2008-Jul-06 02:49:45 BEGIN executive: CIMA executive starting ... 2008-Jul-06 02:49:45 NOTE executive: STARTING NEW CIMA SESSION 2008-Jul-06 02:49:45 INFO1 executive: Using CIMA version 3.0.00 'next' from 2008-06-12 15:50 2008-Jul-06 02:49:45 INFO4 executive: This is an ON-LINE session 2008-Jul-06 02:49:45 INFO4 executive: This is a REMOTE session 2008-Jul-06 02:49:45 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2008-Jul-06 02:49:45 INFO1 executive: CIMA session for project 'a2048' in 'line' mode for 'RT' 2008-Jul-06 02:49:45 INFO2 executive: Logging to '/share/obs4/usr/a2048/a2048.cimalog_20080706' 2008-Jul-06 02:49:46 LOG2 log_preferences: Currently applied preferences: 2008-Jul-06 02:49:46 LOG2 log_preferences: prefs(dailylog) = daily 2008-Jul-06 02:49:46 LOG2 log_preferences: prefs(offlinelog) = skip 2008-Jul-06 02:49:46 LOG2 log_preferences: prefs(datawindow) = ignore 2008-Jul-06 02:49:46 LOG2 log_preferences: prefs(limitwarning) = enabled 2008-Jul-06 02:49:46 LOG2 log_preferences: prefs(wappfailure) = abort 2008-Jul-06 02:49:46 LOG2 log_preferences: prefs(helpstyle) = stay-open 2008-Jul-06 02:49:46 LOG2 log_preferences: prefs(logcolours) = full 2008-Jul-06 02:49:46 LOG2 log_preferences: prefs(displaylevel) = INFO3 2008-Jul-06 02:49:46 LOG2 log_preferences: prefs(loglevel) = LOG5 2008-Jul-06 02:49:46 LOG2 log_preferences: prefs(displayformat) = short 2008-Jul-06 02:49:46 LOG2 log_preferences: prefs(logformat) = new 2008-Jul-06 02:49:46 LOG2 log_preferences: prefs(fontsize) = 4 2008-Jul-06 02:49:46 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2008-Jul-06 02:49:46 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2048 2008-Jul-06 02:49:46 ALERT executive: CIMA executive ready 2008-Jul-06 02:49:49 LOG4 got_cormsg: From DATATAKING: Can't communicate with program corProg 2008-Jul-06 02:49:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-06 02:49:49 LOG4 got_cormsg: From DATATAKING: setup 2008-Jul-06 02:49:52 NOTE frontend: CIMA frontend ready 2008-Jul-06 02:49:55 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0xd 2008-Jul-06 02:49:55 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0xd' 2008-Jul-06 02:49:55 LOG4 got_cormsg: From DATATAKING: vw% io 2008-Jul-06 02:49:55 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2008-Jul-06 02:49:55 LOG4 got_cormsg: From DATATAKING: 2008-Jul-06 02:49:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-06 02:49:55 LOG4 got_cormsg: From DATATAKING: tape stat 2008-Jul-06 02:49:55 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2008-Jul-06 02:49:55 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2008-Jul-06 02:49:56 LOG4 got_cormsg: From DATATAKING: vw% connectall 2008-Jul-06 02:49:56 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2008-Jul-06 02:49:56 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2008-Jul-06 02:49:56 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2008-Jul-06 02:49:56 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2008-Jul-06 02:49:56 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2008-Jul-06 02:49:56 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2008-Jul-06 02:49:56 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2008-Jul-06 02:49:56 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2008-Jul-06 02:49:56 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2048 2008-Jul-06 02:49:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-06 02:49:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-06 02:50:46 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2008-Jul-06 02:50:46 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2008-Jul-06 02:50:46 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2008-Jul-06 02:50:46 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2008-Jul-06 02:50:46 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Jul-06 02:50:46 NOTE select_receiver: Starting to select receiver ALFA 2008-Jul-06 02:50:46 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Jul-06 02:50:46 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Jul-06 02:50:46 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Jul-06 02:50:46 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Jul-06 02:50:46 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Jul-06 02:50:46 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Jul-06 02:50:46 DONE finish_task: DONE finished selecting: receiver ALFA 2008-Jul-06 02:50:46 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Jul-06 02:50:46 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Jul-06 02:50:46 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Jul-06 02:50:47 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Jul-06 02:50:47 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Jul-06 02:50:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-06 02:50:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-06 02:55:20 COMMAND CIMA-send_to_exec: Sending command to stop observation 2008-Jul-06 02:55:20 LOG4 exec_msg: From OBSERVER: stop_task 2008-Jul-06 02:55:20 WARNING stop_task: WARNING stop at end of current loop/command requested! 2008-Jul-06 02:58:49 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 02:58:49.298 (seconds: 10729.298)!} 2008-Jul-06 02:58:49 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 02:58:49.298 (seconds: 10729.298)! 2008-Jul-06 03:00:10 ALERT CIMA-exit_cima: CIMA has been forced to exit! 2008-Jul-06 03:00:10 ALERT CIMA-exit_cima: Exiting CIMA ... 2008-Jul-06 03:00:10 COMMAND CIMA-send_to_exec: Sending command to move interim correlator data 2008-Jul-06 03:00:10 LOG4 exec_msg: From OBSERVER: vw_send {mvdata a2048} 2008-Jul-06 03:00:10 LOG3 vw_send: To DATATAKING: mvdata a2048 2008-Jul-06 03:00:10 COMMAND CIMA-send_to_exec: Sending command to clear telescope offsets 2008-Jul-06 03:00:10 LOG4 exec_msg: From OBSERVER: vw_send {pnt c setoff 0 0} 2008-Jul-06 03:00:10 LOG3 vw_send: To DATATAKING: pnt c setoff 0 0 2008-Jul-06 03:00:10 NOTE CIMA-exit_cima: Cleaning up session ... 2008-Jul-06 03:00:10 LOG4 got_cormsg: From DATATAKING: mvdata a2048 2008-Jul-06 03:00:10 LOG4 got_cormsg: From DATATAKING: pnt c setoff 0 0 2008-Jul-06 03:00:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-06 03:00:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-06 03:00:12 LOG3 exec_msg: Closing socket 2008-Jul-06 03:02:33 BEGIN executive: CIMA executive starting ... 2008-Jul-06 03:02:33 NOTE executive: STARTING NEW CIMA SESSION 2008-Jul-06 03:02:33 INFO1 executive: Using CIMA version 3.0.00 'next' from 2008-06-12 15:50 2008-Jul-06 03:02:33 INFO4 executive: This is an ON-LINE session 2008-Jul-06 03:02:33 INFO4 executive: This is a REMOTE session 2008-Jul-06 03:02:33 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2008-Jul-06 03:02:33 INFO1 executive: CIMA session for project 'a2048' in 'line' mode for 'RT' 2008-Jul-06 03:02:33 INFO2 executive: Logging to '/share/obs4/usr/a2048/a2048.cimalog_20080706' 2008-Jul-06 03:02:34 LOG2 log_preferences: Currently applied preferences: 2008-Jul-06 03:02:34 LOG2 log_preferences: prefs(dailylog) = daily 2008-Jul-06 03:02:34 LOG2 log_preferences: prefs(offlinelog) = skip 2008-Jul-06 03:02:34 LOG2 log_preferences: prefs(datawindow) = ignore 2008-Jul-06 03:02:34 LOG2 log_preferences: prefs(limitwarning) = enabled 2008-Jul-06 03:02:34 LOG2 log_preferences: prefs(wappfailure) = abort 2008-Jul-06 03:02:34 LOG2 log_preferences: prefs(helpstyle) = stay-open 2008-Jul-06 03:02:34 LOG2 log_preferences: prefs(logcolours) = full 2008-Jul-06 03:02:34 LOG2 log_preferences: prefs(displaylevel) = INFO3 2008-Jul-06 03:02:34 LOG2 log_preferences: prefs(loglevel) = LOG5 2008-Jul-06 03:02:34 LOG2 log_preferences: prefs(displayformat) = short 2008-Jul-06 03:02:34 LOG2 log_preferences: prefs(logformat) = new 2008-Jul-06 03:02:34 LOG2 log_preferences: prefs(fontsize) = 4 2008-Jul-06 03:02:34 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2008-Jul-06 03:02:34 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2048 2008-Jul-06 03:02:34 ALERT executive: CIMA executive ready 2008-Jul-06 03:02:36 NOTE frontend: CIMA frontend ready 2008-Jul-06 03:02:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-06 03:02:37 LOG4 got_cormsg: From DATATAKING: setup 2008-Jul-06 03:02:43 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0xd 2008-Jul-06 03:02:43 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0xd' 2008-Jul-06 03:02:43 LOG4 got_cormsg: From DATATAKING: vw% io 2008-Jul-06 03:02:43 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2008-Jul-06 03:02:43 LOG4 got_cormsg: From DATATAKING: 2008-Jul-06 03:02:43 LOG4 got_cormsg: From DATATAKING: vw% tape stat 2008-Jul-06 03:02:43 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2008-Jul-06 03:02:43 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2008-Jul-06 03:02:43 LOG4 got_cormsg: From DATATAKING: vw% connectall 2008-Jul-06 03:02:43 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2008-Jul-06 03:02:43 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2008-Jul-06 03:02:43 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2008-Jul-06 03:02:43 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2008-Jul-06 03:02:43 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2008-Jul-06 03:02:43 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2008-Jul-06 03:02:44 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2008-Jul-06 03:02:44 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2008-Jul-06 03:02:44 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2048 2008-Jul-06 03:02:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-06 03:02:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-06 03:03:13 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2008-Jul-06 03:03:13 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2008-Jul-06 03:03:13 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2008-Jul-06 03:03:13 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2008-Jul-06 03:03:14 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Jul-06 03:03:14 NOTE select_receiver: Starting to select receiver ALFA 2008-Jul-06 03:03:14 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Jul-06 03:03:14 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Jul-06 03:03:14 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Jul-06 03:03:14 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Jul-06 03:03:14 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Jul-06 03:03:14 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Jul-06 03:03:14 DONE finish_task: DONE finished selecting: receiver ALFA 2008-Jul-06 03:03:14 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Jul-06 03:03:14 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Jul-06 03:03:14 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Jul-06 03:03:14 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Jul-06 03:03:14 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Jul-06 03:03:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-06 03:03:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-06 03:04:08 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2008-Jul-06 03:04:08 LOG4 exec_msg: From OBSERVER: restart_wapp 2008-Jul-06 03:04:08 LOG5 restart_wapp: Calling 'restart_wapp' 2008-Jul-06 03:04:08 BEGIN begin_task: Starting task 'restarting the WAPPs' 2008-Jul-06 03:04:08 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Jul-06 03:04:08 NOTE restart_wapp: Restarting all WAPPs 2008-Jul-06 03:04:08 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2008-Jul-06 03:04:09 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2008-Jul-06 03:04:09 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Jul-06 03:04:09 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Jul-06 03:04:12 ALERT WAPP=2-wappcon: WAPP2 restarting 2008-Jul-06 03:04:12 ALERT WAPP=1-wappcon: WAPP1 restarting 2008-Jul-06 03:04:12 ALERT WAPP=3-wappcon: WAPP3 restarting 2008-Jul-06 03:04:12 ALERT WAPP=4-wappcon: WAPP4 restarting 2008-Jul-06 03:04:30 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2008-Jul-06 03:04:30 LOG4 exec_msg: From OBSERVER: restart_wapp 2008-Jul-06 03:04:30 LOG5 restart_wapp: Calling 'restart_wapp' 2008-Jul-06 03:04:30 BEGIN begin_task: Starting task 'restarting the WAPPs' 2008-Jul-06 03:04:30 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Jul-06 03:04:30 NOTE restart_wapp: Restarting all WAPPs 2008-Jul-06 03:04:30 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2008-Jul-06 03:04:30 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2008-Jul-06 03:04:30 LOG5 end_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Jul-06 03:04:30 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Jul-06 03:04:30 LOG3 exec_msg: Closing socket 2008-Jul-06 03:04:30 LOG3 exec_msg: Closing socket 2008-Jul-06 03:04:30 LOG3 exec_msg: Closing socket 2008-Jul-06 03:04:30 LOG3 exec_msg: Closing socket 2008-Jul-06 03:04:33 ALERT WAPP=2-wappcon: WAPP2 restarting 2008-Jul-06 03:04:33 ALERT WAPP=1-wappcon: WAPP1 restarting 2008-Jul-06 03:04:33 ALERT WAPP=3-wappcon: WAPP3 restarting 2008-Jul-06 03:04:33 ALERT WAPP=4-wappcon: WAPP4 restarting 2008-Jul-06 03:07:55 INFO1 CIMA-run_command_file: Transferring command file '080706.cmd ' to executive ... 2008-Jul-06 03:07:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 3 {LOAD ages_config.conf} 2008-Jul-06 03:07:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 4 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5} 2008-Jul-06 03:07:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 5 {CATALOG AGESFull.cat} 2008-Jul-06 03:07:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {IF LSTSLEW(AGES7448_p1_061) < 215126 THEN} 2008-Jul-06 03:07:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {FIXEDDRIFT az=275.13 alfaangle=-82.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p1_061 ra=225000.00 dec=162900.00} 2008-Jul-06 03:07:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 12 {ENDIF} 2008-Jul-06 03:07:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 15 {IF LSTSLEW(AGES7448_p1_063) < 221426 THEN} 2008-Jul-06 03:07:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 16 {FIXEDDRIFT az=280.95 alfaangle=-86.7 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p1_063 ra=225000.00 dec=162600.00} 2008-Jul-06 03:07:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 19 {ENDIF} 2008-Jul-06 03:07:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 22 {IF LSTSLEW(AGES7448_p1_065) < 223726 THEN} 2008-Jul-06 03:07:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 23 {FIXEDDRIFT az=301.34 alfaangle=72.7 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p1_065 ra=225000.00 dec=162300.00} 2008-Jul-06 03:07:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 26 {ENDIF} 2008-Jul-06 03:07:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 29 {IF LSTSLEW(AGES7448_p1_067) < 230326 THEN} 2008-Jul-06 03:07:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 14 30 {FIXEDDRIFT az=58.00 alfaangle=-33.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p1_067 ra=225000.00 dec=162000.00} 2008-Jul-06 03:07:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 15 33 {ENDIF} 2008-Jul-06 03:07:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 16 36 {IF LSTSLEW(AGES7448_p1_069) < 232626 THEN} 2008-Jul-06 03:07:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 17 37 {FIXEDDRIFT az=78.10 alfaangle=-54.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p1_069 ra=225000.00 dec=161700.00} 2008-Jul-06 03:07:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 18 40 {ENDIF} 2008-Jul-06 03:07:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 19 43 {IF LSTSLEW(AGES7448_p1_071) < 234926 THEN} 2008-Jul-06 03:07:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 20 44 {FIXEDDRIFT az=83.87 alfaangle=-58.7 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p1_071 ra=225000.00 dec=161400.00} 2008-Jul-06 03:07:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 21 47 {ENDIF} 2008-Jul-06 03:07:55 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-Jul-06 03:07:55 LOG4 exec_msg: From OBSERVER: run_command_file 080706.cmd 1 1 21 2008-Jul-06 03:07:55 LOG4 run_command_file: Calling 'run_command_file 080706.cmd 1 1 21' 2008-Jul-06 03:07:55 BEGIN begin_task: Starting task 'running command file '080706.cmd'' 2008-Jul-06 03:07:55 LOG5 begin_task: Level: (1) ID = <10004> Status = 0 0 0 0 ok 2008-Jul-06 03:07:55 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '080706.cmd' ...} 2008-Jul-06 03:07:55 NOTE run_command_file: Starting execution of command file '080706.cmd' from line 1 2008-Jul-06 03:07:56 COMMAND run_command_line: EXECUTING command 3: 'LOAD ages_config.conf' 2008-Jul-06 03:07:56 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2008-Jul-06 03:07:56 NOTE CIMA-check_config_file: File 'ages_config.conf' contains an ALFA set-up which will be ignored! 2008-Jul-06 03:07:56 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Jul-06 03:07:56 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2008-Jul-06 03:07:56 NOTE CIMA-load_config_file: Loading configuration file 'ages_config.conf' 2008-Jul-06 03:07:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Jul-06 03:07:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Jul-06 03:07:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Jul-06 03:07:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Jul-06 03:07:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Jul-06 03:07:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2008-Jul-06 03:07:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Jul-06 03:07:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786" 2008-Jul-06 03:07:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786" 2008-Jul-06 03:07:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786" 2008-Jul-06 03:07:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786" 2008-Jul-06 03:07:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786" 2008-Jul-06 03:07:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786" 2008-Jul-06 03:07:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786" 2008-Jul-06 03:07:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786" 2008-Jul-06 03:07:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786" 2008-Jul-06 03:07:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Jul-06 03:07:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Jul-06 03:07:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Jul-06 03:07:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Jul-06 03:07:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Jul-06 03:07:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Jul-06 03:07:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Jul-06 03:07:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Jul-06 03:07:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Jul-06 03:07:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Jul-06 03:07:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Jul-06 03:07:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Jul-06 03:07:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Jul-06 03:07:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2008-Jul-06 03:07:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Jul-06 03:07:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Jul-06 03:07:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Jul-06 03:07:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Jul-06 03:07:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Jul-06 03:07:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Jul-06 03:07:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Jul-06 03:07:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Jul-06 03:07:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Jul-06 03:07:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1670.405752" 2008-Jul-06 03:07:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Jul-06 03:07:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Jul-06 03:07:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Jul-06 03:07:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Jul-06 03:07:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Jul-06 03:07:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Jul-06 03:07:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Jul-06 03:07:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Jul-06 03:07:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Jul-06 03:07:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Jul-06 03:07:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Jul-06 03:07:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Jul-06 03:07:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Jul-06 03:07:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Jul-06 03:07:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Jul-06 03:07:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Jul-06 03:07:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Jul-06 03:07:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Jul-06 03:07:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Jul-06 03:07:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Jul-06 03:07:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Jul-06 03:07:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Jul-06 03:07:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Jul-06 03:07:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Jul-06 03:07:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Jul-06 03:07:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Jul-06 03:07:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Jul-06 03:07:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Jul-06 03:07:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Jul-06 03:07:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Jul-06 03:07:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Jul-06 03:07:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Jul-06 03:07:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Jul-06 03:07:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Jul-06 03:07:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Jul-06 03:07:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Jul-06 03:07:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Jul-06 03:07:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Jul-06 03:07:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Jul-06 03:07:58 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Jul-06 03:07:58 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Jul-06 03:07:58 LOG5 begin_task: Level: (2) ID = <10005> Status = 0 0 0 0 ok 2008-Jul-06 03:07:58 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Jul-06 03:07:58 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Jul-06 03:07:58 INFO1 config_iflo: Selecting receiver ALFA 2008-Jul-06 03:07:58 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2008-Jul-06 03:07:58 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2008-Jul-06 03:07:58 START begin_task: Starting task 'selecting receiver ALFA' 2008-Jul-06 03:07:58 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2008-Jul-06 03:07:58 NOTE select_receiver: Starting to select receiver ALFA 2008-Jul-06 03:07:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Jul-06 03:07:58 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Jul-06 03:07:58 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Jul-06 03:07:58 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Jul-06 03:07:58 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Jul-06 03:07:58 LOG5 finish_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2008-Jul-06 03:07:58 INFO2 finish_task: DONE finished selecting: receiver ALFA 2008-Jul-06 03:07:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-06 03:07:58 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Jul-06 03:07:58 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2008-Jul-06 03:07:58 START begin_task: Starting task 'waiting for receiver ALFA' 2008-Jul-06 03:07:58 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2008-Jul-06 03:07:58 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2008-Jul-06 03:07:58 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2008-Jul-06 03:07:58 INFO1 config_iflo: Configuring rest of the IF/LO path 2008-Jul-06 03:07:58 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2008-Jul-06 03:07:58 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jul-06 03:07:58 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Jul-06 03:07:58 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jul-06 03:07:58 LOG5 begin_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2008-Jul-06 03:07:58 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jul-06 03:07:58 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jul-06 03:07:58 LOG5 end_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2008-Jul-06 03:07:58 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jul-06 03:07:58 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Jul-06 03:07:58 LOG3 vw_send: To DATATAKING: alfafb 1 2008-Jul-06 03:07:58 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2008-Jul-06 03:07:58 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Jul-06 03:07:58 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Jul-06 03:07:58 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2008-Jul-06 03:07:58 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2008-Jul-06 03:07:58 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2008-Jul-06 03:07:58 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1670405752.0} 2008-Jul-06 03:07:58 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2008-Jul-06 03:07:58 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2008-Jul-06 03:07:58 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Jul-06 03:07:58 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Jul-06 03:07:58 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Jul-06 03:07:58 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Jul-06 03:07:58 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Jul-06 03:07:58 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2008-Jul-06 03:07:58 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2008-Jul-06 03:07:58 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2008-Jul-06 03:07:58 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2008-Jul-06 03:07:58 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Jul-06 03:07:58 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2008-Jul-06 03:07:59 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Jul-06 03:07:59 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Jul-06 03:07:59 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-06 03:07:59 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Jul-06 03:07:59 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2008-Jul-06 03:07:59 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Jul-06 03:07:59 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2008-Jul-06 03:07:59 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2008-Jul-06 03:07:59 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Jul-06 03:07:59 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jul-06 03:07:59 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Jul-06 03:07:59 LOG5 begin_task: Level: (3) ID = <10009> Status = 0 0 0 0 ok 2008-Jul-06 03:07:59 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Jul-06 03:07:59 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Jul-06 03:07:59 LOG4 got_cormsg: From DATATAKING: alfafb 1 2008-Jul-06 03:07:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2008-Jul-06 03:07:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2008-Jul-06 03:07:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2008-Jul-06 03:07:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2008-Jul-06 03:07:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1670405752.0} 2008-Jul-06 03:07:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2008-Jul-06 03:07:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2008-Jul-06 03:07:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2008-Jul-06 03:07:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2008-Jul-06 03:07:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2008-Jul-06 03:07:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2008-Jul-06 03:07:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Jul-06 03:07:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2008-Jul-06 03:07:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Jul-06 03:07:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-06 03:07:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Jul-06 03:07:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2008-Jul-06 03:07:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2008-Jul-06 03:07:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2008-Jul-06 03:07:59 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jul-06 03:08:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-06 03:08:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-06 03:08:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-06 03:08:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-06 03:08:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-06 03:08:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-06 03:08:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-06 03:08:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-06 03:08:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-06 03:08:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-06 03:08:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-06 03:08:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-06 03:08:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-06 03:08:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-06 03:08:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-06 03:08:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-06 03:08:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-06 03:08:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-06 03:08:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-06 03:08:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-06 03:08:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-06 03:08:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-06 03:08:14 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jul-06 03:08:14 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Jul-06 03:08:14 LOG5 end_task: Level: (3) ID = <10009> Status = 0 0 0 0 ok 2008-Jul-06 03:08:14 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Jul-06 03:08:14 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Jul-06 03:08:14 LOG5 finish_task: Level: (2) ID = <10005> Status = 0 0 0 0 ok 2008-Jul-06 03:08:14 DONE finish_task: DONE finished configuration: IF/LO path 2008-Jul-06 03:08:14 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Jul-06 03:08:14 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Jul-06 03:08:14 LOG5 end_task: Level: (2) ID = <10005> Status = 0 0 0 0 ok 2008-Jul-06 03:08:14 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Jul-06 03:08:14 LOG5 begin_task: Level: (2) ID = <10010> Status = 0 0 0 0 ok 2008-Jul-06 03:08:14 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Jul-06 03:08:14 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Jul-06 03:08:14 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2008-Jul-06 03:08:14 START begin_task: Starting task 'selecting calibration port' 2008-Jul-06 03:08:14 LOG5 begin_task: Level: (3) ID = <10011> Status = 0 0 0 0 ok 2008-Jul-06 03:08:14 LOG3 vw_send: To DATATAKING: calport 3 2008-Jul-06 03:08:14 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Jul-06 03:08:14 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jul-06 03:08:14 START begin_task: Starting task 'waiting on calport' 2008-Jul-06 03:08:14 LOG5 begin_task: Level: (4) ID = <10012> Status = 0 0 0 0 ok 2008-Jul-06 03:08:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-06 03:08:15 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Jul-06 03:08:15 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jul-06 03:08:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-06 03:08:15 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jul-06 03:08:15 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Jul-06 03:08:15 LOG5 end_task: Level: (4) ID = <10012> Status = 0 0 0 0 ok 2008-Jul-06 03:08:15 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Jul-06 03:08:15 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Jul-06 03:08:15 LOG5 end_task: Level: (3) ID = <10011> Status = 0 0 0 0 ok 2008-Jul-06 03:08:15 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Jul-06 03:08:15 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Jul-06 03:08:15 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jul-06 03:08:15 LOG5 begin_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2008-Jul-06 03:08:15 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jul-06 03:08:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-06 03:08:15 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jul-06 03:08:15 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jul-06 03:08:15 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jul-06 03:08:15 LOG5 end_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2008-Jul-06 03:08:15 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Jul-06 03:08:15 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Jul-06 03:08:15 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Jul-06 03:08:15 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Jul-06 03:08:15 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Jul-06 03:08:15 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Jul-06 03:08:15 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Jul-06 03:08:15 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Jul-06 03:08:15 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 RT 2008-Jul-06 03:08:15 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 RT 2008-Jul-06 03:08:15 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 RT 2008-Jul-06 03:08:15 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 RT 2008-Jul-06 03:08:15 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Jul-06 03:08:15 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Jul-06 03:08:15 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jul-06 03:08:15 LOG5 begin_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2008-Jul-06 03:08:15 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jul-06 03:08:15 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jul-06 03:08:15 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jul-06 03:08:15 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jul-06 03:08:15 LOG5 end_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2008-Jul-06 03:08:15 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 RT 2008-Jul-06 03:08:15 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 RT 2008-Jul-06 03:08:15 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 RT 2008-Jul-06 03:08:15 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 RT 2008-Jul-06 03:08:16 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Jul-06 03:08:16 LOG5 finish_task: Level: (2) ID = <10010> Status = 0 0 0 0 ok 2008-Jul-06 03:08:16 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Jul-06 03:08:16 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Jul-06 03:08:16 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Jul-06 03:08:16 LOG5 end_task: Level: (2) ID = <10010> Status = 0 0 0 0 ok 2008-Jul-06 03:08:16 COMMAND run_command_line: EXECUTING command 4: 'SETUP FIXEDDRIFT calwhen=tracking calsecs=5' 2008-Jul-06 03:08:16 COMMAND run_command_line: EXECUTING command 5: 'CATALOG AGESFull.cat' 2008-Jul-06 03:08:16 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2008-Jul-06 03:08:16 COMMAND run_command_line: EXECUTING command 8: 'IF LSTSLEW(AGES7448_p1_061) < 215126 THEN' 2008-Jul-06 03:08:17 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES7448_p1_061) < 215126 2008-Jul-06 03:08:17 INFO5 is_if_valid: Condition parsed as: 21.784756666666667 < 21.857222222222223 2008-Jul-06 03:08:17 COMMAND run_command_line: EXECUTING command 9: 'FIXEDDRIFT az=275.13 alfaangle=-82.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p1_061 ra=225000.00 dec=162900.00' 2008-Jul-06 03:08:17 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Jul-06 03:08:17 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 RT' 2008-Jul-06 03:08:17 NOTE WAPPDATA-new_file: New FITS file: wapp.20080706.a2048.0000.fits 2008-Jul-06 03:08:17 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Jul-06 03:08:17 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Jul-06 03:08:17 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20080706.a2048.0000.fits} 2008-Jul-06 03:08:17 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 RT' 2008-Jul-06 03:08:54 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Jul-06 03:08:54 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 275.13 -82.0 hcorcal 5 tracking no first 1 AGES7448_p1_061 225000.00 162900.00 J 8500.0 Heliocentric velocity(optical)' 2008-Jul-06 03:08:54 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Jul-06 03:08:54 LOG5 begin_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2008-Jul-06 03:08:54 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'igalfa_zw_08_05' 2008-Jul-06 03:08:54 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Jul-06 03:08:54 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES7448_p1_061} 2008-Jul-06 03:08:54 INFO3 fixed_driftmap: Sending telescope to Az = 275.13 and ZA = 14.18 2008-Jul-06 03:08:54 LOG3 track_source: Calling 'track_source AGES7448_p1_061 275.13 14.1828780957 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Jul-06 03:08:54 START begin_task: Starting task 'sending tracking commands' 2008-Jul-06 03:08:54 LOG5 begin_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2008-Jul-06 03:08:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7448_p1_061} INFO {Slewing to source 'AGES7448_p1_061' ...} 2008-Jul-06 03:08:54 INFO1 track_source: Starting to track AGES7448_p1_061 2008-Jul-06 03:08:54 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7448_p1_061" 2008-Jul-06 03:08:54 LOG3 vw_send: To DATATAKING: set ra 275.13 2008-Jul-06 03:08:54 LOG3 vw_send: To DATATAKING: set dec 14.1828780957 2008-Jul-06 03:08:54 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Jul-06 03:08:55 LOG3 vw_send: To DATATAKING: pnt tr 275.13 14.1828780957 -CF 2008-Jul-06 03:08:55 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Jul-06 03:08:55 STOP finish_task: Finishing task 'sending tracking commands' 2008-Jul-06 03:08:55 LOG5 finish_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2008-Jul-06 03:08:55 INFO2 finish_task: DONE finished sending: tracking commands 2008-Jul-06 03:08:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-06 03:08:55 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Jul-06 03:08:55 LOG5 end_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2008-Jul-06 03:08:55 START begin_task: Starting task 'rotate ALFA to -82 degrees' 2008-Jul-06 03:08:55 LOG5 begin_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2008-Jul-06 03:08:55 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -82 degrees ...} 2008-Jul-06 03:08:55 INFO2 rotate_alfa: ALFA commanded to -82.0 degrees 2008-Jul-06 03:08:55 LOG3 sock_errsend: To ALFAMOTOR: POSITION -82.0 REPLY 2008-Jul-06 03:08:55 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Jul-06 03:08:55 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Jul-06 03:08:55 LOG5 begin_task: Level: (4) ID = <10018> Status = 0 0 0 0 ok 2008-Jul-06 03:08:55 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7448_p1_061" 2008-Jul-06 03:08:55 LOG4 got_cormsg: From DATATAKING: set ra 275.13 2008-Jul-06 03:08:55 LOG4 got_cormsg: From DATATAKING: set dec 14.1828780957 2008-Jul-06 03:08:55 LOG4 got_cormsg: From DATATAKING: vw% 275.13 2008-Jul-06 03:08:55 LOG4 got_cormsg: From DATATAKING: vw% 14.1828780957 2008-Jul-06 03:08:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-06 03:08:55 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Jul-06 03:08:55 LOG4 got_cormsg: From DATATAKING: pnt tr 275.13 14.1828780957 -CF 2008-Jul-06 03:08:55 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Jul-06 03:08:55 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Jul-06 03:08:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-06 03:09:11 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Jul-06 03:09:11 INFO3 alfa_motor: ALFA rotator in-position -82.00 degrees 2008-Jul-06 03:09:11 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Jul-06 03:09:11 LOG5 end_task: Level: (4) ID = <10018> Status = 0 0 0 0 ok 2008-Jul-06 03:09:11 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Jul-06 03:09:11 STOP finish_task: Finishing task 'rotate ALFA to -82 degrees' 2008-Jul-06 03:09:11 LOG5 finish_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2008-Jul-06 03:09:11 INFO2 finish_task: DONE finished configuration: rotating ALFA to -82 degrees 2008-Jul-06 03:09:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-06 03:09:11 STOP end_task: Finishing task 'rotate ALFA to -82 degrees' with status 'OK' 2008-Jul-06 03:09:11 LOG5 end_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2008-Jul-06 03:09:11 START begin_task: Starting task 'waiting on telescope' 2008-Jul-06 03:09:11 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2008-Jul-06 03:09:12 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Jul-06 03:09:12 LOG3 waittrk: Start waittrk 5 2008-Jul-06 03:09:12 START begin_task: Starting task 'waiting on telescope movement' 2008-Jul-06 03:09:12 LOG5 begin_task: Level: (4) ID = <10020> Status = 0 0 0 0 ok 2008-Jul-06 03:09:17 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Jul-06 03:09:17 LOG5 end_task: Level: (4) ID = <10020> Status = 0 0 0 0 ok 2008-Jul-06 03:09:17 START begin_task: Starting task 'waiting on telescope on source' 2008-Jul-06 03:09:17 LOG5 begin_task: Level: (4) ID = <10021> Status = 0 0 0 0 ok 2008-Jul-06 03:16:08 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Jul-06 03:16:08 LOG5 end_task: Level: (4) ID = <10021> Status = 0 0 0 0 ok 2008-Jul-06 03:16:08 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Jul-06 03:16:08 INFO2 waittrk: Now tracking AGES7448_p1_061 2008-Jul-06 03:16:08 LOG4 waittrk: Current telescope position: Az = 274.71 ZA = 14.19 2008-Jul-06 03:16:08 STOP finish_task: Finishing task 'waiting on telescope' 2008-Jul-06 03:16:08 LOG5 finish_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2008-Jul-06 03:16:08 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Jul-06 03:16:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-06 03:16:08 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Jul-06 03:16:08 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2008-Jul-06 03:16:08 START begin_task: Starting task 'selecting calibration type' 2008-Jul-06 03:16:08 LOG5 begin_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2008-Jul-06 03:16:08 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Jul-06 03:16:08 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Jul-06 03:16:08 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jul-06 03:16:08 START begin_task: Starting task 'waiting on setcal' 2008-Jul-06 03:16:08 LOG5 begin_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2008-Jul-06 03:16:08 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Jul-06 03:16:08 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jul-06 03:16:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-06 03:16:08 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jul-06 03:16:08 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Jul-06 03:16:08 LOG5 end_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2008-Jul-06 03:16:08 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Jul-06 03:16:08 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jul-06 03:16:08 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Jul-06 03:16:08 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jul-06 03:16:08 LOG5 begin_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2008-Jul-06 03:16:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-06 03:16:08 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jul-06 03:16:08 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jul-06 03:16:08 LOG5 end_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2008-Jul-06 03:16:08 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jul-06 03:16:08 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Jul-06 03:16:08 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jul-06 03:16:08 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Jul-06 03:16:08 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jul-06 03:16:08 LOG5 begin_task: Level: (4) ID = <10025> Status = 0 0 0 0 ok 2008-Jul-06 03:16:08 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jul-06 03:16:08 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jul-06 03:16:08 LOG5 end_task: Level: (4) ID = <10025> Status = 0 0 0 0 ok 2008-Jul-06 03:16:08 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jul-06 03:16:08 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Jul-06 03:16:08 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Jul-06 03:16:08 LOG5 end_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2008-Jul-06 03:16:08 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2008-Jul-06 03:16:08 INFO2 astwait: Waiting for 165 seconds from 07:16:08 to 07:18:53 UTC ... 2008-Jul-06 03:16:08 LOG4 send_obs_status: To obs_status: <1> TASKTIME 165 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Jul-06 03:16:08 START begin_task: Starting task 'waiting on waiting for AST time' 2008-Jul-06 03:16:08 LOG5 begin_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-Jul-06 03:18:53 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2008-Jul-06 03:18:53 LOG5 end_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-Jul-06 03:18:53 INFO3 astwait: Finished waiting 2008-Jul-06 03:18:53 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Jul-06 03:18:53 LOG5 dopset_later: Calling 'dopset_later 61.105560263919479' 2008-Jul-06 03:18:53 INFO3 dopset_later: Setting Doppler correction for 03:19:53 (61.1 seconds from now) 2008-Jul-06 03:18:53 LOG5 antvel: Calling 'antvel 275.130000 14.182878 F 61.105560263919479' 2008-Jul-06 03:18:53 LOG2 antvel: Transforming current Az = 275.13 ZA = 14.18 to apparent RA = 22:50:26.3 Dec = +16:31:42.5 2008-Jul-06 03:18:53 LOG2 antvel: Parameters to Doppler: Heliocentric 26393 2008 188 0.0 2008-Jul-06 03:18:53 INFO5 antvel: Computed antenna velocity: -24.93389 km/s 2008-Jul-06 03:18:53 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-24.933891460600002 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Jul-06 03:18:53 INFO4 dopset_gen: New sky frequencies: 1381.358317 1381.358317 1381.358317 1381.358317 1381.358317 1381.358317 1381.358317 1381.358317 1381.358317 2008-Jul-06 03:18:53 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.358317 sky0=1381.358317 sky1=1381.358317 sky2=1381.358317 sky3=1381.358317 sky4=1381.358317 sky5=1381.358317 sky6=1381.358317 sky7=1381.358317 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jul-06 03:18:53 LOG2 dopset_gen: Result from 'sky2syn': 1631.358317 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jul-06 03:18:53 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631358317.0} 2008-Jul-06 03:18:53 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-06 03:18:53 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Jul-06 03:18:53 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Jul-06 03:18:53 INFO5 fixed_driftmap: Tracking J2000 position: RA = 22:49:03.0 Dec = +16:28:59.9 2008-Jul-06 03:18:53 LOG3 track_source: Calling 'track_source AGES7448_p1_061 224903.0 162859.9 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Jul-06 03:18:53 START begin_task: Starting task 'sending tracking commands' 2008-Jul-06 03:18:53 LOG5 begin_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2008-Jul-06 03:18:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7448_p1_061} INFO {Slewing to source 'AGES7448_p1_061' ...} 2008-Jul-06 03:18:53 INFO1 track_source: Starting to track AGES7448_p1_061 2008-Jul-06 03:18:53 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7448_p1_061" 2008-Jul-06 03:18:53 LOG3 vw_send: To DATATAKING: set ra 224903.0 2008-Jul-06 03:18:53 LOG3 vw_send: To DATATAKING: set dec 162859.9 2008-Jul-06 03:18:53 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Jul-06 03:18:53 LOG3 vw_send: To DATATAKING: pnt tr 224903.0 162859.9 -CJ 2008-Jul-06 03:18:53 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Jul-06 03:18:53 STOP finish_task: Finishing task 'sending tracking commands' 2008-Jul-06 03:18:53 LOG5 finish_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2008-Jul-06 03:18:53 INFO2 finish_task: DONE finished sending: tracking commands 2008-Jul-06 03:18:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-06 03:18:53 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Jul-06 03:18:53 LOG5 end_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2008-Jul-06 03:18:53 START begin_task: Starting task 'waiting on telescope' 2008-Jul-06 03:18:53 LOG5 begin_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2008-Jul-06 03:18:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Jul-06 03:18:53 LOG3 waittrk: Start waittrk 5 2008-Jul-06 03:18:53 START begin_task: Starting task 'waiting on telescope movement' 2008-Jul-06 03:18:53 LOG5 begin_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2008-Jul-06 03:18:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631358317.0} 2008-Jul-06 03:18:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-06 03:18:53 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7448_p1_061" 2008-Jul-06 03:18:53 LOG4 got_cormsg: From DATATAKING: set ra 224903.0 2008-Jul-06 03:18:53 LOG4 got_cormsg: From DATATAKING: set dec 162859.9 2008-Jul-06 03:18:53 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Jul-06 03:18:53 LOG4 got_cormsg: From DATATAKING: vw% 224903.0 2008-Jul-06 03:18:53 LOG4 got_cormsg: From DATATAKING: vw% 162859.9 2008-Jul-06 03:18:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-06 03:18:53 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Jul-06 03:18:53 LOG4 got_cormsg: From DATATAKING: pnt tr 224903.0 162859.9 -CJ 2008-Jul-06 03:18:53 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Jul-06 03:18:53 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Jul-06 03:18:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-06 03:18:58 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Jul-06 03:18:58 LOG5 end_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2008-Jul-06 03:18:58 START begin_task: Starting task 'waiting on telescope on source' 2008-Jul-06 03:18:58 LOG5 begin_task: Level: (4) ID = <10030> Status = 0 0 0 0 ok 2008-Jul-06 03:19:00 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Jul-06 03:19:00 LOG5 end_task: Level: (4) ID = <10030> Status = 0 0 0 0 ok 2008-Jul-06 03:19:00 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Jul-06 03:19:00 INFO2 waittrk: Now tracking AGES7448_p1_061 2008-Jul-06 03:19:00 LOG4 waittrk: Current telescope position: Az = 274.72 ZA = 14.17 2008-Jul-06 03:19:00 STOP finish_task: Finishing task 'waiting on telescope' 2008-Jul-06 03:19:00 LOG5 finish_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2008-Jul-06 03:19:00 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Jul-06 03:19:00 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-06 03:19:00 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Jul-06 03:19:00 LOG5 end_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2008-Jul-06 03:19:00 START begin_task: Starting task 'adjusting WAPP power' 2008-Jul-06 03:19:00 LOG5 begin_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2008-Jul-06 03:19:00 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Jul-06 03:19:00 INFO2 adjust_power: Starting to adjust WAPP power 2008-Jul-06 03:19:00 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Jul-06 03:19:00 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Jul-06 03:19:00 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jul-06 03:19:00 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Jul-06 03:19:00 LOG5 begin_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2008-Jul-06 03:19:01 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Jul-06 03:19:01 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jul-06 03:19:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-06 03:19:03 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jul-06 03:19:03 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Jul-06 03:19:03 LOG5 end_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2008-Jul-06 03:19:03 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Jul-06 03:19:03 START begin_task: Starting task 'adjusting WAPP power' 2008-Jul-06 03:19:03 LOG5 begin_task: Level: (4) ID = <10033> Status = 0 0 0 0 ok 2008-Jul-06 03:19:03 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Jul-06 03:19:03 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Jul-06 03:19:03 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Jul-06 03:19:03 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Jul-06 03:19:03 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Jul-06 03:19:03 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Jul-06 03:19:03 LOG5 begin_task: Level: (5) ID = <10034> Status = 0 0 0 0 ok 2008-Jul-06 03:19:03 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Jul-06 03:19:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-06 03:19:04 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 0 dB --- beam 1: 8 6 dB 2008-Jul-06 03:19:04 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 3 dB --- beam 5: 6 6 dB 2008-Jul-06 03:19:04 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Jul-06 03:19:04 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 3 2 dB 2008-Jul-06 03:19:04 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Jul-06 03:19:04 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Jul-06 03:19:04 LOG5 end_task: Level: (5) ID = <10034> Status = 0 0 0 0 ok 2008-Jul-06 03:19:04 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.122 0.507 ALFA beam 1: 0.878 1.034 2008-Jul-06 03:19:04 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.993 1.008 ALFA beam 3: 1.019 1.051 2008-Jul-06 03:19:04 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.031 0.915 ALFA beam 5: 1.088 0.902 2008-Jul-06 03:19:04 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.023 0.939 ALFA beam 7: 0.904 1.041 2008-Jul-06 03:19:04 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Jul-06 03:19:04 LOG5 finish_task: Level: (4) ID = <10033> Status = 0 0 0 0 ok 2008-Jul-06 03:19:04 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Jul-06 03:19:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-06 03:19:04 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Jul-06 03:19:04 LOG5 end_task: Level: (4) ID = <10033> Status = 0 0 0 0 ok 2008-Jul-06 03:19:04 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Jul-06 03:19:04 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Jul-06 03:19:04 LOG5 finish_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2008-Jul-06 03:19:04 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Jul-06 03:19:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-06 03:19:04 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Jul-06 03:19:04 LOG5 end_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2008-Jul-06 03:19:04 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 RT 2008-Jul-06 03:19:04 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 RT 2008-Jul-06 03:19:04 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 RT 2008-Jul-06 03:19:04 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 RT 2008-Jul-06 03:19:04 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20080706.a2048.0000.fits' is empty! 2008-Jul-06 03:19:04 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Jul-06 03:19:04 START begin_task: Starting task 'WAPP calibration' 2008-Jul-06 03:19:04 LOG5 begin_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2008-Jul-06 03:19:04 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Jul-06 03:19:04 START begin_task: Starting task 'selecting calibration type' 2008-Jul-06 03:19:04 LOG5 begin_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2008-Jul-06 03:19:04 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Jul-06 03:19:04 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Jul-06 03:19:04 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jul-06 03:19:04 START begin_task: Starting task 'waiting on setcal' 2008-Jul-06 03:19:04 LOG5 begin_task: Level: (5) ID = <10037> Status = 0 0 0 0 ok 2008-Jul-06 03:19:04 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 RT' 2008-Jul-06 03:19:04 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Jul-06 03:19:04 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jul-06 03:19:04 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-06 03:19:04 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jul-06 03:19:04 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Jul-06 03:19:04 LOG5 end_task: Level: (5) ID = <10037> Status = 0 0 0 0 ok 2008-Jul-06 03:19:04 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Jul-06 03:19:04 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jul-06 03:19:05 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Jul-06 03:19:05 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jul-06 03:19:05 LOG5 begin_task: Level: (5) ID = <10038> Status = 0 0 0 0 ok 2008-Jul-06 03:19:05 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jul-06 03:19:05 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jul-06 03:19:05 LOG5 end_task: Level: (5) ID = <10038> Status = 0 0 0 0 ok 2008-Jul-06 03:19:05 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jul-06 03:19:05 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Jul-06 03:19:05 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jul-06 03:19:05 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Jul-06 03:19:05 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jul-06 03:19:05 LOG5 begin_task: Level: (5) ID = <10039> Status = 0 0 0 0 ok 2008-Jul-06 03:19:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-06 03:19:05 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jul-06 03:19:05 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jul-06 03:19:05 LOG5 end_task: Level: (5) ID = <10039> Status = 0 0 0 0 ok 2008-Jul-06 03:19:05 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jul-06 03:19:05 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Jul-06 03:19:05 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Jul-06 03:19:05 LOG5 end_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2008-Jul-06 03:19:05 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Jul-06 03:19:05 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Jul-06 03:19:05 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Jul-06 03:19:05 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jul-06 03:19:05 LOG5 begin_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2008-Jul-06 03:19:05 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jul-06 03:19:05 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Jul-06 03:19:05 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jul-06 03:19:05 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jul-06 03:19:05 LOG5 end_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2008-Jul-06 03:19:05 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Jul-06 03:19:05 LOG4 take_data: Calling 'take_data 5 5 CAL ON -' 2008-Jul-06 03:19:05 START begin_task: Starting task 'WAPP spectral observation' 2008-Jul-06 03:19:05 LOG5 begin_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2008-Jul-06 03:19:05 LOG5 log_alfabeam: Parameters: 22.817499999999999 16.483305555555553 21.844140 2008.5150944621898 -82.000092 2008-Jul-06 03:19:05 LOG4 log_alfabeam: ALFABEAM 0 22.817499999999999 16.483305555555571 2008-Jul-06 03:19:05 LOG4 log_alfabeam: ALFABEAM 1 22.819235647782705 16.392886872376078 2008-Jul-06 03:19:05 LOG4 log_alfabeam: ALFABEAM 2 22.824590805466499 16.453024486861267 2008-Jul-06 03:19:05 LOG4 log_alfabeam: ALFABEAM 3 22.822830200082443 16.543707675942997 2008-Jul-06 03:19:05 LOG4 log_alfabeam: ALFABEAM 4 22.815723172511763 16.573341386315285 2008-Jul-06 03:19:05 LOG4 log_alfabeam: ALFABEAM 5 22.810404057468443 16.513351201005584 2008-Jul-06 03:19:05 LOG4 log_alfabeam: ALFABEAM 6 22.812156077301221 16.423579023137414 2008-Jul-06 03:19:05 INFO2 take_data: Starting WAPP scan: 818800001 2008-Jul-06 03:19:05 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Jul-06 03:19:05 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jul-06 03:19:05 LOG5 begin_task: Level: (5) ID = <10042> Status = 0 0 0 0 ok 2008-Jul-06 03:19:05 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jul-06 03:19:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.507 < 0.75)! 2008-Jul-06 03:19:05 LOG4 check_wapp_levels: WAPP-1 power levels: 1.122 0.507 0.878 1.034 2008-Jul-06 03:19:05 LOG4 check_wapp_levels: WAPP-2 power levels: 0.993 1.008 1.019 1.051 2008-Jul-06 03:19:05 LOG4 check_wapp_levels: WAPP-3 power levels: 1.031 0.915 1.088 0.902 2008-Jul-06 03:19:05 LOG4 check_wapp_levels: WAPP-4 power levels: 1.023 0.939 0.903 1.041 2008-Jul-06 03:19:05 INFO1 WAPP=1+2+3+4-start_spectra: start sec 26346.00 2008-Jul-06 03:19:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.358317 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jul-06 03:19:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.358317 MHz Flip = 1 Band = 0 Mixer = 1569.021370 MHz 2008-Jul-06 03:19:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.358317 MHz Flip = 1 Band = 0 Mixer = 1706.306008 MHz 2008-Jul-06 03:19:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.358317 MHz Flip = 1 Band = 0 Mixer = 1863.798385 MHz 2008-Jul-06 03:19:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.358317 MHz Flip = 1 Band = 0 Mixer = 1950.978630 MHz 2008-Jul-06 03:19:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.358317 MHz Flip = 1 Band = 0 Mixer = 1049.015000 MHz 2008-Jul-06 03:19:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.358317 MHz Flip = 1 Band = 0 Mixer = 1186.304000 MHz 2008-Jul-06 03:19:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.358317 MHz Flip = 1 Band = 0 Mixer = 1343.802000 MHz 2008-Jul-06 03:19:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.358317 MHz Flip = 1 Band = 0 Mixer = 1430.985000 MHz 2008-Jul-06 03:19:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (499999966 != 499999967)! 2008-Jul-06 03:19:11 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jul-06 03:19:11 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jul-06 03:19:11 LOG5 end_task: Level: (5) ID = <10042> Status = 0 0 0 0 ok 2008-Jul-06 03:19:11 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jul-06 03:19:11 LOG5 end_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2008-Jul-06 03:19:11 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Jul-06 03:19:11 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Jul-06 03:19:11 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Jul-06 03:19:11 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jul-06 03:19:11 LOG5 begin_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2008-Jul-06 03:19:11 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jul-06 03:19:11 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jul-06 03:19:11 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jul-06 03:19:11 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jul-06 03:19:11 LOG5 end_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2008-Jul-06 03:19:11 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Jul-06 03:19:11 LOG4 take_data: Calling 'take_data 5 5 CAL OFF -' 2008-Jul-06 03:19:11 START begin_task: Starting task 'WAPP spectral observation' 2008-Jul-06 03:19:11 LOG5 begin_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2008-Jul-06 03:19:11 LOG5 log_alfabeam: Parameters: 22.817499999999999 16.483305555555553 21.845811 2008.5150946523183 -82.000092 2008-Jul-06 03:19:11 LOG4 log_alfabeam: ALFABEAM 0 22.817499999999992 16.483305555555557 2008-Jul-06 03:19:11 LOG4 log_alfabeam: ALFABEAM 1 22.819234650946612 16.392882721314677 2008-Jul-06 03:19:11 LOG4 log_alfabeam: ALFABEAM 2 22.824590480217196 16.453008711721498 2008-Jul-06 03:19:11 LOG4 log_alfabeam: ALFABEAM 3 22.822830827988728 16.543696552697138 2008-Jul-06 03:19:11 LOG4 log_alfabeam: ALFABEAM 4 22.815724096999240 16.573344964711623 2008-Jul-06 03:19:11 LOG4 log_alfabeam: ALFABEAM 5 22.810404374619011 16.513366669898055 2008-Jul-06 03:19:11 LOG4 log_alfabeam: ALFABEAM 6 22.812155426895213 16.423591410888395 2008-Jul-06 03:19:11 INFO2 take_data: Starting WAPP scan: 818800002 2008-Jul-06 03:19:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Jul-06 03:19:12 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jul-06 03:19:12 LOG5 begin_task: Level: (5) ID = <10045> Status = 0 0 0 0 ok 2008-Jul-06 03:19:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jul-06 03:19:12 INFO5 check_wapp_levels: WAPP power levels are between 0.654 and 1.528 (still bad) 2008-Jul-06 03:19:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 26353.00 2008-Jul-06 03:19:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.358317 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jul-06 03:19:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.358317 MHz Flip = 1 Band = 0 Mixer = 1569.021370 MHz 2008-Jul-06 03:19:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.358317 MHz Flip = 1 Band = 0 Mixer = 1706.306008 MHz 2008-Jul-06 03:19:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.358317 MHz Flip = 1 Band = 0 Mixer = 1863.798385 MHz 2008-Jul-06 03:19:18 INFO5 check_wapp_levels: WAPP power levels are between 0.654 and 1.528 (still bad) 2008-Jul-06 03:19:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.358317 MHz Flip = 1 Band = 0 Mixer = 1950.978630 MHz 2008-Jul-06 03:19:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.358317 MHz Flip = 1 Band = 0 Mixer = 1049.015000 MHz 2008-Jul-06 03:19:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.358317 MHz Flip = 1 Band = 0 Mixer = 1186.304000 MHz 2008-Jul-06 03:19:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.358317 MHz Flip = 1 Band = 0 Mixer = 1343.802000 MHz 2008-Jul-06 03:19:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.358317 MHz Flip = 1 Band = 0 Mixer = 1430.985000 MHz 2008-Jul-06 03:19:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (499999966 != 499999967)! 2008-Jul-06 03:19:18 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Jul-06 03:19:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jul-06 03:19:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (499999966 != 499999967)! 2008-Jul-06 03:19:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (499999966 != 499999967)! 2008-Jul-06 03:19:18 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jul-06 03:19:18 LOG5 end_task: Level: (5) ID = <10045> Status = 0 0 0 0 ok 2008-Jul-06 03:19:18 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jul-06 03:19:18 LOG5 end_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2008-Jul-06 03:19:18 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Jul-06 03:19:18 STOP finish_task: Finishing task 'WAPP calibration' 2008-Jul-06 03:19:18 LOG5 finish_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2008-Jul-06 03:19:18 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Jul-06 03:19:18 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-06 03:19:18 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Jul-06 03:19:18 LOG5 end_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2008-Jul-06 03:19:18 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Jul-06 03:19:18 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 275.13 and ZA = 14.18 2008-Jul-06 03:19:18 LOG3 track_source: Calling 'track_source AGES7448_p1_061 275.13 14.1828780957 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Jul-06 03:19:18 START begin_task: Starting task 'sending tracking commands' 2008-Jul-06 03:19:18 LOG5 begin_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2008-Jul-06 03:19:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7448_p1_061} INFO {Slewing to source 'AGES7448_p1_061' ...} 2008-Jul-06 03:19:18 INFO1 track_source: Starting to track AGES7448_p1_061 2008-Jul-06 03:19:18 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7448_p1_061" 2008-Jul-06 03:19:18 LOG3 vw_send: To DATATAKING: set ra 275.13 2008-Jul-06 03:19:18 LOG3 vw_send: To DATATAKING: set dec 14.1828780957 2008-Jul-06 03:19:18 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Jul-06 03:19:19 LOG3 vw_send: To DATATAKING: pnt tr 275.13 14.1828780957 -CF 2008-Jul-06 03:19:19 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Jul-06 03:19:19 STOP finish_task: Finishing task 'sending tracking commands' 2008-Jul-06 03:19:19 LOG5 finish_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2008-Jul-06 03:19:19 INFO2 finish_task: DONE finished sending: tracking commands 2008-Jul-06 03:19:19 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-06 03:19:19 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Jul-06 03:19:19 LOG5 end_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2008-Jul-06 03:19:19 LOG1 fixed_driftmap: Parameters: HA = -00:58:59.3 Start = 21:51:27.1 LST = 21:50:51.9 diff = 35.2 secs 2008-Jul-06 03:19:19 INFO2 fixed_driftmap: Waiting 33.2 seconds for RA 22:50:26 2008-Jul-06 03:19:19 INFO2 lstwait: Waiting for 33.1 secs from LST 21:50:52 to LST 21:51:25 ... 2008-Jul-06 03:19:19 LOG4 send_obs_status: To obs_status: <1> TASKTIME 33.114596038963761 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Jul-06 03:19:19 START begin_task: Starting task 'waiting on wait on LST' 2008-Jul-06 03:19:19 LOG5 begin_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2008-Jul-06 03:19:19 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7448_p1_061" 2008-Jul-06 03:19:19 LOG4 got_cormsg: From DATATAKING: set ra 275.13 2008-Jul-06 03:19:19 LOG4 got_cormsg: From DATATAKING: set dec 14.1828780957 2008-Jul-06 03:19:19 LOG4 got_cormsg: From DATATAKING: vw% 275.13 2008-Jul-06 03:19:19 LOG4 got_cormsg: From DATATAKING: vw% 14.1828780957 2008-Jul-06 03:19:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-06 03:19:19 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Jul-06 03:19:19 LOG4 got_cormsg: From DATATAKING: pnt tr 275.13 14.1828780957 -CF 2008-Jul-06 03:19:19 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Jul-06 03:19:19 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Jul-06 03:19:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-06 03:19:24 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.127 (still bad) 2008-Jul-06 03:19:52 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Jul-06 03:19:52 LOG5 end_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2008-Jul-06 03:19:52 LOG4 lstwait: Finished waiting 0.89 seconds late 2008-Jul-06 03:19:52 INFO3 lstwait: Finished waiting 2008-Jul-06 03:19:52 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Jul-06 03:19:52 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Jul-06 03:19:52 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Jul-06 03:19:52 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Jul-06 03:19:52 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Jul-06 03:19:52 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ -' 2008-Jul-06 03:19:52 START begin_task: Starting task 'WAPP spectral observation' 2008-Jul-06 03:19:52 LOG5 begin_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2008-Jul-06 03:19:52 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jul-06 03:19:52 INFO2 take_data: Starting WAPP scan: 818800003 2008-Jul-06 03:19:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Jul-06 03:19:52 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jul-06 03:19:52 LOG5 begin_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2008-Jul-06 03:19:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jul-06 03:19:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 26393.00 2008-Jul-06 03:19:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.358317 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jul-06 03:19:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.358317 MHz Flip = 1 Band = 0 Mixer = 1569.021370 MHz 2008-Jul-06 03:19:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.358317 MHz Flip = 1 Band = 0 Mixer = 1706.306008 MHz 2008-Jul-06 03:19:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.358317 MHz Flip = 1 Band = 0 Mixer = 1863.798385 MHz 2008-Jul-06 03:19:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.358317 MHz Flip = 1 Band = 0 Mixer = 1950.978630 MHz 2008-Jul-06 03:19:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.358317 MHz Flip = 1 Band = 0 Mixer = 1049.015000 MHz 2008-Jul-06 03:19:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.358317 MHz Flip = 1 Band = 0 Mixer = 1186.304000 MHz 2008-Jul-06 03:19:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.358317 MHz Flip = 1 Band = 0 Mixer = 1343.802000 MHz 2008-Jul-06 03:19:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.358317 MHz Flip = 1 Band = 0 Mixer = 1430.985000 MHz 2008-Jul-06 03:19:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-06 03:19:54 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.123 (still bad) 2008-Jul-06 03:19:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-06 03:19:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-06 03:19:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-06 03:19:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-06 03:19:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Jul-06 03:19:56 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.125 (still bad) 2008-Jul-06 03:19:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-06 03:19:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Jul-06 03:19:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-06 03:19:58 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.126 (still bad) 2008-Jul-06 03:19:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-06 03:20:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-06 03:20:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-06 03:20:00 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.121 (still bad) 2008-Jul-06 03:20:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-06 03:20:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-06 03:20:02 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.125 (still bad) 2008-Jul-06 03:20:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-06 03:20:04 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Jul-06 03:20:04 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.133 (still bad) 2008-Jul-06 03:20:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-06 03:20:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.518 < 0.75)! 2008-Jul-06 03:20:06 LOG4 check_wapp_levels: WAPP-1 power levels: 1.120 0.518 0.883 1.036 2008-Jul-06 03:20:06 LOG4 check_wapp_levels: WAPP-2 power levels: 0.995 1.010 1.023 1.069 2008-Jul-06 03:20:06 LOG4 check_wapp_levels: WAPP-3 power levels: 1.047 0.931 1.083 0.900 2008-Jul-06 03:20:06 LOG4 check_wapp_levels: WAPP-4 power levels: 1.043 0.958 0.914 1.059 2008-Jul-06 03:20:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-06 03:20:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-06 03:20:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-06 03:20:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Jul-06 03:20:08 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.119 (still bad) 2008-Jul-06 03:20:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-06 03:20:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-06 03:20:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Jul-06 03:20:10 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.122 (still bad) 2008-Jul-06 03:20:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-06 03:20:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-06 03:20:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Jul-06 03:20:12 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.119 (still bad) 2008-Jul-06 03:20:13 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-06 03:20:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-06 03:20:14 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.121 (still bad) 2008-Jul-06 03:20:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-06 03:20:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-06 03:20:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Jul-06 03:20:17 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.132 (still bad) 2008-Jul-06 03:20:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999967)! 2008-Jul-06 03:20:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-06 03:20:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-06 03:20:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-06 03:20:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-06 03:20:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Jul-06 03:20:19 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.122 (still bad) 2008-Jul-06 03:20:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-06 03:20:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-06 03:20:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Jul-06 03:20:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-06 03:20:21 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.123 (still bad) 2008-Jul-06 03:20:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Jul-06 03:20:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-06 03:20:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-06 03:20:23 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.125 (still bad) 2008-Jul-06 03:20:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-06 03:20:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-06 03:20:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-06 03:20:25 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.127 (still bad) 2008-Jul-06 03:20:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-06 03:20:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-06 03:20:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-06 03:20:27 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.130 (still bad) 2008-Jul-06 03:20:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-06 03:20:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-06 03:20:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Jul-06 03:20:29 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.133 (still bad) 2008-Jul-06 03:20:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-06 03:20:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-06 03:20:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-06 03:20:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-06 03:20:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-06 03:20:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-06 03:20:31 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.126 (still bad) 2008-Jul-06 03:20:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Jul-06 03:20:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-06 03:20:33 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.123 (still bad) 2008-Jul-06 03:20:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-06 03:20:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-06 03:20:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-06 03:20:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-06 03:20:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-06 03:20:35 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.128 (still bad) 2008-Jul-06 03:20:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-06 03:20:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-06 03:20:37 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.124 (still bad) 2008-Jul-06 03:20:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-06 03:20:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Jul-06 03:20:38 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Jul-06 03:20:39 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.125 (still bad) 2008-Jul-06 03:20:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-06 03:20:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-06 03:20:41 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.132 (still bad) 2008-Jul-06 03:20:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-06 03:20:43 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.127 (still bad) 2008-Jul-06 03:20:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-06 03:20:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-06 03:20:45 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.119 (still bad) 2008-Jul-06 03:20:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-06 03:20:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Jul-06 03:20:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-06 03:20:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-06 03:20:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-06 03:20:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-06 03:20:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Jul-06 03:20:47 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.124 (still bad) 2008-Jul-06 03:20:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-06 03:20:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-06 03:20:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-06 03:20:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-06 03:20:49 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.121 (still bad) 2008-Jul-06 03:20:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-06 03:20:51 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.124 (still bad) 2008-Jul-06 03:20:51 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-06 03:20:53 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-06 03:20:53 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.134 (still bad) 2008-Jul-06 03:20:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-06 03:20:55 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.128 (still bad) 2008-Jul-06 03:20:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-06 03:20:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-06 03:20:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-06 03:20:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Jul-06 03:20:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-06 03:20:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-06 03:20:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Jul-06 03:20:57 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.127 (still bad) 2008-Jul-06 03:20:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-06 03:20:59 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.132 (still bad) 2008-Jul-06 03:21:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-06 03:21:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-06 03:21:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-06 03:21:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-06 03:21:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Jul-06 03:21:01 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.131 (still bad) 2008-Jul-06 03:21:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-06 03:21:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Jul-06 03:21:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-06 03:21:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-06 03:21:03 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.135 (still bad) 2008-Jul-06 03:21:04 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-06 03:21:04 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-06 03:21:05 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.142 (still bad) 2008-Jul-06 03:21:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-06 03:21:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-06 03:21:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.521 < 0.75)! 2008-Jul-06 03:21:07 LOG4 check_wapp_levels: WAPP-1 power levels: 1.131 0.521 0.884 1.036 2008-Jul-06 03:21:07 LOG4 check_wapp_levels: WAPP-2 power levels: 0.994 1.010 1.026 1.071 2008-Jul-06 03:21:07 LOG4 check_wapp_levels: WAPP-3 power levels: 1.047 0.934 1.088 0.901 2008-Jul-06 03:21:07 LOG4 check_wapp_levels: WAPP-4 power levels: 1.045 0.937 0.914 1.035 2008-Jul-06 03:21:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-06 03:21:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-06 03:21:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Jul-06 03:21:09 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.128 (still bad) 2008-Jul-06 03:21:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-06 03:21:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Jul-06 03:21:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Jul-06 03:21:11 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.133 (still bad) 2008-Jul-06 03:21:13 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.132 (still bad) 2008-Jul-06 03:21:15 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.132 (still bad) 2008-Jul-06 03:21:17 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.144 (still bad) 2008-Jul-06 03:21:19 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.142 (still bad) 2008-Jul-06 03:21:21 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.141 (still bad) 2008-Jul-06 03:21:23 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.141 (still bad) 2008-Jul-06 03:21:25 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.143 (still bad) 2008-Jul-06 03:21:27 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.140 (still bad) 2008-Jul-06 03:21:29 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.136 (still bad) 2008-Jul-06 03:21:32 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.129 (still bad) 2008-Jul-06 03:21:34 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.128 (still bad) 2008-Jul-06 03:21:36 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.127 (still bad) 2008-Jul-06 03:21:38 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.123 (still bad) 2008-Jul-06 03:21:40 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.125 (still bad) 2008-Jul-06 03:21:42 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.124 (still bad) 2008-Jul-06 03:21:44 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.124 (still bad) 2008-Jul-06 03:21:46 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.126 (still bad) 2008-Jul-06 03:21:48 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.121 (still bad) 2008-Jul-06 03:21:50 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.124 (still bad) 2008-Jul-06 03:21:52 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.127 (still bad) 2008-Jul-06 03:21:54 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.124 (still bad) 2008-Jul-06 03:21:56 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.120 (still bad) 2008-Jul-06 03:21:58 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.122 (still bad) 2008-Jul-06 03:22:00 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.119 (still bad) 2008-Jul-06 03:22:02 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.123 (still bad) 2008-Jul-06 03:22:04 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.130 (still bad) 2008-Jul-06 03:22:06 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.120 (still bad) 2008-Jul-06 03:22:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.518 < 0.75)! 2008-Jul-06 03:22:08 LOG4 check_wapp_levels: WAPP-1 power levels: 1.119 0.518 0.881 1.032 2008-Jul-06 03:22:08 LOG4 check_wapp_levels: WAPP-2 power levels: 0.997 1.013 1.023 1.068 2008-Jul-06 03:22:08 LOG4 check_wapp_levels: WAPP-3 power levels: 1.049 0.936 1.087 0.903 2008-Jul-06 03:22:08 LOG4 check_wapp_levels: WAPP-4 power levels: 1.044 0.942 0.913 1.042 2008-Jul-06 03:22:10 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.123 (still bad) 2008-Jul-06 03:22:12 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.118 (still bad) 2008-Jul-06 03:22:14 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.123 (still bad) 2008-Jul-06 03:22:16 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.128 (still bad) 2008-Jul-06 03:22:18 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.124 (still bad) 2008-Jul-06 03:22:20 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.124 (still bad) 2008-Jul-06 03:22:22 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.128 (still bad) 2008-Jul-06 03:22:24 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.120 (still bad) 2008-Jul-06 03:22:26 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.121 (still bad) 2008-Jul-06 03:22:28 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.130 (still bad) 2008-Jul-06 03:22:30 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.123 (still bad) 2008-Jul-06 03:22:32 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.124 (still bad) 2008-Jul-06 03:22:34 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.128 (still bad) 2008-Jul-06 03:22:36 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.122 (still bad) 2008-Jul-06 03:22:38 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.125 (still bad) 2008-Jul-06 03:22:40 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.128 (still bad) 2008-Jul-06 03:22:42 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.127 (still bad) 2008-Jul-06 03:22:44 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.121 (still bad) 2008-Jul-06 03:22:46 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.125 (still bad) 2008-Jul-06 03:22:48 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.117 (still bad) 2008-Jul-06 03:22:50 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.121 (still bad) 2008-Jul-06 03:22:52 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.128 (still bad) 2008-Jul-06 03:22:54 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.125 (still bad) 2008-Jul-06 03:22:57 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.119 (still bad) 2008-Jul-06 03:22:59 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.124 (still bad) 2008-Jul-06 03:23:01 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.122 (still bad) 2008-Jul-06 03:23:03 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.127 (still bad) 2008-Jul-06 03:23:05 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.125 (still bad) 2008-Jul-06 03:23:07 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.126 (still bad) 2008-Jul-06 03:23:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.517 < 0.75)! 2008-Jul-06 03:23:09 LOG4 check_wapp_levels: WAPP-1 power levels: 1.123 0.517 0.926 1.082 2008-Jul-06 03:23:09 LOG4 check_wapp_levels: WAPP-2 power levels: 0.992 1.010 1.022 1.069 2008-Jul-06 03:23:09 LOG4 check_wapp_levels: WAPP-3 power levels: 1.049 0.934 1.081 0.899 2008-Jul-06 03:23:09 LOG4 check_wapp_levels: WAPP-4 power levels: 1.045 0.964 0.913 1.064 2008-Jul-06 03:23:11 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.126 (still bad) 2008-Jul-06 03:23:13 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.126 (still bad) 2008-Jul-06 03:23:15 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.128 (still bad) 2008-Jul-06 03:23:17 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.128 (still bad) 2008-Jul-06 03:23:19 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.123 (still bad) 2008-Jul-06 03:23:21 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.119 (still bad) 2008-Jul-06 03:23:23 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.121 (still bad) 2008-Jul-06 03:23:25 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.123 (still bad) 2008-Jul-06 03:23:27 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.121 (still bad) 2008-Jul-06 03:23:29 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.126 (still bad) 2008-Jul-06 03:23:31 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.119 (still bad) 2008-Jul-06 03:23:33 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.123 (still bad) 2008-Jul-06 03:23:35 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.122 (still bad) 2008-Jul-06 03:23:37 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.121 (still bad) 2008-Jul-06 03:23:39 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.122 (still bad) 2008-Jul-06 03:23:41 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.122 (still bad) 2008-Jul-06 03:23:43 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.122 (still bad) 2008-Jul-06 03:23:45 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.120 (still bad) 2008-Jul-06 03:23:47 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.125 (still bad) 2008-Jul-06 03:23:49 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.125 (still bad) 2008-Jul-06 03:23:51 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.120 (still bad) 2008-Jul-06 03:23:53 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.123 (still bad) 2008-Jul-06 03:23:55 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.125 (still bad) 2008-Jul-06 03:23:57 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.122 (still bad) 2008-Jul-06 03:23:59 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.121 (still bad) 2008-Jul-06 03:24:01 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.120 (still bad) 2008-Jul-06 03:24:03 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.118 (still bad) 2008-Jul-06 03:24:05 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.121 (still bad) 2008-Jul-06 03:24:07 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.118 (still bad) 2008-Jul-06 03:24:09 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.120 (still bad) 2008-Jul-06 03:24:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.517 < 0.75)! 2008-Jul-06 03:24:11 LOG4 check_wapp_levels: WAPP-1 power levels: 1.121 0.517 0.884 1.041 2008-Jul-06 03:24:11 LOG4 check_wapp_levels: WAPP-2 power levels: 0.992 1.006 1.022 1.067 2008-Jul-06 03:24:11 LOG4 check_wapp_levels: WAPP-3 power levels: 1.042 0.930 1.085 0.900 2008-Jul-06 03:24:11 LOG4 check_wapp_levels: WAPP-4 power levels: 1.043 0.961 0.912 1.062 2008-Jul-06 03:24:13 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.121 (still bad) 2008-Jul-06 03:24:15 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.119 (still bad) 2008-Jul-06 03:24:17 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.120 (still bad) 2008-Jul-06 03:24:19 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.115 (still bad) 2008-Jul-06 03:24:22 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.116 (still bad) 2008-Jul-06 03:24:24 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.117 (still bad) 2008-Jul-06 03:24:26 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.118 (still bad) 2008-Jul-06 03:24:28 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.119 (still bad) 2008-Jul-06 03:24:30 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.122 (still bad) 2008-Jul-06 03:24:32 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.120 (still bad) 2008-Jul-06 03:24:34 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.117 (still bad) 2008-Jul-06 03:24:36 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.123 (still bad) 2008-Jul-06 03:24:38 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.117 (still bad) 2008-Jul-06 03:24:40 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.123 (still bad) 2008-Jul-06 03:24:42 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.122 (still bad) 2008-Jul-06 03:24:44 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.115 (still bad) 2008-Jul-06 03:24:46 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.119 (still bad) 2008-Jul-06 03:24:48 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.115 (still bad) 2008-Jul-06 03:24:50 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.118 (still bad) 2008-Jul-06 03:24:52 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.122 (still bad) 2008-Jul-06 03:24:54 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.121 (still bad) 2008-Jul-06 03:24:56 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.116 (still bad) 2008-Jul-06 03:24:58 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.122 (still bad) 2008-Jul-06 03:25:00 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.117 (still bad) 2008-Jul-06 03:25:02 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.120 (still bad) 2008-Jul-06 03:25:04 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.120 (still bad) 2008-Jul-06 03:25:06 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.121 (still bad) 2008-Jul-06 03:25:08 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.120 (still bad) 2008-Jul-06 03:25:10 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.117 (still bad) 2008-Jul-06 03:25:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.516 < 0.75)! 2008-Jul-06 03:25:12 LOG4 check_wapp_levels: WAPP-1 power levels: 1.119 0.516 0.878 1.034 2008-Jul-06 03:25:12 LOG4 check_wapp_levels: WAPP-2 power levels: 0.986 1.002 1.019 1.065 2008-Jul-06 03:25:12 LOG4 check_wapp_levels: WAPP-3 power levels: 1.038 0.928 1.079 0.897 2008-Jul-06 03:25:12 LOG4 check_wapp_levels: WAPP-4 power levels: 1.038 0.933 0.908 1.030 2008-Jul-06 03:25:14 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.117 (still bad) 2008-Jul-06 03:25:16 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.119 (still bad) 2008-Jul-06 03:25:18 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.121 (still bad) 2008-Jul-06 03:25:20 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.117 (still bad) 2008-Jul-06 03:25:22 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.122 (still bad) 2008-Jul-06 03:25:24 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.113 (still bad) 2008-Jul-06 03:25:26 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.118 (still bad) 2008-Jul-06 03:25:28 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.118 (still bad) 2008-Jul-06 03:25:30 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.117 (still bad) 2008-Jul-06 03:25:32 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.113 (still bad) 2008-Jul-06 03:25:34 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.118 (still bad) 2008-Jul-06 03:25:36 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.118 (still bad) 2008-Jul-06 03:25:38 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.114 (still bad) 2008-Jul-06 03:25:40 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.118 (still bad) 2008-Jul-06 03:25:43 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.117 (still bad) 2008-Jul-06 03:25:45 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.116 (still bad) 2008-Jul-06 03:25:47 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.120 (still bad) 2008-Jul-06 03:25:49 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.118 (still bad) 2008-Jul-06 03:25:51 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.115 (still bad) 2008-Jul-06 03:25:53 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.121 (still bad) 2008-Jul-06 03:25:55 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.120 (still bad) 2008-Jul-06 03:25:57 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.116 (still bad) 2008-Jul-06 03:25:59 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.116 (still bad) 2008-Jul-06 03:26:01 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.118 (still bad) 2008-Jul-06 03:26:03 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.117 (still bad) 2008-Jul-06 03:26:05 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.122 (still bad) 2008-Jul-06 03:26:07 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.120 (still bad) 2008-Jul-06 03:26:09 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.116 (still bad) 2008-Jul-06 03:26:11 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.117 (still bad) 2008-Jul-06 03:26:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.515 < 0.75)! 2008-Jul-06 03:26:13 LOG4 check_wapp_levels: WAPP-1 power levels: 1.113 0.515 0.879 1.035 2008-Jul-06 03:26:13 LOG4 check_wapp_levels: WAPP-2 power levels: 0.988 1.002 1.018 1.066 2008-Jul-06 03:26:13 LOG4 check_wapp_levels: WAPP-3 power levels: 1.041 0.932 1.078 0.898 2008-Jul-06 03:26:13 LOG4 check_wapp_levels: WAPP-4 power levels: 1.037 0.950 0.907 1.050 2008-Jul-06 03:26:15 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.113 (still bad) 2008-Jul-06 03:26:17 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.120 (still bad) 2008-Jul-06 03:26:19 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.117 (still bad) 2008-Jul-06 03:26:21 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.120 (still bad) 2008-Jul-06 03:26:23 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.120 (still bad) 2008-Jul-06 03:26:25 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.119 (still bad) 2008-Jul-06 03:26:27 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.120 (still bad) 2008-Jul-06 03:26:29 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.124 (still bad) 2008-Jul-06 03:26:31 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.116 (still bad) 2008-Jul-06 03:26:33 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.118 (still bad) 2008-Jul-06 03:26:35 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.122 (still bad) 2008-Jul-06 03:26:37 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.118 (still bad) 2008-Jul-06 03:26:39 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.118 (still bad) 2008-Jul-06 03:26:41 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.121 (still bad) 2008-Jul-06 03:26:43 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.118 (still bad) 2008-Jul-06 03:26:45 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.120 (still bad) 2008-Jul-06 03:26:47 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.119 (still bad) 2008-Jul-06 03:26:49 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.114 (still bad) 2008-Jul-06 03:26:51 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.115 (still bad) 2008-Jul-06 03:26:53 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.123 (still bad) 2008-Jul-06 03:26:55 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.117 (still bad) 2008-Jul-06 03:26:57 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.116 (still bad) 2008-Jul-06 03:26:59 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.118 (still bad) 2008-Jul-06 03:27:01 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.116 (still bad) 2008-Jul-06 03:27:03 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.116 (still bad) 2008-Jul-06 03:27:05 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.122 (still bad) 2008-Jul-06 03:27:08 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.114 (still bad) 2008-Jul-06 03:27:10 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.119 (still bad) 2008-Jul-06 03:27:12 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.118 (still bad) 2008-Jul-06 03:27:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.515 < 0.75)! 2008-Jul-06 03:27:14 LOG4 check_wapp_levels: WAPP-1 power levels: 1.115 0.515 0.880 1.032 2008-Jul-06 03:27:14 LOG4 check_wapp_levels: WAPP-2 power levels: 0.989 1.003 1.017 1.067 2008-Jul-06 03:27:14 LOG4 check_wapp_levels: WAPP-3 power levels: 1.043 0.930 1.078 0.900 2008-Jul-06 03:27:14 LOG4 check_wapp_levels: WAPP-4 power levels: 1.039 0.964 0.908 1.065 2008-Jul-06 03:27:16 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.118 (still bad) 2008-Jul-06 03:27:18 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.126 (still bad) 2008-Jul-06 03:27:20 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.119 (still bad) 2008-Jul-06 03:27:22 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.119 (still bad) 2008-Jul-06 03:27:24 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.117 (still bad) 2008-Jul-06 03:27:26 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.114 (still bad) 2008-Jul-06 03:27:28 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.117 (still bad) 2008-Jul-06 03:27:30 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.122 (still bad) 2008-Jul-06 03:27:32 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.115 (still bad) 2008-Jul-06 03:27:34 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.113 (still bad) 2008-Jul-06 03:27:36 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.121 (still bad) 2008-Jul-06 03:27:38 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.116 (still bad) 2008-Jul-06 03:27:40 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.119 (still bad) 2008-Jul-06 03:27:42 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.129 (still bad) 2008-Jul-06 03:27:44 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.115 (still bad) 2008-Jul-06 03:27:46 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.119 (still bad) 2008-Jul-06 03:27:48 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.121 (still bad) 2008-Jul-06 03:27:50 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.118 (still bad) 2008-Jul-06 03:27:52 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.118 (still bad) 2008-Jul-06 03:27:54 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.123 (still bad) 2008-Jul-06 03:27:56 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.119 (still bad) 2008-Jul-06 03:27:58 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.114 (still bad) 2008-Jul-06 03:28:00 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.119 (still bad) 2008-Jul-06 03:28:02 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.117 (still bad) 2008-Jul-06 03:28:04 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.118 (still bad) 2008-Jul-06 03:28:06 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.125 (still bad) 2008-Jul-06 03:28:08 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.117 (still bad) 2008-Jul-06 03:28:10 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.116 (still bad) 2008-Jul-06 03:28:12 INFO5 check_wapp_levels: WAPP power levels are between 0.5