2008-Apr-30 18:15:59 BEGIN executive: CIMA executive starting ... 2008-Apr-30 18:15:59 NOTE executive: STARTING NEW CIMA SESSION 2008-Apr-30 18:15:59 INFO1 executive: Using CIMA version 2.3.xx 'unusable' from 2008-04-29 17:36 2008-Apr-30 18:15:59 INFO4 executive: This is an ON-LINE session 2008-Apr-30 18:15:59 INFO4 executive: This is a REMOTE session 2008-Apr-30 18:15:59 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2008-Apr-30 18:16:00 INFO1 executive: CIMA session for project 'a2048' in 'line' mode for 'SS' 2008-Apr-30 18:16:00 INFO2 executive: Logging to '/share/obs4/usr/a2048/a2048.cimalog_20080430' 2008-Apr-30 18:16:00 LOG2 log_preferences: Currently applied preferences: 2008-Apr-30 18:16:00 LOG2 log_preferences: prefs(dailylog) = daily 2008-Apr-30 18:16:00 LOG2 log_preferences: prefs(offlinelog) = skip 2008-Apr-30 18:16:00 LOG2 log_preferences: prefs(datawindow) = ignore 2008-Apr-30 18:16:00 LOG2 log_preferences: prefs(limitwarning) = enabled 2008-Apr-30 18:16:00 LOG2 log_preferences: prefs(wappfailure) = abort 2008-Apr-30 18:16:00 LOG2 log_preferences: prefs(helpstyle) = stay-open 2008-Apr-30 18:16:00 LOG2 log_preferences: prefs(logcolours) = full 2008-Apr-30 18:16:00 LOG2 log_preferences: prefs(displaylevel) = INFO3 2008-Apr-30 18:16:00 LOG2 log_preferences: prefs(loglevel) = LOG5 2008-Apr-30 18:16:00 LOG2 log_preferences: prefs(displayformat) = short 2008-Apr-30 18:16:00 LOG2 log_preferences: prefs(logformat) = new 2008-Apr-30 18:16:00 LOG2 log_preferences: prefs(fontsize) = 4 2008-Apr-30 18:16:00 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2008-Apr-30 18:16:00 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2048 2008-Apr-30 18:16:00 ALERT executive: CIMA executive ready 2008-Apr-30 18:16:03 NOTE frontend: CIMA frontend ready 2008-Apr-30 18:16:04 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:16:04 LOG4 got_cormsg: From DATATAKING: setup 2008-Apr-30 18:16:07 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2008-Apr-30 18:16:07 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2008-Apr-30 18:16:07 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2008-Apr-30 18:16:07 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2008-Apr-30 18:16:07 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Apr-30 18:16:07 NOTE select_receiver: Starting to select receiver ALFA 2008-Apr-30 18:16:07 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Apr-30 18:16:07 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Apr-30 18:16:08 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Apr-30 18:16:08 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Apr-30 18:16:08 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Apr-30 18:16:08 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Apr-30 18:16:08 DONE finish_task: DONE finished selecting: receiver ALFA 2008-Apr-30 18:16:08 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-30 18:16:08 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Apr-30 18:16:08 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Apr-30 18:16:10 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0x300002 2008-Apr-30 18:16:10 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0x300002' 2008-Apr-30 18:16:10 LOG4 got_cormsg: From DATATAKING: vw% io 2008-Apr-30 18:16:10 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2008-Apr-30 18:16:10 LOG4 got_cormsg: From DATATAKING: 2008-Apr-30 18:16:10 LOG4 got_cormsg: From DATATAKING: vw% tape stat 2008-Apr-30 18:16:10 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2008-Apr-30 18:16:10 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2008-Apr-30 18:16:10 LOG4 got_cormsg: From DATATAKING: vw% connectall 2008-Apr-30 18:16:10 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2008-Apr-30 18:16:10 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2008-Apr-30 18:16:10 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2008-Apr-30 18:16:10 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2008-Apr-30 18:16:10 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2008-Apr-30 18:16:10 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2008-Apr-30 18:16:10 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2008-Apr-30 18:16:10 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2008-Apr-30 18:16:10 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2048 2008-Apr-30 18:16:10 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Apr-30 18:16:10 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Apr-30 18:16:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:16:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:16:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:16:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:16:18 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2008-Apr-30 18:16:18 LOG4 exec_msg: From OBSERVER: restart_wapp 2008-Apr-30 18:16:18 LOG5 restart_wapp: Calling 'restart_wapp' 2008-Apr-30 18:16:18 BEGIN begin_task: Starting task 'restarting the WAPPs' 2008-Apr-30 18:16:18 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Apr-30 18:16:19 NOTE restart_wapp: Restarting all WAPPs 2008-Apr-30 18:16:19 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2008-Apr-30 18:16:19 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2008-Apr-30 18:16:19 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Apr-30 18:16:19 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Apr-30 18:16:22 ALERT WAPP=2-wappcon: WAPP2 restarting 2008-Apr-30 18:16:22 ALERT WAPP=3-wappcon: WAPP3 restarting 2008-Apr-30 18:16:22 ALERT WAPP=1-wappcon: WAPP1 restarting 2008-Apr-30 18:16:22 ALERT WAPP=4-wappcon: WAPP4 restarting 2008-Apr-30 18:16:58 INFO1 CIMA-run_command_file: Transferring command file 'command_galfasrc.cmd ' to executive ... 2008-Apr-30 18:16:58 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 5 {LOAD togs_ages.conf} 2008-Apr-30 18:16:58 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 6 {CATALOG togs_ages.cat} 2008-Apr-30 18:16:58 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {GOTO galfasrc} 2008-Apr-30 18:16:58 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {ALFAANGLE 19} 2008-Apr-30 18:16:58 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {WAITTRACK} 2008-Apr-30 18:16:58 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 13 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2008-Apr-30 18:16:58 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-Apr-30 18:16:58 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc.cmd 1 1 6 2008-Apr-30 18:16:58 LOG4 run_command_file: Calling 'run_command_file command_galfasrc.cmd 1 1 6' 2008-Apr-30 18:16:58 BEGIN begin_task: Starting task 'running command file 'command_galfasrc.cmd'' 2008-Apr-30 18:16:58 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Apr-30 18:16:58 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc.cmd' ...} 2008-Apr-30 18:16:58 NOTE run_command_file: Starting execution of command file 'command_galfasrc.cmd' from line 1 2008-Apr-30 18:16:58 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_ages.conf' 2008-Apr-30 18:16:58 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2008-Apr-30 18:16:58 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-30 18:16:58 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2008-Apr-30 18:16:58 NOTE CIMA-load_config_file: Loading configuration file 'togs_ages.conf' 2008-Apr-30 18:16:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Apr-30 18:16:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Apr-30 18:16:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Apr-30 18:16:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Apr-30 18:16:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Apr-30 18:16:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2008-Apr-30 18:16:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Apr-30 18:16:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1381.2" 2008-Apr-30 18:16:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1381.2" 2008-Apr-30 18:16:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1381.2" 2008-Apr-30 18:16:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1381.2" 2008-Apr-30 18:16:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1381.2" 2008-Apr-30 18:16:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1381.2" 2008-Apr-30 18:16:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1381.2" 2008-Apr-30 18:16:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1381.2" 2008-Apr-30 18:16:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1381.2" 2008-Apr-30 18:16:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Apr-30 18:16:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Apr-30 18:16:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Apr-30 18:16:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Apr-30 18:16:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Apr-30 18:16:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Apr-30 18:16:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Apr-30 18:16:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Apr-30 18:16:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Apr-30 18:16:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Apr-30 18:16:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Apr-30 18:16:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Apr-30 18:16:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Apr-30 18:16:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2008-Apr-30 18:16:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Apr-30 18:16:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Apr-30 18:16:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Apr-30 18:16:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Apr-30 18:16:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Apr-30 18:16:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Apr-30 18:16:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Apr-30 18:16:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Apr-30 18:16:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Apr-30 18:16:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1631.200000" 2008-Apr-30 18:16:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Apr-30 18:16:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Apr-30 18:16:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Apr-30 18:16:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Apr-30 18:16:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Apr-30 18:16:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Apr-30 18:16:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Apr-30 18:16:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Apr-30 18:16:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Apr-30 18:17:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Apr-30 18:17:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Apr-30 18:17:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Apr-30 18:17:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Apr-30 18:17:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Apr-30 18:17:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Apr-30 18:17:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Apr-30 18:17:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Apr-30 18:17:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Apr-30 18:17:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Apr-30 18:17:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Apr-30 18:17:00 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Apr-30 18:17:00 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Apr-30 18:17:00 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Apr-30 18:17:00 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Apr-30 18:17:00 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Apr-30 18:17:00 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Apr-30 18:17:00 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Apr-30 18:17:00 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Apr-30 18:17:00 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Apr-30 18:17:00 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Apr-30 18:17:00 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Apr-30 18:17:00 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Apr-30 18:17:00 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Apr-30 18:17:00 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Apr-30 18:17:00 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Apr-30 18:17:00 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Apr-30 18:17:00 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Apr-30 18:17:00 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Apr-30 18:17:00 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Apr-30 18:17:00 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-30 18:17:00 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Apr-30 18:17:00 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Apr-30 18:17:00 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Apr-30 18:17:00 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Apr-30 18:17:00 INFO1 config_iflo: Selecting receiver ALFA 2008-Apr-30 18:17:00 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2008-Apr-30 18:17:00 LOG1 select_receiver: Calling 'select_receiver alfa no no no' 2008-Apr-30 18:17:00 START begin_task: Starting task 'selecting receiver ALFA' 2008-Apr-30 18:17:00 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Apr-30 18:17:00 NOTE select_receiver: Starting to select receiver ALFA 2008-Apr-30 18:17:00 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Apr-30 18:17:00 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Apr-30 18:17:00 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Apr-30 18:17:00 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Apr-30 18:17:00 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Apr-30 18:17:00 LOG5 finish_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Apr-30 18:17:00 INFO2 finish_task: DONE finished selecting: receiver ALFA 2008-Apr-30 18:17:00 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 18:17:00 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Apr-30 18:17:00 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Apr-30 18:17:00 START begin_task: Starting task 'waiting for receiver ALFA' 2008-Apr-30 18:17:00 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2008-Apr-30 18:17:00 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2008-Apr-30 18:17:00 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2008-Apr-30 18:17:00 INFO1 config_iflo: Configuring rest of the IF/LO path 2008-Apr-30 18:17:00 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2008-Apr-30 18:17:00 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-30 18:17:01 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-30 18:17:01 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-30 18:17:01 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2008-Apr-30 18:17:01 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-30 18:17:01 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-30 18:17:01 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2008-Apr-30 18:17:01 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-30 18:17:01 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-30 18:17:01 LOG3 vw_send: To DATATAKING: alfafb 1 2008-Apr-30 18:17:01 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2008-Apr-30 18:17:01 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Apr-30 18:17:01 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Apr-30 18:17:01 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2008-Apr-30 18:17:01 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2008-Apr-30 18:17:01 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2008-Apr-30 18:17:01 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2008-Apr-30 18:17:01 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2008-Apr-30 18:17:01 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2008-Apr-30 18:17:01 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Apr-30 18:17:01 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Apr-30 18:17:01 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Apr-30 18:17:01 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Apr-30 18:17:01 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Apr-30 18:17:01 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2008-Apr-30 18:17:01 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2008-Apr-30 18:17:01 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2008-Apr-30 18:17:01 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2008-Apr-30 18:17:01 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Apr-30 18:17:01 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2008-Apr-30 18:17:01 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Apr-30 18:17:01 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Apr-30 18:17:01 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 18:17:01 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Apr-30 18:17:01 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2008-Apr-30 18:17:01 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Apr-30 18:17:01 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2008-Apr-30 18:17:01 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2008-Apr-30 18:17:01 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Apr-30 18:17:01 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 18:17:01 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Apr-30 18:17:01 LOG5 begin_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2008-Apr-30 18:17:01 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Apr-30 18:17:01 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Apr-30 18:17:01 LOG4 got_cormsg: From DATATAKING: alfafb 1 2008-Apr-30 18:17:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2008-Apr-30 18:17:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2008-Apr-30 18:17:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2008-Apr-30 18:17:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2008-Apr-30 18:17:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2008-Apr-30 18:17:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2008-Apr-30 18:17:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2008-Apr-30 18:17:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2008-Apr-30 18:17:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2008-Apr-30 18:17:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2008-Apr-30 18:17:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2008-Apr-30 18:17:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Apr-30 18:17:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2008-Apr-30 18:17:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Apr-30 18:17:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 18:17:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Apr-30 18:17:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2008-Apr-30 18:17:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2008-Apr-30 18:17:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2008-Apr-30 18:17:01 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 18:17:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:17:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:17:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:17:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:17:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:17:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:17:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:17:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:17:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:17:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:17:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:17:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:17:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:17:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:17:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:17:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:17:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:17:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:17:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:17:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:17:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:17:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:17:16 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-30 18:17:16 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Apr-30 18:17:16 LOG5 end_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2008-Apr-30 18:17:16 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Apr-30 18:17:16 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Apr-30 18:17:16 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Apr-30 18:17:16 DONE finish_task: DONE finished configuration: IF/LO path 2008-Apr-30 18:17:16 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-30 18:17:16 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Apr-30 18:17:16 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Apr-30 18:17:16 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Apr-30 18:17:16 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Apr-30 18:17:16 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Apr-30 18:17:16 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Apr-30 18:17:16 START begin_task: Starting task 'selecting calibration port' 2008-Apr-30 18:17:16 LOG5 begin_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-Apr-30 18:17:16 LOG3 vw_send: To DATATAKING: calport 3 2008-Apr-30 18:17:16 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Apr-30 18:17:16 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 18:17:16 START begin_task: Starting task 'waiting on calport' 2008-Apr-30 18:17:16 LOG5 begin_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2008-Apr-30 18:17:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:17:17 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Apr-30 18:17:17 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 18:17:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:17:17 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-30 18:17:17 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Apr-30 18:17:17 LOG5 end_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2008-Apr-30 18:17:17 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Apr-30 18:17:17 STOP finish_task: Finishing task 'selecting calibration port' 2008-Apr-30 18:17:17 LOG5 finish_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-Apr-30 18:17:17 INFO2 finish_task: DONE finished configuring: calibration port 2008-Apr-30 18:17:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 18:17:17 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Apr-30 18:17:17 LOG5 end_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-Apr-30 18:17:17 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Apr-30 18:17:17 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Apr-30 18:17:17 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Apr-30 18:17:17 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Apr-30 18:17:17 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Apr-30 18:17:17 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Apr-30 18:17:17 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Apr-30 18:17:17 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Apr-30 18:17:17 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 SS 2008-Apr-30 18:17:17 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 SS 2008-Apr-30 18:17:17 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 SS 2008-Apr-30 18:17:17 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 SS 2008-Apr-30 18:17:17 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Apr-30 18:17:17 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Apr-30 18:17:17 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-30 18:17:17 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2008-Apr-30 18:17:17 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-30 18:17:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:17:17 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-30 18:17:17 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-30 18:17:17 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-30 18:17:17 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2008-Apr-30 18:17:17 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 SS 2008-Apr-30 18:17:17 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 SS 2008-Apr-30 18:17:17 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 SS 2008-Apr-30 18:17:17 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 SS 2008-Apr-30 18:17:17 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Apr-30 18:17:17 LOG5 finish_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Apr-30 18:17:17 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Apr-30 18:17:17 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-30 18:17:17 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Apr-30 18:17:17 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Apr-30 18:17:17 COMMAND run_command_line: EXECUTING command 6: 'CATALOG togs_ages.cat' 2008-Apr-30 18:17:17 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/togs_ages.cat' 2008-Apr-30 18:17:17 COMMAND run_command_line: EXECUTING command 7: 'GOTO galfasrc' 2008-Apr-30 18:17:17 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2048/togs_ages.cat galfasrc nooffset nowait' 2008-Apr-30 18:17:17 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2008-Apr-30 18:17:18 LOG5 begin_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2008-Apr-30 18:17:18 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2008-Apr-30 18:17:18 LOG3 track_source: Calling 'track_source galfasrc 094300.0 +215300 J 0.0 0.0 main small /share/obs4/usr/a2048/togs_ages.cat 0 Topocentric velocity(optical)' 2008-Apr-30 18:17:18 START begin_task: Starting task 'sending tracking commands' 2008-Apr-30 18:17:18 LOG5 begin_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2008-Apr-30 18:17:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2008-Apr-30 18:17:18 INFO1 track_source: Starting to track galfasrc 2008-Apr-30 18:17:18 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2008-Apr-30 18:17:18 LOG3 vw_send: To DATATAKING: set ra 094300.0 2008-Apr-30 18:17:18 LOG3 vw_send: To DATATAKING: set dec +215300 2008-Apr-30 18:17:18 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-30 18:17:18 LOG3 vw_send: To DATATAKING: pnt tr 094300.0 +215300 -CJ 2008-Apr-30 18:17:18 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Apr-30 18:17:18 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-30 18:17:18 LOG5 finish_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2008-Apr-30 18:17:18 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-30 18:17:18 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 18:17:18 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-30 18:17:18 LOG5 end_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2008-Apr-30 18:17:18 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2008-Apr-30 18:17:18 LOG5 finish_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2008-Apr-30 18:17:18 DONE finish_task: DONE finished tracking: source 'galfasrc' 2008-Apr-30 18:17:18 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-30 18:17:18 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2008-Apr-30 18:17:18 LOG5 end_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2008-Apr-30 18:17:18 COMMAND run_command_line: EXECUTING command 8: 'ALFAANGLE 19' 2008-Apr-30 18:17:18 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2008-Apr-30 18:17:18 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Apr-30 18:17:18 LOG5 begin_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2008-Apr-30 18:17:18 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Apr-30 18:17:18 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Apr-30 18:17:18 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-Apr-30 18:17:18 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-30 18:17:18 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-30 18:17:18 LOG5 begin_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2008-Apr-30 18:17:18 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 SS' 2008-Apr-30 18:17:18 NOTE WAPPDATA-new_file: New FITS file: wapp.20080430.a2048.0000.fits 2008-Apr-30 18:17:18 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2008-Apr-30 18:17:18 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Apr-30 18:17:18 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Apr-30 18:17:18 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20080430.a2048.0000.fits} 2008-Apr-30 18:17:18 LOG4 got_cormsg: From DATATAKING: set ra 094300.0 2008-Apr-30 18:17:18 LOG4 got_cormsg: From DATATAKING: set dec +215300 2008-Apr-30 18:17:18 LOG4 got_cormsg: From DATATAKING: vw% 094300.0 2008-Apr-30 18:17:18 LOG4 got_cormsg: From DATATAKING: 2008-Apr-30 18:17:18 LOG4 got_cormsg: From DATATAKING: vw% +215300 2008-Apr-30 18:17:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:17:18 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-30 18:17:18 LOG4 got_cormsg: From DATATAKING: pnt tr 094300.0 +215300 -CJ 2008-Apr-30 18:17:18 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Apr-30 18:17:18 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-30 18:17:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:17:19 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 SS' 2008-Apr-30 18:17:39 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-30 18:17:39 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Apr-30 18:17:39 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-30 18:17:39 LOG5 end_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2008-Apr-30 18:17:39 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-30 18:17:39 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Apr-30 18:17:39 LOG5 finish_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2008-Apr-30 18:17:39 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Apr-30 18:17:39 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-30 18:17:39 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Apr-30 18:17:39 LOG5 end_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2008-Apr-30 18:17:39 COMMAND run_command_line: EXECUTING command 9: 'WAITTRACK' 2008-Apr-30 18:17:39 BEGIN begin_task: Starting task 'waiting on telescope' 2008-Apr-30 18:17:39 LOG5 begin_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2008-Apr-30 18:17:39 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-30 18:17:39 LOG3 waittrk: Start waittrk 5 2008-Apr-30 18:17:39 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-30 18:17:39 LOG5 begin_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2008-Apr-30 18:17:44 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-30 18:17:44 LOG5 end_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2008-Apr-30 18:17:44 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-30 18:17:44 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2008-Apr-30 18:21:50 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-30 18:21:50 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2008-Apr-30 18:21:50 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-30 18:21:50 INFO2 waittrk: Now tracking galfasrc 2008-Apr-30 18:21:50 LOG4 waittrk: Current telescope position: Az = 254.86 ZA = 17.21 2008-Apr-30 18:21:50 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-30 18:21:50 LOG5 finish_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2008-Apr-30 18:21:50 DONE finish_task: DONE finished waiting: telescope on source 2008-Apr-30 18:21:50 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-30 18:21:50 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-30 18:21:50 LOG5 end_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2008-Apr-30 18:21:50 COMMAND run_command_line: EXECUTING command 13: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2008-Apr-30 18:21:50 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2008-Apr-30 18:21:52 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-30 18:21:52 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first 0 {1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2008-Apr-30 18:21:52 BEGIN begin_task: Starting task 'smart frequency switching' 2008-Apr-30 18:21:52 LOG5 begin_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2008-Apr-30 18:21:52 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'galfasrc' 2008-Apr-30 18:21:52 INFO1 smartfreq: Starting pattern: Smart frequency switching 2008-Apr-30 18:21:52 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2008-Apr-30 18:21:52 START begin_task: Starting task 'selecting calibration type' 2008-Apr-30 18:21:52 LOG5 begin_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2008-Apr-30 18:21:52 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-30 18:21:52 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-30 18:21:52 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 18:21:52 START begin_task: Starting task 'waiting on setcal' 2008-Apr-30 18:21:52 LOG5 begin_task: Level: (4) ID = <10022> Status = 0 0 0 0 ok 2008-Apr-30 18:21:52 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-30 18:21:52 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 18:21:52 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:21:52 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-30 18:21:52 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-30 18:21:52 LOG5 end_task: Level: (4) ID = <10022> Status = 0 0 0 0 ok 2008-Apr-30 18:21:52 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-30 18:21:52 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-30 18:21:52 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-30 18:21:52 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-30 18:21:52 LOG5 begin_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2008-Apr-30 18:21:52 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:21:52 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-30 18:21:52 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-30 18:21:52 LOG5 end_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2008-Apr-30 18:21:52 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-30 18:21:52 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-30 18:21:52 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-30 18:21:52 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-30 18:21:52 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-30 18:21:52 LOG5 begin_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2008-Apr-30 18:21:52 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-30 18:21:52 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-30 18:21:52 LOG5 end_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2008-Apr-30 18:21:53 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-30 18:21:53 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-30 18:21:53 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-30 18:21:53 LOG5 finish_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2008-Apr-30 18:21:53 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-30 18:21:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 18:21:53 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-30 18:21:53 LOG5 end_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2008-Apr-30 18:21:53 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 SS 2008-Apr-30 18:21:53 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 SS 2008-Apr-30 18:21:53 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 SS 2008-Apr-30 18:21:53 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 SS 2008-Apr-30 18:21:53 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20080430.a2048.0000.fits' is empty! 2008-Apr-30 18:21:53 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2008-Apr-30 18:21:53 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-30 18:21:53 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2008-Apr-30 18:21:53 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-30 18:21:53 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-30 18:21:53 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-30 18:21:53 LOG5 begin_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2008-Apr-30 18:21:53 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-30 18:21:53 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-30 18:21:53 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-30 18:21:53 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-30 18:21:53 LOG5 end_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2008-Apr-30 18:21:53 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2008-Apr-30 18:21:53 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-30 18:21:53 LOG5 begin_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-Apr-30 18:21:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-30 18:21:53 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-30 18:21:53 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-30 18:21:53 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-30 18:21:53 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 18:21:53 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-30 18:21:53 LOG5 begin_task: Level: (4) ID = <10027> Status = 0 0 0 0 ok 2008-Apr-30 18:21:53 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-30 18:21:53 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 18:21:53 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 SS' 2008-Apr-30 18:21:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:21:56 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-30 18:21:56 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-30 18:21:56 LOG5 end_task: Level: (4) ID = <10027> Status = 0 0 0 0 ok 2008-Apr-30 18:21:56 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-30 18:21:56 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-30 18:21:56 LOG5 begin_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2008-Apr-30 18:21:56 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-30 18:21:56 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-30 18:21:56 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-30 18:21:56 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-30 18:21:56 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-30 18:21:56 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-30 18:21:56 LOG5 begin_task: Level: (5) ID = <10029> Status = 0 0 0 0 ok 2008-Apr-30 18:21:56 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-30 18:21:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:21:56 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 1 dB --- beam 1: 8 7 dB 2008-Apr-30 18:21:56 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 6 dB 2008-Apr-30 18:21:56 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-30 18:21:56 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 2 3 dB 2008-Apr-30 18:21:56 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-30 18:21:57 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-30 18:21:57 LOG5 end_task: Level: (5) ID = <10029> Status = 0 0 0 0 ok 2008-Apr-30 18:21:57 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.955 0.995 ALFA beam 1: 0.897 0.911 2008-Apr-30 18:21:57 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.029 0.987 ALFA beam 3: 0.985 1.092 2008-Apr-30 18:21:57 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.950 0.960 ALFA beam 5: 1.021 0.909 2008-Apr-30 18:21:57 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.992 1.013 ALFA beam 7: 1.086 0.904 2008-Apr-30 18:21:57 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-30 18:21:57 LOG5 finish_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2008-Apr-30 18:21:57 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-30 18:21:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 18:21:57 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-30 18:21:57 LOG5 end_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2008-Apr-30 18:21:57 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-30 18:21:57 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-30 18:21:57 LOG5 finish_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-Apr-30 18:21:57 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-30 18:21:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 18:21:57 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-30 18:21:57 LOG5 end_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-Apr-30 18:21:57 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2008-Apr-30 18:21:57 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2008-Apr-30 18:21:57 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2008-Apr-30 18:21:57 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-30 18:21:57 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.33338 J 2008-Apr-30 18:21:57 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.7 2008-Apr-30 18:21:57 LOG2 antvel: Parameters to Doppler: Topocentric 80516 2008 121 0.0 2008-Apr-30 18:21:57 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-30 18:21:57 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2008-Apr-30 18:21:57 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2008-Apr-30 18:21:57 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-30 18:21:57 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-30 18:21:57 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Apr-30 18:21:57 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 18:21:57 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-30 18:21:57 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-30 18:21:57 LOG5 begin_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2008-Apr-30 18:21:57 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-30 18:21:57 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.530293 2008.333375034857 18.999933 2008-Apr-30 18:21:57 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333329 2008-Apr-30 18:21:57 LOG4 log_alfabeam: ALFABEAM 1 9.709414177532299 21.850572956501757 2008-Apr-30 18:21:57 LOG4 log_alfabeam: ALFABEAM 2 9.715107486820711 21.792837809549585 2008-Apr-30 18:21:57 LOG4 log_alfabeam: ALFABEAM 3 9.722366725392398 21.825216606266039 2008-Apr-30 18:21:57 LOG4 log_alfabeam: ALFABEAM 4 9.723919067326836 21.916223751028074 2008-Apr-30 18:21:57 LOG4 log_alfabeam: ALFABEAM 5 9.718194205668009 21.974098169658582 2008-Apr-30 18:21:57 LOG4 log_alfabeam: ALFABEAM 6 9.710948712103342 21.940826433696660 2008-Apr-30 18:21:57 INFO2 take_spectra: Starting WAPP+GALFA scan: 812100071 2008-Apr-30 18:21:57 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-30 18:21:57 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-30 18:21:57 LOG5 begin_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2008-Apr-30 18:21:57 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-30 18:21:57 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Apr-30 18:21:57 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 18:21:57 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:21:57 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:21:57 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80518.00 2008-Apr-30 18:21:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-30 18:21:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:21:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:21:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-30 18:21:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:21:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:21:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:21:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:21:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:22:08 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-30 18:22:08 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-30 18:22:08 LOG5 end_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2008-Apr-30 18:22:08 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-30 18:22:08 LOG5 end_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2008-Apr-30 18:22:08 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2008-Apr-30 18:22:08 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2008-Apr-30 18:22:08 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2008-Apr-30 18:22:08 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-30 18:22:08 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.33338 J 2008-Apr-30 18:22:08 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.7 2008-Apr-30 18:22:08 LOG2 antvel: Parameters to Doppler: Topocentric 80528 2008 121 0.0 2008-Apr-30 18:22:08 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-30 18:22:08 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2008-Apr-30 18:22:08 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2008-Apr-30 18:22:08 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-30 18:22:08 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-30 18:22:08 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Apr-30 18:22:08 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 18:22:08 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-30 18:22:08 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-30 18:22:08 LOG5 begin_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2008-Apr-30 18:22:08 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-30 18:22:08 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.533635 2008.333375415114 18.999933 2008-Apr-30 18:22:08 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666663 21.883333333333340 2008-Apr-30 18:22:08 LOG4 log_alfabeam: ALFABEAM 1 9.709415863134911 21.850500887485424 2008-Apr-30 18:22:08 LOG4 log_alfabeam: ALFABEAM 2 9.715112097145830 21.792822666113601 2008-Apr-30 18:22:08 LOG4 log_alfabeam: ALFABEAM 3 9.722369697760074 21.825272669625996 2008-Apr-30 18:22:08 LOG4 log_alfabeam: ALFABEAM 4 9.723917368114266 21.916296394247837 2008-Apr-30 18:22:08 LOG4 log_alfabeam: ALFABEAM 5 9.718189479744954 21.974113774417493 2008-Apr-30 18:22:08 LOG4 log_alfabeam: ALFABEAM 6 9.710945733932327 21.940768537553300 2008-Apr-30 18:22:08 INFO2 take_spectra: Starting WAPP+GALFA scan: 812100072 2008-Apr-30 18:22:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-30 18:22:09 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-30 18:22:09 LOG5 begin_task: Level: (4) ID = <10033> Status = 0 0 0 0 ok 2008-Apr-30 18:22:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-30 18:22:09 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Apr-30 18:22:09 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 18:22:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:22:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:22:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80530.00 2008-Apr-30 18:22:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-30 18:22:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:22:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:22:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-30 18:22:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:22:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:22:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:22:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:22:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:22:20 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-30 18:22:20 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-30 18:22:20 LOG5 end_task: Level: (4) ID = <10033> Status = 0 0 0 0 ok 2008-Apr-30 18:22:20 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-30 18:22:20 LOG5 end_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2008-Apr-30 18:22:20 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2008-Apr-30 18:22:20 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2008-Apr-30 18:22:20 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2008-Apr-30 18:22:20 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-30 18:22:20 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.33338 J 2008-Apr-30 18:22:20 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.7 2008-Apr-30 18:22:20 LOG2 antvel: Parameters to Doppler: Topocentric 80540 2008 121 0.0 2008-Apr-30 18:22:20 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-30 18:22:20 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2008-Apr-30 18:22:20 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2008-Apr-30 18:22:20 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-30 18:22:20 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-30 18:22:20 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Apr-30 18:22:20 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 18:22:20 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-30 18:22:20 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-30 18:22:20 LOG5 begin_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2008-Apr-30 18:22:20 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-30 18:22:20 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.536978 2008.333375795371 18.999933 2008-Apr-30 18:22:20 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333333 2008-Apr-30 18:22:20 LOG4 log_alfabeam: ALFABEAM 1 9.709417559998073 21.850428512987765 2008-Apr-30 18:22:20 LOG4 log_alfabeam: ALFABEAM 2 9.715116728829006 21.792807501089268 2008-Apr-30 18:22:20 LOG4 log_alfabeam: ALFABEAM 3 9.722372680555280 21.825329012855537 2008-Apr-30 18:22:20 LOG4 log_alfabeam: ALFABEAM 4 9.723915657506167 21.916369345826038 2008-Apr-30 18:22:20 LOG4 log_alfabeam: ALFABEAM 5 9.718184731788618 21.974129401436091 2008-Apr-30 18:22:20 LOG4 log_alfabeam: ALFABEAM 6 9.710942745460244 21.940710351338275 2008-Apr-30 18:22:20 INFO2 take_spectra: Starting WAPP+GALFA scan: 812100073 2008-Apr-30 18:22:21 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-30 18:22:21 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-30 18:22:21 LOG5 begin_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2008-Apr-30 18:22:21 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-30 18:22:21 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Apr-30 18:22:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 18:22:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:22:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:22:21 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80542.00 2008-Apr-30 18:22:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-30 18:22:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:22:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:22:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-30 18:22:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:22:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:22:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:22:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:22:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:22:32 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-30 18:22:32 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-30 18:22:32 LOG5 end_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2008-Apr-30 18:22:32 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-30 18:22:32 LOG5 end_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2008-Apr-30 18:22:32 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2008-Apr-30 18:22:32 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2008-Apr-30 18:22:32 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2008-Apr-30 18:22:32 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-30 18:22:32 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.33338 J 2008-Apr-30 18:22:32 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.7 2008-Apr-30 18:22:32 LOG2 antvel: Parameters to Doppler: Topocentric 80552 2008 121 0.0 2008-Apr-30 18:22:32 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-30 18:22:32 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2008-Apr-30 18:22:32 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2008-Apr-30 18:22:32 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-30 18:22:32 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-30 18:22:32 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Apr-30 18:22:32 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 18:22:32 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-30 18:22:32 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-30 18:22:32 LOG5 begin_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2008-Apr-30 18:22:32 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-30 18:22:32 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.540320 2008.3333761756282 18.999933 2008-Apr-30 18:22:32 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333347 2008-Apr-30 18:22:32 LOG4 log_alfabeam: ALFABEAM 1 9.709419267209221 21.850355874132397 2008-Apr-30 18:22:32 LOG4 log_alfabeam: ALFABEAM 2 9.715121379261427 21.792792323624667 2008-Apr-30 18:22:32 LOG4 log_alfabeam: ALFABEAM 3 9.722375672056078 21.825385604473770 2008-Apr-30 18:22:32 LOG4 log_alfabeam: ALFABEAM 4 9.723913936421908 21.916442564312451 2008-Apr-30 18:22:32 LOG4 log_alfabeam: ALFABEAM 5 9.718179964472112 21.974145041279613 2008-Apr-30 18:22:32 LOG4 log_alfabeam: ALFABEAM 6 9.710939748414653 21.940651907559502 2008-Apr-30 18:22:32 INFO2 take_spectra: Starting WAPP+GALFA scan: 812100074 2008-Apr-30 18:22:33 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-30 18:22:33 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-30 18:22:33 LOG5 begin_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2008-Apr-30 18:22:33 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-30 18:22:33 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Apr-30 18:22:33 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 18:22:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:22:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:22:33 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80554.00 2008-Apr-30 18:22:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-30 18:22:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:22:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:22:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-30 18:22:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:22:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:22:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:22:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:22:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:22:44 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-30 18:22:44 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-30 18:22:44 LOG5 end_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2008-Apr-30 18:22:44 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-30 18:22:44 LOG5 end_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2008-Apr-30 18:22:44 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2008-Apr-30 18:22:44 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2008-Apr-30 18:22:44 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2008-Apr-30 18:22:44 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-30 18:22:44 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.33338 J 2008-Apr-30 18:22:44 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.7 2008-Apr-30 18:22:44 LOG2 antvel: Parameters to Doppler: Topocentric 80564 2008 121 0.0 2008-Apr-30 18:22:44 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-30 18:22:44 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2008-Apr-30 18:22:44 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2008-Apr-30 18:22:44 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-30 18:22:44 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-30 18:22:44 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Apr-30 18:22:44 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 18:22:44 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-30 18:22:44 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-30 18:22:44 LOG5 begin_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2008-Apr-30 18:22:44 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-30 18:22:44 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.543663 2008.3333765558853 18.999933 2008-Apr-30 18:22:44 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333333 2008-Apr-30 18:22:44 LOG4 log_alfabeam: ALFABEAM 1 9.709420985893949 21.850282925251150 2008-Apr-30 18:22:44 LOG4 log_alfabeam: ALFABEAM 2 9.715126051390060 21.792777124715673 2008-Apr-30 18:22:44 LOG4 log_alfabeam: ALFABEAM 3 9.722378674115781 21.825442480600412 2008-Apr-30 18:22:44 LOG4 log_alfabeam: ALFABEAM 4 9.723912203726170 21.916516095740864 2008-Apr-30 18:22:44 LOG4 log_alfabeam: ALFABEAM 5 9.718175174773208 21.974160703218185 2008-Apr-30 18:22:44 LOG4 log_alfabeam: ALFABEAM 6 9.710936740941181 21.940593168912564 2008-Apr-30 18:22:44 INFO2 take_spectra: Starting WAPP+GALFA scan: 812100075 2008-Apr-30 18:22:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-30 18:22:45 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-30 18:22:45 LOG5 begin_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2008-Apr-30 18:22:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-30 18:22:45 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Apr-30 18:22:45 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 18:22:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:22:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:22:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80566.00 2008-Apr-30 18:22:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-30 18:22:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:22:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:22:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-30 18:22:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:22:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:22:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:22:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:22:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:22:56 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-30 18:22:56 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-30 18:22:56 LOG5 end_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2008-Apr-30 18:22:56 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-30 18:22:56 LOG5 end_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2008-Apr-30 18:22:56 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2008-Apr-30 18:22:56 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2008-Apr-30 18:22:56 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2008-Apr-30 18:22:56 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-30 18:22:56 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.33338 J 2008-Apr-30 18:22:56 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.7 2008-Apr-30 18:22:56 LOG2 antvel: Parameters to Doppler: Topocentric 80576 2008 121 0.0 2008-Apr-30 18:22:56 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-30 18:22:56 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2008-Apr-30 18:22:56 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2008-Apr-30 18:22:56 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-30 18:22:56 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-30 18:22:56 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Apr-30 18:22:56 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 18:22:56 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-30 18:22:56 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-30 18:22:56 LOG5 begin_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2008-Apr-30 18:22:56 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-30 18:22:56 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.547005 2008.3333769361423 18.999933 2008-Apr-30 18:22:56 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333347 2008-Apr-30 18:22:56 LOG4 log_alfabeam: ALFABEAM 1 9.709422715129200 21.850209707768332 2008-Apr-30 18:22:56 LOG4 log_alfabeam: ALFABEAM 2 9.715130742585343 21.792761913537596 2008-Apr-30 18:22:56 LOG4 log_alfabeam: ALFABEAM 3 9.722381685001880 21.825499609485412 2008-Apr-30 18:22:56 LOG4 log_alfabeam: ALFABEAM 4 9.723910460348947 21.916589898357408 2008-Apr-30 18:22:56 LOG4 log_alfabeam: ALFABEAM 5 9.718170365386428 21.974176377788623 2008-Apr-30 18:22:56 LOG4 log_alfabeam: ALFABEAM 6 9.710933724777879 21.940534168184808 2008-Apr-30 18:22:56 INFO2 take_spectra: Starting WAPP+GALFA scan: 812100076 2008-Apr-30 18:22:57 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-30 18:22:57 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-30 18:22:57 LOG5 begin_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2008-Apr-30 18:22:57 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-30 18:22:57 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Apr-30 18:22:57 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 18:22:57 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:22:57 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:22:57 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80578.00 2008-Apr-30 18:22:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-30 18:22:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:22:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:22:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-30 18:22:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:22:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:22:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:22:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:22:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:23:08 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-30 18:23:08 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-30 18:23:08 LOG5 end_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2008-Apr-30 18:23:08 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-30 18:23:08 LOG5 end_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2008-Apr-30 18:23:08 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2008-Apr-30 18:23:08 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2008-Apr-30 18:23:08 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2008-Apr-30 18:23:08 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-30 18:23:08 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.33338 J 2008-Apr-30 18:23:08 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.7 2008-Apr-30 18:23:08 LOG2 antvel: Parameters to Doppler: Topocentric 80588 2008 121 0.0 2008-Apr-30 18:23:08 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-30 18:23:08 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2008-Apr-30 18:23:08 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2008-Apr-30 18:23:08 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-30 18:23:08 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-30 18:23:08 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Apr-30 18:23:08 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 18:23:08 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-30 18:23:08 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-30 18:23:08 LOG5 begin_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2008-Apr-30 18:23:08 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-30 18:23:08 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.550348 2008.3333773163993 18.999933 2008-Apr-30 18:23:08 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333333 2008-Apr-30 18:23:08 LOG4 log_alfabeam: ALFABEAM 1 9.709424456056349 21.850136175626041 2008-Apr-30 18:23:08 LOG4 log_alfabeam: ALFABEAM 2 9.715135455822127 21.792746681073307 2008-Apr-30 18:23:08 LOG4 log_alfabeam: ALFABEAM 3 9.722384706580245 21.825557027620341 2008-Apr-30 18:23:08 LOG4 log_alfabeam: ALFABEAM 4 9.723908705138932 21.916664018589170 2008-Apr-30 18:23:08 LOG4 log_alfabeam: ALFABEAM 5 9.718165533260766 21.974192074274100 2008-Apr-30 18:23:08 LOG4 log_alfabeam: ALFABEAM 6 9.710930698058062 21.940474867686607 2008-Apr-30 18:23:08 INFO2 take_spectra: Starting WAPP+GALFA scan: 812100077 2008-Apr-30 18:23:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-30 18:23:09 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-30 18:23:09 LOG5 begin_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2008-Apr-30 18:23:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-30 18:23:09 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Apr-30 18:23:09 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 18:23:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:23:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:23:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80590.00 2008-Apr-30 18:23:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-30 18:23:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:23:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:23:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-30 18:23:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:23:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:23:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:23:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:23:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:23:20 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-30 18:23:20 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-30 18:23:20 LOG5 end_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2008-Apr-30 18:23:20 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-30 18:23:20 LOG5 end_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2008-Apr-30 18:23:20 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2008-Apr-30 18:23:20 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-30 18:23:20 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-30 18:23:20 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-30 18:23:20 LOG5 begin_task: Level: (3) ID = <10044> Status = 0 0 0 0 ok 2008-Apr-30 18:23:20 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-30 18:23:20 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-30 18:23:20 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-30 18:23:20 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-30 18:23:20 LOG5 end_task: Level: (3) ID = <10044> Status = 0 0 0 0 ok 2008-Apr-30 18:23:20 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2008-Apr-30 18:23:20 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2008-Apr-30 18:23:20 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2008-Apr-30 18:23:20 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-30 18:23:20 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.33338 J 2008-Apr-30 18:23:20 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.7 2008-Apr-30 18:23:20 LOG2 antvel: Parameters to Doppler: Topocentric 80600 2008 121 0.0 2008-Apr-30 18:23:20 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-30 18:23:20 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2008-Apr-30 18:23:20 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2008-Apr-30 18:23:20 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-30 18:23:20 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-30 18:23:20 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Apr-30 18:23:20 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 18:23:20 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-30 18:23:20 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-30 18:23:20 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2008-Apr-30 18:23:20 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-30 18:23:20 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.553690 2008.3333776966563 18.999933 2008-Apr-30 18:23:20 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666670 21.883333333333336 2008-Apr-30 18:23:20 LOG4 log_alfabeam: ALFABEAM 1 9.709426207741677 21.850062370553495 2008-Apr-30 18:23:20 LOG4 log_alfabeam: ALFABEAM 2 9.715140188449787 21.792731436525521 2008-Apr-30 18:23:20 LOG4 log_alfabeam: ALFABEAM 3 9.722387737107660 21.825614702981810 2008-Apr-30 18:23:20 LOG4 log_alfabeam: ALFABEAM 4 9.723906939036896 21.916738414374347 2008-Apr-30 18:23:20 LOG4 log_alfabeam: ALFABEAM 5 9.718160681112481 21.974207783182862 2008-Apr-30 18:23:20 LOG4 log_alfabeam: ALFABEAM 6 9.710927662530390 21.940415300488933 2008-Apr-30 18:23:20 INFO2 take_spectra: Starting WAPP+GALFA scan: 812100078 2008-Apr-30 18:23:21 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-30 18:23:21 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-30 18:23:21 LOG5 begin_task: Level: (4) ID = <10046> Status = 0 0 0 0 ok 2008-Apr-30 18:23:21 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-30 18:23:21 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Apr-30 18:23:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 18:23:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:23:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:23:21 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80602.00 2008-Apr-30 18:23:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-30 18:23:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:23:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:23:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-30 18:23:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:23:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:23:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:23:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:23:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:23:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.542 > 1.4)! 2008-Apr-30 18:23:23 LOG4 check_wapp_levels: WAPP-1 power levels: 1.374 1.111 1.258 1.226 2008-Apr-30 18:23:23 LOG4 check_wapp_levels: WAPP-2 power levels: 1.396 1.374 1.410 1.518 2008-Apr-30 18:23:23 LOG4 check_wapp_levels: WAPP-3 power levels: 1.372 1.354 1.491 1.242 2008-Apr-30 18:23:23 LOG4 check_wapp_levels: WAPP-4 power levels: 1.418 1.452 1.542 1.290 2008-Apr-30 18:23:25 INFO5 check_wapp_levels: WAPP power levels are between 1.111 and 1.544 (still bad) 2008-Apr-30 18:23:27 INFO5 check_wapp_levels: WAPP power levels are between 1.112 and 1.544 (still bad) 2008-Apr-30 18:23:29 INFO5 check_wapp_levels: WAPP power levels are between 1.116 and 1.542 (still bad) 2008-Apr-30 18:23:31 INFO5 check_wapp_levels: WAPP power levels are between 1.137 and 1.543 (still bad) 2008-Apr-30 18:23:32 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-30 18:23:32 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-30 18:23:32 LOG5 end_task: Level: (4) ID = <10046> Status = 0 0 0 0 ok 2008-Apr-30 18:23:32 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-30 18:23:32 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2008-Apr-30 18:23:32 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2008-Apr-30 18:23:32 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2008-Apr-30 18:23:32 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2008-Apr-30 18:23:32 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-30 18:23:32 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.33338 J 2008-Apr-30 18:23:32 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.7 2008-Apr-30 18:23:32 LOG2 antvel: Parameters to Doppler: Topocentric 80612 2008 121 0.0 2008-Apr-30 18:23:32 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-30 18:23:32 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2008-Apr-30 18:23:32 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2008-Apr-30 18:23:32 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-30 18:23:32 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-30 18:23:32 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Apr-30 18:23:32 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 18:23:32 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-30 18:23:32 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-30 18:23:32 LOG5 begin_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2008-Apr-30 18:23:32 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-30 18:23:32 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.557033 2008.3333780769135 18.999933 2008-Apr-30 18:23:32 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666665 21.883333333333322 2008-Apr-30 18:23:32 LOG4 log_alfabeam: ALFABEAM 1 9.709427971342670 21.849988246096661 2008-Apr-30 18:23:32 LOG4 log_alfabeam: ALFABEAM 2 9.715144943471556 21.792716170864701 2008-Apr-30 18:23:32 LOG4 log_alfabeam: ALFABEAM 3 9.722390778462728 21.825672672440188 2008-Apr-30 18:23:32 LOG4 log_alfabeam: ALFABEAM 4 9.723905160875219 21.916813132539932 2008-Apr-30 18:23:32 LOG4 log_alfabeam: ALFABEAM 5 9.718155805861267 21.974223513810497 2008-Apr-30 18:23:32 LOG4 log_alfabeam: ALFABEAM 6 9.710924616315683 21.940355428509942 2008-Apr-30 18:23:32 INFO2 take_spectra: Starting WAPP+GALFA scan: 812100079 2008-Apr-30 18:23:33 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-30 18:23:33 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-30 18:23:33 LOG5 begin_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2008-Apr-30 18:23:33 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-30 18:23:33 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Apr-30 18:23:33 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 18:23:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:23:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:23:33 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80614.00 2008-Apr-30 18:23:34 INFO5 check_wapp_levels: WAPP power levels are between 1.120 and 1.542 (still bad) 2008-Apr-30 18:23:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-30 18:23:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:23:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:23:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-30 18:23:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:23:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:23:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:23:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:23:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:23:36 INFO5 check_wapp_levels: WAPP power levels are between 1.119 and 1.501 (still bad) 2008-Apr-30 18:23:38 INFO5 check_wapp_levels: WAPP power levels are between 1.121 and 1.502 (still bad) 2008-Apr-30 18:23:40 INFO5 check_wapp_levels: WAPP power levels are between 1.158 and 1.502 (still bad) 2008-Apr-30 18:23:42 INFO5 check_wapp_levels: WAPP power levels are between 1.172 and 1.503 (still bad) 2008-Apr-30 18:23:44 INFO5 check_wapp_levels: WAPP power levels are between 1.200 and 1.502 (still bad) 2008-Apr-30 18:23:44 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-30 18:23:44 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-30 18:23:44 LOG5 end_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2008-Apr-30 18:23:44 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-30 18:23:44 LOG5 end_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2008-Apr-30 18:23:44 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2008-Apr-30 18:23:44 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2008-Apr-30 18:23:44 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2008-Apr-30 18:23:44 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-30 18:23:44 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.33338 J 2008-Apr-30 18:23:44 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.7 2008-Apr-30 18:23:44 LOG2 antvel: Parameters to Doppler: Topocentric 80624 2008 121 0.0 2008-Apr-30 18:23:44 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-30 18:23:44 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2008-Apr-30 18:23:44 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2008-Apr-30 18:23:44 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-30 18:23:44 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-30 18:23:44 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Apr-30 18:23:44 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 18:23:44 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-30 18:23:44 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-30 18:23:44 LOG5 begin_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2008-Apr-30 18:23:44 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-30 18:23:44 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.560375 2008.3333784571705 18.999933 2008-Apr-30 18:23:44 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333336 2008-Apr-30 18:23:44 LOG4 log_alfabeam: ALFABEAM 1 9.709429745914774 21.849913844294090 2008-Apr-30 18:23:44 LOG4 log_alfabeam: ALFABEAM 2 9.715149718215432 21.792700893321058 2008-Apr-30 18:23:44 LOG4 log_alfabeam: ALFABEAM 3 9.722393828891375 21.825730903694659 2008-Apr-30 18:23:44 LOG4 log_alfabeam: ALFABEAM 4 9.723903371605646 21.916888130711726 2008-Apr-30 18:23:44 LOG4 log_alfabeam: ALFABEAM 5 9.718150910245443 21.974239256636587 2008-Apr-30 18:23:44 LOG4 log_alfabeam: ALFABEAM 6 9.710921561173386 21.940295285108505 2008-Apr-30 18:23:44 INFO2 take_spectra: Starting WAPP+GALFA scan: 812100080 2008-Apr-30 18:23:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-30 18:23:45 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-30 18:23:45 LOG5 begin_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2008-Apr-30 18:23:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-30 18:23:45 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Apr-30 18:23:45 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 18:23:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:23:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:23:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80626.00 2008-Apr-30 18:23:46 INFO5 check_wapp_levels: WAPP power levels are between 1.201 and 1.501 (still bad) 2008-Apr-30 18:23:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-30 18:23:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:23:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:23:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-30 18:23:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:23:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:23:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:23:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:23:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:23:48 INFO5 check_wapp_levels: WAPP power levels are between 1.198 and 1.499 (still bad) 2008-Apr-30 18:23:50 INFO5 check_wapp_levels: WAPP power levels are between 1.192 and 1.501 (still bad) 2008-Apr-30 18:23:52 INFO5 check_wapp_levels: WAPP power levels are between 1.193 and 1.501 (still bad) 2008-Apr-30 18:23:54 INFO5 check_wapp_levels: WAPP power levels are between 1.197 and 1.499 (still bad) 2008-Apr-30 18:23:56 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-30 18:23:56 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-30 18:23:56 LOG5 end_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2008-Apr-30 18:23:56 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-30 18:23:56 LOG5 end_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2008-Apr-30 18:23:56 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2008-Apr-30 18:23:56 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2008-Apr-30 18:23:56 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2008-Apr-30 18:23:56 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-30 18:23:56 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.33338 J 2008-Apr-30 18:23:56 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.7 2008-Apr-30 18:23:56 LOG2 antvel: Parameters to Doppler: Topocentric 80636 2008 121 0.0 2008-Apr-30 18:23:56 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-30 18:23:56 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2008-Apr-30 18:23:56 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2008-Apr-30 18:23:56 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-30 18:23:56 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-30 18:23:56 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Apr-30 18:23:56 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 18:23:56 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-30 18:23:56 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-30 18:23:56 LOG5 begin_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2008-Apr-30 18:23:56 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-30 18:23:56 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.563718 2008.3333788374275 18.999933 2008-Apr-30 18:23:56 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333347 2008-Apr-30 18:23:56 LOG4 log_alfabeam: ALFABEAM 1 9.709431532631939 21.849839118289019 2008-Apr-30 18:23:56 LOG4 log_alfabeam: ALFABEAM 2 9.715154515713527 21.792685594853175 2008-Apr-30 18:23:56 LOG4 log_alfabeam: ALFABEAM 3 9.722396890285113 21.825789434001258 2008-Apr-30 18:23:56 LOG4 log_alfabeam: ALFABEAM 4 9.723901570043878 21.916963456123064 2008-Apr-30 18:23:56 LOG4 log_alfabeam: ALFABEAM 5 9.718145991154906 21.974255020968545 2008-Apr-30 18:23:56 LOG4 log_alfabeam: ALFABEAM 6 9.710918495211661 21.940234831803242 2008-Apr-30 18:23:56 INFO2 take_spectra: Starting WAPP+GALFA scan: 812100081 2008-Apr-30 18:23:57 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-30 18:23:57 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-30 18:23:57 LOG5 begin_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2008-Apr-30 18:23:57 INFO5 check_wapp_levels: WAPP power levels are between 1.198 and 1.499 (still bad) 2008-Apr-30 18:23:57 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-30 18:23:57 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Apr-30 18:23:57 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 18:23:57 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:23:57 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:23:57 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80638.00 2008-Apr-30 18:23:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-30 18:23:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:23:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:23:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-30 18:23:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:23:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:23:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:23:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:23:59 INFO5 check_wapp_levels: WAPP power levels are between 1.198 and 1.500 (still bad) 2008-Apr-30 18:23:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:24:01 INFO5 check_wapp_levels: WAPP power levels are between 1.192 and 1.497 (still bad) 2008-Apr-30 18:24:03 INFO5 check_wapp_levels: WAPP power levels are between 1.191 and 1.497 (still bad) 2008-Apr-30 18:24:05 INFO5 check_wapp_levels: WAPP power levels are between 1.191 and 1.498 (still bad) 2008-Apr-30 18:24:07 INFO5 check_wapp_levels: WAPP power levels are between 1.191 and 1.497 (still bad) 2008-Apr-30 18:24:08 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-30 18:24:08 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-30 18:24:08 LOG5 end_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2008-Apr-30 18:24:08 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-30 18:24:08 LOG5 end_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2008-Apr-30 18:24:08 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2008-Apr-30 18:24:08 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2008-Apr-30 18:24:08 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2008-Apr-30 18:24:08 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-30 18:24:08 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.33338 J 2008-Apr-30 18:24:08 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.7 2008-Apr-30 18:24:08 LOG2 antvel: Parameters to Doppler: Topocentric 80648 2008 121 0.0 2008-Apr-30 18:24:08 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-30 18:24:08 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2008-Apr-30 18:24:08 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2008-Apr-30 18:24:08 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-30 18:24:08 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-30 18:24:08 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Apr-30 18:24:08 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 18:24:08 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-30 18:24:08 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-30 18:24:08 LOG5 begin_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2008-Apr-30 18:24:08 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-30 18:24:08 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.567060 2008.3333792176845 18.999826 2008-Apr-30 18:24:08 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333340 2008-Apr-30 18:24:08 LOG4 log_alfabeam: ALFABEAM 1 9.709433335106345 21.849763951889663 2008-Apr-30 18:24:08 LOG4 log_alfabeam: ALFABEAM 2 9.715159347243244 21.792670258512320 2008-Apr-30 18:24:08 LOG4 log_alfabeam: ALFABEAM 3 9.722399970320472 21.825848364797690 2008-Apr-30 18:24:08 LOG4 log_alfabeam: ALFABEAM 4 9.723899752552720 21.917039226608225 2008-Apr-30 18:24:08 LOG4 log_alfabeam: ALFABEAM 5 9.718141037341086 21.974270821779811 2008-Apr-30 18:24:08 LOG4 log_alfabeam: ALFABEAM 6 9.710915410829763 21.940173967927759 2008-Apr-30 18:24:08 INFO2 take_spectra: Starting WAPP+GALFA scan: 812100082 2008-Apr-30 18:24:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-30 18:24:09 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-30 18:24:09 LOG5 begin_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2008-Apr-30 18:24:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-30 18:24:09 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Apr-30 18:24:09 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 18:24:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:24:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:24:09 INFO5 check_wapp_levels: WAPP power levels are between 1.191 and 1.497 (still bad) 2008-Apr-30 18:24:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80650.00 2008-Apr-30 18:24:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-30 18:24:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:24:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:24:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-30 18:24:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:24:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:24:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:24:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:24:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:24:11 INFO5 check_wapp_levels: WAPP power levels are between 1.186 and 1.501 (still bad) 2008-Apr-30 18:24:13 INFO5 check_wapp_levels: WAPP power levels are between 1.187 and 1.501 (still bad) 2008-Apr-30 18:24:15 INFO5 check_wapp_levels: WAPP power levels are between 1.174 and 1.499 (still bad) 2008-Apr-30 18:24:17 INFO5 check_wapp_levels: WAPP power levels are between 1.173 and 1.501 (still bad) 2008-Apr-30 18:24:19 INFO5 check_wapp_levels: WAPP power levels are between 1.168 and 1.500 (still bad) 2008-Apr-30 18:24:20 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-30 18:24:20 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-30 18:24:20 LOG5 end_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2008-Apr-30 18:24:20 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-30 18:24:20 LOG5 end_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2008-Apr-30 18:24:20 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2008-Apr-30 18:24:20 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2008-Apr-30 18:24:20 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2008-Apr-30 18:24:20 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-30 18:24:20 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.33338 J 2008-Apr-30 18:24:20 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.7 2008-Apr-30 18:24:20 LOG2 antvel: Parameters to Doppler: Topocentric 80660 2008 121 0.0 2008-Apr-30 18:24:20 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-30 18:24:20 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2008-Apr-30 18:24:20 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2008-Apr-30 18:24:20 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-30 18:24:20 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-30 18:24:20 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Apr-30 18:24:20 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 18:24:20 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-30 18:24:20 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-30 18:24:20 LOG5 begin_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2008-Apr-30 18:24:20 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-30 18:24:20 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.570402 2008.3333795979415 18.999933 2008-Apr-30 18:24:20 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666670 21.883333333333333 2008-Apr-30 18:24:20 LOG4 log_alfabeam: ALFABEAM 1 9.709435140282176 21.849688796043964 2008-Apr-30 18:24:20 LOG4 log_alfabeam: ALFABEAM 2 9.715164172501570 21.792654958453927 2008-Apr-30 18:24:20 LOG4 log_alfabeam: ALFABEAM 3 9.722403041653861 21.825907313950456 2008-Apr-30 18:24:20 LOG4 log_alfabeam: ALFABEAM 4 9.723897932278987 21.917114985474605 2008-Apr-30 18:24:20 LOG4 log_alfabeam: ALFABEAM 5 9.718136089179497 21.974286590092664 2008-Apr-30 18:24:20 LOG4 log_alfabeam: ALFABEAM 6 9.710912335160929 21.940113075851450 2008-Apr-30 18:24:20 INFO2 take_spectra: Starting WAPP+GALFA scan: 812100083 2008-Apr-30 18:24:21 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-30 18:24:21 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-30 18:24:21 LOG5 begin_task: Level: (4) ID = <10056> Status = 0 0 0 0 ok 2008-Apr-30 18:24:21 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-30 18:24:21 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Apr-30 18:24:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 18:24:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:24:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:24:21 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80662.00 2008-Apr-30 18:24:22 INFO5 check_wapp_levels: WAPP power levels are between 1.176 and 1.501 (still bad) 2008-Apr-30 18:24:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-30 18:24:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:24:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:24:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-30 18:24:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:24:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:24:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:24:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:24:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:24:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.505 > 1.4)! 2008-Apr-30 18:24:24 LOG4 check_wapp_levels: WAPP-1 power levels: 1.307 1.194 1.190 1.199 2008-Apr-30 18:24:24 LOG4 check_wapp_levels: WAPP-2 power levels: 1.363 1.327 1.315 1.470 2008-Apr-30 18:24:24 LOG4 check_wapp_levels: WAPP-3 power levels: 1.295 1.307 1.377 1.185 2008-Apr-30 18:24:24 LOG4 check_wapp_levels: WAPP-4 power levels: 1.385 1.409 1.505 1.253 2008-Apr-30 18:24:26 INFO5 check_wapp_levels: WAPP power levels are between 1.185 and 1.505 (still bad) 2008-Apr-30 18:24:28 INFO5 check_wapp_levels: WAPP power levels are between 1.183 and 1.505 (still bad) 2008-Apr-30 18:24:30 INFO5 check_wapp_levels: WAPP power levels are between 1.183 and 1.503 (still bad) 2008-Apr-30 18:24:32 INFO5 check_wapp_levels: WAPP power levels are between 1.161 and 1.502 (still bad) 2008-Apr-30 18:24:32 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-30 18:24:32 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-30 18:24:32 LOG5 end_task: Level: (4) ID = <10056> Status = 0 0 0 0 ok 2008-Apr-30 18:24:32 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-30 18:24:32 LOG5 end_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2008-Apr-30 18:24:32 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2008-Apr-30 18:24:32 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2008-Apr-30 18:24:32 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2008-Apr-30 18:24:32 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-30 18:24:32 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.33338 J 2008-Apr-30 18:24:32 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.7 2008-Apr-30 18:24:32 LOG2 antvel: Parameters to Doppler: Topocentric 80672 2008 121 0.0 2008-Apr-30 18:24:32 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-30 18:24:32 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2008-Apr-30 18:24:32 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2008-Apr-30 18:24:32 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-30 18:24:32 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-30 18:24:32 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Apr-30 18:24:32 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 18:24:32 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-30 18:24:32 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-30 18:24:32 LOG5 begin_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2008-Apr-30 18:24:32 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-30 18:24:32 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.573745 2008.3333799781988 18.999933 2008-Apr-30 18:24:32 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666670 21.883333333333336 2008-Apr-30 18:24:32 LOG4 log_alfabeam: ALFABEAM 1 9.709436962525814 21.849613150044732 2008-Apr-30 18:24:32 LOG4 log_alfabeam: ALFABEAM 2 9.715169035039857 21.792639611578867 2008-Apr-30 18:24:32 LOG4 log_alfabeam: ALFABEAM 3 9.722406133603991 21.825966703817823 2008-Apr-30 18:24:32 LOG4 log_alfabeam: ALFABEAM 4 9.723896094753075 21.917191239575544 2008-Apr-30 18:24:32 LOG4 log_alfabeam: ALFABEAM 5 9.718131102961285 21.974302404081179 2008-Apr-30 18:24:32 LOG4 log_alfabeam: ALFABEAM 6 9.710909239099408 21.940051731654350 2008-Apr-30 18:24:32 INFO2 take_spectra: Starting WAPP+GALFA scan: 812100084 2008-Apr-30 18:24:33 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-30 18:24:33 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-30 18:24:33 LOG5 begin_task: Level: (4) ID = <10058> Status = 0 0 0 0 ok 2008-Apr-30 18:24:33 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-30 18:24:33 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Apr-30 18:24:33 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 18:24:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:24:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:24:33 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80674.00 2008-Apr-30 18:24:34 INFO5 check_wapp_levels: WAPP power levels are between 1.161 and 1.502 (still bad) 2008-Apr-30 18:24:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-30 18:24:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:24:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:24:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-30 18:24:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:24:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:24:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:24:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:24:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:24:36 INFO5 check_wapp_levels: WAPP power levels are between 1.183 and 1.511 (still bad) 2008-Apr-30 18:24:38 INFO5 check_wapp_levels: WAPP power levels are between 1.181 and 1.512 (still bad) 2008-Apr-30 18:24:40 INFO5 check_wapp_levels: WAPP power levels are between 1.051 and 1.511 (still bad) 2008-Apr-30 18:24:42 INFO5 check_wapp_levels: WAPP power levels are between 1.057 and 1.512 (still bad) 2008-Apr-30 18:24:44 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-30 18:24:44 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-30 18:24:44 LOG5 end_task: Level: (4) ID = <10058> Status = 0 0 0 0 ok 2008-Apr-30 18:24:44 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-30 18:24:44 LOG5 end_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2008-Apr-30 18:24:44 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2008-Apr-30 18:24:44 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2008-Apr-30 18:24:44 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2008-Apr-30 18:24:44 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-30 18:24:44 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-30 18:24:44 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-30 18:24:44 LOG5 begin_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2008-Apr-30 18:24:44 INFO5 check_wapp_levels: WAPP power levels are between 1.057 and 1.511 (still bad) 2008-Apr-30 18:24:44 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-30 18:24:44 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-30 18:24:44 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-30 18:24:44 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-30 18:24:44 LOG5 end_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2008-Apr-30 18:24:44 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2008-Apr-30 18:24:44 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2008-Apr-30 18:24:44 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2008-Apr-30 18:24:44 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2008-Apr-30 18:24:44 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-30 18:24:44 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.33338 J 2008-Apr-30 18:24:44 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.7 2008-Apr-30 18:24:44 LOG2 antvel: Parameters to Doppler: Topocentric 80684 2008 121 0.0 2008-Apr-30 18:24:44 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-30 18:24:44 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2008-Apr-30 18:24:44 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2008-Apr-30 18:24:44 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-30 18:24:44 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-30 18:24:44 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Apr-30 18:24:44 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 18:24:44 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-30 18:24:44 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-30 18:24:44 LOG5 begin_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2008-Apr-30 18:24:44 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-30 18:24:44 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.577087 2008.3333803584558 18.999933 2008-Apr-30 18:24:44 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333333 2008-Apr-30 18:24:44 LOG4 log_alfabeam: ALFABEAM 1 9.709438796297029 21.849537215267407 2008-Apr-30 18:24:44 LOG4 log_alfabeam: ALFABEAM 2 9.715173918160190 21.792624253393338 2008-Apr-30 18:24:44 LOG4 log_alfabeam: ALFABEAM 3 9.722409234947431 21.826026367366353 2008-Apr-30 18:24:44 LOG4 log_alfabeam: ALFABEAM 4 9.723894245555066 21.917267785210939 2008-Apr-30 18:24:44 LOG4 log_alfabeam: ALFABEAM 5 9.718126095490629 21.974318229629802 2008-Apr-30 18:24:44 LOG4 log_alfabeam: ALFABEAM 6 9.710906133803242 21.939990103752141 2008-Apr-30 18:24:44 INFO2 take_spectra: Starting WAPP+GALFA scan: 812100085 2008-Apr-30 18:24:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-30 18:24:45 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-30 18:24:45 LOG5 begin_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2008-Apr-30 18:24:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-30 18:24:45 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Apr-30 18:24:45 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 18:24:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:24:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:24:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80686.00 2008-Apr-30 18:24:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-30 18:24:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:24:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:24:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-30 18:24:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:24:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:24:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:24:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:24:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:24:47 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.860 and 1.127 2008-Apr-30 18:24:56 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-30 18:24:56 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-30 18:24:56 LOG5 end_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2008-Apr-30 18:24:56 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-30 18:24:56 LOG5 end_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2008-Apr-30 18:24:56 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2008-Apr-30 18:24:56 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2008-Apr-30 18:24:56 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2008-Apr-30 18:24:56 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-30 18:24:56 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.33338 J 2008-Apr-30 18:24:56 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.7 2008-Apr-30 18:24:56 LOG2 antvel: Parameters to Doppler: Topocentric 80696 2008 121 0.0 2008-Apr-30 18:24:56 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-30 18:24:56 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2008-Apr-30 18:24:56 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2008-Apr-30 18:24:56 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-30 18:24:56 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-30 18:24:56 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Apr-30 18:24:56 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 18:24:56 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-30 18:24:56 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-30 18:24:56 LOG5 begin_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2008-Apr-30 18:24:56 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-30 18:24:56 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.580430 2008.3333807387128 18.999933 2008-Apr-30 18:24:56 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333347 2008-Apr-30 18:24:56 LOG4 log_alfabeam: ALFABEAM 1 9.709440642812494 21.849460943819007 2008-Apr-30 18:24:56 LOG4 log_alfabeam: ALFABEAM 2 9.715178824969158 21.792608874829000 2008-Apr-30 18:24:56 LOG4 log_alfabeam: ALFABEAM 3 9.722412347608694 21.826086342848683 2008-Apr-30 18:24:56 LOG4 log_alfabeam: ALFABEAM 4 9.723892383457402 21.917344670659983 2008-Apr-30 18:24:56 LOG4 log_alfabeam: ALFABEAM 5 9.718121063580545 21.974334076072481 2008-Apr-30 18:24:56 LOG4 log_alfabeam: ALFABEAM 6 9.710903017348265 21.939928152631555 2008-Apr-30 18:24:56 INFO2 take_spectra: Starting WAPP+GALFA scan: 812100086 2008-Apr-30 18:24:57 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-30 18:24:57 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-30 18:24:57 LOG5 begin_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2008-Apr-30 18:24:57 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-30 18:24:57 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Apr-30 18:24:57 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 18:24:57 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:24:57 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:24:57 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80698.00 2008-Apr-30 18:24:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-30 18:24:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:24:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:24:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-30 18:24:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:24:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:24:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:24:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:24:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:25:08 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-30 18:25:08 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-30 18:25:08 LOG5 end_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2008-Apr-30 18:25:08 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-30 18:25:08 LOG5 end_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2008-Apr-30 18:25:08 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2008-Apr-30 18:25:08 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2008-Apr-30 18:25:08 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2008-Apr-30 18:25:08 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-30 18:25:08 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.33338 J 2008-Apr-30 18:25:08 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.7 2008-Apr-30 18:25:08 LOG2 antvel: Parameters to Doppler: Topocentric 80708 2008 121 0.0 2008-Apr-30 18:25:08 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-30 18:25:08 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2008-Apr-30 18:25:08 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2008-Apr-30 18:25:08 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-30 18:25:08 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-30 18:25:08 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Apr-30 18:25:08 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 18:25:08 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-30 18:25:08 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-30 18:25:08 LOG5 begin_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2008-Apr-30 18:25:08 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-30 18:25:08 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.583772 2008.3333811189698 18.999933 2008-Apr-30 18:25:08 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333347 2008-Apr-30 18:25:08 LOG4 log_alfabeam: ALFABEAM 1 9.709442501088244 21.849384378856101 2008-Apr-30 18:25:08 LOG4 log_alfabeam: ALFABEAM 2 9.715183752717426 21.792593485213448 2008-Apr-30 18:25:08 LOG4 log_alfabeam: ALFABEAM 3 9.722415469794603 21.826146596958893 2008-Apr-30 18:25:08 LOG4 log_alfabeam: ALFABEAM 4 9.723890509451691 21.917421852419420 2008-Apr-30 18:25:08 LOG4 log_alfabeam: ALFABEAM 5 9.718116010049179 21.974349933787241 2008-Apr-30 18:25:08 LOG4 log_alfabeam: ALFABEAM 6 9.710899891532684 21.939865912694398 2008-Apr-30 18:25:08 INFO2 take_spectra: Starting WAPP+GALFA scan: 812100087 2008-Apr-30 18:25:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-30 18:25:09 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-30 18:25:09 LOG5 begin_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2008-Apr-30 18:25:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-30 18:25:09 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Apr-30 18:25:09 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 18:25:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:25:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:25:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80710.00 2008-Apr-30 18:25:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-30 18:25:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:25:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:25:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-30 18:25:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:25:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:25:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:25:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:25:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:25:20 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-30 18:25:20 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-30 18:25:20 LOG5 end_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2008-Apr-30 18:25:20 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-30 18:25:20 LOG5 end_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2008-Apr-30 18:25:20 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2008-Apr-30 18:25:20 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2008-Apr-30 18:25:20 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2008-Apr-30 18:25:20 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-30 18:25:20 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.33338 J 2008-Apr-30 18:25:20 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.7 2008-Apr-30 18:25:20 LOG2 antvel: Parameters to Doppler: Topocentric 80720 2008 121 0.0 2008-Apr-30 18:25:20 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-30 18:25:20 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2008-Apr-30 18:25:20 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2008-Apr-30 18:25:20 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-30 18:25:20 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-30 18:25:20 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Apr-30 18:25:20 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 18:25:20 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-30 18:25:20 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-30 18:25:20 LOG5 begin_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2008-Apr-30 18:25:20 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-30 18:25:20 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.587115 2008.3333814992268 18.999933 2008-Apr-30 18:25:20 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333329 2008-Apr-30 18:25:20 LOG4 log_alfabeam: ALFABEAM 1 9.709444372358695 21.849307472058907 2008-Apr-30 18:25:20 LOG4 log_alfabeam: ALFABEAM 2 9.715188704542314 21.792578075468747 2008-Apr-30 18:25:20 LOG4 log_alfabeam: ALFABEAM 3 9.722418603443186 21.826207168361488 2008-Apr-30 18:25:20 LOG4 log_alfabeam: ALFABEAM 4 9.723888622292405 21.917499379199043 2008-Apr-30 18:25:20 LOG4 log_alfabeam: ALFABEAM 5 9.718110931677831 21.974365812117309 2008-Apr-30 18:25:20 LOG4 log_alfabeam: ALFABEAM 6 9.710896754419107 21.939803344000858 2008-Apr-30 18:25:20 INFO2 take_spectra: Starting WAPP+GALFA scan: 812100088 2008-Apr-30 18:25:21 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-30 18:25:21 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-30 18:25:21 LOG5 begin_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2008-Apr-30 18:25:21 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-30 18:25:21 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Apr-30 18:25:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 18:25:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:25:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:25:21 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80722.00 2008-Apr-30 18:25:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-30 18:25:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:25:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:25:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-30 18:25:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:25:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:25:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:25:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:25:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:25:32 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-30 18:25:32 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-30 18:25:32 LOG5 end_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2008-Apr-30 18:25:32 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-30 18:25:32 LOG5 end_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2008-Apr-30 18:25:32 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2008-Apr-30 18:25:32 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2008-Apr-30 18:25:32 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2008-Apr-30 18:25:32 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-30 18:25:32 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.33338 J 2008-Apr-30 18:25:32 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.7 2008-Apr-30 18:25:32 LOG2 antvel: Parameters to Doppler: Topocentric 80732 2008 121 0.0 2008-Apr-30 18:25:32 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-30 18:25:32 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2008-Apr-30 18:25:32 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2008-Apr-30 18:25:32 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-30 18:25:32 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-30 18:25:32 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Apr-30 18:25:32 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 18:25:32 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-30 18:25:32 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-30 18:25:32 LOG5 begin_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2008-Apr-30 18:25:32 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-30 18:25:32 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.590457 2008.333381879484 18.999933 2008-Apr-30 18:25:32 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333333 2008-Apr-30 18:25:32 LOG4 log_alfabeam: ALFABEAM 1 9.709446255628190 21.849230266914045 2008-Apr-30 18:25:32 LOG4 log_alfabeam: ALFABEAM 2 9.715193677671635 21.792562654950665 2008-Apr-30 18:25:32 LOG4 log_alfabeam: ALFABEAM 3 9.722421746749749 21.826268023453380 2008-Apr-30 18:25:32 LOG4 log_alfabeam: ALFABEAM 4 9.723886722982982 21.917577207162513 2008-Apr-30 18:25:32 LOG4 log_alfabeam: ALFABEAM 5 9.718105831308222 21.974381701411506 2008-Apr-30 18:25:32 LOG4 log_alfabeam: ALFABEAM 6 9.710893607817141 21.939740481261282 2008-Apr-30 18:25:32 INFO2 take_spectra: Starting WAPP+GALFA scan: 812100089 2008-Apr-30 18:25:33 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-30 18:25:33 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-30 18:25:33 LOG5 begin_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2008-Apr-30 18:25:33 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-30 18:25:33 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Apr-30 18:25:33 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 18:25:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:25:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:25:33 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80734.00 2008-Apr-30 18:25:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-30 18:25:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:25:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:25:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-30 18:25:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:25:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:25:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:25:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:25:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:25:44 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-30 18:25:44 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-30 18:25:44 LOG5 end_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2008-Apr-30 18:25:44 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-30 18:25:44 LOG5 end_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2008-Apr-30 18:25:44 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2008-Apr-30 18:25:44 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2008-Apr-30 18:25:44 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2008-Apr-30 18:25:44 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-30 18:25:44 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.33338 J 2008-Apr-30 18:25:44 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.7 2008-Apr-30 18:25:44 LOG2 antvel: Parameters to Doppler: Topocentric 80744 2008 121 0.0 2008-Apr-30 18:25:44 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-30 18:25:44 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2008-Apr-30 18:25:44 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2008-Apr-30 18:25:44 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-30 18:25:44 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-30 18:25:44 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Apr-30 18:25:44 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 18:25:44 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-30 18:25:44 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-30 18:25:44 LOG5 begin_task: Level: (3) ID = <10070> Status = 0 0 0 0 ok 2008-Apr-30 18:25:44 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-30 18:25:44 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.593800 2008.333382259741 18.999933 2008-Apr-30 18:25:44 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333336 2008-Apr-30 18:25:44 LOG4 log_alfabeam: ALFABEAM 1 9.709448152149280 21.849152714667788 2008-Apr-30 18:25:44 LOG4 log_alfabeam: ALFABEAM 2 9.715198675274010 21.792547214572455 2008-Apr-30 18:25:44 LOG4 log_alfabeam: ALFABEAM 3 9.722424901666018 21.826329201318817 2008-Apr-30 18:25:44 LOG4 log_alfabeam: ALFABEAM 4 9.723884810259531 21.917655385457451 2008-Apr-30 18:25:44 LOG4 log_alfabeam: ALFABEAM 5 9.718100705689356 21.974397611021505 2008-Apr-30 18:25:44 LOG4 log_alfabeam: ALFABEAM 6 9.710890449776000 21.939677284101151 2008-Apr-30 18:25:44 INFO2 take_spectra: Starting WAPP+GALFA scan: 812100090 2008-Apr-30 18:25:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-30 18:25:45 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-30 18:25:45 LOG5 begin_task: Level: (4) ID = <10071> Status = 0 0 0 0 ok 2008-Apr-30 18:25:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-30 18:25:45 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Apr-30 18:25:45 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 18:25:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:25:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:25:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80746.00 2008-Apr-30 18:25:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-30 18:25:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:25:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:25:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-30 18:25:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:25:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:25:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:25:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:25:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:25:56 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-30 18:25:56 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-30 18:25:56 LOG5 end_task: Level: (4) ID = <10071> Status = 0 0 0 0 ok 2008-Apr-30 18:25:56 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-30 18:25:56 LOG5 end_task: Level: (3) ID = <10070> Status = 0 0 0 0 ok 2008-Apr-30 18:25:56 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2008-Apr-30 18:25:56 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2008-Apr-30 18:25:56 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2008-Apr-30 18:25:56 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-30 18:25:56 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.33338 J 2008-Apr-30 18:25:56 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.7 2008-Apr-30 18:25:56 LOG2 antvel: Parameters to Doppler: Topocentric 80756 2008 121 0.0 2008-Apr-30 18:25:56 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-30 18:25:56 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2008-Apr-30 18:25:56 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2008-Apr-30 18:25:56 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-30 18:25:56 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-30 18:25:56 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Apr-30 18:25:56 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 18:25:56 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-30 18:25:56 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-30 18:25:56 LOG5 begin_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2008-Apr-30 18:25:56 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-30 18:25:56 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.597142 2008.333382639998 18.999933 2008-Apr-30 18:25:56 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333336 2008-Apr-30 18:25:56 LOG4 log_alfabeam: ALFABEAM 1 9.709450060914422 21.849074859141428 2008-Apr-30 18:25:56 LOG4 log_alfabeam: ALFABEAM 2 9.715203694554056 21.792531763718060 2008-Apr-30 18:25:56 LOG4 log_alfabeam: ALFABEAM 3 9.722428066375638 21.826390668052785 2008-Apr-30 18:25:56 LOG4 log_alfabeam: ALFABEAM 4 9.723882885137515 21.917733869909444 2008-Apr-30 18:25:56 LOG4 log_alfabeam: ALFABEAM 5 9.718095557686894 21.974413531266674 2008-Apr-30 18:25:56 LOG4 log_alfabeam: ALFABEAM 6 9.710887282116847 21.939613787544058 2008-Apr-30 18:25:56 INFO2 take_spectra: Starting WAPP+GALFA scan: 812100091 2008-Apr-30 18:25:57 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-30 18:25:57 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-30 18:25:57 LOG5 begin_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2008-Apr-30 18:25:57 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-30 18:25:57 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Apr-30 18:25:57 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 18:25:57 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:25:57 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:25:57 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80758.00 2008-Apr-30 18:25:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-30 18:25:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:25:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:25:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-30 18:25:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:25:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:25:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:25:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:25:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:26:08 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-30 18:26:08 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-30 18:26:08 LOG5 end_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2008-Apr-30 18:26:08 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-30 18:26:08 LOG5 end_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2008-Apr-30 18:26:08 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2008-Apr-30 18:26:08 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-30 18:26:08 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-30 18:26:08 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-30 18:26:08 LOG5 begin_task: Level: (3) ID = <10074> Status = 0 0 0 0 ok 2008-Apr-30 18:26:08 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-30 18:26:08 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-30 18:26:08 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-30 18:26:08 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-30 18:26:08 LOG5 end_task: Level: (3) ID = <10074> Status = 0 0 0 0 ok 2008-Apr-30 18:26:08 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2008-Apr-30 18:26:08 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2008-Apr-30 18:26:08 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2008-Apr-30 18:26:08 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-30 18:26:08 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.33338 J 2008-Apr-30 18:26:08 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.7 2008-Apr-30 18:26:08 LOG2 antvel: Parameters to Doppler: Topocentric 80768 2008 121 0.0 2008-Apr-30 18:26:08 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-30 18:26:08 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2008-Apr-30 18:26:08 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2008-Apr-30 18:26:08 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-30 18:26:08 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-30 18:26:08 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Apr-30 18:26:08 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 18:26:08 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-30 18:26:08 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-30 18:26:08 LOG5 begin_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2008-Apr-30 18:26:08 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-30 18:26:08 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.600485 2008.333383020255 18.999933 2008-Apr-30 18:26:08 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333347 2008-Apr-30 18:26:08 LOG4 log_alfabeam: ALFABEAM 1 9.709451983194684 21.848996651140045 2008-Apr-30 18:26:08 LOG4 log_alfabeam: ALFABEAM 2 9.715208738712247 21.792516293292771 2008-Apr-30 18:26:08 LOG4 log_alfabeam: ALFABEAM 3 9.722431242844207 21.826452463167520 2008-Apr-30 18:26:08 LOG4 log_alfabeam: ALFABEAM 4 9.723880946334278 21.917812710111466 2008-Apr-30 18:26:08 LOG4 log_alfabeam: ALFABEAM 5 9.718090384016950 21.974429471506362 2008-Apr-30 18:26:08 LOG4 log_alfabeam: ALFABEAM 6 9.710884102875319 21.939549950772559 2008-Apr-30 18:26:08 INFO2 take_spectra: Starting WAPP+GALFA scan: 812100092 2008-Apr-30 18:26:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-30 18:26:09 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-30 18:26:09 LOG5 begin_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2008-Apr-30 18:26:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-30 18:26:09 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Apr-30 18:26:09 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 18:26:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:26:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:26:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80770.00 2008-Apr-30 18:26:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-30 18:26:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:26:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:26:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-30 18:26:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:26:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:26:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:26:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:26:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:26:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.535 > 1.4)! 2008-Apr-30 18:26:12 LOG4 check_wapp_levels: WAPP-1 power levels: 1.361 1.467 1.250 1.214 2008-Apr-30 18:26:12 LOG4 check_wapp_levels: WAPP-2 power levels: 1.379 1.362 1.389 1.494 2008-Apr-30 18:26:12 LOG4 check_wapp_levels: WAPP-3 power levels: 1.346 1.332 1.468 1.222 2008-Apr-30 18:26:12 LOG4 check_wapp_levels: WAPP-4 power levels: 1.409 1.436 1.535 1.275 2008-Apr-30 18:26:14 INFO5 check_wapp_levels: WAPP power levels are between 1.215 and 1.533 (still bad) 2008-Apr-30 18:26:16 INFO5 check_wapp_levels: WAPP power levels are between 1.214 and 1.535 (still bad) 2008-Apr-30 18:26:18 INFO5 check_wapp_levels: WAPP power levels are between 1.217 and 1.532 (still bad) 2008-Apr-30 18:26:20 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-30 18:26:20 INFO5 check_wapp_levels: WAPP power levels are between 1.216 and 1.534 (still bad) 2008-Apr-30 18:26:20 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-30 18:26:20 LOG5 end_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2008-Apr-30 18:26:20 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-30 18:26:20 LOG5 end_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2008-Apr-30 18:26:20 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2008-Apr-30 18:26:20 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2008-Apr-30 18:26:20 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2008-Apr-30 18:26:20 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-30 18:26:20 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.33338 J 2008-Apr-30 18:26:20 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.7 2008-Apr-30 18:26:20 LOG2 antvel: Parameters to Doppler: Topocentric 80780 2008 121 0.0 2008-Apr-30 18:26:20 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-30 18:26:20 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2008-Apr-30 18:26:20 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2008-Apr-30 18:26:20 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-30 18:26:20 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-30 18:26:20 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Apr-30 18:26:20 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 18:26:20 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-30 18:26:20 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-30 18:26:20 LOG5 begin_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2008-Apr-30 18:26:20 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-30 18:26:20 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.603827 2008.3333834005123 18.999933 2008-Apr-30 18:26:20 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333333 2008-Apr-30 18:26:20 LOG4 log_alfabeam: ALFABEAM 1 9.709453917970439 21.848918134824498 2008-Apr-30 18:26:20 LOG4 log_alfabeam: ALFABEAM 2 9.715213804929663 21.792500812708855 2008-Apr-30 18:26:20 LOG4 log_alfabeam: ALFABEAM 3 9.722434429243565 21.826514552451343 2008-Apr-30 18:26:20 LOG4 log_alfabeam: ALFABEAM 4 9.723878994877509 21.917891861546146 2008-Apr-30 18:26:20 LOG4 log_alfabeam: ALFABEAM 5 9.718085187569491 21.974445422030389 2008-Apr-30 18:26:20 LOG4 log_alfabeam: ALFABEAM 6 9.710880913884287 21.939485809128296 2008-Apr-30 18:26:20 INFO2 take_spectra: Starting WAPP+GALFA scan: 812100093 2008-Apr-30 18:26:21 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-30 18:26:21 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-30 18:26:21 LOG5 begin_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2008-Apr-30 18:26:21 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-30 18:26:21 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Apr-30 18:26:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 18:26:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:26:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:26:21 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80782.00 2008-Apr-30 18:26:22 INFO5 check_wapp_levels: WAPP power levels are between 1.216 and 1.534 (still bad) 2008-Apr-30 18:26:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-30 18:26:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:26:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:26:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-30 18:26:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:26:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:26:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:26:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:26:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:26:24 INFO5 check_wapp_levels: WAPP power levels are between 1.184 and 1.493 (still bad) 2008-Apr-30 18:26:26 INFO5 check_wapp_levels: WAPP power levels are between 1.183 and 1.495 (still bad) 2008-Apr-30 18:26:28 INFO5 check_wapp_levels: WAPP power levels are between 1.181 and 1.492 (still bad) 2008-Apr-30 18:26:30 INFO5 check_wapp_levels: WAPP power levels are between 1.181 and 1.493 (still bad) 2008-Apr-30 18:26:32 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-30 18:26:32 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-30 18:26:32 LOG5 end_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2008-Apr-30 18:26:32 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-30 18:26:32 LOG5 end_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2008-Apr-30 18:26:32 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2008-Apr-30 18:26:32 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2008-Apr-30 18:26:32 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2008-Apr-30 18:26:32 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-30 18:26:32 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.33338 J 2008-Apr-30 18:26:32 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.7 2008-Apr-30 18:26:32 LOG2 antvel: Parameters to Doppler: Topocentric 80792 2008 121 0.0 2008-Apr-30 18:26:32 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-30 18:26:32 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2008-Apr-30 18:26:32 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2008-Apr-30 18:26:32 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-30 18:26:32 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-30 18:26:32 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Apr-30 18:26:32 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 18:26:32 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-30 18:26:32 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-30 18:26:32 LOG5 begin_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2008-Apr-30 18:26:32 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-30 18:26:32 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.607169 2008.3333837807693 18.999933 2008-Apr-30 18:26:32 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666665 21.883333333333336 2008-Apr-30 18:26:32 LOG4 log_alfabeam: ALFABEAM 1 9.709455865946829 21.848839284195286 2008-Apr-30 18:26:32 LOG4 log_alfabeam: ALFABEAM 2 9.715218894912612 21.792485317503129 2008-Apr-30 18:26:32 LOG4 log_alfabeam: ALFABEAM 3 9.722437626594999 21.826576957132339 2008-Apr-30 18:26:32 LOG4 log_alfabeam: ALFABEAM 4 9.723877030055311 21.917971350423649 2008-Apr-30 18:26:32 LOG4 log_alfabeam: ALFABEAM 5 9.718079966593063 21.974461387425375 2008-Apr-30 18:26:32 LOG4 log_alfabeam: ALFABEAM 6 9.710877714124699 21.939421340681914 2008-Apr-30 18:26:32 INFO2 take_spectra: Starting WAPP+GALFA scan: 812100094 2008-Apr-30 18:26:33 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-30 18:26:33 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-30 18:26:33 LOG5 begin_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2008-Apr-30 18:26:33 INFO5 check_wapp_levels: WAPP power levels are between 1.183 and 1.493 (still bad) 2008-Apr-30 18:26:33 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-30 18:26:33 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Apr-30 18:26:33 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 18:26:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:26:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:26:33 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80794.00 2008-Apr-30 18:26:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-30 18:26:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:26:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:26:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-30 18:26:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:26:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:26:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:26:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:26:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:26:35 INFO5 check_wapp_levels: WAPP power levels are between 1.183 and 1.492 (still bad) 2008-Apr-30 18:26:37 INFO5 check_wapp_levels: WAPP power levels are between 1.179 and 1.492 (still bad) 2008-Apr-30 18:26:39 INFO5 check_wapp_levels: WAPP power levels are between 1.177 and 1.491 (still bad) 2008-Apr-30 18:26:41 INFO5 check_wapp_levels: WAPP power levels are between 1.178 and 9.163 (still bad) 2008-Apr-30 18:26:43 INFO5 check_wapp_levels: WAPP power levels are between 1.177 and 9.207 (still bad) 2008-Apr-30 18:26:44 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-30 18:26:44 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-30 18:26:44 LOG5 end_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2008-Apr-30 18:26:44 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-30 18:26:44 LOG5 end_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2008-Apr-30 18:26:44 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2008-Apr-30 18:26:44 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2008-Apr-30 18:26:44 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2008-Apr-30 18:26:44 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-30 18:26:44 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.33338 J 2008-Apr-30 18:26:44 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.7 2008-Apr-30 18:26:44 LOG2 antvel: Parameters to Doppler: Topocentric 80804 2008 121 0.0 2008-Apr-30 18:26:44 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-30 18:26:44 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2008-Apr-30 18:26:44 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2008-Apr-30 18:26:44 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-30 18:26:44 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-30 18:26:44 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Apr-30 18:26:44 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 18:26:44 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-30 18:26:44 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-30 18:26:44 LOG5 begin_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2008-Apr-30 18:26:44 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-30 18:26:44 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.610512 2008.3333841610263 18.999933 2008-Apr-30 18:26:44 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666665 21.883333333333322 2008-Apr-30 18:26:44 LOG4 log_alfabeam: ALFABEAM 1 9.709457827846530 21.848760072825517 2008-Apr-30 18:26:44 LOG4 log_alfabeam: ALFABEAM 2 9.715224010398098 21.792469803200316 2008-Apr-30 18:26:44 LOG4 log_alfabeam: ALFABEAM 3 9.722440835933471 21.826639698848460 2008-Apr-30 18:26:44 LOG4 log_alfabeam: ALFABEAM 4 9.723875051138021 21.918051203385403 2008-Apr-30 18:26:44 LOG4 log_alfabeam: ALFABEAM 5 9.718074719304539 21.974477372289776 2008-Apr-30 18:26:44 LOG4 log_alfabeam: ALFABEAM 6 9.710874502564117 21.939356523079443 2008-Apr-30 18:26:44 INFO2 take_spectra: Starting WAPP+GALFA scan: 812100095 2008-Apr-30 18:26:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-30 18:26:45 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-30 18:26:45 LOG5 begin_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2008-Apr-30 18:26:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-30 18:26:45 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Apr-30 18:26:45 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 18:26:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:26:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:26:45 INFO5 check_wapp_levels: WAPP power levels are between 1.177 and 9.116 (still bad) 2008-Apr-30 18:26:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80806.00 2008-Apr-30 18:26:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-30 18:26:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:26:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:26:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-30 18:26:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:26:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:26:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:26:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:26:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:26:47 INFO5 check_wapp_levels: WAPP power levels are between 1.177 and 9.116 (still bad) 2008-Apr-30 18:26:49 INFO5 check_wapp_levels: WAPP power levels are between 1.171 and 6.454 (still bad) 2008-Apr-30 18:26:51 INFO5 check_wapp_levels: WAPP power levels are between 1.173 and 9.217 (still bad) 2008-Apr-30 18:26:53 INFO5 check_wapp_levels: WAPP power levels are between 1.173 and 7.308 (still bad) 2008-Apr-30 18:26:55 INFO5 check_wapp_levels: WAPP power levels are between 1.172 and 8.976 (still bad) 2008-Apr-30 18:26:56 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-30 18:26:56 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-30 18:26:56 LOG5 end_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2008-Apr-30 18:26:56 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-30 18:26:56 LOG5 end_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2008-Apr-30 18:26:56 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2008-Apr-30 18:26:56 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2008-Apr-30 18:26:56 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2008-Apr-30 18:26:56 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-30 18:26:56 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.33338 J 2008-Apr-30 18:26:56 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.7 2008-Apr-30 18:26:56 LOG2 antvel: Parameters to Doppler: Topocentric 80816 2008 121 0.0 2008-Apr-30 18:26:56 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-30 18:26:56 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2008-Apr-30 18:26:56 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2008-Apr-30 18:26:56 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-30 18:26:56 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-30 18:26:56 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Apr-30 18:26:56 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 18:26:56 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-30 18:26:56 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-30 18:26:56 LOG5 begin_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2008-Apr-30 18:26:56 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-30 18:26:56 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.613854 2008.3333845412833 18.999933 2008-Apr-30 18:26:56 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333333 2008-Apr-30 18:26:56 LOG4 log_alfabeam: ALFABEAM 1 9.709459802631388 21.848680545394910 2008-Apr-30 18:26:56 LOG4 log_alfabeam: ALFABEAM 2 9.715229148531193 21.792454279255509 2008-Apr-30 18:26:56 LOG4 log_alfabeam: ALFABEAM 3 9.722444055412785 21.826702742919235 2008-Apr-30 18:26:56 LOG4 log_alfabeam: ALFABEAM 4 9.723873059172083 21.918131375390207 2008-Apr-30 18:26:56 LOG4 log_alfabeam: ALFABEAM 5 9.718069448631052 21.974493366869023 2008-Apr-30 18:26:56 LOG4 log_alfabeam: ALFABEAM 6 9.710871281053270 21.939291392149073 2008-Apr-30 18:26:56 INFO2 take_spectra: Starting WAPP+GALFA scan: 812100096 2008-Apr-30 18:26:57 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-30 18:26:57 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-30 18:26:57 LOG5 begin_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2008-Apr-30 18:26:57 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-30 18:26:57 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Apr-30 18:26:57 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 18:26:57 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:26:57 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:26:57 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80818.00 2008-Apr-30 18:26:58 INFO5 check_wapp_levels: WAPP power levels are between 1.172 and 9.020 (still bad) 2008-Apr-30 18:26:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-30 18:26:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:26:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:26:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-30 18:26:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:26:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:26:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:26:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:26:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:27:00 INFO5 check_wapp_levels: WAPP power levels are between 1.166 and 9.217 (still bad) 2008-Apr-30 18:27:02 INFO5 check_wapp_levels: WAPP power levels are between 1.167 and 9.207 (still bad) 2008-Apr-30 18:27:04 INFO5 check_wapp_levels: WAPP power levels are between 1.168 and 9.211 (still bad) 2008-Apr-30 18:27:06 INFO5 check_wapp_levels: WAPP power levels are between 1.167 and 9.196 (still bad) 2008-Apr-30 18:27:08 INFO5 check_wapp_levels: WAPP power levels are between 1.167 and 9.193 (still bad) 2008-Apr-30 18:27:08 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-30 18:27:08 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-30 18:27:08 LOG5 end_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2008-Apr-30 18:27:08 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-30 18:27:08 LOG5 end_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2008-Apr-30 18:27:08 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2008-Apr-30 18:27:08 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2008-Apr-30 18:27:08 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2008-Apr-30 18:27:08 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-30 18:27:08 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.33338 J 2008-Apr-30 18:27:08 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.7 2008-Apr-30 18:27:08 LOG2 antvel: Parameters to Doppler: Topocentric 80828 2008 121 0.0 2008-Apr-30 18:27:08 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-30 18:27:08 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2008-Apr-30 18:27:08 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2008-Apr-30 18:27:08 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-30 18:27:08 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-30 18:27:08 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Apr-30 18:27:08 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 18:27:08 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-30 18:27:08 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-30 18:27:08 LOG5 begin_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2008-Apr-30 18:27:08 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-30 18:27:08 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.617197 2008.3333849215403 18.999933 2008-Apr-30 18:27:08 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333333 2008-Apr-30 18:27:08 LOG4 log_alfabeam: ALFABEAM 1 9.709461791620614 21.848600651572230 2008-Apr-30 18:27:08 LOG4 log_alfabeam: ALFABEAM 2 9.715234312594633 21.792438736557688 2008-Apr-30 18:27:08 LOG4 log_alfabeam: ALFABEAM 3 9.722447287034061 21.826766129963154 2008-Apr-30 18:27:08 LOG4 log_alfabeam: ALFABEAM 4 9.723871052826071 21.918211917177562 2008-Apr-30 18:27:08 LOG4 log_alfabeam: ALFABEAM 5 9.718064151203809 21.974509380537302 2008-Apr-30 18:27:08 LOG4 log_alfabeam: ALFABEAM 6 9.710868047593090 21.939225905928165 2008-Apr-30 18:27:08 INFO2 take_spectra: Starting WAPP+GALFA scan: 812100097 2008-Apr-30 18:27:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-30 18:27:09 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-30 18:27:09 LOG5 begin_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2008-Apr-30 18:27:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-30 18:27:09 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Apr-30 18:27:09 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 18:27:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:27:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:27:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80830.00 2008-Apr-30 18:27:10 INFO5 check_wapp_levels: WAPP power levels are between 1.168 and 9.197 (still bad) 2008-Apr-30 18:27:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-30 18:27:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:27:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:27:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-30 18:27:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:27:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:27:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:27:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:27:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:27:12 INFO5 check_wapp_levels: WAPP power levels are between 1.165 and 9.192 (still bad) 2008-Apr-30 18:27:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (9.182 > 1.4)! 2008-Apr-30 18:27:14 LOG4 check_wapp_levels: WAPP-1 power levels: 1.300 9.182 1.184 1.191 2008-Apr-30 18:27:14 LOG4 check_wapp_levels: WAPP-2 power levels: 1.351 1.312 1.294 1.447 2008-Apr-30 18:27:14 LOG4 check_wapp_levels: WAPP-3 power levels: 1.269 1.290 1.359 1.165 2008-Apr-30 18:27:14 LOG4 check_wapp_levels: WAPP-4 power levels: 1.374 1.401 1.496 1.245 2008-Apr-30 18:27:16 INFO5 check_wapp_levels: WAPP power levels are between 1.167 and 9.172 (still bad) 2008-Apr-30 18:27:18 INFO5 check_wapp_levels: WAPP power levels are between 1.166 and 9.183 (still bad) 2008-Apr-30 18:27:20 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-30 18:27:20 INFO5 check_wapp_levels: WAPP power levels are between 1.166 and 9.188 (still bad) 2008-Apr-30 18:27:20 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-30 18:27:20 LOG5 end_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2008-Apr-30 18:27:20 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-30 18:27:20 LOG5 end_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2008-Apr-30 18:27:20 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2008-Apr-30 18:27:20 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2008-Apr-30 18:27:20 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2008-Apr-30 18:27:20 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-30 18:27:20 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.33339 J 2008-Apr-30 18:27:20 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.7 2008-Apr-30 18:27:20 LOG2 antvel: Parameters to Doppler: Topocentric 80840 2008 121 0.0 2008-Apr-30 18:27:20 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-30 18:27:20 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2008-Apr-30 18:27:20 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2008-Apr-30 18:27:20 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-30 18:27:20 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-30 18:27:20 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Apr-30 18:27:20 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 18:27:20 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-30 18:27:20 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-30 18:27:20 LOG5 begin_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2008-Apr-30 18:27:20 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-30 18:27:20 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.620539 2008.3333853017975 18.999933 2008-Apr-30 18:27:20 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333329 2008-Apr-30 18:27:20 LOG4 log_alfabeam: ALFABEAM 1 9.709463793763435 21.848520436389482 2008-Apr-30 18:27:20 LOG4 log_alfabeam: ALFABEAM 2 9.715239499709021 21.792423184590586 2008-Apr-30 18:27:20 LOG4 log_alfabeam: ALFABEAM 3 9.722450528938879 21.826829824980962 2008-Apr-30 18:27:20 LOG4 log_alfabeam: ALFABEAM 4 9.723869033159181 21.918292783350477 2008-Apr-30 18:27:20 LOG4 log_alfabeam: ALFABEAM 5 9.718058829975185 21.974525403510178 2008-Apr-30 18:27:20 LOG4 log_alfabeam: ALFABEAM 6 9.710864804046389 21.939160100575680 2008-Apr-30 18:27:20 INFO2 take_spectra: Starting WAPP+GALFA scan: 812100098 2008-Apr-30 18:27:21 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-30 18:27:21 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-30 18:27:21 LOG5 begin_task: Level: (4) ID = <10088> Status = 0 0 0 0 ok 2008-Apr-30 18:27:21 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-30 18:27:21 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Apr-30 18:27:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 18:27:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:27:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:27:21 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80842.00 2008-Apr-30 18:27:22 INFO5 check_wapp_levels: WAPP power levels are between 1.165 and 9.171 (still bad) 2008-Apr-30 18:27:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-30 18:27:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:27:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:27:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-30 18:27:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:27:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:27:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:27:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:27:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:27:24 INFO5 check_wapp_levels: WAPP power levels are between 1.164 and 9.160 (still bad) 2008-Apr-30 18:27:26 INFO5 check_wapp_levels: WAPP power levels are between 1.163 and 9.178 (still bad) 2008-Apr-30 18:27:28 INFO5 check_wapp_levels: WAPP power levels are between 1.164 and 9.175 (still bad) 2008-Apr-30 18:27:30 INFO5 check_wapp_levels: WAPP power levels are between 1.163 and 9.171 (still bad) 2008-Apr-30 18:27:32 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-30 18:27:32 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-30 18:27:32 LOG5 end_task: Level: (4) ID = <10088> Status = 0 0 0 0 ok 2008-Apr-30 18:27:32 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-30 18:27:32 LOG5 end_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2008-Apr-30 18:27:32 INFO2 smartfreq: Switching off CAL 2008-Apr-30 18:27:32 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-30 18:27:32 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-30 18:27:32 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-30 18:27:32 LOG5 begin_task: Level: (3) ID = <10089> Status = 0 0 0 0 ok 2008-Apr-30 18:27:32 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-30 18:27:32 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-30 18:27:32 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-30 18:27:32 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-30 18:27:32 LOG5 end_task: Level: (3) ID = <10089> Status = 0 0 0 0 ok 2008-Apr-30 18:27:32 INFO3 restore_frequencies: Restoring original frequencies 2008-Apr-30 18:27:32 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-30 18:27:32 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.33339 J 2008-Apr-30 18:27:32 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.7 2008-Apr-30 18:27:32 LOG2 antvel: Parameters to Doppler: Topocentric 80852 2008 121 0.0 2008-Apr-30 18:27:32 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-30 18:27:32 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.2 rest0=1381.2 rest1=1381.2 rest2=1381.2 rest3=1381.2 rest4=1381.2 rest5=1381.2 rest6=1381.2 rest7=1381.2 2008-Apr-30 18:27:32 INFO4 dopset_gen: New sky frequencies: 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 2008-Apr-30 18:27:32 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.200000 sky0=1381.200000 sky1=1381.200000 sky2=1381.200000 sky3=1381.200000 sky4=1381.200000 sky5=1381.200000 sky6=1381.200000 sky7=1381.200000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-30 18:27:32 LOG2 dopset_gen: Result from 'sky2syn': 1631.200000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-30 18:27:32 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2008-Apr-30 18:27:32 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 18:27:32 STOP finish_task: Finishing task 'smart frequency switching' 2008-Apr-30 18:27:32 LOG5 finish_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2008-Apr-30 18:27:32 DONE finish_task: DONE finished pattern: smart frequency switching 2008-Apr-30 18:27:32 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-30 18:27:32 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2008-Apr-30 18:27:32 LOG5 end_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2008-Apr-30 18:27:32 NOTE run_command_file: DONE with command file processing 2008-Apr-30 18:27:32 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2008-Apr-30 18:27:32 STOP finish_task: Finishing task 'running command file 'command_galfasrc.cmd'' 2008-Apr-30 18:27:32 LOG5 finish_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Apr-30 18:27:32 DONE finish_task: DONE finished running: command file 'command_galfasrc.cmd' 2008-Apr-30 18:27:32 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-30 18:27:33 END end_task: Finishing task 'running command file 'command_galfasrc.cmd'' with status 'OK' 2008-Apr-30 18:27:33 LOG5 end_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Apr-30 18:27:33 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2008-Apr-30 18:27:33 INFO5 check_wapp_levels: WAPP power levels are between 1.163 and 9.153 (still bad) 2008-Apr-30 18:27:33 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 18:27:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:27:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:29:03 INFO1 CIMA-run_command_file: Transferring command file '080430_obs.cmd ' to executive ... 2008-Apr-30 18:29:03 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 3 {LOAD ages_config.conf} 2008-Apr-30 18:29:03 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 4 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5} 2008-Apr-30 18:29:03 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {FIXEDDRIFT az=246.90 alfaangle=-50.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p1_014 ra=95300.00 dec=233330.00} 2008-Apr-30 18:29:03 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 11 {FIXEDDRIFT az=237.13 alfaangle=-37.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p1_016 ra=95300.00 dec=233030.00} 2008-Apr-30 18:29:03 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 15 {FIXEDDRIFT az=210.37 alfaangle=-8.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p1_018 ra=95300.00 dec=232730.00} 2008-Apr-30 18:29:03 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 19 {FIXEDDRIFT az=149.37 alfaangle=47.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p1_020 ra=95300.00 dec=232430.00} 2008-Apr-30 18:29:03 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 23 {FIXEDDRIFT az=122.10 alfaangle=76.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p1_022 ra=95300.00 dec=232130.00} 2008-Apr-30 18:29:03 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 27 {FIXEDDRIFT az=112.15 alfaangle=-90.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p1_024 ra=95300.00 dec=231830.00} 2008-Apr-30 18:29:03 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 31 {FIXEDDRIFT az=313.22 alfaangle=58.9 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_068 ra=120900.00 dec=71930.00} 2008-Apr-30 18:29:03 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 35 {FIXEDDRIFT az=332.56 alfaangle=41.9 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_070 ra=120900.00 dec=71630.00} 2008-Apr-30 18:29:03 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 39 {FIXEDDRIFT az=0.00 alfaangle=19.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_072 ra=120900.00 dec=71330.00} 2008-Apr-30 18:29:03 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 43 {FIXEDDRIFT az=27.24 alfaangle=-3.5 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_074 ra=120900.00 dec=71030.00} 2008-Apr-30 18:29:03 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 47 {FIXEDDRIFT az=46.27 alfaangle=-20.2 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_076 ra=120900.00 dec=70730.00} 2008-Apr-30 18:29:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 14 51 {FIXEDDRIFT az=47.36 alfaangle=-21.2 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p1_069 ra=122900.00 dec=71800.00} 2008-Apr-30 18:29:04 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-Apr-30 18:29:04 LOG4 exec_msg: From OBSERVER: run_command_file 080430_obs.cmd 1 1 14 2008-Apr-30 18:29:04 LOG4 run_command_file: Calling 'run_command_file 080430_obs.cmd 1 1 14' 2008-Apr-30 18:29:04 BEGIN begin_task: Starting task 'running command file '080430_obs.cmd'' 2008-Apr-30 18:29:04 LOG5 begin_task: Level: (1) ID = <10090> Status = 0 0 0 0 ok 2008-Apr-30 18:29:04 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '080430_obs.cmd' ...} 2008-Apr-30 18:29:04 NOTE run_command_file: Starting execution of command file '080430_obs.cmd' from line 1 2008-Apr-30 18:29:04 COMMAND run_command_line: EXECUTING command 3: 'LOAD ages_config.conf' 2008-Apr-30 18:29:04 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2008-Apr-30 18:29:04 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-30 18:29:04 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2008-Apr-30 18:29:04 NOTE CIMA-load_config_file: Loading configuration file 'ages_config.conf' 2008-Apr-30 18:29:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Apr-30 18:29:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Apr-30 18:29:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Apr-30 18:29:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Apr-30 18:29:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Apr-30 18:29:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2008-Apr-30 18:29:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Apr-30 18:29:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786" 2008-Apr-30 18:29:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786" 2008-Apr-30 18:29:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786" 2008-Apr-30 18:29:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786" 2008-Apr-30 18:29:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786" 2008-Apr-30 18:29:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786" 2008-Apr-30 18:29:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786" 2008-Apr-30 18:29:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786" 2008-Apr-30 18:29:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786" 2008-Apr-30 18:29:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Apr-30 18:29:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Apr-30 18:29:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Apr-30 18:29:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Apr-30 18:29:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Apr-30 18:29:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Apr-30 18:29:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Apr-30 18:29:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Apr-30 18:29:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Apr-30 18:29:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Apr-30 18:29:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Apr-30 18:29:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Apr-30 18:29:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Apr-30 18:29:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2008-Apr-30 18:29:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Apr-30 18:29:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Apr-30 18:29:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Apr-30 18:29:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Apr-30 18:29:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Apr-30 18:29:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Apr-30 18:29:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Apr-30 18:29:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Apr-30 18:29:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Apr-30 18:29:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1670.405752" 2008-Apr-30 18:29:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Apr-30 18:29:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Apr-30 18:29:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Apr-30 18:29:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Apr-30 18:29:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Apr-30 18:29:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Apr-30 18:29:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Apr-30 18:29:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Apr-30 18:29:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Apr-30 18:29:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Apr-30 18:29:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Apr-30 18:29:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Apr-30 18:29:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Apr-30 18:29:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Apr-30 18:29:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Apr-30 18:29:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Apr-30 18:29:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Apr-30 18:29:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Apr-30 18:29:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Apr-30 18:29:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Apr-30 18:29:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Apr-30 18:29:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Apr-30 18:29:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Apr-30 18:29:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Apr-30 18:29:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Apr-30 18:29:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Apr-30 18:29:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Apr-30 18:29:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Apr-30 18:29:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Apr-30 18:29:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Apr-30 18:29:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Apr-30 18:29:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Apr-30 18:29:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Apr-30 18:29:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Apr-30 18:29:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Apr-30 18:29:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Apr-30 18:29:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Apr-30 18:29:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Apr-30 18:29:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Apr-30 18:29:06 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-30 18:29:06 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Apr-30 18:29:06 LOG5 begin_task: Level: (2) ID = <10091> Status = 0 0 0 0 ok 2008-Apr-30 18:29:06 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Apr-30 18:29:06 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Apr-30 18:29:06 LOG1 config_iflo: Receiver ALFA already selected 2008-Apr-30 18:29:06 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-30 18:29:06 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-30 18:29:06 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-30 18:29:06 LOG5 begin_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2008-Apr-30 18:29:07 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-30 18:29:07 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-30 18:29:07 LOG5 end_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2008-Apr-30 18:29:07 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-30 18:29:07 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-30 18:29:07 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2008-Apr-30 18:29:07 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2008-Apr-30 18:29:07 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Apr-30 18:29:07 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Apr-30 18:29:07 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2008-Apr-30 18:29:07 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2008-Apr-30 18:29:07 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2008-Apr-30 18:29:07 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1670405752.0} 2008-Apr-30 18:29:07 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2008-Apr-30 18:29:07 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2008-Apr-30 18:29:07 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Apr-30 18:29:07 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Apr-30 18:29:07 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Apr-30 18:29:07 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Apr-30 18:29:07 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Apr-30 18:29:07 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2008-Apr-30 18:29:07 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2008-Apr-30 18:29:07 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2008-Apr-30 18:29:07 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2008-Apr-30 18:29:07 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Apr-30 18:29:07 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2008-Apr-30 18:29:07 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2008-Apr-30 18:29:07 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Apr-30 18:29:07 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 18:29:07 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2008-Apr-30 18:29:07 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2008-Apr-30 18:29:07 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Apr-30 18:29:07 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2008-Apr-30 18:29:07 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2008-Apr-30 18:29:07 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Apr-30 18:29:07 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 18:29:07 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Apr-30 18:29:07 LOG5 begin_task: Level: (3) ID = <10093> Status = 0 0 0 0 ok 2008-Apr-30 18:29:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1670405752.0} 2008-Apr-30 18:29:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Apr-30 18:29:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 18:29:07 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 18:29:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:29:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:29:08 LOG4 got_cormsg: From DATATAKING: vw% DONE 2008-Apr-30 18:29:08 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Apr-30 18:29:08 LOG5 end_task: Level: (3) ID = <10093> Status = 0 0 0 0 ok 2008-Apr-30 18:29:08 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Apr-30 18:29:08 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Apr-30 18:29:08 LOG5 finish_task: Level: (2) ID = <10091> Status = 0 0 0 0 ok 2008-Apr-30 18:29:08 DONE finish_task: DONE finished configuration: IF/LO path 2008-Apr-30 18:29:08 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-30 18:29:08 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Apr-30 18:29:08 LOG5 end_task: Level: (2) ID = <10091> Status = 0 0 0 0 ok 2008-Apr-30 18:29:08 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Apr-30 18:29:08 LOG5 begin_task: Level: (2) ID = <10094> Status = 0 0 0 0 ok 2008-Apr-30 18:29:08 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Apr-30 18:29:08 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Apr-30 18:29:08 START begin_task: Starting task 'selecting calibration port' 2008-Apr-30 18:29:08 LOG5 begin_task: Level: (3) ID = <10095> Status = 0 0 0 0 ok 2008-Apr-30 18:29:08 LOG3 vw_send: To DATATAKING: calport 3 2008-Apr-30 18:29:08 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Apr-30 18:29:08 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 18:29:08 START begin_task: Starting task 'waiting on calport' 2008-Apr-30 18:29:08 LOG5 begin_task: Level: (4) ID = <10096> Status = 0 0 0 0 ok 2008-Apr-30 18:29:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:29:08 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Apr-30 18:29:08 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 18:29:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:29:08 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-30 18:29:08 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Apr-30 18:29:08 LOG5 end_task: Level: (4) ID = <10096> Status = 0 0 0 0 ok 2008-Apr-30 18:29:08 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Apr-30 18:29:08 STOP finish_task: Finishing task 'selecting calibration port' 2008-Apr-30 18:29:08 LOG5 finish_task: Level: (3) ID = <10095> Status = 0 0 0 0 ok 2008-Apr-30 18:29:08 INFO2 finish_task: DONE finished configuring: calibration port 2008-Apr-30 18:29:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 18:29:08 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Apr-30 18:29:08 LOG5 end_task: Level: (3) ID = <10095> Status = 0 0 0 0 ok 2008-Apr-30 18:29:08 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Apr-30 18:29:08 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Apr-30 18:29:08 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Apr-30 18:29:08 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Apr-30 18:29:08 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Apr-30 18:29:08 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Apr-30 18:29:09 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Apr-30 18:29:09 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Apr-30 18:29:09 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 SS 2008-Apr-30 18:29:09 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 SS 2008-Apr-30 18:29:09 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 SS 2008-Apr-30 18:29:09 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 SS 2008-Apr-30 18:29:09 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Apr-30 18:29:09 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Apr-30 18:29:09 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-30 18:29:09 LOG5 begin_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2008-Apr-30 18:29:09 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Apr-30 18:29:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:29:09 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-30 18:29:09 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Apr-30 18:29:09 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-30 18:29:09 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 SS' 2008-Apr-30 18:29:09 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-30 18:29:09 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-30 18:29:09 LOG5 end_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2008-Apr-30 18:29:09 LOG3 sock_errsend: To WAPPDATA: FLUSH 2008-Apr-30 18:29:09 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Apr-30 18:29:09 LOG5 finish_task: Level: (2) ID = <10094> Status = 0 0 0 0 ok 2008-Apr-30 18:29:09 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Apr-30 18:29:09 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-30 18:29:09 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Apr-30 18:29:09 LOG5 end_task: Level: (2) ID = <10094> Status = 0 0 0 0 ok 2008-Apr-30 18:29:09 COMMAND run_command_line: EXECUTING command 4: 'SETUP FIXEDDRIFT calwhen=tracking calsecs=5' 2008-Apr-30 18:29:09 COMMAND run_command_line: EXECUTING command 7: 'FIXEDDRIFT az=246.90 alfaangle=-50.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p1_014 ra=95300.00 dec=233330.00' 2008-Apr-30 18:29:09 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-30 18:29:09 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Apr-30 18:29:09 WARNING check_obsmode: WARNING failed to get a response from the CIMA frontend when checking options for 'fixed azimuth drift map'! 2008-Apr-30 18:29:09 NOTE check_obsmode: Assuming that the options are OK 2008-Apr-30 18:29:09 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 246.90 -50.3 hcorcal 5 tracking no first 1 AGES3193_p1_014 95300.00 233330.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-30 18:29:09 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-30 18:29:09 LOG5 begin_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2008-Apr-30 18:29:09 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'galfasrc' 2008-Apr-30 18:29:09 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-30 18:29:09 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p1_014} 2008-Apr-30 18:29:09 INFO3 fixed_driftmap: Sending telescope to Az = 246.90 and ZA = 14.70 2008-Apr-30 18:29:09 LOG3 track_source: Calling 'track_source AGES3193_p1_014 246.90 14.6985378570 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-30 18:29:09 START begin_task: Starting task 'sending tracking commands' 2008-Apr-30 18:29:10 LOG5 begin_task: Level: (3) ID = <10099> Status = 0 0 0 0 ok 2008-Apr-30 18:29:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p1_014} INFO {Slewing to source 'AGES3193_p1_014' ...} 2008-Apr-30 18:29:10 INFO1 track_source: Starting to track AGES3193_p1_014 2008-Apr-30 18:29:10 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p1_014" 2008-Apr-30 18:29:10 LOG3 vw_send: To DATATAKING: set ra 246.90 2008-Apr-30 18:29:10 LOG3 vw_send: To DATATAKING: set dec 14.6985378570 2008-Apr-30 18:29:10 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-30 18:29:10 LOG3 vw_send: To DATATAKING: pnt tr 246.90 14.6985378570 -CF 2008-Apr-30 18:29:10 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-30 18:29:10 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-30 18:29:10 LOG5 finish_task: Level: (3) ID = <10099> Status = 0 0 0 0 ok 2008-Apr-30 18:29:10 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-30 18:29:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 18:29:10 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-30 18:29:10 LOG5 end_task: Level: (3) ID = <10099> Status = 0 0 0 0 ok 2008-Apr-30 18:29:10 START begin_task: Starting task 'rotate ALFA to -50.3 degrees' 2008-Apr-30 18:29:10 LOG5 begin_task: Level: (3) ID = <10100> Status = 0 0 0 0 ok 2008-Apr-30 18:29:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -50.3 degrees ...} 2008-Apr-30 18:29:10 INFO2 rotate_alfa: ALFA commanded to -50.3 degrees 2008-Apr-30 18:29:10 LOG3 sock_errsend: To ALFAMOTOR: POSITION -50.3 REPLY 2008-Apr-30 18:29:10 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-30 18:29:10 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-30 18:29:10 LOG5 begin_task: Level: (4) ID = <10101> Status = 0 0 0 0 ok 2008-Apr-30 18:29:10 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p1_014" 2008-Apr-30 18:29:10 LOG4 got_cormsg: From DATATAKING: set ra 246.90 2008-Apr-30 18:29:10 LOG4 got_cormsg: From DATATAKING: set dec 14.6985378570 2008-Apr-30 18:29:10 LOG4 got_cormsg: From DATATAKING: vw% 246.90 2008-Apr-30 18:29:10 LOG4 got_cormsg: From DATATAKING: 2008-Apr-30 18:29:10 LOG4 got_cormsg: From DATATAKING: vw% 14.6985378570 2008-Apr-30 18:29:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:29:10 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-30 18:29:10 LOG4 got_cormsg: From DATATAKING: pnt tr 246.90 14.6985378570 -CF 2008-Apr-30 18:29:10 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-30 18:29:10 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-30 18:29:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:29:12 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-30 18:29:49 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-30 18:29:49 INFO3 alfa_motor: ALFA rotator in-position -50.30 degrees 2008-Apr-30 18:29:49 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-30 18:29:49 LOG5 end_task: Level: (4) ID = <10101> Status = 0 0 0 0 ok 2008-Apr-30 18:29:50 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-30 18:29:50 STOP finish_task: Finishing task 'rotate ALFA to -50.3 degrees' 2008-Apr-30 18:29:50 LOG5 finish_task: Level: (3) ID = <10100> Status = 0 0 0 0 ok 2008-Apr-30 18:29:50 INFO2 finish_task: DONE finished configuration: rotating ALFA to -50.3 degrees 2008-Apr-30 18:29:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 18:29:50 STOP end_task: Finishing task 'rotate ALFA to -50.3 degrees' with status 'OK' 2008-Apr-30 18:29:50 LOG5 end_task: Level: (3) ID = <10100> Status = 0 0 0 0 ok 2008-Apr-30 18:29:50 START begin_task: Starting task 'waiting on telescope' 2008-Apr-30 18:29:50 LOG5 begin_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2008-Apr-30 18:29:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-30 18:29:50 LOG3 waittrk: Start waittrk 5 2008-Apr-30 18:29:50 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-30 18:29:50 LOG5 begin_task: Level: (4) ID = <10103> Status = 0 0 0 0 ok 2008-Apr-30 18:29:55 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-30 18:29:55 LOG5 end_task: Level: (4) ID = <10103> Status = 0 0 0 0 ok 2008-Apr-30 18:29:55 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-30 18:29:55 LOG5 begin_task: Level: (4) ID = <10104> Status = 0 0 0 0 ok 2008-Apr-30 18:29:55 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-30 18:29:55 LOG5 end_task: Level: (4) ID = <10104> Status = 0 0 0 0 ok 2008-Apr-30 18:29:55 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-30 18:29:55 INFO2 waittrk: Now tracking AGES3193_p1_014 2008-Apr-30 18:29:55 LOG4 waittrk: Current telescope position: Az = 246.46 ZA = 14.71 2008-Apr-30 18:29:55 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-30 18:29:55 LOG5 finish_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2008-Apr-30 18:29:55 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-30 18:29:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 18:29:55 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-30 18:29:55 LOG5 end_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2008-Apr-30 18:29:55 START begin_task: Starting task 'selecting calibration type' 2008-Apr-30 18:29:55 LOG5 begin_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2008-Apr-30 18:29:55 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-30 18:29:55 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-30 18:29:55 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 18:29:55 START begin_task: Starting task 'waiting on setcal' 2008-Apr-30 18:29:55 LOG5 begin_task: Level: (4) ID = <10106> Status = 0 0 0 0 ok 2008-Apr-30 18:29:55 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-30 18:29:55 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 18:29:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:29:55 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-30 18:29:55 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-30 18:29:55 LOG5 end_task: Level: (4) ID = <10106> Status = 0 0 0 0 ok 2008-Apr-30 18:29:55 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-30 18:29:55 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-30 18:29:55 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-30 18:29:55 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-30 18:29:55 LOG5 begin_task: Level: (4) ID = <10107> Status = 0 0 0 0 ok 2008-Apr-30 18:29:55 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-30 18:29:55 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-30 18:29:55 LOG5 end_task: Level: (4) ID = <10107> Status = 0 0 0 0 ok 2008-Apr-30 18:29:55 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-30 18:29:55 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-30 18:29:55 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-30 18:29:55 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-30 18:29:55 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-30 18:29:55 LOG5 begin_task: Level: (4) ID = <10108> Status = 0 0 0 0 ok 2008-Apr-30 18:29:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:29:55 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-30 18:29:55 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-30 18:29:55 LOG5 end_task: Level: (4) ID = <10108> Status = 0 0 0 0 ok 2008-Apr-30 18:29:55 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-30 18:29:55 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-30 18:29:55 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-30 18:29:55 LOG5 finish_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2008-Apr-30 18:29:55 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-30 18:29:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 18:29:55 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-30 18:29:55 LOG5 end_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2008-Apr-30 18:29:56 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2008-Apr-30 18:29:56 INFO2 astwait: Waiting for 817 seconds from 22:29:56 to 22:43:33 UTC ... 2008-Apr-30 18:29:56 LOG4 send_obs_status: To obs_status: <1> TASKTIME 817 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-30 18:29:56 START begin_task: Starting task 'waiting on waiting for AST time' 2008-Apr-30 18:29:56 LOG5 begin_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2008-Apr-30 18:43:33 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2008-Apr-30 18:43:33 LOG5 end_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2008-Apr-30 18:43:33 INFO3 astwait: Finished waiting 2008-Apr-30 18:43:33 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-30 18:43:33 LOG5 dopset_later: Calling 'dopset_later 61.474714166504462' 2008-Apr-30 18:43:33 INFO3 dopset_later: Setting Doppler correction for 18:44:33 (61.5 seconds from now) 2008-Apr-30 18:43:33 LOG5 antvel: Calling 'antvel 246.900000 14.698538 F 61.474714166504462' 2008-Apr-30 18:43:33 LOG2 antvel: Parameters to Doppler: Heliocentric 81873 2008 121 0.0 2008-Apr-30 18:43:33 INFO5 antvel: Computed antenna velocity: +28.32927 km/s 2008-Apr-30 18:43:33 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=28.329265196800002 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-30 18:43:33 INFO4 dopset_gen: New sky frequencies: 1381.112919 1381.112919 1381.112919 1381.112919 1381.112919 1381.112919 1381.112919 1381.112919 1381.112919 2008-Apr-30 18:43:33 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.112919 sky0=1381.112919 sky1=1381.112919 sky2=1381.112919 sky3=1381.112919 sky4=1381.112919 sky5=1381.112919 sky6=1381.112919 sky7=1381.112919 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-30 18:43:33 LOG2 dopset_gen: Result from 'sky2syn': 1631.112919 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-30 18:43:33 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631112919.0} 2008-Apr-30 18:43:33 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 18:43:33 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-30 18:43:33 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-30 18:43:33 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:02.5 Dec = +23:33:32.6 2008-Apr-30 18:43:33 LOG3 track_source: Calling 'track_source AGES3193_p1_014 095202.5 233332.6 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-30 18:43:33 START begin_task: Starting task 'sending tracking commands' 2008-Apr-30 18:43:33 LOG5 begin_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2008-Apr-30 18:43:33 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p1_014} INFO {Slewing to source 'AGES3193_p1_014' ...} 2008-Apr-30 18:43:33 INFO1 track_source: Starting to track AGES3193_p1_014 2008-Apr-30 18:43:33 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p1_014" 2008-Apr-30 18:43:33 LOG3 vw_send: To DATATAKING: set ra 095202.5 2008-Apr-30 18:43:33 LOG3 vw_send: To DATATAKING: set dec 233332.6 2008-Apr-30 18:43:33 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-30 18:43:33 LOG3 vw_send: To DATATAKING: pnt tr 095202.5 233332.6 -CJ 2008-Apr-30 18:43:33 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-30 18:43:33 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-30 18:43:33 LOG5 finish_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2008-Apr-30 18:43:33 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-30 18:43:33 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 18:43:33 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-30 18:43:33 LOG5 end_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2008-Apr-30 18:43:33 START begin_task: Starting task 'waiting on telescope' 2008-Apr-30 18:43:33 LOG5 begin_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2008-Apr-30 18:43:33 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-30 18:43:33 LOG3 waittrk: Start waittrk 5 2008-Apr-30 18:43:33 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-30 18:43:33 LOG5 begin_task: Level: (4) ID = <10112> Status = 0 0 0 0 ok 2008-Apr-30 18:43:33 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631112919.0} 2008-Apr-30 18:43:33 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 18:43:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:43:33 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p1_014" 2008-Apr-30 18:43:33 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-30 18:43:33 LOG4 got_cormsg: From DATATAKING: set ra 095202.5 2008-Apr-30 18:43:33 LOG4 got_cormsg: From DATATAKING: set dec 233332.6 2008-Apr-30 18:43:33 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-30 18:43:33 LOG4 got_cormsg: From DATATAKING: pnt tr 095202.5 233332.6 -CJ 2008-Apr-30 18:43:33 LOG4 got_cormsg: From DATATAKING: 095202.5 2008-Apr-30 18:43:33 LOG4 got_cormsg: From DATATAKING: vw% 233332.6 2008-Apr-30 18:43:33 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2008-Apr-30 18:43:33 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-30 18:43:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:43:38 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-30 18:43:38 LOG5 end_task: Level: (4) ID = <10112> Status = 0 0 0 0 ok 2008-Apr-30 18:43:38 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-30 18:43:38 LOG5 begin_task: Level: (4) ID = <10113> Status = 0 0 0 0 ok 2008-Apr-30 18:43:40 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-30 18:43:40 LOG5 end_task: Level: (4) ID = <10113> Status = 0 0 0 0 ok 2008-Apr-30 18:43:40 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-30 18:43:40 INFO2 waittrk: Now tracking AGES3193_p1_014 2008-Apr-30 18:43:40 LOG4 waittrk: Current telescope position: Az = 246.43 ZA = 14.70 2008-Apr-30 18:43:40 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-30 18:43:40 LOG5 finish_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2008-Apr-30 18:43:40 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-30 18:43:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 18:43:40 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-30 18:43:40 LOG5 end_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2008-Apr-30 18:43:40 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-30 18:43:40 LOG5 begin_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2008-Apr-30 18:43:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-30 18:43:40 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-30 18:43:40 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-30 18:43:40 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-30 18:43:40 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 18:43:40 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-30 18:43:40 LOG5 begin_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2008-Apr-30 18:43:40 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-30 18:43:40 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 18:43:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:43:44 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-30 18:43:44 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-30 18:43:44 LOG5 end_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2008-Apr-30 18:43:44 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-30 18:43:44 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-30 18:43:44 LOG5 begin_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2008-Apr-30 18:43:44 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-30 18:43:44 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-30 18:43:44 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-30 18:43:44 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-30 18:43:44 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-30 18:43:44 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-30 18:43:44 LOG5 begin_task: Level: (5) ID = <10117> Status = 0 0 0 0 ok 2008-Apr-30 18:43:44 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-30 18:43:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:43:44 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 0 dB --- beam 1: 7 6 dB 2008-Apr-30 18:43:44 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 3 dB --- beam 5: 6 6 dB 2008-Apr-30 18:43:44 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-30 18:43:44 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 3 3 dB 2008-Apr-30 18:43:44 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-30 18:43:44 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-30 18:43:44 LOG5 end_task: Level: (5) ID = <10117> Status = 0 0 0 0 ok 2008-Apr-30 18:43:44 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.945 0.755 ALFA beam 1: 1.113 1.033 2008-Apr-30 18:43:44 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.998 0.920 ALFA beam 3: 0.937 1.035 2008-Apr-30 18:43:44 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.111 0.904 ALFA beam 5: 1.019 0.898 2008-Apr-30 18:43:44 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.040 1.010 ALFA beam 7: 0.905 0.898 2008-Apr-30 18:43:44 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-30 18:43:44 LOG5 finish_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2008-Apr-30 18:43:44 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-30 18:43:44 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 18:43:44 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-30 18:43:44 LOG5 end_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2008-Apr-30 18:43:44 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-30 18:43:44 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-30 18:43:44 LOG5 finish_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2008-Apr-30 18:43:44 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-30 18:43:44 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 18:43:44 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-30 18:43:44 LOG5 end_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2008-Apr-30 18:43:44 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 SS 2008-Apr-30 18:43:44 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 SS 2008-Apr-30 18:43:44 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 SS 2008-Apr-30 18:43:45 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 SS 2008-Apr-30 18:43:45 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-30 18:43:45 START begin_task: Starting task 'WAPP calibration' 2008-Apr-30 18:43:45 LOG5 begin_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2008-Apr-30 18:43:45 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-30 18:43:45 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-30 18:43:45 START begin_task: Starting task 'selecting calibration type' 2008-Apr-30 18:43:45 LOG5 begin_task: Level: (4) ID = <10119> Status = 0 0 0 0 ok 2008-Apr-30 18:43:45 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-30 18:43:45 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-30 18:43:45 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 18:43:45 START begin_task: Starting task 'waiting on setcal' 2008-Apr-30 18:43:45 LOG5 begin_task: Level: (5) ID = <10120> Status = 0 0 0 0 ok 2008-Apr-30 18:43:45 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 SS' 2008-Apr-30 18:43:45 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-30 18:43:45 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 18:43:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:43:45 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-30 18:43:45 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-30 18:43:45 LOG5 end_task: Level: (5) ID = <10120> Status = 0 0 0 0 ok 2008-Apr-30 18:43:45 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-30 18:43:45 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-30 18:43:45 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-30 18:43:45 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-30 18:43:45 LOG5 begin_task: Level: (5) ID = <10121> Status = 0 0 0 0 ok 2008-Apr-30 18:43:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:43:45 NOTE WAPPDATA-new_file: New FITS file: wapp.20080430.a2048.0001.fits 2008-Apr-30 18:43:45 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080430.a2048.0001.fits} 2008-Apr-30 18:43:45 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-30 18:43:45 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-30 18:43:45 LOG5 end_task: Level: (5) ID = <10121> Status = 0 0 0 0 ok 2008-Apr-30 18:43:45 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-30 18:43:45 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-30 18:43:45 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-30 18:43:46 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-30 18:43:46 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-30 18:43:46 LOG5 begin_task: Level: (5) ID = <10122> Status = 0 0 0 0 ok 2008-Apr-30 18:43:46 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-30 18:43:46 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-30 18:43:46 LOG5 end_task: Level: (5) ID = <10122> Status = 0 0 0 0 ok 2008-Apr-30 18:43:46 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-30 18:43:46 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-30 18:43:46 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-30 18:43:46 LOG5 finish_task: Level: (4) ID = <10119> Status = 0 0 0 0 ok 2008-Apr-30 18:43:46 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-30 18:43:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 18:43:46 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-30 18:43:46 LOG5 end_task: Level: (4) ID = <10119> Status = 0 0 0 0 ok 2008-Apr-30 18:43:46 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-30 18:43:46 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-30 18:43:46 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-30 18:43:46 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-30 18:43:46 LOG5 begin_task: Level: (4) ID = <10123> Status = 0 0 0 0 ok 2008-Apr-30 18:43:46 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-30 18:43:46 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-30 18:43:46 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-30 18:43:46 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-30 18:43:46 LOG5 end_task: Level: (4) ID = <10123> Status = 0 0 0 0 ok 2008-Apr-30 18:43:46 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-30 18:43:46 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-30 18:43:46 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-30 18:43:46 LOG5 begin_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2008-Apr-30 18:43:46 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-30 18:43:46 LOG5 log_alfabeam: Parameters: 9.8673611111111121 23.55905555555556 8.894900 2008.3334165145639 -50.300037 2008-Apr-30 18:43:46 LOG4 log_alfabeam: ALFABEAM 0 9.867361111111109 23.559055555555556 2008-Apr-30 18:43:46 LOG4 log_alfabeam: ALFABEAM 1 9.868108244615430 23.467811737414237 2008-Apr-30 18:43:46 LOG4 log_alfabeam: ALFABEAM 2 9.874343343508958 23.528325264688796 2008-Apr-30 18:43:46 LOG4 log_alfabeam: ALFABEAM 3 9.873572782345954 23.620126337672286 2008-Apr-30 18:43:46 LOG4 log_alfabeam: ALFABEAM 4 9.866570603693686 23.650337786023325 2008-Apr-30 18:43:46 LOG4 log_alfabeam: ALFABEAM 5 9.860374193433991 23.589037411708066 2008-Apr-30 18:43:46 LOG4 log_alfabeam: ALFABEAM 6 9.861141103904167 23.498311382906905 2008-Apr-30 18:43:46 INFO2 take_spectra: Starting WAPP scan: 812100099 2008-Apr-30 18:43:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-30 18:43:46 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-30 18:43:46 LOG5 begin_task: Level: (5) ID = <10125> Status = 0 0 0 0 ok 2008-Apr-30 18:43:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-30 18:43:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.755 < 0.8)! 2008-Apr-30 18:43:46 LOG4 check_wapp_levels: WAPP-1 power levels: 0.945 0.755 1.113 1.033 2008-Apr-30 18:43:46 LOG4 check_wapp_levels: WAPP-2 power levels: 0.998 0.920 0.937 1.035 2008-Apr-30 18:43:46 LOG4 check_wapp_levels: WAPP-3 power levels: 1.111 0.904 1.019 0.898 2008-Apr-30 18:43:46 LOG4 check_wapp_levels: WAPP-4 power levels: 1.040 1.010 0.905 0.898 2008-Apr-30 18:43:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81827.00 2008-Apr-30 18:43:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.112919 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-30 18:43:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.112919 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:43:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.112919 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:43:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.112919 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-30 18:43:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.112919 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:43:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.112919 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:43:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.112919 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:43:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.112919 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:43:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.112919 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:43:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-30 18:43:52 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-30 18:43:52 LOG5 end_task: Level: (5) ID = <10125> Status = 0 0 0 0 ok 2008-Apr-30 18:43:52 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-30 18:43:52 LOG5 end_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2008-Apr-30 18:43:52 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-30 18:43:52 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-30 18:43:52 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-30 18:43:52 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-30 18:43:52 LOG5 begin_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2008-Apr-30 18:43:52 INFO5 check_wapp_levels: WAPP power levels are between 0.755 and 1.113 (still bad) 2008-Apr-30 18:43:52 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-30 18:43:52 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-30 18:43:52 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-30 18:43:52 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-30 18:43:52 LOG5 end_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2008-Apr-30 18:43:52 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-30 18:43:52 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-30 18:43:52 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-30 18:43:52 LOG5 begin_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2008-Apr-30 18:43:52 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-30 18:43:52 LOG5 log_alfabeam: Parameters: 9.8673611111111121 23.55905555555556 8.896849 2008.3334167363805 -50.300037 2008-Apr-30 18:43:52 LOG4 log_alfabeam: ALFABEAM 0 9.867361111111105 23.559055555555563 2008-Apr-30 18:43:52 LOG4 log_alfabeam: ALFABEAM 1 9.868113200857792 23.467819538601084 2008-Apr-30 18:43:52 LOG4 log_alfabeam: ALFABEAM 2 9.874345024972573 23.528396966913395 2008-Apr-30 18:43:52 LOG4 log_alfabeam: ALFABEAM 3 9.873569422173295 23.620190999120311 2008-Apr-30 18:43:52 LOG4 log_alfabeam: ALFABEAM 4 9.866565561403652 23.650329606298893 2008-Apr-30 18:43:52 LOG4 log_alfabeam: ALFABEAM 5 9.860372553462263 23.588964425828870 2008-Apr-30 18:43:52 LOG4 log_alfabeam: ALFABEAM 6 9.861144420417885 23.498247330897041 2008-Apr-30 18:43:52 INFO2 take_spectra: Starting WAPP scan: 812100100 2008-Apr-30 18:43:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-30 18:43:53 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-30 18:43:53 LOG5 begin_task: Level: (5) ID = <10128> Status = 0 0 0 0 ok 2008-Apr-30 18:43:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-30 18:43:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81834.00 2008-Apr-30 18:43:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.112919 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-30 18:43:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.112919 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:43:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.112919 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:43:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.112919 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-30 18:43:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.112919 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:43:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.112919 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:43:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.112919 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:43:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.112919 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:43:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.112919 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:43:59 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-30 18:43:59 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-30 18:43:59 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-30 18:43:59 LOG5 end_task: Level: (5) ID = <10128> Status = 0 0 0 0 ok 2008-Apr-30 18:43:59 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-30 18:43:59 LOG5 end_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2008-Apr-30 18:43:59 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-30 18:43:59 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-30 18:43:59 LOG5 finish_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2008-Apr-30 18:43:59 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-30 18:43:59 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 18:43:59 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-30 18:43:59 LOG5 end_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2008-Apr-30 18:43:59 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-30 18:43:59 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 246.90 and ZA = 14.70 2008-Apr-30 18:43:59 LOG3 track_source: Calling 'track_source AGES3193_p1_014 246.90 14.6985378570 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-30 18:43:59 START begin_task: Starting task 'sending tracking commands' 2008-Apr-30 18:43:59 LOG5 begin_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2008-Apr-30 18:43:59 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p1_014} INFO {Slewing to source 'AGES3193_p1_014' ...} 2008-Apr-30 18:43:59 INFO1 track_source: Starting to track AGES3193_p1_014 2008-Apr-30 18:43:59 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p1_014" 2008-Apr-30 18:43:59 LOG3 vw_send: To DATATAKING: set ra 246.90 2008-Apr-30 18:43:59 LOG3 vw_send: To DATATAKING: set dec 14.6985378570 2008-Apr-30 18:43:59 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-30 18:43:59 LOG3 vw_send: To DATATAKING: pnt tr 246.90 14.6985378570 -CF 2008-Apr-30 18:43:59 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-30 18:43:59 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-30 18:43:59 LOG5 finish_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2008-Apr-30 18:43:59 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-30 18:43:59 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 18:44:00 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-30 18:44:00 LOG5 end_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2008-Apr-30 18:44:00 LOG1 fixed_driftmap: Parameters: HA = -00:58:59.1 Start = 08:54:30.2 LST = 08:53:55.7 diff = 34.6 secs 2008-Apr-30 18:44:00 INFO2 fixed_driftmap: Waiting 32.6 seconds for RA 9:53:29 2008-Apr-30 18:44:00 INFO2 lstwait: Waiting for 32.5 secs from LST 08:53:56 to LST 08:54:28 ... 2008-Apr-30 18:44:00 LOG4 send_obs_status: To obs_status: <1> TASKTIME 32.482092355305845 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-30 18:44:00 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-30 18:44:00 LOG5 begin_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2008-Apr-30 18:44:00 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p1_014" 2008-Apr-30 18:44:00 INFO5 check_wapp_levels: WAPP power levels are between 0.920 and 1.542 (still bad) 2008-Apr-30 18:44:00 LOG4 got_cormsg: From DATATAKING: set ra 246.90 2008-Apr-30 18:44:00 LOG4 got_cormsg: From DATATAKING: set dec 14.6985378570 2008-Apr-30 18:44:00 LOG4 got_cormsg: From DATATAKING: vw% 246.90 2008-Apr-30 18:44:00 LOG4 got_cormsg: From DATATAKING: vw% 14.6985378570 2008-Apr-30 18:44:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:44:00 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-30 18:44:00 LOG4 got_cormsg: From DATATAKING: pnt tr 246.90 14.6985378570 -CF 2008-Apr-30 18:44:00 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-30 18:44:00 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-30 18:44:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 18:44:32 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-30 18:44:32 LOG5 end_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2008-Apr-30 18:44:32 LOG4 lstwait: Finished waiting, the gui caused difference: 0.52017572000195855 2008-Apr-30 18:44:32 INFO3 lstwait: Finished waiting 2008-Apr-30 18:44:32 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-30 18:44:32 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-30 18:44:32 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-30 18:44:32 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-30 18:44:32 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-30 18:44:32 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-30 18:44:32 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-30 18:44:32 LOG5 begin_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2008-Apr-30 18:44:32 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-30 18:44:32 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-30 18:44:32 INFO2 take_spectra: Starting WAPP scan: 812100101 2008-Apr-30 18:44:33 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-30 18:44:33 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-30 18:44:33 LOG5 begin_task: Level: (4) ID = <10132> Status = 0 0 0 0 ok 2008-Apr-30 18:44:33 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-30 18:44:33 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81874.00 2008-Apr-30 18:44:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.112919 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-30 18:44:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.112919 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:44:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.112919 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:44:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.112919 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-30 18:44:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.112919 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 18:44:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.112919 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:44:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.112919 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:44:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.112919 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:44:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.112919 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 18:44:35 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.875 and 1.117 2008-Apr-30 18:44:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.791 < 0.8)! 2008-Apr-30 18:44:39 LOG4 check_wapp_levels: WAPP-1 power levels: 0.952 0.791 1.117 1.035 2008-Apr-30 18:44:39 LOG4 check_wapp_levels: WAPP-2 power levels: 0.998 0.922 0.939 1.035 2008-Apr-30 18:44:39 LOG4 check_wapp_levels: WAPP-3 power levels: 1.121 0.910 1.019 0.898 2008-Apr-30 18:44:39 LOG4 check_wapp_levels: WAPP-4 power levels: 1.040 1.009 0.904 0.898 2008-Apr-30 18:44:41 INFO5 check_wapp_levels: WAPP power levels are between 0.685 and 1.122 (still bad) 2008-Apr-30 18:44:43 INFO5 check_wapp_levels: WAPP power levels are between 0.669 and 1.123 (still bad) 2008-Apr-30 18:44:45 INFO5 check_wapp_levels: WAPP power levels are between 0.669 and 1.125 (still bad) 2008-Apr-30 18:44:47 INFO5 check_wapp_levels: WAPP power levels are between 0.665 and 1.123 (still bad) 2008-Apr-30 18:44:49 INFO5 check_wapp_levels: WAPP power levels are between 0.672 and 1.122 (still bad) 2008-Apr-30 18:44:51 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.820 and 1.119 2008-Apr-30 18:44:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.762 < 0.8)! 2008-Apr-30 18:44:55 LOG4 check_wapp_levels: WAPP-1 power levels: 0.954 0.762 1.117 1.036 2008-Apr-30 18:44:55 LOG4 check_wapp_levels: WAPP-2 power levels: 1.001 0.921 0.940 1.035 2008-Apr-30 18:44:55 LOG4 check_wapp_levels: WAPP-3 power levels: 1.116 0.908 1.016 0.899 2008-Apr-30 18:44:55 LOG4 check_wapp_levels: WAPP-4 power levels: 1.039 1.009 0.904 0.898 2008-Apr-30 18:44:57 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.814 and 1.118 2008-Apr-30 18:45:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.715 < 0.8)! 2008-Apr-30 18:45:01 LOG4 check_wapp_levels: WAPP-1 power levels: 0.956 0.715 1.120 1.037 2008-Apr-30 18:45:01 LOG4 check_wapp_levels: WAPP-2 power levels: 1.000 0.921 0.941 1.036 2008-Apr-30 18:45:01 LOG4 check_wapp_levels: WAPP-3 power levels: 1.115 0.907 1.021 0.901 2008-Apr-30 18:45:01 LOG4 check_wapp_levels: WAPP-4 power levels: 1.039 1.011 0.905 0.900 2008-Apr-30 18:45:03 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.824 and 1.119 2008-Apr-30 18:45:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.759 < 0.8)! 2008-Apr-30 18:45:07 LOG4 check_wapp_levels: WAPP-1 power levels: 0.950 0.759 1.119 1.037 2008-Apr-30 18:45:07 LOG4 check_wapp_levels: WAPP-2 power levels: 1.001 0.923 0.941 1.037 2008-Apr-30 18:45:07 LOG4 check_wapp_levels: WAPP-3 power levels: 1.116 0.907 1.020 0.903 2008-Apr-30 18:45:07 LOG4 check_wapp_levels: WAPP-4 power levels: 1.041 1.011 0.906 0.900 2008-Apr-30 18:45:09 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.900 and 1.120 2008-Apr-30 18:45:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.776 < 0.8)! 2008-Apr-30 18:45:23 LOG4 check_wapp_levels: WAPP-1 power levels: 0.958 0.776 1.122 1.039 2008-Apr-30 18:45:23 LOG4 check_wapp_levels: WAPP-2 power levels: 1.002 0.923 0.942 1.037 2008-Apr-30 18:45:23 LOG4 check_wapp_levels: WAPP-3 power levels: 1.117 0.908 1.021 0.901 2008-Apr-30 18:45:23 LOG4 check_wapp_levels: WAPP-4 power levels: 1.043 1.012 0.908 0.901 2008-Apr-30 18:45:25 INFO5 check_wapp_levels: WAPP power levels are between 0.683 and 1.121 (still bad) 2008-Apr-30 18:45:27 INFO5 check_wapp_levels: WAPP power levels are between 0.661 and 1.122 (still bad) 2008-Apr-30 18:45:29 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.810 and 1.121 2008-Apr-30 18:45:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.640 < 0.8)! 2008-Apr-30 18:45:32 LOG4 check_wapp_levels: WAPP-1 power levels: 0.958 0.640 1.122 1.039 2008-Apr-30 18:45:32 LOG4 check_wapp_levels: WAPP-2 power levels: 1.003 0.925 0.942 1.038 2008-Apr-30 18:45:32 LOG4 check_wapp_levels: WAPP-3 power levels: 1.118 0.910 1.024 0.904 2008-Apr-30 18:45:32 LOG4 check_wapp_levels: WAPP-4 power levels: 1.044 1.013 0.908 0.901 2008-Apr-30 18:45:34 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.863 and 1.124 2008-Apr-30 18:45:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.698 < 0.8)! 2008-Apr-30 18:45:36 LOG4 check_wapp_levels: WAPP-1 power levels: 0.958 0.698 1.125 1.041 2008-Apr-30 18:45:36 LOG4 check_wapp_levels: WAPP-2 power levels: 1.004 0.928 0.942 1.039 2008-Apr-30 18:45:36 LOG4 check_wapp_levels: WAPP-3 power levels: 1.122 0.912 1.024 0.904 2008-Apr-30 18:45:36 LOG4 check_wapp_levels: WAPP-4 power levels: 1.044 1.015 0.909 0.903 2008-Apr-30 18:45:38 INFO5 check_wapp_levels: WAPP power levels are between 0.780 and 1.125 (still bad) 2008-Apr-30 18:45:40 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.902 and 1.124 2008-Apr-30 18:45:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.569 < 0.8)! 2008-Apr-30 18:45:46 LOG4 check_wapp_levels: WAPP-1 power levels: 0.958 0.569 1.125 1.042 2008-Apr-30 18:45:46 LOG4 check_wapp_levels: WAPP-2 power levels: 1.006 0.927 0.943 1.039 2008-Apr-30 18:45:46 LOG4 check_wapp_levels: WAPP-3 power levels: 1.123 0.913 1.023 0.903 2008-Apr-30 18:45:46 LOG4 check_wapp_levels: WAPP-4 power levels: 1.044 1.014 0.908 0.902 2008-Apr-30 18:45:48 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.878 and 1.124 2008-Apr-30 18:45:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.773 < 0.8)! 2008-Apr-30 18:45:58 LOG4 check_wapp_levels: WAPP-1 power levels: 0.958 0.773 1.124 1.041 2008-Apr-30 18:45:58 LOG4 check_wapp_levels: WAPP-2 power levels: 1.004 0.924 0.945 1.040 2008-Apr-30 18:45:58 LOG4 check_wapp_levels: WAPP-3 power levels: 1.112 0.907 1.023 0.902 2008-Apr-30 18:45:58 LOG4 check_wapp_levels: WAPP-4 power levels: 1.042 1.015 0.908 0.902 2008-Apr-30 18:46:00 INFO5 check_wapp_levels: WAPP power levels are between 0.746 and 1.123 (still bad) 2008-Apr-30 18:46:02 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.837 and 1.119 2008-Apr-30 18:46:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.756 < 0.8)! 2008-Apr-30 18:46:06 LOG4 check_wapp_levels: WAPP-1 power levels: 0.955 0.756 1.118 1.036 2008-Apr-30 18:46:06 LOG4 check_wapp_levels: WAPP-2 power levels: 0.998 0.919 0.938 1.033 2008-Apr-30 18:46:06 LOG4 check_wapp_levels: WAPP-3 power levels: 1.105 0.902 1.018 0.898 2008-Apr-30 18:46:06 LOG4 check_wapp_levels: WAPP-4 power levels: 1.036 1.009 0.903 0.897 2008-Apr-30 18:46:08 INFO5 check_wapp_levels: WAPP power levels are between 0.755 and 1.118 (still bad) 2008-Apr-30 18:46:10 INFO5 check_wapp_levels: WAPP power levels are between 0.754 and 1.116 (still bad) 2008-Apr-30 18:46:12 INFO5 check_wapp_levels: WAPP power levels are between 0.751 and 1.117 (still bad) 2008-Apr-30 18:46:14 INFO5 check_wapp_levels: WAPP power levels are between 0.751 and 1.116 (still bad) 2008-Apr-30 18:46:16 INFO5 check_wapp_levels: WAPP power levels are between 0.749 and 1.117 (still bad) 2008-Apr-30 18:46:18 INFO5 check_wapp_levels: WAPP power levels are between 0.749 and 1.116 (still bad) 2008-Apr-30 18:46:20 INFO5 check_wapp_levels: WAPP power levels are between 0.751 and 1.117 (still bad) 2008-Apr-30 18:46:22 INFO5 check_wapp_levels: WAPP power levels are between 0.750 and 1.117 (still bad) 2008-Apr-30 18:46:24 INFO5 check_wapp_levels: WAPP power levels are between 0.750 and 1.116 (still bad) 2008-Apr-30 18:46:26 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.850 and 1.116 2008-Apr-30 18:46:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.712 < 0.8)! 2008-Apr-30 18:46:32 LOG4 check_wapp_levels: WAPP-1 power levels: 0.949 0.712 1.117 1.036 2008-Apr-30 18:46:32 LOG4 check_wapp_levels: WAPP-2 power levels: 0.998 0.920 0.938 1.032 2008-Apr-30 18:46:32 LOG4 check_wapp_levels: WAPP-3 power levels: 1.104 0.901 1.016 0.896 2008-Apr-30 18:46:32 LOG4 check_wapp_levels: WAPP-4 power levels: 1.036 1.008 0.902 0.897 2008-Apr-30 18:46:34 INFO5 check_wapp_levels: WAPP power levels are between 0.783 and 1.119 (still bad) 2008-Apr-30 18:46:36 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.827 and 1.119 2008-Apr-30 18:46:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.733 < 0.8)! 2008-Apr-30 18:46:40 LOG4 check_wapp_levels: WAPP-1 power levels: 0.951 0.733 1.117 1.036 2008-Apr-30 18:46:40 LOG4 check_wapp_levels: WAPP-2 power levels: 1.002 0.919 0.940 1.033 2008-Apr-30 18:46:40 LOG4 check_wapp_levels: WAPP-3 power levels: 1.103 0.899 1.018 0.896 2008-Apr-30 18:46:40 LOG4 check_wapp_levels: WAPP-4 power levels: 1.035 1.008 0.902 0.898 2008-Apr-30 18:46:42 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.896 and 1.117 2008-Apr-30 18:46:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.740 < 0.8)! 2008-Apr-30 18:46:44 LOG4 check_wapp_levels: WAPP-1 power levels: 0.950 0.740 1.118 1.035 2008-Apr-30 18:46:44 LOG4 check_wapp_levels: WAPP-2 power levels: 1.002 0.919 0.940 1.034 2008-Apr-30 18:46:44 LOG4 check_wapp_levels: WAPP-3 power levels: 1.103 0.900 1.015 0.896 2008-Apr-30 18:46:44 LOG4 check_wapp_levels: WAPP-4 power levels: 1.036 1.008 0.903 0.896 2008-Apr-30 18:46:46 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.896 and 1.117 2008-Apr-30 18:46:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.797 < 0.8)! 2008-Apr-30 18:46:50 LOG4 check_wapp_levels: WAPP-1 power levels: 0.944 0.797 1.117 1.037 2008-Apr-30 18:46:50 LOG4 check_wapp_levels: WAPP-2 power levels: 0.999 0.919 0.940 1.035 2008-Apr-30 18:46:50 LOG4 check_wapp_levels: WAPP-3 power levels: 1.104 0.899 1.016 0.895 2008-Apr-30 18:46:50 LOG4 check_wapp_levels: WAPP-4 power levels: 1.035 1.010 0.902 0.898 2008-Apr-30 18:46:52 INFO5 check_wapp_levels: WAPP power levels are between 0.695 and 1.118 (still bad) 2008-Apr-30 18:46:54 INFO5 check_wapp_levels: WAPP power levels are between 0.760 and 1.118 (still bad) 2008-Apr-30 18:46:57 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.896 and 1.118 2008-Apr-30 18:46:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.785 < 0.8)! 2008-Apr-30 18:46:59 LOG4 check_wapp_levels: WAPP-1 power levels: 0.946 0.785 1.119 1.037 2008-Apr-30 18:46:59 LOG4 check_wapp_levels: WAPP-2 power levels: 1.000 0.921 0.939 1.034 2008-Apr-30 18:46:59 LOG4 check_wapp_levels: WAPP-3 power levels: 1.101 0.899 1.014 0.895 2008-Apr-30 18:46:59 LOG4 check_wapp_levels: WAPP-4 power levels: 1.036 1.008 0.902 0.897 2008-Apr-30 18:47:01 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.889 and 1.119 2008-Apr-30 18:47:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.587 < 0.8)! 2008-Apr-30 18:47:03 LOG4 check_wapp_levels: WAPP-1 power levels: 0.950 0.587 1.118 1.038 2008-Apr-30 18:47:03 LOG4 check_wapp_levels: WAPP-2 power levels: 1.005 0.922 0.939 1.034 2008-Apr-30 18:47:03 LOG4 check_wapp_levels: WAPP-3 power levels: 1.102 0.899 1.016 0.894 2008-Apr-30 18:47:03 LOG4 check_wapp_levels: WAPP-4 power levels: 1.036 1.009 0.902 0.898 2008-Apr-30 18:47:05 INFO5 check_wapp_levels: WAPP power levels are between 0.625 and 1.118 (still bad) 2008-Apr-30 18:47:07 INFO5 check_wapp_levels: WAPP power levels are between 0.720 and 1.118 (still bad) 2008-Apr-30 18:47:09 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.895 and 1.118 2008-Apr-30 18:47:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.755 < 0.8)! 2008-Apr-30 18:47:15 LOG4 check_wapp_levels: WAPP-1 power levels: 0.951 0.755 1.119 1.038 2008-Apr-30 18:47:15 LOG4 check_wapp_levels: WAPP-2 power levels: 1.002 0.923 0.947 1.042 2008-Apr-30 18:47:15 LOG4 check_wapp_levels: WAPP-3 power levels: 1.103 0.897 1.016 0.893 2008-Apr-30 18:47:15 LOG4 check_wapp_levels: WAPP-4 power levels: 1.035 1.009 0.901 0.898 2008-Apr-30 18:47:17 INFO5 check_wapp_levels: WAPP power levels are between 0.770 and 1.119 (still bad) 2008-Apr-30 18:47:19 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.894 and 1.118 2008-Apr-30 18:47:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.715 < 0.8)! 2008-Apr-30 18:47:27 LOG4 check_wapp_levels: WAPP-1 power levels: 0.971 0.715 1.117 1.037 2008-Apr-30 18:47:27 LOG4 check_wapp_levels: WAPP-2 power levels: 0.996 0.917 0.940 1.034 2008-Apr-30 18:47:27 LOG4 check_wapp_levels: WAPP-3 power levels: 1.102 0.898 1.017 0.894 2008-Apr-30 18:47:27 LOG4 check_wapp_levels: WAPP-4 power levels: 1.036 1.008 0.902 0.896 2008-Apr-30 18:47:29 INFO5 check_wapp_levels: WAPP power levels are between 0.785 and 1.118 (still bad) 2008-Apr-30 18:47:31 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.894 and 1.118 2008-Apr-30 18:47:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.775 < 0.8)! 2008-Apr-30 18:47:35 LOG4 check_wapp_levels: WAPP-1 power levels: 0.975 0.775 1.118 1.034 2008-Apr-30 18:47:35 LOG4 check_wapp_levels: WAPP-2 power levels: 0.999 0.918 0.937 1.033 2008-Apr-30 18:47:35 LOG4 check_wapp_levels: WAPP-3 power levels: 1.110 0.905 1.016 0.893 2008-Apr-30 18:47:35 LOG4 check_wapp_levels: WAPP-4 power levels: 1.037 1.010 0.902 0.899 2008-Apr-30 18:47:37 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.867 and 1.117 2008-Apr-30 18:47:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.754 < 0.8)! 2008-Apr-30 18:47:41 LOG4 check_wapp_levels: WAPP-1 power levels: 0.959 0.754 1.116 1.035 2008-Apr-30 18:47:41 LOG4 check_wapp_levels: WAPP-2 power levels: 1.000 0.917 0.939 1.032 2008-Apr-30 18:47:41 LOG4 check_wapp_levels: WAPP-3 power levels: 1.112 0.905 1.015 0.893 2008-Apr-30 18:47:41 LOG4 check_wapp_levels: WAPP-4 power levels: 1.037 1.012 0.903 0.900 2008-Apr-30 18:47:43 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.872 and 1.117 2008-Apr-30 18:47:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.641 < 0.8)! 2008-Apr-30 18:47:47 LOG4 check_wapp_levels: WAPP-1 power levels: 0.951 0.641 1.116 1.035 2008-Apr-30 18:47:47 LOG4 check_wapp_levels: WAPP-2 power levels: 0.999 0.918 0.937 1.032 2008-Apr-30 18:47:47 LOG4 check_wapp_levels: WAPP-3 power levels: 1.107 0.901 1.019 0.898 2008-Apr-30 18:47:47 LOG4 check_wapp_levels: WAPP-4 power levels: 1.038 1.011 0.904 0.899 2008-Apr-30 18:47:49 INFO5 check_wapp_levels: WAPP power levels are between 0.700 and 1.116 (still bad) 2008-Apr-30 18:47:51 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.899 and 1.117 2008-Apr-30 18:47:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.722 < 0.8)! 2008-Apr-30 18:47:59 LOG4 check_wapp_levels: WAPP-1 power levels: 0.948 0.722 1.117 1.035 2008-Apr-30 18:47:59 LOG4 check_wapp_levels: WAPP-2 power levels: 1.000 0.916 0.937 1.032 2008-Apr-30 18:47:59 LOG4 check_wapp_levels: WAPP-3 power levels: 1.104 0.900 1.033 0.909 2008-Apr-30 18:47:59 LOG4 check_wapp_levels: WAPP-4 power levels: 1.037 1.011 0.903 0.900 2008-Apr-30 18:48:01 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.899 and 1.117 2008-Apr-30 18:48:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.720 < 0.8)! 2008-Apr-30 18:48:05 LOG4 check_wapp_levels: WAPP-1 power levels: 0.949 0.720 1.118 1.036 2008-Apr-30 18:48:05 LOG4 check_wapp_levels: WAPP-2 power levels: 1.000 0.917 0.937 1.032 2008-Apr-30 18:48:05 LOG4 check_wapp_levels: WAPP-3 power levels: 1.105 0.900 1.028 0.903 2008-Apr-30 18:48:05 LOG4 check_wapp_levels: WAPP-4 power levels: 1.038 1.011 0.903 0.900 2008-Apr-30 18:48:07 INFO5 check_wapp_levels: WAPP power levels are between 0.789 and 1.116 (still bad) 2008-Apr-30 18:48:09 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.899 and 1.117 2008-Apr-30 18:48:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.695 < 0.8)! 2008-Apr-30 18:48:30 LOG4 check_wapp_levels: WAPP-1 power levels: 0.949 0.695 1.116 1.035 2008-Apr-30 18:48:30 LOG4 check_wapp_levels: WAPP-2 power levels: 0.999 0.919 0.938 1.033 2008-Apr-30 18:48:30 LOG4 check_wapp_levels: WAPP-3 power levels: 1.105 0.900 1.018 0.896 2008-Apr-30 18:48:30 LOG4 check_wapp_levels: WAPP-4 power levels: 1.036 1.008 0.901 0.898 2008-Apr-30 18:48:32 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.897 and 1.147 2008-Apr-30 18:48:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.728 < 0.8)! 2008-Apr-30 18:48:36 LOG4 check_wapp_levels: WAPP-1 power levels: 0.946 0.728 1.116 1.036 2008-Apr-30 18:48:36 LOG4 check_wapp_levels: WAPP-2 power levels: 0.998 0.918 0.939 1.032 2008-Apr-30 18:48:36 LOG4 check_wapp_levels: WAPP-3 power levels: 1.106 0.900 1.016 0.896 2008-Apr-30 18:48:36 LOG4 check_wapp_levels: WAPP-4 power levels: 1.037 1.007 0.902 0.898 2008-Apr-30 18:48:38 INFO5 check_wapp_levels: WAPP power levels are between 0.777 and 1.116 (still bad) 2008-Apr-30 18:48:40 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.802 and 1.116 2008-Apr-30 18:48:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.772 < 0.8)! 2008-Apr-30 18:48:42 LOG4 check_wapp_levels: WAPP-1 power levels: 0.946 0.772 1.116 1.036 2008-Apr-30 18:48:42 LOG4 check_wapp_levels: WAPP-2 power levels: 0.998 0.918 0.939 1.033 2008-Apr-30 18:48:42 LOG4 check_wapp_levels: WAPP-3 power levels: 1.106 0.901 1.018 0.896 2008-Apr-30 18:48:42 LOG4 check_wapp_levels: WAPP-4 power levels: 1.037 1.009 0.902 0.898 2008-Apr-30 18:48:44 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.837 and 1.116 2008-Apr-30 18:48:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.708 < 0.8)! 2008-Apr-30 18:48:50 LOG4 check_wapp_levels: WAPP-1 power levels: 0.951 0.708 1.116 1.036 2008-Apr-30 18:48:50 LOG4 check_wapp_levels: WAPP-2 power levels: 1.000 0.919 0.939 1.032 2008-Apr-30 18:48:50 LOG4 check_wapp_levels: WAPP-3 power levels: 1.105 0.901 1.015 0.894 2008-Apr-30 18:48:50 LOG4 check_wapp_levels: WAPP-4 power levels: 1.038 1.007 0.902 0.896 2008-Apr-30 18:48:52 INFO5 check_wapp_levels: WAPP power levels are between 0.686 and 1.117 (still bad) 2008-Apr-30 18:48:54 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.859 and 1.116 2008-Apr-30 18:48:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.603 < 0.8)! 2008-Apr-30 18:48:56 LOG4 check_wapp_levels: WAPP-1 power levels: 0.952 0.603 1.116 1.036 2008-Apr-30 18:48:56 LOG4 check_wapp_levels: WAPP-2 power levels: 0.999 0.919 0.938 1.032 2008-Apr-30 18:48:56 LOG4 check_wapp_levels: WAPP-3 power levels: 1.106 0.903 1.018 0.895 2008-Apr-30 18:48:56 LOG4 check_wapp_levels: WAPP-4 power levels: 1.039 1.009 0.903 0.898 2008-Apr-30 18:48:58 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.820 and 1.116 2008-Apr-30 18:49:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.681 < 0.8)! 2008-Apr-30 18:49:08 LOG4 check_wapp_levels: WAPP-1 power levels: 0.950 0.681 1.117 1.034 2008-Apr-30 18:49:08 LOG4 check_wapp_levels: WAPP-2 power levels: 1.002 0.919 0.939 1.034 2008-Apr-30 18:49:08 LOG4 check_wapp_levels: WAPP-3 power levels: 1.106 0.903 1.015 0.896 2008-Apr-30 18:49:08 LOG4 check_wapp_levels: WAPP-4 power levels: 1.038 1.009 0.903 0.897 2008-Apr-30 18:49:10 INFO5 check_wapp_levels: WAPP power levels are between 0.679 and 1.118 (still bad) 2008-Apr-30 18:49:12 INFO5 check_wapp_levels: WAPP power levels are between 0.561 and 1.116 (still bad) 2008-Apr-30 18:49:14 INFO5 check_wapp_levels: WAPP power levels are between 0.576 and 1.117 (still bad) 2008-Apr-30 18:49:16 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.117 (still bad) 2008-Apr-30 18:49:18 INFO5 check_wapp_levels: WAPP power levels are between 0.534 and 1.115 (still bad) 2008-Apr-30 18:49:20 INFO5 check_wapp_levels: WAPP power levels are between 0.799 and 1.121 (still bad) 2008-Apr-30 18:49:22 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.842 and 1.122 2008-Apr-30 18:49:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.699 < 0.8)! 2008-Apr-30 18:49:24 LOG4 check_wapp_levels: WAPP-1 power levels: 0.950 0.699 1.122 1.040 2008-Apr-30 18:49:24 LOG4 check_wapp_levels: WAPP-2 power levels: 1.006 0.923 0.944 1.039 2008-Apr-30 18:49:24 LOG4 check_wapp_levels: WAPP-3 power levels: 1.115 0.907 1.020 0.903 2008-Apr-30 18:49:24 LOG4 check_wapp_levels: WAPP-4 power levels: 1.045 1.015 0.908 0.903 2008-Apr-30 18:49:26 INFO5 check_wapp_levels: WAPP power levels are between 0.717 and 1.121 (still bad) 2008-Apr-30 18:49:28 INFO5 check_wapp_levels: WAPP power levels are between 0.619 and 1.121 (still bad) 2008-Apr-30 18:49:30 INFO5 check_wapp_levels: WAPP power levels are between 0.755 and 1.122 (still bad) 2008-Apr-30 18:49:32 INFO5 check_wapp_levels: WAPP power levels are between 0.753 and 1.122 (still bad) 2008-Apr-30 18:49:34 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.879 and 1.123 2008-Apr-30 18:49:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.712 < 0.8)! 2008-Apr-30 18:49:36 LOG4 check_wapp_levels: WAPP-1 power levels: 0.953 0.712 1.123 1.041 2008-Apr-30 18:49:36 LOG4 check_wapp_levels: WAPP-2 power levels: 1.005 0.925 0.945 1.039 2008-Apr-30 18:49:36 LOG4 check_wapp_levels: WAPP-3 power levels: 1.117 0.908 1.024 0.904 2008-Apr-30 18:49:36 LOG4 check_wapp_levels: WAPP-4 power levels: 1.046 1.016 0.909 0.904 2008-Apr-30 18:49:38 INFO5 check_wapp_levels: WAPP power levels are between 0.653 and 1.123 (still bad) 2008-Apr-30 18:49:40 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.829 and 1.123 2008-Apr-30 18:49:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.752 < 0.8)! 2008-Apr-30 18:49:45 LOG4 check_wapp_levels: WAPP-1 power levels: 0.952 0.752 1.123 1.039 2008-Apr-30 18:49:45 LOG4 check_wapp_levels: WAPP-2 power levels: 1.006 0.923 0.945 1.039 2008-Apr-30 18:49:45 LOG4 check_wapp_levels: WAPP-3 power levels: 1.116 0.908 1.023 0.903 2008-Apr-30 18:49:45 LOG4 check_wapp_levels: WAPP-4 power levels: 1.046 1.017 0.909 0.905 2008-Apr-30 18:49:47 INFO5 check_wapp_levels: WAPP power levels are between 0.611 and 1.124 (still bad) 2008-Apr-30 18:49:49 INFO5 check_wapp_levels: WAPP power levels are between 0.639 and 1.124 (still bad) 2008-Apr-30 18:49:51 INFO5 check_wapp_levels: WAPP power levels are between 0.640 and 1.122 (still bad) 2008-Apr-30 18:49:53 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.836 and 1.121 2008-Apr-30 18:50:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.643 < 0.8)! 2008-Apr-30 18:50:05 LOG4 check_wapp_levels: WAPP-1 power levels: 0.947 0.643 1.119 1.036 2008-Apr-30 18:50:05 LOG4 check_wapp_levels: WAPP-2 power levels: 1.000 0.920 0.941 1.034 2008-Apr-30 18:50:05 LOG4 check_wapp_levels: WAPP-3 power levels: 1.109 0.905 1.017 0.897 2008-Apr-30 18:50:05 LOG4 check_wapp_levels: WAPP-4 power levels: 1.042 1.010 0.905 0.898 2008-Apr-30 18:50:07 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.829 and 1.119 2008-Apr-30 18:50:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.738 < 0.8)! 2008-Apr-30 18:50:09 LOG4 check_wapp_levels: WAPP-1 power levels: 0.948 0.738 1.118 1.035 2008-Apr-30 18:50:09 LOG4 check_wapp_levels: WAPP-2 power levels: 1.000 0.919 0.939 1.034 2008-Apr-30 18:50:09 LOG4 check_wapp_levels: WAPP-3 power levels: 1.110 0.905 1.019 0.897 2008-Apr-30 18:50:09 LOG4 check_wapp_levels: WAPP-4 power levels: 1.042 1.011 0.905 0.900 2008-Apr-30 18:50:11 INFO5 check_wapp_levels: WAPP power levels are between 0.785 and 1.117 (still bad) 2008-Apr-30 18:50:13 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.895 and 1.117 2008-Apr-30 18:50:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.740 < 0.8)! 2008-Apr-30 18:50:23 LOG4 check_wapp_levels: WAPP-1 power levels: 0.954 0.740 1.119 1.038 2008-Apr-30 18:50:23 LOG4 check_wapp_levels: WAPP-2 power levels: 1.000 0.920 0.939 1.034 2008-Apr-30 18:50:23 LOG4 check_wapp_levels: WAPP-3 power levels: 1.112 0.907 1.019 0.899 2008-Apr-30 18:50:23 LOG4 check_wapp_levels: WAPP-4 power levels: 1.042 1.010 0.905 0.899 2008-Apr-30 18:50:25 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.897 and 1.118 2008-Apr-30 18:50:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.691 < 0.8)! 2008-Apr-30 18:50:31 LOG4 check_wapp_levels: WAPP-1 power levels: 0.950 0.691 1.120 1.038 2008-Apr-30 18:50:31 LOG4 check_wapp_levels: WAPP-2 power levels: 0.999 0.919 0.940 1.033 2008-Apr-30 18:50:31 LOG4 check_wapp_levels: WAPP-3 power levels: 1.114 0.907 1.018 0.899 2008-Apr-30 18:50:31 LOG4 check_wapp_levels: WAPP-4 power levels: 1.041 1.011 0.904 0.898 2008-Apr-30 18:50:33 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.862 and 1.120 2008-Apr-30 18:50:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.706 < 0.8)! 2008-Apr-30 18:50:35 LOG4 check_wapp_levels: WAPP-1 power levels: 0.947 0.706 1.120 1.037 2008-Apr-30 18:50:35 LOG4 check_wapp_levels: WAPP-2 power levels: 1.000 0.920 0.941 1.034 2008-Apr-30 18:50:35 LOG4 check_wapp_levels: WAPP-3 power levels: 1.111 0.907 1.018 0.900 2008-Apr-30 18:50:35 LOG4 check_wapp_levels: WAPP-4 power levels: 1.040 1.010 0.906 0.899 2008-Apr-30 18:50:37 INFO5 check_wapp_levels: WAPP power levels are between 0.736 and 1.119 (still bad) 2008-Apr-30 18:50:39 INFO5 check_wapp_levels: WAPP power levels are between 0.728 and 1.119 (still bad) 2008-Apr-30 18:50:41 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.814 and 1.119 2008-Apr-30 18:50:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.753 < 0.8)! 2008-Apr-30 18:50:43 LOG4 check_wapp_levels: WAPP-1 power levels: 0.945 0.753 1.120 1.036 2008-Apr-30 18:50:43 LOG4 check_wapp_levels: WAPP-2 power levels: 1.001 0.919 0.941 1.035 2008-Apr-30 18:50:43 LOG4 check_wapp_levels: WAPP-3 power levels: 1.112 0.906 1.018 0.899 2008-Apr-30 18:50:43 LOG4 check_wapp_levels: WAPP-4 power levels: 1.041 1.009 0.906 0.898 2008-Apr-30 18:50:45 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.865 and 1.118 2008-Apr-30 18:50:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.771 < 0.8)! 2008-Apr-30 18:50:47 LOG4 check_wapp_levels: WAPP-1 power levels: 0.947 0.771 1.119 1.039 2008-Apr-30 18:50:47 LOG4 check_wapp_levels: WAPP-2 power levels: 1.000 0.919 0.941 1.035 2008-Apr-30 18:50:47 LOG4 check_wapp_levels: WAPP-3 power levels: 1.112 0.905 1.018 0.900 2008-Apr-30 18:50:47 LOG4 check_wapp_levels: WAPP-4 power levels: 1.041 1.010 0.906 0.899 2008-Apr-30 18:50:49 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.873 and 1.119 2008-Apr-30 18:50:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.779 < 0.8)! 2008-Apr-30 18:50:53 LOG4 check_wapp_levels: WAPP-1 power levels: 0.950 0.779 1.119 1.037 2008-Apr-30 18:50:53 LOG4 check_wapp_levels: WAPP-2 power levels: 1.002 0.920 0.939 1.034 2008-Apr-30 18:50:53 LOG4 check_wapp_levels: WAPP-3 power levels: 1.112 0.905 1.018 0.899 2008-Apr-30 18:50:53 LOG4 check_wapp_levels: WAPP-4 power levels: 1.042 1.010 0.906 0.898 2008-Apr-30 18:50:55 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.899 and 1.120 2008-Apr-30 18:50:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.587 < 0.8)! 2008-Apr-30 18:50:59 LOG4 check_wapp_levels: WAPP-1 power levels: 0.948 0.587 1.118 1.037 2008-Apr-30 18:50:59 LOG4 check_wapp_levels: WAPP-2 power levels: 0.999 0.920 0.940 1.035 2008-Apr-30 18:50:59 LOG4 check_wapp_levels: WAPP-3 power levels: 1.111 0.905 1.018 0.899 2008-Apr-30 18:50:59 LOG4 check_wapp_levels: WAPP-4 power levels: 1.041 1.010 0.906 0.898 2008-Apr-30 18:51:01 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.843 and 1.119 2008-Apr-30 18:51:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.600 < 0.8)! 2008-Apr-30 18:51:06 LOG4 check_wapp_levels: WAPP-1 power levels: 0.948 0.600 1.119 1.039 2008-Apr-30 18:51:06 LOG4 check_wapp_levels: WAPP-2 power levels: 1.001 0.920 0.940 1.035 2008-Apr-30 18:51:06 LOG4 check_wapp_levels: WAPP-3 power levels: 1.113 0.906 1.018 0.900 2008-Apr-30 18:51:06 LOG4 check_wapp_levels: WAPP-4 power levels: 1.040 1.010 0.907 0.899 2008-Apr-30 18:51:08 INFO5 check_wapp_levels: WAPP power levels are between 0.727 and 1.118 (still bad) 2008-Apr-30 18:51:10 INFO5 check_wapp_levels: WAPP power levels are between 0.611 and 1.119 (still bad) 2008-Apr-30 18:51:12 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.875 and 1.119 2008-Apr-30 18:51:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.738 < 0.8)! 2008-Apr-30 18:51:18 LOG4 check_wapp_levels: WAPP-1 power levels: 0.949 0.738 1.118 1.036 2008-Apr-30 18:51:18 LOG4 check_wapp_levels: WAPP-2 power levels: 1.002 0.921 0.941 1.036 2008-Apr-30 18:51:18 LOG4 check_wapp_levels: WAPP-3 power levels: 1.112 0.907 1.018 0.897 2008-Apr-30 18:51:18 LOG4 check_wapp_levels: WAPP-4 power levels: 1.040 1.010 0.905 0.899 2008-Apr-30 18:51:20 INFO5 check_wapp_levels: WAPP power levels are between 0.770 and 1.119 (still bad) 2008-Apr-30 18:51:22 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.836 and 1.119 2008-Apr-30 18:51:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.589 < 0.8)! 2008-Apr-30 18:51:24 LOG4 check_wapp_levels: WAPP-1 power levels: 0.948 0.589 1.118 1.036 2008-Apr-30 18:51:24 LOG4 check_wapp_levels: WAPP-2 power levels: 0.999 0.921 0.941 1.036 2008-Apr-30 18:51:24 LOG4 check_wapp_levels: WAPP-3 power levels: 1.112 0.906 1.018 0.898 2008-Apr-30 18:51:24 LOG4 check_wapp_levels: WAPP-4 power levels: 1.040 1.008 0.906 0.898 2008-Apr-30 18:51:26 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.860 and 1.119 2008-Apr-30 18:51:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.698 < 0.8)! 2008-Apr-30 18:51:28 LOG4 check_wapp_levels: WAPP-1 power levels: 0.946 0.698 1.119 1.036 2008-Apr-30 18:51:28 LOG4 check_wapp_levels: WAPP-2 power levels: 1.001 0.921 0.941 1.037 2008-Apr-30 18:51:28 LOG4 check_wapp_levels: WAPP-3 power levels: 1.110 0.906 1.019 0.897 2008-Apr-30 18:51:28 LOG4 check_wapp_levels: WAPP-4 power levels: 1.039 1.009 0.906 0.899 2008-Apr-30 18:51:30 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.840 and 1.119 2008-Apr-30 18:51:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.762 < 0.8)! 2008-Apr-30 18:51:32 LOG4 check_wapp_levels: WAPP-1 power levels: 0.948 0.762 1.119 1.038 2008-Apr-30 18:51:32 LOG4 check_wapp_levels: WAPP-2 power levels: 1.001 0.922 0.945 1.039 2008-Apr-30 18:51:32 LOG4 check_wapp_levels: WAPP-3 power levels: 1.109 0.904 1.020 0.899 2008-Apr-30 18:51:32 LOG4 check_wapp_levels: WAPP-4 power levels: 1.040 1.010 0.906 0.898 2008-Apr-30 18:51:34 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.898 and 1.120 2008-Apr-30 18:51:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.727 < 0.8)! 2008-Apr-30 18:51:42 LOG4 check_wapp_levels: WAPP-1 power levels: 0.950 0.727 1.119 1.038 2008-Apr-30 18:51:42 LOG4 check_wapp_levels: WAPP-2 power levels: 1.004 0.922 0.945 1.037 2008-Apr-30 18:51:42 LOG4 check_wapp_levels: WAPP-3 power levels: 1.109 0.905 1.016 0.899 2008-Apr-30 18:51:42 LOG4 check_wapp_levels: WAPP-4 power levels: 1.039 1.010 0.906 0.898 2008-Apr-30 18:51:44 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.898 and 1.120 2008-Apr-30 18:51:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.688 < 0.8)! 2008-Apr-30 18:51:54 LOG4 check_wapp_levels: WAPP-1 power levels: 0.952 0.688 1.118 1.038 2008-Apr-30 18:51:54 LOG4 check_wapp_levels: WAPP-2 power levels: 1.006 0.923 0.972 1.073 2008-Apr-30 18:51:54 LOG4 check_wapp_levels: WAPP-3 power levels: 1.109 0.903 1.017 0.898 2008-Apr-30 18:51:54 LOG4 check_wapp_levels: WAPP-4 power levels: 1.037 1.009 0.905 0.897 2008-Apr-30 18:51:56 INFO5 check_wapp_levels: WAPP power levels are between 0.787 and 1.118 (still bad) 2008-Apr-30 18:51:58 INFO5 check_wapp_levels: WAPP power levels are between 0.592 and 1.119 (still bad) 2008-Apr-30 18:52:00 INFO5 check_wapp_levels: WAPP power levels are between 0.665 and 1.120 (still bad) 2008-Apr-30 18:52:02 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.839 and 1.119 2008-Apr-30 18:52:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.642 < 0.8)! 2008-Apr-30 18:52:04 LOG4 check_wapp_levels: WAPP-1 power levels: 0.948 0.642 1.118 1.037 2008-Apr-30 18:52:04 LOG4 check_wapp_levels: WAPP-2 power levels: 1.001 0.920 1.000 1.102 2008-Apr-30 18:52:04 LOG4 check_wapp_levels: WAPP-3 power levels: 1.110 0.907 1.019 0.898 2008-Apr-30 18:52:04 LOG4 check_wapp_levels: WAPP-4 power levels: 1.037 1.012 0.905 0.899 2008-Apr-30 18:52:06 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.886 and 1.119 2008-Apr-30 18:52:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.742 < 0.8)! 2008-Apr-30 18:52:08 LOG4 check_wapp_levels: WAPP-1 power levels: 0.952 0.742 1.119 1.036 2008-Apr-30 18:52:08 LOG4 check_wapp_levels: WAPP-2 power levels: 1.000 0.918 0.981 1.081 2008-Apr-30 18:52:08 LOG4 check_wapp_levels: WAPP-3 power levels: 1.108 0.905 1.019 0.900 2008-Apr-30 18:52:08 LOG4 check_wapp_levels: WAPP-4 power levels: 1.037 1.010 0.904 0.897 2008-Apr-30 18:52:10 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.894 and 1.119 2008-Apr-30 18:52:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.775 < 0.8)! 2008-Apr-30 18:52:12 LOG4 check_wapp_levels: WAPP-1 power levels: 0.949 0.775 1.120 1.036 2008-Apr-30 18:52:12 LOG4 check_wapp_levels: WAPP-2 power levels: 1.001 0.920 0.960 1.057 2008-Apr-30 18:52:12 LOG4 check_wapp_levels: WAPP-3 power levels: 1.108 0.903 1.020 0.900 2008-Apr-30 18:52:12 LOG4 check_wapp_levels: WAPP-4 power levels: 1.039 1.011 0.906 0.897 2008-Apr-30 18:52:14 INFO5 check_wapp_levels: WAPP power levels are between 0.704 and 1.120 (still bad) 2008-Apr-30 18:52:16 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.834 and 1.121 2008-Apr-30 18:52:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.667 < 0.8)! 2008-Apr-30 18:52:18 LOG4 check_wapp_levels: WAPP-1 power levels: 0.947 0.667 1.118 1.037 2008-Apr-30 18:52:18 LOG4 check_wapp_levels: WAPP-2 power levels: 0.999 0.920 0.943 1.036 2008-Apr-30 18:52:18 LOG4 check_wapp_levels: WAPP-3 power levels: 1.135 0.927 1.019 0.901 2008-Apr-30 18:52:18 LOG4 check_wapp_levels: WAPP-4 power levels: 1.037 1.011 0.905 0.898 2008-Apr-30 18:52:20 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.808 and 1.148 2008-Apr-30 18:52:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.705 < 0.8)! 2008-Apr-30 18:52:29 LOG4 check_wapp_levels: WAPP-1 power levels: 0.951 0.705 1.119 1.038 2008-Apr-30 18:52:29 LOG4 check_wapp_levels: WAPP-2 power levels: 1.000 0.919 0.942 1.034 2008-Apr-30 18:52:29 LOG4 check_wapp_levels: WAPP-3 power levels: 1.173 0.957 1.017 0.899 2008-Apr-30 18:52:29 LOG4 check_wapp_levels: WAPP-4 power levels: 1.037 1.010 0.905 0.898 2008-Apr-30 18:52:31 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.867 and 1.163 2008-Apr-30 18:52:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.676 < 0.8)! 2008-Apr-30 18:52:33 LOG4 check_wapp_levels: WAPP-1 power levels: 0.948 0.676 1.121 1.038 2008-Apr-30 18:52:33 LOG4 check_wapp_levels: WAPP-2 power levels: 1.000 0.918 0.943 1.035 2008-Apr-30 18:52:33 LOG4 check_wapp_levels: WAPP-3 power levels: 1.151 0.939 1.017 0.898 2008-Apr-30 18:52:33 LOG4 check_wapp_levels: WAPP-4 power levels: 1.037 1.012 0.905 0.899 2008-Apr-30 18:52:35 INFO5 check_wapp_levels: WAPP power levels are between 0.573 and 1.136 (still bad) 2008-Apr-30 18:52:37 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.898 and 1.123 2008-Apr-30 18:52:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.606 < 0.8)! 2008-Apr-30 18:52:41 LOG4 check_wapp_levels: WAPP-1 power levels: 0.946 0.606 1.120 1.039 2008-Apr-30 18:52:41 LOG4 check_wapp_levels: WAPP-2 power levels: 0.999 0.919 0.942 1.035 2008-Apr-30 18:52:41 LOG4 check_wapp_levels: WAPP-3 power levels: 1.109 0.906 1.025 0.904 2008-Apr-30 18:52:41 LOG4 check_wapp_levels: WAPP-4 power levels: 1.038 1.008 0.905 0.897 2008-Apr-30 18:52:43 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.877 and 1.120 2008-Apr-30 18:52:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.724 < 0.8)! 2008-Apr-30 18:52:45 LOG4 check_wapp_levels: WAPP-1 power levels: 0.948 0.724 1.120 1.039 2008-Apr-30 18:52:45 LOG4 check_wapp_levels: WAPP-2 power levels: 0.999 0.919 0.942 1.034 2008-Apr-30 18:52:45 LOG4 check_wapp_levels: WAPP-3 power levels: 1.108 0.903 1.032 0.909 2008-Apr-30 18:52:45 LOG4 check_wapp_levels: WAPP-4 power levels: 1.039 1.008 0.906 0.897 2008-Apr-30 18:52:47 INFO5 check_wapp_levels: WAPP power levels are between 0.678 and 1.120 (still bad) 2008-Apr-30 18:52:49 INFO5 check_wapp_levels: WAPP power levels are between 0.680 and 1.120 (still bad) 2008-Apr-30 18:52:51 INFO5 check_wapp_levels: WAPP power levels are between 0.725 and 1.119 (still bad) 2008-Apr-30 18:52:53 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.839 and 1.120 2008-Apr-30 18:52:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.794 < 0.8)! 2008-Apr-30 18:52:57 LOG4 check_wapp_levels: WAPP-1 power levels: 0.944 0.794 1.117 1.033 2008-Apr-30 18:52:57 LOG4 check_wapp_levels: WAPP-2 power levels: 1.000 0.918 0.942 1.034 2008-Apr-30 18:52:57 LOG4 check_wapp_levels: WAPP-3 power levels: 1.106 0.904 1.024 0.903 2008-Apr-30 18:52:57 LOG4 check_wapp_levels: WAPP-4 power levels: 1.038 1.010 0.905 0.898 2008-Apr-30 18:52:59 INFO5 check_wapp_levels: WAPP power levels are between 0.795 and 1.119 (still bad) 2008-Apr-30 18:53:01 INFO5 check_wapp_levels: WAPP power levels are between 0.791 and 1.119 (still bad) 2008-Apr-30 18:53:03 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.824 and 1.119 2008-Apr-30 18:53:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.732 < 0.8)! 2008-Apr-30 18:53:05 LOG4 check_wapp_levels: WAPP-1 power levels: 0.948 0.732 1.120 1.035 2008-Apr-30 18:53:05 LOG4 check_wapp_levels: WAPP-2 power levels: 1.001 0.918 0.942 1.033 2008-Apr-30 18:53:05 LOG4 check_wapp_levels: WAPP-3 power levels: 1.106 0.904 1.029 0.908 2008-Apr-30 18:53:05 LOG4 check_wapp_levels: WAPP-4 power levels: 1.039 1.010 0.905 0.899 2008-Apr-30 18:53:07 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.898 and 1.120 2008-Apr-30 18:53:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.786 < 0.8)! 2008-Apr-30 18:53:09 LOG4 check_wapp_levels: WAPP-1 power levels: 0.947 0.786 1.120 1.038 2008-Apr-30 18:53:09 LOG4 check_wapp_levels: WAPP-2 power levels: 1.000 0.920 0.942 1.033 2008-Apr-30 18:53:09 LOG4 check_wapp_levels: WAPP-3 power levels: 1.107 0.905 1.029 0.908 2008-Apr-30 18:53:09 LOG4 check_wapp_levels: WAPP-4 power levels: 1.040 1.010 0.905 0.898 2008-Apr-30 18:53:11 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.803 and 1.120 2008-Apr-30 18:53:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.720 < 0.8)! 2008-Apr-30 18:53:13 LOG4 check_wapp_levels: WAPP-1 power levels: 0.946 0.720 1.120 1.037 2008-Apr-30 18:53:13 LOG4 check_wapp_levels: WAPP-2 power levels: 0.999 0.919 0.942 1.033 2008-Apr-30 18:53:13 LOG4 check_wapp_levels: WAPP-3 power levels: 1.107 0.902 1.025 0.903 2008-Apr-30 18:53:13 LOG4 check_wapp_levels: WAPP-4 power levels: 1.038 1.009 0.904 0.896 2008-Apr-30 18:53:15 INFO5 check_wapp_levels: WAPP power levels are between 0.725 and 1.120 (still bad) 2008-Apr-30 18:53:17 INFO5 check_wapp_levels: WAPP power levels are between 0.701 and 1.121 (still bad) 2008-Apr-30 18:53:19 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.833 and 1.120 2008-Apr-30 18:53:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.774 < 0.8)! 2008-Apr-30 18:53:25 LOG4 check_wapp_levels: WAPP-1 power levels: 0.949 0.774 1.120 1.038 2008-Apr-30 18:53:25 LOG4 check_wapp_levels: WAPP-2 power levels: 1.002 0.918 0.942 1.034 2008-Apr-30 18:53:25 LOG4 check_wapp_levels: WAPP-3 power levels: 1.104 0.905 1.021 0.898 2008-Apr-30 18:53:25 LOG4 check_wapp_levels: WAPP-4 power levels: 1.037 1.009 0.906 0.898 2008-Apr-30 18:53:27 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.898 and 1.120 2008-Apr-30 18:53:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.743 < 0.8)! 2008-Apr-30 18:53:33 LOG4 check_wapp_levels: WAPP-1 power levels: 0.948 0.743 1.118 1.039 2008-Apr-30 18:53:33 LOG4 check_wapp_levels: WAPP-2 power levels: 0.999 0.919 0.941 1.033 2008-Apr-30 18:53:33 LOG4 check_wapp_levels: WAPP-3 power levels: 1.106 0.903 1.019 0.898 2008-Apr-30 18:53:33 LOG4 check_wapp_levels: WAPP-4 power levels: 1.038 1.009 0.905 0.898 2008-Apr-30 18:53:35 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.876 and 1.119 2008-Apr-30 18:53:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.552 < 0.8)! 2008-Apr-30 18:53:37 LOG4 check_wapp_levels: WAPP-1 power levels: 0.947 0.552 1.119 1.039 2008-Apr-30 18:53:37 LOG4 check_wapp_levels: WAPP-2 power levels: 0.999 0.918 0.941 1.034 2008-Apr-30 18:53:37 LOG4 check_wapp_levels: WAPP-3 power levels: 1.104 0.902 1.020 0.898 2008-Apr-30 18:53:37 LOG4 check_wapp_levels: WAPP-4 power levels: 1.038 1.009 0.905 0.897 2008-Apr-30 18:53:39 INFO5 check_wapp_levels: WAPP power levels are between 0.719 and 1.119 (still bad) 2008-Apr-30 18:53:41 INFO5 check_wapp_levels: WAPP power levels are between 0.793 and 1.118 (still bad) 2008-Apr-30 18:53:43 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.881 and 1.120 2008-Apr-30 18:53:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.729 < 0.8)! 2008-Apr-30 18:53:45 LOG4 check_wapp_levels: WAPP-1 power levels: 0.948 0.729 1.119 1.038 2008-Apr-30 18:53:45 LOG4 check_wapp_levels: WAPP-2 power levels: 0.999 0.917 0.942 1.034 2008-Apr-30 18:53:45 LOG4 check_wapp_levels: WAPP-3 power levels: 1.105 0.903 1.021 0.899 2008-Apr-30 18:53:45 LOG4 check_wapp_levels: WAPP-4 power levels: 1.038 1.009 0.906 0.897 2008-Apr-30 18:53:47 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.839 and 1.119 2008-Apr-30 18:53:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.795 < 0.8)! 2008-Apr-30 18:53:55 LOG4 check_wapp_levels: WAPP-1 power levels: 0.944 0.795 1.120 1.038 2008-Apr-30 18:53:55 LOG4 check_wapp_levels: WAPP-2 power levels: 0.999 0.919 0.942 1.035 2008-Apr-30 18:53:55 LOG4 check_wapp_levels: WAPP-3 power levels: 1.105 0.904 1.017 0.898 2008-Apr-30 18:53:55 LOG4 check_wapp_levels: WAPP-4 power levels: 1.039 1.008 0.905 0.897 2008-Apr-30 18:53:57 INFO5 check_wapp_levels: WAPP power levels are between 0.623 and 1.120 (still bad) 2008-Apr-30 18:53:59 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.874 and 1.119 2008-Apr-30 18:54:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.698 < 0.8)! 2008-Apr-30 18:54:02 LOG4 check_wapp_levels: WAPP-1 power levels: 0.943 0.698 1.120 1.041 2008-Apr-30 18:54:02 LOG4 check_wapp_levels: WAPP-2 power levels: 1.000 0.921 0.942 1.035 2008-Apr-30 18:54:02 LOG4 check_wapp_levels: WAPP-3 power levels: 1.105 0.903 1.019 0.899 2008-Apr-30 18:54:02 LOG4 check_wapp_levels: WAPP-4 power levels: 1.038 1.010 0.906 0.896 2008-Apr-30 18:54:04 INFO5 check_wapp_levels: WAPP power levels are between 0.734 and 1.119 (still bad) 2008-Apr-30 18:54:06 INFO5 check_wapp_levels: WAPP power levels are between 0.740 and 1.120 (still bad) 2008-Apr-30 18:54:08 INFO5 check_wapp_levels: WAPP power levels are between 0.563 and 1.119 (still bad) 2008-Apr-30 18:54:10 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.897 and 1.118 2008-Apr-30 18:54:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.569 < 0.8)! 2008-Apr-30 18:54:20 LOG4 check_wapp_levels: WAPP-1 power levels: 0.944 0.569 1.120 1.038 2008-Apr-30 18:54:20 LOG4 check_wapp_levels: WAPP-2 power levels: 0.999 0.917 0.941 1.033 2008-Apr-30 18:54:20 LOG4 check_wapp_levels: WAPP-3 power levels: 1.108 0.904 1.017 0.899 2008-Apr-30 18:54:20 LOG4 check_wapp_levels: WAPP-4 power levels: 1.040 1.008 0.906 0.897 2008-Apr-30 18:54:22 INFO5 check_wapp_levels: WAPP power levels are between 0.772 and 1.120 (still bad) 2008-Apr-30 18:54:24 INFO5 check_wapp_levels: WAPP power levels are between 0.744 and 1.120 (still bad) 2008-Apr-30 18:54:26 INFO5 check_wapp_levels: WAPP power levels are between 0.749 and 1.121 (still bad) 2008-Apr-30 18:54:28 INFO5 check_wapp_levels: WAPP power levels are between 0.796 and 1.121 (still bad) 2008-Apr-30 18:54:30 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.893 and 1.121 2008-Apr-30 18:54:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.786 < 0.8)! 2008-Apr-30 18:54:32 LOG4 check_wapp_levels: WAPP-1 power levels: 0.944 0.786 1.120 1.040 2008-Apr-30 18:54:32 LOG4 check_wapp_levels: WAPP-2 power levels: 0.999 0.919 0.941 1.033 2008-Apr-30 18:54:32 LOG4 check_wapp_levels: WAPP-3 power levels: 1.106 0.903 1.020 0.898 2008-Apr-30 18:54:32 LOG4 check_wapp_levels: WAPP-4 power levels: 1.041 1.009 0.905 0.898 2008-Apr-30 18:54:34 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.818 and 1.121 2008-Apr-30 18:54:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.711 < 0.8)! 2008-Apr-30 18:54:36 LOG4 check_wapp_levels: WAPP-1 power levels: 0.945 0.711 1.121 1.039 2008-Apr-30 18:54:36 LOG4 check_wapp_levels: WAPP-2 power levels: 1.000 0.919 0.942 1.033 2008-Apr-30 18:54:36 LOG4 check_wapp_levels: WAPP-3 power levels: 1.107 0.905 1.020 0.898 2008-Apr-30 18:54:36 LOG4 check_wapp_levels: WAPP-4 power levels: 1.039 1.009 0.906 0.897 2008-Apr-30 18:54:38 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.898 and 1.121 2008-Apr-30 18:54:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.743 < 0.8)! 2008-Apr-30 18:54:42 LOG4 check_wapp_levels: WAPP-1 power levels: 0.944 0.743 1.122 1.041 2008-Apr-30 18:54:42 LOG4 check_wapp_levels: WAPP-2 power levels: 1.000 0.921 0.941 1.033 2008-Apr-30 18:54:42 LOG4 check_wapp_levels: WAPP-3 power levels: 1.107 0.905 1.019 0.899 2008-Apr-30 18:54:42 LOG4 check_wapp_levels: WAPP-4 power levels: 1.041 1.009 0.906 0.899 2008-Apr-30 18:54:44 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.866 and 1.122 2008-Apr-30 18:54:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.788 < 0.8)! 2008-Apr-30 18:54:52 LOG4 check_wapp_levels: WAPP-1 power levels: 0.944 0.788 1.122 1.043 2008-Apr-30 18:54:52 LOG4 check_wapp_levels: WAPP-2 power levels: 1.001 0.921 0.942 1.034 2008-Apr-30 18:54:52 LOG4 check_wapp_levels: WAPP-3 power levels: 1.106 0.905 1.022 0.898 2008-Apr-30 18:54:52 LOG4 check_wapp_levels: WAPP-4 power levels: 1.043 1.009 0.907 0.899 2008-Apr-30 18:54:54 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.817 and 1.123 2008-Apr-30 18:54:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.777 < 0.8)! 2008-Apr-30 18:54:56 LOG4 check_wapp_levels: WAPP-1 power levels: 0.949 0.777 1.121 1.042 2008-Apr-30 18:54:56 LOG4 check_wapp_levels: WAPP-2 power levels: 1.004 0.920 0.942 1.033 2008-Apr-30 18:54:56 LOG4 check_wapp_levels: WAPP-3 power levels: 1.106 0.905 1.019 0.898 2008-Apr-30 18:54:56 LOG4 check_wapp_levels: WAPP-4 power levels: 1.042 1.010 0.907 0.900 2008-Apr-30 18:54:58 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.868 and 1.121 2008-Apr-30 18:55:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.635 < 0.8)! 2008-Apr-30 18:55:00 LOG4 check_wapp_levels: WAPP-1 power levels: 0.947 0.635 1.122 1.041 2008-Apr-30 18:55:00 LOG4 check_wapp_levels: WAPP-2 power levels: 1.003 0.921 0.942 1.033 2008-Apr-30 18:55:00 LOG4 check_wapp_levels: WAPP-3 power levels: 1.107 0.904 1.021 0.899 2008-Apr-30 18:55:00 LOG4 check_wapp_levels: WAPP-4 power levels: 1.042 1.009 0.908 0.899 2008-Apr-30 18:55:02 INFO5 check_wapp_levels: WAPP power levels are between 0.640 and 1.123 (still bad) 2008-Apr-30 18:55:04 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.879 and 1.124 2008-Apr-30 18:55:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.770 < 0.8)! 2008-Apr-30 18:55:06 LOG4 check_wapp_levels: WAPP-1 power levels: 0.948 0.770 1.123 1.041 2008-Apr-30 18:55:06 LOG4 check_wapp_levels: WAPP-2 power levels: 1.002 0.921 0.945 1.034 2008-Apr-30 18:55:06 LOG4 check_wapp_levels: WAPP-3 power levels: 1.108 0.904 1.021 0.899 2008-Apr-30 18:55:06 LOG4 check_wapp_levels: WAPP-4 power levels: 1.041 1.010 0.906 0.899 2008-Apr-30 18:55:08 INFO5 check_wapp_levels: WAPP power levels are between 0.771 and 1.122 (still bad) 2008-Apr-30 18:55:10 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.856 and 1.122 2008-Apr-30 18:55:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.742 < 0.8)! 2008-Apr-30 18:55:20 LOG4 check_wapp_levels: WAPP-1 power levels: 0.944 0.742 1.121 1.040 2008-Apr-30 18:55:20 LOG4 check_wapp_levels: WAPP-2 power levels: 1.003 0.922 0.946 1.037 2008-Apr-30 18:55:20 LOG4 check_wapp_levels: WAPP-3 power levels: 1.108 0.907 1.018 0.897 2008-Apr-30 18:55:20 LOG4 check_wapp_levels: WAPP-4 power levels: 1.042 1.010 0.907 0.899 2008-Apr-30 18:55:22 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.862 and 1.121 2008-Apr-30 18:55:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.782 < 0.8)! 2008-Apr-30 18:55:27 LOG4 check_wapp_levels: WAPP-1 power levels: 0.944 0.782 1.122 1.039 2008-Apr-30 18:55:27 LOG4 check_wapp_levels: WAPP-2 power levels: 1.004 0.920 0.944 1.035 2008-Apr-30 18:55:27 LOG4 check_wapp_levels: WAPP-3 power levels: 1.108 0.906 1.018 0.898 2008-Apr-30 18:55:27 LOG4 check_wapp_levels: WAPP-4 power levels: 1.041 1.010 0.907 0.899 2008-Apr-30 18:55:29 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.852 and 1.120 2008-Apr-30 18:55:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.652 < 0.8)! 2008-Apr-30 18:55:35 LOG4 check_wapp_levels: WAPP-1 power levels: 0.947 0.652 1.121 1.040 2008-Apr-30 18:55:35 LOG4 check_wapp_levels: WAPP-2 power levels: 1.004 0.920 0.943 1.035 2008-Apr-30 18:55:35 LOG4 check_wapp_levels: WAPP-3 power levels: 1.110 0.908 1.021 0.898 2008-Apr-30 18:55:35 LOG4 check_wapp_levels: WAPP-4 power levels: 1.041 1.010 0.907 0.899 2008-Apr-30 18:55:37 INFO5 check_wapp_levels: WAPP power levels are between 0.575 and 1.121 (still bad) 2008-Apr-30 18:55:39 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.899 and 1.121 2008-Apr-30 18:55:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.771 < 0.8)! 2008-Apr-30 18:55:41 LOG4 check_wapp_levels: WAPP-1 power levels: 0.949 0.771 1.121 1.038 2008-Apr-30 18:55:41 LOG4 check_wapp_levels: WAPP-2 power levels: 1.002 0.921 0.943 1.036 2008-Apr-30 18:55:41 LOG4 check_wapp_levels: WAPP-3 power levels: 1.111 0.908 1.020 0.900 2008-Apr-30 18:55:41 LOG4 check_wapp_levels: WAPP-4 power levels: 1.042 1.010 0.907 0.899 2008-Apr-30 18:55:43 INFO5 check_wapp_levels: WAPP power levels are between 0.753 and 1.119 (still bad) 2008-Apr-30 18:55:45 INFO5 check_wapp_levels: WAPP power levels are between 0.539 and 1.120 (still bad) 2008-Apr-30 18:55:47 INFO5 check_wapp_levels: WAPP power levels are between 0.789 and 1.120 (still bad) 2008-Apr-30 18:55:49 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.896 and 1.121 2008-Apr-30 18:56:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.653 < 0.8)! 2008-Apr-30 18:56:03 LOG4 check_wapp_levels: WAPP-1 power levels: 0.946 0.653 1.121 1.040 2008-Apr-30 18:56:03 LOG4 check_wapp_levels: WAPP-2 power levels: 1.003 0.920 0.944 1.034 2008-Apr-30 18:56:03 LOG4 check_wapp_levels: WAPP-3 power levels: 1.112 0.910 1.022 0.902 2008-Apr-30 18:56:03 LOG4 check_wapp_levels: WAPP-4 power levels: 1.044 1.011 0.908 0.899 2008-Apr-30 18:56:05 INFO5 check_wapp_levels: WAPP power levels are between 0.649 and 1.121 (still bad) 2008-Apr-30 18:56:07 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.853 and 1.121 2008-Apr-30 18:56:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.669 < 0.8)! 2008-Apr-30 18:56:15 LOG4 check_wapp_levels: WAPP-1 power levels: 0.944 0.669 1.120 1.038 2008-Apr-30 18:56:15 LOG4 check_wapp_levels: WAPP-2 power levels: 1.004 0.921 0.946 1.036 2008-Apr-30 18:56:15 LOG4 check_wapp_levels: WAPP-3 power levels: 1.112 0.910 1.021 0.901 2008-Apr-30 18:56:15 LOG4 check_wapp_levels: WAPP-4 power levels: 1.042 1.009 0.907 0.897 2008-Apr-30 18:56:17 INFO5 check_wapp_levels: WAPP power levels are between 0.759 and 1.120 (still bad) 2008-Apr-30 18:56:19 INFO5 check_wapp_levels: WAPP power levels are between 0.625 and 1.121 (still bad) 2008-Apr-30 18:56:21 INFO5 check_wapp_levels: WAPP power levels are between 0.766 and 1.118 (still bad) 2008-Apr-30 18:56:23 INFO5 check_wapp_levels: WAPP power levels are between 0.750 and 1.121 (still bad) 2008-Apr-30 18:56:25 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.846 and 1.121 2008-Apr-30 18:56:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.719 < 0.8)! 2008-Apr-30 18:56:29 LOG4 check_wapp_levels: WAPP-1 power levels: 0.945 0.719 1.120 1.039 2008-Apr-30 18:56:29 LOG4 check_wapp_levels: WAPP-2 power levels: 1.005 0.924 0.944 1.034 2008-Apr-30 18:56:29 LOG4 check_wapp_levels: WAPP-3 power levels: 1.115 0.910 1.021 0.900 2008-Apr-30 18:56:29 LOG4 check_wapp_levels: WAPP-4 power levels: 1.043 1.010 0.908 0.898 2008-Apr-30 18:56:31 INFO5 check_wapp_levels: WAPP power levels are between 0.612 and 1.120 (still bad) 2008-Apr-30 18:56:33 INFO5 check_wapp_levels: WAPP power levels are between 0.771 and 1.120 (still bad) 2008-Apr-30 18:56:35 INFO5 check_wapp_levels: WAPP power levels are between 0.714 and 1.120 (still bad) 2008-Apr-30 18:56:37 INFO5 check_wapp_levels: WAPP power levels are between 0.790 and 1.121 (still bad) 2008-Apr-30 18:56:39 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.842 and 1.122 2008-Apr-30 18:56:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.770 < 0.8)! 2008-Apr-30 18:56:41 LOG4 check_wapp_levels: WAPP-1 power levels: 0.943 0.770 1.122 1.038 2008-Apr-30 18:56:41 LOG4 check_wapp_levels: WAPP-2 power levels: 1.004 0.922 0.946 1.036 2008-Apr-30 18:56:41 LOG4 check_wapp_levels: WAPP-3 power levels: 1.116 0.911 1.021 0.901 2008-Apr-30 18:56:41 LOG4 check_wapp_levels: WAPP-4 power levels: 1.043 1.010 0.909 0.898 2008-Apr-30 18:56:43 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.832 and 1.122 2008-Apr-30 18:56:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.754 < 0.8)! 2008-Apr-30 18:56:45 LOG4 check_wapp_levels: WAPP-1 power levels: 0.945 0.754 1.121 1.038 2008-Apr-30 18:56:45 LOG4 check_wapp_levels: WAPP-2 power levels: 1.003 0.922 0.945 1.036 2008-Apr-30 18:56:45 LOG4 check_wapp_levels: WAPP-3 power levels: 1.115 0.911 1.022 0.901 2008-Apr-30 18:56:45 LOG4 check_wapp_levels: WAPP-4 power levels: 1.044 1.010 0.909 0.898 2008-Apr-30 18:56:47 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.874 and 1.123 2008-Apr-30 18:56:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.581 < 0.8)! 2008-Apr-30 18:56:49 LOG4 check_wapp_levels: WAPP-1 power levels: 0.942 0.581 1.121 1.037 2008-Apr-30 18:56:49 LOG4 check_wapp_levels: WAPP-2 power levels: 1.003 0.921 0.945 1.035 2008-Apr-30 18:56:49 LOG4 check_wapp_levels: WAPP-3 power levels: 1.114 0.910 1.021 0.902 2008-Apr-30 18:56:49 LOG4 check_wapp_levels: WAPP-4 power levels: 1.044 1.011 0.909 0.898 2008-Apr-30 18:56:51 INFO5 check_wapp_levels: WAPP power levels are between 0.633 and 1.122 (still bad) 2008-Apr-30 18:56:53 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.881 and 1.124 2008-Apr-30 18:56:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.754 < 0.8)! 2008-Apr-30 18:56:58 LOG4 check_wapp_levels: WAPP-1 power levels: 0.945 0.754 1.129 1.045 2008-Apr-30 18:56:58 LOG4 check_wapp_levels: WAPP-2 power levels: 1.006 0.923 0.944 1.033 2008-Apr-30 18:56:58 LOG4 check_wapp_levels: WAPP-3 power levels: 1.113 0.911 1.021 0.901 2008-Apr-30 18:56:58 LOG4 check_wapp_levels: WAPP-4 power levels: 1.043 1.010 0.908 0.897 2008-Apr-30 18:57:00 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.885 and 1.131 2008-Apr-30 18:57:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.676 < 0.8)! 2008-Apr-30 18:57:06 LOG4 check_wapp_levels: WAPP-1 power levels: 0.944 0.676 1.139 1.056 2008-Apr-30 18:57:06 LOG4 check_wapp_levels: WAPP-2 power levels: 1.005 0.923 0.945 1.034 2008-Apr-30 18:57:06 LOG4 check_wapp_levels: WAPP-3 power levels: 1.112 0.909 1.022 0.901 2008-Apr-30 18:57:06 LOG4 check_wapp_levels: WAPP-4 power levels: 1.043 1.010 0.909 0.899 2008-Apr-30 18:57:08 INFO5 check_wapp_levels: WAPP power levels are between 0.783 and 1.139 (still bad) 2008-Apr-30 18:57:10 INFO5 check_wapp_levels: WAPP power levels are between 0.797 and 1.138 (still bad) 2008-Apr-30 18:57:12 INFO5 check_wapp_levels: WAPP power levels are between 0.601 and 1.135 (still bad) 2008-Apr-30 18:57:14 INFO5 check_wapp_levels: WAPP power levels are between 0.772 and 1.133 (still bad) 2008-Apr-30 18:57:16 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.852 and 1.129 2008-Apr-30 18:57:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.692 < 0.8)! 2008-Apr-30 18:57:22 LOG4 check_wapp_levels: WAPP-1 power levels: 0.948 0.692 1.122 1.044 2008-Apr-30 18:57:22 LOG4 check_wapp_levels: WAPP-2 power levels: 1.003 0.921 0.944 1.034 2008-Apr-30 18:57:22 LOG4 check_wapp_levels: WAPP-3 power levels: 1.112 0.909 1.023 0.903 2008-Apr-30 18:57:22 LOG4 check_wapp_levels: WAPP-4 power levels: 1.047 1.012 0.912 0.901 2008-Apr-30 18:57:24 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.820 and 1.122 2008-Apr-30 18:57:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.587 < 0.8)! 2008-Apr-30 18:57:28 LOG4 check_wapp_levels: WAPP-1 power levels: 0.947 0.587 1.123 1.042 2008-Apr-30 18:57:28 LOG4 check_wapp_levels: WAPP-2 power levels: 1.003 0.921 0.945 1.034 2008-Apr-30 18:57:28 LOG4 check_wapp_levels: WAPP-3 power levels: 1.112 0.908 1.024 0.903 2008-Apr-30 18:57:28 LOG4 check_wapp_levels: WAPP-4 power levels: 1.052 1.016 0.916 0.906 2008-Apr-30 18:57:30 INFO5 check_wapp_levels: WAPP power levels are between 0.795 and 1.122 (still bad) 2008-Apr-30 18:57:32 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.840 and 1.121 2008-Apr-30 18:58:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.754 < 0.8)! 2008-Apr-30 18:58:00 LOG4 check_wapp_levels: WAPP-1 power levels: 0.955 0.754 1.122 1.043 2008-Apr-30 18:58:00 LOG4 check_wapp_levels: WAPP-2 power levels: 1.004 0.920 0.946 1.035 2008-Apr-30 18:58:00 LOG4 check_wapp_levels: WAPP-3 power levels: 1.110 0.907 1.025 0.899 2008-Apr-30 18:58:00 LOG4 check_wapp_levels: WAPP-4 power levels: 1.043 1.011 0.909 0.899 2008-Apr-30 18:58:02 INFO5 check_wapp_levels: WAPP power levels are between 0.752 and 1.121 (still bad) 2008-Apr-30 18:58:04 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.900 and 1.121 2008-Apr-30 18:58:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.783 < 0.8)! 2008-Apr-30 18:58:12 LOG4 check_wapp_levels: WAPP-1 power levels: 0.949 0.783 1.121 1.042 2008-Apr-30 18:58:12 LOG4 check_wapp_levels: WAPP-2 power levels: 1.001 0.921 0.945 1.033 2008-Apr-30 18:58:12 LOG4 check_wapp_levels: WAPP-3 power levels: 1.109 0.907 1.023 0.900 2008-Apr-30 18:58:12 LOG4 check_wapp_levels: WAPP-4 power levels: 1.043 1.013 0.909 0.901 2008-Apr-30 18:58:14 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.866 and 1.122 2008-Apr-30 18:58:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.764 < 0.8)! 2008-Apr-30 18:58:16 LOG4 check_wapp_levels: WAPP-1 power levels: 0.944 0.764 1.122 1.041 2008-Apr-30 18:58:16 LOG4 check_wapp_levels: WAPP-2 power levels: 1.006 0.920 0.944 1.034 2008-Apr-30 18:58:16 LOG4 check_wapp_levels: WAPP-3 power levels: 1.108 0.907 1.024 0.901 2008-Apr-30 18:58:16 LOG4 check_wapp_levels: WAPP-4 power levels: 1.042 1.012 0.908 0.900 2008-Apr-30 18:58:18 INFO5 check_wapp_levels: WAPP power levels are between 0.697 and 1.121 (still bad) 2008-Apr-30 18:58:21 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.862 and 1.123 2008-Apr-30 18:58:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.698 < 0.8)! 2008-Apr-30 18:58:25 LOG4 check_wapp_levels: WAPP-1 power levels: 0.944 0.698 1.122 1.041 2008-Apr-30 18:58:25 LOG4 check_wapp_levels: WAPP-2 power levels: 1.005 0.921 0.949 1.037 2008-Apr-30 18:58:25 LOG4 check_wapp_levels: WAPP-3 power levels: 1.109 0.908 1.025 0.901 2008-Apr-30 18:58:25 LOG4 check_wapp_levels: WAPP-4 power levels: 1.042 1.011 0.906 0.899 2008-Apr-30 18:58:27 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.898 and 1.123 2008-Apr-30 18:58:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.792 < 0.8)! 2008-Apr-30 18:58:37 LOG4 check_wapp_levels: WAPP-1 power levels: 0.948 0.792 1.122 1.043 2008-Apr-30 18:58:37 LOG4 check_wapp_levels: WAPP-2 power levels: 1.004 0.921 0.947 1.036 2008-Apr-30 18:58:37 LOG4 check_wapp_levels: WAPP-3 power levels: 1.106 0.905 1.025 0.901 2008-Apr-30 18:58:37 LOG4 check_wapp_levels: WAPP-4 power levels: 1.042 1.009 0.907 0.898 2008-Apr-30 18:58:39 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.811 and 1.121 2008-Apr-30 18:58:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.750 < 0.8)! 2008-Apr-30 18:58:41 LOG4 check_wapp_levels: WAPP-1 power levels: 0.948 0.750 1.122 1.043 2008-Apr-30 18:58:41 LOG4 check_wapp_levels: WAPP-2 power levels: 1.001 0.922 0.946 1.035 2008-Apr-30 18:58:41 LOG4 check_wapp_levels: WAPP-3 power levels: 1.106 0.905 1.024 0.901 2008-Apr-30 18:58:41 LOG4 check_wapp_levels: WAPP-4 power levels: 1.042 1.010 0.908 0.898 2008-Apr-30 18:58:43 INFO5 check_wapp_levels: WAPP power levels are between 0.748 and 1.122 (still bad) 2008-Apr-30 18:58:45 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.807 and 1.122 2008-Apr-30 18:58:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.793 < 0.8)! 2008-Apr-30 18:58:47 LOG4 check_wapp_levels: WAPP-1 power levels: 0.947 0.793 1.122 1.042 2008-Apr-30 18:58:47 LOG4 check_wapp_levels: WAPP-2 power levels: 1.001 0.921 0.948 1.037 2008-Apr-30 18:58:47 LOG4 check_wapp_levels: WAPP-3 power levels: 1.108 0.908 1.027 0.901 2008-Apr-30 18:58:47 LOG4 check_wapp_levels: WAPP-4 power levels: 1.042 1.009 0.908 0.897 2008-Apr-30 18:58:49 INFO5 check_wapp_levels: WAPP power levels are between 0.782 and 1.122 (still bad) 2008-Apr-30 18:58:51 INFO5 check_wapp_levels: WAPP power levels are between 0.776 and 1.121 (still bad) 2008-Apr-30 18:58:53 INFO5 check_wapp_levels: WAPP power levels are between 0.767 and 1.121 (still bad) 2008-Apr-30 18:58:55 INFO5 check_wapp_levels: WAPP power levels are between 0.764 and 1.122 (still bad) 2008-Apr-30 18:58:57 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.861 and 1.124 2008-Apr-30 18:59:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.623 < 0.8)! 2008-Apr-30 18:59:27 LOG4 check_wapp_levels: WAPP-1 power levels: 0.947 0.623 1.121 1.041 2008-Apr-30 18:59:27 LOG4 check_wapp_levels: WAPP-2 power levels: 1.004 0.919 0.947 1.034 2008-Apr-30 18:59:27 LOG4 check_wapp_levels: WAPP-3 power levels: 1.104 0.905 1.021 0.900 2008-Apr-30 18:59:27 LOG4 check_wapp_levels: WAPP-4 power levels: 1.045 1.016 0.911 0.902 2008-Apr-30 18:59:29 INFO5 check_wapp_levels: WAPP power levels are between 0.623 and 1.122 (still bad) 2008-Apr-30 18:59:31 INFO5 check_wapp_levels: WAPP power levels are between 0.755 and 1.121 (still bad) 2008-Apr-30 18:59:33 INFO5 check_wapp_levels: WAPP power levels are between 0.756 and 1.121 (still bad) 2008-Apr-30 18:59:35 INFO5 check_wapp_levels: WAPP power levels are between 0.791 and 1.121 (still bad) 2008-Apr-30 18:59:37 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.852 and 1.121 2008-Apr-30 18:59:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.718 < 0.8)! 2008-Apr-30 18:59:39 LOG4 check_wapp_levels: WAPP-1 power levels: 0.943 0.718 1.122 1.040 2008-Apr-30 18:59:39 LOG4 check_wapp_levels: WAPP-2 power levels: 1.001 0.919 0.948 1.037 2008-Apr-30 18:59:39 LOG4 check_wapp_levels: WAPP-3 power levels: 1.105 0.905 1.026 0.901 2008-Apr-30 18:59:39 LOG4 check_wapp_levels: WAPP-4 power levels: 1.043 1.013 0.909 0.901 2008-Apr-30 18:59:41 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.899 and 1.123 2008-Apr-30 18:59:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.793 < 0.8)! 2008-Apr-30 18:59:48 LOG4 check_wapp_levels: WAPP-1 power levels: 0.943 0.793 1.124 1.044 2008-Apr-30 18:59:48 LOG4 check_wapp_levels: WAPP-2 power levels: 1.002 0.917 0.948 1.036 2008-Apr-30 18:59:48 LOG4 check_wapp_levels: WAPP-3 power levels: 1.106 0.907 1.023 0.900 2008-Apr-30 18:59:48 LOG4 check_wapp_levels: WAPP-4 power levels: 1.040 1.010 0.907 0.898 2008-Apr-30 18:59:50 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.853 and 1.124 2008-Apr-30 19:00:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.763 < 0.8)! 2008-Apr-30 19:00:02 LOG4 check_wapp_levels: WAPP-1 power levels: 0.941 0.763 1.124 1.047 2008-Apr-30 19:00:02 LOG4 check_wapp_levels: WAPP-2 power levels: 1.004 0.919 0.946 1.035 2008-Apr-30 19:00:02 LOG4 check_wapp_levels: WAPP-3 power levels: 1.106 0.906 1.022 0.900 2008-Apr-30 19:00:02 LOG4 check_wapp_levels: WAPP-4 power levels: 1.043 1.012 0.909 0.899 2008-Apr-30 19:00:04 INFO5 check_wapp_levels: WAPP power levels are between 0.767 and 1.122 (still bad) 2008-Apr-30 19:00:06 INFO5 check_wapp_levels: WAPP power levels are between 0.776 and 1.122 (still bad) 2008-Apr-30 19:00:08 INFO5 check_wapp_levels: WAPP power levels are between 0.783 and 1.122 (still bad) 2008-Apr-30 19:00:10 INFO5 check_wapp_levels: WAPP power levels are between 0.787 and 1.122 (still bad) 2008-Apr-30 19:00:12 INFO5 check_wapp_levels: WAPP power levels are between 0.788 and 1.123 (still bad) 2008-Apr-30 19:00:14 INFO5 check_wapp_levels: WAPP power levels are between 0.797 and 1.124 (still bad) 2008-Apr-30 19:00:16 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.822 and 1.123 2008-Apr-30 19:00:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.772 < 0.8)! 2008-Apr-30 19:00:22 LOG4 check_wapp_levels: WAPP-1 power levels: 0.950 0.772 1.123 1.043 2008-Apr-30 19:00:22 LOG4 check_wapp_levels: WAPP-2 power levels: 1.003 0.919 0.945 1.033 2008-Apr-30 19:00:22 LOG4 check_wapp_levels: WAPP-3 power levels: 1.120 0.917 1.021 0.899 2008-Apr-30 19:00:22 LOG4 check_wapp_levels: WAPP-4 power levels: 1.042 1.011 0.907 0.899 2008-Apr-30 19:00:24 INFO5 check_wapp_levels: WAPP power levels are between 0.773 and 1.124 (still bad) 2008-Apr-30 19:00:26 INFO5 check_wapp_levels: WAPP power levels are between 0.738 and 1.124 (still bad) 2008-Apr-30 19:00:28 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.898 and 1.125 2008-Apr-30 19:00:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.700 < 0.8)! 2008-Apr-30 19:00:30 LOG4 check_wapp_levels: WAPP-1 power levels: 0.944 0.700 1.124 1.042 2008-Apr-30 19:00:30 LOG4 check_wapp_levels: WAPP-2 power levels: 1.004 0.921 0.945 1.032 2008-Apr-30 19:00:30 LOG4 check_wapp_levels: WAPP-3 power levels: 1.109 0.909 1.022 0.901 2008-Apr-30 19:00:30 LOG4 check_wapp_levels: WAPP-4 power levels: 1.041 1.010 0.907 0.898 2008-Apr-30 19:00:32 INFO5 check_wapp_levels: WAPP power levels are between 0.605 and 1.123 (still bad) 2008-Apr-30 19:00:34 INFO5 check_wapp_levels: WAPP power levels are between 0.611 and 1.123 (still bad) 2008-Apr-30 19:00:36 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.811 and 1.124 2008-Apr-30 19:00:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.729 < 0.8)! 2008-Apr-30 19:00:38 LOG4 check_wapp_levels: WAPP-1 power levels: 0.942 0.729 1.123 1.043 2008-Apr-30 19:00:38 LOG4 check_wapp_levels: WAPP-2 power levels: 1.003 0.920 0.945 1.032 2008-Apr-30 19:00:38 LOG4 check_wapp_levels: WAPP-3 power levels: 1.107 0.906 1.025 0.902 2008-Apr-30 19:00:38 LOG4 check_wapp_levels: WAPP-4 power levels: 1.042 1.011 0.907 0.900 2008-Apr-30 19:00:40 INFO5 check_wapp_levels: WAPP power levels are between 0.644 and 1.124 (still bad) 2008-Apr-30 19:00:42 INFO5 check_wapp_levels: WAPP power levels are between 0.712 and 1.122 (still bad) 2008-Apr-30 19:00:44 INFO5 check_wapp_levels: WAPP power levels are between 0.604 and 1.123 (still bad) 2008-Apr-30 19:00:46 INFO5 check_wapp_levels: WAPP power levels are between 0.626 and 1.123 (still bad) 2008-Apr-30 19:00:48 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.884 and 1.125 2008-Apr-30 19:01:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.577 < 0.8)! 2008-Apr-30 19:01:09 LOG4 check_wapp_levels: WAPP-1 power levels: 0.940 0.577 1.124 1.046 2008-Apr-30 19:01:09 LOG4 check_wapp_levels: WAPP-2 power levels: 1.003 0.919 0.945 1.032 2008-Apr-30 19:01:09 LOG4 check_wapp_levels: WAPP-3 power levels: 1.106 0.908 1.023 0.901 2008-Apr-30 19:01:09 LOG4 check_wapp_levels: WAPP-4 power levels: 1.044 1.011 0.908 0.902 2008-Apr-30 19:01:11 INFO5 check_wapp_levels: WAPP power levels are between 0.596 and 1.124 (still bad) 2008-Apr-30 19:01:13 INFO5 check_wapp_levels: WAPP power levels are between 0.672 and 1.123 (still bad) 2008-Apr-30 19:01:15 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.869 and 1.124 2008-Apr-30 19:01:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.649 < 0.8)! 2008-Apr-30 19:01:21 LOG4 check_wapp_levels: WAPP-1 power levels: 0.943 0.649 1.123 1.046 2008-Apr-30 19:01:21 LOG4 check_wapp_levels: WAPP-2 power levels: 1.004 0.920 0.945 1.033 2008-Apr-30 19:01:21 LOG4 check_wapp_levels: WAPP-3 power levels: 1.107 0.909 1.022 0.900 2008-Apr-30 19:01:21 LOG4 check_wapp_levels: WAPP-4 power levels: 1.044 1.013 0.909 0.902 2008-Apr-30 19:01:23 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.810 and 1.122 2008-Apr-30 19:01:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.799 < 0.8)! 2008-Apr-30 19:01:29 LOG4 check_wapp_levels: WAPP-1 power levels: 0.940 0.799 1.124 1.043 2008-Apr-30 19:01:29 LOG4 check_wapp_levels: WAPP-2 power levels: 1.004 0.919 0.945 1.032 2008-Apr-30 19:01:29 LOG4 check_wapp_levels: WAPP-3 power levels: 1.106 0.909 1.026 0.899 2008-Apr-30 19:01:29 LOG4 check_wapp_levels: WAPP-4 power levels: 1.044 1.011 0.907 0.900 2008-Apr-30 19:01:31 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.844 and 1.124 2008-Apr-30 19:01:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.763 < 0.8)! 2008-Apr-30 19:01:33 LOG4 check_wapp_levels: WAPP-1 power levels: 0.942 0.763 1.123 1.045 2008-Apr-30 19:01:33 LOG4 check_wapp_levels: WAPP-2 power levels: 1.004 0.920 0.946 1.034 2008-Apr-30 19:01:33 LOG4 check_wapp_levels: WAPP-3 power levels: 1.109 0.909 1.024 0.900 2008-Apr-30 19:01:33 LOG4 check_wapp_levels: WAPP-4 power levels: 1.044 1.012 0.909 0.900 2008-Apr-30 19:01:35 INFO5 check_wapp_levels: WAPP power levels are between 0.680 and 1.123 (still bad) 2008-Apr-30 19:01:37 INFO5 check_wapp_levels: WAPP power levels are between 0.653 and 1.122 (still bad) 2008-Apr-30 19:01:39 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.900 and 1.124 2008-Apr-30 19:01:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.648 < 0.8)! 2008-Apr-30 19:01:49 LOG4 check_wapp_levels: WAPP-1 power levels: 0.945 0.648 1.122 1.042 2008-Apr-30 19:01:49 LOG4 check_wapp_levels: WAPP-2 power levels: 1.003 0.920 0.947 1.033 2008-Apr-30 19:01:49 LOG4 check_wapp_levels: WAPP-3 power levels: 1.108 0.911 1.024 0.901 2008-Apr-30 19:01:49 LOG4 check_wapp_levels: WAPP-4 power levels: 1.045 1.011 0.908 0.901 2008-Apr-30 19:01:51 INFO5 check_wapp_levels: WAPP power levels are between 0.716 and 1.123 (still bad) 2008-Apr-30 19:01:53 INFO5 check_wapp_levels: WAPP power levels are between 0.597 and 1.124 (still bad) 2008-Apr-30 19:01:55 INFO5 check_wapp_levels: WAPP power levels are between 0.721 and 1.123 (still bad) 2008-Apr-30 19:01:57 INFO5 check_wapp_levels: WAPP power levels are between 0.719 and 1.124 (still bad) 2008-Apr-30 19:01:59 INFO5 check_wapp_levels: WAPP power levels are between 0.658 and 1.124 (still bad) 2008-Apr-30 19:02:01 INFO5 check_wapp_levels: WAPP power levels are between 0.698 and 1.124 (still bad) 2008-Apr-30 19:02:03 INFO5 check_wapp_levels: WAPP power levels are between 0.721 and 1.123 (still bad) 2008-Apr-30 19:02:05 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.900 and 1.123 2008-Apr-30 19:02:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.697 < 0.8)! 2008-Apr-30 19:02:27 LOG4 check_wapp_levels: WAPP-1 power levels: 0.945 0.697 1.125 1.039 2008-Apr-30 19:02:27 LOG4 check_wapp_levels: WAPP-2 power levels: 1.006 0.920 0.950 1.038 2008-Apr-30 19:02:27 LOG4 check_wapp_levels: WAPP-3 power levels: 1.112 0.912 1.022 0.901 2008-Apr-30 19:02:27 LOG4 check_wapp_levels: WAPP-4 power levels: 1.044 1.009 0.909 0.899 2008-Apr-30 19:02:29 INFO5 check_wapp_levels: WAPP power levels are between 0.786 and 1.124 (still bad) 2008-Apr-30 19:02:31 INFO5 check_wapp_levels: WAPP power levels are between 0.722 and 1.124 (still bad) 2008-Apr-30 19:02:33 INFO5 check_wapp_levels: WAPP power levels are between 0.766 and 1.126 (still bad) 2008-Apr-30 19:02:36 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.843 and 1.124 2008-Apr-30 19:02:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.584 < 0.8)! 2008-Apr-30 19:02:38 LOG4 check_wapp_levels: WAPP-1 power levels: 0.944 0.584 1.124 1.044 2008-Apr-30 19:02:38 LOG4 check_wapp_levels: WAPP-2 power levels: 1.005 0.921 0.952 1.039 2008-Apr-30 19:02:38 LOG4 check_wapp_levels: WAPP-3 power levels: 1.113 0.913 1.023 0.901 2008-Apr-30 19:02:38 LOG4 check_wapp_levels: WAPP-4 power levels: 1.044 1.010 0.909 0.899 2008-Apr-30 19:02:40 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.899 and 1.126 2008-Apr-30 19:02:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.763 < 0.8)! 2008-Apr-30 19:02:42 LOG4 check_wapp_levels: WAPP-1 power levels: 0.943 0.763 1.125 1.044 2008-Apr-30 19:02:42 LOG4 check_wapp_levels: WAPP-2 power levels: 1.007 0.920 0.950 1.036 2008-Apr-30 19:02:42 LOG4 check_wapp_levels: WAPP-3 power levels: 1.112 0.913 1.024 0.902 2008-Apr-30 19:02:42 LOG4 check_wapp_levels: WAPP-4 power levels: 1.045 1.009 0.909 0.899 2008-Apr-30 19:02:44 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.898 and 1.224 2008-Apr-30 19:02:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.778 < 0.8)! 2008-Apr-30 19:02:50 LOG4 check_wapp_levels: WAPP-1 power levels: 0.949 0.778 1.125 1.045 2008-Apr-30 19:02:50 LOG4 check_wapp_levels: WAPP-2 power levels: 1.004 0.921 0.947 1.035 2008-Apr-30 19:02:50 LOG4 check_wapp_levels: WAPP-3 power levels: 1.112 0.912 1.025 0.901 2008-Apr-30 19:02:50 LOG4 check_wapp_levels: WAPP-4 power levels: 1.045 1.010 0.909 0.899 2008-Apr-30 19:02:52 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.896 and 1.125 2008-Apr-30 19:03:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.785 < 0.8)! 2008-Apr-30 19:03:00 LOG4 check_wapp_levels: WAPP-1 power levels: 0.948 0.785 1.124 1.043 2008-Apr-30 19:03:00 LOG4 check_wapp_levels: WAPP-2 power levels: 1.006 0.921 0.948 1.035 2008-Apr-30 19:03:00 LOG4 check_wapp_levels: WAPP-3 power levels: 1.114 0.915 1.024 0.901 2008-Apr-30 19:03:00 LOG4 check_wapp_levels: WAPP-4 power levels: 1.045 1.011 0.909 0.901 2008-Apr-30 19:03:02 INFO5 check_wapp_levels: WAPP power levels are between 0.544 and 1.125 (still bad) 2008-Apr-30 19:03:04 INFO5 check_wapp_levels: WAPP power levels are between 0.765 and 1.125 (still bad) 2008-Apr-30 19:03:06 INFO5 check_wapp_levels: WAPP power levels are between 0.671 and 1.125 (still bad) 2008-Apr-30 19:03:08 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.803 and 1.125 2008-Apr-30 19:03:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.776 < 0.8)! 2008-Apr-30 19:03:20 LOG4 check_wapp_levels: WAPP-1 power levels: 0.942 0.776 1.127 1.045 2008-Apr-30 19:03:20 LOG4 check_wapp_levels: WAPP-2 power levels: 1.006 0.923 0.948 1.035 2008-Apr-30 19:03:20 LOG4 check_wapp_levels: WAPP-3 power levels: 1.112 0.917 1.030 0.909 2008-Apr-30 19:03:20 LOG4 check_wapp_levels: WAPP-4 power levels: 1.045 1.011 0.910 0.900 2008-Apr-30 19:03:22 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.834 and 1.129 2008-Apr-30 19:03:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.728 < 0.8)! 2008-Apr-30 19:03:24 LOG4 check_wapp_levels: WAPP-1 power levels: 0.949 0.728 1.129 1.049 2008-Apr-30 19:03:24 LOG4 check_wapp_levels: WAPP-2 power levels: 1.010 0.920 0.948 1.036 2008-Apr-30 19:03:24 LOG4 check_wapp_levels: WAPP-3 power levels: 1.114 0.915 1.029 0.908 2008-Apr-30 19:03:24 LOG4 check_wapp_levels: WAPP-4 power levels: 1.045 1.010 0.909 0.899 2008-Apr-30 19:03:26 INFO5 check_wapp_levels: WAPP power levels are between 0.726 and 1.130 (still bad) 2008-Apr-30 19:03:28 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.885 and 1.130 2008-Apr-30 19:03:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.582 < 0.8)! 2008-Apr-30 19:03:32 LOG4 check_wapp_levels: WAPP-1 power levels: 0.945 0.582 1.130 1.049 2008-Apr-30 19:03:32 LOG4 check_wapp_levels: WAPP-2 power levels: 1.007 0.922 0.948 1.035 2008-Apr-30 19:03:32 LOG4 check_wapp_levels: WAPP-3 power levels: 1.112 0.916 1.026 0.904 2008-Apr-30 19:03:32 LOG4 check_wapp_levels: WAPP-4 power levels: 1.047 1.012 0.911 0.900 2008-Apr-30 19:03:34 INFO5 check_wapp_levels: WAPP power levels are between 0.791 and 1.131 (still bad) 2008-Apr-30 19:03:36 INFO5 check_wapp_levels: WAPP power levels are between 0.755 and 1.130 (still bad) 2008-Apr-30 19:03:38 INFO5 check_wapp_levels: WAPP power levels are between 0.735 and 1.131 (still bad) 2008-Apr-30 19:03:40 INFO5 check_wapp_levels: WAPP power levels are between 0.781 and 1.129 (still bad) 2008-Apr-30 19:03:42 INFO5 check_wapp_levels: WAPP power levels are between 0.748 and 1.129 (still bad) 2008-Apr-30 19:03:44 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.900 and 1.130 2008-Apr-30 19:03:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.750 < 0.8)! 2008-Apr-30 19:03:52 LOG4 check_wapp_levels: WAPP-1 power levels: 0.947 0.750 1.130 1.048 2008-Apr-30 19:03:52 LOG4 check_wapp_levels: WAPP-2 power levels: 1.013 0.927 0.949 1.036 2008-Apr-30 19:03:52 LOG4 check_wapp_levels: WAPP-3 power levels: 1.114 0.914 1.025 0.903 2008-Apr-30 19:03:52 LOG4 check_wapp_levels: WAPP-4 power levels: 1.046 1.012 0.910 0.900 2008-Apr-30 19:03:54 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.843 and 1.129 2008-Apr-30 19:03:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.636 < 0.8)! 2008-Apr-30 19:03:57 LOG4 check_wapp_levels: WAPP-1 power levels: 0.945 0.636 1.129 1.050 2008-Apr-30 19:03:57 LOG4 check_wapp_levels: WAPP-2 power levels: 1.011 0.927 0.947 1.035 2008-Apr-30 19:03:57 LOG4 check_wapp_levels: WAPP-3 power levels: 1.112 0.915 1.026 0.902 2008-Apr-30 19:03:57 LOG4 check_wapp_levels: WAPP-4 power levels: 1.046 1.011 0.910 0.900 2008-Apr-30 19:03:59 INFO5 check_wapp_levels: WAPP power levels are between 0.758 and 1.128 (still bad) 2008-Apr-30 19:04:01 INFO5 check_wapp_levels: WAPP power levels are between 0.655 and 1.128 (still bad) 2008-Apr-30 19:04:03 INFO5 check_wapp_levels: WAPP power levels are between 0.620 and 1.131 (still bad) 2008-Apr-30 19:04:05 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.896 and 1.130 2008-Apr-30 19:04:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.694 < 0.8)! 2008-Apr-30 19:04:09 LOG4 check_wapp_levels: WAPP-1 power levels: 0.953 0.694 1.128 1.051 2008-Apr-30 19:04:09 LOG4 check_wapp_levels: WAPP-2 power levels: 1.009 0.921 0.947 1.034 2008-Apr-30 19:04:09 LOG4 check_wapp_levels: WAPP-3 power levels: 1.114 0.917 1.023 0.902 2008-Apr-30 19:04:09 LOG4 check_wapp_levels: WAPP-4 power levels: 1.046 1.012 0.910 0.901 2008-Apr-30 19:04:11 INFO5 check_wapp_levels: WAPP power levels are between 0.697 and 1.128 (still bad) 2008-Apr-30 19:04:13 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.900 and 1.127 2008-Apr-30 19:04:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.792 < 0.8)! 2008-Apr-30 19:04:19 LOG4 check_wapp_levels: WAPP-1 power levels: 0.954 0.792 1.127 1.050 2008-Apr-30 19:04:19 LOG4 check_wapp_levels: WAPP-2 power levels: 1.004 0.920 0.948 1.033 2008-Apr-30 19:04:19 LOG4 check_wapp_levels: WAPP-3 power levels: 1.113 0.916 1.025 0.903 2008-Apr-30 19:04:19 LOG4 check_wapp_levels: WAPP-4 power levels: 1.047 1.012 0.910 0.900 2008-Apr-30 19:04:21 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.899 and 1.126 2008-Apr-30 19:04:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.732 < 0.8)! 2008-Apr-30 19:04:27 LOG4 check_wapp_levels: WAPP-1 power levels: 0.957 0.732 1.129 1.050 2008-Apr-30 19:04:27 LOG4 check_wapp_levels: WAPP-2 power levels: 1.006 0.920 0.947 1.033 2008-Apr-30 19:04:27 LOG4 check_wapp_levels: WAPP-3 power levels: 1.112 0.914 1.025 0.904 2008-Apr-30 19:04:27 LOG4 check_wapp_levels: WAPP-4 power levels: 1.046 1.012 0.910 0.900 2008-Apr-30 19:04:29 INFO5 check_wapp_levels: WAPP power levels are between 0.732 and 1.129 (still bad) 2008-Apr-30 19:04:31 INFO5 check_wapp_levels: WAPP power levels are between 0.703 and 1.129 (still bad) 2008-Apr-30 19:04:33 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.900 and 1.128 2008-Apr-30 19:04:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-30 19:04:34 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-30 19:04:34 LOG5 end_task: Level: (4) ID = <10132> Status = 0 0 0 0 ok 2008-Apr-30 19:04:34 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-30 19:04:34 LOG5 end_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2008-Apr-30 19:04:34 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-30 19:04:34 LOG5 finish_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2008-Apr-30 19:04:34 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-30 19:04:34 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-30 19:04:34 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-30 19:04:34 LOG5 end_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2008-Apr-30 19:04:34 COMMAND run_command_line: EXECUTING command 11: 'FIXEDDRIFT az=237.13 alfaangle=-37.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p1_016 ra=95300.00 dec=233030.00' 2008-Apr-30 19:04:34 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-30 19:04:35 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-30 19:04:35 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 237.13 -37.3 hcorcal 5 tracking no first 1 AGES3193_p1_016 95300.00 233030.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-30 19:04:35 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-30 19:04:35 LOG5 begin_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2008-Apr-30 19:04:35 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES3193_p1_014' 2008-Apr-30 19:04:35 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-30 19:04:35 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p1_016} 2008-Apr-30 19:04:35 INFO3 fixed_driftmap: Sending telescope to Az = 237.13 and ZA = 9.84 2008-Apr-30 19:04:35 LOG3 track_source: Calling 'track_source AGES3193_p1_016 237.13 9.8372678224 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-30 19:04:35 START begin_task: Starting task 'sending tracking commands' 2008-Apr-30 19:04:35 LOG5 begin_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2008-Apr-30 19:04:35 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p1_016} INFO {Slewing to source 'AGES3193_p1_016' ...} 2008-Apr-30 19:04:35 INFO1 track_source: Starting to track AGES3193_p1_016 2008-Apr-30 19:04:35 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p1_016" 2008-Apr-30 19:04:35 LOG3 vw_send: To DATATAKING: set ra 237.13 2008-Apr-30 19:04:35 LOG3 vw_send: To DATATAKING: set dec 9.8372678224 2008-Apr-30 19:04:35 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-30 19:04:35 LOG3 vw_send: To DATATAKING: pnt tr 237.13 9.8372678224 -CF 2008-Apr-30 19:04:35 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-30 19:04:35 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-30 19:04:35 LOG5 finish_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2008-Apr-30 19:04:35 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-30 19:04:35 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 19:04:35 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-30 19:04:35 LOG5 end_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2008-Apr-30 19:04:35 START begin_task: Starting task 'rotate ALFA to -37.3 degrees' 2008-Apr-30 19:04:35 LOG5 begin_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2008-Apr-30 19:04:35 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -37.3 degrees ...} 2008-Apr-30 19:04:35 INFO2 rotate_alfa: ALFA commanded to -37.3 degrees 2008-Apr-30 19:04:35 LOG3 sock_errsend: To ALFAMOTOR: POSITION -37.3 REPLY 2008-Apr-30 19:04:35 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-30 19:04:35 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-30 19:04:35 LOG5 begin_task: Level: (4) ID = <10136> Status = 0 0 0 0 ok 2008-Apr-30 19:04:35 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p1_016" 2008-Apr-30 19:04:35 LOG4 got_cormsg: From DATATAKING: set ra 237.13 2008-Apr-30 19:04:35 LOG4 got_cormsg: From DATATAKING: set dec 9.8372678224 2008-Apr-30 19:04:35 LOG4 got_cormsg: From DATATAKING: vw% 237.13 2008-Apr-30 19:04:35 LOG4 got_cormsg: From DATATAKING: vw% 9.8372678224 2008-Apr-30 19:04:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 19:04:35 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-30 19:04:35 LOG4 got_cormsg: From DATATAKING: pnt tr 237.13 9.8372678224 -CF 2008-Apr-30 19:04:35 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-30 19:04:35 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-30 19:04:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 19:04:44 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-30 19:04:44 INFO3 alfa_motor: ALFA rotator in-position -37.30 degrees 2008-Apr-30 19:04:44 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-30 19:04:44 LOG5 end_task: Level: (4) ID = <10136> Status = 0 0 0 0 ok 2008-Apr-30 19:04:44 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-30 19:04:44 STOP finish_task: Finishing task 'rotate ALFA to -37.3 degrees' 2008-Apr-30 19:04:44 LOG5 finish_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2008-Apr-30 19:04:44 INFO2 finish_task: DONE finished configuration: rotating ALFA to -37.3 degrees 2008-Apr-30 19:04:44 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 19:04:44 STOP end_task: Finishing task 'rotate ALFA to -37.3 degrees' with status 'OK' 2008-Apr-30 19:04:44 LOG5 end_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2008-Apr-30 19:04:44 START begin_task: Starting task 'waiting on telescope' 2008-Apr-30 19:04:44 LOG5 begin_task: Level: (3) ID = <10137> Status = 0 0 0 0 ok 2008-Apr-30 19:04:44 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-30 19:04:44 LOG3 waittrk: Start waittrk 5 2008-Apr-30 19:04:44 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-30 19:04:44 LOG5 begin_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2008-Apr-30 19:04:49 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-30 19:04:49 LOG5 end_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2008-Apr-30 19:04:49 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-30 19:04:49 LOG5 begin_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2008-Apr-30 19:06:42 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-30 19:06:42 LOG5 end_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2008-Apr-30 19:06:42 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-30 19:06:42 INFO2 waittrk: Now tracking AGES3193_p1_016 2008-Apr-30 19:06:42 LOG4 waittrk: Current telescope position: Az = 236.65 ZA = 9.85 2008-Apr-30 19:06:42 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-30 19:06:42 LOG5 finish_task: Level: (3) ID = <10137> Status = 0 0 0 0 ok 2008-Apr-30 19:06:42 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-30 19:06:42 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 19:06:42 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-30 19:06:42 LOG5 end_task: Level: (3) ID = <10137> Status = 0 0 0 0 ok 2008-Apr-30 19:06:42 START begin_task: Starting task 'selecting calibration type' 2008-Apr-30 19:06:42 LOG5 begin_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2008-Apr-30 19:06:43 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-30 19:06:43 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-30 19:06:43 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 19:06:43 START begin_task: Starting task 'waiting on setcal' 2008-Apr-30 19:06:43 LOG5 begin_task: Level: (4) ID = <10141> Status = 0 0 0 0 ok 2008-Apr-30 19:06:43 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-30 19:06:43 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 19:06:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 19:06:43 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-30 19:06:43 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-30 19:06:43 LOG5 end_task: Level: (4) ID = <10141> Status = 0 0 0 0 ok 2008-Apr-30 19:06:43 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-30 19:06:43 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-30 19:06:43 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-30 19:06:43 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-30 19:06:43 LOG5 begin_task: Level: (4) ID = <10142> Status = 0 0 0 0 ok 2008-Apr-30 19:06:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 19:06:43 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-30 19:06:43 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-30 19:06:43 LOG5 end_task: Level: (4) ID = <10142> Status = 0 0 0 0 ok 2008-Apr-30 19:06:44 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-30 19:06:44 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-30 19:06:44 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-30 19:06:44 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-30 19:06:44 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-30 19:06:44 LOG5 begin_task: Level: (4) ID = <10143> Status = 0 0 0 0 ok 2008-Apr-30 19:06:44 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-30 19:06:44 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-30 19:06:44 LOG5 end_task: Level: (4) ID = <10143> Status = 0 0 0 0 ok 2008-Apr-30 19:06:44 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-30 19:06:44 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-30 19:06:44 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-30 19:06:44 LOG5 finish_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2008-Apr-30 19:06:44 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-30 19:06:44 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 19:06:44 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-30 19:06:44 LOG5 end_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2008-Apr-30 19:06:44 LOG5 dopset_later: Calling 'dopset_later 45.679054037303018' 2008-Apr-30 19:06:44 INFO3 dopset_later: Setting Doppler correction for 19:07:29 (45.7 seconds from now) 2008-Apr-30 19:06:44 LOG5 antvel: Calling 'antvel 237.130000 9.837268 F 45.679054037303018' 2008-Apr-30 19:06:44 LOG2 antvel: Parameters to Doppler: Heliocentric 83249 2008 121 0.0 2008-Apr-30 19:06:44 INFO5 antvel: Computed antenna velocity: +28.37281 km/s 2008-Apr-30 19:06:44 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=28.372814203299999 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-30 19:06:44 INFO4 dopset_gen: New sky frequencies: 1381.112718 1381.112718 1381.112718 1381.112718 1381.112718 1381.112718 1381.112718 1381.112718 1381.112718 2008-Apr-30 19:06:44 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.112718 sky0=1381.112718 sky1=1381.112718 sky2=1381.112718 sky3=1381.112718 sky4=1381.112718 sky5=1381.112718 sky6=1381.112718 sky7=1381.112718 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-30 19:06:44 LOG2 dopset_gen: Result from 'sky2syn': 1631.112718 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-30 19:06:44 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631112718.0} 2008-Apr-30 19:06:44 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 19:06:44 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-30 19:06:44 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-30 19:06:44 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:18.3 Dec = +23:30:32.7 2008-Apr-30 19:06:44 LOG3 track_source: Calling 'track_source AGES3193_p1_016 095218.3 233032.7 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-30 19:06:44 START begin_task: Starting task 'sending tracking commands' 2008-Apr-30 19:06:44 LOG5 begin_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2008-Apr-30 19:06:44 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p1_016} INFO {Slewing to source 'AGES3193_p1_016' ...} 2008-Apr-30 19:06:44 INFO1 track_source: Starting to track AGES3193_p1_016 2008-Apr-30 19:06:44 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p1_016" 2008-Apr-30 19:06:44 LOG3 vw_send: To DATATAKING: set ra 095218.3 2008-Apr-30 19:06:44 LOG3 vw_send: To DATATAKING: set dec 233032.7 2008-Apr-30 19:06:44 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-30 19:06:44 LOG3 vw_send: To DATATAKING: pnt tr 095218.3 233032.7 -CJ 2008-Apr-30 19:06:44 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-30 19:06:44 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-30 19:06:44 LOG5 finish_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2008-Apr-30 19:06:44 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-30 19:06:44 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 19:06:44 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-30 19:06:44 LOG5 end_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2008-Apr-30 19:06:44 START begin_task: Starting task 'waiting on telescope' 2008-Apr-30 19:06:44 LOG5 begin_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2008-Apr-30 19:06:44 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-30 19:06:44 LOG3 waittrk: Start waittrk 5 2008-Apr-30 19:06:44 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-30 19:06:44 LOG5 begin_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2008-Apr-30 19:06:44 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631112718.0} 2008-Apr-30 19:06:44 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 19:06:44 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p1_016" 2008-Apr-30 19:06:44 LOG4 got_cormsg: From DATATAKING: set ra 095218.3 2008-Apr-30 19:06:44 LOG4 got_cormsg: From DATATAKING: set dec 233032.7 2008-Apr-30 19:06:44 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-30 19:06:44 LOG4 got_cormsg: From DATATAKING: vw% 095218.3 2008-Apr-30 19:06:44 LOG4 got_cormsg: From DATATAKING: vw% 233032.7 2008-Apr-30 19:06:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 19:06:44 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-30 19:06:44 LOG4 got_cormsg: From DATATAKING: pnt tr 095218.3 233032.7 -CJ 2008-Apr-30 19:06:44 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-30 19:06:44 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-30 19:06:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 19:06:49 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-30 19:06:49 LOG5 end_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2008-Apr-30 19:06:49 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-30 19:06:49 LOG5 begin_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2008-Apr-30 19:06:51 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-30 19:06:51 LOG5 end_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2008-Apr-30 19:06:51 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-30 19:06:51 INFO2 waittrk: Now tracking AGES3193_p1_016 2008-Apr-30 19:06:51 LOG4 waittrk: Current telescope position: Az = 236.60 ZA = 9.83 2008-Apr-30 19:06:51 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-30 19:06:51 LOG5 finish_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2008-Apr-30 19:06:51 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-30 19:06:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 19:06:51 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-30 19:06:51 LOG5 end_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2008-Apr-30 19:06:51 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-30 19:06:51 LOG5 begin_task: Level: (3) ID = <10148> Status = 0 0 0 0 ok 2008-Apr-30 19:06:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-30 19:06:51 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-30 19:06:51 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-30 19:06:52 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-30 19:06:52 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 19:06:52 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-30 19:06:52 LOG5 begin_task: Level: (4) ID = <10149> Status = 0 0 0 0 ok 2008-Apr-30 19:06:52 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-30 19:06:52 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 19:06:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 19:06:54 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-30 19:06:54 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-30 19:06:54 LOG5 end_task: Level: (4) ID = <10149> Status = 0 0 0 0 ok 2008-Apr-30 19:06:54 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-30 19:06:54 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-30 19:06:54 LOG5 begin_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2008-Apr-30 19:06:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-30 19:06:54 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-30 19:06:54 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-30 19:06:55 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-30 19:06:55 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-30 19:06:55 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-30 19:06:55 LOG5 begin_task: Level: (5) ID = <10151> Status = 0 0 0 0 ok 2008-Apr-30 19:06:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 19:06:55 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-30 19:06:55 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 0 dB --- beam 1: 7 6 dB 2008-Apr-30 19:06:55 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 3 dB --- beam 3: 4 3 dB 2008-Apr-30 19:06:55 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 2 dB --- beam 5: 6 5 dB 2008-Apr-30 19:06:55 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 2 2 dB 2008-Apr-30 19:06:55 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-30 19:06:55 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-30 19:06:55 LOG5 end_task: Level: (5) ID = <10151> Status = 0 0 0 0 ok 2008-Apr-30 19:06:55 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.918 0.791 ALFA beam 1: 1.093 1.027 2008-Apr-30 19:06:55 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.968 1.085 ALFA beam 3: 0.912 0.988 2008-Apr-30 19:06:55 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.069 1.097 ALFA beam 5: 0.988 1.110 2008-Apr-30 19:06:55 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.011 0.989 ALFA beam 7: 1.100 1.097 2008-Apr-30 19:06:55 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-30 19:06:55 LOG5 finish_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2008-Apr-30 19:06:55 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-30 19:06:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 19:06:55 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-30 19:06:55 LOG5 end_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2008-Apr-30 19:06:55 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-30 19:06:55 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-30 19:06:55 LOG5 finish_task: Level: (3) ID = <10148> Status = 0 0 0 0 ok 2008-Apr-30 19:06:55 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-30 19:06:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 19:06:55 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-30 19:06:55 LOG5 end_task: Level: (3) ID = <10148> Status = 0 0 0 0 ok 2008-Apr-30 19:06:55 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 SS 2008-Apr-30 19:06:55 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 SS 2008-Apr-30 19:06:55 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 SS 2008-Apr-30 19:06:55 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 SS 2008-Apr-30 19:06:55 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-30 19:06:55 START begin_task: Starting task 'WAPP calibration' 2008-Apr-30 19:06:55 LOG5 begin_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2008-Apr-30 19:06:55 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-30 19:06:55 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-30 19:06:55 START begin_task: Starting task 'selecting calibration type' 2008-Apr-30 19:06:55 LOG5 begin_task: Level: (4) ID = <10153> Status = 0 0 0 0 ok 2008-Apr-30 19:06:55 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-30 19:06:56 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-30 19:06:56 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 19:06:56 START begin_task: Starting task 'waiting on setcal' 2008-Apr-30 19:06:56 LOG5 begin_task: Level: (5) ID = <10154> Status = 0 0 0 0 ok 2008-Apr-30 19:06:56 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 SS' 2008-Apr-30 19:06:56 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-30 19:06:56 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 19:06:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 19:06:56 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-30 19:06:56 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-30 19:06:56 LOG5 end_task: Level: (5) ID = <10154> Status = 0 0 0 0 ok 2008-Apr-30 19:06:56 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-30 19:06:56 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-30 19:06:56 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-30 19:06:56 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-30 19:06:56 LOG5 begin_task: Level: (5) ID = <10155> Status = 0 0 0 0 ok 2008-Apr-30 19:06:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 19:06:56 NOTE WAPPDATA-new_file: New FITS file: wapp.20080430.a2048.0002.fits 2008-Apr-30 19:06:56 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080430.a2048.0002.fits} 2008-Apr-30 19:06:56 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-30 19:06:56 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-30 19:06:56 LOG5 end_task: Level: (5) ID = <10155> Status = 0 0 0 0 ok 2008-Apr-30 19:06:56 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-30 19:06:56 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-30 19:06:56 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-30 19:06:56 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-30 19:06:56 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-30 19:06:56 LOG5 begin_task: Level: (5) ID = <10156> Status = 0 0 0 0 ok 2008-Apr-30 19:06:56 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-30 19:06:56 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-30 19:06:56 LOG5 end_task: Level: (5) ID = <10156> Status = 0 0 0 0 ok 2008-Apr-30 19:06:56 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-30 19:06:56 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-30 19:06:56 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-30 19:06:56 LOG5 finish_task: Level: (4) ID = <10153> Status = 0 0 0 0 ok 2008-Apr-30 19:06:56 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-30 19:06:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 19:06:56 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-30 19:06:56 LOG5 end_task: Level: (4) ID = <10153> Status = 0 0 0 0 ok 2008-Apr-30 19:06:56 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-30 19:06:56 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-30 19:06:56 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-30 19:06:56 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-30 19:06:56 LOG5 begin_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2008-Apr-30 19:06:57 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-30 19:06:57 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-30 19:06:57 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-30 19:06:57 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-30 19:06:57 LOG5 end_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2008-Apr-30 19:06:57 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-30 19:06:57 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-30 19:06:57 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-30 19:06:57 LOG5 begin_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2008-Apr-30 19:06:57 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-30 19:06:57 LOG5 log_alfabeam: Parameters: 9.8717500000000005 23.509083333333336 9.282346 2008.3334605926941 -37.300034 2008-Apr-30 19:06:57 LOG4 log_alfabeam: ALFABEAM 0 9.871749999999997 23.509083333333344 2008-Apr-30 19:06:57 LOG4 log_alfabeam: ALFABEAM 1 9.872164451597111 23.415579028662055 2008-Apr-30 19:06:57 LOG4 log_alfabeam: ALFABEAM 2 9.878453672935064 23.477537564654952 2008-Apr-30 19:06:57 LOG4 log_alfabeam: ALFABEAM 3 9.878003153557890 23.571822458133830 2008-Apr-30 19:06:57 LOG4 log_alfabeam: ALFABEAM 4 9.871264264546586 23.602838848400204 2008-Apr-30 19:06:57 LOG4 log_alfabeam: ALFABEAM 5 9.865043792004016 23.539475282803142 2008-Apr-30 19:06:57 LOG4 log_alfabeam: ALFABEAM 6 9.865492969297089 23.446496639619621 2008-Apr-30 19:06:57 INFO2 take_spectra: Starting WAPP scan: 812100102 2008-Apr-30 19:06:57 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-30 19:06:57 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-30 19:06:57 LOG5 begin_task: Level: (5) ID = <10159> Status = 0 0 0 0 ok 2008-Apr-30 19:06:57 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-30 19:06:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.791 < 0.8)! 2008-Apr-30 19:06:57 LOG4 check_wapp_levels: WAPP-1 power levels: 0.918 0.791 1.093 1.027 2008-Apr-30 19:06:57 LOG4 check_wapp_levels: WAPP-2 power levels: 0.968 1.085 0.912 0.988 2008-Apr-30 19:06:57 LOG4 check_wapp_levels: WAPP-3 power levels: 1.069 1.097 0.988 1.110 2008-Apr-30 19:06:57 LOG4 check_wapp_levels: WAPP-4 power levels: 1.011 0.989 1.100 1.097 2008-Apr-30 19:06:57 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83218.00 2008-Apr-30 19:07:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.112718 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-30 19:07:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.112718 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 19:07:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.112718 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 19:07:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.112718 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-30 19:07:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.112718 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 19:07:03 INFO5 check_wapp_levels: WAPP power levels are between 0.791 and 1.110 (still bad) 2008-Apr-30 19:07:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.112718 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 19:07:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.112718 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 19:07:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.112718 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 19:07:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.112718 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 19:07:03 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-30 19:07:03 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-30 19:07:03 LOG5 end_task: Level: (5) ID = <10159> Status = 0 0 0 0 ok 2008-Apr-30 19:07:03 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-30 19:07:03 LOG5 end_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2008-Apr-30 19:07:03 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-30 19:07:03 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-30 19:07:03 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-30 19:07:03 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-30 19:07:03 LOG5 begin_task: Level: (4) ID = <10160> Status = 0 0 0 0 ok 2008-Apr-30 19:07:03 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-30 19:07:03 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-30 19:07:03 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-30 19:07:03 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-30 19:07:03 LOG5 end_task: Level: (4) ID = <10160> Status = 0 0 0 0 ok 2008-Apr-30 19:07:03 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-30 19:07:03 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-30 19:07:03 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-30 19:07:03 LOG5 begin_task: Level: (4) ID = <10161> Status = 0 0 0 0 ok 2008-Apr-30 19:07:03 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-30 19:07:03 LOG5 log_alfabeam: Parameters: 9.8717500000000005 23.509083333333336 9.284296 2008.3334608145108 -37.300034 2008-Apr-30 19:07:03 LOG4 log_alfabeam: ALFABEAM 0 9.871749999999995 23.509083333333344 2008-Apr-30 19:07:03 LOG4 log_alfabeam: ALFABEAM 1 9.872174911977112 23.415588303088910 2008-Apr-30 19:07:03 LOG4 log_alfabeam: ALFABEAM 2 9.878457228377274 23.477679434460878 2008-Apr-30 19:07:03 LOG4 log_alfabeam: ALFABEAM 3 9.877996052522249 23.571956169659803 2008-Apr-30 19:07:03 LOG4 log_alfabeam: ALFABEAM 4 9.871253589388468 23.602828657970395 2008-Apr-30 19:07:03 LOG4 log_alfabeam: ALFABEAM 5 9.865040374248709 23.539330716790062 2008-Apr-30 19:07:03 LOG4 log_alfabeam: ALFABEAM 6 9.865500028812903 23.446363350957455 2008-Apr-30 19:07:03 INFO2 take_spectra: Starting WAPP scan: 812100103 2008-Apr-30 19:07:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-30 19:07:04 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-30 19:07:04 LOG5 begin_task: Level: (5) ID = <10162> Status = 0 0 0 0 ok 2008-Apr-30 19:07:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-30 19:07:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83225.00 2008-Apr-30 19:07:09 INFO5 check_wapp_levels: WAPP power levels are between 0.979 and 1.546 (still bad) 2008-Apr-30 19:07:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.112718 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-30 19:07:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.112718 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 19:07:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.112718 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 19:07:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.112718 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-30 19:07:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.112718 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 19:07:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.112718 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 19:07:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.112718 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 19:07:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.112718 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 19:07:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.112718 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 19:07:10 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-30 19:07:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-30 19:07:10 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-30 19:07:10 LOG5 end_task: Level: (5) ID = <10162> Status = 0 0 0 0 ok 2008-Apr-30 19:07:10 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-30 19:07:10 LOG5 end_task: Level: (4) ID = <10161> Status = 0 0 0 0 ok 2008-Apr-30 19:07:10 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-30 19:07:10 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-30 19:07:10 LOG5 finish_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2008-Apr-30 19:07:10 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-30 19:07:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 19:07:10 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-30 19:07:10 LOG5 end_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2008-Apr-30 19:07:10 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-30 19:07:10 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 237.13 and ZA = 9.84 2008-Apr-30 19:07:10 LOG3 track_source: Calling 'track_source AGES3193_p1_016 237.13 9.8372678224 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-30 19:07:10 START begin_task: Starting task 'sending tracking commands' 2008-Apr-30 19:07:10 LOG5 begin_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2008-Apr-30 19:07:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p1_016} INFO {Slewing to source 'AGES3193_p1_016' ...} 2008-Apr-30 19:07:10 INFO1 track_source: Starting to track AGES3193_p1_016 2008-Apr-30 19:07:10 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p1_016" 2008-Apr-30 19:07:10 LOG3 vw_send: To DATATAKING: set ra 237.13 2008-Apr-30 19:07:10 LOG3 vw_send: To DATATAKING: set dec 9.8372678224 2008-Apr-30 19:07:10 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-30 19:07:10 LOG3 vw_send: To DATATAKING: pnt tr 237.13 9.8372678224 -CF 2008-Apr-30 19:07:10 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-30 19:07:10 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-30 19:07:10 LOG5 finish_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2008-Apr-30 19:07:10 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-30 19:07:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 19:07:11 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-30 19:07:11 LOG5 end_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2008-Apr-30 19:07:11 LOG1 fixed_driftmap: Parameters: HA = -00:36:00.1 Start = 09:17:29.2 LST = 09:17:10.5 diff = 18.7 secs 2008-Apr-30 19:07:11 INFO2 fixed_driftmap: Waiting 16.7 seconds for RA 9:53:29 2008-Apr-30 19:07:11 INFO2 lstwait: Waiting for 16.7 secs from LST 09:17:10 to LST 09:17:27 ... 2008-Apr-30 19:07:11 LOG4 send_obs_status: To obs_status: <1> TASKTIME 16.682842055540711 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-30 19:07:11 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-30 19:07:11 LOG5 begin_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2008-Apr-30 19:07:11 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p1_016" 2008-Apr-30 19:07:11 LOG4 got_cormsg: From DATATAKING: set ra 237.13 2008-Apr-30 19:07:11 LOG4 got_cormsg: From DATATAKING: set dec 9.8372678224 2008-Apr-30 19:07:11 LOG4 got_cormsg: From DATATAKING: vw% 237.13 2008-Apr-30 19:07:11 LOG4 got_cormsg: From DATATAKING: vw% 9.8372678224 2008-Apr-30 19:07:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 19:07:11 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-30 19:07:11 LOG4 got_cormsg: From DATATAKING: pnt tr 237.13 9.8372678224 -CF 2008-Apr-30 19:07:11 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-30 19:07:11 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-30 19:07:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 19:07:15 INFO5 check_wapp_levels: WAPP power levels are between 0.728 and 1.111 (still bad) 2008-Apr-30 19:07:27 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-30 19:07:27 LOG5 end_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2008-Apr-30 19:07:27 LOG4 lstwait: Finished waiting, the gui caused difference: 0.31748240000482042 2008-Apr-30 19:07:27 INFO3 lstwait: Finished waiting 2008-Apr-30 19:07:27 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-30 19:07:27 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-30 19:07:27 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-30 19:07:27 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-30 19:07:27 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-30 19:07:27 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-30 19:07:27 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-30 19:07:27 LOG5 begin_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2008-Apr-30 19:07:27 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-30 19:07:27 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-30 19:07:27 INFO2 take_spectra: Starting WAPP scan: 812100104 2008-Apr-30 19:07:28 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-30 19:07:28 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-30 19:07:28 LOG5 begin_task: Level: (4) ID = <10166> Status = 0 0 0 0 ok 2008-Apr-30 19:07:28 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-30 19:07:28 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83249.00 2008-Apr-30 19:07:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.112718 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-30 19:07:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.112718 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 19:07:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.112718 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 19:07:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.112718 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-30 19:07:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.112718 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 19:07:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.112718 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 19:07:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.112718 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 19:07:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.112718 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 19:07:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.112718 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 19:07:30 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.913 and 1.113 2008-Apr-30 19:08:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.709 < 0.8)! 2008-Apr-30 19:08:11 LOG4 check_wapp_levels: WAPP-1 power levels: 0.921 0.709 1.095 1.029 2008-Apr-30 19:08:11 LOG4 check_wapp_levels: WAPP-2 power levels: 0.968 1.113 0.915 0.992 2008-Apr-30 19:08:11 LOG4 check_wapp_levels: WAPP-3 power levels: 1.075 1.110 0.992 1.117 2008-Apr-30 19:08:11 LOG4 check_wapp_levels: WAPP-4 power levels: 1.017 0.992 1.106 1.101 2008-Apr-30 19:08:13 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.828 and 1.118 2008-Apr-30 19:08:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.757 < 0.8)! 2008-Apr-30 19:08:17 LOG4 check_wapp_levels: WAPP-1 power levels: 0.919 0.757 1.094 1.028 2008-Apr-30 19:08:17 LOG4 check_wapp_levels: WAPP-2 power levels: 0.969 1.115 0.914 0.992 2008-Apr-30 19:08:17 LOG4 check_wapp_levels: WAPP-3 power levels: 1.077 1.108 0.990 1.115 2008-Apr-30 19:08:17 LOG4 check_wapp_levels: WAPP-4 power levels: 1.016 0.992 1.106 1.103 2008-Apr-30 19:08:19 INFO5 check_wapp_levels: WAPP power levels are between 0.729 and 1.116 (still bad) 2008-Apr-30 19:08:21 INFO5 check_wapp_levels: WAPP power levels are between 0.758 and 1.117 (still bad) 2008-Apr-30 19:08:23 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.913 and 1.117 2008-Apr-30 19:08:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.786 < 0.8)! 2008-Apr-30 19:08:27 LOG4 check_wapp_levels: WAPP-1 power levels: 0.916 0.786 1.095 1.028 2008-Apr-30 19:08:27 LOG4 check_wapp_levels: WAPP-2 power levels: 0.968 1.116 0.914 0.991 2008-Apr-30 19:08:27 LOG4 check_wapp_levels: WAPP-3 power levels: 1.077 1.110 0.989 1.115 2008-Apr-30 19:08:27 LOG4 check_wapp_levels: WAPP-4 power levels: 1.016 0.991 1.106 1.101 2008-Apr-30 19:08:29 INFO5 check_wapp_levels: WAPP power levels are between 0.781 and 1.117 (still bad) 2008-Apr-30 19:08:31 INFO5 check_wapp_levels: WAPP power levels are between 0.777 and 1.116 (still bad) 2008-Apr-30 19:08:33 INFO5 check_wapp_levels: WAPP power levels are between 0.777 and 1.115 (still bad) 2008-Apr-30 19:08:35 INFO5 check_wapp_levels: WAPP power levels are between 0.775 and 1.116 (still bad) 2008-Apr-30 19:08:37 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.829 and 1.117 2008-Apr-30 19:08:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.601 < 0.8)! 2008-Apr-30 19:08:39 LOG4 check_wapp_levels: WAPP-1 power levels: 0.915 0.601 1.097 1.029 2008-Apr-30 19:08:39 LOG4 check_wapp_levels: WAPP-2 power levels: 0.966 1.115 0.914 0.992 2008-Apr-30 19:08:39 LOG4 check_wapp_levels: WAPP-3 power levels: 1.079 1.108 0.989 1.114 2008-Apr-30 19:08:39 LOG4 check_wapp_levels: WAPP-4 power levels: 1.018 0.992 1.107 1.102 2008-Apr-30 19:08:41 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.915 and 1.116 2008-Apr-30 19:08:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.555 < 0.8)! 2008-Apr-30 19:08:53 LOG4 check_wapp_levels: WAPP-1 power levels: 0.918 0.555 1.096 1.027 2008-Apr-30 19:08:53 LOG4 check_wapp_levels: WAPP-2 power levels: 0.967 1.115 0.915 0.992 2008-Apr-30 19:08:53 LOG4 check_wapp_levels: WAPP-3 power levels: 1.079 1.111 0.989 1.116 2008-Apr-30 19:08:53 LOG4 check_wapp_levels: WAPP-4 power levels: 1.017 0.992 1.106 1.103 2008-Apr-30 19:08:55 INFO5 check_wapp_levels: WAPP power levels are between 0.745 and 1.116 (still bad) 2008-Apr-30 19:08:57 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.830 and 1.117 2008-Apr-30 19:08:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.674 < 0.8)! 2008-Apr-30 19:08:59 LOG4 check_wapp_levels: WAPP-1 power levels: 0.921 0.674 1.097 1.030 2008-Apr-30 19:08:59 LOG4 check_wapp_levels: WAPP-2 power levels: 0.967 1.116 0.914 0.992 2008-Apr-30 19:08:59 LOG4 check_wapp_levels: WAPP-3 power levels: 1.079 1.109 0.988 1.116 2008-Apr-30 19:08:59 LOG4 check_wapp_levels: WAPP-4 power levels: 1.017 0.991 1.107 1.102 2008-Apr-30 19:09:01 INFO5 check_wapp_levels: WAPP power levels are between 0.731 and 1.116 (still bad) 2008-Apr-30 19:09:03 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.871 and 1.116 2008-Apr-30 19:09:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.683 < 0.8)! 2008-Apr-30 19:09:42 LOG4 check_wapp_levels: WAPP-1 power levels: 0.919 0.683 1.098 1.027 2008-Apr-30 19:09:42 LOG4 check_wapp_levels: WAPP-2 power levels: 0.971 1.121 0.918 0.993 2008-Apr-30 19:09:42 LOG4 check_wapp_levels: WAPP-3 power levels: 1.077 1.107 0.990 1.116 2008-Apr-30 19:09:42 LOG4 check_wapp_levels: WAPP-4 power levels: 1.017 0.991 1.107 1.101 2008-Apr-30 19:09:44 INFO5 check_wapp_levels: WAPP power levels are between 0.786 and 1.120 (still bad) 2008-Apr-30 19:09:46 INFO5 check_wapp_levels: WAPP power levels are between 0.676 and 1.119 (still bad) 2008-Apr-30 19:09:48 INFO5 check_wapp_levels: WAPP power levels are between 0.591 and 1.120 (still bad) 2008-Apr-30 19:09:50 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.917 and 1.118 2008-Apr-30 19:09:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.789 < 0.8)! 2008-Apr-30 19:09:52 LOG4 check_wapp_levels: WAPP-1 power levels: 0.922 0.789 1.098 1.028 2008-Apr-30 19:09:52 LOG4 check_wapp_levels: WAPP-2 power levels: 0.970 1.117 0.917 0.992 2008-Apr-30 19:09:52 LOG4 check_wapp_levels: WAPP-3 power levels: 1.078 1.107 0.991 1.116 2008-Apr-30 19:09:52 LOG4 check_wapp_levels: WAPP-4 power levels: 1.016 0.991 1.108 1.099 2008-Apr-30 19:09:54 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.918 and 1.118 2008-Apr-30 19:10:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.696 < 0.8)! 2008-Apr-30 19:10:12 LOG4 check_wapp_levels: WAPP-1 power levels: 0.925 0.696 1.116 1.048 2008-Apr-30 19:10:12 LOG4 check_wapp_levels: WAPP-2 power levels: 0.969 1.116 0.930 1.009 2008-Apr-30 19:10:12 LOG4 check_wapp_levels: WAPP-3 power levels: 1.077 1.107 0.992 1.116 2008-Apr-30 19:10:12 LOG4 check_wapp_levels: WAPP-4 power levels: 1.017 0.993 1.107 1.101 2008-Apr-30 19:10:14 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.895 and 1.118 2008-Apr-30 19:10:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.721 < 0.8)! 2008-Apr-30 19:10:16 LOG4 check_wapp_levels: WAPP-1 power levels: 0.924 0.721 1.118 1.049 2008-Apr-30 19:10:16 LOG4 check_wapp_levels: WAPP-2 power levels: 0.966 1.116 0.923 1.001 2008-Apr-30 19:10:16 LOG4 check_wapp_levels: WAPP-3 power levels: 1.076 1.107 0.992 1.116 2008-Apr-30 19:10:16 LOG4 check_wapp_levels: WAPP-4 power levels: 1.017 0.992 1.107 1.101 2008-Apr-30 19:10:18 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.807 and 1.118 2008-Apr-30 19:10:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.565 < 0.8)! 2008-Apr-30 19:10:20 LOG4 check_wapp_levels: WAPP-1 power levels: 0.927 0.565 1.112 1.043 2008-Apr-30 19:10:20 LOG4 check_wapp_levels: WAPP-2 power levels: 0.968 1.116 0.919 0.996 2008-Apr-30 19:10:20 LOG4 check_wapp_levels: WAPP-3 power levels: 1.077 1.109 0.992 1.116 2008-Apr-30 19:10:20 LOG4 check_wapp_levels: WAPP-4 power levels: 1.017 0.992 1.107 1.100 2008-Apr-30 19:10:22 INFO5 check_wapp_levels: WAPP power levels are between 0.784 and 1.116 (still bad) 2008-Apr-30 19:10:24 INFO5 check_wapp_levels: WAPP power levels are between 0.581 and 1.115 (still bad) 2008-Apr-30 19:10:26 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.883 and 1.115 2008-Apr-30 19:10:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.602 < 0.8)! 2008-Apr-30 19:10:30 LOG4 check_wapp_levels: WAPP-1 power levels: 0.920 0.602 1.098 1.032 2008-Apr-30 19:10:30 LOG4 check_wapp_levels: WAPP-2 power levels: 0.967 1.114 0.915 0.991 2008-Apr-30 19:10:30 LOG4 check_wapp_levels: WAPP-3 power levels: 1.090 1.120 0.992 1.116 2008-Apr-30 19:10:30 LOG4 check_wapp_levels: WAPP-4 power levels: 1.019 0.996 1.110 1.103 2008-Apr-30 19:10:32 INFO5 check_wapp_levels: WAPP power levels are between 0.740 and 1.121 (still bad) 2008-Apr-30 19:10:34 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.881 and 1.120 2008-Apr-30 19:10:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.680 < 0.8)! 2008-Apr-30 19:10:44 LOG4 check_wapp_levels: WAPP-1 power levels: 0.921 0.680 1.098 1.030 2008-Apr-30 19:10:44 LOG4 check_wapp_levels: WAPP-2 power levels: 0.966 1.115 0.915 0.991 2008-Apr-30 19:10:44 LOG4 check_wapp_levels: WAPP-3 power levels: 1.076 1.105 0.999 1.126 2008-Apr-30 19:10:44 LOG4 check_wapp_levels: WAPP-4 power levels: 1.025 1.000 1.117 1.108 2008-Apr-30 19:10:46 INFO5 check_wapp_levels: WAPP power levels are between 0.591 and 1.128 (still bad) 2008-Apr-30 19:10:48 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.915 and 1.132 2008-Apr-30 19:10:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.726 < 0.8)! 2008-Apr-30 19:10:53 LOG4 check_wapp_levels: WAPP-1 power levels: 0.920 0.726 1.098 1.030 2008-Apr-30 19:10:53 LOG4 check_wapp_levels: WAPP-2 power levels: 0.967 1.114 0.914 0.991 2008-Apr-30 19:10:53 LOG4 check_wapp_levels: WAPP-3 power levels: 1.074 1.105 1.002 1.129 2008-Apr-30 19:10:53 LOG4 check_wapp_levels: WAPP-4 power levels: 1.017 0.995 1.109 1.103 2008-Apr-30 19:10:55 INFO5 check_wapp_levels: WAPP power levels are between 0.784 and 1.127 (still bad) 2008-Apr-30 19:10:57 INFO5 check_wapp_levels: WAPP power levels are between 0.600 and 1.126 (still bad) 2008-Apr-30 19:10:59 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.914 and 1.121 2008-Apr-30 19:11:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.790 < 0.8)! 2008-Apr-30 19:11:01 LOG4 check_wapp_levels: WAPP-1 power levels: 0.921 0.790 1.098 1.030 2008-Apr-30 19:11:01 LOG4 check_wapp_levels: WAPP-2 power levels: 0.968 1.114 0.913 0.989 2008-Apr-30 19:11:01 LOG4 check_wapp_levels: WAPP-3 power levels: 1.074 1.104 0.998 1.120 2008-Apr-30 19:11:01 LOG4 check_wapp_levels: WAPP-4 power levels: 1.017 0.995 1.108 1.103 2008-Apr-30 19:11:03 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.913 and 1.121 2008-Apr-30 19:11:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.754 < 0.8)! 2008-Apr-30 19:11:13 LOG4 check_wapp_levels: WAPP-1 power levels: 0.923 0.754 1.098 1.030 2008-Apr-30 19:11:13 LOG4 check_wapp_levels: WAPP-2 power levels: 0.968 1.113 0.914 0.989 2008-Apr-30 19:11:13 LOG4 check_wapp_levels: WAPP-3 power levels: 1.074 1.103 0.996 1.119 2008-Apr-30 19:11:13 LOG4 check_wapp_levels: WAPP-4 power levels: 1.016 0.994 1.107 1.101 2008-Apr-30 19:11:15 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.914 and 1.118 2008-Apr-30 19:11:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.655 < 0.8)! 2008-Apr-30 19:11:19 LOG4 check_wapp_levels: WAPP-1 power levels: 0.921 0.655 1.098 1.031 2008-Apr-30 19:11:19 LOG4 check_wapp_levels: WAPP-2 power levels: 0.967 1.113 0.915 0.990 2008-Apr-30 19:11:19 LOG4 check_wapp_levels: WAPP-3 power levels: 1.074 1.106 0.993 1.117 2008-Apr-30 19:11:19 LOG4 check_wapp_levels: WAPP-4 power levels: 1.015 0.994 1.107 1.101 2008-Apr-30 19:11:21 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.819 and 1.116 2008-Apr-30 19:11:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.580 < 0.8)! 2008-Apr-30 19:11:41 LOG4 check_wapp_levels: WAPP-1 power levels: 0.920 0.580 1.098 1.030 2008-Apr-30 19:11:41 LOG4 check_wapp_levels: WAPP-2 power levels: 0.968 1.113 0.914 0.992 2008-Apr-30 19:11:41 LOG4 check_wapp_levels: WAPP-3 power levels: 1.071 1.105 0.990 1.114 2008-Apr-30 19:11:41 LOG4 check_wapp_levels: WAPP-4 power levels: 1.014 0.993 1.105 1.100 2008-Apr-30 19:11:43 INFO5 check_wapp_levels: WAPP power levels are between 0.746 and 1.114 (still bad) 2008-Apr-30 19:11:45 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.914 and 1.113 2008-Apr-30 19:11:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.745 < 0.8)! 2008-Apr-30 19:11:49 LOG4 check_wapp_levels: WAPP-1 power levels: 0.922 0.745 1.100 1.031 2008-Apr-30 19:11:49 LOG4 check_wapp_levels: WAPP-2 power levels: 0.969 1.115 0.916 0.991 2008-Apr-30 19:11:49 LOG4 check_wapp_levels: WAPP-3 power levels: 1.073 1.102 0.992 1.113 2008-Apr-30 19:11:49 LOG4 check_wapp_levels: WAPP-4 power levels: 1.014 0.994 1.106 1.101 2008-Apr-30 19:11:51 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.804 and 1.114 2008-Apr-30 19:12:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.756 < 0.8)! 2008-Apr-30 19:12:05 LOG4 check_wapp_levels: WAPP-1 power levels: 0.920 0.756 1.098 1.029 2008-Apr-30 19:12:05 LOG4 check_wapp_levels: WAPP-2 power levels: 0.969 1.114 0.914 0.991 2008-Apr-30 19:12:05 LOG4 check_wapp_levels: WAPP-3 power levels: 1.073 1.106 0.990 1.115 2008-Apr-30 19:12:05 LOG4 check_wapp_levels: WAPP-4 power levels: 1.016 0.994 1.107 1.102 2008-Apr-30 19:12:07 INFO5 check_wapp_levels: WAPP power levels are between 0.606 and 1.113 (still bad) 2008-Apr-30 19:12:09 INFO5 check_wapp_levels: WAPP power levels are between 0.797 and 1.115 (still bad) 2008-Apr-30 19:12:11 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.805 and 1.115 2008-Apr-30 19:12:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.794 < 0.8)! 2008-Apr-30 19:12:14 LOG4 check_wapp_levels: WAPP-1 power levels: 0.921 0.794 1.100 1.030 2008-Apr-30 19:12:14 LOG4 check_wapp_levels: WAPP-2 power levels: 0.969 1.113 0.916 0.990 2008-Apr-30 19:12:14 LOG4 check_wapp_levels: WAPP-3 power levels: 1.073 1.106 0.990 1.115 2008-Apr-30 19:12:14 LOG4 check_wapp_levels: WAPP-4 power levels: 1.016 0.996 1.108 1.103 2008-Apr-30 19:12:16 INFO5 check_wapp_levels: WAPP power levels are between 0.764 and 1.115 (still bad) 2008-Apr-30 19:12:18 INFO5 check_wapp_levels: WAPP power levels are between 0.645 and 1.117 (still bad) 2008-Apr-30 19:12:20 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.915 and 1.115 2008-Apr-30 19:13:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.787 < 0.8)! 2008-Apr-30 19:13:47 LOG4 check_wapp_levels: WAPP-1 power levels: 0.917 0.787 1.100 1.030 2008-Apr-30 19:13:47 LOG4 check_wapp_levels: WAPP-2 power levels: 0.971 1.115 0.916 0.992 2008-Apr-30 19:13:47 LOG4 check_wapp_levels: WAPP-3 power levels: 1.076 1.110 0.993 1.120 2008-Apr-30 19:13:47 LOG4 check_wapp_levels: WAPP-4 power levels: 1.019 0.994 1.109 1.104 2008-Apr-30 19:13:49 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.915 and 1.119 2008-Apr-30 19:14:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.742 < 0.8)! 2008-Apr-30 19:14:01 LOG4 check_wapp_levels: WAPP-1 power levels: 0.921 0.742 1.100 1.027 2008-Apr-30 19:14:01 LOG4 check_wapp_levels: WAPP-2 power levels: 0.971 1.115 0.916 0.993 2008-Apr-30 19:14:01 LOG4 check_wapp_levels: WAPP-3 power levels: 1.080 1.111 0.991 1.121 2008-Apr-30 19:14:01 LOG4 check_wapp_levels: WAPP-4 power levels: 1.019 0.994 1.111 1.106 2008-Apr-30 19:14:03 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.916 and 1.120 2008-Apr-30 19:14:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.742 < 0.8)! 2008-Apr-30 19:14:59 LOG4 check_wapp_levels: WAPP-1 power levels: 0.919 0.742 1.101 1.026 2008-Apr-30 19:14:59 LOG4 check_wapp_levels: WAPP-2 power levels: 0.973 1.118 0.919 0.997 2008-Apr-30 19:14:59 LOG4 check_wapp_levels: WAPP-3 power levels: 1.084 1.118 0.990 1.121 2008-Apr-30 19:14:59 LOG4 check_wapp_levels: WAPP-4 power levels: 1.022 0.995 1.112 1.106 2008-Apr-30 19:15:01 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.919 and 1.121 2008-Apr-30 19:15:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.785 < 0.8)! 2008-Apr-30 19:15:24 LOG4 check_wapp_levels: WAPP-1 power levels: 0.922 0.785 1.101 1.031 2008-Apr-30 19:15:24 LOG4 check_wapp_levels: WAPP-2 power levels: 0.974 1.119 0.918 0.993 2008-Apr-30 19:15:24 LOG4 check_wapp_levels: WAPP-3 power levels: 1.112 1.144 0.997 1.124 2008-Apr-30 19:15:24 LOG4 check_wapp_levels: WAPP-4 power levels: 1.021 0.996 1.112 1.106 2008-Apr-30 19:15:26 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.885 and 1.138 2008-Apr-30 19:15:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.603 < 0.8)! 2008-Apr-30 19:15:30 LOG4 check_wapp_levels: WAPP-1 power levels: 0.925 0.603 1.104 1.032 2008-Apr-30 19:15:30 LOG4 check_wapp_levels: WAPP-2 power levels: 0.970 1.118 0.916 0.994 2008-Apr-30 19:15:30 LOG4 check_wapp_levels: WAPP-3 power levels: 1.092 1.122 0.999 1.127 2008-Apr-30 19:15:30 LOG4 check_wapp_levels: WAPP-4 power levels: 1.022 0.995 1.113 1.106 2008-Apr-30 19:15:32 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.891 and 1.127 2008-Apr-30 19:15:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.704 < 0.8)! 2008-Apr-30 19:15:42 LOG4 check_wapp_levels: WAPP-1 power levels: 0.928 0.704 1.106 1.037 2008-Apr-30 19:15:42 LOG4 check_wapp_levels: WAPP-2 power levels: 0.971 1.116 0.918 0.993 2008-Apr-30 19:15:42 LOG4 check_wapp_levels: WAPP-3 power levels: 1.087 1.119 1.002 1.127 2008-Apr-30 19:15:42 LOG4 check_wapp_levels: WAPP-4 power levels: 1.021 0.995 1.112 1.107 2008-Apr-30 19:15:44 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.919 and 1.129 2008-Apr-30 19:15:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.696 < 0.8)! 2008-Apr-30 19:15:54 LOG4 check_wapp_levels: WAPP-1 power levels: 0.923 0.696 1.103 1.036 2008-Apr-30 19:15:54 LOG4 check_wapp_levels: WAPP-2 power levels: 0.971 1.117 0.918 0.993 2008-Apr-30 19:15:54 LOG4 check_wapp_levels: WAPP-3 power levels: 1.081 1.113 0.998 1.127 2008-Apr-30 19:15:54 LOG4 check_wapp_levels: WAPP-4 power levels: 1.020 0.994 1.111 1.105 2008-Apr-30 19:15:56 INFO5 check_wapp_levels: WAPP power levels are between 0.687 and 1.125 (still bad) 2008-Apr-30 19:15:58 INFO5 check_wapp_levels: WAPP power levels are between 0.686 and 1.124 (still bad) 2008-Apr-30 19:16:00 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.818 and 1.123 2008-Apr-30 19:16:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.771 < 0.8)! 2008-Apr-30 19:16:10 LOG4 check_wapp_levels: WAPP-1 power levels: 0.924 0.771 1.102 1.035 2008-Apr-30 19:16:10 LOG4 check_wapp_levels: WAPP-2 power levels: 0.971 1.118 0.917 0.994 2008-Apr-30 19:16:10 LOG4 check_wapp_levels: WAPP-3 power levels: 1.082 1.116 0.996 1.121 2008-Apr-30 19:16:10 LOG4 check_wapp_levels: WAPP-4 power levels: 1.021 0.995 1.113 1.105 2008-Apr-30 19:16:12 INFO5 check_wapp_levels: WAPP power levels are between 0.716 and 1.120 (still bad) 2008-Apr-30 19:16:14 INFO5 check_wapp_levels: WAPP power levels are between 0.721 and 1.122 (still bad) 2008-Apr-30 19:16:16 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.917 and 1.121 2008-Apr-30 19:16:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.610 < 0.8)! 2008-Apr-30 19:16:22 LOG4 check_wapp_levels: WAPP-1 power levels: 0.921 0.610 1.103 1.034 2008-Apr-30 19:16:22 LOG4 check_wapp_levels: WAPP-2 power levels: 0.970 1.117 0.917 0.994 2008-Apr-30 19:16:22 LOG4 check_wapp_levels: WAPP-3 power levels: 1.078 1.113 0.992 1.119 2008-Apr-30 19:16:22 LOG4 check_wapp_levels: WAPP-4 power levels: 1.021 0.995 1.113 1.106 2008-Apr-30 19:16:24 INFO5 check_wapp_levels: WAPP power levels are between 0.570 and 1.119 (still bad) 2008-Apr-30 19:16:26 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.917 and 1.120 2008-Apr-30 19:16:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.759 < 0.8)! 2008-Apr-30 19:16:39 LOG4 check_wapp_levels: WAPP-1 power levels: 0.920 0.759 1.103 1.036 2008-Apr-30 19:16:39 LOG4 check_wapp_levels: WAPP-2 power levels: 0.973 1.118 0.918 0.993 2008-Apr-30 19:16:39 LOG4 check_wapp_levels: WAPP-3 power levels: 1.080 1.112 0.992 1.120 2008-Apr-30 19:16:39 LOG4 check_wapp_levels: WAPP-4 power levels: 1.020 0.995 1.112 1.106 2008-Apr-30 19:16:41 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.841 and 1.119 2008-Apr-30 19:16:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.781 < 0.8)! 2008-Apr-30 19:16:51 LOG4 check_wapp_levels: WAPP-1 power levels: 0.922 0.781 1.105 1.036 2008-Apr-30 19:16:51 LOG4 check_wapp_levels: WAPP-2 power levels: 0.972 1.117 0.918 0.994 2008-Apr-30 19:16:51 LOG4 check_wapp_levels: WAPP-3 power levels: 1.078 1.113 0.994 1.120 2008-Apr-30 19:16:51 LOG4 check_wapp_levels: WAPP-4 power levels: 1.020 0.996 1.111 1.107 2008-Apr-30 19:16:53 INFO5 check_wapp_levels: WAPP power levels are between 0.746 and 1.121 (still bad) 2008-Apr-30 19:16:55 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.807 and 1.119 2008-Apr-30 19:17:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.666 < 0.8)! 2008-Apr-30 19:17:01 LOG4 check_wapp_levels: WAPP-1 power levels: 0.919 0.666 1.105 1.036 2008-Apr-30 19:17:01 LOG4 check_wapp_levels: WAPP-2 power levels: 0.971 1.118 0.917 0.994 2008-Apr-30 19:17:01 LOG4 check_wapp_levels: WAPP-3 power levels: 1.078 1.110 0.994 1.120 2008-Apr-30 19:17:01 LOG4 check_wapp_levels: WAPP-4 power levels: 1.020 0.996 1.111 1.105 2008-Apr-30 19:17:03 INFO5 check_wapp_levels: WAPP power levels are between 0.665 and 1.120 (still bad) 2008-Apr-30 19:17:05 INFO5 check_wapp_levels: WAPP power levels are between 0.664 and 1.119 (still bad) 2008-Apr-30 19:17:07 INFO5 check_wapp_levels: WAPP power levels are between 0.763 and 1.119 (still bad) 2008-Apr-30 19:17:09 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.853 and 1.119 2008-Apr-30 19:17:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.778 < 0.8)! 2008-Apr-30 19:17:19 LOG4 check_wapp_levels: WAPP-1 power levels: 0.923 0.778 1.104 1.034 2008-Apr-30 19:17:19 LOG4 check_wapp_levels: WAPP-2 power levels: 0.973 1.117 0.918 0.994 2008-Apr-30 19:17:19 LOG4 check_wapp_levels: WAPP-3 power levels: 1.079 1.111 0.994 1.119 2008-Apr-30 19:17:19 LOG4 check_wapp_levels: WAPP-4 power levels: 1.020 0.996 1.112 1.106 2008-Apr-30 19:17:21 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.918 and 1.120 2008-Apr-30 19:17:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.568 < 0.8)! 2008-Apr-30 19:17:33 LOG4 check_wapp_levels: WAPP-1 power levels: 0.919 0.568 1.105 1.033 2008-Apr-30 19:17:33 LOG4 check_wapp_levels: WAPP-2 power levels: 0.973 1.118 0.916 0.994 2008-Apr-30 19:17:33 LOG4 check_wapp_levels: WAPP-3 power levels: 1.076 1.111 0.990 1.119 2008-Apr-30 19:17:33 LOG4 check_wapp_levels: WAPP-4 power levels: 1.020 0.998 1.113 1.109 2008-Apr-30 19:17:35 INFO5 check_wapp_levels: WAPP power levels are between 0.722 and 1.118 (still bad) 2008-Apr-30 19:17:37 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.917 and 1.118 2008-Apr-30 19:17:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.786 < 0.8)! 2008-Apr-30 19:17:45 LOG4 check_wapp_levels: WAPP-1 power levels: 0.920 0.786 1.109 1.034 2008-Apr-30 19:17:45 LOG4 check_wapp_levels: WAPP-2 power levels: 0.972 1.118 0.920 0.994 2008-Apr-30 19:17:45 LOG4 check_wapp_levels: WAPP-3 power levels: 1.077 1.112 0.993 1.122 2008-Apr-30 19:17:45 LOG4 check_wapp_levels: WAPP-4 power levels: 1.021 0.999 1.113 1.108 2008-Apr-30 19:17:47 INFO5 check_wapp_levels: WAPP power levels are between 0.783 and 1.122 (still bad) 2008-Apr-30 19:17:49 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.869 and 1.121 2008-Apr-30 19:18:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.620 < 0.8)! 2008-Apr-30 19:18:28 LOG4 check_wapp_levels: WAPP-1 power levels: 0.916 0.620 1.106 1.032 2008-Apr-30 19:18:28 LOG4 check_wapp_levels: WAPP-2 power levels: 0.973 1.117 0.921 0.995 2008-Apr-30 19:18:28 LOG4 check_wapp_levels: WAPP-3 power levels: 1.079 1.112 0.992 1.119 2008-Apr-30 19:18:28 LOG4 check_wapp_levels: WAPP-4 power levels: 1.023 0.999 1.113 1.108 2008-Apr-30 19:18:30 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.911 and 1.119 2008-Apr-30 19:18:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.772 < 0.8)! 2008-Apr-30 19:18:34 LOG4 check_wapp_levels: WAPP-1 power levels: 0.921 0.772 1.105 1.032 2008-Apr-30 19:18:34 LOG4 check_wapp_levels: WAPP-2 power levels: 0.970 1.115 0.920 0.994 2008-Apr-30 19:18:34 LOG4 check_wapp_levels: WAPP-3 power levels: 1.079 1.114 0.994 1.122 2008-Apr-30 19:18:34 LOG4 check_wapp_levels: WAPP-4 power levels: 1.023 0.999 1.115 1.109 2008-Apr-30 19:18:36 INFO5 check_wapp_levels: WAPP power levels are between 0.657 and 1.122 (still bad) 2008-Apr-30 19:18:38 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.866 and 1.121 2008-Apr-30 19:18:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.558 < 0.8)! 2008-Apr-30 19:18:46 LOG4 check_wapp_levels: WAPP-1 power levels: 0.919 0.558 1.105 1.033 2008-Apr-30 19:18:46 LOG4 check_wapp_levels: WAPP-2 power levels: 0.973 1.117 0.919 0.994 2008-Apr-30 19:18:46 LOG4 check_wapp_levels: WAPP-3 power levels: 1.079 1.114 0.994 1.122 2008-Apr-30 19:18:46 LOG4 check_wapp_levels: WAPP-4 power levels: 1.022 1.000 1.114 1.109 2008-Apr-30 19:18:48 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.884 and 1.122 2008-Apr-30 19:18:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.570 < 0.8)! 2008-Apr-30 19:18:52 LOG4 check_wapp_levels: WAPP-1 power levels: 0.916 0.570 1.106 1.032 2008-Apr-30 19:18:52 LOG4 check_wapp_levels: WAPP-2 power levels: 0.972 1.118 0.919 0.994 2008-Apr-30 19:18:52 LOG4 check_wapp_levels: WAPP-3 power levels: 1.080 1.113 0.995 1.121 2008-Apr-30 19:18:52 LOG4 check_wapp_levels: WAPP-4 power levels: 1.022 0.999 1.114 1.108 2008-Apr-30 19:18:54 INFO5 check_wapp_levels: WAPP power levels are between 0.571 and 1.121 (still bad) 2008-Apr-30 19:18:56 INFO5 check_wapp_levels: WAPP power levels are between 0.574 and 1.121 (still bad) 2008-Apr-30 19:18:58 INFO5 check_wapp_levels: WAPP power levels are between 0.578 and 1.120 (still bad) 2008-Apr-30 19:19:00 INFO5 check_wapp_levels: WAPP power levels are between 0.577 and 1.122 (still bad) 2008-Apr-30 19:19:02 INFO5 check_wapp_levels: WAPP power levels are between 0.580 and 1.122 (still bad) 2008-Apr-30 19:19:04 INFO5 check_wapp_levels: WAPP power levels are between 0.583 and 1.122 (still bad) 2008-Apr-30 19:19:06 INFO5 check_wapp_levels: WAPP power levels are between 0.582 and 1.123 (still bad) 2008-Apr-30 19:19:08 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.864 and 1.124 2008-Apr-30 19:19:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.715 < 0.8)! 2008-Apr-30 19:19:49 LOG4 check_wapp_levels: WAPP-1 power levels: 0.918 0.715 1.106 1.028 2008-Apr-30 19:19:49 LOG4 check_wapp_levels: WAPP-2 power levels: 0.980 1.127 0.919 0.994 2008-Apr-30 19:19:49 LOG4 check_wapp_levels: WAPP-3 power levels: 1.082 1.117 0.992 1.122 2008-Apr-30 19:19:49 LOG4 check_wapp_levels: WAPP-4 power levels: 1.023 0.998 1.115 1.108 2008-Apr-30 19:19:51 INFO5 check_wapp_levels: WAPP power levels are between 0.711 and 1.122 (still bad) 2008-Apr-30 19:19:53 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.889 and 1.121 2008-Apr-30 19:20:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.638 < 0.8)! 2008-Apr-30 19:20:03 LOG4 check_wapp_levels: WAPP-1 power levels: 0.922 0.638 1.106 1.029 2008-Apr-30 19:20:03 LOG4 check_wapp_levels: WAPP-2 power levels: 0.972 1.117 0.920 0.994 2008-Apr-30 19:20:03 LOG4 check_wapp_levels: WAPP-3 power levels: 1.084 1.117 0.992 1.121 2008-Apr-30 19:20:03 LOG4 check_wapp_levels: WAPP-4 power levels: 1.023 0.997 1.114 1.107 2008-Apr-30 19:20:05 INFO5 check_wapp_levels: WAPP power levels are between 0.625 and 1.119 (still bad) 2008-Apr-30 19:20:07 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.803 and 1.120 2008-Apr-30 19:20:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.769 < 0.8)! 2008-Apr-30 19:20:09 LOG4 check_wapp_levels: WAPP-1 power levels: 0.924 0.769 1.107 1.030 2008-Apr-30 19:20:09 LOG4 check_wapp_levels: WAPP-2 power levels: 0.972 1.119 0.919 0.994 2008-Apr-30 19:20:09 LOG4 check_wapp_levels: WAPP-3 power levels: 1.082 1.116 0.993 1.120 2008-Apr-30 19:20:09 LOG4 check_wapp_levels: WAPP-4 power levels: 1.021 1.000 1.113 1.109 2008-Apr-30 19:20:11 INFO5 check_wapp_levels: WAPP power levels are between 0.755 and 1.121 (still bad) 2008-Apr-30 19:20:13 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.816 and 1.122 2008-Apr-30 19:20:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.743 < 0.8)! 2008-Apr-30 19:20:21 LOG4 check_wapp_levels: WAPP-1 power levels: 0.921 0.743 1.106 1.031 2008-Apr-30 19:20:21 LOG4 check_wapp_levels: WAPP-2 power levels: 0.973 1.116 0.920 0.993 2008-Apr-30 19:20:21 LOG4 check_wapp_levels: WAPP-3 power levels: 1.083 1.117 0.995 1.121 2008-Apr-30 19:20:21 LOG4 check_wapp_levels: WAPP-4 power levels: 1.027 1.002 1.119 1.114 2008-Apr-30 19:20:23 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.920 and 1.122 2008-Apr-30 19:20:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.703 < 0.8)! 2008-Apr-30 19:20:41 LOG4 check_wapp_levels: WAPP-1 power levels: 0.916 0.703 1.107 1.031 2008-Apr-30 19:20:41 LOG4 check_wapp_levels: WAPP-2 power levels: 0.972 1.119 0.921 0.995 2008-Apr-30 19:20:41 LOG4 check_wapp_levels: WAPP-3 power levels: 1.082 1.117 0.996 1.124 2008-Apr-30 19:20:41 LOG4 check_wapp_levels: WAPP-4 power levels: 1.024 1.000 1.115 1.110 2008-Apr-30 19:20:43 INFO5 check_wapp_levels: WAPP power levels are between 0.760 and 1.124 (still bad) 2008-Apr-30 19:20:45 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.840 and 1.126 2008-Apr-30 19:20:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.722 < 0.8)! 2008-Apr-30 19:20:52 LOG4 check_wapp_levels: WAPP-1 power levels: 0.921 0.722 1.106 1.032 2008-Apr-30 19:20:52 LOG4 check_wapp_levels: WAPP-2 power levels: 0.974 1.118 0.921 0.994 2008-Apr-30 19:20:52 LOG4 check_wapp_levels: WAPP-3 power levels: 1.085 1.120 0.996 1.123 2008-Apr-30 19:20:52 LOG4 check_wapp_levels: WAPP-4 power levels: 1.024 0.999 1.116 1.109 2008-Apr-30 19:20:54 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.920 and 1.123 2008-Apr-30 19:21:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.681 < 0.8)! 2008-Apr-30 19:21:00 LOG4 check_wapp_levels: WAPP-1 power levels: 0.920 0.681 1.106 1.032 2008-Apr-30 19:21:00 LOG4 check_wapp_levels: WAPP-2 power levels: 0.974 1.120 0.920 0.995 2008-Apr-30 19:21:00 LOG4 check_wapp_levels: WAPP-3 power levels: 1.084 1.119 0.996 1.122 2008-Apr-30 19:21:00 LOG4 check_wapp_levels: WAPP-4 power levels: 1.023 0.999 1.116 1.109 2008-Apr-30 19:21:02 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.803 and 1.122 2008-Apr-30 19:21:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.784 < 0.8)! 2008-Apr-30 19:21:04 LOG4 check_wapp_levels: WAPP-1 power levels: 0.915 0.784 1.106 1.033 2008-Apr-30 19:21:04 LOG4 check_wapp_levels: WAPP-2 power levels: 0.973 1.119 0.920 0.995 2008-Apr-30 19:21:04 LOG4 check_wapp_levels: WAPP-3 power levels: 1.083 1.119 0.995 1.123 2008-Apr-30 19:21:04 LOG4 check_wapp_levels: WAPP-4 power levels: 1.024 0.999 1.116 1.107 2008-Apr-30 19:21:06 INFO5 check_wapp_levels: WAPP power levels are between 0.670 and 1.122 (still bad) 2008-Apr-30 19:21:08 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.896 and 1.124 2008-Apr-30 19:21:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.639 < 0.8)! 2008-Apr-30 19:21:14 LOG4 check_wapp_levels: WAPP-1 power levels: 0.917 0.639 1.105 1.033 2008-Apr-30 19:21:14 LOG4 check_wapp_levels: WAPP-2 power levels: 0.976 1.121 0.922 0.995 2008-Apr-30 19:21:14 LOG4 check_wapp_levels: WAPP-3 power levels: 1.085 1.120 0.997 1.126 2008-Apr-30 19:21:14 LOG4 check_wapp_levels: WAPP-4 power levels: 1.025 1.000 1.117 1.110 2008-Apr-30 19:21:16 INFO5 check_wapp_levels: WAPP power levels are between 0.617 and 1.124 (still bad) 2008-Apr-30 19:21:18 INFO5 check_wapp_levels: WAPP power levels are between 0.616 and 1.123 (still bad) 2008-Apr-30 19:21:20 INFO5 check_wapp_levels: WAPP power levels are between 0.617 and 1.125 (still bad) 2008-Apr-30 19:21:22 INFO5 check_wapp_levels: WAPP power levels are between 0.683 and 1.125 (still bad) 2008-Apr-30 19:21:24 INFO5 check_wapp_levels: WAPP power levels are between 0.687 and 1.123 (still bad) 2008-Apr-30 19:21:26 INFO5 check_wapp_levels: WAPP power levels are between 0.682 and 1.123 (still bad) 2008-Apr-30 19:21:28 INFO5 check_wapp_levels: WAPP power levels are between 0.680 and 1.123 (still bad) 2008-Apr-30 19:21:30 INFO5 check_wapp_levels: WAPP power levels are between 0.680 and 1.124 (still bad) 2008-Apr-30 19:21:32 INFO5 check_wapp_levels: WAPP power levels are between 0.678 and 1.123 (still bad) 2008-Apr-30 19:21:34 INFO5 check_wapp_levels: WAPP power levels are between 0.768 and 1.124 (still bad) 2008-Apr-30 19:21:36 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.920 and 1.125 2008-Apr-30 19:21:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.783 < 0.8)! 2008-Apr-30 19:21:54 LOG4 check_wapp_levels: WAPP-1 power levels: 0.921 0.783 1.105 1.030 2008-Apr-30 19:21:54 LOG4 check_wapp_levels: WAPP-2 power levels: 0.972 1.120 0.921 0.995 2008-Apr-30 19:21:54 LOG4 check_wapp_levels: WAPP-3 power levels: 1.085 1.118 0.995 1.122 2008-Apr-30 19:21:54 LOG4 check_wapp_levels: WAPP-4 power levels: 1.025 0.999 1.116 1.109 2008-Apr-30 19:21:56 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.921 and 1.121 2008-Apr-30 19:21:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.656 < 0.8)! 2008-Apr-30 19:21:58 LOG4 check_wapp_levels: WAPP-1 power levels: 0.920 0.656 1.107 1.032 2008-Apr-30 19:21:58 LOG4 check_wapp_levels: WAPP-2 power levels: 0.976 1.119 0.921 0.995 2008-Apr-30 19:21:58 LOG4 check_wapp_levels: WAPP-3 power levels: 1.083 1.118 0.996 1.122 2008-Apr-30 19:21:58 LOG4 check_wapp_levels: WAPP-4 power levels: 1.026 0.998 1.117 1.108 2008-Apr-30 19:22:00 INFO5 check_wapp_levels: WAPP power levels are between 0.734 and 1.120 (still bad) 2008-Apr-30 19:22:02 INFO5 check_wapp_levels: WAPP power levels are between 0.723 and 1.121 (still bad) 2008-Apr-30 19:22:04 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.823 and 1.122 2008-Apr-30 19:22:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.732 < 0.8)! 2008-Apr-30 19:22:06 LOG4 check_wapp_levels: WAPP-1 power levels: 0.923 0.732 1.108 1.032 2008-Apr-30 19:22:06 LOG4 check_wapp_levels: WAPP-2 power levels: 0.977 1.119 0.921 0.995 2008-Apr-30 19:22:06 LOG4 check_wapp_levels: WAPP-3 power levels: 1.086 1.118 0.998 1.122 2008-Apr-30 19:22:06 LOG4 check_wapp_levels: WAPP-4 power levels: 1.025 0.998 1.116 1.109 2008-Apr-30 19:22:08 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.922 and 1.123 2008-Apr-30 19:22:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.603 < 0.8)! 2008-Apr-30 19:22:17 LOG4 check_wapp_levels: WAPP-1 power levels: 0.916 0.603 1.107 1.034 2008-Apr-30 19:22:17 LOG4 check_wapp_levels: WAPP-2 power levels: 0.976 1.118 0.924 0.997 2008-Apr-30 19:22:17 LOG4 check_wapp_levels: WAPP-3 power levels: 1.083 1.117 0.996 1.120 2008-Apr-30 19:22:17 LOG4 check_wapp_levels: WAPP-4 power levels: 1.025 1.000 1.117 1.111 2008-Apr-30 19:22:19 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.920 and 1.120 2008-Apr-30 19:22:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.683 < 0.8)! 2008-Apr-30 19:22:27 LOG4 check_wapp_levels: WAPP-1 power levels: 0.920 0.683 1.108 1.033 2008-Apr-30 19:22:27 LOG4 check_wapp_levels: WAPP-2 power levels: 0.976 1.119 0.923 0.996 2008-Apr-30 19:22:27 LOG4 check_wapp_levels: WAPP-3 power levels: 1.081 1.117 0.997 1.121 2008-Apr-30 19:22:27 LOG4 check_wapp_levels: WAPP-4 power levels: 1.026 1.001 1.116 1.111 2008-Apr-30 19:22:29 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.922 and 1.121 2008-Apr-30 19:22:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.583 < 0.8)! 2008-Apr-30 19:22:33 LOG4 check_wapp_levels: WAPP-1 power levels: 0.920 0.583 1.106 1.033 2008-Apr-30 19:22:33 LOG4 check_wapp_levels: WAPP-2 power levels: 0.975 1.119 0.924 0.997 2008-Apr-30 19:22:33 LOG4 check_wapp_levels: WAPP-3 power levels: 1.081 1.117 0.995 1.121 2008-Apr-30 19:22:33 LOG4 check_wapp_levels: WAPP-4 power levels: 1.025 0.999 1.116 1.109 2008-Apr-30 19:22:35 INFO5 check_wapp_levels: WAPP power levels are between 0.791 and 1.121 (still bad) 2008-Apr-30 19:22:37 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.922 and 1.120 2008-Apr-30 19:23:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.582 < 0.8)! 2008-Apr-30 19:23:13 LOG4 check_wapp_levels: WAPP-1 power levels: 0.919 0.582 1.107 1.033 2008-Apr-30 19:23:13 LOG4 check_wapp_levels: WAPP-2 power levels: 0.973 1.116 0.921 0.994 2008-Apr-30 19:23:13 LOG4 check_wapp_levels: WAPP-3 power levels: 1.089 1.125 0.998 1.121 2008-Apr-30 19:23:13 LOG4 check_wapp_levels: WAPP-4 power levels: 1.025 0.999 1.116 1.111 2008-Apr-30 19:23:15 INFO5 check_wapp_levels: WAPP power levels are between 0.769 and 1.127 (still bad) 2008-Apr-30 19:23:17 INFO5 check_wapp_levels: WAPP power levels are between 0.762 and 1.128 (still bad) 2008-Apr-30 19:23:19 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.892 and 1.126 2008-Apr-30 19:23:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.745 < 0.8)! 2008-Apr-30 19:23:27 LOG4 check_wapp_levels: WAPP-1 power levels: 0.914 0.745 1.108 1.033 2008-Apr-30 19:23:27 LOG4 check_wapp_levels: WAPP-2 power levels: 0.974 1.118 0.920 0.993 2008-Apr-30 19:23:27 LOG4 check_wapp_levels: WAPP-3 power levels: 1.086 1.123 0.996 1.122 2008-Apr-30 19:23:27 LOG4 check_wapp_levels: WAPP-4 power levels: 1.023 0.999 1.114 1.109 2008-Apr-30 19:23:29 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.828 and 1.121 2008-Apr-30 19:23:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.762 < 0.8)! 2008-Apr-30 19:23:31 LOG4 check_wapp_levels: WAPP-1 power levels: 0.932 0.762 1.111 1.037 2008-Apr-30 19:23:31 LOG4 check_wapp_levels: WAPP-2 power levels: 0.978 1.118 0.921 0.994 2008-Apr-30 19:23:31 LOG4 check_wapp_levels: WAPP-3 power levels: 1.087 1.119 1.001 1.122 2008-Apr-30 19:23:31 LOG4 check_wapp_levels: WAPP-4 power levels: 1.023 0.998 1.114 1.110 2008-Apr-30 19:23:33 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.867 and 1.121 2008-Apr-30 19:23:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.602 < 0.8)! 2008-Apr-30 19:23:35 LOG4 check_wapp_levels: WAPP-1 power levels: 0.944 0.602 1.114 1.037 2008-Apr-30 19:23:35 LOG4 check_wapp_levels: WAPP-2 power levels: 0.975 1.118 0.919 0.994 2008-Apr-30 19:23:35 LOG4 check_wapp_levels: WAPP-3 power levels: 1.084 1.115 1.000 1.123 2008-Apr-30 19:23:35 LOG4 check_wapp_levels: WAPP-4 power levels: 1.022 0.998 1.113 1.109 2008-Apr-30 19:23:37 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.802 and 1.122 2008-Apr-30 19:23:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.744 < 0.8)! 2008-Apr-30 19:23:46 LOG4 check_wapp_levels: WAPP-1 power levels: 0.953 0.744 1.123 1.040 2008-Apr-30 19:23:46 LOG4 check_wapp_levels: WAPP-2 power levels: 0.976 1.118 0.920 0.994 2008-Apr-30 19:23:46 LOG4 check_wapp_levels: WAPP-3 power levels: 1.083 1.114 1.003 1.122 2008-Apr-30 19:23:46 LOG4 check_wapp_levels: WAPP-4 power levels: 1.024 0.999 1.114 1.110 2008-Apr-30 19:23:48 INFO5 check_wapp_levels: WAPP power levels are between 0.794 and 1.125 (still bad) 2008-Apr-30 19:23:50 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.893 and 1.125 2008-Apr-30 19:23:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.698 < 0.8)! 2008-Apr-30 19:23:54 LOG4 check_wapp_levels: WAPP-1 power levels: 0.955 0.698 1.127 1.040 2008-Apr-30 19:23:54 LOG4 check_wapp_levels: WAPP-2 power levels: 0.977 1.118 0.920 0.993 2008-Apr-30 19:23:54 LOG4 check_wapp_levels: WAPP-3 power levels: 1.081 1.113 1.004 1.120 2008-Apr-30 19:23:54 LOG4 check_wapp_levels: WAPP-4 power levels: 1.023 1.000 1.112 1.110 2008-Apr-30 19:23:56 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.920 and 1.125 2008-Apr-30 19:23:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.585 < 0.8)! 2008-Apr-30 19:23:58 LOG4 check_wapp_levels: WAPP-1 power levels: 0.948 0.585 1.125 1.041 2008-Apr-30 19:23:58 LOG4 check_wapp_levels: WAPP-2 power levels: 0.975 1.118 0.920 0.992 2008-Apr-30 19:23:58 LOG4 check_wapp_levels: WAPP-3 power levels: 1.081 1.116 1.002 1.121 2008-Apr-30 19:23:58 LOG4 check_wapp_levels: WAPP-4 power levels: 1.023 0.998 1.112 1.109 2008-Apr-30 19:24:00 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.816 and 1.124 2008-Apr-30 19:24:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.762 < 0.8)! 2008-Apr-30 19:24:02 LOG4 check_wapp_levels: WAPP-1 power levels: 0.946 0.762 1.124 1.040 2008-Apr-30 19:24:02 LOG4 check_wapp_levels: WAPP-2 power levels: 0.977 1.117 0.920 0.993 2008-Apr-30 19:24:02 LOG4 check_wapp_levels: WAPP-3 power levels: 1.083 1.116 1.001 1.120 2008-Apr-30 19:24:02 LOG4 check_wapp_levels: WAPP-4 power levels: 1.022 0.998 1.113 1.109 2008-Apr-30 19:24:04 INFO5 check_wapp_levels: WAPP power levels are between 0.749 and 1.124 (still bad) 2008-Apr-30 19:24:06 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.921 and 1.125 2008-Apr-30 19:24:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.730 < 0.8)! 2008-Apr-30 19:24:08 LOG4 check_wapp_levels: WAPP-1 power levels: 0.942 0.730 1.125 1.039 2008-Apr-30 19:24:08 LOG4 check_wapp_levels: WAPP-2 power levels: 0.977 1.118 0.920 0.993 2008-Apr-30 19:24:08 LOG4 check_wapp_levels: WAPP-3 power levels: 1.082 1.116 1.000 1.120 2008-Apr-30 19:24:08 LOG4 check_wapp_levels: WAPP-4 power levels: 1.023 1.000 1.113 1.110 2008-Apr-30 19:24:10 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.864 and 1.122 2008-Apr-30 19:24:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.758 < 0.8)! 2008-Apr-30 19:24:12 LOG4 check_wapp_levels: WAPP-1 power levels: 0.938 0.758 1.123 1.040 2008-Apr-30 19:24:12 LOG4 check_wapp_levels: WAPP-2 power levels: 0.978 1.118 0.920 0.993 2008-Apr-30 19:24:12 LOG4 check_wapp_levels: WAPP-3 power levels: 1.082 1.116 1.000 1.122 2008-Apr-30 19:24:12 LOG4 check_wapp_levels: WAPP-4 power levels: 1.022 1.001 1.112 1.111 2008-Apr-30 19:24:14 INFO5 check_wapp_levels: WAPP power levels are between 0.538 and 1.121 (still bad) 2008-Apr-30 19:24:16 INFO5 check_wapp_levels: WAPP power levels are between 0.591 and 1.122 (still bad) 2008-Apr-30 19:24:18 INFO5 check_wapp_levels: WAPP power levels are between 0.598 and 1.122 (still bad) 2008-Apr-30 19:24:20 INFO5 check_wapp_levels: WAPP power levels are between 0.551 and 1.120 (still bad) 2008-Apr-30 19:24:22 INFO5 check_wapp_levels: WAPP power levels are between 0.554 and 1.120 (still bad) 2008-Apr-30 19:24:24 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.921 and 1.121 2008-Apr-30 19:24:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.746 < 0.8)! 2008-Apr-30 19:24:30 LOG4 check_wapp_levels: WAPP-1 power levels: 0.932 0.746 1.121 1.039 2008-Apr-30 19:24:30 LOG4 check_wapp_levels: WAPP-2 power levels: 0.975 1.119 0.921 0.994 2008-Apr-30 19:24:30 LOG4 check_wapp_levels: WAPP-3 power levels: 1.082 1.117 0.998 1.121 2008-Apr-30 19:24:30 LOG4 check_wapp_levels: WAPP-4 power levels: 1.023 1.001 1.113 1.112 2008-Apr-30 19:24:32 INFO5 check_wapp_levels: WAPP power levels are between 0.598 and 1.121 (still bad) 2008-Apr-30 19:24:34 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.915 and 1.122 2008-Apr-30 19:24:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.689 < 0.8)! 2008-Apr-30 19:24:42 LOG4 check_wapp_levels: WAPP-1 power levels: 0.930 0.689 1.117 1.037 2008-Apr-30 19:24:42 LOG4 check_wapp_levels: WAPP-2 power levels: 0.977 1.116 0.921 0.995 2008-Apr-30 19:24:42 LOG4 check_wapp_levels: WAPP-3 power levels: 1.081 1.119 0.999 1.123 2008-Apr-30 19:24:42 LOG4 check_wapp_levels: WAPP-4 power levels: 1.024 1.000 1.116 1.112 2008-Apr-30 19:24:44 INFO5 check_wapp_levels: WAPP power levels are between 0.726 and 1.122 (still bad) 2008-Apr-30 19:24:46 INFO5 check_wapp_levels: WAPP power levels are between 0.659 and 1.122 (still bad) 2008-Apr-30 19:24:48 INFO5 check_wapp_levels: WAPP power levels are between 0.613 and 1.123 (still bad) 2008-Apr-30 19:24:50 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.922 and 1.124 2008-Apr-30 19:25:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.743 < 0.8)! 2008-Apr-30 19:25:00 LOG4 check_wapp_levels: WAPP-1 power levels: 0.928 0.743 1.118 1.038 2008-Apr-30 19:25:00 LOG4 check_wapp_levels: WAPP-2 power levels: 0.976 1.118 0.922 0.995 2008-Apr-30 19:25:00 LOG4 check_wapp_levels: WAPP-3 power levels: 1.082 1.120 0.994 1.124 2008-Apr-30 19:25:00 LOG4 check_wapp_levels: WAPP-4 power levels: 1.022 1.001 1.113 1.110 2008-Apr-30 19:25:02 INFO5 check_wapp_levels: WAPP power levels are between 0.744 and 1.123 (still bad) 2008-Apr-30 19:25:04 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.922 and 1.122 2008-Apr-30 19:25:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.771 < 0.8)! 2008-Apr-30 19:25:13 LOG4 check_wapp_levels: WAPP-1 power levels: 0.929 0.771 1.118 1.040 2008-Apr-30 19:25:13 LOG4 check_wapp_levels: WAPP-2 power levels: 0.978 1.117 0.922 0.995 2008-Apr-30 19:25:13 LOG4 check_wapp_levels: WAPP-3 power levels: 1.082 1.120 0.997 1.122 2008-Apr-30 19:25:13 LOG4 check_wapp_levels: WAPP-4 power levels: 1.022 1.000 1.112 1.110 2008-Apr-30 19:25:15 INFO5 check_wapp_levels: WAPP power levels are between 0.558 and 1.123 (still bad) 2008-Apr-30 19:25:17 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.923 and 1.123 2008-Apr-30 19:25:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.751 < 0.8)! 2008-Apr-30 19:25:19 LOG4 check_wapp_levels: WAPP-1 power levels: 0.929 0.751 1.118 1.040 2008-Apr-30 19:25:19 LOG4 check_wapp_levels: WAPP-2 power levels: 0.976 1.119 0.925 0.997 2008-Apr-30 19:25:19 LOG4 check_wapp_levels: WAPP-3 power levels: 1.083 1.120 0.994 1.124 2008-Apr-30 19:25:19 LOG4 check_wapp_levels: WAPP-4 power levels: 1.023 1.000 1.113 1.110 2008-Apr-30 19:25:21 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.881 and 1.125 2008-Apr-30 19:25:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.734 < 0.8)! 2008-Apr-30 19:25:29 LOG4 check_wapp_levels: WAPP-1 power levels: 0.924 0.734 1.117 1.039 2008-Apr-30 19:25:29 LOG4 check_wapp_levels: WAPP-2 power levels: 0.975 1.119 0.925 0.999 2008-Apr-30 19:25:29 LOG4 check_wapp_levels: WAPP-3 power levels: 1.084 1.121 0.995 1.124 2008-Apr-30 19:25:29 LOG4 check_wapp_levels: WAPP-4 power levels: 1.024 0.999 1.114 1.108 2008-Apr-30 19:25:31 INFO5 check_wapp_levels: WAPP power levels are between 0.740 and 1.124 (still bad) 2008-Apr-30 19:25:33 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.926 and 1.124 2008-Apr-30 19:25:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.702 < 0.8)! 2008-Apr-30 19:25:41 LOG4 check_wapp_levels: WAPP-1 power levels: 0.925 0.702 1.115 1.038 2008-Apr-30 19:25:41 LOG4 check_wapp_levels: WAPP-2 power levels: 0.977 1.117 0.924 0.995 2008-Apr-30 19:25:41 LOG4 check_wapp_levels: WAPP-3 power levels: 1.086 1.125 0.998 1.124 2008-Apr-30 19:25:41 LOG4 check_wapp_levels: WAPP-4 power levels: 1.026 1.000 1.115 1.112 2008-Apr-30 19:25:43 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.922 and 1.127 2008-Apr-30 19:25:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.783 < 0.8)! 2008-Apr-30 19:25:47 LOG4 check_wapp_levels: WAPP-1 power levels: 0.926 0.783 1.114 1.038 2008-Apr-30 19:25:47 LOG4 check_wapp_levels: WAPP-2 power levels: 0.974 1.118 0.922 0.994 2008-Apr-30 19:25:47 LOG4 check_wapp_levels: WAPP-3 power levels: 1.093 1.132 0.995 1.124 2008-Apr-30 19:25:47 LOG4 check_wapp_levels: WAPP-4 power levels: 1.024 1.001 1.115 1.112 2008-Apr-30 19:25:49 INFO5 check_wapp_levels: WAPP power levels are between 0.769 and 1.131 (still bad) 2008-Apr-30 19:25:51 INFO5 check_wapp_levels: WAPP power levels are between 0.766 and 1.131 (still bad) 2008-Apr-30 19:25:53 INFO5 check_wapp_levels: WAPP power levels are between 0.761 and 1.131 (still bad) 2008-Apr-30 19:25:55 INFO5 check_wapp_levels: WAPP power levels are between 0.760 and 1.129 (still bad) 2008-Apr-30 19:25:57 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.877 and 1.126 2008-Apr-30 19:25:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.794 < 0.8)! 2008-Apr-30 19:25:59 LOG4 check_wapp_levels: WAPP-1 power levels: 0.923 0.794 1.114 1.036 2008-Apr-30 19:25:59 LOG4 check_wapp_levels: WAPP-2 power levels: 0.978 1.120 0.924 0.995 2008-Apr-30 19:25:59 LOG4 check_wapp_levels: WAPP-3 power levels: 1.087 1.123 0.997 1.124 2008-Apr-30 19:25:59 LOG4 check_wapp_levels: WAPP-4 power levels: 1.025 1.001 1.116 1.111 2008-Apr-30 19:26:01 INFO5 check_wapp_levels: WAPP power levels are between 0.799 and 1.124 (still bad) 2008-Apr-30 19:26:03 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.923 and 1.124 2008-Apr-30 19:26:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.688 < 0.8)! 2008-Apr-30 19:26:05 LOG4 check_wapp_levels: WAPP-1 power levels: 0.922 0.688 1.114 1.036 2008-Apr-30 19:26:05 LOG4 check_wapp_levels: WAPP-2 power levels: 0.978 1.121 0.922 0.994 2008-Apr-30 19:26:05 LOG4 check_wapp_levels: WAPP-3 power levels: 1.083 1.123 0.995 1.124 2008-Apr-30 19:26:05 LOG4 check_wapp_levels: WAPP-4 power levels: 1.025 1.000 1.116 1.110 2008-Apr-30 19:26:07 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.821 and 1.124 2008-Apr-30 19:26:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.727 < 0.8)! 2008-Apr-30 19:26:09 LOG4 check_wapp_levels: WAPP-1 power levels: 0.925 0.727 1.115 1.036 2008-Apr-30 19:26:09 LOG4 check_wapp_levels: WAPP-2 power levels: 0.979 1.119 0.923 0.995 2008-Apr-30 19:26:09 LOG4 check_wapp_levels: WAPP-3 power levels: 1.083 1.120 0.998 1.125 2008-Apr-30 19:26:09 LOG4 check_wapp_levels: WAPP-4 power levels: 1.024 1.001 1.115 1.112 2008-Apr-30 19:26:11 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.877 and 1.125 2008-Apr-30 19:26:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.789 < 0.8)! 2008-Apr-30 19:26:23 LOG4 check_wapp_levels: WAPP-1 power levels: 0.926 0.789 1.117 1.038 2008-Apr-30 19:26:23 LOG4 check_wapp_levels: WAPP-2 power levels: 0.977 1.120 0.924 0.996 2008-Apr-30 19:26:23 LOG4 check_wapp_levels: WAPP-3 power levels: 1.084 1.121 0.998 1.125 2008-Apr-30 19:26:23 LOG4 check_wapp_levels: WAPP-4 power levels: 1.025 1.000 1.115 1.110 2008-Apr-30 19:26:25 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.817 and 1.125 2008-Apr-30 19:26:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.625 < 0.8)! 2008-Apr-30 19:26:33 LOG4 check_wapp_levels: WAPP-1 power levels: 0.926 0.625 1.129 1.049 2008-Apr-30 19:26:33 LOG4 check_wapp_levels: WAPP-2 power levels: 0.977 1.119 0.924 0.996 2008-Apr-30 19:26:33 LOG4 check_wapp_levels: WAPP-3 power levels: 1.083 1.121 0.997 1.124 2008-Apr-30 19:26:33 LOG4 check_wapp_levels: WAPP-4 power levels: 1.024 0.999 1.115 1.109 2008-Apr-30 19:26:35 INFO5 check_wapp_levels: WAPP power levels are between 0.672 and 1.131 (still bad) 2008-Apr-30 19:26:38 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.924 and 1.130 2008-Apr-30 19:26:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.795 < 0.8)! 2008-Apr-30 19:26:40 LOG4 check_wapp_levels: WAPP-1 power levels: 0.925 0.795 1.130 1.050 2008-Apr-30 19:26:40 LOG4 check_wapp_levels: WAPP-2 power levels: 0.977 1.122 0.927 0.999 2008-Apr-30 19:26:40 LOG4 check_wapp_levels: WAPP-3 power levels: 1.083 1.121 0.997 1.123 2008-Apr-30 19:26:40 LOG4 check_wapp_levels: WAPP-4 power levels: 1.024 0.999 1.116 1.108 2008-Apr-30 19:26:42 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.925 and 1.127 2008-Apr-30 19:26:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.774 < 0.8)! 2008-Apr-30 19:26:46 LOG4 check_wapp_levels: WAPP-1 power levels: 0.922 0.774 1.124 1.046 2008-Apr-30 19:26:46 LOG4 check_wapp_levels: WAPP-2 power levels: 0.979 1.122 0.926 1.000 2008-Apr-30 19:26:46 LOG4 check_wapp_levels: WAPP-3 power levels: 1.085 1.120 0.998 1.124 2008-Apr-30 19:26:46 LOG4 check_wapp_levels: WAPP-4 power levels: 1.024 1.001 1.115 1.110 2008-Apr-30 19:26:48 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.908 and 1.126 2008-Apr-30 19:26:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.630 < 0.8)! 2008-Apr-30 19:26:56 LOG4 check_wapp_levels: WAPP-1 power levels: 0.925 0.630 1.121 1.043 2008-Apr-30 19:26:56 LOG4 check_wapp_levels: WAPP-2 power levels: 0.976 1.119 0.931 1.004 2008-Apr-30 19:26:56 LOG4 check_wapp_levels: WAPP-3 power levels: 1.082 1.121 0.998 1.125 2008-Apr-30 19:26:56 LOG4 check_wapp_levels: WAPP-4 power levels: 1.025 1.000 1.116 1.109 2008-Apr-30 19:26:58 INFO5 check_wapp_levels: WAPP power levels are between 0.699 and 1.124 (still bad) 2008-Apr-30 19:27:00 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.927 and 1.124 2008-Apr-30 19:27:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.792 < 0.8)! 2008-Apr-30 19:27:06 LOG4 check_wapp_levels: WAPP-1 power levels: 0.926 0.792 1.118 1.039 2008-Apr-30 19:27:06 LOG4 check_wapp_levels: WAPP-2 power levels: 0.977 1.119 0.927 1.000 2008-Apr-30 19:27:06 LOG4 check_wapp_levels: WAPP-3 power levels: 1.083 1.122 0.997 1.124 2008-Apr-30 19:27:06 LOG4 check_wapp_levels: WAPP-4 power levels: 1.027 1.004 1.118 1.114 2008-Apr-30 19:27:08 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.924 and 1.123 2008-Apr-30 19:27:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-30 19:27:29 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-30 19:27:29 LOG5 end_task: Level: (4) ID = <10166> Status = 0 0 0 0 ok 2008-Apr-30 19:27:29 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-30 19:27:29 LOG5 end_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2008-Apr-30 19:27:29 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-30 19:27:29 LOG5 finish_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2008-Apr-30 19:27:29 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-30 19:27:29 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-30 19:27:29 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-30 19:27:29 LOG5 end_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2008-Apr-30 19:27:29 COMMAND run_command_line: EXECUTING command 15: 'FIXEDDRIFT az=210.37 alfaangle=-8.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p1_018 ra=95300.00 dec=232730.00' 2008-Apr-30 19:27:29 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-30 19:27:30 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-30 19:27:30 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 210.37 -8.6 hcorcal 5 tracking no first 1 AGES3193_p1_018 95300.00 232730.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-30 19:27:30 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-30 19:27:30 LOG5 begin_task: Level: (2) ID = <10167> Status = 0 0 0 0 ok 2008-Apr-30 19:27:30 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES3193_p1_016' 2008-Apr-30 19:27:30 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-30 19:27:30 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p1_018} 2008-Apr-30 19:27:30 INFO3 fixed_driftmap: Sending telescope to Az = 210.37 and ZA = 5.91 2008-Apr-30 19:27:30 LOG3 track_source: Calling 'track_source AGES3193_p1_018 210.37 5.9052268118 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-30 19:27:30 START begin_task: Starting task 'sending tracking commands' 2008-Apr-30 19:27:30 LOG5 begin_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2008-Apr-30 19:27:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p1_018} INFO {Slewing to source 'AGES3193_p1_018' ...} 2008-Apr-30 19:27:30 INFO1 track_source: Starting to track AGES3193_p1_018 2008-Apr-30 19:27:30 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p1_018" 2008-Apr-30 19:27:30 LOG3 vw_send: To DATATAKING: set ra 210.37 2008-Apr-30 19:27:30 LOG3 vw_send: To DATATAKING: set dec 5.9052268118 2008-Apr-30 19:27:30 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-30 19:27:30 LOG3 vw_send: To DATATAKING: pnt tr 210.37 5.9052268118 -CF 2008-Apr-30 19:27:30 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-30 19:27:30 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-30 19:27:30 LOG5 finish_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2008-Apr-30 19:27:30 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-30 19:27:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 19:27:30 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-30 19:27:30 LOG5 end_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2008-Apr-30 19:27:30 START begin_task: Starting task 'rotate ALFA to -8.6 degrees' 2008-Apr-30 19:27:30 LOG5 begin_task: Level: (3) ID = <10169> Status = 0 0 0 0 ok 2008-Apr-30 19:27:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -8.6 degrees ...} 2008-Apr-30 19:27:30 INFO2 rotate_alfa: ALFA commanded to -8.6 degrees 2008-Apr-30 19:27:30 LOG3 sock_errsend: To ALFAMOTOR: POSITION -8.6 REPLY 2008-Apr-30 19:27:30 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-30 19:27:30 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-30 19:27:30 LOG5 begin_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2008-Apr-30 19:27:30 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p1_018" 2008-Apr-30 19:27:30 LOG4 got_cormsg: From DATATAKING: set ra 210.37 2008-Apr-30 19:27:30 LOG4 got_cormsg: From DATATAKING: set dec 5.9052268118 2008-Apr-30 19:27:30 LOG4 got_cormsg: From DATATAKING: vw% 210.37 2008-Apr-30 19:27:30 LOG4 got_cormsg: From DATATAKING: vw% 5.9052268118 2008-Apr-30 19:27:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 19:27:30 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-30 19:27:30 LOG4 got_cormsg: From DATATAKING: pnt tr 210.37 5.9052268118 -CF 2008-Apr-30 19:27:30 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-30 19:27:30 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-30 19:27:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 19:27:48 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-30 19:27:48 INFO3 alfa_motor: ALFA rotator in-position -8.60 degrees 2008-Apr-30 19:27:48 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-30 19:27:48 LOG5 end_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2008-Apr-30 19:27:48 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-30 19:27:48 STOP finish_task: Finishing task 'rotate ALFA to -8.6 degrees' 2008-Apr-30 19:27:48 LOG5 finish_task: Level: (3) ID = <10169> Status = 0 0 0 0 ok 2008-Apr-30 19:27:48 INFO2 finish_task: DONE finished configuration: rotating ALFA to -8.6 degrees 2008-Apr-30 19:27:48 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 19:27:48 STOP end_task: Finishing task 'rotate ALFA to -8.6 degrees' with status 'OK' 2008-Apr-30 19:27:48 LOG5 end_task: Level: (3) ID = <10169> Status = 0 0 0 0 ok 2008-Apr-30 19:27:48 START begin_task: Starting task 'waiting on telescope' 2008-Apr-30 19:27:48 LOG5 begin_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2008-Apr-30 19:27:48 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-30 19:27:48 LOG3 waittrk: Start waittrk 5 2008-Apr-30 19:27:48 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-30 19:27:48 LOG5 begin_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2008-Apr-30 19:27:53 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-30 19:27:53 LOG5 end_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2008-Apr-30 19:27:53 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-30 19:27:53 LOG5 begin_task: Level: (4) ID = <10173> Status = 0 0 0 0 ok 2008-Apr-30 19:29:15 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-30 19:29:15 LOG5 end_task: Level: (4) ID = <10173> Status = 0 0 0 0 ok 2008-Apr-30 19:29:15 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-30 19:29:15 INFO2 waittrk: Now tracking AGES3193_p1_018 2008-Apr-30 19:29:15 LOG4 waittrk: Current telescope position: Az = 209.97 ZA = 5.92 2008-Apr-30 19:29:15 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-30 19:29:15 LOG5 finish_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2008-Apr-30 19:29:15 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-30 19:29:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 19:29:15 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-30 19:29:15 LOG5 end_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2008-Apr-30 19:29:15 START begin_task: Starting task 'selecting calibration type' 2008-Apr-30 19:29:15 LOG5 begin_task: Level: (3) ID = <10174> Status = 0 0 0 0 ok 2008-Apr-30 19:29:15 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-30 19:29:15 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-30 19:29:15 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 19:29:15 START begin_task: Starting task 'waiting on setcal' 2008-Apr-30 19:29:15 LOG5 begin_task: Level: (4) ID = <10175> Status = 0 0 0 0 ok 2008-Apr-30 19:29:15 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-30 19:29:15 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 19:29:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 19:29:16 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-30 19:29:16 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-30 19:29:16 LOG5 end_task: Level: (4) ID = <10175> Status = 0 0 0 0 ok 2008-Apr-30 19:29:16 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-30 19:29:16 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-30 19:29:16 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-30 19:29:16 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-30 19:29:16 LOG5 begin_task: Level: (4) ID = <10176> Status = 0 0 0 0 ok 2008-Apr-30 19:29:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 19:29:17 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-30 19:29:17 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-30 19:29:17 LOG5 end_task: Level: (4) ID = <10176> Status = 0 0 0 0 ok 2008-Apr-30 19:29:17 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-30 19:29:17 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-30 19:29:17 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-30 19:29:17 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-30 19:29:17 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-30 19:29:17 LOG5 begin_task: Level: (4) ID = <10177> Status = 0 0 0 0 ok 2008-Apr-30 19:29:17 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-30 19:29:17 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-30 19:29:17 LOG5 end_task: Level: (4) ID = <10177> Status = 0 0 0 0 ok 2008-Apr-30 19:29:17 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-30 19:29:17 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-30 19:29:17 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-30 19:29:17 LOG5 finish_task: Level: (3) ID = <10174> Status = 0 0 0 0 ok 2008-Apr-30 19:29:17 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-30 19:29:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 19:29:17 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-30 19:29:17 LOG5 end_task: Level: (3) ID = <10174> Status = 0 0 0 0 ok 2008-Apr-30 19:29:17 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2008-Apr-30 19:29:17 INFO2 astwait: Waiting for 8 seconds from 23:29:17 to 23:29:25 UTC ... 2008-Apr-30 19:29:17 LOG4 send_obs_status: To obs_status: <1> TASKTIME 8 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-30 19:29:17 START begin_task: Starting task 'waiting on waiting for AST time' 2008-Apr-30 19:29:17 LOG5 begin_task: Level: (3) ID = <10178> Status = 0 0 0 0 ok 2008-Apr-30 19:29:25 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2008-Apr-30 19:29:25 LOG5 end_task: Level: (3) ID = <10178> Status = 0 0 0 0 ok 2008-Apr-30 19:29:25 INFO3 astwait: Finished waiting 2008-Apr-30 19:29:25 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-30 19:29:25 LOG5 dopset_later: Calling 'dopset_later 61.07673945172823' 2008-Apr-30 19:29:25 INFO3 dopset_later: Setting Doppler correction for 19:30:25 (61.1 seconds from now) 2008-Apr-30 19:29:25 LOG5 antvel: Calling 'antvel 210.370000 5.905227 F 61.07673945172823' 2008-Apr-30 19:29:25 LOG2 antvel: Parameters to Doppler: Heliocentric 84625 2008 121 0.0 2008-Apr-30 19:29:25 INFO5 antvel: Computed antenna velocity: +28.41706 km/s 2008-Apr-30 19:29:25 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=28.417058642699999 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-30 19:29:25 INFO4 dopset_gen: New sky frequencies: 1381.112514 1381.112514 1381.112514 1381.112514 1381.112514 1381.112514 1381.112514 1381.112514 1381.112514 2008-Apr-30 19:29:25 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.112514 sky0=1381.112514 sky1=1381.112514 sky2=1381.112514 sky3=1381.112514 sky4=1381.112514 sky5=1381.112514 sky6=1381.112514 sky7=1381.112514 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-30 19:29:25 LOG2 dopset_gen: Result from 'sky2syn': 1631.112514 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-30 19:29:25 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631112514.0} 2008-Apr-30 19:29:25 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 19:29:25 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-30 19:29:25 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-30 19:29:25 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:02.9 Dec = +23:27:32.6 2008-Apr-30 19:29:25 LOG3 track_source: Calling 'track_source AGES3193_p1_018 095202.9 232732.6 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-30 19:29:25 START begin_task: Starting task 'sending tracking commands' 2008-Apr-30 19:29:25 LOG5 begin_task: Level: (3) ID = <10179> Status = 0 0 0 0 ok 2008-Apr-30 19:29:25 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p1_018} INFO {Slewing to source 'AGES3193_p1_018' ...} 2008-Apr-30 19:29:25 INFO1 track_source: Starting to track AGES3193_p1_018 2008-Apr-30 19:29:25 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p1_018" 2008-Apr-30 19:29:25 LOG3 vw_send: To DATATAKING: set ra 095202.9 2008-Apr-30 19:29:25 LOG3 vw_send: To DATATAKING: set dec 232732.6 2008-Apr-30 19:29:25 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-30 19:29:25 LOG3 vw_send: To DATATAKING: pnt tr 095202.9 232732.6 -CJ 2008-Apr-30 19:29:25 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-30 19:29:25 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-30 19:29:25 LOG5 finish_task: Level: (3) ID = <10179> Status = 0 0 0 0 ok 2008-Apr-30 19:29:25 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-30 19:29:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 19:29:25 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-30 19:29:25 LOG5 end_task: Level: (3) ID = <10179> Status = 0 0 0 0 ok 2008-Apr-30 19:29:25 START begin_task: Starting task 'waiting on telescope' 2008-Apr-30 19:29:25 LOG5 begin_task: Level: (3) ID = <10180> Status = 0 0 0 0 ok 2008-Apr-30 19:29:25 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-30 19:29:25 LOG3 waittrk: Start waittrk 5 2008-Apr-30 19:29:25 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-30 19:29:25 LOG5 begin_task: Level: (4) ID = <10181> Status = 0 0 0 0 ok 2008-Apr-30 19:29:25 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631112514.0} 2008-Apr-30 19:29:25 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 19:29:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 19:29:25 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p1_018" 2008-Apr-30 19:29:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 19:29:25 LOG4 got_cormsg: From DATATAKING: vw% set ra 095202.9 2008-Apr-30 19:29:25 LOG4 got_cormsg: From DATATAKING: set dec 232732.6 2008-Apr-30 19:29:25 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-30 19:29:25 LOG4 got_cormsg: From DATATAKING: pnt tr 095202.9 232732.6 -CJ 2008-Apr-30 19:29:25 LOG4 got_cormsg: From DATATAKING: 095202.9 2008-Apr-30 19:29:25 LOG4 got_cormsg: From DATATAKING: vw% 232732.6 2008-Apr-30 19:29:25 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2008-Apr-30 19:29:25 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-30 19:29:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 19:29:30 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-30 19:29:30 LOG5 end_task: Level: (4) ID = <10181> Status = 0 0 0 0 ok 2008-Apr-30 19:29:30 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-30 19:29:30 LOG5 begin_task: Level: (4) ID = <10182> Status = 0 0 0 0 ok 2008-Apr-30 19:29:32 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-30 19:29:32 LOG5 end_task: Level: (4) ID = <10182> Status = 0 0 0 0 ok 2008-Apr-30 19:29:32 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-30 19:29:32 INFO2 waittrk: Now tracking AGES3193_p1_018 2008-Apr-30 19:29:32 LOG4 waittrk: Current telescope position: Az = 209.83 ZA = 5.92 2008-Apr-30 19:29:32 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-30 19:29:32 LOG5 finish_task: Level: (3) ID = <10180> Status = 0 0 0 0 ok 2008-Apr-30 19:29:32 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-30 19:29:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 19:29:32 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-30 19:29:32 LOG5 end_task: Level: (3) ID = <10180> Status = 0 0 0 0 ok 2008-Apr-30 19:29:32 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-30 19:29:32 LOG5 begin_task: Level: (3) ID = <10183> Status = 0 0 0 0 ok 2008-Apr-30 19:29:32 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-30 19:29:32 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-30 19:29:32 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-30 19:29:32 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-30 19:29:32 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 19:29:32 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-30 19:29:32 LOG5 begin_task: Level: (4) ID = <10184> Status = 0 0 0 0 ok 2008-Apr-30 19:29:33 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-30 19:29:33 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 19:29:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 19:29:35 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-30 19:29:35 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-30 19:29:35 LOG5 end_task: Level: (4) ID = <10184> Status = 0 0 0 0 ok 2008-Apr-30 19:29:35 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-30 19:29:35 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-30 19:29:35 LOG5 begin_task: Level: (4) ID = <10185> Status = 0 0 0 0 ok 2008-Apr-30 19:29:35 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-30 19:29:35 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-30 19:29:35 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-30 19:29:35 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-30 19:29:35 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-30 19:29:35 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-30 19:29:35 LOG5 begin_task: Level: (5) ID = <10186> Status = 0 0 0 0 ok 2008-Apr-30 19:29:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 19:29:36 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-30 19:29:36 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 0 dB --- beam 1: 7 6 dB 2008-Apr-30 19:29:36 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 2 dB --- beam 5: 6 5 dB 2008-Apr-30 19:29:36 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 3 dB --- beam 3: 4 3 dB 2008-Apr-30 19:29:36 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 2 2 dB 2008-Apr-30 19:29:36 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-30 19:29:36 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-30 19:29:36 LOG5 end_task: Level: (5) ID = <10186> Status = 0 0 0 0 ok 2008-Apr-30 19:29:36 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.895 0.872 ALFA beam 1: 1.079 1.020 2008-Apr-30 19:29:36 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.950 1.107 ALFA beam 3: 0.899 0.988 2008-Apr-30 19:29:36 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.072 1.099 ALFA beam 5: 0.953 1.077 2008-Apr-30 19:29:36 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.955 0.961 ALFA beam 7: 1.042 1.066 2008-Apr-30 19:29:36 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-30 19:29:36 LOG5 finish_task: Level: (4) ID = <10185> Status = 0 0 0 0 ok 2008-Apr-30 19:29:36 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-30 19:29:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 19:29:36 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-30 19:29:36 LOG5 end_task: Level: (4) ID = <10185> Status = 0 0 0 0 ok 2008-Apr-30 19:29:36 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-30 19:29:36 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-30 19:29:36 LOG5 finish_task: Level: (3) ID = <10183> Status = 0 0 0 0 ok 2008-Apr-30 19:29:36 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-30 19:29:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 19:29:36 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-30 19:29:36 LOG5 end_task: Level: (3) ID = <10183> Status = 0 0 0 0 ok 2008-Apr-30 19:29:36 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 SS 2008-Apr-30 19:29:36 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 SS 2008-Apr-30 19:29:36 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 SS 2008-Apr-30 19:29:36 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 SS 2008-Apr-30 19:29:36 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-30 19:29:36 START begin_task: Starting task 'WAPP calibration' 2008-Apr-30 19:29:36 LOG5 begin_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2008-Apr-30 19:29:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-30 19:29:36 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-30 19:29:36 START begin_task: Starting task 'selecting calibration type' 2008-Apr-30 19:29:36 LOG5 begin_task: Level: (4) ID = <10188> Status = 0 0 0 0 ok 2008-Apr-30 19:29:36 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-30 19:29:36 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-30 19:29:36 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 19:29:36 START begin_task: Starting task 'waiting on setcal' 2008-Apr-30 19:29:36 LOG5 begin_task: Level: (5) ID = <10189> Status = 0 0 0 0 ok 2008-Apr-30 19:29:36 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 SS' 2008-Apr-30 19:29:37 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-30 19:29:37 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 19:29:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 19:29:37 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-30 19:29:37 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-30 19:29:37 LOG5 end_task: Level: (5) ID = <10189> Status = 0 0 0 0 ok 2008-Apr-30 19:29:37 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-30 19:29:37 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-30 19:29:37 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-30 19:29:37 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-30 19:29:37 LOG5 begin_task: Level: (5) ID = <10190> Status = 0 0 0 0 ok 2008-Apr-30 19:29:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 19:29:37 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-30 19:29:37 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-30 19:29:37 LOG5 end_task: Level: (5) ID = <10190> Status = 0 0 0 0 ok 2008-Apr-30 19:29:37 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-30 19:29:37 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-30 19:29:37 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-30 19:29:37 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-30 19:29:37 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-30 19:29:37 LOG5 begin_task: Level: (5) ID = <10191> Status = 0 0 0 0 ok 2008-Apr-30 19:29:37 NOTE WAPPDATA-new_file: New FITS file: wapp.20080430.a2048.0003.fits 2008-Apr-30 19:29:37 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-30 19:29:37 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-30 19:29:37 LOG5 end_task: Level: (5) ID = <10191> Status = 0 0 0 0 ok 2008-Apr-30 19:29:37 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-30 19:29:37 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-30 19:29:37 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-30 19:29:37 LOG5 finish_task: Level: (4) ID = <10188> Status = 0 0 0 0 ok 2008-Apr-30 19:29:37 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-30 19:29:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 19:29:37 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-30 19:29:37 LOG5 end_task: Level: (4) ID = <10188> Status = 0 0 0 0 ok 2008-Apr-30 19:29:37 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-30 19:29:37 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-30 19:29:37 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-30 19:29:37 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-30 19:29:37 LOG5 begin_task: Level: (4) ID = <10192> Status = 0 0 0 0 ok 2008-Apr-30 19:29:37 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080430.a2048.0003.fits} 2008-Apr-30 19:29:37 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-30 19:29:37 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-30 19:29:37 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-30 19:29:37 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-30 19:29:37 LOG5 end_task: Level: (4) ID = <10192> Status = 0 0 0 0 ok 2008-Apr-30 19:29:37 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-30 19:29:37 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-30 19:29:37 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-30 19:29:37 LOG5 begin_task: Level: (4) ID = <10193> Status = 0 0 0 0 ok 2008-Apr-30 19:29:37 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-30 19:29:37 LOG5 log_alfabeam: Parameters: 9.8674722222222204 23.459055555555558 9.661437 2008.3335037201816 -8.600101 2008-Apr-30 19:29:37 LOG4 log_alfabeam: ALFABEAM 0 9.867472222222208 23.459055555555565 2008-Apr-30 19:29:37 LOG4 log_alfabeam: ALFABEAM 1 9.867821933587738 23.358396232755283 2008-Apr-30 19:29:37 LOG4 log_alfabeam: ALFABEAM 2 9.873679341533785 23.425179877234680 2008-Apr-30 19:29:37 LOG4 log_alfabeam: ALFABEAM 3 9.873316001343285 23.526372740174317 2008-Apr-30 19:29:37 LOG4 log_alfabeam: ALFABEAM 4 9.867001073119317 23.560076720166602 2008-Apr-30 19:29:37 LOG4 log_alfabeam: ALFABEAM 5 9.861240315803329 23.491439787028376 2008-Apr-30 19:29:37 LOG4 log_alfabeam: ALFABEAM 6 9.861697062900113 23.390948279735728 2008-Apr-30 19:29:37 INFO2 take_spectra: Starting WAPP scan: 812100105 2008-Apr-30 19:29:38 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-30 19:29:38 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-30 19:29:38 LOG5 begin_task: Level: (5) ID = <10194> Status = 0 0 0 0 ok 2008-Apr-30 19:29:38 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-30 19:29:38 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84579.00 2008-Apr-30 19:29:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.112514 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-30 19:29:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.112514 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 19:29:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.112514 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 19:29:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.112514 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-30 19:29:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.539 > 1.4)! 2008-Apr-30 19:29:44 LOG4 check_wapp_levels: WAPP-1 power levels: 0.895 0.872 1.079 1.020 2008-Apr-30 19:29:44 LOG4 check_wapp_levels: WAPP-2 power levels: 1.301 1.539 1.255 1.361 2008-Apr-30 19:29:44 LOG4 check_wapp_levels: WAPP-3 power levels: 1.072 1.099 0.953 1.077 2008-Apr-30 19:29:44 LOG4 check_wapp_levels: WAPP-4 power levels: 0.955 0.961 1.042 1.066 2008-Apr-30 19:29:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.112514 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 19:29:44 LOG3 WAPP=3+4-save_rfcalc: Channel 5: Sky freq = 1381.112514 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 19:29:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.112514 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 19:29:44 LOG3 WAPP=1+3+4-save_rfcalc: Channel 7: Sky freq = 1381.112514 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 19:29:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.112514 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 19:29:44 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-30 19:29:44 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-30 19:29:44 LOG5 end_task: Level: (5) ID = <10194> Status = 0 0 0 0 ok 2008-Apr-30 19:29:44 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-30 19:29:44 LOG5 end_task: Level: (4) ID = <10193> Status = 0 0 0 0 ok 2008-Apr-30 19:29:44 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-30 19:29:44 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-30 19:29:44 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-30 19:29:44 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-30 19:29:44 LOG5 begin_task: Level: (4) ID = <10195> Status = 0 0 0 0 ok 2008-Apr-30 19:29:44 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-30 19:29:44 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-30 19:29:44 LOG3 WAPP=1+2-save_rfcalc: Channel 5: Sky freq = 1381.112514 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 19:29:44 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-30 19:29:44 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-30 19:29:44 LOG5 end_task: Level: (4) ID = <10195> Status = 0 0 0 0 ok 2008-Apr-30 19:29:44 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-30 19:29:44 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-30 19:29:44 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-30 19:29:44 LOG5 begin_task: Level: (4) ID = <10196> Status = 0 0 0 0 ok 2008-Apr-30 19:29:44 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-30 19:29:44 LOG5 log_alfabeam: Parameters: 9.8674722222222204 23.459055555555558 9.663387 2008.3335039419983 -8.600101 2008-Apr-30 19:29:44 LOG4 log_alfabeam: ALFABEAM 0 9.867472222222206 23.459055555555565 2008-Apr-30 19:29:44 LOG4 log_alfabeam: ALFABEAM 1 9.867851754720151 23.358417246101990 2008-Apr-30 19:29:44 LOG4 log_alfabeam: ALFABEAM 2 9.873689361123063 23.425528610368371 2008-Apr-30 19:29:44 LOG4 log_alfabeam: ALFABEAM 3 9.873295967437578 23.526700948698004 2008-Apr-30 19:29:44 LOG4 log_alfabeam: ALFABEAM 4 9.866970812041853 23.560049696200483 2008-Apr-30 19:29:44 LOG4 log_alfabeam: ALFABEAM 5 9.861230701955554 23.491086253165289 2008-Apr-30 19:29:44 LOG4 log_alfabeam: ALFABEAM 6 9.861717474638997 23.390622194428715 2008-Apr-30 19:29:44 INFO2 take_spectra: Starting WAPP scan: 812100106 2008-Apr-30 19:29:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-30 19:29:45 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-30 19:29:45 LOG5 begin_task: Level: (5) ID = <10197> Status = 0 0 0 0 ok 2008-Apr-30 19:29:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-30 19:29:45 LOG3 WAPP=2-save_rfcalc: Channel 7: Sky freq = 1381.112514 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 19:29:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84586.00 2008-Apr-30 19:29:50 INFO5 check_wapp_levels: WAPP power levels are between 1.198 and 1.543 (still bad) 2008-Apr-30 19:29:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.112514 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-30 19:29:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.112514 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 19:29:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.112514 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 19:29:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.112514 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-30 19:29:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.112514 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 19:29:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.112514 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 19:29:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.112514 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 19:29:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.112514 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 19:29:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.112514 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 19:29:51 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-30 19:29:51 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-30 19:29:51 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-30 19:29:51 LOG5 end_task: Level: (5) ID = <10197> Status = 0 0 0 0 ok 2008-Apr-30 19:29:51 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-30 19:29:51 LOG5 end_task: Level: (4) ID = <10196> Status = 0 0 0 0 ok 2008-Apr-30 19:29:51 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-30 19:29:51 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-30 19:29:51 LOG5 finish_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2008-Apr-30 19:29:51 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-30 19:29:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 19:29:51 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-30 19:29:51 LOG5 end_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2008-Apr-30 19:29:51 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-30 19:29:51 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 210.37 and ZA = 5.91 2008-Apr-30 19:29:51 LOG3 track_source: Calling 'track_source AGES3193_p1_018 210.37 5.9052268118 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-30 19:29:51 START begin_task: Starting task 'sending tracking commands' 2008-Apr-30 19:29:51 LOG5 begin_task: Level: (3) ID = <10198> Status = 0 0 0 0 ok 2008-Apr-30 19:29:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p1_018} INFO {Slewing to source 'AGES3193_p1_018' ...} 2008-Apr-30 19:29:51 INFO1 track_source: Starting to track AGES3193_p1_018 2008-Apr-30 19:29:51 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p1_018" 2008-Apr-30 19:29:51 LOG3 vw_send: To DATATAKING: set ra 210.37 2008-Apr-30 19:29:51 LOG3 vw_send: To DATATAKING: set dec 5.9052268118 2008-Apr-30 19:29:51 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-30 19:29:51 LOG3 vw_send: To DATATAKING: pnt tr 210.37 5.9052268118 -CF 2008-Apr-30 19:29:51 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-30 19:29:51 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-30 19:29:51 LOG5 finish_task: Level: (3) ID = <10198> Status = 0 0 0 0 ok 2008-Apr-30 19:29:51 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-30 19:29:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 19:29:52 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-30 19:29:52 LOG5 end_task: Level: (3) ID = <10198> Status = 0 0 0 0 ok 2008-Apr-30 19:29:52 LOG1 fixed_driftmap: Parameters: HA = -00:12:59.9 Start = 09:40:29.4 LST = 09:39:55.2 diff = 34.2 secs 2008-Apr-30 19:29:52 INFO2 fixed_driftmap: Waiting 32.2 seconds for RA 9:53:29 2008-Apr-30 19:29:52 INFO2 lstwait: Waiting for 32.1 secs from LST 09:39:55 to LST 09:40:27 ... 2008-Apr-30 19:29:52 LOG4 send_obs_status: To obs_status: <1> TASKTIME 32.080527469972303 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-30 19:29:52 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-30 19:29:52 LOG5 begin_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2008-Apr-30 19:29:52 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p1_018" 2008-Apr-30 19:29:52 LOG4 got_cormsg: From DATATAKING: set ra 210.37 2008-Apr-30 19:29:52 LOG4 got_cormsg: From DATATAKING: set dec 5.9052268118 2008-Apr-30 19:29:52 LOG4 got_cormsg: From DATATAKING: vw% 210.37 2008-Apr-30 19:29:52 LOG4 got_cormsg: From DATATAKING: vw% 5.9052268118 2008-Apr-30 19:29:52 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 19:29:52 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-30 19:29:52 LOG4 got_cormsg: From DATATAKING: pnt tr 210.37 5.9052268118 -CF 2008-Apr-30 19:29:52 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-30 19:29:52 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-30 19:29:52 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 19:29:56 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.893 and 1.104 2008-Apr-30 19:30:24 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-30 19:30:24 LOG5 end_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2008-Apr-30 19:30:24 LOG4 lstwait: Finished waiting, the gui caused difference: -0.081559960001698073 2008-Apr-30 19:30:24 INFO3 lstwait: Finished waiting 2008-Apr-30 19:30:24 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-30 19:30:24 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-30 19:30:24 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-30 19:30:24 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-30 19:30:24 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-30 19:30:24 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-30 19:30:24 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-30 19:30:24 LOG5 begin_task: Level: (3) ID = <10200> Status = 0 0 0 0 ok 2008-Apr-30 19:30:24 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-30 19:30:24 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-30 19:30:24 INFO2 take_spectra: Starting WAPP scan: 812100107 2008-Apr-30 19:30:24 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-30 19:30:24 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-30 19:30:24 LOG5 begin_task: Level: (4) ID = <10201> Status = 0 0 0 0 ok 2008-Apr-30 19:30:24 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-30 19:30:24 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84625.00 2008-Apr-30 19:30:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.112514 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-30 19:30:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.112514 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 19:30:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.112514 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 19:30:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.112514 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-30 19:30:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.112514 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 19:30:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.112514 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 19:30:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.112514 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 19:30:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.112514 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 19:30:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.112514 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 19:30:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.569 < 0.8)! 2008-Apr-30 19:30:43 LOG4 check_wapp_levels: WAPP-1 power levels: 0.895 0.569 1.082 1.024 2008-Apr-30 19:30:43 LOG4 check_wapp_levels: WAPP-2 power levels: 0.948 1.106 0.903 0.989 2008-Apr-30 19:30:43 LOG4 check_wapp_levels: WAPP-3 power levels: 1.079 1.105 0.953 1.079 2008-Apr-30 19:30:43 LOG4 check_wapp_levels: WAPP-4 power levels: 0.959 0.962 1.046 1.069 2008-Apr-30 19:30:45 INFO5 check_wapp_levels: WAPP power levels are between 0.560 and 1.106 (still bad) 2008-Apr-30 19:30:47 INFO5 check_wapp_levels: WAPP power levels are between 0.570 and 1.107 (still bad) 2008-Apr-30 19:30:49 INFO5 check_wapp_levels: WAPP power levels are between 0.575 and 1.108 (still bad) 2008-Apr-30 19:30:51 INFO5 check_wapp_levels: WAPP power levels are between 0.577 and 1.107 (still bad) 2008-Apr-30 19:30:53 INFO5 check_wapp_levels: WAPP power levels are between 0.579 and 1.105 (still bad) 2008-Apr-30 19:30:55 INFO5 check_wapp_levels: WAPP power levels are between 0.582 and 1.106 (still bad) 2008-Apr-30 19:30:57 INFO5 check_wapp_levels: WAPP power levels are between 0.583 and 1.106 (still bad) 2008-Apr-30 19:30:59 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.894 and 1.106 2008-Apr-30 19:32:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.708 < 0.8)! 2008-Apr-30 19:32:20 LOG4 check_wapp_levels: WAPP-1 power levels: 0.892 0.708 1.077 1.014 2008-Apr-30 19:32:20 LOG4 check_wapp_levels: WAPP-2 power levels: 0.951 1.104 0.903 0.990 2008-Apr-30 19:32:20 LOG4 check_wapp_levels: WAPP-3 power levels: 1.077 1.102 0.953 1.079 2008-Apr-30 19:32:20 LOG4 check_wapp_levels: WAPP-4 power levels: 0.962 0.967 1.049 1.074 2008-Apr-30 19:32:22 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.106 (still bad) 2008-Apr-30 19:32:24 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.106 (still bad) 2008-Apr-30 19:32:26 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.105 (still bad) 2008-Apr-30 19:32:28 INFO5 check_wapp_levels: WAPP power levels are between 0.536 and 1.107 (still bad) 2008-Apr-30 19:32:30 INFO5 check_wapp_levels: WAPP power levels are between 0.539 and 1.107 (still bad) 2008-Apr-30 19:32:32 INFO5 check_wapp_levels: WAPP power levels are between 0.539 and 1.107 (still bad) 2008-Apr-30 19:32:34 INFO5 check_wapp_levels: WAPP power levels are between 0.541 and 1.105 (still bad) 2008-Apr-30 19:32:36 INFO5 check_wapp_levels: WAPP power levels are between 0.541 and 1.105 (still bad) 2008-Apr-30 19:32:38 INFO5 check_wapp_levels: WAPP power levels are between 0.543 and 1.105 (still bad) 2008-Apr-30 19:32:40 INFO5 check_wapp_levels: WAPP power levels are between 0.544 and 1.108 (still bad) 2008-Apr-30 19:32:42 INFO5 check_wapp_levels: WAPP power levels are between 0.545 and 1.111 (still bad) 2008-Apr-30 19:32:44 INFO5 check_wapp_levels: WAPP power levels are between 0.546 and 1.115 (still bad) 2008-Apr-30 19:32:46 INFO5 check_wapp_levels: WAPP power levels are between 0.548 and 1.118 (still bad) 2008-Apr-30 19:32:48 INFO5 check_wapp_levels: WAPP power levels are between 0.549 and 1.121 (still bad) 2008-Apr-30 19:32:50 INFO5 check_wapp_levels: WAPP power levels are between 0.550 and 1.123 (still bad) 2008-Apr-30 19:32:52 INFO5 check_wapp_levels: WAPP power levels are between 0.654 and 1.123 (still bad) 2008-Apr-30 19:32:54 INFO5 check_wapp_levels: WAPP power levels are between 0.759 and 1.120 (still bad) 2008-Apr-30 19:32:56 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.890 and 1.116 2008-Apr-30 19:35:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.679 < 0.8)! 2008-Apr-30 19:35:18 LOG4 check_wapp_levels: WAPP-1 power levels: 0.892 0.679 1.078 1.019 2008-Apr-30 19:35:18 LOG4 check_wapp_levels: WAPP-2 power levels: 0.949 1.106 0.905 0.991 2008-Apr-30 19:35:18 LOG4 check_wapp_levels: WAPP-3 power levels: 1.078 1.105 0.955 1.079 2008-Apr-30 19:35:18 LOG4 check_wapp_levels: WAPP-4 power levels: 0.960 0.968 1.044 1.074 2008-Apr-30 19:35:20 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.818 and 1.107 2008-Apr-30 19:35:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.738 < 0.8)! 2008-Apr-30 19:35:22 LOG4 check_wapp_levels: WAPP-1 power levels: 0.891 0.738 1.078 1.020 2008-Apr-30 19:35:22 LOG4 check_wapp_levels: WAPP-2 power levels: 0.948 1.105 0.906 0.991 2008-Apr-30 19:35:22 LOG4 check_wapp_levels: WAPP-3 power levels: 1.078 1.106 0.956 1.080 2008-Apr-30 19:35:22 LOG4 check_wapp_levels: WAPP-4 power levels: 0.960 0.967 1.044 1.072 2008-Apr-30 19:35:24 INFO5 check_wapp_levels: WAPP power levels are between 0.731 and 1.106 (still bad) 2008-Apr-30 19:35:26 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.887 and 1.107 2008-Apr-30 19:36:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.605 < 0.8)! 2008-Apr-30 19:36:55 LOG4 check_wapp_levels: WAPP-1 power levels: 0.894 0.605 1.076 1.021 2008-Apr-30 19:36:55 LOG4 check_wapp_levels: WAPP-2 power levels: 0.952 1.104 0.906 0.991 2008-Apr-30 19:36:55 LOG4 check_wapp_levels: WAPP-3 power levels: 1.074 1.104 0.956 1.082 2008-Apr-30 19:36:55 LOG4 check_wapp_levels: WAPP-4 power levels: 0.959 0.967 1.045 1.074 2008-Apr-30 19:36:57 INFO5 check_wapp_levels: WAPP power levels are between 0.605 and 1.105 (still bad) 2008-Apr-30 19:36:59 INFO5 check_wapp_levels: WAPP power levels are between 0.611 and 1.106 (still bad) 2008-Apr-30 19:37:01 INFO5 check_wapp_levels: WAPP power levels are between 0.613 and 1.105 (still bad) 2008-Apr-30 19:37:03 INFO5 check_wapp_levels: WAPP power levels are between 0.615 and 1.105 (still bad) 2008-Apr-30 19:37:05 INFO5 check_wapp_levels: WAPP power levels are between 0.617 and 1.106 (still bad) 2008-Apr-30 19:37:07 INFO5 check_wapp_levels: WAPP power levels are between 0.618 and 1.105 (still bad) 2008-Apr-30 19:37:09 INFO5 check_wapp_levels: WAPP power levels are between 0.619 and 1.107 (still bad) 2008-Apr-30 19:37:11 INFO5 check_wapp_levels: WAPP power levels are between 0.622 and 1.106 (still bad) 2008-Apr-30 19:37:13 INFO5 check_wapp_levels: WAPP power levels are between 0.622 and 1.106 (still bad) 2008-Apr-30 19:37:15 INFO5 check_wapp_levels: WAPP power levels are between 0.622 and 1.106 (still bad) 2008-Apr-30 19:37:17 INFO5 check_wapp_levels: WAPP power levels are between 0.551 and 1.106 (still bad) 2008-Apr-30 19:37:19 INFO5 check_wapp_levels: WAPP power levels are between 0.554 and 1.106 (still bad) 2008-Apr-30 19:37:21 INFO5 check_wapp_levels: WAPP power levels are between 0.554 and 1.107 (still bad) 2008-Apr-30 19:37:23 INFO5 check_wapp_levels: WAPP power levels are between 0.557 and 1.105 (still bad) 2008-Apr-30 19:37:25 INFO5 check_wapp_levels: WAPP power levels are between 0.559 and 1.106 (still bad) 2008-Apr-30 19:37:27 INFO5 check_wapp_levels: WAPP power levels are between 0.558 and 1.105 (still bad) 2008-Apr-30 19:37:29 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.891 and 1.106 2008-Apr-30 19:37:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.729 < 0.8)! 2008-Apr-30 19:37:35 LOG4 check_wapp_levels: WAPP-1 power levels: 0.892 0.729 1.077 1.020 2008-Apr-30 19:37:35 LOG4 check_wapp_levels: WAPP-2 power levels: 0.950 1.105 0.908 0.995 2008-Apr-30 19:37:35 LOG4 check_wapp_levels: WAPP-3 power levels: 1.078 1.105 0.959 1.078 2008-Apr-30 19:37:35 LOG4 check_wapp_levels: WAPP-4 power levels: 0.959 0.966 1.044 1.071 2008-Apr-30 19:37:37 INFO5 check_wapp_levels: WAPP power levels are between 0.608 and 1.107 (still bad) 2008-Apr-30 19:37:39 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.895 and 1.106 2008-Apr-30 19:37:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.676 < 0.8)! 2008-Apr-30 19:37:52 LOG4 check_wapp_levels: WAPP-1 power levels: 0.891 0.676 1.079 1.022 2008-Apr-30 19:37:52 LOG4 check_wapp_levels: WAPP-2 power levels: 0.952 1.107 0.913 0.999 2008-Apr-30 19:37:52 LOG4 check_wapp_levels: WAPP-3 power levels: 1.079 1.109 0.959 1.079 2008-Apr-30 19:37:52 LOG4 check_wapp_levels: WAPP-4 power levels: 0.959 0.967 1.045 1.073 2008-Apr-30 19:37:54 INFO5 check_wapp_levels: WAPP power levels are between 0.682 and 1.110 (still bad) 2008-Apr-30 19:37:56 INFO5 check_wapp_levels: WAPP power levels are between 0.683 and 1.111 (still bad) 2008-Apr-30 19:37:58 INFO5 check_wapp_levels: WAPP power levels are between 0.686 and 1.114 (still bad) 2008-Apr-30 19:38:00 INFO5 check_wapp_levels: WAPP power levels are between 0.692 and 1.113 (still bad) 2008-Apr-30 19:38:02 INFO5 check_wapp_levels: WAPP power levels are between 0.696 and 1.115 (still bad) 2008-Apr-30 19:38:04 INFO5 check_wapp_levels: WAPP power levels are between 0.695 and 1.112 (still bad) 2008-Apr-30 19:38:06 INFO5 check_wapp_levels: WAPP power levels are between 0.703 and 1.112 (still bad) 2008-Apr-30 19:38:08 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.891 and 1.112 2008-Apr-30 19:50:25 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-30 19:50:25 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-30 19:50:25 LOG5 end_task: Level: (4) ID = <10201> Status = 0 0 0 0 ok 2008-Apr-30 19:50:25 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-30 19:50:25 LOG5 end_task: Level: (3) ID = <10200> Status = 0 0 0 0 ok 2008-Apr-30 19:50:25 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-30 19:50:25 LOG5 finish_task: Level: (2) ID = <10167> Status = 0 0 0 0 ok 2008-Apr-30 19:50:25 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-30 19:50:25 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-30 19:50:25 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-30 19:50:25 LOG5 end_task: Level: (2) ID = <10167> Status = 0 0 0 0 ok 2008-Apr-30 19:50:25 COMMAND run_command_line: EXECUTING command 19: 'FIXEDDRIFT az=149.37 alfaangle=47.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p1_020 ra=95300.00 dec=232430.00' 2008-Apr-30 19:50:25 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-30 19:50:26 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-30 19:50:26 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 149.37 47.1 hcorcal 5 tracking no first 1 AGES3193_p1_020 95300.00 232430.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-30 19:50:26 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-30 19:50:26 LOG5 begin_task: Level: (2) ID = <10202> Status = 0 0 0 0 ok 2008-Apr-30 19:50:26 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES3193_p1_018' 2008-Apr-30 19:50:26 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-30 19:50:26 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p1_020} 2008-Apr-30 19:50:26 INFO3 fixed_driftmap: Sending telescope to Az = 149.37 and ZA = 5.86 2008-Apr-30 19:50:26 LOG3 track_source: Calling 'track_source AGES3193_p1_020 149.37 5.8629157601 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-30 19:50:26 START begin_task: Starting task 'sending tracking commands' 2008-Apr-30 19:50:26 LOG5 begin_task: Level: (3) ID = <10203> Status = 0 0 0 0 ok 2008-Apr-30 19:50:26 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p1_020} INFO {Slewing to source 'AGES3193_p1_020' ...} 2008-Apr-30 19:50:26 INFO1 track_source: Starting to track AGES3193_p1_020 2008-Apr-30 19:50:26 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p1_020" 2008-Apr-30 19:50:26 LOG3 vw_send: To DATATAKING: set ra 149.37 2008-Apr-30 19:50:26 LOG3 vw_send: To DATATAKING: set dec 5.8629157601 2008-Apr-30 19:50:26 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-30 19:50:26 LOG3 vw_send: To DATATAKING: pnt tr 149.37 5.8629157601 -CF 2008-Apr-30 19:50:26 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-30 19:50:26 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-30 19:50:26 LOG5 finish_task: Level: (3) ID = <10203> Status = 0 0 0 0 ok 2008-Apr-30 19:50:26 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-30 19:50:26 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 19:50:26 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-30 19:50:26 LOG5 end_task: Level: (3) ID = <10203> Status = 0 0 0 0 ok 2008-Apr-30 19:50:26 START begin_task: Starting task 'rotate ALFA to +47.1 degrees' 2008-Apr-30 19:50:26 LOG5 begin_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2008-Apr-30 19:50:26 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +47.1 degrees ...} 2008-Apr-30 19:50:26 INFO2 rotate_alfa: ALFA commanded to +47.1 degrees 2008-Apr-30 19:50:26 LOG3 sock_errsend: To ALFAMOTOR: POSITION 47.1 REPLY 2008-Apr-30 19:50:26 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-30 19:50:26 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-30 19:50:26 LOG5 begin_task: Level: (4) ID = <10205> Status = 0 0 0 0 ok 2008-Apr-30 19:50:26 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p1_020" 2008-Apr-30 19:50:26 LOG4 got_cormsg: From DATATAKING: set ra 149.37 2008-Apr-30 19:50:26 LOG4 got_cormsg: From DATATAKING: set dec 5.8629157601 2008-Apr-30 19:50:26 LOG4 got_cormsg: From DATATAKING: vw% 149.37 2008-Apr-30 19:50:26 LOG4 got_cormsg: From DATATAKING: vw% 5.8629157601 2008-Apr-30 19:50:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 19:50:26 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-30 19:50:26 LOG4 got_cormsg: From DATATAKING: pnt tr 149.37 5.8629157601 -CF 2008-Apr-30 19:50:26 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-30 19:50:26 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2008-Apr-30 19:50:58 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-30 19:50:58 INFO3 alfa_motor: ALFA rotator in-position +47.10 degrees 2008-Apr-30 19:50:58 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-30 19:50:58 LOG5 end_task: Level: (4) ID = <10205> Status = 0 0 0 0 ok 2008-Apr-30 19:50:58 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-30 19:50:58 STOP finish_task: Finishing task 'rotate ALFA to +47.1 degrees' 2008-Apr-30 19:50:58 LOG5 finish_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2008-Apr-30 19:50:58 INFO2 finish_task: DONE finished configuration: rotating ALFA to +47.1 degrees 2008-Apr-30 19:50:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 19:50:58 STOP end_task: Finishing task 'rotate ALFA to +47.1 degrees' with status 'OK' 2008-Apr-30 19:50:58 LOG5 end_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2008-Apr-30 19:50:58 START begin_task: Starting task 'waiting on telescope' 2008-Apr-30 19:50:58 LOG5 begin_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2008-Apr-30 19:50:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-30 19:50:58 LOG3 waittrk: Start waittrk 5 2008-Apr-30 19:50:58 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-30 19:50:58 LOG5 begin_task: Level: (4) ID = <10207> Status = 0 0 0 0 ok 2008-Apr-30 19:51:03 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-30 19:51:03 LOG5 end_task: Level: (4) ID = <10207> Status = 0 0 0 0 ok 2008-Apr-30 19:51:03 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-30 19:51:03 LOG5 begin_task: Level: (4) ID = <10208> Status = 0 0 0 0 ok 2008-Apr-30 19:53:05 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-30 19:53:05 LOG5 end_task: Level: (4) ID = <10208> Status = 0 0 0 0 ok 2008-Apr-30 19:53:05 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-30 19:53:05 INFO2 waittrk: Now tracking AGES3193_p1_020 2008-Apr-30 19:53:05 LOG4 waittrk: Current telescope position: Az = 149.16 ZA = 5.88 2008-Apr-30 19:53:05 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-30 19:53:05 LOG5 finish_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2008-Apr-30 19:53:05 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-30 19:53:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 19:53:05 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-30 19:53:05 LOG5 end_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2008-Apr-30 19:53:05 START begin_task: Starting task 'selecting calibration type' 2008-Apr-30 19:53:05 LOG5 begin_task: Level: (3) ID = <10209> Status = 0 0 0 0 ok 2008-Apr-30 19:53:05 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-30 19:53:05 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-30 19:53:05 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 19:53:05 START begin_task: Starting task 'waiting on setcal' 2008-Apr-30 19:53:05 LOG5 begin_task: Level: (4) ID = <10210> Status = 0 0 0 0 ok 2008-Apr-30 19:53:05 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-30 19:53:05 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 19:53:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 19:53:06 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-30 19:53:06 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-30 19:53:06 LOG5 end_task: Level: (4) ID = <10210> Status = 0 0 0 0 ok 2008-Apr-30 19:53:06 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-30 19:53:06 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-30 19:53:06 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-30 19:53:06 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-30 19:53:06 LOG5 begin_task: Level: (4) ID = <10211> Status = 0 0 0 0 ok 2008-Apr-30 19:53:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 19:53:06 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-30 19:53:06 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-30 19:53:06 LOG5 end_task: Level: (4) ID = <10211> Status = 0 0 0 0 ok 2008-Apr-30 19:53:06 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-30 19:53:06 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-30 19:53:06 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-30 19:53:06 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-30 19:53:06 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-30 19:53:06 LOG5 begin_task: Level: (4) ID = <10212> Status = 0 0 0 0 ok 2008-Apr-30 19:53:06 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-30 19:53:06 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-30 19:53:06 LOG5 end_task: Level: (4) ID = <10212> Status = 0 0 0 0 ok 2008-Apr-30 19:53:06 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-30 19:53:06 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-30 19:53:06 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-30 19:53:06 LOG5 finish_task: Level: (3) ID = <10209> Status = 0 0 0 0 ok 2008-Apr-30 19:53:06 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-30 19:53:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 19:53:06 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-30 19:53:06 LOG5 end_task: Level: (3) ID = <10209> Status = 0 0 0 0 ok 2008-Apr-30 19:53:06 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2008-Apr-30 19:53:06 INFO2 astwait: Waiting for 135 seconds from 23:53:06 to 23:55:21 UTC ... 2008-Apr-30 19:53:06 LOG4 send_obs_status: To obs_status: <1> TASKTIME 135 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-30 19:53:06 START begin_task: Starting task 'waiting on waiting for AST time' 2008-Apr-30 19:53:06 LOG5 begin_task: Level: (3) ID = <10213> Status = 0 0 0 0 ok 2008-Apr-30 19:55:21 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2008-Apr-30 19:55:21 LOG5 end_task: Level: (3) ID = <10213> Status = 0 0 0 0 ok 2008-Apr-30 19:55:21 INFO3 astwait: Finished waiting 2008-Apr-30 19:55:21 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-30 19:55:21 LOG5 dopset_later: Calling 'dopset_later 60.742524011990227' 2008-Apr-30 19:55:21 INFO3 dopset_later: Setting Doppler correction for 19:56:21 (60.7 seconds from now) 2008-Apr-30 19:55:21 LOG5 antvel: Calling 'antvel 149.370000 5.862916 F 60.742524011990227' 2008-Apr-30 19:55:21 LOG2 antvel: Parameters to Doppler: Heliocentric 86181 2008 121 0.0 2008-Apr-30 19:55:21 INFO5 antvel: Computed antenna velocity: +28.46705 km/s 2008-Apr-30 19:55:21 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=28.4670498915 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-30 19:55:21 INFO4 dopset_gen: New sky frequencies: 1381.112284 1381.112284 1381.112284 1381.112284 1381.112284 1381.112284 1381.112284 1381.112284 1381.112284 2008-Apr-30 19:55:21 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.112284 sky0=1381.112284 sky1=1381.112284 sky2=1381.112284 sky3=1381.112284 sky4=1381.112284 sky5=1381.112284 sky6=1381.112284 sky7=1381.112284 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-30 19:55:21 LOG2 dopset_gen: Result from 'sky2syn': 1631.112284 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-30 19:55:21 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631112284.0} 2008-Apr-30 19:55:21 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 19:55:21 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-30 19:55:21 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-30 19:55:21 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:03.2 Dec = +23:24:32.6 2008-Apr-30 19:55:21 LOG3 track_source: Calling 'track_source AGES3193_p1_020 095203.2 232432.6 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-30 19:55:21 START begin_task: Starting task 'sending tracking commands' 2008-Apr-30 19:55:21 LOG5 begin_task: Level: (3) ID = <10214> Status = 0 0 0 0 ok 2008-Apr-30 19:55:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p1_020} INFO {Slewing to source 'AGES3193_p1_020' ...} 2008-Apr-30 19:55:21 INFO1 track_source: Starting to track AGES3193_p1_020 2008-Apr-30 19:55:21 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p1_020" 2008-Apr-30 19:55:21 LOG3 vw_send: To DATATAKING: set ra 095203.2 2008-Apr-30 19:55:21 LOG3 vw_send: To DATATAKING: set dec 232432.6 2008-Apr-30 19:55:21 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-30 19:55:21 LOG3 vw_send: To DATATAKING: pnt tr 095203.2 232432.6 -CJ 2008-Apr-30 19:55:21 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-30 19:55:21 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-30 19:55:21 LOG5 finish_task: Level: (3) ID = <10214> Status = 0 0 0 0 ok 2008-Apr-30 19:55:21 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-30 19:55:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 19:55:21 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-30 19:55:21 LOG5 end_task: Level: (3) ID = <10214> Status = 0 0 0 0 ok 2008-Apr-30 19:55:21 START begin_task: Starting task 'waiting on telescope' 2008-Apr-30 19:55:21 LOG5 begin_task: Level: (3) ID = <10215> Status = 0 0 0 0 ok 2008-Apr-30 19:55:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-30 19:55:21 LOG3 waittrk: Start waittrk 5 2008-Apr-30 19:55:21 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-30 19:55:21 LOG5 begin_task: Level: (4) ID = <10216> Status = 0 0 0 0 ok 2008-Apr-30 19:55:21 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631112284.0} 2008-Apr-30 19:55:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 19:55:21 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p1_020" 2008-Apr-30 19:55:21 LOG4 got_cormsg: From DATATAKING: set ra 095203.2 2008-Apr-30 19:55:21 LOG4 got_cormsg: From DATATAKING: set dec 232432.6 2008-Apr-30 19:55:21 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2008-Apr-30 19:55:21 LOG4 got_cormsg: From DATATAKING: 095203.2 2008-Apr-30 19:55:21 LOG4 got_cormsg: From DATATAKING: vw% 232432.6 2008-Apr-30 19:55:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 19:55:21 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-30 19:55:21 LOG4 got_cormsg: From DATATAKING: pnt tr 095203.2 232432.6 -CJ 2008-Apr-30 19:55:21 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-30 19:55:21 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-30 19:55:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 19:55:26 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-30 19:55:26 LOG5 end_task: Level: (4) ID = <10216> Status = 0 0 0 0 ok 2008-Apr-30 19:55:26 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-30 19:55:26 LOG5 begin_task: Level: (4) ID = <10217> Status = 0 0 0 0 ok 2008-Apr-30 19:55:28 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-30 19:55:28 LOG5 end_task: Level: (4) ID = <10217> Status = 0 0 0 0 ok 2008-Apr-30 19:55:28 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-30 19:55:28 INFO2 waittrk: Now tracking AGES3193_p1_020 2008-Apr-30 19:55:28 LOG4 waittrk: Current telescope position: Az = 149.02 ZA = 5.89 2008-Apr-30 19:55:28 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-30 19:55:28 LOG5 finish_task: Level: (3) ID = <10215> Status = 0 0 0 0 ok 2008-Apr-30 19:55:28 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-30 19:55:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 19:55:28 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-30 19:55:28 LOG5 end_task: Level: (3) ID = <10215> Status = 0 0 0 0 ok 2008-Apr-30 19:55:28 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-30 19:55:28 LOG5 begin_task: Level: (3) ID = <10218> Status = 0 0 0 0 ok 2008-Apr-30 19:55:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-30 19:55:28 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-30 19:55:28 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-30 19:55:28 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-30 19:55:28 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 19:55:28 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-30 19:55:28 LOG5 begin_task: Level: (4) ID = <10219> Status = 0 0 0 0 ok 2008-Apr-30 19:55:29 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-30 19:55:29 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 19:55:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 19:55:31 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-30 19:55:31 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-30 19:55:31 LOG5 end_task: Level: (4) ID = <10219> Status = 0 0 0 0 ok 2008-Apr-30 19:55:31 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-30 19:55:31 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-30 19:55:31 LOG5 begin_task: Level: (4) ID = <10220> Status = 0 0 0 0 ok 2008-Apr-30 19:55:31 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-30 19:55:31 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-30 19:55:31 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-30 19:55:31 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-30 19:55:31 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-30 19:55:31 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-30 19:55:31 LOG5 begin_task: Level: (5) ID = <10221> Status = 0 0 0 0 ok 2008-Apr-30 19:55:32 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-30 19:55:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 19:55:32 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 0 dB --- beam 1: 7 6 dB 2008-Apr-30 19:55:32 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 2 2 dB 2008-Apr-30 19:55:32 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 3 dB --- beam 5: 6 5 dB 2008-Apr-30 19:55:32 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 3 dB --- beam 3: 4 3 dB 2008-Apr-30 19:55:32 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-30 19:55:32 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-30 19:55:32 LOG5 end_task: Level: (5) ID = <10221> Status = 0 0 0 0 ok 2008-Apr-30 19:55:32 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.093 0.975 ALFA beam 1: 1.067 1.016 2008-Apr-30 19:55:32 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.962 1.116 ALFA beam 3: 0.913 0.984 2008-Apr-30 19:55:32 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.085 0.898 ALFA beam 5: 0.941 1.094 2008-Apr-30 19:55:32 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.930 0.979 ALFA beam 7: 1.013 1.086 2008-Apr-30 19:55:32 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-30 19:55:32 LOG5 finish_task: Level: (4) ID = <10220> Status = 0 0 0 0 ok 2008-Apr-30 19:55:32 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-30 19:55:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 19:55:32 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-30 19:55:32 LOG5 end_task: Level: (4) ID = <10220> Status = 0 0 0 0 ok 2008-Apr-30 19:55:32 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-30 19:55:32 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-30 19:55:32 LOG5 finish_task: Level: (3) ID = <10218> Status = 0 0 0 0 ok 2008-Apr-30 19:55:32 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-30 19:55:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 19:55:32 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-30 19:55:32 LOG5 end_task: Level: (3) ID = <10218> Status = 0 0 0 0 ok 2008-Apr-30 19:55:32 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 SS 2008-Apr-30 19:55:32 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 SS 2008-Apr-30 19:55:32 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 SS 2008-Apr-30 19:55:32 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 SS 2008-Apr-30 19:55:32 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-30 19:55:32 START begin_task: Starting task 'WAPP calibration' 2008-Apr-30 19:55:32 LOG5 begin_task: Level: (3) ID = <10222> Status = 0 0 0 0 ok 2008-Apr-30 19:55:32 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-30 19:55:32 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-30 19:55:32 START begin_task: Starting task 'selecting calibration type' 2008-Apr-30 19:55:32 LOG5 begin_task: Level: (4) ID = <10223> Status = 0 0 0 0 ok 2008-Apr-30 19:55:32 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-30 19:55:32 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-30 19:55:32 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 19:55:32 START begin_task: Starting task 'waiting on setcal' 2008-Apr-30 19:55:32 LOG5 begin_task: Level: (5) ID = <10224> Status = 0 0 0 0 ok 2008-Apr-30 19:55:32 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 SS' 2008-Apr-30 19:55:33 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-30 19:55:33 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 19:55:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 19:55:33 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-30 19:55:33 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-30 19:55:33 LOG5 end_task: Level: (5) ID = <10224> Status = 0 0 0 0 ok 2008-Apr-30 19:55:33 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-30 19:55:33 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-30 19:55:33 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-30 19:55:33 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-30 19:55:33 LOG5 begin_task: Level: (5) ID = <10225> Status = 0 0 0 0 ok 2008-Apr-30 19:55:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 19:55:33 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-30 19:55:33 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-30 19:55:33 LOG5 end_task: Level: (5) ID = <10225> Status = 0 0 0 0 ok 2008-Apr-30 19:55:33 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-30 19:55:33 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-30 19:55:33 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-30 19:55:33 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-30 19:55:33 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-30 19:55:33 LOG5 begin_task: Level: (5) ID = <10226> Status = 0 0 0 0 ok 2008-Apr-30 19:55:33 NOTE WAPPDATA-new_file: New FITS file: wapp.20080430.a2048.0004.fits 2008-Apr-30 19:55:33 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-30 19:55:33 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-30 19:55:33 LOG5 end_task: Level: (5) ID = <10226> Status = 0 0 0 0 ok 2008-Apr-30 19:55:33 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-30 19:55:33 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-30 19:55:33 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-30 19:55:33 LOG5 finish_task: Level: (4) ID = <10223> Status = 0 0 0 0 ok 2008-Apr-30 19:55:33 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-30 19:55:33 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 19:55:33 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-30 19:55:33 LOG5 end_task: Level: (4) ID = <10223> Status = 0 0 0 0 ok 2008-Apr-30 19:55:33 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-30 19:55:33 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-30 19:55:33 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-30 19:55:33 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-30 19:55:33 LOG5 begin_task: Level: (4) ID = <10227> Status = 0 0 0 0 ok 2008-Apr-30 19:55:33 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080430.a2048.0004.fits} 2008-Apr-30 19:55:33 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-30 19:55:33 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-30 19:55:33 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-30 19:55:33 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-30 19:55:33 LOG5 end_task: Level: (4) ID = <10227> Status = 0 0 0 0 ok 2008-Apr-30 19:55:33 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-30 19:55:33 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-30 19:55:33 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-30 19:55:33 LOG5 begin_task: Level: (4) ID = <10228> Status = 0 0 0 0 ok 2008-Apr-30 19:55:33 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-30 19:55:33 LOG5 log_alfabeam: Parameters: 9.8675555555555547 23.409055555555558 10.094843 2008.3335530268462 47.099991 2008-Apr-30 19:55:33 LOG4 log_alfabeam: ALFABEAM 0 9.867555555555553 23.409055555555561 2008-Apr-30 19:55:33 LOG4 log_alfabeam: ALFABEAM 1 9.869872644916418 23.308625873237297 2008-Apr-30 19:55:33 LOG4 log_alfabeam: ALFABEAM 2 9.874363238387403 23.375260819724566 2008-Apr-30 19:55:33 LOG4 log_alfabeam: ALFABEAM 3 9.872165554879635 23.476231421019225 2008-Apr-30 19:55:33 LOG4 log_alfabeam: ALFABEAM 4 9.865296810482839 23.509868081459064 2008-Apr-30 19:55:33 LOG4 log_alfabeam: ALFABEAM 5 9.860668501690670 23.441351583896491 2008-Apr-30 19:55:33 LOG4 log_alfabeam: ALFABEAM 6 9.863046395079452 23.341093948749389 2008-Apr-30 19:55:33 INFO2 take_spectra: Starting WAPP scan: 812100108 2008-Apr-30 19:55:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-30 19:55:34 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-30 19:55:34 LOG5 begin_task: Level: (5) ID = <10229> Status = 0 0 0 0 ok 2008-Apr-30 19:55:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-30 19:55:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 86135.00 2008-Apr-30 19:55:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.112284 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-30 19:55:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.112284 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 19:55:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.112284 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 19:55:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.112284 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-30 19:55:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.112284 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 19:55:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.112284 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 19:55:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.112284 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 19:55:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.112284 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 19:55:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.112284 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 19:55:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-30 19:55:40 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-30 19:55:40 LOG5 end_task: Level: (5) ID = <10229> Status = 0 0 0 0 ok 2008-Apr-30 19:55:40 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-30 19:55:40 LOG5 end_task: Level: (4) ID = <10228> Status = 0 0 0 0 ok 2008-Apr-30 19:55:40 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-30 19:55:40 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-30 19:55:40 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-30 19:55:40 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-30 19:55:40 LOG5 begin_task: Level: (4) ID = <10230> Status = 0 0 0 0 ok 2008-Apr-30 19:55:40 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-30 19:55:40 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-30 19:55:40 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-30 19:55:40 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-30 19:55:40 LOG5 end_task: Level: (4) ID = <10230> Status = 0 0 0 0 ok 2008-Apr-30 19:55:40 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-30 19:55:40 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-30 19:55:40 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-30 19:55:40 LOG5 begin_task: Level: (4) ID = <10231> Status = 0 0 0 0 ok 2008-Apr-30 19:55:40 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-30 19:55:40 LOG5 log_alfabeam: Parameters: 9.8675555555555547 23.409055555555558 10.096792 2008.3335532486628 47.099991 2008-Apr-30 19:55:40 LOG4 log_alfabeam: ALFABEAM 0 9.867555555555574 23.409055555555561 2008-Apr-30 19:55:40 LOG4 log_alfabeam: ALFABEAM 1 9.869902022749187 23.308755144686476 2008-Apr-30 19:55:40 LOG4 log_alfabeam: ALFABEAM 2 9.874373208034543 23.375641656262566 2008-Apr-30 19:55:40 LOG4 log_alfabeam: ALFABEAM 3 9.872145666751194 23.476488338860928 2008-Apr-30 19:55:40 LOG4 log_alfabeam: ALFABEAM 4 9.865267126249504 23.509741089737094 2008-Apr-30 19:55:40 LOG4 log_alfabeam: ALFABEAM 5 9.860659172392705 23.440969853068534 2008-Apr-30 19:55:40 LOG4 log_alfabeam: ALFABEAM 6 9.863066265850296 23.340844483179875 2008-Apr-30 19:55:40 INFO2 take_spectra: Starting WAPP scan: 812100109 2008-Apr-30 19:55:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-30 19:55:41 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-30 19:55:41 LOG5 begin_task: Level: (5) ID = <10232> Status = 0 0 0 0 ok 2008-Apr-30 19:55:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-30 19:55:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 86142.00 2008-Apr-30 19:55:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.554 > 1.4)! 2008-Apr-30 19:55:46 LOG4 check_wapp_levels: WAPP-1 power levels: 1.548 1.235 1.462 1.394 2008-Apr-30 19:55:46 LOG4 check_wapp_levels: WAPP-2 power levels: 1.319 1.554 1.274 1.358 2008-Apr-30 19:55:46 LOG4 check_wapp_levels: WAPP-3 power levels: 1.526 1.256 1.322 1.476 2008-Apr-30 19:55:46 LOG4 check_wapp_levels: WAPP-4 power levels: 1.327 1.380 1.446 1.532 2008-Apr-30 19:55:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.112284 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-30 19:55:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.112284 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 19:55:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.112284 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 19:55:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.112284 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-30 19:55:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.112284 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 19:55:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.112284 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 19:55:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.112284 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 19:55:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.112284 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 19:55:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.112284 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 19:55:47 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-30 19:55:47 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-30 19:55:47 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-30 19:55:47 LOG5 end_task: Level: (5) ID = <10232> Status = 0 0 0 0 ok 2008-Apr-30 19:55:47 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-30 19:55:47 LOG5 end_task: Level: (4) ID = <10231> Status = 0 0 0 0 ok 2008-Apr-30 19:55:47 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-30 19:55:47 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-30 19:55:47 LOG5 finish_task: Level: (3) ID = <10222> Status = 0 0 0 0 ok 2008-Apr-30 19:55:47 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-30 19:55:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 19:55:47 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-30 19:55:47 LOG5 end_task: Level: (3) ID = <10222> Status = 0 0 0 0 ok 2008-Apr-30 19:55:47 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-30 19:55:47 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 149.37 and ZA = 5.86 2008-Apr-30 19:55:47 LOG3 track_source: Calling 'track_source AGES3193_p1_020 149.37 5.8629157601 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-30 19:55:47 START begin_task: Starting task 'sending tracking commands' 2008-Apr-30 19:55:47 LOG5 begin_task: Level: (3) ID = <10233> Status = 0 0 0 0 ok 2008-Apr-30 19:55:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p1_020} INFO {Slewing to source 'AGES3193_p1_020' ...} 2008-Apr-30 19:55:47 INFO1 track_source: Starting to track AGES3193_p1_020 2008-Apr-30 19:55:47 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p1_020" 2008-Apr-30 19:55:47 LOG3 vw_send: To DATATAKING: set ra 149.37 2008-Apr-30 19:55:47 LOG3 vw_send: To DATATAKING: set dec 5.8629157601 2008-Apr-30 19:55:47 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-30 19:55:47 LOG3 vw_send: To DATATAKING: pnt tr 149.37 5.8629157601 -CF 2008-Apr-30 19:55:47 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-30 19:55:47 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-30 19:55:47 LOG5 finish_task: Level: (3) ID = <10233> Status = 0 0 0 0 ok 2008-Apr-30 19:55:47 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-30 19:55:48 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 19:55:48 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-30 19:55:48 LOG5 end_task: Level: (3) ID = <10233> Status = 0 0 0 0 ok 2008-Apr-30 19:55:48 LOG1 fixed_driftmap: Parameters: HA = +00:13:00.0 Start = 10:06:29.3 LST = 10:05:55.5 diff = 33.8 secs 2008-Apr-30 19:55:48 INFO2 fixed_driftmap: Waiting 31.8 seconds for RA 9:53:29 2008-Apr-30 19:55:48 INFO2 lstwait: Waiting for 31.7 secs from LST 10:05:55 to LST 10:06:27 ... 2008-Apr-30 19:55:48 LOG4 send_obs_status: To obs_status: <1> TASKTIME 31.74990220079161 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-30 19:55:48 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-30 19:55:48 LOG5 begin_task: Level: (3) ID = <10234> Status = 0 0 0 0 ok 2008-Apr-30 19:55:48 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p1_020" 2008-Apr-30 19:55:48 LOG4 got_cormsg: From DATATAKING: set ra 149.37 2008-Apr-30 19:55:48 LOG4 got_cormsg: From DATATAKING: set dec 5.8629157601 2008-Apr-30 19:55:48 LOG4 got_cormsg: From DATATAKING: vw% 149.37 2008-Apr-30 19:55:48 LOG4 got_cormsg: From DATATAKING: vw% 5.8629157601 2008-Apr-30 19:55:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 19:55:48 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-30 19:55:48 LOG4 got_cormsg: From DATATAKING: pnt tr 149.37 5.8629157601 -CF 2008-Apr-30 19:55:48 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-30 19:55:48 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-30 19:55:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 19:55:52 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.895 and 1.117 2008-Apr-30 19:56:19 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-30 19:56:19 LOG5 end_task: Level: (3) ID = <10234> Status = 0 0 0 0 ok 2008-Apr-30 19:56:19 LOG4 lstwait: Finished waiting, the gui caused difference: 0.24997051999520181 2008-Apr-30 19:56:19 INFO3 lstwait: Finished waiting 2008-Apr-30 19:56:19 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-30 19:56:19 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-30 19:56:19 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-30 19:56:19 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-30 19:56:20 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-30 19:56:20 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-30 19:56:20 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-30 19:56:20 LOG5 begin_task: Level: (3) ID = <10235> Status = 0 0 0 0 ok 2008-Apr-30 19:56:20 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-30 19:56:20 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-30 19:56:20 INFO2 take_spectra: Starting WAPP scan: 812100110 2008-Apr-30 19:56:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-30 19:56:20 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-30 19:56:20 LOG5 begin_task: Level: (4) ID = <10236> Status = 0 0 0 0 ok 2008-Apr-30 19:56:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-30 19:56:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 86181.00 2008-Apr-30 19:56:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.112284 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-30 19:56:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.112284 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 19:56:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.112284 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 19:56:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.112284 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-30 19:56:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.112284 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 19:56:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.112284 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 19:56:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.112284 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 19:56:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.112284 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 19:56:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.112284 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 19:58:56 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 19:58:56.302 (seconds: 71936.302)!} 2008-Apr-30 19:58:56 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 19:58:56.302 (seconds: 71936.302)! 2008-Apr-30 19:58:57 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 71935.0 to 71936.0! 2008-Apr-30 19:58:58 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (71935.0 - 71937.0)! 2008-Apr-30 20:16:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-30 20:16:21 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-30 20:16:21 LOG5 end_task: Level: (4) ID = <10236> Status = 0 0 0 0 ok 2008-Apr-30 20:16:21 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-30 20:16:21 LOG5 end_task: Level: (3) ID = <10235> Status = 0 0 0 0 ok 2008-Apr-30 20:16:21 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-30 20:16:21 LOG5 finish_task: Level: (2) ID = <10202> Status = 0 0 0 0 ok 2008-Apr-30 20:16:21 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-30 20:16:21 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-30 20:16:21 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-30 20:16:21 LOG5 end_task: Level: (2) ID = <10202> Status = 0 0 0 0 ok 2008-Apr-30 20:16:21 COMMAND run_command_line: EXECUTING command 23: 'FIXEDDRIFT az=122.10 alfaangle=76.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p1_022 ra=95300.00 dec=232130.00' 2008-Apr-30 20:16:21 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-30 20:16:22 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-30 20:16:22 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 122.10 76.4 hcorcal 5 tracking no first 1 AGES3193_p1_022 95300.00 232130.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-30 20:16:22 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-30 20:16:22 LOG5 begin_task: Level: (2) ID = <10237> Status = 0 0 0 0 ok 2008-Apr-30 20:16:22 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES3193_p1_020' 2008-Apr-30 20:16:22 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-30 20:16:22 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p1_022} 2008-Apr-30 20:16:22 INFO3 fixed_driftmap: Sending telescope to Az = 122.10 and ZA = 9.76 2008-Apr-30 20:16:22 LOG3 track_source: Calling 'track_source AGES3193_p1_022 122.10 9.7642971036 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-30 20:16:22 START begin_task: Starting task 'sending tracking commands' 2008-Apr-30 20:16:22 LOG5 begin_task: Level: (3) ID = <10238> Status = 0 0 0 0 ok 2008-Apr-30 20:16:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p1_022} INFO {Slewing to source 'AGES3193_p1_022' ...} 2008-Apr-30 20:16:22 INFO1 track_source: Starting to track AGES3193_p1_022 2008-Apr-30 20:16:22 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p1_022" 2008-Apr-30 20:16:22 LOG3 vw_send: To DATATAKING: set ra 122.10 2008-Apr-30 20:16:22 LOG3 vw_send: To DATATAKING: set dec 9.7642971036 2008-Apr-30 20:16:22 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-30 20:16:22 LOG3 vw_send: To DATATAKING: pnt tr 122.10 9.7642971036 -CF 2008-Apr-30 20:16:22 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-30 20:16:22 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-30 20:16:22 LOG5 finish_task: Level: (3) ID = <10238> Status = 0 0 0 0 ok 2008-Apr-30 20:16:22 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-30 20:16:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 20:16:22 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-30 20:16:22 LOG5 end_task: Level: (3) ID = <10238> Status = 0 0 0 0 ok 2008-Apr-30 20:16:22 START begin_task: Starting task 'rotate ALFA to +76.4 degrees' 2008-Apr-30 20:16:22 LOG5 begin_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2008-Apr-30 20:16:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +76.4 degrees ...} 2008-Apr-30 20:16:22 INFO2 rotate_alfa: ALFA commanded to +76.4 degrees 2008-Apr-30 20:16:22 LOG3 sock_errsend: To ALFAMOTOR: POSITION 76.4 REPLY 2008-Apr-30 20:16:22 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-30 20:16:22 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-30 20:16:22 LOG5 begin_task: Level: (4) ID = <10240> Status = 0 0 0 0 ok 2008-Apr-30 20:16:22 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p1_022" 2008-Apr-30 20:16:22 LOG4 got_cormsg: From DATATAKING: set ra 122.10 2008-Apr-30 20:16:22 LOG4 got_cormsg: From DATATAKING: set dec 9.7642971036 2008-Apr-30 20:16:22 LOG4 got_cormsg: From DATATAKING: vw% 122.10 2008-Apr-30 20:16:22 LOG4 got_cormsg: From DATATAKING: vw% 9.7642971036 2008-Apr-30 20:16:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 20:16:22 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-30 20:16:22 LOG4 got_cormsg: From DATATAKING: pnt tr 122.10 9.7642971036 -CF 2008-Apr-30 20:16:22 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-30 20:16:22 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-30 20:16:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 20:16:40 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-30 20:16:40 INFO3 alfa_motor: ALFA rotator in-position +76.40 degrees 2008-Apr-30 20:16:40 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-30 20:16:40 LOG5 end_task: Level: (4) ID = <10240> Status = 0 0 0 0 ok 2008-Apr-30 20:16:40 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-30 20:16:40 STOP finish_task: Finishing task 'rotate ALFA to +76.4 degrees' 2008-Apr-30 20:16:40 LOG5 finish_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2008-Apr-30 20:16:40 INFO2 finish_task: DONE finished configuration: rotating ALFA to +76.4 degrees 2008-Apr-30 20:16:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 20:16:40 STOP end_task: Finishing task 'rotate ALFA to +76.4 degrees' with status 'OK' 2008-Apr-30 20:16:40 LOG5 end_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2008-Apr-30 20:16:40 START begin_task: Starting task 'waiting on telescope' 2008-Apr-30 20:16:40 LOG5 begin_task: Level: (3) ID = <10241> Status = 0 0 0 0 ok 2008-Apr-30 20:16:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-30 20:16:40 LOG3 waittrk: Start waittrk 5 2008-Apr-30 20:16:40 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-30 20:16:40 LOG5 begin_task: Level: (4) ID = <10242> Status = 0 0 0 0 ok 2008-Apr-30 20:16:45 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-30 20:16:45 LOG5 end_task: Level: (4) ID = <10242> Status = 0 0 0 0 ok 2008-Apr-30 20:16:45 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-30 20:16:45 LOG5 begin_task: Level: (4) ID = <10243> Status = 0 0 0 0 ok 2008-Apr-30 20:18:06 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-30 20:18:06 LOG5 end_task: Level: (4) ID = <10243> Status = 0 0 0 0 ok 2008-Apr-30 20:18:06 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-30 20:18:06 INFO2 waittrk: Now tracking AGES3193_p1_022 2008-Apr-30 20:18:06 LOG4 waittrk: Current telescope position: Az = 121.90 ZA = 9.77 2008-Apr-30 20:18:06 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-30 20:18:06 LOG5 finish_task: Level: (3) ID = <10241> Status = 0 0 0 0 ok 2008-Apr-30 20:18:06 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-30 20:18:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 20:18:06 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-30 20:18:06 LOG5 end_task: Level: (3) ID = <10241> Status = 0 0 0 0 ok 2008-Apr-30 20:18:06 START begin_task: Starting task 'selecting calibration type' 2008-Apr-30 20:18:06 LOG5 begin_task: Level: (3) ID = <10244> Status = 0 0 0 0 ok 2008-Apr-30 20:18:06 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-30 20:18:06 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-30 20:18:06 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 20:18:06 START begin_task: Starting task 'waiting on setcal' 2008-Apr-30 20:18:06 LOG5 begin_task: Level: (4) ID = <10245> Status = 0 0 0 0 ok 2008-Apr-30 20:18:06 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-30 20:18:06 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 20:18:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 20:18:07 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-30 20:18:07 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-30 20:18:07 LOG5 end_task: Level: (4) ID = <10245> Status = 0 0 0 0 ok 2008-Apr-30 20:18:07 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-30 20:18:07 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-30 20:18:07 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-30 20:18:07 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-30 20:18:07 LOG5 begin_task: Level: (4) ID = <10246> Status = 0 0 0 0 ok 2008-Apr-30 20:18:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 20:18:07 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-30 20:18:07 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-30 20:18:07 LOG5 end_task: Level: (4) ID = <10246> Status = 0 0 0 0 ok 2008-Apr-30 20:18:07 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-30 20:18:07 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-30 20:18:07 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-30 20:18:07 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-30 20:18:07 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-30 20:18:07 LOG5 begin_task: Level: (4) ID = <10247> Status = 0 0 0 0 ok 2008-Apr-30 20:18:07 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-30 20:18:07 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-30 20:18:07 LOG5 end_task: Level: (4) ID = <10247> Status = 0 0 0 0 ok 2008-Apr-30 20:18:07 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-30 20:18:07 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-30 20:18:07 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-30 20:18:07 LOG5 finish_task: Level: (3) ID = <10244> Status = 0 0 0 0 ok 2008-Apr-30 20:18:07 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-30 20:18:07 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 20:18:07 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-30 20:18:07 LOG5 end_task: Level: (3) ID = <10244> Status = 0 0 0 0 ok 2008-Apr-30 20:18:07 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2008-Apr-30 20:18:07 INFO2 astwait: Waiting for 10 seconds from 00:18:07 to 00:18:17 UTC ... 2008-Apr-30 20:18:07 LOG4 send_obs_status: To obs_status: <1> TASKTIME 10 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-30 20:18:07 START begin_task: Starting task 'waiting on waiting for AST time' 2008-Apr-30 20:18:07 LOG5 begin_task: Level: (3) ID = <10248> Status = 0 0 0 0 ok 2008-Apr-30 20:18:17 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2008-Apr-30 20:18:17 LOG5 end_task: Level: (3) ID = <10248> Status = 0 0 0 0 ok 2008-Apr-30 20:18:17 INFO3 astwait: Finished waiting 2008-Apr-30 20:18:17 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-30 20:18:17 LOG5 dopset_later: Calling 'dopset_later 61.130658428280668' 2008-Apr-30 20:18:17 INFO3 dopset_later: Setting Doppler correction for 20:19:17 (61.1 seconds from now) 2008-Apr-30 20:18:17 LOG5 antvel: Calling 'antvel 122.100000 9.764297 F 61.130658428280668' 2008-Apr-30 20:18:17 LOG2 antvel: Parameters to Doppler: Heliocentric 87557 2008 121 0.0 2008-Apr-30 20:18:17 INFO5 antvel: Computed antenna velocity: +28.51130 km/s 2008-Apr-30 20:18:17 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=28.5112979968 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-30 20:18:17 INFO4 dopset_gen: New sky frequencies: 1381.112080 1381.112080 1381.112080 1381.112080 1381.112080 1381.112080 1381.112080 1381.112080 1381.112080 2008-Apr-30 20:18:17 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.112080 sky0=1381.112080 sky1=1381.112080 sky2=1381.112080 sky3=1381.112080 sky4=1381.112080 sky5=1381.112080 sky6=1381.112080 sky7=1381.112080 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-30 20:18:17 LOG2 dopset_gen: Result from 'sky2syn': 1631.112080 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-30 20:18:17 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631112080.0} 2008-Apr-30 20:18:17 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 20:18:17 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-30 20:18:17 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-30 20:18:17 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:02.8 Dec = +23:21:32.5 2008-Apr-30 20:18:17 LOG3 track_source: Calling 'track_source AGES3193_p1_022 095202.8 232132.5 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-30 20:18:17 START begin_task: Starting task 'sending tracking commands' 2008-Apr-30 20:18:17 LOG5 begin_task: Level: (3) ID = <10249> Status = 0 0 0 0 ok 2008-Apr-30 20:18:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p1_022} INFO {Slewing to source 'AGES3193_p1_022' ...} 2008-Apr-30 20:18:17 INFO1 track_source: Starting to track AGES3193_p1_022 2008-Apr-30 20:18:17 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p1_022" 2008-Apr-30 20:18:17 LOG3 vw_send: To DATATAKING: set ra 095202.8 2008-Apr-30 20:18:17 LOG3 vw_send: To DATATAKING: set dec 232132.5 2008-Apr-30 20:18:17 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-30 20:18:17 LOG3 vw_send: To DATATAKING: pnt tr 095202.8 232132.5 -CJ 2008-Apr-30 20:18:17 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-30 20:18:17 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-30 20:18:17 LOG5 finish_task: Level: (3) ID = <10249> Status = 0 0 0 0 ok 2008-Apr-30 20:18:17 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-30 20:18:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 20:18:17 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-30 20:18:17 LOG5 end_task: Level: (3) ID = <10249> Status = 0 0 0 0 ok 2008-Apr-30 20:18:17 START begin_task: Starting task 'waiting on telescope' 2008-Apr-30 20:18:17 LOG5 begin_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2008-Apr-30 20:18:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-30 20:18:17 LOG3 waittrk: Start waittrk 5 2008-Apr-30 20:18:17 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-30 20:18:17 LOG5 begin_task: Level: (4) ID = <10251> Status = 0 0 0 0 ok 2008-Apr-30 20:18:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631112080.0} 2008-Apr-30 20:18:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 20:18:17 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p1_022" 2008-Apr-30 20:18:17 LOG4 got_cormsg: From DATATAKING: set ra 095202.8 2008-Apr-30 20:18:17 LOG4 got_cormsg: From DATATAKING: set dec 232132.5 2008-Apr-30 20:18:17 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-30 20:18:17 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-30 20:18:17 LOG4 got_cormsg: From DATATAKING: pnt tr 095202.8 232132.5 -CJ 2008-Apr-30 20:18:17 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-30 20:18:17 LOG4 got_cormsg: From DATATAKING: vw% 095202.8 2008-Apr-30 20:18:17 LOG4 got_cormsg: From DATATAKING: vw% 232132.5 2008-Apr-30 20:18:17 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2008-Apr-30 20:18:22 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-30 20:18:22 LOG5 end_task: Level: (4) ID = <10251> Status = 0 0 0 0 ok 2008-Apr-30 20:18:22 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-30 20:18:22 LOG5 begin_task: Level: (4) ID = <10252> Status = 0 0 0 0 ok 2008-Apr-30 20:18:24 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-30 20:18:24 LOG5 end_task: Level: (4) ID = <10252> Status = 0 0 0 0 ok 2008-Apr-30 20:18:24 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-30 20:18:24 INFO2 waittrk: Now tracking AGES3193_p1_022 2008-Apr-30 20:18:24 LOG4 waittrk: Current telescope position: Az = 121.85 ZA = 9.79 2008-Apr-30 20:18:24 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-30 20:18:24 LOG5 finish_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2008-Apr-30 20:18:24 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-30 20:18:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 20:18:24 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-30 20:18:24 LOG5 end_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2008-Apr-30 20:18:24 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-30 20:18:24 LOG5 begin_task: Level: (3) ID = <10253> Status = 0 0 0 0 ok 2008-Apr-30 20:18:24 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-30 20:18:24 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-30 20:18:24 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-30 20:18:24 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-30 20:18:24 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 20:18:24 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-30 20:18:24 LOG5 begin_task: Level: (4) ID = <10254> Status = 0 0 0 0 ok 2008-Apr-30 20:18:24 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-30 20:18:24 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 20:18:27 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 20:18:27 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-30 20:18:27 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-30 20:18:27 LOG5 end_task: Level: (4) ID = <10254> Status = 0 0 0 0 ok 2008-Apr-30 20:18:27 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-30 20:18:27 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-30 20:18:27 LOG5 begin_task: Level: (4) ID = <10255> Status = 0 0 0 0 ok 2008-Apr-30 20:18:27 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-30 20:18:27 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-30 20:18:27 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-30 20:18:27 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-30 20:18:27 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-30 20:18:27 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-30 20:18:27 LOG5 begin_task: Level: (5) ID = <10256> Status = 0 0 0 0 ok 2008-Apr-30 20:18:27 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-30 20:18:27 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 20:18:28 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 1 dB --- beam 1: 7 6 dB 2008-Apr-30 20:18:28 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-30 20:18:28 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 2 2 dB 2008-Apr-30 20:18:28 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 3 dB --- beam 5: 6 5 dB 2008-Apr-30 20:18:28 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-30 20:18:28 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-30 20:18:28 LOG5 end_task: Level: (5) ID = <10256> Status = 0 0 0 0 ok 2008-Apr-30 20:18:28 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.879 0.929 ALFA beam 1: 1.096 1.042 2008-Apr-30 20:18:28 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.024 0.903 ALFA beam 3: 0.955 0.998 2008-Apr-30 20:18:28 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.102 0.894 ALFA beam 5: 0.953 1.116 2008-Apr-30 20:18:28 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.943 0.991 ALFA beam 7: 1.024 1.100 2008-Apr-30 20:18:28 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-30 20:18:28 LOG5 finish_task: Level: (4) ID = <10255> Status = 0 0 0 0 ok 2008-Apr-30 20:18:28 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-30 20:18:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 20:18:28 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-30 20:18:28 LOG5 end_task: Level: (4) ID = <10255> Status = 0 0 0 0 ok 2008-Apr-30 20:18:28 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-30 20:18:28 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-30 20:18:28 LOG5 finish_task: Level: (3) ID = <10253> Status = 0 0 0 0 ok 2008-Apr-30 20:18:28 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-30 20:18:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 20:18:28 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-30 20:18:28 LOG5 end_task: Level: (3) ID = <10253> Status = 0 0 0 0 ok 2008-Apr-30 20:18:28 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 SS 2008-Apr-30 20:18:28 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 SS 2008-Apr-30 20:18:28 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 SS 2008-Apr-30 20:18:28 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 SS 2008-Apr-30 20:18:28 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-30 20:18:28 START begin_task: Starting task 'WAPP calibration' 2008-Apr-30 20:18:28 LOG5 begin_task: Level: (3) ID = <10257> Status = 0 0 0 0 ok 2008-Apr-30 20:18:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-30 20:18:28 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-30 20:18:28 START begin_task: Starting task 'selecting calibration type' 2008-Apr-30 20:18:28 LOG5 begin_task: Level: (4) ID = <10258> Status = 0 0 0 0 ok 2008-Apr-30 20:18:28 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-30 20:18:28 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-30 20:18:28 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 20:18:28 START begin_task: Starting task 'waiting on setcal' 2008-Apr-30 20:18:28 LOG5 begin_task: Level: (5) ID = <10259> Status = 0 0 0 0 ok 2008-Apr-30 20:18:28 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 SS' 2008-Apr-30 20:18:28 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-30 20:18:28 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 20:18:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 20:18:29 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-30 20:18:29 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-30 20:18:29 LOG5 end_task: Level: (5) ID = <10259> Status = 0 0 0 0 ok 2008-Apr-30 20:18:29 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-30 20:18:29 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-30 20:18:29 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-30 20:18:29 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-30 20:18:29 LOG5 begin_task: Level: (5) ID = <10260> Status = 0 0 0 0 ok 2008-Apr-30 20:18:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 20:18:29 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-30 20:18:29 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-30 20:18:29 LOG5 end_task: Level: (5) ID = <10260> Status = 0 0 0 0 ok 2008-Apr-30 20:18:29 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-30 20:18:29 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-30 20:18:29 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-30 20:18:29 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-30 20:18:29 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-30 20:18:29 LOG5 begin_task: Level: (5) ID = <10261> Status = 0 0 0 0 ok 2008-Apr-30 20:18:29 NOTE WAPPDATA-new_file: New FITS file: wapp.20080430.a2048.0005.fits 2008-Apr-30 20:18:29 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-30 20:18:29 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-30 20:18:29 LOG5 end_task: Level: (5) ID = <10261> Status = 0 0 0 0 ok 2008-Apr-30 20:18:29 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-30 20:18:29 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-30 20:18:29 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-30 20:18:29 LOG5 finish_task: Level: (4) ID = <10258> Status = 0 0 0 0 ok 2008-Apr-30 20:18:29 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-30 20:18:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 20:18:29 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-30 20:18:29 LOG5 end_task: Level: (4) ID = <10258> Status = 0 0 0 0 ok 2008-Apr-30 20:18:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-30 20:18:29 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-30 20:18:29 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-30 20:18:29 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-30 20:18:29 LOG5 begin_task: Level: (4) ID = <10262> Status = 0 0 0 0 ok 2008-Apr-30 20:18:29 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080430.a2048.0005.fits} 2008-Apr-30 20:18:29 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-30 20:18:29 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-30 20:18:29 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-30 20:18:29 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-30 20:18:29 LOG5 end_task: Level: (4) ID = <10262> Status = 0 0 0 0 ok 2008-Apr-30 20:18:29 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-30 20:18:29 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-30 20:18:29 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-30 20:18:29 LOG5 begin_task: Level: (4) ID = <10263> Status = 0 0 0 0 ok 2008-Apr-30 20:18:29 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-30 20:18:29 LOG5 log_alfabeam: Parameters: 9.8674444444444465 23.359027777777779 10.478111 2008.3335966296552 76.399902 2008-Apr-30 20:18:29 LOG4 log_alfabeam: ALFABEAM 0 9.867444444444448 23.359027777777779 2008-Apr-30 20:18:29 LOG4 log_alfabeam: ALFABEAM 1 9.869846593192868 23.265941188317573 2008-Apr-30 20:18:29 LOG4 log_alfabeam: ALFABEAM 2 9.874788281354720 23.327776806565588 2008-Apr-30 20:18:29 LOG4 log_alfabeam: ALFABEAM 3 9.872441408989276 23.420993567299586 2008-Apr-30 20:18:29 LOG4 log_alfabeam: ALFABEAM 4 9.865101515657409 23.452756379746887 2008-Apr-30 20:18:29 LOG4 log_alfabeam: ALFABEAM 5 9.860084416997324 23.389784098974133 2008-Apr-30 20:18:29 LOG4 log_alfabeam: ALFABEAM 6 9.862483005872559 23.296184881286937 2008-Apr-30 20:18:29 INFO2 take_spectra: Starting WAPP scan: 812100111 2008-Apr-30 20:18:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-30 20:18:30 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-30 20:18:30 LOG5 begin_task: Level: (5) ID = <10264> Status = 0 0 0 0 ok 2008-Apr-30 20:18:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-30 20:18:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1111.00 2008-Apr-30 20:18:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.112080 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-30 20:18:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.112080 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 20:18:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.112080 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 20:18:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.112080 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-30 20:18:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.112080 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 20:18:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.112080 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 20:18:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.112080 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 20:18:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.112080 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 20:18:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.112080 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 20:18:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-30 20:18:36 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-30 20:18:36 LOG5 end_task: Level: (5) ID = <10264> Status = 0 0 0 0 ok 2008-Apr-30 20:18:36 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-30 20:18:36 LOG5 end_task: Level: (4) ID = <10263> Status = 0 0 0 0 ok 2008-Apr-30 20:18:36 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-30 20:18:36 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-30 20:18:36 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-30 20:18:36 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-30 20:18:36 LOG5 begin_task: Level: (4) ID = <10265> Status = 0 0 0 0 ok 2008-Apr-30 20:18:36 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-30 20:18:36 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-30 20:18:36 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-30 20:18:36 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-30 20:18:36 LOG5 end_task: Level: (4) ID = <10265> Status = 0 0 0 0 ok 2008-Apr-30 20:18:36 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-30 20:18:36 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-30 20:18:36 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-30 20:18:36 LOG5 begin_task: Level: (4) ID = <10266> Status = 0 0 0 0 ok 2008-Apr-30 20:18:36 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-30 20:18:36 LOG5 log_alfabeam: Parameters: 9.8674444444444465 23.359027777777779 10.480061 2008.3335968514716 76.399902 2008-Apr-30 20:18:36 LOG4 log_alfabeam: ALFABEAM 0 9.867444444444450 23.359027777777793 2008-Apr-30 20:18:36 LOG4 log_alfabeam: ALFABEAM 1 9.869856681866594 23.265990277677211 2008-Apr-30 20:18:36 LOG4 log_alfabeam: ALFABEAM 2 9.874791707704849 23.327929558264007 2008-Apr-30 20:18:36 LOG4 log_alfabeam: ALFABEAM 3 9.872434592236797 23.421098093639447 2008-Apr-30 20:18:36 LOG4 log_alfabeam: ALFABEAM 4 9.865091190421824 23.452706923820283 2008-Apr-30 20:18:36 LOG4 log_alfabeam: ALFABEAM 5 9.860081082683726 23.389632033853800 2008-Apr-30 20:18:36 LOG4 log_alfabeam: ALFABEAM 6 9.862489840233001 23.296083149179790 2008-Apr-30 20:18:36 INFO2 take_spectra: Starting WAPP scan: 812100112 2008-Apr-30 20:18:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-30 20:18:37 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-30 20:18:37 LOG5 begin_task: Level: (5) ID = <10267> Status = 0 0 0 0 ok 2008-Apr-30 20:18:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-30 20:18:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1118.00 2008-Apr-30 20:18:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.551 > 1.4)! 2008-Apr-30 20:18:42 LOG4 check_wapp_levels: WAPP-1 power levels: 1.239 1.187 1.492 1.417 2008-Apr-30 20:18:42 LOG4 check_wapp_levels: WAPP-2 power levels: 1.389 1.280 1.320 1.376 2008-Apr-30 20:18:42 LOG4 check_wapp_levels: WAPP-3 power levels: 1.551 1.252 1.338 1.499 2008-Apr-30 20:18:42 LOG4 check_wapp_levels: WAPP-4 power levels: 1.345 1.392 1.461 1.542 2008-Apr-30 20:18:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.112080 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-30 20:18:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.112080 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 20:18:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.112080 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 20:18:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.112080 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-30 20:18:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.112080 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 20:18:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.112080 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 20:18:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.112080 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 20:18:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.112080 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 20:18:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.112080 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 20:18:43 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-30 20:18:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-30 20:18:43 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-30 20:18:43 LOG5 end_task: Level: (5) ID = <10267> Status = 0 0 0 0 ok 2008-Apr-30 20:18:43 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-30 20:18:43 LOG5 end_task: Level: (4) ID = <10266> Status = 0 0 0 0 ok 2008-Apr-30 20:18:43 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-30 20:18:43 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-30 20:18:43 LOG5 finish_task: Level: (3) ID = <10257> Status = 0 0 0 0 ok 2008-Apr-30 20:18:43 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-30 20:18:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 20:18:43 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-30 20:18:43 LOG5 end_task: Level: (3) ID = <10257> Status = 0 0 0 0 ok 2008-Apr-30 20:18:43 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-30 20:18:43 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 122.10 and ZA = 9.76 2008-Apr-30 20:18:43 LOG3 track_source: Calling 'track_source AGES3193_p1_022 122.10 9.7642971036 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-30 20:18:43 START begin_task: Starting task 'sending tracking commands' 2008-Apr-30 20:18:43 LOG5 begin_task: Level: (3) ID = <10268> Status = 0 0 0 0 ok 2008-Apr-30 20:18:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p1_022} INFO {Slewing to source 'AGES3193_p1_022' ...} 2008-Apr-30 20:18:43 INFO1 track_source: Starting to track AGES3193_p1_022 2008-Apr-30 20:18:43 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p1_022" 2008-Apr-30 20:18:43 LOG3 vw_send: To DATATAKING: set ra 122.10 2008-Apr-30 20:18:43 LOG3 vw_send: To DATATAKING: set dec 9.7642971036 2008-Apr-30 20:18:43 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-30 20:18:43 LOG3 vw_send: To DATATAKING: pnt tr 122.10 9.7642971036 -CF 2008-Apr-30 20:18:43 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-30 20:18:43 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-30 20:18:43 LOG5 finish_task: Level: (3) ID = <10268> Status = 0 0 0 0 ok 2008-Apr-30 20:18:43 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-30 20:18:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 20:18:44 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-30 20:18:44 LOG5 end_task: Level: (3) ID = <10268> Status = 0 0 0 0 ok 2008-Apr-30 20:18:44 LOG1 fixed_driftmap: Parameters: HA = +00:36:00.2 Start = 10:29:29.5 LST = 10:28:55.2 diff = 34.2 secs 2008-Apr-30 20:18:44 INFO2 fixed_driftmap: Waiting 32.2 seconds for RA 9:53:29 2008-Apr-30 20:18:44 INFO2 lstwait: Waiting for 32.1 secs from LST 10:28:55 to LST 10:29:27 ... 2008-Apr-30 20:18:44 LOG4 send_obs_status: To obs_status: <1> TASKTIME 32.134446446518368 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-30 20:18:44 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-30 20:18:44 LOG5 begin_task: Level: (3) ID = <10269> Status = 0 0 0 0 ok 2008-Apr-30 20:18:44 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p1_022" 2008-Apr-30 20:18:44 LOG4 got_cormsg: From DATATAKING: set ra 122.10 2008-Apr-30 20:18:44 LOG4 got_cormsg: From DATATAKING: set dec 9.7642971036 2008-Apr-30 20:18:44 LOG4 got_cormsg: From DATATAKING: vw% 122.10 2008-Apr-30 20:18:44 LOG4 got_cormsg: From DATATAKING: vw% 9.7642971036 2008-Apr-30 20:18:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 20:18:44 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-30 20:18:44 LOG4 got_cormsg: From DATATAKING: pnt tr 122.10 9.7642971036 -CF 2008-Apr-30 20:18:44 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-30 20:18:44 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-30 20:18:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 20:18:48 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.893 and 1.117 2008-Apr-30 20:19:16 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-30 20:19:16 LOG5 end_task: Level: (3) ID = <10269> Status = 0 0 0 0 ok 2008-Apr-30 20:19:16 LOG4 lstwait: Finished waiting, the gui caused difference: -0.13562655999876938 2008-Apr-30 20:19:16 INFO3 lstwait: Finished waiting 2008-Apr-30 20:19:16 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-30 20:19:16 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-30 20:19:16 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-30 20:19:16 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-30 20:19:16 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-30 20:19:16 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-30 20:19:16 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-30 20:19:16 LOG5 begin_task: Level: (3) ID = <10270> Status = 0 0 0 0 ok 2008-Apr-30 20:19:16 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-30 20:19:16 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-30 20:19:16 INFO2 take_spectra: Starting WAPP scan: 812100113 2008-Apr-30 20:19:16 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-30 20:19:16 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-30 20:19:16 LOG5 begin_task: Level: (4) ID = <10271> Status = 0 0 0 0 ok 2008-Apr-30 20:19:16 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-30 20:19:16 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1157.00 2008-Apr-30 20:19:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.112080 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-30 20:19:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.112080 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 20:19:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.112080 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 20:19:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.112080 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-30 20:19:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.112080 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 20:19:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.112080 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 20:19:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.112080 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 20:19:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.112080 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 20:19:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.112080 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 20:28:54 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 20:28:54.323 (seconds: 73734.323)!} 2008-Apr-30 20:28:54 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 20:28:54.323 (seconds: 73734.323)! 2008-Apr-30 20:28:55 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 73733.0 to 73734.0! 2008-Apr-30 20:28:56 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (73733.0 - 73735.0)! 2008-Apr-30 20:39:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-30 20:39:17 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-30 20:39:17 LOG5 end_task: Level: (4) ID = <10271> Status = 0 0 0 0 ok 2008-Apr-30 20:39:17 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-30 20:39:17 LOG5 end_task: Level: (3) ID = <10270> Status = 0 0 0 0 ok 2008-Apr-30 20:39:17 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-30 20:39:17 LOG5 finish_task: Level: (2) ID = <10237> Status = 0 0 0 0 ok 2008-Apr-30 20:39:17 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-30 20:39:17 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-30 20:39:17 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-30 20:39:17 LOG5 end_task: Level: (2) ID = <10237> Status = 0 0 0 0 ok 2008-Apr-30 20:39:17 COMMAND run_command_line: EXECUTING command 27: 'FIXEDDRIFT az=112.15 alfaangle=-90.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p1_024 ra=95300.00 dec=231830.00' 2008-Apr-30 20:39:17 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-30 20:39:18 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-30 20:39:18 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 112.15 -90.4 hcorcal 5 tracking no first 1 AGES3193_p1_024 95300.00 231830.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-30 20:39:18 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-30 20:39:18 LOG5 begin_task: Level: (2) ID = <10272> Status = 0 0 0 0 ok 2008-Apr-30 20:39:18 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES3193_p1_022' 2008-Apr-30 20:39:18 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-30 20:39:18 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p1_024} 2008-Apr-30 20:39:18 INFO3 fixed_driftmap: Sending telescope to Az = 112.15 and ZA = 14.63 2008-Apr-30 20:39:18 LOG3 track_source: Calling 'track_source AGES3193_p1_024 112.15 14.6298968808 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-30 20:39:18 START begin_task: Starting task 'sending tracking commands' 2008-Apr-30 20:39:18 LOG5 begin_task: Level: (3) ID = <10273> Status = 0 0 0 0 ok 2008-Apr-30 20:39:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p1_024} INFO {Slewing to source 'AGES3193_p1_024' ...} 2008-Apr-30 20:39:18 INFO1 track_source: Starting to track AGES3193_p1_024 2008-Apr-30 20:39:18 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p1_024" 2008-Apr-30 20:39:18 LOG3 vw_send: To DATATAKING: set ra 112.15 2008-Apr-30 20:39:18 LOG3 vw_send: To DATATAKING: set dec 14.6298968808 2008-Apr-30 20:39:18 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-30 20:39:18 LOG3 vw_send: To DATATAKING: pnt tr 112.15 14.6298968808 -CF 2008-Apr-30 20:39:18 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-30 20:39:18 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-30 20:39:18 LOG5 finish_task: Level: (3) ID = <10273> Status = 0 0 0 0 ok 2008-Apr-30 20:39:18 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-30 20:39:18 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 20:39:18 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-30 20:39:18 LOG5 end_task: Level: (3) ID = <10273> Status = 0 0 0 0 ok 2008-Apr-30 20:39:18 START begin_task: Starting task 'rotate ALFA to -90.4 degrees' 2008-Apr-30 20:39:18 LOG5 begin_task: Level: (3) ID = <10274> Status = 0 0 0 0 ok 2008-Apr-30 20:39:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -90.4 degrees ...} 2008-Apr-30 20:39:18 INFO2 rotate_alfa: ALFA commanded to -90.4 degrees 2008-Apr-30 20:39:18 LOG3 sock_errsend: To ALFAMOTOR: POSITION -90.4 REPLY 2008-Apr-30 20:39:18 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-30 20:39:18 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-30 20:39:18 LOG5 begin_task: Level: (4) ID = <10275> Status = 0 0 0 0 ok 2008-Apr-30 20:39:18 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p1_024" 2008-Apr-30 20:39:18 LOG4 got_cormsg: From DATATAKING: set ra 112.15 2008-Apr-30 20:39:18 LOG4 got_cormsg: From DATATAKING: set dec 14.6298968808 2008-Apr-30 20:39:18 LOG4 got_cormsg: From DATATAKING: vw% 112.15 2008-Apr-30 20:39:18 LOG4 got_cormsg: From DATATAKING: vw% 14.6298968808 2008-Apr-30 20:39:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 20:39:18 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-30 20:39:18 LOG4 got_cormsg: From DATATAKING: pnt tr 112.15 14.6298968808 -CF 2008-Apr-30 20:39:18 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-30 20:39:18 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-30 20:39:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 20:40:51 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-30 20:40:51 INFO3 alfa_motor: ALFA rotator in-position -90.40 degrees 2008-Apr-30 20:40:51 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-30 20:40:51 LOG5 end_task: Level: (4) ID = <10275> Status = 0 0 0 0 ok 2008-Apr-30 20:40:51 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-30 20:40:51 STOP finish_task: Finishing task 'rotate ALFA to -90.4 degrees' 2008-Apr-30 20:40:51 LOG5 finish_task: Level: (3) ID = <10274> Status = 0 0 0 0 ok 2008-Apr-30 20:40:51 INFO2 finish_task: DONE finished configuration: rotating ALFA to -90.4 degrees 2008-Apr-30 20:40:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 20:40:51 STOP end_task: Finishing task 'rotate ALFA to -90.4 degrees' with status 'OK' 2008-Apr-30 20:40:51 LOG5 end_task: Level: (3) ID = <10274> Status = 0 0 0 0 ok 2008-Apr-30 20:40:51 START begin_task: Starting task 'waiting on telescope' 2008-Apr-30 20:40:51 LOG5 begin_task: Level: (3) ID = <10276> Status = 0 0 0 0 ok 2008-Apr-30 20:40:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-30 20:40:51 LOG3 waittrk: Start waittrk 5 2008-Apr-30 20:40:51 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-30 20:40:51 LOG5 begin_task: Level: (4) ID = <10277> Status = 0 0 0 0 ok 2008-Apr-30 20:40:56 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-30 20:40:56 LOG5 end_task: Level: (4) ID = <10277> Status = 0 0 0 0 ok 2008-Apr-30 20:40:56 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-30 20:40:56 LOG5 begin_task: Level: (4) ID = <10278> Status = 0 0 0 0 ok 2008-Apr-30 20:41:25 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-30 20:41:25 LOG5 end_task: Level: (4) ID = <10278> Status = 0 0 0 0 ok 2008-Apr-30 20:41:25 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-30 20:41:25 INFO2 waittrk: Now tracking AGES3193_p1_024 2008-Apr-30 20:41:25 LOG4 waittrk: Current telescope position: Az = 111.91 ZA = 14.64 2008-Apr-30 20:41:25 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-30 20:41:25 LOG5 finish_task: Level: (3) ID = <10276> Status = 0 0 0 0 ok 2008-Apr-30 20:41:25 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-30 20:41:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 20:41:25 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-30 20:41:25 LOG5 end_task: Level: (3) ID = <10276> Status = 0 0 0 0 ok 2008-Apr-30 20:41:25 START begin_task: Starting task 'selecting calibration type' 2008-Apr-30 20:41:25 LOG5 begin_task: Level: (3) ID = <10279> Status = 0 0 0 0 ok 2008-Apr-30 20:41:25 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-30 20:41:26 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-30 20:41:26 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 20:41:26 START begin_task: Starting task 'waiting on setcal' 2008-Apr-30 20:41:26 LOG5 begin_task: Level: (4) ID = <10280> Status = 0 0 0 0 ok 2008-Apr-30 20:41:26 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-30 20:41:26 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 20:41:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 20:41:26 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-30 20:41:26 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-30 20:41:26 LOG5 end_task: Level: (4) ID = <10280> Status = 0 0 0 0 ok 2008-Apr-30 20:41:26 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-30 20:41:26 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-30 20:41:26 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-30 20:41:26 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-30 20:41:26 LOG5 begin_task: Level: (4) ID = <10281> Status = 0 0 0 0 ok 2008-Apr-30 20:41:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 20:41:26 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-30 20:41:26 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-30 20:41:26 LOG5 end_task: Level: (4) ID = <10281> Status = 0 0 0 0 ok 2008-Apr-30 20:41:27 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-30 20:41:27 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-30 20:41:27 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-30 20:41:27 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-30 20:41:27 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-30 20:41:27 LOG5 begin_task: Level: (4) ID = <10282> Status = 0 0 0 0 ok 2008-Apr-30 20:41:27 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-30 20:41:27 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-30 20:41:27 LOG5 end_task: Level: (4) ID = <10282> Status = 0 0 0 0 ok 2008-Apr-30 20:41:27 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-30 20:41:27 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-30 20:41:27 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-30 20:41:27 LOG5 finish_task: Level: (3) ID = <10279> Status = 0 0 0 0 ok 2008-Apr-30 20:41:27 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-30 20:41:27 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 20:41:27 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-30 20:41:27 LOG5 end_task: Level: (3) ID = <10279> Status = 0 0 0 0 ok 2008-Apr-30 20:41:27 LOG5 dopset_later: Calling 'dopset_later 47.822560343910574' 2008-Apr-30 20:41:27 INFO3 dopset_later: Setting Doppler correction for 20:42:14 (47.8 seconds from now) 2008-Apr-30 20:41:27 LOG5 antvel: Calling 'antvel 112.150000 14.629897 F 47.822560343910574' 2008-Apr-30 20:41:27 LOG2 antvel: Parameters to Doppler: Heliocentric 88934 2008 121 0.0 2008-Apr-30 20:41:27 INFO5 antvel: Computed antenna velocity: +28.55493 km/s 2008-Apr-30 20:41:27 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=28.554928991000001 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-30 20:41:27 INFO4 dopset_gen: New sky frequencies: 1381.111879 1381.111879 1381.111879 1381.111879 1381.111879 1381.111879 1381.111879 1381.111879 1381.111879 2008-Apr-30 20:41:27 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.111879 sky0=1381.111879 sky1=1381.111879 sky2=1381.111879 sky3=1381.111879 sky4=1381.111879 sky5=1381.111879 sky6=1381.111879 sky7=1381.111879 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-30 20:41:27 LOG2 dopset_gen: Result from 'sky2syn': 1631.111879 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-30 20:41:27 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631111879.0} 2008-Apr-30 20:41:27 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 20:41:27 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-30 20:41:27 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-30 20:41:27 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:16.2 Dec = +23:18:32.6 2008-Apr-30 20:41:27 LOG3 track_source: Calling 'track_source AGES3193_p1_024 095216.2 231832.6 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-30 20:41:27 START begin_task: Starting task 'sending tracking commands' 2008-Apr-30 20:41:27 LOG5 begin_task: Level: (3) ID = <10283> Status = 0 0 0 0 ok 2008-Apr-30 20:41:27 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p1_024} INFO {Slewing to source 'AGES3193_p1_024' ...} 2008-Apr-30 20:41:27 INFO1 track_source: Starting to track AGES3193_p1_024 2008-Apr-30 20:41:27 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p1_024" 2008-Apr-30 20:41:27 LOG3 vw_send: To DATATAKING: set ra 095216.2 2008-Apr-30 20:41:27 LOG3 vw_send: To DATATAKING: set dec 231832.6 2008-Apr-30 20:41:27 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-30 20:41:27 LOG3 vw_send: To DATATAKING: pnt tr 095216.2 231832.6 -CJ 2008-Apr-30 20:41:27 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-30 20:41:27 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-30 20:41:27 LOG5 finish_task: Level: (3) ID = <10283> Status = 0 0 0 0 ok 2008-Apr-30 20:41:27 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-30 20:41:27 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 20:41:27 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-30 20:41:27 LOG5 end_task: Level: (3) ID = <10283> Status = 0 0 0 0 ok 2008-Apr-30 20:41:27 START begin_task: Starting task 'waiting on telescope' 2008-Apr-30 20:41:27 LOG5 begin_task: Level: (3) ID = <10284> Status = 0 0 0 0 ok 2008-Apr-30 20:41:27 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-30 20:41:27 LOG3 waittrk: Start waittrk 5 2008-Apr-30 20:41:27 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-30 20:41:27 LOG5 begin_task: Level: (4) ID = <10285> Status = 0 0 0 0 ok 2008-Apr-30 20:41:27 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631111879.0} 2008-Apr-30 20:41:27 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 20:41:27 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p1_024" 2008-Apr-30 20:41:27 LOG4 got_cormsg: From DATATAKING: set ra 095216.2 2008-Apr-30 20:41:27 LOG4 got_cormsg: From DATATAKING: set dec 231832.6 2008-Apr-30 20:41:27 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-30 20:41:27 LOG4 got_cormsg: From DATATAKING: vw% 095216.2 2008-Apr-30 20:41:27 LOG4 got_cormsg: From DATATAKING: vw% 231832.6 2008-Apr-30 20:41:27 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 20:41:27 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-30 20:41:27 LOG4 got_cormsg: From DATATAKING: pnt tr 095216.2 231832.6 -CJ 2008-Apr-30 20:41:27 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-30 20:41:27 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-30 20:41:27 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 20:41:32 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-30 20:41:32 LOG5 end_task: Level: (4) ID = <10285> Status = 0 0 0 0 ok 2008-Apr-30 20:41:32 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-30 20:41:32 LOG5 begin_task: Level: (4) ID = <10286> Status = 0 0 0 0 ok 2008-Apr-30 20:41:34 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-30 20:41:34 LOG5 end_task: Level: (4) ID = <10286> Status = 0 0 0 0 ok 2008-Apr-30 20:41:34 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-30 20:41:34 INFO2 waittrk: Now tracking AGES3193_p1_024 2008-Apr-30 20:41:34 LOG4 waittrk: Current telescope position: Az = 111.89 ZA = 14.66 2008-Apr-30 20:41:34 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-30 20:41:34 LOG5 finish_task: Level: (3) ID = <10284> Status = 0 0 0 0 ok 2008-Apr-30 20:41:34 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-30 20:41:34 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 20:41:34 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-30 20:41:34 LOG5 end_task: Level: (3) ID = <10284> Status = 0 0 0 0 ok 2008-Apr-30 20:41:34 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-30 20:41:34 LOG5 begin_task: Level: (3) ID = <10287> Status = 0 0 0 0 ok 2008-Apr-30 20:41:34 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-30 20:41:34 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-30 20:41:34 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-30 20:41:34 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-30 20:41:35 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 20:41:35 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-30 20:41:35 LOG5 begin_task: Level: (4) ID = <10288> Status = 0 0 0 0 ok 2008-Apr-30 20:41:35 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-30 20:41:35 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 20:41:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 20:41:37 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-30 20:41:37 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-30 20:41:37 LOG5 end_task: Level: (4) ID = <10288> Status = 0 0 0 0 ok 2008-Apr-30 20:41:37 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-30 20:41:37 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-30 20:41:37 LOG5 begin_task: Level: (4) ID = <10289> Status = 0 0 0 0 ok 2008-Apr-30 20:41:37 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-30 20:41:37 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-30 20:41:37 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-30 20:41:37 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-30 20:41:38 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-30 20:41:38 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-30 20:41:38 LOG5 begin_task: Level: (5) ID = <10290> Status = 0 0 0 0 ok 2008-Apr-30 20:41:38 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-30 20:41:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 20:41:38 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 1 dB --- beam 1: 8 6 dB 2008-Apr-30 20:41:38 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 6 dB 2008-Apr-30 20:41:38 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-30 20:41:38 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 2 2 dB 2008-Apr-30 20:41:38 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-30 20:41:38 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-30 20:41:38 LOG5 end_task: Level: (5) ID = <10290> Status = 0 0 0 0 ok 2008-Apr-30 20:41:38 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.931 0.895 ALFA beam 1: 0.872 1.009 2008-Apr-30 20:41:38 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.033 0.932 ALFA beam 3: 0.959 1.044 2008-Apr-30 20:41:38 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.922 0.980 ALFA beam 5: 1.066 0.971 2008-Apr-30 20:41:38 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.026 1.003 ALFA beam 7: 1.118 1.111 2008-Apr-30 20:41:38 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-30 20:41:38 LOG5 finish_task: Level: (4) ID = <10289> Status = 0 0 0 0 ok 2008-Apr-30 20:41:38 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-30 20:41:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 20:41:38 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-30 20:41:38 LOG5 end_task: Level: (4) ID = <10289> Status = 0 0 0 0 ok 2008-Apr-30 20:41:38 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-30 20:41:38 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-30 20:41:38 LOG5 finish_task: Level: (3) ID = <10287> Status = 0 0 0 0 ok 2008-Apr-30 20:41:38 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-30 20:41:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 20:41:38 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-30 20:41:38 LOG5 end_task: Level: (3) ID = <10287> Status = 0 0 0 0 ok 2008-Apr-30 20:41:38 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 SS 2008-Apr-30 20:41:38 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 SS 2008-Apr-30 20:41:38 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 SS 2008-Apr-30 20:41:38 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 SS 2008-Apr-30 20:41:38 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-30 20:41:38 START begin_task: Starting task 'WAPP calibration' 2008-Apr-30 20:41:38 LOG5 begin_task: Level: (3) ID = <10291> Status = 0 0 0 0 ok 2008-Apr-30 20:41:38 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-30 20:41:38 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-30 20:41:38 START begin_task: Starting task 'selecting calibration type' 2008-Apr-30 20:41:38 LOG5 begin_task: Level: (4) ID = <10292> Status = 0 0 0 0 ok 2008-Apr-30 20:41:38 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-30 20:41:38 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-30 20:41:38 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 20:41:38 START begin_task: Starting task 'waiting on setcal' 2008-Apr-30 20:41:38 LOG5 begin_task: Level: (5) ID = <10293> Status = 0 0 0 0 ok 2008-Apr-30 20:41:39 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 SS' 2008-Apr-30 20:41:39 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-30 20:41:39 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 20:41:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 20:41:39 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-30 20:41:39 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-30 20:41:39 LOG5 end_task: Level: (5) ID = <10293> Status = 0 0 0 0 ok 2008-Apr-30 20:41:39 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-30 20:41:39 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-30 20:41:39 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-30 20:41:39 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-30 20:41:39 LOG5 begin_task: Level: (5) ID = <10294> Status = 0 0 0 0 ok 2008-Apr-30 20:41:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 20:41:39 NOTE WAPPDATA-new_file: New FITS file: wapp.20080430.a2048.0006.fits 2008-Apr-30 20:41:39 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080430.a2048.0006.fits} 2008-Apr-30 20:41:39 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-30 20:41:39 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-30 20:41:39 LOG5 end_task: Level: (5) ID = <10294> Status = 0 0 0 0 ok 2008-Apr-30 20:41:39 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-30 20:41:39 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-30 20:41:39 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-30 20:41:39 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-30 20:41:39 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-30 20:41:39 LOG5 begin_task: Level: (5) ID = <10295> Status = 0 0 0 0 ok 2008-Apr-30 20:41:39 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-30 20:41:39 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-30 20:41:39 LOG5 end_task: Level: (5) ID = <10295> Status = 0 0 0 0 ok 2008-Apr-30 20:41:39 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-30 20:41:39 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-30 20:41:39 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-30 20:41:39 LOG5 finish_task: Level: (4) ID = <10292> Status = 0 0 0 0 ok 2008-Apr-30 20:41:39 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-30 20:41:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 20:41:39 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-30 20:41:39 LOG5 end_task: Level: (4) ID = <10292> Status = 0 0 0 0 ok 2008-Apr-30 20:41:39 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-30 20:41:39 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-30 20:41:39 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-30 20:41:39 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-30 20:41:39 LOG5 begin_task: Level: (4) ID = <10296> Status = 0 0 0 0 ok 2008-Apr-30 20:41:40 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-30 20:41:40 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-30 20:41:40 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-30 20:41:40 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-30 20:41:40 LOG5 end_task: Level: (4) ID = <10296> Status = 0 0 0 0 ok 2008-Apr-30 20:41:40 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-30 20:41:40 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-30 20:41:40 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-30 20:41:40 LOG5 begin_task: Level: (4) ID = <10297> Status = 0 0 0 0 ok 2008-Apr-30 20:41:40 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-30 20:41:40 LOG5 log_alfabeam: Parameters: 9.8711666666666655 23.30905555555556 10.865280 2008.333640676097 -90.400063 2008-Apr-30 20:41:40 LOG4 log_alfabeam: ALFABEAM 0 9.871166666666669 23.309055555555553 2008-Apr-30 20:41:40 LOG4 log_alfabeam: ALFABEAM 1 9.869087823241440 23.400334852284988 2008-Apr-30 20:41:40 LOG4 log_alfabeam: ALFABEAM 2 9.863738702180465 23.339217260169267 2008-Apr-30 20:41:40 LOG4 log_alfabeam: ALFABEAM 3 9.865849578420091 23.247841649639202 2008-Apr-30 20:41:40 LOG4 log_alfabeam: ALFABEAM 4 9.873283345561953 23.218193598465415 2008-Apr-30 20:41:40 LOG4 log_alfabeam: ALFABEAM 5 9.878591069056853 23.278806451265062 2008-Apr-30 20:41:40 LOG4 log_alfabeam: ALFABEAM 6 9.876506193223772 23.369572572504065 2008-Apr-30 20:41:40 INFO2 take_spectra: Starting WAPP scan: 812100114 2008-Apr-30 20:41:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-30 20:41:40 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-30 20:41:40 LOG5 begin_task: Level: (5) ID = <10298> Status = 0 0 0 0 ok 2008-Apr-30 20:41:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-30 20:41:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 2501.00 2008-Apr-30 20:41:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.111879 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-30 20:41:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.111879 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 20:41:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.111879 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 20:41:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.111879 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-30 20:41:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.111879 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 20:41:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.111879 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 20:41:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.111879 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 20:41:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.111879 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 20:41:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.111879 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 20:41:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-30 20:41:46 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-30 20:41:46 LOG5 end_task: Level: (5) ID = <10298> Status = 0 0 0 0 ok 2008-Apr-30 20:41:46 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-30 20:41:46 LOG5 end_task: Level: (4) ID = <10297> Status = 0 0 0 0 ok 2008-Apr-30 20:41:46 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-30 20:41:46 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-30 20:41:46 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-30 20:41:46 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-30 20:41:46 LOG5 begin_task: Level: (4) ID = <10299> Status = 0 0 0 0 ok 2008-Apr-30 20:41:46 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-30 20:41:46 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-30 20:41:46 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-30 20:41:46 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-30 20:41:46 LOG5 end_task: Level: (4) ID = <10299> Status = 0 0 0 0 ok 2008-Apr-30 20:41:46 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-30 20:41:46 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-30 20:41:46 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-30 20:41:46 LOG5 begin_task: Level: (4) ID = <10300> Status = 0 0 0 0 ok 2008-Apr-30 20:41:46 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-30 20:41:46 LOG5 log_alfabeam: Parameters: 9.8711666666666655 23.30905555555556 10.867229 2008.3336408979137 -90.400063 2008-Apr-30 20:41:46 LOG4 log_alfabeam: ALFABEAM 0 9.871166666666667 23.309055555555556 2008-Apr-30 20:41:46 LOG4 log_alfabeam: ALFABEAM 1 9.869083020982576 23.400313860456400 2008-Apr-30 20:41:46 LOG4 log_alfabeam: ALFABEAM 2 9.863737132350938 23.339143716776416 2008-Apr-30 20:41:46 LOG4 log_alfabeam: ALFABEAM 3 9.865852756751154 23.247789620849939 2008-Apr-30 20:41:46 LOG4 log_alfabeam: ALFABEAM 4 9.873288045448117 23.218214189282190 2008-Apr-30 20:41:46 LOG4 log_alfabeam: ALFABEAM 5 9.878592647183822 23.278879975344566 2008-Apr-30 20:41:46 LOG4 log_alfabeam: ALFABEAM 6 9.876503018269835 23.369626023727264 2008-Apr-30 20:41:46 INFO2 take_spectra: Starting WAPP scan: 812100115 2008-Apr-30 20:41:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-30 20:41:47 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-30 20:41:47 LOG5 begin_task: Level: (5) ID = <10301> Status = 0 0 0 0 ok 2008-Apr-30 20:41:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-30 20:41:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 2508.00 2008-Apr-30 20:41:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.557 > 1.4)! 2008-Apr-30 20:41:52 LOG4 check_wapp_levels: WAPP-1 power levels: 1.271 1.135 1.182 1.384 2008-Apr-30 20:41:52 LOG4 check_wapp_levels: WAPP-2 power levels: 1.392 1.283 1.322 1.418 2008-Apr-30 20:41:52 LOG4 check_wapp_levels: WAPP-3 power levels: 1.278 1.338 1.455 1.271 2008-Apr-30 20:41:52 LOG4 check_wapp_levels: WAPP-4 power levels: 1.430 1.400 1.557 1.551 2008-Apr-30 20:41:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.111879 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-30 20:41:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.111879 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 20:41:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.111879 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 20:41:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.111879 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-30 20:41:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.111879 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 20:41:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.111879 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 20:41:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.111879 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 20:41:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.111879 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 20:41:53 LOG3 WAPP=2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.111879 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 20:41:53 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-30 20:41:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-30 20:41:53 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-30 20:41:53 LOG5 end_task: Level: (5) ID = <10301> Status = 0 0 0 0 ok 2008-Apr-30 20:41:53 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-30 20:41:53 LOG5 end_task: Level: (4) ID = <10300> Status = 0 0 0 0 ok 2008-Apr-30 20:41:53 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-30 20:41:53 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-30 20:41:53 LOG5 finish_task: Level: (3) ID = <10291> Status = 0 0 0 0 ok 2008-Apr-30 20:41:53 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-30 20:41:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 20:41:53 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-30 20:41:53 LOG5 end_task: Level: (3) ID = <10291> Status = 0 0 0 0 ok 2008-Apr-30 20:41:53 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-30 20:41:53 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 112.15 and ZA = 14.63 2008-Apr-30 20:41:53 LOG3 track_source: Calling 'track_source AGES3193_p1_024 112.15 14.6298968808 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-30 20:41:53 START begin_task: Starting task 'sending tracking commands' 2008-Apr-30 20:41:53 LOG5 begin_task: Level: (3) ID = <10302> Status = 0 0 0 0 ok 2008-Apr-30 20:41:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p1_024} INFO {Slewing to source 'AGES3193_p1_024' ...} 2008-Apr-30 20:41:53 INFO1 track_source: Starting to track AGES3193_p1_024 2008-Apr-30 20:41:53 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p1_024" 2008-Apr-30 20:41:53 LOG3 vw_send: To DATATAKING: set ra 112.15 2008-Apr-30 20:41:53 LOG3 vw_send: To DATATAKING: set dec 14.6298968808 2008-Apr-30 20:41:53 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-30 20:41:53 LOG3 vw_send: To DATATAKING: pnt tr 112.15 14.6298968808 -CF 2008-Apr-30 20:41:53 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-30 20:41:53 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-30 20:41:53 LOG5 finish_task: Level: (3) ID = <10302> Status = 0 0 0 0 ok 2008-Apr-30 20:41:53 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-30 20:41:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 20:41:54 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-30 20:41:54 LOG5 end_task: Level: (3) ID = <10302> Status = 0 0 0 0 ok 2008-Apr-30 20:41:54 LOG1 fixed_driftmap: Parameters: HA = +00:59:00.7 Start = 10:52:29.9 LST = 10:52:09.0 diff = 20.9 secs 2008-Apr-30 20:41:54 INFO2 fixed_driftmap: Waiting 18.9 seconds for RA 9:53:29 2008-Apr-30 20:41:54 INFO2 lstwait: Waiting for 18.8 secs from LST 10:52:09 to LST 10:52:28 ... 2008-Apr-30 20:41:54 LOG4 send_obs_status: To obs_status: <1> TASKTIME 18.829938532705587 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-30 20:41:54 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-30 20:41:54 LOG5 begin_task: Level: (3) ID = <10303> Status = 0 0 0 0 ok 2008-Apr-30 20:41:54 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p1_024" 2008-Apr-30 20:41:54 LOG3 WAPP=1-save_rfcalc: Channel 8: Sky freq = 1381.111879 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 20:41:54 LOG4 got_cormsg: From DATATAKING: set ra 112.15 2008-Apr-30 20:41:54 LOG4 got_cormsg: From DATATAKING: set dec 14.6298968808 2008-Apr-30 20:41:54 LOG4 got_cormsg: From DATATAKING: vw% 112.15 2008-Apr-30 20:41:54 LOG4 got_cormsg: From DATATAKING: vw% 14.6298968808 2008-Apr-30 20:41:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 20:41:54 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-30 20:41:54 LOG4 got_cormsg: From DATATAKING: pnt tr 112.15 14.6298968808 -CF 2008-Apr-30 20:41:54 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-30 20:41:54 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-30 20:41:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 20:41:58 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.877 and 1.118 2008-Apr-30 20:42:12 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-30 20:42:12 LOG5 end_task: Level: (3) ID = <10303> Status = 0 0 0 0 ok 2008-Apr-30 20:42:12 LOG4 lstwait: Finished waiting, the gui caused difference: 0.1697074400048848 2008-Apr-30 20:42:12 INFO3 lstwait: Finished waiting 2008-Apr-30 20:42:13 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-30 20:42:13 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-30 20:42:13 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-30 20:42:13 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-30 20:42:13 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-30 20:42:13 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-30 20:42:13 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-30 20:42:13 LOG5 begin_task: Level: (3) ID = <10304> Status = 0 0 0 0 ok 2008-Apr-30 20:42:13 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-30 20:42:13 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-30 20:42:13 INFO2 take_spectra: Starting WAPP scan: 812100116 2008-Apr-30 20:42:13 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-30 20:42:13 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-30 20:42:13 LOG5 begin_task: Level: (4) ID = <10305> Status = 0 0 0 0 ok 2008-Apr-30 20:42:13 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-30 20:42:13 INFO1 WAPP=1+2+3+4-start_spectra: start sec 2534.00 2008-Apr-30 20:42:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.111879 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-30 20:42:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.111879 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 20:42:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.111879 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 20:42:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.111879 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-30 20:42:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.111879 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 20:42:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.111879 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 20:42:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.111879 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 20:42:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.111879 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 20:42:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.111879 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 20:43:53 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 20:43:53.303 (seconds: 74633.303)!} 2008-Apr-30 20:43:53 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 20:43:53.303 (seconds: 74633.303)! 2008-Apr-30 20:43:54 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 74632.0 to 74633.0! 2008-Apr-30 20:43:55 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (74632.0 - 74634.0)! 2008-Apr-30 20:58:52 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 20:58:52.303 (seconds: 75532.303)!} 2008-Apr-30 20:58:52 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 20:58:52.303 (seconds: 75532.303)! 2008-Apr-30 20:58:53 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 75531.0 to 75532.0! 2008-Apr-30 20:58:54 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (75531.0 - 75533.0)! 2008-Apr-30 21:02:14 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-30 21:02:14 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-30 21:02:14 LOG5 end_task: Level: (4) ID = <10305> Status = 0 0 0 0 ok 2008-Apr-30 21:02:14 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-30 21:02:14 LOG5 end_task: Level: (3) ID = <10304> Status = 0 0 0 0 ok 2008-Apr-30 21:02:14 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-30 21:02:14 LOG5 finish_task: Level: (2) ID = <10272> Status = 0 0 0 0 ok 2008-Apr-30 21:02:14 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-30 21:02:14 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-30 21:02:14 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-30 21:02:14 LOG5 end_task: Level: (2) ID = <10272> Status = 0 0 0 0 ok 2008-Apr-30 21:02:14 COMMAND run_command_line: EXECUTING command 31: 'FIXEDDRIFT az=313.22 alfaangle=58.9 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_068 ra=120900.00 dec=71930.00' 2008-Apr-30 21:02:14 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-30 21:02:15 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-30 21:02:15 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 313.22 58.9 hcorcal 5 tracking no first 1 AGESVC1A_p2_068 120900.00 71930.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-30 21:02:15 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-30 21:02:15 LOG5 begin_task: Level: (2) ID = <10306> Status = 0 0 0 0 ok 2008-Apr-30 21:02:15 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES3193_p1_024' 2008-Apr-30 21:02:15 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-30 21:02:15 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1A_p2_068} 2008-Apr-30 21:02:15 INFO3 fixed_driftmap: Sending telescope to Az = 313.22 and ZA = 15.75 2008-Apr-30 21:02:15 LOG3 track_source: Calling 'track_source AGESVC1A_p2_068 313.22 15.7483079031 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-30 21:02:15 START begin_task: Starting task 'sending tracking commands' 2008-Apr-30 21:02:15 LOG5 begin_task: Level: (3) ID = <10307> Status = 0 0 0 0 ok 2008-Apr-30 21:02:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_068} INFO {Slewing to source 'AGESVC1A_p2_068' ...} 2008-Apr-30 21:02:15 INFO1 track_source: Starting to track AGESVC1A_p2_068 2008-Apr-30 21:02:15 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_068" 2008-Apr-30 21:02:15 LOG3 vw_send: To DATATAKING: set ra 313.22 2008-Apr-30 21:02:15 LOG3 vw_send: To DATATAKING: set dec 15.7483079031 2008-Apr-30 21:02:15 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-30 21:02:15 LOG3 vw_send: To DATATAKING: pnt tr 313.22 15.7483079031 -CF 2008-Apr-30 21:02:15 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-30 21:02:15 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-30 21:02:15 LOG5 finish_task: Level: (3) ID = <10307> Status = 0 0 0 0 ok 2008-Apr-30 21:02:15 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-30 21:02:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 21:02:15 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-30 21:02:15 LOG5 end_task: Level: (3) ID = <10307> Status = 0 0 0 0 ok 2008-Apr-30 21:02:15 START begin_task: Starting task 'rotate ALFA to +58.9 degrees' 2008-Apr-30 21:02:15 LOG5 begin_task: Level: (3) ID = <10308> Status = 0 0 0 0 ok 2008-Apr-30 21:02:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +58.9 degrees ...} 2008-Apr-30 21:02:15 INFO2 rotate_alfa: ALFA commanded to +58.9 degrees 2008-Apr-30 21:02:15 LOG3 sock_errsend: To ALFAMOTOR: POSITION 58.9 REPLY 2008-Apr-30 21:02:15 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-30 21:02:15 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-30 21:02:15 LOG5 begin_task: Level: (4) ID = <10309> Status = 0 0 0 0 ok 2008-Apr-30 21:02:15 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_068" 2008-Apr-30 21:02:15 LOG4 got_cormsg: From DATATAKING: set ra 313.22 2008-Apr-30 21:02:15 LOG4 got_cormsg: From DATATAKING: set dec 15.7483079031 2008-Apr-30 21:02:15 LOG4 got_cormsg: From DATATAKING: vw% 313.22 2008-Apr-30 21:02:15 LOG4 got_cormsg: From DATATAKING: vw% 15.7483079031 2008-Apr-30 21:02:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 21:02:15 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-30 21:02:15 LOG4 got_cormsg: From DATATAKING: pnt tr 313.22 15.7483079031 -CF 2008-Apr-30 21:02:15 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-30 21:02:15 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-30 21:02:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 21:03:38 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-30 21:03:38 INFO3 alfa_motor: ALFA rotator in-position +58.90 degrees 2008-Apr-30 21:03:39 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-30 21:03:39 LOG5 end_task: Level: (4) ID = <10309> Status = 0 0 0 0 ok 2008-Apr-30 21:03:39 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-30 21:03:39 STOP finish_task: Finishing task 'rotate ALFA to +58.9 degrees' 2008-Apr-30 21:03:39 LOG5 finish_task: Level: (3) ID = <10308> Status = 0 0 0 0 ok 2008-Apr-30 21:03:39 INFO2 finish_task: DONE finished configuration: rotating ALFA to +58.9 degrees 2008-Apr-30 21:03:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 21:03:39 STOP end_task: Finishing task 'rotate ALFA to +58.9 degrees' with status 'OK' 2008-Apr-30 21:03:39 LOG5 end_task: Level: (3) ID = <10308> Status = 0 0 0 0 ok 2008-Apr-30 21:03:39 START begin_task: Starting task 'waiting on telescope' 2008-Apr-30 21:03:39 LOG5 begin_task: Level: (3) ID = <10310> Status = 0 0 0 0 ok 2008-Apr-30 21:03:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-30 21:03:39 LOG3 waittrk: Start waittrk 5 2008-Apr-30 21:03:39 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-30 21:03:39 LOG5 begin_task: Level: (4) ID = <10311> Status = 0 0 0 0 ok 2008-Apr-30 21:03:44 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-30 21:03:44 LOG5 end_task: Level: (4) ID = <10311> Status = 0 0 0 0 ok 2008-Apr-30 21:03:44 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-30 21:03:44 LOG5 begin_task: Level: (4) ID = <10312> Status = 0 0 0 0 ok 2008-Apr-30 21:10:35 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-30 21:10:35 LOG5 end_task: Level: (4) ID = <10312> Status = 0 0 0 0 ok 2008-Apr-30 21:10:35 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-30 21:10:35 INFO2 waittrk: Now tracking AGESVC1A_p2_068 2008-Apr-30 21:10:35 LOG4 waittrk: Current telescope position: Az = 312.84 ZA = 15.74 2008-Apr-30 21:10:35 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-30 21:10:35 LOG5 finish_task: Level: (3) ID = <10310> Status = 0 0 0 0 ok 2008-Apr-30 21:10:35 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-30 21:10:35 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 21:10:35 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-30 21:10:35 LOG5 end_task: Level: (3) ID = <10310> Status = 0 0 0 0 ok 2008-Apr-30 21:10:35 START begin_task: Starting task 'selecting calibration type' 2008-Apr-30 21:10:35 LOG5 begin_task: Level: (3) ID = <10313> Status = 0 0 0 0 ok 2008-Apr-30 21:10:35 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-30 21:10:35 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-30 21:10:35 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 21:10:35 START begin_task: Starting task 'waiting on setcal' 2008-Apr-30 21:10:35 LOG5 begin_task: Level: (4) ID = <10314> Status = 0 0 0 0 ok 2008-Apr-30 21:10:35 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-30 21:10:35 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 21:10:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 21:10:36 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-30 21:10:36 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-30 21:10:36 LOG5 end_task: Level: (4) ID = <10314> Status = 0 0 0 0 ok 2008-Apr-30 21:10:36 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-30 21:10:36 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-30 21:10:36 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-30 21:10:36 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-30 21:10:36 LOG5 begin_task: Level: (4) ID = <10315> Status = 0 0 0 0 ok 2008-Apr-30 21:10:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 21:10:36 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-30 21:10:36 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-30 21:10:36 LOG5 end_task: Level: (4) ID = <10315> Status = 0 0 0 0 ok 2008-Apr-30 21:10:36 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-30 21:10:36 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-30 21:10:36 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-30 21:10:36 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-30 21:10:36 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-30 21:10:36 LOG5 begin_task: Level: (4) ID = <10316> Status = 0 0 0 0 ok 2008-Apr-30 21:10:36 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-30 21:10:36 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-30 21:10:36 LOG5 end_task: Level: (4) ID = <10316> Status = 0 0 0 0 ok 2008-Apr-30 21:10:36 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-30 21:10:36 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-30 21:10:36 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-30 21:10:36 LOG5 finish_task: Level: (3) ID = <10313> Status = 0 0 0 0 ok 2008-Apr-30 21:10:36 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-30 21:10:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 21:10:36 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-30 21:10:36 LOG5 end_task: Level: (3) ID = <10313> Status = 0 0 0 0 ok 2008-Apr-30 21:10:36 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2008-Apr-30 21:10:36 INFO2 astwait: Waiting for 90 seconds from 01:10:36 to 01:12:06 UTC ... 2008-Apr-30 21:10:36 LOG4 send_obs_status: To obs_status: <1> TASKTIME 90 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-30 21:10:36 START begin_task: Starting task 'waiting on waiting for AST time' 2008-Apr-30 21:10:36 LOG5 begin_task: Level: (3) ID = <10317> Status = 0 0 0 0 ok 2008-Apr-30 21:12:06 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2008-Apr-30 21:12:06 LOG5 end_task: Level: (3) ID = <10317> Status = 0 0 0 0 ok 2008-Apr-30 21:12:06 INFO3 astwait: Finished waiting 2008-Apr-30 21:12:06 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-30 21:12:06 LOG5 dopset_later: Calling 'dopset_later 60.635123700668181' 2008-Apr-30 21:12:06 INFO3 dopset_later: Setting Doppler correction for 21:13:06 (60.6 seconds from now) 2008-Apr-30 21:12:06 LOG5 antvel: Calling 'antvel 313.220000 15.748308 F 60.635123700668181' 2008-Apr-30 21:12:06 LOG2 antvel: Parameters to Doppler: Heliocentric 90786 2008 121 0.0 2008-Apr-30 21:12:06 INFO5 antvel: Computed antenna velocity: +19.10698 km/s 2008-Apr-30 21:12:06 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=19.1069826596 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-30 21:12:06 INFO4 dopset_gen: New sky frequencies: 1381.155402 1381.155402 1381.155402 1381.155402 1381.155402 1381.155402 1381.155402 1381.155402 1381.155402 2008-Apr-30 21:12:06 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.155402 sky0=1381.155402 sky1=1381.155402 sky2=1381.155402 sky3=1381.155402 sky4=1381.155402 sky5=1381.155402 sky6=1381.155402 sky7=1381.155402 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-30 21:12:06 LOG2 dopset_gen: Result from 'sky2syn': 1631.155402 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-30 21:12:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631155402.0} 2008-Apr-30 21:12:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 21:12:06 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-30 21:12:06 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-30 21:12:06 INFO5 fixed_driftmap: Tracking J2000 position: RA = 12:08:03.8 Dec = +07:19:21.9 2008-Apr-30 21:12:06 LOG3 track_source: Calling 'track_source AGESVC1A_p2_068 120803.8 071921.9 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-30 21:12:06 START begin_task: Starting task 'sending tracking commands' 2008-Apr-30 21:12:06 LOG5 begin_task: Level: (3) ID = <10318> Status = 0 0 0 0 ok 2008-Apr-30 21:12:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_068} INFO {Slewing to source 'AGESVC1A_p2_068' ...} 2008-Apr-30 21:12:06 INFO1 track_source: Starting to track AGESVC1A_p2_068 2008-Apr-30 21:12:06 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_068" 2008-Apr-30 21:12:06 LOG3 vw_send: To DATATAKING: set ra 120803.8 2008-Apr-30 21:12:06 LOG3 vw_send: To DATATAKING: set dec 071921.9 2008-Apr-30 21:12:06 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-30 21:12:06 LOG3 vw_send: To DATATAKING: pnt tr 120803.8 071921.9 -CJ 2008-Apr-30 21:12:06 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-30 21:12:06 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-30 21:12:06 LOG5 finish_task: Level: (3) ID = <10318> Status = 0 0 0 0 ok 2008-Apr-30 21:12:06 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-30 21:12:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 21:12:06 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-30 21:12:06 LOG5 end_task: Level: (3) ID = <10318> Status = 0 0 0 0 ok 2008-Apr-30 21:12:06 START begin_task: Starting task 'waiting on telescope' 2008-Apr-30 21:12:06 LOG5 begin_task: Level: (3) ID = <10319> Status = 0 0 0 0 ok 2008-Apr-30 21:12:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-30 21:12:06 LOG3 waittrk: Start waittrk 5 2008-Apr-30 21:12:06 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-30 21:12:06 LOG5 begin_task: Level: (4) ID = <10320> Status = 0 0 0 0 ok 2008-Apr-30 21:12:06 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631155402.0} 2008-Apr-30 21:12:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 21:12:06 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_068" 2008-Apr-30 21:12:06 LOG4 got_cormsg: From DATATAKING: set ra 120803.8 2008-Apr-30 21:12:06 LOG4 got_cormsg: From DATATAKING: set dec 071921.9 2008-Apr-30 21:12:06 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-30 21:12:06 LOG4 got_cormsg: From DATATAKING: vw% 120803.8 2008-Apr-30 21:12:06 LOG4 got_cormsg: From DATATAKING: vw% 071921.9 2008-Apr-30 21:12:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 21:12:06 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-30 21:12:06 LOG4 got_cormsg: From DATATAKING: pnt tr 120803.8 071921.9 -CJ 2008-Apr-30 21:12:06 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-30 21:12:06 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2008-Apr-30 21:12:11 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-30 21:12:11 LOG5 end_task: Level: (4) ID = <10320> Status = 0 0 0 0 ok 2008-Apr-30 21:12:11 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-30 21:12:11 LOG5 begin_task: Level: (4) ID = <10321> Status = 0 0 0 0 ok 2008-Apr-30 21:12:13 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-30 21:12:13 LOG5 end_task: Level: (4) ID = <10321> Status = 0 0 0 0 ok 2008-Apr-30 21:12:13 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-30 21:12:13 INFO2 waittrk: Now tracking AGESVC1A_p2_068 2008-Apr-30 21:12:13 LOG4 waittrk: Current telescope position: Az = 312.89 ZA = 15.73 2008-Apr-30 21:12:13 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-30 21:12:13 LOG5 finish_task: Level: (3) ID = <10319> Status = 0 0 0 0 ok 2008-Apr-30 21:12:13 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-30 21:12:13 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 21:12:13 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-30 21:12:13 LOG5 end_task: Level: (3) ID = <10319> Status = 0 0 0 0 ok 2008-Apr-30 21:12:13 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-30 21:12:13 LOG5 begin_task: Level: (3) ID = <10322> Status = 0 0 0 0 ok 2008-Apr-30 21:12:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-30 21:12:13 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-30 21:12:13 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-30 21:12:13 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-30 21:12:13 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 21:12:13 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-30 21:12:13 LOG5 begin_task: Level: (4) ID = <10323> Status = 0 0 0 0 ok 2008-Apr-30 21:12:14 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-30 21:12:14 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 21:12:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 21:12:16 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-30 21:12:16 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-30 21:12:16 LOG5 end_task: Level: (4) ID = <10323> Status = 0 0 0 0 ok 2008-Apr-30 21:12:16 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-30 21:12:16 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-30 21:12:16 LOG5 begin_task: Level: (4) ID = <10324> Status = 0 0 0 0 ok 2008-Apr-30 21:12:16 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-30 21:12:16 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-30 21:12:16 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-30 21:12:16 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-30 21:12:16 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-30 21:12:16 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-30 21:12:16 LOG5 begin_task: Level: (5) ID = <10325> Status = 0 0 0 0 ok 2008-Apr-30 21:12:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 21:12:17 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-30 21:12:17 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 1 dB --- beam 1: 8 6 dB 2008-Apr-30 21:12:17 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 6 dB 2008-Apr-30 21:12:17 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-30 21:12:17 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 2 3 dB 2008-Apr-30 21:12:17 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-30 21:12:17 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-30 21:12:17 LOG5 end_task: Level: (5) ID = <10325> Status = 0 0 0 0 ok 2008-Apr-30 21:12:17 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.919 0.897 ALFA beam 1: 0.894 1.087 2008-Apr-30 21:12:17 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.070 0.973 ALFA beam 3: 1.001 1.059 2008-Apr-30 21:12:17 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.966 0.987 ALFA beam 5: 1.043 0.942 2008-Apr-30 21:12:17 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.012 1.036 ALFA beam 7: 1.099 0.923 2008-Apr-30 21:12:17 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-30 21:12:17 LOG5 finish_task: Level: (4) ID = <10324> Status = 0 0 0 0 ok 2008-Apr-30 21:12:17 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-30 21:12:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 21:12:17 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-30 21:12:17 LOG5 end_task: Level: (4) ID = <10324> Status = 0 0 0 0 ok 2008-Apr-30 21:12:17 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-30 21:12:17 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-30 21:12:17 LOG5 finish_task: Level: (3) ID = <10322> Status = 0 0 0 0 ok 2008-Apr-30 21:12:17 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-30 21:12:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 21:12:17 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-30 21:12:17 LOG5 end_task: Level: (3) ID = <10322> Status = 0 0 0 0 ok 2008-Apr-30 21:12:17 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 SS 2008-Apr-30 21:12:17 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 SS 2008-Apr-30 21:12:17 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 SS 2008-Apr-30 21:12:17 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 SS 2008-Apr-30 21:12:17 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-30 21:12:17 START begin_task: Starting task 'WAPP calibration' 2008-Apr-30 21:12:17 LOG5 begin_task: Level: (3) ID = <10326> Status = 0 0 0 0 ok 2008-Apr-30 21:12:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-30 21:12:17 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-30 21:12:17 START begin_task: Starting task 'selecting calibration type' 2008-Apr-30 21:12:17 LOG5 begin_task: Level: (4) ID = <10327> Status = 0 0 0 0 ok 2008-Apr-30 21:12:17 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-30 21:12:17 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-30 21:12:17 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 21:12:17 START begin_task: Starting task 'waiting on setcal' 2008-Apr-30 21:12:17 LOG5 begin_task: Level: (5) ID = <10328> Status = 0 0 0 0 ok 2008-Apr-30 21:12:17 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 SS' 2008-Apr-30 21:12:18 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-30 21:12:18 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 21:12:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 21:12:18 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-30 21:12:18 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-30 21:12:18 LOG5 end_task: Level: (5) ID = <10328> Status = 0 0 0 0 ok 2008-Apr-30 21:12:18 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-30 21:12:18 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-30 21:12:18 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-30 21:12:18 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-30 21:12:18 LOG5 begin_task: Level: (5) ID = <10329> Status = 0 0 0 0 ok 2008-Apr-30 21:12:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 21:12:18 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-30 21:12:18 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-30 21:12:18 LOG5 end_task: Level: (5) ID = <10329> Status = 0 0 0 0 ok 2008-Apr-30 21:12:18 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-30 21:12:18 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-30 21:12:18 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-30 21:12:18 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-30 21:12:18 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-30 21:12:18 LOG5 begin_task: Level: (5) ID = <10330> Status = 0 0 0 0 ok 2008-Apr-30 21:12:18 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-30 21:12:18 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-30 21:12:18 LOG5 end_task: Level: (5) ID = <10330> Status = 0 0 0 0 ok 2008-Apr-30 21:12:18 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-30 21:12:18 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-30 21:12:18 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-30 21:12:18 LOG5 finish_task: Level: (4) ID = <10327> Status = 0 0 0 0 ok 2008-Apr-30 21:12:18 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-30 21:12:18 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 21:12:18 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-30 21:12:18 LOG5 end_task: Level: (4) ID = <10327> Status = 0 0 0 0 ok 2008-Apr-30 21:12:18 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-30 21:12:18 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-30 21:12:18 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-30 21:12:18 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-30 21:12:18 LOG5 begin_task: Level: (4) ID = <10331> Status = 0 0 0 0 ok 2008-Apr-30 21:12:18 NOTE WAPPDATA-new_file: New FITS file: wapp.20080430.a2048.0007.fits 2008-Apr-30 21:12:18 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-30 21:12:18 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080430.a2048.0007.fits} 2008-Apr-30 21:12:18 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-30 21:12:18 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-30 21:12:18 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-30 21:12:18 LOG5 end_task: Level: (4) ID = <10331> Status = 0 0 0 0 ok 2008-Apr-30 21:12:18 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-30 21:12:18 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-30 21:12:18 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-30 21:12:18 LOG5 begin_task: Level: (4) ID = <10332> Status = 0 0 0 0 ok 2008-Apr-30 21:12:18 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-30 21:12:18 LOG5 log_alfabeam: Parameters: 12.134388888888889 7.3227499999999983 11.377511 2008.3336989504905 58.899925 2008-Apr-30 21:12:18 LOG4 log_alfabeam: ALFABEAM 0 12.134388888888886 7.322749999999995 2008-Apr-30 21:12:18 LOG4 log_alfabeam: ALFABEAM 1 12.132136555690410 7.420412981348420 2008-Apr-30 21:12:18 LOG4 log_alfabeam: ALFABEAM 2 12.127846542267802 7.355696872553673 2008-Apr-30 21:12:18 LOG4 log_alfabeam: ALFABEAM 3 12.130061978928927 7.257846398237678 2008-Apr-30 21:12:18 LOG4 log_alfabeam: ALFABEAM 4 12.136609887827969 7.224815337566523 2008-Apr-30 21:12:18 LOG4 log_alfabeam: ALFABEAM 5 12.140949619419876 7.290253315773716 2008-Apr-30 21:12:18 LOG4 log_alfabeam: ALFABEAM 6 12.138691709582318 7.388000082489118 2008-Apr-30 21:12:18 INFO2 take_spectra: Starting WAPP scan: 812100117 2008-Apr-30 21:12:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-30 21:12:19 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-30 21:12:19 LOG5 begin_task: Level: (5) ID = <10333> Status = 0 0 0 0 ok 2008-Apr-30 21:12:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-30 21:12:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 4340.00 2008-Apr-30 21:12:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.155402 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-30 21:12:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.155402 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 21:12:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.155402 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 21:12:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.155402 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-30 21:12:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.155402 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 21:12:25 LOG3 WAPP=1+3+4-save_rfcalc: Channel 5: Sky freq = 1381.155402 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 21:12:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.155402 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 21:12:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.155402 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 21:12:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.155402 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 21:12:25 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-30 21:12:25 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-30 21:12:25 LOG5 end_task: Level: (5) ID = <10333> Status = 0 0 0 0 ok 2008-Apr-30 21:12:25 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-30 21:12:25 LOG5 end_task: Level: (4) ID = <10332> Status = 0 0 0 0 ok 2008-Apr-30 21:12:25 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-30 21:12:25 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-30 21:12:25 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-30 21:12:25 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-30 21:12:25 LOG5 begin_task: Level: (4) ID = <10334> Status = 0 0 0 0 ok 2008-Apr-30 21:12:25 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-30 21:12:25 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-30 21:12:25 LOG3 WAPP=2-save_rfcalc: Channel 5: Sky freq = 1381.155402 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 21:12:25 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-30 21:12:25 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-30 21:12:25 LOG5 end_task: Level: (4) ID = <10334> Status = 0 0 0 0 ok 2008-Apr-30 21:12:25 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-30 21:12:25 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-30 21:12:25 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-30 21:12:25 LOG5 begin_task: Level: (4) ID = <10335> Status = 0 0 0 0 ok 2008-Apr-30 21:12:25 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-30 21:12:25 LOG5 log_alfabeam: Parameters: 12.134388888888889 7.3227499999999983 11.379461 2008.3336991723072 58.899925 2008-Apr-30 21:12:25 LOG4 log_alfabeam: ALFABEAM 0 12.134388888888886 7.322749999999998 2008-Apr-30 21:12:25 LOG4 log_alfabeam: ALFABEAM 1 12.132144605252380 7.420453903351099 2008-Apr-30 21:12:25 LOG4 log_alfabeam: ALFABEAM 2 12.127849281011947 7.355816775861287 2008-Apr-30 21:12:25 LOG4 log_alfabeam: ALFABEAM 3 12.130056604671610 7.257925795612794 2008-Apr-30 21:12:25 LOG4 log_alfabeam: ALFABEAM 4 12.136601778112970 7.224774625312989 2008-Apr-30 21:12:25 LOG4 log_alfabeam: ALFABEAM 5 12.140946942699234 7.290133713176907 2008-Apr-30 21:12:25 LOG4 log_alfabeam: ALFABEAM 6 12.138697079038872 7.387921606936943 2008-Apr-30 21:12:25 INFO2 take_spectra: Starting WAPP scan: 812100118 2008-Apr-30 21:12:26 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-30 21:12:26 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-30 21:12:26 LOG5 begin_task: Level: (5) ID = <10336> Status = 0 0 0 0 ok 2008-Apr-30 21:12:26 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-30 21:12:26 INFO1 WAPP=1+2+3+4-start_spectra: start sec 4347.00 2008-Apr-30 21:12:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.536 > 1.4)! 2008-Apr-30 21:12:31 LOG4 check_wapp_levels: WAPP-1 power levels: 1.261 1.136 1.200 1.463 2008-Apr-30 21:12:31 LOG4 check_wapp_levels: WAPP-2 power levels: 1.434 1.327 1.363 1.436 2008-Apr-30 21:12:31 LOG4 check_wapp_levels: WAPP-3 power levels: 1.322 1.349 1.426 1.241 2008-Apr-30 21:12:31 LOG4 check_wapp_levels: WAPP-4 power levels: 1.415 1.431 1.536 1.273 2008-Apr-30 21:12:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.155402 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-30 21:12:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.155402 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 21:12:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.155402 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 21:12:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.155402 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-30 21:12:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.155402 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 21:12:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.155402 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 21:12:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.155402 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 21:12:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.155402 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 21:12:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.155402 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 21:12:32 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-30 21:12:32 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-30 21:12:32 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-30 21:12:32 LOG5 end_task: Level: (5) ID = <10336> Status = 0 0 0 0 ok 2008-Apr-30 21:12:32 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-30 21:12:32 LOG5 end_task: Level: (4) ID = <10335> Status = 0 0 0 0 ok 2008-Apr-30 21:12:32 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-30 21:12:32 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-30 21:12:32 LOG5 finish_task: Level: (3) ID = <10326> Status = 0 0 0 0 ok 2008-Apr-30 21:12:32 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-30 21:12:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 21:12:32 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-30 21:12:32 LOG5 end_task: Level: (3) ID = <10326> Status = 0 0 0 0 ok 2008-Apr-30 21:12:32 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-30 21:12:32 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 313.22 and ZA = 15.75 2008-Apr-30 21:12:32 LOG3 track_source: Calling 'track_source AGESVC1A_p2_068 313.22 15.7483079031 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-30 21:12:32 START begin_task: Starting task 'sending tracking commands' 2008-Apr-30 21:12:32 LOG5 begin_task: Level: (3) ID = <10337> Status = 0 0 0 0 ok 2008-Apr-30 21:12:32 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_068} INFO {Slewing to source 'AGESVC1A_p2_068' ...} 2008-Apr-30 21:12:32 INFO1 track_source: Starting to track AGESVC1A_p2_068 2008-Apr-30 21:12:32 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_068" 2008-Apr-30 21:12:32 LOG3 vw_send: To DATATAKING: set ra 313.22 2008-Apr-30 21:12:32 LOG3 vw_send: To DATATAKING: set dec 15.7483079031 2008-Apr-30 21:12:32 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-30 21:12:32 LOG3 vw_send: To DATATAKING: pnt tr 313.22 15.7483079031 -CF 2008-Apr-30 21:12:32 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-30 21:12:32 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-30 21:12:32 LOG5 finish_task: Level: (3) ID = <10337> Status = 0 0 0 0 ok 2008-Apr-30 21:12:32 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-30 21:12:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 21:12:33 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-30 21:12:33 LOG5 end_task: Level: (3) ID = <10337> Status = 0 0 0 0 ok 2008-Apr-30 21:12:33 LOG1 fixed_driftmap: Parameters: HA = -00:46:00.3 Start = 11:23:26.8 LST = 11:22:53.1 diff = 33.7 secs 2008-Apr-30 21:12:33 INFO2 fixed_driftmap: Waiting 31.7 seconds for RA 12:09:27 2008-Apr-30 21:12:33 INFO2 lstwait: Waiting for 31.6 secs from LST 11:22:53 to LST 11:23:25 ... 2008-Apr-30 21:12:33 LOG4 send_obs_status: To obs_status: <1> TASKTIME 31.638911718905874 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-30 21:12:33 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-30 21:12:33 LOG5 begin_task: Level: (3) ID = <10338> Status = 0 0 0 0 ok 2008-Apr-30 21:12:33 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_068" 2008-Apr-30 21:12:33 LOG4 got_cormsg: From DATATAKING: set ra 313.22 2008-Apr-30 21:12:33 LOG4 got_cormsg: From DATATAKING: set dec 15.7483079031 2008-Apr-30 21:12:33 LOG4 got_cormsg: From DATATAKING: vw% 313.22 2008-Apr-30 21:12:33 LOG4 got_cormsg: From DATATAKING: vw% 15.7483079031 2008-Apr-30 21:12:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 21:12:33 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-30 21:12:33 LOG4 got_cormsg: From DATATAKING: pnt tr 313.22 15.7483079031 -CF 2008-Apr-30 21:12:33 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-30 21:12:33 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-30 21:12:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 21:12:37 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.893 and 1.098 2008-Apr-30 21:13:04 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-30 21:13:04 LOG5 end_task: Level: (3) ID = <10338> Status = 0 0 0 0 ok 2008-Apr-30 21:13:04 LOG4 lstwait: Finished waiting, the gui caused difference: 0.36126488000149948 2008-Apr-30 21:13:04 INFO3 lstwait: Finished waiting 2008-Apr-30 21:13:04 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-30 21:13:04 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-30 21:13:04 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-30 21:13:04 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-30 21:13:04 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-30 21:13:04 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-30 21:13:04 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-30 21:13:04 LOG5 begin_task: Level: (3) ID = <10339> Status = 0 0 0 0 ok 2008-Apr-30 21:13:04 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-30 21:13:04 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-30 21:13:04 INFO2 take_spectra: Starting WAPP scan: 812100119 2008-Apr-30 21:13:05 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-30 21:13:05 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-30 21:13:05 LOG5 begin_task: Level: (4) ID = <10340> Status = 0 0 0 0 ok 2008-Apr-30 21:13:05 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-30 21:13:05 INFO1 WAPP=1+2+3+4-start_spectra: start sec 4386.00 2008-Apr-30 21:13:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.155402 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-30 21:13:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.155402 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 21:13:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.155402 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 21:13:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.155402 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-30 21:13:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.155402 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 21:13:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.155402 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 21:13:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.155402 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 21:13:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.155402 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 21:13:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.155402 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 21:28:50 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 21:28:50.303 (seconds: 77330.303)!} 2008-Apr-30 21:28:50 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 21:28:50.303 (seconds: 77330.303)! 2008-Apr-30 21:28:51 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 77329.0 to 77330.0! 2008-Apr-30 21:28:52 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (77329.0 - 77331.0)! 2008-Apr-30 21:31:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (7.004 > 1.4)! 2008-Apr-30 21:31:14 LOG4 check_wapp_levels: WAPP-1 power levels: 0.925 7.004 0.899 1.098 2008-Apr-30 21:31:14 LOG4 check_wapp_levels: WAPP-2 power levels: 1.083 0.977 1.019 1.068 2008-Apr-30 21:31:14 LOG4 check_wapp_levels: WAPP-3 power levels: 0.971 0.995 1.052 0.949 2008-Apr-30 21:31:14 LOG4 check_wapp_levels: WAPP-4 power levels: 1.025 1.046 1.117 0.931 2008-Apr-30 21:31:16 INFO5 check_wapp_levels: WAPP power levels are between 0.898 and 6.994 (still bad) 2008-Apr-30 21:31:18 INFO5 check_wapp_levels: WAPP power levels are between 0.898 and 7.001 (still bad) 2008-Apr-30 21:31:20 INFO5 check_wapp_levels: WAPP power levels are between 0.898 and 7.005 (still bad) 2008-Apr-30 21:31:22 INFO5 check_wapp_levels: WAPP power levels are between 0.898 and 7.013 (still bad) 2008-Apr-30 21:31:24 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 7.002 (still bad) 2008-Apr-30 21:31:26 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 7.005 (still bad) 2008-Apr-30 21:31:28 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 7.003 (still bad) 2008-Apr-30 21:31:30 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 7.009 (still bad) 2008-Apr-30 21:31:32 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 6.991 (still bad) 2008-Apr-30 21:31:34 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 6.992 (still bad) 2008-Apr-30 21:31:36 INFO5 check_wapp_levels: WAPP power levels are between 0.894 and 6.994 (still bad) 2008-Apr-30 21:31:38 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 7.000 (still bad) 2008-Apr-30 21:31:40 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 6.992 (still bad) 2008-Apr-30 21:31:42 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 7.000 (still bad) 2008-Apr-30 21:31:44 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 6.999 (still bad) 2008-Apr-30 21:31:46 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 6.997 (still bad) 2008-Apr-30 21:31:48 INFO5 check_wapp_levels: WAPP power levels are between 0.898 and 7.017 (still bad) 2008-Apr-30 21:31:50 INFO5 check_wapp_levels: WAPP power levels are between 0.899 and 7.004 (still bad) 2008-Apr-30 21:31:52 INFO5 check_wapp_levels: WAPP power levels are between 0.900 and 7.010 (still bad) 2008-Apr-30 21:31:54 INFO5 check_wapp_levels: WAPP power levels are between 0.899 and 7.023 (still bad) 2008-Apr-30 21:31:56 INFO5 check_wapp_levels: WAPP power levels are between 0.899 and 7.027 (still bad) 2008-Apr-30 21:31:58 INFO5 check_wapp_levels: WAPP power levels are between 0.902 and 7.036 (still bad) 2008-Apr-30 21:32:00 INFO5 check_wapp_levels: WAPP power levels are between 0.909 and 7.033 (still bad) 2008-Apr-30 21:32:02 INFO5 check_wapp_levels: WAPP power levels are between 0.922 and 7.028 (still bad) 2008-Apr-30 21:32:04 INFO5 check_wapp_levels: WAPP power levels are between 0.921 and 7.017 (still bad) 2008-Apr-30 21:32:06 INFO5 check_wapp_levels: WAPP power levels are between 0.922 and 7.018 (still bad) 2008-Apr-30 21:32:08 INFO5 check_wapp_levels: WAPP power levels are between 0.920 and 7.012 (still bad) 2008-Apr-30 21:32:10 INFO5 check_wapp_levels: WAPP power levels are between 0.921 and 7.017 (still bad) 2008-Apr-30 21:32:12 INFO5 check_wapp_levels: WAPP power levels are between 0.921 and 7.029 (still bad) 2008-Apr-30 21:32:14 INFO5 check_wapp_levels: WAPP power levels are between 0.924 and 7.021 (still bad) 2008-Apr-30 21:32:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (7.016 > 1.4)! 2008-Apr-30 21:32:16 LOG4 check_wapp_levels: WAPP-1 power levels: 0.923 7.016 0.997 1.219 2008-Apr-30 21:32:16 LOG4 check_wapp_levels: WAPP-2 power levels: 1.085 0.982 1.019 1.067 2008-Apr-30 21:32:16 LOG4 check_wapp_levels: WAPP-3 power levels: 0.970 0.993 1.052 0.947 2008-Apr-30 21:32:16 LOG4 check_wapp_levels: WAPP-4 power levels: 1.024 1.046 1.116 0.930 2008-Apr-30 21:32:18 INFO5 check_wapp_levels: WAPP power levels are between 0.921 and 7.025 (still bad) 2008-Apr-30 21:32:20 INFO5 check_wapp_levels: WAPP power levels are between 0.923 and 7.013 (still bad) 2008-Apr-30 21:32:22 INFO5 check_wapp_levels: WAPP power levels are between 0.925 and 7.012 (still bad) 2008-Apr-30 21:32:24 INFO5 check_wapp_levels: WAPP power levels are between 0.910 and 7.013 (still bad) 2008-Apr-30 21:32:26 INFO5 check_wapp_levels: WAPP power levels are between 0.900 and 7.004 (still bad) 2008-Apr-30 21:32:28 INFO5 check_wapp_levels: WAPP power levels are between 0.898 and 7.014 (still bad) 2008-Apr-30 21:32:30 INFO5 check_wapp_levels: WAPP power levels are between 0.898 and 7.020 (still bad) 2008-Apr-30 21:32:32 INFO5 check_wapp_levels: WAPP power levels are between 0.899 and 7.009 (still bad) 2008-Apr-30 21:32:35 INFO5 check_wapp_levels: WAPP power levels are between 0.900 and 7.014 (still bad) 2008-Apr-30 21:32:37 INFO5 check_wapp_levels: WAPP power levels are between 0.899 and 7.005 (still bad) 2008-Apr-30 21:32:39 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 7.013 (still bad) 2008-Apr-30 21:32:41 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 7.001 (still bad) 2008-Apr-30 21:32:43 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 6.999 (still bad) 2008-Apr-30 21:32:45 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 7.006 (still bad) 2008-Apr-30 21:32:47 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 6.987 (still bad) 2008-Apr-30 21:32:49 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 7.002 (still bad) 2008-Apr-30 21:32:51 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 6.991 (still bad) 2008-Apr-30 21:32:53 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 6.977 (still bad) 2008-Apr-30 21:32:55 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 6.982 (still bad) 2008-Apr-30 21:32:57 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 6.988 (still bad) 2008-Apr-30 21:32:59 INFO5 check_wapp_levels: WAPP power levels are between 0.894 and 7.001 (still bad) 2008-Apr-30 21:33:01 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 6.992 (still bad) 2008-Apr-30 21:33:03 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 7.015 (still bad) 2008-Apr-30 21:33:05 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 7.005 (still bad) 2008-Apr-30 21:33:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-30 21:33:06 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-30 21:33:06 LOG5 end_task: Level: (4) ID = <10340> Status = 0 0 0 0 ok 2008-Apr-30 21:33:06 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-30 21:33:06 LOG5 end_task: Level: (3) ID = <10339> Status = 0 0 0 0 ok 2008-Apr-30 21:33:06 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-30 21:33:06 LOG5 finish_task: Level: (2) ID = <10306> Status = 0 0 0 0 ok 2008-Apr-30 21:33:06 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-30 21:33:06 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-30 21:33:06 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-30 21:33:06 LOG5 end_task: Level: (2) ID = <10306> Status = 0 0 0 0 ok 2008-Apr-30 21:33:06 COMMAND run_command_line: EXECUTING command 35: 'FIXEDDRIFT az=332.56 alfaangle=41.9 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_070 ra=120900.00 dec=71630.00' 2008-Apr-30 21:33:06 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-30 21:33:07 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-30 21:33:07 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 332.56 41.9 hcorcal 5 tracking no first 1 AGESVC1A_p2_070 120900.00 71630.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-30 21:33:07 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-30 21:33:07 LOG5 begin_task: Level: (2) ID = <10341> Status = 0 0 0 0 ok 2008-Apr-30 21:33:07 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGESVC1A_p2_068' 2008-Apr-30 21:33:07 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-30 21:33:07 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1A_p2_070} 2008-Apr-30 21:33:07 INFO3 fixed_driftmap: Sending telescope to Az = 332.56 and ZA = 12.46 2008-Apr-30 21:33:07 LOG3 track_source: Calling 'track_source AGESVC1A_p2_070 332.56 12.4557752690 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-30 21:33:07 START begin_task: Starting task 'sending tracking commands' 2008-Apr-30 21:33:07 LOG5 begin_task: Level: (3) ID = <10342> Status = 0 0 0 0 ok 2008-Apr-30 21:33:07 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_070} INFO {Slewing to source 'AGESVC1A_p2_070' ...} 2008-Apr-30 21:33:07 INFO1 track_source: Starting to track AGESVC1A_p2_070 2008-Apr-30 21:33:07 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_070" 2008-Apr-30 21:33:07 LOG3 vw_send: To DATATAKING: set ra 332.56 2008-Apr-30 21:33:07 LOG3 vw_send: To DATATAKING: set dec 12.4557752690 2008-Apr-30 21:33:07 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-30 21:33:07 LOG3 vw_send: To DATATAKING: pnt tr 332.56 12.4557752690 -CF 2008-Apr-30 21:33:07 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-30 21:33:07 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-30 21:33:07 LOG5 finish_task: Level: (3) ID = <10342> Status = 0 0 0 0 ok 2008-Apr-30 21:33:07 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-30 21:33:07 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 21:33:07 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-30 21:33:07 LOG5 end_task: Level: (3) ID = <10342> Status = 0 0 0 0 ok 2008-Apr-30 21:33:07 START begin_task: Starting task 'rotate ALFA to +41.9 degrees' 2008-Apr-30 21:33:07 LOG5 begin_task: Level: (3) ID = <10343> Status = 0 0 0 0 ok 2008-Apr-30 21:33:07 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +41.9 degrees ...} 2008-Apr-30 21:33:07 INFO2 rotate_alfa: ALFA commanded to +41.9 degrees 2008-Apr-30 21:33:07 LOG3 sock_errsend: To ALFAMOTOR: POSITION 41.9 REPLY 2008-Apr-30 21:33:07 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-30 21:33:07 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-30 21:33:07 LOG5 begin_task: Level: (4) ID = <10344> Status = 0 0 0 0 ok 2008-Apr-30 21:33:07 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_070" 2008-Apr-30 21:33:07 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 7.005 (still bad) 2008-Apr-30 21:33:07 LOG4 got_cormsg: From DATATAKING: set ra 332.56 2008-Apr-30 21:33:07 LOG4 got_cormsg: From DATATAKING: set dec 12.4557752690 2008-Apr-30 21:33:07 LOG4 got_cormsg: From DATATAKING: vw% 332.56 2008-Apr-30 21:33:07 LOG4 got_cormsg: From DATATAKING: vw% 12.4557752690 2008-Apr-30 21:33:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 21:33:07 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-30 21:33:07 LOG4 got_cormsg: From DATATAKING: pnt tr 332.56 12.4557752690 -CF 2008-Apr-30 21:33:07 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-30 21:33:07 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-30 21:33:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 21:33:18 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-30 21:33:18 INFO3 alfa_motor: ALFA rotator in-position +41.90 degrees 2008-Apr-30 21:33:18 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-30 21:33:18 LOG5 end_task: Level: (4) ID = <10344> Status = 0 0 0 0 ok 2008-Apr-30 21:33:18 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-30 21:33:18 STOP finish_task: Finishing task 'rotate ALFA to +41.9 degrees' 2008-Apr-30 21:33:18 LOG5 finish_task: Level: (3) ID = <10343> Status = 0 0 0 0 ok 2008-Apr-30 21:33:18 INFO2 finish_task: DONE finished configuration: rotating ALFA to +41.9 degrees 2008-Apr-30 21:33:18 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 21:33:18 STOP end_task: Finishing task 'rotate ALFA to +41.9 degrees' with status 'OK' 2008-Apr-30 21:33:18 LOG5 end_task: Level: (3) ID = <10343> Status = 0 0 0 0 ok 2008-Apr-30 21:33:18 START begin_task: Starting task 'waiting on telescope' 2008-Apr-30 21:33:18 LOG5 begin_task: Level: (3) ID = <10345> Status = 0 0 0 0 ok 2008-Apr-30 21:33:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-30 21:33:18 LOG3 waittrk: Start waittrk 5 2008-Apr-30 21:33:18 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-30 21:33:18 LOG5 begin_task: Level: (4) ID = <10346> Status = 0 0 0 0 ok 2008-Apr-30 21:33:23 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-30 21:33:23 LOG5 end_task: Level: (4) ID = <10346> Status = 0 0 0 0 ok 2008-Apr-30 21:33:23 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-30 21:33:23 LOG5 begin_task: Level: (4) ID = <10347> Status = 0 0 0 0 ok 2008-Apr-30 21:34:36 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-30 21:34:36 LOG5 end_task: Level: (4) ID = <10347> Status = 0 0 0 0 ok 2008-Apr-30 21:34:36 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-30 21:34:36 INFO2 waittrk: Now tracking AGESVC1A_p2_070 2008-Apr-30 21:34:36 LOG4 waittrk: Current telescope position: Az = 332.17 ZA = 12.44 2008-Apr-30 21:34:36 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-30 21:34:36 LOG5 finish_task: Level: (3) ID = <10345> Status = 0 0 0 0 ok 2008-Apr-30 21:34:36 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-30 21:34:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 21:34:36 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-30 21:34:36 LOG5 end_task: Level: (3) ID = <10345> Status = 0 0 0 0 ok 2008-Apr-30 21:34:36 START begin_task: Starting task 'selecting calibration type' 2008-Apr-30 21:34:36 LOG5 begin_task: Level: (3) ID = <10348> Status = 0 0 0 0 ok 2008-Apr-30 21:34:36 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-30 21:34:36 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-30 21:34:36 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 21:34:36 START begin_task: Starting task 'waiting on setcal' 2008-Apr-30 21:34:36 LOG5 begin_task: Level: (4) ID = <10349> Status = 0 0 0 0 ok 2008-Apr-30 21:34:36 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-30 21:34:36 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 21:34:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 21:34:37 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-30 21:34:37 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-30 21:34:37 LOG5 end_task: Level: (4) ID = <10349> Status = 0 0 0 0 ok 2008-Apr-30 21:34:37 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-30 21:34:37 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-30 21:34:37 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-30 21:34:37 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-30 21:34:37 LOG5 begin_task: Level: (4) ID = <10350> Status = 0 0 0 0 ok 2008-Apr-30 21:34:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 21:34:38 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-30 21:34:38 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-30 21:34:38 LOG5 end_task: Level: (4) ID = <10350> Status = 0 0 0 0 ok 2008-Apr-30 21:34:38 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-30 21:34:38 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-30 21:34:38 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-30 21:34:38 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-30 21:34:38 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-30 21:34:38 LOG5 begin_task: Level: (4) ID = <10351> Status = 0 0 0 0 ok 2008-Apr-30 21:34:39 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-30 21:34:39 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-30 21:34:39 LOG5 end_task: Level: (4) ID = <10351> Status = 0 0 0 0 ok 2008-Apr-30 21:34:39 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-30 21:34:39 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-30 21:34:39 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-30 21:34:39 LOG5 finish_task: Level: (3) ID = <10348> Status = 0 0 0 0 ok 2008-Apr-30 21:34:39 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-30 21:34:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 21:34:39 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-30 21:34:39 LOG5 end_task: Level: (3) ID = <10348> Status = 0 0 0 0 ok 2008-Apr-30 21:34:39 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2008-Apr-30 21:34:39 INFO2 astwait: Waiting for 23 seconds from 01:34:39 to 01:35:02 UTC ... 2008-Apr-30 21:34:39 LOG4 send_obs_status: To obs_status: <1> TASKTIME 23 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-30 21:34:39 START begin_task: Starting task 'waiting on waiting for AST time' 2008-Apr-30 21:34:39 LOG5 begin_task: Level: (3) ID = <10352> Status = 0 0 0 0 ok 2008-Apr-30 21:35:02 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2008-Apr-30 21:35:02 LOG5 end_task: Level: (3) ID = <10352> Status = 0 0 0 0 ok 2008-Apr-30 21:35:02 INFO3 astwait: Finished waiting 2008-Apr-30 21:35:02 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-30 21:35:02 LOG5 dopset_later: Calling 'dopset_later 61.198184510275993' 2008-Apr-30 21:35:02 INFO3 dopset_later: Setting Doppler correction for 21:36:02 (61.2 seconds from now) 2008-Apr-30 21:35:02 LOG5 antvel: Calling 'antvel 332.560000 12.455775 F 61.198184510275993' 2008-Apr-30 21:35:02 LOG2 antvel: Parameters to Doppler: Heliocentric 92162 2008 121 0.0 2008-Apr-30 21:35:02 INFO5 antvel: Computed antenna velocity: +19.15063 km/s 2008-Apr-30 21:35:02 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=19.150632366699998 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-30 21:35:02 INFO4 dopset_gen: New sky frequencies: 1381.155201 1381.155201 1381.155201 1381.155201 1381.155201 1381.155201 1381.155201 1381.155201 1381.155201 2008-Apr-30 21:35:02 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.155201 sky0=1381.155201 sky1=1381.155201 sky2=1381.155201 sky3=1381.155201 sky4=1381.155201 sky5=1381.155201 sky6=1381.155201 sky7=1381.155201 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-30 21:35:02 LOG2 dopset_gen: Result from 'sky2syn': 1631.155201 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-30 21:35:02 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631155201.0} 2008-Apr-30 21:35:02 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 21:35:02 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-30 21:35:02 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-30 21:35:02 INFO5 fixed_driftmap: Tracking J2000 position: RA = 12:08:03.2 Dec = +07:16:21.9 2008-Apr-30 21:35:02 LOG3 track_source: Calling 'track_source AGESVC1A_p2_070 120803.2 071621.9 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-30 21:35:02 START begin_task: Starting task 'sending tracking commands' 2008-Apr-30 21:35:02 LOG5 begin_task: Level: (3) ID = <10353> Status = 0 0 0 0 ok 2008-Apr-30 21:35:02 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_070} INFO {Slewing to source 'AGESVC1A_p2_070' ...} 2008-Apr-30 21:35:02 INFO1 track_source: Starting to track AGESVC1A_p2_070 2008-Apr-30 21:35:02 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_070" 2008-Apr-30 21:35:02 LOG3 vw_send: To DATATAKING: set ra 120803.2 2008-Apr-30 21:35:02 LOG3 vw_send: To DATATAKING: set dec 071621.9 2008-Apr-30 21:35:02 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-30 21:35:02 LOG3 vw_send: To DATATAKING: pnt tr 120803.2 071621.9 -CJ 2008-Apr-30 21:35:02 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-30 21:35:02 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-30 21:35:02 LOG5 finish_task: Level: (3) ID = <10353> Status = 0 0 0 0 ok 2008-Apr-30 21:35:02 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-30 21:35:02 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 21:35:02 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-30 21:35:02 LOG5 end_task: Level: (3) ID = <10353> Status = 0 0 0 0 ok 2008-Apr-30 21:35:02 START begin_task: Starting task 'waiting on telescope' 2008-Apr-30 21:35:02 LOG5 begin_task: Level: (3) ID = <10354> Status = 0 0 0 0 ok 2008-Apr-30 21:35:02 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-30 21:35:02 LOG3 waittrk: Start waittrk 5 2008-Apr-30 21:35:02 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-30 21:35:02 LOG5 begin_task: Level: (4) ID = <10355> Status = 0 0 0 0 ok 2008-Apr-30 21:35:02 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631155201.0} 2008-Apr-30 21:35:02 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 21:35:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 21:35:02 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_070" 2008-Apr-30 21:35:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 21:35:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 21:35:02 LOG4 got_cormsg: From DATATAKING: set ra 120803.2 2008-Apr-30 21:35:02 LOG4 got_cormsg: From DATATAKING: set dec 071621.9 2008-Apr-30 21:35:02 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-30 21:35:02 LOG4 got_cormsg: From DATATAKING: pnt tr 120803.2 071621.9 -CJ 2008-Apr-30 21:35:02 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-30 21:35:02 LOG4 got_cormsg: From DATATAKING: 120803.2 2008-Apr-30 21:35:02 LOG4 got_cormsg: From DATATAKING: vw% 071621.9 2008-Apr-30 21:35:02 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2008-Apr-30 21:35:07 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-30 21:35:07 LOG5 end_task: Level: (4) ID = <10355> Status = 0 0 0 0 ok 2008-Apr-30 21:35:07 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-30 21:35:07 LOG5 begin_task: Level: (4) ID = <10356> Status = 0 0 0 0 ok 2008-Apr-30 21:35:09 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-30 21:35:09 LOG5 end_task: Level: (4) ID = <10356> Status = 0 0 0 0 ok 2008-Apr-30 21:35:09 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-30 21:35:09 INFO2 waittrk: Now tracking AGESVC1A_p2_070 2008-Apr-30 21:35:09 LOG4 waittrk: Current telescope position: Az = 332.25 ZA = 12.43 2008-Apr-30 21:35:09 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-30 21:35:09 LOG5 finish_task: Level: (3) ID = <10354> Status = 0 0 0 0 ok 2008-Apr-30 21:35:09 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-30 21:35:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 21:35:09 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-30 21:35:09 LOG5 end_task: Level: (3) ID = <10354> Status = 0 0 0 0 ok 2008-Apr-30 21:35:09 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-30 21:35:09 LOG5 begin_task: Level: (3) ID = <10357> Status = 0 0 0 0 ok 2008-Apr-30 21:35:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-30 21:35:09 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-30 21:35:09 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-30 21:35:09 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-30 21:35:09 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 21:35:09 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-30 21:35:09 LOG5 begin_task: Level: (4) ID = <10358> Status = 0 0 0 0 ok 2008-Apr-30 21:35:09 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-30 21:35:09 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 21:35:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 21:35:12 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-30 21:35:12 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-30 21:35:12 LOG5 end_task: Level: (4) ID = <10358> Status = 0 0 0 0 ok 2008-Apr-30 21:35:12 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-30 21:35:12 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-30 21:35:12 LOG5 begin_task: Level: (4) ID = <10359> Status = 0 0 0 0 ok 2008-Apr-30 21:35:12 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-30 21:35:12 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-30 21:35:12 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-30 21:35:12 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-30 21:35:12 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-30 21:35:12 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-30 21:35:12 LOG5 begin_task: Level: (5) ID = <10360> Status = 0 0 0 0 ok 2008-Apr-30 21:35:12 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-30 21:35:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 21:35:13 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 9 dB --- beam 1: 7 6 dB 2008-Apr-30 21:35:13 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 5 dB 2008-Apr-30 21:35:13 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-30 21:35:13 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 2 3 dB 2008-Apr-30 21:35:13 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-30 21:35:13 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-30 21:35:13 LOG5 end_task: Level: (5) ID = <10360> Status = 0 0 0 0 ok 2008-Apr-30 21:35:13 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.894 1.054 ALFA beam 1: 1.138 1.083 2008-Apr-30 21:35:13 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.039 0.939 ALFA beam 3: 0.964 1.028 2008-Apr-30 21:35:13 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.906 0.943 ALFA beam 5: 0.988 1.139 2008-Apr-30 21:35:13 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.001 1.012 ALFA beam 7: 1.091 0.901 2008-Apr-30 21:35:13 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-30 21:35:13 LOG5 finish_task: Level: (4) ID = <10359> Status = 0 0 0 0 ok 2008-Apr-30 21:35:13 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-30 21:35:13 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 21:35:13 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-30 21:35:13 LOG5 end_task: Level: (4) ID = <10359> Status = 0 0 0 0 ok 2008-Apr-30 21:35:13 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-30 21:35:13 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-30 21:35:13 LOG5 finish_task: Level: (3) ID = <10357> Status = 0 0 0 0 ok 2008-Apr-30 21:35:13 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-30 21:35:13 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 21:35:13 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-30 21:35:13 LOG5 end_task: Level: (3) ID = <10357> Status = 0 0 0 0 ok 2008-Apr-30 21:35:13 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 SS 2008-Apr-30 21:35:13 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 SS 2008-Apr-30 21:35:13 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 SS 2008-Apr-30 21:35:13 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 SS 2008-Apr-30 21:35:13 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-30 21:35:13 START begin_task: Starting task 'WAPP calibration' 2008-Apr-30 21:35:13 LOG5 begin_task: Level: (3) ID = <10361> Status = 0 0 0 0 ok 2008-Apr-30 21:35:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-30 21:35:13 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-30 21:35:13 START begin_task: Starting task 'selecting calibration type' 2008-Apr-30 21:35:13 LOG5 begin_task: Level: (4) ID = <10362> Status = 0 0 0 0 ok 2008-Apr-30 21:35:13 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-30 21:35:13 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-30 21:35:13 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 21:35:13 START begin_task: Starting task 'waiting on setcal' 2008-Apr-30 21:35:13 LOG5 begin_task: Level: (5) ID = <10363> Status = 0 0 0 0 ok 2008-Apr-30 21:35:13 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 SS' 2008-Apr-30 21:35:13 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-30 21:35:13 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 21:35:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 21:35:14 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-30 21:35:14 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-30 21:35:14 LOG5 end_task: Level: (5) ID = <10363> Status = 0 0 0 0 ok 2008-Apr-30 21:35:14 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-30 21:35:14 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-30 21:35:14 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-30 21:35:14 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-30 21:35:14 LOG5 begin_task: Level: (5) ID = <10364> Status = 0 0 0 0 ok 2008-Apr-30 21:35:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 21:35:14 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-30 21:35:14 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-30 21:35:14 LOG5 end_task: Level: (5) ID = <10364> Status = 0 0 0 0 ok 2008-Apr-30 21:35:14 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-30 21:35:14 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-30 21:35:14 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-30 21:35:14 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-30 21:35:14 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-30 21:35:14 LOG5 begin_task: Level: (5) ID = <10365> Status = 0 0 0 0 ok 2008-Apr-30 21:35:14 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-30 21:35:14 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-30 21:35:14 LOG5 end_task: Level: (5) ID = <10365> Status = 0 0 0 0 ok 2008-Apr-30 21:35:14 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-30 21:35:14 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-30 21:35:14 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-30 21:35:14 LOG5 finish_task: Level: (4) ID = <10362> Status = 0 0 0 0 ok 2008-Apr-30 21:35:14 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-30 21:35:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 21:35:14 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-30 21:35:14 LOG5 end_task: Level: (4) ID = <10362> Status = 0 0 0 0 ok 2008-Apr-30 21:35:14 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-30 21:35:14 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-30 21:35:14 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-30 21:35:14 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-30 21:35:14 LOG5 begin_task: Level: (4) ID = <10366> Status = 0 0 0 0 ok 2008-Apr-30 21:35:14 NOTE WAPPDATA-new_file: New FITS file: wapp.20080430.a2048.0008.fits 2008-Apr-30 21:35:14 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-30 21:35:14 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080430.a2048.0008.fits} 2008-Apr-30 21:35:14 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-30 21:35:14 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-30 21:35:14 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-30 21:35:14 LOG5 end_task: Level: (4) ID = <10366> Status = 0 0 0 0 ok 2008-Apr-30 21:35:14 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-30 21:35:14 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-30 21:35:14 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-30 21:35:14 LOG5 begin_task: Level: (4) ID = <10367> Status = 0 0 0 0 ok 2008-Apr-30 21:35:14 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-30 21:35:14 LOG5 log_alfabeam: Parameters: 12.13422222222222 7.2727499999999985 11.760780 2008.3337425532995 41.899967 2008-Apr-30 21:35:14 LOG4 log_alfabeam: ALFABEAM 0 12.134222222222213 7.272750000000000 2008-Apr-30 21:35:14 LOG4 log_alfabeam: ALFABEAM 1 12.132276021601594 7.374770658058788 2008-Apr-30 21:35:14 LOG4 log_alfabeam: ALFABEAM 2 12.128031380609661 7.307283382168900 2008-Apr-30 21:35:14 LOG4 log_alfabeam: ALFABEAM 3 12.129928074960180 7.205048639378424 2008-Apr-30 21:35:14 LOG4 log_alfabeam: ALFABEAM 4 12.136147905553157 7.170616295393580 2008-Apr-30 21:35:14 LOG4 log_alfabeam: ALFABEAM 5 12.140447664556953 7.238863034678144 2008-Apr-30 21:35:14 LOG4 log_alfabeam: ALFABEAM 6 12.138472537830937 7.340779554861386 2008-Apr-30 21:35:14 INFO2 take_spectra: Starting WAPP scan: 812100120 2008-Apr-30 21:35:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-30 21:35:15 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-30 21:35:15 LOG5 begin_task: Level: (5) ID = <10368> Status = 0 0 0 0 ok 2008-Apr-30 21:35:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-30 21:35:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 5716.00 2008-Apr-30 21:35:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.155201 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-30 21:35:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.155201 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 21:35:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.155201 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 21:35:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.155201 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-30 21:35:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.155201 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 21:35:21 LOG3 WAPP=2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.155201 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 21:35:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.155201 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 21:35:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.155201 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 21:35:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.155201 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 21:35:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-30 21:35:21 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-30 21:35:21 LOG5 end_task: Level: (5) ID = <10368> Status = 0 0 0 0 ok 2008-Apr-30 21:35:21 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-30 21:35:21 LOG5 end_task: Level: (4) ID = <10367> Status = 0 0 0 0 ok 2008-Apr-30 21:35:21 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-30 21:35:21 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-30 21:35:21 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-30 21:35:21 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-30 21:35:21 LOG5 begin_task: Level: (4) ID = <10369> Status = 0 0 0 0 ok 2008-Apr-30 21:35:21 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-30 21:35:21 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-30 21:35:21 LOG3 WAPP=1-save_rfcalc: Channel 5: Sky freq = 1381.155201 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 21:35:21 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-30 21:35:21 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-30 21:35:21 LOG5 end_task: Level: (4) ID = <10369> Status = 0 0 0 0 ok 2008-Apr-30 21:35:21 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-30 21:35:21 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-30 21:35:21 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-30 21:35:21 LOG5 begin_task: Level: (4) ID = <10370> Status = 0 0 0 0 ok 2008-Apr-30 21:35:21 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-30 21:35:21 LOG5 log_alfabeam: Parameters: 12.13422222222222 7.2727499999999985 11.762730 2008.333742775116 41.899967 2008-Apr-30 21:35:21 LOG4 log_alfabeam: ALFABEAM 0 12.134222222222217 7.272750000000004 2008-Apr-30 21:35:21 LOG4 log_alfabeam: ALFABEAM 1 12.132289743897269 7.374828364814145 2008-Apr-30 21:35:21 LOG4 log_alfabeam: ALFABEAM 2 12.128036057068300 7.307468062714524 2008-Apr-30 21:35:21 LOG4 log_alfabeam: ALFABEAM 3 12.129918952136919 7.205176861528931 2008-Apr-30 21:35:21 LOG4 log_alfabeam: ALFABEAM 4 12.136134153370763 7.170559083279429 2008-Apr-30 21:35:21 LOG4 log_alfabeam: ALFABEAM 5 12.140443110720549 7.238678022719093 2008-Apr-30 21:35:21 LOG4 log_alfabeam: ALFABEAM 6 12.138481658910912 7.340652994545207 2008-Apr-30 21:35:21 INFO2 take_spectra: Starting WAPP scan: 812100121 2008-Apr-30 21:35:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-30 21:35:22 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-30 21:35:22 LOG5 begin_task: Level: (5) ID = <10371> Status = 0 0 0 0 ok 2008-Apr-30 21:35:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-30 21:35:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 5723.00 2008-Apr-30 21:35:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.537 > 1.4)! 2008-Apr-30 21:35:27 LOG4 check_wapp_levels: WAPP-1 power levels: 1.231 1.472 1.537 1.458 2008-Apr-30 21:35:27 LOG4 check_wapp_levels: WAPP-2 power levels: 1.406 1.289 1.334 1.411 2008-Apr-30 21:35:27 LOG4 check_wapp_levels: WAPP-3 power levels: 1.265 1.314 1.381 1.528 2008-Apr-30 21:35:27 LOG4 check_wapp_levels: WAPP-4 power levels: 1.409 1.411 1.534 1.257 2008-Apr-30 21:35:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.155201 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-30 21:35:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.155201 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 21:35:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.155201 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 21:35:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.155201 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-30 21:35:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.155201 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 21:35:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.155201 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 21:35:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.155201 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 21:35:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.155201 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 21:35:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.155201 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 21:35:28 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-30 21:35:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-30 21:35:28 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-30 21:35:28 LOG5 end_task: Level: (5) ID = <10371> Status = 0 0 0 0 ok 2008-Apr-30 21:35:28 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-30 21:35:28 LOG5 end_task: Level: (4) ID = <10370> Status = 0 0 0 0 ok 2008-Apr-30 21:35:28 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-30 21:35:28 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-30 21:35:28 LOG5 finish_task: Level: (3) ID = <10361> Status = 0 0 0 0 ok 2008-Apr-30 21:35:28 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-30 21:35:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 21:35:28 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-30 21:35:28 LOG5 end_task: Level: (3) ID = <10361> Status = 0 0 0 0 ok 2008-Apr-30 21:35:28 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-30 21:35:28 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 332.56 and ZA = 12.46 2008-Apr-30 21:35:28 LOG3 track_source: Calling 'track_source AGESVC1A_p2_070 332.56 12.4557752690 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-30 21:35:28 START begin_task: Starting task 'sending tracking commands' 2008-Apr-30 21:35:28 LOG5 begin_task: Level: (3) ID = <10372> Status = 0 0 0 0 ok 2008-Apr-30 21:35:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_070} INFO {Slewing to source 'AGESVC1A_p2_070' ...} 2008-Apr-30 21:35:28 INFO1 track_source: Starting to track AGESVC1A_p2_070 2008-Apr-30 21:35:28 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_070" 2008-Apr-30 21:35:28 LOG3 vw_send: To DATATAKING: set ra 332.56 2008-Apr-30 21:35:28 LOG3 vw_send: To DATATAKING: set dec 12.4557752690 2008-Apr-30 21:35:28 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-30 21:35:28 LOG3 vw_send: To DATATAKING: pnt tr 332.56 12.4557752690 -CF 2008-Apr-30 21:35:28 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-30 21:35:28 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-30 21:35:28 LOG5 finish_task: Level: (3) ID = <10372> Status = 0 0 0 0 ok 2008-Apr-30 21:35:28 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-30 21:35:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 21:35:29 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-30 21:35:29 LOG5 end_task: Level: (3) ID = <10372> Status = 0 0 0 0 ok 2008-Apr-30 21:35:29 LOG1 fixed_driftmap: Parameters: HA = -00:23:00.0 Start = 11:46:27.1 LST = 11:45:52.8 diff = 34.3 secs 2008-Apr-30 21:35:29 INFO2 fixed_driftmap: Waiting 32.3 seconds for RA 12:09:27 2008-Apr-30 21:35:29 INFO2 lstwait: Waiting for 32.2 secs from LST 11:45:53 to LST 11:46:25 ... 2008-Apr-30 21:35:29 LOG4 send_obs_status: To obs_status: <1> TASKTIME 32.201972528513693 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-30 21:35:29 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-30 21:35:29 LOG5 begin_task: Level: (3) ID = <10373> Status = 0 0 0 0 ok 2008-Apr-30 21:35:29 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_070" 2008-Apr-30 21:35:29 LOG4 got_cormsg: From DATATAKING: set ra 332.56 2008-Apr-30 21:35:29 LOG4 got_cormsg: From DATATAKING: set dec 12.4557752690 2008-Apr-30 21:35:29 LOG4 got_cormsg: From DATATAKING: vw% 332.56 2008-Apr-30 21:35:29 LOG4 got_cormsg: From DATATAKING: vw% 12.4557752690 2008-Apr-30 21:35:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 21:35:29 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-30 21:35:29 LOG4 got_cormsg: From DATATAKING: pnt tr 332.56 12.4557752690 -CF 2008-Apr-30 21:35:29 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-30 21:35:29 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-30 21:35:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 21:35:33 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.890 and 1.142 2008-Apr-30 21:36:01 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-30 21:36:01 LOG5 end_task: Level: (3) ID = <10373> Status = 0 0 0 0 ok 2008-Apr-30 21:36:01 LOG4 lstwait: Finished waiting, the gui caused difference: 0.79746247999992192 2008-Apr-30 21:36:01 INFO3 lstwait: Finished waiting 2008-Apr-30 21:36:01 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-30 21:36:01 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-30 21:36:01 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-30 21:36:01 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-30 21:36:01 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-30 21:36:01 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-30 21:36:01 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-30 21:36:01 LOG5 begin_task: Level: (3) ID = <10374> Status = 0 0 0 0 ok 2008-Apr-30 21:36:01 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-30 21:36:01 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-30 21:36:01 INFO2 take_spectra: Starting WAPP scan: 812100122 2008-Apr-30 21:36:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-30 21:36:01 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-30 21:36:01 LOG5 begin_task: Level: (4) ID = <10375> Status = 0 0 0 0 ok 2008-Apr-30 21:36:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-30 21:36:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 5762.00 2008-Apr-30 21:36:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.155201 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-30 21:36:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.155201 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 21:36:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.155201 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 21:36:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.155201 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-30 21:36:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.155201 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 21:36:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.155201 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 21:36:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.155201 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 21:36:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.155201 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 21:36:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.155201 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 21:56:02 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-30 21:56:02 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-30 21:56:02 LOG5 end_task: Level: (4) ID = <10375> Status = 0 0 0 0 ok 2008-Apr-30 21:56:02 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-30 21:56:02 LOG5 end_task: Level: (3) ID = <10374> Status = 0 0 0 0 ok 2008-Apr-30 21:56:02 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-30 21:56:02 LOG5 finish_task: Level: (2) ID = <10341> Status = 0 0 0 0 ok 2008-Apr-30 21:56:02 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-30 21:56:02 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-30 21:56:02 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-30 21:56:02 LOG5 end_task: Level: (2) ID = <10341> Status = 0 0 0 0 ok 2008-Apr-30 21:56:02 COMMAND run_command_line: EXECUTING command 39: 'FIXEDDRIFT az=0.00 alfaangle=19.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_072 ra=120900.00 dec=71330.00' 2008-Apr-30 21:56:02 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-30 21:56:03 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-30 21:56:03 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 0.00 19.1 hcorcal 5 tracking no first 1 AGESVC1A_p2_072 120900.00 71330.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-30 21:56:03 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-30 21:56:03 LOG5 begin_task: Level: (2) ID = <10376> Status = 0 0 0 0 ok 2008-Apr-30 21:56:03 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGESVC1A_p2_070' 2008-Apr-30 21:56:03 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-30 21:56:03 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1A_p2_072} 2008-Apr-30 21:56:03 INFO3 fixed_driftmap: Sending telescope to Az = 0.00 and ZA = 11.18 2008-Apr-30 21:56:03 LOG3 track_source: Calling 'track_source AGESVC1A_p2_072 0.00 11.1774330704 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-30 21:56:03 START begin_task: Starting task 'sending tracking commands' 2008-Apr-30 21:56:03 LOG5 begin_task: Level: (3) ID = <10377> Status = 0 0 0 0 ok 2008-Apr-30 21:56:03 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_072} INFO {Slewing to source 'AGESVC1A_p2_072' ...} 2008-Apr-30 21:56:03 INFO1 track_source: Starting to track AGESVC1A_p2_072 2008-Apr-30 21:56:03 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_072" 2008-Apr-30 21:56:03 LOG3 vw_send: To DATATAKING: set ra 0.00 2008-Apr-30 21:56:03 LOG3 vw_send: To DATATAKING: set dec 11.1774330704 2008-Apr-30 21:56:03 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-30 21:56:03 LOG3 vw_send: To DATATAKING: pnt tr 0.00 11.1774330704 -CF 2008-Apr-30 21:56:03 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-30 21:56:03 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-30 21:56:03 LOG5 finish_task: Level: (3) ID = <10377> Status = 0 0 0 0 ok 2008-Apr-30 21:56:03 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-30 21:56:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 21:56:03 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-30 21:56:03 LOG5 end_task: Level: (3) ID = <10377> Status = 0 0 0 0 ok 2008-Apr-30 21:56:03 START begin_task: Starting task 'rotate ALFA to +19.1 degrees' 2008-Apr-30 21:56:03 LOG5 begin_task: Level: (3) ID = <10378> Status = 0 0 0 0 ok 2008-Apr-30 21:56:03 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19.1 degrees ...} 2008-Apr-30 21:56:03 INFO2 rotate_alfa: ALFA commanded to +19.1 degrees 2008-Apr-30 21:56:03 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19.1 REPLY 2008-Apr-30 21:56:03 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-30 21:56:03 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-30 21:56:03 LOG5 begin_task: Level: (4) ID = <10379> Status = 0 0 0 0 ok 2008-Apr-30 21:56:03 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_072" 2008-Apr-30 21:56:03 LOG4 got_cormsg: From DATATAKING: set ra 0.00 2008-Apr-30 21:56:03 LOG4 got_cormsg: From DATATAKING: set dec 11.1774330704 2008-Apr-30 21:56:03 LOG4 got_cormsg: From DATATAKING: vw% 0.00 2008-Apr-30 21:56:03 LOG4 got_cormsg: From DATATAKING: vw% 11.1774330704 2008-Apr-30 21:56:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 21:56:03 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-30 21:56:03 LOG4 got_cormsg: From DATATAKING: pnt tr 0.00 11.1774330704 -CF 2008-Apr-30 21:56:03 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-30 21:56:03 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-30 21:56:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 21:56:17 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-30 21:56:17 INFO3 alfa_motor: ALFA rotator in-position +19.10 degrees 2008-Apr-30 21:56:17 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-30 21:56:17 LOG5 end_task: Level: (4) ID = <10379> Status = 0 0 0 0 ok 2008-Apr-30 21:56:17 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-30 21:56:17 STOP finish_task: Finishing task 'rotate ALFA to +19.1 degrees' 2008-Apr-30 21:56:17 LOG5 finish_task: Level: (3) ID = <10378> Status = 0 0 0 0 ok 2008-Apr-30 21:56:17 INFO2 finish_task: DONE finished configuration: rotating ALFA to +19.1 degrees 2008-Apr-30 21:56:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 21:56:17 STOP end_task: Finishing task 'rotate ALFA to +19.1 degrees' with status 'OK' 2008-Apr-30 21:56:17 LOG5 end_task: Level: (3) ID = <10378> Status = 0 0 0 0 ok 2008-Apr-30 21:56:17 START begin_task: Starting task 'waiting on telescope' 2008-Apr-30 21:56:17 LOG5 begin_task: Level: (3) ID = <10380> Status = 0 0 0 0 ok 2008-Apr-30 21:56:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-30 21:56:17 LOG3 waittrk: Start waittrk 5 2008-Apr-30 21:56:17 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-30 21:56:17 LOG5 begin_task: Level: (4) ID = <10381> Status = 0 0 0 0 ok 2008-Apr-30 21:56:22 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-30 21:56:22 LOG5 end_task: Level: (4) ID = <10381> Status = 0 0 0 0 ok 2008-Apr-30 21:56:22 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-30 21:56:22 LOG5 begin_task: Level: (4) ID = <10382> Status = 0 0 0 0 ok 2008-Apr-30 21:57:24 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-30 21:57:24 LOG5 end_task: Level: (4) ID = <10382> Status = 0 0 0 0 ok 2008-Apr-30 21:57:24 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-30 21:57:24 INFO2 waittrk: Now tracking AGESVC1A_p2_072 2008-Apr-30 21:57:24 LOG4 waittrk: Current telescope position: Az = 359.64 ZA = 11.15 2008-Apr-30 21:57:24 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-30 21:57:24 LOG5 finish_task: Level: (3) ID = <10380> Status = 0 0 0 0 ok 2008-Apr-30 21:57:24 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-30 21:57:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 21:57:24 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-30 21:57:24 LOG5 end_task: Level: (3) ID = <10380> Status = 0 0 0 0 ok 2008-Apr-30 21:57:24 START begin_task: Starting task 'selecting calibration type' 2008-Apr-30 21:57:24 LOG5 begin_task: Level: (3) ID = <10383> Status = 0 0 0 0 ok 2008-Apr-30 21:57:24 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-30 21:57:24 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-30 21:57:24 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 21:57:24 START begin_task: Starting task 'waiting on setcal' 2008-Apr-30 21:57:24 LOG5 begin_task: Level: (4) ID = <10384> Status = 0 0 0 0 ok 2008-Apr-30 21:57:24 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-30 21:57:24 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 21:57:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 21:57:25 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-30 21:57:25 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-30 21:57:25 LOG5 end_task: Level: (4) ID = <10384> Status = 0 0 0 0 ok 2008-Apr-30 21:57:25 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-30 21:57:25 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-30 21:57:25 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-30 21:57:25 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-30 21:57:25 LOG5 begin_task: Level: (4) ID = <10385> Status = 0 0 0 0 ok 2008-Apr-30 21:57:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 21:57:25 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-30 21:57:25 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-30 21:57:25 LOG5 end_task: Level: (4) ID = <10385> Status = 0 0 0 0 ok 2008-Apr-30 21:57:25 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-30 21:57:25 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-30 21:57:25 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-30 21:57:26 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-30 21:57:26 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-30 21:57:26 LOG5 begin_task: Level: (4) ID = <10386> Status = 0 0 0 0 ok 2008-Apr-30 21:57:26 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-30 21:57:26 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-30 21:57:26 LOG5 end_task: Level: (4) ID = <10386> Status = 0 0 0 0 ok 2008-Apr-30 21:57:26 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-30 21:57:26 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-30 21:57:26 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-30 21:57:26 LOG5 finish_task: Level: (3) ID = <10383> Status = 0 0 0 0 ok 2008-Apr-30 21:57:26 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-30 21:57:26 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 21:57:26 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-30 21:57:26 LOG5 end_task: Level: (3) ID = <10383> Status = 0 0 0 0 ok 2008-Apr-30 21:57:26 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2008-Apr-30 21:57:26 INFO2 astwait: Waiting for 32 seconds from 01:57:26 to 01:57:58 UTC ... 2008-Apr-30 21:57:26 LOG4 send_obs_status: To obs_status: <1> TASKTIME 32 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-30 21:57:26 START begin_task: Starting task 'waiting on waiting for AST time' 2008-Apr-30 21:57:26 LOG5 begin_task: Level: (3) ID = <10387> Status = 0 0 0 0 ok 2008-Apr-30 21:57:58 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2008-Apr-30 21:57:58 LOG5 end_task: Level: (3) ID = <10387> Status = 0 0 0 0 ok 2008-Apr-30 21:57:58 INFO3 astwait: Finished waiting 2008-Apr-30 21:57:58 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-30 21:57:58 LOG5 dopset_later: Calling 'dopset_later 61.429410522243415' 2008-Apr-30 21:57:58 INFO3 dopset_later: Setting Doppler correction for 21:58:58 (61.4 seconds from now) 2008-Apr-30 21:57:58 LOG5 antvel: Calling 'antvel 0.000000 11.177433 F 61.429410522243415' 2008-Apr-30 21:57:58 LOG2 antvel: Parameters to Doppler: Heliocentric 93538 2008 121 0.0 2008-Apr-30 21:57:58 INFO5 antvel: Computed antenna velocity: +19.19472 km/s 2008-Apr-30 21:57:58 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=19.194720653400001 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-30 21:57:58 INFO4 dopset_gen: New sky frequencies: 1381.154998 1381.154998 1381.154998 1381.154998 1381.154998 1381.154998 1381.154998 1381.154998 1381.154998 2008-Apr-30 21:57:58 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.154998 sky0=1381.154998 sky1=1381.154998 sky2=1381.154998 sky3=1381.154998 sky4=1381.154998 sky5=1381.154998 sky6=1381.154998 sky7=1381.154998 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-30 21:57:58 LOG2 dopset_gen: Result from 'sky2syn': 1631.154998 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-30 21:57:58 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631154998.0} 2008-Apr-30 21:57:58 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 21:57:58 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-30 21:57:58 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-30 21:57:58 INFO5 fixed_driftmap: Tracking J2000 position: RA = 12:08:03.0 Dec = +07:13:21.9 2008-Apr-30 21:57:58 LOG3 track_source: Calling 'track_source AGESVC1A_p2_072 120803.0 071321.9 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-30 21:57:58 START begin_task: Starting task 'sending tracking commands' 2008-Apr-30 21:57:58 LOG5 begin_task: Level: (3) ID = <10388> Status = 0 0 0 0 ok 2008-Apr-30 21:57:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_072} INFO {Slewing to source 'AGESVC1A_p2_072' ...} 2008-Apr-30 21:57:58 INFO1 track_source: Starting to track AGESVC1A_p2_072 2008-Apr-30 21:57:58 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_072" 2008-Apr-30 21:57:58 LOG3 vw_send: To DATATAKING: set ra 120803.0 2008-Apr-30 21:57:58 LOG3 vw_send: To DATATAKING: set dec 071321.9 2008-Apr-30 21:57:58 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-30 21:57:58 LOG3 vw_send: To DATATAKING: pnt tr 120803.0 071321.9 -CJ 2008-Apr-30 21:57:58 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-30 21:57:58 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-30 21:57:58 LOG5 finish_task: Level: (3) ID = <10388> Status = 0 0 0 0 ok 2008-Apr-30 21:57:58 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-30 21:57:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 21:57:58 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-30 21:57:58 LOG5 end_task: Level: (3) ID = <10388> Status = 0 0 0 0 ok 2008-Apr-30 21:57:58 START begin_task: Starting task 'waiting on telescope' 2008-Apr-30 21:57:58 LOG5 begin_task: Level: (3) ID = <10389> Status = 0 0 0 0 ok 2008-Apr-30 21:57:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-30 21:57:58 LOG3 waittrk: Start waittrk 5 2008-Apr-30 21:57:58 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-30 21:57:58 LOG5 begin_task: Level: (4) ID = <10390> Status = 0 0 0 0 ok 2008-Apr-30 21:57:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631154998.0} 2008-Apr-30 21:57:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 21:57:58 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_072" 2008-Apr-30 21:57:58 LOG4 got_cormsg: From DATATAKING: set ra 120803.0 2008-Apr-30 21:57:58 LOG4 got_cormsg: From DATATAKING: set dec 071321.9 2008-Apr-30 21:57:58 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-30 21:57:58 LOG4 got_cormsg: From DATATAKING: vw% 120803.0 2008-Apr-30 21:57:58 LOG4 got_cormsg: From DATATAKING: vw% 071321.9 2008-Apr-30 21:57:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 21:57:58 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-30 21:57:58 LOG4 got_cormsg: From DATATAKING: pnt tr 120803.0 071321.9 -CJ 2008-Apr-30 21:57:58 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-30 21:57:58 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-30 21:57:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 21:58:03 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-30 21:58:03 LOG5 end_task: Level: (4) ID = <10390> Status = 0 0 0 0 ok 2008-Apr-30 21:58:03 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-30 21:58:03 LOG5 begin_task: Level: (4) ID = <10391> Status = 0 0 0 0 ok 2008-Apr-30 21:58:05 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-30 21:58:05 LOG5 end_task: Level: (4) ID = <10391> Status = 0 0 0 0 ok 2008-Apr-30 21:58:05 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-30 21:58:05 INFO2 waittrk: Now tracking AGESVC1A_p2_072 2008-Apr-30 21:58:05 LOG4 waittrk: Current telescope position: Az = 359.73 ZA = 11.15 2008-Apr-30 21:58:05 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-30 21:58:05 LOG5 finish_task: Level: (3) ID = <10389> Status = 0 0 0 0 ok 2008-Apr-30 21:58:05 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-30 21:58:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 21:58:05 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-30 21:58:05 LOG5 end_task: Level: (3) ID = <10389> Status = 0 0 0 0 ok 2008-Apr-30 21:58:05 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-30 21:58:05 LOG5 begin_task: Level: (3) ID = <10392> Status = 0 0 0 0 ok 2008-Apr-30 21:58:05 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-30 21:58:05 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-30 21:58:05 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-30 21:58:05 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-30 21:58:05 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 21:58:05 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-30 21:58:05 LOG5 begin_task: Level: (4) ID = <10393> Status = 0 0 0 0 ok 2008-Apr-30 21:58:05 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-30 21:58:05 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 21:58:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 21:58:08 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-30 21:58:08 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-30 21:58:08 LOG5 end_task: Level: (4) ID = <10393> Status = 0 0 0 0 ok 2008-Apr-30 21:58:08 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-30 21:58:08 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-30 21:58:08 LOG5 begin_task: Level: (4) ID = <10394> Status = 0 0 0 0 ok 2008-Apr-30 21:58:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-30 21:58:08 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-30 21:58:08 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-30 21:58:08 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-30 21:58:08 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-30 21:58:08 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-30 21:58:08 LOG5 begin_task: Level: (5) ID = <10395> Status = 0 0 0 0 ok 2008-Apr-30 21:58:09 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-30 21:58:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 21:58:09 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 2 dB --- beam 1: 8 6 dB 2008-Apr-30 21:58:09 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 6 dB 2008-Apr-30 21:58:09 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-30 21:58:09 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 2 3 dB 2008-Apr-30 21:58:09 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-30 21:58:09 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-30 21:58:09 LOG5 end_task: Level: (5) ID = <10395> Status = 0 0 0 0 ok 2008-Apr-30 21:58:09 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.894 1.055 ALFA beam 1: 0.893 1.095 2008-Apr-30 21:58:09 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.018 0.929 ALFA beam 3: 0.959 1.033 2008-Apr-30 21:58:09 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.914 0.944 ALFA beam 5: 0.998 0.879 2008-Apr-30 21:58:09 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.018 1.022 ALFA beam 7: 1.108 0.909 2008-Apr-30 21:58:09 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-30 21:58:09 LOG5 finish_task: Level: (4) ID = <10394> Status = 0 0 0 0 ok 2008-Apr-30 21:58:09 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-30 21:58:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 21:58:09 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-30 21:58:09 LOG5 end_task: Level: (4) ID = <10394> Status = 0 0 0 0 ok 2008-Apr-30 21:58:09 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-30 21:58:09 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-30 21:58:09 LOG5 finish_task: Level: (3) ID = <10392> Status = 0 0 0 0 ok 2008-Apr-30 21:58:09 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-30 21:58:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 21:58:09 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-30 21:58:09 LOG5 end_task: Level: (3) ID = <10392> Status = 0 0 0 0 ok 2008-Apr-30 21:58:09 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 SS 2008-Apr-30 21:58:09 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 SS 2008-Apr-30 21:58:09 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 SS 2008-Apr-30 21:58:09 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 SS 2008-Apr-30 21:58:09 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-30 21:58:09 START begin_task: Starting task 'WAPP calibration' 2008-Apr-30 21:58:09 LOG5 begin_task: Level: (3) ID = <10396> Status = 0 0 0 0 ok 2008-Apr-30 21:58:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-30 21:58:09 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-30 21:58:09 START begin_task: Starting task 'selecting calibration type' 2008-Apr-30 21:58:09 LOG5 begin_task: Level: (4) ID = <10397> Status = 0 0 0 0 ok 2008-Apr-30 21:58:09 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-30 21:58:09 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-30 21:58:09 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 21:58:09 START begin_task: Starting task 'waiting on setcal' 2008-Apr-30 21:58:09 LOG5 begin_task: Level: (5) ID = <10398> Status = 0 0 0 0 ok 2008-Apr-30 21:58:09 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 SS' 2008-Apr-30 21:58:09 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-30 21:58:09 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 21:58:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 21:58:10 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-30 21:58:10 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-30 21:58:10 LOG5 end_task: Level: (5) ID = <10398> Status = 0 0 0 0 ok 2008-Apr-30 21:58:10 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-30 21:58:10 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-30 21:58:10 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-30 21:58:10 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-30 21:58:10 LOG5 begin_task: Level: (5) ID = <10399> Status = 0 0 0 0 ok 2008-Apr-30 21:58:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 21:58:10 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-30 21:58:10 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-30 21:58:10 LOG5 end_task: Level: (5) ID = <10399> Status = 0 0 0 0 ok 2008-Apr-30 21:58:10 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-30 21:58:10 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-30 21:58:10 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-30 21:58:10 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-30 21:58:10 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-30 21:58:10 LOG5 begin_task: Level: (5) ID = <10400> Status = 0 0 0 0 ok 2008-Apr-30 21:58:10 NOTE WAPPDATA-new_file: New FITS file: wapp.20080430.a2048.0009.fits 2008-Apr-30 21:58:10 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-30 21:58:10 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-30 21:58:10 LOG5 end_task: Level: (5) ID = <10400> Status = 0 0 0 0 ok 2008-Apr-30 21:58:10 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-30 21:58:10 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-30 21:58:10 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-30 21:58:10 LOG5 finish_task: Level: (4) ID = <10397> Status = 0 0 0 0 ok 2008-Apr-30 21:58:10 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-30 21:58:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 21:58:10 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-30 21:58:10 LOG5 end_task: Level: (4) ID = <10397> Status = 0 0 0 0 ok 2008-Apr-30 21:58:10 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-30 21:58:10 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-30 21:58:10 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-30 21:58:10 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-30 21:58:10 LOG5 begin_task: Level: (4) ID = <10401> Status = 0 0 0 0 ok 2008-Apr-30 21:58:10 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080430.a2048.0009.fits} 2008-Apr-30 21:58:10 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-30 21:58:10 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-30 21:58:10 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-30 21:58:10 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-30 21:58:10 LOG5 end_task: Level: (4) ID = <10401> Status = 0 0 0 0 ok 2008-Apr-30 21:58:10 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-30 21:58:10 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-30 21:58:10 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-30 21:58:10 LOG5 begin_task: Level: (4) ID = <10402> Status = 0 0 0 0 ok 2008-Apr-30 21:58:10 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-30 21:58:10 LOG5 log_alfabeam: Parameters: 12.134166666666665 7.2227499999999987 12.144049 2008.3337861561083 19.099895 2008-Apr-30 21:58:10 LOG4 log_alfabeam: ALFABEAM 0 12.134166666667916 7.222749999999993 2008-Apr-30 21:58:10 LOG4 log_alfabeam: ALFABEAM 1 12.133040914065955 7.327567157233086 2008-Apr-30 21:58:10 LOG4 log_alfabeam: ALFABEAM 2 12.128388400083491 7.258282711937455 2008-Apr-30 21:58:10 LOG4 log_alfabeam: ALFABEAM 3 12.129479225223575 7.153366669645908 2008-Apr-30 21:58:10 LOG4 log_alfabeam: ALFABEAM 4 12.135313390891325 7.117957450273833 2008-Apr-30 21:58:10 LOG4 log_alfabeam: ALFABEAM 5 12.139979977512713 7.187857874813653 2008-Apr-30 21:58:10 LOG4 log_alfabeam: ALFABEAM 6 12.138798364136942 7.292547366084158 2008-Apr-30 21:58:10 INFO2 take_spectra: Starting WAPP scan: 812100123 2008-Apr-30 21:58:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-30 21:58:11 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-30 21:58:11 LOG5 begin_task: Level: (5) ID = <10403> Status = 0 0 0 0 ok 2008-Apr-30 21:58:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-30 21:58:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7092.00 2008-Apr-30 21:58:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.154998 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-30 21:58:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.154998 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 21:58:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.154998 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 21:58:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.154998 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-30 21:58:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.154998 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 21:58:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.154998 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 21:58:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.154998 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 21:58:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.154998 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 21:58:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.154998 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 21:58:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-30 21:58:17 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-30 21:58:17 LOG5 end_task: Level: (5) ID = <10403> Status = 0 0 0 0 ok 2008-Apr-30 21:58:17 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-30 21:58:17 LOG5 end_task: Level: (4) ID = <10402> Status = 0 0 0 0 ok 2008-Apr-30 21:58:17 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-30 21:58:17 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-30 21:58:17 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-30 21:58:17 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-30 21:58:17 LOG5 begin_task: Level: (4) ID = <10404> Status = 0 0 0 0 ok 2008-Apr-30 21:58:17 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-30 21:58:17 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-30 21:58:17 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-30 21:58:17 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-30 21:58:17 LOG5 end_task: Level: (4) ID = <10404> Status = 0 0 0 0 ok 2008-Apr-30 21:58:17 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-30 21:58:17 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-30 21:58:17 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-30 21:58:17 LOG5 begin_task: Level: (4) ID = <10405> Status = 0 0 0 0 ok 2008-Apr-30 21:58:17 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-30 21:58:17 LOG5 log_alfabeam: Parameters: 12.134166666666665 7.2227499999999987 12.145999 2008.333786377925 19.099895 2008-Apr-30 21:58:17 LOG4 log_alfabeam: ALFABEAM 0 12.134166666667182 7.222750000000000 2008-Apr-30 21:58:17 LOG4 log_alfabeam: ALFABEAM 1 12.133058527378495 7.327608702281999 2008-Apr-30 21:58:17 LOG4 log_alfabeam: ALFABEAM 2 12.128394385337495 7.258497521065186 2008-Apr-30 21:58:17 LOG4 log_alfabeam: ALFABEAM 3 12.129467586962013 7.153541234354753 2008-Apr-30 21:58:17 LOG4 log_alfabeam: ALFABEAM 4 12.135295789428886 7.117915124639354 2008-Apr-30 21:58:17 LOG4 log_alfabeam: ALFABEAM 5 12.139974097449592 7.187641751837610 2008-Apr-30 21:58:17 LOG4 log_alfabeam: ALFABEAM 6 12.138810074668465 7.292374867992514 2008-Apr-30 21:58:17 INFO2 take_spectra: Starting WAPP scan: 812100124 2008-Apr-30 21:58:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-30 21:58:18 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-30 21:58:18 LOG5 begin_task: Level: (5) ID = <10406> Status = 0 0 0 0 ok 2008-Apr-30 21:58:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-30 21:58:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7099.00 2008-Apr-30 21:58:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.553 > 1.4)! 2008-Apr-30 21:58:23 LOG4 check_wapp_levels: WAPP-1 power levels: 1.230 1.403 1.207 1.474 2008-Apr-30 21:58:23 LOG4 check_wapp_levels: WAPP-2 power levels: 1.387 1.284 1.328 1.416 2008-Apr-30 21:58:23 LOG4 check_wapp_levels: WAPP-3 power levels: 1.276 1.319 1.392 1.185 2008-Apr-30 21:58:23 LOG4 check_wapp_levels: WAPP-4 power levels: 1.428 1.425 1.553 1.268 2008-Apr-30 21:58:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.154998 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-30 21:58:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.154998 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 21:58:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.154998 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 21:58:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.154998 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-30 21:58:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.154998 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 21:58:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.154998 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 21:58:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.154998 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 21:58:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.154998 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 21:58:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.154998 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 21:58:24 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-30 21:58:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-30 21:58:24 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-30 21:58:24 LOG5 end_task: Level: (5) ID = <10406> Status = 0 0 0 0 ok 2008-Apr-30 21:58:24 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-30 21:58:24 LOG5 end_task: Level: (4) ID = <10405> Status = 0 0 0 0 ok 2008-Apr-30 21:58:24 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-30 21:58:24 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-30 21:58:24 LOG5 finish_task: Level: (3) ID = <10396> Status = 0 0 0 0 ok 2008-Apr-30 21:58:24 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-30 21:58:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 21:58:24 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-30 21:58:24 LOG5 end_task: Level: (3) ID = <10396> Status = 0 0 0 0 ok 2008-Apr-30 21:58:24 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-30 21:58:24 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 0.00 and ZA = 11.18 2008-Apr-30 21:58:24 LOG3 track_source: Calling 'track_source AGESVC1A_p2_072 0.00 11.1774330704 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-30 21:58:24 START begin_task: Starting task 'sending tracking commands' 2008-Apr-30 21:58:24 LOG5 begin_task: Level: (3) ID = <10407> Status = 0 0 0 0 ok 2008-Apr-30 21:58:24 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_072} INFO {Slewing to source 'AGESVC1A_p2_072' ...} 2008-Apr-30 21:58:24 INFO1 track_source: Starting to track AGESVC1A_p2_072 2008-Apr-30 21:58:24 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_072" 2008-Apr-30 21:58:24 LOG3 vw_send: To DATATAKING: set ra 0.00 2008-Apr-30 21:58:24 LOG3 vw_send: To DATATAKING: set dec 11.1774330704 2008-Apr-30 21:58:24 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-30 21:58:24 LOG3 vw_send: To DATATAKING: pnt tr 0.00 11.1774330704 -CF 2008-Apr-30 21:58:24 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-30 21:58:24 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-30 21:58:24 LOG5 finish_task: Level: (3) ID = <10407> Status = 0 0 0 0 ok 2008-Apr-30 21:58:24 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-30 21:58:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 21:58:25 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-30 21:58:25 LOG5 end_task: Level: (3) ID = <10407> Status = 0 0 0 0 ok 2008-Apr-30 21:58:25 LOG1 fixed_driftmap: Parameters: HA = +00:00:00.0 Start = 12:09:27.1 LST = 12:08:52.6 diff = 34.5 secs 2008-Apr-30 21:58:25 INFO2 fixed_driftmap: Waiting 32.5 seconds for RA 12:09:27 2008-Apr-30 21:58:25 INFO2 lstwait: Waiting for 32.4 secs from LST 12:08:53 to LST 12:09:25 ... 2008-Apr-30 21:58:25 LOG4 send_obs_status: To obs_status: <1> TASKTIME 32.436788711044805 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-30 21:58:25 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-30 21:58:25 LOG5 begin_task: Level: (3) ID = <10408> Status = 0 0 0 0 ok 2008-Apr-30 21:58:25 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_072" 2008-Apr-30 21:58:25 LOG4 got_cormsg: From DATATAKING: set ra 0.00 2008-Apr-30 21:58:25 LOG4 got_cormsg: From DATATAKING: set dec 11.1774330704 2008-Apr-30 21:58:25 LOG4 got_cormsg: From DATATAKING: vw% 0.00 2008-Apr-30 21:58:25 LOG4 got_cormsg: From DATATAKING: vw% 11.1774330704 2008-Apr-30 21:58:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 21:58:25 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-30 21:58:25 LOG4 got_cormsg: From DATATAKING: pnt tr 0.00 11.1774330704 -CF 2008-Apr-30 21:58:25 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-30 21:58:25 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-30 21:58:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 21:58:29 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.879 and 1.108 2008-Apr-30 21:58:57 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-30 21:58:57 LOG5 end_task: Level: (3) ID = <10408> Status = 0 0 0 0 ok 2008-Apr-30 21:58:57 LOG4 lstwait: Finished waiting, the gui caused difference: 0.56560340000046949 2008-Apr-30 21:58:57 INFO3 lstwait: Finished waiting 2008-Apr-30 21:58:57 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-30 21:58:57 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-30 21:58:57 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-30 21:58:57 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-30 21:58:57 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-30 21:58:57 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-30 21:58:57 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-30 21:58:57 LOG5 begin_task: Level: (3) ID = <10409> Status = 0 0 0 0 ok 2008-Apr-30 21:58:57 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-30 21:58:57 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-30 21:58:57 INFO2 take_spectra: Starting WAPP scan: 812100125 2008-Apr-30 21:58:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-30 21:58:58 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-30 21:58:58 LOG5 begin_task: Level: (4) ID = <10410> Status = 0 0 0 0 ok 2008-Apr-30 21:58:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-30 21:58:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7139.00 2008-Apr-30 21:59:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.154998 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-30 21:59:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.154998 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 21:59:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.154998 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 21:59:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.154998 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-30 21:59:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.154998 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 21:59:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.154998 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 21:59:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.154998 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 21:59:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.154998 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 21:59:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.154998 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 22:11:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.794 < 0.8)! 2008-Apr-30 22:11:53 LOG4 check_wapp_levels: WAPP-1 power levels: 0.892 0.794 0.902 1.099 2008-Apr-30 22:11:53 LOG4 check_wapp_levels: WAPP-2 power levels: 1.022 0.936 0.959 1.036 2008-Apr-30 22:11:53 LOG4 check_wapp_levels: WAPP-3 power levels: 0.917 0.950 1.006 0.883 2008-Apr-30 22:11:53 LOG4 check_wapp_levels: WAPP-4 power levels: 1.019 1.026 1.109 0.914 2008-Apr-30 22:11:55 INFO5 check_wapp_levels: WAPP power levels are between 0.683 and 1.110 (still bad) 2008-Apr-30 22:11:57 INFO5 check_wapp_levels: WAPP power levels are between 0.685 and 1.110 (still bad) 2008-Apr-30 22:11:59 INFO5 check_wapp_levels: WAPP power levels are between 0.690 and 1.111 (still bad) 2008-Apr-30 22:12:01 INFO5 check_wapp_levels: WAPP power levels are between 0.692 and 1.110 (still bad) 2008-Apr-30 22:12:03 INFO5 check_wapp_levels: WAPP power levels are between 0.699 and 1.110 (still bad) 2008-Apr-30 22:12:05 INFO5 check_wapp_levels: WAPP power levels are between 0.708 and 1.111 (still bad) 2008-Apr-30 22:12:07 INFO5 check_wapp_levels: WAPP power levels are between 0.711 and 1.111 (still bad) 2008-Apr-30 22:12:09 INFO5 check_wapp_levels: WAPP power levels are between 0.721 and 1.111 (still bad) 2008-Apr-30 22:12:11 INFO5 check_wapp_levels: WAPP power levels are between 0.730 and 1.111 (still bad) 2008-Apr-30 22:12:13 INFO5 check_wapp_levels: WAPP power levels are between 0.733 and 1.111 (still bad) 2008-Apr-30 22:12:15 INFO5 check_wapp_levels: WAPP power levels are between 0.725 and 1.111 (still bad) 2008-Apr-30 22:12:17 INFO5 check_wapp_levels: WAPP power levels are between 0.730 and 1.112 (still bad) 2008-Apr-30 22:12:19 INFO5 check_wapp_levels: WAPP power levels are between 0.714 and 1.112 (still bad) 2008-Apr-30 22:12:21 INFO5 check_wapp_levels: WAPP power levels are between 0.721 and 1.112 (still bad) 2008-Apr-30 22:12:23 INFO5 check_wapp_levels: WAPP power levels are between 0.745 and 1.111 (still bad) 2008-Apr-30 22:12:25 INFO5 check_wapp_levels: WAPP power levels are between 0.742 and 1.111 (still bad) 2008-Apr-30 22:12:27 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.885 and 1.112 2008-Apr-30 22:13:47 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 22:13:47.303 (seconds: 80027.303)!} 2008-Apr-30 22:13:47 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 22:13:47.303 (seconds: 80027.303)! 2008-Apr-30 22:13:48 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 80026.0 to 80027.0! 2008-Apr-30 22:13:49 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (80026.0 - 80028.0)! 2008-Apr-30 22:16:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (3.300 > 1.4)! 2008-Apr-30 22:16:38 LOG4 check_wapp_levels: WAPP-1 power levels: 0.901 3.300 0.920 1.112 2008-Apr-30 22:16:38 LOG4 check_wapp_levels: WAPP-2 power levels: 1.026 0.937 0.961 1.036 2008-Apr-30 22:16:38 LOG4 check_wapp_levels: WAPP-3 power levels: 0.925 0.954 1.010 0.886 2008-Apr-30 22:16:38 LOG4 check_wapp_levels: WAPP-4 power levels: 1.022 1.031 1.113 0.919 2008-Apr-30 22:16:40 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.854 and 1.114 2008-Apr-30 22:16:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (3.532 > 1.4)! 2008-Apr-30 22:16:42 LOG4 check_wapp_levels: WAPP-1 power levels: 0.902 3.532 0.922 1.113 2008-Apr-30 22:16:42 LOG4 check_wapp_levels: WAPP-2 power levels: 1.025 0.937 0.962 1.037 2008-Apr-30 22:16:42 LOG4 check_wapp_levels: WAPP-3 power levels: 0.924 0.953 1.013 0.884 2008-Apr-30 22:16:42 LOG4 check_wapp_levels: WAPP-4 power levels: 1.023 1.032 1.113 0.919 2008-Apr-30 22:16:44 INFO5 check_wapp_levels: WAPP power levels are between 0.793 and 1.117 (still bad) 2008-Apr-30 22:16:46 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.878 and 1.118 2008-Apr-30 22:16:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.782 < 0.8)! 2008-Apr-30 22:16:48 LOG4 check_wapp_levels: WAPP-1 power levels: 0.908 0.782 0.927 1.120 2008-Apr-30 22:16:48 LOG4 check_wapp_levels: WAPP-2 power levels: 1.024 0.937 0.962 1.039 2008-Apr-30 22:16:48 LOG4 check_wapp_levels: WAPP-3 power levels: 0.926 0.952 1.014 0.885 2008-Apr-30 22:16:48 LOG4 check_wapp_levels: WAPP-4 power levels: 1.022 1.029 1.112 0.917 2008-Apr-30 22:16:50 INFO5 check_wapp_levels: WAPP power levels are between 0.667 and 1.122 (still bad) 2008-Apr-30 22:16:52 INFO5 check_wapp_levels: WAPP power levels are between 0.614 and 1.122 (still bad) 2008-Apr-30 22:16:54 INFO5 check_wapp_levels: WAPP power levels are between 0.718 and 1.124 (still bad) 2008-Apr-30 22:16:56 INFO5 check_wapp_levels: WAPP power levels are between 0.653 and 1.124 (still bad) 2008-Apr-30 22:16:58 INFO5 check_wapp_levels: WAPP power levels are between 0.747 and 1.123 (still bad) 2008-Apr-30 22:17:00 INFO5 check_wapp_levels: WAPP power levels are between 0.752 and 1.123 (still bad) 2008-Apr-30 22:17:02 INFO5 check_wapp_levels: WAPP power levels are between 0.718 and 1.124 (still bad) 2008-Apr-30 22:17:04 INFO5 check_wapp_levels: WAPP power levels are between 0.757 and 1.122 (still bad) 2008-Apr-30 22:17:06 INFO5 check_wapp_levels: WAPP power levels are between 0.674 and 1.125 (still bad) 2008-Apr-30 22:17:08 INFO5 check_wapp_levels: WAPP power levels are between 0.688 and 1.124 (still bad) 2008-Apr-30 22:17:10 INFO5 check_wapp_levels: WAPP power levels are between 0.705 and 1.125 (still bad) 2008-Apr-30 22:17:12 INFO5 check_wapp_levels: WAPP power levels are between 0.551 and 1.126 (still bad) 2008-Apr-30 22:17:14 INFO5 check_wapp_levels: WAPP power levels are between 0.886 and 3.513 (still bad) 2008-Apr-30 22:17:16 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.888 and 1.126 2008-Apr-30 22:17:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.704 < 0.8)! 2008-Apr-30 22:17:19 LOG4 check_wapp_levels: WAPP-1 power levels: 0.910 0.704 0.926 1.125 2008-Apr-30 22:17:19 LOG4 check_wapp_levels: WAPP-2 power levels: 1.026 0.940 0.962 1.038 2008-Apr-30 22:17:19 LOG4 check_wapp_levels: WAPP-3 power levels: 0.928 0.954 1.014 0.889 2008-Apr-30 22:17:19 LOG4 check_wapp_levels: WAPP-4 power levels: 1.025 1.032 1.116 0.920 2008-Apr-30 22:17:21 INFO5 check_wapp_levels: WAPP power levels are between 0.658 and 1.126 (still bad) 2008-Apr-30 22:17:23 INFO5 check_wapp_levels: WAPP power levels are between 0.686 and 1.125 (still bad) 2008-Apr-30 22:17:25 INFO5 check_wapp_levels: WAPP power levels are between 0.758 and 1.126 (still bad) 2008-Apr-30 22:17:27 INFO5 check_wapp_levels: WAPP power levels are between 0.771 and 1.125 (still bad) 2008-Apr-30 22:17:29 INFO5 check_wapp_levels: WAPP power levels are between 0.887 and 1.947 (still bad) 2008-Apr-30 22:17:31 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.891 and 1.126 2008-Apr-30 22:17:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.788 < 0.8)! 2008-Apr-30 22:17:43 LOG4 check_wapp_levels: WAPP-1 power levels: 0.906 0.788 0.928 1.128 2008-Apr-30 22:17:43 LOG4 check_wapp_levels: WAPP-2 power levels: 1.026 0.939 0.963 1.039 2008-Apr-30 22:17:43 LOG4 check_wapp_levels: WAPP-3 power levels: 0.924 0.954 1.028 0.901 2008-Apr-30 22:17:43 LOG4 check_wapp_levels: WAPP-4 power levels: 1.024 1.029 1.114 0.917 2008-Apr-30 22:17:45 INFO5 check_wapp_levels: WAPP power levels are between 0.776 and 1.131 (still bad) 2008-Apr-30 22:17:47 INFO5 check_wapp_levels: WAPP power levels are between 0.766 and 1.133 (still bad) 2008-Apr-30 22:17:49 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.804 and 1.133 2008-Apr-30 22:17:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.719 < 0.8)! 2008-Apr-30 22:17:51 LOG4 check_wapp_levels: WAPP-1 power levels: 0.914 0.719 0.934 1.133 2008-Apr-30 22:17:51 LOG4 check_wapp_levels: WAPP-2 power levels: 1.026 0.940 0.964 1.039 2008-Apr-30 22:17:51 LOG4 check_wapp_levels: WAPP-3 power levels: 0.927 0.955 1.014 0.886 2008-Apr-30 22:17:51 LOG4 check_wapp_levels: WAPP-4 power levels: 1.023 1.028 1.113 0.917 2008-Apr-30 22:17:53 INFO5 check_wapp_levels: WAPP power levels are between 0.786 and 1.136 (still bad) 2008-Apr-30 22:17:55 INFO5 check_wapp_levels: WAPP power levels are between 0.777 and 1.136 (still bad) 2008-Apr-30 22:17:57 INFO5 check_wapp_levels: WAPP power levels are between 0.793 and 1.136 (still bad) 2008-Apr-30 22:17:59 INFO5 check_wapp_levels: WAPP power levels are between 0.799 and 1.136 (still bad) 2008-Apr-30 22:18:01 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.804 and 1.136 2008-Apr-30 22:18:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.798 < 0.8)! 2008-Apr-30 22:18:35 LOG4 check_wapp_levels: WAPP-1 power levels: 0.902 0.798 0.914 1.121 2008-Apr-30 22:18:35 LOG4 check_wapp_levels: WAPP-2 power levels: 1.028 0.939 0.962 1.037 2008-Apr-30 22:18:35 LOG4 check_wapp_levels: WAPP-3 power levels: 0.920 0.951 1.010 0.884 2008-Apr-30 22:18:35 LOG4 check_wapp_levels: WAPP-4 power levels: 1.021 1.028 1.113 0.916 2008-Apr-30 22:18:37 INFO5 check_wapp_levels: WAPP power levels are between 0.799 and 1.119 (still bad) 2008-Apr-30 22:18:39 INFO5 check_wapp_levels: WAPP power levels are between 0.799 and 1.119 (still bad) 2008-Apr-30 22:18:41 INFO5 check_wapp_levels: WAPP power levels are between 0.796 and 1.120 (still bad) 2008-Apr-30 22:18:43 INFO5 check_wapp_levels: WAPP power levels are between 0.795 and 1.121 (still bad) 2008-Apr-30 22:18:46 INFO5 check_wapp_levels: WAPP power levels are between 0.795 and 1.121 (still bad) 2008-Apr-30 22:18:48 INFO5 check_wapp_levels: WAPP power levels are between 0.794 and 1.121 (still bad) 2008-Apr-30 22:18:50 INFO5 check_wapp_levels: WAPP power levels are between 0.793 and 1.121 (still bad) 2008-Apr-30 22:18:52 INFO5 check_wapp_levels: WAPP power levels are between 0.794 and 1.119 (still bad) 2008-Apr-30 22:18:54 INFO5 check_wapp_levels: WAPP power levels are between 0.794 and 1.120 (still bad) 2008-Apr-30 22:18:56 INFO5 check_wapp_levels: WAPP power levels are between 0.793 and 1.119 (still bad) 2008-Apr-30 22:18:58 INFO5 check_wapp_levels: WAPP power levels are between 0.792 and 1.118 (still bad) 2008-Apr-30 22:18:59 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-30 22:18:59 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-30 22:18:59 LOG5 end_task: Level: (4) ID = <10410> Status = 0 0 0 0 ok 2008-Apr-30 22:18:59 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-30 22:18:59 LOG5 end_task: Level: (3) ID = <10409> Status = 0 0 0 0 ok 2008-Apr-30 22:18:59 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-30 22:18:59 LOG5 finish_task: Level: (2) ID = <10376> Status = 0 0 0 0 ok 2008-Apr-30 22:18:59 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-30 22:18:59 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-30 22:18:59 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-30 22:18:59 LOG5 end_task: Level: (2) ID = <10376> Status = 0 0 0 0 ok 2008-Apr-30 22:18:59 COMMAND run_command_line: EXECUTING command 43: 'FIXEDDRIFT az=27.24 alfaangle=-3.5 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_074 ra=120900.00 dec=71030.00' 2008-Apr-30 22:18:59 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-30 22:19:00 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-30 22:19:00 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 27.24 -3.5 hcorcal 5 tracking no first 1 AGESVC1A_p2_074 120900.00 71030.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-30 22:19:00 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-30 22:19:00 LOG5 begin_task: Level: (2) ID = <10411> Status = 0 0 0 0 ok 2008-Apr-30 22:19:00 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGESVC1A_p2_072' 2008-Apr-30 22:19:00 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-30 22:19:00 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1A_p2_074} 2008-Apr-30 22:19:00 INFO3 fixed_driftmap: Sending telescope to Az = 27.24 and ZA = 12.55 2008-Apr-30 22:19:00 LOG3 track_source: Calling 'track_source AGESVC1A_p2_074 27.24 12.5459282098 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-30 22:19:00 START begin_task: Starting task 'sending tracking commands' 2008-Apr-30 22:19:00 LOG5 begin_task: Level: (3) ID = <10412> Status = 0 0 0 0 ok 2008-Apr-30 22:19:00 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_074} INFO {Slewing to source 'AGESVC1A_p2_074' ...} 2008-Apr-30 22:19:00 INFO1 track_source: Starting to track AGESVC1A_p2_074 2008-Apr-30 22:19:00 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_074" 2008-Apr-30 22:19:00 LOG3 vw_send: To DATATAKING: set ra 27.24 2008-Apr-30 22:19:00 LOG3 vw_send: To DATATAKING: set dec 12.5459282098 2008-Apr-30 22:19:00 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-30 22:19:00 LOG3 vw_send: To DATATAKING: pnt tr 27.24 12.5459282098 -CF 2008-Apr-30 22:19:00 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-30 22:19:00 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-30 22:19:00 LOG5 finish_task: Level: (3) ID = <10412> Status = 0 0 0 0 ok 2008-Apr-30 22:19:00 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-30 22:19:00 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 22:19:00 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-30 22:19:00 LOG5 end_task: Level: (3) ID = <10412> Status = 0 0 0 0 ok 2008-Apr-30 22:19:00 START begin_task: Starting task 'rotate ALFA to -3.5 degrees' 2008-Apr-30 22:19:00 LOG5 begin_task: Level: (3) ID = <10413> Status = 0 0 0 0 ok 2008-Apr-30 22:19:00 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -3.5 degrees ...} 2008-Apr-30 22:19:00 INFO2 rotate_alfa: ALFA commanded to -3.5 degrees 2008-Apr-30 22:19:00 LOG3 sock_errsend: To ALFAMOTOR: POSITION -3.5 REPLY 2008-Apr-30 22:19:00 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-30 22:19:00 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-30 22:19:00 LOG5 begin_task: Level: (4) ID = <10414> Status = 0 0 0 0 ok 2008-Apr-30 22:19:00 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_074" 2008-Apr-30 22:19:00 INFO5 check_wapp_levels: WAPP power levels are between 0.790 and 1.119 (still bad) 2008-Apr-30 22:19:00 LOG4 got_cormsg: From DATATAKING: set ra 27.24 2008-Apr-30 22:19:00 LOG4 got_cormsg: From DATATAKING: set dec 12.5459282098 2008-Apr-30 22:19:00 LOG4 got_cormsg: From DATATAKING: vw% 27.24 2008-Apr-30 22:19:00 LOG4 got_cormsg: From DATATAKING: vw% 12.5459282098 2008-Apr-30 22:19:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 22:19:00 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-30 22:19:00 LOG4 got_cormsg: From DATATAKING: pnt tr 27.24 12.5459282098 -CF 2008-Apr-30 22:19:00 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-30 22:19:00 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-30 22:19:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 22:19:14 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-30 22:19:14 INFO3 alfa_motor: ALFA rotator in-position -3.50 degrees 2008-Apr-30 22:19:14 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-30 22:19:14 LOG5 end_task: Level: (4) ID = <10414> Status = 0 0 0 0 ok 2008-Apr-30 22:19:14 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-30 22:19:14 STOP finish_task: Finishing task 'rotate ALFA to -3.5 degrees' 2008-Apr-30 22:19:14 LOG5 finish_task: Level: (3) ID = <10413> Status = 0 0 0 0 ok 2008-Apr-30 22:19:14 INFO2 finish_task: DONE finished configuration: rotating ALFA to -3.5 degrees 2008-Apr-30 22:19:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 22:19:14 STOP end_task: Finishing task 'rotate ALFA to -3.5 degrees' with status 'OK' 2008-Apr-30 22:19:14 LOG5 end_task: Level: (3) ID = <10413> Status = 0 0 0 0 ok 2008-Apr-30 22:19:14 START begin_task: Starting task 'waiting on telescope' 2008-Apr-30 22:19:14 LOG5 begin_task: Level: (3) ID = <10415> Status = 0 0 0 0 ok 2008-Apr-30 22:19:14 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-30 22:19:14 LOG3 waittrk: Start waittrk 5 2008-Apr-30 22:19:14 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-30 22:19:14 LOG5 begin_task: Level: (4) ID = <10416> Status = 0 0 0 0 ok 2008-Apr-30 22:19:19 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-30 22:19:19 LOG5 end_task: Level: (4) ID = <10416> Status = 0 0 0 0 ok 2008-Apr-30 22:19:19 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-30 22:19:19 LOG5 begin_task: Level: (4) ID = <10417> Status = 0 0 0 0 ok 2008-Apr-30 22:20:22 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-30 22:20:22 LOG5 end_task: Level: (4) ID = <10417> Status = 0 0 0 0 ok 2008-Apr-30 22:20:22 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-30 22:20:22 INFO2 waittrk: Now tracking AGESVC1A_p2_074 2008-Apr-30 22:20:22 LOG4 waittrk: Current telescope position: Az = 386.96 ZA = 12.52 2008-Apr-30 22:20:22 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-30 22:20:22 LOG5 finish_task: Level: (3) ID = <10415> Status = 0 0 0 0 ok 2008-Apr-30 22:20:22 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-30 22:20:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 22:20:22 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-30 22:20:22 LOG5 end_task: Level: (3) ID = <10415> Status = 0 0 0 0 ok 2008-Apr-30 22:20:22 START begin_task: Starting task 'selecting calibration type' 2008-Apr-30 22:20:22 LOG5 begin_task: Level: (3) ID = <10418> Status = 0 0 0 0 ok 2008-Apr-30 22:20:22 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-30 22:20:22 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-30 22:20:22 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 22:20:22 START begin_task: Starting task 'waiting on setcal' 2008-Apr-30 22:20:22 LOG5 begin_task: Level: (4) ID = <10419> Status = 0 0 0 0 ok 2008-Apr-30 22:20:22 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-30 22:20:22 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 22:20:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 22:20:23 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-30 22:20:23 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-30 22:20:23 LOG5 end_task: Level: (4) ID = <10419> Status = 0 0 0 0 ok 2008-Apr-30 22:20:23 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-30 22:20:23 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-30 22:20:23 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-30 22:20:23 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-30 22:20:23 LOG5 begin_task: Level: (4) ID = <10420> Status = 0 0 0 0 ok 2008-Apr-30 22:20:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 22:20:24 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-30 22:20:24 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-30 22:20:24 LOG5 end_task: Level: (4) ID = <10420> Status = 0 0 0 0 ok 2008-Apr-30 22:20:24 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-30 22:20:24 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-30 22:20:24 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-30 22:20:24 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-30 22:20:24 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-30 22:20:24 LOG5 begin_task: Level: (4) ID = <10421> Status = 0 0 0 0 ok 2008-Apr-30 22:20:24 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-30 22:20:24 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-30 22:20:24 LOG5 end_task: Level: (4) ID = <10421> Status = 0 0 0 0 ok 2008-Apr-30 22:20:24 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-30 22:20:24 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-30 22:20:24 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-30 22:20:24 LOG5 finish_task: Level: (3) ID = <10418> Status = 0 0 0 0 ok 2008-Apr-30 22:20:24 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-30 22:20:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 22:20:24 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-30 22:20:24 LOG5 end_task: Level: (3) ID = <10418> Status = 0 0 0 0 ok 2008-Apr-30 22:20:24 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2008-Apr-30 22:20:24 INFO2 astwait: Waiting for 31 seconds from 02:20:24 to 02:20:55 UTC ... 2008-Apr-30 22:20:24 LOG4 send_obs_status: To obs_status: <1> TASKTIME 31 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-30 22:20:24 START begin_task: Starting task 'waiting on waiting for AST time' 2008-Apr-30 22:20:24 LOG5 begin_task: Level: (3) ID = <10422> Status = 0 0 0 0 ok 2008-Apr-30 22:20:55 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2008-Apr-30 22:20:55 LOG5 end_task: Level: (3) ID = <10422> Status = 0 0 0 0 ok 2008-Apr-30 22:20:55 INFO3 astwait: Finished waiting 2008-Apr-30 22:20:55 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-30 22:20:55 LOG5 dopset_later: Calling 'dopset_later 60.836182945492084' 2008-Apr-30 22:20:55 INFO3 dopset_later: Setting Doppler correction for 22:21:55 (60.8 seconds from now) 2008-Apr-30 22:20:55 LOG5 antvel: Calling 'antvel 27.240000 12.545928 F 60.836182945492084' 2008-Apr-30 22:20:55 LOG2 antvel: Parameters to Doppler: Heliocentric 94915 2008 121 0.0 2008-Apr-30 22:20:55 INFO5 antvel: Computed antenna velocity: +19.23884 km/s 2008-Apr-30 22:20:55 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=19.238840335799999 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-30 22:20:55 INFO4 dopset_gen: New sky frequencies: 1381.154795 1381.154795 1381.154795 1381.154795 1381.154795 1381.154795 1381.154795 1381.154795 1381.154795 2008-Apr-30 22:20:55 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.154795 sky0=1381.154795 sky1=1381.154795 sky2=1381.154795 sky3=1381.154795 sky4=1381.154795 sky5=1381.154795 sky6=1381.154795 sky7=1381.154795 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-30 22:20:55 LOG2 dopset_gen: Result from 'sky2syn': 1631.154795 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-30 22:20:55 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631154795.0} 2008-Apr-30 22:20:55 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 22:20:55 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-30 22:20:55 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-30 22:20:55 INFO5 fixed_driftmap: Tracking J2000 position: RA = 12:08:03.6 Dec = +07:10:21.9 2008-Apr-30 22:20:55 LOG3 track_source: Calling 'track_source AGESVC1A_p2_074 120803.6 071021.9 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-30 22:20:55 START begin_task: Starting task 'sending tracking commands' 2008-Apr-30 22:20:55 LOG5 begin_task: Level: (3) ID = <10423> Status = 0 0 0 0 ok 2008-Apr-30 22:20:55 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_074} INFO {Slewing to source 'AGESVC1A_p2_074' ...} 2008-Apr-30 22:20:55 INFO1 track_source: Starting to track AGESVC1A_p2_074 2008-Apr-30 22:20:55 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_074" 2008-Apr-30 22:20:55 LOG3 vw_send: To DATATAKING: set ra 120803.6 2008-Apr-30 22:20:55 LOG3 vw_send: To DATATAKING: set dec 071021.9 2008-Apr-30 22:20:55 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-30 22:20:55 LOG3 vw_send: To DATATAKING: pnt tr 120803.6 071021.9 -CJ 2008-Apr-30 22:20:55 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-30 22:20:55 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-30 22:20:55 LOG5 finish_task: Level: (3) ID = <10423> Status = 0 0 0 0 ok 2008-Apr-30 22:20:55 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-30 22:20:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 22:20:55 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-30 22:20:55 LOG5 end_task: Level: (3) ID = <10423> Status = 0 0 0 0 ok 2008-Apr-30 22:20:55 START begin_task: Starting task 'waiting on telescope' 2008-Apr-30 22:20:55 LOG5 begin_task: Level: (3) ID = <10424> Status = 0 0 0 0 ok 2008-Apr-30 22:20:55 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-30 22:20:55 LOG3 waittrk: Start waittrk 5 2008-Apr-30 22:20:55 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-30 22:20:55 LOG5 begin_task: Level: (4) ID = <10425> Status = 0 0 0 0 ok 2008-Apr-30 22:20:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631154795.0} 2008-Apr-30 22:20:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 22:20:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 22:20:55 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_074" 2008-Apr-30 22:20:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 22:20:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 22:20:55 LOG4 got_cormsg: From DATATAKING: set ra 120803.6 2008-Apr-30 22:20:55 LOG4 got_cormsg: From DATATAKING: set dec 071021.9 2008-Apr-30 22:20:55 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-30 22:20:55 LOG4 got_cormsg: From DATATAKING: pnt tr 120803.6 071021.9 -CJ 2008-Apr-30 22:20:55 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-30 22:20:55 LOG4 got_cormsg: From DATATAKING: 120803.6 2008-Apr-30 22:20:55 LOG4 got_cormsg: From DATATAKING: vw% 071021.9 2008-Apr-30 22:20:55 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2008-Apr-30 22:21:00 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-30 22:21:00 LOG5 end_task: Level: (4) ID = <10425> Status = 0 0 0 0 ok 2008-Apr-30 22:21:00 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-30 22:21:00 LOG5 begin_task: Level: (4) ID = <10426> Status = 0 0 0 0 ok 2008-Apr-30 22:21:02 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-30 22:21:02 LOG5 end_task: Level: (4) ID = <10426> Status = 0 0 0 0 ok 2008-Apr-30 22:21:02 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-30 22:21:02 INFO2 waittrk: Now tracking AGESVC1A_p2_074 2008-Apr-30 22:21:02 LOG4 waittrk: Current telescope position: Az = 387.03 ZA = 12.53 2008-Apr-30 22:21:02 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-30 22:21:02 LOG5 finish_task: Level: (3) ID = <10424> Status = 0 0 0 0 ok 2008-Apr-30 22:21:02 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-30 22:21:02 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 22:21:02 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-30 22:21:02 LOG5 end_task: Level: (3) ID = <10424> Status = 0 0 0 0 ok 2008-Apr-30 22:21:02 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-30 22:21:02 LOG5 begin_task: Level: (3) ID = <10427> Status = 0 0 0 0 ok 2008-Apr-30 22:21:02 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-30 22:21:02 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-30 22:21:02 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-30 22:21:02 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-30 22:21:02 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 22:21:02 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-30 22:21:02 LOG5 begin_task: Level: (4) ID = <10428> Status = 0 0 0 0 ok 2008-Apr-30 22:21:02 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-30 22:21:02 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 22:21:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 22:21:05 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-30 22:21:05 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-30 22:21:05 LOG5 end_task: Level: (4) ID = <10428> Status = 0 0 0 0 ok 2008-Apr-30 22:21:05 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-30 22:21:05 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-30 22:21:05 LOG5 begin_task: Level: (4) ID = <10429> Status = 0 0 0 0 ok 2008-Apr-30 22:21:05 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-30 22:21:05 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-30 22:21:05 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-30 22:21:05 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-30 22:21:06 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-30 22:21:06 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-30 22:21:06 LOG5 begin_task: Level: (5) ID = <10430> Status = 0 0 0 0 ok 2008-Apr-30 22:21:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 22:21:06 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-30 22:21:06 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 1 dB --- beam 1: 8 6 dB 2008-Apr-30 22:21:06 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 5 dB 2008-Apr-30 22:21:06 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-30 22:21:06 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 3 3 dB 2008-Apr-30 22:21:06 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-30 22:21:06 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-30 22:21:06 LOG5 end_task: Level: (5) ID = <10430> Status = 0 0 0 0 ok 2008-Apr-30 22:21:06 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.911 0.909 ALFA beam 1: 0.914 1.101 2008-Apr-30 22:21:06 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.029 0.940 ALFA beam 3: 0.971 1.044 2008-Apr-30 22:21:06 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.931 0.954 ALFA beam 5: 1.027 1.137 2008-Apr-30 22:21:06 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.056 1.053 ALFA beam 7: 0.921 0.937 2008-Apr-30 22:21:06 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-30 22:21:06 LOG5 finish_task: Level: (4) ID = <10429> Status = 0 0 0 0 ok 2008-Apr-30 22:21:06 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-30 22:21:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 22:21:06 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-30 22:21:06 LOG5 end_task: Level: (4) ID = <10429> Status = 0 0 0 0 ok 2008-Apr-30 22:21:06 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-30 22:21:06 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-30 22:21:06 LOG5 finish_task: Level: (3) ID = <10427> Status = 0 0 0 0 ok 2008-Apr-30 22:21:06 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-30 22:21:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 22:21:06 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-30 22:21:06 LOG5 end_task: Level: (3) ID = <10427> Status = 0 0 0 0 ok 2008-Apr-30 22:21:06 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 SS 2008-Apr-30 22:21:06 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 SS 2008-Apr-30 22:21:06 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 SS 2008-Apr-30 22:21:06 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 SS 2008-Apr-30 22:21:06 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-30 22:21:06 START begin_task: Starting task 'WAPP calibration' 2008-Apr-30 22:21:06 LOG5 begin_task: Level: (3) ID = <10431> Status = 0 0 0 0 ok 2008-Apr-30 22:21:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-30 22:21:06 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-30 22:21:06 START begin_task: Starting task 'selecting calibration type' 2008-Apr-30 22:21:06 LOG5 begin_task: Level: (4) ID = <10432> Status = 0 0 0 0 ok 2008-Apr-30 22:21:06 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-30 22:21:06 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-30 22:21:06 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 22:21:06 START begin_task: Starting task 'waiting on setcal' 2008-Apr-30 22:21:06 LOG5 begin_task: Level: (5) ID = <10433> Status = 0 0 0 0 ok 2008-Apr-30 22:21:07 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 SS' 2008-Apr-30 22:21:07 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-30 22:21:07 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 22:21:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 22:21:07 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-30 22:21:07 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-30 22:21:07 LOG5 end_task: Level: (5) ID = <10433> Status = 0 0 0 0 ok 2008-Apr-30 22:21:07 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-30 22:21:07 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-30 22:21:07 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-30 22:21:07 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-30 22:21:07 LOG5 begin_task: Level: (5) ID = <10434> Status = 0 0 0 0 ok 2008-Apr-30 22:21:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 22:21:07 NOTE WAPPDATA-new_file: New FITS file: wapp.20080430.a2048.0010.fits 2008-Apr-30 22:21:07 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080430.a2048.0010.fits} 2008-Apr-30 22:21:08 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-30 22:21:08 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-30 22:21:08 LOG5 end_task: Level: (5) ID = <10434> Status = 0 0 0 0 ok 2008-Apr-30 22:21:08 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-30 22:21:08 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-30 22:21:08 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-30 22:21:08 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-30 22:21:08 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-30 22:21:08 LOG5 begin_task: Level: (5) ID = <10435> Status = 0 0 0 0 ok 2008-Apr-30 22:21:08 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-30 22:21:08 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-30 22:21:08 LOG5 end_task: Level: (5) ID = <10435> Status = 0 0 0 0 ok 2008-Apr-30 22:21:08 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-30 22:21:08 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-30 22:21:08 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-30 22:21:08 LOG5 finish_task: Level: (4) ID = <10432> Status = 0 0 0 0 ok 2008-Apr-30 22:21:08 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-30 22:21:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 22:21:08 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-30 22:21:08 LOG5 end_task: Level: (4) ID = <10432> Status = 0 0 0 0 ok 2008-Apr-30 22:21:08 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-30 22:21:08 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-30 22:21:08 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-30 22:21:08 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-30 22:21:08 LOG5 begin_task: Level: (4) ID = <10436> Status = 0 0 0 0 ok 2008-Apr-30 22:21:08 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-30 22:21:08 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-30 22:21:08 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-30 22:21:08 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-30 22:21:08 LOG5 end_task: Level: (4) ID = <10436> Status = 0 0 0 0 ok 2008-Apr-30 22:21:08 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-30 22:21:08 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-30 22:21:08 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-30 22:21:08 LOG5 begin_task: Level: (4) ID = <10437> Status = 0 0 0 0 ok 2008-Apr-30 22:21:08 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-30 22:21:08 LOG5 log_alfabeam: Parameters: 12.134333333333334 7.1727499999999988 12.527875 2008.3338298222932 -3.500039 2008-Apr-30 22:21:08 LOG4 log_alfabeam: ALFABEAM 0 12.134333333333338 7.172749999999995 2008-Apr-30 22:21:08 LOG4 log_alfabeam: ALFABEAM 1 12.133947849684812 7.274762226455899 2008-Apr-30 22:21:08 LOG4 log_alfabeam: ALFABEAM 2 12.128643881631771 7.207410172821197 2008-Apr-30 22:21:08 LOG4 log_alfabeam: ALFABEAM 3 12.129031297427222 7.105213244694259 2008-Apr-30 22:21:08 LOG4 log_alfabeam: ALFABEAM 4 12.134766921831995 7.070606942981816 2008-Apr-30 22:21:08 LOG4 log_alfabeam: ALFABEAM 5 12.140035610111786 7.138700115207536 2008-Apr-30 22:21:08 LOG4 log_alfabeam: ALFABEAM 6 12.139604022029715 7.240658733862684 2008-Apr-30 22:21:08 INFO2 take_spectra: Starting WAPP scan: 812100126 2008-Apr-30 22:21:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-30 22:21:09 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-30 22:21:09 LOG5 begin_task: Level: (5) ID = <10438> Status = 0 0 0 0 ok 2008-Apr-30 22:21:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-30 22:21:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8470.00 2008-Apr-30 22:21:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.154795 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-30 22:21:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.154795 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 22:21:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.154795 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 22:21:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.154795 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-30 22:21:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.154795 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 22:21:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.530 > 1.4)! 2008-Apr-30 22:21:15 LOG4 check_wapp_levels: WAPP-1 power levels: 1.248 1.181 1.238 1.490 2008-Apr-30 22:21:15 LOG4 check_wapp_levels: WAPP-2 power levels: 1.400 1.296 1.347 1.430 2008-Apr-30 22:21:15 LOG4 check_wapp_levels: WAPP-3 power levels: 1.299 1.330 1.425 1.530 2008-Apr-30 22:21:15 LOG4 check_wapp_levels: WAPP-4 power levels: 1.466 1.459 1.277 1.298 2008-Apr-30 22:21:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.154795 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 22:21:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.154795 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 22:21:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.154795 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 22:21:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.154795 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 22:21:15 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-30 22:21:15 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-30 22:21:15 LOG5 end_task: Level: (5) ID = <10438> Status = 0 0 0 0 ok 2008-Apr-30 22:21:15 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-30 22:21:15 LOG5 end_task: Level: (4) ID = <10437> Status = 0 0 0 0 ok 2008-Apr-30 22:21:15 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-30 22:21:15 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-30 22:21:15 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-30 22:21:15 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-30 22:21:15 LOG5 begin_task: Level: (4) ID = <10439> Status = 0 0 0 0 ok 2008-Apr-30 22:21:15 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-30 22:21:15 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-30 22:21:15 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-30 22:21:15 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-30 22:21:15 LOG5 end_task: Level: (4) ID = <10439> Status = 0 0 0 0 ok 2008-Apr-30 22:21:15 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-30 22:21:15 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-30 22:21:15 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-30 22:21:15 LOG5 begin_task: Level: (4) ID = <10440> Status = 0 0 0 0 ok 2008-Apr-30 22:21:15 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-30 22:21:15 LOG5 log_alfabeam: Parameters: 12.134333333333334 7.1727499999999988 12.529824 2008.3338300441098 -3.500039 2008-Apr-30 22:21:15 LOG4 log_alfabeam: ALFABEAM 0 12.134333333333339 7.172749999999996 2008-Apr-30 22:21:15 LOG4 log_alfabeam: ALFABEAM 1 12.133961356789168 7.274773421783367 2008-Apr-30 22:21:15 LOG4 log_alfabeam: ALFABEAM 2 12.128648481240550 7.207576897939798 2008-Apr-30 22:21:15 LOG4 log_alfabeam: ALFABEAM 3 12.129022368820024 7.105368913490846 2008-Apr-30 22:21:15 LOG4 log_alfabeam: ALFABEAM 4 12.134753352583106 7.070594473778201 2008-Apr-30 22:21:15 LOG4 log_alfabeam: ALFABEAM 5 12.140031075534946 7.138532354261487 2008-Apr-30 22:21:15 LOG4 log_alfabeam: ALFABEAM 6 12.139613035453062 7.240503578638555 2008-Apr-30 22:21:15 INFO2 take_spectra: Starting WAPP scan: 812100127 2008-Apr-30 22:21:16 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-30 22:21:16 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-30 22:21:16 LOG5 begin_task: Level: (5) ID = <10441> Status = 0 0 0 0 ok 2008-Apr-30 22:21:16 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-30 22:21:16 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8477.00 2008-Apr-30 22:21:21 INFO5 check_wapp_levels: WAPP power levels are between 1.181 and 1.530 (still bad) 2008-Apr-30 22:21:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.154795 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-30 22:21:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.154795 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 22:21:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.154795 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 22:21:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.154795 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-30 22:21:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.154795 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 22:21:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.154795 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 22:21:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.154795 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 22:21:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.154795 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 22:21:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.154795 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 22:21:22 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-30 22:21:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-30 22:21:22 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-30 22:21:22 LOG5 end_task: Level: (5) ID = <10441> Status = 0 0 0 0 ok 2008-Apr-30 22:21:22 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-30 22:21:22 LOG5 end_task: Level: (4) ID = <10440> Status = 0 0 0 0 ok 2008-Apr-30 22:21:22 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-30 22:21:22 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-30 22:21:22 LOG5 finish_task: Level: (3) ID = <10431> Status = 0 0 0 0 ok 2008-Apr-30 22:21:22 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-30 22:21:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 22:21:22 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-30 22:21:22 LOG5 end_task: Level: (3) ID = <10431> Status = 0 0 0 0 ok 2008-Apr-30 22:21:22 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-30 22:21:22 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 27.24 and ZA = 12.55 2008-Apr-30 22:21:22 LOG3 track_source: Calling 'track_source AGESVC1A_p2_074 27.24 12.5459282098 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-30 22:21:22 START begin_task: Starting task 'sending tracking commands' 2008-Apr-30 22:21:22 LOG5 begin_task: Level: (3) ID = <10442> Status = 0 0 0 0 ok 2008-Apr-30 22:21:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_074} INFO {Slewing to source 'AGESVC1A_p2_074' ...} 2008-Apr-30 22:21:22 INFO1 track_source: Starting to track AGESVC1A_p2_074 2008-Apr-30 22:21:22 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_074" 2008-Apr-30 22:21:22 LOG3 vw_send: To DATATAKING: set ra 27.24 2008-Apr-30 22:21:22 LOG3 vw_send: To DATATAKING: set dec 12.5459282098 2008-Apr-30 22:21:22 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-30 22:21:22 LOG3 vw_send: To DATATAKING: pnt tr 27.24 12.5459282098 -CF 2008-Apr-30 22:21:22 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-30 22:21:22 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-30 22:21:22 LOG5 finish_task: Level: (3) ID = <10442> Status = 0 0 0 0 ok 2008-Apr-30 22:21:22 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-30 22:21:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 22:21:23 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-30 22:21:23 LOG5 end_task: Level: (3) ID = <10442> Status = 0 0 0 0 ok 2008-Apr-30 22:21:23 LOG1 fixed_driftmap: Parameters: HA = +00:23:00.2 Start = 12:32:27.3 LST = 12:31:54.4 diff = 32.9 secs 2008-Apr-30 22:21:23 INFO2 fixed_driftmap: Waiting 30.9 seconds for RA 12:09:27 2008-Apr-30 22:21:23 INFO2 lstwait: Waiting for 30.8 secs from LST 12:31:54 to LST 12:32:25 ... 2008-Apr-30 22:21:23 LOG4 send_obs_status: To obs_status: <1> TASKTIME 30.841903548050578 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-30 22:21:23 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-30 22:21:23 LOG5 begin_task: Level: (3) ID = <10443> Status = 0 0 0 0 ok 2008-Apr-30 22:21:23 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_074" 2008-Apr-30 22:21:23 LOG4 got_cormsg: From DATATAKING: set ra 27.24 2008-Apr-30 22:21:23 LOG4 got_cormsg: From DATATAKING: set dec 12.5459282098 2008-Apr-30 22:21:23 LOG4 got_cormsg: From DATATAKING: vw% 27.24 2008-Apr-30 22:21:23 LOG4 got_cormsg: From DATATAKING: vw% 12.5459282098 2008-Apr-30 22:21:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 22:21:23 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-30 22:21:23 LOG4 got_cormsg: From DATATAKING: pnt tr 27.24 12.5459282098 -CF 2008-Apr-30 22:21:23 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-30 22:21:23 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-30 22:21:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 22:21:27 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.906 and 1.140 2008-Apr-30 22:21:53 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-30 22:21:53 LOG5 end_task: Level: (3) ID = <10443> Status = 0 0 0 0 ok 2008-Apr-30 22:21:53 LOG4 lstwait: Finished waiting, the gui caused difference: 0.15965515999809554 2008-Apr-30 22:21:53 INFO3 lstwait: Finished waiting 2008-Apr-30 22:21:53 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-30 22:21:54 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-30 22:21:54 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-30 22:21:54 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-30 22:21:54 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-30 22:21:54 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-30 22:21:54 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-30 22:21:54 LOG5 begin_task: Level: (3) ID = <10444> Status = 0 0 0 0 ok 2008-Apr-30 22:21:54 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-30 22:21:54 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-30 22:21:54 INFO2 take_spectra: Starting WAPP scan: 812100128 2008-Apr-30 22:21:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-30 22:21:54 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-30 22:21:54 LOG5 begin_task: Level: (4) ID = <10445> Status = 0 0 0 0 ok 2008-Apr-30 22:21:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-30 22:21:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8515.00 2008-Apr-30 22:21:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.154795 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-30 22:21:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.154795 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 22:21:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.154795 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 22:21:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.154795 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-30 22:21:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.154795 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 22:21:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.154795 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 22:21:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.154795 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 22:21:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.154795 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 22:21:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.154795 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 22:31:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.694 < 0.8)! 2008-Apr-30 22:31:01 LOG4 check_wapp_levels: WAPP-1 power levels: 0.918 0.694 0.928 1.110 2008-Apr-30 22:31:01 LOG4 check_wapp_levels: WAPP-2 power levels: 1.029 0.943 0.976 1.044 2008-Apr-30 22:31:01 LOG4 check_wapp_levels: WAPP-3 power levels: 0.932 0.951 1.031 1.144 2008-Apr-30 22:31:01 LOG4 check_wapp_levels: WAPP-4 power levels: 1.058 1.053 0.920 0.936 2008-Apr-30 22:31:03 INFO5 check_wapp_levels: WAPP power levels are between 0.746 and 1.143 (still bad) 2008-Apr-30 22:31:05 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.920 and 1.144 2008-Apr-30 22:31:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.664 < 0.8)! 2008-Apr-30 22:31:21 LOG4 check_wapp_levels: WAPP-1 power levels: 0.922 0.664 0.933 1.110 2008-Apr-30 22:31:21 LOG4 check_wapp_levels: WAPP-2 power levels: 1.030 0.944 0.974 1.045 2008-Apr-30 22:31:21 LOG4 check_wapp_levels: WAPP-3 power levels: 0.940 0.953 1.036 1.145 2008-Apr-30 22:31:21 LOG4 check_wapp_levels: WAPP-4 power levels: 1.058 1.054 0.920 0.938 2008-Apr-30 22:31:23 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.909 and 1.144 2008-Apr-30 22:31:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.780 < 0.8)! 2008-Apr-30 22:31:45 LOG4 check_wapp_levels: WAPP-1 power levels: 0.921 0.780 0.932 1.112 2008-Apr-30 22:31:45 LOG4 check_wapp_levels: WAPP-2 power levels: 1.028 0.943 0.976 1.045 2008-Apr-30 22:31:45 LOG4 check_wapp_levels: WAPP-3 power levels: 0.935 0.952 1.032 1.145 2008-Apr-30 22:31:45 LOG4 check_wapp_levels: WAPP-4 power levels: 1.057 1.055 0.921 0.937 2008-Apr-30 22:31:47 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.817 and 1.145 2008-Apr-30 22:31:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.689 < 0.8)! 2008-Apr-30 22:31:49 LOG4 check_wapp_levels: WAPP-1 power levels: 0.933 0.689 0.936 1.113 2008-Apr-30 22:31:49 LOG4 check_wapp_levels: WAPP-2 power levels: 1.029 0.944 0.974 1.044 2008-Apr-30 22:31:49 LOG4 check_wapp_levels: WAPP-3 power levels: 0.938 0.952 1.039 1.145 2008-Apr-30 22:31:49 LOG4 check_wapp_levels: WAPP-4 power levels: 1.058 1.055 0.921 0.939 2008-Apr-30 22:31:51 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.898 and 1.146 2008-Apr-30 22:31:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.754 < 0.8)! 2008-Apr-30 22:31:57 LOG4 check_wapp_levels: WAPP-1 power levels: 0.927 0.754 0.935 1.114 2008-Apr-30 22:31:57 LOG4 check_wapp_levels: WAPP-2 power levels: 1.029 0.942 0.975 1.044 2008-Apr-30 22:31:57 LOG4 check_wapp_levels: WAPP-3 power levels: 0.937 0.953 1.034 1.144 2008-Apr-30 22:31:57 LOG4 check_wapp_levels: WAPP-4 power levels: 1.058 1.056 0.921 0.939 2008-Apr-30 22:31:59 INFO5 check_wapp_levels: WAPP power levels are between 0.791 and 1.145 (still bad) 2008-Apr-30 22:32:01 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.900 and 1.144 2008-Apr-30 22:33:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.798 < 0.8)! 2008-Apr-30 22:33:20 LOG4 check_wapp_levels: WAPP-1 power levels: 0.918 0.798 0.933 1.114 2008-Apr-30 22:33:20 LOG4 check_wapp_levels: WAPP-2 power levels: 1.028 0.942 0.977 1.047 2008-Apr-30 22:33:20 LOG4 check_wapp_levels: WAPP-3 power levels: 0.930 0.950 1.032 1.142 2008-Apr-30 22:33:20 LOG4 check_wapp_levels: WAPP-4 power levels: 1.057 1.055 0.921 0.938 2008-Apr-30 22:33:22 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.830 and 1.143 2008-Apr-30 22:34:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.756 < 0.8)! 2008-Apr-30 22:34:15 LOG4 check_wapp_levels: WAPP-1 power levels: 0.916 0.756 0.927 1.116 2008-Apr-30 22:34:15 LOG4 check_wapp_levels: WAPP-2 power levels: 1.030 0.941 0.976 1.043 2008-Apr-30 22:34:15 LOG4 check_wapp_levels: WAPP-3 power levels: 0.933 0.953 1.033 1.144 2008-Apr-30 22:34:15 LOG4 check_wapp_levels: WAPP-4 power levels: 1.059 1.058 0.922 0.941 2008-Apr-30 22:34:17 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.876 and 1.143 2008-Apr-30 22:34:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.794 < 0.8)! 2008-Apr-30 22:34:29 LOG4 check_wapp_levels: WAPP-1 power levels: 0.917 0.794 0.929 1.117 2008-Apr-30 22:34:29 LOG4 check_wapp_levels: WAPP-2 power levels: 1.030 0.941 0.976 1.042 2008-Apr-30 22:34:29 LOG4 check_wapp_levels: WAPP-3 power levels: 0.932 0.953 1.033 1.144 2008-Apr-30 22:34:29 LOG4 check_wapp_levels: WAPP-4 power levels: 1.057 1.055 0.921 0.939 2008-Apr-30 22:34:31 INFO5 check_wapp_levels: WAPP power levels are between 0.781 and 1.144 (still bad) 2008-Apr-30 22:34:33 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.900 and 1.146 2008-Apr-30 22:35:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.772 < 0.8)! 2008-Apr-30 22:35:36 LOG4 check_wapp_levels: WAPP-1 power levels: 0.914 0.772 0.927 1.112 2008-Apr-30 22:35:36 LOG4 check_wapp_levels: WAPP-2 power levels: 1.031 0.943 0.976 1.045 2008-Apr-30 22:35:36 LOG4 check_wapp_levels: WAPP-3 power levels: 0.940 0.960 1.035 1.147 2008-Apr-30 22:35:36 LOG4 check_wapp_levels: WAPP-4 power levels: 1.061 1.058 0.924 0.940 2008-Apr-30 22:35:38 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.815 and 1.147 2008-Apr-30 22:35:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.681 < 0.8)! 2008-Apr-30 22:35:50 LOG4 check_wapp_levels: WAPP-1 power levels: 0.916 0.681 0.931 1.114 2008-Apr-30 22:35:50 LOG4 check_wapp_levels: WAPP-2 power levels: 1.033 0.944 0.979 1.045 2008-Apr-30 22:35:50 LOG4 check_wapp_levels: WAPP-3 power levels: 0.944 0.960 1.035 1.151 2008-Apr-30 22:35:50 LOG4 check_wapp_levels: WAPP-4 power levels: 1.062 1.057 0.925 0.942 2008-Apr-30 22:35:52 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.880 and 1.152 2008-Apr-30 22:35:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.765 < 0.8)! 2008-Apr-30 22:35:58 LOG4 check_wapp_levels: WAPP-1 power levels: 0.919 0.765 0.931 1.116 2008-Apr-30 22:35:58 LOG4 check_wapp_levels: WAPP-2 power levels: 1.031 0.944 0.978 1.045 2008-Apr-30 22:35:58 LOG4 check_wapp_levels: WAPP-3 power levels: 0.944 0.963 1.035 1.150 2008-Apr-30 22:35:58 LOG4 check_wapp_levels: WAPP-4 power levels: 1.062 1.056 0.923 0.941 2008-Apr-30 22:36:00 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.919 and 1.149 2008-Apr-30 22:36:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.579 < 0.8)! 2008-Apr-30 22:36:23 LOG4 check_wapp_levels: WAPP-1 power levels: 0.919 0.579 0.929 1.118 2008-Apr-30 22:36:23 LOG4 check_wapp_levels: WAPP-2 power levels: 1.030 0.945 0.976 1.047 2008-Apr-30 22:36:23 LOG4 check_wapp_levels: WAPP-3 power levels: 0.946 0.967 1.034 1.150 2008-Apr-30 22:36:23 LOG4 check_wapp_levels: WAPP-4 power levels: 1.063 1.056 0.925 0.941 2008-Apr-30 22:36:25 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.903 and 1.150 2008-Apr-30 22:36:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.771 < 0.8)! 2008-Apr-30 22:36:31 LOG4 check_wapp_levels: WAPP-1 power levels: 0.918 0.771 0.930 1.119 2008-Apr-30 22:36:31 LOG4 check_wapp_levels: WAPP-2 power levels: 1.032 0.945 0.978 1.046 2008-Apr-30 22:36:31 LOG4 check_wapp_levels: WAPP-3 power levels: 0.943 0.963 1.034 1.151 2008-Apr-30 22:36:31 LOG4 check_wapp_levels: WAPP-4 power levels: 1.062 1.058 0.923 0.941 2008-Apr-30 22:36:33 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.872 and 1.149 2008-Apr-30 22:36:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.765 < 0.8)! 2008-Apr-30 22:36:53 LOG4 check_wapp_levels: WAPP-1 power levels: 0.918 0.765 0.928 1.118 2008-Apr-30 22:36:53 LOG4 check_wapp_levels: WAPP-2 power levels: 1.034 0.945 0.981 1.048 2008-Apr-30 22:36:53 LOG4 check_wapp_levels: WAPP-3 power levels: 0.940 0.959 1.033 1.148 2008-Apr-30 22:36:53 LOG4 check_wapp_levels: WAPP-4 power levels: 1.059 1.056 0.924 0.941 2008-Apr-30 22:36:55 INFO5 check_wapp_levels: WAPP power levels are between 0.799 and 1.148 (still bad) 2008-Apr-30 22:36:57 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.898 and 1.148 2008-Apr-30 22:37:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.653 < 0.8)! 2008-Apr-30 22:37:19 LOG4 check_wapp_levels: WAPP-1 power levels: 0.914 0.653 0.929 1.118 2008-Apr-30 22:37:19 LOG4 check_wapp_levels: WAPP-2 power levels: 1.034 0.944 0.977 1.046 2008-Apr-30 22:37:19 LOG4 check_wapp_levels: WAPP-3 power levels: 0.941 0.959 1.036 1.149 2008-Apr-30 22:37:19 LOG4 check_wapp_levels: WAPP-4 power levels: 1.061 1.056 0.926 0.941 2008-Apr-30 22:37:21 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.814 and 1.150 2008-Apr-30 22:41:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-30 22:41:55 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-30 22:41:55 LOG5 end_task: Level: (4) ID = <10445> Status = 0 0 0 0 ok 2008-Apr-30 22:41:55 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-30 22:41:55 LOG5 end_task: Level: (3) ID = <10444> Status = 0 0 0 0 ok 2008-Apr-30 22:41:55 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-30 22:41:55 LOG5 finish_task: Level: (2) ID = <10411> Status = 0 0 0 0 ok 2008-Apr-30 22:41:55 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-30 22:41:55 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-30 22:41:55 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-30 22:41:55 LOG5 end_task: Level: (2) ID = <10411> Status = 0 0 0 0 ok 2008-Apr-30 22:41:55 COMMAND run_command_line: EXECUTING command 47: 'FIXEDDRIFT az=46.27 alfaangle=-20.2 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_076 ra=120900.00 dec=70730.00' 2008-Apr-30 22:41:55 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-30 22:41:56 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-30 22:41:56 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 46.27 -20.2 hcorcal 5 tracking no first 1 AGESVC1A_p2_076 120900.00 70730.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-30 22:41:56 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-30 22:41:56 LOG5 begin_task: Level: (2) ID = <10446> Status = 0 0 0 0 ok 2008-Apr-30 22:41:56 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGESVC1A_p2_074' 2008-Apr-30 22:41:56 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-30 22:41:56 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1A_p2_076} 2008-Apr-30 22:41:56 INFO3 fixed_driftmap: Sending telescope to Az = 46.27 and ZA = 15.89 2008-Apr-30 22:41:56 LOG3 track_source: Calling 'track_source AGESVC1A_p2_076 46.27 15.8920922295 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-30 22:41:56 START begin_task: Starting task 'sending tracking commands' 2008-Apr-30 22:41:56 LOG5 begin_task: Level: (3) ID = <10447> Status = 0 0 0 0 ok 2008-Apr-30 22:41:56 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_076} INFO {Slewing to source 'AGESVC1A_p2_076' ...} 2008-Apr-30 22:41:56 INFO1 track_source: Starting to track AGESVC1A_p2_076 2008-Apr-30 22:41:56 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_076" 2008-Apr-30 22:41:56 LOG3 vw_send: To DATATAKING: set ra 46.27 2008-Apr-30 22:41:56 LOG3 vw_send: To DATATAKING: set dec 15.8920922295 2008-Apr-30 22:41:56 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-30 22:41:56 LOG3 vw_send: To DATATAKING: pnt tr 46.27 15.8920922295 -CF 2008-Apr-30 22:41:56 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-30 22:41:56 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-30 22:41:56 LOG5 finish_task: Level: (3) ID = <10447> Status = 0 0 0 0 ok 2008-Apr-30 22:41:56 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-30 22:41:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 22:41:56 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-30 22:41:56 LOG5 end_task: Level: (3) ID = <10447> Status = 0 0 0 0 ok 2008-Apr-30 22:41:56 START begin_task: Starting task 'rotate ALFA to -20.2 degrees' 2008-Apr-30 22:41:56 LOG5 begin_task: Level: (3) ID = <10448> Status = 0 0 0 0 ok 2008-Apr-30 22:41:56 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -20.2 degrees ...} 2008-Apr-30 22:41:56 INFO2 rotate_alfa: ALFA commanded to -20.2 degrees 2008-Apr-30 22:41:56 LOG3 sock_errsend: To ALFAMOTOR: POSITION -20.2 REPLY 2008-Apr-30 22:41:56 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-30 22:41:56 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-30 22:41:56 LOG5 begin_task: Level: (4) ID = <10449> Status = 0 0 0 0 ok 2008-Apr-30 22:41:56 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_076" 2008-Apr-30 22:41:56 LOG4 got_cormsg: From DATATAKING: set ra 46.27 2008-Apr-30 22:41:56 LOG4 got_cormsg: From DATATAKING: set dec 15.8920922295 2008-Apr-30 22:41:56 LOG4 got_cormsg: From DATATAKING: vw% 46.27 2008-Apr-30 22:41:56 LOG4 got_cormsg: From DATATAKING: vw% 15.8920922295 2008-Apr-30 22:41:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 22:41:56 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-30 22:41:56 LOG4 got_cormsg: From DATATAKING: pnt tr 46.27 15.8920922295 -CF 2008-Apr-30 22:41:56 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-30 22:41:56 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-30 22:41:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 22:42:07 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-30 22:42:07 INFO3 alfa_motor: ALFA rotator in-position -20.20 degrees 2008-Apr-30 22:42:07 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-30 22:42:07 LOG5 end_task: Level: (4) ID = <10449> Status = 0 0 0 0 ok 2008-Apr-30 22:42:07 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-30 22:42:07 STOP finish_task: Finishing task 'rotate ALFA to -20.2 degrees' 2008-Apr-30 22:42:07 LOG5 finish_task: Level: (3) ID = <10448> Status = 0 0 0 0 ok 2008-Apr-30 22:42:07 INFO2 finish_task: DONE finished configuration: rotating ALFA to -20.2 degrees 2008-Apr-30 22:42:07 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 22:42:07 STOP end_task: Finishing task 'rotate ALFA to -20.2 degrees' with status 'OK' 2008-Apr-30 22:42:07 LOG5 end_task: Level: (3) ID = <10448> Status = 0 0 0 0 ok 2008-Apr-30 22:42:07 START begin_task: Starting task 'waiting on telescope' 2008-Apr-30 22:42:07 LOG5 begin_task: Level: (3) ID = <10450> Status = 0 0 0 0 ok 2008-Apr-30 22:42:07 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-30 22:42:07 LOG3 waittrk: Start waittrk 5 2008-Apr-30 22:42:07 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-30 22:42:07 LOG5 begin_task: Level: (4) ID = <10451> Status = 0 0 0 0 ok 2008-Apr-30 22:42:12 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-30 22:42:12 LOG5 end_task: Level: (4) ID = <10451> Status = 0 0 0 0 ok 2008-Apr-30 22:42:12 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-30 22:42:12 LOG5 begin_task: Level: (4) ID = <10452> Status = 0 0 0 0 ok 2008-Apr-30 22:43:26 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-30 22:43:26 LOG5 end_task: Level: (4) ID = <10452> Status = 0 0 0 0 ok 2008-Apr-30 22:43:26 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-30 22:43:26 INFO2 waittrk: Now tracking AGESVC1A_p2_076 2008-Apr-30 22:43:26 LOG4 waittrk: Current telescope position: Az = 406.04 ZA = 15.88 2008-Apr-30 22:43:26 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-30 22:43:26 LOG5 finish_task: Level: (3) ID = <10450> Status = 0 0 0 0 ok 2008-Apr-30 22:43:26 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-30 22:43:26 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 22:43:26 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-30 22:43:26 LOG5 end_task: Level: (3) ID = <10450> Status = 0 0 0 0 ok 2008-Apr-30 22:43:26 START begin_task: Starting task 'selecting calibration type' 2008-Apr-30 22:43:26 LOG5 begin_task: Level: (3) ID = <10453> Status = 0 0 0 0 ok 2008-Apr-30 22:43:26 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-30 22:43:26 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-30 22:43:26 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 22:43:26 START begin_task: Starting task 'waiting on setcal' 2008-Apr-30 22:43:26 LOG5 begin_task: Level: (4) ID = <10454> Status = 0 0 0 0 ok 2008-Apr-30 22:43:26 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-30 22:43:26 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 22:43:27 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 22:43:27 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-30 22:43:27 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-30 22:43:27 LOG5 end_task: Level: (4) ID = <10454> Status = 0 0 0 0 ok 2008-Apr-30 22:43:27 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-30 22:43:27 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-30 22:43:27 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-30 22:43:27 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-30 22:43:27 LOG5 begin_task: Level: (4) ID = <10455> Status = 0 0 0 0 ok 2008-Apr-30 22:43:27 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 22:43:28 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-30 22:43:28 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-30 22:43:28 LOG5 end_task: Level: (4) ID = <10455> Status = 0 0 0 0 ok 2008-Apr-30 22:43:28 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-30 22:43:28 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-30 22:43:28 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-30 22:43:28 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-30 22:43:28 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-30 22:43:28 LOG5 begin_task: Level: (4) ID = <10456> Status = 0 0 0 0 ok 2008-Apr-30 22:43:28 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-30 22:43:28 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-30 22:43:28 LOG5 end_task: Level: (4) ID = <10456> Status = 0 0 0 0 ok 2008-Apr-30 22:43:28 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-30 22:43:28 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-30 22:43:28 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-30 22:43:28 LOG5 finish_task: Level: (3) ID = <10453> Status = 0 0 0 0 ok 2008-Apr-30 22:43:28 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-30 22:43:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 22:43:28 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-30 22:43:28 LOG5 end_task: Level: (3) ID = <10453> Status = 0 0 0 0 ok 2008-Apr-30 22:43:28 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2008-Apr-30 22:43:28 INFO2 astwait: Waiting for 23 seconds from 02:43:28 to 02:43:51 UTC ... 2008-Apr-30 22:43:28 LOG4 send_obs_status: To obs_status: <1> TASKTIME 23 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-30 22:43:28 START begin_task: Starting task 'waiting on waiting for AST time' 2008-Apr-30 22:43:28 LOG5 begin_task: Level: (3) ID = <10457> Status = 0 0 0 0 ok 2008-Apr-30 22:43:45 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 22:43:45.303 (seconds: 81825.303)!} 2008-Apr-30 22:43:45 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 22:43:45.303 (seconds: 81825.303)! 2008-Apr-30 22:43:51 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2008-Apr-30 22:43:51 LOG5 end_task: Level: (3) ID = <10457> Status = 0 0 0 0 ok 2008-Apr-30 22:43:51 INFO3 astwait: Finished waiting 2008-Apr-30 22:43:51 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-30 22:43:51 LOG5 dopset_later: Calling 'dopset_later 61.162633564338201' 2008-Apr-30 22:43:51 INFO3 dopset_later: Setting Doppler correction for 22:44:51 (61.2 seconds from now) 2008-Apr-30 22:43:51 LOG5 antvel: Calling 'antvel 46.270000 15.892092 F 61.162633564338201' 2008-Apr-30 22:43:51 LOG2 antvel: Parameters to Doppler: Heliocentric 96291 2008 121 0.0 2008-Apr-30 22:43:51 INFO5 antvel: Computed antenna velocity: +19.28248 km/s 2008-Apr-30 22:43:51 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=19.282484415100001 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-30 22:43:51 INFO4 dopset_gen: New sky frequencies: 1381.154593 1381.154593 1381.154593 1381.154593 1381.154593 1381.154593 1381.154593 1381.154593 1381.154593 2008-Apr-30 22:43:51 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.154593 sky0=1381.154593 sky1=1381.154593 sky2=1381.154593 sky3=1381.154593 sky4=1381.154593 sky5=1381.154593 sky6=1381.154593 sky7=1381.154593 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-30 22:43:51 LOG2 dopset_gen: Result from 'sky2syn': 1631.154593 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-30 22:43:51 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631154593.0} 2008-Apr-30 22:43:51 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 22:43:51 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-30 22:43:51 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-30 22:43:51 INFO5 fixed_driftmap: Tracking J2000 position: RA = 12:08:03.2 Dec = +07:07:21.8 2008-Apr-30 22:43:51 LOG3 track_source: Calling 'track_source AGESVC1A_p2_076 120803.2 070721.8 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-30 22:43:51 START begin_task: Starting task 'sending tracking commands' 2008-Apr-30 22:43:51 LOG5 begin_task: Level: (3) ID = <10458> Status = 0 0 0 0 ok 2008-Apr-30 22:43:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_076} INFO {Slewing to source 'AGESVC1A_p2_076' ...} 2008-Apr-30 22:43:51 INFO1 track_source: Starting to track AGESVC1A_p2_076 2008-Apr-30 22:43:51 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_076" 2008-Apr-30 22:43:51 LOG3 vw_send: To DATATAKING: set ra 120803.2 2008-Apr-30 22:43:51 LOG3 vw_send: To DATATAKING: set dec 070721.8 2008-Apr-30 22:43:51 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-30 22:43:51 LOG3 vw_send: To DATATAKING: pnt tr 120803.2 070721.8 -CJ 2008-Apr-30 22:43:51 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-30 22:43:51 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-30 22:43:51 LOG5 finish_task: Level: (3) ID = <10458> Status = 0 0 0 0 ok 2008-Apr-30 22:43:51 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-30 22:43:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 22:43:51 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-30 22:43:51 LOG5 end_task: Level: (3) ID = <10458> Status = 0 0 0 0 ok 2008-Apr-30 22:43:51 START begin_task: Starting task 'waiting on telescope' 2008-Apr-30 22:43:51 LOG5 begin_task: Level: (3) ID = <10459> Status = 0 0 0 0 ok 2008-Apr-30 22:43:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-30 22:43:51 LOG3 waittrk: Start waittrk 5 2008-Apr-30 22:43:51 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-30 22:43:51 LOG5 begin_task: Level: (4) ID = <10460> Status = 0 0 0 0 ok 2008-Apr-30 22:43:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631154593.0} 2008-Apr-30 22:43:51 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 22:43:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 22:43:51 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_076" 2008-Apr-30 22:43:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 22:43:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 22:43:51 LOG4 got_cormsg: From DATATAKING: set ra 120803.2 2008-Apr-30 22:43:51 LOG4 got_cormsg: From DATATAKING: set dec 070721.8 2008-Apr-30 22:43:51 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-30 22:43:51 LOG4 got_cormsg: From DATATAKING: pnt tr 120803.2 070721.8 -CJ 2008-Apr-30 22:43:51 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-30 22:43:51 LOG4 got_cormsg: From DATATAKING: 120803.2 2008-Apr-30 22:43:51 LOG4 got_cormsg: From DATATAKING: vw% 070721.8 2008-Apr-30 22:43:51 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2008-Apr-30 22:43:56 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-30 22:43:56 LOG5 end_task: Level: (4) ID = <10460> Status = 0 0 0 0 ok 2008-Apr-30 22:43:56 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-30 22:43:56 LOG5 begin_task: Level: (4) ID = <10461> Status = 0 0 0 0 ok 2008-Apr-30 22:43:58 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-30 22:43:58 LOG5 end_task: Level: (4) ID = <10461> Status = 0 0 0 0 ok 2008-Apr-30 22:43:58 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-30 22:43:58 INFO2 waittrk: Now tracking AGESVC1A_p2_076 2008-Apr-30 22:43:58 LOG4 waittrk: Current telescope position: Az = 406.08 ZA = 15.89 2008-Apr-30 22:43:58 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-30 22:43:58 LOG5 finish_task: Level: (3) ID = <10459> Status = 0 0 0 0 ok 2008-Apr-30 22:43:58 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-30 22:43:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 22:43:58 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-30 22:43:58 LOG5 end_task: Level: (3) ID = <10459> Status = 0 0 0 0 ok 2008-Apr-30 22:43:58 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-30 22:43:58 LOG5 begin_task: Level: (3) ID = <10462> Status = 0 0 0 0 ok 2008-Apr-30 22:43:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-30 22:43:58 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-30 22:43:58 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-30 22:43:58 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-30 22:43:58 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 22:43:58 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-30 22:43:58 LOG5 begin_task: Level: (4) ID = <10463> Status = 0 0 0 0 ok 2008-Apr-30 22:43:59 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-30 22:43:59 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 22:44:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 22:44:01 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-30 22:44:01 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-30 22:44:01 LOG5 end_task: Level: (4) ID = <10463> Status = 0 0 0 0 ok 2008-Apr-30 22:44:01 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-30 22:44:01 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-30 22:44:01 LOG5 begin_task: Level: (4) ID = <10464> Status = 0 0 0 0 ok 2008-Apr-30 22:44:01 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-30 22:44:01 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-30 22:44:01 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-30 22:44:01 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-30 22:44:02 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-30 22:44:02 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-30 22:44:02 LOG5 begin_task: Level: (5) ID = <10465> Status = 0 0 0 0 ok 2008-Apr-30 22:44:02 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-30 22:44:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 22:44:02 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 0 dB --- beam 1: 8 6 dB 2008-Apr-30 22:44:02 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 6 dB 2008-Apr-30 22:44:02 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-30 22:44:02 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 3 3 dB 2008-Apr-30 22:44:02 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-30 22:44:02 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-30 22:44:02 LOG5 end_task: Level: (5) ID = <10465> Status = 0 0 0 0 ok 2008-Apr-30 22:44:02 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.935 1.045 ALFA beam 1: 0.922 1.107 2008-Apr-30 22:44:02 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.076 0.988 ALFA beam 3: 1.052 1.116 2008-Apr-30 22:44:02 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.988 1.011 ALFA beam 5: 1.076 0.937 2008-Apr-30 22:44:02 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.107 1.095 ALFA beam 7: 0.964 0.975 2008-Apr-30 22:44:02 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-30 22:44:02 LOG5 finish_task: Level: (4) ID = <10464> Status = 0 0 0 0 ok 2008-Apr-30 22:44:02 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-30 22:44:02 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 22:44:02 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-30 22:44:02 LOG5 end_task: Level: (4) ID = <10464> Status = 0 0 0 0 ok 2008-Apr-30 22:44:02 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-30 22:44:02 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-30 22:44:02 LOG5 finish_task: Level: (3) ID = <10462> Status = 0 0 0 0 ok 2008-Apr-30 22:44:02 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-30 22:44:02 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 22:44:02 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-30 22:44:02 LOG5 end_task: Level: (3) ID = <10462> Status = 0 0 0 0 ok 2008-Apr-30 22:44:02 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 SS 2008-Apr-30 22:44:02 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 SS 2008-Apr-30 22:44:02 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 SS 2008-Apr-30 22:44:02 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 SS 2008-Apr-30 22:44:02 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-30 22:44:02 START begin_task: Starting task 'WAPP calibration' 2008-Apr-30 22:44:02 LOG5 begin_task: Level: (3) ID = <10466> Status = 0 0 0 0 ok 2008-Apr-30 22:44:02 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-30 22:44:02 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-30 22:44:02 START begin_task: Starting task 'selecting calibration type' 2008-Apr-30 22:44:02 LOG5 begin_task: Level: (4) ID = <10467> Status = 0 0 0 0 ok 2008-Apr-30 22:44:02 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-30 22:44:02 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-30 22:44:02 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 22:44:02 START begin_task: Starting task 'waiting on setcal' 2008-Apr-30 22:44:02 LOG5 begin_task: Level: (5) ID = <10468> Status = 0 0 0 0 ok 2008-Apr-30 22:44:03 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 SS' 2008-Apr-30 22:44:03 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-30 22:44:03 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 22:44:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 22:44:03 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-30 22:44:03 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-30 22:44:03 LOG5 end_task: Level: (5) ID = <10468> Status = 0 0 0 0 ok 2008-Apr-30 22:44:03 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-30 22:44:03 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-30 22:44:03 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-30 22:44:03 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-30 22:44:03 LOG5 begin_task: Level: (5) ID = <10469> Status = 0 0 0 0 ok 2008-Apr-30 22:44:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 22:44:03 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-30 22:44:03 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-30 22:44:03 LOG5 end_task: Level: (5) ID = <10469> Status = 0 0 0 0 ok 2008-Apr-30 22:44:03 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-30 22:44:03 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-30 22:44:03 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-30 22:44:03 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-30 22:44:03 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-30 22:44:03 LOG5 begin_task: Level: (5) ID = <10470> Status = 0 0 0 0 ok 2008-Apr-30 22:44:03 NOTE WAPPDATA-new_file: New FITS file: wapp.20080430.a2048.0011.fits 2008-Apr-30 22:44:03 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-30 22:44:03 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-30 22:44:03 LOG5 end_task: Level: (5) ID = <10470> Status = 0 0 0 0 ok 2008-Apr-30 22:44:03 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-30 22:44:03 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-30 22:44:03 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-30 22:44:03 LOG5 finish_task: Level: (4) ID = <10467> Status = 0 0 0 0 ok 2008-Apr-30 22:44:03 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-30 22:44:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 22:44:03 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-30 22:44:03 LOG5 end_task: Level: (4) ID = <10467> Status = 0 0 0 0 ok 2008-Apr-30 22:44:03 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-30 22:44:03 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-30 22:44:03 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-30 22:44:03 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-30 22:44:03 LOG5 begin_task: Level: (4) ID = <10471> Status = 0 0 0 0 ok 2008-Apr-30 22:44:03 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080430.a2048.0011.fits} 2008-Apr-30 22:44:03 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-30 22:44:03 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-30 22:44:03 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-30 22:44:03 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-30 22:44:03 LOG5 end_task: Level: (4) ID = <10471> Status = 0 0 0 0 ok 2008-Apr-30 22:44:03 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-30 22:44:03 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-30 22:44:03 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-30 22:44:03 LOG5 begin_task: Level: (4) ID = <10472> Status = 0 0 0 0 ok 2008-Apr-30 22:44:03 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-30 22:44:03 LOG5 log_alfabeam: Parameters: 12.13422222222222 7.1227222222222224 12.910865 2008.333873393414 -20.200006 2008-Apr-30 22:44:03 LOG4 log_alfabeam: ALFABEAM 0 12.134222222222222 7.122722222222225 2008-Apr-30 22:44:03 LOG4 log_alfabeam: ALFABEAM 1 12.134015469404794 7.220515781064159 2008-Apr-30 22:44:03 LOG4 log_alfabeam: ALFABEAM 2 12.128351172505401 7.155831210566880 2008-Apr-30 22:44:03 LOG4 log_alfabeam: ALFABEAM 3 12.128574680714349 7.057721684421680 2008-Apr-30 22:44:03 LOG4 log_alfabeam: ALFABEAM 4 12.134471357774535 7.024740080218317 2008-Apr-30 22:44:03 LOG4 log_alfabeam: ALFABEAM 5 12.140094633828991 7.090189149475825 2008-Apr-30 22:44:03 LOG4 log_alfabeam: ALFABEAM 6 12.139862353749116 7.187856616155310 2008-Apr-30 22:44:03 INFO2 take_spectra: Starting WAPP scan: 812100129 2008-Apr-30 22:44:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-30 22:44:04 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-30 22:44:04 LOG5 begin_task: Level: (5) ID = <10473> Status = 0 0 0 0 ok 2008-Apr-30 22:44:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-30 22:44:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9845.00 2008-Apr-30 22:44:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.154593 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-30 22:44:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.154593 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 22:44:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.154593 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 22:44:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.154593 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-30 22:44:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.154593 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 22:44:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.518 > 1.4)! 2008-Apr-30 22:44:10 LOG4 check_wapp_levels: WAPP-1 power levels: 0.935 1.045 0.922 1.107 2008-Apr-30 22:44:10 LOG4 check_wapp_levels: WAPP-2 power levels: 1.076 0.988 1.052 1.116 2008-Apr-30 22:44:10 LOG4 check_wapp_levels: WAPP-3 power levels: 1.354 1.391 1.479 1.243 2008-Apr-30 22:44:10 LOG4 check_wapp_levels: WAPP-4 power levels: 1.518 1.503 1.324 0.975 2008-Apr-30 22:44:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.154593 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 22:44:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.154593 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 22:44:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.154593 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 22:44:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.154593 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 22:44:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-30 22:44:10 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-30 22:44:10 LOG5 end_task: Level: (5) ID = <10473> Status = 0 0 0 0 ok 2008-Apr-30 22:44:10 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-30 22:44:10 LOG5 end_task: Level: (4) ID = <10472> Status = 0 0 0 0 ok 2008-Apr-30 22:44:10 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-30 22:44:10 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-30 22:44:10 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-30 22:44:10 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-30 22:44:10 LOG5 begin_task: Level: (4) ID = <10474> Status = 0 0 0 0 ok 2008-Apr-30 22:44:10 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-30 22:44:10 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-30 22:44:10 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-30 22:44:10 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-30 22:44:10 LOG5 end_task: Level: (4) ID = <10474> Status = 0 0 0 0 ok 2008-Apr-30 22:44:10 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-30 22:44:10 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-30 22:44:10 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-30 22:44:10 LOG5 begin_task: Level: (4) ID = <10475> Status = 0 0 0 0 ok 2008-Apr-30 22:44:10 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-30 22:44:10 LOG5 log_alfabeam: Parameters: 12.13422222222222 7.1227222222222224 12.912815 2008.3338736152307 -20.200006 2008-Apr-30 22:44:10 LOG4 log_alfabeam: ALFABEAM 0 12.134222222222222 7.122722222222226 2008-Apr-30 22:44:10 LOG4 log_alfabeam: ALFABEAM 1 12.134023439080664 7.220519581159652 2008-Apr-30 22:44:10 LOG4 log_alfabeam: ALFABEAM 2 12.128353881881466 7.155937140404582 2008-Apr-30 22:44:10 LOG4 log_alfabeam: ALFABEAM 3 12.128569376298541 7.057823932901090 2008-Apr-30 22:44:10 LOG4 log_alfabeam: ALFABEAM 4 12.134463319630244 7.024735764114918 2008-Apr-30 22:44:10 LOG4 log_alfabeam: ALFABEAM 5 12.140091967573493 7.090082407105331 2008-Apr-30 22:44:10 LOG4 log_alfabeam: ALFABEAM 6 12.139867681323109 7.187754303240379 2008-Apr-30 22:44:10 INFO2 take_spectra: Starting WAPP scan: 812100130 2008-Apr-30 22:44:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-30 22:44:11 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-30 22:44:11 LOG5 begin_task: Level: (5) ID = <10476> Status = 0 0 0 0 ok 2008-Apr-30 22:44:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-30 22:44:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9852.00 2008-Apr-30 22:44:16 INFO5 check_wapp_levels: WAPP power levels are between 1.242 and 1.518 (still bad) 2008-Apr-30 22:44:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.154593 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-30 22:44:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.154593 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 22:44:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.154593 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 22:44:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.154593 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-30 22:44:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.154593 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 22:44:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.154593 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 22:44:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.154593 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 22:44:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.154593 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 22:44:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.154593 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 22:44:17 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-30 22:44:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-30 22:44:17 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-30 22:44:17 LOG5 end_task: Level: (5) ID = <10476> Status = 0 0 0 0 ok 2008-Apr-30 22:44:17 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-30 22:44:17 LOG5 end_task: Level: (4) ID = <10475> Status = 0 0 0 0 ok 2008-Apr-30 22:44:17 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-30 22:44:17 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-30 22:44:17 LOG5 finish_task: Level: (3) ID = <10466> Status = 0 0 0 0 ok 2008-Apr-30 22:44:17 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-30 22:44:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 22:44:17 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-30 22:44:17 LOG5 end_task: Level: (3) ID = <10466> Status = 0 0 0 0 ok 2008-Apr-30 22:44:17 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-30 22:44:17 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 46.27 and ZA = 15.89 2008-Apr-30 22:44:17 LOG3 track_source: Calling 'track_source AGESVC1A_p2_076 46.27 15.8920922295 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-30 22:44:17 START begin_task: Starting task 'sending tracking commands' 2008-Apr-30 22:44:17 LOG5 begin_task: Level: (3) ID = <10477> Status = 0 0 0 0 ok 2008-Apr-30 22:44:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_076} INFO {Slewing to source 'AGESVC1A_p2_076' ...} 2008-Apr-30 22:44:17 INFO1 track_source: Starting to track AGESVC1A_p2_076 2008-Apr-30 22:44:17 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_076" 2008-Apr-30 22:44:17 LOG3 vw_send: To DATATAKING: set ra 46.27 2008-Apr-30 22:44:17 LOG3 vw_send: To DATATAKING: set dec 15.8920922295 2008-Apr-30 22:44:17 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-30 22:44:17 LOG3 vw_send: To DATATAKING: pnt tr 46.27 15.8920922295 -CF 2008-Apr-30 22:44:17 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-30 22:44:17 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-30 22:44:17 LOG5 finish_task: Level: (3) ID = <10477> Status = 0 0 0 0 ok 2008-Apr-30 22:44:17 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-30 22:44:18 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 22:44:18 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-30 22:44:18 LOG5 end_task: Level: (3) ID = <10477> Status = 0 0 0 0 ok 2008-Apr-30 22:44:18 LOG1 fixed_driftmap: Parameters: HA = +00:46:00.3 Start = 12:55:27.4 LST = 12:54:53.2 diff = 34.3 secs 2008-Apr-30 22:44:18 INFO2 fixed_driftmap: Waiting 32.3 seconds for RA 12:09:27 2008-Apr-30 22:44:18 INFO2 lstwait: Waiting for 32.2 secs from LST 12:54:53 to LST 12:55:25 ... 2008-Apr-30 22:44:18 LOG4 send_obs_status: To obs_status: <1> TASKTIME 32.17001175313959 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-30 22:44:18 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-30 22:44:18 LOG5 begin_task: Level: (3) ID = <10478> Status = 0 0 0 0 ok 2008-Apr-30 22:44:18 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_076" 2008-Apr-30 22:44:18 LOG4 got_cormsg: From DATATAKING: set ra 46.27 2008-Apr-30 22:44:18 LOG4 got_cormsg: From DATATAKING: set dec 15.8920922295 2008-Apr-30 22:44:18 LOG4 got_cormsg: From DATATAKING: vw% 46.27 2008-Apr-30 22:44:18 LOG4 got_cormsg: From DATATAKING: vw% 15.8920922295 2008-Apr-30 22:44:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 22:44:18 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-30 22:44:18 LOG4 got_cormsg: From DATATAKING: pnt tr 46.27 15.8920922295 -CF 2008-Apr-30 22:44:18 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-30 22:44:18 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-30 22:44:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 22:44:22 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.927 and 1.118 2008-Apr-30 22:44:50 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-30 22:44:50 LOG5 end_task: Level: (3) ID = <10478> Status = 0 0 0 0 ok 2008-Apr-30 22:44:50 LOG4 lstwait: Finished waiting, the gui caused difference: -0.1676892399977703 2008-Apr-30 22:44:50 INFO3 lstwait: Finished waiting 2008-Apr-30 22:44:50 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-30 22:44:50 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-30 22:44:50 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-30 22:44:50 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-30 22:44:50 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-30 22:44:50 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-30 22:44:50 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-30 22:44:50 LOG5 begin_task: Level: (3) ID = <10479> Status = 0 0 0 0 ok 2008-Apr-30 22:44:50 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-30 22:44:50 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-30 22:44:50 INFO2 take_spectra: Starting WAPP scan: 812100131 2008-Apr-30 22:44:50 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-30 22:44:50 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-30 22:44:50 LOG5 begin_task: Level: (4) ID = <10480> Status = 0 0 0 0 ok 2008-Apr-30 22:44:50 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-30 22:44:50 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9891.00 2008-Apr-30 22:44:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.154593 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-30 22:44:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.154593 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 22:44:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.154593 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 22:44:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.154593 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-30 22:44:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.154593 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 22:44:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.154593 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 22:44:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.154593 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 22:44:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.154593 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 22:44:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.154593 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 22:45:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.604 < 0.8)! 2008-Apr-30 22:45:57 LOG4 check_wapp_levels: WAPP-1 power levels: 0.957 0.604 0.946 1.123 2008-Apr-30 22:45:57 LOG4 check_wapp_levels: WAPP-2 power levels: 1.073 0.987 1.052 1.115 2008-Apr-30 22:45:57 LOG4 check_wapp_levels: WAPP-3 power levels: 0.994 1.017 1.082 0.938 2008-Apr-30 22:45:57 LOG4 check_wapp_levels: WAPP-4 power levels: 1.110 1.094 0.966 0.974 2008-Apr-30 22:45:59 INFO5 check_wapp_levels: WAPP power levels are between 0.703 and 1.122 (still bad) 2008-Apr-30 22:46:01 INFO5 check_wapp_levels: WAPP power levels are between 0.699 and 1.122 (still bad) 2008-Apr-30 22:46:03 INFO5 check_wapp_levels: WAPP power levels are between 0.699 and 1.122 (still bad) 2008-Apr-30 22:46:05 INFO5 check_wapp_levels: WAPP power levels are between 0.698 and 1.120 (still bad) 2008-Apr-30 22:46:07 INFO5 check_wapp_levels: WAPP power levels are between 0.697 and 1.121 (still bad) 2008-Apr-30 22:46:09 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.816 and 1.123 2008-Apr-30 22:46:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.737 < 0.8)! 2008-Apr-30 22:46:11 LOG4 check_wapp_levels: WAPP-1 power levels: 0.954 0.737 0.939 1.121 2008-Apr-30 22:46:11 LOG4 check_wapp_levels: WAPP-2 power levels: 1.070 0.990 1.052 1.115 2008-Apr-30 22:46:11 LOG4 check_wapp_levels: WAPP-3 power levels: 0.992 1.016 1.084 0.938 2008-Apr-30 22:46:11 LOG4 check_wapp_levels: WAPP-4 power levels: 1.111 1.094 0.966 0.976 2008-Apr-30 22:46:13 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.938 and 1.122 2008-Apr-30 22:46:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.669 < 0.8)! 2008-Apr-30 22:46:17 LOG4 check_wapp_levels: WAPP-1 power levels: 0.950 0.669 0.944 1.124 2008-Apr-30 22:46:17 LOG4 check_wapp_levels: WAPP-2 power levels: 1.074 0.988 1.052 1.115 2008-Apr-30 22:46:17 LOG4 check_wapp_levels: WAPP-3 power levels: 0.993 1.018 1.083 0.939 2008-Apr-30 22:46:17 LOG4 check_wapp_levels: WAPP-4 power levels: 1.112 1.093 0.966 0.973 2008-Apr-30 22:46:19 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.939 and 1.125 2008-Apr-30 22:46:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.633 < 0.8)! 2008-Apr-30 22:46:44 LOG4 check_wapp_levels: WAPP-1 power levels: 0.948 0.633 0.942 1.123 2008-Apr-30 22:46:44 LOG4 check_wapp_levels: WAPP-2 power levels: 1.073 0.990 1.052 1.116 2008-Apr-30 22:46:44 LOG4 check_wapp_levels: WAPP-3 power levels: 0.993 1.016 1.083 0.940 2008-Apr-30 22:46:44 LOG4 check_wapp_levels: WAPP-4 power levels: 1.111 1.092 0.967 0.974 2008-Apr-30 22:46:46 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.940 and 1.166 2008-Apr-30 22:47:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.729 < 0.8)! 2008-Apr-30 22:47:00 LOG4 check_wapp_levels: WAPP-1 power levels: 0.949 0.729 0.941 1.120 2008-Apr-30 22:47:00 LOG4 check_wapp_levels: WAPP-2 power levels: 1.071 0.990 1.054 1.116 2008-Apr-30 22:47:00 LOG4 check_wapp_levels: WAPP-3 power levels: 0.993 1.016 1.084 0.940 2008-Apr-30 22:47:00 LOG4 check_wapp_levels: WAPP-4 power levels: 1.112 1.094 0.968 0.975 2008-Apr-30 22:47:02 INFO5 check_wapp_levels: WAPP power levels are between 0.752 and 1.119 (still bad) 2008-Apr-30 22:47:04 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.941 and 1.120 2008-Apr-30 22:47:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.732 < 0.8)! 2008-Apr-30 22:47:22 LOG4 check_wapp_levels: WAPP-1 power levels: 0.946 0.732 0.940 1.121 2008-Apr-30 22:47:22 LOG4 check_wapp_levels: WAPP-2 power levels: 1.072 0.990 1.054 1.116 2008-Apr-30 22:47:22 LOG4 check_wapp_levels: WAPP-3 power levels: 0.996 1.021 1.104 0.954 2008-Apr-30 22:47:22 LOG4 check_wapp_levels: WAPP-4 power levels: 1.115 1.097 0.971 0.978 2008-Apr-30 22:47:24 INFO5 check_wapp_levels: WAPP power levels are between 0.752 and 1.120 (still bad) 2008-Apr-30 22:47:26 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.901 and 1.120 2008-Apr-30 22:47:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.781 < 0.8)! 2008-Apr-30 22:47:28 LOG4 check_wapp_levels: WAPP-1 power levels: 0.951 0.781 0.940 1.121 2008-Apr-30 22:47:28 LOG4 check_wapp_levels: WAPP-2 power levels: 1.070 0.992 1.054 1.115 2008-Apr-30 22:47:28 LOG4 check_wapp_levels: WAPP-3 power levels: 0.997 1.020 1.105 0.959 2008-Apr-30 22:47:28 LOG4 check_wapp_levels: WAPP-4 power levels: 1.114 1.095 0.969 0.975 2008-Apr-30 22:47:30 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.878 and 1.121 2008-Apr-30 22:48:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.794 < 0.8)! 2008-Apr-30 22:48:09 LOG4 check_wapp_levels: WAPP-1 power levels: 0.950 0.794 0.936 1.122 2008-Apr-30 22:48:09 LOG4 check_wapp_levels: WAPP-2 power levels: 1.095 1.010 1.054 1.115 2008-Apr-30 22:48:09 LOG4 check_wapp_levels: WAPP-3 power levels: 0.993 1.020 1.086 0.940 2008-Apr-30 22:48:09 LOG4 check_wapp_levels: WAPP-4 power levels: 1.111 1.092 0.967 0.973 2008-Apr-30 22:48:11 INFO5 check_wapp_levels: WAPP power levels are between 0.786 and 1.122 (still bad) 2008-Apr-30 22:48:13 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.936 and 1.130 2008-Apr-30 22:48:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.793 < 0.8)! 2008-Apr-30 22:48:25 LOG4 check_wapp_levels: WAPP-1 power levels: 0.950 0.793 0.938 1.123 2008-Apr-30 22:48:25 LOG4 check_wapp_levels: WAPP-2 power levels: 1.071 0.990 1.055 1.117 2008-Apr-30 22:48:25 LOG4 check_wapp_levels: WAPP-3 power levels: 0.991 1.018 1.082 0.940 2008-Apr-30 22:48:25 LOG4 check_wapp_levels: WAPP-4 power levels: 1.112 1.093 0.968 0.972 2008-Apr-30 22:48:27 INFO5 check_wapp_levels: WAPP power levels are between 0.740 and 1.121 (still bad) 2008-Apr-30 22:48:29 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.940 and 1.122 2008-Apr-30 22:50:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.616 < 0.8)! 2008-Apr-30 22:50:00 LOG4 check_wapp_levels: WAPP-1 power levels: 0.944 0.616 0.938 1.117 2008-Apr-30 22:50:00 LOG4 check_wapp_levels: WAPP-2 power levels: 1.073 0.988 1.054 1.116 2008-Apr-30 22:50:00 LOG4 check_wapp_levels: WAPP-3 power levels: 0.989 1.017 1.085 0.939 2008-Apr-30 22:50:00 LOG4 check_wapp_levels: WAPP-4 power levels: 1.121 1.101 0.975 0.981 2008-Apr-30 22:50:02 INFO5 check_wapp_levels: WAPP power levels are between 0.675 and 1.121 (still bad) 2008-Apr-30 22:50:04 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.938 and 1.140 2008-Apr-30 22:50:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.776 < 0.8)! 2008-Apr-30 22:50:36 LOG4 check_wapp_levels: WAPP-1 power levels: 0.951 0.776 0.947 1.129 2008-Apr-30 22:50:36 LOG4 check_wapp_levels: WAPP-2 power levels: 1.072 0.990 1.055 1.118 2008-Apr-30 22:50:36 LOG4 check_wapp_levels: WAPP-3 power levels: 0.987 1.012 1.082 0.937 2008-Apr-30 22:50:36 LOG4 check_wapp_levels: WAPP-4 power levels: 1.115 1.100 0.971 0.979 2008-Apr-30 22:50:38 INFO5 check_wapp_levels: WAPP power levels are between 0.798 and 1.134 (still bad) 2008-Apr-30 22:50:40 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.834 and 1.142 2008-Apr-30 22:50:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.734 < 0.8)! 2008-Apr-30 22:50:50 LOG4 check_wapp_levels: WAPP-1 power levels: 0.948 0.734 0.956 1.144 2008-Apr-30 22:50:50 LOG4 check_wapp_levels: WAPP-2 power levels: 1.076 0.990 1.053 1.115 2008-Apr-30 22:50:50 LOG4 check_wapp_levels: WAPP-3 power levels: 0.987 1.015 1.083 0.936 2008-Apr-30 22:50:50 LOG4 check_wapp_levels: WAPP-4 power levels: 1.113 1.094 0.968 0.975 2008-Apr-30 22:50:52 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.936 and 1.137 2008-Apr-30 22:50:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.710 < 0.8)! 2008-Apr-30 22:50:55 LOG4 check_wapp_levels: WAPP-1 power levels: 0.948 0.710 0.942 1.129 2008-Apr-30 22:50:55 LOG4 check_wapp_levels: WAPP-2 power levels: 1.091 1.008 1.054 1.115 2008-Apr-30 22:50:55 LOG4 check_wapp_levels: WAPP-3 power levels: 0.988 1.013 1.085 0.936 2008-Apr-30 22:50:55 LOG4 check_wapp_levels: WAPP-4 power levels: 1.112 1.094 0.968 0.975 2008-Apr-30 22:50:57 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.937 and 1.124 2008-Apr-30 22:50:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.754 < 0.8)! 2008-Apr-30 22:50:59 LOG4 check_wapp_levels: WAPP-1 power levels: 0.950 0.754 0.939 1.121 2008-Apr-30 22:50:59 LOG4 check_wapp_levels: WAPP-2 power levels: 1.109 1.030 1.053 1.115 2008-Apr-30 22:50:59 LOG4 check_wapp_levels: WAPP-3 power levels: 0.988 1.012 1.085 0.936 2008-Apr-30 22:50:59 LOG4 check_wapp_levels: WAPP-4 power levels: 1.111 1.093 0.967 0.974 2008-Apr-30 22:51:01 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.937 and 1.122 2008-Apr-30 22:51:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.636 < 0.8)! 2008-Apr-30 22:51:03 LOG4 check_wapp_levels: WAPP-1 power levels: 0.950 0.636 0.942 1.123 2008-Apr-30 22:51:03 LOG4 check_wapp_levels: WAPP-2 power levels: 1.119 1.036 1.053 1.115 2008-Apr-30 22:51:03 LOG4 check_wapp_levels: WAPP-3 power levels: 0.988 1.014 1.083 0.937 2008-Apr-30 22:51:03 LOG4 check_wapp_levels: WAPP-4 power levels: 1.112 1.095 0.967 0.976 2008-Apr-30 22:51:05 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.936 and 1.126 2008-Apr-30 22:51:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.720 < 0.8)! 2008-Apr-30 22:51:49 LOG4 check_wapp_levels: WAPP-1 power levels: 0.947 0.720 0.939 1.120 2008-Apr-30 22:51:49 LOG4 check_wapp_levels: WAPP-2 power levels: 1.076 0.991 1.053 1.115 2008-Apr-30 22:51:49 LOG4 check_wapp_levels: WAPP-3 power levels: 0.990 1.015 1.083 0.939 2008-Apr-30 22:51:49 LOG4 check_wapp_levels: WAPP-4 power levels: 1.114 1.097 0.969 0.977 2008-Apr-30 22:51:51 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.938 and 1.121 2008-Apr-30 22:52:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.772 < 0.8)! 2008-Apr-30 22:52:13 LOG4 check_wapp_levels: WAPP-1 power levels: 0.949 0.772 0.936 1.120 2008-Apr-30 22:52:13 LOG4 check_wapp_levels: WAPP-2 power levels: 1.071 0.991 1.053 1.115 2008-Apr-30 22:52:13 LOG4 check_wapp_levels: WAPP-3 power levels: 0.990 1.018 1.082 0.939 2008-Apr-30 22:52:13 LOG4 check_wapp_levels: WAPP-4 power levels: 1.115 1.097 0.970 0.977 2008-Apr-30 22:52:15 INFO5 check_wapp_levels: WAPP power levels are between 0.698 and 1.118 (still bad) 2008-Apr-30 22:52:17 INFO5 check_wapp_levels: WAPP power levels are between 0.707 and 1.118 (still bad) 2008-Apr-30 22:52:19 INFO5 check_wapp_levels: WAPP power levels are between 0.761 and 1.120 (still bad) 2008-Apr-30 22:52:21 INFO5 check_wapp_levels: WAPP power levels are between 0.729 and 1.120 (still bad) 2008-Apr-30 22:52:24 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.937 and 1.121 2008-Apr-30 22:52:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.742 < 0.8)! 2008-Apr-30 22:52:30 LOG4 check_wapp_levels: WAPP-1 power levels: 0.950 0.742 0.937 1.121 2008-Apr-30 22:52:30 LOG4 check_wapp_levels: WAPP-2 power levels: 1.075 0.993 1.053 1.115 2008-Apr-30 22:52:30 LOG4 check_wapp_levels: WAPP-3 power levels: 0.993 1.018 1.082 0.939 2008-Apr-30 22:52:30 LOG4 check_wapp_levels: WAPP-4 power levels: 1.116 1.096 0.968 0.978 2008-Apr-30 22:52:32 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.936 and 1.120 2008-Apr-30 22:52:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.754 < 0.8)! 2008-Apr-30 22:52:46 LOG4 check_wapp_levels: WAPP-1 power levels: 0.946 0.754 0.938 1.119 2008-Apr-30 22:52:46 LOG4 check_wapp_levels: WAPP-2 power levels: 1.084 1.001 1.055 1.116 2008-Apr-30 22:52:46 LOG4 check_wapp_levels: WAPP-3 power levels: 0.993 1.019 1.084 0.941 2008-Apr-30 22:52:46 LOG4 check_wapp_levels: WAPP-4 power levels: 1.117 1.098 0.970 0.979 2008-Apr-30 22:52:48 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.937 and 1.120 2008-Apr-30 22:52:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.742 < 0.8)! 2008-Apr-30 22:52:52 LOG4 check_wapp_levels: WAPP-1 power levels: 0.946 0.742 0.937 1.120 2008-Apr-30 22:52:52 LOG4 check_wapp_levels: WAPP-2 power levels: 1.078 0.997 1.052 1.116 2008-Apr-30 22:52:52 LOG4 check_wapp_levels: WAPP-3 power levels: 0.991 1.019 1.084 0.939 2008-Apr-30 22:52:52 LOG4 check_wapp_levels: WAPP-4 power levels: 1.115 1.096 0.970 0.977 2008-Apr-30 22:52:54 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.939 and 1.121 2008-Apr-30 22:52:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.726 < 0.8)! 2008-Apr-30 22:52:58 LOG4 check_wapp_levels: WAPP-1 power levels: 0.944 0.726 0.938 1.122 2008-Apr-30 22:52:58 LOG4 check_wapp_levels: WAPP-2 power levels: 1.076 0.994 1.055 1.116 2008-Apr-30 22:52:58 LOG4 check_wapp_levels: WAPP-3 power levels: 0.994 1.020 1.083 0.938 2008-Apr-30 22:52:58 LOG4 check_wapp_levels: WAPP-4 power levels: 1.115 1.096 0.970 0.978 2008-Apr-30 22:53:00 INFO5 check_wapp_levels: WAPP power levels are between 0.796 and 1.122 (still bad) 2008-Apr-30 22:53:02 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.829 and 1.122 2008-Apr-30 22:53:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.668 < 0.8)! 2008-Apr-30 22:53:28 LOG4 check_wapp_levels: WAPP-1 power levels: 0.945 0.668 0.940 1.122 2008-Apr-30 22:53:28 LOG4 check_wapp_levels: WAPP-2 power levels: 1.076 0.991 1.055 1.116 2008-Apr-30 22:53:28 LOG4 check_wapp_levels: WAPP-3 power levels: 0.993 1.018 1.082 0.940 2008-Apr-30 22:53:28 LOG4 check_wapp_levels: WAPP-4 power levels: 1.117 1.099 0.973 0.980 2008-Apr-30 22:53:30 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.939 and 1.123 2008-Apr-30 22:53:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.763 < 0.8)! 2008-Apr-30 22:53:38 LOG4 check_wapp_levels: WAPP-1 power levels: 0.946 0.763 0.939 1.122 2008-Apr-30 22:53:38 LOG4 check_wapp_levels: WAPP-2 power levels: 1.075 0.991 1.055 1.117 2008-Apr-30 22:53:38 LOG4 check_wapp_levels: WAPP-3 power levels: 0.994 1.019 1.085 0.939 2008-Apr-30 22:53:38 LOG4 check_wapp_levels: WAPP-4 power levels: 1.113 1.097 0.970 0.979 2008-Apr-30 22:53:40 INFO5 check_wapp_levels: WAPP power levels are between 0.724 and 1.123 (still bad) 2008-Apr-30 22:53:42 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.939 and 1.125 2008-Apr-30 22:53:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.717 < 0.8)! 2008-Apr-30 22:53:53 LOG4 check_wapp_levels: WAPP-1 power levels: 0.947 0.717 0.935 1.126 2008-Apr-30 22:53:53 LOG4 check_wapp_levels: WAPP-2 power levels: 1.073 0.990 1.055 1.116 2008-Apr-30 22:53:53 LOG4 check_wapp_levels: WAPP-3 power levels: 0.990 1.018 1.082 0.939 2008-Apr-30 22:53:53 LOG4 check_wapp_levels: WAPP-4 power levels: 1.113 1.096 0.968 0.977 2008-Apr-30 22:53:55 INFO5 check_wapp_levels: WAPP power levels are between 0.596 and 1.126 (still bad) 2008-Apr-30 22:53:57 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.939 and 1.124 2008-Apr-30 22:57:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.787 < 0.8)! 2008-Apr-30 22:57:01 LOG4 check_wapp_levels: WAPP-1 power levels: 0.939 0.787 0.922 1.109 2008-Apr-30 22:57:01 LOG4 check_wapp_levels: WAPP-2 power levels: 1.073 0.991 1.055 1.116 2008-Apr-30 22:57:01 LOG4 check_wapp_levels: WAPP-3 power levels: 0.990 1.016 1.082 0.937 2008-Apr-30 22:57:01 LOG4 check_wapp_levels: WAPP-4 power levels: 1.113 1.095 0.969 0.976 2008-Apr-30 22:57:03 INFO5 check_wapp_levels: WAPP power levels are between 0.779 and 1.116 (still bad) 2008-Apr-30 22:57:05 INFO5 check_wapp_levels: WAPP power levels are between 0.778 and 1.116 (still bad) 2008-Apr-30 22:57:07 INFO5 check_wapp_levels: WAPP power levels are between 0.776 and 1.116 (still bad) 2008-Apr-30 22:57:09 INFO5 check_wapp_levels: WAPP power levels are between 0.774 and 1.115 (still bad) 2008-Apr-30 22:57:11 INFO5 check_wapp_levels: WAPP power levels are between 0.772 and 1.116 (still bad) 2008-Apr-30 22:57:13 INFO5 check_wapp_levels: WAPP power levels are between 0.767 and 1.116 (still bad) 2008-Apr-30 22:57:15 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.863 and 1.116 2008-Apr-30 22:58:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.791 < 0.8)! 2008-Apr-30 22:58:44 LOG4 check_wapp_levels: WAPP-1 power levels: 0.973 0.791 0.949 1.126 2008-Apr-30 22:58:44 LOG4 check_wapp_levels: WAPP-2 power levels: 1.075 0.994 1.056 1.117 2008-Apr-30 22:58:44 LOG4 check_wapp_levels: WAPP-3 power levels: 0.998 1.015 1.094 0.938 2008-Apr-30 22:58:44 LOG4 check_wapp_levels: WAPP-4 power levels: 1.113 1.096 0.969 0.978 2008-Apr-30 22:58:46 INFO5 check_wapp_levels: WAPP power levels are between 0.749 and 1.128 (still bad) 2008-Apr-30 22:58:48 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.937 and 1.127 2008-Apr-30 22:59:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.785 < 0.8)! 2008-Apr-30 22:59:39 LOG4 check_wapp_levels: WAPP-1 power levels: 0.974 0.785 0.951 1.131 2008-Apr-30 22:59:39 LOG4 check_wapp_levels: WAPP-2 power levels: 1.076 0.993 1.065 1.124 2008-Apr-30 22:59:39 LOG4 check_wapp_levels: WAPP-3 power levels: 0.998 1.014 1.088 0.939 2008-Apr-30 22:59:39 LOG4 check_wapp_levels: WAPP-4 power levels: 1.111 1.097 0.969 0.977 2008-Apr-30 22:59:41 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.938 and 1.130 2008-Apr-30 22:59:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.651 < 0.8)! 2008-Apr-30 22:59:53 LOG4 check_wapp_levels: WAPP-1 power levels: 0.967 0.651 0.947 1.129 2008-Apr-30 22:59:53 LOG4 check_wapp_levels: WAPP-2 power levels: 1.076 0.993 1.057 1.119 2008-Apr-30 22:59:53 LOG4 check_wapp_levels: WAPP-3 power levels: 0.992 1.014 1.084 0.939 2008-Apr-30 22:59:53 LOG4 check_wapp_levels: WAPP-4 power levels: 1.110 1.098 0.969 0.979 2008-Apr-30 22:59:55 INFO5 check_wapp_levels: WAPP power levels are between 0.700 and 1.129 (still bad) 2008-Apr-30 22:59:57 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.938 and 1.129 2008-Apr-30 23:00:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.780 < 0.8)! 2008-Apr-30 23:00:23 LOG4 check_wapp_levels: WAPP-1 power levels: 0.966 0.780 0.947 1.129 2008-Apr-30 23:00:23 LOG4 check_wapp_levels: WAPP-2 power levels: 1.075 0.992 1.056 1.116 2008-Apr-30 23:00:23 LOG4 check_wapp_levels: WAPP-3 power levels: 0.990 1.011 1.088 0.939 2008-Apr-30 23:00:23 LOG4 check_wapp_levels: WAPP-4 power levels: 1.109 1.098 0.968 0.977 2008-Apr-30 23:00:25 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.938 and 1.129 2008-Apr-30 23:01:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.652 < 0.8)! 2008-Apr-30 23:01:26 LOG4 check_wapp_levels: WAPP-1 power levels: 0.986 0.652 0.948 1.133 2008-Apr-30 23:01:26 LOG4 check_wapp_levels: WAPP-2 power levels: 1.078 0.993 1.056 1.117 2008-Apr-30 23:01:26 LOG4 check_wapp_levels: WAPP-3 power levels: 0.990 1.015 1.084 0.940 2008-Apr-30 23:01:26 LOG4 check_wapp_levels: WAPP-4 power levels: 1.116 1.102 0.973 0.982 2008-Apr-30 23:01:28 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.803 and 1.132 2008-Apr-30 23:01:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.689 < 0.8)! 2008-Apr-30 23:01:38 LOG4 check_wapp_levels: WAPP-1 power levels: 0.958 0.689 0.947 1.134 2008-Apr-30 23:01:38 LOG4 check_wapp_levels: WAPP-2 power levels: 1.080 0.998 1.059 1.121 2008-Apr-30 23:01:38 LOG4 check_wapp_levels: WAPP-3 power levels: 0.990 1.015 1.085 0.941 2008-Apr-30 23:01:38 LOG4 check_wapp_levels: WAPP-4 power levels: 1.113 1.097 0.970 0.977 2008-Apr-30 23:01:40 INFO5 check_wapp_levels: WAPP power levels are between 0.771 and 1.134 (still bad) 2008-Apr-30 23:01:42 INFO5 check_wapp_levels: WAPP power levels are between 0.706 and 1.133 (still bad) 2008-Apr-30 23:01:44 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.853 and 1.130 2008-Apr-30 23:02:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.767 < 0.8)! 2008-Apr-30 23:02:12 LOG4 check_wapp_levels: WAPP-1 power levels: 0.954 0.767 0.940 1.126 2008-Apr-30 23:02:12 LOG4 check_wapp_levels: WAPP-2 power levels: 1.078 0.995 1.058 1.118 2008-Apr-30 23:02:12 LOG4 check_wapp_levels: WAPP-3 power levels: 0.992 1.018 1.087 0.941 2008-Apr-30 23:02:12 LOG4 check_wapp_levels: WAPP-4 power levels: 1.115 1.096 0.970 0.977 2008-Apr-30 23:02:14 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.829 and 1.126 2008-Apr-30 23:02:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.778 < 0.8)! 2008-Apr-30 23:02:17 LOG4 check_wapp_levels: WAPP-1 power levels: 0.958 0.778 0.941 1.126 2008-Apr-30 23:02:17 LOG4 check_wapp_levels: WAPP-2 power levels: 1.075 0.993 1.057 1.118 2008-Apr-30 23:02:17 LOG4 check_wapp_levels: WAPP-3 power levels: 0.992 1.019 1.086 0.941 2008-Apr-30 23:02:17 LOG4 check_wapp_levels: WAPP-4 power levels: 1.115 1.096 0.970 0.978 2008-Apr-30 23:02:19 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.939 and 1.126 2008-Apr-30 23:02:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.762 < 0.8)! 2008-Apr-30 23:02:31 LOG4 check_wapp_levels: WAPP-1 power levels: 0.960 0.762 0.941 1.125 2008-Apr-30 23:02:31 LOG4 check_wapp_levels: WAPP-2 power levels: 1.076 0.995 1.056 1.119 2008-Apr-30 23:02:31 LOG4 check_wapp_levels: WAPP-3 power levels: 0.992 1.014 1.087 0.939 2008-Apr-30 23:02:31 LOG4 check_wapp_levels: WAPP-4 power levels: 1.115 1.098 0.972 0.977 2008-Apr-30 23:02:33 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.940 and 1.126 2008-Apr-30 23:02:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.714 < 0.8)! 2008-Apr-30 23:02:57 LOG4 check_wapp_levels: WAPP-1 power levels: 0.953 0.714 0.938 1.125 2008-Apr-30 23:02:57 LOG4 check_wapp_levels: WAPP-2 power levels: 1.076 0.994 1.057 1.118 2008-Apr-30 23:02:57 LOG4 check_wapp_levels: WAPP-3 power levels: 0.990 1.016 1.088 0.942 2008-Apr-30 23:02:57 LOG4 check_wapp_levels: WAPP-4 power levels: 1.115 1.096 0.971 0.976 2008-Apr-30 23:02:59 INFO5 check_wapp_levels: WAPP power levels are between 0.628 and 1.124 (still bad) 2008-Apr-30 23:03:01 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.940 and 1.129 2008-Apr-30 23:04:51 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-30 23:04:51 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-30 23:04:51 LOG5 end_task: Level: (4) ID = <10480> Status = 0 0 0 0 ok 2008-Apr-30 23:04:51 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-30 23:04:51 LOG5 end_task: Level: (3) ID = <10479> Status = 0 0 0 0 ok 2008-Apr-30 23:04:51 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-30 23:04:51 LOG5 finish_task: Level: (2) ID = <10446> Status = 0 0 0 0 ok 2008-Apr-30 23:04:51 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-30 23:04:51 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-30 23:04:51 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-30 23:04:51 LOG5 end_task: Level: (2) ID = <10446> Status = 0 0 0 0 ok 2008-Apr-30 23:04:51 COMMAND run_command_line: EXECUTING command 51: 'FIXEDDRIFT az=47.36 alfaangle=-21.2 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p1_069 ra=122900.00 dec=71800.00' 2008-Apr-30 23:04:51 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-30 23:04:52 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-30 23:04:52 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 47.36 -21.2 hcorcal 5 tracking no first 1 AGESVC1B_p1_069 122900.00 71800.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-30 23:04:52 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-30 23:04:52 LOG5 begin_task: Level: (2) ID = <10481> Status = 0 0 0 0 ok 2008-Apr-30 23:04:52 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGESVC1A_p2_076' 2008-Apr-30 23:04:52 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-30 23:04:52 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1B_p1_069} 2008-Apr-30 23:04:52 INFO3 fixed_driftmap: Sending telescope to Az = 47.36 and ZA = 15.94 2008-Apr-30 23:04:52 LOG3 track_source: Calling 'track_source AGESVC1B_p1_069 47.36 15.9386327287 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-30 23:04:52 START begin_task: Starting task 'sending tracking commands' 2008-Apr-30 23:04:52 LOG5 begin_task: Level: (3) ID = <10482> Status = 0 0 0 0 ok 2008-Apr-30 23:04:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p1_069} INFO {Slewing to source 'AGESVC1B_p1_069' ...} 2008-Apr-30 23:04:52 INFO1 track_source: Starting to track AGESVC1B_p1_069 2008-Apr-30 23:04:52 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p1_069" 2008-Apr-30 23:04:52 LOG3 vw_send: To DATATAKING: set ra 47.36 2008-Apr-30 23:04:52 LOG3 vw_send: To DATATAKING: set dec 15.9386327287 2008-Apr-30 23:04:52 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-30 23:04:52 LOG3 vw_send: To DATATAKING: pnt tr 47.36 15.9386327287 -CF 2008-Apr-30 23:04:52 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-30 23:04:52 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-30 23:04:52 LOG5 finish_task: Level: (3) ID = <10482> Status = 0 0 0 0 ok 2008-Apr-30 23:04:52 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-30 23:04:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 23:04:52 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-30 23:04:52 LOG5 end_task: Level: (3) ID = <10482> Status = 0 0 0 0 ok 2008-Apr-30 23:04:52 START begin_task: Starting task 'rotate ALFA to -21.2 degrees' 2008-Apr-30 23:04:52 LOG5 begin_task: Level: (3) ID = <10483> Status = 0 0 0 0 ok 2008-Apr-30 23:04:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -21.2 degrees ...} 2008-Apr-30 23:04:52 INFO2 rotate_alfa: ALFA commanded to -21.2 degrees 2008-Apr-30 23:04:52 LOG3 sock_errsend: To ALFAMOTOR: POSITION -21.2 REPLY 2008-Apr-30 23:04:52 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-30 23:04:52 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-30 23:04:52 LOG5 begin_task: Level: (4) ID = <10484> Status = 0 0 0 0 ok 2008-Apr-30 23:04:52 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p1_069" 2008-Apr-30 23:04:52 LOG4 got_cormsg: From DATATAKING: set ra 47.36 2008-Apr-30 23:04:52 LOG4 got_cormsg: From DATATAKING: set dec 15.9386327287 2008-Apr-30 23:04:52 LOG4 got_cormsg: From DATATAKING: vw% 47.36 2008-Apr-30 23:04:52 LOG4 got_cormsg: From DATATAKING: vw% 15.9386327287 2008-Apr-30 23:04:52 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:04:52 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-30 23:04:52 LOG4 got_cormsg: From DATATAKING: pnt tr 47.36 15.9386327287 -CF 2008-Apr-30 23:04:52 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-30 23:04:52 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-30 23:04:52 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:04:54 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-30 23:04:54 INFO3 alfa_motor: ALFA rotator in-position -21.20 degrees 2008-Apr-30 23:04:54 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-30 23:04:54 LOG5 end_task: Level: (4) ID = <10484> Status = 0 0 0 0 ok 2008-Apr-30 23:04:54 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-30 23:04:54 STOP finish_task: Finishing task 'rotate ALFA to -21.2 degrees' 2008-Apr-30 23:04:54 LOG5 finish_task: Level: (3) ID = <10483> Status = 0 0 0 0 ok 2008-Apr-30 23:04:54 INFO2 finish_task: DONE finished configuration: rotating ALFA to -21.2 degrees 2008-Apr-30 23:04:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 23:04:54 STOP end_task: Finishing task 'rotate ALFA to -21.2 degrees' with status 'OK' 2008-Apr-30 23:04:54 LOG5 end_task: Level: (3) ID = <10483> Status = 0 0 0 0 ok 2008-Apr-30 23:04:55 START begin_task: Starting task 'waiting on telescope' 2008-Apr-30 23:04:55 LOG5 begin_task: Level: (3) ID = <10485> Status = 0 0 0 0 ok 2008-Apr-30 23:04:55 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-30 23:04:55 LOG3 waittrk: Start waittrk 5 2008-Apr-30 23:04:55 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-30 23:04:55 LOG5 begin_task: Level: (4) ID = <10486> Status = 0 0 0 0 ok 2008-Apr-30 23:05:00 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-30 23:05:00 LOG5 end_task: Level: (4) ID = <10486> Status = 0 0 0 0 ok 2008-Apr-30 23:05:00 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-30 23:05:00 LOG5 begin_task: Level: (4) ID = <10487> Status = 0 0 0 0 ok 2008-Apr-30 23:05:11 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-30 23:05:11 LOG5 end_task: Level: (4) ID = <10487> Status = 0 0 0 0 ok 2008-Apr-30 23:05:11 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-30 23:05:11 INFO2 waittrk: Now tracking AGESVC1B_p1_069 2008-Apr-30 23:05:11 LOG4 waittrk: Current telescope position: Az = 407.13 ZA = 15.93 2008-Apr-30 23:05:11 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-30 23:05:11 LOG5 finish_task: Level: (3) ID = <10485> Status = 0 0 0 0 ok 2008-Apr-30 23:05:11 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-30 23:05:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 23:05:11 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-30 23:05:11 LOG5 end_task: Level: (3) ID = <10485> Status = 0 0 0 0 ok 2008-Apr-30 23:05:11 START begin_task: Starting task 'selecting calibration type' 2008-Apr-30 23:05:11 LOG5 begin_task: Level: (3) ID = <10488> Status = 0 0 0 0 ok 2008-Apr-30 23:05:11 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-30 23:05:11 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-30 23:05:11 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 23:05:11 START begin_task: Starting task 'waiting on setcal' 2008-Apr-30 23:05:11 LOG5 begin_task: Level: (4) ID = <10489> Status = 0 0 0 0 ok 2008-Apr-30 23:05:11 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-30 23:05:11 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 23:05:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:05:12 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-30 23:05:12 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-30 23:05:12 LOG5 end_task: Level: (4) ID = <10489> Status = 0 0 0 0 ok 2008-Apr-30 23:05:12 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-30 23:05:12 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-30 23:05:12 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-30 23:05:12 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-30 23:05:12 LOG5 begin_task: Level: (4) ID = <10490> Status = 0 0 0 0 ok 2008-Apr-30 23:05:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:05:12 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-30 23:05:12 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-30 23:05:12 LOG5 end_task: Level: (4) ID = <10490> Status = 0 0 0 0 ok 2008-Apr-30 23:05:12 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-30 23:05:12 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-30 23:05:12 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-30 23:05:12 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-30 23:05:12 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-30 23:05:12 LOG5 begin_task: Level: (4) ID = <10491> Status = 0 0 0 0 ok 2008-Apr-30 23:05:12 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-30 23:05:12 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-30 23:05:12 LOG5 end_task: Level: (4) ID = <10491> Status = 0 0 0 0 ok 2008-Apr-30 23:05:12 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-30 23:05:12 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-30 23:05:12 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-30 23:05:12 LOG5 finish_task: Level: (3) ID = <10488> Status = 0 0 0 0 ok 2008-Apr-30 23:05:12 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-30 23:05:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 23:05:12 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-30 23:05:12 LOG5 end_task: Level: (3) ID = <10488> Status = 0 0 0 0 ok 2008-Apr-30 23:05:12 LOG5 dopset_later: Calling 'dopset_later 35.329207309050283' 2008-Apr-30 23:05:12 INFO3 dopset_later: Setting Doppler correction for 23:05:47 (35.3 seconds from now) 2008-Apr-30 23:05:12 LOG5 antvel: Calling 'antvel 47.360000 15.938633 F 35.329207309050283' 2008-Apr-30 23:05:12 LOG2 antvel: Parameters to Doppler: Heliocentric 97547 2008 121 0.0 2008-Apr-30 23:05:12 INFO5 antvel: Computed antenna velocity: +17.38479 km/s 2008-Apr-30 23:05:12 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=17.384789760699999 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-30 23:05:12 INFO4 dopset_gen: New sky frequencies: 1381.163336 1381.163336 1381.163336 1381.163336 1381.163336 1381.163336 1381.163336 1381.163336 1381.163336 2008-Apr-30 23:05:12 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.163336 sky0=1381.163336 sky1=1381.163336 sky2=1381.163336 sky3=1381.163336 sky4=1381.163336 sky5=1381.163336 sky6=1381.163336 sky7=1381.163336 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-30 23:05:12 LOG2 dopset_gen: Result from 'sky2syn': 1631.163336 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-30 23:05:12 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631163336.0} 2008-Apr-30 23:05:12 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 23:05:12 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-30 23:05:12 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-30 23:05:12 INFO5 fixed_driftmap: Tracking J2000 position: RA = 12:28:29.2 Dec = +07:17:51.1 2008-Apr-30 23:05:12 LOG3 track_source: Calling 'track_source AGESVC1B_p1_069 122829.2 071751.1 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-30 23:05:12 START begin_task: Starting task 'sending tracking commands' 2008-Apr-30 23:05:12 LOG5 begin_task: Level: (3) ID = <10492> Status = 0 0 0 0 ok 2008-Apr-30 23:05:12 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p1_069} INFO {Slewing to source 'AGESVC1B_p1_069' ...} 2008-Apr-30 23:05:12 INFO1 track_source: Starting to track AGESVC1B_p1_069 2008-Apr-30 23:05:12 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p1_069" 2008-Apr-30 23:05:12 LOG3 vw_send: To DATATAKING: set ra 122829.2 2008-Apr-30 23:05:12 LOG3 vw_send: To DATATAKING: set dec 071751.1 2008-Apr-30 23:05:12 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-30 23:05:12 LOG3 vw_send: To DATATAKING: pnt tr 122829.2 071751.1 -CJ 2008-Apr-30 23:05:12 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-30 23:05:12 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-30 23:05:12 LOG5 finish_task: Level: (3) ID = <10492> Status = 0 0 0 0 ok 2008-Apr-30 23:05:12 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-30 23:05:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 23:05:13 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-30 23:05:13 LOG5 end_task: Level: (3) ID = <10492> Status = 0 0 0 0 ok 2008-Apr-30 23:05:13 START begin_task: Starting task 'waiting on telescope' 2008-Apr-30 23:05:13 LOG5 begin_task: Level: (3) ID = <10493> Status = 0 0 0 0 ok 2008-Apr-30 23:05:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-30 23:05:13 LOG3 waittrk: Start waittrk 5 2008-Apr-30 23:05:13 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-30 23:05:13 LOG5 begin_task: Level: (4) ID = <10494> Status = 0 0 0 0 ok 2008-Apr-30 23:05:13 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631163336.0} 2008-Apr-30 23:05:13 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 23:05:13 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p1_069" 2008-Apr-30 23:05:13 LOG4 got_cormsg: From DATATAKING: set ra 122829.2 2008-Apr-30 23:05:13 LOG4 got_cormsg: From DATATAKING: set dec 071751.1 2008-Apr-30 23:05:13 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-30 23:05:13 LOG4 got_cormsg: From DATATAKING: vw% 122829.2 2008-Apr-30 23:05:13 LOG4 got_cormsg: From DATATAKING: vw% 071751.1 2008-Apr-30 23:05:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:05:13 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-30 23:05:13 LOG4 got_cormsg: From DATATAKING: pnt tr 122829.2 071751.1 -CJ 2008-Apr-30 23:05:13 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-30 23:05:13 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-30 23:05:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:05:18 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-30 23:05:18 LOG5 end_task: Level: (4) ID = <10494> Status = 0 0 0 0 ok 2008-Apr-30 23:05:18 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-30 23:05:18 LOG5 begin_task: Level: (4) ID = <10495> Status = 0 0 0 0 ok 2008-Apr-30 23:05:21 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-30 23:05:21 LOG5 end_task: Level: (4) ID = <10495> Status = 0 0 0 0 ok 2008-Apr-30 23:05:21 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-30 23:05:21 INFO2 waittrk: Now tracking AGESVC1B_p1_069 2008-Apr-30 23:05:21 LOG4 waittrk: Current telescope position: Az = 407.17 ZA = 15.94 2008-Apr-30 23:05:21 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-30 23:05:21 LOG5 finish_task: Level: (3) ID = <10493> Status = 0 0 0 0 ok 2008-Apr-30 23:05:21 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-30 23:05:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 23:05:21 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-30 23:05:21 LOG5 end_task: Level: (3) ID = <10493> Status = 0 0 0 0 ok 2008-Apr-30 23:05:21 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-30 23:05:21 LOG5 begin_task: Level: (3) ID = <10496> Status = 0 0 0 0 ok 2008-Apr-30 23:05:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-30 23:05:21 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-30 23:05:21 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-30 23:05:21 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-30 23:05:21 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 23:05:21 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-30 23:05:21 LOG5 begin_task: Level: (4) ID = <10497> Status = 0 0 0 0 ok 2008-Apr-30 23:05:21 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-30 23:05:21 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 23:05:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:05:24 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-30 23:05:24 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-30 23:05:24 LOG5 end_task: Level: (4) ID = <10497> Status = 0 0 0 0 ok 2008-Apr-30 23:05:24 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-30 23:05:24 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-30 23:05:24 LOG5 begin_task: Level: (4) ID = <10498> Status = 0 0 0 0 ok 2008-Apr-30 23:05:24 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-30 23:05:24 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-30 23:05:24 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-30 23:05:24 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-30 23:05:24 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-30 23:05:24 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-30 23:05:24 LOG5 begin_task: Level: (5) ID = <10499> Status = 0 0 0 0 ok 2008-Apr-30 23:05:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:05:24 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-30 23:05:24 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 1 dB --- beam 1: 8 6 dB 2008-Apr-30 23:05:24 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 6 dB 2008-Apr-30 23:05:24 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-30 23:05:24 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 3 3 dB 2008-Apr-30 23:05:25 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-30 23:05:25 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-30 23:05:25 LOG5 end_task: Level: (5) ID = <10499> Status = 0 0 0 0 ok 2008-Apr-30 23:05:25 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.955 0.905 ALFA beam 1: 0.935 1.122 2008-Apr-30 23:05:25 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.084 1.001 ALFA beam 3: 1.064 1.123 2008-Apr-30 23:05:25 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.992 1.020 ALFA beam 5: 1.091 0.940 2008-Apr-30 23:05:25 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.114 1.101 ALFA beam 7: 0.972 0.979 2008-Apr-30 23:05:25 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-30 23:05:25 LOG5 finish_task: Level: (4) ID = <10498> Status = 0 0 0 0 ok 2008-Apr-30 23:05:25 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-30 23:05:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 23:05:25 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-30 23:05:25 LOG5 end_task: Level: (4) ID = <10498> Status = 0 0 0 0 ok 2008-Apr-30 23:05:25 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-30 23:05:25 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-30 23:05:25 LOG5 finish_task: Level: (3) ID = <10496> Status = 0 0 0 0 ok 2008-Apr-30 23:05:25 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-30 23:05:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 23:05:25 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-30 23:05:25 LOG5 end_task: Level: (3) ID = <10496> Status = 0 0 0 0 ok 2008-Apr-30 23:05:25 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 SS 2008-Apr-30 23:05:25 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 SS 2008-Apr-30 23:05:25 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 SS 2008-Apr-30 23:05:25 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 SS 2008-Apr-30 23:05:25 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-30 23:05:25 START begin_task: Starting task 'WAPP calibration' 2008-Apr-30 23:05:25 LOG5 begin_task: Level: (3) ID = <10500> Status = 0 0 0 0 ok 2008-Apr-30 23:05:25 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-30 23:05:25 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-30 23:05:25 START begin_task: Starting task 'selecting calibration type' 2008-Apr-30 23:05:25 LOG5 begin_task: Level: (4) ID = <10501> Status = 0 0 0 0 ok 2008-Apr-30 23:05:25 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-30 23:05:25 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-30 23:05:25 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 23:05:25 START begin_task: Starting task 'waiting on setcal' 2008-Apr-30 23:05:25 LOG5 begin_task: Level: (5) ID = <10502> Status = 0 0 0 0 ok 2008-Apr-30 23:05:25 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 SS' 2008-Apr-30 23:05:25 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-30 23:05:25 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 23:05:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:05:25 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-30 23:05:25 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-30 23:05:25 LOG5 end_task: Level: (5) ID = <10502> Status = 0 0 0 0 ok 2008-Apr-30 23:05:25 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-30 23:05:25 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-30 23:05:25 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-30 23:05:25 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-30 23:05:25 LOG5 begin_task: Level: (5) ID = <10503> Status = 0 0 0 0 ok 2008-Apr-30 23:05:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:05:25 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-30 23:05:25 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-30 23:05:25 LOG5 end_task: Level: (5) ID = <10503> Status = 0 0 0 0 ok 2008-Apr-30 23:05:25 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-30 23:05:25 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-30 23:05:25 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-30 23:05:25 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-30 23:05:25 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-30 23:05:25 LOG5 begin_task: Level: (5) ID = <10504> Status = 0 0 0 0 ok 2008-Apr-30 23:05:25 NOTE WAPPDATA-new_file: New FITS file: wapp.20080430.a2048.0012.fits 2008-Apr-30 23:05:25 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-30 23:05:25 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-30 23:05:25 LOG5 end_task: Level: (5) ID = <10504> Status = 0 0 0 0 ok 2008-Apr-30 23:05:25 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-30 23:05:25 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-30 23:05:25 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-30 23:05:25 LOG5 finish_task: Level: (4) ID = <10501> Status = 0 0 0 0 ok 2008-Apr-30 23:05:25 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-30 23:05:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 23:05:26 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-30 23:05:26 LOG5 end_task: Level: (4) ID = <10501> Status = 0 0 0 0 ok 2008-Apr-30 23:05:26 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-30 23:05:26 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-30 23:05:26 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-30 23:05:26 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-30 23:05:26 LOG5 begin_task: Level: (4) ID = <10505> Status = 0 0 0 0 ok 2008-Apr-30 23:05:26 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080430.a2048.0012.fits} 2008-Apr-30 23:05:26 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-30 23:05:26 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-30 23:05:26 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-30 23:05:26 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-30 23:05:26 LOG5 end_task: Level: (4) ID = <10505> Status = 0 0 0 0 ok 2008-Apr-30 23:05:26 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-30 23:05:26 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-30 23:05:26 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-30 23:05:26 LOG5 begin_task: Level: (4) ID = <10506> Status = 0 0 0 0 ok 2008-Apr-30 23:05:26 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-30 23:05:26 LOG5 log_alfabeam: Parameters: 12.474777777777778 7.2975277777777796 13.267951 2008.3339140175426 -21.200048 2008-Apr-30 23:05:26 LOG4 log_alfabeam: ALFABEAM 0 12.474777777777781 7.297527777777783 2008-Apr-30 23:05:26 LOG4 log_alfabeam: ALFABEAM 1 12.474571461869774 7.395056337443090 2008-Apr-30 23:05:26 LOG4 log_alfabeam: ALFABEAM 2 12.468888784548140 7.330554989180370 2008-Apr-30 23:05:26 LOG4 log_alfabeam: ALFABEAM 3 12.469112484304951 7.232700563846705 2008-Apr-30 23:05:26 LOG4 log_alfabeam: ALFABEAM 4 12.475026345462226 7.199809116137642 2008-Apr-30 23:05:26 LOG4 log_alfabeam: ALFABEAM 5 12.480667790441641 7.265080276107595 2008-Apr-30 23:05:26 LOG4 log_alfabeam: ALFABEAM 6 12.480436708690970 7.362474382832126 2008-Apr-30 23:05:26 INFO2 take_spectra: Starting WAPP scan: 812100132 2008-Apr-30 23:05:26 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-30 23:05:26 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-30 23:05:26 LOG5 begin_task: Level: (5) ID = <10507> Status = 0 0 0 0 ok 2008-Apr-30 23:05:26 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-30 23:05:26 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11127.00 2008-Apr-30 23:05:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.163336 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-30 23:05:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.163336 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 23:05:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.163336 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 23:05:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.163336 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-30 23:05:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.163336 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 23:05:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.163336 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 23:05:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.163336 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 23:05:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.163336 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 23:05:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.163336 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 23:05:32 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-30 23:05:32 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-30 23:05:32 LOG5 end_task: Level: (5) ID = <10507> Status = 0 0 0 0 ok 2008-Apr-30 23:05:32 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-30 23:05:32 LOG5 end_task: Level: (4) ID = <10506> Status = 0 0 0 0 ok 2008-Apr-30 23:05:32 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-30 23:05:32 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-30 23:05:32 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-30 23:05:32 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-30 23:05:32 LOG5 begin_task: Level: (4) ID = <10508> Status = 0 0 0 0 ok 2008-Apr-30 23:05:32 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-30 23:05:32 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-30 23:05:32 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-30 23:05:32 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-30 23:05:32 LOG5 end_task: Level: (4) ID = <10508> Status = 0 0 0 0 ok 2008-Apr-30 23:05:32 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-30 23:05:32 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-30 23:05:32 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-30 23:05:32 LOG5 begin_task: Level: (4) ID = <10509> Status = 0 0 0 0 ok 2008-Apr-30 23:05:32 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-30 23:05:32 LOG5 log_alfabeam: Parameters: 12.474777777777778 7.2975277777777796 13.269901 2008.3339142393593 -21.200048 2008-Apr-30 23:05:32 LOG4 log_alfabeam: ALFABEAM 0 12.474777777777781 7.297527777777780 2008-Apr-30 23:05:32 LOG4 log_alfabeam: ALFABEAM 1 12.474579229709061 7.395060048950645 2008-Apr-30 23:05:32 LOG4 log_alfabeam: ALFABEAM 2 12.468891426347207 7.330658750446898 2008-Apr-30 23:05:32 LOG4 log_alfabeam: ALFABEAM 3 12.469107312813422 7.232800748099116 2008-Apr-30 23:05:32 LOG4 log_alfabeam: ALFABEAM 4 12.475018508687226 7.199804914663942 2008-Apr-30 23:05:32 LOG4 log_alfabeam: ALFABEAM 5 12.480665191382915 7.264975691203828 2008-Apr-30 23:05:32 LOG4 log_alfabeam: ALFABEAM 6 12.480441900746637 7.362374128395274 2008-Apr-30 23:05:32 INFO2 take_spectra: Starting WAPP scan: 812100133 2008-Apr-30 23:05:33 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-30 23:05:33 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-30 23:05:33 LOG5 begin_task: Level: (5) ID = <10510> Status = 0 0 0 0 ok 2008-Apr-30 23:05:33 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-30 23:05:33 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11134.00 2008-Apr-30 23:05:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.525 > 1.4)! 2008-Apr-30 23:05:38 LOG4 check_wapp_levels: WAPP-1 power levels: 1.287 1.136 1.249 1.511 2008-Apr-30 23:05:38 LOG4 check_wapp_levels: WAPP-2 power levels: 1.460 1.364 1.435 1.510 2008-Apr-30 23:05:38 LOG4 check_wapp_levels: WAPP-3 power levels: 1.356 1.396 1.484 1.247 2008-Apr-30 23:05:38 LOG4 check_wapp_levels: WAPP-4 power levels: 1.525 1.506 1.331 1.340 2008-Apr-30 23:05:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.163336 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-30 23:05:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.163336 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 23:05:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.163336 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 23:05:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.163336 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-30 23:05:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.163336 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 23:05:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.163336 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 23:05:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.163336 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 23:05:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.163336 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 23:05:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.163336 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 23:05:39 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-30 23:05:39 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-30 23:05:39 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-30 23:05:39 LOG5 end_task: Level: (5) ID = <10510> Status = 0 0 0 0 ok 2008-Apr-30 23:05:39 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-30 23:05:39 LOG5 end_task: Level: (4) ID = <10509> Status = 0 0 0 0 ok 2008-Apr-30 23:05:39 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-30 23:05:39 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-30 23:05:39 LOG5 finish_task: Level: (3) ID = <10500> Status = 0 0 0 0 ok 2008-Apr-30 23:05:39 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-30 23:05:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 23:05:39 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-30 23:05:39 LOG5 end_task: Level: (3) ID = <10500> Status = 0 0 0 0 ok 2008-Apr-30 23:05:39 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-30 23:05:39 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 47.36 and ZA = 15.94 2008-Apr-30 23:05:39 LOG3 track_source: Calling 'track_source AGESVC1B_p1_069 47.36 15.9386327287 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-30 23:05:39 START begin_task: Starting task 'sending tracking commands' 2008-Apr-30 23:05:39 LOG5 begin_task: Level: (3) ID = <10511> Status = 0 0 0 0 ok 2008-Apr-30 23:05:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p1_069} INFO {Slewing to source 'AGESVC1B_p1_069' ...} 2008-Apr-30 23:05:39 INFO1 track_source: Starting to track AGESVC1B_p1_069 2008-Apr-30 23:05:39 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p1_069" 2008-Apr-30 23:05:39 LOG3 vw_send: To DATATAKING: set ra 47.36 2008-Apr-30 23:05:39 LOG3 vw_send: To DATATAKING: set dec 15.9386327287 2008-Apr-30 23:05:39 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-30 23:05:39 LOG3 vw_send: To DATATAKING: pnt tr 47.36 15.9386327287 -CF 2008-Apr-30 23:05:39 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-30 23:05:39 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-30 23:05:39 LOG5 finish_task: Level: (3) ID = <10511> Status = 0 0 0 0 ok 2008-Apr-30 23:05:39 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-30 23:05:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 23:05:40 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-30 23:05:40 LOG5 end_task: Level: (3) ID = <10511> Status = 0 0 0 0 ok 2008-Apr-30 23:05:40 LOG1 fixed_driftmap: Parameters: HA = +00:46:59.9 Start = 13:16:27.0 LST = 13:16:18.7 diff = 8.4 secs 2008-Apr-30 23:05:40 INFO2 fixed_driftmap: Waiting 6.4 seconds for RA 12:29:27 2008-Apr-30 23:05:40 INFO2 lstwait: Waiting for 6.3 secs from LST 13:16:19 to LST 13:16:25 ... 2008-Apr-30 23:05:40 LOG4 send_obs_status: To obs_status: <1> TASKTIME 6.3365854978452933 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-30 23:05:40 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-30 23:05:40 LOG5 begin_task: Level: (3) ID = <10512> Status = 0 0 0 0 ok 2008-Apr-30 23:05:40 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p1_069" 2008-Apr-30 23:05:40 LOG4 got_cormsg: From DATATAKING: set ra 47.36 2008-Apr-30 23:05:40 LOG4 got_cormsg: From DATATAKING: set dec 15.9386327287 2008-Apr-30 23:05:40 LOG4 got_cormsg: From DATATAKING: vw% 47.36 2008-Apr-30 23:05:40 LOG4 got_cormsg: From DATATAKING: vw% 15.9386327287 2008-Apr-30 23:05:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:05:40 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-30 23:05:40 LOG4 got_cormsg: From DATATAKING: pnt tr 47.36 15.9386327287 -CF 2008-Apr-30 23:05:40 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-30 23:05:40 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-30 23:05:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:05:45 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.845 and 1.124 2008-Apr-30 23:05:46 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-30 23:05:46 LOG5 end_task: Level: (3) ID = <10512> Status = 0 0 0 0 ok 2008-Apr-30 23:05:46 LOG4 lstwait: Finished waiting, the gui caused difference: 0.66606571999301423 2008-Apr-30 23:05:46 INFO3 lstwait: Finished waiting 2008-Apr-30 23:05:46 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-30 23:05:46 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-30 23:05:46 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-30 23:05:46 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-30 23:05:46 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-30 23:05:46 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-30 23:05:46 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-30 23:05:46 LOG5 begin_task: Level: (3) ID = <10513> Status = 0 0 0 0 ok 2008-Apr-30 23:05:46 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-30 23:05:46 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-30 23:05:46 INFO2 take_spectra: Starting WAPP scan: 812100134 2008-Apr-30 23:05:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-30 23:05:47 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-30 23:05:47 LOG5 begin_task: Level: (4) ID = <10514> Status = 0 0 0 0 ok 2008-Apr-30 23:05:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-30 23:05:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11148.00 2008-Apr-30 23:05:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.163336 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-30 23:05:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.163336 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 23:05:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.163336 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 23:05:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.163336 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-30 23:05:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.163336 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 23:05:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.163336 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 23:05:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.163336 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 23:05:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.163336 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 23:05:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.163336 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 23:05:49 WARNING WAPP=1+2+3+4-start_spectra: WARNING observing when not on source 2008-Apr-30 23:05:51 NOTE WAPP=1+2+3+4-start_spectra: Observing now on source 2008-Apr-30 23:06:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.753 < 0.8)! 2008-Apr-30 23:06:01 LOG4 check_wapp_levels: WAPP-1 power levels: 0.947 0.753 0.937 1.120 2008-Apr-30 23:06:01 LOG4 check_wapp_levels: WAPP-2 power levels: 1.079 0.995 1.057 1.118 2008-Apr-30 23:06:01 LOG4 check_wapp_levels: WAPP-3 power levels: 0.989 1.019 1.088 0.942 2008-Apr-30 23:06:01 LOG4 check_wapp_levels: WAPP-4 power levels: 1.115 1.097 0.972 0.977 2008-Apr-30 23:06:03 INFO5 check_wapp_levels: WAPP power levels are between 0.753 and 1.120 (still bad) 2008-Apr-30 23:06:05 INFO5 check_wapp_levels: WAPP power levels are between 0.755 and 1.120 (still bad) 2008-Apr-30 23:06:07 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.866 and 1.120 2008-Apr-30 23:06:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.795 < 0.8)! 2008-Apr-30 23:06:29 LOG4 check_wapp_levels: WAPP-1 power levels: 0.948 0.795 0.935 1.119 2008-Apr-30 23:06:29 LOG4 check_wapp_levels: WAPP-2 power levels: 1.080 0.996 1.060 1.120 2008-Apr-30 23:06:29 LOG4 check_wapp_levels: WAPP-3 power levels: 0.995 1.022 1.112 0.965 2008-Apr-30 23:06:29 LOG4 check_wapp_levels: WAPP-4 power levels: 1.119 1.100 0.974 0.979 2008-Apr-30 23:06:31 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.907 and 1.120 2008-Apr-30 23:06:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.759 < 0.8)! 2008-Apr-30 23:06:41 LOG4 check_wapp_levels: WAPP-1 power levels: 0.949 0.759 0.932 1.119 2008-Apr-30 23:06:41 LOG4 check_wapp_levels: WAPP-2 power levels: 1.078 0.997 1.063 1.123 2008-Apr-30 23:06:41 LOG4 check_wapp_levels: WAPP-3 power levels: 0.994 1.021 1.089 0.948 2008-Apr-30 23:06:41 LOG4 check_wapp_levels: WAPP-4 power levels: 1.117 1.099 0.973 0.979 2008-Apr-30 23:06:43 INFO5 check_wapp_levels: WAPP power levels are between 0.756 and 1.123 (still bad) 2008-Apr-30 23:06:45 INFO5 check_wapp_levels: WAPP power levels are between 0.755 and 1.124 (still bad) 2008-Apr-30 23:06:47 INFO5 check_wapp_levels: WAPP power levels are between 0.791 and 1.126 (still bad) 2008-Apr-30 23:06:49 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.858 and 1.126 2008-Apr-30 23:06:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.583 < 0.8)! 2008-Apr-30 23:06:56 LOG4 check_wapp_levels: WAPP-1 power levels: 0.962 0.583 0.929 1.117 2008-Apr-30 23:06:56 LOG4 check_wapp_levels: WAPP-2 power levels: 1.080 0.997 1.067 1.126 2008-Apr-30 23:06:56 LOG4 check_wapp_levels: WAPP-3 power levels: 0.999 1.029 1.091 0.943 2008-Apr-30 23:06:56 LOG4 check_wapp_levels: WAPP-4 power levels: 1.118 1.097 0.972 0.977 2008-Apr-30 23:06:58 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.825 and 1.125 2008-Apr-30 23:07:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.799 < 0.8)! 2008-Apr-30 23:07:08 LOG4 check_wapp_levels: WAPP-1 power levels: 0.954 0.799 0.927 1.116 2008-Apr-30 23:07:08 LOG4 check_wapp_levels: WAPP-2 power levels: 1.080 0.997 1.076 1.137 2008-Apr-30 23:07:08 LOG4 check_wapp_levels: WAPP-3 power levels: 0.995 1.023 1.091 0.947 2008-Apr-30 23:07:08 LOG4 check_wapp_levels: WAPP-4 power levels: 1.119 1.098 0.973 0.978 2008-Apr-30 23:07:10 INFO5 check_wapp_levels: WAPP power levels are between 0.794 and 1.139 (still bad) 2008-Apr-30 23:07:12 INFO5 check_wapp_levels: WAPP power levels are between 0.796 and 1.139 (still bad) 2008-Apr-30 23:07:14 INFO5 check_wapp_levels: WAPP power levels are between 0.795 and 1.137 (still bad) 2008-Apr-30 23:07:16 INFO5 check_wapp_levels: WAPP power levels are between 0.795 and 1.133 (still bad) 2008-Apr-30 23:07:18 INFO5 check_wapp_levels: WAPP power levels are between 0.791 and 1.129 (still bad) 2008-Apr-30 23:07:20 INFO5 check_wapp_levels: WAPP power levels are between 0.789 and 1.124 (still bad) 2008-Apr-30 23:07:22 INFO5 check_wapp_levels: WAPP power levels are between 0.791 and 1.123 (still bad) 2008-Apr-30 23:07:24 INFO5 check_wapp_levels: WAPP power levels are between 0.788 and 1.123 (still bad) 2008-Apr-30 23:07:26 INFO5 check_wapp_levels: WAPP power levels are between 0.787 and 1.123 (still bad) 2008-Apr-30 23:07:28 INFO5 check_wapp_levels: WAPP power levels are between 0.786 and 1.124 (still bad) 2008-Apr-30 23:07:30 INFO5 check_wapp_levels: WAPP power levels are between 0.786 and 1.125 (still bad) 2008-Apr-30 23:07:32 INFO5 check_wapp_levels: WAPP power levels are between 0.787 and 1.125 (still bad) 2008-Apr-30 23:07:34 INFO5 check_wapp_levels: WAPP power levels are between 0.785 and 1.124 (still bad) 2008-Apr-30 23:07:36 INFO5 check_wapp_levels: WAPP power levels are between 0.784 and 1.123 (still bad) 2008-Apr-30 23:07:38 INFO5 check_wapp_levels: WAPP power levels are between 0.783 and 1.123 (still bad) 2008-Apr-30 23:07:40 INFO5 check_wapp_levels: WAPP power levels are between 0.786 and 1.121 (still bad) 2008-Apr-30 23:07:42 INFO5 check_wapp_levels: WAPP power levels are between 0.785 and 1.121 (still bad) 2008-Apr-30 23:07:44 INFO5 check_wapp_levels: WAPP power levels are between 0.785 and 1.121 (still bad) 2008-Apr-30 23:07:46 INFO5 check_wapp_levels: WAPP power levels are between 0.787 and 1.124 (still bad) 2008-Apr-30 23:07:48 INFO5 check_wapp_levels: WAPP power levels are between 0.787 and 1.124 (still bad) 2008-Apr-30 23:07:50 INFO5 check_wapp_levels: WAPP power levels are between 0.785 and 1.124 (still bad) 2008-Apr-30 23:07:52 INFO5 check_wapp_levels: WAPP power levels are between 0.783 and 1.124 (still bad) 2008-Apr-30 23:07:54 INFO5 check_wapp_levels: WAPP power levels are between 0.782 and 1.122 (still bad) 2008-Apr-30 23:07:56 INFO5 check_wapp_levels: WAPP power levels are between 0.781 and 1.124 (still bad) 2008-Apr-30 23:07:58 INFO5 check_wapp_levels: WAPP power levels are between 0.780 and 1.127 (still bad) 2008-Apr-30 23:08:00 INFO5 check_wapp_levels: WAPP power levels are between 0.786 and 1.130 (still bad) 2008-Apr-30 23:08:02 INFO5 check_wapp_levels: WAPP power levels are between 0.777 and 1.132 (still bad) 2008-Apr-30 23:08:04 INFO5 check_wapp_levels: WAPP power levels are between 0.779 and 1.134 (still bad) 2008-Apr-30 23:08:06 INFO5 check_wapp_levels: WAPP power levels are between 0.772 and 1.135 (still bad) 2008-Apr-30 23:08:08 INFO5 check_wapp_levels: WAPP power levels are between 0.594 and 1.134 (still bad) 2008-Apr-30 23:08:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.526 < 0.8)! 2008-Apr-30 23:08:10 LOG4 check_wapp_levels: WAPP-1 power levels: 0.948 0.526 0.937 1.129 2008-Apr-30 23:08:10 LOG4 check_wapp_levels: WAPP-2 power levels: 1.080 0.995 1.070 1.130 2008-Apr-30 23:08:10 LOG4 check_wapp_levels: WAPP-3 power levels: 0.994 1.020 1.088 0.943 2008-Apr-30 23:08:10 LOG4 check_wapp_levels: WAPP-4 power levels: 1.119 1.097 0.974 0.978 2008-Apr-30 23:08:12 INFO5 check_wapp_levels: WAPP power levels are between 0.663 and 1.131 (still bad) 2008-Apr-30 23:08:14 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.829 and 1.131 2008-Apr-30 23:08:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.798 < 0.8)! 2008-Apr-30 23:08:19 LOG4 check_wapp_levels: WAPP-1 power levels: 0.948 0.798 0.935 1.124 2008-Apr-30 23:08:19 LOG4 check_wapp_levels: WAPP-2 power levels: 1.077 0.995 1.062 1.122 2008-Apr-30 23:08:19 LOG4 check_wapp_levels: WAPP-3 power levels: 0.994 1.021 1.089 0.945 2008-Apr-30 23:08:19 LOG4 check_wapp_levels: WAPP-4 power levels: 1.118 1.097 0.974 0.977 2008-Apr-30 23:08:21 INFO5 check_wapp_levels: WAPP power levels are between 0.785 and 1.122 (still bad) 2008-Apr-30 23:08:23 INFO5 check_wapp_levels: WAPP power levels are between 0.778 and 1.123 (still bad) 2008-Apr-30 23:08:25 INFO5 check_wapp_levels: WAPP power levels are between 0.771 and 1.123 (still bad) 2008-Apr-30 23:08:27 INFO5 check_wapp_levels: WAPP power levels are between 0.765 and 1.125 (still bad) 2008-Apr-30 23:08:29 INFO5 check_wapp_levels: WAPP power levels are between 0.755 and 1.124 (still bad) 2008-Apr-30 23:08:31 INFO5 check_wapp_levels: WAPP power levels are between 0.780 and 1.123 (still bad) 2008-Apr-30 23:08:33 INFO5 check_wapp_levels: WAPP power levels are between 0.780 and 1.122 (still bad) 2008-Apr-30 23:08:35 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.803 and 1.122 2008-Apr-30 23:08:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.586 < 0.8)! 2008-Apr-30 23:08:37 LOG4 check_wapp_levels: WAPP-1 power levels: 0.949 0.586 0.930 1.116 2008-Apr-30 23:08:37 LOG4 check_wapp_levels: WAPP-2 power levels: 1.083 0.996 1.062 1.122 2008-Apr-30 23:08:37 LOG4 check_wapp_levels: WAPP-3 power levels: 0.997 1.025 1.088 0.944 2008-Apr-30 23:08:37 LOG4 check_wapp_levels: WAPP-4 power levels: 1.115 1.097 0.973 0.978 2008-Apr-30 23:08:39 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.803 and 1.122 2008-Apr-30 23:08:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.621 < 0.8)! 2008-Apr-30 23:08:41 LOG4 check_wapp_levels: WAPP-1 power levels: 0.947 0.621 0.929 1.116 2008-Apr-30 23:08:41 LOG4 check_wapp_levels: WAPP-2 power levels: 1.081 0.997 1.062 1.122 2008-Apr-30 23:08:41 LOG4 check_wapp_levels: WAPP-3 power levels: 0.999 1.029 1.086 0.943 2008-Apr-30 23:08:41 LOG4 check_wapp_levels: WAPP-4 power levels: 1.115 1.098 0.972 0.977 2008-Apr-30 23:08:43 INFO5 check_wapp_levels: WAPP power levels are between 0.654 and 1.124 (still bad) 2008-Apr-30 23:08:45 INFO5 check_wapp_levels: WAPP power levels are between 0.668 and 1.122 (still bad) 2008-Apr-30 23:08:47 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.907 and 1.122 2008-Apr-30 23:08:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.749 < 0.8)! 2008-Apr-30 23:08:51 LOG4 check_wapp_levels: WAPP-1 power levels: 0.947 0.749 0.937 1.119 2008-Apr-30 23:08:51 LOG4 check_wapp_levels: WAPP-2 power levels: 1.081 0.997 1.062 1.122 2008-Apr-30 23:08:51 LOG4 check_wapp_levels: WAPP-3 power levels: 1.002 1.031 1.088 0.941 2008-Apr-30 23:08:51 LOG4 check_wapp_levels: WAPP-4 power levels: 1.117 1.097 0.974 0.978 2008-Apr-30 23:08:53 INFO5 check_wapp_levels: WAPP power levels are between 0.799 and 1.121 (still bad) 2008-Apr-30 23:08:55 INFO5 check_wapp_levels: WAPP power levels are between 0.654 and 1.122 (still bad) 2008-Apr-30 23:08:57 INFO5 check_wapp_levels: WAPP power levels are between 0.763 and 1.123 (still bad) 2008-Apr-30 23:08:59 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.891 and 1.123 2008-Apr-30 23:09:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.785 < 0.8)! 2008-Apr-30 23:09:01 LOG4 check_wapp_levels: WAPP-1 power levels: 0.951 0.785 0.942 1.120 2008-Apr-30 23:09:01 LOG4 check_wapp_levels: WAPP-2 power levels: 1.077 0.996 1.063 1.122 2008-Apr-30 23:09:01 LOG4 check_wapp_levels: WAPP-3 power levels: 0.999 1.024 1.088 0.941 2008-Apr-30 23:09:01 LOG4 check_wapp_levels: WAPP-4 power levels: 1.118 1.098 0.973 0.980 2008-Apr-30 23:09:03 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.925 and 1.123 2008-Apr-30 23:09:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.788 < 0.8)! 2008-Apr-30 23:09:13 LOG4 check_wapp_levels: WAPP-1 power levels: 0.947 0.788 0.941 1.120 2008-Apr-30 23:09:13 LOG4 check_wapp_levels: WAPP-2 power levels: 1.080 0.994 1.070 1.130 2008-Apr-30 23:09:13 LOG4 check_wapp_levels: WAPP-3 power levels: 0.996 1.021 1.086 0.941 2008-Apr-30 23:09:13 LOG4 check_wapp_levels: WAPP-4 power levels: 1.115 1.099 0.971 0.980 2008-Apr-30 23:09:15 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.842 and 1.131 2008-Apr-30 23:09:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.745 < 0.8)! 2008-Apr-30 23:09:17 LOG4 check_wapp_levels: WAPP-1 power levels: 0.950 0.745 0.937 1.120 2008-Apr-30 23:09:17 LOG4 check_wapp_levels: WAPP-2 power levels: 1.078 0.995 1.073 1.131 2008-Apr-30 23:09:17 LOG4 check_wapp_levels: WAPP-3 power levels: 0.997 1.022 1.087 0.943 2008-Apr-30 23:09:17 LOG4 check_wapp_levels: WAPP-4 power levels: 1.115 1.097 0.972 0.977 2008-Apr-30 23:09:19 INFO5 check_wapp_levels: WAPP power levels are between 0.605 and 1.132 (still bad) 2008-Apr-30 23:09:21 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.848 and 1.132 2008-Apr-30 23:09:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.485 < 0.8)! 2008-Apr-30 23:09:27 LOG4 check_wapp_levels: WAPP-1 power levels: 0.947 0.485 0.939 1.121 2008-Apr-30 23:09:27 LOG4 check_wapp_levels: WAPP-2 power levels: 1.079 0.994 1.071 1.131 2008-Apr-30 23:09:27 LOG4 check_wapp_levels: WAPP-3 power levels: 0.992 1.018 1.084 0.942 2008-Apr-30 23:09:27 LOG4 check_wapp_levels: WAPP-4 power levels: 1.113 1.098 0.973 0.977 2008-Apr-30 23:09:29 INFO5 check_wapp_levels: WAPP power levels are between 0.585 and 1.130 (still bad) 2008-Apr-30 23:09:31 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.862 and 1.129 2008-Apr-30 23:09:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.624 < 0.8)! 2008-Apr-30 23:09:37 LOG4 check_wapp_levels: WAPP-1 power levels: 0.950 0.624 0.941 1.121 2008-Apr-30 23:09:37 LOG4 check_wapp_levels: WAPP-2 power levels: 1.078 0.992 1.065 1.125 2008-Apr-30 23:09:37 LOG4 check_wapp_levels: WAPP-3 power levels: 0.993 1.017 1.084 0.942 2008-Apr-30 23:09:37 LOG4 check_wapp_levels: WAPP-4 power levels: 1.115 1.099 0.971 0.978 2008-Apr-30 23:09:39 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.802 and 1.123 2008-Apr-30 23:09:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.681 < 0.8)! 2008-Apr-30 23:09:50 LOG4 check_wapp_levels: WAPP-1 power levels: 0.947 0.681 0.935 1.118 2008-Apr-30 23:09:50 LOG4 check_wapp_levels: WAPP-2 power levels: 1.077 0.995 1.065 1.123 2008-Apr-30 23:09:50 LOG4 check_wapp_levels: WAPP-3 power levels: 0.991 1.018 1.088 0.942 2008-Apr-30 23:09:50 LOG4 check_wapp_levels: WAPP-4 power levels: 1.114 1.097 0.971 0.977 2008-Apr-30 23:09:52 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.887 and 1.124 2008-Apr-30 23:09:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.791 < 0.8)! 2008-Apr-30 23:09:56 LOG4 check_wapp_levels: WAPP-1 power levels: 0.949 0.791 0.943 1.121 2008-Apr-30 23:09:56 LOG4 check_wapp_levels: WAPP-2 power levels: 1.078 0.994 1.063 1.122 2008-Apr-30 23:09:56 LOG4 check_wapp_levels: WAPP-3 power levels: 0.994 1.019 1.088 0.942 2008-Apr-30 23:09:56 LOG4 check_wapp_levels: WAPP-4 power levels: 1.113 1.098 0.971 0.978 2008-Apr-30 23:09:58 INFO5 check_wapp_levels: WAPP power levels are between 0.795 and 1.121 (still bad) 2008-Apr-30 23:10:00 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.810 and 1.122 2008-Apr-30 23:10:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.740 < 0.8)! 2008-Apr-30 23:10:02 LOG4 check_wapp_levels: WAPP-1 power levels: 0.952 0.740 0.940 1.121 2008-Apr-30 23:10:02 LOG4 check_wapp_levels: WAPP-2 power levels: 1.077 0.994 1.062 1.120 2008-Apr-30 23:10:02 LOG4 check_wapp_levels: WAPP-3 power levels: 0.994 1.020 1.089 0.942 2008-Apr-30 23:10:02 LOG4 check_wapp_levels: WAPP-4 power levels: 1.113 1.099 0.972 0.979 2008-Apr-30 23:10:04 INFO5 check_wapp_levels: WAPP power levels are between 0.755 and 1.120 (still bad) 2008-Apr-30 23:10:06 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.848 and 1.121 2008-Apr-30 23:10:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.762 < 0.8)! 2008-Apr-30 23:10:16 LOG4 check_wapp_levels: WAPP-1 power levels: 0.948 0.762 0.940 1.121 2008-Apr-30 23:10:16 LOG4 check_wapp_levels: WAPP-2 power levels: 1.078 0.995 1.062 1.121 2008-Apr-30 23:10:16 LOG4 check_wapp_levels: WAPP-3 power levels: 0.994 1.018 1.087 0.941 2008-Apr-30 23:10:16 LOG4 check_wapp_levels: WAPP-4 power levels: 1.113 1.097 0.971 0.977 2008-Apr-30 23:10:18 INFO5 check_wapp_levels: WAPP power levels are between 0.724 and 1.122 (still bad) 2008-Apr-30 23:10:20 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.818 and 1.122 2008-Apr-30 23:10:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.655 < 0.8)! 2008-Apr-30 23:10:24 LOG4 check_wapp_levels: WAPP-1 power levels: 0.948 0.655 0.942 1.122 2008-Apr-30 23:10:24 LOG4 check_wapp_levels: WAPP-2 power levels: 1.078 0.995 1.062 1.123 2008-Apr-30 23:10:24 LOG4 check_wapp_levels: WAPP-3 power levels: 0.993 1.020 1.089 0.944 2008-Apr-30 23:10:24 LOG4 check_wapp_levels: WAPP-4 power levels: 1.114 1.099 0.972 0.978 2008-Apr-30 23:10:26 INFO5 check_wapp_levels: WAPP power levels are between 0.648 and 1.123 (still bad) 2008-Apr-30 23:10:28 INFO5 check_wapp_levels: WAPP power levels are between 0.791 and 1.123 (still bad) 2008-Apr-30 23:10:30 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.806 and 1.123 2008-Apr-30 23:10:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.727 < 0.8)! 2008-Apr-30 23:10:44 LOG4 check_wapp_levels: WAPP-1 power levels: 0.947 0.727 0.937 1.121 2008-Apr-30 23:10:44 LOG4 check_wapp_levels: WAPP-2 power levels: 1.079 0.994 1.063 1.122 2008-Apr-30 23:10:44 LOG4 check_wapp_levels: WAPP-3 power levels: 0.992 1.019 1.091 0.945 2008-Apr-30 23:10:44 LOG4 check_wapp_levels: WAPP-4 power levels: 1.113 1.099 0.971 0.979 2008-Apr-30 23:10:46 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.838 and 1.123 2008-Apr-30 23:10:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.722 < 0.8)! 2008-Apr-30 23:10:48 LOG4 check_wapp_levels: WAPP-1 power levels: 0.949 0.722 0.941 1.123 2008-Apr-30 23:10:48 LOG4 check_wapp_levels: WAPP-2 power levels: 1.077 0.995 1.062 1.122 2008-Apr-30 23:10:48 LOG4 check_wapp_levels: WAPP-3 power levels: 0.994 1.022 1.090 0.945 2008-Apr-30 23:10:48 LOG4 check_wapp_levels: WAPP-4 power levels: 1.114 1.099 0.973 0.978 2008-Apr-30 23:10:50 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.808 and 1.123 2008-Apr-30 23:10:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.726 < 0.8)! 2008-Apr-30 23:10:52 LOG4 check_wapp_levels: WAPP-1 power levels: 0.949 0.726 0.943 1.122 2008-Apr-30 23:10:52 LOG4 check_wapp_levels: WAPP-2 power levels: 1.079 0.995 1.062 1.122 2008-Apr-30 23:10:52 LOG4 check_wapp_levels: WAPP-3 power levels: 0.995 1.020 1.088 0.944 2008-Apr-30 23:10:52 LOG4 check_wapp_levels: WAPP-4 power levels: 1.114 1.099 0.972 0.978 2008-Apr-30 23:10:54 INFO5 check_wapp_levels: WAPP power levels are between 0.680 and 1.123 (still bad) 2008-Apr-30 23:10:56 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.863 and 1.122 2008-Apr-30 23:10:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.616 < 0.8)! 2008-Apr-30 23:10:58 LOG4 check_wapp_levels: WAPP-1 power levels: 0.949 0.616 0.943 1.123 2008-Apr-30 23:10:58 LOG4 check_wapp_levels: WAPP-2 power levels: 1.080 0.997 1.062 1.122 2008-Apr-30 23:10:58 LOG4 check_wapp_levels: WAPP-3 power levels: 0.995 1.021 1.087 0.944 2008-Apr-30 23:10:58 LOG4 check_wapp_levels: WAPP-4 power levels: 1.116 1.098 0.973 0.978 2008-Apr-30 23:11:00 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.908 and 1.122 2008-Apr-30 23:11:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.652 < 0.8)! 2008-Apr-30 23:11:02 LOG4 check_wapp_levels: WAPP-1 power levels: 0.949 0.652 0.940 1.123 2008-Apr-30 23:11:02 LOG4 check_wapp_levels: WAPP-2 power levels: 1.079 0.995 1.061 1.123 2008-Apr-30 23:11:02 LOG4 check_wapp_levels: WAPP-3 power levels: 0.995 1.022 1.087 0.943 2008-Apr-30 23:11:02 LOG4 check_wapp_levels: WAPP-4 power levels: 1.115 1.097 0.972 0.978 2008-Apr-30 23:11:04 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.825 and 1.122 2008-Apr-30 23:11:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.626 < 0.8)! 2008-Apr-30 23:11:08 LOG4 check_wapp_levels: WAPP-1 power levels: 0.952 0.626 0.938 1.122 2008-Apr-30 23:11:08 LOG4 check_wapp_levels: WAPP-2 power levels: 1.078 0.997 1.061 1.123 2008-Apr-30 23:11:08 LOG4 check_wapp_levels: WAPP-3 power levels: 0.996 1.022 1.089 0.942 2008-Apr-30 23:11:08 LOG4 check_wapp_levels: WAPP-4 power levels: 1.117 1.099 0.973 0.979 2008-Apr-30 23:11:10 INFO5 check_wapp_levels: WAPP power levels are between 0.484 and 1.123 (still bad) 2008-Apr-30 23:11:13 INFO5 check_wapp_levels: WAPP power levels are between 0.768 and 1.125 (still bad) 2008-Apr-30 23:11:15 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.898 and 1.123 2008-Apr-30 23:11:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.694 < 0.8)! 2008-Apr-30 23:11:17 LOG4 check_wapp_levels: WAPP-1 power levels: 0.953 0.694 0.942 1.123 2008-Apr-30 23:11:17 LOG4 check_wapp_levels: WAPP-2 power levels: 1.083 0.996 1.062 1.124 2008-Apr-30 23:11:17 LOG4 check_wapp_levels: WAPP-3 power levels: 0.997 1.022 1.089 0.943 2008-Apr-30 23:11:17 LOG4 check_wapp_levels: WAPP-4 power levels: 1.117 1.100 0.974 0.979 2008-Apr-30 23:11:19 INFO5 check_wapp_levels: WAPP power levels are between 0.473 and 1.125 (still bad) 2008-Apr-30 23:11:21 INFO5 check_wapp_levels: WAPP power levels are between 0.658 and 1.125 (still bad) 2008-Apr-30 23:11:23 INFO5 check_wapp_levels: WAPP power levels are between 0.783 and 1.126 (still bad) 2008-Apr-30 23:11:25 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.872 and 1.126 2008-Apr-30 23:11:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.754 < 0.8)! 2008-Apr-30 23:11:39 LOG4 check_wapp_levels: WAPP-1 power levels: 0.951 0.754 0.939 1.123 2008-Apr-30 23:11:39 LOG4 check_wapp_levels: WAPP-2 power levels: 1.079 0.994 1.062 1.124 2008-Apr-30 23:11:39 LOG4 check_wapp_levels: WAPP-3 power levels: 0.994 1.019 1.089 0.943 2008-Apr-30 23:11:39 LOG4 check_wapp_levels: WAPP-4 power levels: 1.116 1.100 0.973 0.980 2008-Apr-30 23:11:41 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.881 and 1.124 2008-Apr-30 23:11:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.564 < 0.8)! 2008-Apr-30 23:11:45 LOG4 check_wapp_levels: WAPP-1 power levels: 0.951 0.564 0.939 1.122 2008-Apr-30 23:11:45 LOG4 check_wapp_levels: WAPP-2 power levels: 1.077 0.995 1.064 1.124 2008-Apr-30 23:11:45 LOG4 check_wapp_levels: WAPP-3 power levels: 0.994 1.019 1.090 0.943 2008-Apr-30 23:11:45 LOG4 check_wapp_levels: WAPP-4 power levels: 1.116 1.100 0.974 0.981 2008-Apr-30 23:11:47 INFO5 check_wapp_levels: WAPP power levels are between 0.769 and 1.124 (still bad) 2008-Apr-30 23:11:49 INFO5 check_wapp_levels: WAPP power levels are between 0.742 and 1.124 (still bad) 2008-Apr-30 23:11:51 INFO5 check_wapp_levels: WAPP power levels are between 0.723 and 1.124 (still bad) 2008-Apr-30 23:11:53 INFO5 check_wapp_levels: WAPP power levels are between 0.762 and 1.124 (still bad) 2008-Apr-30 23:11:55 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.844 and 1.125 2008-Apr-30 23:11:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.775 < 0.8)! 2008-Apr-30 23:11:59 LOG4 check_wapp_levels: WAPP-1 power levels: 0.952 0.775 0.944 1.125 2008-Apr-30 23:11:59 LOG4 check_wapp_levels: WAPP-2 power levels: 1.078 0.996 1.063 1.122 2008-Apr-30 23:11:59 LOG4 check_wapp_levels: WAPP-3 power levels: 0.999 1.019 1.093 0.943 2008-Apr-30 23:11:59 LOG4 check_wapp_levels: WAPP-4 power levels: 1.118 1.101 0.975 0.981 2008-Apr-30 23:12:01 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.916 and 1.124 2008-Apr-30 23:12:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.777 < 0.8)! 2008-Apr-30 23:12:21 LOG4 check_wapp_levels: WAPP-1 power levels: 0.963 0.777 0.946 1.126 2008-Apr-30 23:12:21 LOG4 check_wapp_levels: WAPP-2 power levels: 1.081 0.995 1.060 1.122 2008-Apr-30 23:12:21 LOG4 check_wapp_levels: WAPP-3 power levels: 1.001 1.022 1.094 0.942 2008-Apr-30 23:12:21 LOG4 check_wapp_levels: WAPP-4 power levels: 1.132 1.115 0.987 0.993 2008-Apr-30 23:12:23 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.850 and 1.132 2008-Apr-30 23:12:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.712 < 0.8)! 2008-Apr-30 23:12:31 LOG4 check_wapp_levels: WAPP-1 power levels: 0.975 0.712 0.952 1.127 2008-Apr-30 23:12:31 LOG4 check_wapp_levels: WAPP-2 power levels: 1.083 0.995 1.062 1.122 2008-Apr-30 23:12:31 LOG4 check_wapp_levels: WAPP-3 power levels: 1.005 1.021 1.098 0.943 2008-Apr-30 23:12:31 LOG4 check_wapp_levels: WAPP-4 power levels: 1.118 1.105 0.976 0.984 2008-Apr-30 23:12:33 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.854 and 1.129 2008-Apr-30 23:12:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.634 < 0.8)! 2008-Apr-30 23:12:40 LOG4 check_wapp_levels: WAPP-1 power levels: 0.968 0.634 0.952 1.131 2008-Apr-30 23:12:40 LOG4 check_wapp_levels: WAPP-2 power levels: 1.079 0.995 1.061 1.121 2008-Apr-30 23:12:40 LOG4 check_wapp_levels: WAPP-3 power levels: 0.999 1.020 1.094 0.942 2008-Apr-30 23:12:40 LOG4 check_wapp_levels: WAPP-4 power levels: 1.119 1.105 0.976 0.983 2008-Apr-30 23:12:42 INFO5 check_wapp_levels: WAPP power levels are between 0.756 and 1.134 (still bad) 2008-Apr-30 23:12:44 INFO5 check_wapp_levels: WAPP power levels are between 0.626 and 1.137 (still bad) 2008-Apr-30 23:12:46 INFO5 check_wapp_levels: WAPP power levels are between 0.784 and 1.136 (still bad) 2008-Apr-30 23:12:48 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.801 and 1.138 2008-Apr-30 23:12:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.767 < 0.8)! 2008-Apr-30 23:12:52 LOG4 check_wapp_levels: WAPP-1 power levels: 0.959 0.767 0.951 1.133 2008-Apr-30 23:12:52 LOG4 check_wapp_levels: WAPP-2 power levels: 1.087 0.999 1.061 1.122 2008-Apr-30 23:12:52 LOG4 check_wapp_levels: WAPP-3 power levels: 0.995 1.018 1.093 0.942 2008-Apr-30 23:12:52 LOG4 check_wapp_levels: WAPP-4 power levels: 1.116 1.103 0.973 0.982 2008-Apr-30 23:12:54 INFO5 check_wapp_levels: WAPP power levels are between 0.780 and 1.135 (still bad) 2008-Apr-30 23:12:56 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.812 and 1.134 2008-Apr-30 23:12:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.764 < 0.8)! 2008-Apr-30 23:12:58 LOG4 check_wapp_levels: WAPP-1 power levels: 0.978 0.764 0.957 1.130 2008-Apr-30 23:12:58 LOG4 check_wapp_levels: WAPP-2 power levels: 1.091 1.006 1.062 1.121 2008-Apr-30 23:12:58 LOG4 check_wapp_levels: WAPP-3 power levels: 1.003 1.018 1.096 0.941 2008-Apr-30 23:12:58 LOG4 check_wapp_levels: WAPP-4 power levels: 1.116 1.103 0.973 0.982 2008-Apr-30 23:13:00 INFO5 check_wapp_levels: WAPP power levels are between 0.730 and 1.132 (still bad) 2008-Apr-30 23:13:02 INFO5 check_wapp_levels: WAPP power levels are between 0.727 and 1.133 (still bad) 2008-Apr-30 23:13:04 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.941 and 1.133 2008-Apr-30 23:13:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.778 < 0.8)! 2008-Apr-30 23:13:06 LOG4 check_wapp_levels: WAPP-1 power levels: 0.972 0.778 0.955 1.133 2008-Apr-30 23:13:06 LOG4 check_wapp_levels: WAPP-2 power levels: 1.089 1.002 1.061 1.121 2008-Apr-30 23:13:06 LOG4 check_wapp_levels: WAPP-3 power levels: 0.997 1.018 1.093 0.942 2008-Apr-30 23:13:06 LOG4 check_wapp_levels: WAPP-4 power levels: 1.115 1.103 0.973 0.982 2008-Apr-30 23:13:08 INFO5 check_wapp_levels: WAPP power levels are between 0.789 and 1.131 (still bad) 2008-Apr-30 23:13:10 INFO5 check_wapp_levels: WAPP power levels are between 0.772 and 1.132 (still bad) 2008-Apr-30 23:13:12 INFO5 check_wapp_levels: WAPP power levels are between 0.769 and 1.133 (still bad) 2008-Apr-30 23:13:14 INFO5 check_wapp_levels: WAPP power levels are between 0.768 and 1.131 (still bad) 2008-Apr-30 23:13:16 INFO5 check_wapp_levels: WAPP power levels are between 0.724 and 1.130 (still bad) 2008-Apr-30 23:13:18 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.804 and 1.129 2008-Apr-30 23:13:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.779 < 0.8)! 2008-Apr-30 23:13:20 LOG4 check_wapp_levels: WAPP-1 power levels: 0.965 0.779 0.944 1.129 2008-Apr-30 23:13:20 LOG4 check_wapp_levels: WAPP-2 power levels: 1.083 0.999 1.062 1.122 2008-Apr-30 23:13:20 LOG4 check_wapp_levels: WAPP-3 power levels: 0.991 1.017 1.090 0.942 2008-Apr-30 23:13:20 LOG4 check_wapp_levels: WAPP-4 power levels: 1.116 1.103 0.972 0.982 2008-Apr-30 23:13:22 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.813 and 1.127 2008-Apr-30 23:13:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.701 < 0.8)! 2008-Apr-30 23:13:28 LOG4 check_wapp_levels: WAPP-1 power levels: 0.965 0.701 0.945 1.126 2008-Apr-30 23:13:28 LOG4 check_wapp_levels: WAPP-2 power levels: 1.079 0.995 1.061 1.121 2008-Apr-30 23:13:28 LOG4 check_wapp_levels: WAPP-3 power levels: 0.993 1.017 1.091 0.941 2008-Apr-30 23:13:28 LOG4 check_wapp_levels: WAPP-4 power levels: 1.116 1.102 0.972 0.980 2008-Apr-30 23:13:30 INFO5 check_wapp_levels: WAPP power levels are between 0.772 and 1.127 (still bad) 2008-Apr-30 23:13:32 INFO5 check_wapp_levels: WAPP power levels are between 0.706 and 1.125 (still bad) 2008-Apr-30 23:13:34 INFO5 check_wapp_levels: WAPP power levels are between 0.698 and 1.127 (still bad) 2008-Apr-30 23:13:36 INFO5 check_wapp_levels: WAPP power levels are between 0.696 and 1.126 (still bad) 2008-Apr-30 23:13:38 INFO5 check_wapp_levels: WAPP power levels are between 0.792 and 1.126 (still bad) 2008-Apr-30 23:13:40 INFO5 check_wapp_levels: WAPP power levels are between 0.795 and 1.126 (still bad) 2008-Apr-30 23:13:42 INFO5 check_wapp_levels: WAPP power levels are between 0.792 and 1.126 (still bad) 2008-Apr-30 23:13:44 INFO5 check_wapp_levels: WAPP power levels are between 0.792 and 1.126 (still bad) 2008-Apr-30 23:13:46 INFO5 check_wapp_levels: WAPP power levels are between 0.792 and 1.125 (still bad) 2008-Apr-30 23:13:48 INFO5 check_wapp_levels: WAPP power levels are between 0.716 and 1.125 (still bad) 2008-Apr-30 23:13:50 INFO5 check_wapp_levels: WAPP power levels are between 0.545 and 1.125 (still bad) 2008-Apr-30 23:13:52 INFO5 check_wapp_levels: WAPP power levels are between 0.545 and 1.124 (still bad) 2008-Apr-30 23:13:54 INFO5 check_wapp_levels: WAPP power levels are between 0.500 and 1.126 (still bad) 2008-Apr-30 23:13:56 INFO5 check_wapp_levels: WAPP power levels are between 0.544 and 1.126 (still bad) 2008-Apr-30 23:13:58 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.839 and 1.129 2008-Apr-30 23:14:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.716 < 0.8)! 2008-Apr-30 23:14:11 LOG4 check_wapp_levels: WAPP-1 power levels: 0.957 0.716 0.940 1.126 2008-Apr-30 23:14:11 LOG4 check_wapp_levels: WAPP-2 power levels: 1.078 0.994 1.061 1.122 2008-Apr-30 23:14:11 LOG4 check_wapp_levels: WAPP-3 power levels: 0.993 1.018 1.087 0.941 2008-Apr-30 23:14:11 LOG4 check_wapp_levels: WAPP-4 power levels: 1.136 1.121 0.989 0.998 2008-Apr-30 23:14:13 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.879 and 1.137 2008-Apr-30 23:14:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.780 < 0.8)! 2008-Apr-30 23:14:15 LOG4 check_wapp_levels: WAPP-1 power levels: 0.965 0.780 0.949 1.127 2008-Apr-30 23:14:15 LOG4 check_wapp_levels: WAPP-2 power levels: 1.080 0.993 1.061 1.121 2008-Apr-30 23:14:15 LOG4 check_wapp_levels: WAPP-3 power levels: 0.995 1.018 1.091 0.942 2008-Apr-30 23:14:15 LOG4 check_wapp_levels: WAPP-4 power levels: 1.138 1.123 0.992 1.000 2008-Apr-30 23:14:17 INFO5 check_wapp_levels: WAPP power levels are between 0.745 and 1.140 (still bad) 2008-Apr-30 23:14:19 INFO5 check_wapp_levels: WAPP power levels are between 0.619 and 1.147 (still bad) 2008-Apr-30 23:14:21 INFO5 check_wapp_levels: WAPP power levels are between 0.746 and 1.156 (still bad) 2008-Apr-30 23:14:23 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.840 and 1.169 2008-Apr-30 23:14:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.752 < 0.8)! 2008-Apr-30 23:14:33 LOG4 check_wapp_levels: WAPP-1 power levels: 0.958 0.752 0.945 1.130 2008-Apr-30 23:14:33 LOG4 check_wapp_levels: WAPP-2 power levels: 1.081 0.997 1.064 1.122 2008-Apr-30 23:14:33 LOG4 check_wapp_levels: WAPP-3 power levels: 0.992 1.018 1.090 0.941 2008-Apr-30 23:14:33 LOG4 check_wapp_levels: WAPP-4 power levels: 1.160 1.153 1.012 1.026 2008-Apr-30 23:14:35 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.862 and 1.148 2008-Apr-30 23:14:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.797 < 0.8)! 2008-Apr-30 23:14:45 LOG4 check_wapp_levels: WAPP-1 power levels: 0.963 0.797 0.989 1.183 2008-Apr-30 23:14:45 LOG4 check_wapp_levels: WAPP-2 power levels: 1.080 0.998 1.063 1.124 2008-Apr-30 23:14:45 LOG4 check_wapp_levels: WAPP-3 power levels: 0.995 1.020 1.092 0.942 2008-Apr-30 23:14:45 LOG4 check_wapp_levels: WAPP-4 power levels: 1.115 1.103 0.972 0.981 2008-Apr-30 23:14:47 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.880 and 1.198 2008-Apr-30 23:14:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.601 < 0.8)! 2008-Apr-30 23:14:53 LOG4 check_wapp_levels: WAPP-1 power levels: 0.958 0.601 1.010 1.210 2008-Apr-30 23:14:53 LOG4 check_wapp_levels: WAPP-2 power levels: 1.088 1.001 1.064 1.123 2008-Apr-30 23:14:53 LOG4 check_wapp_levels: WAPP-3 power levels: 0.993 1.019 1.089 0.941 2008-Apr-30 23:14:53 LOG4 check_wapp_levels: WAPP-4 power levels: 1.117 1.104 0.973 0.981 2008-Apr-30 23:14:55 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.846 and 1.198 2008-Apr-30 23:15:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.723 < 0.8)! 2008-Apr-30 23:15:11 LOG4 check_wapp_levels: WAPP-1 power levels: 0.961 0.723 0.939 1.124 2008-Apr-30 23:15:11 LOG4 check_wapp_levels: WAPP-2 power levels: 1.086 0.999 1.065 1.123 2008-Apr-30 23:15:11 LOG4 check_wapp_levels: WAPP-3 power levels: 0.994 1.020 1.091 0.945 2008-Apr-30 23:15:11 LOG4 check_wapp_levels: WAPP-4 power levels: 1.118 1.102 0.974 0.980 2008-Apr-30 23:15:13 INFO5 check_wapp_levels: WAPP power levels are between 0.709 and 1.125 (still bad) 2008-Apr-30 23:15:15 INFO5 check_wapp_levels: WAPP power levels are between 0.714 and 1.124 (still bad) 2008-Apr-30 23:15:17 INFO5 check_wapp_levels: WAPP power levels are between 0.554 and 1.125 (still bad) 2008-Apr-30 23:15:19 INFO5 check_wapp_levels: WAPP power levels are between 0.790 and 1.124 (still bad) 2008-Apr-30 23:15:21 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.841 and 1.125 2008-Apr-30 23:15:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.684 < 0.8)! 2008-Apr-30 23:15:23 LOG4 check_wapp_levels: WAPP-1 power levels: 0.957 0.684 0.940 1.126 2008-Apr-30 23:15:23 LOG4 check_wapp_levels: WAPP-2 power levels: 1.097 1.011 1.064 1.124 2008-Apr-30 23:15:23 LOG4 check_wapp_levels: WAPP-3 power levels: 0.996 1.022 1.092 0.943 2008-Apr-30 23:15:23 LOG4 check_wapp_levels: WAPP-4 power levels: 1.118 1.101 0.975 0.980 2008-Apr-30 23:15:25 INFO5 check_wapp_levels: WAPP power levels are between 0.714 and 1.125 (still bad) 2008-Apr-30 23:15:27 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.818 and 1.124 2008-Apr-30 23:15:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.739 < 0.8)! 2008-Apr-30 23:15:32 LOG4 check_wapp_levels: WAPP-1 power levels: 0.958 0.739 0.941 1.124 2008-Apr-30 23:15:32 LOG4 check_wapp_levels: WAPP-2 power levels: 1.092 1.005 1.064 1.124 2008-Apr-30 23:15:32 LOG4 check_wapp_levels: WAPP-3 power levels: 0.997 1.022 1.090 0.943 2008-Apr-30 23:15:32 LOG4 check_wapp_levels: WAPP-4 power levels: 1.119 1.103 0.976 0.982 2008-Apr-30 23:15:34 INFO5 check_wapp_levels: WAPP power levels are between 0.482 and 1.125 (still bad) 2008-Apr-30 23:15:36 INFO5 check_wapp_levels: WAPP power levels are between 0.574 and 1.123 (still bad) 2008-Apr-30 23:15:38 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.802 and 1.125 2008-Apr-30 23:15:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.796 < 0.8)! 2008-Apr-30 23:15:40 LOG4 check_wapp_levels: WAPP-1 power levels: 0.957 0.796 0.938 1.124 2008-Apr-30 23:15:40 LOG4 check_wapp_levels: WAPP-2 power levels: 1.082 0.997 1.065 1.123 2008-Apr-30 23:15:40 LOG4 check_wapp_levels: WAPP-3 power levels: 0.998 1.026 1.091 0.944 2008-Apr-30 23:15:40 LOG4 check_wapp_levels: WAPP-4 power levels: 1.121 1.102 0.976 0.980 2008-Apr-30 23:15:42 INFO5 check_wapp_levels: WAPP power levels are between 0.793 and 1.124 (still bad) 2008-Apr-30 23:15:44 INFO5 check_wapp_levels: WAPP power levels are between 0.787 and 1.123 (still bad) 2008-Apr-30 23:15:46 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.824 and 1.123 2008-Apr-30 23:15:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.599 < 0.8)! 2008-Apr-30 23:15:52 LOG4 check_wapp_levels: WAPP-1 power levels: 0.955 0.599 0.934 1.122 2008-Apr-30 23:15:52 LOG4 check_wapp_levels: WAPP-2 power levels: 1.083 0.996 1.063 1.124 2008-Apr-30 23:15:52 LOG4 check_wapp_levels: WAPP-3 power levels: 1.001 1.028 1.089 0.944 2008-Apr-30 23:15:52 LOG4 check_wapp_levels: WAPP-4 power levels: 1.119 1.102 0.974 0.981 2008-Apr-30 23:15:54 INFO5 check_wapp_levels: WAPP power levels are between 0.652 and 1.124 (still bad) 2008-Apr-30 23:15:56 INFO5 check_wapp_levels: WAPP power levels are between 0.604 and 1.124 (still bad) 2008-Apr-30 23:15:58 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.840 and 1.124 2008-Apr-30 23:16:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.736 < 0.8)! 2008-Apr-30 23:16:00 LOG4 check_wapp_levels: WAPP-1 power levels: 0.955 0.736 0.940 1.124 2008-Apr-30 23:16:00 LOG4 check_wapp_levels: WAPP-2 power levels: 1.081 0.996 1.065 1.124 2008-Apr-30 23:16:00 LOG4 check_wapp_levels: WAPP-3 power levels: 0.998 1.025 1.090 0.944 2008-Apr-30 23:16:00 LOG4 check_wapp_levels: WAPP-4 power levels: 1.120 1.101 0.976 0.980 2008-Apr-30 23:16:02 INFO5 check_wapp_levels: WAPP power levels are between 0.769 and 1.126 (still bad) 2008-Apr-30 23:16:04 INFO5 check_wapp_levels: WAPP power levels are between 0.567 and 1.129 (still bad) 2008-Apr-30 23:16:06 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.129 (still bad) 2008-Apr-30 23:16:08 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.849 and 1.130 2008-Apr-30 23:16:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.693 < 0.8)! 2008-Apr-30 23:16:16 LOG4 check_wapp_levels: WAPP-1 power levels: 0.953 0.693 0.950 1.134 2008-Apr-30 23:16:16 LOG4 check_wapp_levels: WAPP-2 power levels: 1.079 0.998 1.067 1.126 2008-Apr-30 23:16:16 LOG4 check_wapp_levels: WAPP-3 power levels: 0.998 1.026 1.089 0.944 2008-Apr-30 23:16:16 LOG4 check_wapp_levels: WAPP-4 power levels: 1.122 1.102 0.976 0.983 2008-Apr-30 23:16:18 INFO5 check_wapp_levels: WAPP power levels are between 0.778 and 1.133 (still bad) 2008-Apr-30 23:16:20 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.875 and 1.134 2008-Apr-30 23:16:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.798 < 0.8)! 2008-Apr-30 23:16:51 LOG4 check_wapp_levels: WAPP-1 power levels: 0.957 0.798 0.930 1.120 2008-Apr-30 23:16:51 LOG4 check_wapp_levels: WAPP-2 power levels: 1.082 0.997 1.066 1.124 2008-Apr-30 23:16:51 LOG4 check_wapp_levels: WAPP-3 power levels: 1.001 1.026 1.091 0.945 2008-Apr-30 23:16:51 LOG4 check_wapp_levels: WAPP-4 power levels: 1.122 1.103 0.976 0.982 2008-Apr-30 23:16:53 INFO5 check_wapp_levels: WAPP power levels are between 0.798 and 1.124 (still bad) 2008-Apr-30 23:16:55 INFO5 check_wapp_levels: WAPP power levels are between 0.796 and 1.124 (still bad) 2008-Apr-30 23:16:57 INFO5 check_wapp_levels: WAPP power levels are between 0.793 and 1.124 (still bad) 2008-Apr-30 23:16:59 INFO5 check_wapp_levels: WAPP power levels are between 0.794 and 1.124 (still bad) 2008-Apr-30 23:17:01 INFO5 check_wapp_levels: WAPP power levels are between 0.789 and 1.124 (still bad) 2008-Apr-30 23:17:03 INFO5 check_wapp_levels: WAPP power levels are between 0.745 and 1.124 (still bad) 2008-Apr-30 23:17:05 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.868 and 1.124 2008-Apr-30 23:17:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.693 < 0.8)! 2008-Apr-30 23:17:11 LOG4 check_wapp_levels: WAPP-1 power levels: 0.955 0.693 0.943 1.123 2008-Apr-30 23:17:11 LOG4 check_wapp_levels: WAPP-2 power levels: 1.083 0.998 1.067 1.125 2008-Apr-30 23:17:11 LOG4 check_wapp_levels: WAPP-3 power levels: 1.001 1.026 1.092 0.945 2008-Apr-30 23:17:11 LOG4 check_wapp_levels: WAPP-4 power levels: 1.121 1.101 0.975 0.979 2008-Apr-30 23:17:13 INFO5 check_wapp_levels: WAPP power levels are between 0.784 and 1.124 (still bad) 2008-Apr-30 23:17:15 INFO5 check_wapp_levels: WAPP power levels are between 0.781 and 1.124 (still bad) 2008-Apr-30 23:17:17 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.898 and 1.124 2008-Apr-30 23:17:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.748 < 0.8)! 2008-Apr-30 23:17:21 LOG4 check_wapp_levels: WAPP-1 power levels: 0.953 0.748 0.939 1.120 2008-Apr-30 23:17:21 LOG4 check_wapp_levels: WAPP-2 power levels: 1.085 0.999 1.066 1.125 2008-Apr-30 23:17:21 LOG4 check_wapp_levels: WAPP-3 power levels: 1.001 1.025 1.088 0.945 2008-Apr-30 23:17:21 LOG4 check_wapp_levels: WAPP-4 power levels: 1.121 1.102 0.975 0.982 2008-Apr-30 23:17:23 INFO5 check_wapp_levels: WAPP power levels are between 0.748 and 1.125 (still bad) 2008-Apr-30 23:17:25 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.853 and 1.125 2008-Apr-30 23:17:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.744 < 0.8)! 2008-Apr-30 23:17:27 LOG4 check_wapp_levels: WAPP-1 power levels: 0.958 0.744 0.940 1.124 2008-Apr-30 23:17:27 LOG4 check_wapp_levels: WAPP-2 power levels: 1.084 0.998 1.067 1.125 2008-Apr-30 23:17:27 LOG4 check_wapp_levels: WAPP-3 power levels: 1.001 1.025 1.094 0.946 2008-Apr-30 23:17:27 LOG4 check_wapp_levels: WAPP-4 power levels: 1.121 1.102 0.976 0.981 2008-Apr-30 23:17:29 INFO5 check_wapp_levels: WAPP power levels are between 0.792 and 1.124 (still bad) 2008-Apr-30 23:17:31 INFO5 check_wapp_levels: WAPP power levels are between 0.709 and 1.125 (still bad) 2008-Apr-30 23:17:33 INFO5 check_wapp_levels: WAPP power levels are between 0.701 and 1.125 (still bad) 2008-Apr-30 23:17:35 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.897 and 1.124 2008-Apr-30 23:17:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.653 < 0.8)! 2008-Apr-30 23:17:41 LOG4 check_wapp_levels: WAPP-1 power levels: 0.957 0.653 0.936 1.120 2008-Apr-30 23:17:41 LOG4 check_wapp_levels: WAPP-2 power levels: 1.079 0.999 1.065 1.124 2008-Apr-30 23:17:41 LOG4 check_wapp_levels: WAPP-3 power levels: 0.999 1.024 1.092 0.948 2008-Apr-30 23:17:41 LOG4 check_wapp_levels: WAPP-4 power levels: 1.121 1.102 0.976 0.982 2008-Apr-30 23:17:43 INFO5 check_wapp_levels: WAPP power levels are between 0.760 and 1.124 (still bad) 2008-Apr-30 23:17:45 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.879 and 1.125 2008-Apr-30 23:19:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.643 < 0.8)! 2008-Apr-30 23:19:06 LOG4 check_wapp_levels: WAPP-1 power levels: 0.957 0.643 0.934 1.122 2008-Apr-30 23:19:06 LOG4 check_wapp_levels: WAPP-2 power levels: 1.081 0.994 1.065 1.125 2008-Apr-30 23:19:06 LOG4 check_wapp_levels: WAPP-3 power levels: 0.996 1.022 1.092 0.945 2008-Apr-30 23:19:06 LOG4 check_wapp_levels: WAPP-4 power levels: 1.119 1.100 0.975 0.979 2008-Apr-30 23:19:08 INFO5 check_wapp_levels: WAPP power levels are between 0.672 and 1.125 (still bad) 2008-Apr-30 23:19:10 INFO5 check_wapp_levels: WAPP power levels are between 0.721 and 1.124 (still bad) 2008-Apr-30 23:19:12 INFO5 check_wapp_levels: WAPP power levels are between 0.704 and 1.125 (still bad) 2008-Apr-30 23:19:14 INFO5 check_wapp_levels: WAPP power levels are between 0.679 and 1.126 (still bad) 2008-Apr-30 23:19:16 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.805 and 1.126 2008-Apr-30 23:19:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.529 < 0.8)! 2008-Apr-30 23:19:22 LOG4 check_wapp_levels: WAPP-1 power levels: 0.954 0.529 0.937 1.119 2008-Apr-30 23:19:22 LOG4 check_wapp_levels: WAPP-2 power levels: 1.084 0.996 1.064 1.124 2008-Apr-30 23:19:22 LOG4 check_wapp_levels: WAPP-3 power levels: 0.994 1.021 1.092 0.946 2008-Apr-30 23:19:22 LOG4 check_wapp_levels: WAPP-4 power levels: 1.118 1.101 0.976 0.980 2008-Apr-30 23:19:24 INFO5 check_wapp_levels: WAPP power levels are between 0.788 and 1.125 (still bad) 2008-Apr-30 23:19:26 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.124 (still bad) 2008-Apr-30 23:19:28 INFO5 check_wapp_levels: WAPP power levels are between 0.657 and 1.124 (still bad) 2008-Apr-30 23:19:30 INFO5 check_wapp_levels: WAPP power levels are between 0.645 and 1.124 (still bad) 2008-Apr-30 23:19:32 INFO5 check_wapp_levels: WAPP power levels are between 0.762 and 1.124 (still bad) 2008-Apr-30 23:19:34 INFO5 check_wapp_levels: WAPP power levels are between 0.745 and 1.123 (still bad) 2008-Apr-30 23:19:36 INFO5 check_wapp_levels: WAPP power levels are between 0.742 and 1.124 (still bad) 2008-Apr-30 23:19:38 INFO5 check_wapp_levels: WAPP power levels are between 0.737 and 1.124 (still bad) 2008-Apr-30 23:19:41 INFO5 check_wapp_levels: WAPP power levels are between 0.734 and 1.124 (still bad) 2008-Apr-30 23:19:43 INFO5 check_wapp_levels: WAPP power levels are between 0.728 and 1.124 (still bad) 2008-Apr-30 23:19:45 INFO5 check_wapp_levels: WAPP power levels are between 0.727 and 1.124 (still bad) 2008-Apr-30 23:19:47 INFO5 check_wapp_levels: WAPP power levels are between 0.715 and 1.124 (still bad) 2008-Apr-30 23:19:49 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.843 and 1.124 2008-Apr-30 23:19:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.633 < 0.8)! 2008-Apr-30 23:19:51 LOG4 check_wapp_levels: WAPP-1 power levels: 0.950 0.633 0.935 1.120 2008-Apr-30 23:19:51 LOG4 check_wapp_levels: WAPP-2 power levels: 1.084 0.995 1.065 1.125 2008-Apr-30 23:19:51 LOG4 check_wapp_levels: WAPP-3 power levels: 0.994 1.020 1.090 0.943 2008-Apr-30 23:19:51 LOG4 check_wapp_levels: WAPP-4 power levels: 1.118 1.102 0.974 0.980 2008-Apr-30 23:19:53 INFO5 check_wapp_levels: WAPP power levels are between 0.630 and 1.125 (still bad) 2008-Apr-30 23:19:55 INFO5 check_wapp_levels: WAPP power levels are between 0.674 and 1.125 (still bad) 2008-Apr-30 23:19:57 INFO5 check_wapp_levels: WAPP power levels are between 0.795 and 1.124 (still bad) 2008-Apr-30 23:19:59 INFO5 check_wapp_levels: WAPP power levels are between 0.792 and 1.124 (still bad) 2008-Apr-30 23:20:01 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.854 and 1.124 2008-Apr-30 23:20:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.797 < 0.8)! 2008-Apr-30 23:20:13 LOG4 check_wapp_levels: WAPP-1 power levels: 0.956 0.797 0.937 1.119 2008-Apr-30 23:20:13 LOG4 check_wapp_levels: WAPP-2 power levels: 1.082 0.997 1.064 1.123 2008-Apr-30 23:20:13 LOG4 check_wapp_levels: WAPP-3 power levels: 0.996 1.022 1.092 0.943 2008-Apr-30 23:20:13 LOG4 check_wapp_levels: WAPP-4 power levels: 1.120 1.098 0.974 0.979 2008-Apr-30 23:20:15 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.802 and 1.123 2008-Apr-30 23:20:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.707 < 0.8)! 2008-Apr-30 23:20:17 LOG4 check_wapp_levels: WAPP-1 power levels: 0.954 0.707 0.938 1.120 2008-Apr-30 23:20:17 LOG4 check_wapp_levels: WAPP-2 power levels: 1.085 0.997 1.065 1.123 2008-Apr-30 23:20:17 LOG4 check_wapp_levels: WAPP-3 power levels: 0.995 1.021 1.093 0.944 2008-Apr-30 23:20:17 LOG4 check_wapp_levels: WAPP-4 power levels: 1.122 1.100 0.976 0.978 2008-Apr-30 23:20:19 INFO5 check_wapp_levels: WAPP power levels are between 0.696 and 1.124 (still bad) 2008-Apr-30 23:20:21 INFO5 check_wapp_levels: WAPP power levels are between 0.683 and 1.123 (still bad) 2008-Apr-30 23:20:23 INFO5 check_wapp_levels: WAPP power levels are between 0.697 and 1.123 (still bad) 2008-Apr-30 23:20:25 INFO5 check_wapp_levels: WAPP power levels are between 0.675 and 1.123 (still bad) 2008-Apr-30 23:20:27 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.819 and 1.123 2008-Apr-30 23:20:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.758 < 0.8)! 2008-Apr-30 23:20:31 LOG4 check_wapp_levels: WAPP-1 power levels: 0.953 0.758 0.937 1.121 2008-Apr-30 23:20:31 LOG4 check_wapp_levels: WAPP-2 power levels: 1.083 0.997 1.067 1.124 2008-Apr-30 23:20:31 LOG4 check_wapp_levels: WAPP-3 power levels: 0.997 1.022 1.096 0.944 2008-Apr-30 23:20:31 LOG4 check_wapp_levels: WAPP-4 power levels: 1.121 1.101 0.975 0.981 2008-Apr-30 23:20:33 INFO5 check_wapp_levels: WAPP power levels are between 0.784 and 1.124 (still bad) 2008-Apr-30 23:20:35 INFO5 check_wapp_levels: WAPP power levels are between 0.618 and 1.124 (still bad) 2008-Apr-30 23:20:37 INFO5 check_wapp_levels: WAPP power levels are between 0.775 and 1.125 (still bad) 2008-Apr-30 23:20:39 INFO5 check_wapp_levels: WAPP power levels are between 0.783 and 1.125 (still bad) 2008-Apr-30 23:20:41 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.882 and 1.126 2008-Apr-30 23:20:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.702 < 0.8)! 2008-Apr-30 23:20:43 LOG4 check_wapp_levels: WAPP-1 power levels: 0.957 0.702 0.942 1.121 2008-Apr-30 23:20:43 LOG4 check_wapp_levels: WAPP-2 power levels: 1.084 0.998 1.066 1.124 2008-Apr-30 23:20:43 LOG4 check_wapp_levels: WAPP-3 power levels: 0.999 1.023 1.094 0.944 2008-Apr-30 23:20:43 LOG4 check_wapp_levels: WAPP-4 power levels: 1.125 1.103 0.978 0.981 2008-Apr-30 23:20:45 INFO5 check_wapp_levels: WAPP power levels are between 0.544 and 1.126 (still bad) 2008-Apr-30 23:20:47 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.827 and 1.125 2008-Apr-30 23:20:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.676 < 0.8)! 2008-Apr-30 23:20:49 LOG4 check_wapp_levels: WAPP-1 power levels: 0.956 0.676 0.941 1.122 2008-Apr-30 23:20:49 LOG4 check_wapp_levels: WAPP-2 power levels: 1.084 0.998 1.066 1.124 2008-Apr-30 23:20:49 LOG4 check_wapp_levels: WAPP-3 power levels: 0.997 1.022 1.094 0.945 2008-Apr-30 23:20:49 LOG4 check_wapp_levels: WAPP-4 power levels: 1.124 1.103 0.978 0.981 2008-Apr-30 23:20:51 INFO5 check_wapp_levels: WAPP power levels are between 0.613 and 1.123 (still bad) 2008-Apr-30 23:20:53 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.858 and 1.125 2008-Apr-30 23:20:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.690 < 0.8)! 2008-Apr-30 23:20:55 LOG4 check_wapp_levels: WAPP-1 power levels: 0.954 0.690 0.942 1.125 2008-Apr-30 23:20:55 LOG4 check_wapp_levels: WAPP-2 power levels: 1.085 0.999 1.067 1.124 2008-Apr-30 23:20:55 LOG4 check_wapp_levels: WAPP-3 power levels: 0.999 1.022 1.100 0.949 2008-Apr-30 23:20:55 LOG4 check_wapp_levels: WAPP-4 power levels: 1.123 1.101 0.976 0.980 2008-Apr-30 23:20:57 INFO5 check_wapp_levels: WAPP power levels are between 0.657 and 1.126 (still bad) 2008-Apr-30 23:20:59 INFO5 check_wapp_levels: WAPP power levels are between 0.655 and 1.124 (still bad) 2008-Apr-30 23:21:01 INFO5 check_wapp_levels: WAPP power levels are between 0.756 and 1.123 (still bad) 2008-Apr-30 23:21:03 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.866 and 1.125 2008-Apr-30 23:21:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.747 < 0.8)! 2008-Apr-30 23:21:08 LOG4 check_wapp_levels: WAPP-1 power levels: 0.957 0.747 0.943 1.125 2008-Apr-30 23:21:08 LOG4 check_wapp_levels: WAPP-2 power levels: 1.083 0.999 1.067 1.124 2008-Apr-30 23:21:08 LOG4 check_wapp_levels: WAPP-3 power levels: 0.998 1.023 1.093 0.945 2008-Apr-30 23:21:08 LOG4 check_wapp_levels: WAPP-4 power levels: 1.123 1.101 0.977 0.980 2008-Apr-30 23:21:10 INFO5 check_wapp_levels: WAPP power levels are between 0.655 and 1.124 (still bad) 2008-Apr-30 23:21:12 INFO5 check_wapp_levels: WAPP power levels are between 0.723 and 1.123 (still bad) 2008-Apr-30 23:21:14 INFO5 check_wapp_levels: WAPP power levels are between 0.791 and 1.124 (still bad) 2008-Apr-30 23:21:16 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.884 and 1.124 2008-Apr-30 23:22:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.799 < 0.8)! 2008-Apr-30 23:22:20 LOG4 check_wapp_levels: WAPP-1 power levels: 0.952 0.799 0.927 1.115 2008-Apr-30 23:22:20 LOG4 check_wapp_levels: WAPP-2 power levels: 1.081 0.995 1.064 1.123 2008-Apr-30 23:22:20 LOG4 check_wapp_levels: WAPP-3 power levels: 0.995 1.023 1.091 0.944 2008-Apr-30 23:22:20 LOG4 check_wapp_levels: WAPP-4 power levels: 1.159 1.136 1.009 1.012 2008-Apr-30 23:22:22 INFO5 check_wapp_levels: WAPP power levels are between 0.798 and 1.157 (still bad) 2008-Apr-30 23:22:24 INFO5 check_wapp_levels: WAPP power levels are between 0.797 and 1.151 (still bad) 2008-Apr-30 23:22:26 INFO5 check_wapp_levels: WAPP power levels are between 0.799 and 1.144 (still bad) 2008-Apr-30 23:22:28 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.815 and 1.135 2008-Apr-30 23:22:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.591 < 0.8)! 2008-Apr-30 23:22:33 LOG4 check_wapp_levels: WAPP-1 power levels: 0.953 0.591 0.931 1.117 2008-Apr-30 23:22:33 LOG4 check_wapp_levels: WAPP-2 power levels: 1.083 0.995 1.065 1.123 2008-Apr-30 23:22:33 LOG4 check_wapp_levels: WAPP-3 power levels: 0.994 1.021 1.091 0.944 2008-Apr-30 23:22:33 LOG4 check_wapp_levels: WAPP-4 power levels: 1.122 1.102 0.977 0.980 2008-Apr-30 23:22:35 INFO5 check_wapp_levels: WAPP power levels are between 0.775 and 1.123 (still bad) 2008-Apr-30 23:22:37 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.895 and 1.124 2008-Apr-30 23:22:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.766 < 0.8)! 2008-Apr-30 23:22:47 LOG4 check_wapp_levels: WAPP-1 power levels: 0.953 0.766 0.939 1.125 2008-Apr-30 23:22:47 LOG4 check_wapp_levels: WAPP-2 power levels: 1.085 0.998 1.066 1.124 2008-Apr-30 23:22:47 LOG4 check_wapp_levels: WAPP-3 power levels: 0.995 1.021 1.089 0.943 2008-Apr-30 23:22:47 LOG4 check_wapp_levels: WAPP-4 power levels: 1.118 1.099 0.975 0.978 2008-Apr-30 23:22:49 INFO5 check_wapp_levels: WAPP power levels are between 0.752 and 1.123 (still bad) 2008-Apr-30 23:22:51 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.888 and 1.123 2008-Apr-30 23:23:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.676 < 0.8)! 2008-Apr-30 23:23:37 LOG4 check_wapp_levels: WAPP-1 power levels: 0.949 0.676 0.930 1.118 2008-Apr-30 23:23:37 LOG4 check_wapp_levels: WAPP-2 power levels: 1.084 0.995 1.063 1.124 2008-Apr-30 23:23:37 LOG4 check_wapp_levels: WAPP-3 power levels: 0.990 1.017 1.091 0.942 2008-Apr-30 23:23:37 LOG4 check_wapp_levels: WAPP-4 power levels: 1.117 1.101 0.973 0.979 2008-Apr-30 23:23:39 INFO5 check_wapp_levels: WAPP power levels are between 0.683 and 1.124 (still bad) 2008-Apr-30 23:23:41 INFO5 check_wapp_levels: WAPP power levels are between 0.679 and 1.124 (still bad) 2008-Apr-30 23:23:43 INFO5 check_wapp_levels: WAPP power levels are between 0.759 and 1.124 (still bad) 2008-Apr-30 23:23:45 INFO5 check_wapp_levels: WAPP power levels are between 0.778 and 1.123 (still bad) 2008-Apr-30 23:23:47 INFO5 check_wapp_levels: WAPP power levels are between 0.783 and 1.123 (still bad) 2008-Apr-30 23:23:49 INFO5 check_wapp_levels: WAPP power levels are between 0.764 and 1.123 (still bad) 2008-Apr-30 23:23:51 INFO5 check_wapp_levels: WAPP power levels are between 0.725 and 1.123 (still bad) 2008-Apr-30 23:23:53 INFO5 check_wapp_levels: WAPP power levels are between 0.718 and 1.123 (still bad) 2008-Apr-30 23:23:55 INFO5 check_wapp_levels: WAPP power levels are between 0.713 and 1.123 (still bad) 2008-Apr-30 23:23:57 INFO5 check_wapp_levels: WAPP power levels are between 0.709 and 1.123 (still bad) 2008-Apr-30 23:24:00 INFO5 check_wapp_levels: WAPP power levels are between 0.707 and 1.124 (still bad) 2008-Apr-30 23:24:02 INFO5 check_wapp_levels: WAPP power levels are between 0.704 and 1.124 (still bad) 2008-Apr-30 23:24:04 INFO5 check_wapp_levels: WAPP power levels are between 0.710 and 1.123 (still bad) 2008-Apr-30 23:24:06 INFO5 check_wapp_levels: WAPP power levels are between 0.704 and 1.123 (still bad) 2008-Apr-30 23:24:08 INFO5 check_wapp_levels: WAPP power levels are between 0.705 and 1.124 (still bad) 2008-Apr-30 23:24:10 INFO5 check_wapp_levels: WAPP power levels are between 0.701 and 1.124 (still bad) 2008-Apr-30 23:24:12 INFO5 check_wapp_levels: WAPP power levels are between 0.705 and 1.123 (still bad) 2008-Apr-30 23:24:14 INFO5 check_wapp_levels: WAPP power levels are between 0.701 and 1.124 (still bad) 2008-Apr-30 23:24:16 INFO5 check_wapp_levels: WAPP power levels are between 0.699 and 1.123 (still bad) 2008-Apr-30 23:24:18 INFO5 check_wapp_levels: WAPP power levels are between 0.697 and 1.123 (still bad) 2008-Apr-30 23:24:20 INFO5 check_wapp_levels: WAPP power levels are between 0.705 and 1.123 (still bad) 2008-Apr-30 23:24:22 INFO5 check_wapp_levels: WAPP power levels are between 0.702 and 1.122 (still bad) 2008-Apr-30 23:24:24 INFO5 check_wapp_levels: WAPP power levels are between 0.700 and 1.123 (still bad) 2008-Apr-30 23:24:26 INFO5 check_wapp_levels: WAPP power levels are between 0.725 and 1.124 (still bad) 2008-Apr-30 23:24:28 INFO5 check_wapp_levels: WAPP power levels are between 0.718 and 1.124 (still bad) 2008-Apr-30 23:24:30 INFO5 check_wapp_levels: WAPP power levels are between 0.693 and 1.124 (still bad) 2008-Apr-30 23:24:32 INFO5 check_wapp_levels: WAPP power levels are between 0.655 and 1.125 (still bad) 2008-Apr-30 23:24:34 INFO5 check_wapp_levels: WAPP power levels are between 0.724 and 1.124 (still bad) 2008-Apr-30 23:24:36 INFO5 check_wapp_levels: WAPP power levels are between 0.718 and 1.124 (still bad) 2008-Apr-30 23:24:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.708 < 0.8)! 2008-Apr-30 23:24:38 LOG4 check_wapp_levels: WAPP-1 power levels: 0.952 0.708 0.929 1.114 2008-Apr-30 23:24:38 LOG4 check_wapp_levels: WAPP-2 power levels: 1.082 0.994 1.064 1.125 2008-Apr-30 23:24:38 LOG4 check_wapp_levels: WAPP-3 power levels: 0.995 1.019 1.089 0.943 2008-Apr-30 23:24:38 LOG4 check_wapp_levels: WAPP-4 power levels: 1.118 1.097 0.974 0.978 2008-Apr-30 23:24:40 INFO5 check_wapp_levels: WAPP power levels are between 0.720 and 1.125 (still bad) 2008-Apr-30 23:24:42 INFO5 check_wapp_levels: WAPP power level