2008-Jul-01 03:42:09 BEGIN executive: CIMA executive starting ... 2008-Jul-01 03:42:09 NOTE executive: STARTING NEW CIMA SESSION 2008-Jul-01 03:42:09 INFO1 executive: Using CIMA version 3.0.00 'next' from 2008-06-12 15:50 2008-Jul-01 03:42:09 INFO4 executive: This is an ON-LINE session 2008-Jul-01 03:42:09 INFO4 executive: This is a LOCAL session 2008-Jul-01 03:42:09 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2008-Jul-01 03:42:09 INFO1 executive: CIMA session for project 'a2048' in 'line' mode for 'Minchin' 2008-Jul-01 03:42:09 INFO2 executive: Logging to '/share/obs4/usr/a2048/a2048.cimalog_20080701' 2008-Jul-01 03:42:10 LOG2 log_preferences: Currently applied preferences: 2008-Jul-01 03:42:10 LOG2 log_preferences: prefs(dailylog) = daily 2008-Jul-01 03:42:10 LOG2 log_preferences: prefs(offlinelog) = skip 2008-Jul-01 03:42:10 LOG2 log_preferences: prefs(datawindow) = ignore 2008-Jul-01 03:42:10 LOG2 log_preferences: prefs(limitwarning) = enabled 2008-Jul-01 03:42:10 LOG2 log_preferences: prefs(wappfailure) = abort 2008-Jul-01 03:42:10 LOG2 log_preferences: prefs(helpstyle) = stay-open 2008-Jul-01 03:42:10 LOG2 log_preferences: prefs(logcolours) = full 2008-Jul-01 03:42:10 LOG2 log_preferences: prefs(displaylevel) = INFO3 2008-Jul-01 03:42:10 LOG2 log_preferences: prefs(loglevel) = LOG5 2008-Jul-01 03:42:10 LOG2 log_preferences: prefs(displayformat) = short 2008-Jul-01 03:42:10 LOG2 log_preferences: prefs(logformat) = new 2008-Jul-01 03:42:10 LOG2 log_preferences: prefs(fontsize) = 4 2008-Jul-01 03:42:10 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2008-Jul-01 03:42:10 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2048 2008-Jul-01 03:42:10 ALERT executive: CIMA executive ready 2008-Jul-01 03:42:11 NOTE frontend: CIMA frontend ready 2008-Jul-01 03:42:13 LOG4 got_cormsg: From DATATAKING: vw% setup 2008-Jul-01 03:42:15 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2008-Jul-01 03:42:15 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2008-Jul-01 03:42:15 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2008-Jul-01 03:42:15 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2008-Jul-01 03:42:15 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Jul-01 03:42:15 NOTE select_receiver: Starting to select receiver ALFA 2008-Jul-01 03:42:15 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Jul-01 03:42:15 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Jul-01 03:42:15 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Jul-01 03:42:15 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Jul-01 03:42:15 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Jul-01 03:42:15 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Jul-01 03:42:15 DONE finish_task: DONE finished selecting: receiver ALFA 2008-Jul-01 03:42:15 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Jul-01 03:42:15 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Jul-01 03:42:15 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Jul-01 03:42:20 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0x300002 2008-Jul-01 03:42:20 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0x300002' 2008-Jul-01 03:42:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-01 03:42:20 LOG4 got_cormsg: From DATATAKING: io 2008-Jul-01 03:42:20 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2008-Jul-01 03:42:20 LOG4 got_cormsg: From DATATAKING: 2008-Jul-01 03:42:20 LOG4 got_cormsg: From DATATAKING: vw% tape stat 2008-Jul-01 03:42:20 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2008-Jul-01 03:42:20 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2008-Jul-01 03:42:20 LOG4 got_cormsg: From DATATAKING: vw% connectall 2008-Jul-01 03:42:20 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2008-Jul-01 03:42:20 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2008-Jul-01 03:42:20 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2008-Jul-01 03:42:20 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2008-Jul-01 03:42:20 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2008-Jul-01 03:42:20 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2008-Jul-01 03:42:20 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2008-Jul-01 03:42:20 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2008-Jul-01 03:42:20 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2048 2008-Jul-01 03:42:20 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Jul-01 03:42:20 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Jul-01 03:42:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-01 03:42:20 LOG4 got_cormsg: From DATATAKING: 2008-Jul-01 03:42:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-01 03:42:27 LOG4 got_cormsg: From DATATAKING: waiting for turret position:26.64 2008-Jul-01 03:44:08 INFO1 CIMA-run_command_file: Transferring command file '080601.cmd ' to executive ... 2008-Jul-01 03:44:08 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 3 {LOAD ages_config.conf} 2008-Jul-01 03:44:08 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 4 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5} 2008-Jul-01 03:44:08 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 5 {CATALOG AGESFull.cat} 2008-Jul-01 03:44:08 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {IF LSTSLEW(AGES7448_p1_088) < 220726 THEN} 2008-Jul-01 03:44:08 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {FIXEDDRIFT az=282.05 alfaangle=-88.5 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p1_088 ra=225000.00 dec=154830.00} 2008-Jul-01 03:44:08 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 12 {ENDIF} 2008-Jul-01 03:44:08 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 15 {IF LSTSLEW(AGES7448_p1_090) < 223026 THEN} 2008-Jul-01 03:44:08 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 16 {FIXEDDRIFT az=297.34 alfaangle=76.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p1_090 ra=225000.00 dec=154530.00} 2008-Jul-01 03:44:08 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 19 {ENDIF} 2008-Jul-01 03:44:08 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 22 {IF LSTSLEW(AGES7448_p1_092) < 225526 THEN} 2008-Jul-01 03:44:08 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 23 {FIXEDDRIFT az=24.86 alfaangle=-2.2 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p1_092 ra=225000.00 dec=154230.00} 2008-Jul-01 03:44:08 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 26 {ENDIF} 2008-Jul-01 03:44:08 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 29 {IF LSTSLEW(AGES7448_p1_094) < 231826 THEN} 2008-Jul-01 03:44:08 LOG4 exec_msg: From OBSERVER: store_command_file_line 14 30 {FIXEDDRIFT az=69.45 alfaangle=-45.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p1_094 ra=225000.00 dec=153930.00} 2008-Jul-01 03:44:08 LOG4 exec_msg: From OBSERVER: store_command_file_line 15 33 {ENDIF} 2008-Jul-01 03:44:08 LOG4 exec_msg: From OBSERVER: store_command_file_line 16 36 {IF LSTSLEW(AGES7448_p1_096) < 234126 THEN} 2008-Jul-01 03:44:08 LOG4 exec_msg: From OBSERVER: store_command_file_line 17 37 {FIXEDDRIFT az=79.43 alfaangle=-54.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p1_096 ra=225000.00 dec=153630.00} 2008-Jul-01 03:44:08 LOG4 exec_msg: From OBSERVER: store_command_file_line 18 40 {ENDIF} 2008-Jul-01 03:44:08 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-Jul-01 03:44:08 LOG4 exec_msg: From OBSERVER: run_command_file 080601.cmd 1 1 18 2008-Jul-01 03:44:08 LOG4 run_command_file: Calling 'run_command_file 080601.cmd 1 1 18' 2008-Jul-01 03:44:08 BEGIN begin_task: Starting task 'running command file '080601.cmd'' 2008-Jul-01 03:44:08 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Jul-01 03:44:08 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '080601.cmd' ...} 2008-Jul-01 03:44:09 NOTE run_command_file: Starting execution of command file '080601.cmd' from line 1 2008-Jul-01 03:44:09 COMMAND run_command_line: EXECUTING command 3: 'LOAD ages_config.conf' 2008-Jul-01 03:44:09 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2008-Jul-01 03:44:09 NOTE CIMA-check_config_file: File 'ages_config.conf' contains an ALFA set-up which will be ignored! 2008-Jul-01 03:44:09 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Jul-01 03:44:09 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2008-Jul-01 03:44:09 NOTE CIMA-load_config_file: Loading configuration file 'ages_config.conf' 2008-Jul-01 03:44:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Jul-01 03:44:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Jul-01 03:44:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Jul-01 03:44:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Jul-01 03:44:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Jul-01 03:44:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2008-Jul-01 03:44:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Jul-01 03:44:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786" 2008-Jul-01 03:44:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786" 2008-Jul-01 03:44:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786" 2008-Jul-01 03:44:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786" 2008-Jul-01 03:44:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786" 2008-Jul-01 03:44:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786" 2008-Jul-01 03:44:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786" 2008-Jul-01 03:44:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786" 2008-Jul-01 03:44:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786" 2008-Jul-01 03:44:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Jul-01 03:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Jul-01 03:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Jul-01 03:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Jul-01 03:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Jul-01 03:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Jul-01 03:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Jul-01 03:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Jul-01 03:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Jul-01 03:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Jul-01 03:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Jul-01 03:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Jul-01 03:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Jul-01 03:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2008-Jul-01 03:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Jul-01 03:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Jul-01 03:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Jul-01 03:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Jul-01 03:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Jul-01 03:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Jul-01 03:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Jul-01 03:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Jul-01 03:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Jul-01 03:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1670.405752" 2008-Jul-01 03:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Jul-01 03:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Jul-01 03:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Jul-01 03:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Jul-01 03:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Jul-01 03:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Jul-01 03:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Jul-01 03:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Jul-01 03:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Jul-01 03:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Jul-01 03:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Jul-01 03:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Jul-01 03:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Jul-01 03:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Jul-01 03:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Jul-01 03:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Jul-01 03:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Jul-01 03:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Jul-01 03:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Jul-01 03:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Jul-01 03:44:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Jul-01 03:44:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Jul-01 03:44:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Jul-01 03:44:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Jul-01 03:44:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Jul-01 03:44:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Jul-01 03:44:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Jul-01 03:44:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Jul-01 03:44:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Jul-01 03:44:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Jul-01 03:44:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Jul-01 03:44:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Jul-01 03:44:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Jul-01 03:44:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Jul-01 03:44:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Jul-01 03:44:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Jul-01 03:44:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Jul-01 03:44:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Jul-01 03:44:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Jul-01 03:44:11 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Jul-01 03:44:11 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Jul-01 03:44:11 LOG5 begin_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2008-Jul-01 03:44:11 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Jul-01 03:44:11 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Jul-01 03:44:11 INFO1 config_iflo: Selecting receiver ALFA 2008-Jul-01 03:44:11 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2008-Jul-01 03:44:11 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2008-Jul-01 03:44:11 START begin_task: Starting task 'selecting receiver ALFA' 2008-Jul-01 03:44:11 LOG5 begin_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2008-Jul-01 03:44:11 NOTE select_receiver: Starting to select receiver ALFA 2008-Jul-01 03:44:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Jul-01 03:44:11 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Jul-01 03:44:11 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Jul-01 03:44:11 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Jul-01 03:44:11 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Jul-01 03:44:11 LOG5 finish_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2008-Jul-01 03:44:11 INFO2 finish_task: DONE finished selecting: receiver ALFA 2008-Jul-01 03:44:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-01 03:44:11 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Jul-01 03:44:11 LOG5 end_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2008-Jul-01 03:44:11 START begin_task: Starting task 'waiting for receiver ALFA' 2008-Jul-01 03:44:11 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Jul-01 03:44:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 37.1 BITMAP stat_alfa_rot INFO {Waiting on rotating floor} 2008-Jul-01 03:44:11 START begin_task: Starting task 'waiting on waiting for receiver rotation' 2008-Jul-01 03:44:11 LOG5 begin_task: Level: (4) ID = <10006> Status = 0 0 0 0 ok 2008-Jul-01 03:44:11 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Jul-01 03:44:11 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Jul-01 03:44:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-01 03:44:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-01 03:44:43 STOP end_task: Finishing task 'waiting on waiting for receiver rotation' with status 'OK' 2008-Jul-01 03:44:43 LOG5 end_task: Level: (4) ID = <10006> Status = 0 0 0 0 ok 2008-Jul-01 03:44:43 LOG4 send_obs_status: To obs_status: <0> TASKWAIT 2008-Jul-01 03:44:44 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2008-Jul-01 03:44:44 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Jul-01 03:44:44 INFO1 config_iflo: Configuring rest of the IF/LO path 2008-Jul-01 03:44:44 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2008-Jul-01 03:44:44 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jul-01 03:44:44 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Jul-01 03:44:44 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jul-01 03:44:44 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2008-Jul-01 03:44:44 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jul-01 03:44:44 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jul-01 03:44:44 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2008-Jul-01 03:44:44 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jul-01 03:44:44 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Jul-01 03:44:44 LOG3 vw_send: To DATATAKING: alfafb 1 2008-Jul-01 03:44:44 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2008-Jul-01 03:44:44 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Jul-01 03:44:44 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Jul-01 03:44:44 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2008-Jul-01 03:44:44 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2008-Jul-01 03:44:44 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2008-Jul-01 03:44:44 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1670405752.0} 2008-Jul-01 03:44:44 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2008-Jul-01 03:44:44 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2008-Jul-01 03:44:44 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Jul-01 03:44:44 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Jul-01 03:44:44 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Jul-01 03:44:44 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Jul-01 03:44:44 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Jul-01 03:44:44 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2008-Jul-01 03:44:44 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2008-Jul-01 03:44:44 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2008-Jul-01 03:44:44 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2008-Jul-01 03:44:44 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Jul-01 03:44:44 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2008-Jul-01 03:44:44 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Jul-01 03:44:44 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Jul-01 03:44:44 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-01 03:44:44 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Jul-01 03:44:44 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2008-Jul-01 03:44:44 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Jul-01 03:44:44 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2008-Jul-01 03:44:44 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2008-Jul-01 03:44:44 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Jul-01 03:44:44 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jul-01 03:44:44 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Jul-01 03:44:44 LOG5 begin_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2008-Jul-01 03:44:44 LOG4 got_cormsg: From DATATAKING: alfafb 1 2008-Jul-01 03:44:44 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2008-Jul-01 03:44:44 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2008-Jul-01 03:44:44 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2008-Jul-01 03:44:44 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2008-Jul-01 03:44:44 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1670405752.0} 2008-Jul-01 03:44:44 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2008-Jul-01 03:44:44 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2008-Jul-01 03:44:44 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2008-Jul-01 03:44:44 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2008-Jul-01 03:44:44 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2008-Jul-01 03:44:44 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2008-Jul-01 03:44:44 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Jul-01 03:44:44 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2008-Jul-01 03:44:44 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Jul-01 03:44:44 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-01 03:44:44 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Jul-01 03:44:44 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2008-Jul-01 03:44:44 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2008-Jul-01 03:44:44 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2008-Jul-01 03:44:44 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jul-01 03:44:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-01 03:44:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-01 03:44:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-01 03:44:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-01 03:44:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-01 03:44:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-01 03:44:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-01 03:44:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-01 03:44:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-01 03:44:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-01 03:44:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-01 03:44:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-01 03:44:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-01 03:44:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-01 03:44:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-01 03:44:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-01 03:44:57 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-01 03:44:57 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-01 03:44:57 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-01 03:44:57 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-01 03:44:57 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-01 03:44:57 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-01 03:44:57 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jul-01 03:44:57 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Jul-01 03:44:57 LOG5 end_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2008-Jul-01 03:44:57 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Jul-01 03:44:57 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Jul-01 03:44:57 LOG5 finish_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2008-Jul-01 03:44:57 DONE finish_task: DONE finished configuration: IF/LO path 2008-Jul-01 03:44:57 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Jul-01 03:44:58 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Jul-01 03:44:58 LOG5 end_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2008-Jul-01 03:44:58 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Jul-01 03:44:58 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Jul-01 03:44:58 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Jul-01 03:44:58 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Jul-01 03:44:58 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2008-Jul-01 03:44:58 START begin_task: Starting task 'selecting calibration port' 2008-Jul-01 03:44:58 LOG5 begin_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-Jul-01 03:44:58 LOG3 vw_send: To DATATAKING: calport 3 2008-Jul-01 03:44:58 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Jul-01 03:44:58 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jul-01 03:44:58 START begin_task: Starting task 'waiting on calport' 2008-Jul-01 03:44:58 LOG5 begin_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2008-Jul-01 03:44:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-01 03:44:58 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Jul-01 03:44:58 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jul-01 03:44:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-01 03:44:58 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jul-01 03:44:58 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Jul-01 03:44:58 LOG5 end_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2008-Jul-01 03:44:58 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Jul-01 03:44:58 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Jul-01 03:44:58 LOG5 end_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-Jul-01 03:44:58 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Jul-01 03:44:58 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Jul-01 03:44:58 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jul-01 03:44:58 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2008-Jul-01 03:44:58 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jul-01 03:44:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-01 03:44:58 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jul-01 03:44:58 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jul-01 03:44:58 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jul-01 03:44:58 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2008-Jul-01 03:44:58 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Jul-01 03:44:58 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Jul-01 03:44:58 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Jul-01 03:44:58 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Jul-01 03:44:58 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Jul-01 03:44:58 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Jul-01 03:44:58 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Jul-01 03:44:58 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Jul-01 03:44:58 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Minchin 2008-Jul-01 03:44:58 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Minchin 2008-Jul-01 03:44:58 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Minchin 2008-Jul-01 03:44:58 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Minchin 2008-Jul-01 03:44:58 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Jul-01 03:44:58 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Jul-01 03:44:58 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jul-01 03:44:58 LOG5 begin_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2008-Jul-01 03:44:58 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jul-01 03:44:58 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jul-01 03:44:59 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jul-01 03:44:59 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jul-01 03:44:59 LOG5 end_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2008-Jul-01 03:44:59 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Minchin 2008-Jul-01 03:44:59 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Minchin 2008-Jul-01 03:44:59 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Minchin 2008-Jul-01 03:44:59 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Minchin 2008-Jul-01 03:44:59 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Jul-01 03:44:59 LOG5 finish_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Jul-01 03:44:59 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Jul-01 03:44:59 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Jul-01 03:44:59 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Jul-01 03:44:59 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Jul-01 03:44:59 COMMAND run_command_line: EXECUTING command 4: 'SETUP FIXEDDRIFT calwhen=tracking calsecs=5' 2008-Jul-01 03:44:59 COMMAND run_command_line: EXECUTING command 5: 'CATALOG AGESFull.cat' 2008-Jul-01 03:44:59 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2008-Jul-01 03:44:59 COMMAND run_command_line: EXECUTING command 8: 'IF LSTSLEW(AGES7448_p1_088) < 220726 THEN' 2008-Jul-01 03:45:00 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES7448_p1_088) < 220726 2008-Jul-01 03:45:00 INFO5 is_if_valid: Condition parsed as: 21.991494333333332 < 22.123888888888889 2008-Jul-01 03:45:00 COMMAND run_command_line: EXECUTING command 9: 'FIXEDDRIFT az=282.05 alfaangle=-88.5 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p1_088 ra=225000.00 dec=154830.00' 2008-Jul-01 03:45:00 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Jul-01 03:45:00 NOTE WAPPDATA-new_file: New FITS file: wapp.20080701.a2048.0000.fits 2008-Jul-01 03:45:00 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Minchin' 2008-Jul-01 03:45:00 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Jul-01 03:45:00 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Jul-01 03:45:00 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20080701.a2048.0000.fits} 2008-Jul-01 03:45:00 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Minchin' 2008-Jul-01 03:45:00 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Jul-01 03:45:00 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 282.05 -88.5 hcorcal 5 tracking no first 1 AGES7448_p1_088 225000.00 154830.00 J 8500.0 Heliocentric velocity(optical)' 2008-Jul-01 03:45:00 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Jul-01 03:45:00 LOG5 begin_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2008-Jul-01 03:45:00 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'B2210+016' 2008-Jul-01 03:45:00 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Jul-01 03:45:00 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES7448_p1_088} 2008-Jul-01 03:45:00 INFO3 fixed_driftmap: Sending telescope to Az = 282.05 and ZA = 10.57 2008-Jul-01 03:45:01 LOG3 track_source: Calling 'track_source AGES7448_p1_088 282.05 10.5745592820 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Jul-01 03:45:01 START begin_task: Starting task 'sending tracking commands' 2008-Jul-01 03:45:01 LOG5 begin_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2008-Jul-01 03:45:01 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7448_p1_088} INFO {Slewing to source 'AGES7448_p1_088' ...} 2008-Jul-01 03:45:01 INFO1 track_source: Starting to track AGES7448_p1_088 2008-Jul-01 03:45:01 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7448_p1_088" 2008-Jul-01 03:45:01 LOG3 vw_send: To DATATAKING: set ra 282.05 2008-Jul-01 03:45:01 LOG3 vw_send: To DATATAKING: set dec 10.5745592820 2008-Jul-01 03:45:01 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Jul-01 03:45:01 LOG3 vw_send: To DATATAKING: pnt tr 282.05 10.5745592820 -CF 2008-Jul-01 03:45:01 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Jul-01 03:45:01 STOP finish_task: Finishing task 'sending tracking commands' 2008-Jul-01 03:45:01 LOG5 finish_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2008-Jul-01 03:45:01 INFO2 finish_task: DONE finished sending: tracking commands 2008-Jul-01 03:45:01 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-01 03:45:01 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Jul-01 03:45:01 LOG5 end_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2008-Jul-01 03:45:01 START begin_task: Starting task 'rotate ALFA to -88.5 degrees' 2008-Jul-01 03:45:01 LOG5 begin_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2008-Jul-01 03:45:01 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -88.5 degrees ...} 2008-Jul-01 03:45:01 INFO2 rotate_alfa: ALFA commanded to -88.5 degrees 2008-Jul-01 03:45:01 LOG3 sock_errsend: To ALFAMOTOR: POSITION -88.5 REPLY 2008-Jul-01 03:45:01 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Jul-01 03:45:01 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Jul-01 03:45:01 LOG5 begin_task: Level: (4) ID = <10017> Status = 0 0 0 0 ok 2008-Jul-01 03:45:01 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7448_p1_088" 2008-Jul-01 03:45:01 LOG4 got_cormsg: From DATATAKING: set ra 282.05 2008-Jul-01 03:45:01 LOG4 got_cormsg: From DATATAKING: set dec 10.5745592820 2008-Jul-01 03:45:01 LOG4 got_cormsg: From DATATAKING: vw% 282.05 2008-Jul-01 03:45:01 LOG4 got_cormsg: From DATATAKING: vw% 10.5745592820 2008-Jul-01 03:45:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-01 03:45:01 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Jul-01 03:45:01 LOG4 got_cormsg: From DATATAKING: pnt tr 282.05 10.5745592820 -CF 2008-Jul-01 03:45:01 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Jul-01 03:45:01 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Jul-01 03:45:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-01 03:45:53 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Jul-01 03:45:53 INFO3 alfa_motor: ALFA rotator in-position -88.50 degrees 2008-Jul-01 03:45:53 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Jul-01 03:45:53 LOG5 end_task: Level: (4) ID = <10017> Status = 0 0 0 0 ok 2008-Jul-01 03:45:53 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Jul-01 03:45:53 STOP finish_task: Finishing task 'rotate ALFA to -88.5 degrees' 2008-Jul-01 03:45:53 LOG5 finish_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2008-Jul-01 03:45:53 INFO2 finish_task: DONE finished configuration: rotating ALFA to -88.5 degrees 2008-Jul-01 03:45:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-01 03:45:53 STOP end_task: Finishing task 'rotate ALFA to -88.5 degrees' with status 'OK' 2008-Jul-01 03:45:53 LOG5 end_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2008-Jul-01 03:45:53 START begin_task: Starting task 'waiting on telescope' 2008-Jul-01 03:45:53 LOG5 begin_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2008-Jul-01 03:45:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Jul-01 03:45:53 LOG3 waittrk: Start waittrk 5 2008-Jul-01 03:45:53 START begin_task: Starting task 'waiting on telescope movement' 2008-Jul-01 03:45:53 LOG5 begin_task: Level: (4) ID = <10019> Status = 0 0 0 0 ok 2008-Jul-01 03:45:58 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Jul-01 03:45:58 LOG5 end_task: Level: (4) ID = <10019> Status = 0 0 0 0 ok 2008-Jul-01 03:45:58 START begin_task: Starting task 'waiting on telescope on source' 2008-Jul-01 03:45:58 LOG5 begin_task: Level: (4) ID = <10020> Status = 0 0 0 0 ok 2008-Jul-01 03:47:49 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Jul-01 03:47:49 LOG5 end_task: Level: (4) ID = <10020> Status = 0 0 0 0 ok 2008-Jul-01 03:47:49 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Jul-01 03:47:49 INFO2 waittrk: Now tracking AGES7448_p1_088 2008-Jul-01 03:47:50 LOG4 waittrk: Current telescope position: Az = 281.62 ZA = 10.57 2008-Jul-01 03:47:50 STOP finish_task: Finishing task 'waiting on telescope' 2008-Jul-01 03:47:50 LOG5 finish_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2008-Jul-01 03:47:50 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Jul-01 03:47:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-01 03:47:50 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Jul-01 03:47:50 LOG5 end_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2008-Jul-01 03:47:50 START begin_task: Starting task 'selecting calibration type' 2008-Jul-01 03:47:50 LOG5 begin_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2008-Jul-01 03:47:50 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Jul-01 03:47:50 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Jul-01 03:47:50 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jul-01 03:47:50 START begin_task: Starting task 'waiting on setcal' 2008-Jul-01 03:47:50 LOG5 begin_task: Level: (4) ID = <10022> Status = 0 0 0 0 ok 2008-Jul-01 03:47:50 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Jul-01 03:47:50 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jul-01 03:47:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-01 03:47:50 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jul-01 03:47:50 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Jul-01 03:47:50 LOG5 end_task: Level: (4) ID = <10022> Status = 0 0 0 0 ok 2008-Jul-01 03:47:50 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Jul-01 03:47:50 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jul-01 03:47:50 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Jul-01 03:47:50 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jul-01 03:47:50 LOG5 begin_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2008-Jul-01 03:47:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-01 03:47:50 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jul-01 03:47:50 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jul-01 03:47:50 LOG5 end_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2008-Jul-01 03:47:50 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jul-01 03:47:50 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Jul-01 03:47:50 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jul-01 03:47:50 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Jul-01 03:47:50 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jul-01 03:47:50 LOG5 begin_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2008-Jul-01 03:47:50 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jul-01 03:47:50 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jul-01 03:47:50 LOG5 end_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2008-Jul-01 03:47:50 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jul-01 03:47:50 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Jul-01 03:47:50 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Jul-01 03:47:50 LOG5 end_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2008-Jul-01 03:47:50 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2008-Jul-01 03:47:50 INFO2 astwait: Waiting for 399 seconds from 07:47:50 to 07:54:29 UTC ... 2008-Jul-01 03:47:50 LOG4 send_obs_status: To obs_status: <1> TASKTIME 399 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Jul-01 03:47:50 START begin_task: Starting task 'waiting on waiting for AST time' 2008-Jul-01 03:47:50 LOG5 begin_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2008-Jul-01 03:54:29 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2008-Jul-01 03:54:29 LOG5 end_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2008-Jul-01 03:54:29 INFO3 astwait: Finished waiting 2008-Jul-01 03:54:29 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Jul-01 03:54:29 LOG5 dopset_later: Calling 'dopset_later 60.655822470011898' 2008-Jul-01 03:54:29 INFO3 dopset_later: Setting Doppler correction for 03:55:29 (60.7 seconds from now) 2008-Jul-01 03:54:29 LOG5 antvel: Calling 'antvel 282.050000 10.574559 F 60.655822470011898' 2008-Jul-01 03:54:29 LOG2 antvel: Transforming current Az = 282.05 ZA = 10.57 to apparent RA = 22:50:26.2 Dec = +15:51:11.5 2008-Jul-01 03:54:29 LOG2 antvel: Parameters to Doppler: Heliocentric 28529 2008 183 0.0 2008-Jul-01 03:54:29 INFO5 antvel: Computed antenna velocity: -25.81422 km/s 2008-Jul-01 03:54:29 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-25.8142248425 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Jul-01 03:54:29 INFO4 dopset_gen: New sky frequencies: 1381.362374 1381.362374 1381.362374 1381.362374 1381.362374 1381.362374 1381.362374 1381.362374 1381.362374 2008-Jul-01 03:54:29 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.362374 sky0=1381.362374 sky1=1381.362374 sky2=1381.362374 sky3=1381.362374 sky4=1381.362374 sky5=1381.362374 sky6=1381.362374 sky7=1381.362374 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jul-01 03:54:29 LOG2 dopset_gen: Result from 'sky2syn': 1631.362374 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jul-01 03:54:29 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631362374.0} 2008-Jul-01 03:54:29 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-01 03:54:29 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Jul-01 03:54:29 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Jul-01 03:54:29 INFO5 fixed_driftmap: Tracking J2000 position: RA = 22:49:03.4 Dec = +15:48:29.2 2008-Jul-01 03:54:29 LOG3 track_source: Calling 'track_source AGES7448_p1_088 224903.4 154829.2 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Jul-01 03:54:29 START begin_task: Starting task 'sending tracking commands' 2008-Jul-01 03:54:29 LOG5 begin_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-Jul-01 03:54:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7448_p1_088} INFO {Slewing to source 'AGES7448_p1_088' ...} 2008-Jul-01 03:54:29 INFO1 track_source: Starting to track AGES7448_p1_088 2008-Jul-01 03:54:29 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7448_p1_088" 2008-Jul-01 03:54:29 LOG3 vw_send: To DATATAKING: set ra 224903.4 2008-Jul-01 03:54:29 LOG3 vw_send: To DATATAKING: set dec 154829.2 2008-Jul-01 03:54:29 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Jul-01 03:54:29 LOG3 vw_send: To DATATAKING: pnt tr 224903.4 154829.2 -CJ 2008-Jul-01 03:54:29 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Jul-01 03:54:29 STOP finish_task: Finishing task 'sending tracking commands' 2008-Jul-01 03:54:29 LOG5 finish_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-Jul-01 03:54:29 INFO2 finish_task: DONE finished sending: tracking commands 2008-Jul-01 03:54:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-01 03:54:29 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Jul-01 03:54:29 LOG5 end_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-Jul-01 03:54:29 START begin_task: Starting task 'waiting on telescope' 2008-Jul-01 03:54:29 LOG5 begin_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2008-Jul-01 03:54:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Jul-01 03:54:29 LOG3 waittrk: Start waittrk 5 2008-Jul-01 03:54:29 START begin_task: Starting task 'waiting on telescope movement' 2008-Jul-01 03:54:29 LOG5 begin_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2008-Jul-01 03:54:29 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631362374.0} 2008-Jul-01 03:54:29 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jul-01 03:54:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-01 03:54:29 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7448_p1_088" 2008-Jul-01 03:54:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-01 03:54:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-01 03:54:29 LOG4 got_cormsg: From DATATAKING: set ra 224903.4 2008-Jul-01 03:54:29 LOG4 got_cormsg: From DATATAKING: set dec 154829.2 2008-Jul-01 03:54:29 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Jul-01 03:54:29 LOG4 got_cormsg: From DATATAKING: pnt tr 224903.4 154829.2 -CJ 2008-Jul-01 03:54:29 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Jul-01 03:54:29 LOG4 got_cormsg: From DATATAKING: 224903.4 2008-Jul-01 03:54:29 LOG4 got_cormsg: From DATATAKING: vw% 154829.2 2008-Jul-01 03:54:29 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2008-Jul-01 03:54:34 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Jul-01 03:54:34 LOG5 end_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2008-Jul-01 03:54:34 START begin_task: Starting task 'waiting on telescope on source' 2008-Jul-01 03:54:34 LOG5 begin_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2008-Jul-01 03:54:36 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Jul-01 03:54:36 LOG5 end_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2008-Jul-01 03:54:36 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Jul-01 03:54:36 INFO2 waittrk: Now tracking AGES7448_p1_088 2008-Jul-01 03:54:36 LOG4 waittrk: Current telescope position: Az = 281.65 ZA = 10.55 2008-Jul-01 03:54:36 STOP finish_task: Finishing task 'waiting on telescope' 2008-Jul-01 03:54:36 LOG5 finish_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2008-Jul-01 03:54:36 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Jul-01 03:54:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-01 03:54:36 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Jul-01 03:54:36 LOG5 end_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2008-Jul-01 03:54:36 START begin_task: Starting task 'adjusting WAPP power' 2008-Jul-01 03:54:36 LOG5 begin_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2008-Jul-01 03:54:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Jul-01 03:54:36 INFO2 adjust_power: Starting to adjust WAPP power 2008-Jul-01 03:54:36 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Jul-01 03:54:36 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Jul-01 03:54:36 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jul-01 03:54:36 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Jul-01 03:54:36 LOG5 begin_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2008-Jul-01 03:54:36 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Jul-01 03:54:36 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jul-01 03:54:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-01 03:54:39 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jul-01 03:54:39 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Jul-01 03:54:39 LOG5 end_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2008-Jul-01 03:54:39 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Jul-01 03:54:39 START begin_task: Starting task 'adjusting WAPP power' 2008-Jul-01 03:54:39 LOG5 begin_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2008-Jul-01 03:54:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Jul-01 03:54:39 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Jul-01 03:54:39 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Jul-01 03:54:39 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Jul-01 03:54:39 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Jul-01 03:54:39 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Jul-01 03:54:39 LOG5 begin_task: Level: (5) ID = <10033> Status = 0 0 0 0 ok 2008-Jul-01 03:54:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-01 03:54:39 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Jul-01 03:54:40 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 0 dB --- beam 1: 7 6 dB 2008-Jul-01 03:54:40 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 2 dB --- beam 5: 6 5 dB 2008-Jul-01 03:54:40 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Jul-01 03:54:40 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 2 2 dB 2008-Jul-01 03:54:40 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Jul-01 03:54:40 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Jul-01 03:54:40 LOG5 end_task: Level: (5) ID = <10033> Status = 0 0 0 0 ok 2008-Jul-01 03:54:40 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.084 0.421 ALFA beam 1: 1.071 0.974 2008-Jul-01 03:54:40 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.907 0.933 ALFA beam 3: 0.963 1.001 2008-Jul-01 03:54:40 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.975 1.070 ALFA beam 5: 1.002 1.099 2008-Jul-01 03:54:40 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.959 0.891 ALFA beam 7: 1.054 0.991 2008-Jul-01 03:54:40 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Jul-01 03:54:40 LOG5 finish_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2008-Jul-01 03:54:40 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Jul-01 03:54:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-01 03:54:40 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Jul-01 03:54:40 LOG5 end_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2008-Jul-01 03:54:40 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Jul-01 03:54:40 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Jul-01 03:54:40 LOG5 finish_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2008-Jul-01 03:54:40 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Jul-01 03:54:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-01 03:54:40 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Jul-01 03:54:40 LOG5 end_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2008-Jul-01 03:54:40 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Minchin 2008-Jul-01 03:54:40 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Minchin 2008-Jul-01 03:54:40 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Minchin 2008-Jul-01 03:54:40 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Minchin 2008-Jul-01 03:54:40 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20080701.a2048.0000.fits' is empty! 2008-Jul-01 03:54:40 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Jul-01 03:54:40 START begin_task: Starting task 'WAPP calibration' 2008-Jul-01 03:54:40 LOG5 begin_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2008-Jul-01 03:54:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Jul-01 03:54:40 START begin_task: Starting task 'selecting calibration type' 2008-Jul-01 03:54:40 LOG5 begin_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2008-Jul-01 03:54:40 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Jul-01 03:54:40 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Jul-01 03:54:40 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jul-01 03:54:40 START begin_task: Starting task 'waiting on setcal' 2008-Jul-01 03:54:40 LOG5 begin_task: Level: (5) ID = <10036> Status = 0 0 0 0 ok 2008-Jul-01 03:54:40 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Minchin' 2008-Jul-01 03:54:40 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Jul-01 03:54:40 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jul-01 03:54:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-01 03:54:40 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jul-01 03:54:40 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Jul-01 03:54:40 LOG5 end_task: Level: (5) ID = <10036> Status = 0 0 0 0 ok 2008-Jul-01 03:54:40 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Jul-01 03:54:40 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jul-01 03:54:41 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Jul-01 03:54:41 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jul-01 03:54:41 LOG5 begin_task: Level: (5) ID = <10037> Status = 0 0 0 0 ok 2008-Jul-01 03:54:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-01 03:54:41 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jul-01 03:54:41 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jul-01 03:54:41 LOG5 end_task: Level: (5) ID = <10037> Status = 0 0 0 0 ok 2008-Jul-01 03:54:41 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jul-01 03:54:41 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Jul-01 03:54:41 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jul-01 03:54:41 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Jul-01 03:54:41 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jul-01 03:54:41 LOG5 begin_task: Level: (5) ID = <10038> Status = 0 0 0 0 ok 2008-Jul-01 03:54:41 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jul-01 03:54:41 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jul-01 03:54:41 LOG5 end_task: Level: (5) ID = <10038> Status = 0 0 0 0 ok 2008-Jul-01 03:54:41 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jul-01 03:54:41 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Jul-01 03:54:41 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Jul-01 03:54:41 LOG5 end_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2008-Jul-01 03:54:41 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Jul-01 03:54:41 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Jul-01 03:54:41 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Jul-01 03:54:41 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jul-01 03:54:41 LOG5 begin_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2008-Jul-01 03:54:41 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jul-01 03:54:41 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Jul-01 03:54:41 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jul-01 03:54:41 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jul-01 03:54:41 LOG5 end_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2008-Jul-01 03:54:41 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Jul-01 03:54:41 LOG4 take_data: Calling 'take_data 5 5 CAL ON -' 2008-Jul-01 03:54:41 START begin_task: Starting task 'WAPP spectral observation' 2008-Jul-01 03:54:41 LOG5 begin_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2008-Jul-01 03:54:41 LOG5 log_alfabeam: Parameters: 22.817611111111109 15.808111111111115 22.110549 2008.5014728940096 -88.500046 2008-Jul-01 03:54:41 LOG4 log_alfabeam: ALFABEAM 0 22.817611111111095 15.808111111111121 2008-Jul-01 03:54:41 LOG4 log_alfabeam: ALFABEAM 1 22.819517848738503 15.716916755334015 2008-Jul-01 03:54:41 LOG4 log_alfabeam: ALFABEAM 2 22.824692853478759 15.777649822613741 2008-Jul-01 03:54:41 LOG4 log_alfabeam: ALFABEAM 3 22.822749287723379 15.869056365121418 2008-Jul-01 03:54:41 LOG4 log_alfabeam: ALFABEAM 4 22.815648150053910 15.898720993750089 2008-Jul-01 03:54:41 LOG4 log_alfabeam: ALFABEAM 5 22.810526329424398 15.838474706652962 2008-Jul-01 03:54:41 LOG4 log_alfabeam: ALFABEAM 6 22.812452802725723 15.748075215003075 2008-Jul-01 03:54:41 INFO2 take_data: Starting WAPP scan: 818300001 2008-Jul-01 03:54:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Jul-01 03:54:42 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jul-01 03:54:42 LOG5 begin_task: Level: (5) ID = <10041> Status = 0 0 0 0 ok 2008-Jul-01 03:54:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jul-01 03:54:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.421 < 0.75)! 2008-Jul-01 03:54:42 LOG4 check_wapp_levels: WAPP-1 power levels: 1.084 0.421 1.071 0.974 2008-Jul-01 03:54:42 LOG4 check_wapp_levels: WAPP-2 power levels: 0.907 0.933 0.963 1.001 2008-Jul-01 03:54:42 LOG4 check_wapp_levels: WAPP-3 power levels: 0.975 1.070 1.002 1.099 2008-Jul-01 03:54:42 LOG4 check_wapp_levels: WAPP-4 power levels: 0.959 0.891 1.054 0.991 2008-Jul-01 03:54:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 28483.00 2008-Jul-01 03:54:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.362374 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jul-01 03:54:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.362374 MHz Flip = 1 Band = 0 Mixer = 1569.000000 MHz 2008-Jul-01 03:54:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.362374 MHz Flip = 1 Band = 0 Mixer = 1706.300000 MHz 2008-Jul-01 03:54:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.362374 MHz Flip = 1 Band = 0 Mixer = 1863.810000 MHz 2008-Jul-01 03:54:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.362374 MHz Flip = 1 Band = 0 Mixer = 1951.000000 MHz 2008-Jul-01 03:54:48 INFO5 check_wapp_levels: WAPP power levels are between 0.537 and 1.498 (still bad) 2008-Jul-01 03:54:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.362374 MHz Flip = 1 Band = 0 Mixer = 1049.016000 MHz 2008-Jul-01 03:54:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.362374 MHz Flip = 1 Band = 0 Mixer = 1186.305000 MHz 2008-Jul-01 03:54:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.362374 MHz Flip = 1 Band = 0 Mixer = 1343.801000 MHz 2008-Jul-01 03:54:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.362374 MHz Flip = 1 Band = 0 Mixer = 1430.984000 MHz 2008-Jul-01 03:54:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (499999966 != 499999965)! 2008-Jul-01 03:54:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (499999966 != 499999967)! 2008-Jul-01 03:54:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jul-01 03:54:48 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jul-01 03:54:48 LOG5 end_task: Level: (5) ID = <10041> Status = 0 0 0 0 ok 2008-Jul-01 03:54:48 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jul-01 03:54:48 LOG5 end_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2008-Jul-01 03:54:48 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Jul-01 03:54:48 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Jul-01 03:54:48 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Jul-01 03:54:48 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jul-01 03:54:48 LOG5 begin_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2008-Jul-01 03:54:48 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jul-01 03:54:48 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jul-01 03:54:48 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jul-01 03:54:48 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jul-01 03:54:48 LOG5 end_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2008-Jul-01 03:54:49 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Jul-01 03:54:49 LOG4 take_data: Calling 'take_data 5 5 CAL OFF -' 2008-Jul-01 03:54:49 START begin_task: Starting task 'WAPP spectral observation' 2008-Jul-01 03:54:49 LOG5 begin_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2008-Jul-01 03:54:49 LOG5 log_alfabeam: Parameters: 22.817611111111109 15.808111111111115 22.112499 2008.5014731158262 -88.500046 2008-Jul-01 03:54:49 LOG4 log_alfabeam: ALFABEAM 0 22.817611111111098 15.808111111111117 2008-Jul-01 03:54:49 LOG4 log_alfabeam: ALFABEAM 1 22.819514255258930 15.716900668582515 2008-Jul-01 03:54:49 LOG4 log_alfabeam: ALFABEAM 2 22.824691673819657 15.777592790721650 2008-Jul-01 03:54:49 LOG4 log_alfabeam: ALFABEAM 3 22.822751609867016 15.869016252886365 2008-Jul-01 03:54:49 LOG4 log_alfabeam: ALFABEAM 4 22.815651579970208 15.898736000151830 2008-Jul-01 03:54:49 LOG4 log_alfabeam: ALFABEAM 5 22.810527501260285 15.838531641379042 2008-Jul-01 03:54:49 LOG4 log_alfabeam: ALFABEAM 6 22.812450454826955 15.748117964067806 2008-Jul-01 03:54:49 INFO2 take_data: Starting WAPP scan: 818300002 2008-Jul-01 03:54:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Jul-01 03:54:49 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jul-01 03:54:49 LOG5 begin_task: Level: (5) ID = <10044> Status = 0 0 0 0 ok 2008-Jul-01 03:54:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jul-01 03:54:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 28490.00 2008-Jul-01 03:54:54 INFO5 check_wapp_levels: WAPP power levels are between 0.537 and 1.498 (still bad) 2008-Jul-01 03:54:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.362374 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jul-01 03:54:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.362374 MHz Flip = 1 Band = 0 Mixer = 1569.000000 MHz 2008-Jul-01 03:54:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.362374 MHz Flip = 1 Band = 0 Mixer = 1706.300000 MHz 2008-Jul-01 03:54:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.362374 MHz Flip = 1 Band = 0 Mixer = 1863.810000 MHz 2008-Jul-01 03:54:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.362374 MHz Flip = 1 Band = 0 Mixer = 1951.000000 MHz 2008-Jul-01 03:54:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.362374 MHz Flip = 1 Band = 0 Mixer = 1049.016000 MHz 2008-Jul-01 03:54:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.362374 MHz Flip = 1 Band = 0 Mixer = 1186.305000 MHz 2008-Jul-01 03:54:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.362374 MHz Flip = 1 Band = 0 Mixer = 1343.801000 MHz 2008-Jul-01 03:54:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.362374 MHz Flip = 1 Band = 0 Mixer = 1430.984000 MHz 2008-Jul-01 03:54:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (499999966 != 499999967)! 2008-Jul-01 03:54:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (499999966 != 499999967)! 2008-Jul-01 03:54:55 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Jul-01 03:54:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jul-01 03:54:55 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jul-01 03:54:55 LOG5 end_task: Level: (5) ID = <10044> Status = 0 0 0 0 ok 2008-Jul-01 03:54:55 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jul-01 03:54:55 LOG5 end_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2008-Jul-01 03:54:55 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Jul-01 03:54:55 STOP finish_task: Finishing task 'WAPP calibration' 2008-Jul-01 03:54:55 LOG5 finish_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2008-Jul-01 03:54:55 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Jul-01 03:54:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-01 03:54:55 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Jul-01 03:54:55 LOG5 end_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2008-Jul-01 03:54:55 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Jul-01 03:54:56 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 282.05 and ZA = 10.57 2008-Jul-01 03:54:56 LOG3 track_source: Calling 'track_source AGES7448_p1_088 282.05 10.5745592820 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Jul-01 03:54:56 START begin_task: Starting task 'sending tracking commands' 2008-Jul-01 03:54:56 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2008-Jul-01 03:54:56 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7448_p1_088} INFO {Slewing to source 'AGES7448_p1_088' ...} 2008-Jul-01 03:54:56 INFO1 track_source: Starting to track AGES7448_p1_088 2008-Jul-01 03:54:56 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7448_p1_088" 2008-Jul-01 03:54:56 LOG3 vw_send: To DATATAKING: set ra 282.05 2008-Jul-01 03:54:56 LOG3 vw_send: To DATATAKING: set dec 10.5745592820 2008-Jul-01 03:54:56 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Jul-01 03:54:56 LOG3 vw_send: To DATATAKING: pnt tr 282.05 10.5745592820 -CF 2008-Jul-01 03:54:56 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Jul-01 03:54:56 STOP finish_task: Finishing task 'sending tracking commands' 2008-Jul-01 03:54:56 LOG5 finish_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2008-Jul-01 03:54:56 INFO2 finish_task: DONE finished sending: tracking commands 2008-Jul-01 03:54:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jul-01 03:54:56 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Jul-01 03:54:56 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2008-Jul-01 03:54:56 LOG1 fixed_driftmap: Parameters: HA = -00:43:00.6 Start = 22:07:25.8 LST = 22:06:52.0 diff = 33.7 secs 2008-Jul-01 03:54:56 INFO2 fixed_driftmap: Waiting 31.7 seconds for RA 22:50:26 2008-Jul-01 03:54:56 INFO2 lstwait: Waiting for 31.7 secs from LST 22:06:52 to LST 22:07:24 ... 2008-Jul-01 03:54:56 LOG4 send_obs_status: To obs_status: <1> TASKTIME 31.659610488255971 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Jul-01 03:54:56 START begin_task: Starting task 'waiting on wait on LST' 2008-Jul-01 03:54:56 LOG5 begin_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2008-Jul-01 03:54:56 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7448_p1_088" 2008-Jul-01 03:54:56 LOG4 got_cormsg: From DATATAKING: set ra 282.05 2008-Jul-01 03:54:56 LOG4 got_cormsg: From DATATAKING: set dec 10.5745592820 2008-Jul-01 03:54:56 LOG4 got_cormsg: From DATATAKING: vw% 282.05 2008-Jul-01 03:54:56 LOG4 got_cormsg: From DATATAKING: vw% 10.5745592820 2008-Jul-01 03:54:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-01 03:54:56 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Jul-01 03:54:56 LOG4 got_cormsg: From DATATAKING: pnt tr 282.05 10.5745592820 -CF 2008-Jul-01 03:54:56 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Jul-01 03:54:56 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Jul-01 03:54:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jul-01 03:55:00 INFO5 check_wapp_levels: WAPP power levels are between 0.428 and 1.114 (still bad) 2008-Jul-01 03:55:28 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Jul-01 03:55:28 LOG5 end_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2008-Jul-01 03:55:28 LOG4 lstwait: Finished waiting 0.34 seconds late 2008-Jul-01 03:55:28 INFO3 lstwait: Finished waiting 2008-Jul-01 03:55:28 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Jul-01 03:55:28 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Jul-01 03:55:28 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Jul-01 03:55:28 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Jul-01 03:55:28 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Jul-01 03:55:28 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ -' 2008-Jul-01 03:55:28 START begin_task: Starting task 'WAPP spectral observation' 2008-Jul-01 03:55:28 LOG5 begin_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2008-Jul-01 03:55:28 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jul-01 03:55:28 INFO2 take_data: Starting WAPP scan: 818300003 2008-Jul-01 03:55:28 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Jul-01 03:55:28 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jul-01 03:55:28 LOG5 begin_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2008-Jul-01 03:55:28 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jul-01 03:55:28 INFO1 WAPP=1+2+3+4-start_spectra: start sec 28529.00 2008-Jul-01 03:55:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.362374 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jul-01 03:55:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.362374 MHz Flip = 1 Band = 0 Mixer = 1569.000000 MHz 2008-Jul-01 03:55:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.362374 MHz Flip = 1 Band = 0 Mixer = 1706.300000 MHz 2008-Jul-01 03:55:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.362374 MHz Flip = 1 Band = 0 Mixer = 1863.810000 MHz 2008-Jul-01 03:55:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.362374 MHz Flip = 1 Band = 0 Mixer = 1951.000000 MHz 2008-Jul-01 03:55:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.362374 MHz Flip = 1 Band = 0 Mixer = 1049.016000 MHz 2008-Jul-01 03:55:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.362374 MHz Flip = 1 Band = 0 Mixer = 1186.305000 MHz 2008-Jul-01 03:55:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.362374 MHz Flip = 1 Band = 0 Mixer = 1343.801000 MHz 2008-Jul-01 03:55:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.362374 MHz Flip = 1 Band = 0 Mixer = 1430.984000 MHz 2008-Jul-01 03:55:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:55:30 INFO5 check_wapp_levels: WAPP power levels are between 0.427 and 1.113 (still bad) 2008-Jul-01 03:55:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:55:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999965)! 2008-Jul-01 03:55:32 INFO5 check_wapp_levels: WAPP power levels are between 0.427 and 1.112 (still bad) 2008-Jul-01 03:55:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:55:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-01 03:55:34 INFO5 check_wapp_levels: WAPP power levels are between 0.428 and 1.112 (still bad) 2008-Jul-01 03:55:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-01 03:55:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-01 03:55:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Jul-01 03:55:36 INFO5 check_wapp_levels: WAPP power levels are between 0.427 and 1.113 (still bad) 2008-Jul-01 03:55:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:55:38 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999965)! 2008-Jul-01 03:55:38 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:55:38 INFO5 check_wapp_levels: WAPP power levels are between 0.427 and 1.112 (still bad) 2008-Jul-01 03:55:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:55:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:55:40 INFO5 check_wapp_levels: WAPP power levels are between 0.427 and 1.113 (still bad) 2008-Jul-01 03:55:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:55:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-01 03:55:42 INFO5 check_wapp_levels: WAPP power levels are between 0.426 and 1.113 (still bad) 2008-Jul-01 03:55:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:55:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-01 03:55:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Jul-01 03:55:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.427 < 0.75)! 2008-Jul-01 03:55:44 LOG4 check_wapp_levels: WAPP-1 power levels: 1.086 0.427 1.067 0.970 2008-Jul-01 03:55:44 LOG4 check_wapp_levels: WAPP-2 power levels: 0.919 0.930 0.963 1.016 2008-Jul-01 03:55:44 LOG4 check_wapp_levels: WAPP-3 power levels: 0.980 1.080 1.020 1.113 2008-Jul-01 03:55:44 LOG4 check_wapp_levels: WAPP-4 power levels: 0.966 0.908 1.057 1.000 2008-Jul-01 03:55:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999965)! 2008-Jul-01 03:55:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:55:46 INFO5 check_wapp_levels: WAPP power levels are between 0.427 and 1.113 (still bad) 2008-Jul-01 03:55:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:55:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:55:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:55:48 INFO5 check_wapp_levels: WAPP power levels are between 0.426 and 1.111 (still bad) 2008-Jul-01 03:55:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:55:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Jul-01 03:55:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:55:50 INFO5 check_wapp_levels: WAPP power levels are between 0.426 and 1.113 (still bad) 2008-Jul-01 03:55:51 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Jul-01 03:55:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999967)! 2008-Jul-01 03:55:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:55:53 INFO5 check_wapp_levels: WAPP power levels are between 0.426 and 1.112 (still bad) 2008-Jul-01 03:55:53 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Jul-01 03:55:53 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999965)! 2008-Jul-01 03:55:53 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-01 03:55:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-01 03:55:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Jul-01 03:55:55 INFO5 check_wapp_levels: WAPP power levels are between 0.426 and 1.112 (still bad) 2008-Jul-01 03:55:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:55:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Jul-01 03:55:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999965)! 2008-Jul-01 03:55:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:55:57 INFO5 check_wapp_levels: WAPP power levels are between 0.427 and 1.112 (still bad) 2008-Jul-01 03:55:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Jul-01 03:55:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999967)! 2008-Jul-01 03:55:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Jul-01 03:55:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999965)! 2008-Jul-01 03:55:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:55:59 INFO5 check_wapp_levels: WAPP power levels are between 0.427 and 1.111 (still bad) 2008-Jul-01 03:55:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:55:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:55:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-01 03:55:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Jul-01 03:56:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:56:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Jul-01 03:56:01 INFO5 check_wapp_levels: WAPP power levels are between 0.426 and 1.111 (still bad) 2008-Jul-01 03:56:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:56:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:56:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Jul-01 03:56:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:56:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-01 03:56:03 INFO5 check_wapp_levels: WAPP power levels are between 0.427 and 1.111 (still bad) 2008-Jul-01 03:56:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999967)! 2008-Jul-01 03:56:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Jul-01 03:56:04 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:56:04 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-01 03:56:05 INFO5 check_wapp_levels: WAPP power levels are between 0.426 and 1.112 (still bad) 2008-Jul-01 03:56:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:56:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Jul-01 03:56:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-01 03:56:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Jul-01 03:56:07 INFO5 check_wapp_levels: WAPP power levels are between 0.426 and 1.112 (still bad) 2008-Jul-01 03:56:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Jul-01 03:56:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:56:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Jul-01 03:56:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:56:09 INFO5 check_wapp_levels: WAPP power levels are between 0.426 and 1.111 (still bad) 2008-Jul-01 03:56:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Jul-01 03:56:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Jul-01 03:56:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:56:11 INFO5 check_wapp_levels: WAPP power levels are between 0.426 and 1.111 (still bad) 2008-Jul-01 03:56:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:56:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:56:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:56:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-01 03:56:13 INFO5 check_wapp_levels: WAPP power levels are between 0.427 and 1.111 (still bad) 2008-Jul-01 03:56:13 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:56:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999965)! 2008-Jul-01 03:56:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:56:15 INFO5 check_wapp_levels: WAPP power levels are between 0.426 and 1.110 (still bad) 2008-Jul-01 03:56:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:56:17 INFO5 check_wapp_levels: WAPP power levels are between 0.426 and 1.111 (still bad) 2008-Jul-01 03:56:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-01 03:56:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:56:19 INFO5 check_wapp_levels: WAPP power levels are between 0.426 and 1.111 (still bad) 2008-Jul-01 03:56:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:56:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-01 03:56:21 INFO5 check_wapp_levels: WAPP power levels are between 0.426 and 1.112 (still bad) 2008-Jul-01 03:56:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:56:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:56:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-01 03:56:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Jul-01 03:56:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:56:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:56:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Jul-01 03:56:23 INFO5 check_wapp_levels: WAPP power levels are between 0.427 and 1.111 (still bad) 2008-Jul-01 03:56:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 4 (99999966 != 99999967)! 2008-Jul-01 03:56:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999967)! 2008-Jul-01 03:56:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:56:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:56:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-01 03:56:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Jul-01 03:56:25 INFO5 check_wapp_levels: WAPP power levels are between 0.427 and 1.111 (still bad) 2008-Jul-01 03:56:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:56:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:56:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Jul-01 03:56:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:56:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:56:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Jul-01 03:56:27 INFO5 check_wapp_levels: WAPP power levels are between 0.426 and 1.111 (still bad) 2008-Jul-01 03:56:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:56:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:56:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-01 03:56:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Jul-01 03:56:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Jul-01 03:56:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Jul-01 03:56:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:56:29 INFO5 check_wapp_levels: WAPP power levels are between 0.427 and 1.110 (still bad) 2008-Jul-01 03:56:31 INFO5 check_wapp_levels: WAPP power levels are between 0.426 and 1.111 (still bad) 2008-Jul-01 03:56:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:56:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-01 03:56:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:56:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-01 03:56:33 INFO5 check_wapp_levels: WAPP power levels are between 0.426 and 1.109 (still bad) 2008-Jul-01 03:56:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:56:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:56:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:56:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:56:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-01 03:56:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Jul-01 03:56:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Jul-01 03:56:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999965)! 2008-Jul-01 03:56:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-01 03:56:35 INFO5 check_wapp_levels: WAPP power levels are between 0.427 and 1.110 (still bad) 2008-Jul-01 03:56:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Jul-01 03:56:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:56:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-01 03:56:37 INFO5 check_wapp_levels: WAPP power levels are between 0.426 and 1.112 (still bad) 2008-Jul-01 03:56:38 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:56:38 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-01 03:56:39 INFO5 check_wapp_levels: WAPP power levels are between 0.426 and 1.111 (still bad) 2008-Jul-01 03:56:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:56:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-01 03:56:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:56:41 INFO5 check_wapp_levels: WAPP power levels are between 0.425 and 1.112 (still bad) 2008-Jul-01 03:56:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:56:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Jul-01 03:56:43 INFO5 check_wapp_levels: WAPP power levels are between 0.426 and 1.113 (still bad) 2008-Jul-01 03:56:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:56:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:56:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-01 03:56:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:56:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-01 03:56:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Jul-01 03:56:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.426 < 0.75)! 2008-Jul-01 03:56:45 LOG4 check_wapp_levels: WAPP-1 power levels: 1.081 0.426 1.064 0.967 2008-Jul-01 03:56:45 LOG4 check_wapp_levels: WAPP-2 power levels: 0.918 0.928 0.962 1.015 2008-Jul-01 03:56:45 LOG4 check_wapp_levels: WAPP-3 power levels: 0.979 1.080 1.018 1.113 2008-Jul-01 03:56:45 LOG4 check_wapp_levels: WAPP-4 power levels: 0.963 0.906 1.054 0.998 2008-Jul-01 03:56:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Jul-01 03:56:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:56:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-01 03:56:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-01 03:56:47 INFO5 check_wapp_levels: WAPP power levels are between 0.426 and 1.112 (still bad) 2008-Jul-01 03:56:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Jul-01 03:56:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:56:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:56:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:56:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-01 03:56:49 INFO5 check_wapp_levels: WAPP power levels are between 0.426 and 1.112 (still bad) 2008-Jul-01 03:56:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:56:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:56:51 INFO5 check_wapp_levels: WAPP power levels are between 0.427 and 1.113 (still bad) 2008-Jul-01 03:56:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-01 03:56:53 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:56:53 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Jul-01 03:56:53 INFO5 check_wapp_levels: WAPP power levels are between 0.426 and 1.113 (still bad) 2008-Jul-01 03:56:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Jul-01 03:56:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:56:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:56:55 INFO5 check_wapp_levels: WAPP power levels are between 0.426 and 1.113 (still bad) 2008-Jul-01 03:56:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:56:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999965)! 2008-Jul-01 03:56:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-01 03:56:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999967)! 2008-Jul-01 03:56:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:56:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:56:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Jul-01 03:56:57 INFO5 check_wapp_levels: WAPP power levels are between 0.425 and 1.112 (still bad) 2008-Jul-01 03:56:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:56:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:56:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Jul-01 03:56:59 INFO5 check_wapp_levels: WAPP power levels are between 0.426 and 1.112 (still bad) 2008-Jul-01 03:57:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:57:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:57:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Jul-01 03:57:01 INFO5 check_wapp_levels: WAPP power levels are between 0.426 and 1.112 (still bad) 2008-Jul-01 03:57:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-01 03:57:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Jul-01 03:57:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:57:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Jul-01 03:57:03 INFO5 check_wapp_levels: WAPP power levels are between 0.425 and 1.112 (still bad) 2008-Jul-01 03:57:04 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Jul-01 03:57:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:57:05 INFO5 check_wapp_levels: WAPP power levels are between 0.426 and 1.112 (still bad) 2008-Jul-01 03:57:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:57:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:57:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Jul-01 03:57:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:57:07 INFO5 check_wapp_levels: WAPP power levels are between 0.427 and 1.113 (still bad) 2008-Jul-01 03:57:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:57:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:57:09 INFO5 check_wapp_levels: WAPP power levels are between 0.426 and 1.114 (still bad) 2008-Jul-01 03:57:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:57:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:57:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-01 03:57:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:57:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-01 03:57:11 INFO5 check_wapp_levels: WAPP power levels are between 0.426 and 1.114 (still bad) 2008-Jul-01 03:57:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999965)! 2008-Jul-01 03:57:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:57:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Jul-01 03:57:13 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:57:13 INFO5 check_wapp_levels: WAPP power levels are between 0.426 and 1.114 (still bad) 2008-Jul-01 03:57:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Jul-01 03:57:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:57:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:57:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Jul-01 03:57:16 INFO5 check_wapp_levels: WAPP power levels are between 0.426 and 1.114 (still bad) 2008-Jul-01 03:57:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:57:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Jul-01 03:57:18 INFO5 check_wapp_levels: WAPP power levels are between 0.425 and 1.115 (still bad) 2008-Jul-01 03:57:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999967)! 2008-Jul-01 03:57:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:57:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:57:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-01 03:57:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999967)! 2008-Jul-01 03:57:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:57:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-01 03:57:20 INFO5 check_wapp_levels: WAPP power levels are between 0.425 and 1.114 (still bad) 2008-Jul-01 03:57:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:57:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:57:22 INFO5 check_wapp_levels: WAPP power levels are between 0.425 and 1.113 (still bad) 2008-Jul-01 03:57:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:57:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999967)! 2008-Jul-01 03:57:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:57:24 INFO5 check_wapp_levels: WAPP power levels are between 0.425 and 1.114 (still bad) 2008-Jul-01 03:57:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:57:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:57:26 INFO5 check_wapp_levels: WAPP power levels are between 0.425 and 1.115 (still bad) 2008-Jul-01 03:57:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999965)! 2008-Jul-01 03:57:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Jul-01 03:57:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:57:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-01 03:57:28 INFO5 check_wapp_levels: WAPP power levels are between 0.426 and 1.114 (still bad) 2008-Jul-01 03:57:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-01 03:57:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-01 03:57:30 INFO5 check_wapp_levels: WAPP power levels are between 0.426 and 1.113 (still bad) 2008-Jul-01 03:57:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Jul-01 03:57:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:57:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-01 03:57:32 INFO5 check_wapp_levels: WAPP power levels are between 0.426 and 1.113 (still bad) 2008-Jul-01 03:57:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Jul-01 03:57:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Jul-01 03:57:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:57:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Jul-01 03:57:34 INFO5 check_wapp_levels: WAPP power levels are between 0.425 and 1.114 (still bad) 2008-Jul-01 03:57:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Jul-01 03:57:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:57:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:57:36 INFO5 check_wapp_levels: WAPP power levels are between 0.426 and 1.113 (still bad) 2008-Jul-01 03:57:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:57:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:57:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Jul-01 03:57:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:57:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Jul-01 03:57:38 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:57:38 INFO5 check_wapp_levels: WAPP power levels are between 0.425 and 1.114 (still bad) 2008-Jul-01 03:57:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:57:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-01 03:57:40 INFO5 check_wapp_levels: WAPP power levels are between 0.425 and 1.113 (still bad) 2008-Jul-01 03:57:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999965)! 2008-Jul-01 03:57:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-01 03:57:42 INFO5 check_wapp_levels: WAPP power levels are between 0.425 and 1.112 (still bad) 2008-Jul-01 03:57:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:57:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:57:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 4 (99999966 != 99999967)! 2008-Jul-01 03:57:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999965)! 2008-Jul-01 03:57:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:57:44 INFO5 check_wapp_levels: WAPP power levels are between 0.425 and 1.112 (still bad) 2008-Jul-01 03:57:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:57:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Jul-01 03:57:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.426 < 0.75)! 2008-Jul-01 03:57:46 LOG4 check_wapp_levels: WAPP-1 power levels: 1.087 0.426 1.062 0.966 2008-Jul-01 03:57:46 LOG4 check_wapp_levels: WAPP-2 power levels: 0.920 0.930 0.972 1.024 2008-Jul-01 03:57:46 LOG4 check_wapp_levels: WAPP-3 power levels: 0.982 1.084 1.020 1.113 2008-Jul-01 03:57:46 LOG4 check_wapp_levels: WAPP-4 power levels: 0.964 0.906 1.054 0.998 2008-Jul-01 03:57:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:57:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Jul-01 03:57:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:57:48 INFO5 check_wapp_levels: WAPP power levels are between 0.426 and 1.112 (still bad) 2008-Jul-01 03:57:50 INFO5 check_wapp_levels: WAPP power levels are between 0.426 and 1.112 (still bad) 2008-Jul-01 03:57:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:57:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Jul-01 03:57:51 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-01 03:57:51 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Jul-01 03:57:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-01 03:57:52 INFO5 check_wapp_levels: WAPP power levels are between 0.425 and 1.112 (still bad) 2008-Jul-01 03:57:54 INFO5 check_wapp_levels: WAPP power levels are between 0.425 and 1.112 (still bad) 2008-Jul-01 03:57:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:57:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:57:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-01 03:57:56 INFO5 check_wapp_levels: WAPP power levels are between 0.425 and 1.111 (still bad) 2008-Jul-01 03:57:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:57:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:57:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:57:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Jul-01 03:57:58 INFO5 check_wapp_levels: WAPP power levels are between 0.426 and 1.111 (still bad) 2008-Jul-01 03:57:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999965)! 2008-Jul-01 03:57:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:57:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-01 03:58:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:58:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:58:00 INFO5 check_wapp_levels: WAPP power levels are between 0.426 and 1.112 (still bad) 2008-Jul-01 03:58:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:58:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:58:02 INFO5 check_wapp_levels: WAPP power levels are between 0.424 and 1.112 (still bad) 2008-Jul-01 03:58:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999965)! 2008-Jul-01 03:58:04 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:58:04 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-01 03:58:04 INFO5 check_wapp_levels: WAPP power levels are between 0.426 and 1.111 (still bad) 2008-Jul-01 03:58:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:58:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Jul-01 03:58:06 INFO5 check_wapp_levels: WAPP power levels are between 0.426 and 1.112 (still bad) 2008-Jul-01 03:58:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999965)! 2008-Jul-01 03:58:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-01 03:58:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:58:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-01 03:58:08 INFO5 check_wapp_levels: WAPP power levels are between 0.425 and 1.111 (still bad) 2008-Jul-01 03:58:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:58:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-01 03:58:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999965)! 2008-Jul-01 03:58:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:58:10 INFO5 check_wapp_levels: WAPP power levels are between 0.425 and 1.111 (still bad) 2008-Jul-01 03:58:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-01 03:58:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:58:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:58:12 INFO5 check_wapp_levels: WAPP power levels are between 0.425 and 1.112 (still bad) 2008-Jul-01 03:58:13 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-01 03:58:13 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Jul-01 03:58:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 5 (99999966 != 99999964)! 2008-Jul-01 03:58:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:58:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:58:14 INFO5 check_wapp_levels: WAPP power levels are between 0.426 and 1.112 (still bad) 2008-Jul-01 03:58:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:58:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-01 03:58:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Jul-01 03:58:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:58:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-01 03:58:16 INFO5 check_wapp_levels: WAPP power levels are between 0.426 and 1.111 (still bad) 2008-Jul-01 03:58:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 4 (99999966 != 99999967)! 2008-Jul-01 03:58:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999967)! 2008-Jul-01 03:58:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:58:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Jul-01 03:58:18 INFO5 check_wapp_levels: WAPP power levels are between 0.425 and 1.112 (still bad) 2008-Jul-01 03:58:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 7 (99999966 != 99999964)! 2008-Jul-01 03:58:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-01 03:58:20 INFO5 check_wapp_levels: WAPP power levels are between 0.425 and 1.111 (still bad) 2008-Jul-01 03:58:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:58:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Jul-01 03:58:22 INFO5 check_wapp_levels: WAPP power levels are between 0.426 and 1.112 (still bad) 2008-Jul-01 03:58:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:58:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:58:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:58:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:58:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-01 03:58:24 INFO5 check_wapp_levels: WAPP power levels are between 0.425 and 1.112 (still bad) 2008-Jul-01 03:58:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:58:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:58:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:58:26 INFO5 check_wapp_levels: WAPP power levels are between 0.425 and 1.112 (still bad) 2008-Jul-01 03:58:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:58:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:58:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Jul-01 03:58:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-01 03:58:28 INFO5 check_wapp_levels: WAPP power levels are between 0.424 and 1.112 (still bad) 2008-Jul-01 03:58:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:58:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:58:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Jul-01 03:58:30 INFO5 check_wapp_levels: WAPP power levels are between 0.425 and 1.113 (still bad) 2008-Jul-01 03:58:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-01 03:58:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Jul-01 03:58:32 INFO5 check_wapp_levels: WAPP power levels are between 0.425 and 1.113 (still bad) 2008-Jul-01 03:58:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:58:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:58:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:58:34 INFO5 check_wapp_levels: WAPP power levels are between 0.425 and 1.113 (still bad) 2008-Jul-01 03:58:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999965)! 2008-Jul-01 03:58:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Jul-01 03:58:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:58:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Jul-01 03:58:37 INFO5 check_wapp_levels: WAPP power levels are between 0.425 and 1.113 (still bad) 2008-Jul-01 03:58:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:58:38 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999965)! 2008-Jul-01 03:58:39 INFO5 check_wapp_levels: WAPP power levels are between 0.425 and 1.114 (still bad) 2008-Jul-01 03:58:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Jul-01 03:58:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:58:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:58:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:58:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-01 03:58:41 INFO5 check_wapp_levels: WAPP power levels are between 0.425 and 1.113 (still bad) 2008-Jul-01 03:58:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:58:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-01 03:58:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Jul-01 03:58:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-01 03:58:43 INFO5 check_wapp_levels: WAPP power levels are between 0.425 and 1.115 (still bad) 2008-Jul-01 03:58:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Jul-01 03:58:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Jul-01 03:58:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Jul-01 03:58:45 INFO5 check_wapp_levels: WAPP power levels are between 0.426 and 1.115 (still bad) 2008-Jul-01 03:58:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 an