2008-Jul-24 01:33:14 BEGIN executive: CIMA executive starting ... 2008-Jul-24 01:33:14 NOTE executive: STARTING NEW CIMA SESSION 2008-Jul-24 01:33:14 INFO1 executive: Using CIMA version 3.0.00 'next' from 2008-06-12 15:50 2008-Jul-24 01:33:14 INFO4 executive: This is an ON-LINE session 2008-Jul-24 01:33:14 INFO4 executive: This is a REMOTE session 2008-Jul-24 01:33:14 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2008-Jul-24 01:33:14 INFO1 executive: CIMA session for project 'a2048' in 'line' mode for 'JID' 2008-Jul-24 01:33:14 INFO2 executive: Logging to '/share/obs4/usr/a2048/a2048.cimalog_20080724' 2008-Jul-24 01:33:15 LOG2 log_preferences: Currently applied preferences: 2008-Jul-24 01:33:15 LOG2 log_preferences: prefs(dailylog) = daily 2008-Jul-24 01:33:15 LOG2 log_preferences: prefs(offlinelog) = skip 2008-Jul-24 01:33:15 LOG2 log_preferences: prefs(datawindow) = ignore 2008-Jul-24 01:33:15 LOG2 log_preferences: prefs(limitwarning) = enabled 2008-Jul-24 01:33:15 LOG2 log_preferences: prefs(wappfailure) = abort 2008-Jul-24 01:33:15 LOG2 log_preferences: prefs(helpstyle) = stay-open 2008-Jul-24 01:33:15 LOG2 log_preferences: prefs(logcolours) = full 2008-Jul-24 01:33:15 LOG2 log_preferences: prefs(displaylevel) = INFO3 2008-Jul-24 01:33:15 LOG2 log_preferences: prefs(loglevel) = LOG5 2008-Jul-24 01:33:15 LOG2 log_preferences: prefs(displayformat) = short 2008-Jul-24 01:33:15 LOG2 log_preferences: prefs(logformat) = new 2008-Jul-24 01:33:15 LOG2 log_preferences: prefs(fontsize) = 4 2008-Jul-24 01:33:15 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2008-Jul-24 01:33:15 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2048 2008-Jul-24 01:33:15 ALERT executive: CIMA executive ready 2008-Jul-24 01:33:18 NOTE frontend: CIMA frontend ready 2008-Jul-24 01:33:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-24 01:33:18 LOG4 got_cormsg: From DATATAKING: setup 2008-Jul-24 01:33:25 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0x300002 2008-Jul-24 01:33:25 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0x300002' 2008-Jul-24 01:33:25 LOG4 got_cormsg: From DATATAKING: vw% io 2008-Jul-24 01:33:25 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2008-Jul-24 01:33:25 LOG4 got_cormsg: From DATATAKING: 2008-Jul-24 01:33:25 LOG4 got_cormsg: From DATATAKING: vw% tape stat 2008-Jul-24 01:33:25 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2008-Jul-24 01:33:25 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2008-Jul-24 01:33:25 LOG4 got_cormsg: From DATATAKING: vw% connectall 2008-Jul-24 01:33:25 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2008-Jul-24 01:33:25 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2008-Jul-24 01:33:25 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2008-Jul-24 01:33:25 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2008-Jul-24 01:33:25 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2008-Jul-24 01:33:25 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2008-Jul-24 01:33:25 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2008-Jul-24 01:33:25 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2008-Jul-24 01:33:25 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2048 2008-Jul-24 01:33:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-24 01:33:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-24 01:33:54 NOTE CIMA-load_config_file: Loading and applying configuration file 'ages_alfafu.conf' 2008-Jul-24 01:34:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Jul-24 01:34:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Jul-24 01:34:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Jul-24 01:34:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Jul-24 01:34:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Jul-24 01:34:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2008-Jul-24 01:34:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Jul-24 01:34:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786" 2008-Jul-24 01:34:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786" 2008-Jul-24 01:34:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786" 2008-Jul-24 01:34:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786" 2008-Jul-24 01:34:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786" 2008-Jul-24 01:34:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786" 2008-Jul-24 01:34:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786" 2008-Jul-24 01:34:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786" 2008-Jul-24 01:34:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786" 2008-Jul-24 01:34:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Jul-24 01:34:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Jul-24 01:34:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Jul-24 01:34:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Jul-24 01:34:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Jul-24 01:34:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Jul-24 01:34:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Jul-24 01:34:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Jul-24 01:34:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Jul-24 01:34:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Jul-24 01:34:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Jul-24 01:34:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Jul-24 01:34:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Jul-24 01:34:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2008-Jul-24 01:34:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Jul-24 01:34:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Jul-24 01:34:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Jul-24 01:34:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Jul-24 01:34:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Jul-24 01:34:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Jul-24 01:34:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Jul-24 01:34:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Jul-24 01:34:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Jul-24 01:34:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1670.405752" 2008-Jul-24 01:34:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Jul-24 01:34:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Jul-24 01:34:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Jul-24 01:34:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Jul-24 01:34:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Jul-24 01:34:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Jul-24 01:34:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Jul-24 01:34:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Jul-24 01:34:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Jul-24 01:34:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Jul-24 01:34:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Jul-24 01:34:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Jul-24 01:34:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Jul-24 01:34:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Jul-24 01:34:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Jul-24 01:34:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Jul-24 01:34:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Jul-24 01:34:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Jul-24 01:34:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Jul-24 01:34:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Jul-24 01:34:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Jul-24 01:34:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Jul-24 01:34:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Jul-24 01:34:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Jul-24 01:34:03 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2008-Jul-24 01:34:03 LOG4 exec_msg: From OBSERVER: config_iflo 2008-Jul-24 01:34:03 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Jul-24 01:34:03 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Jul-24 01:34:03 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Jul-24 01:34:03 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Jul-24 01:34:03 INFO1 config_iflo: Selecting receiver ALFA 2008-Jul-24 01:34:03 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2008-Jul-24 01:34:03 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2008-Jul-24 01:34:03 START begin_task: Starting task 'selecting receiver ALFA' 2008-Jul-24 01:34:03 LOG5 begin_task: Level: (2) ID = <10002> Status = 0 0 0 0 ok 2008-Jul-24 01:34:03 NOTE select_receiver: Starting to select receiver ALFA 2008-Jul-24 01:34:03 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Jul-24 01:34:03 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Jul-24 01:34:03 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Jul-24 01:34:03 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Jul-24 01:34:03 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Jul-24 01:34:03 LOG5 finish_task: Level: (2) ID = <10002> Status = 0 0 0 0 ok 2008-Jul-24 01:34:03 INFO2 finish_task: DONE finished selecting: receiver ALFA 2008-Jul-24 01:34:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-24 01:34:03 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Jul-24 01:34:03 LOG5 end_task: Level: (2) ID = <10002> Status = 0 0 0 0 ok 2008-Jul-24 01:34:03 START begin_task: Starting task 'waiting for receiver ALFA' 2008-Jul-24 01:34:03 LOG5 begin_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2008-Jul-24 01:34:03 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2008-Jul-24 01:34:03 LOG5 end_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2008-Jul-24 01:34:03 INFO1 config_iflo: Configuring rest of the IF/LO path 2008-Jul-24 01:34:03 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2008-Jul-24 01:34:03 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jul-24 01:34:03 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Jul-24 01:34:03 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jul-24 01:34:03 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Jul-24 01:34:03 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jul-24 01:34:03 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jul-24 01:34:03 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Jul-24 01:34:03 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jul-24 01:34:03 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Jul-24 01:34:03 LOG3 vw_send: To DATATAKING: alfafb 1 2008-Jul-24 01:34:03 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2008-Jul-24 01:34:03 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Jul-24 01:34:03 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Jul-24 01:34:03 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2008-Jul-24 01:34:03 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2008-Jul-24 01:34:03 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2008-Jul-24 01:34:03 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1670405752.0} 2008-Jul-24 01:34:03 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2008-Jul-24 01:34:03 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2008-Jul-24 01:34:03 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Jul-24 01:34:03 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Jul-24 01:34:03 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Jul-24 01:34:03 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Jul-24 01:34:03 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Jul-24 01:34:03 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2008-Jul-24 01:34:03 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2008-Jul-24 01:34:03 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2008-Jul-24 01:34:03 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2008-Jul-24 01:34:03 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Jul-24 01:34:03 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2008-Jul-24 01:34:03 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Jul-24 01:34:03 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Jul-24 01:34:03 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-24 01:34:03 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Jul-24 01:34:03 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2008-Jul-24 01:34:03 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Jul-24 01:34:03 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2008-Jul-24 01:34:03 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2008-Jul-24 01:34:03 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Jul-24 01:34:03 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jul-24 01:34:03 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Jul-24 01:34:03 LOG5 begin_task: Level: (2) ID = <10005> Status = 0 0 0 0 ok 2008-Jul-24 01:34:03 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Jul-24 01:34:03 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Jul-24 01:34:03 LOG4 got_cormsg: From DATATAKING: alfafb 1 2008-Jul-24 01:34:03 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2008-Jul-24 01:34:03 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2008-Jul-24 01:34:03 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2008-Jul-24 01:34:03 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2008-Jul-24 01:34:03 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1670405752.0} 2008-Jul-24 01:34:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2008-Jul-24 01:34:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2008-Jul-24 01:34:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2008-Jul-24 01:34:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2008-Jul-24 01:34:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2008-Jul-24 01:34:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2008-Jul-24 01:34:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Jul-24 01:34:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2008-Jul-24 01:34:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Jul-24 01:34:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-24 01:34:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Jul-24 01:34:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2008-Jul-24 01:34:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2008-Jul-24 01:34:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2008-Jul-24 01:34:04 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jul-24 01:34:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-24 01:34:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-24 01:34:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-24 01:34:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-24 01:34:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-24 01:34:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-24 01:34:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-24 01:34:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-24 01:34:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-24 01:34:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-24 01:34:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-24 01:34:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-24 01:34:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-24 01:34:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-24 01:34:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-24 01:34:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-24 01:34:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-24 01:34:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-24 01:34:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-24 01:34:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-24 01:34:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-24 01:34:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-24 01:34:19 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jul-24 01:34:19 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Jul-24 01:34:19 LOG5 end_task: Level: (2) ID = <10005> Status = 0 0 0 0 ok 2008-Jul-24 01:34:19 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Jul-24 01:34:19 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Jul-24 01:34:19 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Jul-24 01:34:19 DONE finish_task: DONE finished configuration: IF/LO path 2008-Jul-24 01:34:19 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Jul-24 01:34:20 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Jul-24 01:34:20 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Jul-24 01:34:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-24 01:34:20 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Jul-24 01:34:20 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Jul-24 01:34:20 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Jul-24 01:34:20 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Jul-24 01:34:20 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Jul-24 01:34:20 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Jul-24 01:34:20 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Jul-24 01:34:20 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Jul-24 01:34:20 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Jul-24 01:34:20 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Jul-24 01:34:20 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Jul-24 01:34:20 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Jul-24 01:34:20 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Jul-24 01:34:20 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Jul-24 01:34:20 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Jul-24 01:34:20 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2008-Jul-24 01:34:20 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2008-Jul-24 01:34:20 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Jul-24 01:34:20 LOG5 begin_task: Level: (1) ID = <10006> Status = 0 0 0 0 ok 2008-Jul-24 01:34:20 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Jul-24 01:34:20 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Jul-24 01:34:20 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2008-Jul-24 01:34:20 START begin_task: Starting task 'selecting calibration port' 2008-Jul-24 01:34:20 LOG5 begin_task: Level: (2) ID = <10007> Status = 0 0 0 0 ok 2008-Jul-24 01:34:20 LOG3 vw_send: To DATATAKING: calport 3 2008-Jul-24 01:34:20 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Jul-24 01:34:20 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jul-24 01:34:20 START begin_task: Starting task 'waiting on calport' 2008-Jul-24 01:34:20 LOG5 begin_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2008-Jul-24 01:34:20 LOG5 CIMA-load_config_file: ALFA is already centered on beam 0. 2008-Jul-24 01:34:20 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Jul-24 01:34:20 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jul-24 01:34:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-24 01:34:20 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jul-24 01:34:20 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Jul-24 01:34:20 LOG5 end_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2008-Jul-24 01:34:20 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Jul-24 01:34:20 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Jul-24 01:34:20 LOG5 end_task: Level: (2) ID = <10007> Status = 0 0 0 0 ok 2008-Jul-24 01:34:20 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Jul-24 01:34:20 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Jul-24 01:34:21 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jul-24 01:34:21 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Jul-24 01:34:21 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jul-24 01:34:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-24 01:34:21 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jul-24 01:34:21 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jul-24 01:34:21 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jul-24 01:34:21 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Jul-24 01:34:21 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Jul-24 01:34:21 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Jul-24 01:34:21 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Jul-24 01:34:21 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Jul-24 01:34:21 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Jul-24 01:34:21 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Jul-24 01:34:21 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Jul-24 01:34:21 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Jul-24 01:34:21 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 JID 2008-Jul-24 01:34:21 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 JID 2008-Jul-24 01:34:21 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 JID 2008-Jul-24 01:34:21 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 JID 2008-Jul-24 01:34:21 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Jul-24 01:34:21 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Jul-24 01:34:21 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jul-24 01:34:21 LOG5 begin_task: Level: (2) ID = <10010> Status = 0 0 0 0 ok 2008-Jul-24 01:34:21 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jul-24 01:34:21 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jul-24 01:34:21 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jul-24 01:34:21 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jul-24 01:34:21 LOG5 end_task: Level: (2) ID = <10010> Status = 0 0 0 0 ok 2008-Jul-24 01:34:21 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 JID 2008-Jul-24 01:34:21 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 JID 2008-Jul-24 01:34:21 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 JID 2008-Jul-24 01:34:21 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 JID 2008-Jul-24 01:34:21 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Jul-24 01:34:21 LOG5 finish_task: Level: (1) ID = <10006> Status = 0 0 0 0 ok 2008-Jul-24 01:34:21 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Jul-24 01:34:21 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Jul-24 01:34:21 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Jul-24 01:34:21 LOG5 end_task: Level: (1) ID = <10006> Status = 0 0 0 0 ok 2008-Jul-24 01:34:21 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 JID' 2008-Jul-24 01:34:21 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2008-Jul-24 01:34:21 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Jul-24 01:34:21 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Jul-24 01:34:21 LOG4 exec_msg: From OBSERVER: rotate_alfa 0 nowait 2008-Jul-24 01:34:21 BEGIN begin_task: Starting task 'rotate ALFA to +0 degrees' 2008-Jul-24 01:34:21 LOG5 begin_task: Level: (1) ID = <10011> Status = 0 0 0 0 ok 2008-Jul-24 01:34:21 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +0 degrees ...} 2008-Jul-24 01:34:21 INFO2 rotate_alfa: ALFA commanded to +0.0 degrees 2008-Jul-24 01:34:21 LOG3 sock_errsend: To ALFAMOTOR: POSITION 0 REPLY 2008-Jul-24 01:34:21 STOP finish_task: Finishing task 'rotate ALFA to +0 degrees' 2008-Jul-24 01:34:21 LOG5 finish_task: Level: (1) ID = <10011> Status = 0 0 0 0 ok 2008-Jul-24 01:34:21 DONE finish_task: DONE finished configuration: rotating ALFA to +0 degrees 2008-Jul-24 01:34:21 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Jul-24 01:34:21 END end_task: Finishing task 'rotate ALFA to +0 degrees' with status 'OK' 2008-Jul-24 01:34:21 LOG5 end_task: Level: (1) ID = <10011> Status = 0 0 0 0 ok 2008-Jul-24 01:34:22 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 JID' 2008-Jul-24 01:34:22 NOTE WAPPDATA-new_file: New FITS file: wapp.20080724.a2048.0000.fits 2008-Jul-24 01:34:22 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20080724.a2048.0000.fits} 2008-Jul-24 01:34:31 NOTE CIMA-load_config_file: Configuration file 'ages_alfafu.conf' applied. 2008-Jul-24 01:34:55 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Jul-24 01:34:55 INFO3 alfa_motor: ALFA rotator in-position +0.00 degrees 2008-Jul-24 01:35:37 COMMAND CIMA-send_to_exec: Sending command to point to a source 2008-Jul-24 01:35:37 LOG4 exec_msg: From OBSERVER: track_new_source J223237+231205 223237.0 231205 J 0 0 main small /share/obs4/usr/a2048/n7332fu.cat 16619 Topocentric velocity(optical) 0 0 0 0 0 2008-Jul-24 01:35:37 LOG1 track_new_source: Calling 'track_new_source J223237+231205 223237.0 231205 J 0 0 main small /share/obs4/usr/a2048/n7332fu.cat 16619 Topocentric velocity(optical) 0 0 0 0 0' 2008-Jul-24 01:35:37 BEGIN begin_task: Starting task 'selecting new source' 2008-Jul-24 01:35:37 LOG5 begin_task: Level: (1) ID = <10012> Status = 0 0 0 0 ok 2008-Jul-24 01:35:37 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {J223237+231205} INFO {Selecting source 'J223237+231205' ...} 2008-Jul-24 01:35:37 LOG3 track_source: Calling 'track_source J223237+231205 223237.0 231205 J 0 0 main small /share/obs4/usr/a2048/n7332fu.cat 16619 Topocentric velocity(optical)' 2008-Jul-24 01:35:37 START begin_task: Starting task 'sending tracking commands' 2008-Jul-24 01:35:37 LOG5 begin_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2008-Jul-24 01:35:37 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {J223237+231205} INFO {Slewing to source 'J223237+231205' ...} 2008-Jul-24 01:35:37 INFO1 track_source: Starting to track J223237+231205 2008-Jul-24 01:35:37 LOG3 vw_send: To DATATAKING: hdrldsrcnm "J223237+231205" 2008-Jul-24 01:35:37 LOG3 vw_send: To DATATAKING: set ra 223237.0 2008-Jul-24 01:35:37 LOG3 vw_send: To DATATAKING: set dec 231205 2008-Jul-24 01:35:37 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Jul-24 01:35:37 LOG3 vw_send: To DATATAKING: pnt tr 223237.0 231205 -CJ 2008-Jul-24 01:35:37 LOG3 vw_send: To DATATAKING: dopsetvel 16619 topo 2008-Jul-24 01:35:37 STOP finish_task: Finishing task 'sending tracking commands' 2008-Jul-24 01:35:37 LOG5 finish_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2008-Jul-24 01:35:37 INFO2 finish_task: DONE finished sending: tracking commands 2008-Jul-24 01:35:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-24 01:35:37 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Jul-24 01:35:37 LOG5 end_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2008-Jul-24 01:35:37 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2008-Jul-24 01:35:37 START begin_task: Starting task 'applying pointing corrections' 2008-Jul-24 01:35:37 LOG5 begin_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2008-Jul-24 01:35:37 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2008-Jul-24 01:35:37 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2008-Jul-24 01:35:37 STOP finish_task: Finishing task 'applying pointing corrections' 2008-Jul-24 01:35:37 LOG5 finish_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2008-Jul-24 01:35:37 INFO2 finish_task: DONE finished applying: pointing corrections 2008-Jul-24 01:35:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-24 01:35:37 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2008-Jul-24 01:35:37 LOG5 end_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2008-Jul-24 01:35:37 STOP finish_task: Finishing task 'selecting new source' 2008-Jul-24 01:35:37 LOG5 finish_task: Level: (1) ID = <10012> Status = 0 0 0 0 ok 2008-Jul-24 01:35:37 DONE finish_task: DONE finished selecting: new source 2008-Jul-24 01:35:37 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Jul-24 01:35:37 END end_task: Finishing task 'selecting new source' with status 'OK' 2008-Jul-24 01:35:37 LOG5 end_task: Level: (1) ID = <10012> Status = 0 0 0 0 ok 2008-Jul-24 01:35:37 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "J223237+231205" 2008-Jul-24 01:35:37 LOG4 got_cormsg: From DATATAKING: set ra 223237.0 2008-Jul-24 01:35:37 LOG4 got_cormsg: From DATATAKING: set dec 231205 2008-Jul-24 01:35:37 LOG4 got_cormsg: From DATATAKING: vw% 223237.0 2008-Jul-24 01:35:37 LOG4 got_cormsg: From DATATAKING: vw% 231205 2008-Jul-24 01:35:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-24 01:35:37 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Jul-24 01:35:37 LOG4 got_cormsg: From DATATAKING: pnt tr 223237.0 231205 -CJ 2008-Jul-24 01:35:37 LOG4 got_cormsg: From DATATAKING: dopsetvel 16619 topo 2008-Jul-24 01:35:37 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Jul-24 01:35:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-24 01:35:37 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2008-Jul-24 01:35:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-24 01:35:55 COMMAND CIMA-send_to_exec: Sending command to run standard on/off 2008-Jul-24 01:35:55 LOG4 exec_msg: From OBSERVER: onoff 1 300 60 hcorcal 10 each first 0 2008-Jul-24 01:35:55 LOG1 onoff_wapp: Calling 'onoff_wapp 1 300 60 hcorcal 10 each first 0' 2008-Jul-24 01:35:55 BEGIN begin_task: Starting task 'standard on/off' 2008-Jul-24 01:35:55 LOG5 begin_task: Level: (1) ID = <10015> Status = 0 0 0 0 ok 2008-Jul-24 01:35:55 INFO4 begin_task: MAKING 'standard on/off' using 'alfa' + 'WAPP' on 'J223237+231205' 2008-Jul-24 01:35:55 INFO1 onoff_wapp: Starting pattern: Standard on/off 2008-Jul-24 01:35:55 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Standard on/off} TOTALLOOPS 1 INFO {Starting standard on/off observation ...} 2008-Jul-24 01:35:55 START begin_task: Starting task 'waiting on telescope' 2008-Jul-24 01:35:55 LOG5 begin_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2008-Jul-24 01:35:55 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Jul-24 01:35:55 LOG3 waittrk: Start waittrk 5 2008-Jul-24 01:35:55 START begin_task: Starting task 'waiting on telescope movement' 2008-Jul-24 01:35:55 LOG5 begin_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2008-Jul-24 01:36:00 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Jul-24 01:36:00 LOG5 end_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2008-Jul-24 01:36:00 START begin_task: Starting task 'waiting on telescope on source' 2008-Jul-24 01:36:00 LOG5 begin_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2008-Jul-24 01:40:17 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Jul-24 01:40:17 LOG5 end_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2008-Jul-24 01:40:17 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Jul-24 01:40:17 INFO2 waittrk: Now tracking J223237+231205 2008-Jul-24 01:40:17 LOG4 waittrk: Current telescope position: Az = 250.04 ZA = 17.19 2008-Jul-24 01:40:17 STOP finish_task: Finishing task 'waiting on telescope' 2008-Jul-24 01:40:17 LOG5 finish_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2008-Jul-24 01:40:17 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Jul-24 01:40:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-24 01:40:17 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Jul-24 01:40:17 LOG5 end_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2008-Jul-24 01:40:17 START begin_task: Starting task 'selecting calibration type' 2008-Jul-24 01:40:17 LOG5 begin_task: Level: (2) ID = <10019> Status = 0 0 0 0 ok 2008-Jul-24 01:40:17 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Jul-24 01:40:17 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Jul-24 01:40:17 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jul-24 01:40:17 START begin_task: Starting task 'waiting on setcal' 2008-Jul-24 01:40:17 LOG5 begin_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2008-Jul-24 01:40:17 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Jul-24 01:40:17 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jul-24 01:40:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-24 01:40:17 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jul-24 01:40:17 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Jul-24 01:40:17 LOG5 end_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2008-Jul-24 01:40:17 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Jul-24 01:40:17 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jul-24 01:40:17 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Jul-24 01:40:17 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jul-24 01:40:17 LOG5 begin_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2008-Jul-24 01:40:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-24 01:40:17 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jul-24 01:40:17 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jul-24 01:40:17 LOG5 end_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2008-Jul-24 01:40:17 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jul-24 01:40:17 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Jul-24 01:40:17 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jul-24 01:40:17 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Jul-24 01:40:17 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jul-24 01:40:17 LOG5 begin_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2008-Jul-24 01:40:17 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jul-24 01:40:17 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jul-24 01:40:17 LOG5 end_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2008-Jul-24 01:40:17 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jul-24 01:40:17 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Jul-24 01:40:17 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Jul-24 01:40:17 LOG5 end_task: Level: (2) ID = <10019> Status = 0 0 0 0 ok 2008-Jul-24 01:40:17 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 JID 2008-Jul-24 01:40:17 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 JID 2008-Jul-24 01:40:17 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 JID 2008-Jul-24 01:40:18 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 JID 2008-Jul-24 01:40:18 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20080724.a2048.0000.fits' is empty! 2008-Jul-24 01:40:18 INFO2 onoff_wapp: Starting standard on/off loop 1 of 1 2008-Jul-24 01:40:18 LOG4 send_obs_status: To obs_status: <1> LOOP 1 TOTALPARTS 2 PART 1 INFO {Making ON observation followed by OFF} 2008-Jul-24 01:40:18 START begin_task: Starting task 'clearing telescope offsets' 2008-Jul-24 01:40:18 LOG5 begin_task: Level: (2) ID = <10023> Status = 0 0 0 0 ok 2008-Jul-24 01:40:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Clearing Telescope Offsets} INFO {Removing telescope offsets ...} 2008-Jul-24 01:40:18 INFO3 clear_offsets: Removing telescope offsets 2008-Jul-24 01:40:18 LOG3 vw_send: To DATATAKING: hdrldsrcnm "J223237+231205" 2008-Jul-24 01:40:18 LOG3 vw_send: To DATATAKING: pnt tr 223237.000000 231205.000000 -CJ 2008-Jul-24 01:40:18 STOP finish_task: Finishing task 'clearing telescope offsets' 2008-Jul-24 01:40:18 LOG5 finish_task: Level: (2) ID = <10023> Status = 0 0 0 0 ok 2008-Jul-24 01:40:18 INFO2 finish_task: DONE finished clearing: telescope offsets 2008-Jul-24 01:40:18 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-24 01:40:18 STOP end_task: Finishing task 'clearing telescope offsets' with status 'OK' 2008-Jul-24 01:40:18 LOG5 end_task: Level: (2) ID = <10023> Status = 0 0 0 0 ok 2008-Jul-24 01:40:18 START begin_task: Starting task 'waiting on telescope' 2008-Jul-24 01:40:18 LOG5 begin_task: Level: (2) ID = <10024> Status = 0 0 0 0 ok 2008-Jul-24 01:40:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Jul-24 01:40:18 LOG3 waittrk: Start waittrk 5 2008-Jul-24 01:40:18 START begin_task: Starting task 'waiting on telescope movement' 2008-Jul-24 01:40:18 LOG5 begin_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2008-Jul-24 01:40:18 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "J223237+231205" 2008-Jul-24 01:40:18 LOG4 got_cormsg: From DATATAKING: pnt tr 223237.000000 231205.000000 -CJ 2008-Jul-24 01:40:18 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Jul-24 01:40:18 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 JID' 2008-Jul-24 01:40:23 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Jul-24 01:40:23 LOG5 end_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2008-Jul-24 01:40:23 START begin_task: Starting task 'waiting on telescope on source' 2008-Jul-24 01:40:23 LOG5 begin_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-Jul-24 01:40:25 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Jul-24 01:40:25 LOG5 end_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-Jul-24 01:40:25 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Jul-24 01:40:25 INFO2 waittrk: Now tracking J223237+231205 2008-Jul-24 01:40:25 LOG4 waittrk: Current telescope position: Az = 250.00 ZA = 17.16 2008-Jul-24 01:40:25 STOP finish_task: Finishing task 'waiting on telescope' 2008-Jul-24 01:40:25 LOG5 finish_task: Level: (2) ID = <10024> Status = 0 0 0 0 ok 2008-Jul-24 01:40:25 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Jul-24 01:40:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-24 01:40:25 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Jul-24 01:40:25 LOG5 end_task: Level: (2) ID = <10024> Status = 0 0 0 0 ok 2008-Jul-24 01:40:25 LOG5 antvel: Calling 'antvel 223237.000000 231205.000000 J 0' 2008-Jul-24 01:40:25 LOG2 antvel: Precessing RA = 22:32:37.0 Dec = +23:12:05.0 Epoch = 2008.56419 J 2008-Jul-24 01:40:25 LOG2 antvel: Computed apparent RA = 22:33:03.1 Dec = +23:14:45.6 2008-Jul-24 01:40:25 LOG2 antvel: Parameters to Doppler: Topocentric 20425 2008 206 0.0 2008-Jul-24 01:40:25 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Jul-24 01:40:25 LOG3 dopset_gen: Parameters for 'rest2sky': vel=16619.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Jul-24 01:40:25 INFO4 dopset_gen: New sky frequencies: 1345.801237 1345.801237 1345.801237 1345.801237 1345.801237 1345.801237 1345.801237 1345.801237 1345.801237 2008-Jul-24 01:40:25 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1345.801237 sky0=1345.801237 sky1=1345.801237 sky2=1345.801237 sky3=1345.801237 sky4=1345.801237 sky5=1345.801237 sky6=1345.801237 sky7=1345.801237 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jul-24 01:40:25 LOG2 dopset_gen: Result from 'sky2syn': 1595.801237 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jul-24 01:40:25 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1595801237.0} 2008-Jul-24 01:40:25 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-24 01:40:25 START begin_task: Starting task 'adjusting WAPP power' 2008-Jul-24 01:40:25 LOG5 begin_task: Level: (2) ID = <10027> Status = 0 0 0 0 ok 2008-Jul-24 01:40:25 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Jul-24 01:40:25 INFO2 adjust_power: Starting to adjust WAPP power 2008-Jul-24 01:40:25 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Jul-24 01:40:25 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Jul-24 01:40:25 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jul-24 01:40:25 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Jul-24 01:40:25 LOG5 begin_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2008-Jul-24 01:40:25 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1595801237.0} 2008-Jul-24 01:40:25 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-24 01:40:25 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Jul-24 01:40:25 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jul-24 01:40:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-24 01:40:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-24 01:40:28 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-24 01:40:28 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jul-24 01:40:28 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Jul-24 01:40:28 LOG5 end_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2008-Jul-24 01:40:28 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Jul-24 01:40:28 START begin_task: Starting task 'adjusting WAPP power' 2008-Jul-24 01:40:28 LOG5 begin_task: Level: (3) ID = <10029> Status = 0 0 0 0 ok 2008-Jul-24 01:40:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Jul-24 01:40:28 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Jul-24 01:40:28 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Jul-24 01:40:28 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Jul-24 01:40:28 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Jul-24 01:40:28 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Jul-24 01:40:28 LOG5 begin_task: Level: (4) ID = <10030> Status = 0 0 0 0 ok 2008-Jul-24 01:40:29 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Jul-24 01:40:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-24 01:40:29 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 0 0 dB --- beam 1: 6 1 dB 2008-Jul-24 01:40:29 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 0 dB --- beam 5: 0 0 dB 2008-Jul-24 01:40:29 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 0 0 dB --- beam 3: 0 0 dB 2008-Jul-24 01:40:29 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 2 dB --- beam 7: 2 2 dB 2008-Jul-24 01:40:29 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Jul-24 01:40:29 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Jul-24 01:40:29 LOG5 end_task: Level: (4) ID = <10030> Status = 0 0 0 0 ok 2008-Jul-24 01:40:29 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.022 0.018 ALFA beam 1: 1.051 0.990 2008-Jul-24 01:40:29 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.084 0.014 ALFA beam 3: 0.014 0.047 2008-Jul-24 01:40:29 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.136 0.014 ALFA beam 5: 0.025 0.014 2008-Jul-24 01:40:29 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.079 0.948 ALFA beam 7: 0.944 1.049 2008-Jul-24 01:40:29 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Jul-24 01:40:29 LOG5 finish_task: Level: (3) ID = <10029> Status = 0 0 0 0 ok 2008-Jul-24 01:40:29 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Jul-24 01:40:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-24 01:40:29 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Jul-24 01:40:29 LOG5 end_task: Level: (3) ID = <10029> Status = 0 0 0 0 ok 2008-Jul-24 01:40:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Jul-24 01:40:29 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Jul-24 01:40:29 LOG5 finish_task: Level: (2) ID = <10027> Status = 0 0 0 0 ok 2008-Jul-24 01:40:29 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Jul-24 01:40:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-24 01:40:29 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Jul-24 01:40:29 LOG5 end_task: Level: (2) ID = <10027> Status = 0 0 0 0 ok 2008-Jul-24 01:40:29 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_onoff_on MESSAGE {Taking ON scan ...} 2008-Jul-24 01:40:29 LOG4 take_data: Calling 'take_data 300 1 ONOFF ON -' 2008-Jul-24 01:40:29 START begin_task: Starting task 'WAPP spectral observation' 2008-Jul-24 01:40:29 LOG5 begin_task: Level: (2) ID = <10031> Status = 0 0 0 0 ok 2008-Jul-24 01:40:29 LOG5 log_alfabeam: Parameters: 22.543611111111112 23.201388888888889 21.379080 2008.5641883096307 0.000000 2008-Jul-24 01:40:29 LOG4 log_alfabeam: ALFABEAM 0 22.543611111111108 23.201388888888900 2008-Jul-24 01:40:29 LOG4 log_alfabeam: ALFABEAM 1 22.537847233635006 23.135864545544042 2008-Jul-24 01:40:29 LOG4 log_alfabeam: ALFABEAM 2 22.545117927629796 23.112377103289379 2008-Jul-24 01:40:29 LOG4 log_alfabeam: ALFABEAM 3 22.550892706176828 23.177868745039984 2008-Jul-24 01:40:29 LOG4 log_alfabeam: ALFABEAM 4 22.549364320011602 23.267304398209301 2008-Jul-24 01:40:29 LOG4 log_alfabeam: ALFABEAM 5 22.542068854609411 23.290288531013836 2008-Jul-24 01:40:29 LOG4 log_alfabeam: ALFABEAM 6 22.536326609586673 23.224340868575567 2008-Jul-24 01:40:29 INFO2 take_data: Starting WAPP scan: 820600001 2008-Jul-24 01:40:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 300 2008-Jul-24 01:40:30 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jul-24 01:40:30 LOG5 begin_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2008-Jul-24 01:40:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jul-24 01:40:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20431.00 2008-Jul-24 01:40:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1595.801237 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jul-24 01:40:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1345.801237 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2008-Jul-24 01:40:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1345.801237 MHz Flip = 1 Band = 0 Mixer = 1780.000000 MHz 2008-Jul-24 01:40:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1345.801237 MHz Flip = 1 Band = 0 Mixer = 1880.000000 MHz 2008-Jul-24 01:40:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1345.801237 MHz Flip = 1 Band = 0 Mixer = 1980.000000 MHz 2008-Jul-24 01:40:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1345.801237 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2008-Jul-24 01:40:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1345.801237 MHz Flip = 1 Band = 0 Mixer = 1780.000000 MHz 2008-Jul-24 01:40:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1345.801237 MHz Flip = 1 Band = 0 Mixer = 1880.000000 MHz 2008-Jul-24 01:40:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1345.801237 MHz Flip = 1 Band = 0 Mixer = 1980.000000 MHz 2008-Jul-24 01:40:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-24 01:40:32 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 1.068 1.014 2008-Jul-24 01:40:32 LOG4 check_wapp_levels: WAPP-2 power levels: 0.088 0.014 0.014 0.052 2008-Jul-24 01:40:32 LOG4 check_wapp_levels: WAPP-3 power levels: 0.136 0.014 0.025 0.014 2008-Jul-24 01:40:32 LOG4 check_wapp_levels: WAPP-4 power levels: 1.079 0.948 0.944 1.049 2008-Jul-24 01:40:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2008-Jul-24 01:40:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2008-Jul-24 01:40:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-24 01:40:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2008-Jul-24 01:40:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2008-Jul-24 01:40:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2008-Jul-24 01:40:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2008-Jul-24 01:40:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2008-Jul-24 01:40:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2008-Jul-24 01:40:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2008-Jul-24 01:40:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2008-Jul-24 01:40:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2008-Jul-24 01:40:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2008-Jul-24 01:41:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2008-Jul-24 01:41:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2008-Jul-24 01:41:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-24 01:41:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2008-Jul-24 01:41:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2008-Jul-24 01:41:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2008-Jul-24 01:41:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2008-Jul-24 01:41:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2008-Jul-24 01:41:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-24 01:41:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2008-Jul-24 01:41:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2008-Jul-24 01:41:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2008-Jul-24 01:41:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-24 01:41:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2008-Jul-24 01:41:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2008-Jul-24 01:41:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2008-Jul-24 01:41:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-24 01:41:33 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 1.065 1.007 2008-Jul-24 01:41:33 LOG4 check_wapp_levels: WAPP-2 power levels: 0.087 0.014 0.014 0.052 2008-Jul-24 01:41:33 LOG4 check_wapp_levels: WAPP-3 power levels: 0.137 0.014 0.026 0.014 2008-Jul-24 01:41:33 LOG4 check_wapp_levels: WAPP-4 power levels: 1.102 0.968 0.962 1.075 2008-Jul-24 01:41:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2008-Jul-24 01:41:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2008-Jul-24 01:41:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2008-Jul-24 01:41:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-24 01:41:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2008-Jul-24 01:41:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2008-Jul-24 01:41:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2008-Jul-24 01:41:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2008-Jul-24 01:41:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-24 01:41:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2008-Jul-24 01:41:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2008-Jul-24 01:41:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2008-Jul-24 01:41:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2008-Jul-24 01:42:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-24 01:42:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2008-Jul-24 01:42:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2008-Jul-24 01:42:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-24 01:42:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2008-Jul-24 01:42:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2008-Jul-24 01:42:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2008-Jul-24 01:42:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2008-Jul-24 01:42:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2008-Jul-24 01:42:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-24 01:42:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2008-Jul-24 01:42:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2008-Jul-24 01:42:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2008-Jul-24 01:42:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2008-Jul-24 01:42:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2008-Jul-24 01:42:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2008-Jul-24 01:42:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-24 01:42:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-24 01:42:35 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 1.044 0.990 2008-Jul-24 01:42:35 LOG4 check_wapp_levels: WAPP-2 power levels: 0.084 0.014 0.014 0.047 2008-Jul-24 01:42:35 LOG4 check_wapp_levels: WAPP-3 power levels: 0.136 0.014 0.026 0.014 2008-Jul-24 01:42:35 LOG4 check_wapp_levels: WAPP-4 power levels: 1.098 0.963 0.956 1.069 2008-Jul-24 01:42:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-24 01:42:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2008-Jul-24 01:42:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2008-Jul-24 01:42:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-24 01:42:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2008-Jul-24 01:42:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2008-Jul-24 01:42:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2008-Jul-24 01:42:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2008-Jul-24 01:42:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2008-Jul-24 01:42:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2008-Jul-24 01:42:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2008-Jul-24 01:43:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2008-Jul-24 01:43:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2008-Jul-24 01:43:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2008-Jul-24 01:43:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2008-Jul-24 01:43:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2008-Jul-24 01:43:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2008-Jul-24 01:43:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2008-Jul-24 01:43:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2008-Jul-24 01:43:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2008-Jul-24 01:43:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2008-Jul-24 01:43:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2008-Jul-24 01:43:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2008-Jul-24 01:43:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2008-Jul-24 01:43:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2008-Jul-24 01:43:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2008-Jul-24 01:43:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2008-Jul-24 01:43:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2008-Jul-24 01:43:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2008-Jul-24 01:43:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-24 01:43:36 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 1.039 0.986 2008-Jul-24 01:43:36 LOG4 check_wapp_levels: WAPP-2 power levels: 0.083 0.014 0.014 0.047 2008-Jul-24 01:43:36 LOG4 check_wapp_levels: WAPP-3 power levels: 0.134 0.014 0.026 0.014 2008-Jul-24 01:43:36 LOG4 check_wapp_levels: WAPP-4 power levels: 1.087 0.961 0.949 1.064 2008-Jul-24 01:43:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2008-Jul-24 01:43:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2008-Jul-24 01:43:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2008-Jul-24 01:43:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2008-Jul-24 01:43:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2008-Jul-24 01:43:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2008-Jul-24 01:43:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2008-Jul-24 01:43:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2008-Jul-24 01:43:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2008-Jul-24 01:43:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2008-Jul-24 01:43:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2008-Jul-24 01:44:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2008-Jul-24 01:44:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2008-Jul-24 01:44:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2008-Jul-24 01:44:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.086 (still bad) 2008-Jul-24 01:44:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-24 01:44:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2008-Jul-24 01:44:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2008-Jul-24 01:44:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2008-Jul-24 01:44:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2008-Jul-24 01:44:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2008-Jul-24 01:44:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-24 01:44:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.086 (still bad) 2008-Jul-24 01:44:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2008-Jul-24 01:44:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2008-Jul-24 01:44:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2008-Jul-24 01:44:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2008-Jul-24 01:44:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2008-Jul-24 01:44:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2008-Jul-24 01:44:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-24 01:44:37 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 1.035 0.982 2008-Jul-24 01:44:37 LOG4 check_wapp_levels: WAPP-2 power levels: 0.083 0.014 0.014 0.048 2008-Jul-24 01:44:37 LOG4 check_wapp_levels: WAPP-3 power levels: 0.133 0.014 0.026 0.014 2008-Jul-24 01:44:37 LOG4 check_wapp_levels: WAPP-4 power levels: 1.082 0.957 0.945 1.060 2008-Jul-24 01:44:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2008-Jul-24 01:44:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2008-Jul-24 01:44:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2008-Jul-24 01:44:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2008-Jul-24 01:44:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2008-Jul-24 01:44:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2008-Jul-24 01:44:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.086 (still bad) 2008-Jul-24 01:44:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2008-Jul-24 01:44:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2008-Jul-24 01:44:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.086 (still bad) 2008-Jul-24 01:44:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2008-Jul-24 01:45:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2008-Jul-24 01:45:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2008-Jul-24 01:45:04 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 01:45:04.296 (seconds: 6304.296)!} 2008-Jul-24 01:45:04 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 01:45:04.296 (seconds: 6304.296)! 2008-Jul-24 01:45:05 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 6303.0 to 6304.0! 2008-Jul-24 01:45:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2008-Jul-24 01:45:06 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (6303.0 - 6305.0)! 2008-Jul-24 01:45:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2008-Jul-24 01:45:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2008-Jul-24 01:45:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2008-Jul-24 01:45:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2008-Jul-24 01:45:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2008-Jul-24 01:45:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.080 (still bad) 2008-Jul-24 01:45:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2008-Jul-24 01:45:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2008-Jul-24 01:45:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2008-Jul-24 01:45:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2008-Jul-24 01:45:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2008-Jul-24 01:45:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.079 (still bad) 2008-Jul-24 01:45:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jul-24 01:45:31 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jul-24 01:45:31 LOG5 end_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2008-Jul-24 01:45:31 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jul-24 01:45:31 LOG5 end_task: Level: (2) ID = <10031> Status = 0 0 0 0 ok 2008-Jul-24 01:45:31 LOG4 send_obs_status: To obs_status: <1> PART 2 INFO {Waiting for OFF observation followed by CAL} 2008-Jul-24 01:45:31 LOG2 onoff_wapp: Parameters: RA-offset: -90.707100000001049 arcminutes wait: 60 secs 2008-Jul-24 01:45:31 LOG4 track_offsets: Calling 'track_offsets -90.707100000001049 0.0 main small' 2008-Jul-24 01:45:31 START begin_task: Starting task 'sending telescope offsets' 2008-Jul-24 01:45:31 LOG5 begin_task: Level: (2) ID = <10033> Status = 0 0 0 0 ok 2008-Jul-24 01:45:31 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Telescope Offsets} INFO {Changing telescope offsets ...} 2008-Jul-24 01:45:31 INFO2 track_offsets: Starting to send new offsets 2008-Jul-24 01:45:31 LOG3 vw_send: To DATATAKING: hdrldsrcnm "J223237+231205" 2008-Jul-24 01:45:31 LOG3 vw_send: To DATATAKING: pnt tr 223237.000000 231205.000000 -CJ -o -UD -1.51179 0.0 -CH 2008-Jul-24 01:45:31 STOP finish_task: Finishing task 'sending telescope offsets' 2008-Jul-24 01:45:31 LOG5 finish_task: Level: (2) ID = <10033> Status = 0 0 0 0 ok 2008-Jul-24 01:45:31 INFO2 finish_task: DONE finished sending: telescope offsets 2008-Jul-24 01:45:31 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-24 01:45:31 STOP end_task: Finishing task 'sending telescope offsets' with status 'OK' 2008-Jul-24 01:45:31 LOG5 end_task: Level: (2) ID = <10033> Status = 0 0 0 0 ok 2008-Jul-24 01:45:31 INFO2 lstwait: Waiting for 59.8 secs from LST 21:27:48 to LST 21:28:48 ... 2008-Jul-24 01:45:31 LOG4 send_obs_status: To obs_status: <1> TASKTIME 59.836175999996598 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Jul-24 01:45:31 START begin_task: Starting task 'waiting on wait on LST' 2008-Jul-24 01:45:31 LOG5 begin_task: Level: (2) ID = <10034> Status = 0 0 0 0 ok 2008-Jul-24 01:45:31 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "J223237+231205" 2008-Jul-24 01:45:31 LOG4 got_cormsg: From DATATAKING: pnt tr 223237.000000 231205.000000 -CJ -o -UD -1.51179 0.0 -CH 2008-Jul-24 01:45:31 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Jul-24 01:45:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2008-Jul-24 01:46:12 INFO4 wait_and_tell_when_on_source: Telescope is now on source 'J223237+231205' (after 41 seconds) 2008-Jul-24 01:46:31 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Jul-24 01:46:31 LOG5 end_task: Level: (2) ID = <10034> Status = 0 0 0 0 ok 2008-Jul-24 01:46:31 LOG4 lstwait: Finished waiting 0.16 seconds late 2008-Jul-24 01:46:31 INFO3 lstwait: Finished waiting 2008-Jul-24 01:46:31 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Jul-24 01:46:31 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_onoff_off MESSAGE {Taking OFF scan ...} 2008-Jul-24 01:46:31 LOG4 take_data: Calling 'take_data 300 1 ONOFF OFF -' 2008-Jul-24 01:46:31 START begin_task: Starting task 'WAPP spectral observation' 2008-Jul-24 01:46:31 LOG5 begin_task: Level: (2) ID = <10035> Status = 0 0 0 0 ok 2008-Jul-24 01:46:31 LOG5 log_alfabeam: Parameters: 22.543611111111112 23.201388888888889 21.479911 2008.5641997807186 0.000000 2008-Jul-24 01:46:31 LOG4 log_alfabeam: ALFABEAM 0 22.543611111111108 23.201388888888903 2008-Jul-24 01:46:31 LOG4 log_alfabeam: ALFABEAM 1 22.537994320382669 23.133486900043369 2008-Jul-24 01:46:31 LOG4 log_alfabeam: ALFABEAM 2 22.545312842446862 23.113047820110928 2008-Jul-24 01:46:31 LOG4 log_alfabeam: ALFABEAM 3 22.550941529450114 23.180924464753225 2008-Jul-24 01:46:31 LOG4 log_alfabeam: ALFABEAM 4 22.549214759637184 23.269716384256789 2008-Jul-24 01:46:31 LOG4 log_alfabeam: ALFABEAM 5 22.541870952396781 23.289591767204005 2008-Jul-24 01:46:31 LOG4 log_alfabeam: ALFABEAM 6 22.536279264259985 23.221239636630933 2008-Jul-24 01:46:31 INFO2 take_data: Starting WAPP scan: 820600002 2008-Jul-24 01:46:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 300 2008-Jul-24 01:46:32 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jul-24 01:46:32 LOG5 begin_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2008-Jul-24 01:46:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jul-24 01:46:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20793.00 2008-Jul-24 01:46:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1595.801237 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jul-24 01:46:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1345.801237 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2008-Jul-24 01:46:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1345.801237 MHz Flip = 1 Band = 0 Mixer = 1780.000000 MHz 2008-Jul-24 01:46:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1345.801237 MHz Flip = 1 Band = 0 Mixer = 1880.000000 MHz 2008-Jul-24 01:46:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1345.801237 MHz Flip = 1 Band = 0 Mixer = 1980.000000 MHz 2008-Jul-24 01:46:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1345.801237 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2008-Jul-24 01:46:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1345.801237 MHz Flip = 1 Band = 0 Mixer = 1780.000000 MHz 2008-Jul-24 01:46:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1345.801237 MHz Flip = 1 Band = 0 Mixer = 1880.000000 MHz 2008-Jul-24 01:46:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1345.801237 MHz Flip = 1 Band = 0 Mixer = 1980.000000 MHz 2008-Jul-24 01:46:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-24 01:46:34 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 1.035 0.983 2008-Jul-24 01:46:34 LOG4 check_wapp_levels: WAPP-2 power levels: 0.082 0.014 0.014 0.048 2008-Jul-24 01:46:34 LOG4 check_wapp_levels: WAPP-3 power levels: 0.138 0.014 0.026 0.014 2008-Jul-24 01:46:34 LOG4 check_wapp_levels: WAPP-4 power levels: 1.100 0.969 0.960 1.075 2008-Jul-24 01:46:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2008-Jul-24 01:46:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-24 01:46:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2008-Jul-24 01:46:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2008-Jul-24 01:46:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2008-Jul-24 01:46:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-24 01:46:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2008-Jul-24 01:46:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2008-Jul-24 01:46:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-24 01:46:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2008-Jul-24 01:46:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2008-Jul-24 01:46:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2008-Jul-24 01:47:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2008-Jul-24 01:47:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2008-Jul-24 01:47:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2008-Jul-24 01:47:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2008-Jul-24 01:47:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2008-Jul-24 01:47:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2008-Jul-24 01:47:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-24 01:47:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2008-Jul-24 01:47:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2008-Jul-24 01:47:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2008-Jul-24 01:47:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2008-Jul-24 01:47:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2008-Jul-24 01:47:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2008-Jul-24 01:47:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2008-Jul-24 01:47:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2008-Jul-24 01:47:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2008-Jul-24 01:47:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2008-Jul-24 01:47:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-24 01:47:35 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 1.049 0.990 2008-Jul-24 01:47:35 LOG4 check_wapp_levels: WAPP-2 power levels: 0.084 0.014 0.014 0.048 2008-Jul-24 01:47:35 LOG4 check_wapp_levels: WAPP-3 power levels: 0.137 0.014 0.026 0.014 2008-Jul-24 01:47:35 LOG4 check_wapp_levels: WAPP-4 power levels: 1.103 0.968 0.963 1.072 2008-Jul-24 01:47:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-24 01:47:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2008-Jul-24 01:47:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2008-Jul-24 01:47:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2008-Jul-24 01:47:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2008-Jul-24 01:47:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-24 01:47:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2008-Jul-24 01:47:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2008-Jul-24 01:47:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2008-Jul-24 01:47:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-24 01:47:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2008-Jul-24 01:47:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-24 01:48:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2008-Jul-24 01:48:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2008-Jul-24 01:48:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2008-Jul-24 01:48:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2008-Jul-24 01:48:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2008-Jul-24 01:48:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-24 01:48:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2008-Jul-24 01:48:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2008-Jul-24 01:48:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2008-Jul-24 01:48:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2008-Jul-24 01:48:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2008-Jul-24 01:48:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2008-Jul-24 01:48:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2008-Jul-24 01:48:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-24 01:48:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2008-Jul-24 01:48:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2008-Jul-24 01:48:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2008-Jul-24 01:48:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2008-Jul-24 01:48:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-24 01:48:37 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 1.042 0.986 2008-Jul-24 01:48:37 LOG4 check_wapp_levels: WAPP-2 power levels: 0.084 0.014 0.014 0.048 2008-Jul-24 01:48:37 LOG4 check_wapp_levels: WAPP-3 power levels: 0.136 0.014 0.026 0.014 2008-Jul-24 01:48:37 LOG4 check_wapp_levels: WAPP-4 power levels: 1.098 0.963 0.958 1.067 2008-Jul-24 01:48:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2008-Jul-24 01:48:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2008-Jul-24 01:48:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-24 01:48:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2008-Jul-24 01:48:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2008-Jul-24 01:48:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2008-Jul-24 01:48:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2008-Jul-24 01:48:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2008-Jul-24 01:48:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2008-Jul-24 01:48:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2008-Jul-24 01:49:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2008-Jul-24 01:49:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2008-Jul-24 01:49:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2008-Jul-24 01:49:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2008-Jul-24 01:49:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2008-Jul-24 01:49:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2008-Jul-24 01:49:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2008-Jul-24 01:49:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2008-Jul-24 01:49:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2008-Jul-24 01:49:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2008-Jul-24 01:49:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2008-Jul-24 01:49:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2008-Jul-24 01:49:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2008-Jul-24 01:49:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2008-Jul-24 01:49:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2008-Jul-24 01:49:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2008-Jul-24 01:49:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2008-Jul-24 01:49:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2008-Jul-24 01:49:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2008-Jul-24 01:49:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-24 01:49:38 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 1.039 0.985 2008-Jul-24 01:49:38 LOG4 check_wapp_levels: WAPP-2 power levels: 0.083 0.014 0.014 0.048 2008-Jul-24 01:49:38 LOG4 check_wapp_levels: WAPP-3 power levels: 0.135 0.014 0.026 0.014 2008-Jul-24 01:49:38 LOG4 check_wapp_levels: WAPP-4 power levels: 1.088 0.962 0.951 1.066 2008-Jul-24 01:49:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2008-Jul-24 01:49:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2008-Jul-24 01:49:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2008-Jul-24 01:49:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2008-Jul-24 01:49:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2008-Jul-24 01:49:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2008-Jul-24 01:49:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2008-Jul-24 01:49:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2008-Jul-24 01:49:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2008-Jul-24 01:49:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2008-Jul-24 01:50:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2008-Jul-24 01:50:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2008-Jul-24 01:50:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2008-Jul-24 01:50:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2008-Jul-24 01:50:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2008-Jul-24 01:50:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2008-Jul-24 01:50:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2008-Jul-24 01:50:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2008-Jul-24 01:50:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2008-Jul-24 01:50:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2008-Jul-24 01:50:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2008-Jul-24 01:50:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2008-Jul-24 01:50:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2008-Jul-24 01:50:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2008-Jul-24 01:50:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2008-Jul-24 01:50:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2008-Jul-24 01:50:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2008-Jul-24 01:50:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2008-Jul-24 01:50:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2008-Jul-24 01:50:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-24 01:50:39 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 1.039 0.984 2008-Jul-24 01:50:39 LOG4 check_wapp_levels: WAPP-2 power levels: 0.083 0.014 0.014 0.052 2008-Jul-24 01:50:39 LOG4 check_wapp_levels: WAPP-3 power levels: 0.134 0.014 0.026 0.014 2008-Jul-24 01:50:39 LOG4 check_wapp_levels: WAPP-4 power levels: 1.091 0.963 0.952 1.066 2008-Jul-24 01:50:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2008-Jul-24 01:50:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2008-Jul-24 01:50:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2008-Jul-24 01:50:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2008-Jul-24 01:50:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2008-Jul-24 01:50:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2008-Jul-24 01:50:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2008-Jul-24 01:50:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2008-Jul-24 01:50:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2008-Jul-24 01:50:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2008-Jul-24 01:51:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2008-Jul-24 01:51:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2008-Jul-24 01:51:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.086 (still bad) 2008-Jul-24 01:51:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.086 (still bad) 2008-Jul-24 01:51:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2008-Jul-24 01:51:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2008-Jul-24 01:51:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.086 (still bad) 2008-Jul-24 01:51:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2008-Jul-24 01:51:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2008-Jul-24 01:51:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2008-Jul-24 01:51:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2008-Jul-24 01:51:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2008-Jul-24 01:51:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.086 (still bad) 2008-Jul-24 01:51:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2008-Jul-24 01:51:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2008-Jul-24 01:51:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2008-Jul-24 01:51:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jul-24 01:51:33 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jul-24 01:51:33 LOG5 end_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2008-Jul-24 01:51:33 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jul-24 01:51:33 LOG5 end_task: Level: (2) ID = <10035> Status = 0 0 0 0 ok 2008-Jul-24 01:51:33 LOG2 take_cal: Calling 'take_cal hcorcal 10 0' 2008-Jul-24 01:51:33 START begin_task: Starting task 'WAPP calibration' 2008-Jul-24 01:51:33 LOG5 begin_task: Level: (2) ID = <10037> Status = 0 0 0 0 ok 2008-Jul-24 01:51:33 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Jul-24 01:51:33 START begin_task: Starting task 'selecting calibration type' 2008-Jul-24 01:51:33 LOG5 begin_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2008-Jul-24 01:51:33 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Jul-24 01:51:33 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Jul-24 01:51:33 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jul-24 01:51:33 START begin_task: Starting task 'waiting on setcal' 2008-Jul-24 01:51:33 LOG5 begin_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2008-Jul-24 01:51:33 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Jul-24 01:51:33 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jul-24 01:51:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-24 01:51:33 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jul-24 01:51:33 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Jul-24 01:51:33 LOG5 end_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2008-Jul-24 01:51:33 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Jul-24 01:51:33 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jul-24 01:51:33 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Jul-24 01:51:33 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jul-24 01:51:33 LOG5 begin_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2008-Jul-24 01:51:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-24 01:51:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2008-Jul-24 01:51:35 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jul-24 01:51:35 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jul-24 01:51:35 LOG5 end_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2008-Jul-24 01:51:35 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jul-24 01:51:35 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Jul-24 01:51:35 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jul-24 01:51:35 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Jul-24 01:51:35 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jul-24 01:51:35 LOG5 begin_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2008-Jul-24 01:51:35 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jul-24 01:51:35 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jul-24 01:51:35 LOG5 end_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2008-Jul-24 01:51:35 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jul-24 01:51:35 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Jul-24 01:51:35 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Jul-24 01:51:35 LOG5 end_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2008-Jul-24 01:51:35 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Jul-24 01:51:35 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Jul-24 01:51:35 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Jul-24 01:51:35 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jul-24 01:51:35 LOG5 begin_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2008-Jul-24 01:51:35 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jul-24 01:51:35 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Jul-24 01:51:35 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jul-24 01:51:35 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jul-24 01:51:35 LOG5 end_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2008-Jul-24 01:51:35 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Jul-24 01:51:35 LOG4 take_data: Calling 'take_data 10 10 CAL ON -' 2008-Jul-24 01:51:35 START begin_task: Starting task 'WAPP spectral observation' 2008-Jul-24 01:51:35 LOG5 begin_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2008-Jul-24 01:51:35 LOG5 log_alfabeam: Parameters: 22.543611111111112 23.201388888888889 21.564308 2008.5642093822091 0.000000 2008-Jul-24 01:51:35 LOG4 log_alfabeam: ALFABEAM 0 22.543611111111108 23.201388888888893 2008-Jul-24 01:51:35 LOG4 log_alfabeam: ALFABEAM 1 22.538139526212539 23.131275909954311 2008-Jul-24 01:51:35 LOG4 log_alfabeam: ALFABEAM 2 22.545497436791450 23.113763745470035 2008-Jul-24 01:51:35 LOG4 log_alfabeam: ALFABEAM 3 22.550981847853244 23.183859113390930 2008-Jul-24 01:51:35 LOG4 log_alfabeam: ALFABEAM 4 22.549067008480232 23.271958979833428 2008-Jul-24 01:51:35 LOG4 log_alfabeam: ALFABEAM 5 22.541683557071138 23.288848498468020 2008-Jul-24 01:51:35 LOG4 log_alfabeam: ALFABEAM 6 22.536240549948054 23.218261671046822 2008-Jul-24 01:51:35 INFO2 take_data: Starting WAPP scan: 820600003 2008-Jul-24 01:51:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jul-24 01:51:35 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jul-24 01:51:35 LOG5 begin_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2008-Jul-24 01:51:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jul-24 01:51:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21096.00 2008-Jul-24 01:51:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1595.801237 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jul-24 01:51:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1345.801237 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2008-Jul-24 01:51:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1345.801237 MHz Flip = 1 Band = 0 Mixer = 1780.000000 MHz 2008-Jul-24 01:51:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1345.801237 MHz Flip = 1 Band = 0 Mixer = 1880.000000 MHz 2008-Jul-24 01:51:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1345.801237 MHz Flip = 1 Band = 0 Mixer = 1980.000000 MHz 2008-Jul-24 01:51:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1345.801237 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2008-Jul-24 01:51:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1345.801237 MHz Flip = 1 Band = 0 Mixer = 1780.000000 MHz 2008-Jul-24 01:51:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1345.801237 MHz Flip = 1 Band = 0 Mixer = 1880.000000 MHz 2008-Jul-24 01:51:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1345.801237 MHz Flip = 1 Band = 0 Mixer = 1980.000000 MHz 2008-Jul-24 01:51:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jul-24 01:51:46 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jul-24 01:51:46 LOG5 end_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2008-Jul-24 01:51:46 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jul-24 01:51:46 LOG5 end_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2008-Jul-24 01:51:46 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Jul-24 01:51:46 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Jul-24 01:51:46 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Jul-24 01:51:46 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jul-24 01:51:46 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2008-Jul-24 01:51:46 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jul-24 01:51:46 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jul-24 01:51:46 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jul-24 01:51:46 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jul-24 01:51:46 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2008-Jul-24 01:51:46 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Jul-24 01:51:46 LOG4 take_data: Calling 'take_data 10 10 CAL OFF -' 2008-Jul-24 01:51:46 START begin_task: Starting task 'WAPP spectral observation' 2008-Jul-24 01:51:46 LOG5 begin_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2008-Jul-24 01:51:46 LOG5 log_alfabeam: Parameters: 22.543611111111112 23.201388888888889 21.567651 2008.5642097624661 0.000000 2008-Jul-24 01:51:46 LOG4 log_alfabeam: ALFABEAM 0 22.543611111111115 23.201388888888882 2008-Jul-24 01:51:46 LOG4 log_alfabeam: ALFABEAM 1 22.538145770526107 23.131183666820839 2008-Jul-24 01:51:46 LOG4 log_alfabeam: ALFABEAM 2 22.545505211985809 23.113795652705551 2008-Jul-24 01:51:46 LOG4 log_alfabeam: ALFABEAM 3 22.550983417546618 23.183983605942618 2008-Jul-24 01:51:46 LOG4 log_alfabeam: ALFABEAM 4 22.549060652659733 23.272052530414928 2008-Jul-24 01:51:46 LOG4 log_alfabeam: ALFABEAM 5 22.541675664801083 23.288815381943262 2008-Jul-24 01:51:46 LOG4 log_alfabeam: ALFABEAM 6 22.536239052280155 23.218135353374056 2008-Jul-24 01:51:46 INFO2 take_data: Starting WAPP scan: 820600004 2008-Jul-24 01:51:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jul-24 01:51:47 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jul-24 01:51:47 LOG5 begin_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2008-Jul-24 01:51:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jul-24 01:51:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2008-Jul-24 01:51:47 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.018 1.368 1.294 2008-Jul-24 01:51:47 LOG4 check_wapp_levels: WAPP-2 power levels: 0.106 0.014 0.014 0.062 2008-Jul-24 01:51:47 LOG4 check_wapp_levels: WAPP-3 power levels: 0.181 0.014 0.026 0.014 2008-Jul-24 01:51:47 LOG4 check_wapp_levels: WAPP-4 power levels: 1.477 1.287 1.288 1.425 2008-Jul-24 01:51:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21108.00 2008-Jul-24 01:51:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1595.801237 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jul-24 01:51:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1345.801237 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2008-Jul-24 01:51:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1345.801237 MHz Flip = 1 Band = 0 Mixer = 1780.000000 MHz 2008-Jul-24 01:51:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1345.801237 MHz Flip = 1 Band = 0 Mixer = 1880.000000 MHz 2008-Jul-24 01:51:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1345.801237 MHz Flip = 1 Band = 0 Mixer = 1980.000000 MHz 2008-Jul-24 01:51:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1345.801237 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2008-Jul-24 01:51:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1345.801237 MHz Flip = 1 Band = 0 Mixer = 1780.000000 MHz 2008-Jul-24 01:51:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1345.801237 MHz Flip = 1 Band = 0 Mixer = 1880.000000 MHz 2008-Jul-24 01:51:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1345.801237 MHz Flip = 1 Band = 0 Mixer = 1980.000000 MHz 2008-Jul-24 01:51:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2008-Jul-24 01:51:58 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Jul-24 01:51:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jul-24 01:51:58 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jul-24 01:51:58 LOG5 end_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2008-Jul-24 01:51:58 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jul-24 01:51:58 LOG5 end_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2008-Jul-24 01:51:58 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Jul-24 01:51:58 STOP finish_task: Finishing task 'WAPP calibration' 2008-Jul-24 01:51:58 LOG5 finish_task: Level: (2) ID = <10037> Status = 0 0 0 0 ok 2008-Jul-24 01:51:58 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Jul-24 01:51:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-24 01:51:58 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Jul-24 01:51:58 LOG5 end_task: Level: (2) ID = <10037> Status = 0 0 0 0 ok 2008-Jul-24 01:51:58 START begin_task: Starting task 'clearing telescope offsets' 2008-Jul-24 01:51:58 LOG5 begin_task: Level: (2) ID = <10048> Status = 0 0 0 0 ok 2008-Jul-24 01:51:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Clearing Telescope Offsets} INFO {Removing telescope offsets ...} 2008-Jul-24 01:51:58 INFO3 clear_offsets: Removing telescope offsets 2008-Jul-24 01:51:58 LOG3 vw_send: To DATATAKING: hdrldsrcnm "J223237+231205" 2008-Jul-24 01:51:58 LOG3 vw_send: To DATATAKING: pnt tr 223237.000000 231205.000000 -CJ 2008-Jul-24 01:51:58 STOP finish_task: Finishing task 'clearing telescope offsets' 2008-Jul-24 01:51:58 LOG5 finish_task: Level: (2) ID = <10048> Status = 0 0 0 0 ok 2008-Jul-24 01:51:58 INFO2 finish_task: DONE finished clearing: telescope offsets 2008-Jul-24 01:51:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-24 01:51:59 STOP end_task: Finishing task 'clearing telescope offsets' with status 'OK' 2008-Jul-24 01:51:59 LOG5 end_task: Level: (2) ID = <10048> Status = 0 0 0 0 ok 2008-Jul-24 01:51:59 STOP finish_task: Finishing task 'standard on/off' 2008-Jul-24 01:51:59 LOG5 finish_task: Level: (1) ID = <10015> Status = 0 0 0 0 ok 2008-Jul-24 01:51:59 DONE finish_task: DONE finished pattern: standard on/off 2008-Jul-24 01:51:59 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Jul-24 01:51:59 END end_task: Finishing task 'standard on/off' with status 'OK' 2008-Jul-24 01:51:59 LOG5 end_task: Level: (1) ID = <10015> Status = 0 0 0 0 ok 2008-Jul-24 01:51:59 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "J223237+231205" 2008-Jul-24 01:51:59 LOG4 got_cormsg: From DATATAKING: pnt tr 223237.000000 231205.000000 -CJ 2008-Jul-24 01:51:59 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Jul-24 01:52:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2008-Jul-24 01:52:48 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2008-Jul-24 01:52:48 LOG4 exec_msg: From OBSERVER: restart_wapp 2008-Jul-24 01:52:48 LOG5 restart_wapp: Calling 'restart_wapp' 2008-Jul-24 01:52:48 BEGIN begin_task: Starting task 'restarting the WAPPs' 2008-Jul-24 01:52:48 LOG5 begin_task: Level: (1) ID = <10049> Status = 0 0 0 0 ok 2008-Jul-24 01:52:48 NOTE restart_wapp: Restarting all WAPPs 2008-Jul-24 01:52:48 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2008-Jul-24 01:52:48 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2008-Jul-24 01:52:48 LOG5 end_task: Level: (1) ID = <10049> Status = 0 0 0 0 ok 2008-Jul-24 01:52:48 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Jul-24 01:52:49 LOG3 exec_msg: Closing socket 2008-Jul-24 01:52:49 LOG3 exec_msg: Closing socket 2008-Jul-24 01:52:49 LOG3 exec_msg: Closing socket 2008-Jul-24 01:52:49 LOG3 exec_msg: Closing socket 2008-Jul-24 01:52:52 ALERT WAPP=1-wappcon: WAPP1 restarting 2008-Jul-24 01:52:52 ALERT WAPP=4-wappcon: WAPP4 restarting 2008-Jul-24 01:52:52 ALERT WAPP=3-wappcon: WAPP3 restarting 2008-Jul-24 01:52:52 ALERT WAPP=2-wappcon: WAPP2 restarting 2008-Jul-24 01:54:37 INFO1 CIMA-run_command_file: Transferring command file 'command_galfasrc.cmd ' to executive ... 2008-Jul-24 01:54:37 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 5 {LOAD togs_ages.conf} 2008-Jul-24 01:54:37 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 6 {CATALOG togs_ages.cat} 2008-Jul-24 01:54:37 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {GOTO galfasrc} 2008-Jul-24 01:54:37 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {ALFAANGLE 19} 2008-Jul-24 01:54:37 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {WAITTRACK} 2008-Jul-24 01:54:37 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 13 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2008-Jul-24 01:54:37 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-Jul-24 01:54:37 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc.cmd 1 1 6 2008-Jul-24 01:54:37 LOG4 run_command_file: Calling 'run_command_file command_galfasrc.cmd 1 1 6' 2008-Jul-24 01:54:37 BEGIN begin_task: Starting task 'running command file 'command_galfasrc.cmd'' 2008-Jul-24 01:54:37 LOG5 begin_task: Level: (1) ID = <10050> Status = 0 0 0 0 ok 2008-Jul-24 01:54:37 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc.cmd' ...} 2008-Jul-24 01:54:37 NOTE run_command_file: Starting execution of command file 'command_galfasrc.cmd' from line 1 2008-Jul-24 01:54:37 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_ages.conf' 2008-Jul-24 01:54:37 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2008-Jul-24 01:54:37 NOTE CIMA-check_config_file: File 'togs_ages.conf' contains a observing mode set-up which will be ignored! 2008-Jul-24 01:54:37 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Jul-24 01:54:37 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2008-Jul-24 01:54:37 NOTE CIMA-load_config_file: Loading configuration file 'togs_ages.conf' 2008-Jul-24 01:54:38 INFO4 CIMA-antvel: Computed apparent RA = 22:33:03.1 Dec = +23:14:45.6 from RA = 22:32:37.0 Dec = +23:12:05.0 Epoch = 2008.56422 J 2008-Jul-24 01:54:38 INFO4 CIMA-antvel: Parameters to Doppler: Topocentric 21277.0 2008 206 0 2008-Jul-24 01:54:38 INFO3 CIMA-antvel: Computed velocity correction 0.0000000000 2008-Jul-24 01:54:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Jul-24 01:54:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Jul-24 01:54:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Jul-24 01:54:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Jul-24 01:54:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Jul-24 01:54:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2008-Jul-24 01:54:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Jul-24 01:54:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1381.2" 2008-Jul-24 01:54:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1381.2" 2008-Jul-24 01:54:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1381.2" 2008-Jul-24 01:54:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1381.2" 2008-Jul-24 01:54:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1381.2" 2008-Jul-24 01:54:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1381.2" 2008-Jul-24 01:54:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1381.2" 2008-Jul-24 01:54:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1381.2" 2008-Jul-24 01:54:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1381.2" 2008-Jul-24 01:54:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Jul-24 01:54:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Jul-24 01:54:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Jul-24 01:54:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Jul-24 01:54:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Jul-24 01:54:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Jul-24 01:54:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Jul-24 01:54:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Jul-24 01:54:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Jul-24 01:54:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Jul-24 01:54:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Jul-24 01:54:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Jul-24 01:54:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Jul-24 01:54:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2008-Jul-24 01:54:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Jul-24 01:54:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Jul-24 01:54:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Jul-24 01:54:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Jul-24 01:54:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Jul-24 01:54:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Jul-24 01:54:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Jul-24 01:54:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Jul-24 01:54:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Jul-24 01:54:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1558.654704" 2008-Jul-24 01:54:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Jul-24 01:54:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Jul-24 01:54:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Jul-24 01:54:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Jul-24 01:54:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Jul-24 01:54:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Jul-24 01:54:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Jul-24 01:54:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Jul-24 01:54:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Jul-24 01:54:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Jul-24 01:54:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Jul-24 01:54:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Jul-24 01:54:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Jul-24 01:54:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Jul-24 01:54:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Jul-24 01:54:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Jul-24 01:54:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Jul-24 01:54:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Jul-24 01:54:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Jul-24 01:54:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Jul-24 01:54:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Jul-24 01:54:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Jul-24 01:54:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Jul-24 01:54:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Jul-24 01:54:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Jul-24 01:54:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Jul-24 01:54:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Jul-24 01:54:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Jul-24 01:54:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Jul-24 01:54:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Jul-24 01:54:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Jul-24 01:54:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Jul-24 01:54:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Jul-24 01:54:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Jul-24 01:54:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Jul-24 01:54:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Jul-24 01:54:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Jul-24 01:54:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Jul-24 01:54:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Jul-24 01:54:40 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Jul-24 01:54:40 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Jul-24 01:54:40 LOG5 begin_task: Level: (2) ID = <10051> Status = 0 0 0 0 ok 2008-Jul-24 01:54:40 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Jul-24 01:54:40 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Jul-24 01:54:40 LOG1 config_iflo: Receiver ALFA already selected 2008-Jul-24 01:54:40 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jul-24 01:54:40 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Jul-24 01:54:40 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jul-24 01:54:40 LOG5 begin_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2008-Jul-24 01:54:40 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jul-24 01:54:40 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jul-24 01:54:40 LOG5 end_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2008-Jul-24 01:54:40 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jul-24 01:54:40 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Jul-24 01:54:40 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2008-Jul-24 01:54:40 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2008-Jul-24 01:54:40 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Jul-24 01:54:40 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Jul-24 01:54:40 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2008-Jul-24 01:54:40 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2008-Jul-24 01:54:40 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2008-Jul-24 01:54:40 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1558654704.0} 2008-Jul-24 01:54:40 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2008-Jul-24 01:54:40 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2008-Jul-24 01:54:40 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Jul-24 01:54:40 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Jul-24 01:54:40 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Jul-24 01:54:40 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Jul-24 01:54:40 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Jul-24 01:54:40 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2008-Jul-24 01:54:40 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2008-Jul-24 01:54:40 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2008-Jul-24 01:54:40 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2008-Jul-24 01:54:40 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Jul-24 01:54:40 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2008-Jul-24 01:54:40 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2008-Jul-24 01:54:40 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Jul-24 01:54:40 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-24 01:54:40 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2008-Jul-24 01:54:40 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2008-Jul-24 01:54:40 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Jul-24 01:54:40 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2008-Jul-24 01:54:40 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2008-Jul-24 01:54:40 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Jul-24 01:54:41 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jul-24 01:54:41 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Jul-24 01:54:41 LOG5 begin_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2008-Jul-24 01:54:41 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1558654704.0} 2008-Jul-24 01:54:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Jul-24 01:54:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-24 01:54:41 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jul-24 01:54:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-24 01:54:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-24 01:54:41 LOG4 got_cormsg: From DATATAKING: vw% DONE 2008-Jul-24 01:54:41 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Jul-24 01:54:41 LOG5 end_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2008-Jul-24 01:54:41 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Jul-24 01:54:41 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Jul-24 01:54:41 LOG5 finish_task: Level: (2) ID = <10051> Status = 0 0 0 0 ok 2008-Jul-24 01:54:41 DONE finish_task: DONE finished configuration: IF/LO path 2008-Jul-24 01:54:41 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Jul-24 01:54:41 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Jul-24 01:54:41 LOG5 end_task: Level: (2) ID = <10051> Status = 0 0 0 0 ok 2008-Jul-24 01:54:41 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Jul-24 01:54:41 LOG5 begin_task: Level: (2) ID = <10054> Status = 0 0 0 0 ok 2008-Jul-24 01:54:41 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Jul-24 01:54:41 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Jul-24 01:54:41 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2008-Jul-24 01:54:41 START begin_task: Starting task 'selecting calibration port' 2008-Jul-24 01:54:41 LOG5 begin_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2008-Jul-24 01:54:41 LOG3 vw_send: To DATATAKING: calport 3 2008-Jul-24 01:54:41 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Jul-24 01:54:41 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jul-24 01:54:41 START begin_task: Starting task 'waiting on calport' 2008-Jul-24 01:54:41 LOG5 begin_task: Level: (4) ID = <10056> Status = 0 0 0 0 ok 2008-Jul-24 01:54:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-24 01:54:41 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Jul-24 01:54:41 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jul-24 01:54:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-24 01:54:41 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jul-24 01:54:41 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Jul-24 01:54:41 LOG5 end_task: Level: (4) ID = <10056> Status = 0 0 0 0 ok 2008-Jul-24 01:54:41 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Jul-24 01:54:41 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Jul-24 01:54:41 LOG5 end_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2008-Jul-24 01:54:41 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Jul-24 01:54:41 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Jul-24 01:54:42 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jul-24 01:54:42 LOG5 begin_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2008-Jul-24 01:54:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-24 01:54:42 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jul-24 01:54:42 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jul-24 01:54:42 LOG3 got_ca