2008-May-28 19:01:30 BEGIN executive: CIMA executive starting ... 2008-May-28 19:01:30 NOTE executive: STARTING NEW CIMA SESSION 2008-May-28 19:01:30 INFO1 executive: Using CIMA version 2.3.xx 'unusable' from 2008-05-28 17:46 2008-May-28 19:01:30 INFO4 executive: This is an ON-LINE session 2008-May-28 19:01:30 INFO4 executive: This is a REMOTE session 2008-May-28 19:01:30 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2008-May-28 19:01:30 INFO1 executive: CIMA session for project 'a2048' in 'line' mode for 'SS&WvD' 2008-May-28 19:01:30 INFO2 executive: Logging to '/share/obs4/usr/a2048/a2048.cimalog_20080528' 2008-May-28 19:01:31 LOG2 log_preferences: Currently applied preferences: 2008-May-28 19:01:31 LOG2 log_preferences: prefs(dailylog) = daily 2008-May-28 19:01:31 LOG2 log_preferences: prefs(offlinelog) = skip 2008-May-28 19:01:31 LOG2 log_preferences: prefs(datawindow) = ignore 2008-May-28 19:01:31 LOG2 log_preferences: prefs(limitwarning) = enabled 2008-May-28 19:01:31 LOG2 log_preferences: prefs(wappfailure) = abort 2008-May-28 19:01:31 LOG2 log_preferences: prefs(helpstyle) = stay-open 2008-May-28 19:01:31 LOG2 log_preferences: prefs(logcolours) = full 2008-May-28 19:01:31 LOG2 log_preferences: prefs(displaylevel) = INFO3 2008-May-28 19:01:31 LOG2 log_preferences: prefs(loglevel) = LOG5 2008-May-28 19:01:31 LOG2 log_preferences: prefs(displayformat) = short 2008-May-28 19:01:31 LOG2 log_preferences: prefs(logformat) = new 2008-May-28 19:01:31 LOG2 log_preferences: prefs(fontsize) = 4 2008-May-28 19:01:31 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2008-May-28 19:01:31 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2048 2008-May-28 19:01:31 ALERT executive: CIMA executive ready 2008-May-28 19:01:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-28 19:01:34 LOG4 got_cormsg: From DATATAKING: setup 2008-May-28 19:01:34 NOTE frontend: CIMA frontend ready 2008-May-28 19:01:40 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0x300002 2008-May-28 19:01:40 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0x300002' 2008-May-28 19:01:40 LOG4 got_cormsg: From DATATAKING: vw% io 2008-May-28 19:01:40 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2008-May-28 19:01:40 LOG4 got_cormsg: From DATATAKING: 2008-May-28 19:01:40 LOG4 got_cormsg: From DATATAKING: vw% tape stat 2008-May-28 19:01:40 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2008-May-28 19:01:40 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2008-May-28 19:01:40 LOG4 got_cormsg: From DATATAKING: vw% connectall 2008-May-28 19:01:40 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2008-May-28 19:01:40 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2008-May-28 19:01:40 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2008-May-28 19:01:40 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2008-May-28 19:01:40 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2008-May-28 19:01:40 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2008-May-28 19:01:40 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2008-May-28 19:01:40 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2008-May-28 19:01:40 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2048 2008-May-28 19:01:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-28 19:01:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-28 19:01:53 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2008-May-28 19:01:53 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2008-May-28 19:01:53 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2008-May-28 19:01:53 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2008-May-28 19:01:53 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-May-28 19:01:53 NOTE select_receiver: Starting to select receiver ALFA 2008-May-28 19:01:53 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-May-28 19:01:53 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-May-28 19:01:53 LOG3 vw_send: To DATATAKING: acvlbical off 2008-May-28 19:01:53 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-May-28 19:01:53 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-May-28 19:01:53 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-May-28 19:01:53 DONE finish_task: DONE finished selecting: receiver ALFA 2008-May-28 19:01:53 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-May-28 19:01:53 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-May-28 19:01:53 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-May-28 19:01:53 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-May-28 19:01:53 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-May-28 19:02:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-28 19:02:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-28 19:02:03 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2008-May-28 19:02:03 LOG4 exec_msg: From OBSERVER: restart_wapp 2008-May-28 19:02:03 LOG5 restart_wapp: Calling 'restart_wapp' 2008-May-28 19:02:03 BEGIN begin_task: Starting task 'restarting the WAPPs' 2008-May-28 19:02:03 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-May-28 19:02:03 NOTE restart_wapp: Restarting all WAPPs 2008-May-28 19:02:03 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2008-May-28 19:02:03 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2008-May-28 19:02:03 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-May-28 19:02:03 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-May-28 19:02:07 ALERT WAPP=1-wappcon: WAPP1 restarting 2008-May-28 19:02:07 ALERT WAPP=2-wappcon: WAPP2 restarting 2008-May-28 19:02:07 ALERT WAPP=3-wappcon: WAPP3 restarting 2008-May-28 19:02:07 ALERT WAPP=4-wappcon: WAPP4 restarting 2008-May-28 19:02:49 INFO1 CIMA-run_command_file: Transferring command file 'command_galfasrc.cmd ' to executive ... 2008-May-28 19:02:49 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 5 {LOAD togs_ages.conf} 2008-May-28 19:02:49 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 6 {CATALOG togs_ages.cat} 2008-May-28 19:02:49 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {IF lst < 10 then GOTO galfasrc} 2008-May-28 19:02:49 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {IF lst >= 10 then GOTO galfasrc2} 2008-May-28 19:02:49 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {ALFAANGLE 19} 2008-May-28 19:02:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 10 {WAITTRACK} 2008-May-28 19:02:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 14 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2008-May-28 19:02:50 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-May-28 19:02:50 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc.cmd 1 1 7 2008-May-28 19:02:50 LOG4 run_command_file: Calling 'run_command_file command_galfasrc.cmd 1 1 7' 2008-May-28 19:02:50 BEGIN begin_task: Starting task 'running command file 'command_galfasrc.cmd'' 2008-May-28 19:02:50 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-May-28 19:02:50 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc.cmd' ...} 2008-May-28 19:02:50 NOTE run_command_file: Starting execution of command file 'command_galfasrc.cmd' from line 1 2008-May-28 19:02:50 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_ages.conf' 2008-May-28 19:02:50 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2008-May-28 19:02:50 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-May-28 19:02:50 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2008-May-28 19:02:50 NOTE CIMA-load_config_file: Loading configuration file 'togs_ages.conf' 2008-May-28 19:02:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-May-28 19:02:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-May-28 19:02:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-May-28 19:02:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-May-28 19:02:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-May-28 19:02:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2008-May-28 19:02:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-May-28 19:02:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1381.2" 2008-May-28 19:02:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1381.2" 2008-May-28 19:02:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1381.2" 2008-May-28 19:02:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1381.2" 2008-May-28 19:02:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1381.2" 2008-May-28 19:02:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1381.2" 2008-May-28 19:02:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1381.2" 2008-May-28 19:02:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1381.2" 2008-May-28 19:02:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1381.2" 2008-May-28 19:02:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-May-28 19:02:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-May-28 19:02:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-May-28 19:02:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-May-28 19:02:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-May-28 19:02:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-May-28 19:02:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-May-28 19:02:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-May-28 19:02:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-May-28 19:02:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-May-28 19:02:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-May-28 19:02:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-May-28 19:02:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-May-28 19:02:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2008-May-28 19:02:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-May-28 19:02:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-May-28 19:02:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-May-28 19:02:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-May-28 19:02:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-May-28 19:02:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-May-28 19:02:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-May-28 19:02:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-May-28 19:02:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-May-28 19:02:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1631.200000" 2008-May-28 19:02:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-May-28 19:02:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-May-28 19:02:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-May-28 19:02:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-May-28 19:02:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-May-28 19:02:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-May-28 19:02:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-May-28 19:02:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-May-28 19:02:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-May-28 19:02:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-May-28 19:02:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-May-28 19:02:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-May-28 19:02:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-May-28 19:02:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-May-28 19:02:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-May-28 19:02:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-May-28 19:02:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-May-28 19:02:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-May-28 19:02:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-May-28 19:02:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-May-28 19:02:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-May-28 19:02:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-May-28 19:02:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-May-28 19:02:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-May-28 19:02:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-May-28 19:02:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-May-28 19:02:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-May-28 19:02:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-May-28 19:02:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-May-28 19:02:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-May-28 19:02:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-May-28 19:02:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-May-28 19:02:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-May-28 19:02:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-May-28 19:02:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-May-28 19:02:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-May-28 19:02:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-May-28 19:02:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-May-28 19:02:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-May-28 19:02:52 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-May-28 19:02:52 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-May-28 19:02:52 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-May-28 19:02:52 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-May-28 19:02:52 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-May-28 19:02:52 INFO1 config_iflo: Selecting receiver ALFA 2008-May-28 19:02:52 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2008-May-28 19:02:52 LOG1 select_receiver: Calling 'select_receiver alfa no no no' 2008-May-28 19:02:52 START begin_task: Starting task 'selecting receiver ALFA' 2008-May-28 19:02:52 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-May-28 19:02:52 NOTE select_receiver: Starting to select receiver ALFA 2008-May-28 19:02:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-May-28 19:02:52 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-May-28 19:02:52 LOG3 vw_send: To DATATAKING: acvlbical off 2008-May-28 19:02:52 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-May-28 19:02:52 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-May-28 19:02:52 LOG5 finish_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-May-28 19:02:52 INFO2 finish_task: DONE finished selecting: receiver ALFA 2008-May-28 19:02:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-May-28 19:02:52 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-May-28 19:02:52 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-May-28 19:02:52 START begin_task: Starting task 'waiting for receiver ALFA' 2008-May-28 19:02:52 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2008-May-28 19:02:52 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2008-May-28 19:02:52 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2008-May-28 19:02:52 INFO1 config_iflo: Configuring rest of the IF/LO path 2008-May-28 19:02:52 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2008-May-28 19:02:52 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-May-28 19:02:52 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-May-28 19:02:52 START begin_task: Starting task 'waiting on command to ALFA' 2008-May-28 19:02:52 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2008-May-28 19:02:52 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-May-28 19:02:52 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-May-28 19:02:52 LOG4 got_alfamon: From ALFAMON: ACK 2008-May-28 19:02:52 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-May-28 19:02:52 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2008-May-28 19:02:52 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-May-28 19:02:52 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-May-28 19:02:52 LOG3 vw_send: To DATATAKING: alfafb 1 2008-May-28 19:02:52 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2008-May-28 19:02:52 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-May-28 19:02:52 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-May-28 19:02:52 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2008-May-28 19:02:52 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2008-May-28 19:02:53 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2008-May-28 19:02:53 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2008-May-28 19:02:53 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2008-May-28 19:02:53 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2008-May-28 19:02:53 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-May-28 19:02:53 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-May-28 19:02:53 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-May-28 19:02:53 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-May-28 19:02:53 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-May-28 19:02:53 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2008-May-28 19:02:53 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2008-May-28 19:02:53 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2008-May-28 19:02:53 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2008-May-28 19:02:53 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-May-28 19:02:53 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2008-May-28 19:02:53 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-May-28 19:02:53 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-May-28 19:02:53 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-28 19:02:53 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-May-28 19:02:53 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2008-May-28 19:02:53 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-May-28 19:02:53 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2008-May-28 19:02:53 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2008-May-28 19:02:53 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-May-28 19:02:53 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-May-28 19:02:53 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-May-28 19:02:53 LOG5 begin_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2008-May-28 19:02:53 LOG4 got_cormsg: From DATATAKING: alfafb 1 2008-May-28 19:02:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2008-May-28 19:02:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2008-May-28 19:02:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2008-May-28 19:02:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2008-May-28 19:02:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2008-May-28 19:02:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2008-May-28 19:02:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2008-May-28 19:02:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2008-May-28 19:02:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2008-May-28 19:02:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2008-May-28 19:02:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2008-May-28 19:02:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-May-28 19:02:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2008-May-28 19:02:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-May-28 19:02:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-28 19:02:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-May-28 19:02:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2008-May-28 19:02:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2008-May-28 19:02:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2008-May-28 19:02:53 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-May-28 19:02:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-28 19:02:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-28 19:03:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-28 19:03:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-28 19:03:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-28 19:03:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-28 19:03:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-28 19:03:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-28 19:03:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-28 19:03:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-28 19:03:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-28 19:03:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-28 19:03:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-28 19:03:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-28 19:03:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-28 19:03:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-28 19:03:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-28 19:03:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-28 19:03:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-28 19:03:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-28 19:03:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-28 19:03:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-28 19:03:08 LOG4 got_cormsg: From DATATAKING: DONE 2008-May-28 19:03:08 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-May-28 19:03:08 LOG5 end_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2008-May-28 19:03:08 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-May-28 19:03:08 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-May-28 19:03:08 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-May-28 19:03:08 DONE finish_task: DONE finished configuration: IF/LO path 2008-May-28 19:03:08 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-May-28 19:03:08 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-May-28 19:03:08 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-May-28 19:03:08 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-May-28 19:03:08 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-May-28 19:03:08 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-May-28 19:03:08 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-May-28 19:03:08 START begin_task: Starting task 'selecting calibration port' 2008-May-28 19:03:08 LOG5 begin_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-May-28 19:03:08 LOG3 vw_send: To DATATAKING: calport 3 2008-May-28 19:03:08 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-May-28 19:03:09 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-May-28 19:03:09 START begin_task: Starting task 'waiting on calport' 2008-May-28 19:03:09 LOG5 begin_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2008-May-28 19:03:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-28 19:03:09 LOG4 got_cormsg: From DATATAKING: calport 3 2008-May-28 19:03:09 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-May-28 19:03:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-28 19:03:09 LOG4 got_cormsg: From DATATAKING: DONE 2008-May-28 19:03:09 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-May-28 19:03:09 LOG5 end_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2008-May-28 19:03:09 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-May-28 19:03:09 STOP finish_task: Finishing task 'selecting calibration port' 2008-May-28 19:03:09 LOG5 finish_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-May-28 19:03:09 INFO2 finish_task: DONE finished configuring: calibration port 2008-May-28 19:03:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-May-28 19:03:09 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-May-28 19:03:09 LOG5 end_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-May-28 19:03:09 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-May-28 19:03:09 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-May-28 19:03:09 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-May-28 19:03:09 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-May-28 19:03:09 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-May-28 19:03:09 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-May-28 19:03:09 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-May-28 19:03:09 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-May-28 19:03:09 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 SS&WvD 2008-May-28 19:03:09 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 SS&WvD 2008-May-28 19:03:09 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 SS&WvD 2008-May-28 19:03:09 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 SS&WvD 2008-May-28 19:03:09 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-May-28 19:03:09 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-May-28 19:03:09 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-May-28 19:03:09 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2008-May-28 19:03:09 LOG3 CALCONTROL-caltrig: Software trigger 2008-May-28 19:03:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-28 19:03:09 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-May-28 19:03:09 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-May-28 19:03:09 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-May-28 19:03:09 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2008-May-28 19:03:09 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 SS&WvD 2008-May-28 19:03:09 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 SS&WvD 2008-May-28 19:03:09 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 SS&WvD 2008-May-28 19:03:09 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 SS&WvD 2008-May-28 19:03:09 STOP finish_task: Finishing task 'configuring WAPPs' 2008-May-28 19:03:09 LOG5 finish_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-May-28 19:03:09 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-May-28 19:03:09 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-May-28 19:03:09 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-May-28 19:03:09 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-May-28 19:03:09 COMMAND run_command_line: EXECUTING command 6: 'CATALOG togs_ages.cat' 2008-May-28 19:03:09 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/togs_ages.cat' 2008-May-28 19:03:10 COMMAND run_command_line: EXECUTING command 7: 'IF lst < 10 then GOTO galfasrc' 2008-May-28 19:03:10 INFO5 is_if_valid: Evaluating condition: LST < 10 2008-May-28 19:03:10 INFO5 is_if_valid: Condition parsed as: 11.058988 < 10 2008-May-28 19:03:10 INFO1 is_if_valid: Skipping line 'IF lst < 10 then GOTO galfasrc' 2008-May-28 19:03:10 COMMAND run_command_line: EXECUTING command 8: 'IF lst >= 10 then GOTO galfasrc2' 2008-May-28 19:03:10 INFO5 is_if_valid: Evaluating condition: LST >= 10 2008-May-28 19:03:10 INFO5 is_if_valid: Condition parsed as: 11.058988 >= 10 2008-May-28 19:03:10 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2048/togs_ages.cat galfasrc2 nooffset nowait' 2008-May-28 19:03:10 BEGIN begin_task: Starting task 'tracking source 'galfasrc2'' 2008-May-28 19:03:10 LOG5 begin_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2008-May-28 19:03:10 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc2' ...} 2008-May-28 19:03:10 LOG3 track_source: Calling 'track_source galfasrc2 115900.0 +073000 J 0.0 0.0 main small /share/obs4/usr/a2048/togs_ages.cat 0 Topocentric velocity(optical)' 2008-May-28 19:03:10 START begin_task: Starting task 'sending tracking commands' 2008-May-28 19:03:10 LOG5 begin_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2008-May-28 19:03:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc2} INFO {Slewing to source 'galfasrc2' ...} 2008-May-28 19:03:10 INFO1 track_source: Starting to track galfasrc2 2008-May-28 19:03:10 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc2" 2008-May-28 19:03:10 LOG3 vw_send: To DATATAKING: set ra 115900.0 2008-May-28 19:03:10 LOG3 vw_send: To DATATAKING: set dec +073000 2008-May-28 19:03:10 LOG3 vw_send: To DATATAKING: pnt tr send 2008-May-28 19:03:10 LOG3 vw_send: To DATATAKING: pnt tr 115900.0 +073000 -CJ 2008-May-28 19:03:10 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-May-28 19:03:10 STOP finish_task: Finishing task 'sending tracking commands' 2008-May-28 19:03:10 LOG5 finish_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2008-May-28 19:03:10 INFO2 finish_task: DONE finished sending: tracking commands 2008-May-28 19:03:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-May-28 19:03:10 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-May-28 19:03:10 LOG5 end_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2008-May-28 19:03:10 STOP finish_task: Finishing task 'tracking source 'galfasrc2'' 2008-May-28 19:03:10 LOG5 finish_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2008-May-28 19:03:10 DONE finish_task: DONE finished tracking: source 'galfasrc2' 2008-May-28 19:03:10 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-May-28 19:03:10 END end_task: Finishing task 'tracking source 'galfasrc2'' with status 'OK' 2008-May-28 19:03:10 LOG5 end_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2008-May-28 19:03:10 COMMAND run_command_line: EXECUTING command 9: 'ALFAANGLE 19' 2008-May-28 19:03:10 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2008-May-28 19:03:10 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-May-28 19:03:10 LOG5 begin_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2008-May-28 19:03:10 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-May-28 19:03:10 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-May-28 19:03:10 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-May-28 19:03:10 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-May-28 19:03:10 START begin_task: Starting task 'waiting on ALFA rotation' 2008-May-28 19:03:10 LOG5 begin_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2008-May-28 19:03:10 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 SS&WvD' 2008-May-28 19:03:10 NOTE WAPPDATA-new_file: New FITS file: wapp.20080528.a2048.0000.fits 2008-May-28 19:03:10 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc2" 2008-May-28 19:03:10 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-May-28 19:03:10 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-May-28 19:03:10 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20080528.a2048.0000.fits} 2008-May-28 19:03:10 LOG4 got_cormsg: From DATATAKING: set ra 115900.0 2008-May-28 19:03:10 LOG4 got_cormsg: From DATATAKING: set dec +073000 2008-May-28 19:03:10 LOG4 got_cormsg: From DATATAKING: vw% 115900.0 2008-May-28 19:03:10 LOG4 got_cormsg: From DATATAKING: vw% +073000 2008-May-28 19:03:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-28 19:03:10 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-May-28 19:03:10 LOG4 got_cormsg: From DATATAKING: pnt tr 115900.0 +073000 -CJ 2008-May-28 19:03:10 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-May-28 19:03:10 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-May-28 19:03:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-28 19:03:11 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 SS&WvD' 2008-May-28 19:03:11 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-May-28 19:03:11 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-May-28 19:03:11 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-May-28 19:03:11 LOG5 end_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2008-May-28 19:03:11 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-May-28 19:03:11 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-May-28 19:03:11 LOG5 finish_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2008-May-28 19:03:11 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-May-28 19:03:11 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-May-28 19:03:11 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-May-28 19:03:11 LOG5 end_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2008-May-28 19:03:11 COMMAND run_command_line: EXECUTING command 10: 'WAITTRACK' 2008-May-28 19:03:11 BEGIN begin_task: Starting task 'waiting on telescope' 2008-May-28 19:03:11 LOG5 begin_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2008-May-28 19:03:11 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-May-28 19:03:11 LOG3 waittrk: Start waittrk 5 2008-May-28 19:03:11 START begin_task: Starting task 'waiting on telescope movement' 2008-May-28 19:03:11 LOG5 begin_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2008-May-28 19:03:16 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-May-28 19:03:16 LOG5 end_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2008-May-28 19:03:17 START begin_task: Starting task 'waiting on telescope on source' 2008-May-28 19:03:17 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2008-May-28 19:07:51 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-May-28 19:07:51 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2008-May-28 19:07:51 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-May-28 19:07:51 INFO2 waittrk: Now tracking galfasrc2 2008-May-28 19:07:51 LOG4 waittrk: Current telescope position: Az = 309.18 ZA = 16.55 2008-May-28 19:07:51 STOP finish_task: Finishing task 'waiting on telescope' 2008-May-28 19:07:51 LOG5 finish_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2008-May-28 19:07:51 DONE finish_task: DONE finished waiting: telescope on source 2008-May-28 19:07:51 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-May-28 19:07:51 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-May-28 19:07:51 LOG5 end_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2008-May-28 19:07:51 COMMAND run_command_line: EXECUTING command 14: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2008-May-28 19:07:51 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2008-May-28 19:07:52 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-May-28 19:07:52 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first 0 {1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2008-May-28 19:07:52 BEGIN begin_task: Starting task 'smart frequency switching' 2008-May-28 19:07:52 LOG5 begin_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2008-May-28 19:07:52 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'galfasrc2' 2008-May-28 19:07:52 INFO1 smartfreq: Starting pattern: Smart frequency switching 2008-May-28 19:07:52 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2008-May-28 19:07:52 START begin_task: Starting task 'selecting calibration type' 2008-May-28 19:07:52 LOG5 begin_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2008-May-28 19:07:52 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-May-28 19:07:52 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-May-28 19:07:52 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-May-28 19:07:52 START begin_task: Starting task 'waiting on setcal' 2008-May-28 19:07:52 LOG5 begin_task: Level: (4) ID = <10022> Status = 0 0 0 0 ok 2008-May-28 19:07:52 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-May-28 19:07:52 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-May-28 19:07:52 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-28 19:07:52 LOG4 got_cormsg: From DATATAKING: DONE 2008-May-28 19:07:52 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-May-28 19:07:52 LOG5 end_task: Level: (4) ID = <10022> Status = 0 0 0 0 ok 2008-May-28 19:07:52 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-May-28 19:07:52 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-May-28 19:07:52 LOG3 socket_wait: To ALFAMON: CAL HI 2008-May-28 19:07:52 START begin_task: Starting task 'waiting on command to ALFA' 2008-May-28 19:07:52 LOG5 begin_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2008-May-28 19:07:52 LOG4 got_alfamon: From ALFAMON: ACK 2008-May-28 19:07:52 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-May-28 19:07:52 LOG5 end_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2008-May-28 19:07:52 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-May-28 19:07:52 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-May-28 19:07:52 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-May-28 19:07:53 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-May-28 19:07:53 START begin_task: Starting task 'waiting on command to ALFA' 2008-May-28 19:07:53 LOG5 begin_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2008-May-28 19:07:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-28 19:07:53 LOG4 got_alfamon: From ALFAMON: ACK 2008-May-28 19:07:53 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-May-28 19:07:53 LOG5 end_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2008-May-28 19:07:53 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-May-28 19:07:53 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-May-28 19:07:53 STOP finish_task: Finishing task 'selecting calibration type' 2008-May-28 19:07:53 LOG5 finish_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2008-May-28 19:07:53 INFO2 finish_task: DONE finished configuring: calibration type 2008-May-28 19:07:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-May-28 19:07:53 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-May-28 19:07:53 LOG5 end_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2008-May-28 19:07:53 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 SS&WvD 2008-May-28 19:07:53 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 SS&WvD 2008-May-28 19:07:53 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 SS&WvD 2008-May-28 19:07:53 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 SS&WvD 2008-May-28 19:07:53 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20080528.a2048.0000.fits' is empty! 2008-May-28 19:07:53 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2008-May-28 19:07:53 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-May-28 19:07:53 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2008-May-28 19:07:53 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-May-28 19:07:53 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-May-28 19:07:53 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-May-28 19:07:53 LOG5 begin_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2008-May-28 19:07:53 LOG3 CALCONTROL-caltrig: Software trigger 2008-May-28 19:07:53 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-May-28 19:07:53 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-May-28 19:07:53 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-May-28 19:07:53 LOG5 end_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2008-May-28 19:07:53 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2008-May-28 19:07:53 START begin_task: Starting task 'adjusting WAPP power' 2008-May-28 19:07:53 LOG5 begin_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-May-28 19:07:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-May-28 19:07:53 INFO2 adjust_power: Starting to adjust WAPP power 2008-May-28 19:07:53 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-May-28 19:07:53 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-May-28 19:07:53 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-May-28 19:07:53 START begin_task: Starting task 'waiting on adjpwrif2' 2008-May-28 19:07:53 LOG5 begin_task: Level: (4) ID = <10027> Status = 0 0 0 0 ok 2008-May-28 19:07:53 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-May-28 19:07:53 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-May-28 19:07:53 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 SS&WvD' 2008-May-28 19:07:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-28 19:07:56 LOG4 got_cormsg: From DATATAKING: DONE 2008-May-28 19:07:56 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-May-28 19:07:56 LOG5 end_task: Level: (4) ID = <10027> Status = 0 0 0 0 ok 2008-May-28 19:07:56 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-May-28 19:07:56 START begin_task: Starting task 'adjusting WAPP power' 2008-May-28 19:07:56 LOG5 begin_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2008-May-28 19:07:56 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-May-28 19:07:56 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-May-28 19:07:56 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-May-28 19:07:56 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-May-28 19:07:56 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-May-28 19:07:56 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-May-28 19:07:56 LOG5 begin_task: Level: (5) ID = <10029> Status = 0 0 0 0 ok 2008-May-28 19:07:56 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-May-28 19:07:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-28 19:07:57 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 6 dB --- beam 1: 7 6 dB 2008-May-28 19:07:57 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 3 dB --- beam 5: 6 6 dB 2008-May-28 19:07:57 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-May-28 19:07:57 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 2 2 dB 2008-May-28 19:07:57 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-May-28 19:07:57 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-May-28 19:07:57 LOG5 end_task: Level: (5) ID = <10029> Status = 0 0 0 0 ok 2008-May-28 19:07:57 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.102 1.009 ALFA beam 1: 1.071 1.034 2008-May-28 19:07:57 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.945 0.964 ALFA beam 3: 0.952 1.047 2008-May-28 19:07:57 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.003 0.946 ALFA beam 5: 0.978 0.914 2008-May-28 19:07:57 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.919 0.942 ALFA beam 7: 1.009 1.042 2008-May-28 19:07:57 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-May-28 19:07:57 LOG5 finish_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2008-May-28 19:07:57 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-May-28 19:07:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-May-28 19:07:57 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-May-28 19:07:57 LOG5 end_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2008-May-28 19:07:57 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-May-28 19:07:57 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-May-28 19:07:57 LOG5 finish_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-May-28 19:07:57 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-May-28 19:07:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-May-28 19:07:57 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-May-28 19:07:57 LOG5 end_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-May-28 19:07:57 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2008-May-28 19:07:57 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2008-May-28 19:07:57 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2008-May-28 19:07:57 LOG5 antvel: Calling 'antvel 115900.000000 73000.000000 J 0' 2008-May-28 19:07:57 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +07:30:00.0 Epoch = 2008.41012 J 2008-May-28 19:07:57 LOG2 antvel: Computed apparent RA = 11:59:26.9 Dec = +07:27:07.3 2008-May-28 19:07:57 LOG2 antvel: Parameters to Doppler: Topocentric 83276 2008 149 0.0 2008-May-28 19:07:57 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-May-28 19:07:57 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2008-May-28 19:07:57 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2008-May-28 19:07:57 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-May-28 19:07:57 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-May-28 19:07:57 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2008-May-28 19:07:57 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-28 19:07:57 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-May-28 19:07:57 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-May-28 19:07:57 LOG5 begin_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2008-May-28 19:07:57 LOG5 log_alfabeam: Parameters: 11.983333333333333 7.5 11.138928 2008.4101223160189 18.999933 2008-May-28 19:07:57 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333329 7.499999999999999 2008-May-28 19:07:57 LOG4 log_alfabeam: ALFABEAM 1 11.977352180892895 7.557923512169873 2008-May-28 19:07:57 LOG4 log_alfabeam: ALFABEAM 2 11.977684234840064 7.459980656901079 2008-May-28 19:07:57 LOG4 log_alfabeam: ALFABEAM 3 11.983651426482350 7.401748525475242 2008-May-28 19:07:57 LOG4 log_alfabeam: ALFABEAM 4 11.989321760533302 7.442228769846563 2008-May-28 19:07:57 LOG4 log_alfabeam: ALFABEAM 5 11.988977723360813 7.540560085670426 2008-May-28 19:07:57 LOG4 log_alfabeam: ALFABEAM 6 11.982975428384931 7.598021656309803 2008-May-28 19:07:57 INFO2 take_data: Starting WAPP+GALFA scan: 814900087 2008-May-28 19:07:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-May-28 19:07:58 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-May-28 19:07:58 LOG5 begin_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2008-May-28 19:07:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-28 19:07:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2008-May-28 19:07:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-28 19:07:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-28 19:07:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-28 19:07:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83279.00 2008-May-28 19:08:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-28 19:08:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-28 19:08:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-28 19:08:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-28 19:08:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-28 19:08:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1170.000000 MHz 2008-May-28 19:08:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 970.000000 MHz 2008-May-28 19:08:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-May-28 19:08:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2008-May-28 19:08:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-May-28 19:08:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-May-28 19:08:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-May-28 19:08:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-May-28 19:08:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-May-28 19:08:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-May-28 19:08:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-May-28 19:08:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-May-28 19:08:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-May-28 19:08:04 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-May-28 19:08:04 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-May-28 19:08:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-May-28 19:08:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-May-28 19:08:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-May-28 19:08:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-May-28 19:08:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-May-28 19:08:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-May-28 19:08:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-May-28 19:08:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-May-28 19:08:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-May-28 19:08:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-28 19:08:09 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-May-28 19:08:09 LOG5 end_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2008-May-28 19:08:09 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-May-28 19:08:09 LOG5 end_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2008-May-28 19:08:09 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2008-May-28 19:08:09 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2008-May-28 19:08:09 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2008-May-28 19:08:09 LOG5 antvel: Calling 'antvel 115900.000000 73000.000000 J 0' 2008-May-28 19:08:09 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +07:30:00.0 Epoch = 2008.41012 J 2008-May-28 19:08:09 LOG2 antvel: Computed apparent RA = 11:59:26.9 Dec = +07:27:07.3 2008-May-28 19:08:09 LOG2 antvel: Parameters to Doppler: Topocentric 83289 2008 149 0.0 2008-May-28 19:08:09 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-May-28 19:08:09 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2008-May-28 19:08:09 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2008-May-28 19:08:09 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-May-28 19:08:09 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-May-28 19:08:09 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2008-May-28 19:08:09 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-28 19:08:09 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-May-28 19:08:09 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-May-28 19:08:09 LOG5 begin_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2008-May-28 19:08:09 LOG5 log_alfabeam: Parameters: 11.983333333333333 7.5 11.142549 2008.4101227279641 18.999933 2008-May-28 19:08:09 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333331 7.499999999999999 2008-May-28 19:08:09 LOG4 log_alfabeam: ALFABEAM 1 11.977360074948077 7.558103358034822 2008-May-28 19:08:09 LOG4 log_alfabeam: ALFABEAM 2 11.977678800868690 7.460151216065650 2008-May-28 19:08:09 LOG4 log_alfabeam: ALFABEAM 3 11.983638027718758 7.401738878436244 2008-May-28 19:08:09 LOG4 log_alfabeam: ALFABEAM 4 11.989313909404242 7.442049138264578 2008-May-28 19:08:09 LOG4 log_alfabeam: ALFABEAM 5 11.988983215172230 7.540391084805738 2008-May-28 19:08:09 LOG4 log_alfabeam: ALFABEAM 6 11.982988700994936 7.598031918454011 2008-May-28 19:08:09 INFO2 take_data: Starting WAPP+GALFA scan: 814900088 2008-May-28 19:08:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-May-28 19:08:10 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-May-28 19:08:10 LOG5 begin_task: Level: (4) ID = <10033> Status = 0 0 0 0 ok 2008-May-28 19:08:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-28 19:08:10 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2008-May-28 19:08:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-May-28 19:08:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-May-28 19:08:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-May-28 19:08:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-28 19:08:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-28 19:08:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-28 19:08:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83291.00 2008-May-28 19:08:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-28 19:08:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-28 19:08:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-28 19:08:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-28 19:08:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-28 19:08:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1170.000000 MHz 2008-May-28 19:08:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 970.000000 MHz 2008-May-28 19:08:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-May-28 19:08:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2008-May-28 19:08:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-May-28 19:08:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-May-28 19:08:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-May-28 19:08:13 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-May-28 19:08:13 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-May-28 19:08:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-May-28 19:08:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-May-28 19:08:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-May-28 19:08:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-May-28 19:08:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-May-28 19:08:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-May-28 19:08:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-May-28 19:08:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-May-28 19:08:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-May-28 19:08:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-May-28 19:08:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-May-28 19:08:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-May-28 19:08:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-May-28 19:08:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-May-28 19:08:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-May-28 19:08:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-May-28 19:08:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-May-28 19:08:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-May-28 19:08:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-May-28 19:08:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-28 19:08:21 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-May-28 19:08:21 LOG5 end_task: Level: (4) ID = <10033> Status = 0 0 0 0 ok 2008-May-28 19:08:21 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-May-28 19:08:21 LOG5 end_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2008-May-28 19:08:21 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2008-May-28 19:08:21 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2008-May-28 19:08:21 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2008-May-28 19:08:21 LOG5 antvel: Calling 'antvel 115900.000000 73000.000000 J 0' 2008-May-28 19:08:21 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +07:30:00.0 Epoch = 2008.41012 J 2008-May-28 19:08:21 LOG2 antvel: Computed apparent RA = 11:59:26.9 Dec = +07:27:07.3 2008-May-28 19:08:21 LOG2 antvel: Parameters to Doppler: Topocentric 83301 2008 149 0.0 2008-May-28 19:08:21 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-May-28 19:08:21 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2008-May-28 19:08:21 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2008-May-28 19:08:21 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-May-28 19:08:21 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-May-28 19:08:21 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2008-May-28 19:08:21 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-28 19:08:21 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-May-28 19:08:21 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-May-28 19:08:21 LOG5 begin_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2008-May-28 19:08:21 LOG5 log_alfabeam: Parameters: 11.983333333333333 7.5 11.145892 2008.4101231082211 18.999933 2008-May-28 19:08:21 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333336 7.500000000000003 2008-May-28 19:08:21 LOG4 log_alfabeam: ALFABEAM 1 11.977367420154389 7.558269988803352 2008-May-28 19:08:21 LOG4 log_alfabeam: ALFABEAM 2 11.977673780572403 7.460309589197112 2008-May-28 19:08:21 LOG4 log_alfabeam: ALFABEAM 3 11.983625596533235 7.401730290829584 2008-May-28 19:08:21 LOG4 log_alfabeam: ALFABEAM 4 11.989306604071846 7.441882703668414 2008-May-28 19:08:21 LOG4 log_alfabeam: ALFABEAM 5 11.988988289505402 7.540234153338907 2008-May-28 19:08:21 LOG4 log_alfabeam: ALFABEAM 6 11.983001015353283 7.598041083947111 2008-May-28 19:08:21 INFO2 take_data: Starting WAPP+GALFA scan: 814900089 2008-May-28 19:08:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-May-28 19:08:22 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-May-28 19:08:22 LOG5 begin_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2008-May-28 19:08:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-28 19:08:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2008-May-28 19:08:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-28 19:08:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-28 19:08:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-28 19:08:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83303.00 2008-May-28 19:08:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-28 19:08:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-28 19:08:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-28 19:08:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-28 19:08:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-28 19:08:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1170.000000 MHz 2008-May-28 19:08:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 970.000000 MHz 2008-May-28 19:08:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-May-28 19:08:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2008-May-28 19:08:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-May-28 19:08:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-May-28 19:08:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-May-28 19:08:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-May-28 19:08:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-May-28 19:08:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-May-28 19:08:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-May-28 19:08:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-May-28 19:08:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-May-28 19:08:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-May-28 19:08:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-May-28 19:08:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-May-28 19:08:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-May-28 19:08:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-May-28 19:08:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-May-28 19:08:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-May-28 19:08:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-May-28 19:08:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-28 19:08:33 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-May-28 19:08:33 LOG5 end_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2008-May-28 19:08:33 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-May-28 19:08:33 LOG5 end_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2008-May-28 19:08:33 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2008-May-28 19:08:33 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2008-May-28 19:08:33 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2008-May-28 19:08:33 LOG5 antvel: Calling 'antvel 115900.000000 73000.000000 J 0' 2008-May-28 19:08:33 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +07:30:00.0 Epoch = 2008.41012 J 2008-May-28 19:08:33 LOG2 antvel: Computed apparent RA = 11:59:26.9 Dec = +07:27:07.3 2008-May-28 19:08:33 LOG2 antvel: Parameters to Doppler: Topocentric 83313 2008 149 0.0 2008-May-28 19:08:33 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-May-28 19:08:33 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2008-May-28 19:08:33 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2008-May-28 19:08:33 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-May-28 19:08:33 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-May-28 19:08:33 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2008-May-28 19:08:33 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-28 19:08:33 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-May-28 19:08:33 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-May-28 19:08:33 LOG5 begin_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2008-May-28 19:08:33 LOG5 log_alfabeam: Parameters: 11.983333333333333 7.5 11.149234 2008.4101234884781 18.999933 2008-May-28 19:08:33 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333331 7.499999999999999 2008-May-28 19:08:33 LOG4 log_alfabeam: ALFABEAM 1 11.977374818514141 7.558437138651930 2008-May-28 19:08:33 LOG4 log_alfabeam: ALFABEAM 2 11.977668758591806 7.460468791967398 2008-May-28 19:08:33 LOG4 log_alfabeam: ALFABEAM 3 11.983613110166765 7.401722016527509 2008-May-28 19:08:33 LOG4 log_alfabeam: ALFABEAM 4 11.989299245808747 7.441715748309782 2008-May-28 19:08:33 LOG4 log_alfabeam: ALFABEAM 5 11.988993366123815 7.540076394646243 2008-May-28 19:08:33 LOG4 log_alfabeam: ALFABEAM 6 11.983013384584536 7.598049945662867 2008-May-28 19:08:33 INFO2 take_data: Starting WAPP+GALFA scan: 814900090 2008-May-28 19:08:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-May-28 19:08:34 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-May-28 19:08:34 LOG5 begin_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2008-May-28 19:08:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-28 19:08:34 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2008-May-28 19:08:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-May-28 19:08:34 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-28 19:08:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-28 19:08:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-28 19:08:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83315.00 2008-May-28 19:08:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-28 19:08:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-28 19:08:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-28 19:08:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-28 19:08:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-28 19:08:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1170.000000 MHz 2008-May-28 19:08:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 970.000000 MHz 2008-May-28 19:08:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-May-28 19:08:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2008-May-28 19:08:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-May-28 19:08:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-May-28 19:08:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-May-28 19:08:38 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-May-28 19:08:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-May-28 19:08:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-May-28 19:08:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-May-28 19:08:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-May-28 19:08:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-May-28 19:08:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-May-28 19:08:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-May-28 19:08:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-May-28 19:08:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-28 19:08:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-May-28 19:08:45 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-May-28 19:08:45 LOG5 end_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2008-May-28 19:08:45 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-May-28 19:08:45 LOG5 end_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2008-May-28 19:08:45 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2008-May-28 19:08:45 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2008-May-28 19:08:45 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2008-May-28 19:08:45 LOG5 antvel: Calling 'antvel 115900.000000 73000.000000 J 0' 2008-May-28 19:08:45 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +07:30:00.0 Epoch = 2008.41012 J 2008-May-28 19:08:45 LOG2 antvel: Computed apparent RA = 11:59:26.9 Dec = +07:27:07.3 2008-May-28 19:08:45 LOG2 antvel: Parameters to Doppler: Topocentric 83325 2008 149 0.0 2008-May-28 19:08:45 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-May-28 19:08:45 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2008-May-28 19:08:45 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2008-May-28 19:08:45 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-May-28 19:08:45 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-May-28 19:08:45 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2008-May-28 19:08:45 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-28 19:08:45 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-May-28 19:08:45 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-May-28 19:08:45 LOG5 begin_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2008-May-28 19:08:45 LOG5 log_alfabeam: Parameters: 11.983333333333333 7.5 11.152577 2008.4101238687351 18.999933 2008-May-28 19:08:45 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333329 7.500000000000004 2008-May-28 19:08:45 LOG4 log_alfabeam: ALFABEAM 1 11.977382274892811 7.558604907935376 2008-May-28 19:08:45 LOG4 log_alfabeam: ALFABEAM 2 11.977663732106690 7.460628924662502 2008-May-28 19:08:45 LOG4 log_alfabeam: ALFABEAM 3 11.983600560892805 7.401714055316653 2008-May-28 19:08:45 LOG4 log_alfabeam: ALFABEAM 4 11.989291829774491 7.441548171919140 2008-May-28 19:08:45 LOG4 log_alfabeam: ALFABEAM 5 11.988998447885614 7.539917709269205 2008-May-28 19:08:45 LOG4 log_alfabeam: ALFABEAM 6 11.983025816346677 7.598058504262551 2008-May-28 19:08:45 INFO2 take_data: Starting WAPP+GALFA scan: 814900091 2008-May-28 19:08:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-May-28 19:08:46 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-May-28 19:08:46 LOG5 begin_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2008-May-28 19:08:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-28 19:08:46 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2008-May-28 19:08:46 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-28 19:08:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-28 19:08:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-28 19:08:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83327.00 2008-May-28 19:08:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-28 19:08:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-28 19:08:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-28 19:08:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-28 19:08:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-28 19:08:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1170.000000 MHz 2008-May-28 19:08:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 970.000000 MHz 2008-May-28 19:08:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-May-28 19:08:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2008-May-28 19:08:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-May-28 19:08:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-May-28 19:08:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-May-28 19:08:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-May-28 19:08:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-May-28 19:08:53 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-May-28 19:08:53 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-May-28 19:08:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-May-28 19:08:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-May-28 19:08:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-May-28 19:08:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-May-28 19:08:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-28 19:08:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-May-28 19:08:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-May-28 19:08:57 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-May-28 19:08:57 LOG5 end_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2008-May-28 19:08:57 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-May-28 19:08:57 LOG5 end_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2008-May-28 19:08:57 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2008-May-28 19:08:57 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2008-May-28 19:08:57 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2008-May-28 19:08:57 LOG5 antvel: Calling 'antvel 115900.000000 73000.000000 J 0' 2008-May-28 19:08:57 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +07:30:00.0 Epoch = 2008.41012 J 2008-May-28 19:08:57 LOG2 antvel: Computed apparent RA = 11:59:26.9 Dec = +07:27:07.3 2008-May-28 19:08:57 LOG2 antvel: Parameters to Doppler: Topocentric 83337 2008 149 0.0 2008-May-28 19:08:57 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-May-28 19:08:57 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2008-May-28 19:08:57 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2008-May-28 19:08:57 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-May-28 19:08:57 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-May-28 19:08:57 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2008-May-28 19:08:57 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-28 19:08:57 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-May-28 19:08:57 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-May-28 19:08:57 LOG5 begin_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2008-May-28 19:08:57 LOG5 log_alfabeam: Parameters: 11.983333333333333 7.5 11.155919 2008.4101242489924 18.999933 2008-May-28 19:08:57 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333333 7.499999999999991 2008-May-28 19:08:57 LOG4 log_alfabeam: ALFABEAM 1 11.977389785270242 7.558773196569180 2008-May-28 19:08:57 LOG4 log_alfabeam: ALFABEAM 2 11.977658704312601 7.460789896505178 2008-May-28 19:08:57 LOG4 log_alfabeam: ALFABEAM 3 11.983587955965486 7.401706416750258 2008-May-28 19:08:57 LOG4 log_alfabeam: ALFABEAM 4 11.989284359966131 7.441380074434005 2008-May-28 19:08:57 LOG4 log_alfabeam: ALFABEAM 5 11.989003531567464 7.539758187081235 2008-May-28 19:08:57 LOG4 log_alfabeam: ALFABEAM 6 11.983038303457484 7.598066749932384 2008-May-28 19:08:57 INFO2 take_data: Starting WAPP+GALFA scan: 814900092 2008-May-28 19:08:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-May-28 19:08:58 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-May-28 19:08:58 LOG5 begin_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2008-May-28 19:08:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-28 19:08:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2008-May-28 19:08:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-28 19:08:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-28 19:08:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-28 19:08:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83339.00 2008-May-28 19:09:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-28 19:09:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-28 19:09:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-28 19:09:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-28 19:09:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-28 19:09:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1170.000000 MHz 2008-May-28 19:09:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 970.000000 MHz 2008-May-28 19:09:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-May-28 19:09:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2008-May-28 19:09:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-May-28 19:09:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-May-28 19:09:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-May-28 19:09:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-May-28 19:09:04 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-May-28 19:09:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-May-28 19:09:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-May-28 19:09:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-May-28 19:09:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-May-28 19:09:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-May-28 19:09:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-May-28 19:09:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-May-28 19:09:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-28 19:09:09 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-May-28 19:09:09 LOG5 end_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2008-May-28 19:09:09 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-May-28 19:09:09 LOG5 end_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2008-May-28 19:09:09 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2008-May-28 19:09:09 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2008-May-28 19:09:09 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2008-May-28 19:09:09 LOG5 antvel: Calling 'antvel 115900.000000 73000.000000 J 0' 2008-May-28 19:09:09 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +07:30:00.0 Epoch = 2008.41012 J 2008-May-28 19:09:09 LOG2 antvel: Computed apparent RA = 11:59:26.9 Dec = +07:27:07.3 2008-May-28 19:09:09 LOG2 antvel: Parameters to Doppler: Topocentric 83349 2008 149 0.0 2008-May-28 19:09:09 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-May-28 19:09:09 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2008-May-28 19:09:09 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2008-May-28 19:09:09 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-May-28 19:09:09 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-May-28 19:09:09 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2008-May-28 19:09:09 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-28 19:09:09 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-May-28 19:09:09 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-May-28 19:09:09 LOG5 begin_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2008-May-28 19:09:09 LOG5 log_alfabeam: Parameters: 11.983333333333333 7.5 11.159262 2008.4101246292494 18.999933 2008-May-28 19:09:09 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333331 7.500000000000004 2008-May-28 19:09:09 LOG4 log_alfabeam: ALFABEAM 1 11.977397354584802 7.558942105511346 2008-May-28 19:09:09 LOG4 log_alfabeam: ALFABEAM 2 11.977653672392456 7.460951808869032 2008-May-28 19:09:09 LOG4 log_alfabeam: ALFABEAM 3 11.983575287588099 7.401699101103930 2008-May-28 19:09:09 LOG4 log_alfabeam: ALFABEAM 4 11.989276831470576 7.441211354978988 2008-May-28 19:09:09 LOG4 log_alfabeam: ALFABEAM 5 11.989008620025160 7.539597727537625 2008-May-28 19:09:09 LOG4 log_alfabeam: ALFABEAM 6 11.983050853644787 7.598074682857898 2008-May-28 19:09:09 INFO2 take_data: Starting WAPP+GALFA scan: 814900093 2008-May-28 19:09:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-May-28 19:09:10 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-May-28 19:09:10 LOG5 begin_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2008-May-28 19:09:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-28 19:09:10 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2008-May-28 19:09:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-28 19:09:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-28 19:09:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-28 19:09:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83351.00 2008-May-28 19:09:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-28 19:09:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-28 19:09:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-28 19:09:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-28 19:09:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-28 19:09:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1170.000000 MHz 2008-May-28 19:09:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 970.000000 MHz 2008-May-28 19:09:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-May-28 19:09:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2008-May-28 19:09:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-May-28 19:09:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-May-28 19:09:13 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-May-28 19:09:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-May-28 19:09:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-May-28 19:09:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-May-28 19:09:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-May-28 19:09:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-May-28 19:09:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-May-28 19:09:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-May-28 19:09:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-May-28 19:09:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-May-28 19:09:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-May-28 19:09:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-May-28 19:09:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-28 19:09:21 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-May-28 19:09:21 LOG5 end_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2008-May-28 19:09:21 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-May-28 19:09:21 LOG5 end_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2008-May-28 19:09:21 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2008-May-28 19:09:21 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-May-28 19:09:21 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-May-28 19:09:21 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-May-28 19:09:21 LOG5 begin_task: Level: (3) ID = <10044> Status = 0 0 0 0 ok 2008-May-28 19:09:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-May-28 19:09:21 LOG3 CALCONTROL-caltrig: Software trigger 2008-May-28 19:09:21 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-May-28 19:09:21 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-May-28 19:09:21 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-May-28 19:09:21 LOG5 end_task: Level: (3) ID = <10044> Status = 0 0 0 0 ok 2008-May-28 19:09:21 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2008-May-28 19:09:21 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2008-May-28 19:09:21 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2008-May-28 19:09:21 LOG5 antvel: Calling 'antvel 115900.000000 73000.000000 J 0' 2008-May-28 19:09:21 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +07:30:00.0 Epoch = 2008.41013 J 2008-May-28 19:09:21 LOG2 antvel: Computed apparent RA = 11:59:26.9 Dec = +07:27:07.3 2008-May-28 19:09:21 LOG2 antvel: Parameters to Doppler: Topocentric 83361 2008 149 0.0 2008-May-28 19:09:21 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-May-28 19:09:21 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2008-May-28 19:09:21 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2008-May-28 19:09:21 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-May-28 19:09:21 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-May-28 19:09:21 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2008-May-28 19:09:21 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-28 19:09:21 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-May-28 19:09:21 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-May-28 19:09:21 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2008-May-28 19:09:21 LOG5 log_alfabeam: Parameters: 11.983333333333333 7.5 11.162604 2008.4101250095064 18.999933 2008-May-28 19:09:21 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333331 7.499999999999999 2008-May-28 19:09:21 LOG4 log_alfabeam: ALFABEAM 1 11.977404978754642 7.559111533915559 2008-May-28 19:09:21 LOG4 log_alfabeam: ALFABEAM 2 11.977648639551781 7.461114569940198 2008-May-28 19:09:21 LOG4 log_alfabeam: ALFABEAM 3 11.983562563086927 7.401692117654035 2008-May-28 19:09:21 LOG4 log_alfabeam: ALFABEAM 4 11.989269248346275 7.441042114254693 2008-May-28 19:09:21 LOG4 log_alfabeam: ALFABEAM 5 11.989013710024695 7.539436421543187 2008-May-28 19:09:21 LOG4 log_alfabeam: ALFABEAM 6 11.983063459654771 7.598082293491627 2008-May-28 19:09:21 INFO2 take_data: Starting WAPP+GALFA scan: 814900094 2008-May-28 19:09:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-May-28 19:09:22 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-May-28 19:09:22 LOG5 begin_task: Level: (4) ID = <10046> Status = 0 0 0 0 ok 2008-May-28 19:09:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-28 19:09:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2008-May-28 19:09:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-28 19:09:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-28 19:09:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-28 19:09:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83363.00 2008-May-28 19:09:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-28 19:09:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-28 19:09:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-28 19:09:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-28 19:09:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-28 19:09:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1170.000000 MHz 2008-May-28 19:09:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 970.000000 MHz 2008-May-28 19:09:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-May-28 19:09:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2008-May-28 19:09:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-May-28 19:09:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-May-28 19:09:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-May-28 19:09:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-May-28 19:09:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-May-28 19:09:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-May-28 19:09:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-May-28 19:09:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-May-28 19:09:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-May-28 19:09:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-May-28 19:09:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-May-28 19:09:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-May-28 19:09:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-May-28 19:09:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-May-28 19:09:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-May-28 19:09:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-May-28 19:09:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-May-28 19:09:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-28 19:09:33 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-May-28 19:09:33 LOG5 end_task: Level: (4) ID = <10046> Status = 0 0 0 0 ok 2008-May-28 19:09:33 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-May-28 19:09:33 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2008-May-28 19:09:33 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2008-May-28 19:09:33 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2008-May-28 19:09:33 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2008-May-28 19:09:33 LOG5 antvel: Calling 'antvel 115900.000000 73000.000000 J 0' 2008-May-28 19:09:33 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +07:30:00.0 Epoch = 2008.41013 J 2008-May-28 19:09:33 LOG2 antvel: Computed apparent RA = 11:59:26.9 Dec = +07:27:07.3 2008-May-28 19:09:33 LOG2 antvel: Parameters to Doppler: Topocentric 83373 2008 149 0.0 2008-May-28 19:09:33 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-May-28 19:09:33 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2008-May-28 19:09:33 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2008-May-28 19:09:33 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-May-28 19:09:33 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-May-28 19:09:33 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2008-May-28 19:09:33 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-28 19:09:33 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-May-28 19:09:33 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-May-28 19:09:33 LOG5 begin_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2008-May-28 19:09:33 LOG5 log_alfabeam: Parameters: 11.983333333333333 7.5 11.165946 2008.4101253897634 18.999933 2008-May-28 19:09:33 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333329 7.500000000000011 2008-May-28 19:09:33 LOG4 log_alfabeam: ALFABEAM 1 11.977412660484898 7.559281532387611 2008-May-28 19:09:33 LOG4 log_alfabeam: ALFABEAM 2 11.977643604484214 7.461278233083203 2008-May-28 19:09:33 LOG4 log_alfabeam: ALFABEAM 3 11.983549778429170 7.401685469117265 2008-May-28 19:09:33 LOG4 log_alfabeam: ALFABEAM 4 11.989261607901273 7.440872301679645 2008-May-28 19:09:33 LOG4 log_alfabeam: ALFABEAM 5 11.989018802894588 7.539274216126902 2008-May-28 19:09:33 LOG4 log_alfabeam: ALFABEAM 6 11.983076125486717 7.598089579399073 2008-May-28 19:09:33 INFO2 take_data: Starting WAPP+GALFA scan: 814900095 2008-May-28 19:09:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-May-28 19:09:34 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-May-28 19:09:34 LOG5 begin_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2008-May-28 19:09:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-28 19:09:34 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2008-May-28 19:09:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-May-28 19:09:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-May-28 19:09:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-May-28 19:09:34 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-28 19:09:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-28 19:09:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-28 19:09:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83375.00 2008-May-28 19:09:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-28 19:09:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-28 19:09:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-28 19:09:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-28 19:09:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-28 19:09:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1170.000000 MHz 2008-May-28 19:09:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 970.000000 MHz 2008-May-28 19:09:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-May-28 19:09:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2008-May-28 19:09:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-May-28 19:09:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-May-28 19:09:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-May-28 19:09:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-May-28 19:09:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-May-28 19:09:38 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-May-28 19:09:38 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-May-28 19:09:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-May-28 19:09:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-May-28 19:09:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-May-28 19:09:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-May-28 19:09:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-May-28 19:09:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-May-28 19:09:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-May-28 19:09:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-May-28 19:09:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-May-28 19:09:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-May-28 19:09:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-28 19:09:45 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-May-28 19:09:45 LOG5 end_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2008-May-28 19:09:45 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-May-28 19:09:45 LOG5 end_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2008-May-28 19:09:45 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2008-May-28 19:09:45 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2008-May-28 19:09:45 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2008-May-28 19:09:45 LOG5 antvel: Calling 'antvel 115900.000000 73000.000000 J 0' 2008-May-28 19:09:45 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +07:30:00.0 Epoch = 2008.41013 J 2008-May-28 19:09:45 LOG2 antvel: Computed apparent RA = 11:59:26.9 Dec = +07:27:07.3 2008-May-28 19:09:45 LOG2 antvel: Parameters to Doppler: Topocentric 83385 2008 149 0.0 2008-May-28 19:09:45 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-May-28 19:09:45 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2008-May-28 19:09:45 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2008-May-28 19:09:45 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-May-28 19:09:45 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-May-28 19:09:45 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2008-May-28 19:09:45 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-28 19:09:45 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-May-28 19:09:45 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-May-28 19:09:45 LOG5 begin_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2008-May-28 19:09:45 LOG5 log_alfabeam: Parameters: 11.983333333333333 7.5 11.169289 2008.4101257700204 18.999933 2008-May-28 19:09:45 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333331 7.499999999999998 2008-May-28 19:09:45 LOG4 log_alfabeam: ALFABEAM 1 11.977420402552530 7.559452152173458 2008-May-28 19:09:45 LOG4 log_alfabeam: ALFABEAM 2 11.977638565884163 7.461442852755269 2008-May-28 19:09:45 LOG4 log_alfabeam: ALFABEAM 3 11.983536929510553 7.401679158666896 2008-May-28 19:09:45 LOG4 log_alfabeam: ALFABEAM 4 11.989253907372040 7.440701866029599 2008-May-28 19:09:45 LOG4 log_alfabeam: ALFABEAM 5 11.989023899963366 7.539111057227027 2008-May-28 19:09:45 LOG4 log_alfabeam: ALFABEAM 6 11.983088855211030 7.598096537701859 2008-May-28 19:09:45 INFO2 take_data: Starting WAPP+GALFA scan: 814900096 2008-May-28 19:09:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-May-28 19:09:46 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-May-28 19:09:46 LOG5 begin_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2008-May-28 19:09:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-May-28 19:09:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-May-28 19:09:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-May-28 19:09:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-28 19:09:46 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2008-May-28 19:09:46 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-28 19:09:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-28 19:09:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-28 19:09:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83387.00 2008-May-28 19:09:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-28 19:09:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-28 19:09:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-28 19:09:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-28 19:09:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-28 19:09:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1170.000000 MHz 2008-May-28 19:09:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 970.000000 MHz 2008-May-28 19:09:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-May-28 19:09:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2008-May-28 19:09:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-May-28 19:09:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-May-28 19:09:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-May-28 19:09:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-May-28 19:09:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-May-28 19:09:51 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-May-28 19:09:51 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-May-28 19:09:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-May-28 19:09:53 COMMAND CIMA-send_to_exec: Sending command to abort observation 2008-May-28 19:09:53 LOG4 exec_msg: From OBSERVER: abort_task abort 2008-May-28 19:09:53 WARNING abort_task: WARNING abort requested! 2008-May-28 19:09:53 WARNING abort_task: WARNING Aborting waiting on WAPP+GALFA spectra 2008-May-28 19:09:54 WARNING abort_task: WARNING Aborting wait for waiting on WAPP+GALFA spectra 2008-May-28 19:09:54 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'ABORT' 2008-May-28 19:09:54 LOG5 end_task: Level: (4) ID = <10050> Status = 1 0 0 0 abort 2008-May-28 19:09:54 START begin_task: Starting task 'stopping the WAPPs' 2008-May-28 19:09:54 LOG5 begin_task: Level: (4) ID = <10051> Status = 1 0 0 0 abort 2008-May-28 19:09:54 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Stopping the WAPPs ...} 2008-May-28 19:09:54 INFO1 stop_wapp: Stopping the WAPPs 2008-May-28 19:09:54 LOG3 send_to_one_wapp: To WAPPCON: ABORT 2008-May-28 19:09:54 LOG3 send_to_one_wapp: To WAPPCON2: ABORT 2008-May-28 19:09:54 LOG3 send_to_one_wapp: To WAPPCON3: ABORT 2008-May-28 19:09:54 LOG3 send_to_one_wapp: To WAPPCON4: ABORT 2008-May-28 19:09:54 START begin_task: Starting task 'waiting on stopping WAPPs' 2008-May-28 19:09:54 LOG5 begin_task: Level: (5) ID = <10052> Status = 1 0 0 0 abort 2008-May-28 19:09:54 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ABORT' 2008-May-28 19:09:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-May-28 19:09:55 NOTE WAPP=1+2+3+4-wappcon: WAPP successfully aborted! 2008-May-28 19:09:55 LOG4 WAPP=1+2+3+4-start_spectra: Abort request received 2008-May-28 19:09:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-28 19:09:55 STOP end_task: Finishing task 'waiting on stopping WAPPs' with status 'ABORT' 2008-May-28 19:09:55 LOG5 end_task: Level: (5) ID = <10052> Status = 1 0 0 0 abort 2008-May-28 19:09:55 STOP end_task: Finishing task 'stopping the WAPPs' with status 'ABORT' 2008-May-28 19:09:55 LOG5 end_task: Level: (4) ID = <10051> Status = 1 0 0 0 abort 2008-May-28 19:09:55 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'ABORT' 2008-May-28 19:09:55 LOG5 end_task: Level: (3) ID = <10049> Status = 1 0 0 0 abort 2008-May-28 19:09:55 INFO2 smartfreq: Switching off CAL 2008-May-28 19:09:55 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-May-28 19:09:55 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-May-28 19:09:55 INFO3 restore_frequencies: Restoring original frequencies 2008-May-28 19:09:55 LOG5 antvel: Calling 'antvel 115900.000000 73000.000000 J 0' 2008-May-28 19:09:55 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +07:30:00.0 Epoch = 2008.41013 J 2008-May-28 19:09:55 LOG2 antvel: Computed apparent RA = 11:59:26.9 Dec = +07:27:07.3 2008-May-28 19:09:55 LOG2 antvel: Parameters to Doppler: Topocentric 83395 2008 149 0.0 2008-May-28 19:09:55 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-May-28 19:09:55 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.2 rest0=1381.2 rest1=1381.2 rest2=1381.2 rest3=1381.2 rest4=1381.2 rest5=1381.2 rest6=1381.2 rest7=1381.2 2008-May-28 19:09:55 INFO4 dopset_gen: New sky frequencies: 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 2008-May-28 19:09:55 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.200000 sky0=1381.200000 sky1=1381.200000 sky2=1381.200000 sky3=1381.200000 sky4=1381.200000 sky5=1381.200000 sky6=1381.200000 sky7=1381.200000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-May-28 19:09:55 LOG2 dopset_gen: Result from 'sky2syn': 1631.200000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-May-28 19:09:55 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2008-May-28 19:09:55 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-28 19:09:55 STOP finish_task: Finishing task 'smart frequency switching' 2008-May-28 19:09:55 LOG5 finish_task: Level: (2) ID = <10020> Status = 1 0 0 0 abort 2008-May-28 19:09:55 WARNING finish_task: WARNING aborted pattern: smart f