-Jul-25 02:50:39 LOG4 log_alfabeam: ALFABEAM 1 22.819830822415476 15.805339716384347 2008-Jul-25 02:50:39 LOG4 log_alfabeam: ALFABEAM 2 22.815373832069685 15.743253501302521 2008-Jul-25 02:50:39 LOG4 log_alfabeam: ALFABEAM 3 22.817563977696196 15.646563737407785 2008-Jul-25 02:50:39 LOG4 log_alfabeam: ALFABEAM 4 22.824362821649320 15.611990355207148 2008-Jul-25 02:50:39 LOG4 log_alfabeam: ALFABEAM 5 22.829023176278103 15.677002684341829 2008-Jul-25 02:50:39 LOG4 log_alfabeam: ALFABEAM 6 22.826680339706279 15.773660880957195 2008-Jul-25 02:50:39 INFO2 take_data: Starting WAPP scan: 820700009 2008-Jul-25 02:50:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Jul-25 02:50:39 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jul-25 02:50:39 LOG5 begin_task: Level: (5) ID = <10150> Status = 0 0 0 0 ok 2008-Jul-25 02:50:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jul-25 02:50:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24640.00 2008-Jul-25 02:50:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.479 (still bad) 2008-Jul-25 02:50:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.336110 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jul-25 02:50:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.336110 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 02:50:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.336110 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 02:50:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.336110 MHz Flip = 1 Band = 0 Mixer = 944.589620 MHz 2008-Jul-25 02:50:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.336110 MHz Flip = 1 Band = 0 Mixer = 942.632164 MHz 2008-Jul-25 02:50:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.336110 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Jul-25 02:50:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.336110 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Jul-25 02:50:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.336110 MHz Flip = 1 Band = 0 Mixer = 1978.000000 MHz 2008-Jul-25 02:50:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.336110 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2008-Jul-25 02:50:45 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Jul-25 02:50:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jul-25 02:50:45 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jul-25 02:50:45 LOG5 end_task: Level: (5) ID = <10150> Status = 0 0 0 0 ok 2008-Jul-25 02:50:45 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jul-25 02:50:45 LOG5 end_task: Level: (4) ID = <10149> Status = 0 0 0 0 ok 2008-Jul-25 02:50:45 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Jul-25 02:50:45 STOP finish_task: Finishing task 'WAPP calibration' 2008-Jul-25 02:50:45 LOG5 finish_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2008-Jul-25 02:50:45 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Jul-25 02:50:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-25 02:50:45 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Jul-25 02:50:45 LOG5 end_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2008-Jul-25 02:50:46 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Jul-25 02:50:46 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 309.41 and ZA = 4.05 2008-Jul-25 02:50:46 LOG3 track_source: Calling 'track_source AGES7448_p3_092 309.41 4.0517797508 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Jul-25 02:50:46 START begin_task: Starting task 'sending tracking commands' 2008-Jul-25 02:50:46 LOG5 begin_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2008-Jul-25 02:50:46 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7448_p3_092} INFO {Slewing to source 'AGES7448_p3_092' ...} 2008-Jul-25 02:50:46 INFO1 track_source: Starting to track AGES7448_p3_092 2008-Jul-25 02:50:46 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7448_p3_092" 2008-Jul-25 02:50:46 LOG3 vw_send: To DATATAKING: set ra 309.41 2008-Jul-25 02:50:46 LOG3 vw_send: To DATATAKING: set dec 4.0517797508 2008-Jul-25 02:50:46 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Jul-25 02:50:46 LOG3 vw_send: To DATATAKING: pnt tr 309.41 4.0517797508 -CF 2008-Jul-25 02:50:46 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Jul-25 02:50:46 STOP finish_task: Finishing task 'sending tracking commands' 2008-Jul-25 02:50:46 LOG5 finish_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2008-Jul-25 02:50:46 INFO2 finish_task: DONE finished sending: tracking commands 2008-Jul-25 02:50:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-25 02:50:46 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Jul-25 02:50:46 LOG5 end_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2008-Jul-25 02:50:46 LOG1 fixed_driftmap: Parameters: HA = -00:13:00.4 Start = 22:37:26.6 LST = 22:37:08.8 diff = 17.8 secs 2008-Jul-25 02:50:46 INFO2 fixed_driftmap: Waiting 15.8 seconds for RA 22:50:27 2008-Jul-25 02:50:46 INFO2 lstwait: Waiting for 15.7 secs from LST 22:37:09 to LST 22:37:25 ... 2008-Jul-25 02:50:46 LOG4 send_obs_status: To obs_status: <1> TASKTIME 15.744463020515678 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Jul-25 02:50:46 START begin_task: Starting task 'waiting on wait on LST' 2008-Jul-25 02:50:46 LOG5 begin_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2008-Jul-25 02:50:46 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7448_p3_092" 2008-Jul-25 02:50:46 LOG4 got_cormsg: From DATATAKING: set ra 309.41 2008-Jul-25 02:50:46 LOG4 got_cormsg: From DATATAKING: set dec 4.0517797508 2008-Jul-25 02:50:46 LOG4 got_cormsg: From DATATAKING: vw% 309.41 2008-Jul-25 02:50:46 LOG4 got_cormsg: From DATATAKING: vw% 4.0517797508 2008-Jul-25 02:50:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 02:50:46 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Jul-25 02:50:46 LOG4 got_cormsg: From DATATAKING: pnt tr 309.41 4.0517797508 -CF 2008-Jul-25 02:50:46 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Jul-25 02:50:46 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Jul-25 02:50:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 02:50:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2008-Jul-25 02:51:02 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Jul-25 02:51:02 LOG5 end_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2008-Jul-25 02:51:02 LOG4 lstwait: Finished waiting 0.26 seconds late 2008-Jul-25 02:51:02 INFO3 lstwait: Finished waiting 2008-Jul-25 02:51:02 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Jul-25 02:51:02 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Jul-25 02:51:02 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Jul-25 02:51:02 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Jul-25 02:51:02 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Jul-25 02:51:02 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ -' 2008-Jul-25 02:51:02 START begin_task: Starting task 'WAPP spectral observation' 2008-Jul-25 02:51:02 LOG5 begin_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2008-Jul-25 02:51:02 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jul-25 02:51:02 INFO2 take_data: Starting WAPP scan: 820700010 2008-Jul-25 02:51:02 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Jul-25 02:51:02 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jul-25 02:51:02 LOG5 begin_task: Level: (4) ID = <10154> Status = 0 0 0 0 ok 2008-Jul-25 02:51:02 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jul-25 02:51:02 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24663.00 2008-Jul-25 02:51:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.336110 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jul-25 02:51:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.336110 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 02:51:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.336110 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 02:51:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.336110 MHz Flip = 1 Band = 0 Mixer = 944.589620 MHz 2008-Jul-25 02:51:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.336110 MHz Flip = 1 Band = 0 Mixer = 942.632164 MHz 2008-Jul-25 02:51:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.336110 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Jul-25 02:51:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.336110 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Jul-25 02:51:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.336110 MHz Flip = 1 Band = 0 Mixer = 1978.000000 MHz 2008-Jul-25 02:51:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.336110 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2008-Jul-25 02:51:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 02:51:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2008-Jul-25 02:51:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 02:51:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 02:51:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2008-Jul-25 02:51:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2008-Jul-25 02:51:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 02:51:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 02:51:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2008-Jul-25 02:51:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 02:51:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 02:51:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 02:51:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.078 (still bad) 2008-Jul-25 02:51:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2008-Jul-25 02:51:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 02:51:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 02:51:34 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 1.078 0.965 2008-Jul-25 02:51:34 LOG4 check_wapp_levels: WAPP-2 power levels: 0.068 0.014 0.014 0.039 2008-Jul-25 02:51:34 LOG4 check_wapp_levels: WAPP-3 power levels: 0.104 0.014 0.026 0.014 2008-Jul-25 02:51:34 LOG4 check_wapp_levels: WAPP-4 power levels: 0.943 0.911 1.037 1.013 2008-Jul-25 02:51:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 02:51:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 02:51:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.078 (still bad) 2008-Jul-25 02:51:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2008-Jul-25 02:51:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2008-Jul-25 02:51:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 02:51:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2008-Jul-25 02:51:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.079 (still bad) 2008-Jul-25 02:51:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2008-Jul-25 02:51:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2008-Jul-25 02:51:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 02:51:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2008-Jul-25 02:52:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 02:52:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2008-Jul-25 02:52:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 02:52:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 02:52:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 02:52:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2008-Jul-25 02:52:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.078 (still bad) 2008-Jul-25 02:52:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.079 (still bad) 2008-Jul-25 02:52:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.078 (still bad) 2008-Jul-25 02:52:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2008-Jul-25 02:52:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.078 (still bad) 2008-Jul-25 02:52:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 02:52:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2008-Jul-25 02:52:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.080 (still bad) 2008-Jul-25 02:52:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2008-Jul-25 02:52:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 02:52:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.078 (still bad) 2008-Jul-25 02:52:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 02:52:35 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 1.077 0.967 2008-Jul-25 02:52:35 LOG4 check_wapp_levels: WAPP-2 power levels: 0.068 0.014 0.014 0.038 2008-Jul-25 02:52:35 LOG4 check_wapp_levels: WAPP-3 power levels: 0.104 0.014 0.026 0.014 2008-Jul-25 02:52:35 LOG4 check_wapp_levels: WAPP-4 power levels: 0.942 0.912 1.033 1.013 2008-Jul-25 02:52:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.078 (still bad) 2008-Jul-25 02:52:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.080 (still bad) 2008-Jul-25 02:52:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.078 (still bad) 2008-Jul-25 02:52:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2008-Jul-25 02:52:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.079 (still bad) 2008-Jul-25 02:52:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2008-Jul-25 02:52:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2008-Jul-25 02:52:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.079 (still bad) 2008-Jul-25 02:52:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 02:52:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 02:52:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.078 (still bad) 2008-Jul-25 02:52:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2008-Jul-25 02:53:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2008-Jul-25 02:53:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.079 (still bad) 2008-Jul-25 02:53:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 02:53:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2008-Jul-25 02:53:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.078 (still bad) 2008-Jul-25 02:53:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 02:53:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2008-Jul-25 02:53:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.079 (still bad) 2008-Jul-25 02:53:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 02:53:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 02:53:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2008-Jul-25 02:53:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 02:53:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2008-Jul-25 02:53:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2008-Jul-25 02:53:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2008-Jul-25 02:53:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.078 (still bad) 2008-Jul-25 02:53:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 02:53:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 02:53:36 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 1.076 0.967 2008-Jul-25 02:53:36 LOG4 check_wapp_levels: WAPP-2 power levels: 0.068 0.014 0.014 0.038 2008-Jul-25 02:53:36 LOG4 check_wapp_levels: WAPP-3 power levels: 0.104 0.014 0.026 0.014 2008-Jul-25 02:53:36 LOG4 check_wapp_levels: WAPP-4 power levels: 0.946 0.914 1.038 1.014 2008-Jul-25 02:53:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2008-Jul-25 02:53:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.079 (still bad) 2008-Jul-25 02:53:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.079 (still bad) 2008-Jul-25 02:53:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.080 (still bad) 2008-Jul-25 02:53:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.079 (still bad) 2008-Jul-25 02:53:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.080 (still bad) 2008-Jul-25 02:53:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2008-Jul-25 02:53:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2008-Jul-25 02:53:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2008-Jul-25 02:53:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2008-Jul-25 02:53:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2008-Jul-25 02:54:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2008-Jul-25 02:54:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2008-Jul-25 02:54:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2008-Jul-25 02:54:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2008-Jul-25 02:54:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2008-Jul-25 02:54:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.079 (still bad) 2008-Jul-25 02:54:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.080 (still bad) 2008-Jul-25 02:54:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2008-Jul-25 02:54:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.079 (still bad) 2008-Jul-25 02:54:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.079 (still bad) 2008-Jul-25 02:54:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.080 (still bad) 2008-Jul-25 02:54:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.078 (still bad) 2008-Jul-25 02:54:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.078 (still bad) 2008-Jul-25 02:54:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2008-Jul-25 02:54:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.080 (still bad) 2008-Jul-25 02:54:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2008-Jul-25 02:54:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.078 (still bad) 2008-Jul-25 02:54:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.079 (still bad) 2008-Jul-25 02:54:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 02:54:37 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 1.079 0.969 2008-Jul-25 02:54:37 LOG4 check_wapp_levels: WAPP-2 power levels: 0.068 0.014 0.014 0.037 2008-Jul-25 02:54:37 LOG4 check_wapp_levels: WAPP-3 power levels: 0.105 0.014 0.026 0.014 2008-Jul-25 02:54:37 LOG4 check_wapp_levels: WAPP-4 power levels: 0.947 0.914 1.037 1.017 2008-Jul-25 02:54:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2008-Jul-25 02:54:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.079 (still bad) 2008-Jul-25 02:54:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.078 (still bad) 2008-Jul-25 02:54:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.078 (still bad) 2008-Jul-25 02:54:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2008-Jul-25 02:54:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2008-Jul-25 02:54:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.078 (still bad) 2008-Jul-25 02:54:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2008-Jul-25 02:54:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2008-Jul-25 02:54:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.079 (still bad) 2008-Jul-25 02:54:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2008-Jul-25 02:55:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 02:55:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.079 (still bad) 2008-Jul-25 02:55:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 02:55:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 02:55:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.079 (still bad) 2008-Jul-25 02:55:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2008-Jul-25 02:55:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.079 (still bad) 2008-Jul-25 02:55:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2008-Jul-25 02:55:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.079 (still bad) 2008-Jul-25 02:55:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.079 (still bad) 2008-Jul-25 02:55:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2008-Jul-25 02:55:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.080 (still bad) 2008-Jul-25 02:55:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2008-Jul-25 02:55:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2008-Jul-25 02:55:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.080 (still bad) 2008-Jul-25 02:55:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.079 (still bad) 2008-Jul-25 02:55:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2008-Jul-25 02:55:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.078 (still bad) 2008-Jul-25 02:55:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.080 (still bad) 2008-Jul-25 02:55:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 02:55:39 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 1.085 0.976 2008-Jul-25 02:55:39 LOG4 check_wapp_levels: WAPP-2 power levels: 0.069 0.014 0.014 0.042 2008-Jul-25 02:55:39 LOG4 check_wapp_levels: WAPP-3 power levels: 0.104 0.014 0.026 0.014 2008-Jul-25 02:55:39 LOG4 check_wapp_levels: WAPP-4 power levels: 0.948 0.916 1.040 1.019 2008-Jul-25 02:55:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.079 (still bad) 2008-Jul-25 02:55:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.079 (still bad) 2008-Jul-25 02:55:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2008-Jul-25 02:55:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.079 (still bad) 2008-Jul-25 02:55:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2008-Jul-25 02:55:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2008-Jul-25 02:55:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2008-Jul-25 02:55:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2008-Jul-25 02:55:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2008-Jul-25 02:56:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2008-Jul-25 02:56:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2008-Jul-25 02:56:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2008-Jul-25 02:56:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2008-Jul-25 02:56:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.079 (still bad) 2008-Jul-25 02:56:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2008-Jul-25 02:56:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.079 (still bad) 2008-Jul-25 02:56:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.080 (still bad) 2008-Jul-25 02:56:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.086 (still bad) 2008-Jul-25 02:56:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.078 (still bad) 2008-Jul-25 02:56:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.078 (still bad) 2008-Jul-25 02:56:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2008-Jul-25 02:56:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.078 (still bad) 2008-Jul-25 02:56:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.080 (still bad) 2008-Jul-25 02:56:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2008-Jul-25 02:56:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.080 (still bad) 2008-Jul-25 02:56:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.079 (still bad) 2008-Jul-25 02:56:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2008-Jul-25 02:56:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.078 (still bad) 2008-Jul-25 02:56:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.079 (still bad) 2008-Jul-25 02:56:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 02:56:40 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 1.086 0.973 2008-Jul-25 02:56:40 LOG4 check_wapp_levels: WAPP-2 power levels: 0.070 0.014 0.014 0.043 2008-Jul-25 02:56:40 LOG4 check_wapp_levels: WAPP-3 power levels: 0.104 0.014 0.026 0.014 2008-Jul-25 02:56:40 LOG4 check_wapp_levels: WAPP-4 power levels: 0.944 0.912 1.036 1.015 2008-Jul-25 02:56:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.080 (still bad) 2008-Jul-25 02:56:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.080 (still bad) 2008-Jul-25 02:56:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.079 (still bad) 2008-Jul-25 02:56:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.079 (still bad) 2008-Jul-25 02:56:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2008-Jul-25 02:56:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2008-Jul-25 02:56:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.080 (still bad) 2008-Jul-25 02:56:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.079 (still bad) 2008-Jul-25 02:56:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.080 (still bad) 2008-Jul-25 02:57:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.080 (still bad) 2008-Jul-25 02:57:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2008-Jul-25 02:57:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2008-Jul-25 02:57:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.080 (still bad) 2008-Jul-25 02:57:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2008-Jul-25 02:57:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2008-Jul-25 02:57:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2008-Jul-25 02:57:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2008-Jul-25 02:57:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2008-Jul-25 02:57:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2008-Jul-25 02:57:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2008-Jul-25 02:57:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2008-Jul-25 02:57:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2008-Jul-25 02:57:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2008-Jul-25 02:57:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2008-Jul-25 02:57:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2008-Jul-25 02:57:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2008-Jul-25 02:57:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2008-Jul-25 02:57:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.086 (still bad) 2008-Jul-25 02:57:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2008-Jul-25 02:57:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 02:57:41 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 1.085 0.971 2008-Jul-25 02:57:41 LOG4 check_wapp_levels: WAPP-2 power levels: 0.069 0.014 0.014 0.040 2008-Jul-25 02:57:41 LOG4 check_wapp_levels: WAPP-3 power levels: 0.104 0.014 0.026 0.014 2008-Jul-25 02:57:41 LOG4 check_wapp_levels: WAPP-4 power levels: 0.943 0.912 1.035 1.013 2008-Jul-25 02:57:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2008-Jul-25 02:57:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2008-Jul-25 02:57:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2008-Jul-25 02:57:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2008-Jul-25 02:57:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2008-Jul-25 02:57:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2008-Jul-25 02:57:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2008-Jul-25 02:57:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2008-Jul-25 02:57:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2008-Jul-25 02:58:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2008-Jul-25 02:58:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.086 (still bad) 2008-Jul-25 02:58:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2008-Jul-25 02:58:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2008-Jul-25 02:58:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.086 (still bad) 2008-Jul-25 02:58:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2008-Jul-25 02:58:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2008-Jul-25 02:58:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2008-Jul-25 02:58:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.086 (still bad) 2008-Jul-25 02:58:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2008-Jul-25 02:58:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2008-Jul-25 02:58:23 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 02:58:23.302 (seconds: 10703.302)!} 2008-Jul-25 02:58:23 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 02:58:23.302 (seconds: 10703.302)! 2008-Jul-25 02:58:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2008-Jul-25 02:58:24 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 10702.0 to 10703.0! 2008-Jul-25 02:58:25 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (10702.0 - 10704.0)! 2008-Jul-25 02:58:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2008-Jul-25 02:58:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2008-Jul-25 02:58:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2008-Jul-25 02:58:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2008-Jul-25 02:58:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-25 02:58:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2008-Jul-25 02:58:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2008-Jul-25 02:58:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2008-Jul-25 02:58:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2008-Jul-25 02:58:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 02:58:43 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 1.118 0.998 2008-Jul-25 02:58:43 LOG4 check_wapp_levels: WAPP-2 power levels: 0.069 0.014 0.014 0.037 2008-Jul-25 02:58:43 LOG4 check_wapp_levels: WAPP-3 power levels: 0.104 0.014 0.026 0.014 2008-Jul-25 02:58:43 LOG4 check_wapp_levels: WAPP-4 power levels: 0.945 0.912 1.036 1.013 2008-Jul-25 02:58:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2008-Jul-25 02:58:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2008-Jul-25 02:58:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2008-Jul-25 02:58:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2008-Jul-25 02:58:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2008-Jul-25 02:58:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2008-Jul-25 02:58:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2008-Jul-25 02:59:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2008-Jul-25 02:59:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2008-Jul-25 02:59:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2008-Jul-25 02:59:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2008-Jul-25 02:59:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2008-Jul-25 02:59:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.086 (still bad) 2008-Jul-25 02:59:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2008-Jul-25 02:59:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2008-Jul-25 02:59:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2008-Jul-25 02:59:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2008-Jul-25 02:59:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2008-Jul-25 02:59:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2008-Jul-25 02:59:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2008-Jul-25 02:59:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2008-Jul-25 02:59:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2008-Jul-25 02:59:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2008-Jul-25 02:59:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2008-Jul-25 02:59:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2008-Jul-25 02:59:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2008-Jul-25 02:59:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2008-Jul-25 02:59:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2008-Jul-25 02:59:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2008-Jul-25 02:59:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 02:59:44 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 1.083 0.969 2008-Jul-25 02:59:44 LOG4 check_wapp_levels: WAPP-2 power levels: 0.069 0.014 0.014 0.037 2008-Jul-25 02:59:44 LOG4 check_wapp_levels: WAPP-3 power levels: 0.104 0.014 0.026 0.014 2008-Jul-25 02:59:44 LOG4 check_wapp_levels: WAPP-4 power levels: 0.942 0.911 1.035 1.015 2008-Jul-25 02:59:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2008-Jul-25 02:59:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2008-Jul-25 02:59:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2008-Jul-25 02:59:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.086 (still bad) 2008-Jul-25 02:59:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2008-Jul-25 02:59:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2008-Jul-25 02:59:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2008-Jul-25 03:00:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2008-Jul-25 03:00:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2008-Jul-25 03:00:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2008-Jul-25 03:00:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2008-Jul-25 03:00:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2008-Jul-25 03:00:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2008-Jul-25 03:00:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2008-Jul-25 03:00:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2008-Jul-25 03:00:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2008-Jul-25 03:00:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2008-Jul-25 03:00:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2008-Jul-25 03:00:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2008-Jul-25 03:00:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2008-Jul-25 03:00:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2008-Jul-25 03:00:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2008-Jul-25 03:00:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2008-Jul-25 03:00:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2008-Jul-25 03:00:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2008-Jul-25 03:00:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2008-Jul-25 03:00:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2008-Jul-25 03:00:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2008-Jul-25 03:00:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2008-Jul-25 03:00:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 03:00:45 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 1.092 0.974 2008-Jul-25 03:00:45 LOG4 check_wapp_levels: WAPP-2 power levels: 0.069 0.014 0.014 0.041 2008-Jul-25 03:00:45 LOG4 check_wapp_levels: WAPP-3 power levels: 0.104 0.014 0.026 0.014 2008-Jul-25 03:00:45 LOG4 check_wapp_levels: WAPP-4 power levels: 0.944 0.909 1.035 1.010 2008-Jul-25 03:00:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2008-Jul-25 03:00:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2008-Jul-25 03:00:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2008-Jul-25 03:00:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2008-Jul-25 03:00:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.086 (still bad) 2008-Jul-25 03:00:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2008-Jul-25 03:00:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2008-Jul-25 03:01:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.086 (still bad) 2008-Jul-25 03:01:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2008-Jul-25 03:01:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2008-Jul-25 03:01:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.086 (still bad) 2008-Jul-25 03:01:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2008-Jul-25 03:01:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2008-Jul-25 03:01:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2008-Jul-25 03:01:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2008-Jul-25 03:01:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2008-Jul-25 03:01:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2008-Jul-25 03:01:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2008-Jul-25 03:01:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.086 (still bad) 2008-Jul-25 03:01:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2008-Jul-25 03:01:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2008-Jul-25 03:01:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2008-Jul-25 03:01:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.086 (still bad) 2008-Jul-25 03:01:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2008-Jul-25 03:01:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2008-Jul-25 03:01:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2008-Jul-25 03:01:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2008-Jul-25 03:01:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2008-Jul-25 03:01:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2008-Jul-25 03:01:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 03:01:46 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 1.088 0.971 2008-Jul-25 03:01:46 LOG4 check_wapp_levels: WAPP-2 power levels: 0.069 0.014 0.014 0.041 2008-Jul-25 03:01:46 LOG4 check_wapp_levels: WAPP-3 power levels: 0.104 0.014 0.026 0.014 2008-Jul-25 03:01:46 LOG4 check_wapp_levels: WAPP-4 power levels: 0.943 0.910 1.036 1.011 2008-Jul-25 03:01:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2008-Jul-25 03:01:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2008-Jul-25 03:01:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2008-Jul-25 03:01:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2008-Jul-25 03:01:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.086 (still bad) 2008-Jul-25 03:01:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2008-Jul-25 03:02:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2008-Jul-25 03:02:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2008-Jul-25 03:02:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2008-Jul-25 03:02:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2008-Jul-25 03:02:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.086 (still bad) 2008-Jul-25 03:02:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2008-Jul-25 03:02:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2008-Jul-25 03:02:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2008-Jul-25 03:02:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2008-Jul-25 03:02:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2008-Jul-25 03:02:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2008-Jul-25 03:02:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2008-Jul-25 03:02:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2008-Jul-25 03:02:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2008-Jul-25 03:02:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2008-Jul-25 03:02:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2008-Jul-25 03:02:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2008-Jul-25 03:02:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2008-Jul-25 03:02:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2008-Jul-25 03:02:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2008-Jul-25 03:02:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2008-Jul-25 03:02:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2008-Jul-25 03:02:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2008-Jul-25 03:02:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2008-Jul-25 03:02:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 03:02:48 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 1.088 0.968 2008-Jul-25 03:02:48 LOG4 check_wapp_levels: WAPP-2 power levels: 0.069 0.014 0.014 0.037 2008-Jul-25 03:02:48 LOG4 check_wapp_levels: WAPP-3 power levels: 0.104 0.014 0.026 0.014 2008-Jul-25 03:02:48 LOG4 check_wapp_levels: WAPP-4 power levels: 0.945 0.910 1.037 1.012 2008-Jul-25 03:02:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2008-Jul-25 03:02:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2008-Jul-25 03:02:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2008-Jul-25 03:02:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2008-Jul-25 03:02:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2008-Jul-25 03:03:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2008-Jul-25 03:03:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2008-Jul-25 03:03:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2008-Jul-25 03:03:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2008-Jul-25 03:03:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2008-Jul-25 03:03:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2008-Jul-25 03:03:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.086 (still bad) 2008-Jul-25 03:03:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2008-Jul-25 03:03:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2008-Jul-25 03:03:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2008-Jul-25 03:03:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2008-Jul-25 03:03:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2008-Jul-25 03:03:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2008-Jul-25 03:03:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2008-Jul-25 03:03:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2008-Jul-25 03:03:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2008-Jul-25 03:03:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2008-Jul-25 03:03:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2008-Jul-25 03:03:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2008-Jul-25 03:03:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2008-Jul-25 03:03:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2008-Jul-25 03:03:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2008-Jul-25 03:03:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2008-Jul-25 03:03:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2008-Jul-25 03:03:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 03:03:49 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 1.089 0.971 2008-Jul-25 03:03:49 LOG4 check_wapp_levels: WAPP-2 power levels: 0.069 0.014 0.014 0.039 2008-Jul-25 03:03:49 LOG4 check_wapp_levels: WAPP-3 power levels: 0.104 0.014 0.026 0.014 2008-Jul-25 03:03:49 LOG4 check_wapp_levels: WAPP-4 power levels: 0.947 0.911 1.038 1.012 2008-Jul-25 03:03:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2008-Jul-25 03:03:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2008-Jul-25 03:03:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2008-Jul-25 03:03:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2008-Jul-25 03:03:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2008-Jul-25 03:04:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2008-Jul-25 03:04:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2008-Jul-25 03:04:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2008-Jul-25 03:04:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2008-Jul-25 03:04:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2008-Jul-25 03:04:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2008-Jul-25 03:04:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2008-Jul-25 03:04:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2008-Jul-25 03:04:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2008-Jul-25 03:04:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2008-Jul-25 03:04:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2008-Jul-25 03:04:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2008-Jul-25 03:04:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2008-Jul-25 03:04:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2008-Jul-25 03:04:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2008-Jul-25 03:04:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2008-Jul-25 03:04:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2008-Jul-25 03:04:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2008-Jul-25 03:04:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2008-Jul-25 03:04:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2008-Jul-25 03:04:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2008-Jul-25 03:04:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2008-Jul-25 03:04:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2008-Jul-25 03:04:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2008-Jul-25 03:04:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 03:04:50 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 1.093 0.972 2008-Jul-25 03:04:50 LOG4 check_wapp_levels: WAPP-2 power levels: 0.069 0.014 0.014 0.038 2008-Jul-25 03:04:50 LOG4 check_wapp_levels: WAPP-3 power levels: 0.104 0.014 0.026 0.014 2008-Jul-25 03:04:50 LOG4 check_wapp_levels: WAPP-4 power levels: 0.947 0.908 1.037 1.010 2008-Jul-25 03:04:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2008-Jul-25 03:04:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2008-Jul-25 03:04:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2008-Jul-25 03:04:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2008-Jul-25 03:05:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2008-Jul-25 03:05:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2008-Jul-25 03:05:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2008-Jul-25 03:05:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2008-Jul-25 03:05:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2008-Jul-25 03:05:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2008-Jul-25 03:05:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2008-Jul-25 03:05:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2008-Jul-25 03:05:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2008-Jul-25 03:05:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2008-Jul-25 03:05:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2008-Jul-25 03:05:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2008-Jul-25 03:05:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2008-Jul-25 03:05:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2008-Jul-25 03:05:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2008-Jul-25 03:05:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2008-Jul-25 03:05:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2008-Jul-25 03:05:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2008-Jul-25 03:05:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2008-Jul-25 03:05:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2008-Jul-25 03:05:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2008-Jul-25 03:05:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2008-Jul-25 03:05:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2008-Jul-25 03:05:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2008-Jul-25 03:05:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2008-Jul-25 03:05:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2008-Jul-25 03:05:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 03:05:52 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 1.096 0.979 2008-Jul-25 03:05:52 LOG4 check_wapp_levels: WAPP-2 power levels: 0.070 0.014 0.014 0.043 2008-Jul-25 03:05:52 LOG4 check_wapp_levels: WAPP-3 power levels: 0.105 0.014 0.026 0.014 2008-Jul-25 03:05:52 LOG4 check_wapp_levels: WAPP-4 power levels: 0.952 0.915 1.043 1.016 2008-Jul-25 03:05:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2008-Jul-25 03:05:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2008-Jul-25 03:05:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2008-Jul-25 03:06:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2008-Jul-25 03:06:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2008-Jul-25 03:06:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2008-Jul-25 03:06:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2008-Jul-25 03:06:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2008-Jul-25 03:06:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2008-Jul-25 03:06:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2008-Jul-25 03:06:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2008-Jul-25 03:06:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2008-Jul-25 03:06:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2008-Jul-25 03:06:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2008-Jul-25 03:06:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2008-Jul-25 03:06:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2008-Jul-25 03:06:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2008-Jul-25 03:06:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2008-Jul-25 03:06:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2008-Jul-25 03:06:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2008-Jul-25 03:06:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2008-Jul-25 03:06:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2008-Jul-25 03:06:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2008-Jul-25 03:06:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2008-Jul-25 03:06:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2008-Jul-25 03:06:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2008-Jul-25 03:06:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2008-Jul-25 03:06:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2008-Jul-25 03:06:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2008-Jul-25 03:06:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 03:06:53 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 1.094 0.976 2008-Jul-25 03:06:53 LOG4 check_wapp_levels: WAPP-2 power levels: 0.069 0.014 0.014 0.041 2008-Jul-25 03:06:53 LOG4 check_wapp_levels: WAPP-3 power levels: 0.104 0.014 0.026 0.014 2008-Jul-25 03:06:53 LOG4 check_wapp_levels: WAPP-4 power levels: 0.951 0.913 1.042 1.014 2008-Jul-25 03:06:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2008-Jul-25 03:06:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2008-Jul-25 03:06:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2008-Jul-25 03:07:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2008-Jul-25 03:07:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2008-Jul-25 03:07:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2008-Jul-25 03:07:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2008-Jul-25 03:07:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2008-Jul-25 03:07:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2008-Jul-25 03:07:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2008-Jul-25 03:07:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2008-Jul-25 03:07:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2008-Jul-25 03:07:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2008-Jul-25 03:07:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2008-Jul-25 03:07:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-25 03:07:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2008-Jul-25 03:07:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2008-Jul-25 03:07:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2008-Jul-25 03:07:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2008-Jul-25 03:07:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2008-Jul-25 03:07:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2008-Jul-25 03:07:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2008-Jul-25 03:07:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2008-Jul-25 03:07:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2008-Jul-25 03:07:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2008-Jul-25 03:07:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2008-Jul-25 03:07:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2008-Jul-25 03:07:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2008-Jul-25 03:07:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2008-Jul-25 03:07:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 03:07:54 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 1.100 0.977 2008-Jul-25 03:07:54 LOG4 check_wapp_levels: WAPP-2 power levels: 0.069 0.014 0.014 0.041 2008-Jul-25 03:07:54 LOG4 check_wapp_levels: WAPP-3 power levels: 0.104 0.014 0.026 0.014 2008-Jul-25 03:07:54 LOG4 check_wapp_levels: WAPP-4 power levels: 0.947 0.909 1.039 1.011 2008-Jul-25 03:07:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2008-Jul-25 03:07:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2008-Jul-25 03:08:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2008-Jul-25 03:08:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2008-Jul-25 03:08:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2008-Jul-25 03:08:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2008-Jul-25 03:08:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2008-Jul-25 03:08:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2008-Jul-25 03:08:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2008-Jul-25 03:08:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2008-Jul-25 03:08:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2008-Jul-25 03:08:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2008-Jul-25 03:08:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2008-Jul-25 03:08:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2008-Jul-25 03:08:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2008-Jul-25 03:08:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2008-Jul-25 03:08:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2008-Jul-25 03:08:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2008-Jul-25 03:08:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2008-Jul-25 03:08:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2008-Jul-25 03:08:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2008-Jul-25 03:08:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2008-Jul-25 03:08:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2008-Jul-25 03:08:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2008-Jul-25 03:08:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2008-Jul-25 03:08:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2008-Jul-25 03:08:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2008-Jul-25 03:08:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2008-Jul-25 03:08:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2008-Jul-25 03:08:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 03:08:55 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 1.095 0.975 2008-Jul-25 03:08:55 LOG4 check_wapp_levels: WAPP-2 power levels: 0.069 0.014 0.014 0.040 2008-Jul-25 03:08:55 LOG4 check_wapp_levels: WAPP-3 power levels: 0.105 0.014 0.026 0.014 2008-Jul-25 03:08:55 LOG4 check_wapp_levels: WAPP-4 power levels: 0.948 0.909 1.040 1.011 2008-Jul-25 03:08:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2008-Jul-25 03:08:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2008-Jul-25 03:09:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2008-Jul-25 03:09:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2008-Jul-25 03:09:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2008-Jul-25 03:09:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2008-Jul-25 03:09:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2008-Jul-25 03:09:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2008-Jul-25 03:09:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2008-Jul-25 03:09:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2008-Jul-25 03:09:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2008-Jul-25 03:09:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2008-Jul-25 03:09:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2008-Jul-25 03:09:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2008-Jul-25 03:09:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2008-Jul-25 03:09:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2008-Jul-25 03:09:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2008-Jul-25 03:09:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2008-Jul-25 03:09:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2008-Jul-25 03:09:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2008-Jul-25 03:09:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2008-Jul-25 03:09:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2008-Jul-25 03:09:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2008-Jul-25 03:09:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2008-Jul-25 03:09:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2008-Jul-25 03:09:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2008-Jul-25 03:09:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2008-Jul-25 03:09:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2008-Jul-25 03:09:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2008-Jul-25 03:09:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2008-Jul-25 03:09:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 03:09:57 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 1.095 0.976 2008-Jul-25 03:09:57 LOG4 check_wapp_levels: WAPP-2 power levels: 0.069 0.014 0.014 0.037 2008-Jul-25 03:09:57 LOG4 check_wapp_levels: WAPP-3 power levels: 0.105 0.014 0.026 0.014 2008-Jul-25 03:09:57 LOG4 check_wapp_levels: WAPP-4 power levels: 0.950 0.908 1.042 1.011 2008-Jul-25 03:09:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2008-Jul-25 03:10:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2008-Jul-25 03:10:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2008-Jul-25 03:10:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-25 03:10:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2008-Jul-25 03:10:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2008-Jul-25 03:10:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2008-Jul-25 03:10:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2008-Jul-25 03:10:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2008-Jul-25 03:10:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2008-Jul-25 03:10:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2008-Jul-25 03:10:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2008-Jul-25 03:10:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2008-Jul-25 03:10:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2008-Jul-25 03:10:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2008-Jul-25 03:10:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2008-Jul-25 03:10:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2008-Jul-25 03:10:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2008-Jul-25 03:10:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2008-Jul-25 03:10:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2008-Jul-25 03:10:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2008-Jul-25 03:10:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2008-Jul-25 03:10:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2008-Jul-25 03:10:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2008-Jul-25 03:10:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2008-Jul-25 03:10:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2008-Jul-25 03:10:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2008-Jul-25 03:10:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2008-Jul-25 03:10:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2008-Jul-25 03:10:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 03:10:58 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 1.096 0.974 2008-Jul-25 03:10:58 LOG4 check_wapp_levels: WAPP-2 power levels: 0.069 0.014 0.014 0.040 2008-Jul-25 03:10:58 LOG4 check_wapp_levels: WAPP-3 power levels: 0.104 0.014 0.026 0.014 2008-Jul-25 03:10:58 LOG4 check_wapp_levels: WAPP-4 power levels: 0.950 0.908 1.040 1.011 2008-Jul-25 03:11:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2008-Jul-25 03:11:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2008-Jul-25 03:11:03 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jul-25 03:11:03 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jul-25 03:11:03 LOG5 end_task: Level: (4) ID = <10154> Status = 0 0 0 0 ok 2008-Jul-25 03:11:03 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jul-25 03:11:03 LOG5 end_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2008-Jul-25 03:11:03 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Jul-25 03:11:03 LOG5 finish_task: Level: (2) ID = <10121> Status = 0 0 0 0 ok 2008-Jul-25 03:11:03 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Jul-25 03:11:03 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Jul-25 03:11:03 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Jul-25 03:11:03 LOG5 end_task: Level: (2) ID = <10121> Status = 0 0 0 0 ok 2008-Jul-25 03:11:03 COMMAND run_command_line: EXECUTING command 26: 'ENDIF' 2008-Jul-25 03:11:03 COMMAND run_command_line: EXECUTING command 29: 'IF LSTSLEW(AGES7448_p3_094) < 230326 THEN' 2008-Jul-25 03:11:04 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES7448_p3_094) < 230326 2008-Jul-25 03:11:04 INFO5 is_if_valid: Condition parsed as: 23.150033666666666 < 23.057222222222222 2008-Jul-25 03:11:04 INFO1 is_if_valid: Skipping line 'IF LSTSLEW(AGES7448_p3_094) < 230326 THEN' 2008-Jul-25 03:11:04 COMMAND run_command_line: EXECUTING command 30: 'FIXEDDRIFT az=50.04 alfaangle=-25.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p3_094 ra=225000.00 dec=153930.00' 2008-Jul-25 03:11:04 INFO1 run_command_line: Skipping line 'FIXEDDRIFT az=50.04 alfaangle=-25.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p3_094 ra=225000.00 dec=153930.00' in non-true conditional branch 2008-Jul-25 03:11:04 COMMAND run_command_line: EXECUTING command 33: 'ENDIF' 2008-Jul-25 03:11:04 COMMAND run_command_line: EXECUTING command 36: 'IF LSTSLEW(AGES7448_p3_096) < 232626 THEN' 2008-Jul-25 03:11:05 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES7448_p3_096) < 232626 2008-Jul-25 03:11:05 INFO5 is_if_valid: Condition parsed as: 23.150033666666666 < 23.440555555555555 2008-Jul-25 03:11:05 COMMAND run_command_line: EXECUTING command 37: 'FIXEDDRIFT az=73.94 alfaangle=-49.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p3_096 ra=225000.00 dec=153630.00' 2008-Jul-25 03:11:05 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Jul-25 03:11:05 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Jul-25 03:11:05 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 73.94 -49.4 hcorcal 5 tracking no first 1 AGES7448_p3_096 225000.00 153630.00 J 8500.0 Heliocentric velocity(optical)' 2008-Jul-25 03:11:05 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Jul-25 03:11:05 LOG5 begin_task: Level: (2) ID = <10155> Status = 0 0 0 0 ok 2008-Jul-25 03:11:05 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES7448_p3_092' 2008-Jul-25 03:11:05 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Jul-25 03:11:05 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES7448_p3_096} 2008-Jul-25 03:11:05 INFO3 fixed_driftmap: Sending telescope to Az = 73.94 and ZA = 9.02 2008-Jul-25 03:11:05 LOG3 track_source: Calling 'track_source AGES7448_p3_096 73.94 9.0169918423 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Jul-25 03:11:05 START begin_task: Starting task 'sending tracking commands' 2008-Jul-25 03:11:05 LOG5 begin_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2008-Jul-25 03:11:05 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7448_p3_096} INFO {Slewing to source 'AGES7448_p3_096' ...} 2008-Jul-25 03:11:05 INFO1 track_source: Starting to track AGES7448_p3_096 2008-Jul-25 03:11:05 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7448_p3_096" 2008-Jul-25 03:11:05 LOG3 vw_send: To DATATAKING: set ra 73.94 2008-Jul-25 03:11:05 LOG3 vw_send: To DATATAKING: set dec 9.0169918423 2008-Jul-25 03:11:05 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Jul-25 03:11:05 LOG3 vw_send: To DATATAKING: pnt tr 73.94 9.0169918423 -CF 2008-Jul-25 03:11:06 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Jul-25 03:11:06 STOP finish_task: Finishing task 'sending tracking commands' 2008-Jul-25 03:11:06 LOG5 finish_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2008-Jul-25 03:11:06 INFO2 finish_task: DONE finished sending: tracking commands 2008-Jul-25 03:11:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-25 03:11:06 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Jul-25 03:11:06 LOG5 end_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2008-Jul-25 03:11:06 START begin_task: Starting task 'rotate ALFA to -49.4 degrees' 2008-Jul-25 03:11:06 LOG5 begin_task: Level: (3) ID = <10157> Status = 0 0 0 0 ok 2008-Jul-25 03:11:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -49.4 degrees ...} 2008-Jul-25 03:11:06 INFO2 rotate_alfa: ALFA commanded to -49.4 degrees 2008-Jul-25 03:11:06 LOG3 sock_errsend: To ALFAMOTOR: POSITION -49.4 REPLY 2008-Jul-25 03:11:06 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Jul-25 03:11:06 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Jul-25 03:11:06 LOG5 begin_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2008-Jul-25 03:11:06 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7448_p3_096" 2008-Jul-25 03:11:06 LOG4 got_cormsg: From DATATAKING: set ra 73.94 2008-Jul-25 03:11:06 LOG4 got_cormsg: From DATATAKING: set dec 9.0169918423 2008-Jul-25 03:11:06 LOG4 got_cormsg: From DATATAKING: vw% 73.94 2008-Jul-25 03:11:06 LOG4 got_cormsg: From DATATAKING: vw% 9.0169918423 2008-Jul-25 03:11:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 03:11:06 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Jul-25 03:11:06 LOG4 got_cormsg: From DATATAKING: pnt tr 73.94 9.0169918423 -CF 2008-Jul-25 03:11:06 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Jul-25 03:11:06 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Jul-25 03:11:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 03:11:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2008-Jul-25 03:12:10 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Jul-25 03:12:10 INFO3 alfa_motor: ALFA rotator in-position -49.40 degrees 2008-Jul-25 03:12:10 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Jul-25 03:12:10 LOG5 end_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2008-Jul-25 03:12:10 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Jul-25 03:12:10 STOP finish_task: Finishing task 'rotate ALFA to -49.4 degrees' 2008-Jul-25 03:12:10 LOG5 finish_task: Level: (3) ID = <10157> Status = 0 0 0 0 ok 2008-Jul-25 03:12:10 INFO2 finish_task: DONE finished configuration: rotating ALFA to -49.4 degrees 2008-Jul-25 03:12:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-25 03:12:10 STOP end_task: Finishing task 'rotate ALFA to -49.4 degrees' with status 'OK' 2008-Jul-25 03:12:10 LOG5 end_task: Level: (3) ID = <10157> Status = 0 0 0 0 ok 2008-Jul-25 03:12:10 START begin_task: Starting task 'waiting on telescope' 2008-Jul-25 03:12:10 LOG5 begin_task: Level: (3) ID = <10159> Status = 0 0 0 0 ok 2008-Jul-25 03:12:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Jul-25 03:12:10 LOG3 waittrk: Start waittrk 5 2008-Jul-25 03:12:10 START begin_task: Starting task 'waiting on telescope movement' 2008-Jul-25 03:12:10 LOG5 begin_task: Level: (4) ID = <10160> Status = 0 0 0 0 ok 2008-Jul-25 03:12:15 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Jul-25 03:12:15 LOG5 end_task: Level: (4) ID = <10160> Status = 0 0 0 0 ok 2008-Jul-25 03:12:15 START begin_task: Starting task 'waiting on telescope on source' 2008-Jul-25 03:12:15 LOG5 begin_task: Level: (4) ID = <10161> Status = 0 0 0 0 ok 2008-Jul-25 03:20:43 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Jul-25 03:20:43 LOG5 end_task: Level: (4) ID = <10161> Status = 0 0 0 0 ok 2008-Jul-25 03:20:43 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Jul-25 03:20:43 INFO2 waittrk: Now tracking AGES7448_p3_096 2008-Jul-25 03:20:43 LOG4 waittrk: Current telescope position: Az = 433.83 ZA = 9.01 2008-Jul-25 03:20:43 STOP finish_task: Finishing task 'waiting on telescope' 2008-Jul-25 03:20:43 LOG5 finish_task: Level: (3) ID = <10159> Status = 0 0 0 0 ok 2008-Jul-25 03:20:43 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Jul-25 03:20:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-25 03:20:43 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Jul-25 03:20:43 LOG5 end_task: Level: (3) ID = <10159> Status = 0 0 0 0 ok 2008-Jul-25 03:20:43 START begin_task: Starting task 'selecting calibration type' 2008-Jul-25 03:20:43 LOG5 begin_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2008-Jul-25 03:20:43 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Jul-25 03:20:43 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Jul-25 03:20:43 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jul-25 03:20:43 START begin_task: Starting task 'waiting on setcal' 2008-Jul-25 03:20:43 LOG5 begin_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2008-Jul-25 03:20:43 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Jul-25 03:20:43 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jul-25 03:20:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 03:20:44 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jul-25 03:20:44 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Jul-25 03:20:44 LOG5 end_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2008-Jul-25 03:20:44 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Jul-25 03:20:44 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jul-25 03:20:44 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Jul-25 03:20:44 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jul-25 03:20:44 LOG5 begin_task: Level: (4) ID = <10164> Status = 0 0 0 0 ok 2008-Jul-25 03:20:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 03:20:45 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jul-25 03:20:45 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jul-25 03:20:45 LOG5 end_task: Level: (4) ID = <10164> Status = 0 0 0 0 ok 2008-Jul-25 03:20:45 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jul-25 03:20:45 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Jul-25 03:20:45 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jul-25 03:20:45 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Jul-25 03:20:45 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jul-25 03:20:45 LOG5 begin_task: Level: (4) ID = <10165> Status = 0 0 0 0 ok 2008-Jul-25 03:20:45 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jul-25 03:20:45 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jul-25 03:20:45 LOG5 end_task: Level: (4) ID = <10165> Status = 0 0 0 0 ok 2008-Jul-25 03:20:45 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jul-25 03:20:45 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Jul-25 03:20:45 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Jul-25 03:20:45 LOG5 end_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2008-Jul-25 03:20:45 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2008-Jul-25 03:20:45 INFO2 astwait: Waiting for 1090 seconds from 07:20:45 to 07:38:55 UTC ... 2008-Jul-25 03:20:45 LOG4 send_obs_status: To obs_status: <1> TASKTIME 1090 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Jul-25 03:20:45 START begin_task: Starting task 'waiting on waiting for AST time' 2008-Jul-25 03:20:45 LOG5 begin_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2008-Jul-25 03:28:21 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 03:28:21.303 (seconds: 12501.303)!} 2008-Jul-25 03:28:21 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 03:28:21.303 (seconds: 12501.303)! 2008-Jul-25 03:38:55 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2008-Jul-25 03:38:55 LOG5 end_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2008-Jul-25 03:38:55 INFO3 astwait: Finished waiting 2008-Jul-25 03:38:55 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Jul-25 03:38:55 LOG5 dopset_later: Calling 'dopset_later 60.828836738483865' 2008-Jul-25 03:38:55 INFO3 dopset_later: Setting Doppler correction for 03:39:55 (60.8 seconds from now) 2008-Jul-25 03:38:55 LOG5 antvel: Calling 'antvel 73.940000 9.016992 F 60.828836738483865' 2008-Jul-25 03:38:55 LOG2 antvel: Transforming current Az = 73.94 ZA = 9.02 to apparent RA = 22:50:26.8 Dec = +15:39:17.2 2008-Jul-25 03:38:55 LOG2 antvel: Parameters to Doppler: Heliocentric 27595 2008 207 0.0 2008-Jul-25 03:38:55 INFO5 antvel: Computed antenna velocity: -20.01182 km/s 2008-Jul-25 03:38:55 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-20.011820996600001 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Jul-25 03:38:55 INFO4 dopset_gen: New sky frequencies: 1381.335636 1381.335636 1381.335636 1381.335636 1381.335636 1381.335636 1381.335636 1381.335636 1381.335636 2008-Jul-25 03:38:55 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.335636 sky0=1381.335636 sky1=1381.335636 sky2=1381.335636 sky3=1381.335636 sky4=1381.335636 sky5=1381.335636 sky6=1381.335636 sky7=1381.335636 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jul-25 03:38:55 LOG2 dopset_gen: Result from 'sky2syn': 1631.335636 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jul-25 03:38:55 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631335636.0} 2008-Jul-25 03:38:55 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 03:38:55 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Jul-25 03:38:55 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Jul-25 03:38:55 INFO5 fixed_driftmap: Tracking J2000 position: RA = 22:49:03.6 Dec = +15:36:33.6 2008-Jul-25 03:38:55 LOG3 track_source: Calling 'track_source AGES7448_p3_096 224903.6 153633.6 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Jul-25 03:38:55 START begin_task: Starting task 'sending tracking commands' 2008-Jul-25 03:38:55 LOG5 begin_task: Level: (3) ID = <10167> Status = 0 0 0 0 ok 2008-Jul-25 03:38:55 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7448_p3_096} INFO {Slewing to source 'AGES7448_p3_096' ...} 2008-Jul-25 03:38:55 INFO1 track_source: Starting to track AGES7448_p3_096 2008-Jul-25 03:38:55 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7448_p3_096" 2008-Jul-25 03:38:55 LOG3 vw_send: To DATATAKING: set ra 224903.6 2008-Jul-25 03:38:55 LOG3 vw_send: To DATATAKING: set dec 153633.6 2008-Jul-25 03:38:55 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Jul-25 03:38:55 LOG3 vw_send: To DATATAKING: pnt tr 224903.6 153633.6 -CJ 2008-Jul-25 03:38:55 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Jul-25 03:38:55 STOP finish_task: Finishing task 'sending tracking commands' 2008-Jul-25 03:38:55 LOG5 finish_task: Level: (3) ID = <10167> Status = 0 0 0 0 ok 2008-Jul-25 03:38:55 INFO2 finish_task: DONE finished sending: tracking commands 2008-Jul-25 03:38:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-25 03:38:55 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Jul-25 03:38:55 LOG5 end_task: Level: (3) ID = <10167> Status = 0 0 0 0 ok 2008-Jul-25 03:38:55 START begin_task: Starting task 'waiting on telescope' 2008-Jul-25 03:38:55 LOG5 begin_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2008-Jul-25 03:38:55 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Jul-25 03:38:55 LOG3 waittrk: Start waittrk 5 2008-Jul-25 03:38:55 START begin_task: Starting task 'waiting on telescope movement' 2008-Jul-25 03:38:55 LOG5 begin_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2008-Jul-25 03:38:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631335636.0} 2008-Jul-25 03:38:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 03:38:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 03:38:55 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7448_p3_096" 2008-Jul-25 03:38:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 03:38:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 03:38:55 LOG4 got_cormsg: From DATATAKING: set ra 224903.6 2008-Jul-25 03:38:55 LOG4 got_cormsg: From DATATAKING: set dec 153633.6 2008-Jul-25 03:38:55 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Jul-25 03:38:55 LOG4 got_cormsg: From DATATAKING: pnt tr 224903.6 153633.6 -CJ 2008-Jul-25 03:38:55 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Jul-25 03:38:55 LOG4 got_cormsg: From DATATAKING: 224903.6 2008-Jul-25 03:38:55 LOG4 got_cormsg: From DATATAKING: vw% 153633.6 2008-Jul-25 03:38:55 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2008-Jul-25 03:39:00 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Jul-25 03:39:00 LOG5 end_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2008-Jul-25 03:39:00 START begin_task: Starting task 'waiting on telescope on source' 2008-Jul-25 03:39:00 LOG5 begin_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2008-Jul-25 03:39:02 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Jul-25 03:39:02 LOG5 end_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2008-Jul-25 03:39:02 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Jul-25 03:39:02 INFO2 waittrk: Now tracking AGES7448_p3_096 2008-Jul-25 03:39:02 LOG4 waittrk: Current telescope position: Az = 433.87 ZA = 9.02 2008-Jul-25 03:39:02 STOP finish_task: Finishing task 'waiting on telescope' 2008-Jul-25 03:39:02 LOG5 finish_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2008-Jul-25 03:39:02 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Jul-25 03:39:02 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-25 03:39:02 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Jul-25 03:39:02 LOG5 end_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2008-Jul-25 03:39:02 START begin_task: Starting task 'adjusting WAPP power' 2008-Jul-25 03:39:02 LOG5 begin_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2008-Jul-25 03:39:02 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Jul-25 03:39:02 INFO2 adjust_power: Starting to adjust WAPP power 2008-Jul-25 03:39:02 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Jul-25 03:39:02 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Jul-25 03:39:02 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jul-25 03:39:02 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Jul-25 03:39:02 LOG5 begin_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2008-Jul-25 03:39:02 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Jul-25 03:39:02 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jul-25 03:39:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 03:39:05 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jul-25 03:39:05 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Jul-25 03:39:05 LOG5 end_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2008-Jul-25 03:39:05 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Jul-25 03:39:05 START begin_task: Starting task 'adjusting WAPP power' 2008-Jul-25 03:39:05 LOG5 begin_task: Level: (4) ID = <10173> Status = 0 0 0 0 ok 2008-Jul-25 03:39:05 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Jul-25 03:39:05 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Jul-25 03:39:05 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Jul-25 03:39:05 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Jul-25 03:39:05 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Jul-25 03:39:06 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Jul-25 03:39:06 LOG5 begin_task: Level: (5) ID = <10174> Status = 0 0 0 0 ok 2008-Jul-25 03:39:06 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Jul-25 03:39:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 03:39:06 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 0 0 dB --- beam 1: 6 1 dB 2008-Jul-25 03:39:06 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 0 dB --- beam 5: 0 0 dB 2008-Jul-25 03:39:06 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 0 0 dB --- beam 3: 0 0 dB 2008-Jul-25 03:39:06 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 2 dB --- beam 7: 2 2 dB 2008-Jul-25 03:39:06 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Jul-25 03:39:06 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Jul-25 03:39:06 LOG5 end_task: Level: (5) ID = <10174> Status = 0 0 0 0 ok 2008-Jul-25 03:39:06 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.022 0.018 ALFA beam 1: 0.931 1.045 2008-Jul-25 03:39:06 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.070 0.014 ALFA beam 3: 0.014 0.038 2008-Jul-25 03:39:06 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.107 0.014 ALFA beam 5: 0.026 0.014 2008-Jul-25 03:39:06 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.024 0.928 ALFA beam 7: 0.884 1.031 2008-Jul-25 03:39:06 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Jul-25 03:39:06 LOG5 finish_task: Level: (4) ID = <10173> Status = 0 0 0 0 ok 2008-Jul-25 03:39:06 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Jul-25 03:39:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-25 03:39:06 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Jul-25 03:39:06 LOG5 end_task: Level: (4) ID = <10173> Status = 0 0 0 0 ok 2008-Jul-25 03:39:06 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Jul-25 03:39:06 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Jul-25 03:39:06 LOG5 finish_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2008-Jul-25 03:39:06 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Jul-25 03:39:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-25 03:39:06 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Jul-25 03:39:06 LOG5 end_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2008-Jul-25 03:39:06 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 JID 2008-Jul-25 03:39:06 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 JID 2008-Jul-25 03:39:06 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 JID 2008-Jul-25 03:39:06 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 JID 2008-Jul-25 03:39:06 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Jul-25 03:39:06 START begin_task: Starting task 'WAPP calibration' 2008-Jul-25 03:39:06 LOG5 begin_task: Level: (3) ID = <10175> Status = 0 0 0 0 ok 2008-Jul-25 03:39:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Jul-25 03:39:06 START begin_task: Starting task 'selecting calibration type' 2008-Jul-25 03:39:06 LOG5 begin_task: Level: (4) ID = <10176> Status = 0 0 0 0 ok 2008-Jul-25 03:39:06 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Jul-25 03:39:06 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Jul-25 03:39:06 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jul-25 03:39:06 START begin_task: Starting task 'waiting on setcal' 2008-Jul-25 03:39:06 LOG5 begin_task: Level: (5) ID = <10177> Status = 0 0 0 0 ok 2008-Jul-25 03:39:06 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 JID' 2008-Jul-25 03:39:07 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Jul-25 03:39:07 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jul-25 03:39:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 03:39:07 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jul-25 03:39:07 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Jul-25 03:39:07 LOG5 end_task: Level: (5) ID = <10177> Status = 0 0 0 0 ok 2008-Jul-25 03:39:07 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Jul-25 03:39:07 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jul-25 03:39:07 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Jul-25 03:39:07 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jul-25 03:39:07 LOG5 begin_task: Level: (5) ID = <10178> Status = 0 0 0 0 ok 2008-Jul-25 03:39:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 03:39:07 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jul-25 03:39:07 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jul-25 03:39:07 LOG5 end_task: Level: (5) ID = <10178> Status = 0 0 0 0 ok 2008-Jul-25 03:39:07 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jul-25 03:39:07 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Jul-25 03:39:07 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jul-25 03:39:07 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Jul-25 03:39:07 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jul-25 03:39:07 LOG5 begin_task: Level: (5) ID = <10179> Status = 0 0 0 0 ok 2008-Jul-25 03:39:07 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jul-25 03:39:07 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jul-25 03:39:07 LOG5 end_task: Level: (5) ID = <10179> Status = 0 0 0 0 ok 2008-Jul-25 03:39:07 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jul-25 03:39:07 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Jul-25 03:39:07 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Jul-25 03:39:07 LOG5 end_task: Level: (4) ID = <10176> Status = 0 0 0 0 ok 2008-Jul-25 03:39:07 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Jul-25 03:39:07 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Jul-25 03:39:07 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Jul-25 03:39:07 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jul-25 03:39:07 LOG5 begin_task: Level: (4) ID = <10180> Status = 0 0 0 0 ok 2008-Jul-25 03:39:07 NOTE WAPPDATA-new_file: New FITS file: wapp.20080725.a2048.0003.fits 2008-Jul-25 03:39:07 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jul-25 03:39:07 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080725.a2048.0003.fits} 2008-Jul-25 03:39:07 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Jul-25 03:39:07 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jul-25 03:39:07 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jul-25 03:39:07 LOG5 end_task: Level: (4) ID = <10180> Status = 0 0 0 0 ok 2008-Jul-25 03:39:07 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Jul-25 03:39:07 LOG4 take_data: Calling 'take_data 5 5 CAL ON -' 2008-Jul-25 03:39:07 START begin_task: Starting task 'WAPP spectral observation' 2008-Jul-25 03:39:07 LOG5 begin_task: Level: (4) ID = <10181> Status = 0 0 0 0 ok 2008-Jul-25 03:39:07 LOG5 log_alfabeam: Parameters: 22.817666666666668 15.609333333333334 23.427425 2008.5671517162268 -49.400066 2008-Jul-25 03:39:07 LOG4 log_alfabeam: ALFABEAM 0 22.817666666666675 15.609333333333336 2008-Jul-25 03:39:07 LOG4 log_alfabeam: ALFABEAM 1 22.817001859476246 15.700698848189257 2008-Jul-25 03:39:07 LOG4 log_alfabeam: ALFABEAM 2 22.811039791649101 15.640397073135919 2008-Jul-25 03:39:07 LOG4 log_alfabeam: ALFABEAM 3 22.811749860624015 15.548129722024303 2008-Jul-25 03:39:07 LOG4 log_alfabeam: ALFABEAM 4 22.818397372368135 15.517883541674873 2008-Jul-25 03:39:07 LOG4 log_alfabeam: ALFABEAM 5 22.824293677033001 15.579348563156662 2008-Jul-25 03:39:07 LOG4 log_alfabeam: ALFABEAM 6 22.823608396569622 15.669899319943038 2008-Jul-25 03:39:07 INFO2 take_data: Starting WAPP scan: 820700011 2008-Jul-25 03:39:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Jul-25 03:39:08 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jul-25 03:39:08 LOG5 begin_task: Level: (5) ID = <10182> Status = 0 0 0 0 ok 2008-Jul-25 03:39:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jul-25 03:39:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 03:39:08 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 0.931 1.045 2008-Jul-25 03:39:08 LOG4 check_wapp_levels: WAPP-2 power levels: 0.070 0.014 0.014 0.038 2008-Jul-25 03:39:08 LOG4 check_wapp_levels: WAPP-3 power levels: 0.107 0.014 0.026 0.014 2008-Jul-25 03:39:08 LOG4 check_wapp_levels: WAPP-4 power levels: 1.024 0.928 0.884 1.031 2008-Jul-25 03:39:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 27549.00 2008-Jul-25 03:39:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.335636 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jul-25 03:39:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.335636 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 03:39:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.335636 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 03:39:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.045 (still bad) 2008-Jul-25 03:39:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.335636 MHz Flip = 1 Band = 0 Mixer = 944.589620 MHz 2008-Jul-25 03:39:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.335636 MHz Flip = 1 Band = 0 Mixer = 942.632164 MHz 2008-Jul-25 03:39:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.335636 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Jul-25 03:39:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.335636 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Jul-25 03:39:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.335636 MHz Flip = 1 Band = 0 Mixer = 1978.000000 MHz 2008-Jul-25 03:39:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.335636 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2008-Jul-25 03:39:14 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jul-25 03:39:14 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jul-25 03:39:14 LOG5 end_task: Level: (5) ID = <10182> Status = 0 0 0 0 ok 2008-Jul-25 03:39:14 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jul-25 03:39:14 LOG5 end_task: Level: (4) ID = <10181> Status = 0 0 0 0 ok 2008-Jul-25 03:39:14 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Jul-25 03:39:14 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Jul-25 03:39:14 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Jul-25 03:39:14 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jul-25 03:39:14 LOG5 begin_task: Level: (4) ID = <10183> Status = 0 0 0 0 ok 2008-Jul-25 03:39:15 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jul-25 03:39:15 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jul-25 03:39:15 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jul-25 03:39:15 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jul-25 03:39:15 LOG5 end_task: Level: (4) ID = <10183> Status = 0 0 0 0 ok 2008-Jul-25 03:39:15 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Jul-25 03:39:15 LOG4 take_data: Calling 'take_data 5 5 CAL OFF -' 2008-Jul-25 03:39:15 START begin_task: Starting task 'WAPP spectral observation' 2008-Jul-25 03:39:15 LOG5 begin_task: Level: (4) ID = <10184> Status = 0 0 0 0 ok 2008-Jul-25 03:39:15 LOG5 log_alfabeam: Parameters: 22.817666666666668 15.609333333333334 23.429375 2008.5671519380435 -49.400066 2008-Jul-25 03:39:15 LOG4 log_alfabeam: ALFABEAM 0 22.817666666666664 15.609333333333328 2008-Jul-25 03:39:15 LOG4 log_alfabeam: ALFABEAM 1 22.817007105181457 15.700707065049599 2008-Jul-25 03:39:15 LOG4 log_alfabeam: ALFABEAM 2 22.811041605427221 15.640476254610704 2008-Jul-25 03:39:15 LOG4 log_alfabeam: ALFABEAM 3 22.811746251884077 15.548202849174267 2008-Jul-25 03:39:15 LOG4 log_alfabeam: ALFABEAM 4 22.818391927651703 15.517874773418836 2008-Jul-25 03:39:15 LOG4 log_alfabeam: ALFABEAM 5 22.824291917767457 15.579266021403241 2008-Jul-25 03:39:15 LOG4 log_alfabeam: ALFABEAM 6 22.823611904171525 15.669827688407473 2008-Jul-25 03:39:15 INFO2 take_data: Starting WAPP scan: 820700012 2008-Jul-25 03:39:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Jul-25 03:39:15 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jul-25 03:39:15 LOG5 begin_task: Level: (5) ID = <10185> Status = 0 0 0 0 ok 2008-Jul-25 03:39:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jul-25 03:39:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 27556.00 2008-Jul-25 03:39:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.433 (still bad) 2008-Jul-25 03:39:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.335636 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jul-25 03:39:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.335636 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 03:39:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.335636 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 03:39:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.335636 MHz Flip = 1 Band = 0 Mixer = 944.589620 MHz 2008-Jul-25 03:39:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.335636 MHz Flip = 1 Band = 0 Mixer = 942.632164 MHz 2008-Jul-25 03:39:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.335636 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Jul-25 03:39:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.335636 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Jul-25 03:39:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.335636 MHz Flip = 1 Band = 0 Mixer = 1978.000000 MHz 2008-Jul-25 03:39:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.335636 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2008-Jul-25 03:39:21 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Jul-25 03:39:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jul-25 03:39:21 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jul-25 03:39:21 LOG5 end_task: Level: (5) ID = <10185> Status = 0 0 0 0 ok 2008-Jul-25 03:39:21 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jul-25 03:39:21 LOG5 end_task: Level: (4) ID = <10184> Status = 0 0 0 0 ok 2008-Jul-25 03:39:21 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Jul-25 03:39:21 STOP finish_task: Finishing task 'WAPP calibration' 2008-Jul-25 03:39:21 LOG5 finish_task: Level: (3) ID = <10175> Status = 0 0 0 0 ok 2008-Jul-25 03:39:21 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Jul-25 03:39:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-25 03:39:21 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Jul-25 03:39:21 LOG5 end_task: Level: (3) ID = <10175> Status = 0 0 0 0 ok 2008-Jul-25 03:39:22 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Jul-25 03:39:22 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 73.94 and ZA = 9.02 2008-Jul-25 03:39:22 LOG3 track_source: Calling 'track_source AGES7448_p3_096 73.94 9.0169918423 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Jul-25 03:39:22 START begin_task: Starting task 'sending tracking commands' 2008-Jul-25 03:39:22 LOG5 begin_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2008-Jul-25 03:39:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7448_p3_096} INFO {Slewing to source 'AGES7448_p3_096' ...} 2008-Jul-25 03:39:22 INFO1 track_source: Starting to track AGES7448_p3_096 2008-Jul-25 03:39:22 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7448_p3_096" 2008-Jul-25 03:39:22 LOG3 vw_send: To DATATAKING: set ra 73.94 2008-Jul-25 03:39:22 LOG3 vw_send: To DATATAKING: set dec 9.0169918423 2008-Jul-25 03:39:22 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Jul-25 03:39:22 LOG3 vw_send: To DATATAKING: pnt tr 73.94 9.0169918423 -CF 2008-Jul-25 03:39:22 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Jul-25 03:39:22 STOP finish_task: Finishing task 'sending tracking commands' 2008-Jul-25 03:39:22 LOG5 finish_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2008-Jul-25 03:39:22 INFO2 finish_task: DONE finished sending: tracking commands 2008-Jul-25 03:39:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-25 03:39:22 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Jul-25 03:39:22 LOG5 end_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2008-Jul-25 03:39:22 LOG1 fixed_driftmap: Parameters: HA = +00:35:59.7 Start = 23:26:26.7 LST = 23:25:52.8 diff = 33.9 secs 2008-Jul-25 03:39:22 INFO2 fixed_driftmap: Waiting 31.9 seconds for RA 22:50:27 2008-Jul-25 03:39:22 INFO2 lstwait: Waiting for 31.8 secs from LST 23:25:53 to LST 23:26:25 ... 2008-Jul-25 03:39:22 LOG4 send_obs_status: To obs_status: <1> TASKTIME 31.836214927291628 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Jul-25 03:39:22 START begin_task: Starting task 'waiting on wait on LST' 2008-Jul-25 03:39:22 LOG5 begin_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2008-Jul-25 03:39:22 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7448_p3_096" 2008-Jul-25 03:39:22 LOG4 got_cormsg: From DATATAKING: set ra 73.94 2008-Jul-25 03:39:22 LOG4 got_cormsg: From DATATAKING: set dec 9.0169918423 2008-Jul-25 03:39:22 LOG4 got_cormsg: From DATATAKING: vw% 73.94 2008-Jul-25 03:39:22 LOG4 got_cormsg: From DATATAKING: vw% 9.0169918423 2008-Jul-25 03:39:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 03:39:22 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Jul-25 03:39:22 LOG4 got_cormsg: From DATATAKING: pnt tr 73.94 9.0169918423 -CF 2008-Jul-25 03:39:22 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Jul-25 03:39:22 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Jul-25 03:39:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 03:39:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.043 (still bad) 2008-Jul-25 03:39:54 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Jul-25 03:39:54 LOG5 end_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2008-Jul-25 03:39:54 LOG4 lstwait: Finished waiting 0.16 seconds late 2008-Jul-25 03:39:54 INFO3 lstwait: Finished waiting 2008-Jul-25 03:39:54 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Jul-25 03:39:54 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Jul-25 03:39:54 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Jul-25 03:39:54 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Jul-25 03:39:54 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Jul-25 03:39:54 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ -' 2008-Jul-25 03:39:54 START begin_task: Starting task 'WAPP spectral observation' 2008-Jul-25 03:39:54 LOG5 begin_task: Level: (3) ID = <10188> Status = 0 0 0 0 ok 2008-Jul-25 03:39:54 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jul-25 03:39:54 INFO2 take_data: Starting WAPP scan: 820700013 2008-Jul-25 03:39:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Jul-25 03:39:54 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jul-25 03:39:54 LOG5 begin_task: Level: (4) ID = <10189> Status = 0 0 0 0 ok 2008-Jul-25 03:39:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jul-25 03:39:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 27595.00 2008-Jul-25 03:39:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.335636 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jul-25 03:39:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.335636 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 03:39:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.335636 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 03:39:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.335636 MHz Flip = 1 Band = 0 Mixer = 944.589620 MHz 2008-Jul-25 03:39:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.335636 MHz Flip = 1 Band = 0 Mixer = 942.632164 MHz 2008-Jul-25 03:39:56 LOG3 WAPP=1+2+4-save_rfcalc: Channel 5: Sky freq = 1381.335636 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Jul-25 03:39:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.335636 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Jul-25 03:39:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.335636 MHz Flip = 1 Band = 0 Mixer = 1978.000000 MHz 2008-Jul-25 03:39:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.335636 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2008-Jul-25 03:39:56 LOG3 WAPP=3-save_rfcalc: Channel 5: Sky freq = 1381.335636 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Jul-25 03:39:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.043 (still bad) 2008-Jul-25 03:39:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.043 (still bad) 2008-Jul-25 03:40:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:40:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.043 (still bad) 2008-Jul-25 03:40:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.041 (still bad) 2008-Jul-25 03:40:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.041 (still bad) 2008-Jul-25 03:40:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.046 (still bad) 2008-Jul-25 03:40:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 03:40:11 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 0.931 1.041 2008-Jul-25 03:40:11 LOG4 check_wapp_levels: WAPP-2 power levels: 0.070 0.014 0.014 0.038 2008-Jul-25 03:40:11 LOG4 check_wapp_levels: WAPP-3 power levels: 0.107 0.014 0.026 0.014 2008-Jul-25 03:40:11 LOG4 check_wapp_levels: WAPP-4 power levels: 1.024 0.925 0.894 1.029 2008-Jul-25 03:40:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.042 (still bad) 2008-Jul-25 03:40:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.043 (still bad) 2008-Jul-25 03:40:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.041 (still bad) 2008-Jul-25 03:40:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.043 (still bad) 2008-Jul-25 03:40:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:40:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.039 (still bad) 2008-Jul-25 03:40:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:40:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.041 (still bad) 2008-Jul-25 03:40:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.038 (still bad) 2008-Jul-25 03:40:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.042 (still bad) 2008-Jul-25 03:40:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.041 (still bad) 2008-Jul-25 03:40:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.041 (still bad) 2008-Jul-25 03:40:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.041 (still bad) 2008-Jul-25 03:40:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.042 (still bad) 2008-Jul-25 03:40:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.041 (still bad) 2008-Jul-25 03:40:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.043 (still bad) 2008-Jul-25 03:40:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.043 (still bad) 2008-Jul-25 03:40:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.041 (still bad) 2008-Jul-25 03:40:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.042 (still bad) 2008-Jul-25 03:40:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.043 (still bad) 2008-Jul-25 03:40:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.042 (still bad) 2008-Jul-25 03:40:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.045 (still bad) 2008-Jul-25 03:40:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.044 (still bad) 2008-Jul-25 03:40:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.042 (still bad) 2008-Jul-25 03:41:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.043 (still bad) 2008-Jul-25 03:41:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.045 (still bad) 2008-Jul-25 03:41:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.043 (still bad) 2008-Jul-25 03:41:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.044 (still bad) 2008-Jul-25 03:41:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.043 (still bad) 2008-Jul-25 03:41:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.041 (still bad) 2008-Jul-25 03:41:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 03:41:13 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 0.929 1.043 2008-Jul-25 03:41:13 LOG4 check_wapp_levels: WAPP-2 power levels: 0.070 0.014 0.014 0.038 2008-Jul-25 03:41:13 LOG4 check_wapp_levels: WAPP-3 power levels: 0.107 0.014 0.026 0.014 2008-Jul-25 03:41:13 LOG4 check_wapp_levels: WAPP-4 power levels: 1.023 0.925 0.893 1.029 2008-Jul-25 03:41:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.043 (still bad) 2008-Jul-25 03:41:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.042 (still bad) 2008-Jul-25 03:41:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.043 (still bad) 2008-Jul-25 03:41:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.044 (still bad) 2008-Jul-25 03:41:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.042 (still bad) 2008-Jul-25 03:41:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.042 (still bad) 2008-Jul-25 03:41:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.043 (still bad) 2008-Jul-25 03:41:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.044 (still bad) 2008-Jul-25 03:41:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.044 (still bad) 2008-Jul-25 03:41:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.045 (still bad) 2008-Jul-25 03:41:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.043 (still bad) 2008-Jul-25 03:41:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.044 (still bad) 2008-Jul-25 03:41:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.044 (still bad) 2008-Jul-25 03:41:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.044 (still bad) 2008-Jul-25 03:41:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.046 (still bad) 2008-Jul-25 03:41:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.045 (still bad) 2008-Jul-25 03:41:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.044 (still bad) 2008-Jul-25 03:41:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.045 (still bad) 2008-Jul-25 03:41:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.041 (still bad) 2008-Jul-25 03:41:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.043 (still bad) 2008-Jul-25 03:41:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.047 (still bad) 2008-Jul-25 03:41:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.043 (still bad) 2008-Jul-25 03:42:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.044 (still bad) 2008-Jul-25 03:42:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.045 (still bad) 2008-Jul-25 03:42:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.042 (still bad) 2008-Jul-25 03:42:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.042 (still bad) 2008-Jul-25 03:42:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.047 (still bad) 2008-Jul-25 03:42:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.041 (still bad) 2008-Jul-25 03:42:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.042 (still bad) 2008-Jul-25 03:42:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 03:42:14 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 0.930 1.043 2008-Jul-25 03:42:14 LOG4 check_wapp_levels: WAPP-2 power levels: 0.071 0.014 0.014 0.038 2008-Jul-25 03:42:14 LOG4 check_wapp_levels: WAPP-3 power levels: 0.106 0.014 0.026 0.014 2008-Jul-25 03:42:14 LOG4 check_wapp_levels: WAPP-4 power levels: 1.022 0.926 0.893 1.030 2008-Jul-25 03:42:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.042 (still bad) 2008-Jul-25 03:42:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.042 (still bad) 2008-Jul-25 03:42:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.048 (still bad) 2008-Jul-25 03:42:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.042 (still bad) 2008-Jul-25 03:42:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.044 (still bad) 2008-Jul-25 03:42:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.045 (still bad) 2008-Jul-25 03:42:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.041 (still bad) 2008-Jul-25 03:42:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.042 (still bad) 2008-Jul-25 03:42:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.047 (still bad) 2008-Jul-25 03:42:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.043 (still bad) 2008-Jul-25 03:42:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.043 (still bad) 2008-Jul-25 03:42:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.044 (still bad) 2008-Jul-25 03:42:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.043 (still bad) 2008-Jul-25 03:42:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.043 (still bad) 2008-Jul-25 03:42:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.047 (still bad) 2008-Jul-25 03:42:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.043 (still bad) 2008-Jul-25 03:42:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.042 (still bad) 2008-Jul-25 03:42:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.044 (still bad) 2008-Jul-25 03:42:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.043 (still bad) 2008-Jul-25 03:42:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.044 (still bad) 2008-Jul-25 03:42:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.048 (still bad) 2008-Jul-25 03:42:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.042 (still bad) 2008-Jul-25 03:43:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.043 (still bad) 2008-Jul-25 03:43:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.044 (still bad) 2008-Jul-25 03:43:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.043 (still bad) 2008-Jul-25 03:43:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.045 (still bad) 2008-Jul-25 03:43:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.046 (still bad) 2008-Jul-25 03:43:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.043 (still bad) 2008-Jul-25 03:43:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.043 (still bad) 2008-Jul-25 03:43:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 03:43:15 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 0.931 1.043 2008-Jul-25 03:43:15 LOG4 check_wapp_levels: WAPP-2 power levels: 0.071 0.014 0.014 0.038 2008-Jul-25 03:43:15 LOG4 check_wapp_levels: WAPP-3 power levels: 0.107 0.014 0.026 0.014 2008-Jul-25 03:43:15 LOG4 check_wapp_levels: WAPP-4 power levels: 1.023 0.927 0.893 1.030 2008-Jul-25 03:43:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.043 (still bad) 2008-Jul-25 03:43:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.044 (still bad) 2008-Jul-25 03:43:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.046 (still bad) 2008-Jul-25 03:43:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.042 (still bad) 2008-Jul-25 03:43:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.043 (still bad) 2008-Jul-25 03:43:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.045 (still bad) 2008-Jul-25 03:43:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.042 (still bad) 2008-Jul-25 03:43:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.044 (still bad) 2008-Jul-25 03:43:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.047 (still bad) 2008-Jul-25 03:43:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.043 (still bad) 2008-Jul-25 03:43:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.044 (still bad) 2008-Jul-25 03:43:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.045 (still bad) 2008-Jul-25 03:43:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.044 (still bad) 2008-Jul-25 03:43:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.045 (still bad) 2008-Jul-25 03:43:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.048 (still bad) 2008-Jul-25 03:43:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.043 (still bad) 2008-Jul-25 03:43:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.043 (still bad) 2008-Jul-25 03:43:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.043 (still bad) 2008-Jul-25 03:43:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.041 (still bad) 2008-Jul-25 03:43:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.043 (still bad) 2008-Jul-25 03:43:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.046 (still bad) 2008-Jul-25 03:43:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.042 (still bad) 2008-Jul-25 03:44:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.041 (still bad) 2008-Jul-25 03:44:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.043 (still bad) 2008-Jul-25 03:44:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.043 (still bad) 2008-Jul-25 03:44:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.043 (still bad) 2008-Jul-25 03:44:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.046 (still bad) 2008-Jul-25 03:44:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.042 (still bad) 2008-Jul-25 03:44:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.041 (still bad) 2008-Jul-25 03:44:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.042 (still bad) 2008-Jul-25 03:44:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 03:44:17 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 0.928 1.039 2008-Jul-25 03:44:17 LOG4 check_wapp_levels: WAPP-2 power levels: 0.070 0.014 0.014 0.038 2008-Jul-25 03:44:17 LOG4 check_wapp_levels: WAPP-3 power levels: 0.106 0.014 0.026 0.014 2008-Jul-25 03:44:17 LOG4 check_wapp_levels: WAPP-4 power levels: 1.022 0.925 0.892 1.028 2008-Jul-25 03:44:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.041 (still bad) 2008-Jul-25 03:44:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.045 (still bad) 2008-Jul-25 03:44:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:44:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:44:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.042 (still bad) 2008-Jul-25 03:44:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.042 (still bad) 2008-Jul-25 03:44:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.045 (still bad) 2008-Jul-25 03:44:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.049 (still bad) 2008-Jul-25 03:44:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.044 (still bad) 2008-Jul-25 03:44:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.045 (still bad) 2008-Jul-25 03:44:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.048 (still bad) 2008-Jul-25 03:44:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.045 (still bad) 2008-Jul-25 03:44:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.045 (still bad) 2008-Jul-25 03:44:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.049 (still bad) 2008-Jul-25 03:44:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.044 (still bad) 2008-Jul-25 03:44:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.044 (still bad) 2008-Jul-25 03:44:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.044 (still bad) 2008-Jul-25 03:44:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.043 (still bad) 2008-Jul-25 03:44:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.043 (still bad) 2008-Jul-25 03:44:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.047 (still bad) 2008-Jul-25 03:45:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.041 (still bad) 2008-Jul-25 03:45:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.042 (still bad) 2008-Jul-25 03:45:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.045 (still bad) 2008-Jul-25 03:45:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.043 (still bad) 2008-Jul-25 03:45:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.046 (still bad) 2008-Jul-25 03:45:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.043 (still bad) 2008-Jul-25 03:45:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.041 (still bad) 2008-Jul-25 03:45:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.042 (still bad) 2008-Jul-25 03:45:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.041 (still bad) 2008-Jul-25 03:45:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 03:45:18 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 0.928 1.042 2008-Jul-25 03:45:18 LOG4 check_wapp_levels: WAPP-2 power levels: 0.070 0.014 0.014 0.038 2008-Jul-25 03:45:18 LOG4 check_wapp_levels: WAPP-3 power levels: 0.107 0.014 0.026 0.014 2008-Jul-25 03:45:18 LOG4 check_wapp_levels: WAPP-4 power levels: 1.025 0.923 0.893 1.024 2008-Jul-25 03:45:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.043 (still bad) 2008-Jul-25 03:45:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.041 (still bad) 2008-Jul-25 03:45:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.044 (still bad) 2008-Jul-25 03:45:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.041 (still bad) 2008-Jul-25 03:45:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.042 (still bad) 2008-Jul-25 03:45:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:45:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.043 (still bad) 2008-Jul-25 03:45:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.041 (still bad) 2008-Jul-25 03:45:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:45:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.042 (still bad) 2008-Jul-25 03:45:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.041 (still bad) 2008-Jul-25 03:45:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:45:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.042 (still bad) 2008-Jul-25 03:45:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.041 (still bad) 2008-Jul-25 03:45:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:45:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.041 (still bad) 2008-Jul-25 03:45:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.039 (still bad) 2008-Jul-25 03:45:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:45:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.043 (still bad) 2008-Jul-25 03:45:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.043 (still bad) 2008-Jul-25 03:46:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:46:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.043 (still bad) 2008-Jul-25 03:46:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.041 (still bad) 2008-Jul-25 03:46:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.041 (still bad) 2008-Jul-25 03:46:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.043 (still bad) 2008-Jul-25 03:46:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.044 (still bad) 2008-Jul-25 03:46:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.042 (still bad) 2008-Jul-25 03:46:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.042 (still bad) 2008-Jul-25 03:46:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.042 (still bad) 2008-Jul-25 03:46:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 03:46:19 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 0.930 1.042 2008-Jul-25 03:46:19 LOG4 check_wapp_levels: WAPP-2 power levels: 0.070 0.014 0.014 0.037 2008-Jul-25 03:46:19 LOG4 check_wapp_levels: WAPP-3 power levels: 0.107 0.014 0.026 0.014 2008-Jul-25 03:46:19 LOG4 check_wapp_levels: WAPP-4 power levels: 1.022 0.925 0.892 1.027 2008-Jul-25 03:46:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.042 (still bad) 2008-Jul-25 03:46:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.043 (still bad) 2008-Jul-25 03:46:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.041 (still bad) 2008-Jul-25 03:46:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.041 (still bad) 2008-Jul-25 03:46:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.041 (still bad) 2008-Jul-25 03:46:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:46:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.043 (still bad) 2008-Jul-25 03:46:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.042 (still bad) 2008-Jul-25 03:46:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:46:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.042 (still bad) 2008-Jul-25 03:46:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.041 (still bad) 2008-Jul-25 03:46:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:46:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.042 (still bad) 2008-Jul-25 03:46:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.042 (still bad) 2008-Jul-25 03:46:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.042 (still bad) 2008-Jul-25 03:46:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.044 (still bad) 2008-Jul-25 03:46:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.041 (still bad) 2008-Jul-25 03:46:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.041 (still bad) 2008-Jul-25 03:46:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.047 (still bad) 2008-Jul-25 03:46:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.042 (still bad) 2008-Jul-25 03:47:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.043 (still bad) 2008-Jul-25 03:47:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.043 (still bad) 2008-Jul-25 03:47:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:47:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.041 (still bad) 2008-Jul-25 03:47:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.047 (still bad) 2008-Jul-25 03:47:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.042 (still bad) 2008-Jul-25 03:47:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.044 (still bad) 2008-Jul-25 03:47:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.046 (still bad) 2008-Jul-25 03:47:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.043 (still bad) 2008-Jul-25 03:47:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 03:47:20 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 0.932 1.044 2008-Jul-25 03:47:20 LOG4 check_wapp_levels: WAPP-2 power levels: 0.071 0.014 0.014 0.038 2008-Jul-25 03:47:20 LOG4 check_wapp_levels: WAPP-3 power levels: 0.107 0.014 0.026 0.014 2008-Jul-25 03:47:20 LOG4 check_wapp_levels: WAPP-4 power levels: 1.021 0.925 0.891 1.026 2008-Jul-25 03:47:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.048 (still bad) 2008-Jul-25 03:47:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.043 (still bad) 2008-Jul-25 03:47:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.045 (still bad) 2008-Jul-25 03:47:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.044 (still bad) 2008-Jul-25 03:47:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:47:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.041 (still bad) 2008-Jul-25 03:47:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.048 (still bad) 2008-Jul-25 03:47:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.041 (still bad) 2008-Jul-25 03:47:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.041 (still bad) 2008-Jul-25 03:47:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.042 (still bad) 2008-Jul-25 03:47:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.038 (still bad) 2008-Jul-25 03:47:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:47:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.046 (still bad) 2008-Jul-25 03:47:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:47:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.042 (still bad) 2008-Jul-25 03:47:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.045 (still bad) 2008-Jul-25 03:47:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.042 (still bad) 2008-Jul-25 03:47:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.043 (still bad) 2008-Jul-25 03:47:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.047 (still bad) 2008-Jul-25 03:48:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.043 (still bad) 2008-Jul-25 03:48:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.043 (still bad) 2008-Jul-25 03:48:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.046 (still bad) 2008-Jul-25 03:48:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.043 (still bad) 2008-Jul-25 03:48:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.043 (still bad) 2008-Jul-25 03:48:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.048 (still bad) 2008-Jul-25 03:48:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.043 (still bad) 2008-Jul-25 03:48:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.042 (still bad) 2008-Jul-25 03:48:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.044 (still bad) 2008-Jul-25 03:48:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:48:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:48:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 03:48:22 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 0.932 1.044 2008-Jul-25 03:48:22 LOG4 check_wapp_levels: WAPP-2 power levels: 0.072 0.014 0.014 0.042 2008-Jul-25 03:48:22 LOG4 check_wapp_levels: WAPP-3 power levels: 0.106 0.014 0.026 0.014 2008-Jul-25 03:48:22 LOG4 check_wapp_levels: WAPP-4 power levels: 1.020 0.926 0.890 1.026 2008-Jul-25 03:48:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.041 (still bad) 2008-Jul-25 03:48:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.041 (still bad) 2008-Jul-25 03:48:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.042 (still bad) 2008-Jul-25 03:48:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.041 (still bad) 2008-Jul-25 03:48:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.041 (still bad) 2008-Jul-25 03:48:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.041 (still bad) 2008-Jul-25 03:48:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:48:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.042 (still bad) 2008-Jul-25 03:48:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.041 (still bad) 2008-Jul-25 03:48:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.039 (still bad) 2008-Jul-25 03:48:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.042 (still bad) 2008-Jul-25 03:48:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.041 (still bad) 2008-Jul-25 03:48:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:48:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:48:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.041 (still bad) 2008-Jul-25 03:48:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.038 (still bad) 2008-Jul-25 03:48:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:48:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.039 (still bad) 2008-Jul-25 03:49:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:49:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.037 (still bad) 2008-Jul-25 03:49:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.038 (still bad) 2008-Jul-25 03:49:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.038 (still bad) 2008-Jul-25 03:49:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.042 (still bad) 2008-Jul-25 03:49:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.041 (still bad) 2008-Jul-25 03:49:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:49:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:49:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:49:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.037 (still bad) 2008-Jul-25 03:49:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:49:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 03:49:23 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 0.929 1.039 2008-Jul-25 03:49:23 LOG4 check_wapp_levels: WAPP-2 power levels: 0.071 0.014 0.014 0.038 2008-Jul-25 03:49:23 LOG4 check_wapp_levels: WAPP-3 power levels: 0.107 0.014 0.026 0.014 2008-Jul-25 03:49:23 LOG4 check_wapp_levels: WAPP-4 power levels: 1.024 0.924 0.894 1.026 2008-Jul-25 03:49:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.037 (still bad) 2008-Jul-25 03:49:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.038 (still bad) 2008-Jul-25 03:49:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.039 (still bad) 2008-Jul-25 03:49:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.038 (still bad) 2008-Jul-25 03:49:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.039 (still bad) 2008-Jul-25 03:49:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:49:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.038 (still bad) 2008-Jul-25 03:49:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:49:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.043 (still bad) 2008-Jul-25 03:49:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.043 (still bad) 2008-Jul-25 03:49:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.050 (still bad) 2008-Jul-25 03:49:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.042 (still bad) 2008-Jul-25 03:49:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.039 (still bad) 2008-Jul-25 03:49:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.037 (still bad) 2008-Jul-25 03:49:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.039 (still bad) 2008-Jul-25 03:49:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.036 (still bad) 2008-Jul-25 03:49:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.038 (still bad) 2008-Jul-25 03:49:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.039 (still bad) 2008-Jul-25 03:50:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.039 (still bad) 2008-Jul-25 03:50:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:50:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.041 (still bad) 2008-Jul-25 03:50:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.041 (still bad) 2008-Jul-25 03:50:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.046 (still bad) 2008-Jul-25 03:50:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.041 (still bad) 2008-Jul-25 03:50:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.037 (still bad) 2008-Jul-25 03:50:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.039 (still bad) 2008-Jul-25 03:50:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.037 (still bad) 2008-Jul-25 03:50:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.039 (still bad) 2008-Jul-25 03:50:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.038 (still bad) 2008-Jul-25 03:50:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 03:50:24 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 0.927 1.036 2008-Jul-25 03:50:24 LOG4 check_wapp_levels: WAPP-2 power levels: 0.071 0.014 0.014 0.037 2008-Jul-25 03:50:24 LOG4 check_wapp_levels: WAPP-3 power levels: 0.107 0.014 0.026 0.014 2008-Jul-25 03:50:24 LOG4 check_wapp_levels: WAPP-4 power levels: 1.021 0.923 0.891 1.025 2008-Jul-25 03:50:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.038 (still bad) 2008-Jul-25 03:50:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.037 (still bad) 2008-Jul-25 03:50:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.038 (still bad) 2008-Jul-25 03:50:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.038 (still bad) 2008-Jul-25 03:50:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.039 (still bad) 2008-Jul-25 03:50:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.038 (still bad) 2008-Jul-25 03:50:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.039 (still bad) 2008-Jul-25 03:50:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.039 (still bad) 2008-Jul-25 03:50:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.038 (still bad) 2008-Jul-25 03:50:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.038 (still bad) 2008-Jul-25 03:50:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.038 (still bad) 2008-Jul-25 03:50:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.038 (still bad) 2008-Jul-25 03:50:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.038 (still bad) 2008-Jul-25 03:50:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.039 (still bad) 2008-Jul-25 03:50:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.036 (still bad) 2008-Jul-25 03:50:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.038 (still bad) 2008-Jul-25 03:50:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:51:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.037 (still bad) 2008-Jul-25 03:51:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:51:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:51:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.038 (still bad) 2008-Jul-25 03:51:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.038 (still bad) 2008-Jul-25 03:51:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:51:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.037 (still bad) 2008-Jul-25 03:51:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.037 (still bad) 2008-Jul-25 03:51:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.038 (still bad) 2008-Jul-25 03:51:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.037 (still bad) 2008-Jul-25 03:51:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.038 (still bad) 2008-Jul-25 03:51:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.041 (still bad) 2008-Jul-25 03:51:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.037 (still bad) 2008-Jul-25 03:51:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 03:51:26 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 0.927 1.038 2008-Jul-25 03:51:26 LOG4 check_wapp_levels: WAPP-2 power levels: 0.070 0.014 0.014 0.037 2008-Jul-25 03:51:26 LOG4 check_wapp_levels: WAPP-3 power levels: 0.106 0.014 0.026 0.014 2008-Jul-25 03:51:26 LOG4 check_wapp_levels: WAPP-4 power levels: 1.020 0.920 0.890 1.022 2008-Jul-25 03:51:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.038 (still bad) 2008-Jul-25 03:51:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.038 (still bad) 2008-Jul-25 03:51:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.038 (still bad) 2008-Jul-25 03:51:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:51:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.036 (still bad) 2008-Jul-25 03:51:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.037 (still bad) 2008-Jul-25 03:51:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.038 (still bad) 2008-Jul-25 03:51:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.037 (still bad) 2008-Jul-25 03:51:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.038 (still bad) 2008-Jul-25 03:51:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.036 (still bad) 2008-Jul-25 03:51:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.036 (still bad) 2008-Jul-25 03:51:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.037 (still bad) 2008-Jul-25 03:51:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.035 (still bad) 2008-Jul-25 03:51:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.035 (still bad) 2008-Jul-25 03:51:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.039 (still bad) 2008-Jul-25 03:51:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.038 (still bad) 2008-Jul-25 03:52:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.038 (still bad) 2008-Jul-25 03:52:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:52:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.037 (still bad) 2008-Jul-25 03:52:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.037 (still bad) 2008-Jul-25 03:52:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:52:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.037 (still bad) 2008-Jul-25 03:52:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.037 (still bad) 2008-Jul-25 03:52:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.039 (still bad) 2008-Jul-25 03:52:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.038 (still bad) 2008-Jul-25 03:52:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.038 (still bad) 2008-Jul-25 03:52:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.041 (still bad) 2008-Jul-25 03:52:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.039 (still bad) 2008-Jul-25 03:52:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.037 (still bad) 2008-Jul-25 03:52:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 03:52:27 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 0.929 1.038 2008-Jul-25 03:52:27 LOG4 check_wapp_levels: WAPP-2 power levels: 0.070 0.014 0.014 0.038 2008-Jul-25 03:52:27 LOG4 check_wapp_levels: WAPP-3 power levels: 0.106 0.014 0.026 0.014 2008-Jul-25 03:52:27 LOG4 check_wapp_levels: WAPP-4 power levels: 1.019 0.920 0.890 1.021 2008-Jul-25 03:52:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.038 (still bad) 2008-Jul-25 03:52:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:52:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.042 (still bad) 2008-Jul-25 03:52:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.042 (still bad) 2008-Jul-25 03:52:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.043 (still bad) 2008-Jul-25 03:52:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.046 (still bad) 2008-Jul-25 03:52:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.042 (still bad) 2008-Jul-25 03:52:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.043 (still bad) 2008-Jul-25 03:52:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.046 (still bad) 2008-Jul-25 03:52:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.044 (still bad) 2008-Jul-25 03:52:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.041 (still bad) 2008-Jul-25 03:52:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.042 (still bad) 2008-Jul-25 03:52:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:52:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:52:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.042 (still bad) 2008-Jul-25 03:52:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.041 (still bad) 2008-Jul-25 03:53:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:53:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.041 (still bad) 2008-Jul-25 03:53:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:53:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.038 (still bad) 2008-Jul-25 03:53:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.041 (still bad) 2008-Jul-25 03:53:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:53:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.038 (still bad) 2008-Jul-25 03:53:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.041 (still bad) 2008-Jul-25 03:53:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.038 (still bad) 2008-Jul-25 03:53:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.038 (still bad) 2008-Jul-25 03:53:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.041 (still bad) 2008-Jul-25 03:53:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.039 (still bad) 2008-Jul-25 03:53:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.039 (still bad) 2008-Jul-25 03:53:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 03:53:28 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 0.932 1.041 2008-Jul-25 03:53:28 LOG4 check_wapp_levels: WAPP-2 power levels: 0.071 0.014 0.014 0.038 2008-Jul-25 03:53:28 LOG4 check_wapp_levels: WAPP-3 power levels: 0.106 0.014 0.026 0.014 2008-Jul-25 03:53:28 LOG4 check_wapp_levels: WAPP-4 power levels: 1.021 0.921 0.890 1.022 2008-Jul-25 03:53:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.039 (still bad) 2008-Jul-25 03:53:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:53:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.042 (still bad) 2008-Jul-25 03:53:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.038 (still bad) 2008-Jul-25 03:53:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.039 (still bad) 2008-Jul-25 03:53:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:53:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:53:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.041 (still bad) 2008-Jul-25 03:53:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.044 (still bad) 2008-Jul-25 03:53:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:53:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.038 (still bad) 2008-Jul-25 03:53:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.041 (still bad) 2008-Jul-25 03:53:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.039 (still bad) 2008-Jul-25 03:53:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.037 (still bad) 2008-Jul-25 03:53:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.042 (still bad) 2008-Jul-25 03:54:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.037 (still bad) 2008-Jul-25 03:54:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.036 (still bad) 2008-Jul-25 03:54:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:54:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.039 (still bad) 2008-Jul-25 03:54:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:54:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.044 (still bad) 2008-Jul-25 03:54:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.039 (still bad) 2008-Jul-25 03:54:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.041 (still bad) 2008-Jul-25 03:54:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.042 (still bad) 2008-Jul-25 03:54:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:54:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:54:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.045 (still bad) 2008-Jul-25 03:54:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.041 (still bad) 2008-Jul-25 03:54:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.039 (still bad) 2008-Jul-25 03:54:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 03:54:29 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 0.932 1.042 2008-Jul-25 03:54:29 LOG4 check_wapp_levels: WAPP-2 power levels: 0.071 0.014 0.014 0.038 2008-Jul-25 03:54:29 LOG4 check_wapp_levels: WAPP-3 power levels: 0.107 0.014 0.026 0.014 2008-Jul-25 03:54:29 LOG4 check_wapp_levels: WAPP-4 power levels: 1.025 0.923 0.893 1.023 2008-Jul-25 03:54:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.039 (still bad) 2008-Jul-25 03:54:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:54:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.045 (still bad) 2008-Jul-25 03:54:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:54:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.037 (still bad) 2008-Jul-25 03:54:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:54:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.038 (still bad) 2008-Jul-25 03:54:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.038 (still bad) 2008-Jul-25 03:54:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.044 (still bad) 2008-Jul-25 03:54:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.037 (still bad) 2008-Jul-25 03:54:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.039 (still bad) 2008-Jul-25 03:54:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.041 (still bad) 2008-Jul-25 03:54:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:54:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.038 (still bad) 2008-Jul-25 03:54:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.043 (still bad) 2008-Jul-25 03:55:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:55:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.039 (still bad) 2008-Jul-25 03:55:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.042 (still bad) 2008-Jul-25 03:55:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.038 (still bad) 2008-Jul-25 03:55:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.038 (still bad) 2008-Jul-25 03:55:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.039 (still bad) 2008-Jul-25 03:55:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.038 (still bad) 2008-Jul-25 03:55:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:55:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.039 (still bad) 2008-Jul-25 03:55:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.039 (still bad) 2008-Jul-25 03:55:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.041 (still bad) 2008-Jul-25 03:55:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:55:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.039 (still bad) 2008-Jul-25 03:55:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.041 (still bad) 2008-Jul-25 03:55:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:55:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 03:55:31 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 0.929 1.038 2008-Jul-25 03:55:31 LOG4 check_wapp_levels: WAPP-2 power levels: 0.070 0.014 0.014 0.038 2008-Jul-25 03:55:31 LOG4 check_wapp_levels: WAPP-3 power levels: 0.106 0.014 0.026 0.014 2008-Jul-25 03:55:31 LOG4 check_wapp_levels: WAPP-4 power levels: 1.022 0.920 0.891 1.021 2008-Jul-25 03:55:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.039 (still bad) 2008-Jul-25 03:55:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.039 (still bad) 2008-Jul-25 03:55:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.038 (still bad) 2008-Jul-25 03:55:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.038 (still bad) 2008-Jul-25 03:55:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:55:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.038 (still bad) 2008-Jul-25 03:55:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.041 (still bad) 2008-Jul-25 03:55:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:55:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.039 (still bad) 2008-Jul-25 03:55:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:55:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:55:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.039 (still bad) 2008-Jul-25 03:55:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.041 (still bad) 2008-Jul-25 03:56:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:56:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.038 (still bad) 2008-Jul-25 03:56:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.041 (still bad) 2008-Jul-25 03:56:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.042 (still bad) 2008-Jul-25 03:56:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.039 (still bad) 2008-Jul-25 03:56:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:56:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.042 (still bad) 2008-Jul-25 03:56:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.039 (still bad) 2008-Jul-25 03:56:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.041 (still bad) 2008-Jul-25 03:56:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.041 (still bad) 2008-Jul-25 03:56:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:56:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.041 (still bad) 2008-Jul-25 03:56:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.042 (still bad) 2008-Jul-25 03:56:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:56:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.042 (still bad) 2008-Jul-25 03:56:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.042 (still bad) 2008-Jul-25 03:56:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 03:56:32 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 0.930 1.042 2008-Jul-25 03:56:32 LOG4 check_wapp_levels: WAPP-2 power levels: 0.070 0.014 0.014 0.037 2008-Jul-25 03:56:32 LOG4 check_wapp_levels: WAPP-3 power levels: 0.106 0.014 0.026 0.014 2008-Jul-25 03:56:32 LOG4 check_wapp_levels: WAPP-4 power levels: 1.019 0.921 0.890 1.022 2008-Jul-25 03:56:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.041 (still bad) 2008-Jul-25 03:56:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.042 (still bad) 2008-Jul-25 03:56:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.039 (still bad) 2008-Jul-25 03:56:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.039 (still bad) 2008-Jul-25 03:56:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.041 (still bad) 2008-Jul-25 03:56:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.039 (still bad) 2008-Jul-25 03:56:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.039 (still bad) 2008-Jul-25 03:56:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.038 (still bad) 2008-Jul-25 03:56:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.039 (still bad) 2008-Jul-25 03:56:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:56:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.036 (still bad) 2008-Jul-25 03:56:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.037 (still bad) 2008-Jul-25 03:56:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.044 (still bad) 2008-Jul-25 03:57:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.038 (still bad) 2008-Jul-25 03:57:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.038 (still bad) 2008-Jul-25 03:57:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:57:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.038 (still bad) 2008-Jul-25 03:57:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.039 (still bad) 2008-Jul-25 03:57:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.045 (still bad) 2008-Jul-25 03:57:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.041 (still bad) 2008-Jul-25 03:57:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.041 (still bad) 2008-Jul-25 03:57:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.041 (still bad) 2008-Jul-25 03:57:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:57:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:57:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.046 (still bad) 2008-Jul-25 03:57:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.039 (still bad) 2008-Jul-25 03:57:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.039 (still bad) 2008-Jul-25 03:57:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.042 (still bad) 2008-Jul-25 03:57:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.034 (still bad) 2008-Jul-25 03:57:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 03:57:33 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 0.929 1.038 2008-Jul-25 03:57:33 LOG4 check_wapp_levels: WAPP-2 power levels: 0.070 0.014 0.014 0.037 2008-Jul-25 03:57:33 LOG4 check_wapp_levels: WAPP-3 power levels: 0.106 0.014 0.026 0.014 2008-Jul-25 03:57:33 LOG4 check_wapp_levels: WAPP-4 power levels: 1.018 0.920 0.889 1.020 2008-Jul-25 03:57:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.043 (still bad) 2008-Jul-25 03:57:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:57:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.038 (still bad) 2008-Jul-25 03:57:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.039 (still bad) 2008-Jul-25 03:57:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.038 (still bad) 2008-Jul-25 03:57:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.037 (still bad) 2008-Jul-25 03:57:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.043 (still bad) 2008-Jul-25 03:57:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.037 (still bad) 2008-Jul-25 03:57:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.038 (still bad) 2008-Jul-25 03:57:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.039 (still bad) 2008-Jul-25 03:57:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.036 (still bad) 2008-Jul-25 03:57:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.037 (still bad) 2008-Jul-25 03:57:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.043 (still bad) 2008-Jul-25 03:58:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.037 (still bad) 2008-Jul-25 03:58:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.039 (still bad) 2008-Jul-25 03:58:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:58:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.035 (still bad) 2008-Jul-25 03:58:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.039 (still bad) 2008-Jul-25 03:58:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.042 (still bad) 2008-Jul-25 03:58:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.037 (still bad) 2008-Jul-25 03:58:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.037 (still bad) 2008-Jul-25 03:58:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.039 (still bad) 2008-Jul-25 03:58:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.035 (still bad) 2008-Jul-25 03:58:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.038 (still bad) 2008-Jul-25 03:58:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.044 (still bad) 2008-Jul-25 03:58:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.039 (still bad) 2008-Jul-25 03:58:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.038 (still bad) 2008-Jul-25 03:58:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:58:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.037 (still bad) 2008-Jul-25 03:58:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.039 (still bad) 2008-Jul-25 03:58:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 03:58:35 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 0.931 1.038 2008-Jul-25 03:58:35 LOG4 check_wapp_levels: WAPP-2 power levels: 0.070 0.014 0.014 0.038 2008-Jul-25 03:58:35 LOG4 check_wapp_levels: WAPP-3 power levels: 0.106 0.014 0.026 0.014 2008-Jul-25 03:58:35 LOG4 check_wapp_levels: WAPP-4 power levels: 1.020 0.921 0.890 1.022 2008-Jul-25 03:58:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.038 (still bad) 2008-Jul-25 03:58:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:58:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.041 (still bad) 2008-Jul-25 03:58:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.039 (still bad) 2008-Jul-25 03:58:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.038 (still bad) 2008-Jul-25 03:58:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.039 (still bad) 2008-Jul-25 03:58:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.037 (still bad) 2008-Jul-25 03:58:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.038 (still bad) 2008-Jul-25 03:58:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:58:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.039 (still bad) 2008-Jul-25 03:58:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.043 (still bad) 2008-Jul-25 03:59:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.039 (still bad) 2008-Jul-25 03:59:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.037 (still bad) 2008-Jul-25 03:59:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:59:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:59:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.039 (still bad) 2008-Jul-25 03:59:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.045 (still bad) 2008-Jul-25 03:59:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.039 (still bad) 2008-Jul-25 03:59:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.037 (still bad) 2008-Jul-25 03:59:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:59:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.038 (still bad) 2008-Jul-25 03:59:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.038 (still bad) 2008-Jul-25 03:59:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.039 (still bad) 2008-Jul-25 03:59:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:59:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.036 (still bad) 2008-Jul-25 03:59:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.038 (still bad) 2008-Jul-25 03:59:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.037 (still bad) 2008-Jul-25 03:59:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.038 (still bad) 2008-Jul-25 03:59:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.039 (still bad) 2008-Jul-25 03:59:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 03:59:36 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 0.931 1.039 2008-Jul-25 03:59:36 LOG4 check_wapp_levels: WAPP-2 power levels: 0.070 0.014 0.014 0.038 2008-Jul-25 03:59:36 LOG4 check_wapp_levels: WAPP-3 power levels: 0.106 0.014 0.026 0.014 2008-Jul-25 03:59:36 LOG4 check_wapp_levels: WAPP-4 power levels: 1.023 0.922 0.891 1.023 2008-Jul-25 03:59:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.038 (still bad) 2008-Jul-25 03:59:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.039 (still bad) 2008-Jul-25 03:59:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.040 (still bad) 2008-Jul-25 03:59:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.038 (still bad) 2008-Jul-25 03:59:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.039 (still bad) 2008-Jul-25 03:59:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.042 (still bad) 2008-Jul-25 03:59:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.039 (still bad) 2008-Jul-25 03:59:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.037 (still bad) 2008-Jul-25 03:59:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.039 (still bad) 2008-Jul-25 03:59:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jul-25 03:59:55 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jul-25 03:59:55 LOG5 end_task: Level: (4) ID = <10189> Status = 0 0 0 0 ok 2008-Jul-25 03:59:55 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jul-25 03:59:55 LOG5 end_task: Level: (3) ID = <10188> Status = 0 0 0 0 ok 2008-Jul-25 03:59:55 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Jul-25 03:59:55 LOG5 finish_task: Level: (2) ID = <10155> Status = 0 0 0 0 ok 2008-Jul-25 03:59:55 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Jul-25 03:59:55 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Jul-25 03:59:55 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Jul-25 03:59:55 LOG5 end_task: Level: (2) ID = <10155> Status = 0 0 0 0 ok 2008-Jul-25 03:59:55 COMMAND run_command_line: EXECUTING command 40: 'ENDIF' 2008-Jul-25 03:59:55 COMMAND run_command_line: EXECUTING command 43: 'IF LSTSLEW(AGES7448_p3_098) < 234926 THEN' 2008-Jul-25 03:59:56 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES7448_p3_098) < 234926 2008-Jul-25 03:59:56 INFO5 is_if_valid: Condition parsed as: 23.806707666666668 < 23.823888888888888 2008-Jul-25 03:59:56 COMMAND run_command_line: EXECUTING command 44: 'FIXEDDRIFT az=81.20 alfaangle=-55.7 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p3_098 ra=225000.00 dec=153330.00' 2008-Jul-25 03:59:56 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Jul-25 03:59:56 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Jul-25 03:59:56 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 81.20 -55.7 hcorcal 5 tracking no first 1 AGES7448_p3_098 225000.00 153330.00 J 8500.0 Heliocentric velocity(optical)' 2008-Jul-25 03:59:56 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Jul-25 03:59:56 LOG5 begin_task: Level: (2) ID = <10190> Status = 0 0 0 0 ok 2008-Jul-25 03:59:56 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES7448_p3_096' 2008-Jul-25 03:59:56 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Jul-25 03:59:56 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES7448_p3_098} 2008-Jul-25 03:59:56 INFO3 fixed_driftmap: Sending telescope to Az = 81.20 and ZA = 14.37 2008-Jul-25 03:59:56 LOG3 track_source: Calling 'track_source AGES7448_p3_098 81.20 14.3687014286 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Jul-25 03:59:56 START begin_task: Starting task 'sending tracking commands' 2008-Jul-25 03:59:56 LOG5 begin_task: Level: (3) ID = <10191> Status = 0 0 0 0 ok 2008-Jul-25 03:59:56 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7448_p3_098} INFO {Slewing to source 'AGES7448_p3_098' ...} 2008-Jul-25 03:59:56 INFO1 track_source: Starting to track AGES7448_p3_098 2008-Jul-25 03:59:56 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7448_p3_098" 2008-Jul-25 03:59:56 LOG3 vw_send: To DATATAKING: set ra 81.20 2008-Jul-25 03:59:56 LOG3 vw_send: To DATATAKING: set dec 14.3687014286 2008-Jul-25 03:59:56 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Jul-25 03:59:56 LOG3 vw_send: To DATATAKING: pnt tr 81.20 14.3687014286 -CF 2008-Jul-25 03:59:56 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Jul-25 03:59:57 STOP finish_task: Finishing task 'sending tracking commands' 2008-Jul-25 03:59:57 LOG5 finish_task: Level: (3) ID = <10191> Status = 0 0 0 0 ok 2008-Jul-25 03:59:57 INFO2 finish_task: DONE finished sending: tracking commands 2008-Jul-25 03:59:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-25 03:59:57 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Jul-25 03:59:57 LOG5 end_task: Level: (3) ID = <10191> Status = 0 0 0 0 ok 2008-Jul-25 03:59:57 START begin_task: Starting task 'rotate ALFA to -55.7 degrees' 2008-Jul-25 03:59:57 LOG5 begin_task: Level: (3) ID = <10192> Status = 0 0 0 0 ok 2008-Jul-25 03:59:57 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -55.7 degrees ...} 2008-Jul-25 03:59:57 INFO2 rotate_alfa: ALFA commanded to -55.7 degrees 2008-Jul-25 03:59:57 LOG3 sock_errsend: To ALFAMOTOR: POSITION -55.7 REPLY 2008-Jul-25 03:59:57 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Jul-25 03:59:57 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Jul-25 03:59:57 LOG5 begin_task: Level: (4) ID = <10193> Status = 0 0 0 0 ok 2008-Jul-25 03:59:57 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7448_p3_098" 2008-Jul-25 03:59:57 LOG4 got_cormsg: From DATATAKING: set ra 81.20 2008-Jul-25 03:59:57 LOG4 got_cormsg: From DATATAKING: set dec 14.3687014286 2008-Jul-25 03:59:57 LOG4 got_cormsg: From DATATAKING: vw% 81.20 2008-Jul-25 03:59:57 LOG4 got_cormsg: From DATATAKING: vw% 14.3687014286 2008-Jul-25 03:59:57 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 03:59:57 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Jul-25 03:59:57 LOG4 got_cormsg: From DATATAKING: pnt tr 81.20 14.3687014286 -CF 2008-Jul-25 03:59:57 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Jul-25 03:59:57 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Jul-25 03:59:57 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 03:59:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.038 (still bad) 2008-Jul-25 04:00:02 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Jul-25 04:00:02 INFO3 alfa_motor: ALFA rotator in-position -55.70 degrees 2008-Jul-25 04:00:02 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Jul-25 04:00:02 LOG5 end_task: Level: (4) ID = <10193> Status = 0 0 0 0 ok 2008-Jul-25 04:00:02 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Jul-25 04:00:02 STOP finish_task: Finishing task 'rotate ALFA to -55.7 degrees' 2008-Jul-25 04:00:02 LOG5 finish_task: Level: (3) ID = <10192> Status = 0 0 0 0 ok 2008-Jul-25 04:00:02 INFO2 finish_task: DONE finished configuration: rotating ALFA to -55.7 degrees 2008-Jul-25 04:00:02 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-25 04:00:02 STOP end_task: Finishing task 'rotate ALFA to -55.7 degrees' with status 'OK' 2008-Jul-25 04:00:02 LOG5 end_task: Level: (3) ID = <10192> Status = 0 0 0 0 ok 2008-Jul-25 04:00:02 START begin_task: Starting task 'waiting on telescope' 2008-Jul-25 04:00:02 LOG5 begin_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2008-Jul-25 04:00:02 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Jul-25 04:00:02 LOG3 waittrk: Start waittrk 5 2008-Jul-25 04:00:02 START begin_task: Starting task 'waiting on telescope movement' 2008-Jul-25 04:00:02 LOG5 begin_task: Level: (4) ID = <10195> Status = 0 0 0 0 ok 2008-Jul-25 04:00:07 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Jul-25 04:00:07 LOG5 end_task: Level: (4) ID = <10195> Status = 0 0 0 0 ok 2008-Jul-25 04:00:07 START begin_task: Starting task 'waiting on telescope on source' 2008-Jul-25 04:00:07 LOG5 begin_task: Level: (4) ID = <10196> Status = 0 0 0 0 ok 2008-Jul-25 04:02:16 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Jul-25 04:02:16 LOG5 end_task: Level: (4) ID = <10196> Status = 0 0 0 0 ok 2008-Jul-25 04:02:16 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Jul-25 04:02:16 INFO2 waittrk: Now tracking AGES7448_p3_098 2008-Jul-25 04:02:16 LOG4 waittrk: Current telescope position: Az = 440.99 ZA = 14.37 2008-Jul-25 04:02:16 STOP finish_task: Finishing task 'waiting on telescope' 2008-Jul-25 04:02:16 LOG5 finish_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2008-Jul-25 04:02:16 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Jul-25 04:02:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-25 04:02:16 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Jul-25 04:02:16 LOG5 end_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2008-Jul-25 04:02:16 START begin_task: Starting task 'selecting calibration type' 2008-Jul-25 04:02:16 LOG5 begin_task: Level: (3) ID = <10197> Status = 0 0 0 0 ok 2008-Jul-25 04:02:16 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Jul-25 04:02:17 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Jul-25 04:02:17 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jul-25 04:02:17 START begin_task: Starting task 'waiting on setcal' 2008-Jul-25 04:02:17 LOG5 begin_task: Level: (4) ID = <10198> Status = 0 0 0 0 ok 2008-Jul-25 04:02:17 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Jul-25 04:02:17 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jul-25 04:02:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:02:17 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jul-25 04:02:17 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Jul-25 04:02:17 LOG5 end_task: Level: (4) ID = <10198> Status = 0 0 0 0 ok 2008-Jul-25 04:02:18 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Jul-25 04:02:18 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jul-25 04:02:18 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Jul-25 04:02:18 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jul-25 04:02:18 LOG5 begin_task: Level: (4) ID = <10199> Status = 0 0 0 0 ok 2008-Jul-25 04:02:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:02:18 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jul-25 04:02:18 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jul-25 04:02:18 LOG5 end_task: Level: (4) ID = <10199> Status = 0 0 0 0 ok 2008-Jul-25 04:02:18 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jul-25 04:02:18 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Jul-25 04:02:18 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jul-25 04:02:18 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Jul-25 04:02:18 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jul-25 04:02:18 LOG5 begin_task: Level: (4) ID = <10200> Status = 0 0 0 0 ok 2008-Jul-25 04:02:18 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jul-25 04:02:18 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jul-25 04:02:18 LOG5 end_task: Level: (4) ID = <10200> Status = 0 0 0 0 ok 2008-Jul-25 04:02:18 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jul-25 04:02:18 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Jul-25 04:02:18 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Jul-25 04:02:18 LOG5 end_task: Level: (3) ID = <10197> Status = 0 0 0 0 ok 2008-Jul-25 04:02:18 LOG5 dopset_later: Calling 'dopset_later 34.692530770136848' 2008-Jul-25 04:02:18 INFO3 dopset_later: Setting Doppler correction for 04:02:52 (34.7 seconds from now) 2008-Jul-25 04:02:18 LOG5 antvel: Calling 'antvel 81.200000 14.368701 F 34.692530770136848' 2008-Jul-25 04:02:18 LOG2 antvel: Transforming current Az = 81.20 ZA = 14.37 to apparent RA = 22:50:26.9 Dec = +15:36:17.2 2008-Jul-25 04:02:18 LOG2 antvel: Parameters to Doppler: Heliocentric 28972 2008 207 0.0 2008-Jul-25 04:02:18 INFO5 antvel: Computed antenna velocity: -19.96434 km/s 2008-Jul-25 04:02:18 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-19.964339325200001 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Jul-25 04:02:18 INFO4 dopset_gen: New sky frequencies: 1381.335417 1381.335417 1381.335417 1381.335417 1381.335417 1381.335417 1381.335417 1381.335417 1381.335417 2008-Jul-25 04:02:18 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.335417 sky0=1381.335417 sky1=1381.335417 sky2=1381.335417 sky3=1381.335417 sky4=1381.335417 sky5=1381.335417 sky6=1381.335417 sky7=1381.335417 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jul-25 04:02:18 LOG2 dopset_gen: Result from 'sky2syn': 1631.335417 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jul-25 04:02:18 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631335417.0} 2008-Jul-25 04:02:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 04:02:18 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Jul-25 04:02:18 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Jul-25 04:02:18 INFO5 fixed_driftmap: Tracking J2000 position: RA = 22:49:29.8 Dec = +15:33:33.5 2008-Jul-25 04:02:18 LOG3 track_source: Calling 'track_source AGES7448_p3_098 224929.8 153333.5 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Jul-25 04:02:18 START begin_task: Starting task 'sending tracking commands' 2008-Jul-25 04:02:18 LOG5 begin_task: Level: (3) ID = <10201> Status = 0 0 0 0 ok 2008-Jul-25 04:02:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7448_p3_098} INFO {Slewing to source 'AGES7448_p3_098' ...} 2008-Jul-25 04:02:18 INFO1 track_source: Starting to track AGES7448_p3_098 2008-Jul-25 04:02:18 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7448_p3_098" 2008-Jul-25 04:02:18 LOG3 vw_send: To DATATAKING: set ra 224929.8 2008-Jul-25 04:02:18 LOG3 vw_send: To DATATAKING: set dec 153333.5 2008-Jul-25 04:02:18 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Jul-25 04:02:18 LOG3 vw_send: To DATATAKING: pnt tr 224929.8 153333.5 -CJ 2008-Jul-25 04:02:18 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Jul-25 04:02:18 STOP finish_task: Finishing task 'sending tracking commands' 2008-Jul-25 04:02:18 LOG5 finish_task: Level: (3) ID = <10201> Status = 0 0 0 0 ok 2008-Jul-25 04:02:18 INFO2 finish_task: DONE finished sending: tracking commands 2008-Jul-25 04:02:18 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-25 04:02:18 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Jul-25 04:02:18 LOG5 end_task: Level: (3) ID = <10201> Status = 0 0 0 0 ok 2008-Jul-25 04:02:18 START begin_task: Starting task 'waiting on telescope' 2008-Jul-25 04:02:18 LOG5 begin_task: Level: (3) ID = <10202> Status = 0 0 0 0 ok 2008-Jul-25 04:02:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Jul-25 04:02:18 LOG3 waittrk: Start waittrk 5 2008-Jul-25 04:02:18 START begin_task: Starting task 'waiting on telescope movement' 2008-Jul-25 04:02:18 LOG5 begin_task: Level: (4) ID = <10203> Status = 0 0 0 0 ok 2008-Jul-25 04:02:18 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631335417.0} 2008-Jul-25 04:02:18 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 04:02:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:02:18 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7448_p3_098" 2008-Jul-25 04:02:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:02:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:02:18 LOG4 got_cormsg: From DATATAKING: set ra 224929.8 2008-Jul-25 04:02:18 LOG4 got_cormsg: From DATATAKING: set dec 153333.5 2008-Jul-25 04:02:18 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Jul-25 04:02:18 LOG4 got_cormsg: From DATATAKING: pnt tr 224929.8 153333.5 -CJ 2008-Jul-25 04:02:18 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Jul-25 04:02:18 LOG4 got_cormsg: From DATATAKING: 224929.8 2008-Jul-25 04:02:18 LOG4 got_cormsg: From DATATAKING: vw% 153333.5 2008-Jul-25 04:02:18 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2008-Jul-25 04:02:23 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Jul-25 04:02:23 LOG5 end_task: Level: (4) ID = <10203> Status = 0 0 0 0 ok 2008-Jul-25 04:02:23 START begin_task: Starting task 'waiting on telescope on source' 2008-Jul-25 04:02:23 LOG5 begin_task: Level: (4) ID = <10204> Status = 0 0 0 0 ok 2008-Jul-25 04:02:25 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Jul-25 04:02:25 LOG5 end_task: Level: (4) ID = <10204> Status = 0 0 0 0 ok 2008-Jul-25 04:02:25 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Jul-25 04:02:25 INFO2 waittrk: Now tracking AGES7448_p3_098 2008-Jul-25 04:02:25 LOG4 waittrk: Current telescope position: Az = 441.00 ZA = 14.39 2008-Jul-25 04:02:25 STOP finish_task: Finishing task 'waiting on telescope' 2008-Jul-25 04:02:25 LOG5 finish_task: Level: (3) ID = <10202> Status = 0 0 0 0 ok 2008-Jul-25 04:02:25 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Jul-25 04:02:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-25 04:02:25 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Jul-25 04:02:25 LOG5 end_task: Level: (3) ID = <10202> Status = 0 0 0 0 ok 2008-Jul-25 04:02:25 START begin_task: Starting task 'adjusting WAPP power' 2008-Jul-25 04:02:25 LOG5 begin_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2008-Jul-25 04:02:26 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Jul-25 04:02:26 INFO2 adjust_power: Starting to adjust WAPP power 2008-Jul-25 04:02:26 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Jul-25 04:02:26 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Jul-25 04:02:26 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jul-25 04:02:26 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Jul-25 04:02:26 LOG5 begin_task: Level: (4) ID = <10206> Status = 0 0 0 0 ok 2008-Jul-25 04:02:26 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Jul-25 04:02:26 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jul-25 04:02:28 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:02:29 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jul-25 04:02:29 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Jul-25 04:02:29 LOG5 end_task: Level: (4) ID = <10206> Status = 0 0 0 0 ok 2008-Jul-25 04:02:29 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Jul-25 04:02:29 START begin_task: Starting task 'adjusting WAPP power' 2008-Jul-25 04:02:29 LOG5 begin_task: Level: (4) ID = <10207> Status = 0 0 0 0 ok 2008-Jul-25 04:02:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Jul-25 04:02:29 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Jul-25 04:02:29 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Jul-25 04:02:29 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Jul-25 04:02:29 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Jul-25 04:02:29 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Jul-25 04:02:29 LOG5 begin_task: Level: (5) ID = <10208> Status = 0 0 0 0 ok 2008-Jul-25 04:02:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:02:29 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Jul-25 04:02:29 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 0 0 dB --- beam 1: 6 1 dB 2008-Jul-25 04:02:29 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 0 dB --- beam 5: 0 0 dB 2008-Jul-25 04:02:29 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 0 0 dB --- beam 3: 0 0 dB 2008-Jul-25 04:02:29 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 2 dB --- beam 7: 2 2 dB 2008-Jul-25 04:02:29 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Jul-25 04:02:29 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Jul-25 04:02:29 LOG5 end_task: Level: (5) ID = <10208> Status = 0 0 0 0 ok 2008-Jul-25 04:02:29 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.022 0.018 ALFA beam 1: 0.953 1.068 2008-Jul-25 04:02:29 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.070 0.014 ALFA beam 3: 0.014 0.038 2008-Jul-25 04:02:29 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.108 0.014 ALFA beam 5: 0.026 0.014 2008-Jul-25 04:02:29 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.071 0.964 ALFA beam 7: 0.936 1.070 2008-Jul-25 04:02:29 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Jul-25 04:02:29 LOG5 finish_task: Level: (4) ID = <10207> Status = 0 0 0 0 ok 2008-Jul-25 04:02:29 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Jul-25 04:02:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-25 04:02:29 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Jul-25 04:02:29 LOG5 end_task: Level: (4) ID = <10207> Status = 0 0 0 0 ok 2008-Jul-25 04:02:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Jul-25 04:02:29 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Jul-25 04:02:29 LOG5 finish_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2008-Jul-25 04:02:29 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Jul-25 04:02:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-25 04:02:29 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Jul-25 04:02:29 LOG5 end_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2008-Jul-25 04:02:29 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 JID 2008-Jul-25 04:02:29 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 JID 2008-Jul-25 04:02:29 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 JID 2008-Jul-25 04:02:29 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 JID 2008-Jul-25 04:02:30 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Jul-25 04:02:30 START begin_task: Starting task 'WAPP calibration' 2008-Jul-25 04:02:30 LOG5 begin_task: Level: (3) ID = <10209> Status = 0 0 0 0 ok 2008-Jul-25 04:02:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Jul-25 04:02:30 START begin_task: Starting task 'selecting calibration type' 2008-Jul-25 04:02:30 LOG5 begin_task: Level: (4) ID = <10210> Status = 0 0 0 0 ok 2008-Jul-25 04:02:30 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Jul-25 04:02:30 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Jul-25 04:02:30 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jul-25 04:02:30 START begin_task: Starting task 'waiting on setcal' 2008-Jul-25 04:02:30 LOG5 begin_task: Level: (5) ID = <10211> Status = 0 0 0 0 ok 2008-Jul-25 04:02:30 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 JID' 2008-Jul-25 04:02:30 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Jul-25 04:02:30 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jul-25 04:02:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:02:30 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jul-25 04:02:30 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Jul-25 04:02:30 LOG5 end_task: Level: (5) ID = <10211> Status = 0 0 0 0 ok 2008-Jul-25 04:02:30 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Jul-25 04:02:30 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jul-25 04:02:30 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Jul-25 04:02:30 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jul-25 04:02:30 LOG5 begin_task: Level: (5) ID = <10212> Status = 0 0 0 0 ok 2008-Jul-25 04:02:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:02:30 NOTE WAPPDATA-new_file: New FITS file: wapp.20080725.a2048.0004.fits 2008-Jul-25 04:02:30 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080725.a2048.0004.fits} 2008-Jul-25 04:02:30 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jul-25 04:02:30 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jul-25 04:02:30 LOG5 end_task: Level: (5) ID = <10212> Status = 0 0 0 0 ok 2008-Jul-25 04:02:30 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jul-25 04:02:30 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Jul-25 04:02:30 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jul-25 04:02:30 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Jul-25 04:02:30 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jul-25 04:02:30 LOG5 begin_task: Level: (5) ID = <10213> Status = 0 0 0 0 ok 2008-Jul-25 04:02:30 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jul-25 04:02:30 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jul-25 04:02:30 LOG5 end_task: Level: (5) ID = <10213> Status = 0 0 0 0 ok 2008-Jul-25 04:02:30 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jul-25 04:02:30 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Jul-25 04:02:30 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Jul-25 04:02:30 LOG5 end_task: Level: (4) ID = <10210> Status = 0 0 0 0 ok 2008-Jul-25 04:02:30 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Jul-25 04:02:31 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Jul-25 04:02:31 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Jul-25 04:02:31 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jul-25 04:02:31 LOG5 begin_task: Level: (4) ID = <10214> Status = 0 0 0 0 ok 2008-Jul-25 04:02:31 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jul-25 04:02:31 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Jul-25 04:02:31 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jul-25 04:02:31 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jul-25 04:02:31 LOG5 end_task: Level: (4) ID = <10214> Status = 0 0 0 0 ok 2008-Jul-25 04:02:31 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Jul-25 04:02:31 LOG4 take_data: Calling 'take_data 5 5 CAL ON -' 2008-Jul-25 04:02:31 START begin_task: Starting task 'WAPP spectral observation' 2008-Jul-25 04:02:31 LOG5 begin_task: Level: (4) ID = <10215> Status = 0 0 0 0 ok 2008-Jul-25 04:02:31 LOG5 log_alfabeam: Parameters: 22.824944444444441 15.559305555555556 23.818215 2008.5671961746141 -55.700092 2008-Jul-25 04:02:31 LOG4 log_alfabeam: ALFABEAM 0 22.824944444444444 15.559305555555557 2008-Jul-25 04:02:31 LOG4 log_alfabeam: ALFABEAM 1 22.824074191511453 15.649911064332091 2008-Jul-25 04:02:31 LOG4 log_alfabeam: ALFABEAM 2 22.818197777286525 15.589814264903733 2008-Jul-25 04:02:31 LOG4 log_alfabeam: ALFABEAM 3 22.819096562842969 15.498668634911651 2008-Jul-25 04:02:31 LOG4 log_alfabeam: ALFABEAM 4 22.825853510533481 15.468730614513365 2008-Jul-25 04:02:31 LOG4 log_alfabeam: ALFABEAM 5 22.831691613037997 15.529392167112018 2008-Jul-25 04:02:31 LOG4 log_alfabeam: ALFABEAM 6 22.830811072768991 15.619427627777938 2008-Jul-25 04:02:31 INFO2 take_data: Starting WAPP scan: 820700014 2008-Jul-25 04:02:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Jul-25 04:02:31 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jul-25 04:02:31 LOG5 begin_task: Level: (5) ID = <10216> Status = 0 0 0 0 ok 2008-Jul-25 04:02:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jul-25 04:02:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 04:02:31 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 0.953 1.068 2008-Jul-25 04:02:31 LOG4 check_wapp_levels: WAPP-2 power levels: 0.070 0.014 0.014 0.038 2008-Jul-25 04:02:31 LOG4 check_wapp_levels: WAPP-3 power levels: 0.108 0.014 0.026 0.014 2008-Jul-25 04:02:31 LOG4 check_wapp_levels: WAPP-4 power levels: 1.071 0.964 0.936 1.070 2008-Jul-25 04:02:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 28952.00 2008-Jul-25 04:02:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.335417 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jul-25 04:02:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.335417 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 04:02:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.335417 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 04:02:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.335417 MHz Flip = 1 Band = 0 Mixer = 944.589620 MHz 2008-Jul-25 04:02:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.335417 MHz Flip = 1 Band = 0 Mixer = 942.632164 MHz 2008-Jul-25 04:02:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2008-Jul-25 04:02:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.335417 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Jul-25 04:02:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.335417 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Jul-25 04:02:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.335417 MHz Flip = 1 Band = 0 Mixer = 1978.000000 MHz 2008-Jul-25 04:02:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.335417 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2008-Jul-25 04:02:37 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jul-25 04:02:37 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jul-25 04:02:37 LOG5 end_task: Level: (5) ID = <10216> Status = 0 0 0 0 ok 2008-Jul-25 04:02:37 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jul-25 04:02:37 LOG5 end_task: Level: (4) ID = <10215> Status = 0 0 0 0 ok 2008-Jul-25 04:02:37 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Jul-25 04:02:37 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Jul-25 04:02:37 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Jul-25 04:02:37 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jul-25 04:02:37 LOG5 begin_task: Level: (4) ID = <10217> Status = 0 0 0 0 ok 2008-Jul-25 04:02:38 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jul-25 04:02:38 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jul-25 04:02:38 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jul-25 04:02:38 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jul-25 04:02:38 LOG5 end_task: Level: (4) ID = <10217> Status = 0 0 0 0 ok 2008-Jul-25 04:02:38 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Jul-25 04:02:38 LOG4 take_data: Calling 'take_data 5 5 CAL OFF -' 2008-Jul-25 04:02:38 START begin_task: Starting task 'WAPP spectral observation' 2008-Jul-25 04:02:38 LOG5 begin_task: Level: (4) ID = <10218> Status = 0 0 0 0 ok 2008-Jul-25 04:02:38 LOG5 log_alfabeam: Parameters: 22.824944444444441 15.559305555555556 23.820165 2008.5671963964307 -55.700092 2008-Jul-25 04:02:38 LOG4 log_alfabeam: ALFABEAM 0 22.824944444444444 15.559305555555557 2008-Jul-25 04:02:38 LOG4 log_alfabeam: ALFABEAM 1 22.824076008820722 15.649914753646819 2008-Jul-25 04:02:38 LOG4 log_alfabeam: ALFABEAM 2 22.818198399461348 15.589842481256953 2008-Jul-25 04:02:38 LOG4 log_alfabeam: ALFABEAM 3 22.819095305900156 15.498694123175813 2008-Jul-25 04:02:38 LOG4 log_alfabeam: ALFABEAM 4 22.825851616927903 15.468726697312221 2008-Jul-25 04:02:38 LOG4 log_alfabeam: ALFABEAM 5 22.831690997342005 15.529362676211205 2008-Jul-25 04:02:38 LOG4 log_alfabeam: ALFABEAM 6 22.830812288832782 15.619403011606860 2008-Jul-25 04:02:38 INFO2 take_data: Starting WAPP scan: 820700015 2008-Jul-25 04:02:38 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Jul-25 04:02:38 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jul-25 04:02:38 LOG5 begin_task: Level: (5) ID = <10219> Status = 0 0 0 0 ok 2008-Jul-25 04:02:38 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jul-25 04:02:38 INFO1 WAPP=1+2+3+4-start_spectra: start sec 28959.00 2008-Jul-25 04:02:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.473 (still bad) 2008-Jul-25 04:02:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.335417 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jul-25 04:02:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.335417 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 04:02:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.335417 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 04:02:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.335417 MHz Flip = 1 Band = 0 Mixer = 944.589620 MHz 2008-Jul-25 04:02:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.335417 MHz Flip = 1 Band = 0 Mixer = 942.632164 MHz 2008-Jul-25 04:02:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.335417 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Jul-25 04:02:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.335417 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Jul-25 04:02:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.335417 MHz Flip = 1 Band = 0 Mixer = 1978.000000 MHz 2008-Jul-25 04:02:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.335417 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2008-Jul-25 04:02:44 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Jul-25 04:02:44 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jul-25 04:02:44 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jul-25 04:02:44 LOG5 end_task: Level: (5) ID = <10219> Status = 0 0 0 0 ok 2008-Jul-25 04:02:44 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jul-25 04:02:44 LOG5 end_task: Level: (4) ID = <10218> Status = 0 0 0 0 ok 2008-Jul-25 04:02:44 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Jul-25 04:02:44 STOP finish_task: Finishing task 'WAPP calibration' 2008-Jul-25 04:02:44 LOG5 finish_task: Level: (3) ID = <10209> Status = 0 0 0 0 ok 2008-Jul-25 04:02:44 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Jul-25 04:02:44 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-25 04:02:44 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Jul-25 04:02:44 LOG5 end_task: Level: (3) ID = <10209> Status = 0 0 0 0 ok 2008-Jul-25 04:02:45 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Jul-25 04:02:45 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 81.20 and ZA = 14.37 2008-Jul-25 04:02:45 LOG3 track_source: Calling 'track_source AGES7448_p3_098 81.20 14.3687014286 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Jul-25 04:02:45 START begin_task: Starting task 'sending tracking commands' 2008-Jul-25 04:02:45 LOG5 begin_task: Level: (3) ID = <10220> Status = 0 0 0 0 ok 2008-Jul-25 04:02:45 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7448_p3_098} INFO {Slewing to source 'AGES7448_p3_098' ...} 2008-Jul-25 04:02:45 INFO1 track_source: Starting to track AGES7448_p3_098 2008-Jul-25 04:02:45 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7448_p3_098" 2008-Jul-25 04:02:45 LOG3 vw_send: To DATATAKING: set ra 81.20 2008-Jul-25 04:02:45 LOG3 vw_send: To DATATAKING: set dec 14.3687014286 2008-Jul-25 04:02:45 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Jul-25 04:02:45 LOG3 vw_send: To DATATAKING: pnt tr 81.20 14.3687014286 -CF 2008-Jul-25 04:02:45 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Jul-25 04:02:45 STOP finish_task: Finishing task 'sending tracking commands' 2008-Jul-25 04:02:45 LOG5 finish_task: Level: (3) ID = <10220> Status = 0 0 0 0 ok 2008-Jul-25 04:02:45 INFO2 finish_task: DONE finished sending: tracking commands 2008-Jul-25 04:02:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-25 04:02:45 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Jul-25 04:02:45 LOG5 end_task: Level: (3) ID = <10220> Status = 0 0 0 0 ok 2008-Jul-25 04:02:45 LOG1 fixed_driftmap: Parameters: HA = +00:59:00.3 Start = 23:49:27.3 LST = 23:49:19.6 diff = 7.7 secs 2008-Jul-25 04:02:45 INFO2 fixed_driftmap: Waiting 5.7 seconds for RA 22:50:27 2008-Jul-25 04:02:45 INFO2 lstwait: Waiting for 5.7 secs from LST 23:49:20 to LST 23:49:25 ... 2008-Jul-25 04:02:45 LOG4 send_obs_status: To obs_status: <1> TASKTIME 5.6999089589446124 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Jul-25 04:02:45 START begin_task: Starting task 'waiting on wait on LST' 2008-Jul-25 04:02:45 LOG5 begin_task: Level: (3) ID = <10221> Status = 0 0 0 0 ok 2008-Jul-25 04:02:45 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7448_p3_098" 2008-Jul-25 04:02:45 LOG4 got_cormsg: From DATATAKING: set ra 81.20 2008-Jul-25 04:02:45 LOG4 got_cormsg: From DATATAKING: set dec 14.3687014286 2008-Jul-25 04:02:45 LOG4 got_cormsg: From DATATAKING: vw% 81.20 2008-Jul-25 04:02:45 LOG4 got_cormsg: From DATATAKING: vw% 14.3687014286 2008-Jul-25 04:02:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:02:45 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Jul-25 04:02:45 LOG4 got_cormsg: From DATATAKING: pnt tr 81.20 14.3687014286 -CF 2008-Jul-25 04:02:45 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Jul-25 04:02:45 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Jul-25 04:02:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:02:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:02:51 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Jul-25 04:02:51 LOG5 end_task: Level: (3) ID = <10221> Status = 0 0 0 0 ok 2008-Jul-25 04:02:51 LOG4 lstwait: Finished waiting 0.30 seconds late 2008-Jul-25 04:02:51 INFO3 lstwait: Finished waiting 2008-Jul-25 04:02:51 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Jul-25 04:02:51 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Jul-25 04:02:51 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Jul-25 04:02:51 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Jul-25 04:02:51 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Jul-25 04:02:51 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ -' 2008-Jul-25 04:02:51 START begin_task: Starting task 'WAPP spectral observation' 2008-Jul-25 04:02:51 LOG5 begin_task: Level: (3) ID = <10222> Status = 0 0 0 0 ok 2008-Jul-25 04:02:51 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jul-25 04:02:51 INFO2 take_data: Starting WAPP scan: 820700016 2008-Jul-25 04:02:51 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Jul-25 04:02:51 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jul-25 04:02:51 LOG5 begin_task: Level: (4) ID = <10223> Status = 0 0 0 0 ok 2008-Jul-25 04:02:51 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jul-25 04:02:51 INFO1 WAPP=1+2+3+4-start_spectra: start sec 28972.00 2008-Jul-25 04:02:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.335417 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jul-25 04:02:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.335417 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 04:02:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.335417 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 04:02:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.335417 MHz Flip = 1 Band = 0 Mixer = 944.589620 MHz 2008-Jul-25 04:02:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.335417 MHz Flip = 1 Band = 0 Mixer = 942.632164 MHz 2008-Jul-25 04:02:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.335417 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Jul-25 04:02:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.335417 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Jul-25 04:02:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.335417 MHz Flip = 1 Band = 0 Mixer = 1978.000000 MHz 2008-Jul-25 04:02:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.335417 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2008-Jul-25 04:02:53 WARNING WAPP=1+2+3+4-start_spectra: WARNING observing when not on source 2008-Jul-25 04:02:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:02:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2008-Jul-25 04:02:57 NOTE WAPP=1+2+3+4-start_spectra: Observing now on source 2008-Jul-25 04:02:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2008-Jul-25 04:02:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 04:03:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2008-Jul-25 04:03:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2008-Jul-25 04:03:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:03:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2008-Jul-25 04:03:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:03:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.080 (still bad) 2008-Jul-25 04:03:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:03:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2008-Jul-25 04:03:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2008-Jul-25 04:03:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 04:03:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:03:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.080 (still bad) 2008-Jul-25 04:03:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:03:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:03:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:03:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2008-Jul-25 04:03:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 04:03:33 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 0.956 1.070 2008-Jul-25 04:03:33 LOG4 check_wapp_levels: WAPP-2 power levels: 0.070 0.014 0.014 0.038 2008-Jul-25 04:03:33 LOG4 check_wapp_levels: WAPP-3 power levels: 0.108 0.014 0.026 0.014 2008-Jul-25 04:03:33 LOG4 check_wapp_levels: WAPP-4 power levels: 1.073 0.962 0.935 1.067 2008-Jul-25 04:03:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.079 (still bad) 2008-Jul-25 04:03:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:03:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:03:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2008-Jul-25 04:03:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:03:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:03:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.080 (still bad) 2008-Jul-25 04:03:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:03:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:03:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:03:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:03:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:04:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.079 (still bad) 2008-Jul-25 04:04:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:04:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:04:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:04:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:04:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:04:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.080 (still bad) 2008-Jul-25 04:04:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:04:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:04:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:04:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:04:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:04:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.079 (still bad) 2008-Jul-25 04:04:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:04:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:04:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:04:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2008-Jul-25 04:04:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 04:04:34 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 0.955 1.069 2008-Jul-25 04:04:34 LOG4 check_wapp_levels: WAPP-2 power levels: 0.070 0.014 0.014 0.039 2008-Jul-25 04:04:34 LOG4 check_wapp_levels: WAPP-3 power levels: 0.109 0.014 0.026 0.014 2008-Jul-25 04:04:34 LOG4 check_wapp_levels: WAPP-4 power levels: 1.072 0.962 0.934 1.070 2008-Jul-25 04:04:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2008-Jul-25 04:04:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:04:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:04:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:04:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:04:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:04:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.079 (still bad) 2008-Jul-25 04:04:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:04:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:04:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:04:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:04:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:05:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.078 (still bad) 2008-Jul-25 04:05:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:05:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:05:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:05:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:05:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2008-Jul-25 04:05:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 04:05:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:05:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:05:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2008-Jul-25 04:05:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:05:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.078 (still bad) 2008-Jul-25 04:05:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:05:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:05:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:05:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:05:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:05:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 04:05:35 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 0.961 1.079 2008-Jul-25 04:05:35 LOG4 check_wapp_levels: WAPP-2 power levels: 0.072 0.014 0.014 0.043 2008-Jul-25 04:05:35 LOG4 check_wapp_levels: WAPP-3 power levels: 0.108 0.014 0.026 0.014 2008-Jul-25 04:05:35 LOG4 check_wapp_levels: WAPP-4 power levels: 1.073 0.962 0.935 1.070 2008-Jul-25 04:05:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2008-Jul-25 04:05:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:05:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:05:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:05:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:05:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2008-Jul-25 04:05:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2008-Jul-25 04:05:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:05:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:05:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:05:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:05:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.079 (still bad) 2008-Jul-25 04:06:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 04:06:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:06:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:06:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2008-Jul-25 04:06:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:06:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.079 (still bad) 2008-Jul-25 04:06:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 04:06:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:06:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:06:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:06:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:06:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.079 (still bad) 2008-Jul-25 04:06:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:06:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:06:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:06:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2008-Jul-25 04:06:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:06:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 04:06:36 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 0.963 1.077 2008-Jul-25 04:06:36 LOG4 check_wapp_levels: WAPP-2 power levels: 0.072 0.014 0.014 0.043 2008-Jul-25 04:06:36 LOG4 check_wapp_levels: WAPP-3 power levels: 0.109 0.014 0.026 0.014 2008-Jul-25 04:06:36 LOG4 check_wapp_levels: WAPP-4 power levels: 1.079 0.971 0.941 1.078 2008-Jul-25 04:06:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:06:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2008-Jul-25 04:06:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:06:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:06:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:06:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2008-Jul-25 04:06:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:06:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:06:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:06:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:06:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:07:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.078 (still bad) 2008-Jul-25 04:07:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:07:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:07:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:07:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2008-Jul-25 04:07:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2008-Jul-25 04:07:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2008-Jul-25 04:07:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2008-Jul-25 04:07:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2008-Jul-25 04:07:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:07:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:07:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:07:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 04:07:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:07:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:07:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:07:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2008-Jul-25 04:07:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:07:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.078 (still bad) 2008-Jul-25 04:07:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 04:07:38 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 0.958 1.073 2008-Jul-25 04:07:38 LOG4 check_wapp_levels: WAPP-2 power levels: 0.070 0.014 0.014 0.038 2008-Jul-25 04:07:38 LOG4 check_wapp_levels: WAPP-3 power levels: 0.109 0.014 0.026 0.014 2008-Jul-25 04:07:38 LOG4 check_wapp_levels: WAPP-4 power levels: 1.070 0.963 0.932 1.068 2008-Jul-25 04:07:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2008-Jul-25 04:07:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 04:07:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:07:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2008-Jul-25 04:07:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 04:07:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:07:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2008-Jul-25 04:07:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:07:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2008-Jul-25 04:07:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 04:08:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:08:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2008-Jul-25 04:08:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:08:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2008-Jul-25 04:08:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2008-Jul-25 04:08:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2008-Jul-25 04:08:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:08:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:08:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:08:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:08:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2008-Jul-25 04:08:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 04:08:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 04:08:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:08:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:08:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:08:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:08:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2008-Jul-25 04:08:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:08:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 04:08:39 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 0.955 1.072 2008-Jul-25 04:08:39 LOG4 check_wapp_levels: WAPP-2 power levels: 0.070 0.014 0.014 0.039 2008-Jul-25 04:08:39 LOG4 check_wapp_levels: WAPP-3 power levels: 0.108 0.014 0.026 0.014 2008-Jul-25 04:08:39 LOG4 check_wapp_levels: WAPP-4 power levels: 1.072 0.962 0.935 1.067 2008-Jul-25 04:08:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2008-Jul-25 04:08:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:08:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:08:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 04:08:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:08:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2008-Jul-25 04:08:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:08:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2008-Jul-25 04:08:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:08:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 04:09:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:09:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:09:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:09:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2008-Jul-25 04:09:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:09:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 04:09:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:09:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:09:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:09:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:09:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:09:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2008-Jul-25 04:09:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 04:09:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2008-Jul-25 04:09:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 04:09:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:09:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2008-Jul-25 04:09:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2008-Jul-25 04:09:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2008-Jul-25 04:09:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 04:09:40 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 0.953 1.070 2008-Jul-25 04:09:40 LOG4 check_wapp_levels: WAPP-2 power levels: 0.070 0.014 0.014 0.038 2008-Jul-25 04:09:40 LOG4 check_wapp_levels: WAPP-3 power levels: 0.108 0.014 0.026 0.014 2008-Jul-25 04:09:40 LOG4 check_wapp_levels: WAPP-4 power levels: 1.075 0.963 0.935 1.069 2008-Jul-25 04:09:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2008-Jul-25 04:09:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:09:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:09:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.079 (still bad) 2008-Jul-25 04:09:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:09:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:09:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2008-Jul-25 04:09:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:09:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:10:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.078 (still bad) 2008-Jul-25 04:10:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:10:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:10:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2008-Jul-25 04:10:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:10:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:10:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.078 (still bad) 2008-Jul-25 04:10:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:10:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:10:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:10:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:10:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:10:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.078 (still bad) 2008-Jul-25 04:10:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2008-Jul-25 04:10:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:10:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2008-Jul-25 04:10:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:10:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:10:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.079 (still bad) 2008-Jul-25 04:10:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:10:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:10:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 04:10:42 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 0.955 1.071 2008-Jul-25 04:10:42 LOG4 check_wapp_levels: WAPP-2 power levels: 0.071 0.014 0.014 0.038 2008-Jul-25 04:10:42 LOG4 check_wapp_levels: WAPP-3 power levels: 0.108 0.014 0.026 0.014 2008-Jul-25 04:10:42 LOG4 check_wapp_levels: WAPP-4 power levels: 1.076 0.963 0.938 1.069 2008-Jul-25 04:10:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:10:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:10:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.080 (still bad) 2008-Jul-25 04:10:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:10:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:10:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2008-Jul-25 04:10:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:10:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:11:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.079 (still bad) 2008-Jul-25 04:11:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:11:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:11:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:11:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2008-Jul-25 04:11:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:11:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.078 (still bad) 2008-Jul-25 04:11:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2008-Jul-25 04:11:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:11:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2008-Jul-25 04:11:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2008-Jul-25 04:11:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:11:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 04:11:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2008-Jul-25 04:11:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:11:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:11:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2008-Jul-25 04:11:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:11:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2008-Jul-25 04:11:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2008-Jul-25 04:11:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2008-Jul-25 04:11:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 04:11:43 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 0.954 1.070 2008-Jul-25 04:11:43 LOG4 check_wapp_levels: WAPP-2 power levels: 0.070 0.014 0.014 0.038 2008-Jul-25 04:11:43 LOG4 check_wapp_levels: WAPP-3 power levels: 0.108 0.014 0.026 0.014 2008-Jul-25 04:11:43 LOG4 check_wapp_levels: WAPP-4 power levels: 1.072 0.960 0.935 1.065 2008-Jul-25 04:11:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2008-Jul-25 04:11:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:11:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:11:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2008-Jul-25 04:11:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:11:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:11:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2008-Jul-25 04:11:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:12:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:12:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2008-Jul-25 04:12:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2008-Jul-25 04:12:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:12:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:12:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:12:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2008-Jul-25 04:12:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:12:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2008-Jul-25 04:12:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2008-Jul-25 04:12:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:12:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 04:12:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2008-Jul-25 04:12:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:12:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2008-Jul-25 04:12:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.080 (still bad) 2008-Jul-25 04:12:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2008-Jul-25 04:12:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2008-Jul-25 04:12:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2008-Jul-25 04:12:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2008-Jul-25 04:12:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2008-Jul-25 04:12:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 04:12:44 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 0.956 1.070 2008-Jul-25 04:12:44 LOG4 check_wapp_levels: WAPP-2 power levels: 0.070 0.014 0.014 0.038 2008-Jul-25 04:12:44 LOG4 check_wapp_levels: WAPP-3 power levels: 0.107 0.014 0.026 0.014 2008-Jul-25 04:12:44 LOG4 check_wapp_levels: WAPP-4 power levels: 1.087 0.975 0.948 1.083 2008-Jul-25 04:12:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2008-Jul-25 04:12:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.079 (still bad) 2008-Jul-25 04:12:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 04:12:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:12:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:12:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2008-Jul-25 04:12:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2008-Jul-25 04:13:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2008-Jul-25 04:13:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2008-Jul-25 04:13:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2008-Jul-25 04:13:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-25 04:13:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2008-Jul-25 04:13:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2008-Jul-25 04:13:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2008-Jul-25 04:13:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2008-Jul-25 04:13:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 04:13:18 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 04:13:18.294 (seconds: 15198.294)!} 2008-Jul-25 04:13:18 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 04:13:18.294 (seconds: 15198.294)! 2008-Jul-25 04:13:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:13:19 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 15197.0 to 15198.0! 2008-Jul-25 04:13:20 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (15197.0 - 15199.0)! 2008-Jul-25 04:13:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2008-Jul-25 04:13:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2008-Jul-25 04:13:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2008-Jul-25 04:13:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2008-Jul-25 04:13:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2008-Jul-25 04:13:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2008-Jul-25 04:13:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2008-Jul-25 04:13:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2008-Jul-25 04:13:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2008-Jul-25 04:13:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:13:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2008-Jul-25 04:13:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:13:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 04:13:45 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 0.953 1.066 2008-Jul-25 04:13:45 LOG4 check_wapp_levels: WAPP-2 power levels: 0.070 0.014 0.014 0.038 2008-Jul-25 04:13:45 LOG4 check_wapp_levels: WAPP-3 power levels: 0.107 0.014 0.026 0.014 2008-Jul-25 04:13:45 LOG4 check_wapp_levels: WAPP-4 power levels: 1.071 0.961 0.933 1.066 2008-Jul-25 04:13:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:13:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.078 (still bad) 2008-Jul-25 04:13:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:13:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2008-Jul-25 04:13:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:13:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:13:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:14:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.079 (still bad) 2008-Jul-25 04:14:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2008-Jul-25 04:14:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2008-Jul-25 04:14:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:14:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2008-Jul-25 04:14:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2008-Jul-25 04:14:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2008-Jul-25 04:14:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2008-Jul-25 04:14:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2008-Jul-25 04:14:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:14:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:14:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:14:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.080 (still bad) 2008-Jul-25 04:14:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:14:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:14:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2008-Jul-25 04:14:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:14:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2008-Jul-25 04:14:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2008-Jul-25 04:14:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:14:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:14:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2008-Jul-25 04:14:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:14:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 04:14:47 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 0.954 1.069 2008-Jul-25 04:14:47 LOG4 check_wapp_levels: WAPP-2 power levels: 0.070 0.014 0.014 0.039 2008-Jul-25 04:14:47 LOG4 check_wapp_levels: WAPP-3 power levels: 0.108 0.014 0.026 0.014 2008-Jul-25 04:14:47 LOG4 check_wapp_levels: WAPP-4 power levels: 1.076 0.961 0.936 1.068 2008-Jul-25 04:14:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 04:14:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:14:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:14:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:14:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:14:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:15:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2008-Jul-25 04:15:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:15:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2008-Jul-25 04:15:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2008-Jul-25 04:15:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 04:15:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 04:15:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2008-Jul-25 04:15:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 04:15:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2008-Jul-25 04:15:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 04:15:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:15:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2008-Jul-25 04:15:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.079 (still bad) 2008-Jul-25 04:15:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 04:15:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 04:15:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.078 (still bad) 2008-Jul-25 04:15:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2008-Jul-25 04:15:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2008-Jul-25 04:15:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.078 (still bad) 2008-Jul-25 04:15:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2008-Jul-25 04:15:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:15:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 04:15:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:15:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 04:15:48 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 0.962 1.077 2008-Jul-25 04:15:48 LOG4 check_wapp_levels: WAPP-2 power levels: 0.072 0.014 0.014 0.042 2008-Jul-25 04:15:48 LOG4 check_wapp_levels: WAPP-3 power levels: 0.109 0.014 0.026 0.014 2008-Jul-25 04:15:48 LOG4 check_wapp_levels: WAPP-4 power levels: 1.075 0.961 0.937 1.067 2008-Jul-25 04:15:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.078 (still bad) 2008-Jul-25 04:15:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 04:15:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2008-Jul-25 04:15:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 04:15:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2008-Jul-25 04:16:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 04:16:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2008-Jul-25 04:16:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2008-Jul-25 04:16:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 04:16:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2008-Jul-25 04:16:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2008-Jul-25 04:16:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 04:16:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.078 (still bad) 2008-Jul-25 04:16:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 04:16:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 04:16:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2008-Jul-25 04:16:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2008-Jul-25 04:16:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.080 (still bad) 2008-Jul-25 04:16:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2008-Jul-25 04:16:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:16:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 04:16:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:16:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:16:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2008-Jul-25 04:16:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2008-Jul-25 04:16:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2008-Jul-25 04:16:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2008-Jul-25 04:16:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:16:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:16:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 04:16:49 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 0.954 1.072 2008-Jul-25 04:16:49 LOG4 check_wapp_levels: WAPP-2 power levels: 0.071 0.014 0.014 0.040 2008-Jul-25 04:16:49 LOG4 check_wapp_levels: WAPP-3 power levels: 0.110 0.014 0.026 0.014 2008-Jul-25 04:16:49 LOG4 check_wapp_levels: WAPP-4 power levels: 1.078 0.965 0.941 1.073 2008-Jul-25 04:16:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2008-Jul-25 04:16:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:16:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2008-Jul-25 04:16:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:16:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2008-Jul-25 04:17:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.080 (still bad) 2008-Jul-25 04:17:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 04:17:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2008-Jul-25 04:17:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 04:17:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:17:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:17:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.079 (still bad) 2008-Jul-25 04:17:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2008-Jul-25 04:17:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:17:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 04:17:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:17:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:17:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.079 (still bad) 2008-Jul-25 04:17:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2008-Jul-25 04:17:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:17:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 04:17:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:17:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:17:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 04:17:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:17:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:17:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:17:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2008-Jul-25 04:17:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2008-Jul-25 04:17:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 04:17:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 04:17:51 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 0.954 1.068 2008-Jul-25 04:17:51 LOG4 check_wapp_levels: WAPP-2 power levels: 0.070 0.014 0.014 0.038 2008-Jul-25 04:17:51 LOG4 check_wapp_levels: WAPP-3 power levels: 0.108 0.014 0.026 0.014 2008-Jul-25 04:17:51 LOG4 check_wapp_levels: WAPP-4 power levels: 1.074 0.960 0.937 1.067 2008-Jul-25 04:17:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:17:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:17:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:17:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:18:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.078 (still bad) 2008-Jul-25 04:18:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:18:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:18:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:18:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:18:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:18:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2008-Jul-25 04:18:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2008-Jul-25 04:18:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2008-Jul-25 04:18:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:18:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2008-Jul-25 04:18:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:18:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:18:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2008-Jul-25 04:18:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:18:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2008-Jul-25 04:18:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2008-Jul-25 04:18:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 04:18:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:18:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:18:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:18:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:18:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:18:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2008-Jul-25 04:18:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:18:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 04:18:52 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 0.952 1.067 2008-Jul-25 04:18:52 LOG4 check_wapp_levels: WAPP-2 power levels: 0.070 0.014 0.014 0.038 2008-Jul-25 04:18:52 LOG4 check_wapp_levels: WAPP-3 power levels: 0.108 0.014 0.026 0.014 2008-Jul-25 04:18:52 LOG4 check_wapp_levels: WAPP-4 power levels: 1.072 0.960 0.935 1.065 2008-Jul-25 04:18:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:18:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:18:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:19:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 04:19:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:19:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:19:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:19:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2008-Jul-25 04:19:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2008-Jul-25 04:19:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:19:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.079 (still bad) 2008-Jul-25 04:19:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:19:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2008-Jul-25 04:19:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:19:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:19:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:19:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.080 (still bad) 2008-Jul-25 04:19:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 04:19:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:19:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.078 (still bad) 2008-Jul-25 04:19:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2008-Jul-25 04:19:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2008-Jul-25 04:19:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2008-Jul-25 04:19:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:19:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 04:19:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2008-Jul-25 04:19:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 04:19:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2008-Jul-25 04:19:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 04:19:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 04:19:53 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 0.955 1.068 2008-Jul-25 04:19:53 LOG4 check_wapp_levels: WAPP-2 power levels: 0.070 0.014 0.014 0.038 2008-Jul-25 04:19:53 LOG4 check_wapp_levels: WAPP-3 power levels: 0.108 0.014 0.026 0.014 2008-Jul-25 04:19:53 LOG4 check_wapp_levels: WAPP-4 power levels: 1.076 0.961 0.937 1.067 2008-Jul-25 04:19:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 04:19:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2008-Jul-25 04:19:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2008-Jul-25 04:20:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2008-Jul-25 04:20:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 04:20:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 04:20:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.078 (still bad) 2008-Jul-25 04:20:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2008-Jul-25 04:20:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2008-Jul-25 04:20:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2008-Jul-25 04:20:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 04:20:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2008-Jul-25 04:20:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.078 (still bad) 2008-Jul-25 04:20:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 04:20:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.078 (still bad) 2008-Jul-25 04:20:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2008-Jul-25 04:20:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.078 (still bad) 2008-Jul-25 04:20:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2008-Jul-25 04:20:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.079 (still bad) 2008-Jul-25 04:20:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2008-Jul-25 04:20:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.078 (still bad) 2008-Jul-25 04:20:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2008-Jul-25 04:20:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 04:20:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2008-Jul-25 04:20:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.080 (still bad) 2008-Jul-25 04:20:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2008-Jul-25 04:20:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 04:20:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2008-Jul-25 04:20:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 04:20:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 04:20:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 04:20:55 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 0.956 1.069 2008-Jul-25 04:20:55 LOG4 check_wapp_levels: WAPP-2 power levels: 0.071 0.014 0.014 0.039 2008-Jul-25 04:20:55 LOG4 check_wapp_levels: WAPP-3 power levels: 0.110 0.014 0.026 0.014 2008-Jul-25 04:20:55 LOG4 check_wapp_levels: WAPP-4 power levels: 1.079 0.964 0.940 1.070 2008-Jul-25 04:20:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2008-Jul-25 04:20:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2008-Jul-25 04:21:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2008-Jul-25 04:21:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2008-Jul-25 04:21:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 04:21:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.079 (still bad) 2008-Jul-25 04:21:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 04:21:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2008-Jul-25 04:21:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2008-Jul-25 04:21:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 04:21:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2008-Jul-25 04:21:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2008-Jul-25 04:21:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 04:21:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.078 (still bad) 2008-Jul-25 04:21:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.078 (still bad) 2008-Jul-25 04:21:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.078 (still bad) 2008-Jul-25 04:21:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.079 (still bad) 2008-Jul-25 04:21:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.078 (still bad) 2008-Jul-25 04:21:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 04:21:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.078 (still bad) 2008-Jul-25 04:21:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.078 (still bad) 2008-Jul-25 04:21:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2008-Jul-25 04:21:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2008-Jul-25 04:21:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2008-Jul-25 04:21:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2008-Jul-25 04:21:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2008-Jul-25 04:21:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2008-Jul-25 04:21:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2008-Jul-25 04:21:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 04:21:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 04:21:56 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 0.955 1.069 2008-Jul-25 04:21:56 LOG4 check_wapp_levels: WAPP-2 power levels: 0.070 0.014 0.014 0.038 2008-Jul-25 04:21:56 LOG4 check_wapp_levels: WAPP-3 power levels: 0.108 0.014 0.026 0.014 2008-Jul-25 04:21:56 LOG4 check_wapp_levels: WAPP-4 power levels: 1.077 0.962 0.937 1.068 2008-Jul-25 04:21:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 04:22:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2008-Jul-25 04:22:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.078 (still bad) 2008-Jul-25 04:22:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 04:22:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2008-Jul-25 04:22:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2008-Jul-25 04:22:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2008-Jul-25 04:22:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.078 (still bad) 2008-Jul-25 04:22:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2008-Jul-25 04:22:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 04:22:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 04:22:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 04:22:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2008-Jul-25 04:22:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 04:22:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 04:22:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 04:22:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 04:22:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 04:22:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 04:22:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2008-Jul-25 04:22:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2008-Jul-25 04:22:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2008-Jul-25 04:22:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2008-Jul-25 04:22:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 04:22:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2008-Jul-25 04:22:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.078 (still bad) 2008-Jul-25 04:22:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.078 (still bad) 2008-Jul-25 04:22:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jul-25 04:22:52 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jul-25 04:22:52 LOG5 end_task: Level: (4) ID = <10223> Status = 0 0 0 0 ok 2008-Jul-25 04:22:52 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jul-25 04:22:52 LOG5 end_task: Level: (3) ID = <10222> Status = 0 0 0 0 ok 2008-Jul-25 04:22:52 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Jul-25 04:22:52 LOG5 finish_task: Level: (2) ID = <10190> Status = 0 0 0 0 ok 2008-Jul-25 04:22:52 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Jul-25 04:22:52 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Jul-25 04:22:52 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Jul-25 04:22:52 LOG5 end_task: Level: (2) ID = <10190> Status = 0 0 0 0 ok 2008-Jul-25 04:22:52 COMMAND run_command_line: EXECUTING command 47: 'ENDIF' 2008-Jul-25 04:22:52 NOTE run_command_file: DONE with command file processing 2008-Jul-25 04:22:52 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2008-Jul-25 04:22:52 STOP finish_task: Finishing task 'running command file '080725_obs.cmd'' 2008-Jul-25 04:22:52 LOG5 finish_task: Level: (1) ID = <10077> Status = 0 0 0 0 ok 2008-Jul-25 04:22:52 DONE finish_task: DONE finished running: command file '080725_obs.cmd' 2008-Jul-25 04:22:52 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Jul-25 04:22:52 END end_task: Finishing task 'running command file '080725_obs.cmd'' with status 'OK' 2008-Jul-25 04:22:52 LOG5 end_task: Level: (1) ID = <10077> Status = 0 0 0 0 ok 2008-Jul-25 04:22:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2008-Jul-25 04:23:33 INFO1 CIMA-run_command_file: Transferring command file 'command_galfacurpos.cmd ' to executive ... 2008-Jul-25 04:23:33 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 7 {LOAD togs_ages.conf} 2008-Jul-25 04:23:33 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 8 {TRACKCURPOS} 2008-Jul-25 04:23:33 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 9 {ALFAANGLE 19} 2008-Jul-25 04:23:33 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 13 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2008-Jul-25 04:23:33 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-Jul-25 04:23:33 LOG4 exec_msg: From OBSERVER: run_command_file command_galfacurpos.cmd 1 1 4 2008-Jul-25 04:23:33 LOG4 run_command_file: Calling 'run_command_file command_galfacurpos.cmd 1 1 4' 2008-Jul-25 04:23:33 BEGIN begin_task: Starting task 'running command file 'command_galfacurpos.cmd'' 2008-Jul-25 04:23:33 LOG5 begin_task: Level: (1) ID = <10224> Status = 0 0 0 0 ok 2008-Jul-25 04:23:33 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfacurpos.cmd' ...} 2008-Jul-25 04:23:33 NOTE run_command_file: Starting execution of command file 'command_galfacurpos.cmd' from line 1 2008-Jul-25 04:23:33 COMMAND run_command_line: EXECUTING command 7: 'LOAD togs_ages.conf' 2008-Jul-25 04:23:33 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2008-Jul-25 04:23:33 NOTE CIMA-check_config_file: File 'togs_ages.conf' contains a observing mode set-up which will be ignored! 2008-Jul-25 04:23:34 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Jul-25 04:23:34 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2008-Jul-25 04:23:34 NOTE CIMA-load_config_file: Loading configuration file 'togs_ages.conf' 2008-Jul-25 04:23:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Jul-25 04:23:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Jul-25 04:23:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Jul-25 04:23:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Jul-25 04:23:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Jul-25 04:23:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2008-Jul-25 04:23:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Jul-25 04:23:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1381.2" 2008-Jul-25 04:23:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1381.2" 2008-Jul-25 04:23:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1381.2" 2008-Jul-25 04:23:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1381.2" 2008-Jul-25 04:23:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1381.2" 2008-Jul-25 04:23:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1381.2" 2008-Jul-25 04:23:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1381.2" 2008-Jul-25 04:23:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1381.2" 2008-Jul-25 04:23:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1381.2" 2008-Jul-25 04:23:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Jul-25 04:23:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Jul-25 04:23:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Jul-25 04:23:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Jul-25 04:23:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Jul-25 04:23:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Jul-25 04:23:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Jul-25 04:23:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Jul-25 04:23:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Jul-25 04:23:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Jul-25 04:23:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Jul-25 04:23:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Jul-25 04:23:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Jul-25 04:23:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2008-Jul-25 04:23:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Jul-25 04:23:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Jul-25 04:23:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Jul-25 04:23:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Jul-25 04:23:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Jul-25 04:23:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Jul-25 04:23:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Jul-25 04:23:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Jul-25 04:23:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Jul-25 04:23:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1631.200000" 2008-Jul-25 04:23:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Jul-25 04:23:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Jul-25 04:23:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Jul-25 04:23:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Jul-25 04:23:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Jul-25 04:23:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Jul-25 04:23:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Jul-25 04:23:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Jul-25 04:23:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Jul-25 04:23:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Jul-25 04:23:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Jul-25 04:23:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Jul-25 04:23:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Jul-25 04:23:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Jul-25 04:23:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Jul-25 04:23:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Jul-25 04:23:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Jul-25 04:23:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Jul-25 04:23:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Jul-25 04:23:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Jul-25 04:23:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Jul-25 04:23:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Jul-25 04:23:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Jul-25 04:23:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Jul-25 04:23:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Jul-25 04:23:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Jul-25 04:23:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Jul-25 04:23:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Jul-25 04:23:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Jul-25 04:23:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Jul-25 04:23:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Jul-25 04:23:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Jul-25 04:23:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Jul-25 04:23:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Jul-25 04:23:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Jul-25 04:23:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Jul-25 04:23:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Jul-25 04:23:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Jul-25 04:23:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Jul-25 04:23:36 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Jul-25 04:23:36 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Jul-25 04:23:36 LOG5 begin_task: Level: (2) ID = <10225> Status = 0 0 0 0 ok 2008-Jul-25 04:23:36 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Jul-25 04:23:36 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Jul-25 04:23:36 LOG1 config_iflo: Receiver ALFA already selected 2008-Jul-25 04:23:36 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jul-25 04:23:36 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Jul-25 04:23:36 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jul-25 04:23:36 LOG5 begin_task: Level: (3) ID = <10226> Status = 0 0 0 0 ok 2008-Jul-25 04:23:36 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jul-25 04:23:36 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jul-25 04:23:36 LOG5 end_task: Level: (3) ID = <10226> Status = 0 0 0 0 ok 2008-Jul-25 04:23:36 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jul-25 04:23:36 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Jul-25 04:23:36 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2008-Jul-25 04:23:36 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2008-Jul-25 04:23:36 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Jul-25 04:23:36 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Jul-25 04:23:36 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2008-Jul-25 04:23:36 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2008-Jul-25 04:23:36 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2008-Jul-25 04:23:36 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2008-Jul-25 04:23:36 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2008-Jul-25 04:23:36 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2008-Jul-25 04:23:36 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Jul-25 04:23:36 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Jul-25 04:23:36 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Jul-25 04:23:36 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Jul-25 04:23:36 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Jul-25 04:23:36 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2008-Jul-25 04:23:36 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2008-Jul-25 04:23:36 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2008-Jul-25 04:23:36 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2008-Jul-25 04:23:36 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Jul-25 04:23:36 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2008-Jul-25 04:23:36 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2008-Jul-25 04:23:36 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Jul-25 04:23:36 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 04:23:36 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2008-Jul-25 04:23:36 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2008-Jul-25 04:23:36 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Jul-25 04:23:36 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2008-Jul-25 04:23:36 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2008-Jul-25 04:23:36 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Jul-25 04:23:36 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jul-25 04:23:36 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Jul-25 04:23:36 LOG5 begin_task: Level: (3) ID = <10227> Status = 0 0 0 0 ok 2008-Jul-25 04:23:36 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2008-Jul-25 04:23:36 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Jul-25 04:23:36 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 04:23:36 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jul-25 04:23:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:23:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:23:38 LOG4 got_cormsg: From DATATAKING: vw% DONE 2008-Jul-25 04:23:38 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Jul-25 04:23:38 LOG5 end_task: Level: (3) ID = <10227> Status = 0 0 0 0 ok 2008-Jul-25 04:23:38 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Jul-25 04:23:38 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Jul-25 04:23:38 LOG5 finish_task: Level: (2) ID = <10225> Status = 0 0 0 0 ok 2008-Jul-25 04:23:38 DONE finish_task: DONE finished configuration: IF/LO path 2008-Jul-25 04:23:38 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Jul-25 04:23:38 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Jul-25 04:23:38 LOG5 end_task: Level: (2) ID = <10225> Status = 0 0 0 0 ok 2008-Jul-25 04:23:38 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Jul-25 04:23:38 LOG5 begin_task: Level: (2) ID = <10228> Status = 0 0 0 0 ok 2008-Jul-25 04:23:38 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Jul-25 04:23:38 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Jul-25 04:23:38 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2008-Jul-25 04:23:38 START begin_task: Starting task 'selecting calibration port' 2008-Jul-25 04:23:38 LOG5 begin_task: Level: (3) ID = <10229> Status = 0 0 0 0 ok 2008-Jul-25 04:23:38 LOG3 vw_send: To DATATAKING: calport 3 2008-Jul-25 04:23:38 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Jul-25 04:23:38 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jul-25 04:23:38 START begin_task: Starting task 'waiting on calport' 2008-Jul-25 04:23:38 LOG5 begin_task: Level: (4) ID = <10230> Status = 0 0 0 0 ok 2008-Jul-25 04:23:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:23:38 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Jul-25 04:23:38 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jul-25 04:23:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:23:38 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jul-25 04:23:38 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Jul-25 04:23:38 LOG5 end_task: Level: (4) ID = <10230> Status = 0 0 0 0 ok 2008-Jul-25 04:23:38 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Jul-25 04:23:38 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Jul-25 04:23:38 LOG5 end_task: Level: (3) ID = <10229> Status = 0 0 0 0 ok 2008-Jul-25 04:23:38 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Jul-25 04:23:38 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Jul-25 04:23:38 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jul-25 04:23:38 LOG5 begin_task: Level: (3) ID = <10231> Status = 0 0 0 0 ok 2008-Jul-25 04:23:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:23:38 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jul-25 04:23:38 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jul-25 04:23:38 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jul-25 04:23:38 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jul-25 04:23:38 LOG5 end_task: Level: (3) ID = <10231> Status = 0 0 0 0 ok 2008-Jul-25 04:23:38 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Jul-25 04:23:38 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Jul-25 04:23:38 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Jul-25 04:23:39 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Jul-25 04:23:39 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Jul-25 04:23:39 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Jul-25 04:23:39 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Jul-25 04:23:39 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Jul-25 04:23:39 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 JID 2008-Jul-25 04:23:39 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 JID 2008-Jul-25 04:23:39 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 JID 2008-Jul-25 04:23:39 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 JID 2008-Jul-25 04:23:39 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Jul-25 04:23:39 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Jul-25 04:23:39 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jul-25 04:23:39 LOG5 begin_task: Level: (3) ID = <10232> Status = 0 0 0 0 ok 2008-Jul-25 04:23:39 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Jul-25 04:23:39 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jul-25 04:23:39 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Jul-25 04:23:39 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jul-25 04:23:39 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 JID' 2008-Jul-25 04:23:39 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jul-25 04:23:39 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jul-25 04:23:39 LOG5 end_task: Level: (3) ID = <10232> Status = 0 0 0 0 ok 2008-Jul-25 04:23:39 LOG3 sock_errsend: To WAPPDATA: FLUSH 2008-Jul-25 04:23:39 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Jul-25 04:23:39 LOG5 finish_task: Level: (2) ID = <10228> Status = 0 0 0 0 ok 2008-Jul-25 04:23:39 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Jul-25 04:23:39 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Jul-25 04:23:39 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Jul-25 04:23:39 LOG5 end_task: Level: (2) ID = <10228> Status = 0 0 0 0 ok 2008-Jul-25 04:23:39 COMMAND run_command_line: EXECUTING command 8: 'TRACKCURPOS' 2008-Jul-25 04:23:39 BEGIN begin_task: Starting task 'tracking current position' 2008-Jul-25 04:23:39 LOG5 begin_task: Level: (2) ID = <10233> Status = 0 0 0 0 ok 2008-Jul-25 04:23:39 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Current Position} INFO {Tracking current position ...} 2008-Jul-25 04:23:39 INFO1 track_current_pos: Starting to track the current commanded position RA = 23:10:50.3 and Dec = +15:33:26.6 2008-Jul-25 04:23:39 LOG3 track_source: Calling 'track_source Cur-pos 231050.3 153326.6 J 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2008-Jul-25 04:23:39 START begin_task: Starting task 'sending tracking commands' 2008-Jul-25 04:23:39 LOG5 begin_task: Level: (3) ID = <10234> Status = 0 0 0 0 ok 2008-Jul-25 04:23:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {Cur-pos} INFO {Slewing to source 'Cur-pos' ...} 2008-Jul-25 04:23:39 INFO1 track_source: Starting to track Cur-pos 2008-Jul-25 04:23:39 LOG3 vw_send: To DATATAKING: hdrldsrcnm "Cur-pos" 2008-Jul-25 04:23:39 LOG3 vw_send: To DATATAKING: set ra 231050.3 2008-Jul-25 04:23:39 LOG3 vw_send: To DATATAKING: set dec 153326.6 2008-Jul-25 04:23:39 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Jul-25 04:23:39 LOG3 vw_send: To DATATAKING: pnt tr 231050.3 153326.6 -CJ 2008-Jul-25 04:23:39 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Jul-25 04:23:39 STOP finish_task: Finishing task 'sending tracking commands' 2008-Jul-25 04:23:39 LOG5 finish_task: Level: (3) ID = <10234> Status = 0 0 0 0 ok 2008-Jul-25 04:23:39 INFO2 finish_task: DONE finished sending: tracking commands 2008-Jul-25 04:23:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-25 04:23:39 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Jul-25 04:23:39 LOG5 end_task: Level: (3) ID = <10234> Status = 0 0 0 0 ok 2008-Jul-25 04:23:39 START begin_task: Starting task 'waiting on telescope' 2008-Jul-25 04:23:39 LOG5 begin_task: Level: (3) ID = <10235> Status = 0 0 0 0 ok 2008-Jul-25 04:23:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Jul-25 04:23:39 LOG3 waittrk: Start waittrk 5 2008-Jul-25 04:23:39 START begin_task: Starting task 'waiting on telescope movement' 2008-Jul-25 04:23:39 LOG5 begin_task: Level: (4) ID = <10236> Status = 0 0 0 0 ok 2008-Jul-25 04:23:39 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Jul-25 04:23:39 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "Cur-pos" 2008-Jul-25 04:23:39 LOG4 got_cormsg: From DATATAKING: set ra 231050.3 2008-Jul-25 04:23:39 LOG4 got_cormsg: From DATATAKING: set dec 153326.6 2008-Jul-25 04:23:39 LOG4 got_cormsg: From DATATAKING: vw% 231050.3 2008-Jul-25 04:23:39 LOG4 got_cormsg: From DATATAKING: vw% 153326.6 2008-Jul-25 04:23:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:23:39 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Jul-25 04:23:39 LOG4 got_cormsg: From DATATAKING: pnt tr 231050.3 153326.6 -CJ 2008-Jul-25 04:23:39 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Jul-25 04:23:39 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Jul-25 04:23:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:23:44 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Jul-25 04:23:44 LOG5 end_task: Level: (4) ID = <10236> Status = 0 0 0 0 ok 2008-Jul-25 04:23:44 START begin_task: Starting task 'waiting on telescope on source' 2008-Jul-25 04:23:44 LOG5 begin_task: Level: (4) ID = <10237> Status = 0 0 0 0 ok 2008-Jul-25 04:23:49 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Jul-25 04:23:49 LOG5 end_task: Level: (4) ID = <10237> Status = 0 0 0 0 ok 2008-Jul-25 04:23:49 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Jul-25 04:23:49 INFO2 waittrk: Now tracking Cur-pos 2008-Jul-25 04:23:49 LOG4 waittrk: Current telescope position: Az = 441.02 ZA = 14.41 2008-Jul-25 04:23:49 STOP finish_task: Finishing task 'waiting on telescope' 2008-Jul-25 04:23:49 LOG5 finish_task: Level: (3) ID = <10235> Status = 0 0 0 0 ok 2008-Jul-25 04:23:49 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Jul-25 04:23:49 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-25 04:23:49 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Jul-25 04:23:49 LOG5 end_task: Level: (3) ID = <10235> Status = 0 0 0 0 ok 2008-Jul-25 04:23:49 STOP finish_task: Finishing task 'tracking current position' 2008-Jul-25 04:23:49 LOG5 finish_task: Level: (2) ID = <10233> Status = 0 0 0 0 ok 2008-Jul-25 04:23:49 DONE finish_task: DONE finished tracking: current position 2008-Jul-25 04:23:49 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Jul-25 04:23:49 END end_task: Finishing task 'tracking current position' with status 'OK' 2008-Jul-25 04:23:49 LOG5 end_task: Level: (2) ID = <10233> Status = 0 0 0 0 ok 2008-Jul-25 04:23:49 COMMAND run_command_line: EXECUTING command 9: 'ALFAANGLE 19' 2008-Jul-25 04:23:49 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2008-Jul-25 04:23:49 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Jul-25 04:23:49 LOG5 begin_task: Level: (2) ID = <10238> Status = 0 0 0 0 ok 2008-Jul-25 04:23:49 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Jul-25 04:23:49 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Jul-25 04:23:49 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-Jul-25 04:23:49 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Jul-25 04:23:49 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Jul-25 04:23:49 LOG5 begin_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2008-Jul-25 04:24:31 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Jul-25 04:24:31 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Jul-25 04:24:31 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Jul-25 04:24:31 LOG5 end_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2008-Jul-25 04:24:31 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Jul-25 04:24:31 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Jul-25 04:24:31 LOG5 finish_task: Level: (2) ID = <10238> Status = 0 0 0 0 ok 2008-Jul-25 04:24:31 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Jul-25 04:24:31 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Jul-25 04:24:31 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Jul-25 04:24:31 LOG5 end_task: Level: (2) ID = <10238> Status = 0 0 0 0 ok 2008-Jul-25 04:24:31 COMMAND run_command_line: EXECUTING command 13: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2008-Jul-25 04:24:31 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2008-Jul-25 04:24:31 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Jul-25 04:24:31 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first 0 {1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2008-Jul-25 04:24:32 BEGIN begin_task: Starting task 'smart frequency switching' 2008-Jul-25 04:24:32 LOG5 begin_task: Level: (2) ID = <10240> Status = 0 0 0 0 ok 2008-Jul-25 04:24:32 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'Cur-pos' 2008-Jul-25 04:24:32 INFO1 smartfreq: Starting pattern: Smart frequency switching 2008-Jul-25 04:24:32 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2008-Jul-25 04:24:32 START begin_task: Starting task 'selecting calibration type' 2008-Jul-25 04:24:32 LOG5 begin_task: Level: (3) ID = <10241> Status = 0 0 0 0 ok 2008-Jul-25 04:24:32 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Jul-25 04:24:32 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Jul-25 04:24:32 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jul-25 04:24:32 START begin_task: Starting task 'waiting on setcal' 2008-Jul-25 04:24:32 LOG5 begin_task: Level: (4) ID = <10242> Status = 0 0 0 0 ok 2008-Jul-25 04:24:32 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Jul-25 04:24:32 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jul-25 04:24:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:24:32 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jul-25 04:24:32 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Jul-25 04:24:32 LOG5 end_task: Level: (4) ID = <10242> Status = 0 0 0 0 ok 2008-Jul-25 04:24:32 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Jul-25 04:24:32 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jul-25 04:24:32 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Jul-25 04:24:32 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jul-25 04:24:32 LOG5 begin_task: Level: (4) ID = <10243> Status = 0 0 0 0 ok 2008-Jul-25 04:24:32 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jul-25 04:24:32 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jul-25 04:24:32 LOG5 end_task: Level: (4) ID = <10243> Status = 0 0 0 0 ok 2008-Jul-25 04:24:32 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jul-25 04:24:32 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Jul-25 04:24:32 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jul-25 04:24:32 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Jul-25 04:24:32 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jul-25 04:24:32 LOG5 begin_task: Level: (4) ID = <10244> Status = 0 0 0 0 ok 2008-Jul-25 04:24:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:24:32 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jul-25 04:24:32 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jul-25 04:24:32 LOG5 end_task: Level: (4) ID = <10244> Status = 0 0 0 0 ok 2008-Jul-25 04:24:32 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jul-25 04:24:32 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Jul-25 04:24:32 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Jul-25 04:24:32 LOG5 end_task: Level: (3) ID = <10241> Status = 0 0 0 0 ok 2008-Jul-25 04:24:32 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 JID 2008-Jul-25 04:24:32 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 JID 2008-Jul-25 04:24:32 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 JID 2008-Jul-25 04:24:32 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 JID 2008-Jul-25 04:24:32 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2008-Jul-25 04:24:32 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Jul-25 04:24:32 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2008-Jul-25 04:24:32 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Jul-25 04:24:32 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Jul-25 04:24:32 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jul-25 04:24:32 LOG5 begin_task: Level: (3) ID = <10245> Status = 0 0 0 0 ok 2008-Jul-25 04:24:32 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 JID' 2008-Jul-25 04:24:32 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jul-25 04:24:32 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jul-25 04:24:32 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jul-25 04:24:32 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jul-25 04:24:32 LOG5 end_task: Level: (3) ID = <10245> Status = 0 0 0 0 ok 2008-Jul-25 04:24:32 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2008-Jul-25 04:24:32 START begin_task: Starting task 'adjusting WAPP power' 2008-Jul-25 04:24:32 LOG5 begin_task: Level: (3) ID = <10246> Status = 0 0 0 0 ok 2008-Jul-25 04:24:32 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Jul-25 04:24:32 INFO2 adjust_power: Starting to adjust WAPP power 2008-Jul-25 04:24:32 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Jul-25 04:24:32 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Jul-25 04:24:33 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jul-25 04:24:33 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Jul-25 04:24:33 LOG5 begin_task: Level: (4) ID = <10247> Status = 0 0 0 0 ok 2008-Jul-25 04:24:33 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Jul-25 04:24:33 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jul-25 04:24:33 NOTE WAPPDATA-new_file: New FITS file: wapp.20080725.a2048.0005.fits 2008-Jul-25 04:24:33 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080725.a2048.0005.fits} 2008-Jul-25 04:24:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:24:36 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jul-25 04:24:36 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Jul-25 04:24:36 LOG5 end_task: Level: (4) ID = <10247> Status = 0 0 0 0 ok 2008-Jul-25 04:24:36 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Jul-25 04:24:36 START begin_task: Starting task 'adjusting WAPP power' 2008-Jul-25 04:24:36 LOG5 begin_task: Level: (4) ID = <10248> Status = 0 0 0 0 ok 2008-Jul-25 04:24:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Jul-25 04:24:36 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Jul-25 04:24:36 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Jul-25 04:24:36 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Jul-25 04:24:36 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Jul-25 04:24:36 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Jul-25 04:24:36 LOG5 begin_task: Level: (5) ID = <10249> Status = 0 0 0 0 ok 2008-Jul-25 04:24:36 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Jul-25 04:24:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:24:36 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 0 0 dB --- beam 1: 6 2 dB 2008-Jul-25 04:24:36 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 0 dB --- beam 5: 0 0 dB 2008-Jul-25 04:24:36 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 0 0 dB --- beam 3: 0 0 dB 2008-Jul-25 04:24:36 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 2 dB --- beam 7: 2 2 dB 2008-Jul-25 04:24:36 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Jul-25 04:24:36 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Jul-25 04:24:36 LOG5 end_task: Level: (5) ID = <10249> Status = 0 0 0 0 ok 2008-Jul-25 04:24:36 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.022 0.018 ALFA beam 1: 0.983 0.910 2008-Jul-25 04:24:36 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.070 0.014 ALFA beam 3: 0.014 0.040 2008-Jul-25 04:24:36 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.108 0.014 ALFA beam 5: 0.026 0.014 2008-Jul-25 04:24:36 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.050 0.979 ALFA beam 7: 0.915 1.088 2008-Jul-25 04:24:36 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Jul-25 04:24:36 LOG5 finish_task: Level: (4) ID = <10248> Status = 0 0 0 0 ok 2008-Jul-25 04:24:36 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Jul-25 04:24:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-25 04:24:36 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Jul-25 04:24:36 LOG5 end_task: Level: (4) ID = <10248> Status = 0 0 0 0 ok 2008-Jul-25 04:24:37 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Jul-25 04:24:37 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Jul-25 04:24:37 LOG5 finish_task: Level: (3) ID = <10246> Status = 0 0 0 0 ok 2008-Jul-25 04:24:37 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Jul-25 04:24:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-25 04:24:37 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Jul-25 04:24:37 LOG5 end_task: Level: (3) ID = <10246> Status = 0 0 0 0 ok 2008-Jul-25 04:24:37 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2008-Jul-25 04:24:37 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2008-Jul-25 04:24:37 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2008-Jul-25 04:24:37 LOG5 antvel: Calling 'antvel 231050.300000 153326.600000 J 0' 2008-Jul-25 04:24:37 LOG2 antvel: Precessing RA = 23:10:50.3 Dec = +15:33:26.6 Epoch = 2008.56724 J 2008-Jul-25 04:24:37 LOG2 antvel: Computed apparent RA = 23:11:17.5 Dec = +15:36:18.2 2008-Jul-25 04:24:37 LOG2 antvel: Parameters to Doppler: Topocentric 30276 2008 207 0.0 2008-Jul-25 04:24:37 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Jul-25 04:24:37 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2008-Jul-25 04:24:37 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2008-Jul-25 04:24:37 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jul-25 04:24:37 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jul-25 04:24:37 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Jul-25 04:24:37 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 04:24:37 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Jul-25 04:24:37 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jul-25 04:24:37 LOG5 begin_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2008-Jul-25 04:24:37 LOG5 log_alfabeam: Parameters: 23.180638888888886 15.557388888888891 0.187557 2008.5672381930185 18.999933 2008-Jul-25 04:24:37 LOG4 log_alfabeam: ALFABEAM 0 23.180638888888886 15.557388888888898 2008-Jul-25 04:24:37 LOG4 log_alfabeam: ALFABEAM 1 23.187432467756992 15.597766902469010 2008-Jul-25 04:24:37 LOG4 log_alfabeam: ALFABEAM 2 23.181657487959395 15.649266222286096 2008-Jul-25 04:24:37 LOG4 log_alfabeam: ALFABEAM 3 23.174851718578534 15.609222598455894 2008-Jul-25 04:24:37 LOG4 log_alfabeam: ALFABEAM 4 23.173853162949960 15.516730191760718 2008-Jul-25 04:24:37 LOG4 log_alfabeam: ALFABEAM 5 23.179661186608790 15.465231038357693 2008-Jul-25 04:24:37 LOG4 log_alfabeam: ALFABEAM 6 23.186434605738576 15.506223221137887 2008-Jul-25 04:24:37 INFO2 take_data: Starting WAPP+GALFA scan: 820700017 2008-Jul-25 04:24:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jul-25 04:24:37 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jul-25 04:24:37 LOG5 begin_task: Level: (4) ID = <10251> Status = 0 0 0 0 ok 2008-Jul-25 04:24:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jul-25 04:24:37 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Jul-25 04:24:37 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 04:24:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:24:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:24:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 30278.00 2008-Jul-25 04:24:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jul-25 04:24:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 04:24:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 04:24:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 944.589620 MHz 2008-Jul-25 04:24:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 942.632164 MHz 2008-Jul-25 04:24:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Jul-25 04:24:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Jul-25 04:24:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1978.000000 MHz 2008-Jul-25 04:24:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2008-Jul-25 04:24:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 04:24:39 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 0.983 0.910 2008-Jul-25 04:24:39 LOG4 check_wapp_levels: WAPP-2 power levels: 0.070 0.014 0.014 0.040 2008-Jul-25 04:24:39 LOG4 check_wapp_levels: WAPP-3 power levels: 0.112 0.014 0.026 0.014 2008-Jul-25 04:24:39 LOG4 check_wapp_levels: WAPP-4 power levels: 1.073 0.994 0.935 1.105 2008-Jul-25 04:24:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2008-Jul-25 04:24:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2008-Jul-25 04:24:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2008-Jul-25 04:24:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2008-Jul-25 04:24:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jul-25 04:24:48 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jul-25 04:24:48 LOG5 end_task: Level: (4) ID = <10251> Status = 0 0 0 0 ok 2008-Jul-25 04:24:48 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jul-25 04:24:48 LOG5 end_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2008-Jul-25 04:24:48 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2008-Jul-25 04:24:48 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2008-Jul-25 04:24:48 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2008-Jul-25 04:24:48 LOG5 antvel: Calling 'antvel 231050.300000 153326.600000 J 0' 2008-Jul-25 04:24:48 LOG2 antvel: Precessing RA = 23:10:50.3 Dec = +15:33:26.6 Epoch = 2008.56724 J 2008-Jul-25 04:24:48 LOG2 antvel: Computed apparent RA = 23:11:17.5 Dec = +15:36:18.2 2008-Jul-25 04:24:48 LOG2 antvel: Parameters to Doppler: Topocentric 30288 2008 207 0.0 2008-Jul-25 04:24:48 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Jul-25 04:24:48 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2008-Jul-25 04:24:48 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2008-Jul-25 04:24:48 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jul-25 04:24:48 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jul-25 04:24:48 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Jul-25 04:24:48 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 04:24:48 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Jul-25 04:24:48 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jul-25 04:24:48 LOG5 begin_task: Level: (3) ID = <10252> Status = 0 0 0 0 ok 2008-Jul-25 04:24:48 LOG5 log_alfabeam: Parameters: 23.180638888888886 15.557388888888891 0.190899 2008.5672385732755 18.999933 2008-Jul-25 04:24:48 LOG4 log_alfabeam: ALFABEAM 0 23.180638888888883 15.557388888888905 2008-Jul-25 04:24:48 LOG4 log_alfabeam: ALFABEAM 1 23.187433827140609 15.597719180586587 2008-Jul-25 04:24:48 LOG4 log_alfabeam: ALFABEAM 2 23.181660538174928 15.649259471450673 2008-Jul-25 04:24:48 LOG4 log_alfabeam: ALFABEAM 3 23.174853457424298 15.609262397427170 2008-Jul-25 04:24:48 LOG4 log_alfabeam: ALFABEAM 4 23.173851775644970 15.516778643181608 2008-Jul-25 04:24:48 LOG4 log_alfabeam: ALFABEAM 5 23.179657995411240 15.465238438552104 2008-Jul-25 04:24:48 LOG4 log_alfabeam: ALFABEAM 6 23.186432850779205 15.506181005712977 2008-Jul-25 04:24:48 INFO2 take_data: Starting WAPP+GALFA scan: 820700018 2008-Jul-25 04:24:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jul-25 04:24:49 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jul-25 04:24:49 LOG5 begin_task: Level: (4) ID = <10253> Status = 0 0 0 0 ok 2008-Jul-25 04:24:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jul-25 04:24:49 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Jul-25 04:24:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 04:24:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:24:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:24:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2008-Jul-25 04:24:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 30290.00 2008-Jul-25 04:24:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jul-25 04:24:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 04:24:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 04:24:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 944.589620 MHz 2008-Jul-25 04:24:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 942.632164 MHz 2008-Jul-25 04:24:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Jul-25 04:24:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Jul-25 04:24:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1978.000000 MHz 2008-Jul-25 04:24:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2008-Jul-25 04:24:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2008-Jul-25 04:24:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2008-Jul-25 04:24:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.086 (still bad) 2008-Jul-25 04:24:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2008-Jul-25 04:24:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2008-Jul-25 04:25:00 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jul-25 04:25:00 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jul-25 04:25:00 LOG5 end_task: Level: (4) ID = <10253> Status = 0 0 0 0 ok 2008-Jul-25 04:25:00 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jul-25 04:25:00 LOG5 end_task: Level: (3) ID = <10252> Status = 0 0 0 0 ok 2008-Jul-25 04:25:00 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2008-Jul-25 04:25:00 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2008-Jul-25 04:25:00 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2008-Jul-25 04:25:00 LOG5 antvel: Calling 'antvel 231050.300000 153326.600000 J 0' 2008-Jul-25 04:25:00 LOG2 antvel: Precessing RA = 23:10:50.3 Dec = +15:33:26.6 Epoch = 2008.56724 J 2008-Jul-25 04:25:00 LOG2 antvel: Computed apparent RA = 23:11:17.5 Dec = +15:36:18.2 2008-Jul-25 04:25:00 LOG2 antvel: Parameters to Doppler: Topocentric 30300 2008 207 0.0 2008-Jul-25 04:25:00 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Jul-25 04:25:00 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2008-Jul-25 04:25:00 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2008-Jul-25 04:25:00 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jul-25 04:25:00 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jul-25 04:25:00 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Jul-25 04:25:00 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 04:25:00 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Jul-25 04:25:00 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jul-25 04:25:00 LOG5 begin_task: Level: (3) ID = <10254> Status = 0 0 0 0 ok 2008-Jul-25 04:25:00 LOG5 log_alfabeam: Parameters: 23.180638888888886 15.557388888888891 0.194241 2008.5672389535325 18.999933 2008-Jul-25 04:25:00 LOG4 log_alfabeam: ALFABEAM 0 23.180638888888886 15.557388888888887 2008-Jul-25 04:25:00 LOG4 log_alfabeam: ALFABEAM 1 23.187435173930162 15.597671835846830 2008-Jul-25 04:25:00 LOG4 log_alfabeam: ALFABEAM 2 23.181663563388732 15.649252755227375 2008-Jul-25 04:25:00 LOG4 log_alfabeam: ALFABEAM 3 23.174855183469653 15.609301860317419 2008-Jul-25 04:25:00 LOG4 log_alfabeam: ALFABEAM 4 23.173850401175169 15.516826713395035 2008-Jul-25 04:25:00 LOG4 log_alfabeam: ALFABEAM 5 23.179654830148632 15.465245802625306 2008-Jul-25 04:25:00 LOG4 log_alfabeam: ALFABEAM 6 23.186431108518196 15.506139141737908 2008-Jul-25 04:25:00 INFO2 take_data: Starting WAPP+GALFA scan: 820700019 2008-Jul-25 04:25:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jul-25 04:25:01 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jul-25 04:25:01 LOG5 begin_task: Level: (4) ID = <10255> Status = 0 0 0 0 ok 2008-Jul-25 04:25:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jul-25 04:25:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Jul-25 04:25:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 04:25:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:25:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:25:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 30302.00 2008-Jul-25 04:25:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2008-Jul-25 04:25:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jul-25 04:25:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 04:25:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 04:25:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 944.589620 MHz 2008-Jul-25 04:25:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 942.632164 MHz 2008-Jul-25 04:25:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Jul-25 04:25:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Jul-25 04:25:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1978.000000 MHz 2008-Jul-25 04:25:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2008-Jul-25 04:25:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2008-Jul-25 04:25:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2008-Jul-25 04:25:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2008-Jul-25 04:25:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2008-Jul-25 04:25:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2008-Jul-25 04:25:12 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jul-25 04:25:12 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jul-25 04:25:12 LOG5 end_task: Level: (4) ID = <10255> Status = 0 0 0 0 ok 2008-Jul-25 04:25:12 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jul-25 04:25:12 LOG5 end_task: Level: (3) ID = <10254> Status = 0 0 0 0 ok 2008-Jul-25 04:25:12 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2008-Jul-25 04:25:12 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2008-Jul-25 04:25:12 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2008-Jul-25 04:25:12 LOG5 antvel: Calling 'antvel 231050.300000 153326.600000 J 0' 2008-Jul-25 04:25:12 LOG2 antvel: Precessing RA = 23:10:50.3 Dec = +15:33:26.6 Epoch = 2008.56724 J 2008-Jul-25 04:25:12 LOG2 antvel: Computed apparent RA = 23:11:17.5 Dec = +15:36:18.2 2008-Jul-25 04:25:12 LOG2 antvel: Parameters to Doppler: Topocentric 30312 2008 207 0.0 2008-Jul-25 04:25:12 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Jul-25 04:25:12 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2008-Jul-25 04:25:12 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2008-Jul-25 04:25:12 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jul-25 04:25:12 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jul-25 04:25:12 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Jul-25 04:25:12 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 04:25:12 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Jul-25 04:25:12 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jul-25 04:25:12 LOG5 begin_task: Level: (3) ID = <10256> Status = 0 0 0 0 ok 2008-Jul-25 04:25:12 LOG5 log_alfabeam: Parameters: 23.180638888888886 15.557388888888891 0.197584 2008.5672393337898 18.999933 2008-Jul-25 04:25:12 LOG4 log_alfabeam: ALFABEAM 0 23.180638888888883 15.557388888888889 2008-Jul-25 04:25:12 LOG4 log_alfabeam: ALFABEAM 1 23.187436508664870 15.597624850847339 2008-Jul-25 04:25:12 LOG4 log_alfabeam: ALFABEAM 2 23.181666564733082 15.649246071607223 2008-Jul-25 04:25:12 LOG4 log_alfabeam: ALFABEAM 3 23.174856897326279 15.609341002123006 2008-Jul-25 04:25:12 LOG4 log_alfabeam: ALFABEAM 4 23.173849038990344 15.516874420051550 2008-Jul-25 04:25:12 LOG4 log_alfabeam: ALFABEAM 5 23.179651689638053 15.465253132768948 2008-Jul-25 04:25:12 LOG4 log_alfabeam: ALFABEAM 6 23.186429378341888 15.506097613360227 2008-Jul-25 04:25:12 INFO2 take_data: Starting WAPP+GALFA scan: 820700020 2008-Jul-25 04:25:13 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jul-25 04:25:13 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jul-25 04:25:13 LOG5 begin_task: Level: (4) ID = <10257> Status = 0 0 0 0 ok 2008-Jul-25 04:25:13 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jul-25 04:25:13 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Jul-25 04:25:13 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 04:25:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:25:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:25:13 INFO1 WAPP=1+2+3+4-start_spectra: start sec 30314.00 2008-Jul-25 04:25:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2008-Jul-25 04:25:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jul-25 04:25:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 04:25:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 04:25:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 944.589620 MHz 2008-Jul-25 04:25:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 942.632164 MHz 2008-Jul-25 04:25:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Jul-25 04:25:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Jul-25 04:25:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1978.000000 MHz 2008-Jul-25 04:25:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2008-Jul-25 04:25:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2008-Jul-25 04:25:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.080 (still bad) 2008-Jul-25 04:25:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2008-Jul-25 04:25:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2008-Jul-25 04:25:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jul-25 04:25:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2008-Jul-25 04:25:24 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jul-25 04:25:24 LOG5 end_task: Level: (4) ID = <10257> Status = 0 0 0 0 ok 2008-Jul-25 04:25:24 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jul-25 04:25:24 LOG5 end_task: Level: (3) ID = <10256> Status = 0 0 0 0 ok 2008-Jul-25 04:25:24 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2008-Jul-25 04:25:24 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2008-Jul-25 04:25:24 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2008-Jul-25 04:25:24 LOG5 antvel: Calling 'antvel 231050.300000 153326.600000 J 0' 2008-Jul-25 04:25:24 LOG2 antvel: Precessing RA = 23:10:50.3 Dec = +15:33:26.6 Epoch = 2008.56724 J 2008-Jul-25 04:25:24 LOG2 antvel: Computed apparent RA = 23:11:17.5 Dec = +15:36:18.2 2008-Jul-25 04:25:24 LOG2 antvel: Parameters to Doppler: Topocentric 30324 2008 207 0.0 2008-Jul-25 04:25:24 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Jul-25 04:25:24 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2008-Jul-25 04:25:24 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2008-Jul-25 04:25:24 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jul-25 04:25:24 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jul-25 04:25:24 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Jul-25 04:25:24 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 04:25:24 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Jul-25 04:25:24 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jul-25 04:25:24 LOG5 begin_task: Level: (3) ID = <10258> Status = 0 0 0 0 ok 2008-Jul-25 04:25:24 LOG5 log_alfabeam: Parameters: 23.180638888888886 15.557388888888891 0.200926 2008.5672397140468 18.999933 2008-Jul-25 04:25:24 LOG4 log_alfabeam: ALFABEAM 0 23.180638888888886 15.557388888888887 2008-Jul-25 04:25:24 LOG4 log_alfabeam: ALFABEAM 1 23.187437830686008 15.597578250333660 2008-Jul-25 04:25:24 LOG4 log_alfabeam: ALFABEAM 2 23.181669540647622 15.649239424570009 2008-Jul-25 04:25:24 LOG4 log_alfabeam: ALFABEAM 3 23.174858598068770 15.609379802721161 2008-Jul-25 04:25:24 LOG4 log_alfabeam: ALFABEAM 4 23.173847689762884 15.516921738006516 2008-Jul-25 04:25:24 LOG4 log_alfabeam: ALFABEAM 5 23.179648575514108 15.465260424606484 2008-Jul-25 04:25:24 LOG4 log_alfabeam: ALFABEAM 6 23.186427661188269 15.506056441987683 2008-Jul-25 04:25:24 INFO2 take_data: Starting WAPP+GALFA scan: 820700021 2008-Jul-25 04:25:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jul-25 04:25:25 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jul-25 04:25:25 LOG5 begin_task: Level: (4) ID = <10259> Status = 0 0 0 0 ok 2008-Jul-25 04:25:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jul-25 04:25:25 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Jul-25 04:25:25 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 04:25:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:25:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:25:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 30326.00 2008-Jul-25 04:25:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2008-Jul-25 04:25:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jul-25 04:25:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 04:25:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 04:25:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 944.589620 MHz 2008-Jul-25 04:25:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 942.632164 MHz 2008-Jul-25 04:25:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Jul-25 04:25:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Jul-25 04:25:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1978.000000 MHz 2008-Jul-25 04:25:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2008-Jul-25 04:25:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2008-Jul-25 04:25:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2008-Jul-25 04:25:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2008-Jul-25 04:25:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2008-Jul-25 04:25:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jul-25 04:25:36 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jul-25 04:25:36 LOG5 end_task: Level: (4) ID = <10259> Status = 0 0 0 0 ok 2008-Jul-25 04:25:36 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jul-25 04:25:36 LOG5 end_task: Level: (3) ID = <10258> Status = 0 0 0 0 ok 2008-Jul-25 04:25:36 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2008-Jul-25 04:25:36 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2008-Jul-25 04:25:36 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2008-Jul-25 04:25:36 LOG5 antvel: Calling 'antvel 231050.300000 153326.600000 J 0' 2008-Jul-25 04:25:36 LOG2 antvel: Precessing RA = 23:10:50.3 Dec = +15:33:26.6 Epoch = 2008.56724 J 2008-Jul-25 04:25:36 LOG2 antvel: Computed apparent RA = 23:11:17.5 Dec = +15:36:18.2 2008-Jul-25 04:25:36 LOG2 antvel: Parameters to Doppler: Topocentric 30336 2008 207 0.0 2008-Jul-25 04:25:36 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Jul-25 04:25:36 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2008-Jul-25 04:25:36 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2008-Jul-25 04:25:36 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jul-25 04:25:36 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jul-25 04:25:36 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Jul-25 04:25:36 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 04:25:36 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Jul-25 04:25:36 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jul-25 04:25:36 LOG5 begin_task: Level: (3) ID = <10260> Status = 0 0 0 0 ok 2008-Jul-25 04:25:36 LOG5 log_alfabeam: Parameters: 23.180638888888886 15.557388888888891 0.204269 2008.5672400943038 18.999933 2008-Jul-25 04:25:36 LOG4 log_alfabeam: ALFABEAM 0 23.180638888888886 15.557388888888893 2008-Jul-25 04:25:36 LOG4 log_alfabeam: ALFABEAM 1 23.187439140922550 15.597532003092262 2008-Jul-25 04:25:36 LOG4 log_alfabeam: ALFABEAM 2 23.181672493145641 15.649232810115199 2008-Jul-25 04:25:36 LOG4 log_alfabeam: ALFABEAM 3 23.174860286813942 15.609418288584706 2008-Jul-25 04:25:36 LOG4 log_alfabeam: ALFABEAM 4 23.173846352544807 15.516968698934964 2008-Jul-25 04:25:36 LOG4 log_alfabeam: ALFABEAM 5 23.179645485671855 15.465267682514821 2008-Jul-25 04:25:36 LOG4 log_alfabeam: ALFABEAM 6 23.186425955933494 15.506015599587592 2008-Jul-25 04:25:36 INFO2 take_data: Starting WAPP+GALFA scan: 820700022 2008-Jul-25 04:25:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jul-25 04:25:37 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jul-25 04:25:37 LOG5 begin_task: Level: (4) ID = <10261> Status = 0 0 0 0 ok 2008-Jul-25 04:25:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jul-25 04:25:37 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Jul-25 04:25:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2008-Jul-25 04:25:37 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 04:25:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:25:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:25:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 30338.00 2008-Jul-25 04:25:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jul-25 04:25:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 04:25:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 04:25:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 944.589620 MHz 2008-Jul-25 04:25:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 942.632164 MHz 2008-Jul-25 04:25:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Jul-25 04:25:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Jul-25 04:25:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1978.000000 MHz 2008-Jul-25 04:25:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2008-Jul-25 04:25:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2008-Jul-25 04:25:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 04:25:41 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 0.980 0.916 2008-Jul-25 04:25:41 LOG4 check_wapp_levels: WAPP-2 power levels: 0.069 0.014 0.014 0.039 2008-Jul-25 04:25:41 LOG4 check_wapp_levels: WAPP-3 power levels: 0.108 0.014 0.026 0.014 2008-Jul-25 04:25:41 LOG4 check_wapp_levels: WAPP-4 power levels: 1.046 0.972 0.911 1.081 2008-Jul-25 04:25:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2008-Jul-25 04:25:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.086 (still bad) 2008-Jul-25 04:25:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2008-Jul-25 04:25:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jul-25 04:25:48 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jul-25 04:25:48 LOG5 end_task: Level: (4) ID = <10261> Status = 0 0 0 0 ok 2008-Jul-25 04:25:48 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jul-25 04:25:48 LOG5 end_task: Level: (3) ID = <10260> Status = 0 0 0 0 ok 2008-Jul-25 04:25:48 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2008-Jul-25 04:25:48 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2008-Jul-25 04:25:48 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2008-Jul-25 04:25:48 LOG5 antvel: Calling 'antvel 231050.300000 153326.600000 J 0' 2008-Jul-25 04:25:48 LOG2 antvel: Precessing RA = 23:10:50.3 Dec = +15:33:26.6 Epoch = 2008.56724 J 2008-Jul-25 04:25:48 LOG2 antvel: Computed apparent RA = 23:11:17.5 Dec = +15:36:18.2 2008-Jul-25 04:25:48 LOG2 antvel: Parameters to Doppler: Topocentric 30348 2008 207 0.0 2008-Jul-25 04:25:48 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Jul-25 04:25:48 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2008-Jul-25 04:25:48 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2008-Jul-25 04:25:48 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jul-25 04:25:48 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jul-25 04:25:48 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Jul-25 04:25:48 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 04:25:48 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Jul-25 04:25:48 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jul-25 04:25:48 LOG5 begin_task: Level: (3) ID = <10262> Status = 0 0 0 0 ok 2008-Jul-25 04:25:48 LOG5 log_alfabeam: Parameters: 23.180638888888886 15.557388888888891 0.207611 2008.5672404745608 18.999933 2008-Jul-25 04:25:48 LOG4 log_alfabeam: ALFABEAM 0 23.180638888888886 15.557388888888887 2008-Jul-25 04:25:48 LOG4 log_alfabeam: ALFABEAM 1 23.187440438726391 15.597486133505868 2008-Jul-25 04:25:48 LOG4 log_alfabeam: ALFABEAM 2 23.181675420690187 15.649226232173579 2008-Jul-25 04:25:48 LOG4 log_alfabeam: ALFABEAM 3 23.174861962649480 15.609456439898102 2008-Jul-25 04:25:48 LOG4 log_alfabeam: ALFABEAM 4 23.173845027997682 15.517015278059187 2008-Jul-25 04:25:48 LOG4 log_alfabeam: ALFABEAM 5 23.179642421721649 15.465274902168973 2008-Jul-25 04:25:48 LOG4 log_alfabeam: ALFABEAM 6 23.186424263502477 15.505975107245833 2008-Jul-25 04:25:48 INFO2 take_data: Starting WAPP+GALFA scan: 820700023 2008-Jul-25 04:25:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jul-25 04:25:49 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jul-25 04:25:49 LOG5 begin_task: Level: (4) ID = <10263> Status = 0 0 0 0 ok 2008-Jul-25 04:25:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jul-25 04:25:49 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Jul-25 04:25:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 04:25:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:25:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:25:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2008-Jul-25 04:25:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 30350.00 2008-Jul-25 04:25:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jul-25 04:25:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 04:25:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 04:25:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 944.589620 MHz 2008-Jul-25 04:25:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 942.632164 MHz 2008-Jul-25 04:25:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Jul-25 04:25:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Jul-25 04:25:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1978.000000 MHz 2008-Jul-25 04:25:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2008-Jul-25 04:25:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2008-Jul-25 04:25:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2008-Jul-25 04:25:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2008-Jul-25 04:25:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2008-Jul-25 04:25:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2008-Jul-25 04:26:00 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jul-25 04:26:00 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jul-25 04:26:00 LOG5 end_task: Level: (4) ID = <10263> Status = 0 0 0 0 ok 2008-Jul-25 04:26:00 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jul-25 04:26:00 LOG5 end_task: Level: (3) ID = <10262> Status = 0 0 0 0 ok 2008-Jul-25 04:26:00 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2008-Jul-25 04:26:00 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Jul-25 04:26:00 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Jul-25 04:26:00 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jul-25 04:26:00 LOG5 begin_task: Level: (3) ID = <10264> Status = 0 0 0 0 ok 2008-Jul-25 04:26:00 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jul-25 04:26:00 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Jul-25 04:26:00 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jul-25 04:26:00 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jul-25 04:26:00 LOG5 end_task: Level: (3) ID = <10264> Status = 0 0 0 0 ok 2008-Jul-25 04:26:00 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2008-Jul-25 04:26:00 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2008-Jul-25 04:26:00 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2008-Jul-25 04:26:00 LOG5 antvel: Calling 'antvel 231050.300000 153326.600000 J 0' 2008-Jul-25 04:26:00 LOG2 antvel: Precessing RA = 23:10:50.3 Dec = +15:33:26.6 Epoch = 2008.56724 J 2008-Jul-25 04:26:00 LOG2 antvel: Computed apparent RA = 23:11:17.5 Dec = +15:36:18.2 2008-Jul-25 04:26:00 LOG2 antvel: Parameters to Doppler: Topocentric 30360 2008 207 0.0 2008-Jul-25 04:26:00 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Jul-25 04:26:00 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2008-Jul-25 04:26:00 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2008-Jul-25 04:26:00 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jul-25 04:26:00 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jul-25 04:26:00 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Jul-25 04:26:00 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 04:26:00 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Jul-25 04:26:00 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jul-25 04:26:00 LOG5 begin_task: Level: (3) ID = <10265> Status = 0 0 0 0 ok 2008-Jul-25 04:26:00 LOG5 log_alfabeam: Parameters: 23.180638888888886 15.557388888888891 0.210954 2008.567240854818 18.999933 2008-Jul-25 04:26:00 LOG4 log_alfabeam: ALFABEAM 0 23.180638888888883 15.557388888888887 2008-Jul-25 04:26:00 LOG4 log_alfabeam: ALFABEAM 1 23.187441725008050 15.597440610875839 2008-Jul-25 04:26:00 LOG4 log_alfabeam: ALFABEAM 2 23.181678325259853 15.649219686778656 2008-Jul-25 04:26:00 LOG4 log_alfabeam: ALFABEAM 3 23.174863626675357 15.609494282661800 2008-Jul-25 04:26:00 LOG4 log_alfabeam: ALFABEAM 4 23.173843715192330 15.517061506534123 2008-Jul-25 04:26:00 LOG4 log_alfabeam: ALFABEAM 5 23.179639381594544 15.465282087910930 2008-Jul-25 04:26:00 LOG4 log_alfabeam: ALFABEAM 6 23.186422582787980 15.505934937423339 2008-Jul-25 04:26:00 INFO2 take_data: Starting WAPP+GALFA scan: 820700024 2008-Jul-25 04:26:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jul-25 04:26:01 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jul-25 04:26:01 LOG5 begin_task: Level: (4) ID = <10266> Status = 0 0 0 0 ok 2008-Jul-25 04:26:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jul-25 04:26:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Jul-25 04:26:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 04:26:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:26:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:26:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 30362.00 2008-Jul-25 04:26:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2008-Jul-25 04:26:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jul-25 04:26:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 04:26:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 04:26:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 944.589620 MHz 2008-Jul-25 04:26:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 942.632164 MHz 2008-Jul-25 04:26:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Jul-25 04:26:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Jul-25 04:26:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1978.000000 MHz 2008-Jul-25 04:26:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2008-Jul-25 04:26:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.383 (still bad) 2008-Jul-25 04:26:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.511 (still bad) 2008-Jul-25 04:26:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.506 (still bad) 2008-Jul-25 04:26:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.515 (still bad) 2008-Jul-25 04:26:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.510 (still bad) 2008-Jul-25 04:26:12 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jul-25 04:26:12 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jul-25 04:26:12 LOG5 end_task: Level: (4) ID = <10266> Status = 0 0 0 0 ok 2008-Jul-25 04:26:12 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jul-25 04:26:12 LOG5 end_task: Level: (3) ID = <10265> Status = 0 0 0 0 ok 2008-Jul-25 04:26:12 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2008-Jul-25 04:26:12 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2008-Jul-25 04:26:12 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2008-Jul-25 04:26:12 LOG5 antvel: Calling 'antvel 231050.300000 153326.600000 J 0' 2008-Jul-25 04:26:12 LOG2 antvel: Precessing RA = 23:10:50.3 Dec = +15:33:26.6 Epoch = 2008.56724 J 2008-Jul-25 04:26:12 LOG2 antvel: Computed apparent RA = 23:11:17.5 Dec = +15:36:18.2 2008-Jul-25 04:26:12 LOG2 antvel: Parameters to Doppler: Topocentric 30372 2008 207 0.0 2008-Jul-25 04:26:12 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Jul-25 04:26:12 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2008-Jul-25 04:26:12 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2008-Jul-25 04:26:12 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jul-25 04:26:12 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jul-25 04:26:12 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Jul-25 04:26:12 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 04:26:12 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Jul-25 04:26:12 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jul-25 04:26:12 LOG5 begin_task: Level: (3) ID = <10267> Status = 0 0 0 0 ok 2008-Jul-25 04:26:12 LOG5 log_alfabeam: Parameters: 23.180638888888886 15.557388888888891 0.214296 2008.567241235075 18.999933 2008-Jul-25 04:26:12 LOG4 log_alfabeam: ALFABEAM 0 23.180638888888879 15.557388888888898 2008-Jul-25 04:26:12 LOG4 log_alfabeam: ALFABEAM 1 23.187442999129885 15.597395459227711 2008-Jul-25 04:26:12 LOG4 log_alfabeam: ALFABEAM 2 23.181681205340691 15.649213177812813 2008-Jul-25 04:26:12 LOG4 log_alfabeam: ALFABEAM 3 23.174865277992172 15.609531797362552 2008-Jul-25 04:26:12 LOG4 log_alfabeam: ALFABEAM 4 23.173842414779656 15.517107359943202 2008-Jul-25 04:26:12 LOG4 log_alfabeam: ALFABEAM 5 23.179636366877013 15.465289235466816 2008-Jul-25 04:26:12 LOG4 log_alfabeam: ALFABEAM 6 23.186420914702015 15.505895110889400 2008-Jul-25 04:26:12 INFO2 take_data: Starting WAPP+GALFA scan: 820700025 2008-Jul-25 04:26:13 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jul-25 04:26:13 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jul-25 04:26:13 LOG5 begin_task: Level: (4) ID = <10268> Status = 0 0 0 0 ok 2008-Jul-25 04:26:13 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jul-25 04:26:13 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Jul-25 04:26:13 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 04:26:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:26:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:26:13 INFO1 WAPP=1+2+3+4-start_spectra: start sec 30374.00 2008-Jul-25 04:26:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.513 (still bad) 2008-Jul-25 04:26:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jul-25 04:26:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 04:26:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 04:26:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 944.589620 MHz 2008-Jul-25 04:26:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 942.632164 MHz 2008-Jul-25 04:26:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Jul-25 04:26:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Jul-25 04:26:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1978.000000 MHz 2008-Jul-25 04:26:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2008-Jul-25 04:26:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.487 (still bad) 2008-Jul-25 04:26:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.482 (still bad) 2008-Jul-25 04:26:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.485 (still bad) 2008-Jul-25 04:26:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.480 (still bad) 2008-Jul-25 04:26:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.483 (still bad) 2008-Jul-25 04:26:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jul-25 04:26:24 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jul-25 04:26:24 LOG5 end_task: Level: (4) ID = <10268> Status = 0 0 0 0 ok 2008-Jul-25 04:26:24 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jul-25 04:26:24 LOG5 end_task: Level: (3) ID = <10267> Status = 0 0 0 0 ok 2008-Jul-25 04:26:24 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2008-Jul-25 04:26:24 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2008-Jul-25 04:26:24 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2008-Jul-25 04:26:24 LOG5 antvel: Calling 'antvel 231050.300000 153326.600000 J 0' 2008-Jul-25 04:26:24 LOG2 antvel: Precessing RA = 23:10:50.3 Dec = +15:33:26.6 Epoch = 2008.56724 J 2008-Jul-25 04:26:24 LOG2 antvel: Computed apparent RA = 23:11:17.5 Dec = +15:36:18.2 2008-Jul-25 04:26:24 LOG2 antvel: Parameters to Doppler: Topocentric 30384 2008 207 0.0 2008-Jul-25 04:26:24 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Jul-25 04:26:24 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2008-Jul-25 04:26:24 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2008-Jul-25 04:26:24 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jul-25 04:26:24 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jul-25 04:26:24 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Jul-25 04:26:24 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 04:26:24 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Jul-25 04:26:24 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jul-25 04:26:24 LOG5 begin_task: Level: (3) ID = <10269> Status = 0 0 0 0 ok 2008-Jul-25 04:26:24 LOG5 log_alfabeam: Parameters: 23.180638888888886 15.557388888888891 0.217639 2008.567241615332 18.999933 2008-Jul-25 04:26:24 LOG4 log_alfabeam: ALFABEAM 0 23.180638888888886 15.557388888888889 2008-Jul-25 04:26:24 LOG4 log_alfabeam: ALFABEAM 1 23.187444261984442 15.597350648367742 2008-Jul-25 04:26:24 LOG4 log_alfabeam: ALFABEAM 2 23.181684062877359 15.649206701343925 2008-Jul-25 04:26:24 LOG4 log_alfabeam: ALFABEAM 3 23.174866917683346 15.609569009538529 2008-Jul-25 04:26:24 LOG4 log_alfabeam: ALFABEAM 4 23.173841125848842 15.517152868931143 2008-Jul-25 04:26:24 LOG4 log_alfabeam: ALFABEAM 5 23.179633375535385 15.465296349143006 2008-Jul-25 04:26:24 LOG4 log_alfabeam: ALFABEAM 6 23.186419258153673 15.505855600587775 2008-Jul-25 04:26:24 INFO2 take_data: Starting WAPP+GALFA scan: 820700026 2008-Jul-25 04:26:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jul-25 04:26:25 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jul-25 04:26:25 LOG5 begin_task: Level: (4) ID = <10270> Status = 0 0 0 0 ok 2008-Jul-25 04:26:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jul-25 04:26:25 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Jul-25 04:26:25 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 04:26:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:26:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:26:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 30386.00 2008-Jul-25 04:26:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.483 (still bad) 2008-Jul-25 04:26:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jul-25 04:26:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 04:26:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 04:26:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 944.589620 MHz 2008-Jul-25 04:26:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 942.632164 MHz 2008-Jul-25 04:26:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Jul-25 04:26:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Jul-25 04:26:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1978.000000 MHz 2008-Jul-25 04:26:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2008-Jul-25 04:26:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.481 (still bad) 2008-Jul-25 04:26:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.480 (still bad) 2008-Jul-25 04:26:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.486 (still bad) 2008-Jul-25 04:26:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.482 (still bad) 2008-Jul-25 04:26:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jul-25 04:26:36 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jul-25 04:26:36 LOG5 end_task: Level: (4) ID = <10270> Status = 0 0 0 0 ok 2008-Jul-25 04:26:36 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jul-25 04:26:36 LOG5 end_task: Level: (3) ID = <10269> Status = 0 0 0 0 ok 2008-Jul-25 04:26:36 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2008-Jul-25 04:26:36 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2008-Jul-25 04:26:36 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2008-Jul-25 04:26:36 LOG5 antvel: Calling 'antvel 231050.300000 153326.600000 J 0' 2008-Jul-25 04:26:36 LOG2 antvel: Precessing RA = 23:10:50.3 Dec = +15:33:26.6 Epoch = 2008.56724 J 2008-Jul-25 04:26:36 LOG2 antvel: Computed apparent RA = 23:11:17.5 Dec = +15:36:18.2 2008-Jul-25 04:26:36 LOG2 antvel: Parameters to Doppler: Topocentric 30396 2008 207 0.0 2008-Jul-25 04:26:36 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Jul-25 04:26:36 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2008-Jul-25 04:26:36 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2008-Jul-25 04:26:36 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jul-25 04:26:36 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jul-25 04:26:36 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Jul-25 04:26:36 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 04:26:36 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Jul-25 04:26:36 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jul-25 04:26:36 LOG5 begin_task: Level: (3) ID = <10271> Status = 0 0 0 0 ok 2008-Jul-25 04:26:36 LOG5 log_alfabeam: Parameters: 23.180638888888886 15.557388888888891 0.220981 2008.567241995589 18.999933 2008-Jul-25 04:26:36 LOG4 log_alfabeam: ALFABEAM 0 23.180638888888886 15.557388888888903 2008-Jul-25 04:26:36 LOG4 log_alfabeam: ALFABEAM 1 23.187445512944315 15.597306201969834 2008-Jul-25 04:26:36 LOG4 log_alfabeam: ALFABEAM 2 23.181686896378512 15.649200261206582 2008-Jul-25 04:26:36 LOG4 log_alfabeam: ALFABEAM 3 23.174868544862150 15.609605899973962 2008-Jul-25 04:26:36 LOG4 log_alfabeam: ALFABEAM 4 23.173839849040320 15.517198009437140 2008-Jul-25 04:26:36 LOG4 log_alfabeam: ALFABEAM 5 23.179630409132610 15.465303424716279 2008-Jul-25 04:26:36 LOG4 log_alfabeam: ALFABEAM 6 23.186417614042259 15.505816426976336 2008-Jul-25 04:26:36 INFO2 take_data: Starting WAPP+GALFA scan: 820700027 2008-Jul-25 04:26:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jul-25 04:26:37 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jul-25 04:26:37 LOG5 begin_task: Level: (4) ID = <10272> Status = 0 0 0 0 ok 2008-Jul-25 04:26:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jul-25 04:26:37 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Jul-25 04:26:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.483 (still bad) 2008-Jul-25 04:26:37 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 04:26:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:26:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:26:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 30398.00 2008-Jul-25 04:26:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jul-25 04:26:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 04:26:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 04:26:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 944.589620 MHz 2008-Jul-25 04:26:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 942.632164 MHz 2008-Jul-25 04:26:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Jul-25 04:26:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Jul-25 04:26:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1978.000000 MHz 2008-Jul-25 04:26:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2008-Jul-25 04:26:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.485 (still bad) 2008-Jul-25 04:26:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.480 (still bad) 2008-Jul-25 04:26:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 04:26:43 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 1.311 1.222 2008-Jul-25 04:26:43 LOG4 check_wapp_levels: WAPP-2 power levels: 0.089 0.014 0.014 0.050 2008-Jul-25 04:26:43 LOG4 check_wapp_levels: WAPP-3 power levels: 0.148 0.014 0.026 0.014 2008-Jul-25 04:26:43 LOG4 check_wapp_levels: WAPP-4 power levels: 1.439 1.335 1.254 1.485 2008-Jul-25 04:26:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.480 (still bad) 2008-Jul-25 04:26:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.480 (still bad) 2008-Jul-25 04:26:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jul-25 04:26:48 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jul-25 04:26:48 LOG5 end_task: Level: (4) ID = <10272> Status = 0 0 0 0 ok 2008-Jul-25 04:26:48 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jul-25 04:26:48 LOG5 end_task: Level: (3) ID = <10271> Status = 0 0 0 0 ok 2008-Jul-25 04:26:48 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2008-Jul-25 04:26:48 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2008-Jul-25 04:26:48 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2008-Jul-25 04:26:48 LOG5 antvel: Calling 'antvel 231050.300000 153326.600000 J 0' 2008-Jul-25 04:26:48 LOG2 antvel: Precessing RA = 23:10:50.3 Dec = +15:33:26.6 Epoch = 2008.56724 J 2008-Jul-25 04:26:48 LOG2 antvel: Computed apparent RA = 23:11:17.5 Dec = +15:36:18.2 2008-Jul-25 04:26:48 LOG2 antvel: Parameters to Doppler: Topocentric 30408 2008 207 0.0 2008-Jul-25 04:26:48 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Jul-25 04:26:48 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2008-Jul-25 04:26:48 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2008-Jul-25 04:26:48 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jul-25 04:26:48 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jul-25 04:26:48 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Jul-25 04:26:48 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 04:26:48 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Jul-25 04:26:48 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jul-25 04:26:48 LOG5 begin_task: Level: (3) ID = <10273> Status = 0 0 0 0 ok 2008-Jul-25 04:26:48 LOG5 log_alfabeam: Parameters: 23.180638888888886 15.557388888888891 0.224324 2008.567242375846 18.999933 2008-Jul-25 04:26:48 LOG4 log_alfabeam: ALFABEAM 0 23.180638888888886 15.557388888888903 2008-Jul-25 04:26:48 LOG4 log_alfabeam: ALFABEAM 1 23.187446752884480 15.597262090335500 2008-Jul-25 04:26:48 LOG4 log_alfabeam: ALFABEAM 2 23.181689707755531 15.649193853503371 2008-Jul-25 04:26:48 LOG4 log_alfabeam: ALFABEAM 3 23.174870160595745 15.609642493754775 2008-Jul-25 04:26:48 LOG4 log_alfabeam: ALFABEAM 4 23.173838583461166 15.517242811605437 2008-Jul-25 04:26:48 LOG4 log_alfabeam: ALFABEAM 5 23.179627465669558 15.465310466457131 2008-Jul-25 04:26:48 LOG4 log_alfabeam: ALFABEAM 6 23.186415981292939 15.505777563471417 2008-Jul-25 04:26:48 INFO2 take_data: Starting WAPP+GALFA scan: 820700028 2008-Jul-25 04:26:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jul-25 04:26:49 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jul-25 04:26:49 LOG5 begin_task: Level: (4) ID = <10274> Status = 0 0 0 0 ok 2008-Jul-25 04:26:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jul-25 04:26:49 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Jul-25 04:26:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 04:26:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:26:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:26:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.480 (still bad) 2008-Jul-25 04:26:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 30410.00 2008-Jul-25 04:26:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jul-25 04:26:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 04:26:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 04:26:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 944.589620 MHz 2008-Jul-25 04:26:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 942.632164 MHz 2008-Jul-25 04:26:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Jul-25 04:26:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Jul-25 04:26:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1978.000000 MHz 2008-Jul-25 04:26:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2008-Jul-25 04:26:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.486 (still bad) 2008-Jul-25 04:26:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.481 (still bad) 2008-Jul-25 04:26:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.485 (still bad) 2008-Jul-25 04:26:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.485 (still bad) 2008-Jul-25 04:26:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.483 (still bad) 2008-Jul-25 04:27:00 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jul-25 04:27:00 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jul-25 04:27:00 LOG5 end_task: Level: (4) ID = <10274> Status = 0 0 0 0 ok 2008-Jul-25 04:27:00 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jul-25 04:27:00 LOG5 end_task: Level: (3) ID = <10273> Status = 0 0 0 0 ok 2008-Jul-25 04:27:00 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2008-Jul-25 04:27:00 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2008-Jul-25 04:27:00 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2008-Jul-25 04:27:00 LOG5 antvel: Calling 'antvel 231050.300000 153326.600000 J 0' 2008-Jul-25 04:27:00 LOG2 antvel: Precessing RA = 23:10:50.3 Dec = +15:33:26.6 Epoch = 2008.56724 J 2008-Jul-25 04:27:00 LOG2 antvel: Computed apparent RA = 23:11:17.5 Dec = +15:36:18.2 2008-Jul-25 04:27:00 LOG2 antvel: Parameters to Doppler: Topocentric 30420 2008 207 0.0 2008-Jul-25 04:27:00 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Jul-25 04:27:00 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2008-Jul-25 04:27:00 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2008-Jul-25 04:27:00 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jul-25 04:27:00 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jul-25 04:27:00 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Jul-25 04:27:00 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 04:27:00 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Jul-25 04:27:00 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jul-25 04:27:00 LOG5 begin_task: Level: (3) ID = <10275> Status = 0 0 0 0 ok 2008-Jul-25 04:27:00 LOG5 log_alfabeam: Parameters: 23.180638888888886 15.557388888888891 0.227666 2008.5672427561033 18.999933 2008-Jul-25 04:27:00 LOG4 log_alfabeam: ALFABEAM 0 23.180638888888886 15.557388888888893 2008-Jul-25 04:27:00 LOG4 log_alfabeam: ALFABEAM 1 23.187447981187656 15.597218336792373 2008-Jul-25 04:27:00 LOG4 log_alfabeam: ALFABEAM 2 23.181692495539394 15.649187482021523 2008-Jul-25 04:27:00 LOG4 log_alfabeam: ALFABEAM 3 23.174871764009929 15.609678771957647 2008-Jul-25 04:27:00 LOG4 log_alfabeam: ALFABEAM 4 23.173837329741520 15.517287251725357 2008-Jul-25 04:27:00 LOG4 log_alfabeam: ALFABEAM 5 23.179624546686085 15.465317470192232 2008-Jul-25 04:27:00 LOG4 log_alfabeam: ALFABEAM 6 23.186414360792504 15.505739030224442 2008-Jul-25 04:27:00 INFO2 take_data: Starting WAPP+GALFA scan: 820700029 2008-Jul-25 04:27:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jul-25 04:27:01 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jul-25 04:27:01 LOG5 begin_task: Level: (4) ID = <10276> Status = 0 0 0 0 ok 2008-Jul-25 04:27:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jul-25 04:27:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Jul-25 04:27:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 04:27:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:27:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:27:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 30422.00 2008-Jul-25 04:27:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.486 (still bad) 2008-Jul-25 04:27:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jul-25 04:27:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 04:27:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 04:27:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 944.589620 MHz 2008-Jul-25 04:27:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 942.632164 MHz 2008-Jul-25 04:27:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Jul-25 04:27:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Jul-25 04:27:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1978.000000 MHz 2008-Jul-25 04:27:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2008-Jul-25 04:27:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.487 (still bad) 2008-Jul-25 04:27:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.484 (still bad) 2008-Jul-25 04:27:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.487 (still bad) 2008-Jul-25 04:27:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.484 (still bad) 2008-Jul-25 04:27:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.485 (still bad) 2008-Jul-25 04:27:12 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jul-25 04:27:12 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jul-25 04:27:12 LOG5 end_task: Level: (4) ID = <10276> Status = 0 0 0 0 ok 2008-Jul-25 04:27:12 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jul-25 04:27:12 LOG5 end_task: Level: (3) ID = <10275> Status = 0 0 0 0 ok 2008-Jul-25 04:27:12 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2008-Jul-25 04:27:12 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2008-Jul-25 04:27:12 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2008-Jul-25 04:27:12 LOG5 antvel: Calling 'antvel 231050.300000 153326.600000 J 0' 2008-Jul-25 04:27:12 LOG2 antvel: Precessing RA = 23:10:50.3 Dec = +15:33:26.6 Epoch = 2008.56724 J 2008-Jul-25 04:27:12 LOG2 antvel: Computed apparent RA = 23:11:17.5 Dec = +15:36:18.2 2008-Jul-25 04:27:12 LOG2 antvel: Parameters to Doppler: Topocentric 30432 2008 207 0.0 2008-Jul-25 04:27:12 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Jul-25 04:27:12 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2008-Jul-25 04:27:12 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2008-Jul-25 04:27:12 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jul-25 04:27:12 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jul-25 04:27:12 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Jul-25 04:27:12 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 04:27:12 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Jul-25 04:27:12 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jul-25 04:27:12 LOG5 begin_task: Level: (3) ID = <10277> Status = 0 0 0 0 ok 2008-Jul-25 04:27:12 LOG5 log_alfabeam: Parameters: 23.180638888888886 15.557388888888891 0.231009 2008.5672431363603 18.999933 2008-Jul-25 04:27:12 LOG4 log_alfabeam: ALFABEAM 0 23.180638888888886 15.557388888888896 2008-Jul-25 04:27:12 LOG4 log_alfabeam: ALFABEAM 1 23.187449198711700 15.597174912127736 2008-Jul-25 04:27:12 LOG4 log_alfabeam: ALFABEAM 2 23.181695261608859 15.649181142898772 2008-Jul-25 04:27:12 LOG4 log_alfabeam: ALFABEAM 3 23.174873356155814 15.609714759225968 2008-Jul-25 04:27:12 LOG4 log_alfabeam: ALFABEAM 4 23.173836087005917 15.517331359450369 2008-Jul-25 04:27:12 LOG4 log_alfabeam: ALFABEAM 5 23.179621650216855 15.465324440155856 2008-Jul-25 04:27:12 LOG4 log_alfabeam: ALFABEAM 6 23.186412751481949 15.505700801114267 2008-Jul-25 04:27:12 INFO2 take_data: Starting WAPP+GALFA scan: 820700030 2008-Jul-25 04:27:13 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jul-25 04:27:13 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jul-25 04:27:13 LOG5 begin_task: Level: (4) ID = <10278> Status = 0 0 0 0 ok 2008-Jul-25 04:27:13 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jul-25 04:27:13 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Jul-25 04:27:13 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 04:27:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:27:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:27:13 INFO1 WAPP=1+2+3+4-start_spectra: start sec 30434.00 2008-Jul-25 04:27:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.485 (still bad) 2008-Jul-25 04:27:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jul-25 04:27:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 04:27:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 04:27:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 944.589620 MHz 2008-Jul-25 04:27:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 942.632164 MHz 2008-Jul-25 04:27:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Jul-25 04:27:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Jul-25 04:27:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1978.000000 MHz 2008-Jul-25 04:27:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2008-Jul-25 04:27:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.490 (still bad) 2008-Jul-25 04:27:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.486 (still bad) 2008-Jul-25 04:27:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.488 (still bad) 2008-Jul-25 04:27:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.487 (still bad) 2008-Jul-25 04:27:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jul-25 04:27:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.490 (still bad) 2008-Jul-25 04:27:24 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jul-25 04:27:24 LOG5 end_task: Level: (4) ID = <10278> Status = 0 0 0 0 ok 2008-Jul-25 04:27:24 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jul-25 04:27:24 LOG5 end_task: Level: (3) ID = <10277> Status = 0 0 0 0 ok 2008-Jul-25 04:27:24 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2008-Jul-25 04:27:24 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2008-Jul-25 04:27:24 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2008-Jul-25 04:27:24 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Jul-25 04:27:24 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Jul-25 04:27:24 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jul-25 04:27:24 LOG5 begin_task: Level: (3) ID = <10279> Status = 0 0 0 0 ok 2008-Jul-25 04:27:24 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jul-25 04:27:24 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jul-25 04:27:24 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jul-25 04:27:24 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jul-25 04:27:24 LOG5 end_task: Level: (3) ID = <10279> Status = 0 0 0 0 ok 2008-Jul-25 04:27:24 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2008-Jul-25 04:27:24 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2008-Jul-25 04:27:24 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2008-Jul-25 04:27:24 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2008-Jul-25 04:27:24 LOG5 antvel: Calling 'antvel 231050.300000 153326.600000 J 0' 2008-Jul-25 04:27:24 LOG2 antvel: Precessing RA = 23:10:50.3 Dec = +15:33:26.6 Epoch = 2008.56724 J 2008-Jul-25 04:27:24 LOG2 antvel: Computed apparent RA = 23:11:17.5 Dec = +15:36:18.2 2008-Jul-25 04:27:24 LOG2 antvel: Parameters to Doppler: Topocentric 30444 2008 207 0.0 2008-Jul-25 04:27:24 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Jul-25 04:27:24 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2008-Jul-25 04:27:24 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2008-Jul-25 04:27:24 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jul-25 04:27:24 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jul-25 04:27:24 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Jul-25 04:27:24 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 04:27:24 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Jul-25 04:27:24 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jul-25 04:27:24 LOG5 begin_task: Level: (3) ID = <10280> Status = 0 0 0 0 ok 2008-Jul-25 04:27:24 LOG5 log_alfabeam: Parameters: 23.180638888888886 15.557388888888891 0.234351 2008.5672435166173 18.999933 2008-Jul-25 04:27:24 LOG4 log_alfabeam: ALFABEAM 0 23.180638888888886 15.557388888888896 2008-Jul-25 04:27:24 LOG4 log_alfabeam: ALFABEAM 1 23.187450404849226 15.597131839328359 2008-Jul-25 04:27:24 LOG4 log_alfabeam: ALFABEAM 2 23.181698004516850 15.649174839875489 2008-Jul-25 04:27:24 LOG4 log_alfabeam: ALFABEAM 3 23.174874936171552 15.609750436924266 2008-Jul-25 04:27:24 LOG4 log_alfabeam: ALFABEAM 4 23.173834855874418 15.517375111414532 2008-Jul-25 04:27:24 LOG4 log_alfabeam: ALFABEAM 5 23.179618777778995 15.465331372224137 2008-Jul-25 04:27:24 LOG4 log_alfabeam: ALFABEAM 6 23.186411154235721 15.505662895990834 2008-Jul-25 04:27:24 INFO2 take_data: Starting WAPP+GALFA scan: 820700031 2008-Jul-25 04:27:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jul-25 04:27:25 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jul-25 04:27:25 LOG5 begin_task: Level: (4) ID = <10281> Status = 0 0 0 0 ok 2008-Jul-25 04:27:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jul-25 04:27:25 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Jul-25 04:27:25 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 04:27:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:27:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:27:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 30446.00 2008-Jul-25 04:27:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.490 (still bad) 2008-Jul-25 04:27:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jul-25 04:27:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 04:27:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 04:27:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 944.589620 MHz 2008-Jul-25 04:27:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 942.632164 MHz 2008-Jul-25 04:27:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Jul-25 04:27:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Jul-25 04:27:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1978.000000 MHz 2008-Jul-25 04:27:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2008-Jul-25 04:27:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2008-Jul-25 04:27:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2008-Jul-25 04:27:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2008-Jul-25 04:27:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2008-Jul-25 04:27:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jul-25 04:27:36 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jul-25 04:27:36 LOG5 end_task: Level: (4) ID = <10281> Status = 0 0 0 0 ok 2008-Jul-25 04:27:36 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jul-25 04:27:36 LOG5 end_task: Level: (3) ID = <10280> Status = 0 0 0 0 ok 2008-Jul-25 04:27:36 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2008-Jul-25 04:27:36 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2008-Jul-25 04:27:36 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2008-Jul-25 04:27:36 LOG5 antvel: Calling 'antvel 231050.300000 153326.600000 J 0' 2008-Jul-25 04:27:36 LOG2 antvel: Precessing RA = 23:10:50.3 Dec = +15:33:26.6 Epoch = 2008.56724 J 2008-Jul-25 04:27:36 LOG2 antvel: Computed apparent RA = 23:11:17.5 Dec = +15:36:18.2 2008-Jul-25 04:27:36 LOG2 antvel: Parameters to Doppler: Topocentric 30456 2008 207 0.0 2008-Jul-25 04:27:36 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Jul-25 04:27:36 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2008-Jul-25 04:27:36 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2008-Jul-25 04:27:36 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jul-25 04:27:36 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jul-25 04:27:36 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Jul-25 04:27:36 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 04:27:36 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Jul-25 04:27:36 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jul-25 04:27:36 LOG5 begin_task: Level: (3) ID = <10282> Status = 0 0 0 0 ok 2008-Jul-25 04:27:36 LOG5 log_alfabeam: Parameters: 23.180638888888886 15.557388888888891 0.237693 2008.5672438968743 18.999933 2008-Jul-25 04:27:36 LOG4 log_alfabeam: ALFABEAM 0 23.180638888888886 15.557388888888896 2008-Jul-25 04:27:36 LOG4 log_alfabeam: ALFABEAM 1 23.187451600085367 15.597089102395904 2008-Jul-25 04:27:36 LOG4 log_alfabeam: ALFABEAM 2 23.181700725299351 15.649168570995444 2008-Jul-25 04:27:36 LOG4 log_alfabeam: ALFABEAM 3 23.174876504624891 15.609785818719672 2008-Jul-25 04:27:36 LOG4 log_alfabeam: ALFABEAM 4 23.173833635851963 15.517418523850292 2008-Jul-25 04:27:36 LOG4 log_alfabeam: ALFABEAM 5 23.179615928289500 15.465338268536517 2008-Jul-25 04:27:36 LOG4 log_alfabeam: ALFABEAM 6 23.186409568483157 15.505625300389124 2008-Jul-25 04:27:36 INFO2 take_data: Starting WAPP+GALFA scan: 820700032 2008-Jul-25 04:27:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jul-25 04:27:37 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jul-25 04:27:37 LOG5 begin_task: Level: (4) ID = <10283> Status = 0 0 0 0 ok 2008-Jul-25 04:27:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jul-25 04:27:37 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Jul-25 04:27:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2008-Jul-25 04:27:37 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 04:27:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:27:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:27:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 30458.00 2008-Jul-25 04:27:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jul-25 04:27:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 04:27:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 04:27:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 944.589620 MHz 2008-Jul-25 04:27:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 942.632164 MHz 2008-Jul-25 04:27:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Jul-25 04:27:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Jul-25 04:27:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1978.000000 MHz 2008-Jul-25 04:27:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2008-Jul-25 04:27:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2008-Jul-25 04:27:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2008-Jul-25 04:27:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2008-Jul-25 04:27:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 04:27:45 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 0.997 0.926 2008-Jul-25 04:27:45 LOG4 check_wapp_levels: WAPP-2 power levels: 0.070 0.014 0.014 0.042 2008-Jul-25 04:27:45 LOG4 check_wapp_levels: WAPP-3 power levels: 0.110 0.014 0.026 0.014 2008-Jul-25 04:27:45 LOG4 check_wapp_levels: WAPP-4 power levels: 1.046 0.984 0.913 1.095 2008-Jul-25 04:27:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2008-Jul-25 04:27:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jul-25 04:27:48 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jul-25 04:27:48 LOG5 end_task: Level: (4) ID = <10283> Status = 0 0 0 0 ok 2008-Jul-25 04:27:48 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jul-25 04:27:48 LOG5 end_task: Level: (3) ID = <10282> Status = 0 0 0 0 ok 2008-Jul-25 04:27:48 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2008-Jul-25 04:27:48 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2008-Jul-25 04:27:48 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2008-Jul-25 04:27:48 LOG5 antvel: Calling 'antvel 231050.300000 153326.600000 J 0' 2008-Jul-25 04:27:48 LOG2 antvel: Precessing RA = 23:10:50.3 Dec = +15:33:26.6 Epoch = 2008.56724 J 2008-Jul-25 04:27:48 LOG2 antvel: Computed apparent RA = 23:11:17.5 Dec = +15:36:18.2 2008-Jul-25 04:27:48 LOG2 antvel: Parameters to Doppler: Topocentric 30468 2008 207 0.0 2008-Jul-25 04:27:48 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Jul-25 04:27:48 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2008-Jul-25 04:27:48 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2008-Jul-25 04:27:48 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jul-25 04:27:48 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jul-25 04:27:48 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Jul-25 04:27:48 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 04:27:48 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Jul-25 04:27:48 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jul-25 04:27:48 LOG5 begin_task: Level: (3) ID = <10284> Status = 0 0 0 0 ok 2008-Jul-25 04:27:48 LOG5 log_alfabeam: Parameters: 23.180638888888886 15.557388888888891 0.241036 2008.5672442771313 18.999933 2008-Jul-25 04:27:48 LOG4 log_alfabeam: ALFABEAM 0 23.180638888888886 15.557388888888887 2008-Jul-25 04:27:48 LOG4 log_alfabeam: ALFABEAM 1 23.187452784890546 15.597046685767889 2008-Jul-25 04:27:48 LOG4 log_alfabeam: ALFABEAM 2 23.181703424963359 15.649162334340655 2008-Jul-25 04:27:48 LOG4 log_alfabeam: ALFABEAM 3 23.174878062068924 15.609820917889005 2008-Jul-25 04:27:48 LOG4 log_alfabeam: ALFABEAM 4 23.173832426458482 15.517461612549566 2008-Jul-25 04:27:48 LOG4 log_alfabeam: ALFABEAM 5 23.179613100695470 15.465345131192617 2008-Jul-25 04:27:48 LOG4 log_alfabeam: ALFABEAM 6 23.186407993668208 15.505588000252230 2008-Jul-25 04:27:48 INFO2 take_data: Starting WAPP+GALFA scan: 820700033 2008-Jul-25 04:27:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jul-25 04:27:49 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jul-25 04:27:49 LOG5 begin_task: Level: (4) ID = <10285> Status = 0 0 0 0 ok 2008-Jul-25 04:27:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jul-25 04:27:49 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Jul-25 04:27:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 04:27:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:27:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:27:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2008-Jul-25 04:27:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 30470.00 2008-Jul-25 04:27:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jul-25 04:27:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 04:27:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 04:27:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 944.589620 MHz 2008-Jul-25 04:27:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 942.632164 MHz 2008-Jul-25 04:27:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Jul-25 04:27:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Jul-25 04:27:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1978.000000 MHz 2008-Jul-25 04:27:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2008-Jul-25 04:27:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2008-Jul-25 04:27:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2008-Jul-25 04:27:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2008-Jul-25 04:27:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2008-Jul-25 04:27:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2008-Jul-25 04:28:00 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jul-25 04:28:00 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jul-25 04:28:00 LOG5 end_task: Level: (4) ID = <10285> Status = 0 0 0 0 ok 2008-Jul-25 04:28:00 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jul-25 04:28:00 LOG5 end_task: Level: (3) ID = <10284> Status = 0 0 0 0 ok 2008-Jul-25 04:28:00 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2008-Jul-25 04:28:00 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2008-Jul-25 04:28:00 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2008-Jul-25 04:28:00 LOG5 antvel: Calling 'antvel 231050.300000 153326.600000 J 0' 2008-Jul-25 04:28:00 LOG2 antvel: Precessing RA = 23:10:50.3 Dec = +15:33:26.6 Epoch = 2008.56724 J 2008-Jul-25 04:28:00 LOG2 antvel: Computed apparent RA = 23:11:17.5 Dec = +15:36:18.2 2008-Jul-25 04:28:00 LOG2 antvel: Parameters to Doppler: Topocentric 30480 2008 207 0.0 2008-Jul-25 04:28:00 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Jul-25 04:28:00 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2008-Jul-25 04:28:00 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2008-Jul-25 04:28:00 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jul-25 04:28:00 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jul-25 04:28:00 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Jul-25 04:28:00 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 04:28:00 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Jul-25 04:28:00 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jul-25 04:28:00 LOG5 begin_task: Level: (3) ID = <10286> Status = 0 0 0 0 ok 2008-Jul-25 04:28:00 LOG5 log_alfabeam: Parameters: 23.180638888888886 15.557388888888891 0.244378 2008.5672446573885 18.999933 2008-Jul-25 04:28:00 LOG4 log_alfabeam: ALFABEAM 0 23.180638888888883 15.557388888888887 2008-Jul-25 04:28:00 LOG4 log_alfabeam: ALFABEAM 1 23.187453958671917 15.597004611929544 2008-Jul-25 04:28:00 LOG4 log_alfabeam: ALFABEAM 2 23.181706102094083 15.649156133582217 2008-Jul-25 04:28:00 LOG4 log_alfabeam: ALFABEAM 3 23.174879607659925 15.609855716219947 2008-Jul-25 04:28:00 LOG4 log_alfabeam: ALFABEAM 4 23.173831228299235 15.517504354653713 2008-Jul-25 04:28:00 LOG4 log_alfabeam: ALFABEAM 5 23.179610296480554 15.465351956141745 2008-Jul-25 04:28:00 LOG4 log_alfabeam: ALFABEAM 6 23.186406430647121 15.505551014986874 2008-Jul-25 04:28:00 INFO2 take_data: Starting WAPP+GALFA scan: 820700034 2008-Jul-25 04:28:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jul-25 04:28:01 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jul-25 04:28:01 LOG5 begin_task: Level: (4) ID = <10287> Status = 0 0 0 0 ok 2008-Jul-25 04:28:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jul-25 04:28:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Jul-25 04:28:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 04:28:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:28:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:28:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 30482.00 2008-Jul-25 04:28:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2008-Jul-25 04:28:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jul-25 04:28:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 04:28:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 04:28:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 944.589620 MHz 2008-Jul-25 04:28:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 942.632164 MHz 2008-Jul-25 04:28:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Jul-25 04:28:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Jul-25 04:28:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1978.000000 MHz 2008-Jul-25 04:28:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2008-Jul-25 04:28:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2008-Jul-25 04:28:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2008-Jul-25 04:28:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2008-Jul-25 04:28:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2008-Jul-25 04:28:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2008-Jul-25 04:28:12 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jul-25 04:28:12 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jul-25 04:28:12 LOG5 end_task: Level: (4) ID = <10287> Status = 0 0 0 0 ok 2008-Jul-25 04:28:12 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jul-25 04:28:12 LOG5 end_task: Level: (3) ID = <10286> Status = 0 0 0 0 ok 2008-Jul-25 04:28:12 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2008-Jul-25 04:28:12 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2008-Jul-25 04:28:12 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2008-Jul-25 04:28:12 LOG5 antvel: Calling 'antvel 231050.300000 153326.600000 J 0' 2008-Jul-25 04:28:12 LOG2 antvel: Precessing RA = 23:10:50.3 Dec = +15:33:26.6 Epoch = 2008.56725 J 2008-Jul-25 04:28:12 LOG2 antvel: Computed apparent RA = 23:11:17.5 Dec = +15:36:18.2 2008-Jul-25 04:28:12 LOG2 antvel: Parameters to Doppler: Topocentric 30492 2008 207 0.0 2008-Jul-25 04:28:12 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Jul-25 04:28:12 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2008-Jul-25 04:28:12 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2008-Jul-25 04:28:12 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jul-25 04:28:12 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jul-25 04:28:12 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Jul-25 04:28:12 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 04:28:12 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Jul-25 04:28:12 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jul-25 04:28:12 LOG5 begin_task: Level: (3) ID = <10288> Status = 0 0 0 0 ok 2008-Jul-25 04:28:12 LOG5 log_alfabeam: Parameters: 23.180638888888886 15.557388888888891 0.247721 2008.5672450376455 18.999933 2008-Jul-25 04:28:12 LOG4 log_alfabeam: ALFABEAM 0 23.180638888888886 15.557388888888898 2008-Jul-25 04:28:12 LOG4 log_alfabeam: ALFABEAM 1 23.187455122246327 15.596962852842628 2008-Jul-25 04:28:12 LOG4 log_alfabeam: ALFABEAM 2 23.181708758491606 15.649149964946751 2008-Jul-25 04:28:12 LOG4 log_alfabeam: ALFABEAM 3 23.174881142410101 15.609890237289786 2008-Jul-25 04:28:12 LOG4 log_alfabeam: ALFABEAM 4 23.173830040540540 15.517546778629301 2008-Jul-25 04:28:12 LOG4 log_alfabeam: ALFABEAM 5 23.179607513761017 15.465358747526077 2008-Jul-25 04:28:12 LOG4 log_alfabeam: ALFABEAM 6 23.186404878399397 15.505514319586052 2008-Jul-25 04:28:12 INFO2 take_data: Starting WAPP+GALFA scan: 820700035 2008-Jul-25 04:28:13 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jul-25 04:28:13 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jul-25 04:28:13 LOG5 begin_task: Level: (4) ID = <10289> Status = 0 0 0 0 ok 2008-Jul-25 04:28:13 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jul-25 04:28:13 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Jul-25 04:28:13 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 04:28:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:28:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:28:13 INFO1 WAPP=1+2+3+4-start_spectra: start sec 30494.00 2008-Jul-25 04:28:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2008-Jul-25 04:28:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jul-25 04:28:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 04:28:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 04:28:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 944.589620 MHz 2008-Jul-25 04:28:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 942.632164 MHz 2008-Jul-25 04:28:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Jul-25 04:28:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Jul-25 04:28:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1978.000000 MHz 2008-Jul-25 04:28:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2008-Jul-25 04:28:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2008-Jul-25 04:28:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2008-Jul-25 04:28:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2008-Jul-25 04:28:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2008-Jul-25 04:28:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jul-25 04:28:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2008-Jul-25 04:28:24 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jul-25 04:28:24 LOG5 end_task: Level: (4) ID = <10289> Status = 0 0 0 0 ok 2008-Jul-25 04:28:24 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jul-25 04:28:24 LOG5 end_task: Level: (3) ID = <10288> Status = 0 0 0 0 ok 2008-Jul-25 04:28:24 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2008-Jul-25 04:28:24 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2008-Jul-25 04:28:24 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2008-Jul-25 04:28:24 LOG5 antvel: Calling 'antvel 231050.300000 153326.600000 J 0' 2008-Jul-25 04:28:24 LOG2 antvel: Precessing RA = 23:10:50.3 Dec = +15:33:26.6 Epoch = 2008.56725 J 2008-Jul-25 04:28:24 LOG2 antvel: Computed apparent RA = 23:11:17.5 Dec = +15:36:18.2 2008-Jul-25 04:28:24 LOG2 antvel: Parameters to Doppler: Topocentric 30504 2008 207 0.0 2008-Jul-25 04:28:24 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Jul-25 04:28:24 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2008-Jul-25 04:28:24 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2008-Jul-25 04:28:24 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jul-25 04:28:24 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jul-25 04:28:24 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Jul-25 04:28:24 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 04:28:24 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Jul-25 04:28:24 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jul-25 04:28:24 LOG5 begin_task: Level: (3) ID = <10290> Status = 0 0 0 0 ok 2008-Jul-25 04:28:24 LOG5 log_alfabeam: Parameters: 23.180638888888886 15.557388888888891 0.251063 2008.5672454179025 18.999933 2008-Jul-25 04:28:24 LOG4 log_alfabeam: ALFABEAM 0 23.180638888888886 15.557388888888898 2008-Jul-25 04:28:24 LOG4 log_alfabeam: ALFABEAM 1 23.187456275030431 15.596921430664336 2008-Jul-25 04:28:24 LOG4 log_alfabeam: ALFABEAM 2 23.181711392762217 15.649143832059725 2008-Jul-25 04:28:24 LOG4 log_alfabeam: ALFABEAM 3 23.174882665487630 15.609924463162706 2008-Jul-25 04:28:24 LOG4 log_alfabeam: ALFABEAM 4 23.173828863777967 15.517588861949463 2008-Jul-25 04:28:24 LOG4 log_alfabeam: ALFABEAM 5 23.179604753998660 15.465365501343092 2008-Jul-25 04:28:24 LOG4 log_alfabeam: ALFABEAM 6 23.186403337769370 15.505477933166926 2008-Jul-25 04:28:24 INFO2 take_data: Starting WAPP+GALFA scan: 820700036 2008-Jul-25 04:28:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jul-25 04:28:25 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jul-25 04:28:25 LOG5 begin_task: Level: (4) ID = <10291> Status = 0 0 0 0 ok 2008-Jul-25 04:28:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jul-25 04:28:25 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Jul-25 04:28:25 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 04:28:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:28:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:28:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 30506.00 2008-Jul-25 04:28:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2008-Jul-25 04:28:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jul-25 04:28:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 04:28:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 04:28:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 944.589620 MHz 2008-Jul-25 04:28:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 942.632164 MHz 2008-Jul-25 04:28:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Jul-25 04:28:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Jul-25 04:28:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1978.000000 MHz 2008-Jul-25 04:28:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2008-Jul-25 04:28:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2008-Jul-25 04:28:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2008-Jul-25 04:28:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2008-Jul-25 04:28:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2008-Jul-25 04:28:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jul-25 04:28:36 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jul-25 04:28:36 LOG5 end_task: Level: (4) ID = <10291> Status = 0 0 0 0 ok 2008-Jul-25 04:28:36 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jul-25 04:28:36 LOG5 end_task: Level: (3) ID = <10290> Status = 0 0 0 0 ok 2008-Jul-25 04:28:36 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2008-Jul-25 04:28:36 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2008-Jul-25 04:28:36 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2008-Jul-25 04:28:36 LOG5 antvel: Calling 'antvel 231050.300000 153326.600000 J 0' 2008-Jul-25 04:28:36 LOG2 antvel: Precessing RA = 23:10:50.3 Dec = +15:33:26.6 Epoch = 2008.56725 J 2008-Jul-25 04:28:36 LOG2 antvel: Computed apparent RA = 23:11:17.5 Dec = +15:36:18.2 2008-Jul-25 04:28:36 LOG2 antvel: Parameters to Doppler: Topocentric 30516 2008 207 0.0 2008-Jul-25 04:28:36 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Jul-25 04:28:36 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2008-Jul-25 04:28:36 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2008-Jul-25 04:28:36 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jul-25 04:28:36 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jul-25 04:28:36 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Jul-25 04:28:36 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 04:28:36 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Jul-25 04:28:36 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jul-25 04:28:36 LOG5 begin_task: Level: (3) ID = <10292> Status = 0 0 0 0 ok 2008-Jul-25 04:28:36 LOG5 log_alfabeam: Parameters: 23.180638888888886 15.557388888888891 0.254406 2008.5672457981595 18.999933 2008-Jul-25 04:28:36 LOG4 log_alfabeam: ALFABEAM 0 23.180638888888886 15.557388888888887 2008-Jul-25 04:28:36 LOG4 log_alfabeam: ALFABEAM 1 23.187457417825339 15.596880317810903 2008-Jul-25 04:28:36 LOG4 log_alfabeam: ALFABEAM 2 23.181714006675630 15.649137731183654 2008-Jul-25 04:28:36 LOG4 log_alfabeam: ALFABEAM 3 23.174884177889577 15.609958417005016 2008-Jul-25 04:28:36 LOG4 log_alfabeam: ALFABEAM 4 23.173827697193854 15.517630632621435 2008-Jul-25 04:28:36 LOG4 log_alfabeam: ALFABEAM 5 23.179602015341242 15.465372221697653 2008-Jul-25 04:28:36 LOG4 log_alfabeam: ALFABEAM 6 23.186401807751523 15.505441831152002 2008-Jul-25 04:28:36 INFO2 take_data: Starting WAPP+GALFA scan: 820700037 2008-Jul-25 04:28:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jul-25 04:28:37 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jul-25 04:28:37 LOG5 begin_task: Level: (4) ID = <10293> Status = 0 0 0 0 ok 2008-Jul-25 04:28:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jul-25 04:28:37 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Jul-25 04:28:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2008-Jul-25 04:28:37 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 04:28:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:28:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:28:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 30518.00 2008-Jul-25 04:28:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jul-25 04:28:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 04:28:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 04:28:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 944.589620 MHz 2008-Jul-25 04:28:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 942.632164 MHz 2008-Jul-25 04:28:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Jul-25 04:28:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Jul-25 04:28:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1978.000000 MHz 2008-Jul-25 04:28:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2008-Jul-25 04:28:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2008-Jul-25 04:28:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2008-Jul-25 04:28:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2008-Jul-25 04:28:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2008-Jul-25 04:28:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 04:28:47 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 0.991 0.921 2008-Jul-25 04:28:47 LOG4 check_wapp_levels: WAPP-2 power levels: 0.070 0.014 0.014 0.040 2008-Jul-25 04:28:47 LOG4 check_wapp_levels: WAPP-3 power levels: 0.111 0.014 0.026 0.014 2008-Jul-25 04:28:47 LOG4 check_wapp_levels: WAPP-4 power levels: 1.057 0.981 0.922 1.091 2008-Jul-25 04:28:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jul-25 04:28:48 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jul-25 04:28:48 LOG5 end_task: Level: (4) ID = <10293> Status = 0 0 0 0 ok 2008-Jul-25 04:28:48 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jul-25 04:28:48 LOG5 end_task: Level: (3) ID = <10292> Status = 0 0 0 0 ok 2008-Jul-25 04:28:48 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2008-Jul-25 04:28:48 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Jul-25 04:28:48 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Jul-25 04:28:48 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jul-25 04:28:48 LOG5 begin_task: Level: (3) ID = <10294> Status = 0 0 0 0 ok 2008-Jul-25 04:28:48 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jul-25 04:28:48 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Jul-25 04:28:48 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jul-25 04:28:48 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jul-25 04:28:48 LOG5 end_task: Level: (3) ID = <10294> Status = 0 0 0 0 ok 2008-Jul-25 04:28:48 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2008-Jul-25 04:28:48 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2008-Jul-25 04:28:48 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2008-Jul-25 04:28:48 LOG5 antvel: Calling 'antvel 231050.300000 153326.600000 J 0' 2008-Jul-25 04:28:48 LOG2 antvel: Precessing RA = 23:10:50.3 Dec = +15:33:26.6 Epoch = 2008.56725 J 2008-Jul-25 04:28:48 LOG2 antvel: Computed apparent RA = 23:11:17.5 Dec = +15:36:18.2 2008-Jul-25 04:28:48 LOG2 antvel: Parameters to Doppler: Topocentric 30528 2008 207 0.0 2008-Jul-25 04:28:48 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Jul-25 04:28:48 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2008-Jul-25 04:28:48 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2008-Jul-25 04:28:48 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jul-25 04:28:48 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jul-25 04:28:48 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Jul-25 04:28:48 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 04:28:48 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Jul-25 04:28:48 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jul-25 04:28:48 LOG5 begin_task: Level: (3) ID = <10295> Status = 0 0 0 0 ok 2008-Jul-25 04:28:48 LOG5 log_alfabeam: Parameters: 23.180638888888886 15.557388888888891 0.257748 2008.5672461784166 18.999933 2008-Jul-25 04:28:48 LOG4 log_alfabeam: ALFABEAM 0 23.180638888888886 15.557388888888893 2008-Jul-25 04:28:48 LOG4 log_alfabeam: ALFABEAM 1 23.187458550057048 15.596839536116473 2008-Jul-25 04:28:48 LOG4 log_alfabeam: ALFABEAM 2 23.181716598858898 15.649131665899027 2008-Jul-25 04:28:48 LOG4 log_alfabeam: ALFABEAM 3 23.174885678795849 15.609992081153029 2008-Jul-25 04:28:48 LOG4 log_alfabeam: ALFABEAM 4 23.173826541374282 15.517672068445139 2008-Jul-25 04:28:48 LOG4 log_alfabeam: ALFABEAM 5 23.179599299229036 15.465378904634886 2008-Jul-25 04:28:48 LOG4 log_alfabeam: ALFABEAM 6 23.186400289178462 15.505406032373447 2008-Jul-25 04:28:48 INFO2 take_data: Starting WAPP+GALFA scan: 820700038 2008-Jul-25 04:28:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jul-25 04:28:49 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jul-25 04:28:49 LOG5 begin_task: Level: (4) ID = <10296> Status = 0 0 0 0 ok 2008-Jul-25 04:28:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jul-25 04:28:49 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Jul-25 04:28:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 04:28:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:28:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:28:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2008-Jul-25 04:28:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 30530.00 2008-Jul-25 04:28:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jul-25 04:28:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 04:28:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 04:28:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 944.589620 MHz 2008-Jul-25 04:28:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 942.632164 MHz 2008-Jul-25 04:28:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Jul-25 04:28:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Jul-25 04:28:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1978.000000 MHz 2008-Jul-25 04:28:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2008-Jul-25 04:28:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.396 (still bad) 2008-Jul-25 04:28:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.518 (still bad) 2008-Jul-25 04:28:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.515 (still bad) 2008-Jul-25 04:28:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.524 (still bad) 2008-Jul-25 04:28:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.516 (still bad) 2008-Jul-25 04:29:00 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jul-25 04:29:00 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jul-25 04:29:00 LOG5 end_task: Level: (4) ID = <10296> Status = 0 0 0 0 ok 2008-Jul-25 04:29:00 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jul-25 04:29:00 LOG5 end_task: Level: (3) ID = <10295> Status = 0 0 0 0 ok 2008-Jul-25 04:29:00 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2008-Jul-25 04:29:00 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2008-Jul-25 04:29:00 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2008-Jul-25 04:29:00 LOG5 antvel: Calling 'antvel 231050.300000 153326.600000 J 0' 2008-Jul-25 04:29:00 LOG2 antvel: Precessing RA = 23:10:50.3 Dec = +15:33:26.6 Epoch = 2008.56725 J 2008-Jul-25 04:29:00 LOG2 antvel: Computed apparent RA = 23:11:17.5 Dec = +15:36:18.2 2008-Jul-25 04:29:00 LOG2 antvel: Parameters to Doppler: Topocentric 30540 2008 207 0.0 2008-Jul-25 04:29:00 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Jul-25 04:29:00 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2008-Jul-25 04:29:00 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2008-Jul-25 04:29:00 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jul-25 04:29:00 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jul-25 04:29:00 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Jul-25 04:29:00 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 04:29:00 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Jul-25 04:29:00 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jul-25 04:29:00 LOG5 begin_task: Level: (3) ID = <10297> Status = 0 0 0 0 ok 2008-Jul-25 04:29:00 LOG5 log_alfabeam: Parameters: 23.180638888888886 15.557388888888891 0.261091 2008.5672465586738 18.999933 2008-Jul-25 04:29:00 LOG4 log_alfabeam: ALFABEAM 0 23.180638888888890 15.557388888888893 2008-Jul-25 04:29:00 LOG4 log_alfabeam: ALFABEAM 1 23.187459672511309 15.596799058443272 2008-Jul-25 04:29:00 LOG4 log_alfabeam: ALFABEAM 2 23.181719171051959 15.649125632504411 2008-Jul-25 04:29:00 LOG4 log_alfabeam: ALFABEAM 3 23.174887169188615 15.610025478370609 2008-Jul-25 04:29:00 LOG4 log_alfabeam: ALFABEAM 4 23.173825395517245 15.517713196977089 2008-Jul-25 04:29:00 LOG4 log_alfabeam: ALFABEAM 5 23.179596603840707 15.465385554222118 2008-Jul-25 04:29:00 LOG4 log_alfabeam: ALFABEAM 6 23.186398781059410 15.505370512674439 2008-Jul-25 04:29:00 INFO2 take_data: Starting WAPP+GALFA scan: 820700039 2008-Jul-25 04:29:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jul-25 04:29:01 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jul-25 04:29:01 LOG5 begin_task: Level: (4) ID = <10298> Status = 0 0 0 0 ok 2008-Jul-25 04:29:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jul-25 04:29:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Jul-25 04:29:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 04:29:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:29:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:29:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 30542.00 2008-Jul-25 04:29:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.522 (still bad) 2008-Jul-25 04:29:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jul-25 04:29:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 04:29:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 04:29:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 944.589620 MHz 2008-Jul-25 04:29:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 942.632164 MHz 2008-Jul-25 04:29:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Jul-25 04:29:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Jul-25 04:29:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1978.000000 MHz 2008-Jul-25 04:29:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2008-Jul-25 04:29:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.493 (still bad) 2008-Jul-25 04:29:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.489 (still bad) 2008-Jul-25 04:29:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.491 (still bad) 2008-Jul-25 04:29:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.490 (still bad) 2008-Jul-25 04:29:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.489 (still bad) 2008-Jul-25 04:29:12 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jul-25 04:29:12 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jul-25 04:29:12 LOG5 end_task: Level: (4) ID = <10298> Status = 0 0 0 0 ok 2008-Jul-25 04:29:12 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jul-25 04:29:12 LOG5 end_task: Level: (3) ID = <10297> Status = 0 0 0 0 ok 2008-Jul-25 04:29:12 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2008-Jul-25 04:29:12 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2008-Jul-25 04:29:12 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2008-Jul-25 04:29:12 LOG5 antvel: Calling 'antvel 231050.300000 153326.600000 J 0' 2008-Jul-25 04:29:12 LOG2 antvel: Precessing RA = 23:10:50.3 Dec = +15:33:26.6 Epoch = 2008.56725 J 2008-Jul-25 04:29:12 LOG2 antvel: Computed apparent RA = 23:11:17.5 Dec = +15:36:18.2 2008-Jul-25 04:29:12 LOG2 antvel: Parameters to Doppler: Topocentric 30552 2008 207 0.0 2008-Jul-25 04:29:12 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Jul-25 04:29:12 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2008-Jul-25 04:29:12 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2008-Jul-25 04:29:12 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jul-25 04:29:12 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jul-25 04:29:12 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Jul-25 04:29:12 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 04:29:12 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Jul-25 04:29:12 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jul-25 04:29:12 LOG5 begin_task: Level: (3) ID = <10299> Status = 0 0 0 0 ok 2008-Jul-25 04:29:12 LOG5 log_alfabeam: Parameters: 23.180638888888886 15.557388888888891 0.264433 2008.5672469389308 18.999933 2008-Jul-25 04:29:12 LOG4 log_alfabeam: ALFABEAM 0 23.180638888888883 15.557388888888880 2008-Jul-25 04:29:12 LOG4 log_alfabeam: ALFABEAM 1 23.187460784623280 15.596758906307235 2008-Jul-25 04:29:12 LOG4 log_alfabeam: ALFABEAM 2 23.181721721902314 15.649119634535648 2008-Jul-25 04:29:12 LOG4 log_alfabeam: ALFABEAM 3 23.174888648259305 15.610058591261760 2008-Jul-25 04:29:12 LOG4 log_alfabeam: ALFABEAM 4 23.173824260199474 15.517753996338957 2008-Jul-25 04:29:12 LOG4 log_alfabeam: ALFABEAM 5 23.179593930595303 15.465392166551577 2008-Jul-25 04:29:12 LOG4 log_alfabeam: ALFABEAM 6 23.186397284215399 15.505335290606656 2008-Jul-25 04:29:12 INFO2 take_data: Starting WAPP+GALFA scan: 820700040 2008-Jul-25 04:29:13 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jul-25 04:29:13 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jul-25 04:29:13 LOG5 begin_task: Level: (4) ID = <10300> Status = 0 0 0 0 ok 2008-Jul-25 04:29:13 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jul-25 04:29:13 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Jul-25 04:29:13 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 04:29:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:29:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:29:13 INFO1 WAPP=1+2+3+4-start_spectra: start sec 30554.00 2008-Jul-25 04:29:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.490 (still bad) 2008-Jul-25 04:29:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jul-25 04:29:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 04:29:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 04:29:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 944.589620 MHz 2008-Jul-25 04:29:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 942.632164 MHz 2008-Jul-25 04:29:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Jul-25 04:29:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Jul-25 04:29:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1978.000000 MHz 2008-Jul-25 04:29:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2008-Jul-25 04:29:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.494 (still bad) 2008-Jul-25 04:29:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.489 (still bad) 2008-Jul-25 04:29:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.491 (still bad) 2008-Jul-25 04:29:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.490 (still bad) 2008-Jul-25 04:29:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jul-25 04:29:24 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jul-25 04:29:24 LOG5 end_task: Level: (4) ID = <10300> Status = 0 0 0 0 ok 2008-Jul-25 04:29:24 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jul-25 04:29:24 LOG5 end_task: Level: (3) ID = <10299> Status = 0 0 0 0 ok 2008-Jul-25 04:29:24 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2008-Jul-25 04:29:24 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2008-Jul-25 04:29:24 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2008-Jul-25 04:29:24 LOG5 antvel: Calling 'antvel 231050.300000 153326.600000 J 0' 2008-Jul-25 04:29:24 LOG2 antvel: Precessing RA = 23:10:50.3 Dec = +15:33:26.6 Epoch = 2008.56725 J 2008-Jul-25 04:29:24 LOG2 antvel: Computed apparent RA = 23:11:17.5 Dec = +15:36:18.2 2008-Jul-25 04:29:24 LOG2 antvel: Parameters to Doppler: Topocentric 30564 2008 207 0.0 2008-Jul-25 04:29:24 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Jul-25 04:29:24 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2008-Jul-25 04:29:24 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2008-Jul-25 04:29:24 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jul-25 04:29:24 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jul-25 04:29:24 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Jul-25 04:29:24 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 04:29:24 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Jul-25 04:29:24 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jul-25 04:29:24 LOG5 begin_task: Level: (3) ID = <10301> Status = 0 0 0 0 ok 2008-Jul-25 04:29:24 LOG5 log_alfabeam: Parameters: 23.180638888888886 15.557388888888891 0.267776 2008.5672473191878 18.999933 2008-Jul-25 04:29:24 LOG4 log_alfabeam: ALFABEAM 0 23.180638888888879 15.557388888888887 2008-Jul-25 04:29:24 LOG4 log_alfabeam: ALFABEAM 1 23.187461887163728 15.596719053008425 2008-Jul-25 04:29:24 LOG4 log_alfabeam: ALFABEAM 2 23.181724253120723 15.649113668327578 2008-Jul-25 04:29:24 LOG4 log_alfabeam: ALFABEAM 3 23.174890116975448 15.610091442196270 2008-Jul-25 04:29:24 LOG4 log_alfabeam: ALFABEAM 4 23.173823134634240 15.517794493644869 2008-Jul-25 04:29:24 LOG4 log_alfabeam: ALFABEAM 5 23.179591277701789 15.465398745653049 2008-Jul-25 04:29:24 LOG4 log_alfabeam: ALFABEAM 6 23.186395797670180 15.505300342425340 2008-Jul-25 04:29:24 INFO2 take_data: Starting WAPP+GALFA scan: 820700041 2008-Jul-25 04:29:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jul-25 04:29:25 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jul-25 04:29:25 LOG5 begin_task: Level: (4) ID = <10302> Status = 0 0 0 0 ok 2008-Jul-25 04:29:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jul-25 04:29:25 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Jul-25 04:29:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.489 (still bad) 2008-Jul-25 04:29:25 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 04:29:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:29:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:29:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 30566.00 2008-Jul-25 04:29:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jul-25 04:29:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 04:29:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 04:29:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 944.589620 MHz 2008-Jul-25 04:29:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 942.632164 MHz 2008-Jul-25 04:29:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Jul-25 04:29:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Jul-25 04:29:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1978.000000 MHz 2008-Jul-25 04:29:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2008-Jul-25 04:29:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.491 (still bad) 2008-Jul-25 04:29:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.489 (still bad) 2008-Jul-25 04:29:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.488 (still bad) 2008-Jul-25 04:29:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.494 (still bad) 2008-Jul-25 04:29:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.489 (still bad) 2008-Jul-25 04:29:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jul-25 04:29:36 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jul-25 04:29:36 LOG5 end_task: Level: (4) ID = <10302> Status = 0 0 0 0 ok 2008-Jul-25 04:29:36 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jul-25 04:29:36 LOG5 end_task: Level: (3) ID = <10301> Status = 0 0 0 0 ok 2008-Jul-25 04:29:36 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2008-Jul-25 04:29:36 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2008-Jul-25 04:29:36 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2008-Jul-25 04:29:36 LOG5 antvel: Calling 'antvel 231050.300000 153326.600000 J 0' 2008-Jul-25 04:29:36 LOG2 antvel: Precessing RA = 23:10:50.3 Dec = +15:33:26.6 Epoch = 2008.56725 J 2008-Jul-25 04:29:36 LOG2 antvel: Computed apparent RA = 23:11:17.5 Dec = +15:36:18.2 2008-Jul-25 04:29:36 LOG2 antvel: Parameters to Doppler: Topocentric 30576 2008 207 0.0 2008-Jul-25 04:29:36 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Jul-25 04:29:36 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2008-Jul-25 04:29:36 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2008-Jul-25 04:29:36 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jul-25 04:29:36 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jul-25 04:29:36 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Jul-25 04:29:36 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 04:29:36 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Jul-25 04:29:36 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jul-25 04:29:36 LOG5 begin_task: Level: (3) ID = <10303> Status = 0 0 0 0 ok 2008-Jul-25 04:29:36 LOG5 log_alfabeam: Parameters: 23.180638888888886 15.557388888888891 0.271118 2008.5672476994448 18.999933 2008-Jul-25 04:29:36 LOG4 log_alfabeam: ALFABEAM 0 23.180638888888883 15.557388888888880 2008-Jul-25 04:29:36 LOG4 log_alfabeam: ALFABEAM 1 23.187462979576818 15.596679519749399 2008-Jul-25 04:29:36 LOG4 log_alfabeam: ALFABEAM 2 23.181726763374805 15.649107737371928 2008-Jul-25 04:29:36 LOG4 log_alfabeam: ALFABEAM 3 23.174891574539910 15.610124014041668 2008-Jul-25 04:29:36 LOG4 log_alfabeam: ALFABEAM 4 23.173822019389114 15.517834667333462 2008-Jul-25 04:29:36 LOG4 log_alfabeam: ALFABEAM 5 23.179588646558347 15.465405287665289 2008-Jul-25 04:29:36 LOG4 log_alfabeam: ALFABEAM 6 23.186394322233376 15.505265686406153 2008-Jul-25 04:29:36 INFO2 take_data: Starting WAPP+GALFA scan: 820700042 2008-Jul-25 04:29:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jul-25 04:29:37 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jul-25 04:29:37 LOG5 begin_task: Level: (4) ID = <10304> Status = 0 0 0 0 ok 2008-Jul-25 04:29:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jul-25 04:29:37 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Jul-25 04:29:37 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 04:29:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:29:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:29:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.492 (still bad) 2008-Jul-25 04:29:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 30578.00 2008-Jul-25 04:29:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jul-25 04:29:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 04:29:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 04:29:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 944.589620 MHz 2008-Jul-25 04:29:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 942.632164 MHz 2008-Jul-25 04:29:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Jul-25 04:29:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Jul-25 04:29:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1978.000000 MHz 2008-Jul-25 04:29:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2008-Jul-25 04:29:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.493 (still bad) 2008-Jul-25 04:29:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.489 (still bad) 2008-Jul-25 04:29:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.490 (still bad) 2008-Jul-25 04:29:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.489 (still bad) 2008-Jul-25 04:29:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.487 (still bad) 2008-Jul-25 04:29:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jul-25 04:29:48 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jul-25 04:29:48 LOG5 end_task: Level: (4) ID = <10304> Status = 0 0 0 0 ok 2008-Jul-25 04:29:48 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jul-25 04:29:48 LOG5 end_task: Level: (3) ID = <10303> Status = 0 0 0 0 ok 2008-Jul-25 04:29:48 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2008-Jul-25 04:29:48 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2008-Jul-25 04:29:48 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2008-Jul-25 04:29:48 LOG5 antvel: Calling 'antvel 231050.300000 153326.600000 J 0' 2008-Jul-25 04:29:48 LOG2 antvel: Precessing RA = 23:10:50.3 Dec = +15:33:26.6 Epoch = 2008.56725 J 2008-Jul-25 04:29:48 LOG2 antvel: Computed apparent RA = 23:11:17.5 Dec = +15:36:18.2 2008-Jul-25 04:29:48 LOG2 antvel: Parameters to Doppler: Topocentric 30588 2008 207 0.0 2008-Jul-25 04:29:48 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Jul-25 04:29:48 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2008-Jul-25 04:29:48 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2008-Jul-25 04:29:48 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jul-25 04:29:48 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jul-25 04:29:48 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Jul-25 04:29:48 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 04:29:48 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Jul-25 04:29:48 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jul-25 04:29:48 LOG5 begin_task: Level: (3) ID = <10305> Status = 0 0 0 0 ok 2008-Jul-25 04:29:48 LOG5 log_alfabeam: Parameters: 23.180638888888886 15.557388888888891 0.274460 2008.5672480797018 18.999933 2008-Jul-25 04:29:48 LOG4 log_alfabeam: ALFABEAM 0 23.180638888888883 15.557388888888887 2008-Jul-25 04:29:48 LOG4 log_alfabeam: ALFABEAM 1 23.187464062296147 15.596640291952220 2008-Jul-25 04:29:48 LOG4 log_alfabeam: ALFABEAM 2 23.181729253604537 15.649101839799492 2008-Jul-25 04:29:48 LOG4 log_alfabeam: ALFABEAM 3 23.174893021474340 15.610156319154871 2008-Jul-25 04:29:48 LOG4 log_alfabeam: ALFABEAM 4 23.173820914021558 15.517874532202081 2008-Jul-25 04:29:48 LOG4 log_alfabeam: ALFABEAM 5 23.179586036181593 15.465411794638488 2008-Jul-25 04:29:48 LOG4 log_alfabeam: ALFABEAM 6 23.186392857379769 15.505231309452761 2008-Jul-25 04:29:48 INFO2 take_data: Starting WAPP+GALFA scan: 820700043 2008-Jul-25 04:29:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jul-25 04:29:49 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jul-25 04:29:49 LOG5 begin_task: Level: (4) ID = <10306> Status = 0 0 0 0 ok 2008-Jul-25 04:29:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jul-25 04:29:49 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Jul-25 04:29:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 04:29:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:29:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:29:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 30590.00 2008-Jul-25 04:29:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-25 04:29:50 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 1.318 1.223 2008-Jul-25 04:29:50 LOG4 check_wapp_levels: WAPP-2 power levels: 0.088 0.014 0.014 0.051 2008-Jul-25 04:29:50 LOG4 check_wapp_levels: WAPP-3 power levels: 0.152 0.014 0.026 0.014 2008-Jul-25 04:29:50 LOG4 check_wapp_levels: WAPP-4 power levels: 1.459 1.341 1.271 1.488 2008-Jul-25 04:29:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jul-25 04:29:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 04:29:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 04:29:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 944.589620 MHz 2008-Jul-25 04:29:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 942.632164 MHz 2008-Jul-25 04:29:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Jul-25 04:29:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Jul-25 04:29:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1978.000000 MHz 2008-Jul-25 04:29:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2008-Jul-25 04:29:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.490 (still bad) 2008-Jul-25 04:29:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.490 (still bad) 2008-Jul-25 04:29:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.491 (still bad) 2008-Jul-25 04:29:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.489 (still bad) 2008-Jul-25 04:30:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.490 (still bad) 2008-Jul-25 04:30:00 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jul-25 04:30:00 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jul-25 04:30:00 LOG5 end_task: Level: (4) ID = <10306> Status = 0 0 0 0 ok 2008-Jul-25 04:30:00 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jul-25 04:30:00 LOG5 end_task: Level: (3) ID = <10305> Status = 0 0 0 0 ok 2008-Jul-25 04:30:00 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2008-Jul-25 04:30:00 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2008-Jul-25 04:30:00 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2008-Jul-25 04:30:00 LOG5 antvel: Calling 'antvel 231050.300000 153326.600000 J 0' 2008-Jul-25 04:30:00 LOG2 antvel: Precessing RA = 23:10:50.3 Dec = +15:33:26.6 Epoch = 2008.56725 J 2008-Jul-25 04:30:00 LOG2 antvel: Computed apparent RA = 23:11:17.5 Dec = +15:36:18.2 2008-Jul-25 04:30:00 LOG2 antvel: Parameters to Doppler: Topocentric 30600 2008 207 0.0 2008-Jul-25 04:30:00 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Jul-25 04:30:00 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2008-Jul-25 04:30:00 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2008-Jul-25 04:30:00 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jul-25 04:30:00 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jul-25 04:30:00 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Jul-25 04:30:00 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 04:30:00 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Jul-25 04:30:00 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jul-25 04:30:00 LOG5 begin_task: Level: (3) ID = <10307> Status = 0 0 0 0 ok 2008-Jul-25 04:30:00 LOG5 log_alfabeam: Parameters: 23.180638888888886 15.557388888888891 0.277803 2008.567248459959 18.999933 2008-Jul-25 04:30:00 LOG4 log_alfabeam: ALFABEAM 0 23.180638888888886 15.557388888888896 2008-Jul-25 04:30:00 LOG4 log_alfabeam: ALFABEAM 1 23.187465135742318 15.596601355433695 2008-Jul-25 04:30:00 LOG4 log_alfabeam: ALFABEAM 2 23.181731724723811 15.649095973779277 2008-Jul-25 04:30:00 LOG4 log_alfabeam: ALFABEAM 3 23.174894458286978 15.610188369542948 2008-Jul-25 04:30:00 LOG4 log_alfabeam: ALFABEAM 4 23.173819818102263 15.517914102649058 2008-Jul-25 04:30:00 LOG4 log_alfabeam: ALFABEAM 5 23.179583445615226 15.465418268582958 2008-Jul-25 04:30:00 LOG4 log_alfabeam: ALFABEAM 6 23.186391402597518 15.505197198834688 2008-Jul-25 04:30:00 INFO2 take_data: Starting WAPP+GALFA scan: 820700044 2008-Jul-25 04:30:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jul-25 04:30:01 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jul-25 04:30:01 LOG5 begin_task: Level: (4) ID = <10308> Status = 0 0 0 0 ok 2008-Jul-25 04:30:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jul-25 04:30:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Jul-25 04:30:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 04:30:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:30:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:30:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 30602.00 2008-Jul-25 04:30:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.490 (still bad) 2008-Jul-25 04:30:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jul-25 04:30:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 04:30:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 997.767395 MHz 2008-Jul-25 04:30:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 944.589620 MHz 2008-Jul-25 04:30:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 942.632164 MHz 2008-Jul-25 04:30:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1600.000000 MHz 2008-Jul-25 04:30:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Jul-25 04:30:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1978.000000 MHz 2008-Jul-25 04:30:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2008-Jul-25 04:30:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.494 (still bad) 2008-Jul-25 04:30:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.492 (still bad) 2008-Jul-25 04:30:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.496 (still bad) 2008-Jul-25 04:30:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.492 (still bad) 2008-Jul-25 04:30:12 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jul-25 04:30:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.494 (still bad) 2008-Jul-25 04:30:12 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jul-25 04:30:12 LOG5 end_task: Level: (4) ID = <10308> Status = 0 0 0 0 ok 2008-Jul-25 04:30:12 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jul-25 04:30:12 LOG5 end_task: Level: (3) ID = <10307> Status = 0 0 0 0 ok 2008-Jul-25 04:30:12 INFO2 smartfreq: Switching off CAL 2008-Jul-25 04:30:12 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Jul-25 04:30:12 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Jul-25 04:30:12 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jul-25 04:30:12 LOG5 begin_task: Level: (3) ID = <10309> Status = 0 0 0 0 ok 2008-Jul-25 04:30:12 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jul-25 04:30:12 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jul-25 04:30:12 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jul-25 04:30:12 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jul-25 04:30:12 LOG5 end_task: Level: (3) ID = <10309> Status = 0 0 0 0 ok 2008-Jul-25 04:30:12 INFO3 restore_frequencies: Restoring original frequencies 2008-Jul-25 04:30:12 LOG5 antvel: Calling 'antvel 231050.300000 153326.600000 J 0' 2008-Jul-25 04:30:12 LOG2 antvel: Precessing RA = 23:10:50.3 Dec = +15:33:26.6 Epoch = 2008.56725 J 2008-Jul-25 04:30:12 LOG2 antvel: Computed apparent RA = 23:11:17.5 Dec = +15:36:18.2 2008-Jul-25 04:30:12 LOG2 antvel: Parameters to Doppler: Topocentric 30612 2008 207 0.0 2008-Jul-25 04:30:12 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Jul-25 04:30:12 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.2 rest0=1381.2 rest1=1381.2 rest2=1381.2 rest3=1381.2 rest4=1381.2 rest5=1381.2 rest6=1381.2 rest7=1381.2 2008-Jul-25 04:30:12 INFO4 dopset_gen: New sky frequencies: 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 2008-Jul-25 04:30:12 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.200000 sky0=1381.200000 sky1=1381.200000 sky2=1381.200000 sky3=1381.200000 sky4=1381.200000 sky5=1381.200000 sky6=1381.200000 sky7=1381.200000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jul-25 04:30:12 LOG2 dopset_gen: Result from 'sky2syn': 1631.200000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jul-25 04:30:12 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2008-Jul-25 04:30:12 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 04:30:12 STOP finish_task: Finishing task 'smart frequency switching' 2008-Jul-25 04:30:12 LOG5 finish_task: Level: (2) ID = <10240> Status = 0 0 0 0 ok 2008-Jul-25 04:30:12 DONE finish_task: DONE finished pattern: smart frequency switching 2008-Jul-25 04:30:12 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Jul-25 04:30:12 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2008-Jul-25 04:30:12 LOG5 end_task: Level: (2) ID = <10240> Status = 0 0 0 0 ok 2008-Jul-25 04:30:12 NOTE run_command_file: DONE with command file processing 2008-Jul-25 04:30:12 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2008-Jul-25 04:30:12 STOP finish_task: Finishing task 'running command file 'command_galfacurpos.cmd'' 2008-Jul-25 04:30:12 LOG5 finish_task: Level: (1) ID = <10224> Status = 0 0 0 0 ok 2008-Jul-25 04:30:12 DONE finish_task: DONE finished running: command file 'command_galfacurpos.cmd' 2008-Jul-25 04:30:13 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Jul-25 04:30:13 END end_task: Finishing task 'running command file 'command_galfacurpos.cmd'' with status 'OK' 2008-Jul-25 04:30:13 LOG5 end_task: Level: (1) ID = <10224> Status = 0 0 0 0 ok 2008-Jul-25 04:30:13 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2008-Jul-25 04:30:13 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-25 04:30:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:30:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:30:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.494 (still bad) 2008-Jul-25 04:30:49 ALERT CIMA-exit_cima: Exiting CIMA ... 2008-Jul-25 04:30:49 COMMAND CIMA-send_to_exec: Sending command to move interim correlator data 2008-Jul-25 04:30:49 LOG4 exec_msg: From OBSERVER: vw_send {mvdata a2048} 2008-Jul-25 04:30:49 LOG3 vw_send: To DATATAKING: mvdata a2048 2008-Jul-25 04:30:49 COMMAND CIMA-send_to_exec: Sending command to clear telescope offsets 2008-Jul-25 04:30:49 LOG4 exec_msg: From OBSERVER: vw_send {pnt c setoff 0 0} 2008-Jul-25 04:30:49 LOG3 vw_send: To DATATAKING: pnt c setoff 0 0 2008-Jul-25 04:30:49 NOTE CIMA-exit_cima: Cleaning up session ... 2008-Jul-25 04:30:49 LOG4 got_cormsg: From DATATAKING: mvdata a2048 2008-Jul-25 04:30:49 LOG4 got_cormsg: From DATATAKING: pnt c setoff 0 0 2008-Jul-25 04:30:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:30:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-25 04:30:52 LOG3 exec_msg: Closing socket