2008-May-13 20:01:19 BEGIN executive: CIMA executive starting ... 2008-May-13 20:01:19 NOTE executive: STARTING NEW CIMA SESSION 2008-May-13 20:01:19 INFO1 executive: Using CIMA version 2.3.xx 'unusable' from 2008-05-12 18:19 2008-May-13 20:01:19 INFO4 executive: This is an ON-LINE session 2008-May-13 20:01:19 INFO4 executive: This is a REMOTE session 2008-May-13 20:01:19 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2008-May-13 20:01:19 INFO1 executive: CIMA session for project 'a2048' in 'line' mode for 'RT' 2008-May-13 20:01:19 INFO2 executive: Logging to '/share/obs4/usr/a2048/a2048.cimalog_20080513' 2008-May-13 20:01:20 LOG2 log_preferences: Currently applied preferences: 2008-May-13 20:01:20 LOG2 log_preferences: prefs(dailylog) = daily 2008-May-13 20:01:20 LOG2 log_preferences: prefs(offlinelog) = skip 2008-May-13 20:01:20 LOG2 log_preferences: prefs(datawindow) = ignore 2008-May-13 20:01:20 LOG2 log_preferences: prefs(limitwarning) = enabled 2008-May-13 20:01:20 LOG2 log_preferences: prefs(wappfailure) = abort 2008-May-13 20:01:20 LOG2 log_preferences: prefs(helpstyle) = stay-open 2008-May-13 20:01:20 LOG2 log_preferences: prefs(logcolours) = full 2008-May-13 20:01:20 LOG2 log_preferences: prefs(displaylevel) = INFO3 2008-May-13 20:01:20 LOG2 log_preferences: prefs(loglevel) = LOG5 2008-May-13 20:01:20 LOG2 log_preferences: prefs(displayformat) = short 2008-May-13 20:01:20 LOG2 log_preferences: prefs(logformat) = new 2008-May-13 20:01:20 LOG2 log_preferences: prefs(fontsize) = 4 2008-May-13 20:01:20 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2008-May-13 20:01:20 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2048 2008-May-13 20:01:20 ALERT executive: CIMA executive ready 2008-May-13 20:01:22 NOTE frontend: CIMA frontend ready 2008-May-13 20:01:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-13 20:01:23 LOG4 got_cormsg: From DATATAKING: setup 2008-May-13 20:01:29 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0xd 2008-May-13 20:01:29 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0xd' 2008-May-13 20:01:29 LOG4 got_cormsg: From DATATAKING: vw% io 2008-May-13 20:01:29 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2008-May-13 20:01:29 LOG4 got_cormsg: From DATATAKING: 2008-May-13 20:01:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-13 20:01:30 LOG4 got_cormsg: From DATATAKING: tape stat 2008-May-13 20:01:30 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2008-May-13 20:01:30 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2008-May-13 20:01:30 LOG4 got_cormsg: From DATATAKING: vw% connectall 2008-May-13 20:01:30 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2008-May-13 20:01:30 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2008-May-13 20:01:30 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2008-May-13 20:01:30 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2008-May-13 20:01:30 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2008-May-13 20:01:30 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2008-May-13 20:01:30 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2008-May-13 20:01:30 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2008-May-13 20:01:30 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2048 2008-May-13 20:01:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-13 20:01:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-13 20:01:34 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2008-May-13 20:01:34 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2008-May-13 20:01:34 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2008-May-13 20:01:34 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2008-May-13 20:01:34 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-May-13 20:01:34 NOTE select_receiver: Starting to select receiver ALFA 2008-May-13 20:01:34 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-May-13 20:01:34 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-May-13 20:01:34 LOG3 vw_send: To DATATAKING: acvlbical off 2008-May-13 20:01:34 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-May-13 20:01:34 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-May-13 20:01:34 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-May-13 20:01:34 DONE finish_task: DONE finished selecting: receiver ALFA 2008-May-13 20:01:34 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-May-13 20:01:34 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-May-13 20:01:34 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-May-13 20:01:34 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-May-13 20:01:34 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-May-13 20:01:41 LOG4 got_cormsg: From DATATAKING: waiting for turret position:26.64 2008-May-13 20:01:58 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2008-May-13 20:01:58 LOG4 exec_msg: From OBSERVER: restart_wapp 2008-May-13 20:01:58 LOG5 restart_wapp: Calling 'restart_wapp' 2008-May-13 20:01:58 BEGIN begin_task: Starting task 'restarting the WAPPs' 2008-May-13 20:01:58 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-May-13 20:01:58 NOTE restart_wapp: Restarting all WAPPs 2008-May-13 20:01:58 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2008-May-13 20:01:59 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2008-May-13 20:01:59 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-May-13 20:01:59 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-May-13 20:02:02 ALERT WAPP=2-wappcon: WAPP2 restarting 2008-May-13 20:02:02 ALERT WAPP=4-wappcon: WAPP4 restarting 2008-May-13 20:02:02 ALERT WAPP=3-wappcon: WAPP3 restarting 2008-May-13 20:02:02 ALERT WAPP=1-wappcon: WAPP1 restarting 2008-May-13 20:03:35 INFO1 CIMA-run_command_file: Transferring command file 'command_galfasrc.cmd ' to executive ... 2008-May-13 20:03:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 5 {LOAD togs_ages.conf} 2008-May-13 20:03:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 6 {CATALOG togs_ages.cat} 2008-May-13 20:03:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {IF lst < 10 then GOTO galfasrc} 2008-May-13 20:03:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {IF lst >= 10 then GOTO galfasrc2} 2008-May-13 20:03:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {ALFAANGLE 19} 2008-May-13 20:03:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 10 {WAITTRACK} 2008-May-13 20:03:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 14 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2008-May-13 20:03:35 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-May-13 20:03:35 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc.cmd 1 1 7 2008-May-13 20:03:35 LOG4 run_command_file: Calling 'run_command_file command_galfasrc.cmd 1 1 7' 2008-May-13 20:03:35 BEGIN begin_task: Starting task 'running command file 'command_galfasrc.cmd'' 2008-May-13 20:03:35 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-May-13 20:03:35 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc.cmd' ...} 2008-May-13 20:03:35 NOTE run_command_file: Starting execution of command file 'command_galfasrc.cmd' from line 1 2008-May-13 20:03:35 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_ages.conf' 2008-May-13 20:03:35 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2008-May-13 20:03:35 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-May-13 20:03:35 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2008-May-13 20:03:35 NOTE CIMA-load_config_file: Loading configuration file 'togs_ages.conf' 2008-May-13 20:03:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-May-13 20:03:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-May-13 20:03:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-May-13 20:03:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-May-13 20:03:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-May-13 20:03:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2008-May-13 20:03:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-May-13 20:03:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1381.2" 2008-May-13 20:03:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1381.2" 2008-May-13 20:03:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1381.2" 2008-May-13 20:03:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1381.2" 2008-May-13 20:03:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1381.2" 2008-May-13 20:03:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1381.2" 2008-May-13 20:03:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1381.2" 2008-May-13 20:03:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1381.2" 2008-May-13 20:03:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1381.2" 2008-May-13 20:03:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-May-13 20:03:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-May-13 20:03:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-May-13 20:03:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-May-13 20:03:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-May-13 20:03:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-May-13 20:03:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-May-13 20:03:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-May-13 20:03:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-May-13 20:03:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-May-13 20:03:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-May-13 20:03:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-May-13 20:03:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-May-13 20:03:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2008-May-13 20:03:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-May-13 20:03:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-May-13 20:03:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-May-13 20:03:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-May-13 20:03:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-May-13 20:03:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-May-13 20:03:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-May-13 20:03:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-May-13 20:03:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-May-13 20:03:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1631.200000" 2008-May-13 20:03:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-May-13 20:03:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-May-13 20:03:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-May-13 20:03:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-May-13 20:03:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-May-13 20:03:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-May-13 20:03:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-May-13 20:03:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-May-13 20:03:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-May-13 20:03:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-May-13 20:03:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-May-13 20:03:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-May-13 20:03:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-May-13 20:03:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-May-13 20:03:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-May-13 20:03:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-May-13 20:03:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-May-13 20:03:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-May-13 20:03:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-May-13 20:03:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-May-13 20:03:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-May-13 20:03:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-May-13 20:03:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-May-13 20:03:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-May-13 20:03:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-May-13 20:03:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-May-13 20:03:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-May-13 20:03:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-May-13 20:03:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-May-13 20:03:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-May-13 20:03:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-May-13 20:03:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-May-13 20:03:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-May-13 20:03:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-May-13 20:03:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-May-13 20:03:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-May-13 20:03:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-May-13 20:03:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-May-13 20:03:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-May-13 20:03:37 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-May-13 20:03:37 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-May-13 20:03:37 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-May-13 20:03:37 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-May-13 20:03:37 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-May-13 20:03:37 INFO1 config_iflo: Selecting receiver ALFA 2008-May-13 20:03:37 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2008-May-13 20:03:37 LOG1 select_receiver: Calling 'select_receiver alfa no no no' 2008-May-13 20:03:37 START begin_task: Starting task 'selecting receiver ALFA' 2008-May-13 20:03:37 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-May-13 20:03:37 NOTE select_receiver: Starting to select receiver ALFA 2008-May-13 20:03:37 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-May-13 20:03:37 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-May-13 20:03:37 LOG3 vw_send: To DATATAKING: acvlbical off 2008-May-13 20:03:37 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-May-13 20:03:38 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-May-13 20:03:38 LOG5 finish_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-May-13 20:03:38 INFO2 finish_task: DONE finished selecting: receiver ALFA 2008-May-13 20:03:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-May-13 20:03:38 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-May-13 20:03:38 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-May-13 20:03:38 START begin_task: Starting task 'waiting for receiver ALFA' 2008-May-13 20:03:38 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2008-May-13 20:03:38 LOG4 send_obs_status: To obs_status: <0> TASKTIME 25 BITMAP stat_alfa_rot INFO {Waiting on rotating floor} 2008-May-13 20:03:38 START begin_task: Starting task 'waiting on waiting for receiver rotation' 2008-May-13 20:03:38 LOG5 begin_task: Level: (4) ID = <10007> Status = 0 0 0 0 ok 2008-May-13 20:03:38 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-May-13 20:03:38 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-May-13 20:03:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-13 20:03:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-13 20:03:57 STOP end_task: Finishing task 'waiting on waiting for receiver rotation' with status 'OK' 2008-May-13 20:03:57 LOG5 end_task: Level: (4) ID = <10007> Status = 0 0 0 0 ok 2008-May-13 20:03:57 LOG4 send_obs_status: To obs_status: <0> TASKWAIT 2008-May-13 20:03:57 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2008-May-13 20:03:57 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2008-May-13 20:03:57 INFO1 config_iflo: Configuring rest of the IF/LO path 2008-May-13 20:03:57 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2008-May-13 20:03:57 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-May-13 20:03:57 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-May-13 20:03:57 START begin_task: Starting task 'waiting on command to ALFA' 2008-May-13 20:03:57 LOG5 begin_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2008-May-13 20:03:57 LOG4 got_alfamon: From ALFAMON: ACK 2008-May-13 20:03:57 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-May-13 20:03:57 LOG5 end_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2008-May-13 20:03:57 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-May-13 20:03:57 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-May-13 20:03:57 LOG3 vw_send: To DATATAKING: alfafb 1 2008-May-13 20:03:57 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2008-May-13 20:03:57 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-May-13 20:03:57 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-May-13 20:03:57 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2008-May-13 20:03:57 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2008-May-13 20:03:57 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2008-May-13 20:03:57 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2008-May-13 20:03:57 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2008-May-13 20:03:57 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2008-May-13 20:03:57 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-May-13 20:03:57 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-May-13 20:03:57 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-May-13 20:03:57 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-May-13 20:03:57 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-May-13 20:03:57 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2008-May-13 20:03:57 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2008-May-13 20:03:57 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2008-May-13 20:03:57 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2008-May-13 20:03:57 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-May-13 20:03:57 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2008-May-13 20:03:57 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-May-13 20:03:57 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-May-13 20:03:57 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-13 20:03:57 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-May-13 20:03:57 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2008-May-13 20:03:57 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-May-13 20:03:57 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2008-May-13 20:03:57 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2008-May-13 20:03:57 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-May-13 20:03:57 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-May-13 20:03:57 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-May-13 20:03:57 LOG5 begin_task: Level: (3) ID = <10009> Status = 0 0 0 0 ok 2008-May-13 20:03:57 LOG4 got_cormsg: From DATATAKING: alfafb 1 2008-May-13 20:03:57 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2008-May-13 20:03:57 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2008-May-13 20:03:57 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2008-May-13 20:03:57 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2008-May-13 20:03:57 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2008-May-13 20:03:57 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2008-May-13 20:03:57 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2008-May-13 20:03:57 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2008-May-13 20:03:57 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2008-May-13 20:03:57 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2008-May-13 20:03:57 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2008-May-13 20:03:57 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-May-13 20:03:57 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2008-May-13 20:03:57 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-May-13 20:03:57 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-13 20:03:57 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-May-13 20:03:57 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2008-May-13 20:03:57 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2008-May-13 20:03:57 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2008-May-13 20:03:57 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-May-13 20:04:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-13 20:04:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-13 20:04:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-13 20:04:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-13 20:04:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-13 20:04:04 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-13 20:04:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-13 20:04:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-13 20:04:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-13 20:04:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-13 20:04:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-13 20:04:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-13 20:04:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-13 20:04:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-13 20:04:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-13 20:04:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-13 20:04:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-13 20:04:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-13 20:04:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-13 20:04:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-13 20:04:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-13 20:04:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-13 20:04:11 LOG4 got_cormsg: From DATATAKING: DONE 2008-May-13 20:04:11 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-May-13 20:04:11 LOG5 end_task: Level: (3) ID = <10009> Status = 0 0 0 0 ok 2008-May-13 20:04:11 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-May-13 20:04:11 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-May-13 20:04:11 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-May-13 20:04:11 DONE finish_task: DONE finished configuration: IF/LO path 2008-May-13 20:04:11 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-May-13 20:04:11 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-May-13 20:04:11 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-May-13 20:04:12 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-May-13 20:04:12 LOG5 begin_task: Level: (2) ID = <10010> Status = 0 0 0 0 ok 2008-May-13 20:04:12 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-May-13 20:04:12 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-May-13 20:04:12 START begin_task: Starting task 'selecting calibration port' 2008-May-13 20:04:12 LOG5 begin_task: Level: (3) ID = <10011> Status = 0 0 0 0 ok 2008-May-13 20:04:12 LOG3 vw_send: To DATATAKING: calport 3 2008-May-13 20:04:12 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-May-13 20:04:12 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-May-13 20:04:12 START begin_task: Starting task 'waiting on calport' 2008-May-13 20:04:12 LOG5 begin_task: Level: (4) ID = <10012> Status = 0 0 0 0 ok 2008-May-13 20:04:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-13 20:04:12 LOG4 got_cormsg: From DATATAKING: calport 3 2008-May-13 20:04:12 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-May-13 20:04:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-13 20:04:12 LOG4 got_cormsg: From DATATAKING: DONE 2008-May-13 20:04:12 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-May-13 20:04:12 LOG5 end_task: Level: (4) ID = <10012> Status = 0 0 0 0 ok 2008-May-13 20:04:12 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-May-13 20:04:12 STOP finish_task: Finishing task 'selecting calibration port' 2008-May-13 20:04:12 LOG5 finish_task: Level: (3) ID = <10011> Status = 0 0 0 0 ok 2008-May-13 20:04:12 INFO2 finish_task: DONE finished configuring: calibration port 2008-May-13 20:04:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-May-13 20:04:12 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-May-13 20:04:12 LOG5 end_task: Level: (3) ID = <10011> Status = 0 0 0 0 ok 2008-May-13 20:04:12 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-May-13 20:04:12 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-May-13 20:04:12 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-May-13 20:04:12 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-May-13 20:04:12 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-May-13 20:04:12 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-May-13 20:04:12 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-May-13 20:04:12 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-May-13 20:04:12 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 RT 2008-May-13 20:04:12 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 RT 2008-May-13 20:04:12 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 RT 2008-May-13 20:04:12 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 RT 2008-May-13 20:04:12 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-May-13 20:04:12 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-May-13 20:04:12 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-May-13 20:04:12 LOG5 begin_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2008-May-13 20:04:12 LOG3 CALCONTROL-caltrig: Software trigger 2008-May-13 20:04:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-13 20:04:12 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-May-13 20:04:12 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-May-13 20:04:12 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-May-13 20:04:12 LOG5 end_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2008-May-13 20:04:12 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 RT 2008-May-13 20:04:12 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 RT 2008-May-13 20:04:12 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 RT 2008-May-13 20:04:12 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 RT 2008-May-13 20:04:13 STOP finish_task: Finishing task 'configuring WAPPs' 2008-May-13 20:04:13 LOG5 finish_task: Level: (2) ID = <10010> Status = 0 0 0 0 ok 2008-May-13 20:04:13 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-May-13 20:04:13 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-May-13 20:04:13 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-May-13 20:04:13 LOG5 end_task: Level: (2) ID = <10010> Status = 0 0 0 0 ok 2008-May-13 20:04:13 COMMAND run_command_line: EXECUTING command 6: 'CATALOG togs_ages.cat' 2008-May-13 20:04:13 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/togs_ages.cat' 2008-May-13 20:04:13 COMMAND run_command_line: EXECUTING command 7: 'IF lst < 10 then GOTO galfasrc' 2008-May-13 20:04:13 INFO5 is_if_valid: Evaluating condition: LST < 10 2008-May-13 20:04:13 INFO5 is_if_valid: Condition parsed as: 11.093629 < 10 2008-May-13 20:04:13 INFO1 is_if_valid: Skipping line 'IF lst < 10 then GOTO galfasrc' 2008-May-13 20:04:13 COMMAND run_command_line: EXECUTING command 8: 'IF lst >= 10 then GOTO galfasrc2' 2008-May-13 20:04:13 INFO5 is_if_valid: Evaluating condition: LST >= 10 2008-May-13 20:04:13 INFO5 is_if_valid: Condition parsed as: 11.093629 >= 10 2008-May-13 20:04:13 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2048/togs_ages.cat galfasrc2 nooffset nowait' 2008-May-13 20:04:13 BEGIN begin_task: Starting task 'tracking source 'galfasrc2'' 2008-May-13 20:04:13 LOG5 begin_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2008-May-13 20:04:13 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc2' ...} 2008-May-13 20:04:13 LOG3 track_source: Calling 'track_source galfasrc2 115900.0 +073000 J 0.0 0.0 main small /share/obs4/usr/a2048/togs_ages.cat 0 Topocentric velocity(optical)' 2008-May-13 20:04:13 START begin_task: Starting task 'sending tracking commands' 2008-May-13 20:04:13 LOG5 begin_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2008-May-13 20:04:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc2} INFO {Slewing to source 'galfasrc2' ...} 2008-May-13 20:04:13 INFO1 track_source: Starting to track galfasrc2 2008-May-13 20:04:13 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc2" 2008-May-13 20:04:13 LOG3 vw_send: To DATATAKING: set ra 115900.0 2008-May-13 20:04:13 LOG3 vw_send: To DATATAKING: set dec +073000 2008-May-13 20:04:13 LOG3 vw_send: To DATATAKING: pnt tr send 2008-May-13 20:04:13 LOG3 vw_send: To DATATAKING: pnt tr 115900.0 +073000 -CJ 2008-May-13 20:04:13 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-May-13 20:04:13 STOP finish_task: Finishing task 'sending tracking commands' 2008-May-13 20:04:13 LOG5 finish_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2008-May-13 20:04:13 INFO2 finish_task: DONE finished sending: tracking commands 2008-May-13 20:04:13 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-May-13 20:04:13 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-May-13 20:04:13 LOG5 end_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2008-May-13 20:04:13 STOP finish_task: Finishing task 'tracking source 'galfasrc2'' 2008-May-13 20:04:13 LOG5 finish_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2008-May-13 20:04:13 DONE finish_task: DONE finished tracking: source 'galfasrc2' 2008-May-13 20:04:13 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-May-13 20:04:13 END end_task: Finishing task 'tracking source 'galfasrc2'' with status 'OK' 2008-May-13 20:04:13 LOG5 end_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2008-May-13 20:04:13 COMMAND run_command_line: EXECUTING command 9: 'ALFAANGLE 19' 2008-May-13 20:04:13 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2008-May-13 20:04:13 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-May-13 20:04:13 LOG5 begin_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2008-May-13 20:04:13 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-May-13 20:04:13 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-May-13 20:04:13 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-May-13 20:04:13 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-May-13 20:04:13 START begin_task: Starting task 'waiting on ALFA rotation' 2008-May-13 20:04:13 LOG5 begin_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2008-May-13 20:04:14 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 RT' 2008-May-13 20:04:14 NOTE WAPPDATA-new_file: New FITS file: wapp.20080513.a2048.0000.fits 2008-May-13 20:04:14 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc2" 2008-May-13 20:04:14 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-May-13 20:04:14 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-May-13 20:04:14 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20080513.a2048.0000.fits} 2008-May-13 20:04:14 LOG4 got_cormsg: From DATATAKING: set ra 115900.0 2008-May-13 20:04:14 LOG4 got_cormsg: From DATATAKING: set dec +073000 2008-May-13 20:04:14 LOG4 got_cormsg: From DATATAKING: vw% 115900.0 2008-May-13 20:04:14 LOG4 got_cormsg: From DATATAKING: vw% +073000 2008-May-13 20:04:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-13 20:04:14 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-May-13 20:04:14 LOG4 got_cormsg: From DATATAKING: pnt tr 115900.0 +073000 -CJ 2008-May-13 20:04:14 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-May-13 20:04:14 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-May-13 20:04:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-13 20:04:14 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 RT' 2008-May-13 20:04:21 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-May-13 20:04:21 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-May-13 20:04:21 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-May-13 20:04:21 LOG5 end_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2008-May-13 20:04:21 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-May-13 20:04:21 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-May-13 20:04:21 LOG5 finish_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2008-May-13 20:04:21 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-May-13 20:04:21 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-May-13 20:04:21 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-May-13 20:04:21 LOG5 end_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2008-May-13 20:04:21 COMMAND run_command_line: EXECUTING command 10: 'WAITTRACK' 2008-May-13 20:04:21 BEGIN begin_task: Starting task 'waiting on telescope' 2008-May-13 20:04:21 LOG5 begin_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2008-May-13 20:04:21 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-May-13 20:04:21 LOG3 waittrk: Start waittrk 5 2008-May-13 20:04:21 START begin_task: Starting task 'waiting on telescope movement' 2008-May-13 20:04:21 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2008-May-13 20:04:26 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-May-13 20:04:26 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2008-May-13 20:04:26 START begin_task: Starting task 'waiting on telescope on source' 2008-May-13 20:04:26 LOG5 begin_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2008-May-13 20:07:46 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-May-13 20:07:46 LOG5 end_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2008-May-13 20:07:46 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-May-13 20:07:46 INFO2 waittrk: Now tracking galfasrc2 2008-May-13 20:07:46 LOG4 waittrk: Current telescope position: Az = 309.74 ZA = 16.37 2008-May-13 20:07:46 STOP finish_task: Finishing task 'waiting on telescope' 2008-May-13 20:07:46 LOG5 finish_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2008-May-13 20:07:46 DONE finish_task: DONE finished waiting: telescope on source 2008-May-13 20:07:46 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-May-13 20:07:46 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-May-13 20:07:47 LOG5 end_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2008-May-13 20:07:47 COMMAND run_command_line: EXECUTING command 14: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2008-May-13 20:07:47 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2008-May-13 20:07:50 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-May-13 20:07:50 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first 0 {1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2008-May-13 20:07:50 BEGIN begin_task: Starting task 'smart frequency switching' 2008-May-13 20:07:50 LOG5 begin_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2008-May-13 20:07:50 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'galfasrc2' 2008-May-13 20:07:50 INFO1 smartfreq: Starting pattern: Smart frequency switching 2008-May-13 20:07:50 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2008-May-13 20:07:50 START begin_task: Starting task 'selecting calibration type' 2008-May-13 20:07:50 LOG5 begin_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2008-May-13 20:07:50 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-May-13 20:07:50 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-May-13 20:07:50 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-May-13 20:07:50 START begin_task: Starting task 'waiting on setcal' 2008-May-13 20:07:50 LOG5 begin_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2008-May-13 20:07:50 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-May-13 20:07:50 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-May-13 20:07:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-13 20:07:50 LOG4 got_cormsg: From DATATAKING: DONE 2008-May-13 20:07:50 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-May-13 20:07:50 LOG5 end_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2008-May-13 20:07:50 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-May-13 20:07:50 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-May-13 20:07:50 LOG3 socket_wait: To ALFAMON: CAL HI 2008-May-13 20:07:50 START begin_task: Starting task 'waiting on command to ALFA' 2008-May-13 20:07:50 LOG5 begin_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2008-May-13 20:07:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-13 20:07:50 LOG4 got_alfamon: From ALFAMON: ACK 2008-May-13 20:07:50 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-May-13 20:07:50 LOG5 end_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2008-May-13 20:07:50 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-May-13 20:07:50 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-May-13 20:07:50 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-May-13 20:07:50 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-May-13 20:07:50 START begin_task: Starting task 'waiting on command to ALFA' 2008-May-13 20:07:50 LOG5 begin_task: Level: (4) ID = <10025> Status = 0 0 0 0 ok 2008-May-13 20:07:50 LOG4 got_alfamon: From ALFAMON: ACK 2008-May-13 20:07:50 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-May-13 20:07:50 LOG5 end_task: Level: (4) ID = <10025> Status = 0 0 0 0 ok 2008-May-13 20:07:50 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-May-13 20:07:50 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-May-13 20:07:50 STOP finish_task: Finishing task 'selecting calibration type' 2008-May-13 20:07:50 LOG5 finish_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2008-May-13 20:07:50 INFO2 finish_task: DONE finished configuring: calibration type 2008-May-13 20:07:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-May-13 20:07:50 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-May-13 20:07:50 LOG5 end_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2008-May-13 20:07:50 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 RT 2008-May-13 20:07:50 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 RT 2008-May-13 20:07:50 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 RT 2008-May-13 20:07:50 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 RT 2008-May-13 20:07:50 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20080513.a2048.0000.fits' is empty! 2008-May-13 20:07:50 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2008-May-13 20:07:50 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-May-13 20:07:50 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2008-May-13 20:07:50 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-May-13 20:07:50 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-May-13 20:07:50 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-May-13 20:07:50 LOG5 begin_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-May-13 20:07:50 LOG3 CALCONTROL-caltrig: Software trigger 2008-May-13 20:07:50 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-May-13 20:07:50 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-May-13 20:07:50 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-May-13 20:07:50 LOG5 end_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-May-13 20:07:51 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2008-May-13 20:07:51 START begin_task: Starting task 'adjusting WAPP power' 2008-May-13 20:07:51 LOG5 begin_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2008-May-13 20:07:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-May-13 20:07:51 INFO2 adjust_power: Starting to adjust WAPP power 2008-May-13 20:07:51 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-May-13 20:07:51 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-May-13 20:07:51 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-May-13 20:07:51 START begin_task: Starting task 'waiting on adjpwrif2' 2008-May-13 20:07:51 LOG5 begin_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2008-May-13 20:07:51 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-May-13 20:07:51 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-May-13 20:07:51 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 RT' 2008-May-13 20:07:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-13 20:07:53 LOG4 got_cormsg: From DATATAKING: DONE 2008-May-13 20:07:53 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-May-13 20:07:53 LOG5 end_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2008-May-13 20:07:53 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-May-13 20:07:53 START begin_task: Starting task 'adjusting WAPP power' 2008-May-13 20:07:53 LOG5 begin_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2008-May-13 20:07:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-May-13 20:07:53 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-May-13 20:07:53 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-May-13 20:07:54 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-May-13 20:07:54 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-May-13 20:07:54 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-May-13 20:07:54 LOG5 begin_task: Level: (5) ID = <10030> Status = 0 0 0 0 ok 2008-May-13 20:07:54 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-May-13 20:07:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-13 20:07:54 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 9 dB --- beam 1: 7 6 dB 2008-May-13 20:07:54 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-May-13 20:07:54 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 5 dB 2008-May-13 20:07:54 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 2 2 dB 2008-May-13 20:07:54 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-May-13 20:07:54 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-May-13 20:07:54 LOG5 end_task: Level: (5) ID = <10030> Status = 0 0 0 0 ok 2008-May-13 20:07:54 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.103 0.985 ALFA beam 1: 1.091 1.041 2008-May-13 20:07:54 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.068 1.010 ALFA beam 3: 0.972 1.054 2008-May-13 20:07:54 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.926 0.965 ALFA beam 5: 1.009 0.963 2008-May-13 20:07:54 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.918 0.963 ALFA beam 7: 1.008 1.070 2008-May-13 20:07:54 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-May-13 20:07:54 LOG5 finish_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2008-May-13 20:07:54 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-May-13 20:07:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-May-13 20:07:54 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-May-13 20:07:54 LOG5 end_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2008-May-13 20:07:54 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-May-13 20:07:54 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-May-13 20:07:54 LOG5 finish_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2008-May-13 20:07:54 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-May-13 20:07:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-May-13 20:07:54 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-May-13 20:07:54 LOG5 end_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2008-May-13 20:07:54 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2008-May-13 20:07:54 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2008-May-13 20:07:54 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2008-May-13 20:07:54 LOG5 antvel: Calling 'antvel 115900.000000 73000.000000 J 0' 2008-May-13 20:07:54 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +07:30:00.0 Epoch = 2008.36917 J 2008-May-13 20:07:54 LOG2 antvel: Computed apparent RA = 11:59:27.1 Dec = +07:27:06.1 2008-May-13 20:07:54 LOG2 antvel: Parameters to Doppler: Topocentric 86874 2008 134 0.0 2008-May-13 20:07:54 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-May-13 20:07:54 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2008-May-13 20:07:54 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2008-May-13 20:07:54 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-May-13 20:07:54 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-May-13 20:07:54 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2008-May-13 20:07:54 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-13 20:07:54 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-May-13 20:07:54 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-May-13 20:07:54 LOG5 begin_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2008-May-13 20:07:54 INFO3 take_spectra: Starting take_spectra 10 1 2008-May-13 20:07:54 LOG5 log_alfabeam: Parameters: 11.983333333333333 7.5 11.155465 2008.3691685679519 18.999933 2008-May-13 20:07:54 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333331 7.500000000000003 2008-May-13 20:07:54 LOG4 log_alfabeam: ALFABEAM 1 11.977388801443318 7.558751190652490 2008-May-13 20:07:54 LOG4 log_alfabeam: ALFABEAM 2 11.977659360946360 7.460768832217062 2008-May-13 20:07:54 LOG4 log_alfabeam: ALFABEAM 3 11.983589604875231 7.401707393360371 2008-May-13 20:07:54 LOG4 log_alfabeam: ALFABEAM 4 11.989285338684162 7.441402059300676 2008-May-13 20:07:54 LOG4 log_alfabeam: ALFABEAM 5 11.989002867478170 7.539779074481808 2008-May-13 20:07:54 LOG4 log_alfabeam: ALFABEAM 6 11.983036669054837 7.598065688427352 2008-May-13 20:07:54 INFO2 take_spectra: Starting WAPP+GALFA scan: 813400156 2008-May-13 20:07:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-May-13 20:07:55 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-May-13 20:07:55 LOG5 begin_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2008-May-13 20:07:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-13 20:07:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2008-May-13 20:07:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-13 20:07:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-13 20:07:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-13 20:07:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 476.00 2008-May-13 20:07:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-13 20:07:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 2048.000000 MHz 2008-May-13 20:07:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1878.000000 MHz 2008-May-13 20:07:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1708.000000 MHz 2008-May-13 20:07:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1538.000000 MHz 2008-May-13 20:07:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1963.000000 MHz 2008-May-13 20:07:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1793.000000 MHz 2008-May-13 20:07:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1623.000000 MHz 2008-May-13 20:07:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 953.000000 MHz 2008-May-13 20:08:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-13 20:08:06 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-May-13 20:08:06 LOG5 end_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2008-May-13 20:08:06 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-May-13 20:08:06 LOG5 end_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2008-May-13 20:08:06 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2008-May-13 20:08:06 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2008-May-13 20:08:06 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2008-May-13 20:08:06 LOG5 antvel: Calling 'antvel 115900.000000 73000.000000 J 0' 2008-May-13 20:08:06 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +07:30:00.0 Epoch = 2008.36917 J 2008-May-13 20:08:06 LOG2 antvel: Computed apparent RA = 11:59:27.1 Dec = +07:27:06.1 2008-May-13 20:08:06 LOG2 antvel: Parameters to Doppler: Topocentric 86886 2008 134 0.0 2008-May-13 20:08:06 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-May-13 20:08:06 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2008-May-13 20:08:06 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2008-May-13 20:08:06 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-May-13 20:08:06 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-May-13 20:08:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2008-May-13 20:08:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-13 20:08:06 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-May-13 20:08:06 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-May-13 20:08:06 LOG5 begin_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2008-May-13 20:08:06 INFO3 take_spectra: Starting take_spectra 10 1 2008-May-13 20:08:06 LOG5 log_alfabeam: Parameters: 11.983333333333333 7.5 11.158807 2008.3691689482089 18.999933 2008-May-13 20:08:06 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333327 7.499999999999995 2008-May-13 20:08:06 LOG4 log_alfabeam: ALFABEAM 1 11.977396361221977 7.558919978167345 2008-May-13 20:08:06 LOG4 log_alfabeam: ALFABEAM 2 11.977654330756904 7.460930582710493 2008-May-13 20:08:06 LOG4 log_alfabeam: ALFABEAM 3 11.983576947829635 7.401700036984529 2008-May-13 20:08:06 LOG4 log_alfabeam: ALFABEAM 4 11.989277819682940 7.441233461448687 2008-May-13 20:08:06 LOG4 log_alfabeam: ALFABEAM 5 11.989007954107812 7.539618776079124 2008-May-13 20:08:06 LOG4 log_alfabeam: ALFABEAM 6 11.983049207984831 7.598073660614557 2008-May-13 20:08:06 INFO2 take_spectra: Starting WAPP+GALFA scan: 813400157 2008-May-13 20:08:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-May-13 20:08:07 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-May-13 20:08:07 LOG5 begin_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2008-May-13 20:08:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-13 20:08:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2008-May-13 20:08:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-13 20:08:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-13 20:08:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-13 20:08:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 488.00 2008-May-13 20:08:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-13 20:08:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 2048.000000 MHz 2008-May-13 20:08:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1878.000000 MHz 2008-May-13 20:08:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1708.000000 MHz 2008-May-13 20:08:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1538.000000 MHz 2008-May-13 20:08:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1963.000000 MHz 2008-May-13 20:08:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1793.000000 MHz 2008-May-13 20:08:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1623.000000 MHz 2008-May-13 20:08:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 953.000000 MHz 2008-May-13 20:08:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-13 20:08:18 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-May-13 20:08:18 LOG5 end_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2008-May-13 20:08:18 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-May-13 20:08:18 LOG5 end_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2008-May-13 20:08:18 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2008-May-13 20:08:18 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2008-May-13 20:08:18 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2008-May-13 20:08:18 LOG5 antvel: Calling 'antvel 115900.000000 73000.000000 J 0' 2008-May-13 20:08:18 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +07:30:00.0 Epoch = 2008.36917 J 2008-May-13 20:08:18 LOG2 antvel: Computed apparent RA = 11:59:27.1 Dec = +07:27:06.1 2008-May-13 20:08:18 LOG2 antvel: Parameters to Doppler: Topocentric 86898 2008 134 0.0 2008-May-13 20:08:18 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-May-13 20:08:18 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2008-May-13 20:08:18 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2008-May-13 20:08:18 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-May-13 20:08:18 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-May-13 20:08:18 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2008-May-13 20:08:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-13 20:08:18 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-May-13 20:08:18 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-May-13 20:08:18 LOG5 begin_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2008-May-13 20:08:18 INFO3 take_spectra: Starting take_spectra 10 1 2008-May-13 20:08:18 LOG5 log_alfabeam: Parameters: 11.983333333333333 7.5 11.162150 2008.3691693284661 18.999933 2008-May-13 20:08:18 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333331 7.500000000000006 2008-May-13 20:08:18 LOG4 log_alfabeam: ALFABEAM 1 11.977403980343141 7.559089386344691 2008-May-13 20:08:18 LOG4 log_alfabeam: ALFABEAM 2 11.977649296610078 7.461093278388466 2008-May-13 20:08:18 LOG4 log_alfabeam: ALFABEAM 3 11.983564227096062 7.401693007885047 2008-May-13 20:08:18 LOG4 log_alfabeam: ALFABEAM 4 11.989270241590107 7.441064241244076 2008-May-13 20:08:18 LOG4 log_alfabeam: ALFABEAM 5 11.989013045349465 7.539457535623777 2008-May-13 20:08:18 LOG4 log_alfabeam: ALFABEAM 6 11.983061810230648 7.598081315789807 2008-May-13 20:08:18 INFO2 take_spectra: Starting WAPP+GALFA scan: 813400158 2008-May-13 20:08:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-May-13 20:08:19 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-May-13 20:08:19 LOG5 begin_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2008-May-13 20:08:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-13 20:08:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2008-May-13 20:08:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-13 20:08:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-13 20:08:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-13 20:08:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 500.00 2008-May-13 20:08:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-13 20:08:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 2048.000000 MHz 2008-May-13 20:08:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1878.000000 MHz 2008-May-13 20:08:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1708.000000 MHz 2008-May-13 20:08:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1538.000000 MHz 2008-May-13 20:08:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1963.000000 MHz 2008-May-13 20:08:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1793.000000 MHz 2008-May-13 20:08:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1623.000000 MHz 2008-May-13 20:08:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 953.000000 MHz 2008-May-13 20:08:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-13 20:08:30 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-May-13 20:08:30 LOG5 end_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2008-May-13 20:08:30 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-May-13 20:08:30 LOG5 end_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2008-May-13 20:08:30 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2008-May-13 20:08:30 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2008-May-13 20:08:30 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2008-May-13 20:08:30 LOG5 antvel: Calling 'antvel 115900.000000 73000.000000 J 0' 2008-May-13 20:08:30 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +07:30:00.0 Epoch = 2008.36917 J 2008-May-13 20:08:30 LOG2 antvel: Computed apparent RA = 11:59:27.1 Dec = +07:27:06.1 2008-May-13 20:08:30 LOG2 antvel: Parameters to Doppler: Topocentric 86910 2008 134 0.0 2008-May-13 20:08:30 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-May-13 20:08:30 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2008-May-13 20:08:30 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2008-May-13 20:08:30 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-May-13 20:08:30 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-May-13 20:08:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2008-May-13 20:08:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-13 20:08:30 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-May-13 20:08:30 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-May-13 20:08:30 LOG5 begin_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2008-May-13 20:08:30 INFO3 take_spectra: Starting take_spectra 10 1 2008-May-13 20:08:30 LOG5 log_alfabeam: Parameters: 11.983333333333333 7.5 11.165492 2008.3691697087231 18.999933 2008-May-13 20:08:30 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333329 7.499999999999990 2008-May-13 20:08:30 LOG4 log_alfabeam: ALFABEAM 1 11.977411654697720 7.559259314003746 2008-May-13 20:08:30 LOG4 log_alfabeam: ALFABEAM 2 11.977644261715707 7.461256826980561 2008-May-13 20:08:30 LOG4 log_alfabeam: ALFABEAM 3 11.983551450032515 7.401686315215269 2008-May-13 20:08:30 LOG4 log_alfabeam: ALFABEAM 4 11.989262608491215 7.440894499722426 2008-May-13 20:08:30 LOG4 log_alfabeam: ALFABEAM 5 11.989018137964486 7.539295444474845 2008-May-13 20:08:30 LOG4 log_alfabeam: ALFABEAM 6 11.983074468506945 7.598088644524029 2008-May-13 20:08:30 INFO2 take_spectra: Starting WAPP+GALFA scan: 813400159 2008-May-13 20:08:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-May-13 20:08:31 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-May-13 20:08:31 LOG5 begin_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2008-May-13 20:08:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-13 20:08:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2008-May-13 20:08:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-13 20:08:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-13 20:08:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-13 20:08:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 512.00 2008-May-13 20:08:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-13 20:08:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 2048.000000 MHz 2008-May-13 20:08:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1878.000000 MHz 2008-May-13 20:08:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1708.000000 MHz 2008-May-13 20:08:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1538.000000 MHz 2008-May-13 20:08:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1963.000000 MHz 2008-May-13 20:08:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1793.000000 MHz 2008-May-13 20:08:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1623.000000 MHz 2008-May-13 20:08:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 953.000000 MHz 2008-May-13 20:08:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-13 20:08:42 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-May-13 20:08:42 LOG5 end_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2008-May-13 20:08:42 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-May-13 20:08:42 LOG5 end_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2008-May-13 20:08:42 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2008-May-13 20:08:42 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2008-May-13 20:08:42 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2008-May-13 20:08:42 LOG5 antvel: Calling 'antvel 115900.000000 73000.000000 J 0' 2008-May-13 20:08:42 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +07:30:00.0 Epoch = 2008.36917 J 2008-May-13 20:08:42 LOG2 antvel: Computed apparent RA = 11:59:27.1 Dec = +07:27:06.1 2008-May-13 20:08:42 LOG2 antvel: Parameters to Doppler: Topocentric 86922 2008 134 0.0 2008-May-13 20:08:42 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-May-13 20:08:42 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2008-May-13 20:08:42 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2008-May-13 20:08:42 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-May-13 20:08:42 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-May-13 20:08:42 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2008-May-13 20:08:42 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-13 20:08:42 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-May-13 20:08:42 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-May-13 20:08:42 LOG5 begin_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2008-May-13 20:08:42 INFO3 take_spectra: Starting take_spectra 10 1 2008-May-13 20:08:42 LOG5 log_alfabeam: Parameters: 11.983333333333333 7.5 11.168834 2008.3691700889801 18.999933 2008-May-13 20:08:42 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333331 7.500000000000006 2008-May-13 20:08:42 LOG4 log_alfabeam: ALFABEAM 1 11.977419387008274 7.559429811863165 2008-May-13 20:08:42 LOG4 log_alfabeam: ALFABEAM 2 11.977639224769748 7.461421282096667 2008-May-13 20:08:42 LOG4 log_alfabeam: ALFABEAM 3 11.983538612591019 7.401679961825766 2008-May-13 20:08:42 LOG4 log_alfabeam: ALFABEAM 4 11.989254917676938 7.440724186188739 2008-May-13 20:08:42 LOG4 log_alfabeam: ALFABEAM 5 11.989023233279257 7.539132449415842 2008-May-13 20:08:42 LOG4 log_alfabeam: ALFABEAM 6 11.983087186828151 7.598095644252120 2008-May-13 20:08:42 INFO2 take_spectra: Starting WAPP+GALFA scan: 813400160 2008-May-13 20:08:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-May-13 20:08:43 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-May-13 20:08:43 LOG5 begin_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2008-May-13 20:08:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-13 20:08:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2008-May-13 20:08:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-13 20:08:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-13 20:08:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-13 20:08:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 524.00 2008-May-13 20:08:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-13 20:08:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 2048.000000 MHz 2008-May-13 20:08:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1878.000000 MHz 2008-May-13 20:08:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1708.000000 MHz 2008-May-13 20:08:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1538.000000 MHz 2008-May-13 20:08:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1963.000000 MHz 2008-May-13 20:08:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1793.000000 MHz 2008-May-13 20:08:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1623.000000 MHz 2008-May-13 20:08:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 953.000000 MHz 2008-May-13 20:08:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-13 20:08:54 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-May-13 20:08:54 LOG5 end_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2008-May-13 20:08:54 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-May-13 20:08:54 LOG5 end_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2008-May-13 20:08:54 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2008-May-13 20:08:54 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2008-May-13 20:08:54 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2008-May-13 20:08:54 LOG5 antvel: Calling 'antvel 115900.000000 73000.000000 J 0' 2008-May-13 20:08:54 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +07:30:00.0 Epoch = 2008.36917 J 2008-May-13 20:08:54 LOG2 antvel: Computed apparent RA = 11:59:27.1 Dec = +07:27:06.1 2008-May-13 20:08:54 LOG2 antvel: Parameters to Doppler: Topocentric 86934 2008 134 0.0 2008-May-13 20:08:54 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-May-13 20:08:54 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2008-May-13 20:08:54 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2008-May-13 20:08:54 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-May-13 20:08:54 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-May-13 20:08:54 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2008-May-13 20:08:54 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-13 20:08:54 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-May-13 20:08:54 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-May-13 20:08:54 LOG5 begin_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2008-May-13 20:08:54 INFO3 take_spectra: Starting take_spectra 10 1 2008-May-13 20:08:54 LOG5 log_alfabeam: Parameters: 11.983333333333333 7.5 11.172177 2008.3691704692371 18.999933 2008-May-13 20:08:54 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333329 7.500000000000003 2008-May-13 20:08:54 LOG4 log_alfabeam: ALFABEAM 1 11.977427180069650 7.559600931281008 2008-May-13 20:08:54 LOG4 log_alfabeam: ALFABEAM 2 11.977634184469201 7.461586698444248 2008-May-13 20:08:54 LOG4 log_alfabeam: ALFABEAM 3 11.983525710651936 7.401673951029172 2008-May-13 20:08:54 LOG4 log_alfabeam: ALFABEAM 4 11.989247166365924 7.440553249305752 2008-May-13 20:08:54 LOG4 log_alfabeam: ALFABEAM 5 11.989028332619936 7.538968496134489 2008-May-13 20:08:54 LOG4 log_alfabeam: ALFABEAM 6 11.983099969280028 7.598102311959568 2008-May-13 20:08:54 INFO2 take_spectra: Starting WAPP+GALFA scan: 813400161 2008-May-13 20:08:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-May-13 20:08:55 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-May-13 20:08:55 LOG5 begin_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2008-May-13 20:08:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-13 20:08:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2008-May-13 20:08:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-13 20:08:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-13 20:08:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-13 20:08:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 536.00 2008-May-13 20:08:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-13 20:08:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 2048.000000 MHz 2008-May-13 20:08:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1878.000000 MHz 2008-May-13 20:08:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1708.000000 MHz 2008-May-13 20:08:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1538.000000 MHz 2008-May-13 20:08:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1963.000000 MHz 2008-May-13 20:08:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1793.000000 MHz 2008-May-13 20:08:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1623.000000 MHz 2008-May-13 20:08:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 953.000000 MHz 2008-May-13 20:09:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-13 20:09:06 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-May-13 20:09:06 LOG5 end_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2008-May-13 20:09:06 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-May-13 20:09:06 LOG5 end_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2008-May-13 20:09:06 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2008-May-13 20:09:06 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2008-May-13 20:09:06 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2008-May-13 20:09:06 LOG5 antvel: Calling 'antvel 115900.000000 73000.000000 J 0' 2008-May-13 20:09:06 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +07:30:00.0 Epoch = 2008.36917 J 2008-May-13 20:09:06 LOG2 antvel: Computed apparent RA = 11:59:27.1 Dec = +07:27:06.1 2008-May-13 20:09:06 LOG2 antvel: Parameters to Doppler: Topocentric 86946 2008 134 0.0 2008-May-13 20:09:06 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-May-13 20:09:06 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2008-May-13 20:09:06 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2008-May-13 20:09:06 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-May-13 20:09:06 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-May-13 20:09:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2008-May-13 20:09:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-13 20:09:06 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-May-13 20:09:06 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-May-13 20:09:06 LOG5 begin_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2008-May-13 20:09:06 INFO3 take_spectra: Starting take_spectra 10 1 2008-May-13 20:09:06 LOG5 log_alfabeam: Parameters: 11.983333333333333 7.5 11.175519 2008.3691708494941 18.999933 2008-May-13 20:09:06 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333333 7.499999999999999 2008-May-13 20:09:06 LOG4 log_alfabeam: ALFABEAM 1 11.977435029677483 7.559772569924417 2008-May-13 20:09:06 LOG4 log_alfabeam: ALFABEAM 2 11.977629144038085 7.461752982163341 2008-May-13 20:09:06 LOG4 log_alfabeam: ALFABEAM 3 11.983512751683456 7.401668291538225 2008-May-13 20:09:06 LOG4 log_alfabeam: ALFABEAM 4 11.989239358738558 7.440381791263388 2008-May-13 20:09:06 LOG4 log_alfabeam: ALFABEAM 5 11.989033432732615 7.538803677571803 2008-May-13 20:09:06 LOG4 log_alfabeam: ALFABEAM 6 11.983112808467887 7.598108638641652 2008-May-13 20:09:06 INFO2 take_spectra: Starting WAPP+GALFA scan: 813400162 2008-May-13 20:09:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-May-13 20:09:07 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-May-13 20:09:07 LOG5 begin_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2008-May-13 20:09:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-13 20:09:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2008-May-13 20:09:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-13 20:09:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-13 20:09:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-13 20:09:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 548.00 2008-May-13 20:09:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-13 20:09:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 2048.000000 MHz 2008-May-13 20:09:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1878.000000 MHz 2008-May-13 20:09:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1708.000000 MHz 2008-May-13 20:09:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1538.000000 MHz 2008-May-13 20:09:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1963.000000 MHz 2008-May-13 20:09:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1793.000000 MHz 2008-May-13 20:09:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1623.000000 MHz 2008-May-13 20:09:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 953.000000 MHz 2008-May-13 20:09:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-13 20:09:18 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-May-13 20:09:18 LOG5 end_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2008-May-13 20:09:18 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-May-13 20:09:18 LOG5 end_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2008-May-13 20:09:18 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2008-May-13 20:09:18 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-May-13 20:09:18 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-May-13 20:09:18 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-May-13 20:09:18 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2008-May-13 20:09:18 LOG3 CALCONTROL-caltrig: Software trigger 2008-May-13 20:09:18 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-May-13 20:09:18 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-May-13 20:09:18 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-May-13 20:09:18 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2008-May-13 20:09:18 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2008-May-13 20:09:18 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2008-May-13 20:09:18 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2008-May-13 20:09:18 LOG5 antvel: Calling 'antvel 115900.000000 73000.000000 J 0' 2008-May-13 20:09:18 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +07:30:00.0 Epoch = 2008.36917 J 2008-May-13 20:09:18 LOG2 antvel: Computed apparent RA = 11:59:27.1 Dec = +07:27:06.1 2008-May-13 20:09:18 LOG2 antvel: Parameters to Doppler: Topocentric 86958 2008 134 0.0 2008-May-13 20:09:18 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-May-13 20:09:18 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2008-May-13 20:09:18 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2008-May-13 20:09:18 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-May-13 20:09:18 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-May-13 20:09:18 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2008-May-13 20:09:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-13 20:09:18 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-May-13 20:09:18 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-May-13 20:09:18 LOG5 begin_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2008-May-13 20:09:18 INFO3 take_spectra: Starting take_spectra 10 1 2008-May-13 20:09:18 LOG5 log_alfabeam: Parameters: 11.983333333333333 7.5 11.178862 2008.3691712297514 18.999933 2008-May-13 20:09:18 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333331 7.499999999999995 2008-May-13 20:09:18 LOG4 log_alfabeam: ALFABEAM 1 11.977442940990375 7.559944830506738 2008-May-13 20:09:18 LOG4 log_alfabeam: ALFABEAM 2 11.977624100672204 7.461920237882031 2008-May-13 20:09:18 LOG4 log_alfabeam: ALFABEAM 3 11.983499727680348 7.401662985141705 2008-May-13 20:09:18 LOG4 log_alfabeam: ALFABEAM 4 11.989231489662327 7.440209709422141 2008-May-13 20:09:18 LOG4 log_alfabeam: ALFABEAM 5 11.989038536462632 7.538637889931651 2008-May-13 20:09:18 LOG4 log_alfabeam: ALFABEAM 6 11.983125712327320 7.598114623010438 2008-May-13 20:09:18 INFO2 take_spectra: Starting WAPP+GALFA scan: 813400163 2008-May-13 20:09:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-May-13 20:09:19 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-May-13 20:09:19 LOG5 begin_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2008-May-13 20:09:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-13 20:09:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2008-May-13 20:09:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-13 20:09:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-13 20:09:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-13 20:09:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 560.00 2008-May-13 20:09:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-13 20:09:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 2048.000000 MHz 2008-May-13 20:09:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1878.000000 MHz 2008-May-13 20:09:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1708.000000 MHz 2008-May-13 20:09:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1538.000000 MHz 2008-May-13 20:09:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1963.000000 MHz 2008-May-13 20:09:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1793.000000 MHz 2008-May-13 20:09:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1623.000000 MHz 2008-May-13 20:09:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 953.000000 MHz 2008-May-13 20:09:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.582 > 1.4)! 2008-May-13 20:09:22 LOG4 check_wapp_levels: WAPP-1 power levels: 1.582 1.396 1.537 1.411 2008-May-13 20:09:22 LOG4 check_wapp_levels: WAPP-2 power levels: 1.409 1.412 1.403 1.472 2008-May-13 20:09:22 LOG4 check_wapp_levels: WAPP-3 power levels: 1.349 1.366 1.483 1.326 2008-May-13 20:09:22 LOG4 check_wapp_levels: WAPP-4 power levels: 1.333 1.401 1.450 1.550 2008-May-13 20:09:24 INFO5 check_wapp_levels: WAPP power levels are between 1.325 and 1.576 (still bad) 2008-May-13 20:09:26 INFO5 check_wapp_levels: WAPP power levels are between 1.325 and 1.579 (still bad) 2008-May-13 20:09:28 INFO5 check_wapp_levels: WAPP power levels are between 1.326 and 1.573 (still bad) 2008-May-13 20:09:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-13 20:09:30 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-May-13 20:09:30 LOG5 end_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2008-May-13 20:09:30 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-May-13 20:09:30 LOG5 end_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2008-May-13 20:09:30 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2008-May-13 20:09:30 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2008-May-13 20:09:30 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2008-May-13 20:09:30 LOG5 antvel: Calling 'antvel 115900.000000 73000.000000 J 0' 2008-May-13 20:09:30 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +07:30:00.0 Epoch = 2008.36917 J 2008-May-13 20:09:30 LOG2 antvel: Computed apparent RA = 11:59:27.1 Dec = +07:27:06.1 2008-May-13 20:09:30 LOG2 antvel: Parameters to Doppler: Topocentric 86970 2008 134 0.0 2008-May-13 20:09:30 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-May-13 20:09:30 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2008-May-13 20:09:30 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2008-May-13 20:09:30 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-May-13 20:09:30 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-May-13 20:09:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2008-May-13 20:09:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-13 20:09:30 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-May-13 20:09:30 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-May-13 20:09:30 LOG5 begin_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2008-May-13 20:09:30 INFO3 take_spectra: Starting take_spectra 10 1 2008-May-13 20:09:30 LOG5 log_alfabeam: Parameters: 11.983333333333333 7.5 11.182204 2008.3691716100084 18.999933 2008-May-13 20:09:30 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333327 7.500000000000004 2008-May-13 20:09:30 LOG4 log_alfabeam: ALFABEAM 1 11.977450909739023 7.560117609922282 2008-May-13 20:09:30 LOG4 log_alfabeam: ALFABEAM 2 11.977619057604610 7.462088370662995 2008-May-13 20:09:30 LOG4 log_alfabeam: ALFABEAM 3 11.983486646185243 7.401658040245330 2008-May-13 20:09:30 LOG4 log_alfabeam: ALFABEAM 4 11.989223563382179 7.440037106746218 2008-May-13 20:09:30 LOG4 log_alfabeam: ALFABEAM 5 11.989043640546289 7.538471227227217 2008-May-13 20:09:30 LOG4 log_alfabeam: ALFABEAM 6 11.983138673389709 7.598120256356897 2008-May-13 20:09:30 INFO2 take_spectra: Starting WAPP+GALFA scan: 813400164 2008-May-13 20:09:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-May-13 20:09:31 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-May-13 20:09:31 LOG5 begin_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2008-May-13 20:09:31 INFO5 check_wapp_levels: WAPP power levels are between 1.323 and 1.582 (still bad) 2008-May-13 20:09:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-13 20:09:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2008-May-13 20:09:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-13 20:09:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-13 20:09:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-13 20:09:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 572.00 2008-May-13 20:09:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-13 20:09:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 2048.000000 MHz 2008-May-13 20:09:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1878.000000 MHz 2008-May-13 20:09:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1708.000000 MHz 2008-May-13 20:09:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1538.000000 MHz 2008-May-13 20:09:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1963.000000 MHz 2008-May-13 20:09:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1793.000000 MHz 2008-May-13 20:09:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1623.000000 MHz 2008-May-13 20:09:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 953.000000 MHz 2008-May-13 20:09:33 INFO5 check_wapp_levels: WAPP power levels are between 1.323 and 1.580 (still bad) 2008-May-13 20:09:35 INFO5 check_wapp_levels: WAPP power levels are between 1.282 and 1.510 (still bad) 2008-May-13 20:09:37 INFO5 check_wapp_levels: WAPP power levels are between 1.283 and 1.510 (still bad) 2008-May-13 20:09:39 INFO5 check_wapp_levels: WAPP power levels are between 1.283 and 1.511 (still bad) 2008-May-13 20:09:41 INFO5 check_wapp_levels: WAPP power levels are between 1.282 and 1.510 (still bad) 2008-May-13 20:09:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-13 20:09:42 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-May-13 20:09:42 LOG5 end_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2008-May-13 20:09:42 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-May-13 20:09:42 LOG5 end_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2008-May-13 20:09:42 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2008-May-13 20:09:42 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2008-May-13 20:09:42 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2008-May-13 20:09:42 LOG5 antvel: Calling 'antvel 115900.000000 73000.000000 J 0' 2008-May-13 20:09:42 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +07:30:00.0 Epoch = 2008.36917 J 2008-May-13 20:09:42 LOG2 antvel: Computed apparent RA = 11:59:27.1 Dec = +07:27:06.1 2008-May-13 20:09:42 LOG2 antvel: Parameters to Doppler: Topocentric 86982 2008 134 0.0 2008-May-13 20:09:42 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-May-13 20:09:42 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2008-May-13 20:09:42 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2008-May-13 20:09:42 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-May-13 20:09:42 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-May-13 20:09:42 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2008-May-13 20:09:42 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-13 20:09:42 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-May-13 20:09:42 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-May-13 20:09:42 LOG5 begin_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2008-May-13 20:09:42 INFO3 take_spectra: Starting take_spectra 10 1 2008-May-13 20:09:42 LOG5 log_alfabeam: Parameters: 11.983333333333333 7.5 11.185547 2008.3691719902654 18.999933 2008-May-13 20:09:42 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333331 7.499999999999993 2008-May-13 20:09:42 LOG4 log_alfabeam: ALFABEAM 1 11.977458941159185 7.560291011475201 2008-May-13 20:09:42 LOG4 log_alfabeam: ALFABEAM 2 11.977614012036845 7.462257486263033 2008-May-13 20:09:42 LOG4 log_alfabeam: ALFABEAM 3 11.983473499121125 7.401653459180904 2008-May-13 20:09:42 LOG4 log_alfabeam: ALFABEAM 4 11.989215574688794 7.439863880002100 2008-May-13 20:09:42 LOG4 log_alfabeam: ALFABEAM 5 11.989048747824080 7.538303584534367 2008-May-13 20:09:42 LOG4 log_alfabeam: ALFABEAM 6 11.983151699662251 7.598125536864043 2008-May-13 20:09:42 INFO2 take_spectra: Starting WAPP+GALFA scan: 813400165 2008-May-13 20:09:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-May-13 20:09:43 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-May-13 20:09:43 LOG5 begin_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2008-May-13 20:09:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-13 20:09:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2008-May-13 20:09:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-13 20:09:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-13 20:09:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-13 20:09:43 INFO5 check_wapp_levels: WAPP power levels are between 1.283 and 1.512 (still bad) 2008-May-13 20:09:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 584.00 2008-May-13 20:09:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-13 20:09:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 2048.000000 MHz 2008-May-13 20:09:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1878.000000 MHz 2008-May-13 20:09:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1708.000000 MHz 2008-May-13 20:09:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1538.000000 MHz 2008-May-13 20:09:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1963.000000 MHz 2008-May-13 20:09:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1793.000000 MHz 2008-May-13 20:09:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1623.000000 MHz 2008-May-13 20:09:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 953.000000 MHz 2008-May-13 20:09:45 INFO5 check_wapp_levels: WAPP power levels are between 1.283 and 1.512 (still bad) 2008-May-13 20:09:47 INFO5 check_wapp_levels: WAPP power levels are between 1.279 and 1.509 (still bad) 2008-May-13 20:09:49 INFO5 check_wapp_levels: WAPP power levels are between 1.278 and 1.508 (still bad) 2008-May-13 20:09:51 INFO5 check_wapp_levels: WAPP power levels are between 1.278 and 1.508 (still bad) 2008-May-13 20:09:53 INFO5 check_wapp_levels: WAPP power levels are between 1.279 and 1.508 (still bad) 2008-May-13 20:09:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-13 20:09:54 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-May-13 20:09:54 LOG5 end_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2008-May-13 20:09:54 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-May-13 20:09:54 LOG5 end_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2008-May-13 20:09:54 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2008-May-13 20:09:54 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2008-May-13 20:09:54 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2008-May-13 20:09:54 LOG5 antvel: Calling 'antvel 115900.000000 73000.000000 J 0' 2008-May-13 20:09:54 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +07:30:00.0 Epoch = 2008.36917 J 2008-May-13 20:09:54 LOG2 antvel: Computed apparent RA = 11:59:27.1 Dec = +07:27:06.1 2008-May-13 20:09:54 LOG2 antvel: Parameters to Doppler: Topocentric 86994 2008 134 0.0 2008-May-13 20:09:54 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-May-13 20:09:54 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2008-May-13 20:09:54 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2008-May-13 20:09:54 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-May-13 20:09:54 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-May-13 20:09:54 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2008-May-13 20:09:54 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-13 20:09:54 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-May-13 20:09:54 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-May-13 20:09:54 LOG5 begin_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2008-May-13 20:09:54 INFO3 take_spectra: Starting take_spectra 10 1 2008-May-13 20:09:54 LOG5 log_alfabeam: Parameters: 11.983333333333333 7.5 11.188889 2008.3691723705224 18.999933 2008-May-13 20:09:54 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333331 7.500000000000003 2008-May-13 20:09:54 LOG4 log_alfabeam: ALFABEAM 1 11.977467030915509 7.560464931283606 2008-May-13 20:09:54 LOG4 log_alfabeam: ALFABEAM 2 11.977608967210639 7.462427488653353 2008-May-13 20:09:54 LOG4 log_alfabeam: ALFABEAM 3 11.983460294105841 7.401649250036437 2008-May-13 20:09:54 LOG4 log_alfabeam: ALFABEAM 4 11.989207527892841 7.439690132931800 2008-May-13 20:09:54 LOG4 log_alfabeam: ALFABEAM 5 11.989053855022847 7.538135056952664 2008-May-13 20:09:54 LOG4 log_alfabeam: ALFABEAM 6 11.983164783601618 7.598130456129053 2008-May-13 20:09:54 INFO2 take_spectra: Starting WAPP+GALFA scan: 813400166 2008-May-13 20:09:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-May-13 20:09:55 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-May-13 20:09:55 LOG5 begin_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2008-May-13 20:09:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-13 20:09:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2008-May-13 20:09:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-13 20:09:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-13 20:09:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-13 20:09:55 INFO5 check_wapp_levels: WAPP power levels are between 1.279 and 1.507 (still bad) 2008-May-13 20:09:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 596.00 2008-May-13 20:09:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-13 20:09:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 2048.000000 MHz 2008-May-13 20:09:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1878.000000 MHz 2008-May-13 20:09:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1708.000000 MHz 2008-May-13 20:09:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1538.000000 MHz 2008-May-13 20:09:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1963.000000 MHz 2008-May-13 20:09:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1793.000000 MHz 2008-May-13 20:09:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1623.000000 MHz 2008-May-13 20:09:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 953.000000 MHz 2008-May-13 20:09:57 INFO5 check_wapp_levels: WAPP power levels are between 1.279 and 1.507 (still bad) 2008-May-13 20:09:59 INFO5 check_wapp_levels: WAPP power levels are between 1.272 and 1.503 (still bad) 2008-May-13 20:10:01 INFO5 check_wapp_levels: WAPP power levels are between 1.269 and 1.503 (still bad) 2008-May-13 20:10:03 INFO5 check_wapp_levels: WAPP power levels are between 1.271 and 1.504 (still bad) 2008-May-13 20:10:05 INFO5 check_wapp_levels: WAPP power levels are between 1.270 and 1.502 (still bad) 2008-May-13 20:10:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-13 20:10:06 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-May-13 20:10:06 LOG5 end_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2008-May-13 20:10:06 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-May-13 20:10:06 LOG5 end_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2008-May-13 20:10:06 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2008-May-13 20:10:06 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2008-May-13 20:10:06 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2008-May-13 20:10:06 LOG5 antvel: Calling 'antvel 115900.000000 73000.000000 J 0' 2008-May-13 20:10:06 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +07:30:00.0 Epoch = 2008.36917 J 2008-May-13 20:10:06 LOG2 antvel: Computed apparent RA = 11:59:27.1 Dec = +07:27:06.1 2008-May-13 20:10:06 LOG2 antvel: Parameters to Doppler: Topocentric 87006 2008 134 0.0 2008-May-13 20:10:06 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-May-13 20:10:06 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2008-May-13 20:10:06 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2008-May-13 20:10:06 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-May-13 20:10:06 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-May-13 20:10:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2008-May-13 20:10:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-13 20:10:06 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-May-13 20:10:06 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-May-13 20:10:06 LOG5 begin_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2008-May-13 20:10:06 INFO3 take_spectra: Starting take_spectra 10 1 2008-May-13 20:10:06 LOG5 log_alfabeam: Parameters: 11.983333333333333 7.5 11.192232 2008.3691727507794 18.999933 2008-May-13 20:10:06 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333333 7.500000000000003 2008-May-13 20:10:06 LOG4 log_alfabeam: ALFABEAM 1 11.977475184321939 7.560639473238648 2008-May-13 20:10:06 LOG4 log_alfabeam: ALFABEAM 2 11.977603920333951 7.462598484729862 2008-May-13 20:10:06 LOG4 log_alfabeam: ALFABEAM 3 11.983447022990141 7.401645415701123 2008-May-13 20:10:06 LOG4 log_alfabeam: ALFABEAM 4 11.989199417707033 7.439515761711633 2008-May-13 20:10:06 LOG4 log_alfabeam: ALFABEAM 5 11.989058964977502 7.537965538419528 2008-May-13 20:10:06 LOG4 log_alfabeam: ALFABEAM 6 11.983177933286978 7.598135011791872 2008-May-13 20:10:06 INFO2 take_spectra: Starting WAPP+GALFA scan: 813400167 2008-May-13 20:10:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-May-13 20:10:07 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-May-13 20:10:07 LOG5 begin_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2008-May-13 20:10:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-13 20:10:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2008-May-13 20:10:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-13 20:10:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-13 20:10:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-13 20:10:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 608.00 2008-May-13 20:10:08 INFO5 check_wapp_levels: WAPP power levels are between 1.270 and 1.503 (still bad) 2008-May-13 20:10:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-13 20:10:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 2048.000000 MHz 2008-May-13 20:10:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1878.000000 MHz 2008-May-13 20:10:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1708.000000 MHz 2008-May-13 20:10:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1538.000000 MHz 2008-May-13 20:10:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1963.000000 MHz 2008-May-13 20:10:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1793.000000 MHz 2008-May-13 20:10:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1623.000000 MHz 2008-May-13 20:10:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 953.000000 MHz 2008-May-13 20:10:10 INFO5 check_wapp_levels: WAPP power levels are between 1.265 and 1.499 (still bad) 2008-May-13 20:10:12 INFO5 check_wapp_levels: WAPP power levels are between 1.265 and 1.502 (still bad) 2008-May-13 20:10:14 INFO5 check_wapp_levels: WAPP power levels are between 1.267 and 1.499 (still bad) 2008-May-13 20:10:16 INFO5 check_wapp_levels: WAPP power levels are between 1.267 and 1.500 (still bad) 2008-May-13 20:10:18 INFO5 check_wapp_levels: WAPP power levels are between 1.269 and 1.501 (still bad) 2008-May-13 20:10:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-13 20:10:18 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-May-13 20:10:18 LOG5 end_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2008-May-13 20:10:18 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-May-13 20:10:18 LOG5 end_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2008-May-13 20:10:18 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2008-May-13 20:10:18 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2008-May-13 20:10:18 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2008-May-13 20:10:18 LOG5 antvel: Calling 'antvel 115900.000000 73000.000000 J 0' 2008-May-13 20:10:18 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +07:30:00.0 Epoch = 2008.36917 J 2008-May-13 20:10:18 LOG2 antvel: Computed apparent RA = 11:59:27.1 Dec = +07:27:06.1 2008-May-13 20:10:18 LOG2 antvel: Parameters to Doppler: Topocentric 87018 2008 134 0.0 2008-May-13 20:10:18 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-May-13 20:10:18 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2008-May-13 20:10:18 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2008-May-13 20:10:18 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-May-13 20:10:18 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-May-13 20:10:18 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2008-May-13 20:10:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-13 20:10:18 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-May-13 20:10:18 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-May-13 20:10:18 LOG5 begin_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2008-May-13 20:10:18 INFO3 take_spectra: Starting take_spectra 10 1 2008-May-13 20:10:18 LOG5 log_alfabeam: Parameters: 11.983333333333333 7.5 11.195574 2008.3691731310366 18.999933 2008-May-13 20:10:18 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333336 7.500000000000004 2008-May-13 20:10:18 LOG4 log_alfabeam: ALFABEAM 1 11.977483396975954 7.560814532678790 2008-May-13 20:10:18 LOG4 log_alfabeam: ALFABEAM 2 11.977598874656859 7.462770377357865 2008-May-13 20:10:18 LOG4 log_alfabeam: ALFABEAM 3 11.983433693467923 7.401641963934060 2008-May-13 20:10:18 LOG4 log_alfabeam: ALFABEAM 4 11.989191248508957 7.439340870864741 2008-May-13 20:10:18 LOG4 log_alfabeam: ALFABEAM 5 11.989064074405809 7.537795125135298 2008-May-13 20:10:18 LOG4 log_alfabeam: ALFABEAM 6 11.983191141099525 7.598139195766680 2008-May-13 20:10:18 INFO2 take_spectra: Starting WAPP+GALFA scan: 813400168 2008-May-13 20:10:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-May-13 20:10:19 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-May-13 20:10:19 LOG5 begin_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2008-May-13 20:10:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-13 20:10:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2008-May-13 20:10:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-13 20:10:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-13 20:10:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-13 20:10:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 620.00 2008-May-13 20:10:20 INFO5 check_wapp_levels: WAPP power levels are between 1.269 and 1.501 (still bad) 2008-May-13 20:10:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-13 20:10:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 2048.000000 MHz 2008-May-13 20:10:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1878.000000 MHz 2008-May-13 20:10:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1708.000000 MHz 2008-May-13 20:10:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1538.000000 MHz 2008-May-13 20:10:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1963.000000 MHz 2008-May-13 20:10:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1793.000000 MHz 2008-May-13 20:10:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1623.000000 MHz 2008-May-13 20:10:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 953.000000 MHz 2008-May-13 20:10:22 INFO5 check_wapp_levels: WAPP power levels are between 1.267 and 1.502 (still bad) 2008-May-13 20:10:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.502 > 1.4)! 2008-May-13 20:10:24 LOG4 check_wapp_levels: WAPP-1 power levels: 1.502 1.343 1.452 1.381 2008-May-13 20:10:24 LOG4 check_wapp_levels: WAPP-2 power levels: 1.378 1.361 1.309 1.425 2008-May-13 20:10:24 LOG4 check_wapp_levels: WAPP-3 power levels: 1.271 1.327 1.370 1.266 2008-May-13 20:10:24 LOG4 check_wapp_levels: WAPP-4 power levels: 1.298 1.354 1.413 1.500 2008-May-13 20:10:26 INFO5 check_wapp_levels: WAPP power levels are between 1.267 and 1.500 (still bad) 2008-May-13 20:10:28 INFO5 check_wapp_levels: WAPP power levels are between 1.267 and 1.500 (still bad) 2008-May-13 20:10:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-13 20:10:30 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-May-13 20:10:30 LOG5 end_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2008-May-13 20:10:30 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-May-13 20:10:30 LOG5 end_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2008-May-13 20:10:30 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2008-May-13 20:10:30 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2008-May-13 20:10:30 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2008-May-13 20:10:30 LOG5 antvel: Calling 'antvel 115900.000000 73000.000000 J 0' 2008-May-13 20:10:30 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +07:30:00.0 Epoch = 2008.36917 J 2008-May-13 20:10:30 LOG2 antvel: Computed apparent RA = 11:59:27.1 Dec = +07:27:06.1 2008-May-13 20:10:30 LOG2 antvel: Parameters to Doppler: Topocentric 87030 2008 134 0.0 2008-May-13 20:10:30 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-May-13 20:10:30 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2008-May-13 20:10:30 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2008-May-13 20:10:30 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-May-13 20:10:30 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-May-13 20:10:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2008-May-13 20:10:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-13 20:10:30 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-May-13 20:10:30 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-May-13 20:10:30 LOG5 begin_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2008-May-13 20:10:30 INFO3 take_spectra: Starting take_spectra 10 1 2008-May-13 20:10:30 LOG5 log_alfabeam: Parameters: 11.983333333333333 7.5 11.198917 2008.3691735112936 18.999933 2008-May-13 20:10:30 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333331 7.500000000000004 2008-May-13 20:10:30 LOG4 log_alfabeam: ALFABEAM 1 11.977491674270809 7.560990214077921 2008-May-13 20:10:30 LOG4 log_alfabeam: ALFABEAM 2 11.977593827394440 7.462943274582643 2008