2008-May-22 19:15:45 BEGIN executive: CIMA executive starting ... 2008-May-22 19:15:46 NOTE executive: STARTING NEW CIMA SESSION 2008-May-22 19:15:46 INFO1 executive: Using CIMA version 2.3.xx 'unusable' from 2008-05-22 19:12 2008-May-22 19:15:46 INFO4 executive: This is an ON-LINE session 2008-May-22 19:15:46 INFO4 executive: This is a REMOTE session 2008-May-22 19:15:46 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2008-May-22 19:15:46 INFO1 executive: CIMA session for project 'a2048' in 'line' mode for 'SS&WVD' 2008-May-22 19:15:46 INFO2 executive: Logging to '/share/obs4/usr/a2048/a2048.cimalog_20080522' 2008-May-22 19:15:47 LOG2 log_preferences: Currently applied preferences: 2008-May-22 19:15:47 LOG2 log_preferences: prefs(dailylog) = daily 2008-May-22 19:15:47 LOG2 log_preferences: prefs(offlinelog) = skip 2008-May-22 19:15:47 LOG2 log_preferences: prefs(datawindow) = ignore 2008-May-22 19:15:47 LOG2 log_preferences: prefs(limitwarning) = enabled 2008-May-22 19:15:47 LOG2 log_preferences: prefs(wappfailure) = abort 2008-May-22 19:15:47 LOG2 log_preferences: prefs(helpstyle) = stay-open 2008-May-22 19:15:47 LOG2 log_preferences: prefs(logcolours) = full 2008-May-22 19:15:47 LOG2 log_preferences: prefs(displaylevel) = INFO3 2008-May-22 19:15:47 LOG2 log_preferences: prefs(loglevel) = LOG5 2008-May-22 19:15:47 LOG2 log_preferences: prefs(displayformat) = short 2008-May-22 19:15:47 LOG2 log_preferences: prefs(logformat) = new 2008-May-22 19:15:47 LOG2 log_preferences: prefs(fontsize) = 4 2008-May-22 19:15:47 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2008-May-22 19:15:47 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2048 2008-May-22 19:15:47 ALERT executive: CIMA executive ready 2008-May-22 19:15:50 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0x300002 2008-May-22 19:15:50 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0x300002' 2008-May-22 19:15:50 LOG4 got_cormsg: From DATATAKING: vw% io 2008-May-22 19:15:50 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2008-May-22 19:15:50 LOG4 got_cormsg: From DATATAKING: 2008-May-22 19:15:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-22 19:15:50 LOG4 got_cormsg: From DATATAKING: tape stat 2008-May-22 19:15:50 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2008-May-22 19:15:50 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2008-May-22 19:15:50 LOG4 got_cormsg: From DATATAKING: vw% connectall 2008-May-22 19:15:50 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2008-May-22 19:15:50 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2008-May-22 19:15:50 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2008-May-22 19:15:50 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2008-May-22 19:15:50 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2008-May-22 19:15:50 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2008-May-22 19:15:50 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2008-May-22 19:15:50 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2008-May-22 19:15:50 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2048 2008-May-22 19:15:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-22 19:15:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-22 19:15:54 NOTE frontend: CIMA frontend ready 2008-May-22 19:17:08 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2008-May-22 19:17:08 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2008-May-22 19:17:08 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2008-May-22 19:17:08 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2008-May-22 19:17:08 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-May-22 19:17:08 NOTE select_receiver: Starting to select receiver ALFA 2008-May-22 19:17:08 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-May-22 19:17:08 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-May-22 19:17:09 LOG3 vw_send: To DATATAKING: acvlbical off 2008-May-22 19:17:09 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-May-22 19:17:09 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-May-22 19:17:09 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-May-22 19:17:09 DONE finish_task: DONE finished selecting: receiver ALFA 2008-May-22 19:17:09 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-May-22 19:17:09 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-May-22 19:17:09 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-May-22 19:17:09 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-May-22 19:17:09 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-May-22 19:17:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-22 19:17:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-22 19:17:22 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2008-May-22 19:17:22 LOG4 exec_msg: From OBSERVER: restart_wapp 2008-May-22 19:17:22 LOG5 restart_wapp: Calling 'restart_wapp' 2008-May-22 19:17:22 BEGIN begin_task: Starting task 'restarting the WAPPs' 2008-May-22 19:17:22 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-May-22 19:17:22 NOTE restart_wapp: Restarting all WAPPs 2008-May-22 19:17:22 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2008-May-22 19:17:22 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2008-May-22 19:17:22 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-May-22 19:17:22 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-May-22 19:17:25 ALERT WAPP=2-wappcon: WAPP2 restarting 2008-May-22 19:17:25 ALERT WAPP=1-wappcon: WAPP1 restarting 2008-May-22 19:17:25 ALERT WAPP=3-wappcon: WAPP3 restarting 2008-May-22 19:17:25 ALERT WAPP=4-wappcon: WAPP4 restarting 2008-May-22 19:19:04 INFO1 CIMA-run_command_file: Transferring command file 'command_galfasrc.cmd ' to executive ... 2008-May-22 19:19:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 5 {LOAD togs_ages.conf} 2008-May-22 19:19:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 6 {CATALOG togs_ages.cat} 2008-May-22 19:19:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {IF lst < 10 then GOTO galfasrc} 2008-May-22 19:19:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {IF lst >= 10 then GOTO galfasrc2} 2008-May-22 19:19:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {ALFAANGLE 19} 2008-May-22 19:19:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 10 {WAITTRACK} 2008-May-22 19:19:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 14 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2008-May-22 19:19:04 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-May-22 19:19:04 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc.cmd 1 1 7 2008-May-22 19:19:04 LOG4 run_command_file: Calling 'run_command_file command_galfasrc.cmd 1 1 7' 2008-May-22 19:19:04 BEGIN begin_task: Starting task 'running command file 'command_galfasrc.cmd'' 2008-May-22 19:19:04 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-May-22 19:19:04 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc.cmd' ...} 2008-May-22 19:19:04 NOTE run_command_file: Starting execution of command file 'command_galfasrc.cmd' from line 1 2008-May-22 19:19:04 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_ages.conf' 2008-May-22 19:19:04 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2008-May-22 19:19:04 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-May-22 19:19:04 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2008-May-22 19:19:05 NOTE CIMA-load_config_file: Loading configuration file 'togs_ages.conf' 2008-May-22 19:19:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-May-22 19:19:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-May-22 19:19:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-May-22 19:19:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-May-22 19:19:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-May-22 19:19:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2008-May-22 19:19:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-May-22 19:19:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1381.2" 2008-May-22 19:19:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1381.2" 2008-May-22 19:19:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1381.2" 2008-May-22 19:19:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1381.2" 2008-May-22 19:19:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1381.2" 2008-May-22 19:19:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1381.2" 2008-May-22 19:19:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1381.2" 2008-May-22 19:19:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1381.2" 2008-May-22 19:19:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1381.2" 2008-May-22 19:19:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-May-22 19:19:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-May-22 19:19:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-May-22 19:19:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-May-22 19:19:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-May-22 19:19:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-May-22 19:19:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-May-22 19:19:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-May-22 19:19:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-May-22 19:19:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-May-22 19:19:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-May-22 19:19:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-May-22 19:19:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-May-22 19:19:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2008-May-22 19:19:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-May-22 19:19:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-May-22 19:19:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-May-22 19:19:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-May-22 19:19:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-May-22 19:19:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-May-22 19:19:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-May-22 19:19:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-May-22 19:19:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-May-22 19:19:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1631.200000" 2008-May-22 19:19:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-May-22 19:19:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-May-22 19:19:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-May-22 19:19:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-May-22 19:19:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-May-22 19:19:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-May-22 19:19:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-May-22 19:19:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-May-22 19:19:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-May-22 19:19:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-May-22 19:19:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-May-22 19:19:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-May-22 19:19:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-May-22 19:19:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-May-22 19:19:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-May-22 19:19:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-May-22 19:19:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-May-22 19:19:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-May-22 19:19:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-May-22 19:19:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-May-22 19:19:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-May-22 19:19:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-May-22 19:19:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-May-22 19:19:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-May-22 19:19:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-May-22 19:19:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-May-22 19:19:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-May-22 19:19:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-May-22 19:19:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-May-22 19:19:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-May-22 19:19:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-May-22 19:19:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-May-22 19:19:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-May-22 19:19:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-May-22 19:19:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-May-22 19:19:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-May-22 19:19:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-May-22 19:19:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-May-22 19:19:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-May-22 19:19:06 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-May-22 19:19:07 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-May-22 19:19:07 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-May-22 19:19:07 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-May-22 19:19:07 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-May-22 19:19:07 INFO1 config_iflo: Selecting receiver ALFA 2008-May-22 19:19:07 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2008-May-22 19:19:07 LOG1 select_receiver: Calling 'select_receiver alfa no no no' 2008-May-22 19:19:07 START begin_task: Starting task 'selecting receiver ALFA' 2008-May-22 19:19:07 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-May-22 19:19:07 NOTE select_receiver: Starting to select receiver ALFA 2008-May-22 19:19:07 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-May-22 19:19:07 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-May-22 19:19:07 LOG3 vw_send: To DATATAKING: acvlbical off 2008-May-22 19:19:07 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-May-22 19:19:07 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-May-22 19:19:07 LOG5 finish_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-May-22 19:19:07 INFO2 finish_task: DONE finished selecting: receiver ALFA 2008-May-22 19:19:07 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-May-22 19:19:07 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-May-22 19:19:07 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-May-22 19:19:07 START begin_task: Starting task 'waiting for receiver ALFA' 2008-May-22 19:19:07 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2008-May-22 19:19:07 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2008-May-22 19:19:07 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2008-May-22 19:19:07 INFO1 config_iflo: Configuring rest of the IF/LO path 2008-May-22 19:19:07 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2008-May-22 19:19:07 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-May-22 19:19:07 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-May-22 19:19:07 START begin_task: Starting task 'waiting on command to ALFA' 2008-May-22 19:19:07 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2008-May-22 19:19:07 LOG4 got_alfamon: From ALFAMON: ACK 2008-May-22 19:19:07 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-May-22 19:19:07 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2008-May-22 19:19:07 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-May-22 19:19:07 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-May-22 19:19:07 LOG3 vw_send: To DATATAKING: alfafb 1 2008-May-22 19:19:07 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2008-May-22 19:19:07 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-May-22 19:19:07 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-May-22 19:19:07 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2008-May-22 19:19:07 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2008-May-22 19:19:07 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2008-May-22 19:19:07 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2008-May-22 19:19:07 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2008-May-22 19:19:07 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2008-May-22 19:19:07 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-May-22 19:19:07 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-May-22 19:19:07 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-May-22 19:19:07 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-May-22 19:19:07 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-May-22 19:19:07 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2008-May-22 19:19:07 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2008-May-22 19:19:07 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2008-May-22 19:19:07 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2008-May-22 19:19:07 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-May-22 19:19:07 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2008-May-22 19:19:07 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-May-22 19:19:07 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-May-22 19:19:07 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-22 19:19:07 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-May-22 19:19:07 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2008-May-22 19:19:07 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-May-22 19:19:07 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2008-May-22 19:19:07 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2008-May-22 19:19:07 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-May-22 19:19:07 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-May-22 19:19:07 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-May-22 19:19:07 LOG5 begin_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2008-May-22 19:19:07 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-May-22 19:19:07 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-May-22 19:19:07 LOG4 got_cormsg: From DATATAKING: alfafb 1 2008-May-22 19:19:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2008-May-22 19:19:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2008-May-22 19:19:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2008-May-22 19:19:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2008-May-22 19:19:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2008-May-22 19:19:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2008-May-22 19:19:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2008-May-22 19:19:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2008-May-22 19:19:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2008-May-22 19:19:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2008-May-22 19:19:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2008-May-22 19:19:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-May-22 19:19:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2008-May-22 19:19:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-May-22 19:19:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-22 19:19:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-May-22 19:19:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2008-May-22 19:19:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2008-May-22 19:19:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2008-May-22 19:19:08 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-May-22 19:19:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-22 19:19:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-22 19:19:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-22 19:19:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-22 19:19:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-22 19:19:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-22 19:19:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-22 19:19:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-22 19:19:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-22 19:19:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-22 19:19:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-22 19:19:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-22 19:19:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-22 19:19:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-22 19:19:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-22 19:19:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-22 19:19:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-22 19:19:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-22 19:19:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-22 19:19:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-22 19:19:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-22 19:19:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-22 19:19:23 LOG4 got_cormsg: From DATATAKING: DONE 2008-May-22 19:19:23 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-May-22 19:19:23 LOG5 end_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2008-May-22 19:19:23 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-May-22 19:19:23 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-May-22 19:19:23 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-May-22 19:19:23 DONE finish_task: DONE finished configuration: IF/LO path 2008-May-22 19:19:23 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-May-22 19:19:23 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-May-22 19:19:23 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-May-22 19:19:23 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-May-22 19:19:23 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-May-22 19:19:23 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-May-22 19:19:23 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-May-22 19:19:23 START begin_task: Starting task 'selecting calibration port' 2008-May-22 19:19:23 LOG5 begin_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-May-22 19:19:23 LOG3 vw_send: To DATATAKING: calport 3 2008-May-22 19:19:23 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-May-22 19:19:23 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-May-22 19:19:23 START begin_task: Starting task 'waiting on calport' 2008-May-22 19:19:23 LOG5 begin_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2008-May-22 19:19:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-22 19:19:24 LOG4 got_cormsg: From DATATAKING: calport 3 2008-May-22 19:19:24 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-May-22 19:19:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-22 19:19:24 LOG4 got_cormsg: From DATATAKING: DONE 2008-May-22 19:19:24 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-May-22 19:19:24 LOG5 end_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2008-May-22 19:19:24 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-May-22 19:19:24 STOP finish_task: Finishing task 'selecting calibration port' 2008-May-22 19:19:24 LOG5 finish_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-May-22 19:19:24 INFO2 finish_task: DONE finished configuring: calibration port 2008-May-22 19:19:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-May-22 19:19:24 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-May-22 19:19:24 LOG5 end_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-May-22 19:19:24 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-May-22 19:19:24 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-May-22 19:19:24 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-May-22 19:19:24 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-May-22 19:19:24 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-May-22 19:19:24 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-May-22 19:19:24 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-May-22 19:19:24 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-May-22 19:19:24 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 SS&WVD 2008-May-22 19:19:24 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 SS&WVD 2008-May-22 19:19:24 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 SS&WVD 2008-May-22 19:19:24 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 SS&WVD 2008-May-22 19:19:24 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-May-22 19:19:24 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-May-22 19:19:24 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-May-22 19:19:24 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2008-May-22 19:19:24 LOG3 CALCONTROL-caltrig: Software trigger 2008-May-22 19:19:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-22 19:19:24 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-May-22 19:19:24 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-May-22 19:19:24 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-May-22 19:19:24 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2008-May-22 19:19:24 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 SS&WVD 2008-May-22 19:19:24 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 SS&WVD 2008-May-22 19:19:24 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 SS&WVD 2008-May-22 19:19:24 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 SS&WVD 2008-May-22 19:19:24 STOP finish_task: Finishing task 'configuring WAPPs' 2008-May-22 19:19:24 LOG5 finish_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-May-22 19:19:24 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-May-22 19:19:24 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-May-22 19:19:24 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-May-22 19:19:24 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-May-22 19:19:24 COMMAND run_command_line: EXECUTING command 6: 'CATALOG togs_ages.cat' 2008-May-22 19:19:24 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/togs_ages.cat' 2008-May-22 19:19:25 COMMAND run_command_line: EXECUTING command 7: 'IF lst < 10 then GOTO galfasrc' 2008-May-22 19:19:25 INFO5 is_if_valid: Evaluating condition: LST < 10 2008-May-22 19:19:25 INFO5 is_if_valid: Condition parsed as: 10.936026 < 10 2008-May-22 19:19:25 INFO1 is_if_valid: Skipping line 'IF lst < 10 then GOTO galfasrc' 2008-May-22 19:19:25 COMMAND run_command_line: EXECUTING command 8: 'IF lst >= 10 then GOTO galfasrc2' 2008-May-22 19:19:25 INFO5 is_if_valid: Evaluating condition: LST >= 10 2008-May-22 19:19:25 INFO5 is_if_valid: Condition parsed as: 10.936026 >= 10 2008-May-22 19:19:25 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2048/togs_ages.cat galfasrc2 nooffset nowait' 2008-May-22 19:19:25 BEGIN begin_task: Starting task 'tracking source 'galfasrc2'' 2008-May-22 19:19:25 LOG5 begin_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2008-May-22 19:19:25 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc2' ...} 2008-May-22 19:19:25 LOG3 track_source: Calling 'track_source galfasrc2 115900.0 +073000 J 0.0 0.0 main small /share/obs4/usr/a2048/togs_ages.cat 0 Topocentric velocity(optical)' 2008-May-22 19:19:25 START begin_task: Starting task 'sending tracking commands' 2008-May-22 19:19:25 LOG5 begin_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2008-May-22 19:19:25 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc2} INFO {Slewing to source 'galfasrc2' ...} 2008-May-22 19:19:25 INFO1 track_source: Starting to track galfasrc2 2008-May-22 19:19:25 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc2" 2008-May-22 19:19:25 LOG3 vw_send: To DATATAKING: set ra 115900.0 2008-May-22 19:19:25 LOG3 vw_send: To DATATAKING: set dec +073000 2008-May-22 19:19:25 LOG3 vw_send: To DATATAKING: pnt tr send 2008-May-22 19:19:25 LOG3 vw_send: To DATATAKING: pnt tr 115900.0 +073000 -CJ 2008-May-22 19:19:25 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-May-22 19:19:25 STOP finish_task: Finishing task 'sending tracking commands' 2008-May-22 19:19:25 LOG5 finish_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2008-May-22 19:19:25 INFO2 finish_task: DONE finished sending: tracking commands 2008-May-22 19:19:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-May-22 19:19:25 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-May-22 19:19:25 LOG5 end_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2008-May-22 19:19:25 STOP finish_task: Finishing task 'tracking source 'galfasrc2'' 2008-May-22 19:19:25 LOG5 finish_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2008-May-22 19:19:25 DONE finish_task: DONE finished tracking: source 'galfasrc2' 2008-May-22 19:19:25 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-May-22 19:19:25 END end_task: Finishing task 'tracking source 'galfasrc2'' with status 'OK' 2008-May-22 19:19:25 LOG5 end_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2008-May-22 19:19:25 COMMAND run_command_line: EXECUTING command 9: 'ALFAANGLE 19' 2008-May-22 19:19:25 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2008-May-22 19:19:25 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-May-22 19:19:25 LOG5 begin_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2008-May-22 19:19:25 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-May-22 19:19:25 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-May-22 19:19:25 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-May-22 19:19:25 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-May-22 19:19:25 START begin_task: Starting task 'waiting on ALFA rotation' 2008-May-22 19:19:25 LOG5 begin_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2008-May-22 19:19:25 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 SS&WVD' 2008-May-22 19:19:25 NOTE WAPPDATA-new_file: New FITS file: wapp.20080522.a2048.0000.fits 2008-May-22 19:19:25 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc2" 2008-May-22 19:19:25 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-May-22 19:19:25 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-May-22 19:19:25 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20080522.a2048.0000.fits} 2008-May-22 19:19:25 LOG4 got_cormsg: From DATATAKING: set ra 115900.0 2008-May-22 19:19:25 LOG4 got_cormsg: From DATATAKING: set dec +073000 2008-May-22 19:19:25 LOG4 got_cormsg: From DATATAKING: vw% 115900.0 2008-May-22 19:19:25 LOG4 got_cormsg: From DATATAKING: vw% +073000 2008-May-22 19:19:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-22 19:19:25 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-May-22 19:19:25 LOG4 got_cormsg: From DATATAKING: pnt tr 115900.0 +073000 -CJ 2008-May-22 19:19:25 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-May-22 19:19:25 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-May-22 19:19:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-22 19:19:26 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 SS&WVD' 2008-May-22 19:21:55 ERROR end_wait_seconds: ERROR timed out while waiting for ALFA rotation! 2008-May-22 19:21:55 LOG1 task_failed: Task 'waiting on ALFA rotation' failed! 2008-May-22 19:21:55 LOG5 task_failed: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2008-May-22 19:21:55 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'FAILED' 2008-May-22 19:21:55 LOG5 end_task: Level: (3) ID = <10016> Status = 0 0 0 1 failed 2008-May-22 19:21:55 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-May-22 19:21:55 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-May-22 19:21:55 LOG5 finish_task: Level: (2) ID = <10015> Status = 0 0 0 1 failed 2008-May-22 19:21:55 ERROR finish_task: ERROR failed configuration: rotating ALFA to +19 degrees 2008-May-22 19:21:55 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2008-May-22 19:21:55 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'FAILED' 2008-May-22 19:21:55 LOG5 end_task: Level: (2) ID = <10015> Status = 0 0 0 1 failed 2008-May-22 19:21:55 ALERT run_command_file: Stopping command file processing at line 9! 2008-May-22 19:21:56 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2008-May-22 19:21:56 STOP finish_task: Finishing task 'running command file 'command_galfasrc.cmd'' 2008-May-22 19:21:56 LOG5 finish_task: Level: (1) ID = <10003> Status = 0 0 0 1 failed 2008-May-22 19:21:56 ERROR finish_task: ERROR failed running: command file 'command_galfasrc.cmd' 2008-May-22 19:21:56 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2008-May-22 19:21:56 END end_task: Finishing task 'running command file 'command_galfasrc.cmd'' with status 'FAILED' 2008-May-22 19:21:56 LOG5 end_task: Level: (1) ID = <10003> Status = 0 0 0 1 failed 2008-May-22 19:23:44 INFO1 CIMA-run_command_file: Transferring command file '080522_obs.cmd ' to executive ... 2008-May-22 19:23:44 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 3 {LOAD ages_config.conf} 2008-May-22 19:23:44 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 4 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5} 2008-May-22 19:23:44 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 5 {CATALOG AGESFull.cat} 2008-May-22 19:23:44 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {IF LSTSLEW(AGESVC1A_p1_005) < 112226 THEN} 2008-May-22 19:23:44 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {FIXEDDRIFT az=308.24 alfaangle=63.7 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p1_005 ra=120900.00 dec=85400.00} 2008-May-22 19:23:44 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 12 {ENDIF} 2008-May-22 19:23:44 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 15 {IF LSTSLEW(AGESVC1B_p1_074) < 114426 THEN} 2008-May-22 19:23:44 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 16 {FIXEDDRIFT az=314.27 alfaangle=58.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p1_074 ra=122900.00 dec=71030.00} 2008-May-22 19:23:44 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 19 {ENDIF} 2008-May-22 19:23:44 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 22 {IF LSTSLEW(AGESVC1B_p1_076) < 120726 THEN} 2008-May-22 19:23:44 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 23 {FIXEDDRIFT az=333.90 alfaangle=40.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p1_076 ra=122900.00 dec=70730.00} 2008-May-22 19:23:44 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 26 {ENDIF} 2008-May-22 19:23:44 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 29 {IF LSTSLEW(AGESVC1B_p1_078) < 123026 THEN} 2008-May-22 19:23:44 LOG4 exec_msg: From OBSERVER: store_command_file_line 14 30 {FIXEDDRIFT az=1.26 alfaangle=18.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p1_078 ra=122900.00 dec=70430.00} 2008-May-22 19:23:44 LOG4 exec_msg: From OBSERVER: store_command_file_line 15 33 {ENDIF} 2008-May-22 19:23:44 LOG4 exec_msg: From OBSERVER: store_command_file_line 16 36 {IF LSTSLEW(AGESVC1B_p1_080) < 125326 THEN} 2008-May-22 19:23:44 LOG4 exec_msg: From OBSERVER: store_command_file_line 17 37 {FIXEDDRIFT az=27.95 alfaangle=-4.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p1_080 ra=122900.00 dec=70130.00} 2008-May-22 19:23:44 LOG4 exec_msg: From OBSERVER: store_command_file_line 18 40 {ENDIF} 2008-May-22 19:23:44 LOG4 exec_msg: From OBSERVER: store_command_file_line 19 43 {IF LSTSLEW(AGESVC1B_p2_041) < 131626 THEN} 2008-May-22 19:23:44 LOG4 exec_msg: From OBSERVER: store_command_file_line 20 44 {FIXEDDRIFT az=49.21 alfaangle=-23.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p2_041 ra=122900.00 dec=80000.00} 2008-May-22 19:23:44 LOG4 exec_msg: From OBSERVER: store_command_file_line 21 47 {ENDIF} 2008-May-22 19:23:44 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-May-22 19:23:44 LOG4 exec_msg: From OBSERVER: run_command_file 080522_obs.cmd 1 1 21 2008-May-22 19:23:44 LOG4 run_command_file: Calling 'run_command_file 080522_obs.cmd 1 1 21' 2008-May-22 19:23:44 BEGIN begin_task: Starting task 'running command file '080522_obs.cmd'' 2008-May-22 19:23:44 LOG5 begin_task: Level: (1) ID = <10017> Status = 0 0 0 0 ok 2008-May-22 19:23:44 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '080522_obs.cmd' ...} 2008-May-22 19:23:44 NOTE run_command_file: Starting execution of command file '080522_obs.cmd' from line 1 2008-May-22 19:23:44 COMMAND run_command_line: EXECUTING command 3: 'LOAD ages_config.conf' 2008-May-22 19:23:44 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2008-May-22 19:23:44 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-May-22 19:23:44 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2008-May-22 19:23:44 NOTE CIMA-load_config_file: Loading configuration file 'ages_config.conf' 2008-May-22 19:23:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-May-22 19:23:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-May-22 19:23:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-May-22 19:23:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-May-22 19:23:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-May-22 19:23:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2008-May-22 19:23:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-May-22 19:23:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786" 2008-May-22 19:23:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786" 2008-May-22 19:23:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786" 2008-May-22 19:23:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786" 2008-May-22 19:23:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786" 2008-May-22 19:23:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786" 2008-May-22 19:23:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786" 2008-May-22 19:23:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786" 2008-May-22 19:23:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786" 2008-May-22 19:23:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-May-22 19:23:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-May-22 19:23:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-May-22 19:23:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-May-22 19:23:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-May-22 19:23:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-May-22 19:23:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-May-22 19:23:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-May-22 19:23:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-May-22 19:23:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-May-22 19:23:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-May-22 19:23:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-May-22 19:23:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-May-22 19:23:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2008-May-22 19:23:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-May-22 19:23:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-May-22 19:23:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-May-22 19:23:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-May-22 19:23:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-May-22 19:23:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-May-22 19:23:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-May-22 19:23:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-May-22 19:23:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-May-22 19:23:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1670.405752" 2008-May-22 19:23:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-May-22 19:23:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-May-22 19:23:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-May-22 19:23:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-May-22 19:23:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-May-22 19:23:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-May-22 19:23:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-May-22 19:23:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-May-22 19:23:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-May-22 19:23:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-May-22 19:23:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-May-22 19:23:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-May-22 19:23:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-May-22 19:23:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-May-22 19:23:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-May-22 19:23:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-May-22 19:23:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-May-22 19:23:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-May-22 19:23:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-May-22 19:23:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-May-22 19:23:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-May-22 19:23:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-May-22 19:23:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-May-22 19:23:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-May-22 19:23:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-May-22 19:23:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-May-22 19:23:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-May-22 19:23:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-May-22 19:23:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-May-22 19:23:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-May-22 19:23:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-May-22 19:23:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-May-22 19:23:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-May-22 19:23:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-May-22 19:23:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-May-22 19:23:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-May-22 19:23:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-May-22 19:23:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-May-22 19:23:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-May-22 19:23:46 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-May-22 19:23:46 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-May-22 19:23:46 LOG5 begin_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2008-May-22 19:23:46 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-May-22 19:23:46 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-May-22 19:23:46 LOG1 config_iflo: Receiver ALFA already selected 2008-May-22 19:23:46 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-May-22 19:23:46 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-May-22 19:23:46 START begin_task: Starting task 'waiting on command to ALFA' 2008-May-22 19:23:46 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2008-May-22 19:23:47 LOG4 got_alfamon: From ALFAMON: ACK 2008-May-22 19:23:47 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-May-22 19:23:47 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2008-May-22 19:23:47 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-May-22 19:23:47 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-May-22 19:23:47 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2008-May-22 19:23:47 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2008-May-22 19:23:47 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-May-22 19:23:47 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-May-22 19:23:47 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2008-May-22 19:23:47 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2008-May-22 19:23:47 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2008-May-22 19:23:47 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1670405752.0} 2008-May-22 19:23:47 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2008-May-22 19:23:47 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2008-May-22 19:23:47 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-May-22 19:23:47 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-May-22 19:23:47 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-May-22 19:23:47 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-May-22 19:23:47 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-May-22 19:23:47 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2008-May-22 19:23:47 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2008-May-22 19:23:47 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2008-May-22 19:23:47 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2008-May-22 19:23:47 LOG3 send_ifx: Skipping if2-command 'if2_gain 8 8' since system already is properly set 2008-May-22 19:23:47 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2008-May-22 19:23:47 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2008-May-22 19:23:47 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-May-22 19:23:47 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-22 19:23:47 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2008-May-22 19:23:47 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2008-May-22 19:23:47 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-May-22 19:23:47 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2008-May-22 19:23:47 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2008-May-22 19:23:47 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-May-22 19:23:47 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-May-22 19:23:47 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-May-22 19:23:47 LOG5 begin_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2008-May-22 19:23:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1670405752.0} 2008-May-22 19:23:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-22 19:23:47 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-May-22 19:23:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-22 19:23:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-22 19:23:47 LOG4 got_cormsg: From DATATAKING: DONE 2008-May-22 19:23:47 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-May-22 19:23:47 LOG5 end_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2008-May-22 19:23:47 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-May-22 19:23:47 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-May-22 19:23:47 LOG5 finish_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2008-May-22 19:23:47 DONE finish_task: DONE finished configuration: IF/LO path 2008-May-22 19:23:47 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-May-22 19:23:47 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-May-22 19:23:47 LOG5 end_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2008-May-22 19:23:47 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-May-22 19:23:47 LOG5 begin_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2008-May-22 19:23:47 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-May-22 19:23:47 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-May-22 19:23:47 START begin_task: Starting task 'selecting calibration port' 2008-May-22 19:23:47 LOG5 begin_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2008-May-22 19:23:47 LOG3 vw_send: To DATATAKING: calport 3 2008-May-22 19:23:47 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-May-22 19:23:47 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-May-22 19:23:47 START begin_task: Starting task 'waiting on calport' 2008-May-22 19:23:47 LOG5 begin_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2008-May-22 19:23:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-22 19:23:47 LOG4 got_cormsg: From DATATAKING: calport 3 2008-May-22 19:23:47 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-May-22 19:23:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-22 19:23:47 LOG4 got_cormsg: From DATATAKING: DONE 2008-May-22 19:23:47 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-May-22 19:23:47 LOG5 end_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2008-May-22 19:23:47 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-May-22 19:23:47 STOP finish_task: Finishing task 'selecting calibration port' 2008-May-22 19:23:47 LOG5 finish_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2008-May-22 19:23:47 INFO2 finish_task: DONE finished configuring: calibration port 2008-May-22 19:23:48 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-May-22 19:23:48 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-May-22 19:23:48 LOG5 end_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2008-May-22 19:23:48 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-May-22 19:23:48 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-May-22 19:23:48 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-May-22 19:23:48 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-May-22 19:23:48 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-May-22 19:23:48 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-May-22 19:23:48 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-May-22 19:23:48 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-May-22 19:23:48 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 SS&WVD 2008-May-22 19:23:48 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 SS&WVD 2008-May-22 19:23:48 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 SS&WVD 2008-May-22 19:23:48 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 SS&WVD 2008-May-22 19:23:48 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-May-22 19:23:48 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-May-22 19:23:48 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-May-22 19:23:48 LOG5 begin_task: Level: (3) ID = <10024> Status = 0 0 0 0 ok 2008-May-22 19:23:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-22 19:23:48 LOG3 CALCONTROL-caltrig: Software trigger 2008-May-22 19:23:48 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-May-22 19:23:48 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-May-22 19:23:48 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-May-22 19:23:48 LOG5 end_task: Level: (3) ID = <10024> Status = 0 0 0 0 ok 2008-May-22 19:23:48 LOG3 sock_errsend: To WAPPDATA: FLUSH 2008-May-22 19:23:48 STOP finish_task: Finishing task 'configuring WAPPs' 2008-May-22 19:23:48 LOG5 finish_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2008-May-22 19:23:48 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-May-22 19:23:48 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-May-22 19:23:48 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-May-22 19:23:48 LOG5 end_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2008-May-22 19:23:48 COMMAND run_command_line: EXECUTING command 4: 'SETUP FIXEDDRIFT calwhen=tracking calsecs=5' 2008-May-22 19:23:48 COMMAND run_command_line: EXECUTING command 5: 'CATALOG AGESFull.cat' 2008-May-22 19:23:48 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2008-May-22 19:23:48 COMMAND run_command_line: EXECUTING command 8: 'IF LSTSLEW(AGESVC1A_p1_005) < 112226 THEN' 2008-May-22 19:23:48 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGESVC1A_p1_005) < 112226 2008-May-22 19:23:48 INFO5 is_if_valid: Condition parsed as: 11.017893333333333 < 11.373888888888889 2008-May-22 19:23:49 COMMAND run_command_line: EXECUTING command 9: 'FIXEDDRIFT az=308.24 alfaangle=63.7 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p1_005 ra=120900.00 dec=85400.00' 2008-May-22 19:23:49 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-May-22 19:23:49 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-May-22 19:23:49 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-May-22 19:23:49 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-May-22 19:23:49 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 SS&WVD' 2008-May-22 19:23:49 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-May-22 19:23:49 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 308.24 63.7 hcorcal 5 tracking no first 1 AGESVC1A_p1_005 120900.00 85400.00 J 8500.0 Heliocentric velocity(optical)' 2008-May-22 19:23:49 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-May-22 19:23:49 LOG5 begin_task: Level: (2) ID = <10025> Status = 0 0 0 0 ok 2008-May-22 19:23:49 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'galfasrc2' 2008-May-22 19:23:49 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-May-22 19:23:49 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1A_p1_005} 2008-May-22 19:23:49 INFO3 fixed_driftmap: Sending telescope to Az = 308.24 and ZA = 14.84 2008-May-22 19:23:49 LOG3 track_source: Calling 'track_source AGESVC1A_p1_005 308.24 14.8431762012 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-May-22 19:23:49 START begin_task: Starting task 'sending tracking commands' 2008-May-22 19:23:49 LOG5 begin_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-May-22 19:23:49 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p1_005} INFO {Slewing to source 'AGESVC1A_p1_005' ...} 2008-May-22 19:23:49 INFO1 track_source: Starting to track AGESVC1A_p1_005 2008-May-22 19:23:49 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p1_005" 2008-May-22 19:23:49 LOG3 vw_send: To DATATAKING: set ra 308.24 2008-May-22 19:23:49 LOG3 vw_send: To DATATAKING: set dec 14.8431762012 2008-May-22 19:23:50 LOG3 vw_send: To DATATAKING: pnt tr send 2008-May-22 19:23:50 LOG3 vw_send: To DATATAKING: pnt tr 308.24 14.8431762012 -CF 2008-May-22 19:23:50 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-May-22 19:23:50 STOP finish_task: Finishing task 'sending tracking commands' 2008-May-22 19:23:50 LOG5 finish_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-May-22 19:23:50 INFO2 finish_task: DONE finished sending: tracking commands 2008-May-22 19:23:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-May-22 19:23:50 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-May-22 19:23:50 LOG5 end_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-May-22 19:23:50 START begin_task: Starting task 'rotate ALFA to +63.7 degrees' 2008-May-22 19:23:50 LOG5 begin_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2008-May-22 19:23:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +63.7 degrees ...} 2008-May-22 19:23:50 INFO2 rotate_alfa: ALFA commanded to +63.7 degrees 2008-May-22 19:23:50 LOG3 sock_errsend: To ALFAMOTOR: POSITION 63.7 REPLY 2008-May-22 19:23:50 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-May-22 19:23:50 START begin_task: Starting task 'waiting on ALFA rotation' 2008-May-22 19:23:50 LOG5 begin_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2008-May-22 19:23:50 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p1_005" 2008-May-22 19:23:50 LOG4 got_cormsg: From DATATAKING: set ra 308.24 2008-May-22 19:23:50 LOG4 got_cormsg: From DATATAKING: set dec 14.8431762012 2008-May-22 19:23:50 LOG4 got_cormsg: From DATATAKING: vw% 308.24 2008-May-22 19:23:50 LOG4 got_cormsg: From DATATAKING: vw% 14.8431762012 2008-May-22 19:23:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-22 19:23:50 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-May-22 19:23:50 LOG4 got_cormsg: From DATATAKING: pnt tr 308.24 14.8431762012 -CF 2008-May-22 19:23:50 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-May-22 19:23:50 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-May-22 19:23:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-22 19:26:20 ERROR end_wait_seconds: ERROR timed out while waiting for ALFA rotation! 2008-May-22 19:26:20 LOG1 task_failed: Task 'waiting on ALFA rotation' failed! 2008-May-22 19:26:20 LOG5 task_failed: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2008-May-22 19:26:20 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'FAILED' 2008-May-22 19:26:20 LOG5 end_task: Level: (4) ID = <10028> Status = 0 0 0 1 failed 2008-May-22 19:26:20 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-May-22 19:26:20 STOP finish_task: Finishing task 'rotate ALFA to +63.7 degrees' 2008-May-22 19:26:20 LOG5 finish_task: Level: (3) ID = <10027> Status = 0 0 0 1 failed 2008-May-22 19:26:20 ERROR finish_task: ERROR failed configuration: rotating ALFA to +63.7 degrees 2008-May-22 19:26:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Failed 2008-May-22 19:26:20 STOP end_task: Finishing task 'rotate ALFA to +63.7 degrees' with status 'FAILED' 2008-May-22 19:26:20 LOG5 end_task: Level: (3) ID = <10027> Status = 0 0 0 1 failed 2008-May-22 19:26:20 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-May-22 19:26:20 LOG5 finish_task: Level: (2) ID = <10025> Status = 0 0 0 1 failed 2008-May-22 19:26:20 ERROR finish_task: ERROR failed pattern: fixed azimuth drift map 2008-May-22 19:26:20 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2008-May-22 19:26:20 END end_task: Finishing task 'fixed azimuth drift map' with status 'FAILED' 2008-May-22 19:26:20 LOG5 end_task: Level: (2) ID = <10025> Status = 0 0 0 1 failed 2008-May-22 19:26:20 ALERT run_command_file: Stopping command file processing at line 9! 2008-May-22 19:26:20 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2008-May-22 19:26:20 STOP finish_task: Finishing task 'running command file '080522_obs.cmd'' 2008-May-22 19:26:20 LOG5 finish_task: Level: (1) ID = <10017> Status = 0 0 0 1 failed 2008-May-22 19:26:20 ERROR finish_task: ERROR failed running: command file '080522_obs.cmd' 2008-May-22 19:26:20 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2008-May-22 19:26:20 END end_task: Finishing task 'running command file '080522_obs.cmd'' with status 'FAILED' 2008-May-22 19:26:20 LOG5 end_task: Level: (1) ID = <10017> Status = 0 0 0 1 failed 2008-May-22 19:28:03 INFO1 CIMA-run_command_file: Transferring command file '080522_obs.cmd ' to executive ... 2008-May-22 19:28:03 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 3 {LOAD ages_config.conf} 2008-May-22 19:28:03 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 4 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5} 2008-May-22 19:28:03 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 5 {CATALOG AGESFull.cat} 2008-May-22 19:28:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {IF LSTSLEW(AGESVC1A_p1_005) < 112226 THEN} 2008-May-22 19:28:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {FIXEDDRIFT az=308.24 alfaangle=63.7 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p1_005 ra=120900.00 dec=85400.00} 2008-May-22 19:28:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 12 {ENDIF} 2008-May-22 19:28:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 15 {IF LSTSLEW(AGESVC1B_p1_074) < 114426 THEN} 2008-May-22 19:28:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 16 {FIXEDDRIFT az=314.27 alfaangle=58.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p1_074 ra=122900.00 dec=71030.00} 2008-May-22 19:28:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 19 {ENDIF} 2008-May-22 19:28:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 22 {IF LSTSLEW(AGESVC1B_p1_076) < 120726 THEN} 2008-May-22 19:28:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 23 {FIXEDDRIFT az=333.90 alfaangle=40.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p1_076 ra=122900.00 dec=70730.00} 2008-May-22 19:28:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 26 {ENDIF} 2008-May-22 19:28:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 29 {IF LSTSLEW(AGESVC1B_p1_078) < 123026 THEN} 2008-May-22 19:28:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 14 30 {FIXEDDRIFT az=1.26 alfaangle=18.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p1_078 ra=122900.00 dec=70430.00} 2008-May-22 19:28:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 15 33 {ENDIF} 2008-May-22 19:28:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 16 36 {IF LSTSLEW(AGESVC1B_p1_080) < 125326 THEN} 2008-May-22 19:28:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 17 37 {FIXEDDRIFT az=27.95 alfaangle=-4.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p1_080 ra=122900.00 dec=70130.00} 2008-May-22 19:28:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 18 40 {ENDIF} 2008-May-22 19:28:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 19 43 {IF LSTSLEW(AGESVC1B_p2_041) < 131626 THEN} 2008-May-22 19:28:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 20 44 {FIXEDDRIFT az=49.21 alfaangle=-23.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p2_041 ra=122900.00 dec=80000.00} 2008-May-22 19:28:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 21 47 {ENDIF} 2008-May-22 19:28:04 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-May-22 19:28:04 LOG4 exec_msg: From OBSERVER: run_command_file 080522_obs.cmd 1 1 21 2008-May-22 19:28:04 LOG4 run_command_file: Calling 'run_command_file 080522_obs.cmd 1 1 21' 2008-May-22 19:28:04 BEGIN begin_task: Starting task 'running command file '080522_obs.cmd'' 2008-May-22 19:28:04 LOG5 begin_task: Level: (1) ID = <10029> Status = 0 0 0 0 ok 2008-May-22 19:28:04 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '080522_obs.cmd' ...} 2008-May-22 19:28:04 NOTE run_command_file: Starting execution of command file '080522_obs.cmd' from line 1 2008-May-22 19:28:04 COMMAND run_command_line: EXECUTING command 3: 'LOAD ages_config.conf' 2008-May-22 19:28:04 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2008-May-22 19:28:04 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-May-22 19:28:04 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2008-May-22 19:28:04 NOTE CIMA-load_config_file: Loading configuration file 'ages_config.conf' 2008-May-22 19:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-May-22 19:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-May-22 19:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-May-22 19:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-May-22 19:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-May-22 19:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2008-May-22 19:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-May-22 19:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786" 2008-May-22 19:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786" 2008-May-22 19:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786" 2008-May-22 19:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786" 2008-May-22 19:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786" 2008-May-22 19:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786" 2008-May-22 19:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786" 2008-May-22 19:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786" 2008-May-22 19:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786" 2008-May-22 19:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-May-22 19:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-May-22 19:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-May-22 19:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-May-22 19:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-May-22 19:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-May-22 19:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-May-22 19:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-May-22 19:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-May-22 19:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-May-22 19:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-May-22 19:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-May-22 19:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-May-22 19:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2008-May-22 19:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-May-22 19:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-May-22 19:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-May-22 19:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-May-22 19:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-May-22 19:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-May-22 19:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-May-22 19:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-May-22 19:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-May-22 19:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1670.405752" 2008-May-22 19:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-May-22 19:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-May-22 19:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-May-22 19:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-May-22 19:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-May-22 19:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-May-22 19:28:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-May-22 19:28:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-May-22 19:28:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-May-22 19:28:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-May-22 19:28:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-May-22 19:28:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-May-22 19:28:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-May-22 19:28:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-May-22 19:28:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-May-22 19:28:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-May-22 19:28:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-May-22 19:28:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-May-22 19:28:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-May-22 19:28:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-May-22 19:28:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-May-22 19:28:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-May-22 19:28:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-May-22 19:28:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-May-22 19:28:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-May-22 19:28:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-May-22 19:28:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-May-22 19:28:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-May-22 19:28:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-May-22 19:28:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-May-22 19:28:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-May-22 19:28:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-May-22 19:28:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-May-22 19:28:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-May-22 19:28:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-May-22 19:28:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-May-22 19:28:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-May-22 19:28:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-May-22 19:28:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-May-22 19:28:06 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-May-22 19:28:06 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-May-22 19:28:06 LOG5 begin_task: Level: (2) ID = <10030> Status = 0 0 0 0 ok 2008-May-22 19:28:06 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-May-22 19:28:06 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-May-22 19:28:06 LOG1 config_iflo: Receiver ALFA already selected 2008-May-22 19:28:06 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-May-22 19:28:06 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-May-22 19:28:06 START begin_task: Starting task 'waiting on command to ALFA' 2008-May-22 19:28:06 LOG5 begin_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2008-May-22 19:28:06 LOG4 got_alfamon: From ALFAMON: ACK 2008-May-22 19:28:06 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-May-22 19:28:06 LOG5 end_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2008-May-22 19:28:06 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-May-22 19:28:06 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-May-22 19:28:06 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2008-May-22 19:28:06 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2008-May-22 19:28:06 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-May-22 19:28:06 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-May-22 19:28:06 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2008-May-22 19:28:06 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2008-May-22 19:28:06 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2008-May-22 19:28:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1670405752.0} 2008-May-22 19:28:06 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2008-May-22 19:28:06 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2008-May-22 19:28:06 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-May-22 19:28:06 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-May-22 19:28:06 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-May-22 19:28:06 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-May-22 19:28:06 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-May-22 19:28:06 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2008-May-22 19:28:06 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2008-May-22 19:28:06 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2008-May-22 19:28:06 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2008-May-22 19:28:06 LOG3 send_ifx: Skipping if2-command 'if2_gain 8 8' since system already is properly set 2008-May-22 19:28:06 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2008-May-22 19:28:06 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2008-May-22 19:28:06 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-May-22 19:28:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-22 19:28:06 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2008-May-22 19:28:06 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2008-May-22 19:28:06 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-May-22 19:28:06 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2008-May-22 19:28:06 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2008-May-22 19:28:06 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-May-22 19:28:07 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-May-22 19:28:07 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-May-22 19:28:07 LOG5 begin_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2008-May-22 19:28:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1670405752.0} 2008-May-22 19:28:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-22 19:28:07 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-May-22 19:28:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-22 19:28:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-22 19:28:07 LOG4 got_cormsg: From DATATAKING: DONE 2008-May-22 19:28:07 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-May-22 19:28:07 LOG5 end_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2008-May-22 19:28:07 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-May-22 19:28:07 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-May-22 19:28:07 LOG5 finish_task: Level: (2) ID = <10030> Status = 0 0 0 0 ok 2008-May-22 19:28:07 DONE finish_task: DONE finished configuration: IF/LO path 2008-May-22 19:28:07 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-May-22 19:28:07 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-May-22 19:28:07 LOG5 end_task: Level: (2) ID = <10030> Status = 0 0 0 0 ok 2008-May-22 19:28:07 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-May-22 19:28:07 LOG5 begin_task: Level: (2) ID = <10033> Status = 0 0 0 0 ok 2008-May-22 19:28:07 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-May-22 19:28:07 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-May-22 19:28:07 START begin_task: Starting task 'selecting calibration port' 2008-May-22 19:28:07 LOG5 begin_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2008-May-22 19:28:07 LOG3 vw_send: To DATATAKING: calport 3 2008-May-22 19:28:07 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-May-22 19:28:07 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-May-22 19:28:07 START begin_task: Starting task 'waiting on calport' 2008-May-22 19:28:07 LOG5 begin_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2008-May-22 19:28:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-22 19:28:07 LOG4 got_cormsg: From DATATAKING: calport 3 2008-May-22 19:28:07 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-May-22 19:28:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-22 19:28:07 LOG4 got_cormsg: From DATATAKING: DONE 2008-May-22 19:28:07 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-May-22 19:28:07 LOG5 end_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2008-May-22 19:28:07 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-May-22 19:28:07 STOP finish_task: Finishing task 'selecting calibration port' 2008-May-22 19:28:07 LOG5 finish_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2008-May-22 19:28:07 INFO2 finish_task: DONE finished configuring: calibration port 2008-May-22 19:28:07 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-May-22 19:28:07 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-May-22 19:28:07 LOG5 end_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2008-May-22 19:28:07 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-May-22 19:28:07 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-May-22 19:28:07 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-May-22 19:28:07 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-May-22 19:28:07 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-May-22 19:28:07 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-May-22 19:28:07 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-May-22 19:28:08 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-May-22 19:28:08 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 SS&WVD 2008-May-22 19:28:08 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 SS&WVD 2008-May-22 19:28:08 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 SS&WVD 2008-May-22 19:28:08 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 SS&WVD 2008-May-22 19:28:08 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-May-22 19:28:08 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-May-22 19:28:08 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-May-22 19:28:08 LOG5 begin_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2008-May-22 19:28:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-22 19:28:08 LOG3 CALCONTROL-caltrig: Software trigger 2008-May-22 19:28:08 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-May-22 19:28:08 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-May-22 19:28:08 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-May-22 19:28:08 LOG5 end_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2008-May-22 19:28:08 LOG3 sock_errsend: To WAPPDATA: FLUSH 2008-May-22 19:28:08 STOP finish_task: Finishing task 'configuring WAPPs' 2008-May-22 19:28:08 LOG5 finish_task: Level: (2) ID = <10033> Status = 0 0 0 0 ok 2008-May-22 19:28:08 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-May-22 19:28:08 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-May-22 19:28:08 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-May-22 19:28:08 LOG5 end_task: Level: (2) ID = <10033> Status = 0 0 0 0 ok 2008-May-22 19:28:08 COMMAND run_command_line: EXECUTING command 4: 'SETUP FIXEDDRIFT calwhen=tracking calsecs=5' 2008-May-22 19:28:08 COMMAND run_command_line: EXECUTING command 5: 'CATALOG AGESFull.cat' 2008-May-22 19:28:08 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2008-May-22 19:28:08 COMMAND run_command_line: EXECUTING command 8: 'IF LSTSLEW(AGESVC1A_p1_005) < 112226 THEN' 2008-May-22 19:28:08 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGESVC1A_p1_005) < 112226 2008-May-22 19:28:08 INFO5 is_if_valid: Condition parsed as: 11.105313333333333 < 11.373888888888889 2008-May-22 19:28:08 COMMAND run_command_line: EXECUTING command 9: 'FIXEDDRIFT az=308.24 alfaangle=63.7 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p1_005 ra=120900.00 dec=85400.00' 2008-May-22 19:28:08 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-May-22 19:28:08 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-May-22 19:28:08 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-May-22 19:28:08 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-May-22 19:28:08 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 SS&WVD' 2008-May-22 19:28:09 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-May-22 19:28:09 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 308.24 63.7 hcorcal 5 tracking no first 1 AGESVC1A_p1_005 120900.00 85400.00 J 8500.0 Heliocentric velocity(optical)' 2008-May-22 19:28:09 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-May-22 19:28:09 LOG5 begin_task: Level: (2) ID = <10037> Status = 0 0 0 0 ok 2008-May-22 19:28:09 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGESVC1A_p1_005' 2008-May-22 19:28:09 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-May-22 19:28:09 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1A_p1_005} 2008-May-22 19:28:09 INFO3 fixed_driftmap: Sending telescope to Az = 308.24 and ZA = 14.84 2008-May-22 19:28:09 LOG3 track_source: Calling 'track_source AGESVC1A_p1_005 308.24 14.8431761362 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-May-22 19:28:09 START begin_task: Starting task 'sending tracking commands' 2008-May-22 19:28:09 LOG5 begin_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2008-May-22 19:28:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p1_005} INFO {Slewing to source 'AGESVC1A_p1_005' ...} 2008-May-22 19:28:09 INFO1 track_source: Starting to track AGESVC1A_p1_005 2008-May-22 19:28:09 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p1_005" 2008-May-22 19:28:09 LOG3 vw_send: To DATATAKING: set ra 308.24 2008-May-22 19:28:09 LOG3 vw_send: To DATATAKING: set dec 14.8431761362 2008-May-22 19:28:09 LOG3 vw_send: To DATATAKING: pnt tr send 2008-May-22 19:28:09 LOG3 vw_send: To DATATAKING: pnt tr 308.24 14.8431761362 -CF 2008-May-22 19:28:09 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-May-22 19:28:09 STOP finish_task: Finishing task 'sending tracking commands' 2008-May-22 19:28:09 LOG5 finish_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2008-May-22 19:28:09 INFO2 finish_task: DONE finished sending: tracking commands 2008-May-22 19:28:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-May-22 19:28:09 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-May-22 19:28:09 LOG5 end_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2008-May-22 19:28:09 START begin_task: Starting task 'rotate ALFA to +63.7 degrees' 2008-May-22 19:28:09 LOG5 begin_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2008-May-22 19:28:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +63.7 degrees ...} 2008-May-22 19:28:09 INFO2 rotate_alfa: ALFA commanded to +63.7 degrees 2008-May-22 19:28:09 LOG3 sock_errsend: To ALFAMOTOR: POSITION 63.7 REPLY 2008-May-22 19:28:09 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-May-22 19:28:09 START begin_task: Starting task 'waiting on ALFA rotation' 2008-May-22 19:28:09 LOG5 begin_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2008-May-22 19:28:09 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p1_005" 2008-May-22 19:28:09 LOG4 got_cormsg: From DATATAKING: set ra 308.24 2008-May-22 19:28:09 LOG4 got_cormsg: From DATATAKING: vw% 308.24 2008-May-22 19:28:09 LOG4 got_cormsg: From DATATAKING: 2008-May-22 19:28:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-22 19:28:09 LOG4 got_cormsg: From DATATAKING: set dec 14.8431761362 2008-May-22 19:28:09 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-May-22 19:28:09 LOG4 got_cormsg: From DATATAKING: pnt tr 308.24 14.8431761362 -CF 2008-May-22 19:28:09 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-May-22 19:28:09 LOG4 got_cormsg: From DATATAKING: 14.8431761362 2008-May-22 19:28:09 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2008-May-22 19:30:39 ERROR end_wait_seconds: ERROR timed out while waiting for ALFA rotation! 2008-May-22 19:30:39 LOG1 task_failed: Task 'waiting on ALFA rotation' failed! 2008-May-22 19:30:39 LOG5 task_failed: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2008-May-22 19:30:39 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'FAILED' 2008-May-22 19:30:39 LOG5 end_task: Level: (4) ID = <10040> Status = 0 0 0 1 failed 2008-May-22 19:30:39 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-May-22 19:30:39 STOP finish_task: Finishing task 'rotate ALFA to +63.7 degrees' 2008-May-22 19:30:39 LOG5 finish_task: Level: (3) ID = <10039> Status = 0 0 0 1 failed 2008-May-22 19:30:39 ERROR finish_task: ERROR failed configuration: rotating ALFA to +63.7 degrees 2008-May-22 19:30:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Failed 2008-May-22 19:30:39 STOP end_task: Finishing task 'rotate ALFA to +63.7 degrees' with status 'FAILED' 2008-May-22 19:30:39 LOG5 end_task: Level: (3) ID = <10039> Status = 0 0 0 1 failed 2008-May-22 19:30:39 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-May-22 19:30:39 LOG5 finish_task: Level: (2) ID = <10037> Status = 0 0 0 1 failed 2008-May-22 19:30:39 ERROR finish_task: ERROR failed pattern: fixed azimuth drift map 2008-May-22 19:30:39 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2008-May-22 19:30:39 END end_task: Finishing task 'fixed azimuth drift map' with status 'FAILED' 2008-May-22 19:30:39 LOG5 end_task: Level: (2) ID = <10037> Status = 0 0 0 1 failed 2008-May-22 19:30:40 ALERT run_command_file: Stopping command file processing at line 9! 2008-May-22 19:30:40 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2008-May-22 19:30:40 STOP finish_task: Finishing task 'running command file '080522_obs.cmd'' 2008-May-22 19:30:40 LOG5 finish_task: Level: (1) ID = <10029> Status = 0 0 0 1 failed 2008-May-22 19:30:40 ERROR finish_task: ERROR failed running: command file '080522_obs.cmd' 2008-May-22 19:30:40 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2008-May-22 19:30:40 END end_task: Finishing task 'running command file '080522_obs.cmd'' with status 'FAILED' 2008-May-22 19:30:40 LOG5 end_task: Level: (1) ID = <10029> Status = 0 0 0 1 failed 2008-May-22 19:30:47 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-May-22 19:30:47 LOG4 exec_msg: From OBSERVER: run_command_file 080522_obs.cmd 8 1 21 2008-May-22 19:30:47 LOG4 run_command_file: Calling 'run_command_file 080522_obs.cmd 8 1 21' 2008-May-22 19:30:47 BEGIN begin_task: Starting task 'running command file '080522_obs.cmd'' 2008-May-22 19:30:47 LOG5 begin_task: Level: (1) ID = <10041> Status = 0 0 0 0 ok 2008-May-22 19:30:47 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '080522_obs.cmd' ...} 2008-May-22 19:30:47 NOTE run_command_file: Starting execution of command file '080522_obs.cmd' from line 8 2008-May-22 19:30:47 COMMAND run_command_line: EXECUTING command 8: 'IF LSTSLEW(AGESVC1A_p1_005) < 112226 THEN' 2008-May-22 19:30:47 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGESVC1A_p1_005) < 112226 2008-May-22 19:30:47 INFO5 is_if_valid: Condition parsed as: 11.146545999999999 < 11.373888888888889 2008-May-22 19:30:47 COMMAND run_command_line: EXECUTING command 9: 'FIXEDDRIFT az=308.24 alfaangle=63.7 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p1_005 ra=120900.00 dec=85400.00' 2008-May-22 19:30:47 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-May-22 19:30:48 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-May-22 19:30:48 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 308.24 63.7 hcorcal 5 tracking no first 1 AGESVC1A_p1_005 120900.00 85400.00 J 8500.0 Heliocentric velocity(optical)' 2008-May-22 19:30:48 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-May-22 19:30:48 LOG5 begin_task: Level: (2) ID = <10042> Status = 0 0 0 0 ok 2008-May-22 19:30:48 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGESVC1A_p1_005' 2008-May-22 19:30:48 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-May-22 19:30:48 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1A_p1_005} 2008-May-22 19:30:48 INFO3 fixed_driftmap: Sending telescope to Az = 308.24 and ZA = 14.84 2008-May-22 19:30:48 LOG3 track_source: Calling 'track_source AGESVC1A_p1_005 308.24 14.8431760961 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-May-22 19:30:48 START begin_task: Starting task 'sending tracking commands' 2008-May-22 19:30:48 LOG5 begin_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2008-May-22 19:30:48 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p1_005} INFO {Slewing to source 'AGESVC1A_p1_005' ...} 2008-May-22 19:30:48 INFO1 track_source: Starting to track AGESVC1A_p1_005 2008-May-22 19:30:48 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p1_005" 2008-May-22 19:30:48 LOG3 vw_send: To DATATAKING: set ra 308.24 2008-May-22 19:30:48 LOG3 vw_send: To DATATAKING: set dec 14.8431760961 2008-May-22 19:30:48 LOG3 vw_send: To DATATAKING: pnt tr send 2008-May-22 19:30:48 LOG3 vw_send: To DATATAKING: pnt tr 308.24 14.8431760961 -CF 2008-May-22 19:30:48 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-May-22 19:30:48 STOP finish_task: Finishing task 'sending tracking commands' 2008-May-22 19:30:48 LOG5 finish_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2008-May-22 19:30:48 INFO2 finish_task: DONE finished sending: tracking commands 2008-May-22 19:30:48 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-May-22 19:30:48 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-May-22 19:30:48 LOG5 end_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2008-May-22 19:30:48 START begin_task: Starting task 'rotate ALFA to +63.7 degrees' 2008-May-22 19:30:48 LOG5 begin_task: Level: (3) ID = <10044> Status = 0 0 0 0 ok 2008-May-22 19:30:48 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +63.7 degrees ...} 2008-May-22 19:30:48 INFO2 rotate_alfa: ALFA commanded to +63.7 degrees 2008-May-22 19:30:48 LOG3 sock_errsend: To ALFAMOTOR: POSITION 63.7 REPLY 2008-May-22 19:30:48 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-May-22 19:30:48 START begin_task: Starting task 'waiting on ALFA rotation' 2008-May-22 19:30:48 LOG5 begin_task: Level: (4) ID = <10045> Status = 0 0 0 0 ok 2008-May-22 19:30:48 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p1_005" 2008-May-22 19:30:48 LOG4 got_cormsg: From DATATAKING: set ra 308.24 2008-May-22 19:30:48 LOG4 got_cormsg: From DATATAKING: set dec 14.8431760961 2008-May-22 19:30:48 LOG4 got_cormsg: From DATATAKING: vw% 308.24 2008-May-22 19:30:48 LOG4 got_cormsg: From DATATAKING: vw% 14.8431760961 2008-May-22 19:30:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-22 19:30:48 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-May-22 19:30:48 LOG4 got_cormsg: From DATATAKING: pnt tr 308.24 14.8431760961 -CF 2008-May-22 19:30:48 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-May-22 19:30:48 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-May-22 19:30:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-22 19:31:08 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-May-22 19:31:08 INFO3 alfa_motor: ALFA rotator in-position +63.70 degrees 2008-May-22 19:31:08 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-May-22 19:31:08 LOG5 end_task: Level: (4) ID = <10045> Status = 0 0 0 0 ok 2008-May-22 19:31:08 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-May-22 19:31:08 STOP finish_task: Finishing task 'rotate ALFA to +63.7 degrees' 2008-May-22 19:31:08 LOG5 finish_task: Level: (3) ID = <10044> Status = 0 0 0 0 ok 2008-May-22 19:31:08 INFO2 finish_task: DONE finished configuration: rotating ALFA to +63.7 degrees 2008-May-22 19:31:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-May-22 19:31:08 STOP end_task: Finishing task 'rotate ALFA to +63.7 degrees' with status 'OK' 2008-May-22 19:31:08 LOG5 end_task: Level: (3) ID = <10044> Status = 0 0 0 0 ok 2008-May-22 19:31:08 START begin_task: Starting task 'waiting on telescope' 2008-May-22 19:31:08 LOG5 begin_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2008-May-22 19:31:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-May-22 19:31:08 LOG3 waittrk: Start waittrk 5 2008-May-22 19:31:08 START begin_task: Starting task 'waiting on telescope movement' 2008-May-22 19:31:08 LOG5 begin_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2008-May-22 19:31:13 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-May-22 19:31:13 LOG5 end_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2008-May-22 19:31:13 START begin_task: Starting task 'waiting on telescope on source' 2008-May-22 19:31:13 LOG5 begin_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2008-May-22 19:31:13 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-May-22 19:31:13 LOG5 end_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2008-May-22 19:31:13 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-May-22 19:31:13 INFO2 waittrk: Now tracking AGESVC1A_p1_005 2008-May-22 19:31:13 LOG4 waittrk: Current telescope position: Az = 307.85 ZA = 14.84 2008-May-22 19:31:13 STOP finish_task: Finishing task 'waiting on telescope' 2008-May-22 19:31:13 LOG5 finish_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2008-May-22 19:31:13 INFO2 finish_task: DONE finished waiting: telescope on source 2008-May-22 19:31:13 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-May-22 19:31:13 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-May-22 19:31:13 LOG5 end_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2008-May-22 19:31:13 START begin_task: Starting task 'selecting calibration type' 2008-May-22 19:31:13 LOG5 begin_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2008-May-22 19:31:13 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-May-22 19:31:13 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-May-22 19:31:13 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-May-22 19:31:13 START begin_task: Starting task 'waiting on setcal' 2008-May-22 19:31:13 LOG5 begin_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2008-May-22 19:31:13 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-May-22 19:31:13 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-May-22 19:31:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-22 19:31:14 LOG4 got_cormsg: From DATATAKING: DONE 2008-May-22 19:31:14 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-May-22 19:31:14 LOG5 end_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2008-May-22 19:31:14 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-May-22 19:31:14 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-May-22 19:31:14 LOG3 socket_wait: To ALFAMON: CAL HI 2008-May-22 19:31:14 START begin_task: Starting task 'waiting on command to ALFA' 2008-May-22 19:31:14 LOG5 begin_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2008-May-22 19:31:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-22 19:31:14 LOG4 got_alfamon: From ALFAMON: ACK 2008-May-22 19:31:14 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-May-22 19:31:14 LOG5 end_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2008-May-22 19:31:14 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-May-22 19:31:14 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-May-22 19:31:14 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-May-22 19:31:14 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-May-22 19:31:14 START begin_task: Starting task 'waiting on command to ALFA' 2008-May-22 19:31:14 LOG5 begin_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2008-May-22 19:31:14 LOG4 got_alfamon: From ALFAMON: ACK 2008-May-22 19:31:14 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-May-22 19:31:14 LOG5 end_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2008-May-22 19:31:14 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-May-22 19:31:14 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-May-22 19:31:14 STOP finish_task: Finishing task 'selecting calibration type' 2008-May-22 19:31:14 LOG5 finish_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2008-May-22 19:31:14 INFO2 finish_task: DONE finished configuring: calibration type 2008-May-22 19:31:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-May-22 19:31:14 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-May-22 19:31:14 LOG5 end_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2008-May-22 19:31:14 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2008-May-22 19:31:14 INFO2 astwait: Waiting for 802 seconds from 23:31:14 to 23:44:36 UTC ... 2008-May-22 19:31:14 LOG4 send_obs_status: To obs_status: <1> TASKTIME 802 BITMAP stat_wait MESSAGE {Waiting ...} 2008-May-22 19:31:14 START begin_task: Starting task 'waiting on waiting for AST time' 2008-May-22 19:31:14 LOG5 begin_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2008-May-22 19:38:43 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 19:38:43.303 (seconds: 70723.303)!} 2008-May-22 19:38:43 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 19:38:43.303 (seconds: 70723.303)! 2008-May-22 19:44:36 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2008-May-22 19:44:36 LOG5 end_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2008-May-22 19:44:36 INFO3 astwait: Finished waiting 2008-May-22 19:44:36 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-May-22 19:44:36 LOG5 dopset_later: Calling 'dopset_later 61.154710416930648' 2008-May-22 19:44:36 INFO3 dopset_later: Setting Doppler correction for 19:45:36 (61.2 seconds from now) 2008-May-22 19:44:36 LOG5 antvel: Calling 'antvel 308.240000 14.843176 F 61.154710416930648' 2008-May-22 19:44:36 LOG2 antvel: Transforming current Az = 308.24 ZA = 14.84 to apparent RA = 12:09:26.8 Dec = +08:51:07.0 2008-May-22 19:44:36 LOG2 antvel: Parameters to Doppler: Heliocentric 85536 2008 143 0.0 2008-May-22 19:44:36 INFO5 antvel: Computed antenna velocity: +25.77686 km/s 2008-May-22 19:44:36 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=25.7768586145 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-May-22 19:44:36 INFO4 dopset_gen: New sky frequencies: 1381.124676 1381.124676 1381.124676 1381.124676 1381.124676 1381.124676 1381.124676 1381.124676 1381.124676 2008-May-22 19:44:36 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.124676 sky0=1381.124676 sky1=1381.124676 sky2=1381.124676 sky3=1381.124676 sky4=1381.124676 sky5=1381.124676 sky6=1381.124676 sky7=1381.124676 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-May-22 19:44:36 LOG2 dopset_gen: Result from 'sky2syn': 1631.124676 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-May-22 19:44:36 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631124676.0} 2008-May-22 19:44:36 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-22 19:44:36 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-May-22 19:44:36 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-May-22 19:44:36 INFO5 fixed_driftmap: Tracking J2000 position: RA = 12:08:02.9 Dec = +08:53:55.1 2008-May-22 19:44:36 LOG3 track_source: Calling 'track_source AGESVC1A_p1_005 120802.9 085355.1 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-May-22 19:44:36 START begin_task: Starting task 'sending tracking commands' 2008-May-22 19:44:36 LOG5 begin_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2008-May-22 19:44:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p1_005} INFO {Slewing to source 'AGESVC1A_p1_005' ...} 2008-May-22 19:44:36 INFO1 track_source: Starting to track AGESVC1A_p1_005 2008-May-22 19:44:36 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p1_005" 2008-May-22 19:44:36 LOG3 vw_send: To DATATAKING: set ra 120802.9 2008-May-22 19:44:36 LOG3 vw_send: To DATATAKING: set dec 085355.1 2008-May-22 19:44:36 LOG3 vw_send: To DATATAKING: pnt tr send 2008-May-22 19:44:36 LOG3 vw_send: To DATATAKING: pnt tr 120802.9 085355.1 -CJ 2008-May-22 19:44:36 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-May-22 19:44:36 STOP finish_task: Finishing task 'sending tracking commands' 2008-May-22 19:44:36 LOG5 finish_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2008-May-22 19:44:36 INFO2 finish_task: DONE finished sending: tracking commands 2008-May-22 19:44:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-May-22 19:44:36 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-May-22 19:44:36 LOG5 end_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2008-May-22 19:44:36 START begin_task: Starting task 'waiting on telescope' 2008-May-22 19:44:36 LOG5 begin_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2008-May-22 19:44:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-May-22 19:44:36 LOG3 waittrk: Start waittrk 5 2008-May-22 19:44:36 START begin_task: Starting task 'waiting on telescope movement' 2008-May-22 19:44:36 LOG5 begin_task: Level: (4) ID = <10056> Status = 0 0 0 0 ok 2008-May-22 19:44:36 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631124676.0} 2008-May-22 19:44:36 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-22 19:44:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-22 19:44:36 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p1_005" 2008-May-22 19:44:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-22 19:44:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-22 19:44:36 LOG4 got_cormsg: From DATATAKING: set ra 120802.9 2008-May-22 19:44:36 LOG4 got_cormsg: From DATATAKING: set dec 085355.1 2008-May-22 19:44:36 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-May-22 19:44:36 LOG4 got_cormsg: From DATATAKING: pnt tr 120802.9 085355.1 -CJ 2008-May-22 19:44:36 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-May-22 19:44:36 LOG4 got_cormsg: From DATATAKING: 120802.9 2008-May-22 19:44:36 LOG4 got_cormsg: From DATATAKING: vw% 085355.1 2008-May-22 19:44:36 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2008-May-22 19:44:41 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-May-22 19:44:41 LOG5 end_task: Level: (4) ID = <10056> Status = 0 0 0 0 ok 2008-May-22 19:44:41 START begin_task: Starting task 'waiting on telescope on source' 2008-May-22 19:44:41 LOG5 begin_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2008-May-22 19:44:43 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-May-22 19:44:43 LOG5 end_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2008-May-22 19:44:43 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-May-22 19:44:43 INFO2 waittrk: Now tracking AGESVC1A_p1_005 2008-May-22 19:44:43 LOG4 waittrk: Current telescope position: Az = 307.90 ZA = 14.82 2008-May-22 19:44:43 STOP finish_task: Finishing task 'waiting on telescope' 2008-May-22 19:44:43 LOG5 finish_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2008-May-22 19:44:43 INFO2 finish_task: DONE finished waiting: telescope on source 2008-May-22 19:44:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-May-22 19:44:43 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-May-22 19:44:43 LOG5 end_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2008-May-22 19:44:43 START begin_task: Starting task 'adjusting WAPP power' 2008-May-22 19:44:43 LOG5 begin_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2008-May-22 19:44:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-May-22 19:44:43 INFO2 adjust_power: Starting to adjust WAPP power 2008-May-22 19:44:43 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-May-22 19:44:43 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-May-22 19:44:43 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-May-22 19:44:43 START begin_task: Starting task 'waiting on adjpwrif2' 2008-May-22 19:44:43 LOG5 begin_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2008-May-22 19:44:44 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-May-22 19:44:44 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-May-22 19:44:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-22 19:44:47 LOG4 got_cormsg: From DATATAKING: DONE 2008-May-22 19:44:47 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-May-22 19:44:47 LOG5 end_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2008-May-22 19:44:47 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-May-22 19:44:47 START begin_task: Starting task 'adjusting WAPP power' 2008-May-22 19:44:47 LOG5 begin_task: Level: (4) ID = <10060> Status = 0 0 0 0 ok 2008-May-22 19:44:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-May-22 19:44:47 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-May-22 19:44:47 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-May-22 19:44:47 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-May-22 19:44:47 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-May-22 19:44:47 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-May-22 19:44:47 LOG5 begin_task: Level: (5) ID = <10061> Status = 0 0 0 0 ok 2008-May-22 19:44:47 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-May-22 19:44:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-22 19:44:47 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 6 dB --- beam 1: 8 6 dB 2008-May-22 19:44:47 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 3 dB --- beam 5: 6 6 dB 2008-May-22 19:44:47 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-May-22 19:44:47 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 2 3 dB 2008-May-22 19:44:47 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-May-22 19:44:47 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-May-22 19:44:47 LOG5 end_task: Level: (5) ID = <10061> Status = 0 0 0 0 ok 2008-May-22 19:44:47 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.069 1.097 ALFA beam 1: 0.884 1.099 2008-May-22 19:44:47 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.088 1.052 ALFA beam 3: 1.014 1.045 2008-May-22 19:44:47 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.056 0.935 ALFA beam 5: 1.032 0.967 2008-May-22 19:44:47 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.995 0.986 ALFA beam 7: 1.090 0.878 2008-May-22 19:44:47 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-May-22 19:44:47 LOG5 finish_task: Level: (4) ID = <10060> Status = 0 0 0 0 ok 2008-May-22 19:44:47 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-May-22 19:44:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-May-22 19:44:47 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-May-22 19:44:47 LOG5 end_task: Level: (4) ID = <10060> Status = 0 0 0 0 ok 2008-May-22 19:44:47 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-May-22 19:44:47 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-May-22 19:44:48 LOG5 finish_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2008-May-22 19:44:48 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-May-22 19:44:48 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-May-22 19:44:48 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-May-22 19:44:48 LOG5 end_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2008-May-22 19:44:48 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 SS&WVD 2008-May-22 19:44:48 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 SS&WVD 2008-May-22 19:44:48 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 SS&WVD 2008-May-22 19:44:48 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 SS&WVD 2008-May-22 19:44:48 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20080522.a2048.0000.fits' is empty! 2008-May-22 19:44:48 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-May-22 19:44:48 START begin_task: Starting task 'WAPP calibration' 2008-May-22 19:44:48 LOG5 begin_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2008-May-22 19:44:48 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-May-22 19:44:48 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-May-22 19:44:48 START begin_task: Starting task 'selecting calibration type' 2008-May-22 19:44:48 LOG5 begin_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2008-May-22 19:44:48 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-May-22 19:44:48 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-May-22 19:44:48 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-May-22 19:44:48 START begin_task: Starting task 'waiting on setcal' 2008-May-22 19:44:48 LOG5 begin_task: Level: (5) ID = <10064> Status = 0 0 0 0 ok 2008-May-22 19:44:48 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 SS&WVD' 2008-May-22 19:44:48 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-May-22 19:44:48 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-May-22 19:44:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-22 19:44:48 LOG4 got_cormsg: From DATATAKING: DONE 2008-May-22 19:44:48 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-May-22 19:44:48 LOG5 end_task: Level: (5) ID = <10064> Status = 0 0 0 0 ok 2008-May-22 19:44:48 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-May-22 19:44:48 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-May-22 19:44:48 LOG3 socket_wait: To ALFAMON: CAL HI 2008-May-22 19:44:48 START begin_task: Starting task 'waiting on command to ALFA' 2008-May-22 19:44:48 LOG5 begin_task: Level: (5) ID = <10065> Status = 0 0 0 0 ok 2008-May-22 19:44:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-22 19:44:48 LOG4 got_alfamon: From ALFAMON: ACK 2008-May-22 19:44:48 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-May-22 19:44:48 LOG5 end_task: Level: (5) ID = <10065> Status = 0 0 0 0 ok 2008-May-22 19:44:48 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-May-22 19:44:48 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-May-22 19:44:48 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-May-22 19:44:48 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-May-22 19:44:48 START begin_task: Starting task 'waiting on command to ALFA' 2008-May-22 19:44:48 LOG5 begin_task: Level: (5) ID = <10066> Status = 0 0 0 0 ok 2008-May-22 19:44:48 LOG4 got_alfamon: From ALFAMON: ACK 2008-May-22 19:44:48 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-May-22 19:44:48 LOG5 end_task: Level: (5) ID = <10066> Status = 0 0 0 0 ok 2008-May-22 19:44:48 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-May-22 19:44:48 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-May-22 19:44:48 STOP finish_task: Finishing task 'selecting calibration type' 2008-May-22 19:44:48 LOG5 finish_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2008-May-22 19:44:48 INFO3 finish_task: DONE finished configuring: calibration type 2008-May-22 19:44:48 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-May-22 19:44:49 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-May-22 19:44:49 LOG5 end_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2008-May-22 19:44:49 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-May-22 19:44:49 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-May-22 19:44:49 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-May-22 19:44:49 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-May-22 19:44:49 LOG5 begin_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2008-May-22 19:44:49 LOG3 CALCONTROL-caltrig: Software trigger 2008-May-22 19:44:49 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-May-22 19:44:49 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-May-22 19:44:49 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-May-22 19:44:49 LOG5 end_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2008-May-22 19:44:49 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-May-22 19:44:49 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-May-22 19:44:49 START begin_task: Starting task 'WAPP spectral observation' 2008-May-22 19:44:49 LOG5 begin_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2008-May-22 19:44:49 INFO3 take_spectra: Starting take_spectra 5 5 2008-May-22 19:44:49 LOG5 log_alfabeam: Parameters: 12.134138888888886 8.8986388888888897 11.360797 2008.3937653053465 63.699997 2008-May-22 19:44:49 LOG4 log_alfabeam: ALFABEAM 0 12.134138888888883 8.898638888888884 2008-May-22 19:44:49 LOG4 log_alfabeam: ALFABEAM 1 12.131860266755609 8.995035800146187 2008-May-22 19:44:49 LOG4 log_alfabeam: ALFABEAM 2 12.127488610711316 8.931232219840338 2008-May-22 19:44:49 LOG4 log_alfabeam: ALFABEAM 3 12.129729813396581 8.834656953675083 2008-May-22 19:44:49 LOG4 log_alfabeam: ALFABEAM 4 12.136381323419293 8.801902992902184 2008-May-22 19:44:49 LOG4 log_alfabeam: ALFABEAM 5 12.140805172405864 8.866475268773957 2008-May-22 19:44:49 LOG4 log_alfabeam: ALFABEAM 6 12.138525269731399 8.963032800021161 2008-May-22 19:44:49 INFO2 take_spectra: Starting WAPP scan: 814300201 2008-May-22 19:44:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-May-22 19:44:49 START begin_task: Starting task 'waiting on WAPP spectra' 2008-May-22 19:44:49 LOG5 begin_task: Level: (5) ID = <10069> Status = 0 0 0 0 ok 2008-May-22 19:44:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-22 19:44:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85490.00 2008-May-22 19:44:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.124676 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-22 19:44:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.124676 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-22 19:44:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.124676 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-22 19:44:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.124676 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-22 19:44:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky