2008-Apr-28 18:30:50 BEGIN executive: CIMA executive starting ... 2008-Apr-28 18:30:50 NOTE executive: STARTING NEW CIMA SESSION 2008-Apr-28 18:30:50 INFO1 executive: Using CIMA version 2.3.xx 'unusable' from 2008-04-26 12:28 2008-Apr-28 18:30:50 INFO4 executive: This is an ON-LINE session 2008-Apr-28 18:30:50 INFO4 executive: This is a REMOTE session 2008-Apr-28 18:30:50 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2008-Apr-28 18:30:50 INFO1 executive: CIMA session for project 'a2048' in 'line' mode for 'Steve Schnei' 2008-Apr-28 18:30:50 INFO2 executive: Logging to '/share/obs4/usr/a2048/a2048.cimalog_20080428' 2008-Apr-28 18:30:51 LOG2 log_preferences: Currently applied preferences: 2008-Apr-28 18:30:51 LOG2 log_preferences: prefs(dailylog) = daily 2008-Apr-28 18:30:51 LOG2 log_preferences: prefs(offlinelog) = skip 2008-Apr-28 18:30:51 LOG2 log_preferences: prefs(datawindow) = ignore 2008-Apr-28 18:30:51 LOG2 log_preferences: prefs(limitwarning) = enabled 2008-Apr-28 18:30:51 LOG2 log_preferences: prefs(wappfailure) = abort 2008-Apr-28 18:30:51 LOG2 log_preferences: prefs(helpstyle) = stay-open 2008-Apr-28 18:30:51 LOG2 log_preferences: prefs(logcolours) = full 2008-Apr-28 18:30:51 LOG2 log_preferences: prefs(displaylevel) = INFO3 2008-Apr-28 18:30:51 LOG2 log_preferences: prefs(loglevel) = LOG5 2008-Apr-28 18:30:51 LOG2 log_preferences: prefs(displayformat) = short 2008-Apr-28 18:30:51 LOG2 log_preferences: prefs(logformat) = new 2008-Apr-28 18:30:51 LOG2 log_preferences: prefs(fontsize) = 4 2008-Apr-28 18:30:51 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2008-Apr-28 18:30:51 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2048 2008-Apr-28 18:30:51 ALERT executive: CIMA executive ready 2008-Apr-28 18:30:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:30:53 LOG4 got_cormsg: From DATATAKING: setup 2008-Apr-28 18:30:54 NOTE frontend: CIMA frontend ready 2008-Apr-28 18:30:59 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0xd 2008-Apr-28 18:30:59 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0xd' 2008-Apr-28 18:30:59 LOG4 got_cormsg: From DATATAKING: vw% io 2008-Apr-28 18:30:59 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2008-Apr-28 18:30:59 LOG4 got_cormsg: From DATATAKING: 2008-Apr-28 18:30:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:30:59 LOG4 got_cormsg: From DATATAKING: tape stat 2008-Apr-28 18:30:59 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2008-Apr-28 18:30:59 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2008-Apr-28 18:30:59 LOG4 got_cormsg: From DATATAKING: vw% connectall 2008-Apr-28 18:30:59 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2008-Apr-28 18:30:59 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2008-Apr-28 18:30:59 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2008-Apr-28 18:30:59 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2008-Apr-28 18:30:59 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2008-Apr-28 18:31:00 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2008-Apr-28 18:31:00 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2008-Apr-28 18:31:00 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2008-Apr-28 18:31:00 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2048 2008-Apr-28 18:31:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:31:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:31:33 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2008-Apr-28 18:31:33 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2008-Apr-28 18:31:33 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2008-Apr-28 18:31:33 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2008-Apr-28 18:31:33 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Apr-28 18:31:33 NOTE select_receiver: Starting to select receiver ALFA 2008-Apr-28 18:31:33 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Apr-28 18:31:33 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Apr-28 18:31:33 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Apr-28 18:31:34 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Apr-28 18:31:34 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Apr-28 18:31:34 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Apr-28 18:31:34 DONE finish_task: DONE finished selecting: receiver ALFA 2008-Apr-28 18:31:34 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-28 18:31:34 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Apr-28 18:31:34 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Apr-28 18:31:34 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Apr-28 18:31:34 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Apr-28 18:31:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:31:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:31:48 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2008-Apr-28 18:31:48 LOG4 exec_msg: From OBSERVER: restart_wapp 2008-Apr-28 18:31:48 LOG5 restart_wapp: Calling 'restart_wapp' 2008-Apr-28 18:31:48 BEGIN begin_task: Starting task 'restarting the WAPPs' 2008-Apr-28 18:31:48 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Apr-28 18:31:48 NOTE restart_wapp: Restarting all WAPPs 2008-Apr-28 18:31:48 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2008-Apr-28 18:31:48 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2008-Apr-28 18:31:48 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Apr-28 18:31:48 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Apr-28 18:31:51 ALERT WAPP=3-wappcon: WAPP3 restarting 2008-Apr-28 18:31:51 ALERT WAPP=1-wappcon: WAPP1 restarting 2008-Apr-28 18:31:51 ALERT WAPP=2-wappcon: WAPP2 restarting 2008-Apr-28 18:31:51 ALERT WAPP=4-wappcon: WAPP4 restarting 2008-Apr-28 18:32:43 INFO1 CIMA-run_command_file: Transferring command file 'command_galfasrc.cmd ' to executive ... 2008-Apr-28 18:32:43 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 5 {LOAD togs_ages.conf} 2008-Apr-28 18:32:43 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 6 {CATALOG togs_ages.cat} 2008-Apr-28 18:32:43 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {GOTO galfasrc} 2008-Apr-28 18:32:43 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {ALFAANGLE 19} 2008-Apr-28 18:32:43 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {WAITTRACK} 2008-Apr-28 18:32:43 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 13 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2008-Apr-28 18:32:43 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-Apr-28 18:32:43 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc.cmd 1 1 6 2008-Apr-28 18:32:43 LOG4 run_command_file: Calling 'run_command_file command_galfasrc.cmd 1 1 6' 2008-Apr-28 18:32:43 BEGIN begin_task: Starting task 'running command file 'command_galfasrc.cmd'' 2008-Apr-28 18:32:43 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Apr-28 18:32:43 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc.cmd' ...} 2008-Apr-28 18:32:43 NOTE run_command_file: Starting execution of command file 'command_galfasrc.cmd' from line 1 2008-Apr-28 18:32:43 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_ages.conf' 2008-Apr-28 18:32:43 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2008-Apr-28 18:32:44 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-28 18:32:44 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2008-Apr-28 18:32:44 NOTE CIMA-load_config_file: Loading configuration file 'togs_ages.conf' 2008-Apr-28 18:32:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Apr-28 18:32:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Apr-28 18:32:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Apr-28 18:32:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Apr-28 18:32:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Apr-28 18:32:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2008-Apr-28 18:32:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Apr-28 18:32:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1381.2" 2008-Apr-28 18:32:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1381.2" 2008-Apr-28 18:32:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1381.2" 2008-Apr-28 18:32:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1381.2" 2008-Apr-28 18:32:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1381.2" 2008-Apr-28 18:32:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1381.2" 2008-Apr-28 18:32:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1381.2" 2008-Apr-28 18:32:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1381.2" 2008-Apr-28 18:32:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1381.2" 2008-Apr-28 18:32:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Apr-28 18:32:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Apr-28 18:32:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Apr-28 18:32:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Apr-28 18:32:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Apr-28 18:32:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Apr-28 18:32:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Apr-28 18:32:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Apr-28 18:32:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Apr-28 18:32:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Apr-28 18:32:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Apr-28 18:32:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Apr-28 18:32:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Apr-28 18:32:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2008-Apr-28 18:32:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Apr-28 18:32:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Apr-28 18:32:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Apr-28 18:32:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Apr-28 18:32:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Apr-28 18:32:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Apr-28 18:32:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Apr-28 18:32:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Apr-28 18:32:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Apr-28 18:32:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1631.200000" 2008-Apr-28 18:32:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Apr-28 18:32:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Apr-28 18:32:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Apr-28 18:32:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Apr-28 18:32:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Apr-28 18:32:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Apr-28 18:32:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Apr-28 18:32:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Apr-28 18:32:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Apr-28 18:32:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Apr-28 18:32:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Apr-28 18:32:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Apr-28 18:32:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Apr-28 18:32:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Apr-28 18:32:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Apr-28 18:32:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Apr-28 18:32:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Apr-28 18:32:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Apr-28 18:32:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Apr-28 18:32:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Apr-28 18:32:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Apr-28 18:32:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Apr-28 18:32:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Apr-28 18:32:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Apr-28 18:32:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Apr-28 18:32:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Apr-28 18:32:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Apr-28 18:32:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Apr-28 18:32:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Apr-28 18:32:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Apr-28 18:32:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Apr-28 18:32:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Apr-28 18:32:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Apr-28 18:32:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Apr-28 18:32:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Apr-28 18:32:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Apr-28 18:32:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Apr-28 18:32:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Apr-28 18:32:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Apr-28 18:32:46 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-28 18:32:46 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Apr-28 18:32:46 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Apr-28 18:32:46 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Apr-28 18:32:46 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Apr-28 18:32:46 INFO1 config_iflo: Selecting receiver ALFA 2008-Apr-28 18:32:46 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2008-Apr-28 18:32:46 LOG1 select_receiver: Calling 'select_receiver alfa no no no' 2008-Apr-28 18:32:46 START begin_task: Starting task 'selecting receiver ALFA' 2008-Apr-28 18:32:46 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Apr-28 18:32:46 NOTE select_receiver: Starting to select receiver ALFA 2008-Apr-28 18:32:46 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Apr-28 18:32:46 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Apr-28 18:32:46 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Apr-28 18:32:46 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Apr-28 18:32:46 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Apr-28 18:32:46 LOG5 finish_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Apr-28 18:32:46 INFO2 finish_task: DONE finished selecting: receiver ALFA 2008-Apr-28 18:32:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 18:32:46 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Apr-28 18:32:46 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Apr-28 18:32:46 START begin_task: Starting task 'waiting for receiver ALFA' 2008-Apr-28 18:32:46 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2008-Apr-28 18:32:46 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2008-Apr-28 18:32:46 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2008-Apr-28 18:32:46 INFO1 config_iflo: Configuring rest of the IF/LO path 2008-Apr-28 18:32:46 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2008-Apr-28 18:32:46 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-28 18:32:46 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-28 18:32:46 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-28 18:32:46 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2008-Apr-28 18:32:46 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-28 18:32:46 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-28 18:32:46 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2008-Apr-28 18:32:46 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-28 18:32:46 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-28 18:32:46 LOG3 vw_send: To DATATAKING: alfafb 1 2008-Apr-28 18:32:46 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2008-Apr-28 18:32:46 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Apr-28 18:32:46 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Apr-28 18:32:46 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2008-Apr-28 18:32:46 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2008-Apr-28 18:32:46 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2008-Apr-28 18:32:46 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2008-Apr-28 18:32:46 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2008-Apr-28 18:32:46 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2008-Apr-28 18:32:46 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Apr-28 18:32:46 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Apr-28 18:32:46 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Apr-28 18:32:46 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Apr-28 18:32:46 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Apr-28 18:32:46 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2008-Apr-28 18:32:46 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2008-Apr-28 18:32:46 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2008-Apr-28 18:32:46 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2008-Apr-28 18:32:46 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Apr-28 18:32:46 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2008-Apr-28 18:32:46 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Apr-28 18:32:46 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Apr-28 18:32:46 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 18:32:46 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Apr-28 18:32:46 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2008-Apr-28 18:32:46 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Apr-28 18:32:46 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2008-Apr-28 18:32:46 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2008-Apr-28 18:32:46 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Apr-28 18:32:46 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 18:32:46 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Apr-28 18:32:46 LOG5 begin_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2008-Apr-28 18:32:46 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Apr-28 18:32:46 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Apr-28 18:32:46 LOG4 got_cormsg: From DATATAKING: alfafb 1 2008-Apr-28 18:32:46 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2008-Apr-28 18:32:46 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2008-Apr-28 18:32:46 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2008-Apr-28 18:32:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2008-Apr-28 18:32:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2008-Apr-28 18:32:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2008-Apr-28 18:32:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2008-Apr-28 18:32:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2008-Apr-28 18:32:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2008-Apr-28 18:32:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2008-Apr-28 18:32:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2008-Apr-28 18:32:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Apr-28 18:32:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2008-Apr-28 18:32:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Apr-28 18:32:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 18:32:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Apr-28 18:32:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2008-Apr-28 18:32:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2008-Apr-28 18:32:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2008-Apr-28 18:32:47 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 18:32:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:32:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:32:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:32:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:32:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:32:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:32:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:32:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:33:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:33:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:33:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:33:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:33:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:33:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:33:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:33:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:33:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:33:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:33:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:33:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:33:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:33:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:33:02 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-28 18:33:02 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Apr-28 18:33:02 LOG5 end_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2008-Apr-28 18:33:02 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Apr-28 18:33:02 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Apr-28 18:33:02 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Apr-28 18:33:02 DONE finish_task: DONE finished configuration: IF/LO path 2008-Apr-28 18:33:02 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-28 18:33:02 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Apr-28 18:33:02 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Apr-28 18:33:02 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Apr-28 18:33:02 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Apr-28 18:33:02 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Apr-28 18:33:03 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Apr-28 18:33:03 START begin_task: Starting task 'selecting calibration port' 2008-Apr-28 18:33:03 LOG5 begin_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-Apr-28 18:33:03 LOG3 vw_send: To DATATAKING: calport 3 2008-Apr-28 18:33:03 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Apr-28 18:33:03 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 18:33:03 START begin_task: Starting task 'waiting on calport' 2008-Apr-28 18:33:03 LOG5 begin_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2008-Apr-28 18:33:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:33:03 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Apr-28 18:33:03 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 18:33:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:33:03 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-28 18:33:03 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Apr-28 18:33:03 LOG5 end_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2008-Apr-28 18:33:03 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Apr-28 18:33:03 STOP finish_task: Finishing task 'selecting calibration port' 2008-Apr-28 18:33:03 LOG5 finish_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-Apr-28 18:33:03 INFO2 finish_task: DONE finished configuring: calibration port 2008-Apr-28 18:33:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 18:33:03 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Apr-28 18:33:03 LOG5 end_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-Apr-28 18:33:03 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Apr-28 18:33:03 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Apr-28 18:33:03 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Apr-28 18:33:03 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Apr-28 18:33:03 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Apr-28 18:33:03 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Apr-28 18:33:03 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Apr-28 18:33:03 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Apr-28 18:33:03 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Steve Schnei 2008-Apr-28 18:33:03 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Steve Schnei 2008-Apr-28 18:33:03 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Steve Schnei 2008-Apr-28 18:33:03 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Steve Schnei 2008-Apr-28 18:33:03 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Apr-28 18:33:03 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Apr-28 18:33:03 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-28 18:33:03 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2008-Apr-28 18:33:03 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-28 18:33:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:33:03 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-28 18:33:03 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-28 18:33:03 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-28 18:33:03 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2008-Apr-28 18:33:03 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Steve Schnei 2008-Apr-28 18:33:03 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Steve Schnei 2008-Apr-28 18:33:03 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Steve Schnei 2008-Apr-28 18:33:03 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Steve Schnei 2008-Apr-28 18:33:04 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Apr-28 18:33:04 LOG5 finish_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Apr-28 18:33:04 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Apr-28 18:33:04 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-28 18:33:04 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Apr-28 18:33:04 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Apr-28 18:33:04 COMMAND run_command_line: EXECUTING command 6: 'CATALOG togs_ages.cat' 2008-Apr-28 18:33:04 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/togs_ages.cat' 2008-Apr-28 18:33:04 COMMAND run_command_line: EXECUTING command 7: 'GOTO galfasrc' 2008-Apr-28 18:33:04 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2048/togs_ages.cat galfasrc nooffset nowait' 2008-Apr-28 18:33:04 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2008-Apr-28 18:33:04 LOG5 begin_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2008-Apr-28 18:33:04 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2008-Apr-28 18:33:04 LOG3 track_source: Calling 'track_source galfasrc 094300.0 +215300 J 0.0 0.0 main small /share/obs4/usr/a2048/togs_ages.cat 0 Topocentric velocity(optical)' 2008-Apr-28 18:33:04 START begin_task: Starting task 'sending tracking commands' 2008-Apr-28 18:33:04 LOG5 begin_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2008-Apr-28 18:33:04 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2008-Apr-28 18:33:04 INFO1 track_source: Starting to track galfasrc 2008-Apr-28 18:33:04 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2008-Apr-28 18:33:04 LOG3 vw_send: To DATATAKING: set ra 094300.0 2008-Apr-28 18:33:04 LOG3 vw_send: To DATATAKING: set dec +215300 2008-Apr-28 18:33:04 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-28 18:33:04 LOG3 vw_send: To DATATAKING: pnt tr 094300.0 +215300 -CJ 2008-Apr-28 18:33:04 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Apr-28 18:33:04 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-28 18:33:04 LOG5 finish_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2008-Apr-28 18:33:04 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-28 18:33:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 18:33:04 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-28 18:33:04 LOG5 end_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2008-Apr-28 18:33:04 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2008-Apr-28 18:33:04 LOG5 finish_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2008-Apr-28 18:33:04 DONE finish_task: DONE finished tracking: source 'galfasrc' 2008-Apr-28 18:33:04 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-28 18:33:04 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2008-Apr-28 18:33:04 LOG5 end_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2008-Apr-28 18:33:04 COMMAND run_command_line: EXECUTING command 8: 'ALFAANGLE 19' 2008-Apr-28 18:33:04 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2008-Apr-28 18:33:04 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Apr-28 18:33:04 LOG5 begin_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2008-Apr-28 18:33:04 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Apr-28 18:33:04 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Apr-28 18:33:04 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-Apr-28 18:33:04 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-28 18:33:04 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-28 18:33:04 LOG5 begin_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2008-Apr-28 18:33:04 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Steve Schnei' 2008-Apr-28 18:33:04 NOTE WAPPDATA-new_file: New FITS file: wapp.20080428.a2048.0000.fits 2008-Apr-28 18:33:05 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2008-Apr-28 18:33:05 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Apr-28 18:33:05 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Apr-28 18:33:05 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20080428.a2048.0000.fits} 2008-Apr-28 18:33:05 LOG4 got_cormsg: From DATATAKING: set ra 094300.0 2008-Apr-28 18:33:05 LOG4 got_cormsg: From DATATAKING: set dec +215300 2008-Apr-28 18:33:05 LOG4 got_cormsg: From DATATAKING: vw% 094300.0 2008-Apr-28 18:33:05 LOG4 got_cormsg: From DATATAKING: vw% +215300 2008-Apr-28 18:33:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:33:05 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-28 18:33:05 LOG4 got_cormsg: From DATATAKING: pnt tr 094300.0 +215300 -CJ 2008-Apr-28 18:33:05 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Apr-28 18:33:05 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-28 18:33:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:33:05 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Steve Schnei' 2008-Apr-28 18:33:12 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-28 18:33:12 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Apr-28 18:33:12 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-28 18:33:12 LOG5 end_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2008-Apr-28 18:33:12 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-28 18:33:12 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Apr-28 18:33:12 LOG5 finish_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2008-Apr-28 18:33:12 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Apr-28 18:33:12 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-28 18:33:12 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Apr-28 18:33:12 LOG5 end_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2008-Apr-28 18:33:12 COMMAND run_command_line: EXECUTING command 9: 'WAITTRACK' 2008-Apr-28 18:33:12 BEGIN begin_task: Starting task 'waiting on telescope' 2008-Apr-28 18:33:12 LOG5 begin_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2008-Apr-28 18:33:12 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-28 18:33:12 LOG3 waittrk: Start waittrk 5 2008-Apr-28 18:33:12 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-28 18:33:12 LOG5 begin_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2008-Apr-28 18:33:17 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-28 18:33:17 LOG5 end_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2008-Apr-28 18:33:17 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-28 18:33:17 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2008-Apr-28 18:36:08 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-28 18:36:08 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2008-Apr-28 18:36:08 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-28 18:36:08 INFO2 waittrk: Now tracking galfasrc 2008-Apr-28 18:36:08 LOG4 waittrk: Current telescope position: Az = 254.01 ZA = 15.73 2008-Apr-28 18:36:08 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-28 18:36:08 LOG5 finish_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2008-Apr-28 18:36:08 DONE finish_task: DONE finished waiting: telescope on source 2008-Apr-28 18:36:08 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-28 18:36:08 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-28 18:36:08 LOG5 end_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2008-Apr-28 18:36:08 COMMAND run_command_line: EXECUTING command 13: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2008-Apr-28 18:36:08 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2008-Apr-28 18:36:08 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-28 18:36:08 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first 0 {1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2008-Apr-28 18:36:08 BEGIN begin_task: Starting task 'smart frequency switching' 2008-Apr-28 18:36:08 LOG5 begin_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2008-Apr-28 18:36:08 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'galfasrc' 2008-Apr-28 18:36:08 INFO1 smartfreq: Starting pattern: Smart frequency switching 2008-Apr-28 18:36:08 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2008-Apr-28 18:36:08 START begin_task: Starting task 'selecting calibration type' 2008-Apr-28 18:36:08 LOG5 begin_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2008-Apr-28 18:36:08 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-28 18:36:09 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-28 18:36:09 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 18:36:09 START begin_task: Starting task 'waiting on setcal' 2008-Apr-28 18:36:09 LOG5 begin_task: Level: (4) ID = <10022> Status = 0 0 0 0 ok 2008-Apr-28 18:36:09 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-28 18:36:09 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 18:36:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:36:09 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-28 18:36:09 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-28 18:36:09 LOG5 end_task: Level: (4) ID = <10022> Status = 0 0 0 0 ok 2008-Apr-28 18:36:09 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-28 18:36:09 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-28 18:36:09 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-28 18:36:09 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-28 18:36:09 LOG5 begin_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2008-Apr-28 18:36:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:36:09 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-28 18:36:09 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-28 18:36:09 LOG5 end_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2008-Apr-28 18:36:09 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-28 18:36:09 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-28 18:36:09 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-28 18:36:09 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-28 18:36:09 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-28 18:36:09 LOG5 begin_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2008-Apr-28 18:36:09 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-28 18:36:09 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-28 18:36:09 LOG5 end_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2008-Apr-28 18:36:09 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-28 18:36:09 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-28 18:36:09 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-28 18:36:09 LOG5 finish_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2008-Apr-28 18:36:09 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-28 18:36:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 18:36:09 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-28 18:36:09 LOG5 end_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2008-Apr-28 18:36:09 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Steve Schnei 2008-Apr-28 18:36:09 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Steve Schnei 2008-Apr-28 18:36:09 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Steve Schnei 2008-Apr-28 18:36:09 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Steve Schnei 2008-Apr-28 18:36:09 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20080428.a2048.0000.fits' is empty! 2008-Apr-28 18:36:09 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2008-Apr-28 18:36:09 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-28 18:36:09 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2008-Apr-28 18:36:09 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-28 18:36:09 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-28 18:36:09 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-28 18:36:09 LOG5 begin_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2008-Apr-28 18:36:09 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-28 18:36:09 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-28 18:36:09 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-28 18:36:09 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-28 18:36:09 LOG5 end_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2008-Apr-28 18:36:09 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2008-Apr-28 18:36:09 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-28 18:36:09 LOG5 begin_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-Apr-28 18:36:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-28 18:36:09 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-28 18:36:09 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-28 18:36:09 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-28 18:36:09 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 18:36:09 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-28 18:36:09 LOG5 begin_task: Level: (4) ID = <10027> Status = 0 0 0 0 ok 2008-Apr-28 18:36:09 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-28 18:36:09 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 18:36:10 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Steve Schnei' 2008-Apr-28 18:36:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:36:12 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-28 18:36:12 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-28 18:36:12 LOG5 end_task: Level: (4) ID = <10027> Status = 0 0 0 0 ok 2008-Apr-28 18:36:12 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-28 18:36:12 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-28 18:36:12 LOG5 begin_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2008-Apr-28 18:36:12 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-28 18:36:12 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-28 18:36:12 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-28 18:36:12 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-28 18:36:12 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-28 18:36:12 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-28 18:36:12 LOG5 begin_task: Level: (5) ID = <10029> Status = 0 0 0 0 ok 2008-Apr-28 18:36:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:36:13 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-28 18:36:13 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 1 dB --- beam 1: 8 7 dB 2008-Apr-28 18:36:13 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-28 18:36:13 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 6 dB 2008-Apr-28 18:36:13 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 3 3 dB 2008-Apr-28 18:36:13 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-28 18:36:13 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-28 18:36:13 LOG5 end_task: Level: (5) ID = <10029> Status = 0 0 0 0 ok 2008-Apr-28 18:36:13 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.901 0.972 ALFA beam 1: 0.902 0.907 2008-Apr-28 18:36:13 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.056 1.001 ALFA beam 3: 1.028 1.086 2008-Apr-28 18:36:13 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.966 1.005 ALFA beam 5: 1.053 0.936 2008-Apr-28 18:36:13 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.024 1.027 ALFA beam 7: 0.898 0.917 2008-Apr-28 18:36:13 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-28 18:36:13 LOG5 finish_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2008-Apr-28 18:36:13 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-28 18:36:13 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 18:36:13 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-28 18:36:13 LOG5 end_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2008-Apr-28 18:36:13 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-28 18:36:13 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-28 18:36:13 LOG5 finish_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-Apr-28 18:36:13 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-28 18:36:13 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 18:36:13 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-28 18:36:13 LOG5 end_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-Apr-28 18:36:13 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2008-Apr-28 18:36:13 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2008-Apr-28 18:36:13 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2008-Apr-28 18:36:13 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-28 18:36:13 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32793 J 2008-Apr-28 18:36:13 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.5 2008-Apr-28 18:36:13 LOG2 antvel: Parameters to Doppler: Topocentric 81373 2008 119 0.0 2008-Apr-28 18:36:13 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-28 18:36:13 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2008-Apr-28 18:36:13 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2008-Apr-28 18:36:13 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-28 18:36:13 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-28 18:36:13 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Apr-28 18:36:13 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 18:36:13 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-28 18:36:13 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-28 18:36:13 LOG5 begin_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2008-Apr-28 18:36:13 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-28 18:36:13 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.637581 2008.3279264899738 18.999933 2008-Apr-28 18:36:13 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666660 21.883333333333329 2008-Apr-28 18:36:13 LOG4 log_alfabeam: ALFABEAM 1 9.709474228687059 21.848105671428485 2008-Apr-28 18:36:13 LOG4 log_alfabeam: ALFABEAM 2 9.715266357055723 21.792343622900571 2008-Apr-28 18:36:13 LOG4 log_alfabeam: ALFABEAM 3 9.722467248236114 21.827160020272583 2008-Apr-28 18:36:13 LOG4 log_alfabeam: ALFABEAM 4 9.723858506083369 21.918710919791931 2008-Apr-28 18:36:13 LOG4 log_alfabeam: ALFABEAM 5 9.718031275953127 21.974607369063527 2008-Apr-28 18:36:13 LOG4 log_alfabeam: ALFABEAM 6 9.710848079621742 21.938818953640311 2008-Apr-28 18:36:13 INFO2 take_spectra: Starting WAPP+GALFA scan: 811900061 2008-Apr-28 18:36:14 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-28 18:36:14 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-28 18:36:14 LOG5 begin_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2008-Apr-28 18:36:14 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-28 18:36:14 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Apr-28 18:36:14 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 18:36:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:36:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:36:14 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81375.00 2008-Apr-28 18:36:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-28 18:36:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:36:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:36:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:36:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:36:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-28 18:36:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-28 18:36:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-28 18:36:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-28 18:36:25 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-28 18:36:25 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-28 18:36:25 LOG5 end_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2008-Apr-28 18:36:25 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-28 18:36:25 LOG5 end_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2008-Apr-28 18:36:25 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2008-Apr-28 18:36:25 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2008-Apr-28 18:36:25 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2008-Apr-28 18:36:25 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-28 18:36:25 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32793 J 2008-Apr-28 18:36:25 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.5 2008-Apr-28 18:36:25 LOG2 antvel: Parameters to Doppler: Topocentric 81385 2008 119 0.0 2008-Apr-28 18:36:25 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-28 18:36:25 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2008-Apr-28 18:36:25 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2008-Apr-28 18:36:25 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-28 18:36:25 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-28 18:36:25 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Apr-28 18:36:25 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 18:36:25 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-28 18:36:25 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-28 18:36:25 LOG5 begin_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2008-Apr-28 18:36:25 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-28 18:36:25 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.640923 2008.3279268702308 18.999933 2008-Apr-28 18:36:25 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666663 21.883333333333340 2008-Apr-28 18:36:25 LOG4 log_alfabeam: ALFABEAM 1 9.709476317837936 21.848023288176627 2008-Apr-28 18:36:25 LOG4 log_alfabeam: ALFABEAM 2 9.715271698923182 21.792327990403749 2008-Apr-28 18:36:25 LOG4 log_alfabeam: ALFABEAM 3 9.722470560435823 21.827225775348605 2008-Apr-28 18:36:25 LOG4 log_alfabeam: ALFABEAM 4 9.723856398312511 21.918793974173987 2008-Apr-28 18:36:25 LOG4 log_alfabeam: ALFABEAM 5 9.718025794998663 21.974623473199117 2008-Apr-28 18:36:25 LOG4 log_alfabeam: ALFABEAM 6 9.710844767054391 21.938751014195734 2008-Apr-28 18:36:25 INFO2 take_spectra: Starting WAPP+GALFA scan: 811900062 2008-Apr-28 18:36:26 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-28 18:36:26 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-28 18:36:26 LOG5 begin_task: Level: (4) ID = <10033> Status = 0 0 0 0 ok 2008-Apr-28 18:36:26 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-28 18:36:26 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Apr-28 18:36:26 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 18:36:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:36:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:36:26 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81387.00 2008-Apr-28 18:36:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-28 18:36:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:36:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:36:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:36:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:36:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-28 18:36:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-28 18:36:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-28 18:36:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-28 18:36:37 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-28 18:36:37 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-28 18:36:37 LOG5 end_task: Level: (4) ID = <10033> Status = 0 0 0 0 ok 2008-Apr-28 18:36:37 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-28 18:36:37 LOG5 end_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2008-Apr-28 18:36:37 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2008-Apr-28 18:36:37 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2008-Apr-28 18:36:37 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2008-Apr-28 18:36:37 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-28 18:36:37 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32793 J 2008-Apr-28 18:36:37 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.5 2008-Apr-28 18:36:37 LOG2 antvel: Parameters to Doppler: Topocentric 81397 2008 119 0.0 2008-Apr-28 18:36:37 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-28 18:36:37 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2008-Apr-28 18:36:37 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2008-Apr-28 18:36:37 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-28 18:36:37 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-28 18:36:37 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Apr-28 18:36:37 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 18:36:37 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-28 18:36:37 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-28 18:36:37 LOG5 begin_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2008-Apr-28 18:36:37 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-28 18:36:37 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.644266 2008.3279272504881 18.999933 2008-Apr-28 18:36:37 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666670 21.883333333333329 2008-Apr-28 18:36:37 LOG4 log_alfabeam: ALFABEAM 1 9.709478422409862 21.847940514425897 2008-Apr-28 18:36:37 LOG4 log_alfabeam: ALFABEAM 2 9.715277068553862 21.792312340803473 2008-Apr-28 18:36:37 LOG4 log_alfabeam: ALFABEAM 3 9.722473885428995 21.827291898913217 2008-Apr-28 18:36:37 LOG4 log_alfabeam: ALFABEAM 4 9.723854274927870 21.918877422642872 2008-Apr-28 18:36:37 LOG4 log_alfabeam: ALFABEAM 5 9.718020285398286 21.974639594607456 2008-Apr-28 18:36:37 LOG4 log_alfabeam: ALFABEAM 6 9.710841441915264 21.938682693107026 2008-Apr-28 18:36:37 INFO2 take_spectra: Starting WAPP+GALFA scan: 811900063 2008-Apr-28 18:36:38 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-28 18:36:38 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-28 18:36:38 LOG5 begin_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2008-Apr-28 18:36:38 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-28 18:36:38 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Apr-28 18:36:38 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 18:36:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:36:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:36:38 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81399.00 2008-Apr-28 18:36:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-28 18:36:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:36:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:36:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:36:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:36:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-28 18:36:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-28 18:36:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-28 18:36:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-28 18:36:49 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-28 18:36:49 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-28 18:36:49 LOG5 end_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2008-Apr-28 18:36:49 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-28 18:36:49 LOG5 end_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2008-Apr-28 18:36:49 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2008-Apr-28 18:36:49 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2008-Apr-28 18:36:49 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2008-Apr-28 18:36:49 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-28 18:36:49 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32793 J 2008-Apr-28 18:36:49 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.5 2008-Apr-28 18:36:49 LOG2 antvel: Parameters to Doppler: Topocentric 81409 2008 119 0.0 2008-Apr-28 18:36:49 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-28 18:36:49 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2008-Apr-28 18:36:49 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2008-Apr-28 18:36:49 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-28 18:36:49 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-28 18:36:49 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Apr-28 18:36:49 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 18:36:49 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-28 18:36:49 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-28 18:36:49 LOG5 begin_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2008-Apr-28 18:36:49 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-28 18:36:49 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.647608 2008.3279276307451 18.999933 2008-Apr-28 18:36:49 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666665 21.883333333333333 2008-Apr-28 18:36:49 LOG4 log_alfabeam: ALFABEAM 1 9.709480541298664 21.847857396689886 2008-Apr-28 18:36:49 LOG4 log_alfabeam: ALFABEAM 2 9.715282462965336 21.792296683700581 2008-Apr-28 18:36:49 LOG4 log_alfabeam: ALFABEAM 3 9.722477221306010 21.827358354623012 2008-Apr-28 18:36:49 LOG4 log_alfabeam: ALFABEAM 4 9.723852137042662 21.918961218305668 2008-Apr-28 18:36:49 LOG4 log_alfabeam: ALFABEAM 5 9.718014750210680 21.974655723382597 2008-Apr-28 18:36:49 LOG4 log_alfabeam: ALFABEAM 6 9.710838106117864 21.938614027927745 2008-Apr-28 18:36:49 INFO2 take_spectra: Starting WAPP+GALFA scan: 811900064 2008-Apr-28 18:36:50 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-28 18:36:50 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-28 18:36:50 LOG5 begin_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2008-Apr-28 18:36:50 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-28 18:36:50 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Apr-28 18:36:50 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 18:36:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:36:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:36:50 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81411.00 2008-Apr-28 18:36:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-28 18:36:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:36:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:36:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:36:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:36:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-28 18:36:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-28 18:36:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-28 18:36:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-28 18:37:01 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-28 18:37:01 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-28 18:37:01 LOG5 end_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2008-Apr-28 18:37:01 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-28 18:37:01 LOG5 end_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2008-Apr-28 18:37:01 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2008-Apr-28 18:37:01 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2008-Apr-28 18:37:01 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2008-Apr-28 18:37:01 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-28 18:37:01 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32793 J 2008-Apr-28 18:37:01 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.5 2008-Apr-28 18:37:01 LOG2 antvel: Parameters to Doppler: Topocentric 81421 2008 119 0.0 2008-Apr-28 18:37:01 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-28 18:37:01 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2008-Apr-28 18:37:01 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2008-Apr-28 18:37:01 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-28 18:37:01 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-28 18:37:01 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Apr-28 18:37:01 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 18:37:01 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-28 18:37:01 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-28 18:37:01 LOG5 begin_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2008-Apr-28 18:37:01 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-28 18:37:01 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.650951 2008.3279280110021 18.999933 2008-Apr-28 18:37:01 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333347 2008-Apr-28 18:37:01 LOG4 log_alfabeam: ALFABEAM 1 9.709482675929490 21.847773882187507 2008-Apr-28 18:37:01 LOG4 log_alfabeam: ALFABEAM 2 9.715287885618647 21.792281009970694 2008-Apr-28 18:37:01 LOG4 log_alfabeam: ALFABEAM 3 9.722480570143437 21.827425185503895 2008-Apr-28 18:37:01 LOG4 log_alfabeam: ALFABEAM 4 9.723849983218189 21.919045414373638 2008-Apr-28 18:37:01 LOG4 log_alfabeam: ALFABEAM 5 9.718009185883066 21.974671868907723 2008-Apr-28 18:37:01 LOG4 log_alfabeam: ALFABEAM 6 9.710834757589554 21.938544974204000 2008-Apr-28 18:37:01 INFO2 take_spectra: Starting WAPP+GALFA scan: 811900065 2008-Apr-28 18:37:02 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-28 18:37:02 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-28 18:37:02 LOG5 begin_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2008-Apr-28 18:37:02 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-28 18:37:02 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Apr-28 18:37:02 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 18:37:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:37:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:37:02 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81423.00 2008-Apr-28 18:37:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-28 18:37:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:37:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:37:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:37:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:37:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-28 18:37:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-28 18:37:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-28 18:37:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-28 18:37:13 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-28 18:37:13 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-28 18:37:13 LOG5 end_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2008-Apr-28 18:37:13 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-28 18:37:13 LOG5 end_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2008-Apr-28 18:37:13 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2008-Apr-28 18:37:13 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2008-Apr-28 18:37:13 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2008-Apr-28 18:37:13 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-28 18:37:13 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32793 J 2008-Apr-28 18:37:13 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.5 2008-Apr-28 18:37:13 LOG2 antvel: Parameters to Doppler: Topocentric 81433 2008 119 0.0 2008-Apr-28 18:37:13 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-28 18:37:13 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2008-Apr-28 18:37:13 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2008-Apr-28 18:37:13 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-28 18:37:13 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-28 18:37:13 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Apr-28 18:37:13 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 18:37:13 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-28 18:37:13 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-28 18:37:13 LOG5 begin_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2008-Apr-28 18:37:13 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-28 18:37:13 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.654293 2008.3279283912591 18.999933 2008-Apr-28 18:37:13 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333336 2008-Apr-28 18:37:13 LOG4 log_alfabeam: ALFABEAM 1 9.709484825184399 21.847690017812148 2008-Apr-28 18:37:13 LOG4 log_alfabeam: ALFABEAM 2 9.715293333504942 21.792265329243723 2008-Apr-28 18:37:13 LOG4 log_alfabeam: ALFABEAM 3 9.722483930018569 21.827492354867008 2008-Apr-28 18:37:13 LOG4 log_alfabeam: ALFABEAM 4 9.723847814581610 21.919129963570342 2008-Apr-28 18:37:13 LOG4 log_alfabeam: ALFABEAM 5 9.718003595501427 21.974688021246600 2008-Apr-28 18:37:13 LOG4 log_alfabeam: ALFABEAM 6 9.710831398256788 21.938475569847583 2008-Apr-28 18:37:13 INFO2 take_spectra: Starting WAPP+GALFA scan: 811900066 2008-Apr-28 18:37:14 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-28 18:37:14 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-28 18:37:14 LOG5 begin_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2008-Apr-28 18:37:14 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-28 18:37:14 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Apr-28 18:37:14 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 18:37:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:37:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:37:14 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81435.00 2008-Apr-28 18:37:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-28 18:37:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:37:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:37:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:37:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:37:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-28 18:37:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-28 18:37:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-28 18:37:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-28 18:37:25 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-28 18:37:25 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-28 18:37:25 LOG5 end_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2008-Apr-28 18:37:25 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-28 18:37:25 LOG5 end_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2008-Apr-28 18:37:25 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2008-Apr-28 18:37:25 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2008-Apr-28 18:37:25 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2008-Apr-28 18:37:25 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-28 18:37:25 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32793 J 2008-Apr-28 18:37:25 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.5 2008-Apr-28 18:37:25 LOG2 antvel: Parameters to Doppler: Topocentric 81445 2008 119 0.0 2008-Apr-28 18:37:25 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-28 18:37:25 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2008-Apr-28 18:37:25 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2008-Apr-28 18:37:25 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-28 18:37:25 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-28 18:37:25 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Apr-28 18:37:25 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 18:37:25 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-28 18:37:25 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-28 18:37:25 LOG5 begin_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2008-Apr-28 18:37:25 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-28 18:37:25 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.657636 2008.3279287715161 18.999933 2008-Apr-28 18:37:25 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333336 2008-Apr-28 18:37:25 LOG4 log_alfabeam: ALFABEAM 1 9.709486990510992 21.847605750271647 2008-Apr-28 18:37:25 LOG4 log_alfabeam: ALFABEAM 2 9.715298810122606 21.792249632396249 2008-Apr-28 18:37:25 LOG4 log_alfabeam: ALFABEAM 3 9.722487303023534 21.827559906244307 2008-Apr-28 18:37:25 LOG4 log_alfabeam: ALFABEAM 4 9.723845629671457 21.919214919622704 2008-Apr-28 18:37:25 LOG4 log_alfabeam: ALFABEAM 5 9.717997975474416 21.974704189780258 2008-Apr-28 18:37:25 LOG4 log_alfabeam: ALFABEAM 6 9.710828026031788 21.938405769881076 2008-Apr-28 18:37:25 INFO2 take_spectra: Starting WAPP+GALFA scan: 811900067 2008-Apr-28 18:37:26 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-28 18:37:26 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-28 18:37:26 LOG5 begin_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2008-Apr-28 18:37:26 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-28 18:37:26 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Apr-28 18:37:26 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 18:37:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:37:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:37:26 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81447.00 2008-Apr-28 18:37:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-28 18:37:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:37:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:37:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:37:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:37:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-28 18:37:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-28 18:37:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-28 18:37:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-28 18:37:37 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-28 18:37:37 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-28 18:37:37 LOG5 end_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2008-Apr-28 18:37:37 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-28 18:37:37 LOG5 end_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2008-Apr-28 18:37:37 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2008-Apr-28 18:37:37 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-28 18:37:37 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-28 18:37:37 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-28 18:37:37 LOG5 begin_task: Level: (3) ID = <10044> Status = 0 0 0 0 ok 2008-Apr-28 18:37:37 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-28 18:37:37 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-28 18:37:37 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-28 18:37:37 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-28 18:37:37 LOG5 end_task: Level: (3) ID = <10044> Status = 0 0 0 0 ok 2008-Apr-28 18:37:37 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2008-Apr-28 18:37:37 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2008-Apr-28 18:37:37 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2008-Apr-28 18:37:37 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-28 18:37:37 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32793 J 2008-Apr-28 18:37:37 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.5 2008-Apr-28 18:37:37 LOG2 antvel: Parameters to Doppler: Topocentric 81457 2008 119 0.0 2008-Apr-28 18:37:37 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-28 18:37:37 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2008-Apr-28 18:37:37 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2008-Apr-28 18:37:37 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-28 18:37:37 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-28 18:37:37 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Apr-28 18:37:37 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 18:37:37 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-28 18:37:37 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-28 18:37:37 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2008-Apr-28 18:37:37 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-28 18:37:37 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.660978 2008.3279291517733 18.999933 2008-Apr-28 18:37:37 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333329 2008-Apr-28 18:37:37 LOG4 log_alfabeam: ALFABEAM 1 9.709489170777330 21.847521126844828 2008-Apr-28 18:37:37 LOG4 log_alfabeam: ALFABEAM 2 9.715304312435942 21.792233929087455 2008-Apr-28 18:37:37 LOG4 log_alfabeam: ALFABEAM 3 9.722490687222361 21.827627802595959 2008-Apr-28 18:37:37 LOG4 log_alfabeam: ALFABEAM 4 9.723843429629067 21.919300234865020 2008-Apr-28 18:37:37 LOG4 log_alfabeam: ALFABEAM 5 9.717992328915743 21.974720364542165 2008-Apr-28 18:37:37 LOG4 log_alfabeam: ALFABEAM 6 9.710824642854117 21.938335612580406 2008-Apr-28 18:37:37 INFO2 take_spectra: Starting WAPP+GALFA scan: 811900068 2008-Apr-28 18:37:38 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-28 18:37:38 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-28 18:37:38 LOG5 begin_task: Level: (4) ID = <10046> Status = 0 0 0 0 ok 2008-Apr-28 18:37:38 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-28 18:37:38 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Apr-28 18:37:38 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 18:37:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:37:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:37:38 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81459.00 2008-Apr-28 18:37:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-28 18:37:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:37:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:37:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:37:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:37:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-28 18:37:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-28 18:37:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-28 18:37:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-28 18:37:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.554 > 1.4)! 2008-Apr-28 18:37:41 LOG4 check_wapp_levels: WAPP-1 power levels: 1.309 1.283 1.272 1.229 2008-Apr-28 18:37:41 LOG4 check_wapp_levels: WAPP-2 power levels: 1.435 1.405 1.488 1.529 2008-Apr-28 18:37:41 LOG4 check_wapp_levels: WAPP-3 power levels: 1.404 1.422 1.554 1.289 2008-Apr-28 18:37:41 LOG4 check_wapp_levels: WAPP-4 power levels: 1.477 1.468 1.288 1.306 2008-Apr-28 18:37:43 INFO5 check_wapp_levels: WAPP power levels are between 1.227 and 1.555 (still bad) 2008-Apr-28 18:37:45 INFO5 check_wapp_levels: WAPP power levels are between 1.227 and 1.551 (still bad) 2008-Apr-28 18:37:47 INFO5 check_wapp_levels: WAPP power levels are between 1.227 and 1.555 (still bad) 2008-Apr-28 18:37:49 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-28 18:37:49 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-28 18:37:49 LOG5 end_task: Level: (4) ID = <10046> Status = 0 0 0 0 ok 2008-Apr-28 18:37:49 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-28 18:37:49 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2008-Apr-28 18:37:49 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2008-Apr-28 18:37:49 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2008-Apr-28 18:37:49 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2008-Apr-28 18:37:49 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-28 18:37:49 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32793 J 2008-Apr-28 18:37:49 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.5 2008-Apr-28 18:37:49 LOG2 antvel: Parameters to Doppler: Topocentric 81469 2008 119 0.0 2008-Apr-28 18:37:49 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-28 18:37:49 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2008-Apr-28 18:37:49 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2008-Apr-28 18:37:49 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-28 18:37:49 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-28 18:37:49 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Apr-28 18:37:49 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 18:37:49 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-28 18:37:49 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-28 18:37:49 LOG5 begin_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2008-Apr-28 18:37:49 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-28 18:37:49 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.664321 2008.3279295320303 18.999933 2008-Apr-28 18:37:49 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333329 2008-Apr-28 18:37:49 LOG4 log_alfabeam: ALFABEAM 1 9.709491367453982 21.847436093719466 2008-Apr-28 18:37:49 LOG4 log_alfabeam: ALFABEAM 2 9.715309843981402 21.792218210196207 2008-Apr-28 18:37:49 LOG4 log_alfabeam: ALFABEAM 3 9.722494084722923 21.827696087970288 2008-Apr-28 18:37:49 LOG4 log_alfabeam: ALFABEAM 4 9.723841212969692 21.919385963548955 2008-Apr-28 18:37:49 LOG4 log_alfabeam: ALFABEAM 5 9.717986652194755 21.974736554909793 2008-Apr-28 18:37:49 LOG4 log_alfabeam: ALFABEAM 6 9.710821246620670 21.938265052433906 2008-Apr-28 18:37:49 INFO2 take_spectra: Starting WAPP+GALFA scan: 811900069 2008-Apr-28 18:37:50 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-28 18:37:50 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-28 18:37:50 LOG5 begin_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2008-Apr-28 18:37:50 INFO5 check_wapp_levels: WAPP power levels are between 1.227 and 1.554 (still bad) 2008-Apr-28 18:37:50 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-28 18:37:50 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Apr-28 18:37:50 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 18:37:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:37:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:37:50 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81471.00 2008-Apr-28 18:37:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-28 18:37:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:37:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:37:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:37:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:37:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-28 18:37:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-28 18:37:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-28 18:37:52 INFO5 check_wapp_levels: WAPP power levels are between 1.210 and 1.528 (still bad) 2008-Apr-28 18:37:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-28 18:37:54 INFO5 check_wapp_levels: WAPP power levels are between 1.209 and 1.494 (still bad) 2008-Apr-28 18:37:56 INFO5 check_wapp_levels: WAPP power levels are between 1.208 and 1.495 (still bad) 2008-Apr-28 18:37:58 INFO5 check_wapp_levels: WAPP power levels are between 1.208 and 1.495 (still bad) 2008-Apr-28 18:38:00 INFO5 check_wapp_levels: WAPP power levels are between 1.209 and 1.493 (still bad) 2008-Apr-28 18:38:01 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-28 18:38:01 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-28 18:38:01 LOG5 end_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2008-Apr-28 18:38:01 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-28 18:38:01 LOG5 end_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2008-Apr-28 18:38:01 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2008-Apr-28 18:38:01 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2008-Apr-28 18:38:01 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2008-Apr-28 18:38:01 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-28 18:38:01 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32793 J 2008-Apr-28 18:38:01 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.5 2008-Apr-28 18:38:01 LOG2 antvel: Parameters to Doppler: Topocentric 81481 2008 119 0.0 2008-Apr-28 18:38:01 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-28 18:38:01 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2008-Apr-28 18:38:01 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2008-Apr-28 18:38:01 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-28 18:38:01 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-28 18:38:01 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Apr-28 18:38:01 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 18:38:01 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-28 18:38:01 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-28 18:38:01 LOG5 begin_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2008-Apr-28 18:38:01 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-28 18:38:01 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.667663 2008.3279299122873 18.999933 2008-Apr-28 18:38:01 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666658 21.883333333333329 2008-Apr-28 18:38:01 LOG4 log_alfabeam: ALFABEAM 1 9.709493579394756 21.847350698565705 2008-Apr-28 18:38:01 LOG4 log_alfabeam: ALFABEAM 2 9.715315401696010 21.792202485410971 2008-Apr-28 18:38:01 LOG4 log_alfabeam: ALFABEAM 3 9.722497493575810 21.827764724970852 2008-Apr-28 18:38:01 LOG4 log_alfabeam: ALFABEAM 4 9.723838980849086 21.919472057613675 2008-Apr-28 18:38:01 LOG4 log_alfabeam: ALFABEAM 5 9.717980948453324 21.974752750886228 2008-Apr-28 18:38:01 LOG4 log_alfabeam: ALFABEAM 6 9.710817839284317 21.938194128087570 2008-Apr-28 18:38:01 INFO2 take_spectra: Starting WAPP+GALFA scan: 811900070 2008-Apr-28 18:38:02 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-28 18:38:02 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-28 18:38:02 LOG5 begin_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2008-Apr-28 18:38:02 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-28 18:38:02 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Apr-28 18:38:02 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 18:38:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:38:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:38:02 INFO5 check_wapp_levels: WAPP power levels are between 1.209 and 1.494 (still bad) 2008-Apr-28 18:38:02 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81483.00 2008-Apr-28 18:38:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-28 18:38:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:38:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:38:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:38:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:38:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-28 18:38:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-28 18:38:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-28 18:38:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-28 18:38:04 INFO5 check_wapp_levels: WAPP power levels are between 1.209 and 1.494 (still bad) 2008-Apr-28 18:38:06 INFO5 check_wapp_levels: WAPP power levels are between 1.209 and 1.491 (still bad) 2008-Apr-28 18:38:08 INFO5 check_wapp_levels: WAPP power levels are between 1.208 and 1.492 (still bad) 2008-Apr-28 18:38:10 INFO5 check_wapp_levels: WAPP power levels are between 1.207 and 1.492 (still bad) 2008-Apr-28 18:38:12 INFO5 check_wapp_levels: WAPP power levels are between 1.205 and 1.492 (still bad) 2008-Apr-28 18:38:13 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-28 18:38:13 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-28 18:38:13 LOG5 end_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2008-Apr-28 18:38:13 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-28 18:38:13 LOG5 end_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2008-Apr-28 18:38:13 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2008-Apr-28 18:38:13 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2008-Apr-28 18:38:13 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2008-Apr-28 18:38:13 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-28 18:38:13 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32793 J 2008-Apr-28 18:38:13 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.5 2008-Apr-28 18:38:13 LOG2 antvel: Parameters to Doppler: Topocentric 81493 2008 119 0.0 2008-Apr-28 18:38:13 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-28 18:38:13 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2008-Apr-28 18:38:13 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2008-Apr-28 18:38:13 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-28 18:38:13 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-28 18:38:13 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Apr-28 18:38:13 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 18:38:13 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-28 18:38:13 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-28 18:38:13 LOG5 begin_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2008-Apr-28 18:38:13 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-28 18:38:13 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.671006 2008.3279302925444 18.999933 2008-Apr-28 18:38:13 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333336 2008-Apr-28 18:38:13 LOG4 log_alfabeam: ALFABEAM 1 9.709495808093774 21.847264887041899 2008-Apr-28 18:38:13 LOG4 log_alfabeam: ALFABEAM 2 9.715320989155058 21.792186745614327 2008-Apr-28 18:38:13 LOG4 log_alfabeam: ALFABEAM 3 9.722500915904881 21.827833758172879 2008-Apr-28 18:38:13 LOG4 log_alfabeam: ALFABEAM 4 9.723836731758677 21.919558571844870 2008-Apr-28 18:38:13 LOG4 log_alfabeam: ALFABEAM 5 9.717975214020747 21.974768961843846 2008-Apr-28 18:38:13 LOG4 log_alfabeam: ALFABEAM 6 9.710814418726423 21.938122793484595 2008-Apr-28 18:38:13 INFO2 take_spectra: Starting WAPP+GALFA scan: 811900071 2008-Apr-28 18:38:14 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-28 18:38:14 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-28 18:38:14 LOG5 begin_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2008-Apr-28 18:38:14 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-28 18:38:14 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Apr-28 18:38:14 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 18:38:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:38:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:38:14 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81495.00 2008-Apr-28 18:38:15 INFO5 check_wapp_levels: WAPP power levels are between 1.206 and 1.490 (still bad) 2008-Apr-28 18:38:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-28 18:38:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:38:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:38:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:38:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:38:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-28 18:38:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-28 18:38:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-28 18:38:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-28 18:38:17 INFO5 check_wapp_levels: WAPP power levels are between 1.203 and 1.486 (still bad) 2008-Apr-28 18:38:19 INFO5 check_wapp_levels: WAPP power levels are between 1.204 and 1.486 (still bad) 2008-Apr-28 18:38:21 INFO5 check_wapp_levels: WAPP power levels are between 1.205 and 1.486 (still bad) 2008-Apr-28 18:38:23 INFO5 check_wapp_levels: WAPP power levels are between 1.204 and 1.487 (still bad) 2008-Apr-28 18:38:25 INFO5 check_wapp_levels: WAPP power levels are between 1.203 and 1.486 (still bad) 2008-Apr-28 18:38:25 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-28 18:38:25 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-28 18:38:25 LOG5 end_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2008-Apr-28 18:38:25 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-28 18:38:25 LOG5 end_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2008-Apr-28 18:38:25 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2008-Apr-28 18:38:25 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2008-Apr-28 18:38:25 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2008-Apr-28 18:38:25 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-28 18:38:25 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32793 J 2008-Apr-28 18:38:25 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.5 2008-Apr-28 18:38:25 LOG2 antvel: Parameters to Doppler: Topocentric 81505 2008 119 0.0 2008-Apr-28 18:38:25 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-28 18:38:25 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2008-Apr-28 18:38:25 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2008-Apr-28 18:38:25 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-28 18:38:25 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-28 18:38:25 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Apr-28 18:38:25 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 18:38:25 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-28 18:38:25 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-28 18:38:25 LOG5 begin_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2008-Apr-28 18:38:25 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-28 18:38:25 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.674348 2008.3279306728014 18.999933 2008-Apr-28 18:38:25 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333333 2008-Apr-28 18:38:25 LOG4 log_alfabeam: ALFABEAM 1 9.709498052390321 21.847178707215562 2008-Apr-28 18:38:25 LOG4 log_alfabeam: ALFABEAM 2 9.715326603267838 21.792171000524228 2008-Apr-28 18:38:25 LOG4 log_alfabeam: ALFABEAM 3 9.722504349747069 21.827903149817462 2008-Apr-28 18:38:25 LOG4 log_alfabeam: ALFABEAM 4 9.723834466868894 21.919645457780543 2008-Apr-28 18:38:25 LOG4 log_alfabeam: ALFABEAM 5 9.717969452067493 21.974785177755120 2008-Apr-28 18:38:25 LOG4 log_alfabeam: ALFABEAM 6 9.710810986913334 21.938051087647011 2008-Apr-28 18:38:25 INFO2 take_spectra: Starting WAPP+GALFA scan: 811900072 2008-Apr-28 18:38:26 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-28 18:38:26 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-28 18:38:26 LOG5 begin_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2008-Apr-28 18:38:26 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-28 18:38:26 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Apr-28 18:38:26 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 18:38:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:38:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:38:26 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81507.00 2008-Apr-28 18:38:27 INFO5 check_wapp_levels: WAPP power levels are between 1.206 and 1.485 (still bad) 2008-Apr-28 18:38:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-28 18:38:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:38:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:38:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:38:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:38:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-28 18:38:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-28 18:38:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-28 18:38:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-28 18:38:29 INFO5 check_wapp_levels: WAPP power levels are between 1.203 and 1.483 (still bad) 2008-Apr-28 18:38:31 INFO5 check_wapp_levels: WAPP power levels are between 1.202 and 1.481 (still bad) 2008-Apr-28 18:38:33 INFO5 check_wapp_levels: WAPP power levels are between 1.202 and 1.482 (still bad) 2008-Apr-28 18:38:35 INFO5 check_wapp_levels: WAPP power levels are between 1.203 and 1.482 (still bad) 2008-Apr-28 18:38:37 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-28 18:38:37 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-28 18:38:37 LOG5 end_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2008-Apr-28 18:38:37 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-28 18:38:37 LOG5 end_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2008-Apr-28 18:38:37 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2008-Apr-28 18:38:37 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2008-Apr-28 18:38:37 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2008-Apr-28 18:38:37 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-28 18:38:37 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32793 J 2008-Apr-28 18:38:37 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.5 2008-Apr-28 18:38:37 LOG2 antvel: Parameters to Doppler: Topocentric 81517 2008 119 0.0 2008-Apr-28 18:38:37 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-28 18:38:37 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2008-Apr-28 18:38:37 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2008-Apr-28 18:38:37 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-28 18:38:37 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-28 18:38:37 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Apr-28 18:38:37 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 18:38:37 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-28 18:38:37 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-28 18:38:37 LOG5 begin_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2008-Apr-28 18:38:37 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-28 18:38:37 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.677691 2008.3279310530586 18.999933 2008-Apr-28 18:38:37 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333340 2008-Apr-28 18:38:37 LOG4 log_alfabeam: ALFABEAM 1 9.709500313802588 21.847092104206148 2008-Apr-28 18:38:37 LOG4 log_alfabeam: ALFABEAM 2 9.715332247649201 21.792155241028357 2008-Apr-28 18:38:37 LOG4 log_alfabeam: ALFABEAM 3 9.722507797242420 21.827972945017681 2008-Apr-28 18:38:37 LOG4 log_alfabeam: ALFABEAM 4 9.723832184646737 21.919732770749984 2008-Apr-28 18:38:37 LOG4 log_alfabeam: ALFABEAM 5 9.717963658881995 21.974801407985865 2008-Apr-28 18:38:37 LOG4 log_alfabeam: ALFABEAM 6 9.710807541710681 21.937978963961736 2008-Apr-28 18:38:37 INFO2 take_spectra: Starting WAPP+GALFA scan: 811900073 2008-Apr-28 18:38:38 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-28 18:38:38 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-28 18:38:38 LOG5 begin_task: Level: (4) ID = <10056> Status = 0 0 0 0 ok 2008-Apr-28 18:38:38 INFO5 check_wapp_levels: WAPP power levels are between 1.202 and 1.480 (still bad) 2008-Apr-28 18:38:38 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-28 18:38:38 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Apr-28 18:38:38 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 18:38:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:38:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:38:38 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81519.00 2008-Apr-28 18:38:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-28 18:38:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:38:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:38:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:38:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:38:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-28 18:38:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-28 18:38:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-28 18:38:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-28 18:38:40 INFO5 check_wapp_levels: WAPP power levels are between 1.202 and 1.480 (still bad) 2008-Apr-28 18:38:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.481 > 1.4)! 2008-Apr-28 18:38:42 LOG4 check_wapp_levels: WAPP-1 power levels: 1.242 1.263 1.205 1.203 2008-Apr-28 18:38:42 LOG4 check_wapp_levels: WAPP-2 power levels: 1.413 1.357 1.391 1.481 2008-Apr-28 18:38:42 LOG4 check_wapp_levels: WAPP-3 power levels: 1.326 1.375 1.442 1.231 2008-Apr-28 18:38:42 LOG4 check_wapp_levels: WAPP-4 power levels: 1.440 1.445 1.254 1.284 2008-Apr-28 18:38:44 INFO5 check_wapp_levels: WAPP power levels are between 1.204 and 1.481 (still bad) 2008-Apr-28 18:38:46 INFO5 check_wapp_levels: WAPP power levels are between 1.202 and 1.480 (still bad) 2008-Apr-28 18:38:48 INFO5 check_wapp_levels: WAPP power levels are between 1.205 and 1.482 (still bad) 2008-Apr-28 18:38:49 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-28 18:38:49 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-28 18:38:49 LOG5 end_task: Level: (4) ID = <10056> Status = 0 0 0 0 ok 2008-Apr-28 18:38:49 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-28 18:38:49 LOG5 end_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2008-Apr-28 18:38:49 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2008-Apr-28 18:38:49 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2008-Apr-28 18:38:49 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2008-Apr-28 18:38:49 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-28 18:38:49 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32793 J 2008-Apr-28 18:38:49 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.5 2008-Apr-28 18:38:49 LOG2 antvel: Parameters to Doppler: Topocentric 81529 2008 119 0.0 2008-Apr-28 18:38:49 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-28 18:38:49 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2008-Apr-28 18:38:49 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2008-Apr-28 18:38:49 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-28 18:38:49 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-28 18:38:49 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Apr-28 18:38:49 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 18:38:49 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-28 18:38:49 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-28 18:38:49 LOG5 begin_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2008-Apr-28 18:38:49 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-28 18:38:49 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.681033 2008.3279314333156 18.999933 2008-Apr-28 18:38:49 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333333 2008-Apr-28 18:38:49 LOG4 log_alfabeam: ALFABEAM 1 9.709502591155122 21.847005126484600 2008-Apr-28 18:38:49 LOG4 log_alfabeam: ALFABEAM 2 9.715337919180309 21.792139476874159 2008-Apr-28 18:38:49 LOG4 log_alfabeam: ALFABEAM 3 9.722511256414055 21.828043105646231 2008-Apr-28 18:38:49 LOG4 log_alfabeam: ALFABEAM 4 9.723829886277608 21.919820461883866 2008-Apr-28 18:38:49 LOG4 log_alfabeam: ALFABEAM 5 9.717957837663807 21.974817642478005 2008-Apr-28 18:38:49 LOG4 log_alfabeam: ALFABEAM 6 9.710804085098497 21.937906461832899 2008-Apr-28 18:38:49 INFO2 take_spectra: Starting WAPP+GALFA scan: 811900074 2008-Apr-28 18:38:50 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-28 18:38:50 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-28 18:38:50 LOG5 begin_task: Level: (4) ID = <10058> Status = 0 0 0 0 ok 2008-Apr-28 18:38:50 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-28 18:38:50 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Apr-28 18:38:50 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 18:38:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:38:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:38:50 INFO5 check_wapp_levels: WAPP power levels are between 1.203 and 1.480 (still bad) 2008-Apr-28 18:38:50 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81531.00 2008-Apr-28 18:38:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-28 18:38:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:38:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:38:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:38:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:38:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-28 18:38:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-28 18:38:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-28 18:38:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-28 18:38:52 INFO5 check_wapp_levels: WAPP power levels are between 1.203 and 1.480 (still bad) 2008-Apr-28 18:38:54 INFO5 check_wapp_levels: WAPP power levels are between 1.204 and 1.479 (still bad) 2008-Apr-28 18:38:56 INFO5 check_wapp_levels: WAPP power levels are between 1.204 and 1.479 (still bad) 2008-Apr-28 18:38:58 INFO5 check_wapp_levels: WAPP power levels are between 1.204 and 1.479 (still bad) 2008-Apr-28 18:39:00 INFO5 check_wapp_levels: WAPP power levels are between 1.203 and 1.480 (still bad) 2008-Apr-28 18:39:01 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-28 18:39:01 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-28 18:39:01 LOG5 end_task: Level: (4) ID = <10058> Status = 0 0 0 0 ok 2008-Apr-28 18:39:01 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-28 18:39:01 LOG5 end_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2008-Apr-28 18:39:01 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2008-Apr-28 18:39:01 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2008-Apr-28 18:39:01 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2008-Apr-28 18:39:01 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-28 18:39:01 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-28 18:39:01 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-28 18:39:01 LOG5 begin_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2008-Apr-28 18:39:01 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-28 18:39:01 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-28 18:39:01 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-28 18:39:01 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-28 18:39:01 LOG5 end_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2008-Apr-28 18:39:01 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2008-Apr-28 18:39:01 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2008-Apr-28 18:39:01 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2008-Apr-28 18:39:01 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2008-Apr-28 18:39:01 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-28 18:39:01 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32793 J 2008-Apr-28 18:39:01 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.5 2008-Apr-28 18:39:01 LOG2 antvel: Parameters to Doppler: Topocentric 81541 2008 119 0.0 2008-Apr-28 18:39:01 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-28 18:39:01 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2008-Apr-28 18:39:01 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2008-Apr-28 18:39:01 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-28 18:39:01 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-28 18:39:01 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Apr-28 18:39:01 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 18:39:01 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-28 18:39:01 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-28 18:39:01 LOG5 begin_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2008-Apr-28 18:39:01 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-28 18:39:01 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.684375 2008.3279318135726 18.999933 2008-Apr-28 18:39:01 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333347 2008-Apr-28 18:39:01 LOG4 log_alfabeam: ALFABEAM 1 9.709504885301781 21.846917744829184 2008-Apr-28 18:39:01 LOG4 log_alfabeam: ALFABEAM 2 9.715343619806232 21.792123703677149 2008-Apr-28 18:39:01 LOG4 log_alfabeam: ALFABEAM 3 9.722514728377588 21.828113656196244 2008-Apr-28 18:39:01 LOG4 log_alfabeam: ALFABEAM 4 9.723827570898891 21.919908560642359 2008-Apr-28 18:39:01 LOG4 log_alfabeam: ALFABEAM 5 9.717951986415065 21.974833885727254 2008-Apr-28 18:39:01 LOG4 log_alfabeam: ALFABEAM 6 9.710800615966415 21.937833555955468 2008-Apr-28 18:39:01 INFO2 take_spectra: Starting WAPP+GALFA scan: 811900075 2008-Apr-28 18:39:02 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-28 18:39:02 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-28 18:39:02 LOG5 begin_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2008-Apr-28 18:39:02 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-28 18:39:02 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Apr-28 18:39:02 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 18:39:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:39:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:39:02 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81543.00 2008-Apr-28 18:39:02 INFO5 check_wapp_levels: WAPP power levels are between 1.201 and 1.479 (still bad) 2008-Apr-28 18:39:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-28 18:39:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:39:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:39:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:39:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:39:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-28 18:39:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-28 18:39:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-28 18:39:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-28 18:39:04 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.918 and 1.121 2008-Apr-28 18:39:13 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-28 18:39:13 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-28 18:39:13 LOG5 end_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2008-Apr-28 18:39:13 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-28 18:39:13 LOG5 end_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2008-Apr-28 18:39:13 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2008-Apr-28 18:39:13 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2008-Apr-28 18:39:13 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2008-Apr-28 18:39:13 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-28 18:39:13 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32793 J 2008-Apr-28 18:39:13 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.5 2008-Apr-28 18:39:13 LOG2 antvel: Parameters to Doppler: Topocentric 81553 2008 119 0.0 2008-Apr-28 18:39:13 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-28 18:39:13 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2008-Apr-28 18:39:13 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2008-Apr-28 18:39:13 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-28 18:39:13 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-28 18:39:13 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Apr-28 18:39:13 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 18:39:13 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-28 18:39:13 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-28 18:39:13 LOG5 begin_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2008-Apr-28 18:39:13 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-28 18:39:13 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.687718 2008.3279321938296 18.999933 2008-Apr-28 18:39:13 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333336 2008-Apr-28 18:39:13 LOG4 log_alfabeam: ALFABEAM 1 9.709507197119050 21.846829929498458 2008-Apr-28 18:39:13 LOG4 log_alfabeam: ALFABEAM 2 9.715349351509930 21.792107917051290 2008-Apr-28 18:39:13 LOG4 log_alfabeam: ALFABEAM 3 9.722518214264573 21.828184621672936 2008-Apr-28 18:39:13 LOG4 log_alfabeam: ALFABEAM 4 9.723825237625062 21.919997097009883 2008-Apr-28 18:39:13 LOG4 log_alfabeam: ALFABEAM 5 9.717946103098804 21.974850142229755 2008-Apr-28 18:39:13 LOG4 log_alfabeam: ALFABEAM 6 9.710797133188542 21.937760220494464 2008-Apr-28 18:39:13 INFO2 take_spectra: Starting WAPP+GALFA scan: 811900076 2008-Apr-28 18:39:14 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-28 18:39:14 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-28 18:39:14 LOG5 begin_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2008-Apr-28 18:39:14 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-28 18:39:14 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Apr-28 18:39:14 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 18:39:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:39:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:39:14 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81555.00 2008-Apr-28 18:39:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-28 18:39:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:39:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:39:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:39:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:39:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-28 18:39:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-28 18:39:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-28 18:39:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-28 18:39:25 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-28 18:39:25 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-28 18:39:25 LOG5 end_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2008-Apr-28 18:39:25 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-28 18:39:25 LOG5 end_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2008-Apr-28 18:39:25 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2008-Apr-28 18:39:25 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2008-Apr-28 18:39:25 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2008-Apr-28 18:39:25 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-28 18:39:25 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32793 J 2008-Apr-28 18:39:25 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.5 2008-Apr-28 18:39:25 LOG2 antvel: Parameters to Doppler: Topocentric 81565 2008 119 0.0 2008-Apr-28 18:39:25 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-28 18:39:25 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2008-Apr-28 18:39:25 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2008-Apr-28 18:39:25 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-28 18:39:25 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-28 18:39:25 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Apr-28 18:39:25 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 18:39:25 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-28 18:39:25 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-28 18:39:25 LOG5 begin_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2008-Apr-28 18:39:25 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-28 18:39:25 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.691060 2008.3279325740866 18.999933 2008-Apr-28 18:39:25 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666665 21.883333333333329 2008-Apr-28 18:39:25 LOG4 log_alfabeam: ALFABEAM 1 9.709509525408812 21.846741729580089 2008-Apr-28 18:39:25 LOG4 log_alfabeam: ALFABEAM 2 9.715355111129474 21.792092126788521 2008-Apr-28 18:39:25 LOG4 log_alfabeam: ALFABEAM 3 9.722521712077032 21.828255963385079 2008-Apr-28 18:39:25 LOG4 log_alfabeam: ALFABEAM 4 9.723822887664440 21.920086021494519 2008-Apr-28 18:39:25 LOG4 log_alfabeam: ALFABEAM 5 9.717940190959023 21.974866401881467 2008-Apr-28 18:39:25 LOG4 log_alfabeam: ALFABEAM 6 9.710793638765750 21.937686495439092 2008-Apr-28 18:39:25 INFO2 take_spectra: Starting WAPP+GALFA scan: 811900077 2008-Apr-28 18:39:26 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-28 18:39:26 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-28 18:39:26 LOG5 begin_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2008-Apr-28 18:39:26 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-28 18:39:26 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Apr-28 18:39:26 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 18:39:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:39:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:39:26 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81567.00 2008-Apr-28 18:39:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-28 18:39:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:39:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:39:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:39:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:39:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-28 18:39:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-28 18:39:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-28 18:39:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-28 18:39:37 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-28 18:39:37 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-28 18:39:37 LOG5 end_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2008-Apr-28 18:39:37 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-28 18:39:37 LOG5 end_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2008-Apr-28 18:39:37 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2008-Apr-28 18:39:37 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2008-Apr-28 18:39:37 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2008-Apr-28 18:39:37 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-28 18:39:37 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32793 J 2008-Apr-28 18:39:37 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.5 2008-Apr-28 18:39:37 LOG2 antvel: Parameters to Doppler: Topocentric 81577 2008 119 0.0 2008-Apr-28 18:39:37 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-28 18:39:37 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2008-Apr-28 18:39:37 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2008-Apr-28 18:39:37 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-28 18:39:37 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-28 18:39:37 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Apr-28 18:39:37 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 18:39:37 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-28 18:39:37 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-28 18:39:37 LOG5 begin_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2008-Apr-28 18:39:37 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-28 18:39:37 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.694403 2008.3279329543439 18.999933 2008-Apr-28 18:39:37 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333340 2008-Apr-28 18:39:37 LOG4 log_alfabeam: ALFABEAM 1 9.709511871752046 21.846653088803642 2008-Apr-28 18:39:37 LOG4 log_alfabeam: ALFABEAM 2 9.715360902382093 21.792076323796501 2008-Apr-28 18:39:37 LOG4 log_alfabeam: ALFABEAM 3 9.722525223996399 21.828327727839902 2008-Apr-28 18:39:37 LOG4 log_alfabeam: ALFABEAM 4 9.723820519420396 21.920175390827534 2008-Apr-28 18:39:37 LOG4 log_alfabeam: ALFABEAM 5 9.717934246178521 21.974882674023799 2008-Apr-28 18:39:37 LOG4 log_alfabeam: ALFABEAM 6 9.710790130523497 21.937612332734439 2008-Apr-28 18:39:37 INFO2 take_spectra: Starting WAPP+GALFA scan: 811900078 2008-Apr-28 18:39:38 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-28 18:39:38 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-28 18:39:38 LOG5 begin_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2008-Apr-28 18:39:38 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-28 18:39:38 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Apr-28 18:39:38 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 18:39:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:39:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:39:38 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81579.00 2008-Apr-28 18:39:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-28 18:39:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:39:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:39:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:39:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:39:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-28 18:39:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-28 18:39:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-28 18:39:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-28 18:39:49 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-28 18:39:49 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-28 18:39:49 LOG5 end_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2008-Apr-28 18:39:49 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-28 18:39:49 LOG5 end_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2008-Apr-28 18:39:49 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2008-Apr-28 18:39:49 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2008-Apr-28 18:39:49 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2008-Apr-28 18:39:49 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-28 18:39:49 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32793 J 2008-Apr-28 18:39:49 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.5 2008-Apr-28 18:39:49 LOG2 antvel: Parameters to Doppler: Topocentric 81589 2008 119 0.0 2008-Apr-28 18:39:49 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-28 18:39:49 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2008-Apr-28 18:39:49 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2008-Apr-28 18:39:49 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-28 18:39:49 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-28 18:39:49 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Apr-28 18:39:49 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 18:39:49 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-28 18:39:49 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-28 18:39:49 LOG5 begin_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2008-Apr-28 18:39:49 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-28 18:39:49 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.697745 2008.3279333346009 18.999933 2008-Apr-28 18:39:49 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666665 21.883333333333329 2008-Apr-28 18:39:49 LOG4 log_alfabeam: ALFABEAM 1 9.709514234935204 21.846564056675870 2008-Apr-28 18:39:49 LOG4 log_alfabeam: ALFABEAM 2 9.715366722076579 21.792060517896843 2008-Apr-28 18:39:49 LOG4 log_alfabeam: ALFABEAM 3 9.722528748010394 21.828399875962397 2008-Apr-28 18:39:49 LOG4 log_alfabeam: ALFABEAM 4 9.723818134116877 21.920265155093702 2008-Apr-28 18:39:49 LOG4 log_alfabeam: ALFABEAM 5 9.717928272031525 21.974898948521940 2008-Apr-28 18:39:49 LOG4 log_alfabeam: ALFABEAM 6 9.710786610476806 21.937537772767747 2008-Apr-28 18:39:49 INFO2 take_spectra: Starting WAPP+GALFA scan: 811900079 2008-Apr-28 18:39:50 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-28 18:39:50 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-28 18:39:50 LOG5 begin_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2008-Apr-28 18:39:50 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-28 18:39:50 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Apr-28 18:39:50 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 18:39:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:39:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:39:50 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81591.00 2008-Apr-28 18:39:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-28 18:39:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:39:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:39:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:39:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:39:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-28 18:39:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-28 18:39:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-28 18:39:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-28 18:40:01 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-28 18:40:01 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-28 18:40:01 LOG5 end_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2008-Apr-28 18:40:01 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-28 18:40:01 LOG5 end_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2008-Apr-28 18:40:01 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2008-Apr-28 18:40:01 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2008-Apr-28 18:40:01 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2008-Apr-28 18:40:01 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-28 18:40:01 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32793 J 2008-Apr-28 18:40:01 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.5 2008-Apr-28 18:40:01 LOG2 antvel: Parameters to Doppler: Topocentric 81601 2008 119 0.0 2008-Apr-28 18:40:01 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-28 18:40:01 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2008-Apr-28 18:40:01 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2008-Apr-28 18:40:01 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-28 18:40:01 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-28 18:40:01 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Apr-28 18:40:01 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 18:40:01 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-28 18:40:01 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-28 18:40:01 LOG5 begin_task: Level: (3) ID = <10070> Status = 0 0 0 0 ok 2008-Apr-28 18:40:01 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-28 18:40:01 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.701088 2008.3279337148579 18.999933 2008-Apr-28 18:40:01 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333336 2008-Apr-28 18:40:01 LOG4 log_alfabeam: ALFABEAM 1 9.709516616565462 21.846474576352708 2008-Apr-28 18:40:01 LOG4 log_alfabeam: ALFABEAM 2 9.715372573972537 21.792044700008244 2008-Apr-28 18:40:01 LOG4 log_alfabeam: ALFABEAM 3 9.722532286317387 21.828472454838117 2008-Apr-28 18:40:01 LOG4 log_alfabeam: ALFABEAM 4 9.723815730130724 21.920355371603058 2008-Apr-28 18:40:01 LOG4 log_alfabeam: ALFABEAM 5 9.717922264657096 21.974915234704266 2008-Apr-28 18:40:01 LOG4 log_alfabeam: ALFABEAM 6 9.710783076434700 21.937462766886181 2008-Apr-28 18:40:01 INFO2 take_spectra: Starting WAPP+GALFA scan: 811900080 2008-Apr-28 18:40:02 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-28 18:40:02 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-28 18:40:02 LOG5 begin_task: Level: (4) ID = <10071> Status = 0 0 0 0 ok 2008-Apr-28 18:40:02 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-28 18:40:02 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Apr-28 18:40:02 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 18:40:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:40:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:40:02 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81603.00 2008-Apr-28 18:40:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-28 18:40:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:40:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:40:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:40:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:40:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-28 18:40:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-28 18:40:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-28 18:40:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-28 18:40:13 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-28 18:40:13 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-28 18:40:13 LOG5 end_task: Level: (4) ID = <10071> Status = 0 0 0 0 ok 2008-Apr-28 18:40:13 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-28 18:40:13 LOG5 end_task: Level: (3) ID = <10070> Status = 0 0 0 0 ok 2008-Apr-28 18:40:13 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2008-Apr-28 18:40:13 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2008-Apr-28 18:40:13 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2008-Apr-28 18:40:13 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-28 18:40:13 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32793 J 2008-Apr-28 18:40:13 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.5 2008-Apr-28 18:40:13 LOG2 antvel: Parameters to Doppler: Topocentric 81613 2008 119 0.0 2008-Apr-28 18:40:13 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-28 18:40:13 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2008-Apr-28 18:40:13 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2008-Apr-28 18:40:13 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-28 18:40:13 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-28 18:40:13 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Apr-28 18:40:13 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 18:40:13 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-28 18:40:13 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-28 18:40:13 LOG5 begin_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2008-Apr-28 18:40:13 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-28 18:40:13 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.704430 2008.3279340951149 18.999933 2008-Apr-28 18:40:13 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333340 2008-Apr-28 18:40:13 LOG4 log_alfabeam: ALFABEAM 1 9.709519015413559 21.846384697766485 2008-Apr-28 18:40:13 LOG4 log_alfabeam: ALFABEAM 2 9.715378454848993 21.792028879982141 2008-Apr-28 18:40:13 LOG4 log_alfabeam: ALFABEAM 3 9.722535836890579 21.828545425001977 2008-Apr-28 18:40:13 LOG4 log_alfabeam: ALFABEAM 4 9.723813308701782 21.920445990010645 2008-Apr-28 18:40:13 LOG4 log_alfabeam: ALFABEAM 5 9.717916227360208 21.974931522405193 2008-Apr-28 18:40:13 LOG4 log_alfabeam: ALFABEAM 6 9.710779530426548 21.937387355881629 2008-Apr-28 18:40:13 INFO2 take_spectra: Starting WAPP+GALFA scan: 811900081 2008-Apr-28 18:40:14 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-28 18:40:14 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-28 18:40:14 LOG5 begin_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2008-Apr-28 18:40:14 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-28 18:40:14 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Apr-28 18:40:14 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 18:40:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:40:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:40:14 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81615.00 2008-Apr-28 18:40:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-28 18:40:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:40:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:40:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:40:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:40:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-28 18:40:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-28 18:40:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-28 18:40:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-28 18:40:25 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-28 18:40:25 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-28 18:40:25 LOG5 end_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2008-Apr-28 18:40:25 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-28 18:40:25 LOG5 end_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2008-Apr-28 18:40:25 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2008-Apr-28 18:40:25 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-28 18:40:25 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-28 18:40:25 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-28 18:40:25 LOG5 begin_task: Level: (3) ID = <10074> Status = 0 0 0 0 ok 2008-Apr-28 18:40:25 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-28 18:40:25 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-28 18:40:25 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-28 18:40:25 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-28 18:40:25 LOG5 end_task: Level: (3) ID = <10074> Status = 0 0 0 0 ok 2008-Apr-28 18:40:25 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2008-Apr-28 18:40:25 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2008-Apr-28 18:40:25 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2008-Apr-28 18:40:25 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-28 18:40:25 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32793 J 2008-Apr-28 18:40:25 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.5 2008-Apr-28 18:40:25 LOG2 antvel: Parameters to Doppler: Topocentric 81625 2008 119 0.0 2008-Apr-28 18:40:25 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-28 18:40:25 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2008-Apr-28 18:40:25 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2008-Apr-28 18:40:25 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-28 18:40:25 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-28 18:40:25 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Apr-28 18:40:25 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 18:40:25 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-28 18:40:25 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-28 18:40:25 LOG5 begin_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2008-Apr-28 18:40:25 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-28 18:40:25 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.707773 2008.3279344753721 18.999933 2008-Apr-28 18:40:25 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333329 2008-Apr-28 18:40:25 LOG4 log_alfabeam: ALFABEAM 1 9.709521433113496 21.846294363488941 2008-Apr-28 18:40:25 LOG4 log_alfabeam: ALFABEAM 2 9.715384368508769 21.792013048750142 2008-Apr-28 18:40:25 LOG4 log_alfabeam: ALFABEAM 3 9.722539401945509 21.828618834130122 2008-Apr-28 18:40:25 LOG4 log_alfabeam: ALFABEAM 4 9.723810868179694 21.920537068215662 2008-Apr-28 18:40:25 LOG4 log_alfabeam: ALFABEAM 5 9.717910156235279 21.974947820938052 2008-Apr-28 18:40:25 LOG4 log_alfabeam: ALFABEAM 6 9.710775970244747 21.937311490490647 2008-Apr-28 18:40:25 INFO2 take_spectra: Starting WAPP+GALFA scan: 811900082 2008-Apr-28 18:40:26 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-28 18:40:26 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-28 18:40:26 LOG5 begin_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2008-Apr-28 18:40:26 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-28 18:40:26 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Apr-28 18:40:26 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 18:40:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:40:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:40:26 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81627.00 2008-Apr-28 18:40:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-28 18:40:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:40:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:40:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:40:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:40:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-28 18:40:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-28 18:40:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-28 18:40:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-28 18:40:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.538 > 1.4)! 2008-Apr-28 18:40:30 LOG4 check_wapp_levels: WAPP-1 power levels: 1.300 1.279 1.269 1.221 2008-Apr-28 18:40:30 LOG4 check_wapp_levels: WAPP-2 power levels: 1.434 1.401 1.474 1.512 2008-Apr-28 18:40:30 LOG4 check_wapp_levels: WAPP-3 power levels: 1.387 1.405 1.538 1.281 2008-Apr-28 18:40:30 LOG4 check_wapp_levels: WAPP-4 power levels: 1.474 1.458 1.282 1.296 2008-Apr-28 18:40:32 INFO5 check_wapp_levels: WAPP power levels are between 1.220 and 1.542 (still bad) 2008-Apr-28 18:40:34 INFO5 check_wapp_levels: WAPP power levels are between 1.222 and 1.540 (still bad) 2008-Apr-28 18:40:36 INFO5 check_wapp_levels: WAPP power levels are between 1.222 and 1.539 (still bad) 2008-Apr-28 18:40:37 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-28 18:40:37 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-28 18:40:37 LOG5 end_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2008-Apr-28 18:40:37 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-28 18:40:37 LOG5 end_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2008-Apr-28 18:40:37 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2008-Apr-28 18:40:37 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2008-Apr-28 18:40:37 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2008-Apr-28 18:40:37 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-28 18:40:37 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32793 J 2008-Apr-28 18:40:37 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.5 2008-Apr-28 18:40:37 LOG2 antvel: Parameters to Doppler: Topocentric 81637 2008 119 0.0 2008-Apr-28 18:40:37 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-28 18:40:37 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2008-Apr-28 18:40:37 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2008-Apr-28 18:40:37 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-28 18:40:37 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-28 18:40:37 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Apr-28 18:40:37 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 18:40:37 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-28 18:40:37 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-28 18:40:37 LOG5 begin_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2008-Apr-28 18:40:37 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-28 18:40:37 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.711115 2008.3279348556291 18.999933 2008-Apr-28 18:40:37 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333340 2008-Apr-28 18:40:37 LOG4 log_alfabeam: ALFABEAM 1 9.709523868420000 21.846203623884815 2008-Apr-28 18:40:37 LOG4 log_alfabeam: ALFABEAM 2 9.715390311700657 21.791997216193469 2008-Apr-28 18:40:37 LOG4 log_alfabeam: ALFABEAM 3 9.722542979440657 21.828692642360870 2008-Apr-28 18:40:37 LOG4 log_alfabeam: ALFABEAM 4 9.723808409820510 21.920628555436675 2008-Apr-28 18:40:37 LOG4 log_alfabeam: ALFABEAM 5 9.717904054618515 21.974964120106371 2008-Apr-28 18:40:37 LOG4 log_alfabeam: ALFABEAM 6 9.710772397933196 21.937235211916430 2008-Apr-28 18:40:37 INFO2 take_spectra: Starting WAPP+GALFA scan: 811900083 2008-Apr-28 18:40:38 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-28 18:40:38 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-28 18:40:38 LOG5 begin_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2008-Apr-28 18:40:38 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-28 18:40:38 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Apr-28 18:40:38 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 18:40:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:40:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:40:38 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81639.00 2008-Apr-28 18:40:39 INFO5 check_wapp_levels: WAPP power levels are between 1.222 and 1.542 (still bad) 2008-Apr-28 18:40:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-28 18:40:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:40:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:40:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:40:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:40:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-28 18:40:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-28 18:40:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-28 18:40:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-28 18:40:41 INFO5 check_wapp_levels: WAPP power levels are between 1.202 and 1.479 (still bad) 2008-Apr-28 18:40:43 INFO5 check_wapp_levels: WAPP power levels are between 1.205 and 1.479 (still bad) 2008-Apr-28 18:40:45 INFO5 check_wapp_levels: WAPP power levels are between 1.203 and 1.479 (still bad) 2008-Apr-28 18:40:47 INFO5 check_wapp_levels: WAPP power levels are between 1.202 and 1.478 (still bad) 2008-Apr-28 18:40:49 INFO5 check_wapp_levels: WAPP power levels are between 1.201 and 1.478 (still bad) 2008-Apr-28 18:40:49 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-28 18:40:49 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-28 18:40:49 LOG5 end_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2008-Apr-28 18:40:49 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-28 18:40:49 LOG5 end_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2008-Apr-28 18:40:49 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2008-Apr-28 18:40:49 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2008-Apr-28 18:40:49 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2008-Apr-28 18:40:49 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-28 18:40:49 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32794 J 2008-Apr-28 18:40:49 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.5 2008-Apr-28 18:40:49 LOG2 antvel: Parameters to Doppler: Topocentric 81649 2008 119 0.0 2008-Apr-28 18:40:49 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-28 18:40:49 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2008-Apr-28 18:40:49 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2008-Apr-28 18:40:49 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-28 18:40:49 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-28 18:40:49 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Apr-28 18:40:49 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 18:40:49 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-28 18:40:49 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-28 18:40:49 LOG5 begin_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2008-Apr-28 18:40:49 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-28 18:40:49 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.714458 2008.3279352358861 18.999933 2008-Apr-28 18:40:49 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333333 2008-Apr-28 18:40:49 LOG4 log_alfabeam: ALFABEAM 1 9.709526322994588 21.846112420930808 2008-Apr-28 18:40:49 LOG4 log_alfabeam: ALFABEAM 2 9.715396288271574 21.791981373258729 2008-Apr-28 18:40:49 LOG4 log_alfabeam: ALFABEAM 3 9.722546571608952 21.828766897973601 2008-Apr-28 18:40:49 LOG4 log_alfabeam: ALFABEAM 4 9.723805931946004 21.920720510172970 2008-Apr-28 18:40:49 LOG4 log_alfabeam: ALFABEAM 5 9.717897918558839 21.974980429206305 2008-Apr-28 18:40:49 LOG4 log_alfabeam: ALFABEAM 6 9.710768811267467 21.937158470271939 2008-Apr-28 18:40:49 INFO2 take_spectra: Starting WAPP+GALFA scan: 811900084 2008-Apr-28 18:40:50 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-28 18:40:50 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-28 18:40:50 LOG5 begin_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2008-Apr-28 18:40:50 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-28 18:40:50 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Apr-28 18:40:50 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 18:40:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:40:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:40:50 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81651.00 2008-Apr-28 18:40:51 INFO5 check_wapp_levels: WAPP power levels are between 1.201 and 1.478 (still bad) 2008-Apr-28 18:40:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-28 18:40:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:40:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:40:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:40:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:40:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-28 18:40:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-28 18:40:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-28 18:40:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-28 18:40:53 INFO5 check_wapp_levels: WAPP power levels are between 1.201 and 1.476 (still bad) 2008-Apr-28 18:40:55 INFO5 check_wapp_levels: WAPP power levels are between 1.201 and 1.476 (still bad) 2008-Apr-28 18:40:57 INFO5 check_wapp_levels: WAPP power levels are between 1.203 and 1.476 (still bad) 2008-Apr-28 18:40:59 INFO5 check_wapp_levels: WAPP power levels are between 1.200 and 1.476 (still bad) 2008-Apr-28 18:41:01 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-28 18:41:01 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-28 18:41:01 LOG5 end_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2008-Apr-28 18:41:01 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-28 18:41:01 LOG5 end_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2008-Apr-28 18:41:01 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2008-Apr-28 18:41:01 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2008-Apr-28 18:41:01 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2008-Apr-28 18:41:01 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-28 18:41:01 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32794 J 2008-Apr-28 18:41:01 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.5 2008-Apr-28 18:41:01 LOG2 antvel: Parameters to Doppler: Topocentric 81661 2008 119 0.0 2008-Apr-28 18:41:01 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-28 18:41:01 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2008-Apr-28 18:41:01 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2008-Apr-28 18:41:01 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-28 18:41:01 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-28 18:41:01 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Apr-28 18:41:01 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 18:41:01 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-28 18:41:01 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-28 18:41:01 LOG5 begin_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2008-Apr-28 18:41:01 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-28 18:41:01 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.717800 2008.3279356161431 18.999933 2008-Apr-28 18:41:01 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666665 21.883333333333336 2008-Apr-28 18:41:01 LOG4 log_alfabeam: ALFABEAM 1 9.709528795575702 21.846020805430758 2008-Apr-28 18:41:01 LOG4 log_alfabeam: ALFABEAM 2 9.715402294939569 21.791965529857062 2008-Apr-28 18:41:01 LOG4 log_alfabeam: ALFABEAM 3 9.722550176393945 21.828841560703435 2008-Apr-28 18:41:01 LOG4 log_alfabeam: ALFABEAM 4 9.723803435828721 21.920812881199794 2008-Apr-28 18:41:01 LOG4 log_alfabeam: ALFABEAM 5 9.717891751424181 21.974996738010439 2008-Apr-28 18:41:01 LOG4 log_alfabeam: ALFABEAM 6 9.710765212306214 21.937081307178676 2008-Apr-28 18:41:01 INFO2 take_spectra: Starting WAPP+GALFA scan: 811900085 2008-Apr-28 18:41:02 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-28 18:41:02 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-28 18:41:02 LOG5 begin_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2008-Apr-28 18:41:02 INFO5 check_wapp_levels: WAPP power levels are between 1.199 and 1.476 (still bad) 2008-Apr-28 18:41:02 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-28 18:41:02 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Apr-28 18:41:02 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 18:41:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:41:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:41:02 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81663.00 2008-Apr-28 18:41:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-28 18:41:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:41:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:41:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:41:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:41:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-28 18:41:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-28 18:41:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-28 18:41:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-28 18:41:04 INFO5 check_wapp_levels: WAPP power levels are between 1.198 and 1.472 (still bad) 2008-Apr-28 18:41:06 INFO5 check_wapp_levels: WAPP power levels are between 1.199 and 1.470 (still bad) 2008-Apr-28 18:41:08 INFO5 check_wapp_levels: WAPP power levels are between 1.198 and 1.470 (still bad) 2008-Apr-28 18:41:10 INFO5 check_wapp_levels: WAPP power levels are between 1.198 and 1.471 (still bad) 2008-Apr-28 18:41:12 INFO5 check_wapp_levels: WAPP power levels are between 1.198 and 1.470 (still bad) 2008-Apr-28 18:41:13 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-28 18:41:13 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-28 18:41:13 LOG5 end_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2008-Apr-28 18:41:13 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-28 18:41:13 LOG5 end_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2008-Apr-28 18:41:13 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2008-Apr-28 18:41:13 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2008-Apr-28 18:41:13 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2008-Apr-28 18:41:13 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-28 18:41:13 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32794 J 2008-Apr-28 18:41:13 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.5 2008-Apr-28 18:41:13 LOG2 antvel: Parameters to Doppler: Topocentric 81673 2008 119 0.0 2008-Apr-28 18:41:13 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-28 18:41:13 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2008-Apr-28 18:41:13 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2008-Apr-28 18:41:13 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-28 18:41:13 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-28 18:41:13 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Apr-28 18:41:13 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 18:41:13 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-28 18:41:13 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-28 18:41:13 LOG5 begin_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2008-Apr-28 18:41:13 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-28 18:41:13 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.721142 2008.3279359964001 18.999933 2008-Apr-28 18:41:13 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666663 21.883333333333333 2008-Apr-28 18:41:13 LOG4 log_alfabeam: ALFABEAM 1 9.709531287104639 21.845928746368408 2008-Apr-28 18:41:13 LOG4 log_alfabeam: ALFABEAM 2 9.715408333784758 21.791949681694778 2008-Apr-28 18:41:13 LOG4 log_alfabeam: ALFABEAM 3 9.722553794961367 21.828916656910195 2008-Apr-28 18:41:13 LOG4 log_alfabeam: ALFABEAM 4 9.723800920517403 21.920905699786715 2008-Apr-28 18:41:13 LOG4 log_alfabeam: ALFABEAM 5 9.717885551077314 21.975013050913759 2008-Apr-28 18:41:13 LOG4 log_alfabeam: ALFABEAM 6 9.710761599890883 21.937003695403263 2008-Apr-28 18:41:13 INFO2 take_spectra: Starting WAPP+GALFA scan: 811900086 2008-Apr-28 18:41:14 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-28 18:41:14 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-28 18:41:14 LOG5 begin_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2008-Apr-28 18:41:14 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-28 18:41:14 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Apr-28 18:41:14 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 18:41:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:41:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:41:14 INFO5 check_wapp_levels: WAPP power levels are between 1.198 and 1.471 (still bad) 2008-Apr-28 18:41:14 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81675.00 2008-Apr-28 18:41:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-28 18:41:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:41:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:41:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:41:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:41:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-28 18:41:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-28 18:41:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-28 18:41:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-28 18:41:16 INFO5 check_wapp_levels: WAPP power levels are between 1.197 and 1.467 (still bad) 2008-Apr-28 18:41:18 INFO5 check_wapp_levels: WAPP power levels are between 1.197 and 1.468 (still bad) 2008-Apr-28 18:41:20 INFO5 check_wapp_levels: WAPP power levels are between 1.198 and 1.468 (still bad) 2008-Apr-28 18:41:22 INFO5 check_wapp_levels: WAPP power levels are between 1.196 and 1.467 (still bad) 2008-Apr-28 18:41:24 INFO5 check_wapp_levels: WAPP power levels are between 1.195 and 1.467 (still bad) 2008-Apr-28 18:41:25 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-28 18:41:25 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-28 18:41:25 LOG5 end_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2008-Apr-28 18:41:25 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-28 18:41:25 LOG5 end_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2008-Apr-28 18:41:25 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2008-Apr-28 18:41:25 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2008-Apr-28 18:41:25 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2008-Apr-28 18:41:25 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-28 18:41:25 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32794 J 2008-Apr-28 18:41:25 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.5 2008-Apr-28 18:41:25 LOG2 antvel: Parameters to Doppler: Topocentric 81685 2008 119 0.0 2008-Apr-28 18:41:25 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-28 18:41:25 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2008-Apr-28 18:41:25 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2008-Apr-28 18:41:25 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-28 18:41:25 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-28 18:41:25 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Apr-28 18:41:25 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 18:41:25 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-28 18:41:25 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-28 18:41:25 LOG5 begin_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2008-Apr-28 18:41:25 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-28 18:41:25 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.724485 2008.3279363766574 18.999933 2008-Apr-28 18:41:25 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333333 2008-Apr-28 18:41:25 LOG4 log_alfabeam: ALFABEAM 1 9.709533798548412 21.845836212154886 2008-Apr-28 18:41:25 LOG4 log_alfabeam: ALFABEAM 2 9.715414406929355 21.791933824484683 2008-Apr-28 18:41:25 LOG4 log_alfabeam: ALFABEAM 3 9.722557428494103 21.828992213526288 2008-Apr-28 18:41:25 LOG4 log_alfabeam: ALFABEAM 4 9.723798385034790 21.920998997780980 2008-Apr-28 18:41:25 LOG4 log_alfabeam: ALFABEAM 5 9.717879315337582 21.975029372303126 2008-Apr-28 18:41:25 LOG4 log_alfabeam: ALFABEAM 6 9.710757972846295 21.936925607120273 2008-Apr-28 18:41:25 INFO2 take_spectra: Starting WAPP+GALFA scan: 811900087 2008-Apr-28 18:41:26 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-28 18:41:26 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-28 18:41:26 LOG5 begin_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2008-Apr-28 18:41:26 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-28 18:41:26 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Apr-28 18:41:26 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 18:41:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:41:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:41:26 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81687.00 2008-Apr-28 18:41:27 INFO5 check_wapp_levels: WAPP power levels are between 1.195 and 1.466 (still bad) 2008-Apr-28 18:41:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-28 18:41:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:41:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:41:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:41:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:41:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-28 18:41:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-28 18:41:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-28 18:41:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-28 18:41:29 INFO5 check_wapp_levels: WAPP power levels are between 1.196 and 1.467 (still bad) 2008-Apr-28 18:41:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.466 > 1.4)! 2008-Apr-28 18:41:31 LOG4 check_wapp_levels: WAPP-1 power levels: 1.233 1.253 1.200 1.197 2008-Apr-28 18:41:31 LOG4 check_wapp_levels: WAPP-2 power levels: 1.407 1.351 1.378 1.466 2008-Apr-28 18:41:31 LOG4 check_wapp_levels: WAPP-3 power levels: 1.309 1.359 1.433 1.226 2008-Apr-28 18:41:31 LOG4 check_wapp_levels: WAPP-4 power levels: 1.436 1.438 1.252 1.278 2008-Apr-28 18:41:33 INFO5 check_wapp_levels: WAPP power levels are between 1.198 and 1.466 (still bad) 2008-Apr-28 18:41:35 INFO5 check_wapp_levels: WAPP power levels are between 1.198 and 1.467 (still bad) 2008-Apr-28 18:41:37 INFO5 check_wapp_levels: WAPP power levels are between 1.198 and 1.466 (still bad) 2008-Apr-28 18:41:37 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-28 18:41:37 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-28 18:41:37 LOG5 end_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2008-Apr-28 18:41:37 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-28 18:41:37 LOG5 end_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2008-Apr-28 18:41:37 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2008-Apr-28 18:41:37 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2008-Apr-28 18:41:37 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2008-Apr-28 18:41:37 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-28 18:41:37 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32794 J 2008-Apr-28 18:41:37 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.5 2008-Apr-28 18:41:37 LOG2 antvel: Parameters to Doppler: Topocentric 81697 2008 119 0.0 2008-Apr-28 18:41:37 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-28 18:41:37 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2008-Apr-28 18:41:37 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2008-Apr-28 18:41:37 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-28 18:41:37 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-28 18:41:37 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Apr-28 18:41:37 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 18:41:37 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-28 18:41:37 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-28 18:41:37 LOG5 begin_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2008-Apr-28 18:41:37 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-28 18:41:37 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.727827 2008.3279367569144 18.999933 2008-Apr-28 18:41:37 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333322 2008-Apr-28 18:41:37 LOG4 log_alfabeam: ALFABEAM 1 9.709536328620464 21.845743254265603 2008-Apr-28 18:41:37 LOG4 log_alfabeam: ALFABEAM 2 9.715420511044341 21.791917968182926 2008-Apr-28 18:41:37 LOG4 log_alfabeam: ALFABEAM 3 9.722561074912871 21.829068189669304 2008-Apr-28 18:41:37 LOG4 log_alfabeam: ALFABEAM 4 9.723795830678695 21.921092723279759 2008-Apr-28 18:41:37 LOG4 log_alfabeam: ALFABEAM 5 9.717873047621463 21.975045691904633 2008-Apr-28 18:41:37 LOG4 log_alfabeam: ALFABEAM 6 9.710754333253597 21.936847084591669 2008-Apr-28 18:41:37 INFO2 take_spectra: Starting WAPP+GALFA scan: 811900088 2008-Apr-28 18:41:38 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-28 18:41:38 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-28 18:41:38 LOG5 begin_task: Level: (4) ID = <10088> Status = 0 0 0 0 ok 2008-Apr-28 18:41:38 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-28 18:41:38 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Apr-28 18:41:38 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 18:41:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:41:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:41:38 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81699.00 2008-Apr-28 18:41:39 INFO5 check_wapp_levels: WAPP power levels are between 1.197 and 1.466 (still bad) 2008-Apr-28 18:41:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-28 18:41:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:41:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:41:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:41:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:41:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-28 18:41:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-28 18:41:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-28 18:41:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-28 18:41:41 INFO5 check_wapp_levels: WAPP power levels are between 1.196 and 1.467 (still bad) 2008-Apr-28 18:41:43 INFO5 check_wapp_levels: WAPP power levels are between 1.195 and 1.467 (still bad) 2008-Apr-28 18:41:45 INFO5 check_wapp_levels: WAPP power levels are between 1.197 and 1.467 (still bad) 2008-Apr-28 18:41:47 INFO5 check_wapp_levels: WAPP power levels are between 1.197 and 1.467 (still bad) 2008-Apr-28 18:41:49 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-28 18:41:49 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-28 18:41:49 LOG5 end_task: Level: (4) ID = <10088> Status = 0 0 0 0 ok 2008-Apr-28 18:41:49 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-28 18:41:49 LOG5 end_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2008-Apr-28 18:41:49 INFO2 smartfreq: Switching off CAL 2008-Apr-28 18:41:49 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-28 18:41:49 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-28 18:41:49 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-28 18:41:49 LOG5 begin_task: Level: (3) ID = <10089> Status = 0 0 0 0 ok 2008-Apr-28 18:41:49 INFO5 check_wapp_levels: WAPP power levels are between 1.199 and 1.466 (still bad) 2008-Apr-28 18:41:49 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-28 18:41:49 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-28 18:41:49 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-28 18:41:49 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-28 18:41:49 LOG5 end_task: Level: (3) ID = <10089> Status = 0 0 0 0 ok 2008-Apr-28 18:41:49 INFO3 restore_frequencies: Restoring original frequencies 2008-Apr-28 18:41:49 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-28 18:41:49 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32794 J 2008-Apr-28 18:41:49 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.5 2008-Apr-28 18:41:49 LOG2 antvel: Parameters to Doppler: Topocentric 81709 2008 119 0.0 2008-Apr-28 18:41:49 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-28 18:41:49 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.2 rest0=1381.2 rest1=1381.2 rest2=1381.2 rest3=1381.2 rest4=1381.2 rest5=1381.2 rest6=1381.2 rest7=1381.2 2008-Apr-28 18:41:49 INFO4 dopset_gen: New sky frequencies: 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 2008-Apr-28 18:41:49 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.200000 sky0=1381.200000 sky1=1381.200000 sky2=1381.200000 sky3=1381.200000 sky4=1381.200000 sky5=1381.200000 sky6=1381.200000 sky7=1381.200000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-28 18:41:49 LOG2 dopset_gen: Result from 'sky2syn': 1631.200000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-28 18:41:49 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2008-Apr-28 18:41:49 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 18:41:49 STOP finish_task: Finishing task 'smart frequency switching' 2008-Apr-28 18:41:49 LOG5 finish_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2008-Apr-28 18:41:49 DONE finish_task: DONE finished pattern: smart frequency switching 2008-Apr-28 18:41:49 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-28 18:41:49 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2008-Apr-28 18:41:49 LOG5 end_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2008-Apr-28 18:41:49 NOTE run_command_file: DONE with command file processing 2008-Apr-28 18:41:49 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2008-Apr-28 18:41:49 STOP finish_task: Finishing task 'running command file 'command_galfasrc.cmd'' 2008-Apr-28 18:41:49 LOG5 finish_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Apr-28 18:41:49 DONE finish_task: DONE finished running: command file 'command_galfasrc.cmd' 2008-Apr-28 18:41:50 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-28 18:41:50 END end_task: Finishing task 'running command file 'command_galfasrc.cmd'' with status 'OK' 2008-Apr-28 18:41:50 LOG5 end_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Apr-28 18:41:50 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2008-Apr-28 18:41:50 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 18:41:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:41:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:42:26 INFO1 CIMA-run_command_file: Transferring command file '080428_obs.cmd ' to executive ... 2008-Apr-28 18:42:26 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 3 {LOAD ages_config.conf} 2008-Apr-28 18:42:26 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 4 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5} 2008-Apr-28 18:42:26 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {FIXEDDRIFT az=248.51 alfaangle=-52.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_031 ra=95300.00 dec=230800.00} 2008-Apr-28 18:42:26 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 11 {FIXEDDRIFT az=239.34 alfaangle=-39.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_033 ra=95300.00 dec=230500.00} 2008-Apr-28 18:42:26 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 15 {FIXEDDRIFT az=212.67 alfaangle=-10.7 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_035 ra=95300.00 dec=230200.00} 2008-Apr-28 18:42:26 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 19 {FIXEDDRIFT az=147.04 alfaangle=49.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_037 ra=95300.00 dec=225900.00} 2008-Apr-28 18:42:26 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 23 {FIXEDDRIFT az=119.86 alfaangle=78.7 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_039 ra=95300.00 dec=225600.00} 2008-Apr-28 18:42:26 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 27 {FIXEDDRIFT az=110.53 alfaangle=-88.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_041 ra=95300.00 dec=225300.00} 2008-Apr-28 18:42:26 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 31 {FIXEDDRIFT az=311.91 alfaangle=60.2 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_048 ra=120900.00 dec=74930.00} 2008-Apr-28 18:42:26 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 35 {FIXEDDRIFT az=331.50 alfaangle=42.9 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_050 ra=120900.00 dec=74630.00} 2008-Apr-28 18:42:26 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 39 {FIXEDDRIFT az=0.00 alfaangle=19.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_052 ra=120900.00 dec=74330.00} 2008-Apr-28 18:42:26 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 43 {FIXEDDRIFT az=28.28 alfaangle=-4.5 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_054 ra=120900.00 dec=74030.00} 2008-Apr-28 18:42:26 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 47 {FIXEDDRIFT az=47.56 alfaangle=-21.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_056 ra=120900.00 dec=73730.00} 2008-Apr-28 18:42:26 LOG4 exec_msg: From OBSERVER: store_command_file_line 14 51 {FIXEDDRIFT az=47.62 alfaangle=-21.5 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p1_065 ra=122900.00 dec=72400.00} 2008-Apr-28 18:42:26 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-Apr-28 18:42:26 LOG4 exec_msg: From OBSERVER: run_command_file 080428_obs.cmd 1 1 14 2008-Apr-28 18:42:26 LOG4 run_command_file: Calling 'run_command_file 080428_obs.cmd 1 1 14' 2008-Apr-28 18:42:26 BEGIN begin_task: Starting task 'running command file '080428_obs.cmd'' 2008-Apr-28 18:42:26 LOG5 begin_task: Level: (1) ID = <10090> Status = 0 0 0 0 ok 2008-Apr-28 18:42:26 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '080428_obs.cmd' ...} 2008-Apr-28 18:42:26 NOTE run_command_file: Starting execution of command file '080428_obs.cmd' from line 1 2008-Apr-28 18:42:26 COMMAND run_command_line: EXECUTING command 3: 'LOAD ages_config.conf' 2008-Apr-28 18:42:26 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2008-Apr-28 18:42:26 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-28 18:42:26 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2008-Apr-28 18:42:27 NOTE CIMA-load_config_file: Loading configuration file 'ages_config.conf' 2008-Apr-28 18:42:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Apr-28 18:42:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Apr-28 18:42:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Apr-28 18:42:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Apr-28 18:42:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Apr-28 18:42:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2008-Apr-28 18:42:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Apr-28 18:42:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786" 2008-Apr-28 18:42:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786" 2008-Apr-28 18:42:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786" 2008-Apr-28 18:42:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786" 2008-Apr-28 18:42:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786" 2008-Apr-28 18:42:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786" 2008-Apr-28 18:42:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786" 2008-Apr-28 18:42:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786" 2008-Apr-28 18:42:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786" 2008-Apr-28 18:42:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Apr-28 18:42:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Apr-28 18:42:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Apr-28 18:42:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Apr-28 18:42:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Apr-28 18:42:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Apr-28 18:42:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Apr-28 18:42:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Apr-28 18:42:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Apr-28 18:42:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Apr-28 18:42:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Apr-28 18:42:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Apr-28 18:42:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Apr-28 18:42:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2008-Apr-28 18:42:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Apr-28 18:42:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Apr-28 18:42:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Apr-28 18:42:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Apr-28 18:42:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Apr-28 18:42:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Apr-28 18:42:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Apr-28 18:42:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Apr-28 18:42:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Apr-28 18:42:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1670.405752" 2008-Apr-28 18:42:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Apr-28 18:42:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Apr-28 18:42:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Apr-28 18:42:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Apr-28 18:42:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Apr-28 18:42:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Apr-28 18:42:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Apr-28 18:42:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Apr-28 18:42:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Apr-28 18:42:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Apr-28 18:42:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Apr-28 18:42:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Apr-28 18:42:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Apr-28 18:42:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Apr-28 18:42:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Apr-28 18:42:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Apr-28 18:42:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Apr-28 18:42:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Apr-28 18:42:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Apr-28 18:42:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Apr-28 18:42:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Apr-28 18:42:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Apr-28 18:42:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Apr-28 18:42:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Apr-28 18:42:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Apr-28 18:42:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Apr-28 18:42:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Apr-28 18:42:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Apr-28 18:42:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Apr-28 18:42:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Apr-28 18:42:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Apr-28 18:42:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Apr-28 18:42:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Apr-28 18:42:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Apr-28 18:42:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Apr-28 18:42:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Apr-28 18:42:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Apr-28 18:42:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Apr-28 18:42:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Apr-28 18:42:28 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-28 18:42:28 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Apr-28 18:42:28 LOG5 begin_task: Level: (2) ID = <10091> Status = 0 0 0 0 ok 2008-Apr-28 18:42:28 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Apr-28 18:42:28 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Apr-28 18:42:29 LOG1 config_iflo: Receiver ALFA already selected 2008-Apr-28 18:42:29 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-28 18:42:29 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-28 18:42:29 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-28 18:42:29 LOG5 begin_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2008-Apr-28 18:42:29 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-28 18:42:29 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-28 18:42:29 LOG5 end_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2008-Apr-28 18:42:29 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-28 18:42:29 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-28 18:42:29 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2008-Apr-28 18:42:29 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2008-Apr-28 18:42:29 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Apr-28 18:42:29 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Apr-28 18:42:29 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2008-Apr-28 18:42:29 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2008-Apr-28 18:42:29 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2008-Apr-28 18:42:29 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1670405752.0} 2008-Apr-28 18:42:29 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2008-Apr-28 18:42:29 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2008-Apr-28 18:42:29 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Apr-28 18:42:29 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Apr-28 18:42:29 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Apr-28 18:42:29 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Apr-28 18:42:29 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Apr-28 18:42:29 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2008-Apr-28 18:42:29 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2008-Apr-28 18:42:29 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2008-Apr-28 18:42:29 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2008-Apr-28 18:42:29 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Apr-28 18:42:29 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2008-Apr-28 18:42:29 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2008-Apr-28 18:42:29 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Apr-28 18:42:29 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 18:42:29 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2008-Apr-28 18:42:29 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2008-Apr-28 18:42:29 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Apr-28 18:42:29 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2008-Apr-28 18:42:29 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2008-Apr-28 18:42:29 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Apr-28 18:42:29 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 18:42:29 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Apr-28 18:42:29 LOG5 begin_task: Level: (3) ID = <10093> Status = 0 0 0 0 ok 2008-Apr-28 18:42:29 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1670405752.0} 2008-Apr-28 18:42:29 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Apr-28 18:42:29 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 18:42:29 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 18:42:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:42:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:42:29 LOG4 got_cormsg: From DATATAKING: vw% DONE 2008-Apr-28 18:42:29 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Apr-28 18:42:29 LOG5 end_task: Level: (3) ID = <10093> Status = 0 0 0 0 ok 2008-Apr-28 18:42:29 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Apr-28 18:42:29 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Apr-28 18:42:29 LOG5 finish_task: Level: (2) ID = <10091> Status = 0 0 0 0 ok 2008-Apr-28 18:42:29 DONE finish_task: DONE finished configuration: IF/LO path 2008-Apr-28 18:42:29 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-28 18:42:29 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Apr-28 18:42:29 LOG5 end_task: Level: (2) ID = <10091> Status = 0 0 0 0 ok 2008-Apr-28 18:42:29 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Apr-28 18:42:29 LOG5 begin_task: Level: (2) ID = <10094> Status = 0 0 0 0 ok 2008-Apr-28 18:42:29 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Apr-28 18:42:29 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Apr-28 18:42:29 START begin_task: Starting task 'selecting calibration port' 2008-Apr-28 18:42:29 LOG5 begin_task: Level: (3) ID = <10095> Status = 0 0 0 0 ok 2008-Apr-28 18:42:29 LOG3 vw_send: To DATATAKING: calport 3 2008-Apr-28 18:42:29 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Apr-28 18:42:29 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 18:42:29 START begin_task: Starting task 'waiting on calport' 2008-Apr-28 18:42:29 LOG5 begin_task: Level: (4) ID = <10096> Status = 0 0 0 0 ok 2008-Apr-28 18:42:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:42:29 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Apr-28 18:42:29 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 18:42:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:42:30 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-28 18:42:30 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Apr-28 18:42:30 LOG5 end_task: Level: (4) ID = <10096> Status = 0 0 0 0 ok 2008-Apr-28 18:42:30 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Apr-28 18:42:30 STOP finish_task: Finishing task 'selecting calibration port' 2008-Apr-28 18:42:30 LOG5 finish_task: Level: (3) ID = <10095> Status = 0 0 0 0 ok 2008-Apr-28 18:42:30 INFO2 finish_task: DONE finished configuring: calibration port 2008-Apr-28 18:42:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 18:42:30 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Apr-28 18:42:30 LOG5 end_task: Level: (3) ID = <10095> Status = 0 0 0 0 ok 2008-Apr-28 18:42:30 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Apr-28 18:42:30 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Apr-28 18:42:30 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Apr-28 18:42:30 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Apr-28 18:42:30 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Apr-28 18:42:30 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Apr-28 18:42:30 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Apr-28 18:42:30 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Apr-28 18:42:30 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Steve Schnei 2008-Apr-28 18:42:30 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Steve Schnei 2008-Apr-28 18:42:30 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Steve Schnei 2008-Apr-28 18:42:30 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Steve Schnei 2008-Apr-28 18:42:30 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Apr-28 18:42:30 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Apr-28 18:42:30 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-28 18:42:30 LOG5 begin_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2008-Apr-28 18:42:30 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Apr-28 18:42:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:42:30 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-28 18:42:30 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Apr-28 18:42:30 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-28 18:42:30 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Steve Schnei' 2008-Apr-28 18:42:30 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-28 18:42:30 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-28 18:42:30 LOG5 end_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2008-Apr-28 18:42:30 LOG3 sock_errsend: To WAPPDATA: FLUSH 2008-Apr-28 18:42:30 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Apr-28 18:42:30 LOG5 finish_task: Level: (2) ID = <10094> Status = 0 0 0 0 ok 2008-Apr-28 18:42:30 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Apr-28 18:42:30 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-28 18:42:30 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Apr-28 18:42:30 LOG5 end_task: Level: (2) ID = <10094> Status = 0 0 0 0 ok 2008-Apr-28 18:42:30 COMMAND run_command_line: EXECUTING command 4: 'SETUP FIXEDDRIFT calwhen=tracking calsecs=5' 2008-Apr-28 18:42:30 COMMAND run_command_line: EXECUTING command 7: 'FIXEDDRIFT az=248.51 alfaangle=-52.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_031 ra=95300.00 dec=230800.00' 2008-Apr-28 18:42:30 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-28 18:42:30 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Apr-28 18:42:31 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-28 18:42:31 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 248.51 -52.1 hcorcal 5 tracking no first 1 AGES3193_p2_031 95300.00 230800.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-28 18:42:31 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-28 18:42:31 LOG5 begin_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2008-Apr-28 18:42:31 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'galfasrc' 2008-Apr-28 18:42:31 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-28 18:42:31 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p2_031} 2008-Apr-28 18:42:31 INFO3 fixed_driftmap: Sending telescope to Az = 248.51 and ZA = 14.58 2008-Apr-28 18:42:31 LOG3 track_source: Calling 'track_source AGES3193_p2_031 248.51 14.5751947410 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-28 18:42:31 START begin_task: Starting task 'sending tracking commands' 2008-Apr-28 18:42:31 LOG5 begin_task: Level: (3) ID = <10099> Status = 0 0 0 0 ok 2008-Apr-28 18:42:31 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_031} INFO {Slewing to source 'AGES3193_p2_031' ...} 2008-Apr-28 18:42:31 INFO1 track_source: Starting to track AGES3193_p2_031 2008-Apr-28 18:42:31 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_031" 2008-Apr-28 18:42:32 LOG3 vw_send: To DATATAKING: set ra 248.51 2008-Apr-28 18:42:32 LOG3 vw_send: To DATATAKING: set dec 14.5751947410 2008-Apr-28 18:42:32 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-28 18:42:32 LOG3 vw_send: To DATATAKING: pnt tr 248.51 14.5751947410 -CF 2008-Apr-28 18:42:32 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-28 18:42:32 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-28 18:42:32 LOG5 finish_task: Level: (3) ID = <10099> Status = 0 0 0 0 ok 2008-Apr-28 18:42:32 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-28 18:42:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 18:42:32 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-28 18:42:32 LOG5 end_task: Level: (3) ID = <10099> Status = 0 0 0 0 ok 2008-Apr-28 18:42:32 START begin_task: Starting task 'rotate ALFA to -52.1 degrees' 2008-Apr-28 18:42:32 LOG5 begin_task: Level: (3) ID = <10100> Status = 0 0 0 0 ok 2008-Apr-28 18:42:32 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -52.1 degrees ...} 2008-Apr-28 18:42:32 INFO2 rotate_alfa: ALFA commanded to -52.1 degrees 2008-Apr-28 18:42:32 LOG3 sock_errsend: To ALFAMOTOR: POSITION -52.1 REPLY 2008-Apr-28 18:42:32 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-28 18:42:32 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-28 18:42:32 LOG5 begin_task: Level: (4) ID = <10101> Status = 0 0 0 0 ok 2008-Apr-28 18:42:32 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_031" 2008-Apr-28 18:42:32 LOG4 got_cormsg: From DATATAKING: set ra 248.51 2008-Apr-28 18:42:32 LOG4 got_cormsg: From DATATAKING: set dec 14.5751947410 2008-Apr-28 18:42:32 LOG4 got_cormsg: From DATATAKING: vw% 248.51 2008-Apr-28 18:42:32 LOG4 got_cormsg: From DATATAKING: vw% 14.5751947410 2008-Apr-28 18:42:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:42:32 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-28 18:42:32 LOG4 got_cormsg: From DATATAKING: pnt tr 248.51 14.5751947410 -CF 2008-Apr-28 18:42:32 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-28 18:42:32 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2008-Apr-28 18:43:12 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-28 18:43:12 INFO3 alfa_motor: ALFA rotator in-position -52.10 degrees 2008-Apr-28 18:43:12 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-28 18:43:12 LOG5 end_task: Level: (4) ID = <10101> Status = 0 0 0 0 ok 2008-Apr-28 18:43:12 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-28 18:43:12 STOP finish_task: Finishing task 'rotate ALFA to -52.1 degrees' 2008-Apr-28 18:43:12 LOG5 finish_task: Level: (3) ID = <10100> Status = 0 0 0 0 ok 2008-Apr-28 18:43:12 INFO2 finish_task: DONE finished configuration: rotating ALFA to -52.1 degrees 2008-Apr-28 18:43:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 18:43:12 STOP end_task: Finishing task 'rotate ALFA to -52.1 degrees' with status 'OK' 2008-Apr-28 18:43:12 LOG5 end_task: Level: (3) ID = <10100> Status = 0 0 0 0 ok 2008-Apr-28 18:43:12 START begin_task: Starting task 'waiting on telescope' 2008-Apr-28 18:43:12 LOG5 begin_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2008-Apr-28 18:43:12 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-28 18:43:12 LOG3 waittrk: Start waittrk 5 2008-Apr-28 18:43:12 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-28 18:43:12 LOG5 begin_task: Level: (4) ID = <10103> Status = 0 0 0 0 ok 2008-Apr-28 18:43:17 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-28 18:43:17 LOG5 end_task: Level: (4) ID = <10103> Status = 0 0 0 0 ok 2008-Apr-28 18:43:17 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-28 18:43:17 LOG5 begin_task: Level: (4) ID = <10104> Status = 0 0 0 0 ok 2008-Apr-28 18:43:17 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-28 18:43:17 LOG5 end_task: Level: (4) ID = <10104> Status = 0 0 0 0 ok 2008-Apr-28 18:43:17 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-28 18:43:17 INFO2 waittrk: Now tracking AGES3193_p2_031 2008-Apr-28 18:43:17 LOG4 waittrk: Current telescope position: Az = 248.06 ZA = 14.59 2008-Apr-28 18:43:17 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-28 18:43:17 LOG5 finish_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2008-Apr-28 18:43:17 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-28 18:43:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 18:43:17 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-28 18:43:17 LOG5 end_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2008-Apr-28 18:43:17 START begin_task: Starting task 'selecting calibration type' 2008-Apr-28 18:43:17 LOG5 begin_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2008-Apr-28 18:43:17 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-28 18:43:17 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-28 18:43:17 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 18:43:17 START begin_task: Starting task 'waiting on setcal' 2008-Apr-28 18:43:17 LOG5 begin_task: Level: (4) ID = <10106> Status = 0 0 0 0 ok 2008-Apr-28 18:43:17 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-28 18:43:17 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 18:43:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:43:17 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-28 18:43:18 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-28 18:43:18 LOG5 end_task: Level: (4) ID = <10106> Status = 0 0 0 0 ok 2008-Apr-28 18:43:18 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-28 18:43:18 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-28 18:43:18 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-28 18:43:18 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-28 18:43:18 LOG5 begin_task: Level: (4) ID = <10107> Status = 0 0 0 0 ok 2008-Apr-28 18:43:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:43:18 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-28 18:43:18 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-28 18:43:18 LOG5 end_task: Level: (4) ID = <10107> Status = 0 0 0 0 ok 2008-Apr-28 18:43:18 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-28 18:43:18 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-28 18:43:18 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-28 18:43:18 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-28 18:43:18 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-28 18:43:18 LOG5 begin_task: Level: (4) ID = <10108> Status = 0 0 0 0 ok 2008-Apr-28 18:43:18 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-28 18:43:18 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-28 18:43:18 LOG5 end_task: Level: (4) ID = <10108> Status = 0 0 0 0 ok 2008-Apr-28 18:43:18 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-28 18:43:18 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-28 18:43:18 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-28 18:43:18 LOG5 finish_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2008-Apr-28 18:43:18 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-28 18:43:18 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 18:43:18 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-28 18:43:18 LOG5 end_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2008-Apr-28 18:43:18 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2008-Apr-28 18:43:18 INFO2 astwait: Waiting for 487 seconds from 22:43:18 to 22:51:25 UTC ... 2008-Apr-28 18:43:18 LOG4 send_obs_status: To obs_status: <1> TASKTIME 487 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-28 18:43:18 START begin_task: Starting task 'waiting on waiting for AST time' 2008-Apr-28 18:43:18 LOG5 begin_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2008-Apr-28 18:51:25 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2008-Apr-28 18:51:25 LOG5 end_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2008-Apr-28 18:51:25 INFO3 astwait: Finished waiting 2008-Apr-28 18:51:25 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-28 18:51:25 LOG5 dopset_later: Calling 'dopset_later 60.977045800530192' 2008-Apr-28 18:51:25 INFO3 dopset_later: Setting Doppler correction for 18:52:25 (61 seconds from now) 2008-Apr-28 18:51:25 LOG5 antvel: Calling 'antvel 248.510000 14.575195 F 60.977045800530192' 2008-Apr-28 18:51:25 LOG2 antvel: Parameters to Doppler: Heliocentric 82345 2008 119 0.0 2008-Apr-28 18:51:25 INFO5 antvel: Computed antenna velocity: +28.12448 km/s 2008-Apr-28 18:51:25 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=28.124478104800001 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-28 18:51:25 INFO4 dopset_gen: New sky frequencies: 1381.113862 1381.113862 1381.113862 1381.113862 1381.113862 1381.113862 1381.113862 1381.113862 1381.113862 2008-Apr-28 18:51:25 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.113862 sky0=1381.113862 sky1=1381.113862 sky2=1381.113862 sky3=1381.113862 sky4=1381.113862 sky5=1381.113862 sky6=1381.113862 sky7=1381.113862 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-28 18:51:25 LOG2 dopset_gen: Result from 'sky2syn': 1631.113862 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-28 18:51:25 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631113862.0} 2008-Apr-28 18:51:25 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 18:51:25 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-28 18:51:25 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-28 18:51:25 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:03.0 Dec = +23:08:02.1 2008-Apr-28 18:51:25 LOG3 track_source: Calling 'track_source AGES3193_p2_031 095203.0 230802.1 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-28 18:51:25 START begin_task: Starting task 'sending tracking commands' 2008-Apr-28 18:51:25 LOG5 begin_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2008-Apr-28 18:51:25 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_031} INFO {Slewing to source 'AGES3193_p2_031' ...} 2008-Apr-28 18:51:25 INFO1 track_source: Starting to track AGES3193_p2_031 2008-Apr-28 18:51:25 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_031" 2008-Apr-28 18:51:25 LOG3 vw_send: To DATATAKING: set ra 095203.0 2008-Apr-28 18:51:25 LOG3 vw_send: To DATATAKING: set dec 230802.1 2008-Apr-28 18:51:25 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-28 18:51:25 LOG3 vw_send: To DATATAKING: pnt tr 095203.0 230802.1 -CJ 2008-Apr-28 18:51:25 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-28 18:51:25 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-28 18:51:25 LOG5 finish_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2008-Apr-28 18:51:25 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-28 18:51:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 18:51:25 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-28 18:51:25 LOG5 end_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2008-Apr-28 18:51:25 START begin_task: Starting task 'waiting on telescope' 2008-Apr-28 18:51:25 LOG5 begin_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2008-Apr-28 18:51:25 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-28 18:51:25 LOG3 waittrk: Start waittrk 5 2008-Apr-28 18:51:25 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-28 18:51:25 LOG5 begin_task: Level: (4) ID = <10112> Status = 0 0 0 0 ok 2008-Apr-28 18:51:25 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631113862.0} 2008-Apr-28 18:51:25 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 18:51:25 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_031" 2008-Apr-28 18:51:25 LOG4 got_cormsg: From DATATAKING: set ra 095203.0 2008-Apr-28 18:51:25 LOG4 got_cormsg: From DATATAKING: set dec 230802.1 2008-Apr-28 18:51:25 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-28 18:51:25 LOG4 got_cormsg: From DATATAKING: vw% 095203.0 2008-Apr-28 18:51:25 LOG4 got_cormsg: From DATATAKING: vw% 230802.1 2008-Apr-28 18:51:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:51:25 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-28 18:51:25 LOG4 got_cormsg: From DATATAKING: pnt tr 095203.0 230802.1 -CJ 2008-Apr-28 18:51:25 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-28 18:51:25 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-28 18:51:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:51:30 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-28 18:51:30 LOG5 end_task: Level: (4) ID = <10112> Status = 0 0 0 0 ok 2008-Apr-28 18:51:30 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-28 18:51:30 LOG5 begin_task: Level: (4) ID = <10113> Status = 0 0 0 0 ok 2008-Apr-28 18:51:32 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-28 18:51:32 LOG5 end_task: Level: (4) ID = <10113> Status = 0 0 0 0 ok 2008-Apr-28 18:51:32 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-28 18:51:32 INFO2 waittrk: Now tracking AGES3193_p2_031 2008-Apr-28 18:51:32 LOG4 waittrk: Current telescope position: Az = 248.04 ZA = 14.57 2008-Apr-28 18:51:32 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-28 18:51:32 LOG5 finish_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2008-Apr-28 18:51:32 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-28 18:51:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 18:51:32 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-28 18:51:32 LOG5 end_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2008-Apr-28 18:51:32 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-28 18:51:32 LOG5 begin_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2008-Apr-28 18:51:32 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-28 18:51:32 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-28 18:51:32 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-28 18:51:32 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-28 18:51:32 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 18:51:32 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-28 18:51:32 LOG5 begin_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2008-Apr-28 18:51:33 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-28 18:51:33 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 18:51:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:51:36 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-28 18:51:36 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-28 18:51:36 LOG5 end_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2008-Apr-28 18:51:36 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-28 18:51:36 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-28 18:51:36 LOG5 begin_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2008-Apr-28 18:51:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-28 18:51:36 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-28 18:51:36 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-28 18:51:36 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-28 18:51:36 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-28 18:51:36 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-28 18:51:36 LOG5 begin_task: Level: (5) ID = <10117> Status = 0 0 0 0 ok 2008-Apr-28 18:51:36 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-28 18:51:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:51:36 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 1 dB --- beam 1: 7 6 dB 2008-Apr-28 18:51:36 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-28 18:51:36 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 6 dB 2008-Apr-28 18:51:36 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 3 3 dB 2008-Apr-28 18:51:36 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-28 18:51:36 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-28 18:51:36 LOG5 end_task: Level: (5) ID = <10117> Status = 0 0 0 0 ok 2008-Apr-28 18:51:36 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.925 0.969 ALFA beam 1: 1.133 1.037 2008-Apr-28 18:51:36 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.053 0.950 ALFA beam 3: 1.019 1.075 2008-Apr-28 18:51:36 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.940 0.980 ALFA beam 5: 1.089 0.950 2008-Apr-28 18:51:36 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.078 1.040 ALFA beam 7: 0.941 0.925 2008-Apr-28 18:51:36 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-28 18:51:36 LOG5 finish_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2008-Apr-28 18:51:36 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-28 18:51:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 18:51:36 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-28 18:51:36 LOG5 end_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2008-Apr-28 18:51:36 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-28 18:51:36 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-28 18:51:36 LOG5 finish_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2008-Apr-28 18:51:36 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-28 18:51:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 18:51:36 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-28 18:51:36 LOG5 end_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2008-Apr-28 18:51:36 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Steve Schnei 2008-Apr-28 18:51:36 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Steve Schnei 2008-Apr-28 18:51:36 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Steve Schnei 2008-Apr-28 18:51:36 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Steve Schnei 2008-Apr-28 18:51:37 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-28 18:51:37 START begin_task: Starting task 'WAPP calibration' 2008-Apr-28 18:51:37 LOG5 begin_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2008-Apr-28 18:51:37 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-28 18:51:37 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-28 18:51:37 START begin_task: Starting task 'selecting calibration type' 2008-Apr-28 18:51:37 LOG5 begin_task: Level: (4) ID = <10119> Status = 0 0 0 0 ok 2008-Apr-28 18:51:37 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-28 18:51:37 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-28 18:51:37 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 18:51:37 START begin_task: Starting task 'waiting on setcal' 2008-Apr-28 18:51:37 LOG5 begin_task: Level: (5) ID = <10120> Status = 0 0 0 0 ok 2008-Apr-28 18:51:37 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Steve Schnei' 2008-Apr-28 18:51:37 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-28 18:51:37 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 18:51:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:51:37 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-28 18:51:37 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-28 18:51:37 LOG5 end_task: Level: (5) ID = <10120> Status = 0 0 0 0 ok 2008-Apr-28 18:51:37 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-28 18:51:37 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-28 18:51:37 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-28 18:51:37 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-28 18:51:37 LOG5 begin_task: Level: (5) ID = <10121> Status = 0 0 0 0 ok 2008-Apr-28 18:51:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:51:37 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-28 18:51:37 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-28 18:51:37 LOG5 end_task: Level: (5) ID = <10121> Status = 0 0 0 0 ok 2008-Apr-28 18:51:37 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-28 18:51:37 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-28 18:51:37 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-28 18:51:37 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-28 18:51:37 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-28 18:51:37 LOG5 begin_task: Level: (5) ID = <10122> Status = 0 0 0 0 ok 2008-Apr-28 18:51:37 NOTE WAPPDATA-new_file: New FITS file: wapp.20080428.a2048.0001.fits 2008-Apr-28 18:51:37 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-28 18:51:37 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-28 18:51:37 LOG5 end_task: Level: (5) ID = <10122> Status = 0 0 0 0 ok 2008-Apr-28 18:51:37 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-28 18:51:37 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-28 18:51:37 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-28 18:51:37 LOG5 finish_task: Level: (4) ID = <10119> Status = 0 0 0 0 ok 2008-Apr-28 18:51:37 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-28 18:51:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 18:51:37 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-28 18:51:37 LOG5 end_task: Level: (4) ID = <10119> Status = 0 0 0 0 ok 2008-Apr-28 18:51:37 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-28 18:51:37 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-28 18:51:37 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-28 18:51:37 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-28 18:51:37 LOG5 begin_task: Level: (4) ID = <10123> Status = 0 0 0 0 ok 2008-Apr-28 18:51:37 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080428.a2048.0001.fits} 2008-Apr-28 18:51:37 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-28 18:51:37 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-28 18:51:37 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-28 18:51:37 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-28 18:51:37 LOG5 end_task: Level: (4) ID = <10123> Status = 0 0 0 0 ok 2008-Apr-28 18:51:37 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-28 18:51:37 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-28 18:51:37 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-28 18:51:37 LOG5 begin_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2008-Apr-28 18:51:37 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-28 18:51:37 LOG5 log_alfabeam: Parameters: 9.8674999999999997 23.133916666666668 8.894950 2008.327955769767 -52.100094 2008-Apr-28 18:51:37 LOG4 log_alfabeam: ALFABEAM 0 9.867499999999998 23.133916666666675 2008-Apr-28 18:51:37 LOG4 log_alfabeam: ALFABEAM 1 9.868303538942191 23.042916478535354 2008-Apr-28 18:51:37 LOG4 log_alfabeam: ALFABEAM 2 9.874497685215147 23.103322681056817 2008-Apr-28 18:51:37 LOG4 log_alfabeam: ALFABEAM 3 9.873670496803101 23.194882187538433 2008-Apr-28 18:51:37 LOG4 log_alfabeam: ALFABEAM 4 9.866653318115127 23.224932269522448 2008-Apr-28 18:51:37 LOG4 log_alfabeam: ALFABEAM 5 9.860497361437780 23.163770991115204 2008-Apr-28 18:51:37 LOG4 log_alfabeam: ALFABEAM 6 9.861320240562705 23.073313701669889 2008-Apr-28 18:51:37 INFO2 take_spectra: Starting WAPP scan: 811900089 2008-Apr-28 18:51:38 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-28 18:51:38 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-28 18:51:38 LOG5 begin_task: Level: (5) ID = <10125> Status = 0 0 0 0 ok 2008-Apr-28 18:51:38 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-28 18:51:38 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82299.00 2008-Apr-28 18:51:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.113862 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-28 18:51:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.113862 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:51:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.113862 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:51:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.113862 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:51:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.113862 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:51:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.113862 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-28 18:51:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.113862 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-28 18:51:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.113862 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-28 18:51:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.113862 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-28 18:51:44 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-28 18:51:44 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-28 18:51:44 LOG5 end_task: Level: (5) ID = <10125> Status = 0 0 0 0 ok 2008-Apr-28 18:51:44 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-28 18:51:44 LOG5 end_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2008-Apr-28 18:51:44 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-28 18:51:44 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-28 18:51:44 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-28 18:51:44 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-28 18:51:44 LOG5 begin_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2008-Apr-28 18:51:44 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-28 18:51:44 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-28 18:51:44 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-28 18:51:44 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-28 18:51:44 LOG5 end_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2008-Apr-28 18:51:44 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-28 18:51:44 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-28 18:51:44 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-28 18:51:44 LOG5 begin_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2008-Apr-28 18:51:44 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-28 18:51:44 LOG5 log_alfabeam: Parameters: 9.8674999999999997 23.133916666666668 8.896900 2008.3279559915836 -52.100094 2008-Apr-28 18:51:44 LOG4 log_alfabeam: ALFABEAM 0 9.867499999999996 23.133916666666661 2008-Apr-28 18:51:44 LOG4 log_alfabeam: ALFABEAM 1 9.868308177662531 23.042924383223458 2008-Apr-28 18:51:44 LOG4 log_alfabeam: ALFABEAM 2 9.874499256800080 23.103390555831314 2008-Apr-28 18:51:44 LOG4 log_alfabeam: ALFABEAM 3 9.873667345265167 23.194942952521409 2008-Apr-28 18:51:44 LOG4 log_alfabeam: ALFABEAM 4 9.866648594231537 23.224923972205197 2008-Apr-28 18:51:44 LOG4 log_alfabeam: ALFABEAM 5 9.860495827503380 23.163701822953762 2008-Apr-28 18:51:44 LOG4 log_alfabeam: ALFABEAM 6 9.861323345747653 23.073253619795416 2008-Apr-28 18:51:44 INFO2 take_spectra: Starting WAPP scan: 811900090 2008-Apr-28 18:51:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-28 18:51:45 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-28 18:51:45 LOG5 begin_task: Level: (5) ID = <10128> Status = 0 0 0 0 ok 2008-Apr-28 18:51:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-28 18:51:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82306.00 2008-Apr-28 18:51:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.530 > 1.4)! 2008-Apr-28 18:51:50 LOG4 check_wapp_levels: WAPP-1 power levels: 1.264 1.241 1.530 1.416 2008-Apr-28 18:51:50 LOG4 check_wapp_levels: WAPP-2 power levels: 1.421 1.314 1.397 1.461 2008-Apr-28 18:51:50 LOG4 check_wapp_levels: WAPP-3 power levels: 1.305 1.358 1.486 1.261 2008-Apr-28 18:51:50 LOG4 check_wapp_levels: WAPP-4 power levels: 1.485 1.438 1.294 1.277 2008-Apr-28 18:51:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.113862 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-28 18:51:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.113862 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:51:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.113862 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:51:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.113862 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:51:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.113862 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:51:51 LOG3 WAPP=2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.113862 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-28 18:51:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.113862 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-28 18:51:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.113862 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-28 18:51:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.113862 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-28 18:51:51 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-28 18:51:51 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-28 18:51:51 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-28 18:51:51 LOG5 end_task: Level: (5) ID = <10128> Status = 0 0 0 0 ok 2008-Apr-28 18:51:51 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-28 18:51:51 LOG5 end_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2008-Apr-28 18:51:51 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-28 18:51:51 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-28 18:51:51 LOG5 finish_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2008-Apr-28 18:51:51 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-28 18:51:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 18:51:51 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-28 18:51:51 LOG5 end_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2008-Apr-28 18:51:51 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-28 18:51:51 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 248.51 and ZA = 14.58 2008-Apr-28 18:51:51 LOG3 track_source: Calling 'track_source AGES3193_p2_031 248.51 14.5751947410 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-28 18:51:51 START begin_task: Starting task 'sending tracking commands' 2008-Apr-28 18:51:51 LOG5 begin_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2008-Apr-28 18:51:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_031} INFO {Slewing to source 'AGES3193_p2_031' ...} 2008-Apr-28 18:51:51 INFO1 track_source: Starting to track AGES3193_p2_031 2008-Apr-28 18:51:51 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_031" 2008-Apr-28 18:51:51 LOG3 vw_send: To DATATAKING: set ra 248.51 2008-Apr-28 18:51:51 LOG3 vw_send: To DATATAKING: set dec 14.5751947410 2008-Apr-28 18:51:51 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-28 18:51:51 LOG3 vw_send: To DATATAKING: pnt tr 248.51 14.5751947410 -CF 2008-Apr-28 18:51:51 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-28 18:51:51 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-28 18:51:51 LOG5 finish_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2008-Apr-28 18:51:51 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-28 18:51:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 18:51:52 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-28 18:51:52 LOG5 end_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2008-Apr-28 18:51:52 LOG1 fixed_driftmap: Parameters: HA = -00:58:59.4 Start = 08:54:29.9 LST = 08:53:55.9 diff = 34.1 secs 2008-Apr-28 18:51:52 INFO2 fixed_driftmap: Waiting 32.1 seconds for RA 9:53:29 2008-Apr-28 18:51:52 INFO2 lstwait: Waiting for 32 secs from LST 08:53:56 to LST 08:54:28 ... 2008-Apr-28 18:51:52 LOG4 send_obs_status: To obs_status: <1> TASKTIME 31.980833818774265 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-28 18:51:52 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-28 18:51:52 LOG5 begin_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2008-Apr-28 18:51:52 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_031" 2008-Apr-28 18:51:52 LOG3 WAPP=1-save_rfcalc: Channel 5: Sky freq = 1381.113862 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-28 18:51:52 LOG4 got_cormsg: From DATATAKING: set ra 248.51 2008-Apr-28 18:51:52 LOG4 got_cormsg: From DATATAKING: vw% 248.51 2008-Apr-28 18:51:52 LOG4 got_cormsg: From DATATAKING: 2008-Apr-28 18:51:52 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 18:51:52 LOG4 got_cormsg: From DATATAKING: set dec 14.5751947410 2008-Apr-28 18:51:52 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-28 18:51:52 LOG4 got_cormsg: From DATATAKING: pnt tr 248.51 14.5751947410 -CF 2008-Apr-28 18:51:52 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-28 18:51:52 LOG4 got_cormsg: From DATATAKING: 14.5751947410 2008-Apr-28 18:51:52 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2008-Apr-28 18:51:56 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.923 and 1.137 2008-Apr-28 18:52:24 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-28 18:52:24 LOG5 end_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2008-Apr-28 18:52:24 LOG4 lstwait: Finished waiting, the gui caused difference: 0.018406639994594798 2008-Apr-28 18:52:24 INFO3 lstwait: Finished waiting 2008-Apr-28 18:52:24 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-28 18:52:24 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-28 18:52:24 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-28 18:52:24 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-28 18:52:24 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-28 18:52:24 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-28 18:52:24 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-28 18:52:24 LOG5 begin_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2008-Apr-28 18:52:24 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-28 18:52:24 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-28 18:52:24 INFO2 take_spectra: Starting WAPP scan: 811900091 2008-Apr-28 18:52:24 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-28 18:52:24 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-28 18:52:24 LOG5 begin_task: Level: (4) ID = <10132> Status = 0 0 0 0 ok 2008-Apr-28 18:52:24 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-28 18:52:24 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82345.00 2008-Apr-28 18:52:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.113862 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-28 18:52:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.113862 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:52:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.113862 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:52:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.113862 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:52:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.113862 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 18:52:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.113862 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-28 18:52:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.113862 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-28 18:52:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.113862 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-28 18:52:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.113862 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-28 19:12:25 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-28 19:12:25 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-28 19:12:25 LOG5 end_task: Level: (4) ID = <10132> Status = 0 0 0 0 ok 2008-Apr-28 19:12:25 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-28 19:12:25 LOG5 end_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2008-Apr-28 19:12:25 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-28 19:12:25 LOG5 finish_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2008-Apr-28 19:12:25 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-28 19:12:25 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-28 19:12:25 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-28 19:12:25 LOG5 end_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2008-Apr-28 19:12:25 COMMAND run_command_line: EXECUTING command 11: 'FIXEDDRIFT az=239.34 alfaangle=-39.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_033 ra=95300.00 dec=230500.00' 2008-Apr-28 19:12:25 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-28 19:12:26 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-28 19:12:26 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 239.34 -39.6 hcorcal 5 tracking no first 1 AGES3193_p2_033 95300.00 230500.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-28 19:12:26 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-28 19:12:26 LOG5 begin_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2008-Apr-28 19:12:26 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES3193_p2_031' 2008-Apr-28 19:12:26 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-28 19:12:26 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p2_033} 2008-Apr-28 19:12:26 INFO3 fixed_driftmap: Sending telescope to Az = 239.34 and ZA = 9.63 2008-Apr-28 19:12:26 LOG3 track_source: Calling 'track_source AGES3193_p2_033 239.34 9.6346031430 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-28 19:12:26 START begin_task: Starting task 'sending tracking commands' 2008-Apr-28 19:12:26 LOG5 begin_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2008-Apr-28 19:12:26 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_033} INFO {Slewing to source 'AGES3193_p2_033' ...} 2008-Apr-28 19:12:26 INFO1 track_source: Starting to track AGES3193_p2_033 2008-Apr-28 19:12:26 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_033" 2008-Apr-28 19:12:26 LOG3 vw_send: To DATATAKING: set ra 239.34 2008-Apr-28 19:12:26 LOG3 vw_send: To DATATAKING: set dec 9.6346031430 2008-Apr-28 19:12:26 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-28 19:12:26 LOG3 vw_send: To DATATAKING: pnt tr 239.34 9.6346031430 -CF 2008-Apr-28 19:12:26 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-28 19:12:26 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-28 19:12:26 LOG5 finish_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2008-Apr-28 19:12:26 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-28 19:12:26 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 19:12:26 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-28 19:12:26 LOG5 end_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2008-Apr-28 19:12:26 START begin_task: Starting task 'rotate ALFA to -39.6 degrees' 2008-Apr-28 19:12:26 LOG5 begin_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2008-Apr-28 19:12:26 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -39.6 degrees ...} 2008-Apr-28 19:12:26 INFO2 rotate_alfa: ALFA commanded to -39.6 degrees 2008-Apr-28 19:12:26 LOG3 sock_errsend: To ALFAMOTOR: POSITION -39.6 REPLY 2008-Apr-28 19:12:26 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-28 19:12:26 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-28 19:12:26 LOG5 begin_task: Level: (4) ID = <10136> Status = 0 0 0 0 ok 2008-Apr-28 19:12:26 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_033" 2008-Apr-28 19:12:26 LOG4 got_cormsg: From DATATAKING: set ra 239.34 2008-Apr-28 19:12:26 LOG4 got_cormsg: From DATATAKING: set dec 9.6346031430 2008-Apr-28 19:12:26 LOG4 got_cormsg: From DATATAKING: vw% 239.34 2008-Apr-28 19:12:26 LOG4 got_cormsg: From DATATAKING: vw% 9.6346031430 2008-Apr-28 19:12:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 19:12:26 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-28 19:12:26 LOG4 got_cormsg: From DATATAKING: pnt tr 239.34 9.6346031430 -CF 2008-Apr-28 19:12:26 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-28 19:12:26 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2008-Apr-28 19:12:34 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-28 19:12:34 INFO3 alfa_motor: ALFA rotator in-position -39.60 degrees 2008-Apr-28 19:12:34 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-28 19:12:34 LOG5 end_task: Level: (4) ID = <10136> Status = 0 0 0 0 ok 2008-Apr-28 19:12:34 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-28 19:12:34 STOP finish_task: Finishing task 'rotate ALFA to -39.6 degrees' 2008-Apr-28 19:12:34 LOG5 finish_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2008-Apr-28 19:12:34 INFO2 finish_task: DONE finished configuration: rotating ALFA to -39.6 degrees 2008-Apr-28 19:12:34 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 19:12:34 STOP end_task: Finishing task 'rotate ALFA to -39.6 degrees' with status 'OK' 2008-Apr-28 19:12:34 LOG5 end_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2008-Apr-28 19:12:34 START begin_task: Starting task 'waiting on telescope' 2008-Apr-28 19:12:34 LOG5 begin_task: Level: (3) ID = <10137> Status = 0 0 0 0 ok 2008-Apr-28 19:12:34 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-28 19:12:34 LOG3 waittrk: Start waittrk 5 2008-Apr-28 19:12:34 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-28 19:12:34 LOG5 begin_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2008-Apr-28 19:12:39 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-28 19:12:39 LOG5 end_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2008-Apr-28 19:12:39 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-28 19:12:39 LOG5 begin_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2008-Apr-28 19:14:36 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-28 19:14:36 LOG5 end_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2008-Apr-28 19:14:36 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-28 19:14:36 INFO2 waittrk: Now tracking AGES3193_p2_033 2008-Apr-28 19:14:36 LOG4 waittrk: Current telescope position: Az = 238.85 ZA = 9.64 2008-Apr-28 19:14:36 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-28 19:14:36 LOG5 finish_task: Level: (3) ID = <10137> Status = 0 0 0 0 ok 2008-Apr-28 19:14:36 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-28 19:14:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 19:14:36 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-28 19:14:36 LOG5 end_task: Level: (3) ID = <10137> Status = 0 0 0 0 ok 2008-Apr-28 19:14:36 START begin_task: Starting task 'selecting calibration type' 2008-Apr-28 19:14:36 LOG5 begin_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2008-Apr-28 19:14:36 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-28 19:14:36 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-28 19:14:36 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 19:14:36 START begin_task: Starting task 'waiting on setcal' 2008-Apr-28 19:14:36 LOG5 begin_task: Level: (4) ID = <10141> Status = 0 0 0 0 ok 2008-Apr-28 19:14:36 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-28 19:14:36 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 19:14:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 19:14:37 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-28 19:14:37 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-28 19:14:37 LOG5 end_task: Level: (4) ID = <10141> Status = 0 0 0 0 ok 2008-Apr-28 19:14:37 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-28 19:14:37 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-28 19:14:37 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-28 19:14:37 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-28 19:14:37 LOG5 begin_task: Level: (4) ID = <10142> Status = 0 0 0 0 ok 2008-Apr-28 19:14:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 19:14:37 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-28 19:14:37 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-28 19:14:37 LOG5 end_task: Level: (4) ID = <10142> Status = 0 0 0 0 ok 2008-Apr-28 19:14:37 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-28 19:14:37 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-28 19:14:37 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-28 19:14:37 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-28 19:14:37 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-28 19:14:37 LOG5 begin_task: Level: (4) ID = <10143> Status = 0 0 0 0 ok 2008-Apr-28 19:14:37 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-28 19:14:37 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-28 19:14:37 LOG5 end_task: Level: (4) ID = <10143> Status = 0 0 0 0 ok 2008-Apr-28 19:14:37 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-28 19:14:37 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-28 19:14:37 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-28 19:14:37 LOG5 finish_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2008-Apr-28 19:14:37 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-28 19:14:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 19:14:37 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-28 19:14:37 LOG5 end_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2008-Apr-28 19:14:37 LOG5 dopset_later: Calling 'dopset_later 43.300824174572455' 2008-Apr-28 19:14:37 INFO3 dopset_later: Setting Doppler correction for 19:15:20 (43.3 seconds from now) 2008-Apr-28 19:14:37 LOG5 antvel: Calling 'antvel 239.340000 9.634603 F 43.300824174572455' 2008-Apr-28 19:14:37 LOG2 antvel: Parameters to Doppler: Heliocentric 83720 2008 119 0.0 2008-Apr-28 19:14:37 INFO5 antvel: Computed antenna velocity: +28.16789 km/s 2008-Apr-28 19:14:37 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=28.167894148999999 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-28 19:14:37 INFO4 dopset_gen: New sky frequencies: 1381.113662 1381.113662 1381.113662 1381.113662 1381.113662 1381.113662 1381.113662 1381.113662 1381.113662 2008-Apr-28 19:14:37 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.113662 sky0=1381.113662 sky1=1381.113662 sky2=1381.113662 sky3=1381.113662 sky4=1381.113662 sky5=1381.113662 sky6=1381.113662 sky7=1381.113662 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-28 19:14:37 LOG2 dopset_gen: Result from 'sky2syn': 1631.113662 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-28 19:14:37 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631113662.0} 2008-Apr-28 19:14:37 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 19:14:37 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-28 19:14:37 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-28 19:14:37 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:20.7 Dec = +23:05:02.2 2008-Apr-28 19:14:37 LOG3 track_source: Calling 'track_source AGES3193_p2_033 095220.7 230502.2 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-28 19:14:37 START begin_task: Starting task 'sending tracking commands' 2008-Apr-28 19:14:37 LOG5 begin_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2008-Apr-28 19:14:37 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_033} INFO {Slewing to source 'AGES3193_p2_033' ...} 2008-Apr-28 19:14:37 INFO1 track_source: Starting to track AGES3193_p2_033 2008-Apr-28 19:14:37 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_033" 2008-Apr-28 19:14:37 LOG3 vw_send: To DATATAKING: set ra 095220.7 2008-Apr-28 19:14:37 LOG3 vw_send: To DATATAKING: set dec 230502.2 2008-Apr-28 19:14:37 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-28 19:14:37 LOG3 vw_send: To DATATAKING: pnt tr 095220.7 230502.2 -CJ 2008-Apr-28 19:14:38 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-28 19:14:38 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-28 19:14:38 LOG5 finish_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2008-Apr-28 19:14:38 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-28 19:14:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 19:14:38 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-28 19:14:38 LOG5 end_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2008-Apr-28 19:14:38 START begin_task: Starting task 'waiting on telescope' 2008-Apr-28 19:14:38 LOG5 begin_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2008-Apr-28 19:14:38 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-28 19:14:38 LOG3 waittrk: Start waittrk 5 2008-Apr-28 19:14:38 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-28 19:14:38 LOG5 begin_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2008-Apr-28 19:14:38 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631113662.0} 2008-Apr-28 19:14:38 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 19:14:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 19:14:38 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_033" 2008-Apr-28 19:14:38 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-28 19:14:38 LOG4 got_cormsg: From DATATAKING: set ra 095220.7 2008-Apr-28 19:14:38 LOG4 got_cormsg: From DATATAKING: set dec 230502.2 2008-Apr-28 19:14:38 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-28 19:14:38 LOG4 got_cormsg: From DATATAKING: pnt tr 095220.7 230502.2 -CJ 2008-Apr-28 19:14:38 LOG4 got_cormsg: From DATATAKING: 095220.7 2008-Apr-28 19:14:38 LOG4 got_cormsg: From DATATAKING: vw% 230502.2 2008-Apr-28 19:14:38 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2008-Apr-28 19:14:38 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-28 19:14:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 19:14:43 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-28 19:14:43 LOG5 end_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2008-Apr-28 19:14:43 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-28 19:14:43 LOG5 begin_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2008-Apr-28 19:14:46 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-28 19:14:46 LOG5 end_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2008-Apr-28 19:14:46 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-28 19:14:46 INFO2 waittrk: Now tracking AGES3193_p2_033 2008-Apr-28 19:14:46 LOG4 waittrk: Current telescope position: Az = 238.79 ZA = 9.62 2008-Apr-28 19:14:46 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-28 19:14:46 LOG5 finish_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2008-Apr-28 19:14:46 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-28 19:14:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 19:14:46 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-28 19:14:46 LOG5 end_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2008-Apr-28 19:14:46 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-28 19:14:46 LOG5 begin_task: Level: (3) ID = <10148> Status = 0 0 0 0 ok 2008-Apr-28 19:14:46 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-28 19:14:46 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-28 19:14:46 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-28 19:14:46 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-28 19:14:46 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 19:14:46 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-28 19:14:46 LOG5 begin_task: Level: (4) ID = <10149> Status = 0 0 0 0 ok 2008-Apr-28 19:14:46 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-28 19:14:46 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 19:14:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 19:14:46 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-28 19:14:46 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-28 19:14:46 LOG5 end_task: Level: (4) ID = <10149> Status = 0 0 0 0 ok 2008-Apr-28 19:14:46 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-28 19:14:46 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-28 19:14:46 LOG5 begin_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2008-Apr-28 19:14:46 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-28 19:14:46 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-28 19:14:46 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-28 19:14:46 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-28 19:14:46 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-28 19:14:46 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-28 19:14:46 LOG5 begin_task: Level: (5) ID = <10151> Status = 0 0 0 0 ok 2008-Apr-28 19:14:46 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-28 19:14:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 19:14:47 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 1 dB --- beam 1: 7 6 dB 2008-Apr-28 19:14:47 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-28 19:14:47 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 6 dB 2008-Apr-28 19:14:47 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 3 3 dB 2008-Apr-28 19:14:47 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-28 19:14:47 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-28 19:14:47 LOG5 end_task: Level: (5) ID = <10151> Status = 0 0 0 0 ok 2008-Apr-28 19:14:47 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.897 0.952 ALFA beam 1: 1.103 1.014 2008-Apr-28 19:14:47 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.012 0.908 ALFA beam 3: 0.975 1.022 2008-Apr-28 19:14:47 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.904 0.940 ALFA beam 5: 1.045 0.910 2008-Apr-28 19:14:47 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.045 1.022 ALFA beam 7: 0.909 0.907 2008-Apr-28 19:14:47 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-28 19:14:47 LOG5 finish_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2008-Apr-28 19:14:47 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-28 19:14:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 19:14:47 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-28 19:14:47 LOG5 end_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2008-Apr-28 19:14:47 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-28 19:14:47 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-28 19:14:47 LOG5 finish_task: Level: (3) ID = <10148> Status = 0 0 0 0 ok 2008-Apr-28 19:14:47 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-28 19:14:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 19:14:47 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-28 19:14:47 LOG5 end_task: Level: (3) ID = <10148> Status = 0 0 0 0 ok 2008-Apr-28 19:14:47 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Steve Schnei 2008-Apr-28 19:14:47 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Steve Schnei 2008-Apr-28 19:14:47 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Steve Schnei 2008-Apr-28 19:14:47 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Steve Schnei 2008-Apr-28 19:14:47 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-28 19:14:47 START begin_task: Starting task 'WAPP calibration' 2008-Apr-28 19:14:47 LOG5 begin_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2008-Apr-28 19:14:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-28 19:14:47 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-28 19:14:47 START begin_task: Starting task 'selecting calibration type' 2008-Apr-28 19:14:47 LOG5 begin_task: Level: (4) ID = <10153> Status = 0 0 0 0 ok 2008-Apr-28 19:14:47 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-28 19:14:47 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-28 19:14:47 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 19:14:47 START begin_task: Starting task 'waiting on setcal' 2008-Apr-28 19:14:47 LOG5 begin_task: Level: (5) ID = <10154> Status = 0 0 0 0 ok 2008-Apr-28 19:14:47 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Steve Schnei' 2008-Apr-28 19:14:47 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-28 19:14:47 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 19:14:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 19:14:48 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-28 19:14:48 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-28 19:14:48 LOG5 end_task: Level: (5) ID = <10154> Status = 0 0 0 0 ok 2008-Apr-28 19:14:48 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-28 19:14:48 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-28 19:14:48 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-28 19:14:48 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-28 19:14:48 LOG5 begin_task: Level: (5) ID = <10155> Status = 0 0 0 0 ok 2008-Apr-28 19:14:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 19:14:48 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-28 19:14:48 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-28 19:14:48 LOG5 end_task: Level: (5) ID = <10155> Status = 0 0 0 0 ok 2008-Apr-28 19:14:48 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-28 19:14:48 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-28 19:14:48 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-28 19:14:48 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-28 19:14:48 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-28 19:14:48 LOG5 begin_task: Level: (5) ID = <10156> Status = 0 0 0 0 ok 2008-Apr-28 19:14:48 NOTE WAPPDATA-new_file: New FITS file: wapp.20080428.a2048.0002.fits 2008-Apr-28 19:14:48 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-28 19:14:48 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-28 19:14:48 LOG5 end_task: Level: (5) ID = <10156> Status = 0 0 0 0 ok 2008-Apr-28 19:14:48 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-28 19:14:48 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-28 19:14:48 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-28 19:14:48 LOG5 finish_task: Level: (4) ID = <10153> Status = 0 0 0 0 ok 2008-Apr-28 19:14:48 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-28 19:14:48 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 19:14:48 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-28 19:14:48 LOG5 end_task: Level: (4) ID = <10153> Status = 0 0 0 0 ok 2008-Apr-28 19:14:48 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-28 19:14:48 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-28 19:14:48 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-28 19:14:48 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-28 19:14:48 LOG5 begin_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2008-Apr-28 19:14:48 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080428.a2048.0002.fits} 2008-Apr-28 19:14:48 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-28 19:14:48 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-28 19:14:48 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-28 19:14:48 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-28 19:14:48 LOG5 end_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2008-Apr-28 19:14:48 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-28 19:14:48 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-28 19:14:48 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-28 19:14:48 LOG5 begin_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2008-Apr-28 19:14:48 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-28 19:14:48 LOG5 log_alfabeam: Parameters: 9.8724166666666662 23.083944444444448 9.282119 2008.3279998162091 -39.600105 2008-Apr-28 19:14:48 LOG4 log_alfabeam: ALFABEAM 0 9.872416666666666 23.083944444444448 2008-Apr-28 19:14:48 LOG4 log_alfabeam: ALFABEAM 1 9.872867545269594 22.990910193028185 2008-Apr-28 19:14:48 LOG4 log_alfabeam: ALFABEAM 2 9.879145699752303 23.052413563075845 2008-Apr-28 19:14:48 LOG4 log_alfabeam: ALFABEAM 3 9.878657394678877 23.146266619089896 2008-Apr-28 19:14:48 LOG4 log_alfabeam: ALFABEAM 4 9.871894484276073 23.177210098849432 2008-Apr-28 19:14:48 LOG4 log_alfabeam: ALFABEAM 5 9.865684818880993 23.114299452636136 2008-Apr-28 19:14:48 LOG4 log_alfabeam: ALFABEAM 6 9.866169089065480 23.021848901088447 2008-Apr-28 19:14:48 INFO2 take_spectra: Starting WAPP scan: 811900092 2008-Apr-28 19:14:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-28 19:14:49 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-28 19:14:49 LOG5 begin_task: Level: (5) ID = <10159> Status = 0 0 0 0 ok 2008-Apr-28 19:14:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-28 19:14:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83690.00 2008-Apr-28 19:14:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.113662 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-28 19:14:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.113662 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 19:14:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.113662 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 19:14:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.113662 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 19:14:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.113662 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 19:14:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.113662 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-28 19:14:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.113662 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-28 19:14:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.113662 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-28 19:14:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.113662 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-28 19:14:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-28 19:14:55 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-28 19:14:55 LOG5 end_task: Level: (5) ID = <10159> Status = 0 0 0 0 ok 2008-Apr-28 19:14:55 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-28 19:14:55 LOG5 end_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2008-Apr-28 19:14:55 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-28 19:14:55 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-28 19:14:55 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-28 19:14:55 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-28 19:14:55 LOG5 begin_task: Level: (4) ID = <10160> Status = 0 0 0 0 ok 2008-Apr-28 19:14:55 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-28 19:14:55 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-28 19:14:55 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-28 19:14:55 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-28 19:14:55 LOG5 end_task: Level: (4) ID = <10160> Status = 0 0 0 0 ok 2008-Apr-28 19:14:55 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-28 19:14:55 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-28 19:14:55 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-28 19:14:55 LOG5 begin_task: Level: (4) ID = <10161> Status = 0 0 0 0 ok 2008-Apr-28 19:14:55 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-28 19:14:55 LOG5 log_alfabeam: Parameters: 9.8724166666666662 23.083944444444448 9.284347 2008.3280000697139 -39.600105 2008-Apr-28 19:14:55 LOG4 log_alfabeam: ALFABEAM 0 9.872416666666663 23.083944444444448 2008-Apr-28 19:14:55 LOG4 log_alfabeam: ALFABEAM 1 9.872878891236910 22.990921242404202 2008-Apr-28 19:14:55 LOG4 log_alfabeam: ALFABEAM 2 9.879149575615285 23.052569777250511 2008-Apr-28 19:14:55 LOG4 log_alfabeam: ALFABEAM 3 9.878649692595205 23.146413268115079 2008-Apr-28 19:14:55 LOG4 log_alfabeam: ALFABEAM 4 9.871882889319531 23.177198043713673 2008-Apr-28 19:14:55 LOG4 log_alfabeam: ALFABEAM 5 9.865681095199829 23.114139952891460 2008-Apr-28 19:14:55 LOG4 log_alfabeam: ALFABEAM 6 9.866176726241926 23.021702907007320 2008-Apr-28 19:14:55 INFO2 take_spectra: Starting WAPP scan: 811900093 2008-Apr-28 19:14:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-28 19:14:56 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-28 19:14:56 LOG5 begin_task: Level: (5) ID = <10162> Status = 0 0 0 0 ok 2008-Apr-28 19:14:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-28 19:14:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83697.00 2008-Apr-28 19:15:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.493 > 1.4)! 2008-Apr-28 19:15:01 LOG4 check_wapp_levels: WAPP-1 power levels: 1.238 1.220 1.493 1.389 2008-Apr-28 19:15:01 LOG4 check_wapp_levels: WAPP-2 power levels: 1.386 1.267 1.353 1.409 2008-Apr-28 19:15:01 LOG4 check_wapp_levels: WAPP-3 power levels: 1.272 1.315 1.443 1.219 2008-Apr-28 19:15:01 LOG4 check_wapp_levels: WAPP-4 power levels: 1.449 1.423 1.262 1.264 2008-Apr-28 19:15:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.113662 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-28 19:15:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.113662 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 19:15:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.113662 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 19:15:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.113662 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 19:15:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.113662 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 19:15:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.113662 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-28 19:15:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.113662 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-28 19:15:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.113662 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-28 19:15:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.113662 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-28 19:15:02 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-28 19:15:02 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-28 19:15:02 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-28 19:15:02 LOG5 end_task: Level: (5) ID = <10162> Status = 0 0 0 0 ok 2008-Apr-28 19:15:02 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-28 19:15:02 LOG5 end_task: Level: (4) ID = <10161> Status = 0 0 0 0 ok 2008-Apr-28 19:15:02 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-28 19:15:02 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-28 19:15:02 LOG5 finish_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2008-Apr-28 19:15:02 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-28 19:15:02 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 19:15:02 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-28 19:15:02 LOG5 end_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2008-Apr-28 19:15:02 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-28 19:15:02 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 239.34 and ZA = 9.63 2008-Apr-28 19:15:02 LOG3 track_source: Calling 'track_source AGES3193_p2_033 239.34 9.6346031430 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-28 19:15:02 START begin_task: Starting task 'sending tracking commands' 2008-Apr-28 19:15:02 LOG5 begin_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2008-Apr-28 19:15:02 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_033} INFO {Slewing to source 'AGES3193_p2_033' ...} 2008-Apr-28 19:15:02 INFO1 track_source: Starting to track AGES3193_p2_033 2008-Apr-28 19:15:02 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_033" 2008-Apr-28 19:15:02 LOG3 vw_send: To DATATAKING: set ra 239.34 2008-Apr-28 19:15:02 LOG3 vw_send: To DATATAKING: set dec 9.6346031430 2008-Apr-28 19:15:02 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-28 19:15:02 LOG3 vw_send: To DATATAKING: pnt tr 239.34 9.6346031430 -CF 2008-Apr-28 19:15:02 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-28 19:15:02 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-28 19:15:02 LOG5 finish_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2008-Apr-28 19:15:02 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-28 19:15:02 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 19:15:03 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-28 19:15:03 LOG5 end_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2008-Apr-28 19:15:03 LOG1 fixed_driftmap: Parameters: HA = -00:36:00.3 Start = 09:17:29.0 LST = 09:17:10.7 diff = 18.3 secs 2008-Apr-28 19:15:03 INFO2 fixed_driftmap: Waiting 16.3 seconds for RA 9:53:29 2008-Apr-28 19:15:03 INFO2 lstwait: Waiting for 16.3 secs from LST 09:17:11 to LST 09:17:27 ... 2008-Apr-28 19:15:03 LOG4 send_obs_status: To obs_status: <1> TASKTIME 16.304337194732248 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-28 19:15:03 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-28 19:15:03 LOG5 begin_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2008-Apr-28 19:15:03 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_033" 2008-Apr-28 19:15:03 LOG4 got_cormsg: From DATATAKING: set ra 239.34 2008-Apr-28 19:15:03 LOG4 got_cormsg: From DATATAKING: set dec 9.6346031430 2008-Apr-28 19:15:03 LOG4 got_cormsg: From DATATAKING: vw% 239.34 2008-Apr-28 19:15:03 LOG4 got_cormsg: From DATATAKING: vw% 9.6346031430 2008-Apr-28 19:15:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 19:15:03 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-28 19:15:03 LOG4 got_cormsg: From DATATAKING: pnt tr 239.34 9.6346031430 -CF 2008-Apr-28 19:15:03 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-28 19:15:03 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2008-Apr-28 19:15:07 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.898 and 1.100 2008-Apr-28 19:15:19 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-28 19:15:19 LOG5 end_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2008-Apr-28 19:15:19 LOG4 lstwait: Finished waiting, the gui caused difference: 0.69702355999652355 2008-Apr-28 19:15:19 INFO3 lstwait: Finished waiting 2008-Apr-28 19:15:19 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-28 19:15:19 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-28 19:15:19 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-28 19:15:19 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-28 19:15:19 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-28 19:15:19 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-28 19:15:19 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-28 19:15:19 LOG5 begin_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2008-Apr-28 19:15:19 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-28 19:15:19 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-28 19:15:19 INFO2 take_spectra: Starting WAPP scan: 811900094 2008-Apr-28 19:15:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-28 19:15:20 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-28 19:15:20 LOG5 begin_task: Level: (4) ID = <10166> Status = 0 0 0 0 ok 2008-Apr-28 19:15:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-28 19:15:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83721.00 2008-Apr-28 19:15:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.113662 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-28 19:15:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.113662 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 19:15:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.113662 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 19:15:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.113662 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 19:15:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.113662 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 19:15:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.113662 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-28 19:15:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.113662 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-28 19:15:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.113662 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-28 19:15:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.113662 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-28 19:32:10 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 19:32:10.296 (seconds: 70330.296)!} 2008-Apr-28 19:32:10 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 19:32:10.296 (seconds: 70330.296)! 2008-Apr-28 19:32:11 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 70329.0 to 70330.0! 2008-Apr-28 19:32:12 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (70329.0 - 70331.0)! 2008-Apr-28 19:35:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-28 19:35:21 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-28 19:35:21 LOG5 end_task: Level: (4) ID = <10166> Status = 0 0 0 0 ok 2008-Apr-28 19:35:21 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-28 19:35:21 LOG5 end_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2008-Apr-28 19:35:21 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-28 19:35:21 LOG5 finish_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2008-Apr-28 19:35:21 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-28 19:35:21 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-28 19:35:21 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-28 19:35:21 LOG5 end_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2008-Apr-28 19:35:21 COMMAND run_command_line: EXECUTING command 15: 'FIXEDDRIFT az=212.67 alfaangle=-10.7 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_035 ra=95300.00 dec=230200.00' 2008-Apr-28 19:35:21 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-28 19:35:22 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-28 19:35:22 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 212.67 -10.7 hcorcal 5 tracking no first 1 AGES3193_p2_035 95300.00 230200.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-28 19:35:22 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-28 19:35:22 LOG5 begin_task: Level: (2) ID = <10167> Status = 0 0 0 0 ok 2008-Apr-28 19:35:22 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES3193_p2_033' 2008-Apr-28 19:35:22 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-28 19:35:22 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p2_035} 2008-Apr-28 19:35:22 INFO3 fixed_driftmap: Sending telescope to Az = 212.67 and ZA = 5.55 2008-Apr-28 19:35:22 LOG3 track_source: Calling 'track_source AGES3193_p2_035 212.67 5.5473048048 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-28 19:35:22 START begin_task: Starting task 'sending tracking commands' 2008-Apr-28 19:35:22 LOG5 begin_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2008-Apr-28 19:35:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_035} INFO {Slewing to source 'AGES3193_p2_035' ...} 2008-Apr-28 19:35:22 INFO1 track_source: Starting to track AGES3193_p2_035 2008-Apr-28 19:35:22 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_035" 2008-Apr-28 19:35:22 LOG3 vw_send: To DATATAKING: set ra 212.67 2008-Apr-28 19:35:22 LOG3 vw_send: To DATATAKING: set dec 5.5473048048 2008-Apr-28 19:35:22 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-28 19:35:22 LOG3 vw_send: To DATATAKING: pnt tr 212.67 5.5473048048 -CF 2008-Apr-28 19:35:22 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-28 19:35:22 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-28 19:35:22 LOG5 finish_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2008-Apr-28 19:35:22 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-28 19:35:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 19:35:22 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-28 19:35:22 LOG5 end_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2008-Apr-28 19:35:22 START begin_task: Starting task 'rotate ALFA to -10.7 degrees' 2008-Apr-28 19:35:22 LOG5 begin_task: Level: (3) ID = <10169> Status = 0 0 0 0 ok 2008-Apr-28 19:35:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -10.7 degrees ...} 2008-Apr-28 19:35:22 INFO2 rotate_alfa: ALFA commanded to -10.7 degrees 2008-Apr-28 19:35:22 LOG3 sock_errsend: To ALFAMOTOR: POSITION -10.7 REPLY 2008-Apr-28 19:35:22 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-28 19:35:22 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-28 19:35:22 LOG5 begin_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2008-Apr-28 19:35:22 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_035" 2008-Apr-28 19:35:22 LOG4 got_cormsg: From DATATAKING: set ra 212.67 2008-Apr-28 19:35:22 LOG4 got_cormsg: From DATATAKING: set dec 5.5473048048 2008-Apr-28 19:35:22 LOG4 got_cormsg: From DATATAKING: vw% 212.67 2008-Apr-28 19:35:22 LOG4 got_cormsg: From DATATAKING: vw% 5.5473048048 2008-Apr-28 19:35:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 19:35:22 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-28 19:35:22 LOG4 got_cormsg: From DATATAKING: pnt tr 212.67 5.5473048048 -CF 2008-Apr-28 19:35:22 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-28 19:35:22 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-28 19:35:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 19:35:39 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-28 19:35:39 INFO3 alfa_motor: ALFA rotator in-position -10.70 degrees 2008-Apr-28 19:35:39 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-28 19:35:39 LOG5 end_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2008-Apr-28 19:35:40 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-28 19:35:40 STOP finish_task: Finishing task 'rotate ALFA to -10.7 degrees' 2008-Apr-28 19:35:40 LOG5 finish_task: Level: (3) ID = <10169> Status = 0 0 0 0 ok 2008-Apr-28 19:35:40 INFO2 finish_task: DONE finished configuration: rotating ALFA to -10.7 degrees 2008-Apr-28 19:35:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 19:35:40 STOP end_task: Finishing task 'rotate ALFA to -10.7 degrees' with status 'OK' 2008-Apr-28 19:35:40 LOG5 end_task: Level: (3) ID = <10169> Status = 0 0 0 0 ok 2008-Apr-28 19:35:40 START begin_task: Starting task 'waiting on telescope' 2008-Apr-28 19:35:40 LOG5 begin_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2008-Apr-28 19:35:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-28 19:35:40 LOG3 waittrk: Start waittrk 5 2008-Apr-28 19:35:40 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-28 19:35:40 LOG5 begin_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2008-Apr-28 19:35:45 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-28 19:35:45 LOG5 end_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2008-Apr-28 19:35:45 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-28 19:35:45 LOG5 begin_task: Level: (4) ID = <10173> Status = 0 0 0 0 ok 2008-Apr-28 19:37:11 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-28 19:37:11 LOG5 end_task: Level: (4) ID = <10173> Status = 0 0 0 0 ok 2008-Apr-28 19:37:11 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-28 19:37:11 INFO2 waittrk: Now tracking AGES3193_p2_035 2008-Apr-28 19:37:11 LOG4 waittrk: Current telescope position: Az = 212.24 ZA = 5.57 2008-Apr-28 19:37:11 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-28 19:37:11 LOG5 finish_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2008-Apr-28 19:37:11 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-28 19:37:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 19:37:11 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-28 19:37:11 LOG5 end_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2008-Apr-28 19:37:11 START begin_task: Starting task 'selecting calibration type' 2008-Apr-28 19:37:11 LOG5 begin_task: Level: (3) ID = <10174> Status = 0 0 0 0 ok 2008-Apr-28 19:37:11 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-28 19:37:11 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-28 19:37:11 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 19:37:11 START begin_task: Starting task 'waiting on setcal' 2008-Apr-28 19:37:11 LOG5 begin_task: Level: (4) ID = <10175> Status = 0 0 0 0 ok 2008-Apr-28 19:37:11 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-28 19:37:11 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 19:37:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 19:37:12 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-28 19:37:12 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-28 19:37:12 LOG5 end_task: Level: (4) ID = <10175> Status = 0 0 0 0 ok 2008-Apr-28 19:37:12 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-28 19:37:12 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-28 19:37:12 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-28 19:37:12 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-28 19:37:12 LOG5 begin_task: Level: (4) ID = <10176> Status = 0 0 0 0 ok 2008-Apr-28 19:37:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 19:37:12 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-28 19:37:12 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-28 19:37:12 LOG5 end_task: Level: (4) ID = <10176> Status = 0 0 0 0 ok 2008-Apr-28 19:37:12 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-28 19:37:12 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-28 19:37:12 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-28 19:37:12 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-28 19:37:12 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-28 19:37:12 LOG5 begin_task: Level: (4) ID = <10177> Status = 0 0 0 0 ok 2008-Apr-28 19:37:12 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-28 19:37:12 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-28 19:37:12 LOG5 end_task: Level: (4) ID = <10177> Status = 0 0 0 0 ok 2008-Apr-28 19:37:12 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-28 19:37:12 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-28 19:37:12 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-28 19:37:12 LOG5 finish_task: Level: (3) ID = <10174> Status = 0 0 0 0 ok 2008-Apr-28 19:37:12 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-28 19:37:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 19:37:12 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-28 19:37:12 LOG5 end_task: Level: (3) ID = <10174> Status = 0 0 0 0 ok 2008-Apr-28 19:37:12 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2008-Apr-28 19:37:12 INFO2 astwait: Waiting for 5 seconds from 23:37:12 to 23:37:17 UTC ... 2008-Apr-28 19:37:12 LOG4 send_obs_status: To obs_status: <1> TASKTIME 5 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-28 19:37:12 START begin_task: Starting task 'waiting on waiting for AST time' 2008-Apr-28 19:37:12 LOG5 begin_task: Level: (3) ID = <10178> Status = 0 0 0 0 ok 2008-Apr-28 19:37:17 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2008-Apr-28 19:37:17 LOG5 end_task: Level: (3) ID = <10178> Status = 0 0 0 0 ok 2008-Apr-28 19:37:17 INFO3 astwait: Finished waiting 2008-Apr-28 19:37:17 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-28 19:37:17 LOG5 dopset_later: Calling 'dopset_later 60.885116611206954' 2008-Apr-28 19:37:17 INFO3 dopset_later: Setting Doppler correction for 19:38:17 (60.9 seconds from now) 2008-Apr-28 19:37:17 LOG5 antvel: Calling 'antvel 212.670000 5.547305 F 60.885116611206954' 2008-Apr-28 19:37:17 LOG2 antvel: Parameters to Doppler: Heliocentric 85097 2008 119 0.0 2008-Apr-28 19:37:17 INFO5 antvel: Computed antenna velocity: +28.21208 km/s 2008-Apr-28 19:37:17 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=28.212080652499999 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-28 19:37:17 INFO4 dopset_gen: New sky frequencies: 1381.113458 1381.113458 1381.113458 1381.113458 1381.113458 1381.113458 1381.113458 1381.113458 1381.113458 2008-Apr-28 19:37:17 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.113458 sky0=1381.113458 sky1=1381.113458 sky2=1381.113458 sky3=1381.113458 sky4=1381.113458 sky5=1381.113458 sky6=1381.113458 sky7=1381.113458 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-28 19:37:17 LOG2 dopset_gen: Result from 'sky2syn': 1631.113458 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-28 19:37:17 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631113458.0} 2008-Apr-28 19:37:17 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 19:37:17 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-28 19:37:17 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-28 19:37:17 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:03.1 Dec = +23:02:02.1 2008-Apr-28 19:37:17 LOG3 track_source: Calling 'track_source AGES3193_p2_035 095203.1 230202.1 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-28 19:37:17 START begin_task: Starting task 'sending tracking commands' 2008-Apr-28 19:37:17 LOG5 begin_task: Level: (3) ID = <10179> Status = 0 0 0 0 ok 2008-Apr-28 19:37:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_035} INFO {Slewing to source 'AGES3193_p2_035' ...} 2008-Apr-28 19:37:17 INFO1 track_source: Starting to track AGES3193_p2_035 2008-Apr-28 19:37:17 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_035" 2008-Apr-28 19:37:17 LOG3 vw_send: To DATATAKING: set ra 095203.1 2008-Apr-28 19:37:17 LOG3 vw_send: To DATATAKING: set dec 230202.1 2008-Apr-28 19:37:17 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-28 19:37:17 LOG3 vw_send: To DATATAKING: pnt tr 095203.1 230202.1 -CJ 2008-Apr-28 19:37:17 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-28 19:37:17 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-28 19:37:17 LOG5 finish_task: Level: (3) ID = <10179> Status = 0 0 0 0 ok 2008-Apr-28 19:37:17 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-28 19:37:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 19:37:17 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-28 19:37:17 LOG5 end_task: Level: (3) ID = <10179> Status = 0 0 0 0 ok 2008-Apr-28 19:37:17 START begin_task: Starting task 'waiting on telescope' 2008-Apr-28 19:37:17 LOG5 begin_task: Level: (3) ID = <10180> Status = 0 0 0 0 ok 2008-Apr-28 19:37:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-28 19:37:17 LOG3 waittrk: Start waittrk 5 2008-Apr-28 19:37:17 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-28 19:37:17 LOG5 begin_task: Level: (4) ID = <10181> Status = 0 0 0 0 ok 2008-Apr-28 19:37:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631113458.0} 2008-Apr-28 19:37:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 19:37:17 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-28 19:37:17 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_035" 2008-Apr-28 19:37:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 19:37:17 LOG4 got_cormsg: From DATATAKING: set ra 095203.1 2008-Apr-28 19:37:17 LOG4 got_cormsg: From DATATAKING: set dec 230202.1 2008-Apr-28 19:37:17 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-28 19:37:17 LOG4 got_cormsg: From DATATAKING: pnt tr 095203.1 230202.1 -CJ 2008-Apr-28 19:37:17 LOG4 got_cormsg: From DATATAKING: 095203.1 2008-Apr-28 19:37:17 LOG4 got_cormsg: From DATATAKING: vw% 230202.1 2008-Apr-28 19:37:17 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2008-Apr-28 19:37:17 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-28 19:37:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 19:37:22 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-28 19:37:22 LOG5 end_task: Level: (4) ID = <10181> Status = 0 0 0 0 ok 2008-Apr-28 19:37:22 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-28 19:37:22 LOG5 begin_task: Level: (4) ID = <10182> Status = 0 0 0 0 ok 2008-Apr-28 19:37:24 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-28 19:37:24 LOG5 end_task: Level: (4) ID = <10182> Status = 0 0 0 0 ok 2008-Apr-28 19:37:24 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-28 19:37:24 INFO2 waittrk: Now tracking AGES3193_p2_035 2008-Apr-28 19:37:24 LOG4 waittrk: Current telescope position: Az = 212.09 ZA = 5.56 2008-Apr-28 19:37:24 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-28 19:37:24 LOG5 finish_task: Level: (3) ID = <10180> Status = 0 0 0 0 ok 2008-Apr-28 19:37:24 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-28 19:37:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 19:37:24 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-28 19:37:24 LOG5 end_task: Level: (3) ID = <10180> Status = 0 0 0 0 ok 2008-Apr-28 19:37:24 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-28 19:37:24 LOG5 begin_task: Level: (3) ID = <10183> Status = 0 0 0 0 ok 2008-Apr-28 19:37:24 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-28 19:37:24 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-28 19:37:24 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-28 19:37:24 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-28 19:37:24 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 19:37:24 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-28 19:37:24 LOG5 begin_task: Level: (4) ID = <10184> Status = 0 0 0 0 ok 2008-Apr-28 19:37:24 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-28 19:37:24 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 19:37:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 19:37:25 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-28 19:37:25 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-28 19:37:25 LOG5 end_task: Level: (4) ID = <10184> Status = 0 0 0 0 ok 2008-Apr-28 19:37:25 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-28 19:37:25 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-28 19:37:25 LOG5 begin_task: Level: (4) ID = <10185> Status = 0 0 0 0 ok 2008-Apr-28 19:37:25 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-28 19:37:25 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-28 19:37:25 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-28 19:37:25 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-28 19:37:25 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-28 19:37:25 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-28 19:37:25 LOG5 begin_task: Level: (5) ID = <10186> Status = 0 0 0 0 ok 2008-Apr-28 19:37:25 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-28 19:37:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 19:37:25 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 1 dB --- beam 1: 7 6 dB 2008-Apr-28 19:37:25 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-28 19:37:25 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 5 dB 2008-Apr-28 19:37:25 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 2 2 dB 2008-Apr-28 19:37:25 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-28 19:37:25 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-28 19:37:25 LOG5 end_task: Level: (5) ID = <10186> Status = 0 0 0 0 ok 2008-Apr-28 19:37:25 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.085 0.942 ALFA beam 1: 1.068 1.006 2008-Apr-28 19:37:25 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.985 0.902 ALFA beam 3: 0.956 1.024 2008-Apr-28 19:37:25 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.897 0.938 ALFA beam 5: 0.994 1.117 2008-Apr-28 19:37:25 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.984 0.988 ALFA beam 7: 1.073 1.095 2008-Apr-28 19:37:25 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-28 19:37:25 LOG5 finish_task: Level: (4) ID = <10185> Status = 0 0 0 0 ok 2008-Apr-28 19:37:25 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-28 19:37:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 19:37:25 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-28 19:37:25 LOG5 end_task: Level: (4) ID = <10185> Status = 0 0 0 0 ok 2008-Apr-28 19:37:25 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-28 19:37:25 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-28 19:37:25 LOG5 finish_task: Level: (3) ID = <10183> Status = 0 0 0 0 ok 2008-Apr-28 19:37:25 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-28 19:37:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 19:37:25 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-28 19:37:25 LOG5 end_task: Level: (3) ID = <10183> Status = 0 0 0 0 ok 2008-Apr-28 19:37:25 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Steve Schnei 2008-Apr-28 19:37:25 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Steve Schnei 2008-Apr-28 19:37:25 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Steve Schnei 2008-Apr-28 19:37:26 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Steve Schnei 2008-Apr-28 19:37:26 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-28 19:37:26 START begin_task: Starting task 'WAPP calibration' 2008-Apr-28 19:37:26 LOG5 begin_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2008-Apr-28 19:37:26 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-28 19:37:26 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-28 19:37:26 START begin_task: Starting task 'selecting calibration type' 2008-Apr-28 19:37:26 LOG5 begin_task: Level: (4) ID = <10188> Status = 0 0 0 0 ok 2008-Apr-28 19:37:26 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-28 19:37:26 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-28 19:37:26 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 19:37:26 START begin_task: Starting task 'waiting on setcal' 2008-Apr-28 19:37:26 LOG5 begin_task: Level: (5) ID = <10189> Status = 0 0 0 0 ok 2008-Apr-28 19:37:26 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Steve Schnei' 2008-Apr-28 19:37:26 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-28 19:37:26 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 19:37:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 19:37:26 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-28 19:37:26 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-28 19:37:26 LOG5 end_task: Level: (5) ID = <10189> Status = 0 0 0 0 ok 2008-Apr-28 19:37:26 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-28 19:37:26 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-28 19:37:26 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-28 19:37:26 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-28 19:37:26 LOG5 begin_task: Level: (5) ID = <10190> Status = 0 0 0 0 ok 2008-Apr-28 19:37:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 19:37:26 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-28 19:37:26 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-28 19:37:26 LOG5 end_task: Level: (5) ID = <10190> Status = 0 0 0 0 ok 2008-Apr-28 19:37:26 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-28 19:37:26 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-28 19:37:26 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-28 19:37:26 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-28 19:37:26 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-28 19:37:26 LOG5 begin_task: Level: (5) ID = <10191> Status = 0 0 0 0 ok 2008-Apr-28 19:37:26 NOTE WAPPDATA-new_file: New FITS file: wapp.20080428.a2048.0003.fits 2008-Apr-28 19:37:26 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-28 19:37:26 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-28 19:37:26 LOG5 end_task: Level: (5) ID = <10191> Status = 0 0 0 0 ok 2008-Apr-28 19:37:26 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-28 19:37:26 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-28 19:37:26 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-28 19:37:26 LOG5 finish_task: Level: (4) ID = <10188> Status = 0 0 0 0 ok 2008-Apr-28 19:37:26 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-28 19:37:26 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 19:37:26 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-28 19:37:26 LOG5 end_task: Level: (4) ID = <10188> Status = 0 0 0 0 ok 2008-Apr-28 19:37:26 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-28 19:37:26 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-28 19:37:26 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-28 19:37:26 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-28 19:37:26 LOG5 begin_task: Level: (4) ID = <10192> Status = 0 0 0 0 ok 2008-Apr-28 19:37:26 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080428.a2048.0003.fits} 2008-Apr-28 19:37:26 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-28 19:37:26 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-28 19:37:26 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-28 19:37:26 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-28 19:37:26 LOG5 end_task: Level: (4) ID = <10192> Status = 0 0 0 0 ok 2008-Apr-28 19:37:26 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-28 19:37:26 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-28 19:37:26 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-28 19:37:26 LOG5 begin_task: Level: (4) ID = <10193> Status = 0 0 0 0 ok 2008-Apr-28 19:37:26 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-28 19:37:26 LOG5 log_alfabeam: Parameters: 9.867527777777779 23.03391666666667 9.660652 2008.3280428803205 -10.700039 2008-Apr-28 19:37:26 LOG4 log_alfabeam: ALFABEAM 0 9.867527777777779 23.033916666666659 2008-Apr-28 19:37:26 LOG4 log_alfabeam: ALFABEAM 1 9.867823470075187 22.933796378700102 2008-Apr-28 19:37:26 LOG4 log_alfabeam: ALFABEAM 2 9.873731615646006 22.999975276498162 2008-Apr-28 19:37:26 LOG4 log_alfabeam: ALFABEAM 3 9.873414860306601 23.100726248913777 2008-Apr-28 19:37:26 LOG4 log_alfabeam: ALFABEAM 4 9.867101040464350 23.134463236395543 2008-Apr-28 19:37:26 LOG4 log_alfabeam: ALFABEAM 5 9.861301391130532 23.066237739223023 2008-Apr-28 19:37:26 LOG4 log_alfabeam: ALFABEAM 6 9.861706125445435 22.966315804951222 2008-Apr-28 19:37:26 INFO2 take_spectra: Starting WAPP scan: 811900095 2008-Apr-28 19:37:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-28 19:37:27 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-28 19:37:27 LOG5 begin_task: Level: (5) ID = <10194> Status = 0 0 0 0 ok 2008-Apr-28 19:37:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-28 19:37:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85048.00 2008-Apr-28 19:37:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.113458 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-28 19:37:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.113458 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 19:37:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.113458 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 19:37:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.113458 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 19:37:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.113458 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 19:37:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.548 > 1.4)! 2008-Apr-28 19:37:33 LOG4 check_wapp_levels: WAPP-1 power levels: 1.531 1.212 1.463 1.383 2008-Apr-28 19:37:33 LOG4 check_wapp_levels: WAPP-2 power levels: 1.356 1.261 1.336 1.413 2008-Apr-28 19:37:33 LOG4 check_wapp_levels: WAPP-3 power levels: 1.265 1.319 1.399 1.516 2008-Apr-28 19:37:33 LOG4 check_wapp_levels: WAPP-4 power levels: 1.390 1.396 1.516 1.548 2008-Apr-28 19:37:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.113458 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-28 19:37:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.113458 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-28 19:37:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.113458 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-28 19:37:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.113458 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-28 19:37:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-28 19:37:33 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-28 19:37:33 LOG5 end_task: Level: (5) ID = <10194> Status = 0 0 0 0 ok 2008-Apr-28 19:37:33 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-28 19:37:33 LOG5 end_task: Level: (4) ID = <10193> Status = 0 0 0 0 ok 2008-Apr-28 19:37:33 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-28 19:37:33 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-28 19:37:33 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-28 19:37:33 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-28 19:37:33 LOG5 begin_task: Level: (4) ID = <10195> Status = 0 0 0 0 ok 2008-Apr-28 19:37:33 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-28 19:37:33 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-28 19:37:33 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-28 19:37:33 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-28 19:37:33 LOG5 end_task: Level: (4) ID = <10195> Status = 0 0 0 0 ok 2008-Apr-28 19:37:33 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-28 19:37:33 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-28 19:37:33 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-28 19:37:33 LOG5 begin_task: Level: (4) ID = <10196> Status = 0 0 0 0 ok 2008-Apr-28 19:37:33 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-28 19:37:33 LOG5 log_alfabeam: Parameters: 9.867527777777779 23.03391666666667 9.662602 2008.3280431021369 -10.700039 2008-Apr-28 19:37:33 LOG4 log_alfabeam: ALFABEAM 0 9.867527777777775 23.033916666666663 2008-Apr-28 19:37:33 LOG4 log_alfabeam: ALFABEAM 1 9.867854114857069 22.933815234472299 2008-Apr-28 19:37:33 LOG4 log_alfabeam: ALFABEAM 2 9.873741994752262 23.000337678504035 2008-Apr-28 19:37:33 LOG4 log_alfabeam: ALFABEAM 3 9.873394301373041 23.101070256214907 2008-Apr-28 19:37:33 LOG4 log_alfabeam: ALFABEAM 4 9.867069865951631 23.134437815618867 2008-Apr-28 19:37:33 LOG4 log_alfabeam: ALFABEAM 5 9.861291471863494 23.065869787293462 2008-Apr-28 19:37:33 LOG4 log_alfabeam: ALFABEAM 6 9.861727083623657 22.965973644624039 2008-Apr-28 19:37:33 INFO2 take_spectra: Starting WAPP scan: 811900096 2008-Apr-28 19:37:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-28 19:37:34 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-28 19:37:34 LOG5 begin_task: Level: (5) ID = <10197> Status = 0 0 0 0 ok 2008-Apr-28 19:37:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-28 19:37:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85055.00 2008-Apr-28 19:37:39 INFO5 check_wapp_levels: WAPP power levels are between 1.212 and 1.548 (still bad) 2008-Apr-28 19:37:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.113458 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-28 19:37:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.113458 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 19:37:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.113458 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 19:37:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.113458 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 19:37:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.113458 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 19:37:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.113458 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-28 19:37:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.113458 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-28 19:37:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.113458 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-28 19:37:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.113458 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-28 19:37:40 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-28 19:37:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-28 19:37:40 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-28 19:37:40 LOG5 end_task: Level: (5) ID = <10197> Status = 0 0 0 0 ok 2008-Apr-28 19:37:40 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-28 19:37:40 LOG5 end_task: Level: (4) ID = <10196> Status = 0 0 0 0 ok 2008-Apr-28 19:37:40 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-28 19:37:40 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-28 19:37:40 LOG5 finish_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2008-Apr-28 19:37:40 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-28 19:37:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 19:37:40 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-28 19:37:40 LOG5 end_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2008-Apr-28 19:37:40 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-28 19:37:40 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 212.67 and ZA = 5.55 2008-Apr-28 19:37:40 LOG3 track_source: Calling 'track_source AGES3193_p2_035 212.67 5.5473048048 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-28 19:37:40 START begin_task: Starting task 'sending tracking commands' 2008-Apr-28 19:37:40 LOG5 begin_task: Level: (3) ID = <10198> Status = 0 0 0 0 ok 2008-Apr-28 19:37:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_035} INFO {Slewing to source 'AGES3193_p2_035' ...} 2008-Apr-28 19:37:40 INFO1 track_source: Starting to track AGES3193_p2_035 2008-Apr-28 19:37:40 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_035" 2008-Apr-28 19:37:40 LOG3 vw_send: To DATATAKING: set ra 212.67 2008-Apr-28 19:37:40 LOG3 vw_send: To DATATAKING: set dec 5.5473048048 2008-Apr-28 19:37:40 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-28 19:37:40 LOG3 vw_send: To DATATAKING: pnt tr 212.67 5.5473048048 -CF 2008-Apr-28 19:37:40 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-28 19:37:40 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-28 19:37:40 LOG5 finish_task: Level: (3) ID = <10198> Status = 0 0 0 0 ok 2008-Apr-28 19:37:40 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-28 19:37:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 19:37:41 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-28 19:37:41 LOG5 end_task: Level: (3) ID = <10198> Status = 0 0 0 0 ok 2008-Apr-28 19:37:41 LOG1 fixed_driftmap: Parameters: HA = -00:12:59.9 Start = 09:40:29.4 LST = 09:39:52.4 diff = 37.0 secs 2008-Apr-28 19:37:41 INFO2 fixed_driftmap: Waiting 35 seconds for RA 9:53:29 2008-Apr-28 19:37:41 INFO2 lstwait: Waiting for 34.9 secs from LST 09:39:52 to LST 09:40:27 ... 2008-Apr-28 19:37:41 LOG4 send_obs_status: To obs_status: <1> TASKTIME 34.890287217603266 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-28 19:37:41 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-28 19:37:41 LOG5 begin_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2008-Apr-28 19:37:41 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_035" 2008-Apr-28 19:37:41 LOG4 got_cormsg: From DATATAKING: set ra 212.67 2008-Apr-28 19:37:41 LOG4 got_cormsg: From DATATAKING: set dec 5.5473048048 2008-Apr-28 19:37:41 LOG4 got_cormsg: From DATATAKING: vw% 212.67 2008-Apr-28 19:37:41 LOG4 got_cormsg: From DATATAKING: vw% 5.5473048048 2008-Apr-28 19:37:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 19:37:41 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-28 19:37:41 LOG4 got_cormsg: From DATATAKING: pnt tr 212.67 5.5473048048 -CF 2008-Apr-28 19:37:41 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-28 19:37:41 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2008-Apr-28 19:37:45 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.898 and 1.120 2008-Apr-28 19:38:16 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-28 19:38:16 LOG5 end_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2008-Apr-28 19:38:16 LOG4 lstwait: Finished waiting, the gui caused difference: 0.11058751999897254 2008-Apr-28 19:38:16 INFO3 lstwait: Finished waiting 2008-Apr-28 19:38:16 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-28 19:38:16 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-28 19:38:16 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-28 19:38:16 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-28 19:38:16 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-28 19:38:16 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-28 19:38:16 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-28 19:38:16 LOG5 begin_task: Level: (3) ID = <10200> Status = 0 0 0 0 ok 2008-Apr-28 19:38:16 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-28 19:38:16 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-28 19:38:16 INFO2 take_spectra: Starting WAPP scan: 811900097 2008-Apr-28 19:38:16 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-28 19:38:16 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-28 19:38:16 LOG5 begin_task: Level: (4) ID = <10201> Status = 0 0 0 0 ok 2008-Apr-28 19:38:16 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-28 19:38:16 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85097.00 2008-Apr-28 19:38:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.113458 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-28 19:38:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.113458 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 19:38:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.113458 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 19:38:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.113458 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 19:38:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.113458 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 19:38:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.113458 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-28 19:38:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.113458 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-28 19:38:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.113458 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-28 19:38:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.113458 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-28 19:58:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-28 19:58:17 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-28 19:58:17 LOG5 end_task: Level: (4) ID = <10201> Status = 0 0 0 0 ok 2008-Apr-28 19:58:17 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-28 19:58:17 LOG5 end_task: Level: (3) ID = <10200> Status = 0 0 0 0 ok 2008-Apr-28 19:58:17 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-28 19:58:17 LOG5 finish_task: Level: (2) ID = <10167> Status = 0 0 0 0 ok 2008-Apr-28 19:58:17 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-28 19:58:17 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-28 19:58:17 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-28 19:58:18 LOG5 end_task: Level: (2) ID = <10167> Status = 0 0 0 0 ok 2008-Apr-28 19:58:18 COMMAND run_command_line: EXECUTING command 19: 'FIXEDDRIFT az=147.04 alfaangle=49.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_037 ra=95300.00 dec=225900.00' 2008-Apr-28 19:58:18 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-28 19:58:18 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-28 19:58:18 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 147.04 49.3 hcorcal 5 tracking no first 1 AGES3193_p2_037 95300.00 225900.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-28 19:58:18 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-28 19:58:18 LOG5 begin_task: Level: (2) ID = <10202> Status = 0 0 0 0 ok 2008-Apr-28 19:58:18 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES3193_p2_035' 2008-Apr-28 19:58:18 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-28 19:58:18 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p2_037} 2008-Apr-28 19:58:18 INFO3 fixed_driftmap: Sending telescope to Az = 147.04 and ZA = 5.51 2008-Apr-28 19:58:18 LOG3 track_source: Calling 'track_source AGES3193_p2_037 147.04 5.5058271018 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-28 19:58:18 START begin_task: Starting task 'sending tracking commands' 2008-Apr-28 19:58:18 LOG5 begin_task: Level: (3) ID = <10203> Status = 0 0 0 0 ok 2008-Apr-28 19:58:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_037} INFO {Slewing to source 'AGES3193_p2_037' ...} 2008-Apr-28 19:58:18 INFO1 track_source: Starting to track AGES3193_p2_037 2008-Apr-28 19:58:18 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_037" 2008-Apr-28 19:58:18 LOG3 vw_send: To DATATAKING: set ra 147.04 2008-Apr-28 19:58:18 LOG3 vw_send: To DATATAKING: set dec 5.5058271018 2008-Apr-28 19:58:18 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-28 19:58:18 LOG3 vw_send: To DATATAKING: pnt tr 147.04 5.5058271018 -CF 2008-Apr-28 19:58:18 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-28 19:58:18 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-28 19:58:18 LOG5 finish_task: Level: (3) ID = <10203> Status = 0 0 0 0 ok 2008-Apr-28 19:58:18 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-28 19:58:18 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 19:58:18 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-28 19:58:18 LOG5 end_task: Level: (3) ID = <10203> Status = 0 0 0 0 ok 2008-Apr-28 19:58:18 START begin_task: Starting task 'rotate ALFA to +49.3 degrees' 2008-Apr-28 19:58:18 LOG5 begin_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2008-Apr-28 19:58:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +49.3 degrees ...} 2008-Apr-28 19:58:18 INFO2 rotate_alfa: ALFA commanded to +49.3 degrees 2008-Apr-28 19:58:18 LOG3 sock_errsend: To ALFAMOTOR: POSITION 49.3 REPLY 2008-Apr-28 19:58:18 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-28 19:58:18 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-28 19:58:18 LOG5 begin_task: Level: (4) ID = <10205> Status = 0 0 0 0 ok 2008-Apr-28 19:58:19 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_037" 2008-Apr-28 19:58:19 LOG4 got_cormsg: From DATATAKING: set ra 147.04 2008-Apr-28 19:58:19 LOG4 got_cormsg: From DATATAKING: set dec 5.5058271018 2008-Apr-28 19:58:19 LOG4 got_cormsg: From DATATAKING: vw% 147.04 2008-Apr-28 19:58:19 LOG4 got_cormsg: From DATATAKING: vw% 5.5058271018 2008-Apr-28 19:58:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 19:58:19 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-28 19:58:19 LOG4 got_cormsg: From DATATAKING: pnt tr 147.04 5.5058271018 -CF 2008-Apr-28 19:58:19 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-28 19:58:19 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-28 19:58:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 19:58:53 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-28 19:58:53 INFO3 alfa_motor: ALFA rotator in-position +49.30 degrees 2008-Apr-28 19:58:53 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-28 19:58:53 LOG5 end_task: Level: (4) ID = <10205> Status = 0 0 0 0 ok 2008-Apr-28 19:58:53 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-28 19:58:53 STOP finish_task: Finishing task 'rotate ALFA to +49.3 degrees' 2008-Apr-28 19:58:53 LOG5 finish_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2008-Apr-28 19:58:53 INFO2 finish_task: DONE finished configuration: rotating ALFA to +49.3 degrees 2008-Apr-28 19:58:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 19:58:53 STOP end_task: Finishing task 'rotate ALFA to +49.3 degrees' with status 'OK' 2008-Apr-28 19:58:53 LOG5 end_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2008-Apr-28 19:58:53 START begin_task: Starting task 'waiting on telescope' 2008-Apr-28 19:58:53 LOG5 begin_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2008-Apr-28 19:58:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-28 19:58:53 LOG3 waittrk: Start waittrk 5 2008-Apr-28 19:58:53 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-28 19:58:53 LOG5 begin_task: Level: (4) ID = <10207> Status = 0 0 0 0 ok 2008-Apr-28 19:58:58 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-28 19:58:58 LOG5 end_task: Level: (4) ID = <10207> Status = 0 0 0 0 ok 2008-Apr-28 19:58:58 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-28 19:58:58 LOG5 begin_task: Level: (4) ID = <10208> Status = 0 0 0 0 ok 2008-Apr-28 20:01:07 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-28 20:01:07 LOG5 end_task: Level: (4) ID = <10208> Status = 0 0 0 0 ok 2008-Apr-28 20:01:07 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-28 20:01:07 INFO2 waittrk: Now tracking AGES3193_p2_037 2008-Apr-28 20:01:07 LOG4 waittrk: Current telescope position: Az = 146.83 ZA = 5.52 2008-Apr-28 20:01:07 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-28 20:01:07 LOG5 finish_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2008-Apr-28 20:01:07 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-28 20:01:07 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 20:01:07 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-28 20:01:07 LOG5 end_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2008-Apr-28 20:01:07 START begin_task: Starting task 'selecting calibration type' 2008-Apr-28 20:01:07 LOG5 begin_task: Level: (3) ID = <10209> Status = 0 0 0 0 ok 2008-Apr-28 20:01:07 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-28 20:01:07 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-28 20:01:07 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 20:01:07 START begin_task: Starting task 'waiting on setcal' 2008-Apr-28 20:01:07 LOG5 begin_task: Level: (4) ID = <10210> Status = 0 0 0 0 ok 2008-Apr-28 20:01:07 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-28 20:01:07 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 20:01:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 20:01:08 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-28 20:01:08 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-28 20:01:08 LOG5 end_task: Level: (4) ID = <10210> Status = 0 0 0 0 ok 2008-Apr-28 20:01:08 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-28 20:01:08 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-28 20:01:08 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-28 20:01:08 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-28 20:01:08 LOG5 begin_task: Level: (4) ID = <10211> Status = 0 0 0 0 ok 2008-Apr-28 20:01:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 20:01:09 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-28 20:01:09 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-28 20:01:09 LOG5 end_task: Level: (4) ID = <10211> Status = 0 0 0 0 ok 2008-Apr-28 20:01:09 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-28 20:01:09 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-28 20:01:09 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-28 20:01:09 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-28 20:01:09 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-28 20:01:09 LOG5 begin_task: Level: (4) ID = <10212> Status = 0 0 0 0 ok 2008-Apr-28 20:01:09 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-28 20:01:09 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-28 20:01:09 LOG5 end_task: Level: (4) ID = <10212> Status = 0 0 0 0 ok 2008-Apr-28 20:01:09 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-28 20:01:09 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-28 20:01:09 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-28 20:01:09 LOG5 finish_task: Level: (3) ID = <10209> Status = 0 0 0 0 ok 2008-Apr-28 20:01:09 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-28 20:01:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 20:01:09 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-28 20:01:09 LOG5 end_task: Level: (3) ID = <10209> Status = 0 0 0 0 ok 2008-Apr-28 20:01:09 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2008-Apr-28 20:01:09 INFO2 astwait: Waiting for 123 seconds from 00:01:09 to 00:03:12 UTC ... 2008-Apr-28 20:01:09 LOG4 send_obs_status: To obs_status: <1> TASKTIME 123 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-28 20:01:09 START begin_task: Starting task 'waiting on waiting for AST time' 2008-Apr-28 20:01:09 LOG5 begin_task: Level: (3) ID = <10213> Status = 0 0 0 0 ok 2008-Apr-28 20:02:08 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 20:02:08.297 (seconds: 72128.297)!} 2008-Apr-28 20:02:08 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 20:02:08.297 (seconds: 72128.297)! 2008-Apr-28 20:03:12 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2008-Apr-28 20:03:12 LOG5 end_task: Level: (3) ID = <10213> Status = 0 0 0 0 ok 2008-Apr-28 20:03:12 INFO3 astwait: Finished waiting 2008-Apr-28 20:03:12 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-28 20:03:12 LOG5 dopset_later: Calling 'dopset_later 61.408659336405186' 2008-Apr-28 20:03:12 INFO3 dopset_later: Setting Doppler correction for 20:04:12 (61.4 seconds from now) 2008-Apr-28 20:03:12 LOG5 antvel: Calling 'antvel 147.040000 5.505827 F 61.408659336405186' 2008-Apr-28 20:03:12 LOG2 antvel: Parameters to Doppler: Heliocentric 86652 2008 119 0.0 2008-Apr-28 20:03:12 INFO5 antvel: Computed antenna velocity: +28.26200 km/s 2008-Apr-28 20:03:12 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=28.262002093100001 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-28 20:03:12 INFO4 dopset_gen: New sky frequencies: 1381.113228 1381.113228 1381.113228 1381.113228 1381.113228 1381.113228 1381.113228 1381.113228 1381.113228 2008-Apr-28 20:03:12 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.113228 sky0=1381.113228 sky1=1381.113228 sky2=1381.113228 sky3=1381.113228 sky4=1381.113228 sky5=1381.113228 sky6=1381.113228 sky7=1381.113228 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-28 20:03:12 LOG2 dopset_gen: Result from 'sky2syn': 1631.113228 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-28 20:03:12 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631113228.0} 2008-Apr-28 20:03:12 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 20:03:12 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-28 20:03:12 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-28 20:03:12 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:02.6 Dec = +22:59:02.1 2008-Apr-28 20:03:12 LOG3 track_source: Calling 'track_source AGES3193_p2_037 095202.6 225902.1 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-28 20:03:12 START begin_task: Starting task 'sending tracking commands' 2008-Apr-28 20:03:12 LOG5 begin_task: Level: (3) ID = <10214> Status = 0 0 0 0 ok 2008-Apr-28 20:03:12 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_037} INFO {Slewing to source 'AGES3193_p2_037' ...} 2008-Apr-28 20:03:12 INFO1 track_source: Starting to track AGES3193_p2_037 2008-Apr-28 20:03:12 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_037" 2008-Apr-28 20:03:12 LOG3 vw_send: To DATATAKING: set ra 095202.6 2008-Apr-28 20:03:12 LOG3 vw_send: To DATATAKING: set dec 225902.1 2008-Apr-28 20:03:12 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-28 20:03:12 LOG3 vw_send: To DATATAKING: pnt tr 095202.6 225902.1 -CJ 2008-Apr-28 20:03:12 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-28 20:03:12 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-28 20:03:12 LOG5 finish_task: Level: (3) ID = <10214> Status = 0 0 0 0 ok 2008-Apr-28 20:03:12 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-28 20:03:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 20:03:12 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-28 20:03:12 LOG5 end_task: Level: (3) ID = <10214> Status = 0 0 0 0 ok 2008-Apr-28 20:03:12 START begin_task: Starting task 'waiting on telescope' 2008-Apr-28 20:03:12 LOG5 begin_task: Level: (3) ID = <10215> Status = 0 0 0 0 ok 2008-Apr-28 20:03:12 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-28 20:03:12 LOG3 waittrk: Start waittrk 5 2008-Apr-28 20:03:12 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-28 20:03:12 LOG5 begin_task: Level: (4) ID = <10216> Status = 0 0 0 0 ok 2008-Apr-28 20:03:12 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631113228.0} 2008-Apr-28 20:03:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 20:03:12 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_037" 2008-Apr-28 20:03:12 LOG4 got_cormsg: From DATATAKING: set ra 095202.6 2008-Apr-28 20:03:12 LOG4 got_cormsg: From DATATAKING: set dec 225902.1 2008-Apr-28 20:03:12 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 095202.6 2008-Apr-28 20:03:12 LOG4 got_cormsg: From DATATAKING: vw% 225902.1 2008-Apr-28 20:03:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 20:03:12 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-28 20:03:12 LOG4 got_cormsg: From DATATAKING: pnt tr 095202.6 225902.1 -CJ 2008-Apr-28 20:03:12 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-28 20:03:12 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-28 20:03:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 20:03:17 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-28 20:03:17 LOG5 end_task: Level: (4) ID = <10216> Status = 0 0 0 0 ok 2008-Apr-28 20:03:17 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-28 20:03:17 LOG5 begin_task: Level: (4) ID = <10217> Status = 0 0 0 0 ok 2008-Apr-28 20:03:19 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-28 20:03:19 LOG5 end_task: Level: (4) ID = <10217> Status = 0 0 0 0 ok 2008-Apr-28 20:03:19 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-28 20:03:19 INFO2 waittrk: Now tracking AGES3193_p2_037 2008-Apr-28 20:03:19 LOG4 waittrk: Current telescope position: Az = 146.69 ZA = 5.53 2008-Apr-28 20:03:19 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-28 20:03:19 LOG5 finish_task: Level: (3) ID = <10215> Status = 0 0 0 0 ok 2008-Apr-28 20:03:19 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-28 20:03:19 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 20:03:19 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-28 20:03:19 LOG5 end_task: Level: (3) ID = <10215> Status = 0 0 0 0 ok 2008-Apr-28 20:03:19 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-28 20:03:19 LOG5 begin_task: Level: (3) ID = <10218> Status = 0 0 0 0 ok 2008-Apr-28 20:03:19 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-28 20:03:19 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-28 20:03:19 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-28 20:03:19 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-28 20:03:19 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 20:03:19 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-28 20:03:19 LOG5 begin_task: Level: (4) ID = <10219> Status = 0 0 0 0 ok 2008-Apr-28 20:03:20 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-28 20:03:20 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 20:03:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 20:03:20 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-28 20:03:20 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-28 20:03:20 LOG5 end_task: Level: (4) ID = <10219> Status = 0 0 0 0 ok 2008-Apr-28 20:03:20 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-28 20:03:20 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-28 20:03:20 LOG5 begin_task: Level: (4) ID = <10220> Status = 0 0 0 0 ok 2008-Apr-28 20:03:20 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-28 20:03:20 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-28 20:03:20 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-28 20:03:20 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-28 20:03:20 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-28 20:03:20 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-28 20:03:20 LOG5 begin_task: Level: (5) ID = <10221> Status = 0 0 0 0 ok 2008-Apr-28 20:03:20 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-28 20:03:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 20:03:20 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 1 dB --- beam 1: 7 6 dB 2008-Apr-28 20:03:20 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-28 20:03:20 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 6 dB 2008-Apr-28 20:03:20 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 2 3 dB 2008-Apr-28 20:03:20 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-28 20:03:20 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-28 20:03:20 LOG5 end_task: Level: (5) ID = <10221> Status = 0 0 0 0 ok 2008-Apr-28 20:03:20 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.099 0.966 ALFA beam 1: 1.063 1.031 2008-Apr-28 20:03:20 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.003 0.915 ALFA beam 3: 0.976 1.025 2008-Apr-28 20:03:20 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.914 0.954 ALFA beam 5: 0.986 0.893 2008-Apr-28 20:03:20 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.953 1.012 ALFA beam 7: 1.039 0.901 2008-Apr-28 20:03:20 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-28 20:03:20 LOG5 finish_task: Level: (4) ID = <10220> Status = 0 0 0 0 ok 2008-Apr-28 20:03:20 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-28 20:03:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 20:03:20 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-28 20:03:20 LOG5 end_task: Level: (4) ID = <10220> Status = 0 0 0 0 ok 2008-Apr-28 20:03:20 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-28 20:03:20 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-28 20:03:20 LOG5 finish_task: Level: (3) ID = <10218> Status = 0 0 0 0 ok 2008-Apr-28 20:03:20 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-28 20:03:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 20:03:21 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-28 20:03:21 LOG5 end_task: Level: (3) ID = <10218> Status = 0 0 0 0 ok 2008-Apr-28 20:03:21 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Steve Schnei 2008-Apr-28 20:03:21 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Steve Schnei 2008-Apr-28 20:03:21 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Steve Schnei 2008-Apr-28 20:03:21 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Steve Schnei 2008-Apr-28 20:03:21 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-28 20:03:21 START begin_task: Starting task 'WAPP calibration' 2008-Apr-28 20:03:21 LOG5 begin_task: Level: (3) ID = <10222> Status = 0 0 0 0 ok 2008-Apr-28 20:03:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-28 20:03:21 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-28 20:03:21 START begin_task: Starting task 'selecting calibration type' 2008-Apr-28 20:03:21 LOG5 begin_task: Level: (4) ID = <10223> Status = 0 0 0 0 ok 2008-Apr-28 20:03:21 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-28 20:03:21 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-28 20:03:21 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 20:03:21 START begin_task: Starting task 'waiting on setcal' 2008-Apr-28 20:03:21 LOG5 begin_task: Level: (5) ID = <10224> Status = 0 0 0 0 ok 2008-Apr-28 20:03:21 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Steve Schnei' 2008-Apr-28 20:03:21 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-28 20:03:21 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 20:03:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 20:03:21 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-28 20:03:21 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-28 20:03:21 LOG5 end_task: Level: (5) ID = <10224> Status = 0 0 0 0 ok 2008-Apr-28 20:03:21 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-28 20:03:21 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-28 20:03:21 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-28 20:03:21 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-28 20:03:21 LOG5 begin_task: Level: (5) ID = <10225> Status = 0 0 0 0 ok 2008-Apr-28 20:03:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 20:03:21 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-28 20:03:21 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-28 20:03:21 LOG5 end_task: Level: (5) ID = <10225> Status = 0 0 0 0 ok 2008-Apr-28 20:03:21 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-28 20:03:21 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-28 20:03:21 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-28 20:03:21 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-28 20:03:21 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-28 20:03:21 LOG5 begin_task: Level: (5) ID = <10226> Status = 0 0 0 0 ok 2008-Apr-28 20:03:21 NOTE WAPPDATA-new_file: New FITS file: wapp.20080428.a2048.0004.fits 2008-Apr-28 20:03:21 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-28 20:03:21 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-28 20:03:21 LOG5 end_task: Level: (5) ID = <10226> Status = 0 0 0 0 ok 2008-Apr-28 20:03:21 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-28 20:03:21 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-28 20:03:21 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-28 20:03:21 LOG5 finish_task: Level: (4) ID = <10223> Status = 0 0 0 0 ok 2008-Apr-28 20:03:21 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-28 20:03:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 20:03:21 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-28 20:03:21 LOG5 end_task: Level: (4) ID = <10223> Status = 0 0 0 0 ok 2008-Apr-28 20:03:21 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-28 20:03:21 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-28 20:03:21 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-28 20:03:21 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-28 20:03:21 LOG5 begin_task: Level: (4) ID = <10227> Status = 0 0 0 0 ok 2008-Apr-28 20:03:21 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080428.a2048.0004.fits} 2008-Apr-28 20:03:21 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-28 20:03:21 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-28 20:03:21 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-28 20:03:21 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-28 20:03:21 LOG5 end_task: Level: (4) ID = <10227> Status = 0 0 0 0 ok 2008-Apr-28 20:03:21 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-28 20:03:22 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-28 20:03:22 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-28 20:03:22 LOG5 begin_task: Level: (4) ID = <10228> Status = 0 0 0 0 ok 2008-Apr-28 20:03:22 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-28 20:03:22 LOG5 log_alfabeam: Parameters: 9.8673888888888914 22.983916666666669 10.093779 2008.3280921552969 49.299995 2008-Apr-28 20:03:22 LOG4 log_alfabeam: ALFABEAM 0 9.867388888888893 22.983916666666669 2008-Apr-28 20:03:22 LOG4 log_alfabeam: ALFABEAM 1 9.869733848549796 22.884007382284626 2008-Apr-28 20:03:22 LOG4 log_alfabeam: ALFABEAM 2 9.874216989453316 22.950039383124111 2008-Apr-28 20:03:22 LOG4 log_alfabeam: ALFABEAM 3 9.871998438564530 23.050534922902376 2008-Apr-28 20:03:22 LOG4 log_alfabeam: ALFABEAM 4 9.865112889022928 23.084302541672340 2008-Apr-28 20:03:22 LOG4 log_alfabeam: ALFABEAM 5 9.860479613757809 23.016215042214657 2008-Apr-28 20:03:22 LOG4 log_alfabeam: ALFABEAM 6 9.862881811971778 22.916429545480682 2008-Apr-28 20:03:22 INFO2 take_spectra: Starting WAPP scan: 811900098 2008-Apr-28 20:03:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-28 20:03:22 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-28 20:03:22 LOG5 begin_task: Level: (5) ID = <10229> Status = 0 0 0 0 ok 2008-Apr-28 20:03:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-28 20:03:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 203.00 2008-Apr-28 20:03:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.113228 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-28 20:03:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.113228 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 20:03:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.113228 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 20:03:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.113228 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 20:03:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.113228 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 20:03:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.113228 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-28 20:03:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.113228 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-28 20:03:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.113228 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-28 20:03:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.113228 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-28 20:03:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-28 20:03:28 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-28 20:03:28 LOG5 end_task: Level: (5) ID = <10229> Status = 0 0 0 0 ok 2008-Apr-28 20:03:28 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-28 20:03:28 LOG5 end_task: Level: (4) ID = <10228> Status = 0 0 0 0 ok 2008-Apr-28 20:03:28 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-28 20:03:28 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-28 20:03:28 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-28 20:03:28 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-28 20:03:28 LOG5 begin_task: Level: (4) ID = <10230> Status = 0 0 0 0 ok 2008-Apr-28 20:03:28 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-28 20:03:28 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-28 20:03:28 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-28 20:03:28 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-28 20:03:28 LOG5 end_task: Level: (4) ID = <10230> Status = 0 0 0 0 ok 2008-Apr-28 20:03:28 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-28 20:03:28 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-28 20:03:28 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-28 20:03:28 LOG5 begin_task: Level: (4) ID = <10231> Status = 0 0 0 0 ok 2008-Apr-28 20:03:28 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-28 20:03:28 LOG5 log_alfabeam: Parameters: 9.8673888888888914 22.983916666666669 10.095729 2008.3280923771135 49.299995 2008-Apr-28 20:03:28 LOG4 log_alfabeam: ALFABEAM 0 9.867388888888900 22.983916666666666 2008-Apr-28 20:03:28 LOG4 log_alfabeam: ALFABEAM 1 9.869764117244474 22.884143690476321 2008-Apr-28 20:03:28 LOG4 log_alfabeam: ALFABEAM 2 9.874227356832142 22.950438091961296 2008-Apr-28 20:03:28 LOG4 log_alfabeam: ALFABEAM 3 9.871977979745706 23.050803068985019 2008-Apr-28 20:03:28 LOG4 log_alfabeam: ALFABEAM 4 9.865082231686687 23.084168877673246 2008-Apr-28 20:03:28 LOG4 log_alfabeam: ALFABEAM 5 9.860469957411592 23.015815838722752 2008-Apr-28 20:03:28 LOG4 log_alfabeam: ALFABEAM 6 9.862902250820641 22.916169664956371 2008-Apr-28 20:03:28 INFO2 take_spectra: Starting WAPP scan: 811900099 2008-Apr-28 20:03:29 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-28 20:03:29 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-28 20:03:29 LOG5 begin_task: Level: (5) ID = <10232> Status = 0 0 0 0 ok 2008-Apr-28 20:03:29 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-28 20:03:29 INFO1 WAPP=1+2+3+4-start_spectra: start sec 210.00 2008-Apr-28 20:03:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.529 > 1.4)! 2008-Apr-28 20:03:34 LOG4 check_wapp_levels: WAPP-1 power levels: 1.529 1.238 1.459 1.411 2008-Apr-28 20:03:34 LOG4 check_wapp_levels: WAPP-2 power levels: 1.376 1.276 1.360 1.417 2008-Apr-28 20:03:34 LOG4 check_wapp_levels: WAPP-3 power levels: 1.286 1.337 1.395 1.205 2008-Apr-28 20:03:34 LOG4 check_wapp_levels: WAPP-4 power levels: 1.362 1.424 1.485 1.267 2008-Apr-28 20:03:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.113228 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-28 20:03:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.113228 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 20:03:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.113228 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 20:03:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.113228 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 20:03:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.113228 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 20:03:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.113228 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-28 20:03:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.113228 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-28 20:03:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.113228 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-28 20:03:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.113228 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-28 20:03:35 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-28 20:03:35 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-28 20:03:35 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-28 20:03:35 LOG5 end_task: Level: (5) ID = <10232> Status = 0 0 0 0 ok 2008-Apr-28 20:03:35 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-28 20:03:35 LOG5 end_task: Level: (4) ID = <10231> Status = 0 0 0 0 ok 2008-Apr-28 20:03:35 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-28 20:03:35 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-28 20:03:35 LOG5 finish_task: Level: (3) ID = <10222> Status = 0 0 0 0 ok 2008-Apr-28 20:03:35 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-28 20:03:35 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 20:03:35 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-28 20:03:35 LOG5 end_task: Level: (3) ID = <10222> Status = 0 0 0 0 ok 2008-Apr-28 20:03:35 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-28 20:03:35 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 147.04 and ZA = 5.51 2008-Apr-28 20:03:35 LOG3 track_source: Calling 'track_source AGES3193_p2_037 147.04 5.5058271018 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-28 20:03:35 START begin_task: Starting task 'sending tracking commands' 2008-Apr-28 20:03:35 LOG5 begin_task: Level: (3) ID = <10233> Status = 0 0 0 0 ok 2008-Apr-28 20:03:35 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_037} INFO {Slewing to source 'AGES3193_p2_037' ...} 2008-Apr-28 20:03:35 INFO1 track_source: Starting to track AGES3193_p2_037 2008-Apr-28 20:03:35 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_037" 2008-Apr-28 20:03:35 LOG3 vw_send: To DATATAKING: set ra 147.04 2008-Apr-28 20:03:35 LOG3 vw_send: To DATATAKING: set dec 5.5058271018 2008-Apr-28 20:03:35 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-28 20:03:35 LOG3 vw_send: To DATATAKING: pnt tr 147.04 5.5058271018 -CF 2008-Apr-28 20:03:35 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-28 20:03:35 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-28 20:03:35 LOG5 finish_task: Level: (3) ID = <10233> Status = 0 0 0 0 ok 2008-Apr-28 20:03:35 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-28 20:03:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 20:03:36 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-28 20:03:36 LOG5 end_task: Level: (3) ID = <10233> Status = 0 0 0 0 ok 2008-Apr-28 20:03:36 LOG1 fixed_driftmap: Parameters: HA = +00:12:59.9 Start = 10:06:29.2 LST = 10:05:51.6 diff = 37.5 secs 2008-Apr-28 20:03:36 INFO2 fixed_driftmap: Waiting 35.5 seconds for RA 9:53:29 2008-Apr-28 20:03:36 INFO2 lstwait: Waiting for 35.4 secs from LST 10:05:52 to LST 10:06:27 ... 2008-Apr-28 20:03:36 LOG4 send_obs_status: To obs_status: <1> TASKTIME 35.413829942807872 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-28 20:03:36 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-28 20:03:36 LOG5 begin_task: Level: (3) ID = <10234> Status = 0 0 0 0 ok 2008-Apr-28 20:03:36 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_037" 2008-Apr-28 20:03:36 LOG4 got_cormsg: From DATATAKING: set ra 147.04 2008-Apr-28 20:03:36 LOG4 got_cormsg: From DATATAKING: set dec 5.5058271018 2008-Apr-28 20:03:36 LOG4 got_cormsg: From DATATAKING: vw% 147.04 2008-Apr-28 20:03:36 LOG4 got_cormsg: From DATATAKING: vw% 5.5058271018 2008-Apr-28 20:03:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 20:03:36 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-28 20:03:36 LOG4 got_cormsg: From DATATAKING: pnt tr 147.04 5.5058271018 -CF 2008-Apr-28 20:03:36 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-28 20:03:36 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-28 20:03:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 20:03:40 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.892 and 1.099 2008-Apr-28 20:04:11 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-28 20:04:11 LOG5 end_task: Level: (3) ID = <10234> Status = 0 0 0 0 ok 2008-Apr-28 20:04:11 LOG4 lstwait: Finished waiting, the gui caused difference: 0.58641140000190717 2008-Apr-28 20:04:11 INFO3 lstwait: Finished waiting 2008-Apr-28 20:04:11 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-28 20:04:11 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-28 20:04:11 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-28 20:04:11 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-28 20:04:11 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-28 20:04:11 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-28 20:04:11 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-28 20:04:11 LOG5 begin_task: Level: (3) ID = <10235> Status = 0 0 0 0 ok 2008-Apr-28 20:04:11 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-28 20:04:11 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-28 20:04:11 INFO2 take_spectra: Starting WAPP scan: 811900100 2008-Apr-28 20:04:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-28 20:04:12 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-28 20:04:12 LOG5 begin_task: Level: (4) ID = <10236> Status = 0 0 0 0 ok 2008-Apr-28 20:04:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-28 20:04:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 253.00 2008-Apr-28 20:04:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.113228 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-28 20:04:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.113228 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 20:04:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.113228 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 20:04:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.113228 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 20:04:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.113228 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 20:04:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.113228 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-28 20:04:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.113228 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-28 20:04:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.113228 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-28 20:04:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.113228 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-28 20:17:07 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 20:17:07.298 (seconds: 73027.298)!} 2008-Apr-28 20:17:07 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 20:17:07.298 (seconds: 73027.298)! 2008-Apr-28 20:17:08 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 73026.0 to 73027.0! 2008-Apr-28 20:17:09 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (73026.0 - 73028.0)! 2008-Apr-28 20:24:13 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-28 20:24:13 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-28 20:24:13 LOG5 end_task: Level: (4) ID = <10236> Status = 0 0 0 0 ok 2008-Apr-28 20:24:13 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-28 20:24:13 LOG5 end_task: Level: (3) ID = <10235> Status = 0 0 0 0 ok 2008-Apr-28 20:24:13 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-28 20:24:13 LOG5 finish_task: Level: (2) ID = <10202> Status = 0 0 0 0 ok 2008-Apr-28 20:24:13 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-28 20:24:13 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-28 20:24:13 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-28 20:24:13 LOG5 end_task: Level: (2) ID = <10202> Status = 0 0 0 0 ok 2008-Apr-28 20:24:13 COMMAND run_command_line: EXECUTING command 23: 'FIXEDDRIFT az=119.86 alfaangle=78.7 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_039 ra=95300.00 dec=225600.00' 2008-Apr-28 20:24:13 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-28 20:24:14 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-28 20:24:14 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 119.86 78.7 hcorcal 5 tracking no first 1 AGES3193_p2_039 95300.00 225600.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-28 20:24:14 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-28 20:24:14 LOG5 begin_task: Level: (2) ID = <10237> Status = 0 0 0 0 ok 2008-Apr-28 20:24:14 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES3193_p2_037' 2008-Apr-28 20:24:14 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-28 20:24:14 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p2_039} 2008-Apr-28 20:24:14 INFO3 fixed_driftmap: Sending telescope to Az = 119.86 and ZA = 9.57 2008-Apr-28 20:24:14 LOG3 track_source: Calling 'track_source AGES3193_p2_039 119.86 9.5660196456 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-28 20:24:14 START begin_task: Starting task 'sending tracking commands' 2008-Apr-28 20:24:14 LOG5 begin_task: Level: (3) ID = <10238> Status = 0 0 0 0 ok 2008-Apr-28 20:24:14 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_039} INFO {Slewing to source 'AGES3193_p2_039' ...} 2008-Apr-28 20:24:14 INFO1 track_source: Starting to track AGES3193_p2_039 2008-Apr-28 20:24:14 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_039" 2008-Apr-28 20:24:14 LOG3 vw_send: To DATATAKING: set ra 119.86 2008-Apr-28 20:24:14 LOG3 vw_send: To DATATAKING: set dec 9.5660196456 2008-Apr-28 20:24:14 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-28 20:24:14 LOG3 vw_send: To DATATAKING: pnt tr 119.86 9.5660196456 -CF 2008-Apr-28 20:24:14 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-28 20:24:14 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-28 20:24:14 LOG5 finish_task: Level: (3) ID = <10238> Status = 0 0 0 0 ok 2008-Apr-28 20:24:14 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-28 20:24:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 20:24:14 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-28 20:24:14 LOG5 end_task: Level: (3) ID = <10238> Status = 0 0 0 0 ok 2008-Apr-28 20:24:14 START begin_task: Starting task 'rotate ALFA to +78.7 degrees' 2008-Apr-28 20:24:14 LOG5 begin_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2008-Apr-28 20:24:14 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +78.7 degrees ...} 2008-Apr-28 20:24:14 INFO2 rotate_alfa: ALFA commanded to +78.7 degrees 2008-Apr-28 20:24:14 LOG3 sock_errsend: To ALFAMOTOR: POSITION 78.7 REPLY 2008-Apr-28 20:24:14 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-28 20:24:14 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-28 20:24:14 LOG5 begin_task: Level: (4) ID = <10240> Status = 0 0 0 0 ok 2008-Apr-28 20:24:14 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_039" 2008-Apr-28 20:24:14 LOG4 got_cormsg: From DATATAKING: set ra 119.86 2008-Apr-28 20:24:14 LOG4 got_cormsg: From DATATAKING: set dec 9.5660196456 2008-Apr-28 20:24:14 LOG4 got_cormsg: From DATATAKING: vw% 119.86 2008-Apr-28 20:24:14 LOG4 got_cormsg: From DATATAKING: vw% 9.5660196456 2008-Apr-28 20:24:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 20:24:14 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-28 20:24:14 LOG4 got_cormsg: From DATATAKING: pnt tr 119.86 9.5660196456 -CF 2008-Apr-28 20:24:14 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-28 20:24:14 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-28 20:24:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 20:24:32 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-28 20:24:32 INFO3 alfa_motor: ALFA rotator in-position +78.70 degrees 2008-Apr-28 20:24:32 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-28 20:24:32 LOG5 end_task: Level: (4) ID = <10240> Status = 0 0 0 0 ok 2008-Apr-28 20:24:32 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-28 20:24:32 STOP finish_task: Finishing task 'rotate ALFA to +78.7 degrees' 2008-Apr-28 20:24:32 LOG5 finish_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2008-Apr-28 20:24:32 INFO2 finish_task: DONE finished configuration: rotating ALFA to +78.7 degrees 2008-Apr-28 20:24:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 20:24:32 STOP end_task: Finishing task 'rotate ALFA to +78.7 degrees' with status 'OK' 2008-Apr-28 20:24:32 LOG5 end_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2008-Apr-28 20:24:32 START begin_task: Starting task 'waiting on telescope' 2008-Apr-28 20:24:32 LOG5 begin_task: Level: (3) ID = <10241> Status = 0 0 0 0 ok 2008-Apr-28 20:24:32 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-28 20:24:32 LOG3 waittrk: Start waittrk 5 2008-Apr-28 20:24:32 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-28 20:24:32 LOG5 begin_task: Level: (4) ID = <10242> Status = 0 0 0 0 ok 2008-Apr-28 20:24:37 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-28 20:24:37 LOG5 end_task: Level: (4) ID = <10242> Status = 0 0 0 0 ok 2008-Apr-28 20:24:37 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-28 20:24:37 LOG5 begin_task: Level: (4) ID = <10243> Status = 0 0 0 0 ok 2008-Apr-28 20:26:02 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-28 20:26:02 LOG5 end_task: Level: (4) ID = <10243> Status = 0 0 0 0 ok 2008-Apr-28 20:26:02 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-28 20:26:02 INFO2 waittrk: Now tracking AGES3193_p2_039 2008-Apr-28 20:26:02 LOG4 waittrk: Current telescope position: Az = 119.66 ZA = 9.57 2008-Apr-28 20:26:02 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-28 20:26:02 LOG5 finish_task: Level: (3) ID = <10241> Status = 0 0 0 0 ok 2008-Apr-28 20:26:02 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-28 20:26:02 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 20:26:02 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-28 20:26:02 LOG5 end_task: Level: (3) ID = <10241> Status = 0 0 0 0 ok 2008-Apr-28 20:26:02 START begin_task: Starting task 'selecting calibration type' 2008-Apr-28 20:26:02 LOG5 begin_task: Level: (3) ID = <10244> Status = 0 0 0 0 ok 2008-Apr-28 20:26:02 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-28 20:26:02 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-28 20:26:02 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 20:26:02 START begin_task: Starting task 'waiting on setcal' 2008-Apr-28 20:26:02 LOG5 begin_task: Level: (4) ID = <10245> Status = 0 0 0 0 ok 2008-Apr-28 20:26:02 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-28 20:26:02 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 20:26:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 20:26:03 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-28 20:26:03 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-28 20:26:03 LOG5 end_task: Level: (4) ID = <10245> Status = 0 0 0 0 ok 2008-Apr-28 20:26:03 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-28 20:26:03 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-28 20:26:03 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-28 20:26:03 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-28 20:26:03 LOG5 begin_task: Level: (4) ID = <10246> Status = 0 0 0 0 ok 2008-Apr-28 20:26:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 20:26:03 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-28 20:26:03 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-28 20:26:03 LOG5 end_task: Level: (4) ID = <10246> Status = 0 0 0 0 ok 2008-Apr-28 20:26:03 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-28 20:26:03 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-28 20:26:03 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-28 20:26:03 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-28 20:26:03 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-28 20:26:03 LOG5 begin_task: Level: (4) ID = <10247> Status = 0 0 0 0 ok 2008-Apr-28 20:26:03 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-28 20:26:03 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-28 20:26:03 LOG5 end_task: Level: (4) ID = <10247> Status = 0 0 0 0 ok 2008-Apr-28 20:26:03 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-28 20:26:03 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-28 20:26:03 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-28 20:26:03 LOG5 finish_task: Level: (3) ID = <10244> Status = 0 0 0 0 ok 2008-Apr-28 20:26:03 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-28 20:26:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 20:26:03 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-28 20:26:03 LOG5 end_task: Level: (3) ID = <10244> Status = 0 0 0 0 ok 2008-Apr-28 20:26:03 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2008-Apr-28 20:26:03 INFO2 astwait: Waiting for 6 seconds from 00:26:03 to 00:26:09 UTC ... 2008-Apr-28 20:26:03 LOG4 send_obs_status: To obs_status: <1> TASKTIME 6 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-28 20:26:03 START begin_task: Starting task 'waiting on waiting for AST time' 2008-Apr-28 20:26:03 LOG5 begin_task: Level: (3) ID = <10248> Status = 0 0 0 0 ok 2008-Apr-28 20:26:09 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2008-Apr-28 20:26:09 LOG5 end_task: Level: (3) ID = <10248> Status = 0 0 0 0 ok 2008-Apr-28 20:26:09 INFO3 astwait: Finished waiting 2008-Apr-28 20:26:09 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-28 20:26:09 LOG5 dopset_later: Calling 'dopset_later 60.909424938030618' 2008-Apr-28 20:26:09 INFO3 dopset_later: Setting Doppler correction for 20:27:09 (60.9 seconds from now) 2008-Apr-28 20:26:09 LOG5 antvel: Calling 'antvel 119.860000 9.566020 F 60.909424938030618' 2008-Apr-28 20:26:09 LOG2 antvel: Parameters to Doppler: Heliocentric 88029 2008 119 0.0 2008-Apr-28 20:26:09 INFO5 antvel: Computed antenna velocity: +28.30618 km/s 2008-Apr-28 20:26:09 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=28.306184350700001 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-28 20:26:09 INFO4 dopset_gen: New sky frequencies: 1381.113025 1381.113025 1381.113025 1381.113025 1381.113025 1381.113025 1381.113025 1381.113025 1381.113025 2008-Apr-28 20:26:09 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.113025 sky0=1381.113025 sky1=1381.113025 sky2=1381.113025 sky3=1381.113025 sky4=1381.113025 sky5=1381.113025 sky6=1381.113025 sky7=1381.113025 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-28 20:26:09 LOG2 dopset_gen: Result from 'sky2syn': 1631.113025 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-28 20:26:09 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631113025.0} 2008-Apr-28 20:26:09 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 20:26:09 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-28 20:26:09 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-28 20:26:09 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:03.1 Dec = +22:56:02.1 2008-Apr-28 20:26:09 LOG3 track_source: Calling 'track_source AGES3193_p2_039 095203.1 225602.1 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-28 20:26:09 START begin_task: Starting task 'sending tracking commands' 2008-Apr-28 20:26:09 LOG5 begin_task: Level: (3) ID = <10249> Status = 0 0 0 0 ok 2008-Apr-28 20:26:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_039} INFO {Slewing to source 'AGES3193_p2_039' ...} 2008-Apr-28 20:26:09 INFO1 track_source: Starting to track AGES3193_p2_039 2008-Apr-28 20:26:09 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_039" 2008-Apr-28 20:26:09 LOG3 vw_send: To DATATAKING: set ra 095203.1 2008-Apr-28 20:26:09 LOG3 vw_send: To DATATAKING: set dec 225602.1 2008-Apr-28 20:26:09 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-28 20:26:09 LOG3 vw_send: To DATATAKING: pnt tr 095203.1 225602.1 -CJ 2008-Apr-28 20:26:09 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-28 20:26:09 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-28 20:26:09 LOG5 finish_task: Level: (3) ID = <10249> Status = 0 0 0 0 ok 2008-Apr-28 20:26:09 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-28 20:26:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 20:26:09 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-28 20:26:09 LOG5 end_task: Level: (3) ID = <10249> Status = 0 0 0 0 ok 2008-Apr-28 20:26:09 START begin_task: Starting task 'waiting on telescope' 2008-Apr-28 20:26:09 LOG5 begin_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2008-Apr-28 20:26:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-28 20:26:09 LOG3 waittrk: Start waittrk 5 2008-Apr-28 20:26:09 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-28 20:26:09 LOG5 begin_task: Level: (4) ID = <10251> Status = 0 0 0 0 ok 2008-Apr-28 20:26:09 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631113025.0} 2008-Apr-28 20:26:09 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 20:26:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 20:26:09 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_039" 2008-Apr-28 20:26:09 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-28 20:26:09 LOG4 got_cormsg: From DATATAKING: set ra 095203.1 2008-Apr-28 20:26:09 LOG4 got_cormsg: From DATATAKING: set dec 225602.1 2008-Apr-28 20:26:09 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-28 20:26:09 LOG4 got_cormsg: From DATATAKING: pnt tr 095203.1 225602.1 -CJ 2008-Apr-28 20:26:09 LOG4 got_cormsg: From DATATAKING: 095203.1 2008-Apr-28 20:26:09 LOG4 got_cormsg: From DATATAKING: vw% 225602.1 2008-Apr-28 20:26:09 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2008-Apr-28 20:26:09 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-28 20:26:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 20:26:14 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-28 20:26:14 LOG5 end_task: Level: (4) ID = <10251> Status = 0 0 0 0 ok 2008-Apr-28 20:26:14 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-28 20:26:14 LOG5 begin_task: Level: (4) ID = <10252> Status = 0 0 0 0 ok 2008-Apr-28 20:26:16 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-28 20:26:16 LOG5 end_task: Level: (4) ID = <10252> Status = 0 0 0 0 ok 2008-Apr-28 20:26:16 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-28 20:26:16 INFO2 waittrk: Now tracking AGES3193_p2_039 2008-Apr-28 20:26:16 LOG4 waittrk: Current telescope position: Az = 119.62 ZA = 9.59 2008-Apr-28 20:26:16 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-28 20:26:16 LOG5 finish_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2008-Apr-28 20:26:16 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-28 20:26:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 20:26:16 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-28 20:26:16 LOG5 end_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2008-Apr-28 20:26:16 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-28 20:26:16 LOG5 begin_task: Level: (3) ID = <10253> Status = 0 0 0 0 ok 2008-Apr-28 20:26:16 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-28 20:26:16 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-28 20:26:16 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-28 20:26:16 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-28 20:26:16 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 20:26:16 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-28 20:26:16 LOG5 begin_task: Level: (4) ID = <10254> Status = 0 0 0 0 ok 2008-Apr-28 20:26:16 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-28 20:26:16 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 20:26:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 20:26:17 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-28 20:26:17 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-28 20:26:17 LOG5 end_task: Level: (4) ID = <10254> Status = 0 0 0 0 ok 2008-Apr-28 20:26:17 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-28 20:26:17 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-28 20:26:17 LOG5 begin_task: Level: (4) ID = <10255> Status = 0 0 0 0 ok 2008-Apr-28 20:26:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-28 20:26:17 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-28 20:26:17 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-28 20:26:17 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-28 20:26:17 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-28 20:26:17 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-28 20:26:17 LOG5 begin_task: Level: (5) ID = <10256> Status = 0 0 0 0 ok 2008-Apr-28 20:26:17 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-28 20:26:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 20:26:17 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 1 dB --- beam 1: 7 6 dB 2008-Apr-28 20:26:17 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-28 20:26:17 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 6 dB 2008-Apr-28 20:26:17 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 2 3 dB 2008-Apr-28 20:26:17 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-28 20:26:17 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-28 20:26:17 LOG5 end_task: Level: (5) ID = <10256> Status = 0 0 0 0 ok 2008-Apr-28 20:26:17 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.872 0.970 ALFA beam 1: 1.092 1.048 2008-Apr-28 20:26:17 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.066 0.954 ALFA beam 3: 1.011 1.034 2008-Apr-28 20:26:17 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.932 0.944 ALFA beam 5: 1.007 0.906 2008-Apr-28 20:26:17 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.971 1.021 ALFA beam 7: 1.058 0.909 2008-Apr-28 20:26:17 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-28 20:26:17 LOG5 finish_task: Level: (4) ID = <10255> Status = 0 0 0 0 ok 2008-Apr-28 20:26:17 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-28 20:26:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 20:26:17 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-28 20:26:17 LOG5 end_task: Level: (4) ID = <10255> Status = 0 0 0 0 ok 2008-Apr-28 20:26:17 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-28 20:26:17 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-28 20:26:17 LOG5 finish_task: Level: (3) ID = <10253> Status = 0 0 0 0 ok 2008-Apr-28 20:26:17 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-28 20:26:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 20:26:17 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-28 20:26:17 LOG5 end_task: Level: (3) ID = <10253> Status = 0 0 0 0 ok 2008-Apr-28 20:26:17 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Steve Schnei 2008-Apr-28 20:26:17 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Steve Schnei 2008-Apr-28 20:26:17 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Steve Schnei 2008-Apr-28 20:26:17 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Steve Schnei 2008-Apr-28 20:26:18 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-28 20:26:18 START begin_task: Starting task 'WAPP calibration' 2008-Apr-28 20:26:18 LOG5 begin_task: Level: (3) ID = <10257> Status = 0 0 0 0 ok 2008-Apr-28 20:26:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-28 20:26:18 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-28 20:26:18 START begin_task: Starting task 'selecting calibration type' 2008-Apr-28 20:26:18 LOG5 begin_task: Level: (4) ID = <10258> Status = 0 0 0 0 ok 2008-Apr-28 20:26:18 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-28 20:26:18 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-28 20:26:18 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 20:26:18 START begin_task: Starting task 'waiting on setcal' 2008-Apr-28 20:26:18 LOG5 begin_task: Level: (5) ID = <10259> Status = 0 0 0 0 ok 2008-Apr-28 20:26:18 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Steve Schnei' 2008-Apr-28 20:26:18 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-28 20:26:18 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 20:26:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 20:26:18 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-28 20:26:18 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-28 20:26:18 LOG5 end_task: Level: (5) ID = <10259> Status = 0 0 0 0 ok 2008-Apr-28 20:26:18 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-28 20:26:18 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-28 20:26:18 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-28 20:26:18 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-28 20:26:18 LOG5 begin_task: Level: (5) ID = <10260> Status = 0 0 0 0 ok 2008-Apr-28 20:26:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 20:26:18 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-28 20:26:18 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-28 20:26:18 LOG5 end_task: Level: (5) ID = <10260> Status = 0 0 0 0 ok 2008-Apr-28 20:26:18 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-28 20:26:18 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-28 20:26:18 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-28 20:26:18 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-28 20:26:18 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-28 20:26:18 LOG5 begin_task: Level: (5) ID = <10261> Status = 0 0 0 0 ok 2008-Apr-28 20:26:18 NOTE WAPPDATA-new_file: New FITS file: wapp.20080428.a2048.0005.fits 2008-Apr-28 20:26:18 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-28 20:26:18 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-28 20:26:18 LOG5 end_task: Level: (5) ID = <10261> Status = 0 0 0 0 ok 2008-Apr-28 20:26:18 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-28 20:26:18 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-28 20:26:18 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-28 20:26:18 LOG5 finish_task: Level: (4) ID = <10258> Status = 0 0 0 0 ok 2008-Apr-28 20:26:18 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-28 20:26:18 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 20:26:18 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-28 20:26:18 LOG5 end_task: Level: (4) ID = <10258> Status = 0 0 0 0 ok 2008-Apr-28 20:26:18 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-28 20:26:18 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-28 20:26:18 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-28 20:26:18 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-28 20:26:18 LOG5 begin_task: Level: (4) ID = <10262> Status = 0 0 0 0 ok 2008-Apr-28 20:26:18 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080428.a2048.0005.fits} 2008-Apr-28 20:26:18 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-28 20:26:18 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-28 20:26:18 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-28 20:26:18 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-28 20:26:18 LOG5 end_task: Level: (4) ID = <10262> Status = 0 0 0 0 ok 2008-Apr-28 20:26:18 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-28 20:26:18 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-28 20:26:18 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-28 20:26:18 LOG5 begin_task: Level: (4) ID = <10263> Status = 0 0 0 0 ok 2008-Apr-28 20:26:18 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-28 20:26:18 LOG5 log_alfabeam: Parameters: 9.867527777777779 22.933916666666669 10.477326 2008.3281357897938 78.699982 2008-Apr-28 20:26:18 LOG4 log_alfabeam: ALFABEAM 0 9.867527777777783 22.933916666666651 2008-Apr-28 20:26:18 LOG4 log_alfabeam: ALFABEAM 1 9.869892354588655 22.841343467395603 2008-Apr-28 20:26:18 LOG4 log_alfabeam: ALFABEAM 2 9.874872931178395 22.902926993655456 2008-Apr-28 20:26:18 LOG4 log_alfabeam: ALFABEAM 3 9.872562802970991 22.995588679879052 2008-Apr-28 20:26:18 LOG4 log_alfabeam: ALFABEAM 4 9.865223875929175 23.027157569289717 2008-Apr-28 20:26:18 LOG4 log_alfabeam: ALFABEAM 5 9.860168895383547 22.964469174280669 2008-Apr-28 20:26:18 LOG4 log_alfabeam: ALFABEAM 6 9.862527681573161 22.871315686180328 2008-Apr-28 20:26:18 INFO2 take_spectra: Starting WAPP scan: 811900101 2008-Apr-28 20:26:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-28 20:26:19 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-28 20:26:19 LOG5 begin_task: Level: (5) ID = <10264> Status = 0 0 0 0 ok 2008-Apr-28 20:26:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-28 20:26:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1580.00 2008-Apr-28 20:26:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.113025 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-28 20:26:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.113025 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 20:26:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.113025 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 20:26:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.113025 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 20:26:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.113025 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 20:26:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.487 > 1.4)! 2008-Apr-28 20:26:25 LOG4 check_wapp_levels: WAPP-1 power levels: 1.231 1.247 1.487 1.432 2008-Apr-28 20:26:25 LOG4 check_wapp_levels: WAPP-2 power levels: 1.066 0.954 1.011 1.034 2008-Apr-28 20:26:25 LOG4 check_wapp_levels: WAPP-3 power levels: 0.932 0.944 1.007 0.906 2008-Apr-28 20:26:25 LOG4 check_wapp_levels: WAPP-4 power levels: 0.971 1.021 1.058 0.909 2008-Apr-28 20:26:25 LOG3 WAPP=1+3+4-save_rfcalc: Channel 5: Sky freq = 1381.113025 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-28 20:26:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.113025 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-28 20:26:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.113025 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-28 20:26:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.113025 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-28 20:26:25 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-28 20:26:25 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-28 20:26:25 LOG5 end_task: Level: (5) ID = <10264> Status = 0 0 0 0 ok 2008-Apr-28 20:26:25 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-28 20:26:25 LOG5 end_task: Level: (4) ID = <10263> Status = 0 0 0 0 ok 2008-Apr-28 20:26:25 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-28 20:26:25 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-28 20:26:25 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-28 20:26:25 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-28 20:26:25 LOG5 begin_task: Level: (4) ID = <10265> Status = 0 0 0 0 ok 2008-Apr-28 20:26:25 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-28 20:26:25 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-28 20:26:25 LOG3 WAPP=2-save_rfcalc: Channel 5: Sky freq = 1381.113025 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-28 20:26:25 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-28 20:26:25 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-28 20:26:25 LOG5 end_task: Level: (4) ID = <10265> Status = 0 0 0 0 ok 2008-Apr-28 20:26:25 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-28 20:26:25 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-28 20:26:25 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-28 20:26:25 LOG5 begin_task: Level: (4) ID = <10266> Status = 0 0 0 0 ok 2008-Apr-28 20:26:25 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-28 20:26:25 LOG5 log_alfabeam: Parameters: 9.867527777777779 22.933916666666669 10.479276 2008.3281360116105 78.699982 2008-Apr-28 20:26:25 LOG4 log_alfabeam: ALFABEAM 0 9.867527777777784 22.933916666666672 2008-Apr-28 20:26:25 LOG4 log_alfabeam: ALFABEAM 1 9.869901924728175 22.841389778985736 2008-Apr-28 20:26:25 LOG4 log_alfabeam: ALFABEAM 2 9.874876173756615 22.903073751566339 2008-Apr-28 20:26:25 LOG4 log_alfabeam: ALFABEAM 3 9.872556323192882 22.995690021671251 2008-Apr-28 20:26:25 LOG4 log_alfabeam: ALFABEAM 4 9.865214060566686 23.027110736635287 2008-Apr-28 20:26:25 LOG4 log_alfabeam: ALFABEAM 5 9.860165731375002 22.964323066177318 2008-Apr-28 20:26:25 LOG4 log_alfabeam: ALFABEAM 6 9.862534178287554 22.871217321682767 2008-Apr-28 20:26:25 INFO2 take_spectra: Starting WAPP scan: 811900102 2008-Apr-28 20:26:26 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-28 20:26:26 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-28 20:26:26 LOG5 begin_task: Level: (5) ID = <10267> Status = 0 0 0 0 ok 2008-Apr-28 20:26:26 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-28 20:26:26 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1587.00 2008-Apr-28 20:26:31 INFO5 check_wapp_levels: WAPP power levels are between 1.221 and 1.509 (still bad) 2008-Apr-28 20:26:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.113025 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-28 20:26:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.113025 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 20:26:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.113025 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 20:26:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.113025 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 20:26:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.113025 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 20:26:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.113025 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-28 20:26:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.113025 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-28 20:26:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.113025 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-28 20:26:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.113025 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-28 20:26:32 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-28 20:26:32 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-28 20:26:32 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-28 20:26:32 LOG5 end_task: Level: (5) ID = <10267> Status = 0 0 0 0 ok 2008-Apr-28 20:26:32 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-28 20:26:32 LOG5 end_task: Level: (4) ID = <10266> Status = 0 0 0 0 ok 2008-Apr-28 20:26:32 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-28 20:26:32 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-28 20:26:32 LOG5 finish_task: Level: (3) ID = <10257> Status = 0 0 0 0 ok 2008-Apr-28 20:26:32 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-28 20:26:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 20:26:32 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-28 20:26:32 LOG5 end_task: Level: (3) ID = <10257> Status = 0 0 0 0 ok 2008-Apr-28 20:26:32 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-28 20:26:32 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 119.86 and ZA = 9.57 2008-Apr-28 20:26:32 LOG3 track_source: Calling 'track_source AGES3193_p2_039 119.86 9.5660196456 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-28 20:26:32 START begin_task: Starting task 'sending tracking commands' 2008-Apr-28 20:26:32 LOG5 begin_task: Level: (3) ID = <10268> Status = 0 0 0 0 ok 2008-Apr-28 20:26:32 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_039} INFO {Slewing to source 'AGES3193_p2_039' ...} 2008-Apr-28 20:26:32 INFO1 track_source: Starting to track AGES3193_p2_039 2008-Apr-28 20:26:32 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_039" 2008-Apr-28 20:26:32 LOG3 vw_send: To DATATAKING: set ra 119.86 2008-Apr-28 20:26:32 LOG3 vw_send: To DATATAKING: set dec 9.5660196456 2008-Apr-28 20:26:32 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-28 20:26:32 LOG3 vw_send: To DATATAKING: pnt tr 119.86 9.5660196456 -CF 2008-Apr-28 20:26:32 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-28 20:26:32 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-28 20:26:32 LOG5 finish_task: Level: (3) ID = <10268> Status = 0 0 0 0 ok 2008-Apr-28 20:26:32 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-28 20:26:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 20:26:33 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-28 20:26:33 LOG5 end_task: Level: (3) ID = <10268> Status = 0 0 0 0 ok 2008-Apr-28 20:26:33 LOG1 fixed_driftmap: Parameters: HA = +00:36:00.2 Start = 10:29:29.4 LST = 10:28:52.4 diff = 37.0 secs 2008-Apr-28 20:26:33 INFO2 fixed_driftmap: Waiting 35 seconds for RA 9:53:29 2008-Apr-28 20:26:33 INFO2 lstwait: Waiting for 34.9 secs from LST 10:28:52 to LST 10:29:27 ... 2008-Apr-28 20:26:33 LOG4 send_obs_status: To obs_status: <1> TASKTIME 34.914595544433304 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-28 20:26:33 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-28 20:26:33 LOG5 begin_task: Level: (3) ID = <10269> Status = 0 0 0 0 ok 2008-Apr-28 20:26:33 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_039" 2008-Apr-28 20:26:33 LOG4 got_cormsg: From DATATAKING: set ra 119.86 2008-Apr-28 20:26:33 LOG4 got_cormsg: From DATATAKING: set dec 9.5660196456 2008-Apr-28 20:26:33 LOG4 got_cormsg: From DATATAKING: vw% 119.86 2008-Apr-28 20:26:33 LOG4 got_cormsg: From DATATAKING: vw% 9.5660196456 2008-Apr-28 20:26:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 20:26:33 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-28 20:26:33 LOG4 got_cormsg: From DATATAKING: pnt tr 119.86 9.5660196456 -CF 2008-Apr-28 20:26:33 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-28 20:26:33 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-28 20:26:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 20:26:37 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.891 and 1.093 2008-Apr-28 20:27:08 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-28 20:27:08 LOG5 end_task: Level: (3) ID = <10269> Status = 0 0 0 0 ok 2008-Apr-28 20:27:08 LOG4 lstwait: Finished waiting, the gui caused difference: 0.086212640002969465 2008-Apr-28 20:27:08 INFO3 lstwait: Finished waiting 2008-Apr-28 20:27:08 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-28 20:27:08 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-28 20:27:08 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-28 20:27:08 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-28 20:27:08 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-28 20:27:08 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-28 20:27:08 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-28 20:27:08 LOG5 begin_task: Level: (3) ID = <10270> Status = 0 0 0 0 ok 2008-Apr-28 20:27:08 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-28 20:27:08 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-28 20:27:08 INFO2 take_spectra: Starting WAPP scan: 811900103 2008-Apr-28 20:27:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-28 20:27:08 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-28 20:27:08 LOG5 begin_task: Level: (4) ID = <10271> Status = 0 0 0 0 ok 2008-Apr-28 20:27:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-28 20:27:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1629.00 2008-Apr-28 20:27:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.113025 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-28 20:27:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.113025 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 20:27:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.113025 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 20:27:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.113025 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 20:27:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.113025 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 20:27:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.113025 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-28 20:27:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.113025 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-28 20:27:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.113025 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-28 20:27:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.113025 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-28 20:47:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-28 20:47:09 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-28 20:47:09 LOG5 end_task: Level: (4) ID = <10271> Status = 0 0 0 0 ok 2008-Apr-28 20:47:09 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-28 20:47:09 LOG5 end_task: Level: (3) ID = <10270> Status = 0 0 0 0 ok 2008-Apr-28 20:47:09 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-28 20:47:09 LOG5 finish_task: Level: (2) ID = <10237> Status = 0 0 0 0 ok 2008-Apr-28 20:47:09 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-28 20:47:09 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-28 20:47:09 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-28 20:47:09 LOG5 end_task: Level: (2) ID = <10237> Status = 0 0 0 0 ok 2008-Apr-28 20:47:09 COMMAND run_command_line: EXECUTING command 27: 'FIXEDDRIFT az=110.53 alfaangle=-88.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_041 ra=95300.00 dec=225300.00' 2008-Apr-28 20:47:09 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-28 20:47:10 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-28 20:47:10 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 110.53 -88.6 hcorcal 5 tracking no first 1 AGES3193_p2_041 95300.00 225300.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-28 20:47:10 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-28 20:47:10 LOG5 begin_task: Level: (2) ID = <10272> Status = 0 0 0 0 ok 2008-Apr-28 20:47:10 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES3193_p2_039' 2008-Apr-28 20:47:10 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-28 20:47:10 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p2_041} 2008-Apr-28 20:47:10 INFO3 fixed_driftmap: Sending telescope to Az = 110.53 and ZA = 14.51 2008-Apr-28 20:47:10 LOG3 track_source: Calling 'track_source AGES3193_p2_041 110.53 14.5087750819 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-28 20:47:10 START begin_task: Starting task 'sending tracking commands' 2008-Apr-28 20:47:10 LOG5 begin_task: Level: (3) ID = <10273> Status = 0 0 0 0 ok 2008-Apr-28 20:47:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_041} INFO {Slewing to source 'AGES3193_p2_041' ...} 2008-Apr-28 20:47:10 INFO1 track_source: Starting to track AGES3193_p2_041 2008-Apr-28 20:47:10 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_041" 2008-Apr-28 20:47:10 LOG3 vw_send: To DATATAKING: set ra 110.53 2008-Apr-28 20:47:10 LOG3 vw_send: To DATATAKING: set dec 14.5087750819 2008-Apr-28 20:47:10 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-28 20:47:10 LOG3 vw_send: To DATATAKING: pnt tr 110.53 14.5087750819 -CF 2008-Apr-28 20:47:10 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-28 20:47:10 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-28 20:47:10 LOG5 finish_task: Level: (3) ID = <10273> Status = 0 0 0 0 ok 2008-Apr-28 20:47:10 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-28 20:47:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 20:47:10 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-28 20:47:10 LOG5 end_task: Level: (3) ID = <10273> Status = 0 0 0 0 ok 2008-Apr-28 20:47:10 START begin_task: Starting task 'rotate ALFA to -88.6 degrees' 2008-Apr-28 20:47:10 LOG5 begin_task: Level: (3) ID = <10274> Status = 0 0 0 0 ok 2008-Apr-28 20:47:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -88.6 degrees ...} 2008-Apr-28 20:47:10 INFO2 rotate_alfa: ALFA commanded to -88.6 degrees 2008-Apr-28 20:47:10 LOG3 sock_errsend: To ALFAMOTOR: POSITION -88.6 REPLY 2008-Apr-28 20:47:10 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-28 20:47:10 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-28 20:47:10 LOG5 begin_task: Level: (4) ID = <10275> Status = 0 0 0 0 ok 2008-Apr-28 20:47:10 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_041" 2008-Apr-28 20:47:10 LOG4 got_cormsg: From DATATAKING: set ra 110.53 2008-Apr-28 20:47:10 LOG4 got_cormsg: From DATATAKING: set dec 14.5087750819 2008-Apr-28 20:47:10 LOG4 got_cormsg: From DATATAKING: vw% 110.53 2008-Apr-28 20:47:10 LOG4 got_cormsg: From DATATAKING: vw% 14.5087750819 2008-Apr-28 20:47:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 20:47:10 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-28 20:47:10 LOG4 got_cormsg: From DATATAKING: pnt tr 110.53 14.5087750819 -CF 2008-Apr-28 20:47:10 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-28 20:47:10 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-28 20:47:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 20:48:43 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-28 20:48:43 INFO3 alfa_motor: ALFA rotator in-position -88.60 degrees 2008-Apr-28 20:48:43 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-28 20:48:43 LOG5 end_task: Level: (4) ID = <10275> Status = 0 0 0 0 ok 2008-Apr-28 20:48:43 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-28 20:48:43 STOP finish_task: Finishing task 'rotate ALFA to -88.6 degrees' 2008-Apr-28 20:48:43 LOG5 finish_task: Level: (3) ID = <10274> Status = 0 0 0 0 ok 2008-Apr-28 20:48:43 INFO2 finish_task: DONE finished configuration: rotating ALFA to -88.6 degrees 2008-Apr-28 20:48:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 20:48:43 STOP end_task: Finishing task 'rotate ALFA to -88.6 degrees' with status 'OK' 2008-Apr-28 20:48:43 LOG5 end_task: Level: (3) ID = <10274> Status = 0 0 0 0 ok 2008-Apr-28 20:48:43 START begin_task: Starting task 'waiting on telescope' 2008-Apr-28 20:48:43 LOG5 begin_task: Level: (3) ID = <10276> Status = 0 0 0 0 ok 2008-Apr-28 20:48:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-28 20:48:43 LOG3 waittrk: Start waittrk 5 2008-Apr-28 20:48:43 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-28 20:48:43 LOG5 begin_task: Level: (4) ID = <10277> Status = 0 0 0 0 ok 2008-Apr-28 20:48:48 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-28 20:48:48 LOG5 end_task: Level: (4) ID = <10277> Status = 0 0 0 0 ok 2008-Apr-28 20:48:48 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-28 20:48:48 LOG5 begin_task: Level: (4) ID = <10278> Status = 0 0 0 0 ok 2008-Apr-28 20:49:19 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-28 20:49:19 LOG5 end_task: Level: (4) ID = <10278> Status = 0 0 0 0 ok 2008-Apr-28 20:49:19 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-28 20:49:19 INFO2 waittrk: Now tracking AGES3193_p2_041 2008-Apr-28 20:49:19 LOG4 waittrk: Current telescope position: Az = 110.29 ZA = 14.52 2008-Apr-28 20:49:19 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-28 20:49:19 LOG5 finish_task: Level: (3) ID = <10276> Status = 0 0 0 0 ok 2008-Apr-28 20:49:19 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-28 20:49:19 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 20:49:19 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-28 20:49:19 LOG5 end_task: Level: (3) ID = <10276> Status = 0 0 0 0 ok 2008-Apr-28 20:49:19 START begin_task: Starting task 'selecting calibration type' 2008-Apr-28 20:49:19 LOG5 begin_task: Level: (3) ID = <10279> Status = 0 0 0 0 ok 2008-Apr-28 20:49:19 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-28 20:49:19 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-28 20:49:19 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 20:49:19 START begin_task: Starting task 'waiting on setcal' 2008-Apr-28 20:49:19 LOG5 begin_task: Level: (4) ID = <10280> Status = 0 0 0 0 ok 2008-Apr-28 20:49:20 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-28 20:49:20 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 20:49:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 20:49:20 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-28 20:49:20 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-28 20:49:20 LOG5 end_task: Level: (4) ID = <10280> Status = 0 0 0 0 ok 2008-Apr-28 20:49:20 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-28 20:49:20 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-28 20:49:20 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-28 20:49:20 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-28 20:49:20 LOG5 begin_task: Level: (4) ID = <10281> Status = 0 0 0 0 ok 2008-Apr-28 20:49:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 20:49:20 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-28 20:49:20 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-28 20:49:20 LOG5 end_task: Level: (4) ID = <10281> Status = 0 0 0 0 ok 2008-Apr-28 20:49:21 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-28 20:49:21 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-28 20:49:21 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-28 20:49:21 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-28 20:49:21 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-28 20:49:21 LOG5 begin_task: Level: (4) ID = <10282> Status = 0 0 0 0 ok 2008-Apr-28 20:49:21 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-28 20:49:21 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-28 20:49:21 LOG5 end_task: Level: (4) ID = <10282> Status = 0 0 0 0 ok 2008-Apr-28 20:49:21 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-28 20:49:21 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-28 20:49:21 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-28 20:49:21 LOG5 finish_task: Level: (3) ID = <10279> Status = 0 0 0 0 ok 2008-Apr-28 20:49:21 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-28 20:49:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 20:49:21 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-28 20:49:21 LOG5 end_task: Level: (3) ID = <10279> Status = 0 0 0 0 ok 2008-Apr-28 20:49:21 LOG5 dopset_later: Calling 'dopset_later 44.744238246553863' 2008-Apr-28 20:49:21 INFO3 dopset_later: Setting Doppler correction for 20:50:05 (44.7 seconds from now) 2008-Apr-28 20:49:21 LOG5 antvel: Calling 'antvel 110.530000 14.508775 F 44.744238246553863' 2008-Apr-28 20:49:21 LOG2 antvel: Parameters to Doppler: Heliocentric 89405 2008 119 0.0 2008-Apr-28 20:49:21 INFO5 antvel: Computed antenna velocity: +28.34968 km/s 2008-Apr-28 20:49:21 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=28.349680605300001 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-28 20:49:21 INFO4 dopset_gen: New sky frequencies: 1381.112825 1381.112825 1381.112825 1381.112825 1381.112825 1381.112825 1381.112825 1381.112825 1381.112825 2008-Apr-28 20:49:21 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.112825 sky0=1381.112825 sky1=1381.112825 sky2=1381.112825 sky3=1381.112825 sky4=1381.112825 sky5=1381.112825 sky6=1381.112825 sky7=1381.112825 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-28 20:49:21 LOG2 dopset_gen: Result from 'sky2syn': 1631.112825 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-28 20:49:21 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631112825.0} 2008-Apr-28 20:49:21 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 20:49:21 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-28 20:49:21 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-28 20:49:21 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:19.3 Dec = +22:53:02.2 2008-Apr-28 20:49:21 LOG3 track_source: Calling 'track_source AGES3193_p2_041 095219.3 225302.2 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-28 20:49:21 START begin_task: Starting task 'sending tracking commands' 2008-Apr-28 20:49:21 LOG5 begin_task: Level: (3) ID = <10283> Status = 0 0 0 0 ok 2008-Apr-28 20:49:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_041} INFO {Slewing to source 'AGES3193_p2_041' ...} 2008-Apr-28 20:49:21 INFO1 track_source: Starting to track AGES3193_p2_041 2008-Apr-28 20:49:21 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_041" 2008-Apr-28 20:49:21 LOG3 vw_send: To DATATAKING: set ra 095219.3 2008-Apr-28 20:49:21 LOG3 vw_send: To DATATAKING: set dec 225302.2 2008-Apr-28 20:49:21 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-28 20:49:21 LOG3 vw_send: To DATATAKING: pnt tr 095219.3 225302.2 -CJ 2008-Apr-28 20:49:21 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-28 20:49:21 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-28 20:49:21 LOG5 finish_task: Level: (3) ID = <10283> Status = 0 0 0 0 ok 2008-Apr-28 20:49:21 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-28 20:49:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 20:49:21 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-28 20:49:21 LOG5 end_task: Level: (3) ID = <10283> Status = 0 0 0 0 ok 2008-Apr-28 20:49:21 START begin_task: Starting task 'waiting on telescope' 2008-Apr-28 20:49:21 LOG5 begin_task: Level: (3) ID = <10284> Status = 0 0 0 0 ok 2008-Apr-28 20:49:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-28 20:49:21 LOG3 waittrk: Start waittrk 5 2008-Apr-28 20:49:21 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-28 20:49:21 LOG5 begin_task: Level: (4) ID = <10285> Status = 0 0 0 0 ok 2008-Apr-28 20:49:21 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631112825.0} 2008-Apr-28 20:49:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 20:49:21 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_041" 2008-Apr-28 20:49:21 LOG4 got_cormsg: From DATATAKING: set ra 095219.3 2008-Apr-28 20:49:21 LOG4 got_cormsg: From DATATAKING: set dec 225302.2 2008-Apr-28 20:49:21 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-28 20:49:21 LOG4 got_cormsg: From DATATAKING: vw% 095219.3 2008-Apr-28 20:49:21 LOG4 got_cormsg: From DATATAKING: vw% 225302.2 2008-Apr-28 20:49:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 20:49:21 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-28 20:49:21 LOG4 got_cormsg: From DATATAKING: pnt tr 095219.3 225302.2 -CJ 2008-Apr-28 20:49:21 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-28 20:49:21 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-28 20:49:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 20:49:26 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-28 20:49:26 LOG5 end_task: Level: (4) ID = <10285> Status = 0 0 0 0 ok 2008-Apr-28 20:49:26 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-28 20:49:26 LOG5 begin_task: Level: (4) ID = <10286> Status = 0 0 0 0 ok 2008-Apr-28 20:49:28 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-28 20:49:28 LOG5 end_task: Level: (4) ID = <10286> Status = 0 0 0 0 ok 2008-Apr-28 20:49:28 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-28 20:49:28 INFO2 waittrk: Now tracking AGES3193_p2_041 2008-Apr-28 20:49:28 LOG4 waittrk: Current telescope position: Az = 110.27 ZA = 14.54 2008-Apr-28 20:49:28 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-28 20:49:28 LOG5 finish_task: Level: (3) ID = <10284> Status = 0 0 0 0 ok 2008-Apr-28 20:49:28 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-28 20:49:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 20:49:28 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-28 20:49:28 LOG5 end_task: Level: (3) ID = <10284> Status = 0 0 0 0 ok 2008-Apr-28 20:49:28 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-28 20:49:28 LOG5 begin_task: Level: (3) ID = <10287> Status = 0 0 0 0 ok 2008-Apr-28 20:49:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-28 20:49:28 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-28 20:49:28 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-28 20:49:28 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-28 20:49:29 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 20:49:29 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-28 20:49:29 LOG5 begin_task: Level: (4) ID = <10288> Status = 0 0 0 0 ok 2008-Apr-28 20:49:29 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-28 20:49:29 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 20:49:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 20:49:29 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-28 20:49:29 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-28 20:49:29 LOG5 end_task: Level: (4) ID = <10288> Status = 0 0 0 0 ok 2008-Apr-28 20:49:29 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-28 20:49:29 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-28 20:49:29 LOG5 begin_task: Level: (4) ID = <10289> Status = 0 0 0 0 ok 2008-Apr-28 20:49:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-28 20:49:29 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-28 20:49:29 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-28 20:49:29 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-28 20:49:29 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-28 20:49:29 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-28 20:49:29 LOG5 begin_task: Level: (5) ID = <10290> Status = 0 0 0 0 ok 2008-Apr-28 20:49:29 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-28 20:49:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 20:49:29 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 1 dB --- beam 1: 8 6 dB 2008-Apr-28 20:49:29 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-28 20:49:29 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 6 dB 2008-Apr-28 20:49:29 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 3 3 dB 2008-Apr-28 20:49:29 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-28 20:49:29 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-28 20:49:29 LOG5 end_task: Level: (5) ID = <10290> Status = 0 0 0 0 ok 2008-Apr-28 20:49:29 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.917 0.981 ALFA beam 1: 0.875 1.023 2008-Apr-28 20:49:29 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.068 0.962 ALFA beam 3: 1.011 1.077 2008-Apr-28 20:49:29 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.975 1.035 ALFA beam 5: 1.118 1.003 2008-Apr-28 20:49:29 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.054 1.032 ALFA beam 7: 0.917 0.920 2008-Apr-28 20:49:29 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-28 20:49:29 LOG5 finish_task: Level: (4) ID = <10289> Status = 0 0 0 0 ok 2008-Apr-28 20:49:29 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-28 20:49:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 20:49:29 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-28 20:49:29 LOG5 end_task: Level: (4) ID = <10289> Status = 0 0 0 0 ok 2008-Apr-28 20:49:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-28 20:49:30 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-28 20:49:30 LOG5 finish_task: Level: (3) ID = <10287> Status = 0 0 0 0 ok 2008-Apr-28 20:49:30 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-28 20:49:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 20:49:30 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-28 20:49:30 LOG5 end_task: Level: (3) ID = <10287> Status = 0 0 0 0 ok 2008-Apr-28 20:49:30 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Steve Schnei 2008-Apr-28 20:49:30 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Steve Schnei 2008-Apr-28 20:49:30 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Steve Schnei 2008-Apr-28 20:49:30 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Steve Schnei 2008-Apr-28 20:49:30 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-28 20:49:30 START begin_task: Starting task 'WAPP calibration' 2008-Apr-28 20:49:30 LOG5 begin_task: Level: (3) ID = <10291> Status = 0 0 0 0 ok 2008-Apr-28 20:49:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-28 20:49:30 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-28 20:49:30 START begin_task: Starting task 'selecting calibration type' 2008-Apr-28 20:49:30 LOG5 begin_task: Level: (4) ID = <10292> Status = 0 0 0 0 ok 2008-Apr-28 20:49:30 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-28 20:49:30 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-28 20:49:30 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 20:49:30 START begin_task: Starting task 'waiting on setcal' 2008-Apr-28 20:49:30 LOG5 begin_task: Level: (5) ID = <10293> Status = 0 0 0 0 ok 2008-Apr-28 20:49:30 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Steve Schnei' 2008-Apr-28 20:49:30 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-28 20:49:30 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 20:49:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 20:49:30 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-28 20:49:30 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-28 20:49:30 LOG5 end_task: Level: (5) ID = <10293> Status = 0 0 0 0 ok 2008-Apr-28 20:49:30 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-28 20:49:30 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-28 20:49:30 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-28 20:49:30 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-28 20:49:30 LOG5 begin_task: Level: (5) ID = <10294> Status = 0 0 0 0 ok 2008-Apr-28 20:49:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 20:49:30 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-28 20:49:30 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-28 20:49:30 LOG5 end_task: Level: (5) ID = <10294> Status = 0 0 0 0 ok 2008-Apr-28 20:49:30 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-28 20:49:30 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-28 20:49:30 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-28 20:49:30 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-28 20:49:30 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-28 20:49:30 LOG5 begin_task: Level: (5) ID = <10295> Status = 0 0 0 0 ok 2008-Apr-28 20:49:30 NOTE WAPPDATA-new_file: New FITS file: wapp.20080428.a2048.0006.fits 2008-Apr-28 20:49:30 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-28 20:49:30 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-28 20:49:30 LOG5 end_task: Level: (5) ID = <10295> Status = 0 0 0 0 ok 2008-Apr-28 20:49:30 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-28 20:49:30 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-28 20:49:30 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-28 20:49:30 LOG5 finish_task: Level: (4) ID = <10292> Status = 0 0 0 0 ok 2008-Apr-28 20:49:30 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-28 20:49:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 20:49:30 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-28 20:49:30 LOG5 end_task: Level: (4) ID = <10292> Status = 0 0 0 0 ok 2008-Apr-28 20:49:30 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-28 20:49:30 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-28 20:49:30 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-28 20:49:30 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-28 20:49:30 LOG5 begin_task: Level: (4) ID = <10296> Status = 0 0 0 0 ok 2008-Apr-28 20:49:31 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080428.a2048.0006.fits} 2008-Apr-28 20:49:31 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-28 20:49:31 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-28 20:49:31 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-28 20:49:31 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-28 20:49:31 LOG5 end_task: Level: (4) ID = <10296> Status = 0 0 0 0 ok 2008-Apr-28 20:49:31 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-28 20:49:31 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-28 20:49:31 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-28 20:49:31 LOG5 begin_task: Level: (4) ID = <10297> Status = 0 0 0 0 ok 2008-Apr-28 20:49:31 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-28 20:49:31 LOG5 log_alfabeam: Parameters: 9.8720277777777792 22.883944444444449 10.865052 2008.3281798996122 -88.600006 2008-Apr-28 20:49:31 LOG4 log_alfabeam: ALFABEAM 0 9.872027777777777 22.883944444444435 2008-Apr-28 20:49:31 LOG4 log_alfabeam: ALFABEAM 1 9.870009124880092 22.975005573979892 2008-Apr-28 20:49:31 LOG4 log_alfabeam: ALFABEAM 2 9.864624121022937 22.914117865048251 2008-Apr-28 20:49:31 LOG4 log_alfabeam: ALFABEAM 3 9.866674388255445 22.822930094276650 2008-Apr-28 20:49:31 LOG4 log_alfabeam: ALFABEAM 4 9.874084470501900 22.793295751469522 2008-Apr-28 20:49:31 LOG4 log_alfabeam: ALFABEAM 5 9.879428774768455 22.853724780410516 2008-Apr-28 20:49:31 LOG4 log_alfabeam: ALFABEAM 6 9.877403460905573 22.944247326399569 2008-Apr-28 20:49:31 INFO2 take_spectra: Starting WAPP scan: 811900104 2008-Apr-28 20:49:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-28 20:49:31 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-28 20:49:31 LOG5 begin_task: Level: (5) ID = <10298> Status = 0 0 0 0 ok 2008-Apr-28 20:49:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-28 20:49:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 2972.00 2008-Apr-28 20:49:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.112825 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-28 20:49:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.112825 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 20:49:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.112825 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 20:49:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.112825 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 20:49:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.112825 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 20:49:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.112825 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-28 20:49:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.112825 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-28 20:49:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.112825 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-28 20:49:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.112825 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-28 20:49:37 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-28 20:49:37 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-28 20:49:37 LOG5 end_task: Level: (5) ID = <10298> Status = 0 0 0 0 ok 2008-Apr-28 20:49:37 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-28 20:49:37 LOG5 end_task: Level: (4) ID = <10297> Status = 0 0 0 0 ok 2008-Apr-28 20:49:37 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-28 20:49:37 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-28 20:49:37 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-28 20:49:37 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-28 20:49:37 LOG5 begin_task: Level: (4) ID = <10299> Status = 0 0 0 0 ok 2008-Apr-28 20:49:37 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-28 20:49:37 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-28 20:49:37 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-28 20:49:37 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-28 20:49:37 LOG5 end_task: Level: (4) ID = <10299> Status = 0 0 0 0 ok 2008-Apr-28 20:49:37 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-28 20:49:37 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-28 20:49:37 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-28 20:49:37 LOG5 begin_task: Level: (4) ID = <10300> Status = 0 0 0 0 ok 2008-Apr-28 20:49:37 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-28 20:49:37 LOG5 log_alfabeam: Parameters: 9.8720277777777792 22.883944444444449 10.867002 2008.3281801214287 -88.600006 2008-Apr-28 20:49:37 LOG4 log_alfabeam: ALFABEAM 0 9.872027777777785 22.883944444444449 2008-Apr-28 20:49:37 LOG4 log_alfabeam: ALFABEAM 1 9.870004635464921 22.974986330281773 2008-Apr-28 20:49:37 LOG4 log_alfabeam: ALFABEAM 2 9.864622649542573 22.914048751463437 2008-Apr-28 20:49:37 LOG4 log_alfabeam: ALFABEAM 3 9.866677353416486 22.822880784622555 2008-Apr-28 20:49:37 LOG4 log_alfabeam: ALFABEAM 4 9.874088858106839 22.793314569139568 2008-Apr-28 20:49:37 LOG4 log_alfabeam: ALFABEAM 5 9.879430250441986 22.853793811662580 2008-Apr-28 20:49:37 LOG4 log_alfabeam: ALFABEAM 6 9.877400497126398 22.944298095340912 2008-Apr-28 20:49:37 INFO2 take_spectra: Starting WAPP scan: 811900105 2008-Apr-28 20:49:38 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-28 20:49:38 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-28 20:49:38 LOG5 begin_task: Level: (5) ID = <10301> Status = 0 0 0 0 ok 2008-Apr-28 20:49:38 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-28 20:49:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.522 > 1.4)! 2008-Apr-28 20:49:38 LOG4 check_wapp_levels: WAPP-1 power levels: 1.260 1.256 1.186 1.403 2008-Apr-28 20:49:38 LOG4 check_wapp_levels: WAPP-2 power levels: 1.442 1.330 1.395 1.467 2008-Apr-28 20:49:38 LOG4 check_wapp_levels: WAPP-3 power levels: 1.347 1.417 1.522 1.313 2008-Apr-28 20:49:38 LOG4 check_wapp_levels: WAPP-4 power levels: 1.470 1.439 1.279 1.282 2008-Apr-28 20:49:38 INFO1 WAPP=1+2+3+4-start_spectra: start sec 2979.00 2008-Apr-28 20:49:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.112825 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-28 20:49:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.112825 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 20:49:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.112825 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 20:49:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.112825 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 20:49:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.112825 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 20:49:44 INFO5 check_wapp_levels: WAPP power levels are between 0.879 and 1.470 (still bad) 2008-Apr-28 20:49:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.112825 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-28 20:49:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.112825 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-28 20:49:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.112825 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-28 20:49:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.112825 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-28 20:49:44 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-28 20:49:44 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-28 20:49:44 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-28 20:49:44 LOG5 end_task: Level: (5) ID = <10301> Status = 0 0 0 0 ok 2008-Apr-28 20:49:44 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-28 20:49:44 LOG5 end_task: Level: (4) ID = <10300> Status = 0 0 0 0 ok 2008-Apr-28 20:49:44 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-28 20:49:44 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-28 20:49:44 LOG5 finish_task: Level: (3) ID = <10291> Status = 0 0 0 0 ok 2008-Apr-28 20:49:44 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-28 20:49:44 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 20:49:44 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-28 20:49:44 LOG5 end_task: Level: (3) ID = <10291> Status = 0 0 0 0 ok 2008-Apr-28 20:49:44 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-28 20:49:44 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 110.53 and ZA = 14.51 2008-Apr-28 20:49:44 LOG3 track_source: Calling 'track_source AGES3193_p2_041 110.53 14.5087750819 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-28 20:49:44 START begin_task: Starting task 'sending tracking commands' 2008-Apr-28 20:49:44 LOG5 begin_task: Level: (3) ID = <10302> Status = 0 0 0 0 ok 2008-Apr-28 20:49:44 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_041} INFO {Slewing to source 'AGES3193_p2_041' ...} 2008-Apr-28 20:49:44 INFO1 track_source: Starting to track AGES3193_p2_041 2008-Apr-28 20:49:44 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_041" 2008-Apr-28 20:49:44 LOG3 vw_send: To DATATAKING: set ra 110.53 2008-Apr-28 20:49:44 LOG3 vw_send: To DATATAKING: set dec 14.5087750819 2008-Apr-28 20:49:44 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-28 20:49:44 LOG3 vw_send: To DATATAKING: pnt tr 110.53 14.5087750819 -CF 2008-Apr-28 20:49:44 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-28 20:49:44 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-28 20:49:44 LOG5 finish_task: Level: (3) ID = <10302> Status = 0 0 0 0 ok 2008-Apr-28 20:49:44 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-28 20:49:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 20:49:45 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-28 20:49:45 LOG5 end_task: Level: (3) ID = <10302> Status = 0 0 0 0 ok 2008-Apr-28 20:49:45 LOG1 fixed_driftmap: Parameters: HA = +00:58:59.8 Start = 10:52:29.0 LST = 10:52:08.2 diff = 20.8 secs 2008-Apr-28 20:49:45 INFO2 fixed_driftmap: Waiting 18.8 seconds for RA 9:53:29 2008-Apr-28 20:49:45 INFO2 lstwait: Waiting for 18.7 secs from LST 10:52:08 to LST 10:52:27 ... 2008-Apr-28 20:49:45 LOG4 send_obs_status: To obs_status: <1> TASKTIME 18.749408852956556 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-28 20:49:45 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-28 20:49:45 LOG5 begin_task: Level: (3) ID = <10303> Status = 0 0 0 0 ok 2008-Apr-28 20:49:45 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_041" 2008-Apr-28 20:49:45 LOG4 got_cormsg: From DATATAKING: set ra 110.53 2008-Apr-28 20:49:45 LOG4 got_cormsg: From DATATAKING: set dec 14.5087750819 2008-Apr-28 20:49:45 LOG4 got_cormsg: From DATATAKING: vw% 110.53 2008-Apr-28 20:49:45 LOG4 got_cormsg: From DATATAKING: vw% 14.5087750819 2008-Apr-28 20:49:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 20:49:45 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-28 20:49:45 LOG4 got_cormsg: From DATATAKING: pnt tr 110.53 14.5087750819 -CF 2008-Apr-28 20:49:45 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-28 20:49:45 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-28 20:49:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 20:49:50 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.879 and 1.119 2008-Apr-28 20:50:03 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-28 20:50:03 LOG5 end_task: Level: (3) ID = <10303> Status = 0 0 0 0 ok 2008-Apr-28 20:50:03 LOG4 lstwait: Finished waiting, the gui caused difference: 0.25405759999443944 2008-Apr-28 20:50:03 INFO3 lstwait: Finished waiting 2008-Apr-28 20:50:03 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-28 20:50:03 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-28 20:50:03 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-28 20:50:03 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-28 20:50:04 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-28 20:50:04 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-28 20:50:04 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-28 20:50:04 LOG5 begin_task: Level: (3) ID = <10304> Status = 0 0 0 0 ok 2008-Apr-28 20:50:04 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-28 20:50:04 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-28 20:50:04 INFO2 take_spectra: Starting WAPP scan: 811900106 2008-Apr-28 20:50:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-28 20:50:04 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-28 20:50:04 LOG5 begin_task: Level: (4) ID = <10305> Status = 0 0 0 0 ok 2008-Apr-28 20:50:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-28 20:50:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3005.00 2008-Apr-28 20:50:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.112825 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-28 20:50:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.112825 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 20:50:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.112825 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 20:50:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.112825 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 20:50:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.112825 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 20:50:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.112825 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-28 20:50:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.112825 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-28 20:50:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.112825 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-28 20:50:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.112825 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-28 21:02:04 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 21:02:04.299 (seconds: 75724.299)!} 2008-Apr-28 21:02:04 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 21:02:04.299 (seconds: 75724.299)! 2008-Apr-28 21:02:05 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 75723.0 to 75724.0! 2008-Apr-28 21:02:06 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (75723.0 - 75725.0)! 2008-Apr-28 21:10:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-28 21:10:05 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-28 21:10:05 LOG5 end_task: Level: (4) ID = <10305> Status = 0 0 0 0 ok 2008-Apr-28 21:10:05 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-28 21:10:05 LOG5 end_task: Level: (3) ID = <10304> Status = 0 0 0 0 ok 2008-Apr-28 21:10:05 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-28 21:10:05 LOG5 finish_task: Level: (2) ID = <10272> Status = 0 0 0 0 ok 2008-Apr-28 21:10:05 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-28 21:10:05 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-28 21:10:05 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-28 21:10:05 LOG5 end_task: Level: (2) ID = <10272> Status = 0 0 0 0 ok 2008-Apr-28 21:10:05 COMMAND run_command_line: EXECUTING command 31: 'FIXEDDRIFT az=311.91 alfaangle=60.2 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_048 ra=120900.00 dec=74930.00' 2008-Apr-28 21:10:05 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-28 21:10:06 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-28 21:10:06 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 311.91 60.2 hcorcal 5 tracking no first 1 AGESVC1A_p2_048 120900.00 74930.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-28 21:10:06 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-28 21:10:06 LOG5 begin_task: Level: (2) ID = <10306> Status = 0 0 0 0 ok 2008-Apr-28 21:10:06 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES3193_p2_041' 2008-Apr-28 21:10:06 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-28 21:10:06 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1A_p2_048} 2008-Apr-28 21:10:06 INFO3 fixed_driftmap: Sending telescope to Az = 311.91 and ZA = 15.39 2008-Apr-28 21:10:06 LOG3 track_source: Calling 'track_source AGESVC1A_p2_048 311.91 15.3928577037 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-28 21:10:06 START begin_task: Starting task 'sending tracking commands' 2008-Apr-28 21:10:06 LOG5 begin_task: Level: (3) ID = <10307> Status = 0 0 0 0 ok 2008-Apr-28 21:10:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_048} INFO {Slewing to source 'AGESVC1A_p2_048' ...} 2008-Apr-28 21:10:06 INFO1 track_source: Starting to track AGESVC1A_p2_048 2008-Apr-28 21:10:06 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_048" 2008-Apr-28 21:10:06 LOG3 vw_send: To DATATAKING: set ra 311.91 2008-Apr-28 21:10:06 LOG3 vw_send: To DATATAKING: set dec 15.3928577037 2008-Apr-28 21:10:06 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-28 21:10:06 LOG3 vw_send: To DATATAKING: pnt tr 311.91 15.3928577037 -CF 2008-Apr-28 21:10:06 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-28 21:10:06 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-28 21:10:06 LOG5 finish_task: Level: (3) ID = <10307> Status = 0 0 0 0 ok 2008-Apr-28 21:10:06 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-28 21:10:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 21:10:06 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-28 21:10:06 LOG5 end_task: Level: (3) ID = <10307> Status = 0 0 0 0 ok 2008-Apr-28 21:10:06 START begin_task: Starting task 'rotate ALFA to +60.2 degrees' 2008-Apr-28 21:10:06 LOG5 begin_task: Level: (3) ID = <10308> Status = 0 0 0 0 ok 2008-Apr-28 21:10:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +60.2 degrees ...} 2008-Apr-28 21:10:06 INFO2 rotate_alfa: ALFA commanded to +60.2 degrees 2008-Apr-28 21:10:06 LOG3 sock_errsend: To ALFAMOTOR: POSITION 60.2 REPLY 2008-Apr-28 21:10:06 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-28 21:10:06 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-28 21:10:06 LOG5 begin_task: Level: (4) ID = <10309> Status = 0 0 0 0 ok 2008-Apr-28 21:10:06 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_048" 2008-Apr-28 21:10:06 LOG4 got_cormsg: From DATATAKING: set ra 311.91 2008-Apr-28 21:10:06 LOG4 got_cormsg: From DATATAKING: set dec 15.3928577037 2008-Apr-28 21:10:06 LOG4 got_cormsg: From DATATAKING: vw% 311.91 2008-Apr-28 21:10:06 LOG4 got_cormsg: From DATATAKING: vw% 15.3928577037 2008-Apr-28 21:10:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 21:10:06 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-28 21:10:06 LOG4 got_cormsg: From DATATAKING: pnt tr 311.91 15.3928577037 -CF 2008-Apr-28 21:10:06 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-28 21:10:06 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-28 21:10:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 21:11:29 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-28 21:11:29 INFO3 alfa_motor: ALFA rotator in-position +60.20 degrees 2008-Apr-28 21:11:29 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-28 21:11:29 LOG5 end_task: Level: (4) ID = <10309> Status = 0 0 0 0 ok 2008-Apr-28 21:11:29 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-28 21:11:29 STOP finish_task: Finishing task 'rotate ALFA to +60.2 degrees' 2008-Apr-28 21:11:29 LOG5 finish_task: Level: (3) ID = <10308> Status = 0 0 0 0 ok 2008-Apr-28 21:11:29 INFO2 finish_task: DONE finished configuration: rotating ALFA to +60.2 degrees 2008-Apr-28 21:11:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 21:11:29 STOP end_task: Finishing task 'rotate ALFA to +60.2 degrees' with status 'OK' 2008-Apr-28 21:11:29 LOG5 end_task: Level: (3) ID = <10308> Status = 0 0 0 0 ok 2008-Apr-28 21:11:29 START begin_task: Starting task 'waiting on telescope' 2008-Apr-28 21:11:29 LOG5 begin_task: Level: (3) ID = <10310> Status = 0 0 0 0 ok 2008-Apr-28 21:11:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-28 21:11:29 LOG3 waittrk: Start waittrk 5 2008-Apr-28 21:11:29 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-28 21:11:29 LOG5 begin_task: Level: (4) ID = <10311> Status = 0 0 0 0 ok 2008-Apr-28 21:11:34 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-28 21:11:34 LOG5 end_task: Level: (4) ID = <10311> Status = 0 0 0 0 ok 2008-Apr-28 21:11:34 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-28 21:11:34 LOG5 begin_task: Level: (4) ID = <10312> Status = 0 0 0 0 ok 2008-Apr-28 21:17:03 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 21:17:03.299 (seconds: 76623.299)!} 2008-Apr-28 21:17:03 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 21:17:03.299 (seconds: 76623.299)! 2008-Apr-28 21:18:25 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-28 21:18:25 LOG5 end_task: Level: (4) ID = <10312> Status = 0 0 0 0 ok 2008-Apr-28 21:18:25 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-28 21:18:25 INFO2 waittrk: Now tracking AGESVC1A_p2_048 2008-Apr-28 21:18:25 LOG4 waittrk: Current telescope position: Az = 311.53 ZA = 15.39 2008-Apr-28 21:18:25 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-28 21:18:25 LOG5 finish_task: Level: (3) ID = <10310> Status = 0 0 0 0 ok 2008-Apr-28 21:18:25 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-28 21:18:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 21:18:25 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-28 21:18:25 LOG5 end_task: Level: (3) ID = <10310> Status = 0 0 0 0 ok 2008-Apr-28 21:18:25 START begin_task: Starting task 'selecting calibration type' 2008-Apr-28 21:18:25 LOG5 begin_task: Level: (3) ID = <10313> Status = 0 0 0 0 ok 2008-Apr-28 21:18:25 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-28 21:18:25 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-28 21:18:25 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 21:18:25 START begin_task: Starting task 'waiting on setcal' 2008-Apr-28 21:18:25 LOG5 begin_task: Level: (4) ID = <10314> Status = 0 0 0 0 ok 2008-Apr-28 21:18:25 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-28 21:18:25 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 21:18:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 21:18:26 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-28 21:18:26 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-28 21:18:26 LOG5 end_task: Level: (4) ID = <10314> Status = 0 0 0 0 ok 2008-Apr-28 21:18:26 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-28 21:18:26 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-28 21:18:26 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-28 21:18:26 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-28 21:18:26 LOG5 begin_task: Level: (4) ID = <10315> Status = 0 0 0 0 ok 2008-Apr-28 21:18:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 21:18:26 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-28 21:18:26 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-28 21:18:26 LOG5 end_task: Level: (4) ID = <10315> Status = 0 0 0 0 ok 2008-Apr-28 21:18:27 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-28 21:18:27 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-28 21:18:27 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-28 21:18:27 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-28 21:18:27 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-28 21:18:27 LOG5 begin_task: Level: (4) ID = <10316> Status = 0 0 0 0 ok 2008-Apr-28 21:18:27 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-28 21:18:27 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-28 21:18:27 LOG5 end_task: Level: (4) ID = <10316> Status = 0 0 0 0 ok 2008-Apr-28 21:18:27 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-28 21:18:27 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-28 21:18:27 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-28 21:18:27 LOG5 finish_task: Level: (3) ID = <10313> Status = 0 0 0 0 ok 2008-Apr-28 21:18:27 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-28 21:18:27 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 21:18:27 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-28 21:18:27 LOG5 end_task: Level: (3) ID = <10313> Status = 0 0 0 0 ok 2008-Apr-28 21:18:27 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2008-Apr-28 21:18:27 INFO2 astwait: Waiting for 91 seconds from 01:18:27 to 01:19:58 UTC ... 2008-Apr-28 21:18:27 LOG4 send_obs_status: To obs_status: <1> TASKTIME 91 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-28 21:18:27 START begin_task: Starting task 'waiting on waiting for AST time' 2008-Apr-28 21:18:27 LOG5 begin_task: Level: (3) ID = <10317> Status = 0 0 0 0 ok 2008-Apr-28 21:19:58 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2008-Apr-28 21:19:58 LOG5 end_task: Level: (3) ID = <10317> Status = 0 0 0 0 ok 2008-Apr-28 21:19:58 INFO3 astwait: Finished waiting 2008-Apr-28 21:19:58 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-28 21:19:58 LOG5 dopset_later: Calling 'dopset_later 60.786227158210743' 2008-Apr-28 21:19:58 INFO3 dopset_later: Setting Doppler correction for 21:20:58 (60.8 seconds from now) 2008-Apr-28 21:19:58 LOG5 antvel: Calling 'antvel 311.910000 15.392858 F 60.786227158210743' 2008-Apr-28 21:19:58 LOG2 antvel: Parameters to Doppler: Heliocentric 91258 2008 119 0.0 2008-Apr-28 21:19:58 INFO5 antvel: Computed antenna velocity: +18.40690 km/s 2008-Apr-28 21:19:58 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=18.406901062999999 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-28 21:19:58 INFO4 dopset_gen: New sky frequencies: 1381.158627 1381.158627 1381.158627 1381.158627 1381.158627 1381.158627 1381.158627 1381.158627 1381.158627 2008-Apr-28 21:19:58 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.158627 sky0=1381.158627 sky1=1381.158627 sky2=1381.158627 sky3=1381.158627 sky4=1381.158627 sky5=1381.158627 sky6=1381.158627 sky7=1381.158627 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-28 21:19:58 LOG2 dopset_gen: Result from 'sky2syn': 1631.158627 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-28 21:19:58 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631158627.0} 2008-Apr-28 21:19:58 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 21:19:58 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-28 21:19:58 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-28 21:19:58 INFO5 fixed_driftmap: Tracking J2000 position: RA = 12:08:03.7 Dec = +07:49:21.7 2008-Apr-28 21:19:58 LOG3 track_source: Calling 'track_source AGESVC1A_p2_048 120803.7 074921.7 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-28 21:19:58 START begin_task: Starting task 'sending tracking commands' 2008-Apr-28 21:19:58 LOG5 begin_task: Level: (3) ID = <10318> Status = 0 0 0 0 ok 2008-Apr-28 21:19:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_048} INFO {Slewing to source 'AGESVC1A_p2_048' ...} 2008-Apr-28 21:19:58 INFO1 track_source: Starting to track AGESVC1A_p2_048 2008-Apr-28 21:19:58 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_048" 2008-Apr-28 21:19:58 LOG3 vw_send: To DATATAKING: set ra 120803.7 2008-Apr-28 21:19:58 LOG3 vw_send: To DATATAKING: set dec 074921.7 2008-Apr-28 21:19:58 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-28 21:19:58 LOG3 vw_send: To DATATAKING: pnt tr 120803.7 074921.7 -CJ 2008-Apr-28 21:19:58 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-28 21:19:58 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-28 21:19:58 LOG5 finish_task: Level: (3) ID = <10318> Status = 0 0 0 0 ok 2008-Apr-28 21:19:58 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-28 21:19:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 21:19:58 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-28 21:19:58 LOG5 end_task: Level: (3) ID = <10318> Status = 0 0 0 0 ok 2008-Apr-28 21:19:58 START begin_task: Starting task 'waiting on telescope' 2008-Apr-28 21:19:58 LOG5 begin_task: Level: (3) ID = <10319> Status = 0 0 0 0 ok 2008-Apr-28 21:19:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-28 21:19:58 LOG3 waittrk: Start waittrk 5 2008-Apr-28 21:19:58 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-28 21:19:58 LOG5 begin_task: Level: (4) ID = <10320> Status = 0 0 0 0 ok 2008-Apr-28 21:19:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631158627.0} 2008-Apr-28 21:19:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 21:19:58 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_048" 2008-Apr-28 21:19:58 LOG4 got_cormsg: From DATATAKING: set ra 120803.7 2008-Apr-28 21:19:58 LOG4 got_cormsg: From DATATAKING: set dec 074921.7 2008-Apr-28 21:19:58 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-28 21:19:58 LOG4 got_cormsg: From DATATAKING: vw% 120803.7 2008-Apr-28 21:19:58 LOG4 got_cormsg: From DATATAKING: vw% 074921.7 2008-Apr-28 21:19:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 21:19:58 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-28 21:19:58 LOG4 got_cormsg: From DATATAKING: pnt tr 120803.7 074921.7 -CJ 2008-Apr-28 21:19:58 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-28 21:19:58 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-28 21:19:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 21:20:03 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-28 21:20:03 LOG5 end_task: Level: (4) ID = <10320> Status = 0 0 0 0 ok 2008-Apr-28 21:20:03 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-28 21:20:03 LOG5 begin_task: Level: (4) ID = <10321> Status = 0 0 0 0 ok 2008-Apr-28 21:20:05 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-28 21:20:05 LOG5 end_task: Level: (4) ID = <10321> Status = 0 0 0 0 ok 2008-Apr-28 21:20:05 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-28 21:20:05 INFO2 waittrk: Now tracking AGESVC1A_p2_048 2008-Apr-28 21:20:05 LOG4 waittrk: Current telescope position: Az = 311.58 ZA = 15.38 2008-Apr-28 21:20:05 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-28 21:20:05 LOG5 finish_task: Level: (3) ID = <10319> Status = 0 0 0 0 ok 2008-Apr-28 21:20:05 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-28 21:20:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 21:20:05 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-28 21:20:05 LOG5 end_task: Level: (3) ID = <10319> Status = 0 0 0 0 ok 2008-Apr-28 21:20:05 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-28 21:20:05 LOG5 begin_task: Level: (3) ID = <10322> Status = 0 0 0 0 ok 2008-Apr-28 21:20:05 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-28 21:20:05 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-28 21:20:05 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-28 21:20:05 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-28 21:20:05 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 21:20:05 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-28 21:20:05 LOG5 begin_task: Level: (4) ID = <10323> Status = 0 0 0 0 ok 2008-Apr-28 21:20:05 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-28 21:20:05 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 21:20:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 21:20:06 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-28 21:20:06 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-28 21:20:06 LOG5 end_task: Level: (4) ID = <10323> Status = 0 0 0 0 ok 2008-Apr-28 21:20:06 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-28 21:20:06 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-28 21:20:06 LOG5 begin_task: Level: (4) ID = <10324> Status = 0 0 0 0 ok 2008-Apr-28 21:20:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-28 21:20:06 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-28 21:20:06 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-28 21:20:06 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-28 21:20:06 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-28 21:20:06 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-28 21:20:06 LOG5 begin_task: Level: (5) ID = <10325> Status = 0 0 0 0 ok 2008-Apr-28 21:20:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 21:20:06 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-28 21:20:06 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 1 dB --- beam 1: 7 6 dB 2008-Apr-28 21:20:06 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-28 21:20:06 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 6 dB 2008-Apr-28 21:20:06 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 2 3 dB 2008-Apr-28 21:20:06 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-28 21:20:06 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-28 21:20:06 LOG5 end_task: Level: (5) ID = <10325> Status = 0 0 0 0 ok 2008-Apr-28 21:20:06 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.914 0.995 ALFA beam 1: 1.133 1.096 2008-Apr-28 21:20:06 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.090 0.998 ALFA beam 3: 1.041 1.081 2008-Apr-28 21:20:06 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.971 1.007 ALFA beam 5: 1.058 0.955 2008-Apr-28 21:20:06 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.014 1.045 ALFA beam 7: 1.102 0.930 2008-Apr-28 21:20:06 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-28 21:20:06 LOG5 finish_task: Level: (4) ID = <10324> Status = 0 0 0 0 ok 2008-Apr-28 21:20:06 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-28 21:20:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 21:20:06 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-28 21:20:06 LOG5 end_task: Level: (4) ID = <10324> Status = 0 0 0 0 ok 2008-Apr-28 21:20:06 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-28 21:20:06 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-28 21:20:06 LOG5 finish_task: Level: (3) ID = <10322> Status = 0 0 0 0 ok 2008-Apr-28 21:20:06 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-28 21:20:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 21:20:06 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-28 21:20:06 LOG5 end_task: Level: (3) ID = <10322> Status = 0 0 0 0 ok 2008-Apr-28 21:20:06 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Steve Schnei 2008-Apr-28 21:20:06 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Steve Schnei 2008-Apr-28 21:20:06 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Steve Schnei 2008-Apr-28 21:20:07 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Steve Schnei 2008-Apr-28 21:20:07 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-28 21:20:07 START begin_task: Starting task 'WAPP calibration' 2008-Apr-28 21:20:07 LOG5 begin_task: Level: (3) ID = <10326> Status = 0 0 0 0 ok 2008-Apr-28 21:20:07 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-28 21:20:07 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-28 21:20:07 START begin_task: Starting task 'selecting calibration type' 2008-Apr-28 21:20:07 LOG5 begin_task: Level: (4) ID = <10327> Status = 0 0 0 0 ok 2008-Apr-28 21:20:07 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-28 21:20:07 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-28 21:20:07 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 21:20:07 START begin_task: Starting task 'waiting on setcal' 2008-Apr-28 21:20:07 LOG5 begin_task: Level: (5) ID = <10328> Status = 0 0 0 0 ok 2008-Apr-28 21:20:07 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Steve Schnei' 2008-Apr-28 21:20:07 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-28 21:20:07 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 21:20:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 21:20:07 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-28 21:20:07 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-28 21:20:07 LOG5 end_task: Level: (5) ID = <10328> Status = 0 0 0 0 ok 2008-Apr-28 21:20:07 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-28 21:20:07 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-28 21:20:07 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-28 21:20:07 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-28 21:20:07 LOG5 begin_task: Level: (5) ID = <10329> Status = 0 0 0 0 ok 2008-Apr-28 21:20:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 21:20:07 NOTE WAPPDATA-new_file: New FITS file: wapp.20080428.a2048.0007.fits 2008-Apr-28 21:20:07 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080428.a2048.0007.fits} 2008-Apr-28 21:20:08 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-28 21:20:08 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-28 21:20:08 LOG5 end_task: Level: (5) ID = <10329> Status = 0 0 0 0 ok 2008-Apr-28 21:20:08 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-28 21:20:08 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-28 21:20:08 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-28 21:20:08 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-28 21:20:08 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-28 21:20:08 LOG5 begin_task: Level: (5) ID = <10330> Status = 0 0 0 0 ok 2008-Apr-28 21:20:08 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-28 21:20:08 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-28 21:20:08 LOG5 end_task: Level: (5) ID = <10330> Status = 0 0 0 0 ok 2008-Apr-28 21:20:08 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-28 21:20:08 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-28 21:20:08 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-28 21:20:08 LOG5 finish_task: Level: (4) ID = <10327> Status = 0 0 0 0 ok 2008-Apr-28 21:20:08 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-28 21:20:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 21:20:08 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-28 21:20:08 LOG5 end_task: Level: (4) ID = <10327> Status = 0 0 0 0 ok 2008-Apr-28 21:20:08 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-28 21:20:08 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-28 21:20:08 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-28 21:20:08 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-28 21:20:08 LOG5 begin_task: Level: (4) ID = <10331> Status = 0 0 0 0 ok 2008-Apr-28 21:20:08 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-28 21:20:08 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-28 21:20:08 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-28 21:20:08 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-28 21:20:08 LOG5 end_task: Level: (4) ID = <10331> Status = 0 0 0 0 ok 2008-Apr-28 21:20:08 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-28 21:20:08 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-28 21:20:08 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-28 21:20:08 LOG5 begin_task: Level: (4) ID = <10332> Status = 0 0 0 0 ok 2008-Apr-28 21:20:08 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-28 21:20:08 LOG5 log_alfabeam: Parameters: 12.13436111111111 7.8226944444444433 11.377005 2008.3282381423176 60.199959 2008-Apr-28 21:20:08 LOG4 log_alfabeam: ALFABEAM 0 12.134361111111106 7.822694444444427 2008-Apr-28 21:20:08 LOG4 log_alfabeam: ALFABEAM 1 12.132101099199069 7.920024284218472 2008-Apr-28 21:20:08 LOG4 log_alfabeam: ALFABEAM 2 12.127789025610625 7.855585251523499 2008-Apr-28 21:20:08 LOG4 log_alfabeam: ALFABEAM 3 12.130011695422352 7.758067987934285 2008-Apr-28 21:20:08 LOG4 log_alfabeam: ALFABEAM 4 12.136588204491840 7.725072996368041 2008-Apr-28 21:20:08 LOG4 log_alfabeam: ALFABEAM 5 12.140951123648025 7.790252858227654 2008-Apr-28 21:20:08 LOG4 log_alfabeam: ALFABEAM 6 12.138686665016053 7.887686577650346 2008-Apr-28 21:20:08 INFO2 take_spectra: Starting WAPP scan: 811900107 2008-Apr-28 21:20:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-28 21:20:09 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-28 21:20:09 LOG5 begin_task: Level: (5) ID = <10333> Status = 0 0 0 0 ok 2008-Apr-28 21:20:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-28 21:20:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 4810.00 2008-Apr-28 21:20:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.158627 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-28 21:20:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.158627 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 21:20:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.158627 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 21:20:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.158627 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 21:20:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.158627 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 21:20:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.158627 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-28 21:20:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.158627 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-28 21:20:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.158627 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-28 21:20:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.158627 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-28 21:20:15 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-28 21:20:15 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-28 21:20:15 LOG5 end_task: Level: (5) ID = <10333> Status = 0 0 0 0 ok 2008-Apr-28 21:20:15 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-28 21:20:15 LOG5 end_task: Level: (4) ID = <10332> Status = 0 0 0 0 ok 2008-Apr-28 21:20:15 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-28 21:20:15 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-28 21:20:15 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-28 21:20:15 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-28 21:20:15 LOG5 begin_task: Level: (4) ID = <10334> Status = 0 0 0 0 ok 2008-Apr-28 21:20:15 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-28 21:20:15 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-28 21:20:15 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-28 21:20:15 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-28 21:20:15 LOG5 end_task: Level: (4) ID = <10334> Status = 0 0 0 0 ok 2008-Apr-28 21:20:15 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-28 21:20:15 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-28 21:20:15 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-28 21:20:15 LOG5 begin_task: Level: (4) ID = <10335> Status = 0 0 0 0 ok 2008-Apr-28 21:20:15 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-28 21:20:15 LOG5 log_alfabeam: Parameters: 12.13436111111111 7.8226944444444433 11.378955 2008.3282383641342 60.199959 2008-Apr-28 21:20:15 LOG4 log_alfabeam: ALFABEAM 0 12.134361111111103 7.822694444444448 2008-Apr-28 21:20:15 LOG4 log_alfabeam: ALFABEAM 1 12.132109103036326 7.920065145897744 2008-Apr-28 21:20:15 LOG4 log_alfabeam: ALFABEAM 2 12.127791754421283 7.855705190391391 2008-Apr-28 21:20:15 LOG4 log_alfabeam: ALFABEAM 3 12.130006354310021 7.758147474864002 2008-Apr-28 21:20:15 LOG4 log_alfabeam: ALFABEAM 4 12.136580135209739 7.725032327488848 2008-Apr-28 21:20:15 LOG4 log_alfabeam: ALFABEAM 5 12.140948457172938 7.790133257979876 2008-Apr-28 21:20:15 LOG4 log_alfabeam: ALFABEAM 6 12.138692001621775 7.887608055104268 2008-Apr-28 21:20:15 INFO2 take_spectra: Starting WAPP scan: 811900108 2008-Apr-28 21:20:16 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-28 21:20:16 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-28 21:20:16 LOG5 begin_task: Level: (5) ID = <10336> Status = 0 0 0 0 ok 2008-Apr-28 21:20:16 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-28 21:20:16 INFO1 WAPP=1+2+3+4-start_spectra: start sec 4817.00 2008-Apr-28 21:20:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.548 > 1.4)! 2008-Apr-28 21:20:21 LOG4 check_wapp_levels: WAPP-1 power levels: 1.250 1.260 1.530 1.473 2008-Apr-28 21:20:21 LOG4 check_wapp_levels: WAPP-2 power levels: 1.465 1.356 1.419 1.468 2008-Apr-28 21:20:21 LOG4 check_wapp_levels: WAPP-3 power levels: 1.337 1.381 1.462 1.266 2008-Apr-28 21:20:21 LOG4 check_wapp_levels: WAPP-4 power levels: 1.423 1.451 1.548 1.290 2008-Apr-28 21:20:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.158627 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-28 21:20:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.158627 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 21:20:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.158627 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 21:20:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.158627 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 21:20:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.158627 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 21:20:22 LOG3 WAPP=2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.158627 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-28 21:20:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.158627 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-28 21:20:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.158627 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-28 21:20:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.158627 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-28 21:20:22 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-28 21:20:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-28 21:20:22 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-28 21:20:22 LOG5 end_task: Level: (5) ID = <10336> Status = 0 0 0 0 ok 2008-Apr-28 21:20:22 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-28 21:20:22 LOG5 end_task: Level: (4) ID = <10335> Status = 0 0 0 0 ok 2008-Apr-28 21:20:22 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-28 21:20:22 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-28 21:20:22 LOG5 finish_task: Level: (3) ID = <10326> Status = 0 0 0 0 ok 2008-Apr-28 21:20:22 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-28 21:20:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 21:20:22 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-28 21:20:22 LOG5 end_task: Level: (3) ID = <10326> Status = 0 0 0 0 ok 2008-Apr-28 21:20:22 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-28 21:20:22 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 311.91 and ZA = 15.39 2008-Apr-28 21:20:22 LOG3 track_source: Calling 'track_source AGESVC1A_p2_048 311.91 15.3928577037 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-28 21:20:22 START begin_task: Starting task 'sending tracking commands' 2008-Apr-28 21:20:22 LOG5 begin_task: Level: (3) ID = <10337> Status = 0 0 0 0 ok 2008-Apr-28 21:20:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_048} INFO {Slewing to source 'AGESVC1A_p2_048' ...} 2008-Apr-28 21:20:22 INFO1 track_source: Starting to track AGESVC1A_p2_048 2008-Apr-28 21:20:22 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_048" 2008-Apr-28 21:20:22 LOG3 vw_send: To DATATAKING: set ra 311.91 2008-Apr-28 21:20:22 LOG3 vw_send: To DATATAKING: set dec 15.3928577037 2008-Apr-28 21:20:22 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-28 21:20:22 LOG3 vw_send: To DATATAKING: pnt tr 311.91 15.3928577037 -CF 2008-Apr-28 21:20:22 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-28 21:20:22 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-28 21:20:22 LOG5 finish_task: Level: (3) ID = <10337> Status = 0 0 0 0 ok 2008-Apr-28 21:20:22 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-28 21:20:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 21:20:23 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-28 21:20:23 LOG5 end_task: Level: (3) ID = <10337> Status = 0 0 0 0 ok 2008-Apr-28 21:20:23 LOG1 fixed_driftmap: Parameters: HA = -00:46:00.0 Start = 11:23:27.1 LST = 11:22:51.3 diff = 35.9 secs 2008-Apr-28 21:20:23 INFO2 fixed_driftmap: Waiting 33.9 seconds for RA 12:09:27 2008-Apr-28 21:20:23 INFO2 lstwait: Waiting for 33.8 secs from LST 11:22:51 to LST 11:23:25 ... 2008-Apr-28 21:20:23 LOG4 send_obs_status: To obs_status: <1> TASKTIME 33.789740178370536 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-28 21:20:23 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-28 21:20:23 LOG5 begin_task: Level: (3) ID = <10338> Status = 0 0 0 0 ok 2008-Apr-28 21:20:23 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_048" 2008-Apr-28 21:20:23 LOG3 WAPP=1-save_rfcalc: Channel 5: Sky freq = 1381.158627 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-28 21:20:23 LOG4 got_cormsg: From DATATAKING: set ra 311.91 2008-Apr-28 21:20:23 LOG4 got_cormsg: From DATATAKING: set dec 15.3928577037 2008-Apr-28 21:20:23 LOG4 got_cormsg: From DATATAKING: vw% 311.91 2008-Apr-28 21:20:23 LOG4 got_cormsg: From DATATAKING: vw% 15.3928577037 2008-Apr-28 21:20:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 21:20:23 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-28 21:20:23 LOG4 got_cormsg: From DATATAKING: pnt tr 311.91 15.3928577037 -CF 2008-Apr-28 21:20:23 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-28 21:20:23 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-28 21:20:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 21:20:27 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.913 and 1.137 2008-Apr-28 21:20:56 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-28 21:20:56 LOG5 end_task: Level: (3) ID = <10338> Status = 0 0 0 0 ok 2008-Apr-28 21:20:56 LOG4 lstwait: Finished waiting, the gui caused difference: 0.20974772000528219 2008-Apr-28 21:20:56 INFO3 lstwait: Finished waiting 2008-Apr-28 21:20:56 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-28 21:20:56 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-28 21:20:56 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-28 21:20:57 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-28 21:20:57 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-28 21:20:57 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-28 21:20:57 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-28 21:20:57 LOG5 begin_task: Level: (3) ID = <10339> Status = 0 0 0 0 ok 2008-Apr-28 21:20:57 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-28 21:20:57 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-28 21:20:57 INFO2 take_spectra: Starting WAPP scan: 811900109 2008-Apr-28 21:20:57 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-28 21:20:57 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-28 21:20:57 LOG5 begin_task: Level: (4) ID = <10340> Status = 0 0 0 0 ok 2008-Apr-28 21:20:57 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-28 21:20:57 INFO1 WAPP=1+2+3+4-start_spectra: start sec 4858.00 2008-Apr-28 21:20:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.158627 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-28 21:20:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.158627 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 21:20:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.158627 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 21:20:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.158627 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 21:20:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.158627 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 21:20:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.158627 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-28 21:20:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.158627 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-28 21:20:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.158627 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-28 21:20:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.158627 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-28 21:40:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-28 21:40:58 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-28 21:40:58 LOG5 end_task: Level: (4) ID = <10340> Status = 0 0 0 0 ok 2008-Apr-28 21:40:58 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-28 21:40:58 LOG5 end_task: Level: (3) ID = <10339> Status = 0 0 0 0 ok 2008-Apr-28 21:40:58 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-28 21:40:58 LOG5 finish_task: Level: (2) ID = <10306> Status = 0 0 0 0 ok 2008-Apr-28 21:40:58 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-28 21:40:58 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-28 21:40:58 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-28 21:40:58 LOG5 end_task: Level: (2) ID = <10306> Status = 0 0 0 0 ok 2008-Apr-28 21:40:58 COMMAND run_command_line: EXECUTING command 35: 'FIXEDDRIFT az=331.50 alfaangle=42.9 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_050 ra=120900.00 dec=74630.00' 2008-Apr-28 21:40:58 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-28 21:40:59 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-28 21:40:59 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 331.50 42.9 hcorcal 5 tracking no first 1 AGESVC1A_p2_050 120900.00 74630.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-28 21:40:59 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-28 21:40:59 LOG5 begin_task: Level: (2) ID = <10341> Status = 0 0 0 0 ok 2008-Apr-28 21:40:59 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGESVC1A_p2_048' 2008-Apr-28 21:40:59 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-28 21:40:59 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1A_p2_050} 2008-Apr-28 21:40:59 INFO3 fixed_driftmap: Sending telescope to Az = 331.50 and ZA = 12.01 2008-Apr-28 21:40:59 LOG3 track_source: Calling 'track_source AGESVC1A_p2_050 331.50 12.0090671185 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-28 21:40:59 START begin_task: Starting task 'sending tracking commands' 2008-Apr-28 21:40:59 LOG5 begin_task: Level: (3) ID = <10342> Status = 0 0 0 0 ok 2008-Apr-28 21:40:59 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_050} INFO {Slewing to source 'AGESVC1A_p2_050' ...} 2008-Apr-28 21:40:59 INFO1 track_source: Starting to track AGESVC1A_p2_050 2008-Apr-28 21:40:59 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_050" 2008-Apr-28 21:40:59 LOG3 vw_send: To DATATAKING: set ra 331.50 2008-Apr-28 21:40:59 LOG3 vw_send: To DATATAKING: set dec 12.0090671185 2008-Apr-28 21:40:59 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-28 21:40:59 LOG3 vw_send: To DATATAKING: pnt tr 331.50 12.0090671185 -CF 2008-Apr-28 21:40:59 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-28 21:40:59 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-28 21:40:59 LOG5 finish_task: Level: (3) ID = <10342> Status = 0 0 0 0 ok 2008-Apr-28 21:40:59 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-28 21:40:59 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 21:40:59 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-28 21:40:59 LOG5 end_task: Level: (3) ID = <10342> Status = 0 0 0 0 ok 2008-Apr-28 21:40:59 START begin_task: Starting task 'rotate ALFA to +42.9 degrees' 2008-Apr-28 21:40:59 LOG5 begin_task: Level: (3) ID = <10343> Status = 0 0 0 0 ok 2008-Apr-28 21:40:59 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +42.9 degrees ...} 2008-Apr-28 21:40:59 INFO2 rotate_alfa: ALFA commanded to +42.9 degrees 2008-Apr-28 21:40:59 LOG3 sock_errsend: To ALFAMOTOR: POSITION 42.9 REPLY 2008-Apr-28 21:40:59 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-28 21:40:59 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-28 21:40:59 LOG5 begin_task: Level: (4) ID = <10344> Status = 0 0 0 0 ok 2008-Apr-28 21:40:59 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_050" 2008-Apr-28 21:40:59 LOG4 got_cormsg: From DATATAKING: set ra 331.50 2008-Apr-28 21:40:59 LOG4 got_cormsg: From DATATAKING: set dec 12.0090671185 2008-Apr-28 21:40:59 LOG4 got_cormsg: From DATATAKING: vw% 331.50 2008-Apr-28 21:40:59 LOG4 got_cormsg: From DATATAKING: vw% 12.0090671185 2008-Apr-28 21:40:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 21:40:59 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-28 21:40:59 LOG4 got_cormsg: From DATATAKING: pnt tr 331.50 12.0090671185 -CF 2008-Apr-28 21:40:59 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-28 21:40:59 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-28 21:40:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 21:41:10 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-28 21:41:10 INFO3 alfa_motor: ALFA rotator in-position +42.90 degrees 2008-Apr-28 21:41:10 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-28 21:41:10 LOG5 end_task: Level: (4) ID = <10344> Status = 0 0 0 0 ok 2008-Apr-28 21:41:10 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-28 21:41:10 STOP finish_task: Finishing task 'rotate ALFA to +42.9 degrees' 2008-Apr-28 21:41:10 LOG5 finish_task: Level: (3) ID = <10343> Status = 0 0 0 0 ok 2008-Apr-28 21:41:10 INFO2 finish_task: DONE finished configuration: rotating ALFA to +42.9 degrees 2008-Apr-28 21:41:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 21:41:10 STOP end_task: Finishing task 'rotate ALFA to +42.9 degrees' with status 'OK' 2008-Apr-28 21:41:10 LOG5 end_task: Level: (3) ID = <10343> Status = 0 0 0 0 ok 2008-Apr-28 21:41:10 START begin_task: Starting task 'waiting on telescope' 2008-Apr-28 21:41:10 LOG5 begin_task: Level: (3) ID = <10345> Status = 0 0 0 0 ok 2008-Apr-28 21:41:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-28 21:41:10 LOG3 waittrk: Start waittrk 5 2008-Apr-28 21:41:10 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-28 21:41:10 LOG5 begin_task: Level: (4) ID = <10346> Status = 0 0 0 0 ok 2008-Apr-28 21:41:15 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-28 21:41:15 LOG5 end_task: Level: (4) ID = <10346> Status = 0 0 0 0 ok 2008-Apr-28 21:41:15 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-28 21:41:15 LOG5 begin_task: Level: (4) ID = <10347> Status = 0 0 0 0 ok 2008-Apr-28 21:42:30 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-28 21:42:30 LOG5 end_task: Level: (4) ID = <10347> Status = 0 0 0 0 ok 2008-Apr-28 21:42:30 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-28 21:42:30 INFO2 waittrk: Now tracking AGESVC1A_p2_050 2008-Apr-28 21:42:30 LOG4 waittrk: Current telescope position: Az = 331.12 ZA = 11.99 2008-Apr-28 21:42:30 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-28 21:42:30 LOG5 finish_task: Level: (3) ID = <10345> Status = 0 0 0 0 ok 2008-Apr-28 21:42:30 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-28 21:42:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 21:42:30 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-28 21:42:30 LOG5 end_task: Level: (3) ID = <10345> Status = 0 0 0 0 ok 2008-Apr-28 21:42:30 START begin_task: Starting task 'selecting calibration type' 2008-Apr-28 21:42:30 LOG5 begin_task: Level: (3) ID = <10348> Status = 0 0 0 0 ok 2008-Apr-28 21:42:30 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-28 21:42:30 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-28 21:42:30 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 21:42:30 START begin_task: Starting task 'waiting on setcal' 2008-Apr-28 21:42:30 LOG5 begin_task: Level: (4) ID = <10349> Status = 0 0 0 0 ok 2008-Apr-28 21:42:31 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-28 21:42:31 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 21:42:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 21:42:31 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-28 21:42:31 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-28 21:42:31 LOG5 end_task: Level: (4) ID = <10349> Status = 0 0 0 0 ok 2008-Apr-28 21:42:31 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-28 21:42:31 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-28 21:42:31 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-28 21:42:31 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-28 21:42:31 LOG5 begin_task: Level: (4) ID = <10350> Status = 0 0 0 0 ok 2008-Apr-28 21:42:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 21:42:31 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-28 21:42:31 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-28 21:42:31 LOG5 end_task: Level: (4) ID = <10350> Status = 0 0 0 0 ok 2008-Apr-28 21:42:31 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-28 21:42:31 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-28 21:42:31 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-28 21:42:32 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-28 21:42:32 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-28 21:42:32 LOG5 begin_task: Level: (4) ID = <10351> Status = 0 0 0 0 ok 2008-Apr-28 21:42:32 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-28 21:42:32 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-28 21:42:32 LOG5 end_task: Level: (4) ID = <10351> Status = 0 0 0 0 ok 2008-Apr-28 21:42:32 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-28 21:42:32 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-28 21:42:32 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-28 21:42:32 LOG5 finish_task: Level: (3) ID = <10348> Status = 0 0 0 0 ok 2008-Apr-28 21:42:32 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-28 21:42:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 21:42:32 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-28 21:42:32 LOG5 end_task: Level: (3) ID = <10348> Status = 0 0 0 0 ok 2008-Apr-28 21:42:32 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2008-Apr-28 21:42:32 INFO2 astwait: Waiting for 22 seconds from 01:42:32 to 01:42:54 UTC ... 2008-Apr-28 21:42:32 LOG4 send_obs_status: To obs_status: <1> TASKTIME 22 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-28 21:42:32 START begin_task: Starting task 'waiting on waiting for AST time' 2008-Apr-28 21:42:32 LOG5 begin_task: Level: (3) ID = <10352> Status = 0 0 0 0 ok 2008-Apr-28 21:42:54 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2008-Apr-28 21:42:54 LOG5 end_task: Level: (3) ID = <10352> Status = 0 0 0 0 ok 2008-Apr-28 21:42:54 INFO3 astwait: Finished waiting 2008-Apr-28 21:42:54 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-28 21:42:54 LOG5 dopset_later: Calling 'dopset_later 61.008077798780107' 2008-Apr-28 21:42:54 INFO3 dopset_later: Setting Doppler correction for 21:43:54 (61 seconds from now) 2008-Apr-28 21:42:54 LOG5 antvel: Calling 'antvel 331.500000 12.009067 F 61.008077798780107' 2008-Apr-28 21:42:54 LOG2 antvel: Parameters to Doppler: Heliocentric 92634 2008 119 0.0 2008-Apr-28 21:42:54 INFO5 antvel: Computed antenna velocity: +18.45047 km/s 2008-Apr-28 21:42:54 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=18.450474707400002 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-28 21:42:54 INFO4 dopset_gen: New sky frequencies: 1381.158426 1381.158426 1381.158426 1381.158426 1381.158426 1381.158426 1381.158426 1381.158426 1381.158426 2008-Apr-28 21:42:54 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.158426 sky0=1381.158426 sky1=1381.158426 sky2=1381.158426 sky3=1381.158426 sky4=1381.158426 sky5=1381.158426 sky6=1381.158426 sky7=1381.158426 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-28 21:42:54 LOG2 dopset_gen: Result from 'sky2syn': 1631.158426 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-28 21:42:54 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631158426.0} 2008-Apr-28 21:42:54 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 21:42:54 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-28 21:42:54 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-28 21:42:54 INFO5 fixed_driftmap: Tracking J2000 position: RA = 12:08:03.4 Dec = +07:46:21.7 2008-Apr-28 21:42:54 LOG3 track_source: Calling 'track_source AGESVC1A_p2_050 120803.4 074621.7 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-28 21:42:54 START begin_task: Starting task 'sending tracking commands' 2008-Apr-28 21:42:54 LOG5 begin_task: Level: (3) ID = <10353> Status = 0 0 0 0 ok 2008-Apr-28 21:42:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_050} INFO {Slewing to source 'AGESVC1A_p2_050' ...} 2008-Apr-28 21:42:54 INFO1 track_source: Starting to track AGESVC1A_p2_050 2008-Apr-28 21:42:54 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_050" 2008-Apr-28 21:42:54 LOG3 vw_send: To DATATAKING: set ra 120803.4 2008-Apr-28 21:42:54 LOG3 vw_send: To DATATAKING: set dec 074621.7 2008-Apr-28 21:42:54 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-28 21:42:54 LOG3 vw_send: To DATATAKING: pnt tr 120803.4 074621.7 -CJ 2008-Apr-28 21:42:54 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-28 21:42:54 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-28 21:42:54 LOG5 finish_task: Level: (3) ID = <10353> Status = 0 0 0 0 ok 2008-Apr-28 21:42:54 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-28 21:42:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 21:42:54 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-28 21:42:54 LOG5 end_task: Level: (3) ID = <10353> Status = 0 0 0 0 ok 2008-Apr-28 21:42:54 START begin_task: Starting task 'waiting on telescope' 2008-Apr-28 21:42:54 LOG5 begin_task: Level: (3) ID = <10354> Status = 0 0 0 0 ok 2008-Apr-28 21:42:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-28 21:42:54 LOG3 waittrk: Start waittrk 5 2008-Apr-28 21:42:54 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-28 21:42:54 LOG5 begin_task: Level: (4) ID = <10355> Status = 0 0 0 0 ok 2008-Apr-28 21:42:54 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631158426.0} 2008-Apr-28 21:42:54 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 21:42:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 21:42:54 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_050" 2008-Apr-28 21:42:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 21:42:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 21:42:54 LOG4 got_cormsg: From DATATAKING: set ra 120803.4 2008-Apr-28 21:42:54 LOG4 got_cormsg: From DATATAKING: set dec 074621.7 2008-Apr-28 21:42:54 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-28 21:42:54 LOG4 got_cormsg: From DATATAKING: pnt tr 120803.4 074621.7 -CJ 2008-Apr-28 21:42:54 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-28 21:42:54 LOG4 got_cormsg: From DATATAKING: 120803.4 2008-Apr-28 21:42:54 LOG4 got_cormsg: From DATATAKING: vw% 074621.7 2008-Apr-28 21:42:54 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2008-Apr-28 21:42:59 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-28 21:42:59 LOG5 end_task: Level: (4) ID = <10355> Status = 0 0 0 0 ok 2008-Apr-28 21:42:59 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-28 21:42:59 LOG5 begin_task: Level: (4) ID = <10356> Status = 0 0 0 0 ok 2008-Apr-28 21:43:01 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-28 21:43:01 LOG5 end_task: Level: (4) ID = <10356> Status = 0 0 0 0 ok 2008-Apr-28 21:43:01 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-28 21:43:01 INFO2 waittrk: Now tracking AGESVC1A_p2_050 2008-Apr-28 21:43:01 LOG4 waittrk: Current telescope position: Az = 331.19 ZA = 11.98 2008-Apr-28 21:43:01 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-28 21:43:01 LOG5 finish_task: Level: (3) ID = <10354> Status = 0 0 0 0 ok 2008-Apr-28 21:43:01 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-28 21:43:01 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 21:43:01 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-28 21:43:01 LOG5 end_task: Level: (3) ID = <10354> Status = 0 0 0 0 ok 2008-Apr-28 21:43:01 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-28 21:43:01 LOG5 begin_task: Level: (3) ID = <10357> Status = 0 0 0 0 ok 2008-Apr-28 21:43:01 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-28 21:43:01 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-28 21:43:01 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-28 21:43:01 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-28 21:43:01 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 21:43:01 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-28 21:43:01 LOG5 begin_task: Level: (4) ID = <10358> Status = 0 0 0 0 ok 2008-Apr-28 21:43:02 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-28 21:43:02 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 21:43:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 21:43:02 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-28 21:43:02 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-28 21:43:02 LOG5 end_task: Level: (4) ID = <10358> Status = 0 0 0 0 ok 2008-Apr-28 21:43:02 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-28 21:43:02 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-28 21:43:02 LOG5 begin_task: Level: (4) ID = <10359> Status = 0 0 0 0 ok 2008-Apr-28 21:43:02 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-28 21:43:02 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-28 21:43:02 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-28 21:43:02 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-28 21:43:02 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-28 21:43:02 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-28 21:43:02 LOG5 begin_task: Level: (5) ID = <10360> Status = 0 0 0 0 ok 2008-Apr-28 21:43:02 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-28 21:43:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 21:43:02 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 1 dB --- beam 1: 8 6 dB 2008-Apr-28 21:43:02 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-28 21:43:02 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 6 dB 2008-Apr-28 21:43:02 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 2 3 dB 2008-Apr-28 21:43:02 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-28 21:43:02 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-28 21:43:02 LOG5 end_task: Level: (5) ID = <10360> Status = 0 0 0 0 ok 2008-Apr-28 21:43:02 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.113 0.966 ALFA beam 1: 0.872 1.079 2008-Apr-28 21:43:02 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.044 0.955 ALFA beam 3: 0.987 1.043 2008-Apr-28 21:43:02 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.915 0.956 ALFA beam 5: 1.002 0.908 2008-Apr-28 21:43:02 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.996 1.016 ALFA beam 7: 1.084 0.904 2008-Apr-28 21:43:02 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-28 21:43:02 LOG5 finish_task: Level: (4) ID = <10359> Status = 0 0 0 0 ok 2008-Apr-28 21:43:02 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-28 21:43:02 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 21:43:02 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-28 21:43:02 LOG5 end_task: Level: (4) ID = <10359> Status = 0 0 0 0 ok 2008-Apr-28 21:43:02 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-28 21:43:02 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-28 21:43:02 LOG5 finish_task: Level: (3) ID = <10357> Status = 0 0 0 0 ok 2008-Apr-28 21:43:02 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-28 21:43:02 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 21:43:02 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-28 21:43:02 LOG5 end_task: Level: (3) ID = <10357> Status = 0 0 0 0 ok 2008-Apr-28 21:43:02 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Steve Schnei 2008-Apr-28 21:43:03 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Steve Schnei 2008-Apr-28 21:43:03 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Steve Schnei 2008-Apr-28 21:43:03 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Steve Schnei 2008-Apr-28 21:43:03 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-28 21:43:03 START begin_task: Starting task 'WAPP calibration' 2008-Apr-28 21:43:03 LOG5 begin_task: Level: (3) ID = <10361> Status = 0 0 0 0 ok 2008-Apr-28 21:43:03 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-28 21:43:03 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-28 21:43:03 START begin_task: Starting task 'selecting calibration type' 2008-Apr-28 21:43:03 LOG5 begin_task: Level: (4) ID = <10362> Status = 0 0 0 0 ok 2008-Apr-28 21:43:03 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-28 21:43:03 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-28 21:43:03 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 21:43:03 START begin_task: Starting task 'waiting on setcal' 2008-Apr-28 21:43:03 LOG5 begin_task: Level: (5) ID = <10363> Status = 0 0 0 0 ok 2008-Apr-28 21:43:03 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Steve Schnei' 2008-Apr-28 21:43:03 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-28 21:43:03 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 21:43:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 21:43:03 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-28 21:43:03 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-28 21:43:03 LOG5 end_task: Level: (5) ID = <10363> Status = 0 0 0 0 ok 2008-Apr-28 21:43:03 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-28 21:43:03 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-28 21:43:03 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-28 21:43:03 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-28 21:43:03 LOG5 begin_task: Level: (5) ID = <10364> Status = 0 0 0 0 ok 2008-Apr-28 21:43:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 21:43:03 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-28 21:43:03 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-28 21:43:03 LOG5 end_task: Level: (5) ID = <10364> Status = 0 0 0 0 ok 2008-Apr-28 21:43:03 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-28 21:43:03 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-28 21:43:03 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-28 21:43:03 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-28 21:43:03 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-28 21:43:03 LOG5 begin_task: Level: (5) ID = <10365> Status = 0 0 0 0 ok 2008-Apr-28 21:43:03 NOTE WAPPDATA-new_file: New FITS file: wapp.20080428.a2048.0008.fits 2008-Apr-28 21:43:03 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-28 21:43:03 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-28 21:43:03 LOG5 end_task: Level: (5) ID = <10365> Status = 0 0 0 0 ok 2008-Apr-28 21:43:03 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-28 21:43:03 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-28 21:43:03 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-28 21:43:03 LOG5 finish_task: Level: (4) ID = <10362> Status = 0 0 0 0 ok 2008-Apr-28 21:43:03 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-28 21:43:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 21:43:03 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-28 21:43:03 LOG5 end_task: Level: (4) ID = <10362> Status = 0 0 0 0 ok 2008-Apr-28 21:43:03 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-28 21:43:03 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-28 21:43:03 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-28 21:43:03 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-28 21:43:03 LOG5 begin_task: Level: (4) ID = <10366> Status = 0 0 0 0 ok 2008-Apr-28 21:43:03 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080428.a2048.0008.fits} 2008-Apr-28 21:43:03 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-28 21:43:03 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-28 21:43:03 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-28 21:43:03 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-28 21:43:03 LOG5 end_task: Level: (4) ID = <10366> Status = 0 0 0 0 ok 2008-Apr-28 21:43:03 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-28 21:43:03 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-28 21:43:03 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-28 21:43:03 LOG5 begin_task: Level: (4) ID = <10367> Status = 0 0 0 0 ok 2008-Apr-28 21:43:03 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-28 21:43:03 LOG5 log_alfabeam: Parameters: 12.134277777777775 7.7726944444444435 11.759995 2008.3282817134382 42.899902 2008-Apr-28 21:43:03 LOG4 log_alfabeam: ALFABEAM 0 12.134277777777770 7.772694444444447 2008-Apr-28 21:43:03 LOG4 log_alfabeam: ALFABEAM 1 12.132304465410920 7.874497880922785 2008-Apr-28 21:43:03 LOG4 log_alfabeam: ALFABEAM 2 12.128060264704207 7.807204247139122 2008-Apr-28 21:43:03 LOG4 log_alfabeam: ALFABEAM 3 12.129981928484835 7.705173657626252 2008-Apr-28 21:43:03 LOG4 log_alfabeam: ALFABEAM 4 12.136228207595954 7.670760779481490 2008-Apr-28 21:43:03 LOG4 log_alfabeam: ALFABEAM 5 12.140530848706158 7.738855655606298 2008-Apr-28 21:43:03 LOG4 log_alfabeam: ALFABEAM 6 12.138528834867806 7.840558954299908 2008-Apr-28 21:43:03 INFO2 take_spectra: Starting WAPP scan: 811900110 2008-Apr-28 21:43:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-28 21:43:04 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-28 21:43:04 LOG5 begin_task: Level: (5) ID = <10368> Status = 0 0 0 0 ok 2008-Apr-28 21:43:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-28 21:43:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6185.00 2008-Apr-28 21:43:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.158426 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-28 21:43:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.158426 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 21:43:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.158426 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 21:43:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.158426 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 21:43:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.158426 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 21:43:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.158426 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-28 21:43:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.158426 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-28 21:43:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.158426 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-28 21:43:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.158426 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-28 21:43:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-28 21:43:10 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-28 21:43:10 LOG5 end_task: Level: (5) ID = <10368> Status = 0 0 0 0 ok 2008-Apr-28 21:43:10 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-28 21:43:10 LOG5 end_task: Level: (4) ID = <10367> Status = 0 0 0 0 ok 2008-Apr-28 21:43:10 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-28 21:43:10 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-28 21:43:10 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-28 21:43:10 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-28 21:43:10 LOG5 begin_task: Level: (4) ID = <10369> Status = 0 0 0 0 ok 2008-Apr-28 21:43:10 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-28 21:43:10 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-28 21:43:10 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-28 21:43:10 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-28 21:43:10 LOG5 end_task: Level: (4) ID = <10369> Status = 0 0 0 0 ok 2008-Apr-28 21:43:10 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-28 21:43:10 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-28 21:43:10 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-28 21:43:10 LOG5 begin_task: Level: (4) ID = <10370> Status = 0 0 0 0 ok 2008-Apr-28 21:43:10 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-28 21:43:10 LOG5 log_alfabeam: Parameters: 12.134277777777775 7.7726944444444435 11.761945 2008.3282819352548 42.899902 2008-Apr-28 21:43:10 LOG4 log_alfabeam: ALFABEAM 0 12.134277777777770 7.772694444444446 2008-Apr-28 21:43:10 LOG4 log_alfabeam: ALFABEAM 1 12.132318526750467 7.874557819017568 2008-Apr-28 21:43:10 LOG4 log_alfabeam: ALFABEAM 2 12.128065065924348 7.807394320931349 2008-Apr-28 21:43:10 LOG4 log_alfabeam: ALFABEAM 3 12.129972582892472 7.705305111859235 2008-Apr-28 21:43:10 LOG4 log_alfabeam: ALFABEAM 4 12.136214110031652 7.670701395613357 2008-Apr-28 21:43:10 LOG4 log_alfabeam: ALFABEAM 5 12.140526179569266 7.738665276431210 2008-Apr-28 21:43:10 LOG4 log_alfabeam: ALFABEAM 6 12.138538177535573 7.840429267803256 2008-Apr-28 21:43:10 INFO2 take_spectra: Starting WAPP scan: 811900111 2008-Apr-28 21:43:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-28 21:43:11 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-28 21:43:11 LOG5 begin_task: Level: (5) ID = <10371> Status = 0 0 0 0 ok 2008-Apr-28 21:43:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-28 21:43:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.553 > 1.4)! 2008-Apr-28 21:43:11 LOG4 check_wapp_levels: WAPP-1 power levels: 1.553 1.229 1.178 1.452 2008-Apr-28 21:43:11 LOG4 check_wapp_levels: WAPP-2 power levels: 1.414 1.313 1.362 1.429 2008-Apr-28 21:43:11 LOG4 check_wapp_levels: WAPP-3 power levels: 1.277 1.328 1.402 1.215 2008-Apr-28 21:43:11 LOG4 check_wapp_levels: WAPP-4 power levels: 1.402 1.421 1.526 1.262 2008-Apr-28 21:43:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6192.00 2008-Apr-28 21:43:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.158426 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-28 21:43:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.158426 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 21:43:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.158426 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 21:43:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.158426 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 21:43:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.158426 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 21:43:17 INFO5 check_wapp_levels: WAPP power levels are between 1.178 and 1.553 (still bad) 2008-Apr-28 21:43:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.158426 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-28 21:43:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.158426 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-28 21:43:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.158426 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-28 21:43:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.158426 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-28 21:43:17 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-28 21:43:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-28 21:43:17 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-28 21:43:17 LOG5 end_task: Level: (5) ID = <10371> Status = 0 0 0 0 ok 2008-Apr-28 21:43:17 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-28 21:43:17 LOG5 end_task: Level: (4) ID = <10370> Status = 0 0 0 0 ok 2008-Apr-28 21:43:17 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-28 21:43:17 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-28 21:43:17 LOG5 finish_task: Level: (3) ID = <10361> Status = 0 0 0 0 ok 2008-Apr-28 21:43:17 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-28 21:43:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 21:43:17 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-28 21:43:17 LOG5 end_task: Level: (3) ID = <10361> Status = 0 0 0 0 ok 2008-Apr-28 21:43:17 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-28 21:43:17 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 331.50 and ZA = 12.01 2008-Apr-28 21:43:17 LOG3 track_source: Calling 'track_source AGESVC1A_p2_050 331.50 12.0090671185 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-28 21:43:17 START begin_task: Starting task 'sending tracking commands' 2008-Apr-28 21:43:17 LOG5 begin_task: Level: (3) ID = <10372> Status = 0 0 0 0 ok 2008-Apr-28 21:43:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_050} INFO {Slewing to source 'AGESVC1A_p2_050' ...} 2008-Apr-28 21:43:17 INFO1 track_source: Starting to track AGESVC1A_p2_050 2008-Apr-28 21:43:17 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_050" 2008-Apr-28 21:43:17 LOG3 vw_send: To DATATAKING: set ra 331.50 2008-Apr-28 21:43:17 LOG3 vw_send: To DATATAKING: set dec 12.0090671185 2008-Apr-28 21:43:17 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-28 21:43:17 LOG3 vw_send: To DATATAKING: pnt tr 331.50 12.0090671185 -CF 2008-Apr-28 21:43:17 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-28 21:43:17 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-28 21:43:17 LOG5 finish_task: Level: (3) ID = <10372> Status = 0 0 0 0 ok 2008-Apr-28 21:43:17 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-28 21:43:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 21:43:18 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-28 21:43:18 LOG5 end_task: Level: (3) ID = <10372> Status = 0 0 0 0 ok 2008-Apr-28 21:43:18 LOG1 fixed_driftmap: Parameters: HA = -00:23:00.0 Start = 11:46:27.1 LST = 11:45:50.0 diff = 37.1 secs 2008-Apr-28 21:43:18 INFO2 fixed_driftmap: Waiting 35.1 seconds for RA 12:09:27 2008-Apr-28 21:43:18 INFO2 lstwait: Waiting for 35 secs from LST 11:45:50 to LST 11:46:25 ... 2008-Apr-28 21:43:18 LOG4 send_obs_status: To obs_status: <1> TASKTIME 35.013248405182793 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-28 21:43:18 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-28 21:43:18 LOG5 begin_task: Level: (3) ID = <10373> Status = 0 0 0 0 ok 2008-Apr-28 21:43:18 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_050" 2008-Apr-28 21:43:18 LOG4 got_cormsg: From DATATAKING: set ra 331.50 2008-Apr-28 21:43:18 LOG4 got_cormsg: From DATATAKING: set dec 12.0090671185 2008-Apr-28 21:43:18 LOG4 got_cormsg: From DATATAKING: vw% 331.50 2008-Apr-28 21:43:18 LOG4 got_cormsg: From DATATAKING: vw% 12.0090671185 2008-Apr-28 21:43:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 21:43:18 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-28 21:43:18 LOG4 got_cormsg: From DATATAKING: pnt tr 331.50 12.0090671185 -CF 2008-Apr-28 21:43:18 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-28 21:43:18 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-28 21:43:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 21:43:23 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.875 and 1.126 2008-Apr-28 21:43:53 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-28 21:43:53 LOG5 end_task: Level: (3) ID = <10373> Status = 0 0 0 0 ok 2008-Apr-28 21:43:53 LOG4 lstwait: Finished waiting, the gui caused difference: -0.01271031999650063 2008-Apr-28 21:43:53 INFO3 lstwait: Finished waiting 2008-Apr-28 21:43:53 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-28 21:43:53 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-28 21:43:53 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-28 21:43:53 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-28 21:43:53 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-28 21:43:53 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-28 21:43:53 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-28 21:43:53 LOG5 begin_task: Level: (3) ID = <10374> Status = 0 0 0 0 ok 2008-Apr-28 21:43:53 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-28 21:43:53 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-28 21:43:53 INFO2 take_spectra: Starting WAPP scan: 811900112 2008-Apr-28 21:43:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-28 21:43:53 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-28 21:43:53 LOG5 begin_task: Level: (4) ID = <10375> Status = 0 0 0 0 ok 2008-Apr-28 21:43:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-28 21:43:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6234.00 2008-Apr-28 21:43:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.158426 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-28 21:43:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.158426 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 21:43:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.158426 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 21:43:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.158426 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 21:43:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.158426 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 21:43:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.158426 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-28 21:43:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.158426 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-28 21:43:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.158426 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-28 21:43:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.158426 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-28 21:47:01 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 21:47:01.300 (seconds: 78421.300)!} 2008-Apr-28 21:47:01 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 21:47:01.300 (seconds: 78421.300)! 2008-Apr-28 21:47:02 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 78420.0 to 78421.0! 2008-Apr-28 21:47:03 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (78420.0 - 78422.0)! 2008-Apr-28 22:03:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-28 22:03:54 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-28 22:03:54 LOG5 end_task: Level: (4) ID = <10375> Status = 0 0 0 0 ok 2008-Apr-28 22:03:54 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-28 22:03:54 LOG5 end_task: Level: (3) ID = <10374> Status = 0 0 0 0 ok 2008-Apr-28 22:03:54 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-28 22:03:54 LOG5 finish_task: Level: (2) ID = <10341> Status = 0 0 0 0 ok 2008-Apr-28 22:03:54 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-28 22:03:54 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-28 22:03:54 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-28 22:03:54 LOG5 end_task: Level: (2) ID = <10341> Status = 0 0 0 0 ok 2008-Apr-28 22:03:54 COMMAND run_command_line: EXECUTING command 39: 'FIXEDDRIFT az=0.00 alfaangle=19.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_052 ra=120900.00 dec=74330.00' 2008-Apr-28 22:03:54 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-28 22:03:55 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-28 22:03:55 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 0.00 19.1 hcorcal 5 tracking no first 1 AGESVC1A_p2_052 120900.00 74330.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-28 22:03:55 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-28 22:03:55 LOG5 begin_task: Level: (2) ID = <10376> Status = 0 0 0 0 ok 2008-Apr-28 22:03:55 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGESVC1A_p2_050' 2008-Apr-28 22:03:55 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-28 22:03:55 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1A_p2_052} 2008-Apr-28 22:03:55 INFO3 fixed_driftmap: Sending telescope to Az = 0.00 and ZA = 10.68 2008-Apr-28 22:03:55 LOG3 track_source: Calling 'track_source AGESVC1A_p2_052 0.00 10.6774619327 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-28 22:03:55 START begin_task: Starting task 'sending tracking commands' 2008-Apr-28 22:03:55 LOG5 begin_task: Level: (3) ID = <10377> Status = 0 0 0 0 ok 2008-Apr-28 22:03:55 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_052} INFO {Slewing to source 'AGESVC1A_p2_052' ...} 2008-Apr-28 22:03:55 INFO1 track_source: Starting to track AGESVC1A_p2_052 2008-Apr-28 22:03:55 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_052" 2008-Apr-28 22:03:55 LOG3 vw_send: To DATATAKING: set ra 0.00 2008-Apr-28 22:03:55 LOG3 vw_send: To DATATAKING: set dec 10.6774619327 2008-Apr-28 22:03:55 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-28 22:03:55 LOG3 vw_send: To DATATAKING: pnt tr 0.00 10.6774619327 -CF 2008-Apr-28 22:03:55 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-28 22:03:55 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-28 22:03:55 LOG5 finish_task: Level: (3) ID = <10377> Status = 0 0 0 0 ok 2008-Apr-28 22:03:55 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-28 22:03:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 22:03:55 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-28 22:03:55 LOG5 end_task: Level: (3) ID = <10377> Status = 0 0 0 0 ok 2008-Apr-28 22:03:55 START begin_task: Starting task 'rotate ALFA to +19.1 degrees' 2008-Apr-28 22:03:55 LOG5 begin_task: Level: (3) ID = <10378> Status = 0 0 0 0 ok 2008-Apr-28 22:03:55 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19.1 degrees ...} 2008-Apr-28 22:03:55 INFO2 rotate_alfa: ALFA commanded to +19.1 degrees 2008-Apr-28 22:03:55 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19.1 REPLY 2008-Apr-28 22:03:55 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-28 22:03:55 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-28 22:03:55 LOG5 begin_task: Level: (4) ID = <10379> Status = 0 0 0 0 ok 2008-Apr-28 22:03:55 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_052" 2008-Apr-28 22:03:55 LOG4 got_cormsg: From DATATAKING: set ra 0.00 2008-Apr-28 22:03:55 LOG4 got_cormsg: From DATATAKING: set dec 10.6774619327 2008-Apr-28 22:03:55 LOG4 got_cormsg: From DATATAKING: vw% 0.00 2008-Apr-28 22:03:55 LOG4 got_cormsg: From DATATAKING: vw% 10.6774619327 2008-Apr-28 22:03:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 22:03:55 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-28 22:03:55 LOG4 got_cormsg: From DATATAKING: pnt tr 0.00 10.6774619327 -CF 2008-Apr-28 22:03:55 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-28 22:03:55 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-28 22:03:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 22:04:10 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-28 22:04:10 INFO3 alfa_motor: ALFA rotator in-position +19.10 degrees 2008-Apr-28 22:04:10 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-28 22:04:10 LOG5 end_task: Level: (4) ID = <10379> Status = 0 0 0 0 ok 2008-Apr-28 22:04:10 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-28 22:04:10 STOP finish_task: Finishing task 'rotate ALFA to +19.1 degrees' 2008-Apr-28 22:04:10 LOG5 finish_task: Level: (3) ID = <10378> Status = 0 0 0 0 ok 2008-Apr-28 22:04:10 INFO2 finish_task: DONE finished configuration: rotating ALFA to +19.1 degrees 2008-Apr-28 22:04:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 22:04:10 STOP end_task: Finishing task 'rotate ALFA to +19.1 degrees' with status 'OK' 2008-Apr-28 22:04:10 LOG5 end_task: Level: (3) ID = <10378> Status = 0 0 0 0 ok 2008-Apr-28 22:04:10 START begin_task: Starting task 'waiting on telescope' 2008-Apr-28 22:04:10 LOG5 begin_task: Level: (3) ID = <10380> Status = 0 0 0 0 ok 2008-Apr-28 22:04:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-28 22:04:10 LOG3 waittrk: Start waittrk 5 2008-Apr-28 22:04:10 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-28 22:04:10 LOG5 begin_task: Level: (4) ID = <10381> Status = 0 0 0 0 ok 2008-Apr-28 22:04:15 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-28 22:04:15 LOG5 end_task: Level: (4) ID = <10381> Status = 0 0 0 0 ok 2008-Apr-28 22:04:15 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-28 22:04:15 LOG5 begin_task: Level: (4) ID = <10382> Status = 0 0 0 0 ok 2008-Apr-28 22:05:20 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-28 22:05:20 LOG5 end_task: Level: (4) ID = <10382> Status = 0 0 0 0 ok 2008-Apr-28 22:05:20 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-28 22:05:20 INFO2 waittrk: Now tracking AGESVC1A_p2_052 2008-Apr-28 22:05:20 LOG4 waittrk: Current telescope position: Az = 359.64 ZA = 10.64 2008-Apr-28 22:05:20 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-28 22:05:20 LOG5 finish_task: Level: (3) ID = <10380> Status = 0 0 0 0 ok 2008-Apr-28 22:05:20 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-28 22:05:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 22:05:20 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-28 22:05:20 LOG5 end_task: Level: (3) ID = <10380> Status = 0 0 0 0 ok 2008-Apr-28 22:05:20 START begin_task: Starting task 'selecting calibration type' 2008-Apr-28 22:05:20 LOG5 begin_task: Level: (3) ID = <10383> Status = 0 0 0 0 ok 2008-Apr-28 22:05:20 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-28 22:05:20 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-28 22:05:20 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 22:05:20 START begin_task: Starting task 'waiting on setcal' 2008-Apr-28 22:05:20 LOG5 begin_task: Level: (4) ID = <10384> Status = 0 0 0 0 ok 2008-Apr-28 22:05:20 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-28 22:05:20 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 22:05:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 22:05:21 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-28 22:05:21 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-28 22:05:21 LOG5 end_task: Level: (4) ID = <10384> Status = 0 0 0 0 ok 2008-Apr-28 22:05:21 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-28 22:05:21 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-28 22:05:21 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-28 22:05:21 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-28 22:05:21 LOG5 begin_task: Level: (4) ID = <10385> Status = 0 0 0 0 ok 2008-Apr-28 22:05:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 22:05:21 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-28 22:05:21 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-28 22:05:21 LOG5 end_task: Level: (4) ID = <10385> Status = 0 0 0 0 ok 2008-Apr-28 22:05:21 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-28 22:05:21 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-28 22:05:21 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-28 22:05:21 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-28 22:05:21 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-28 22:05:21 LOG5 begin_task: Level: (4) ID = <10386> Status = 0 0 0 0 ok 2008-Apr-28 22:05:21 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-28 22:05:21 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-28 22:05:21 LOG5 end_task: Level: (4) ID = <10386> Status = 0 0 0 0 ok 2008-Apr-28 22:05:21 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-28 22:05:21 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-28 22:05:21 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-28 22:05:21 LOG5 finish_task: Level: (3) ID = <10383> Status = 0 0 0 0 ok 2008-Apr-28 22:05:21 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-28 22:05:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 22:05:21 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-28 22:05:21 LOG5 end_task: Level: (3) ID = <10383> Status = 0 0 0 0 ok 2008-Apr-28 22:05:21 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2008-Apr-28 22:05:21 INFO2 astwait: Waiting for 29 seconds from 02:05:21 to 02:05:50 UTC ... 2008-Apr-28 22:05:21 LOG4 send_obs_status: To obs_status: <1> TASKTIME 29 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-28 22:05:21 START begin_task: Starting task 'waiting on waiting for AST time' 2008-Apr-28 22:05:21 LOG5 begin_task: Level: (3) ID = <10387> Status = 0 0 0 0 ok 2008-Apr-28 22:05:50 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2008-Apr-28 22:05:50 LOG5 end_task: Level: (3) ID = <10387> Status = 0 0 0 0 ok 2008-Apr-28 22:05:50 INFO3 astwait: Finished waiting 2008-Apr-28 22:05:50 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-28 22:05:50 LOG5 dopset_later: Calling 'dopset_later 61.26992365742769' 2008-Apr-28 22:05:50 INFO3 dopset_later: Setting Doppler correction for 22:06:50 (61.3 seconds from now) 2008-Apr-28 22:05:50 LOG5 antvel: Calling 'antvel 0.000000 10.677462 F 61.26992365742769' 2008-Apr-28 22:05:50 LOG2 antvel: Parameters to Doppler: Heliocentric 94010 2008 119 0.0 2008-Apr-28 22:05:50 INFO5 antvel: Computed antenna velocity: +18.49449 km/s 2008-Apr-28 22:05:50 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=18.494489286 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-28 22:05:50 INFO4 dopset_gen: New sky frequencies: 1381.158224 1381.158224 1381.158224 1381.158224 1381.158224 1381.158224 1381.158224 1381.158224 1381.158224 2008-Apr-28 22:05:50 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.158224 sky0=1381.158224 sky1=1381.158224 sky2=1381.158224 sky3=1381.158224 sky4=1381.158224 sky5=1381.158224 sky6=1381.158224 sky7=1381.158224 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-28 22:05:50 LOG2 dopset_gen: Result from 'sky2syn': 1631.158224 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-28 22:05:50 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631158224.0} 2008-Apr-28 22:05:50 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 22:05:50 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-28 22:05:50 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-28 22:05:50 INFO5 fixed_driftmap: Tracking J2000 position: RA = 12:08:03.2 Dec = +07:43:21.7 2008-Apr-28 22:05:50 LOG3 track_source: Calling 'track_source AGESVC1A_p2_052 120803.2 074321.7 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-28 22:05:50 START begin_task: Starting task 'sending tracking commands' 2008-Apr-28 22:05:50 LOG5 begin_task: Level: (3) ID = <10388> Status = 0 0 0 0 ok 2008-Apr-28 22:05:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_052} INFO {Slewing to source 'AGESVC1A_p2_052' ...} 2008-Apr-28 22:05:50 INFO1 track_source: Starting to track AGESVC1A_p2_052 2008-Apr-28 22:05:50 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_052" 2008-Apr-28 22:05:50 LOG3 vw_send: To DATATAKING: set ra 120803.2 2008-Apr-28 22:05:50 LOG3 vw_send: To DATATAKING: set dec 074321.7 2008-Apr-28 22:05:50 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-28 22:05:50 LOG3 vw_send: To DATATAKING: pnt tr 120803.2 074321.7 -CJ 2008-Apr-28 22:05:50 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-28 22:05:50 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-28 22:05:50 LOG5 finish_task: Level: (3) ID = <10388> Status = 0 0 0 0 ok 2008-Apr-28 22:05:50 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-28 22:05:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 22:05:50 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-28 22:05:50 LOG5 end_task: Level: (3) ID = <10388> Status = 0 0 0 0 ok 2008-Apr-28 22:05:50 START begin_task: Starting task 'waiting on telescope' 2008-Apr-28 22:05:50 LOG5 begin_task: Level: (3) ID = <10389> Status = 0 0 0 0 ok 2008-Apr-28 22:05:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-28 22:05:50 LOG3 waittrk: Start waittrk 5 2008-Apr-28 22:05:50 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-28 22:05:50 LOG5 begin_task: Level: (4) ID = <10390> Status = 0 0 0 0 ok 2008-Apr-28 22:05:50 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631158224.0} 2008-Apr-28 22:05:50 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 22:05:50 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_052" 2008-Apr-28 22:05:50 LOG4 got_cormsg: From DATATAKING: set ra 120803.2 2008-Apr-28 22:05:50 LOG4 got_cormsg: From DATATAKING: set dec 074321.7 2008-Apr-28 22:05:50 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 120803.2 2008-Apr-28 22:05:50 LOG4 got_cormsg: From DATATAKING: vw% 074321.7 2008-Apr-28 22:05:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 22:05:50 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-28 22:05:50 LOG4 got_cormsg: From DATATAKING: pnt tr 120803.2 074321.7 -CJ 2008-Apr-28 22:05:50 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-28 22:05:50 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-28 22:05:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 22:05:55 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-28 22:05:55 LOG5 end_task: Level: (4) ID = <10390> Status = 0 0 0 0 ok 2008-Apr-28 22:05:55 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-28 22:05:55 LOG5 begin_task: Level: (4) ID = <10391> Status = 0 0 0 0 ok 2008-Apr-28 22:05:57 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-28 22:05:57 LOG5 end_task: Level: (4) ID = <10391> Status = 0 0 0 0 ok 2008-Apr-28 22:05:57 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-28 22:05:57 INFO2 waittrk: Now tracking AGESVC1A_p2_052 2008-Apr-28 22:05:57 LOG4 waittrk: Current telescope position: Az = 359.73 ZA = 10.65 2008-Apr-28 22:05:57 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-28 22:05:57 LOG5 finish_task: Level: (3) ID = <10389> Status = 0 0 0 0 ok 2008-Apr-28 22:05:57 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-28 22:05:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 22:05:57 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-28 22:05:57 LOG5 end_task: Level: (3) ID = <10389> Status = 0 0 0 0 ok 2008-Apr-28 22:05:57 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-28 22:05:57 LOG5 begin_task: Level: (3) ID = <10392> Status = 0 0 0 0 ok 2008-Apr-28 22:05:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-28 22:05:58 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-28 22:05:58 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-28 22:05:58 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-28 22:05:58 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 22:05:58 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-28 22:05:58 LOG5 begin_task: Level: (4) ID = <10393> Status = 0 0 0 0 ok 2008-Apr-28 22:05:58 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-28 22:05:58 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 22:05:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 22:05:58 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-28 22:05:58 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-28 22:05:58 LOG5 end_task: Level: (4) ID = <10393> Status = 0 0 0 0 ok 2008-Apr-28 22:05:58 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-28 22:05:58 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-28 22:05:58 LOG5 begin_task: Level: (4) ID = <10394> Status = 0 0 0 0 ok 2008-Apr-28 22:05:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-28 22:05:58 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-28 22:05:58 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-28 22:05:58 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-28 22:05:58 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-28 22:05:58 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-28 22:05:58 LOG5 begin_task: Level: (5) ID = <10395> Status = 0 0 0 0 ok 2008-Apr-28 22:05:58 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-28 22:05:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 22:05:58 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 1 dB --- beam 1: 7 6 dB 2008-Apr-28 22:05:58 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-28 22:05:58 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 6 dB 2008-Apr-28 22:05:58 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 2 3 dB 2008-Apr-28 22:05:58 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-28 22:05:58 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-28 22:05:58 LOG5 end_task: Level: (5) ID = <10395> Status = 0 0 0 0 ok 2008-Apr-28 22:05:58 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.125 0.968 ALFA beam 1: 1.117 1.079 2008-Apr-28 22:05:58 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.024 0.943 ALFA beam 3: 0.974 1.048 2008-Apr-28 22:05:58 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.929 0.967 ALFA beam 5: 1.012 0.895 2008-Apr-28 22:05:58 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.017 1.025 ALFA beam 7: 1.105 0.913 2008-Apr-28 22:05:58 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-28 22:05:58 LOG5 finish_task: Level: (4) ID = <10394> Status = 0 0 0 0 ok 2008-Apr-28 22:05:58 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-28 22:05:59 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 22:05:59 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-28 22:05:59 LOG5 end_task: Level: (4) ID = <10394> Status = 0 0 0 0 ok 2008-Apr-28 22:05:59 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-28 22:05:59 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-28 22:05:59 LOG5 finish_task: Level: (3) ID = <10392> Status = 0 0 0 0 ok 2008-Apr-28 22:05:59 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-28 22:05:59 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 22:05:59 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-28 22:05:59 LOG5 end_task: Level: (3) ID = <10392> Status = 0 0 0 0 ok 2008-Apr-28 22:05:59 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Steve Schnei 2008-Apr-28 22:05:59 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Steve Schnei 2008-Apr-28 22:05:59 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Steve Schnei 2008-Apr-28 22:05:59 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Steve Schnei 2008-Apr-28 22:05:59 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-28 22:05:59 START begin_task: Starting task 'WAPP calibration' 2008-Apr-28 22:05:59 LOG5 begin_task: Level: (3) ID = <10396> Status = 0 0 0 0 ok 2008-Apr-28 22:05:59 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-28 22:05:59 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-28 22:05:59 START begin_task: Starting task 'selecting calibration type' 2008-Apr-28 22:05:59 LOG5 begin_task: Level: (4) ID = <10397> Status = 0 0 0 0 ok 2008-Apr-28 22:05:59 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-28 22:05:59 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-28 22:05:59 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 22:05:59 START begin_task: Starting task 'waiting on setcal' 2008-Apr-28 22:05:59 LOG5 begin_task: Level: (5) ID = <10398> Status = 0 0 0 0 ok 2008-Apr-28 22:05:59 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Steve Schnei' 2008-Apr-28 22:05:59 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-28 22:05:59 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 22:05:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 22:05:59 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-28 22:05:59 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-28 22:05:59 LOG5 end_task: Level: (5) ID = <10398> Status = 0 0 0 0 ok 2008-Apr-28 22:05:59 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-28 22:05:59 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-28 22:05:59 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-28 22:05:59 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-28 22:05:59 LOG5 begin_task: Level: (5) ID = <10399> Status = 0 0 0 0 ok 2008-Apr-28 22:05:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 22:05:59 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-28 22:05:59 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-28 22:05:59 LOG5 end_task: Level: (5) ID = <10399> Status = 0 0 0 0 ok 2008-Apr-28 22:05:59 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-28 22:05:59 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-28 22:05:59 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-28 22:05:59 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-28 22:05:59 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-28 22:05:59 LOG5 begin_task: Level: (5) ID = <10400> Status = 0 0 0 0 ok 2008-Apr-28 22:05:59 NOTE WAPPDATA-new_file: New FITS file: wapp.20080428.a2048.0009.fits 2008-Apr-28 22:05:59 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-28 22:05:59 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-28 22:05:59 LOG5 end_task: Level: (5) ID = <10400> Status = 0 0 0 0 ok 2008-Apr-28 22:05:59 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-28 22:05:59 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-28 22:05:59 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-28 22:05:59 LOG5 finish_task: Level: (4) ID = <10397> Status = 0 0 0 0 ok 2008-Apr-28 22:05:59 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-28 22:05:59 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 22:05:59 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-28 22:05:59 LOG5 end_task: Level: (4) ID = <10397> Status = 0 0 0 0 ok 2008-Apr-28 22:05:59 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-28 22:05:59 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-28 22:05:59 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-28 22:05:59 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-28 22:05:59 LOG5 begin_task: Level: (4) ID = <10401> Status = 0 0 0 0 ok 2008-Apr-28 22:05:59 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080428.a2048.0009.fits} 2008-Apr-28 22:06:00 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-28 22:06:00 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-28 22:06:00 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-28 22:06:00 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-28 22:06:00 LOG5 end_task: Level: (4) ID = <10401> Status = 0 0 0 0 ok 2008-Apr-28 22:06:00 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-28 22:06:00 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-28 22:06:00 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-28 22:06:00 LOG5 begin_task: Level: (4) ID = <10402> Status = 0 0 0 0 ok 2008-Apr-28 22:06:00 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-28 22:06:00 LOG5 log_alfabeam: Parameters: 12.13422222222222 7.7226944444444436 12.143264 2008.3283253162472 19.099895 2008-Apr-28 22:06:00 LOG4 log_alfabeam: ALFABEAM 0 12.134222222224025 7.722694444444443 2008-Apr-28 22:06:00 LOG4 log_alfabeam: ALFABEAM 1 12.133088943289954 7.827496134867443 2008-Apr-28 22:06:00 LOG4 log_alfabeam: ALFABEAM 2 12.128435894902635 7.758160136884893 2008-Apr-28 22:06:00 LOG4 log_alfabeam: ALFABEAM 3 12.129532551018768 7.653254453634436 2008-Apr-28 22:06:00 LOG4 log_alfabeam: ALFABEAM 4 12.135377488232663 7.617918841163630 2008-Apr-28 22:06:00 LOG4 log_alfabeam: ALFABEAM 5 12.140045256056482 7.687900252469044 2008-Apr-28 22:06:00 LOG4 log_alfabeam: ALFABEAM 6 12.138853409317546 7.792567284769422 2008-Apr-28 22:06:00 INFO2 take_spectra: Starting WAPP scan: 811900113 2008-Apr-28 22:06:00 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-28 22:06:00 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-28 22:06:00 LOG5 begin_task: Level: (5) ID = <10403> Status = 0 0 0 0 ok 2008-Apr-28 22:06:00 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-28 22:06:00 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7561.00 2008-Apr-28 22:06:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.158224 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-28 22:06:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.158224 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 22:06:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.158224 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 22:06:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.158224 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 22:06:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.158224 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 22:06:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.158224 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-28 22:06:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.158224 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-28 22:06:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.158224 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-28 22:06:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.158224 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-28 22:06:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-28 22:06:06 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-28 22:06:06 LOG5 end_task: Level: (5) ID = <10403> Status = 0 0 0 0 ok 2008-Apr-28 22:06:06 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-28 22:06:06 LOG5 end_task: Level: (4) ID = <10402> Status = 0 0 0 0 ok 2008-Apr-28 22:06:06 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-28 22:06:06 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-28 22:06:06 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-28 22:06:06 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-28 22:06:06 LOG5 begin_task: Level: (4) ID = <10404> Status = 0 0 0 0 ok 2008-Apr-28 22:06:06 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-28 22:06:06 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-28 22:06:06 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-28 22:06:06 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-28 22:06:06 LOG5 end_task: Level: (4) ID = <10404> Status = 0 0 0 0 ok 2008-Apr-28 22:06:06 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-28 22:06:06 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-28 22:06:06 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-28 22:06:06 LOG5 begin_task: Level: (4) ID = <10405> Status = 0 0 0 0 ok 2008-Apr-28 22:06:06 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-28 22:06:06 LOG5 log_alfabeam: Parameters: 12.13422222222222 7.7226944444444436 12.145214 2008.3283255380636 19.099895 2008-Apr-28 22:06:06 LOG4 log_alfabeam: ALFABEAM 0 12.134222222222760 7.722694444444443 2008-Apr-28 22:06:06 LOG4 log_alfabeam: ALFABEAM 1 12.133107390140987 7.827539828117838 2008-Apr-28 22:06:06 LOG4 log_alfabeam: ALFABEAM 2 12.128442153213589 7.758384932957666 2008-Apr-28 22:06:06 LOG4 log_alfabeam: ALFABEAM 3 12.129520351263436 7.653436981413999 2008-Apr-28 22:06:06 LOG4 log_alfabeam: ALFABEAM 4 12.135359054678624 7.617874292704387 2008-Apr-28 22:06:06 LOG4 log_alfabeam: ALFABEAM 5 12.140039113288658 7.687674019840379 2008-Apr-28 22:06:06 LOG4 log_alfabeam: ALFABEAM 6 12.138865688104321 7.792387023956736 2008-Apr-28 22:06:06 INFO2 take_spectra: Starting WAPP scan: 811900114 2008-Apr-28 22:06:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-28 22:06:07 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-28 22:06:07 LOG5 begin_task: Level: (5) ID = <10406> Status = 0 0 0 0 ok 2008-Apr-28 22:06:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-28 22:06:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.548 > 1.4)! 2008-Apr-28 22:06:07 LOG4 check_wapp_levels: WAPP-1 power levels: 1.548 1.235 1.515 1.455 2008-Apr-28 22:06:07 LOG4 check_wapp_levels: WAPP-2 power levels: 1.395 1.303 1.351 1.437 2008-Apr-28 22:06:07 LOG4 check_wapp_levels: WAPP-3 power levels: 1.298 1.344 1.413 1.204 2008-Apr-28 22:06:07 LOG4 check_wapp_levels: WAPP-4 power levels: 1.426 1.429 1.548 1.273 2008-Apr-28 22:06:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7568.00 2008-Apr-28 22:06:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.158224 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-28 22:06:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.158224 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 22:06:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.158224 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 22:06:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.158224 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 22:06:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.158224 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 22:06:13 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.893 and 1.125 2008-Apr-28 22:06:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.158224 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-28 22:06:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.158224 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-28 22:06:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.158224 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-28 22:06:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.158224 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-28 22:06:13 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-28 22:06:13 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-28 22:06:13 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-28 22:06:13 LOG5 end_task: Level: (5) ID = <10406> Status = 0 0 0 0 ok 2008-Apr-28 22:06:13 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-28 22:06:13 LOG5 end_task: Level: (4) ID = <10405> Status = 0 0 0 0 ok 2008-Apr-28 22:06:13 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-28 22:06:13 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-28 22:06:13 LOG5 finish_task: Level: (3) ID = <10396> Status = 0 0 0 0 ok 2008-Apr-28 22:06:13 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-28 22:06:13 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 22:06:13 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-28 22:06:13 LOG5 end_task: Level: (3) ID = <10396> Status = 0 0 0 0 ok 2008-Apr-28 22:06:13 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-28 22:06:13 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 0.00 and ZA = 10.68 2008-Apr-28 22:06:13 LOG3 track_source: Calling 'track_source AGESVC1A_p2_052 0.00 10.6774619327 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-28 22:06:13 START begin_task: Starting task 'sending tracking commands' 2008-Apr-28 22:06:13 LOG5 begin_task: Level: (3) ID = <10407> Status = 0 0 0 0 ok 2008-Apr-28 22:06:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_052} INFO {Slewing to source 'AGESVC1A_p2_052' ...} 2008-Apr-28 22:06:13 INFO1 track_source: Starting to track AGESVC1A_p2_052 2008-Apr-28 22:06:13 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_052" 2008-Apr-28 22:06:13 LOG3 vw_send: To DATATAKING: set ra 0.00 2008-Apr-28 22:06:13 LOG3 vw_send: To DATATAKING: set dec 10.6774619327 2008-Apr-28 22:06:13 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-28 22:06:13 LOG3 vw_send: To DATATAKING: pnt tr 0.00 10.6774619327 -CF 2008-Apr-28 22:06:13 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-28 22:06:13 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-28 22:06:13 LOG5 finish_task: Level: (3) ID = <10407> Status = 0 0 0 0 ok 2008-Apr-28 22:06:13 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-28 22:06:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 22:06:14 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-28 22:06:14 LOG5 end_task: Level: (3) ID = <10407> Status = 0 0 0 0 ok 2008-Apr-28 22:06:14 LOG1 fixed_driftmap: Parameters: HA = +00:00:00.0 Start = 12:09:27.2 LST = 12:08:49.8 diff = 37.4 secs 2008-Apr-28 22:06:14 INFO2 fixed_driftmap: Waiting 35.4 seconds for RA 12:09:27 2008-Apr-28 22:06:14 INFO2 lstwait: Waiting for 35.3 secs from LST 12:08:50 to LST 12:09:25 ... 2008-Apr-28 22:06:14 LOG4 send_obs_status: To obs_status: <1> TASKTIME 35.275094263824002 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-28 22:06:14 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-28 22:06:14 LOG5 begin_task: Level: (3) ID = <10408> Status = 0 0 0 0 ok 2008-Apr-28 22:06:14 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_052" 2008-Apr-28 22:06:14 LOG4 got_cormsg: From DATATAKING: set ra 0.00 2008-Apr-28 22:06:14 LOG4 got_cormsg: From DATATAKING: set dec 10.6774619327 2008-Apr-28 22:06:14 LOG4 got_cormsg: From DATATAKING: vw% 0.00 2008-Apr-28 22:06:14 LOG4 got_cormsg: From DATATAKING: vw% 10.6774619327 2008-Apr-28 22:06:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 22:06:14 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-28 22:06:14 LOG4 got_cormsg: From DATATAKING: pnt tr 0.00 10.6774619327 -CF 2008-Apr-28 22:06:14 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-28 22:06:14 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-28 22:06:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 22:06:49 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-28 22:06:49 LOG5 end_task: Level: (3) ID = <10408> Status = 0 0 0 0 ok 2008-Apr-28 22:06:49 LOG4 lstwait: Finished waiting, the gui caused difference: 0.7255269199951897 2008-Apr-28 22:06:49 INFO3 lstwait: Finished waiting 2008-Apr-28 22:06:49 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-28 22:06:49 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-28 22:06:49 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-28 22:06:49 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-28 22:06:49 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-28 22:06:49 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-28 22:06:49 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-28 22:06:49 LOG5 begin_task: Level: (3) ID = <10409> Status = 0 0 0 0 ok 2008-Apr-28 22:06:49 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-28 22:06:49 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-28 22:06:49 INFO2 take_spectra: Starting WAPP scan: 811900115 2008-Apr-28 22:06:50 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-28 22:06:50 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-28 22:06:50 LOG5 begin_task: Level: (4) ID = <10410> Status = 0 0 0 0 ok 2008-Apr-28 22:06:50 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-28 22:06:50 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7611.00 2008-Apr-28 22:06:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.158224 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-28 22:06:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.158224 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 22:06:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.158224 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 22:06:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.158224 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 22:06:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.158224 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 22:06:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.158224 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-28 22:06:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.158224 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-28 22:06:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.158224 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-28 22:06:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.158224 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-28 22:16:59 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 22:16:59.301 (seconds: 80219.301)!} 2008-Apr-28 22:16:59 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 22:16:59.301 (seconds: 80219.301)! 2008-Apr-28 22:17:00 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 80218.0 to 80219.0! 2008-Apr-28 22:17:01 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (80218.0 - 80220.0)! 2008-Apr-28 22:26:51 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-28 22:26:51 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-28 22:26:51 LOG5 end_task: Level: (4) ID = <10410> Status = 0 0 0 0 ok 2008-Apr-28 22:26:51 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-28 22:26:51 LOG5 end_task: Level: (3) ID = <10409> Status = 0 0 0 0 ok 2008-Apr-28 22:26:51 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-28 22:26:51 LOG5 finish_task: Level: (2) ID = <10376> Status = 0 0 0 0 ok 2008-Apr-28 22:26:51 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-28 22:26:51 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-28 22:26:51 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-28 22:26:51 LOG5 end_task: Level: (2) ID = <10376> Status = 0 0 0 0 ok 2008-Apr-28 22:26:51 COMMAND run_command_line: EXECUTING command 43: 'FIXEDDRIFT az=28.28 alfaangle=-4.5 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_054 ra=120900.00 dec=74030.00' 2008-Apr-28 22:26:51 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-28 22:26:52 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-28 22:26:52 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 28.28 -4.5 hcorcal 5 tracking no first 1 AGESVC1A_p2_054 120900.00 74030.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-28 22:26:52 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-28 22:26:52 LOG5 begin_task: Level: (2) ID = <10411> Status = 0 0 0 0 ok 2008-Apr-28 22:26:52 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGESVC1A_p2_052' 2008-Apr-28 22:26:52 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-28 22:26:52 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1A_p2_054} 2008-Apr-28 22:26:52 INFO3 fixed_driftmap: Sending telescope to Az = 28.28 and ZA = 12.10 2008-Apr-28 22:26:52 LOG3 track_source: Calling 'track_source AGESVC1A_p2_054 28.28 12.0978968209 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-28 22:26:52 START begin_task: Starting task 'sending tracking commands' 2008-Apr-28 22:26:52 LOG5 begin_task: Level: (3) ID = <10412> Status = 0 0 0 0 ok 2008-Apr-28 22:26:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_054} INFO {Slewing to source 'AGESVC1A_p2_054' ...} 2008-Apr-28 22:26:52 INFO1 track_source: Starting to track AGESVC1A_p2_054 2008-Apr-28 22:26:52 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_054" 2008-Apr-28 22:26:52 LOG3 vw_send: To DATATAKING: set ra 28.28 2008-Apr-28 22:26:52 LOG3 vw_send: To DATATAKING: set dec 12.0978968209 2008-Apr-28 22:26:52 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-28 22:26:52 LOG3 vw_send: To DATATAKING: pnt tr 28.28 12.0978968209 -CF 2008-Apr-28 22:26:52 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-28 22:26:52 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-28 22:26:52 LOG5 finish_task: Level: (3) ID = <10412> Status = 0 0 0 0 ok 2008-Apr-28 22:26:52 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-28 22:26:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 22:26:52 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-28 22:26:52 LOG5 end_task: Level: (3) ID = <10412> Status = 0 0 0 0 ok 2008-Apr-28 22:26:52 START begin_task: Starting task 'rotate ALFA to -4.5 degrees' 2008-Apr-28 22:26:52 LOG5 begin_task: Level: (3) ID = <10413> Status = 0 0 0 0 ok 2008-Apr-28 22:26:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -4.5 degrees ...} 2008-Apr-28 22:26:52 INFO2 rotate_alfa: ALFA commanded to -4.5 degrees 2008-Apr-28 22:26:52 LOG3 sock_errsend: To ALFAMOTOR: POSITION -4.5 REPLY 2008-Apr-28 22:26:52 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-28 22:26:52 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-28 22:26:52 LOG5 begin_task: Level: (4) ID = <10414> Status = 0 0 0 0 ok 2008-Apr-28 22:26:52 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_054" 2008-Apr-28 22:26:52 LOG4 got_cormsg: From DATATAKING: set ra 28.28 2008-Apr-28 22:26:52 LOG4 got_cormsg: From DATATAKING: set dec 12.0978968209 2008-Apr-28 22:26:52 LOG4 got_cormsg: From DATATAKING: vw% 28.28 2008-Apr-28 22:26:52 LOG4 got_cormsg: From DATATAKING: vw% 12.0978968209 2008-Apr-28 22:26:52 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 22:26:52 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-28 22:26:52 LOG4 got_cormsg: From DATATAKING: pnt tr 28.28 12.0978968209 -CF 2008-Apr-28 22:26:52 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-28 22:26:52 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-28 22:26:52 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 22:27:07 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-28 22:27:07 INFO3 alfa_motor: ALFA rotator in-position -4.50 degrees 2008-Apr-28 22:27:07 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-28 22:27:07 LOG5 end_task: Level: (4) ID = <10414> Status = 0 0 0 0 ok 2008-Apr-28 22:27:07 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-28 22:27:07 STOP finish_task: Finishing task 'rotate ALFA to -4.5 degrees' 2008-Apr-28 22:27:07 LOG5 finish_task: Level: (3) ID = <10413> Status = 0 0 0 0 ok 2008-Apr-28 22:27:07 INFO2 finish_task: DONE finished configuration: rotating ALFA to -4.5 degrees 2008-Apr-28 22:27:07 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 22:27:07 STOP end_task: Finishing task 'rotate ALFA to -4.5 degrees' with status 'OK' 2008-Apr-28 22:27:07 LOG5 end_task: Level: (3) ID = <10413> Status = 0 0 0 0 ok 2008-Apr-28 22:27:07 START begin_task: Starting task 'waiting on telescope' 2008-Apr-28 22:27:07 LOG5 begin_task: Level: (3) ID = <10415> Status = 0 0 0 0 ok 2008-Apr-28 22:27:07 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-28 22:27:07 LOG3 waittrk: Start waittrk 5 2008-Apr-28 22:27:07 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-28 22:27:07 LOG5 begin_task: Level: (4) ID = <10416> Status = 0 0 0 0 ok 2008-Apr-28 22:27:12 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-28 22:27:12 LOG5 end_task: Level: (4) ID = <10416> Status = 0 0 0 0 ok 2008-Apr-28 22:27:12 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-28 22:27:12 LOG5 begin_task: Level: (4) ID = <10417> Status = 0 0 0 0 ok 2008-Apr-28 22:28:17 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-28 22:28:17 LOG5 end_task: Level: (4) ID = <10417> Status = 0 0 0 0 ok 2008-Apr-28 22:28:17 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-28 22:28:17 INFO2 waittrk: Now tracking AGESVC1A_p2_054 2008-Apr-28 22:28:17 LOG4 waittrk: Current telescope position: Az = 388.01 ZA = 12.07 2008-Apr-28 22:28:17 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-28 22:28:17 LOG5 finish_task: Level: (3) ID = <10415> Status = 0 0 0 0 ok 2008-Apr-28 22:28:17 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-28 22:28:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 22:28:17 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-28 22:28:17 LOG5 end_task: Level: (3) ID = <10415> Status = 0 0 0 0 ok 2008-Apr-28 22:28:17 START begin_task: Starting task 'selecting calibration type' 2008-Apr-28 22:28:17 LOG5 begin_task: Level: (3) ID = <10418> Status = 0 0 0 0 ok 2008-Apr-28 22:28:17 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-28 22:28:17 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-28 22:28:17 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 22:28:17 START begin_task: Starting task 'waiting on setcal' 2008-Apr-28 22:28:17 LOG5 begin_task: Level: (4) ID = <10419> Status = 0 0 0 0 ok 2008-Apr-28 22:28:17 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-28 22:28:17 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 22:28:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 22:28:18 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-28 22:28:18 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-28 22:28:18 LOG5 end_task: Level: (4) ID = <10419> Status = 0 0 0 0 ok 2008-Apr-28 22:28:18 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-28 22:28:18 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-28 22:28:18 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-28 22:28:18 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-28 22:28:18 LOG5 begin_task: Level: (4) ID = <10420> Status = 0 0 0 0 ok 2008-Apr-28 22:28:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 22:28:18 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-28 22:28:18 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-28 22:28:18 LOG5 end_task: Level: (4) ID = <10420> Status = 0 0 0 0 ok 2008-Apr-28 22:28:18 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-28 22:28:18 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-28 22:28:18 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-28 22:28:18 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-28 22:28:18 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-28 22:28:18 LOG5 begin_task: Level: (4) ID = <10421> Status = 0 0 0 0 ok 2008-Apr-28 22:28:18 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-28 22:28:18 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-28 22:28:18 LOG5 end_task: Level: (4) ID = <10421> Status = 0 0 0 0 ok 2008-Apr-28 22:28:18 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-28 22:28:18 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-28 22:28:18 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-28 22:28:18 LOG5 finish_task: Level: (3) ID = <10418> Status = 0 0 0 0 ok 2008-Apr-28 22:28:18 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-28 22:28:18 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 22:28:18 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-28 22:28:18 LOG5 end_task: Level: (3) ID = <10418> Status = 0 0 0 0 ok 2008-Apr-28 22:28:18 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2008-Apr-28 22:28:18 INFO2 astwait: Waiting for 28 seconds from 02:28:18 to 02:28:46 UTC ... 2008-Apr-28 22:28:18 LOG4 send_obs_status: To obs_status: <1> TASKTIME 28 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-28 22:28:18 START begin_task: Starting task 'waiting on waiting for AST time' 2008-Apr-28 22:28:18 LOG5 begin_task: Level: (3) ID = <10422> Status = 0 0 0 0 ok 2008-Apr-28 22:28:46 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2008-Apr-28 22:28:46 LOG5 end_task: Level: (3) ID = <10422> Status = 0 0 0 0 ok 2008-Apr-28 22:28:46 INFO3 astwait: Finished waiting 2008-Apr-28 22:28:46 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-28 22:28:46 LOG5 dopset_later: Calling 'dopset_later 61.426192293355008' 2008-Apr-28 22:28:46 INFO3 dopset_later: Setting Doppler correction for 22:29:46 (61.4 seconds from now) 2008-Apr-28 22:28:46 LOG5 antvel: Calling 'antvel 28.280000 12.097897 F 61.426192293355008' 2008-Apr-28 22:28:46 LOG2 antvel: Parameters to Doppler: Heliocentric 95386 2008 119 0.0 2008-Apr-28 22:28:46 INFO5 antvel: Computed antenna velocity: +18.53850 km/s 2008-Apr-28 22:28:46 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=18.538503461000001 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-28 22:28:46 INFO4 dopset_gen: New sky frequencies: 1381.158021 1381.158021 1381.158021 1381.158021 1381.158021 1381.158021 1381.158021 1381.158021 1381.158021 2008-Apr-28 22:28:46 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.158021 sky0=1381.158021 sky1=1381.158021 sky2=1381.158021 sky3=1381.158021 sky4=1381.158021 sky5=1381.158021 sky6=1381.158021 sky7=1381.158021 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-28 22:28:46 LOG2 dopset_gen: Result from 'sky2syn': 1631.158021 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-28 22:28:46 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631158021.0} 2008-Apr-28 22:28:46 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 22:28:46 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-28 22:28:46 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-28 22:28:46 INFO5 fixed_driftmap: Tracking J2000 position: RA = 12:08:03.0 Dec = +07:40:21.6 2008-Apr-28 22:28:46 LOG3 track_source: Calling 'track_source AGESVC1A_p2_054 120803.0 074021.6 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-28 22:28:46 START begin_task: Starting task 'sending tracking commands' 2008-Apr-28 22:28:46 LOG5 begin_task: Level: (3) ID = <10423> Status = 0 0 0 0 ok 2008-Apr-28 22:28:46 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_054} INFO {Slewing to source 'AGESVC1A_p2_054' ...} 2008-Apr-28 22:28:46 INFO1 track_source: Starting to track AGESVC1A_p2_054 2008-Apr-28 22:28:46 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_054" 2008-Apr-28 22:28:46 LOG3 vw_send: To DATATAKING: set ra 120803.0 2008-Apr-28 22:28:46 LOG3 vw_send: To DATATAKING: set dec 074021.6 2008-Apr-28 22:28:46 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-28 22:28:46 LOG3 vw_send: To DATATAKING: pnt tr 120803.0 074021.6 -CJ 2008-Apr-28 22:28:46 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-28 22:28:46 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-28 22:28:46 LOG5 finish_task: Level: (3) ID = <10423> Status = 0 0 0 0 ok 2008-Apr-28 22:28:46 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-28 22:28:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 22:28:46 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-28 22:28:46 LOG5 end_task: Level: (3) ID = <10423> Status = 0 0 0 0 ok 2008-Apr-28 22:28:46 START begin_task: Starting task 'waiting on telescope' 2008-Apr-28 22:28:46 LOG5 begin_task: Level: (3) ID = <10424> Status = 0 0 0 0 ok 2008-Apr-28 22:28:46 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-28 22:28:46 LOG3 waittrk: Start waittrk 5 2008-Apr-28 22:28:46 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-28 22:28:46 LOG5 begin_task: Level: (4) ID = <10425> Status = 0 0 0 0 ok 2008-Apr-28 22:28:46 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631158021.0} 2008-Apr-28 22:28:46 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 22:28:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 22:28:46 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_054" 2008-Apr-28 22:28:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 22:28:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 22:28:46 LOG4 got_cormsg: From DATATAKING: set ra 120803.0 2008-Apr-28 22:28:46 LOG4 got_cormsg: From DATATAKING: set dec 074021.6 2008-Apr-28 22:28:46 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-28 22:28:46 LOG4 got_cormsg: From DATATAKING: pnt tr 120803.0 074021.6 -CJ 2008-Apr-28 22:28:46 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-28 22:28:46 LOG4 got_cormsg: From DATATAKING: 120803.0 2008-Apr-28 22:28:46 LOG4 got_cormsg: From DATATAKING: vw% 074021.6 2008-Apr-28 22:28:46 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2008-Apr-28 22:28:51 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-28 22:28:51 LOG5 end_task: Level: (4) ID = <10425> Status = 0 0 0 0 ok 2008-Apr-28 22:28:51 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-28 22:28:51 LOG5 begin_task: Level: (4) ID = <10426> Status = 0 0 0 0 ok 2008-Apr-28 22:28:53 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-28 22:28:53 LOG5 end_task: Level: (4) ID = <10426> Status = 0 0 0 0 ok 2008-Apr-28 22:28:53 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-28 22:28:53 INFO2 waittrk: Now tracking AGESVC1A_p2_054 2008-Apr-28 22:28:53 LOG4 waittrk: Current telescope position: Az = 388.08 ZA = 12.08 2008-Apr-28 22:28:53 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-28 22:28:53 LOG5 finish_task: Level: (3) ID = <10424> Status = 0 0 0 0 ok 2008-Apr-28 22:28:53 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-28 22:28:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 22:28:53 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-28 22:28:53 LOG5 end_task: Level: (3) ID = <10424> Status = 0 0 0 0 ok 2008-Apr-28 22:28:53 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-28 22:28:53 LOG5 begin_task: Level: (3) ID = <10427> Status = 0 0 0 0 ok 2008-Apr-28 22:28:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-28 22:28:53 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-28 22:28:53 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-28 22:28:53 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-28 22:28:53 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 22:28:53 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-28 22:28:53 LOG5 begin_task: Level: (4) ID = <10428> Status = 0 0 0 0 ok 2008-Apr-28 22:28:53 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-28 22:28:53 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 22:28:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 22:28:54 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-28 22:28:54 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-28 22:28:54 LOG5 end_task: Level: (4) ID = <10428> Status = 0 0 0 0 ok 2008-Apr-28 22:28:54 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-28 22:28:54 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-28 22:28:54 LOG5 begin_task: Level: (4) ID = <10429> Status = 0 0 0 0 ok 2008-Apr-28 22:28:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-28 22:28:54 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-28 22:28:54 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-28 22:28:54 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-28 22:28:54 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-28 22:28:54 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-28 22:28:54 LOG5 begin_task: Level: (5) ID = <10430> Status = 0 0 0 0 ok 2008-Apr-28 22:28:54 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-28 22:28:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 22:28:54 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 1 dB --- beam 1: 8 6 dB 2008-Apr-28 22:28:54 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-28 22:28:54 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 6 dB 2008-Apr-28 22:28:54 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 3 3 dB 2008-Apr-28 22:28:54 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-28 22:28:54 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-28 22:28:54 LOG5 end_task: Level: (5) ID = <10430> Status = 0 0 0 0 ok 2008-Apr-28 22:28:54 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.878 0.980 ALFA beam 1: 0.885 1.071 2008-Apr-28 22:28:54 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.034 0.948 ALFA beam 3: 0.991 1.056 2008-Apr-28 22:28:54 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.939 0.964 ALFA beam 5: 1.036 0.898 2008-Apr-28 22:28:54 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.055 1.052 ALFA beam 7: 0.921 0.937 2008-Apr-28 22:28:54 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-28 22:28:54 LOG5 finish_task: Level: (4) ID = <10429> Status = 0 0 0 0 ok 2008-Apr-28 22:28:54 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-28 22:28:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 22:28:54 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-28 22:28:54 LOG5 end_task: Level: (4) ID = <10429> Status = 0 0 0 0 ok 2008-Apr-28 22:28:54 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-28 22:28:54 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-28 22:28:54 LOG5 finish_task: Level: (3) ID = <10427> Status = 0 0 0 0 ok 2008-Apr-28 22:28:54 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-28 22:28:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 22:28:54 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-28 22:28:54 LOG5 end_task: Level: (3) ID = <10427> Status = 0 0 0 0 ok 2008-Apr-28 22:28:54 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Steve Schnei 2008-Apr-28 22:28:54 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Steve Schnei 2008-Apr-28 22:28:55 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Steve Schnei 2008-Apr-28 22:28:55 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Steve Schnei 2008-Apr-28 22:28:55 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-28 22:28:55 START begin_task: Starting task 'WAPP calibration' 2008-Apr-28 22:28:55 LOG5 begin_task: Level: (3) ID = <10431> Status = 0 0 0 0 ok 2008-Apr-28 22:28:55 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-28 22:28:55 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-28 22:28:55 START begin_task: Starting task 'selecting calibration type' 2008-Apr-28 22:28:55 LOG5 begin_task: Level: (4) ID = <10432> Status = 0 0 0 0 ok 2008-Apr-28 22:28:55 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-28 22:28:55 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-28 22:28:55 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 22:28:55 START begin_task: Starting task 'waiting on setcal' 2008-Apr-28 22:28:55 LOG5 begin_task: Level: (5) ID = <10433> Status = 0 0 0 0 ok 2008-Apr-28 22:28:55 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Steve Schnei' 2008-Apr-28 22:28:55 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-28 22:28:55 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 22:28:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 22:28:55 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-28 22:28:55 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-28 22:28:55 LOG5 end_task: Level: (5) ID = <10433> Status = 0 0 0 0 ok 2008-Apr-28 22:28:55 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-28 22:28:55 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-28 22:28:55 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-28 22:28:55 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-28 22:28:55 LOG5 begin_task: Level: (5) ID = <10434> Status = 0 0 0 0 ok 2008-Apr-28 22:28:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 22:28:55 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-28 22:28:55 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-28 22:28:55 LOG5 end_task: Level: (5) ID = <10434> Status = 0 0 0 0 ok 2008-Apr-28 22:28:55 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-28 22:28:55 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-28 22:28:55 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-28 22:28:55 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-28 22:28:55 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-28 22:28:55 LOG5 begin_task: Level: (5) ID = <10435> Status = 0 0 0 0 ok 2008-Apr-28 22:28:55 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-28 22:28:55 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-28 22:28:55 LOG5 end_task: Level: (5) ID = <10435> Status = 0 0 0 0 ok 2008-Apr-28 22:28:55 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-28 22:28:55 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-28 22:28:55 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-28 22:28:55 LOG5 finish_task: Level: (4) ID = <10432> Status = 0 0 0 0 ok 2008-Apr-28 22:28:55 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-28 22:28:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 22:28:55 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-28 22:28:55 LOG5 end_task: Level: (4) ID = <10432> Status = 0 0 0 0 ok 2008-Apr-28 22:28:55 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-28 22:28:55 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-28 22:28:55 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-28 22:28:55 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-28 22:28:55 LOG5 begin_task: Level: (4) ID = <10436> Status = 0 0 0 0 ok 2008-Apr-28 22:28:55 NOTE WAPPDATA-new_file: New FITS file: wapp.20080428.a2048.0010.fits 2008-Apr-28 22:28:55 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-28 22:28:55 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080428.a2048.0010.fits} 2008-Apr-28 22:28:55 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-28 22:28:55 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-28 22:28:55 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-28 22:28:55 LOG5 end_task: Level: (4) ID = <10436> Status = 0 0 0 0 ok 2008-Apr-28 22:28:55 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-28 22:28:55 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-28 22:28:55 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-28 22:28:55 LOG5 begin_task: Level: (4) ID = <10437> Status = 0 0 0 0 ok 2008-Apr-28 22:28:55 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-28 22:28:56 LOG5 log_alfabeam: Parameters: 12.134166666666665 7.672666666666669 12.526533 2008.3283689190559 -4.500080 2008-Apr-28 22:28:56 LOG4 log_alfabeam: ALFABEAM 0 12.134166666666667 7.672666666666669 2008-Apr-28 22:28:56 LOG4 log_alfabeam: ALFABEAM 1 12.133785503670664 7.774435728145264 2008-Apr-28 22:28:56 LOG4 log_alfabeam: ALFABEAM 2 12.128459578606140 7.707046548923766 2008-Apr-28 22:28:56 LOG4 log_alfabeam: ALFABEAM 3 12.128844259025445 7.605074351001892 2008-Apr-28 22:28:56 LOG4 log_alfabeam: ALFABEAM 4 12.134598650709595 7.570754341801167 2008-Apr-28 22:28:56 LOG4 log_alfabeam: ALFABEAM 5 12.139886106136855 7.638927560277672 2008-Apr-28 22:28:56 LOG4 log_alfabeam: ALFABEAM 6 12.139457719228998 7.740637212902150 2008-Apr-28 22:28:56 INFO2 take_spectra: Starting WAPP scan: 811900116 2008-Apr-28 22:28:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-28 22:28:56 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-28 22:28:56 LOG5 begin_task: Level: (5) ID = <10438> Status = 0 0 0 0 ok 2008-Apr-28 22:28:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-28 22:28:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8937.00 2008-Apr-28 22:29:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.158021 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-28 22:29:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.158021 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 22:29:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.158021 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 22:29:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.158021 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 22:29:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.158021 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 22:29:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.158021 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-28 22:29:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.158021 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-28 22:29:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.158021 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-28 22:29:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.158021 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-28 22:29:02 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-28 22:29:02 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-28 22:29:02 LOG5 end_task: Level: (5) ID = <10438> Status = 0 0 0 0 ok 2008-Apr-28 22:29:02 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-28 22:29:02 LOG5 end_task: Level: (4) ID = <10437> Status = 0 0 0 0 ok 2008-Apr-28 22:29:02 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-28 22:29:02 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-28 22:29:02 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-28 22:29:02 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-28 22:29:02 LOG5 begin_task: Level: (4) ID = <10439> Status = 0 0 0 0 ok 2008-Apr-28 22:29:02 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-28 22:29:02 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-28 22:29:02 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-28 22:29:02 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-28 22:29:02 LOG5 end_task: Level: (4) ID = <10439> Status = 0 0 0 0 ok 2008-Apr-28 22:29:02 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-28 22:29:02 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-28 22:29:02 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-28 22:29:02 LOG5 begin_task: Level: (4) ID = <10440> Status = 0 0 0 0 ok 2008-Apr-28 22:29:02 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-28 22:29:02 LOG5 log_alfabeam: Parameters: 12.134166666666665 7.672666666666669 12.528483 2008.3283691408726 -4.500080 2008-Apr-28 22:29:02 LOG4 log_alfabeam: ALFABEAM 0 12.134166666666667 7.672666666666673 2008-Apr-28 22:29:02 LOG4 log_alfabeam: ALFABEAM 1 12.133799370515808 7.774447099365598 2008-Apr-28 22:29:02 LOG4 log_alfabeam: ALFABEAM 2 12.128464274763255 7.707218262028511 2008-Apr-28 22:29:02 LOG4 log_alfabeam: ALFABEAM 3 12.128835062669532 7.605234817130399 2008-Apr-28 22:29:02 LOG4 log_alfabeam: ALFABEAM 4 12.134584713502916 7.570741600511369 2008-Apr-28 22:29:02 LOG4 log_alfabeam: ALFABEAM 5 12.139881480834708 7.638754734085475 2008-Apr-28 22:29:02 LOG4 log_alfabeam: ALFABEAM 6 12.139467005321800 7.740477248876976 2008-Apr-28 22:29:02 INFO2 take_spectra: Starting WAPP scan: 811900117 2008-Apr-28 22:29:03 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-28 22:29:03 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-28 22:29:03 LOG5 begin_task: Level: (5) ID = <10441> Status = 0 0 0 0 ok 2008-Apr-28 22:29:03 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-28 22:29:03 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8944.00 2008-Apr-28 22:29:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.468 > 1.4)! 2008-Apr-28 22:29:08 LOG4 check_wapp_levels: WAPP-1 power levels: 1.235 1.251 1.197 1.450 2008-Apr-28 22:29:08 LOG4 check_wapp_levels: WAPP-2 power levels: 1.408 1.310 1.373 1.448 2008-Apr-28 22:29:08 LOG4 check_wapp_levels: WAPP-3 power levels: 1.312 1.346 1.443 1.210 2008-Apr-28 22:29:08 LOG4 check_wapp_levels: WAPP-4 power levels: 1.468 1.459 1.278 1.297 2008-Apr-28 22:29:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.158021 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-28 22:29:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.158021 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 22:29:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.158021 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 22:29:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.158021 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 22:29:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.158021 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 22:29:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.158021 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-28 22:29:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.158021 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-28 22:29:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.158021 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-28 22:29:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.158021 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-28 22:29:09 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-28 22:29:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-28 22:29:09 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-28 22:29:09 LOG5 end_task: Level: (5) ID = <10441> Status = 0 0 0 0 ok 2008-Apr-28 22:29:09 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-28 22:29:09 LOG5 end_task: Level: (4) ID = <10440> Status = 0 0 0 0 ok 2008-Apr-28 22:29:09 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-28 22:29:09 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-28 22:29:09 LOG5 finish_task: Level: (3) ID = <10431> Status = 0 0 0 0 ok 2008-Apr-28 22:29:09 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-28 22:29:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 22:29:09 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-28 22:29:09 LOG5 end_task: Level: (3) ID = <10431> Status = 0 0 0 0 ok 2008-Apr-28 22:29:09 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-28 22:29:09 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 28.28 and ZA = 12.10 2008-Apr-28 22:29:09 LOG3 track_source: Calling 'track_source AGESVC1A_p2_054 28.28 12.0978968209 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-28 22:29:09 START begin_task: Starting task 'sending tracking commands' 2008-Apr-28 22:29:09 LOG5 begin_task: Level: (3) ID = <10442> Status = 0 0 0 0 ok 2008-Apr-28 22:29:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_054} INFO {Slewing to source 'AGESVC1A_p2_054' ...} 2008-Apr-28 22:29:09 INFO1 track_source: Starting to track AGESVC1A_p2_054 2008-Apr-28 22:29:09 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_054" 2008-Apr-28 22:29:09 LOG3 vw_send: To DATATAKING: set ra 28.28 2008-Apr-28 22:29:09 LOG3 vw_send: To DATATAKING: set dec 12.0978968209 2008-Apr-28 22:29:09 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-28 22:29:09 LOG3 vw_send: To DATATAKING: pnt tr 28.28 12.0978968209 -CF 2008-Apr-28 22:29:09 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-28 22:29:09 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-28 22:29:09 LOG5 finish_task: Level: (3) ID = <10442> Status = 0 0 0 0 ok 2008-Apr-28 22:29:09 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-28 22:29:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 22:29:10 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-28 22:29:10 LOG5 end_task: Level: (3) ID = <10442> Status = 0 0 0 0 ok 2008-Apr-28 22:29:10 LOG1 fixed_driftmap: Parameters: HA = +00:22:59.9 Start = 12:32:27.1 LST = 12:31:49.6 diff = 37.5 secs 2008-Apr-28 22:29:10 INFO2 fixed_driftmap: Waiting 35.5 seconds for RA 12:09:27 2008-Apr-28 22:29:10 INFO2 lstwait: Waiting for 35.4 secs from LST 12:31:50 to LST 12:32:25 ... 2008-Apr-28 22:29:10 LOG4 send_obs_status: To obs_status: <1> TASKTIME 35.431362899757701 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-28 22:29:10 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-28 22:29:10 LOG5 begin_task: Level: (3) ID = <10443> Status = 0 0 0 0 ok 2008-Apr-28 22:29:10 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_054" 2008-Apr-28 22:29:10 LOG4 got_cormsg: From DATATAKING: set ra 28.28 2008-Apr-28 22:29:10 LOG4 got_cormsg: From DATATAKING: set dec 12.0978968209 2008-Apr-28 22:29:10 LOG4 got_cormsg: From DATATAKING: vw% 28.28 2008-Apr-28 22:29:10 LOG4 got_cormsg: From DATATAKING: vw% 12.0978968209 2008-Apr-28 22:29:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 22:29:10 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-28 22:29:10 LOG4 got_cormsg: From DATATAKING: pnt tr 28.28 12.0978968209 -CF 2008-Apr-28 22:29:10 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-28 22:29:10 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-28 22:29:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 22:29:14 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.888 and 1.072 2008-Apr-28 22:29:45 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-28 22:29:45 LOG5 end_task: Level: (3) ID = <10443> Status = 0 0 0 0 ok 2008-Apr-28 22:29:45 LOG4 lstwait: Finished waiting, the gui caused difference: 0.57243043999619658 2008-Apr-28 22:29:45 INFO3 lstwait: Finished waiting 2008-Apr-28 22:29:45 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-28 22:29:45 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-28 22:29:45 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-28 22:29:45 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-28 22:29:45 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-28 22:29:45 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-28 22:29:45 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-28 22:29:45 LOG5 begin_task: Level: (3) ID = <10444> Status = 0 0 0 0 ok 2008-Apr-28 22:29:45 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-28 22:29:45 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-28 22:29:45 INFO2 take_spectra: Starting WAPP scan: 811900118 2008-Apr-28 22:29:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-28 22:29:46 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-28 22:29:46 LOG5 begin_task: Level: (4) ID = <10445> Status = 0 0 0 0 ok 2008-Apr-28 22:29:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-28 22:29:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8987.00 2008-Apr-28 22:29:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.158021 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-28 22:29:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.158021 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 22:29:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.158021 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 22:29:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.158021 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 22:29:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.158021 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 22:29:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.158021 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-28 22:29:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.158021 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-28 22:29:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.158021 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-28 22:29:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.158021 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-28 22:49:47 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-28 22:49:47 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-28 22:49:47 LOG5 end_task: Level: (4) ID = <10445> Status = 0 0 0 0 ok 2008-Apr-28 22:49:47 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-28 22:49:47 LOG5 end_task: Level: (3) ID = <10444> Status = 0 0 0 0 ok 2008-Apr-28 22:49:47 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-28 22:49:47 LOG5 finish_task: Level: (2) ID = <10411> Status = 0 0 0 0 ok 2008-Apr-28 22:49:47 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-28 22:49:47 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-28 22:49:47 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-28 22:49:47 LOG5 end_task: Level: (2) ID = <10411> Status = 0 0 0 0 ok 2008-Apr-28 22:49:47 COMMAND run_command_line: EXECUTING command 47: 'FIXEDDRIFT az=47.56 alfaangle=-21.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_056 ra=120900.00 dec=73730.00' 2008-Apr-28 22:49:47 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-28 22:49:48 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-28 22:49:48 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 47.56 -21.4 hcorcal 5 tracking no first 1 AGESVC1A_p2_056 120900.00 73730.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-28 22:49:48 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-28 22:49:48 LOG5 begin_task: Level: (2) ID = <10446> Status = 0 0 0 0 ok 2008-Apr-28 22:49:48 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGESVC1A_p2_054' 2008-Apr-28 22:49:48 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-28 22:49:48 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1A_p2_056} 2008-Apr-28 22:49:48 INFO3 fixed_driftmap: Sending telescope to Az = 47.56 and ZA = 15.53 2008-Apr-28 22:49:48 LOG3 track_source: Calling 'track_source AGESVC1A_p2_056 47.56 15.5344083525 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-28 22:49:48 START begin_task: Starting task 'sending tracking commands' 2008-Apr-28 22:49:48 LOG5 begin_task: Level: (3) ID = <10447> Status = 0 0 0 0 ok 2008-Apr-28 22:49:48 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_056} INFO {Slewing to source 'AGESVC1A_p2_056' ...} 2008-Apr-28 22:49:48 INFO1 track_source: Starting to track AGESVC1A_p2_056 2008-Apr-28 22:49:48 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_056" 2008-Apr-28 22:49:48 LOG3 vw_send: To DATATAKING: set ra 47.56 2008-Apr-28 22:49:48 LOG3 vw_send: To DATATAKING: set dec 15.5344083525 2008-Apr-28 22:49:48 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-28 22:49:48 LOG3 vw_send: To DATATAKING: pnt tr 47.56 15.5344083525 -CF 2008-Apr-28 22:49:48 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-28 22:49:48 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-28 22:49:48 LOG5 finish_task: Level: (3) ID = <10447> Status = 0 0 0 0 ok 2008-Apr-28 22:49:48 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-28 22:49:48 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 22:49:48 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-28 22:49:48 LOG5 end_task: Level: (3) ID = <10447> Status = 0 0 0 0 ok 2008-Apr-28 22:49:48 START begin_task: Starting task 'rotate ALFA to -21.4 degrees' 2008-Apr-28 22:49:48 LOG5 begin_task: Level: (3) ID = <10448> Status = 0 0 0 0 ok 2008-Apr-28 22:49:48 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -21.4 degrees ...} 2008-Apr-28 22:49:48 INFO2 rotate_alfa: ALFA commanded to -21.4 degrees 2008-Apr-28 22:49:48 LOG3 sock_errsend: To ALFAMOTOR: POSITION -21.4 REPLY 2008-Apr-28 22:49:48 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-28 22:49:48 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-28 22:49:48 LOG5 begin_task: Level: (4) ID = <10449> Status = 0 0 0 0 ok 2008-Apr-28 22:49:48 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_056" 2008-Apr-28 22:49:48 LOG4 got_cormsg: From DATATAKING: set ra 47.56 2008-Apr-28 22:49:48 LOG4 got_cormsg: From DATATAKING: set dec 15.5344083525 2008-Apr-28 22:49:48 LOG4 got_cormsg: From DATATAKING: vw% 47.56 2008-Apr-28 22:49:48 LOG4 got_cormsg: From DATATAKING: vw% 15.5344083525 2008-Apr-28 22:49:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 22:49:48 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-28 22:49:48 LOG4 got_cormsg: From DATATAKING: pnt tr 47.56 15.5344083525 -CF 2008-Apr-28 22:49:48 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-28 22:49:48 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-28 22:49:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 22:49:59 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-28 22:49:59 INFO3 alfa_motor: ALFA rotator in-position -21.40 degrees 2008-Apr-28 22:49:59 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-28 22:49:59 LOG5 end_task: Level: (4) ID = <10449> Status = 0 0 0 0 ok 2008-Apr-28 22:49:59 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-28 22:49:59 STOP finish_task: Finishing task 'rotate ALFA to -21.4 degrees' 2008-Apr-28 22:49:59 LOG5 finish_task: Level: (3) ID = <10448> Status = 0 0 0 0 ok 2008-Apr-28 22:49:59 INFO2 finish_task: DONE finished configuration: rotating ALFA to -21.4 degrees 2008-Apr-28 22:49:59 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 22:49:59 STOP end_task: Finishing task 'rotate ALFA to -21.4 degrees' with status 'OK' 2008-Apr-28 22:49:59 LOG5 end_task: Level: (3) ID = <10448> Status = 0 0 0 0 ok 2008-Apr-28 22:49:59 START begin_task: Starting task 'waiting on telescope' 2008-Apr-28 22:49:59 LOG5 begin_task: Level: (3) ID = <10450> Status = 0 0 0 0 ok 2008-Apr-28 22:49:59 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-28 22:49:59 LOG3 waittrk: Start waittrk 5 2008-Apr-28 22:49:59 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-28 22:49:59 LOG5 begin_task: Level: (4) ID = <10451> Status = 0 0 0 0 ok 2008-Apr-28 22:50:04 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-28 22:50:04 LOG5 end_task: Level: (4) ID = <10451> Status = 0 0 0 0 ok 2008-Apr-28 22:50:04 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-28 22:50:04 LOG5 begin_task: Level: (4) ID = <10452> Status = 0 0 0 0 ok 2008-Apr-28 22:51:21 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-28 22:51:21 LOG5 end_task: Level: (4) ID = <10452> Status = 0 0 0 0 ok 2008-Apr-28 22:51:21 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-28 22:51:21 INFO2 waittrk: Now tracking AGESVC1A_p2_056 2008-Apr-28 22:51:21 LOG4 waittrk: Current telescope position: Az = 407.34 ZA = 15.52 2008-Apr-28 22:51:21 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-28 22:51:21 LOG5 finish_task: Level: (3) ID = <10450> Status = 0 0 0 0 ok 2008-Apr-28 22:51:21 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-28 22:51:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 22:51:21 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-28 22:51:21 LOG5 end_task: Level: (3) ID = <10450> Status = 0 0 0 0 ok 2008-Apr-28 22:51:21 START begin_task: Starting task 'selecting calibration type' 2008-Apr-28 22:51:21 LOG5 begin_task: Level: (3) ID = <10453> Status = 0 0 0 0 ok 2008-Apr-28 22:51:21 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-28 22:51:21 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-28 22:51:21 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 22:51:21 START begin_task: Starting task 'waiting on setcal' 2008-Apr-28 22:51:21 LOG5 begin_task: Level: (4) ID = <10454> Status = 0 0 0 0 ok 2008-Apr-28 22:51:21 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-28 22:51:21 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 22:51:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 22:51:22 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-28 22:51:22 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-28 22:51:22 LOG5 end_task: Level: (4) ID = <10454> Status = 0 0 0 0 ok 2008-Apr-28 22:51:22 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-28 22:51:22 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-28 22:51:22 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-28 22:51:22 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-28 22:51:22 LOG5 begin_task: Level: (4) ID = <10455> Status = 0 0 0 0 ok 2008-Apr-28 22:51:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 22:51:22 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-28 22:51:22 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-28 22:51:22 LOG5 end_task: Level: (4) ID = <10455> Status = 0 0 0 0 ok 2008-Apr-28 22:51:22 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-28 22:51:22 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-28 22:51:22 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-28 22:51:23 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-28 22:51:23 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-28 22:51:23 LOG5 begin_task: Level: (4) ID = <10456> Status = 0 0 0 0 ok 2008-Apr-28 22:51:23 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-28 22:51:23 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-28 22:51:23 LOG5 end_task: Level: (4) ID = <10456> Status = 0 0 0 0 ok 2008-Apr-28 22:51:23 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-28 22:51:23 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-28 22:51:23 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-28 22:51:23 LOG5 finish_task: Level: (3) ID = <10453> Status = 0 0 0 0 ok 2008-Apr-28 22:51:23 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-28 22:51:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 22:51:23 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-28 22:51:23 LOG5 end_task: Level: (3) ID = <10453> Status = 0 0 0 0 ok 2008-Apr-28 22:51:23 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2008-Apr-28 22:51:23 INFO2 astwait: Waiting for 20 seconds from 02:51:23 to 02:51:43 UTC ... 2008-Apr-28 22:51:23 LOG4 send_obs_status: To obs_status: <1> TASKTIME 20 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-28 22:51:23 START begin_task: Starting task 'waiting on waiting for AST time' 2008-Apr-28 22:51:23 LOG5 begin_task: Level: (3) ID = <10457> Status = 0 0 0 0 ok 2008-Apr-28 22:51:43 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2008-Apr-28 22:51:43 LOG5 end_task: Level: (3) ID = <10457> Status = 0 0 0 0 ok 2008-Apr-28 22:51:43 INFO3 astwait: Finished waiting 2008-Apr-28 22:51:43 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-28 22:51:43 LOG5 dopset_later: Calling 'dopset_later 60.977740498533635' 2008-Apr-28 22:51:43 INFO3 dopset_later: Setting Doppler correction for 22:52:43 (61 seconds from now) 2008-Apr-28 22:51:43 LOG5 antvel: Calling 'antvel 47.560000 15.534408 F 60.977740498533635' 2008-Apr-28 22:51:43 LOG2 antvel: Parameters to Doppler: Heliocentric 96763 2008 119 0.0 2008-Apr-28 22:51:43 INFO5 antvel: Computed antenna velocity: +18.58211 km/s 2008-Apr-28 22:51:43 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=18.5821093532 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-28 22:51:43 INFO4 dopset_gen: New sky frequencies: 1381.157820 1381.157820 1381.157820 1381.157820 1381.157820 1381.157820 1381.157820 1381.157820 1381.157820 2008-Apr-28 22:51:43 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.157820 sky0=1381.157820 sky1=1381.157820 sky2=1381.157820 sky3=1381.157820 sky4=1381.157820 sky5=1381.157820 sky6=1381.157820 sky7=1381.157820 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-28 22:51:43 LOG2 dopset_gen: Result from 'sky2syn': 1631.157820 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-28 22:51:43 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631157820.0} 2008-Apr-28 22:51:43 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 22:51:43 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-28 22:51:43 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-28 22:51:43 INFO5 fixed_driftmap: Tracking J2000 position: RA = 12:08:03.5 Dec = +07:37:21.6 2008-Apr-28 22:51:43 LOG3 track_source: Calling 'track_source AGESVC1A_p2_056 120803.5 073721.6 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-28 22:51:43 START begin_task: Starting task 'sending tracking commands' 2008-Apr-28 22:51:43 LOG5 begin_task: Level: (3) ID = <10458> Status = 0 0 0 0 ok 2008-Apr-28 22:51:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_056} INFO {Slewing to source 'AGESVC1A_p2_056' ...} 2008-Apr-28 22:51:43 INFO1 track_source: Starting to track AGESVC1A_p2_056 2008-Apr-28 22:51:43 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_056" 2008-Apr-28 22:51:43 LOG3 vw_send: To DATATAKING: set ra 120803.5 2008-Apr-28 22:51:43 LOG3 vw_send: To DATATAKING: set dec 073721.6 2008-Apr-28 22:51:43 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-28 22:51:43 LOG3 vw_send: To DATATAKING: pnt tr 120803.5 073721.6 -CJ 2008-Apr-28 22:51:43 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-28 22:51:43 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-28 22:51:43 LOG5 finish_task: Level: (3) ID = <10458> Status = 0 0 0 0 ok 2008-Apr-28 22:51:43 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-28 22:51:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 22:51:43 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-28 22:51:43 LOG5 end_task: Level: (3) ID = <10458> Status = 0 0 0 0 ok 2008-Apr-28 22:51:43 START begin_task: Starting task 'waiting on telescope' 2008-Apr-28 22:51:43 LOG5 begin_task: Level: (3) ID = <10459> Status = 0 0 0 0 ok 2008-Apr-28 22:51:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-28 22:51:43 LOG3 waittrk: Start waittrk 5 2008-Apr-28 22:51:43 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-28 22:51:43 LOG5 begin_task: Level: (4) ID = <10460> Status = 0 0 0 0 ok 2008-Apr-28 22:51:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631157820.0} 2008-Apr-28 22:51:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 22:51:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 22:51:43 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_056" 2008-Apr-28 22:51:43 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-28 22:51:43 LOG4 got_cormsg: From DATATAKING: set ra 120803.5 2008-Apr-28 22:51:43 LOG4 got_cormsg: From DATATAKING: set dec 073721.6 2008-Apr-28 22:51:43 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-28 22:51:43 LOG4 got_cormsg: From DATATAKING: pnt tr 120803.5 073721.6 -CJ 2008-Apr-28 22:51:43 LOG4 got_cormsg: From DATATAKING: 120803.5 2008-Apr-28 22:51:43 LOG4 got_cormsg: From DATATAKING: vw% 073721.6 2008-Apr-28 22:51:43 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2008-Apr-28 22:51:43 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-28 22:51:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 22:51:48 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-28 22:51:48 LOG5 end_task: Level: (4) ID = <10460> Status = 0 0 0 0 ok 2008-Apr-28 22:51:48 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-28 22:51:48 LOG5 begin_task: Level: (4) ID = <10461> Status = 0 0 0 0 ok 2008-Apr-28 22:51:50 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-28 22:51:50 LOG5 end_task: Level: (4) ID = <10461> Status = 0 0 0 0 ok 2008-Apr-28 22:51:50 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-28 22:51:50 INFO2 waittrk: Now tracking AGESVC1A_p2_056 2008-Apr-28 22:51:50 LOG4 waittrk: Current telescope position: Az = 407.37 ZA = 15.54 2008-Apr-28 22:51:50 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-28 22:51:50 LOG5 finish_task: Level: (3) ID = <10459> Status = 0 0 0 0 ok 2008-Apr-28 22:51:50 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-28 22:51:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 22:51:50 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-28 22:51:50 LOG5 end_task: Level: (3) ID = <10459> Status = 0 0 0 0 ok 2008-Apr-28 22:51:50 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-28 22:51:50 LOG5 begin_task: Level: (3) ID = <10462> Status = 0 0 0 0 ok 2008-Apr-28 22:51:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-28 22:51:50 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-28 22:51:50 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-28 22:51:50 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-28 22:51:50 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 22:51:50 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-28 22:51:50 LOG5 begin_task: Level: (4) ID = <10463> Status = 0 0 0 0 ok 2008-Apr-28 22:51:50 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-28 22:51:50 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 22:51:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 22:51:51 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-28 22:51:51 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-28 22:51:51 LOG5 end_task: Level: (4) ID = <10463> Status = 0 0 0 0 ok 2008-Apr-28 22:51:51 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-28 22:51:51 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-28 22:51:51 LOG5 begin_task: Level: (4) ID = <10464> Status = 0 0 0 0 ok 2008-Apr-28 22:51:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-28 22:51:51 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-28 22:51:51 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-28 22:51:51 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-28 22:51:51 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-28 22:51:51 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-28 22:51:51 LOG5 begin_task: Level: (5) ID = <10465> Status = 0 0 0 0 ok 2008-Apr-28 22:51:51 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-28 22:51:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 22:51:51 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 1 dB --- beam 1: 8 6 dB 2008-Apr-28 22:51:51 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-28 22:51:51 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 6 dB 2008-Apr-28 22:51:51 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 3 3 dB 2008-Apr-28 22:51:51 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-28 22:51:51 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-28 22:51:51 LOG5 end_task: Level: (5) ID = <10465> Status = 0 0 0 0 ok 2008-Apr-28 22:51:51 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.929 0.987 ALFA beam 1: 0.893 1.069 2008-Apr-28 22:51:51 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.061 0.977 ALFA beam 3: 1.049 1.104 2008-Apr-28 22:51:51 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.974 1.009 ALFA beam 5: 1.082 0.935 2008-Apr-28 22:51:51 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.099 1.085 ALFA beam 7: 0.957 0.964 2008-Apr-28 22:51:51 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-28 22:51:51 LOG5 finish_task: Level: (4) ID = <10464> Status = 0 0 0 0 ok 2008-Apr-28 22:51:51 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-28 22:51:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 22:51:51 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-28 22:51:51 LOG5 end_task: Level: (4) ID = <10464> Status = 0 0 0 0 ok 2008-Apr-28 22:51:51 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-28 22:51:51 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-28 22:51:51 LOG5 finish_task: Level: (3) ID = <10462> Status = 0 0 0 0 ok 2008-Apr-28 22:51:51 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-28 22:51:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 22:51:51 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-28 22:51:51 LOG5 end_task: Level: (3) ID = <10462> Status = 0 0 0 0 ok 2008-Apr-28 22:51:51 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Steve Schnei 2008-Apr-28 22:51:51 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Steve Schnei 2008-Apr-28 22:51:51 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Steve Schnei 2008-Apr-28 22:51:51 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Steve Schnei 2008-Apr-28 22:51:52 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-28 22:51:52 START begin_task: Starting task 'WAPP calibration' 2008-Apr-28 22:51:52 LOG5 begin_task: Level: (3) ID = <10466> Status = 0 0 0 0 ok 2008-Apr-28 22:51:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-28 22:51:52 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-28 22:51:52 START begin_task: Starting task 'selecting calibration type' 2008-Apr-28 22:51:52 LOG5 begin_task: Level: (4) ID = <10467> Status = 0 0 0 0 ok 2008-Apr-28 22:51:52 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-28 22:51:52 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-28 22:51:52 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 22:51:52 START begin_task: Starting task 'waiting on setcal' 2008-Apr-28 22:51:52 LOG5 begin_task: Level: (5) ID = <10468> Status = 0 0 0 0 ok 2008-Apr-28 22:51:52 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Steve Schnei' 2008-Apr-28 22:51:52 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-28 22:51:52 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 22:51:52 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 22:51:52 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-28 22:51:52 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-28 22:51:52 LOG5 end_task: Level: (5) ID = <10468> Status = 0 0 0 0 ok 2008-Apr-28 22:51:52 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-28 22:51:52 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-28 22:51:52 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-28 22:51:52 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-28 22:51:52 LOG5 begin_task: Level: (5) ID = <10469> Status = 0 0 0 0 ok 2008-Apr-28 22:51:52 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 22:51:52 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-28 22:51:52 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-28 22:51:52 LOG5 end_task: Level: (5) ID = <10469> Status = 0 0 0 0 ok 2008-Apr-28 22:51:52 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-28 22:51:52 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-28 22:51:52 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-28 22:51:52 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-28 22:51:52 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-28 22:51:52 LOG5 begin_task: Level: (5) ID = <10470> Status = 0 0 0 0 ok 2008-Apr-28 22:51:52 NOTE WAPPDATA-new_file: New FITS file: wapp.20080428.a2048.0011.fits 2008-Apr-28 22:51:52 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-28 22:51:52 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-28 22:51:52 LOG5 end_task: Level: (5) ID = <10470> Status = 0 0 0 0 ok 2008-Apr-28 22:51:52 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-28 22:51:52 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-28 22:51:52 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-28 22:51:52 LOG5 finish_task: Level: (4) ID = <10467> Status = 0 0 0 0 ok 2008-Apr-28 22:51:52 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-28 22:51:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 22:51:52 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-28 22:51:52 LOG5 end_task: Level: (4) ID = <10467> Status = 0 0 0 0 ok 2008-Apr-28 22:51:52 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-28 22:51:52 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-28 22:51:52 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-28 22:51:52 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-28 22:51:52 LOG5 begin_task: Level: (4) ID = <10471> Status = 0 0 0 0 ok 2008-Apr-28 22:51:52 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080428.a2048.0011.fits} 2008-Apr-28 22:51:52 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-28 22:51:52 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-28 22:51:52 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-28 22:51:52 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-28 22:51:52 LOG5 end_task: Level: (4) ID = <10471> Status = 0 0 0 0 ok 2008-Apr-28 22:51:52 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-28 22:51:52 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-28 22:51:52 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-28 22:51:52 LOG5 begin_task: Level: (4) ID = <10472> Status = 0 0 0 0 ok 2008-Apr-28 22:51:52 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-28 22:51:52 LOG5 log_alfabeam: Parameters: 12.134305555555555 7.6226666666666691 12.910080 2008.3284125535529 -21.400078 2008-Apr-28 22:51:52 LOG4 log_alfabeam: ALFABEAM 0 12.134305555555553 7.622666666666663 2008-Apr-28 22:51:52 LOG4 log_alfabeam: ALFABEAM 1 12.134098382371471 7.720138972295502 2008-Apr-28 22:51:52 LOG4 log_alfabeam: ALFABEAM 2 12.128408576650761 7.655668938760141 2008-Apr-28 22:51:52 LOG4 log_alfabeam: ALFABEAM 3 12.128633784213770 7.557859467931232 2008-Apr-28 22:51:52 LOG4 log_alfabeam: ALFABEAM 4 12.134556188397926 7.524998691499526 2008-Apr-28 22:51:52 LOG4 log_alfabeam: ALFABEAM 5 12.140203498925569 7.590261247292196 2008-Apr-28 22:51:52 LOG4 log_alfabeam: ALFABEAM 6 12.139971008855374 7.687593451724644 2008-Apr-28 22:51:52 INFO2 take_spectra: Starting WAPP scan: 811900119 2008-Apr-28 22:51:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-28 22:51:53 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-28 22:51:53 LOG5 begin_task: Level: (5) ID = <10473> Status = 0 0 0 0 ok 2008-Apr-28 22:51:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-28 22:51:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10314.00 2008-Apr-28 22:51:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.157820 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-28 22:51:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.157820 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 22:51:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.157820 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 22:51:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.157820 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 22:51:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.157820 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 22:51:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.157820 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-28 22:51:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.157820 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-28 22:51:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.157820 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-28 22:51:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.157820 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-28 22:51:59 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-28 22:51:59 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-28 22:51:59 LOG5 end_task: Level: (5) ID = <10473> Status = 0 0 0 0 ok 2008-Apr-28 22:51:59 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-28 22:51:59 LOG5 end_task: Level: (4) ID = <10472> Status = 0 0 0 0 ok 2008-Apr-28 22:51:59 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-28 22:51:59 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-28 22:51:59 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-28 22:51:59 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-28 22:51:59 LOG5 begin_task: Level: (4) ID = <10474> Status = 0 0 0 0 ok 2008-Apr-28 22:51:59 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-28 22:51:59 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-28 22:51:59 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-28 22:51:59 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-28 22:51:59 LOG5 end_task: Level: (4) ID = <10474> Status = 0 0 0 0 ok 2008-Apr-28 22:51:59 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-28 22:51:59 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-28 22:51:59 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-28 22:51:59 LOG5 begin_task: Level: (4) ID = <10475> Status = 0 0 0 0 ok 2008-Apr-28 22:51:59 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-28 22:51:59 LOG5 log_alfabeam: Parameters: 12.134305555555555 7.6226666666666691 12.912030 2008.3284127753695 -21.400078 2008-Apr-28 22:51:59 LOG4 log_alfabeam: ALFABEAM 0 12.134305555555555 7.622666666666671 2008-Apr-28 22:51:59 LOG4 log_alfabeam: ALFABEAM 1 12.134106325692411 7.720142783106222 2008-Apr-28 22:51:59 LOG4 log_alfabeam: ALFABEAM 2 12.128411278016527 7.655775088650528 2008-Apr-28 22:51:59 LOG4 log_alfabeam: ALFABEAM 3 12.128628494040079 7.557961950560435 2008-Apr-28 22:51:59 LOG4 log_alfabeam: ALFABEAM 4 12.134548172368467 7.524994367209189 2008-Apr-28 22:51:59 LOG4 log_alfabeam: ALFABEAM 5 12.140200842659508 7.590154228137058 2008-Apr-28 22:51:59 LOG4 log_alfabeam: ALFABEAM 6 12.139976320174046 7.687490894424109 2008-Apr-28 22:51:59 INFO2 take_spectra: Starting WAPP scan: 811900120 2008-Apr-28 22:52:00 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-28 22:52:00 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-28 22:52:00 LOG5 begin_task: Level: (5) ID = <10476> Status = 0 0 0 0 ok 2008-Apr-28 22:52:00 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-28 22:52:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.507 > 1.4)! 2008-Apr-28 22:52:00 LOG4 check_wapp_levels: WAPP-1 power levels: 1.263 1.259 1.201 1.449 2008-Apr-28 22:52:00 LOG4 check_wapp_levels: WAPP-2 power levels: 1.061 0.977 1.049 1.104 2008-Apr-28 22:52:00 LOG4 check_wapp_levels: WAPP-3 power levels: 1.342 1.388 1.482 1.244 2008-Apr-28 22:52:00 LOG4 check_wapp_levels: WAPP-4 power levels: 1.507 1.493 1.313 1.328 2008-Apr-28 22:52:00 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10321.00 2008-Apr-28 22:52:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.157820 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-28 22:52:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.157820 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 22:52:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.157820 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 22:52:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.157820 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 22:52:06 INFO5 check_wapp_levels: WAPP power levels are between 1.201 and 1.507 (still bad) 2008-Apr-28 22:52:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.157820 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 22:52:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.157820 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-28 22:52:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.157820 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-28 22:52:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.157820 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-28 22:52:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.157820 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-28 22:52:06 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-28 22:52:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-28 22:52:06 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-28 22:52:06 LOG5 end_task: Level: (5) ID = <10476> Status = 0 0 0 0 ok 2008-Apr-28 22:52:06 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-28 22:52:06 LOG5 end_task: Level: (4) ID = <10475> Status = 0 0 0 0 ok 2008-Apr-28 22:52:06 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-28 22:52:06 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-28 22:52:06 LOG5 finish_task: Level: (3) ID = <10466> Status = 0 0 0 0 ok 2008-Apr-28 22:52:06 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-28 22:52:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 22:52:06 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-28 22:52:06 LOG5 end_task: Level: (3) ID = <10466> Status = 0 0 0 0 ok 2008-Apr-28 22:52:06 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-28 22:52:06 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 47.56 and ZA = 15.53 2008-Apr-28 22:52:06 LOG3 track_source: Calling 'track_source AGESVC1A_p2_056 47.56 15.5344083525 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-28 22:52:06 START begin_task: Starting task 'sending tracking commands' 2008-Apr-28 22:52:06 LOG5 begin_task: Level: (3) ID = <10477> Status = 0 0 0 0 ok 2008-Apr-28 22:52:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_056} INFO {Slewing to source 'AGESVC1A_p2_056' ...} 2008-Apr-28 22:52:06 INFO1 track_source: Starting to track AGESVC1A_p2_056 2008-Apr-28 22:52:06 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_056" 2008-Apr-28 22:52:06 LOG3 vw_send: To DATATAKING: set ra 47.56 2008-Apr-28 22:52:06 LOG3 vw_send: To DATATAKING: set dec 15.5344083525 2008-Apr-28 22:52:06 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-28 22:52:06 LOG3 vw_send: To DATATAKING: pnt tr 47.56 15.5344083525 -CF 2008-Apr-28 22:52:06 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-28 22:52:06 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-28 22:52:06 LOG5 finish_task: Level: (3) ID = <10477> Status = 0 0 0 0 ok 2008-Apr-28 22:52:06 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-28 22:52:07 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 22:52:07 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-28 22:52:07 LOG5 end_task: Level: (3) ID = <10477> Status = 0 0 0 0 ok 2008-Apr-28 22:52:07 LOG1 fixed_driftmap: Parameters: HA = +00:46:00.2 Start = 12:55:27.4 LST = 12:54:50.3 diff = 37.1 secs 2008-Apr-28 22:52:07 INFO2 fixed_driftmap: Waiting 35.1 seconds for RA 12:09:27 2008-Apr-28 22:52:07 INFO2 lstwait: Waiting for 35 secs from LST 12:54:50 to LST 12:55:25 ... 2008-Apr-28 22:52:07 LOG4 send_obs_status: To obs_status: <1> TASKTIME 34.982911104929947 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-28 22:52:07 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-28 22:52:07 LOG5 begin_task: Level: (3) ID = <10478> Status = 0 0 0 0 ok 2008-Apr-28 22:52:07 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_056" 2008-Apr-28 22:52:07 LOG4 got_cormsg: From DATATAKING: set ra 47.56 2008-Apr-28 22:52:07 LOG4 got_cormsg: From DATATAKING: set dec 15.5344083525 2008-Apr-28 22:52:07 LOG4 got_cormsg: From DATATAKING: vw% 47.56 2008-Apr-28 22:52:07 LOG4 got_cormsg: From DATATAKING: vw% 15.5344083525 2008-Apr-28 22:52:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 22:52:07 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-28 22:52:07 LOG4 got_cormsg: From DATATAKING: pnt tr 47.56 15.5344083525 -CF 2008-Apr-28 22:52:07 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-28 22:52:07 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2008-Apr-28 22:52:12 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.895 and 1.107 2008-Apr-28 22:52:42 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-28 22:52:42 LOG5 end_task: Level: (3) ID = <10478> Status = 0 0 0 0 ok 2008-Apr-28 22:52:42 LOG4 lstwait: Finished waiting, the gui caused difference: 0.014110040003600943 2008-Apr-28 22:52:42 INFO3 lstwait: Finished waiting 2008-Apr-28 22:52:42 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-28 22:52:42 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-28 22:52:42 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-28 22:52:42 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-28 22:52:42 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-28 22:52:42 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-28 22:52:42 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-28 22:52:42 LOG5 begin_task: Level: (3) ID = <10479> Status = 0 0 0 0 ok 2008-Apr-28 22:52:42 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-28 22:52:42 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-28 22:52:42 INFO2 take_spectra: Starting WAPP scan: 811900121 2008-Apr-28 22:52:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-28 22:52:42 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-28 22:52:42 LOG5 begin_task: Level: (4) ID = <10480> Status = 0 0 0 0 ok 2008-Apr-28 22:52:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-28 22:52:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10363.00 2008-Apr-28 22:52:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.157820 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-28 22:52:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.157820 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 22:52:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.157820 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 22:52:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.157820 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 22:52:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.157820 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 22:52:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.157820 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-28 22:52:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.157820 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-28 22:52:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.157820 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-28 22:52:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.157820 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-28 22:56:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.785 < 0.8)! 2008-Apr-28 22:56:45 LOG4 check_wapp_levels: WAPP-1 power levels: 0.967 0.785 0.940 1.124 2008-Apr-28 22:56:45 LOG4 check_wapp_levels: WAPP-2 power levels: 1.064 0.982 1.050 1.105 2008-Apr-28 22:56:45 LOG4 check_wapp_levels: WAPP-3 power levels: 0.993 1.015 1.090 0.932 2008-Apr-28 22:56:45 LOG4 check_wapp_levels: WAPP-4 power levels: 1.100 1.087 0.958 0.968 2008-Apr-28 22:56:47 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.863 and 1.127 2008-Apr-28 22:56:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.681 < 0.8)! 2008-Apr-28 22:56:49 LOG4 check_wapp_levels: WAPP-1 power levels: 0.972 0.681 0.941 1.129 2008-Apr-28 22:56:49 LOG4 check_wapp_levels: WAPP-2 power levels: 1.065 0.983 1.049 1.105 2008-Apr-28 22:56:49 LOG4 check_wapp_levels: WAPP-3 power levels: 0.996 1.016 1.091 0.932 2008-Apr-28 22:56:49 LOG4 check_wapp_levels: WAPP-4 power levels: 1.099 1.089 0.958 0.970 2008-Apr-28 22:56:51 INFO5 check_wapp_levels: WAPP power levels are between 0.779 and 1.132 (still bad) 2008-Apr-28 22:56:53 INFO5 check_wapp_levels: WAPP power levels are between 0.750 and 1.133 (still bad) 2008-Apr-28 22:56:55 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.805 and 1.131 2008-Apr-28 22:57:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.542 < 0.8)! 2008-Apr-28 22:57:03 LOG4 check_wapp_levels: WAPP-1 power levels: 0.982 0.542 0.941 1.133 2008-Apr-28 22:57:03 LOG4 check_wapp_levels: WAPP-2 power levels: 1.065 0.986 1.052 1.108 2008-Apr-28 22:57:03 LOG4 check_wapp_levels: WAPP-3 power levels: 0.992 1.011 1.092 0.932 2008-Apr-28 22:57:03 LOG4 check_wapp_levels: WAPP-4 power levels: 1.101 1.091 0.959 0.972 2008-Apr-28 22:57:05 INFO5 check_wapp_levels: WAPP power levels are between 0.765 and 1.132 (still bad) 2008-Apr-28 22:57:07 INFO5 check_wapp_levels: WAPP power levels are between 0.591 and 1.134 (still bad) 2008-Apr-28 22:57:09 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.870 and 1.134 2008-Apr-28 22:57:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.674 < 0.8)! 2008-Apr-28 22:57:11 LOG4 check_wapp_levels: WAPP-1 power levels: 0.981 0.674 0.941 1.132 2008-Apr-28 22:57:11 LOG4 check_wapp_levels: WAPP-2 power levels: 1.063 0.987 1.052 1.107 2008-Apr-28 22:57:11 LOG4 check_wapp_levels: WAPP-3 power levels: 0.990 1.012 1.091 0.934 2008-Apr-28 22:57:11 LOG4 check_wapp_levels: WAPP-4 power levels: 1.101 1.089 0.959 0.971 2008-Apr-28 22:57:13 INFO5 check_wapp_levels: WAPP power levels are between 0.623 and 1.132 (still bad) 2008-Apr-28 22:57:15 INFO5 check_wapp_levels: WAPP power levels are between 0.678 and 1.134 (still bad) 2008-Apr-28 22:57:17 INFO5 check_wapp_levels: WAPP power levels are between 0.648 and 1.133 (still bad) 2008-Apr-28 22:57:19 INFO5 check_wapp_levels: WAPP power levels are between 0.576 and 1.133 (still bad) 2008-Apr-28 22:57:21 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.826 and 1.134 2008-Apr-28 22:57:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.768 < 0.8)! 2008-Apr-28 22:57:24 LOG4 check_wapp_levels: WAPP-1 power levels: 0.972 0.768 0.937 1.133 2008-Apr-28 22:57:24 LOG4 check_wapp_levels: WAPP-2 power levels: 1.066 0.986 1.051 1.107 2008-Apr-28 22:57:24 LOG4 check_wapp_levels: WAPP-3 power levels: 0.985 1.012 1.089 0.934 2008-Apr-28 22:57:24 LOG4 check_wapp_levels: WAPP-4 power levels: 1.101 1.090 0.959 0.971 2008-Apr-28 22:57:26 INFO5 check_wapp_levels: WAPP power levels are between 0.784 and 1.132 (still bad) 2008-Apr-28 22:57:28 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.800 and 1.132 2008-Apr-28 22:57:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.754 < 0.8)! 2008-Apr-28 22:57:30 LOG4 check_wapp_levels: WAPP-1 power levels: 0.970 0.754 0.935 1.134 2008-Apr-28 22:57:30 LOG4 check_wapp_levels: WAPP-2 power levels: 1.062 0.986 1.052 1.107 2008-Apr-28 22:57:30 LOG4 check_wapp_levels: WAPP-3 power levels: 0.981 1.010 1.088 0.935 2008-Apr-28 22:57:30 LOG4 check_wapp_levels: WAPP-4 power levels: 1.101 1.090 0.959 0.970 2008-Apr-28 22:57:32 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.132 (still bad) 2008-Apr-28 22:57:34 INFO5 check_wapp_levels: WAPP power levels are between 0.799 and 1.136 (still bad) 2008-Apr-28 22:57:36 INFO5 check_wapp_levels: WAPP power levels are between 0.731 and 1.135 (still bad) 2008-Apr-28 22:57:38 INFO5 check_wapp_levels: WAPP power levels are between 0.668 and 1.134 (still bad) 2008-Apr-28 22:57:40 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.840 and 1.132 2008-Apr-28 22:57:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.713 < 0.8)! 2008-Apr-28 22:57:42 LOG4 check_wapp_levels: WAPP-1 power levels: 0.967 0.713 0.931 1.131 2008-Apr-28 22:57:42 LOG4 check_wapp_levels: WAPP-2 power levels: 1.062 0.988 1.052 1.105 2008-Apr-28 22:57:42 LOG4 check_wapp_levels: WAPP-3 power levels: 0.979 1.010 1.087 0.934 2008-Apr-28 22:57:42 LOG4 check_wapp_levels: WAPP-4 power levels: 1.102 1.089 0.960 0.971 2008-Apr-28 22:57:44 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.811 and 1.132 2008-Apr-28 22:57:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.548 < 0.8)! 2008-Apr-28 22:57:46 LOG4 check_wapp_levels: WAPP-1 power levels: 0.970 0.548 0.933 1.132 2008-Apr-28 22:57:46 LOG4 check_wapp_levels: WAPP-2 power levels: 1.064 0.986 1.052 1.106 2008-Apr-28 22:57:46 LOG4 check_wapp_levels: WAPP-3 power levels: 0.978 1.010 1.087 0.935 2008-Apr-28 22:57:46 LOG4 check_wapp_levels: WAPP-4 power levels: 1.101 1.088 0.959 0.970 2008-Apr-28 22:57:48 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.803 and 1.131 2008-Apr-28 22:57:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.524 < 0.8)! 2008-Apr-28 22:57:50 LOG4 check_wapp_levels: WAPP-1 power levels: 0.968 0.524 0.931 1.131 2008-Apr-28 22:57:50 LOG4 check_wapp_levels: WAPP-2 power levels: 1.062 0.985 1.052 1.105 2008-Apr-28 22:57:50 LOG4 check_wapp_levels: WAPP-3 power levels: 0.978 1.012 1.087 0.936 2008-Apr-28 22:57:50 LOG4 check_wapp_levels: WAPP-4 power levels: 1.101 1.089 0.959 0.970 2008-Apr-28 22:57:52 INFO5 check_wapp_levels: WAPP power levels are between 0.543 and 1.130 (still bad) 2008-Apr-28 22:57:54 INFO5 check_wapp_levels: WAPP power levels are between 0.645 and 1.130 (still bad) 2008-Apr-28 22:57:56 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.875 and 1.129 2008-Apr-28 22:58:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.588 < 0.8)! 2008-Apr-28 22:58:00 LOG4 check_wapp_levels: WAPP-1 power levels: 0.964 0.588 0.927 1.130 2008-Apr-28 22:58:00 LOG4 check_wapp_levels: WAPP-2 power levels: 1.066 0.987 1.053 1.106 2008-Apr-28 22:58:00 LOG4 check_wapp_levels: WAPP-3 power levels: 0.979 1.011 1.084 0.936 2008-Apr-28 22:58:00 LOG4 check_wapp_levels: WAPP-4 power levels: 1.102 1.090 0.960 0.971 2008-Apr-28 22:58:02 INFO5 check_wapp_levels: WAPP power levels are between 0.752 and 1.128 (still bad) 2008-Apr-28 22:58:04 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.130 (still bad) 2008-Apr-28 22:58:06 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.835 and 1.128 2008-Apr-28 22:58:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.597 < 0.8)! 2008-Apr-28 22:58:08 LOG4 check_wapp_levels: WAPP-1 power levels: 0.961 0.597 0.930 1.128 2008-Apr-28 22:58:08 LOG4 check_wapp_levels: WAPP-2 power levels: 1.064 0.987 1.052 1.106 2008-Apr-28 22:58:08 LOG4 check_wapp_levels: WAPP-3 power levels: 0.980 1.014 1.088 0.936 2008-Apr-28 22:58:08 LOG4 check_wapp_levels: WAPP-4 power levels: 1.104 1.088 0.961 0.969 2008-Apr-28 22:58:10 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.850 and 1.130 2008-Apr-28 22:58:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.700 < 0.8)! 2008-Apr-28 22:58:14 LOG4 check_wapp_levels: WAPP-1 power levels: 0.959 0.700 0.930 1.130 2008-Apr-28 22:58:14 LOG4 check_wapp_levels: WAPP-2 power levels: 1.062 0.986 1.051 1.107 2008-Apr-28 22:58:14 LOG4 check_wapp_levels: WAPP-3 power levels: 0.980 1.014 1.094 0.939 2008-Apr-28 22:58:14 LOG4 check_wapp_levels: WAPP-4 power levels: 1.103 1.091 0.960 0.971 2008-Apr-28 22:58:16 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.857 and 1.133 2008-Apr-28 22:58:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.586 < 0.8)! 2008-Apr-28 22:58:20 LOG4 check_wapp_levels: WAPP-1 power levels: 0.957 0.586 0.930 1.129 2008-Apr-28 22:58:20 LOG4 check_wapp_levels: WAPP-2 power levels: 1.064 0.986 1.053 1.108 2008-Apr-28 22:58:20 LOG4 check_wapp_levels: WAPP-3 power levels: 0.981 1.013 1.093 0.940 2008-Apr-28 22:58:20 LOG4 check_wapp_levels: WAPP-4 power levels: 1.103 1.089 0.960 0.970 2008-Apr-28 22:58:22 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.827 and 1.127 2008-Apr-28 22:58:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.782 < 0.8)! 2008-Apr-28 22:58:28 LOG4 check_wapp_levels: WAPP-1 power levels: 0.959 0.782 0.928 1.128 2008-Apr-28 22:58:28 LOG4 check_wapp_levels: WAPP-2 power levels: 1.064 0.986 1.053 1.108 2008-Apr-28 22:58:28 LOG4 check_wapp_levels: WAPP-3 power levels: 0.980 1.015 1.087 0.936 2008-Apr-28 22:58:28 LOG4 check_wapp_levels: WAPP-4 power levels: 1.103 1.088 0.960 0.970 2008-Apr-28 22:58:30 INFO5 check_wapp_levels: WAPP power levels are between 0.782 and 1.130 (still bad) 2008-Apr-28 22:58:32 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.880 and 1.130 2008-Apr-28 22:58:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.721 < 0.8)! 2008-Apr-28 22:58:36 LOG4 check_wapp_levels: WAPP-1 power levels: 0.955 0.721 0.929 1.129 2008-Apr-28 22:58:36 LOG4 check_wapp_levels: WAPP-2 power levels: 1.063 0.987 1.052 1.107 2008-Apr-28 22:58:36 LOG4 check_wapp_levels: WAPP-3 power levels: 0.981 1.014 1.087 0.936 2008-Apr-28 22:58:36 LOG4 check_wapp_levels: WAPP-4 power levels: 1.102 1.089 0.959 0.970 2008-Apr-28 22:58:38 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.900 and 1.129 2008-Apr-28 22:58:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.467 < 0.8)! 2008-Apr-28 22:58:40 LOG4 check_wapp_levels: WAPP-1 power levels: 0.953 0.467 0.926 1.129 2008-Apr-28 22:58:40 LOG4 check_wapp_levels: WAPP-2 power levels: 1.064 0.986 1.052 1.107 2008-Apr-28 22:58:40 LOG4 check_wapp_levels: WAPP-3 power levels: 0.984 1.016 1.087 0.935 2008-Apr-28 22:58:40 LOG4 check_wapp_levels: WAPP-4 power levels: 1.104 1.089 0.960 0.971 2008-Apr-28 22:58:42 INFO5 check_wapp_levels: WAPP power levels are between 0.654 and 1.128 (still bad) 2008-Apr-28 22:58:44 INFO5 check_wapp_levels: WAPP power levels are between 0.711 and 1.127 (still bad) 2008-Apr-28 22:58:46 INFO5 check_wapp_levels: WAPP power levels are between 0.722 and 1.128 (still bad) 2008-Apr-28 22:58:48 INFO5 check_wapp_levels: WAPP power levels are between 0.673 and 1.127 (still bad) 2008-Apr-28 22:58:51 INFO5 check_wapp_levels: WAPP power levels are between 0.730 and 1.125 (still bad) 2008-Apr-28 22:58:53 INFO5 check_wapp_levels: WAPP power levels are between 0.710 and 1.127 (still bad) 2008-Apr-28 22:58:55 INFO5 check_wapp_levels: WAPP power levels are between 0.633 and 1.127 (still bad) 2008-Apr-28 22:58:57 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.838 and 1.128 2008-Apr-28 22:58:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.440 < 0.8)! 2008-Apr-28 22:58:59 LOG4 check_wapp_levels: WAPP-1 power levels: 0.952 0.440 0.924 1.127 2008-Apr-28 22:58:59 LOG4 check_wapp_levels: WAPP-2 power levels: 1.063 0.985 1.054 1.107 2008-Apr-28 22:58:59 LOG4 check_wapp_levels: WAPP-3 power levels: 1.002 1.035 1.086 0.937 2008-Apr-28 22:58:59 LOG4 check_wapp_levels: WAPP-4 power levels: 1.105 1.091 0.961 0.972 2008-Apr-28 22:59:01 INFO5 check_wapp_levels: WAPP power levels are between 0.726 and 1.127 (still bad) 2008-Apr-28 22:59:03 INFO5 check_wapp_levels: WAPP power levels are between 0.660 and 1.127 (still bad) 2008-Apr-28 22:59:05 INFO5 check_wapp_levels: WAPP power levels are between 0.572 and 1.125 (still bad) 2008-Apr-28 22:59:07 INFO5 check_wapp_levels: WAPP power levels are between 0.699 and 1.127 (still bad) 2008-Apr-28 22:59:09 INFO5 check_wapp_levels: WAPP power levels are between 0.643 and 1.127 (still bad) 2008-Apr-28 22:59:11 INFO5 check_wapp_levels: WAPP power levels are between 0.660 and 1.126 (still bad) 2008-Apr-28 22:59:13 INFO5 check_wapp_levels: WAPP power levels are between 0.588 and 1.127 (still bad) 2008-Apr-28 22:59:15 INFO5 check_wapp_levels: WAPP power levels are between 0.748 and 1.127 (still bad) 2008-Apr-28 22:59:17 INFO5 check_wapp_levels: WAPP power levels are between 0.753 and 1.126 (still bad) 2008-Apr-28 22:59:19 INFO5 check_wapp_levels: WAPP power levels are between 0.618 and 1.122 (still bad) 2008-Apr-28 22:59:21 INFO5 check_wapp_levels: WAPP power levels are between 0.772 and 1.125 (still bad) 2008-Apr-28 22:59:23 INFO5 check_wapp_levels: WAPP power levels are between 0.698 and 1.127 (still bad) 2008-Apr-28 22:59:25 INFO5 check_wapp_levels: WAPP power levels are between 0.688 and 1.127 (still bad) 2008-Apr-28 22:59:27 INFO5 check_wapp_levels: WAPP power levels are between 0.702 and 1.124 (still bad) 2008-Apr-28 22:59:29 INFO5 check_wapp_levels: WAPP power levels are between 0.548 and 1.125 (still bad) 2008-Apr-28 22:59:31 INFO5 check_wapp_levels: WAPP power levels are between 0.536 and 1.124 (still bad) 2008-Apr-28 22:59:33 INFO5 check_wapp_levels: WAPP power levels are between 0.576 and 1.127 (still bad) 2008-Apr-28 22:59:35 INFO5 check_wapp_levels: WAPP power levels are between 0.593 and 1.126 (still bad) 2008-Apr-28 22:59:37 INFO5 check_wapp_levels: WAPP power levels are between 0.668 and 1.127 (still bad) 2008-Apr-28 22:59:39 INFO5 check_wapp_levels: WAPP power levels are between 0.651 and 1.126 (still bad) 2008-Apr-28 22:59:41 INFO5 check_wapp_levels: WAPP power levels are between 0.679 and 1.125 (still bad) 2008-Apr-28 22:59:43 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.923 and 1.127 2008-Apr-28 22:59:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.633 < 0.8)! 2008-Apr-28 22:59:53 LOG4 check_wapp_levels: WAPP-1 power levels: 0.947 0.633 0.923 1.125 2008-Apr-28 22:59:53 LOG4 check_wapp_levels: WAPP-2 power levels: 1.066 0.986 1.054 1.109 2008-Apr-28 22:59:53 LOG4 check_wapp_levels: WAPP-3 power levels: 0.984 1.016 1.086 0.937 2008-Apr-28 22:59:53 LOG4 check_wapp_levels: WAPP-4 power levels: 1.109 1.092 0.964 0.972 2008-Apr-28 22:59:55 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.843 and 1.126 2008-Apr-28 22:59:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.739 < 0.8)! 2008-Apr-28 22:59:57 LOG4 check_wapp_levels: WAPP-1 power levels: 0.946 0.739 0.924 1.124 2008-Apr-28 22:59:57 LOG4 check_wapp_levels: WAPP-2 power levels: 1.063 0.986 1.052 1.108 2008-Apr-28 22:59:57 LOG4 check_wapp_levels: WAPP-3 power levels: 0.984 1.015 1.087 0.936 2008-Apr-28 22:59:57 LOG4 check_wapp_levels: WAPP-4 power levels: 1.107 1.091 0.964 0.972 2008-Apr-28 22:59:59 INFO5 check_wapp_levels: WAPP power levels are between 0.774 and 1.125 (still bad) 2008-Apr-28 23:00:01 INFO5 check_wapp_levels: WAPP power levels are between 0.613 and 1.126 (still bad) 2008-Apr-28 23:00:03 INFO5 check_wapp_levels: WAPP power levels are between 0.631 and 1.127 (still bad) 2008-Apr-28 23:00:05 INFO5 check_wapp_levels: WAPP power levels are between 0.616 and 1.124 (still bad) 2008-Apr-28 23:00:07 INFO5 check_wapp_levels: WAPP power levels are between 0.790 and 1.127 (still bad) 2008-Apr-28 23:00:09 INFO5 check_wapp_levels: WAPP power levels are between 0.669 and 1.127 (still bad) 2008-Apr-28 23:00:11 INFO5 check_wapp_levels: WAPP power levels are between 0.684 and 1.128 (still bad) 2008-Apr-28 23:00:13 INFO5 check_wapp_levels: WAPP power levels are between 0.553 and 1.127 (still bad) 2008-Apr-28 23:00:16 INFO5 check_wapp_levels: WAPP power levels are between 0.760 and 1.127 (still bad) 2008-Apr-28 23:00:18 INFO5 check_wapp_levels: WAPP power levels are between 0.730 and 1.126 (still bad) 2008-Apr-28 23:00:20 INFO5 check_wapp_levels: WAPP power levels are between 0.784 and 1.126 (still bad) 2008-Apr-28 23:00:22 INFO5 check_wapp_levels: WAPP power levels are between 0.777 and 1.124 (still bad) 2008-Apr-28 23:00:24 INFO5 check_wapp_levels: WAPP power levels are between 0.774 and 1.124 (still bad) 2008-Apr-28 23:00:26 INFO5 check_wapp_levels: WAPP power levels are between 0.479 and 1.123 (still bad) 2008-Apr-28 23:00:28 INFO5 check_wapp_levels: WAPP power levels are between 0.629 and 1.123 (still bad) 2008-Apr-28 23:00:30 INFO5 check_wapp_levels: WAPP power levels are between 0.785 and 1.123 (still bad) 2008-Apr-28 23:00:32 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.867 and 1.124 2008-Apr-28 23:00:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.651 < 0.8)! 2008-Apr-28 23:00:36 LOG4 check_wapp_levels: WAPP-1 power levels: 0.950 0.651 0.926 1.124 2008-Apr-28 23:00:36 LOG4 check_wapp_levels: WAPP-2 power levels: 1.067 0.987 1.054 1.109 2008-Apr-28 23:00:36 LOG4 check_wapp_levels: WAPP-3 power levels: 0.985 1.017 1.088 0.935 2008-Apr-28 23:00:36 LOG4 check_wapp_levels: WAPP-4 power levels: 1.108 1.091 0.964 0.972 2008-Apr-28 23:00:38 INFO5 check_wapp_levels: WAPP power levels are between 0.746 and 1.124 (still bad) 2008-Apr-28 23:00:40 INFO5 check_wapp_levels: WAPP power levels are between 0.756 and 1.124 (still bad) 2008-Apr-28 23:00:42 INFO5 check_wapp_levels: WAPP power levels are between 0.769 and 1.124 (still bad) 2008-Apr-28 23:00:44 INFO5 check_wapp_levels: WAPP power levels are between 0.678 and 1.125 (still bad) 2008-Apr-28 23:00:46 INFO5 check_wapp_levels: WAPP power levels are between 0.658 and 1.123 (still bad) 2008-Apr-28 23:00:48 INFO5 check_wapp_levels: WAPP power levels are between 0.689 and 1.125 (still bad) 2008-Apr-28 23:00:50 INFO5 check_wapp_levels: WAPP power levels are between 0.745 and 1.124 (still bad) 2008-Apr-28 23:00:52 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.823 and 1.124 2008-Apr-28 23:01:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.617 < 0.8)! 2008-Apr-28 23:01:02 LOG4 check_wapp_levels: WAPP-1 power levels: 0.951 0.617 0.926 1.127 2008-Apr-28 23:01:02 LOG4 check_wapp_levels: WAPP-2 power levels: 1.066 0.985 1.053 1.106 2008-Apr-28 23:01:02 LOG4 check_wapp_levels: WAPP-3 power levels: 0.987 1.017 1.084 0.936 2008-Apr-28 23:01:02 LOG4 check_wapp_levels: WAPP-4 power levels: 1.105 1.089 0.963 0.972 2008-Apr-28 23:01:04 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.902 and 1.126 2008-Apr-28 23:01:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.699 < 0.8)! 2008-Apr-28 23:01:06 LOG4 check_wapp_levels: WAPP-1 power levels: 0.948 0.699 0.927 1.124 2008-Apr-28 23:01:06 LOG4 check_wapp_levels: WAPP-2 power levels: 1.066 0.987 1.051 1.108 2008-Apr-28 23:01:06 LOG4 check_wapp_levels: WAPP-3 power levels: 0.985 1.015 1.087 0.937 2008-Apr-28 23:01:06 LOG4 check_wapp_levels: WAPP-4 power levels: 1.107 1.089 0.964 0.970 2008-Apr-28 23:01:08 INFO5 check_wapp_levels: WAPP power levels are between 0.743 and 1.123 (still bad) 2008-Apr-28 23:01:10 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.833 and 1.125 2008-Apr-28 23:01:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.770 < 0.8)! 2008-Apr-28 23:01:12 LOG4 check_wapp_levels: WAPP-1 power levels: 0.949 0.770 0.927 1.124 2008-Apr-28 23:01:12 LOG4 check_wapp_levels: WAPP-2 power levels: 1.065 0.986 1.051 1.108 2008-Apr-28 23:01:12 LOG4 check_wapp_levels: WAPP-3 power levels: 0.985 1.015 1.086 0.935 2008-Apr-28 23:01:12 LOG4 check_wapp_levels: WAPP-4 power levels: 1.107 1.090 0.963 0.972 2008-Apr-28 23:01:14 INFO5 check_wapp_levels: WAPP power levels are between 0.766 and 1.124 (still bad) 2008-Apr-28 23:01:16 INFO5 check_wapp_levels: WAPP power levels are between 0.799 and 1.125 (still bad) 2008-Apr-28 23:01:18 INFO5 check_wapp_levels: WAPP power levels are between 0.713 and 1.125 (still bad) 2008-Apr-28 23:01:20 INFO5 check_wapp_levels: WAPP power levels are between 0.765 and 1.125 (still bad) 2008-Apr-28 23:01:22 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.893 and 1.125 2008-Apr-28 23:01:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.621 < 0.8)! 2008-Apr-28 23:01:24 LOG4 check_wapp_levels: WAPP-1 power levels: 0.946 0.621 0.927 1.126 2008-Apr-28 23:01:24 LOG4 check_wapp_levels: WAPP-2 power levels: 1.065 0.985 1.052 1.108 2008-Apr-28 23:01:24 LOG4 check_wapp_levels: WAPP-3 power levels: 0.982 1.014 1.089 0.937 2008-Apr-28 23:01:24 LOG4 check_wapp_levels: WAPP-4 power levels: 1.106 1.090 0.964 0.971 2008-Apr-28 23:01:26 INFO5 check_wapp_levels: WAPP power levels are between 0.619 and 1.126 (still bad) 2008-Apr-28 23:01:28 INFO5 check_wapp_levels: WAPP power levels are between 0.546 and 1.126 (still bad) 2008-Apr-28 23:01:30 INFO5 check_wapp_levels: WAPP power levels are between 0.622 and 1.127 (still bad) 2008-Apr-28 23:01:32 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.833 and 1.128 2008-Apr-28 23:01:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.687 < 0.8)! 2008-Apr-28 23:01:34 LOG4 check_wapp_levels: WAPP-1 power levels: 0.948 0.687 0.929 1.127 2008-Apr-28 23:01:34 LOG4 check_wapp_levels: WAPP-2 power levels: 1.068 0.984 1.054 1.108 2008-Apr-28 23:01:34 LOG4 check_wapp_levels: WAPP-3 power levels: 0.981 1.013 1.090 0.933 2008-Apr-28 23:01:34 LOG4 check_wapp_levels: WAPP-4 power levels: 1.106 1.090 0.962 0.972 2008-Apr-28 23:01:36 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.835 and 1.126 2008-Apr-28 23:01:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.702 < 0.8)! 2008-Apr-28 23:01:43 LOG4 check_wapp_levels: WAPP-1 power levels: 0.948 0.702 0.922 1.124 2008-Apr-28 23:01:43 LOG4 check_wapp_levels: WAPP-2 power levels: 1.066 0.984 1.054 1.108 2008-Apr-28 23:01:43 LOG4 check_wapp_levels: WAPP-3 power levels: 0.980 1.013 1.085 0.934 2008-Apr-28 23:01:43 LOG4 check_wapp_levels: WAPP-4 power levels: 1.106 1.089 0.963 0.971 2008-Apr-28 23:01:45 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.896 and 1.125 2008-Apr-28 23:04:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.784 < 0.8)! 2008-Apr-28 23:04:06 LOG4 check_wapp_levels: WAPP-1 power levels: 0.938 0.784 0.908 1.101 2008-Apr-28 23:04:06 LOG4 check_wapp_levels: WAPP-2 power levels: 1.064 0.980 1.054 1.105 2008-Apr-28 23:04:06 LOG4 check_wapp_levels: WAPP-3 power levels: 0.977 1.012 1.082 0.934 2008-Apr-28 23:04:06 LOG4 check_wapp_levels: WAPP-4 power levels: 1.101 1.089 0.961 0.969 2008-Apr-28 23:04:08 INFO5 check_wapp_levels: WAPP power levels are between 0.621 and 1.105 (still bad) 2008-Apr-28 23:04:10 INFO5 check_wapp_levels: WAPP power levels are between 0.614 and 1.106 (still bad) 2008-Apr-28 23:04:12 INFO5 check_wapp_levels: WAPP power levels are between 0.536 and 1.106 (still bad) 2008-Apr-28 23:04:14 INFO5 check_wapp_levels: WAPP power levels are between 0.684 and 1.107 (still bad) 2008-Apr-28 23:04:16 INFO5 check_wapp_levels: WAPP power levels are between 0.649 and 1.112 (still bad) 2008-Apr-28 23:04:18 INFO5 check_wapp_levels: WAPP power levels are between 0.644 and 1.111 (still bad) 2008-Apr-28 23:04:20 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.112 (still bad) 2008-Apr-28 23:04:22 INFO5 check_wapp_levels: WAPP power levels are between 0.580 and 1.112 (still bad) 2008-Apr-28 23:04:24 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.112 (still bad) 2008-Apr-28 23:04:26 INFO5 check_wapp_levels: WAPP power levels are between 0.784 and 1.117 (still bad) 2008-Apr-28 23:04:28 INFO5 check_wapp_levels: WAPP power levels are between 0.652 and 1.118 (still bad) 2008-Apr-28 23:04:31 INFO5 check_wapp_levels: WAPP power levels are between 0.703 and 1.119 (still bad) 2008-Apr-28 23:04:33 INFO5 check_wapp_levels: WAPP power levels are between 0.595 and 1.123 (still bad) 2008-Apr-28 23:04:35 INFO5 check_wapp_levels: WAPP power levels are between 0.556 and 1.123 (still bad) 2008-Apr-28 23:04:37 INFO5 check_wapp_levels: WAPP power levels are between 0.657 and 1.125 (still bad) 2008-Apr-28 23:04:39 INFO5 check_wapp_levels: WAPP power levels are between 0.756 and 1.127 (still bad) 2008-Apr-28 23:04:41 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.934 and 1.127 2008-Apr-28 23:04:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.766 < 0.8)! 2008-Apr-28 23:04:43 LOG4 check_wapp_levels: WAPP-1 power levels: 0.944 0.766 0.932 1.129 2008-Apr-28 23:04:43 LOG4 check_wapp_levels: WAPP-2 power levels: 1.067 0.983 1.053 1.106 2008-Apr-28 23:04:43 LOG4 check_wapp_levels: WAPP-3 power levels: 0.979 1.012 1.086 0.934 2008-Apr-28 23:04:43 LOG4 check_wapp_levels: WAPP-4 power levels: 1.104 1.090 0.961 0.971 2008-Apr-28 23:04:45 INFO5 check_wapp_levels: WAPP power levels are between 0.601 and 1.128 (still bad) 2008-Apr-28 23:04:47 INFO5 check_wapp_levels: WAPP power levels are between 0.647 and 1.124 (still bad) 2008-Apr-28 23:04:49 INFO5 check_wapp_levels: WAPP power levels are between 0.719 and 1.123 (still bad) 2008-Apr-28 23:04:51 INFO5 check_wapp_levels: WAPP power levels are between 0.623 and 1.125 (still bad) 2008-Apr-28 23:04:53 INFO5 check_wapp_levels: WAPP power levels are between 0.629 and 1.124 (still bad) 2008-Apr-28 23:04:55 INFO5 check_wapp_levels: WAPP power levels are between 0.721 and 1.123 (still bad) 2008-Apr-28 23:04:57 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.864 and 1.122 2008-Apr-28 23:05:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.744 < 0.8)! 2008-Apr-28 23:05:01 LOG4 check_wapp_levels: WAPP-1 power levels: 0.947 0.744 0.927 1.124 2008-Apr-28 23:05:01 LOG4 check_wapp_levels: WAPP-2 power levels: 1.066 0.983 1.054 1.107 2008-Apr-28 23:05:01 LOG4 check_wapp_levels: WAPP-3 power levels: 0.980 1.012 1.086 0.936 2008-Apr-28 23:05:01 LOG4 check_wapp_levels: WAPP-4 power levels: 1.103 1.090 0.959 0.969 2008-Apr-28 23:05:03 INFO5 check_wapp_levels: WAPP power levels are between 0.762 and 1.123 (still bad) 2008-Apr-28 23:05:05 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.873 and 1.123 2008-Apr-28 23:05:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.756 < 0.8)! 2008-Apr-28 23:05:07 LOG4 check_wapp_levels: WAPP-1 power levels: 0.944 0.756 0.926 1.125 2008-Apr-28 23:05:07 LOG4 check_wapp_levels: WAPP-2 power levels: 1.068 0.988 1.053 1.106 2008-Apr-28 23:05:07 LOG4 check_wapp_levels: WAPP-3 power levels: 0.980 1.014 1.088 0.935 2008-Apr-28 23:05:07 LOG4 check_wapp_levels: WAPP-4 power levels: 1.104 1.089 0.959 0.970 2008-Apr-28 23:05:09 INFO5 check_wapp_levels: WAPP power levels are between 0.679 and 1.122 (still bad) 2008-Apr-28 23:05:11 INFO5 check_wapp_levels: WAPP power levels are between 0.763 and 1.121 (still bad) 2008-Apr-28 23:05:13 INFO5 check_wapp_levels: WAPP power levels are between 0.684 and 1.122 (still bad) 2008-Apr-28 23:05:15 INFO5 check_wapp_levels: WAPP power levels are between 0.789 and 1.121 (still bad) 2008-Apr-28 23:05:17 INFO5 check_wapp_levels: WAPP power levels are between 0.664 and 1.122 (still bad) 2008-Apr-28 23:05:19 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.884 and 1.122 2008-Apr-28 23:05:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.775 < 0.8)! 2008-Apr-28 23:05:23 LOG4 check_wapp_levels: WAPP-1 power levels: 0.944 0.775 0.924 1.121 2008-Apr-28 23:05:23 LOG4 check_wapp_levels: WAPP-2 power levels: 1.072 0.988 1.054 1.107 2008-Apr-28 23:05:23 LOG4 check_wapp_levels: WAPP-3 power levels: 0.980 1.013 1.086 0.935 2008-Apr-28 23:05:23 LOG4 check_wapp_levels: WAPP-4 power levels: 1.106 1.090 0.961 0.971 2008-Apr-28 23:05:25 INFO5 check_wapp_levels: WAPP power levels are between 0.702 and 1.121 (still bad) 2008-Apr-28 23:05:27 INFO5 check_wapp_levels: WAPP power levels are between 0.614 and 1.121 (still bad) 2008-Apr-28 23:05:29 INFO5 check_wapp_levels: WAPP power levels are between 0.610 and 1.121 (still bad) 2008-Apr-28 23:05:31 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.867 and 1.123 2008-Apr-28 23:05:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.760 < 0.8)! 2008-Apr-28 23:05:33 LOG4 check_wapp_levels: WAPP-1 power levels: 0.943 0.760 0.926 1.122 2008-Apr-28 23:05:33 LOG4 check_wapp_levels: WAPP-2 power levels: 1.065 0.983 1.053 1.107 2008-Apr-28 23:05:33 LOG4 check_wapp_levels: WAPP-3 power levels: 0.979 1.011 1.086 0.938 2008-Apr-28 23:05:33 LOG4 check_wapp_levels: WAPP-4 power levels: 1.106 1.090 0.961 0.971 2008-Apr-28 23:05:35 INFO5 check_wapp_levels: WAPP power levels are between 0.760 and 1.120 (still bad) 2008-Apr-28 23:05:37 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.851 and 1.120 2008-Apr-28 23:05:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.747 < 0.8)! 2008-Apr-28 23:05:39 LOG4 check_wapp_levels: WAPP-1 power levels: 0.943 0.747 0.926 1.122 2008-Apr-28 23:05:39 LOG4 check_wapp_levels: WAPP-2 power levels: 1.065 0.984 1.054 1.106 2008-Apr-28 23:05:39 LOG4 check_wapp_levels: WAPP-3 power levels: 0.980 1.011 1.085 0.935 2008-Apr-28 23:05:39 LOG4 check_wapp_levels: WAPP-4 power levels: 1.104 1.088 0.961 0.970 2008-Apr-28 23:05:41 INFO5 check_wapp_levels: WAPP power levels are between 0.751 and 1.121 (still bad) 2008-Apr-28 23:05:43 INFO5 check_wapp_levels: WAPP power levels are between 0.693 and 1.123 (still bad) 2008-Apr-28 23:05:45 INFO5 check_wapp_levels: WAPP power levels are between 0.739 and 1.123 (still bad) 2008-Apr-28 23:05:47 INFO5 check_wapp_levels: WAPP power levels are between 0.715 and 1.120 (still bad) 2008-Apr-28 23:05:49 INFO5 check_wapp_levels: WAPP power levels are between 0.707 and 1.120 (still bad) 2008-Apr-28 23:05:51 INFO5 check_wapp_levels: WAPP power levels are between 0.703 and 1.120 (still bad) 2008-Apr-28 23:05:53 INFO5 check_wapp_levels: WAPP power levels are between 0.698 and 1.118 (still bad) 2008-Apr-28 23:05:55 INFO5 check_wapp_levels: WAPP power levels are between 0.723 and 1.120 (still bad) 2008-Apr-28 23:05:58 INFO5 check_wapp_levels: WAPP power levels are between 0.755 and 1.119 (still bad) 2008-Apr-28 23:06:00 INFO5 check_wapp_levels: WAPP power levels are between 0.696 and 1.119 (still bad) 2008-Apr-28 23:06:02 INFO5 check_wapp_levels: WAPP power levels are between 0.686 and 1.118 (still bad) 2008-Apr-28 23:06:04 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.807 and 1.119 2008-Apr-28 23:06:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.712 < 0.8)! 2008-Apr-28 23:06:08 LOG4 check_wapp_levels: WAPP-1 power levels: 0.946 0.712 0.927 1.121 2008-Apr-28 23:06:08 LOG4 check_wapp_levels: WAPP-2 power levels: 1.067 0.982 1.056 1.109 2008-Apr-28 23:06:08 LOG4 check_wapp_levels: WAPP-3 power levels: 0.984 1.015 1.084 0.934 2008-Apr-28 23:06:08 LOG4 check_wapp_levels: WAPP-4 power levels: 1.103 1.087 0.960 0.967 2008-Apr-28 23:06:10 INFO5 check_wapp_levels: WAPP power levels are between 0.702 and 1.121 (still bad) 2008-Apr-28 23:06:12 INFO5 check_wapp_levels: WAPP power levels are between 0.789 and 1.120 (still bad) 2008-Apr-28 23:06:14 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.846 and 1.122 2008-Apr-28 23:06:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.692 < 0.8)! 2008-Apr-28 23:06:16 LOG4 check_wapp_levels: WAPP-1 power levels: 0.948 0.692 0.924 1.124 2008-Apr-28 23:06:16 LOG4 check_wapp_levels: WAPP-2 power levels: 1.064 0.983 1.056 1.108 2008-Apr-28 23:06:16 LOG4 check_wapp_levels: WAPP-3 power levels: 0.982 1.012 1.086 0.934 2008-Apr-28 23:06:16 LOG4 check_wapp_levels: WAPP-4 power levels: 1.104 1.087 0.960 0.968 2008-Apr-28 23:06:18 INFO5 check_wapp_levels: WAPP power levels are between 0.595 and 1.122 (still bad) 2008-Apr-28 23:06:20 INFO5 check_wapp_levels: WAPP power levels are between 0.747 and 1.124 (still bad) 2008-Apr-28 23:06:22 INFO5 check_wapp_levels: WAPP power levels are between 0.684 and 1.123 (still bad) 2008-Apr-28 23:06:24 INFO5 check_wapp_levels: WAPP power levels are between 0.632 and 1.123 (still bad) 2008-Apr-28 23:06:26 INFO5 check_wapp_levels: WAPP power levels are between 0.764 and 1.125 (still bad) 2008-Apr-28 23:06:28 INFO5 check_wapp_levels: WAPP power levels are between 0.638 and 1.125 (still bad) 2008-Apr-28 23:06:30 INFO5 check_wapp_levels: WAPP power levels are between 0.783 and 1.124 (still bad) 2008-Apr-28 23:06:32 INFO5 check_wapp_levels: WAPP power levels are between 0.607 and 1.126 (still bad) 2008-Apr-28 23:06:34 INFO5 check_wapp_levels: WAPP power levels are between 0.641 and 1.125 (still bad) 2008-Apr-28 23:06:36 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.834 and 1.127 2008-Apr-28 23:06:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.794 < 0.8)! 2008-Apr-28 23:06:38 LOG4 check_wapp_levels: WAPP-1 power levels: 0.946 0.794 0.925 1.125 2008-Apr-28 23:06:38 LOG4 check_wapp_levels: WAPP-2 power levels: 1.065 0.982 1.054 1.106 2008-Apr-28 23:06:38 LOG4 check_wapp_levels: WAPP-3 power levels: 0.978 1.009 1.083 0.934 2008-Apr-28 23:06:38 LOG4 check_wapp_levels: WAPP-4 power levels: 1.100 1.088 0.958 0.967 2008-Apr-28 23:06:40 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.825 and 1.125 2008-Apr-28 23:06:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.733 < 0.8)! 2008-Apr-28 23:06:42 LOG4 check_wapp_levels: WAPP-1 power levels: 0.944 0.733 0.925 1.124 2008-Apr-28 23:06:42 LOG4 check_wapp_levels: WAPP-2 power levels: 1.065 0.981 1.053 1.107 2008-Apr-28 23:06:42 LOG4 check_wapp_levels: WAPP-3 power levels: 0.978 1.010 1.084 0.934 2008-Apr-28 23:06:42 LOG4 check_wapp_levels: WAPP-4 power levels: 1.101 1.089 0.960 0.968 2008-Apr-28 23:06:44 INFO5 check_wapp_levels: WAPP power levels are between 0.699 and 1.123 (still bad) 2008-Apr-28 23:06:46 INFO5 check_wapp_levels: WAPP power levels are between 0.786 and 1.123 (still bad) 2008-Apr-28 23:06:48 INFO5 check_wapp_levels: WAPP power levels are between 0.737 and 1.122 (still bad) 2008-Apr-28 23:06:50 INFO5 check_wapp_levels: WAPP power levels are between 0.573 and 1.122 (still bad) 2008-Apr-28 23:06:52 INFO5 check_wapp_levels: WAPP power levels are between 0.651 and 1.122 (still bad) 2008-Apr-28 23:06:54 INFO5 check_wapp_levels: WAPP power levels are between 0.628 and 1.120 (still bad) 2008-Apr-28 23:06:56 INFO5 check_wapp_levels: WAPP power levels are between 0.650 and 1.121 (still bad) 2008-Apr-28 23:06:58 INFO5 check_wapp_levels: WAPP power levels are between 0.754 and 1.123 (still bad) 2008-Apr-28 23:07:00 INFO5 check_wapp_levels: WAPP power levels are between 0.742 and 1.122 (still bad) 2008-Apr-28 23:07:02 INFO5 check_wapp_levels: WAPP power levels are between 0.669 and 1.122 (still bad) 2008-Apr-28 23:07:04 INFO5 check_wapp_levels: WAPP power levels are between 0.797 and 1.124 (still bad) 2008-Apr-28 23:07:06 INFO5 check_wapp_levels: WAPP power levels are between 0.683 and 1.121 (still bad) 2008-Apr-28 23:07:08 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.851 and 1.123 2008-Apr-28 23:07:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.623 < 0.8)! 2008-Apr-28 23:07:10 LOG4 check_wapp_levels: WAPP-1 power levels: 0.943 0.623 0.924 1.122 2008-Apr-28 23:07:10 LOG4 check_wapp_levels: WAPP-2 power levels: 1.065 0.979 1.053 1.105 2008-Apr-28 23:07:10 LOG4 check_wapp_levels: WAPP-3 power levels: 0.975 1.009 1.084 0.934 2008-Apr-28 23:07:10 LOG4 check_wapp_levels: WAPP-4 power levels: 1.101 1.090 0.960 0.969 2008-Apr-28 23:07:12 INFO5 check_wapp_levels: WAPP power levels are between 0.788 and 1.122 (still bad) 2008-Apr-28 23:07:14 INFO5 check_wapp_levels: WAPP power levels are between 0.798 and 1.124 (still bad) 2008-Apr-28 23:07:16 INFO5 check_wapp_levels: WAPP power levels are between 0.679 and 1.123 (still bad) 2008-Apr-28 23:07:18 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.853 and 1.125 2008-Apr-28 23:07:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.771 < 0.8)! 2008-Apr-28 23:07:21 LOG4 check_wapp_levels: WAPP-1 power levels: 0.944 0.771 0.923 1.125 2008-Apr-28 23:07:21 LOG4 check_wapp_levels: WAPP-2 power levels: 1.061 0.980 1.052 1.105 2008-Apr-28 23:07:21 LOG4 check_wapp_levels: WAPP-3 power levels: 0.976 1.009 1.083 0.932 2008-Apr-28 23:07:21 LOG4 check_wapp_levels: WAPP-4 power levels: 1.102 1.087 0.960 0.967 2008-Apr-28 23:07:23 INFO5 check_wapp_levels: WAPP power levels are between 0.795 and 1.124 (still bad) 2008-Apr-28 23:07:25 INFO5 check_wapp_levels: WAPP power levels are between 0.690 and 1.124 (still bad) 2008-Apr-28 23:07:27 INFO5 check_wapp_levels: WAPP power levels are between 0.771 and 1.124 (still bad) 2008-Apr-28 23:07:29 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.834 and 1.123 2008-Apr-28 23:07:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.699 < 0.8)! 2008-Apr-28 23:07:31 LOG4 check_wapp_levels: WAPP-1 power levels: 0.940 0.699 0.924 1.124 2008-Apr-28 23:07:31 LOG4 check_wapp_levels: WAPP-2 power levels: 1.064 0.980 1.053 1.105 2008-Apr-28 23:07:31 LOG4 check_wapp_levels: WAPP-3 power levels: 0.974 1.008 1.087 0.938 2008-Apr-28 23:07:31 LOG4 check_wapp_levels: WAPP-4 power levels: 1.103 1.089 0.961 0.968 2008-Apr-28 23:07:33 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.812 and 1.125 2008-Apr-28 23:07:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.759 < 0.8)! 2008-Apr-28 23:07:41 LOG4 check_wapp_levels: WAPP-1 power levels: 0.943 0.759 0.922 1.123 2008-Apr-28 23:07:41 LOG4 check_wapp_levels: WAPP-2 power levels: 1.062 0.979 1.053 1.105 2008-Apr-28 23:07:41 LOG4 check_wapp_levels: WAPP-3 power levels: 0.974 1.008 1.089 0.937 2008-Apr-28 23:07:41 LOG4 check_wapp_levels: WAPP-4 power levels: 1.100 1.089 0.960 0.968 2008-Apr-28 23:07:43 INFO5 check_wapp_levels: WAPP power levels are between 0.707 and 1.124 (still bad) 2008-Apr-28 23:07:45 INFO5 check_wapp_levels: WAPP power levels are between 0.749 and 1.124 (still bad) 2008-Apr-28 23:07:47 INFO5 check_wapp_levels: WAPP power levels are between 0.771 and 1.124 (still bad) 2008-Apr-28 23:07:49 INFO5 check_wapp_levels: WAPP power levels are between 0.620 and 1.124 (still bad) 2008-Apr-28 23:07:51 INFO5 check_wapp_levels: WAPP power levels are between 0.695 and 1.124 (still bad) 2008-Apr-28 23:07:53 INFO5 check_wapp_levels: WAPP power levels are between 0.604 and 1.123 (still bad) 2008-Apr-28 23:07:55 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.807 and 1.122 2008-Apr-28 23:07:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.699 < 0.8)! 2008-Apr-28 23:07:57 LOG4 check_wapp_levels: WAPP-1 power levels: 0.948 0.699 0.920 1.123 2008-Apr-28 23:07:57 LOG4 check_wapp_levels: WAPP-2 power levels: 1.064 0.979 1.052 1.104 2008-Apr-28 23:07:57 LOG4 check_wapp_levels: WAPP-3 power levels: 0.973 1.007 1.083 0.933 2008-Apr-28 23:07:57 LOG4 check_wapp_levels: WAPP-4 power levels: 1.100 1.088 0.959 0.968 2008-Apr-28 23:07:59 INFO5 check_wapp_levels: WAPP power levels are between 0.561 and 1.121 (still bad) 2008-Apr-28 23:08:01 INFO5 check_wapp_levels: WAPP power levels are between 0.691 and 1.119 (still bad) 2008-Apr-28 23:08:03 INFO5 check_wapp_levels: WAPP power levels are between 0.686 and 1.120 (still bad) 2008-Apr-28 23:08:05 INFO5 check_wapp_levels: WAPP power levels are between 0.746 and 1.119 (still bad) 2008-Apr-28 23:08:07 INFO5 check_wapp_levels: WAPP power levels are between 0.776 and 1.119 (still bad) 2008-Apr-28 23:08:09 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.840 and 1.119 2008-Apr-28 23:08:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.690 < 0.8)! 2008-Apr-28 23:08:31 LOG4 check_wapp_levels: WAPP-1 power levels: 0.939 0.690 0.915 1.116 2008-Apr-28 23:08:31 LOG4 check_wapp_levels: WAPP-2 power levels: 1.064 0.979 1.053 1.104 2008-Apr-28 23:08:31 LOG4 check_wapp_levels: WAPP-3 power levels: 0.973 1.007 1.083 0.933 2008-Apr-28 23:08:31 LOG4 check_wapp_levels: WAPP-4 power levels: 1.102 1.088 0.959 0.968 2008-Apr-28 23:08:33 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.815 and 1.114 2008-Apr-28 23:08:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.522 < 0.8)! 2008-Apr-28 23:08:48 LOG4 check_wapp_levels: WAPP-1 power levels: 0.939 0.522 0.915 1.114 2008-Apr-28 23:08:48 LOG4 check_wapp_levels: WAPP-2 power levels: 1.066 0.980 1.052 1.104 2008-Apr-28 23:08:48 LOG4 check_wapp_levels: WAPP-3 power levels: 0.974 1.009 1.080 0.933 2008-Apr-28 23:08:48 LOG4 check_wapp_levels: WAPP-4 power levels: 1.101 1.090 0.958 0.968 2008-Apr-28 23:08:50 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.116 (still bad) 2008-Apr-28 23:08:52 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.116 (still bad) 2008-Apr-28 23:08:54 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.115 (still bad) 2008-Apr-28 23:08:56 INFO5 check_wapp_levels: WAPP power levels are between 0.712 and 1.116 (still bad) 2008-Apr-28 23:08:58 INFO5 check_wapp_levels: WAPP power levels are between 0.623 and 1.116 (still bad) 2008-Apr-28 23:09:00 INFO5 check_wapp_levels: WAPP power levels are between 0.667 and 1.116 (still bad) 2008-Apr-28 23:09:02 INFO5 check_wapp_levels: WAPP power levels are between 0.630 and 1.116 (still bad) 2008-Apr-28 23:09:04 INFO5 check_wapp_levels: WAPP power levels are between 0.578 and 1.116 (still bad) 2008-Apr-28 23:09:06 INFO5 check_wapp_levels: WAPP power levels are between 0.608 and 1.114 (still bad) 2008-Apr-28 23:09:08 INFO5 check_wapp_levels: WAPP power levels are between 0.654 and 1.114 (still bad) 2008-Apr-28 23:09:10 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.852 and 1.116 2008-Apr-28 23:09:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.674 < 0.8)! 2008-Apr-28 23:09:12 LOG4 check_wapp_levels: WAPP-1 power levels: 0.944 0.674 0.922 1.116 2008-Apr-28 23:09:12 LOG4 check_wapp_levels: WAPP-2 power levels: 1.064 0.979 1.054 1.104 2008-Apr-28 23:09:12 LOG4 check_wapp_levels: WAPP-3 power levels: 0.974 1.008 1.082 0.935 2008-Apr-28 23:09:12 LOG4 check_wapp_levels: WAPP-4 power levels: 1.107 1.093 0.964 0.971 2008-Apr-28 23:09:14 INFO5 check_wapp_levels: WAPP power levels are between 0.773 and 1.117 (still bad) 2008-Apr-28 23:09:16 INFO5 check_wapp_levels: WAPP power levels are between 0.796 and 1.119 (still bad) 2008-Apr-28 23:09:18 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.901 and 1.118 2008-Apr-28 23:09:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.771 < 0.8)! 2008-Apr-28 23:09:20 LOG4 check_wapp_levels: WAPP-1 power levels: 0.947 0.771 0.924 1.120 2008-Apr-28 23:09:20 LOG4 check_wapp_levels: WAPP-2 power levels: 1.066 0.981 1.052 1.104 2008-Apr-28 23:09:20 LOG4 check_wapp_levels: WAPP-3 power levels: 0.976 1.008 1.084 0.934 2008-Apr-28 23:09:20 LOG4 check_wapp_levels: WAPP-4 power levels: 1.105 1.091 0.962 0.971 2008-Apr-28 23:09:22 INFO5 check_wapp_levels: WAPP power levels are between 0.685 and 1.119 (still bad) 2008-Apr-28 23:09:24 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.833 and 1.119 2008-Apr-28 23:09:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.619 < 0.8)! 2008-Apr-28 23:09:28 LOG4 check_wapp_levels: WAPP-1 power levels: 0.954 0.619 0.919 1.119 2008-Apr-28 23:09:28 LOG4 check_wapp_levels: WAPP-2 power levels: 1.066 0.982 1.054 1.104 2008-Apr-28 23:09:28 LOG4 check_wapp_levels: WAPP-3 power levels: 0.976 1.010 1.083 0.936 2008-Apr-28 23:09:28 LOG4 check_wapp_levels: WAPP-4 power levels: 1.103 1.087 0.960 0.967 2008-Apr-28 23:09:30 INFO5 check_wapp_levels: WAPP power levels are between 0.651 and 1.119 (still bad) 2008-Apr-28 23:09:32 INFO5 check_wapp_levels: WAPP power levels are between 0.625 and 1.119 (still bad) 2008-Apr-28 23:09:34 INFO5 check_wapp_levels: WAPP power levels are between 0.699 and 1.118 (still bad) 2008-Apr-28 23:09:36 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.856 and 1.119 2008-Apr-28 23:09:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.796 < 0.8)! 2008-Apr-28 23:09:44 LOG4 check_wapp_levels: WAPP-1 power levels: 0.940 0.796 0.917 1.118 2008-Apr-28 23:09:44 LOG4 check_wapp_levels: WAPP-2 power levels: 1.066 0.986 1.052 1.104 2008-Apr-28 23:09:44 LOG4 check_wapp_levels: WAPP-3 power levels: 0.975 1.007 1.084 0.936 2008-Apr-28 23:09:44 LOG4 check_wapp_levels: WAPP-4 power levels: 1.102 1.089 0.960 0.968 2008-Apr-28 23:09:46 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.822 and 1.118 2008-Apr-28 23:09:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.593 < 0.8)! 2008-Apr-28 23:09:48 LOG4 check_wapp_levels: WAPP-1 power levels: 0.943 0.593 0.918 1.117 2008-Apr-28 23:09:48 LOG4 check_wapp_levels: WAPP-2 power levels: 1.074 0.991 1.052 1.105 2008-Apr-28 23:09:48 LOG4 check_wapp_levels: WAPP-3 power levels: 0.975 1.008 1.084 0.937 2008-Apr-28 23:09:48 LOG4 check_wapp_levels: WAPP-4 power levels: 1.104 1.090 0.961 0.970 2008-Apr-28 23:09:50 INFO5 check_wapp_levels: WAPP power levels are between 0.658 and 1.116 (still bad) 2008-Apr-28 23:09:52 INFO5 check_wapp_levels: WAPP power levels are between 0.788 and 1.119 (still bad) 2008-Apr-28 23:09:54 INFO5 check_wapp_levels: WAPP power levels are between 0.703 and 1.118 (still bad) 2008-Apr-28 23:09:56 INFO5 check_wapp_levels: WAPP power levels are between 0.701 and 1.118 (still bad) 2008-Apr-28 23:09:58 INFO5 check_wapp_levels: WAPP power levels are between 0.711 and 1.117 (still bad) 2008-Apr-28 23:10:00 INFO5 check_wapp_levels: WAPP power levels are between 0.659 and 1.117 (still bad) 2008-Apr-28 23:10:02 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.848 and 1.118 2008-Apr-28 23:10:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.576 < 0.8)! 2008-Apr-28 23:10:08 LOG4 check_wapp_levels: WAPP-1 power levels: 0.945 0.576 0.925 1.118 2008-Apr-28 23:10:08 LOG4 check_wapp_levels: WAPP-2 power levels: 1.068 0.984 1.054 1.104 2008-Apr-28 23:10:08 LOG4 check_wapp_levels: WAPP-3 power levels: 0.984 1.015 1.085 0.938 2008-Apr-28 23:10:08 LOG4 check_wapp_levels: WAPP-4 power levels: 1.104 1.091 0.962 0.970 2008-Apr-28 23:10:10 INFO5 check_wapp_levels: WAPP power levels are between 0.761 and 1.119 (still bad) 2008-Apr-28 23:10:12 INFO5 check_wapp_levels: WAPP power levels are between 0.649 and 1.121 (still bad) 2008-Apr-28 23:10:14 INFO5 check_wapp_levels: WAPP power levels are between 0.726 and 1.122 (still bad) 2008-Apr-28 23:10:17 INFO5 check_wapp_levels: WAPP power levels are between 0.589 and 1.123 (still bad) 2008-Apr-28 23:10:19 INFO5 check_wapp_levels: WAPP power levels are between 0.776 and 1.123 (still bad) 2008-Apr-28 23:10:21 INFO5 check_wapp_levels: WAPP power levels are between 0.738 and 1.124 (still bad) 2008-Apr-28 23:10:23 INFO5 check_wapp_levels: WAPP power levels are between 0.771 and 1.123 (still bad) 2008-Apr-28 23:10:25 INFO5 check_wapp_levels: WAPP power levels are between 0.698 and 1.123 (still bad) 2008-Apr-28 23:10:27 INFO5 check_wapp_levels: WAPP power levels are between 0.580 and 1.124 (still bad) 2008-Apr-28 23:10:29 INFO5 check_wapp_levels: WAPP power levels are between 0.732 and 1.124 (still bad) 2008-Apr-28 23:10:31 INFO5 check_wapp_levels: WAPP power levels are between 0.735 and 1.123 (still bad) 2008-Apr-28 23:10:33 INFO5 check_wapp_levels: WAPP power levels are between 0.729 and 1.123 (still bad) 2008-Apr-28 23:10:35 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.829 and 1.125 2008-Apr-28 23:10:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.792 < 0.8)! 2008-Apr-28 23:10:37 LOG4 check_wapp_levels: WAPP-1 power levels: 0.959 0.792 0.931 1.125 2008-Apr-28 23:10:37 LOG4 check_wapp_levels: WAPP-2 power levels: 1.069 0.985 1.054 1.107 2008-Apr-28 23:10:37 LOG4 check_wapp_levels: WAPP-3 power levels: 0.989 1.014 1.085 0.936 2008-Apr-28 23:10:37 LOG4 check_wapp_levels: WAPP-4 power levels: 1.109 1.094 0.965 0.974 2008-Apr-28 23:10:39 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.839 and 1.124 2008-Apr-28 23:10:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.660 < 0.8)! 2008-Apr-28 23:10:43 LOG4 check_wapp_levels: WAPP-1 power levels: 0.954 0.660 0.930 1.123 2008-Apr-28 23:10:43 LOG4 check_wapp_levels: WAPP-2 power levels: 1.065 0.986 1.054 1.106 2008-Apr-28 23:10:43 LOG4 check_wapp_levels: WAPP-3 power levels: 0.988 1.013 1.089 0.936 2008-Apr-28 23:10:43 LOG4 check_wapp_levels: WAPP-4 power levels: 1.109 1.094 0.965 0.974 2008-Apr-28 23:10:45 INFO5 check_wapp_levels: WAPP power levels are between 0.765 and 1.123 (still bad) 2008-Apr-28 23:10:47 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.820 and 1.123 2008-Apr-28 23:10:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.776 < 0.8)! 2008-Apr-28 23:10:49 LOG4 check_wapp_levels: WAPP-1 power levels: 0.953 0.776 0.930 1.124 2008-Apr-28 23:10:49 LOG4 check_wapp_levels: WAPP-2 power levels: 1.067 0.986 1.053 1.106 2008-Apr-28 23:10:49 LOG4 check_wapp_levels: WAPP-3 power levels: 0.988 1.014 1.088 0.937 2008-Apr-28 23:10:49 LOG4 check_wapp_levels: WAPP-4 power levels: 1.109 1.094 0.965 0.974 2008-Apr-28 23:10:51 INFO5 check_wapp_levels: WAPP power levels are between 0.670 and 1.125 (still bad) 2008-Apr-28 23:10:53 INFO5 check_wapp_levels: WAPP power levels are between 0.708 and 1.125 (still bad) 2008-Apr-28 23:10:55 INFO5 check_wapp_levels: WAPP power levels are between 0.782 and 1.125 (still bad) 2008-Apr-28 23:10:57 INFO5 check_wapp_levels: WAPP power levels are between 0.727 and 1.125 (still bad) 2008-Apr-28 23:10:59 INFO5 check_wapp_levels: WAPP power levels are between 0.666 and 1.123 (still bad) 2008-Apr-28 23:11:01 INFO5 check_wapp_levels: WAPP power levels are between 0.677 and 1.125 (still bad) 2008-Apr-28 23:11:03 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.829 and 1.126 2008-Apr-28 23:11:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.672 < 0.8)! 2008-Apr-28 23:11:05 LOG4 check_wapp_levels: WAPP-1 power levels: 0.963 0.672 0.929 1.126 2008-Apr-28 23:11:05 LOG4 check_wapp_levels: WAPP-2 power levels: 1.066 0.986 1.053 1.105 2008-Apr-28 23:11:05 LOG4 check_wapp_levels: WAPP-3 power levels: 0.987 1.013 1.087 0.939 2008-Apr-28 23:11:05 LOG4 check_wapp_levels: WAPP-4 power levels: 1.109 1.093 0.964 0.973 2008-Apr-28 23:11:07 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.804 and 1.126 2008-Apr-28 23:11:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.629 < 0.8)! 2008-Apr-28 23:11:09 LOG4 check_wapp_levels: WAPP-1 power levels: 0.953 0.629 0.929 1.127 2008-Apr-28 23:11:09 LOG4 check_wapp_levels: WAPP-2 power levels: 1.066 0.987 1.054 1.106 2008-Apr-28 23:11:09 LOG4 check_wapp_levels: WAPP-3 power levels: 0.986 1.013 1.087 0.940 2008-Apr-28 23:11:09 LOG4 check_wapp_levels: WAPP-4 power levels: 1.108 1.091 0.963 0.972 2008-Apr-28 23:11:11 INFO5 check_wapp_levels: WAPP power levels are between 0.698 and 1.127 (still bad) 2008-Apr-28 23:11:13 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.819 and 1.125 2008-Apr-28 23:11:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.688 < 0.8)! 2008-Apr-28 23:11:15 LOG4 check_wapp_levels: WAPP-1 power levels: 0.953 0.688 0.928 1.125 2008-Apr-28 23:11:15 LOG4 check_wapp_levels: WAPP-2 power levels: 1.074 0.989 1.054 1.105 2008-Apr-28 23:11:15 LOG4 check_wapp_levels: WAPP-3 power levels: 0.987 1.017 1.088 0.938 2008-Apr-28 23:11:15 LOG4 check_wapp_levels: WAPP-4 power levels: 1.107 1.091 0.963 0.971 2008-Apr-28 23:11:17 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.808 and 1.124 2008-Apr-28 23:11:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.723 < 0.8)! 2008-Apr-28 23:11:19 LOG4 check_wapp_levels: WAPP-1 power levels: 0.951 0.723 0.928 1.126 2008-Apr-28 23:11:19 LOG4 check_wapp_levels: WAPP-2 power levels: 1.074 0.992 1.053 1.104 2008-Apr-28 23:11:19 LOG4 check_wapp_levels: WAPP-3 power levels: 0.985 1.017 1.086 0.938 2008-Apr-28 23:11:19 LOG4 check_wapp_levels: WAPP-4 power levels: 1.107 1.091 0.963 0.970 2008-Apr-28 23:11:21 INFO5 check_wapp_levels: WAPP power levels are between 0.593 and 1.126 (still bad) 2008-Apr-28 23:11:23 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.842 and 1.127 2008-Apr-28 23:11:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.762 < 0.8)! 2008-Apr-28 23:11:29 LOG4 check_wapp_levels: WAPP-1 power levels: 0.952 0.762 0.928 1.125 2008-Apr-28 23:11:29 LOG4 check_wapp_levels: WAPP-2 power levels: 1.073 0.992 1.052 1.105 2008-Apr-28 23:11:29 LOG4 check_wapp_levels: WAPP-3 power levels: 0.997 1.025 1.087 0.936 2008-Apr-28 23:11:29 LOG4 check_wapp_levels: WAPP-4 power levels: 1.107 1.092 0.962 0.971 2008-Apr-28 23:11:31 INFO5 check_wapp_levels: WAPP power levels are between 0.756 and 1.125 (still bad) 2008-Apr-28 23:11:33 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.880 and 1.126 2008-Apr-28 23:11:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.735 < 0.8)! 2008-Apr-28 23:11:44 LOG4 check_wapp_levels: WAPP-1 power levels: 0.957 0.735 0.929 1.125 2008-Apr-28 23:11:44 LOG4 check_wapp_levels: WAPP-2 power levels: 1.066 0.987 1.054 1.106 2008-Apr-28 23:11:44 LOG4 check_wapp_levels: WAPP-3 power levels: 1.001 1.028 1.089 0.936 2008-Apr-28 23:11:44 LOG4 check_wapp_levels: WAPP-4 power levels: 1.106 1.091 0.963 0.971 2008-Apr-28 23:11:46 INFO5 check_wapp_levels: WAPP power levels are between 0.785 and 1.125 (still bad) 2008-Apr-28 23:11:48 INFO5 check_wapp_levels: WAPP power levels are between 0.613 and 1.125 (still bad) 2008-Apr-28 23:11:50 INFO5 check_wapp_levels: WAPP power levels are between 0.788 and 1.123 (still bad) 2008-Apr-28 23:11:52 INFO5 check_wapp_levels: WAPP power levels are between 0.686 and 1.123 (still bad) 2008-Apr-28 23:11:54 INFO5 check_wapp_levels: WAPP power levels are between 0.665 and 1.124 (still bad) 2008-Apr-28 23:11:56 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.873 and 1.123 2008-Apr-28 23:11:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.772 < 0.8)! 2008-Apr-28 23:11:58 LOG4 check_wapp_levels: WAPP-1 power levels: 0.954 0.772 0.925 1.123 2008-Apr-28 23:11:58 LOG4 check_wapp_levels: WAPP-2 power levels: 1.065 0.983 1.054 1.107 2008-Apr-28 23:11:58 LOG4 check_wapp_levels: WAPP-3 power levels: 0.985 1.015 1.083 0.935 2008-Apr-28 23:11:58 LOG4 check_wapp_levels: WAPP-4 power levels: 1.105 1.090 0.962 0.971 2008-Apr-28 23:12:00 INFO5 check_wapp_levels: WAPP power levels are between 0.700 and 1.125 (still bad) 2008-Apr-28 23:12:02 INFO5 check_wapp_levels: WAPP power levels are between 0.758 and 1.125 (still bad) 2008-Apr-28 23:12:04 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.839 and 1.124 2008-Apr-28 23:12:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.550 < 0.8)! 2008-Apr-28 23:12:06 LOG4 check_wapp_levels: WAPP-1 power levels: 0.953 0.550 0.926 1.123 2008-Apr-28 23:12:06 LOG4 check_wapp_levels: WAPP-2 power levels: 1.066 0.982 1.056 1.110 2008-Apr-28 23:12:06 LOG4 check_wapp_levels: WAPP-3 power levels: 0.980 1.010 1.083 0.935 2008-Apr-28 23:12:06 LOG4 check_wapp_levels: WAPP-4 power levels: 1.105 1.089 0.963 0.970 2008-Apr-28 23:12:08 INFO5 check_wapp_levels: WAPP power levels are between 0.782 and 1.124 (still bad) 2008-Apr-28 23:12:10 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.804 and 1.123 2008-Apr-28 23:12:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.728 < 0.8)! 2008-Apr-28 23:12:12 LOG4 check_wapp_levels: WAPP-1 power levels: 0.949 0.728 0.926 1.123 2008-Apr-28 23:12:12 LOG4 check_wapp_levels: WAPP-2 power levels: 1.064 0.983 1.059 1.112 2008-Apr-28 23:12:12 LOG4 check_wapp_levels: WAPP-3 power levels: 0.982 1.009 1.084 0.935 2008-Apr-28 23:12:12 LOG4 check_wapp_levels: WAPP-4 power levels: 1.104 1.090 0.962 0.971 2008-Apr-28 23:12:14 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.822 and 1.123 2008-Apr-28 23:12:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.750 < 0.8)! 2008-Apr-28 23:12:18 LOG4 check_wapp_levels: WAPP-1 power levels: 0.952 0.750 0.925 1.124 2008-Apr-28 23:12:18 LOG4 check_wapp_levels: WAPP-2 power levels: 1.066 0.983 1.060 1.111 2008-Apr-28 23:12:18 LOG4 check_wapp_levels: WAPP-3 power levels: 0.980 1.007 1.086 0.935 2008-Apr-28 23:12:18 LOG4 check_wapp_levels: WAPP-4 power levels: 1.106 1.091 0.964 0.971 2008-Apr-28 23:12:20 INFO5 check_wapp_levels: WAPP power levels are between 0.638 and 1.123 (still bad) 2008-Apr-28 23:12:22 INFO5 check_wapp_levels: WAPP power levels are between 0.740 and 1.121 (still bad) 2008-Apr-28 23:12:24 INFO5 check_wapp_levels: WAPP power levels are between 0.763 and 1.123 (still bad) 2008-Apr-28 23:12:26 INFO5 check_wapp_levels: WAPP power levels are between 0.711 and 1.122 (still bad) 2008-Apr-28 23:12:28 INFO5 check_wapp_levels: WAPP power levels are between 0.624 and 1.122 (still bad) 2008-Apr-28 23:12:30 INFO5 check_wapp_levels: WAPP power levels are between 0.739 and 1.122 (still bad) 2008-Apr-28 23:12:32 INFO5 check_wapp_levels: WAPP power levels are between 0.735 and 1.121 (still bad) 2008-Apr-28 23:12:34 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.842 and 1.122 2008-Apr-28 23:12:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.756 < 0.8)! 2008-Apr-28 23:12:36 LOG4 check_wapp_levels: WAPP-1 power levels: 0.946 0.756 0.926 1.120 2008-Apr-28 23:12:36 LOG4 check_wapp_levels: WAPP-2 power levels: 1.066 0.981 1.055 1.105 2008-Apr-28 23:12:36 LOG4 check_wapp_levels: WAPP-3 power levels: 0.977 1.007 1.084 0.935 2008-Apr-28 23:12:36 LOG4 check_wapp_levels: WAPP-4 power levels: 1.104 1.091 0.964 0.973 2008-Apr-28 23:12:38 INFO5 check_wapp_levels: WAPP power levels are between 0.638 and 1.120 (still bad) 2008-Apr-28 23:12:40 INFO5 check_wapp_levels: WAPP power levels are between 0.739 and 1.119 (still bad) 2008-Apr-28 23:12:42 INFO5 check_wapp_levels: WAPP power levels are between 0.796 and 1.121 (still bad) 2008-Apr-28 23:12:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-28 23:12:43 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-28 23:12:43 LOG5 end_task: Level: (4) ID = <10480> Status = 0 0 0 0 ok 2008-Apr-28 23:12:43 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-28 23:12:43 LOG5 end_task: Level: (3) ID = <10479> Status = 0 0 0 0 ok 2008-Apr-28 23:12:43 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-28 23:12:43 LOG5 finish_task: Level: (2) ID = <10446> Status = 0 0 0 0 ok 2008-Apr-28 23:12:43 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-28 23:12:43 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-28 23:12:43 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-28 23:12:43 LOG5 end_task: Level: (2) ID = <10446> Status = 0 0 0 0 ok 2008-Apr-28 23:12:43 COMMAND run_command_line: EXECUTING command 51: 'FIXEDDRIFT az=47.62 alfaangle=-21.5 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p1_065 ra=122900.00 dec=72400.00' 2008-Apr-28 23:12:43 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-28 23:12:44 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-28 23:12:44 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 47.62 -21.5 hcorcal 5 tracking no first 1 AGESVC1B_p1_065 122900.00 72400.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-28 23:12:44 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-28 23:12:44 LOG5 begin_task: Level: (2) ID = <10481> Status = 0 0 0 0 ok 2008-Apr-28 23:12:44 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGESVC1A_p2_056' 2008-Apr-28 23:12:44 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-28 23:12:44 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1B_p1_065} 2008-Apr-28 23:12:44 INFO3 fixed_driftmap: Sending telescope to Az = 47.62 and ZA = 15.87 2008-Apr-28 23:12:44 LOG3 track_source: Calling 'track_source AGESVC1B_p1_065 47.62 15.8685331561 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-28 23:12:44 START begin_task: Starting task 'sending tracking commands' 2008-Apr-28 23:12:44 LOG5 begin_task: Level: (3) ID = <10482> Status = 0 0 0 0 ok 2008-Apr-28 23:12:44 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p1_065} INFO {Slewing to source 'AGESVC1B_p1_065' ...} 2008-Apr-28 23:12:44 INFO1 track_source: Starting to track AGESVC1B_p1_065 2008-Apr-28 23:12:44 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p1_065" 2008-Apr-28 23:12:44 LOG3 vw_send: To DATATAKING: set ra 47.62 2008-Apr-28 23:12:44 LOG3 vw_send: To DATATAKING: set dec 15.8685331561 2008-Apr-28 23:12:44 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-28 23:12:44 LOG3 vw_send: To DATATAKING: pnt tr 47.62 15.8685331561 -CF 2008-Apr-28 23:12:44 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-28 23:12:44 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-28 23:12:44 LOG5 finish_task: Level: (3) ID = <10482> Status = 0 0 0 0 ok 2008-Apr-28 23:12:44 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-28 23:12:44 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 23:12:44 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-28 23:12:44 LOG5 end_task: Level: (3) ID = <10482> Status = 0 0 0 0 ok 2008-Apr-28 23:12:44 START begin_task: Starting task 'rotate ALFA to -21.5 degrees' 2008-Apr-28 23:12:44 LOG5 begin_task: Level: (3) ID = <10483> Status = 0 0 0 0 ok 2008-Apr-28 23:12:44 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -21.5 degrees ...} 2008-Apr-28 23:12:44 INFO2 rotate_alfa: ALFA commanded to -21.5 degrees 2008-Apr-28 23:12:44 LOG3 sock_errsend: To ALFAMOTOR: POSITION -21.5 REPLY 2008-Apr-28 23:12:44 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-28 23:12:44 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-28 23:12:44 LOG5 begin_task: Level: (4) ID = <10484> Status = 0 0 0 0 ok 2008-Apr-28 23:12:44 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p1_065" 2008-Apr-28 23:12:44 LOG4 got_cormsg: From DATATAKING: set ra 47.62 2008-Apr-28 23:12:44 LOG4 got_cormsg: From DATATAKING: set dec 15.8685331561 2008-Apr-28 23:12:44 LOG4 got_cormsg: From DATATAKING: vw% 47.62 2008-Apr-28 23:12:44 LOG4 got_cormsg: From DATATAKING: vw% 15.8685331561 2008-Apr-28 23:12:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 23:12:44 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-28 23:12:44 LOG4 got_cormsg: From DATATAKING: pnt tr 47.62 15.8685331561 -CF 2008-Apr-28 23:12:44 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-28 23:12:44 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-28 23:12:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 23:12:44 INFO5 check_wapp_levels: WAPP power levels are between 0.679 and 1.121 (still bad) 2008-Apr-28 23:12:45 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-28 23:12:45 INFO3 alfa_motor: ALFA rotator in-position -21.50 degrees 2008-Apr-28 23:12:46 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-28 23:12:46 LOG5 end_task: Level: (4) ID = <10484> Status = 0 0 0 0 ok 2008-Apr-28 23:12:46 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-28 23:12:46 STOP finish_task: Finishing task 'rotate ALFA to -21.5 degrees' 2008-Apr-28 23:12:46 LOG5 finish_task: Level: (3) ID = <10483> Status = 0 0 0 0 ok 2008-Apr-28 23:12:46 INFO2 finish_task: DONE finished configuration: rotating ALFA to -21.5 degrees 2008-Apr-28 23:12:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 23:12:46 STOP end_task: Finishing task 'rotate ALFA to -21.5 degrees' with status 'OK' 2008-Apr-28 23:12:46 LOG5 end_task: Level: (3) ID = <10483> Status = 0 0 0 0 ok 2008-Apr-28 23:12:46 START begin_task: Starting task 'waiting on telescope' 2008-Apr-28 23:12:46 LOG5 begin_task: Level: (3) ID = <10485> Status = 0 0 0 0 ok 2008-Apr-28 23:12:46 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-28 23:12:46 LOG3 waittrk: Start waittrk 5 2008-Apr-28 23:12:46 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-28 23:12:46 LOG5 begin_task: Level: (4) ID = <10486> Status = 0 0 0 0 ok 2008-Apr-28 23:12:51 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-28 23:12:51 LOG5 end_task: Level: (4) ID = <10486> Status = 0 0 0 0 ok 2008-Apr-28 23:12:51 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-28 23:12:51 LOG5 begin_task: Level: (4) ID = <10487> Status = 0 0 0 0 ok 2008-Apr-28 23:13:02 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-28 23:13:02 LOG5 end_task: Level: (4) ID = <10487> Status = 0 0 0 0 ok 2008-Apr-28 23:13:02 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-28 23:13:02 INFO2 waittrk: Now tracking AGESVC1B_p1_065 2008-Apr-28 23:13:02 LOG4 waittrk: Current telescope position: Az = 407.40 ZA = 15.86 2008-Apr-28 23:13:02 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-28 23:13:02 LOG5 finish_task: Level: (3) ID = <10485> Status = 0 0 0 0 ok 2008-Apr-28 23:13:02 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-28 23:13:02 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 23:13:02 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-28 23:13:02 LOG5 end_task: Level: (3) ID = <10485> Status = 0 0 0 0 ok 2008-Apr-28 23:13:02 START begin_task: Starting task 'selecting calibration type' 2008-Apr-28 23:13:02 LOG5 begin_task: Level: (3) ID = <10488> Status = 0 0 0 0 ok 2008-Apr-28 23:13:02 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-28 23:13:02 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-28 23:13:02 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 23:13:02 START begin_task: Starting task 'waiting on setcal' 2008-Apr-28 23:13:02 LOG5 begin_task: Level: (4) ID = <10489> Status = 0 0 0 0 ok 2008-Apr-28 23:13:02 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-28 23:13:02 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 23:13:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 23:13:03 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-28 23:13:03 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-28 23:13:03 LOG5 end_task: Level: (4) ID = <10489> Status = 0 0 0 0 ok 2008-Apr-28 23:13:03 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-28 23:13:03 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-28 23:13:03 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-28 23:13:03 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-28 23:13:03 LOG5 begin_task: Level: (4) ID = <10490> Status = 0 0 0 0 ok 2008-Apr-28 23:13:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 23:13:03 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-28 23:13:03 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-28 23:13:03 LOG5 end_task: Level: (4) ID = <10490> Status = 0 0 0 0 ok 2008-Apr-28 23:13:03 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-28 23:13:03 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-28 23:13:03 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-28 23:13:03 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-28 23:13:03 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-28 23:13:03 LOG5 begin_task: Level: (4) ID = <10491> Status = 0 0 0 0 ok 2008-Apr-28 23:13:03 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-28 23:13:03 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-28 23:13:03 LOG5 end_task: Level: (4) ID = <10491> Status = 0 0 0 0 ok 2008-Apr-28 23:13:03 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-28 23:13:03 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-28 23:13:03 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-28 23:13:03 LOG5 finish_task: Level: (3) ID = <10488> Status = 0 0 0 0 ok 2008-Apr-28 23:13:03 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-28 23:13:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 23:13:04 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-28 23:13:04 LOG5 end_task: Level: (3) ID = <10488> Status = 0 0 0 0 ok 2008-Apr-28 23:13:04 LOG5 dopset_later: Calling 'dopset_later 36.419603500037226' 2008-Apr-28 23:13:04 INFO3 dopset_later: Setting Doppler correction for 23:13:39 (36.4 seconds from now) 2008-Apr-28 23:13:04 LOG5 antvel: Calling 'antvel 47.620000 15.868533 F 36.419603500037226' 2008-Apr-28 23:13:04 LOG2 antvel: Parameters to Doppler: Heliocentric 98019 2008 119 0.0 2008-Apr-28 23:13:04 INFO5 antvel: Computed antenna velocity: +16.59230 km/s 2008-Apr-28 23:13:04 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=16.592298742699999 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-28 23:13:04 INFO4 dopset_gen: New sky frequencies: 1381.166987 1381.166987 1381.166987 1381.166987 1381.166987 1381.166987 1381.166987 1381.166987 1381.166987 2008-Apr-28 23:13:04 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.166987 sky0=1381.166987 sky1=1381.166987 sky2=1381.166987 sky3=1381.166987 sky4=1381.166987 sky5=1381.166987 sky6=1381.166987 sky7=1381.166987 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-28 23:13:04 LOG2 dopset_gen: Result from 'sky2syn': 1631.166987 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-28 23:13:04 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631166987.0} 2008-Apr-28 23:13:04 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 23:13:04 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-28 23:13:04 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-28 23:13:04 INFO5 fixed_driftmap: Tracking J2000 position: RA = 12:28:28.2 Dec = +07:23:50.8 2008-Apr-28 23:13:04 LOG3 track_source: Calling 'track_source AGESVC1B_p1_065 122828.2 072350.8 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-28 23:13:04 START begin_task: Starting task 'sending tracking commands' 2008-Apr-28 23:13:04 LOG5 begin_task: Level: (3) ID = <10492> Status = 0 0 0 0 ok 2008-Apr-28 23:13:04 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p1_065} INFO {Slewing to source 'AGESVC1B_p1_065' ...} 2008-Apr-28 23:13:04 INFO1 track_source: Starting to track AGESVC1B_p1_065 2008-Apr-28 23:13:04 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p1_065" 2008-Apr-28 23:13:04 LOG3 vw_send: To DATATAKING: set ra 122828.2 2008-Apr-28 23:13:04 LOG3 vw_send: To DATATAKING: set dec 072350.8 2008-Apr-28 23:13:04 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-28 23:13:04 LOG3 vw_send: To DATATAKING: pnt tr 122828.2 072350.8 -CJ 2008-Apr-28 23:13:04 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-28 23:13:04 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-28 23:13:04 LOG5 finish_task: Level: (3) ID = <10492> Status = 0 0 0 0 ok 2008-Apr-28 23:13:04 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-28 23:13:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 23:13:04 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-28 23:13:04 LOG5 end_task: Level: (3) ID = <10492> Status = 0 0 0 0 ok 2008-Apr-28 23:13:04 START begin_task: Starting task 'waiting on telescope' 2008-Apr-28 23:13:04 LOG5 begin_task: Level: (3) ID = <10493> Status = 0 0 0 0 ok 2008-Apr-28 23:13:04 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-28 23:13:04 LOG3 waittrk: Start waittrk 5 2008-Apr-28 23:13:04 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-28 23:13:04 LOG5 begin_task: Level: (4) ID = <10494> Status = 0 0 0 0 ok 2008-Apr-28 23:13:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631166987.0} 2008-Apr-28 23:13:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-28 23:13:04 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 23:13:04 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p1_065" 2008-Apr-28 23:13:04 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-28 23:13:04 LOG4 got_cormsg: From DATATAKING: set ra 122828.2 2008-Apr-28 23:13:04 LOG4 got_cormsg: From DATATAKING: set dec 072350.8 2008-Apr-28 23:13:04 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-28 23:13:04 LOG4 got_cormsg: From DATATAKING: pnt tr 122828.2 072350.8 -CJ 2008-Apr-28 23:13:04 LOG4 got_cormsg: From DATATAKING: 122828.2 2008-Apr-28 23:13:04 LOG4 got_cormsg: From DATATAKING: vw% 072350.8 2008-Apr-28 23:13:04 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2008-Apr-28 23:13:04 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-28 23:13:04 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 23:13:09 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-28 23:13:09 LOG5 end_task: Level: (4) ID = <10494> Status = 0 0 0 0 ok 2008-Apr-28 23:13:09 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-28 23:13:09 LOG5 begin_task: Level: (4) ID = <10495> Status = 0 0 0 0 ok 2008-Apr-28 23:13:11 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-28 23:13:11 LOG5 end_task: Level: (4) ID = <10495> Status = 0 0 0 0 ok 2008-Apr-28 23:13:11 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-28 23:13:11 INFO2 waittrk: Now tracking AGESVC1B_p1_065 2008-Apr-28 23:13:11 LOG4 waittrk: Current telescope position: Az = 407.43 ZA = 15.87 2008-Apr-28 23:13:11 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-28 23:13:11 LOG5 finish_task: Level: (3) ID = <10493> Status = 0 0 0 0 ok 2008-Apr-28 23:13:11 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-28 23:13:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 23:13:11 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-28 23:13:11 LOG5 end_task: Level: (3) ID = <10493> Status = 0 0 0 0 ok 2008-Apr-28 23:13:11 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-28 23:13:11 LOG5 begin_task: Level: (3) ID = <10496> Status = 0 0 0 0 ok 2008-Apr-28 23:13:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-28 23:13:11 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-28 23:13:11 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-28 23:13:11 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-28 23:13:11 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 23:13:11 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-28 23:13:11 LOG5 begin_task: Level: (4) ID = <10497> Status = 0 0 0 0 ok 2008-Apr-28 23:13:11 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-28 23:13:11 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 23:13:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 23:13:12 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-28 23:13:12 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-28 23:13:12 LOG5 end_task: Level: (4) ID = <10497> Status = 0 0 0 0 ok 2008-Apr-28 23:13:12 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-28 23:13:12 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-28 23:13:12 LOG5 begin_task: Level: (4) ID = <10498> Status = 0 0 0 0 ok 2008-Apr-28 23:13:12 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-28 23:13:12 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-28 23:13:12 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-28 23:13:12 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-28 23:13:12 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-28 23:13:12 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-28 23:13:12 LOG5 begin_task: Level: (5) ID = <10499> Status = 0 0 0 0 ok 2008-Apr-28 23:13:12 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-28 23:13:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 23:13:12 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 0 dB --- beam 1: 8 7 dB 2008-Apr-28 23:13:12 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 7 4 dB --- beam 3: 4 3 dB 2008-Apr-28 23:13:12 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 6 dB 2008-Apr-28 23:13:12 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 3 3 dB 2008-Apr-28 23:13:12 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-28 23:13:12 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-28 23:13:12 LOG5 end_task: Level: (5) ID = <10499> Status = 0 0 0 0 ok 2008-Apr-28 23:13:12 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.960 0.687 ALFA beam 1: 0.931 0.906 2008-Apr-28 23:13:12 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.927 1.086 ALFA beam 3: 1.070 1.120 2008-Apr-28 23:13:12 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.988 1.018 ALFA beam 5: 1.092 0.936 2008-Apr-28 23:13:12 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.107 1.097 ALFA beam 7: 0.966 0.975 2008-Apr-28 23:13:12 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-28 23:13:12 LOG5 finish_task: Level: (4) ID = <10498> Status = 0 0 0 0 ok 2008-Apr-28 23:13:12 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-28 23:13:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 23:13:12 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-28 23:13:12 LOG5 end_task: Level: (4) ID = <10498> Status = 0 0 0 0 ok 2008-Apr-28 23:13:12 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-28 23:13:12 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-28 23:13:12 LOG5 finish_task: Level: (3) ID = <10496> Status = 0 0 0 0 ok 2008-Apr-28 23:13:12 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-28 23:13:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 23:13:12 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-28 23:13:12 LOG5 end_task: Level: (3) ID = <10496> Status = 0 0 0 0 ok 2008-Apr-28 23:13:12 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Steve Schnei 2008-Apr-28 23:13:12 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Steve Schnei 2008-Apr-28 23:13:13 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Steve Schnei 2008-Apr-28 23:13:13 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Steve Schnei 2008-Apr-28 23:13:13 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-28 23:13:13 START begin_task: Starting task 'WAPP calibration' 2008-Apr-28 23:13:13 LOG5 begin_task: Level: (3) ID = <10500> Status = 0 0 0 0 ok 2008-Apr-28 23:13:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-28 23:13:13 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-28 23:13:13 START begin_task: Starting task 'selecting calibration type' 2008-Apr-28 23:13:13 LOG5 begin_task: Level: (4) ID = <10501> Status = 0 0 0 0 ok 2008-Apr-28 23:13:13 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-28 23:13:13 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-28 23:13:13 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 23:13:13 START begin_task: Starting task 'waiting on setcal' 2008-Apr-28 23:13:13 LOG5 begin_task: Level: (5) ID = <10502> Status = 0 0 0 0 ok 2008-Apr-28 23:13:13 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Steve Schnei' 2008-Apr-28 23:13:13 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-28 23:13:13 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-28 23:13:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 23:13:13 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-28 23:13:13 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-28 23:13:13 LOG5 end_task: Level: (5) ID = <10502> Status = 0 0 0 0 ok 2008-Apr-28 23:13:13 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-28 23:13:13 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-28 23:13:13 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-28 23:13:13 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-28 23:13:13 LOG5 begin_task: Level: (5) ID = <10503> Status = 0 0 0 0 ok 2008-Apr-28 23:13:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 23:13:13 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-28 23:13:13 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-28 23:13:13 LOG5 end_task: Level: (5) ID = <10503> Status = 0 0 0 0 ok 2008-Apr-28 23:13:13 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-28 23:13:13 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-28 23:13:13 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-28 23:13:13 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-28 23:13:13 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-28 23:13:13 LOG5 begin_task: Level: (5) ID = <10504> Status = 0 0 0 0 ok 2008-Apr-28 23:13:13 NOTE WAPPDATA-new_file: New FITS file: wapp.20080428.a2048.0012.fits 2008-Apr-28 23:13:13 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-28 23:13:13 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-28 23:13:13 LOG5 end_task: Level: (5) ID = <10504> Status = 0 0 0 0 ok 2008-Apr-28 23:13:13 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-28 23:13:13 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-28 23:13:13 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-28 23:13:13 LOG5 finish_task: Level: (4) ID = <10501> Status = 0 0 0 0 ok 2008-Apr-28 23:13:13 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-28 23:13:13 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 23:13:13 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-28 23:13:13 LOG5 end_task: Level: (4) ID = <10501> Status = 0 0 0 0 ok 2008-Apr-28 23:13:13 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-28 23:13:13 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-28 23:13:13 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-28 23:13:13 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-28 23:13:13 LOG5 begin_task: Level: (4) ID = <10505> Status = 0 0 0 0 ok 2008-Apr-28 23:13:13 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080428.a2048.0012.fits} 2008-Apr-28 23:13:13 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-28 23:13:13 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-28 23:13:13 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-28 23:13:13 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-28 23:13:13 LOG5 end_task: Level: (4) ID = <10505> Status = 0 0 0 0 ok 2008-Apr-28 23:13:13 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-28 23:13:13 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-28 23:13:13 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-28 23:13:13 LOG5 begin_task: Level: (4) ID = <10506> Status = 0 0 0 0 ok 2008-Apr-28 23:13:13 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-28 23:13:13 LOG5 log_alfabeam: Parameters: 12.474499999999999 7.3974444444444458 13.266888 2008.3284531459933 -21.500038 2008-Apr-28 23:13:13 LOG4 log_alfabeam: ALFABEAM 0 12.474500000000001 7.397444444444441 2008-Apr-28 23:13:13 LOG4 log_alfabeam: ALFABEAM 1 12.474284012548585 7.494888444170216 2008-Apr-28 23:13:13 LOG4 log_alfabeam: ALFABEAM 2 12.468601627375039 7.430319603491241 2008-Apr-28 23:13:13 LOG4 log_alfabeam: ALFABEAM 3 12.468835320749681 7.332545154926089 2008-Apr-28 23:13:13 LOG4 log_alfabeam: ALFABEAM 4 12.474758474370994 7.299809735965289 2008-Apr-28 23:13:13 LOG4 log_alfabeam: ALFABEAM 5 12.480399243043479 7.365153693778406 2008-Apr-28 23:13:13 LOG4 log_alfabeam: ALFABEAM 6 12.480158578417640 7.462459288191487 2008-Apr-28 23:13:13 INFO2 take_spectra: Starting WAPP scan: 811900122 2008-Apr-28 23:13:14 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-28 23:13:14 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-28 23:13:14 LOG5 begin_task: Level: (5) ID = <10507> Status = 0 0 0 0 ok 2008-Apr-28 23:13:14 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-28 23:13:14 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11595.00 2008-Apr-28 23:13:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.687 < 0.8)! 2008-Apr-28 23:13:14 LOG4 check_wapp_levels: WAPP-1 power levels: 0.960 0.687 0.931 0.906 2008-Apr-28 23:13:14 LOG4 check_wapp_levels: WAPP-2 power levels: 0.927 1.086 1.070 1.120 2008-Apr-28 23:13:14 LOG4 check_wapp_levels: WAPP-3 power levels: 0.988 1.018 1.092 0.936 2008-Apr-28 23:13:14 LOG4 check_wapp_levels: WAPP-4 power levels: 1.107 1.097 0.966 0.975 2008-Apr-28 23:13:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.166987 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-28 23:13:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.166987 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 23:13:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.166987 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 23:13:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.166987 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 23:13:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.166987 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 23:13:20 LOG3 WAPP=1+3+4-save_rfcalc: Channel 5: Sky freq = 1381.166987 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-28 23:13:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.166987 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-28 23:13:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.166987 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-28 23:13:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.166987 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-28 23:13:20 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-28 23:13:20 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-28 23:13:20 LOG5 end_task: Level: (5) ID = <10507> Status = 0 0 0 0 ok 2008-Apr-28 23:13:20 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-28 23:13:20 LOG5 end_task: Level: (4) ID = <10506> Status = 0 0 0 0 ok 2008-Apr-28 23:13:20 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-28 23:13:20 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-28 23:13:20 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-28 23:13:20 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-28 23:13:20 LOG5 begin_task: Level: (4) ID = <10508> Status = 0 0 0 0 ok 2008-Apr-28 23:13:20 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-28 23:13:20 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-28 23:13:20 INFO5 check_wapp_levels: WAPP power levels are between 1.160 and 1.516 (still bad) 2008-Apr-28 23:13:20 LOG3 WAPP=2-save_rfcalc: Channel 5: Sky freq = 1381.166987 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-28 23:13:20 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-28 23:13:20 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-28 23:13:20 LOG5 end_task: Level: (4) ID = <10508> Status = 0 0 0 0 ok 2008-Apr-28 23:13:20 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-28 23:13:20 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-28 23:13:20 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-28 23:13:20 LOG5 begin_task: Level: (4) ID = <10509> Status = 0 0 0 0 ok 2008-Apr-28 23:13:20 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-28 23:13:20 LOG5 log_alfabeam: Parameters: 12.474499999999999 7.3974444444444458 13.268837 2008.32845336781 -21.500038 2008-Apr-28 23:13:20 LOG4 log_alfabeam: ALFABEAM 0 12.474499999999997 7.397444444444447 2008-Apr-28 23:13:20 LOG4 log_alfabeam: ALFABEAM 1 12.474291774728279 7.494892327264085 2008-Apr-28 23:13:20 LOG4 log_alfabeam: ALFABEAM 2 12.468604257589311 7.430423496854258 2008-Apr-28 23:13:20 LOG4 log_alfabeam: ALFABEAM 3 12.468830142415429 7.332645303722349 2008-Apr-28 23:13:20 LOG4 log_alfabeam: ALFABEAM 4 12.474750642486704 7.299805361716421 2008-Apr-28 23:13:20 LOG4 log_alfabeam: ALFABEAM 5 12.480396656102412 7.365048966550517 2008-Apr-28 23:13:20 LOG4 log_alfabeam: ALFABEAM 6 12.480163776777609 7.462359068109912 2008-Apr-28 23:13:20 INFO2 take_spectra: Starting WAPP scan: 811900123 2008-Apr-28 23:13:21 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-28 23:13:21 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-28 23:13:21 LOG5 begin_task: Level: (5) ID = <10510> Status = 0 0 0 0 ok 2008-Apr-28 23:13:21 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-28 23:13:21 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11602.00 2008-Apr-28 23:13:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.166987 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-28 23:13:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.166987 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 23:13:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.166987 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 23:13:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.166987 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 23:13:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.166987 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 23:13:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.166987 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-28 23:13:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.166987 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-28 23:13:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.166987 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-28 23:13:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.166987 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-28 23:13:27 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-28 23:13:27 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-28 23:13:27 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-28 23:13:27 LOG5 end_task: Level: (5) ID = <10510> Status = 0 0 0 0 ok 2008-Apr-28 23:13:27 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-28 23:13:27 LOG5 end_task: Level: (4) ID = <10509> Status = 0 0 0 0 ok 2008-Apr-28 23:13:27 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-28 23:13:27 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-28 23:13:27 LOG5 finish_task: Level: (3) ID = <10500> Status = 0 0 0 0 ok 2008-Apr-28 23:13:27 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-28 23:13:27 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 23:13:27 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-28 23:13:27 LOG5 end_task: Level: (3) ID = <10500> Status = 0 0 0 0 ok 2008-Apr-28 23:13:27 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-28 23:13:27 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 47.62 and ZA = 15.87 2008-Apr-28 23:13:27 LOG3 track_source: Calling 'track_source AGESVC1B_p1_065 47.62 15.8685331561 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-28 23:13:27 START begin_task: Starting task 'sending tracking commands' 2008-Apr-28 23:13:27 LOG5 begin_task: Level: (3) ID = <10511> Status = 0 0 0 0 ok 2008-Apr-28 23:13:27 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p1_065} INFO {Slewing to source 'AGESVC1B_p1_065' ...} 2008-Apr-28 23:13:27 INFO1 track_source: Starting to track AGESVC1B_p1_065 2008-Apr-28 23:13:27 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p1_065" 2008-Apr-28 23:13:27 LOG3 vw_send: To DATATAKING: set ra 47.62 2008-Apr-28 23:13:27 LOG3 vw_send: To DATATAKING: set dec 15.8685331561 2008-Apr-28 23:13:27 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-28 23:13:27 LOG3 vw_send: To DATATAKING: pnt tr 47.62 15.8685331561 -CF 2008-Apr-28 23:13:27 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-28 23:13:27 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-28 23:13:27 LOG5 finish_task: Level: (3) ID = <10511> Status = 0 0 0 0 ok 2008-Apr-28 23:13:27 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-28 23:13:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-28 23:13:28 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-28 23:13:28 LOG5 end_task: Level: (3) ID = <10511> Status = 0 0 0 0 ok 2008-Apr-28 23:13:28 LOG1 fixed_driftmap: Parameters: HA = +00:47:00.2 Start = 13:16:27.3 LST = 13:16:14.8 diff = 12.5 secs 2008-Apr-28 23:13:28 INFO2 fixed_driftmap: Waiting 10.5 seconds for RA 12:29:27 2008-Apr-28 23:13:28 INFO2 lstwait: Waiting for 10.4 secs from LST 13:16:15 to LST 13:16:25 ... 2008-Apr-28 23:13:28 LOG4 send_obs_status: To obs_status: <1> TASKTIME 10.42477410643354 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-28 23:13:28 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-28 23:13:28 LOG5 begin_task: Level: (3) ID = <10512> Status = 0 0 0 0 ok 2008-Apr-28 23:13:28 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p1_065" 2008-Apr-28 23:13:28 INFO5 check_wapp_levels: WAPP power levels are between 0.909 and 1.507 (still bad) 2008-Apr-28 23:13:28 LOG4 got_cormsg: From DATATAKING: set ra 47.62 2008-Apr-28 23:13:28 LOG4 got_cormsg: From DATATAKING: set dec 15.8685331561 2008-Apr-28 23:13:28 LOG4 got_cormsg: From DATATAKING: vw% 47.62 2008-Apr-28 23:13:28 LOG4 got_cormsg: From DATATAKING: vw% 15.8685331561 2008-Apr-28 23:13:28 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 23:13:28 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-28 23:13:28 LOG4 got_cormsg: From DATATAKING: pnt tr 47.62 15.8685331561 -CF 2008-Apr-28 23:13:28 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-28 23:13:28 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-28 23:13:28 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 23:13:38 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-28 23:13:38 LOG5 end_task: Level: (3) ID = <10512> Status = 0 0 0 0 ok 2008-Apr-28 23:13:38 LOG4 lstwait: Finished waiting, the gui caused difference: 0.57708415999755402 2008-Apr-28 23:13:38 INFO3 lstwait: Finished waiting 2008-Apr-28 23:13:38 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-28 23:13:38 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-28 23:13:38 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-28 23:13:38 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-28 23:13:38 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-28 23:13:38 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-28 23:13:38 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-28 23:13:38 LOG5 begin_task: Level: (3) ID = <10513> Status = 0 0 0 0 ok 2008-Apr-28 23:13:38 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-28 23:13:38 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-28 23:13:38 INFO2 take_spectra: Starting WAPP scan: 811900124 2008-Apr-28 23:13:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-28 23:13:39 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-28 23:13:39 LOG5 begin_task: Level: (4) ID = <10514> Status = 0 0 0 0 ok 2008-Apr-28 23:13:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-28 23:13:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11620.00 2008-Apr-28 23:13:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.166987 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-28 23:13:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.166987 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 23:13:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.166987 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 23:13:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.166987 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 23:13:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.166987 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-28 23:13:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.166987 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-28 23:13:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.166987 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-28 23:13:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.166987 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-28 23:13:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.166987 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-28 23:13:41 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.909 and 1.122 2008-Apr-28 23:13:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.716 < 0.8)! 2008-Apr-28 23:13:59 LOG4 check_wapp_levels: WAPP-1 power levels: 0.952 0.716 0.930 0.904 2008-Apr-28 23:13:59 LOG4 check_wapp_levels: WAPP-2 power levels: 0.852 0.989 1.065 1.118 2008-Apr-28 23:13:59 LOG4 check_wapp_levels: WAPP-3 power levels: 0.982 1.015 1.089 0.937 2008-Apr-28 23:13:59 LOG4 check_wapp_levels: WAPP-4 power levels: 1.105 1.094 0.963 0.974 2008-Apr-28 23:14:01 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.852 and 1.118 2008-Apr-28 23:14:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.665 < 0.8)! 2008-Apr-28 23:14:39 LOG4 check_wapp_levels: WAPP-1 power levels: 0.949 0.665 0.928 0.906 2008-Apr-28 23:14:39 LOG4 check_wapp_levels: WAPP-2 power levels: 0.851 0.988 1.065 1.117 2008-Apr-28 23:14:39 LOG4 check_wapp_levels: WAPP-3 power levels: 0.986 1.019 1.087 0.937 2008-Apr-28 23:14:39 LOG4 check_wapp_levels: WAPP-4 power levels: 1.106 1.093 0.965 0.973 2008-Apr-28 23:14:41 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.850 and 1.118 2008-Apr-28 23:14:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.700 < 0.8)! 2008-Apr-28 23:14:52 LOG4 check_wapp_levels: WAPP-1 power levels: 0.949 0.700 0.928 0.903 2008-Apr-28 23:14:52 LOG4 check_wapp_levels: WAPP-2 power levels: 0.849 0.987 1.067 1.119 2008-Apr-28 23:14:52 LOG4 check_wapp_levels: WAPP-3 power levels: 0.984 1.017 1.091 0.939 2008-Apr-28 23:14:52 LOG4 check_wapp_levels: WAPP-4 power levels: 1.107 1.095 0.965 0.973 2008-Apr-28 23:14:54 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.812 and 1.120 2008-Apr-28 23:15:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.708 < 0.8)! 2008-Apr-28 23:15:10 LOG4 check_wapp_levels: WAPP-1 power levels: 0.950 0.708 0.918 0.902 2008-Apr-28 23:15:10 LOG4 check_wapp_levels: WAPP-2 power levels: 0.852 0.988 1.069 1.119 2008-Apr-28 23:15:10 LOG4 check_wapp_levels: WAPP-3 power levels: 0.983 1.017 1.089 0.939 2008-Apr-28 23:15:10 LOG4 check_wapp_levels: WAPP-4 power levels: 1.106 1.094 0.964 0.972 2008-Apr-28 23:15:12 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.851 and 1.119 2008-Apr-28 23:15:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.774 < 0.8)! 2008-Apr-28 23:15:14 LOG4 check_wapp_levels: WAPP-1 power levels: 0.949 0.774 0.925 0.905 2008-Apr-28 23:15:14 LOG4 check_wapp_levels: WAPP-2 power levels: 0.851 0.989 1.067 1.118 2008-Apr-28 23:15:14 LOG4 check_wapp_levels: WAPP-3 power levels: 0.984 1.017 1.088 0.939 2008-Apr-28 23:15:14 LOG4 check_wapp_levels: WAPP-4 power levels: 1.106 1.093 0.964 0.971 2008-Apr-28 23:15:16 INFO5 check_wapp_levels: WAPP power levels are between 0.769 and 1.118 (still bad) 2008-Apr-28 23:15:18 INFO5 check_wapp_levels: WAPP power levels are between 0.768 and 1.119 (still bad) 2008-Apr-28 23:15:20 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.851 and 1.118 2008-Apr-28 23:17:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.589 < 0.8)! 2008-Apr-28 23:17:54 LOG4 check_wapp_levels: WAPP-1 power levels: 0.950 0.589 0.918 0.892 2008-Apr-28 23:17:54 LOG4 check_wapp_levels: WAPP-2 power levels: 0.851 0.988 1.064 1.118 2008-Apr-28 23:17:54 LOG4 check_wapp_levels: WAPP-3 power levels: 0.989 1.021 1.088 0.940 2008-Apr-28 23:17:54 LOG4 check_wapp_levels: WAPP-4 power levels: 1.113 1.091 0.966 0.972 2008-Apr-28 23:17:56 INFO5 check_wapp_levels: WAPP power levels are between 0.623 and 1.118 (still bad) 2008-Apr-28 23:17:58 INFO5 check_wapp_levels: WAPP power levels are between 0.568 and 1.118 (still bad) 2008-Apr-28 23:18:00 INFO5 check_wapp_levels: WAPP power levels are between 0.570 and 1.117 (still bad) 2008-Apr-28 23:18:02 INFO5 check_wapp_levels: WAPP power levels are between 0.728 and 1.118 (still bad) 2008-Apr-28 23:18:04 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.849 and 1.117 2008-Apr-28 23:19:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.666 < 0.8)! 2008-Apr-28 23:19:09 LOG4 check_wapp_levels: WAPP-1 power levels: 0.951 0.666 0.930 0.901 2008-Apr-28 23:19:09 LOG4 check_wapp_levels: WAPP-2 power levels: 0.850 0.989 1.065 1.118 2008-Apr-28 23:19:09 LOG4 check_wapp_levels: WAPP-3 power levels: 0.988 1.018 1.091 0.941 2008-Apr-28 23:19:09 LOG4 check_wapp_levels: WAPP-4 power levels: 1.109 1.093 0.968 0.974 2008-Apr-28 23:19:11 INFO5 check_wapp_levels: WAPP power levels are between 0.722 and 1.118 (still bad) 2008-Apr-28 23:19:13 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.850 and 1.118 2008-Apr-28 23:19:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.696 < 0.8)! 2008-Apr-28 23:19:15 LOG4 check_wapp_levels: WAPP-1 power levels: 0.954 0.696 0.930 0.903 2008-Apr-28 23:19:15 LOG4 check_wapp_levels: WAPP-2 power levels: 0.848 0.987 1.065 1.118 2008-Apr-28 23:19:15 LOG4 check_wapp_levels: WAPP-3 power levels: 0.989 1.018 1.091 0.941 2008-Apr-28 23:19:15 LOG4 check_wapp_levels: WAPP-4 power levels: 1.109 1.095 0.967 0.974 2008-Apr-28 23:19:17 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.848 and 1.119 2008-Apr-28 23:19:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.648 < 0.8)! 2008-Apr-28 23:19:21 LOG4 check_wapp_levels: WAPP-1 power levels: 0.953 0.648 0.928 0.902 2008-Apr-28 23:19:21 LOG4 check_wapp_levels: WAPP-2 power levels: 0.849 0.989 1.064 1.119 2008-Apr-28 23:19:21 LOG4 check_wapp_levels: WAPP-3 power levels: 0.988 1.018 1.089 0.940 2008-Apr-28 23:19:21 LOG4 check_wapp_levels: WAPP-4 power levels: 1.109 1.094 0.968 0.974 2008-Apr-28 23:19:23 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.851 and 1.118 2008-Apr-28 23:19:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.761 < 0.8)! 2008-Apr-28 23:19:29 LOG4 check_wapp_levels: WAPP-1 power levels: 0.952 0.761 0.928 0.902 2008-Apr-28 23:19:29 LOG4 check_wapp_levels: WAPP-2 power levels: 0.850 0.988 1.066 1.118 2008-Apr-28 23:19:29 LOG4 check_wapp_levels: WAPP-3 power levels: 0.986 1.017 1.090 0.940 2008-Apr-28 23:19:29 LOG4 check_wapp_levels: WAPP-4 power levels: 1.108 1.093 0.965 0.974 2008-Apr-28 23:19:31 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.848 and 1.118 2008-Apr-28 23:19:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.715 < 0.8)! 2008-Apr-28 23:19:37 LOG4 check_wapp_levels: WAPP-1 power levels: 0.953 0.715 0.929 0.901 2008-Apr-28 23:19:37 LOG4 check_wapp_levels: WAPP-2 power levels: 0.849 0.988 1.065 1.118 2008-Apr-28 23:19:37 LOG4 check_wapp_levels: WAPP-3 power levels: 0.987 1.015 1.091 0.939 2008-Apr-28 23:19:37 LOG4 check_wapp_levels: WAPP-4 power levels: 1.110 1.092 0.966 0.973 2008-Apr-28 23:19:39 INFO5 check_wapp_levels: WAPP power levels are between 0.727 and 1.118 (still bad) 2008-Apr-28 23:19:41 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.851 and 1.118 2008-Apr-28 23:19:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.669 < 0.8)! 2008-Apr-28 23:19:43 LOG4 check_wapp_levels: WAPP-1 power levels: 0.952 0.669 0.926 0.902 2008-Apr-28 23:19:43 LOG4 check_wapp_levels: WAPP-2 power levels: 0.850 0.989 1.065 1.118 2008-Apr-28 23:19:43 LOG4 check_wapp_levels: WAPP-3 power levels: 0.985 1.015 1.089 0.941 2008-Apr-28 23:19:43 LOG4 check_wapp_levels: WAPP-4 power levels: 1.110 1.094 0.966 0.974 2008-Apr-28 23:19:45 INFO5 check_wapp_levels: WAPP power levels are between 0.740 and 1.118 (still bad) 2008-Apr-28 23:19:47 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.850 and 1.118 2008-Apr-28 23:19:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.752 < 0.8)! 2008-Apr-28 23:19:57 LOG4 check_wapp_levels: WAPP-1 power levels: 0.954 0.752 0.931 0.903 2008-Apr-28 23:19:57 LOG4 check_wapp_levels: WAPP-2 power levels: 0.851 0.989 1.065 1.118 2008-Apr-28 23:19:57 LOG4 check_wapp_levels: WAPP-3 power levels: 0.984 1.013 1.094 0.941 2008-Apr-28 23:19:57 LOG4 check_wapp_levels: WAPP-4 power levels: 1.109 1.095 0.967 0.974 2008-Apr-28 23:19:59 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.848 and 1.117 2008-Apr-28 23:20:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.772 < 0.8)! 2008-Apr-28 23:20:52 LOG4 check_wapp_levels: WAPP-1 power levels: 0.953 0.772 0.924 0.900 2008-Apr-28 23:20:52 LOG4 check_wapp_levels: WAPP-2 power levels: 0.858 0.995 1.079 1.133 2008-Apr-28 23:20:52 LOG4 check_wapp_levels: WAPP-3 power levels: 0.981 1.013 1.089 0.938 2008-Apr-28 23:20:52 LOG4 check_wapp_levels: WAPP-4 power levels: 1.108 1.092 0.965 0.972 2008-Apr-28 23:20:54 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.858 and 1.131 2008-Apr-28 23:20:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.773 < 0.8)! 2008-Apr-28 23:20:56 LOG4 check_wapp_levels: WAPP-1 power levels: 0.951 0.773 0.920 0.898 2008-Apr-28 23:20:56 LOG4 check_wapp_levels: WAPP-2 power levels: 0.863 1.002 1.073 1.125 2008-Apr-28 23:20:56 LOG4 check_wapp_levels: WAPP-3 power levels: 0.981 1.014 1.085 0.937 2008-Apr-28 23:20:56 LOG4 check_wapp_levels: WAPP-4 power levels: 1.107 1.094 0.965 0.973 2008-Apr-28 23:20:58 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.866 and 1.123 2008-Apr-28 23:22:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.647 < 0.8)! 2008-Apr-28 23:22:19 LOG4 check_wapp_levels: WAPP-1 power levels: 0.949 0.647 0.911 0.890 2008-Apr-28 23:22:19 LOG4 check_wapp_levels: WAPP-2 power levels: 0.851 0.987 1.064 1.118 2008-Apr-28 23:22:19 LOG4 check_wapp_levels: WAPP-3 power levels: 0.982 1.013 1.160 1.002 2008-Apr-28 23:22:19 LOG4 check_wapp_levels: WAPP-4 power levels: 1.121 1.105 0.975 0.984 2008-Apr-28 23:22:21 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.849 and 1.156 2008-Apr-28 23:22:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.688 < 0.8)! 2008-Apr-28 23:22:25 LOG4 check_wapp_levels: WAPP-1 power levels: 0.950 0.688 0.917 0.891 2008-Apr-28 23:22:25 LOG4 check_wapp_levels: WAPP-2 power levels: 0.851 0.987 1.064 1.118 2008-Apr-28 23:22:25 LOG4 check_wapp_levels: WAPP-3 power levels: 0.985 1.016 1.138 0.985 2008-Apr-28 23:22:25 LOG4 check_wapp_levels: WAPP-4 power levels: 1.113 1.097 0.969 0.977 2008-Apr-28 23:22:27 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.849 and 1.123 2008-Apr-28 23:22:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.656 < 0.8)! 2008-Apr-28 23:22:29 LOG4 check_wapp_levels: WAPP-1 power levels: 0.951 0.656 0.920 0.895 2008-Apr-28 23:22:29 LOG4 check_wapp_levels: WAPP-2 power levels: 0.850 0.987 1.066 1.118 2008-Apr-28 23:22:29 LOG4 check_wapp_levels: WAPP-3 power levels: 0.985 1.017 1.110 0.961 2008-Apr-28 23:22:29 LOG4 check_wapp_levels: WAPP-4 power levels: 1.110 1.095 0.967 0.975 2008-Apr-28 23:22:31 INFO5 check_wapp_levels: WAPP power levels are between 0.743 and 1.119 (still bad) 2008-Apr-28 23:22:33 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.849 and 1.119 2008-Apr-28 23:22:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.789 < 0.8)! 2008-Apr-28 23:22:35 LOG4 check_wapp_levels: WAPP-1 power levels: 0.995 0.789 0.929 0.900 2008-Apr-28 23:22:35 LOG4 check_wapp_levels: WAPP-2 power levels: 0.849 0.987 1.066 1.120 2008-Apr-28 23:22:35 LOG4 check_wapp_levels: WAPP-3 power levels: 0.984 1.016 1.086 0.939 2008-Apr-28 23:22:35 LOG4 check_wapp_levels: WAPP-4 power levels: 1.111 1.094 0.967 0.975 2008-Apr-28 23:22:37 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.850 and 1.122 2008-Apr-28 23:23:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.795 < 0.8)! 2008-Apr-28 23:23:30 LOG4 check_wapp_levels: WAPP-1 power levels: 0.946 0.795 0.925 0.902 2008-Apr-28 23:23:30 LOG4 check_wapp_levels: WAPP-2 power levels: 0.853 0.993 1.065 1.119 2008-Apr-28 23:23:30 LOG4 check_wapp_levels: WAPP-3 power levels: 0.988 1.017 1.089 0.941 2008-Apr-28 23:23:30 LOG4 check_wapp_levels: WAPP-4 power levels: 1.123 1.106 0.976 0.984 2008-Apr-28 23:23:32 INFO5 check_wapp_levels: WAPP power levels are between 0.712 and 1.124 (still bad) 2008-Apr-28 23:23:34 INFO5 check_wapp_levels: WAPP power levels are between 0.696 and 1.130 (still bad) 2008-Apr-28 23:23:36 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.850 and 1.139 2008-Apr-28 23:24:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.747 < 0.8)! 2008-Apr-28 23:24:20 LOG4 check_wapp_levels: WAPP-1 power levels: 0.952 0.747 0.929 0.903 2008-Apr-28 23:24:20 LOG4 check_wapp_levels: WAPP-2 power levels: 0.848 0.988 1.066 1.118 2008-Apr-28 23:24:20 LOG4 check_wapp_levels: WAPP-3 power levels: 0.989 1.019 1.090 0.941 2008-Apr-28 23:24:20 LOG4 check_wapp_levels: WAPP-4 power levels: 1.113 1.095 0.969 0.975 2008-Apr-28 23:24:22 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.848 and 1.118 2008-Apr-28 23:26:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.703 < 0.8)! 2008-Apr-28 23:26:44 LOG4 check_wapp_levels: WAPP-1 power levels: 0.948 0.703 0.920 0.901 2008-Apr-28 23:26:44 LOG4 check_wapp_levels: WAPP-2 power levels: 0.848 0.987 1.070 1.121 2008-Apr-28 23:26:44 LOG4 check_wapp_levels: WAPP-3 power levels: 0.980 1.011 1.089 0.939 2008-Apr-28 23:26:44 LOG4 check_wapp_levels: WAPP-4 power levels: 1.106 1.091 0.965 0.970 2008-Apr-28 23:26:46 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.821 and 1.121 2008-Apr-28 23:27:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.747 < 0.8)! 2008-Apr-28 23:27:47 LOG4 check_wapp_levels: WAPP-1 power levels: 0.946 0.747 0.922 0.896 2008-Apr-28 23:27:47 LOG4 check_wapp_levels: WAPP-2 power levels: 0.846 0.987 1.067 1.118 2008-Apr-28 23:27:47 LOG4 check_wapp_levels: WAPP-3 power levels: 0.982 1.012 1.090 0.938 2008-Apr-28 23:27:47 LOG4 check_wapp_levels: WAPP-4 power levels: 1.108 1.094 0.964 0.974 2008-Apr-28 23:27:49 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.848 and 1.118 2008-Apr-28 23:27:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.623 < 0.8)! 2008-Apr-28 23:27:57 LOG4 check_wapp_levels: WAPP-1 power levels: 0.946 0.623 0.923 0.897 2008-Apr-28 23:27:57 LOG4 check_wapp_levels: WAPP-2 power levels: 0.848 0.988 1.066 1.118 2008-Apr-28 23:27:57 LOG4 check_wapp_levels: WAPP-3 power levels: 0.984 1.014 1.090 0.939 2008-Apr-28 23:27:57 LOG4 check_wapp_levels: WAPP-4 power levels: 1.110 1.094 0.966 0.972 2008-Apr-28 23:27:59 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.847 and 1.117 2008-Apr-28 23:29:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.764 < 0.8)! 2008-Apr-28 23:29:08 LOG4 check_wapp_levels: WAPP-1 power levels: 0.948 0.764 0.919 0.897 2008-Apr-28 23:29:08 LOG4 check_wapp_levels: WAPP-2 power levels: 0.849 0.987 1.069 1.120 2008-Apr-28 23:29:08 LOG4 check_wapp_levels: WAPP-3 power levels: 0.996 1.027 1.088 0.941 2008-Apr-28 23:29:08 LOG4 check_wapp_levels: WAPP-4 power levels: 1.114 1.091 0.969 0.971 2008-Apr-28 23:29:10 INFO5 check_wapp_levels: WAPP power levels are between 0.764 and 1.119 (still bad) 2008-Apr-28 23:29:12 INFO5 check_wapp_levels: WAPP power levels are between 0.766 and 1.118 (still bad) 2008-Apr-28 23:29:14 INFO5 check_wapp_levels: WAPP power levels are between 0.764 and 1.118 (still bad) 2008-Apr-28 23:29:16 INFO5 check_wapp_levels: WAPP power levels are between 0.763 and 1.117 (still bad) 2008-Apr-28 23:29:18 INFO5 check_wapp_levels: WAPP power levels are between 0.762 and 1.117 (still bad) 2008-Apr-28 23:29:20 INFO5 check_wapp_levels: WAPP power levels are between 0.763 and 1.119 (still bad) 2008-Apr-28 23:29:22 INFO5 check_wapp_levels: WAPP power levels are between 0.762 and 1.119 (still bad) 2008-Apr-28 23:29:24 INFO5 check_wapp_levels: WAPP power levels are between 0.762 and 1.119 (still bad) 2008-Apr-28 23:29:26 INFO5 check_wapp_levels: WAPP power levels are between 0.762 and 1.121 (still bad) 2008-Apr-28 23:29:28 INFO5 check_wapp_levels: WAPP power levels are between 0.764 and 1.122 (still bad) 2008-Apr-28 23:29:30 INFO5 check_wapp_levels: WAPP power levels are between 0.765 and 1.122 (still bad) 2008-Apr-28 23:29:32 INFO5 check_wapp_levels: WAPP power levels are between 0.764 and 1.122 (still bad) 2008-Apr-28 23:29:34 INFO5 check_wapp_levels: WAPP power levels are between 0.764 and 1.122 (still bad) 2008-Apr-28 23:29:36 INFO5 check_wapp_levels: WAPP power levels are between 0.763 and 1.120 (still bad) 2008-Apr-28 23:29:38 INFO5 check_wapp_levels: WAPP power levels are between 0.765 and 1.120 (still bad) 2008-Apr-28 23:29:40 INFO5 check_wapp_levels: WAPP power levels are between 0.764 and 1.119 (still bad) 2008-Apr-28 23:29:42 INFO5 check_wapp_levels: WAPP power levels are between 0.765 and 1.118 (still bad) 2008-Apr-28 23:29:44 INFO5 check_wapp_levels: WAPP power levels are between 0.766 and 1.119 (still bad) 2008-Apr-28 23:29:46 INFO5 check_wapp_levels: WAPP power levels are between 0.765 and 1.120 (still bad) 2008-Apr-28 23:29:48 INFO5 check_wapp_levels: WAPP power levels are between 0.766 and 1.119 (still bad) 2008-Apr-28 23:29:50 INFO5 check_wapp_levels: WAPP power levels are between 0.766 and 1.119 (still bad) 2008-Apr-28 23:29:52 INFO5 check_wapp_levels: WAPP power levels are between 0.765 and 1.119 (still bad) 2008-Apr-28 23:29:54 INFO5 check_wapp_levels: WAPP power levels are between 0.764 and 1.119 (still bad) 2008-Apr-28 23:29:56 INFO5 check_wapp_levels: WAPP power levels are between 0.766 and 1.118 (still bad) 2008-Apr-28 23:29:58 INFO5 check_wapp_levels: WAPP power levels are between 0.765 and 1.118 (still bad) 2008-Apr-28 23:30:00 INFO5 check_wapp_levels: WAPP power levels are between 0.765 and 1.118 (still bad) 2008-Apr-28 23:30:02 INFO5 check_wapp_levels: WAPP power levels are between 0.766 and 1.120 (still bad) 2008-Apr-28 23:30:04 INFO5 check_wapp_levels: WAPP power levels are between 0.766 and 1.118 (still bad) 2008-Apr-28 23:30:06 INFO5 check_wapp_levels: WAPP power levels are between 0.765 and 1.119 (still bad) 2008-Apr-28 23:30:08 INFO5 check_wapp_levels: WAPP power levels are between 0.766 and 1.124 (still bad) 2008-Apr-28 23:30:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.768 < 0.8)! 2008-Apr-28 23:30:10 LOG4 check_wapp_levels: WAPP-1 power levels: 0.944 0.768 0.910 0.888 2008-Apr-28 23:30:10 LOG4 check_wapp_levels: WAPP-2 power levels: 0.850 0.989 1.065 1.118 2008-Apr-28 23:30:10 LOG4 check_wapp_levels: WAPP-3 power levels: 0.985 1.018 1.126 0.975 2008-Apr-28 23:30:10 LOG4 check_wapp_levels: WAPP-4 power levels: 1.110 1.091 0.966 0.971 2008-Apr-28 23:30:12 INFO5 check_wapp_levels: WAPP power levels are between 0.770 and 1.127 (still bad) 2008-Apr-28 23:30:14 INFO5 check_wapp_levels: WAPP power levels are between 0.769 and 1.120 (still bad) 2008-Apr-28 23:30:16 INFO5 check_wapp_levels: WAPP power levels are between 0.775 and 1.118 (still bad) 2008-Apr-28 23:30:18 INFO5 check_wapp_levels: WAPP power levels are between 0.767 and 1.117 (still bad) 2008-Apr-28 23:30:20 INFO5 check_wapp_levels: WAPP power levels are between 0.768 and 1.117 (still bad) 2008-Apr-28 23:30:22 INFO5 check_wapp_levels: WAPP power levels are between 0.770 and 1.117 (still bad) 2008-Apr-28 23:30:25 INFO5 check_wapp_levels: WAPP power levels are between 0.772 and 1.119 (still bad) 2008-Apr-28 23:30:27 INFO5 check_wapp_levels: WAPP power levels are between 0.771 and 1.119 (still bad) 2008-Apr-28 23:30:29 INFO5 check_wapp_levels: WAPP power levels are between 0.773 and 1.118 (still bad) 2008-Apr-28 23:30:31 INFO5 check_wapp_levels: WAPP power levels are between 0.777 and 1.119 (still bad) 2008-Apr-28 23:30:33 INFO5 check_wapp_levels: WAPP power levels are between 0.774 and 1.119 (still bad) 2008-Apr-28 23:30:35 INFO5 check_wapp_levels: WAPP power levels are between 0.773 and 1.119 (still bad) 2008-Apr-28 23:30:37 INFO5 check_wapp_levels: WAPP power levels are between 0.774 and 1.121 (still bad) 2008-Apr-28 23:30:39 INFO5 check_wapp_levels: WAPP power levels are between 0.776 and 1.123 (still bad) 2008-Apr-28 23:30:41 INFO5 check_wapp_levels: WAPP power levels are between 0.773 and 1.129 (still bad) 2008-Apr-28 23:30:43 INFO5 check_wapp_levels: WAPP power levels are between 0.775 and 1.136 (still bad) 2008-Apr-28 23:30:45 INFO5 check_wapp_levels: WAPP power levels are between 0.774 and 1.145 (still bad) 2008-Apr-28 23:30:47 INFO5 check_wapp_levels: WAPP power levels are between 0.771 and 1.149 (still bad) 2008-Apr-28 23:30:49 INFO5 check_wapp_levels: WAPP power levels are between 0.770 and 1.152 (still bad) 2008-Apr-28 23:30:51 INFO5 check_wapp_levels: WAPP power levels are between 0.771 and 1.151 (still bad) 2008-Apr-28 23:30:53 INFO5 check_wapp_levels: WAPP power levels are between 0.772 and 1.146 (still bad) 2008-Apr-28 23:30:55 INFO5 check_wapp_levels: WAPP power levels are between 0.708 and 1.138 (still bad) 2008-Apr-28 23:30:57 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.802 and 1.130 2008-Apr-28 23:31:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.721 < 0.8)! 2008-Apr-28 23:31:54 LOG4 check_wapp_levels: WAPP-1 power levels: 0.948 0.721 0.925 0.897 2008-Apr-28 23:31:54 LOG4 check_wapp_levels: WAPP-2 power levels: 0.852 0.992 1.068 1.120 2008-Apr-28 23:31:54 LOG4 check_wapp_levels: WAPP-3 power levels: 0.981 1.015 1.088 0.940 2008-Apr-28 23:31:54 LOG4 check_wapp_levels: WAPP-4 power levels: 1.109 1.093 0.967 0.971 2008-Apr-28 23:31:56 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.851 and 1.120 2008-Apr-28 23:32:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.659 < 0.8)! 2008-Apr-28 23:32:18 LOG4 check_wapp_levels: WAPP-1 power levels: 0.949 0.659 0.929 0.901 2008-Apr-28 23:32:18 LOG4 check_wapp_levels: WAPP-2 power levels: 0.849 0.987 1.067 1.119 2008-Apr-28 23:32:18 LOG4 check_wapp_levels: WAPP-3 power levels: 0.984 1.018 1.091 0.941 2008-Apr-28 23:32:18 LOG4 check_wapp_levels: WAPP-4 power levels: 1.107 1.095 0.965 0.973 2008-Apr-28 23:32:20 INFO5 check_wapp_levels: WAPP power levels are between 0.728 and 1.119 (still bad) 2008-Apr-28 23:32:22 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.848 and 1.119 2008-Apr-28 23:33:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.777 < 0.8)! 2008-Apr-28 23:33:16 LOG4 check_wapp_levels: WAPP-1 power levels: 0.949 0.777 0.921 0.896 2008-Apr-28 23:33:16 LOG4 check_wapp_levels: WAPP-2 power levels: 0.851 0.989 1.068 1.120 2008-Apr-28 23:33:16 LOG4 check_wapp_levels: WAPP-3 power levels: 0.982 1.017 1.091 0.942 2008-Apr-28 23:33:16 LOG4 check_wapp_levels: WAPP-4 power levels: 1.109 1.094 0.966 0.974 2008-Apr-28 23:33:18 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.852 and 1.120 2008-Apr-28 23:33:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.766 < 0.8)! 2008-Apr-28 23:33:23 LOG4 check_wapp_levels: WAPP-1 power levels: 0.952 0.766 0.924 0.897 2008-Apr-28 23:33:23 LOG4 check_wapp_levels: WAPP-2 power levels: 0.850 0.990 1.070 1.120 2008-Apr-28 23:33:23 LOG4 check_wapp_levels: WAPP-3 power levels: 0.985 1.017 1.093 0.942 2008-Apr-28 23:33:23 LOG4 check_wapp_levels: WAPP-4 power levels: 1.109 1.095 0.967 0.973 2008-Apr-28 23:33:25 INFO5 check_wapp_levels: WAPP power levels are between 0.662 and 1.120 (still bad) 2008-Apr-28 23:33:27 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.816 and 1.121 2008-Apr-28 23:33:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-28 23:33:40 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-28 23:33:40 LOG5 end_task: Level: (4) ID = <10514> Status = 0 0 0 0 ok 2008-Apr-28 23:33:40 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-28 23:33:40 LOG5 end_task: Level: (3) ID = <10513> Status = 0 0 0 0 ok 2008-Apr-28 23:33:40 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-28 23:33:40 LOG5 finish_task: Level: (2) ID = <10481> Status = 0 0 0 0 ok 2008-Apr-28 23:33:40 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-28 23:33:40 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-28 23:33:40 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-28 23:33:40 LOG5 end_task: Level: (2) ID = <10481> Status = 0 0 0 0 ok 2008-Apr-28 23:33:40 NOTE run_command_file: DONE with command file processing 2008-Apr-28 23:33:40 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2008-Apr-28 23:33:40 STOP finish_task: Finishing task 'running command file '080428_obs.cmd'' 2008-Apr-28 23:33:40 LOG5 finish_task: Level: (1) ID = <10090> Status = 0 0 0 0 ok 2008-Apr-28 23:33:40 DONE finish_task: DONE finished running: command file '080428_obs.cmd' 2008-Apr-28 23:33:40 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-28 23:33:40 END end_task: Finishing task 'running command file '080428_obs.cmd'' with status 'OK' 2008-Apr-28 23:33:40 LOG5 end_task: Level: (1) ID = <10090> Status = 0 0 0 0 ok 2008-Apr-28 23:35:56 ALERT CIMA-exit_cima: Exiting CIMA ... 2008-Apr-28 23:35:56 COMMAND CIMA-send_to_exec: Sending command to move interim correlator data 2008-Apr-28 23:35:56 LOG4 exec_msg: From OBSERVER: vw_send {mvdata a2048} 2008-Apr-28 23:35:56 LOG3 vw_send: To DATATAKING: mvdata a2048 2008-Apr-28 23:35:56 COMMAND CIMA-send_to_exec: Sending command to clear telescope offsets 2008-Apr-28 23:35:56 LOG4 exec_msg: From OBSERVER: vw_send {pnt c setoff 0 0} 2008-Apr-28 23:35:56 LOG3 vw_send: To DATATAKING: pnt c setoff 0 0 2008-Apr-28 23:35:56 NOTE CIMA-exit_cima: Cleaning up session ... 2008-Apr-28 23:35:56 LOG4 got_cormsg: From DATATAKING: mvdata a2048 2008-Apr-28 23:35:56 LOG4 got_cormsg: From DATATAKING: pnt c setoff 0 0 2008-Apr-28 23:35:57 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 23:35:57 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-28 23:35:58 LOG3 exec_msg: Closing socket