2008-Apr-29 18:16:18 BEGIN executive: CIMA executive starting ... 2008-Apr-29 18:16:19 NOTE executive: STARTING NEW CIMA SESSION 2008-Apr-29 18:16:19 INFO1 executive: Using CIMA version 2.3.xx 'unusable' from 2008-04-29 17:36 2008-Apr-29 18:16:19 INFO4 executive: This is an ON-LINE session 2008-Apr-29 18:16:19 INFO4 executive: This is a REMOTE session 2008-Apr-29 18:16:19 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2008-Apr-29 18:16:19 INFO1 executive: CIMA session for project 'a2048' in 'line' mode for 'Karen O'Neil' 2008-Apr-29 18:16:19 INFO2 executive: Logging to '/share/obs4/usr/a2048/a2048.cimalog_20080429' 2008-Apr-29 18:16:19 LOG2 log_preferences: Currently applied preferences: 2008-Apr-29 18:16:19 LOG2 log_preferences: prefs(dailylog) = daily 2008-Apr-29 18:16:19 LOG2 log_preferences: prefs(offlinelog) = skip 2008-Apr-29 18:16:19 LOG2 log_preferences: prefs(datawindow) = ignore 2008-Apr-29 18:16:19 LOG2 log_preferences: prefs(limitwarning) = enabled 2008-Apr-29 18:16:19 LOG2 log_preferences: prefs(wappfailure) = abort 2008-Apr-29 18:16:19 LOG2 log_preferences: prefs(helpstyle) = stay-open 2008-Apr-29 18:16:19 LOG2 log_preferences: prefs(logcolours) = full 2008-Apr-29 18:16:19 LOG2 log_preferences: prefs(displaylevel) = INFO3 2008-Apr-29 18:16:19 LOG2 log_preferences: prefs(loglevel) = LOG5 2008-Apr-29 18:16:19 LOG2 log_preferences: prefs(displayformat) = short 2008-Apr-29 18:16:19 LOG2 log_preferences: prefs(logformat) = new 2008-Apr-29 18:16:19 LOG2 log_preferences: prefs(fontsize) = 4 2008-Apr-29 18:16:19 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2008-Apr-29 18:16:19 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2048 2008-Apr-29 18:16:19 ALERT executive: CIMA executive ready 2008-Apr-29 18:16:22 NOTE frontend: CIMA frontend ready 2008-Apr-29 18:16:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:16:22 LOG4 got_cormsg: From DATATAKING: setup 2008-Apr-29 18:16:27 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2008-Apr-29 18:16:27 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2008-Apr-29 18:16:27 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2008-Apr-29 18:16:27 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2008-Apr-29 18:16:27 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Apr-29 18:16:27 NOTE select_receiver: Starting to select receiver ALFA 2008-Apr-29 18:16:27 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Apr-29 18:16:28 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Apr-29 18:16:28 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Apr-29 18:16:28 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Apr-29 18:16:28 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Apr-29 18:16:28 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Apr-29 18:16:28 DONE finish_task: DONE finished selecting: receiver ALFA 2008-Apr-29 18:16:28 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-29 18:16:28 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Apr-29 18:16:28 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Apr-29 18:16:29 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0xd 2008-Apr-29 18:16:29 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0xd' 2008-Apr-29 18:16:29 LOG4 got_cormsg: From DATATAKING: vw% io 2008-Apr-29 18:16:29 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2008-Apr-29 18:16:29 LOG4 got_cormsg: From DATATAKING: 2008-Apr-29 18:16:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:16:29 LOG4 got_cormsg: From DATATAKING: tape stat 2008-Apr-29 18:16:29 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2008-Apr-29 18:16:29 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2008-Apr-29 18:16:29 LOG4 got_cormsg: From DATATAKING: vw% connectall 2008-Apr-29 18:16:29 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2008-Apr-29 18:16:29 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2008-Apr-29 18:16:29 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2008-Apr-29 18:16:29 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2008-Apr-29 18:16:29 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2008-Apr-29 18:16:29 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2008-Apr-29 18:16:29 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2008-Apr-29 18:16:29 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2008-Apr-29 18:16:29 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2048 2008-Apr-29 18:16:29 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Apr-29 18:16:29 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Apr-29 18:16:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:16:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:16:34 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2008-Apr-29 18:16:34 LOG4 exec_msg: From OBSERVER: restart_wapp 2008-Apr-29 18:16:34 LOG5 restart_wapp: Calling 'restart_wapp' 2008-Apr-29 18:16:34 BEGIN begin_task: Starting task 'restarting the WAPPs' 2008-Apr-29 18:16:34 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Apr-29 18:16:34 NOTE restart_wapp: Restarting all WAPPs 2008-Apr-29 18:16:34 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2008-Apr-29 18:16:34 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2008-Apr-29 18:16:34 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Apr-29 18:16:34 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Apr-29 18:16:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:16:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:16:37 ALERT WAPP=1-wappcon: WAPP1 restarting 2008-Apr-29 18:16:37 ALERT WAPP=2-wappcon: WAPP2 restarting 2008-Apr-29 18:16:37 ALERT WAPP=3-wappcon: WAPP3 restarting 2008-Apr-29 18:16:37 ALERT WAPP=4-wappcon: WAPP4 restarting 2008-Apr-29 18:17:30 INFO1 CIMA-run_command_file: Transferring command file 'command_galfasrc.cmd ' to executive ... 2008-Apr-29 18:17:30 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 5 {LOAD togs_ages.conf} 2008-Apr-29 18:17:30 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 6 {CATALOG togs_ages.cat} 2008-Apr-29 18:17:30 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {GOTO galfasrc} 2008-Apr-29 18:17:30 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {ALFAANGLE 19} 2008-Apr-29 18:17:30 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {WAITTRACK} 2008-Apr-29 18:17:30 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 13 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2008-Apr-29 18:17:30 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-Apr-29 18:17:30 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc.cmd 1 1 6 2008-Apr-29 18:17:30 LOG4 run_command_file: Calling 'run_command_file command_galfasrc.cmd 1 1 6' 2008-Apr-29 18:17:30 BEGIN begin_task: Starting task 'running command file 'command_galfasrc.cmd'' 2008-Apr-29 18:17:30 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Apr-29 18:17:30 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc.cmd' ...} 2008-Apr-29 18:17:30 NOTE run_command_file: Starting execution of command file 'command_galfasrc.cmd' from line 1 2008-Apr-29 18:17:30 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_ages.conf' 2008-Apr-29 18:17:30 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2008-Apr-29 18:17:30 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-29 18:17:30 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2008-Apr-29 18:17:30 NOTE CIMA-load_config_file: Loading configuration file 'togs_ages.conf' 2008-Apr-29 18:17:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Apr-29 18:17:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Apr-29 18:17:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Apr-29 18:17:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Apr-29 18:17:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Apr-29 18:17:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2008-Apr-29 18:17:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Apr-29 18:17:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1381.2" 2008-Apr-29 18:17:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1381.2" 2008-Apr-29 18:17:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1381.2" 2008-Apr-29 18:17:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1381.2" 2008-Apr-29 18:17:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1381.2" 2008-Apr-29 18:17:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1381.2" 2008-Apr-29 18:17:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1381.2" 2008-Apr-29 18:17:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1381.2" 2008-Apr-29 18:17:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1381.2" 2008-Apr-29 18:17:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Apr-29 18:17:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Apr-29 18:17:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Apr-29 18:17:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Apr-29 18:17:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Apr-29 18:17:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Apr-29 18:17:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Apr-29 18:17:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Apr-29 18:17:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Apr-29 18:17:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Apr-29 18:17:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Apr-29 18:17:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Apr-29 18:17:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Apr-29 18:17:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2008-Apr-29 18:17:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Apr-29 18:17:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Apr-29 18:17:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Apr-29 18:17:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Apr-29 18:17:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Apr-29 18:17:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Apr-29 18:17:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Apr-29 18:17:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Apr-29 18:17:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Apr-29 18:17:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1631.200000" 2008-Apr-29 18:17:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Apr-29 18:17:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Apr-29 18:17:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Apr-29 18:17:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Apr-29 18:17:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Apr-29 18:17:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Apr-29 18:17:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Apr-29 18:17:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Apr-29 18:17:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Apr-29 18:17:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Apr-29 18:17:32 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Apr-29 18:17:32 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Apr-29 18:17:32 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Apr-29 18:17:32 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Apr-29 18:17:32 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Apr-29 18:17:32 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Apr-29 18:17:32 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Apr-29 18:17:32 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Apr-29 18:17:32 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Apr-29 18:17:32 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Apr-29 18:17:32 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Apr-29 18:17:32 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Apr-29 18:17:32 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Apr-29 18:17:32 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Apr-29 18:17:32 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Apr-29 18:17:32 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Apr-29 18:17:32 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Apr-29 18:17:34 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Apr-29 18:17:34 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Apr-29 18:17:34 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Apr-29 18:17:34 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Apr-29 18:17:34 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Apr-29 18:17:34 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Apr-29 18:17:34 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Apr-29 18:17:34 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Apr-29 18:17:34 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Apr-29 18:17:34 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Apr-29 18:17:34 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Apr-29 18:17:34 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Apr-29 18:17:34 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-29 18:17:34 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Apr-29 18:17:34 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Apr-29 18:17:34 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Apr-29 18:17:34 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Apr-29 18:17:34 INFO1 config_iflo: Selecting receiver ALFA 2008-Apr-29 18:17:34 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2008-Apr-29 18:17:34 LOG1 select_receiver: Calling 'select_receiver alfa no no no' 2008-Apr-29 18:17:34 START begin_task: Starting task 'selecting receiver ALFA' 2008-Apr-29 18:17:34 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Apr-29 18:17:34 NOTE select_receiver: Starting to select receiver ALFA 2008-Apr-29 18:17:34 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Apr-29 18:17:34 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Apr-29 18:17:34 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Apr-29 18:17:34 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Apr-29 18:17:34 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Apr-29 18:17:34 LOG5 finish_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Apr-29 18:17:34 INFO2 finish_task: DONE finished selecting: receiver ALFA 2008-Apr-29 18:17:34 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 18:17:34 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Apr-29 18:17:34 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Apr-29 18:17:34 START begin_task: Starting task 'waiting for receiver ALFA' 2008-Apr-29 18:17:34 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2008-Apr-29 18:17:34 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2008-Apr-29 18:17:34 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2008-Apr-29 18:17:34 INFO1 config_iflo: Configuring rest of the IF/LO path 2008-Apr-29 18:17:34 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2008-Apr-29 18:17:34 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-29 18:17:34 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-29 18:17:34 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-29 18:17:34 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2008-Apr-29 18:17:34 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-29 18:17:34 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-29 18:17:34 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2008-Apr-29 18:17:34 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-29 18:17:34 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-29 18:17:34 LOG3 vw_send: To DATATAKING: alfafb 1 2008-Apr-29 18:17:34 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2008-Apr-29 18:17:35 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Apr-29 18:17:35 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Apr-29 18:17:35 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2008-Apr-29 18:17:35 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2008-Apr-29 18:17:35 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2008-Apr-29 18:17:35 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2008-Apr-29 18:17:35 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2008-Apr-29 18:17:35 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2008-Apr-29 18:17:35 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Apr-29 18:17:35 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Apr-29 18:17:35 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Apr-29 18:17:35 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Apr-29 18:17:35 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Apr-29 18:17:35 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2008-Apr-29 18:17:35 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2008-Apr-29 18:17:35 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2008-Apr-29 18:17:35 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2008-Apr-29 18:17:35 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Apr-29 18:17:35 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2008-Apr-29 18:17:35 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Apr-29 18:17:35 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Apr-29 18:17:35 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 18:17:35 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Apr-29 18:17:35 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2008-Apr-29 18:17:35 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Apr-29 18:17:35 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2008-Apr-29 18:17:35 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2008-Apr-29 18:17:35 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Apr-29 18:17:35 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 18:17:35 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Apr-29 18:17:35 LOG5 begin_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2008-Apr-29 18:17:35 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Apr-29 18:17:35 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Apr-29 18:17:35 LOG4 got_cormsg: From DATATAKING: alfafb 1 2008-Apr-29 18:17:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2008-Apr-29 18:17:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2008-Apr-29 18:17:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2008-Apr-29 18:17:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2008-Apr-29 18:17:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2008-Apr-29 18:17:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2008-Apr-29 18:17:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2008-Apr-29 18:17:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2008-Apr-29 18:17:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2008-Apr-29 18:17:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2008-Apr-29 18:17:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2008-Apr-29 18:17:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Apr-29 18:17:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2008-Apr-29 18:17:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Apr-29 18:17:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 18:17:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Apr-29 18:17:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2008-Apr-29 18:17:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2008-Apr-29 18:17:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2008-Apr-29 18:17:35 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 18:17:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:17:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:17:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:17:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:17:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:17:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:17:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:17:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:17:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:17:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:17:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:17:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:17:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:17:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:17:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:17:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:17:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:17:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:17:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:17:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:17:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:17:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:17:50 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-29 18:17:50 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Apr-29 18:17:50 LOG5 end_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2008-Apr-29 18:17:50 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Apr-29 18:17:50 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Apr-29 18:17:50 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Apr-29 18:17:50 DONE finish_task: DONE finished configuration: IF/LO path 2008-Apr-29 18:17:50 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-29 18:17:50 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Apr-29 18:17:50 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Apr-29 18:17:50 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Apr-29 18:17:50 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Apr-29 18:17:51 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Apr-29 18:17:51 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Apr-29 18:17:51 START begin_task: Starting task 'selecting calibration port' 2008-Apr-29 18:17:51 LOG5 begin_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-Apr-29 18:17:51 LOG3 vw_send: To DATATAKING: calport 3 2008-Apr-29 18:17:51 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Apr-29 18:17:51 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 18:17:51 START begin_task: Starting task 'waiting on calport' 2008-Apr-29 18:17:51 LOG5 begin_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2008-Apr-29 18:17:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:17:51 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Apr-29 18:17:51 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 18:17:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:17:51 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-29 18:17:51 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Apr-29 18:17:51 LOG5 end_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2008-Apr-29 18:17:51 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Apr-29 18:17:51 STOP finish_task: Finishing task 'selecting calibration port' 2008-Apr-29 18:17:51 LOG5 finish_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-Apr-29 18:17:51 INFO2 finish_task: DONE finished configuring: calibration port 2008-Apr-29 18:17:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 18:17:51 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Apr-29 18:17:51 LOG5 end_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-Apr-29 18:17:51 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Apr-29 18:17:51 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Apr-29 18:17:51 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Apr-29 18:17:51 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Apr-29 18:17:51 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Apr-29 18:17:51 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Apr-29 18:17:51 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Apr-29 18:17:51 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Apr-29 18:17:51 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Karen O'Neil 2008-Apr-29 18:17:51 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Karen O'Neil 2008-Apr-29 18:17:51 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Karen O'Neil 2008-Apr-29 18:17:51 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Karen O'Neil 2008-Apr-29 18:17:51 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Apr-29 18:17:51 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Apr-29 18:17:51 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-29 18:17:51 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2008-Apr-29 18:17:51 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-29 18:17:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:17:51 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-29 18:17:51 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-29 18:17:51 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-29 18:17:51 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2008-Apr-29 18:17:51 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Karen O'Neil 2008-Apr-29 18:17:51 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Karen O'Neil 2008-Apr-29 18:17:51 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Karen O'Neil 2008-Apr-29 18:17:51 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Karen O'Neil 2008-Apr-29 18:17:51 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Apr-29 18:17:51 LOG5 finish_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Apr-29 18:17:51 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Apr-29 18:17:51 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-29 18:17:52 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Apr-29 18:17:52 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Apr-29 18:17:52 COMMAND run_command_line: EXECUTING command 6: 'CATALOG togs_ages.cat' 2008-Apr-29 18:17:52 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/togs_ages.cat' 2008-Apr-29 18:17:52 COMMAND run_command_line: EXECUTING command 7: 'GOTO galfasrc' 2008-Apr-29 18:17:52 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2048/togs_ages.cat galfasrc nooffset nowait' 2008-Apr-29 18:17:52 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2008-Apr-29 18:17:52 LOG5 begin_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2008-Apr-29 18:17:52 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2008-Apr-29 18:17:52 LOG3 track_source: Calling 'track_source galfasrc 094300.0 +215300 J 0.0 0.0 main small /share/obs4/usr/a2048/togs_ages.cat 0 Topocentric velocity(optical)' 2008-Apr-29 18:17:52 START begin_task: Starting task 'sending tracking commands' 2008-Apr-29 18:17:52 LOG5 begin_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2008-Apr-29 18:17:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2008-Apr-29 18:17:52 INFO1 track_source: Starting to track galfasrc 2008-Apr-29 18:17:52 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2008-Apr-29 18:17:52 LOG3 vw_send: To DATATAKING: set ra 094300.0 2008-Apr-29 18:17:52 LOG3 vw_send: To DATATAKING: set dec +215300 2008-Apr-29 18:17:52 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-29 18:17:52 LOG3 vw_send: To DATATAKING: pnt tr 094300.0 +215300 -CJ 2008-Apr-29 18:17:52 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Apr-29 18:17:52 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-29 18:17:52 LOG5 finish_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2008-Apr-29 18:17:52 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-29 18:17:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 18:17:52 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-29 18:17:52 LOG5 end_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2008-Apr-29 18:17:52 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2008-Apr-29 18:17:52 LOG5 finish_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2008-Apr-29 18:17:52 DONE finish_task: DONE finished tracking: source 'galfasrc' 2008-Apr-29 18:17:52 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-29 18:17:52 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2008-Apr-29 18:17:52 LOG5 end_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2008-Apr-29 18:17:52 COMMAND run_command_line: EXECUTING command 8: 'ALFAANGLE 19' 2008-Apr-29 18:17:52 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2008-Apr-29 18:17:52 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Apr-29 18:17:52 LOG5 begin_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2008-Apr-29 18:17:52 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Apr-29 18:17:52 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Apr-29 18:17:52 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-Apr-29 18:17:52 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-29 18:17:52 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-29 18:17:52 LOG5 begin_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2008-Apr-29 18:17:52 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Karen O'Neil' 2008-Apr-29 18:17:52 NOTE WAPPDATA-new_file: New FITS file: wapp.20080429.a2048.0000.fits 2008-Apr-29 18:17:52 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2008-Apr-29 18:17:52 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Apr-29 18:17:52 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Apr-29 18:17:52 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20080429.a2048.0000.fits} 2008-Apr-29 18:17:52 LOG4 got_cormsg: From DATATAKING: set ra 094300.0 2008-Apr-29 18:17:52 LOG4 got_cormsg: From DATATAKING: set dec +215300 2008-Apr-29 18:17:52 LOG4 got_cormsg: From DATATAKING: vw% 094300.0 2008-Apr-29 18:17:52 LOG4 got_cormsg: From DATATAKING: vw% +215300 2008-Apr-29 18:17:52 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:17:52 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-29 18:17:52 LOG4 got_cormsg: From DATATAKING: pnt tr 094300.0 +215300 -CJ 2008-Apr-29 18:17:52 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Apr-29 18:17:52 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-29 18:17:52 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:17:53 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Karen O'Neil' 2008-Apr-29 18:17:53 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-29 18:17:53 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Apr-29 18:17:53 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-29 18:17:53 LOG5 end_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2008-Apr-29 18:17:53 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-29 18:17:53 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Apr-29 18:17:53 LOG5 finish_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2008-Apr-29 18:17:53 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Apr-29 18:17:53 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-29 18:17:53 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Apr-29 18:17:53 LOG5 end_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2008-Apr-29 18:17:53 COMMAND run_command_line: EXECUTING command 9: 'WAITTRACK' 2008-Apr-29 18:17:53 BEGIN begin_task: Starting task 'waiting on telescope' 2008-Apr-29 18:17:53 LOG5 begin_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2008-Apr-29 18:17:53 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-29 18:17:53 LOG3 waittrk: Start waittrk 5 2008-Apr-29 18:17:53 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-29 18:17:53 LOG5 begin_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2008-Apr-29 18:17:58 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-29 18:17:58 LOG5 end_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2008-Apr-29 18:17:58 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-29 18:17:58 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2008-Apr-29 18:21:21 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-29 18:21:21 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2008-Apr-29 18:21:21 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-29 18:21:22 INFO2 waittrk: Now tracking galfasrc 2008-Apr-29 18:21:22 LOG4 waittrk: Current telescope position: Az = 255.33 ZA = 18.23 2008-Apr-29 18:21:22 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-29 18:21:22 LOG5 finish_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2008-Apr-29 18:21:22 DONE finish_task: DONE finished waiting: telescope on source 2008-Apr-29 18:21:22 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-29 18:21:22 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-29 18:21:22 LOG5 end_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2008-Apr-29 18:21:22 COMMAND run_command_line: EXECUTING command 13: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2008-Apr-29 18:21:22 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2008-Apr-29 18:21:38 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-29 18:21:38 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first 0 {1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2008-Apr-29 18:21:38 BEGIN begin_task: Starting task 'smart frequency switching' 2008-Apr-29 18:21:38 LOG5 begin_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2008-Apr-29 18:21:38 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'galfasrc' 2008-Apr-29 18:21:38 INFO1 smartfreq: Starting pattern: Smart frequency switching 2008-Apr-29 18:21:38 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2008-Apr-29 18:21:38 START begin_task: Starting task 'selecting calibration type' 2008-Apr-29 18:21:38 LOG5 begin_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2008-Apr-29 18:21:38 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-29 18:21:38 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-29 18:21:38 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 18:21:38 START begin_task: Starting task 'waiting on setcal' 2008-Apr-29 18:21:38 LOG5 begin_task: Level: (4) ID = <10022> Status = 0 0 0 0 ok 2008-Apr-29 18:21:38 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-29 18:21:38 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 18:21:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:21:38 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-29 18:21:38 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-29 18:21:38 LOG5 end_task: Level: (4) ID = <10022> Status = 0 0 0 0 ok 2008-Apr-29 18:21:38 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-29 18:21:38 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-29 18:21:38 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-29 18:21:38 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-29 18:21:38 LOG5 begin_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2008-Apr-29 18:21:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:21:38 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-29 18:21:38 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-29 18:21:38 LOG5 end_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2008-Apr-29 18:21:38 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-29 18:21:38 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-29 18:21:38 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-29 18:21:38 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-29 18:21:38 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-29 18:21:38 LOG5 begin_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2008-Apr-29 18:21:38 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-29 18:21:38 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-29 18:21:38 LOG5 end_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2008-Apr-29 18:21:38 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-29 18:21:38 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-29 18:21:38 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-29 18:21:38 LOG5 finish_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2008-Apr-29 18:21:38 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-29 18:21:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 18:21:39 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-29 18:21:39 LOG5 end_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2008-Apr-29 18:21:39 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Karen O'Neil 2008-Apr-29 18:21:39 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Karen O'Neil 2008-Apr-29 18:21:39 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Karen O'Neil 2008-Apr-29 18:21:39 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Karen O'Neil 2008-Apr-29 18:21:39 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20080429.a2048.0000.fits' is empty! 2008-Apr-29 18:21:39 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2008-Apr-29 18:21:39 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-29 18:21:39 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2008-Apr-29 18:21:39 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-29 18:21:39 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-29 18:21:39 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-29 18:21:39 LOG5 begin_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2008-Apr-29 18:21:39 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-29 18:21:39 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-29 18:21:39 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-29 18:21:39 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-29 18:21:39 LOG5 end_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2008-Apr-29 18:21:39 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2008-Apr-29 18:21:39 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-29 18:21:39 LOG5 begin_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-Apr-29 18:21:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-29 18:21:39 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-29 18:21:39 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-29 18:21:39 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-29 18:21:39 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 18:21:39 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-29 18:21:39 LOG5 begin_task: Level: (4) ID = <10027> Status = 0 0 0 0 ok 2008-Apr-29 18:21:39 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-29 18:21:39 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 18:21:39 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Karen O'Neil' 2008-Apr-29 18:21:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:21:42 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-29 18:21:42 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-29 18:21:42 LOG5 end_task: Level: (4) ID = <10027> Status = 0 0 0 0 ok 2008-Apr-29 18:21:42 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-29 18:21:42 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-29 18:21:42 LOG5 begin_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2008-Apr-29 18:21:42 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-29 18:21:42 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-29 18:21:42 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-29 18:21:42 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-29 18:21:42 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-29 18:21:42 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-29 18:21:42 LOG5 begin_task: Level: (5) ID = <10029> Status = 0 0 0 0 ok 2008-Apr-29 18:21:42 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-29 18:21:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:21:42 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 1 dB --- beam 1: 8 7 dB 2008-Apr-29 18:21:42 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 6 dB 2008-Apr-29 18:21:42 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 4 dB 2008-Apr-29 18:21:42 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 3 3 dB 2008-Apr-29 18:21:42 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-29 18:21:42 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-29 18:21:42 LOG5 end_task: Level: (5) ID = <10029> Status = 0 0 0 0 ok 2008-Apr-29 18:21:42 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.952 1.017 ALFA beam 1: 0.899 0.911 2008-Apr-29 18:21:42 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.045 1.011 ALFA beam 3: 1.022 0.915 2008-Apr-29 18:21:42 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.987 1.033 ALFA beam 5: 1.039 0.931 2008-Apr-29 18:21:42 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.002 1.043 ALFA beam 7: 0.880 0.930 2008-Apr-29 18:21:42 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-29 18:21:42 LOG5 finish_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2008-Apr-29 18:21:42 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-29 18:21:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 18:21:43 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-29 18:21:43 LOG5 end_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2008-Apr-29 18:21:43 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-29 18:21:43 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-29 18:21:43 LOG5 finish_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-Apr-29 18:21:43 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-29 18:21:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 18:21:43 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-29 18:21:43 LOG5 end_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-Apr-29 18:21:43 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2008-Apr-29 18:21:43 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2008-Apr-29 18:21:43 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2008-Apr-29 18:21:43 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-29 18:21:43 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.33064 J 2008-Apr-29 18:21:43 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.6 2008-Apr-29 18:21:43 LOG2 antvel: Parameters to Doppler: Topocentric 80502 2008 120 0.0 2008-Apr-29 18:21:43 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-29 18:21:43 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2008-Apr-29 18:21:43 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2008-Apr-29 18:21:43 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-29 18:21:43 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-29 18:21:43 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Apr-29 18:21:43 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 18:21:43 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-29 18:21:43 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-29 18:21:43 LOG5 begin_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2008-Apr-29 18:21:43 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-29 18:21:43 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.460684 2008.3306367404364 18.999933 2008-Apr-29 18:21:43 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666663 21.883333333333333 2008-Apr-29 18:21:43 LOG4 log_alfabeam: ALFABEAM 1 9.709381349988115 21.852012988722308 2008-Apr-29 18:21:43 LOG4 log_alfabeam: ALFABEAM 2 9.715015742716435 21.793149228145960 2008-Apr-29 18:21:43 LOG4 log_alfabeam: ALFABEAM 3 9.722306883398195 21.824105134443073 2008-Apr-29 18:21:43 LOG4 log_alfabeam: ALFABEAM 4 9.723952150850847 21.914772343442785 2008-Apr-29 18:21:43 LOG4 log_alfabeam: ALFABEAM 5 9.718288220414264 21.973777279016513 2008-Apr-29 18:21:43 LOG4 log_alfabeam: ALFABEAM 6 9.711008700617235 21.941974008095467 2008-Apr-29 18:21:43 INFO2 take_spectra: Starting WAPP+GALFA scan: 812000084 2008-Apr-29 18:21:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-29 18:21:43 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-29 18:21:43 LOG5 begin_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2008-Apr-29 18:21:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-29 18:21:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Apr-29 18:21:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 18:21:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:21:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:21:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80504.00 2008-Apr-29 18:21:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-29 18:21:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:21:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:21:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:21:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:21:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:21:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:21:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:21:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:21:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-29 18:21:54 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-29 18:21:54 LOG5 end_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2008-Apr-29 18:21:54 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-29 18:21:54 LOG5 end_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2008-Apr-29 18:21:54 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2008-Apr-29 18:21:54 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2008-Apr-29 18:21:54 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2008-Apr-29 18:21:54 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-29 18:21:54 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.33064 J 2008-Apr-29 18:21:54 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.6 2008-Apr-29 18:21:54 LOG2 antvel: Parameters to Doppler: Topocentric 80514 2008 120 0.0 2008-Apr-29 18:21:54 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-29 18:21:54 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2008-Apr-29 18:21:54 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2008-Apr-29 18:21:54 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-29 18:21:54 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-29 18:21:54 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Apr-29 18:21:54 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 18:21:54 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-29 18:21:54 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-29 18:21:54 LOG5 begin_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2008-Apr-29 18:21:54 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-29 18:21:54 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.464026 2008.3306371206936 18.999933 2008-Apr-29 18:21:54 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666663 21.883333333333329 2008-Apr-29 18:21:54 LOG4 log_alfabeam: ALFABEAM 1 9.709382832968624 21.851946370290552 2008-Apr-29 18:21:54 LOG4 log_alfabeam: ALFABEAM 2 9.715019971237668 21.793134451690467 2008-Apr-29 18:21:54 LOG4 log_alfabeam: ALFABEAM 3 9.722309670636099 21.824156187505469 2008-Apr-29 18:21:54 LOG4 log_alfabeam: ALFABEAM 4 9.723950656694697 21.914839483730294 2008-Apr-29 18:21:54 LOG4 log_alfabeam: ALFABEAM 5 9.718283888525312 21.973792503758897 2008-Apr-29 18:21:54 LOG4 log_alfabeam: ALFABEAM 6 9.711005905355695 21.941921307279305 2008-Apr-29 18:21:54 INFO2 take_spectra: Starting WAPP+GALFA scan: 812000085 2008-Apr-29 18:21:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-29 18:21:55 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-29 18:21:55 LOG5 begin_task: Level: (4) ID = <10033> Status = 0 0 0 0 ok 2008-Apr-29 18:21:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-29 18:21:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Apr-29 18:21:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 18:21:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:21:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:21:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80516.00 2008-Apr-29 18:21:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-29 18:21:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:21:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:21:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:21:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:21:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:21:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:21:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:21:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:22:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-29 18:22:06 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-29 18:22:06 LOG5 end_task: Level: (4) ID = <10033> Status = 0 0 0 0 ok 2008-Apr-29 18:22:06 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-29 18:22:06 LOG5 end_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2008-Apr-29 18:22:06 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2008-Apr-29 18:22:06 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2008-Apr-29 18:22:06 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2008-Apr-29 18:22:06 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-29 18:22:06 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.33064 J 2008-Apr-29 18:22:06 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.6 2008-Apr-29 18:22:06 LOG2 antvel: Parameters to Doppler: Topocentric 80526 2008 120 0.0 2008-Apr-29 18:22:06 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-29 18:22:06 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2008-Apr-29 18:22:06 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2008-Apr-29 18:22:06 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-29 18:22:06 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-29 18:22:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Apr-29 18:22:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 18:22:06 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-29 18:22:06 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-29 18:22:06 LOG5 begin_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2008-Apr-29 18:22:06 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-29 18:22:06 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.467369 2008.3306375009506 18.999933 2008-Apr-29 18:22:06 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333340 2008-Apr-29 18:22:06 LOG4 log_alfabeam: ALFABEAM 1 9.709384325271053 21.851879488881636 2008-Apr-29 18:22:06 LOG4 log_alfabeam: ALFABEAM 2 9.715024217978483 21.793119652849903 2008-Apr-29 18:22:06 LOG4 log_alfabeam: ALFABEAM 3 9.722312467044691 21.824207477614014 2008-Apr-29 18:22:06 LOG4 log_alfabeam: ALFABEAM 4 9.723949153107965 21.914906889501950 2008-Apr-29 18:22:06 LOG4 log_alfabeam: ALFABEAM 5 9.718279537843349 21.973807751715910 2008-Apr-29 18:22:06 LOG4 log_alfabeam: ALFABEAM 6 9.711003101010240 21.941868360686595 2008-Apr-29 18:22:06 INFO2 take_spectra: Starting WAPP+GALFA scan: 812000086 2008-Apr-29 18:22:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-29 18:22:07 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-29 18:22:07 LOG5 begin_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2008-Apr-29 18:22:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-29 18:22:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Apr-29 18:22:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 18:22:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:22:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:22:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80528.00 2008-Apr-29 18:22:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-29 18:22:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:22:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:22:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:22:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:22:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:22:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:22:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:22:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:22:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-29 18:22:18 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-29 18:22:18 LOG5 end_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2008-Apr-29 18:22:18 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-29 18:22:18 LOG5 end_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2008-Apr-29 18:22:18 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2008-Apr-29 18:22:18 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2008-Apr-29 18:22:18 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2008-Apr-29 18:22:18 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-29 18:22:18 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.33064 J 2008-Apr-29 18:22:18 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.6 2008-Apr-29 18:22:18 LOG2 antvel: Parameters to Doppler: Topocentric 80538 2008 120 0.0 2008-Apr-29 18:22:18 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-29 18:22:18 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2008-Apr-29 18:22:18 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2008-Apr-29 18:22:18 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-29 18:22:18 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-29 18:22:18 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Apr-29 18:22:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 18:22:18 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-29 18:22:18 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-29 18:22:18 LOG5 begin_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2008-Apr-29 18:22:18 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-29 18:22:18 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.470711 2008.3306378812076 18.999933 2008-Apr-29 18:22:18 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333329 2008-Apr-29 18:22:18 LOG4 log_alfabeam: ALFABEAM 1 9.709385826082526 21.851812382725136 2008-Apr-29 18:22:18 LOG4 log_alfabeam: ALFABEAM 2 9.715028480529233 21.793104840496927 2008-Apr-29 18:22:18 LOG4 log_alfabeam: ALFABEAM 3 9.722315271004440 21.824258975865312 2008-Apr-29 18:22:18 LOG4 log_alfabeam: ALFABEAM 4 9.723947640909197 21.914974522230001 2008-Apr-29 18:22:18 LOG4 log_alfabeam: ALFABEAM 5 9.718275170835957 21.973823013740368 2008-Apr-29 18:22:18 LOG4 log_alfabeam: ALFABEAM 6 9.711000289206735 21.941815198149961 2008-Apr-29 18:22:18 INFO2 take_spectra: Starting WAPP+GALFA scan: 812000087 2008-Apr-29 18:22:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-29 18:22:19 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-29 18:22:19 LOG5 begin_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2008-Apr-29 18:22:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-29 18:22:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Apr-29 18:22:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 18:22:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:22:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:22:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80540.00 2008-Apr-29 18:22:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-29 18:22:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:22:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:22:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:22:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:22:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:22:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:22:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:22:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:22:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-29 18:22:30 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-29 18:22:30 LOG5 end_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2008-Apr-29 18:22:30 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-29 18:22:30 LOG5 end_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2008-Apr-29 18:22:30 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2008-Apr-29 18:22:30 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2008-Apr-29 18:22:30 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2008-Apr-29 18:22:30 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-29 18:22:30 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.33064 J 2008-Apr-29 18:22:30 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.6 2008-Apr-29 18:22:30 LOG2 antvel: Parameters to Doppler: Topocentric 80550 2008 120 0.0 2008-Apr-29 18:22:30 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-29 18:22:30 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2008-Apr-29 18:22:30 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2008-Apr-29 18:22:30 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-29 18:22:30 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-29 18:22:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Apr-29 18:22:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 18:22:30 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-29 18:22:30 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-29 18:22:30 LOG5 begin_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2008-Apr-29 18:22:30 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-29 18:22:30 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.474054 2008.3306382614646 18.999933 2008-Apr-29 18:22:30 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666670 21.883333333333336 2008-Apr-29 18:22:30 LOG4 log_alfabeam: ALFABEAM 1 9.709387336382092 21.851745009861194 2008-Apr-29 18:22:30 LOG4 log_alfabeam: ALFABEAM 2 9.715032761573227 21.793090005788294 2008-Apr-29 18:22:30 LOG4 log_alfabeam: ALFABEAM 3 9.722318084247249 21.824310714879548 2008-Apr-29 18:22:30 LOG4 log_alfabeam: ALFABEAM 4 9.723946119111433 21.915042424205360 2008-Apr-29 18:22:30 LOG4 log_alfabeam: ALFABEAM 5 9.718270784753017 21.973838298938716 2008-Apr-29 18:22:30 LOG4 log_alfabeam: ALFABEAM 6 9.710997468210197 21.941761785991023 2008-Apr-29 18:22:30 INFO2 take_spectra: Starting WAPP+GALFA scan: 812000088 2008-Apr-29 18:22:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-29 18:22:31 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-29 18:22:31 LOG5 begin_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2008-Apr-29 18:22:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-29 18:22:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Apr-29 18:22:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 18:22:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:22:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:22:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80552.00 2008-Apr-29 18:22:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-29 18:22:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:22:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:22:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:22:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:22:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:22:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:22:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:22:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:22:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-29 18:22:42 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-29 18:22:42 LOG5 end_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2008-Apr-29 18:22:42 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-29 18:22:42 LOG5 end_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2008-Apr-29 18:22:42 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2008-Apr-29 18:22:42 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2008-Apr-29 18:22:42 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2008-Apr-29 18:22:42 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-29 18:22:42 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.33064 J 2008-Apr-29 18:22:42 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.6 2008-Apr-29 18:22:42 LOG2 antvel: Parameters to Doppler: Topocentric 80562 2008 120 0.0 2008-Apr-29 18:22:42 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-29 18:22:42 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2008-Apr-29 18:22:42 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2008-Apr-29 18:22:42 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-29 18:22:42 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-29 18:22:42 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Apr-29 18:22:42 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 18:22:42 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-29 18:22:42 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-29 18:22:42 LOG5 begin_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2008-Apr-29 18:22:42 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-29 18:22:42 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.477396 2008.3306386417216 18.999933 2008-Apr-29 18:22:42 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333336 2008-Apr-29 18:22:42 LOG4 log_alfabeam: ALFABEAM 1 9.709388855348015 21.851677408779715 2008-Apr-29 18:22:42 LOG4 log_alfabeam: ALFABEAM 2 9.715037058682936 21.793075157622436 2008-Apr-29 18:22:42 LOG4 log_alfabeam: ALFABEAM 3 9.722320905144329 21.824362665522603 2008-Apr-29 18:22:42 LOG4 log_alfabeam: ALFABEAM 4 9.723944588542182 21.915110556637426 2008-Apr-29 18:22:42 LOG4 log_alfabeam: ALFABEAM 5 9.718266382080555 21.973853598136898 2008-Apr-29 18:22:42 LOG4 log_alfabeam: ALFABEAM 6 9.710994639655688 21.941708154281969 2008-Apr-29 18:22:42 INFO2 take_spectra: Starting WAPP+GALFA scan: 812000089 2008-Apr-29 18:22:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-29 18:22:43 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-29 18:22:43 LOG5 begin_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2008-Apr-29 18:22:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-29 18:22:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Apr-29 18:22:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 18:22:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:22:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:22:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80564.00 2008-Apr-29 18:22:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-29 18:22:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:22:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:22:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:22:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:22:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:22:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:22:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:22:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:22:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-29 18:22:54 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-29 18:22:54 LOG5 end_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2008-Apr-29 18:22:54 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-29 18:22:54 LOG5 end_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2008-Apr-29 18:22:54 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2008-Apr-29 18:22:54 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2008-Apr-29 18:22:54 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2008-Apr-29 18:22:54 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-29 18:22:54 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.33064 J 2008-Apr-29 18:22:54 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.6 2008-Apr-29 18:22:54 LOG2 antvel: Parameters to Doppler: Topocentric 80574 2008 120 0.0 2008-Apr-29 18:22:54 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-29 18:22:54 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2008-Apr-29 18:22:54 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2008-Apr-29 18:22:54 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-29 18:22:54 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-29 18:22:54 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Apr-29 18:22:54 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 18:22:54 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-29 18:22:54 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-29 18:22:54 LOG5 begin_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2008-Apr-29 18:22:54 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-29 18:22:54 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.480739 2008.3306390219789 18.999933 2008-Apr-29 18:22:54 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333347 2008-Apr-29 18:22:54 LOG4 log_alfabeam: ALFABEAM 1 9.709390383972130 21.851609537190438 2008-Apr-29 18:22:54 LOG4 log_alfabeam: ALFABEAM 2 9.715041374565047 21.793060287139049 2008-Apr-29 18:22:54 LOG4 log_alfabeam: ALFABEAM 3 9.722323735438538 21.824414860723540 2008-Apr-29 18:22:54 LOG4 log_alfabeam: ALFABEAM 4 9.723943048201551 21.915178962150527 2008-Apr-29 18:22:54 LOG4 log_alfabeam: ALFABEAM 5 9.718261960044346 21.973868920458791 2008-Apr-29 18:22:54 LOG4 log_alfabeam: ALFABEAM 6 9.710991801797448 21.941654269024223 2008-Apr-29 18:22:54 INFO2 take_spectra: Starting WAPP+GALFA scan: 812000090 2008-Apr-29 18:22:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-29 18:22:55 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-29 18:22:55 LOG5 begin_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2008-Apr-29 18:22:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-29 18:22:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Apr-29 18:22:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 18:22:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:22:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:22:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80576.00 2008-Apr-29 18:22:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-29 18:22:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:22:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:22:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:22:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:22:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:22:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:22:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:22:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:23:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-29 18:23:06 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-29 18:23:06 LOG5 end_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2008-Apr-29 18:23:06 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-29 18:23:06 LOG5 end_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2008-Apr-29 18:23:06 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2008-Apr-29 18:23:06 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-29 18:23:06 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-29 18:23:06 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-29 18:23:06 LOG5 begin_task: Level: (3) ID = <10044> Status = 0 0 0 0 ok 2008-Apr-29 18:23:06 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-29 18:23:06 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-29 18:23:06 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-29 18:23:06 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-29 18:23:06 LOG5 end_task: Level: (3) ID = <10044> Status = 0 0 0 0 ok 2008-Apr-29 18:23:06 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2008-Apr-29 18:23:06 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2008-Apr-29 18:23:06 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2008-Apr-29 18:23:06 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-29 18:23:06 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.33064 J 2008-Apr-29 18:23:06 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.6 2008-Apr-29 18:23:06 LOG2 antvel: Parameters to Doppler: Topocentric 80586 2008 120 0.0 2008-Apr-29 18:23:06 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-29 18:23:06 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2008-Apr-29 18:23:06 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2008-Apr-29 18:23:06 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-29 18:23:06 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-29 18:23:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Apr-29 18:23:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 18:23:06 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-29 18:23:06 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-29 18:23:06 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2008-Apr-29 18:23:06 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-29 18:23:06 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.484081 2008.3306394022359 18.999933 2008-Apr-29 18:23:06 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333333 2008-Apr-29 18:23:06 LOG4 log_alfabeam: ALFABEAM 1 9.709391921423686 21.851541433847189 2008-Apr-29 18:23:06 LOG4 log_alfabeam: ALFABEAM 2 9.715045706773909 21.793045403262454 2008-Apr-29 18:23:06 LOG4 log_alfabeam: ALFABEAM 3 9.722326573491717 21.824467271114042 2008-Apr-29 18:23:06 LOG4 log_alfabeam: ALFABEAM 4 9.723941498926164 21.915247601687550 2008-Apr-29 18:23:06 LOG4 log_alfabeam: ALFABEAM 5 9.718257521149113 21.973884256703311 2008-Apr-29 18:23:06 LOG4 log_alfabeam: ALFABEAM 6 9.710988956279865 21.941600160533138 2008-Apr-29 18:23:06 INFO2 take_spectra: Starting WAPP+GALFA scan: 812000091 2008-Apr-29 18:23:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-29 18:23:07 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-29 18:23:07 LOG5 begin_task: Level: (4) ID = <10046> Status = 0 0 0 0 ok 2008-Apr-29 18:23:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-29 18:23:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Apr-29 18:23:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 18:23:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:23:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:23:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80588.00 2008-Apr-29 18:23:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-29 18:23:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:23:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:23:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:23:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:23:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:23:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:23:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:23:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:23:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.501 > 1.4)! 2008-Apr-29 18:23:10 LOG4 check_wapp_levels: WAPP-1 power levels: 1.367 1.331 1.254 1.222 2008-Apr-29 18:23:10 LOG4 check_wapp_levels: WAPP-2 power levels: 1.411 1.402 1.440 1.231 2008-Apr-29 18:23:10 LOG4 check_wapp_levels: WAPP-3 power levels: 1.398 1.423 1.501 1.260 2008-Apr-29 18:23:10 LOG4 check_wapp_levels: WAPP-4 power levels: 1.428 1.477 1.245 1.312 2008-Apr-29 18:23:12 INFO5 check_wapp_levels: WAPP power levels are between 1.220 and 1.502 (still bad) 2008-Apr-29 18:23:14 INFO5 check_wapp_levels: WAPP power levels are between 1.218 and 1.503 (still bad) 2008-Apr-29 18:23:16 INFO5 check_wapp_levels: WAPP power levels are between 1.219 and 1.503 (still bad) 2008-Apr-29 18:23:18 INFO5 check_wapp_levels: WAPP power levels are between 1.219 and 1.504 (still bad) 2008-Apr-29 18:23:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-29 18:23:18 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-29 18:23:18 LOG5 end_task: Level: (4) ID = <10046> Status = 0 0 0 0 ok 2008-Apr-29 18:23:18 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-29 18:23:18 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2008-Apr-29 18:23:18 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2008-Apr-29 18:23:18 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2008-Apr-29 18:23:18 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2008-Apr-29 18:23:18 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-29 18:23:18 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.33064 J 2008-Apr-29 18:23:18 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.6 2008-Apr-29 18:23:18 LOG2 antvel: Parameters to Doppler: Topocentric 80598 2008 120 0.0 2008-Apr-29 18:23:18 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-29 18:23:18 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2008-Apr-29 18:23:18 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2008-Apr-29 18:23:18 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-29 18:23:18 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-29 18:23:18 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Apr-29 18:23:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 18:23:18 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-29 18:23:18 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-29 18:23:18 LOG5 begin_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2008-Apr-29 18:23:18 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-29 18:23:18 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.487423 2008.3306397824929 18.999933 2008-Apr-29 18:23:18 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333333 2008-Apr-29 18:23:18 LOG4 log_alfabeam: ALFABEAM 1 9.709393468243299 21.851473076616390 2008-Apr-29 18:23:18 LOG4 log_alfabeam: ALFABEAM 2 9.715050056735670 21.793030501577192 2008-Apr-29 18:23:18 LOG4 log_alfabeam: ALFABEAM 3 9.722329420204709 21.824519914150574 2008-Apr-29 18:23:18 LOG4 log_alfabeam: ALFABEAM 4 9.723939940170750 21.915316497557836 2008-Apr-29 18:23:18 LOG4 log_alfabeam: ALFABEAM 5 9.718253063932559 21.973899611414286 2008-Apr-29 18:23:18 LOG4 log_alfabeam: ALFABEAM 6 9.710986102201518 21.941545810783271 2008-Apr-29 18:23:18 INFO2 take_spectra: Starting WAPP+GALFA scan: 812000092 2008-Apr-29 18:23:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-29 18:23:19 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-29 18:23:19 LOG5 begin_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2008-Apr-29 18:23:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-29 18:23:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Apr-29 18:23:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 18:23:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:23:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:23:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80600.00 2008-Apr-29 18:23:20 INFO5 check_wapp_levels: WAPP power levels are between 1.220 and 1.504 (still bad) 2008-Apr-29 18:23:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-29 18:23:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:23:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:23:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:23:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:23:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:23:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:23:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:23:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:23:22 INFO5 check_wapp_levels: WAPP power levels are between 1.200 and 1.448 (still bad) 2008-Apr-29 18:23:24 INFO5 check_wapp_levels: WAPP power levels are between 1.198 and 1.448 (still bad) 2008-Apr-29 18:23:26 INFO5 check_wapp_levels: WAPP power levels are between 1.198 and 1.448 (still bad) 2008-Apr-29 18:23:28 INFO5 check_wapp_levels: WAPP power levels are between 1.198 and 1.446 (still bad) 2008-Apr-29 18:23:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-29 18:23:30 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-29 18:23:30 LOG5 end_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2008-Apr-29 18:23:30 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-29 18:23:30 LOG5 end_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2008-Apr-29 18:23:30 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2008-Apr-29 18:23:30 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2008-Apr-29 18:23:30 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2008-Apr-29 18:23:30 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-29 18:23:30 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.33064 J 2008-Apr-29 18:23:30 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.6 2008-Apr-29 18:23:30 LOG2 antvel: Parameters to Doppler: Topocentric 80610 2008 120 0.0 2008-Apr-29 18:23:30 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-29 18:23:30 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2008-Apr-29 18:23:30 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2008-Apr-29 18:23:30 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-29 18:23:30 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-29 18:23:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Apr-29 18:23:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 18:23:30 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-29 18:23:30 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-29 18:23:30 LOG5 begin_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2008-Apr-29 18:23:30 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-29 18:23:30 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.490766 2008.3306401627499 18.999933 2008-Apr-29 18:23:30 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333333 2008-Apr-29 18:23:30 LOG4 log_alfabeam: ALFABEAM 1 9.709395024983827 21.851404443042810 2008-Apr-29 18:23:30 LOG4 log_alfabeam: ALFABEAM 2 9.715054425899137 21.793015577648838 2008-Apr-29 18:23:30 LOG4 log_alfabeam: ALFABEAM 3 9.722332276489166 21.824572807588059 2008-Apr-29 18:23:30 LOG4 log_alfabeam: ALFABEAM 4 9.723938371377681 21.915385672395278 2008-Apr-29 18:23:30 LOG4 log_alfabeam: ALFABEAM 5 9.718248586909027 21.973914989155030 2008-Apr-29 18:23:30 LOG4 log_alfabeam: ALFABEAM 6 9.710983238650366 21.941491201439753 2008-Apr-29 18:23:30 INFO2 take_spectra: Starting WAPP+GALFA scan: 812000093 2008-Apr-29 18:23:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-29 18:23:31 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-29 18:23:31 LOG5 begin_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2008-Apr-29 18:23:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-29 18:23:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Apr-29 18:23:31 INFO5 check_wapp_levels: WAPP power levels are between 1.197 and 1.447 (still bad) 2008-Apr-29 18:23:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 18:23:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:23:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:23:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80612.00 2008-Apr-29 18:23:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-29 18:23:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:23:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:23:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:23:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:23:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:23:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:23:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:23:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:23:33 INFO5 check_wapp_levels: WAPP power levels are between 1.196 and 1.442 (still bad) 2008-Apr-29 18:23:35 INFO5 check_wapp_levels: WAPP power levels are between 1.195 and 1.442 (still bad) 2008-Apr-29 18:23:37 INFO5 check_wapp_levels: WAPP power levels are between 1.194 and 1.443 (still bad) 2008-Apr-29 18:23:39 INFO5 check_wapp_levels: WAPP power levels are between 1.195 and 1.443 (still bad) 2008-Apr-29 18:23:41 INFO5 check_wapp_levels: WAPP power levels are between 1.195 and 1.443 (still bad) 2008-Apr-29 18:23:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-29 18:23:42 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-29 18:23:42 LOG5 end_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2008-Apr-29 18:23:42 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-29 18:23:42 LOG5 end_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2008-Apr-29 18:23:42 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2008-Apr-29 18:23:42 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2008-Apr-29 18:23:42 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2008-Apr-29 18:23:42 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-29 18:23:42 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.33064 J 2008-Apr-29 18:23:42 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.6 2008-Apr-29 18:23:42 LOG2 antvel: Parameters to Doppler: Topocentric 80622 2008 120 0.0 2008-Apr-29 18:23:42 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-29 18:23:42 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2008-Apr-29 18:23:42 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2008-Apr-29 18:23:42 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-29 18:23:42 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-29 18:23:42 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Apr-29 18:23:42 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 18:23:42 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-29 18:23:42 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-29 18:23:42 LOG5 begin_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2008-Apr-29 18:23:42 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-29 18:23:42 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.494108 2008.3306405430069 18.999933 2008-Apr-29 18:23:42 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333347 2008-Apr-29 18:23:42 LOG4 log_alfabeam: ALFABEAM 1 9.709396590800731 21.851335572282867 2008-Apr-29 18:23:42 LOG4 log_alfabeam: ALFABEAM 2 9.715058811791003 21.793000640440845 2008-Apr-29 18:23:42 LOG4 log_alfabeam: ALFABEAM 3 9.722335140692625 21.824625921700406 2008-Apr-29 18:23:42 LOG4 log_alfabeam: ALFABEAM 4 9.723936793397531 21.915455086736266 2008-Apr-29 18:23:42 LOG4 log_alfabeam: ALFABEAM 5 9.718244092611785 21.973930380683584 2008-Apr-29 18:23:42 LOG4 log_alfabeam: ALFABEAM 6 9.710980367284993 21.941436363189322 2008-Apr-29 18:23:42 INFO2 take_spectra: Starting WAPP+GALFA scan: 812000094 2008-Apr-29 18:23:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-29 18:23:43 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-29 18:23:43 LOG5 begin_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2008-Apr-29 18:23:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-29 18:23:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Apr-29 18:23:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 18:23:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:23:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:23:43 INFO5 check_wapp_levels: WAPP power levels are between 1.195 and 1.442 (still bad) 2008-Apr-29 18:23:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80624.00 2008-Apr-29 18:23:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-29 18:23:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:23:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:23:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:23:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:23:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:23:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:23:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:23:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:23:45 INFO5 check_wapp_levels: WAPP power levels are between 1.188 and 1.438 (still bad) 2008-Apr-29 18:23:47 INFO5 check_wapp_levels: WAPP power levels are between 1.188 and 1.437 (still bad) 2008-Apr-29 18:23:49 INFO5 check_wapp_levels: WAPP power levels are between 1.188 and 1.438 (still bad) 2008-Apr-29 18:23:51 INFO5 check_wapp_levels: WAPP power levels are between 1.186 and 1.437 (still bad) 2008-Apr-29 18:23:53 INFO5 check_wapp_levels: WAPP power levels are between 1.187 and 1.437 (still bad) 2008-Apr-29 18:23:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-29 18:23:54 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-29 18:23:54 LOG5 end_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2008-Apr-29 18:23:54 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-29 18:23:54 LOG5 end_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2008-Apr-29 18:23:54 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2008-Apr-29 18:23:54 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2008-Apr-29 18:23:54 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2008-Apr-29 18:23:54 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-29 18:23:54 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.33064 J 2008-Apr-29 18:23:54 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.6 2008-Apr-29 18:23:54 LOG2 antvel: Parameters to Doppler: Topocentric 80634 2008 120 0.0 2008-Apr-29 18:23:54 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-29 18:23:54 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2008-Apr-29 18:23:54 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2008-Apr-29 18:23:54 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-29 18:23:54 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-29 18:23:54 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Apr-29 18:23:54 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 18:23:54 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-29 18:23:54 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-29 18:23:54 LOG5 begin_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2008-Apr-29 18:23:54 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-29 18:23:54 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.497451 2008.3306409232641 18.999933 2008-Apr-29 18:23:54 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333329 2008-Apr-29 18:23:54 LOG4 log_alfabeam: ALFABEAM 1 9.709398166718932 21.851266421197607 2008-Apr-29 18:23:54 LOG4 log_alfabeam: ALFABEAM 2 9.715063217178070 21.792985681051579 2008-Apr-29 18:23:54 LOG4 log_alfabeam: ALFABEAM 3 9.722338014585969 21.824679290212963 2008-Apr-29 18:23:54 LOG4 log_alfabeam: ALFABEAM 4 9.723935205196893 21.915524784061738 2008-Apr-29 18:23:54 LOG4 log_alfabeam: ALFABEAM 5 9.718239578204535 21.973945795166131 2008-Apr-29 18:23:54 LOG4 log_alfabeam: ALFABEAM 6 9.710977486332036 21.941381261208175 2008-Apr-29 18:23:54 INFO2 take_spectra: Starting WAPP+GALFA scan: 812000095 2008-Apr-29 18:23:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-29 18:23:55 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-29 18:23:55 LOG5 begin_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2008-Apr-29 18:23:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-29 18:23:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Apr-29 18:23:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 18:23:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:23:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:23:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80636.00 2008-Apr-29 18:23:56 INFO5 check_wapp_levels: WAPP power levels are between 1.187 and 1.436 (still bad) 2008-Apr-29 18:23:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-29 18:23:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:23:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:23:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:23:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:23:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:23:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:23:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:23:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:23:58 INFO5 check_wapp_levels: WAPP power levels are between 1.183 and 1.438 (still bad) 2008-Apr-29 18:24:00 INFO5 check_wapp_levels: WAPP power levels are between 1.184 and 1.438 (still bad) 2008-Apr-29 18:24:02 INFO5 check_wapp_levels: WAPP power levels are between 1.182 and 1.437 (still bad) 2008-Apr-29 18:24:04 INFO5 check_wapp_levels: WAPP power levels are between 1.183 and 1.435 (still bad) 2008-Apr-29 18:24:06 INFO5 check_wapp_levels: WAPP power levels are between 1.183 and 1.436 (still bad) 2008-Apr-29 18:24:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-29 18:24:06 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-29 18:24:06 LOG5 end_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2008-Apr-29 18:24:06 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-29 18:24:06 LOG5 end_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2008-Apr-29 18:24:06 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2008-Apr-29 18:24:06 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2008-Apr-29 18:24:06 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2008-Apr-29 18:24:06 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-29 18:24:06 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.33064 J 2008-Apr-29 18:24:06 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.6 2008-Apr-29 18:24:06 LOG2 antvel: Parameters to Doppler: Topocentric 80646 2008 120 0.0 2008-Apr-29 18:24:06 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-29 18:24:06 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2008-Apr-29 18:24:06 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2008-Apr-29 18:24:06 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-29 18:24:06 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-29 18:24:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Apr-29 18:24:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 18:24:06 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-29 18:24:06 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-29 18:24:06 LOG5 begin_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2008-Apr-29 18:24:06 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-29 18:24:06 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.500793 2008.3306413035211 18.999933 2008-Apr-29 18:24:06 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333329 2008-Apr-29 18:24:06 LOG4 log_alfabeam: ALFABEAM 1 9.709399751884508 21.851197029216546 2008-Apr-29 18:24:06 LOG4 log_alfabeam: ALFABEAM 2 9.715067639568252 21.792970708470747 2008-Apr-29 18:24:06 LOG4 log_alfabeam: ALFABEAM 3 9.722340896507049 21.824732883156749 2008-Apr-29 18:24:06 LOG4 log_alfabeam: ALFABEAM 4 9.723933607635827 21.915594724632307 2008-Apr-29 18:24:06 LOG4 log_alfabeam: ALFABEAM 5 9.718235046239947 21.973961223333244 2008-Apr-29 18:24:06 LOG4 log_alfabeam: ALFABEAM 6 9.710974597459696 21.941325926435123 2008-Apr-29 18:24:06 INFO2 take_spectra: Starting WAPP+GALFA scan: 812000096 2008-Apr-29 18:24:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-29 18:24:07 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-29 18:24:07 LOG5 begin_task: Level: (4) ID = <10056> Status = 0 0 0 0 ok 2008-Apr-29 18:24:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-29 18:24:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Apr-29 18:24:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 18:24:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:24:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:24:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80648.00 2008-Apr-29 18:24:08 INFO5 check_wapp_levels: WAPP power levels are between 1.182 and 1.435 (still bad) 2008-Apr-29 18:24:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-29 18:24:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:24:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:24:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:24:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:24:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:24:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:24:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:24:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:24:10 INFO5 check_wapp_levels: WAPP power levels are between 1.183 and 1.435 (still bad) 2008-Apr-29 18:24:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.436 > 1.4)! 2008-Apr-29 18:24:12 LOG4 check_wapp_levels: WAPP-1 power levels: 1.298 1.301 1.184 1.196 2008-Apr-29 18:24:12 LOG4 check_wapp_levels: WAPP-2 power levels: 1.379 1.350 1.341 1.187 2008-Apr-29 18:24:12 LOG4 check_wapp_levels: WAPP-3 power levels: 1.311 1.370 1.391 1.199 2008-Apr-29 18:24:12 LOG4 check_wapp_levels: WAPP-4 power levels: 1.391 1.436 1.212 1.278 2008-Apr-29 18:24:14 INFO5 check_wapp_levels: WAPP power levels are between 1.184 and 1.438 (still bad) 2008-Apr-29 18:24:16 INFO5 check_wapp_levels: WAPP power levels are between 1.183 and 1.436 (still bad) 2008-Apr-29 18:24:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-29 18:24:18 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-29 18:24:18 LOG5 end_task: Level: (4) ID = <10056> Status = 0 0 0 0 ok 2008-Apr-29 18:24:18 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-29 18:24:18 LOG5 end_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2008-Apr-29 18:24:18 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2008-Apr-29 18:24:18 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2008-Apr-29 18:24:18 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2008-Apr-29 18:24:18 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-29 18:24:18 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.33064 J 2008-Apr-29 18:24:18 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.6 2008-Apr-29 18:24:18 LOG2 antvel: Parameters to Doppler: Topocentric 80658 2008 120 0.0 2008-Apr-29 18:24:18 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-29 18:24:18 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2008-Apr-29 18:24:18 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2008-Apr-29 18:24:18 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-29 18:24:18 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-29 18:24:18 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Apr-29 18:24:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 18:24:18 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-29 18:24:18 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-29 18:24:18 LOG5 begin_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2008-Apr-29 18:24:18 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-29 18:24:18 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.504136 2008.3306416837781 18.999933 2008-Apr-29 18:24:18 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333336 2008-Apr-29 18:24:18 LOG4 log_alfabeam: ALFABEAM 1 9.709401347336099 21.851127352851861 2008-Apr-29 18:24:18 LOG4 log_alfabeam: ALFABEAM 2 9.715072081753126 21.792955713780703 2008-Apr-29 18:24:18 LOG4 log_alfabeam: ALFABEAM 3 9.722343788238224 21.824786734585519 2008-Apr-29 18:24:18 LOG4 log_alfabeam: ALFABEAM 4 9.723931999667053 21.915664952281130 2008-Apr-29 18:24:18 LOG4 log_alfabeam: ALFABEAM 5 9.718230493856144 21.973976674367428 2008-Apr-29 18:24:18 LOG4 log_alfabeam: ALFABEAM 6 9.710971698883336 21.941270323706124 2008-Apr-29 18:24:18 INFO2 take_spectra: Starting WAPP+GALFA scan: 812000097 2008-Apr-29 18:24:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-29 18:24:19 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-29 18:24:19 LOG5 begin_task: Level: (4) ID = <10058> Status = 0 0 0 0 ok 2008-Apr-29 18:24:19 INFO5 check_wapp_levels: WAPP power levels are between 1.184 and 1.433 (still bad) 2008-Apr-29 18:24:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-29 18:24:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Apr-29 18:24:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 18:24:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:24:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:24:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80660.00 2008-Apr-29 18:24:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-29 18:24:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:24:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:24:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:24:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:24:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:24:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:24:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:24:21 INFO5 check_wapp_levels: WAPP power levels are between 1.184 and 1.432 (still bad) 2008-Apr-29 18:24:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:24:23 INFO5 check_wapp_levels: WAPP power levels are between 1.185 and 1.436 (still bad) 2008-Apr-29 18:24:25 INFO5 check_wapp_levels: WAPP power levels are between 1.184 and 1.437 (still bad) 2008-Apr-29 18:24:27 INFO5 check_wapp_levels: WAPP power levels are between 1.183 and 1.433 (still bad) 2008-Apr-29 18:24:29 INFO5 check_wapp_levels: WAPP power levels are between 1.184 and 1.434 (still bad) 2008-Apr-29 18:24:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-29 18:24:30 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-29 18:24:30 LOG5 end_task: Level: (4) ID = <10058> Status = 0 0 0 0 ok 2008-Apr-29 18:24:30 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-29 18:24:30 LOG5 end_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2008-Apr-29 18:24:30 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2008-Apr-29 18:24:30 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2008-Apr-29 18:24:30 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2008-Apr-29 18:24:30 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-29 18:24:30 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-29 18:24:30 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-29 18:24:30 LOG5 begin_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2008-Apr-29 18:24:30 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-29 18:24:30 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-29 18:24:30 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-29 18:24:30 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-29 18:24:30 LOG5 end_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2008-Apr-29 18:24:30 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2008-Apr-29 18:24:30 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2008-Apr-29 18:24:30 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2008-Apr-29 18:24:30 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2008-Apr-29 18:24:30 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-29 18:24:30 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.33064 J 2008-Apr-29 18:24:30 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.6 2008-Apr-29 18:24:30 LOG2 antvel: Parameters to Doppler: Topocentric 80670 2008 120 0.0 2008-Apr-29 18:24:30 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-29 18:24:30 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2008-Apr-29 18:24:30 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2008-Apr-29 18:24:30 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-29 18:24:30 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-29 18:24:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Apr-29 18:24:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 18:24:30 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-29 18:24:30 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-29 18:24:30 LOG5 begin_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2008-Apr-29 18:24:30 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-29 18:24:30 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.507478 2008.3306420640351 18.999933 2008-Apr-29 18:24:30 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666665 21.883333333333347 2008-Apr-29 18:24:30 LOG4 log_alfabeam: ALFABEAM 1 9.709402952210258 21.851057431809860 2008-Apr-29 18:24:30 LOG4 log_alfabeam: ALFABEAM 2 9.715076541221558 21.792940705997626 2008-Apr-29 18:24:30 LOG4 log_alfabeam: ALFABEAM 3 9.722346688107557 21.824840814283764 2008-Apr-29 18:24:30 LOG4 log_alfabeam: ALFABEAM 4 9.723930382160274 21.915735426989198 2008-Apr-29 18:24:30 LOG4 log_alfabeam: ALFABEAM 5 9.718225923625463 21.973992138971582 2008-Apr-29 18:24:30 LOG4 log_alfabeam: ALFABEAM 6 9.710968792280887 21.941214484215788 2008-Apr-29 18:24:30 INFO2 take_spectra: Starting WAPP+GALFA scan: 812000098 2008-Apr-29 18:24:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-29 18:24:31 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-29 18:24:31 LOG5 begin_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2008-Apr-29 18:24:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-29 18:24:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Apr-29 18:24:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 18:24:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:24:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:24:31 INFO5 check_wapp_levels: WAPP power levels are between 1.184 and 1.436 (still bad) 2008-Apr-29 18:24:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80672.00 2008-Apr-29 18:24:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-29 18:24:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:24:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:24:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:24:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:24:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:24:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:24:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:24:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:24:33 INFO5 check_wapp_levels: WAPP power levels are between 1.184 and 1.436 (still bad) 2008-Apr-29 18:24:35 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.905 and 1.099 2008-Apr-29 18:24:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-29 18:24:42 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-29 18:24:42 LOG5 end_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2008-Apr-29 18:24:42 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-29 18:24:42 LOG5 end_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2008-Apr-29 18:24:42 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2008-Apr-29 18:24:42 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2008-Apr-29 18:24:42 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2008-Apr-29 18:24:42 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-29 18:24:42 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.33064 J 2008-Apr-29 18:24:42 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.6 2008-Apr-29 18:24:42 LOG2 antvel: Parameters to Doppler: Topocentric 80682 2008 120 0.0 2008-Apr-29 18:24:42 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-29 18:24:42 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2008-Apr-29 18:24:42 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2008-Apr-29 18:24:42 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-29 18:24:42 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-29 18:24:42 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Apr-29 18:24:42 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 18:24:42 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-29 18:24:42 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-29 18:24:42 LOG5 begin_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2008-Apr-29 18:24:42 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-29 18:24:42 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.510821 2008.3306424442922 18.999933 2008-Apr-29 18:24:42 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666663 21.883333333333329 2008-Apr-29 18:24:42 LOG4 log_alfabeam: ALFABEAM 1 9.709404567559593 21.850987222248222 2008-Apr-29 18:24:42 LOG4 log_alfabeam: ALFABEAM 2 9.715081020790308 21.792925676188226 2008-Apr-29 18:24:42 LOG4 log_alfabeam: ALFABEAM 3 9.722349597909004 21.824895156639517 2008-Apr-29 18:24:42 LOG4 log_alfabeam: ALFABEAM 4 9.723928754054048 21.915806192947443 2008-Apr-29 18:24:42 LOG4 log_alfabeam: ALFABEAM 5 9.718221332660018 21.974007626344214 2008-Apr-29 18:24:42 LOG4 log_alfabeam: ALFABEAM 6 9.710965875856283 21.941158372453728 2008-Apr-29 18:24:42 INFO2 take_spectra: Starting WAPP+GALFA scan: 812000099 2008-Apr-29 18:24:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-29 18:24:43 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-29 18:24:43 LOG5 begin_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2008-Apr-29 18:24:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-29 18:24:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Apr-29 18:24:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 18:24:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:24:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:24:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80684.00 2008-Apr-29 18:24:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-29 18:24:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:24:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:24:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:24:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:24:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:24:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:24:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:24:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:24:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (6.865 > 1.4)! 2008-Apr-29 18:24:53 LOG4 check_wapp_levels: WAPP-1 power levels: 0.960 6.865 0.902 0.902 2008-Apr-29 18:24:53 LOG4 check_wapp_levels: WAPP-2 power levels: 1.032 1.011 1.006 0.896 2008-Apr-29 18:24:53 LOG4 check_wapp_levels: WAPP-3 power levels: 0.974 1.021 1.034 0.923 2008-Apr-29 18:24:53 LOG4 check_wapp_levels: WAPP-4 power levels: 1.006 1.055 0.877 0.938 2008-Apr-29 18:24:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-29 18:24:54 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-29 18:24:54 LOG5 end_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2008-Apr-29 18:24:54 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-29 18:24:54 LOG5 end_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2008-Apr-29 18:24:54 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2008-Apr-29 18:24:54 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2008-Apr-29 18:24:54 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2008-Apr-29 18:24:54 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-29 18:24:54 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.33064 J 2008-Apr-29 18:24:54 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.6 2008-Apr-29 18:24:54 LOG2 antvel: Parameters to Doppler: Topocentric 80694 2008 120 0.0 2008-Apr-29 18:24:54 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-29 18:24:54 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2008-Apr-29 18:24:54 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2008-Apr-29 18:24:54 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-29 18:24:54 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-29 18:24:54 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Apr-29 18:24:54 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 18:24:54 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-29 18:24:54 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-29 18:24:54 LOG5 begin_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2008-Apr-29 18:24:54 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-29 18:24:54 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.514163 2008.3306428245494 18.999933 2008-Apr-29 18:24:54 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333336 2008-Apr-29 18:24:54 LOG4 log_alfabeam: ALFABEAM 1 9.709406192510979 21.850916764154015 2008-Apr-29 18:24:54 LOG4 log_alfabeam: ALFABEAM 2 9.715085517928927 21.792910633395216 2008-Apr-29 18:24:54 LOG4 log_alfabeam: ALFABEAM 3 9.722352515960713 21.824949731187093 2008-Apr-29 18:24:54 LOG4 log_alfabeam: ALFABEAM 4 9.723927116227873 21.915877209853406 2008-Apr-29 18:24:54 LOG4 log_alfabeam: ALFABEAM 5 9.718216723552091 21.974023127160507 2008-Apr-29 18:24:54 LOG4 log_alfabeam: ALFABEAM 6 9.710962951297308 21.941102019874268 2008-Apr-29 18:24:54 INFO2 take_spectra: Starting WAPP+GALFA scan: 812000100 2008-Apr-29 18:24:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-29 18:24:55 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-29 18:24:55 LOG5 begin_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2008-Apr-29 18:24:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-29 18:24:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Apr-29 18:24:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 18:24:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:24:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:24:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80696.00 2008-Apr-29 18:24:56 INFO5 check_wapp_levels: WAPP power levels are between 0.877 and 6.882 (still bad) 2008-Apr-29 18:24:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-29 18:24:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:24:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:24:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:24:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:24:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:24:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:24:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:24:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:24:58 INFO5 check_wapp_levels: WAPP power levels are between 0.875 and 6.851 (still bad) 2008-Apr-29 18:25:00 INFO5 check_wapp_levels: WAPP power levels are between 0.875 and 6.851 (still bad) 2008-Apr-29 18:25:02 INFO5 check_wapp_levels: WAPP power levels are between 0.875 and 6.657 (still bad) 2008-Apr-29 18:25:04 INFO5 check_wapp_levels: WAPP power levels are between 0.875 and 6.315 (still bad) 2008-Apr-29 18:25:06 INFO5 check_wapp_levels: WAPP power levels are between 0.874 and 6.826 (still bad) 2008-Apr-29 18:25:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-29 18:25:06 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-29 18:25:06 LOG5 end_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2008-Apr-29 18:25:06 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-29 18:25:06 LOG5 end_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2008-Apr-29 18:25:06 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2008-Apr-29 18:25:06 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2008-Apr-29 18:25:06 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2008-Apr-29 18:25:06 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-29 18:25:06 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.33064 J 2008-Apr-29 18:25:06 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.6 2008-Apr-29 18:25:06 LOG2 antvel: Parameters to Doppler: Topocentric 80706 2008 120 0.0 2008-Apr-29 18:25:06 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-29 18:25:06 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2008-Apr-29 18:25:06 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2008-Apr-29 18:25:06 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-29 18:25:06 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-29 18:25:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Apr-29 18:25:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 18:25:06 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-29 18:25:06 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-29 18:25:06 LOG5 begin_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2008-Apr-29 18:25:06 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-29 18:25:06 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.517506 2008.3306432048064 18.999933 2008-Apr-29 18:25:06 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333333 2008-Apr-29 18:25:06 LOG4 log_alfabeam: ALFABEAM 1 9.709407828131292 21.850846013324805 2008-Apr-29 18:25:06 LOG4 log_alfabeam: ALFABEAM 2 9.715090035479799 21.792895568670087 2008-Apr-29 18:25:06 LOG4 log_alfabeam: ALFABEAM 3 9.722355444068402 21.825004572654777 2008-Apr-29 18:25:06 LOG4 log_alfabeam: ALFABEAM 4 9.723925467605868 21.915948522261495 2008-Apr-29 18:25:06 LOG4 log_alfabeam: ALFABEAM 5 9.718212093387352 21.974038650634409 2008-Apr-29 18:25:06 LOG4 log_alfabeam: ALFABEAM 6 9.710960016796324 21.941045390614409 2008-Apr-29 18:25:06 INFO2 take_spectra: Starting WAPP+GALFA scan: 812000101 2008-Apr-29 18:25:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-29 18:25:07 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-29 18:25:07 LOG5 begin_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2008-Apr-29 18:25:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-29 18:25:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Apr-29 18:25:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 18:25:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:25:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:25:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80708.00 2008-Apr-29 18:25:08 INFO5 check_wapp_levels: WAPP power levels are between 0.874 and 6.826 (still bad) 2008-Apr-29 18:25:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-29 18:25:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:25:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:25:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:25:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:25:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:25:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:25:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:25:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:25:10 INFO5 check_wapp_levels: WAPP power levels are between 0.873 and 6.862 (still bad) 2008-Apr-29 18:25:12 INFO5 check_wapp_levels: WAPP power levels are between 0.873 and 6.431 (still bad) 2008-Apr-29 18:25:14 INFO5 check_wapp_levels: WAPP power levels are between 0.873 and 5.706 (still bad) 2008-Apr-29 18:25:16 INFO5 check_wapp_levels: WAPP power levels are between 0.872 and 6.940 (still bad) 2008-Apr-29 18:25:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-29 18:25:18 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-29 18:25:18 LOG5 end_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2008-Apr-29 18:25:18 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-29 18:25:18 LOG5 end_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2008-Apr-29 18:25:18 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2008-Apr-29 18:25:18 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2008-Apr-29 18:25:18 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2008-Apr-29 18:25:18 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-29 18:25:18 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.33064 J 2008-Apr-29 18:25:18 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.6 2008-Apr-29 18:25:18 LOG2 antvel: Parameters to Doppler: Topocentric 80718 2008 120 0.0 2008-Apr-29 18:25:18 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-29 18:25:18 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2008-Apr-29 18:25:18 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2008-Apr-29 18:25:18 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-29 18:25:18 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-29 18:25:18 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Apr-29 18:25:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 18:25:18 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-29 18:25:18 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-29 18:25:18 LOG5 begin_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2008-Apr-29 18:25:18 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-29 18:25:18 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.520848 2008.3306435850634 18.999933 2008-Apr-29 18:25:18 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666665 21.883333333333329 2008-Apr-29 18:25:18 LOG4 log_alfabeam: ALFABEAM 1 9.709409473537557 21.850775010032233 2008-Apr-29 18:25:18 LOG4 log_alfabeam: ALFABEAM 2 9.715094570892859 21.792880491082240 2008-Apr-29 18:25:18 LOG4 log_alfabeam: ALFABEAM 3 9.722358380540166 21.825059650322974 2008-Apr-29 18:25:18 LOG4 log_alfabeam: ALFABEAM 4 9.723923809077473 21.916020089581867 2008-Apr-29 18:25:18 LOG4 log_alfabeam: ALFABEAM 5 9.718207444778308 21.974054187413202 2008-Apr-29 18:25:18 LOG4 log_alfabeam: ALFABEAM 6 9.710957074051095 21.940988516392043 2008-Apr-29 18:25:18 INFO2 take_spectra: Starting WAPP+GALFA scan: 812000102 2008-Apr-29 18:25:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-29 18:25:19 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-29 18:25:19 LOG5 begin_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2008-Apr-29 18:25:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-29 18:25:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Apr-29 18:25:19 INFO5 check_wapp_levels: WAPP power levels are between 0.872 and 6.973 (still bad) 2008-Apr-29 18:25:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 18:25:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:25:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:25:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80720.00 2008-Apr-29 18:25:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-29 18:25:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:25:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:25:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:25:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:25:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:25:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:25:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:25:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:25:21 INFO5 check_wapp_levels: WAPP power levels are between 0.874 and 6.951 (still bad) 2008-Apr-29 18:25:23 INFO5 check_wapp_levels: WAPP power levels are between 0.874 and 6.954 (still bad) 2008-Apr-29 18:25:25 INFO5 check_wapp_levels: WAPP power levels are between 0.873 and 6.863 (still bad) 2008-Apr-29 18:25:27 INFO5 check_wapp_levels: WAPP power levels are between 0.873 and 6.951 (still bad) 2008-Apr-29 18:25:29 INFO5 check_wapp_levels: WAPP power levels are between 0.874 and 6.683 (still bad) 2008-Apr-29 18:25:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-29 18:25:30 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-29 18:25:30 LOG5 end_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2008-Apr-29 18:25:30 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-29 18:25:30 LOG5 end_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2008-Apr-29 18:25:30 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2008-Apr-29 18:25:30 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2008-Apr-29 18:25:30 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2008-Apr-29 18:25:30 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-29 18:25:30 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.33064 J 2008-Apr-29 18:25:30 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.6 2008-Apr-29 18:25:30 LOG2 antvel: Parameters to Doppler: Topocentric 80730 2008 120 0.0 2008-Apr-29 18:25:30 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-29 18:25:30 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2008-Apr-29 18:25:30 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2008-Apr-29 18:25:30 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-29 18:25:30 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-29 18:25:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Apr-29 18:25:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 18:25:30 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-29 18:25:30 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-29 18:25:30 LOG5 begin_task: Level: (3) ID = <10070> Status = 0 0 0 0 ok 2008-Apr-29 18:25:30 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-29 18:25:30 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.524190 2008.3306439653204 18.999933 2008-Apr-29 18:25:30 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333354 2008-Apr-29 18:25:30 LOG4 log_alfabeam: ALFABEAM 1 9.709411129314224 21.850703731077679 2008-Apr-29 18:25:30 LOG4 log_alfabeam: ALFABEAM 2 9.715099125670763 21.792865396187644 2008-Apr-29 18:25:30 LOG4 log_alfabeam: ALFABEAM 3 9.722361326310834 21.825114982671451 2008-Apr-29 18:25:30 LOG4 log_alfabeam: ALFABEAM 4 9.723922140053061 21.916091935198565 2008-Apr-29 18:25:30 LOG4 log_alfabeam: ALFABEAM 5 9.718202776183698 21.974069742069013 2008-Apr-29 18:25:30 LOG4 log_alfabeam: ALFABEAM 6 9.710954122126928 21.940931378122077 2008-Apr-29 18:25:30 INFO2 take_spectra: Starting WAPP+GALFA scan: 812000103 2008-Apr-29 18:25:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-29 18:25:31 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-29 18:25:31 LOG5 begin_task: Level: (4) ID = <10071> Status = 0 0 0 0 ok 2008-Apr-29 18:25:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-29 18:25:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Apr-29 18:25:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 18:25:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:25:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:25:31 INFO5 check_wapp_levels: WAPP power levels are between 0.873 and 6.860 (still bad) 2008-Apr-29 18:25:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80732.00 2008-Apr-29 18:25:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-29 18:25:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:25:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:25:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:25:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:25:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:25:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:25:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:25:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:25:33 INFO5 check_wapp_levels: WAPP power levels are between 0.874 and 6.875 (still bad) 2008-Apr-29 18:25:35 INFO5 check_wapp_levels: WAPP power levels are between 0.874 and 6.966 (still bad) 2008-Apr-29 18:25:37 INFO5 check_wapp_levels: WAPP power levels are between 0.875 and 6.946 (still bad) 2008-Apr-29 18:25:39 INFO5 check_wapp_levels: WAPP power levels are between 0.874 and 6.947 (still bad) 2008-Apr-29 18:25:41 INFO5 check_wapp_levels: WAPP power levels are between 0.874 and 5.711 (still bad) 2008-Apr-29 18:25:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-29 18:25:42 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-29 18:25:42 LOG5 end_task: Level: (4) ID = <10071> Status = 0 0 0 0 ok 2008-Apr-29 18:25:42 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-29 18:25:42 LOG5 end_task: Level: (3) ID = <10070> Status = 0 0 0 0 ok 2008-Apr-29 18:25:42 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2008-Apr-29 18:25:42 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2008-Apr-29 18:25:42 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2008-Apr-29 18:25:42 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-29 18:25:42 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.33064 J 2008-Apr-29 18:25:42 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.6 2008-Apr-29 18:25:42 LOG2 antvel: Parameters to Doppler: Topocentric 80742 2008 120 0.0 2008-Apr-29 18:25:42 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-29 18:25:42 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2008-Apr-29 18:25:42 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2008-Apr-29 18:25:42 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-29 18:25:42 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-29 18:25:42 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Apr-29 18:25:42 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 18:25:42 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-29 18:25:42 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-29 18:25:42 LOG5 begin_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2008-Apr-29 18:25:42 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-29 18:25:42 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.527533 2008.3306443455776 18.999933 2008-Apr-29 18:25:42 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333347 2008-Apr-29 18:25:42 LOG4 log_alfabeam: ALFABEAM 1 9.709412796059318 21.850632152912308 2008-Apr-29 18:25:42 LOG4 log_alfabeam: ALFABEAM 2 9.715103701340961 21.792850279524611 2008-Apr-29 18:25:42 LOG4 log_alfabeam: ALFABEAM 3 9.722364282326813 21.825170588507778 2008-Apr-29 18:25:42 LOG4 log_alfabeam: ALFABEAM 4 9.723920459929229 21.916164082849210 2008-Apr-29 18:25:42 LOG4 log_alfabeam: ALFABEAM 5 9.718198086036688 21.974085319191914 2008-Apr-29 18:25:42 LOG4 log_alfabeam: ALFABEAM 6 9.710951160077707 21.940873956379505 2008-Apr-29 18:25:42 INFO2 take_spectra: Starting WAPP+GALFA scan: 812000104 2008-Apr-29 18:25:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-29 18:25:43 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-29 18:25:43 LOG5 begin_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2008-Apr-29 18:25:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-29 18:25:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Apr-29 18:25:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 18:25:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:25:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:25:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80744.00 2008-Apr-29 18:25:44 INFO5 check_wapp_levels: WAPP power levels are between 0.874 and 6.978 (still bad) 2008-Apr-29 18:25:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-29 18:25:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:25:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:25:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:25:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:25:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:25:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:25:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:25:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:25:46 INFO5 check_wapp_levels: WAPP power levels are between 0.878 and 6.674 (still bad) 2008-Apr-29 18:25:48 INFO5 check_wapp_levels: WAPP power levels are between 0.878 and 6.752 (still bad) 2008-Apr-29 18:25:50 INFO5 check_wapp_levels: WAPP power levels are between 0.878 and 6.970 (still bad) 2008-Apr-29 18:25:52 INFO5 check_wapp_levels: WAPP power levels are between 0.878 and 6.960 (still bad) 2008-Apr-29 18:25:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (6.966 > 1.4)! 2008-Apr-29 18:25:54 LOG4 check_wapp_levels: WAPP-1 power levels: 0.953 6.966 0.887 0.895 2008-Apr-29 18:25:54 LOG4 check_wapp_levels: WAPP-2 power levels: 1.027 0.987 0.984 0.883 2008-Apr-29 18:25:54 LOG4 check_wapp_levels: WAPP-3 power levels: 0.960 1.005 1.014 0.903 2008-Apr-29 18:25:54 LOG4 check_wapp_levels: WAPP-4 power levels: 1.008 1.046 0.878 0.930 2008-Apr-29 18:25:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-29 18:25:54 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-29 18:25:54 LOG5 end_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2008-Apr-29 18:25:54 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-29 18:25:54 LOG5 end_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2008-Apr-29 18:25:54 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2008-Apr-29 18:25:54 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-29 18:25:54 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-29 18:25:54 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-29 18:25:54 LOG5 begin_task: Level: (3) ID = <10074> Status = 0 0 0 0 ok 2008-Apr-29 18:25:54 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-29 18:25:54 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-29 18:25:54 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-29 18:25:54 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-29 18:25:54 LOG5 end_task: Level: (3) ID = <10074> Status = 0 0 0 0 ok 2008-Apr-29 18:25:54 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2008-Apr-29 18:25:54 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2008-Apr-29 18:25:54 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2008-Apr-29 18:25:54 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-29 18:25:54 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.33064 J 2008-Apr-29 18:25:54 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.6 2008-Apr-29 18:25:54 LOG2 antvel: Parameters to Doppler: Topocentric 80754 2008 120 0.0 2008-Apr-29 18:25:54 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-29 18:25:54 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2008-Apr-29 18:25:54 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2008-Apr-29 18:25:54 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-29 18:25:54 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-29 18:25:54 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Apr-29 18:25:54 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 18:25:54 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-29 18:25:54 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-29 18:25:54 LOG5 begin_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2008-Apr-29 18:25:54 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-29 18:25:54 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.530875 2008.3306447258346 18.999933 2008-Apr-29 18:25:54 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333322 2008-Apr-29 18:25:54 LOG4 log_alfabeam: ALFABEAM 1 9.709414472874810 21.850560316242223 2008-Apr-29 18:25:54 LOG4 log_alfabeam: ALFABEAM 2 9.715108295323427 21.792835150202908 2008-Apr-29 18:25:54 LOG4 log_alfabeam: ALFABEAM 3 9.722367246880868 21.825226436724410 2008-Apr-29 18:25:54 LOG4 log_alfabeam: ALFABEAM 4 9.723918769610666 21.916236491505103 2008-Apr-29 18:25:54 LOG4 log_alfabeam: ALFABEAM 5 9.718193376980668 21.974100909387083 2008-Apr-29 18:25:54 LOG4 log_alfabeam: ALFABEAM 6 9.710948189616415 21.940816283284889 2008-Apr-29 18:25:54 INFO2 take_spectra: Starting WAPP+GALFA scan: 812000105 2008-Apr-29 18:25:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-29 18:25:55 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-29 18:25:55 LOG5 begin_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2008-Apr-29 18:25:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-29 18:25:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Apr-29 18:25:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 18:25:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:25:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:25:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80756.00 2008-Apr-29 18:25:56 INFO5 check_wapp_levels: WAPP power levels are between 0.878 and 6.960 (still bad) 2008-Apr-29 18:25:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-29 18:25:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:25:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:25:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:25:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:25:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:25:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:25:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:25:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:25:58 INFO5 check_wapp_levels: WAPP power levels are between 1.205 and 9.234 (still bad) 2008-Apr-29 18:26:00 INFO5 check_wapp_levels: WAPP power levels are between 1.203 and 9.428 (still bad) 2008-Apr-29 18:26:02 INFO5 check_wapp_levels: WAPP power levels are between 1.203 and 9.481 (still bad) 2008-Apr-29 18:26:04 INFO5 check_wapp_levels: WAPP power levels are between 1.203 and 9.460 (still bad) 2008-Apr-29 18:26:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-29 18:26:06 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-29 18:26:06 LOG5 end_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2008-Apr-29 18:26:06 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-29 18:26:06 LOG5 end_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2008-Apr-29 18:26:06 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2008-Apr-29 18:26:06 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2008-Apr-29 18:26:06 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2008-Apr-29 18:26:06 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-29 18:26:06 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.33065 J 2008-Apr-29 18:26:06 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.6 2008-Apr-29 18:26:06 LOG2 antvel: Parameters to Doppler: Topocentric 80766 2008 120 0.0 2008-Apr-29 18:26:06 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-29 18:26:06 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2008-Apr-29 18:26:06 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2008-Apr-29 18:26:06 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-29 18:26:06 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-29 18:26:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Apr-29 18:26:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 18:26:06 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-29 18:26:06 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-29 18:26:06 LOG5 begin_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2008-Apr-29 18:26:06 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-29 18:26:06 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.534218 2008.3306451060917 18.999933 2008-Apr-29 18:26:06 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333333 2008-Apr-29 18:26:06 LOG4 log_alfabeam: ALFABEAM 1 9.709416160864540 21.850488175939130 2008-Apr-29 18:26:06 LOG4 log_alfabeam: ALFABEAM 2 9.715112910526571 21.792819999237704 2008-Apr-29 18:26:06 LOG4 log_alfabeam: ALFABEAM 3 9.722370221808847 21.825282562927466 2008-Apr-29 18:26:06 LOG4 log_alfabeam: ALFABEAM 4 9.723917067984052 21.916309206655320 2008-Apr-29 18:26:06 LOG4 log_alfabeam: ALFABEAM 5 9.718188646033202 21.974116521905355 2008-Apr-29 18:26:06 LOG4 log_alfabeam: ALFABEAM 6 9.710945208905807 21.940758322065903 2008-Apr-29 18:26:06 INFO2 take_spectra: Starting WAPP+GALFA scan: 812000106 2008-Apr-29 18:26:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-29 18:26:07 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-29 18:26:07 LOG5 begin_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2008-Apr-29 18:26:07 INFO5 check_wapp_levels: WAPP power levels are between 1.206 and 9.456 (still bad) 2008-Apr-29 18:26:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-29 18:26:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Apr-29 18:26:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 18:26:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:26:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:26:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80768.00 2008-Apr-29 18:26:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-29 18:26:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:26:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:26:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:26:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:26:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:26:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:26:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:26:09 INFO5 check_wapp_levels: WAPP power levels are between 1.207 and 9.455 (still bad) 2008-Apr-29 18:26:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:26:11 INFO5 check_wapp_levels: WAPP power levels are between 1.182 and 9.219 (still bad) 2008-Apr-29 18:26:13 INFO5 check_wapp_levels: WAPP power levels are between 1.181 and 9.207 (still bad) 2008-Apr-29 18:26:15 INFO5 check_wapp_levels: WAPP power levels are between 1.182 and 9.191 (still bad) 2008-Apr-29 18:26:17 INFO5 check_wapp_levels: WAPP power levels are between 1.180 and 9.196 (still bad) 2008-Apr-29 18:26:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-29 18:26:18 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-29 18:26:18 LOG5 end_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2008-Apr-29 18:26:18 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-29 18:26:18 LOG5 end_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2008-Apr-29 18:26:18 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2008-Apr-29 18:26:18 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2008-Apr-29 18:26:18 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2008-Apr-29 18:26:18 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-29 18:26:18 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.33065 J 2008-Apr-29 18:26:18 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.6 2008-Apr-29 18:26:18 LOG2 antvel: Parameters to Doppler: Topocentric 80778 2008 120 0.0 2008-Apr-29 18:26:18 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-29 18:26:18 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2008-Apr-29 18:26:18 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2008-Apr-29 18:26:18 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-29 18:26:18 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-29 18:26:18 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Apr-29 18:26:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 18:26:18 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-29 18:26:18 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-29 18:26:18 LOG5 begin_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2008-Apr-29 18:26:18 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-29 18:26:18 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.537560 2008.3306454863487 18.999933 2008-Apr-29 18:26:18 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333329 2008-Apr-29 18:26:18 LOG4 log_alfabeam: ALFABEAM 1 9.709417859120224 21.850415773003860 2008-Apr-29 18:26:18 LOG4 log_alfabeam: ALFABEAM 2 9.715117544350052 21.792804835765807 2008-Apr-29 18:26:18 LOG4 log_alfabeam: ALFABEAM 3 9.722373205393138 21.825338935745762 2008-Apr-29 18:26:18 LOG4 log_alfabeam: ALFABEAM 4 9.723915355964460 21.916382186973454 2008-Apr-29 18:26:18 LOG4 log_alfabeam: ALFABEAM 5 9.718183895858672 21.974132147323562 2008-Apr-29 18:26:18 LOG4 log_alfabeam: ALFABEAM 6 9.710942219669176 21.940700105116537 2008-Apr-29 18:26:18 INFO2 take_spectra: Starting WAPP+GALFA scan: 812000107 2008-Apr-29 18:26:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-29 18:26:19 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-29 18:26:19 LOG5 begin_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2008-Apr-29 18:26:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-29 18:26:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Apr-29 18:26:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 18:26:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:26:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:26:19 INFO5 check_wapp_levels: WAPP power levels are between 1.181 and 9.192 (still bad) 2008-Apr-29 18:26:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80780.00 2008-Apr-29 18:26:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-29 18:26:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:26:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:26:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:26:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:26:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:26:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:26:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:26:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:26:21 INFO5 check_wapp_levels: WAPP power levels are between 1.181 and 9.192 (still bad) 2008-Apr-29 18:26:23 INFO5 check_wapp_levels: WAPP power levels are between 1.178 and 9.171 (still bad) 2008-Apr-29 18:26:25 INFO5 check_wapp_levels: WAPP power levels are between 1.178 and 9.157 (still bad) 2008-Apr-29 18:26:27 INFO5 check_wapp_levels: WAPP power levels are between 1.176 and 9.140 (still bad) 2008-Apr-29 18:26:29 INFO5 check_wapp_levels: WAPP power levels are between 1.178 and 9.141 (still bad) 2008-Apr-29 18:26:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-29 18:26:30 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-29 18:26:30 LOG5 end_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2008-Apr-29 18:26:30 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-29 18:26:30 LOG5 end_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2008-Apr-29 18:26:30 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2008-Apr-29 18:26:30 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2008-Apr-29 18:26:30 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2008-Apr-29 18:26:30 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-29 18:26:30 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.33065 J 2008-Apr-29 18:26:30 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.6 2008-Apr-29 18:26:30 LOG2 antvel: Parameters to Doppler: Topocentric 80790 2008 120 0.0 2008-Apr-29 18:26:30 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-29 18:26:30 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2008-Apr-29 18:26:30 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2008-Apr-29 18:26:30 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-29 18:26:30 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-29 18:26:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Apr-29 18:26:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 18:26:30 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-29 18:26:30 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-29 18:26:30 LOG5 begin_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2008-Apr-29 18:26:30 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-29 18:26:30 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.540903 2008.3306458666057 18.999933 2008-Apr-29 18:26:30 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666670 21.883333333333347 2008-Apr-29 18:26:30 LOG4 log_alfabeam: ALFABEAM 1 9.709419568761044 21.850343061927148 2008-Apr-29 18:26:30 LOG4 log_alfabeam: ALFABEAM 2 9.715122199729477 21.792789650788677 2008-Apr-29 18:26:30 LOG4 log_alfabeam: ALFABEAM 3 9.722376199481920 21.825395591147807 2008-Apr-29 18:26:30 LOG4 log_alfabeam: ALFABEAM 4 9.723913632423047 21.916455478333045 2008-Apr-29 18:26:30 LOG4 log_alfabeam: ALFABEAM 5 9.718179123446562 21.974147794906379 2008-Apr-29 18:26:30 LOG4 log_alfabeam: ALFABEAM 6 9.710939220057183 21.940641595289144 2008-Apr-29 18:26:30 INFO2 take_spectra: Starting WAPP+GALFA scan: 812000108 2008-Apr-29 18:26:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-29 18:26:31 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-29 18:26:31 LOG5 begin_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2008-Apr-29 18:26:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-29 18:26:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Apr-29 18:26:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 18:26:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:26:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:26:31 INFO5 check_wapp_levels: WAPP power levels are between 1.177 and 9.150 (still bad) 2008-Apr-29 18:26:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80792.00 2008-Apr-29 18:26:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-29 18:26:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:26:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:26:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:26:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:26:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:26:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:26:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:26:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:26:33 INFO5 check_wapp_levels: WAPP power levels are between 1.177 and 9.150 (still bad) 2008-Apr-29 18:26:35 INFO5 check_wapp_levels: WAPP power levels are between 1.173 and 9.108 (still bad) 2008-Apr-29 18:26:37 INFO5 check_wapp_levels: WAPP power levels are between 1.174 and 9.116 (still bad) 2008-Apr-29 18:26:39 INFO5 check_wapp_levels: WAPP power levels are between 1.172 and 9.115 (still bad) 2008-Apr-29 18:26:41 INFO5 check_wapp_levels: WAPP power levels are between 1.173 and 8.646 (still bad) 2008-Apr-29 18:26:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-29 18:26:42 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-29 18:26:42 LOG5 end_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2008-Apr-29 18:26:42 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-29 18:26:42 LOG5 end_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2008-Apr-29 18:26:42 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2008-Apr-29 18:26:42 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2008-Apr-29 18:26:42 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2008-Apr-29 18:26:42 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-29 18:26:42 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.33065 J 2008-Apr-29 18:26:42 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.6 2008-Apr-29 18:26:42 LOG2 antvel: Parameters to Doppler: Topocentric 80802 2008 120 0.0 2008-Apr-29 18:26:42 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-29 18:26:42 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2008-Apr-29 18:26:42 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2008-Apr-29 18:26:42 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-29 18:26:42 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-29 18:26:42 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Apr-29 18:26:42 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 18:26:42 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-29 18:26:42 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-29 18:26:42 LOG5 begin_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2008-Apr-29 18:26:42 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-29 18:26:42 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.544245 2008.3306462468629 18.999933 2008-Apr-29 18:26:42 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666670 21.883333333333322 2008-Apr-29 18:26:42 LOG4 log_alfabeam: ALFABEAM 1 9.709421288868276 21.850270084008784 2008-Apr-29 18:26:42 LOG4 log_alfabeam: ALFABEAM 2 9.715126874043868 21.792774453470297 2008-Apr-29 18:26:42 LOG4 log_alfabeam: ALFABEAM 3 9.722379202347051 21.825452497494908 2008-Apr-29 18:26:42 LOG4 log_alfabeam: ALFABEAM 4 9.723911898285408 21.916529039105807 2008-Apr-29 18:26:42 LOG4 log_alfabeam: ALFABEAM 5 9.718174331482530 21.974163455202273 2008-Apr-29 18:26:42 LOG4 log_alfabeam: ALFABEAM 6 9.710936211803535 21.940582825255326 2008-Apr-29 18:26:42 INFO2 take_spectra: Starting WAPP+GALFA scan: 812000109 2008-Apr-29 18:26:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-29 18:26:43 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-29 18:26:43 LOG5 begin_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2008-Apr-29 18:26:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-29 18:26:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Apr-29 18:26:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 18:26:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:26:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:26:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80804.00 2008-Apr-29 18:26:44 INFO5 check_wapp_levels: WAPP power levels are between 1.172 and 9.134 (still bad) 2008-Apr-29 18:26:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-29 18:26:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:26:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:26:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:26:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:26:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:26:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:26:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:26:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:26:46 INFO5 check_wapp_levels: WAPP power levels are between 1.170 and 9.109 (still bad) 2008-Apr-29 18:26:48 INFO5 check_wapp_levels: WAPP power levels are between 1.170 and 9.106 (still bad) 2008-Apr-29 18:26:50 INFO5 check_wapp_levels: WAPP power levels are between 1.170 and 9.092 (still bad) 2008-Apr-29 18:26:52 INFO5 check_wapp_levels: WAPP power levels are between 1.169 and 9.090 (still bad) 2008-Apr-29 18:26:54 INFO5 check_wapp_levels: WAPP power levels are between 1.169 and 9.096 (still bad) 2008-Apr-29 18:26:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-29 18:26:54 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-29 18:26:54 LOG5 end_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2008-Apr-29 18:26:54 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-29 18:26:54 LOG5 end_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2008-Apr-29 18:26:54 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2008-Apr-29 18:26:54 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2008-Apr-29 18:26:54 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2008-Apr-29 18:26:54 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-29 18:26:54 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.33065 J 2008-Apr-29 18:26:54 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.6 2008-Apr-29 18:26:54 LOG2 antvel: Parameters to Doppler: Topocentric 80814 2008 120 0.0 2008-Apr-29 18:26:54 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-29 18:26:54 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2008-Apr-29 18:26:54 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2008-Apr-29 18:26:54 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-29 18:26:54 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-29 18:26:54 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Apr-29 18:26:54 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 18:26:54 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-29 18:26:54 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-29 18:26:54 LOG5 begin_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2008-Apr-29 18:26:54 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-29 18:26:54 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.547588 2008.3306466271199 18.999933 2008-Apr-29 18:26:54 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666665 21.883333333333347 2008-Apr-29 18:26:54 LOG4 log_alfabeam: ALFABEAM 1 9.709423020576764 21.850196793352364 2008-Apr-29 18:26:54 LOG4 log_alfabeam: ALFABEAM 2 9.715131570256530 21.792759234798950 2008-Apr-29 18:26:54 LOG4 log_alfabeam: ALFABEAM 3 9.722382215849210 21.825509691124619 2008-Apr-29 18:26:54 LOG4 log_alfabeam: ALFABEAM 4 9.723910152406864 21.916602915555998 2008-Apr-29 18:26:54 LOG4 log_alfabeam: ALFABEAM 5 9.718169516927489 21.974179137489152 2008-Apr-29 18:26:54 LOG4 log_alfabeam: ALFABEAM 6 9.710933193046641 21.940523757485160 2008-Apr-29 18:26:54 INFO2 take_spectra: Starting WAPP+GALFA scan: 812000110 2008-Apr-29 18:26:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-29 18:26:55 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-29 18:26:55 LOG5 begin_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2008-Apr-29 18:26:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-29 18:26:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Apr-29 18:26:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 18:26:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:26:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:26:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80816.00 2008-Apr-29 18:26:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (9.096 > 1.4)! 2008-Apr-29 18:26:56 LOG4 check_wapp_levels: WAPP-1 power levels: 1.282 9.096 1.172 1.181 2008-Apr-29 18:26:56 LOG4 check_wapp_levels: WAPP-2 power levels: 1.364 1.331 1.319 1.169 2008-Apr-29 18:26:56 LOG4 check_wapp_levels: WAPP-3 power levels: 1.289 1.351 1.370 1.182 2008-Apr-29 18:26:56 LOG4 check_wapp_levels: WAPP-4 power levels: 1.371 1.418 1.195 1.260 2008-Apr-29 18:26:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-29 18:26:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:26:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:26:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:26:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:26:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:26:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:26:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:26:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:26:58 INFO5 check_wapp_levels: WAPP power levels are between 1.168 and 8.986 (still bad) 2008-Apr-29 18:27:00 INFO5 check_wapp_levels: WAPP power levels are between 1.169 and 9.087 (still bad) 2008-Apr-29 18:27:02 INFO5 check_wapp_levels: WAPP power levels are between 1.169 and 9.069 (still bad) 2008-Apr-29 18:27:04 INFO5 check_wapp_levels: WAPP power levels are between 1.169 and 9.067 (still bad) 2008-Apr-29 18:27:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-29 18:27:06 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-29 18:27:06 LOG5 end_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2008-Apr-29 18:27:06 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-29 18:27:06 LOG5 end_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2008-Apr-29 18:27:06 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2008-Apr-29 18:27:06 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2008-Apr-29 18:27:06 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2008-Apr-29 18:27:06 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-29 18:27:06 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.33065 J 2008-Apr-29 18:27:06 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.6 2008-Apr-29 18:27:06 LOG2 antvel: Parameters to Doppler: Topocentric 80826 2008 120 0.0 2008-Apr-29 18:27:06 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-29 18:27:06 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2008-Apr-29 18:27:06 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2008-Apr-29 18:27:06 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-29 18:27:06 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-29 18:27:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Apr-29 18:27:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 18:27:06 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-29 18:27:06 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-29 18:27:06 LOG5 begin_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2008-Apr-29 18:27:06 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-29 18:27:06 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.550930 2008.3306470073769 18.999933 2008-Apr-29 18:27:06 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333333 2008-Apr-29 18:27:06 LOG4 log_alfabeam: ALFABEAM 1 9.709424762957200 21.850123231560886 2008-Apr-29 18:27:06 LOG4 log_alfabeam: ALFABEAM 2 9.715136285725562 21.792744003965982 2008-Apr-29 18:27:06 LOG4 log_alfabeam: ALFABEAM 3 9.722385238249615 21.825567140126640 2008-Apr-29 18:27:06 LOG4 log_alfabeam: ALFABEAM 4 9.723908395723738 21.916677065749262 2008-Apr-29 18:27:06 LOG4 log_alfabeam: ALFABEAM 5 9.718164682488712 21.974194832287044 2008-Apr-29 18:27:06 LOG4 log_alfabeam: ALFABEAM 6 9.710930165530780 21.940464424932159 2008-Apr-29 18:27:06 INFO2 take_spectra: Starting WAPP+GALFA scan: 812000111 2008-Apr-29 18:27:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-29 18:27:07 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-29 18:27:07 LOG5 begin_task: Level: (4) ID = <10088> Status = 0 0 0 0 ok 2008-Apr-29 18:27:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-29 18:27:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Apr-29 18:27:07 INFO5 check_wapp_levels: WAPP power levels are between 1.167 and 8.939 (still bad) 2008-Apr-29 18:27:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 18:27:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:27:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:27:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80828.00 2008-Apr-29 18:27:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-29 18:27:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:27:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:27:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:27:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:27:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:27:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:27:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:27:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:27:09 INFO5 check_wapp_levels: WAPP power levels are between 1.168 and 9.099 (still bad) 2008-Apr-29 18:27:11 INFO5 check_wapp_levels: WAPP power levels are between 1.168 and 9.072 (still bad) 2008-Apr-29 18:27:13 INFO5 check_wapp_levels: WAPP power levels are between 1.168 and 9.058 (still bad) 2008-Apr-29 18:27:15 INFO5 check_wapp_levels: WAPP power levels are between 1.167 and 9.057 (still bad) 2008-Apr-29 18:27:17 INFO5 check_wapp_levels: WAPP power levels are between 1.167 and 9.066 (still bad) 2008-Apr-29 18:27:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-29 18:27:18 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-29 18:27:18 LOG5 end_task: Level: (4) ID = <10088> Status = 0 0 0 0 ok 2008-Apr-29 18:27:18 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-29 18:27:18 LOG5 end_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2008-Apr-29 18:27:18 INFO2 smartfreq: Switching off CAL 2008-Apr-29 18:27:18 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-29 18:27:18 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-29 18:27:18 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-29 18:27:18 LOG5 begin_task: Level: (3) ID = <10089> Status = 0 0 0 0 ok 2008-Apr-29 18:27:18 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-29 18:27:18 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-29 18:27:18 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-29 18:27:18 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-29 18:27:18 LOG5 end_task: Level: (3) ID = <10089> Status = 0 0 0 0 ok 2008-Apr-29 18:27:18 INFO3 restore_frequencies: Restoring original frequencies 2008-Apr-29 18:27:18 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-29 18:27:18 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.33065 J 2008-Apr-29 18:27:18 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.6 2008-Apr-29 18:27:18 LOG2 antvel: Parameters to Doppler: Topocentric 80838 2008 120 0.0 2008-Apr-29 18:27:18 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-29 18:27:18 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.2 rest0=1381.2 rest1=1381.2 rest2=1381.2 rest3=1381.2 rest4=1381.2 rest5=1381.2 rest6=1381.2 rest7=1381.2 2008-Apr-29 18:27:18 INFO4 dopset_gen: New sky frequencies: 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 2008-Apr-29 18:27:18 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.200000 sky0=1381.200000 sky1=1381.200000 sky2=1381.200000 sky3=1381.200000 sky4=1381.200000 sky5=1381.200000 sky6=1381.200000 sky7=1381.200000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-29 18:27:18 LOG2 dopset_gen: Result from 'sky2syn': 1631.200000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-29 18:27:18 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2008-Apr-29 18:27:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 18:27:18 STOP finish_task: Finishing task 'smart frequency switching' 2008-Apr-29 18:27:18 LOG5 finish_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2008-Apr-29 18:27:18 DONE finish_task: DONE finished pattern: smart frequency switching 2008-Apr-29 18:27:18 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-29 18:27:18 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2008-Apr-29 18:27:18 LOG5 end_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2008-Apr-29 18:27:18 NOTE run_command_file: DONE with command file processing 2008-Apr-29 18:27:18 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2008-Apr-29 18:27:18 STOP finish_task: Finishing task 'running command file 'command_galfasrc.cmd'' 2008-Apr-29 18:27:18 LOG5 finish_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Apr-29 18:27:18 DONE finish_task: DONE finished running: command file 'command_galfasrc.cmd' 2008-Apr-29 18:27:19 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-29 18:27:19 END end_task: Finishing task 'running command file 'command_galfasrc.cmd'' with status 'OK' 2008-Apr-29 18:27:19 LOG5 end_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Apr-29 18:27:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2008-Apr-29 18:27:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 18:27:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:27:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:27:19 INFO5 check_wapp_levels: WAPP power levels are between 1.167 and 9.070 (still bad) 2008-Apr-29 18:27:43 INFO1 CIMA-run_command_file: Transferring command file '080429_obs.cmd ' to executive ... 2008-Apr-29 18:27:44 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 3 {LOAD ages_config.conf} 2008-Apr-29 18:27:44 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 4 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5} 2008-Apr-29 18:27:44 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {FIXEDDRIFT az=245.79 alfaangle=-49.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p1_002 ra=95300.00 dec=235130.00} 2008-Apr-29 18:27:44 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 11 {FIXEDDRIFT az=235.63 alfaangle=-35.7 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p1_004 ra=95300.00 dec=234830.00} 2008-Apr-29 18:27:44 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 15 {FIXEDDRIFT az=208.91 alfaangle=-7.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p1_006 ra=95300.00 dec=234530.00} 2008-Apr-29 18:27:44 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 19 {FIXEDDRIFT az=150.85 alfaangle=45.7 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p1_008 ra=95300.00 dec=234230.00} 2008-Apr-29 18:27:44 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 23 {FIXEDDRIFT az=123.63 alfaangle=74.7 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p1_010 ra=95300.00 dec=233930.00} 2008-Apr-29 18:27:44 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 27 {FIXEDDRIFT az=113.28 alfaangle=88.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p1_012 ra=95300.00 dec=233630.00} 2008-Apr-29 18:27:44 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 31 {FIXEDDRIFT az=312.57 alfaangle=59.5 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_058 ra=120900.00 dec=73430.00} 2008-Apr-29 18:27:44 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 35 {FIXEDDRIFT az=332.04 alfaangle=42.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_060 ra=120900.00 dec=73130.00} 2008-Apr-29 18:27:44 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 39 {FIXEDDRIFT az=0.00 alfaangle=19.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_062 ra=120900.00 dec=72830.00} 2008-Apr-29 18:27:44 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 43 {FIXEDDRIFT az=27.75 alfaangle=-4.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_064 ra=120900.00 dec=72530.00} 2008-Apr-29 18:27:44 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 47 {FIXEDDRIFT az=46.90 alfaangle=-20.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_066 ra=120900.00 dec=72230.00} 2008-Apr-29 18:27:44 LOG4 exec_msg: From OBSERVER: store_command_file_line 14 51 {FIXEDDRIFT az=47.49 alfaangle=-21.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p1_067 ra=122900.00 dec=72100.00} 2008-Apr-29 18:27:44 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-Apr-29 18:27:44 LOG4 exec_msg: From OBSERVER: run_command_file 080429_obs.cmd 1 1 14 2008-Apr-29 18:27:44 LOG4 run_command_file: Calling 'run_command_file 080429_obs.cmd 1 1 14' 2008-Apr-29 18:27:44 BEGIN begin_task: Starting task 'running command file '080429_obs.cmd'' 2008-Apr-29 18:27:44 LOG5 begin_task: Level: (1) ID = <10090> Status = 0 0 0 0 ok 2008-Apr-29 18:27:44 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '080429_obs.cmd' ...} 2008-Apr-29 18:27:44 NOTE run_command_file: Starting execution of command file '080429_obs.cmd' from line 1 2008-Apr-29 18:27:44 COMMAND run_command_line: EXECUTING command 3: 'LOAD ages_config.conf' 2008-Apr-29 18:27:44 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2008-Apr-29 18:27:44 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-29 18:27:44 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2008-Apr-29 18:27:44 NOTE CIMA-load_config_file: Loading configuration file 'ages_config.conf' 2008-Apr-29 18:27:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Apr-29 18:27:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Apr-29 18:27:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Apr-29 18:27:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Apr-29 18:27:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Apr-29 18:27:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2008-Apr-29 18:27:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Apr-29 18:27:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786" 2008-Apr-29 18:27:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786" 2008-Apr-29 18:27:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786" 2008-Apr-29 18:27:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786" 2008-Apr-29 18:27:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786" 2008-Apr-29 18:27:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786" 2008-Apr-29 18:27:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786" 2008-Apr-29 18:27:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786" 2008-Apr-29 18:27:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786" 2008-Apr-29 18:27:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Apr-29 18:27:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Apr-29 18:27:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Apr-29 18:27:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Apr-29 18:27:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Apr-29 18:27:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Apr-29 18:27:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Apr-29 18:27:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Apr-29 18:27:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Apr-29 18:27:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Apr-29 18:27:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Apr-29 18:27:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Apr-29 18:27:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Apr-29 18:27:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2008-Apr-29 18:27:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Apr-29 18:27:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Apr-29 18:27:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Apr-29 18:27:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Apr-29 18:27:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Apr-29 18:27:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Apr-29 18:27:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Apr-29 18:27:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Apr-29 18:27:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Apr-29 18:27:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1670.405752" 2008-Apr-29 18:27:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Apr-29 18:27:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Apr-29 18:27:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Apr-29 18:27:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Apr-29 18:27:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Apr-29 18:27:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Apr-29 18:27:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Apr-29 18:27:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Apr-29 18:27:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Apr-29 18:27:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Apr-29 18:27:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Apr-29 18:27:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Apr-29 18:27:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Apr-29 18:27:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Apr-29 18:27:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Apr-29 18:27:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Apr-29 18:27:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Apr-29 18:27:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Apr-29 18:27:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Apr-29 18:27:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Apr-29 18:27:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Apr-29 18:27:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Apr-29 18:27:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Apr-29 18:27:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Apr-29 18:27:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Apr-29 18:27:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Apr-29 18:27:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Apr-29 18:27:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Apr-29 18:27:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Apr-29 18:27:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Apr-29 18:27:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Apr-29 18:27:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Apr-29 18:27:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Apr-29 18:27:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Apr-29 18:27:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Apr-29 18:27:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Apr-29 18:27:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Apr-29 18:27:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Apr-29 18:27:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Apr-29 18:27:46 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-29 18:27:46 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Apr-29 18:27:46 LOG5 begin_task: Level: (2) ID = <10091> Status = 0 0 0 0 ok 2008-Apr-29 18:27:46 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Apr-29 18:27:46 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Apr-29 18:27:46 LOG1 config_iflo: Receiver ALFA already selected 2008-Apr-29 18:27:46 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-29 18:27:46 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-29 18:27:46 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-29 18:27:46 LOG5 begin_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2008-Apr-29 18:27:46 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-29 18:27:46 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-29 18:27:46 LOG5 end_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2008-Apr-29 18:27:46 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-29 18:27:46 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-29 18:27:46 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2008-Apr-29 18:27:46 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2008-Apr-29 18:27:46 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Apr-29 18:27:46 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Apr-29 18:27:46 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2008-Apr-29 18:27:46 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2008-Apr-29 18:27:46 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2008-Apr-29 18:27:46 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1670405752.0} 2008-Apr-29 18:27:46 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2008-Apr-29 18:27:46 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2008-Apr-29 18:27:46 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Apr-29 18:27:46 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Apr-29 18:27:46 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Apr-29 18:27:46 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Apr-29 18:27:46 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Apr-29 18:27:46 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2008-Apr-29 18:27:46 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2008-Apr-29 18:27:46 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2008-Apr-29 18:27:46 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2008-Apr-29 18:27:46 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Apr-29 18:27:46 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2008-Apr-29 18:27:46 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2008-Apr-29 18:27:46 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Apr-29 18:27:46 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 18:27:46 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2008-Apr-29 18:27:46 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2008-Apr-29 18:27:46 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Apr-29 18:27:46 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2008-Apr-29 18:27:46 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2008-Apr-29 18:27:46 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Apr-29 18:27:46 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 18:27:46 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Apr-29 18:27:46 LOG5 begin_task: Level: (3) ID = <10093> Status = 0 0 0 0 ok 2008-Apr-29 18:27:46 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1670405752.0} 2008-Apr-29 18:27:46 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Apr-29 18:27:46 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 18:27:46 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 18:27:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:27:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:27:47 LOG4 got_cormsg: From DATATAKING: vw% DONE 2008-Apr-29 18:27:47 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Apr-29 18:27:47 LOG5 end_task: Level: (3) ID = <10093> Status = 0 0 0 0 ok 2008-Apr-29 18:27:47 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Apr-29 18:27:47 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Apr-29 18:27:47 LOG5 finish_task: Level: (2) ID = <10091> Status = 0 0 0 0 ok 2008-Apr-29 18:27:47 DONE finish_task: DONE finished configuration: IF/LO path 2008-Apr-29 18:27:47 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-29 18:27:47 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Apr-29 18:27:47 LOG5 end_task: Level: (2) ID = <10091> Status = 0 0 0 0 ok 2008-Apr-29 18:27:47 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Apr-29 18:27:47 LOG5 begin_task: Level: (2) ID = <10094> Status = 0 0 0 0 ok 2008-Apr-29 18:27:47 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Apr-29 18:27:47 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Apr-29 18:27:47 START begin_task: Starting task 'selecting calibration port' 2008-Apr-29 18:27:47 LOG5 begin_task: Level: (3) ID = <10095> Status = 0 0 0 0 ok 2008-Apr-29 18:27:47 LOG3 vw_send: To DATATAKING: calport 3 2008-Apr-29 18:27:47 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Apr-29 18:27:47 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 18:27:47 START begin_task: Starting task 'waiting on calport' 2008-Apr-29 18:27:47 LOG5 begin_task: Level: (4) ID = <10096> Status = 0 0 0 0 ok 2008-Apr-29 18:27:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:27:47 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Apr-29 18:27:47 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 18:27:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:27:47 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-29 18:27:47 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Apr-29 18:27:47 LOG5 end_task: Level: (4) ID = <10096> Status = 0 0 0 0 ok 2008-Apr-29 18:27:47 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Apr-29 18:27:47 STOP finish_task: Finishing task 'selecting calibration port' 2008-Apr-29 18:27:47 LOG5 finish_task: Level: (3) ID = <10095> Status = 0 0 0 0 ok 2008-Apr-29 18:27:47 INFO2 finish_task: DONE finished configuring: calibration port 2008-Apr-29 18:27:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 18:27:47 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Apr-29 18:27:47 LOG5 end_task: Level: (3) ID = <10095> Status = 0 0 0 0 ok 2008-Apr-29 18:27:47 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Apr-29 18:27:47 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Apr-29 18:27:47 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Apr-29 18:27:47 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Apr-29 18:27:48 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Apr-29 18:27:48 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Apr-29 18:27:48 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Apr-29 18:27:48 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Apr-29 18:27:48 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Karen O'Neil 2008-Apr-29 18:27:48 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Karen O'Neil 2008-Apr-29 18:27:48 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Karen O'Neil 2008-Apr-29 18:27:48 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Karen O'Neil 2008-Apr-29 18:27:48 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Apr-29 18:27:48 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Apr-29 18:27:48 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-29 18:27:48 LOG5 begin_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2008-Apr-29 18:27:48 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Apr-29 18:27:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:27:48 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-29 18:27:48 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Apr-29 18:27:48 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-29 18:27:48 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Karen O'Neil' 2008-Apr-29 18:27:48 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-29 18:27:48 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-29 18:27:48 LOG5 end_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2008-Apr-29 18:27:48 LOG3 sock_errsend: To WAPPDATA: FLUSH 2008-Apr-29 18:27:48 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Apr-29 18:27:48 LOG5 finish_task: Level: (2) ID = <10094> Status = 0 0 0 0 ok 2008-Apr-29 18:27:48 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Apr-29 18:27:48 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-29 18:27:48 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Apr-29 18:27:48 LOG5 end_task: Level: (2) ID = <10094> Status = 0 0 0 0 ok 2008-Apr-29 18:27:48 COMMAND run_command_line: EXECUTING command 4: 'SETUP FIXEDDRIFT calwhen=tracking calsecs=5' 2008-Apr-29 18:27:48 COMMAND run_command_line: EXECUTING command 7: 'FIXEDDRIFT az=245.79 alfaangle=-49.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p1_002 ra=95300.00 dec=235130.00' 2008-Apr-29 18:27:48 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-29 18:27:48 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Apr-29 18:27:49 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-29 18:27:49 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 245.79 -49.1 hcorcal 5 tracking no first 1 AGES3193_p1_002 95300.00 235130.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-29 18:27:49 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-29 18:27:49 LOG5 begin_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2008-Apr-29 18:27:49 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'galfasrc' 2008-Apr-29 18:27:49 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-29 18:27:49 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p1_002} 2008-Apr-29 18:27:49 INFO3 fixed_driftmap: Sending telescope to Az = 245.79 and ZA = 14.80 2008-Apr-29 18:27:49 LOG3 track_source: Calling 'track_source AGES3193_p1_002 245.79 14.7994960738 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-29 18:27:49 START begin_task: Starting task 'sending tracking commands' 2008-Apr-29 18:27:49 LOG5 begin_task: Level: (3) ID = <10099> Status = 0 0 0 0 ok 2008-Apr-29 18:27:49 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p1_002} INFO {Slewing to source 'AGES3193_p1_002' ...} 2008-Apr-29 18:27:49 INFO1 track_source: Starting to track AGES3193_p1_002 2008-Apr-29 18:27:49 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p1_002" 2008-Apr-29 18:27:49 LOG3 vw_send: To DATATAKING: set ra 245.79 2008-Apr-29 18:27:49 LOG3 vw_send: To DATATAKING: set dec 14.7994960738 2008-Apr-29 18:27:49 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-29 18:27:49 LOG3 vw_send: To DATATAKING: pnt tr 245.79 14.7994960738 -CF 2008-Apr-29 18:27:49 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-29 18:27:49 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-29 18:27:49 LOG5 finish_task: Level: (3) ID = <10099> Status = 0 0 0 0 ok 2008-Apr-29 18:27:49 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-29 18:27:49 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 18:27:49 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-29 18:27:49 LOG5 end_task: Level: (3) ID = <10099> Status = 0 0 0 0 ok 2008-Apr-29 18:27:49 START begin_task: Starting task 'rotate ALFA to -49.1 degrees' 2008-Apr-29 18:27:49 LOG5 begin_task: Level: (3) ID = <10100> Status = 0 0 0 0 ok 2008-Apr-29 18:27:49 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -49.1 degrees ...} 2008-Apr-29 18:27:49 INFO2 rotate_alfa: ALFA commanded to -49.1 degrees 2008-Apr-29 18:27:49 LOG3 sock_errsend: To ALFAMOTOR: POSITION -49.1 REPLY 2008-Apr-29 18:27:49 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-29 18:27:49 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-29 18:27:49 LOG5 begin_task: Level: (4) ID = <10101> Status = 0 0 0 0 ok 2008-Apr-29 18:27:49 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p1_002" 2008-Apr-29 18:27:49 LOG4 got_cormsg: From DATATAKING: set ra 245.79 2008-Apr-29 18:27:50 LOG4 got_cormsg: From DATATAKING: set dec 14.7994960738 2008-Apr-29 18:27:50 LOG4 got_cormsg: From DATATAKING: vw% 245.79 2008-Apr-29 18:27:50 LOG4 got_cormsg: From DATATAKING: vw% 14.7994960738 2008-Apr-29 18:27:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:27:50 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-29 18:27:50 LOG4 got_cormsg: From DATATAKING: pnt tr 245.79 14.7994960738 -CF 2008-Apr-29 18:27:50 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-29 18:27:50 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-29 18:27:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:28:28 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-29 18:28:28 INFO3 alfa_motor: ALFA rotator in-position -49.10 degrees 2008-Apr-29 18:28:28 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-29 18:28:28 LOG5 end_task: Level: (4) ID = <10101> Status = 0 0 0 0 ok 2008-Apr-29 18:28:28 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-29 18:28:28 STOP finish_task: Finishing task 'rotate ALFA to -49.1 degrees' 2008-Apr-29 18:28:28 LOG5 finish_task: Level: (3) ID = <10100> Status = 0 0 0 0 ok 2008-Apr-29 18:28:28 INFO2 finish_task: DONE finished configuration: rotating ALFA to -49.1 degrees 2008-Apr-29 18:28:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 18:28:28 STOP end_task: Finishing task 'rotate ALFA to -49.1 degrees' with status 'OK' 2008-Apr-29 18:28:28 LOG5 end_task: Level: (3) ID = <10100> Status = 0 0 0 0 ok 2008-Apr-29 18:28:28 START begin_task: Starting task 'waiting on telescope' 2008-Apr-29 18:28:28 LOG5 begin_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2008-Apr-29 18:28:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-29 18:28:28 LOG3 waittrk: Start waittrk 5 2008-Apr-29 18:28:28 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-29 18:28:28 LOG5 begin_task: Level: (4) ID = <10103> Status = 0 0 0 0 ok 2008-Apr-29 18:28:33 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-29 18:28:33 LOG5 end_task: Level: (4) ID = <10103> Status = 0 0 0 0 ok 2008-Apr-29 18:28:33 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-29 18:28:33 LOG5 begin_task: Level: (4) ID = <10104> Status = 0 0 0 0 ok 2008-Apr-29 18:28:45 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-29 18:28:45 LOG5 end_task: Level: (4) ID = <10104> Status = 0 0 0 0 ok 2008-Apr-29 18:28:45 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-29 18:28:45 INFO2 waittrk: Now tracking AGES3193_p1_002 2008-Apr-29 18:28:45 LOG4 waittrk: Current telescope position: Az = 245.35 ZA = 14.81 2008-Apr-29 18:28:45 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-29 18:28:45 LOG5 finish_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2008-Apr-29 18:28:45 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-29 18:28:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 18:28:45 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-29 18:28:45 LOG5 end_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2008-Apr-29 18:28:45 START begin_task: Starting task 'selecting calibration type' 2008-Apr-29 18:28:45 LOG5 begin_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2008-Apr-29 18:28:45 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-29 18:28:45 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-29 18:28:45 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 18:28:45 START begin_task: Starting task 'waiting on setcal' 2008-Apr-29 18:28:45 LOG5 begin_task: Level: (4) ID = <10106> Status = 0 0 0 0 ok 2008-Apr-29 18:28:45 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-29 18:28:45 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 18:28:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:28:46 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-29 18:28:46 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-29 18:28:46 LOG5 end_task: Level: (4) ID = <10106> Status = 0 0 0 0 ok 2008-Apr-29 18:28:46 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-29 18:28:46 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-29 18:28:46 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-29 18:28:46 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-29 18:28:46 LOG5 begin_task: Level: (4) ID = <10107> Status = 0 0 0 0 ok 2008-Apr-29 18:28:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:28:46 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-29 18:28:46 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-29 18:28:46 LOG5 end_task: Level: (4) ID = <10107> Status = 0 0 0 0 ok 2008-Apr-29 18:28:46 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-29 18:28:46 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-29 18:28:46 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-29 18:28:46 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-29 18:28:46 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-29 18:28:46 LOG5 begin_task: Level: (4) ID = <10108> Status = 0 0 0 0 ok 2008-Apr-29 18:28:46 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-29 18:28:46 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-29 18:28:46 LOG5 end_task: Level: (4) ID = <10108> Status = 0 0 0 0 ok 2008-Apr-29 18:28:46 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-29 18:28:46 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-29 18:28:46 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-29 18:28:46 LOG5 finish_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2008-Apr-29 18:28:46 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-29 18:28:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 18:28:46 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-29 18:28:46 LOG5 end_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2008-Apr-29 18:28:46 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2008-Apr-29 18:28:46 INFO2 astwait: Waiting for 1122 seconds from 22:28:46 to 22:47:28 UTC ... 2008-Apr-29 18:28:46 LOG4 send_obs_status: To obs_status: <1> TASKTIME 1122 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-29 18:28:46 START begin_task: Starting task 'waiting on waiting for AST time' 2008-Apr-29 18:28:46 LOG5 begin_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2008-Apr-29 18:47:28 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2008-Apr-29 18:47:28 LOG5 end_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2008-Apr-29 18:47:28 INFO3 astwait: Finished waiting 2008-Apr-29 18:47:28 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-29 18:47:28 LOG5 dopset_later: Calling 'dopset_later 60.636448473606016' 2008-Apr-29 18:47:28 INFO3 dopset_later: Setting Doppler correction for 18:48:28 (60.6 seconds from now) 2008-Apr-29 18:47:28 LOG5 antvel: Calling 'antvel 245.790000 14.799496 F 60.636448473606016' 2008-Apr-29 18:47:28 LOG2 antvel: Parameters to Doppler: Heliocentric 82108 2008 120 0.0 2008-Apr-29 18:47:28 INFO5 antvel: Computed antenna velocity: +28.21080 km/s 2008-Apr-29 18:47:28 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=28.210798720500001 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-29 18:47:28 INFO4 dopset_gen: New sky frequencies: 1381.113464 1381.113464 1381.113464 1381.113464 1381.113464 1381.113464 1381.113464 1381.113464 1381.113464 2008-Apr-29 18:47:28 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.113464 sky0=1381.113464 sky1=1381.113464 sky2=1381.113464 sky3=1381.113464 sky4=1381.113464 sky5=1381.113464 sky6=1381.113464 sky7=1381.113464 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-29 18:47:28 LOG2 dopset_gen: Result from 'sky2syn': 1631.113464 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-29 18:47:28 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631113464.0} 2008-Apr-29 18:47:28 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 18:47:28 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-29 18:47:28 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-29 18:47:28 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:03.3 Dec = +23:51:32.5 2008-Apr-29 18:47:28 LOG3 track_source: Calling 'track_source AGES3193_p1_002 095203.3 235132.5 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-29 18:47:28 START begin_task: Starting task 'sending tracking commands' 2008-Apr-29 18:47:28 LOG5 begin_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2008-Apr-29 18:47:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p1_002} INFO {Slewing to source 'AGES3193_p1_002' ...} 2008-Apr-29 18:47:28 INFO1 track_source: Starting to track AGES3193_p1_002 2008-Apr-29 18:47:28 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p1_002" 2008-Apr-29 18:47:28 LOG3 vw_send: To DATATAKING: set ra 095203.3 2008-Apr-29 18:47:28 LOG3 vw_send: To DATATAKING: set dec 235132.5 2008-Apr-29 18:47:28 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-29 18:47:28 LOG3 vw_send: To DATATAKING: pnt tr 095203.3 235132.5 -CJ 2008-Apr-29 18:47:28 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-29 18:47:28 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-29 18:47:28 LOG5 finish_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2008-Apr-29 18:47:28 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-29 18:47:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 18:47:28 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-29 18:47:28 LOG5 end_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2008-Apr-29 18:47:28 START begin_task: Starting task 'waiting on telescope' 2008-Apr-29 18:47:28 LOG5 begin_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2008-Apr-29 18:47:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-29 18:47:28 LOG3 waittrk: Start waittrk 5 2008-Apr-29 18:47:28 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-29 18:47:28 LOG5 begin_task: Level: (4) ID = <10112> Status = 0 0 0 0 ok 2008-Apr-29 18:47:28 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631113464.0} 2008-Apr-29 18:47:28 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 18:47:28 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p1_002" 2008-Apr-29 18:47:28 LOG4 got_cormsg: From DATATAKING: set ra 095203.3 2008-Apr-29 18:47:28 LOG4 got_cormsg: From DATATAKING: set dec 235132.5 2008-Apr-29 18:47:28 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-29 18:47:28 LOG4 got_cormsg: From DATATAKING: vw% 095203.3 2008-Apr-29 18:47:28 LOG4 got_cormsg: From DATATAKING: vw% 235132.5 2008-Apr-29 18:47:28 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:47:28 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-29 18:47:28 LOG4 got_cormsg: From DATATAKING: pnt tr 095203.3 235132.5 -CJ 2008-Apr-29 18:47:28 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-29 18:47:28 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-29 18:47:28 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:47:33 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-29 18:47:33 LOG5 end_task: Level: (4) ID = <10112> Status = 0 0 0 0 ok 2008-Apr-29 18:47:33 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-29 18:47:33 LOG5 begin_task: Level: (4) ID = <10113> Status = 0 0 0 0 ok 2008-Apr-29 18:47:35 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-29 18:47:35 LOG5 end_task: Level: (4) ID = <10113> Status = 0 0 0 0 ok 2008-Apr-29 18:47:35 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-29 18:47:35 INFO2 waittrk: Now tracking AGES3193_p1_002 2008-Apr-29 18:47:35 LOG4 waittrk: Current telescope position: Az = 245.32 ZA = 14.80 2008-Apr-29 18:47:35 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-29 18:47:35 LOG5 finish_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2008-Apr-29 18:47:35 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-29 18:47:35 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 18:47:35 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-29 18:47:35 LOG5 end_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2008-Apr-29 18:47:35 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-29 18:47:35 LOG5 begin_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2008-Apr-29 18:47:35 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-29 18:47:35 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-29 18:47:35 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-29 18:47:35 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-29 18:47:35 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 18:47:35 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-29 18:47:35 LOG5 begin_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2008-Apr-29 18:47:36 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-29 18:47:36 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 18:47:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:47:39 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-29 18:47:39 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-29 18:47:39 LOG5 end_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2008-Apr-29 18:47:39 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-29 18:47:39 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-29 18:47:39 LOG5 begin_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2008-Apr-29 18:47:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-29 18:47:39 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-29 18:47:39 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-29 18:47:39 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-29 18:47:39 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-29 18:47:39 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-29 18:47:39 LOG5 begin_task: Level: (5) ID = <10117> Status = 0 0 0 0 ok 2008-Apr-29 18:47:39 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-29 18:47:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:47:39 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 0 dB --- beam 1: 7 6 dB 2008-Apr-29 18:47:39 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 3 dB --- beam 5: 6 5 dB 2008-Apr-29 18:47:39 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-29 18:47:39 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 3 2 dB 2008-Apr-29 18:47:39 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-29 18:47:39 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-29 18:47:39 LOG5 end_task: Level: (5) ID = <10117> Status = 0 0 0 0 ok 2008-Apr-29 18:47:39 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.955 0.853 ALFA beam 1: 1.091 1.015 2008-Apr-29 18:47:39 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.983 0.908 ALFA beam 3: 0.926 1.000 2008-Apr-29 18:47:39 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.091 0.898 ALFA beam 5: 0.993 1.131 2008-Apr-29 18:47:39 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.025 0.994 ALFA beam 7: 0.893 1.102 2008-Apr-29 18:47:39 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-29 18:47:39 LOG5 finish_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2008-Apr-29 18:47:39 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-29 18:47:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 18:47:39 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-29 18:47:39 LOG5 end_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2008-Apr-29 18:47:39 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-29 18:47:39 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-29 18:47:39 LOG5 finish_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2008-Apr-29 18:47:39 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-29 18:47:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 18:47:39 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-29 18:47:39 LOG5 end_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2008-Apr-29 18:47:39 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Karen O'Neil 2008-Apr-29 18:47:39 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Karen O'Neil 2008-Apr-29 18:47:40 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Karen O'Neil 2008-Apr-29 18:47:40 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Karen O'Neil 2008-Apr-29 18:47:40 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-29 18:47:40 START begin_task: Starting task 'WAPP calibration' 2008-Apr-29 18:47:40 LOG5 begin_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2008-Apr-29 18:47:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-29 18:47:40 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-29 18:47:40 START begin_task: Starting task 'selecting calibration type' 2008-Apr-29 18:47:40 LOG5 begin_task: Level: (4) ID = <10119> Status = 0 0 0 0 ok 2008-Apr-29 18:47:40 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-29 18:47:40 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-29 18:47:40 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 18:47:40 START begin_task: Starting task 'waiting on setcal' 2008-Apr-29 18:47:40 LOG5 begin_task: Level: (5) ID = <10120> Status = 0 0 0 0 ok 2008-Apr-29 18:47:40 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Karen O'Neil' 2008-Apr-29 18:47:40 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-29 18:47:40 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 18:47:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:47:40 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-29 18:47:40 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-29 18:47:40 LOG5 end_task: Level: (5) ID = <10120> Status = 0 0 0 0 ok 2008-Apr-29 18:47:40 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-29 18:47:40 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-29 18:47:40 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-29 18:47:40 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-29 18:47:40 LOG5 begin_task: Level: (5) ID = <10121> Status = 0 0 0 0 ok 2008-Apr-29 18:47:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:47:40 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-29 18:47:40 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-29 18:47:40 LOG5 end_task: Level: (5) ID = <10121> Status = 0 0 0 0 ok 2008-Apr-29 18:47:40 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-29 18:47:40 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-29 18:47:40 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-29 18:47:40 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-29 18:47:40 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-29 18:47:40 LOG5 begin_task: Level: (5) ID = <10122> Status = 0 0 0 0 ok 2008-Apr-29 18:47:40 NOTE WAPPDATA-new_file: New FITS file: wapp.20080429.a2048.0001.fits 2008-Apr-29 18:47:40 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-29 18:47:40 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-29 18:47:40 LOG5 end_task: Level: (5) ID = <10122> Status = 0 0 0 0 ok 2008-Apr-29 18:47:40 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-29 18:47:40 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-29 18:47:40 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-29 18:47:40 LOG5 finish_task: Level: (4) ID = <10119> Status = 0 0 0 0 ok 2008-Apr-29 18:47:40 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-29 18:47:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 18:47:40 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-29 18:47:40 LOG5 end_task: Level: (4) ID = <10119> Status = 0 0 0 0 ok 2008-Apr-29 18:47:40 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-29 18:47:40 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-29 18:47:40 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-29 18:47:40 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-29 18:47:40 LOG5 begin_task: Level: (4) ID = <10123> Status = 0 0 0 0 ok 2008-Apr-29 18:47:40 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080429.a2048.0001.fits} 2008-Apr-29 18:47:40 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-29 18:47:40 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-29 18:47:40 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-29 18:47:40 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-29 18:47:40 LOG5 end_task: Level: (4) ID = <10123> Status = 0 0 0 0 ok 2008-Apr-29 18:47:40 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-29 18:47:40 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-29 18:47:40 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-29 18:47:40 LOG5 begin_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2008-Apr-29 18:47:40 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-29 18:47:40 LOG5 log_alfabeam: Parameters: 9.867583333333334 23.859027777777779 8.894646 2008.3306861104772 -49.100075 2008-Apr-29 18:47:40 LOG4 log_alfabeam: ALFABEAM 0 9.867583333333332 23.859027777777779 2008-Apr-29 18:47:40 LOG4 log_alfabeam: ALFABEAM 1 9.868297010808888 23.767614612311082 2008-Apr-29 18:47:40 LOG4 log_alfabeam: ALFABEAM 2 9.874556927808905 23.828249443520509 2008-Apr-29 18:47:40 LOG4 log_alfabeam: ALFABEAM 3 9.873820001604001 23.920216510969638 2008-Apr-29 18:47:40 LOG4 log_alfabeam: ALFABEAM 4 9.866826153072504 23.950493583396923 2008-Apr-29 18:47:40 LOG4 log_alfabeam: ALFABEAM 5 9.860605249708886 23.889053877984527 2008-Apr-29 18:47:40 LOG4 log_alfabeam: ALFABEAM 6 9.861339002414541 23.798140890759061 2008-Apr-29 18:47:40 INFO2 take_spectra: Starting WAPP scan: 812000112 2008-Apr-29 18:47:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-29 18:47:41 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-29 18:47:41 LOG5 begin_task: Level: (5) ID = <10125> Status = 0 0 0 0 ok 2008-Apr-29 18:47:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-29 18:47:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82062.00 2008-Apr-29 18:47:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.113464 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-29 18:47:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.113464 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:47:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.113464 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:47:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.113464 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:47:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.113464 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:47:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.113464 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:47:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.113464 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:47:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.113464 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:47:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.113464 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:47:47 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-29 18:47:47 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-29 18:47:47 LOG5 end_task: Level: (5) ID = <10125> Status = 0 0 0 0 ok 2008-Apr-29 18:47:47 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-29 18:47:47 LOG5 end_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2008-Apr-29 18:47:47 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-29 18:47:47 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-29 18:47:47 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-29 18:47:47 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-29 18:47:47 LOG5 begin_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2008-Apr-29 18:47:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.516 > 1.4)! 2008-Apr-29 18:47:47 LOG4 check_wapp_levels: WAPP-1 power levels: 1.294 0.940 1.470 1.381 2008-Apr-29 18:47:47 LOG4 check_wapp_levels: WAPP-2 power levels: 1.330 1.251 1.267 1.385 2008-Apr-29 18:47:47 LOG4 check_wapp_levels: WAPP-3 power levels: 1.511 1.239 1.360 1.493 2008-Apr-29 18:47:47 LOG4 check_wapp_levels: WAPP-4 power levels: 1.404 1.369 1.223 1.516 2008-Apr-29 18:47:48 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-29 18:47:48 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-29 18:47:48 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-29 18:47:48 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-29 18:47:48 LOG5 end_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2008-Apr-29 18:47:48 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-29 18:47:48 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-29 18:47:48 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-29 18:47:48 LOG5 begin_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2008-Apr-29 18:47:48 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-29 18:47:48 LOG5 log_alfabeam: Parameters: 9.867583333333334 23.859027777777779 8.896596 2008.3306863322939 -49.100075 2008-Apr-29 18:47:48 LOG4 log_alfabeam: ALFABEAM 0 9.867583333333332 23.859027777777790 2008-Apr-29 18:47:48 LOG4 log_alfabeam: ALFABEAM 1 9.868302182565525 23.767622350079691 2008-Apr-29 18:47:48 LOG4 log_alfabeam: ALFABEAM 2 9.874558681431077 23.828323689422167 2008-Apr-29 18:47:48 LOG4 log_alfabeam: ALFABEAM 3 9.873816497590164 23.920283752713686 2008-Apr-29 18:47:48 LOG4 log_alfabeam: ALFABEAM 4 9.866820894759440 23.950485473755776 2008-Apr-29 18:47:48 LOG4 log_alfabeam: ALFABEAM 5 9.860603540100346 23.888978360411176 2008-Apr-29 18:47:48 LOG4 log_alfabeam: ALFABEAM 6 9.861342464801757 23.798074209964707 2008-Apr-29 18:47:48 INFO2 take_spectra: Starting WAPP scan: 812000113 2008-Apr-29 18:47:48 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-29 18:47:48 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-29 18:47:48 LOG5 begin_task: Level: (5) ID = <10128> Status = 0 0 0 0 ok 2008-Apr-29 18:47:48 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-29 18:47:48 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82069.00 2008-Apr-29 18:47:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.113464 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-29 18:47:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.113464 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:47:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.113464 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:47:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.113464 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:47:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.113464 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:47:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.113464 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:47:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.113464 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:47:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.113464 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:47:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.113464 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:47:54 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-29 18:47:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-29 18:47:54 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-29 18:47:54 LOG5 end_task: Level: (5) ID = <10128> Status = 0 0 0 0 ok 2008-Apr-29 18:47:54 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-29 18:47:54 LOG5 end_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2008-Apr-29 18:47:54 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-29 18:47:54 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-29 18:47:54 LOG5 finish_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2008-Apr-29 18:47:54 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-29 18:47:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 18:47:54 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-29 18:47:54 LOG5 end_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2008-Apr-29 18:47:55 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-29 18:47:55 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 245.79 and ZA = 14.80 2008-Apr-29 18:47:55 LOG3 track_source: Calling 'track_source AGES3193_p1_002 245.79 14.7994960738 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-29 18:47:55 START begin_task: Starting task 'sending tracking commands' 2008-Apr-29 18:47:55 LOG5 begin_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2008-Apr-29 18:47:55 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p1_002} INFO {Slewing to source 'AGES3193_p1_002' ...} 2008-Apr-29 18:47:55 INFO1 track_source: Starting to track AGES3193_p1_002 2008-Apr-29 18:47:55 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p1_002" 2008-Apr-29 18:47:55 LOG3 vw_send: To DATATAKING: set ra 245.79 2008-Apr-29 18:47:55 LOG3 vw_send: To DATATAKING: set dec 14.7994960738 2008-Apr-29 18:47:55 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-29 18:47:55 LOG3 vw_send: To DATATAKING: pnt tr 245.79 14.7994960738 -CF 2008-Apr-29 18:47:55 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-29 18:47:55 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-29 18:47:55 LOG5 finish_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2008-Apr-29 18:47:55 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-29 18:47:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 18:47:55 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-29 18:47:55 LOG5 end_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2008-Apr-29 18:47:55 LOG1 fixed_driftmap: Parameters: HA = -00:59:00.9 Start = 08:54:28.5 LST = 08:53:54.8 diff = 33.7 secs 2008-Apr-29 18:47:55 INFO2 fixed_driftmap: Waiting 31.7 seconds for RA 9:53:29 2008-Apr-29 18:47:55 INFO2 lstwait: Waiting for 31.6 secs from LST 08:53:55 to LST 08:54:26 ... 2008-Apr-29 18:47:55 LOG4 send_obs_status: To obs_status: <1> TASKTIME 31.640236491850089 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-29 18:47:55 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-29 18:47:55 LOG5 begin_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2008-Apr-29 18:47:55 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.834 and 1.127 2008-Apr-29 18:47:55 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p1_002" 2008-Apr-29 18:47:55 LOG4 got_cormsg: From DATATAKING: set ra 245.79 2008-Apr-29 18:47:55 LOG4 got_cormsg: From DATATAKING: set dec 14.7994960738 2008-Apr-29 18:47:55 LOG4 got_cormsg: From DATATAKING: vw% 245.79 2008-Apr-29 18:47:55 LOG4 got_cormsg: From DATATAKING: vw% 14.7994960738 2008-Apr-29 18:47:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:47:55 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-29 18:47:55 LOG4 got_cormsg: From DATATAKING: pnt tr 245.79 14.7994960738 -CF 2008-Apr-29 18:47:55 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-29 18:47:55 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-29 18:47:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 18:48:27 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-29 18:48:27 LOG5 end_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2008-Apr-29 18:48:27 LOG4 lstwait: Finished waiting, the gui caused difference: 0.35993647999390532 2008-Apr-29 18:48:27 INFO3 lstwait: Finished waiting 2008-Apr-29 18:48:27 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-29 18:48:27 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-29 18:48:27 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-29 18:48:27 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-29 18:48:27 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-29 18:48:27 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-29 18:48:27 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-29 18:48:27 LOG5 begin_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2008-Apr-29 18:48:27 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-29 18:48:27 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-29 18:48:27 INFO2 take_spectra: Starting WAPP scan: 812000114 2008-Apr-29 18:48:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-29 18:48:27 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-29 18:48:27 LOG5 begin_task: Level: (4) ID = <10132> Status = 0 0 0 0 ok 2008-Apr-29 18:48:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-29 18:48:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82108.00 2008-Apr-29 18:48:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.113464 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-29 18:48:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.113464 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:48:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.113464 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:48:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.113464 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:48:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.113464 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:48:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.113464 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:48:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.113464 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:48:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.113464 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:48:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.113464 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 18:48:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.707 < 0.8)! 2008-Apr-29 18:48:31 LOG4 check_wapp_levels: WAPP-1 power levels: 0.942 0.707 1.095 1.017 2008-Apr-29 18:48:31 LOG4 check_wapp_levels: WAPP-2 power levels: 0.990 0.909 0.927 1.020 2008-Apr-29 18:48:31 LOG4 check_wapp_levels: WAPP-3 power levels: 1.089 0.896 0.995 1.128 2008-Apr-29 18:48:31 LOG4 check_wapp_levels: WAPP-4 power levels: 1.023 0.993 0.892 1.101 2008-Apr-29 18:48:33 INFO5 check_wapp_levels: WAPP power levels are between 0.671 and 1.127 (still bad) 2008-Apr-29 18:48:35 INFO5 check_wapp_levels: WAPP power levels are between 0.641 and 1.127 (still bad) 2008-Apr-29 18:48:37 INFO5 check_wapp_levels: WAPP power levels are between 0.649 and 1.128 (still bad) 2008-Apr-29 18:48:39 INFO5 check_wapp_levels: WAPP power levels are between 0.675 and 1.128 (still bad) 2008-Apr-29 18:48:41 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.856 and 1.129 2008-Apr-29 18:48:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.705 < 0.8)! 2008-Apr-29 18:48:43 LOG4 check_wapp_levels: WAPP-1 power levels: 0.943 0.705 1.096 1.015 2008-Apr-29 18:48:43 LOG4 check_wapp_levels: WAPP-2 power levels: 0.989 0.906 0.927 1.020 2008-Apr-29 18:48:43 LOG4 check_wapp_levels: WAPP-3 power levels: 1.086 0.894 0.996 1.128 2008-Apr-29 18:48:43 LOG4 check_wapp_levels: WAPP-4 power levels: 1.021 0.993 0.891 1.102 2008-Apr-29 18:48:45 INFO5 check_wapp_levels: WAPP power levels are between 0.795 and 1.127 (still bad) 2008-Apr-29 18:48:47 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.852 and 1.127 2008-Apr-29 18:48:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.794 < 0.8)! 2008-Apr-29 18:48:53 LOG4 check_wapp_levels: WAPP-1 power levels: 0.945 0.794 1.095 1.014 2008-Apr-29 18:48:53 LOG4 check_wapp_levels: WAPP-2 power levels: 0.986 0.904 0.928 1.019 2008-Apr-29 18:48:53 LOG4 check_wapp_levels: WAPP-3 power levels: 1.085 0.893 0.997 1.126 2008-Apr-29 18:48:53 LOG4 check_wapp_levels: WAPP-4 power levels: 1.021 0.992 0.890 1.101 2008-Apr-29 18:48:55 INFO5 check_wapp_levels: WAPP power levels are between 0.726 and 1.128 (still bad) 2008-Apr-29 18:48:58 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.877 and 1.127 2008-Apr-29 18:49:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.771 < 0.8)! 2008-Apr-29 18:49:02 LOG4 check_wapp_levels: WAPP-1 power levels: 0.943 0.771 1.103 1.022 2008-Apr-29 18:49:02 LOG4 check_wapp_levels: WAPP-2 power levels: 0.988 0.906 0.926 1.019 2008-Apr-29 18:49:02 LOG4 check_wapp_levels: WAPP-3 power levels: 1.084 0.892 0.993 1.128 2008-Apr-29 18:49:02 LOG4 check_wapp_levels: WAPP-4 power levels: 1.021 0.993 0.889 1.103 2008-Apr-29 18:49:04 INFO5 check_wapp_levels: WAPP power levels are between 0.755 and 1.126 (still bad) 2008-Apr-29 18:49:06 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.817 and 1.126 2008-Apr-29 18:49:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.693 < 0.8)! 2008-Apr-29 18:49:08 LOG4 check_wapp_levels: WAPP-1 power levels: 0.945 0.693 1.108 1.025 2008-Apr-29 18:49:08 LOG4 check_wapp_levels: WAPP-2 power levels: 0.987 0.904 0.926 1.019 2008-Apr-29 18:49:08 LOG4 check_wapp_levels: WAPP-3 power levels: 1.083 0.892 0.996 1.127 2008-Apr-29 18:49:08 LOG4 check_wapp_levels: WAPP-4 power levels: 1.022 0.994 0.891 1.102 2008-Apr-29 18:49:10 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.875 and 1.127 2008-Apr-29 18:49:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.769 < 0.8)! 2008-Apr-29 18:49:20 LOG4 check_wapp_levels: WAPP-1 power levels: 0.942 0.769 1.096 1.015 2008-Apr-29 18:49:20 LOG4 check_wapp_levels: WAPP-2 power levels: 0.986 0.905 0.926 1.019 2008-Apr-29 18:49:20 LOG4 check_wapp_levels: WAPP-3 power levels: 1.084 0.892 0.995 1.127 2008-Apr-29 18:49:20 LOG4 check_wapp_levels: WAPP-4 power levels: 1.021 0.993 0.890 1.100 2008-Apr-29 18:49:22 INFO5 check_wapp_levels: WAPP power levels are between 0.752 and 1.125 (still bad) 2008-Apr-29 18:49:24 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.857 and 1.126 2008-Apr-29 18:49:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.749 < 0.8)! 2008-Apr-29 18:49:26 LOG4 check_wapp_levels: WAPP-1 power levels: 0.943 0.749 1.096 1.015 2008-Apr-29 18:49:26 LOG4 check_wapp_levels: WAPP-2 power levels: 0.988 0.905 0.927 1.018 2008-Apr-29 18:49:26 LOG4 check_wapp_levels: WAPP-3 power levels: 1.083 0.893 0.996 1.125 2008-Apr-29 18:49:26 LOG4 check_wapp_levels: WAPP-4 power levels: 1.020 0.993 0.890 1.100 2008-Apr-29 18:49:28 INFO5 check_wapp_levels: WAPP power levels are between 0.749 and 1.125 (still bad) 2008-Apr-29 18:49:30 INFO5 check_wapp_levels: WAPP power levels are between 0.655 and 1.127 (still bad) 2008-Apr-29 18:49:32 INFO5 check_wapp_levels: WAPP power levels are between 0.684 and 1.126 (still bad) 2008-Apr-29 18:49:34 INFO5 check_wapp_levels: WAPP power levels are between 0.797 and 1.126 (still bad) 2008-Apr-29 18:49:36 INFO5 check_wapp_levels: WAPP power levels are between 0.761 and 1.126 (still bad) 2008-Apr-29 18:49:38 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.891 and 1.127 2008-Apr-29 18:49:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.686 < 0.8)! 2008-Apr-29 18:49:40 LOG4 check_wapp_levels: WAPP-1 power levels: 0.944 0.686 1.097 1.015 2008-Apr-29 18:49:40 LOG4 check_wapp_levels: WAPP-2 power levels: 0.987 0.907 0.926 1.019 2008-Apr-29 18:49:40 LOG4 check_wapp_levels: WAPP-3 power levels: 1.081 0.891 0.994 1.126 2008-Apr-29 18:49:40 LOG4 check_wapp_levels: WAPP-4 power levels: 1.022 0.994 0.892 1.102 2008-Apr-29 18:49:42 INFO5 check_wapp_levels: WAPP power levels are between 0.761 and 1.126 (still bad) 2008-Apr-29 18:49:44 INFO5 check_wapp_levels: WAPP power levels are between 0.742 and 1.126 (still bad) 2008-Apr-29 18:49:46 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.800 and 1.127 2008-Apr-29 18:49:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.738 < 0.8)! 2008-Apr-29 18:49:54 LOG4 check_wapp_levels: WAPP-1 power levels: 0.943 0.738 1.095 1.014 2008-Apr-29 18:49:54 LOG4 check_wapp_levels: WAPP-2 power levels: 0.986 0.905 0.925 1.018 2008-Apr-29 18:49:54 LOG4 check_wapp_levels: WAPP-3 power levels: 1.081 0.892 0.992 1.126 2008-Apr-29 18:49:54 LOG4 check_wapp_levels: WAPP-4 power levels: 1.022 0.995 0.891 1.102 2008-Apr-29 18:49:56 INFO5 check_wapp_levels: WAPP power levels are between 0.620 and 1.125 (still bad) 2008-Apr-29 18:49:58 INFO5 check_wapp_levels: WAPP power levels are between 0.735 and 1.126 (still bad) 2008-Apr-29 18:50:00 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.857 and 1.126 2008-Apr-29 18:50:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.744 < 0.8)! 2008-Apr-29 18:50:02 LOG4 check_wapp_levels: WAPP-1 power levels: 0.944 0.744 1.095 1.014 2008-Apr-29 18:50:02 LOG4 check_wapp_levels: WAPP-2 power levels: 0.987 0.906 0.926 1.019 2008-Apr-29 18:50:02 LOG4 check_wapp_levels: WAPP-3 power levels: 1.080 0.889 0.993 1.125 2008-Apr-29 18:50:02 LOG4 check_wapp_levels: WAPP-4 power levels: 1.020 0.993 0.890 1.099 2008-Apr-29 18:50:04 INFO5 check_wapp_levels: WAPP power levels are between 0.731 and 1.126 (still bad) 2008-Apr-29 18:50:06 INFO5 check_wapp_levels: WAPP power levels are between 0.751 and 1.126 (still bad) 2008-Apr-29 18:50:08 INFO5 check_wapp_levels: WAPP power levels are between 0.769 and 1.126 (still bad) 2008-Apr-29 18:50:10 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.875 and 1.125 2008-Apr-29 18:50:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.647 < 0.8)! 2008-Apr-29 18:50:12 LOG4 check_wapp_levels: WAPP-1 power levels: 0.944 0.647 1.095 1.015 2008-Apr-29 18:50:12 LOG4 check_wapp_levels: WAPP-2 power levels: 0.989 0.906 0.927 1.018 2008-Apr-29 18:50:12 LOG4 check_wapp_levels: WAPP-3 power levels: 1.080 0.891 0.992 1.125 2008-Apr-29 18:50:12 LOG4 check_wapp_levels: WAPP-4 power levels: 1.021 0.992 0.889 1.099 2008-Apr-29 18:50:14 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.852 and 1.125 2008-Apr-29 18:50:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.713 < 0.8)! 2008-Apr-29 18:50:25 LOG4 check_wapp_levels: WAPP-1 power levels: 0.939 0.713 1.095 1.017 2008-Apr-29 18:50:25 LOG4 check_wapp_levels: WAPP-2 power levels: 0.988 0.906 0.927 1.019 2008-Apr-29 18:50:25 LOG4 check_wapp_levels: WAPP-3 power levels: 1.080 0.891 0.994 1.124 2008-Apr-29 18:50:25 LOG4 check_wapp_levels: WAPP-4 power levels: 1.020 0.994 0.889 1.100 2008-Apr-29 18:50:27 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.873 and 1.126 2008-Apr-29 18:50:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.730 < 0.8)! 2008-Apr-29 18:50:29 LOG4 check_wapp_levels: WAPP-1 power levels: 0.940 0.730 1.095 1.013 2008-Apr-29 18:50:29 LOG4 check_wapp_levels: WAPP-2 power levels: 0.987 0.905 0.927 1.020 2008-Apr-29 18:50:29 LOG4 check_wapp_levels: WAPP-3 power levels: 1.079 0.891 0.993 1.125 2008-Apr-29 18:50:29 LOG4 check_wapp_levels: WAPP-4 power levels: 1.021 0.992 0.890 1.098 2008-Apr-29 18:50:31 INFO5 check_wapp_levels: WAPP power levels are between 0.764 and 1.125 (still bad) 2008-Apr-29 18:50:33 INFO5 check_wapp_levels: WAPP power levels are between 0.765 and 1.125 (still bad) 2008-Apr-29 18:50:35 INFO5 check_wapp_levels: WAPP power levels are between 0.639 and 1.126 (still bad) 2008-Apr-29 18:50:37 INFO5 check_wapp_levels: WAPP power levels are between 0.747 and 1.126 (still bad) 2008-Apr-29 18:50:39 INFO5 check_wapp_levels: WAPP power levels are between 0.761 and 1.126 (still bad) 2008-Apr-29 18:50:41 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.827 and 1.126 2008-Apr-29 18:50:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.794 < 0.8)! 2008-Apr-29 18:50:43 LOG4 check_wapp_levels: WAPP-1 power levels: 0.945 0.794 1.094 1.014 2008-Apr-29 18:50:43 LOG4 check_wapp_levels: WAPP-2 power levels: 0.987 0.904 0.927 1.019 2008-Apr-29 18:50:43 LOG4 check_wapp_levels: WAPP-3 power levels: 1.078 0.890 0.993 1.125 2008-Apr-29 18:50:43 LOG4 check_wapp_levels: WAPP-4 power levels: 1.023 0.995 0.892 1.101 2008-Apr-29 18:50:45 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.883 and 1.126 2008-Apr-29 18:50:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.783 < 0.8)! 2008-Apr-29 18:50:47 LOG4 check_wapp_levels: WAPP-1 power levels: 0.943 0.783 1.095 1.014 2008-Apr-29 18:50:47 LOG4 check_wapp_levels: WAPP-2 power levels: 0.986 0.906 0.927 1.019 2008-Apr-29 18:50:47 LOG4 check_wapp_levels: WAPP-3 power levels: 1.080 0.890 0.994 1.126 2008-Apr-29 18:50:47 LOG4 check_wapp_levels: WAPP-4 power levels: 1.022 0.996 0.892 1.103 2008-Apr-29 18:50:49 INFO5 check_wapp_levels: WAPP power levels are between 0.762 and 1.126 (still bad) 2008-Apr-29 18:50:51 INFO5 check_wapp_levels: WAPP power levels are between 0.769 and 1.127 (still bad) 2008-Apr-29 18:50:53 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.804 and 1.126 2008-Apr-29 18:50:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.765 < 0.8)! 2008-Apr-29 18:50:55 LOG4 check_wapp_levels: WAPP-1 power levels: 0.940 0.765 1.095 1.013 2008-Apr-29 18:50:55 LOG4 check_wapp_levels: WAPP-2 power levels: 0.987 0.905 0.928 1.019 2008-Apr-29 18:50:55 LOG4 check_wapp_levels: WAPP-3 power levels: 1.081 0.892 0.996 1.126 2008-Apr-29 18:50:55 LOG4 check_wapp_levels: WAPP-4 power levels: 1.022 0.994 0.891 1.103 2008-Apr-29 18:50:57 INFO5 check_wapp_levels: WAPP power levels are between 0.759 and 1.126 (still bad) 2008-Apr-29 18:50:59 INFO5 check_wapp_levels: WAPP power levels are between 0.618 and 1.126 (still bad) 2008-Apr-29 18:51:01 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.881 and 1.125 2008-Apr-29 18:51:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.601 < 0.8)! 2008-Apr-29 18:51:05 LOG4 check_wapp_levels: WAPP-1 power levels: 0.936 0.601 1.096 1.015 2008-Apr-29 18:51:05 LOG4 check_wapp_levels: WAPP-2 power levels: 0.986 0.905 0.926 1.018 2008-Apr-29 18:51:05 LOG4 check_wapp_levels: WAPP-3 power levels: 1.080 0.890 0.995 1.125 2008-Apr-29 18:51:05 LOG4 check_wapp_levels: WAPP-4 power levels: 1.020 0.994 0.890 1.101 2008-Apr-29 18:51:07 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.846 and 1.126 2008-Apr-29 18:51:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.611 < 0.8)! 2008-Apr-29 18:51:09 LOG4 check_wapp_levels: WAPP-1 power levels: 0.936 0.611 1.096 1.013 2008-Apr-29 18:51:09 LOG4 check_wapp_levels: WAPP-2 power levels: 0.988 0.906 0.927 1.019 2008-Apr-29 18:51:09 LOG4 check_wapp_levels: WAPP-3 power levels: 1.079 0.891 0.994 1.125 2008-Apr-29 18:51:09 LOG4 check_wapp_levels: WAPP-4 power levels: 1.020 0.995 0.889 1.100 2008-Apr-29 18:51:11 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.840 and 1.126 2008-Apr-29 18:51:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.746 < 0.8)! 2008-Apr-29 18:51:13 LOG4 check_wapp_levels: WAPP-1 power levels: 0.936 0.746 1.095 1.015 2008-Apr-29 18:51:13 LOG4 check_wapp_levels: WAPP-2 power levels: 0.988 0.905 0.927 1.017 2008-Apr-29 18:51:13 LOG4 check_wapp_levels: WAPP-3 power levels: 1.080 0.890 0.994 1.125 2008-Apr-29 18:51:13 LOG4 check_wapp_levels: WAPP-4 power levels: 1.022 0.994 0.890 1.101 2008-Apr-29 18:51:15 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.807 and 1.127 2008-Apr-29 18:51:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.794 < 0.8)! 2008-Apr-29 18:51:17 LOG4 check_wapp_levels: WAPP-1 power levels: 0.941 0.794 1.096 1.014 2008-Apr-29 18:51:17 LOG4 check_wapp_levels: WAPP-2 power levels: 0.987 0.906 0.928 1.019 2008-Apr-29 18:51:17 LOG4 check_wapp_levels: WAPP-3 power levels: 1.081 0.891 0.995 1.127 2008-Apr-29 18:51:17 LOG4 check_wapp_levels: WAPP-4 power levels: 1.020 0.994 0.889 1.101 2008-Apr-29 18:51:19 INFO5 check_wapp_levels: WAPP power levels are between 0.798 and 1.126 (still bad) 2008-Apr-29 18:51:21 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.849 and 1.127 2008-Apr-29 18:51:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.773 < 0.8)! 2008-Apr-29 18:51:27 LOG4 check_wapp_levels: WAPP-1 power levels: 0.938 0.773 1.095 1.014 2008-Apr-29 18:51:27 LOG4 check_wapp_levels: WAPP-2 power levels: 0.986 0.908 0.927 1.019 2008-Apr-29 18:51:27 LOG4 check_wapp_levels: WAPP-3 power levels: 1.081 0.892 0.995 1.126 2008-Apr-29 18:51:27 LOG4 check_wapp_levels: WAPP-4 power levels: 1.020 0.995 0.888 1.102 2008-Apr-29 18:51:29 INFO5 check_wapp_levels: WAPP power levels are between 0.749 and 1.125 (still bad) 2008-Apr-29 18:51:31 INFO5 check_wapp_levels: WAPP power levels are between 0.797 and 1.125 (still bad) 2008-Apr-29 18:51:33 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.879 and 1.127 2008-Apr-29 18:51:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.779 < 0.8)! 2008-Apr-29 18:51:35 LOG4 check_wapp_levels: WAPP-1 power levels: 0.942 0.779 1.095 1.012 2008-Apr-29 18:51:35 LOG4 check_wapp_levels: WAPP-2 power levels: 0.987 0.906 0.928 1.019 2008-Apr-29 18:51:35 LOG4 check_wapp_levels: WAPP-3 power levels: 1.082 0.892 0.994 1.126 2008-Apr-29 18:51:35 LOG4 check_wapp_levels: WAPP-4 power levels: 1.021 0.993 0.889 1.100 2008-Apr-29 18:51:37 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.877 and 1.126 2008-Apr-29 18:51:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.772 < 0.8)! 2008-Apr-29 18:51:39 LOG4 check_wapp_levels: WAPP-1 power levels: 0.941 0.772 1.094 1.015 2008-Apr-29 18:51:39 LOG4 check_wapp_levels: WAPP-2 power levels: 0.987 0.907 0.926 1.019 2008-Apr-29 18:51:39 LOG4 check_wapp_levels: WAPP-3 power levels: 1.080 0.892 0.994 1.127 2008-Apr-29 18:51:39 LOG4 check_wapp_levels: WAPP-4 power levels: 1.020 0.993 0.888 1.100 2008-Apr-29 18:51:41 INFO5 check_wapp_levels: WAPP power levels are between 0.640 and 1.126 (still bad) 2008-Apr-29 18:51:43 INFO5 check_wapp_levels: WAPP power levels are between 0.672 and 1.127 (still bad) 2008-Apr-29 18:51:45 INFO5 check_wapp_levels: WAPP power levels are between 0.696 and 1.128 (still bad) 2008-Apr-29 18:51:47 INFO5 check_wapp_levels: WAPP power levels are between 0.798 and 1.128 (still bad) 2008-Apr-29 18:51:50 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.868 and 1.126 2008-Apr-29 18:51:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.631 < 0.8)! 2008-Apr-29 18:51:52 LOG4 check_wapp_levels: WAPP-1 power levels: 0.939 0.631 1.094 1.015 2008-Apr-29 18:51:52 LOG4 check_wapp_levels: WAPP-2 power levels: 0.992 0.910 0.930 1.021 2008-Apr-29 18:51:52 LOG4 check_wapp_levels: WAPP-3 power levels: 1.080 0.894 0.992 1.126 2008-Apr-29 18:51:52 LOG4 check_wapp_levels: WAPP-4 power levels: 1.021 0.994 0.888 1.101 2008-Apr-29 18:51:54 INFO5 check_wapp_levels: WAPP power levels are between 0.644 and 1.127 (still bad) 2008-Apr-29 18:51:56 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.807 and 1.126 2008-Apr-29 18:52:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.694 < 0.8)! 2008-Apr-29 18:52:00 LOG4 check_wapp_levels: WAPP-1 power levels: 0.937 0.694 1.094 1.013 2008-Apr-29 18:52:00 LOG4 check_wapp_levels: WAPP-2 power levels: 0.992 0.911 0.929 1.022 2008-Apr-29 18:52:00 LOG4 check_wapp_levels: WAPP-3 power levels: 1.082 0.893 0.994 1.127 2008-Apr-29 18:52:00 LOG4 check_wapp_levels: WAPP-4 power levels: 1.022 0.993 0.889 1.100 2008-Apr-29 18:52:02 INFO5 check_wapp_levels: WAPP power levels are between 0.738 and 1.126 (still bad) 2008-Apr-29 18:52:04 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.883 and 1.127 2008-Apr-29 18:52:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.674 < 0.8)! 2008-Apr-29 18:52:06 LOG4 check_wapp_levels: WAPP-1 power levels: 0.940 0.674 1.095 1.014 2008-Apr-29 18:52:06 LOG4 check_wapp_levels: WAPP-2 power levels: 0.988 0.908 0.943 1.037 2008-Apr-29 18:52:06 LOG4 check_wapp_levels: WAPP-3 power levels: 1.083 0.894 0.992 1.126 2008-Apr-29 18:52:06 LOG4 check_wapp_levels: WAPP-4 power levels: 1.023 0.995 0.889 1.101 2008-Apr-29 18:52:08 INFO5 check_wapp_levels: WAPP power levels are between 0.638 and 1.127 (still bad) 2008-Apr-29 18:52:10 INFO5 check_wapp_levels: WAPP power levels are between 0.703 and 1.128 (still bad) 2008-Apr-29 18:52:12 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.830 and 1.126 2008-Apr-29 18:52:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.782 < 0.8)! 2008-Apr-29 18:52:18 LOG4 check_wapp_levels: WAPP-1 power levels: 0.946 0.782 1.096 1.016 2008-Apr-29 18:52:18 LOG4 check_wapp_levels: WAPP-2 power levels: 0.986 0.906 0.947 1.039 2008-Apr-29 18:52:18 LOG4 check_wapp_levels: WAPP-3 power levels: 1.083 0.894 0.994 1.127 2008-Apr-29 18:52:18 LOG4 check_wapp_levels: WAPP-4 power levels: 1.022 0.995 0.889 1.104 2008-Apr-29 18:52:20 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.890 and 1.126 2008-Apr-29 18:52:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.633 < 0.8)! 2008-Apr-29 18:52:22 LOG4 check_wapp_levels: WAPP-1 power levels: 0.947 0.633 1.095 1.017 2008-Apr-29 18:52:22 LOG4 check_wapp_levels: WAPP-2 power levels: 0.984 0.906 0.939 1.031 2008-Apr-29 18:52:22 LOG4 check_wapp_levels: WAPP-3 power levels: 1.084 0.895 0.995 1.128 2008-Apr-29 18:52:22 LOG4 check_wapp_levels: WAPP-4 power levels: 1.023 0.995 0.890 1.102 2008-Apr-29 18:52:24 INFO5 check_wapp_levels: WAPP power levels are between 0.683 and 1.127 (still bad) 2008-Apr-29 18:52:26 INFO5 check_wapp_levels: WAPP power levels are between 0.672 and 1.128 (still bad) 2008-Apr-29 18:52:28 INFO5 check_wapp_levels: WAPP power levels are between 0.742 and 1.128 (still bad) 2008-Apr-29 18:52:30 INFO5 check_wapp_levels: WAPP power levels are between 0.754 and 1.129 (still bad) 2008-Apr-29 18:52:32 INFO5 check_wapp_levels: WAPP power levels are between 0.744 and 1.129 (still bad) 2008-Apr-29 18:52:34 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.818 and 1.128 2008-Apr-29 18:52:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.770 < 0.8)! 2008-Apr-29 18:52:36 LOG4 check_wapp_levels: WAPP-1 power levels: 0.944 0.770 1.095 1.014 2008-Apr-29 18:52:36 LOG4 check_wapp_levels: WAPP-2 power levels: 0.988 0.906 0.927 1.019 2008-Apr-29 18:52:36 LOG4 check_wapp_levels: WAPP-3 power levels: 1.123 0.928 0.995 1.129 2008-Apr-29 18:52:36 LOG4 check_wapp_levels: WAPP-4 power levels: 1.024 0.995 0.892 1.103 2008-Apr-29 18:52:38 INFO5 check_wapp_levels: WAPP power levels are between 0.740 and 1.128 (still bad) 2008-Apr-29 18:52:40 INFO5 check_wapp_levels: WAPP power levels are between 0.765 and 1.129 (still bad) 2008-Apr-29 18:52:42 INFO5 check_wapp_levels: WAPP power levels are between 0.776 and 1.129 (still bad) 2008-Apr-29 18:52:44 INFO5 check_wapp_levels: WAPP power levels are between 0.790 and 1.129 (still bad) 2008-Apr-29 18:52:46 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.845 and 1.128 2008-Apr-29 18:53:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.787 < 0.8)! 2008-Apr-29 18:53:04 LOG4 check_wapp_levels: WAPP-1 power levels: 0.942 0.787 1.095 1.015 2008-Apr-29 18:53:04 LOG4 check_wapp_levels: WAPP-2 power levels: 0.988 0.909 0.932 1.024 2008-Apr-29 18:53:04 LOG4 check_wapp_levels: WAPP-3 power levels: 1.085 0.897 0.999 1.132 2008-Apr-29 18:53:04 LOG4 check_wapp_levels: WAPP-4 power levels: 1.024 0.994 0.891 1.100 2008-Apr-29 18:53:06 INFO5 check_wapp_levels: WAPP power levels are between 0.775 and 1.133 (still bad) 2008-Apr-29 18:53:08 INFO5 check_wapp_levels: WAPP power levels are between 0.796 and 1.133 (still bad) 2008-Apr-29 18:53:10 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.829 and 1.134 2008-Apr-29 18:53:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.784 < 0.8)! 2008-Apr-29 18:53:19 LOG4 check_wapp_levels: WAPP-1 power levels: 0.940 0.784 1.096 1.014 2008-Apr-29 18:53:19 LOG4 check_wapp_levels: WAPP-2 power levels: 0.988 0.908 0.930 1.022 2008-Apr-29 18:53:19 LOG4 check_wapp_levels: WAPP-3 power levels: 1.083 0.894 1.000 1.133 2008-Apr-29 18:53:19 LOG4 check_wapp_levels: WAPP-4 power levels: 1.022 0.993 0.890 1.099 2008-Apr-29 18:53:21 INFO5 check_wapp_levels: WAPP power levels are between 0.768 and 1.133 (still bad) 2008-Apr-29 18:53:23 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.841 and 1.131 2008-Apr-29 18:53:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.735 < 0.8)! 2008-Apr-29 18:53:25 LOG4 check_wapp_levels: WAPP-1 power levels: 0.940 0.735 1.097 1.016 2008-Apr-29 18:53:25 LOG4 check_wapp_levels: WAPP-2 power levels: 0.990 0.912 0.928 1.021 2008-Apr-29 18:53:25 LOG4 check_wapp_levels: WAPP-3 power levels: 1.084 0.895 0.997 1.130 2008-Apr-29 18:53:25 LOG4 check_wapp_levels: WAPP-4 power levels: 1.022 0.993 0.891 1.100 2008-Apr-29 18:53:27 INFO5 check_wapp_levels: WAPP power levels are between 0.755 and 1.129 (still bad) 2008-Apr-29 18:53:29 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.860 and 1.128 2008-Apr-29 18:53:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.795 < 0.8)! 2008-Apr-29 18:53:33 LOG4 check_wapp_levels: WAPP-1 power levels: 0.938 0.795 1.098 1.015 2008-Apr-29 18:53:33 LOG4 check_wapp_levels: WAPP-2 power levels: 0.993 0.913 0.928 1.018 2008-Apr-29 18:53:33 LOG4 check_wapp_levels: WAPP-3 power levels: 1.083 0.893 0.996 1.128 2008-Apr-29 18:53:33 LOG4 check_wapp_levels: WAPP-4 power levels: 1.021 0.993 0.890 1.101 2008-Apr-29 18:53:35 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.820 and 1.127 2008-Apr-29 18:53:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.653 < 0.8)! 2008-Apr-29 18:53:37 LOG4 check_wapp_levels: WAPP-1 power levels: 0.942 0.653 1.096 1.014 2008-Apr-29 18:53:37 LOG4 check_wapp_levels: WAPP-2 power levels: 0.989 0.911 0.926 1.018 2008-Apr-29 18:53:37 LOG4 check_wapp_levels: WAPP-3 power levels: 1.083 0.895 0.995 1.128 2008-Apr-29 18:53:37 LOG4 check_wapp_levels: WAPP-4 power levels: 1.022 0.993 0.889 1.100 2008-Apr-29 18:53:39 INFO5 check_wapp_levels: WAPP power levels are between 0.723 and 1.127 (still bad) 2008-Apr-29 18:53:41 INFO5 check_wapp_levels: WAPP power levels are between 0.721 and 1.126 (still bad) 2008-Apr-29 18:53:43 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.889 and 1.127 2008-Apr-29 18:53:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.668 < 0.8)! 2008-Apr-29 18:53:47 LOG4 check_wapp_levels: WAPP-1 power levels: 0.939 0.668 1.096 1.015 2008-Apr-29 18:53:47 LOG4 check_wapp_levels: WAPP-2 power levels: 0.984 0.906 0.926 1.017 2008-Apr-29 18:53:47 LOG4 check_wapp_levels: WAPP-3 power levels: 1.081 0.894 0.998 1.127 2008-Apr-29 18:53:47 LOG4 check_wapp_levels: WAPP-4 power levels: 1.023 0.995 0.890 1.102 2008-Apr-29 18:53:49 INFO5 check_wapp_levels: WAPP power levels are between 0.737 and 1.128 (still bad) 2008-Apr-29 18:53:51 INFO5 check_wapp_levels: WAPP power levels are between 0.773 and 1.129 (still bad) 2008-Apr-29 18:53:53 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.884 and 1.128 2008-Apr-29 18:53:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.746 < 0.8)! 2008-Apr-29 18:53:55 LOG4 check_wapp_levels: WAPP-1 power levels: 0.944 0.746 1.098 1.014 2008-Apr-29 18:53:55 LOG4 check_wapp_levels: WAPP-2 power levels: 0.983 0.905 0.925 1.018 2008-Apr-29 18:53:55 LOG4 check_wapp_levels: WAPP-3 power levels: 1.082 0.892 0.997 1.130 2008-Apr-29 18:53:55 LOG4 check_wapp_levels: WAPP-4 power levels: 1.024 0.994 0.892 1.101 2008-Apr-29 18:53:57 INFO5 check_wapp_levels: WAPP power levels are between 0.661 and 1.128 (still bad) 2008-Apr-29 18:53:59 INFO5 check_wapp_levels: WAPP power levels are between 0.653 and 1.128 (still bad) 2008-Apr-29 18:54:01 INFO5 check_wapp_levels: WAPP power levels are between 0.653 and 1.129 (still bad) 2008-Apr-29 18:54:03 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.812 and 1.128 2008-Apr-29 18:54:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.645 < 0.8)! 2008-Apr-29 18:54:13 LOG4 check_wapp_levels: WAPP-1 power levels: 0.940 0.645 1.095 1.012 2008-Apr-29 18:54:13 LOG4 check_wapp_levels: WAPP-2 power levels: 0.986 0.906 0.927 1.017 2008-Apr-29 18:54:13 LOG4 check_wapp_levels: WAPP-3 power levels: 1.079 0.891 0.995 1.126 2008-Apr-29 18:54:13 LOG4 check_wapp_levels: WAPP-4 power levels: 1.028 0.999 0.896 1.107 2008-Apr-29 18:54:15 INFO5 check_wapp_levels: WAPP power levels are between 0.561 and 1.126 (still bad) 2008-Apr-29 18:54:17 INFO5 check_wapp_levels: WAPP power levels are between 0.613 and 1.127 (still bad) 2008-Apr-29 18:54:19 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.824 and 1.126 2008-Apr-29 18:54:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.726 < 0.8)! 2008-Apr-29 18:54:25 LOG4 check_wapp_levels: WAPP-1 power levels: 0.940 0.726 1.094 1.013 2008-Apr-29 18:54:25 LOG4 check_wapp_levels: WAPP-2 power levels: 0.983 0.905 0.927 1.017 2008-Apr-29 18:54:25 LOG4 check_wapp_levels: WAPP-3 power levels: 1.079 0.891 0.995 1.127 2008-Apr-29 18:54:25 LOG4 check_wapp_levels: WAPP-4 power levels: 1.024 0.995 0.892 1.103 2008-Apr-29 18:54:27 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.867 and 1.126 2008-Apr-29 18:54:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.527 < 0.8)! 2008-Apr-29 18:54:31 LOG4 check_wapp_levels: WAPP-1 power levels: 0.935 0.527 1.095 1.014 2008-Apr-29 18:54:31 LOG4 check_wapp_levels: WAPP-2 power levels: 0.984 0.904 0.926 1.018 2008-Apr-29 18:54:31 LOG4 check_wapp_levels: WAPP-3 power levels: 1.077 0.890 0.997 1.127 2008-Apr-29 18:54:31 LOG4 check_wapp_levels: WAPP-4 power levels: 1.020 0.992 0.890 1.098 2008-Apr-29 18:54:33 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.869 and 1.128 2008-Apr-29 18:54:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.689 < 0.8)! 2008-Apr-29 18:54:38 LOG4 check_wapp_levels: WAPP-1 power levels: 0.941 0.689 1.095 1.015 2008-Apr-29 18:54:38 LOG4 check_wapp_levels: WAPP-2 power levels: 0.983 0.904 0.926 1.018 2008-Apr-29 18:54:38 LOG4 check_wapp_levels: WAPP-3 power levels: 1.078 0.890 0.999 1.127 2008-Apr-29 18:54:38 LOG4 check_wapp_levels: WAPP-4 power levels: 1.021 0.993 0.889 1.101 2008-Apr-29 18:54:40 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.890 and 1.128 2008-Apr-29 18:54:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.551 < 0.8)! 2008-Apr-29 18:54:44 LOG4 check_wapp_levels: WAPP-1 power levels: 0.942 0.551 1.096 1.014 2008-Apr-29 18:54:44 LOG4 check_wapp_levels: WAPP-2 power levels: 0.985 0.904 0.925 1.017 2008-Apr-29 18:54:44 LOG4 check_wapp_levels: WAPP-3 power levels: 1.079 0.890 0.996 1.125 2008-Apr-29 18:54:44 LOG4 check_wapp_levels: WAPP-4 power levels: 1.020 0.993 0.889 1.099 2008-Apr-29 18:54:46 INFO5 check_wapp_levels: WAPP power levels are between 0.575 and 1.126 (still bad) 2008-Apr-29 18:54:48 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.804 and 1.126 2008-Apr-29 18:54:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.793 < 0.8)! 2008-Apr-29 18:54:50 LOG4 check_wapp_levels: WAPP-1 power levels: 0.936 0.793 1.097 1.016 2008-Apr-29 18:54:50 LOG4 check_wapp_levels: WAPP-2 power levels: 0.984 0.904 0.927 1.017 2008-Apr-29 18:54:50 LOG4 check_wapp_levels: WAPP-3 power levels: 1.078 0.888 0.992 1.124 2008-Apr-29 18:54:50 LOG4 check_wapp_levels: WAPP-4 power levels: 1.020 0.993 0.889 1.100 2008-Apr-29 18:54:52 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.831 and 1.124 2008-Apr-29 18:55:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.641 < 0.8)! 2008-Apr-29 18:55:02 LOG4 check_wapp_levels: WAPP-1 power levels: 0.939 0.641 1.096 1.014 2008-Apr-29 18:55:02 LOG4 check_wapp_levels: WAPP-2 power levels: 0.982 0.904 0.925 1.017 2008-Apr-29 18:55:02 LOG4 check_wapp_levels: WAPP-3 power levels: 1.079 0.891 0.994 1.126 2008-Apr-29 18:55:02 LOG4 check_wapp_levels: WAPP-4 power levels: 1.019 0.993 0.889 1.099 2008-Apr-29 18:55:04 INFO5 check_wapp_levels: WAPP power levels are between 0.777 and 1.125 (still bad) 2008-Apr-29 18:55:06 INFO5 check_wapp_levels: WAPP power levels are between 0.575 and 1.124 (still bad) 2008-Apr-29 18:55:08 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.845 and 1.125 2008-Apr-29 18:55:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.599 < 0.8)! 2008-Apr-29 18:55:12 LOG4 check_wapp_levels: WAPP-1 power levels: 0.936 0.599 1.095 1.014 2008-Apr-29 18:55:12 LOG4 check_wapp_levels: WAPP-2 power levels: 0.983 0.904 0.925 1.017 2008-Apr-29 18:55:12 LOG4 check_wapp_levels: WAPP-3 power levels: 1.078 0.889 0.993 1.126 2008-Apr-29 18:55:12 LOG4 check_wapp_levels: WAPP-4 power levels: 1.020 0.993 0.890 1.099 2008-Apr-29 18:55:14 INFO5 check_wapp_levels: WAPP power levels are between 0.762 and 1.126 (still bad) 2008-Apr-29 18:55:16 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.802 and 1.126 2008-Apr-29 18:55:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.781 < 0.8)! 2008-Apr-29 18:55:26 LOG4 check_wapp_levels: WAPP-1 power levels: 0.940 0.781 1.094 1.015 2008-Apr-29 18:55:26 LOG4 check_wapp_levels: WAPP-2 power levels: 0.986 0.904 0.925 1.016 2008-Apr-29 18:55:26 LOG4 check_wapp_levels: WAPP-3 power levels: 1.075 0.889 0.992 1.124 2008-Apr-29 18:55:26 LOG4 check_wapp_levels: WAPP-4 power levels: 1.019 0.992 0.889 1.098 2008-Apr-29 18:55:28 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.863 and 1.124 2008-Apr-29 18:55:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.701 < 0.8)! 2008-Apr-29 18:55:38 LOG4 check_wapp_levels: WAPP-1 power levels: 0.935 0.701 1.096 1.018 2008-Apr-29 18:55:38 LOG4 check_wapp_levels: WAPP-2 power levels: 0.984 0.903 0.927 1.015 2008-Apr-29 18:55:38 LOG4 check_wapp_levels: WAPP-3 power levels: 1.074 0.888 0.993 1.122 2008-Apr-29 18:55:38 LOG4 check_wapp_levels: WAPP-4 power levels: 1.020 0.993 0.890 1.097 2008-Apr-29 18:55:40 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.853 and 1.123 2008-Apr-29 18:55:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.777 < 0.8)! 2008-Apr-29 18:55:54 LOG4 check_wapp_levels: WAPP-1 power levels: 0.934 0.777 1.096 1.015 2008-Apr-29 18:55:54 LOG4 check_wapp_levels: WAPP-2 power levels: 0.985 0.904 0.925 1.016 2008-Apr-29 18:55:54 LOG4 check_wapp_levels: WAPP-3 power levels: 1.076 0.889 0.991 1.125 2008-Apr-29 18:55:54 LOG4 check_wapp_levels: WAPP-4 power levels: 1.019 0.992 0.889 1.098 2008-Apr-29 18:55:56 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.814 and 1.125 2008-Apr-29 18:56:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.743 < 0.8)! 2008-Apr-29 18:56:03 LOG4 check_wapp_levels: WAPP-1 power levels: 0.935 0.743 1.099 1.019 2008-Apr-29 18:56:03 LOG4 check_wapp_levels: WAPP-2 power levels: 0.981 0.904 0.926 1.017 2008-Apr-29 18:56:03 LOG4 check_wapp_levels: WAPP-3 power levels: 1.075 0.888 0.994 1.124 2008-Apr-29 18:56:03 LOG4 check_wapp_levels: WAPP-4 power levels: 1.018 0.993 0.888 1.098 2008-Apr-29 18:56:05 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.858 and 1.123 2008-Apr-29 18:56:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.756 < 0.8)! 2008-Apr-29 18:56:11 LOG4 check_wapp_levels: WAPP-1 power levels: 0.939 0.756 1.099 1.019 2008-Apr-29 18:56:11 LOG4 check_wapp_levels: WAPP-2 power levels: 0.986 0.903 0.925 1.016 2008-Apr-29 18:56:11 LOG4 check_wapp_levels: WAPP-3 power levels: 1.074 0.888 0.994 1.124 2008-Apr-29 18:56:11 LOG4 check_wapp_levels: WAPP-4 power levels: 1.019 0.992 0.887 1.097 2008-Apr-29 18:56:13 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.888 and 1.125 2008-Apr-29 18:56:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.730 < 0.8)! 2008-Apr-29 18:56:21 LOG4 check_wapp_levels: WAPP-1 power levels: 0.935 0.730 1.098 1.016 2008-Apr-29 18:56:21 LOG4 check_wapp_levels: WAPP-2 power levels: 0.985 0.903 0.925 1.016 2008-Apr-29 18:56:21 LOG4 check_wapp_levels: WAPP-3 power levels: 1.075 0.889 0.993 1.123 2008-Apr-29 18:56:21 LOG4 check_wapp_levels: WAPP-4 power levels: 1.018 0.992 0.888 1.097 2008-Apr-29 18:56:23 INFO5 check_wapp_levels: WAPP power levels are between 0.726 and 1.123 (still bad) 2008-Apr-29 18:56:25 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.822 and 1.123 2008-Apr-29 18:56:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.798 < 0.8)! 2008-Apr-29 18:56:31 LOG4 check_wapp_levels: WAPP-1 power levels: 0.939 0.798 1.097 1.017 2008-Apr-29 18:56:31 LOG4 check_wapp_levels: WAPP-2 power levels: 0.985 0.904 0.927 1.017 2008-Apr-29 18:56:31 LOG4 check_wapp_levels: WAPP-3 power levels: 1.075 0.889 0.994 1.124 2008-Apr-29 18:56:31 LOG4 check_wapp_levels: WAPP-4 power levels: 1.020 0.993 0.888 1.100 2008-Apr-29 18:56:33 INFO5 check_wapp_levels: WAPP power levels are between 0.691 and 1.123 (still bad) 2008-Apr-29 18:56:35 INFO5 check_wapp_levels: WAPP power levels are between 0.799 and 1.123 (still bad) 2008-Apr-29 18:56:37 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.828 and 1.122 2008-Apr-29 18:56:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.756 < 0.8)! 2008-Apr-29 18:56:41 LOG4 check_wapp_levels: WAPP-1 power levels: 0.937 0.756 1.098 1.016 2008-Apr-29 18:56:41 LOG4 check_wapp_levels: WAPP-2 power levels: 0.986 0.905 0.925 1.017 2008-Apr-29 18:56:41 LOG4 check_wapp_levels: WAPP-3 power levels: 1.075 0.888 0.993 1.123 2008-Apr-29 18:56:41 LOG4 check_wapp_levels: WAPP-4 power levels: 1.020 0.993 0.889 1.098 2008-Apr-29 18:56:43 INFO5 check_wapp_levels: WAPP power levels are between 0.751 and 1.124 (still bad) 2008-Apr-29 18:56:45 INFO5 check_wapp_levels: WAPP power levels are between 0.753 and 1.123 (still bad) 2008-Apr-29 18:56:47 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.825 and 1.124 2008-Apr-29 18:56:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.746 < 0.8)! 2008-Apr-29 18:56:49 LOG4 check_wapp_levels: WAPP-1 power levels: 0.940 0.746 1.099 1.019 2008-Apr-29 18:56:49 LOG4 check_wapp_levels: WAPP-2 power levels: 0.986 0.904 0.927 1.019 2008-Apr-29 18:56:49 LOG4 check_wapp_levels: WAPP-3 power levels: 1.076 0.890 0.993 1.123 2008-Apr-29 18:56:49 LOG4 check_wapp_levels: WAPP-4 power levels: 1.020 0.992 0.889 1.098 2008-Apr-29 18:56:51 INFO5 check_wapp_levels: WAPP power levels are between 0.723 and 1.123 (still bad) 2008-Apr-29 18:56:53 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.889 and 1.124 2008-Apr-29 18:57:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.648 < 0.8)! 2008-Apr-29 18:57:01 LOG4 check_wapp_levels: WAPP-1 power levels: 0.936 0.648 1.098 1.017 2008-Apr-29 18:57:01 LOG4 check_wapp_levels: WAPP-2 power levels: 0.985 0.904 0.928 1.017 2008-Apr-29 18:57:01 LOG4 check_wapp_levels: WAPP-3 power levels: 1.077 0.890 0.994 1.125 2008-Apr-29 18:57:01 LOG4 check_wapp_levels: WAPP-4 power levels: 1.021 0.992 0.889 1.098 2008-Apr-29 18:57:03 INFO5 check_wapp_levels: WAPP power levels are between 0.669 and 1.125 (still bad) 2008-Apr-29 18:57:05 INFO5 check_wapp_levels: WAPP power levels are between 0.785 and 1.125 (still bad) 2008-Apr-29 18:57:07 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.876 and 1.126 2008-Apr-29 18:57:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.753 < 0.8)! 2008-Apr-29 18:57:15 LOG4 check_wapp_levels: WAPP-1 power levels: 0.937 0.753 1.096 1.014 2008-Apr-29 18:57:15 LOG4 check_wapp_levels: WAPP-2 power levels: 0.985 0.905 0.928 1.018 2008-Apr-29 18:57:15 LOG4 check_wapp_levels: WAPP-3 power levels: 1.078 0.892 0.994 1.125 2008-Apr-29 18:57:15 LOG4 check_wapp_levels: WAPP-4 power levels: 1.023 0.994 0.891 1.100 2008-Apr-29 18:57:17 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.829 and 1.125 2008-Apr-29 18:57:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.712 < 0.8)! 2008-Apr-29 18:57:21 LOG4 check_wapp_levels: WAPP-1 power levels: 0.934 0.712 1.095 1.012 2008-Apr-29 18:57:21 LOG4 check_wapp_levels: WAPP-2 power levels: 0.989 0.907 0.927 1.018 2008-Apr-29 18:57:21 LOG4 check_wapp_levels: WAPP-3 power levels: 1.079 0.890 0.990 1.124 2008-Apr-29 18:57:21 LOG4 check_wapp_levels: WAPP-4 power levels: 1.024 0.995 0.892 1.101 2008-Apr-29 18:57:23 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.801 and 1.126 2008-Apr-29 18:57:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.607 < 0.8)! 2008-Apr-29 18:57:28 LOG4 check_wapp_levels: WAPP-1 power levels: 0.933 0.607 1.096 1.014 2008-Apr-29 18:57:28 LOG4 check_wapp_levels: WAPP-2 power levels: 0.990 0.909 0.927 1.017 2008-Apr-29 18:57:28 LOG4 check_wapp_levels: WAPP-3 power levels: 1.078 0.892 0.994 1.125 2008-Apr-29 18:57:28 LOG4 check_wapp_levels: WAPP-4 power levels: 1.024 0.995 0.893 1.102 2008-Apr-29 18:57:30 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.891 and 1.126 2008-Apr-29 18:57:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.535 < 0.8)! 2008-Apr-29 18:57:44 LOG4 check_wapp_levels: WAPP-1 power levels: 0.938 0.535 1.096 1.015 2008-Apr-29 18:57:44 LOG4 check_wapp_levels: WAPP-2 power levels: 0.986 0.908 0.927 1.017 2008-Apr-29 18:57:44 LOG4 check_wapp_levels: WAPP-3 power levels: 1.079 0.891 0.993 1.126 2008-Apr-29 18:57:44 LOG4 check_wapp_levels: WAPP-4 power levels: 1.023 0.993 0.891 1.100 2008-Apr-29 18:57:46 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.800 and 1.127 2008-Apr-29 18:57:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.779 < 0.8)! 2008-Apr-29 18:57:54 LOG4 check_wapp_levels: WAPP-1 power levels: 0.939 0.779 1.098 1.016 2008-Apr-29 18:57:54 LOG4 check_wapp_levels: WAPP-2 power levels: 0.985 0.905 0.931 1.020 2008-Apr-29 18:57:54 LOG4 check_wapp_levels: WAPP-3 power levels: 1.080 0.893 0.992 1.127 2008-Apr-29 18:57:54 LOG4 check_wapp_levels: WAPP-4 power levels: 1.022 0.992 0.891 1.100 2008-Apr-29 18:57:56 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.885 and 1.126 2008-Apr-29 18:58:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.600 < 0.8)! 2008-Apr-29 18:58:08 LOG4 check_wapp_levels: WAPP-1 power levels: 0.941 0.600 1.094 1.016 2008-Apr-29 18:58:08 LOG4 check_wapp_levels: WAPP-2 power levels: 0.984 0.906 0.929 1.019 2008-Apr-29 18:58:08 LOG4 check_wapp_levels: WAPP-3 power levels: 1.079 0.891 0.994 1.124 2008-Apr-29 18:58:08 LOG4 check_wapp_levels: WAPP-4 power levels: 1.026 0.996 0.894 1.102 2008-Apr-29 18:58:10 INFO5 check_wapp_levels: WAPP power levels are between 0.579 and 1.124 (still bad) 2008-Apr-29 18:58:12 INFO5 check_wapp_levels: WAPP power levels are between 0.788 and 1.124 (still bad) 2008-Apr-29 18:58:14 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.891 and 1.125 2008-Apr-29 18:58:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.727 < 0.8)! 2008-Apr-29 18:58:16 LOG4 check_wapp_levels: WAPP-1 power levels: 0.939 0.727 1.096 1.015 2008-Apr-29 18:58:16 LOG4 check_wapp_levels: WAPP-2 power levels: 0.984 0.905 0.929 1.020 2008-Apr-29 18:58:16 LOG4 check_wapp_levels: WAPP-3 power levels: 1.079 0.892 0.994 1.126 2008-Apr-29 18:58:16 LOG4 check_wapp_levels: WAPP-4 power levels: 1.032 1.001 0.899 1.108 2008-Apr-29 18:58:18 INFO5 check_wapp_levels: WAPP power levels are between 0.785 and 1.125 (still bad) 2008-Apr-29 18:58:20 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.883 and 1.124 2008-Apr-29 18:58:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.726 < 0.8)! 2008-Apr-29 18:58:22 LOG4 check_wapp_levels: WAPP-1 power levels: 0.940 0.726 1.098 1.017 2008-Apr-29 18:58:22 LOG4 check_wapp_levels: WAPP-2 power levels: 0.984 0.905 0.931 1.020 2008-Apr-29 18:58:22 LOG4 check_wapp_levels: WAPP-3 power levels: 1.081 0.892 0.996 1.125 2008-Apr-29 18:58:22 LOG4 check_wapp_levels: WAPP-4 power levels: 1.030 0.999 0.898 1.106 2008-Apr-29 18:58:24 INFO5 check_wapp_levels: WAPP power levels are between 0.617 and 1.126 (still bad) 2008-Apr-29 18:58:26 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.838 and 1.126 2008-Apr-29 18:58:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.788 < 0.8)! 2008-Apr-29 18:58:30 LOG4 check_wapp_levels: WAPP-1 power levels: 0.940 0.788 1.099 1.019 2008-Apr-29 18:58:30 LOG4 check_wapp_levels: WAPP-2 power levels: 0.984 0.904 0.929 1.020 2008-Apr-29 18:58:30 LOG4 check_wapp_levels: WAPP-3 power levels: 1.080 0.893 0.994 1.126 2008-Apr-29 18:58:30 LOG4 check_wapp_levels: WAPP-4 power levels: 1.025 0.996 0.893 1.104 2008-Apr-29 18:58:32 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.807 and 1.126 2008-Apr-29 18:58:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.700 < 0.8)! 2008-Apr-29 18:58:40 LOG4 check_wapp_levels: WAPP-1 power levels: 0.940 0.700 1.098 1.018 2008-Apr-29 18:58:40 LOG4 check_wapp_levels: WAPP-2 power levels: 0.982 0.904 0.928 1.017 2008-Apr-29 18:58:40 LOG4 check_wapp_levels: WAPP-3 power levels: 1.082 0.892 0.995 1.129 2008-Apr-29 18:58:40 LOG4 check_wapp_levels: WAPP-4 power levels: 1.024 0.994 0.892 1.100 2008-Apr-29 18:58:42 INFO5 check_wapp_levels: WAPP power levels are between 0.709 and 1.131 (still bad) 2008-Apr-29 18:58:44 INFO5 check_wapp_levels: WAPP power levels are between 0.753 and 1.129 (still bad) 2008-Apr-29 18:58:46 INFO5 check_wapp_levels: WAPP power levels are between 0.749 and 1.129 (still bad) 2008-Apr-29 18:58:48 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.892 and 1.128 2008-Apr-29 18:58:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.753 < 0.8)! 2008-Apr-29 18:58:55 LOG4 check_wapp_levels: WAPP-1 power levels: 0.939 0.753 1.096 1.014 2008-Apr-29 18:58:55 LOG4 check_wapp_levels: WAPP-2 power levels: 0.985 0.904 0.928 1.019 2008-Apr-29 18:58:55 LOG4 check_wapp_levels: WAPP-3 power levels: 1.081 0.895 0.994 1.125 2008-Apr-29 18:58:55 LOG4 check_wapp_levels: WAPP-4 power levels: 1.025 0.994 0.893 1.101 2008-Apr-29 18:58:57 INFO5 check_wapp_levels: WAPP power levels are between 0.696 and 1.127 (still bad) 2008-Apr-29 18:58:59 INFO5 check_wapp_levels: WAPP power levels are between 0.698 and 1.125 (still bad) 2008-Apr-29 18:59:01 INFO5 check_wapp_levels: WAPP power levels are between 0.793 and 1.124 (still bad) 2008-Apr-29 18:59:03 INFO5 check_wapp_levels: WAPP power levels are between 0.770 and 1.126 (still bad) 2008-Apr-29 18:59:05 INFO5 check_wapp_levels: WAPP power levels are between 0.767 and 1.126 (still bad) 2008-Apr-29 18:59:07 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.835 and 1.126 2008-Apr-29 18:59:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.738 < 0.8)! 2008-Apr-29 18:59:11 LOG4 check_wapp_levels: WAPP-1 power levels: 0.939 0.738 1.097 1.014 2008-Apr-29 18:59:11 LOG4 check_wapp_levels: WAPP-2 power levels: 0.986 0.907 0.931 1.023 2008-Apr-29 18:59:11 LOG4 check_wapp_levels: WAPP-3 power levels: 1.077 0.892 0.995 1.127 2008-Apr-29 18:59:11 LOG4 check_wapp_levels: WAPP-4 power levels: 1.023 0.994 0.892 1.101 2008-Apr-29 18:59:13 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.830 and 1.126 2008-Apr-29 18:59:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.784 < 0.8)! 2008-Apr-29 18:59:15 LOG4 check_wapp_levels: WAPP-1 power levels: 0.941 0.784 1.096 1.013 2008-Apr-29 18:59:15 LOG4 check_wapp_levels: WAPP-2 power levels: 0.988 0.909 0.933 1.026 2008-Apr-29 18:59:15 LOG4 check_wapp_levels: WAPP-3 power levels: 1.076 0.891 0.994 1.126 2008-Apr-29 18:59:15 LOG4 check_wapp_levels: WAPP-4 power levels: 1.022 0.994 0.892 1.101 2008-Apr-29 18:59:17 INFO5 check_wapp_levels: WAPP power levels are between 0.733 and 1.126 (still bad) 2008-Apr-29 18:59:19 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.891 and 1.126 2008-Apr-29 18:59:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.579 < 0.8)! 2008-Apr-29 18:59:25 LOG4 check_wapp_levels: WAPP-1 power levels: 0.940 0.579 1.096 1.010 2008-Apr-29 18:59:25 LOG4 check_wapp_levels: WAPP-2 power levels: 0.988 0.908 0.931 1.020 2008-Apr-29 18:59:25 LOG4 check_wapp_levels: WAPP-3 power levels: 1.077 0.890 0.994 1.126 2008-Apr-29 18:59:25 LOG4 check_wapp_levels: WAPP-4 power levels: 1.022 0.992 0.891 1.099 2008-Apr-29 18:59:27 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.880 and 1.126 2008-Apr-29 18:59:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.782 < 0.8)! 2008-Apr-29 18:59:29 LOG4 check_wapp_levels: WAPP-1 power levels: 0.937 0.782 1.098 1.014 2008-Apr-29 18:59:29 LOG4 check_wapp_levels: WAPP-2 power levels: 0.986 0.908 0.929 1.019 2008-Apr-29 18:59:29 LOG4 check_wapp_levels: WAPP-3 power levels: 1.077 0.891 0.994 1.126 2008-Apr-29 18:59:29 LOG4 check_wapp_levels: WAPP-4 power levels: 1.021 0.992 0.889 1.099 2008-Apr-29 18:59:31 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.890 and 1.125 2008-Apr-29 18:59:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.778 < 0.8)! 2008-Apr-29 18:59:39 LOG4 check_wapp_levels: WAPP-1 power levels: 0.934 0.778 1.098 1.017 2008-Apr-29 18:59:39 LOG4 check_wapp_levels: WAPP-2 power levels: 0.989 0.909 0.930 1.019 2008-Apr-29 18:59:39 LOG4 check_wapp_levels: WAPP-3 power levels: 1.080 0.893 0.995 1.125 2008-Apr-29 18:59:39 LOG4 check_wapp_levels: WAPP-4 power levels: 1.020 0.992 0.889 1.098 2008-Apr-29 18:59:41 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.876 and 1.124 2008-Apr-29 18:59:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.652 < 0.8)! 2008-Apr-29 18:59:47 LOG4 check_wapp_levels: WAPP-1 power levels: 0.941 0.652 1.099 1.016 2008-Apr-29 18:59:47 LOG4 check_wapp_levels: WAPP-2 power levels: 0.986 0.908 0.930 1.021 2008-Apr-29 18:59:47 LOG4 check_wapp_levels: WAPP-3 power levels: 1.080 0.892 0.994 1.123 2008-Apr-29 18:59:47 LOG4 check_wapp_levels: WAPP-4 power levels: 1.020 0.992 0.890 1.098 2008-Apr-29 18:59:49 INFO5 check_wapp_levels: WAPP power levels are between 0.691 and 1.125 (still bad) 2008-Apr-29 18:59:51 INFO5 check_wapp_levels: WAPP power levels are between 0.780 and 1.125 (still bad) 2008-Apr-29 18:59:53 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.837 and 1.126 2008-Apr-29 19:00:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.731 < 0.8)! 2008-Apr-29 19:00:01 LOG4 check_wapp_levels: WAPP-1 power levels: 0.937 0.731 1.122 1.037 2008-Apr-29 19:00:01 LOG4 check_wapp_levels: WAPP-2 power levels: 0.984 0.904 0.931 1.020 2008-Apr-29 19:00:01 LOG4 check_wapp_levels: WAPP-3 power levels: 1.076 0.889 0.996 1.127 2008-Apr-29 19:00:01 LOG4 check_wapp_levels: WAPP-4 power levels: 1.020 0.992 0.890 1.098 2008-Apr-29 19:00:03 INFO5 check_wapp_levels: WAPP power levels are between 0.779 and 1.128 (still bad) 2008-Apr-29 19:00:05 INFO5 check_wapp_levels: WAPP power levels are between 0.677 and 1.127 (still bad) 2008-Apr-29 19:00:07 INFO5 check_wapp_levels: WAPP power levels are between 0.651 and 1.126 (still bad) 2008-Apr-29 19:00:09 INFO5 check_wapp_levels: WAPP power levels are between 0.733 and 1.126 (still bad) 2008-Apr-29 19:00:11 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.812 and 1.124 2008-Apr-29 19:00:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.732 < 0.8)! 2008-Apr-29 19:00:15 LOG4 check_wapp_levels: WAPP-1 power levels: 0.941 0.732 1.096 1.015 2008-Apr-29 19:00:15 LOG4 check_wapp_levels: WAPP-2 power levels: 0.990 0.911 0.928 1.017 2008-Apr-29 19:00:15 LOG4 check_wapp_levels: WAPP-3 power levels: 1.075 0.891 0.994 1.124 2008-Apr-29 19:00:15 LOG4 check_wapp_levels: WAPP-4 power levels: 1.029 1.003 0.896 1.109 2008-Apr-29 19:00:17 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.803 and 1.126 2008-Apr-29 19:00:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.791 < 0.8)! 2008-Apr-29 19:00:20 LOG4 check_wapp_levels: WAPP-1 power levels: 0.938 0.791 1.097 1.014 2008-Apr-29 19:00:20 LOG4 check_wapp_levels: WAPP-2 power levels: 0.991 0.913 0.928 1.018 2008-Apr-29 19:00:20 LOG4 check_wapp_levels: WAPP-3 power levels: 1.077 0.889 0.993 1.125 2008-Apr-29 19:00:20 LOG4 check_wapp_levels: WAPP-4 power levels: 1.039 1.013 0.906 1.121 2008-Apr-29 19:00:22 INFO5 check_wapp_levels: WAPP power levels are between 0.744 and 1.129 (still bad) 2008-Apr-29 19:00:24 INFO5 check_wapp_levels: WAPP power levels are between 0.735 and 1.132 (still bad) 2008-Apr-29 19:00:26 INFO5 check_wapp_levels: WAPP power levels are between 0.725 and 1.134 (still bad) 2008-Apr-29 19:00:28 INFO5 check_wapp_levels: WAPP power levels are between 0.578 and 1.134 (still bad) 2008-Apr-29 19:00:30 INFO5 check_wapp_levels: WAPP power levels are between 0.661 and 1.131 (still bad) 2008-Apr-29 19:00:32 INFO5 check_wapp_levels: WAPP power levels are between 0.750 and 1.125 (still bad) 2008-Apr-29 19:00:34 INFO5 check_wapp_levels: WAPP power levels are between 0.750 and 1.124 (still bad) 2008-Apr-29 19:00:36 INFO5 check_wapp_levels: WAPP power levels are between 0.621 and 1.125 (still bad) 2008-Apr-29 19:00:38 INFO5 check_wapp_levels: WAPP power levels are between 0.646 and 1.125 (still bad) 2008-Apr-29 19:00:40 INFO5 check_wapp_levels: WAPP power levels are between 0.691 and 1.124 (still bad) 2008-Apr-29 19:00:42 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.856 and 1.123 2008-Apr-29 19:00:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.648 < 0.8)! 2008-Apr-29 19:00:46 LOG4 check_wapp_levels: WAPP-1 power levels: 0.947 0.648 1.098 1.014 2008-Apr-29 19:00:46 LOG4 check_wapp_levels: WAPP-2 power levels: 0.984 0.902 0.926 1.017 2008-Apr-29 19:00:46 LOG4 check_wapp_levels: WAPP-3 power levels: 1.079 0.891 0.996 1.122 2008-Apr-29 19:00:46 LOG4 check_wapp_levels: WAPP-4 power levels: 1.021 0.996 0.891 1.101 2008-Apr-29 19:00:48 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.866 and 1.122 2008-Apr-29 19:00:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.797 < 0.8)! 2008-Apr-29 19:00:50 LOG4 check_wapp_levels: WAPP-1 power levels: 0.946 0.797 1.098 1.017 2008-Apr-29 19:00:50 LOG4 check_wapp_levels: WAPP-2 power levels: 0.983 0.903 0.927 1.017 2008-Apr-29 19:00:50 LOG4 check_wapp_levels: WAPP-3 power levels: 1.077 0.889 0.996 1.122 2008-Apr-29 19:00:50 LOG4 check_wapp_levels: WAPP-4 power levels: 1.021 0.996 0.889 1.102 2008-Apr-29 19:00:52 INFO5 check_wapp_levels: WAPP power levels are between 0.613 and 1.122 (still bad) 2008-Apr-29 19:00:54 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.824 and 1.122 2008-Apr-29 19:01:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.692 < 0.8)! 2008-Apr-29 19:01:00 LOG4 check_wapp_levels: WAPP-1 power levels: 0.938 0.692 1.098 1.019 2008-Apr-29 19:01:00 LOG4 check_wapp_levels: WAPP-2 power levels: 0.984 0.902 0.929 1.016 2008-Apr-29 19:01:00 LOG4 check_wapp_levels: WAPP-3 power levels: 1.077 0.891 0.999 1.126 2008-Apr-29 19:01:00 LOG4 check_wapp_levels: WAPP-4 power levels: 1.021 0.996 0.891 1.102 2008-Apr-29 19:01:02 INFO5 check_wapp_levels: WAPP power levels are between 0.686 and 1.126 (still bad) 2008-Apr-29 19:01:04 INFO5 check_wapp_levels: WAPP power levels are between 0.645 and 1.127 (still bad) 2008-Apr-29 19:01:06 INFO5 check_wapp_levels: WAPP power levels are between 0.670 and 1.127 (still bad) 2008-Apr-29 19:01:08 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.873 and 1.128 2008-Apr-29 19:01:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.777 < 0.8)! 2008-Apr-29 19:01:30 LOG4 check_wapp_levels: WAPP-1 power levels: 0.939 0.777 1.097 1.015 2008-Apr-29 19:01:30 LOG4 check_wapp_levels: WAPP-2 power levels: 0.982 0.903 0.926 1.016 2008-Apr-29 19:01:30 LOG4 check_wapp_levels: WAPP-3 power levels: 1.075 0.888 0.996 1.124 2008-Apr-29 19:01:30 LOG4 check_wapp_levels: WAPP-4 power levels: 1.020 0.992 0.889 1.096 2008-Apr-29 19:01:32 INFO5 check_wapp_levels: WAPP power levels are between 0.691 and 1.125 (still bad) 2008-Apr-29 19:01:34 INFO5 check_wapp_levels: WAPP power levels are between 0.771 and 1.125 (still bad) 2008-Apr-29 19:01:36 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.818 and 1.125 2008-Apr-29 19:01:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.768 < 0.8)! 2008-Apr-29 19:01:38 LOG4 check_wapp_levels: WAPP-1 power levels: 0.940 0.768 1.096 1.016 2008-Apr-29 19:01:38 LOG4 check_wapp_levels: WAPP-2 power levels: 0.981 0.902 0.926 1.017 2008-Apr-29 19:01:38 LOG4 check_wapp_levels: WAPP-3 power levels: 1.076 0.889 0.995 1.122 2008-Apr-29 19:01:38 LOG4 check_wapp_levels: WAPP-4 power levels: 1.020 0.993 0.888 1.098 2008-Apr-29 19:01:40 INFO5 check_wapp_levels: WAPP power levels are between 0.678 and 1.123 (still bad) 2008-Apr-29 19:01:43 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.859 and 1.124 2008-Apr-29 19:01:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.776 < 0.8)! 2008-Apr-29 19:01:59 LOG4 check_wapp_levels: WAPP-1 power levels: 0.939 0.776 1.098 1.015 2008-Apr-29 19:01:59 LOG4 check_wapp_levels: WAPP-2 power levels: 0.983 0.903 0.926 1.015 2008-Apr-29 19:01:59 LOG4 check_wapp_levels: WAPP-3 power levels: 1.076 0.889 0.992 1.124 2008-Apr-29 19:01:59 LOG4 check_wapp_levels: WAPP-4 power levels: 1.020 0.991 0.889 1.097 2008-Apr-29 19:02:01 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.879 and 1.123 2008-Apr-29 19:02:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.614 < 0.8)! 2008-Apr-29 19:02:03 LOG4 check_wapp_levels: WAPP-1 power levels: 0.938 0.614 1.097 1.014 2008-Apr-29 19:02:03 LOG4 check_wapp_levels: WAPP-2 power levels: 0.984 0.902 0.928 1.016 2008-Apr-29 19:02:03 LOG4 check_wapp_levels: WAPP-3 power levels: 1.076 0.890 0.993 1.123 2008-Apr-29 19:02:03 LOG4 check_wapp_levels: WAPP-4 power levels: 1.022 0.992 0.890 1.097 2008-Apr-29 19:02:05 INFO5 check_wapp_levels: WAPP power levels are between 0.728 and 1.122 (still bad) 2008-Apr-29 19:02:07 INFO5 check_wapp_levels: WAPP power levels are between 0.733 and 1.122 (still bad) 2008-Apr-29 19:02:09 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.833 and 1.123 2008-Apr-29 19:02:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.669 < 0.8)! 2008-Apr-29 19:02:11 LOG4 check_wapp_levels: WAPP-1 power levels: 0.935 0.669 1.097 1.014 2008-Apr-29 19:02:11 LOG4 check_wapp_levels: WAPP-2 power levels: 0.982 0.903 0.926 1.016 2008-Apr-29 19:02:11 LOG4 check_wapp_levels: WAPP-3 power levels: 1.077 0.890 0.994 1.122 2008-Apr-29 19:02:11 LOG4 check_wapp_levels: WAPP-4 power levels: 1.022 0.993 0.890 1.099 2008-Apr-29 19:02:13 INFO5 check_wapp_levels: WAPP power levels are between 0.749 and 1.124 (still bad) 2008-Apr-29 19:02:15 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.826 and 1.124 2008-Apr-29 19:02:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.610 < 0.8)! 2008-Apr-29 19:02:17 LOG4 check_wapp_levels: WAPP-1 power levels: 0.936 0.610 1.096 1.015 2008-Apr-29 19:02:17 LOG4 check_wapp_levels: WAPP-2 power levels: 0.982 0.903 0.926 1.016 2008-Apr-29 19:02:17 LOG4 check_wapp_levels: WAPP-3 power levels: 1.075 0.889 0.992 1.122 2008-Apr-29 19:02:17 LOG4 check_wapp_levels: WAPP-4 power levels: 1.022 0.995 0.890 1.101 2008-Apr-29 19:02:19 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.862 and 1.124 2008-Apr-29 19:02:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.745 < 0.8)! 2008-Apr-29 19:02:21 LOG4 check_wapp_levels: WAPP-1 power levels: 0.934 0.745 1.097 1.015 2008-Apr-29 19:02:21 LOG4 check_wapp_levels: WAPP-2 power levels: 0.985 0.903 0.926 1.015 2008-Apr-29 19:02:21 LOG4 check_wapp_levels: WAPP-3 power levels: 1.075 0.889 0.993 1.123 2008-Apr-29 19:02:21 LOG4 check_wapp_levels: WAPP-4 power levels: 1.022 0.994 0.891 1.100 2008-Apr-29 19:02:23 INFO5 check_wapp_levels: WAPP power levels are between 0.765 and 1.124 (still bad) 2008-Apr-29 19:02:25 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.816 and 1.123 2008-Apr-29 19:02:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.664 < 0.8)! 2008-Apr-29 19:02:39 LOG4 check_wapp_levels: WAPP-1 power levels: 0.938 0.664 1.097 1.016 2008-Apr-29 19:02:39 LOG4 check_wapp_levels: WAPP-2 power levels: 0.983 0.903 0.928 1.016 2008-Apr-29 19:02:39 LOG4 check_wapp_levels: WAPP-3 power levels: 1.076 0.890 0.992 1.122 2008-Apr-29 19:02:39 LOG4 check_wapp_levels: WAPP-4 power levels: 1.021 0.992 0.889 1.098 2008-Apr-29 19:02:41 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.815 and 1.123 2008-Apr-29 19:02:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.796 < 0.8)! 2008-Apr-29 19:02:43 LOG4 check_wapp_levels: WAPP-1 power levels: 0.935 0.796 1.097 1.015 2008-Apr-29 19:02:43 LOG4 check_wapp_levels: WAPP-2 power levels: 0.985 0.904 0.928 1.016 2008-Apr-29 19:02:43 LOG4 check_wapp_levels: WAPP-3 power levels: 1.076 0.892 0.995 1.124 2008-Apr-29 19:02:43 LOG4 check_wapp_levels: WAPP-4 power levels: 1.023 0.991 0.889 1.097 2008-Apr-29 19:02:45 INFO5 check_wapp_levels: WAPP power levels are between 0.744 and 1.124 (still bad) 2008-Apr-29 19:02:47 INFO5 check_wapp_levels: WAPP power levels are between 0.663 and 1.124 (still bad) 2008-Apr-29 19:02:49 INFO5 check_wapp_levels: WAPP power levels are between 0.658 and 1.124 (still bad) 2008-Apr-29 19:02:51 INFO5 check_wapp_levels: WAPP power levels are between 0.633 and 1.124 (still bad) 2008-Apr-29 19:02:53 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.863 and 1.124 2008-Apr-29 19:02:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.751 < 0.8)! 2008-Apr-29 19:02:55 LOG4 check_wapp_levels: WAPP-1 power levels: 0.937 0.751 1.097 1.016 2008-Apr-29 19:02:55 LOG4 check_wapp_levels: WAPP-2 power levels: 0.986 0.905 0.930 1.019 2008-Apr-29 19:02:55 LOG4 check_wapp_levels: WAPP-3 power levels: 1.077 0.890 0.994 1.124 2008-Apr-29 19:02:55 LOG4 check_wapp_levels: WAPP-4 power levels: 1.023 0.992 0.890 1.098 2008-Apr-29 19:02:57 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.882 and 1.124 2008-Apr-29 19:02:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.790 < 0.8)! 2008-Apr-29 19:02:59 LOG4 check_wapp_levels: WAPP-1 power levels: 0.935 0.790 1.097 1.016 2008-Apr-29 19:02:59 LOG4 check_wapp_levels: WAPP-2 power levels: 0.983 0.905 0.931 1.020 2008-Apr-29 19:02:59 LOG4 check_wapp_levels: WAPP-3 power levels: 1.078 0.890 0.996 1.125 2008-Apr-29 19:02:59 LOG4 check_wapp_levels: WAPP-4 power levels: 1.023 0.992 0.890 1.099 2008-Apr-29 19:03:01 INFO5 check_wapp_levels: WAPP power levels are between 0.761 and 1.124 (still bad) 2008-Apr-29 19:03:03 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.883 and 1.125 2008-Apr-29 19:03:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.618 < 0.8)! 2008-Apr-29 19:03:05 LOG4 check_wapp_levels: WAPP-1 power levels: 0.936 0.618 1.097 1.015 2008-Apr-29 19:03:05 LOG4 check_wapp_levels: WAPP-2 power levels: 0.982 0.903 0.930 1.021 2008-Apr-29 19:03:05 LOG4 check_wapp_levels: WAPP-3 power levels: 1.079 0.893 0.994 1.124 2008-Apr-29 19:03:05 LOG4 check_wapp_levels: WAPP-4 power levels: 1.022 0.992 0.889 1.099 2008-Apr-29 19:03:07 INFO5 check_wapp_levels: WAPP power levels are between 0.699 and 1.124 (still bad) 2008-Apr-29 19:03:09 INFO5 check_wapp_levels: WAPP power levels are between 0.614 and 1.123 (still bad) 2008-Apr-29 19:03:11 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.859 and 1.124 2008-Apr-29 19:03:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.697 < 0.8)! 2008-Apr-29 19:03:14 LOG4 check_wapp_levels: WAPP-1 power levels: 0.941 0.697 1.096 1.014 2008-Apr-29 19:03:14 LOG4 check_wapp_levels: WAPP-2 power levels: 0.982 0.903 0.932 1.021 2008-Apr-29 19:03:14 LOG4 check_wapp_levels: WAPP-3 power levels: 1.079 0.891 0.993 1.124 2008-Apr-29 19:03:14 LOG4 check_wapp_levels: WAPP-4 power levels: 1.022 0.991 0.890 1.100 2008-Apr-29 19:03:16 INFO5 check_wapp_levels: WAPP power levels are between 0.651 and 1.125 (still bad) 2008-Apr-29 19:03:18 INFO5 check_wapp_levels: WAPP power levels are between 0.773 and 1.127 (still bad) 2008-Apr-29 19:03:20 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.842 and 1.126 2008-Apr-29 19:03:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.731 < 0.8)! 2008-Apr-29 19:03:28 LOG4 check_wapp_levels: WAPP-1 power levels: 0.939 0.731 1.099 1.019 2008-Apr-29 19:03:28 LOG4 check_wapp_levels: WAPP-2 power levels: 0.983 0.905 0.943 1.035 2008-Apr-29 19:03:28 LOG4 check_wapp_levels: WAPP-3 power levels: 1.081 0.893 0.995 1.125 2008-Apr-29 19:03:28 LOG4 check_wapp_levels: WAPP-4 power levels: 1.023 0.993 0.890 1.099 2008-Apr-29 19:03:30 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.804 and 1.127 2008-Apr-29 19:03:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.648 < 0.8)! 2008-Apr-29 19:03:32 LOG4 check_wapp_levels: WAPP-1 power levels: 0.940 0.648 1.100 1.018 2008-Apr-29 19:03:32 LOG4 check_wapp_levels: WAPP-2 power levels: 0.983 0.905 0.942 1.033 2008-Apr-29 19:03:32 LOG4 check_wapp_levels: WAPP-3 power levels: 1.083 0.894 0.996 1.128 2008-Apr-29 19:03:32 LOG4 check_wapp_levels: WAPP-4 power levels: 1.023 0.993 0.891 1.100 2008-Apr-29 19:03:34 INFO5 check_wapp_levels: WAPP power levels are between 0.594 and 1.127 (still bad) 2008-Apr-29 19:03:36 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.891 and 1.127 2008-Apr-29 19:03:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.688 < 0.8)! 2008-Apr-29 19:03:38 LOG4 check_wapp_levels: WAPP-1 power levels: 0.938 0.688 1.099 1.017 2008-Apr-29 19:03:38 LOG4 check_wapp_levels: WAPP-2 power levels: 0.984 0.906 0.936 1.027 2008-Apr-29 19:03:38 LOG4 check_wapp_levels: WAPP-3 power levels: 1.087 0.897 0.996 1.128 2008-Apr-29 19:03:38 LOG4 check_wapp_levels: WAPP-4 power levels: 1.025 0.994 0.891 1.101 2008-Apr-29 19:03:40 INFO5 check_wapp_levels: WAPP power levels are between 0.799 and 1.128 (still bad) 2008-Apr-29 19:03:42 INFO5 check_wapp_levels: WAPP power levels are between 0.794 and 1.129 (still bad) 2008-Apr-29 19:03:44 INFO5 check_wapp_levels: WAPP power levels are between 0.777 and 1.127 (still bad) 2008-Apr-29 19:03:46 INFO5 check_wapp_levels: WAPP power levels are between 0.627 and 1.126 (still bad) 2008-Apr-29 19:03:48 INFO5 check_wapp_levels: WAPP power levels are between 0.790 and 1.128 (still bad) 2008-Apr-29 19:03:50 INFO5 check_wapp_levels: WAPP power levels are between 0.798 and 1.129 (still bad) 2008-Apr-29 19:03:52 INFO5 check_wapp_levels: WAPP power levels are between 0.625 and 1.127 (still bad) 2008-Apr-29 19:03:54 INFO5 check_wapp_levels: WAPP power levels are between 0.543 and 1.127 (still bad) 2008-Apr-29 19:03:56 INFO5 check_wapp_levels: WAPP power levels are between 0.740 and 1.126 (still bad) 2008-Apr-29 19:03:58 INFO5 check_wapp_levels: WAPP power levels are between 0.650 and 1.127 (still bad) 2008-Apr-29 19:04:00 INFO5 check_wapp_levels: WAPP power levels are between 0.779 and 1.127 (still bad) 2008-Apr-29 19:04:02 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.833 and 1.128 2008-Apr-29 19:04:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.780 < 0.8)! 2008-Apr-29 19:04:16 LOG4 check_wapp_levels: WAPP-1 power levels: 0.936 0.780 1.102 1.018 2008-Apr-29 19:04:16 LOG4 check_wapp_levels: WAPP-2 power levels: 0.987 0.909 0.928 1.017 2008-Apr-29 19:04:16 LOG4 check_wapp_levels: WAPP-3 power levels: 1.097 0.904 0.998 1.129 2008-Apr-29 19:04:16 LOG4 check_wapp_levels: WAPP-4 power levels: 1.024 0.993 0.891 1.100 2008-Apr-29 19:04:18 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.872 and 1.128 2008-Apr-29 19:04:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.691 < 0.8)! 2008-Apr-29 19:04:22 LOG4 check_wapp_levels: WAPP-1 power levels: 0.938 0.691 1.099 1.017 2008-Apr-29 19:04:22 LOG4 check_wapp_levels: WAPP-2 power levels: 0.984 0.907 0.928 1.017 2008-Apr-29 19:04:22 LOG4 check_wapp_levels: WAPP-3 power levels: 1.089 0.898 0.997 1.129 2008-Apr-29 19:04:22 LOG4 check_wapp_levels: WAPP-4 power levels: 1.025 0.994 0.891 1.102 2008-Apr-29 19:04:24 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.800 and 1.128 2008-Apr-29 19:04:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.794 < 0.8)! 2008-Apr-29 19:04:28 LOG4 check_wapp_levels: WAPP-1 power levels: 0.937 0.794 1.099 1.017 2008-Apr-29 19:04:28 LOG4 check_wapp_levels: WAPP-2 power levels: 0.988 0.909 0.930 1.018 2008-Apr-29 19:04:28 LOG4 check_wapp_levels: WAPP-3 power levels: 1.085 0.895 0.997 1.129 2008-Apr-29 19:04:28 LOG4 check_wapp_levels: WAPP-4 power levels: 1.026 0.995 0.892 1.103 2008-Apr-29 19:04:30 INFO5 check_wapp_levels: WAPP power levels are between 0.633 and 1.129 (still bad) 2008-Apr-29 19:04:32 INFO5 check_wapp_levels: WAPP power levels are between 0.693 and 1.129 (still bad) 2008-Apr-29 19:04:35 INFO5 check_wapp_levels: WAPP power levels are between 0.662 and 1.130 (still bad) 2008-Apr-29 19:04:37 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.873 and 1.130 2008-Apr-29 19:04:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.772 < 0.8)! 2008-Apr-29 19:04:49 LOG4 check_wapp_levels: WAPP-1 power levels: 0.939 0.772 1.100 1.015 2008-Apr-29 19:04:49 LOG4 check_wapp_levels: WAPP-2 power levels: 0.993 0.913 0.927 1.017 2008-Apr-29 19:04:49 LOG4 check_wapp_levels: WAPP-3 power levels: 1.082 0.893 0.998 1.130 2008-Apr-29 19:04:49 LOG4 check_wapp_levels: WAPP-4 power levels: 1.026 0.994 0.893 1.102 2008-Apr-29 19:04:51 INFO5 check_wapp_levels: WAPP power levels are between 0.794 and 1.131 (still bad) 2008-Apr-29 19:04:53 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.800 and 1.130 2008-Apr-29 19:04:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.743 < 0.8)! 2008-Apr-29 19:04:57 LOG4 check_wapp_levels: WAPP-1 power levels: 0.945 0.743 1.098 1.015 2008-Apr-29 19:04:57 LOG4 check_wapp_levels: WAPP-2 power levels: 0.983 0.906 0.928 1.017 2008-Apr-29 19:04:57 LOG4 check_wapp_levels: WAPP-3 power levels: 1.083 0.894 0.996 1.129 2008-Apr-29 19:04:57 LOG4 check_wapp_levels: WAPP-4 power levels: 1.027 0.996 0.894 1.104 2008-Apr-29 19:04:59 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.818 and 1.130 2008-Apr-29 19:05:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.771 < 0.8)! 2008-Apr-29 19:05:01 LOG4 check_wapp_levels: WAPP-1 power levels: 0.956 0.771 1.099 1.016 2008-Apr-29 19:05:01 LOG4 check_wapp_levels: WAPP-2 power levels: 0.982 0.905 0.927 1.018 2008-Apr-29 19:05:01 LOG4 check_wapp_levels: WAPP-3 power levels: 1.081 0.895 0.997 1.130 2008-Apr-29 19:05:01 LOG4 check_wapp_levels: WAPP-4 power levels: 1.029 0.996 0.895 1.103 2008-Apr-29 19:05:03 INFO5 check_wapp_levels: WAPP power levels are between 0.746 and 1.132 (still bad) 2008-Apr-29 19:05:05 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.847 and 1.132 2008-Apr-29 19:05:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.780 < 0.8)! 2008-Apr-29 19:05:09 LOG4 check_wapp_levels: WAPP-1 power levels: 0.955 0.780 1.098 1.015 2008-Apr-29 19:05:09 LOG4 check_wapp_levels: WAPP-2 power levels: 0.983 0.907 0.928 1.018 2008-Apr-29 19:05:09 LOG4 check_wapp_levels: WAPP-3 power levels: 1.083 0.896 0.999 1.131 2008-Apr-29 19:05:09 LOG4 check_wapp_levels: WAPP-4 power levels: 1.029 0.995 0.895 1.102 2008-Apr-29 19:05:11 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.803 and 1.130 2008-Apr-29 19:05:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.556 < 0.8)! 2008-Apr-29 19:05:13 LOG4 check_wapp_levels: WAPP-1 power levels: 0.950 0.556 1.096 1.014 2008-Apr-29 19:05:13 LOG4 check_wapp_levels: WAPP-2 power levels: 0.984 0.908 0.928 1.018 2008-Apr-29 19:05:13 LOG4 check_wapp_levels: WAPP-3 power levels: 1.083 0.894 0.997 1.130 2008-Apr-29 19:05:13 LOG4 check_wapp_levels: WAPP-4 power levels: 1.028 0.996 0.894 1.105 2008-Apr-29 19:05:15 INFO5 check_wapp_levels: WAPP power levels are between 0.701 and 1.129 (still bad) 2008-Apr-29 19:05:17 INFO5 check_wapp_levels: WAPP power levels are between 0.595 and 1.130 (still bad) 2008-Apr-29 19:05:19 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.866 and 1.131 2008-Apr-29 19:05:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.680 < 0.8)! 2008-Apr-29 19:05:21 LOG4 check_wapp_levels: WAPP-1 power levels: 0.939 0.680 1.096 1.012 2008-Apr-29 19:05:21 LOG4 check_wapp_levels: WAPP-2 power levels: 0.986 0.908 0.928 1.017 2008-Apr-29 19:05:21 LOG4 check_wapp_levels: WAPP-3 power levels: 1.084 0.895 0.999 1.130 2008-Apr-29 19:05:21 LOG4 check_wapp_levels: WAPP-4 power levels: 1.028 0.996 0.894 1.104 2008-Apr-29 19:05:23 INFO5 check_wapp_levels: WAPP power levels are between 0.696 and 1.130 (still bad) 2008-Apr-29 19:05:25 INFO5 check_wapp_levels: WAPP power levels are between 0.772 and 1.132 (still bad) 2008-Apr-29 19:05:27 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.837 and 1.133 2008-Apr-29 19:05:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.717 < 0.8)! 2008-Apr-29 19:05:31 LOG4 check_wapp_levels: WAPP-1 power levels: 0.936 0.717 1.098 1.012 2008-Apr-29 19:05:31 LOG4 check_wapp_levels: WAPP-2 power levels: 0.986 0.910 0.928 1.018 2008-Apr-29 19:05:31 LOG4 check_wapp_levels: WAPP-3 power levels: 1.084 0.895 1.001 1.133 2008-Apr-29 19:05:31 LOG4 check_wapp_levels: WAPP-4 power levels: 1.027 0.997 0.894 1.103 2008-Apr-29 19:05:33 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.868 and 1.132 2008-Apr-29 19:05:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.764 < 0.8)! 2008-Apr-29 19:05:43 LOG4 check_wapp_levels: WAPP-1 power levels: 0.938 0.764 1.096 1.013 2008-Apr-29 19:05:43 LOG4 check_wapp_levels: WAPP-2 power levels: 0.982 0.907 0.928 1.017 2008-Apr-29 19:05:43 LOG4 check_wapp_levels: WAPP-3 power levels: 1.085 0.897 0.997 1.129 2008-Apr-29 19:05:43 LOG4 check_wapp_levels: WAPP-4 power levels: 1.028 0.995 0.894 1.101 2008-Apr-29 19:05:45 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.863 and 1.131 2008-Apr-29 19:05:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.744 < 0.8)! 2008-Apr-29 19:06:00 LOG4 check_wapp_levels: WAPP-1 power levels: 0.937 0.744 1.096 1.012 2008-Apr-29 19:06:00 LOG4 check_wapp_levels: WAPP-2 power levels: 0.982 0.906 0.928 1.017 2008-Apr-29 19:06:00 LOG4 check_wapp_levels: WAPP-3 power levels: 1.086 0.896 0.998 1.131 2008-Apr-29 19:06:00 LOG4 check_wapp_levels: WAPP-4 power levels: 1.025 0.996 0.893 1.102 2008-Apr-29 19:06:02 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.803 and 1.130 2008-Apr-29 19:06:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.791 < 0.8)! 2008-Apr-29 19:06:04 LOG4 check_wapp_levels: WAPP-1 power levels: 0.936 0.791 1.098 1.014 2008-Apr-29 19:06:04 LOG4 check_wapp_levels: WAPP-2 power levels: 0.981 0.905 0.927 1.017 2008-Apr-29 19:06:04 LOG4 check_wapp_levels: WAPP-3 power levels: 1.086 0.896 0.997 1.129 2008-Apr-29 19:06:04 LOG4 check_wapp_levels: WAPP-4 power levels: 1.026 0.996 0.894 1.103 2008-Apr-29 19:06:06 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.874 and 1.130 2008-Apr-29 19:06:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.759 < 0.8)! 2008-Apr-29 19:06:08 LOG4 check_wapp_levels: WAPP-1 power levels: 0.935 0.759 1.097 1.015 2008-Apr-29 19:06:08 LOG4 check_wapp_levels: WAPP-2 power levels: 0.981 0.905 0.928 1.016 2008-Apr-29 19:06:08 LOG4 check_wapp_levels: WAPP-3 power levels: 1.086 0.897 0.998 1.129 2008-Apr-29 19:06:08 LOG4 check_wapp_levels: WAPP-4 power levels: 1.029 0.999 0.896 1.106 2008-Apr-29 19:06:10 INFO5 check_wapp_levels: WAPP power levels are between 0.751 and 1.130 (still bad) 2008-Apr-29 19:06:12 INFO5 check_wapp_levels: WAPP power levels are between 0.765 and 1.129 (still bad) 2008-Apr-29 19:06:14 INFO5 check_wapp_levels: WAPP power levels are between 0.688 and 1.129 (still bad) 2008-Apr-29 19:06:16 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.890 and 1.128 2008-Apr-29 19:06:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.784 < 0.8)! 2008-Apr-29 19:06:26 LOG4 check_wapp_levels: WAPP-1 power levels: 0.935 0.784 1.097 1.014 2008-Apr-29 19:06:26 LOG4 check_wapp_levels: WAPP-2 power levels: 0.983 0.906 0.928 1.017 2008-Apr-29 19:06:26 LOG4 check_wapp_levels: WAPP-3 power levels: 1.084 0.897 0.996 1.129 2008-Apr-29 19:06:26 LOG4 check_wapp_levels: WAPP-4 power levels: 1.028 0.994 0.894 1.101 2008-Apr-29 19:06:28 INFO5 check_wapp_levels: WAPP power levels are between 0.757 and 1.129 (still bad) 2008-Apr-29 19:06:30 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.840 and 1.128 2008-Apr-29 19:06:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.715 < 0.8)! 2008-Apr-29 19:06:32 LOG4 check_wapp_levels: WAPP-1 power levels: 0.938 0.715 1.097 1.013 2008-Apr-29 19:06:32 LOG4 check_wapp_levels: WAPP-2 power levels: 0.980 0.906 0.929 1.016 2008-Apr-29 19:06:32 LOG4 check_wapp_levels: WAPP-3 power levels: 1.085 0.898 0.996 1.127 2008-Apr-29 19:06:32 LOG4 check_wapp_levels: WAPP-4 power levels: 1.025 0.992 0.892 1.101 2008-Apr-29 19:06:34 INFO5 check_wapp_levels: WAPP power levels are between 0.798 and 1.127 (still bad) 2008-Apr-29 19:06:36 INFO5 check_wapp_levels: WAPP power levels are between 0.794 and 1.129 (still bad) 2008-Apr-29 19:06:38 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.893 and 1.129 2008-Apr-29 19:06:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.765 < 0.8)! 2008-Apr-29 19:06:42 LOG4 check_wapp_levels: WAPP-1 power levels: 0.939 0.765 1.098 1.014 2008-Apr-29 19:06:42 LOG4 check_wapp_levels: WAPP-2 power levels: 0.984 0.906 0.928 1.017 2008-Apr-29 19:06:42 LOG4 check_wapp_levels: WAPP-3 power levels: 1.086 0.896 0.995 1.128 2008-Apr-29 19:06:42 LOG4 check_wapp_levels: WAPP-4 power levels: 1.026 0.992 0.893 1.100 2008-Apr-29 19:06:44 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.831 and 1.129 2008-Apr-29 19:06:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.773 < 0.8)! 2008-Apr-29 19:06:50 LOG4 check_wapp_levels: WAPP-1 power levels: 0.935 0.773 1.097 1.012 2008-Apr-29 19:06:50 LOG4 check_wapp_levels: WAPP-2 power levels: 0.984 0.907 0.930 1.017 2008-Apr-29 19:06:50 LOG4 check_wapp_levels: WAPP-3 power levels: 1.085 0.895 0.995 1.129 2008-Apr-29 19:06:50 LOG4 check_wapp_levels: WAPP-4 power levels: 1.025 0.992 0.892 1.100 2008-Apr-29 19:06:52 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.876 and 1.130 2008-Apr-29 19:06:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.788 < 0.8)! 2008-Apr-29 19:06:56 LOG4 check_wapp_levels: WAPP-1 power levels: 0.937 0.788 1.097 1.012 2008-Apr-29 19:06:56 LOG4 check_wapp_levels: WAPP-2 power levels: 0.984 0.906 0.929 1.019 2008-Apr-29 19:06:56 LOG4 check_wapp_levels: WAPP-3 power levels: 1.084 0.897 0.995 1.129 2008-Apr-29 19:06:56 LOG4 check_wapp_levels: WAPP-4 power levels: 1.026 0.992 0.892 1.099 2008-Apr-29 19:06:58 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.891 and 1.129 2008-Apr-29 19:07:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.768 < 0.8)! 2008-Apr-29 19:07:06 LOG4 check_wapp_levels: WAPP-1 power levels: 0.941 0.768 1.097 1.011 2008-Apr-29 19:07:06 LOG4 check_wapp_levels: WAPP-2 power levels: 0.986 0.907 0.930 1.020 2008-Apr-29 19:07:06 LOG4 check_wapp_levels: WAPP-3 power levels: 1.085 0.897 0.992 1.129 2008-Apr-29 19:07:06 LOG4 check_wapp_levels: WAPP-4 power levels: 1.026 0.993 0.892 1.099 2008-Apr-29 19:07:08 INFO5 check_wapp_levels: WAPP power levels are between 0.756 and 1.128 (still bad) 2008-Apr-29 19:07:10 INFO5 check_wapp_levels: WAPP power levels are between 0.780 and 1.128 (still bad) 2008-Apr-29 19:07:12 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.809 and 1.129 2008-Apr-29 19:07:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.638 < 0.8)! 2008-Apr-29 19:07:14 LOG4 check_wapp_levels: WAPP-1 power levels: 0.943 0.638 1.098 1.013 2008-Apr-29 19:07:14 LOG4 check_wapp_levels: WAPP-2 power levels: 0.984 0.906 0.931 1.019 2008-Apr-29 19:07:14 LOG4 check_wapp_levels: WAPP-3 power levels: 1.086 0.896 0.996 1.127 2008-Apr-29 19:07:14 LOG4 check_wapp_levels: WAPP-4 power levels: 1.025 0.993 0.892 1.100 2008-Apr-29 19:07:16 INFO5 check_wapp_levels: WAPP power levels are between 0.785 and 1.129 (still bad) 2008-Apr-29 19:07:18 INFO5 check_wapp_levels: WAPP power levels are between 0.775 and 1.128 (still bad) 2008-Apr-29 19:07:20 INFO5 check_wapp_levels: WAPP power levels are between 0.722 and 1.128 (still bad) 2008-Apr-29 19:07:23 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.829 and 1.128 2008-Apr-29 19:07:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.728 < 0.8)! 2008-Apr-29 19:07:27 LOG4 check_wapp_levels: WAPP-1 power levels: 0.937 0.728 1.101 1.018 2008-Apr-29 19:07:27 LOG4 check_wapp_levels: WAPP-2 power levels: 0.986 0.908 0.928 1.019 2008-Apr-29 19:07:27 LOG4 check_wapp_levels: WAPP-3 power levels: 1.084 0.898 0.996 1.129 2008-Apr-29 19:07:27 LOG4 check_wapp_levels: WAPP-4 power levels: 1.024 0.992 0.892 1.099 2008-Apr-29 19:07:29 INFO5 check_wapp_levels: WAPP power levels are between 0.622 and 1.129 (still bad) 2008-Apr-29 19:07:31 INFO5 check_wapp_levels: WAPP power levels are between 0.673 and 1.128 (still bad) 2008-Apr-29 19:07:33 INFO5 check_wapp_levels: WAPP power levels are between 0.703 and 1.128 (still bad) 2008-Apr-29 19:07:35 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.892 and 1.128 2008-Apr-29 19:07:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.786 < 0.8)! 2008-Apr-29 19:07:59 LOG4 check_wapp_levels: WAPP-1 power levels: 0.943 0.786 1.099 1.013 2008-Apr-29 19:07:59 LOG4 check_wapp_levels: WAPP-2 power levels: 0.984 0.903 0.939 1.027 2008-Apr-29 19:07:59 LOG4 check_wapp_levels: WAPP-3 power levels: 1.084 0.896 0.997 1.127 2008-Apr-29 19:07:59 LOG4 check_wapp_levels: WAPP-4 power levels: 1.024 0.994 0.893 1.100 2008-Apr-29 19:08:01 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.872 and 1.127 2008-Apr-29 19:08:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.660 < 0.8)! 2008-Apr-29 19:08:09 LOG4 check_wapp_levels: WAPP-1 power levels: 0.938 0.660 1.098 1.013 2008-Apr-29 19:08:09 LOG4 check_wapp_levels: WAPP-2 power levels: 0.984 0.904 0.931 1.018 2008-Apr-29 19:08:09 LOG4 check_wapp_levels: WAPP-3 power levels: 1.083 0.895 0.996 1.129 2008-Apr-29 19:08:09 LOG4 check_wapp_levels: WAPP-4 power levels: 1.024 0.994 0.892 1.100 2008-Apr-29 19:08:11 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.866 and 1.128 2008-Apr-29 19:08:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.720 < 0.8)! 2008-Apr-29 19:08:23 LOG4 check_wapp_levels: WAPP-1 power levels: 0.941 0.720 1.098 1.013 2008-Apr-29 19:08:23 LOG4 check_wapp_levels: WAPP-2 power levels: 0.984 0.904 0.928 1.017 2008-Apr-29 19:08:23 LOG4 check_wapp_levels: WAPP-3 power levels: 1.083 0.894 0.997 1.128 2008-Apr-29 19:08:23 LOG4 check_wapp_levels: WAPP-4 power levels: 1.023 0.992 0.892 1.099 2008-Apr-29 19:08:25 INFO5 check_wapp_levels: WAPP power levels are between 0.582 and 1.129 (still bad) 2008-Apr-29 19:08:27 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.833 and 1.130 2008-Apr-29 19:08:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-29 19:08:28 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-29 19:08:28 LOG5 end_task: Level: (4) ID = <10132> Status = 0 0 0 0 ok 2008-Apr-29 19:08:28 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-29 19:08:28 LOG5 end_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2008-Apr-29 19:08:28 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-29 19:08:28 LOG5 finish_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2008-Apr-29 19:08:28 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-29 19:08:28 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-29 19:08:28 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-29 19:08:28 LOG5 end_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2008-Apr-29 19:08:28 COMMAND run_command_line: EXECUTING command 11: 'FIXEDDRIFT az=235.63 alfaangle=-35.7 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p1_004 ra=95300.00 dec=234830.00' 2008-Apr-29 19:08:28 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-29 19:08:29 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-29 19:08:29 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 235.63 -35.7 hcorcal 5 tracking no first 1 AGES3193_p1_004 95300.00 234830.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-29 19:08:29 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-29 19:08:29 LOG5 begin_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2008-Apr-29 19:08:29 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES3193_p1_002' 2008-Apr-29 19:08:29 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-29 19:08:29 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p1_004} 2008-Apr-29 19:08:29 INFO3 fixed_driftmap: Sending telescope to Az = 235.63 and ZA = 9.99 2008-Apr-29 19:08:29 LOG3 track_source: Calling 'track_source AGES3193_p1_004 235.63 9.9899658987 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-29 19:08:29 START begin_task: Starting task 'sending tracking commands' 2008-Apr-29 19:08:29 LOG5 begin_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2008-Apr-29 19:08:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p1_004} INFO {Slewing to source 'AGES3193_p1_004' ...} 2008-Apr-29 19:08:29 INFO1 track_source: Starting to track AGES3193_p1_004 2008-Apr-29 19:08:29 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p1_004" 2008-Apr-29 19:08:29 LOG3 vw_send: To DATATAKING: set ra 235.63 2008-Apr-29 19:08:29 LOG3 vw_send: To DATATAKING: set dec 9.9899658987 2008-Apr-29 19:08:29 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-29 19:08:29 LOG3 vw_send: To DATATAKING: pnt tr 235.63 9.9899658987 -CF 2008-Apr-29 19:08:29 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-29 19:08:29 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-29 19:08:29 LOG5 finish_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2008-Apr-29 19:08:29 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-29 19:08:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 19:08:29 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-29 19:08:29 LOG5 end_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2008-Apr-29 19:08:29 START begin_task: Starting task 'rotate ALFA to -35.7 degrees' 2008-Apr-29 19:08:29 LOG5 begin_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2008-Apr-29 19:08:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -35.7 degrees ...} 2008-Apr-29 19:08:29 INFO2 rotate_alfa: ALFA commanded to -35.7 degrees 2008-Apr-29 19:08:29 LOG3 sock_errsend: To ALFAMOTOR: POSITION -35.7 REPLY 2008-Apr-29 19:08:29 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-29 19:08:29 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-29 19:08:29 LOG5 begin_task: Level: (4) ID = <10136> Status = 0 0 0 0 ok 2008-Apr-29 19:08:29 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p1_004" 2008-Apr-29 19:08:29 LOG4 got_cormsg: From DATATAKING: set ra 235.63 2008-Apr-29 19:08:29 LOG4 got_cormsg: From DATATAKING: set dec 9.9899658987 2008-Apr-29 19:08:29 LOG4 got_cormsg: From DATATAKING: vw% 235.63 2008-Apr-29 19:08:29 LOG4 got_cormsg: From DATATAKING: vw% 9.9899658987 2008-Apr-29 19:08:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 19:08:29 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-29 19:08:29 LOG4 got_cormsg: From DATATAKING: pnt tr 235.63 9.9899658987 -CF 2008-Apr-29 19:08:29 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-29 19:08:29 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2008-Apr-29 19:08:38 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-29 19:08:38 INFO3 alfa_motor: ALFA rotator in-position -35.70 degrees 2008-Apr-29 19:08:38 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-29 19:08:38 LOG5 end_task: Level: (4) ID = <10136> Status = 0 0 0 0 ok 2008-Apr-29 19:08:38 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-29 19:08:38 STOP finish_task: Finishing task 'rotate ALFA to -35.7 degrees' 2008-Apr-29 19:08:38 LOG5 finish_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2008-Apr-29 19:08:38 INFO2 finish_task: DONE finished configuration: rotating ALFA to -35.7 degrees 2008-Apr-29 19:08:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 19:08:38 STOP end_task: Finishing task 'rotate ALFA to -35.7 degrees' with status 'OK' 2008-Apr-29 19:08:38 LOG5 end_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2008-Apr-29 19:08:38 START begin_task: Starting task 'waiting on telescope' 2008-Apr-29 19:08:38 LOG5 begin_task: Level: (3) ID = <10137> Status = 0 0 0 0 ok 2008-Apr-29 19:08:38 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-29 19:08:38 LOG3 waittrk: Start waittrk 5 2008-Apr-29 19:08:38 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-29 19:08:38 LOG5 begin_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2008-Apr-29 19:08:43 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-29 19:08:43 LOG5 end_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2008-Apr-29 19:08:43 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-29 19:08:43 LOG5 begin_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2008-Apr-29 19:10:34 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-29 19:10:34 LOG5 end_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2008-Apr-29 19:10:34 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-29 19:10:34 INFO2 waittrk: Now tracking AGES3193_p1_004 2008-Apr-29 19:10:34 LOG4 waittrk: Current telescope position: Az = 235.16 ZA = 10.00 2008-Apr-29 19:10:34 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-29 19:10:34 LOG5 finish_task: Level: (3) ID = <10137> Status = 0 0 0 0 ok 2008-Apr-29 19:10:34 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-29 19:10:34 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 19:10:34 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-29 19:10:34 LOG5 end_task: Level: (3) ID = <10137> Status = 0 0 0 0 ok 2008-Apr-29 19:10:34 START begin_task: Starting task 'selecting calibration type' 2008-Apr-29 19:10:34 LOG5 begin_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2008-Apr-29 19:10:34 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-29 19:10:34 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-29 19:10:34 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 19:10:34 START begin_task: Starting task 'waiting on setcal' 2008-Apr-29 19:10:34 LOG5 begin_task: Level: (4) ID = <10141> Status = 0 0 0 0 ok 2008-Apr-29 19:10:35 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-29 19:10:35 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 19:10:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 19:10:35 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-29 19:10:35 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-29 19:10:35 LOG5 end_task: Level: (4) ID = <10141> Status = 0 0 0 0 ok 2008-Apr-29 19:10:35 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-29 19:10:35 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-29 19:10:35 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-29 19:10:35 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-29 19:10:35 LOG5 begin_task: Level: (4) ID = <10142> Status = 0 0 0 0 ok 2008-Apr-29 19:10:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 19:10:36 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-29 19:10:36 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-29 19:10:36 LOG5 end_task: Level: (4) ID = <10142> Status = 0 0 0 0 ok 2008-Apr-29 19:10:36 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-29 19:10:36 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-29 19:10:36 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-29 19:10:36 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-29 19:10:36 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-29 19:10:36 LOG5 begin_task: Level: (4) ID = <10143> Status = 0 0 0 0 ok 2008-Apr-29 19:10:36 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-29 19:10:36 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-29 19:10:36 LOG5 end_task: Level: (4) ID = <10143> Status = 0 0 0 0 ok 2008-Apr-29 19:10:36 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-29 19:10:36 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-29 19:10:36 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-29 19:10:36 LOG5 finish_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2008-Apr-29 19:10:36 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-29 19:10:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 19:10:36 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-29 19:10:36 LOG5 end_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2008-Apr-29 19:10:36 LOG5 dopset_later: Calling 'dopset_later 49.364154810201327' 2008-Apr-29 19:10:36 INFO3 dopset_later: Setting Doppler correction for 19:11:24 (49.4 seconds from now) 2008-Apr-29 19:10:36 LOG5 antvel: Calling 'antvel 235.630000 9.989966 F 49.364154810201327' 2008-Apr-29 19:10:36 LOG2 antvel: Parameters to Doppler: Heliocentric 83484 2008 120 0.0 2008-Apr-29 19:10:36 INFO5 antvel: Computed antenna velocity: +28.25434 km/s 2008-Apr-29 19:10:36 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=28.2543449743 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-29 19:10:36 INFO4 dopset_gen: New sky frequencies: 1381.113264 1381.113264 1381.113264 1381.113264 1381.113264 1381.113264 1381.113264 1381.113264 1381.113264 2008-Apr-29 19:10:36 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.113264 sky0=1381.113264 sky1=1381.113264 sky2=1381.113264 sky3=1381.113264 sky4=1381.113264 sky5=1381.113264 sky6=1381.113264 sky7=1381.113264 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-29 19:10:36 LOG2 dopset_gen: Result from 'sky2syn': 1631.113264 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-29 19:10:36 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631113264.0} 2008-Apr-29 19:10:36 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 19:10:36 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-29 19:10:36 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-29 19:10:36 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:14.6 Dec = +23:48:32.6 2008-Apr-29 19:10:36 LOG3 track_source: Calling 'track_source AGES3193_p1_004 095214.6 234832.6 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-29 19:10:36 START begin_task: Starting task 'sending tracking commands' 2008-Apr-29 19:10:36 LOG5 begin_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2008-Apr-29 19:10:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p1_004} INFO {Slewing to source 'AGES3193_p1_004' ...} 2008-Apr-29 19:10:36 INFO1 track_source: Starting to track AGES3193_p1_004 2008-Apr-29 19:10:36 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p1_004" 2008-Apr-29 19:10:36 LOG3 vw_send: To DATATAKING: set ra 095214.6 2008-Apr-29 19:10:36 LOG3 vw_send: To DATATAKING: set dec 234832.6 2008-Apr-29 19:10:36 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-29 19:10:36 LOG3 vw_send: To DATATAKING: pnt tr 095214.6 234832.6 -CJ 2008-Apr-29 19:10:36 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-29 19:10:36 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-29 19:10:36 LOG5 finish_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2008-Apr-29 19:10:36 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-29 19:10:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 19:10:36 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-29 19:10:36 LOG5 end_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2008-Apr-29 19:10:36 START begin_task: Starting task 'waiting on telescope' 2008-Apr-29 19:10:36 LOG5 begin_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2008-Apr-29 19:10:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-29 19:10:36 LOG3 waittrk: Start waittrk 5 2008-Apr-29 19:10:36 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-29 19:10:36 LOG5 begin_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2008-Apr-29 19:10:36 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631113264.0} 2008-Apr-29 19:10:36 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 19:10:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 19:10:36 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p1_004" 2008-Apr-29 19:10:36 LOG4 got_cormsg: From DATATAKING: set ra 095214.6 2008-Apr-29 19:10:36 LOG4 got_cormsg: From DATATAKING: set dec 234832.6 2008-Apr-29 19:10:36 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-29 19:10:36 LOG4 got_cormsg: From DATATAKING: 095214.6 2008-Apr-29 19:10:36 LOG4 got_cormsg: From DATATAKING: vw% 234832.6 2008-Apr-29 19:10:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 19:10:36 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-29 19:10:36 LOG4 got_cormsg: From DATATAKING: pnt tr 095214.6 234832.6 -CJ 2008-Apr-29 19:10:36 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-29 19:10:36 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-29 19:10:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 19:10:41 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-29 19:10:41 LOG5 end_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2008-Apr-29 19:10:41 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-29 19:10:41 LOG5 begin_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2008-Apr-29 19:10:43 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-29 19:10:43 LOG5 end_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2008-Apr-29 19:10:43 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-29 19:10:43 INFO2 waittrk: Now tracking AGES3193_p1_004 2008-Apr-29 19:10:43 LOG4 waittrk: Current telescope position: Az = 235.10 ZA = 9.99 2008-Apr-29 19:10:43 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-29 19:10:43 LOG5 finish_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2008-Apr-29 19:10:43 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-29 19:10:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 19:10:43 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-29 19:10:43 LOG5 end_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2008-Apr-29 19:10:43 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-29 19:10:43 LOG5 begin_task: Level: (3) ID = <10148> Status = 0 0 0 0 ok 2008-Apr-29 19:10:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-29 19:10:43 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-29 19:10:43 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-29 19:10:44 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-29 19:10:44 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 19:10:44 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-29 19:10:44 LOG5 begin_task: Level: (4) ID = <10149> Status = 0 0 0 0 ok 2008-Apr-29 19:10:44 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-29 19:10:44 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 19:10:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 19:10:46 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-29 19:10:46 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-29 19:10:46 LOG5 end_task: Level: (4) ID = <10149> Status = 0 0 0 0 ok 2008-Apr-29 19:10:46 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-29 19:10:46 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-29 19:10:46 LOG5 begin_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2008-Apr-29 19:10:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-29 19:10:47 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-29 19:10:47 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-29 19:10:47 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-29 19:10:47 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-29 19:10:47 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-29 19:10:47 LOG5 begin_task: Level: (5) ID = <10151> Status = 0 0 0 0 ok 2008-Apr-29 19:10:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 19:10:47 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-29 19:10:47 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 0 dB --- beam 1: 7 6 dB 2008-Apr-29 19:10:47 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 2 dB --- beam 5: 6 5 dB 2008-Apr-29 19:10:47 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 3 dB --- beam 3: 3 3 dB 2008-Apr-29 19:10:47 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 2 2 dB 2008-Apr-29 19:10:47 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-29 19:10:47 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-29 19:10:47 LOG5 end_task: Level: (5) ID = <10151> Status = 0 0 0 0 ok 2008-Apr-29 19:10:47 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.913 0.935 ALFA beam 1: 1.066 0.996 2008-Apr-29 19:10:47 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.947 1.067 ALFA beam 3: 1.111 0.971 2008-Apr-29 19:10:47 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.053 1.079 ALFA beam 5: 0.958 1.086 2008-Apr-29 19:10:47 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.993 0.970 ALFA beam 7: 1.080 1.076 2008-Apr-29 19:10:47 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-29 19:10:47 LOG5 finish_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2008-Apr-29 19:10:47 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-29 19:10:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 19:10:47 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-29 19:10:47 LOG5 end_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2008-Apr-29 19:10:47 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-29 19:10:47 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-29 19:10:47 LOG5 finish_task: Level: (3) ID = <10148> Status = 0 0 0 0 ok 2008-Apr-29 19:10:47 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-29 19:10:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 19:10:47 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-29 19:10:47 LOG5 end_task: Level: (3) ID = <10148> Status = 0 0 0 0 ok 2008-Apr-29 19:10:47 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Karen O'Neil 2008-Apr-29 19:10:47 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Karen O'Neil 2008-Apr-29 19:10:47 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Karen O'Neil 2008-Apr-29 19:10:47 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Karen O'Neil 2008-Apr-29 19:10:47 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-29 19:10:47 START begin_task: Starting task 'WAPP calibration' 2008-Apr-29 19:10:47 LOG5 begin_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2008-Apr-29 19:10:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-29 19:10:48 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-29 19:10:48 START begin_task: Starting task 'selecting calibration type' 2008-Apr-29 19:10:48 LOG5 begin_task: Level: (4) ID = <10153> Status = 0 0 0 0 ok 2008-Apr-29 19:10:48 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-29 19:10:48 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-29 19:10:48 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 19:10:48 START begin_task: Starting task 'waiting on setcal' 2008-Apr-29 19:10:48 LOG5 begin_task: Level: (5) ID = <10154> Status = 0 0 0 0 ok 2008-Apr-29 19:10:48 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Karen O'Neil' 2008-Apr-29 19:10:48 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-29 19:10:48 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 19:10:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 19:10:48 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-29 19:10:48 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-29 19:10:48 LOG5 end_task: Level: (5) ID = <10154> Status = 0 0 0 0 ok 2008-Apr-29 19:10:48 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-29 19:10:48 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-29 19:10:48 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-29 19:10:48 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-29 19:10:48 LOG5 begin_task: Level: (5) ID = <10155> Status = 0 0 0 0 ok 2008-Apr-29 19:10:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 19:10:48 NOTE WAPPDATA-new_file: New FITS file: wapp.20080429.a2048.0002.fits 2008-Apr-29 19:10:48 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080429.a2048.0002.fits} 2008-Apr-29 19:10:48 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-29 19:10:48 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-29 19:10:48 LOG5 end_task: Level: (5) ID = <10155> Status = 0 0 0 0 ok 2008-Apr-29 19:10:48 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-29 19:10:48 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-29 19:10:48 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-29 19:10:48 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-29 19:10:48 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-29 19:10:48 LOG5 begin_task: Level: (5) ID = <10156> Status = 0 0 0 0 ok 2008-Apr-29 19:10:48 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-29 19:10:48 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-29 19:10:48 LOG5 end_task: Level: (5) ID = <10156> Status = 0 0 0 0 ok 2008-Apr-29 19:10:48 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-29 19:10:48 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-29 19:10:48 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-29 19:10:48 LOG5 finish_task: Level: (4) ID = <10153> Status = 0 0 0 0 ok 2008-Apr-29 19:10:48 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-29 19:10:48 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 19:10:48 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-29 19:10:48 LOG5 end_task: Level: (4) ID = <10153> Status = 0 0 0 0 ok 2008-Apr-29 19:10:48 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-29 19:10:48 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-29 19:10:48 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-29 19:10:48 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-29 19:10:48 LOG5 begin_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2008-Apr-29 19:10:49 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-29 19:10:49 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-29 19:10:49 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-29 19:10:49 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-29 19:10:49 LOG5 end_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2008-Apr-29 19:10:49 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-29 19:10:49 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-29 19:10:49 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-29 19:10:49 LOG5 begin_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2008-Apr-29 19:10:49 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-29 19:10:49 LOG5 log_alfabeam: Parameters: 9.8707222222222235 23.80905555555556 9.281258 2008.3307300935433 -35.700008 2008-Apr-29 19:10:49 LOG4 log_alfabeam: ALFABEAM 0 9.870722222222220 23.809055555555563 2008-Apr-29 19:10:49 LOG4 log_alfabeam: ALFABEAM 1 9.871105342167127 23.715199666115545 2008-Apr-29 19:10:49 LOG4 log_alfabeam: ALFABEAM 2 9.877405690442295 23.777372237744277 2008-Apr-29 19:10:49 LOG4 log_alfabeam: ALFABEAM 3 9.876987704256296 23.871979858187697 2008-Apr-29 19:10:49 LOG4 log_alfabeam: ALFABEAM 4 9.870268017356867 23.903174306303018 2008-Apr-29 19:10:49 LOG4 log_alfabeam: ALFABEAM 5 9.864036198486765 23.839604489982719 2008-Apr-29 19:10:49 LOG4 log_alfabeam: ALFABEAM 6 9.864455048673189 23.746233787510345 2008-Apr-29 19:10:49 INFO2 take_spectra: Starting WAPP scan: 812000115 2008-Apr-29 19:10:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-29 19:10:49 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-29 19:10:49 LOG5 begin_task: Level: (5) ID = <10159> Status = 0 0 0 0 ok 2008-Apr-29 19:10:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-29 19:10:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83450.00 2008-Apr-29 19:10:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.113264 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-29 19:10:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.113264 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 19:10:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.113264 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 19:10:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.113264 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 19:10:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.113264 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 19:10:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.113264 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 19:10:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.113264 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 19:10:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.113264 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 19:10:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.113264 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 19:10:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-29 19:10:55 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-29 19:10:55 LOG5 end_task: Level: (5) ID = <10159> Status = 0 0 0 0 ok 2008-Apr-29 19:10:55 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-29 19:10:55 LOG5 end_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2008-Apr-29 19:10:55 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-29 19:10:55 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-29 19:10:55 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-29 19:10:55 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-29 19:10:55 LOG5 begin_task: Level: (4) ID = <10160> Status = 0 0 0 0 ok 2008-Apr-29 19:10:56 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-29 19:10:56 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-29 19:10:56 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-29 19:10:56 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-29 19:10:56 LOG5 end_task: Level: (4) ID = <10160> Status = 0 0 0 0 ok 2008-Apr-29 19:10:56 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-29 19:10:56 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-29 19:10:56 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-29 19:10:56 LOG5 begin_task: Level: (4) ID = <10161> Status = 0 0 0 0 ok 2008-Apr-29 19:10:56 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-29 19:10:56 LOG5 log_alfabeam: Parameters: 9.8707222222222235 23.80905555555556 9.283207 2008.3307303153597 -35.700008 2008-Apr-29 19:10:56 LOG4 log_alfabeam: ALFABEAM 0 9.870722222222216 23.809055555555563 2008-Apr-29 19:10:56 LOG4 log_alfabeam: ALFABEAM 1 9.871116120246146 23.715208454902157 2008-Apr-29 19:10:56 LOG4 log_alfabeam: ALFABEAM 2 9.877409354124039 23.777516784263412 2008-Apr-29 19:10:56 LOG4 log_alfabeam: ALFABEAM 3 9.876980400108490 23.872116613298967 2008-Apr-29 19:10:56 LOG4 log_alfabeam: ALFABEAM 4 9.870257027638461 23.903164580877956 2008-Apr-29 19:10:56 LOG4 log_alfabeam: ALFABEAM 5 9.864032673775959 23.839457377789348 2008-Apr-29 19:10:56 LOG4 log_alfabeam: ALFABEAM 6 9.864462322206265 23.746097369473993 2008-Apr-29 19:10:56 INFO2 take_spectra: Starting WAPP scan: 812000116 2008-Apr-29 19:10:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-29 19:10:56 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-29 19:10:56 LOG5 begin_task: Level: (5) ID = <10162> Status = 0 0 0 0 ok 2008-Apr-29 19:10:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-29 19:10:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83457.00 2008-Apr-29 19:11:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.570 > 1.4)! 2008-Apr-29 19:11:01 LOG4 check_wapp_levels: WAPP-1 power levels: 1.258 1.254 1.442 1.365 2008-Apr-29 19:11:01 LOG4 check_wapp_levels: WAPP-2 power levels: 1.288 1.521 1.570 1.334 2008-Apr-29 19:11:01 LOG4 check_wapp_levels: WAPP-3 power levels: 1.472 1.504 1.328 1.452 2008-Apr-29 19:11:01 LOG4 check_wapp_levels: WAPP-4 power levels: 1.374 1.346 1.496 1.491 2008-Apr-29 19:11:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.113264 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-29 19:11:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.113264 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 19:11:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.113264 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 19:11:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.113264 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 19:11:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.113264 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 19:11:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.113264 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 19:11:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.113264 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 19:11:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.113264 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 19:11:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.113264 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 19:11:02 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-29 19:11:02 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-29 19:11:02 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-29 19:11:02 LOG5 end_task: Level: (5) ID = <10162> Status = 0 0 0 0 ok 2008-Apr-29 19:11:02 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-29 19:11:02 LOG5 end_task: Level: (4) ID = <10161> Status = 0 0 0 0 ok 2008-Apr-29 19:11:02 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-29 19:11:02 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-29 19:11:02 LOG5 finish_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2008-Apr-29 19:11:02 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-29 19:11:02 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 19:11:02 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-29 19:11:02 LOG5 end_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2008-Apr-29 19:11:02 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-29 19:11:03 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 235.63 and ZA = 9.99 2008-Apr-29 19:11:03 LOG3 track_source: Calling 'track_source AGES3193_p1_004 235.63 9.9899658987 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-29 19:11:03 START begin_task: Starting task 'sending tracking commands' 2008-Apr-29 19:11:03 LOG5 begin_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2008-Apr-29 19:11:03 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p1_004} INFO {Slewing to source 'AGES3193_p1_004' ...} 2008-Apr-29 19:11:03 INFO1 track_source: Starting to track AGES3193_p1_004 2008-Apr-29 19:11:03 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p1_004" 2008-Apr-29 19:11:03 LOG3 vw_send: To DATATAKING: set ra 235.63 2008-Apr-29 19:11:03 LOG3 vw_send: To DATATAKING: set dec 9.9899658987 2008-Apr-29 19:11:03 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-29 19:11:03 LOG3 vw_send: To DATATAKING: pnt tr 235.63 9.9899658987 -CF 2008-Apr-29 19:11:03 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-29 19:11:03 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-29 19:11:03 LOG5 finish_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2008-Apr-29 19:11:03 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-29 19:11:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 19:11:03 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-29 19:11:03 LOG5 end_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2008-Apr-29 19:11:03 LOG1 fixed_driftmap: Parameters: HA = -00:36:00.4 Start = 09:17:29.0 LST = 09:17:06.6 diff = 22.4 secs 2008-Apr-29 19:11:03 INFO2 fixed_driftmap: Waiting 20.4 seconds for RA 9:53:29 2008-Apr-29 19:11:03 INFO2 lstwait: Waiting for 20.4 secs from LST 09:17:07 to LST 09:17:27 ... 2008-Apr-29 19:11:03 LOG4 send_obs_status: To obs_status: <1> TASKTIME 20.371532999002717 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-29 19:11:03 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-29 19:11:03 LOG5 begin_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2008-Apr-29 19:11:03 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p1_004" 2008-Apr-29 19:11:03 LOG4 got_cormsg: From DATATAKING: set ra 235.63 2008-Apr-29 19:11:03 LOG4 got_cormsg: From DATATAKING: set dec 9.9899658987 2008-Apr-29 19:11:03 LOG4 got_cormsg: From DATATAKING: vw% 235.63 2008-Apr-29 19:11:03 LOG4 got_cormsg: From DATATAKING: vw% 9.9899658987 2008-Apr-29 19:11:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 19:11:03 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-29 19:11:03 LOG4 got_cormsg: From DATATAKING: pnt tr 235.63 9.9899658987 -CF 2008-Apr-29 19:11:03 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-29 19:11:03 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-29 19:11:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 19:11:07 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.914 and 1.135 2008-Apr-29 19:11:23 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-29 19:11:23 LOG5 end_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2008-Apr-29 19:11:23 LOG4 lstwait: Finished waiting, the gui caused difference: 0.62909227999696782 2008-Apr-29 19:11:23 INFO3 lstwait: Finished waiting 2008-Apr-29 19:11:23 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-29 19:11:23 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-29 19:11:23 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-29 19:11:23 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-29 19:11:23 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-29 19:11:23 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-29 19:11:23 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-29 19:11:23 LOG5 begin_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2008-Apr-29 19:11:23 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-29 19:11:23 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-29 19:11:23 INFO2 take_spectra: Starting WAPP scan: 812000117 2008-Apr-29 19:11:24 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-29 19:11:24 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-29 19:11:24 LOG5 begin_task: Level: (4) ID = <10166> Status = 0 0 0 0 ok 2008-Apr-29 19:11:24 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-29 19:11:24 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83485.00 2008-Apr-29 19:11:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.113264 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-29 19:11:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.113264 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 19:11:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.113264 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 19:11:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.113264 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 19:11:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.113264 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 19:11:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.113264 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 19:11:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.113264 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 19:11:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.113264 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 19:11:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.113264 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 19:16:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.695 < 0.8)! 2008-Apr-29 19:16:38 LOG4 check_wapp_levels: WAPP-1 power levels: 0.918 0.695 1.069 0.988 2008-Apr-29 19:16:38 LOG4 check_wapp_levels: WAPP-2 power levels: 0.944 1.095 1.140 0.974 2008-Apr-29 19:16:38 LOG4 check_wapp_levels: WAPP-3 power levels: 1.049 1.078 0.959 1.089 2008-Apr-29 19:16:38 LOG4 check_wapp_levels: WAPP-4 power levels: 0.995 0.973 1.083 1.079 2008-Apr-29 19:16:40 INFO5 check_wapp_levels: WAPP power levels are between 0.600 and 1.142 (still bad) 2008-Apr-29 19:16:42 INFO5 check_wapp_levels: WAPP power levels are between 0.604 and 1.141 (still bad) 2008-Apr-29 19:16:44 INFO5 check_wapp_levels: WAPP power levels are between 0.598 and 1.142 (still bad) 2008-Apr-29 19:16:46 INFO5 check_wapp_levels: WAPP power levels are between 0.599 and 1.140 (still bad) 2008-Apr-29 19:16:48 INFO5 check_wapp_levels: WAPP power levels are between 0.602 and 1.140 (still bad) 2008-Apr-29 19:16:50 INFO5 check_wapp_levels: WAPP power levels are between 0.603 and 1.141 (still bad) 2008-Apr-29 19:16:52 INFO5 check_wapp_levels: WAPP power levels are between 0.606 and 1.140 (still bad) 2008-Apr-29 19:16:54 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.923 and 1.139 2008-Apr-29 19:31:25 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-29 19:31:25 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-29 19:31:25 LOG5 end_task: Level: (4) ID = <10166> Status = 0 0 0 0 ok 2008-Apr-29 19:31:25 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-29 19:31:25 LOG5 end_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2008-Apr-29 19:31:25 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-29 19:31:25 LOG5 finish_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2008-Apr-29 19:31:25 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-29 19:31:25 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-29 19:31:25 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-29 19:31:25 LOG5 end_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2008-Apr-29 19:31:25 COMMAND run_command_line: EXECUTING command 15: 'FIXEDDRIFT az=208.91 alfaangle=-7.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p1_006 ra=95300.00 dec=234530.00' 2008-Apr-29 19:31:25 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-29 19:31:26 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-29 19:31:26 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 208.91 -7.3 hcorcal 5 tracking no first 1 AGES3193_p1_006 95300.00 234530.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-29 19:31:26 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-29 19:31:26 LOG5 begin_task: Level: (2) ID = <10167> Status = 0 0 0 0 ok 2008-Apr-29 19:31:26 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES3193_p1_004' 2008-Apr-29 19:31:26 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-29 19:31:26 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p1_006} 2008-Apr-29 19:31:26 INFO3 fixed_driftmap: Sending telescope to Az = 208.91 and ZA = 6.16 2008-Apr-29 19:31:26 LOG3 track_source: Calling 'track_source AGES3193_p1_006 208.91 6.1630162369 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-29 19:31:26 START begin_task: Starting task 'sending tracking commands' 2008-Apr-29 19:31:26 LOG5 begin_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2008-Apr-29 19:31:26 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p1_006} INFO {Slewing to source 'AGES3193_p1_006' ...} 2008-Apr-29 19:31:26 INFO1 track_source: Starting to track AGES3193_p1_006 2008-Apr-29 19:31:26 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p1_006" 2008-Apr-29 19:31:26 LOG3 vw_send: To DATATAKING: set ra 208.91 2008-Apr-29 19:31:26 LOG3 vw_send: To DATATAKING: set dec 6.1630162369 2008-Apr-29 19:31:26 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-29 19:31:26 LOG3 vw_send: To DATATAKING: pnt tr 208.91 6.1630162369 -CF 2008-Apr-29 19:31:26 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-29 19:31:26 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-29 19:31:26 LOG5 finish_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2008-Apr-29 19:31:26 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-29 19:31:26 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 19:31:26 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-29 19:31:26 LOG5 end_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2008-Apr-29 19:31:26 START begin_task: Starting task 'rotate ALFA to -7.3 degrees' 2008-Apr-29 19:31:26 LOG5 begin_task: Level: (3) ID = <10169> Status = 0 0 0 0 ok 2008-Apr-29 19:31:26 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -7.3 degrees ...} 2008-Apr-29 19:31:26 INFO2 rotate_alfa: ALFA commanded to -7.3 degrees 2008-Apr-29 19:31:26 LOG3 sock_errsend: To ALFAMOTOR: POSITION -7.3 REPLY 2008-Apr-29 19:31:26 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-29 19:31:26 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-29 19:31:26 LOG5 begin_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2008-Apr-29 19:31:26 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p1_006" 2008-Apr-29 19:31:26 LOG4 got_cormsg: From DATATAKING: set ra 208.91 2008-Apr-29 19:31:26 LOG4 got_cormsg: From DATATAKING: set dec 6.1630162369 2008-Apr-29 19:31:26 LOG4 got_cormsg: From DATATAKING: vw% 208.91 2008-Apr-29 19:31:26 LOG4 got_cormsg: From DATATAKING: vw% 6.1630162369 2008-Apr-29 19:31:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 19:31:26 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-29 19:31:26 LOG4 got_cormsg: From DATATAKING: pnt tr 208.91 6.1630162369 -CF 2008-Apr-29 19:31:26 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-29 19:31:26 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-29 19:31:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 19:31:43 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-29 19:31:43 INFO3 alfa_motor: ALFA rotator in-position -7.30 degrees 2008-Apr-29 19:31:43 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-29 19:31:43 LOG5 end_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2008-Apr-29 19:31:43 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-29 19:31:43 STOP finish_task: Finishing task 'rotate ALFA to -7.3 degrees' 2008-Apr-29 19:31:43 LOG5 finish_task: Level: (3) ID = <10169> Status = 0 0 0 0 ok 2008-Apr-29 19:31:43 INFO2 finish_task: DONE finished configuration: rotating ALFA to -7.3 degrees 2008-Apr-29 19:31:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 19:31:43 STOP end_task: Finishing task 'rotate ALFA to -7.3 degrees' with status 'OK' 2008-Apr-29 19:31:43 LOG5 end_task: Level: (3) ID = <10169> Status = 0 0 0 0 ok 2008-Apr-29 19:31:43 START begin_task: Starting task 'waiting on telescope' 2008-Apr-29 19:31:43 LOG5 begin_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2008-Apr-29 19:31:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-29 19:31:43 LOG3 waittrk: Start waittrk 5 2008-Apr-29 19:31:43 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-29 19:31:43 LOG5 begin_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2008-Apr-29 19:31:48 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-29 19:31:48 LOG5 end_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2008-Apr-29 19:31:48 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-29 19:31:48 LOG5 begin_task: Level: (4) ID = <10173> Status = 0 0 0 0 ok 2008-Apr-29 19:33:08 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-29 19:33:08 LOG5 end_task: Level: (4) ID = <10173> Status = 0 0 0 0 ok 2008-Apr-29 19:33:08 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-29 19:33:08 INFO2 waittrk: Now tracking AGES3193_p1_006 2008-Apr-29 19:33:08 LOG4 waittrk: Current telescope position: Az = 208.53 ZA = 6.18 2008-Apr-29 19:33:08 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-29 19:33:08 LOG5 finish_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2008-Apr-29 19:33:08 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-29 19:33:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 19:33:08 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-29 19:33:08 LOG5 end_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2008-Apr-29 19:33:08 START begin_task: Starting task 'selecting calibration type' 2008-Apr-29 19:33:08 LOG5 begin_task: Level: (3) ID = <10174> Status = 0 0 0 0 ok 2008-Apr-29 19:33:08 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-29 19:33:08 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-29 19:33:08 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 19:33:08 START begin_task: Starting task 'waiting on setcal' 2008-Apr-29 19:33:08 LOG5 begin_task: Level: (4) ID = <10175> Status = 0 0 0 0 ok 2008-Apr-29 19:33:08 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-29 19:33:08 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 19:33:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 19:33:10 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-29 19:33:10 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-29 19:33:10 LOG5 end_task: Level: (4) ID = <10175> Status = 0 0 0 0 ok 2008-Apr-29 19:33:10 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-29 19:33:10 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-29 19:33:10 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-29 19:33:10 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-29 19:33:10 LOG5 begin_task: Level: (4) ID = <10176> Status = 0 0 0 0 ok 2008-Apr-29 19:33:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 19:33:10 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-29 19:33:10 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-29 19:33:10 LOG5 end_task: Level: (4) ID = <10176> Status = 0 0 0 0 ok 2008-Apr-29 19:33:10 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-29 19:33:10 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-29 19:33:10 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-29 19:33:10 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-29 19:33:10 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-29 19:33:10 LOG5 begin_task: Level: (4) ID = <10177> Status = 0 0 0 0 ok 2008-Apr-29 19:33:10 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-29 19:33:10 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-29 19:33:10 LOG5 end_task: Level: (4) ID = <10177> Status = 0 0 0 0 ok 2008-Apr-29 19:33:10 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-29 19:33:10 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-29 19:33:10 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-29 19:33:10 LOG5 finish_task: Level: (3) ID = <10174> Status = 0 0 0 0 ok 2008-Apr-29 19:33:10 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-29 19:33:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 19:33:10 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-29 19:33:10 LOG5 end_task: Level: (3) ID = <10174> Status = 0 0 0 0 ok 2008-Apr-29 19:33:10 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2008-Apr-29 19:33:10 INFO2 astwait: Waiting for 11 seconds from 23:33:10 to 23:33:21 UTC ... 2008-Apr-29 19:33:10 LOG4 send_obs_status: To obs_status: <1> TASKTIME 11 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-29 19:33:10 START begin_task: Starting task 'waiting on waiting for AST time' 2008-Apr-29 19:33:10 LOG5 begin_task: Level: (3) ID = <10178> Status = 0 0 0 0 ok 2008-Apr-29 19:33:21 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2008-Apr-29 19:33:21 LOG5 end_task: Level: (3) ID = <10178> Status = 0 0 0 0 ok 2008-Apr-29 19:33:21 INFO3 astwait: Finished waiting 2008-Apr-29 19:33:21 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-29 19:33:21 LOG5 dopset_later: Calling 'dopset_later 61.001177849983904' 2008-Apr-29 19:33:21 INFO3 dopset_later: Setting Doppler correction for 19:34:21 (61 seconds from now) 2008-Apr-29 19:33:21 LOG5 antvel: Calling 'antvel 208.910000 6.163016 F 61.001177849983904' 2008-Apr-29 19:33:21 LOG2 antvel: Parameters to Doppler: Heliocentric 84861 2008 120 0.0 2008-Apr-29 19:33:21 INFO5 antvel: Computed antenna velocity: +28.29861 km/s 2008-Apr-29 19:33:21 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=28.298606291399999 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-29 19:33:21 INFO4 dopset_gen: New sky frequencies: 1381.113060 1381.113060 1381.113060 1381.113060 1381.113060 1381.113060 1381.113060 1381.113060 1381.113060 2008-Apr-29 19:33:21 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.113060 sky0=1381.113060 sky1=1381.113060 sky2=1381.113060 sky3=1381.113060 sky4=1381.113060 sky5=1381.113060 sky6=1381.113060 sky7=1381.113060 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-29 19:33:21 LOG2 dopset_gen: Result from 'sky2syn': 1631.113060 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-29 19:33:21 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631113060.0} 2008-Apr-29 19:33:21 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 19:33:21 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-29 19:33:21 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-29 19:33:21 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:03.0 Dec = +23:45:32.5 2008-Apr-29 19:33:21 LOG3 track_source: Calling 'track_source AGES3193_p1_006 095203.0 234532.5 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-29 19:33:21 START begin_task: Starting task 'sending tracking commands' 2008-Apr-29 19:33:21 LOG5 begin_task: Level: (3) ID = <10179> Status = 0 0 0 0 ok 2008-Apr-29 19:33:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p1_006} INFO {Slewing to source 'AGES3193_p1_006' ...} 2008-Apr-29 19:33:21 INFO1 track_source: Starting to track AGES3193_p1_006 2008-Apr-29 19:33:21 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p1_006" 2008-Apr-29 19:33:21 LOG3 vw_send: To DATATAKING: set ra 095203.0 2008-Apr-29 19:33:21 LOG3 vw_send: To DATATAKING: set dec 234532.5 2008-Apr-29 19:33:21 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-29 19:33:21 LOG3 vw_send: To DATATAKING: pnt tr 095203.0 234532.5 -CJ 2008-Apr-29 19:33:21 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-29 19:33:21 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-29 19:33:21 LOG5 finish_task: Level: (3) ID = <10179> Status = 0 0 0 0 ok 2008-Apr-29 19:33:21 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-29 19:33:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 19:33:21 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-29 19:33:21 LOG5 end_task: Level: (3) ID = <10179> Status = 0 0 0 0 ok 2008-Apr-29 19:33:21 START begin_task: Starting task 'waiting on telescope' 2008-Apr-29 19:33:21 LOG5 begin_task: Level: (3) ID = <10180> Status = 0 0 0 0 ok 2008-Apr-29 19:33:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-29 19:33:21 LOG3 waittrk: Start waittrk 5 2008-Apr-29 19:33:21 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-29 19:33:21 LOG5 begin_task: Level: (4) ID = <10181> Status = 0 0 0 0 ok 2008-Apr-29 19:33:21 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631113060.0} 2008-Apr-29 19:33:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 19:33:21 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-29 19:33:21 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p1_006" 2008-Apr-29 19:33:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 19:33:21 LOG4 got_cormsg: From DATATAKING: set ra 095203.0 2008-Apr-29 19:33:21 LOG4 got_cormsg: From DATATAKING: set dec 234532.5 2008-Apr-29 19:33:21 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-29 19:33:21 LOG4 got_cormsg: From DATATAKING: pnt tr 095203.0 234532.5 -CJ 2008-Apr-29 19:33:21 LOG4 got_cormsg: From DATATAKING: 095203.0 2008-Apr-29 19:33:21 LOG4 got_cormsg: From DATATAKING: vw% 234532.5 2008-Apr-29 19:33:21 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2008-Apr-29 19:33:21 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-29 19:33:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 19:33:26 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-29 19:33:26 LOG5 end_task: Level: (4) ID = <10181> Status = 0 0 0 0 ok 2008-Apr-29 19:33:26 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-29 19:33:26 LOG5 begin_task: Level: (4) ID = <10182> Status = 0 0 0 0 ok 2008-Apr-29 19:33:28 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-29 19:33:28 LOG5 end_task: Level: (4) ID = <10182> Status = 0 0 0 0 ok 2008-Apr-29 19:33:28 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-29 19:33:28 INFO2 waittrk: Now tracking AGES3193_p1_006 2008-Apr-29 19:33:28 LOG4 waittrk: Current telescope position: Az = 208.39 ZA = 6.17 2008-Apr-29 19:33:28 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-29 19:33:28 LOG5 finish_task: Level: (3) ID = <10180> Status = 0 0 0 0 ok 2008-Apr-29 19:33:28 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-29 19:33:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 19:33:28 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-29 19:33:28 LOG5 end_task: Level: (3) ID = <10180> Status = 0 0 0 0 ok 2008-Apr-29 19:33:28 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-29 19:33:28 LOG5 begin_task: Level: (3) ID = <10183> Status = 0 0 0 0 ok 2008-Apr-29 19:33:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-29 19:33:28 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-29 19:33:28 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-29 19:33:28 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-29 19:33:28 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 19:33:28 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-29 19:33:28 LOG5 begin_task: Level: (4) ID = <10184> Status = 0 0 0 0 ok 2008-Apr-29 19:33:28 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-29 19:33:28 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 19:33:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 19:33:31 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-29 19:33:31 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-29 19:33:31 LOG5 end_task: Level: (4) ID = <10184> Status = 0 0 0 0 ok 2008-Apr-29 19:33:31 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-29 19:33:31 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-29 19:33:31 LOG5 begin_task: Level: (4) ID = <10185> Status = 0 0 0 0 ok 2008-Apr-29 19:33:31 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-29 19:33:31 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-29 19:33:31 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-29 19:33:31 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-29 19:33:31 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-29 19:33:31 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-29 19:33:31 LOG5 begin_task: Level: (5) ID = <10186> Status = 0 0 0 0 ok 2008-Apr-29 19:33:32 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-29 19:33:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 19:33:32 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 0 dB --- beam 1: 7 6 dB 2008-Apr-29 19:33:32 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 2 2 dB 2008-Apr-29 19:33:32 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 2 dB --- beam 5: 6 5 dB 2008-Apr-29 19:33:32 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 3 dB --- beam 3: 3 3 dB 2008-Apr-29 19:33:32 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-29 19:33:32 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-29 19:33:32 LOG5 end_task: Level: (5) ID = <10186> Status = 0 0 0 0 ok 2008-Apr-29 19:33:32 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.105 1.001 ALFA beam 1: 1.038 0.985 2008-Apr-29 19:33:32 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.916 1.087 ALFA beam 3: 1.111 0.969 2008-Apr-29 19:33:32 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.052 1.078 ALFA beam 5: 0.920 1.057 2008-Apr-29 19:33:32 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.936 0.938 ALFA beam 7: 1.019 1.042 2008-Apr-29 19:33:32 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-29 19:33:32 LOG5 finish_task: Level: (4) ID = <10185> Status = 0 0 0 0 ok 2008-Apr-29 19:33:32 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-29 19:33:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 19:33:32 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-29 19:33:32 LOG5 end_task: Level: (4) ID = <10185> Status = 0 0 0 0 ok 2008-Apr-29 19:33:32 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-29 19:33:32 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-29 19:33:32 LOG5 finish_task: Level: (3) ID = <10183> Status = 0 0 0 0 ok 2008-Apr-29 19:33:32 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-29 19:33:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 19:33:32 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-29 19:33:32 LOG5 end_task: Level: (3) ID = <10183> Status = 0 0 0 0 ok 2008-Apr-29 19:33:32 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Karen O'Neil 2008-Apr-29 19:33:32 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Karen O'Neil 2008-Apr-29 19:33:32 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Karen O'Neil 2008-Apr-29 19:33:32 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Karen O'Neil 2008-Apr-29 19:33:32 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-29 19:33:32 START begin_task: Starting task 'WAPP calibration' 2008-Apr-29 19:33:32 LOG5 begin_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2008-Apr-29 19:33:32 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-29 19:33:32 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-29 19:33:32 START begin_task: Starting task 'selecting calibration type' 2008-Apr-29 19:33:32 LOG5 begin_task: Level: (4) ID = <10188> Status = 0 0 0 0 ok 2008-Apr-29 19:33:32 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-29 19:33:32 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-29 19:33:32 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 19:33:32 START begin_task: Starting task 'waiting on setcal' 2008-Apr-29 19:33:32 LOG5 begin_task: Level: (5) ID = <10189> Status = 0 0 0 0 ok 2008-Apr-29 19:33:32 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Karen O'Neil' 2008-Apr-29 19:33:33 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-29 19:33:33 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 19:33:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 19:33:33 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-29 19:33:33 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-29 19:33:33 LOG5 end_task: Level: (5) ID = <10189> Status = 0 0 0 0 ok 2008-Apr-29 19:33:33 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-29 19:33:33 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-29 19:33:33 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-29 19:33:33 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-29 19:33:33 LOG5 begin_task: Level: (5) ID = <10190> Status = 0 0 0 0 ok 2008-Apr-29 19:33:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 19:33:33 NOTE WAPPDATA-new_file: New FITS file: wapp.20080429.a2048.0003.fits 2008-Apr-29 19:33:33 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080429.a2048.0003.fits} 2008-Apr-29 19:33:33 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-29 19:33:33 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-29 19:33:33 LOG5 end_task: Level: (5) ID = <10190> Status = 0 0 0 0 ok 2008-Apr-29 19:33:33 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-29 19:33:33 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-29 19:33:33 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-29 19:33:33 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-29 19:33:33 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-29 19:33:33 LOG5 begin_task: Level: (5) ID = <10191> Status = 0 0 0 0 ok 2008-Apr-29 19:33:33 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-29 19:33:33 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-29 19:33:33 LOG5 end_task: Level: (5) ID = <10191> Status = 0 0 0 0 ok 2008-Apr-29 19:33:33 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-29 19:33:33 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-29 19:33:33 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-29 19:33:33 LOG5 finish_task: Level: (4) ID = <10188> Status = 0 0 0 0 ok 2008-Apr-29 19:33:33 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-29 19:33:33 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 19:33:33 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-29 19:33:33 LOG5 end_task: Level: (4) ID = <10188> Status = 0 0 0 0 ok 2008-Apr-29 19:33:33 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-29 19:33:33 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-29 19:33:33 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-29 19:33:33 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-29 19:33:33 LOG5 begin_task: Level: (4) ID = <10192> Status = 0 0 0 0 ok 2008-Apr-29 19:33:33 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-29 19:33:33 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-29 19:33:33 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-29 19:33:33 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-29 19:33:33 LOG5 end_task: Level: (4) ID = <10192> Status = 0 0 0 0 ok 2008-Apr-29 19:33:33 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-29 19:33:33 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-29 19:33:33 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-29 19:33:33 LOG5 begin_task: Level: (4) ID = <10193> Status = 0 0 0 0 ok 2008-Apr-29 19:33:33 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-29 19:33:34 LOG5 log_alfabeam: Parameters: 9.8674999999999997 23.759027777777778 9.661462 2008.330773347783 -7.300069 2008-Apr-29 19:33:34 LOG4 log_alfabeam: ALFABEAM 0 9.867499999999994 23.759027777777778 2008-Apr-29 19:33:34 LOG4 log_alfabeam: ALFABEAM 1 9.867881452970872 23.658041423279279 2008-Apr-29 19:33:34 LOG4 log_alfabeam: ALFABEAM 2 9.873711094771654 23.725134250832671 2008-Apr-29 19:33:34 LOG4 log_alfabeam: ALFABEAM 3 9.873320484922534 23.826598288357498 2008-Apr-29 19:33:34 LOG4 log_alfabeam: ALFABEAM 4 9.867003493846646 23.860337611642059 2008-Apr-29 19:33:34 LOG4 log_alfabeam: ALFABEAM 5 9.861262797459085 23.791510260097986 2008-Apr-29 19:33:34 LOG4 log_alfabeam: ALFABEAM 6 9.861749467798987 23.690675452824781 2008-Apr-29 19:33:34 INFO2 take_spectra: Starting WAPP scan: 812000118 2008-Apr-29 19:33:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-29 19:33:34 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-29 19:33:34 LOG5 begin_task: Level: (5) ID = <10194> Status = 0 0 0 0 ok 2008-Apr-29 19:33:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-29 19:33:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84815.00 2008-Apr-29 19:33:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.113060 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-29 19:33:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.113060 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 19:33:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.113060 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 19:33:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.113060 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 19:33:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.560 > 1.4)! 2008-Apr-29 19:33:40 LOG4 check_wapp_levels: WAPP-1 power levels: 1.560 1.303 1.417 1.351 2008-Apr-29 19:33:40 LOG4 check_wapp_levels: WAPP-2 power levels: 1.258 1.507 1.546 1.333 2008-Apr-29 19:33:40 LOG4 check_wapp_levels: WAPP-3 power levels: 1.472 1.505 1.286 1.425 2008-Apr-29 19:33:40 LOG4 check_wapp_levels: WAPP-4 power levels: 1.316 1.320 1.435 1.463 2008-Apr-29 19:33:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.113060 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 19:33:40 LOG3 WAPP=1+3+4-save_rfcalc: Channel 5: Sky freq = 1381.113060 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 19:33:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.113060 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 19:33:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.113060 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 19:33:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.113060 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 19:33:40 LOG3 WAPP=2-save_rfcalc: Channel 5: Sky freq = 1381.113060 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 19:33:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-29 19:33:40 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-29 19:33:40 LOG5 end_task: Level: (5) ID = <10194> Status = 0 0 0 0 ok 2008-Apr-29 19:33:40 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-29 19:33:40 LOG5 end_task: Level: (4) ID = <10193> Status = 0 0 0 0 ok 2008-Apr-29 19:33:40 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-29 19:33:40 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-29 19:33:40 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-29 19:33:40 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-29 19:33:40 LOG5 begin_task: Level: (4) ID = <10195> Status = 0 0 0 0 ok 2008-Apr-29 19:33:41 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-29 19:33:41 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-29 19:33:41 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-29 19:33:41 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-29 19:33:41 LOG5 end_task: Level: (4) ID = <10195> Status = 0 0 0 0 ok 2008-Apr-29 19:33:41 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-29 19:33:41 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-29 19:33:41 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-29 19:33:41 LOG5 begin_task: Level: (4) ID = <10196> Status = 0 0 0 0 ok 2008-Apr-29 19:33:41 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-29 19:33:41 LOG5 log_alfabeam: Parameters: 9.8674999999999997 23.759027777777778 9.663412 2008.3307735695996 -7.300069 2008-Apr-29 19:33:41 LOG4 log_alfabeam: ALFABEAM 0 9.867499999999987 23.759027777777778 2008-Apr-29 19:33:41 LOG4 log_alfabeam: ALFABEAM 1 9.867910602832335 23.658063443376545 2008-Apr-29 19:33:41 LOG4 log_alfabeam: ALFABEAM 2 9.873720859044466 23.725472692977316 2008-Apr-29 19:33:41 LOG4 log_alfabeam: ALFABEAM 3 9.873300900533641 23.826915238989677 2008-Apr-29 19:33:41 LOG4 log_alfabeam: ALFABEAM 4 9.866973956366662 23.860309987274999 2008-Apr-29 19:33:41 LOG4 log_alfabeam: ALFABEAM 5 9.861253405159221 23.791167449702208 2008-Apr-29 19:33:41 LOG4 log_alfabeam: ALFABEAM 6 9.861769411377070 23.690360744760319 2008-Apr-29 19:33:41 INFO2 take_spectra: Starting WAPP scan: 812000119 2008-Apr-29 19:33:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-29 19:33:41 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-29 19:33:41 LOG5 begin_task: Level: (5) ID = <10197> Status = 0 0 0 0 ok 2008-Apr-29 19:33:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-29 19:33:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84822.00 2008-Apr-29 19:33:46 INFO5 check_wapp_levels: WAPP power levels are between 1.258 and 1.560 (still bad) 2008-Apr-29 19:33:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.113060 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-29 19:33:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.113060 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 19:33:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.113060 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 19:33:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.113060 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 19:33:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.113060 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 19:33:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.113060 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 19:33:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.113060 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 19:33:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.113060 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 19:33:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.113060 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 19:33:47 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-29 19:33:47 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-29 19:33:47 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-29 19:33:47 LOG5 end_task: Level: (5) ID = <10197> Status = 0 0 0 0 ok 2008-Apr-29 19:33:47 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-29 19:33:47 LOG5 end_task: Level: (4) ID = <10196> Status = 0 0 0 0 ok 2008-Apr-29 19:33:47 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-29 19:33:47 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-29 19:33:47 LOG5 finish_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2008-Apr-29 19:33:47 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-29 19:33:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 19:33:47 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-29 19:33:47 LOG5 end_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2008-Apr-29 19:33:48 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-29 19:33:48 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 208.91 and ZA = 6.16 2008-Apr-29 19:33:48 LOG3 track_source: Calling 'track_source AGES3193_p1_006 208.91 6.1630162369 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-29 19:33:48 START begin_task: Starting task 'sending tracking commands' 2008-Apr-29 19:33:48 LOG5 begin_task: Level: (3) ID = <10198> Status = 0 0 0 0 ok 2008-Apr-29 19:33:48 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p1_006} INFO {Slewing to source 'AGES3193_p1_006' ...} 2008-Apr-29 19:33:48 INFO1 track_source: Starting to track AGES3193_p1_006 2008-Apr-29 19:33:48 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p1_006" 2008-Apr-29 19:33:48 LOG3 vw_send: To DATATAKING: set ra 208.91 2008-Apr-29 19:33:48 LOG3 vw_send: To DATATAKING: set dec 6.1630162369 2008-Apr-29 19:33:48 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-29 19:33:48 LOG3 vw_send: To DATATAKING: pnt tr 208.91 6.1630162369 -CF 2008-Apr-29 19:33:48 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-29 19:33:48 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-29 19:33:48 LOG5 finish_task: Level: (3) ID = <10198> Status = 0 0 0 0 ok 2008-Apr-29 19:33:48 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-29 19:33:48 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 19:33:48 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-29 19:33:48 LOG5 end_task: Level: (3) ID = <10198> Status = 0 0 0 0 ok 2008-Apr-29 19:33:48 LOG1 fixed_driftmap: Parameters: HA = -00:13:00.0 Start = 09:40:29.4 LST = 09:39:55.3 diff = 34.1 secs 2008-Apr-29 19:33:48 INFO2 fixed_driftmap: Waiting 32.1 seconds for RA 9:53:29 2008-Apr-29 19:33:48 INFO2 lstwait: Waiting for 32 secs from LST 09:39:55 to LST 09:40:27 ... 2008-Apr-29 19:33:48 LOG4 send_obs_status: To obs_status: <1> TASKTIME 32.004965868221603 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-29 19:33:48 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-29 19:33:48 LOG5 begin_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2008-Apr-29 19:33:48 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p1_006" 2008-Apr-29 19:33:48 LOG4 got_cormsg: From DATATAKING: set ra 208.91 2008-Apr-29 19:33:48 LOG4 got_cormsg: From DATATAKING: set dec 6.1630162369 2008-Apr-29 19:33:48 LOG4 got_cormsg: From DATATAKING: vw% 208.91 2008-Apr-29 19:33:48 LOG4 got_cormsg: From DATATAKING: vw% 6.1630162369 2008-Apr-29 19:33:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 19:33:48 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-29 19:33:48 LOG4 got_cormsg: From DATATAKING: pnt tr 208.91 6.1630162369 -CF 2008-Apr-29 19:33:48 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-29 19:33:48 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-29 19:33:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 19:33:52 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.915 and 1.125 2008-Apr-29 19:34:20 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-29 19:34:20 LOG5 end_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2008-Apr-29 19:34:20 LOG4 lstwait: Finished waiting, the gui caused difference: 0.99860852000333011 2008-Apr-29 19:34:20 INFO3 lstwait: Finished waiting 2008-Apr-29 19:34:20 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-29 19:34:20 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-29 19:34:20 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-29 19:34:20 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-29 19:34:20 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-29 19:34:20 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-29 19:34:20 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-29 19:34:20 LOG5 begin_task: Level: (3) ID = <10200> Status = 0 0 0 0 ok 2008-Apr-29 19:34:20 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-29 19:34:20 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-29 19:34:20 INFO2 take_spectra: Starting WAPP scan: 812000120 2008-Apr-29 19:34:21 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-29 19:34:21 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-29 19:34:21 LOG5 begin_task: Level: (4) ID = <10201> Status = 0 0 0 0 ok 2008-Apr-29 19:34:21 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-29 19:34:21 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84862.00 2008-Apr-29 19:34:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.113060 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-29 19:34:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.113060 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 19:34:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.113060 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 19:34:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.113060 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 19:34:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.113060 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 19:34:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.113060 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 19:34:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.113060 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 19:34:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.113060 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 19:34:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.113060 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 19:54:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-29 19:54:22 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-29 19:54:22 LOG5 end_task: Level: (4) ID = <10201> Status = 0 0 0 0 ok 2008-Apr-29 19:54:22 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-29 19:54:22 LOG5 end_task: Level: (3) ID = <10200> Status = 0 0 0 0 ok 2008-Apr-29 19:54:22 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-29 19:54:22 LOG5 finish_task: Level: (2) ID = <10167> Status = 0 0 0 0 ok 2008-Apr-29 19:54:22 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-29 19:54:22 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-29 19:54:22 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-29 19:54:22 LOG5 end_task: Level: (2) ID = <10167> Status = 0 0 0 0 ok 2008-Apr-29 19:54:22 COMMAND run_command_line: EXECUTING command 19: 'FIXEDDRIFT az=150.85 alfaangle=45.7 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p1_008 ra=95300.00 dec=234230.00' 2008-Apr-29 19:54:23 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-29 19:54:23 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-29 19:54:23 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 150.85 45.7 hcorcal 5 tracking no first 1 AGES3193_p1_008 95300.00 234230.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-29 19:54:23 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-29 19:54:23 LOG5 begin_task: Level: (2) ID = <10202> Status = 0 0 0 0 ok 2008-Apr-29 19:54:23 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES3193_p1_006' 2008-Apr-29 19:54:23 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-29 19:54:23 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p1_008} 2008-Apr-29 19:54:23 INFO3 fixed_driftmap: Sending telescope to Az = 150.85 and ZA = 6.12 2008-Apr-29 19:54:23 LOG3 track_source: Calling 'track_source AGES3193_p1_008 150.85 6.1201033103 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-29 19:54:23 START begin_task: Starting task 'sending tracking commands' 2008-Apr-29 19:54:23 LOG5 begin_task: Level: (3) ID = <10203> Status = 0 0 0 0 ok 2008-Apr-29 19:54:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p1_008} INFO {Slewing to source 'AGES3193_p1_008' ...} 2008-Apr-29 19:54:23 INFO1 track_source: Starting to track AGES3193_p1_008 2008-Apr-29 19:54:23 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p1_008" 2008-Apr-29 19:54:23 LOG3 vw_send: To DATATAKING: set ra 150.85 2008-Apr-29 19:54:23 LOG3 vw_send: To DATATAKING: set dec 6.1201033103 2008-Apr-29 19:54:23 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-29 19:54:23 LOG3 vw_send: To DATATAKING: pnt tr 150.85 6.1201033103 -CF 2008-Apr-29 19:54:23 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-29 19:54:23 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-29 19:54:23 LOG5 finish_task: Level: (3) ID = <10203> Status = 0 0 0 0 ok 2008-Apr-29 19:54:23 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-29 19:54:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 19:54:23 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-29 19:54:23 LOG5 end_task: Level: (3) ID = <10203> Status = 0 0 0 0 ok 2008-Apr-29 19:54:23 START begin_task: Starting task 'rotate ALFA to +45.7 degrees' 2008-Apr-29 19:54:23 LOG5 begin_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2008-Apr-29 19:54:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +45.7 degrees ...} 2008-Apr-29 19:54:23 INFO2 rotate_alfa: ALFA commanded to +45.7 degrees 2008-Apr-29 19:54:23 LOG3 sock_errsend: To ALFAMOTOR: POSITION 45.7 REPLY 2008-Apr-29 19:54:23 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-29 19:54:23 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-29 19:54:23 LOG5 begin_task: Level: (4) ID = <10205> Status = 0 0 0 0 ok 2008-Apr-29 19:54:23 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p1_008" 2008-Apr-29 19:54:23 LOG4 got_cormsg: From DATATAKING: set ra 150.85 2008-Apr-29 19:54:23 LOG4 got_cormsg: From DATATAKING: set dec 6.1201033103 2008-Apr-29 19:54:23 LOG4 got_cormsg: From DATATAKING: vw% 150.85 2008-Apr-29 19:54:23 LOG4 got_cormsg: From DATATAKING: vw% 6.1201033103 2008-Apr-29 19:54:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 19:54:23 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-29 19:54:23 LOG4 got_cormsg: From DATATAKING: pnt tr 150.85 6.1201033103 -CF 2008-Apr-29 19:54:23 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-29 19:54:23 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-29 19:54:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 19:54:54 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-29 19:54:54 INFO3 alfa_motor: ALFA rotator in-position +45.70 degrees 2008-Apr-29 19:54:54 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-29 19:54:54 LOG5 end_task: Level: (4) ID = <10205> Status = 0 0 0 0 ok 2008-Apr-29 19:54:54 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-29 19:54:54 STOP finish_task: Finishing task 'rotate ALFA to +45.7 degrees' 2008-Apr-29 19:54:54 LOG5 finish_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2008-Apr-29 19:54:54 INFO2 finish_task: DONE finished configuration: rotating ALFA to +45.7 degrees 2008-Apr-29 19:54:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 19:54:54 STOP end_task: Finishing task 'rotate ALFA to +45.7 degrees' with status 'OK' 2008-Apr-29 19:54:54 LOG5 end_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2008-Apr-29 19:54:54 START begin_task: Starting task 'waiting on telescope' 2008-Apr-29 19:54:54 LOG5 begin_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2008-Apr-29 19:54:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-29 19:54:54 LOG3 waittrk: Start waittrk 5 2008-Apr-29 19:54:54 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-29 19:54:54 LOG5 begin_task: Level: (4) ID = <10207> Status = 0 0 0 0 ok 2008-Apr-29 19:54:59 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-29 19:54:59 LOG5 end_task: Level: (4) ID = <10207> Status = 0 0 0 0 ok 2008-Apr-29 19:54:59 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-29 19:54:59 LOG5 begin_task: Level: (4) ID = <10208> Status = 0 0 0 0 ok 2008-Apr-29 19:56:54 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-29 19:56:54 LOG5 end_task: Level: (4) ID = <10208> Status = 0 0 0 0 ok 2008-Apr-29 19:56:54 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-29 19:56:54 INFO2 waittrk: Now tracking AGES3193_p1_008 2008-Apr-29 19:56:54 LOG4 waittrk: Current telescope position: Az = 150.64 ZA = 6.13 2008-Apr-29 19:56:54 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-29 19:56:54 LOG5 finish_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2008-Apr-29 19:56:54 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-29 19:56:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 19:56:54 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-29 19:56:54 LOG5 end_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2008-Apr-29 19:56:54 START begin_task: Starting task 'selecting calibration type' 2008-Apr-29 19:56:54 LOG5 begin_task: Level: (3) ID = <10209> Status = 0 0 0 0 ok 2008-Apr-29 19:56:54 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-29 19:56:54 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-29 19:56:54 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 19:56:54 START begin_task: Starting task 'waiting on setcal' 2008-Apr-29 19:56:54 LOG5 begin_task: Level: (4) ID = <10210> Status = 0 0 0 0 ok 2008-Apr-29 19:56:54 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-29 19:56:54 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 19:56:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 19:56:55 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-29 19:56:55 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-29 19:56:55 LOG5 end_task: Level: (4) ID = <10210> Status = 0 0 0 0 ok 2008-Apr-29 19:56:55 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-29 19:56:55 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-29 19:56:55 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-29 19:56:55 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-29 19:56:55 LOG5 begin_task: Level: (4) ID = <10211> Status = 0 0 0 0 ok 2008-Apr-29 19:56:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 19:56:56 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-29 19:56:56 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-29 19:56:56 LOG5 end_task: Level: (4) ID = <10211> Status = 0 0 0 0 ok 2008-Apr-29 19:56:56 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-29 19:56:56 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-29 19:56:56 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-29 19:56:56 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-29 19:56:56 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-29 19:56:56 LOG5 begin_task: Level: (4) ID = <10212> Status = 0 0 0 0 ok 2008-Apr-29 19:56:56 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-29 19:56:56 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-29 19:56:56 LOG5 end_task: Level: (4) ID = <10212> Status = 0 0 0 0 ok 2008-Apr-29 19:56:56 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-29 19:56:56 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-29 19:56:56 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-29 19:56:56 LOG5 finish_task: Level: (3) ID = <10209> Status = 0 0 0 0 ok 2008-Apr-29 19:56:56 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-29 19:56:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 19:56:56 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-29 19:56:56 LOG5 end_task: Level: (3) ID = <10209> Status = 0 0 0 0 ok 2008-Apr-29 19:56:56 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2008-Apr-29 19:56:56 INFO2 astwait: Waiting for 141 seconds from 23:56:56 to 23:59:17 UTC ... 2008-Apr-29 19:56:56 LOG4 send_obs_status: To obs_status: <1> TASKTIME 141 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-29 19:56:56 START begin_task: Starting task 'waiting on waiting for AST time' 2008-Apr-29 19:56:56 LOG5 begin_task: Level: (3) ID = <10213> Status = 0 0 0 0 ok 2008-Apr-29 19:59:17 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2008-Apr-29 19:59:17 LOG5 end_task: Level: (3) ID = <10213> Status = 0 0 0 0 ok 2008-Apr-29 19:59:17 INFO3 astwait: Finished waiting 2008-Apr-29 19:59:17 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-29 19:59:17 LOG5 dopset_later: Calling 'dopset_later 60.796293278430682' 2008-Apr-29 19:59:17 INFO3 dopset_later: Setting Doppler correction for 20:00:17 (60.8 seconds from now) 2008-Apr-29 19:59:17 LOG5 antvel: Calling 'antvel 150.850000 6.120103 F 60.796293278430682' 2008-Apr-29 19:59:17 LOG2 antvel: Parameters to Doppler: Heliocentric 86417 2008 120 0.0 2008-Apr-29 19:59:17 INFO5 antvel: Computed antenna velocity: +28.34859 km/s 2008-Apr-29 19:59:17 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=28.3485920207 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-29 19:59:17 INFO4 dopset_gen: New sky frequencies: 1381.112830 1381.112830 1381.112830 1381.112830 1381.112830 1381.112830 1381.112830 1381.112830 1381.112830 2008-Apr-29 19:59:17 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.112830 sky0=1381.112830 sky1=1381.112830 sky2=1381.112830 sky3=1381.112830 sky4=1381.112830 sky5=1381.112830 sky6=1381.112830 sky7=1381.112830 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-29 19:59:17 LOG2 dopset_gen: Result from 'sky2syn': 1631.112830 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-29 19:59:17 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631112830.0} 2008-Apr-29 19:59:17 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 19:59:17 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-29 19:59:17 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-29 19:59:17 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:03.2 Dec = +23:42:32.5 2008-Apr-29 19:59:17 LOG3 track_source: Calling 'track_source AGES3193_p1_008 095203.2 234232.5 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-29 19:59:17 START begin_task: Starting task 'sending tracking commands' 2008-Apr-29 19:59:17 LOG5 begin_task: Level: (3) ID = <10214> Status = 0 0 0 0 ok 2008-Apr-29 19:59:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p1_008} INFO {Slewing to source 'AGES3193_p1_008' ...} 2008-Apr-29 19:59:17 INFO1 track_source: Starting to track AGES3193_p1_008 2008-Apr-29 19:59:17 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p1_008" 2008-Apr-29 19:59:17 LOG3 vw_send: To DATATAKING: set ra 095203.2 2008-Apr-29 19:59:17 LOG3 vw_send: To DATATAKING: set dec 234232.5 2008-Apr-29 19:59:17 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-29 19:59:17 LOG3 vw_send: To DATATAKING: pnt tr 095203.2 234232.5 -CJ 2008-Apr-29 19:59:17 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-29 19:59:17 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-29 19:59:17 LOG5 finish_task: Level: (3) ID = <10214> Status = 0 0 0 0 ok 2008-Apr-29 19:59:17 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-29 19:59:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 19:59:17 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-29 19:59:17 LOG5 end_task: Level: (3) ID = <10214> Status = 0 0 0 0 ok 2008-Apr-29 19:59:17 START begin_task: Starting task 'waiting on telescope' 2008-Apr-29 19:59:17 LOG5 begin_task: Level: (3) ID = <10215> Status = 0 0 0 0 ok 2008-Apr-29 19:59:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-29 19:59:17 LOG3 waittrk: Start waittrk 5 2008-Apr-29 19:59:17 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-29 19:59:17 LOG5 begin_task: Level: (4) ID = <10216> Status = 0 0 0 0 ok 2008-Apr-29 19:59:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631112830.0} 2008-Apr-29 19:59:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 19:59:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 19:59:17 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p1_008" 2008-Apr-29 19:59:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 19:59:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 19:59:17 LOG4 got_cormsg: From DATATAKING: set ra 095203.2 2008-Apr-29 19:59:17 LOG4 got_cormsg: From DATATAKING: set dec 234232.5 2008-Apr-29 19:59:17 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-29 19:59:17 LOG4 got_cormsg: From DATATAKING: pnt tr 095203.2 234232.5 -CJ 2008-Apr-29 19:59:17 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-29 19:59:17 LOG4 got_cormsg: From DATATAKING: 095203.2 2008-Apr-29 19:59:17 LOG4 got_cormsg: From DATATAKING: vw% 234232.5 2008-Apr-29 19:59:17 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2008-Apr-29 19:59:22 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-29 19:59:22 LOG5 end_task: Level: (4) ID = <10216> Status = 0 0 0 0 ok 2008-Apr-29 19:59:22 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-29 19:59:22 LOG5 begin_task: Level: (4) ID = <10217> Status = 0 0 0 0 ok 2008-Apr-29 19:59:24 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-29 19:59:24 LOG5 end_task: Level: (4) ID = <10217> Status = 0 0 0 0 ok 2008-Apr-29 19:59:24 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-29 19:59:24 INFO2 waittrk: Now tracking AGES3193_p1_008 2008-Apr-29 19:59:24 LOG4 waittrk: Current telescope position: Az = 150.51 ZA = 6.14 2008-Apr-29 19:59:24 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-29 19:59:24 LOG5 finish_task: Level: (3) ID = <10215> Status = 0 0 0 0 ok 2008-Apr-29 19:59:24 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-29 19:59:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 19:59:24 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-29 19:59:24 LOG5 end_task: Level: (3) ID = <10215> Status = 0 0 0 0 ok 2008-Apr-29 19:59:24 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-29 19:59:24 LOG5 begin_task: Level: (3) ID = <10218> Status = 0 0 0 0 ok 2008-Apr-29 19:59:24 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-29 19:59:24 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-29 19:59:24 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-29 19:59:24 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-29 19:59:24 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 19:59:24 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-29 19:59:24 LOG5 begin_task: Level: (4) ID = <10219> Status = 0 0 0 0 ok 2008-Apr-29 19:59:24 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-29 19:59:24 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 19:59:27 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 19:59:27 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-29 19:59:27 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-29 19:59:27 LOG5 end_task: Level: (4) ID = <10219> Status = 0 0 0 0 ok 2008-Apr-29 19:59:27 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-29 19:59:27 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-29 19:59:27 LOG5 begin_task: Level: (4) ID = <10220> Status = 0 0 0 0 ok 2008-Apr-29 19:59:27 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-29 19:59:27 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-29 19:59:27 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-29 19:59:27 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-29 19:59:27 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-29 19:59:27 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-29 19:59:27 LOG5 begin_task: Level: (5) ID = <10221> Status = 0 0 0 0 ok 2008-Apr-29 19:59:27 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-29 19:59:27 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 19:59:28 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 1 dB --- beam 1: 7 6 dB 2008-Apr-29 19:59:28 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 2 dB --- beam 5: 6 5 dB 2008-Apr-29 19:59:28 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 3 dB --- beam 3: 4 3 dB 2008-Apr-29 19:59:28 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 2 2 dB 2008-Apr-29 19:59:28 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-29 19:59:28 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-29 19:59:28 LOG5 end_task: Level: (5) ID = <10221> Status = 0 0 0 0 ok 2008-Apr-29 19:59:28 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.115 0.893 ALFA beam 1: 1.030 0.993 2008-Apr-29 19:59:28 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.923 1.090 ALFA beam 3: 0.863 0.964 2008-Apr-29 19:59:28 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.049 1.087 ALFA beam 5: 0.909 1.067 2008-Apr-29 19:59:28 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.903 0.948 ALFA beam 7: 0.985 1.053 2008-Apr-29 19:59:28 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-29 19:59:28 LOG5 finish_task: Level: (4) ID = <10220> Status = 0 0 0 0 ok 2008-Apr-29 19:59:28 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-29 19:59:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 19:59:28 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-29 19:59:28 LOG5 end_task: Level: (4) ID = <10220> Status = 0 0 0 0 ok 2008-Apr-29 19:59:28 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-29 19:59:28 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-29 19:59:28 LOG5 finish_task: Level: (3) ID = <10218> Status = 0 0 0 0 ok 2008-Apr-29 19:59:28 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-29 19:59:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 19:59:28 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-29 19:59:28 LOG5 end_task: Level: (3) ID = <10218> Status = 0 0 0 0 ok 2008-Apr-29 19:59:28 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Karen O'Neil 2008-Apr-29 19:59:28 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Karen O'Neil 2008-Apr-29 19:59:28 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Karen O'Neil 2008-Apr-29 19:59:28 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Karen O'Neil 2008-Apr-29 19:59:28 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-29 19:59:28 START begin_task: Starting task 'WAPP calibration' 2008-Apr-29 19:59:28 LOG5 begin_task: Level: (3) ID = <10222> Status = 0 0 0 0 ok 2008-Apr-29 19:59:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-29 19:59:28 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-29 19:59:28 START begin_task: Starting task 'selecting calibration type' 2008-Apr-29 19:59:28 LOG5 begin_task: Level: (4) ID = <10223> Status = 0 0 0 0 ok 2008-Apr-29 19:59:28 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-29 19:59:28 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-29 19:59:28 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 19:59:28 START begin_task: Starting task 'waiting on setcal' 2008-Apr-29 19:59:28 LOG5 begin_task: Level: (5) ID = <10224> Status = 0 0 0 0 ok 2008-Apr-29 19:59:28 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Karen O'Neil' 2008-Apr-29 19:59:28 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-29 19:59:28 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 19:59:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 19:59:29 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-29 19:59:29 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-29 19:59:29 LOG5 end_task: Level: (5) ID = <10224> Status = 0 0 0 0 ok 2008-Apr-29 19:59:29 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-29 19:59:29 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-29 19:59:29 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-29 19:59:29 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-29 19:59:29 LOG5 begin_task: Level: (5) ID = <10225> Status = 0 0 0 0 ok 2008-Apr-29 19:59:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 19:59:29 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-29 19:59:29 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-29 19:59:29 LOG5 end_task: Level: (5) ID = <10225> Status = 0 0 0 0 ok 2008-Apr-29 19:59:29 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-29 19:59:29 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-29 19:59:29 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-29 19:59:29 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-29 19:59:29 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-29 19:59:29 LOG5 begin_task: Level: (5) ID = <10226> Status = 0 0 0 0 ok 2008-Apr-29 19:59:29 NOTE WAPPDATA-new_file: New FITS file: wapp.20080429.a2048.0004.fits 2008-Apr-29 19:59:29 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-29 19:59:29 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-29 19:59:29 LOG5 end_task: Level: (5) ID = <10226> Status = 0 0 0 0 ok 2008-Apr-29 19:59:29 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-29 19:59:29 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-29 19:59:29 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-29 19:59:29 LOG5 finish_task: Level: (4) ID = <10223> Status = 0 0 0 0 ok 2008-Apr-29 19:59:29 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-29 19:59:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 19:59:29 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-29 19:59:29 LOG5 end_task: Level: (4) ID = <10223> Status = 0 0 0 0 ok 2008-Apr-29 19:59:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-29 19:59:29 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-29 19:59:29 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-29 19:59:29 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-29 19:59:29 LOG5 begin_task: Level: (4) ID = <10227> Status = 0 0 0 0 ok 2008-Apr-29 19:59:29 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080429.a2048.0004.fits} 2008-Apr-29 19:59:29 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-29 19:59:29 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-29 19:59:29 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-29 19:59:29 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-29 19:59:29 LOG5 end_task: Level: (4) ID = <10227> Status = 0 0 0 0 ok 2008-Apr-29 19:59:29 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-29 19:59:29 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-29 19:59:29 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-29 19:59:29 LOG5 begin_task: Level: (4) ID = <10228> Status = 0 0 0 0 ok 2008-Apr-29 19:59:29 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-29 19:59:29 LOG5 log_alfabeam: Parameters: 9.8675555555555547 23.709027777777777 10.094868 2008.3308226544477 45.699997 2008-Apr-29 19:59:29 LOG4 log_alfabeam: ALFABEAM 0 9.867555555555573 23.709027777777784 2008-Apr-29 19:59:29 LOG4 log_alfabeam: ALFABEAM 1 9.869845956729703 23.608249560422355 2008-Apr-29 19:59:29 LOG4 log_alfabeam: ALFABEAM 2 9.874349652305728 23.675205979367806 2008-Apr-29 19:59:29 LOG4 log_alfabeam: ALFABEAM 3 9.872173993873378 23.776493199486453 2008-Apr-29 19:59:29 LOG4 log_alfabeam: ALFABEAM 4 9.865316958114176 23.810133600443141 2008-Apr-29 19:59:29 LOG4 log_alfabeam: ALFABEAM 5 9.860683501685688 23.741406646818575 2008-Apr-29 19:59:29 LOG4 log_alfabeam: ALFABEAM 6 9.863036568173438 23.640823525711554 2008-Apr-29 19:59:29 INFO2 take_spectra: Starting WAPP scan: 812000121 2008-Apr-29 19:59:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-29 19:59:30 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-29 19:59:30 LOG5 begin_task: Level: (5) ID = <10229> Status = 0 0 0 0 ok 2008-Apr-29 19:59:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-29 19:59:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 86371.00 2008-Apr-29 19:59:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.112830 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-29 19:59:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.112830 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 19:59:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.112830 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 19:59:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.112830 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 19:59:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.112830 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 19:59:36 LOG3 WAPP=2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.112830 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 19:59:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.112830 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 19:59:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.112830 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 19:59:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.112830 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 19:59:36 LOG3 WAPP=1-save_rfcalc: Channel 5: Sky freq = 1381.112830 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 19:59:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-29 19:59:36 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-29 19:59:36 LOG5 end_task: Level: (5) ID = <10229> Status = 0 0 0 0 ok 2008-Apr-29 19:59:36 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-29 19:59:36 LOG5 end_task: Level: (4) ID = <10228> Status = 0 0 0 0 ok 2008-Apr-29 19:59:36 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-29 19:59:36 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-29 19:59:36 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-29 19:59:36 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-29 19:59:36 LOG5 begin_task: Level: (4) ID = <10230> Status = 0 0 0 0 ok 2008-Apr-29 19:59:36 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-29 19:59:36 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-29 19:59:36 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-29 19:59:36 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-29 19:59:36 LOG5 end_task: Level: (4) ID = <10230> Status = 0 0 0 0 ok 2008-Apr-29 19:59:37 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-29 19:59:37 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-29 19:59:37 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-29 19:59:37 LOG5 begin_task: Level: (4) ID = <10231> Status = 0 0 0 0 ok 2008-Apr-29 19:59:37 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-29 19:59:37 LOG5 log_alfabeam: Parameters: 9.8675555555555547 23.709027777777777 10.096818 2008.3308228762642 45.699997 2008-Apr-29 19:59:37 LOG4 log_alfabeam: ALFABEAM 0 9.867555555555562 23.709027777777781 2008-Apr-29 19:59:37 LOG4 log_alfabeam: ALFABEAM 1 9.869874739697178 23.608373778053540 2008-Apr-29 19:59:37 LOG4 log_alfabeam: ALFABEAM 2 9.874359384446828 23.675575065528140 2008-Apr-29 19:59:37 LOG4 log_alfabeam: ALFABEAM 3 9.872154510402295 23.776743158036979 2008-Apr-29 19:59:37 LOG4 log_alfabeam: ALFABEAM 4 9.865287914429910 23.810011421369708 2008-Apr-29 19:59:37 LOG4 log_alfabeam: ALFABEAM 5 9.860674364527325 23.741036452389821 2008-Apr-29 19:59:37 LOG4 log_alfabeam: ALFABEAM 6 9.863056038059108 23.640580527185367 2008-Apr-29 19:59:37 INFO2 take_spectra: Starting WAPP scan: 812000122 2008-Apr-29 19:59:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-29 19:59:37 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-29 19:59:37 LOG5 begin_task: Level: (5) ID = <10232> Status = 0 0 0 0 ok 2008-Apr-29 19:59:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-29 19:59:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 86378.00 2008-Apr-29 19:59:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.546 > 1.4)! 2008-Apr-29 19:59:42 LOG4 check_wapp_levels: WAPP-1 power levels: 1.546 1.125 1.411 1.354 2008-Apr-29 19:59:42 LOG4 check_wapp_levels: WAPP-2 power levels: 1.266 1.513 1.228 1.329 2008-Apr-29 19:59:42 LOG4 check_wapp_levels: WAPP-3 power levels: 1.476 1.519 1.273 1.437 2008-Apr-29 19:59:42 LOG4 check_wapp_levels: WAPP-4 power levels: 1.289 1.339 1.406 1.486 2008-Apr-29 19:59:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.112830 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-29 19:59:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.112830 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 19:59:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.112830 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 19:59:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.112830 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 19:59:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.112830 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 19:59:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.112830 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 19:59:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.112830 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 19:59:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.112830 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 19:59:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.112830 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 19:59:43 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-29 19:59:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-29 19:59:43 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-29 19:59:43 LOG5 end_task: Level: (5) ID = <10232> Status = 0 0 0 0 ok 2008-Apr-29 19:59:43 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-29 19:59:43 LOG5 end_task: Level: (4) ID = <10231> Status = 0 0 0 0 ok 2008-Apr-29 19:59:43 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-29 19:59:43 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-29 19:59:43 LOG5 finish_task: Level: (3) ID = <10222> Status = 0 0 0 0 ok 2008-Apr-29 19:59:43 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-29 19:59:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 19:59:43 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-29 19:59:43 LOG5 end_task: Level: (3) ID = <10222> Status = 0 0 0 0 ok 2008-Apr-29 19:59:43 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-29 19:59:44 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 150.85 and ZA = 6.12 2008-Apr-29 19:59:44 LOG3 track_source: Calling 'track_source AGES3193_p1_008 150.85 6.1201033103 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-29 19:59:44 START begin_task: Starting task 'sending tracking commands' 2008-Apr-29 19:59:44 LOG5 begin_task: Level: (3) ID = <10233> Status = 0 0 0 0 ok 2008-Apr-29 19:59:44 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p1_008} INFO {Slewing to source 'AGES3193_p1_008' ...} 2008-Apr-29 19:59:44 INFO1 track_source: Starting to track AGES3193_p1_008 2008-Apr-29 19:59:44 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p1_008" 2008-Apr-29 19:59:44 LOG3 vw_send: To DATATAKING: set ra 150.85 2008-Apr-29 19:59:44 LOG3 vw_send: To DATATAKING: set dec 6.1201033103 2008-Apr-29 19:59:44 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-29 19:59:44 LOG3 vw_send: To DATATAKING: pnt tr 150.85 6.1201033103 -CF 2008-Apr-29 19:59:44 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-29 19:59:44 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-29 19:59:44 LOG5 finish_task: Level: (3) ID = <10233> Status = 0 0 0 0 ok 2008-Apr-29 19:59:44 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-29 19:59:44 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 19:59:44 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-29 19:59:44 LOG5 end_task: Level: (3) ID = <10233> Status = 0 0 0 0 ok 2008-Apr-29 19:59:44 LOG1 fixed_driftmap: Parameters: HA = +00:13:00.1 Start = 10:06:29.5 LST = 10:05:55.6 diff = 33.9 secs 2008-Apr-29 19:59:44 INFO2 fixed_driftmap: Waiting 31.9 seconds for RA 9:53:29 2008-Apr-29 19:59:44 INFO2 lstwait: Waiting for 31.8 secs from LST 10:05:56 to LST 10:06:27 ... 2008-Apr-29 19:59:44 LOG4 send_obs_status: To obs_status: <1> TASKTIME 31.800081296668377 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-29 19:59:44 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-29 19:59:44 LOG5 begin_task: Level: (3) ID = <10234> Status = 0 0 0 0 ok 2008-Apr-29 19:59:44 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p1_008" 2008-Apr-29 19:59:44 LOG4 got_cormsg: From DATATAKING: set ra 150.85 2008-Apr-29 19:59:44 LOG4 got_cormsg: From DATATAKING: set dec 6.1201033103 2008-Apr-29 19:59:44 LOG4 got_cormsg: From DATATAKING: vw% 150.85 2008-Apr-29 19:59:44 LOG4 got_cormsg: From DATATAKING: vw% 6.1201033103 2008-Apr-29 19:59:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 19:59:44 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-29 19:59:44 LOG4 got_cormsg: From DATATAKING: pnt tr 150.85 6.1201033103 -CF 2008-Apr-29 19:59:44 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-29 19:59:44 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-29 19:59:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 19:59:48 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.830 and 1.111 2008-Apr-29 20:00:16 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-29 20:00:16 LOG5 end_task: Level: (3) ID = <10234> Status = 0 0 0 0 ok 2008-Apr-29 20:00:16 LOG4 lstwait: Finished waiting, the gui caused difference: 0.19965404000146236 2008-Apr-29 20:00:16 INFO3 lstwait: Finished waiting 2008-Apr-29 20:00:16 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-29 20:00:16 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-29 20:00:16 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-29 20:00:16 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-29 20:00:16 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-29 20:00:16 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-29 20:00:16 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-29 20:00:16 LOG5 begin_task: Level: (3) ID = <10235> Status = 0 0 0 0 ok 2008-Apr-29 20:00:16 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-29 20:00:16 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-29 20:00:16 INFO2 take_spectra: Starting WAPP scan: 812000123 2008-Apr-29 20:00:16 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-29 20:00:16 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-29 20:00:16 LOG5 begin_task: Level: (4) ID = <10236> Status = 0 0 0 0 ok 2008-Apr-29 20:00:16 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-29 20:00:16 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17.00 2008-Apr-29 20:00:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.112830 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-29 20:00:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.112830 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 20:00:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.112830 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 20:00:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.112830 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 20:00:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.112830 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 20:00:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.112830 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 20:00:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.112830 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 20:00:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.112830 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 20:00:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.112830 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 20:15:31 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 20:15:31.300 (seconds: 72931.300)!} 2008-Apr-29 20:15:31 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 20:15:31.300 (seconds: 72931.300)! 2008-Apr-29 20:15:32 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 72930.0 to 72931.0! 2008-Apr-29 20:15:33 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (72930.0 - 72932.0)! 2008-Apr-29 20:20:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-29 20:20:17 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-29 20:20:17 LOG5 end_task: Level: (4) ID = <10236> Status = 0 0 0 0 ok 2008-Apr-29 20:20:17 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-29 20:20:17 LOG5 end_task: Level: (3) ID = <10235> Status = 0 0 0 0 ok 2008-Apr-29 20:20:17 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-29 20:20:17 LOG5 finish_task: Level: (2) ID = <10202> Status = 0 0 0 0 ok 2008-Apr-29 20:20:17 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-29 20:20:17 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-29 20:20:17 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-29 20:20:17 LOG5 end_task: Level: (2) ID = <10202> Status = 0 0 0 0 ok 2008-Apr-29 20:20:17 COMMAND run_command_line: EXECUTING command 23: 'FIXEDDRIFT az=123.63 alfaangle=74.7 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p1_010 ra=95300.00 dec=233930.00' 2008-Apr-29 20:20:17 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-29 20:20:18 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-29 20:20:18 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 123.63 74.7 hcorcal 5 tracking no first 1 AGES3193_p1_010 95300.00 233930.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-29 20:20:18 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-29 20:20:18 LOG5 begin_task: Level: (2) ID = <10237> Status = 0 0 0 0 ok 2008-Apr-29 20:20:18 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES3193_p1_008' 2008-Apr-29 20:20:18 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-29 20:20:18 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p1_010} 2008-Apr-29 20:20:18 INFO3 fixed_driftmap: Sending telescope to Az = 123.63 and ZA = 9.91 2008-Apr-29 20:20:18 LOG3 track_source: Calling 'track_source AGES3193_p1_010 123.63 9.9115003437 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-29 20:20:18 START begin_task: Starting task 'sending tracking commands' 2008-Apr-29 20:20:18 LOG5 begin_task: Level: (3) ID = <10238> Status = 0 0 0 0 ok 2008-Apr-29 20:20:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p1_010} INFO {Slewing to source 'AGES3193_p1_010' ...} 2008-Apr-29 20:20:18 INFO1 track_source: Starting to track AGES3193_p1_010 2008-Apr-29 20:20:18 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p1_010" 2008-Apr-29 20:20:18 LOG3 vw_send: To DATATAKING: set ra 123.63 2008-Apr-29 20:20:18 LOG3 vw_send: To DATATAKING: set dec 9.9115003437 2008-Apr-29 20:20:18 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-29 20:20:18 LOG3 vw_send: To DATATAKING: pnt tr 123.63 9.9115003437 -CF 2008-Apr-29 20:20:18 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-29 20:20:18 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-29 20:20:18 LOG5 finish_task: Level: (3) ID = <10238> Status = 0 0 0 0 ok 2008-Apr-29 20:20:18 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-29 20:20:18 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 20:20:18 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-29 20:20:18 LOG5 end_task: Level: (3) ID = <10238> Status = 0 0 0 0 ok 2008-Apr-29 20:20:18 START begin_task: Starting task 'rotate ALFA to +74.7 degrees' 2008-Apr-29 20:20:18 LOG5 begin_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2008-Apr-29 20:20:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +74.7 degrees ...} 2008-Apr-29 20:20:18 INFO2 rotate_alfa: ALFA commanded to +74.7 degrees 2008-Apr-29 20:20:18 LOG3 sock_errsend: To ALFAMOTOR: POSITION 74.7 REPLY 2008-Apr-29 20:20:18 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-29 20:20:18 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-29 20:20:18 LOG5 begin_task: Level: (4) ID = <10240> Status = 0 0 0 0 ok 2008-Apr-29 20:20:18 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p1_010" 2008-Apr-29 20:20:18 LOG4 got_cormsg: From DATATAKING: set ra 123.63 2008-Apr-29 20:20:18 LOG4 got_cormsg: From DATATAKING: set dec 9.9115003437 2008-Apr-29 20:20:18 LOG4 got_cormsg: From DATATAKING: vw% 123.63 2008-Apr-29 20:20:18 LOG4 got_cormsg: From DATATAKING: vw% 9.9115003437 2008-Apr-29 20:20:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 20:20:18 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-29 20:20:18 LOG4 got_cormsg: From DATATAKING: pnt tr 123.63 9.9115003437 -CF 2008-Apr-29 20:20:18 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-29 20:20:18 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-29 20:20:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 20:20:35 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-29 20:20:35 INFO3 alfa_motor: ALFA rotator in-position +74.70 degrees 2008-Apr-29 20:20:35 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-29 20:20:35 LOG5 end_task: Level: (4) ID = <10240> Status = 0 0 0 0 ok 2008-Apr-29 20:20:35 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-29 20:20:36 STOP finish_task: Finishing task 'rotate ALFA to +74.7 degrees' 2008-Apr-29 20:20:36 LOG5 finish_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2008-Apr-29 20:20:36 INFO2 finish_task: DONE finished configuration: rotating ALFA to +74.7 degrees 2008-Apr-29 20:20:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 20:20:36 STOP end_task: Finishing task 'rotate ALFA to +74.7 degrees' with status 'OK' 2008-Apr-29 20:20:36 LOG5 end_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2008-Apr-29 20:20:36 START begin_task: Starting task 'waiting on telescope' 2008-Apr-29 20:20:36 LOG5 begin_task: Level: (3) ID = <10241> Status = 0 0 0 0 ok 2008-Apr-29 20:20:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-29 20:20:36 LOG3 waittrk: Start waittrk 5 2008-Apr-29 20:20:36 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-29 20:20:36 LOG5 begin_task: Level: (4) ID = <10242> Status = 0 0 0 0 ok 2008-Apr-29 20:20:41 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-29 20:20:41 LOG5 end_task: Level: (4) ID = <10242> Status = 0 0 0 0 ok 2008-Apr-29 20:20:41 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-29 20:20:41 LOG5 begin_task: Level: (4) ID = <10243> Status = 0 0 0 0 ok 2008-Apr-29 20:22:00 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-29 20:22:00 LOG5 end_task: Level: (4) ID = <10243> Status = 0 0 0 0 ok 2008-Apr-29 20:22:00 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-29 20:22:00 INFO2 waittrk: Now tracking AGES3193_p1_010 2008-Apr-29 20:22:00 LOG4 waittrk: Current telescope position: Az = 123.43 ZA = 9.92 2008-Apr-29 20:22:00 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-29 20:22:00 LOG5 finish_task: Level: (3) ID = <10241> Status = 0 0 0 0 ok 2008-Apr-29 20:22:00 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-29 20:22:00 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 20:22:00 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-29 20:22:00 LOG5 end_task: Level: (3) ID = <10241> Status = 0 0 0 0 ok 2008-Apr-29 20:22:00 START begin_task: Starting task 'selecting calibration type' 2008-Apr-29 20:22:00 LOG5 begin_task: Level: (3) ID = <10244> Status = 0 0 0 0 ok 2008-Apr-29 20:22:00 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-29 20:22:00 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-29 20:22:00 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 20:22:00 START begin_task: Starting task 'waiting on setcal' 2008-Apr-29 20:22:00 LOG5 begin_task: Level: (4) ID = <10245> Status = 0 0 0 0 ok 2008-Apr-29 20:22:00 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-29 20:22:00 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 20:22:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 20:22:01 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-29 20:22:01 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-29 20:22:01 LOG5 end_task: Level: (4) ID = <10245> Status = 0 0 0 0 ok 2008-Apr-29 20:22:01 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-29 20:22:01 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-29 20:22:01 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-29 20:22:01 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-29 20:22:01 LOG5 begin_task: Level: (4) ID = <10246> Status = 0 0 0 0 ok 2008-Apr-29 20:22:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 20:22:01 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-29 20:22:01 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-29 20:22:01 LOG5 end_task: Level: (4) ID = <10246> Status = 0 0 0 0 ok 2008-Apr-29 20:22:01 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-29 20:22:01 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-29 20:22:01 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-29 20:22:01 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-29 20:22:01 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-29 20:22:01 LOG5 begin_task: Level: (4) ID = <10247> Status = 0 0 0 0 ok 2008-Apr-29 20:22:01 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-29 20:22:01 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-29 20:22:01 LOG5 end_task: Level: (4) ID = <10247> Status = 0 0 0 0 ok 2008-Apr-29 20:22:01 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-29 20:22:01 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-29 20:22:01 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-29 20:22:01 LOG5 finish_task: Level: (3) ID = <10244> Status = 0 0 0 0 ok 2008-Apr-29 20:22:01 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-29 20:22:01 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 20:22:01 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-29 20:22:01 LOG5 end_task: Level: (3) ID = <10244> Status = 0 0 0 0 ok 2008-Apr-29 20:22:01 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2008-Apr-29 20:22:01 INFO2 astwait: Waiting for 12 seconds from 00:22:01 to 00:22:13 UTC ... 2008-Apr-29 20:22:01 LOG4 send_obs_status: To obs_status: <1> TASKTIME 12 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-29 20:22:01 START begin_task: Starting task 'waiting on waiting for AST time' 2008-Apr-29 20:22:01 LOG5 begin_task: Level: (3) ID = <10248> Status = 0 0 0 0 ok 2008-Apr-29 20:22:13 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2008-Apr-29 20:22:13 LOG5 end_task: Level: (3) ID = <10248> Status = 0 0 0 0 ok 2008-Apr-29 20:22:13 INFO3 astwait: Finished waiting 2008-Apr-29 20:22:13 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-29 20:22:13 LOG5 dopset_later: Calling 'dopset_later 60.742159250663036' 2008-Apr-29 20:22:13 INFO3 dopset_later: Setting Doppler correction for 20:23:13 (60.7 seconds from now) 2008-Apr-29 20:22:13 LOG5 antvel: Calling 'antvel 123.630000 9.911500 F 60.742159250663036' 2008-Apr-29 20:22:13 LOG2 antvel: Parameters to Doppler: Heliocentric 87793 2008 120 0.0 2008-Apr-29 20:22:13 INFO5 antvel: Computed antenna velocity: +28.39283 km/s 2008-Apr-29 20:22:13 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=28.392831663700001 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-29 20:22:13 INFO4 dopset_gen: New sky frequencies: 1381.112626 1381.112626 1381.112626 1381.112626 1381.112626 1381.112626 1381.112626 1381.112626 1381.112626 2008-Apr-29 20:22:13 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.112626 sky0=1381.112626 sky1=1381.112626 sky2=1381.112626 sky3=1381.112626 sky4=1381.112626 sky5=1381.112626 sky6=1381.112626 sky7=1381.112626 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-29 20:22:13 LOG2 dopset_gen: Result from 'sky2syn': 1631.112626 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-29 20:22:13 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631112626.0} 2008-Apr-29 20:22:13 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 20:22:13 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-29 20:22:13 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-29 20:22:13 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:03.2 Dec = +23:39:32.5 2008-Apr-29 20:22:13 LOG3 track_source: Calling 'track_source AGES3193_p1_010 095203.2 233932.5 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-29 20:22:13 START begin_task: Starting task 'sending tracking commands' 2008-Apr-29 20:22:13 LOG5 begin_task: Level: (3) ID = <10249> Status = 0 0 0 0 ok 2008-Apr-29 20:22:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p1_010} INFO {Slewing to source 'AGES3193_p1_010' ...} 2008-Apr-29 20:22:13 INFO1 track_source: Starting to track AGES3193_p1_010 2008-Apr-29 20:22:13 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p1_010" 2008-Apr-29 20:22:13 LOG3 vw_send: To DATATAKING: set ra 095203.2 2008-Apr-29 20:22:13 LOG3 vw_send: To DATATAKING: set dec 233932.5 2008-Apr-29 20:22:13 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-29 20:22:13 LOG3 vw_send: To DATATAKING: pnt tr 095203.2 233932.5 -CJ 2008-Apr-29 20:22:13 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-29 20:22:13 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-29 20:22:13 LOG5 finish_task: Level: (3) ID = <10249> Status = 0 0 0 0 ok 2008-Apr-29 20:22:13 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-29 20:22:13 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 20:22:13 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-29 20:22:13 LOG5 end_task: Level: (3) ID = <10249> Status = 0 0 0 0 ok 2008-Apr-29 20:22:13 START begin_task: Starting task 'waiting on telescope' 2008-Apr-29 20:22:13 LOG5 begin_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2008-Apr-29 20:22:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-29 20:22:13 LOG3 waittrk: Start waittrk 5 2008-Apr-29 20:22:13 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-29 20:22:13 LOG5 begin_task: Level: (4) ID = <10251> Status = 0 0 0 0 ok 2008-Apr-29 20:22:13 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631112626.0} 2008-Apr-29 20:22:13 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 20:22:13 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p1_010" 2008-Apr-29 20:22:13 LOG4 got_cormsg: From DATATAKING: set ra 095203.2 2008-Apr-29 20:22:13 LOG4 got_cormsg: From DATATAKING: set dec 233932.5 2008-Apr-29 20:22:13 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-29 20:22:13 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-29 20:22:13 LOG4 got_cormsg: From DATATAKING: pnt tr 095203.2 233932.5 -CJ 2008-Apr-29 20:22:13 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-29 20:22:13 LOG4 got_cormsg: From DATATAKING: vw% 095203.2 2008-Apr-29 20:22:13 LOG4 got_cormsg: From DATATAKING: vw% 233932.5 2008-Apr-29 20:22:13 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2008-Apr-29 20:22:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 20:22:18 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-29 20:22:18 LOG5 end_task: Level: (4) ID = <10251> Status = 0 0 0 0 ok 2008-Apr-29 20:22:18 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-29 20:22:18 LOG5 begin_task: Level: (4) ID = <10252> Status = 0 0 0 0 ok 2008-Apr-29 20:22:20 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-29 20:22:20 LOG5 end_task: Level: (4) ID = <10252> Status = 0 0 0 0 ok 2008-Apr-29 20:22:20 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-29 20:22:20 INFO2 waittrk: Now tracking AGES3193_p1_010 2008-Apr-29 20:22:20 LOG4 waittrk: Current telescope position: Az = 123.38 ZA = 9.93 2008-Apr-29 20:22:20 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-29 20:22:20 LOG5 finish_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2008-Apr-29 20:22:20 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-29 20:22:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 20:22:20 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-29 20:22:20 LOG5 end_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2008-Apr-29 20:22:20 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-29 20:22:20 LOG5 begin_task: Level: (3) ID = <10253> Status = 0 0 0 0 ok 2008-Apr-29 20:22:20 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-29 20:22:20 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-29 20:22:20 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-29 20:22:20 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-29 20:22:20 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 20:22:20 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-29 20:22:20 LOG5 begin_task: Level: (4) ID = <10254> Status = 0 0 0 0 ok 2008-Apr-29 20:22:21 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-29 20:22:21 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 20:22:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 20:22:23 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-29 20:22:23 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-29 20:22:23 LOG5 end_task: Level: (4) ID = <10254> Status = 0 0 0 0 ok 2008-Apr-29 20:22:23 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-29 20:22:23 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-29 20:22:23 LOG5 begin_task: Level: (4) ID = <10255> Status = 0 0 0 0 ok 2008-Apr-29 20:22:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-29 20:22:23 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-29 20:22:23 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-29 20:22:23 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-29 20:22:23 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-29 20:22:24 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-29 20:22:24 LOG5 begin_task: Level: (5) ID = <10256> Status = 0 0 0 0 ok 2008-Apr-29 20:22:24 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-29 20:22:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 20:22:24 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 1 dB --- beam 1: 7 6 dB 2008-Apr-29 20:22:24 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 2 dB --- beam 5: 6 5 dB 2008-Apr-29 20:22:24 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-29 20:22:24 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 2 2 dB 2008-Apr-29 20:22:24 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-29 20:22:24 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-29 20:22:24 LOG5 end_task: Level: (5) ID = <10256> Status = 0 0 0 0 ok 2008-Apr-29 20:22:24 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.878 0.891 ALFA beam 1: 1.062 1.011 2008-Apr-29 20:22:24 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.980 0.874 ALFA beam 3: 0.915 0.968 2008-Apr-29 20:22:24 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.061 1.075 ALFA beam 5: 0.915 1.084 2008-Apr-29 20:22:24 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.916 0.968 ALFA beam 7: 0.996 1.073 2008-Apr-29 20:22:24 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-29 20:22:24 LOG5 finish_task: Level: (4) ID = <10255> Status = 0 0 0 0 ok 2008-Apr-29 20:22:24 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-29 20:22:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 20:22:24 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-29 20:22:24 LOG5 end_task: Level: (4) ID = <10255> Status = 0 0 0 0 ok 2008-Apr-29 20:22:24 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-29 20:22:24 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-29 20:22:24 LOG5 finish_task: Level: (3) ID = <10253> Status = 0 0 0 0 ok 2008-Apr-29 20:22:24 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-29 20:22:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 20:22:24 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-29 20:22:24 LOG5 end_task: Level: (3) ID = <10253> Status = 0 0 0 0 ok 2008-Apr-29 20:22:24 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Karen O'Neil 2008-Apr-29 20:22:24 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Karen O'Neil 2008-Apr-29 20:22:24 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Karen O'Neil 2008-Apr-29 20:22:24 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Karen O'Neil 2008-Apr-29 20:22:24 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-29 20:22:24 START begin_task: Starting task 'WAPP calibration' 2008-Apr-29 20:22:24 LOG5 begin_task: Level: (3) ID = <10257> Status = 0 0 0 0 ok 2008-Apr-29 20:22:24 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-29 20:22:24 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-29 20:22:24 START begin_task: Starting task 'selecting calibration type' 2008-Apr-29 20:22:24 LOG5 begin_task: Level: (4) ID = <10258> Status = 0 0 0 0 ok 2008-Apr-29 20:22:24 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-29 20:22:24 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-29 20:22:24 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 20:22:24 START begin_task: Starting task 'waiting on setcal' 2008-Apr-29 20:22:24 LOG5 begin_task: Level: (5) ID = <10259> Status = 0 0 0 0 ok 2008-Apr-29 20:22:24 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Karen O'Neil' 2008-Apr-29 20:22:25 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-29 20:22:25 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 20:22:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 20:22:25 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-29 20:22:25 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-29 20:22:25 LOG5 end_task: Level: (5) ID = <10259> Status = 0 0 0 0 ok 2008-Apr-29 20:22:25 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-29 20:22:25 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-29 20:22:25 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-29 20:22:25 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-29 20:22:25 LOG5 begin_task: Level: (5) ID = <10260> Status = 0 0 0 0 ok 2008-Apr-29 20:22:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 20:22:25 NOTE WAPPDATA-new_file: New FITS file: wapp.20080429.a2048.0005.fits 2008-Apr-29 20:22:25 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080429.a2048.0005.fits} 2008-Apr-29 20:22:25 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-29 20:22:25 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-29 20:22:25 LOG5 end_task: Level: (5) ID = <10260> Status = 0 0 0 0 ok 2008-Apr-29 20:22:25 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-29 20:22:25 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-29 20:22:25 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-29 20:22:25 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-29 20:22:25 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-29 20:22:25 LOG5 begin_task: Level: (5) ID = <10261> Status = 0 0 0 0 ok 2008-Apr-29 20:22:25 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-29 20:22:25 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-29 20:22:25 LOG5 end_task: Level: (5) ID = <10261> Status = 0 0 0 0 ok 2008-Apr-29 20:22:25 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-29 20:22:25 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-29 20:22:25 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-29 20:22:25 LOG5 finish_task: Level: (4) ID = <10258> Status = 0 0 0 0 ok 2008-Apr-29 20:22:25 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-29 20:22:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 20:22:25 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-29 20:22:25 LOG5 end_task: Level: (4) ID = <10258> Status = 0 0 0 0 ok 2008-Apr-29 20:22:25 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-29 20:22:25 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-29 20:22:25 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-29 20:22:25 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-29 20:22:25 LOG5 begin_task: Level: (4) ID = <10262> Status = 0 0 0 0 ok 2008-Apr-29 20:22:25 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-29 20:22:25 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-29 20:22:25 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-29 20:22:25 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-29 20:22:25 LOG5 end_task: Level: (4) ID = <10262> Status = 0 0 0 0 ok 2008-Apr-29 20:22:25 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-29 20:22:25 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-29 20:22:25 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-29 20:22:25 LOG5 begin_task: Level: (4) ID = <10263> Status = 0 0 0 0 ok 2008-Apr-29 20:22:25 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-29 20:22:25 LOG5 log_alfabeam: Parameters: 9.8675555555555547 23.659027777777776 10.478137 2008.3308662572565 74.699921 2008-Apr-29 20:22:25 LOG4 log_alfabeam: ALFABEAM 0 9.867555555555557 23.659027777777784 2008-Apr-29 20:22:25 LOG4 log_alfabeam: ALFABEAM 1 9.869994864885918 23.565608645557607 2008-Apr-29 20:22:25 LOG4 log_alfabeam: ALFABEAM 2 9.874900099898280 23.627776237794105 2008-Apr-29 20:22:25 LOG4 log_alfabeam: ALFABEAM 3 9.872516695990747 23.721354653333432 2008-Apr-29 20:22:25 LOG4 log_alfabeam: ALFABEAM 4 9.865174243003468 23.753069682463391 2008-Apr-29 20:22:25 LOG4 log_alfabeam: ALFABEAM 5 9.860193056162746 23.689745282384074 2008-Apr-29 20:22:25 LOG4 log_alfabeam: ALFABEAM 6 9.862630619418155 23.595862111022363 2008-Apr-29 20:22:25 INFO2 take_spectra: Starting WAPP scan: 812000124 2008-Apr-29 20:22:26 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-29 20:22:26 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-29 20:22:26 LOG5 begin_task: Level: (5) ID = <10264> Status = 0 0 0 0 ok 2008-Apr-29 20:22:26 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-29 20:22:26 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1347.00 2008-Apr-29 20:22:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.112626 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-29 20:22:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.112626 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 20:22:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.112626 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 20:22:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.112626 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 20:22:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.112626 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 20:22:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.112626 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 20:22:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.112626 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 20:22:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.112626 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 20:22:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.112626 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 20:22:32 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-29 20:22:32 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-29 20:22:32 LOG5 end_task: Level: (5) ID = <10264> Status = 0 0 0 0 ok 2008-Apr-29 20:22:32 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-29 20:22:32 LOG5 end_task: Level: (4) ID = <10263> Status = 0 0 0 0 ok 2008-Apr-29 20:22:32 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-29 20:22:32 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-29 20:22:32 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-29 20:22:32 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-29 20:22:32 LOG5 begin_task: Level: (4) ID = <10265> Status = 0 0 0 0 ok 2008-Apr-29 20:22:33 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-29 20:22:33 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-29 20:22:33 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-29 20:22:33 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-29 20:22:33 LOG5 end_task: Level: (4) ID = <10265> Status = 0 0 0 0 ok 2008-Apr-29 20:22:33 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-29 20:22:33 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-29 20:22:33 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-29 20:22:33 LOG5 begin_task: Level: (4) ID = <10266> Status = 0 0 0 0 ok 2008-Apr-29 20:22:33 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-29 20:22:33 LOG5 log_alfabeam: Parameters: 9.8675555555555547 23.659027777777776 10.480086 2008.3308664790732 74.699921 2008-Apr-29 20:22:33 LOG4 log_alfabeam: ALFABEAM 0 9.867555555555564 23.659027777777769 2008-Apr-29 20:22:33 LOG4 log_alfabeam: ALFABEAM 1 9.870005288665407 23.565659786301815 2008-Apr-29 20:22:33 LOG4 log_alfabeam: ALFABEAM 2 9.874903626440382 23.627932731095964 2008-Apr-29 20:22:33 LOG4 log_alfabeam: ALFABEAM 3 9.872509642545454 23.721460851759154 2008-Apr-29 20:22:33 LOG4 log_alfabeam: ALFABEAM 4 9.865163589536376 23.753018273592442 2008-Apr-29 20:22:33 LOG4 log_alfabeam: ALFABEAM 5 9.860189631001660 23.689589489693098 2008-Apr-29 20:22:33 LOG4 log_alfabeam: ALFABEAM 6 9.862637689577442 23.595758584264733 2008-Apr-29 20:22:33 INFO2 take_spectra: Starting WAPP scan: 812000125 2008-Apr-29 20:22:33 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-29 20:22:33 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-29 20:22:33 LOG5 begin_task: Level: (5) ID = <10267> Status = 0 0 0 0 ok 2008-Apr-29 20:22:33 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-29 20:22:33 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1354.00 2008-Apr-29 20:22:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.508 > 1.4)! 2008-Apr-29 20:22:38 LOG4 check_wapp_levels: WAPP-1 power levels: 1.239 1.141 1.443 1.370 2008-Apr-29 20:22:38 LOG4 check_wapp_levels: WAPP-2 power levels: 1.330 1.240 1.264 1.334 2008-Apr-29 20:22:38 LOG4 check_wapp_levels: WAPP-3 power levels: 1.485 1.508 1.286 1.457 2008-Apr-29 20:22:38 LOG4 check_wapp_levels: WAPP-4 power levels: 1.300 1.354 1.415 1.499 2008-Apr-29 20:22:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.112626 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-29 20:22:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.112626 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 20:22:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.112626 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 20:22:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.112626 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 20:22:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.112626 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 20:22:39 LOG3 WAPP=1+3+4-save_rfcalc: Channel 5: Sky freq = 1381.112626 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 20:22:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.112626 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 20:22:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.112626 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 20:22:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.112626 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 20:22:39 LOG3 WAPP=2-save_rfcalc: Channel 5: Sky freq = 1381.112626 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 20:22:39 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-29 20:22:39 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-29 20:22:39 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-29 20:22:39 LOG5 end_task: Level: (5) ID = <10267> Status = 0 0 0 0 ok 2008-Apr-29 20:22:39 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-29 20:22:39 LOG5 end_task: Level: (4) ID = <10266> Status = 0 0 0 0 ok 2008-Apr-29 20:22:39 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-29 20:22:39 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-29 20:22:39 LOG5 finish_task: Level: (3) ID = <10257> Status = 0 0 0 0 ok 2008-Apr-29 20:22:39 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-29 20:22:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 20:22:39 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-29 20:22:39 LOG5 end_task: Level: (3) ID = <10257> Status = 0 0 0 0 ok 2008-Apr-29 20:22:40 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-29 20:22:40 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 123.63 and ZA = 9.91 2008-Apr-29 20:22:40 LOG3 track_source: Calling 'track_source AGES3193_p1_010 123.63 9.9115003437 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-29 20:22:40 START begin_task: Starting task 'sending tracking commands' 2008-Apr-29 20:22:40 LOG5 begin_task: Level: (3) ID = <10268> Status = 0 0 0 0 ok 2008-Apr-29 20:22:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p1_010} INFO {Slewing to source 'AGES3193_p1_010' ...} 2008-Apr-29 20:22:40 INFO1 track_source: Starting to track AGES3193_p1_010 2008-Apr-29 20:22:40 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p1_010" 2008-Apr-29 20:22:40 LOG3 vw_send: To DATATAKING: set ra 123.63 2008-Apr-29 20:22:40 LOG3 vw_send: To DATATAKING: set dec 9.9115003437 2008-Apr-29 20:22:40 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-29 20:22:40 LOG3 vw_send: To DATATAKING: pnt tr 123.63 9.9115003437 -CF 2008-Apr-29 20:22:40 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-29 20:22:40 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-29 20:22:40 LOG5 finish_task: Level: (3) ID = <10268> Status = 0 0 0 0 ok 2008-Apr-29 20:22:40 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-29 20:22:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 20:22:40 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-29 20:22:40 LOG5 end_task: Level: (3) ID = <10268> Status = 0 0 0 0 ok 2008-Apr-29 20:22:40 LOG1 fixed_driftmap: Parameters: HA = +00:35:59.8 Start = 10:29:29.2 LST = 10:28:55.3 diff = 33.8 secs 2008-Apr-29 20:22:40 INFO2 fixed_driftmap: Waiting 31.8 seconds for RA 9:53:29 2008-Apr-29 20:22:40 INFO2 lstwait: Waiting for 31.7 secs from LST 10:28:55 to LST 10:29:27 ... 2008-Apr-29 20:22:40 LOG4 send_obs_status: To obs_status: <1> TASKTIME 31.749537439458045 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-29 20:22:40 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-29 20:22:40 LOG5 begin_task: Level: (3) ID = <10269> Status = 0 0 0 0 ok 2008-Apr-29 20:22:40 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p1_010" 2008-Apr-29 20:22:40 LOG4 got_cormsg: From DATATAKING: set ra 123.63 2008-Apr-29 20:22:40 LOG4 got_cormsg: From DATATAKING: set dec 9.9115003437 2008-Apr-29 20:22:40 LOG4 got_cormsg: From DATATAKING: vw% 123.63 2008-Apr-29 20:22:40 LOG4 got_cormsg: From DATATAKING: vw% 9.9115003437 2008-Apr-29 20:22:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 20:22:40 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-29 20:22:40 LOG4 got_cormsg: From DATATAKING: pnt tr 123.63 9.9115003437 -CF 2008-Apr-29 20:22:40 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-29 20:22:40 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-29 20:22:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 20:22:44 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.894 and 1.086 2008-Apr-29 20:23:12 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-29 20:23:12 LOG5 end_task: Level: (3) ID = <10269> Status = 0 0 0 0 ok 2008-Apr-29 20:23:12 LOG4 lstwait: Finished waiting, the gui caused difference: 0.25033627999988539 2008-Apr-29 20:23:12 INFO3 lstwait: Finished waiting 2008-Apr-29 20:23:12 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-29 20:23:12 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-29 20:23:12 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-29 20:23:12 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-29 20:23:12 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-29 20:23:12 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-29 20:23:12 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-29 20:23:12 LOG5 begin_task: Level: (3) ID = <10270> Status = 0 0 0 0 ok 2008-Apr-29 20:23:12 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-29 20:23:12 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-29 20:23:12 INFO2 take_spectra: Starting WAPP scan: 812000126 2008-Apr-29 20:23:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-29 20:23:12 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-29 20:23:12 LOG5 begin_task: Level: (4) ID = <10271> Status = 0 0 0 0 ok 2008-Apr-29 20:23:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-29 20:23:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1393.00 2008-Apr-29 20:23:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.112626 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-29 20:23:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.112626 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 20:23:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.112626 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 20:23:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.112626 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 20:23:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.112626 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 20:23:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.112626 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 20:23:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.112626 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 20:23:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.112626 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 20:23:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.112626 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 20:25:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (6.434 > 1.4)! 2008-Apr-29 20:25:56 LOG4 check_wapp_levels: WAPP-1 power levels: 0.897 6.434 1.076 1.020 2008-Apr-29 20:25:56 LOG4 check_wapp_levels: WAPP-2 power levels: 0.989 0.906 0.916 0.968 2008-Apr-29 20:25:56 LOG4 check_wapp_levels: WAPP-3 power levels: 1.061 1.077 0.920 1.083 2008-Apr-29 20:25:56 LOG4 check_wapp_levels: WAPP-4 power levels: 0.915 0.968 0.996 1.072 2008-Apr-29 20:25:58 INFO5 check_wapp_levels: WAPP power levels are between 0.893 and 6.427 (still bad) 2008-Apr-29 20:26:00 INFO5 check_wapp_levels: WAPP power levels are between 0.894 and 6.428 (still bad) 2008-Apr-29 20:26:02 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 6.447 (still bad) 2008-Apr-29 20:26:04 INFO5 check_wapp_levels: WAPP power levels are between 0.894 and 6.444 (still bad) 2008-Apr-29 20:26:06 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 6.460 (still bad) 2008-Apr-29 20:26:08 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 6.475 (still bad) 2008-Apr-29 20:26:10 INFO5 check_wapp_levels: WAPP power levels are between 0.901 and 6.484 (still bad) 2008-Apr-29 20:26:12 INFO5 check_wapp_levels: WAPP power levels are between 0.901 and 6.487 (still bad) 2008-Apr-29 20:26:14 INFO5 check_wapp_levels: WAPP power levels are between 0.900 and 6.493 (still bad) 2008-Apr-29 20:26:16 INFO5 check_wapp_levels: WAPP power levels are between 0.899 and 6.498 (still bad) 2008-Apr-29 20:26:18 INFO5 check_wapp_levels: WAPP power levels are between 0.899 and 6.477 (still bad) 2008-Apr-29 20:26:20 INFO5 check_wapp_levels: WAPP power levels are between 0.901 and 6.462 (still bad) 2008-Apr-29 20:26:22 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 6.469 (still bad) 2008-Apr-29 20:26:24 INFO5 check_wapp_levels: WAPP power levels are between 0.898 and 6.454 (still bad) 2008-Apr-29 20:26:27 INFO5 check_wapp_levels: WAPP power levels are between 0.898 and 6.453 (still bad) 2008-Apr-29 20:26:29 INFO5 check_wapp_levels: WAPP power levels are between 0.893 and 6.438 (still bad) 2008-Apr-29 20:26:31 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 6.435 (still bad) 2008-Apr-29 20:26:33 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 6.427 (still bad) 2008-Apr-29 20:26:35 INFO5 check_wapp_levels: WAPP power levels are between 0.898 and 6.440 (still bad) 2008-Apr-29 20:26:37 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 6.436 (still bad) 2008-Apr-29 20:26:39 INFO5 check_wapp_levels: WAPP power levels are between 0.893 and 6.443 (still bad) 2008-Apr-29 20:26:41 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 6.441 (still bad) 2008-Apr-29 20:26:43 INFO5 check_wapp_levels: WAPP power levels are between 0.898 and 6.453 (still bad) 2008-Apr-29 20:26:45 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 6.460 (still bad) 2008-Apr-29 20:26:47 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 6.461 (still bad) 2008-Apr-29 20:26:49 INFO5 check_wapp_levels: WAPP power levels are between 0.901 and 6.458 (still bad) 2008-Apr-29 20:26:51 INFO5 check_wapp_levels: WAPP power levels are between 0.900 and 6.471 (still bad) 2008-Apr-29 20:26:53 INFO5 check_wapp_levels: WAPP power levels are between 0.898 and 6.481 (still bad) 2008-Apr-29 20:26:55 INFO5 check_wapp_levels: WAPP power levels are between 0.898 and 6.460 (still bad) 2008-Apr-29 20:26:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (6.469 > 1.4)! 2008-Apr-29 20:26:57 LOG4 check_wapp_levels: WAPP-1 power levels: 0.897 6.469 1.059 1.003 2008-Apr-29 20:26:57 LOG4 check_wapp_levels: WAPP-2 power levels: 0.985 0.901 0.916 0.967 2008-Apr-29 20:26:57 LOG4 check_wapp_levels: WAPP-3 power levels: 1.062 1.077 0.920 1.087 2008-Apr-29 20:26:57 LOG4 check_wapp_levels: WAPP-4 power levels: 0.920 0.971 1.000 1.075 2008-Apr-29 20:26:59 INFO5 check_wapp_levels: WAPP power levels are between 0.900 and 6.470 (still bad) 2008-Apr-29 20:27:01 INFO5 check_wapp_levels: WAPP power levels are between 0.900 and 6.451 (still bad) 2008-Apr-29 20:27:03 INFO5 check_wapp_levels: WAPP power levels are between 0.900 and 6.442 (still bad) 2008-Apr-29 20:27:05 INFO5 check_wapp_levels: WAPP power levels are between 0.899 and 6.440 (still bad) 2008-Apr-29 20:27:07 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 6.429 (still bad) 2008-Apr-29 20:27:09 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 6.438 (still bad) 2008-Apr-29 20:27:11 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 6.427 (still bad) 2008-Apr-29 20:27:13 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 6.433 (still bad) 2008-Apr-29 20:27:15 INFO5 check_wapp_levels: WAPP power levels are between 0.899 and 6.436 (still bad) 2008-Apr-29 20:27:17 INFO5 check_wapp_levels: WAPP power levels are between 0.894 and 6.430 (still bad) 2008-Apr-29 20:27:19 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 6.431 (still bad) 2008-Apr-29 20:27:21 INFO5 check_wapp_levels: WAPP power levels are between 0.900 and 6.434 (still bad) 2008-Apr-29 20:27:23 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 6.441 (still bad) 2008-Apr-29 20:27:25 INFO5 check_wapp_levels: WAPP power levels are between 0.898 and 6.442 (still bad) 2008-Apr-29 20:27:27 INFO5 check_wapp_levels: WAPP power levels are between 0.893 and 6.439 (still bad) 2008-Apr-29 20:27:29 INFO5 check_wapp_levels: WAPP power levels are between 0.894 and 6.427 (still bad) 2008-Apr-29 20:27:31 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 6.440 (still bad) 2008-Apr-29 20:27:33 INFO5 check_wapp_levels: WAPP power levels are between 0.898 and 6.445 (still bad) 2008-Apr-29 20:27:35 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 6.443 (still bad) 2008-Apr-29 20:27:37 INFO5 check_wapp_levels: WAPP power levels are between 0.899 and 6.432 (still bad) 2008-Apr-29 20:27:39 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 6.429 (still bad) 2008-Apr-29 20:27:41 INFO5 check_wapp_levels: WAPP power levels are between 0.898 and 6.429 (still bad) 2008-Apr-29 20:27:43 INFO5 check_wapp_levels: WAPP power levels are between 0.898 and 6.433 (still bad) 2008-Apr-29 20:27:45 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 6.425 (still bad) 2008-Apr-29 20:27:48 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 6.420 (still bad) 2008-Apr-29 20:27:50 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 6.437 (still bad) 2008-Apr-29 20:27:52 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 6.437 (still bad) 2008-Apr-29 20:27:54 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 6.432 (still bad) 2008-Apr-29 20:27:56 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 6.427 (still bad) 2008-Apr-29 20:27:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (6.428 > 1.4)! 2008-Apr-29 20:27:58 LOG4 check_wapp_levels: WAPP-1 power levels: 0.896 6.428 1.060 1.005 2008-Apr-29 20:27:58 LOG4 check_wapp_levels: WAPP-2 power levels: 0.987 0.901 0.917 0.968 2008-Apr-29 20:27:58 LOG4 check_wapp_levels: WAPP-3 power levels: 1.057 1.076 0.919 1.083 2008-Apr-29 20:27:58 LOG4 check_wapp_levels: WAPP-4 power levels: 0.915 0.968 0.996 1.073 2008-Apr-29 20:28:00 INFO5 check_wapp_levels: WAPP power levels are between 0.898 and 6.431 (still bad) 2008-Apr-29 20:28:02 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 6.436 (still bad) 2008-Apr-29 20:28:04 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 6.430 (still bad) 2008-Apr-29 20:28:06 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 6.421 (still bad) 2008-Apr-29 20:28:08 INFO5 check_wapp_levels: WAPP power levels are between 0.893 and 6.445 (still bad) 2008-Apr-29 20:28:10 INFO5 check_wapp_levels: WAPP power levels are between 0.894 and 6.433 (still bad) 2008-Apr-29 20:28:12 INFO5 check_wapp_levels: WAPP power levels are between 0.894 and 6.427 (still bad) 2008-Apr-29 20:28:14 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 6.429 (still bad) 2008-Apr-29 20:28:16 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 6.436 (still bad) 2008-Apr-29 20:28:18 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 6.439 (still bad) 2008-Apr-29 20:28:20 INFO5 check_wapp_levels: WAPP power levels are between 0.894 and 6.439 (still bad) 2008-Apr-29 20:28:22 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 6.439 (still bad) 2008-Apr-29 20:28:24 INFO5 check_wapp_levels: WAPP power levels are between 0.892 and 6.435 (still bad) 2008-Apr-29 20:28:26 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 6.434 (still bad) 2008-Apr-29 20:28:28 INFO5 check_wapp_levels: WAPP power levels are between 0.898 and 6.435 (still bad) 2008-Apr-29 20:28:30 INFO5 check_wapp_levels: WAPP power levels are between 0.892 and 6.443 (still bad) 2008-Apr-29 20:28:32 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 6.432 (still bad) 2008-Apr-29 20:28:34 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 6.441 (still bad) 2008-Apr-29 20:28:36 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 6.446 (still bad) 2008-Apr-29 20:28:38 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 6.436 (still bad) 2008-Apr-29 20:28:40 INFO5 check_wapp_levels: WAPP power levels are between 0.898 and 6.442 (still bad) 2008-Apr-29 20:28:42 INFO5 check_wapp_levels: WAPP power levels are between 0.891 and 6.438 (still bad) 2008-Apr-29 20:28:44 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 6.441 (still bad) 2008-Apr-29 20:28:46 INFO5 check_wapp_levels: WAPP power levels are between 0.898 and 6.439 (still bad) 2008-Apr-29 20:28:48 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 6.442 (still bad) 2008-Apr-29 20:28:50 INFO5 check_wapp_levels: WAPP power levels are between 0.894 and 6.430 (still bad) 2008-Apr-29 20:28:52 INFO5 check_wapp_levels: WAPP power levels are between 0.893 and 6.436 (still bad) 2008-Apr-29 20:28:54 INFO5 check_wapp_levels: WAPP power levels are between 0.892 and 6.433 (still bad) 2008-Apr-29 20:28:56 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 6.425 (still bad) 2008-Apr-29 20:28:58 INFO5 check_wapp_levels: WAPP power levels are between 0.898 and 6.424 (still bad) 2008-Apr-29 20:29:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (6.441 > 1.4)! 2008-Apr-29 20:29:00 LOG4 check_wapp_levels: WAPP-1 power levels: 0.892 6.441 1.062 1.003 2008-Apr-29 20:29:00 LOG4 check_wapp_levels: WAPP-2 power levels: 0.983 0.900 0.916 0.967 2008-Apr-29 20:29:00 LOG4 check_wapp_levels: WAPP-3 power levels: 1.059 1.074 0.917 1.083 2008-Apr-29 20:29:00 LOG4 check_wapp_levels: WAPP-4 power levels: 0.916 0.969 0.996 1.072 2008-Apr-29 20:29:02 INFO5 check_wapp_levels: WAPP power levels are between 0.893 and 6.419 (still bad) 2008-Apr-29 20:29:04 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 6.423 (still bad) 2008-Apr-29 20:29:06 INFO5 check_wapp_levels: WAPP power levels are between 0.893 and 6.432 (still bad) 2008-Apr-29 20:29:08 INFO5 check_wapp_levels: WAPP power levels are between 0.892 and 6.417 (still bad) 2008-Apr-29 20:29:10 INFO5 check_wapp_levels: WAPP power levels are between 0.893 and 6.415 (still bad) 2008-Apr-29 20:29:12 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 6.427 (still bad) 2008-Apr-29 20:29:15 INFO5 check_wapp_levels: WAPP power levels are between 0.894 and 6.429 (still bad) 2008-Apr-29 20:29:17 INFO5 check_wapp_levels: WAPP power levels are between 0.892 and 6.427 (still bad) 2008-Apr-29 20:29:19 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 6.435 (still bad) 2008-Apr-29 20:29:21 INFO5 check_wapp_levels: WAPP power levels are between 0.893 and 6.433 (still bad) 2008-Apr-29 20:29:23 INFO5 check_wapp_levels: WAPP power levels are between 0.893 and 6.419 (still bad) 2008-Apr-29 20:29:25 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 6.421 (still bad) 2008-Apr-29 20:29:27 INFO5 check_wapp_levels: WAPP power levels are between 0.894 and 6.428 (still bad) 2008-Apr-29 20:29:29 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 6.424 (still bad) 2008-Apr-29 20:29:31 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 6.413 (still bad) 2008-Apr-29 20:29:33 INFO5 check_wapp_levels: WAPP power levels are between 0.892 and 6.416 (still bad) 2008-Apr-29 20:29:35 INFO5 check_wapp_levels: WAPP power levels are between 0.892 and 6.425 (still bad) 2008-Apr-29 20:29:37 INFO5 check_wapp_levels: WAPP power levels are between 0.892 and 6.418 (still bad) 2008-Apr-29 20:29:39 INFO5 check_wapp_levels: WAPP power levels are between 0.892 and 6.415 (still bad) 2008-Apr-29 20:29:41 INFO5 check_wapp_levels: WAPP power levels are between 0.893 and 6.417 (still bad) 2008-Apr-29 20:29:43 INFO5 check_wapp_levels: WAPP power levels are between 0.893 and 6.423 (still bad) 2008-Apr-29 20:29:45 INFO5 check_wapp_levels: WAPP power levels are between 0.893 and 6.418 (still bad) 2008-Apr-29 20:29:47 INFO5 check_wapp_levels: WAPP power levels are between 0.892 and 6.423 (still bad) 2008-Apr-29 20:29:49 INFO5 check_wapp_levels: WAPP power levels are between 0.892 and 6.417 (still bad) 2008-Apr-29 20:29:51 INFO5 check_wapp_levels: WAPP power levels are between 0.891 and 6.423 (still bad) 2008-Apr-29 20:29:53 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 6.433 (still bad) 2008-Apr-29 20:29:55 INFO5 check_wapp_levels: WAPP power levels are between 0.891 and 6.434 (still bad) 2008-Apr-29 20:29:57 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 6.432 (still bad) 2008-Apr-29 20:29:59 INFO5 check_wapp_levels: WAPP power levels are between 0.894 and 6.417 (still bad) 2008-Apr-29 20:30:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (6.408 > 1.4)! 2008-Apr-29 20:30:01 LOG4 check_wapp_levels: WAPP-1 power levels: 0.894 6.408 1.061 1.001 2008-Apr-29 20:30:01 LOG4 check_wapp_levels: WAPP-2 power levels: 0.988 0.900 0.915 0.966 2008-Apr-29 20:30:01 LOG4 check_wapp_levels: WAPP-3 power levels: 1.057 1.072 0.919 1.083 2008-Apr-29 20:30:01 LOG4 check_wapp_levels: WAPP-4 power levels: 0.915 0.968 0.996 1.073 2008-Apr-29 20:30:03 INFO5 check_wapp_levels: WAPP power levels are between 0.889 and 6.422 (still bad) 2008-Apr-29 20:30:05 INFO5 check_wapp_levels: WAPP power levels are between 0.892 and 6.427 (still bad) 2008-Apr-29 20:30:07 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 6.420 (still bad) 2008-Apr-29 20:30:09 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 6.403 (still bad) 2008-Apr-29 20:30:11 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 6.429 (still bad) 2008-Apr-29 20:30:13 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 6.419 (still bad) 2008-Apr-29 20:30:15 INFO5 check_wapp_levels: WAPP power levels are between 0.891 and 6.423 (still bad) 2008-Apr-29 20:30:17 INFO5 check_wapp_levels: WAPP power levels are between 0.894 and 6.427 (still bad) 2008-Apr-29 20:30:19 INFO5 check_wapp_levels: WAPP power levels are between 0.892 and 6.421 (still bad) 2008-Apr-29 20:30:21 INFO5 check_wapp_levels: WAPP power levels are between 0.893 and 6.426 (still bad) 2008-Apr-29 20:30:23 INFO5 check_wapp_levels: WAPP power levels are between 0.892 and 6.421 (still bad) 2008-Apr-29 20:30:25 INFO5 check_wapp_levels: WAPP power levels are between 0.893 and 6.426 (still bad) 2008-Apr-29 20:30:27 INFO5 check_wapp_levels: WAPP power levels are between 0.894 and 6.411 (still bad) 2008-Apr-29 20:30:29 INFO5 check_wapp_levels: WAPP power levels are between 0.893 and 6.424 (still bad) 2008-Apr-29 20:30:31 INFO5 check_wapp_levels: WAPP power levels are between 0.890 and 6.410 (still bad) 2008-Apr-29 20:30:33 INFO5 check_wapp_levels: WAPP power levels are between 0.894 and 6.410 (still bad) 2008-Apr-29 20:30:35 INFO5 check_wapp_levels: WAPP power levels are between 0.898 and 6.422 (still bad) 2008-Apr-29 20:30:37 INFO5 check_wapp_levels: WAPP power levels are between 0.894 and 6.425 (still bad) 2008-Apr-29 20:30:40 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 6.427 (still bad) 2008-Apr-29 20:30:42 INFO5 check_wapp_levels: WAPP power levels are between 0.890 and 6.427 (still bad) 2008-Apr-29 20:30:44 INFO5 check_wapp_levels: WAPP power levels are between 0.891 and 6.421 (still bad) 2008-Apr-29 20:30:46 INFO5 check_wapp_levels: WAPP power levels are between 0.890 and 6.408 (still bad) 2008-Apr-29 20:30:48 INFO5 check_wapp_levels: WAPP power levels are between 0.894 and 6.426 (still bad) 2008-Apr-29 20:30:50 INFO5 check_wapp_levels: WAPP power levels are between 0.899 and 6.456 (still bad) 2008-Apr-29 20:30:52 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 6.500 (still bad) 2008-Apr-29 20:30:54 INFO5 check_wapp_levels: WAPP power levels are between 0.902 and 6.554 (still bad) 2008-Apr-29 20:30:56 INFO5 check_wapp_levels: WAPP power levels are between 0.901 and 6.627 (still bad) 2008-Apr-29 20:30:58 INFO5 check_wapp_levels: WAPP power levels are between 0.901 and 6.669 (still bad) 2008-Apr-29 20:31:00 INFO5 check_wapp_levels: WAPP power levels are between 0.902 and 6.708 (still bad) 2008-Apr-29 20:31:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (6.735 > 1.4)! 2008-Apr-29 20:31:02 LOG4 check_wapp_levels: WAPP-1 power levels: 0.942 6.735 1.061 1.003 2008-Apr-29 20:31:02 LOG4 check_wapp_levels: WAPP-2 power levels: 0.989 0.902 0.916 0.969 2008-Apr-29 20:31:02 LOG4 check_wapp_levels: WAPP-3 power levels: 1.059 1.076 0.919 1.083 2008-Apr-29 20:31:02 LOG4 check_wapp_levels: WAPP-4 power levels: 0.917 0.969 0.997 1.073 2008-Apr-29 20:31:04 INFO5 check_wapp_levels: WAPP power levels are between 0.902 and 6.722 (still bad) 2008-Apr-29 20:31:06 INFO5 check_wapp_levels: WAPP power levels are between 0.903 and 6.667 (still bad) 2008-Apr-29 20:31:08 INFO5 check_wapp_levels: WAPP power levels are between 0.902 and 6.613 (still bad) 2008-Apr-29 20:31:10 INFO5 check_wapp_levels: WAPP power levels are between 0.901 and 6.562 (still bad) 2008-Apr-29 20:31:12 INFO5 check_wapp_levels: WAPP power levels are between 0.901 and 6.498 (still bad) 2008-Apr-29 20:31:14 INFO5 check_wapp_levels: WAPP power levels are between 0.899 and 6.456 (still bad) 2008-Apr-29 20:31:16 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 6.431 (still bad) 2008-Apr-29 20:31:18 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 6.417 (still bad) 2008-Apr-29 20:31:20 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 6.424 (still bad) 2008-Apr-29 20:31:22 INFO5 check_wapp_levels: WAPP power levels are between 0.894 and 6.437 (still bad) 2008-Apr-29 20:31:24 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 6.434 (still bad) 2008-Apr-29 20:31:26 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 6.437 (still bad) 2008-Apr-29 20:31:28 INFO5 check_wapp_levels: WAPP power levels are between 0.894 and 6.442 (still bad) 2008-Apr-29 20:31:30 INFO5 check_wapp_levels: WAPP power levels are between 0.894 and 6.434 (still bad) 2008-Apr-29 20:31:32 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 6.432 (still bad) 2008-Apr-29 20:31:34 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 6.419 (still bad) 2008-Apr-29 20:31:36 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 6.424 (still bad) 2008-Apr-29 20:31:38 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 6.421 (still bad) 2008-Apr-29 20:31:40 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 6.420 (still bad) 2008-Apr-29 20:31:42 INFO5 check_wapp_levels: WAPP power levels are between 0.898 and 6.428 (still bad) 2008-Apr-29 20:31:44 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 6.447 (still bad) 2008-Apr-29 20:31:46 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 6.451 (still bad) 2008-Apr-29 20:31:48 INFO5 check_wapp_levels: WAPP power levels are between 0.901 and 6.455 (still bad) 2008-Apr-29 20:31:50 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 6.445 (still bad) 2008-Apr-29 20:31:52 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 6.448 (still bad) 2008-Apr-29 20:31:54 INFO5 check_wapp_levels: WAPP power levels are between 0.900 and 6.456 (still bad) 2008-Apr-29 20:31:56 INFO5 check_wapp_levels: WAPP power levels are between 0.898 and 6.446 (still bad) 2008-Apr-29 20:31:58 INFO5 check_wapp_levels: WAPP power levels are between 0.898 and 6.431 (still bad) 2008-Apr-29 20:32:00 INFO5 check_wapp_levels: WAPP power levels are between 0.898 and 6.425 (still bad) 2008-Apr-29 20:32:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (6.421 > 1.4)! 2008-Apr-29 20:32:03 LOG4 check_wapp_levels: WAPP-1 power levels: 0.893 6.421 1.059 1.001 2008-Apr-29 20:32:03 LOG4 check_wapp_levels: WAPP-2 power levels: 0.990 0.901 0.916 0.970 2008-Apr-29 20:32:03 LOG4 check_wapp_levels: WAPP-3 power levels: 1.062 1.078 0.923 1.087 2008-Apr-29 20:32:03 LOG4 check_wapp_levels: WAPP-4 power levels: 0.920 0.968 0.999 1.073 2008-Apr-29 20:32:05 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 6.426 (still bad) 2008-Apr-29 20:32:07 INFO5 check_wapp_levels: WAPP power levels are between 0.893 and 6.426 (still bad) 2008-Apr-29 20:32:09 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 6.423 (still bad) 2008-Apr-29 20:32:11 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 6.437 (still bad) 2008-Apr-29 20:32:13 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 6.432 (still bad) 2008-Apr-29 20:32:15 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 6.433 (still bad) 2008-Apr-29 20:32:17 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 6.450 (still bad) 2008-Apr-29 20:32:19 INFO5 check_wapp_levels: WAPP power levels are between 0.891 and 6.427 (still bad) 2008-Apr-29 20:32:21 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 6.431 (still bad) 2008-Apr-29 20:32:23 INFO5 check_wapp_levels: WAPP power levels are between 0.894 and 6.431 (still bad) 2008-Apr-29 20:32:25 INFO5 check_wapp_levels: WAPP power levels are between 0.893 and 6.423 (still bad) 2008-Apr-29 20:32:27 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 6.423 (still bad) 2008-Apr-29 20:32:29 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 6.427 (still bad) 2008-Apr-29 20:32:31 INFO5 check_wapp_levels: WAPP power levels are between 0.899 and 6.423 (still bad) 2008-Apr-29 20:32:33 INFO5 check_wapp_levels: WAPP power levels are between 0.893 and 6.417 (still bad) 2008-Apr-29 20:32:35 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 6.435 (still bad) 2008-Apr-29 20:32:37 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 6.420 (still bad) 2008-Apr-29 20:32:39 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 6.438 (still bad) 2008-Apr-29 20:32:41 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 6.430 (still bad) 2008-Apr-29 20:32:43 INFO5 check_wapp_levels: WAPP power levels are between 0.898 and 6.426 (still bad) 2008-Apr-29 20:32:45 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 6.435 (still bad) 2008-Apr-29 20:32:47 INFO5 check_wapp_levels: WAPP power levels are between 0.893 and 6.435 (still bad) 2008-Apr-29 20:32:49 INFO5 check_wapp_levels: WAPP power levels are between 0.892 and 6.446 (still bad) 2008-Apr-29 20:32:51 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 6.424 (still bad) 2008-Apr-29 20:32:53 INFO5 check_wapp_levels: WAPP power levels are between 0.892 and 6.434 (still bad) 2008-Apr-29 20:32:55 INFO5 check_wapp_levels: WAPP power levels are between 0.893 and 6.439 (still bad) 2008-Apr-29 20:32:57 INFO5 check_wapp_levels: WAPP power levels are between 0.898 and 6.440 (still bad) 2008-Apr-29 20:32:59 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 6.422 (still bad) 2008-Apr-29 20:33:01 INFO5 check_wapp_levels: WAPP power levels are between 0.893 and 6.414 (still bad) 2008-Apr-29 20:33:03 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 6.419 (still bad) 2008-Apr-29 20:33:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (6.411 > 1.4)! 2008-Apr-29 20:33:05 LOG4 check_wapp_levels: WAPP-1 power levels: 0.892 6.411 1.061 1.003 2008-Apr-29 20:33:05 LOG4 check_wapp_levels: WAPP-2 power levels: 0.986 0.901 0.916 0.969 2008-Apr-29 20:33:05 LOG4 check_wapp_levels: WAPP-3 power levels: 1.059 1.074 0.920 1.085 2008-Apr-29 20:33:05 LOG4 check_wapp_levels: WAPP-4 power levels: 0.917 0.971 0.998 1.075 2008-Apr-29 20:33:07 INFO5 check_wapp_levels: WAPP power levels are between 0.890 and 6.413 (still bad) 2008-Apr-29 20:33:09 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 6.420 (still bad) 2008-Apr-29 20:33:11 INFO5 check_wapp_levels: WAPP power levels are between 0.891 and 6.419 (still bad) 2008-Apr-29 20:33:13 INFO5 check_wapp_levels: WAPP power levels are between 0.893 and 6.429 (still bad) 2008-Apr-29 20:33:15 INFO5 check_wapp_levels: WAPP power levels are between 0.892 and 6.416 (still bad) 2008-Apr-29 20:33:17 INFO5 check_wapp_levels: WAPP power levels are between 0.891 and 6.411 (still bad) 2008-Apr-29 20:33:19 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 6.411 (still bad) 2008-Apr-29 20:33:21 INFO5 check_wapp_levels: WAPP power levels are between 0.890 and 6.413 (still bad) 2008-Apr-29 20:33:23 INFO5 check_wapp_levels: WAPP power levels are between 0.893 and 6.406 (still bad) 2008-Apr-29 20:33:25 INFO5 check_wapp_levels: WAPP power levels are between 0.894 and 6.427 (still bad) 2008-Apr-29 20:33:27 INFO5 check_wapp_levels: WAPP power levels are between 0.894 and 6.412 (still bad) 2008-Apr-29 20:33:29 INFO5 check_wapp_levels: WAPP power levels are between 0.890 and 6.403 (still bad) 2008-Apr-29 20:33:32 INFO5 check_wapp_levels: WAPP power levels are between 0.892 and 6.414 (still bad) 2008-Apr-29 20:33:34 INFO5 check_wapp_levels: WAPP power levels are between 0.892 and 6.411 (still bad) 2008-Apr-29 20:33:36 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 6.405 (still bad) 2008-Apr-29 20:33:38 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 6.402 (still bad) 2008-Apr-29 20:33:40 INFO5 check_wapp_levels: WAPP power levels are between 0.893 and 6.415 (still bad) 2008-Apr-29 20:33:42 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 6.402 (still bad) 2008-Apr-29 20:33:44 INFO5 check_wapp_levels: WAPP power levels are between 0.892 and 6.420 (still bad) 2008-Apr-29 20:33:46 INFO5 check_wapp_levels: WAPP power levels are between 0.894 and 6.409 (still bad) 2008-Apr-29 20:33:48 INFO5 check_wapp_levels: WAPP power levels are between 0.892 and 6.415 (still bad) 2008-Apr-29 20:33:50 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 6.423 (still bad) 2008-Apr-29 20:33:52 INFO5 check_wapp_levels: WAPP power levels are between 0.893 and 6.421 (still bad) 2008-Apr-29 20:33:54 INFO5 check_wapp_levels: WAPP power levels are between 0.892 and 6.412 (still bad) 2008-Apr-29 20:33:56 INFO5 check_wapp_levels: WAPP power levels are between 0.892 and 6.412 (still bad) 2008-Apr-29 20:33:58 INFO5 check_wapp_levels: WAPP power levels are between 0.892 and 6.396 (still bad) 2008-Apr-29 20:34:00 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 6.405 (still bad) 2008-Apr-29 20:34:02 INFO5 check_wapp_levels: WAPP power levels are between 0.891 and 6.402 (still bad) 2008-Apr-29 20:34:04 INFO5 check_wapp_levels: WAPP power levels are between 0.894 and 6.399 (still bad) 2008-Apr-29 20:34:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (6.418 > 1.4)! 2008-Apr-29 20:34:06 LOG4 check_wapp_levels: WAPP-1 power levels: 0.890 6.418 1.060 1.003 2008-Apr-29 20:34:06 LOG4 check_wapp_levels: WAPP-2 power levels: 0.988 0.899 0.918 0.968 2008-Apr-29 20:34:06 LOG4 check_wapp_levels: WAPP-3 power levels: 1.055 1.073 0.920 1.083 2008-Apr-29 20:34:06 LOG4 check_wapp_levels: WAPP-4 power levels: 0.914 0.969 0.998 1.073 2008-Apr-29 20:34:08 INFO5 check_wapp_levels: WAPP power levels are between 0.892 and 6.410 (still bad) 2008-Apr-29 20:34:10 INFO5 check_wapp_levels: WAPP power levels are between 0.892 and 6.402 (still bad) 2008-Apr-29 20:34:12 INFO5 check_wapp_levels: WAPP power levels are between 0.893 and 6.407 (still bad) 2008-Apr-29 20:34:14 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 6.400 (still bad) 2008-Apr-29 20:34:16 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 6.399 (still bad) 2008-Apr-29 20:34:18 INFO5 check_wapp_levels: WAPP power levels are between 0.892 and 6.396 (still bad) 2008-Apr-29 20:34:20 INFO5 check_wapp_levels: WAPP power levels are between 0.892 and 6.392 (still bad) 2008-Apr-29 20:34:22 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 6.409 (still bad) 2008-Apr-29 20:34:24 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 6.391 (still bad) 2008-Apr-29 20:34:26 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 6.396 (still bad) 2008-Apr-29 20:34:28 INFO5 check_wapp_levels: WAPP power levels are between 0.894 and 6.397 (still bad) 2008-Apr-29 20:34:30 INFO5 check_wapp_levels: WAPP power levels are between 0.893 and 6.391 (still bad) 2008-Apr-29 20:34:32 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 6.400 (still bad) 2008-Apr-29 20:34:34 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 6.410 (still bad) 2008-Apr-29 20:34:36 INFO5 check_wapp_levels: WAPP power levels are between 0.890 and 6.422 (still bad) 2008-Apr-29 20:34:38 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 6.419 (still bad) 2008-Apr-29 20:34:40 INFO5 check_wapp_levels: WAPP power levels are between 0.893 and 6.420 (still bad) 2008-Apr-29 20:34:42 INFO5 check_wapp_levels: WAPP power levels are between 0.898 and 6.415 (still bad) 2008-Apr-29 20:34:44 INFO5 check_wapp_levels: WAPP power levels are between 0.899 and 6.414 (still bad) 2008-Apr-29 20:34:46 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 6.423 (still bad) 2008-Apr-29 20:34:48 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 6.440 (still bad) 2008-Apr-29 20:34:50 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 6.411 (still bad) 2008-Apr-29 20:34:52 INFO5 check_wapp_levels: WAPP power levels are between 0.892 and 6.418 (still bad) 2008-Apr-29 20:34:54 INFO5 check_wapp_levels: WAPP power levels are between 0.898 and 6.421 (still bad) 2008-Apr-29 20:34:56 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 6.420 (still bad) 2008-Apr-29 20:34:59 INFO5 check_wapp_levels: WAPP power levels are between 0.894 and 6.406 (still bad) 2008-Apr-29 20:35:01 INFO5 check_wapp_levels: WAPP power levels are between 0.893 and 6.407 (still bad) 2008-Apr-29 20:35:03 INFO5 check_wapp_levels: WAPP power levels are between 0.892 and 6.407 (still bad) 2008-Apr-29 20:35:05 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 6.412 (still bad) 2008-Apr-29 20:35:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (6.408 > 1.4)! 2008-Apr-29 20:35:07 LOG4 check_wapp_levels: WAPP-1 power levels: 0.895 6.408 1.059 0.999 2008-Apr-29 20:35:07 LOG4 check_wapp_levels: WAPP-2 power levels: 0.989 0.900 0.920 0.972 2008-Apr-29 20:35:07 LOG4 check_wapp_levels: WAPP-3 power levels: 1.061 1.079 0.924 1.087 2008-Apr-29 20:35:07 LOG4 check_wapp_levels: WAPP-4 power levels: 0.915 0.969 0.998 1.073 2008-Apr-29 20:35:09 INFO5 check_wapp_levels: WAPP power levels are between 0.893 and 6.410 (still bad) 2008-Apr-29 20:35:11 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 6.403 (still bad) 2008-Apr-29 20:35:13 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 6.411 (still bad) 2008-Apr-29 20:35:15 INFO5 check_wapp_levels: WAPP power levels are between 0.894 and 6.409 (still bad) 2008-Apr-29 20:35:17 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 6.414 (still bad) 2008-Apr-29 20:35:19 INFO5 check_wapp_levels: WAPP power levels are between 0.898 and 6.396 (still bad) 2008-Apr-29 20:35:21 INFO5 check_wapp_levels: WAPP power levels are between 0.894 and 6.402 (still bad) 2008-Apr-29 20:35:23 INFO5 check_wapp_levels: WAPP power levels are between 0.891 and 6.401 (still bad) 2008-Apr-29 20:35:25 INFO5 check_wapp_levels: WAPP power levels are between 0.892 and 6.420 (still bad) 2008-Apr-29 20:35:27 INFO5 check_wapp_levels: WAPP power levels are between 0.894 and 6.419 (still bad) 2008-Apr-29 20:35:29 INFO5 check_wapp_levels: WAPP power levels are between 0.893 and 6.414 (still bad) 2008-Apr-29 20:35:31 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 6.415 (still bad) 2008-Apr-29 20:35:33 INFO5 check_wapp_levels: WAPP power levels are between 0.892 and 6.413 (still bad) 2008-Apr-29 20:35:35 INFO5 check_wapp_levels: WAPP power levels are between 0.893 and 6.415 (still bad) 2008-Apr-29 20:35:37 INFO5 check_wapp_levels: WAPP power levels are between 0.892 and 6.416 (still bad) 2008-Apr-29 20:35:39 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 6.418 (still bad) 2008-Apr-29 20:35:41 INFO5 check_wapp_levels: WAPP power levels are between 0.892 and 6.416 (still bad) 2008-Apr-29 20:35:43 INFO5 check_wapp_levels: WAPP power levels are between 0.891 and 6.395 (still bad) 2008-Apr-29 20:35:45 INFO5 check_wapp_levels: WAPP power levels are between 0.891 and 6.412 (still bad) 2008-Apr-29 20:35:47 INFO5 check_wapp_levels: WAPP power levels are between 0.891 and 6.411 (still bad) 2008-Apr-29 20:35:49 INFO5 check_wapp_levels: WAPP power levels are between 0.891 and 6.404 (still bad) 2008-Apr-29 20:35:51 INFO5 check_wapp_levels: WAPP power levels are between 0.892 and 6.389 (still bad) 2008-Apr-29 20:35:53 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 6.403 (still bad) 2008-Apr-29 20:35:55 INFO5 check_wapp_levels: WAPP power levels are between 0.893 and 6.396 (still bad) 2008-Apr-29 20:35:57 INFO5 check_wapp_levels: WAPP power levels are between 0.894 and 6.393 (still bad) 2008-Apr-29 20:35:59 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 6.398 (still bad) 2008-Apr-29 20:36:01 INFO5 check_wapp_levels: WAPP power levels are between 0.892 and 6.413 (still bad) 2008-Apr-29 20:36:03 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 6.408 (still bad) 2008-Apr-29 20:36:05 INFO5 check_wapp_levels: WAPP power levels are between 0.900 and 6.412 (still bad) 2008-Apr-29 20:36:07 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 6.421 (still bad) 2008-Apr-29 20:36:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (6.421 > 1.4)! 2008-Apr-29 20:36:09 LOG4 check_wapp_levels: WAPP-1 power levels: 0.898 6.421 1.062 1.002 2008-Apr-29 20:36:09 LOG4 check_wapp_levels: WAPP-2 power levels: 0.993 0.903 0.918 0.970 2008-Apr-29 20:36:09 LOG4 check_wapp_levels: WAPP-3 power levels: 1.061 1.081 0.924 1.087 2008-Apr-29 20:36:09 LOG4 check_wapp_levels: WAPP-4 power levels: 0.920 0.970 1.002 1.075 2008-Apr-29 20:36:11 INFO5 check_wapp_levels: WAPP power levels are between 0.893 and 6.430 (still bad) 2008-Apr-29 20:36:13 INFO5 check_wapp_levels: WAPP power levels are between 0.894 and 6.427 (still bad) 2008-Apr-29 20:36:15 INFO5 check_wapp_levels: WAPP power levels are between 0.894 and 6.423 (still bad) 2008-Apr-29 20:36:17 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 6.432 (still bad) 2008-Apr-29 20:36:19 INFO5 check_wapp_levels: WAPP power levels are between 0.893 and 6.436 (still bad) 2008-Apr-29 20:36:21 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 6.408 (still bad) 2008-Apr-29 20:36:24 INFO5 check_wapp_levels: WAPP power levels are between 0.898 and 6.407 (still bad) 2008-Apr-29 20:36:26 INFO5 check_wapp_levels: WAPP power levels are between 0.894 and 6.411 (still bad) 2008-Apr-29 20:36:28 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 6.420 (still bad) 2008-Apr-29 20:36:30 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 6.408 (still bad) 2008-Apr-29 20:36:32 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 6.413 (still bad) 2008-Apr-29 20:36:34 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 6.437 (still bad) 2008-Apr-29 20:36:36 INFO5 check_wapp_levels: WAPP power levels are between 0.899 and 6.422 (still bad) 2008-Apr-29 20:36:38 INFO5 check_wapp_levels: WAPP power levels are between 0.898 and 6.401 (still bad) 2008-Apr-29 20:36:40 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 6.434 (still bad) 2008-Apr-29 20:36:42 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 6.412 (still bad) 2008-Apr-29 20:36:44 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 6.418 (still bad) 2008-Apr-29 20:36:46 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 6.427 (still bad) 2008-Apr-29 20:36:48 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 6.426 (still bad) 2008-Apr-29 20:36:50 INFO5 check_wapp_levels: WAPP power levels are between 0.899 and 6.421 (still bad) 2008-Apr-29 20:36:52 INFO5 check_wapp_levels: WAPP power levels are between 0.900 and 6.417 (still bad) 2008-Apr-29 20:36:54 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 6.406 (still bad) 2008-Apr-29 20:36:56 INFO5 check_wapp_levels: WAPP power levels are between 0.893 and 6.408 (still bad) 2008-Apr-29 20:36:58 INFO5 check_wapp_levels: WAPP power levels are between 0.894 and 6.408 (still bad) 2008-Apr-29 20:37:00 INFO5 check_wapp_levels: WAPP power levels are between 0.898 and 6.406 (still bad) 2008-Apr-29 20:37:02 INFO5 check_wapp_levels: WAPP power levels are between 0.894 and 6.417 (still bad) 2008-Apr-29 20:37:04 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 6.410 (still bad) 2008-Apr-29 20:37:06 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 6.405 (still bad) 2008-Apr-29 20:37:08 INFO5 check_wapp_levels: WAPP power levels are between 0.894 and 6.413 (still bad) 2008-Apr-29 20:37:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (6.391 > 1.4)! 2008-Apr-29 20:37:10 LOG4 check_wapp_levels: WAPP-1 power levels: 0.895 6.391 1.061 1.001 2008-Apr-29 20:37:10 LOG4 check_wapp_levels: WAPP-2 power levels: 0.994 0.906 0.915 0.968 2008-Apr-29 20:37:10 LOG4 check_wapp_levels: WAPP-3 power levels: 1.062 1.080 0.921 1.086 2008-Apr-29 20:37:10 LOG4 check_wapp_levels: WAPP-4 power levels: 0.921 0.972 1.002 1.077 2008-Apr-29 20:37:12 INFO5 check_wapp_levels: WAPP power levels are between 0.894 and 6.402 (still bad) 2008-Apr-29 20:37:14 INFO5 check_wapp_levels: WAPP power levels are between 0.893 and 6.416 (still bad) 2008-Apr-29 20:37:16 INFO5 check_wapp_levels: WAPP power levels are between 0.893 and 6.408 (still bad) 2008-Apr-29 20:37:18 INFO5 check_wapp_levels: WAPP power levels are between 0.894 and 6.420 (still bad) 2008-Apr-29 20:37:20 INFO5 check_wapp_levels: WAPP power levels are between 0.894 and 6.415 (still bad) 2008-Apr-29 20:37:22 INFO5 check_wapp_levels: WAPP power levels are between 0.894 and 6.419 (still bad) 2008-Apr-29 20:37:24 INFO5 check_wapp_levels: WAPP power levels are between 0.899 and 6.416 (still bad) 2008-Apr-29 20:37:26 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 6.423 (still bad) 2008-Apr-29 20:37:28 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 6.433 (still bad) 2008-Apr-29 20:37:30 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 6.416 (still bad) 2008-Apr-29 20:37:32 INFO5 check_wapp_levels: WAPP power levels are between 0.894 and 6.430 (still bad) 2008-Apr-29 20:37:34 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 6.408 (still bad) 2008-Apr-29 20:37:36 INFO5 check_wapp_levels: WAPP power levels are between 0.893 and 6.406 (still bad) 2008-Apr-29 20:37:38 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 6.412 (still bad) 2008-Apr-29 20:37:40 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 6.415 (still bad) 2008-Apr-29 20:37:42 INFO5 check_wapp_levels: WAPP power levels are between 0.894 and 6.416 (still bad) 2008-Apr-29 20:37:44 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 6.424 (still bad) 2008-Apr-29 20:37:47 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 6.430 (still bad) 2008-Apr-29 20:37:49 INFO5 check_wapp_levels: WAPP power levels are between 0.898 and 6.419 (still bad) 2008-Apr-29 20:37:51 INFO5 check_wapp_levels: WAPP power levels are between 0.898 and 6.426 (still bad) 2008-Apr-29 20:37:53 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 6.426 (still bad) 2008-Apr-29 20:37:55 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 6.399 (still bad) 2008-Apr-29 20:37:57 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 6.395 (still bad) 2008-Apr-29 20:37:59 INFO5 check_wapp_levels: WAPP power levels are between 0.894 and 6.419 (still bad) 2008-Apr-29 20:38:01 INFO5 check_wapp_levels: WAPP power levels are between 0.898 and 6.424 (still bad) 2008-Apr-29 20:38:03 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 6.410 (still bad) 2008-Apr-29 20:38:05 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 6.404 (still bad) 2008-Apr-29 20:38:07 INFO5 check_wapp_levels: WAPP power levels are between 0.892 and 6.408 (still bad) 2008-Apr-29 20:38:09 INFO5 check_wapp_levels: WAPP power levels are between 0.893 and 6.404 (still bad) 2008-Apr-29 20:38:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (6.413 > 1.4)! 2008-Apr-29 20:38:11 LOG4 check_wapp_levels: WAPP-1 power levels: 0.894 6.413 1.063 1.001 2008-Apr-29 20:38:11 LOG4 check_wapp_levels: WAPP-2 power levels: 0.993 0.906 0.917 0.969 2008-Apr-29 20:38:11 LOG4 check_wapp_levels: WAPP-3 power levels: 1.060 1.077 0.922 1.086 2008-Apr-29 20:38:11 LOG4 check_wapp_levels: WAPP-4 power levels: 0.921 0.974 1.005 1.078 2008-Apr-29 20:38:13 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 6.421 (still bad) 2008-Apr-29 20:38:15 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 6.410 (still bad) 2008-Apr-29 20:38:17 INFO5 check_wapp_levels: WAPP power levels are between 0.898 and 6.405 (still bad) 2008-Apr-29 20:38:19 INFO5 check_wapp_levels: WAPP power levels are between 0.894 and 6.408 (still bad) 2008-Apr-29 20:38:21 INFO5 check_wapp_levels: WAPP power levels are between 0.894 and 6.415 (still bad) 2008-Apr-29 20:38:23 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 6.423 (still bad) 2008-Apr-29 20:38:25 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 6.426 (still bad) 2008-Apr-29 20:38:27 INFO5 check_wapp_levels: WAPP power levels are between 0.900 and 6.431 (still bad) 2008-Apr-29 20:38:29 INFO5 check_wapp_levels: WAPP power levels are between 0.899 and 6.443 (still bad) 2008-Apr-29 20:38:31 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 6.443 (still bad) 2008-Apr-29 20:38:33 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 6.430 (still bad) 2008-Apr-29 20:38:35 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 6.425 (still bad) 2008-Apr-29 20:38:37 INFO5 check_wapp_levels: WAPP power levels are between 0.899 and 6.429 (still bad) 2008-Apr-29 20:38:39 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 6.419 (still bad) 2008-Apr-29 20:38:41 INFO5 check_wapp_levels: WAPP power levels are between 0.898 and 6.434 (still bad) 2008-Apr-29 20:38:43 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 6.442 (still bad) 2008-Apr-29 20:38:45 INFO5 check_wapp_levels: WAPP power levels are between 0.898 and 6.467 (still bad) 2008-Apr-29 20:38:47 INFO5 check_wapp_levels: WAPP power levels are between 0.901 and 6.501 (still bad) 2008-Apr-29 20:38:49 INFO5 check_wapp_levels: WAPP power levels are between 0.901 and 6.530 (still bad) 2008-Apr-29 20:38:51 INFO5 check_wapp_levels: WAPP power levels are between 0.901 and 6.572 (still bad) 2008-Apr-29 20:38:53 INFO5 check_wapp_levels: WAPP power levels are between 0.900 and 6.606 (still bad) 2008-Apr-29 20:38:55 INFO5 check_wapp_levels: WAPP power levels are between 0.900 and 6.619 (still bad) 2008-Apr-29 20:38:57 INFO5 check_wapp_levels: WAPP power levels are between 0.901 and 6.623 (still bad) 2008-Apr-29 20:38:59 INFO5 check_wapp_levels: WAPP power levels are between 0.900 and 6.591 (still bad) 2008-Apr-29 20:39:01 INFO5 check_wapp_levels: WAPP power levels are between 0.901 and 6.555 (still bad) 2008-Apr-29 20:39:03 INFO5 check_wapp_levels: WAPP power levels are between 0.900 and 6.513 (still bad) 2008-Apr-29 20:39:05 INFO5 check_wapp_levels: WAPP power levels are between 0.900 and 6.475 (still bad) 2008-Apr-29 20:39:07 INFO5 check_wapp_levels: WAPP power levels are between 0.900 and 6.448 (still bad) 2008-Apr-29 20:39:09 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 6.420 (still bad) 2008-Apr-29 20:39:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (6.405 > 1.4)! 2008-Apr-29 20:39:12 LOG4 check_wapp_levels: WAPP-1 power levels: 0.891 6.405 1.060 1.001 2008-Apr-29 20:39:12 LOG4 check_wapp_levels: WAPP-2 power levels: 0.989 0.900 0.918 0.970 2008-Apr-29 20:39:12 LOG4 check_wapp_levels: WAPP-3 power levels: 1.061 1.076 0.931 1.095 2008-Apr-29 20:39:12 LOG4 check_wapp_levels: WAPP-4 power levels: 0.920 0.973 1.002 1.077 2008-Apr-29 20:39:14 INFO5 check_wapp_levels: WAPP power levels are between 0.890 and 6.395 (still bad) 2008-Apr-29 20:39:16 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 6.397 (still bad) 2008-Apr-29 20:39:18 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 6.398 (still bad) 2008-Apr-29 20:39:20 INFO5 check_wapp_levels: WAPP power levels are between 0.891 and 6.406 (still bad) 2008-Apr-29 20:39:22 INFO5 check_wapp_levels: WAPP power levels are between 0.894 and 6.395 (still bad) 2008-Apr-29 20:39:24 INFO5 check_wapp_levels: WAPP power levels are between 0.889 and 6.397 (still bad) 2008-Apr-29 20:39:26 INFO5 check_wapp_levels: WAPP power levels are between 0.894 and 6.405 (still bad) 2008-Apr-29 20:39:28 INFO5 check_wapp_levels: WAPP power levels are between 0.894 and 6.398 (still bad) 2008-Apr-29 20:39:30 INFO5 check_wapp_levels: WAPP power levels are between 0.890 and 6.393 (still bad) 2008-Apr-29 20:39:32 INFO5 check_wapp_levels: WAPP power levels are between 0.890 and 6.387 (still bad) 2008-Apr-29 20:39:34 INFO5 check_wapp_levels: WAPP power levels are between 0.893 and 6.394 (still bad) 2008-Apr-29 20:39:36 INFO5 check_wapp_levels: WAPP power levels are between 0.891 and 6.401 (still bad) 2008-Apr-29 20:39:38 INFO5 check_wapp_levels: WAPP power levels are between 0.892 and 6.403 (still bad) 2008-Apr-29 20:39:40 INFO5 check_wapp_levels: WAPP power levels are between 0.893 and 6.394 (still bad) 2008-Apr-29 20:39:42 INFO5 check_wapp_levels: WAPP power levels are between 0.890 and 6.406 (still bad) 2008-Apr-29 20:39:44 INFO5 check_wapp_levels: WAPP power levels are between 0.891 and 6.390 (still bad) 2008-Apr-29 20:39:46 INFO5 check_wapp_levels: WAPP power levels are between 0.889 and 6.395 (still bad) 2008-Apr-29 20:39:48 INFO5 check_wapp_levels: WAPP power levels are between 0.893 and 6.394 (still bad) 2008-Apr-29 20:39:50 INFO5 check_wapp_levels: WAPP power levels are between 0.893 and 6.395 (still bad) 2008-Apr-29 20:39:52 INFO5 check_wapp_levels: WAPP power levels are between 0.894 and 6.396 (still bad) 2008-Apr-29 20:39:54 INFO5 check_wapp_levels: WAPP power levels are between 0.892 and 6.377 (still bad) 2008-Apr-29 20:39:56 INFO5 check_wapp_levels: WAPP power levels are between 0.894 and 6.386 (still bad) 2008-Apr-29 20:39:58 INFO5 check_wapp_levels: WAPP power levels are between 0.890 and 6.393 (still bad) 2008-Apr-29 20:40:00 INFO5 check_wapp_levels: WAPP power levels are between 0.889 and 6.388 (still bad) 2008-Apr-29 20:40:02 INFO5 check_wapp_levels: WAPP power levels are between 0.891 and 6.399 (still bad) 2008-Apr-29 20:40:04 INFO5 check_wapp_levels: WAPP power levels are between 0.893 and 6.381 (still bad) 2008-Apr-29 20:40:06 INFO5 check_wapp_levels: WAPP power levels are between 0.889 and 6.399 (still bad) 2008-Apr-29 20:40:08 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 6.398 (still bad) 2008-Apr-29 20:40:10 INFO5 check_wapp_levels: WAPP power levels are between 0.888 and 6.400 (still bad) 2008-Apr-29 20:40:12 INFO5 check_wapp_levels: WAPP power levels are between 0.893 and 6.401 (still bad) 2008-Apr-29 20:40:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (6.384 > 1.4)! 2008-Apr-29 20:40:14 LOG4 check_wapp_levels: WAPP-1 power levels: 0.894 6.384 1.059 0.999 2008-Apr-29 20:40:14 LOG4 check_wapp_levels: WAPP-2 power levels: 0.985 0.899 0.916 0.967 2008-Apr-29 20:40:14 LOG4 check_wapp_levels: WAPP-3 power levels: 1.057 1.076 0.920 1.084 2008-Apr-29 20:40:14 LOG4 check_wapp_levels: WAPP-4 power levels: 0.917 0.971 0.999 1.076 2008-Apr-29 20:40:16 INFO5 check_wapp_levels: WAPP power levels are between 0.890 and 6.386 (still bad) 2008-Apr-29 20:40:18 INFO5 check_wapp_levels: WAPP power levels are between 0.890 and 6.376 (still bad) 2008-Apr-29 20:40:20 INFO5 check_wapp_levels: WAPP power levels are between 0.894 and 6.390 (still bad) 2008-Apr-29 20:40:22 INFO5 check_wapp_levels: WAPP power levels are between 0.889 and 6.384 (still bad) 2008-Apr-29 20:40:24 INFO5 check_wapp_levels: WAPP power levels are between 0.889 and 6.383 (still bad) 2008-Apr-29 20:40:26 INFO5 check_wapp_levels: WAPP power levels are between 0.891 and 6.381 (still bad) 2008-Apr-29 20:40:28 INFO5 check_wapp_levels: WAPP power levels are between 0.890 and 6.387 (still bad) 2008-Apr-29 20:40:30 INFO5 check_wapp_levels: WAPP power levels are between 0.890 and 6.391 (still bad) 2008-Apr-29 20:40:32 INFO5 check_wapp_levels: WAPP power levels are between 0.891 and 6.379 (still bad) 2008-Apr-29 20:40:34 INFO5 check_wapp_levels: WAPP power levels are between 0.889 and 6.396 (still bad) 2008-Apr-29 20:40:37 INFO5 check_wapp_levels: WAPP power levels are between 0.890 and 6.406 (still bad) 2008-Apr-29 20:40:39 INFO5 check_wapp_levels: WAPP power levels are between 0.890 and 6.401 (still bad) 2008-Apr-29 20:40:41 INFO5 check_wapp_levels: WAPP power levels are between 0.890 and 6.398 (still bad) 2008-Apr-29 20:40:43 INFO5 check_wapp_levels: WAPP power levels are between 0.890 and 6.406 (still bad) 2008-Apr-29 20:40:45 INFO5 check_wapp_levels: WAPP power levels are between 0.893 and 6.409 (still bad) 2008-Apr-29 20:40:47 INFO5 check_wapp_levels: WAPP power levels are between 0.892 and 6.412 (still bad) 2008-Apr-29 20:40:49 INFO5 check_wapp_levels: WAPP power levels are between 0.893 and 6.395 (still bad) 2008-Apr-29 20:40:51 INFO5 check_wapp_levels: WAPP power levels are between 0.892 and 6.395 (still bad) 2008-Apr-29 20:40:53 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 6.396 (still bad) 2008-Apr-29 20:40:55 INFO5 check_wapp_levels: WAPP power levels are between 0.893 and 6.397 (still bad) 2008-Apr-29 20:40:57 INFO5 check_wapp_levels: WAPP power levels are between 0.890 and 6.404 (still bad) 2008-Apr-29 20:40:59 INFO5 check_wapp_levels: WAPP power levels are between 0.894 and 6.410 (still bad) 2008-Apr-29 20:41:01 INFO5 check_wapp_levels: WAPP power levels are between 0.891 and 6.398 (still bad) 2008-Apr-29 20:41:03 INFO5 check_wapp_levels: WAPP power levels are between 0.893 and 6.414 (still bad) 2008-Apr-29 20:41:05 INFO5 check_wapp_levels: WAPP power levels are between 0.892 and 6.405 (still bad) 2008-Apr-29 20:41:07 INFO5 check_wapp_levels: WAPP power levels are between 0.894 and 6.409 (still bad) 2008-Apr-29 20:41:09 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 6.402 (still bad) 2008-Apr-29 20:41:11 INFO5 check_wapp_levels: WAPP power levels are between 0.891 and 6.393 (still bad) 2008-Apr-29 20:41:13 INFO5 check_wapp_levels: WAPP power levels are between 0.891 and 6.414 (still bad) 2008-Apr-29 20:41:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (6.391 > 1.4)! 2008-Apr-29 20:41:15 LOG4 check_wapp_levels: WAPP-1 power levels: 0.893 6.391 1.059 1.002 2008-Apr-29 20:41:15 LOG4 check_wapp_levels: WAPP-2 power levels: 0.987 0.902 0.915 0.966 2008-Apr-29 20:41:15 LOG4 check_wapp_levels: WAPP-3 power levels: 1.061 1.078 0.922 1.085 2008-Apr-29 20:41:15 LOG4 check_wapp_levels: WAPP-4 power levels: 0.917 0.968 0.999 1.074 2008-Apr-29 20:41:17 INFO5 check_wapp_levels: WAPP power levels are between 0.894 and 6.401 (still bad) 2008-Apr-29 20:41:19 INFO5 check_wapp_levels: WAPP power levels are between 0.893 and 6.401 (still bad) 2008-Apr-29 20:41:21 INFO5 check_wapp_levels: WAPP power levels are between 0.893 and 6.404 (still bad) 2008-Apr-29 20:41:23 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 6.410 (still bad) 2008-Apr-29 20:41:25 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 6.414 (still bad) 2008-Apr-29 20:41:27 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 6.403 (still bad) 2008-Apr-29 20:41:29 INFO5 check_wapp_levels: WAPP power levels are between 0.894 and 6.406 (still bad) 2008-Apr-29 20:41:31 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 6.406 (still bad) 2008-Apr-29 20:41:33 INFO5 check_wapp_levels: WAPP power levels are between 0.892 and 6.420 (still bad) 2008-Apr-29 20:41:35 INFO5 check_wapp_levels: WAPP power levels are between 0.894 and 6.409 (still bad) 2008-Apr-29 20:41:37 INFO5 check_wapp_levels: WAPP power levels are between 0.894 and 6.404 (still bad) 2008-Apr-29 20:41:39 INFO5 check_wapp_levels: WAPP power levels are between 0.898 and 6.411 (still bad) 2008-Apr-29 20:41:41 INFO5 check_wapp_levels: WAPP power levels are between 0.893 and 6.405 (still bad) 2008-Apr-29 20:41:43 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 6.407 (still bad) 2008-Apr-29 20:41:45 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 6.406 (still bad) 2008-Apr-29 20:41:47 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 6.409 (still bad) 2008-Apr-29 20:41:49 INFO5 check_wapp_levels: WAPP power levels are between 0.893 and 6.414 (still bad) 2008-Apr-29 20:41:51 INFO5 check_wapp_levels: WAPP power levels are between 0.892 and 6.419 (still bad) 2008-Apr-29 20:41:53 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 6.417 (still bad) 2008-Apr-29 20:41:55 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 6.415 (still bad) 2008-Apr-29 20:41:57 INFO5 check_wapp_levels: WAPP power levels are between 0.892 and 6.412 (still bad) 2008-Apr-29 20:41:59 INFO5 check_wapp_levels: WAPP power levels are between 0.894 and 6.399 (still bad) 2008-Apr-29 20:42:02 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 6.416 (still bad) 2008-Apr-29 20:42:04 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 6.403 (still bad) 2008-Apr-29 20:42:06 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 6.424 (still bad) 2008-Apr-29 20:42:08 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 6.417 (still bad) 2008-Apr-29 20:42:10 INFO5 check_wapp_levels: WAPP power levels are between 0.892 and 6.406 (still bad) 2008-Apr-29 20:42:12 INFO5 check_wapp_levels: WAPP power levels are between 0.892 and 6.396 (still bad) 2008-Apr-29 20:42:14 INFO5 check_wapp_levels: WAPP power levels are between 0.898 and 6.409 (still bad) 2008-Apr-29 20:42:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (6.407 > 1.4)! 2008-Apr-29 20:42:16 LOG4 check_wapp_levels: WAPP-1 power levels: 0.896 6.407 1.058 1.000 2008-Apr-29 20:42:16 LOG4 check_wapp_levels: WAPP-2 power levels: 0.988 0.903 0.915 0.967 2008-Apr-29 20:42:16 LOG4 check_wapp_levels: WAPP-3 power levels: 1.062 1.078 0.920 1.087 2008-Apr-29 20:42:16 LOG4 check_wapp_levels: WAPP-4 power levels: 0.918 0.969 1.000 1.074 2008-Apr-29 20:42:18 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 6.400 (still bad) 2008-Apr-29 20:42:20 INFO5 check_wapp_levels: WAPP power levels are between 0.891 and 6.406 (still bad) 2008-Apr-29 20:42:22 INFO5 check_wapp_levels: WAPP power levels are between 0.892 and 6.403 (still bad) 2008-Apr-29 20:42:24 INFO5 check_wapp_levels: WAPP power levels are between 0.892 and 6.403 (still bad) 2008-Apr-29 20:42:26 INFO5 check_wapp_levels: WAPP power levels are between 0.898 and 6.396 (still bad) 2008-Apr-29 20:42:28 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 6.402 (still bad) 2008-Apr-29 20:42:30 INFO5 check_wapp_levels: WAPP power levels are between 0.894 and 6.399 (still bad) 2008-Apr-29 20:42:32 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 6.399 (still bad) 2008-Apr-29 20:42:34 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 6.387 (still bad) 2008-Apr-29 20:42:36 INFO5 check_wapp_levels: WAPP power levels are between 0.892 and 6.387 (still bad) 2008-Apr-29 20:42:38 INFO5 check_wapp_levels: WAPP power levels are between 0.893 and 6.400 (still bad) 2008-Apr-29 20:42:40 INFO5 check_wapp_levels: WAPP power levels are between 0.892 and 6.401 (still bad) 2008-Apr-29 20:42:42 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 6.411 (still bad) 2008-Apr-29 20:42:44 INFO5 check_wapp_levels: WAPP power levels are between 0.894 and 6.421 (still bad) 2008-Apr-29 20:42:46 INFO5 check_wapp_levels: WAPP power levels are between 0.894 and 6.418 (still bad) 2008-Apr-29 20:42:48 INFO5 check_wapp_levels: WAPP power levels are between 0.900 and 6.430 (still bad) 2008-Apr-29 20:42:50 INFO5 check_wapp_levels: WAPP power levels are between 0.899 and 6.431 (still bad) 2008-Apr-29 20:42:52 INFO5 check_wapp_levels: WAPP power levels are between 0.894 and 6.435 (still bad) 2008-Apr-29 20:42:54 INFO5 check_wapp_levels: WAPP power levels are between 0.894 and 6.430 (still bad) 2008-Apr-29 20:42:56 INFO5 check_wapp_levels: WAPP power levels are between 0.900 and 6.429 (still bad) 2008-Apr-29 20:42:58 INFO5 check_wapp_levels: WAPP power levels are between 0.894 and 6.430 (still bad) 2008-Apr-29 20:43:00 INFO5 check_wapp_levels: WAPP power levels are between 0.892 and 6.434 (still bad) 2008-Apr-29 20:43:02 INFO5 check_wapp_levels: WAPP power levels are between 0.893 and 6.418 (still bad) 2008-Apr-29 20:43:04 INFO5 check_wapp_levels: WAPP power levels are between 0.894 and 6.423 (still bad) 2008-Apr-29 20:43:06 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 6.409 (still bad) 2008-Apr-29 20:43:08 INFO5 check_wapp_levels: WAPP power levels are between 0.891 and 6.412 (still bad) 2008-Apr-29 20:43:10 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 6.397 (still bad) 2008-Apr-29 20:43:12 INFO5 check_wapp_levels: WAPP power levels are between 0.892 and 6.399 (still bad) 2008-Apr-29 20:43:13 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-29 20:43:13 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-29 20:43:13 LOG5 end_task: Level: (4) ID = <10271> Status = 0 0 0 0 ok 2008-Apr-29 20:43:13 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-29 20:43:13 LOG5 end_task: Level: (3) ID = <10270> Status = 0 0 0 0 ok 2008-Apr-29 20:43:13 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-29 20:43:13 LOG5 finish_task: Level: (2) ID = <10237> Status = 0 0 0 0 ok 2008-Apr-29 20:43:13 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-29 20:43:13 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-29 20:43:13 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-29 20:43:13 LOG5 end_task: Level: (2) ID = <10237> Status = 0 0 0 0 ok 2008-Apr-29 20:43:13 COMMAND run_command_line: EXECUTING command 27: 'FIXEDDRIFT az=113.28 alfaangle=88.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p1_012 ra=95300.00 dec=233630.00' 2008-Apr-29 20:43:13 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-29 20:43:14 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-29 20:43:14 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 113.28 88.4 hcorcal 5 tracking no first 1 AGES3193_p1_012 95300.00 233630.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-29 20:43:14 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-29 20:43:14 LOG5 begin_task: Level: (2) ID = <10272> Status = 0 0 0 0 ok 2008-Apr-29 20:43:14 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES3193_p1_010' 2008-Apr-29 20:43:14 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-29 20:43:14 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p1_012} 2008-Apr-29 20:43:14 INFO3 fixed_driftmap: Sending telescope to Az = 113.28 and ZA = 14.72 2008-Apr-29 20:43:14 LOG3 track_source: Calling 'track_source AGES3193_p1_012 113.28 14.7196408976 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-29 20:43:14 START begin_task: Starting task 'sending tracking commands' 2008-Apr-29 20:43:14 LOG5 begin_task: Level: (3) ID = <10273> Status = 0 0 0 0 ok 2008-Apr-29 20:43:14 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p1_012} INFO {Slewing to source 'AGES3193_p1_012' ...} 2008-Apr-29 20:43:14 INFO1 track_source: Starting to track AGES3193_p1_012 2008-Apr-29 20:43:14 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p1_012" 2008-Apr-29 20:43:14 LOG3 vw_send: To DATATAKING: set ra 113.28 2008-Apr-29 20:43:14 LOG3 vw_send: To DATATAKING: set dec 14.7196408976 2008-Apr-29 20:43:14 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-29 20:43:14 LOG3 vw_send: To DATATAKING: pnt tr 113.28 14.7196408976 -CF 2008-Apr-29 20:43:14 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-29 20:43:14 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-29 20:43:14 LOG5 finish_task: Level: (3) ID = <10273> Status = 0 0 0 0 ok 2008-Apr-29 20:43:14 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-29 20:43:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 20:43:14 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-29 20:43:14 LOG5 end_task: Level: (3) ID = <10273> Status = 0 0 0 0 ok 2008-Apr-29 20:43:14 START begin_task: Starting task 'rotate ALFA to +88.4 degrees' 2008-Apr-29 20:43:14 LOG5 begin_task: Level: (3) ID = <10274> Status = 0 0 0 0 ok 2008-Apr-29 20:43:14 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +88.4 degrees ...} 2008-Apr-29 20:43:14 INFO2 rotate_alfa: ALFA commanded to +88.4 degrees 2008-Apr-29 20:43:14 LOG3 sock_errsend: To ALFAMOTOR: POSITION 88.4 REPLY 2008-Apr-29 20:43:14 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-29 20:43:14 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-29 20:43:14 LOG5 begin_task: Level: (4) ID = <10275> Status = 0 0 0 0 ok 2008-Apr-29 20:43:14 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p1_012" 2008-Apr-29 20:43:14 LOG4 got_cormsg: From DATATAKING: set ra 113.28 2008-Apr-29 20:43:14 LOG4 got_cormsg: From DATATAKING: set dec 14.7196408976 2008-Apr-29 20:43:14 LOG4 got_cormsg: From DATATAKING: vw% 113.28 2008-Apr-29 20:43:14 LOG4 got_cormsg: From DATATAKING: vw% 14.7196408976 2008-Apr-29 20:43:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 20:43:14 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-29 20:43:14 LOG4 got_cormsg: From DATATAKING: pnt tr 113.28 14.7196408976 -CF 2008-Apr-29 20:43:14 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-29 20:43:14 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-29 20:43:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 20:43:14 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 6.409 (still bad) 2008-Apr-29 20:43:23 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-29 20:43:23 INFO3 alfa_motor: ALFA rotator in-position +88.40 degrees 2008-Apr-29 20:43:23 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-29 20:43:23 LOG5 end_task: Level: (4) ID = <10275> Status = 0 0 0 0 ok 2008-Apr-29 20:43:23 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-29 20:43:23 STOP finish_task: Finishing task 'rotate ALFA to +88.4 degrees' 2008-Apr-29 20:43:23 LOG5 finish_task: Level: (3) ID = <10274> Status = 0 0 0 0 ok 2008-Apr-29 20:43:23 INFO2 finish_task: DONE finished configuration: rotating ALFA to +88.4 degrees 2008-Apr-29 20:43:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 20:43:23 STOP end_task: Finishing task 'rotate ALFA to +88.4 degrees' with status 'OK' 2008-Apr-29 20:43:23 LOG5 end_task: Level: (3) ID = <10274> Status = 0 0 0 0 ok 2008-Apr-29 20:43:23 START begin_task: Starting task 'waiting on telescope' 2008-Apr-29 20:43:23 LOG5 begin_task: Level: (3) ID = <10276> Status = 0 0 0 0 ok 2008-Apr-29 20:43:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-29 20:43:23 LOG3 waittrk: Start waittrk 5 2008-Apr-29 20:43:23 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-29 20:43:23 LOG5 begin_task: Level: (4) ID = <10277> Status = 0 0 0 0 ok 2008-Apr-29 20:43:28 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-29 20:43:28 LOG5 end_task: Level: (4) ID = <10277> Status = 0 0 0 0 ok 2008-Apr-29 20:43:28 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-29 20:43:28 LOG5 begin_task: Level: (4) ID = <10278> Status = 0 0 0 0 ok 2008-Apr-29 20:45:19 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-29 20:45:19 LOG5 end_task: Level: (4) ID = <10278> Status = 0 0 0 0 ok 2008-Apr-29 20:45:19 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-29 20:45:19 INFO2 waittrk: Now tracking AGES3193_p1_012 2008-Apr-29 20:45:19 LOG4 waittrk: Current telescope position: Az = 113.04 ZA = 14.73 2008-Apr-29 20:45:19 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-29 20:45:19 LOG5 finish_task: Level: (3) ID = <10276> Status = 0 0 0 0 ok 2008-Apr-29 20:45:19 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-29 20:45:19 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 20:45:19 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-29 20:45:19 LOG5 end_task: Level: (3) ID = <10276> Status = 0 0 0 0 ok 2008-Apr-29 20:45:19 START begin_task: Starting task 'selecting calibration type' 2008-Apr-29 20:45:19 LOG5 begin_task: Level: (3) ID = <10279> Status = 0 0 0 0 ok 2008-Apr-29 20:45:19 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-29 20:45:20 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-29 20:45:20 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 20:45:20 START begin_task: Starting task 'waiting on setcal' 2008-Apr-29 20:45:20 LOG5 begin_task: Level: (4) ID = <10280> Status = 0 0 0 0 ok 2008-Apr-29 20:45:20 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-29 20:45:20 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 20:45:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 20:45:20 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-29 20:45:20 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-29 20:45:20 LOG5 end_task: Level: (4) ID = <10280> Status = 0 0 0 0 ok 2008-Apr-29 20:45:20 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-29 20:45:20 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-29 20:45:20 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-29 20:45:20 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-29 20:45:20 LOG5 begin_task: Level: (4) ID = <10281> Status = 0 0 0 0 ok 2008-Apr-29 20:45:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 20:45:20 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-29 20:45:20 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-29 20:45:20 LOG5 end_task: Level: (4) ID = <10281> Status = 0 0 0 0 ok 2008-Apr-29 20:45:21 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-29 20:45:21 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-29 20:45:21 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-29 20:45:21 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-29 20:45:21 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-29 20:45:21 LOG5 begin_task: Level: (4) ID = <10282> Status = 0 0 0 0 ok 2008-Apr-29 20:45:21 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-29 20:45:21 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-29 20:45:21 LOG5 end_task: Level: (4) ID = <10282> Status = 0 0 0 0 ok 2008-Apr-29 20:45:21 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-29 20:45:21 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-29 20:45:21 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-29 20:45:21 LOG5 finish_task: Level: (3) ID = <10279> Status = 0 0 0 0 ok 2008-Apr-29 20:45:21 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-29 20:45:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 20:45:21 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-29 20:45:21 LOG5 end_task: Level: (3) ID = <10279> Status = 0 0 0 0 ok 2008-Apr-29 20:45:21 LOG5 dopset_later: Calling 'dopset_later 49.768541928616017' 2008-Apr-29 20:45:21 INFO3 dopset_later: Setting Doppler correction for 20:46:10 (49.8 seconds from now) 2008-Apr-29 20:45:21 LOG5 antvel: Calling 'antvel 113.280000 14.719641 F 49.768541928616017' 2008-Apr-29 20:45:21 LOG2 antvel: Parameters to Doppler: Heliocentric 89170 2008 120 0.0 2008-Apr-29 20:45:21 INFO5 antvel: Computed antenna velocity: +28.43646 km/s 2008-Apr-29 20:45:21 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=28.436459454800001 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-29 20:45:21 INFO4 dopset_gen: New sky frequencies: 1381.112425 1381.112425 1381.112425 1381.112425 1381.112425 1381.112425 1381.112425 1381.112425 1381.112425 2008-Apr-29 20:45:21 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.112425 sky0=1381.112425 sky1=1381.112425 sky2=1381.112425 sky3=1381.112425 sky4=1381.112425 sky5=1381.112425 sky6=1381.112425 sky7=1381.112425 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-29 20:45:21 LOG2 dopset_gen: Result from 'sky2syn': 1631.112425 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-29 20:45:21 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631112425.0} 2008-Apr-29 20:45:21 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 20:45:21 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-29 20:45:21 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-29 20:45:21 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:14.2 Dec = +23:36:32.5 2008-Apr-29 20:45:21 LOG3 track_source: Calling 'track_source AGES3193_p1_012 095214.2 233632.5 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-29 20:45:21 START begin_task: Starting task 'sending tracking commands' 2008-Apr-29 20:45:21 LOG5 begin_task: Level: (3) ID = <10283> Status = 0 0 0 0 ok 2008-Apr-29 20:45:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p1_012} INFO {Slewing to source 'AGES3193_p1_012' ...} 2008-Apr-29 20:45:21 INFO1 track_source: Starting to track AGES3193_p1_012 2008-Apr-29 20:45:21 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p1_012" 2008-Apr-29 20:45:21 LOG3 vw_send: To DATATAKING: set ra 095214.2 2008-Apr-29 20:45:21 LOG3 vw_send: To DATATAKING: set dec 233632.5 2008-Apr-29 20:45:21 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-29 20:45:21 LOG3 vw_send: To DATATAKING: pnt tr 095214.2 233632.5 -CJ 2008-Apr-29 20:45:21 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-29 20:45:21 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-29 20:45:21 LOG5 finish_task: Level: (3) ID = <10283> Status = 0 0 0 0 ok 2008-Apr-29 20:45:21 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-29 20:45:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 20:45:21 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-29 20:45:21 LOG5 end_task: Level: (3) ID = <10283> Status = 0 0 0 0 ok 2008-Apr-29 20:45:21 START begin_task: Starting task 'waiting on telescope' 2008-Apr-29 20:45:21 LOG5 begin_task: Level: (3) ID = <10284> Status = 0 0 0 0 ok 2008-Apr-29 20:45:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-29 20:45:21 LOG3 waittrk: Start waittrk 5 2008-Apr-29 20:45:21 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-29 20:45:21 LOG5 begin_task: Level: (4) ID = <10285> Status = 0 0 0 0 ok 2008-Apr-29 20:45:21 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631112425.0} 2008-Apr-29 20:45:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 20:45:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 20:45:21 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p1_012" 2008-Apr-29 20:45:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 20:45:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 20:45:21 LOG4 got_cormsg: From DATATAKING: set ra 095214.2 2008-Apr-29 20:45:21 LOG4 got_cormsg: From DATATAKING: set dec 233632.5 2008-Apr-29 20:45:21 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-29 20:45:21 LOG4 got_cormsg: From DATATAKING: pnt tr 095214.2 233632.5 -CJ 2008-Apr-29 20:45:21 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-29 20:45:21 LOG4 got_cormsg: From DATATAKING: 095214.2 2008-Apr-29 20:45:21 LOG4 got_cormsg: From DATATAKING: vw% 233632.5 2008-Apr-29 20:45:21 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2008-Apr-29 20:45:26 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-29 20:45:26 LOG5 end_task: Level: (4) ID = <10285> Status = 0 0 0 0 ok 2008-Apr-29 20:45:26 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-29 20:45:26 LOG5 begin_task: Level: (4) ID = <10286> Status = 0 0 0 0 ok 2008-Apr-29 20:45:28 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-29 20:45:28 LOG5 end_task: Level: (4) ID = <10286> Status = 0 0 0 0 ok 2008-Apr-29 20:45:28 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-29 20:45:28 INFO2 waittrk: Now tracking AGES3193_p1_012 2008-Apr-29 20:45:28 LOG4 waittrk: Current telescope position: Az = 113.02 ZA = 14.75 2008-Apr-29 20:45:28 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-29 20:45:28 LOG5 finish_task: Level: (3) ID = <10284> Status = 0 0 0 0 ok 2008-Apr-29 20:45:28 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-29 20:45:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 20:45:28 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-29 20:45:28 LOG5 end_task: Level: (3) ID = <10284> Status = 0 0 0 0 ok 2008-Apr-29 20:45:28 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-29 20:45:28 LOG5 begin_task: Level: (3) ID = <10287> Status = 0 0 0 0 ok 2008-Apr-29 20:45:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-29 20:45:28 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-29 20:45:28 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-29 20:45:28 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-29 20:45:29 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 20:45:29 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-29 20:45:29 LOG5 begin_task: Level: (4) ID = <10288> Status = 0 0 0 0 ok 2008-Apr-29 20:45:29 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-29 20:45:29 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 20:45:29 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 20:45:29.321 (seconds: 74729.321)!} 2008-Apr-29 20:45:29 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 20:45:29.321 (seconds: 74729.321)! 2008-Apr-29 20:45:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 20:45:31 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-29 20:45:31 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-29 20:45:31 LOG5 end_task: Level: (4) ID = <10288> Status = 0 0 0 0 ok 2008-Apr-29 20:45:31 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-29 20:45:31 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-29 20:45:31 LOG5 begin_task: Level: (4) ID = <10289> Status = 0 0 0 0 ok 2008-Apr-29 20:45:31 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-29 20:45:32 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-29 20:45:32 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-29 20:45:32 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-29 20:45:32 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-29 20:45:32 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-29 20:45:32 LOG5 begin_task: Level: (5) ID = <10290> Status = 0 0 0 0 ok 2008-Apr-29 20:45:32 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-29 20:45:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 20:45:32 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 9 dB --- beam 1: 7 6 dB 2008-Apr-29 20:45:32 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 2 dB --- beam 5: 6 6 dB 2008-Apr-29 20:45:32 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-29 20:45:32 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 2 2 dB 2008-Apr-29 20:45:32 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-29 20:45:32 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-29 20:45:32 LOG5 end_task: Level: (5) ID = <10290> Status = 0 0 0 0 ok 2008-Apr-29 20:45:32 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.928 1.008 ALFA beam 1: 1.092 1.025 2008-Apr-29 20:45:32 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.047 0.958 ALFA beam 3: 0.960 0.998 2008-Apr-29 20:45:32 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.109 1.119 ALFA beam 5: 0.967 0.881 2008-Apr-29 20:45:32 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.954 0.992 ALFA beam 7: 1.038 1.099 2008-Apr-29 20:45:32 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-29 20:45:32 LOG5 finish_task: Level: (4) ID = <10289> Status = 0 0 0 0 ok 2008-Apr-29 20:45:32 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-29 20:45:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 20:45:32 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-29 20:45:32 LOG5 end_task: Level: (4) ID = <10289> Status = 0 0 0 0 ok 2008-Apr-29 20:45:32 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-29 20:45:32 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-29 20:45:32 LOG5 finish_task: Level: (3) ID = <10287> Status = 0 0 0 0 ok 2008-Apr-29 20:45:32 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-29 20:45:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 20:45:32 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-29 20:45:32 LOG5 end_task: Level: (3) ID = <10287> Status = 0 0 0 0 ok 2008-Apr-29 20:45:32 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Karen O'Neil 2008-Apr-29 20:45:32 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Karen O'Neil 2008-Apr-29 20:45:32 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Karen O'Neil 2008-Apr-29 20:45:32 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Karen O'Neil 2008-Apr-29 20:45:32 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-29 20:45:32 START begin_task: Starting task 'WAPP calibration' 2008-Apr-29 20:45:32 LOG5 begin_task: Level: (3) ID = <10291> Status = 0 0 0 0 ok 2008-Apr-29 20:45:32 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-29 20:45:32 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-29 20:45:32 START begin_task: Starting task 'selecting calibration type' 2008-Apr-29 20:45:32 LOG5 begin_task: Level: (4) ID = <10292> Status = 0 0 0 0 ok 2008-Apr-29 20:45:33 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-29 20:45:33 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-29 20:45:33 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 20:45:33 START begin_task: Starting task 'waiting on setcal' 2008-Apr-29 20:45:33 LOG5 begin_task: Level: (5) ID = <10293> Status = 0 0 0 0 ok 2008-Apr-29 20:45:33 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Karen O'Neil' 2008-Apr-29 20:45:33 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-29 20:45:33 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 20:45:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 20:45:33 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-29 20:45:33 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-29 20:45:33 LOG5 end_task: Level: (5) ID = <10293> Status = 0 0 0 0 ok 2008-Apr-29 20:45:33 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-29 20:45:33 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-29 20:45:33 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-29 20:45:33 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-29 20:45:33 LOG5 begin_task: Level: (5) ID = <10294> Status = 0 0 0 0 ok 2008-Apr-29 20:45:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 20:45:33 NOTE WAPPDATA-new_file: New FITS file: wapp.20080429.a2048.0006.fits 2008-Apr-29 20:45:33 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080429.a2048.0006.fits} 2008-Apr-29 20:45:33 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-29 20:45:33 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-29 20:45:33 LOG5 end_task: Level: (5) ID = <10294> Status = 0 0 0 0 ok 2008-Apr-29 20:45:33 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-29 20:45:33 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-29 20:45:33 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-29 20:45:33 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-29 20:45:33 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-29 20:45:33 LOG5 begin_task: Level: (5) ID = <10295> Status = 0 0 0 0 ok 2008-Apr-29 20:45:33 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-29 20:45:33 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-29 20:45:33 LOG5 end_task: Level: (5) ID = <10295> Status = 0 0 0 0 ok 2008-Apr-29 20:45:33 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-29 20:45:33 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-29 20:45:33 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-29 20:45:33 LOG5 finish_task: Level: (4) ID = <10292> Status = 0 0 0 0 ok 2008-Apr-29 20:45:33 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-29 20:45:33 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 20:45:33 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-29 20:45:33 LOG5 end_task: Level: (4) ID = <10292> Status = 0 0 0 0 ok 2008-Apr-29 20:45:33 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-29 20:45:33 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-29 20:45:33 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-29 20:45:33 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-29 20:45:33 LOG5 begin_task: Level: (4) ID = <10296> Status = 0 0 0 0 ok 2008-Apr-29 20:45:34 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-29 20:45:34 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-29 20:45:34 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-29 20:45:34 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-29 20:45:34 LOG5 end_task: Level: (4) ID = <10296> Status = 0 0 0 0 ok 2008-Apr-29 20:45:34 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-29 20:45:34 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-29 20:45:34 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-29 20:45:34 LOG5 begin_task: Level: (4) ID = <10297> Status = 0 0 0 0 ok 2008-Apr-29 20:45:34 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-29 20:45:34 LOG5 log_alfabeam: Parameters: 9.8706111111111099 23.609027777777779 10.864748 2008.3309102403223 88.399979 2008-Apr-29 20:45:34 LOG4 log_alfabeam: ALFABEAM 0 9.870611111111112 23.609027777777772 2008-Apr-29 20:45:34 LOG4 log_alfabeam: ALFABEAM 1 9.872760681302047 23.517983606396456 2008-Apr-29 20:45:34 LOG4 log_alfabeam: ALFABEAM 2 9.878048981365357 23.578657955456311 2008-Apr-29 20:45:34 LOG4 log_alfabeam: ALFABEAM 3 9.875931530057066 23.669625617063915 2008-Apr-29 20:45:34 LOG4 log_alfabeam: ALFABEAM 4 9.868499266731110 23.700490889371888 2008-Apr-29 20:45:34 LOG4 log_alfabeam: ALFABEAM 5 9.863169024194773 23.639283375662355 2008-Apr-29 20:45:34 LOG4 log_alfabeam: ALFABEAM 6 9.865313212535224 23.547743288939611 2008-Apr-29 20:45:34 INFO2 take_spectra: Starting WAPP scan: 812000127 2008-Apr-29 20:45:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-29 20:45:34 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-29 20:45:34 LOG5 begin_task: Level: (5) ID = <10298> Status = 0 0 0 0 ok 2008-Apr-29 20:45:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-29 20:45:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 2735.00 2008-Apr-29 20:45:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.112425 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-29 20:45:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.112425 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 20:45:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.112425 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 20:45:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.112425 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 20:45:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.112425 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 20:45:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.471 > 1.4)! 2008-Apr-29 20:45:40 LOG4 check_wapp_levels: WAPP-1 power levels: 1.272 1.405 1.471 1.383 2008-Apr-29 20:45:40 LOG4 check_wapp_levels: WAPP-2 power levels: 1.047 0.958 0.960 0.998 2008-Apr-29 20:45:40 LOG4 check_wapp_levels: WAPP-3 power levels: 1.109 1.119 0.967 0.881 2008-Apr-29 20:45:40 LOG4 check_wapp_levels: WAPP-4 power levels: 0.954 0.992 1.038 1.099 2008-Apr-29 20:45:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.112425 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 20:45:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.112425 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 20:45:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.112425 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 20:45:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.112425 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 20:45:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-29 20:45:40 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-29 20:45:40 LOG5 end_task: Level: (5) ID = <10298> Status = 0 0 0 0 ok 2008-Apr-29 20:45:40 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-29 20:45:40 LOG5 end_task: Level: (4) ID = <10297> Status = 0 0 0 0 ok 2008-Apr-29 20:45:40 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-29 20:45:40 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-29 20:45:40 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-29 20:45:40 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-29 20:45:40 LOG5 begin_task: Level: (4) ID = <10299> Status = 0 0 0 0 ok 2008-Apr-29 20:45:40 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-29 20:45:40 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-29 20:45:40 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-29 20:45:40 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-29 20:45:40 LOG5 end_task: Level: (4) ID = <10299> Status = 0 0 0 0 ok 2008-Apr-29 20:45:41 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-29 20:45:41 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-29 20:45:41 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-29 20:45:41 LOG5 begin_task: Level: (4) ID = <10300> Status = 0 0 0 0 ok 2008-Apr-29 20:45:41 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-29 20:45:41 LOG5 log_alfabeam: Parameters: 9.8706111111111099 23.609027777777779 10.866698 2008.3309104621389 88.399979 2008-Apr-29 20:45:41 LOG4 log_alfabeam: ALFABEAM 0 9.870611111111108 23.609027777777786 2008-Apr-29 20:45:41 LOG4 log_alfabeam: ALFABEAM 1 9.872765604336168 23.518005383683732 2008-Apr-29 20:45:41 LOG4 log_alfabeam: ALFABEAM 2 9.878050637425771 23.578734596135909 2008-Apr-29 20:45:41 LOG4 log_alfabeam: ALFABEAM 3 9.875928208885147 23.669680977394556 2008-Apr-29 20:45:41 LOG4 log_alfabeam: ALFABEAM 4 9.868494240878123 23.700468731779186 2008-Apr-29 20:45:41 LOG4 log_alfabeam: ALFABEAM 5 9.863167379346940 23.639206753807716 2008-Apr-29 20:45:41 LOG4 log_alfabeam: ALFABEAM 6 9.865316538456014 23.547689326380478 2008-Apr-29 20:45:41 INFO2 take_spectra: Starting WAPP scan: 812000128 2008-Apr-29 20:45:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-29 20:45:41 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-29 20:45:41 LOG5 begin_task: Level: (5) ID = <10301> Status = 0 0 0 0 ok 2008-Apr-29 20:45:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-29 20:45:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 2742.00 2008-Apr-29 20:45:46 INFO5 check_wapp_levels: WAPP power levels are between 1.173 and 1.553 (still bad) 2008-Apr-29 20:45:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.112425 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-29 20:45:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.112425 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 20:45:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.112425 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 20:45:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.112425 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 20:45:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.112425 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 20:45:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.112425 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 20:45:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.112425 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 20:45:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.112425 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 20:45:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.112425 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 20:45:47 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-29 20:45:47 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-29 20:45:47 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-29 20:45:47 LOG5 end_task: Level: (5) ID = <10301> Status = 0 0 0 0 ok 2008-Apr-29 20:45:47 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-29 20:45:47 LOG5 end_task: Level: (4) ID = <10300> Status = 0 0 0 0 ok 2008-Apr-29 20:45:47 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-29 20:45:47 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-29 20:45:47 LOG5 finish_task: Level: (3) ID = <10291> Status = 0 0 0 0 ok 2008-Apr-29 20:45:47 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-29 20:45:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 20:45:47 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-29 20:45:47 LOG5 end_task: Level: (3) ID = <10291> Status = 0 0 0 0 ok 2008-Apr-29 20:45:47 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-29 20:45:48 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 113.28 and ZA = 14.72 2008-Apr-29 20:45:48 LOG3 track_source: Calling 'track_source AGES3193_p1_012 113.28 14.7196408976 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-29 20:45:48 START begin_task: Starting task 'sending tracking commands' 2008-Apr-29 20:45:48 LOG5 begin_task: Level: (3) ID = <10302> Status = 0 0 0 0 ok 2008-Apr-29 20:45:48 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p1_012} INFO {Slewing to source 'AGES3193_p1_012' ...} 2008-Apr-29 20:45:48 INFO1 track_source: Starting to track AGES3193_p1_012 2008-Apr-29 20:45:48 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p1_012" 2008-Apr-29 20:45:48 LOG3 vw_send: To DATATAKING: set ra 113.28 2008-Apr-29 20:45:48 LOG3 vw_send: To DATATAKING: set dec 14.7196408976 2008-Apr-29 20:45:48 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-29 20:45:48 LOG3 vw_send: To DATATAKING: pnt tr 113.28 14.7196408976 -CF 2008-Apr-29 20:45:48 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-29 20:45:48 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-29 20:45:48 LOG5 finish_task: Level: (3) ID = <10302> Status = 0 0 0 0 ok 2008-Apr-29 20:45:48 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-29 20:45:48 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 20:45:48 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-29 20:45:48 LOG5 end_task: Level: (3) ID = <10302> Status = 0 0 0 0 ok 2008-Apr-29 20:45:48 LOG1 fixed_driftmap: Parameters: HA = +00:59:00.6 Start = 10:52:30.0 LST = 10:52:07.1 diff = 22.8 secs 2008-Apr-29 20:45:48 INFO2 fixed_driftmap: Waiting 20.8 seconds for RA 9:53:29 2008-Apr-29 20:45:48 INFO2 lstwait: Waiting for 20.8 secs from LST 10:52:07 to LST 10:52:28 ... 2008-Apr-29 20:45:48 LOG4 send_obs_status: To obs_status: <1> TASKTIME 20.7759201174174 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-29 20:45:48 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-29 20:45:48 LOG5 begin_task: Level: (3) ID = <10303> Status = 0 0 0 0 ok 2008-Apr-29 20:45:48 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p1_012" 2008-Apr-29 20:45:48 LOG4 got_cormsg: From DATATAKING: set ra 113.28 2008-Apr-29 20:45:48 LOG4 got_cormsg: From DATATAKING: set dec 14.7196408976 2008-Apr-29 20:45:48 LOG4 got_cormsg: From DATATAKING: vw% 113.28 2008-Apr-29 20:45:48 LOG4 got_cormsg: From DATATAKING: vw% 14.7196408976 2008-Apr-29 20:45:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 20:45:48 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-29 20:45:48 LOG4 got_cormsg: From DATATAKING: pnt tr 113.28 14.7196408976 -CF 2008-Apr-29 20:45:48 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-29 20:45:48 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-29 20:45:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 20:45:52 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.884 and 1.118 2008-Apr-29 20:46:09 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-29 20:46:09 LOG5 end_task: Level: (3) ID = <10303> Status = 0 0 0 0 ok 2008-Apr-29 20:46:09 LOG4 lstwait: Finished waiting, the gui caused difference: 0.22719800000388091 2008-Apr-29 20:46:09 INFO3 lstwait: Finished waiting 2008-Apr-29 20:46:09 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-29 20:46:09 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-29 20:46:09 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-29 20:46:09 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-29 20:46:09 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-29 20:46:09 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-29 20:46:09 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-29 20:46:09 LOG5 begin_task: Level: (3) ID = <10304> Status = 0 0 0 0 ok 2008-Apr-29 20:46:09 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-29 20:46:09 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-29 20:46:09 INFO2 take_spectra: Starting WAPP scan: 812000129 2008-Apr-29 20:46:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-29 20:46:09 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-29 20:46:09 LOG5 begin_task: Level: (4) ID = <10305> Status = 0 0 0 0 ok 2008-Apr-29 20:46:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-29 20:46:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 2770.00 2008-Apr-29 20:46:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.112425 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-29 20:46:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.112425 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 20:46:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.112425 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 20:46:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.112425 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 20:46:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.112425 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 20:46:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.112425 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 20:46:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.112425 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 20:46:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.112425 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 20:46:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.112425 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 21:06:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-29 21:06:10 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-29 21:06:10 LOG5 end_task: Level: (4) ID = <10305> Status = 0 0 0 0 ok 2008-Apr-29 21:06:10 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-29 21:06:10 LOG5 end_task: Level: (3) ID = <10304> Status = 0 0 0 0 ok 2008-Apr-29 21:06:10 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-29 21:06:10 LOG5 finish_task: Level: (2) ID = <10272> Status = 0 0 0 0 ok 2008-Apr-29 21:06:10 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-29 21:06:10 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-29 21:06:10 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-29 21:06:10 LOG5 end_task: Level: (2) ID = <10272> Status = 0 0 0 0 ok 2008-Apr-29 21:06:10 COMMAND run_command_line: EXECUTING command 31: 'FIXEDDRIFT az=312.57 alfaangle=59.5 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_058 ra=120900.00 dec=73430.00' 2008-Apr-29 21:06:11 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-29 21:06:11 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-29 21:06:11 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 312.57 59.5 hcorcal 5 tracking no first 1 AGESVC1A_p2_058 120900.00 73430.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-29 21:06:11 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-29 21:06:11 LOG5 begin_task: Level: (2) ID = <10306> Status = 0 0 0 0 ok 2008-Apr-29 21:06:11 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES3193_p1_012' 2008-Apr-29 21:06:11 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-29 21:06:11 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1A_p2_058} 2008-Apr-29 21:06:11 INFO3 fixed_driftmap: Sending telescope to Az = 312.57 and ZA = 15.57 2008-Apr-29 21:06:11 LOG3 track_source: Calling 'track_source AGESVC1A_p2_058 312.57 15.5702283435 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-29 21:06:11 START begin_task: Starting task 'sending tracking commands' 2008-Apr-29 21:06:11 LOG5 begin_task: Level: (3) ID = <10307> Status = 0 0 0 0 ok 2008-Apr-29 21:06:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_058} INFO {Slewing to source 'AGESVC1A_p2_058' ...} 2008-Apr-29 21:06:11 INFO1 track_source: Starting to track AGESVC1A_p2_058 2008-Apr-29 21:06:11 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_058" 2008-Apr-29 21:06:11 LOG3 vw_send: To DATATAKING: set ra 312.57 2008-Apr-29 21:06:11 LOG3 vw_send: To DATATAKING: set dec 15.5702283435 2008-Apr-29 21:06:11 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-29 21:06:11 LOG3 vw_send: To DATATAKING: pnt tr 312.57 15.5702283435 -CF 2008-Apr-29 21:06:11 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-29 21:06:11 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-29 21:06:11 LOG5 finish_task: Level: (3) ID = <10307> Status = 0 0 0 0 ok 2008-Apr-29 21:06:11 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-29 21:06:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 21:06:11 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-29 21:06:11 LOG5 end_task: Level: (3) ID = <10307> Status = 0 0 0 0 ok 2008-Apr-29 21:06:11 START begin_task: Starting task 'rotate ALFA to +59.5 degrees' 2008-Apr-29 21:06:11 LOG5 begin_task: Level: (3) ID = <10308> Status = 0 0 0 0 ok 2008-Apr-29 21:06:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +59.5 degrees ...} 2008-Apr-29 21:06:11 INFO2 rotate_alfa: ALFA commanded to +59.5 degrees 2008-Apr-29 21:06:11 LOG3 sock_errsend: To ALFAMOTOR: POSITION 59.5 REPLY 2008-Apr-29 21:06:11 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-29 21:06:11 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-29 21:06:11 LOG5 begin_task: Level: (4) ID = <10309> Status = 0 0 0 0 ok 2008-Apr-29 21:06:11 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_058" 2008-Apr-29 21:06:11 LOG4 got_cormsg: From DATATAKING: set ra 312.57 2008-Apr-29 21:06:11 LOG4 got_cormsg: From DATATAKING: set dec 15.5702283435 2008-Apr-29 21:06:11 LOG4 got_cormsg: From DATATAKING: vw% 312.57 2008-Apr-29 21:06:11 LOG4 got_cormsg: From DATATAKING: vw% 15.5702283435 2008-Apr-29 21:06:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 21:06:11 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-29 21:06:11 LOG4 got_cormsg: From DATATAKING: pnt tr 312.57 15.5702283435 -CF 2008-Apr-29 21:06:11 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-29 21:06:11 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-29 21:06:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 21:06:29 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-29 21:06:29 INFO3 alfa_motor: ALFA rotator in-position +59.50 degrees 2008-Apr-29 21:06:29 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-29 21:06:29 LOG5 end_task: Level: (4) ID = <10309> Status = 0 0 0 0 ok 2008-Apr-29 21:06:29 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-29 21:06:29 STOP finish_task: Finishing task 'rotate ALFA to +59.5 degrees' 2008-Apr-29 21:06:29 LOG5 finish_task: Level: (3) ID = <10308> Status = 0 0 0 0 ok 2008-Apr-29 21:06:29 INFO2 finish_task: DONE finished configuration: rotating ALFA to +59.5 degrees 2008-Apr-29 21:06:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 21:06:29 STOP end_task: Finishing task 'rotate ALFA to +59.5 degrees' with status 'OK' 2008-Apr-29 21:06:29 LOG5 end_task: Level: (3) ID = <10308> Status = 0 0 0 0 ok 2008-Apr-29 21:06:29 START begin_task: Starting task 'waiting on telescope' 2008-Apr-29 21:06:29 LOG5 begin_task: Level: (3) ID = <10310> Status = 0 0 0 0 ok 2008-Apr-29 21:06:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-29 21:06:29 LOG3 waittrk: Start waittrk 5 2008-Apr-29 21:06:29 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-29 21:06:29 LOG5 begin_task: Level: (4) ID = <10311> Status = 0 0 0 0 ok 2008-Apr-29 21:06:34 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-29 21:06:34 LOG5 end_task: Level: (4) ID = <10311> Status = 0 0 0 0 ok 2008-Apr-29 21:06:34 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-29 21:06:34 LOG5 begin_task: Level: (4) ID = <10312> Status = 0 0 0 0 ok 2008-Apr-29 21:14:26 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-29 21:14:26 LOG5 end_task: Level: (4) ID = <10312> Status = 0 0 0 0 ok 2008-Apr-29 21:14:26 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-29 21:14:26 INFO2 waittrk: Now tracking AGESVC1A_p2_058 2008-Apr-29 21:14:26 LOG4 waittrk: Current telescope position: Az = 312.19 ZA = 15.56 2008-Apr-29 21:14:26 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-29 21:14:26 LOG5 finish_task: Level: (3) ID = <10310> Status = 0 0 0 0 ok 2008-Apr-29 21:14:26 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-29 21:14:26 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 21:14:26 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-29 21:14:26 LOG5 end_task: Level: (3) ID = <10310> Status = 0 0 0 0 ok 2008-Apr-29 21:14:26 START begin_task: Starting task 'selecting calibration type' 2008-Apr-29 21:14:26 LOG5 begin_task: Level: (3) ID = <10313> Status = 0 0 0 0 ok 2008-Apr-29 21:14:26 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-29 21:14:26 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-29 21:14:26 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 21:14:26 START begin_task: Starting task 'waiting on setcal' 2008-Apr-29 21:14:26 LOG5 begin_task: Level: (4) ID = <10314> Status = 0 0 0 0 ok 2008-Apr-29 21:14:26 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-29 21:14:26 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 21:14:27 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 21:14:27 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-29 21:14:27 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-29 21:14:27 LOG5 end_task: Level: (4) ID = <10314> Status = 0 0 0 0 ok 2008-Apr-29 21:14:27 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-29 21:14:27 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-29 21:14:27 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-29 21:14:27 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-29 21:14:27 LOG5 begin_task: Level: (4) ID = <10315> Status = 0 0 0 0 ok 2008-Apr-29 21:14:27 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 21:14:27 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-29 21:14:27 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-29 21:14:27 LOG5 end_task: Level: (4) ID = <10315> Status = 0 0 0 0 ok 2008-Apr-29 21:14:27 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-29 21:14:27 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-29 21:14:27 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-29 21:14:27 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-29 21:14:27 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-29 21:14:27 LOG5 begin_task: Level: (4) ID = <10316> Status = 0 0 0 0 ok 2008-Apr-29 21:14:27 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-29 21:14:27 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-29 21:14:27 LOG5 end_task: Level: (4) ID = <10316> Status = 0 0 0 0 ok 2008-Apr-29 21:14:27 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-29 21:14:27 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-29 21:14:27 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-29 21:14:27 LOG5 finish_task: Level: (3) ID = <10313> Status = 0 0 0 0 ok 2008-Apr-29 21:14:27 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-29 21:14:27 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 21:14:27 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-29 21:14:27 LOG5 end_task: Level: (3) ID = <10313> Status = 0 0 0 0 ok 2008-Apr-29 21:14:27 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2008-Apr-29 21:14:27 INFO2 astwait: Waiting for 95 seconds from 01:14:27 to 01:16:02 UTC ... 2008-Apr-29 21:14:27 LOG4 send_obs_status: To obs_status: <1> TASKTIME 95 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-29 21:14:27 START begin_task: Starting task 'waiting on waiting for AST time' 2008-Apr-29 21:14:27 LOG5 begin_task: Level: (3) ID = <10317> Status = 0 0 0 0 ok 2008-Apr-29 21:15:27 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 21:15:27.302 (seconds: 76527.302)!} 2008-Apr-29 21:15:27 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 21:15:27.302 (seconds: 76527.302)! 2008-Apr-29 21:16:02 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2008-Apr-29 21:16:02 LOG5 end_task: Level: (3) ID = <10317> Status = 0 0 0 0 ok 2008-Apr-29 21:16:02 INFO3 astwait: Finished waiting 2008-Apr-29 21:16:02 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-29 21:16:02 LOG5 dopset_later: Calling 'dopset_later 60.500030608736132' 2008-Apr-29 21:16:02 INFO3 dopset_later: Setting Doppler correction for 21:17:02 (60.5 seconds from now) 2008-Apr-29 21:16:02 LOG5 antvel: Calling 'antvel 312.570000 15.570228 F 60.500030608736132' 2008-Apr-29 21:16:02 LOG2 antvel: Parameters to Doppler: Heliocentric 91022 2008 120 0.0 2008-Apr-29 21:16:02 INFO5 antvel: Computed antenna velocity: +18.75900 km/s 2008-Apr-29 21:16:02 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=18.7590021211 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-29 21:16:02 INFO4 dopset_gen: New sky frequencies: 1381.157005 1381.157005 1381.157005 1381.157005 1381.157005 1381.157005 1381.157005 1381.157005 1381.157005 2008-Apr-29 21:16:02 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.157005 sky0=1381.157005 sky1=1381.157005 sky2=1381.157005 sky3=1381.157005 sky4=1381.157005 sky5=1381.157005 sky6=1381.157005 sky7=1381.157005 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-29 21:16:02 LOG2 dopset_gen: Result from 'sky2syn': 1631.157005 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-29 21:16:02 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631157005.0} 2008-Apr-29 21:16:02 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 21:16:02 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-29 21:16:02 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-29 21:16:02 INFO5 fixed_driftmap: Tracking J2000 position: RA = 12:08:03.9 Dec = +07:34:21.8 2008-Apr-29 21:16:02 LOG3 track_source: Calling 'track_source AGESVC1A_p2_058 120803.9 073421.8 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-29 21:16:02 START begin_task: Starting task 'sending tracking commands' 2008-Apr-29 21:16:02 LOG5 begin_task: Level: (3) ID = <10318> Status = 0 0 0 0 ok 2008-Apr-29 21:16:02 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_058} INFO {Slewing to source 'AGESVC1A_p2_058' ...} 2008-Apr-29 21:16:02 INFO1 track_source: Starting to track AGESVC1A_p2_058 2008-Apr-29 21:16:02 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_058" 2008-Apr-29 21:16:02 LOG3 vw_send: To DATATAKING: set ra 120803.9 2008-Apr-29 21:16:02 LOG3 vw_send: To DATATAKING: set dec 073421.8 2008-Apr-29 21:16:02 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-29 21:16:02 LOG3 vw_send: To DATATAKING: pnt tr 120803.9 073421.8 -CJ 2008-Apr-29 21:16:02 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-29 21:16:02 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-29 21:16:02 LOG5 finish_task: Level: (3) ID = <10318> Status = 0 0 0 0 ok 2008-Apr-29 21:16:02 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-29 21:16:02 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 21:16:02 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-29 21:16:02 LOG5 end_task: Level: (3) ID = <10318> Status = 0 0 0 0 ok 2008-Apr-29 21:16:02 START begin_task: Starting task 'waiting on telescope' 2008-Apr-29 21:16:02 LOG5 begin_task: Level: (3) ID = <10319> Status = 0 0 0 0 ok 2008-Apr-29 21:16:02 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-29 21:16:02 LOG3 waittrk: Start waittrk 5 2008-Apr-29 21:16:02 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-29 21:16:02 LOG5 begin_task: Level: (4) ID = <10320> Status = 0 0 0 0 ok 2008-Apr-29 21:16:02 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631157005.0} 2008-Apr-29 21:16:02 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 21:16:02 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_058" 2008-Apr-29 21:16:02 LOG4 got_cormsg: From DATATAKING: set ra 120803.9 2008-Apr-29 21:16:02 LOG4 got_cormsg: From DATATAKING: set dec 073421.8 2008-Apr-29 21:16:02 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-29 21:16:02 LOG4 got_cormsg: From DATATAKING: vw% 120803.9 2008-Apr-29 21:16:02 LOG4 got_cormsg: From DATATAKING: vw% 073421.8 2008-Apr-29 21:16:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 21:16:02 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-29 21:16:02 LOG4 got_cormsg: From DATATAKING: pnt tr 120803.9 073421.8 -CJ 2008-Apr-29 21:16:02 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-29 21:16:02 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-29 21:16:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 21:16:07 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-29 21:16:07 LOG5 end_task: Level: (4) ID = <10320> Status = 0 0 0 0 ok 2008-Apr-29 21:16:07 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-29 21:16:07 LOG5 begin_task: Level: (4) ID = <10321> Status = 0 0 0 0 ok 2008-Apr-29 21:16:09 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-29 21:16:09 LOG5 end_task: Level: (4) ID = <10321> Status = 0 0 0 0 ok 2008-Apr-29 21:16:09 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-29 21:16:09 INFO2 waittrk: Now tracking AGESVC1A_p2_058 2008-Apr-29 21:16:09 LOG4 waittrk: Current telescope position: Az = 312.24 ZA = 15.55 2008-Apr-29 21:16:09 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-29 21:16:09 LOG5 finish_task: Level: (3) ID = <10319> Status = 0 0 0 0 ok 2008-Apr-29 21:16:09 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-29 21:16:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 21:16:09 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-29 21:16:09 LOG5 end_task: Level: (3) ID = <10319> Status = 0 0 0 0 ok 2008-Apr-29 21:16:09 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-29 21:16:09 LOG5 begin_task: Level: (3) ID = <10322> Status = 0 0 0 0 ok 2008-Apr-29 21:16:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-29 21:16:09 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-29 21:16:09 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-29 21:16:09 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-29 21:16:09 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 21:16:09 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-29 21:16:09 LOG5 begin_task: Level: (4) ID = <10323> Status = 0 0 0 0 ok 2008-Apr-29 21:16:09 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-29 21:16:09 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 21:16:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 21:16:12 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-29 21:16:12 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-29 21:16:12 LOG5 end_task: Level: (4) ID = <10323> Status = 0 0 0 0 ok 2008-Apr-29 21:16:12 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-29 21:16:12 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-29 21:16:12 LOG5 begin_task: Level: (4) ID = <10324> Status = 0 0 0 0 ok 2008-Apr-29 21:16:12 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-29 21:16:12 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-29 21:16:12 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-29 21:16:12 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-29 21:16:12 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-29 21:16:12 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-29 21:16:12 LOG5 begin_task: Level: (5) ID = <10325> Status = 0 0 0 0 ok 2008-Apr-29 21:16:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 21:16:12 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-29 21:16:13 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 9 dB --- beam 1: 7 6 dB 2008-Apr-29 21:16:13 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 6 dB 2008-Apr-29 21:16:13 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-29 21:16:13 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 2 2 dB 2008-Apr-29 21:16:13 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-29 21:16:13 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-29 21:16:13 LOG5 end_task: Level: (5) ID = <10325> Status = 0 0 0 0 ok 2008-Apr-29 21:16:13 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.916 1.073 ALFA beam 1: 1.106 1.045 2008-Apr-29 21:16:13 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.031 0.944 ALFA beam 3: 0.969 1.030 2008-Apr-29 21:16:13 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.922 0.940 ALFA beam 5: 1.003 0.910 2008-Apr-29 21:16:13 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.985 1.009 ALFA beam 7: 1.069 1.122 2008-Apr-29 21:16:13 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-29 21:16:13 LOG5 finish_task: Level: (4) ID = <10324> Status = 0 0 0 0 ok 2008-Apr-29 21:16:13 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-29 21:16:13 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 21:16:13 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-29 21:16:13 LOG5 end_task: Level: (4) ID = <10324> Status = 0 0 0 0 ok 2008-Apr-29 21:16:13 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-29 21:16:13 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-29 21:16:13 LOG5 finish_task: Level: (3) ID = <10322> Status = 0 0 0 0 ok 2008-Apr-29 21:16:13 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-29 21:16:13 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 21:16:13 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-29 21:16:13 LOG5 end_task: Level: (3) ID = <10322> Status = 0 0 0 0 ok 2008-Apr-29 21:16:13 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Karen O'Neil 2008-Apr-29 21:16:13 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Karen O'Neil 2008-Apr-29 21:16:13 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Karen O'Neil 2008-Apr-29 21:16:13 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Karen O'Neil 2008-Apr-29 21:16:13 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-29 21:16:13 START begin_task: Starting task 'WAPP calibration' 2008-Apr-29 21:16:13 LOG5 begin_task: Level: (3) ID = <10326> Status = 0 0 0 0 ok 2008-Apr-29 21:16:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-29 21:16:13 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-29 21:16:13 START begin_task: Starting task 'selecting calibration type' 2008-Apr-29 21:16:13 LOG5 begin_task: Level: (4) ID = <10327> Status = 0 0 0 0 ok 2008-Apr-29 21:16:13 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-29 21:16:13 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-29 21:16:13 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 21:16:13 START begin_task: Starting task 'waiting on setcal' 2008-Apr-29 21:16:13 LOG5 begin_task: Level: (5) ID = <10328> Status = 0 0 0 0 ok 2008-Apr-29 21:16:13 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Karen O'Neil' 2008-Apr-29 21:16:13 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-29 21:16:13 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 21:16:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 21:16:14 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-29 21:16:14 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-29 21:16:14 LOG5 end_task: Level: (5) ID = <10328> Status = 0 0 0 0 ok 2008-Apr-29 21:16:14 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-29 21:16:14 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-29 21:16:14 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-29 21:16:14 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-29 21:16:14 LOG5 begin_task: Level: (5) ID = <10329> Status = 0 0 0 0 ok 2008-Apr-29 21:16:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 21:16:14 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-29 21:16:14 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-29 21:16:14 LOG5 end_task: Level: (5) ID = <10329> Status = 0 0 0 0 ok 2008-Apr-29 21:16:14 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-29 21:16:14 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-29 21:16:14 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-29 21:16:14 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-29 21:16:14 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-29 21:16:14 LOG5 begin_task: Level: (5) ID = <10330> Status = 0 0 0 0 ok 2008-Apr-29 21:16:14 NOTE WAPPDATA-new_file: New FITS file: wapp.20080429.a2048.0007.fits 2008-Apr-29 21:16:14 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-29 21:16:14 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-29 21:16:14 LOG5 end_task: Level: (5) ID = <10330> Status = 0 0 0 0 ok 2008-Apr-29 21:16:14 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-29 21:16:14 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-29 21:16:14 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-29 21:16:14 LOG5 finish_task: Level: (4) ID = <10327> Status = 0 0 0 0 ok 2008-Apr-29 21:16:14 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-29 21:16:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 21:16:14 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-29 21:16:14 LOG5 end_task: Level: (4) ID = <10327> Status = 0 0 0 0 ok 2008-Apr-29 21:16:14 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-29 21:16:14 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-29 21:16:14 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-29 21:16:14 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-29 21:16:14 LOG5 begin_task: Level: (4) ID = <10331> Status = 0 0 0 0 ok 2008-Apr-29 21:16:14 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080429.a2048.0007.fits} 2008-Apr-29 21:16:14 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-29 21:16:14 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-29 21:16:14 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-29 21:16:14 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-29 21:16:14 LOG5 end_task: Level: (4) ID = <10331> Status = 0 0 0 0 ok 2008-Apr-29 21:16:14 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-29 21:16:14 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-29 21:16:14 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-29 21:16:14 LOG5 begin_task: Level: (4) ID = <10332> Status = 0 0 0 0 ok 2008-Apr-29 21:16:14 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-29 21:16:14 LOG5 log_alfabeam: Parameters: 12.134416666666665 7.5727222222222226 11.377537 2008.3309685780921 59.499908 2008-Apr-29 21:16:14 LOG4 log_alfabeam: ALFABEAM 0 12.134416666666658 7.572722222222225 2008-Apr-29 21:16:14 LOG4 log_alfabeam: ALFABEAM 1 12.132156734323075 7.670212220237980 2008-Apr-29 21:16:14 LOG4 log_alfabeam: ALFABEAM 2 12.127859060801947 7.605588382811853 2008-Apr-29 21:16:14 LOG4 log_alfabeam: ALFABEAM 3 12.130081852271633 7.507910294779102 2008-Apr-29 21:16:14 LOG4 log_alfabeam: ALFABEAM 4 12.136644504688407 7.474950814920782 2008-Apr-29 21:16:14 LOG4 log_alfabeam: ALFABEAM 5 12.140992454285399 7.540306564508485 2008-Apr-29 21:16:14 LOG4 log_alfabeam: ALFABEAM 6 12.138727457031418 7.637889522628193 2008-Apr-29 21:16:14 INFO2 take_spectra: Starting WAPP scan: 812000130 2008-Apr-29 21:16:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-29 21:16:15 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-29 21:16:15 LOG5 begin_task: Level: (5) ID = <10333> Status = 0 0 0 0 ok 2008-Apr-29 21:16:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-29 21:16:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 4576.00 2008-Apr-29 21:16:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.157005 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-29 21:16:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.157005 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 21:16:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.157005 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 21:16:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.157005 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 21:16:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.157005 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 21:16:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.157005 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 21:16:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.157005 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 21:16:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.157005 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 21:16:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.157005 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 21:16:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-29 21:16:21 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-29 21:16:21 LOG5 end_task: Level: (5) ID = <10333> Status = 0 0 0 0 ok 2008-Apr-29 21:16:21 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-29 21:16:21 LOG5 end_task: Level: (4) ID = <10332> Status = 0 0 0 0 ok 2008-Apr-29 21:16:21 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-29 21:16:21 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-29 21:16:21 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-29 21:16:21 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-29 21:16:21 LOG5 begin_task: Level: (4) ID = <10334> Status = 0 0 0 0 ok 2008-Apr-29 21:16:22 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-29 21:16:22 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-29 21:16:22 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-29 21:16:22 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-29 21:16:22 LOG5 end_task: Level: (4) ID = <10334> Status = 0 0 0 0 ok 2008-Apr-29 21:16:22 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-29 21:16:22 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-29 21:16:22 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-29 21:16:22 LOG5 begin_task: Level: (4) ID = <10335> Status = 0 0 0 0 ok 2008-Apr-29 21:16:22 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-29 21:16:22 LOG5 log_alfabeam: Parameters: 12.134416666666665 7.5727222222222226 11.379487 2008.3309687999088 59.499908 2008-Apr-29 21:16:22 LOG4 log_alfabeam: ALFABEAM 0 12.134416666666658 7.572722222222221 2008-Apr-29 21:16:22 LOG4 log_alfabeam: ALFABEAM 1 12.132164765397658 7.670253206793938 2008-Apr-29 21:16:22 LOG4 log_alfabeam: ALFABEAM 2 12.127861791895540 7.605708386652453 2008-Apr-29 21:16:22 LOG4 log_alfabeam: ALFABEAM 3 12.130076487461752 7.507989724987831 2008-Apr-29 21:16:22 LOG4 log_alfabeam: ALFABEAM 4 12.136636410899120 7.474910030160575 2008-Apr-29 21:16:22 LOG4 log_alfabeam: ALFABEAM 5 12.140989785491069 7.540186880597114 2008-Apr-29 21:16:22 LOG4 log_alfabeam: ALFABEAM 6 12.138732817091544 7.637811035277084 2008-Apr-29 21:16:22 INFO2 take_spectra: Starting WAPP scan: 812000131 2008-Apr-29 21:16:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-29 21:16:22 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-29 21:16:22 LOG5 begin_task: Level: (5) ID = <10336> Status = 0 0 0 0 ok 2008-Apr-29 21:16:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-29 21:16:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 4583.00 2008-Apr-29 21:16:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.549 > 1.4)! 2008-Apr-29 21:16:27 LOG4 check_wapp_levels: WAPP-1 power levels: 1.260 1.438 1.489 1.405 2008-Apr-29 21:16:27 LOG4 check_wapp_levels: WAPP-2 power levels: 1.386 1.286 1.319 1.398 2008-Apr-29 21:16:27 LOG4 check_wapp_levels: WAPP-3 power levels: 1.265 1.290 1.377 1.205 2008-Apr-29 21:16:27 LOG4 check_wapp_levels: WAPP-4 power levels: 1.372 1.395 1.494 1.549 2008-Apr-29 21:16:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.157005 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-29 21:16:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.157005 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 21:16:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.157005 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 21:16:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.157005 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 21:16:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.157005 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 21:16:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.157005 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 21:16:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.157005 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 21:16:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.157005 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 21:16:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.157005 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 21:16:28 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-29 21:16:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-29 21:16:28 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-29 21:16:28 LOG5 end_task: Level: (5) ID = <10336> Status = 0 0 0 0 ok 2008-Apr-29 21:16:28 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-29 21:16:28 LOG5 end_task: Level: (4) ID = <10335> Status = 0 0 0 0 ok 2008-Apr-29 21:16:28 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-29 21:16:28 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-29 21:16:28 LOG5 finish_task: Level: (3) ID = <10326> Status = 0 0 0 0 ok 2008-Apr-29 21:16:28 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-29 21:16:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 21:16:28 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-29 21:16:28 LOG5 end_task: Level: (3) ID = <10326> Status = 0 0 0 0 ok 2008-Apr-29 21:16:29 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-29 21:16:29 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 312.57 and ZA = 15.57 2008-Apr-29 21:16:29 LOG3 track_source: Calling 'track_source AGESVC1A_p2_058 312.57 15.5702283435 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-29 21:16:29 START begin_task: Starting task 'sending tracking commands' 2008-Apr-29 21:16:29 LOG5 begin_task: Level: (3) ID = <10337> Status = 0 0 0 0 ok 2008-Apr-29 21:16:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_058} INFO {Slewing to source 'AGESVC1A_p2_058' ...} 2008-Apr-29 21:16:29 INFO1 track_source: Starting to track AGESVC1A_p2_058 2008-Apr-29 21:16:29 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_058" 2008-Apr-29 21:16:29 LOG3 vw_send: To DATATAKING: set ra 312.57 2008-Apr-29 21:16:29 LOG3 vw_send: To DATATAKING: set dec 15.5702283435 2008-Apr-29 21:16:29 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-29 21:16:29 LOG3 vw_send: To DATATAKING: pnt tr 312.57 15.5702283435 -CF 2008-Apr-29 21:16:29 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-29 21:16:29 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-29 21:16:29 LOG5 finish_task: Level: (3) ID = <10337> Status = 0 0 0 0 ok 2008-Apr-29 21:16:29 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-29 21:16:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 21:16:29 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-29 21:16:29 LOG5 end_task: Level: (3) ID = <10337> Status = 0 0 0 0 ok 2008-Apr-29 21:16:29 LOG1 fixed_driftmap: Parameters: HA = -00:46:00.4 Start = 11:23:26.8 LST = 11:22:53.2 diff = 33.6 secs 2008-Apr-29 21:16:29 INFO2 fixed_driftmap: Waiting 31.6 seconds for RA 12:09:27 2008-Apr-29 21:16:29 INFO2 lstwait: Waiting for 31.5 secs from LST 11:22:53 to LST 11:23:25 ... 2008-Apr-29 21:16:29 LOG4 send_obs_status: To obs_status: <1> TASKTIME 31.507408797531145 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-29 21:16:29 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-29 21:16:29 LOG5 begin_task: Level: (3) ID = <10338> Status = 0 0 0 0 ok 2008-Apr-29 21:16:29 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_058" 2008-Apr-29 21:16:29 LOG4 got_cormsg: From DATATAKING: set ra 312.57 2008-Apr-29 21:16:29 LOG4 got_cormsg: From DATATAKING: set dec 15.5702283435 2008-Apr-29 21:16:29 LOG4 got_cormsg: From DATATAKING: vw% 312.57 2008-Apr-29 21:16:29 LOG4 got_cormsg: From DATATAKING: vw% 15.5702283435 2008-Apr-29 21:16:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 21:16:29 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-29 21:16:29 LOG4 got_cormsg: From DATATAKING: pnt tr 312.57 15.5702283435 -CF 2008-Apr-29 21:16:29 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-29 21:16:29 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-29 21:16:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 21:16:33 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.912 and 1.121 2008-Apr-29 21:17:00 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-29 21:17:00 LOG5 end_task: Level: (3) ID = <10338> Status = 0 0 0 0 ok 2008-Apr-29 21:17:00 LOG4 lstwait: Finished waiting, the gui caused difference: 0.4967278399995223 2008-Apr-29 21:17:00 INFO3 lstwait: Finished waiting 2008-Apr-29 21:17:00 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-29 21:17:00 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-29 21:17:00 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-29 21:17:00 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-29 21:17:00 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-29 21:17:01 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-29 21:17:01 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-29 21:17:01 LOG5 begin_task: Level: (3) ID = <10339> Status = 0 0 0 0 ok 2008-Apr-29 21:17:01 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-29 21:17:01 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-29 21:17:01 INFO2 take_spectra: Starting WAPP scan: 812000132 2008-Apr-29 21:17:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-29 21:17:01 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-29 21:17:01 LOG5 begin_task: Level: (4) ID = <10340> Status = 0 0 0 0 ok 2008-Apr-29 21:17:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-29 21:17:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 4622.00 2008-Apr-29 21:17:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.157005 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-29 21:17:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.157005 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 21:17:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.157005 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 21:17:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.157005 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 21:17:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.157005 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 21:17:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.157005 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 21:17:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.157005 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 21:17:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.157005 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 21:17:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.157005 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 21:37:02 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-29 21:37:02 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-29 21:37:02 LOG5 end_task: Level: (4) ID = <10340> Status = 0 0 0 0 ok 2008-Apr-29 21:37:02 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-29 21:37:02 LOG5 end_task: Level: (3) ID = <10339> Status = 0 0 0 0 ok 2008-Apr-29 21:37:02 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-29 21:37:02 LOG5 finish_task: Level: (2) ID = <10306> Status = 0 0 0 0 ok 2008-Apr-29 21:37:02 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-29 21:37:02 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-29 21:37:02 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-29 21:37:02 LOG5 end_task: Level: (2) ID = <10306> Status = 0 0 0 0 ok 2008-Apr-29 21:37:02 COMMAND run_command_line: EXECUTING command 35: 'FIXEDDRIFT az=332.04 alfaangle=42.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_060 ra=120900.00 dec=73130.00' 2008-Apr-29 21:37:02 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-29 21:37:03 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-29 21:37:03 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 332.04 42.4 hcorcal 5 tracking no first 1 AGESVC1A_p2_060 120900.00 73130.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-29 21:37:03 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-29 21:37:03 LOG5 begin_task: Level: (2) ID = <10341> Status = 0 0 0 0 ok 2008-Apr-29 21:37:03 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGESVC1A_p2_058' 2008-Apr-29 21:37:03 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-29 21:37:03 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1A_p2_060} 2008-Apr-29 21:37:03 INFO3 fixed_driftmap: Sending telescope to Az = 332.04 and ZA = 12.23 2008-Apr-29 21:37:03 LOG3 track_source: Calling 'track_source AGESVC1A_p2_060 332.04 12.2318653039 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-29 21:37:03 START begin_task: Starting task 'sending tracking commands' 2008-Apr-29 21:37:03 LOG5 begin_task: Level: (3) ID = <10342> Status = 0 0 0 0 ok 2008-Apr-29 21:37:03 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_060} INFO {Slewing to source 'AGESVC1A_p2_060' ...} 2008-Apr-29 21:37:03 INFO1 track_source: Starting to track AGESVC1A_p2_060 2008-Apr-29 21:37:03 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_060" 2008-Apr-29 21:37:03 LOG3 vw_send: To DATATAKING: set ra 332.04 2008-Apr-29 21:37:03 LOG3 vw_send: To DATATAKING: set dec 12.2318653039 2008-Apr-29 21:37:03 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-29 21:37:03 LOG3 vw_send: To DATATAKING: pnt tr 332.04 12.2318653039 -CF 2008-Apr-29 21:37:03 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-29 21:37:03 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-29 21:37:03 LOG5 finish_task: Level: (3) ID = <10342> Status = 0 0 0 0 ok 2008-Apr-29 21:37:03 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-29 21:37:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 21:37:03 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-29 21:37:03 LOG5 end_task: Level: (3) ID = <10342> Status = 0 0 0 0 ok 2008-Apr-29 21:37:03 START begin_task: Starting task 'rotate ALFA to +42.4 degrees' 2008-Apr-29 21:37:03 LOG5 begin_task: Level: (3) ID = <10343> Status = 0 0 0 0 ok 2008-Apr-29 21:37:03 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +42.4 degrees ...} 2008-Apr-29 21:37:03 INFO2 rotate_alfa: ALFA commanded to +42.4 degrees 2008-Apr-29 21:37:03 LOG3 sock_errsend: To ALFAMOTOR: POSITION 42.4 REPLY 2008-Apr-29 21:37:03 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-29 21:37:03 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-29 21:37:03 LOG5 begin_task: Level: (4) ID = <10344> Status = 0 0 0 0 ok 2008-Apr-29 21:37:03 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_060" 2008-Apr-29 21:37:03 LOG4 got_cormsg: From DATATAKING: set ra 332.04 2008-Apr-29 21:37:03 LOG4 got_cormsg: From DATATAKING: set dec 12.2318653039 2008-Apr-29 21:37:03 LOG4 got_cormsg: From DATATAKING: vw% 332.04 2008-Apr-29 21:37:03 LOG4 got_cormsg: From DATATAKING: vw% 12.2318653039 2008-Apr-29 21:37:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 21:37:03 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-29 21:37:03 LOG4 got_cormsg: From DATATAKING: pnt tr 332.04 12.2318653039 -CF 2008-Apr-29 21:37:03 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-29 21:37:03 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-29 21:37:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 21:37:14 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-29 21:37:14 INFO3 alfa_motor: ALFA rotator in-position +42.40 degrees 2008-Apr-29 21:37:14 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-29 21:37:14 LOG5 end_task: Level: (4) ID = <10344> Status = 0 0 0 0 ok 2008-Apr-29 21:37:14 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-29 21:37:14 STOP finish_task: Finishing task 'rotate ALFA to +42.4 degrees' 2008-Apr-29 21:37:14 LOG5 finish_task: Level: (3) ID = <10343> Status = 0 0 0 0 ok 2008-Apr-29 21:37:14 INFO2 finish_task: DONE finished configuration: rotating ALFA to +42.4 degrees 2008-Apr-29 21:37:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 21:37:14 STOP end_task: Finishing task 'rotate ALFA to +42.4 degrees' with status 'OK' 2008-Apr-29 21:37:14 LOG5 end_task: Level: (3) ID = <10343> Status = 0 0 0 0 ok 2008-Apr-29 21:37:14 START begin_task: Starting task 'waiting on telescope' 2008-Apr-29 21:37:14 LOG5 begin_task: Level: (3) ID = <10345> Status = 0 0 0 0 ok 2008-Apr-29 21:37:14 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-29 21:37:14 LOG3 waittrk: Start waittrk 5 2008-Apr-29 21:37:14 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-29 21:37:14 LOG5 begin_task: Level: (4) ID = <10346> Status = 0 0 0 0 ok 2008-Apr-29 21:37:19 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-29 21:37:19 LOG5 end_task: Level: (4) ID = <10346> Status = 0 0 0 0 ok 2008-Apr-29 21:37:19 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-29 21:37:19 LOG5 begin_task: Level: (4) ID = <10347> Status = 0 0 0 0 ok 2008-Apr-29 21:38:33 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-29 21:38:33 LOG5 end_task: Level: (4) ID = <10347> Status = 0 0 0 0 ok 2008-Apr-29 21:38:33 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-29 21:38:33 INFO2 waittrk: Now tracking AGESVC1A_p2_060 2008-Apr-29 21:38:33 LOG4 waittrk: Current telescope position: Az = 331.66 ZA = 12.21 2008-Apr-29 21:38:33 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-29 21:38:33 LOG5 finish_task: Level: (3) ID = <10345> Status = 0 0 0 0 ok 2008-Apr-29 21:38:33 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-29 21:38:33 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 21:38:33 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-29 21:38:33 LOG5 end_task: Level: (3) ID = <10345> Status = 0 0 0 0 ok 2008-Apr-29 21:38:33 START begin_task: Starting task 'selecting calibration type' 2008-Apr-29 21:38:33 LOG5 begin_task: Level: (3) ID = <10348> Status = 0 0 0 0 ok 2008-Apr-29 21:38:33 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-29 21:38:33 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-29 21:38:33 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 21:38:33 START begin_task: Starting task 'waiting on setcal' 2008-Apr-29 21:38:33 LOG5 begin_task: Level: (4) ID = <10349> Status = 0 0 0 0 ok 2008-Apr-29 21:38:33 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-29 21:38:33 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 21:38:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 21:38:34 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-29 21:38:34 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-29 21:38:34 LOG5 end_task: Level: (4) ID = <10349> Status = 0 0 0 0 ok 2008-Apr-29 21:38:34 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-29 21:38:34 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-29 21:38:34 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-29 21:38:34 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-29 21:38:34 LOG5 begin_task: Level: (4) ID = <10350> Status = 0 0 0 0 ok 2008-Apr-29 21:38:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 21:38:34 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-29 21:38:34 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-29 21:38:34 LOG5 end_task: Level: (4) ID = <10350> Status = 0 0 0 0 ok 2008-Apr-29 21:38:35 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-29 21:38:35 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-29 21:38:35 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-29 21:38:35 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-29 21:38:35 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-29 21:38:35 LOG5 begin_task: Level: (4) ID = <10351> Status = 0 0 0 0 ok 2008-Apr-29 21:38:35 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-29 21:38:35 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-29 21:38:35 LOG5 end_task: Level: (4) ID = <10351> Status = 0 0 0 0 ok 2008-Apr-29 21:38:35 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-29 21:38:35 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-29 21:38:35 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-29 21:38:35 LOG5 finish_task: Level: (3) ID = <10348> Status = 0 0 0 0 ok 2008-Apr-29 21:38:35 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-29 21:38:35 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 21:38:35 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-29 21:38:35 LOG5 end_task: Level: (3) ID = <10348> Status = 0 0 0 0 ok 2008-Apr-29 21:38:35 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2008-Apr-29 21:38:35 INFO2 astwait: Waiting for 23 seconds from 01:38:35 to 01:38:58 UTC ... 2008-Apr-29 21:38:35 LOG4 send_obs_status: To obs_status: <1> TASKTIME 23 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-29 21:38:35 START begin_task: Starting task 'waiting on waiting for AST time' 2008-Apr-29 21:38:35 LOG5 begin_task: Level: (3) ID = <10352> Status = 0 0 0 0 ok 2008-Apr-29 21:38:58 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2008-Apr-29 21:38:58 LOG5 end_task: Level: (3) ID = <10352> Status = 0 0 0 0 ok 2008-Apr-29 21:38:58 INFO3 astwait: Finished waiting 2008-Apr-29 21:38:58 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-29 21:38:58 LOG5 dopset_later: Calling 'dopset_later 61.129033517084693' 2008-Apr-29 21:38:58 INFO3 dopset_later: Setting Doppler correction for 21:39:58 (61.1 seconds from now) 2008-Apr-29 21:38:58 LOG5 antvel: Calling 'antvel 332.040000 12.231865 F 61.129033517084693' 2008-Apr-29 21:38:58 LOG2 antvel: Parameters to Doppler: Heliocentric 92398 2008 120 0.0 2008-Apr-29 21:38:58 INFO5 antvel: Computed antenna velocity: +18.80262 km/s 2008-Apr-29 21:38:58 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=18.802617094999999 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-29 21:38:58 INFO4 dopset_gen: New sky frequencies: 1381.156804 1381.156804 1381.156804 1381.156804 1381.156804 1381.156804 1381.156804 1381.156804 1381.156804 2008-Apr-29 21:38:58 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.156804 sky0=1381.156804 sky1=1381.156804 sky2=1381.156804 sky3=1381.156804 sky4=1381.156804 sky5=1381.156804 sky6=1381.156804 sky7=1381.156804 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-29 21:38:58 LOG2 dopset_gen: Result from 'sky2syn': 1631.156804 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-29 21:38:58 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631156804.0} 2008-Apr-29 21:38:58 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 21:38:58 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-29 21:38:58 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-29 21:38:58 INFO5 fixed_driftmap: Tracking J2000 position: RA = 12:08:03.3 Dec = +07:31:21.8 2008-Apr-29 21:38:58 LOG3 track_source: Calling 'track_source AGESVC1A_p2_060 120803.3 073121.8 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-29 21:38:58 START begin_task: Starting task 'sending tracking commands' 2008-Apr-29 21:38:58 LOG5 begin_task: Level: (3) ID = <10353> Status = 0 0 0 0 ok 2008-Apr-29 21:38:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_060} INFO {Slewing to source 'AGESVC1A_p2_060' ...} 2008-Apr-29 21:38:58 INFO1 track_source: Starting to track AGESVC1A_p2_060 2008-Apr-29 21:38:58 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_060" 2008-Apr-29 21:38:58 LOG3 vw_send: To DATATAKING: set ra 120803.3 2008-Apr-29 21:38:58 LOG3 vw_send: To DATATAKING: set dec 073121.8 2008-Apr-29 21:38:58 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-29 21:38:58 LOG3 vw_send: To DATATAKING: pnt tr 120803.3 073121.8 -CJ 2008-Apr-29 21:38:58 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-29 21:38:58 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-29 21:38:58 LOG5 finish_task: Level: (3) ID = <10353> Status = 0 0 0 0 ok 2008-Apr-29 21:38:58 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-29 21:38:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 21:38:58 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-29 21:38:58 LOG5 end_task: Level: (3) ID = <10353> Status = 0 0 0 0 ok 2008-Apr-29 21:38:58 START begin_task: Starting task 'waiting on telescope' 2008-Apr-29 21:38:58 LOG5 begin_task: Level: (3) ID = <10354> Status = 0 0 0 0 ok 2008-Apr-29 21:38:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-29 21:38:58 LOG3 waittrk: Start waittrk 5 2008-Apr-29 21:38:58 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-29 21:38:58 LOG5 begin_task: Level: (4) ID = <10355> Status = 0 0 0 0 ok 2008-Apr-29 21:38:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631156804.0} 2008-Apr-29 21:38:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 21:38:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 21:38:58 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_060" 2008-Apr-29 21:38:58 LOG4 got_cormsg: From DATATAKING: set ra 120803.3 2008-Apr-29 21:38:58 LOG4 got_cormsg: From DATATAKING: set dec 073121.8 2008-Apr-29 21:38:58 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-29 21:38:58 LOG4 got_cormsg: From DATATAKING: 120803.3 2008-Apr-29 21:38:58 LOG4 got_cormsg: From DATATAKING: vw% 073121.8 2008-Apr-29 21:38:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 21:38:58 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-29 21:38:58 LOG4 got_cormsg: From DATATAKING: pnt tr 120803.3 073121.8 -CJ 2008-Apr-29 21:38:58 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-29 21:38:58 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-29 21:38:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 21:39:03 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-29 21:39:03 LOG5 end_task: Level: (4) ID = <10355> Status = 0 0 0 0 ok 2008-Apr-29 21:39:03 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-29 21:39:03 LOG5 begin_task: Level: (4) ID = <10356> Status = 0 0 0 0 ok 2008-Apr-29 21:39:05 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-29 21:39:05 LOG5 end_task: Level: (4) ID = <10356> Status = 0 0 0 0 ok 2008-Apr-29 21:39:05 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-29 21:39:05 INFO2 waittrk: Now tracking AGESVC1A_p2_060 2008-Apr-29 21:39:05 LOG4 waittrk: Current telescope position: Az = 331.73 ZA = 12.21 2008-Apr-29 21:39:05 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-29 21:39:05 LOG5 finish_task: Level: (3) ID = <10354> Status = 0 0 0 0 ok 2008-Apr-29 21:39:05 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-29 21:39:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 21:39:05 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-29 21:39:05 LOG5 end_task: Level: (3) ID = <10354> Status = 0 0 0 0 ok 2008-Apr-29 21:39:05 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-29 21:39:05 LOG5 begin_task: Level: (3) ID = <10357> Status = 0 0 0 0 ok 2008-Apr-29 21:39:05 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-29 21:39:05 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-29 21:39:05 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-29 21:39:05 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-29 21:39:05 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 21:39:05 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-29 21:39:05 LOG5 begin_task: Level: (4) ID = <10358> Status = 0 0 0 0 ok 2008-Apr-29 21:39:06 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-29 21:39:06 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 21:39:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 21:39:08 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-29 21:39:08 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-29 21:39:08 LOG5 end_task: Level: (4) ID = <10358> Status = 0 0 0 0 ok 2008-Apr-29 21:39:08 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-29 21:39:08 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-29 21:39:08 LOG5 begin_task: Level: (4) ID = <10359> Status = 0 0 0 0 ok 2008-Apr-29 21:39:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-29 21:39:08 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-29 21:39:08 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-29 21:39:08 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-29 21:39:08 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-29 21:39:09 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-29 21:39:09 LOG5 begin_task: Level: (5) ID = <10360> Status = 0 0 0 0 ok 2008-Apr-29 21:39:09 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-29 21:39:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 21:39:09 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 9 dB --- beam 1: 7 6 dB 2008-Apr-29 21:39:09 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 3 dB --- beam 5: 6 5 dB 2008-Apr-29 21:39:09 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-29 21:39:09 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 2 2 dB 2008-Apr-29 21:39:09 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-29 21:39:09 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-29 21:39:09 LOG5 end_task: Level: (5) ID = <10360> Status = 0 0 0 0 ok 2008-Apr-29 21:39:09 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.112 1.043 ALFA beam 1: 1.101 1.047 2008-Apr-29 21:39:09 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.997 0.917 ALFA beam 3: 0.929 1.001 2008-Apr-29 21:39:09 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.094 0.903 ALFA beam 5: 0.968 1.120 2008-Apr-29 21:39:09 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.965 0.990 ALFA beam 7: 1.051 1.099 2008-Apr-29 21:39:09 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-29 21:39:09 LOG5 finish_task: Level: (4) ID = <10359> Status = 0 0 0 0 ok 2008-Apr-29 21:39:09 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-29 21:39:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 21:39:09 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-29 21:39:09 LOG5 end_task: Level: (4) ID = <10359> Status = 0 0 0 0 ok 2008-Apr-29 21:39:09 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-29 21:39:09 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-29 21:39:09 LOG5 finish_task: Level: (3) ID = <10357> Status = 0 0 0 0 ok 2008-Apr-29 21:39:09 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-29 21:39:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 21:39:09 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-29 21:39:09 LOG5 end_task: Level: (3) ID = <10357> Status = 0 0 0 0 ok 2008-Apr-29 21:39:09 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Karen O'Neil 2008-Apr-29 21:39:09 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Karen O'Neil 2008-Apr-29 21:39:09 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Karen O'Neil 2008-Apr-29 21:39:09 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Karen O'Neil 2008-Apr-29 21:39:09 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-29 21:39:09 START begin_task: Starting task 'WAPP calibration' 2008-Apr-29 21:39:09 LOG5 begin_task: Level: (3) ID = <10361> Status = 0 0 0 0 ok 2008-Apr-29 21:39:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-29 21:39:09 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-29 21:39:09 START begin_task: Starting task 'selecting calibration type' 2008-Apr-29 21:39:09 LOG5 begin_task: Level: (4) ID = <10362> Status = 0 0 0 0 ok 2008-Apr-29 21:39:09 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-29 21:39:09 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-29 21:39:09 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 21:39:09 START begin_task: Starting task 'waiting on setcal' 2008-Apr-29 21:39:09 LOG5 begin_task: Level: (5) ID = <10363> Status = 0 0 0 0 ok 2008-Apr-29 21:39:09 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Karen O'Neil' 2008-Apr-29 21:39:10 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-29 21:39:10 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 21:39:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 21:39:10 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-29 21:39:10 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-29 21:39:10 LOG5 end_task: Level: (5) ID = <10363> Status = 0 0 0 0 ok 2008-Apr-29 21:39:10 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-29 21:39:10 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-29 21:39:10 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-29 21:39:10 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-29 21:39:10 LOG5 begin_task: Level: (5) ID = <10364> Status = 0 0 0 0 ok 2008-Apr-29 21:39:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 21:39:10 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-29 21:39:10 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-29 21:39:10 LOG5 end_task: Level: (5) ID = <10364> Status = 0 0 0 0 ok 2008-Apr-29 21:39:10 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-29 21:39:10 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-29 21:39:10 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-29 21:39:10 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-29 21:39:10 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-29 21:39:10 LOG5 begin_task: Level: (5) ID = <10365> Status = 0 0 0 0 ok 2008-Apr-29 21:39:10 NOTE WAPPDATA-new_file: New FITS file: wapp.20080429.a2048.0008.fits 2008-Apr-29 21:39:10 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-29 21:39:10 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-29 21:39:10 LOG5 end_task: Level: (5) ID = <10365> Status = 0 0 0 0 ok 2008-Apr-29 21:39:10 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-29 21:39:10 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-29 21:39:10 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-29 21:39:10 LOG5 finish_task: Level: (4) ID = <10362> Status = 0 0 0 0 ok 2008-Apr-29 21:39:10 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-29 21:39:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 21:39:10 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-29 21:39:10 LOG5 end_task: Level: (4) ID = <10362> Status = 0 0 0 0 ok 2008-Apr-29 21:39:10 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-29 21:39:10 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-29 21:39:10 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-29 21:39:10 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-29 21:39:10 LOG5 begin_task: Level: (4) ID = <10366> Status = 0 0 0 0 ok 2008-Apr-29 21:39:10 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080429.a2048.0008.fits} 2008-Apr-29 21:39:10 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-29 21:39:10 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-29 21:39:10 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-29 21:39:10 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-29 21:39:10 LOG5 end_task: Level: (4) ID = <10366> Status = 0 0 0 0 ok 2008-Apr-29 21:39:10 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-29 21:39:10 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-29 21:39:10 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-29 21:39:10 LOG5 begin_task: Level: (4) ID = <10367> Status = 0 0 0 0 ok 2008-Apr-29 21:39:10 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-29 21:39:10 LOG5 log_alfabeam: Parameters: 12.13425 7.5227222222222228 11.760806 2008.3310121809009 42.399986 2008-Apr-29 21:39:10 LOG4 log_alfabeam: ALFABEAM 0 12.134249999999994 7.522722222222224 2008-Apr-29 21:39:10 LOG4 log_alfabeam: ALFABEAM 1 12.132294384916881 7.624653033275188 2008-Apr-29 21:39:10 LOG4 log_alfabeam: ALFABEAM 2 12.128047331915308 7.557301042517668 2008-Apr-29 21:39:10 LOG4 log_alfabeam: ALFABEAM 3 12.129952361407199 7.455150095192462 2008-Apr-29 21:39:10 LOG4 log_alfabeam: ALFABEAM 4 12.136183923341264 7.420670138895813 2008-Apr-29 21:39:10 LOG4 log_alfabeam: ALFABEAM 5 12.140487780274979 7.488801813879196 2008-Apr-29 21:39:10 LOG4 log_alfabeam: ALFABEAM 6 12.138503335019589 7.590630602301084 2008-Apr-29 21:39:10 INFO2 take_spectra: Starting WAPP scan: 812000133 2008-Apr-29 21:39:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-29 21:39:11 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-29 21:39:11 LOG5 begin_task: Level: (5) ID = <10368> Status = 0 0 0 0 ok 2008-Apr-29 21:39:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-29 21:39:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 5952.00 2008-Apr-29 21:39:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.156804 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-29 21:39:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.156804 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 21:39:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.156804 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 21:39:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.156804 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 21:39:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.156804 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 21:39:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.156804 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 21:39:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.156804 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 21:39:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.156804 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 21:39:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.156804 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 21:39:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-29 21:39:17 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-29 21:39:17 LOG5 end_task: Level: (5) ID = <10368> Status = 0 0 0 0 ok 2008-Apr-29 21:39:17 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-29 21:39:17 LOG5 end_task: Level: (4) ID = <10367> Status = 0 0 0 0 ok 2008-Apr-29 21:39:17 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-29 21:39:17 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-29 21:39:17 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-29 21:39:17 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-29 21:39:17 LOG5 begin_task: Level: (4) ID = <10369> Status = 0 0 0 0 ok 2008-Apr-29 21:39:18 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-29 21:39:18 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-29 21:39:18 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-29 21:39:18 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-29 21:39:18 LOG5 end_task: Level: (4) ID = <10369> Status = 0 0 0 0 ok 2008-Apr-29 21:39:18 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-29 21:39:18 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-29 21:39:18 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-29 21:39:18 LOG5 begin_task: Level: (4) ID = <10370> Status = 0 0 0 0 ok 2008-Apr-29 21:39:18 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-29 21:39:18 LOG5 log_alfabeam: Parameters: 12.13425 7.5227222222222228 11.762755 2008.3310124027175 42.399986 2008-Apr-29 21:39:18 LOG4 log_alfabeam: ALFABEAM 0 12.134249999999994 7.522722222222227 2008-Apr-29 21:39:18 LOG4 log_alfabeam: ALFABEAM 1 12.132308277884258 7.624711721407060 2008-Apr-29 21:39:18 LOG4 log_alfabeam: ALFABEAM 2 12.128052077983664 7.557488352257818 2008-Apr-29 21:39:18 LOG4 log_alfabeam: ALFABEAM 3 12.129943133500831 7.455280001256583 2008-Apr-29 21:39:18 LOG4 log_alfabeam: ALFABEAM 4 12.136169997483609 7.420611975441342 2008-Apr-29 21:39:18 LOG4 log_alfabeam: ALFABEAM 5 12.140483161426982 7.488614182657642 2008-Apr-29 21:39:18 LOG4 log_alfabeam: ALFABEAM 6 12.138512560737961 7.590502409728818 2008-Apr-29 21:39:18 INFO2 take_spectra: Starting WAPP scan: 812000134 2008-Apr-29 21:39:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-29 21:39:18 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-29 21:39:18 LOG5 begin_task: Level: (5) ID = <10371> Status = 0 0 0 0 ok 2008-Apr-29 21:39:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-29 21:39:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 5959.00 2008-Apr-29 21:39:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.563 > 1.4)! 2008-Apr-29 21:39:23 LOG4 check_wapp_levels: WAPP-1 power levels: 1.563 1.410 1.484 1.406 2008-Apr-29 21:39:23 LOG4 check_wapp_levels: WAPP-2 power levels: 1.349 1.255 1.286 1.373 2008-Apr-29 21:39:23 LOG4 check_wapp_levels: WAPP-3 power levels: 1.527 1.259 1.344 1.497 2008-Apr-29 21:39:23 LOG4 check_wapp_levels: WAPP-4 power levels: 1.357 1.380 1.475 1.531 2008-Apr-29 21:39:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.156804 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-29 21:39:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.156804 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 21:39:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.156804 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 21:39:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.156804 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 21:39:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.156804 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 21:39:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.156804 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 21:39:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.156804 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 21:39:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.156804 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 21:39:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.156804 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 21:39:24 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-29 21:39:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-29 21:39:24 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-29 21:39:24 LOG5 end_task: Level: (5) ID = <10371> Status = 0 0 0 0 ok 2008-Apr-29 21:39:24 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-29 21:39:24 LOG5 end_task: Level: (4) ID = <10370> Status = 0 0 0 0 ok 2008-Apr-29 21:39:24 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-29 21:39:24 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-29 21:39:24 LOG5 finish_task: Level: (3) ID = <10361> Status = 0 0 0 0 ok 2008-Apr-29 21:39:24 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-29 21:39:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 21:39:24 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-29 21:39:24 LOG5 end_task: Level: (3) ID = <10361> Status = 0 0 0 0 ok 2008-Apr-29 21:39:25 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-29 21:39:25 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 332.04 and ZA = 12.23 2008-Apr-29 21:39:25 LOG3 track_source: Calling 'track_source AGESVC1A_p2_060 332.04 12.2318653039 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-29 21:39:25 START begin_task: Starting task 'sending tracking commands' 2008-Apr-29 21:39:25 LOG5 begin_task: Level: (3) ID = <10372> Status = 0 0 0 0 ok 2008-Apr-29 21:39:25 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_060} INFO {Slewing to source 'AGESVC1A_p2_060' ...} 2008-Apr-29 21:39:25 INFO1 track_source: Starting to track AGESVC1A_p2_060 2008-Apr-29 21:39:25 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_060" 2008-Apr-29 21:39:25 LOG3 vw_send: To DATATAKING: set ra 332.04 2008-Apr-29 21:39:25 LOG3 vw_send: To DATATAKING: set dec 12.2318653039 2008-Apr-29 21:39:25 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-29 21:39:25 LOG3 vw_send: To DATATAKING: pnt tr 332.04 12.2318653039 -CF 2008-Apr-29 21:39:25 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-29 21:39:25 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-29 21:39:25 LOG5 finish_task: Level: (3) ID = <10372> Status = 0 0 0 0 ok 2008-Apr-29 21:39:25 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-29 21:39:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 21:39:25 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-29 21:39:25 LOG5 end_task: Level: (3) ID = <10372> Status = 0 0 0 0 ok 2008-Apr-29 21:39:25 LOG1 fixed_driftmap: Parameters: HA = -00:23:00.0 Start = 11:46:27.2 LST = 11:45:52.9 diff = 34.2 secs 2008-Apr-29 21:39:25 INFO2 fixed_driftmap: Waiting 32.2 seconds for RA 12:09:27 2008-Apr-29 21:39:25 INFO2 lstwait: Waiting for 32.1 secs from LST 11:45:53 to LST 11:46:25 ... 2008-Apr-29 21:39:25 LOG4 send_obs_status: To obs_status: <1> TASKTIME 32.136411705886083 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-29 21:39:25 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-29 21:39:25 LOG5 begin_task: Level: (3) ID = <10373> Status = 0 0 0 0 ok 2008-Apr-29 21:39:25 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_060" 2008-Apr-29 21:39:25 LOG4 got_cormsg: From DATATAKING: set ra 332.04 2008-Apr-29 21:39:25 LOG4 got_cormsg: From DATATAKING: set dec 12.2318653039 2008-Apr-29 21:39:25 LOG4 got_cormsg: From DATATAKING: vw% 332.04 2008-Apr-29 21:39:25 LOG4 got_cormsg: From DATATAKING: vw% 12.2318653039 2008-Apr-29 21:39:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 21:39:25 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-29 21:39:25 LOG4 got_cormsg: From DATATAKING: pnt tr 332.04 12.2318653039 -CF 2008-Apr-29 21:39:25 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-29 21:39:25 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-29 21:39:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 21:39:29 INFO5 check_wapp_levels: WAPP power levels are between 0.152 and 1.133 (still bad) 2008-Apr-29 21:39:57 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-29 21:39:57 LOG5 end_task: Level: (3) ID = <10373> Status = 0 0 0 0 ok 2008-Apr-29 21:39:57 LOG4 lstwait: Finished waiting, the gui caused difference: 0.86680280000095422 2008-Apr-29 21:39:57 INFO3 lstwait: Finished waiting 2008-Apr-29 21:39:57 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-29 21:39:57 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-29 21:39:57 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-29 21:39:57 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-29 21:39:57 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-29 21:39:57 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-29 21:39:57 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-29 21:39:57 LOG5 begin_task: Level: (3) ID = <10374> Status = 0 0 0 0 ok 2008-Apr-29 21:39:57 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-29 21:39:57 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-29 21:39:57 INFO2 take_spectra: Starting WAPP scan: 812000135 2008-Apr-29 21:39:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-29 21:39:58 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-29 21:39:58 LOG5 begin_task: Level: (4) ID = <10375> Status = 0 0 0 0 ok 2008-Apr-29 21:39:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-29 21:39:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 5999.00 2008-Apr-29 21:40:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.156804 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-29 21:40:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.156804 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 21:40:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.156804 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 21:40:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.156804 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 21:40:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.156804 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 21:40:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.156804 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 21:40:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.156804 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 21:40:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.156804 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 21:40:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.156804 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 21:40:00 INFO5 check_wapp_levels: WAPP power levels are between 0.152 and 1.133 (still bad) 2008-Apr-29 21:40:02 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.903 and 1.131 2008-Apr-29 21:54:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.146 < 0.8)! 2008-Apr-29 21:54:38 LOG4 check_wapp_levels: WAPP-1 power levels: 1.134 0.146 1.111 1.055 2008-Apr-29 21:54:38 LOG4 check_wapp_levels: WAPP-2 power levels: 0.999 0.918 0.946 1.018 2008-Apr-29 21:54:38 LOG4 check_wapp_levels: WAPP-3 power levels: 1.110 0.919 0.967 1.118 2008-Apr-29 21:54:38 LOG4 check_wapp_levels: WAPP-4 power levels: 0.973 0.994 1.056 1.102 2008-Apr-29 21:54:40 INFO5 check_wapp_levels: WAPP power levels are between 0.152 and 1.135 (still bad) 2008-Apr-29 21:54:42 INFO5 check_wapp_levels: WAPP power levels are between 0.155 and 1.132 (still bad) 2008-Apr-29 21:54:44 INFO5 check_wapp_levels: WAPP power levels are between 0.157 and 1.133 (still bad) 2008-Apr-29 21:54:46 INFO5 check_wapp_levels: WAPP power levels are between 0.158 and 1.130 (still bad) 2008-Apr-29 21:54:48 INFO5 check_wapp_levels: WAPP power levels are between 0.159 and 1.125 (still bad) 2008-Apr-29 21:54:50 INFO5 check_wapp_levels: WAPP power levels are between 0.160 and 1.133 (still bad) 2008-Apr-29 21:54:52 INFO5 check_wapp_levels: WAPP power levels are between 0.161 and 1.133 (still bad) 2008-Apr-29 21:54:54 INFO5 check_wapp_levels: WAPP power levels are between 0.161 and 1.129 (still bad) 2008-Apr-29 21:54:56 INFO5 check_wapp_levels: WAPP power levels are between 0.162 and 1.126 (still bad) 2008-Apr-29 21:54:58 INFO5 check_wapp_levels: WAPP power levels are between 0.163 and 1.128 (still bad) 2008-Apr-29 21:55:00 INFO5 check_wapp_levels: WAPP power levels are between 0.163 and 1.126 (still bad) 2008-Apr-29 21:55:02 INFO5 check_wapp_levels: WAPP power levels are between 0.163 and 1.127 (still bad) 2008-Apr-29 21:55:04 INFO5 check_wapp_levels: WAPP power levels are between 0.163 and 1.126 (still bad) 2008-Apr-29 21:55:06 INFO5 check_wapp_levels: WAPP power levels are between 0.164 and 1.132 (still bad) 2008-Apr-29 21:55:08 INFO5 check_wapp_levels: WAPP power levels are between 0.165 and 1.131 (still bad) 2008-Apr-29 21:55:10 INFO5 check_wapp_levels: WAPP power levels are between 0.165 and 1.132 (still bad) 2008-Apr-29 21:55:12 INFO5 check_wapp_levels: WAPP power levels are between 0.165 and 1.126 (still bad) 2008-Apr-29 21:55:14 INFO5 check_wapp_levels: WAPP power levels are between 0.165 and 1.126 (still bad) 2008-Apr-29 21:55:16 INFO5 check_wapp_levels: WAPP power levels are between 0.165 and 1.124 (still bad) 2008-Apr-29 21:55:18 INFO5 check_wapp_levels: WAPP power levels are between 0.165 and 1.128 (still bad) 2008-Apr-29 21:55:20 INFO5 check_wapp_levels: WAPP power levels are between 0.165 and 1.132 (still bad) 2008-Apr-29 21:55:22 INFO5 check_wapp_levels: WAPP power levels are between 0.166 and 1.129 (still bad) 2008-Apr-29 21:55:24 INFO5 check_wapp_levels: WAPP power levels are between 0.166 and 1.130 (still bad) 2008-Apr-29 21:55:26 INFO5 check_wapp_levels: WAPP power levels are between 0.166 and 1.128 (still bad) 2008-Apr-29 21:55:28 INFO5 check_wapp_levels: WAPP power levels are between 0.166 and 1.127 (still bad) 2008-Apr-29 21:55:31 INFO5 check_wapp_levels: WAPP power levels are between 0.166 and 1.131 (still bad) 2008-Apr-29 21:55:33 INFO5 check_wapp_levels: WAPP power levels are between 0.166 and 1.132 (still bad) 2008-Apr-29 21:55:35 INFO5 check_wapp_levels: WAPP power levels are between 0.166 and 1.128 (still bad) 2008-Apr-29 21:55:37 INFO5 check_wapp_levels: WAPP power levels are between 0.166 and 1.128 (still bad) 2008-Apr-29 21:55:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.166 < 0.8)! 2008-Apr-29 21:55:39 LOG4 check_wapp_levels: WAPP-1 power levels: 1.133 0.166 1.111 1.056 2008-Apr-29 21:55:39 LOG4 check_wapp_levels: WAPP-2 power levels: 0.998 0.918 0.939 1.010 2008-Apr-29 21:55:39 LOG4 check_wapp_levels: WAPP-3 power levels: 1.105 0.916 0.966 1.118 2008-Apr-29 21:55:39 LOG4 check_wapp_levels: WAPP-4 power levels: 0.967 0.994 1.053 1.103 2008-Apr-29 21:55:41 INFO5 check_wapp_levels: WAPP power levels are between 0.166 and 1.130 (still bad) 2008-Apr-29 21:55:43 INFO5 check_wapp_levels: WAPP power levels are between 0.165 and 1.130 (still bad) 2008-Apr-29 21:55:45 INFO5 check_wapp_levels: WAPP power levels are between 0.165 and 1.134 (still bad) 2008-Apr-29 21:55:47 INFO5 check_wapp_levels: WAPP power levels are between 0.166 and 1.134 (still bad) 2008-Apr-29 21:55:49 INFO5 check_wapp_levels: WAPP power levels are between 0.167 and 1.129 (still bad) 2008-Apr-29 21:55:51 INFO5 check_wapp_levels: WAPP power levels are between 0.166 and 1.133 (still bad) 2008-Apr-29 21:55:53 INFO5 check_wapp_levels: WAPP power levels are between 0.166 and 1.130 (still bad) 2008-Apr-29 21:55:55 INFO5 check_wapp_levels: WAPP power levels are between 0.166 and 1.130 (still bad) 2008-Apr-29 21:55:57 INFO5 check_wapp_levels: WAPP power levels are between 0.166 and 1.130 (still bad) 2008-Apr-29 21:55:59 INFO5 check_wapp_levels: WAPP power levels are between 0.166 and 1.127 (still bad) 2008-Apr-29 21:56:01 INFO5 check_wapp_levels: WAPP power levels are between 0.166 and 1.131 (still bad) 2008-Apr-29 21:56:03 INFO5 check_wapp_levels: WAPP power levels are between 0.166 and 1.128 (still bad) 2008-Apr-29 21:56:05 INFO5 check_wapp_levels: WAPP power levels are between 0.166 and 1.133 (still bad) 2008-Apr-29 21:56:07 INFO5 check_wapp_levels: WAPP power levels are between 0.167 and 1.134 (still bad) 2008-Apr-29 21:56:09 INFO5 check_wapp_levels: WAPP power levels are between 0.166 and 1.134 (still bad) 2008-Apr-29 21:56:11 INFO5 check_wapp_levels: WAPP power levels are between 0.167 and 1.133 (still bad) 2008-Apr-29 21:56:13 INFO5 check_wapp_levels: WAPP power levels are between 0.167 and 1.134 (still bad) 2008-Apr-29 21:56:15 INFO5 check_wapp_levels: WAPP power levels are between 0.166 and 1.133 (still bad) 2008-Apr-29 21:56:17 INFO5 check_wapp_levels: WAPP power levels are between 0.166 and 1.128 (still bad) 2008-Apr-29 21:56:19 INFO5 check_wapp_levels: WAPP power levels are between 0.166 and 1.129 (still bad) 2008-Apr-29 21:56:21 INFO5 check_wapp_levels: WAPP power levels are between 0.166 and 1.129 (still bad) 2008-Apr-29 21:56:23 INFO5 check_wapp_levels: WAPP power levels are between 0.166 and 1.131 (still bad) 2008-Apr-29 21:56:25 INFO5 check_wapp_levels: WAPP power levels are between 0.166 and 1.133 (still bad) 2008-Apr-29 21:56:27 INFO5 check_wapp_levels: WAPP power levels are between 0.165 and 1.133 (still bad) 2008-Apr-29 21:56:29 INFO5 check_wapp_levels: WAPP power levels are between 0.165 and 1.130 (still bad) 2008-Apr-29 21:56:31 INFO5 check_wapp_levels: WAPP power levels are between 0.165 and 1.131 (still bad) 2008-Apr-29 21:56:33 INFO5 check_wapp_levels: WAPP power levels are between 0.165 and 1.127 (still bad) 2008-Apr-29 21:56:35 INFO5 check_wapp_levels: WAPP power levels are between 0.165 and 1.131 (still bad) 2008-Apr-29 21:56:37 INFO5 check_wapp_levels: WAPP power levels are between 0.166 and 1.127 (still bad) 2008-Apr-29 21:56:39 INFO5 check_wapp_levels: WAPP power levels are between 0.166 and 1.131 (still bad) 2008-Apr-29 21:56:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.166 < 0.8)! 2008-Apr-29 21:56:41 LOG4 check_wapp_levels: WAPP-1 power levels: 1.125 0.166 1.112 1.057 2008-Apr-29 21:56:41 LOG4 check_wapp_levels: WAPP-2 power levels: 0.999 0.916 0.943 1.013 2008-Apr-29 21:56:41 LOG4 check_wapp_levels: WAPP-3 power levels: 1.104 0.913 0.964 1.116 2008-Apr-29 21:56:41 LOG4 check_wapp_levels: WAPP-4 power levels: 0.968 0.994 1.054 1.104 2008-Apr-29 21:56:43 INFO5 check_wapp_levels: WAPP power levels are between 0.166 and 1.128 (still bad) 2008-Apr-29 21:56:45 INFO5 check_wapp_levels: WAPP power levels are between 0.165 and 1.127 (still bad) 2008-Apr-29 21:56:47 INFO5 check_wapp_levels: WAPP power levels are between 0.166 and 1.133 (still bad) 2008-Apr-29 21:56:49 INFO5 check_wapp_levels: WAPP power levels are between 0.166 and 1.130 (still bad) 2008-Apr-29 21:56:51 INFO5 check_wapp_levels: WAPP power levels are between 0.166 and 1.131 (still bad) 2008-Apr-29 21:56:54 INFO5 check_wapp_levels: WAPP power levels are between 0.166 and 1.129 (still bad) 2008-Apr-29 21:56:56 INFO5 check_wapp_levels: WAPP power levels are between 0.188 and 1.131 (still bad) 2008-Apr-29 21:56:58 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.913 and 1.129 2008-Apr-29 21:59:59 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-29 21:59:59 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-29 21:59:59 LOG5 end_task: Level: (4) ID = <10375> Status = 0 0 0 0 ok 2008-Apr-29 21:59:59 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-29 21:59:59 LOG5 end_task: Level: (3) ID = <10374> Status = 0 0 0 0 ok 2008-Apr-29 21:59:59 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-29 21:59:59 LOG5 finish_task: Level: (2) ID = <10341> Status = 0 0 0 0 ok 2008-Apr-29 21:59:59 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-29 21:59:59 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-29 21:59:59 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-29 21:59:59 LOG5 end_task: Level: (2) ID = <10341> Status = 0 0 0 0 ok 2008-Apr-29 21:59:59 COMMAND run_command_line: EXECUTING command 39: 'FIXEDDRIFT az=0.00 alfaangle=19.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_062 ra=120900.00 dec=72830.00' 2008-Apr-29 21:59:59 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-29 22:00:00 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-29 22:00:00 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 0.00 19.1 hcorcal 5 tracking no first 1 AGESVC1A_p2_062 120900.00 72830.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-29 22:00:00 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-29 22:00:00 LOG5 begin_task: Level: (2) ID = <10376> Status = 0 0 0 0 ok 2008-Apr-29 22:00:00 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGESVC1A_p2_060' 2008-Apr-29 22:00:00 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-29 22:00:00 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1A_p2_062} 2008-Apr-29 22:00:00 INFO3 fixed_driftmap: Sending telescope to Az = 0.00 and ZA = 10.93 2008-Apr-29 22:00:00 LOG3 track_source: Calling 'track_source AGESVC1A_p2_062 0.00 10.9274488426 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-29 22:00:00 START begin_task: Starting task 'sending tracking commands' 2008-Apr-29 22:00:00 LOG5 begin_task: Level: (3) ID = <10377> Status = 0 0 0 0 ok 2008-Apr-29 22:00:00 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_062} INFO {Slewing to source 'AGESVC1A_p2_062' ...} 2008-Apr-29 22:00:00 INFO1 track_source: Starting to track AGESVC1A_p2_062 2008-Apr-29 22:00:00 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_062" 2008-Apr-29 22:00:00 LOG3 vw_send: To DATATAKING: set ra 0.00 2008-Apr-29 22:00:00 LOG3 vw_send: To DATATAKING: set dec 10.9274488426 2008-Apr-29 22:00:00 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-29 22:00:00 LOG3 vw_send: To DATATAKING: pnt tr 0.00 10.9274488426 -CF 2008-Apr-29 22:00:00 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-29 22:00:00 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-29 22:00:00 LOG5 finish_task: Level: (3) ID = <10377> Status = 0 0 0 0 ok 2008-Apr-29 22:00:00 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-29 22:00:00 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 22:00:00 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-29 22:00:00 LOG5 end_task: Level: (3) ID = <10377> Status = 0 0 0 0 ok 2008-Apr-29 22:00:00 START begin_task: Starting task 'rotate ALFA to +19.1 degrees' 2008-Apr-29 22:00:00 LOG5 begin_task: Level: (3) ID = <10378> Status = 0 0 0 0 ok 2008-Apr-29 22:00:00 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19.1 degrees ...} 2008-Apr-29 22:00:00 INFO2 rotate_alfa: ALFA commanded to +19.1 degrees 2008-Apr-29 22:00:00 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19.1 REPLY 2008-Apr-29 22:00:00 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-29 22:00:00 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-29 22:00:00 LOG5 begin_task: Level: (4) ID = <10379> Status = 0 0 0 0 ok 2008-Apr-29 22:00:00 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_062" 2008-Apr-29 22:00:00 LOG4 got_cormsg: From DATATAKING: set ra 0.00 2008-Apr-29 22:00:00 LOG4 got_cormsg: From DATATAKING: set dec 10.9274488426 2008-Apr-29 22:00:00 LOG4 got_cormsg: From DATATAKING: vw% 0.00 2008-Apr-29 22:00:00 LOG4 got_cormsg: From DATATAKING: vw% 10.9274488426 2008-Apr-29 22:00:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 22:00:00 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-29 22:00:00 LOG4 got_cormsg: From DATATAKING: pnt tr 0.00 10.9274488426 -CF 2008-Apr-29 22:00:00 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-29 22:00:00 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-29 22:00:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 22:00:15 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-29 22:00:15 INFO3 alfa_motor: ALFA rotator in-position +19.10 degrees 2008-Apr-29 22:00:15 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-29 22:00:15 LOG5 end_task: Level: (4) ID = <10379> Status = 0 0 0 0 ok 2008-Apr-29 22:00:15 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-29 22:00:15 STOP finish_task: Finishing task 'rotate ALFA to +19.1 degrees' 2008-Apr-29 22:00:15 LOG5 finish_task: Level: (3) ID = <10378> Status = 0 0 0 0 ok 2008-Apr-29 22:00:15 INFO2 finish_task: DONE finished configuration: rotating ALFA to +19.1 degrees 2008-Apr-29 22:00:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 22:00:15 STOP end_task: Finishing task 'rotate ALFA to +19.1 degrees' with status 'OK' 2008-Apr-29 22:00:15 LOG5 end_task: Level: (3) ID = <10378> Status = 0 0 0 0 ok 2008-Apr-29 22:00:15 START begin_task: Starting task 'waiting on telescope' 2008-Apr-29 22:00:15 LOG5 begin_task: Level: (3) ID = <10380> Status = 0 0 0 0 ok 2008-Apr-29 22:00:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-29 22:00:15 LOG3 waittrk: Start waittrk 5 2008-Apr-29 22:00:15 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-29 22:00:15 LOG5 begin_task: Level: (4) ID = <10381> Status = 0 0 0 0 ok 2008-Apr-29 22:00:20 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-29 22:00:20 LOG5 end_task: Level: (4) ID = <10381> Status = 0 0 0 0 ok 2008-Apr-29 22:00:20 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-29 22:00:20 LOG5 begin_task: Level: (4) ID = <10382> Status = 0 0 0 0 ok 2008-Apr-29 22:01:23 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-29 22:01:23 LOG5 end_task: Level: (4) ID = <10382> Status = 0 0 0 0 ok 2008-Apr-29 22:01:23 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-29 22:01:23 INFO2 waittrk: Now tracking AGESVC1A_p2_062 2008-Apr-29 22:01:23 LOG4 waittrk: Current telescope position: Az = 359.64 ZA = 10.89 2008-Apr-29 22:01:23 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-29 22:01:23 LOG5 finish_task: Level: (3) ID = <10380> Status = 0 0 0 0 ok 2008-Apr-29 22:01:23 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-29 22:01:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 22:01:23 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-29 22:01:23 LOG5 end_task: Level: (3) ID = <10380> Status = 0 0 0 0 ok 2008-Apr-29 22:01:23 START begin_task: Starting task 'selecting calibration type' 2008-Apr-29 22:01:23 LOG5 begin_task: Level: (3) ID = <10383> Status = 0 0 0 0 ok 2008-Apr-29 22:01:23 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-29 22:01:23 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-29 22:01:23 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 22:01:23 START begin_task: Starting task 'waiting on setcal' 2008-Apr-29 22:01:23 LOG5 begin_task: Level: (4) ID = <10384> Status = 0 0 0 0 ok 2008-Apr-29 22:01:23 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-29 22:01:23 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 22:01:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 22:01:24 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-29 22:01:24 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-29 22:01:24 LOG5 end_task: Level: (4) ID = <10384> Status = 0 0 0 0 ok 2008-Apr-29 22:01:24 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-29 22:01:24 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-29 22:01:24 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-29 22:01:24 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-29 22:01:24 LOG5 begin_task: Level: (4) ID = <10385> Status = 0 0 0 0 ok 2008-Apr-29 22:01:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 22:01:25 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-29 22:01:25 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-29 22:01:25 LOG5 end_task: Level: (4) ID = <10385> Status = 0 0 0 0 ok 2008-Apr-29 22:01:25 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-29 22:01:25 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-29 22:01:25 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-29 22:01:25 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-29 22:01:25 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-29 22:01:25 LOG5 begin_task: Level: (4) ID = <10386> Status = 0 0 0 0 ok 2008-Apr-29 22:01:25 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-29 22:01:25 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-29 22:01:25 LOG5 end_task: Level: (4) ID = <10386> Status = 0 0 0 0 ok 2008-Apr-29 22:01:25 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-29 22:01:25 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-29 22:01:25 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-29 22:01:25 LOG5 finish_task: Level: (3) ID = <10383> Status = 0 0 0 0 ok 2008-Apr-29 22:01:25 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-29 22:01:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 22:01:25 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-29 22:01:25 LOG5 end_task: Level: (3) ID = <10383> Status = 0 0 0 0 ok 2008-Apr-29 22:01:25 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2008-Apr-29 22:01:25 INFO2 astwait: Waiting for 29 seconds from 02:01:25 to 02:01:54 UTC ... 2008-Apr-29 22:01:25 LOG4 send_obs_status: To obs_status: <1> TASKTIME 29 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-29 22:01:25 START begin_task: Starting task 'waiting on waiting for AST time' 2008-Apr-29 22:01:25 LOG5 begin_task: Level: (3) ID = <10387> Status = 0 0 0 0 ok 2008-Apr-29 22:01:54 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2008-Apr-29 22:01:54 LOG5 end_task: Level: (3) ID = <10387> Status = 0 0 0 0 ok 2008-Apr-29 22:01:54 INFO3 astwait: Finished waiting 2008-Apr-29 22:01:54 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-29 22:01:54 LOG5 dopset_later: Calling 'dopset_later 61.352416801459007' 2008-Apr-29 22:01:54 INFO3 dopset_later: Setting Doppler correction for 22:02:54 (61.4 seconds from now) 2008-Apr-29 22:01:54 LOG5 antvel: Calling 'antvel 0.000000 10.927449 F 61.352416801459007' 2008-Apr-29 22:01:54 LOG2 antvel: Parameters to Doppler: Heliocentric 93774 2008 120 0.0 2008-Apr-29 22:01:54 INFO5 antvel: Computed antenna velocity: +18.84667 km/s 2008-Apr-29 22:01:54 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=18.846670791299999 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-29 22:01:54 INFO4 dopset_gen: New sky frequencies: 1381.156601 1381.156601 1381.156601 1381.156601 1381.156601 1381.156601 1381.156601 1381.156601 1381.156601 2008-Apr-29 22:01:54 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.156601 sky0=1381.156601 sky1=1381.156601 sky2=1381.156601 sky3=1381.156601 sky4=1381.156601 sky5=1381.156601 sky6=1381.156601 sky7=1381.156601 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-29 22:01:54 LOG2 dopset_gen: Result from 'sky2syn': 1631.156601 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-29 22:01:54 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631156601.0} 2008-Apr-29 22:01:54 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 22:01:54 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-29 22:01:54 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-29 22:01:54 INFO5 fixed_driftmap: Tracking J2000 position: RA = 12:08:03.1 Dec = +07:28:21.8 2008-Apr-29 22:01:54 LOG3 track_source: Calling 'track_source AGESVC1A_p2_062 120803.1 072821.8 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-29 22:01:54 START begin_task: Starting task 'sending tracking commands' 2008-Apr-29 22:01:54 LOG5 begin_task: Level: (3) ID = <10388> Status = 0 0 0 0 ok 2008-Apr-29 22:01:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_062} INFO {Slewing to source 'AGESVC1A_p2_062' ...} 2008-Apr-29 22:01:54 INFO1 track_source: Starting to track AGESVC1A_p2_062 2008-Apr-29 22:01:54 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_062" 2008-Apr-29 22:01:54 LOG3 vw_send: To DATATAKING: set ra 120803.1 2008-Apr-29 22:01:54 LOG3 vw_send: To DATATAKING: set dec 072821.8 2008-Apr-29 22:01:54 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-29 22:01:54 LOG3 vw_send: To DATATAKING: pnt tr 120803.1 072821.8 -CJ 2008-Apr-29 22:01:54 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-29 22:01:54 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-29 22:01:54 LOG5 finish_task: Level: (3) ID = <10388> Status = 0 0 0 0 ok 2008-Apr-29 22:01:54 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-29 22:01:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 22:01:54 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-29 22:01:54 LOG5 end_task: Level: (3) ID = <10388> Status = 0 0 0 0 ok 2008-Apr-29 22:01:54 START begin_task: Starting task 'waiting on telescope' 2008-Apr-29 22:01:54 LOG5 begin_task: Level: (3) ID = <10389> Status = 0 0 0 0 ok 2008-Apr-29 22:01:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-29 22:01:54 LOG3 waittrk: Start waittrk 5 2008-Apr-29 22:01:54 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-29 22:01:54 LOG5 begin_task: Level: (4) ID = <10390> Status = 0 0 0 0 ok 2008-Apr-29 22:01:54 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631156601.0} 2008-Apr-29 22:01:54 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 22:01:54 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-29 22:01:54 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_062" 2008-Apr-29 22:01:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 22:01:54 LOG4 got_cormsg: From DATATAKING: set ra 120803.1 2008-Apr-29 22:01:54 LOG4 got_cormsg: From DATATAKING: set dec 072821.8 2008-Apr-29 22:01:54 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-29 22:01:54 LOG4 got_cormsg: From DATATAKING: pnt tr 120803.1 072821.8 -CJ 2008-Apr-29 22:01:54 LOG4 got_cormsg: From DATATAKING: 120803.1 2008-Apr-29 22:01:54 LOG4 got_cormsg: From DATATAKING: vw% 072821.8 2008-Apr-29 22:01:54 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2008-Apr-29 22:01:54 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-29 22:01:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 22:01:59 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-29 22:01:59 LOG5 end_task: Level: (4) ID = <10390> Status = 0 0 0 0 ok 2008-Apr-29 22:01:59 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-29 22:01:59 LOG5 begin_task: Level: (4) ID = <10391> Status = 0 0 0 0 ok 2008-Apr-29 22:02:01 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-29 22:02:01 LOG5 end_task: Level: (4) ID = <10391> Status = 0 0 0 0 ok 2008-Apr-29 22:02:01 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-29 22:02:01 INFO2 waittrk: Now tracking AGESVC1A_p2_062 2008-Apr-29 22:02:01 LOG4 waittrk: Current telescope position: Az = 359.73 ZA = 10.90 2008-Apr-29 22:02:01 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-29 22:02:01 LOG5 finish_task: Level: (3) ID = <10389> Status = 0 0 0 0 ok 2008-Apr-29 22:02:01 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-29 22:02:01 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 22:02:01 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-29 22:02:01 LOG5 end_task: Level: (3) ID = <10389> Status = 0 0 0 0 ok 2008-Apr-29 22:02:01 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-29 22:02:01 LOG5 begin_task: Level: (3) ID = <10392> Status = 0 0 0 0 ok 2008-Apr-29 22:02:01 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-29 22:02:01 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-29 22:02:01 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-29 22:02:01 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-29 22:02:01 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 22:02:01 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-29 22:02:01 LOG5 begin_task: Level: (4) ID = <10393> Status = 0 0 0 0 ok 2008-Apr-29 22:02:01 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-29 22:02:01 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 22:02:04 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 22:02:04 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-29 22:02:04 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-29 22:02:04 LOG5 end_task: Level: (4) ID = <10393> Status = 0 0 0 0 ok 2008-Apr-29 22:02:04 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-29 22:02:04 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-29 22:02:04 LOG5 begin_task: Level: (4) ID = <10394> Status = 0 0 0 0 ok 2008-Apr-29 22:02:04 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-29 22:02:04 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-29 22:02:04 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-29 22:02:04 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-29 22:02:04 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-29 22:02:04 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-29 22:02:04 LOG5 begin_task: Level: (5) ID = <10395> Status = 0 0 0 0 ok 2008-Apr-29 22:02:05 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-29 22:02:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 22:02:05 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 2 dB --- beam 1: 7 6 dB 2008-Apr-29 22:02:05 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 3 dB --- beam 5: 6 5 dB 2008-Apr-29 22:02:05 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-29 22:02:05 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 2 2 dB 2008-Apr-29 22:02:05 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-29 22:02:05 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-29 22:02:05 LOG5 end_task: Level: (5) ID = <10395> Status = 0 0 0 0 ok 2008-Apr-29 22:02:05 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.875 1.073 ALFA beam 1: 1.110 1.049 2008-Apr-29 22:02:05 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.976 0.901 ALFA beam 3: 0.920 1.006 2008-Apr-29 22:02:05 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.099 0.904 ALFA beam 5: 0.970 1.099 2008-Apr-29 22:02:05 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.981 0.993 ALFA beam 7: 1.068 1.102 2008-Apr-29 22:02:05 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-29 22:02:05 LOG5 finish_task: Level: (4) ID = <10394> Status = 0 0 0 0 ok 2008-Apr-29 22:02:05 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-29 22:02:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 22:02:05 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-29 22:02:05 LOG5 end_task: Level: (4) ID = <10394> Status = 0 0 0 0 ok 2008-Apr-29 22:02:05 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-29 22:02:05 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-29 22:02:05 LOG5 finish_task: Level: (3) ID = <10392> Status = 0 0 0 0 ok 2008-Apr-29 22:02:05 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-29 22:02:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 22:02:05 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-29 22:02:05 LOG5 end_task: Level: (3) ID = <10392> Status = 0 0 0 0 ok 2008-Apr-29 22:02:05 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Karen O'Neil 2008-Apr-29 22:02:05 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Karen O'Neil 2008-Apr-29 22:02:05 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Karen O'Neil 2008-Apr-29 22:02:05 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Karen O'Neil 2008-Apr-29 22:02:05 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-29 22:02:05 START begin_task: Starting task 'WAPP calibration' 2008-Apr-29 22:02:05 LOG5 begin_task: Level: (3) ID = <10396> Status = 0 0 0 0 ok 2008-Apr-29 22:02:05 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-29 22:02:05 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-29 22:02:05 START begin_task: Starting task 'selecting calibration type' 2008-Apr-29 22:02:05 LOG5 begin_task: Level: (4) ID = <10397> Status = 0 0 0 0 ok 2008-Apr-29 22:02:05 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-29 22:02:05 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-29 22:02:05 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 22:02:05 START begin_task: Starting task 'waiting on setcal' 2008-Apr-29 22:02:05 LOG5 begin_task: Level: (5) ID = <10398> Status = 0 0 0 0 ok 2008-Apr-29 22:02:05 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Karen O'Neil' 2008-Apr-29 22:02:06 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-29 22:02:06 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 22:02:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 22:02:06 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-29 22:02:06 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-29 22:02:06 LOG5 end_task: Level: (5) ID = <10398> Status = 0 0 0 0 ok 2008-Apr-29 22:02:06 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-29 22:02:06 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-29 22:02:06 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-29 22:02:06 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-29 22:02:06 LOG5 begin_task: Level: (5) ID = <10399> Status = 0 0 0 0 ok 2008-Apr-29 22:02:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 22:02:06 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-29 22:02:06 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-29 22:02:06 LOG5 end_task: Level: (5) ID = <10399> Status = 0 0 0 0 ok 2008-Apr-29 22:02:06 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-29 22:02:06 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-29 22:02:06 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-29 22:02:06 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-29 22:02:06 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-29 22:02:06 LOG5 begin_task: Level: (5) ID = <10400> Status = 0 0 0 0 ok 2008-Apr-29 22:02:06 NOTE WAPPDATA-new_file: New FITS file: wapp.20080429.a2048.0009.fits 2008-Apr-29 22:02:06 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-29 22:02:06 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-29 22:02:06 LOG5 end_task: Level: (5) ID = <10400> Status = 0 0 0 0 ok 2008-Apr-29 22:02:06 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-29 22:02:06 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-29 22:02:06 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-29 22:02:06 LOG5 finish_task: Level: (4) ID = <10397> Status = 0 0 0 0 ok 2008-Apr-29 22:02:06 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-29 22:02:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 22:02:06 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-29 22:02:06 LOG5 end_task: Level: (4) ID = <10397> Status = 0 0 0 0 ok 2008-Apr-29 22:02:06 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-29 22:02:06 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-29 22:02:06 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-29 22:02:06 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-29 22:02:06 LOG5 begin_task: Level: (4) ID = <10401> Status = 0 0 0 0 ok 2008-Apr-29 22:02:06 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080429.a2048.0009.fits} 2008-Apr-29 22:02:06 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-29 22:02:06 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-29 22:02:06 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-29 22:02:06 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-29 22:02:06 LOG5 end_task: Level: (4) ID = <10401> Status = 0 0 0 0 ok 2008-Apr-29 22:02:06 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-29 22:02:06 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-29 22:02:06 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-29 22:02:06 LOG5 begin_task: Level: (4) ID = <10402> Status = 0 0 0 0 ok 2008-Apr-29 22:02:06 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-29 22:02:06 LOG5 log_alfabeam: Parameters: 12.134194444444445 7.4727222222222229 12.143796 2008.3310557520217 19.099895 2008-Apr-29 22:02:06 LOG4 log_alfabeam: ALFABEAM 0 12.134194444445923 7.472722222222220 2008-Apr-29 22:02:06 LOG4 log_alfabeam: ALFABEAM 1 12.133066300436363 7.577534900083171 2008-Apr-29 22:02:06 LOG4 log_alfabeam: ALFABEAM 2 12.128412656738481 7.508237898586426 2008-Apr-29 22:02:06 LOG4 log_alfabeam: ALFABEAM 3 12.129505045017634 7.403323943401296 2008-Apr-29 22:02:06 LOG4 log_alfabeam: ALFABEAM 4 12.135344056690196 7.367934812564410 2008-Apr-29 22:02:06 LOG4 log_alfabeam: ALFABEAM 5 12.140012096086776 7.437862123771969 2008-Apr-29 22:02:06 LOG4 log_alfabeam: ALFABEAM 6 12.138826768181834 7.542543887297931 2008-Apr-29 22:02:06 INFO2 take_spectra: Starting WAPP scan: 812000136 2008-Apr-29 22:02:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-29 22:02:07 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-29 22:02:07 LOG5 begin_task: Level: (5) ID = <10403> Status = 0 0 0 0 ok 2008-Apr-29 22:02:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-29 22:02:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7328.00 2008-Apr-29 22:02:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.156601 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-29 22:02:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.156601 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 22:02:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.156601 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 22:02:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.156601 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 22:02:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.156601 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 22:02:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.534 > 1.4)! 2008-Apr-29 22:02:13 LOG4 check_wapp_levels: WAPP-1 power levels: 1.228 1.433 1.497 1.416 2008-Apr-29 22:02:13 LOG4 check_wapp_levels: WAPP-2 power levels: 1.334 1.242 1.279 1.379 2008-Apr-29 22:02:13 LOG4 check_wapp_levels: WAPP-3 power levels: 1.532 1.258 1.350 1.477 2008-Apr-29 22:02:13 LOG4 check_wapp_levels: WAPP-4 power levels: 1.373 1.385 1.494 1.534 2008-Apr-29 22:02:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.156601 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 22:02:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.156601 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 22:02:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.156601 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 22:02:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.156601 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 22:02:13 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-29 22:02:13 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-29 22:02:13 LOG5 end_task: Level: (5) ID = <10403> Status = 0 0 0 0 ok 2008-Apr-29 22:02:13 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-29 22:02:13 LOG5 end_task: Level: (4) ID = <10402> Status = 0 0 0 0 ok 2008-Apr-29 22:02:13 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-29 22:02:13 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-29 22:02:13 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-29 22:02:13 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-29 22:02:13 LOG5 begin_task: Level: (4) ID = <10404> Status = 0 0 0 0 ok 2008-Apr-29 22:02:14 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-29 22:02:14 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-29 22:02:14 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-29 22:02:14 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-29 22:02:14 LOG5 end_task: Level: (4) ID = <10404> Status = 0 0 0 0 ok 2008-Apr-29 22:02:14 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-29 22:02:14 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-29 22:02:14 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-29 22:02:14 LOG5 begin_task: Level: (4) ID = <10405> Status = 0 0 0 0 ok 2008-Apr-29 22:02:14 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-29 22:02:14 LOG5 log_alfabeam: Parameters: 12.134194444444445 7.4727222222222229 12.146024 2008.3310560055263 19.099895 2008-Apr-29 22:02:14 LOG4 log_alfabeam: ALFABEAM 0 12.134194444444836 7.472722222222226 2008-Apr-29 22:02:14 LOG4 log_alfabeam: ALFABEAM 1 12.133086890940696 7.577583452182319 2008-Apr-29 22:02:14 LOG4 log_alfabeam: ALFABEAM 2 12.128419653860675 7.508488865929462 2008-Apr-29 22:02:14 LOG4 log_alfabeam: ALFABEAM 3 12.129491439505117 7.403527913439861 2008-Apr-29 22:02:14 LOG4 log_alfabeam: ALFABEAM 4 12.135323480480407 7.367885327335936 2008-Apr-29 22:02:14 LOG4 log_alfabeam: ALFABEAM 5 12.140005224777980 7.437609586106719 2008-Apr-29 22:02:14 LOG4 log_alfabeam: ALFABEAM 6 12.138840460114004 7.542342387974886 2008-Apr-29 22:02:14 INFO2 take_spectra: Starting WAPP scan: 812000137 2008-Apr-29 22:02:14 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-29 22:02:14 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-29 22:02:14 LOG5 begin_task: Level: (5) ID = <10406> Status = 0 0 0 0 ok 2008-Apr-29 22:02:14 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-29 22:02:14 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7335.00 2008-Apr-29 22:02:19 INFO5 check_wapp_levels: WAPP power levels are between 1.228 and 1.534 (still bad) 2008-Apr-29 22:02:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.156601 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-29 22:02:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.156601 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 22:02:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.156601 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 22:02:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.156601 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 22:02:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.156601 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 22:02:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.156601 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 22:02:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.156601 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 22:02:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.156601 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 22:02:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.156601 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 22:02:20 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-29 22:02:20 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-29 22:02:20 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-29 22:02:20 LOG5 end_task: Level: (5) ID = <10406> Status = 0 0 0 0 ok 2008-Apr-29 22:02:20 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-29 22:02:20 LOG5 end_task: Level: (4) ID = <10405> Status = 0 0 0 0 ok 2008-Apr-29 22:02:20 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-29 22:02:20 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-29 22:02:20 LOG5 finish_task: Level: (3) ID = <10396> Status = 0 0 0 0 ok 2008-Apr-29 22:02:20 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-29 22:02:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 22:02:20 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-29 22:02:20 LOG5 end_task: Level: (3) ID = <10396> Status = 0 0 0 0 ok 2008-Apr-29 22:02:21 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-29 22:02:21 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 0.00 and ZA = 10.93 2008-Apr-29 22:02:21 LOG3 track_source: Calling 'track_source AGESVC1A_p2_062 0.00 10.9274488426 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-29 22:02:21 START begin_task: Starting task 'sending tracking commands' 2008-Apr-29 22:02:21 LOG5 begin_task: Level: (3) ID = <10407> Status = 0 0 0 0 ok 2008-Apr-29 22:02:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_062} INFO {Slewing to source 'AGESVC1A_p2_062' ...} 2008-Apr-29 22:02:21 INFO1 track_source: Starting to track AGESVC1A_p2_062 2008-Apr-29 22:02:21 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_062" 2008-Apr-29 22:02:21 LOG3 vw_send: To DATATAKING: set ra 0.00 2008-Apr-29 22:02:21 LOG3 vw_send: To DATATAKING: set dec 10.9274488426 2008-Apr-29 22:02:21 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-29 22:02:21 LOG3 vw_send: To DATATAKING: pnt tr 0.00 10.9274488426 -CF 2008-Apr-29 22:02:21 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-29 22:02:21 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-29 22:02:21 LOG5 finish_task: Level: (3) ID = <10407> Status = 0 0 0 0 ok 2008-Apr-29 22:02:21 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-29 22:02:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 22:02:21 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-29 22:02:21 LOG5 end_task: Level: (3) ID = <10407> Status = 0 0 0 0 ok 2008-Apr-29 22:02:21 LOG1 fixed_driftmap: Parameters: HA = +00:00:00.0 Start = 12:09:27.2 LST = 12:08:52.7 diff = 34.4 secs 2008-Apr-29 22:02:21 INFO2 fixed_driftmap: Waiting 32.4 seconds for RA 12:09:27 2008-Apr-29 22:02:21 INFO2 lstwait: Waiting for 32.4 secs from LST 12:08:53 to LST 12:09:25 ... 2008-Apr-29 22:02:21 LOG4 send_obs_status: To obs_status: <1> TASKTIME 32.35620481970308 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-29 22:02:21 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-29 22:02:21 LOG5 begin_task: Level: (3) ID = <10408> Status = 0 0 0 0 ok 2008-Apr-29 22:02:21 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_062" 2008-Apr-29 22:02:21 LOG4 got_cormsg: From DATATAKING: set ra 0.00 2008-Apr-29 22:02:21 LOG4 got_cormsg: From DATATAKING: set dec 10.9274488426 2008-Apr-29 22:02:21 LOG4 got_cormsg: From DATATAKING: vw% 0.00 2008-Apr-29 22:02:21 LOG4 got_cormsg: From DATATAKING: vw% 10.9274488426 2008-Apr-29 22:02:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 22:02:21 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-29 22:02:21 LOG4 got_cormsg: From DATATAKING: pnt tr 0.00 10.9274488426 -CF 2008-Apr-29 22:02:21 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-29 22:02:21 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-29 22:02:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 22:02:25 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.890 and 1.111 2008-Apr-29 22:02:53 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-29 22:02:53 LOG5 end_task: Level: (3) ID = <10408> Status = 0 0 0 0 ok 2008-Apr-29 22:02:53 LOG4 lstwait: Finished waiting, the gui caused difference: 0.64640792000361103 2008-Apr-29 22:02:53 INFO3 lstwait: Finished waiting 2008-Apr-29 22:02:53 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-29 22:02:53 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-29 22:02:53 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-29 22:02:53 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-29 22:02:53 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-29 22:02:53 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-29 22:02:53 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-29 22:02:53 LOG5 begin_task: Level: (3) ID = <10409> Status = 0 0 0 0 ok 2008-Apr-29 22:02:53 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-29 22:02:53 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-29 22:02:53 INFO2 take_spectra: Starting WAPP scan: 812000138 2008-Apr-29 22:02:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-29 22:02:54 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-29 22:02:54 LOG5 begin_task: Level: (4) ID = <10410> Status = 0 0 0 0 ok 2008-Apr-29 22:02:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-29 22:02:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7375.00 2008-Apr-29 22:02:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.156601 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-29 22:02:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.156601 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 22:02:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.156601 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 22:02:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.156601 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 22:02:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.156601 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 22:02:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.156601 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 22:02:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.156601 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 22:02:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.156601 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 22:02:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.156601 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 22:11:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.651 > 1.4)! 2008-Apr-29 22:11:28 LOG4 check_wapp_levels: WAPP-1 power levels: 0.898 1.651 1.126 1.061 2008-Apr-29 22:11:28 LOG4 check_wapp_levels: WAPP-2 power levels: 0.987 0.912 0.922 1.008 2008-Apr-29 22:11:28 LOG4 check_wapp_levels: WAPP-3 power levels: 1.113 0.915 0.974 1.102 2008-Apr-29 22:11:28 LOG4 check_wapp_levels: WAPP-4 power levels: 0.986 0.995 1.073 1.105 2008-Apr-29 22:11:30 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.901 and 1.137 2008-Apr-29 22:22:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-29 22:22:55 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-29 22:22:55 LOG5 end_task: Level: (4) ID = <10410> Status = 0 0 0 0 ok 2008-Apr-29 22:22:55 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-29 22:22:55 LOG5 end_task: Level: (3) ID = <10409> Status = 0 0 0 0 ok 2008-Apr-29 22:22:55 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-29 22:22:55 LOG5 finish_task: Level: (2) ID = <10376> Status = 0 0 0 0 ok 2008-Apr-29 22:22:55 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-29 22:22:55 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-29 22:22:55 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-29 22:22:55 LOG5 end_task: Level: (2) ID = <10376> Status = 0 0 0 0 ok 2008-Apr-29 22:22:55 COMMAND run_command_line: EXECUTING command 43: 'FIXEDDRIFT az=27.75 alfaangle=-4.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_064 ra=120900.00 dec=72530.00' 2008-Apr-29 22:22:55 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-29 22:22:56 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-29 22:22:56 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 27.75 -4.0 hcorcal 5 tracking no first 1 AGESVC1A_p2_064 120900.00 72530.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-29 22:22:56 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-29 22:22:56 LOG5 begin_task: Level: (2) ID = <10411> Status = 0 0 0 0 ok 2008-Apr-29 22:22:56 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGESVC1A_p2_062' 2008-Apr-29 22:22:56 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-29 22:22:56 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1A_p2_064} 2008-Apr-29 22:22:56 INFO3 fixed_driftmap: Sending telescope to Az = 27.75 and ZA = 12.32 2008-Apr-29 22:22:56 LOG3 track_source: Calling 'track_source AGESVC1A_p2_064 27.75 12.3213486640 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-29 22:22:56 START begin_task: Starting task 'sending tracking commands' 2008-Apr-29 22:22:56 LOG5 begin_task: Level: (3) ID = <10412> Status = 0 0 0 0 ok 2008-Apr-29 22:22:56 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_064} INFO {Slewing to source 'AGESVC1A_p2_064' ...} 2008-Apr-29 22:22:56 INFO1 track_source: Starting to track AGESVC1A_p2_064 2008-Apr-29 22:22:56 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_064" 2008-Apr-29 22:22:56 LOG3 vw_send: To DATATAKING: set ra 27.75 2008-Apr-29 22:22:56 LOG3 vw_send: To DATATAKING: set dec 12.3213486640 2008-Apr-29 22:22:56 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-29 22:22:56 LOG3 vw_send: To DATATAKING: pnt tr 27.75 12.3213486640 -CF 2008-Apr-29 22:22:56 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-29 22:22:56 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-29 22:22:56 LOG5 finish_task: Level: (3) ID = <10412> Status = 0 0 0 0 ok 2008-Apr-29 22:22:56 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-29 22:22:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 22:22:56 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-29 22:22:56 LOG5 end_task: Level: (3) ID = <10412> Status = 0 0 0 0 ok 2008-Apr-29 22:22:56 START begin_task: Starting task 'rotate ALFA to -4 degrees' 2008-Apr-29 22:22:56 LOG5 begin_task: Level: (3) ID = <10413> Status = 0 0 0 0 ok 2008-Apr-29 22:22:56 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -4 degrees ...} 2008-Apr-29 22:22:56 INFO2 rotate_alfa: ALFA commanded to -4.0 degrees 2008-Apr-29 22:22:56 LOG3 sock_errsend: To ALFAMOTOR: POSITION -4.0 REPLY 2008-Apr-29 22:22:56 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-29 22:22:56 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-29 22:22:56 LOG5 begin_task: Level: (4) ID = <10414> Status = 0 0 0 0 ok 2008-Apr-29 22:22:56 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_064" 2008-Apr-29 22:22:56 LOG4 got_cormsg: From DATATAKING: set ra 27.75 2008-Apr-29 22:22:56 LOG4 got_cormsg: From DATATAKING: set dec 12.3213486640 2008-Apr-29 22:22:56 LOG4 got_cormsg: From DATATAKING: vw% 27.75 2008-Apr-29 22:22:56 LOG4 got_cormsg: From DATATAKING: vw% 12.3213486640 2008-Apr-29 22:22:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 22:22:56 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-29 22:22:56 LOG4 got_cormsg: From DATATAKING: pnt tr 27.75 12.3213486640 -CF 2008-Apr-29 22:22:56 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-29 22:22:56 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-29 22:22:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 22:23:10 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-29 22:23:10 INFO3 alfa_motor: ALFA rotator in-position -4.00 degrees 2008-Apr-29 22:23:10 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-29 22:23:10 LOG5 end_task: Level: (4) ID = <10414> Status = 0 0 0 0 ok 2008-Apr-29 22:23:10 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-29 22:23:10 STOP finish_task: Finishing task 'rotate ALFA to -4 degrees' 2008-Apr-29 22:23:10 LOG5 finish_task: Level: (3) ID = <10413> Status = 0 0 0 0 ok 2008-Apr-29 22:23:10 INFO2 finish_task: DONE finished configuration: rotating ALFA to -4 degrees 2008-Apr-29 22:23:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 22:23:10 STOP end_task: Finishing task 'rotate ALFA to -4 degrees' with status 'OK' 2008-Apr-29 22:23:10 LOG5 end_task: Level: (3) ID = <10413> Status = 0 0 0 0 ok 2008-Apr-29 22:23:10 START begin_task: Starting task 'waiting on telescope' 2008-Apr-29 22:23:10 LOG5 begin_task: Level: (3) ID = <10415> Status = 0 0 0 0 ok 2008-Apr-29 22:23:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-29 22:23:10 LOG3 waittrk: Start waittrk 5 2008-Apr-29 22:23:10 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-29 22:23:10 LOG5 begin_task: Level: (4) ID = <10416> Status = 0 0 0 0 ok 2008-Apr-29 22:23:15 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-29 22:23:15 LOG5 end_task: Level: (4) ID = <10416> Status = 0 0 0 0 ok 2008-Apr-29 22:23:15 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-29 22:23:15 LOG5 begin_task: Level: (4) ID = <10417> Status = 0 0 0 0 ok 2008-Apr-29 22:24:19 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-29 22:24:19 LOG5 end_task: Level: (4) ID = <10417> Status = 0 0 0 0 ok 2008-Apr-29 22:24:19 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-29 22:24:19 INFO2 waittrk: Now tracking AGESVC1A_p2_064 2008-Apr-29 22:24:19 LOG4 waittrk: Current telescope position: Az = 387.47 ZA = 12.29 2008-Apr-29 22:24:19 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-29 22:24:19 LOG5 finish_task: Level: (3) ID = <10415> Status = 0 0 0 0 ok 2008-Apr-29 22:24:19 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-29 22:24:19 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 22:24:19 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-29 22:24:19 LOG5 end_task: Level: (3) ID = <10415> Status = 0 0 0 0 ok 2008-Apr-29 22:24:19 START begin_task: Starting task 'selecting calibration type' 2008-Apr-29 22:24:19 LOG5 begin_task: Level: (3) ID = <10418> Status = 0 0 0 0 ok 2008-Apr-29 22:24:19 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-29 22:24:19 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-29 22:24:19 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 22:24:19 START begin_task: Starting task 'waiting on setcal' 2008-Apr-29 22:24:19 LOG5 begin_task: Level: (4) ID = <10419> Status = 0 0 0 0 ok 2008-Apr-29 22:24:19 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-29 22:24:19 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 22:24:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 22:24:20 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-29 22:24:20 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-29 22:24:20 LOG5 end_task: Level: (4) ID = <10419> Status = 0 0 0 0 ok 2008-Apr-29 22:24:20 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-29 22:24:20 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-29 22:24:20 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-29 22:24:20 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-29 22:24:20 LOG5 begin_task: Level: (4) ID = <10420> Status = 0 0 0 0 ok 2008-Apr-29 22:24:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 22:24:20 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-29 22:24:20 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-29 22:24:20 LOG5 end_task: Level: (4) ID = <10420> Status = 0 0 0 0 ok 2008-Apr-29 22:24:20 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-29 22:24:20 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-29 22:24:20 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-29 22:24:20 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-29 22:24:20 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-29 22:24:20 LOG5 begin_task: Level: (4) ID = <10421> Status = 0 0 0 0 ok 2008-Apr-29 22:24:20 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-29 22:24:20 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-29 22:24:20 LOG5 end_task: Level: (4) ID = <10421> Status = 0 0 0 0 ok 2008-Apr-29 22:24:20 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-29 22:24:20 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-29 22:24:20 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-29 22:24:20 LOG5 finish_task: Level: (3) ID = <10418> Status = 0 0 0 0 ok 2008-Apr-29 22:24:20 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-29 22:24:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 22:24:20 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-29 22:24:20 LOG5 end_task: Level: (3) ID = <10418> Status = 0 0 0 0 ok 2008-Apr-29 22:24:20 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2008-Apr-29 22:24:20 INFO2 astwait: Waiting for 31 seconds from 02:24:20 to 02:24:51 UTC ... 2008-Apr-29 22:24:20 LOG4 send_obs_status: To obs_status: <1> TASKTIME 31 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-29 22:24:20 START begin_task: Starting task 'waiting on waiting for AST time' 2008-Apr-29 22:24:20 LOG5 begin_task: Level: (3) ID = <10422> Status = 0 0 0 0 ok 2008-Apr-29 22:24:51 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2008-Apr-29 22:24:51 LOG5 end_task: Level: (3) ID = <10422> Status = 0 0 0 0 ok 2008-Apr-29 22:24:51 INFO3 astwait: Finished waiting 2008-Apr-29 22:24:51 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-29 22:24:51 LOG5 dopset_later: Calling 'dopset_later 60.589918427082239' 2008-Apr-29 22:24:51 INFO3 dopset_later: Setting Doppler correction for 22:25:51 (60.6 seconds from now) 2008-Apr-29 22:24:51 LOG5 antvel: Calling 'antvel 27.750000 12.321349 F 60.589918427082239' 2008-Apr-29 22:24:51 LOG2 antvel: Parameters to Doppler: Heliocentric 95151 2008 120 0.0 2008-Apr-29 22:24:51 INFO5 antvel: Computed antenna velocity: +18.89076 km/s 2008-Apr-29 22:24:51 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=18.890755884099999 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-29 22:24:51 INFO4 dopset_gen: New sky frequencies: 1381.156398 1381.156398 1381.156398 1381.156398 1381.156398 1381.156398 1381.156398 1381.156398 1381.156398 2008-Apr-29 22:24:51 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.156398 sky0=1381.156398 sky1=1381.156398 sky2=1381.156398 sky3=1381.156398 sky4=1381.156398 sky5=1381.156398 sky6=1381.156398 sky7=1381.156398 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-29 22:24:51 LOG2 dopset_gen: Result from 'sky2syn': 1631.156398 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-29 22:24:51 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631156398.0} 2008-Apr-29 22:24:51 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 22:24:51 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-29 22:24:51 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-29 22:24:51 INFO5 fixed_driftmap: Tracking J2000 position: RA = 12:08:03.8 Dec = +07:25:21.7 2008-Apr-29 22:24:51 LOG3 track_source: Calling 'track_source AGESVC1A_p2_064 120803.8 072521.7 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-29 22:24:51 START begin_task: Starting task 'sending tracking commands' 2008-Apr-29 22:24:51 LOG5 begin_task: Level: (3) ID = <10423> Status = 0 0 0 0 ok 2008-Apr-29 22:24:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_064} INFO {Slewing to source 'AGESVC1A_p2_064' ...} 2008-Apr-29 22:24:51 INFO1 track_source: Starting to track AGESVC1A_p2_064 2008-Apr-29 22:24:51 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_064" 2008-Apr-29 22:24:51 LOG3 vw_send: To DATATAKING: set ra 120803.8 2008-Apr-29 22:24:51 LOG3 vw_send: To DATATAKING: set dec 072521.7 2008-Apr-29 22:24:51 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-29 22:24:51 LOG3 vw_send: To DATATAKING: pnt tr 120803.8 072521.7 -CJ 2008-Apr-29 22:24:51 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-29 22:24:51 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-29 22:24:51 LOG5 finish_task: Level: (3) ID = <10423> Status = 0 0 0 0 ok 2008-Apr-29 22:24:51 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-29 22:24:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 22:24:51 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-29 22:24:51 LOG5 end_task: Level: (3) ID = <10423> Status = 0 0 0 0 ok 2008-Apr-29 22:24:51 START begin_task: Starting task 'waiting on telescope' 2008-Apr-29 22:24:51 LOG5 begin_task: Level: (3) ID = <10424> Status = 0 0 0 0 ok 2008-Apr-29 22:24:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-29 22:24:51 LOG3 waittrk: Start waittrk 5 2008-Apr-29 22:24:51 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-29 22:24:51 LOG5 begin_task: Level: (4) ID = <10425> Status = 0 0 0 0 ok 2008-Apr-29 22:24:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631156398.0} 2008-Apr-29 22:24:51 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 22:24:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 22:24:51 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_064" 2008-Apr-29 22:24:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 22:24:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 22:24:51 LOG4 got_cormsg: From DATATAKING: set ra 120803.8 2008-Apr-29 22:24:51 LOG4 got_cormsg: From DATATAKING: set dec 072521.7 2008-Apr-29 22:24:51 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-29 22:24:51 LOG4 got_cormsg: From DATATAKING: pnt tr 120803.8 072521.7 -CJ 2008-Apr-29 22:24:51 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-29 22:24:51 LOG4 got_cormsg: From DATATAKING: 120803.8 2008-Apr-29 22:24:51 LOG4 got_cormsg: From DATATAKING: vw% 072521.7 2008-Apr-29 22:24:51 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2008-Apr-29 22:24:56 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-29 22:24:56 LOG5 end_task: Level: (4) ID = <10425> Status = 0 0 0 0 ok 2008-Apr-29 22:24:56 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-29 22:24:56 LOG5 begin_task: Level: (4) ID = <10426> Status = 0 0 0 0 ok 2008-Apr-29 22:24:58 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-29 22:24:58 LOG5 end_task: Level: (4) ID = <10426> Status = 0 0 0 0 ok 2008-Apr-29 22:24:58 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-29 22:24:58 INFO2 waittrk: Now tracking AGESVC1A_p2_064 2008-Apr-29 22:24:58 LOG4 waittrk: Current telescope position: Az = 387.54 ZA = 12.30 2008-Apr-29 22:24:58 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-29 22:24:58 LOG5 finish_task: Level: (3) ID = <10424> Status = 0 0 0 0 ok 2008-Apr-29 22:24:58 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-29 22:24:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 22:24:58 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-29 22:24:58 LOG5 end_task: Level: (3) ID = <10424> Status = 0 0 0 0 ok 2008-Apr-29 22:24:58 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-29 22:24:58 LOG5 begin_task: Level: (3) ID = <10427> Status = 0 0 0 0 ok 2008-Apr-29 22:24:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-29 22:24:58 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-29 22:24:58 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-29 22:24:58 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-29 22:24:58 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 22:24:58 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-29 22:24:58 LOG5 begin_task: Level: (4) ID = <10428> Status = 0 0 0 0 ok 2008-Apr-29 22:24:59 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-29 22:24:59 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 22:25:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 22:25:01 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-29 22:25:01 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-29 22:25:01 LOG5 end_task: Level: (4) ID = <10428> Status = 0 0 0 0 ok 2008-Apr-29 22:25:01 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-29 22:25:01 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-29 22:25:01 LOG5 begin_task: Level: (4) ID = <10429> Status = 0 0 0 0 ok 2008-Apr-29 22:25:01 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-29 22:25:01 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-29 22:25:01 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-29 22:25:02 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-29 22:25:02 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-29 22:25:02 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-29 22:25:02 LOG5 begin_task: Level: (5) ID = <10430> Status = 0 0 0 0 ok 2008-Apr-29 22:25:02 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-29 22:25:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 22:25:02 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 1 dB --- beam 1: 8 6 dB 2008-Apr-29 22:25:02 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 5 dB 2008-Apr-29 22:25:02 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-29 22:25:02 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 2 3 dB 2008-Apr-29 22:25:02 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-29 22:25:02 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-29 22:25:02 LOG5 end_task: Level: (5) ID = <10430> Status = 0 0 0 0 ok 2008-Apr-29 22:25:02 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.910 1.102 ALFA beam 1: 0.890 1.052 2008-Apr-29 22:25:02 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.988 0.912 ALFA beam 3: 0.940 1.017 2008-Apr-29 22:25:02 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.898 0.908 ALFA beam 5: 0.997 1.107 2008-Apr-29 22:25:02 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.024 1.022 ALFA beam 7: 1.118 0.908 2008-Apr-29 22:25:02 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-29 22:25:02 LOG5 finish_task: Level: (4) ID = <10429> Status = 0 0 0 0 ok 2008-Apr-29 22:25:02 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-29 22:25:02 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 22:25:02 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-29 22:25:02 LOG5 end_task: Level: (4) ID = <10429> Status = 0 0 0 0 ok 2008-Apr-29 22:25:02 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-29 22:25:02 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-29 22:25:02 LOG5 finish_task: Level: (3) ID = <10427> Status = 0 0 0 0 ok 2008-Apr-29 22:25:02 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-29 22:25:02 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 22:25:02 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-29 22:25:02 LOG5 end_task: Level: (3) ID = <10427> Status = 0 0 0 0 ok 2008-Apr-29 22:25:02 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Karen O'Neil 2008-Apr-29 22:25:02 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Karen O'Neil 2008-Apr-29 22:25:02 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Karen O'Neil 2008-Apr-29 22:25:02 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Karen O'Neil 2008-Apr-29 22:25:02 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-29 22:25:02 START begin_task: Starting task 'WAPP calibration' 2008-Apr-29 22:25:02 LOG5 begin_task: Level: (3) ID = <10431> Status = 0 0 0 0 ok 2008-Apr-29 22:25:02 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-29 22:25:02 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-29 22:25:02 START begin_task: Starting task 'selecting calibration type' 2008-Apr-29 22:25:02 LOG5 begin_task: Level: (4) ID = <10432> Status = 0 0 0 0 ok 2008-Apr-29 22:25:02 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-29 22:25:03 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-29 22:25:03 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 22:25:03 START begin_task: Starting task 'waiting on setcal' 2008-Apr-29 22:25:03 LOG5 begin_task: Level: (5) ID = <10433> Status = 0 0 0 0 ok 2008-Apr-29 22:25:03 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Karen O'Neil' 2008-Apr-29 22:25:03 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-29 22:25:03 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 22:25:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 22:25:03 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-29 22:25:03 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-29 22:25:03 LOG5 end_task: Level: (5) ID = <10433> Status = 0 0 0 0 ok 2008-Apr-29 22:25:03 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-29 22:25:03 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-29 22:25:03 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-29 22:25:03 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-29 22:25:03 LOG5 begin_task: Level: (5) ID = <10434> Status = 0 0 0 0 ok 2008-Apr-29 22:25:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 22:25:03 NOTE WAPPDATA-new_file: New FITS file: wapp.20080429.a2048.0010.fits 2008-Apr-29 22:25:03 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080429.a2048.0010.fits} 2008-Apr-29 22:25:04 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-29 22:25:04 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-29 22:25:04 LOG5 end_task: Level: (5) ID = <10434> Status = 0 0 0 0 ok 2008-Apr-29 22:25:04 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-29 22:25:04 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-29 22:25:04 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-29 22:25:04 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-29 22:25:04 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-29 22:25:04 LOG5 begin_task: Level: (5) ID = <10435> Status = 0 0 0 0 ok 2008-Apr-29 22:25:04 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-29 22:25:04 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-29 22:25:04 LOG5 end_task: Level: (5) ID = <10435> Status = 0 0 0 0 ok 2008-Apr-29 22:25:04 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-29 22:25:04 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-29 22:25:04 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-29 22:25:04 LOG5 finish_task: Level: (4) ID = <10432> Status = 0 0 0 0 ok 2008-Apr-29 22:25:04 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-29 22:25:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 22:25:04 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-29 22:25:04 LOG5 end_task: Level: (4) ID = <10432> Status = 0 0 0 0 ok 2008-Apr-29 22:25:04 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-29 22:25:04 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-29 22:25:04 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-29 22:25:04 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-29 22:25:04 LOG5 begin_task: Level: (4) ID = <10436> Status = 0 0 0 0 ok 2008-Apr-29 22:25:04 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-29 22:25:04 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-29 22:25:04 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-29 22:25:04 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-29 22:25:04 LOG5 end_task: Level: (4) ID = <10436> Status = 0 0 0 0 ok 2008-Apr-29 22:25:04 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-29 22:25:04 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-29 22:25:04 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-29 22:25:04 LOG5 begin_task: Level: (4) ID = <10437> Status = 0 0 0 0 ok 2008-Apr-29 22:25:04 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-29 22:25:04 LOG5 log_alfabeam: Parameters: 12.134388888888889 7.4226944444444438 12.527900 2008.3310994498947 -4.000060 2008-Apr-29 22:25:04 LOG4 log_alfabeam: ALFABEAM 0 12.134388888888891 7.422694444444442 2008-Apr-29 22:25:04 LOG4 log_alfabeam: ALFABEAM 1 12.134008472197429 7.524588079328893 2008-Apr-29 22:25:04 LOG4 log_alfabeam: ALFABEAM 2 12.128691708780215 7.457248975813060 2008-Apr-29 22:25:04 LOG4 log_alfabeam: ALFABEAM 3 12.129074833137876 7.355161676003404 2008-Apr-29 22:25:04 LOG4 log_alfabeam: ALFABEAM 4 12.134818732874253 7.320663596826733 2008-Apr-29 22:25:04 LOG4 log_alfabeam: ALFABEAM 5 12.140098673047985 7.388764873248275 2008-Apr-29 22:25:04 LOG4 log_alfabeam: ALFABEAM 6 12.139671610462470 7.490602415949644 2008-Apr-29 22:25:04 INFO2 take_spectra: Starting WAPP scan: 812000139 2008-Apr-29 22:25:05 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-29 22:25:05 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-29 22:25:05 LOG5 begin_task: Level: (5) ID = <10438> Status = 0 0 0 0 ok 2008-Apr-29 22:25:05 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-29 22:25:05 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8706.00 2008-Apr-29 22:25:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.156398 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-29 22:25:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.156398 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 22:25:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.156398 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 22:25:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.156398 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 22:25:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.549 > 1.4)! 2008-Apr-29 22:25:11 LOG4 check_wapp_levels: WAPP-1 power levels: 1.254 1.290 1.206 1.425 2008-Apr-29 22:25:11 LOG4 check_wapp_levels: WAPP-2 power levels: 1.344 1.258 1.299 1.392 2008-Apr-29 22:25:11 LOG4 check_wapp_levels: WAPP-3 power levels: 1.249 1.267 1.383 1.491 2008-Apr-29 22:25:11 LOG4 check_wapp_levels: WAPP-4 power levels: 1.420 1.417 1.549 1.260 2008-Apr-29 22:25:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.156398 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 22:25:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.156398 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 22:25:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.156398 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 22:25:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.156398 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 22:25:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.156398 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 22:25:11 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-29 22:25:11 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-29 22:25:11 LOG5 end_task: Level: (5) ID = <10438> Status = 0 0 0 0 ok 2008-Apr-29 22:25:11 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-29 22:25:11 LOG5 end_task: Level: (4) ID = <10437> Status = 0 0 0 0 ok 2008-Apr-29 22:25:11 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-29 22:25:11 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-29 22:25:11 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-29 22:25:11 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-29 22:25:11 LOG5 begin_task: Level: (4) ID = <10439> Status = 0 0 0 0 ok 2008-Apr-29 22:25:12 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-29 22:25:12 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-29 22:25:12 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-29 22:25:12 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-29 22:25:12 LOG5 end_task: Level: (4) ID = <10439> Status = 0 0 0 0 ok 2008-Apr-29 22:25:12 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-29 22:25:12 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-29 22:25:12 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-29 22:25:12 LOG5 begin_task: Level: (4) ID = <10440> Status = 0 0 0 0 ok 2008-Apr-29 22:25:12 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-29 22:25:12 LOG5 log_alfabeam: Parameters: 12.134388888888889 7.4226944444444438 12.529850 2008.3310996717114 -4.000060 2008-Apr-29 22:25:12 LOG4 log_alfabeam: ALFABEAM 0 12.134388888888898 7.422694444444446 2008-Apr-29 22:25:12 LOG4 log_alfabeam: ALFABEAM 1 12.134022153196927 7.524599272046967 2008-Apr-29 22:25:12 LOG4 log_alfabeam: ALFABEAM 2 12.128696359297695 7.457418083306830 2008-Apr-29 22:25:12 LOG4 log_alfabeam: ALFABEAM 3 12.129065779370075 7.355319722691990 2008-Apr-29 22:25:12 LOG4 log_alfabeam: ALFABEAM 4 12.134804985690783 7.320651084386689 2008-Apr-29 22:25:12 LOG4 log_alfabeam: ALFABEAM 5 12.140094090301456 7.388594691922419 2008-Apr-29 22:25:12 LOG4 log_alfabeam: ALFABEAM 6 12.139680751473360 7.490444876076253 2008-Apr-29 22:25:12 INFO2 take_spectra: Starting WAPP scan: 812000140 2008-Apr-29 22:25:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-29 22:25:12 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-29 22:25:12 LOG5 begin_task: Level: (5) ID = <10441> Status = 0 0 0 0 ok 2008-Apr-29 22:25:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-29 22:25:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8713.00 2008-Apr-29 22:25:17 INFO5 check_wapp_levels: WAPP power levels are between 1.206 and 1.549 (still bad) 2008-Apr-29 22:25:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.156398 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-29 22:25:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.156398 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 22:25:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.156398 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 22:25:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.156398 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 22:25:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.156398 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 22:25:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.156398 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 22:25:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.156398 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 22:25:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.156398 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 22:25:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.156398 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 22:25:18 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-29 22:25:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-29 22:25:18 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-29 22:25:18 LOG5 end_task: Level: (5) ID = <10441> Status = 0 0 0 0 ok 2008-Apr-29 22:25:18 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-29 22:25:18 LOG5 end_task: Level: (4) ID = <10440> Status = 0 0 0 0 ok 2008-Apr-29 22:25:18 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-29 22:25:18 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-29 22:25:18 LOG5 finish_task: Level: (3) ID = <10431> Status = 0 0 0 0 ok 2008-Apr-29 22:25:18 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-29 22:25:18 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 22:25:18 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-29 22:25:18 LOG5 end_task: Level: (3) ID = <10431> Status = 0 0 0 0 ok 2008-Apr-29 22:25:19 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-29 22:25:19 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 27.75 and ZA = 12.32 2008-Apr-29 22:25:19 LOG3 track_source: Calling 'track_source AGESVC1A_p2_064 27.75 12.3213486640 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-29 22:25:19 START begin_task: Starting task 'sending tracking commands' 2008-Apr-29 22:25:19 LOG5 begin_task: Level: (3) ID = <10442> Status = 0 0 0 0 ok 2008-Apr-29 22:25:19 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_064} INFO {Slewing to source 'AGESVC1A_p2_064' ...} 2008-Apr-29 22:25:19 INFO1 track_source: Starting to track AGESVC1A_p2_064 2008-Apr-29 22:25:19 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_064" 2008-Apr-29 22:25:19 LOG3 vw_send: To DATATAKING: set ra 27.75 2008-Apr-29 22:25:19 LOG3 vw_send: To DATATAKING: set dec 12.3213486640 2008-Apr-29 22:25:19 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-29 22:25:19 LOG3 vw_send: To DATATAKING: pnt tr 27.75 12.3213486640 -CF 2008-Apr-29 22:25:19 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-29 22:25:19 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-29 22:25:19 LOG5 finish_task: Level: (3) ID = <10442> Status = 0 0 0 0 ok 2008-Apr-29 22:25:19 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-29 22:25:19 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 22:25:19 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-29 22:25:19 LOG5 end_task: Level: (3) ID = <10442> Status = 0 0 0 0 ok 2008-Apr-29 22:25:19 LOG1 fixed_driftmap: Parameters: HA = +00:23:00.0 Start = 12:32:27.2 LST = 12:31:54.5 diff = 32.7 secs 2008-Apr-29 22:25:19 INFO2 fixed_driftmap: Waiting 30.7 seconds for RA 12:09:27 2008-Apr-29 22:25:19 INFO2 lstwait: Waiting for 30.6 secs from LST 12:31:54 to LST 12:32:25 ... 2008-Apr-29 22:25:19 LOG4 send_obs_status: To obs_status: <1> TASKTIME 30.595639029640733 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-29 22:25:19 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-29 22:25:19 LOG5 begin_task: Level: (3) ID = <10443> Status = 0 0 0 0 ok 2008-Apr-29 22:25:19 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_064" 2008-Apr-29 22:25:19 LOG4 got_cormsg: From DATATAKING: set ra 27.75 2008-Apr-29 22:25:19 LOG4 got_cormsg: From DATATAKING: set dec 12.3213486640 2008-Apr-29 22:25:19 LOG4 got_cormsg: From DATATAKING: vw% 27.75 2008-Apr-29 22:25:19 LOG4 got_cormsg: From DATATAKING: vw% 12.3213486640 2008-Apr-29 22:25:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 22:25:19 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-29 22:25:19 LOG4 got_cormsg: From DATATAKING: pnt tr 27.75 12.3213486640 -CF 2008-Apr-29 22:25:19 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-29 22:25:19 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-29 22:25:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 22:25:23 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.896 and 1.119 2008-Apr-29 22:25:49 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-29 22:25:49 LOG5 end_task: Level: (3) ID = <10443> Status = 0 0 0 0 ok 2008-Apr-29 22:25:49 LOG4 lstwait: Finished waiting, the gui caused difference: 0.40299391999454315 2008-Apr-29 22:25:49 INFO3 lstwait: Finished waiting 2008-Apr-29 22:25:50 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-29 22:25:50 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-29 22:25:50 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-29 22:25:50 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-29 22:25:50 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-29 22:25:50 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-29 22:25:50 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-29 22:25:50 LOG5 begin_task: Level: (3) ID = <10444> Status = 0 0 0 0 ok 2008-Apr-29 22:25:50 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-29 22:25:50 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-29 22:25:50 INFO2 take_spectra: Starting WAPP scan: 812000141 2008-Apr-29 22:25:50 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-29 22:25:50 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-29 22:25:50 LOG5 begin_task: Level: (4) ID = <10445> Status = 0 0 0 0 ok 2008-Apr-29 22:25:50 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-29 22:25:50 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8751.00 2008-Apr-29 22:25:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.156398 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-29 22:25:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.156398 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 22:25:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.156398 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 22:25:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.156398 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 22:25:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.156398 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 22:25:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.156398 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 22:25:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.156398 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 22:25:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.156398 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 22:25:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.156398 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 22:27:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.753 < 0.8)! 2008-Apr-29 22:27:31 LOG4 check_wapp_levels: WAPP-1 power levels: 0.908 0.753 0.882 1.057 2008-Apr-29 22:27:31 LOG4 check_wapp_levels: WAPP-2 power levels: 0.987 0.914 0.939 1.017 2008-Apr-29 22:27:31 LOG4 check_wapp_levels: WAPP-3 power levels: 0.897 0.912 0.994 1.111 2008-Apr-29 22:27:31 LOG4 check_wapp_levels: WAPP-4 power levels: 1.022 1.019 1.115 0.906 2008-Apr-29 22:27:33 INFO5 check_wapp_levels: WAPP power levels are between 0.756 and 1.114 (still bad) 2008-Apr-29 22:27:35 INFO5 check_wapp_levels: WAPP power levels are between 0.757 and 1.114 (still bad) 2008-Apr-29 22:27:37 INFO5 check_wapp_levels: WAPP power levels are between 0.754 and 1.113 (still bad) 2008-Apr-29 22:27:39 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.804 and 1.114 2008-Apr-29 22:27:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.637 < 0.8)! 2008-Apr-29 22:27:42 LOG4 check_wapp_levels: WAPP-1 power levels: 0.911 0.637 0.884 1.057 2008-Apr-29 22:27:42 LOG4 check_wapp_levels: WAPP-2 power levels: 0.988 0.914 0.940 1.017 2008-Apr-29 22:27:42 LOG4 check_wapp_levels: WAPP-3 power levels: 0.897 0.910 0.997 1.111 2008-Apr-29 22:27:42 LOG4 check_wapp_levels: WAPP-4 power levels: 1.021 1.018 1.113 0.905 2008-Apr-29 22:27:44 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.885 and 1.113 2008-Apr-29 22:38:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (2.327 > 1.4)! 2008-Apr-29 22:38:51 LOG4 check_wapp_levels: WAPP-1 power levels: 0.939 2.327 0.909 1.067 2008-Apr-29 22:38:51 LOG4 check_wapp_levels: WAPP-2 power levels: 0.990 0.918 0.942 1.019 2008-Apr-29 22:38:51 LOG4 check_wapp_levels: WAPP-3 power levels: 0.908 0.913 1.005 1.113 2008-Apr-29 22:38:51 LOG4 check_wapp_levels: WAPP-4 power levels: 1.031 1.027 1.125 0.913 2008-Apr-29 22:38:53 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.908 and 1.130 2008-Apr-29 22:38:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.787 < 0.8)! 2008-Apr-29 22:38:55 LOG4 check_wapp_levels: WAPP-1 power levels: 0.938 0.787 0.911 1.071 2008-Apr-29 22:38:55 LOG4 check_wapp_levels: WAPP-2 power levels: 0.991 0.917 0.942 1.018 2008-Apr-29 22:38:55 LOG4 check_wapp_levels: WAPP-3 power levels: 0.907 0.914 1.007 1.114 2008-Apr-29 22:38:55 LOG4 check_wapp_levels: WAPP-4 power levels: 1.037 1.033 1.132 0.918 2008-Apr-29 22:38:57 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 6.838 (still bad) 2008-Apr-29 22:38:59 INFO5 check_wapp_levels: WAPP power levels are between 0.757 and 1.131 (still bad) 2008-Apr-29 22:39:02 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.907 and 1.129 2008-Apr-29 22:39:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.735 < 0.8)! 2008-Apr-29 22:39:16 LOG4 check_wapp_levels: WAPP-1 power levels: 0.941 0.735 0.915 1.074 2008-Apr-29 22:39:16 LOG4 check_wapp_levels: WAPP-2 power levels: 0.994 0.916 0.941 1.018 2008-Apr-29 22:39:16 LOG4 check_wapp_levels: WAPP-3 power levels: 0.905 0.911 1.005 1.114 2008-Apr-29 22:39:16 LOG4 check_wapp_levels: WAPP-4 power levels: 1.024 1.022 1.117 0.908 2008-Apr-29 22:39:18 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.808 and 1.117 2008-Apr-29 22:40:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.799 < 0.8)! 2008-Apr-29 22:40:31 LOG4 check_wapp_levels: WAPP-1 power levels: 0.920 0.799 0.891 1.063 2008-Apr-29 22:40:31 LOG4 check_wapp_levels: WAPP-2 power levels: 0.996 0.922 0.944 1.020 2008-Apr-29 22:40:31 LOG4 check_wapp_levels: WAPP-3 power levels: 0.899 0.915 1.003 1.115 2008-Apr-29 22:40:31 LOG4 check_wapp_levels: WAPP-4 power levels: 1.025 1.023 1.117 0.908 2008-Apr-29 22:40:33 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.800 and 1.116 2008-Apr-29 22:40:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.799 < 0.8)! 2008-Apr-29 22:40:37 LOG4 check_wapp_levels: WAPP-1 power levels: 0.922 0.799 0.890 1.064 2008-Apr-29 22:40:37 LOG4 check_wapp_levels: WAPP-2 power levels: 0.997 0.923 0.944 1.021 2008-Apr-29 22:40:37 LOG4 check_wapp_levels: WAPP-3 power levels: 0.900 0.913 1.001 1.114 2008-Apr-29 22:40:37 LOG4 check_wapp_levels: WAPP-4 power levels: 1.025 1.023 1.116 0.907 2008-Apr-29 22:40:39 INFO5 check_wapp_levels: WAPP power levels are between 0.797 and 1.116 (still bad) 2008-Apr-29 22:40:41 INFO5 check_wapp_levels: WAPP power levels are between 0.798 and 1.116 (still bad) 2008-Apr-29 22:40:43 INFO5 check_wapp_levels: WAPP power levels are between 0.797 and 1.115 (still bad) 2008-Apr-29 22:40:45 INFO5 check_wapp_levels: WAPP power levels are between 0.797 and 1.117 (still bad) 2008-Apr-29 22:40:47 INFO5 check_wapp_levels: WAPP power levels are between 0.797 and 1.116 (still bad) 2008-Apr-29 22:40:49 INFO5 check_wapp_levels: WAPP power levels are between 0.797 and 1.116 (still bad) 2008-Apr-29 22:40:51 INFO5 check_wapp_levels: WAPP power levels are between 0.797 and 1.116 (still bad) 2008-Apr-29 22:40:53 INFO5 check_wapp_levels: WAPP power levels are between 0.796 and 1.116 (still bad) 2008-Apr-29 22:40:55 INFO5 check_wapp_levels: WAPP power levels are between 0.797 and 1.117 (still bad) 2008-Apr-29 22:40:57 INFO5 check_wapp_levels: WAPP power levels are between 0.797 and 1.117 (still bad) 2008-Apr-29 22:40:59 INFO5 check_wapp_levels: WAPP power levels are between 0.795 and 1.116 (still bad) 2008-Apr-29 22:41:01 INFO5 check_wapp_levels: WAPP power levels are between 0.795 and 1.117 (still bad) 2008-Apr-29 22:41:03 INFO5 check_wapp_levels: WAPP power levels are between 0.795 and 1.116 (still bad) 2008-Apr-29 22:41:05 INFO5 check_wapp_levels: WAPP power levels are between 0.795 and 1.118 (still bad) 2008-Apr-29 22:41:07 INFO5 check_wapp_levels: WAPP power levels are between 0.794 and 1.117 (still bad) 2008-Apr-29 22:41:09 INFO5 check_wapp_levels: WAPP power levels are between 0.793 and 1.118 (still bad) 2008-Apr-29 22:41:11 INFO5 check_wapp_levels: WAPP power levels are between 0.794 and 1.119 (still bad) 2008-Apr-29 22:41:13 INFO5 check_wapp_levels: WAPP power levels are between 0.792 and 1.118 (still bad) 2008-Apr-29 22:41:15 INFO5 check_wapp_levels: WAPP power levels are between 0.793 and 1.117 (still bad) 2008-Apr-29 22:41:17 INFO5 check_wapp_levels: WAPP power levels are between 0.793 and 1.117 (still bad) 2008-Apr-29 22:41:19 INFO5 check_wapp_levels: WAPP power levels are between 0.793 and 1.118 (still bad) 2008-Apr-29 22:41:21 INFO5 check_wapp_levels: WAPP power levels are between 0.792 and 1.118 (still bad) 2008-Apr-29 22:41:23 INFO5 check_wapp_levels: WAPP power levels are between 0.792 and 1.117 (still bad) 2008-Apr-29 22:41:25 INFO5 check_wapp_levels: WAPP power levels are between 0.794 and 1.118 (still bad) 2008-Apr-29 22:41:27 INFO5 check_wapp_levels: WAPP power levels are between 0.794 and 1.118 (still bad) 2008-Apr-29 22:41:29 INFO5 check_wapp_levels: WAPP power levels are between 0.794 and 1.118 (still bad) 2008-Apr-29 22:41:31 INFO5 check_wapp_levels: WAPP power levels are between 0.792 and 1.117 (still bad) 2008-Apr-29 22:41:33 INFO5 check_wapp_levels: WAPP power levels are between 0.793 and 1.117 (still bad) 2008-Apr-29 22:41:35 INFO5 check_wapp_levels: WAPP power levels are between 0.793 and 1.117 (still bad) 2008-Apr-29 22:41:37 INFO5 check_wapp_levels: WAPP power levels are between 0.793 and 1.118 (still bad) 2008-Apr-29 22:41:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.792 < 0.8)! 2008-Apr-29 22:41:39 LOG4 check_wapp_levels: WAPP-1 power levels: 0.917 0.792 0.886 1.063 2008-Apr-29 22:41:39 LOG4 check_wapp_levels: WAPP-2 power levels: 0.992 0.917 0.945 1.022 2008-Apr-29 22:41:39 LOG4 check_wapp_levels: WAPP-3 power levels: 0.902 0.917 0.998 1.117 2008-Apr-29 22:41:39 LOG4 check_wapp_levels: WAPP-4 power levels: 1.028 1.022 1.119 0.909 2008-Apr-29 22:41:41 INFO5 check_wapp_levels: WAPP power levels are between 0.792 and 1.118 (still bad) 2008-Apr-29 22:41:43 INFO5 check_wapp_levels: WAPP power levels are between 0.792 and 1.119 (still bad) 2008-Apr-29 22:41:45 INFO5 check_wapp_levels: WAPP power levels are between 0.790 and 1.119 (still bad) 2008-Apr-29 22:41:47 INFO5 check_wapp_levels: WAPP power levels are between 0.791 and 1.119 (still bad) 2008-Apr-29 22:41:49 INFO5 check_wapp_levels: WAPP power levels are between 0.792 and 1.121 (still bad) 2008-Apr-29 22:41:51 INFO5 check_wapp_levels: WAPP power levels are between 0.792 and 1.121 (still bad) 2008-Apr-29 22:41:54 INFO5 check_wapp_levels: WAPP power levels are between 0.792 and 1.122 (still bad) 2008-Apr-29 22:41:56 INFO5 check_wapp_levels: WAPP power levels are between 0.790 and 1.122 (still bad) 2008-Apr-29 22:41:58 INFO5 check_wapp_levels: WAPP power levels are between 0.790 and 1.122 (still bad) 2008-Apr-29 22:42:00 INFO5 check_wapp_levels: WAPP power levels are between 0.791 and 1.121 (still bad) 2008-Apr-29 22:42:02 INFO5 check_wapp_levels: WAPP power levels are between 0.790 and 1.122 (still bad) 2008-Apr-29 22:42:04 INFO5 check_wapp_levels: WAPP power levels are between 0.788 and 1.120 (still bad) 2008-Apr-29 22:42:06 INFO5 check_wapp_levels: WAPP power levels are between 0.789 and 1.119 (still bad) 2008-Apr-29 22:42:08 INFO5 check_wapp_levels: WAPP power levels are between 0.789 and 1.119 (still bad) 2008-Apr-29 22:42:10 INFO5 check_wapp_levels: WAPP power levels are between 0.789 and 1.118 (still bad) 2008-Apr-29 22:42:12 INFO5 check_wapp_levels: WAPP power levels are between 0.789 and 1.118 (still bad) 2008-Apr-29 22:42:14 INFO5 check_wapp_levels: WAPP power levels are between 0.790 and 1.118 (still bad) 2008-Apr-29 22:42:16 INFO5 check_wapp_levels: WAPP power levels are between 0.789 and 1.118 (still bad) 2008-Apr-29 22:42:18 INFO5 check_wapp_levels: WAPP power levels are between 0.788 and 1.118 (still bad) 2008-Apr-29 22:42:20 INFO5 check_wapp_levels: WAPP power levels are between 0.788 and 1.118 (still bad) 2008-Apr-29 22:42:22 INFO5 check_wapp_levels: WAPP power levels are between 0.789 and 1.118 (still bad) 2008-Apr-29 22:42:24 INFO5 check_wapp_levels: WAPP power levels are between 0.788 and 1.118 (still bad) 2008-Apr-29 22:42:26 INFO5 check_wapp_levels: WAPP power levels are between 0.788 and 1.118 (still bad) 2008-Apr-29 22:42:28 INFO5 check_wapp_levels: WAPP power levels are between 0.788 and 1.118 (still bad) 2008-Apr-29 22:42:30 INFO5 check_wapp_levels: WAPP power levels are between 0.787 and 1.118 (still bad) 2008-Apr-29 22:42:32 INFO5 check_wapp_levels: WAPP power levels are between 0.787 and 1.118 (still bad) 2008-Apr-29 22:42:34 INFO5 check_wapp_levels: WAPP power levels are between 0.788 and 1.117 (still bad) 2008-Apr-29 22:42:36 INFO5 check_wapp_levels: WAPP power levels are between 0.787 and 1.117 (still bad) 2008-Apr-29 22:42:38 INFO5 check_wapp_levels: WAPP power levels are between 0.787 and 1.117 (still bad) 2008-Apr-29 22:42:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.786 < 0.8)! 2008-Apr-29 22:42:40 LOG4 check_wapp_levels: WAPP-1 power levels: 0.912 0.786 0.884 1.061 2008-Apr-29 22:42:40 LOG4 check_wapp_levels: WAPP-2 power levels: 0.992 0.918 0.947 1.026 2008-Apr-29 22:42:40 LOG4 check_wapp_levels: WAPP-3 power levels: 0.906 0.918 0.998 1.116 2008-Apr-29 22:42:40 LOG4 check_wapp_levels: WAPP-4 power levels: 1.027 1.024 1.117 0.909 2008-Apr-29 22:42:42 INFO5 check_wapp_levels: WAPP power levels are between 0.785 and 1.117 (still bad) 2008-Apr-29 22:42:44 INFO5 check_wapp_levels: WAPP power levels are between 0.786 and 1.117 (still bad) 2008-Apr-29 22:42:46 INFO5 check_wapp_levels: WAPP power levels are between 0.786 and 1.118 (still bad) 2008-Apr-29 22:42:48 INFO5 check_wapp_levels: WAPP power levels are between 0.786 and 1.118 (still bad) 2008-Apr-29 22:42:50 INFO5 check_wapp_levels: WAPP power levels are between 0.786 and 1.118 (still bad) 2008-Apr-29 22:42:52 INFO5 check_wapp_levels: WAPP power levels are between 0.787 and 1.118 (still bad) 2008-Apr-29 22:42:54 INFO5 check_wapp_levels: WAPP power levels are between 0.786 and 1.118 (still bad) 2008-Apr-29 22:42:56 INFO5 check_wapp_levels: WAPP power levels are between 0.787 and 1.119 (still bad) 2008-Apr-29 22:42:58 INFO5 check_wapp_levels: WAPP power levels are between 0.787 and 1.119 (still bad) 2008-Apr-29 22:43:00 INFO5 check_wapp_levels: WAPP power levels are between 0.789 and 1.116 (still bad) 2008-Apr-29 22:43:02 INFO5 check_wapp_levels: WAPP power levels are between 0.787 and 1.118 (still bad) 2008-Apr-29 22:43:04 INFO5 check_wapp_levels: WAPP power levels are between 0.786 and 1.118 (still bad) 2008-Apr-29 22:43:06 INFO5 check_wapp_levels: WAPP power levels are between 0.788 and 1.118 (still bad) 2008-Apr-29 22:43:08 INFO5 check_wapp_levels: WAPP power levels are between 0.787 and 1.117 (still bad) 2008-Apr-29 22:43:10 INFO5 check_wapp_levels: WAPP power levels are between 0.787 and 1.118 (still bad) 2008-Apr-29 22:43:12 INFO5 check_wapp_levels: WAPP power levels are between 0.786 and 1.118 (still bad) 2008-Apr-29 22:43:15 INFO5 check_wapp_levels: WAPP power levels are between 0.785 and 1.119 (still bad) 2008-Apr-29 22:43:17 INFO5 check_wapp_levels: WAPP power levels are between 0.786 and 1.119 (still bad) 2008-Apr-29 22:43:19 INFO5 check_wapp_levels: WAPP power levels are between 0.786 and 1.118 (still bad) 2008-Apr-29 22:43:21 INFO5 check_wapp_levels: WAPP power levels are between 0.785 and 1.118 (still bad) 2008-Apr-29 22:43:23 INFO5 check_wapp_levels: WAPP power levels are between 0.785 and 1.119 (still bad) 2008-Apr-29 22:43:25 INFO5 check_wapp_levels: WAPP power levels are between 0.785 and 1.117 (still bad) 2008-Apr-29 22:43:27 INFO5 check_wapp_levels: WAPP power levels are between 0.785 and 1.117 (still bad) 2008-Apr-29 22:43:29 INFO5 check_wapp_levels: WAPP power levels are between 0.787 and 1.119 (still bad) 2008-Apr-29 22:43:31 INFO5 check_wapp_levels: WAPP power levels are between 0.785 and 1.118 (still bad) 2008-Apr-29 22:43:33 INFO5 check_wapp_levels: WAPP power levels are between 0.786 and 1.119 (still bad) 2008-Apr-29 22:43:35 INFO5 check_wapp_levels: WAPP power levels are between 0.786 and 1.118 (still bad) 2008-Apr-29 22:43:37 INFO5 check_wapp_levels: WAPP power levels are between 0.788 and 1.119 (still bad) 2008-Apr-29 22:43:39 INFO5 check_wapp_levels: WAPP power levels are between 0.788 and 1.118 (still bad) 2008-Apr-29 22:43:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.788 < 0.8)! 2008-Apr-29 22:43:41 LOG4 check_wapp_levels: WAPP-1 power levels: 0.921 0.788 0.883 1.060 2008-Apr-29 22:43:41 LOG4 check_wapp_levels: WAPP-2 power levels: 0.992 0.918 0.945 1.020 2008-Apr-29 22:43:41 LOG4 check_wapp_levels: WAPP-3 power levels: 0.902 0.914 0.999 1.117 2008-Apr-29 22:43:41 LOG4 check_wapp_levels: WAPP-4 power levels: 1.025 1.022 1.118 0.909 2008-Apr-29 22:43:43 INFO5 check_wapp_levels: WAPP power levels are between 0.789 and 1.118 (still bad) 2008-Apr-29 22:43:45 INFO5 check_wapp_levels: WAPP power levels are between 0.787 and 1.119 (still bad) 2008-Apr-29 22:43:47 INFO5 check_wapp_levels: WAPP power levels are between 0.788 and 1.118 (still bad) 2008-Apr-29 22:43:49 INFO5 check_wapp_levels: WAPP power levels are between 0.788 and 1.118 (still bad) 2008-Apr-29 22:43:51 INFO5 check_wapp_levels: WAPP power levels are between 0.787 and 1.117 (still bad) 2008-Apr-29 22:43:53 INFO5 check_wapp_levels: WAPP power levels are between 0.785 and 1.117 (still bad) 2008-Apr-29 22:43:55 INFO5 check_wapp_levels: WAPP power levels are between 0.785 and 1.118 (still bad) 2008-Apr-29 22:43:57 INFO5 check_wapp_levels: WAPP power levels are between 0.784 and 1.118 (still bad) 2008-Apr-29 22:43:59 INFO5 check_wapp_levels: WAPP power levels are between 0.784 and 1.121 (still bad) 2008-Apr-29 22:44:01 INFO5 check_wapp_levels: WAPP power levels are between 0.782 and 1.123 (still bad) 2008-Apr-29 22:44:03 INFO5 check_wapp_levels: WAPP power levels are between 0.784 and 1.125 (still bad) 2008-Apr-29 22:44:05 INFO5 check_wapp_levels: WAPP power levels are between 0.783 and 1.128 (still bad) 2008-Apr-29 22:44:07 INFO5 check_wapp_levels: WAPP power levels are between 0.781 and 1.131 (still bad) 2008-Apr-29 22:44:09 INFO5 check_wapp_levels: WAPP power levels are between 0.781 and 1.131 (still bad) 2008-Apr-29 22:44:11 INFO5 check_wapp_levels: WAPP power levels are between 0.781 and 1.127 (still bad) 2008-Apr-29 22:44:13 INFO5 check_wapp_levels: WAPP power levels are between 0.782 and 1.130 (still bad) 2008-Apr-29 22:44:15 INFO5 check_wapp_levels: WAPP power levels are between 0.783 and 1.139 (still bad) 2008-Apr-29 22:44:17 INFO5 check_wapp_levels: WAPP power levels are between 0.783 and 1.150 (still bad) 2008-Apr-29 22:44:19 INFO5 check_wapp_levels: WAPP power levels are between 0.783 and 1.161 (still bad) 2008-Apr-29 22:44:21 INFO5 check_wapp_levels: WAPP power levels are between 0.783 and 1.170 (still bad) 2008-Apr-29 22:44:23 INFO5 check_wapp_levels: WAPP power levels are between 0.783 and 1.175 (still bad) 2008-Apr-29 22:44:25 INFO5 check_wapp_levels: WAPP power levels are between 0.782 and 1.189 (still bad) 2008-Apr-29 22:44:27 INFO5 check_wapp_levels: WAPP power levels are between 0.783 and 1.197 (still bad) 2008-Apr-29 22:44:29 INFO5 check_wapp_levels: WAPP power levels are between 0.784 and 1.196 (still bad) 2008-Apr-29 22:44:31 INFO5 check_wapp_levels: WAPP power levels are between 0.781 and 1.185 (still bad) 2008-Apr-29 22:44:33 INFO5 check_wapp_levels: WAPP power levels are between 0.782 and 1.167 (still bad) 2008-Apr-29 22:44:35 INFO5 check_wapp_levels: WAPP power levels are between 0.784 and 1.151 (still bad) 2008-Apr-29 22:44:37 INFO5 check_wapp_levels: WAPP power levels are between 0.791 and 1.135 (still bad) 2008-Apr-29 22:44:40 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.804 and 1.124 2008-Apr-29 22:45:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.793 < 0.8)! 2008-Apr-29 22:45:00 LOG4 check_wapp_levels: WAPP-1 power levels: 0.929 0.793 0.881 1.060 2008-Apr-29 22:45:00 LOG4 check_wapp_levels: WAPP-2 power levels: 1.018 0.943 0.947 1.022 2008-Apr-29 22:45:00 LOG4 check_wapp_levels: WAPP-3 power levels: 0.901 0.916 1.002 1.116 2008-Apr-29 22:45:00 LOG4 check_wapp_levels: WAPP-4 power levels: 1.027 1.024 1.118 0.910 2008-Apr-29 22:45:02 INFO5 check_wapp_levels: WAPP power levels are between 0.785 and 1.118 (still bad) 2008-Apr-29 22:45:04 INFO5 check_wapp_levels: WAPP power levels are between 0.781 and 1.117 (still bad) 2008-Apr-29 22:45:06 INFO5 check_wapp_levels: WAPP power levels are between 0.782 and 1.118 (still bad) 2008-Apr-29 22:45:08 INFO5 check_wapp_levels: WAPP power levels are between 0.783 and 1.117 (still bad) 2008-Apr-29 22:45:10 INFO5 check_wapp_levels: WAPP power levels are between 0.783 and 1.117 (still bad) 2008-Apr-29 22:45:12 INFO5 check_wapp_levels: WAPP power levels are between 0.784 and 1.118 (still bad) 2008-Apr-29 22:45:14 INFO5 check_wapp_levels: WAPP power levels are between 0.783 and 1.118 (still bad) 2008-Apr-29 22:45:16 INFO5 check_wapp_levels: WAPP power levels are between 0.781 and 1.118 (still bad) 2008-Apr-29 22:45:18 INFO5 check_wapp_levels: WAPP power levels are between 0.781 and 1.117 (still bad) 2008-Apr-29 22:45:20 INFO5 check_wapp_levels: WAPP power levels are between 0.780 and 1.117 (still bad) 2008-Apr-29 22:45:22 INFO5 check_wapp_levels: WAPP power levels are between 0.780 and 1.116 (still bad) 2008-Apr-29 22:45:24 INFO5 check_wapp_levels: WAPP power levels are between 0.781 and 1.117 (still bad) 2008-Apr-29 22:45:26 INFO5 check_wapp_levels: WAPP power levels are between 0.783 and 1.117 (still bad) 2008-Apr-29 22:45:28 INFO5 check_wapp_levels: WAPP power levels are between 0.782 and 1.118 (still bad) 2008-Apr-29 22:45:30 INFO5 check_wapp_levels: WAPP power levels are between 0.781 and 1.118 (still bad) 2008-Apr-29 22:45:32 INFO5 check_wapp_levels: WAPP power levels are between 0.779 and 1.117 (still bad) 2008-Apr-29 22:45:34 INFO5 check_wapp_levels: WAPP power levels are between 0.782 and 1.119 (still bad) 2008-Apr-29 22:45:36 INFO5 check_wapp_levels: WAPP power levels are between 0.781 and 1.118 (still bad) 2008-Apr-29 22:45:38 INFO5 check_wapp_levels: WAPP power levels are between 0.782 and 1.118 (still bad) 2008-Apr-29 22:45:40 INFO5 check_wapp_levels: WAPP power levels are between 0.780 and 1.118 (still bad) 2008-Apr-29 22:45:42 INFO5 check_wapp_levels: WAPP power levels are between 0.780 and 1.118 (still bad) 2008-Apr-29 22:45:44 INFO5 check_wapp_levels: WAPP power levels are between 0.781 and 1.118 (still bad) 2008-Apr-29 22:45:46 INFO5 check_wapp_levels: WAPP power levels are between 0.779 and 1.118 (still bad) 2008-Apr-29 22:45:48 INFO5 check_wapp_levels: WAPP power levels are between 0.780 and 1.118 (still bad) 2008-Apr-29 22:45:50 INFO5 check_wapp_levels: WAPP power levels are between 0.781 and 1.118 (still bad) 2008-Apr-29 22:45:51 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-29 22:45:51 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-29 22:45:51 LOG5 end_task: Level: (4) ID = <10445> Status = 0 0 0 0 ok 2008-Apr-29 22:45:51 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-29 22:45:51 LOG5 end_task: Level: (3) ID = <10444> Status = 0 0 0 0 ok 2008-Apr-29 22:45:51 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-29 22:45:51 LOG5 finish_task: Level: (2) ID = <10411> Status = 0 0 0 0 ok 2008-Apr-29 22:45:51 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-29 22:45:51 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-29 22:45:51 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-29 22:45:51 LOG5 end_task: Level: (2) ID = <10411> Status = 0 0 0 0 ok 2008-Apr-29 22:45:51 COMMAND run_command_line: EXECUTING command 47: 'FIXEDDRIFT az=46.90 alfaangle=-20.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_066 ra=120900.00 dec=72230.00' 2008-Apr-29 22:45:51 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-29 22:45:52 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-29 22:45:52 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 46.90 -20.8 hcorcal 5 tracking no first 1 AGESVC1A_p2_066 120900.00 72230.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-29 22:45:52 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-29 22:45:52 LOG5 begin_task: Level: (2) ID = <10446> Status = 0 0 0 0 ok 2008-Apr-29 22:45:52 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGESVC1A_p2_064' 2008-Apr-29 22:45:52 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-29 22:45:52 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1A_p2_066} 2008-Apr-29 22:45:52 INFO3 fixed_driftmap: Sending telescope to Az = 46.90 and ZA = 15.71 2008-Apr-29 22:45:52 LOG3 track_source: Calling 'track_source AGESVC1A_p2_066 46.90 15.7102310375 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-29 22:45:52 START begin_task: Starting task 'sending tracking commands' 2008-Apr-29 22:45:52 LOG5 begin_task: Level: (3) ID = <10447> Status = 0 0 0 0 ok 2008-Apr-29 22:45:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_066} INFO {Slewing to source 'AGESVC1A_p2_066' ...} 2008-Apr-29 22:45:52 INFO1 track_source: Starting to track AGESVC1A_p2_066 2008-Apr-29 22:45:52 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_066" 2008-Apr-29 22:45:52 LOG3 vw_send: To DATATAKING: set ra 46.90 2008-Apr-29 22:45:52 LOG3 vw_send: To DATATAKING: set dec 15.7102310375 2008-Apr-29 22:45:52 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-29 22:45:52 LOG3 vw_send: To DATATAKING: pnt tr 46.90 15.7102310375 -CF 2008-Apr-29 22:45:52 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-29 22:45:52 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-29 22:45:52 LOG5 finish_task: Level: (3) ID = <10447> Status = 0 0 0 0 ok 2008-Apr-29 22:45:52 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-29 22:45:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 22:45:52 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-29 22:45:52 LOG5 end_task: Level: (3) ID = <10447> Status = 0 0 0 0 ok 2008-Apr-29 22:45:52 START begin_task: Starting task 'rotate ALFA to -20.8 degrees' 2008-Apr-29 22:45:52 LOG5 begin_task: Level: (3) ID = <10448> Status = 0 0 0 0 ok 2008-Apr-29 22:45:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -20.8 degrees ...} 2008-Apr-29 22:45:52 INFO2 rotate_alfa: ALFA commanded to -20.8 degrees 2008-Apr-29 22:45:52 LOG3 sock_errsend: To ALFAMOTOR: POSITION -20.8 REPLY 2008-Apr-29 22:45:52 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-29 22:45:52 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-29 22:45:52 LOG5 begin_task: Level: (4) ID = <10449> Status = 0 0 0 0 ok 2008-Apr-29 22:45:52 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_066" 2008-Apr-29 22:45:52 LOG4 got_cormsg: From DATATAKING: set ra 46.90 2008-Apr-29 22:45:52 LOG4 got_cormsg: From DATATAKING: set dec 15.7102310375 2008-Apr-29 22:45:52 LOG4 got_cormsg: From DATATAKING: vw% 46.90 2008-Apr-29 22:45:52 LOG4 got_cormsg: From DATATAKING: vw% 15.7102310375 2008-Apr-29 22:45:52 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 22:45:52 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-29 22:45:52 LOG4 got_cormsg: From DATATAKING: pnt tr 46.90 15.7102310375 -CF 2008-Apr-29 22:45:52 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-29 22:45:52 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2008-Apr-29 22:45:52 INFO5 check_wapp_levels: WAPP power levels are between 0.780 and 1.118 (still bad) 2008-Apr-29 22:46:03 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-29 22:46:03 INFO3 alfa_motor: ALFA rotator in-position -20.80 degrees 2008-Apr-29 22:46:03 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-29 22:46:03 LOG5 end_task: Level: (4) ID = <10449> Status = 0 0 0 0 ok 2008-Apr-29 22:46:03 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-29 22:46:03 STOP finish_task: Finishing task 'rotate ALFA to -20.8 degrees' 2008-Apr-29 22:46:03 LOG5 finish_task: Level: (3) ID = <10448> Status = 0 0 0 0 ok 2008-Apr-29 22:46:03 INFO2 finish_task: DONE finished configuration: rotating ALFA to -20.8 degrees 2008-Apr-29 22:46:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 22:46:03 STOP end_task: Finishing task 'rotate ALFA to -20.8 degrees' with status 'OK' 2008-Apr-29 22:46:03 LOG5 end_task: Level: (3) ID = <10448> Status = 0 0 0 0 ok 2008-Apr-29 22:46:03 START begin_task: Starting task 'waiting on telescope' 2008-Apr-29 22:46:03 LOG5 begin_task: Level: (3) ID = <10450> Status = 0 0 0 0 ok 2008-Apr-29 22:46:03 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-29 22:46:03 LOG3 waittrk: Start waittrk 5 2008-Apr-29 22:46:03 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-29 22:46:03 LOG5 begin_task: Level: (4) ID = <10451> Status = 0 0 0 0 ok 2008-Apr-29 22:46:08 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-29 22:46:08 LOG5 end_task: Level: (4) ID = <10451> Status = 0 0 0 0 ok 2008-Apr-29 22:46:08 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-29 22:46:08 LOG5 begin_task: Level: (4) ID = <10452> Status = 0 0 0 0 ok 2008-Apr-29 22:47:24 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-29 22:47:24 LOG5 end_task: Level: (4) ID = <10452> Status = 0 0 0 0 ok 2008-Apr-29 22:47:24 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-29 22:47:24 INFO2 waittrk: Now tracking AGESVC1A_p2_066 2008-Apr-29 22:47:24 LOG4 waittrk: Current telescope position: Az = 406.68 ZA = 15.70 2008-Apr-29 22:47:24 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-29 22:47:24 LOG5 finish_task: Level: (3) ID = <10450> Status = 0 0 0 0 ok 2008-Apr-29 22:47:24 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-29 22:47:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 22:47:24 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-29 22:47:24 LOG5 end_task: Level: (3) ID = <10450> Status = 0 0 0 0 ok 2008-Apr-29 22:47:24 START begin_task: Starting task 'selecting calibration type' 2008-Apr-29 22:47:24 LOG5 begin_task: Level: (3) ID = <10453> Status = 0 0 0 0 ok 2008-Apr-29 22:47:24 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-29 22:47:24 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-29 22:47:24 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 22:47:24 START begin_task: Starting task 'waiting on setcal' 2008-Apr-29 22:47:24 LOG5 begin_task: Level: (4) ID = <10454> Status = 0 0 0 0 ok 2008-Apr-29 22:47:24 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-29 22:47:24 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 22:47:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 22:47:25 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-29 22:47:25 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-29 22:47:25 LOG5 end_task: Level: (4) ID = <10454> Status = 0 0 0 0 ok 2008-Apr-29 22:47:25 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-29 22:47:25 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-29 22:47:25 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-29 22:47:25 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-29 22:47:25 LOG5 begin_task: Level: (4) ID = <10455> Status = 0 0 0 0 ok 2008-Apr-29 22:47:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 22:47:25 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-29 22:47:25 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-29 22:47:25 LOG5 end_task: Level: (4) ID = <10455> Status = 0 0 0 0 ok 2008-Apr-29 22:47:25 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-29 22:47:25 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-29 22:47:25 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-29 22:47:25 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-29 22:47:25 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-29 22:47:25 LOG5 begin_task: Level: (4) ID = <10456> Status = 0 0 0 0 ok 2008-Apr-29 22:47:25 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-29 22:47:25 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-29 22:47:25 LOG5 end_task: Level: (4) ID = <10456> Status = 0 0 0 0 ok 2008-Apr-29 22:47:25 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-29 22:47:25 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-29 22:47:25 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-29 22:47:25 LOG5 finish_task: Level: (3) ID = <10453> Status = 0 0 0 0 ok 2008-Apr-29 22:47:25 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-29 22:47:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 22:47:25 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-29 22:47:25 LOG5 end_task: Level: (3) ID = <10453> Status = 0 0 0 0 ok 2008-Apr-29 22:47:25 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2008-Apr-29 22:47:25 INFO2 astwait: Waiting for 21 seconds from 02:47:25 to 02:47:46 UTC ... 2008-Apr-29 22:47:25 LOG4 send_obs_status: To obs_status: <1> TASKTIME 21 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-29 22:47:25 START begin_task: Starting task 'waiting on waiting for AST time' 2008-Apr-29 22:47:25 LOG5 begin_task: Level: (3) ID = <10457> Status = 0 0 0 0 ok 2008-Apr-29 22:47:46 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2008-Apr-29 22:47:46 LOG5 end_task: Level: (3) ID = <10457> Status = 0 0 0 0 ok 2008-Apr-29 22:47:46 INFO3 astwait: Finished waiting 2008-Apr-29 22:47:46 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-29 22:47:46 LOG5 dopset_later: Calling 'dopset_later 61.354806418990137' 2008-Apr-29 22:47:46 INFO3 dopset_later: Setting Doppler correction for 22:48:46 (61.4 seconds from now) 2008-Apr-29 22:47:46 LOG5 antvel: Calling 'antvel 46.900000 15.710231 F 61.354806418990137' 2008-Apr-29 22:47:46 LOG2 antvel: Parameters to Doppler: Heliocentric 96526 2008 120 0.0 2008-Apr-29 22:47:46 INFO5 antvel: Computed antenna velocity: +18.93433 km/s 2008-Apr-29 22:47:46 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=18.934333139100001 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-29 22:47:46 INFO4 dopset_gen: New sky frequencies: 1381.156197 1381.156197 1381.156197 1381.156197 1381.156197 1381.156197 1381.156197 1381.156197 1381.156197 2008-Apr-29 22:47:46 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.156197 sky0=1381.156197 sky1=1381.156197 sky2=1381.156197 sky3=1381.156197 sky4=1381.156197 sky5=1381.156197 sky6=1381.156197 sky7=1381.156197 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-29 22:47:46 LOG2 dopset_gen: Result from 'sky2syn': 1631.156197 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-29 22:47:46 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631156197.0} 2008-Apr-29 22:47:46 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 22:47:46 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-29 22:47:46 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-29 22:47:46 INFO5 fixed_driftmap: Tracking J2000 position: RA = 12:08:03.1 Dec = +07:22:21.7 2008-Apr-29 22:47:46 LOG3 track_source: Calling 'track_source AGESVC1A_p2_066 120803.1 072221.7 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-29 22:47:46 START begin_task: Starting task 'sending tracking commands' 2008-Apr-29 22:47:46 LOG5 begin_task: Level: (3) ID = <10458> Status = 0 0 0 0 ok 2008-Apr-29 22:47:46 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_066} INFO {Slewing to source 'AGESVC1A_p2_066' ...} 2008-Apr-29 22:47:46 INFO1 track_source: Starting to track AGESVC1A_p2_066 2008-Apr-29 22:47:46 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_066" 2008-Apr-29 22:47:46 LOG3 vw_send: To DATATAKING: set ra 120803.1 2008-Apr-29 22:47:46 LOG3 vw_send: To DATATAKING: set dec 072221.7 2008-Apr-29 22:47:46 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-29 22:47:46 LOG3 vw_send: To DATATAKING: pnt tr 120803.1 072221.7 -CJ 2008-Apr-29 22:47:46 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-29 22:47:46 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-29 22:47:46 LOG5 finish_task: Level: (3) ID = <10458> Status = 0 0 0 0 ok 2008-Apr-29 22:47:46 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-29 22:47:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 22:47:46 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-29 22:47:46 LOG5 end_task: Level: (3) ID = <10458> Status = 0 0 0 0 ok 2008-Apr-29 22:47:46 START begin_task: Starting task 'waiting on telescope' 2008-Apr-29 22:47:46 LOG5 begin_task: Level: (3) ID = <10459> Status = 0 0 0 0 ok 2008-Apr-29 22:47:46 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-29 22:47:46 LOG3 waittrk: Start waittrk 5 2008-Apr-29 22:47:46 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-29 22:47:46 LOG5 begin_task: Level: (4) ID = <10460> Status = 0 0 0 0 ok 2008-Apr-29 22:47:46 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631156197.0} 2008-Apr-29 22:47:46 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 22:47:46 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_066" 2008-Apr-29 22:47:46 LOG4 got_cormsg: From DATATAKING: set ra 120803.1 2008-Apr-29 22:47:46 LOG4 got_cormsg: From DATATAKING: set dec 072221.7 2008-Apr-29 22:47:46 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 120803.1 2008-Apr-29 22:47:46 LOG4 got_cormsg: From DATATAKING: vw% 072221.7 2008-Apr-29 22:47:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 22:47:46 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-29 22:47:46 LOG4 got_cormsg: From DATATAKING: pnt tr 120803.1 072221.7 -CJ 2008-Apr-29 22:47:46 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-29 22:47:46 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-29 22:47:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 22:47:51 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-29 22:47:51 LOG5 end_task: Level: (4) ID = <10460> Status = 0 0 0 0 ok 2008-Apr-29 22:47:51 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-29 22:47:51 LOG5 begin_task: Level: (4) ID = <10461> Status = 0 0 0 0 ok 2008-Apr-29 22:47:53 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-29 22:47:53 LOG5 end_task: Level: (4) ID = <10461> Status = 0 0 0 0 ok 2008-Apr-29 22:47:53 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-29 22:47:53 INFO2 waittrk: Now tracking AGESVC1A_p2_066 2008-Apr-29 22:47:53 LOG4 waittrk: Current telescope position: Az = 406.71 ZA = 15.71 2008-Apr-29 22:47:53 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-29 22:47:53 LOG5 finish_task: Level: (3) ID = <10459> Status = 0 0 0 0 ok 2008-Apr-29 22:47:53 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-29 22:47:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 22:47:53 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-29 22:47:53 LOG5 end_task: Level: (3) ID = <10459> Status = 0 0 0 0 ok 2008-Apr-29 22:47:53 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-29 22:47:53 LOG5 begin_task: Level: (3) ID = <10462> Status = 0 0 0 0 ok 2008-Apr-29 22:47:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-29 22:47:53 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-29 22:47:53 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-29 22:47:53 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-29 22:47:53 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 22:47:53 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-29 22:47:53 LOG5 begin_task: Level: (4) ID = <10463> Status = 0 0 0 0 ok 2008-Apr-29 22:47:54 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-29 22:47:54 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 22:47:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 22:47:56 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-29 22:47:56 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-29 22:47:56 LOG5 end_task: Level: (4) ID = <10463> Status = 0 0 0 0 ok 2008-Apr-29 22:47:56 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-29 22:47:56 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-29 22:47:56 LOG5 begin_task: Level: (4) ID = <10464> Status = 0 0 0 0 ok 2008-Apr-29 22:47:56 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-29 22:47:56 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-29 22:47:56 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-29 22:47:56 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-29 22:47:56 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-29 22:47:57 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-29 22:47:57 LOG5 begin_task: Level: (5) ID = <10465> Status = 0 0 0 0 ok 2008-Apr-29 22:47:57 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-29 22:47:57 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 22:47:57 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 0 dB --- beam 1: 7 6 dB 2008-Apr-29 22:47:57 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 6 dB 2008-Apr-29 22:47:57 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-29 22:47:57 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 3 3 dB 2008-Apr-29 22:47:57 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-29 22:47:57 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-29 22:47:57 LOG5 end_task: Level: (5) ID = <10465> Status = 0 0 0 0 ok 2008-Apr-29 22:47:57 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.936 0.994 ALFA beam 1: 1.136 1.062 2008-Apr-29 22:47:57 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.027 0.955 ALFA beam 3: 1.013 1.079 2008-Apr-29 22:47:57 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.946 0.961 ALFA beam 5: 1.040 0.907 2008-Apr-29 22:47:57 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.074 1.069 ALFA beam 7: 0.937 0.949 2008-Apr-29 22:47:57 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-29 22:47:57 LOG5 finish_task: Level: (4) ID = <10464> Status = 0 0 0 0 ok 2008-Apr-29 22:47:57 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-29 22:47:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 22:47:57 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-29 22:47:57 LOG5 end_task: Level: (4) ID = <10464> Status = 0 0 0 0 ok 2008-Apr-29 22:47:57 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-29 22:47:57 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-29 22:47:57 LOG5 finish_task: Level: (3) ID = <10462> Status = 0 0 0 0 ok 2008-Apr-29 22:47:57 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-29 22:47:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 22:47:57 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-29 22:47:57 LOG5 end_task: Level: (3) ID = <10462> Status = 0 0 0 0 ok 2008-Apr-29 22:47:57 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Karen O'Neil 2008-Apr-29 22:47:57 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Karen O'Neil 2008-Apr-29 22:47:57 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Karen O'Neil 2008-Apr-29 22:47:57 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Karen O'Neil 2008-Apr-29 22:47:57 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-29 22:47:57 START begin_task: Starting task 'WAPP calibration' 2008-Apr-29 22:47:57 LOG5 begin_task: Level: (3) ID = <10466> Status = 0 0 0 0 ok 2008-Apr-29 22:47:57 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-29 22:47:57 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-29 22:47:57 START begin_task: Starting task 'selecting calibration type' 2008-Apr-29 22:47:57 LOG5 begin_task: Level: (4) ID = <10467> Status = 0 0 0 0 ok 2008-Apr-29 22:47:57 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-29 22:47:57 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-29 22:47:57 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 22:47:57 START begin_task: Starting task 'waiting on setcal' 2008-Apr-29 22:47:57 LOG5 begin_task: Level: (5) ID = <10468> Status = 0 0 0 0 ok 2008-Apr-29 22:47:57 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Karen O'Neil' 2008-Apr-29 22:47:58 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-29 22:47:58 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 22:47:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 22:47:58 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-29 22:47:58 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-29 22:47:58 LOG5 end_task: Level: (5) ID = <10468> Status = 0 0 0 0 ok 2008-Apr-29 22:47:58 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-29 22:47:58 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-29 22:47:58 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-29 22:47:58 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-29 22:47:58 LOG5 begin_task: Level: (5) ID = <10469> Status = 0 0 0 0 ok 2008-Apr-29 22:47:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 22:47:58 NOTE WAPPDATA-new_file: New FITS file: wapp.20080429.a2048.0011.fits 2008-Apr-29 22:47:58 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080429.a2048.0011.fits} 2008-Apr-29 22:47:59 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-29 22:47:59 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-29 22:47:59 LOG5 end_task: Level: (5) ID = <10469> Status = 0 0 0 0 ok 2008-Apr-29 22:47:59 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-29 22:47:59 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-29 22:47:59 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-29 22:47:59 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-29 22:47:59 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-29 22:47:59 LOG5 begin_task: Level: (5) ID = <10470> Status = 0 0 0 0 ok 2008-Apr-29 22:47:59 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-29 22:47:59 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-29 22:47:59 LOG5 end_task: Level: (5) ID = <10470> Status = 0 0 0 0 ok 2008-Apr-29 22:47:59 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-29 22:47:59 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-29 22:47:59 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-29 22:47:59 LOG5 finish_task: Level: (4) ID = <10467> Status = 0 0 0 0 ok 2008-Apr-29 22:47:59 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-29 22:47:59 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 22:47:59 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-29 22:47:59 LOG5 end_task: Level: (4) ID = <10467> Status = 0 0 0 0 ok 2008-Apr-29 22:47:59 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-29 22:47:59 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-29 22:47:59 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-29 22:47:59 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-29 22:47:59 LOG5 begin_task: Level: (4) ID = <10471> Status = 0 0 0 0 ok 2008-Apr-29 22:47:59 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-29 22:47:59 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-29 22:47:59 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-29 22:47:59 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-29 22:47:59 LOG5 end_task: Level: (4) ID = <10471> Status = 0 0 0 0 ok 2008-Apr-29 22:47:59 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-29 22:47:59 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-29 22:47:59 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-29 22:47:59 LOG5 begin_task: Level: (4) ID = <10472> Status = 0 0 0 0 ok 2008-Apr-29 22:47:59 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-29 22:47:59 LOG5 log_alfabeam: Parameters: 12.134194444444445 7.3726944444444431 12.910612 2008.3311429893274 -20.800095 2008-Apr-29 22:47:59 LOG4 log_alfabeam: ALFABEAM 0 12.134194444444447 7.372694444444453 2008-Apr-29 22:47:59 LOG4 log_alfabeam: ALFABEAM 1 12.133987625785064 7.470327216321880 2008-Apr-29 22:47:59 LOG4 log_alfabeam: ALFABEAM 2 12.128310549230312 7.405748878522999 2008-Apr-29 22:47:59 LOG4 log_alfabeam: ALFABEAM 3 12.128534759812636 7.307789680151358 2008-Apr-29 22:47:59 LOG4 log_alfabeam: ALFABEAM 4 12.134444179276185 7.274869527362780 2008-Apr-29 22:47:59 LOG4 log_alfabeam: ALFABEAM 5 12.140079500097771 7.340226244117015 2008-Apr-29 22:47:59 LOG4 log_alfabeam: ALFABEAM 6 12.139847261358740 7.437726077555485 2008-Apr-29 22:47:59 INFO2 take_spectra: Starting WAPP scan: 812000142 2008-Apr-29 22:47:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-29 22:47:59 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-29 22:47:59 LOG5 begin_task: Level: (5) ID = <10473> Status = 0 0 0 0 ok 2008-Apr-29 22:47:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-29 22:47:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10080.00 2008-Apr-29 22:48:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.156197 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-29 22:48:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.156197 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 22:48:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.156197 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 22:48:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.156197 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 22:48:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.156197 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 22:48:05 LOG3 WAPP=1+2+4-save_rfcalc: Channel 5: Sky freq = 1381.156197 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 22:48:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.156197 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 22:48:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.156197 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 22:48:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.156197 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 22:48:05 LOG3 WAPP=3-save_rfcalc: Channel 5: Sky freq = 1381.156197 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 22:48:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-29 22:48:05 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-29 22:48:05 LOG5 end_task: Level: (5) ID = <10473> Status = 0 0 0 0 ok 2008-Apr-29 22:48:05 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-29 22:48:05 LOG5 end_task: Level: (4) ID = <10472> Status = 0 0 0 0 ok 2008-Apr-29 22:48:05 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-29 22:48:05 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-29 22:48:05 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-29 22:48:05 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-29 22:48:05 LOG5 begin_task: Level: (4) ID = <10474> Status = 0 0 0 0 ok 2008-Apr-29 22:48:06 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-29 22:48:06 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-29 22:48:06 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-29 22:48:06 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-29 22:48:06 LOG5 end_task: Level: (4) ID = <10474> Status = 0 0 0 0 ok 2008-Apr-29 22:48:06 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-29 22:48:06 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-29 22:48:06 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-29 22:48:06 LOG5 begin_task: Level: (4) ID = <10475> Status = 0 0 0 0 ok 2008-Apr-29 22:48:06 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-29 22:48:06 LOG5 log_alfabeam: Parameters: 12.134194444444445 7.3726944444444431 12.912561 2008.3311432111441 -20.800095 2008-Apr-29 22:48:06 LOG4 log_alfabeam: ALFABEAM 0 12.134194444444445 7.372694444444432 2008-Apr-29 22:48:06 LOG4 log_alfabeam: ALFABEAM 1 12.133995577831367 7.470331017083397 2008-Apr-29 22:48:06 LOG4 log_alfabeam: ALFABEAM 2 12.128313252986290 7.405854859429593 2008-Apr-29 22:48:06 LOG4 log_alfabeam: ALFABEAM 3 12.128529465417115 7.307891990831735 2008-Apr-29 22:48:06 LOG4 log_alfabeam: ALFABEAM 4 12.134436156712461 7.274865212089885 2008-Apr-29 22:48:06 LOG4 log_alfabeam: ALFABEAM 5 12.140076840414764 7.340119423503660 2008-Apr-29 22:48:06 LOG4 log_alfabeam: ALFABEAM 6 12.139852577922374 7.437623697074414 2008-Apr-29 22:48:06 INFO2 take_spectra: Starting WAPP scan: 812000143 2008-Apr-29 22:48:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-29 22:48:06 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-29 22:48:06 LOG5 begin_task: Level: (5) ID = <10476> Status = 0 0 0 0 ok 2008-Apr-29 22:48:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-29 22:48:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.530 > 1.4)! 2008-Apr-29 22:48:06 LOG4 check_wapp_levels: WAPP-1 power levels: 1.275 1.255 1.530 1.434 2008-Apr-29 22:48:06 LOG4 check_wapp_levels: WAPP-2 power levels: 1.386 1.306 1.374 1.455 2008-Apr-29 22:48:06 LOG4 check_wapp_levels: WAPP-3 power levels: 1.301 1.323 1.430 1.207 2008-Apr-29 22:48:06 LOG4 check_wapp_levels: WAPP-4 power levels: 1.473 1.467 1.284 1.303 2008-Apr-29 22:48:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10087.00 2008-Apr-29 22:48:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.156197 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-29 22:48:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.156197 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 22:48:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.156197 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 22:48:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.156197 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 22:48:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.156197 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 22:48:12 INFO5 check_wapp_levels: WAPP power levels are between 1.207 and 1.530 (still bad) 2008-Apr-29 22:48:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.156197 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 22:48:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.156197 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 22:48:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.156197 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 22:48:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.156197 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 22:48:12 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-29 22:48:12 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-29 22:48:12 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-29 22:48:12 LOG5 end_task: Level: (5) ID = <10476> Status = 0 0 0 0 ok 2008-Apr-29 22:48:12 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-29 22:48:12 LOG5 end_task: Level: (4) ID = <10475> Status = 0 0 0 0 ok 2008-Apr-29 22:48:12 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-29 22:48:12 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-29 22:48:12 LOG5 finish_task: Level: (3) ID = <10466> Status = 0 0 0 0 ok 2008-Apr-29 22:48:12 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-29 22:48:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 22:48:12 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-29 22:48:12 LOG5 end_task: Level: (3) ID = <10466> Status = 0 0 0 0 ok 2008-Apr-29 22:48:13 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-29 22:48:13 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 46.90 and ZA = 15.71 2008-Apr-29 22:48:13 LOG3 track_source: Calling 'track_source AGESVC1A_p2_066 46.90 15.7102310375 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-29 22:48:13 START begin_task: Starting task 'sending tracking commands' 2008-Apr-29 22:48:13 LOG5 begin_task: Level: (3) ID = <10477> Status = 0 0 0 0 ok 2008-Apr-29 22:48:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_066} INFO {Slewing to source 'AGESVC1A_p2_066' ...} 2008-Apr-29 22:48:13 INFO1 track_source: Starting to track AGESVC1A_p2_066 2008-Apr-29 22:48:13 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_066" 2008-Apr-29 22:48:13 LOG3 vw_send: To DATATAKING: set ra 46.90 2008-Apr-29 22:48:13 LOG3 vw_send: To DATATAKING: set dec 15.7102310375 2008-Apr-29 22:48:13 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-29 22:48:13 LOG3 vw_send: To DATATAKING: pnt tr 46.90 15.7102310375 -CF 2008-Apr-29 22:48:13 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-29 22:48:13 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-29 22:48:13 LOG5 finish_task: Level: (3) ID = <10477> Status = 0 0 0 0 ok 2008-Apr-29 22:48:13 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-29 22:48:13 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 22:48:13 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-29 22:48:13 LOG5 end_task: Level: (3) ID = <10477> Status = 0 0 0 0 ok 2008-Apr-29 22:48:13 LOG1 fixed_driftmap: Parameters: HA = +00:45:59.5 Start = 12:55:26.7 LST = 12:54:52.2 diff = 34.5 secs 2008-Apr-29 22:48:13 INFO2 fixed_driftmap: Waiting 32.5 seconds for RA 12:09:27 2008-Apr-29 22:48:13 INFO2 lstwait: Waiting for 32.4 secs from LST 12:54:52 to LST 12:55:25 ... 2008-Apr-29 22:48:13 LOG4 send_obs_status: To obs_status: <1> TASKTIME 32.362184607791527 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-29 22:48:13 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-29 22:48:13 LOG5 begin_task: Level: (3) ID = <10478> Status = 0 0 0 0 ok 2008-Apr-29 22:48:13 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_066" 2008-Apr-29 22:48:13 LOG4 got_cormsg: From DATATAKING: set ra 46.90 2008-Apr-29 22:48:13 LOG4 got_cormsg: From DATATAKING: set dec 15.7102310375 2008-Apr-29 22:48:13 LOG4 got_cormsg: From DATATAKING: vw% 46.90 2008-Apr-29 22:48:13 LOG4 got_cormsg: From DATATAKING: vw% 15.7102310375 2008-Apr-29 22:48:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 22:48:13 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-29 22:48:13 LOG4 got_cormsg: From DATATAKING: pnt tr 46.90 15.7102310375 -CF 2008-Apr-29 22:48:13 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-29 22:48:13 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-29 22:48:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 22:48:18 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.908 and 1.142 2008-Apr-29 22:48:45 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-29 22:48:45 LOG5 end_task: Level: (3) ID = <10478> Status = 0 0 0 0 ok 2008-Apr-29 22:48:45 LOG4 lstwait: Finished waiting, the gui caused difference: 0.64041175999989264 2008-Apr-29 22:48:45 INFO3 lstwait: Finished waiting 2008-Apr-29 22:48:45 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-29 22:48:45 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-29 22:48:45 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-29 22:48:45 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-29 22:48:45 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-29 22:48:45 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-29 22:48:45 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-29 22:48:45 LOG5 begin_task: Level: (3) ID = <10479> Status = 0 0 0 0 ok 2008-Apr-29 22:48:45 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-29 22:48:45 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-29 22:48:45 INFO2 take_spectra: Starting WAPP scan: 812000144 2008-Apr-29 22:48:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-29 22:48:46 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-29 22:48:46 LOG5 begin_task: Level: (4) ID = <10480> Status = 0 0 0 0 ok 2008-Apr-29 22:48:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-29 22:48:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10127.00 2008-Apr-29 22:48:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.156197 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-29 22:48:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.156197 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 22:48:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.156197 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 22:48:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.156197 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 22:48:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.156197 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 22:48:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.156197 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 22:48:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.156197 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 22:48:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.156197 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 22:48:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.156197 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 22:51:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.767 < 0.8)! 2008-Apr-29 22:51:12 LOG4 check_wapp_levels: WAPP-1 power levels: 0.946 0.767 1.151 1.061 2008-Apr-29 22:51:12 LOG4 check_wapp_levels: WAPP-2 power levels: 1.027 0.958 1.013 1.078 2008-Apr-29 22:51:12 LOG4 check_wapp_levels: WAPP-3 power levels: 0.952 0.970 1.047 0.909 2008-Apr-29 22:51:12 LOG4 check_wapp_levels: WAPP-4 power levels: 1.078 1.066 0.938 0.949 2008-Apr-29 22:51:14 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.836 and 1.159 2008-Apr-29 22:51:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.719 < 0.8)! 2008-Apr-29 22:51:34 LOG4 check_wapp_levels: WAPP-1 power levels: 0.979 0.719 1.189 1.081 2008-Apr-29 22:51:34 LOG4 check_wapp_levels: WAPP-2 power levels: 1.030 0.962 1.014 1.079 2008-Apr-29 22:51:34 LOG4 check_wapp_levels: WAPP-3 power levels: 0.968 0.973 1.058 0.910 2008-Apr-29 22:51:34 LOG4 check_wapp_levels: WAPP-4 power levels: 1.079 1.067 0.939 0.949 2008-Apr-29 22:51:36 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.910 and 1.190 2008-Apr-29 22:51:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.628 < 0.8)! 2008-Apr-29 22:51:48 LOG4 check_wapp_levels: WAPP-1 power levels: 0.987 0.628 1.189 1.081 2008-Apr-29 22:51:48 LOG4 check_wapp_levels: WAPP-2 power levels: 1.030 0.964 1.012 1.078 2008-Apr-29 22:51:48 LOG4 check_wapp_levels: WAPP-3 power levels: 0.967 0.971 1.057 0.910 2008-Apr-29 22:51:48 LOG4 check_wapp_levels: WAPP-4 power levels: 1.081 1.068 0.939 0.951 2008-Apr-29 22:51:50 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.912 and 1.190 2008-Apr-29 22:52:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.667 < 0.8)! 2008-Apr-29 22:52:05 LOG4 check_wapp_levels: WAPP-1 power levels: 0.978 0.667 1.186 1.081 2008-Apr-29 22:52:05 LOG4 check_wapp_levels: WAPP-2 power levels: 1.031 0.961 1.014 1.081 2008-Apr-29 22:52:05 LOG4 check_wapp_levels: WAPP-3 power levels: 0.957 0.970 1.052 0.909 2008-Apr-29 22:52:05 LOG4 check_wapp_levels: WAPP-4 power levels: 1.079 1.068 0.940 0.951 2008-Apr-29 22:52:07 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.908 and 1.187 2008-Apr-29 22:52:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.635 < 0.8)! 2008-Apr-29 22:52:23 LOG4 check_wapp_levels: WAPP-1 power levels: 0.974 0.635 1.184 1.082 2008-Apr-29 22:52:23 LOG4 check_wapp_levels: WAPP-2 power levels: 1.032 0.960 1.014 1.079 2008-Apr-29 22:52:23 LOG4 check_wapp_levels: WAPP-3 power levels: 0.957 0.969 1.053 0.909 2008-Apr-29 22:52:23 LOG4 check_wapp_levels: WAPP-4 power levels: 1.080 1.068 0.940 0.950 2008-Apr-29 22:52:25 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.855 and 1.182 2008-Apr-29 22:52:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.794 < 0.8)! 2008-Apr-29 22:52:33 LOG4 check_wapp_levels: WAPP-1 power levels: 0.965 0.794 1.181 1.080 2008-Apr-29 22:52:33 LOG4 check_wapp_levels: WAPP-2 power levels: 1.032 0.961 1.014 1.080 2008-Apr-29 22:52:33 LOG4 check_wapp_levels: WAPP-3 power levels: 0.953 0.968 1.054 0.909 2008-Apr-29 22:52:33 LOG4 check_wapp_levels: WAPP-4 power levels: 1.080 1.069 0.939 0.951 2008-Apr-29 22:52:35 INFO5 check_wapp_levels: WAPP power levels are between 0.769 and 1.183 (still bad) 2008-Apr-29 22:52:37 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.910 and 1.181 2008-Apr-29 22:52:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.720 < 0.8)! 2008-Apr-29 22:52:53 LOG4 check_wapp_levels: WAPP-1 power levels: 0.963 0.720 1.183 1.085 2008-Apr-29 22:52:53 LOG4 check_wapp_levels: WAPP-2 power levels: 1.031 0.960 1.013 1.080 2008-Apr-29 22:52:53 LOG4 check_wapp_levels: WAPP-3 power levels: 0.950 0.967 1.052 0.909 2008-Apr-29 22:52:53 LOG4 check_wapp_levels: WAPP-4 power levels: 1.083 1.072 0.943 0.953 2008-Apr-29 22:52:55 INFO5 check_wapp_levels: WAPP power levels are between 0.689 and 1.186 (still bad) 2008-Apr-29 22:52:57 INFO5 check_wapp_levels: WAPP power levels are between 0.730 and 1.185 (still bad) 2008-Apr-29 22:52:59 INFO5 check_wapp_levels: WAPP power levels are between 0.732 and 1.184 (still bad) 2008-Apr-29 22:53:01 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.910 and 1.181 2008-Apr-29 22:53:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.661 < 0.8)! 2008-Apr-29 22:53:11 LOG4 check_wapp_levels: WAPP-1 power levels: 0.964 0.661 1.179 1.083 2008-Apr-29 22:53:11 LOG4 check_wapp_levels: WAPP-2 power levels: 1.032 0.960 1.012 1.079 2008-Apr-29 22:53:11 LOG4 check_wapp_levels: WAPP-3 power levels: 0.952 0.966 1.049 0.910 2008-Apr-29 22:53:11 LOG4 check_wapp_levels: WAPP-4 power levels: 1.082 1.072 0.942 0.953 2008-Apr-29 22:53:13 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.909 and 1.181 2008-Apr-29 22:53:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.794 < 0.8)! 2008-Apr-29 22:53:15 LOG4 check_wapp_levels: WAPP-1 power levels: 0.963 0.794 1.180 1.083 2008-Apr-29 22:53:15 LOG4 check_wapp_levels: WAPP-2 power levels: 1.032 0.959 1.013 1.078 2008-Apr-29 22:53:15 LOG4 check_wapp_levels: WAPP-3 power levels: 0.952 0.967 1.050 0.909 2008-Apr-29 22:53:15 LOG4 check_wapp_levels: WAPP-4 power levels: 1.081 1.072 0.942 0.953 2008-Apr-29 22:53:17 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.859 and 1.180 2008-Apr-29 22:53:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.689 < 0.8)! 2008-Apr-29 22:53:19 LOG4 check_wapp_levels: WAPP-1 power levels: 0.960 0.689 1.182 1.084 2008-Apr-29 22:53:19 LOG4 check_wapp_levels: WAPP-2 power levels: 1.030 0.960 1.013 1.079 2008-Apr-29 22:53:19 LOG4 check_wapp_levels: WAPP-3 power levels: 0.953 0.967 1.050 0.907 2008-Apr-29 22:53:19 LOG4 check_wapp_levels: WAPP-4 power levels: 1.079 1.071 0.940 0.951 2008-Apr-29 22:53:21 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.908 and 1.179 2008-Apr-29 22:53:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.678 < 0.8)! 2008-Apr-29 22:53:26 LOG4 check_wapp_levels: WAPP-1 power levels: 0.961 0.678 1.179 1.085 2008-Apr-29 22:53:26 LOG4 check_wapp_levels: WAPP-2 power levels: 1.033 0.961 1.013 1.078 2008-Apr-29 22:53:26 LOG4 check_wapp_levels: WAPP-3 power levels: 0.951 0.967 1.051 0.908 2008-Apr-29 22:53:26 LOG4 check_wapp_levels: WAPP-4 power levels: 1.076 1.068 0.938 0.949 2008-Apr-29 22:53:28 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.909 and 1.180 2008-Apr-29 22:53:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.573 < 0.8)! 2008-Apr-29 22:53:30 LOG4 check_wapp_levels: WAPP-1 power levels: 0.957 0.573 1.179 1.085 2008-Apr-29 22:53:30 LOG4 check_wapp_levels: WAPP-2 power levels: 1.030 0.963 1.014 1.078 2008-Apr-29 22:53:30 LOG4 check_wapp_levels: WAPP-3 power levels: 0.951 0.966 1.050 0.909 2008-Apr-29 22:53:30 LOG4 check_wapp_levels: WAPP-4 power levels: 1.077 1.068 0.938 0.948 2008-Apr-29 22:53:32 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.910 and 1.181 2008-Apr-29 22:53:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.797 < 0.8)! 2008-Apr-29 22:53:56 LOG4 check_wapp_levels: WAPP-1 power levels: 0.953 0.797 1.170 1.081 2008-Apr-29 22:53:56 LOG4 check_wapp_levels: WAPP-2 power levels: 1.033 0.961 1.014 1.080 2008-Apr-29 22:53:56 LOG4 check_wapp_levels: WAPP-3 power levels: 0.950 0.966 1.048 0.908 2008-Apr-29 22:53:56 LOG4 check_wapp_levels: WAPP-4 power levels: 1.076 1.067 0.938 0.948 2008-Apr-29 22:53:58 INFO5 check_wapp_levels: WAPP power levels are between 0.646 and 1.168 (still bad) 2008-Apr-29 22:54:00 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.843 and 1.170 2008-Apr-29 22:54:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.694 < 0.8)! 2008-Apr-29 22:54:08 LOG4 check_wapp_levels: WAPP-1 power levels: 0.953 0.694 1.173 1.080 2008-Apr-29 22:54:08 LOG4 check_wapp_levels: WAPP-2 power levels: 1.030 0.960 1.016 1.079 2008-Apr-29 22:54:08 LOG4 check_wapp_levels: WAPP-3 power levels: 0.951 0.966 1.050 0.908 2008-Apr-29 22:54:08 LOG4 check_wapp_levels: WAPP-4 power levels: 1.077 1.068 0.939 0.948 2008-Apr-29 22:54:10 INFO5 check_wapp_levels: WAPP power levels are between 0.797 and 1.171 (still bad) 2008-Apr-29 22:54:12 INFO5 check_wapp_levels: WAPP power levels are between 0.797 and 1.168 (still bad) 2008-Apr-29 22:54:14 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.908 and 1.171 2008-Apr-29 22:54:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.742 < 0.8)! 2008-Apr-29 22:54:22 LOG4 check_wapp_levels: WAPP-1 power levels: 0.956 0.742 1.173 1.079 2008-Apr-29 22:54:22 LOG4 check_wapp_levels: WAPP-2 power levels: 1.030 0.960 1.015 1.079 2008-Apr-29 22:54:22 LOG4 check_wapp_levels: WAPP-3 power levels: 0.957 0.973 1.051 0.909 2008-Apr-29 22:54:22 LOG4 check_wapp_levels: WAPP-4 power levels: 1.081 1.071 0.941 0.952 2008-Apr-29 22:54:24 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.909 and 1.174 2008-Apr-29 22:54:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.570 < 0.8)! 2008-Apr-29 22:54:28 LOG4 check_wapp_levels: WAPP-1 power levels: 0.952 0.570 1.171 1.079 2008-Apr-29 22:54:28 LOG4 check_wapp_levels: WAPP-2 power levels: 1.031 0.959 1.015 1.079 2008-Apr-29 22:54:28 LOG4 check_wapp_levels: WAPP-3 power levels: 0.963 0.978 1.052 0.909 2008-Apr-29 22:54:28 LOG4 check_wapp_levels: WAPP-4 power levels: 1.080 1.068 0.941 0.950 2008-Apr-29 22:54:30 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.909 and 1.175 2008-Apr-29 22:54:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.683 < 0.8)! 2008-Apr-29 22:54:40 LOG4 check_wapp_levels: WAPP-1 power levels: 0.954 0.683 1.173 1.078 2008-Apr-29 22:54:40 LOG4 check_wapp_levels: WAPP-2 power levels: 1.028 0.960 1.014 1.079 2008-Apr-29 22:54:40 LOG4 check_wapp_levels: WAPP-3 power levels: 0.963 0.978 1.051 0.910 2008-Apr-29 22:54:40 LOG4 check_wapp_levels: WAPP-4 power levels: 1.081 1.067 0.941 0.949 2008-Apr-29 22:54:42 INFO5 check_wapp_levels: WAPP power levels are between 0.792 and 1.173 (still bad) 2008-Apr-29 22:54:44 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.910 and 1.173 2008-Apr-29 22:54:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.784 < 0.8)! 2008-Apr-29 22:54:57 LOG4 check_wapp_levels: WAPP-1 power levels: 0.954 0.784 1.174 1.082 2008-Apr-29 22:54:57 LOG4 check_wapp_levels: WAPP-2 power levels: 1.029 0.961 1.017 1.081 2008-Apr-29 22:54:57 LOG4 check_wapp_levels: WAPP-3 power levels: 0.956 0.969 1.050 0.909 2008-Apr-29 22:54:57 LOG4 check_wapp_levels: WAPP-4 power levels: 1.079 1.068 0.940 0.950 2008-Apr-29 22:54:59 INFO5 check_wapp_levels: WAPP power levels are between 0.643 and 1.173 (still bad) 2008-Apr-29 22:55:01 INFO5 check_wapp_levels: WAPP power levels are between 0.709 and 1.174 (still bad) 2008-Apr-29 22:55:03 INFO5 check_wapp_levels: WAPP power levels are between 0.718 and 1.174 (still bad) 2008-Apr-29 22:55:05 INFO5 check_wapp_levels: WAPP power levels are between 0.574 and 1.175 (still bad) 2008-Apr-29 22:55:07 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.908 and 1.175 2008-Apr-29 22:55:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.775 < 0.8)! 2008-Apr-29 22:55:13 LOG4 check_wapp_levels: WAPP-1 power levels: 0.951 0.775 1.174 1.083 2008-Apr-29 22:55:13 LOG4 check_wapp_levels: WAPP-2 power levels: 1.030 0.961 1.017 1.083 2008-Apr-29 22:55:13 LOG4 check_wapp_levels: WAPP-3 power levels: 0.952 0.969 1.049 0.909 2008-Apr-29 22:55:13 LOG4 check_wapp_levels: WAPP-4 power levels: 1.079 1.068 0.939 0.948 2008-Apr-29 22:55:15 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.910 and 1.173 2008-Apr-29 22:55:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.610 < 0.8)! 2008-Apr-29 22:55:21 LOG4 check_wapp_levels: WAPP-1 power levels: 0.948 0.610 1.170 1.080 2008-Apr-29 22:55:21 LOG4 check_wapp_levels: WAPP-2 power levels: 1.030 0.961 1.020 1.085 2008-Apr-29 22:55:21 LOG4 check_wapp_levels: WAPP-3 power levels: 0.954 0.968 1.051 0.910 2008-Apr-29 22:55:21 LOG4 check_wapp_levels: WAPP-4 power levels: 1.079 1.066 0.939 0.948 2008-Apr-29 22:55:23 INFO5 check_wapp_levels: WAPP power levels are between 0.757 and 1.170 (still bad) 2008-Apr-29 22:55:25 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.878 and 1.167 2008-Apr-29 22:55:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.771 < 0.8)! 2008-Apr-29 22:55:31 LOG4 check_wapp_levels: WAPP-1 power levels: 0.951 0.771 1.169 1.077 2008-Apr-29 22:55:31 LOG4 check_wapp_levels: WAPP-2 power levels: 1.030 0.962 1.017 1.082 2008-Apr-29 22:55:31 LOG4 check_wapp_levels: WAPP-3 power levels: 0.955 0.970 1.048 0.910 2008-Apr-29 22:55:31 LOG4 check_wapp_levels: WAPP-4 power levels: 1.080 1.067 0.939 0.948 2008-Apr-29 22:55:33 INFO5 check_wapp_levels: WAPP power levels are between 0.741 and 1.168 (still bad) 2008-Apr-29 22:55:35 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.859 and 1.165 2008-Apr-29 22:55:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.715 < 0.8)! 2008-Apr-29 22:55:49 LOG4 check_wapp_levels: WAPP-1 power levels: 0.952 0.715 1.168 1.079 2008-Apr-29 22:55:49 LOG4 check_wapp_levels: WAPP-2 power levels: 1.031 0.963 1.016 1.081 2008-Apr-29 22:55:49 LOG4 check_wapp_levels: WAPP-3 power levels: 0.955 0.968 1.048 0.912 2008-Apr-29 22:55:49 LOG4 check_wapp_levels: WAPP-4 power levels: 1.082 1.068 0.941 0.950 2008-Apr-29 22:55:51 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.906 and 1.170 2008-Apr-29 22:55:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.790 < 0.8)! 2008-Apr-29 22:55:53 LOG4 check_wapp_levels: WAPP-1 power levels: 0.949 0.790 1.168 1.078 2008-Apr-29 22:55:53 LOG4 check_wapp_levels: WAPP-2 power levels: 1.029 0.963 1.015 1.081 2008-Apr-29 22:55:53 LOG4 check_wapp_levels: WAPP-3 power levels: 0.956 0.971 1.049 0.911 2008-Apr-29 22:55:53 LOG4 check_wapp_levels: WAPP-4 power levels: 1.082 1.068 0.943 0.950 2008-Apr-29 22:55:55 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.910 and 1.170 2008-Apr-29 22:56:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.751 < 0.8)! 2008-Apr-29 22:56:07 LOG4 check_wapp_levels: WAPP-1 power levels: 0.950 0.751 1.168 1.077 2008-Apr-29 22:56:07 LOG4 check_wapp_levels: WAPP-2 power levels: 1.030 0.963 1.017 1.081 2008-Apr-29 22:56:07 LOG4 check_wapp_levels: WAPP-3 power levels: 0.956 0.972 1.049 0.912 2008-Apr-29 22:56:07 LOG4 check_wapp_levels: WAPP-4 power levels: 1.084 1.069 0.943 0.950 2008-Apr-29 22:56:09 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.911 and 1.169 2008-Apr-29 22:56:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.603 < 0.8)! 2008-Apr-29 22:56:20 LOG4 check_wapp_levels: WAPP-1 power levels: 0.952 0.603 1.171 1.079 2008-Apr-29 22:56:20 LOG4 check_wapp_levels: WAPP-2 power levels: 1.031 0.962 1.017 1.082 2008-Apr-29 22:56:20 LOG4 check_wapp_levels: WAPP-3 power levels: 0.958 0.974 1.052 0.912 2008-Apr-29 22:56:20 LOG4 check_wapp_levels: WAPP-4 power levels: 1.083 1.070 0.942 0.951 2008-Apr-29 22:56:22 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.911 and 1.171 2008-Apr-29 22:56:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.710 < 0.8)! 2008-Apr-29 22:56:32 LOG4 check_wapp_levels: WAPP-1 power levels: 0.946 0.710 1.168 1.080 2008-Apr-29 22:56:32 LOG4 check_wapp_levels: WAPP-2 power levels: 1.029 0.962 1.015 1.082 2008-Apr-29 22:56:32 LOG4 check_wapp_levels: WAPP-3 power levels: 0.957 0.973 1.051 0.911 2008-Apr-29 22:56:32 LOG4 check_wapp_levels: WAPP-4 power levels: 1.083 1.066 0.942 0.949 2008-Apr-29 22:56:34 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.912 and 1.169 2008-Apr-29 22:56:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.560 < 0.8)! 2008-Apr-29 22:56:48 LOG4 check_wapp_levels: WAPP-1 power levels: 0.947 0.560 1.159 1.080 2008-Apr-29 22:56:48 LOG4 check_wapp_levels: WAPP-2 power levels: 1.031 0.963 1.016 1.081 2008-Apr-29 22:56:48 LOG4 check_wapp_levels: WAPP-3 power levels: 0.956 0.974 1.048 0.912 2008-Apr-29 22:56:48 LOG4 check_wapp_levels: WAPP-4 power levels: 1.084 1.067 0.943 0.949 2008-Apr-29 22:56:50 INFO5 check_wapp_levels: WAPP power levels are between 0.565 and 1.159 (still bad) 2008-Apr-29 22:56:52 INFO5 check_wapp_levels: WAPP power levels are between 0.568 and 1.157 (still bad) 2008-Apr-29 22:56:54 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.912 and 1.162 2008-Apr-29 22:56:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.791 < 0.8)! 2008-Apr-29 22:56:56 LOG4 check_wapp_levels: WAPP-1 power levels: 0.952 0.791 1.169 1.080 2008-Apr-29 22:56:56 LOG4 check_wapp_levels: WAPP-2 power levels: 1.033 0.962 1.017 1.081 2008-Apr-29 22:56:56 LOG4 check_wapp_levels: WAPP-3 power levels: 0.960 0.974 1.052 0.912 2008-Apr-29 22:56:56 LOG4 check_wapp_levels: WAPP-4 power levels: 1.084 1.069 0.942 0.951 2008-Apr-29 22:56:58 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.912 and 1.171 2008-Apr-29 22:57:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.626 < 0.8)! 2008-Apr-29 22:57:12 LOG4 check_wapp_levels: WAPP-1 power levels: 0.952 0.626 1.174 1.082 2008-Apr-29 22:57:12 LOG4 check_wapp_levels: WAPP-2 power levels: 1.034 0.964 1.017 1.082 2008-Apr-29 22:57:12 LOG4 check_wapp_levels: WAPP-3 power levels: 0.960 0.974 1.050 0.914 2008-Apr-29 22:57:12 LOG4 check_wapp_levels: WAPP-4 power levels: 1.083 1.066 0.942 0.949 2008-Apr-29 22:57:14 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.913 and 1.176 2008-Apr-29 22:57:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.786 < 0.8)! 2008-Apr-29 22:57:16 LOG4 check_wapp_levels: WAPP-1 power levels: 0.948 0.786 1.175 1.084 2008-Apr-29 22:57:16 LOG4 check_wapp_levels: WAPP-2 power levels: 1.033 0.963 1.016 1.083 2008-Apr-29 22:57:16 LOG4 check_wapp_levels: WAPP-3 power levels: 0.961 0.973 1.051 0.913 2008-Apr-29 22:57:16 LOG4 check_wapp_levels: WAPP-4 power levels: 1.083 1.067 0.941 0.949 2008-Apr-29 22:57:18 INFO5 check_wapp_levels: WAPP power levels are between 0.763 and 1.173 (still bad) 2008-Apr-29 22:57:20 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.913 and 1.174 2008-Apr-29 22:57:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.799 < 0.8)! 2008-Apr-29 22:57:37 LOG4 check_wapp_levels: WAPP-1 power levels: 0.948 0.799 1.170 1.082 2008-Apr-29 22:57:37 LOG4 check_wapp_levels: WAPP-2 power levels: 1.033 0.964 1.017 1.082 2008-Apr-29 22:57:37 LOG4 check_wapp_levels: WAPP-3 power levels: 0.962 0.977 1.050 0.913 2008-Apr-29 22:57:37 LOG4 check_wapp_levels: WAPP-4 power levels: 1.083 1.067 0.942 0.950 2008-Apr-29 22:57:39 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.830 and 1.170 2008-Apr-29 22:57:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.745 < 0.8)! 2008-Apr-29 22:57:43 LOG4 check_wapp_levels: WAPP-1 power levels: 0.949 0.745 1.170 1.082 2008-Apr-29 22:57:43 LOG4 check_wapp_levels: WAPP-2 power levels: 1.032 0.965 1.015 1.082 2008-Apr-29 22:57:43 LOG4 check_wapp_levels: WAPP-3 power levels: 0.963 0.978 1.051 0.913 2008-Apr-29 22:57:43 LOG4 check_wapp_levels: WAPP-4 power levels: 1.084 1.068 0.942 0.951 2008-Apr-29 22:57:45 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.912 and 1.171 2008-Apr-29 22:57:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.634 < 0.8)! 2008-Apr-29 22:57:55 LOG4 check_wapp_levels: WAPP-1 power levels: 0.950 0.634 1.170 1.083 2008-Apr-29 22:57:55 LOG4 check_wapp_levels: WAPP-2 power levels: 1.031 0.963 1.017 1.082 2008-Apr-29 22:57:55 LOG4 check_wapp_levels: WAPP-3 power levels: 0.960 0.977 1.051 0.913 2008-Apr-29 22:57:55 LOG4 check_wapp_levels: WAPP-4 power levels: 1.082 1.069 0.941 0.952 2008-Apr-29 22:57:57 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.816 and 1.167 2008-Apr-29 22:58:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.762 < 0.8)! 2008-Apr-29 22:58:09 LOG4 check_wapp_levels: WAPP-1 power levels: 0.947 0.762 1.168 1.081 2008-Apr-29 22:58:09 LOG4 check_wapp_levels: WAPP-2 power levels: 1.033 0.962 1.018 1.083 2008-Apr-29 22:58:09 LOG4 check_wapp_levels: WAPP-3 power levels: 0.959 0.976 1.052 0.912 2008-Apr-29 22:58:09 LOG4 check_wapp_levels: WAPP-4 power levels: 1.082 1.067 0.942 0.951 2008-Apr-29 22:58:11 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.884 and 1.166 2008-Apr-29 22:58:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.724 < 0.8)! 2008-Apr-29 22:58:13 LOG4 check_wapp_levels: WAPP-1 power levels: 0.950 0.724 1.165 1.079 2008-Apr-29 22:58:13 LOG4 check_wapp_levels: WAPP-2 power levels: 1.032 0.963 1.018 1.083 2008-Apr-29 22:58:13 LOG4 check_wapp_levels: WAPP-3 power levels: 0.957 0.974 1.051 0.912 2008-Apr-29 22:58:13 LOG4 check_wapp_levels: WAPP-4 power levels: 1.084 1.069 0.942 0.951 2008-Apr-29 22:58:15 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.881 and 1.163 2008-Apr-29 22:58:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.788 < 0.8)! 2008-Apr-29 22:58:27 LOG4 check_wapp_levels: WAPP-1 power levels: 0.946 0.788 1.169 1.079 2008-Apr-29 22:58:27 LOG4 check_wapp_levels: WAPP-2 power levels: 1.028 0.962 1.015 1.080 2008-Apr-29 22:58:27 LOG4 check_wapp_levels: WAPP-3 power levels: 0.958 0.973 1.050 0.912 2008-Apr-29 22:58:27 LOG4 check_wapp_levels: WAPP-4 power levels: 1.082 1.068 0.941 0.951 2008-Apr-29 22:58:29 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.911 and 1.169 2008-Apr-29 22:58:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.750 < 0.8)! 2008-Apr-29 22:58:31 LOG4 check_wapp_levels: WAPP-1 power levels: 0.949 0.750 1.171 1.080 2008-Apr-29 22:58:31 LOG4 check_wapp_levels: WAPP-2 power levels: 1.031 0.962 1.015 1.081 2008-Apr-29 22:58:31 LOG4 check_wapp_levels: WAPP-3 power levels: 0.960 0.972 1.051 0.912 2008-Apr-29 22:58:31 LOG4 check_wapp_levels: WAPP-4 power levels: 1.083 1.069 0.941 0.951 2008-Apr-29 22:58:33 INFO5 check_wapp_levels: WAPP power levels are between 0.769 and 1.170 (still bad) 2008-Apr-29 22:58:35 INFO5 check_wapp_levels: WAPP power levels are between 0.703 and 1.167 (still bad) 2008-Apr-29 22:58:37 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.912 and 1.169 2008-Apr-29 22:58:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.638 < 0.8)! 2008-Apr-29 22:58:41 LOG4 check_wapp_levels: WAPP-1 power levels: 0.947 0.638 1.164 1.079 2008-Apr-29 22:58:41 LOG4 check_wapp_levels: WAPP-2 power levels: 1.029 0.961 1.016 1.081 2008-Apr-29 22:58:41 LOG4 check_wapp_levels: WAPP-3 power levels: 0.957 0.972 1.051 0.911 2008-Apr-29 22:58:41 LOG4 check_wapp_levels: WAPP-4 power levels: 1.083 1.068 0.942 0.949 2008-Apr-29 22:58:43 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.911 and 1.168 2008-Apr-29 22:58:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.773 < 0.8)! 2008-Apr-29 22:58:59 LOG4 check_wapp_levels: WAPP-1 power levels: 0.943 0.773 1.167 1.080 2008-Apr-29 22:58:59 LOG4 check_wapp_levels: WAPP-2 power levels: 1.030 0.962 1.016 1.082 2008-Apr-29 22:58:59 LOG4 check_wapp_levels: WAPP-3 power levels: 0.957 0.971 1.051 0.911 2008-Apr-29 22:58:59 LOG4 check_wapp_levels: WAPP-4 power levels: 1.082 1.068 0.943 0.950 2008-Apr-29 22:59:01 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.912 and 1.167 2008-Apr-29 22:59:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.669 < 0.8)! 2008-Apr-29 22:59:04 LOG4 check_wapp_levels: WAPP-1 power levels: 0.945 0.669 1.165 1.080 2008-Apr-29 22:59:04 LOG4 check_wapp_levels: WAPP-2 power levels: 1.031 0.960 1.016 1.081 2008-Apr-29 22:59:04 LOG4 check_wapp_levels: WAPP-3 power levels: 0.956 0.971 1.053 0.911 2008-Apr-29 22:59:04 LOG4 check_wapp_levels: WAPP-4 power levels: 1.083 1.067 0.943 0.950 2008-Apr-29 22:59:06 INFO5 check_wapp_levels: WAPP power levels are between 0.748 and 1.164 (still bad) 2008-Apr-29 22:59:08 INFO5 check_wapp_levels: WAPP power levels are between 0.604 and 1.167 (still bad) 2008-Apr-29 22:59:10 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.913 and 1.168 2008-Apr-29 22:59:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.679 < 0.8)! 2008-Apr-29 22:59:12 LOG4 check_wapp_levels: WAPP-1 power levels: 0.945 0.679 1.169 1.079 2008-Apr-29 22:59:12 LOG4 check_wapp_levels: WAPP-2 power levels: 1.030 0.963 1.017 1.081 2008-Apr-29 22:59:12 LOG4 check_wapp_levels: WAPP-3 power levels: 0.959 0.971 1.053 0.912 2008-Apr-29 22:59:12 LOG4 check_wapp_levels: WAPP-4 power levels: 1.083 1.069 0.943 0.951 2008-Apr-29 22:59:14 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.912 and 1.170 2008-Apr-29 22:59:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.587 < 0.8)! 2008-Apr-29 22:59:18 LOG4 check_wapp_levels: WAPP-1 power levels: 0.943 0.587 1.166 1.080 2008-Apr-29 22:59:18 LOG4 check_wapp_levels: WAPP-2 power levels: 1.029 0.960 1.018 1.081 2008-Apr-29 22:59:18 LOG4 check_wapp_levels: WAPP-3 power levels: 0.956 0.972 1.054 0.913 2008-Apr-29 22:59:18 LOG4 check_wapp_levels: WAPP-4 power levels: 1.082 1.069 0.941 0.951 2008-Apr-29 22:59:20 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.913 and 1.164 2008-Apr-29 22:59:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.636 < 0.8)! 2008-Apr-29 22:59:22 LOG4 check_wapp_levels: WAPP-1 power levels: 0.947 0.636 1.164 1.079 2008-Apr-29 22:59:22 LOG4 check_wapp_levels: WAPP-2 power levels: 1.029 0.961 1.017 1.083 2008-Apr-29 22:59:22 LOG4 check_wapp_levels: WAPP-3 power levels: 0.956 0.970 1.053 0.913 2008-Apr-29 22:59:22 LOG4 check_wapp_levels: WAPP-4 power levels: 1.083 1.067 0.942 0.950 2008-Apr-29 22:59:24 INFO5 check_wapp_levels: WAPP power levels are between 0.748 and 1.164 (still bad) 2008-Apr-29 22:59:26 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.914 and 1.165 2008-Apr-29 22:59:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.691 < 0.8)! 2008-Apr-29 22:59:30 LOG4 check_wapp_levels: WAPP-1 power levels: 0.946 0.691 1.163 1.081 2008-Apr-29 22:59:30 LOG4 check_wapp_levels: WAPP-2 power levels: 1.029 0.960 1.018 1.082 2008-Apr-29 22:59:30 LOG4 check_wapp_levels: WAPP-3 power levels: 0.954 0.971 1.051 0.912 2008-Apr-29 22:59:30 LOG4 check_wapp_levels: WAPP-4 power levels: 1.084 1.070 0.944 0.951 2008-Apr-29 22:59:32 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.912 and 1.166 2008-Apr-29 22:59:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.731 < 0.8)! 2008-Apr-29 22:59:42 LOG4 check_wapp_levels: WAPP-1 power levels: 0.948 0.731 1.164 1.080 2008-Apr-29 22:59:42 LOG4 check_wapp_levels: WAPP-2 power levels: 1.032 0.960 1.018 1.083 2008-Apr-29 22:59:42 LOG4 check_wapp_levels: WAPP-3 power levels: 0.955 0.971 1.052 0.913 2008-Apr-29 22:59:42 LOG4 check_wapp_levels: WAPP-4 power levels: 1.083 1.067 0.943 0.950 2008-Apr-29 22:59:44 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.912 and 1.166 2008-Apr-29 23:00:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.774 < 0.8)! 2008-Apr-29 23:00:18 LOG4 check_wapp_levels: WAPP-1 power levels: 0.946 0.774 1.166 1.081 2008-Apr-29 23:00:18 LOG4 check_wapp_levels: WAPP-2 power levels: 1.030 0.961 1.016 1.083 2008-Apr-29 23:00:18 LOG4 check_wapp_levels: WAPP-3 power levels: 0.955 0.969 1.051 0.912 2008-Apr-29 23:00:18 LOG4 check_wapp_levels: WAPP-4 power levels: 1.081 1.068 0.942 0.952 2008-Apr-29 23:00:20 INFO5 check_wapp_levels: WAPP power levels are between 0.764 and 1.164 (still bad) 2008-Apr-29 23:00:22 INFO5 check_wapp_levels: WAPP power levels are between 0.790 and 1.163 (still bad) 2008-Apr-29 23:00:24 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.897 and 1.162 2008-Apr-29 23:00:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.766 < 0.8)! 2008-Apr-29 23:00:26 LOG4 check_wapp_levels: WAPP-1 power levels: 0.943 0.766 1.166 1.081 2008-Apr-29 23:00:26 LOG4 check_wapp_levels: WAPP-2 power levels: 1.028 0.962 1.018 1.083 2008-Apr-29 23:00:26 LOG4 check_wapp_levels: WAPP-3 power levels: 0.955 0.969 1.052 0.912 2008-Apr-29 23:00:26 LOG4 check_wapp_levels: WAPP-4 power levels: 1.082 1.069 0.943 0.951 2008-Apr-29 23:00:28 INFO5 check_wapp_levels: WAPP power levels are between 0.681 and 1.168 (still bad) 2008-Apr-29 23:00:31 INFO5 check_wapp_levels: WAPP power levels are between 0.703 and 1.167 (still bad) 2008-Apr-29 23:00:33 INFO5 check_wapp_levels: WAPP power levels are between 0.750 and 1.166 (still bad) 2008-Apr-29 23:00:35 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.900 and 1.166 2008-Apr-29 23:00:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.783 < 0.8)! 2008-Apr-29 23:00:39 LOG4 check_wapp_levels: WAPP-1 power levels: 0.954 0.783 1.167 1.082 2008-Apr-29 23:00:39 LOG4 check_wapp_levels: WAPP-2 power levels: 1.031 0.961 1.016 1.082 2008-Apr-29 23:00:39 LOG4 check_wapp_levels: WAPP-3 power levels: 0.956 0.969 1.052 0.911 2008-Apr-29 23:00:39 LOG4 check_wapp_levels: WAPP-4 power levels: 1.081 1.067 0.942 0.950 2008-Apr-29 23:00:41 INFO5 check_wapp_levels: WAPP power levels are between 0.798 and 1.166 (still bad) 2008-Apr-29 23:00:43 INFO5 check_wapp_levels: WAPP power levels are between 0.761 and 1.168 (still bad) 2008-Apr-29 23:00:45 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.895 and 1.166 2008-Apr-29 23:00:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.782 < 0.8)! 2008-Apr-29 23:00:49 LOG4 check_wapp_levels: WAPP-1 power levels: 0.953 0.782 1.166 1.078 2008-Apr-29 23:00:49 LOG4 check_wapp_levels: WAPP-2 power levels: 1.029 0.960 1.017 1.082 2008-Apr-29 23:00:49 LOG4 check_wapp_levels: WAPP-3 power levels: 0.954 0.968 1.050 0.911 2008-Apr-29 23:00:49 LOG4 check_wapp_levels: WAPP-4 power levels: 1.083 1.069 0.943 0.951 2008-Apr-29 23:00:51 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.910 and 1.166 2008-Apr-29 23:00:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.746 < 0.8)! 2008-Apr-29 23:00:57 LOG4 check_wapp_levels: WAPP-1 power levels: 0.952 0.746 1.167 1.080 2008-Apr-29 23:00:57 LOG4 check_wapp_levels: WAPP-2 power levels: 1.032 0.960 1.018 1.083 2008-Apr-29 23:00:57 LOG4 check_wapp_levels: WAPP-3 power levels: 0.954 0.969 1.052 0.910 2008-Apr-29 23:00:57 LOG4 check_wapp_levels: WAPP-4 power levels: 1.080 1.068 0.941 0.950 2008-Apr-29 23:00:59 INFO5 check_wapp_levels: WAPP power levels are between 0.704 and 1.164 (still bad) 2008-Apr-29 23:01:01 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.811 and 1.165 2008-Apr-29 23:01:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.783 < 0.8)! 2008-Apr-29 23:01:21 LOG4 check_wapp_levels: WAPP-1 power levels: 0.945 0.783 1.164 1.082 2008-Apr-29 23:01:21 LOG4 check_wapp_levels: WAPP-2 power levels: 1.036 0.964 1.017 1.082 2008-Apr-29 23:01:21 LOG4 check_wapp_levels: WAPP-3 power levels: 0.955 0.972 1.051 0.911 2008-Apr-29 23:01:21 LOG4 check_wapp_levels: WAPP-4 power levels: 1.081 1.068 0.942 0.950 2008-Apr-29 23:01:23 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.863 and 1.167 2008-Apr-29 23:01:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.688 < 0.8)! 2008-Apr-29 23:01:31 LOG4 check_wapp_levels: WAPP-1 power levels: 0.946 0.688 1.168 1.080 2008-Apr-29 23:01:31 LOG4 check_wapp_levels: WAPP-2 power levels: 1.034 0.964 1.019 1.083 2008-Apr-29 23:01:31 LOG4 check_wapp_levels: WAPP-3 power levels: 0.955 0.972 1.050 0.911 2008-Apr-29 23:01:31 LOG4 check_wapp_levels: WAPP-4 power levels: 1.082 1.070 0.943 0.951 2008-Apr-29 23:01:33 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.854 and 1.168 2008-Apr-29 23:01:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.793 < 0.8)! 2008-Apr-29 23:01:39 LOG4 check_wapp_levels: WAPP-1 power levels: 0.944 0.793 1.169 1.080 2008-Apr-29 23:01:39 LOG4 check_wapp_levels: WAPP-2 power levels: 1.031 0.961 1.019 1.083 2008-Apr-29 23:01:39 LOG4 check_wapp_levels: WAPP-3 power levels: 0.956 0.970 1.052 0.910 2008-Apr-29 23:01:39 LOG4 check_wapp_levels: WAPP-4 power levels: 1.082 1.070 0.943 0.951 2008-Apr-29 23:01:41 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.805 and 1.168 2008-Apr-29 23:01:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.713 < 0.8)! 2008-Apr-29 23:01:43 LOG4 check_wapp_levels: WAPP-1 power levels: 0.948 0.713 1.167 1.081 2008-Apr-29 23:01:43 LOG4 check_wapp_levels: WAPP-2 power levels: 1.030 0.961 1.018 1.082 2008-Apr-29 23:01:43 LOG4 check_wapp_levels: WAPP-3 power levels: 0.956 0.972 1.052 0.911 2008-Apr-29 23:01:43 LOG4 check_wapp_levels: WAPP-4 power levels: 1.083 1.069 0.943 0.951 2008-Apr-29 23:01:45 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.851 and 1.166 2008-Apr-29 23:01:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.738 < 0.8)! 2008-Apr-29 23:01:47 LOG4 check_wapp_levels: WAPP-1 power levels: 0.945 0.738 1.168 1.081 2008-Apr-29 23:01:47 LOG4 check_wapp_levels: WAPP-2 power levels: 1.032 0.962 1.018 1.083 2008-Apr-29 23:01:47 LOG4 check_wapp_levels: WAPP-3 power levels: 0.956 0.972 1.054 0.911 2008-Apr-29 23:01:47 LOG4 check_wapp_levels: WAPP-4 power levels: 1.083 1.069 0.943 0.952 2008-Apr-29 23:01:49 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.911 and 1.169 2008-Apr-29 23:01:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.769 < 0.8)! 2008-Apr-29 23:01:53 LOG4 check_wapp_levels: WAPP-1 power levels: 0.943 0.769 1.167 1.082 2008-Apr-29 23:01:53 LOG4 check_wapp_levels: WAPP-2 power levels: 1.032 0.960 1.017 1.084 2008-Apr-29 23:01:53 LOG4 check_wapp_levels: WAPP-3 power levels: 0.956 0.970 1.050 0.910 2008-Apr-29 23:01:53 LOG4 check_wapp_levels: WAPP-4 power levels: 1.082 1.068 0.942 0.951 2008-Apr-29 23:01:55 INFO5 check_wapp_levels: WAPP power levels are between 0.659 and 1.167 (still bad) 2008-Apr-29 23:01:58 INFO5 check_wapp_levels: WAPP power levels are between 0.760 and 1.167 (still bad) 2008-Apr-29 23:02:00 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.910 and 1.168 2008-Apr-29 23:02:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.758 < 0.8)! 2008-Apr-29 23:02:16 LOG4 check_wapp_levels: WAPP-1 power levels: 0.945 0.758 1.175 1.089 2008-Apr-29 23:02:16 LOG4 check_wapp_levels: WAPP-2 power levels: 1.029 0.960 1.018 1.081 2008-Apr-29 23:02:16 LOG4 check_wapp_levels: WAPP-3 power levels: 0.958 0.972 1.053 0.912 2008-Apr-29 23:02:16 LOG4 check_wapp_levels: WAPP-4 power levels: 1.083 1.067 0.944 0.950 2008-Apr-29 23:02:18 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.911 and 1.173 2008-Apr-29 23:02:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.731 < 0.8)! 2008-Apr-29 23:02:26 LOG4 check_wapp_levels: WAPP-1 power levels: 0.941 0.731 1.161 1.081 2008-Apr-29 23:02:26 LOG4 check_wapp_levels: WAPP-2 power levels: 1.028 0.960 1.019 1.082 2008-Apr-29 23:02:26 LOG4 check_wapp_levels: WAPP-3 power levels: 0.955 0.971 1.055 0.914 2008-Apr-29 23:02:26 LOG4 check_wapp_levels: WAPP-4 power levels: 1.084 1.069 0.944 0.951 2008-Apr-29 23:02:28 INFO5 check_wapp_levels: WAPP power levels are between 0.788 and 1.165 (still bad) 2008-Apr-29 23:02:30 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.916 and 1.169 2008-Apr-29 23:02:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.787 < 0.8)! 2008-Apr-29 23:02:40 LOG4 check_wapp_levels: WAPP-1 power levels: 0.947 0.787 1.169 1.081 2008-Apr-29 23:02:40 LOG4 check_wapp_levels: WAPP-2 power levels: 1.032 0.963 1.016 1.083 2008-Apr-29 23:02:40 LOG4 check_wapp_levels: WAPP-3 power levels: 0.957 0.972 1.059 0.918 2008-Apr-29 23:02:40 LOG4 check_wapp_levels: WAPP-4 power levels: 1.085 1.071 0.945 0.953 2008-Apr-29 23:02:42 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.843 and 1.169 2008-Apr-29 23:02:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.636 < 0.8)! 2008-Apr-29 23:02:44 LOG4 check_wapp_levels: WAPP-1 power levels: 0.948 0.636 1.168 1.080 2008-Apr-29 23:02:44 LOG4 check_wapp_levels: WAPP-2 power levels: 1.032 0.961 1.016 1.082 2008-Apr-29 23:02:44 LOG4 check_wapp_levels: WAPP-3 power levels: 0.957 0.973 1.056 0.914 2008-Apr-29 23:02:44 LOG4 check_wapp_levels: WAPP-4 power levels: 1.087 1.073 0.947 0.954 2008-Apr-29 23:02:46 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.913 and 1.167 2008-Apr-29 23:02:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.597 < 0.8)! 2008-Apr-29 23:02:50 LOG4 check_wapp_levels: WAPP-1 power levels: 0.948 0.597 1.168 1.081 2008-Apr-29 23:02:50 LOG4 check_wapp_levels: WAPP-2 power levels: 1.030 0.961 1.016 1.082 2008-Apr-29 23:02:50 LOG4 check_wapp_levels: WAPP-3 power levels: 0.957 0.972 1.052 0.912 2008-Apr-29 23:02:50 LOG4 check_wapp_levels: WAPP-4 power levels: 1.087 1.075 0.946 0.956 2008-Apr-29 23:02:52 INFO5 check_wapp_levels: WAPP power levels are between 0.775 and 1.167 (still bad) 2008-Apr-29 23:02:54 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.902 and 1.168 2008-Apr-29 23:02:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.773 < 0.8)! 2008-Apr-29 23:02:56 LOG4 check_wapp_levels: WAPP-1 power levels: 0.952 0.773 1.173 1.081 2008-Apr-29 23:02:56 LOG4 check_wapp_levels: WAPP-2 power levels: 1.031 0.963 1.017 1.083 2008-Apr-29 23:02:56 LOG4 check_wapp_levels: WAPP-3 power levels: 0.959 0.973 1.053 0.912 2008-Apr-29 23:02:56 LOG4 check_wapp_levels: WAPP-4 power levels: 1.085 1.071 0.945 0.953 2008-Apr-29 23:02:58 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.912 and 1.172 2008-Apr-29 23:03:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.719 < 0.8)! 2008-Apr-29 23:03:21 LOG4 check_wapp_levels: WAPP-1 power levels: 0.947 0.719 1.173 1.085 2008-Apr-29 23:03:21 LOG4 check_wapp_levels: WAPP-2 power levels: 1.028 0.961 1.021 1.084 2008-Apr-29 23:03:21 LOG4 check_wapp_levels: WAPP-3 power levels: 0.957 0.975 1.055 0.913 2008-Apr-29 23:03:21 LOG4 check_wapp_levels: WAPP-4 power levels: 1.085 1.070 0.944 0.952 2008-Apr-29 23:03:23 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.883 and 1.171 2008-Apr-29 23:03:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.786 < 0.8)! 2008-Apr-29 23:03:43 LOG4 check_wapp_levels: WAPP-1 power levels: 0.945 0.786 1.168 1.081 2008-Apr-29 23:03:43 LOG4 check_wapp_levels: WAPP-2 power levels: 1.032 0.965 1.019 1.082 2008-Apr-29 23:03:43 LOG4 check_wapp_levels: WAPP-3 power levels: 0.958 0.976 1.054 0.915 2008-Apr-29 23:03:43 LOG4 check_wapp_levels: WAPP-4 power levels: 1.083 1.069 0.943 0.951 2008-Apr-29 23:03:45 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.913 and 1.168 2008-Apr-29 23:03:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.749 < 0.8)! 2008-Apr-29 23:03:55 LOG4 check_wapp_levels: WAPP-1 power levels: 0.945 0.749 1.166 1.080 2008-Apr-29 23:03:55 LOG4 check_wapp_levels: WAPP-2 power levels: 1.032 0.961 1.017 1.083 2008-Apr-29 23:03:55 LOG4 check_wapp_levels: WAPP-3 power levels: 0.960 0.977 1.052 0.914 2008-Apr-29 23:03:55 LOG4 check_wapp_levels: WAPP-4 power levels: 1.085 1.070 0.943 0.952 2008-Apr-29 23:03:57 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.913 and 1.166 2008-Apr-29 23:04:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.636 < 0.8)! 2008-Apr-29 23:04:05 LOG4 check_wapp_levels: WAPP-1 power levels: 0.950 0.636 1.165 1.082 2008-Apr-29 23:04:05 LOG4 check_wapp_levels: WAPP-2 power levels: 1.032 0.964 1.019 1.083 2008-Apr-29 23:04:05 LOG4 check_wapp_levels: WAPP-3 power levels: 0.961 0.978 1.054 0.913 2008-Apr-29 23:04:05 LOG4 check_wapp_levels: WAPP-4 power levels: 1.084 1.070 0.943 0.952 2008-Apr-29 23:04:07 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.913 and 1.164 2008-Apr-29 23:04:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.696 < 0.8)! 2008-Apr-29 23:04:09 LOG4 check_wapp_levels: WAPP-1 power levels: 0.948 0.696 1.163 1.080 2008-Apr-29 23:04:09 LOG4 check_wapp_levels: WAPP-2 power levels: 1.031 0.963 1.018 1.083 2008-Apr-29 23:04:09 LOG4 check_wapp_levels: WAPP-3 power levels: 0.961 0.979 1.052 0.913 2008-Apr-29 23:04:09 LOG4 check_wapp_levels: WAPP-4 power levels: 1.085 1.069 0.943 0.952 2008-Apr-29 23:04:11 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.914 and 1.166 2008-Apr-29 23:05:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.736 < 0.8)! 2008-Apr-29 23:05:00 LOG4 check_wapp_levels: WAPP-1 power levels: 0.951 0.736 1.169 1.083 2008-Apr-29 23:05:00 LOG4 check_wapp_levels: WAPP-2 power levels: 1.032 0.962 1.019 1.083 2008-Apr-29 23:05:00 LOG4 check_wapp_levels: WAPP-3 power levels: 0.961 0.976 1.054 0.914 2008-Apr-29 23:05:00 LOG4 check_wapp_levels: WAPP-4 power levels: 1.085 1.069 0.943 0.952 2008-Apr-29 23:05:02 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.914 and 1.172 2008-Apr-29 23:06:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.769 < 0.8)! 2008-Apr-29 23:06:21 LOG4 check_wapp_levels: WAPP-1 power levels: 0.951 0.769 1.174 1.088 2008-Apr-29 23:06:21 LOG4 check_wapp_levels: WAPP-2 power levels: 1.031 0.962 1.020 1.084 2008-Apr-29 23:06:21 LOG4 check_wapp_levels: WAPP-3 power levels: 0.956 0.972 1.056 0.912 2008-Apr-29 23:06:21 LOG4 check_wapp_levels: WAPP-4 power levels: 1.088 1.074 0.948 0.956 2008-Apr-29 23:06:23 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.902 and 1.175 2008-Apr-29 23:06:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.730 < 0.8)! 2008-Apr-29 23:06:27 LOG4 check_wapp_levels: WAPP-1 power levels: 0.951 0.730 1.173 1.085 2008-Apr-29 23:06:27 LOG4 check_wapp_levels: WAPP-2 power levels: 1.034 0.962 1.018 1.082 2008-Apr-29 23:06:27 LOG4 check_wapp_levels: WAPP-3 power levels: 0.957 0.971 1.056 0.912 2008-Apr-29 23:06:27 LOG4 check_wapp_levels: WAPP-4 power levels: 1.088 1.073 0.948 0.954 2008-Apr-29 23:06:29 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.913 and 1.172 2008-Apr-29 23:06:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.779 < 0.8)! 2008-Apr-29 23:06:37 LOG4 check_wapp_levels: WAPP-1 power levels: 0.950 0.779 1.175 1.086 2008-Apr-29 23:06:37 LOG4 check_wapp_levels: WAPP-2 power levels: 1.031 0.961 1.018 1.082 2008-Apr-29 23:06:37 LOG4 check_wapp_levels: WAPP-3 power levels: 0.957 0.973 1.056 0.913 2008-Apr-29 23:06:37 LOG4 check_wapp_levels: WAPP-4 power levels: 1.085 1.071 0.945 0.952 2008-Apr-29 23:06:39 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.873 and 1.175 2008-Apr-29 23:07:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.626 < 0.8)! 2008-Apr-29 23:07:29 LOG4 check_wapp_levels: WAPP-1 power levels: 0.948 0.626 1.180 1.090 2008-Apr-29 23:07:29 LOG4 check_wapp_levels: WAPP-2 power levels: 1.031 0.962 1.017 1.081 2008-Apr-29 23:07:29 LOG4 check_wapp_levels: WAPP-3 power levels: 0.956 0.972 1.056 0.913 2008-Apr-29 23:07:29 LOG4 check_wapp_levels: WAPP-4 power levels: 1.164 1.159 1.014 1.031 2008-Apr-29 23:07:31 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.912 and 1.186 2008-Apr-29 23:07:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.729 < 0.8)! 2008-Apr-29 23:07:37 LOG4 check_wapp_levels: WAPP-1 power levels: 0.961 0.729 1.210 1.119 2008-Apr-29 23:07:37 LOG4 check_wapp_levels: WAPP-2 power levels: 1.030 0.962 1.020 1.083 2008-Apr-29 23:07:37 LOG4 check_wapp_levels: WAPP-3 power levels: 0.958 0.974 1.055 0.912 2008-Apr-29 23:07:37 LOG4 check_wapp_levels: WAPP-4 power levels: 1.093 1.085 0.953 0.965 2008-Apr-29 23:07:39 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.881 and 1.216 2008-Apr-29 23:07:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.670 < 0.8)! 2008-Apr-29 23:07:46 LOG4 check_wapp_levels: WAPP-1 power levels: 0.970 0.670 1.216 1.125 2008-Apr-29 23:07:46 LOG4 check_wapp_levels: WAPP-2 power levels: 1.031 0.962 1.020 1.083 2008-Apr-29 23:07:46 LOG4 check_wapp_levels: WAPP-3 power levels: 0.958 0.974 1.054 0.911 2008-Apr-29 23:07:46 LOG4 check_wapp_levels: WAPP-4 power levels: 1.082 1.070 0.943 0.952 2008-Apr-29 23:07:48 INFO5 check_wapp_levels: WAPP power levels are between 0.757 and 1.208 (still bad) 2008-Apr-29 23:07:50 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.911 and 1.201 2008-Apr-29 23:07:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.711 < 0.8)! 2008-Apr-29 23:07:54 LOG4 check_wapp_levels: WAPP-1 power levels: 0.951 0.711 1.184 1.095 2008-Apr-29 23:07:54 LOG4 check_wapp_levels: WAPP-2 power levels: 1.040 0.970 1.019 1.082 2008-Apr-29 23:07:54 LOG4 check_wapp_levels: WAPP-3 power levels: 0.956 0.974 1.053 0.912 2008-Apr-29 23:07:54 LOG4 check_wapp_levels: WAPP-4 power levels: 1.082 1.070 0.943 0.952 2008-Apr-29 23:07:56 INFO5 check_wapp_levels: WAPP power levels are between 0.681 and 1.177 (still bad) 2008-Apr-29 23:07:58 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.860 and 1.173 2008-Apr-29 23:08:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.676 < 0.8)! 2008-Apr-29 23:08:04 LOG4 check_wapp_levels: WAPP-1 power levels: 0.954 0.676 1.178 1.089 2008-Apr-29 23:08:04 LOG4 check_wapp_levels: WAPP-2 power levels: 1.118 1.055 1.018 1.083 2008-Apr-29 23:08:04 LOG4 check_wapp_levels: WAPP-3 power levels: 0.957 0.973 1.054 0.913 2008-Apr-29 23:08:04 LOG4 check_wapp_levels: WAPP-4 power levels: 1.084 1.071 0.944 0.952 2008-Apr-29 23:08:06 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.825 and 1.176 2008-Apr-29 23:08:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.777 < 0.8)! 2008-Apr-29 23:08:14 LOG4 check_wapp_levels: WAPP-1 power levels: 0.945 0.777 1.172 1.085 2008-Apr-29 23:08:14 LOG4 check_wapp_levels: WAPP-2 power levels: 1.070 1.002 1.020 1.083 2008-Apr-29 23:08:14 LOG4 check_wapp_levels: WAPP-3 power levels: 0.957 0.971 1.055 0.914 2008-Apr-29 23:08:14 LOG4 check_wapp_levels: WAPP-4 power levels: 1.084 1.070 0.944 0.952 2008-Apr-29 23:08:16 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.914 and 1.171 2008-Apr-29 23:08:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.664 < 0.8)! 2008-Apr-29 23:08:18 LOG4 check_wapp_levels: WAPP-1 power levels: 0.945 0.664 1.171 1.085 2008-Apr-29 23:08:18 LOG4 check_wapp_levels: WAPP-2 power levels: 1.048 0.977 1.019 1.084 2008-Apr-29 23:08:18 LOG4 check_wapp_levels: WAPP-3 power levels: 0.956 0.973 1.055 0.913 2008-Apr-29 23:08:18 LOG4 check_wapp_levels: WAPP-4 power levels: 1.083 1.070 0.943 0.952 2008-Apr-29 23:08:20 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.911 and 1.171 2008-Apr-29 23:08:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.707 < 0.8)! 2008-Apr-29 23:08:30 LOG4 check_wapp_levels: WAPP-1 power levels: 0.944 0.707 1.169 1.085 2008-Apr-29 23:08:30 LOG4 check_wapp_levels: WAPP-2 power levels: 1.053 0.981 1.020 1.085 2008-Apr-29 23:08:30 LOG4 check_wapp_levels: WAPP-3 power levels: 0.955 0.972 1.053 0.913 2008-Apr-29 23:08:30 LOG4 check_wapp_levels: WAPP-4 power levels: 1.083 1.070 0.943 0.952 2008-Apr-29 23:08:32 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.835 and 1.169 2008-Apr-29 23:08:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.707 < 0.8)! 2008-Apr-29 23:08:34 LOG4 check_wapp_levels: WAPP-1 power levels: 0.951 0.707 1.169 1.084 2008-Apr-29 23:08:34 LOG4 check_wapp_levels: WAPP-2 power levels: 1.038 0.967 1.021 1.085 2008-Apr-29 23:08:34 LOG4 check_wapp_levels: WAPP-3 power levels: 0.955 0.972 1.052 0.913 2008-Apr-29 23:08:34 LOG4 check_wapp_levels: WAPP-4 power levels: 1.084 1.069 0.944 0.951 2008-Apr-29 23:08:36 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.855 and 1.169 2008-Apr-29 23:08:47 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-29 23:08:47 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-29 23:08:47 LOG5 end_task: Level: (4) ID = <10480> Status = 0 0 0 0 ok 2008-Apr-29 23:08:47 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-29 23:08:47 LOG5 end_task: Level: (3) ID = <10479> Status = 0 0 0 0 ok 2008-Apr-29 23:08:47 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-29 23:08:47 LOG5 finish_task: Level: (2) ID = <10446> Status = 0 0 0 0 ok 2008-Apr-29 23:08:47 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-29 23:08:47 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-29 23:08:47 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-29 23:08:47 LOG5 end_task: Level: (2) ID = <10446> Status = 0 0 0 0 ok 2008-Apr-29 23:08:47 COMMAND run_command_line: EXECUTING command 51: 'FIXEDDRIFT az=47.49 alfaangle=-21.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p1_067 ra=122900.00 dec=72100.00' 2008-Apr-29 23:08:47 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-29 23:08:48 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-29 23:08:48 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 47.49 -21.4 hcorcal 5 tracking no first 1 AGESVC1B_p1_067 122900.00 72100.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-29 23:08:48 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-29 23:08:48 LOG5 begin_task: Level: (2) ID = <10481> Status = 0 0 0 0 ok 2008-Apr-29 23:08:48 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGESVC1A_p2_066' 2008-Apr-29 23:08:48 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-29 23:08:48 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1B_p1_067} 2008-Apr-29 23:08:48 INFO3 fixed_driftmap: Sending telescope to Az = 47.49 and ZA = 15.90 2008-Apr-29 23:08:48 LOG3 track_source: Calling 'track_source AGESVC1B_p1_067 47.49 15.9036227373 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-29 23:08:48 START begin_task: Starting task 'sending tracking commands' 2008-Apr-29 23:08:48 LOG5 begin_task: Level: (3) ID = <10482> Status = 0 0 0 0 ok 2008-Apr-29 23:08:48 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p1_067} INFO {Slewing to source 'AGESVC1B_p1_067' ...} 2008-Apr-29 23:08:48 INFO1 track_source: Starting to track AGESVC1B_p1_067 2008-Apr-29 23:08:48 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p1_067" 2008-Apr-29 23:08:48 LOG3 vw_send: To DATATAKING: set ra 47.49 2008-Apr-29 23:08:48 LOG3 vw_send: To DATATAKING: set dec 15.9036227373 2008-Apr-29 23:08:48 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-29 23:08:48 LOG3 vw_send: To DATATAKING: pnt tr 47.49 15.9036227373 -CF 2008-Apr-29 23:08:48 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-29 23:08:48 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-29 23:08:48 LOG5 finish_task: Level: (3) ID = <10482> Status = 0 0 0 0 ok 2008-Apr-29 23:08:48 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-29 23:08:48 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 23:08:48 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-29 23:08:48 LOG5 end_task: Level: (3) ID = <10482> Status = 0 0 0 0 ok 2008-Apr-29 23:08:48 START begin_task: Starting task 'rotate ALFA to -21.4 degrees' 2008-Apr-29 23:08:48 LOG5 begin_task: Level: (3) ID = <10483> Status = 0 0 0 0 ok 2008-Apr-29 23:08:48 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -21.4 degrees ...} 2008-Apr-29 23:08:48 INFO2 rotate_alfa: ALFA commanded to -21.4 degrees 2008-Apr-29 23:08:48 LOG3 sock_errsend: To ALFAMOTOR: POSITION -21.4 REPLY 2008-Apr-29 23:08:48 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-29 23:08:48 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-29 23:08:48 LOG5 begin_task: Level: (4) ID = <10484> Status = 0 0 0 0 ok 2008-Apr-29 23:08:48 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p1_067" 2008-Apr-29 23:08:48 LOG4 got_cormsg: From DATATAKING: set ra 47.49 2008-Apr-29 23:08:48 LOG4 got_cormsg: From DATATAKING: set dec 15.9036227373 2008-Apr-29 23:08:48 LOG4 got_cormsg: From DATATAKING: vw% 47.49 2008-Apr-29 23:08:48 LOG4 got_cormsg: From DATATAKING: vw% 15.9036227373 2008-Apr-29 23:08:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 23:08:48 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-29 23:08:48 LOG4 got_cormsg: From DATATAKING: pnt tr 47.49 15.9036227373 -CF 2008-Apr-29 23:08:48 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-29 23:08:48 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-29 23:08:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 23:08:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.764 < 0.8)! 2008-Apr-29 23:08:48 LOG4 check_wapp_levels: WAPP-1 power levels: 0.945 0.764 1.167 1.084 2008-Apr-29 23:08:48 LOG4 check_wapp_levels: WAPP-2 power levels: 1.038 0.964 1.019 1.084 2008-Apr-29 23:08:48 LOG4 check_wapp_levels: WAPP-3 power levels: 0.957 0.972 1.053 0.913 2008-Apr-29 23:08:48 LOG4 check_wapp_levels: WAPP-4 power levels: 1.085 1.070 0.945 0.952 2008-Apr-29 23:08:50 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-29 23:08:50 INFO3 alfa_motor: ALFA rotator in-position -21.40 degrees 2008-Apr-29 23:08:50 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-29 23:08:50 LOG5 end_task: Level: (4) ID = <10484> Status = 0 0 0 0 ok 2008-Apr-29 23:08:50 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-29 23:08:50 STOP finish_task: Finishing task 'rotate ALFA to -21.4 degrees' 2008-Apr-29 23:08:50 LOG5 finish_task: Level: (3) ID = <10483> Status = 0 0 0 0 ok 2008-Apr-29 23:08:50 INFO2 finish_task: DONE finished configuration: rotating ALFA to -21.4 degrees 2008-Apr-29 23:08:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 23:08:50 STOP end_task: Finishing task 'rotate ALFA to -21.4 degrees' with status 'OK' 2008-Apr-29 23:08:50 LOG5 end_task: Level: (3) ID = <10483> Status = 0 0 0 0 ok 2008-Apr-29 23:08:50 START begin_task: Starting task 'waiting on telescope' 2008-Apr-29 23:08:50 LOG5 begin_task: Level: (3) ID = <10485> Status = 0 0 0 0 ok 2008-Apr-29 23:08:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-29 23:08:50 LOG3 waittrk: Start waittrk 5 2008-Apr-29 23:08:50 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-29 23:08:50 LOG5 begin_task: Level: (4) ID = <10486> Status = 0 0 0 0 ok 2008-Apr-29 23:08:55 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-29 23:08:55 LOG5 end_task: Level: (4) ID = <10486> Status = 0 0 0 0 ok 2008-Apr-29 23:08:55 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-29 23:08:55 LOG5 begin_task: Level: (4) ID = <10487> Status = 0 0 0 0 ok 2008-Apr-29 23:09:03 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-29 23:09:03 LOG5 end_task: Level: (4) ID = <10487> Status = 0 0 0 0 ok 2008-Apr-29 23:09:04 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-29 23:09:04 INFO2 waittrk: Now tracking AGESVC1B_p1_067 2008-Apr-29 23:09:04 LOG4 waittrk: Current telescope position: Az = 407.26 ZA = 15.89 2008-Apr-29 23:09:04 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-29 23:09:04 LOG5 finish_task: Level: (3) ID = <10485> Status = 0 0 0 0 ok 2008-Apr-29 23:09:04 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-29 23:09:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 23:09:04 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-29 23:09:04 LOG5 end_task: Level: (3) ID = <10485> Status = 0 0 0 0 ok 2008-Apr-29 23:09:04 START begin_task: Starting task 'selecting calibration type' 2008-Apr-29 23:09:04 LOG5 begin_task: Level: (3) ID = <10488> Status = 0 0 0 0 ok 2008-Apr-29 23:09:04 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-29 23:09:04 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-29 23:09:04 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 23:09:04 START begin_task: Starting task 'waiting on setcal' 2008-Apr-29 23:09:04 LOG5 begin_task: Level: (4) ID = <10489> Status = 0 0 0 0 ok 2008-Apr-29 23:09:04 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-29 23:09:04 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 23:09:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 23:09:05 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-29 23:09:05 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-29 23:09:05 LOG5 end_task: Level: (4) ID = <10489> Status = 0 0 0 0 ok 2008-Apr-29 23:09:05 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-29 23:09:05 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-29 23:09:05 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-29 23:09:05 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-29 23:09:05 LOG5 begin_task: Level: (4) ID = <10490> Status = 0 0 0 0 ok 2008-Apr-29 23:09:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 23:09:05 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-29 23:09:05 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-29 23:09:05 LOG5 end_task: Level: (4) ID = <10490> Status = 0 0 0 0 ok 2008-Apr-29 23:09:05 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-29 23:09:05 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-29 23:09:05 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-29 23:09:05 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-29 23:09:05 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-29 23:09:05 LOG5 begin_task: Level: (4) ID = <10491> Status = 0 0 0 0 ok 2008-Apr-29 23:09:05 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-29 23:09:05 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-29 23:09:05 LOG5 end_task: Level: (4) ID = <10491> Status = 0 0 0 0 ok 2008-Apr-29 23:09:05 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-29 23:09:05 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-29 23:09:05 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-29 23:09:05 LOG5 finish_task: Level: (3) ID = <10488> Status = 0 0 0 0 ok 2008-Apr-29 23:09:05 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-29 23:09:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 23:09:05 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-29 23:09:05 LOG5 end_task: Level: (3) ID = <10488> Status = 0 0 0 0 ok 2008-Apr-29 23:09:05 LOG5 dopset_later: Calling 'dopset_later 38.400563398467021' 2008-Apr-29 23:09:05 INFO3 dopset_later: Setting Doppler correction for 23:09:43 (38.4 seconds from now) 2008-Apr-29 23:09:05 LOG5 antvel: Calling 'antvel 47.490000 15.903623 F 38.400563398467021' 2008-Apr-29 23:09:05 LOG2 antvel: Parameters to Doppler: Heliocentric 97783 2008 120 0.0 2008-Apr-29 23:09:05 INFO5 antvel: Computed antenna velocity: +16.99078 km/s 2008-Apr-29 23:09:05 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=16.990783942099998 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-29 23:09:05 INFO4 dopset_gen: New sky frequencies: 1381.165151 1381.165151 1381.165151 1381.165151 1381.165151 1381.165151 1381.165151 1381.165151 1381.165151 2008-Apr-29 23:09:05 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.165151 sky0=1381.165151 sky1=1381.165151 sky2=1381.165151 sky3=1381.165151 sky4=1381.165151 sky5=1381.165151 sky6=1381.165151 sky7=1381.165151 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-29 23:09:05 LOG2 dopset_gen: Result from 'sky2syn': 1631.165151 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-29 23:09:05 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631165151.0} 2008-Apr-29 23:09:05 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 23:09:05 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-29 23:09:05 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-29 23:09:05 INFO5 fixed_driftmap: Tracking J2000 position: RA = 12:28:26.1 Dec = +07:20:51.0 2008-Apr-29 23:09:05 LOG3 track_source: Calling 'track_source AGESVC1B_p1_067 122826.1 072051.0 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-29 23:09:05 START begin_task: Starting task 'sending tracking commands' 2008-Apr-29 23:09:05 LOG5 begin_task: Level: (3) ID = <10492> Status = 0 0 0 0 ok 2008-Apr-29 23:09:05 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p1_067} INFO {Slewing to source 'AGESVC1B_p1_067' ...} 2008-Apr-29 23:09:05 INFO1 track_source: Starting to track AGESVC1B_p1_067 2008-Apr-29 23:09:05 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p1_067" 2008-Apr-29 23:09:05 LOG3 vw_send: To DATATAKING: set ra 122826.1 2008-Apr-29 23:09:05 LOG3 vw_send: To DATATAKING: set dec 072051.0 2008-Apr-29 23:09:05 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-29 23:09:05 LOG3 vw_send: To DATATAKING: pnt tr 122826.1 072051.0 -CJ 2008-Apr-29 23:09:05 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-29 23:09:06 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-29 23:09:06 LOG5 finish_task: Level: (3) ID = <10492> Status = 0 0 0 0 ok 2008-Apr-29 23:09:06 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-29 23:09:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 23:09:06 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-29 23:09:06 LOG5 end_task: Level: (3) ID = <10492> Status = 0 0 0 0 ok 2008-Apr-29 23:09:06 START begin_task: Starting task 'waiting on telescope' 2008-Apr-29 23:09:06 LOG5 begin_task: Level: (3) ID = <10493> Status = 0 0 0 0 ok 2008-Apr-29 23:09:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-29 23:09:06 LOG3 waittrk: Start waittrk 5 2008-Apr-29 23:09:06 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-29 23:09:06 LOG5 begin_task: Level: (4) ID = <10494> Status = 0 0 0 0 ok 2008-Apr-29 23:09:06 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631165151.0} 2008-Apr-29 23:09:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-29 23:09:06 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-29 23:09:06 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p1_067" 2008-Apr-29 23:09:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 23:09:06 LOG4 got_cormsg: From DATATAKING: set ra 122826.1 2008-Apr-29 23:09:06 LOG4 got_cormsg: From DATATAKING: set dec 072051.0 2008-Apr-29 23:09:06 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-29 23:09:06 LOG4 got_cormsg: From DATATAKING: pnt tr 122826.1 072051.0 -CJ 2008-Apr-29 23:09:06 LOG4 got_cormsg: From DATATAKING: 122826.1 2008-Apr-29 23:09:06 LOG4 got_cormsg: From DATATAKING: vw% 072051.0 2008-Apr-29 23:09:06 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2008-Apr-29 23:09:06 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-29 23:09:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 23:09:11 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-29 23:09:11 LOG5 end_task: Level: (4) ID = <10494> Status = 0 0 0 0 ok 2008-Apr-29 23:09:11 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-29 23:09:11 LOG5 begin_task: Level: (4) ID = <10495> Status = 0 0 0 0 ok 2008-Apr-29 23:09:13 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-29 23:09:13 LOG5 end_task: Level: (4) ID = <10495> Status = 0 0 0 0 ok 2008-Apr-29 23:09:13 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-29 23:09:13 INFO2 waittrk: Now tracking AGESVC1B_p1_067 2008-Apr-29 23:09:13 LOG4 waittrk: Current telescope position: Az = 407.29 ZA = 15.90 2008-Apr-29 23:09:13 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-29 23:09:13 LOG5 finish_task: Level: (3) ID = <10493> Status = 0 0 0 0 ok 2008-Apr-29 23:09:13 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-29 23:09:13 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 23:09:13 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-29 23:09:13 LOG5 end_task: Level: (3) ID = <10493> Status = 0 0 0 0 ok 2008-Apr-29 23:09:13 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-29 23:09:13 LOG5 begin_task: Level: (3) ID = <10496> Status = 0 0 0 0 ok 2008-Apr-29 23:09:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-29 23:09:13 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-29 23:09:13 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-29 23:09:13 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-29 23:09:13 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 23:09:13 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-29 23:09:13 LOG5 begin_task: Level: (4) ID = <10497> Status = 0 0 0 0 ok 2008-Apr-29 23:09:13 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-29 23:09:13 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 23:09:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 23:09:16 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-29 23:09:16 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-29 23:09:16 LOG5 end_task: Level: (4) ID = <10497> Status = 0 0 0 0 ok 2008-Apr-29 23:09:16 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-29 23:09:16 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-29 23:09:16 LOG5 begin_task: Level: (4) ID = <10498> Status = 0 0 0 0 ok 2008-Apr-29 23:09:16 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-29 23:09:16 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-29 23:09:16 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-29 23:09:16 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-29 23:09:16 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-29 23:09:16 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-29 23:09:16 LOG5 begin_task: Level: (5) ID = <10499> Status = 0 0 0 0 ok 2008-Apr-29 23:09:16 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-29 23:09:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 23:09:16 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 0 dB --- beam 1: 8 6 dB 2008-Apr-29 23:09:16 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 6 dB 2008-Apr-29 23:09:16 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-29 23:09:16 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 3 3 dB 2008-Apr-29 23:09:17 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-29 23:09:17 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-29 23:09:17 LOG5 end_task: Level: (5) ID = <10499> Status = 0 0 0 0 ok 2008-Apr-29 23:09:17 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.954 0.810 ALFA beam 1: 0.910 1.091 2008-Apr-29 23:09:17 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.044 0.978 ALFA beam 3: 1.031 1.097 2008-Apr-29 23:09:17 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.966 0.982 ALFA beam 5: 1.055 0.918 2008-Apr-29 23:09:17 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.092 1.074 ALFA beam 7: 0.949 0.956 2008-Apr-29 23:09:17 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-29 23:09:17 LOG5 finish_task: Level: (4) ID = <10498> Status = 0 0 0 0 ok 2008-Apr-29 23:09:17 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-29 23:09:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 23:09:17 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-29 23:09:17 LOG5 end_task: Level: (4) ID = <10498> Status = 0 0 0 0 ok 2008-Apr-29 23:09:17 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-29 23:09:17 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-29 23:09:17 LOG5 finish_task: Level: (3) ID = <10496> Status = 0 0 0 0 ok 2008-Apr-29 23:09:17 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-29 23:09:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 23:09:17 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-29 23:09:17 LOG5 end_task: Level: (3) ID = <10496> Status = 0 0 0 0 ok 2008-Apr-29 23:09:17 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Karen O'Neil 2008-Apr-29 23:09:17 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Karen O'Neil 2008-Apr-29 23:09:17 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Karen O'Neil 2008-Apr-29 23:09:17 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Karen O'Neil 2008-Apr-29 23:09:17 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-29 23:09:17 START begin_task: Starting task 'WAPP calibration' 2008-Apr-29 23:09:17 LOG5 begin_task: Level: (3) ID = <10500> Status = 0 0 0 0 ok 2008-Apr-29 23:09:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-29 23:09:17 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-29 23:09:17 START begin_task: Starting task 'selecting calibration type' 2008-Apr-29 23:09:17 LOG5 begin_task: Level: (4) ID = <10501> Status = 0 0 0 0 ok 2008-Apr-29 23:09:17 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-29 23:09:17 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-29 23:09:17 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 23:09:17 START begin_task: Starting task 'waiting on setcal' 2008-Apr-29 23:09:17 LOG5 begin_task: Level: (5) ID = <10502> Status = 0 0 0 0 ok 2008-Apr-29 23:09:17 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Karen O'Neil' 2008-Apr-29 23:09:17 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-29 23:09:17 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-29 23:09:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 23:09:17 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-29 23:09:17 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-29 23:09:17 LOG5 end_task: Level: (5) ID = <10502> Status = 0 0 0 0 ok 2008-Apr-29 23:09:17 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-29 23:09:17 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-29 23:09:17 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-29 23:09:17 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-29 23:09:17 LOG5 begin_task: Level: (5) ID = <10503> Status = 0 0 0 0 ok 2008-Apr-29 23:09:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 23:09:17 NOTE WAPPDATA-new_file: New FITS file: wapp.20080429.a2048.0012.fits 2008-Apr-29 23:09:17 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080429.a2048.0012.fits} 2008-Apr-29 23:09:18 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-29 23:09:18 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-29 23:09:18 LOG5 end_task: Level: (5) ID = <10503> Status = 0 0 0 0 ok 2008-Apr-29 23:09:18 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-29 23:09:18 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-29 23:09:18 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-29 23:09:18 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-29 23:09:18 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-29 23:09:18 LOG5 begin_task: Level: (5) ID = <10504> Status = 0 0 0 0 ok 2008-Apr-29 23:09:18 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-29 23:09:18 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-29 23:09:18 LOG5 end_task: Level: (5) ID = <10504> Status = 0 0 0 0 ok 2008-Apr-29 23:09:18 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-29 23:09:18 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-29 23:09:18 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-29 23:09:18 LOG5 finish_task: Level: (4) ID = <10501> Status = 0 0 0 0 ok 2008-Apr-29 23:09:18 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-29 23:09:18 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 23:09:18 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-29 23:09:18 LOG5 end_task: Level: (4) ID = <10501> Status = 0 0 0 0 ok 2008-Apr-29 23:09:18 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-29 23:09:18 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-29 23:09:18 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-29 23:09:18 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-29 23:09:18 LOG5 begin_task: Level: (4) ID = <10505> Status = 0 0 0 0 ok 2008-Apr-29 23:09:18 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-29 23:09:18 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-29 23:09:18 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-29 23:09:18 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-29 23:09:18 LOG5 end_task: Level: (4) ID = <10505> Status = 0 0 0 0 ok 2008-Apr-29 23:09:18 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-29 23:09:18 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-29 23:09:18 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-29 23:09:18 LOG5 begin_task: Level: (4) ID = <10506> Status = 0 0 0 0 ok 2008-Apr-29 23:09:18 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-29 23:09:18 LOG5 log_alfabeam: Parameters: 12.473916666666668 7.3475000000000001 13.267141 2008.3311835500797 -21.400078 2008-Apr-29 23:09:18 LOG4 log_alfabeam: ALFABEAM 0 12.473916666666669 7.347499999999993 2008-Apr-29 23:09:18 LOG4 log_alfabeam: ALFABEAM 1 12.473701437382481 7.444971109805485 2008-Apr-29 23:09:18 LOG4 log_alfabeam: ALFABEAM 2 12.468020815605167 7.380392608924708 2008-Apr-29 23:09:18 LOG4 log_alfabeam: ALFABEAM 3 12.468253628279191 7.282593065653702 2008-Apr-29 23:09:18 LOG4 log_alfabeam: ALFABEAM 4 12.474174256886696 7.249838840122025 2008-Apr-29 23:09:18 LOG4 log_alfabeam: ALFABEAM 5 12.479813423243373 7.315189569503711 2008-Apr-29 23:09:18 LOG4 log_alfabeam: ALFABEAM 6 12.479573519391909 7.412523619967243 2008-Apr-29 23:09:18 INFO2 take_spectra: Starting WAPP scan: 812000145 2008-Apr-29 23:09:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-29 23:09:19 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-29 23:09:19 LOG5 begin_task: Level: (5) ID = <10507> Status = 0 0 0 0 ok 2008-Apr-29 23:09:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-29 23:09:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11360.00 2008-Apr-29 23:09:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.165151 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-29 23:09:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.165151 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 23:09:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.165151 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 23:09:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.165151 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 23:09:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.165151 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 23:09:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.165151 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 23:09:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.165151 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 23:09:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.165151 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 23:09:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.165151 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 23:09:25 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-29 23:09:25 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-29 23:09:25 LOG5 end_task: Level: (5) ID = <10507> Status = 0 0 0 0 ok 2008-Apr-29 23:09:25 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-29 23:09:25 LOG5 end_task: Level: (4) ID = <10506> Status = 0 0 0 0 ok 2008-Apr-29 23:09:25 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-29 23:09:25 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-29 23:09:25 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-29 23:09:25 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-29 23:09:25 LOG5 begin_task: Level: (4) ID = <10508> Status = 0 0 0 0 ok 2008-Apr-29 23:09:26 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-29 23:09:26 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-29 23:09:26 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-29 23:09:26 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-29 23:09:26 LOG5 end_task: Level: (4) ID = <10508> Status = 0 0 0 0 ok 2008-Apr-29 23:09:26 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-29 23:09:26 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-29 23:09:26 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-29 23:09:26 LOG5 begin_task: Level: (4) ID = <10509> Status = 0 0 0 0 ok 2008-Apr-29 23:09:26 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-29 23:09:26 LOG5 log_alfabeam: Parameters: 12.473916666666668 7.3475000000000001 13.269091 2008.3311837718963 -21.400078 2008-Apr-29 23:09:26 LOG4 log_alfabeam: ALFABEAM 0 12.473916666666669 7.347499999999997 2008-Apr-29 23:09:26 LOG4 log_alfabeam: ALFABEAM 1 12.473709198481108 7.444974977782569 2008-Apr-29 23:09:26 LOG4 log_alfabeam: ALFABEAM 2 12.468023446044823 7.380496438430876 2008-Apr-29 23:09:26 LOG4 log_alfabeam: ALFABEAM 3 12.468248451639761 7.282693163613501 2008-Apr-29 23:09:26 LOG4 log_alfabeam: ALFABEAM 4 12.474166426494124 7.249834481573374 2008-Apr-29 23:09:26 LOG4 log_alfabeam: ALFABEAM 5 12.479810835855963 7.315084911574441 2008-Apr-29 23:09:26 LOG4 log_alfabeam: ALFABEAM 6 12.479578716204703 7.412423451446925 2008-Apr-29 23:09:26 INFO2 take_spectra: Starting WAPP scan: 812000146 2008-Apr-29 23:09:26 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-29 23:09:26 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-29 23:09:26 LOG5 begin_task: Level: (5) ID = <10510> Status = 0 0 0 0 ok 2008-Apr-29 23:09:26 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-29 23:09:26 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11367.00 2008-Apr-29 23:09:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.489 > 1.4)! 2008-Apr-29 23:09:31 LOG4 check_wapp_levels: WAPP-1 power levels: 1.291 1.036 1.226 1.473 2008-Apr-29 23:09:31 LOG4 check_wapp_levels: WAPP-2 power levels: 1.408 1.334 1.394 1.472 2008-Apr-29 23:09:31 LOG4 check_wapp_levels: WAPP-3 power levels: 1.324 1.348 1.444 1.218 2008-Apr-29 23:09:31 LOG4 check_wapp_levels: WAPP-4 power levels: 1.489 1.472 1.296 1.308 2008-Apr-29 23:09:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.165151 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-29 23:09:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.165151 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 23:09:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.165151 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 23:09:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.165151 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 23:09:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.165151 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 23:09:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.165151 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 23:09:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.165151 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 23:09:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.165151 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 23:09:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.165151 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 23:09:32 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-29 23:09:32 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-29 23:09:32 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-29 23:09:32 LOG5 end_task: Level: (5) ID = <10510> Status = 0 0 0 0 ok 2008-Apr-29 23:09:32 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-29 23:09:32 LOG5 end_task: Level: (4) ID = <10509> Status = 0 0 0 0 ok 2008-Apr-29 23:09:32 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-29 23:09:32 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-29 23:09:32 LOG5 finish_task: Level: (3) ID = <10500> Status = 0 0 0 0 ok 2008-Apr-29 23:09:32 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-29 23:09:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 23:09:32 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-29 23:09:32 LOG5 end_task: Level: (3) ID = <10500> Status = 0 0 0 0 ok 2008-Apr-29 23:09:33 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-29 23:09:33 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 47.49 and ZA = 15.90 2008-Apr-29 23:09:33 LOG3 track_source: Calling 'track_source AGESVC1B_p1_067 47.49 15.9036227373 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-29 23:09:33 START begin_task: Starting task 'sending tracking commands' 2008-Apr-29 23:09:33 LOG5 begin_task: Level: (3) ID = <10511> Status = 0 0 0 0 ok 2008-Apr-29 23:09:33 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p1_067} INFO {Slewing to source 'AGESVC1B_p1_067' ...} 2008-Apr-29 23:09:33 INFO1 track_source: Starting to track AGESVC1B_p1_067 2008-Apr-29 23:09:33 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p1_067" 2008-Apr-29 23:09:33 LOG3 vw_send: To DATATAKING: set ra 47.49 2008-Apr-29 23:09:33 LOG3 vw_send: To DATATAKING: set dec 15.9036227373 2008-Apr-29 23:09:33 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-29 23:09:33 LOG3 vw_send: To DATATAKING: pnt tr 47.49 15.9036227373 -CF 2008-Apr-29 23:09:33 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-29 23:09:33 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-29 23:09:33 LOG5 finish_task: Level: (3) ID = <10511> Status = 0 0 0 0 ok 2008-Apr-29 23:09:33 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-29 23:09:33 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-29 23:09:33 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-29 23:09:33 LOG5 end_task: Level: (3) ID = <10511> Status = 0 0 0 0 ok 2008-Apr-29 23:09:33 LOG1 fixed_driftmap: Parameters: HA = +00:47:00.1 Start = 13:16:27.2 LST = 13:16:15.7 diff = 11.4 secs 2008-Apr-29 23:09:33 INFO2 fixed_driftmap: Waiting 9.4 seconds for RA 12:29:27 2008-Apr-29 23:09:33 INFO2 lstwait: Waiting for 9.4 secs from LST 13:16:16 to LST 13:16:25 ... 2008-Apr-29 23:09:33 LOG4 send_obs_status: To obs_status: <1> TASKTIME 9.4079415872684109 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-29 23:09:33 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-29 23:09:33 LOG5 begin_task: Level: (3) ID = <10512> Status = 0 0 0 0 ok 2008-Apr-29 23:09:33 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p1_067" 2008-Apr-29 23:09:33 LOG4 got_cormsg: From DATATAKING: set ra 47.49 2008-Apr-29 23:09:33 LOG4 got_cormsg: From DATATAKING: set dec 15.9036227373 2008-Apr-29 23:09:33 LOG4 got_cormsg: From DATATAKING: vw% 47.49 2008-Apr-29 23:09:33 LOG4 got_cormsg: From DATATAKING: vw% 15.9036227373 2008-Apr-29 23:09:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 23:09:33 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-29 23:09:33 LOG4 got_cormsg: From DATATAKING: pnt tr 47.49 15.9036227373 -CF 2008-Apr-29 23:09:33 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-29 23:09:33 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-29 23:09:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-29 23:09:37 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.916 and 1.120 2008-Apr-29 23:09:42 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-29 23:09:42 LOG5 end_task: Level: (3) ID = <10512> Status = 0 0 0 0 ok 2008-Apr-29 23:09:42 LOG4 lstwait: Finished waiting, the gui caused difference: 0.5959006400004796 2008-Apr-29 23:09:42 INFO3 lstwait: Finished waiting 2008-Apr-29 23:09:42 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-29 23:09:42 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-29 23:09:42 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-29 23:09:42 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-29 23:09:42 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-29 23:09:42 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-29 23:09:42 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-29 23:09:42 LOG5 begin_task: Level: (3) ID = <10513> Status = 0 0 0 0 ok 2008-Apr-29 23:09:42 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-29 23:09:42 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-29 23:09:42 INFO2 take_spectra: Starting WAPP scan: 812000147 2008-Apr-29 23:09:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-29 23:09:43 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-29 23:09:43 LOG5 begin_task: Level: (4) ID = <10514> Status = 0 0 0 0 ok 2008-Apr-29 23:09:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-29 23:09:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11384.00 2008-Apr-29 23:09:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.165151 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-29 23:09:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.165151 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 23:09:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.165151 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 23:09:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.165151 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 23:09:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.165151 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 23:09:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.165151 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 23:09:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.165151 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 23:09:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.165151 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 23:09:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.165151 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-29 23:09:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.732 < 0.8)! 2008-Apr-29 23:09:55 LOG4 check_wapp_levels: WAPP-1 power levels: 0.949 0.732 0.914 1.087 2008-Apr-29 23:09:55 LOG4 check_wapp_levels: WAPP-2 power levels: 1.037 0.969 1.028 1.092 2008-Apr-29 23:09:55 LOG4 check_wapp_levels: WAPP-3 power levels: 0.965 0.979 1.061 0.918 2008-Apr-29 23:09:55 LOG4 check_wapp_levels: WAPP-4 power levels: 1.090 1.072 0.948 0.954 2008-Apr-29 23:09:57 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.914 and 1.092 2008-Apr-29 23:10:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.701 < 0.8)! 2008-Apr-29 23:10:03 LOG4 check_wapp_levels: WAPP-1 power levels: 0.953 0.701 0.914 1.087 2008-Apr-29 23:10:03 LOG4 check_wapp_levels: WAPP-2 power levels: 1.037 0.970 1.028 1.091 2008-Apr-29 23:10:03 LOG4 check_wapp_levels: WAPP-3 power levels: 0.966 0.980 1.061 0.919 2008-Apr-29 23:10:03 LOG4 check_wapp_levels: WAPP-4 power levels: 1.089 1.073 0.948 0.956 2008-Apr-29 23:10:05 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.915 and 1.091 2008-Apr-29 23:10:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.794 < 0.8)! 2008-Apr-29 23:10:07 LOG4 check_wapp_levels: WAPP-1 power levels: 0.950 0.794 0.914 1.088 2008-Apr-29 23:10:07 LOG4 check_wapp_levels: WAPP-2 power levels: 1.037 0.967 1.028 1.092 2008-Apr-29 23:10:07 LOG4 check_wapp_levels: WAPP-3 power levels: 0.965 0.980 1.064 0.920 2008-Apr-29 23:10:07 LOG4 check_wapp_levels: WAPP-4 power levels: 1.088 1.074 0.948 0.956 2008-Apr-29 23:10:09 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.916 and 1.092 2008-Apr-29 23:10:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.689 < 0.8)! 2008-Apr-29 23:10:22 LOG4 check_wapp_levels: WAPP-1 power levels: 0.954 0.689 0.915 1.088 2008-Apr-29 23:10:22 LOG4 check_wapp_levels: WAPP-2 power levels: 1.037 0.967 1.028 1.091 2008-Apr-29 23:10:22 LOG4 check_wapp_levels: WAPP-3 power levels: 0.970 0.986 1.057 0.918 2008-Apr-29 23:10:22 LOG4 check_wapp_levels: WAPP-4 power levels: 1.088 1.072 0.948 0.954 2008-Apr-29 23:10:24 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.915 and 1.092 2008-Apr-29 23:10:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.653 < 0.8)! 2008-Apr-29 23:10:44 LOG4 check_wapp_levels: WAPP-1 power levels: 0.954 0.653 0.916 1.091 2008-Apr-29 23:10:44 LOG4 check_wapp_levels: WAPP-2 power levels: 1.038 0.968 1.030 1.095 2008-Apr-29 23:10:44 LOG4 check_wapp_levels: WAPP-3 power levels: 0.984 1.000 1.061 0.918 2008-Apr-29 23:10:44 LOG4 check_wapp_levels: WAPP-4 power levels: 1.089 1.074 0.949 0.955 2008-Apr-29 23:10:46 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.917 and 1.166 2008-Apr-29 23:12:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.629 < 0.8)! 2008-Apr-29 23:12:19 LOG4 check_wapp_levels: WAPP-1 power levels: 0.955 0.629 0.908 1.086 2008-Apr-29 23:12:19 LOG4 check_wapp_levels: WAPP-2 power levels: 1.037 0.970 1.027 1.092 2008-Apr-29 23:12:19 LOG4 check_wapp_levels: WAPP-3 power levels: 0.959 0.976 1.057 0.917 2008-Apr-29 23:12:19 LOG4 check_wapp_levels: WAPP-4 power levels: 1.086 1.074 0.946 0.954 2008-Apr-29 23:12:21 INFO5 check_wapp_levels: WAPP power levels are between 0.768 and 1.093 (still bad) 2008-Apr-29 23:12:23 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.909 and 1.095 2008-Apr-29 23:12:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.699 < 0.8)! 2008-Apr-29 23:12:53 LOG4 check_wapp_levels: WAPP-1 power levels: 0.951 0.699 0.911 1.089 2008-Apr-29 23:12:53 LOG4 check_wapp_levels: WAPP-2 power levels: 1.039 0.969 1.029 1.093 2008-Apr-29 23:12:53 LOG4 check_wapp_levels: WAPP-3 power levels: 0.967 0.987 1.056 0.916 2008-Apr-29 23:12:53 LOG4 check_wapp_levels: WAPP-4 power levels: 1.089 1.073 0.949 0.954 2008-Apr-29 23:12:55 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.895 and 1.092 2008-Apr-29 23:12:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.772 < 0.8)! 2008-Apr-29 23:12:59 LOG4 check_wapp_levels: WAPP-1 power levels: 0.947 0.772 0.913 1.090 2008-Apr-29 23:12:59 LOG4 check_wapp_levels: WAPP-2 power levels: 1.036 0.968 1.029 1.092 2008-Apr-29 23:12:59 LOG4 check_wapp_levels: WAPP-3 power levels: 0.966 0.984 1.057 0.915 2008-Apr-29 23:12:59 LOG4 check_wapp_levels: WAPP-4 power levels: 1.087 1.074 0.947 0.954 2008-Apr-29 23:13:01 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.915 and 1.092 2008-Apr-29 23:13:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.778 < 0.8)! 2008-Apr-29 23:13:26 LOG4 check_wapp_levels: WAPP-1 power levels: 0.957 0.778 0.914 1.085 2008-Apr-29 23:13:26 LOG4 check_wapp_levels: WAPP-2 power levels: 1.036 0.968 1.032 1.095 2008-Apr-29 23:13:26 LOG4 check_wapp_levels: WAPP-3 power levels: 0.965 0.981 1.057 0.918 2008-Apr-29 23:13:26 LOG4 check_wapp_levels: WAPP-4 power levels: 1.088 1.074 0.948 0.954 2008-Apr-29 23:13:28 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.914 and 1.096 2008-Apr-29 23:13:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.675 < 0.8)! 2008-Apr-29 23:13:34 LOG4 check_wapp_levels: WAPP-1 power levels: 0.951 0.675 0.915 1.089 2008-Apr-29 23:13:34 LOG4 check_wapp_levels: WAPP-2 power levels: 1.037 0.970 1.033 1.096 2008-Apr-29 23:13:34 LOG4 check_wapp_levels: WAPP-3 power levels: 0.966 0.981 1.062 0.918 2008-Apr-29 23:13:34 LOG4 check_wapp_levels: WAPP-4 power levels: 1.089 1.075 0.947 0.955 2008-Apr-29 23:13:36 INFO5 check_wapp_levels: WAPP power levels are between 0.585 and 1.096 (still bad) 2008-Apr-29 23:13:38 INFO5 check_wapp_levels: WAPP power levels are between 0.751 and 1.095 (still bad) 2008-Apr-29 23:13:40 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.915 and 1.095 2008-Apr-29 23:13:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.781 < 0.8)! 2008-Apr-29 23:13:46 LOG4 check_wapp_levels: WAPP-1 power levels: 0.951 0.781 0.913 1.087 2008-Apr-29 23:13:46 LOG4 check_wapp_levels: WAPP-2 power levels: 1.039 0.970 1.032 1.094 2008-Apr-29 23:13:46 LOG4 check_wapp_levels: WAPP-3 power levels: 0.966 0.984 1.059 0.919 2008-Apr-29 23:13:46 LOG4 check_wapp_levels: WAPP-4 power levels: 1.090 1.074 0.948 0.955 2008-Apr-29 23:13:48 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.887 and 1.094 2008-Apr-29 23:14:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.667 < 0.8)! 2008-Apr-29 23:14:30 LOG4 check_wapp_levels: WAPP-1 power levels: 0.950 0.667 0.914 1.090 2008-Apr-29 23:14:30 LOG4 check_wapp_levels: WAPP-2 power levels: 1.037 0.970 1.031 1.096 2008-Apr-29 23:14:30 LOG4 check_wapp_levels: WAPP-3 power levels: 0.968 0.985 1.061 0.921 2008-Apr-29 23:14:30 LOG4 check_wapp_levels: WAPP-4 power levels: 1.092 1.075 0.950 0.956 2008-Apr-29 23:14:32 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.913 and 1.098 2008-Apr-29 23:14:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.628 < 0.8)! 2008-Apr-29 23:14:35 LOG4 check_wapp_levels: WAPP-1 power levels: 0.954 0.628 0.912 1.089 2008-Apr-29 23:14:35 LOG4 check_wapp_levels: WAPP-2 power levels: 1.039 0.971 1.031 1.095 2008-Apr-29 23:14:35 LOG4 check_wapp_levels: WAPP-3 power levels: 0.968 0.986 1.060 0.921 2008-Apr-29 23:14:35 LOG4 check_wapp_levels: WAPP-4 power levels: 1.092 1.075 0.949 0.956 2008-Apr-29 23:14:37 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.913 and 1.094 2008-Apr-29 23:18:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.790 < 0.8)! 2008-Apr-29 23:18:45 LOG4 check_wapp_levels: WAPP-1 power levels: 0.986 0.790 0.932 1.101 2008-Apr-29 23:18:45 LOG4 check_wapp_levels: WAPP-2 power levels: 1.046 0.974 1.034 1.096 2008-Apr-29 23:18:45 LOG4 check_wapp_levels: WAPP-3 power levels: 0.971 0.986 1.063 0.919 2008-Apr-29 23:18:45 LOG4 check_wapp_levels: WAPP-4 power levels: 1.093 1.076 0.950 0.957 2008-Apr-29 23:18:47 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.919 and 1.098 2008-Apr-29 23:18:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.613 < 0.8)! 2008-Apr-29 23:18:49 LOG4 check_wapp_levels: WAPP-1 power levels: 0.974 0.613 0.927 1.095 2008-Apr-29 23:18:49 LOG4 check_wapp_levels: WAPP-2 power levels: 1.047 0.977 1.033 1.096 2008-Apr-29 23:18:49 LOG4 check_wapp_levels: WAPP-3 power levels: 0.970 0.985 1.064 0.918 2008-Apr-29 23:18:49 LOG4 check_wapp_levels: WAPP-4 power levels: 1.091 1.075 0.950 0.956 2008-Apr-29 23:18:51 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.920 and 1.095 2008-Apr-29 23:18:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.713 < 0.8)! 2008-Apr-29 23:18:54 LOG4 check_wapp_levels: WAPP-1 power levels: 0.962 0.713 0.921 1.088 2008-Apr-29 23:18:54 LOG4 check_wapp_levels: WAPP-2 power levels: 1.056 0.983 1.032 1.096 2008-Apr-29 23:18:54 LOG4 check_wapp_levels: WAPP-3 power levels: 0.969 0.986 1.063 0.919 2008-Apr-29 23:18:54 LOG4 check_wapp_levels: WAPP-4 power levels: 1.092 1.075 0.951 0.957 2008-Apr-29 23:18:56 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.919 and 1.096 2008-Apr-29 23:19:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.777 < 0.8)! 2008-Apr-29 23:19:36 LOG4 check_wapp_levels: WAPP-1 power levels: 0.968 0.777 0.926 1.091 2008-Apr-29 23:19:36 LOG4 check_wapp_levels: WAPP-2 power levels: 1.045 0.975 1.034 1.095 2008-Apr-29 23:19:36 LOG4 check_wapp_levels: WAPP-3 power levels: 0.979 0.987 1.065 0.921 2008-Apr-29 23:19:36 LOG4 check_wapp_levels: WAPP-4 power levels: 1.106 1.088 0.962 0.968 2008-Apr-29 23:19:38 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.919 and 1.106 2008-Apr-29 23:19:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.743 < 0.8)! 2008-Apr-29 23:19:44 LOG4 check_wapp_levels: WAPP-1 power levels: 0.964 0.743 0.926 1.091 2008-Apr-29 23:19:44 LOG4 check_wapp_levels: WAPP-2 power levels: 1.044 0.973 1.034 1.097 2008-Apr-29 23:19:44 LOG4 check_wapp_levels: WAPP-3 power levels: 0.977 0.989 1.066 0.920 2008-Apr-29 23:19:44 LOG4 check_wapp_levels: WAPP-4 power levels: 1.104 1.085 0.962 0.965 2008-Apr-29 23:19:46 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.920 and 1.104 2008-Apr-29 23:19:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.704 < 0.8)! 2008-Apr-29 23:19:50 LOG4 check_wapp_levels: WAPP-1 power levels: 0.962 0.704 0.930 1.097 2008-Apr-29 23:19:50 LOG4 check_wapp_levels: WAPP-2 power levels: 1.043 0.973 1.033 1.097 2008-Apr-29 23:19:50 LOG4 check_wapp_levels: WAPP-3 power levels: 0.977 0.988 1.064 0.920 2008-Apr-29 23:19:50 LOG4 check_wapp_levels: WAPP-4 power levels: 1.103 1.085 0.959 0.964 2008-Apr-29 23:19:52 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.904 and 1.104 2008-Apr-29 23:20:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.784 < 0.8)! 2008-Apr-29 23:20:15 LOG4 check_wapp_levels: WAPP-1 power levels: 0.961 0.784 0.933 1.104 2008-Apr-29 23:20:15 LOG4 check_wapp_levels: WAPP-2 power levels: 1.044 0.972 1.034 1.096 2008-Apr-29 23:20:15 LOG4 check_wapp_levels: WAPP-3 power levels: 0.974 0.990 1.063 0.921 2008-Apr-29 23:20:15 LOG4 check_wapp_levels: WAPP-4 power levels: 1.096 1.075 0.952 0.957 2008-Apr-29 23:20:17 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.922 and 1.105 2008-Apr-29 23:20:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.782 < 0.8)! 2008-Apr-29 23:20:25 LOG4 check_wapp_levels: WAPP-1 power levels: 0.954 0.782 0.939 1.115 2008-Apr-29 23:20:25 LOG4 check_wapp_levels: WAPP-2 power levels: 1.041 0.971 1.033 1.097 2008-Apr-29 23:20:25 LOG4 check_wapp_levels: WAPP-3 power levels: 0.972 0.988 1.062 0.921 2008-Apr-29 23:20:25 LOG4 check_wapp_levels: WAPP-4 power levels: 1.095 1.076 0.953 0.957 2008-Apr-29 23:20:27 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.922 and 1.110 2008-Apr-29 23:22:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.715 < 0.8)! 2008-Apr-29 23:22:14 LOG4 check_wapp_levels: WAPP-1 power levels: 0.958 0.715 0.915 1.093 2008-Apr-29 23:22:14 LOG4 check_wapp_levels: WAPP-2 power levels: 1.042 0.968 1.038 1.100 2008-Apr-29 23:22:14 LOG4 check_wapp_levels: WAPP-3 power levels: 0.967 0.985 1.065 0.920 2008-Apr-29 23:22:14 LOG4 check_wapp_levels: WAPP-4 power levels: 1.094 1.074 0.951 0.956 2008-Apr-29 23:22:16 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.917 and 1.103 2008-Apr-29 23:22:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.799 < 0.8)! 2008-Apr-29 23:22:48 LOG4 check_wapp_levels: WAPP-1 power levels: 0.952 0.799 0.914 1.090 2008-Apr-29 23:22:48 LOG4 check_wapp_levels: WAPP-2 power levels: 1.044 0.968 1.038 1.100 2008-Apr-29 23:22:48 LOG4 check_wapp_levels: WAPP-3 power levels: 0.965 0.982 1.062 0.918 2008-Apr-29 23:22:48 LOG4 check_wapp_levels: WAPP-4 power levels: 1.094 1.075 0.952 0.956 2008-Apr-29 23:22:50 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.801 and 1.098 2008-Apr-29 23:22:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.736 < 0.8)! 2008-Apr-29 23:22:52 LOG4 check_wapp_levels: WAPP-1 power levels: 0.955 0.736 0.911 1.090 2008-Apr-29 23:22:52 LOG4 check_wapp_levels: WAPP-2 power levels: 1.043 0.968 1.034 1.098 2008-Apr-29 23:22:52 LOG4 check_wapp_levels: WAPP-3 power levels: 0.965 0.981 1.061 0.917 2008-Apr-29 23:22:52 LOG4 check_wapp_levels: WAPP-4 power levels: 1.091 1.074 0.951 0.955 2008-Apr-29 23:22:54 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.897 and 1.097 2008-Apr-29 23:23:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.769 < 0.8)! 2008-Apr-29 23:23:23 LOG4 check_wapp_levels: WAPP-1 power levels: 0.951 0.769 0.913 1.090 2008-Apr-29 23:23:23 LOG4 check_wapp_levels: WAPP-2 power levels: 1.043 0.971 1.034 1.095 2008-Apr-29 23:23:23 LOG4 check_wapp_levels: WAPP-3 power levels: 0.965 0.982 1.062 0.917 2008-Apr-29 23:23:23 LOG4 check_wapp_levels: WAPP-4 power levels: 1.091 1.075 0.950 0.956 2008-Apr-29 23:23:25 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.917 and 1.096 2008-Apr-29 23:23:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.745 < 0.8)! 2008-Apr-29 23:23:37 LOG4 check_wapp_levels: WAPP-1 power levels: 0.951 0.745 0.915 1.091 2008-Apr-29 23:23:37 LOG4 check_wapp_levels: WAPP-2 power levels: 1.041 0.969 1.035 1.095 2008-Apr-29 23:23:37 LOG4 check_wapp_levels: WAPP-3 power levels: 0.967 0.983 1.063 0.918 2008-Apr-29 23:23:37 LOG4 check_wapp_levels: WAPP-4 power levels: 1.092 1.074 0.950 0.957 2008-Apr-29 23:23:39 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.916 and 1.096 2008-Apr-29 23:24:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.756 < 0.8)! 2008-Apr-29 23:24:23 LOG4 check_wapp_levels: WAPP-1 power levels: 0.953 0.756 0.918 1.090 2008-Apr-29 23:24:23 LOG4 check_wapp_levels: WAPP-2 power levels: 1.041 0.969 1.037 1.096 2008-Apr-29 23:24:23 LOG4 check_wapp_levels: WAPP-3 power levels: 0.969 0.984 1.064 0.919 2008-Apr-29 23:24:23 LOG4 check_wapp_levels: WAPP-4 power levels: 1.094 1.075 0.952 0.957 2008-Apr-29 23:24:25 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.921 and 1.100 2008-Apr-29 23:24:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.665 < 0.8)! 2008-Apr-29 23:24:28 LOG4 check_wapp_levels: WAPP-1 power levels: 0.952 0.665 0.919 1.088 2008-Apr-29 23:24:28 LOG4 check_wapp_levels: WAPP-2 power levels: 1.042 0.970 1.038 1.097 2008-Apr-29 23:24:28 LOG4 check_wapp_levels: WAPP-3 power levels: 0.968 0.984 1.069 0.920 2008-Apr-29 23:24:28 LOG4 check_wapp_levels: WAPP-4 power levels: 1.095 1.076 0.953 0.957 2008-Apr-29 23:24:30 INFO5 check_wapp_levels: WAPP power levels are between 0.591 and 1.096 (still bad) 2008-Apr-29 23:24:32 INFO5 check_wapp_levels: WAPP power levels are between 0.776 and 1.097 (still bad) 2008-Apr-29 23:24:34 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.919 and 1.113 2008-Apr-29 23:26:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.693 < 0.8)! 2008-Apr-29 23:26:05 LOG4 check_wapp_levels: WAPP-1 power levels: 0.950 0.693 0.916 1.093 2008-Apr-29 23:26:05 LOG4 check_wapp_levels: WAPP-2 power levels: 1.042 0.971 1.035 1.096 2008-Apr-29 23:26:05 LOG4 check_wapp_levels: WAPP-3 power levels: 0.971 0.989 1.068 0.925 2008-Apr-29 23:26:05 LOG4 check_wapp_levels: WAPP-4 power levels: 1.096 1.076 0.954 0.958 2008-Apr-29 23:26:07 INFO5 check_wapp_levels: WAPP power levels are between 0.628 and 1.097 (still bad) 2008-Apr-29 23:26:09 INFO5 check_wapp_levels: WAPP power levels are between 0.790 and 1.097 (still bad) 2008-Apr-29 23:26:11 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.846 and 1.096 2008-Apr-29 23:26:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.737 < 0.8)! 2008-Apr-29 23:26:17 LOG4 check_wapp_levels: WAPP-1 power levels: 0.950 0.737 0.911 1.089 2008-Apr-29 23:26:17 LOG4 check_wapp_levels: WAPP-2 power levels: 1.039 0.970 1.036 1.096 2008-Apr-29 23:26:17 LOG4 check_wapp_levels: WAPP-3 power levels: 0.973 0.990 1.078 0.935 2008-Apr-29 23:26:17 LOG4 check_wapp_levels: WAPP-4 power levels: 1.096 1.072 0.953 0.956 2008-Apr-29 23:26:19 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.914 and 1.097 2008-Apr-29 23:26:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.638 < 0.8)! 2008-Apr-29 23:26:45 LOG4 check_wapp_levels: WAPP-1 power levels: 0.967 0.638 0.913 1.090 2008-Apr-29 23:26:45 LOG4 check_wapp_levels: WAPP-2 power levels: 1.047 0.975 1.034 1.096 2008-Apr-29 23:26:45 LOG4 check_wapp_levels: WAPP-3 power levels: 0.975 0.991 1.063 0.921 2008-Apr-29 23:26:45 LOG4 check_wapp_levels: WAPP-4 power levels: 1.100 1.077 0.957 0.961 2008-Apr-29 23:26:47 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.912 and 1.102 2008-Apr-29 23:27:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.638 < 0.8)! 2008-Apr-29 23:27:01 LOG4 check_wapp_levels: WAPP-1 power levels: 0.949 0.638 0.912 1.093 2008-Apr-29 23:27:01 LOG4 check_wapp_levels: WAPP-2 power levels: 1.064 0.987 1.038 1.097 2008-Apr-29 23:27:01 LOG4 check_wapp_levels: WAPP-3 power levels: 0.973 0.991 1.064 0.922 2008-Apr-29 23:27:01 LOG4 check_wapp_levels: WAPP-4 power levels: 1.100 1.076 0.956 0.960 2008-Apr-29 23:27:03 INFO5 check_wapp_levels: WAPP power levels are between 0.747 and 1.100 (still bad) 2008-Apr-29 23:27:05 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.812 and 1.099 2008-Apr-29 23:27:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.700 < 0.8)! 2008-Apr-29 23:27:18 LOG4 check_wapp_levels: WAPP-1 power levels: 0.952 0.700 0.914 1.097 2008-Apr-29 23:27:18 LOG4 check_wapp_levels: WAPP-2 power levels: 1.048 0.975 1.037 1.097 2008-Apr-29 23:27:18 LOG4 check_wapp_levels: WAPP-3 power levels: 0.973 0.992 1.063 0.923 2008-Apr-29 23:27:18 LOG4 check_wapp_levels: WAPP-4 power levels: 1.099 1.076 0.955 0.959 2008-Apr-29 23:27:20 INFO5 check_wapp_levels: WAPP power levels are between 0.678 and 1.098 (still bad) 2008-Apr-29 23:27:22 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.802 and 1.098 2008-Apr-29 23:27:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.754 < 0.8)! 2008-Apr-29 23:27:24 LOG4 check_wapp_levels: WAPP-1 power levels: 0.950 0.754 0.913 1.093 2008-Apr-29 23:27:24 LOG4 check_wapp_levels: WAPP-2 power levels: 1.046 0.973 1.037 1.097 2008-Apr-29 23:27:24 LOG4 check_wapp_levels: WAPP-3 power levels: 0.973 0.993 1.064 0.923 2008-Apr-29 23:27:24 LOG4 check_wapp_levels: WAPP-4 power levels: 1.098 1.076 0.954 0.958 2008-Apr-29 23:27:26 INFO5 check_wapp_levels: WAPP power levels are between 0.773 and 1.098 (still bad) 2008-Apr-29 23:27:28 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.911 and 1.098 2008-Apr-29 23:28:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.613 < 0.8)! 2008-Apr-29 23:28:00 LOG4 check_wapp_levels: WAPP-1 power levels: 0.947 0.613 0.909 1.089 2008-Apr-29 23:28:00 LOG4 check_wapp_levels: WAPP-2 power levels: 1.044 0.971 1.036 1.098 2008-Apr-29 23:28:00 LOG4 check_wapp_levels: WAPP-3 power levels: 0.973 0.990 1.067 0.925 2008-Apr-29 23:28:00 LOG4 check_wapp_levels: WAPP-4 power levels: 1.098 1.076 0.955 0.958 2008-Apr-29 23:28:02 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.829 and 1.098 2008-Apr-29 23:28:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.629 < 0.8)! 2008-Apr-29 23:28:08 LOG4 check_wapp_levels: WAPP-1 power levels: 0.948 0.629 0.909 1.091 2008-Apr-29 23:28:08 LOG4 check_wapp_levels: WAPP-2 power levels: 1.046 0.973 1.036 1.097 2008-Apr-29 23:28:08 LOG4 check_wapp_levels: WAPP-3 power levels: 0.973 0.990 1.067 0.926 2008-Apr-29 23:28:08 LOG4 check_wapp_levels: WAPP-4 power levels: 1.099 1.077 0.955 0.958 2008-Apr-29 23:28:10 INFO5 check_wapp_levels: WAPP power levels are between 0.669 and 1.097 (still bad) 2008-Apr-29 23:28:12 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.909 and 1.097 2008-Apr-29 23:28:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.579 < 0.8)! 2008-Apr-29 23:28:14 LOG4 check_wapp_levels: WAPP-1 power levels: 0.951 0.579 0.912 1.094 2008-Apr-29 23:28:14 LOG4 check_wapp_levels: WAPP-2 power levels: 1.043 0.972 1.036 1.098 2008-Apr-29 23:28:14 LOG4 check_wapp_levels: WAPP-3 power levels: 0.973 0.990 1.064 0.924 2008-Apr-29 23:28:14 LOG4 check_wapp_levels: WAPP-4 power levels: 1.097 1.075 0.954 0.957 2008-Apr-29 23:28:16 INFO5 check_wapp_levels: WAPP power levels are between 0.710 and 1.097 (still bad) 2008-Apr-29 23:28:18 INFO5 check_wapp_levels: WAPP power levels are between 0.736 and 1.098 (still bad) 2008-Apr-29 23:28:20 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.914 and 1.097 2008-Apr-29 23:28:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.799 < 0.8)! 2008-Apr-29 23:28:28 LOG4 check_wapp_levels: WAPP-1 power levels: 0.949 0.799 0.909 1.092 2008-Apr-29 23:28:28 LOG4 check_wapp_levels: WAPP-2 power levels: 1.042 0.970 1.036 1.097 2008-Apr-29 23:28:28 LOG4 check_wapp_levels: WAPP-3 power levels: 0.973 0.990 1.064 0.922 2008-Apr-29 23:28:28 LOG4 check_wapp_levels: WAPP-4 power levels: 1.096 1.078 0.956 0.959 2008-Apr-29 23:28:30 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.807 and 1.097 2008-Apr-29 23:28:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.695 < 0.8)! 2008-Apr-29 23:28:49 LOG4 check_wapp_levels: WAPP-1 power levels: 0.948 0.695 0.905 1.089 2008-Apr-29 23:28:49 LOG4 check_wapp_levels: WAPP-2 power levels: 1.041 0.970 1.041 1.101 2008-Apr-29 23:28:49 LOG4 check_wapp_levels: WAPP-3 power levels: 0.970 0.989 1.062 0.923 2008-Apr-29 23:28:49 LOG4 check_wapp_levels: WAPP-4 power levels: 1.096 1.075 0.954 0.956 2008-Apr-29 23:28:51 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.892 and 1.101 2008-Apr-29 23:29:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.758 < 0.8)! 2008-Apr-29 23:29:21 LOG4 check_wapp_levels: WAPP-1 power levels: 0.953 0.758 0.911 1.090 2008-Apr-29 23:29:21 LOG4 check_wapp_levels: WAPP-2 power levels: 1.043 0.970 1.036 1.097 2008-Apr-29 23:29:21 LOG4 check_wapp_levels: WAPP-3 power levels: 0.970 0.988 1.067 0.927 2008-Apr-29 23:29:21 LOG4 check_wapp_levels: WAPP-4 power levels: 1.097 1.075 0.955 0.957 2008-Apr-29 23:29:23 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.890 and 1.097 2008-Apr-29 23:29:44 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-29 23:29:44 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-29 23:29:44 LOG5 end_task: Level: (4) ID = <10514> Status = 0 0 0 0 ok 2008-Apr-29 23:29:44 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-29 23:29:44 LOG5 end_task: Level: (3) ID = <10513> Status = 0 0 0 0 ok 2008-Apr-29 23:29:44 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-29 23:29:44 LOG5 finish_task: Level: (2) ID = <10481> Status = 0 0 0 0 ok 2008-Apr-29 23:29:44 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-29 23:29:44 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-29 23:29:44 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-29 23:29:44 LOG5 end_task: Level: (2) ID = <10481> Status = 0 0 0 0 ok 2008-Apr-29 23:29:44 NOTE run_command_file: DONE with command file processing 2008-Apr-29 23:29:44 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2008-Apr-29 23:29:44 STOP finish_task: Finishing task 'running command file '080429_obs.cmd'' 2008-Apr-29 23:29:44 LOG5 finish_task: Level: (1) ID = <10090> Status = 0 0 0 0 ok 2008-Apr-29 23:29:44 DONE finish_task: DONE finished running: command file '080429_obs.cmd' 2008-Apr-29 23:29:44 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-29 23:29:44 END end_task: Finishing task 'running command file '080429_obs.cmd'' with status 'OK' 2008-Apr-29 23:29:44 LOG5 end_task: Level: (1) ID = <10090> Status = 0 0 0 0 ok 2008-Apr-29 23:30:57 INFO1 CIMA-run_command_file: Transferring command file 'command_galfacurpos.cmd ' to executive ... 2008-Apr-29 23:30:57 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 7 {LOAD togs_ages.conf} 2008-Apr-29 23:30:57 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 8 {TRACKCURPOS} 2008-Apr-29 23:30:57 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 9 {ALFAANGLE 19} 2008-Apr-29 23:30:57 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 13 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2008-Apr-29 23:30:57 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-Apr-29 23:30:57 LOG4 exec_msg: From OBSERVER: run_command_file command_galfacurpos.cmd 1 1 4 2008-Apr-29 23:30:57 LOG4 run_command_file: Calling 'run_command_file command_galfacurpos.cmd 1 1 4' 2008-Apr-29 23:30:57 BEGIN begin_task: Starting task 'running command file 'command_galfacurpos.cmd'' 2008-Apr-29 23:30:58 LOG5 begin_task: Level: (1) ID = <10515> Status = 0 0 0 0 ok 2008-Apr-29 23:30:58 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfacurpos.cmd' ...} 2008-Apr-29 23:30:58 NOTE run_command_file: Starting execution of command file 'command_galfacurpos.cmd' from line 1 2008-Apr-29 23:30:58 COMMAND run_command_line: EXECUTING command 7: 'LOAD togs_ages.conf' 2008-Apr-29 23:30:58 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2008-Apr-29 23:30:58 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-29 23:30:58 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2008-Apr-29 23:30:58 NOTE CIMA-load_config_file: Loading configuration file 'togs_ages.conf' 2008-Apr-29 23:30:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Apr-29 23:30:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Apr-29 23:30:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Apr-29 23:30:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Apr-29 23:30:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Apr-29 23:30:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2008-Apr-29 23:30:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Apr-29 23:30:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1381.2" 2008-Apr-29 23:30:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1381.2" 2008-Apr-29 23:30:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1381.2" 2008-Apr-29 23:30:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1381.2" 2008-Apr-29 23:30:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1381.2" 2008-Apr-29 23:30:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1381.2" 2008-Apr-29 23:30:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1381.2" 2008-Apr-29 23:30:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1381.2" 2008-Apr-29 23:30:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1381.2" 2008-Apr-29 23:30:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Apr-29 23:30:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Apr-29 23:30:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Apr-29 23:30:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Apr-29 23:30:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Apr-29 23:30:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Apr-29 23:30:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Apr-29 23:30:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Apr-29 23:30:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Apr-29 23:30:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Apr-29 23:30:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Apr-29 23:30:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Apr-29 23:30:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Apr-29 23:30:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2008-Apr-29 23:30:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Apr-29 23:30:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Apr-29 23:30:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Apr-29 23:30:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Apr-29 23:30:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Apr-29 23:30:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Apr-29 23:30:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Apr-29 23:30:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Apr-29 23:30:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Apr-29 23:30:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1631.200000" 2008-Apr-29 23:30:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Apr-29 23:30:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Apr-29 23:30:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Apr-29 23:30:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Apr-29 23:30:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Apr-29 23:30:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Apr-29 23:30:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Apr-29 23:30:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Apr-29 23:30:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Apr-29 23:30:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Apr-29 23:30:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Apr-29 23:30:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Apr-29 23:30:59 LOG4