2008-May-29 19:01:33 BEGIN executive: CIMA executive starting ... 2008-May-29 19:01:33 NOTE executive: STARTING NEW CIMA SESSION 2008-May-29 19:01:33 INFO1 executive: Using CIMA version 2.3.xx 'unusable' from 2008-05-29 18:35 2008-May-29 19:01:33 INFO4 executive: This is an ON-LINE session 2008-May-29 19:01:33 INFO4 executive: This is a REMOTE session 2008-May-29 19:01:33 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2008-May-29 19:01:33 INFO1 executive: CIMA session for project 'a2048' in 'line' mode for 'SS&WvD' 2008-May-29 19:01:33 INFO2 executive: Logging to '/share/obs4/usr/a2048/a2048.cimalog_20080529' 2008-May-29 19:01:34 LOG2 log_preferences: Currently applied preferences: 2008-May-29 19:01:34 LOG2 log_preferences: prefs(dailylog) = daily 2008-May-29 19:01:34 LOG2 log_preferences: prefs(offlinelog) = skip 2008-May-29 19:01:34 LOG2 log_preferences: prefs(datawindow) = ignore 2008-May-29 19:01:34 LOG2 log_preferences: prefs(limitwarning) = enabled 2008-May-29 19:01:34 LOG2 log_preferences: prefs(wappfailure) = abort 2008-May-29 19:01:34 LOG2 log_preferences: prefs(helpstyle) = stay-open 2008-May-29 19:01:34 LOG2 log_preferences: prefs(logcolours) = full 2008-May-29 19:01:34 LOG2 log_preferences: prefs(displaylevel) = INFO3 2008-May-29 19:01:34 LOG2 log_preferences: prefs(loglevel) = LOG5 2008-May-29 19:01:34 LOG2 log_preferences: prefs(displayformat) = short 2008-May-29 19:01:34 LOG2 log_preferences: prefs(logformat) = new 2008-May-29 19:01:34 LOG2 log_preferences: prefs(fontsize) = 4 2008-May-29 19:01:34 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2008-May-29 19:01:34 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2048 2008-May-29 19:01:34 ALERT executive: CIMA executive ready 2008-May-29 19:01:37 NOTE frontend: CIMA frontend ready 2008-May-29 19:01:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-29 19:01:37 LOG4 got_cormsg: From DATATAKING: setup 2008-May-29 19:01:43 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0xd 2008-May-29 19:01:43 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0xd' 2008-May-29 19:01:43 LOG4 got_cormsg: From DATATAKING: vw% io 2008-May-29 19:01:43 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2008-May-29 19:01:43 LOG4 got_cormsg: From DATATAKING: 2008-May-29 19:01:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-29 19:01:43 LOG4 got_cormsg: From DATATAKING: tape stat 2008-May-29 19:01:43 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2008-May-29 19:01:43 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2008-May-29 19:01:43 LOG4 got_cormsg: From DATATAKING: vw% connectall 2008-May-29 19:01:43 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2008-May-29 19:01:43 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2008-May-29 19:01:43 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2008-May-29 19:01:43 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2008-May-29 19:01:43 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2008-May-29 19:01:43 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2008-May-29 19:01:43 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2008-May-29 19:01:44 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2008-May-29 19:01:44 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2048 2008-May-29 19:01:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-29 19:01:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-29 19:01:45 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2008-May-29 19:01:45 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2008-May-29 19:01:45 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2008-May-29 19:01:45 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2008-May-29 19:01:46 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-May-29 19:01:46 NOTE select_receiver: Starting to select receiver ALFA 2008-May-29 19:01:46 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-May-29 19:01:46 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-May-29 19:01:46 LOG3 vw_send: To DATATAKING: acvlbical off 2008-May-29 19:01:46 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-May-29 19:01:46 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-May-29 19:01:46 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-May-29 19:01:46 DONE finish_task: DONE finished selecting: receiver ALFA 2008-May-29 19:01:46 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-May-29 19:01:46 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-May-29 19:01:46 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-May-29 19:01:46 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-May-29 19:01:46 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-May-29 19:01:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-29 19:01:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-29 19:01:58 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2008-May-29 19:01:58 LOG4 exec_msg: From OBSERVER: restart_wapp 2008-May-29 19:01:58 LOG5 restart_wapp: Calling 'restart_wapp' 2008-May-29 19:01:58 BEGIN begin_task: Starting task 'restarting the WAPPs' 2008-May-29 19:01:58 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-May-29 19:01:58 NOTE restart_wapp: Restarting all WAPPs 2008-May-29 19:01:58 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2008-May-29 19:01:58 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2008-May-29 19:01:58 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-May-29 19:01:58 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-May-29 19:02:02 ALERT WAPP=2-wappcon: WAPP2 restarting 2008-May-29 19:02:02 ALERT WAPP=1-wappcon: WAPP1 restarting 2008-May-29 19:02:02 ALERT WAPP=4-wappcon: WAPP4 restarting 2008-May-29 19:02:02 ALERT WAPP=3-wappcon: WAPP3 restarting 2008-May-29 19:03:21 INFO1 CIMA-run_command_file: Transferring command file 'command_galfasrc.cmd ' to executive ... 2008-May-29 19:03:22 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 5 {LOAD togs_ages.conf} 2008-May-29 19:03:22 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 6 {CATALOG togs_ages.cat} 2008-May-29 19:03:22 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {IF lst < 10 then GOTO galfasrc} 2008-May-29 19:03:22 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {IF lst >= 10 then GOTO galfasrc2} 2008-May-29 19:03:22 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {ALFAANGLE 19} 2008-May-29 19:03:22 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 10 {WAITTRACK} 2008-May-29 19:03:22 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 14 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2008-May-29 19:03:22 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-May-29 19:03:22 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc.cmd 1 1 7 2008-May-29 19:03:22 LOG4 run_command_file: Calling 'run_command_file command_galfasrc.cmd 1 1 7' 2008-May-29 19:03:22 BEGIN begin_task: Starting task 'running command file 'command_galfasrc.cmd'' 2008-May-29 19:03:22 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-May-29 19:03:22 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc.cmd' ...} 2008-May-29 19:03:22 NOTE run_command_file: Starting execution of command file 'command_galfasrc.cmd' from line 1 2008-May-29 19:03:22 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_ages.conf' 2008-May-29 19:03:22 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2008-May-29 19:03:22 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-May-29 19:03:22 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2008-May-29 19:03:22 NOTE CIMA-load_config_file: Loading configuration file 'togs_ages.conf' 2008-May-29 19:03:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-May-29 19:03:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-May-29 19:03:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-May-29 19:03:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-May-29 19:03:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-May-29 19:03:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2008-May-29 19:03:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-May-29 19:03:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1381.2" 2008-May-29 19:03:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1381.2" 2008-May-29 19:03:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1381.2" 2008-May-29 19:03:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1381.2" 2008-May-29 19:03:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1381.2" 2008-May-29 19:03:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1381.2" 2008-May-29 19:03:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1381.2" 2008-May-29 19:03:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1381.2" 2008-May-29 19:03:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1381.2" 2008-May-29 19:03:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-May-29 19:03:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-May-29 19:03:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-May-29 19:03:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-May-29 19:03:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-May-29 19:03:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-May-29 19:03:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-May-29 19:03:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-May-29 19:03:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-May-29 19:03:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-May-29 19:03:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-May-29 19:03:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-May-29 19:03:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-May-29 19:03:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2008-May-29 19:03:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-May-29 19:03:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-May-29 19:03:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-May-29 19:03:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-May-29 19:03:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-May-29 19:03:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-May-29 19:03:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-May-29 19:03:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-May-29 19:03:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-May-29 19:03:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1631.200000" 2008-May-29 19:03:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-May-29 19:03:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-May-29 19:03:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-May-29 19:03:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-May-29 19:03:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-May-29 19:03:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-May-29 19:03:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-May-29 19:03:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-May-29 19:03:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-May-29 19:03:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-May-29 19:03:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-May-29 19:03:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-May-29 19:03:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-May-29 19:03:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-May-29 19:03:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-May-29 19:03:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-May-29 19:03:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-May-29 19:03:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-May-29 19:03:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-May-29 19:03:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-May-29 19:03:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-May-29 19:03:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-May-29 19:03:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-May-29 19:03:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-May-29 19:03:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-May-29 19:03:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-May-29 19:03:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-May-29 19:03:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-May-29 19:03:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-May-29 19:03:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-May-29 19:03:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-May-29 19:03:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-May-29 19:03:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-May-29 19:03:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-May-29 19:03:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-May-29 19:03:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-May-29 19:03:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-May-29 19:03:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-May-29 19:03:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-May-29 19:03:24 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-May-29 19:03:24 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-May-29 19:03:24 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-May-29 19:03:24 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-May-29 19:03:24 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-May-29 19:03:24 INFO1 config_iflo: Selecting receiver ALFA 2008-May-29 19:03:24 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2008-May-29 19:03:24 LOG1 select_receiver: Calling 'select_receiver alfa no no no' 2008-May-29 19:03:24 START begin_task: Starting task 'selecting receiver ALFA' 2008-May-29 19:03:24 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-May-29 19:03:24 NOTE select_receiver: Starting to select receiver ALFA 2008-May-29 19:03:24 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-May-29 19:03:24 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-May-29 19:03:24 LOG3 vw_send: To DATATAKING: acvlbical off 2008-May-29 19:03:24 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-May-29 19:03:24 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-May-29 19:03:24 LOG5 finish_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-May-29 19:03:24 INFO2 finish_task: DONE finished selecting: receiver ALFA 2008-May-29 19:03:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-May-29 19:03:24 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-May-29 19:03:24 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-May-29 19:03:24 START begin_task: Starting task 'waiting for receiver ALFA' 2008-May-29 19:03:24 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2008-May-29 19:03:24 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2008-May-29 19:03:24 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2008-May-29 19:03:24 INFO1 config_iflo: Configuring rest of the IF/LO path 2008-May-29 19:03:24 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2008-May-29 19:03:24 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-May-29 19:03:24 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-May-29 19:03:24 START begin_task: Starting task 'waiting on command to ALFA' 2008-May-29 19:03:24 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2008-May-29 19:03:24 LOG4 got_alfamon: From ALFAMON: ACK 2008-May-29 19:03:24 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-May-29 19:03:24 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2008-May-29 19:03:24 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-May-29 19:03:24 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-May-29 19:03:24 LOG3 vw_send: To DATATAKING: alfafb 1 2008-May-29 19:03:24 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2008-May-29 19:03:24 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-May-29 19:03:24 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-May-29 19:03:24 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2008-May-29 19:03:24 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2008-May-29 19:03:24 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2008-May-29 19:03:24 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2008-May-29 19:03:24 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2008-May-29 19:03:24 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2008-May-29 19:03:25 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-May-29 19:03:25 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-May-29 19:03:25 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-May-29 19:03:25 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-May-29 19:03:25 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-May-29 19:03:25 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2008-May-29 19:03:25 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2008-May-29 19:03:25 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2008-May-29 19:03:25 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2008-May-29 19:03:25 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-May-29 19:03:25 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2008-May-29 19:03:25 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-May-29 19:03:25 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-May-29 19:03:25 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-29 19:03:25 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-May-29 19:03:25 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2008-May-29 19:03:25 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-May-29 19:03:25 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2008-May-29 19:03:25 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2008-May-29 19:03:25 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-May-29 19:03:25 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-May-29 19:03:25 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-May-29 19:03:25 LOG5 begin_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2008-May-29 19:03:25 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-May-29 19:03:25 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-May-29 19:03:25 LOG4 got_cormsg: From DATATAKING: alfafb 1 2008-May-29 19:03:25 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2008-May-29 19:03:25 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2008-May-29 19:03:25 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2008-May-29 19:03:25 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2008-May-29 19:03:25 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2008-May-29 19:03:25 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2008-May-29 19:03:25 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2008-May-29 19:03:25 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2008-May-29 19:03:25 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2008-May-29 19:03:25 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2008-May-29 19:03:25 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2008-May-29 19:03:25 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-May-29 19:03:25 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2008-May-29 19:03:25 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-May-29 19:03:25 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-29 19:03:25 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-May-29 19:03:25 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2008-May-29 19:03:25 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2008-May-29 19:03:25 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2008-May-29 19:03:25 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-May-29 19:03:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-29 19:03:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-29 19:03:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-29 19:03:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-29 19:03:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-29 19:03:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-29 19:03:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-29 19:03:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-29 19:03:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-29 19:03:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-29 19:03:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-29 19:03:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-29 19:03:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-29 19:03:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-29 19:03:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-29 19:03:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-29 19:03:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-29 19:03:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-29 19:03:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-29 19:03:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-29 19:03:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-29 19:03:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-29 19:03:41 LOG4 got_cormsg: From DATATAKING: DONE 2008-May-29 19:03:41 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-May-29 19:03:41 LOG5 end_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2008-May-29 19:03:41 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-May-29 19:03:41 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-May-29 19:03:41 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-May-29 19:03:41 DONE finish_task: DONE finished configuration: IF/LO path 2008-May-29 19:03:41 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-May-29 19:03:41 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-May-29 19:03:41 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-May-29 19:03:41 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-May-29 19:03:41 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-May-29 19:03:41 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-May-29 19:03:41 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-May-29 19:03:41 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2008-May-29 19:03:41 START begin_task: Starting task 'selecting calibration port' 2008-May-29 19:03:41 LOG5 begin_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-May-29 19:03:41 LOG3 vw_send: To DATATAKING: calport 3 2008-May-29 19:03:41 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-May-29 19:03:41 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-May-29 19:03:41 START begin_task: Starting task 'waiting on calport' 2008-May-29 19:03:41 LOG5 begin_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2008-May-29 19:03:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-29 19:03:41 LOG4 got_cormsg: From DATATAKING: calport 3 2008-May-29 19:03:41 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-May-29 19:03:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-29 19:03:41 LOG4 got_cormsg: From DATATAKING: DONE 2008-May-29 19:03:41 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-May-29 19:03:41 LOG5 end_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2008-May-29 19:03:41 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-May-29 19:03:41 STOP finish_task: Finishing task 'selecting calibration port' 2008-May-29 19:03:41 LOG5 finish_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-May-29 19:03:41 INFO2 finish_task: DONE finished configuring: calibration port 2008-May-29 19:03:41 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-May-29 19:03:41 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-May-29 19:03:41 LOG5 end_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-May-29 19:03:41 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-May-29 19:03:41 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-May-29 19:03:41 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-May-29 19:03:41 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2008-May-29 19:03:41 LOG3 CALCONTROL-caltrig: Software trigger 2008-May-29 19:03:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-29 19:03:41 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-May-29 19:03:41 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-May-29 19:03:41 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-May-29 19:03:41 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2008-May-29 19:03:41 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-May-29 19:03:41 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-May-29 19:03:41 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-May-29 19:03:41 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-May-29 19:03:41 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-May-29 19:03:41 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-May-29 19:03:41 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-May-29 19:03:41 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-May-29 19:03:41 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 SS&WvD 2008-May-29 19:03:41 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 SS&WvD 2008-May-29 19:03:41 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 SS&WvD 2008-May-29 19:03:41 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 SS&WvD 2008-May-29 19:03:41 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-May-29 19:03:41 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-May-29 19:03:42 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-May-29 19:03:42 LOG5 begin_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2008-May-29 19:03:42 LOG3 CALCONTROL-caltrig: Software trigger 2008-May-29 19:03:42 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-May-29 19:03:42 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-May-29 19:03:42 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-May-29 19:03:42 LOG5 end_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2008-May-29 19:03:42 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 SS&WvD 2008-May-29 19:03:42 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 SS&WvD 2008-May-29 19:03:42 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 SS&WvD 2008-May-29 19:03:42 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 SS&WvD 2008-May-29 19:03:42 STOP finish_task: Finishing task 'configuring WAPPs' 2008-May-29 19:03:42 LOG5 finish_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-May-29 19:03:42 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-May-29 19:03:42 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-May-29 19:03:42 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-May-29 19:03:42 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-May-29 19:03:42 COMMAND run_command_line: EXECUTING command 6: 'CATALOG togs_ages.cat' 2008-May-29 19:03:42 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/togs_ages.cat' 2008-May-29 19:03:42 COMMAND run_command_line: EXECUTING command 7: 'IF lst < 10 then GOTO galfasrc' 2008-May-29 19:03:42 INFO5 is_if_valid: Evaluating condition: LST < 10 2008-May-29 19:03:42 INFO5 is_if_valid: Condition parsed as: 11.133611 < 10 2008-May-29 19:03:42 INFO1 is_if_valid: Skipping line 'IF lst < 10 then GOTO galfasrc' 2008-May-29 19:03:42 COMMAND run_command_line: EXECUTING command 8: 'IF lst >= 10 then GOTO galfasrc2' 2008-May-29 19:03:42 INFO5 is_if_valid: Evaluating condition: LST >= 10 2008-May-29 19:03:42 INFO5 is_if_valid: Condition parsed as: 11.133611 >= 10 2008-May-29 19:03:42 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2048/togs_ages.cat galfasrc2 nooffset nowait' 2008-May-29 19:03:42 BEGIN begin_task: Starting task 'tracking source 'galfasrc2'' 2008-May-29 19:03:42 LOG5 begin_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2008-May-29 19:03:42 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc2' ...} 2008-May-29 19:03:42 LOG3 track_source: Calling 'track_source galfasrc2 115900.0 +073000 J 0.0 0.0 main small /share/obs4/usr/a2048/togs_ages.cat 0 Topocentric velocity(optical)' 2008-May-29 19:03:42 START begin_task: Starting task 'sending tracking commands' 2008-May-29 19:03:42 LOG5 begin_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2008-May-29 19:03:42 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc2} INFO {Slewing to source 'galfasrc2' ...} 2008-May-29 19:03:42 INFO1 track_source: Starting to track galfasrc2 2008-May-29 19:03:42 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc2" 2008-May-29 19:03:42 LOG3 vw_send: To DATATAKING: set ra 115900.0 2008-May-29 19:03:42 LOG3 vw_send: To DATATAKING: set dec +073000 2008-May-29 19:03:42 LOG3 vw_send: To DATATAKING: pnt tr send 2008-May-29 19:03:42 LOG3 vw_send: To DATATAKING: pnt tr 115900.0 +073000 -CJ 2008-May-29 19:03:43 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-May-29 19:03:43 STOP finish_task: Finishing task 'sending tracking commands' 2008-May-29 19:03:43 LOG5 finish_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2008-May-29 19:03:43 INFO2 finish_task: DONE finished sending: tracking commands 2008-May-29 19:03:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-May-29 19:03:43 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-May-29 19:03:43 LOG5 end_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2008-May-29 19:03:43 STOP finish_task: Finishing task 'tracking source 'galfasrc2'' 2008-May-29 19:03:43 LOG5 finish_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2008-May-29 19:03:43 DONE finish_task: DONE finished tracking: source 'galfasrc2' 2008-May-29 19:03:43 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-May-29 19:03:43 END end_task: Finishing task 'tracking source 'galfasrc2'' with status 'OK' 2008-May-29 19:03:43 LOG5 end_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2008-May-29 19:03:43 COMMAND run_command_line: EXECUTING command 9: 'ALFAANGLE 19' 2008-May-29 19:03:43 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2008-May-29 19:03:43 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-May-29 19:03:43 LOG5 begin_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2008-May-29 19:03:43 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-May-29 19:03:43 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-May-29 19:03:43 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-May-29 19:03:43 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-May-29 19:03:43 START begin_task: Starting task 'waiting on ALFA rotation' 2008-May-29 19:03:43 LOG5 begin_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2008-May-29 19:03:43 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 SS&WvD' 2008-May-29 19:03:43 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc2" 2008-May-29 19:03:43 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-May-29 19:03:43 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-May-29 19:03:43 LOG4 got_cormsg: From DATATAKING: set ra 115900.0 2008-May-29 19:03:43 LOG4 got_cormsg: From DATATAKING: vw% 115900.0 2008-May-29 19:03:43 LOG4 got_cormsg: From DATATAKING: 2008-May-29 19:03:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-29 19:03:43 LOG4 got_cormsg: From DATATAKING: set dec +073000 2008-May-29 19:03:43 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-May-29 19:03:43 LOG4 got_cormsg: From DATATAKING: pnt tr 115900.0 +073000 -CJ 2008-May-29 19:03:43 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-May-29 19:03:43 LOG4 got_cormsg: From DATATAKING: +073000 2008-May-29 19:03:43 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2008-May-29 19:03:43 NOTE WAPPDATA-new_file: New FITS file: wapp.20080529.a2048.0000.fits 2008-May-29 19:03:43 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20080529.a2048.0000.fits} 2008-May-29 19:03:43 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 SS&WvD' 2008-May-29 19:03:50 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-May-29 19:03:50 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-May-29 19:03:50 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-May-29 19:03:50 LOG5 end_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2008-May-29 19:03:50 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-May-29 19:03:50 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-May-29 19:03:50 LOG5 finish_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2008-May-29 19:03:50 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-May-29 19:03:50 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-May-29 19:03:50 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-May-29 19:03:50 LOG5 end_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2008-May-29 19:03:50 COMMAND run_command_line: EXECUTING command 10: 'WAITTRACK' 2008-May-29 19:03:50 BEGIN begin_task: Starting task 'waiting on telescope' 2008-May-29 19:03:51 LOG5 begin_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2008-May-29 19:03:51 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-May-29 19:03:51 LOG3 waittrk: Start waittrk 5 2008-May-29 19:03:51 START begin_task: Starting task 'waiting on telescope movement' 2008-May-29 19:03:51 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2008-May-29 19:03:56 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-May-29 19:03:56 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2008-May-29 19:03:56 START begin_task: Starting task 'waiting on telescope on source' 2008-May-29 19:03:56 LOG5 begin_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2008-May-29 19:06:57 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-May-29 19:06:57 LOG5 end_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2008-May-29 19:06:57 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-May-29 19:06:57 INFO2 waittrk: Now tracking galfasrc2 2008-May-29 19:06:58 LOG4 waittrk: Current telescope position: Az = 311.02 ZA = 15.99 2008-May-29 19:06:58 STOP finish_task: Finishing task 'waiting on telescope' 2008-May-29 19:06:58 LOG5 finish_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2008-May-29 19:06:58 DONE finish_task: DONE finished waiting: telescope on source 2008-May-29 19:06:58 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-May-29 19:06:58 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-May-29 19:06:58 LOG5 end_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2008-May-29 19:06:58 COMMAND run_command_line: EXECUTING command 14: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2008-May-29 19:06:58 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2008-May-29 19:06:58 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-May-29 19:06:58 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first 0 {1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2008-May-29 19:06:58 BEGIN begin_task: Starting task 'smart frequency switching' 2008-May-29 19:06:58 LOG5 begin_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2008-May-29 19:06:58 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'galfasrc2' 2008-May-29 19:06:58 INFO1 smartfreq: Starting pattern: Smart frequency switching 2008-May-29 19:06:58 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2008-May-29 19:06:58 START begin_task: Starting task 'selecting calibration type' 2008-May-29 19:06:58 LOG5 begin_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2008-May-29 19:06:58 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-May-29 19:06:58 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-May-29 19:06:58 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-May-29 19:06:58 START begin_task: Starting task 'waiting on setcal' 2008-May-29 19:06:58 LOG5 begin_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2008-May-29 19:06:58 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-May-29 19:06:58 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-May-29 19:06:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-29 19:06:59 LOG4 got_cormsg: From DATATAKING: DONE 2008-May-29 19:06:59 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-May-29 19:06:59 LOG5 end_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2008-May-29 19:06:59 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-May-29 19:06:59 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-May-29 19:06:59 LOG3 socket_wait: To ALFAMON: CAL HI 2008-May-29 19:06:59 START begin_task: Starting task 'waiting on command to ALFA' 2008-May-29 19:06:59 LOG5 begin_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2008-May-29 19:06:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-29 19:06:59 LOG4 got_alfamon: From ALFAMON: ACK 2008-May-29 19:06:59 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-May-29 19:06:59 LOG5 end_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2008-May-29 19:06:59 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-May-29 19:06:59 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-May-29 19:06:59 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-May-29 19:06:59 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-May-29 19:06:59 START begin_task: Starting task 'waiting on command to ALFA' 2008-May-29 19:06:59 LOG5 begin_task: Level: (4) ID = <10025> Status = 0 0 0 0 ok 2008-May-29 19:06:59 LOG4 got_alfamon: From ALFAMON: ACK 2008-May-29 19:06:59 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-May-29 19:06:59 LOG5 end_task: Level: (4) ID = <10025> Status = 0 0 0 0 ok 2008-May-29 19:06:59 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-May-29 19:06:59 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-May-29 19:06:59 STOP finish_task: Finishing task 'selecting calibration type' 2008-May-29 19:06:59 LOG5 finish_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2008-May-29 19:06:59 INFO2 finish_task: DONE finished configuring: calibration type 2008-May-29 19:06:59 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-May-29 19:06:59 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-May-29 19:06:59 LOG5 end_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2008-May-29 19:06:59 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 SS&WvD 2008-May-29 19:06:59 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 SS&WvD 2008-May-29 19:06:59 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 SS&WvD 2008-May-29 19:06:59 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 SS&WvD 2008-May-29 19:06:59 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20080529.a2048.0000.fits' is empty! 2008-May-29 19:06:59 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2008-May-29 19:06:59 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-May-29 19:06:59 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2008-May-29 19:06:59 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-May-29 19:06:59 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-May-29 19:06:59 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-May-29 19:06:59 LOG5 begin_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-May-29 19:06:59 LOG3 CALCONTROL-caltrig: Software trigger 2008-May-29 19:06:59 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-May-29 19:06:59 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-May-29 19:06:59 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-May-29 19:06:59 LOG5 end_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-May-29 19:06:59 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2008-May-29 19:06:59 START begin_task: Starting task 'adjusting WAPP power' 2008-May-29 19:06:59 LOG5 begin_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2008-May-29 19:06:59 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-May-29 19:06:59 INFO2 adjust_power: Starting to adjust WAPP power 2008-May-29 19:06:59 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-May-29 19:06:59 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-May-29 19:06:59 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-May-29 19:06:59 START begin_task: Starting task 'waiting on adjpwrif2' 2008-May-29 19:06:59 LOG5 begin_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2008-May-29 19:06:59 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-May-29 19:06:59 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-May-29 19:06:59 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 SS&WvD' 2008-May-29 19:07:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-29 19:07:03 LOG4 got_cormsg: From DATATAKING: DONE 2008-May-29 19:07:03 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-May-29 19:07:03 LOG5 end_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2008-May-29 19:07:03 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-May-29 19:07:03 START begin_task: Starting task 'adjusting WAPP power' 2008-May-29 19:07:03 LOG5 begin_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2008-May-29 19:07:03 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-May-29 19:07:03 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-May-29 19:07:03 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-May-29 19:07:03 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-May-29 19:07:03 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-May-29 19:07:03 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-May-29 19:07:03 LOG5 begin_task: Level: (5) ID = <10030> Status = 0 0 0 0 ok 2008-May-29 19:07:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-29 19:07:03 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-May-29 19:07:03 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 7 dB --- beam 1: 8 7 dB 2008-May-29 19:07:03 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 6 dB 2008-May-29 19:07:03 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 4 dB 2008-May-29 19:07:03 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 3 3 dB 2008-May-29 19:07:03 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-May-29 19:07:03 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-May-29 19:07:03 LOG5 end_task: Level: (5) ID = <10030> Status = 0 0 0 0 ok 2008-May-29 19:07:03 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.069 0.908 ALFA beam 1: 0.905 0.913 2008-May-29 19:07:03 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.034 1.042 ALFA beam 3: 1.028 0.895 2008-May-29 19:07:03 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.880 0.998 ALFA beam 5: 1.065 0.973 2008-May-29 19:07:03 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.044 1.032 ALFA beam 7: 0.914 0.916 2008-May-29 19:07:03 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-May-29 19:07:03 LOG5 finish_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2008-May-29 19:07:03 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-May-29 19:07:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-May-29 19:07:03 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-May-29 19:07:03 LOG5 end_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2008-May-29 19:07:03 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-May-29 19:07:03 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-May-29 19:07:03 LOG5 finish_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2008-May-29 19:07:03 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-May-29 19:07:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-May-29 19:07:03 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-May-29 19:07:03 LOG5 end_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2008-May-29 19:07:03 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2008-May-29 19:07:03 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2008-May-29 19:07:03 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2008-May-29 19:07:03 LOG5 antvel: Calling 'antvel 115900.000000 73000.000000 J 0' 2008-May-29 19:07:03 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +07:30:00.0 Epoch = 2008.41286 J 2008-May-29 19:07:03 LOG2 antvel: Computed apparent RA = 11:59:26.9 Dec = +07:27:07.4 2008-May-29 19:07:03 LOG2 antvel: Parameters to Doppler: Topocentric 83223 2008 150 0.0 2008-May-29 19:07:03 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-May-29 19:07:03 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2008-May-29 19:07:03 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2008-May-29 19:07:03 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-May-29 19:07:03 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-May-29 19:07:03 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2008-May-29 19:07:03 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-29 19:07:04 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-May-29 19:07:04 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-May-29 19:07:04 LOG5 begin_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2008-May-29 19:07:04 LOG5 log_alfabeam: Parameters: 11.983333333333333 7.5 11.189875 2008.4128584873374 18.999933 2008-May-29 19:07:04 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333331 7.499999999999995 2008-May-29 19:07:04 LOG4 log_alfabeam: ALFABEAM 1 11.977469381622745 7.560515330401024 2008-May-29 19:07:04 LOG4 log_alfabeam: ALFABEAM 2 11.977607508268969 7.462476819302405 2008-May-29 19:07:04 LOG4 log_alfabeam: ALFABEAM 3 11.983456464343083 7.401648105225036 2008-May-29 19:07:04 LOG4 log_alfabeam: ALFABEAM 4 11.989205189429354 7.439639779298486 2008-May-29 19:07:04 LOG4 log_alfabeam: ALFABEAM 5 11.989055332243579 7.538086139498533 2008-May-29 19:07:04 LOG4 log_alfabeam: ALFABEAM 6 11.983168579275892 7.598131813552031 2008-May-29 19:07:04 INFO2 take_data: Starting WAPP+GALFA scan: 815000077 2008-May-29 19:07:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-May-29 19:07:04 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-May-29 19:07:04 LOG5 begin_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2008-May-29 19:07:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-29 19:07:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2008-May-29 19:07:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-29 19:07:04 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-29 19:07:04 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-29 19:07:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83225.00 2008-May-29 19:07:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-29 19:07:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-29 19:07:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-29 19:07:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-29 19:07:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-29 19:07:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-May-29 19:07:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-May-29 19:07:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-May-29 19:07:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-May-29 19:07:15 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-29 19:07:15 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-May-29 19:07:15 LOG5 end_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2008-May-29 19:07:15 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-May-29 19:07:15 LOG5 end_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2008-May-29 19:07:15 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2008-May-29 19:07:15 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2008-May-29 19:07:15 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2008-May-29 19:07:15 LOG5 antvel: Calling 'antvel 115900.000000 73000.000000 J 0' 2008-May-29 19:07:15 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +07:30:00.0 Epoch = 2008.41286 J 2008-May-29 19:07:15 LOG2 antvel: Computed apparent RA = 11:59:26.9 Dec = +07:27:07.4 2008-May-29 19:07:15 LOG2 antvel: Parameters to Doppler: Topocentric 83235 2008 150 0.0 2008-May-29 19:07:15 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-May-29 19:07:15 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2008-May-29 19:07:15 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2008-May-29 19:07:15 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-May-29 19:07:15 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-May-29 19:07:15 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2008-May-29 19:07:15 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-29 19:07:15 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-May-29 19:07:15 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-May-29 19:07:15 LOG5 begin_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2008-May-29 19:07:15 LOG5 log_alfabeam: Parameters: 11.983333333333333 7.5 11.193218 2008.4128588675944 18.999933 2008-May-29 19:07:15 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333329 7.500000000000007 2008-May-29 19:07:15 LOG4 log_alfabeam: ALFABEAM 1 11.977477552635909 7.560690033202247 2008-May-29 19:07:15 LOG4 log_alfabeam: ALFABEAM 2 11.977602461391868 7.462648085055067 2008-May-29 19:07:15 LOG4 log_alfabeam: ALFABEAM 3 11.983443175513798 7.401644380713292 2008-May-29 19:07:15 LOG4 log_alfabeam: ALFABEAM 4 11.989197061706514 7.439465246625785 2008-May-29 19:07:15 LOG4 log_alfabeam: ALFABEAM 5 11.989060442395195 7.537916351878103 2008-May-29 19:07:15 LOG4 log_alfabeam: ALFABEAM 6 11.983181746588748 7.598136262554611 2008-May-29 19:07:15 INFO2 take_data: Starting WAPP+GALFA scan: 815000078 2008-May-29 19:07:16 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-May-29 19:07:16 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-May-29 19:07:16 LOG5 begin_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2008-May-29 19:07:16 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-29 19:07:16 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2008-May-29 19:07:16 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-29 19:07:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-29 19:07:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-29 19:07:16 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83237.00 2008-May-29 19:07:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-29 19:07:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-29 19:07:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-29 19:07:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-29 19:07:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-29 19:07:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-May-29 19:07:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-May-29 19:07:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-May-29 19:07:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-May-29 19:07:27 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-29 19:07:27 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-May-29 19:07:27 LOG5 end_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2008-May-29 19:07:27 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-May-29 19:07:27 LOG5 end_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2008-May-29 19:07:27 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2008-May-29 19:07:27 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2008-May-29 19:07:27 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2008-May-29 19:07:27 LOG5 antvel: Calling 'antvel 115900.000000 73000.000000 J 0' 2008-May-29 19:07:27 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +07:30:00.0 Epoch = 2008.41286 J 2008-May-29 19:07:27 LOG2 antvel: Computed apparent RA = 11:59:26.9 Dec = +07:27:07.4 2008-May-29 19:07:27 LOG2 antvel: Parameters to Doppler: Topocentric 83247 2008 150 0.0 2008-May-29 19:07:27 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-May-29 19:07:27 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2008-May-29 19:07:27 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2008-May-29 19:07:27 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-May-29 19:07:27 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-May-29 19:07:27 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2008-May-29 19:07:27 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-29 19:07:27 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-May-29 19:07:27 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-May-29 19:07:27 LOG5 begin_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2008-May-29 19:07:27 LOG5 log_alfabeam: Parameters: 11.983333333333333 7.5 11.196560 2008.4128592478514 18.999933 2008-May-29 19:07:27 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333331 7.499999999999995 2008-May-29 19:07:27 LOG4 log_alfabeam: ALFABEAM 1 11.977485783026617 7.560865253337179 2008-May-29 19:07:27 LOG4 log_alfabeam: ALFABEAM 2 11.977597415781759 7.462820248731917 2008-May-29 19:07:27 LOG4 log_alfabeam: ALFABEAM 3 11.983429828215186 7.401641040310701 2008-May-29 19:07:27 LOG4 log_alfabeam: ALFABEAM 4 11.989188874841668 7.439290194467528 2008-May-29 19:07:27 LOG4 log_alfabeam: ALFABEAM 5 11.989065551954567 7.537745668118722 2008-May-29 19:07:27 LOG4 log_alfabeam: ALFABEAM 6 11.983194972092386 7.598140338356960 2008-May-29 19:07:27 INFO2 take_data: Starting WAPP+GALFA scan: 815000079 2008-May-29 19:07:28 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-May-29 19:07:28 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-May-29 19:07:28 LOG5 begin_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2008-May-29 19:07:28 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-29 19:07:28 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2008-May-29 19:07:28 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-29 19:07:28 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-29 19:07:28 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-29 19:07:28 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83249.00 2008-May-29 19:07:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-29 19:07:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-29 19:07:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-29 19:07:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-29 19:07:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-29 19:07:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-May-29 19:07:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-May-29 19:07:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-May-29 19:07:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-May-29 19:07:39 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-29 19:07:39 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-May-29 19:07:39 LOG5 end_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2008-May-29 19:07:39 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-May-29 19:07:39 LOG5 end_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2008-May-29 19:07:39 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2008-May-29 19:07:39 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2008-May-29 19:07:39 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2008-May-29 19:07:39 LOG5 antvel: Calling 'antvel 115900.000000 73000.000000 J 0' 2008-May-29 19:07:39 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +07:30:00.0 Epoch = 2008.41286 J 2008-May-29 19:07:39 LOG2 antvel: Computed apparent RA = 11:59:26.9 Dec = +07:27:07.4 2008-May-29 19:07:39 LOG2 antvel: Parameters to Doppler: Topocentric 83259 2008 150 0.0 2008-May-29 19:07:39 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-May-29 19:07:39 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2008-May-29 19:07:39 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2008-May-29 19:07:39 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-May-29 19:07:39 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-May-29 19:07:39 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2008-May-29 19:07:39 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-29 19:07:39 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-May-29 19:07:39 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-May-29 19:07:39 LOG5 begin_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2008-May-29 19:07:39 LOG5 log_alfabeam: Parameters: 11.983333333333333 7.5 11.199903 2008.4128596281084 18.999933 2008-May-29 19:07:39 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333331 7.500000000000006 2008-May-29 19:07:39 LOG4 log_alfabeam: ALFABEAM 1 11.977494078199543 7.561041095361253 2008-May-29 19:07:39 LOG4 log_alfabeam: ALFABEAM 2 11.977592368654859 7.462993418542540 2008-May-29 19:07:39 LOG4 log_alfabeam: ALFABEAM 3 11.983416414215062 7.401638087562142 2008-May-29 19:07:39 LOG4 log_alfabeam: ALFABEAM 4 11.989180623457093 7.439114518332005 2008-May-29 19:07:39 LOG4 log_alfabeam: ALFABEAM 5 11.989070663749320 7.537573980844624 2008-May-29 19:07:39 LOG4 log_alfabeam: ALFABEAM 6 11.983208263948622 7.598144037960041 2008-May-29 19:07:39 INFO2 take_data: Starting WAPP+GALFA scan: 815000080 2008-May-29 19:07:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-May-29 19:07:40 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-May-29 19:07:40 LOG5 begin_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2008-May-29 19:07:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-29 19:07:40 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2008-May-29 19:07:40 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-29 19:07:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-29 19:07:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-29 19:07:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83261.00 2008-May-29 19:07:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-29 19:07:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-29 19:07:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-29 19:07:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-29 19:07:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-29 19:07:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-May-29 19:07:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-May-29 19:07:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-May-29 19:07:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-May-29 19:07:51 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-29 19:07:51 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-May-29 19:07:51 LOG5 end_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2008-May-29 19:07:51 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-May-29 19:07:51 LOG5 end_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2008-May-29 19:07:51 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2008-May-29 19:07:51 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2008-May-29 19:07:51 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2008-May-29 19:07:51 LOG5 antvel: Calling 'antvel 115900.000000 73000.000000 J 0' 2008-May-29 19:07:51 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +07:30:00.0 Epoch = 2008.41286 J 2008-May-29 19:07:51 LOG2 antvel: Computed apparent RA = 11:59:26.9 Dec = +07:27:07.4 2008-May-29 19:07:51 LOG2 antvel: Parameters to Doppler: Topocentric 83271 2008 150 0.0 2008-May-29 19:07:51 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-May-29 19:07:51 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2008-May-29 19:07:51 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2008-May-29 19:07:51 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-May-29 19:07:51 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-May-29 19:07:51 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2008-May-29 19:07:51 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-29 19:07:51 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-May-29 19:07:51 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-May-29 19:07:51 LOG5 begin_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2008-May-29 19:07:51 LOG5 log_alfabeam: Parameters: 11.983333333333333 7.5 11.203245 2008.4128600083654 18.999933 2008-May-29 19:07:51 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333333 7.500000000000003 2008-May-29 19:07:51 LOG4 log_alfabeam: ALFABEAM 1 11.977502433673886 7.561217453719137 2008-May-29 19:07:51 LOG4 log_alfabeam: ALFABEAM 2 11.977587323270239 7.463167496070760 2008-May-29 19:07:51 LOG4 log_alfabeam: ALFABEAM 3 11.983402941295173 7.401635529835837 2008-May-29 19:07:51 LOG4 log_alfabeam: ALFABEAM 4 11.989172312008279 7.438938323638101 2008-May-29 19:07:51 LOG4 log_alfabeam: ALFABEAM 5 11.989075774487334 7.537401387531965 2008-May-29 19:07:51 LOG4 log_alfabeam: ALFABEAM 6 11.983221614451452 7.598147353655008 2008-May-29 19:07:51 INFO2 take_data: Starting WAPP+GALFA scan: 815000081 2008-May-29 19:07:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-May-29 19:07:52 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-May-29 19:07:52 LOG5 begin_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2008-May-29 19:07:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-29 19:07:52 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2008-May-29 19:07:52 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-29 19:07:52 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-29 19:07:52 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-29 19:07:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83273.00 2008-May-29 19:07:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-29 19:07:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-29 19:07:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-29 19:07:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-29 19:07:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-29 19:07:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-May-29 19:07:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-May-29 19:07:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-May-29 19:07:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-May-29 19:08:03 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-29 19:08:03 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-May-29 19:08:03 LOG5 end_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2008-May-29 19:08:03 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-May-29 19:08:03 LOG5 end_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2008-May-29 19:08:03 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2008-May-29 19:08:03 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2008-May-29 19:08:03 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2008-May-29 19:08:03 LOG5 antvel: Calling 'antvel 115900.000000 73000.000000 J 0' 2008-May-29 19:08:03 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +07:30:00.0 Epoch = 2008.41286 J 2008-May-29 19:08:03 LOG2 antvel: Computed apparent RA = 11:59:26.9 Dec = +07:27:07.4 2008-May-29 19:08:03 LOG2 antvel: Parameters to Doppler: Topocentric 83283 2008 150 0.0 2008-May-29 19:08:03 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-May-29 19:08:03 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2008-May-29 19:08:03 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2008-May-29 19:08:03 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-May-29 19:08:03 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-May-29 19:08:03 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2008-May-29 19:08:03 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-29 19:08:03 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-May-29 19:08:03 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-May-29 19:08:03 LOG5 begin_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2008-May-29 19:08:03 LOG5 log_alfabeam: Parameters: 11.983333333333333 7.5 11.206588 2008.4128603886227 18.999933 2008-May-29 19:08:03 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333336 7.499999999999988 2008-May-29 19:08:03 LOG4 log_alfabeam: ALFABEAM 1 11.977510854934888 7.561394433543776 2008-May-29 19:08:03 LOG4 log_alfabeam: ALFABEAM 2 11.977582276852097 7.463342590687066 2008-May-29 19:08:03 LOG4 log_alfabeam: ALFABEAM 3 11.983389401150333 7.401633371265597 2008-May-29 19:08:03 LOG4 log_alfabeam: ALFABEAM 4 11.989163935037194 7.438761505313191 2008-May-29 19:08:03 LOG4 log_alfabeam: ALFABEAM 5 11.989080886989129 7.537227779644185 2008-May-29 19:08:03 LOG4 log_alfabeam: ALFABEAM 6 11.983235031835482 7.598150281868571 2008-May-29 19:08:03 INFO2 take_data: Starting WAPP+GALFA scan: 815000082 2008-May-29 19:08:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-May-29 19:08:04 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-May-29 19:08:04 LOG5 begin_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2008-May-29 19:08:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-29 19:08:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2008-May-29 19:08:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-29 19:08:04 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-29 19:08:04 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-29 19:08:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83285.00 2008-May-29 19:08:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-29 19:08:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-29 19:08:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-29 19:08:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-29 19:08:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-29 19:08:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-May-29 19:08:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-May-29 19:08:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-May-29 19:08:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-May-29 19:08:15 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-29 19:08:15 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-May-29 19:08:15 LOG5 end_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2008-May-29 19:08:15 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-May-29 19:08:15 LOG5 end_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2008-May-29 19:08:15 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2008-May-29 19:08:15 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2008-May-29 19:08:15 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2008-May-29 19:08:15 LOG5 antvel: Calling 'antvel 115900.000000 73000.000000 J 0' 2008-May-29 19:08:15 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +07:30:00.0 Epoch = 2008.41286 J 2008-May-29 19:08:15 LOG2 antvel: Computed apparent RA = 11:59:26.9 Dec = +07:27:07.4 2008-May-29 19:08:15 LOG2 antvel: Parameters to Doppler: Topocentric 83295 2008 150 0.0 2008-May-29 19:08:15 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-May-29 19:08:15 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2008-May-29 19:08:15 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2008-May-29 19:08:15 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-May-29 19:08:15 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-May-29 19:08:15 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2008-May-29 19:08:15 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-29 19:08:15 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-May-29 19:08:15 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-May-29 19:08:15 LOG5 begin_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2008-May-29 19:08:15 LOG5 log_alfabeam: Parameters: 11.983333333333333 7.5 11.209930 2008.4128607688797 18.999933 2008-May-29 19:08:15 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333331 7.499999999999993 2008-May-29 19:08:15 LOG4 log_alfabeam: ALFABEAM 1 11.977519337432019 7.561571928493581 2008-May-29 19:08:15 LOG4 log_alfabeam: ALFABEAM 2 11.977577232666988 7.463518602838167 2008-May-29 19:08:15 LOG4 log_alfabeam: ALFABEAM 3 11.983375801640010 7.401631618865985 2008-May-29 19:08:15 LOG4 log_alfabeam: ALFABEAM 4 11.989155497068733 7.438584169564236 2008-May-29 19:08:15 LOG4 log_alfabeam: ALFABEAM 5 11.989085997954261 7.537053255789664 2008-May-29 19:08:15 LOG4 log_alfabeam: ALFABEAM 6 11.983248508317491 7.598152815233250 2008-May-29 19:08:15 INFO2 take_data: Starting WAPP+GALFA scan: 815000083 2008-May-29 19:08:16 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-May-29 19:08:16 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-May-29 19:08:16 LOG5 begin_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2008-May-29 19:08:16 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-29 19:08:16 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2008-May-29 19:08:16 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-29 19:08:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-29 19:08:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-29 19:08:16 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83297.00 2008-May-29 19:08:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-29 19:08:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-29 19:08:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-29 19:08:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-29 19:08:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-29 19:08:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-May-29 19:08:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-May-29 19:08:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-May-29 19:08:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-May-29 19:08:27 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-29 19:08:27 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-May-29 19:08:27 LOG5 end_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2008-May-29 19:08:27 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-May-29 19:08:27 LOG5 end_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2008-May-29 19:08:27 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2008-May-29 19:08:27 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-May-29 19:08:27 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-May-29 19:08:27 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-May-29 19:08:27 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2008-May-29 19:08:27 LOG3 CALCONTROL-caltrig: Software trigger 2008-May-29 19:08:27 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-May-29 19:08:27 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-May-29 19:08:27 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-May-29 19:08:27 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2008-May-29 19:08:27 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2008-May-29 19:08:27 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2008-May-29 19:08:27 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2008-May-29 19:08:27 LOG5 antvel: Calling 'antvel 115900.000000 73000.000000 J 0' 2008-May-29 19:08:27 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +07:30:00.0 Epoch = 2008.41286 J 2008-May-29 19:08:27 LOG2 antvel: Computed apparent RA = 11:59:26.9 Dec = +07:27:07.4 2008-May-29 19:08:27 LOG2 antvel: Parameters to Doppler: Topocentric 83307 2008 150 0.0 2008-May-29 19:08:27 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-May-29 19:08:27 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2008-May-29 19:08:27 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2008-May-29 19:08:27 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-May-29 19:08:27 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-May-29 19:08:27 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2008-May-29 19:08:27 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-29 19:08:27 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-May-29 19:08:27 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-May-29 19:08:27 LOG5 begin_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2008-May-29 19:08:27 LOG5 log_alfabeam: Parameters: 11.983333333333333 7.5 11.213273 2008.4128611491367 18.999933 2008-May-29 19:08:27 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333327 7.500000000000006 2008-May-29 19:08:27 LOG4 log_alfabeam: ALFABEAM 1 11.977527886732219 7.561750044274083 2008-May-29 19:08:27 LOG4 log_alfabeam: ALFABEAM 2 11.977572187947855 7.463695643065570 2008-May-29 19:08:27 LOG4 log_alfabeam: ALFABEAM 3 11.983362134385674 7.401630277374991 2008-May-29 19:08:27 LOG4 log_alfabeam: ALFABEAM 4 11.989146992563480 7.438406210742436 2008-May-29 19:08:27 LOG4 log_alfabeam: ALFABEAM 5 11.989091110195448 7.536877706260791 2008-May-29 19:08:27 LOG4 log_alfabeam: ALFABEAM 6 11.983262052205285 7.598154949586491 2008-May-29 19:08:27 INFO2 take_data: Starting WAPP+GALFA scan: 815000084 2008-May-29 19:08:28 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-May-29 19:08:28 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-May-29 19:08:28 LOG5 begin_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2008-May-29 19:08:28 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-29 19:08:28 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2008-May-29 19:08:28 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-29 19:08:28 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-29 19:08:28 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-29 19:08:28 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83309.00 2008-May-29 19:08:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-29 19:08:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-29 19:08:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-29 19:08:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-29 19:08:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-29 19:08:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-May-29 19:08:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-May-29 19:08:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-May-29 19:08:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-May-29 19:08:39 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-29 19:08:39 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-May-29 19:08:39 LOG5 end_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2008-May-29 19:08:39 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-May-29 19:08:39 LOG5 end_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2008-May-29 19:08:39 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2008-May-29 19:08:39 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2008-May-29 19:08:39 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2008-May-29 19:08:39 LOG5 antvel: Calling 'antvel 115900.000000 73000.000000 J 0' 2008-May-29 19:08:39 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +07:30:00.0 Epoch = 2008.41286 J 2008-May-29 19:08:39 LOG2 antvel: Computed apparent RA = 11:59:26.9 Dec = +07:27:07.4 2008-May-29 19:08:39 LOG2 antvel: Parameters to Doppler: Topocentric 83319 2008 150 0.0 2008-May-29 19:08:39 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-May-29 19:08:39 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2008-May-29 19:08:39 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2008-May-29 19:08:39 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-May-29 19:08:39 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-May-29 19:08:39 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2008-May-29 19:08:39 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-29 19:08:39 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-May-29 19:08:39 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-May-29 19:08:39 LOG5 begin_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2008-May-29 19:08:39 LOG5 log_alfabeam: Parameters: 11.983333333333333 7.5 11.216615 2008.4128615293937 18.999933 2008-May-29 19:08:39 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333331 7.499999999999996 2008-May-29 19:08:39 LOG4 log_alfabeam: ALFABEAM 1 11.977536498213993 7.561928673754512 2008-May-29 19:08:39 LOG4 log_alfabeam: ALFABEAM 2 11.977567145968340 7.463873610663985 2008-May-29 19:08:39 LOG4 log_alfabeam: ALFABEAM 3 11.983348407325346 7.401629353441276 2008-May-29 19:08:39 LOG4 log_alfabeam: ALFABEAM 4 11.989138426116932 7.438227735845738 2008-May-29 19:08:39 LOG4 log_alfabeam: ALFABEAM 5 11.989096220404312 7.536701230813028 2008-May-29 19:08:39 LOG4 log_alfabeam: ALFABEAM 6 11.983275655637598 7.598156677913976 2008-May-29 19:08:39 INFO2 take_data: Starting WAPP+GALFA scan: 815000085 2008-May-29 19:08:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-May-29 19:08:40 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-May-29 19:08:40 LOG5 begin_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2008-May-29 19:08:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-29 19:08:40 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2008-May-29 19:08:40 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-29 19:08:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-29 19:08:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-29 19:08:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83321.00 2008-May-29 19:08:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-29 19:08:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-29 19:08:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-29 19:08:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-29 19:08:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-29 19:08:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-May-29 19:08:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-May-29 19:08:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-May-29 19:08:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-May-29 19:08:51 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-29 19:08:51 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-May-29 19:08:51 LOG5 end_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2008-May-29 19:08:51 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-May-29 19:08:51 LOG5 end_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2008-May-29 19:08:51 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2008-May-29 19:08:51 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2008-May-29 19:08:51 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2008-May-29 19:08:51 LOG5 antvel: Calling 'antvel 115900.000000 73000.000000 J 0' 2008-May-29 19:08:51 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +07:30:00.0 Epoch = 2008.41286 J 2008-May-29 19:08:51 LOG2 antvel: Computed apparent RA = 11:59:26.9 Dec = +07:27:07.4 2008-May-29 19:08:51 LOG2 antvel: Parameters to Doppler: Topocentric 83331 2008 150 0.0 2008-May-29 19:08:51 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-May-29 19:08:51 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2008-May-29 19:08:51 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2008-May-29 19:08:51 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-May-29 19:08:51 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-May-29 19:08:51 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2008-May-29 19:08:51 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-29 19:08:51 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-May-29 19:08:51 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-May-29 19:08:51 LOG5 begin_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2008-May-29 19:08:51 LOG5 log_alfabeam: Parameters: 11.983333333333333 7.5 11.219957 2008.4128619096509 18.999933 2008-May-29 19:08:51 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333327 7.499999999999995 2008-May-29 19:08:51 LOG4 log_alfabeam: ALFABEAM 1 11.977545174921028 7.562107869503800 2008-May-29 19:08:51 LOG4 log_alfabeam: ALFABEAM 2 11.977562105478871 7.464052563661280 2008-May-29 19:08:51 LOG4 log_alfabeam: ALFABEAM 3 11.983334616143029 7.401628852508469 2008-May-29 19:08:51 LOG4 log_alfabeam: ALFABEAM 4 11.989129794699613 7.438048692313280 2008-May-29 19:08:51 LOG4 log_alfabeam: ALFABEAM 5 11.989101329856245 7.536523771804973 2008-May-29 19:08:51 LOG4 log_alfabeam: ALFABEAM 6 11.983289322896638 7.598157995116813 2008-May-29 19:08:51 INFO2 take_data: Starting WAPP+GALFA scan: 815000086 2008-May-29 19:08:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-May-29 19:08:52 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-May-29 19:08:52 LOG5 begin_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2008-May-29 19:08:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-29 19:08:52 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2008-May-29 19:08:52 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-29 19:08:52 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-29 19:08:52 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-29 19:08:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83333.00 2008-May-29 19:08:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-29 19:08:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-29 19:08:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-29 19:08:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-29 19:08:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-29 19:08:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-May-29 19:08:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-May-29 19:08:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-May-29 19:08:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-May-29 19:09:03 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-29 19:09:03 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-May-29 19:09:03 LOG5 end_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2008-May-29 19:09:03 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-May-29 19:09:03 LOG5 end_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2008-May-29 19:09:03 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2008-May-29 19:09:03 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2008-May-29 19:09:03 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2008-May-29 19:09:03 LOG5 antvel: Calling 'antvel 115900.000000 73000.000000 J 0' 2008-May-29 19:09:03 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +07:30:00.0 Epoch = 2008.41286 J 2008-May-29 19:09:03 LOG2 antvel: Computed apparent RA = 11:59:26.9 Dec = +07:27:07.4 2008-May-29 19:09:03 LOG2 antvel: Parameters to Doppler: Topocentric 83343 2008 150 0.0 2008-May-29 19:09:03 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-May-29 19:09:03 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2008-May-29 19:09:03 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2008-May-29 19:09:03 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-May-29 19:09:03 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-May-29 19:09:03 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2008-May-29 19:09:03 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-29 19:09:03 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-May-29 19:09:03 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-May-29 19:09:03 LOG5 begin_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2008-May-29 19:09:03 LOG5 log_alfabeam: Parameters: 11.983333333333333 7.5 11.223300 2008.4128622899079 18.999933 2008-May-29 19:09:03 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333329 7.499999999999995 2008-May-29 19:09:03 LOG4 log_alfabeam: ALFABEAM 1 11.977553919977838 7.562287684711277 2008-May-29 19:09:03 LOG4 log_alfabeam: ALFABEAM 2 11.977557065235811 7.464232561269204 2008-May-29 19:09:03 LOG4 log_alfabeam: ALFABEAM 3 11.983320756447378 7.401628780588970 2008-May-29 19:09:03 LOG4 log_alfabeam: ALFABEAM 4 11.989121095201446 7.437869026960341 2008-May-29 19:09:03 LOG4 log_alfabeam: ALFABEAM 5 11.989106439821555 7.536345270412176 2008-May-29 19:09:03 LOG4 log_alfabeam: ALFABEAM 6 11.983303058339679 7.598158895542008 2008-May-29 19:09:03 INFO2 take_data: Starting WAPP+GALFA scan: 815000087 2008-May-29 19:09:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-May-29 19:09:04 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-May-29 19:09:04 LOG5 begin_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2008-May-29 19:09:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-29 19:09:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2008-May-29 19:09:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-29 19:09:04 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-29 19:09:04 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-29 19:09:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83345.00 2008-May-29 19:09:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-29 19:09:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-29 19:09:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-29 19:09:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-29 19:09:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-29 19:09:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-May-29 19:09:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-May-29 19:09:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-May-29 19:09:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-May-29 19:09:15 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-29 19:09:15 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-May-29 19:09:15 LOG5 end_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2008-May-29 19:09:15 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-May-29 19:09:15 LOG5 end_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2008-May-29 19:09:15 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2008-May-29 19:09:15 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2008-May-29 19:09:15 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2008-May-29 19:09:15 LOG5 antvel: Calling 'antvel 115900.000000 73000.000000 J 0' 2008-May-29 19:09:15 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +07:30:00.0 Epoch = 2008.41286 J 2008-May-29 19:09:15 LOG2 antvel: Computed apparent RA = 11:59:26.9 Dec = +07:27:07.4 2008-May-29 19:09:15 LOG2 antvel: Parameters to Doppler: Topocentric 83355 2008 150 0.0 2008-May-29 19:09:15 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-May-29 19:09:15 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2008-May-29 19:09:15 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2008-May-29 19:09:15 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-May-29 19:09:15 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-May-29 19:09:15 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2008-May-29 19:09:15 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-29 19:09:15 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-May-29 19:09:15 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-May-29 19:09:15 LOG5 begin_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2008-May-29 19:09:15 LOG5 log_alfabeam: Parameters: 11.983333333333333 7.5 11.226642 2008.4128626701649 18.999933 2008-May-29 19:09:15 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333329 7.500000000000003 2008-May-29 19:09:15 LOG4 log_alfabeam: ALFABEAM 1 11.977562728654201 7.562468011057494 2008-May-29 19:09:15 LOG4 log_alfabeam: ALFABEAM 2 11.977552028522622 7.464413501026423 2008-May-29 19:09:15 LOG4 log_alfabeam: ALFABEAM 3 11.983306836295769 7.401629143759303 2008-May-29 19:09:15 LOG4 log_alfabeam: ALFABEAM 4 11.989112332326229 7.437688847976587 2008-May-29 19:09:15 LOG4 log_alfabeam: ALFABEAM 5 11.989111546980823 7.536165828139024 2008-May-29 19:09:15 LOG4 log_alfabeam: ALFABEAM 6 11.983316853986935 7.598159372727860 2008-May-29 19:09:15 INFO2 take_data: Starting WAPP+GALFA scan: 815000088 2008-May-29 19:09:16 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-May-29 19:09:16 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-May-29 19:09:16 LOG5 begin_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2008-May-29 19:09:16 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-29 19:09:16 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2008-May-29 19:09:16 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-29 19:09:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-29 19:09:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-29 19:09:16 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83357.00 2008-May-29 19:09:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-29 19:09:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-29 19:09:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-29 19:09:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-29 19:09:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-29 19:09:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-May-29 19:09:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-May-29 19:09:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-May-29 19:09:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-May-29 19:09:27 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-29 19:09:27 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-May-29 19:09:27 LOG5 end_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2008-May-29 19:09:27 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-May-29 19:09:27 LOG5 end_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2008-May-29 19:09:27 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2008-May-29 19:09:27 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2008-May-29 19:09:27 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2008-May-29 19:09:27 LOG5 antvel: Calling 'antvel 115900.000000 73000.000000 J 0' 2008-May-29 19:09:27 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +07:30:00.0 Epoch = 2008.41286 J 2008-May-29 19:09:27 LOG2 antvel: Computed apparent RA = 11:59:26.9 Dec = +07:27:07.4 2008-May-29 19:09:27 LOG2 antvel: Parameters to Doppler: Topocentric 83367 2008 150 0.0 2008-May-29 19:09:27 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-May-29 19:09:27 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2008-May-29 19:09:27 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2008-May-29 19:09:27 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-May-29 19:09:27 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-May-29 19:09:27 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2008-May-29 19:09:27 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-29 19:09:27 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-May-29 19:09:27 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-May-29 19:09:27 LOG5 begin_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2008-May-29 19:09:27 LOG5 log_alfabeam: Parameters: 11.983333333333333 7.5 11.229985 2008.4128630504219 18.999933 2008-May-29 19:09:27 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333333 7.499999999999999 2008-May-29 19:09:27 LOG4 log_alfabeam: ALFABEAM 1 11.977571606726165 7.562648955655598 2008-May-29 19:09:27 LOG4 log_alfabeam: ALFABEAM 2 11.977546992597516 7.464595496445312 2008-May-29 19:09:27 LOG4 log_alfabeam: ALFABEAM 3 11.983292847124805 7.401629948335900 2008-May-29 19:09:27 LOG4 log_alfabeam: ALFABEAM 4 11.989103500326065 7.437508048296319 2008-May-29 19:09:27 LOG4 log_alfabeam: ALFABEAM 5 11.989116654123739 7.535985332306080 2008-May-29 19:09:27 LOG4 log_alfabeam: ALFABEAM 6 11.983330718330606 7.598159420971829 2008-May-29 19:09:27 INFO2 take_data: Starting WAPP+GALFA scan: 815000089 2008-May-29 19:09:28 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-May-29 19:09:28 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-May-29 19:09:28 LOG5 begin_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2008-May-29 19:09:28 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-29 19:09:28 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2008-May-29 19:09:28 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-29 19:09:28 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-29 19:09:28 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-29 19:09:28 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83369.00 2008-May-29 19:09:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-29 19:09:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-29 19:09:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-29 19:09:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-29 19:09:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-29 19:09:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-May-29 19:09:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-May-29 19:09:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-May-29 19:09:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-May-29 19:09:39 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-29 19:09:39 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-May-29 19:09:39 LOG5 end_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2008-May-29 19:09:39 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-May-29 19:09:39 LOG5 end_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2008-May-29 19:09:39 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2008-May-29 19:09:39 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2008-May-29 19:09:39 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2008-May-29 19:09:39 LOG5 antvel: Calling 'antvel 115900.000000 73000.000000 J 0' 2008-May-29 19:09:39 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +07:30:00.0 Epoch = 2008.41286 J 2008-May-29 19:09:39 LOG2 antvel: Computed apparent RA = 11:59:26.9 Dec = +07:27:07.4 2008-May-29 19:09:39 LOG2 antvel: Parameters to Doppler: Topocentric 83379 2008 150 0.0 2008-May-29 19:09:39 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-May-29 19:09:39 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2008-May-29 19:09:39 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2008-May-29 19:09:39 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-May-29 19:09:39 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-May-29 19:09:39 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2008-May-29 19:09:39 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-29 19:09:39 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-May-29 19:09:39 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-May-29 19:09:39 LOG5 begin_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2008-May-29 19:09:39 LOG5 log_alfabeam: Parameters: 11.983333333333333 7.5 11.233327 2008.412863430679 18.999933 2008-May-29 19:09:39 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333329 7.499999999999996 2008-May-29 19:09:39 LOG4 log_alfabeam: ALFABEAM 1 11.977580549389394 7.562830409390539 2008-May-29 19:09:39 LOG4 log_alfabeam: ALFABEAM 2 11.977541960749917 7.464778443874741 2008-May-29 19:09:39 LOG4 log_alfabeam: ALFABEAM 3 11.983278797072449 7.401631199997695 2008-May-29 19:09:39 LOG4 log_alfabeam: ALFABEAM 4 11.989094603978501 7.437326736906844 2008-May-29 19:09:39 LOG4 log_alfabeam: ALFABEAM 5 11.989121757924059 7.535803885602900 2008-May-29 19:09:39 LOG4 log_alfabeam: ALFABEAM 6 11.983344643310858 7.598159034196388 2008-May-29 19:09:39 INFO2 take_data: Starting WAPP+GALFA scan: 815000090 2008-May-29 19:09:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-May-29 19:09:40 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-May-29 19:09:40 LOG5 begin_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2008-May-29 19:09:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-29 19:09:40 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2008-May-29 19:09:40 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-29 19:09:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-29 19:09:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-29 19:09:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83381.00 2008-May-29 19:09:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-29 19:09:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-29 19:09:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-29 19:09:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-29 19:09:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-29 19:09:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-May-29 19:09:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-May-29 19:09:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-May-29 19:09:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-May-29 19:09:51 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-29 19:09:51 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-May-29 19:09:51 LOG5 end_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2008-May-29 19:09:51 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-May-29 19:09:51 LOG5 end_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2008-May-29 19:09:51 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2008-May-29 19:09:51 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2008-May-29 19:09:51 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2008-May-29 19:09:51 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-May-29 19:09:51 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-May-29 19:09:51 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-May-29 19:09:51 LOG5 begin_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2008-May-29 19:09:51 LOG3 CALCONTROL-caltrig: Software trigger 2008-May-29 19:09:51 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-May-29 19:09:51 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-May-29 19:09:51 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-May-29 19:09:51 LOG5 end_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2008-May-29 19:09:51 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2008-May-29 19:09:51 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2008-May-29 19:09:51 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2008-May-29 19:09:51 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2008-May-29 19:09:51 LOG5 antvel: Calling 'antvel 115900.000000 73000.000000 J 0' 2008-May-29 19:09:51 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +07:30:00.0 Epoch = 2008.41286 J 2008-May-29 19:09:51 LOG2 antvel: Computed apparent RA = 11:59:26.9 Dec = +07:27:07.4 2008-May-29 19:09:51 LOG2 antvel: Parameters to Doppler: Topocentric 83391 2008 150 0.0 2008-May-29 19:09:51 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-May-29 19:09:51 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2008-May-29 19:09:51 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.8