2008-Jul-15 01:44:51 BEGIN executive: CIMA executive starting ... 2008-Jul-15 01:44:52 NOTE executive: STARTING NEW CIMA SESSION 2008-Jul-15 01:44:52 INFO1 executive: Using CIMA version 3.0.00 'next' from 2008-06-12 15:50 2008-Jul-15 01:44:52 INFO4 executive: This is an ON-LINE session 2008-Jul-15 01:44:52 INFO4 executive: This is a REMOTE session 2008-Jul-15 01:44:52 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2008-Jul-15 01:44:52 INFO1 executive: CIMA session for project 'a2048' in 'line' mode for 'RM' 2008-Jul-15 01:44:52 INFO2 executive: Logging to '/share/obs4/usr/a2048/a2048.cimalog_20080715' 2008-Jul-15 01:44:52 LOG2 log_preferences: Currently applied preferences: 2008-Jul-15 01:44:52 LOG2 log_preferences: prefs(dailylog) = daily 2008-Jul-15 01:44:52 LOG2 log_preferences: prefs(offlinelog) = skip 2008-Jul-15 01:44:52 LOG2 log_preferences: prefs(datawindow) = ignore 2008-Jul-15 01:44:52 LOG2 log_preferences: prefs(limitwarning) = enabled 2008-Jul-15 01:44:52 LOG2 log_preferences: prefs(wappfailure) = abort 2008-Jul-15 01:44:52 LOG2 log_preferences: prefs(helpstyle) = stay-open 2008-Jul-15 01:44:52 LOG2 log_preferences: prefs(logcolours) = full 2008-Jul-15 01:44:52 LOG2 log_preferences: prefs(displaylevel) = INFO3 2008-Jul-15 01:44:52 LOG2 log_preferences: prefs(loglevel) = LOG5 2008-Jul-15 01:44:52 LOG2 log_preferences: prefs(displayformat) = short 2008-Jul-15 01:44:52 LOG2 log_preferences: prefs(logformat) = new 2008-Jul-15 01:44:52 LOG2 log_preferences: prefs(fontsize) = 4 2008-Jul-15 01:44:52 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2008-Jul-15 01:44:52 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2048 2008-Jul-15 01:44:52 ALERT executive: CIMA executive ready 2008-Jul-15 01:44:54 NOTE frontend: CIMA frontend ready 2008-Jul-15 01:44:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-15 01:44:55 LOG4 got_cormsg: From DATATAKING: setup 2008-Jul-15 01:45:01 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0xd 2008-Jul-15 01:45:01 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0xd' 2008-Jul-15 01:45:01 LOG4 got_cormsg: From DATATAKING: vw% io 2008-Jul-15 01:45:01 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2008-Jul-15 01:45:01 LOG4 got_cormsg: From DATATAKING: 2008-Jul-15 01:45:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-15 01:45:01 LOG4 got_cormsg: From DATATAKING: tape stat 2008-Jul-15 01:45:01 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2008-Jul-15 01:45:01 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2008-Jul-15 01:45:01 LOG4 got_cormsg: From DATATAKING: vw% connectall 2008-Jul-15 01:45:01 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2008-Jul-15 01:45:01 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2008-Jul-15 01:45:01 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2008-Jul-15 01:45:01 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2008-Jul-15 01:45:01 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2008-Jul-15 01:45:01 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2008-Jul-15 01:45:01 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2008-Jul-15 01:45:01 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2008-Jul-15 01:45:01 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2048 2008-Jul-15 01:45:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-15 01:45:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-15 01:45:15 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2008-Jul-15 01:45:15 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2008-Jul-15 01:45:15 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2008-Jul-15 01:45:15 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2008-Jul-15 01:45:15 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Jul-15 01:45:15 NOTE select_receiver: Starting to select receiver ALFA 2008-Jul-15 01:45:15 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Jul-15 01:45:16 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Jul-15 01:45:16 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Jul-15 01:45:16 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Jul-15 01:45:16 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Jul-15 01:45:16 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Jul-15 01:45:16 DONE finish_task: DONE finished selecting: receiver ALFA 2008-Jul-15 01:45:16 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Jul-15 01:45:16 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Jul-15 01:45:16 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Jul-15 01:45:16 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Jul-15 01:45:16 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Jul-15 01:45:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-15 01:45:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-15 01:45:26 NOTE CIMA-load_config_file: Loading and applying configuration file 'ages_alfafu.conf' 2008-Jul-15 01:45:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Jul-15 01:45:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Jul-15 01:45:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Jul-15 01:45:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Jul-15 01:45:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Jul-15 01:45:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2008-Jul-15 01:45:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Jul-15 01:45:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786" 2008-Jul-15 01:45:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786" 2008-Jul-15 01:45:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786" 2008-Jul-15 01:45:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786" 2008-Jul-15 01:45:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786" 2008-Jul-15 01:45:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786" 2008-Jul-15 01:45:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786" 2008-Jul-15 01:45:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786" 2008-Jul-15 01:45:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786" 2008-Jul-15 01:45:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Jul-15 01:45:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Jul-15 01:45:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Jul-15 01:45:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Jul-15 01:45:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Jul-15 01:45:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Jul-15 01:45:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Jul-15 01:45:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Jul-15 01:45:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Jul-15 01:45:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Jul-15 01:45:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Jul-15 01:45:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Jul-15 01:45:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Jul-15 01:45:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2008-Jul-15 01:45:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Jul-15 01:45:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Jul-15 01:45:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Jul-15 01:45:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Jul-15 01:45:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Jul-15 01:45:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Jul-15 01:45:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Jul-15 01:45:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Jul-15 01:45:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Jul-15 01:45:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1670.405752" 2008-Jul-15 01:45:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Jul-15 01:45:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Jul-15 01:45:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Jul-15 01:45:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Jul-15 01:45:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Jul-15 01:45:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Jul-15 01:45:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Jul-15 01:45:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Jul-15 01:45:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Jul-15 01:45:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Jul-15 01:45:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Jul-15 01:45:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Jul-15 01:45:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Jul-15 01:45:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Jul-15 01:45:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Jul-15 01:45:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Jul-15 01:45:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Jul-15 01:45:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Jul-15 01:45:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Jul-15 01:45:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Jul-15 01:45:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Jul-15 01:45:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Jul-15 01:45:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Jul-15 01:45:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Jul-15 01:45:29 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2008-Jul-15 01:45:29 LOG4 exec_msg: From OBSERVER: config_iflo 2008-Jul-15 01:45:29 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Jul-15 01:45:29 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Jul-15 01:45:29 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Jul-15 01:45:29 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Jul-15 01:45:30 INFO1 config_iflo: Selecting receiver ALFA 2008-Jul-15 01:45:30 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2008-Jul-15 01:45:30 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2008-Jul-15 01:45:30 START begin_task: Starting task 'selecting receiver ALFA' 2008-Jul-15 01:45:30 LOG5 begin_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2008-Jul-15 01:45:30 NOTE select_receiver: Starting to select receiver ALFA 2008-Jul-15 01:45:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Jul-15 01:45:30 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Jul-15 01:45:30 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Jul-15 01:45:30 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Jul-15 01:45:30 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Jul-15 01:45:30 LOG5 finish_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2008-Jul-15 01:45:30 INFO2 finish_task: DONE finished selecting: receiver ALFA 2008-Jul-15 01:45:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-15 01:45:30 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Jul-15 01:45:30 LOG5 end_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2008-Jul-15 01:45:30 START begin_task: Starting task 'waiting for receiver ALFA' 2008-Jul-15 01:45:30 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Jul-15 01:45:30 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2008-Jul-15 01:45:30 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Jul-15 01:45:30 INFO1 config_iflo: Configuring rest of the IF/LO path 2008-Jul-15 01:45:30 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2008-Jul-15 01:45:30 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jul-15 01:45:30 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Jul-15 01:45:30 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jul-15 01:45:30 LOG5 begin_task: Level: (2) ID = <10005> Status = 0 0 0 0 ok 2008-Jul-15 01:45:30 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jul-15 01:45:30 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jul-15 01:45:30 LOG5 end_task: Level: (2) ID = <10005> Status = 0 0 0 0 ok 2008-Jul-15 01:45:30 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jul-15 01:45:30 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Jul-15 01:45:30 LOG3 vw_send: To DATATAKING: alfafb 1 2008-Jul-15 01:45:30 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2008-Jul-15 01:45:30 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Jul-15 01:45:30 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Jul-15 01:45:30 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2008-Jul-15 01:45:30 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2008-Jul-15 01:45:30 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2008-Jul-15 01:45:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1670405752.0} 2008-Jul-15 01:45:30 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2008-Jul-15 01:45:30 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2008-Jul-15 01:45:30 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Jul-15 01:45:30 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Jul-15 01:45:30 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Jul-15 01:45:30 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Jul-15 01:45:30 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Jul-15 01:45:30 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2008-Jul-15 01:45:30 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2008-Jul-15 01:45:30 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2008-Jul-15 01:45:30 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2008-Jul-15 01:45:30 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Jul-15 01:45:30 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2008-Jul-15 01:45:30 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Jul-15 01:45:30 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Jul-15 01:45:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-15 01:45:30 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Jul-15 01:45:30 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2008-Jul-15 01:45:30 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Jul-15 01:45:30 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2008-Jul-15 01:45:30 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2008-Jul-15 01:45:30 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Jul-15 01:45:30 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jul-15 01:45:30 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Jul-15 01:45:30 LOG5 begin_task: Level: (2) ID = <10006> Status = 0 0 0 0 ok 2008-Jul-15 01:45:30 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Jul-15 01:45:30 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Jul-15 01:45:30 LOG4 got_cormsg: From DATATAKING: alfafb 1 2008-Jul-15 01:45:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2008-Jul-15 01:45:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2008-Jul-15 01:45:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2008-Jul-15 01:45:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2008-Jul-15 01:45:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1670405752.0} 2008-Jul-15 01:45:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2008-Jul-15 01:45:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2008-Jul-15 01:45:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2008-Jul-15 01:45:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2008-Jul-15 01:45:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2008-Jul-15 01:45:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2008-Jul-15 01:45:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Jul-15 01:45:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2008-Jul-15 01:45:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Jul-15 01:45:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-15 01:45:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Jul-15 01:45:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2008-Jul-15 01:45:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2008-Jul-15 01:45:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2008-Jul-15 01:45:30 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jul-15 01:45:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-15 01:45:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-15 01:45:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-15 01:45:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-15 01:45:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-15 01:45:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-15 01:45:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-15 01:45:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-15 01:45:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-15 01:45:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-15 01:45:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-15 01:45:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-15 01:45:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-15 01:45:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-15 01:45:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-15 01:45:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-15 01:45:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-15 01:45:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-15 01:45:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-15 01:45:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-15 01:45:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-15 01:45:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-15 01:45:46 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jul-15 01:45:46 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Jul-15 01:45:46 LOG5 end_task: Level: (2) ID = <10006> Status = 0 0 0 0 ok 2008-Jul-15 01:45:46 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Jul-15 01:45:46 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Jul-15 01:45:46 LOG5 finish_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Jul-15 01:45:46 DONE finish_task: DONE finished configuration: IF/LO path 2008-Jul-15 01:45:46 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Jul-15 01:45:46 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Jul-15 01:45:46 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Jul-15 01:45:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-15 01:45:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Jul-15 01:45:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Jul-15 01:45:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Jul-15 01:45:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Jul-15 01:45:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Jul-15 01:45:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Jul-15 01:45:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Jul-15 01:45:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Jul-15 01:45:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Jul-15 01:45:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Jul-15 01:45:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Jul-15 01:45:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Jul-15 01:45:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Jul-15 01:45:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Jul-15 01:45:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Jul-15 01:45:47 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2008-Jul-15 01:45:47 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2008-Jul-15 01:45:47 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Jul-15 01:45:47 LOG5 begin_task: Level: (1) ID = <10007> Status = 0 0 0 0 ok 2008-Jul-15 01:45:47 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Jul-15 01:45:47 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Jul-15 01:45:47 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2008-Jul-15 01:45:47 START begin_task: Starting task 'selecting calibration port' 2008-Jul-15 01:45:47 LOG5 begin_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2008-Jul-15 01:45:47 LOG3 vw_send: To DATATAKING: calport 3 2008-Jul-15 01:45:47 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Jul-15 01:45:47 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jul-15 01:45:47 START begin_task: Starting task 'waiting on calport' 2008-Jul-15 01:45:47 LOG5 begin_task: Level: (3) ID = <10009> Status = 0 0 0 0 ok 2008-Jul-15 01:45:47 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Jul-15 01:45:47 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jul-15 01:45:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-15 01:45:47 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jul-15 01:45:47 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Jul-15 01:45:47 LOG5 end_task: Level: (3) ID = <10009> Status = 0 0 0 0 ok 2008-Jul-15 01:45:47 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Jul-15 01:45:47 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Jul-15 01:45:47 LOG5 end_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2008-Jul-15 01:45:47 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Jul-15 01:45:47 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Jul-15 01:45:47 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jul-15 01:45:47 LOG5 begin_task: Level: (2) ID = <10010> Status = 0 0 0 0 ok 2008-Jul-15 01:45:47 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jul-15 01:45:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-15 01:45:47 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jul-15 01:45:47 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jul-15 01:45:47 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jul-15 01:45:47 LOG5 end_task: Level: (2) ID = <10010> Status = 0 0 0 0 ok 2008-Jul-15 01:45:47 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Jul-15 01:45:48 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Jul-15 01:45:48 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Jul-15 01:45:48 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Jul-15 01:45:48 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Jul-15 01:45:48 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Jul-15 01:45:48 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Jul-15 01:45:48 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Jul-15 01:45:48 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 RM 2008-Jul-15 01:45:48 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 RM 2008-Jul-15 01:45:48 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 RM 2008-Jul-15 01:45:48 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 RM 2008-Jul-15 01:45:48 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Jul-15 01:45:48 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Jul-15 01:45:48 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jul-15 01:45:48 LOG5 begin_task: Level: (2) ID = <10011> Status = 0 0 0 0 ok 2008-Jul-15 01:45:48 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jul-15 01:45:48 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jul-15 01:45:48 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jul-15 01:45:48 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jul-15 01:45:48 LOG5 end_task: Level: (2) ID = <10011> Status = 0 0 0 0 ok 2008-Jul-15 01:45:48 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 RM 2008-Jul-15 01:45:48 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 RM 2008-Jul-15 01:45:48 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 RM 2008-Jul-15 01:45:48 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 RM 2008-Jul-15 01:45:48 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Jul-15 01:45:48 LOG5 finish_task: Level: (1) ID = <10007> Status = 0 0 0 0 ok 2008-Jul-15 01:45:48 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Jul-15 01:45:48 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Jul-15 01:45:48 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Jul-15 01:45:48 LOG5 end_task: Level: (1) ID = <10007> Status = 0 0 0 0 ok 2008-Jul-15 01:45:48 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 RM' 2008-Jul-15 01:45:48 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Jul-15 01:45:48 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Jul-15 01:45:48 NOTE CIMA-load_config_file: Configuration file 'ages_alfafu.conf' applied. 2008-Jul-15 01:45:48 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 RM' 2008-Jul-15 01:45:49 NOTE WAPPDATA-new_file: New FITS file: wapp.20080715.a2048.0000.fits 2008-Jul-15 01:45:49 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20080715.a2048.0000.fits} 2008-Jul-15 01:46:35 COMMAND CIMA-send_to_exec: Sending command to point to a source 2008-Jul-15 01:46:35 LOG4 exec_msg: From OBSERVER: track_new_source J223354+243117 223354.8 243117 J 0 0 main small /share/obs4/usr/a2048/n7332fu.cat 10011 Topocentric velocity(optical) 0 0 0 0 0 2008-Jul-15 01:46:35 LOG1 track_new_source: Calling 'track_new_source J223354+243117 223354.8 243117 J 0 0 main small /share/obs4/usr/a2048/n7332fu.cat 10011 Topocentric velocity(optical) 0 0 0 0 0' 2008-Jul-15 01:46:35 BEGIN begin_task: Starting task 'selecting new source' 2008-Jul-15 01:46:35 LOG5 begin_task: Level: (1) ID = <10012> Status = 0 0 0 0 ok 2008-Jul-15 01:46:35 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {J223354+243117} INFO {Selecting source 'J223354+243117' ...} 2008-Jul-15 01:46:35 LOG3 track_source: Calling 'track_source J223354+243117 223354.8 243117 J 0 0 main small /share/obs4/usr/a2048/n7332fu.cat 10011 Topocentric velocity(optical)' 2008-Jul-15 01:46:35 START begin_task: Starting task 'sending tracking commands' 2008-Jul-15 01:46:35 LOG5 begin_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2008-Jul-15 01:46:35 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {J223354+243117} INFO {Slewing to source 'J223354+243117' ...} 2008-Jul-15 01:46:35 INFO1 track_source: Starting to track J223354+243117 2008-Jul-15 01:46:35 LOG3 vw_send: To DATATAKING: hdrldsrcnm "J223354+243117" 2008-Jul-15 01:46:35 LOG3 vw_send: To DATATAKING: set ra 223354.8 2008-Jul-15 01:46:35 LOG3 vw_send: To DATATAKING: set dec 243117 2008-Jul-15 01:46:35 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Jul-15 01:46:35 LOG3 vw_send: To DATATAKING: pnt tr 223354.8 243117 -CJ 2008-Jul-15 01:46:35 LOG3 vw_send: To DATATAKING: dopsetvel 10011 topo 2008-Jul-15 01:46:35 STOP finish_task: Finishing task 'sending tracking commands' 2008-Jul-15 01:46:35 LOG5 finish_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2008-Jul-15 01:46:35 INFO2 finish_task: DONE finished sending: tracking commands 2008-Jul-15 01:46:35 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-15 01:46:35 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Jul-15 01:46:35 LOG5 end_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2008-Jul-15 01:46:35 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2008-Jul-15 01:46:35 START begin_task: Starting task 'applying pointing corrections' 2008-Jul-15 01:46:35 LOG5 begin_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2008-Jul-15 01:46:35 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2008-Jul-15 01:46:35 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2008-Jul-15 01:46:35 STOP finish_task: Finishing task 'applying pointing corrections' 2008-Jul-15 01:46:35 LOG5 finish_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2008-Jul-15 01:46:35 INFO2 finish_task: DONE finished applying: pointing corrections 2008-Jul-15 01:46:35 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-15 01:46:35 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2008-Jul-15 01:46:35 LOG5 end_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2008-Jul-15 01:46:35 STOP finish_task: Finishing task 'selecting new source' 2008-Jul-15 01:46:35 LOG5 finish_task: Level: (1) ID = <10012> Status = 0 0 0 0 ok 2008-Jul-15 01:46:35 DONE finish_task: DONE finished selecting: new source 2008-Jul-15 01:46:35 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Jul-15 01:46:35 END end_task: Finishing task 'selecting new source' with status 'OK' 2008-Jul-15 01:46:35 LOG5 end_task: Level: (1) ID = <10012> Status = 0 0 0 0 ok 2008-Jul-15 01:46:35 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "J223354+243117" 2008-Jul-15 01:46:35 LOG4 got_cormsg: From DATATAKING: set ra 223354.8 2008-Jul-15 01:46:35 LOG4 got_cormsg: From DATATAKING: set dec 243117 2008-Jul-15 01:46:35 LOG4 got_cormsg: From DATATAKING: vw% 223354.8 2008-Jul-15 01:46:35 LOG4 got_cormsg: From DATATAKING: vw% 243117 2008-Jul-15 01:46:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-15 01:46:35 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Jul-15 01:46:35 LOG4 got_cormsg: From DATATAKING: pnt tr 223354.8 243117 -CJ 2008-Jul-15 01:46:35 LOG4 got_cormsg: From DATATAKING: dopsetvel 10011 topo 2008-Jul-15 01:46:35 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Jul-15 01:46:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-15 01:46:35 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2008-Jul-15 01:46:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-15 01:46:51 COMMAND CIMA-send_to_exec: Sending command to run standard on/off 2008-Jul-15 01:46:51 LOG4 exec_msg: From OBSERVER: onoff 1 300 60 hcorcal 10 each first 0 2008-Jul-15 01:46:51 LOG1 onoff_wapp: Calling 'onoff_wapp 1 300 60 hcorcal 10 each first 0' 2008-Jul-15 01:46:51 BEGIN begin_task: Starting task 'standard on/off' 2008-Jul-15 01:46:51 LOG5 begin_task: Level: (1) ID = <10015> Status = 0 0 0 0 ok 2008-Jul-15 01:46:51 INFO4 begin_task: MAKING 'standard on/off' using 'alfa' + 'WAPP' on 'J223354+243117' 2008-Jul-15 01:46:51 INFO1 onoff_wapp: Starting pattern: Standard on/off 2008-Jul-15 01:46:51 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Standard on/off} TOTALLOOPS 1 INFO {Starting standard on/off observation ...} 2008-Jul-15 01:46:51 START begin_task: Starting task 'waiting on telescope' 2008-Jul-15 01:46:51 LOG5 begin_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2008-Jul-15 01:46:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Jul-15 01:46:51 LOG3 waittrk: Start waittrk 5 2008-Jul-15 01:46:51 START begin_task: Starting task 'waiting on telescope movement' 2008-Jul-15 01:46:51 LOG5 begin_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2008-Jul-15 01:46:56 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Jul-15 01:46:56 LOG5 end_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2008-Jul-15 01:46:56 START begin_task: Starting task 'waiting on telescope on source' 2008-Jul-15 01:46:56 LOG5 begin_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2008-Jul-15 01:46:59 COMMAND CIMA-send_to_exec: Sending command to abort observation 2008-Jul-15 01:46:59 LOG4 exec_msg: From OBSERVER: abort_task abort 2008-Jul-15 01:46:59 WARNING abort_task: WARNING abort requested! 2008-Jul-15 01:46:59 WARNING abort_task: WARNING Aborting wait for waiting on telescope on source 2008-Jul-15 01:46:59 STOP end_task: Finishing task 'waiting on telescope on source' with status 'ABORT' 2008-Jul-15 01:46:59 LOG5 end_task: Level: (3) ID = <10018> Status = 1 0 0 0 abort 2008-Jul-15 01:46:59 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Jul-15 01:46:59 LOG4 waittrk: Current telescope position: Az = 482.03 ZA = 15.62 2008-Jul-15 01:46:59 STOP finish_task: Finishing task 'waiting on telescope' 2008-Jul-15 01:46:59 LOG5 finish_task: Level: (2) ID = <10016> Status = 1 0 0 0 abort 2008-Jul-15 01:46:59 WARNING finish_task: WARNING aborted waiting: telescope on source 2008-Jul-15 01:46:59 LOG4 send_obs_status: To obs_status: <0> ENDTASK Aborted 2008-Jul-15 01:46:59 STOP end_task: Finishing task 'waiting on telescope' with status 'ABORT' 2008-Jul-15 01:46:59 LOG5 end_task: Level: (2) ID = <10016> Status = 1 0 0 0 abort 2008-Jul-15 01:46:59 STOP finish_task: Finishing task 'standard on/off' 2008-Jul-15 01:46:59 LOG5 finish_task: Level: (1) ID = <10015> Status = 1 0 0 0 abort 2008-Jul-15 01:46:59 WARNING finish_task: WARNING aborted pattern: standard on/off 2008-Jul-15 01:46:59 LOG4 send_obs_status: To obs_status: <1> ENDTASK Aborted 2008-Jul-15 01:46:59 END end_task: Finishing task 'standard on/off' with status 'ABORT' 2008-Jul-15 01:46:59 LOG5 end_task: Level: (1) ID = <10015> Status = 1 0 0 0 abort 2008-Jul-15 01:47:07 INFO4 CIMA-antvel: Computed apparent RA = 22:34:20.7 Dec = +24:33:55.4 from RA = 22:33:54.8 Dec = +24:31:17.0 Epoch = 2008.53956 J 2008-Jul-15 01:47:07 INFO4 CIMA-antvel: Parameters to Doppler: Topocentric 20826.0 2008 197 0 2008-Jul-15 01:47:07 INFO3 CIMA-antvel: Computed velocity correction 0.0000000000 2008-Jul-15 01:47:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Jul-15 01:47:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Jul-15 01:47:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Jul-15 01:47:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Jul-15 01:47:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Jul-15 01:47:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2008-Jul-15 01:47:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Jul-15 01:47:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786" 2008-Jul-15 01:47:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786" 2008-Jul-15 01:47:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786" 2008-Jul-15 01:47:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786" 2008-Jul-15 01:47:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786" 2008-Jul-15 01:47:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786" 2008-Jul-15 01:47:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786" 2008-Jul-15 01:47:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786" 2008-Jul-15 01:47:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786" 2008-Jul-15 01:47:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Jul-15 01:47:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Jul-15 01:47:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Jul-15 01:47:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Jul-15 01:47:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Jul-15 01:47:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Jul-15 01:47:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Jul-15 01:47:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Jul-15 01:47:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Jul-15 01:47:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Jul-15 01:47:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Jul-15 01:47:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Jul-15 01:47:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Jul-15 01:47:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2008-Jul-15 01:47:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "on" 2008-Jul-15 01:47:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Jul-15 01:47:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Jul-15 01:47:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Jul-15 01:47:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Jul-15 01:47:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Jul-15 01:47:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Jul-15 01:47:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Jul-15 01:47:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Jul-15 01:47:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1624.506710" 2008-Jul-15 01:47:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Jul-15 01:47:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Jul-15 01:47:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Jul-15 01:47:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Jul-15 01:47:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Jul-15 01:47:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Jul-15 01:47:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Jul-15 01:47:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Jul-15 01:47:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Jul-15 01:47:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Jul-15 01:47:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Jul-15 01:47:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Jul-15 01:47:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Jul-15 01:47:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Jul-15 01:47:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Jul-15 01:47:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Jul-15 01:47:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Jul-15 01:47:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Jul-15 01:47:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Jul-15 01:47:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Jul-15 01:47:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Jul-15 01:47:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Jul-15 01:47:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Jul-15 01:47:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Jul-15 01:47:08 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2008-Jul-15 01:47:08 LOG4 exec_msg: From OBSERVER: config_iflo 2008-Jul-15 01:47:08 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Jul-15 01:47:08 LOG5 begin_task: Level: (1) ID = <10019> Status = 0 0 0 0 ok 2008-Jul-15 01:47:09 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Jul-15 01:47:09 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Jul-15 01:47:09 LOG1 config_iflo: Receiver ALFA already selected 2008-Jul-15 01:47:09 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jul-15 01:47:09 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Jul-15 01:47:09 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jul-15 01:47:09 LOG5 begin_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2008-Jul-15 01:47:09 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jul-15 01:47:09 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jul-15 01:47:09 LOG5 end_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2008-Jul-15 01:47:09 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jul-15 01:47:09 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Jul-15 01:47:09 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2008-Jul-15 01:47:09 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2008-Jul-15 01:47:09 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Jul-15 01:47:09 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Jul-15 01:47:09 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2008-Jul-15 01:47:09 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2008-Jul-15 01:47:09 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2008-Jul-15 01:47:09 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1624506710.0} 2008-Jul-15 01:47:09 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2008-Jul-15 01:47:09 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2008-Jul-15 01:47:09 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Jul-15 01:47:09 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Jul-15 01:47:09 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Jul-15 01:47:09 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Jul-15 01:47:09 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Jul-15 01:47:09 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2008-Jul-15 01:47:09 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2008-Jul-15 01:47:09 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2008-Jul-15 01:47:09 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2008-Jul-15 01:47:09 LOG3 send_ifx: Skipping if2-command 'if2_gain 8 8' since system already is properly set 2008-Jul-15 01:47:09 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2008-Jul-15 01:47:09 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2008-Jul-15 01:47:09 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Jul-15 01:47:09 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-15 01:47:09 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2008-Jul-15 01:47:09 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2008-Jul-15 01:47:09 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Jul-15 01:47:09 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2008-Jul-15 01:47:09 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2008-Jul-15 01:47:09 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Jul-15 01:47:09 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jul-15 01:47:09 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Jul-15 01:47:09 LOG5 begin_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2008-Jul-15 01:47:09 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1624506710.0} 2008-Jul-15 01:47:09 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-15 01:47:09 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jul-15 01:47:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-15 01:47:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-15 01:47:09 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jul-15 01:47:09 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Jul-15 01:47:09 LOG5 end_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2008-Jul-15 01:47:09 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Jul-15 01:47:09 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Jul-15 01:47:09 LOG5 finish_task: Level: (1) ID = <10019> Status = 0 0 0 0 ok 2008-Jul-15 01:47:09 DONE finish_task: DONE finished configuration: IF/LO path 2008-Jul-15 01:47:09 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Jul-15 01:47:09 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Jul-15 01:47:09 LOG5 end_task: Level: (1) ID = <10019> Status = 0 0 0 0 ok 2008-Jul-15 01:47:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-15 01:47:11 INFO4 CIMA-antvel: Computed apparent RA = 22:34:20.7 Dec = +24:33:55.4 from RA = 22:33:54.8 Dec = +24:31:17.0 Epoch = 2008.53956 J 2008-Jul-15 01:47:11 INFO4 CIMA-antvel: Parameters to Doppler: Topocentric 20831.0 2008 197 0 2008-Jul-15 01:47:11 INFO3 CIMA-antvel: Computed velocity correction 0.0000000000 2008-Jul-15 01:47:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Jul-15 01:47:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Jul-15 01:47:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Jul-15 01:47:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Jul-15 01:47:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Jul-15 01:47:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2008-Jul-15 01:47:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Jul-15 01:47:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786" 2008-Jul-15 01:47:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786" 2008-Jul-15 01:47:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786" 2008-Jul-15 01:47:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786" 2008-Jul-15 01:47:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786" 2008-Jul-15 01:47:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786" 2008-Jul-15 01:47:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786" 2008-Jul-15 01:47:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786" 2008-Jul-15 01:47:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786" 2008-Jul-15 01:47:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Jul-15 01:47:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Jul-15 01:47:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Jul-15 01:47:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Jul-15 01:47:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Jul-15 01:47:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Jul-15 01:47:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Jul-15 01:47:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Jul-15 01:47:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Jul-15 01:47:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Jul-15 01:47:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Jul-15 01:47:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Jul-15 01:47:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Jul-15 01:47:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2008-Jul-15 01:47:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "on" 2008-Jul-15 01:47:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Jul-15 01:47:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Jul-15 01:47:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Jul-15 01:47:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Jul-15 01:47:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Jul-15 01:47:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Jul-15 01:47:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Jul-15 01:47:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Jul-15 01:47:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1624.506710" 2008-Jul-15 01:47:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Jul-15 01:47:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Jul-15 01:47:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Jul-15 01:47:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Jul-15 01:47:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Jul-15 01:47:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Jul-15 01:47:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Jul-15 01:47:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Jul-15 01:47:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Jul-15 01:47:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Jul-15 01:47:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Jul-15 01:47:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Jul-15 01:47:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Jul-15 01:47:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Jul-15 01:47:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Jul-15 01:47:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Jul-15 01:47:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Jul-15 01:47:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Jul-15 01:47:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Jul-15 01:47:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Jul-15 01:47:12 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Jul-15 01:47:12 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Jul-15 01:47:12 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Jul-15 01:47:12 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Jul-15 01:47:13 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2008-Jul-15 01:47:13 LOG4 exec_msg: From OBSERVER: config_iflo 2008-Jul-15 01:47:13 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Jul-15 01:47:13 LOG5 begin_task: Level: (1) ID = <10022> Status = 0 0 0 0 ok 2008-Jul-15 01:47:13 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Jul-15 01:47:13 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Jul-15 01:47:13 LOG1 config_iflo: Receiver ALFA already selected 2008-Jul-15 01:47:13 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jul-15 01:47:13 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Jul-15 01:47:13 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jul-15 01:47:13 LOG5 begin_task: Level: (2) ID = <10023> Status = 0 0 0 0 ok 2008-Jul-15 01:47:13 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jul-15 01:47:13 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jul-15 01:47:13 LOG5 end_task: Level: (2) ID = <10023> Status = 0 0 0 0 ok 2008-Jul-15 01:47:13 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jul-15 01:47:13 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Jul-15 01:47:13 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2008-Jul-15 01:47:13 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2008-Jul-15 01:47:13 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Jul-15 01:47:13 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Jul-15 01:47:13 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2008-Jul-15 01:47:13 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2008-Jul-15 01:47:13 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2008-Jul-15 01:47:13 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1624506710.0} 2008-Jul-15 01:47:13 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2008-Jul-15 01:47:13 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2008-Jul-15 01:47:13 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Jul-15 01:47:13 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Jul-15 01:47:13 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Jul-15 01:47:13 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Jul-15 01:47:13 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Jul-15 01:47:13 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2008-Jul-15 01:47:13 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2008-Jul-15 01:47:13 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2008-Jul-15 01:47:13 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2008-Jul-15 01:47:13 LOG3 send_ifx: Skipping if2-command 'if2_gain 8 8' since system already is properly set 2008-Jul-15 01:47:13 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2008-Jul-15 01:47:13 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2008-Jul-15 01:47:13 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Jul-15 01:47:13 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-15 01:47:13 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2008-Jul-15 01:47:13 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2008-Jul-15 01:47:13 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Jul-15 01:47:13 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2008-Jul-15 01:47:13 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2008-Jul-15 01:47:13 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Jul-15 01:47:13 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jul-15 01:47:13 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Jul-15 01:47:13 LOG5 begin_task: Level: (2) ID = <10024> Status = 0 0 0 0 ok 2008-Jul-15 01:47:13 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1624506710.0} 2008-Jul-15 01:47:13 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-15 01:47:13 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jul-15 01:47:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-15 01:47:13 LOG4 got_cormsg: From DATATAKING: vw% DONE 2008-Jul-15 01:47:13 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Jul-15 01:47:13 LOG5 end_task: Level: (2) ID = <10024> Status = 0 0 0 0 ok 2008-Jul-15 01:47:13 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Jul-15 01:47:13 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Jul-15 01:47:13 LOG5 finish_task: Level: (1) ID = <10022> Status = 0 0 0 0 ok 2008-Jul-15 01:47:13 DONE finish_task: DONE finished configuration: IF/LO path 2008-Jul-15 01:47:13 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Jul-15 01:47:13 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Jul-15 01:47:13 LOG5 end_task: Level: (1) ID = <10022> Status = 0 0 0 0 ok 2008-Jul-15 01:47:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-15 01:47:16 COMMAND CIMA-send_to_exec: Sending command to point to a source 2008-Jul-15 01:47:16 LOG4 exec_msg: From OBSERVER: track_new_source J223354+243117 223354.8 243117 J 0 0 main small /share/obs4/usr/a2048/n7332fu.cat 10011 Topocentric velocity(optical) 0 0 0 0 0 2008-Jul-15 01:47:16 LOG1 track_new_source: Calling 'track_new_source J223354+243117 223354.8 243117 J 0 0 main small /share/obs4/usr/a2048/n7332fu.cat 10011 Topocentric velocity(optical) 0 0 0 0 0' 2008-Jul-15 01:47:16 BEGIN begin_task: Starting task 'selecting new source' 2008-Jul-15 01:47:16 LOG5 begin_task: Level: (1) ID = <10025> Status = 0 0 0 0 ok 2008-Jul-15 01:47:16 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {J223354+243117} INFO {Selecting source 'J223354+243117' ...} 2008-Jul-15 01:47:16 LOG3 track_source: Calling 'track_source J223354+243117 223354.8 243117 J 0 0 main small /share/obs4/usr/a2048/n7332fu.cat 10011 Topocentric velocity(optical)' 2008-Jul-15 01:47:16 START begin_task: Starting task 'sending tracking commands' 2008-Jul-15 01:47:16 LOG5 begin_task: Level: (2) ID = <10026> Status = 0 0 0 0 ok 2008-Jul-15 01:47:16 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {J223354+243117} INFO {Slewing to source 'J223354+243117' ...} 2008-Jul-15 01:47:16 INFO1 track_source: Starting to track J223354+243117 2008-Jul-15 01:47:16 LOG3 vw_send: To DATATAKING: hdrldsrcnm "J223354+243117" 2008-Jul-15 01:47:16 LOG3 vw_send: To DATATAKING: set ra 223354.8 2008-Jul-15 01:47:16 LOG3 vw_send: To DATATAKING: set dec 243117 2008-Jul-15 01:47:16 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Jul-15 01:47:16 LOG3 vw_send: To DATATAKING: pnt tr 223354.8 243117 -CJ 2008-Jul-15 01:47:16 LOG3 vw_send: To DATATAKING: dopsetvel 10011 topo 2008-Jul-15 01:47:16 STOP finish_task: Finishing task 'sending tracking commands' 2008-Jul-15 01:47:16 LOG5 finish_task: Level: (2) ID = <10026> Status = 0 0 0 0 ok 2008-Jul-15 01:47:16 INFO2 finish_task: DONE finished sending: tracking commands 2008-Jul-15 01:47:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-15 01:47:16 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Jul-15 01:47:16 LOG5 end_task: Level: (2) ID = <10026> Status = 0 0 0 0 ok 2008-Jul-15 01:47:16 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2008-Jul-15 01:47:16 START begin_task: Starting task 'applying pointing corrections' 2008-Jul-15 01:47:16 LOG5 begin_task: Level: (2) ID = <10027> Status = 0 0 0 0 ok 2008-Jul-15 01:47:16 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2008-Jul-15 01:47:16 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2008-Jul-15 01:47:16 STOP finish_task: Finishing task 'applying pointing corrections' 2008-Jul-15 01:47:16 LOG5 finish_task: Level: (2) ID = <10027> Status = 0 0 0 0 ok 2008-Jul-15 01:47:16 INFO2 finish_task: DONE finished applying: pointing corrections 2008-Jul-15 01:47:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-15 01:47:16 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2008-Jul-15 01:47:16 LOG5 end_task: Level: (2) ID = <10027> Status = 0 0 0 0 ok 2008-Jul-15 01:47:16 STOP finish_task: Finishing task 'selecting new source' 2008-Jul-15 01:47:16 LOG5 finish_task: Level: (1) ID = <10025> Status = 0 0 0 0 ok 2008-Jul-15 01:47:16 DONE finish_task: DONE finished selecting: new source 2008-Jul-15 01:47:16 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Jul-15 01:47:16 END end_task: Finishing task 'selecting new source' with status 'OK' 2008-Jul-15 01:47:17 LOG5 end_task: Level: (1) ID = <10025> Status = 0 0 0 0 ok 2008-Jul-15 01:47:17 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "J223354+243117" 2008-Jul-15 01:47:17 LOG4 got_cormsg: From DATATAKING: set ra 223354.8 2008-Jul-15 01:47:17 LOG4 got_cormsg: From DATATAKING: set dec 243117 2008-Jul-15 01:47:17 LOG4 got_cormsg: From DATATAKING: vw% 223354.8 2008-Jul-15 01:47:17 LOG4 got_cormsg: From DATATAKING: vw% 243117 2008-Jul-15 01:47:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-15 01:47:17 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Jul-15 01:47:17 LOG4 got_cormsg: From DATATAKING: pnt tr 223354.8 243117 -CJ 2008-Jul-15 01:47:17 LOG4 got_cormsg: From DATATAKING: dopsetvel 10011 topo 2008-Jul-15 01:47:17 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Jul-15 01:47:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-15 01:47:17 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2008-Jul-15 01:47:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-15 01:47:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Jul-15 01:47:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Jul-15 01:47:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Jul-15 01:47:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Jul-15 01:47:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Jul-15 01:47:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Jul-15 01:47:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Jul-15 01:47:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Jul-15 01:47:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Jul-15 01:47:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Jul-15 01:47:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Jul-15 01:47:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Jul-15 01:47:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Jul-15 01:47:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Jul-15 01:47:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Jul-15 01:47:24 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2008-Jul-15 01:47:24 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2008-Jul-15 01:47:24 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Jul-15 01:47:24 LOG5 begin_task: Level: (1) ID = <10028> Status = 0 0 0 0 ok 2008-Jul-15 01:47:24 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Jul-15 01:47:24 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Jul-15 01:47:24 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2008-Jul-15 01:47:24 START begin_task: Starting task 'selecting calibration port' 2008-Jul-15 01:47:24 LOG5 begin_task: Level: (2) ID = <10029> Status = 0 0 0 0 ok 2008-Jul-15 01:47:24 LOG3 vw_send: To DATATAKING: calport 3 2008-Jul-15 01:47:24 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Jul-15 01:47:24 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jul-15 01:47:24 START begin_task: Starting task 'waiting on calport' 2008-Jul-15 01:47:24 LOG5 begin_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2008-Jul-15 01:47:24 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Jul-15 01:47:24 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jul-15 01:47:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-15 01:47:25 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jul-15 01:47:25 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Jul-15 01:47:25 LOG5 end_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2008-Jul-15 01:47:25 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Jul-15 01:47:25 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Jul-15 01:47:25 LOG5 end_task: Level: (2) ID = <10029> Status = 0 0 0 0 ok 2008-Jul-15 01:47:25 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Jul-15 01:47:25 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Jul-15 01:47:25 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jul-15 01:47:25 LOG5 begin_task: Level: (2) ID = <10031> Status = 0 0 0 0 ok 2008-Jul-15 01:47:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-15 01:47:25 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jul-15 01:47:25 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jul-15 01:47:25 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jul-15 01:47:25 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jul-15 01:47:25 LOG5 end_task: Level: (2) ID = <10031> Status = 0 0 0 0 ok 2008-Jul-15 01:47:25 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Jul-15 01:47:25 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Jul-15 01:47:25 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Jul-15 01:47:25 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Jul-15 01:47:25 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Jul-15 01:47:25 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Jul-15 01:47:25 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Jul-15 01:47:25 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Jul-15 01:47:25 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 RM 2008-Jul-15 01:47:25 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 RM 2008-Jul-15 01:47:25 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 RM 2008-Jul-15 01:47:25 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 RM 2008-Jul-15 01:47:25 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Jul-15 01:47:25 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Jul-15 01:47:25 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jul-15 01:47:25 LOG5 begin_task: Level: (2) ID = <10032> Status = 0 0 0 0 ok 2008-Jul-15 01:47:25 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jul-15 01:47:25 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jul-15 01:47:25 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jul-15 01:47:25 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jul-15 01:47:25 LOG5 end_task: Level: (2) ID = <10032> Status = 0 0 0 0 ok 2008-Jul-15 01:47:25 LOG3 sock_errsend: To WAPPDATA: FLUSH 2008-Jul-15 01:47:25 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Jul-15 01:47:25 LOG5 finish_task: Level: (1) ID = <10028> Status = 0 0 0 0 ok 2008-Jul-15 01:47:25 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Jul-15 01:47:25 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Jul-15 01:47:25 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Jul-15 01:47:25 LOG5 end_task: Level: (1) ID = <10028> Status = 0 0 0 0 ok 2008-Jul-15 01:47:25 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Jul-15 01:47:25 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Jul-15 01:47:25 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Jul-15 01:47:25 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 RM' 2008-Jul-15 01:47:28 COMMAND CIMA-send_to_exec: Sending command to run standard on/off 2008-Jul-15 01:47:28 LOG4 exec_msg: From OBSERVER: onoff 1 300 60 hcorcal 10 each first 0 2008-Jul-15 01:47:28 LOG1 onoff_wapp: Calling 'onoff_wapp 1 300 60 hcorcal 10 each first 0' 2008-Jul-15 01:47:28 BEGIN begin_task: Starting task 'standard on/off' 2008-Jul-15 01:47:28 LOG5 begin_task: Level: (1) ID = <10033> Status = 0 0 0 0 ok 2008-Jul-15 01:47:28 INFO4 begin_task: MAKING 'standard on/off' using 'alfa' + 'WAPP' on 'J223354+243117' 2008-Jul-15 01:47:28 INFO1 onoff_wapp: Starting pattern: Standard on/off 2008-Jul-15 01:47:28 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Standard on/off} TOTALLOOPS 1 INFO {Starting standard on/off observation ...} 2008-Jul-15 01:47:28 START begin_task: Starting task 'waiting on telescope' 2008-Jul-15 01:47:28 LOG5 begin_task: Level: (2) ID = <10034> Status = 0 0 0 0 ok 2008-Jul-15 01:47:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Jul-15 01:47:28 LOG3 waittrk: Start waittrk 5 2008-Jul-15 01:47:28 START begin_task: Starting task 'waiting on telescope movement' 2008-Jul-15 01:47:28 LOG5 begin_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2008-Jul-15 01:47:33 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Jul-15 01:47:33 LOG5 end_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2008-Jul-15 01:47:33 START begin_task: Starting task 'waiting on telescope on source' 2008-Jul-15 01:47:33 LOG5 begin_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2008-Jul-15 01:47:55 NOTE CIMA-save_config_file: CIMA configuration saved to file 'ages_alfafu.conf' 2008-Jul-15 01:48:25 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.16) to the zenith angle limit 19.69 degrees! 2008-Jul-15 01:48:25 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 517.4364 19.1599 RA/Dec = 22:33:55 +24:31:17 2008-Jul-15 01:49:55 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.69) to the zenith angle limit 19.69 degrees! 2008-Jul-15 01:49:55 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 554.9383 19.6900 RA/Dec = 22:33:55 +24:31:17 2008-Jul-15 01:50:25 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.69) to the zenith angle limit 19.69 degrees! 2008-Jul-15 01:50:25 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 567.4399 19.6900 RA/Dec = 22:33:55 +24:31:17 2008-Jul-15 01:50:55 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.69) to the zenith angle limit 19.69 degrees! 2008-Jul-15 01:50:55 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 579.9407 19.6900 RA/Dec = 22:33:55 +24:31:17 2008-Jul-15 01:51:25 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.69) to the zenith angle limit 19.69 degrees! 2008-Jul-15 01:51:25 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 592.4405 19.6900 RA/Dec = 22:33:55 +24:31:17 2008-Jul-15 01:51:55 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.69) to the zenith angle limit 19.69 degrees! 2008-Jul-15 01:51:55 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 604.9420 19.6900 RA/Dec = 22:33:55 +24:31:17 2008-Jul-15 01:52:25 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.69) to the zenith angle limit 19.69 degrees! 2008-Jul-15 01:52:25 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 609.7213 19.6900 RA/Dec = 22:33:55 +24:31:17 2008-Jul-15 01:52:55 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.69) to the zenith angle limit 19.69 degrees! 2008-Jul-15 01:52:55 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 609.6651 19.6900 RA/Dec = 22:33:55 +24:31:17 2008-Jul-15 01:53:25 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.69) to the zenith angle limit 19.69 degrees! 2008-Jul-15 01:53:25 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 609.6083 19.6900 RA/Dec = 22:33:55 +24:31:17 2008-Jul-15 01:53:55 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.69) to the zenith angle limit 19.69 degrees! 2008-Jul-15 01:53:55 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 609.5497 19.6899 RA/Dec = 22:33:55 +24:31:17 2008-Jul-15 01:54:25 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.69) to the zenith angle limit 19.69 degrees! 2008-Jul-15 01:54:25 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 609.4906 19.6900 RA/Dec = 22:33:55 +24:31:17 2008-Jul-15 01:54:55 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.69) to the zenith angle limit 19.69 degrees! 2008-Jul-15 01:54:55 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 609.4295 19.6900 RA/Dec = 22:33:55 +24:31:17 2008-Jul-15 01:55:25 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.69) to the zenith angle limit 19.69 degrees! 2008-Jul-15 01:55:25 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 609.3688 19.6901 RA/Dec = 22:33:55 +24:31:17 2008-Jul-15 01:55:55 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.69) to the zenith angle limit 19.69 degrees! 2008-Jul-15 01:55:55 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 609.3074 19.6900 RA/Dec = 22:33:55 +24:31:17 2008-Jul-15 01:56:25 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.69) to the zenith angle limit 19.69 degrees! 2008-Jul-15 01:56:25 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 609.2448 19.6901 RA/Dec = 22:33:55 +24:31:17 2008-Jul-15 01:56:55 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.69) to the zenith angle limit 19.69 degrees! 2008-Jul-15 01:56:55 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 609.1815 19.6900 RA/Dec = 22:33:55 +24:31:17 2008-Jul-15 01:57:25 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.69) to the zenith angle limit 19.69 degrees! 2008-Jul-15 01:57:25 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 609.1175 19.6901 RA/Dec = 22:33:55 +24:31:17 2008-Jul-15 01:57:55 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.69) to the zenith angle limit 19.69 degrees! 2008-Jul-15 01:57:55 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 609.0529 19.6900 RA/Dec = 22:33:55 +24:31:17 2008-Jul-15 01:58:25 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.69) to the zenith angle limit 19.69 degrees! 2008-Jul-15 01:58:25 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 608.9869 19.6901 RA/Dec = 22:33:55 +24:31:17 2008-Jul-15 01:58:55 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.69) to the zenith angle limit 19.69 degrees! 2008-Jul-15 01:58:55 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 608.9202 19.6900 RA/Dec = 22:33:55 +24:31:17 2008-Jul-15 01:59:25 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.69) to the zenith angle limit 19.69 degrees! 2008-Jul-15 01:59:25 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 608.8525 19.6901 RA/Dec = 22:33:55 +24:31:17 2008-Jul-15 01:59:55 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.69) to the zenith angle limit 19.69 degrees! 2008-Jul-15 01:59:55 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 608.7836 19.6900 RA/Dec = 22:33:55 +24:31:17 2008-Jul-15 02:00:25 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.69) to the zenith angle limit 19.69 degrees! 2008-Jul-15 02:00:25 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 608.7135 19.6901 RA/Dec = 22:33:55 +24:31:17 2008-Jul-15 02:00:55 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.69) to the zenith angle limit 19.69 degrees! 2008-Jul-15 02:00:55 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 608.6427 19.6900 RA/Dec = 22:33:55 +24:31:17 2008-Jul-15 02:01:25 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.69) to the zenith angle limit 19.69 degrees! 2008-Jul-15 02:01:25 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 608.5706 19.6901 RA/Dec = 22:33:55 +24:31:17 2008-Jul-15 02:01:55 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.69) to the zenith angle limit 19.69 degrees! 2008-Jul-15 02:01:55 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 608.4978 19.6900 RA/Dec = 22:33:55 +24:31:17 2008-Jul-15 02:02:25 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.69) to the zenith angle limit 19.69 degrees! 2008-Jul-15 02:02:25 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 608.4243 19.6900 RA/Dec = 22:33:55 +24:31:17 2008-Jul-15 02:02:33 ERROR end_wait_seconds: ERROR timed out while waiting for telescope on source! 2008-Jul-15 02:02:33 LOG1 task_failed: Task 'waiting on telescope on source' failed! 2008-Jul-15 02:02:33 LOG5 task_failed: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2008-Jul-15 02:02:33 STOP end_task: Finishing task 'waiting on telescope on source' with status 'FAILED' 2008-Jul-15 02:02:33 LOG5 end_task: Level: (3) ID = <10036> Status = 0 0 0 1 failed 2008-Jul-15 02:02:33 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Jul-15 02:02:33 LOG4 waittrk: Current telescope position: Az = 608.41 ZA = 19.69 2008-Jul-15 02:02:33 STOP finish_task: Finishing task 'waiting on telescope' 2008-Jul-15 02:02:33 LOG5 finish_task: Level: (2) ID = <10034> Status = 0 0 0 1 failed 2008-Jul-15 02:02:33 ERROR finish_task: ERROR failed waiting: telescope on source 2008-Jul-15 02:02:33 LOG4 send_obs_status: To obs_status: <0> ENDTASK Failed 2008-Jul-15 02:02:33 STOP end_task: Finishing task 'waiting on telescope' with status 'FAILED' 2008-Jul-15 02:02:33 LOG5 end_task: Level: (2) ID = <10034> Status = 0 0 0 1 failed 2008-Jul-15 02:02:33 STOP finish_task: Finishing task 'standard on/off' 2008-Jul-15 02:02:33 LOG5 finish_task: Level: (1) ID = <10033> Status = 0 0 0 1 failed 2008-Jul-15 02:02:33 ERROR finish_task: ERROR failed pattern: standard on/off 2008-Jul-15 02:02:33 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2008-Jul-15 02:02:33 END end_task: Finishing task 'standard on/off' with status 'FAILED' 2008-Jul-15 02:02:33 LOG5 end_task: Level: (1) ID = <10033> Status = 0 0 0 1 failed 2008-Jul-15 02:02:49 COMMAND CIMA-send_to_exec: Sending command to run standard on/off 2008-Jul-15 02:02:49 LOG4 exec_msg: From OBSERVER: onoff 1 300 60 hcorcal 10 each first 0 2008-Jul-15 02:02:49 LOG1 onoff_wapp: Calling 'onoff_wapp 1 300 60 hcorcal 10 each first 0' 2008-Jul-15 02:02:49 BEGIN begin_task: Starting task 'standard on/off' 2008-Jul-15 02:02:49 LOG5 begin_task: Level: (1) ID = <10037> Status = 0 0 0 0 ok 2008-Jul-15 02:02:49 INFO4 begin_task: MAKING 'standard on/off' using 'alfa' + 'WAPP' on 'J223354+243117' 2008-Jul-15 02:02:49 INFO1 onoff_wapp: Starting pattern: Standard on/off 2008-Jul-15 02:02:50 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Standard on/off} TOTALLOOPS 1 INFO {Starting standard on/off observation ...} 2008-Jul-15 02:02:50 START begin_task: Starting task 'waiting on telescope' 2008-Jul-15 02:02:50 LOG5 begin_task: Level: (2) ID = <10038> Status = 0 0 0 0 ok 2008-Jul-15 02:02:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Jul-15 02:02:50 LOG3 waittrk: Start waittrk 5 2008-Jul-15 02:02:50 START begin_task: Starting task 'waiting on telescope movement' 2008-Jul-15 02:02:50 LOG5 begin_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2008-Jul-15 02:02:55 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Jul-15 02:02:55 LOG5 end_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2008-Jul-15 02:02:55 START begin_task: Starting task 'waiting on telescope on source' 2008-Jul-15 02:02:55 LOG5 begin_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2008-Jul-15 02:02:55 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.69) to the zenith angle limit 19.69 degrees! 2008-Jul-15 02:02:55 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 608.3497 19.6900 RA/Dec = 22:33:55 +24:31:17 2008-Jul-15 02:03:25 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.69) to the zenith angle limit 19.69 degrees! 2008-Jul-15 02:03:25 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 608.2743 19.6900 RA/Dec = 22:33:55 +24:31:17 2008-Jul-15 02:03:55 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.69) to the zenith angle limit 19.69 degrees! 2008-Jul-15 02:03:55 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 608.1975 19.6899 RA/Dec = 22:33:55 +24:31:17 2008-Jul-15 02:04:25 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.69) to the zenith angle limit 19.69 degrees! 2008-Jul-15 02:04:25 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 608.1196 19.6900 RA/Dec = 22:33:55 +24:31:17 2008-Jul-15 02:04:55 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.69) to the zenith angle limit 19.69 degrees! 2008-Jul-15 02:04:55 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 608.0405 19.6900 RA/Dec = 22:33:55 +24:31:17 2008-Jul-15 02:05:25 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.69) to the zenith angle limit 19.69 degrees! 2008-Jul-15 02:05:25 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 607.9603 19.6900 RA/Dec = 22:33:55 +24:31:17 2008-Jul-15 02:05:55 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.69) to the zenith angle limit 19.69 degrees! 2008-Jul-15 02:05:55 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 607.8787 19.6900 RA/Dec = 22:33:55 +24:31:17 2008-Jul-15 02:06:25 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.69) to the zenith angle limit 19.69 degrees! 2008-Jul-15 02:06:25 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 607.7960 19.6900 RA/Dec = 22:33:55 +24:31:17 2008-Jul-15 02:06:55 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.69) to the zenith angle limit 19.69 degrees! 2008-Jul-15 02:06:55 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 607.7122 19.6900 RA/Dec = 22:33:55 +24:31:17 2008-Jul-15 02:07:15 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Jul-15 02:07:15 LOG5 end_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2008-Jul-15 02:07:15 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Jul-15 02:07:15 INFO2 waittrk: Now tracking J223354+243117 2008-Jul-15 02:07:15 LOG4 waittrk: Current telescope position: Az = 607.66 ZA = 19.68 2008-Jul-15 02:07:15 STOP finish_task: Finishing task 'waiting on telescope' 2008-Jul-15 02:07:15 LOG5 finish_task: Level: (2) ID = <10038> Status = 0 0 0 0 ok 2008-Jul-15 02:07:15 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Jul-15 02:07:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-15 02:07:15 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Jul-15 02:07:15 LOG5 end_task: Level: (2) ID = <10038> Status = 0 0 0 0 ok 2008-Jul-15 02:07:15 START begin_task: Starting task 'selecting calibration type' 2008-Jul-15 02:07:15 LOG5 begin_task: Level: (2) ID = <10041> Status = 0 0 0 0 ok 2008-Jul-15 02:07:15 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Jul-15 02:07:15 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Jul-15 02:07:15 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jul-15 02:07:15 START begin_task: Starting task 'waiting on setcal' 2008-Jul-15 02:07:15 LOG5 begin_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2008-Jul-15 02:07:16 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Jul-15 02:07:16 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jul-15 02:07:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-15 02:07:17 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jul-15 02:07:17 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Jul-15 02:07:17 LOG5 end_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2008-Jul-15 02:07:17 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Jul-15 02:07:17 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jul-15 02:07:17 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Jul-15 02:07:17 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jul-15 02:07:17 LOG5 begin_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2008-Jul-15 02:07:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-15 02:07:17 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jul-15 02:07:17 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jul-15 02:07:17 LOG5 end_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2008-Jul-15 02:07:17 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jul-15 02:07:17 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Jul-15 02:07:17 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jul-15 02:07:17 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Jul-15 02:07:17 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jul-15 02:07:17 LOG5 begin_task: Level: (3) ID = <10044> Status = 0 0 0 0 ok 2008-Jul-15 02:07:17 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jul-15 02:07:17 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jul-15 02:07:17 LOG5 end_task: Level: (3) ID = <10044> Status = 0 0 0 0 ok 2008-Jul-15 02:07:17 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jul-15 02:07:17 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Jul-15 02:07:17 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Jul-15 02:07:17 LOG5 end_task: Level: (2) ID = <10041> Status = 0 0 0 0 ok 2008-Jul-15 02:07:17 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 RM 2008-Jul-15 02:07:17 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 RM 2008-Jul-15 02:07:17 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 RM 2008-Jul-15 02:07:18 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 RM 2008-Jul-15 02:07:18 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20080715.a2048.0000.fits' is empty! 2008-Jul-15 02:07:18 INFO2 onoff_wapp: Starting standard on/off loop 1 of 1 2008-Jul-15 02:07:18 LOG4 send_obs_status: To obs_status: <1> LOOP 1 TOTALPARTS 2 PART 1 INFO {Making ON observation followed by OFF} 2008-Jul-15 02:07:18 START begin_task: Starting task 'clearing telescope offsets' 2008-Jul-15 02:07:18 LOG5 begin_task: Level: (2) ID = <10045> Status = 0 0 0 0 ok 2008-Jul-15 02:07:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Clearing Telescope Offsets} INFO {Removing telescope offsets ...} 2008-Jul-15 02:07:18 INFO3 clear_offsets: Removing telescope offsets 2008-Jul-15 02:07:18 LOG3 vw_send: To DATATAKING: hdrldsrcnm "J223354+243117" 2008-Jul-15 02:07:18 LOG3 vw_send: To DATATAKING: pnt tr 223354.800000 243117.000000 -CJ 2008-Jul-15 02:07:18 STOP finish_task: Finishing task 'clearing telescope offsets' 2008-Jul-15 02:07:18 LOG5 finish_task: Level: (2) ID = <10045> Status = 0 0 0 0 ok 2008-Jul-15 02:07:18 INFO2 finish_task: DONE finished clearing: telescope offsets 2008-Jul-15 02:07:18 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-15 02:07:18 STOP end_task: Finishing task 'clearing telescope offsets' with status 'OK' 2008-Jul-15 02:07:18 LOG5 end_task: Level: (2) ID = <10045> Status = 0 0 0 0 ok 2008-Jul-15 02:07:18 START begin_task: Starting task 'waiting on telescope' 2008-Jul-15 02:07:18 LOG5 begin_task: Level: (2) ID = <10046> Status = 0 0 0 0 ok 2008-Jul-15 02:07:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Jul-15 02:07:18 LOG3 waittrk: Start waittrk 5 2008-Jul-15 02:07:18 START begin_task: Starting task 'waiting on telescope movement' 2008-Jul-15 02:07:18 LOG5 begin_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2008-Jul-15 02:07:18 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "J223354+243117" 2008-Jul-15 02:07:18 LOG4 got_cormsg: From DATATAKING: pnt tr 223354.800000 243117.000000 -CJ 2008-Jul-15 02:07:18 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Jul-15 02:07:18 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 RM' 2008-Jul-15 02:07:23 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Jul-15 02:07:23 LOG5 end_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2008-Jul-15 02:07:23 START begin_task: Starting task 'waiting on telescope on source' 2008-Jul-15 02:07:23 LOG5 begin_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2008-Jul-15 02:07:25 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.64) to the zenith angle limit 19.69 degrees! 2008-Jul-15 02:07:25 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 607.6268 19.6384 RA/Dec = 22:33:55 +24:31:17 2008-Jul-15 02:07:25 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Jul-15 02:07:25 LOG5 end_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2008-Jul-15 02:07:25 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Jul-15 02:07:25 INFO2 waittrk: Now tracking J223354+243117 2008-Jul-15 02:07:25 LOG4 waittrk: Current telescope position: Az = 607.63 ZA = 19.64 2008-Jul-15 02:07:25 STOP finish_task: Finishing task 'waiting on telescope' 2008-Jul-15 02:07:25 LOG5 finish_task: Level: (2) ID = <10046> Status = 0 0 0 0 ok 2008-Jul-15 02:07:25 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Jul-15 02:07:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-15 02:07:25 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Jul-15 02:07:25 LOG5 end_task: Level: (2) ID = <10046> Status = 0 0 0 0 ok 2008-Jul-15 02:07:25 LOG5 antvel: Calling 'antvel 223354.800000 243117.000000 J 0' 2008-Jul-15 02:07:25 LOG2 antvel: Precessing RA = 22:33:54.8 Dec = +24:31:17.0 Epoch = 2008.53960 J 2008-Jul-15 02:07:25 LOG2 antvel: Computed apparent RA = 22:34:20.7 Dec = +24:33:55.4 2008-Jul-15 02:07:25 LOG2 antvel: Parameters to Doppler: Topocentric 22045 2008 197 0.0 2008-Jul-15 02:07:25 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Jul-15 02:07:25 LOG3 dopset_gen: Parameters for 'rest2sky': vel=10011.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Jul-15 02:07:25 INFO4 dopset_gen: New sky frequencies: 1374.506710 1374.506710 1374.506710 1374.506710 1374.506710 1374.506710 1374.506710 1374.506710 1374.506710 2008-Jul-15 02:07:25 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1374.506710 sky0=1374.506710 sky1=1374.506710 sky2=1374.506710 sky3=1374.506710 sky4=1374.506710 sky5=1374.506710 sky6=1374.506710 sky7=1374.506710 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jul-15 02:07:25 LOG2 dopset_gen: Result from 'sky2syn': 1624.506710 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jul-15 02:07:25 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1624506710.0} 2008-Jul-15 02:07:25 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-15 02:07:25 START begin_task: Starting task 'adjusting WAPP power' 2008-Jul-15 02:07:25 LOG5 begin_task: Level: (2) ID = <10049> Status = 0 0 0 0 ok 2008-Jul-15 02:07:25 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Jul-15 02:07:25 INFO2 adjust_power: Starting to adjust WAPP power 2008-Jul-15 02:07:25 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Jul-15 02:07:25 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Jul-15 02:07:25 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jul-15 02:07:25 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Jul-15 02:07:25 LOG5 begin_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2008-Jul-15 02:07:25 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1624506710.0} 2008-Jul-15 02:07:25 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-15 02:07:25 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Jul-15 02:07:25 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jul-15 02:07:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-15 02:07:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-15 02:07:28 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-15 02:07:28 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jul-15 02:07:28 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Jul-15 02:07:28 LOG5 end_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2008-Jul-15 02:07:28 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Jul-15 02:07:28 START begin_task: Starting task 'adjusting WAPP power' 2008-Jul-15 02:07:28 LOG5 begin_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2008-Jul-15 02:07:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Jul-15 02:07:28 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Jul-15 02:07:28 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Jul-15 02:07:28 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Jul-15 02:07:28 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Jul-15 02:07:28 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Jul-15 02:07:28 LOG5 begin_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2008-Jul-15 02:07:29 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Jul-15 02:07:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-15 02:07:29 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 9 7 dB --- beam 1: 8 7 dB 2008-Jul-15 02:07:29 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 7 6 dB 2008-Jul-15 02:07:29 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 5 4 dB 2008-Jul-15 02:07:29 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 3 dB --- beam 7: 3 3 dB 2008-Jul-15 02:07:29 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Jul-15 02:07:29 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Jul-15 02:07:29 LOG5 end_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2008-Jul-15 02:07:29 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.933 0.932 ALFA beam 1: 0.908 0.951 2008-Jul-15 02:07:29 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.014 1.080 ALFA beam 3: 0.910 0.959 2008-Jul-15 02:07:29 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.018 1.037 ALFA beam 5: 0.981 1.046 2008-Jul-15 02:07:29 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.037 0.884 ALFA beam 7: 0.927 0.984 2008-Jul-15 02:07:29 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Jul-15 02:07:29 LOG5 finish_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2008-Jul-15 02:07:29 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Jul-15 02:07:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-15 02:07:29 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Jul-15 02:07:29 LOG5 end_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2008-Jul-15 02:07:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Jul-15 02:07:29 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Jul-15 02:07:29 LOG5 finish_task: Level: (2) ID = <10049> Status = 0 0 0 0 ok 2008-Jul-15 02:07:29 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Jul-15 02:07:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-15 02:07:29 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Jul-15 02:07:29 LOG5 end_task: Level: (2) ID = <10049> Status = 0 0 0 0 ok 2008-Jul-15 02:07:29 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_onoff_on MESSAGE {Taking ON scan ...} 2008-Jul-15 02:07:29 LOG4 take_data: Calling 'take_data 300 1 ONOFF ON -' 2008-Jul-15 02:07:29 START begin_task: Starting task 'WAPP spectral observation' 2008-Jul-15 02:07:29 LOG5 begin_task: Level: (2) ID = <10053> Status = 0 0 0 0 ok 2008-Jul-15 02:07:29 LOG5 log_alfabeam: Parameters: 22.565222222222221 24.52138888888889 21.238926 2008.5395989872486 64.692741 2008-Jul-15 02:07:29 LOG4 log_alfabeam: ALFABEAM 0 22.565222222222214 24.521388888888900 2008-Jul-15 02:07:29 LOG4 log_alfabeam: ALFABEAM 1 22.558041475110990 24.549423290574033 2008-Jul-15 02:07:29 LOG4 log_alfabeam: ALFABEAM 2 22.559099885302544 24.459469266117527 2008-Jul-15 02:07:29 LOG4 log_alfabeam: ALFABEAM 3 22.566265599185655 24.431007760356373 2008-Jul-15 02:07:29 LOG4 log_alfabeam: ALFABEAM 4 22.572398564288154 24.492811645199861 2008-Jul-15 02:07:29 LOG4 log_alfabeam: ALFABEAM 5 22.571338491154485 24.583591779538640 2008-Jul-15 02:07:29 LOG4 log_alfabeam: ALFABEAM 6 22.564147026367753 24.611741510870459 2008-Jul-15 02:07:29 INFO2 take_data: Starting WAPP scan: 819700001 2008-Jul-15 02:07:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 300 2008-Jul-15 02:07:30 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jul-15 02:07:30 LOG5 begin_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2008-Jul-15 02:07:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jul-15 02:07:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22051.00 2008-Jul-15 02:07:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1624.506710 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jul-15 02:07:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1374.506710 MHz Flip = 1 Band = 0 Mixer = 1700.000000 MHz 2008-Jul-15 02:07:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1374.506710 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Jul-15 02:07:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1374.506710 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Jul-15 02:07:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1374.506710 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Jul-15 02:07:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1374.506710 MHz Flip = 1 Band = 0 Mixer = 1700.000000 MHz 2008-Jul-15 02:07:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1374.506710 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Jul-15 02:07:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1374.506710 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Jul-15 02:07:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1374.506710 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Jul-15 02:07:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Jul-15 02:07:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Jul-15 02:07:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Jul-15 02:07:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Jul-15 02:07:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Jul-15 02:07:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Jul-15 02:07:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Jul-15 02:07:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Jul-15 02:07:55 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.53) to the zenith angle limit 19.69 degrees! 2008-Jul-15 02:07:55 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 607.5403 19.5278 RA/Dec = 22:33:55 +24:31:17 2008-Jul-15 02:07:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Jul-15 02:07:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Jul-15 02:07:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Jul-15 02:07:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Jul-15 02:07:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Jul-15 02:08:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 3 (99999966 != 99999964)! 2008-Jul-15 02:08:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Jul-15 02:08:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Jul-15 02:08:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Jul-15 02:08:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Jul-15 02:08:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Jul-15 02:08:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Jul-15 02:08:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Jul-15 02:08:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Jul-15 02:08:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Jul-15 02:08:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Jul-15 02:08:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Jul-15 02:08:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Jul-15 02:08:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 3 (99999966 != 99999964)! 2008-Jul-15 02:08:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Jul-15 02:08:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Jul-15 02:08:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Jul-15 02:08:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Jul-15 02:08:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Jul-15 02:08:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Jul-15 02:08:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Jul-15 02:08:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Jul-15 02:08:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Jul-15 02:08:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Jul-15 02:08:25 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.42) to the zenith angle limit 19.69 degrees! 2008-Jul-15 02:08:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Jul-15 02:08:25 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 607.4528 19.4173 RA/Dec = 22:33:55 +24:31:17 2008-Jul-15 02:08:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Jul-15 02:08:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Jul-15 02:08:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 5 (99999966 != 99999964)! 2008-Jul-15 02:08:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Jul-15 02:08:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Jul-15 02:08:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Jul-15 02:08:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Jul-15 02:08:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Jul-15 02:08:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Jul-15 02:08:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Jul-15 02:08:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Jul-15 02:08:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Jul-15 02:08:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Jul-15 02:08:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Jul-15 02:08:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Jul-15 02:08:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Jul-15 02:08:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 2 (99999966 != 99999964)! 2008-Jul-15 02:08:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 2 (99999966 != 99999964)! 2008-Jul-15 02:08:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Jul-15 02:08:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Jul-15 02:08:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Jul-15 02:08:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Jul-15 02:08:53 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 2 (99999966 != 99999964)! 2008-Jul-15 02:08:53 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Jul-15 02:08:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Jul-15 02:08:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Jul-15 02:08:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Jul-15 02:08:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Jul-15 02:08:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Jul-15 02:08:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Jul-15 02:08:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Jul-15 02:08:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Jul-15 02:08:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Jul-15 02:09:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Jul-15 02:09:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Jul-15 02:09:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Jul-15 02:09:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 2 (99999966 != 99999964)! 2008-Jul-15 02:09:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Jul-15 02:09:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Jul-15 02:09:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 99999964)! 2008-Jul-15 02:09:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 5 (99999966 != 99999964)! 2008-Jul-15 02:09:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Jul-15 02:09:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Jul-15 02:09:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Jul-15 02:09:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Jul-15 02:09:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Jul-15 02:09:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Jul-15 02:09:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Jul-15 02:09:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Jul-15 02:09:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Jul-15 02:09:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Jul-15 02:09:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Jul-15 02:09:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Jul-15 02:09:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Jul-15 02:09:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Jul-15 02:09:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 2 (99999966 != 99999964)! 2008-Jul-15 02:09:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Jul-15 02:09:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Jul-15 02:09:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Jul-15 02:09:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 7 (99999966 != 99999964)! 2008-Jul-15 02:09:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Jul-15 02:09:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Jul-15 02:09:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Jul-15 02:09:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Jul-15 02:09:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Jul-15 02:09:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Jul-15 02:09:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Jul-15 02:09:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Jul-15 02:09:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Jul-15 02:09:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 9 (99999966 != 99999964)! 2008-Jul-15 02:09:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Jul-15 02:09:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Jul-15 02:09:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Jul-15 02:09:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Jul-15 02:09:53 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Jul-15 02:09:53 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Jul-15 02:09:53 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Jul-15 02:09:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Jul-15 02:09:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Jul-15 02:09:55 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.09) to the zenith angle limit 19.69 degrees! 2008-Jul-15 02:09:55 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 607.1832 19.0861 RA/Dec = 22:33:55 +24:31:17 2008-Jul-15 02:09:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Jul-15 02:09:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Jul-15 02:10:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Jul-15 02:10:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Jul-15 02:10:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Jul-15 02:10:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Jul-15 02:10:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Jul-15 02:10:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Jul-15 02:10:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Jul-15 02:10:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Jul-15 02:10:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Jul-15 02:10:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Jul-15 02:10:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Jul-15 02:10:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Jul-15 02:10:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Jul-15 02:10:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Jul-15 02:10:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Jul-15 02:10:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Jul-15 02:10:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 10 (99999966 != 99999964)! 2008-Jul-15 02:10:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Jul-15 02:10:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Jul-15 02:10:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Jul-15 02:10:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Jul-15 02:10:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Jul-15 02:10:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Jul-15 02:10:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Jul-15 02:10:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Jul-15 02:10:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Jul-15 02:10:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Jul-15 02:10:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Jul-15 02:10:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Jul-15 02:10:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Jul-15 02:10:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Jul-15 02:10:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Jul-15 02:10:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 4 (99999966 != 99999964)! 2008-Jul-15 02:10:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Jul-15 02:10:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Jul-15 02:10:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Jul-15 02:10:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 10 (99999966 != 99999964)! 2008-Jul-15 02:10:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Jul-15 02:10:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Jul-15 02:10:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Jul-15 02:10:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Jul-15 02:10:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Jul-15 02:10:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Jul-15 02:10:53 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Jul-15 02:10:53 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Jul-15 02:10:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Jul-15 02:10:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Jul-15 02:10:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Jul-15 02:11:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Jul-15 02:11:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Jul-15 02:11:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 3 (99999966 != 99999964)! 2008-Jul-15 02:11:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 9 (99999966 != 99999964)! 2008-Jul-15 02:11:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Jul-15 02:11:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Jul-15 02:11:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Jul-15 02:11:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Jul-15 02:11:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Jul-15 02:11:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Jul-15 02:11:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Jul-15 02:11:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Jul-15 02:11:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Jul-15 02:11:16 WARNING WAPP=4-chip_c