2008-Apr-27 18:23:39 BEGIN executive: CIMA executive starting ... 2008-Apr-27 18:23:39 NOTE executive: STARTING NEW CIMA SESSION 2008-Apr-27 18:23:39 INFO1 executive: Using CIMA version 2.3.xx 'unusable' from 2008-04-26 12:28 2008-Apr-27 18:23:39 INFO4 executive: This is an ON-LINE session 2008-Apr-27 18:23:39 INFO4 executive: This is a REMOTE session 2008-Apr-27 18:23:39 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2008-Apr-27 18:23:39 INFO1 executive: CIMA session for project 'a2048' in 'line' mode for 'Steve Schnei' 2008-Apr-27 18:23:39 INFO2 executive: Logging to '/share/obs4/usr/a2048/a2048.cimalog_20080427' 2008-Apr-27 18:23:40 LOG2 log_preferences: Currently applied preferences: 2008-Apr-27 18:23:40 LOG2 log_preferences: prefs(dailylog) = daily 2008-Apr-27 18:23:40 LOG2 log_preferences: prefs(offlinelog) = skip 2008-Apr-27 18:23:40 LOG2 log_preferences: prefs(datawindow) = ignore 2008-Apr-27 18:23:40 LOG2 log_preferences: prefs(limitwarning) = enabled 2008-Apr-27 18:23:40 LOG2 log_preferences: prefs(wappfailure) = abort 2008-Apr-27 18:23:40 LOG2 log_preferences: prefs(helpstyle) = stay-open 2008-Apr-27 18:23:40 LOG2 log_preferences: prefs(logcolours) = full 2008-Apr-27 18:23:40 LOG2 log_preferences: prefs(displaylevel) = INFO3 2008-Apr-27 18:23:40 LOG2 log_preferences: prefs(loglevel) = LOG5 2008-Apr-27 18:23:40 LOG2 log_preferences: prefs(displayformat) = short 2008-Apr-27 18:23:40 LOG2 log_preferences: prefs(logformat) = new 2008-Apr-27 18:23:40 LOG2 log_preferences: prefs(fontsize) = 4 2008-Apr-27 18:23:40 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2008-Apr-27 18:23:40 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2048 2008-Apr-27 18:23:40 ALERT executive: CIMA executive ready 2008-Apr-27 18:23:42 NOTE frontend: CIMA frontend ready 2008-Apr-27 18:23:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:23:43 LOG4 got_cormsg: From DATATAKING: setup 2008-Apr-27 18:23:49 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0x300002 2008-Apr-27 18:23:49 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0x300002' 2008-Apr-27 18:23:49 LOG4 got_cormsg: From DATATAKING: vw% io 2008-Apr-27 18:23:49 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2008-Apr-27 18:23:49 LOG4 got_cormsg: From DATATAKING: 2008-Apr-27 18:23:49 LOG4 got_cormsg: From DATATAKING: vw% tape stat 2008-Apr-27 18:23:49 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2008-Apr-27 18:23:49 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2008-Apr-27 18:23:49 LOG4 got_cormsg: From DATATAKING: vw% connectall 2008-Apr-27 18:23:49 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2008-Apr-27 18:23:49 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2008-Apr-27 18:23:49 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2008-Apr-27 18:23:49 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2008-Apr-27 18:23:49 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2008-Apr-27 18:23:49 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2008-Apr-27 18:23:49 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2008-Apr-27 18:23:49 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2008-Apr-27 18:23:49 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2048 2008-Apr-27 18:23:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:23:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:25:04 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2008-Apr-27 18:25:04 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2008-Apr-27 18:25:04 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2008-Apr-27 18:25:04 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2008-Apr-27 18:25:04 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Apr-27 18:25:04 NOTE select_receiver: Starting to select receiver ALFA 2008-Apr-27 18:25:04 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Apr-27 18:25:04 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Apr-27 18:25:04 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Apr-27 18:25:04 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Apr-27 18:25:04 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Apr-27 18:25:04 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Apr-27 18:25:04 DONE finish_task: DONE finished selecting: receiver ALFA 2008-Apr-27 18:25:04 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-27 18:25:04 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Apr-27 18:25:04 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Apr-27 18:25:04 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Apr-27 18:25:04 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Apr-27 18:25:11 LOG4 got_cormsg: From DATATAKING: waiting for turret position:26.64 2008-Apr-27 18:25:26 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2008-Apr-27 18:25:26 LOG4 exec_msg: From OBSERVER: restart_wapp 2008-Apr-27 18:25:26 LOG5 restart_wapp: Calling 'restart_wapp' 2008-Apr-27 18:25:26 BEGIN begin_task: Starting task 'restarting the WAPPs' 2008-Apr-27 18:25:26 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Apr-27 18:25:26 NOTE restart_wapp: Restarting all WAPPs 2008-Apr-27 18:25:26 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2008-Apr-27 18:25:27 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2008-Apr-27 18:25:27 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Apr-27 18:25:27 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Apr-27 18:25:30 ALERT WAPP=3-wappcon: WAPP3 restarting 2008-Apr-27 18:25:30 ALERT WAPP=4-wappcon: WAPP4 restarting 2008-Apr-27 18:25:30 ALERT WAPP=1-wappcon: WAPP1 restarting 2008-Apr-27 18:25:30 ALERT WAPP=2-wappcon: WAPP2 restarting 2008-Apr-27 18:27:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:27:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:29:14 INFO1 CIMA-run_command_file: Transferring command file 'command_galfasrc.cmd ' to executive ... 2008-Apr-27 18:29:14 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 5 {LOAD togs_ages.conf} 2008-Apr-27 18:29:14 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 6 {CATALOG togs_ages.cat} 2008-Apr-27 18:29:14 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {GOTO galfasrc} 2008-Apr-27 18:29:14 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {ALFAANGLE 19} 2008-Apr-27 18:29:14 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {WAITTRACK} 2008-Apr-27 18:29:14 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 13 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2008-Apr-27 18:29:14 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-Apr-27 18:29:14 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc.cmd 1 1 6 2008-Apr-27 18:29:14 LOG4 run_command_file: Calling 'run_command_file command_galfasrc.cmd 1 1 6' 2008-Apr-27 18:29:14 BEGIN begin_task: Starting task 'running command file 'command_galfasrc.cmd'' 2008-Apr-27 18:29:14 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Apr-27 18:29:14 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc.cmd' ...} 2008-Apr-27 18:29:14 NOTE run_command_file: Starting execution of command file 'command_galfasrc.cmd' from line 1 2008-Apr-27 18:29:14 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_ages.conf' 2008-Apr-27 18:29:14 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2008-Apr-27 18:29:14 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-27 18:29:14 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2008-Apr-27 18:29:14 NOTE CIMA-load_config_file: Loading configuration file 'togs_ages.conf' 2008-Apr-27 18:29:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Apr-27 18:29:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Apr-27 18:29:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Apr-27 18:29:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Apr-27 18:29:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Apr-27 18:29:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2008-Apr-27 18:29:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Apr-27 18:29:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1381.2" 2008-Apr-27 18:29:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1381.2" 2008-Apr-27 18:29:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1381.2" 2008-Apr-27 18:29:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1381.2" 2008-Apr-27 18:29:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1381.2" 2008-Apr-27 18:29:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1381.2" 2008-Apr-27 18:29:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1381.2" 2008-Apr-27 18:29:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1381.2" 2008-Apr-27 18:29:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1381.2" 2008-Apr-27 18:29:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Apr-27 18:29:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Apr-27 18:29:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Apr-27 18:29:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Apr-27 18:29:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Apr-27 18:29:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Apr-27 18:29:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Apr-27 18:29:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Apr-27 18:29:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Apr-27 18:29:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Apr-27 18:29:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Apr-27 18:29:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Apr-27 18:29:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Apr-27 18:29:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2008-Apr-27 18:29:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Apr-27 18:29:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Apr-27 18:29:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Apr-27 18:29:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Apr-27 18:29:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Apr-27 18:29:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Apr-27 18:29:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Apr-27 18:29:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Apr-27 18:29:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Apr-27 18:29:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1631.200000" 2008-Apr-27 18:29:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Apr-27 18:29:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Apr-27 18:29:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Apr-27 18:29:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Apr-27 18:29:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Apr-27 18:29:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Apr-27 18:29:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Apr-27 18:29:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Apr-27 18:29:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Apr-27 18:29:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Apr-27 18:29:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Apr-27 18:29:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Apr-27 18:29:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Apr-27 18:29:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Apr-27 18:29:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Apr-27 18:29:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Apr-27 18:29:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Apr-27 18:29:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Apr-27 18:29:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Apr-27 18:29:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Apr-27 18:29:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Apr-27 18:29:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Apr-27 18:29:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Apr-27 18:29:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Apr-27 18:29:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Apr-27 18:29:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Apr-27 18:29:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Apr-27 18:29:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Apr-27 18:29:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Apr-27 18:29:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Apr-27 18:29:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Apr-27 18:29:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Apr-27 18:29:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Apr-27 18:29:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Apr-27 18:29:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Apr-27 18:29:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Apr-27 18:29:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Apr-27 18:29:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Apr-27 18:29:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Apr-27 18:29:16 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-27 18:29:16 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Apr-27 18:29:16 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Apr-27 18:29:17 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Apr-27 18:29:17 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Apr-27 18:29:17 INFO1 config_iflo: Selecting receiver ALFA 2008-Apr-27 18:29:17 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2008-Apr-27 18:29:17 LOG1 select_receiver: Calling 'select_receiver alfa no no no' 2008-Apr-27 18:29:17 START begin_task: Starting task 'selecting receiver ALFA' 2008-Apr-27 18:29:17 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Apr-27 18:29:17 NOTE select_receiver: Starting to select receiver ALFA 2008-Apr-27 18:29:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Apr-27 18:29:17 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Apr-27 18:29:17 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Apr-27 18:29:17 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Apr-27 18:29:17 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Apr-27 18:29:17 LOG5 finish_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Apr-27 18:29:17 INFO2 finish_task: DONE finished selecting: receiver ALFA 2008-Apr-27 18:29:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 18:29:17 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Apr-27 18:29:17 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Apr-27 18:29:17 START begin_task: Starting task 'waiting for receiver ALFA' 2008-Apr-27 18:29:17 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2008-Apr-27 18:29:17 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2008-Apr-27 18:29:17 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2008-Apr-27 18:29:17 INFO1 config_iflo: Configuring rest of the IF/LO path 2008-Apr-27 18:29:17 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2008-Apr-27 18:29:17 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 18:29:17 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-27 18:29:17 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 18:29:17 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2008-Apr-27 18:29:17 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 18:29:17 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 18:29:17 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2008-Apr-27 18:29:17 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 18:29:17 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-27 18:29:17 LOG3 vw_send: To DATATAKING: alfafb 1 2008-Apr-27 18:29:17 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2008-Apr-27 18:29:17 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Apr-27 18:29:17 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Apr-27 18:29:17 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2008-Apr-27 18:29:17 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2008-Apr-27 18:29:17 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2008-Apr-27 18:29:17 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2008-Apr-27 18:29:17 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2008-Apr-27 18:29:17 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2008-Apr-27 18:29:17 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Apr-27 18:29:17 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Apr-27 18:29:17 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Apr-27 18:29:17 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Apr-27 18:29:17 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Apr-27 18:29:17 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2008-Apr-27 18:29:17 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2008-Apr-27 18:29:17 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2008-Apr-27 18:29:17 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2008-Apr-27 18:29:17 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Apr-27 18:29:17 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2008-Apr-27 18:29:17 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Apr-27 18:29:17 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Apr-27 18:29:17 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 18:29:17 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Apr-27 18:29:17 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2008-Apr-27 18:29:17 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Apr-27 18:29:17 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2008-Apr-27 18:29:17 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2008-Apr-27 18:29:17 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Apr-27 18:29:17 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 18:29:17 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Apr-27 18:29:17 LOG5 begin_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2008-Apr-27 18:29:17 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Apr-27 18:29:17 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Apr-27 18:29:17 LOG4 got_cormsg: From DATATAKING: alfafb 1 2008-Apr-27 18:29:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2008-Apr-27 18:29:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2008-Apr-27 18:29:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2008-Apr-27 18:29:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2008-Apr-27 18:29:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2008-Apr-27 18:29:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2008-Apr-27 18:29:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2008-Apr-27 18:29:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2008-Apr-27 18:29:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2008-Apr-27 18:29:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2008-Apr-27 18:29:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2008-Apr-27 18:29:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Apr-27 18:29:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2008-Apr-27 18:29:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Apr-27 18:29:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 18:29:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Apr-27 18:29:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2008-Apr-27 18:29:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2008-Apr-27 18:29:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2008-Apr-27 18:29:17 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 18:29:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:29:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:29:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:29:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:29:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:29:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:29:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:29:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:29:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:29:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:29:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:29:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:29:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:29:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:29:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:29:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:29:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:29:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:29:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:29:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:29:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:29:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:29:33 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-27 18:29:33 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Apr-27 18:29:33 LOG5 end_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2008-Apr-27 18:29:33 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Apr-27 18:29:33 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Apr-27 18:29:33 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Apr-27 18:29:33 DONE finish_task: DONE finished configuration: IF/LO path 2008-Apr-27 18:29:33 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-27 18:29:33 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Apr-27 18:29:33 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Apr-27 18:29:33 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Apr-27 18:29:33 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Apr-27 18:29:33 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Apr-27 18:29:33 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Apr-27 18:29:33 START begin_task: Starting task 'selecting calibration port' 2008-Apr-27 18:29:33 LOG5 begin_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-Apr-27 18:29:33 LOG3 vw_send: To DATATAKING: calport 3 2008-Apr-27 18:29:33 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Apr-27 18:29:34 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 18:29:34 START begin_task: Starting task 'waiting on calport' 2008-Apr-27 18:29:34 LOG5 begin_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2008-Apr-27 18:29:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:29:34 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Apr-27 18:29:34 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 18:29:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:29:34 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-27 18:29:34 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Apr-27 18:29:34 LOG5 end_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2008-Apr-27 18:29:34 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Apr-27 18:29:34 STOP finish_task: Finishing task 'selecting calibration port' 2008-Apr-27 18:29:34 LOG5 finish_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-Apr-27 18:29:34 INFO2 finish_task: DONE finished configuring: calibration port 2008-Apr-27 18:29:34 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 18:29:34 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Apr-27 18:29:34 LOG5 end_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-Apr-27 18:29:34 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Apr-27 18:29:34 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Apr-27 18:29:34 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Apr-27 18:29:34 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Apr-27 18:29:34 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Apr-27 18:29:34 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Apr-27 18:29:34 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Apr-27 18:29:34 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Apr-27 18:29:34 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Steve Schnei 2008-Apr-27 18:29:34 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Steve Schnei 2008-Apr-27 18:29:34 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Steve Schnei 2008-Apr-27 18:29:34 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Steve Schnei 2008-Apr-27 18:29:34 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Apr-27 18:29:34 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Apr-27 18:29:34 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-27 18:29:34 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2008-Apr-27 18:29:34 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-27 18:29:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:29:34 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-27 18:29:34 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-27 18:29:34 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-27 18:29:34 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2008-Apr-27 18:29:34 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Steve Schnei 2008-Apr-27 18:29:34 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Steve Schnei 2008-Apr-27 18:29:34 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Steve Schnei 2008-Apr-27 18:29:34 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Steve Schnei 2008-Apr-27 18:29:34 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Apr-27 18:29:34 LOG5 finish_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Apr-27 18:29:34 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Apr-27 18:29:34 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-27 18:29:34 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Apr-27 18:29:34 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Apr-27 18:29:35 COMMAND run_command_line: EXECUTING command 6: 'CATALOG togs_ages.cat' 2008-Apr-27 18:29:35 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/togs_ages.cat' 2008-Apr-27 18:29:35 COMMAND run_command_line: EXECUTING command 7: 'GOTO galfasrc' 2008-Apr-27 18:29:35 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2048/togs_ages.cat galfasrc nooffset nowait' 2008-Apr-27 18:29:35 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2008-Apr-27 18:29:35 LOG5 begin_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2008-Apr-27 18:29:35 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2008-Apr-27 18:29:35 LOG3 track_source: Calling 'track_source galfasrc 094300.0 +215300 J 0.0 0.0 main small /share/obs4/usr/a2048/togs_ages.cat 0 Topocentric velocity(optical)' 2008-Apr-27 18:29:35 START begin_task: Starting task 'sending tracking commands' 2008-Apr-27 18:29:35 LOG5 begin_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2008-Apr-27 18:29:35 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2008-Apr-27 18:29:35 INFO1 track_source: Starting to track galfasrc 2008-Apr-27 18:29:35 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2008-Apr-27 18:29:35 LOG3 vw_send: To DATATAKING: set ra 094300.0 2008-Apr-27 18:29:35 LOG3 vw_send: To DATATAKING: set dec +215300 2008-Apr-27 18:29:35 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-27 18:29:35 LOG3 vw_send: To DATATAKING: pnt tr 094300.0 +215300 -CJ 2008-Apr-27 18:29:35 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Apr-27 18:29:35 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-27 18:29:35 LOG5 finish_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2008-Apr-27 18:29:35 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-27 18:29:35 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 18:29:35 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-27 18:29:35 LOG5 end_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2008-Apr-27 18:29:35 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2008-Apr-27 18:29:35 LOG5 finish_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2008-Apr-27 18:29:35 DONE finish_task: DONE finished tracking: source 'galfasrc' 2008-Apr-27 18:29:35 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-27 18:29:35 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2008-Apr-27 18:29:35 LOG5 end_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2008-Apr-27 18:29:35 COMMAND run_command_line: EXECUTING command 8: 'ALFAANGLE 19' 2008-Apr-27 18:29:35 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2008-Apr-27 18:29:35 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Apr-27 18:29:35 LOG5 begin_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2008-Apr-27 18:29:35 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Apr-27 18:29:35 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Apr-27 18:29:35 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-Apr-27 18:29:35 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-27 18:29:35 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-27 18:29:35 LOG5 begin_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2008-Apr-27 18:29:35 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Steve Schnei' 2008-Apr-27 18:29:35 NOTE WAPPDATA-new_file: New FITS file: wapp.20080427.a2048.0000.fits 2008-Apr-27 18:29:35 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2008-Apr-27 18:29:35 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Apr-27 18:29:35 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Apr-27 18:29:35 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20080427.a2048.0000.fits} 2008-Apr-27 18:29:35 LOG4 got_cormsg: From DATATAKING: set ra 094300.0 2008-Apr-27 18:29:35 LOG4 got_cormsg: From DATATAKING: set dec +215300 2008-Apr-27 18:29:35 LOG4 got_cormsg: From DATATAKING: vw% 094300.0 2008-Apr-27 18:29:35 LOG4 got_cormsg: From DATATAKING: vw% +215300 2008-Apr-27 18:29:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:29:35 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-27 18:29:35 LOG4 got_cormsg: From DATATAKING: pnt tr 094300.0 +215300 -CJ 2008-Apr-27 18:29:35 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Apr-27 18:29:35 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-27 18:29:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:29:36 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Steve Schnei' 2008-Apr-27 18:29:43 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-27 18:29:43 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Apr-27 18:29:43 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-27 18:29:43 LOG5 end_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2008-Apr-27 18:29:43 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-27 18:29:43 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Apr-27 18:29:43 LOG5 finish_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2008-Apr-27 18:29:43 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Apr-27 18:29:43 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-27 18:29:43 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Apr-27 18:29:43 LOG5 end_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2008-Apr-27 18:29:43 COMMAND run_command_line: EXECUTING command 9: 'WAITTRACK' 2008-Apr-27 18:29:43 BEGIN begin_task: Starting task 'waiting on telescope' 2008-Apr-27 18:29:43 LOG5 begin_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2008-Apr-27 18:29:43 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-27 18:29:43 LOG3 waittrk: Start waittrk 5 2008-Apr-27 18:29:43 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-27 18:29:43 LOG5 begin_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2008-Apr-27 18:29:48 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-27 18:29:48 LOG5 end_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2008-Apr-27 18:29:48 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-27 18:29:48 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2008-Apr-27 18:33:09 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-27 18:33:09 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2008-Apr-27 18:33:09 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-27 18:33:09 INFO2 waittrk: Now tracking galfasrc 2008-Apr-27 18:33:09 LOG4 waittrk: Current telescope position: Az = 254.92 ZA = 17.32 2008-Apr-27 18:33:09 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-27 18:33:09 LOG5 finish_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2008-Apr-27 18:33:09 DONE finish_task: DONE finished waiting: telescope on source 2008-Apr-27 18:33:09 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-27 18:33:09 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-27 18:33:09 LOG5 end_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2008-Apr-27 18:33:09 COMMAND run_command_line: EXECUTING command 13: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2008-Apr-27 18:33:09 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2008-Apr-27 18:33:10 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-27 18:33:10 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first 0 {1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2008-Apr-27 18:33:10 BEGIN begin_task: Starting task 'smart frequency switching' 2008-Apr-27 18:33:10 LOG5 begin_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2008-Apr-27 18:33:10 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'galfasrc' 2008-Apr-27 18:33:10 INFO1 smartfreq: Starting pattern: Smart frequency switching 2008-Apr-27 18:33:10 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2008-Apr-27 18:33:10 START begin_task: Starting task 'selecting calibration type' 2008-Apr-27 18:33:10 LOG5 begin_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2008-Apr-27 18:33:10 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-27 18:33:10 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-27 18:33:10 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 18:33:10 START begin_task: Starting task 'waiting on setcal' 2008-Apr-27 18:33:10 LOG5 begin_task: Level: (4) ID = <10022> Status = 0 0 0 0 ok 2008-Apr-27 18:33:10 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-27 18:33:10 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 18:33:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:33:10 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-27 18:33:10 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-27 18:33:10 LOG5 end_task: Level: (4) ID = <10022> Status = 0 0 0 0 ok 2008-Apr-27 18:33:10 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-27 18:33:10 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 18:33:10 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-27 18:33:10 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 18:33:10 LOG5 begin_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2008-Apr-27 18:33:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:33:10 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 18:33:10 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 18:33:10 LOG5 end_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2008-Apr-27 18:33:10 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 18:33:10 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-27 18:33:10 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 18:33:10 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-27 18:33:10 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 18:33:10 LOG5 begin_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2008-Apr-27 18:33:10 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 18:33:10 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 18:33:10 LOG5 end_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2008-Apr-27 18:33:10 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 18:33:10 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-27 18:33:10 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-27 18:33:10 LOG5 finish_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2008-Apr-27 18:33:10 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-27 18:33:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 18:33:10 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-27 18:33:10 LOG5 end_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2008-Apr-27 18:33:10 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Steve Schnei 2008-Apr-27 18:33:10 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Steve Schnei 2008-Apr-27 18:33:10 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Steve Schnei 2008-Apr-27 18:33:10 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Steve Schnei 2008-Apr-27 18:33:10 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20080427.a2048.0000.fits' is empty! 2008-Apr-27 18:33:10 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2008-Apr-27 18:33:10 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-27 18:33:10 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2008-Apr-27 18:33:11 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-27 18:33:11 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-27 18:33:11 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-27 18:33:11 LOG5 begin_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2008-Apr-27 18:33:11 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-27 18:33:11 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-27 18:33:11 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-27 18:33:11 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-27 18:33:11 LOG5 end_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2008-Apr-27 18:33:11 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2008-Apr-27 18:33:11 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-27 18:33:11 LOG5 begin_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-Apr-27 18:33:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-27 18:33:11 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-27 18:33:11 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-27 18:33:11 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-27 18:33:11 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 18:33:11 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-27 18:33:11 LOG5 begin_task: Level: (4) ID = <10027> Status = 0 0 0 0 ok 2008-Apr-27 18:33:11 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-27 18:33:11 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 18:33:11 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Steve Schnei' 2008-Apr-27 18:33:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:33:14 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-27 18:33:14 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-27 18:33:14 LOG5 end_task: Level: (4) ID = <10027> Status = 0 0 0 0 ok 2008-Apr-27 18:33:14 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-27 18:33:14 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-27 18:33:14 LOG5 begin_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2008-Apr-27 18:33:14 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-27 18:33:14 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-27 18:33:14 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-27 18:33:14 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-27 18:33:14 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-27 18:33:14 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-27 18:33:14 LOG5 begin_task: Level: (5) ID = <10029> Status = 0 0 0 0 ok 2008-Apr-27 18:33:14 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-27 18:33:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:33:14 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 1 dB --- beam 1: 8 7 dB 2008-Apr-27 18:33:14 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 7 4 dB --- beam 3: 4 4 dB 2008-Apr-27 18:33:14 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 7 6 dB 2008-Apr-27 18:33:14 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 3 dB --- beam 7: 3 3 dB 2008-Apr-27 18:33:14 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-27 18:33:14 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-27 18:33:14 LOG5 end_task: Level: (5) ID = <10029> Status = 0 0 0 0 ok 2008-Apr-27 18:33:14 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.928 1.047 ALFA beam 1: 0.938 0.956 2008-Apr-27 18:33:15 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.894 1.064 ALFA beam 3: 1.100 0.956 2008-Apr-27 18:33:15 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.041 1.080 ALFA beam 5: 0.899 0.996 2008-Apr-27 18:33:15 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.073 0.881 ALFA beam 7: 0.943 0.987 2008-Apr-27 18:33:15 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-27 18:33:15 LOG5 finish_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2008-Apr-27 18:33:15 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-27 18:33:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 18:33:15 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-27 18:33:15 LOG5 end_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2008-Apr-27 18:33:15 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-27 18:33:15 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-27 18:33:15 LOG5 finish_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-Apr-27 18:33:15 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-27 18:33:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 18:33:15 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-27 18:33:15 LOG5 end_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-Apr-27 18:33:15 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2008-Apr-27 18:33:15 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2008-Apr-27 18:33:15 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2008-Apr-27 18:33:15 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-27 18:33:15 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32518 J 2008-Apr-27 18:33:15 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.3 2008-Apr-27 18:33:15 LOG2 antvel: Parameters to Doppler: Topocentric 81194 2008 118 0.0 2008-Apr-27 18:33:15 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-27 18:33:15 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2008-Apr-27 18:33:15 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2008-Apr-27 18:33:15 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-27 18:33:15 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-27 18:33:15 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Apr-27 18:33:15 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 18:33:15 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-27 18:33:15 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-27 18:33:15 LOG5 begin_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2008-Apr-27 18:33:15 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-27 18:33:15 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.522013 2008.3251829670191 18.999933 2008-Apr-27 18:33:15 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333347 2008-Apr-27 18:33:15 LOG4 log_alfabeam: ALFABEAM 1 9.709410054603394 21.850749976231487 2008-Apr-27 18:33:15 LOG4 log_alfabeam: ALFABEAM 2 9.715096170416894 21.792875184391598 2008-Apr-27 18:33:15 LOG4 log_alfabeam: ALFABEAM 3 9.722359415372569 21.825079079818956 2008-Apr-27 18:33:15 LOG4 log_alfabeam: ALFABEAM 4 9.723923223382817 21.916045321438784 2008-Apr-27 18:33:15 LOG4 log_alfabeam: ALFABEAM 5 9.718205805453186 21.974059654482655 2008-Apr-27 18:33:15 LOG4 log_alfabeam: ALFABEAM 6 9.710956037101068 21.940968455528520 2008-Apr-27 18:33:15 INFO2 take_spectra: Starting WAPP+GALFA scan: 811800061 2008-Apr-27 18:33:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-27 18:33:15 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-27 18:33:15 LOG5 begin_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2008-Apr-27 18:33:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 18:33:15 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Apr-27 18:33:15 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 18:33:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:33:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:33:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81196.00 2008-Apr-27 18:33:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 18:33:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:33:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:33:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-27 18:33:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:33:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-27 18:33:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-27 18:33:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-27 18:33:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-27 18:33:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 18:33:26 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-27 18:33:26 LOG5 end_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2008-Apr-27 18:33:26 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-27 18:33:26 LOG5 end_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2008-Apr-27 18:33:26 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2008-Apr-27 18:33:26 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2008-Apr-27 18:33:26 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2008-Apr-27 18:33:26 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-27 18:33:26 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32518 J 2008-Apr-27 18:33:26 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.3 2008-Apr-27 18:33:26 LOG2 antvel: Parameters to Doppler: Topocentric 81206 2008 118 0.0 2008-Apr-27 18:33:26 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-27 18:33:26 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2008-Apr-27 18:33:26 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2008-Apr-27 18:33:26 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-27 18:33:26 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-27 18:33:26 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Apr-27 18:33:26 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 18:33:26 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-27 18:33:26 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-27 18:33:26 LOG5 begin_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2008-Apr-27 18:33:26 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-27 18:33:26 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.525355 2008.3251833472762 18.999933 2008-Apr-27 18:33:26 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666663 21.883333333333347 2008-Apr-27 18:33:26 LOG4 log_alfabeam: ALFABEAM 1 9.709411714048549 21.850678599905400 2008-Apr-27 18:33:26 LOG4 log_alfabeam: ALFABEAM 2 9.715100732037662 21.792860083436949 2008-Apr-27 18:33:26 LOG4 log_alfabeam: ALFABEAM 3 9.722362364425049 21.825134502188501 2008-Apr-27 18:33:26 LOG4 log_alfabeam: ALFABEAM 4 9.723921550645546 21.916117265352959 2008-Apr-27 18:33:26 LOG4 log_alfabeam: ALFABEAM 5 9.718201129797123 21.974075215391995 2008-Apr-27 18:33:26 LOG4 log_alfabeam: ALFABEAM 6 9.710953081937916 21.940911223940812 2008-Apr-27 18:33:26 INFO2 take_spectra: Starting WAPP+GALFA scan: 811800062 2008-Apr-27 18:33:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-27 18:33:27 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-27 18:33:27 LOG5 begin_task: Level: (4) ID = <10033> Status = 0 0 0 0 ok 2008-Apr-27 18:33:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 18:33:27 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Apr-27 18:33:27 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 18:33:27 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:33:27 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:33:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81208.00 2008-Apr-27 18:33:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 18:33:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:33:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:33:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-27 18:33:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:33:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-27 18:33:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-27 18:33:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-27 18:33:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-27 18:33:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 18:33:38 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-27 18:33:38 LOG5 end_task: Level: (4) ID = <10033> Status = 0 0 0 0 ok 2008-Apr-27 18:33:38 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-27 18:33:38 LOG5 end_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2008-Apr-27 18:33:38 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2008-Apr-27 18:33:38 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2008-Apr-27 18:33:38 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2008-Apr-27 18:33:38 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-27 18:33:38 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32518 J 2008-Apr-27 18:33:38 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.3 2008-Apr-27 18:33:38 LOG2 antvel: Parameters to Doppler: Topocentric 81218 2008 118 0.0 2008-Apr-27 18:33:38 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-27 18:33:38 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2008-Apr-27 18:33:38 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2008-Apr-27 18:33:38 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-27 18:33:38 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-27 18:33:38 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Apr-27 18:33:38 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 18:33:38 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-27 18:33:38 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-27 18:33:38 LOG5 begin_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2008-Apr-27 18:33:38 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-27 18:33:38 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.528698 2008.3251837275332 18.999933 2008-Apr-27 18:33:38 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666670 21.883333333333329 2008-Apr-27 18:33:38 LOG4 log_alfabeam: ALFABEAM 1 9.709413384497919 21.850606923599006 2008-Apr-27 18:33:38 LOG4 log_alfabeam: ALFABEAM 2 9.715105314607852 21.792844960735199 2008-Apr-27 18:33:38 LOG4 log_alfabeam: ALFABEAM 3 9.722365323745251 21.825190198828306 2008-Apr-27 18:33:38 LOG4 log_alfabeam: ALFABEAM 4 9.723919866772601 21.916189512077157 2008-Apr-27 18:33:38 LOG4 log_alfabeam: ALFABEAM 5 9.718196432529684 21.974090798743845 2008-Apr-27 18:33:38 LOG4 log_alfabeam: ALFABEAM 6 9.710950116628075 21.940853708071554 2008-Apr-27 18:33:38 INFO2 take_spectra: Starting WAPP+GALFA scan: 811800063 2008-Apr-27 18:33:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-27 18:33:39 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-27 18:33:39 LOG5 begin_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2008-Apr-27 18:33:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 18:33:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Apr-27 18:33:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 18:33:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:33:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:33:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81220.00 2008-Apr-27 18:33:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 18:33:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:33:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:33:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-27 18:33:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:33:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-27 18:33:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-27 18:33:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-27 18:33:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-27 18:33:50 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 18:33:50 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-27 18:33:50 LOG5 end_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2008-Apr-27 18:33:50 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-27 18:33:50 LOG5 end_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2008-Apr-27 18:33:50 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2008-Apr-27 18:33:50 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2008-Apr-27 18:33:50 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2008-Apr-27 18:33:50 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-27 18:33:50 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32518 J 2008-Apr-27 18:33:50 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.3 2008-Apr-27 18:33:50 LOG2 antvel: Parameters to Doppler: Topocentric 81230 2008 118 0.0 2008-Apr-27 18:33:50 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-27 18:33:50 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2008-Apr-27 18:33:50 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2008-Apr-27 18:33:50 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-27 18:33:50 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-27 18:33:50 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Apr-27 18:33:50 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 18:33:50 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-27 18:33:50 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-27 18:33:50 LOG5 begin_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2008-Apr-27 18:33:50 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-27 18:33:50 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.532040 2008.3251841077902 18.999933 2008-Apr-27 18:33:50 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333333 2008-Apr-27 18:33:50 LOG4 log_alfabeam: ALFABEAM 1 9.709415065051655 21.850534988069953 2008-Apr-27 18:33:50 LOG4 log_alfabeam: ALFABEAM 2 9.715109915543882 21.792829825400823 2008-Apr-27 18:33:50 LOG4 log_alfabeam: ALFABEAM 3 9.722368291624111 21.825246138584745 2008-Apr-27 18:33:50 LOG4 log_alfabeam: ALFABEAM 4 9.723918172670469 21.916262020530787 2008-Apr-27 18:33:50 LOG4 log_alfabeam: ALFABEAM 5 9.718191716297927 21.974106395138417 2008-Apr-27 18:33:50 LOG4 log_alfabeam: ALFABEAM 6 9.710947142886305 21.940795940089039 2008-Apr-27 18:33:50 INFO2 take_spectra: Starting WAPP+GALFA scan: 811800064 2008-Apr-27 18:33:51 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-27 18:33:51 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-27 18:33:51 LOG5 begin_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2008-Apr-27 18:33:51 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 18:33:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Apr-27 18:33:51 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 18:33:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:33:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:33:51 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81232.00 2008-Apr-27 18:33:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 18:33:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:33:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:33:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-27 18:33:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:33:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-27 18:33:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-27 18:33:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-27 18:33:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-27 18:34:02 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 18:34:02 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-27 18:34:02 LOG5 end_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2008-Apr-27 18:34:02 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-27 18:34:02 LOG5 end_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2008-Apr-27 18:34:02 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2008-Apr-27 18:34:02 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2008-Apr-27 18:34:02 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2008-Apr-27 18:34:02 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-27 18:34:02 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32518 J 2008-Apr-27 18:34:02 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.3 2008-Apr-27 18:34:02 LOG2 antvel: Parameters to Doppler: Topocentric 81242 2008 118 0.0 2008-Apr-27 18:34:02 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-27 18:34:02 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2008-Apr-27 18:34:02 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2008-Apr-27 18:34:02 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-27 18:34:02 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-27 18:34:02 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Apr-27 18:34:02 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 18:34:02 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-27 18:34:02 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-27 18:34:02 LOG5 begin_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2008-Apr-27 18:34:02 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-27 18:34:02 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.535383 2008.3251844880474 18.999933 2008-Apr-27 18:34:02 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333336 2008-Apr-27 18:34:02 LOG4 log_alfabeam: ALFABEAM 1 9.709416756816292 21.850462748123352 2008-Apr-27 18:34:02 LOG4 log_alfabeam: ALFABEAM 2 9.715114537758920 21.792814668446564 2008-Apr-27 18:34:02 LOG4 log_alfabeam: ALFABEAM 3 9.722371269899639 21.825302357127121 2008-Apr-27 18:34:02 LOG4 log_alfabeam: ALFABEAM 4 9.723916467223143 21.916334836269879 2008-Apr-27 18:34:02 LOG4 log_alfabeam: ALFABEAM 5 9.718186978114520 21.974122013828921 2008-Apr-27 18:34:02 LOG4 log_alfabeam: ALFABEAM 6 9.710944158873273 21.940737883155485 2008-Apr-27 18:34:02 INFO2 take_spectra: Starting WAPP+GALFA scan: 811800065 2008-Apr-27 18:34:03 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-27 18:34:03 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-27 18:34:03 LOG5 begin_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2008-Apr-27 18:34:03 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 18:34:03 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Apr-27 18:34:03 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 18:34:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:34:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:34:03 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81244.00 2008-Apr-27 18:34:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 18:34:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:34:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:34:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-27 18:34:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:34:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-27 18:34:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-27 18:34:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-27 18:34:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-27 18:34:14 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 18:34:14 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-27 18:34:14 LOG5 end_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2008-Apr-27 18:34:14 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-27 18:34:14 LOG5 end_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2008-Apr-27 18:34:14 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2008-Apr-27 18:34:14 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2008-Apr-27 18:34:14 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2008-Apr-27 18:34:14 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-27 18:34:14 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32518 J 2008-Apr-27 18:34:14 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.3 2008-Apr-27 18:34:14 LOG2 antvel: Parameters to Doppler: Topocentric 81254 2008 118 0.0 2008-Apr-27 18:34:14 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-27 18:34:14 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2008-Apr-27 18:34:14 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2008-Apr-27 18:34:14 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-27 18:34:14 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-27 18:34:14 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Apr-27 18:34:14 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 18:34:14 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-27 18:34:14 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-27 18:34:14 LOG5 begin_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2008-Apr-27 18:34:14 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-27 18:34:14 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.538725 2008.3251848683044 18.999933 2008-Apr-27 18:34:14 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333333 2008-Apr-27 18:34:14 LOG4 log_alfabeam: ALFABEAM 1 9.709418458881709 21.850390244812360 2008-Apr-27 18:34:14 LOG4 log_alfabeam: ALFABEAM 2 9.715119178648994 21.792799499014002 2008-Apr-27 18:34:14 LOG4 log_alfabeam: ALFABEAM 3 9.722374256852371 21.825358823037554 2008-Apr-27 18:34:14 LOG4 log_alfabeam: ALFABEAM 4 9.723914751347516 21.916407917915365 2008-Apr-27 18:34:14 LOG4 log_alfabeam: ALFABEAM 5 9.718182220647561 21.974137645387327 2008-Apr-27 18:34:14 LOG4 log_alfabeam: ALFABEAM 6 9.710941166314074 21.940679569713421 2008-Apr-27 18:34:14 INFO2 take_spectra: Starting WAPP+GALFA scan: 811800066 2008-Apr-27 18:34:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-27 18:34:15 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-27 18:34:15 LOG5 begin_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2008-Apr-27 18:34:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 18:34:15 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Apr-27 18:34:15 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 18:34:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:34:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:34:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81256.00 2008-Apr-27 18:34:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 18:34:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:34:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:34:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-27 18:34:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:34:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-27 18:34:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-27 18:34:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-27 18:34:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-27 18:34:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 18:34:26 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-27 18:34:26 LOG5 end_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2008-Apr-27 18:34:26 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-27 18:34:26 LOG5 end_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2008-Apr-27 18:34:26 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2008-Apr-27 18:34:26 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2008-Apr-27 18:34:26 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2008-Apr-27 18:34:26 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-27 18:34:26 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32519 J 2008-Apr-27 18:34:26 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.3 2008-Apr-27 18:34:26 LOG2 antvel: Parameters to Doppler: Topocentric 81266 2008 118 0.0 2008-Apr-27 18:34:26 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-27 18:34:26 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2008-Apr-27 18:34:26 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2008-Apr-27 18:34:26 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-27 18:34:26 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-27 18:34:26 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Apr-27 18:34:26 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 18:34:26 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-27 18:34:26 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-27 18:34:26 LOG5 begin_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2008-Apr-27 18:34:26 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-27 18:34:26 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.542068 2008.3251852485614 18.999933 2008-Apr-27 18:34:26 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666665 21.883333333333347 2008-Apr-27 18:34:26 LOG4 log_alfabeam: ALFABEAM 1 9.709420172369823 21.850317432560168 2008-Apr-27 18:34:26 LOG4 log_alfabeam: ALFABEAM 2 9.715123841154561 21.792784308102227 2008-Apr-27 18:34:26 LOG4 log_alfabeam: ALFABEAM 3 9.722377254332686 21.825415572348842 2008-Apr-27 18:34:26 LOG4 log_alfabeam: ALFABEAM 4 9.723913023911994 21.916481311408916 2008-Apr-27 18:34:26 LOG4 log_alfabeam: ALFABEAM 5 9.718177440881545 21.974153299080598 2008-Apr-27 18:34:26 LOG4 log_alfabeam: ALFABEAM 6 9.710938163357238 21.940620962548504 2008-Apr-27 18:34:26 INFO2 take_spectra: Starting WAPP+GALFA scan: 811800067 2008-Apr-27 18:34:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-27 18:34:27 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-27 18:34:27 LOG5 begin_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2008-Apr-27 18:34:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 18:34:27 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Apr-27 18:34:27 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 18:34:27 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:34:27 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:34:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81268.00 2008-Apr-27 18:34:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 18:34:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:34:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:34:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-27 18:34:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:34:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-27 18:34:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-27 18:34:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-27 18:34:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-27 18:34:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 18:34:38 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-27 18:34:38 LOG5 end_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2008-Apr-27 18:34:38 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-27 18:34:38 LOG5 end_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2008-Apr-27 18:34:38 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2008-Apr-27 18:34:38 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-27 18:34:38 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-27 18:34:38 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-27 18:34:38 LOG5 begin_task: Level: (3) ID = <10044> Status = 0 0 0 0 ok 2008-Apr-27 18:34:38 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-27 18:34:38 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-27 18:34:38 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-27 18:34:38 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-27 18:34:38 LOG5 end_task: Level: (3) ID = <10044> Status = 0 0 0 0 ok 2008-Apr-27 18:34:38 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2008-Apr-27 18:34:38 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2008-Apr-27 18:34:38 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2008-Apr-27 18:34:38 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-27 18:34:38 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32519 J 2008-Apr-27 18:34:38 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.3 2008-Apr-27 18:34:38 LOG2 antvel: Parameters to Doppler: Topocentric 81278 2008 118 0.0 2008-Apr-27 18:34:38 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-27 18:34:38 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2008-Apr-27 18:34:38 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2008-Apr-27 18:34:38 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-27 18:34:38 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-27 18:34:38 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Apr-27 18:34:38 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 18:34:38 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-27 18:34:38 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-27 18:34:38 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2008-Apr-27 18:34:38 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-27 18:34:38 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.545410 2008.3251856288184 18.999933 2008-Apr-27 18:34:38 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333333 2008-Apr-27 18:34:38 LOG4 log_alfabeam: ALFABEAM 1 9.709421896360062 21.850244352719518 2008-Apr-27 18:34:38 LOG4 log_alfabeam: ALFABEAM 2 9.715128522650986 21.792769104880048 2008-Apr-27 18:34:38 LOG4 log_alfabeam: ALFABEAM 3 9.722380260610569 21.825472573374867 2008-Apr-27 18:34:38 LOG4 log_alfabeam: ALFABEAM 4 9.723911285844052 21.916554975068777 2008-Apr-27 18:34:38 LOG4 log_alfabeam: ALFABEAM 5 9.718172641505921 21.974168965452240 2008-Apr-27 18:34:38 LOG4 log_alfabeam: ALFABEAM 6 9.710935151738322 21.940562094381647 2008-Apr-27 18:34:38 INFO2 take_spectra: Starting WAPP+GALFA scan: 811800068 2008-Apr-27 18:34:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-27 18:34:39 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-27 18:34:39 LOG5 begin_task: Level: (4) ID = <10046> Status = 0 0 0 0 ok 2008-Apr-27 18:34:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 18:34:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Apr-27 18:34:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 18:34:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:34:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:34:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81280.00 2008-Apr-27 18:34:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 18:34:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:34:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:34:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-27 18:34:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:34:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-27 18:34:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-27 18:34:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-27 18:34:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-27 18:34:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.573 > 1.4)! 2008-Apr-27 18:34:43 LOG4 check_wapp_levels: WAPP-1 power levels: 1.335 1.366 1.310 1.284 2008-Apr-27 18:34:43 LOG4 check_wapp_levels: WAPP-2 power levels: 1.209 1.475 1.573 1.297 2008-Apr-27 18:34:43 LOG4 check_wapp_levels: WAPP-3 power levels: 1.494 1.513 1.305 1.360 2008-Apr-27 18:34:43 LOG4 check_wapp_levels: WAPP-4 power levels: 1.531 1.240 1.336 1.384 2008-Apr-27 18:34:45 INFO5 check_wapp_levels: WAPP power levels are between 1.207 and 1.572 (still bad) 2008-Apr-27 18:34:47 INFO5 check_wapp_levels: WAPP power levels are between 1.209 and 1.570 (still bad) 2008-Apr-27 18:34:49 INFO5 check_wapp_levels: WAPP power levels are between 1.208 and 1.571 (still bad) 2008-Apr-27 18:34:50 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 18:34:50 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-27 18:34:50 LOG5 end_task: Level: (4) ID = <10046> Status = 0 0 0 0 ok 2008-Apr-27 18:34:50 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-27 18:34:50 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2008-Apr-27 18:34:50 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2008-Apr-27 18:34:50 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2008-Apr-27 18:34:50 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2008-Apr-27 18:34:50 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-27 18:34:50 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32519 J 2008-Apr-27 18:34:50 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.3 2008-Apr-27 18:34:50 LOG2 antvel: Parameters to Doppler: Topocentric 81290 2008 118 0.0 2008-Apr-27 18:34:50 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-27 18:34:50 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2008-Apr-27 18:34:50 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2008-Apr-27 18:34:50 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-27 18:34:50 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-27 18:34:50 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Apr-27 18:34:50 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 18:34:50 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-27 18:34:50 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-27 18:34:50 LOG5 begin_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2008-Apr-27 18:34:50 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-27 18:34:50 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.548753 2008.3251860090754 18.999933 2008-Apr-27 18:34:50 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333329 2008-Apr-27 18:34:50 LOG4 log_alfabeam: ALFABEAM 1 9.709423631990042 21.850170959325329 2008-Apr-27 18:34:50 LOG4 log_alfabeam: ALFABEAM 2 9.715133226106477 21.792753880333429 2008-Apr-27 18:34:50 LOG4 log_alfabeam: ALFABEAM 3 9.722383277548914 21.825529862518653 2008-Apr-27 18:34:50 LOG4 log_alfabeam: ALFABEAM 4 9.723909535996185 21.916628955228418 2008-Apr-27 18:34:50 LOG4 log_alfabeam: ALFABEAM 5 9.718167819476516 21.974184653782419 2008-Apr-27 18:34:50 LOG4 log_alfabeam: ALFABEAM 6 9.710932129593553 21.940502927614965 2008-Apr-27 18:34:50 INFO2 take_spectra: Starting WAPP+GALFA scan: 811800069 2008-Apr-27 18:34:51 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-27 18:34:51 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-27 18:34:51 LOG5 begin_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2008-Apr-27 18:34:51 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 18:34:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Apr-27 18:34:51 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 18:34:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:34:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:34:51 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81292.00 2008-Apr-27 18:34:52 INFO5 check_wapp_levels: WAPP power levels are between 1.206 and 1.569 (still bad) 2008-Apr-27 18:34:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 18:34:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:34:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:34:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-27 18:34:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:34:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-27 18:34:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-27 18:34:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-27 18:34:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-27 18:34:54 INFO5 check_wapp_levels: WAPP power levels are between 1.189 and 1.493 (still bad) 2008-Apr-27 18:34:56 INFO5 check_wapp_levels: WAPP power levels are between 1.188 and 1.494 (still bad) 2008-Apr-27 18:34:58 INFO5 check_wapp_levels: WAPP power levels are between 1.187 and 1.494 (still bad) 2008-Apr-27 18:35:00 INFO5 check_wapp_levels: WAPP power levels are between 1.190 and 1.494 (still bad) 2008-Apr-27 18:35:02 INFO5 check_wapp_levels: WAPP power levels are between 1.188 and 1.492 (still bad) 2008-Apr-27 18:35:02 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 18:35:02 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-27 18:35:02 LOG5 end_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2008-Apr-27 18:35:02 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-27 18:35:02 LOG5 end_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2008-Apr-27 18:35:02 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2008-Apr-27 18:35:02 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2008-Apr-27 18:35:02 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2008-Apr-27 18:35:02 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-27 18:35:02 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32519 J 2008-Apr-27 18:35:02 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.3 2008-Apr-27 18:35:02 LOG2 antvel: Parameters to Doppler: Topocentric 81302 2008 118 0.0 2008-Apr-27 18:35:02 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-27 18:35:02 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2008-Apr-27 18:35:02 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2008-Apr-27 18:35:02 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-27 18:35:02 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-27 18:35:02 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Apr-27 18:35:02 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 18:35:02 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-27 18:35:02 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-27 18:35:02 LOG5 begin_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2008-Apr-27 18:35:02 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-27 18:35:02 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.552095 2008.3251863893327 18.999933 2008-Apr-27 18:35:02 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333336 2008-Apr-27 18:35:02 LOG4 log_alfabeam: ALFABEAM 1 9.709425378328577 21.850097294034352 2008-Apr-27 18:35:02 LOG4 log_alfabeam: ALFABEAM 2 9.715137948875423 21.792738643658559 2008-Apr-27 18:35:02 LOG4 log_alfabeam: ALFABEAM 3 9.722386303407047 21.825587407821846 2008-Apr-27 18:35:02 LOG4 log_alfabeam: ALFABEAM 4 9.723907775306618 21.916703209899325 2008-Apr-27 18:35:02 LOG4 log_alfabeam: ALFABEAM 5 9.718162977504438 21.974200354586131 2008-Apr-27 18:35:02 LOG4 log_alfabeam: ALFABEAM 6 9.710929098669091 21.940443495252030 2008-Apr-27 18:35:02 INFO2 take_spectra: Starting WAPP+GALFA scan: 811800070 2008-Apr-27 18:35:03 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-27 18:35:03 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-27 18:35:03 LOG5 begin_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2008-Apr-27 18:35:03 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 18:35:03 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Apr-27 18:35:03 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 18:35:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:35:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:35:03 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81304.00 2008-Apr-27 18:35:04 INFO5 check_wapp_levels: WAPP power levels are between 1.189 and 1.491 (still bad) 2008-Apr-27 18:35:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 18:35:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:35:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:35:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-27 18:35:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:35:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-27 18:35:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-27 18:35:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-27 18:35:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-27 18:35:06 INFO5 check_wapp_levels: WAPP power levels are between 1.189 and 1.487 (still bad) 2008-Apr-27 18:35:08 INFO5 check_wapp_levels: WAPP power levels are between 1.185 and 1.488 (still bad) 2008-Apr-27 18:35:10 INFO5 check_wapp_levels: WAPP power levels are between 1.186 and 1.487 (still bad) 2008-Apr-27 18:35:12 INFO5 check_wapp_levels: WAPP power levels are between 1.185 and 1.486 (still bad) 2008-Apr-27 18:35:14 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 18:35:14 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-27 18:35:14 LOG5 end_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2008-Apr-27 18:35:14 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-27 18:35:14 LOG5 end_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2008-Apr-27 18:35:14 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2008-Apr-27 18:35:14 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2008-Apr-27 18:35:14 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2008-Apr-27 18:35:14 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-27 18:35:14 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32519 J 2008-Apr-27 18:35:14 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.3 2008-Apr-27 18:35:14 LOG2 antvel: Parameters to Doppler: Topocentric 81314 2008 118 0.0 2008-Apr-27 18:35:14 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-27 18:35:14 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2008-Apr-27 18:35:14 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2008-Apr-27 18:35:14 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-27 18:35:14 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-27 18:35:14 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Apr-27 18:35:14 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 18:35:14 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-27 18:35:14 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-27 18:35:14 LOG5 begin_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2008-Apr-27 18:35:14 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-27 18:35:14 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.555438 2008.3251867695897 18.999933 2008-Apr-27 18:35:14 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666665 21.883333333333340 2008-Apr-27 18:35:14 LOG4 log_alfabeam: ALFABEAM 1 9.709427136529321 21.850023310486868 2008-Apr-27 18:35:14 LOG4 log_alfabeam: ALFABEAM 2 9.715142693954284 21.792723385828811 2008-Apr-27 18:35:14 LOG4 log_alfabeam: ALFABEAM 3 9.722389340060543 21.825645246064521 2008-Apr-27 18:35:14 LOG4 log_alfabeam: ALFABEAM 4 9.723906002611596 21.916777785813181 2008-Apr-27 18:35:14 LOG4 log_alfabeam: ALFABEAM 5 9.718158112516347 21.974216077156125 2008-Apr-27 18:35:14 LOG4 log_alfabeam: ALFABEAM 6 9.710926057088715 21.940383759304421 2008-Apr-27 18:35:14 INFO2 take_spectra: Starting WAPP+GALFA scan: 811800071 2008-Apr-27 18:35:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-27 18:35:15 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-27 18:35:15 LOG5 begin_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2008-Apr-27 18:35:15 INFO5 check_wapp_levels: WAPP power levels are between 1.188 and 1.488 (still bad) 2008-Apr-27 18:35:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 18:35:15 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Apr-27 18:35:15 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 18:35:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:35:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:35:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81316.00 2008-Apr-27 18:35:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 18:35:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:35:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:35:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-27 18:35:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:35:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-27 18:35:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-27 18:35:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-27 18:35:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-27 18:35:17 INFO5 check_wapp_levels: WAPP power levels are between 1.184 and 1.484 (still bad) 2008-Apr-27 18:35:19 INFO5 check_wapp_levels: WAPP power levels are between 1.184 and 1.484 (still bad) 2008-Apr-27 18:35:21 INFO5 check_wapp_levels: WAPP power levels are between 1.182 and 1.483 (still bad) 2008-Apr-27 18:35:23 INFO5 check_wapp_levels: WAPP power levels are between 1.181 and 1.483 (still bad) 2008-Apr-27 18:35:25 INFO5 check_wapp_levels: WAPP power levels are between 1.181 and 1.482 (still bad) 2008-Apr-27 18:35:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 18:35:26 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-27 18:35:26 LOG5 end_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2008-Apr-27 18:35:26 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-27 18:35:26 LOG5 end_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2008-Apr-27 18:35:26 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2008-Apr-27 18:35:26 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2008-Apr-27 18:35:26 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2008-Apr-27 18:35:26 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-27 18:35:26 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32519 J 2008-Apr-27 18:35:26 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.3 2008-Apr-27 18:35:26 LOG2 antvel: Parameters to Doppler: Topocentric 81326 2008 118 0.0 2008-Apr-27 18:35:26 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-27 18:35:26 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2008-Apr-27 18:35:26 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2008-Apr-27 18:35:26 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-27 18:35:26 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-27 18:35:26 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Apr-27 18:35:26 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 18:35:26 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-27 18:35:26 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-27 18:35:26 LOG5 begin_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2008-Apr-27 18:35:26 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-27 18:35:26 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.558780 2008.3251871498467 18.999933 2008-Apr-27 18:35:26 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333333 2008-Apr-27 18:35:26 LOG4 log_alfabeam: ALFABEAM 1 9.709428905650295 21.849949050647862 2008-Apr-27 18:35:26 LOG4 log_alfabeam: ALFABEAM 2 9.715147458676158 21.792708116067864 2008-Apr-27 18:35:26 LOG4 log_alfabeam: ALFABEAM 3 9.722392385757914 21.825703345011796 2008-Apr-27 18:35:26 LOG4 log_alfabeam: ALFABEAM 4 9.723904218860280 21.916852640670069 2008-Apr-27 18:35:26 LOG4 log_alfabeam: ALFABEAM 5 9.718153227245327 21.974231811978704 2008-Apr-27 18:35:26 LOG4 log_alfabeam: ALFABEAM 6 9.710923006609315 21.940323753062536 2008-Apr-27 18:35:26 INFO2 take_spectra: Starting WAPP+GALFA scan: 811800072 2008-Apr-27 18:35:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-27 18:35:27 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-27 18:35:27 LOG5 begin_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2008-Apr-27 18:35:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 18:35:27 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Apr-27 18:35:27 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 18:35:27 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:35:27 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:35:27 INFO5 check_wapp_levels: WAPP power levels are between 1.182 and 1.481 (still bad) 2008-Apr-27 18:35:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81328.00 2008-Apr-27 18:35:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 18:35:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:35:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:35:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-27 18:35:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:35:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-27 18:35:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-27 18:35:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-27 18:35:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-27 18:35:29 INFO5 check_wapp_levels: WAPP power levels are between 1.185 and 1.487 (still bad) 2008-Apr-27 18:35:31 INFO5 check_wapp_levels: WAPP power levels are between 1.184 and 1.486 (still bad) 2008-Apr-27 18:35:33 INFO5 check_wapp_levels: WAPP power levels are between 1.183 and 1.487 (still bad) 2008-Apr-27 18:35:35 INFO5 check_wapp_levels: WAPP power levels are between 1.181 and 1.487 (still bad) 2008-Apr-27 18:35:37 INFO5 check_wapp_levels: WAPP power levels are between 1.184 and 1.487 (still bad) 2008-Apr-27 18:35:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 18:35:38 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-27 18:35:38 LOG5 end_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2008-Apr-27 18:35:38 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-27 18:35:38 LOG5 end_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2008-Apr-27 18:35:38 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2008-Apr-27 18:35:38 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2008-Apr-27 18:35:38 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2008-Apr-27 18:35:38 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-27 18:35:38 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32519 J 2008-Apr-27 18:35:38 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.3 2008-Apr-27 18:35:38 LOG2 antvel: Parameters to Doppler: Topocentric 81338 2008 118 0.0 2008-Apr-27 18:35:38 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-27 18:35:38 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2008-Apr-27 18:35:38 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2008-Apr-27 18:35:38 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-27 18:35:38 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-27 18:35:38 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Apr-27 18:35:38 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 18:35:38 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-27 18:35:38 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-27 18:35:38 LOG5 begin_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2008-Apr-27 18:35:38 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-27 18:35:38 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.562123 2008.3251875301037 18.999933 2008-Apr-27 18:35:38 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333347 2008-Apr-27 18:35:38 LOG4 log_alfabeam: ALFABEAM 1 9.709430686861518 21.849874467756475 2008-Apr-27 18:35:38 LOG4 log_alfabeam: ALFABEAM 2 9.715152246066273 21.792692825337031 2008-Apr-27 18:35:38 LOG4 log_alfabeam: ALFABEAM 3 9.722395442387590 21.825761741827918 2008-Apr-27 18:35:38 LOG4 log_alfabeam: ALFABEAM 4 9.723902422872326 21.916927821606599 2008-Apr-27 18:35:38 LOG4 log_alfabeam: ALFABEAM 5 9.718148318588371 21.974247568358564 2008-Apr-27 18:35:38 LOG4 log_alfabeam: ALFABEAM 6 9.710919945342058 21.940263438140185 2008-Apr-27 18:35:38 INFO2 take_spectra: Starting WAPP+GALFA scan: 811800073 2008-Apr-27 18:35:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-27 18:35:39 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-27 18:35:39 LOG5 begin_task: Level: (4) ID = <10056> Status = 0 0 0 0 ok 2008-Apr-27 18:35:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 18:35:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Apr-27 18:35:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 18:35:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:35:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:35:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81340.00 2008-Apr-27 18:35:40 INFO5 check_wapp_levels: WAPP power levels are between 1.181 and 1.487 (still bad) 2008-Apr-27 18:35:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 18:35:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:35:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:35:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-27 18:35:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:35:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-27 18:35:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-27 18:35:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-27 18:35:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-27 18:35:42 INFO5 check_wapp_levels: WAPP power levels are between 1.183 and 1.489 (still bad) 2008-Apr-27 18:35:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.488 > 1.4)! 2008-Apr-27 18:35:44 LOG4 check_wapp_levels: WAPP-1 power levels: 1.271 1.333 1.238 1.254 2008-Apr-27 18:35:44 LOG4 check_wapp_levels: WAPP-2 power levels: 1.183 1.420 1.463 1.254 2008-Apr-27 18:35:44 LOG4 check_wapp_levels: WAPP-3 power levels: 1.407 1.462 1.209 1.292 2008-Apr-27 18:35:44 LOG4 check_wapp_levels: WAPP-4 power levels: 1.488 1.216 1.299 1.361 2008-Apr-27 18:35:46 INFO5 check_wapp_levels: WAPP power levels are between 1.183 and 1.489 (still bad) 2008-Apr-27 18:35:48 INFO5 check_wapp_levels: WAPP power levels are between 1.184 and 1.488 (still bad) 2008-Apr-27 18:35:50 INFO5 check_wapp_levels: WAPP power levels are between 1.183 and 1.489 (still bad) 2008-Apr-27 18:35:50 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 18:35:50 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-27 18:35:50 LOG5 end_task: Level: (4) ID = <10056> Status = 0 0 0 0 ok 2008-Apr-27 18:35:50 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-27 18:35:50 LOG5 end_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2008-Apr-27 18:35:50 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2008-Apr-27 18:35:50 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2008-Apr-27 18:35:50 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2008-Apr-27 18:35:50 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-27 18:35:50 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32519 J 2008-Apr-27 18:35:50 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.3 2008-Apr-27 18:35:50 LOG2 antvel: Parameters to Doppler: Topocentric 81350 2008 118 0.0 2008-Apr-27 18:35:50 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-27 18:35:50 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2008-Apr-27 18:35:50 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2008-Apr-27 18:35:50 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-27 18:35:50 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-27 18:35:50 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Apr-27 18:35:50 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 18:35:50 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-27 18:35:50 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-27 18:35:50 LOG5 begin_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2008-Apr-27 18:35:50 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-27 18:35:50 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.565465 2008.3251879103607 18.999933 2008-Apr-27 18:35:50 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666665 21.883333333333347 2008-Apr-27 18:35:50 LOG4 log_alfabeam: ALFABEAM 1 9.709432479210033 21.849799604090421 2008-Apr-27 18:35:50 LOG4 log_alfabeam: ALFABEAM 2 9.715157053436096 21.792677522887676 2008-Apr-27 18:35:50 LOG4 log_alfabeam: ALFABEAM 3 9.722398508187124 21.825820403997316 2008-Apr-27 18:35:50 LOG4 log_alfabeam: ALFABEAM 4 9.723900615607999 21.917003286007095 2008-Apr-27 18:35:50 LOG4 log_alfabeam: ALFABEAM 5 9.718143389300852 21.974263336753250 2008-Apr-27 18:35:50 LOG4 log_alfabeam: ALFABEAM 6 9.710916875054687 21.940202848119092 2008-Apr-27 18:35:50 INFO2 take_spectra: Starting WAPP+GALFA scan: 811800074 2008-Apr-27 18:35:51 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-27 18:35:51 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-27 18:35:51 LOG5 begin_task: Level: (4) ID = <10058> Status = 0 0 0 0 ok 2008-Apr-27 18:35:51 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 18:35:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Apr-27 18:35:51 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 18:35:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:35:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:35:51 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81352.00 2008-Apr-27 18:35:52 INFO5 check_wapp_levels: WAPP power levels are between 1.183 and 1.487 (still bad) 2008-Apr-27 18:35:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 18:35:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:35:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:35:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-27 18:35:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:35:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-27 18:35:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-27 18:35:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-27 18:35:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-27 18:35:54 INFO5 check_wapp_levels: WAPP power levels are between 1.184 and 1.496 (still bad) 2008-Apr-27 18:35:56 INFO5 check_wapp_levels: WAPP power levels are between 1.185 and 1.497 (still bad) 2008-Apr-27 18:35:58 INFO5 check_wapp_levels: WAPP power levels are between 1.182 and 1.496 (still bad) 2008-Apr-27 18:36:00 INFO5 check_wapp_levels: WAPP power levels are between 1.182 and 1.496 (still bad) 2008-Apr-27 18:36:02 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 18:36:02 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-27 18:36:02 LOG5 end_task: Level: (4) ID = <10058> Status = 0 0 0 0 ok 2008-Apr-27 18:36:02 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-27 18:36:02 LOG5 end_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2008-Apr-27 18:36:02 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2008-Apr-27 18:36:02 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2008-Apr-27 18:36:02 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2008-Apr-27 18:36:02 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-27 18:36:02 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-27 18:36:02 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-27 18:36:02 LOG5 begin_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2008-Apr-27 18:36:02 INFO5 check_wapp_levels: WAPP power levels are between 1.182 and 1.496 (still bad) 2008-Apr-27 18:36:02 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-27 18:36:02 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-27 18:36:02 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-27 18:36:02 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-27 18:36:02 LOG5 end_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2008-Apr-27 18:36:02 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2008-Apr-27 18:36:02 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2008-Apr-27 18:36:02 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2008-Apr-27 18:36:02 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2008-Apr-27 18:36:02 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-27 18:36:02 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32519 J 2008-Apr-27 18:36:02 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.3 2008-Apr-27 18:36:02 LOG2 antvel: Parameters to Doppler: Topocentric 81362 2008 118 0.0 2008-Apr-27 18:36:02 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-27 18:36:02 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2008-Apr-27 18:36:02 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2008-Apr-27 18:36:02 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-27 18:36:02 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-27 18:36:02 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Apr-27 18:36:02 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 18:36:02 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-27 18:36:02 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-27 18:36:02 LOG5 begin_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2008-Apr-27 18:36:02 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-27 18:36:02 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.568807 2008.3251882906179 18.999933 2008-Apr-27 18:36:02 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333329 2008-Apr-27 18:36:02 LOG4 log_alfabeam: ALFABEAM 1 9.709434283340983 21.849724435019201 2008-Apr-27 18:36:02 LOG4 log_alfabeam: ALFABEAM 2 9.715161882391957 21.792662204255777 2008-Apr-27 18:36:02 LOG4 log_alfabeam: ALFABEAM 3 9.722401584136062 21.825879351394171 2008-Apr-27 18:36:02 LOG4 log_alfabeam: ALFABEAM 4 9.723898796416155 21.917079058700420 2008-Apr-27 18:36:02 LOG4 log_alfabeam: ALFABEAM 5 9.718138437734519 21.974279121753060 2008-Apr-27 18:36:02 LOG4 log_alfabeam: ALFABEAM 6 9.710913794768810 21.940141962470591 2008-Apr-27 18:36:02 INFO2 take_spectra: Starting WAPP+GALFA scan: 811800075 2008-Apr-27 18:36:03 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-27 18:36:03 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-27 18:36:03 LOG5 begin_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2008-Apr-27 18:36:03 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 18:36:03 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Apr-27 18:36:03 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 18:36:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:36:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:36:03 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81364.00 2008-Apr-27 18:36:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 18:36:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:36:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:36:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-27 18:36:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:36:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-27 18:36:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-27 18:36:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-27 18:36:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-27 18:36:05 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.896 and 1.147 2008-Apr-27 18:36:14 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 18:36:14 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-27 18:36:14 LOG5 end_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2008-Apr-27 18:36:14 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-27 18:36:14 LOG5 end_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2008-Apr-27 18:36:14 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2008-Apr-27 18:36:14 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2008-Apr-27 18:36:14 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2008-Apr-27 18:36:14 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-27 18:36:14 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32519 J 2008-Apr-27 18:36:14 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.3 2008-Apr-27 18:36:14 LOG2 antvel: Parameters to Doppler: Topocentric 81374 2008 118 0.0 2008-Apr-27 18:36:14 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-27 18:36:14 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2008-Apr-27 18:36:14 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2008-Apr-27 18:36:14 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-27 18:36:14 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-27 18:36:14 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Apr-27 18:36:14 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 18:36:14 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-27 18:36:14 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-27 18:36:14 LOG5 begin_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2008-Apr-27 18:36:14 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-27 18:36:14 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.572150 2008.3251886708749 18.999933 2008-Apr-27 18:36:14 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333336 2008-Apr-27 18:36:14 LOG4 log_alfabeam: ALFABEAM 1 9.709436099915083 21.849648935523188 2008-Apr-27 18:36:14 LOG4 log_alfabeam: ALFABEAM 2 9.715166734567923 21.792646864962229 2008-Apr-27 18:36:14 LOG4 log_alfabeam: ALFABEAM 3 9.722404671226606 21.825938604261857 2008-Apr-27 18:36:14 LOG4 log_alfabeam: ALFABEAM 4 9.723896964629933 21.917155164908348 2008-Apr-27 18:36:14 LOG4 log_alfabeam: ALFABEAM 5 9.718133462212489 21.974294927963641 2008-Apr-27 18:36:14 LOG4 log_alfabeam: ALFABEAM 6 9.710910703493605 21.940080760283681 2008-Apr-27 18:36:14 INFO2 take_spectra: Starting WAPP+GALFA scan: 811800076 2008-Apr-27 18:36:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-27 18:36:15 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-27 18:36:15 LOG5 begin_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2008-Apr-27 18:36:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 18:36:15 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Apr-27 18:36:15 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 18:36:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:36:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:36:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81376.00 2008-Apr-27 18:36:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 18:36:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:36:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:36:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-27 18:36:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:36:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-27 18:36:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-27 18:36:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-27 18:36:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-27 18:36:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 18:36:26 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-27 18:36:26 LOG5 end_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2008-Apr-27 18:36:26 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-27 18:36:26 LOG5 end_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2008-Apr-27 18:36:26 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2008-Apr-27 18:36:26 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2008-Apr-27 18:36:26 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2008-Apr-27 18:36:26 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-27 18:36:26 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32519 J 2008-Apr-27 18:36:26 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.3 2008-Apr-27 18:36:26 LOG2 antvel: Parameters to Doppler: Topocentric 81386 2008 118 0.0 2008-Apr-27 18:36:26 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-27 18:36:26 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2008-Apr-27 18:36:26 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2008-Apr-27 18:36:26 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-27 18:36:26 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-27 18:36:26 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Apr-27 18:36:26 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 18:36:26 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-27 18:36:26 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-27 18:36:26 LOG5 begin_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2008-Apr-27 18:36:26 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-27 18:36:26 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.575492 2008.3251890511319 18.999933 2008-Apr-27 18:36:26 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666665 21.883333333333322 2008-Apr-27 18:36:26 LOG4 log_alfabeam: ALFABEAM 1 9.709437927962533 21.849573148357500 2008-Apr-27 18:36:26 LOG4 log_alfabeam: ALFABEAM 2 9.715171607242448 21.792631514299980 2008-Apr-27 18:36:26 LOG4 log_alfabeam: ALFABEAM 3 9.722407767679606 21.825998129655623 2008-Apr-27 18:36:26 LOG4 log_alfabeam: ALFABEAM 4 9.723895121226583 21.917231561532994 2008-Apr-27 18:36:26 LOG4 log_alfabeam: ALFABEAM 5 9.718128465524220 21.974310745799059 2008-Apr-27 18:36:26 LOG4 log_alfabeam: ALFABEAM 6 9.710907603013363 21.940019275585399 2008-Apr-27 18:36:26 INFO2 take_spectra: Starting WAPP+GALFA scan: 811800077 2008-Apr-27 18:36:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-27 18:36:27 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-27 18:36:27 LOG5 begin_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2008-Apr-27 18:36:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 18:36:27 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Apr-27 18:36:27 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 18:36:27 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:36:27 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:36:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81388.00 2008-Apr-27 18:36:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 18:36:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:36:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:36:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-27 18:36:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:36:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-27 18:36:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-27 18:36:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-27 18:36:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-27 18:36:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 18:36:38 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-27 18:36:38 LOG5 end_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2008-Apr-27 18:36:38 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-27 18:36:38 LOG5 end_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2008-Apr-27 18:36:38 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2008-Apr-27 18:36:38 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2008-Apr-27 18:36:38 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2008-Apr-27 18:36:38 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-27 18:36:38 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32519 J 2008-Apr-27 18:36:38 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.3 2008-Apr-27 18:36:38 LOG2 antvel: Parameters to Doppler: Topocentric 81398 2008 118 0.0 2008-Apr-27 18:36:38 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-27 18:36:38 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2008-Apr-27 18:36:38 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2008-Apr-27 18:36:38 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-27 18:36:38 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-27 18:36:38 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Apr-27 18:36:38 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 18:36:38 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-27 18:36:38 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-27 18:36:38 LOG5 begin_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2008-Apr-27 18:36:38 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-27 18:36:38 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.578835 2008.3251894313889 18.999933 2008-Apr-27 18:36:38 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666663 21.883333333333333 2008-Apr-27 18:36:38 LOG4 log_alfabeam: ALFABEAM 1 9.709439768695880 21.849497025729129 2008-Apr-27 18:36:38 LOG4 log_alfabeam: ALFABEAM 2 9.715176503514925 21.792616143203137 2008-Apr-27 18:36:38 LOG4 log_alfabeam: ALFABEAM 3 9.722410875416392 21.826057965731856 2008-Apr-27 18:36:38 LOG4 log_alfabeam: ALFABEAM 4 9.723893264982747 21.917308296752676 2008-Apr-27 18:36:38 LOG4 log_alfabeam: ALFABEAM 5 9.718123444490157 21.974326584591008 2008-Apr-27 18:36:38 LOG4 log_alfabeam: ALFABEAM 6 9.710904491407035 21.939957468962181 2008-Apr-27 18:36:38 INFO2 take_spectra: Starting WAPP+GALFA scan: 811800078 2008-Apr-27 18:36:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-27 18:36:39 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-27 18:36:39 LOG5 begin_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2008-Apr-27 18:36:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 18:36:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Apr-27 18:36:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 18:36:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:36:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:36:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81400.00 2008-Apr-27 18:36:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 18:36:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:36:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:36:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-27 18:36:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:36:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-27 18:36:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-27 18:36:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-27 18:36:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-27 18:36:50 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 18:36:50 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-27 18:36:50 LOG5 end_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2008-Apr-27 18:36:50 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-27 18:36:50 LOG5 end_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2008-Apr-27 18:36:50 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2008-Apr-27 18:36:50 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2008-Apr-27 18:36:50 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2008-Apr-27 18:36:50 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-27 18:36:50 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32519 J 2008-Apr-27 18:36:50 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.3 2008-Apr-27 18:36:50 LOG2 antvel: Parameters to Doppler: Topocentric 81410 2008 118 0.0 2008-Apr-27 18:36:50 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-27 18:36:50 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2008-Apr-27 18:36:50 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2008-Apr-27 18:36:50 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-27 18:36:50 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-27 18:36:50 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Apr-27 18:36:50 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 18:36:50 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-27 18:36:50 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-27 18:36:50 LOG5 begin_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2008-Apr-27 18:36:50 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-27 18:36:50 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.582177 2008.3251898116459 18.999933 2008-Apr-27 18:36:50 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666670 21.883333333333347 2008-Apr-27 18:36:50 LOG4 log_alfabeam: ALFABEAM 1 9.709441621133889 21.849420610717296 2008-Apr-27 18:36:50 LOG4 log_alfabeam: ALFABEAM 2 9.715181420641366 21.792600760992606 2008-Apr-27 18:36:50 LOG4 log_alfabeam: ALFABEAM 3 9.722413992646491 21.826118079254140 2008-Apr-27 18:36:50 LOG4 log_alfabeam: ALFABEAM 4 9.723891396887272 21.917385327142256 2008-Apr-27 18:36:50 LOG4 log_alfabeam: ALFABEAM 5 9.718118401922924 21.974342434724353 2008-Apr-27 18:36:50 LOG4 log_alfabeam: ALFABEAM 6 9.710901370470156 21.939895374743646 2008-Apr-27 18:36:50 INFO2 take_spectra: Starting WAPP+GALFA scan: 811800079 2008-Apr-27 18:36:51 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-27 18:36:51 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-27 18:36:51 LOG5 begin_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2008-Apr-27 18:36:51 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 18:36:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Apr-27 18:36:51 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 18:36:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:36:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:36:51 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81412.00 2008-Apr-27 18:36:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 18:36:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:36:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:36:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-27 18:36:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:36:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-27 18:36:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-27 18:36:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-27 18:36:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-27 18:37:02 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 18:37:02 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-27 18:37:02 LOG5 end_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2008-Apr-27 18:37:02 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-27 18:37:02 LOG5 end_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2008-Apr-27 18:37:02 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2008-Apr-27 18:37:02 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2008-Apr-27 18:37:02 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2008-Apr-27 18:37:02 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-27 18:37:02 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32519 J 2008-Apr-27 18:37:02 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.3 2008-Apr-27 18:37:02 LOG2 antvel: Parameters to Doppler: Topocentric 81422 2008 118 0.0 2008-Apr-27 18:37:02 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-27 18:37:02 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2008-Apr-27 18:37:02 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2008-Apr-27 18:37:02 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-27 18:37:02 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-27 18:37:02 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Apr-27 18:37:02 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 18:37:02 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-27 18:37:02 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-27 18:37:02 LOG5 begin_task: Level: (3) ID = <10070> Status = 0 0 0 0 ok 2008-Apr-27 18:37:02 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-27 18:37:02 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.585520 2008.3251901919032 18.999933 2008-Apr-27 18:37:02 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333336 2008-Apr-27 18:37:02 LOG4 log_alfabeam: ALFABEAM 1 9.709443486506748 21.849343855103900 2008-Apr-27 18:37:02 LOG4 log_alfabeam: ALFABEAM 2 9.715186361751778 21.792585358592685 2008-Apr-27 18:37:02 LOG4 log_alfabeam: ALFABEAM 3 9.722417121304707 21.826178508788910 2008-Apr-27 18:37:02 LOG4 log_alfabeam: ALFABEAM 4 9.723889515698902 21.917462701308974 2008-Apr-27 18:37:02 LOG4 log_alfabeam: ALFABEAM 5 9.718113334611370 21.974358305540260 2008-Apr-27 18:37:02 LOG4 log_alfabeam: ALFABEAM 6 9.710898238268468 21.939832953091631 2008-Apr-27 18:37:02 INFO2 take_spectra: Starting WAPP+GALFA scan: 811800080 2008-Apr-27 18:37:03 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-27 18:37:03 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-27 18:37:03 LOG5 begin_task: Level: (4) ID = <10071> Status = 0 0 0 0 ok 2008-Apr-27 18:37:03 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 18:37:03 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Apr-27 18:37:03 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 18:37:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:37:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:37:03 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81424.00 2008-Apr-27 18:37:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 18:37:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:37:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:37:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-27 18:37:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:37:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-27 18:37:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-27 18:37:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-27 18:37:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-27 18:37:14 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 18:37:14 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-27 18:37:14 LOG5 end_task: Level: (4) ID = <10071> Status = 0 0 0 0 ok 2008-Apr-27 18:37:14 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-27 18:37:14 LOG5 end_task: Level: (3) ID = <10070> Status = 0 0 0 0 ok 2008-Apr-27 18:37:14 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2008-Apr-27 18:37:14 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2008-Apr-27 18:37:14 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2008-Apr-27 18:37:14 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-27 18:37:14 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32519 J 2008-Apr-27 18:37:14 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.3 2008-Apr-27 18:37:14 LOG2 antvel: Parameters to Doppler: Topocentric 81434 2008 118 0.0 2008-Apr-27 18:37:14 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-27 18:37:14 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2008-Apr-27 18:37:14 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2008-Apr-27 18:37:14 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-27 18:37:14 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-27 18:37:14 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Apr-27 18:37:14 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 18:37:14 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-27 18:37:14 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-27 18:37:14 LOG5 begin_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2008-Apr-27 18:37:14 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-27 18:37:14 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.588862 2008.3251905721602 18.999933 2008-Apr-27 18:37:14 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666663 21.883333333333336 2008-Apr-27 18:37:14 LOG4 log_alfabeam: ALFABEAM 1 9.709445363821569 21.849266802297016 2008-Apr-27 18:37:14 LOG4 log_alfabeam: ALFABEAM 2 9.715191324079393 21.792569945352483 2008-Apr-27 18:37:14 LOG4 log_alfabeam: ALFABEAM 3 9.722420259589088 21.826239220803668 2008-Apr-27 18:37:14 LOG4 log_alfabeam: ALFABEAM 4 9.723887622418255 21.917540375495644 2008-Apr-27 18:37:14 LOG4 log_alfabeam: ALFABEAM 5 9.718108245391603 21.974374187394389 2008-Apr-27 18:37:14 LOG4 log_alfabeam: ALFABEAM 6 9.710895096608878 21.939770238643046 2008-Apr-27 18:37:14 INFO2 take_spectra: Starting WAPP+GALFA scan: 811800081 2008-Apr-27 18:37:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-27 18:37:15 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-27 18:37:15 LOG5 begin_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2008-Apr-27 18:37:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 18:37:15 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Apr-27 18:37:15 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 18:37:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:37:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:37:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81436.00 2008-Apr-27 18:37:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 18:37:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:37:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:37:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-27 18:37:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:37:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-27 18:37:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-27 18:37:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-27 18:37:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-27 18:37:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 18:37:26 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-27 18:37:26 LOG5 end_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2008-Apr-27 18:37:26 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-27 18:37:26 LOG5 end_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2008-Apr-27 18:37:26 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2008-Apr-27 18:37:26 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-27 18:37:26 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-27 18:37:26 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-27 18:37:26 LOG5 begin_task: Level: (3) ID = <10074> Status = 0 0 0 0 ok 2008-Apr-27 18:37:26 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-27 18:37:26 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-27 18:37:26 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-27 18:37:26 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-27 18:37:26 LOG5 end_task: Level: (3) ID = <10074> Status = 0 0 0 0 ok 2008-Apr-27 18:37:26 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2008-Apr-27 18:37:26 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2008-Apr-27 18:37:26 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2008-Apr-27 18:37:26 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-27 18:37:26 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32519 J 2008-Apr-27 18:37:26 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.3 2008-Apr-27 18:37:26 LOG2 antvel: Parameters to Doppler: Topocentric 81446 2008 118 0.0 2008-Apr-27 18:37:26 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-27 18:37:26 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2008-Apr-27 18:37:26 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2008-Apr-27 18:37:26 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-27 18:37:26 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-27 18:37:26 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Apr-27 18:37:26 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 18:37:26 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-27 18:37:26 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-27 18:37:26 LOG5 begin_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2008-Apr-27 18:37:26 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-27 18:37:26 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.592205 2008.3251909524172 18.999933 2008-Apr-27 18:37:26 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333329 2008-Apr-27 18:37:26 LOG4 log_alfabeam: ALFABEAM 1 9.709447254326587 21.849189403646303 2008-Apr-27 18:37:26 LOG4 log_alfabeam: ALFABEAM 2 9.715196310785393 21.792554512187241 2008-Apr-27 18:37:26 LOG4 log_alfabeam: ALFABEAM 3 9.722423409448105 21.826300254282692 2008-Apr-27 18:37:26 LOG4 log_alfabeam: ALFABEAM 4 9.723885715785846 21.917618398745674 2008-Apr-27 18:37:26 LOG4 log_alfabeam: ALFABEAM 5 9.718103131020335 21.974390089636540 2008-Apr-27 18:37:26 LOG4 log_alfabeam: ALFABEAM 6 9.710891943543775 21.939707191127056 2008-Apr-27 18:37:26 INFO2 take_spectra: Starting WAPP+GALFA scan: 811800082 2008-Apr-27 18:37:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-27 18:37:27 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-27 18:37:27 LOG5 begin_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2008-Apr-27 18:37:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 18:37:27 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Apr-27 18:37:27 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 18:37:27 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:37:27 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:37:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81448.00 2008-Apr-27 18:37:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 18:37:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:37:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:37:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-27 18:37:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:37:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-27 18:37:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-27 18:37:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-27 18:37:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-27 18:37:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.544 > 1.4)! 2008-Apr-27 18:37:29 LOG4 check_wapp_levels: WAPP-1 power levels: 1.319 1.347 1.297 1.264 2008-Apr-27 18:37:29 LOG4 check_wapp_levels: WAPP-2 power levels: 1.193 1.453 1.544 1.272 2008-Apr-27 18:37:29 LOG4 check_wapp_levels: WAPP-3 power levels: 1.463 1.483 1.284 1.334 2008-Apr-27 18:37:29 LOG4 check_wapp_levels: WAPP-4 power levels: 1.514 1.222 1.321 1.363 2008-Apr-27 18:37:31 INFO5 check_wapp_levels: WAPP power levels are between 1.192 and 1.545 (still bad) 2008-Apr-27 18:37:33 INFO5 check_wapp_levels: WAPP power levels are between 1.192 and 1.546 (still bad) 2008-Apr-27 18:37:35 INFO5 check_wapp_levels: WAPP power levels are between 1.192 and 1.544 (still bad) 2008-Apr-27 18:37:37 INFO5 check_wapp_levels: WAPP power levels are between 1.193 and 1.545 (still bad) 2008-Apr-27 18:37:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 18:37:38 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-27 18:37:38 LOG5 end_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2008-Apr-27 18:37:38 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-27 18:37:38 LOG5 end_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2008-Apr-27 18:37:38 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2008-Apr-27 18:37:38 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2008-Apr-27 18:37:38 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2008-Apr-27 18:37:38 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-27 18:37:38 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32519 J 2008-Apr-27 18:37:38 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.3 2008-Apr-27 18:37:38 LOG2 antvel: Parameters to Doppler: Topocentric 81458 2008 118 0.0 2008-Apr-27 18:37:38 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-27 18:37:38 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2008-Apr-27 18:37:38 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2008-Apr-27 18:37:38 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-27 18:37:38 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-27 18:37:38 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Apr-27 18:37:38 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 18:37:38 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-27 18:37:38 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-27 18:37:38 LOG5 begin_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2008-Apr-27 18:37:38 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-27 18:37:38 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.595547 2008.3251913326742 18.999933 2008-Apr-27 18:37:38 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666670 21.883333333333333 2008-Apr-27 18:37:38 LOG4 log_alfabeam: ALFABEAM 1 9.709449157017092 21.849111702893467 2008-Apr-27 18:37:38 LOG4 log_alfabeam: ALFABEAM 2 9.715201319079892 21.792539068474262 2008-Apr-27 18:37:38 LOG4 log_alfabeam: ALFABEAM 3 9.722426569068180 21.826361575392777 2008-Apr-27 18:37:38 LOG4 log_alfabeam: ALFABEAM 4 9.723883796814254 21.917696726965026 2008-Apr-27 18:37:38 LOG4 log_alfabeam: ALFABEAM 5 9.718097994357539 21.974406002593071 2008-Apr-27 18:37:38 LOG4 log_alfabeam: ALFABEAM 6 9.710888780891590 21.939643845492672 2008-Apr-27 18:37:38 INFO2 take_spectra: Starting WAPP+GALFA scan: 811800083 2008-Apr-27 18:37:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-27 18:37:39 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-27 18:37:39 LOG5 begin_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2008-Apr-27 18:37:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 18:37:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Apr-27 18:37:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 18:37:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:37:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:37:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81460.00 2008-Apr-27 18:37:40 INFO5 check_wapp_levels: WAPP power levels are between 1.191 and 1.541 (still bad) 2008-Apr-27 18:37:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 18:37:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:37:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:37:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-27 18:37:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:37:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-27 18:37:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-27 18:37:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-27 18:37:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-27 18:37:42 INFO5 check_wapp_levels: WAPP power levels are between 1.171 and 1.475 (still bad) 2008-Apr-27 18:37:44 INFO5 check_wapp_levels: WAPP power levels are between 1.175 and 1.475 (still bad) 2008-Apr-27 18:37:46 INFO5 check_wapp_levels: WAPP power levels are between 1.176 and 1.477 (still bad) 2008-Apr-27 18:37:48 INFO5 check_wapp_levels: WAPP power levels are between 1.174 and 1.475 (still bad) 2008-Apr-27 18:37:50 INFO5 check_wapp_levels: WAPP power levels are between 1.174 and 1.475 (still bad) 2008-Apr-27 18:37:50 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 18:37:50 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-27 18:37:50 LOG5 end_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2008-Apr-27 18:37:50 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-27 18:37:50 LOG5 end_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2008-Apr-27 18:37:50 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2008-Apr-27 18:37:50 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2008-Apr-27 18:37:50 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2008-Apr-27 18:37:50 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-27 18:37:50 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32519 J 2008-Apr-27 18:37:50 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.3 2008-Apr-27 18:37:50 LOG2 antvel: Parameters to Doppler: Topocentric 81470 2008 118 0.0 2008-Apr-27 18:37:50 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-27 18:37:50 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2008-Apr-27 18:37:50 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2008-Apr-27 18:37:50 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-27 18:37:50 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-27 18:37:50 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Apr-27 18:37:50 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 18:37:50 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-27 18:37:50 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-27 18:37:50 LOG5 begin_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2008-Apr-27 18:37:50 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-27 18:37:50 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.598890 2008.3251917129314 18.999933 2008-Apr-27 18:37:50 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333347 2008-Apr-27 18:37:50 LOG4 log_alfabeam: ALFABEAM 1 9.709451073159725 21.849033650948670 2008-Apr-27 18:37:50 LOG4 log_alfabeam: ALFABEAM 2 9.715206352155800 21.792523605120618 2008-Apr-27 18:37:50 LOG4 log_alfabeam: ALFABEAM 3 9.722429740411599 21.826423223544136 2008-Apr-27 18:37:50 LOG4 log_alfabeam: ALFABEAM 4 9.723881864225309 21.917775409640598 2008-Apr-27 18:37:50 LOG4 log_alfabeam: ALFABEAM 5 9.718092832127143 21.974421935621560 2008-Apr-27 18:37:50 LOG4 log_alfabeam: ALFABEAM 6 9.710885606691184 21.939580161028076 2008-Apr-27 18:37:50 INFO2 take_spectra: Starting WAPP+GALFA scan: 811800084 2008-Apr-27 18:37:51 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-27 18:37:51 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-27 18:37:51 LOG5 begin_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2008-Apr-27 18:37:51 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 18:37:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Apr-27 18:37:51 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 18:37:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:37:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:37:51 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81472.00 2008-Apr-27 18:37:52 INFO5 check_wapp_levels: WAPP power levels are between 1.173 and 1.476 (still bad) 2008-Apr-27 18:37:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 18:37:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:37:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:37:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-27 18:37:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:37:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-27 18:37:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-27 18:37:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-27 18:37:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-27 18:37:54 INFO5 check_wapp_levels: WAPP power levels are between 1.170 and 1.473 (still bad) 2008-Apr-27 18:37:56 INFO5 check_wapp_levels: WAPP power levels are between 1.171 and 1.472 (still bad) 2008-Apr-27 18:37:58 INFO5 check_wapp_levels: WAPP power levels are between 1.170 and 1.472 (still bad) 2008-Apr-27 18:38:00 INFO5 check_wapp_levels: WAPP power levels are between 1.172 and 1.472 (still bad) 2008-Apr-27 18:38:02 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 18:38:02 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-27 18:38:02 LOG5 end_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2008-Apr-27 18:38:02 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-27 18:38:02 LOG5 end_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2008-Apr-27 18:38:02 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2008-Apr-27 18:38:02 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2008-Apr-27 18:38:02 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2008-Apr-27 18:38:02 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-27 18:38:02 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32519 J 2008-Apr-27 18:38:02 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.3 2008-Apr-27 18:38:02 LOG2 antvel: Parameters to Doppler: Topocentric 81482 2008 118 0.0 2008-Apr-27 18:38:02 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-27 18:38:02 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2008-Apr-27 18:38:02 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2008-Apr-27 18:38:02 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-27 18:38:02 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-27 18:38:02 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Apr-27 18:38:02 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 18:38:02 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-27 18:38:02 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-27 18:38:02 LOG5 begin_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2008-Apr-27 18:38:02 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-27 18:38:02 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.602232 2008.3251920931884 18.999933 2008-Apr-27 18:38:02 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333336 2008-Apr-27 18:38:02 LOG4 log_alfabeam: ALFABEAM 1 9.709453001737744 21.848955291891997 2008-Apr-27 18:38:02 LOG4 log_alfabeam: ALFABEAM 2 9.715211407199767 21.792508131531910 2008-Apr-27 18:38:02 LOG4 log_alfabeam: ALFABEAM 3 9.722432921653015 21.826485164598040 2008-Apr-27 18:38:02 LOG4 log_alfabeam: ALFABEAM 4 9.723879919043803 21.917854402336584 2008-Apr-27 18:38:02 LOG4 log_alfabeam: ALFABEAM 5 9.718087647213359 21.974437879018819 2008-Apr-27 18:38:02 LOG4 log_alfabeam: ALFABEAM 6 9.710882422772647 21.939516172999209 2008-Apr-27 18:38:02 INFO2 take_spectra: Starting WAPP+GALFA scan: 811800085 2008-Apr-27 18:38:03 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-27 18:38:03 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-27 18:38:03 LOG5 begin_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2008-Apr-27 18:38:03 INFO5 check_wapp_levels: WAPP power levels are between 1.172 and 1.472 (still bad) 2008-Apr-27 18:38:03 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 18:38:03 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Apr-27 18:38:03 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 18:38:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:38:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:38:03 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81484.00 2008-Apr-27 18:38:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 18:38:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:38:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:38:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-27 18:38:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:38:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-27 18:38:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-27 18:38:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-27 18:38:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-27 18:38:05 INFO5 check_wapp_levels: WAPP power levels are between 1.171 and 1.470 (still bad) 2008-Apr-27 18:38:07 INFO5 check_wapp_levels: WAPP power levels are between 1.168 and 1.468 (still bad) 2008-Apr-27 18:38:09 INFO5 check_wapp_levels: WAPP power levels are between 1.167 and 1.468 (still bad) 2008-Apr-27 18:38:11 INFO5 check_wapp_levels: WAPP power levels are between 1.166 and 1.468 (still bad) 2008-Apr-27 18:38:13 INFO5 check_wapp_levels: WAPP power levels are between 1.167 and 1.468 (still bad) 2008-Apr-27 18:38:14 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 18:38:14 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-27 18:38:14 LOG5 end_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2008-Apr-27 18:38:14 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-27 18:38:14 LOG5 end_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2008-Apr-27 18:38:14 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2008-Apr-27 18:38:14 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2008-Apr-27 18:38:14 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2008-Apr-27 18:38:14 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-27 18:38:14 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32519 J 2008-Apr-27 18:38:14 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.3 2008-Apr-27 18:38:14 LOG2 antvel: Parameters to Doppler: Topocentric 81494 2008 118 0.0 2008-Apr-27 18:38:14 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-27 18:38:14 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2008-Apr-27 18:38:14 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2008-Apr-27 18:38:14 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-27 18:38:14 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-27 18:38:14 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Apr-27 18:38:14 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 18:38:14 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-27 18:38:14 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-27 18:38:14 LOG5 begin_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2008-Apr-27 18:38:14 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-27 18:38:14 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.605574 2008.3251924734454 18.999933 2008-Apr-27 18:38:14 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666670 21.883333333333329 2008-Apr-27 18:38:14 LOG4 log_alfabeam: ALFABEAM 1 9.709454943453640 21.848876599783221 2008-Apr-27 18:38:14 LOG4 log_alfabeam: ALFABEAM 2 9.715216485913775 21.792492643244451 2008-Apr-27 18:38:14 LOG4 log_alfabeam: ALFABEAM 3 9.722436113811927 21.826547419723507 2008-Apr-27 18:38:14 LOG4 log_alfabeam: ALFABEAM 4 9.723877960560484 21.917933731203345 2008-Apr-27 18:38:14 LOG4 log_alfabeam: ALFABEAM 5 9.718082437869199 21.974453837372067 2008-Apr-27 18:38:14 LOG4 log_alfabeam: ALFABEAM 6 9.710879228118657 21.939451859537790 2008-Apr-27 18:38:14 INFO2 take_spectra: Starting WAPP+GALFA scan: 811800086 2008-Apr-27 18:38:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-27 18:38:15 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-27 18:38:15 LOG5 begin_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2008-Apr-27 18:38:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 18:38:15 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Apr-27 18:38:15 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 18:38:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:38:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:38:15 INFO5 check_wapp_levels: WAPP power levels are between 1.168 and 1.468 (still bad) 2008-Apr-27 18:38:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81496.00 2008-Apr-27 18:38:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 18:38:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:38:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:38:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-27 18:38:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:38:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-27 18:38:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-27 18:38:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-27 18:38:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-27 18:38:17 INFO5 check_wapp_levels: WAPP power levels are between 1.168 and 1.468 (still bad) 2008-Apr-27 18:38:19 INFO5 check_wapp_levels: WAPP power levels are between 1.165 and 1.472 (still bad) 2008-Apr-27 18:38:21 INFO5 check_wapp_levels: WAPP power levels are between 1.167 and 1.472 (still bad) 2008-Apr-27 18:38:23 INFO5 check_wapp_levels: WAPP power levels are between 1.167 and 1.473 (still bad) 2008-Apr-27 18:38:25 INFO5 check_wapp_levels: WAPP power levels are between 1.166 and 1.473 (still bad) 2008-Apr-27 18:38:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 18:38:26 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-27 18:38:26 LOG5 end_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2008-Apr-27 18:38:26 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-27 18:38:26 LOG5 end_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2008-Apr-27 18:38:26 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2008-Apr-27 18:38:26 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2008-Apr-27 18:38:26 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2008-Apr-27 18:38:26 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-27 18:38:26 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32519 J 2008-Apr-27 18:38:26 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.3 2008-Apr-27 18:38:26 LOG2 antvel: Parameters to Doppler: Topocentric 81506 2008 118 0.0 2008-Apr-27 18:38:26 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-27 18:38:26 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2008-Apr-27 18:38:26 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2008-Apr-27 18:38:26 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-27 18:38:26 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-27 18:38:26 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Apr-27 18:38:26 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 18:38:26 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-27 18:38:26 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-27 18:38:26 LOG5 begin_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2008-Apr-27 18:38:26 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-27 18:38:26 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.608917 2008.3251928537024 18.999933 2008-Apr-27 18:38:26 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333333 2008-Apr-27 18:38:26 LOG4 log_alfabeam: ALFABEAM 1 9.709456899027375 21.848797548256371 2008-Apr-27 18:38:26 LOG4 log_alfabeam: ALFABEAM 2 9.715221590030348 21.792477135782452 2008-Apr-27 18:38:26 LOG4 log_alfabeam: ALFABEAM 3 9.722439317921463 21.826610010497777 2008-Apr-27 18:38:26 LOG4 log_alfabeam: ALFABEAM 4 9.723875988048460 21.918013422820888 2008-Apr-27 18:38:26 LOG4 log_alfabeam: ALFABEAM 5 9.718077202316158 21.974469815280525 2008-Apr-27 18:38:26 LOG4 log_alfabeam: ALFABEAM 6 9.710876021698555 21.939387198352744 2008-Apr-27 18:38:26 INFO2 take_spectra: Starting WAPP+GALFA scan: 811800087 2008-Apr-27 18:38:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-27 18:38:27 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-27 18:38:27 LOG5 begin_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2008-Apr-27 18:38:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 18:38:27 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Apr-27 18:38:27 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 18:38:27 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:38:27 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:38:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81508.00 2008-Apr-27 18:38:28 INFO5 check_wapp_levels: WAPP power levels are between 1.166 and 1.472 (still bad) 2008-Apr-27 18:38:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 18:38:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:38:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:38:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-27 18:38:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:38:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-27 18:38:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-27 18:38:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-27 18:38:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-27 18:38:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.477 > 1.4)! 2008-Apr-27 18:38:30 LOG4 check_wapp_levels: WAPP-1 power levels: 1.256 1.319 1.227 1.240 2008-Apr-27 18:38:30 LOG4 check_wapp_levels: WAPP-2 power levels: 1.170 1.403 1.438 1.230 2008-Apr-27 18:38:30 LOG4 check_wapp_levels: WAPP-3 power levels: 1.387 1.444 1.188 1.274 2008-Apr-27 18:38:30 LOG4 check_wapp_levels: WAPP-4 power levels: 1.477 1.201 1.286 1.342 2008-Apr-27 18:38:32 INFO5 check_wapp_levels: WAPP power levels are between 1.164 and 1.476 (still bad) 2008-Apr-27 18:38:34 INFO5 check_wapp_levels: WAPP power levels are between 1.168 and 1.475 (still bad) 2008-Apr-27 18:38:36 INFO5 check_wapp_levels: WAPP power levels are between 1.164 and 1.475 (still bad) 2008-Apr-27 18:38:38 INFO5 check_wapp_levels: WAPP power levels are between 1.164 and 1.476 (still bad) 2008-Apr-27 18:38:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 18:38:38 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-27 18:38:38 LOG5 end_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2008-Apr-27 18:38:38 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-27 18:38:38 LOG5 end_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2008-Apr-27 18:38:38 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2008-Apr-27 18:38:38 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2008-Apr-27 18:38:38 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2008-Apr-27 18:38:38 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-27 18:38:38 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32519 J 2008-Apr-27 18:38:38 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.3 2008-Apr-27 18:38:38 LOG2 antvel: Parameters to Doppler: Topocentric 81518 2008 118 0.0 2008-Apr-27 18:38:38 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-27 18:38:38 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2008-Apr-27 18:38:38 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2008-Apr-27 18:38:38 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-27 18:38:38 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-27 18:38:38 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Apr-27 18:38:38 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 18:38:38 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-27 18:38:38 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-27 18:38:38 LOG5 begin_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2008-Apr-27 18:38:38 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-27 18:38:38 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.612259 2008.3251932339595 18.999933 2008-Apr-27 18:38:38 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333340 2008-Apr-27 18:38:38 LOG4 log_alfabeam: ALFABEAM 1 9.709458867423747 21.848718181908669 2008-Apr-27 18:38:38 LOG4 log_alfabeam: ALFABEAM 2 9.715226716700281 21.792461618594231 2008-Apr-27 18:38:38 LOG4 log_alfabeam: ALFABEAM 3 9.722442532138299 21.826672902314979 2008-Apr-27 18:38:38 LOG4 log_alfabeam: ALFABEAM 4 9.723874002551183 21.918093432231299 2008-Apr-27 18:38:38 LOG4 log_alfabeam: ALFABEAM 5 9.718071943475460 21.974485802996632 2008-Apr-27 18:38:38 LOG4 log_alfabeam: ALFABEAM 6 9.710872805360228 21.939322225194811 2008-Apr-27 18:38:38 INFO2 take_spectra: Starting WAPP+GALFA scan: 811800088 2008-Apr-27 18:38:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-27 18:38:39 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-27 18:38:39 LOG5 begin_task: Level: (4) ID = <10088> Status = 0 0 0 0 ok 2008-Apr-27 18:38:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 18:38:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Apr-27 18:38:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 18:38:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:38:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:38:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81520.00 2008-Apr-27 18:38:40 INFO5 check_wapp_levels: WAPP power levels are between 1.164 and 1.476 (still bad) 2008-Apr-27 18:38:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 18:38:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:38:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:38:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-27 18:38:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:38:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-27 18:38:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-27 18:38:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-27 18:38:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-27 18:38:42 INFO5 check_wapp_levels: WAPP power levels are between 1.166 and 1.482 (still bad) 2008-Apr-27 18:38:44 INFO5 check_wapp_levels: WAPP power levels are between 1.167 and 1.484 (still bad) 2008-Apr-27 18:38:46 INFO5 check_wapp_levels: WAPP power levels are between 1.165 and 1.484 (still bad) 2008-Apr-27 18:38:48 INFO5 check_wapp_levels: WAPP power levels are between 1.165 and 1.485 (still bad) 2008-Apr-27 18:38:50 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 18:38:50 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-27 18:38:50 LOG5 end_task: Level: (4) ID = <10088> Status = 0 0 0 0 ok 2008-Apr-27 18:38:50 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-27 18:38:50 LOG5 end_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2008-Apr-27 18:38:50 INFO2 smartfreq: Switching off CAL 2008-Apr-27 18:38:50 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-27 18:38:50 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-27 18:38:50 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-27 18:38:50 LOG5 begin_task: Level: (3) ID = <10089> Status = 0 0 0 0 ok 2008-Apr-27 18:38:50 INFO5 check_wapp_levels: WAPP power levels are between 1.163 and 1.482 (still bad) 2008-Apr-27 18:38:50 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-27 18:38:50 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-27 18:38:50 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-27 18:38:50 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-27 18:38:50 LOG5 end_task: Level: (3) ID = <10089> Status = 0 0 0 0 ok 2008-Apr-27 18:38:50 INFO3 restore_frequencies: Restoring original frequencies 2008-Apr-27 18:38:50 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-27 18:38:50 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32519 J 2008-Apr-27 18:38:50 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.3 2008-Apr-27 18:38:50 LOG2 antvel: Parameters to Doppler: Topocentric 81530 2008 118 0.0 2008-Apr-27 18:38:50 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-27 18:38:50 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.2 rest0=1381.2 rest1=1381.2 rest2=1381.2 rest3=1381.2 rest4=1381.2 rest5=1381.2 rest6=1381.2 rest7=1381.2 2008-Apr-27 18:38:50 INFO4 dopset_gen: New sky frequencies: 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 2008-Apr-27 18:38:50 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.200000 sky0=1381.200000 sky1=1381.200000 sky2=1381.200000 sky3=1381.200000 sky4=1381.200000 sky5=1381.200000 sky6=1381.200000 sky7=1381.200000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-27 18:38:50 LOG2 dopset_gen: Result from 'sky2syn': 1631.200000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-27 18:38:50 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2008-Apr-27 18:38:50 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 18:38:50 STOP finish_task: Finishing task 'smart frequency switching' 2008-Apr-27 18:38:50 LOG5 finish_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2008-Apr-27 18:38:50 DONE finish_task: DONE finished pattern: smart frequency switching 2008-Apr-27 18:38:50 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-27 18:38:50 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2008-Apr-27 18:38:50 LOG5 end_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2008-Apr-27 18:38:50 NOTE run_command_file: DONE with command file processing 2008-Apr-27 18:38:50 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2008-Apr-27 18:38:51 STOP finish_task: Finishing task 'running command file 'command_galfasrc.cmd'' 2008-Apr-27 18:38:51 LOG5 finish_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Apr-27 18:38:51 DONE finish_task: DONE finished running: command file 'command_galfasrc.cmd' 2008-Apr-27 18:38:51 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-27 18:38:51 END end_task: Finishing task 'running command file 'command_galfasrc.cmd'' with status 'OK' 2008-Apr-27 18:38:51 LOG5 end_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Apr-27 18:38:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2008-Apr-27 18:38:51 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 18:38:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:38:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:40:45 INFO1 CIMA-run_command_file: Transferring command file '080427_obs.cmd ' to executive ... 2008-Apr-27 18:40:45 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 3 {LOAD ages_config.conf} 2008-Apr-27 18:40:45 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 4 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5} 2008-Apr-27 18:40:45 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {FIXEDDRIFT az=247.94 alfaangle=-51.5 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_025 ra=95300.00 dec=231700.00} 2008-Apr-27 18:40:45 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 11 {FIXEDDRIFT az=238.55 alfaangle=-38.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_027 ra=95300.00 dec=231400.00} 2008-Apr-27 18:40:45 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 15 {FIXEDDRIFT az=211.83 alfaangle=-9.9 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_029 ra=95300.00 dec=231100.00} 2008-Apr-27 18:40:45 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 19 {FIXEDDRIFT az=147.89 alfaangle=48.5 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_031 ra=95300.00 dec=230800.00} 2008-Apr-27 18:40:45 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 23 {FIXEDDRIFT az=120.66 alfaangle=77.9 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_033 ra=95300.00 dec=230500.00} 2008-Apr-27 18:40:45 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 27 {FIXEDDRIFT az=111.10 alfaangle=-89.2 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_035 ra=95300.00 dec=230200.00} 2008-Apr-27 18:40:45 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 31 {FIXEDDRIFT az=313.92 alfaangle=58.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_079 ra=120900.00 dec=70300.00} 2008-Apr-27 18:40:45 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 35 {FIXEDDRIFT az=333.11 alfaangle=41.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_081 ra=120900.00 dec=70000.00} 2008-Apr-27 18:40:45 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 39 {FIXEDDRIFT az=0.00 alfaangle=19.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_042 ra=120900.00 dec=75830.00} 2008-Apr-27 18:40:45 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 43 {FIXEDDRIFT az=28.83 alfaangle=-5.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_044 ra=120900.00 dec=75530.00} 2008-Apr-27 18:40:45 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 47 {FIXEDDRIFT az=48.22 alfaangle=-22.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_046 ra=120900.00 dec=75230.00} 2008-Apr-27 18:40:45 LOG4 exec_msg: From OBSERVER: store_command_file_line 14 51 {FIXEDDRIFT az=47.62 alfaangle=-21.5 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p1_065 ra=122900.00 dec=72400.00} 2008-Apr-27 18:40:45 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-Apr-27 18:40:45 LOG4 exec_msg: From OBSERVER: run_command_file 080427_obs.cmd 1 1 14 2008-Apr-27 18:40:45 LOG4 run_command_file: Calling 'run_command_file 080427_obs.cmd 1 1 14' 2008-Apr-27 18:40:45 BEGIN begin_task: Starting task 'running command file '080427_obs.cmd'' 2008-Apr-27 18:40:45 LOG5 begin_task: Level: (1) ID = <10090> Status = 0 0 0 0 ok 2008-Apr-27 18:40:45 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '080427_obs.cmd' ...} 2008-Apr-27 18:40:45 NOTE run_command_file: Starting execution of command file '080427_obs.cmd' from line 1 2008-Apr-27 18:40:45 COMMAND run_command_line: EXECUTING command 3: 'LOAD ages_config.conf' 2008-Apr-27 18:40:45 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2008-Apr-27 18:40:45 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-27 18:40:45 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2008-Apr-27 18:40:45 NOTE CIMA-load_config_file: Loading configuration file 'ages_config.conf' 2008-Apr-27 18:40:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Apr-27 18:40:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Apr-27 18:40:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Apr-27 18:40:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Apr-27 18:40:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Apr-27 18:40:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2008-Apr-27 18:40:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Apr-27 18:40:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786" 2008-Apr-27 18:40:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786" 2008-Apr-27 18:40:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786" 2008-Apr-27 18:40:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786" 2008-Apr-27 18:40:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786" 2008-Apr-27 18:40:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786" 2008-Apr-27 18:40:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786" 2008-Apr-27 18:40:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786" 2008-Apr-27 18:40:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786" 2008-Apr-27 18:40:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Apr-27 18:40:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Apr-27 18:40:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Apr-27 18:40:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Apr-27 18:40:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Apr-27 18:40:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Apr-27 18:40:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Apr-27 18:40:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Apr-27 18:40:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Apr-27 18:40:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Apr-27 18:40:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Apr-27 18:40:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Apr-27 18:40:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Apr-27 18:40:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2008-Apr-27 18:40:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Apr-27 18:40:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Apr-27 18:40:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Apr-27 18:40:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Apr-27 18:40:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Apr-27 18:40:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Apr-27 18:40:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Apr-27 18:40:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Apr-27 18:40:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Apr-27 18:40:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1670.405752" 2008-Apr-27 18:40:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Apr-27 18:40:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Apr-27 18:40:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Apr-27 18:40:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Apr-27 18:40:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Apr-27 18:40:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Apr-27 18:40:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Apr-27 18:40:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Apr-27 18:40:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Apr-27 18:40:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Apr-27 18:40:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Apr-27 18:40:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Apr-27 18:40:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Apr-27 18:40:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Apr-27 18:40:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Apr-27 18:40:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Apr-27 18:40:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Apr-27 18:40:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Apr-27 18:40:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Apr-27 18:40:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Apr-27 18:40:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Apr-27 18:40:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Apr-27 18:40:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Apr-27 18:40:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Apr-27 18:40:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Apr-27 18:40:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Apr-27 18:40:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Apr-27 18:40:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Apr-27 18:40:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Apr-27 18:40:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Apr-27 18:40:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Apr-27 18:40:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Apr-27 18:40:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Apr-27 18:40:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Apr-27 18:40:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Apr-27 18:40:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Apr-27 18:40:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Apr-27 18:40:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Apr-27 18:40:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Apr-27 18:40:47 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-27 18:40:47 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Apr-27 18:40:47 LOG5 begin_task: Level: (2) ID = <10091> Status = 0 0 0 0 ok 2008-Apr-27 18:40:47 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Apr-27 18:40:47 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Apr-27 18:40:47 LOG1 config_iflo: Receiver ALFA already selected 2008-Apr-27 18:40:47 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 18:40:47 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-27 18:40:47 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 18:40:47 LOG5 begin_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2008-Apr-27 18:40:47 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 18:40:47 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 18:40:47 LOG5 end_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2008-Apr-27 18:40:47 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 18:40:47 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-27 18:40:47 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2008-Apr-27 18:40:47 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2008-Apr-27 18:40:47 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Apr-27 18:40:47 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Apr-27 18:40:47 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2008-Apr-27 18:40:47 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2008-Apr-27 18:40:47 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2008-Apr-27 18:40:47 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1670405752.0} 2008-Apr-27 18:40:47 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2008-Apr-27 18:40:47 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2008-Apr-27 18:40:47 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Apr-27 18:40:47 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Apr-27 18:40:47 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Apr-27 18:40:47 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Apr-27 18:40:47 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Apr-27 18:40:47 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2008-Apr-27 18:40:47 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2008-Apr-27 18:40:48 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2008-Apr-27 18:40:48 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2008-Apr-27 18:40:48 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Apr-27 18:40:48 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2008-Apr-27 18:40:48 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2008-Apr-27 18:40:48 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Apr-27 18:40:48 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 18:40:48 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2008-Apr-27 18:40:48 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2008-Apr-27 18:40:48 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Apr-27 18:40:48 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2008-Apr-27 18:40:48 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2008-Apr-27 18:40:48 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Apr-27 18:40:48 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 18:40:48 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Apr-27 18:40:48 LOG5 begin_task: Level: (3) ID = <10093> Status = 0 0 0 0 ok 2008-Apr-27 18:40:48 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1670405752.0} 2008-Apr-27 18:40:48 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Apr-27 18:40:48 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 18:40:48 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 18:40:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:40:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:40:48 LOG4 got_cormsg: From DATATAKING: vw% DONE 2008-Apr-27 18:40:48 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Apr-27 18:40:48 LOG5 end_task: Level: (3) ID = <10093> Status = 0 0 0 0 ok 2008-Apr-27 18:40:48 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Apr-27 18:40:48 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Apr-27 18:40:48 LOG5 finish_task: Level: (2) ID = <10091> Status = 0 0 0 0 ok 2008-Apr-27 18:40:48 DONE finish_task: DONE finished configuration: IF/LO path 2008-Apr-27 18:40:48 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-27 18:40:48 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Apr-27 18:40:48 LOG5 end_task: Level: (2) ID = <10091> Status = 0 0 0 0 ok 2008-Apr-27 18:40:48 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Apr-27 18:40:48 LOG5 begin_task: Level: (2) ID = <10094> Status = 0 0 0 0 ok 2008-Apr-27 18:40:48 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Apr-27 18:40:48 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Apr-27 18:40:48 START begin_task: Starting task 'selecting calibration port' 2008-Apr-27 18:40:48 LOG5 begin_task: Level: (3) ID = <10095> Status = 0 0 0 0 ok 2008-Apr-27 18:40:48 LOG3 vw_send: To DATATAKING: calport 3 2008-Apr-27 18:40:48 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Apr-27 18:40:48 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 18:40:48 START begin_task: Starting task 'waiting on calport' 2008-Apr-27 18:40:48 LOG5 begin_task: Level: (4) ID = <10096> Status = 0 0 0 0 ok 2008-Apr-27 18:40:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:40:48 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Apr-27 18:40:48 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 18:40:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:40:49 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-27 18:40:49 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Apr-27 18:40:49 LOG5 end_task: Level: (4) ID = <10096> Status = 0 0 0 0 ok 2008-Apr-27 18:40:49 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Apr-27 18:40:49 STOP finish_task: Finishing task 'selecting calibration port' 2008-Apr-27 18:40:49 LOG5 finish_task: Level: (3) ID = <10095> Status = 0 0 0 0 ok 2008-Apr-27 18:40:49 INFO2 finish_task: DONE finished configuring: calibration port 2008-Apr-27 18:40:49 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 18:40:49 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Apr-27 18:40:49 LOG5 end_task: Level: (3) ID = <10095> Status = 0 0 0 0 ok 2008-Apr-27 18:40:49 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Apr-27 18:40:49 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Apr-27 18:40:49 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Apr-27 18:40:49 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Apr-27 18:40:49 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Apr-27 18:40:49 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Apr-27 18:40:49 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Apr-27 18:40:49 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Apr-27 18:40:49 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Steve Schnei 2008-Apr-27 18:40:49 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Steve Schnei 2008-Apr-27 18:40:49 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Steve Schnei 2008-Apr-27 18:40:49 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Steve Schnei 2008-Apr-27 18:40:49 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Apr-27 18:40:49 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Apr-27 18:40:49 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-27 18:40:49 LOG5 begin_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2008-Apr-27 18:40:49 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Apr-27 18:40:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:40:49 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-27 18:40:49 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Apr-27 18:40:49 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-27 18:40:49 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Steve Schnei' 2008-Apr-27 18:40:49 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-27 18:40:49 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-27 18:40:49 LOG5 end_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2008-Apr-27 18:40:49 LOG3 sock_errsend: To WAPPDATA: FLUSH 2008-Apr-27 18:40:49 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Apr-27 18:40:49 LOG5 finish_task: Level: (2) ID = <10094> Status = 0 0 0 0 ok 2008-Apr-27 18:40:49 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Apr-27 18:40:49 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-27 18:40:49 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Apr-27 18:40:49 LOG5 end_task: Level: (2) ID = <10094> Status = 0 0 0 0 ok 2008-Apr-27 18:40:49 COMMAND run_command_line: EXECUTING command 4: 'SETUP FIXEDDRIFT calwhen=tracking calsecs=5' 2008-Apr-27 18:40:49 COMMAND run_command_line: EXECUTING command 7: 'FIXEDDRIFT az=247.94 alfaangle=-51.5 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_025 ra=95300.00 dec=231700.00' 2008-Apr-27 18:40:49 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-27 18:40:49 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Apr-27 18:40:50 WARNING check_obsmode: WARNING failed to get a response from the CIMA frontend when checking options for 'fixed azimuth drift map'! 2008-Apr-27 18:40:50 NOTE check_obsmode: Assuming that the options are OK 2008-Apr-27 18:40:50 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 247.94 -51.5 hcorcal 5 tracking no first 1 AGES3193_p2_025 95300.00 231700.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-27 18:40:50 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-27 18:40:50 LOG5 begin_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2008-Apr-27 18:40:50 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'galfasrc' 2008-Apr-27 18:40:50 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-27 18:40:50 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p2_025} 2008-Apr-27 18:40:50 INFO3 fixed_driftmap: Sending telescope to Az = 247.94 and ZA = 14.62 2008-Apr-27 18:40:50 LOG3 track_source: Calling 'track_source AGES3193_p2_025 247.94 14.6183315512 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-27 18:40:50 START begin_task: Starting task 'sending tracking commands' 2008-Apr-27 18:40:50 LOG5 begin_task: Level: (3) ID = <10099> Status = 0 0 0 0 ok 2008-Apr-27 18:40:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_025} INFO {Slewing to source 'AGES3193_p2_025' ...} 2008-Apr-27 18:40:50 INFO1 track_source: Starting to track AGES3193_p2_025 2008-Apr-27 18:40:50 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_025" 2008-Apr-27 18:40:50 LOG3 vw_send: To DATATAKING: set ra 247.94 2008-Apr-27 18:40:50 LOG3 vw_send: To DATATAKING: set dec 14.6183315512 2008-Apr-27 18:40:50 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-27 18:40:51 LOG3 vw_send: To DATATAKING: pnt tr 247.94 14.6183315512 -CF 2008-Apr-27 18:40:51 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 18:40:51 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-27 18:40:51 LOG5 finish_task: Level: (3) ID = <10099> Status = 0 0 0 0 ok 2008-Apr-27 18:40:51 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-27 18:40:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 18:40:51 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-27 18:40:51 LOG5 end_task: Level: (3) ID = <10099> Status = 0 0 0 0 ok 2008-Apr-27 18:40:51 START begin_task: Starting task 'rotate ALFA to -51.5 degrees' 2008-Apr-27 18:40:51 LOG5 begin_task: Level: (3) ID = <10100> Status = 0 0 0 0 ok 2008-Apr-27 18:40:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -51.5 degrees ...} 2008-Apr-27 18:40:51 INFO2 rotate_alfa: ALFA commanded to -51.5 degrees 2008-Apr-27 18:40:51 LOG3 sock_errsend: To ALFAMOTOR: POSITION -51.5 REPLY 2008-Apr-27 18:40:51 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-27 18:40:51 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-27 18:40:51 LOG5 begin_task: Level: (4) ID = <10101> Status = 0 0 0 0 ok 2008-Apr-27 18:40:51 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-27 18:40:51 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_025" 2008-Apr-27 18:40:51 LOG4 got_cormsg: From DATATAKING: set ra 247.94 2008-Apr-27 18:40:51 LOG4 got_cormsg: From DATATAKING: set dec 14.6183315512 2008-Apr-27 18:40:51 LOG4 got_cormsg: From DATATAKING: vw% 247.94 2008-Apr-27 18:40:51 LOG4 got_cormsg: From DATATAKING: vw% 14.6183315512 2008-Apr-27 18:40:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:40:51 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-27 18:40:51 LOG4 got_cormsg: From DATATAKING: pnt tr 247.94 14.6183315512 -CF 2008-Apr-27 18:40:51 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 18:40:51 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-27 18:40:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:41:31 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-27 18:41:31 INFO3 alfa_motor: ALFA rotator in-position -51.50 degrees 2008-Apr-27 18:41:31 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-27 18:41:31 LOG5 end_task: Level: (4) ID = <10101> Status = 0 0 0 0 ok 2008-Apr-27 18:41:31 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-27 18:41:31 STOP finish_task: Finishing task 'rotate ALFA to -51.5 degrees' 2008-Apr-27 18:41:31 LOG5 finish_task: Level: (3) ID = <10100> Status = 0 0 0 0 ok 2008-Apr-27 18:41:31 INFO2 finish_task: DONE finished configuration: rotating ALFA to -51.5 degrees 2008-Apr-27 18:41:31 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 18:41:31 STOP end_task: Finishing task 'rotate ALFA to -51.5 degrees' with status 'OK' 2008-Apr-27 18:41:31 LOG5 end_task: Level: (3) ID = <10100> Status = 0 0 0 0 ok 2008-Apr-27 18:41:31 START begin_task: Starting task 'waiting on telescope' 2008-Apr-27 18:41:31 LOG5 begin_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2008-Apr-27 18:41:31 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-27 18:41:31 LOG3 waittrk: Start waittrk 5 2008-Apr-27 18:41:31 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-27 18:41:31 LOG5 begin_task: Level: (4) ID = <10103> Status = 0 0 0 0 ok 2008-Apr-27 18:41:36 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-27 18:41:36 LOG5 end_task: Level: (4) ID = <10103> Status = 0 0 0 0 ok 2008-Apr-27 18:41:36 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-27 18:41:36 LOG5 begin_task: Level: (4) ID = <10104> Status = 0 0 0 0 ok 2008-Apr-27 18:41:36 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-27 18:41:36 LOG5 end_task: Level: (4) ID = <10104> Status = 0 0 0 0 ok 2008-Apr-27 18:41:36 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-27 18:41:36 INFO2 waittrk: Now tracking AGES3193_p2_025 2008-Apr-27 18:41:36 LOG4 waittrk: Current telescope position: Az = 247.49 ZA = 14.63 2008-Apr-27 18:41:36 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-27 18:41:36 LOG5 finish_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2008-Apr-27 18:41:36 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-27 18:41:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 18:41:36 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-27 18:41:36 LOG5 end_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2008-Apr-27 18:41:36 START begin_task: Starting task 'selecting calibration type' 2008-Apr-27 18:41:36 LOG5 begin_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2008-Apr-27 18:41:36 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-27 18:41:36 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-27 18:41:36 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 18:41:36 START begin_task: Starting task 'waiting on setcal' 2008-Apr-27 18:41:36 LOG5 begin_task: Level: (4) ID = <10106> Status = 0 0 0 0 ok 2008-Apr-27 18:41:36 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-27 18:41:36 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 18:41:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:41:36 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-27 18:41:36 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-27 18:41:36 LOG5 end_task: Level: (4) ID = <10106> Status = 0 0 0 0 ok 2008-Apr-27 18:41:36 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-27 18:41:36 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 18:41:36 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-27 18:41:36 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 18:41:36 LOG5 begin_task: Level: (4) ID = <10107> Status = 0 0 0 0 ok 2008-Apr-27 18:41:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:41:36 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 18:41:36 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 18:41:36 LOG5 end_task: Level: (4) ID = <10107> Status = 0 0 0 0 ok 2008-Apr-27 18:41:36 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 18:41:36 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-27 18:41:36 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 18:41:36 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-27 18:41:36 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 18:41:36 LOG5 begin_task: Level: (4) ID = <10108> Status = 0 0 0 0 ok 2008-Apr-27 18:41:37 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 18:41:37 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 18:41:37 LOG5 end_task: Level: (4) ID = <10108> Status = 0 0 0 0 ok 2008-Apr-27 18:41:37 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 18:41:37 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-27 18:41:37 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-27 18:41:37 LOG5 finish_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2008-Apr-27 18:41:37 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-27 18:41:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 18:41:37 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-27 18:41:37 LOG5 end_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2008-Apr-27 18:41:37 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2008-Apr-27 18:41:37 INFO2 astwait: Waiting for 824 seconds from 22:41:37 to 22:55:21 UTC ... 2008-Apr-27 18:41:37 LOG4 send_obs_status: To obs_status: <1> TASKTIME 824 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-27 18:41:37 START begin_task: Starting task 'waiting on waiting for AST time' 2008-Apr-27 18:41:37 LOG5 begin_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2008-Apr-27 18:55:21 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2008-Apr-27 18:55:21 LOG5 end_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2008-Apr-27 18:55:21 INFO3 astwait: Finished waiting 2008-Apr-27 18:55:21 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-27 18:55:21 LOG5 dopset_later: Calling 'dopset_later 60.785096254486433' 2008-Apr-27 18:55:21 INFO3 dopset_later: Setting Doppler correction for 18:56:21 (60.8 seconds from now) 2008-Apr-27 18:55:21 LOG5 antvel: Calling 'antvel 247.940000 14.618332 F 60.785096254486433' 2008-Apr-27 18:55:21 LOG2 antvel: Parameters to Doppler: Heliocentric 82581 2008 118 0.0 2008-Apr-27 18:55:21 INFO5 antvel: Computed antenna velocity: +27.99626 km/s 2008-Apr-27 18:55:21 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=27.996257002 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-27 18:55:21 INFO4 dopset_gen: New sky frequencies: 1381.114453 1381.114453 1381.114453 1381.114453 1381.114453 1381.114453 1381.114453 1381.114453 1381.114453 2008-Apr-27 18:55:21 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.114453 sky0=1381.114453 sky1=1381.114453 sky2=1381.114453 sky3=1381.114453 sky4=1381.114453 sky5=1381.114453 sky6=1381.114453 sky7=1381.114453 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-27 18:55:21 LOG2 dopset_gen: Result from 'sky2syn': 1631.114453 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-27 18:55:21 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631114453.0} 2008-Apr-27 18:55:21 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 18:55:21 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-27 18:55:21 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-27 18:55:21 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:03.2 Dec = +23:17:02.0 2008-Apr-27 18:55:21 LOG3 track_source: Calling 'track_source AGES3193_p2_025 095203.2 231702.0 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-27 18:55:21 START begin_task: Starting task 'sending tracking commands' 2008-Apr-27 18:55:21 LOG5 begin_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2008-Apr-27 18:55:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_025} INFO {Slewing to source 'AGES3193_p2_025' ...} 2008-Apr-27 18:55:21 INFO1 track_source: Starting to track AGES3193_p2_025 2008-Apr-27 18:55:21 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_025" 2008-Apr-27 18:55:21 LOG3 vw_send: To DATATAKING: set ra 095203.2 2008-Apr-27 18:55:21 LOG3 vw_send: To DATATAKING: set dec 231702.0 2008-Apr-27 18:55:21 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-27 18:55:21 LOG3 vw_send: To DATATAKING: pnt tr 095203.2 231702.0 -CJ 2008-Apr-27 18:55:21 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 18:55:21 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-27 18:55:21 LOG5 finish_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2008-Apr-27 18:55:21 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-27 18:55:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 18:55:21 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-27 18:55:21 LOG5 end_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2008-Apr-27 18:55:21 START begin_task: Starting task 'waiting on telescope' 2008-Apr-27 18:55:21 LOG5 begin_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2008-Apr-27 18:55:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-27 18:55:21 LOG3 waittrk: Start waittrk 5 2008-Apr-27 18:55:21 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-27 18:55:21 LOG5 begin_task: Level: (4) ID = <10112> Status = 0 0 0 0 ok 2008-Apr-27 18:55:21 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631114453.0} 2008-Apr-27 18:55:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 18:55:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:55:21 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_025" 2008-Apr-27 18:55:21 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-27 18:55:21 LOG4 got_cormsg: From DATATAKING: set ra 095203.2 2008-Apr-27 18:55:21 LOG4 got_cormsg: From DATATAKING: set dec 231702.0 2008-Apr-27 18:55:21 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-27 18:55:21 LOG4 got_cormsg: From DATATAKING: pnt tr 095203.2 231702.0 -CJ 2008-Apr-27 18:55:21 LOG4 got_cormsg: From DATATAKING: 095203.2 2008-Apr-27 18:55:21 LOG4 got_cormsg: From DATATAKING: vw% 231702.0 2008-Apr-27 18:55:21 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2008-Apr-27 18:55:21 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 18:55:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:55:26 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-27 18:55:26 LOG5 end_task: Level: (4) ID = <10112> Status = 0 0 0 0 ok 2008-Apr-27 18:55:26 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-27 18:55:26 LOG5 begin_task: Level: (4) ID = <10113> Status = 0 0 0 0 ok 2008-Apr-27 18:55:28 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-27 18:55:28 LOG5 end_task: Level: (4) ID = <10113> Status = 0 0 0 0 ok 2008-Apr-27 18:55:28 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-27 18:55:28 INFO2 waittrk: Now tracking AGES3193_p2_025 2008-Apr-27 18:55:28 LOG4 waittrk: Current telescope position: Az = 247.47 ZA = 14.61 2008-Apr-27 18:55:28 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-27 18:55:28 LOG5 finish_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2008-Apr-27 18:55:28 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-27 18:55:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 18:55:28 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-27 18:55:28 LOG5 end_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2008-Apr-27 18:55:28 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-27 18:55:28 LOG5 begin_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2008-Apr-27 18:55:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-27 18:55:28 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-27 18:55:28 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-27 18:55:28 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-27 18:55:28 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 18:55:28 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-27 18:55:28 LOG5 begin_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2008-Apr-27 18:55:29 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-27 18:55:29 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 18:55:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:55:31 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-27 18:55:31 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-27 18:55:31 LOG5 end_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2008-Apr-27 18:55:31 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-27 18:55:31 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-27 18:55:31 LOG5 begin_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2008-Apr-27 18:55:31 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-27 18:55:31 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-27 18:55:32 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-27 18:55:32 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-27 18:55:32 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-27 18:55:32 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-27 18:55:32 LOG5 begin_task: Level: (5) ID = <10117> Status = 0 0 0 0 ok 2008-Apr-27 18:55:32 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-27 18:55:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:55:32 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 1 dB --- beam 1: 7 6 dB 2008-Apr-27 18:55:32 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-27 18:55:32 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 3 3 dB 2008-Apr-27 18:55:32 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 6 dB 2008-Apr-27 18:55:32 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-27 18:55:32 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-27 18:55:32 LOG5 end_task: Level: (5) ID = <10117> Status = 0 0 0 0 ok 2008-Apr-27 18:55:32 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.923 0.998 ALFA beam 1: 1.138 1.048 2008-Apr-27 18:55:32 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.063 0.959 ALFA beam 3: 1.023 1.062 2008-Apr-27 18:55:32 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.947 0.993 ALFA beam 5: 1.085 0.956 2008-Apr-27 18:55:32 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.087 1.052 ALFA beam 7: 0.950 0.941 2008-Apr-27 18:55:32 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-27 18:55:32 LOG5 finish_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2008-Apr-27 18:55:32 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-27 18:55:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 18:55:32 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-27 18:55:32 LOG5 end_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2008-Apr-27 18:55:32 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-27 18:55:32 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-27 18:55:32 LOG5 finish_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2008-Apr-27 18:55:32 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-27 18:55:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 18:55:32 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-27 18:55:32 LOG5 end_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2008-Apr-27 18:55:32 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Steve Schnei 2008-Apr-27 18:55:32 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Steve Schnei 2008-Apr-27 18:55:32 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Steve Schnei 2008-Apr-27 18:55:32 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Steve Schnei 2008-Apr-27 18:55:32 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-27 18:55:32 START begin_task: Starting task 'WAPP calibration' 2008-Apr-27 18:55:32 LOG5 begin_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2008-Apr-27 18:55:32 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-27 18:55:32 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-27 18:55:32 START begin_task: Starting task 'selecting calibration type' 2008-Apr-27 18:55:32 LOG5 begin_task: Level: (4) ID = <10119> Status = 0 0 0 0 ok 2008-Apr-27 18:55:33 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-27 18:55:33 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-27 18:55:33 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 18:55:33 START begin_task: Starting task 'waiting on setcal' 2008-Apr-27 18:55:33 LOG5 begin_task: Level: (5) ID = <10120> Status = 0 0 0 0 ok 2008-Apr-27 18:55:33 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Steve Schnei' 2008-Apr-27 18:55:33 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-27 18:55:33 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 18:55:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:55:33 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-27 18:55:33 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-27 18:55:33 LOG5 end_task: Level: (5) ID = <10120> Status = 0 0 0 0 ok 2008-Apr-27 18:55:33 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-27 18:55:33 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 18:55:33 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-27 18:55:33 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 18:55:33 LOG5 begin_task: Level: (5) ID = <10121> Status = 0 0 0 0 ok 2008-Apr-27 18:55:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:55:33 NOTE WAPPDATA-new_file: New FITS file: wapp.20080427.a2048.0001.fits 2008-Apr-27 18:55:33 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080427.a2048.0001.fits} 2008-Apr-27 18:55:33 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 18:55:33 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 18:55:33 LOG5 end_task: Level: (5) ID = <10121> Status = 0 0 0 0 ok 2008-Apr-27 18:55:33 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 18:55:33 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-27 18:55:33 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 18:55:33 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-27 18:55:33 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 18:55:33 LOG5 begin_task: Level: (5) ID = <10122> Status = 0 0 0 0 ok 2008-Apr-27 18:55:33 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 18:55:33 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 18:55:33 LOG5 end_task: Level: (5) ID = <10122> Status = 0 0 0 0 ok 2008-Apr-27 18:55:33 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 18:55:33 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-27 18:55:33 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-27 18:55:33 LOG5 finish_task: Level: (4) ID = <10119> Status = 0 0 0 0 ok 2008-Apr-27 18:55:33 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-27 18:55:33 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 18:55:34 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-27 18:55:34 LOG5 end_task: Level: (4) ID = <10119> Status = 0 0 0 0 ok 2008-Apr-27 18:55:34 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-27 18:55:34 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-27 18:55:34 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-27 18:55:34 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-27 18:55:34 LOG5 begin_task: Level: (4) ID = <10123> Status = 0 0 0 0 ok 2008-Apr-27 18:55:34 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-27 18:55:34 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-27 18:55:34 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-27 18:55:34 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-27 18:55:34 LOG5 end_task: Level: (4) ID = <10123> Status = 0 0 0 0 ok 2008-Apr-27 18:55:34 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-27 18:55:34 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-27 18:55:34 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-27 18:55:34 LOG5 begin_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2008-Apr-27 18:55:34 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-27 18:55:34 LOG5 log_alfabeam: Parameters: 9.8675555555555547 23.283888888888889 8.894976 2008.3252253973687 -51.500004 2008-Apr-27 18:55:34 LOG4 log_alfabeam: ALFABEAM 0 9.867555555555553 23.283888888888896 2008-Apr-27 18:55:34 LOG4 log_alfabeam: ALFABEAM 1 9.868343999688353 23.192816076598664 2008-Apr-27 18:55:34 LOG4 log_alfabeam: ALFABEAM 2 9.874549872418516 23.253305845634092 2008-Apr-27 18:55:34 LOG4 log_alfabeam: ALFABEAM 3 9.873737826117283 23.344937254884368 2008-Apr-27 18:55:34 LOG4 log_alfabeam: ALFABEAM 4 9.866723891653992 23.374984579377408 2008-Apr-27 18:55:34 LOG4 log_alfabeam: ALFABEAM 5 9.860556408363532 23.313729118620429 2008-Apr-27 18:55:34 LOG4 log_alfabeam: ALFABEAM 6 9.861364311320598 23.223191003209294 2008-Apr-27 18:55:34 INFO2 take_spectra: Starting WAPP scan: 811800089 2008-Apr-27 18:55:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-27 18:55:34 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-27 18:55:34 LOG5 begin_task: Level: (5) ID = <10125> Status = 0 0 0 0 ok 2008-Apr-27 18:55:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 18:55:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82535.00 2008-Apr-27 18:55:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.114453 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 18:55:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.114453 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:55:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.114453 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:55:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.114453 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-27 18:55:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.114453 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:55:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.114453 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-27 18:55:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.114453 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-27 18:55:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.114453 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-27 18:55:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.114453 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-27 18:55:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 18:55:40 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-27 18:55:40 LOG5 end_task: Level: (5) ID = <10125> Status = 0 0 0 0 ok 2008-Apr-27 18:55:40 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-27 18:55:40 LOG5 end_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2008-Apr-27 18:55:40 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-27 18:55:40 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-27 18:55:40 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-27 18:55:40 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-27 18:55:40 LOG5 begin_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2008-Apr-27 18:55:40 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-27 18:55:40 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-27 18:55:40 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-27 18:55:40 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-27 18:55:40 LOG5 end_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2008-Apr-27 18:55:40 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-27 18:55:40 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-27 18:55:40 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-27 18:55:40 LOG5 begin_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2008-Apr-27 18:55:40 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-27 18:55:40 LOG5 log_alfabeam: Parameters: 9.8675555555555547 23.283888888888889 8.896926 2008.3252256191852 -51.500004 2008-Apr-27 18:55:40 LOG4 log_alfabeam: ALFABEAM 0 9.867555555555549 23.283888888888889 2008-Apr-27 18:55:40 LOG4 log_alfabeam: ALFABEAM 1 9.868348751797008 23.192824004123139 2008-Apr-27 18:55:40 LOG4 log_alfabeam: ALFABEAM 2 9.874551480340257 23.253375133419986 2008-Apr-27 18:55:40 LOG4 log_alfabeam: ALFABEAM 3 9.873734597097240 23.344999397577130 2008-Apr-27 18:55:40 LOG4 log_alfabeam: ALFABEAM 4 9.866719054122937 23.374976263045866 2008-Apr-27 18:55:40 LOG4 log_alfabeam: ALFABEAM 5 9.860554839513370 23.313658540700271 2008-Apr-27 18:55:40 LOG4 log_alfabeam: ALFABEAM 6 9.861367494790009 23.223129518007799 2008-Apr-27 18:55:40 INFO2 take_spectra: Starting WAPP scan: 811800090 2008-Apr-27 18:55:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-27 18:55:41 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-27 18:55:41 LOG5 begin_task: Level: (5) ID = <10128> Status = 0 0 0 0 ok 2008-Apr-27 18:55:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 18:55:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.539 > 1.4)! 2008-Apr-27 18:55:41 LOG4 check_wapp_levels: WAPP-1 power levels: 1.262 1.277 1.539 1.429 2008-Apr-27 18:55:41 LOG4 check_wapp_levels: WAPP-2 power levels: 1.440 1.323 1.403 1.475 2008-Apr-27 18:55:41 LOG4 check_wapp_levels: WAPP-3 power levels: 1.314 1.372 1.491 1.267 2008-Apr-27 18:55:41 LOG4 check_wapp_levels: WAPP-4 power levels: 1.496 1.450 1.306 1.296 2008-Apr-27 18:55:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82542.00 2008-Apr-27 18:55:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.114453 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 18:55:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.114453 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:55:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.114453 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:55:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.114453 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-27 18:55:47 INFO5 check_wapp_levels: WAPP power levels are between 1.262 and 1.539 (still bad) 2008-Apr-27 18:55:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.114453 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:55:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.114453 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-27 18:55:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.114453 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-27 18:55:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.114453 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-27 18:55:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.114453 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-27 18:55:47 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-27 18:55:47 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 18:55:47 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-27 18:55:47 LOG5 end_task: Level: (5) ID = <10128> Status = 0 0 0 0 ok 2008-Apr-27 18:55:47 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-27 18:55:47 LOG5 end_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2008-Apr-27 18:55:47 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-27 18:55:47 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-27 18:55:47 LOG5 finish_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2008-Apr-27 18:55:47 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-27 18:55:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 18:55:47 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-27 18:55:47 LOG5 end_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2008-Apr-27 18:55:47 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-27 18:55:47 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 247.94 and ZA = 14.62 2008-Apr-27 18:55:47 LOG3 track_source: Calling 'track_source AGES3193_p2_025 247.94 14.6183315512 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-27 18:55:47 START begin_task: Starting task 'sending tracking commands' 2008-Apr-27 18:55:47 LOG5 begin_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2008-Apr-27 18:55:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_025} INFO {Slewing to source 'AGES3193_p2_025' ...} 2008-Apr-27 18:55:47 INFO1 track_source: Starting to track AGES3193_p2_025 2008-Apr-27 18:55:47 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_025" 2008-Apr-27 18:55:47 LOG3 vw_send: To DATATAKING: set ra 247.94 2008-Apr-27 18:55:47 LOG3 vw_send: To DATATAKING: set dec 14.6183315512 2008-Apr-27 18:55:47 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-27 18:55:47 LOG3 vw_send: To DATATAKING: pnt tr 247.94 14.6183315512 -CF 2008-Apr-27 18:55:47 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 18:55:47 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-27 18:55:47 LOG5 finish_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2008-Apr-27 18:55:47 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-27 18:55:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 18:55:48 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-27 18:55:48 LOG5 end_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2008-Apr-27 18:55:48 LOG1 fixed_driftmap: Parameters: HA = -00:58:59.5 Start = 08:54:29.8 LST = 08:53:56.0 diff = 33.9 secs 2008-Apr-27 18:55:48 INFO2 fixed_driftmap: Waiting 31.9 seconds for RA 9:53:29 2008-Apr-27 18:55:48 INFO2 lstwait: Waiting for 31.8 secs from LST 08:53:56 to LST 08:54:28 ... 2008-Apr-27 18:55:48 LOG4 send_obs_status: To obs_status: <1> TASKTIME 31.792474443287819 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-27 18:55:48 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-27 18:55:48 LOG5 begin_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2008-Apr-27 18:55:48 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_025" 2008-Apr-27 18:55:48 LOG4 got_cormsg: From DATATAKING: set ra 247.94 2008-Apr-27 18:55:48 LOG4 got_cormsg: From DATATAKING: set dec 14.6183315512 2008-Apr-27 18:55:48 LOG4 got_cormsg: From DATATAKING: vw% 247.94 2008-Apr-27 18:55:48 LOG4 got_cormsg: From DATATAKING: vw% 14.6183315512 2008-Apr-27 18:55:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:55:48 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-27 18:55:48 LOG4 got_cormsg: From DATATAKING: pnt tr 247.94 14.6183315512 -CF 2008-Apr-27 18:55:48 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 18:55:48 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-27 18:55:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 18:55:53 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.923 and 1.141 2008-Apr-27 18:56:19 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-27 18:56:19 LOG5 end_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2008-Apr-27 18:56:19 LOG4 lstwait: Finished waiting, the gui caused difference: 0.21088171999679162 2008-Apr-27 18:56:19 INFO3 lstwait: Finished waiting 2008-Apr-27 18:56:19 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-27 18:56:19 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-27 18:56:19 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-27 18:56:20 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-27 18:56:20 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-27 18:56:20 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-27 18:56:20 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-27 18:56:20 LOG5 begin_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2008-Apr-27 18:56:20 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-27 18:56:20 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-27 18:56:20 INFO2 take_spectra: Starting WAPP scan: 811800091 2008-Apr-27 18:56:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-27 18:56:20 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-27 18:56:20 LOG5 begin_task: Level: (4) ID = <10132> Status = 0 0 0 0 ok 2008-Apr-27 18:56:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 18:56:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82581.00 2008-Apr-27 18:56:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.114453 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 18:56:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.114453 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:56:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.114453 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:56:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.114453 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-27 18:56:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.114453 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 18:56:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.114453 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-27 18:56:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.114453 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-27 18:56:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.114453 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-27 18:56:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.114453 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-27 19:16:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 19:16:21 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-27 19:16:21 LOG5 end_task: Level: (4) ID = <10132> Status = 0 0 0 0 ok 2008-Apr-27 19:16:21 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-27 19:16:21 LOG5 end_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2008-Apr-27 19:16:21 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-27 19:16:21 LOG5 finish_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2008-Apr-27 19:16:21 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-27 19:16:21 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-27 19:16:21 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-27 19:16:21 LOG5 end_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2008-Apr-27 19:16:21 COMMAND run_command_line: EXECUTING command 11: 'FIXEDDRIFT az=238.55 alfaangle=-38.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_027 ra=95300.00 dec=231400.00' 2008-Apr-27 19:16:21 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-27 19:16:22 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-27 19:16:22 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 238.55 -38.8 hcorcal 5 tracking no first 1 AGES3193_p2_027 95300.00 231400.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-27 19:16:22 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-27 19:16:22 LOG5 begin_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2008-Apr-27 19:16:22 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES3193_p2_025' 2008-Apr-27 19:16:22 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-27 19:16:22 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p2_027} 2008-Apr-27 19:16:22 INFO3 fixed_driftmap: Sending telescope to Az = 238.55 and ZA = 9.70 2008-Apr-27 19:16:22 LOG3 track_source: Calling 'track_source AGES3193_p2_027 238.55 9.7045196721 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-27 19:16:22 START begin_task: Starting task 'sending tracking commands' 2008-Apr-27 19:16:22 LOG5 begin_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2008-Apr-27 19:16:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_027} INFO {Slewing to source 'AGES3193_p2_027' ...} 2008-Apr-27 19:16:22 INFO1 track_source: Starting to track AGES3193_p2_027 2008-Apr-27 19:16:22 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_027" 2008-Apr-27 19:16:22 LOG3 vw_send: To DATATAKING: set ra 238.55 2008-Apr-27 19:16:22 LOG3 vw_send: To DATATAKING: set dec 9.7045196721 2008-Apr-27 19:16:22 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-27 19:16:22 LOG3 vw_send: To DATATAKING: pnt tr 238.55 9.7045196721 -CF 2008-Apr-27 19:16:22 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 19:16:22 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-27 19:16:22 LOG5 finish_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2008-Apr-27 19:16:22 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-27 19:16:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 19:16:22 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-27 19:16:22 LOG5 end_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2008-Apr-27 19:16:22 START begin_task: Starting task 'rotate ALFA to -38.8 degrees' 2008-Apr-27 19:16:22 LOG5 begin_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2008-Apr-27 19:16:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -38.8 degrees ...} 2008-Apr-27 19:16:22 INFO2 rotate_alfa: ALFA commanded to -38.8 degrees 2008-Apr-27 19:16:22 LOG3 sock_errsend: To ALFAMOTOR: POSITION -38.8 REPLY 2008-Apr-27 19:16:22 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-27 19:16:22 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-27 19:16:22 LOG5 begin_task: Level: (4) ID = <10136> Status = 0 0 0 0 ok 2008-Apr-27 19:16:22 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_027" 2008-Apr-27 19:16:22 LOG4 got_cormsg: From DATATAKING: set ra 238.55 2008-Apr-27 19:16:22 LOG4 got_cormsg: From DATATAKING: set dec 9.7045196721 2008-Apr-27 19:16:22 LOG4 got_cormsg: From DATATAKING: vw% 238.55 2008-Apr-27 19:16:22 LOG4 got_cormsg: From DATATAKING: vw% 9.7045196721 2008-Apr-27 19:16:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 19:16:22 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-27 19:16:22 LOG4 got_cormsg: From DATATAKING: pnt tr 238.55 9.7045196721 -CF 2008-Apr-27 19:16:22 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 19:16:22 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-27 19:16:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 19:16:31 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-27 19:16:31 INFO3 alfa_motor: ALFA rotator in-position -38.80 degrees 2008-Apr-27 19:16:31 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-27 19:16:31 LOG5 end_task: Level: (4) ID = <10136> Status = 0 0 0 0 ok 2008-Apr-27 19:16:31 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-27 19:16:31 STOP finish_task: Finishing task 'rotate ALFA to -38.8 degrees' 2008-Apr-27 19:16:31 LOG5 finish_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2008-Apr-27 19:16:31 INFO2 finish_task: DONE finished configuration: rotating ALFA to -38.8 degrees 2008-Apr-27 19:16:31 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 19:16:31 STOP end_task: Finishing task 'rotate ALFA to -38.8 degrees' with status 'OK' 2008-Apr-27 19:16:31 LOG5 end_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2008-Apr-27 19:16:31 START begin_task: Starting task 'waiting on telescope' 2008-Apr-27 19:16:31 LOG5 begin_task: Level: (3) ID = <10137> Status = 0 0 0 0 ok 2008-Apr-27 19:16:31 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-27 19:16:31 LOG3 waittrk: Start waittrk 5 2008-Apr-27 19:16:31 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-27 19:16:31 LOG5 begin_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2008-Apr-27 19:16:36 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-27 19:16:36 LOG5 end_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2008-Apr-27 19:16:36 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-27 19:16:36 LOG5 begin_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2008-Apr-27 19:18:30 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-27 19:18:30 LOG5 end_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2008-Apr-27 19:18:30 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-27 19:18:30 INFO2 waittrk: Now tracking AGES3193_p2_027 2008-Apr-27 19:18:30 LOG4 waittrk: Current telescope position: Az = 238.07 ZA = 9.71 2008-Apr-27 19:18:30 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-27 19:18:30 LOG5 finish_task: Level: (3) ID = <10137> Status = 0 0 0 0 ok 2008-Apr-27 19:18:30 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-27 19:18:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 19:18:30 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-27 19:18:30 LOG5 end_task: Level: (3) ID = <10137> Status = 0 0 0 0 ok 2008-Apr-27 19:18:30 START begin_task: Starting task 'selecting calibration type' 2008-Apr-27 19:18:30 LOG5 begin_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2008-Apr-27 19:18:31 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-27 19:18:31 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-27 19:18:31 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 19:18:31 START begin_task: Starting task 'waiting on setcal' 2008-Apr-27 19:18:31 LOG5 begin_task: Level: (4) ID = <10141> Status = 0 0 0 0 ok 2008-Apr-27 19:18:31 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-27 19:18:31 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 19:18:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 19:18:32 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-27 19:18:32 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-27 19:18:32 LOG5 end_task: Level: (4) ID = <10141> Status = 0 0 0 0 ok 2008-Apr-27 19:18:32 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-27 19:18:32 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 19:18:32 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-27 19:18:32 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 19:18:32 LOG5 begin_task: Level: (4) ID = <10142> Status = 0 0 0 0 ok 2008-Apr-27 19:18:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 19:18:32 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 19:18:32 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 19:18:32 LOG5 end_task: Level: (4) ID = <10142> Status = 0 0 0 0 ok 2008-Apr-27 19:18:32 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 19:18:32 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-27 19:18:32 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 19:18:32 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-27 19:18:32 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 19:18:32 LOG5 begin_task: Level: (4) ID = <10143> Status = 0 0 0 0 ok 2008-Apr-27 19:18:32 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 19:18:32 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 19:18:32 LOG5 end_task: Level: (4) ID = <10143> Status = 0 0 0 0 ok 2008-Apr-27 19:18:32 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 19:18:32 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-27 19:18:32 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-27 19:18:32 LOG5 finish_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2008-Apr-27 19:18:32 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-27 19:18:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 19:18:32 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-27 19:18:32 LOG5 end_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2008-Apr-27 19:18:32 LOG5 dopset_later: Calling 'dopset_later 45.294114154773325' 2008-Apr-27 19:18:32 INFO3 dopset_later: Setting Doppler correction for 19:19:16 (45.3 seconds from now) 2008-Apr-27 19:18:32 LOG5 antvel: Calling 'antvel 238.550000 9.704520 F 45.294114154773325' 2008-Apr-27 19:18:32 LOG2 antvel: Parameters to Doppler: Heliocentric 83956 2008 118 0.0 2008-Apr-27 19:18:32 INFO5 antvel: Computed antenna velocity: +28.03965 km/s 2008-Apr-27 19:18:32 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=28.039651629800002 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-27 19:18:32 INFO4 dopset_gen: New sky frequencies: 1381.114253 1381.114253 1381.114253 1381.114253 1381.114253 1381.114253 1381.114253 1381.114253 1381.114253 2008-Apr-27 19:18:32 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.114253 sky0=1381.114253 sky1=1381.114253 sky2=1381.114253 sky3=1381.114253 sky4=1381.114253 sky5=1381.114253 sky6=1381.114253 sky7=1381.114253 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-27 19:18:32 LOG2 dopset_gen: Result from 'sky2syn': 1631.114253 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-27 19:18:32 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631114253.0} 2008-Apr-27 19:18:32 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 19:18:32 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-27 19:18:32 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-27 19:18:32 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:18.8 Dec = +23:14:02.1 2008-Apr-27 19:18:32 LOG3 track_source: Calling 'track_source AGES3193_p2_027 095218.8 231402.1 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-27 19:18:32 START begin_task: Starting task 'sending tracking commands' 2008-Apr-27 19:18:32 LOG5 begin_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2008-Apr-27 19:18:32 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_027} INFO {Slewing to source 'AGES3193_p2_027' ...} 2008-Apr-27 19:18:32 INFO1 track_source: Starting to track AGES3193_p2_027 2008-Apr-27 19:18:32 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_027" 2008-Apr-27 19:18:32 LOG3 vw_send: To DATATAKING: set ra 095218.8 2008-Apr-27 19:18:32 LOG3 vw_send: To DATATAKING: set dec 231402.1 2008-Apr-27 19:18:32 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-27 19:18:32 LOG3 vw_send: To DATATAKING: pnt tr 095218.8 231402.1 -CJ 2008-Apr-27 19:18:32 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 19:18:32 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-27 19:18:32 LOG5 finish_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2008-Apr-27 19:18:32 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-27 19:18:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 19:18:32 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-27 19:18:32 LOG5 end_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2008-Apr-27 19:18:32 START begin_task: Starting task 'waiting on telescope' 2008-Apr-27 19:18:32 LOG5 begin_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2008-Apr-27 19:18:32 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-27 19:18:32 LOG3 waittrk: Start waittrk 5 2008-Apr-27 19:18:32 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-27 19:18:32 LOG5 begin_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2008-Apr-27 19:18:32 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631114253.0} 2008-Apr-27 19:18:32 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 19:18:32 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_027" 2008-Apr-27 19:18:32 LOG4 got_cormsg: From DATATAKING: set ra 095218.8 2008-Apr-27 19:18:32 LOG4 got_cormsg: From DATATAKING: set dec 231402.1 2008-Apr-27 19:18:32 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-27 19:18:32 LOG4 got_cormsg: From DATATAKING: vw% 095218.8 2008-Apr-27 19:18:32 LOG4 got_cormsg: From DATATAKING: vw% 231402.1 2008-Apr-27 19:18:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 19:18:32 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-27 19:18:32 LOG4 got_cormsg: From DATATAKING: pnt tr 095218.8 231402.1 -CJ 2008-Apr-27 19:18:32 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 19:18:32 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-27 19:18:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 19:18:37 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-27 19:18:37 LOG5 end_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2008-Apr-27 19:18:37 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-27 19:18:37 LOG5 begin_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2008-Apr-27 19:18:40 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-27 19:18:40 LOG5 end_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2008-Apr-27 19:18:40 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-27 19:18:40 INFO2 waittrk: Now tracking AGES3193_p2_027 2008-Apr-27 19:18:40 LOG4 waittrk: Current telescope position: Az = 238.02 ZA = 9.70 2008-Apr-27 19:18:40 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-27 19:18:40 LOG5 finish_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2008-Apr-27 19:18:40 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-27 19:18:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 19:18:40 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-27 19:18:40 LOG5 end_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2008-Apr-27 19:18:40 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-27 19:18:40 LOG5 begin_task: Level: (3) ID = <10148> Status = 0 0 0 0 ok 2008-Apr-27 19:18:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-27 19:18:40 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-27 19:18:40 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-27 19:18:40 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-27 19:18:40 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 19:18:40 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-27 19:18:40 LOG5 begin_task: Level: (4) ID = <10149> Status = 0 0 0 0 ok 2008-Apr-27 19:18:40 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-27 19:18:40 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 19:18:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 19:18:40 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-27 19:18:40 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-27 19:18:40 LOG5 end_task: Level: (4) ID = <10149> Status = 0 0 0 0 ok 2008-Apr-27 19:18:40 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-27 19:18:40 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-27 19:18:40 LOG5 begin_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2008-Apr-27 19:18:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-27 19:18:40 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-27 19:18:40 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-27 19:18:40 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-27 19:18:40 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-27 19:18:40 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-27 19:18:40 LOG5 begin_task: Level: (5) ID = <10151> Status = 0 0 0 0 ok 2008-Apr-27 19:18:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 19:18:40 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-27 19:18:40 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 1 dB --- beam 1: 7 6 dB 2008-Apr-27 19:18:40 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-27 19:18:40 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 6 dB 2008-Apr-27 19:18:40 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 3 3 dB 2008-Apr-27 19:18:41 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-27 19:18:41 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-27 19:18:41 LOG5 end_task: Level: (5) ID = <10151> Status = 0 0 0 0 ok 2008-Apr-27 19:18:41 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.899 0.968 ALFA beam 1: 1.100 1.018 2008-Apr-27 19:18:41 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.018 0.907 ALFA beam 3: 0.977 1.029 2008-Apr-27 19:18:41 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.908 0.947 ALFA beam 5: 1.036 0.912 2008-Apr-27 19:18:41 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.043 1.022 ALFA beam 7: 0.909 0.910 2008-Apr-27 19:18:41 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-27 19:18:41 LOG5 finish_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2008-Apr-27 19:18:41 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-27 19:18:41 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 19:18:41 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-27 19:18:41 LOG5 end_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2008-Apr-27 19:18:41 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-27 19:18:41 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-27 19:18:41 LOG5 finish_task: Level: (3) ID = <10148> Status = 0 0 0 0 ok 2008-Apr-27 19:18:41 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-27 19:18:41 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 19:18:41 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-27 19:18:41 LOG5 end_task: Level: (3) ID = <10148> Status = 0 0 0 0 ok 2008-Apr-27 19:18:41 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Steve Schnei 2008-Apr-27 19:18:41 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Steve Schnei 2008-Apr-27 19:18:41 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Steve Schnei 2008-Apr-27 19:18:41 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Steve Schnei 2008-Apr-27 19:18:41 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-27 19:18:41 START begin_task: Starting task 'WAPP calibration' 2008-Apr-27 19:18:41 LOG5 begin_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2008-Apr-27 19:18:41 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-27 19:18:41 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-27 19:18:41 START begin_task: Starting task 'selecting calibration type' 2008-Apr-27 19:18:41 LOG5 begin_task: Level: (4) ID = <10153> Status = 0 0 0 0 ok 2008-Apr-27 19:18:41 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-27 19:18:41 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-27 19:18:41 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 19:18:41 START begin_task: Starting task 'waiting on setcal' 2008-Apr-27 19:18:41 LOG5 begin_task: Level: (5) ID = <10154> Status = 0 0 0 0 ok 2008-Apr-27 19:18:41 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Steve Schnei' 2008-Apr-27 19:18:41 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-27 19:18:41 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 19:18:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 19:18:41 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-27 19:18:41 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-27 19:18:41 LOG5 end_task: Level: (5) ID = <10154> Status = 0 0 0 0 ok 2008-Apr-27 19:18:41 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-27 19:18:41 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 19:18:41 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-27 19:18:41 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 19:18:41 LOG5 begin_task: Level: (5) ID = <10155> Status = 0 0 0 0 ok 2008-Apr-27 19:18:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 19:18:41 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 19:18:41 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 19:18:41 LOG5 end_task: Level: (5) ID = <10155> Status = 0 0 0 0 ok 2008-Apr-27 19:18:41 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 19:18:41 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-27 19:18:41 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 19:18:41 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-27 19:18:41 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 19:18:41 LOG5 begin_task: Level: (5) ID = <10156> Status = 0 0 0 0 ok 2008-Apr-27 19:18:41 NOTE WAPPDATA-new_file: New FITS file: wapp.20080427.a2048.0002.fits 2008-Apr-27 19:18:41 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 19:18:41 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 19:18:41 LOG5 end_task: Level: (5) ID = <10156> Status = 0 0 0 0 ok 2008-Apr-27 19:18:42 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 19:18:42 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-27 19:18:42 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-27 19:18:42 LOG5 finish_task: Level: (4) ID = <10153> Status = 0 0 0 0 ok 2008-Apr-27 19:18:42 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-27 19:18:42 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 19:18:42 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-27 19:18:42 LOG5 end_task: Level: (4) ID = <10153> Status = 0 0 0 0 ok 2008-Apr-27 19:18:42 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-27 19:18:42 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-27 19:18:42 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-27 19:18:42 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-27 19:18:42 LOG5 begin_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2008-Apr-27 19:18:42 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080427.a2048.0002.fits} 2008-Apr-27 19:18:42 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-27 19:18:42 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-27 19:18:42 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-27 19:18:42 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-27 19:18:42 LOG5 end_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2008-Apr-27 19:18:42 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-27 19:18:42 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-27 19:18:42 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-27 19:18:42 LOG5 begin_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2008-Apr-27 19:18:42 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-27 19:18:42 LOG5 log_alfabeam: Parameters: 9.8718888888888898 23.233916666666669 9.281587 2008.3252693804345 -38.800095 2008-Apr-27 19:18:42 LOG4 log_alfabeam: ALFABEAM 0 9.871888888888881 23.233916666666669 2008-Apr-27 19:18:42 LOG4 log_alfabeam: ALFABEAM 1 9.872327694036978 23.140723348482467 2008-Apr-27 19:18:42 LOG4 log_alfabeam: ALFABEAM 2 9.878609553100835 23.202397594269840 2008-Apr-27 19:18:42 LOG4 log_alfabeam: ALFABEAM 3 9.878133777795902 23.296396385916367 2008-Apr-27 19:18:42 LOG4 log_alfabeam: ALFABEAM 4 9.871378802929812 23.327348601134918 2008-Apr-27 19:18:42 LOG4 log_alfabeam: ALFABEAM 5 9.865165539839721 23.264267471375266 2008-Apr-27 19:18:42 LOG4 log_alfabeam: ALFABEAM 6 9.865638167814621 23.171637300860066 2008-Apr-27 19:18:42 INFO2 take_spectra: Starting WAPP scan: 811800092 2008-Apr-27 19:18:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-27 19:18:42 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-27 19:18:42 LOG5 begin_task: Level: (5) ID = <10159> Status = 0 0 0 0 ok 2008-Apr-27 19:18:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 19:18:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83923.00 2008-Apr-27 19:18:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.114253 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 19:18:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.114253 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 19:18:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.114253 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 19:18:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.114253 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-27 19:18:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.114253 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 19:18:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.114253 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-27 19:18:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.114253 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-27 19:18:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.114253 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-27 19:18:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.114253 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-27 19:18:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 19:18:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.495 > 1.4)! 2008-Apr-27 19:18:48 LOG4 check_wapp_levels: WAPP-1 power levels: 1.238 1.249 1.495 1.396 2008-Apr-27 19:18:48 LOG4 check_wapp_levels: WAPP-2 power levels: 1.387 1.267 1.355 1.420 2008-Apr-27 19:18:48 LOG4 check_wapp_levels: WAPP-3 power levels: 1.272 1.325 1.438 1.221 2008-Apr-27 19:18:48 LOG4 check_wapp_levels: WAPP-4 power levels: 1.447 1.424 1.262 1.272 2008-Apr-27 19:18:48 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-27 19:18:48 LOG5 end_task: Level: (5) ID = <10159> Status = 0 0 0 0 ok 2008-Apr-27 19:18:48 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-27 19:18:48 LOG5 end_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2008-Apr-27 19:18:48 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-27 19:18:48 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-27 19:18:48 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-27 19:18:48 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-27 19:18:48 LOG5 begin_task: Level: (4) ID = <10160> Status = 0 0 0 0 ok 2008-Apr-27 19:18:48 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-27 19:18:48 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-27 19:18:48 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-27 19:18:48 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-27 19:18:48 LOG5 end_task: Level: (4) ID = <10160> Status = 0 0 0 0 ok 2008-Apr-27 19:18:48 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-27 19:18:48 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-27 19:18:48 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-27 19:18:48 LOG5 begin_task: Level: (4) ID = <10161> Status = 0 0 0 0 ok 2008-Apr-27 19:18:48 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-27 19:18:48 LOG5 log_alfabeam: Parameters: 9.8718888888888898 23.233916666666669 9.283537 2008.3252696022512 -38.800095 2008-Apr-27 19:18:48 LOG4 log_alfabeam: ALFABEAM 0 9.871888888888888 23.233916666666673 2008-Apr-27 19:18:48 LOG4 log_alfabeam: ALFABEAM 1 9.872337808539436 23.140732892753885 2008-Apr-27 19:18:48 LOG4 log_alfabeam: ALFABEAM 2 9.878613001212049 23.202536135818917 2008-Apr-27 19:18:48 LOG4 log_alfabeam: ALFABEAM 3 9.878126910810185 23.296526615916520 2008-Apr-27 19:18:48 LOG4 log_alfabeam: ALFABEAM 4 9.871368471740031 23.327338165628316 2008-Apr-27 19:18:48 LOG4 log_alfabeam: ALFABEAM 5 9.865162226586923 23.264126119260876 2008-Apr-27 19:18:48 LOG4 log_alfabeam: ALFABEAM 6 9.865644983324136 23.171507587569803 2008-Apr-27 19:18:48 INFO2 take_spectra: Starting WAPP scan: 811800093 2008-Apr-27 19:18:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-27 19:18:49 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-27 19:18:49 LOG5 begin_task: Level: (5) ID = <10162> Status = 0 0 0 0 ok 2008-Apr-27 19:18:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 19:18:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83930.00 2008-Apr-27 19:18:54 INFO5 check_wapp_levels: WAPP power levels are between 1.221 and 1.495 (still bad) 2008-Apr-27 19:18:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.114253 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 19:18:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.114253 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 19:18:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.114253 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 19:18:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.114253 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-27 19:18:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.114253 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 19:18:55 LOG3 WAPP=1+3+4-save_rfcalc: Channel 5: Sky freq = 1381.114253 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-27 19:18:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.114253 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-27 19:18:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.114253 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-27 19:18:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.114253 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-27 19:18:55 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-27 19:18:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 19:18:55 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-27 19:18:55 LOG5 end_task: Level: (5) ID = <10162> Status = 0 0 0 0 ok 2008-Apr-27 19:18:55 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-27 19:18:55 LOG5 end_task: Level: (4) ID = <10161> Status = 0 0 0 0 ok 2008-Apr-27 19:18:55 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-27 19:18:55 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-27 19:18:55 LOG5 finish_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2008-Apr-27 19:18:55 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-27 19:18:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 19:18:55 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-27 19:18:55 LOG5 end_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2008-Apr-27 19:18:55 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-27 19:18:55 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 238.55 and ZA = 9.70 2008-Apr-27 19:18:55 LOG3 track_source: Calling 'track_source AGES3193_p2_027 238.55 9.7045196721 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-27 19:18:55 START begin_task: Starting task 'sending tracking commands' 2008-Apr-27 19:18:55 LOG5 begin_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2008-Apr-27 19:18:55 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_027} INFO {Slewing to source 'AGES3193_p2_027' ...} 2008-Apr-27 19:18:55 INFO1 track_source: Starting to track AGES3193_p2_027 2008-Apr-27 19:18:55 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_027" 2008-Apr-27 19:18:55 LOG3 vw_send: To DATATAKING: set ra 238.55 2008-Apr-27 19:18:55 LOG3 vw_send: To DATATAKING: set dec 9.7045196721 2008-Apr-27 19:18:55 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-27 19:18:55 LOG3 vw_send: To DATATAKING: pnt tr 238.55 9.7045196721 -CF 2008-Apr-27 19:18:55 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 19:18:55 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-27 19:18:55 LOG5 finish_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2008-Apr-27 19:18:55 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-27 19:18:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 19:18:56 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-27 19:18:56 LOG5 end_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2008-Apr-27 19:18:56 LOG1 fixed_driftmap: Parameters: HA = -00:36:00.2 Start = 09:17:29.1 LST = 09:17:07.7 diff = 21.4 secs 2008-Apr-27 19:18:56 INFO2 fixed_driftmap: Waiting 19.4 seconds for RA 9:53:29 2008-Apr-27 19:18:56 INFO2 lstwait: Waiting for 19.3 secs from LST 09:17:08 to LST 09:17:27 ... 2008-Apr-27 19:18:56 LOG4 send_obs_status: To obs_status: <1> TASKTIME 19.302874931733324 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-27 19:18:56 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-27 19:18:56 LOG5 begin_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2008-Apr-27 19:18:56 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_027" 2008-Apr-27 19:18:56 LOG3 WAPP=2-save_rfcalc: Channel 5: Sky freq = 1381.114253 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-27 19:18:56 LOG4 got_cormsg: From DATATAKING: set ra 238.55 2008-Apr-27 19:18:56 LOG4 got_cormsg: From DATATAKING: set dec 9.7045196721 2008-Apr-27 19:18:56 LOG4 got_cormsg: From DATATAKING: vw% 238.55 2008-Apr-27 19:18:56 LOG4 got_cormsg: From DATATAKING: vw% 9.7045196721 2008-Apr-27 19:18:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 19:18:56 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-27 19:18:56 LOG4 got_cormsg: From DATATAKING: pnt tr 238.55 9.7045196721 -CF 2008-Apr-27 19:18:56 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 19:18:56 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-27 19:18:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 19:19:01 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.901 and 1.101 2008-Apr-27 19:19:15 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-27 19:19:15 LOG5 end_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2008-Apr-27 19:19:15 LOG4 lstwait: Finished waiting, the gui caused difference: 0.69987620000233619 2008-Apr-27 19:19:15 INFO3 lstwait: Finished waiting 2008-Apr-27 19:19:15 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-27 19:19:15 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-27 19:19:15 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-27 19:19:15 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-27 19:19:15 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-27 19:19:15 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-27 19:19:15 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-27 19:19:15 LOG5 begin_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2008-Apr-27 19:19:15 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-27 19:19:15 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-27 19:19:15 INFO2 take_spectra: Starting WAPP scan: 811800094 2008-Apr-27 19:19:16 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-27 19:19:16 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-27 19:19:16 LOG5 begin_task: Level: (4) ID = <10166> Status = 0 0 0 0 ok 2008-Apr-27 19:19:16 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 19:19:16 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83957.00 2008-Apr-27 19:19:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.114253 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 19:19:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.114253 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 19:19:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.114253 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 19:19:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.114253 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-27 19:19:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.114253 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 19:19:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.114253 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-27 19:19:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.114253 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-27 19:19:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.114253 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-27 19:19:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.114253 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-27 19:39:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 19:39:17 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-27 19:39:17 LOG5 end_task: Level: (4) ID = <10166> Status = 0 0 0 0 ok 2008-Apr-27 19:39:17 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-27 19:39:17 LOG5 end_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2008-Apr-27 19:39:17 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-27 19:39:17 LOG5 finish_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2008-Apr-27 19:39:17 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-27 19:39:17 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-27 19:39:17 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-27 19:39:17 LOG5 end_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2008-Apr-27 19:39:18 COMMAND run_command_line: EXECUTING command 15: 'FIXEDDRIFT az=211.83 alfaangle=-9.9 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_029 ra=95300.00 dec=231100.00' 2008-Apr-27 19:39:18 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-27 19:39:18 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-27 19:39:18 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 211.83 -9.9 hcorcal 5 tracking no first 1 AGES3193_p2_029 95300.00 231100.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-27 19:39:18 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-27 19:39:18 LOG5 begin_task: Level: (2) ID = <10167> Status = 0 0 0 0 ok 2008-Apr-27 19:39:18 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES3193_p2_027' 2008-Apr-27 19:39:18 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-27 19:39:18 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p2_029} 2008-Apr-27 19:39:18 INFO3 fixed_driftmap: Sending telescope to Az = 211.83 and ZA = 5.67 2008-Apr-27 19:39:18 LOG3 track_source: Calling 'track_source AGES3193_p2_029 211.83 5.6728170462 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-27 19:39:18 START begin_task: Starting task 'sending tracking commands' 2008-Apr-27 19:39:18 LOG5 begin_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2008-Apr-27 19:39:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_029} INFO {Slewing to source 'AGES3193_p2_029' ...} 2008-Apr-27 19:39:18 INFO1 track_source: Starting to track AGES3193_p2_029 2008-Apr-27 19:39:18 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_029" 2008-Apr-27 19:39:18 LOG3 vw_send: To DATATAKING: set ra 211.83 2008-Apr-27 19:39:18 LOG3 vw_send: To DATATAKING: set dec 5.6728170462 2008-Apr-27 19:39:18 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-27 19:39:18 LOG3 vw_send: To DATATAKING: pnt tr 211.83 5.6728170462 -CF 2008-Apr-27 19:39:18 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 19:39:18 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-27 19:39:18 LOG5 finish_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2008-Apr-27 19:39:18 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-27 19:39:18 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 19:39:18 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-27 19:39:18 LOG5 end_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2008-Apr-27 19:39:18 START begin_task: Starting task 'rotate ALFA to -9.9 degrees' 2008-Apr-27 19:39:18 LOG5 begin_task: Level: (3) ID = <10169> Status = 0 0 0 0 ok 2008-Apr-27 19:39:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -9.9 degrees ...} 2008-Apr-27 19:39:18 INFO2 rotate_alfa: ALFA commanded to -9.9 degrees 2008-Apr-27 19:39:18 LOG3 sock_errsend: To ALFAMOTOR: POSITION -9.9 REPLY 2008-Apr-27 19:39:18 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-27 19:39:18 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-27 19:39:18 LOG5 begin_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2008-Apr-27 19:39:18 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_029" 2008-Apr-27 19:39:18 LOG4 got_cormsg: From DATATAKING: set ra 211.83 2008-Apr-27 19:39:18 LOG4 got_cormsg: From DATATAKING: set dec 5.6728170462 2008-Apr-27 19:39:18 LOG4 got_cormsg: From DATATAKING: vw% 211.83 2008-Apr-27 19:39:18 LOG4 got_cormsg: From DATATAKING: vw% 5.6728170462 2008-Apr-27 19:39:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 19:39:18 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-27 19:39:18 LOG4 got_cormsg: From DATATAKING: pnt tr 211.83 5.6728170462 -CF 2008-Apr-27 19:39:18 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 19:39:18 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-27 19:39:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 19:39:36 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-27 19:39:36 INFO3 alfa_motor: ALFA rotator in-position -9.90 degrees 2008-Apr-27 19:39:36 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-27 19:39:36 LOG5 end_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2008-Apr-27 19:39:36 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-27 19:39:36 STOP finish_task: Finishing task 'rotate ALFA to -9.9 degrees' 2008-Apr-27 19:39:36 LOG5 finish_task: Level: (3) ID = <10169> Status = 0 0 0 0 ok 2008-Apr-27 19:39:36 INFO2 finish_task: DONE finished configuration: rotating ALFA to -9.9 degrees 2008-Apr-27 19:39:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 19:39:36 STOP end_task: Finishing task 'rotate ALFA to -9.9 degrees' with status 'OK' 2008-Apr-27 19:39:36 LOG5 end_task: Level: (3) ID = <10169> Status = 0 0 0 0 ok 2008-Apr-27 19:39:36 START begin_task: Starting task 'waiting on telescope' 2008-Apr-27 19:39:36 LOG5 begin_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2008-Apr-27 19:39:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-27 19:39:36 LOG3 waittrk: Start waittrk 5 2008-Apr-27 19:39:36 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-27 19:39:36 LOG5 begin_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2008-Apr-27 19:39:41 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-27 19:39:41 LOG5 end_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2008-Apr-27 19:39:41 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-27 19:39:41 LOG5 begin_task: Level: (4) ID = <10173> Status = 0 0 0 0 ok 2008-Apr-27 19:41:04 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-27 19:41:04 LOG5 end_task: Level: (4) ID = <10173> Status = 0 0 0 0 ok 2008-Apr-27 19:41:04 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-27 19:41:04 INFO2 waittrk: Now tracking AGES3193_p2_029 2008-Apr-27 19:41:04 LOG4 waittrk: Current telescope position: Az = 211.41 ZA = 5.69 2008-Apr-27 19:41:04 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-27 19:41:04 LOG5 finish_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2008-Apr-27 19:41:04 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-27 19:41:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 19:41:04 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-27 19:41:04 LOG5 end_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2008-Apr-27 19:41:04 START begin_task: Starting task 'selecting calibration type' 2008-Apr-27 19:41:04 LOG5 begin_task: Level: (3) ID = <10174> Status = 0 0 0 0 ok 2008-Apr-27 19:41:04 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-27 19:41:04 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-27 19:41:04 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 19:41:04 START begin_task: Starting task 'waiting on setcal' 2008-Apr-27 19:41:04 LOG5 begin_task: Level: (4) ID = <10175> Status = 0 0 0 0 ok 2008-Apr-27 19:41:04 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-27 19:41:04 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 19:41:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 19:41:05 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-27 19:41:05 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-27 19:41:05 LOG5 end_task: Level: (4) ID = <10175> Status = 0 0 0 0 ok 2008-Apr-27 19:41:05 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-27 19:41:05 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 19:41:05 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-27 19:41:05 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 19:41:05 LOG5 begin_task: Level: (4) ID = <10176> Status = 0 0 0 0 ok 2008-Apr-27 19:41:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 19:41:05 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 19:41:05 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 19:41:05 LOG5 end_task: Level: (4) ID = <10176> Status = 0 0 0 0 ok 2008-Apr-27 19:41:05 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 19:41:05 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-27 19:41:05 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 19:41:05 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-27 19:41:05 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 19:41:05 LOG5 begin_task: Level: (4) ID = <10177> Status = 0 0 0 0 ok 2008-Apr-27 19:41:05 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 19:41:05 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 19:41:05 LOG5 end_task: Level: (4) ID = <10177> Status = 0 0 0 0 ok 2008-Apr-27 19:41:05 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 19:41:05 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-27 19:41:05 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-27 19:41:05 LOG5 finish_task: Level: (3) ID = <10174> Status = 0 0 0 0 ok 2008-Apr-27 19:41:05 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-27 19:41:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 19:41:05 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-27 19:41:05 LOG5 end_task: Level: (3) ID = <10174> Status = 0 0 0 0 ok 2008-Apr-27 19:41:05 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2008-Apr-27 19:41:05 INFO2 astwait: Waiting for 8 seconds from 23:41:05 to 23:41:13 UTC ... 2008-Apr-27 19:41:05 LOG4 send_obs_status: To obs_status: <1> TASKTIME 8 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-27 19:41:05 START begin_task: Starting task 'waiting on waiting for AST time' 2008-Apr-27 19:41:05 LOG5 begin_task: Level: (3) ID = <10178> Status = 0 0 0 0 ok 2008-Apr-27 19:41:13 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2008-Apr-27 19:41:13 LOG5 end_task: Level: (3) ID = <10178> Status = 0 0 0 0 ok 2008-Apr-27 19:41:13 INFO3 astwait: Finished waiting 2008-Apr-27 19:41:13 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-27 19:41:13 LOG5 dopset_later: Calling 'dopset_later 60.691399265173487' 2008-Apr-27 19:41:13 INFO3 dopset_later: Setting Doppler correction for 19:42:13 (60.7 seconds from now) 2008-Apr-27 19:41:13 LOG5 antvel: Calling 'antvel 211.830000 5.672817 F 60.691399265173487' 2008-Apr-27 19:41:13 LOG2 antvel: Parameters to Doppler: Heliocentric 85333 2008 118 0.0 2008-Apr-27 19:41:13 INFO5 antvel: Computed antenna velocity: +28.08381 km/s 2008-Apr-27 19:41:13 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=28.0838118124 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-27 19:41:13 INFO4 dopset_gen: New sky frequencies: 1381.114049 1381.114049 1381.114049 1381.114049 1381.114049 1381.114049 1381.114049 1381.114049 1381.114049 2008-Apr-27 19:41:13 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.114049 sky0=1381.114049 sky1=1381.114049 sky2=1381.114049 sky3=1381.114049 sky4=1381.114049 sky5=1381.114049 sky6=1381.114049 sky7=1381.114049 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-27 19:41:13 LOG2 dopset_gen: Result from 'sky2syn': 1631.114049 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-27 19:41:13 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631114049.0} 2008-Apr-27 19:41:13 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 19:41:13 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-27 19:41:13 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-27 19:41:13 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:03.3 Dec = +23:11:02.0 2008-Apr-27 19:41:13 LOG3 track_source: Calling 'track_source AGES3193_p2_029 095203.3 231102.0 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-27 19:41:13 START begin_task: Starting task 'sending tracking commands' 2008-Apr-27 19:41:13 LOG5 begin_task: Level: (3) ID = <10179> Status = 0 0 0 0 ok 2008-Apr-27 19:41:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_029} INFO {Slewing to source 'AGES3193_p2_029' ...} 2008-Apr-27 19:41:13 INFO1 track_source: Starting to track AGES3193_p2_029 2008-Apr-27 19:41:13 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_029" 2008-Apr-27 19:41:13 LOG3 vw_send: To DATATAKING: set ra 095203.3 2008-Apr-27 19:41:13 LOG3 vw_send: To DATATAKING: set dec 231102.0 2008-Apr-27 19:41:13 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-27 19:41:13 LOG3 vw_send: To DATATAKING: pnt tr 095203.3 231102.0 -CJ 2008-Apr-27 19:41:13 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 19:41:13 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-27 19:41:13 LOG5 finish_task: Level: (3) ID = <10179> Status = 0 0 0 0 ok 2008-Apr-27 19:41:13 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-27 19:41:13 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 19:41:13 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-27 19:41:13 LOG5 end_task: Level: (3) ID = <10179> Status = 0 0 0 0 ok 2008-Apr-27 19:41:13 START begin_task: Starting task 'waiting on telescope' 2008-Apr-27 19:41:13 LOG5 begin_task: Level: (3) ID = <10180> Status = 0 0 0 0 ok 2008-Apr-27 19:41:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-27 19:41:13 LOG3 waittrk: Start waittrk 5 2008-Apr-27 19:41:13 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-27 19:41:13 LOG5 begin_task: Level: (4) ID = <10181> Status = 0 0 0 0 ok 2008-Apr-27 19:41:13 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631114049.0} 2008-Apr-27 19:41:13 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 19:41:13 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_029" 2008-Apr-27 19:41:13 LOG4 got_cormsg: From DATATAKING: set ra 095203.3 2008-Apr-27 19:41:13 LOG4 got_cormsg: From DATATAKING: set dec 231102.0 2008-Apr-27 19:41:13 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-27 19:41:13 LOG4 got_cormsg: From DATATAKING: vw% 095203.3 2008-Apr-27 19:41:13 LOG4 got_cormsg: From DATATAKING: vw% 231102.0 2008-Apr-27 19:41:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 19:41:13 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-27 19:41:13 LOG4 got_cormsg: From DATATAKING: pnt tr 095203.3 231102.0 -CJ 2008-Apr-27 19:41:13 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 19:41:13 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-27 19:41:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 19:41:18 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-27 19:41:18 LOG5 end_task: Level: (4) ID = <10181> Status = 0 0 0 0 ok 2008-Apr-27 19:41:18 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-27 19:41:18 LOG5 begin_task: Level: (4) ID = <10182> Status = 0 0 0 0 ok 2008-Apr-27 19:41:20 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-27 19:41:20 LOG5 end_task: Level: (4) ID = <10182> Status = 0 0 0 0 ok 2008-Apr-27 19:41:20 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-27 19:41:20 INFO2 waittrk: Now tracking AGES3193_p2_029 2008-Apr-27 19:41:20 LOG4 waittrk: Current telescope position: Az = 211.26 ZA = 5.68 2008-Apr-27 19:41:20 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-27 19:41:20 LOG5 finish_task: Level: (3) ID = <10180> Status = 0 0 0 0 ok 2008-Apr-27 19:41:20 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-27 19:41:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 19:41:20 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-27 19:41:20 LOG5 end_task: Level: (3) ID = <10180> Status = 0 0 0 0 ok 2008-Apr-27 19:41:20 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-27 19:41:20 LOG5 begin_task: Level: (3) ID = <10183> Status = 0 0 0 0 ok 2008-Apr-27 19:41:20 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-27 19:41:20 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-27 19:41:20 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-27 19:41:20 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-27 19:41:20 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 19:41:20 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-27 19:41:20 LOG5 begin_task: Level: (4) ID = <10184> Status = 0 0 0 0 ok 2008-Apr-27 19:41:20 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-27 19:41:20 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 19:41:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 19:41:21 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-27 19:41:21 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-27 19:41:21 LOG5 end_task: Level: (4) ID = <10184> Status = 0 0 0 0 ok 2008-Apr-27 19:41:21 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-27 19:41:21 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-27 19:41:21 LOG5 begin_task: Level: (4) ID = <10185> Status = 0 0 0 0 ok 2008-Apr-27 19:41:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-27 19:41:21 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-27 19:41:21 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-27 19:41:21 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-27 19:41:21 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-27 19:41:21 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-27 19:41:21 LOG5 begin_task: Level: (5) ID = <10186> Status = 0 0 0 0 ok 2008-Apr-27 19:41:21 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-27 19:41:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 19:41:21 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 1 dB --- beam 1: 7 6 dB 2008-Apr-27 19:41:21 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-27 19:41:21 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 5 dB 2008-Apr-27 19:41:21 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 2 2 dB 2008-Apr-27 19:41:21 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-27 19:41:21 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-27 19:41:21 LOG5 end_task: Level: (5) ID = <10186> Status = 0 0 0 0 ok 2008-Apr-27 19:41:21 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.090 0.967 ALFA beam 1: 1.076 1.015 2008-Apr-27 19:41:21 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.991 0.902 ALFA beam 3: 0.966 1.030 2008-Apr-27 19:41:21 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.903 0.944 ALFA beam 5: 1.001 1.123 2008-Apr-27 19:41:21 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.983 0.993 ALFA beam 7: 1.071 1.105 2008-Apr-27 19:41:21 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-27 19:41:21 LOG5 finish_task: Level: (4) ID = <10185> Status = 0 0 0 0 ok 2008-Apr-27 19:41:21 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-27 19:41:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 19:41:21 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-27 19:41:21 LOG5 end_task: Level: (4) ID = <10185> Status = 0 0 0 0 ok 2008-Apr-27 19:41:21 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-27 19:41:21 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-27 19:41:21 LOG5 finish_task: Level: (3) ID = <10183> Status = 0 0 0 0 ok 2008-Apr-27 19:41:21 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-27 19:41:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 19:41:22 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-27 19:41:22 LOG5 end_task: Level: (3) ID = <10183> Status = 0 0 0 0 ok 2008-Apr-27 19:41:22 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Steve Schnei 2008-Apr-27 19:41:22 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Steve Schnei 2008-Apr-27 19:41:22 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Steve Schnei 2008-Apr-27 19:41:22 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Steve Schnei 2008-Apr-27 19:41:22 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-27 19:41:22 START begin_task: Starting task 'WAPP calibration' 2008-Apr-27 19:41:22 LOG5 begin_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2008-Apr-27 19:41:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-27 19:41:22 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-27 19:41:22 START begin_task: Starting task 'selecting calibration type' 2008-Apr-27 19:41:22 LOG5 begin_task: Level: (4) ID = <10188> Status = 0 0 0 0 ok 2008-Apr-27 19:41:22 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-27 19:41:22 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-27 19:41:22 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 19:41:22 START begin_task: Starting task 'waiting on setcal' 2008-Apr-27 19:41:22 LOG5 begin_task: Level: (5) ID = <10189> Status = 0 0 0 0 ok 2008-Apr-27 19:41:22 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Steve Schnei' 2008-Apr-27 19:41:22 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-27 19:41:22 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 19:41:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 19:41:22 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-27 19:41:22 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-27 19:41:22 LOG5 end_task: Level: (5) ID = <10189> Status = 0 0 0 0 ok 2008-Apr-27 19:41:22 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-27 19:41:22 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 19:41:22 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-27 19:41:22 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 19:41:22 LOG5 begin_task: Level: (5) ID = <10190> Status = 0 0 0 0 ok 2008-Apr-27 19:41:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 19:41:22 NOTE WAPPDATA-new_file: New FITS file: wapp.20080427.a2048.0003.fits 2008-Apr-27 19:41:22 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080427.a2048.0003.fits} 2008-Apr-27 19:41:23 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 19:41:23 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 19:41:23 LOG5 end_task: Level: (5) ID = <10190> Status = 0 0 0 0 ok 2008-Apr-27 19:41:23 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 19:41:23 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-27 19:41:23 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 19:41:23 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-27 19:41:23 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 19:41:23 LOG5 begin_task: Level: (5) ID = <10191> Status = 0 0 0 0 ok 2008-Apr-27 19:41:23 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 19:41:23 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 19:41:23 LOG5 end_task: Level: (5) ID = <10191> Status = 0 0 0 0 ok 2008-Apr-27 19:41:23 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 19:41:23 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-27 19:41:23 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-27 19:41:23 LOG5 finish_task: Level: (4) ID = <10188> Status = 0 0 0 0 ok 2008-Apr-27 19:41:23 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-27 19:41:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 19:41:23 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-27 19:41:23 LOG5 end_task: Level: (4) ID = <10188> Status = 0 0 0 0 ok 2008-Apr-27 19:41:23 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-27 19:41:23 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-27 19:41:23 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-27 19:41:23 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-27 19:41:23 LOG5 begin_task: Level: (4) ID = <10192> Status = 0 0 0 0 ok 2008-Apr-27 19:41:23 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-27 19:41:23 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-27 19:41:23 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-27 19:41:23 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-27 19:41:23 LOG5 end_task: Level: (4) ID = <10192> Status = 0 0 0 0 ok 2008-Apr-27 19:41:23 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-27 19:41:23 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-27 19:41:23 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-27 19:41:23 LOG5 begin_task: Level: (4) ID = <10193> Status = 0 0 0 0 ok 2008-Apr-27 19:41:23 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-27 19:41:23 LOG5 log_alfabeam: Parameters: 9.867583333333334 23.183888888888887 9.660956 2008.3253125396102 -9.900027 2008-Apr-27 19:41:23 LOG4 log_alfabeam: ALFABEAM 0 9.867583333333325 23.183888888888902 2008-Apr-27 19:41:23 LOG4 log_alfabeam: ALFABEAM 1 9.867894195531640 23.083558429323901 2008-Apr-27 19:41:23 LOG4 log_alfabeam: ALFABEAM 2 9.873785875087716 23.149918304073562 2008-Apr-27 19:41:23 LOG4 log_alfabeam: ALFABEAM 3 9.873456833197698 23.250841901521440 2008-Apr-27 19:41:23 LOG4 log_alfabeam: ALFABEAM 4 9.867144960391380 23.284622339946420 2008-Apr-27 19:41:23 LOG4 log_alfabeam: ALFABEAM 5 9.861357282924514 23.216287714979465 2008-Apr-27 19:41:24 LOG4 log_alfabeam: ALFABEAM 6 9.861776601062587 23.116142205230197 2008-Apr-27 19:41:24 INFO2 take_spectra: Starting WAPP scan: 811800095 2008-Apr-27 19:41:24 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-27 19:41:24 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-27 19:41:24 LOG5 begin_task: Level: (5) ID = <10194> Status = 0 0 0 0 ok 2008-Apr-27 19:41:24 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 19:41:24 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85285.00 2008-Apr-27 19:41:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.114049 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 19:41:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.114049 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 19:41:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.114049 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 19:41:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.114049 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-27 19:41:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.114049 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 19:41:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.114049 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-27 19:41:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.114049 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-27 19:41:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.114049 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-27 19:41:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.114049 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-27 19:41:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 19:41:30 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-27 19:41:30 LOG5 end_task: Level: (5) ID = <10194> Status = 0 0 0 0 ok 2008-Apr-27 19:41:30 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-27 19:41:30 LOG5 end_task: Level: (4) ID = <10193> Status = 0 0 0 0 ok 2008-Apr-27 19:41:30 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-27 19:41:30 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-27 19:41:30 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-27 19:41:30 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-27 19:41:30 LOG5 begin_task: Level: (4) ID = <10195> Status = 0 0 0 0 ok 2008-Apr-27 19:41:30 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-27 19:41:30 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-27 19:41:30 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-27 19:41:30 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-27 19:41:30 LOG5 end_task: Level: (4) ID = <10195> Status = 0 0 0 0 ok 2008-Apr-27 19:41:30 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-27 19:41:30 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-27 19:41:30 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-27 19:41:30 LOG5 begin_task: Level: (4) ID = <10196> Status = 0 0 0 0 ok 2008-Apr-27 19:41:30 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-27 19:41:30 LOG5 log_alfabeam: Parameters: 9.867583333333334 23.183888888888887 9.662906 2008.3253127614269 -9.900027 2008-Apr-27 19:41:30 LOG4 log_alfabeam: ALFABEAM 0 9.867583333333338 23.183888888888880 2008-Apr-27 19:41:30 LOG4 log_alfabeam: ALFABEAM 1 9.867924562278292 23.083577846982994 2008-Apr-27 19:41:30 LOG4 log_alfabeam: ALFABEAM 2 9.873796144393346 23.150275793939340 2008-Apr-27 19:41:30 LOG4 log_alfabeam: ALFABEAM 3 9.873436466531844 23.251180444077715 2008-Apr-27 19:41:30 LOG4 log_alfabeam: ALFABEAM 4 9.867114097707242 23.284596556973497 2008-Apr-27 19:41:30 LOG4 log_alfabeam: ALFABEAM 5 9.861347452692101 23.215924955016163 2008-Apr-27 19:41:30 LOG4 log_alfabeam: ALFABEAM 6 9.861797360750618 23.115805618828286 2008-Apr-27 19:41:30 INFO2 take_spectra: Starting WAPP scan: 811800096 2008-Apr-27 19:41:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-27 19:41:31 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-27 19:41:31 LOG5 begin_task: Level: (5) ID = <10197> Status = 0 0 0 0 ok 2008-Apr-27 19:41:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 19:41:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.565 > 1.4)! 2008-Apr-27 19:41:31 LOG4 check_wapp_levels: WAPP-1 power levels: 1.090 0.967 1.076 1.015 2008-Apr-27 19:41:31 LOG4 check_wapp_levels: WAPP-2 power levels: 0.991 0.902 0.966 1.030 2008-Apr-27 19:41:31 LOG4 check_wapp_levels: WAPP-3 power levels: 0.903 0.944 1.001 1.123 2008-Apr-27 19:41:31 LOG4 check_wapp_levels: WAPP-4 power levels: 1.392 1.408 1.518 1.565 2008-Apr-27 19:41:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85292.00 2008-Apr-27 19:41:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.114049 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 19:41:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.114049 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 19:41:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.114049 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 19:41:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.114049 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-27 19:41:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.114049 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 19:41:37 INFO5 check_wapp_levels: WAPP power levels are between 1.243 and 1.565 (still bad) 2008-Apr-27 19:41:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.114049 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-27 19:41:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.114049 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-27 19:41:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.114049 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-27 19:41:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.114049 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-27 19:41:37 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-27 19:41:37 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 19:41:37 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-27 19:41:37 LOG5 end_task: Level: (5) ID = <10197> Status = 0 0 0 0 ok 2008-Apr-27 19:41:37 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-27 19:41:37 LOG5 end_task: Level: (4) ID = <10196> Status = 0 0 0 0 ok 2008-Apr-27 19:41:37 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-27 19:41:37 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-27 19:41:37 LOG5 finish_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2008-Apr-27 19:41:37 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-27 19:41:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 19:41:37 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-27 19:41:37 LOG5 end_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2008-Apr-27 19:41:37 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-27 19:41:37 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 211.83 and ZA = 5.67 2008-Apr-27 19:41:37 LOG3 track_source: Calling 'track_source AGES3193_p2_029 211.83 5.6728170462 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-27 19:41:37 START begin_task: Starting task 'sending tracking commands' 2008-Apr-27 19:41:37 LOG5 begin_task: Level: (3) ID = <10198> Status = 0 0 0 0 ok 2008-Apr-27 19:41:37 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_029} INFO {Slewing to source 'AGES3193_p2_029' ...} 2008-Apr-27 19:41:37 INFO1 track_source: Starting to track AGES3193_p2_029 2008-Apr-27 19:41:37 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_029" 2008-Apr-27 19:41:37 LOG3 vw_send: To DATATAKING: set ra 211.83 2008-Apr-27 19:41:37 LOG3 vw_send: To DATATAKING: set dec 5.6728170462 2008-Apr-27 19:41:37 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-27 19:41:37 LOG3 vw_send: To DATATAKING: pnt tr 211.83 5.6728170462 -CF 2008-Apr-27 19:41:37 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 19:41:37 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-27 19:41:37 LOG5 finish_task: Level: (3) ID = <10198> Status = 0 0 0 0 ok 2008-Apr-27 19:41:37 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-27 19:41:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 19:41:38 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-27 19:41:38 LOG5 end_task: Level: (3) ID = <10198> Status = 0 0 0 0 ok 2008-Apr-27 19:41:38 LOG1 fixed_driftmap: Parameters: HA = -00:13:00.0 Start = 09:40:29.3 LST = 09:39:53.5 diff = 35.8 secs 2008-Apr-27 19:41:38 INFO2 fixed_driftmap: Waiting 33.8 seconds for RA 9:53:29 2008-Apr-27 19:41:38 INFO2 lstwait: Waiting for 33.7 secs from LST 09:39:53 to LST 09:40:27 ... 2008-Apr-27 19:41:38 LOG4 send_obs_status: To obs_status: <1> TASKTIME 33.694912285333281 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-27 19:41:38 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-27 19:41:38 LOG5 begin_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2008-Apr-27 19:41:38 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_029" 2008-Apr-27 19:41:38 LOG4 got_cormsg: From DATATAKING: set ra 211.83 2008-Apr-27 19:41:38 LOG4 got_cormsg: From DATATAKING: set dec 5.6728170462 2008-Apr-27 19:41:38 LOG4 got_cormsg: From DATATAKING: vw% 211.83 2008-Apr-27 19:41:38 LOG4 got_cormsg: From DATATAKING: vw% 5.6728170462 2008-Apr-27 19:41:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 19:41:38 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-27 19:41:38 LOG4 got_cormsg: From DATATAKING: pnt tr 211.83 5.6728170462 -CF 2008-Apr-27 19:41:38 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 19:41:38 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-27 19:41:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 19:41:43 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.900 and 1.125 2008-Apr-27 19:42:11 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-27 19:42:11 LOG5 end_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2008-Apr-27 19:42:11 LOG4 lstwait: Finished waiting, the gui caused difference: 0.30483524000715079 2008-Apr-27 19:42:11 INFO3 lstwait: Finished waiting 2008-Apr-27 19:42:11 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-27 19:42:11 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-27 19:42:11 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-27 19:42:11 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-27 19:42:11 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-27 19:42:11 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-27 19:42:11 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-27 19:42:11 LOG5 begin_task: Level: (3) ID = <10200> Status = 0 0 0 0 ok 2008-Apr-27 19:42:11 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-27 19:42:11 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-27 19:42:11 INFO2 take_spectra: Starting WAPP scan: 811800097 2008-Apr-27 19:42:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-27 19:42:12 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-27 19:42:12 LOG5 begin_task: Level: (4) ID = <10201> Status = 0 0 0 0 ok 2008-Apr-27 19:42:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 19:42:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85333.00 2008-Apr-27 19:42:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.114049 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 19:42:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.114049 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 19:42:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.114049 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 19:42:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.114049 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-27 19:42:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.114049 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 19:42:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.114049 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-27 19:42:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.114049 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-27 19:42:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.114049 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-27 19:42:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.114049 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-27 20:02:13 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 20:02:13 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-27 20:02:13 LOG5 end_task: Level: (4) ID = <10201> Status = 0 0 0 0 ok 2008-Apr-27 20:02:13 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-27 20:02:13 LOG5 end_task: Level: (3) ID = <10200> Status = 0 0 0 0 ok 2008-Apr-27 20:02:13 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-27 20:02:13 LOG5 finish_task: Level: (2) ID = <10167> Status = 0 0 0 0 ok 2008-Apr-27 20:02:13 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-27 20:02:13 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-27 20:02:13 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-27 20:02:13 LOG5 end_task: Level: (2) ID = <10167> Status = 0 0 0 0 ok 2008-Apr-27 20:02:13 COMMAND run_command_line: EXECUTING command 19: 'FIXEDDRIFT az=147.89 alfaangle=48.5 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_031 ra=95300.00 dec=230800.00' 2008-Apr-27 20:02:14 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-27 20:02:14 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-27 20:02:14 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 147.89 48.5 hcorcal 5 tracking no first 1 AGES3193_p2_031 95300.00 230800.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-27 20:02:14 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-27 20:02:14 LOG5 begin_task: Level: (2) ID = <10202> Status = 0 0 0 0 ok 2008-Apr-27 20:02:14 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES3193_p2_029' 2008-Apr-27 20:02:14 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-27 20:02:14 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p2_031} 2008-Apr-27 20:02:14 INFO3 fixed_driftmap: Sending telescope to Az = 147.89 and ZA = 5.63 2008-Apr-27 20:02:14 LOG3 track_source: Calling 'track_source AGES3193_p2_031 147.89 5.6311025800 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-27 20:02:14 START begin_task: Starting task 'sending tracking commands' 2008-Apr-27 20:02:14 LOG5 begin_task: Level: (3) ID = <10203> Status = 0 0 0 0 ok 2008-Apr-27 20:02:14 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_031} INFO {Slewing to source 'AGES3193_p2_031' ...} 2008-Apr-27 20:02:14 INFO1 track_source: Starting to track AGES3193_p2_031 2008-Apr-27 20:02:14 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_031" 2008-Apr-27 20:02:14 LOG3 vw_send: To DATATAKING: set ra 147.89 2008-Apr-27 20:02:14 LOG3 vw_send: To DATATAKING: set dec 5.6311025800 2008-Apr-27 20:02:14 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-27 20:02:14 LOG3 vw_send: To DATATAKING: pnt tr 147.89 5.6311025800 -CF 2008-Apr-27 20:02:14 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 20:02:14 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-27 20:02:14 LOG5 finish_task: Level: (3) ID = <10203> Status = 0 0 0 0 ok 2008-Apr-27 20:02:14 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-27 20:02:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 20:02:14 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-27 20:02:14 LOG5 end_task: Level: (3) ID = <10203> Status = 0 0 0 0 ok 2008-Apr-27 20:02:14 START begin_task: Starting task 'rotate ALFA to +48.5 degrees' 2008-Apr-27 20:02:14 LOG5 begin_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2008-Apr-27 20:02:14 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +48.5 degrees ...} 2008-Apr-27 20:02:14 INFO2 rotate_alfa: ALFA commanded to +48.5 degrees 2008-Apr-27 20:02:14 LOG3 sock_errsend: To ALFAMOTOR: POSITION 48.5 REPLY 2008-Apr-27 20:02:14 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-27 20:02:14 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-27 20:02:14 LOG5 begin_task: Level: (4) ID = <10205> Status = 0 0 0 0 ok 2008-Apr-27 20:02:14 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_031" 2008-Apr-27 20:02:14 LOG4 got_cormsg: From DATATAKING: set ra 147.89 2008-Apr-27 20:02:14 LOG4 got_cormsg: From DATATAKING: set dec 5.6311025800 2008-Apr-27 20:02:14 LOG4 got_cormsg: From DATATAKING: vw% 147.89 2008-Apr-27 20:02:14 LOG4 got_cormsg: From DATATAKING: vw% 5.6311025800 2008-Apr-27 20:02:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 20:02:14 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-27 20:02:14 LOG4 got_cormsg: From DATATAKING: pnt tr 147.89 5.6311025800 -CF 2008-Apr-27 20:02:14 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 20:02:14 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2008-Apr-27 20:02:48 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-27 20:02:48 INFO3 alfa_motor: ALFA rotator in-position +48.50 degrees 2008-Apr-27 20:02:48 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-27 20:02:48 LOG5 end_task: Level: (4) ID = <10205> Status = 0 0 0 0 ok 2008-Apr-27 20:02:48 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-27 20:02:48 STOP finish_task: Finishing task 'rotate ALFA to +48.5 degrees' 2008-Apr-27 20:02:48 LOG5 finish_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2008-Apr-27 20:02:48 INFO2 finish_task: DONE finished configuration: rotating ALFA to +48.5 degrees 2008-Apr-27 20:02:48 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 20:02:48 STOP end_task: Finishing task 'rotate ALFA to +48.5 degrees' with status 'OK' 2008-Apr-27 20:02:48 LOG5 end_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2008-Apr-27 20:02:48 START begin_task: Starting task 'waiting on telescope' 2008-Apr-27 20:02:48 LOG5 begin_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2008-Apr-27 20:02:48 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-27 20:02:48 LOG3 waittrk: Start waittrk 5 2008-Apr-27 20:02:48 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-27 20:02:48 LOG5 begin_task: Level: (4) ID = <10207> Status = 0 0 0 0 ok 2008-Apr-27 20:02:53 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-27 20:02:53 LOG5 end_task: Level: (4) ID = <10207> Status = 0 0 0 0 ok 2008-Apr-27 20:02:53 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-27 20:02:53 LOG5 begin_task: Level: (4) ID = <10208> Status = 0 0 0 0 ok 2008-Apr-27 20:03:44 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 20:03:44.296 (seconds: 72224.296)!} 2008-Apr-27 20:03:44 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 20:03:44.296 (seconds: 72224.296)! 2008-Apr-27 20:04:59 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-27 20:04:59 LOG5 end_task: Level: (4) ID = <10208> Status = 0 0 0 0 ok 2008-Apr-27 20:04:59 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-27 20:04:59 INFO2 waittrk: Now tracking AGES3193_p2_031 2008-Apr-27 20:04:59 LOG4 waittrk: Current telescope position: Az = 147.68 ZA = 5.64 2008-Apr-27 20:04:59 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-27 20:04:59 LOG5 finish_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2008-Apr-27 20:04:59 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-27 20:04:59 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 20:04:59 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-27 20:04:59 LOG5 end_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2008-Apr-27 20:04:59 START begin_task: Starting task 'selecting calibration type' 2008-Apr-27 20:04:59 LOG5 begin_task: Level: (3) ID = <10209> Status = 0 0 0 0 ok 2008-Apr-27 20:04:59 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-27 20:04:59 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-27 20:04:59 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 20:04:59 START begin_task: Starting task 'waiting on setcal' 2008-Apr-27 20:04:59 LOG5 begin_task: Level: (4) ID = <10210> Status = 0 0 0 0 ok 2008-Apr-27 20:05:00 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-27 20:05:00 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 20:05:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 20:05:01 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-27 20:05:01 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-27 20:05:01 LOG5 end_task: Level: (4) ID = <10210> Status = 0 0 0 0 ok 2008-Apr-27 20:05:01 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-27 20:05:01 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 20:05:01 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-27 20:05:01 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 20:05:01 LOG5 begin_task: Level: (4) ID = <10211> Status = 0 0 0 0 ok 2008-Apr-27 20:05:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 20:05:01 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 20:05:01 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 20:05:01 LOG5 end_task: Level: (4) ID = <10211> Status = 0 0 0 0 ok 2008-Apr-27 20:05:01 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 20:05:01 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-27 20:05:01 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 20:05:01 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-27 20:05:01 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 20:05:01 LOG5 begin_task: Level: (4) ID = <10212> Status = 0 0 0 0 ok 2008-Apr-27 20:05:01 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 20:05:01 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 20:05:01 LOG5 end_task: Level: (4) ID = <10212> Status = 0 0 0 0 ok 2008-Apr-27 20:05:01 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 20:05:01 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-27 20:05:01 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-27 20:05:01 LOG5 finish_task: Level: (3) ID = <10209> Status = 0 0 0 0 ok 2008-Apr-27 20:05:01 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-27 20:05:01 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 20:05:01 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-27 20:05:01 LOG5 end_task: Level: (3) ID = <10209> Status = 0 0 0 0 ok 2008-Apr-27 20:05:01 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2008-Apr-27 20:05:01 INFO2 astwait: Waiting for 128 seconds from 00:05:01 to 00:07:09 UTC ... 2008-Apr-27 20:05:01 LOG4 send_obs_status: To obs_status: <1> TASKTIME 128 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-27 20:05:01 START begin_task: Starting task 'waiting on waiting for AST time' 2008-Apr-27 20:05:01 LOG5 begin_task: Level: (3) ID = <10213> Status = 0 0 0 0 ok 2008-Apr-27 20:07:09 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2008-Apr-27 20:07:09 LOG5 end_task: Level: (3) ID = <10213> Status = 0 0 0 0 ok 2008-Apr-27 20:07:09 INFO3 astwait: Finished waiting 2008-Apr-27 20:07:09 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-27 20:07:09 LOG5 dopset_later: Calling 'dopset_later 60.573349430931003' 2008-Apr-27 20:07:09 INFO3 dopset_later: Setting Doppler correction for 20:08:09 (60.6 seconds from now) 2008-Apr-27 20:07:09 LOG5 antvel: Calling 'antvel 147.890000 5.631103 F 60.573349430931003' 2008-Apr-27 20:07:09 LOG2 antvel: Parameters to Doppler: Heliocentric 86889 2008 118 0.0 2008-Apr-27 20:07:09 INFO5 antvel: Computed antenna velocity: +28.13375 km/s 2008-Apr-27 20:07:09 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=28.133748951099999 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-27 20:07:09 INFO4 dopset_gen: New sky frequencies: 1381.113819 1381.113819 1381.113819 1381.113819 1381.113819 1381.113819 1381.113819 1381.113819 1381.113819 2008-Apr-27 20:07:09 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.113819 sky0=1381.113819 sky1=1381.113819 sky2=1381.113819 sky3=1381.113819 sky4=1381.113819 sky5=1381.113819 sky6=1381.113819 sky7=1381.113819 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-27 20:07:09 LOG2 dopset_gen: Result from 'sky2syn': 1631.113819 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-27 20:07:09 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631113819.0} 2008-Apr-27 20:07:09 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 20:07:09 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-27 20:07:09 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-27 20:07:09 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:03.4 Dec = +23:08:02.0 2008-Apr-27 20:07:09 LOG3 track_source: Calling 'track_source AGES3193_p2_031 095203.4 230802.0 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-27 20:07:09 START begin_task: Starting task 'sending tracking commands' 2008-Apr-27 20:07:09 LOG5 begin_task: Level: (3) ID = <10214> Status = 0 0 0 0 ok 2008-Apr-27 20:07:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_031} INFO {Slewing to source 'AGES3193_p2_031' ...} 2008-Apr-27 20:07:09 INFO1 track_source: Starting to track AGES3193_p2_031 2008-Apr-27 20:07:09 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_031" 2008-Apr-27 20:07:09 LOG3 vw_send: To DATATAKING: set ra 095203.4 2008-Apr-27 20:07:09 LOG3 vw_send: To DATATAKING: set dec 230802.0 2008-Apr-27 20:07:09 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-27 20:07:09 LOG3 vw_send: To DATATAKING: pnt tr 095203.4 230802.0 -CJ 2008-Apr-27 20:07:09 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 20:07:09 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-27 20:07:09 LOG5 finish_task: Level: (3) ID = <10214> Status = 0 0 0 0 ok 2008-Apr-27 20:07:09 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-27 20:07:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 20:07:09 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-27 20:07:09 LOG5 end_task: Level: (3) ID = <10214> Status = 0 0 0 0 ok 2008-Apr-27 20:07:09 START begin_task: Starting task 'waiting on telescope' 2008-Apr-27 20:07:09 LOG5 begin_task: Level: (3) ID = <10215> Status = 0 0 0 0 ok 2008-Apr-27 20:07:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-27 20:07:09 LOG3 waittrk: Start waittrk 5 2008-Apr-27 20:07:09 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-27 20:07:09 LOG5 begin_task: Level: (4) ID = <10216> Status = 0 0 0 0 ok 2008-Apr-27 20:07:09 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631113819.0} 2008-Apr-27 20:07:09 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 20:07:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 20:07:09 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_031" 2008-Apr-27 20:07:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 20:07:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 20:07:09 LOG4 got_cormsg: From DATATAKING: set ra 095203.4 2008-Apr-27 20:07:09 LOG4 got_cormsg: From DATATAKING: set dec 230802.0 2008-Apr-27 20:07:09 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-27 20:07:09 LOG4 got_cormsg: From DATATAKING: pnt tr 095203.4 230802.0 -CJ 2008-Apr-27 20:07:09 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 20:07:09 LOG4 got_cormsg: From DATATAKING: 095203.4 2008-Apr-27 20:07:09 LOG4 got_cormsg: From DATATAKING: vw% 230802.0 2008-Apr-27 20:07:09 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2008-Apr-27 20:07:14 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-27 20:07:14 LOG5 end_task: Level: (4) ID = <10216> Status = 0 0 0 0 ok 2008-Apr-27 20:07:14 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-27 20:07:14 LOG5 begin_task: Level: (4) ID = <10217> Status = 0 0 0 0 ok 2008-Apr-27 20:07:16 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-27 20:07:16 LOG5 end_task: Level: (4) ID = <10217> Status = 0 0 0 0 ok 2008-Apr-27 20:07:16 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-27 20:07:16 INFO2 waittrk: Now tracking AGES3193_p2_031 2008-Apr-27 20:07:16 LOG4 waittrk: Current telescope position: Az = 147.54 ZA = 5.65 2008-Apr-27 20:07:16 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-27 20:07:16 LOG5 finish_task: Level: (3) ID = <10215> Status = 0 0 0 0 ok 2008-Apr-27 20:07:16 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-27 20:07:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 20:07:16 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-27 20:07:16 LOG5 end_task: Level: (3) ID = <10215> Status = 0 0 0 0 ok 2008-Apr-27 20:07:16 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-27 20:07:16 LOG5 begin_task: Level: (3) ID = <10218> Status = 0 0 0 0 ok 2008-Apr-27 20:07:16 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-27 20:07:16 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-27 20:07:16 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-27 20:07:16 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-27 20:07:16 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 20:07:16 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-27 20:07:16 LOG5 begin_task: Level: (4) ID = <10219> Status = 0 0 0 0 ok 2008-Apr-27 20:07:16 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-27 20:07:16 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 20:07:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 20:07:17 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-27 20:07:17 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-27 20:07:17 LOG5 end_task: Level: (4) ID = <10219> Status = 0 0 0 0 ok 2008-Apr-27 20:07:17 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-27 20:07:17 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-27 20:07:17 LOG5 begin_task: Level: (4) ID = <10220> Status = 0 0 0 0 ok 2008-Apr-27 20:07:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-27 20:07:17 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-27 20:07:17 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-27 20:07:17 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-27 20:07:17 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-27 20:07:17 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-27 20:07:17 LOG5 begin_task: Level: (5) ID = <10221> Status = 0 0 0 0 ok 2008-Apr-27 20:07:17 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-27 20:07:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 20:07:17 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 1 dB --- beam 1: 7 6 dB 2008-Apr-27 20:07:17 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-27 20:07:17 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 6 dB 2008-Apr-27 20:07:17 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 2 2 dB 2008-Apr-27 20:07:17 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-27 20:07:17 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-27 20:07:17 LOG5 end_task: Level: (5) ID = <10221> Status = 0 0 0 0 ok 2008-Apr-27 20:07:17 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.103 0.974 ALFA beam 1: 1.059 1.032 2008-Apr-27 20:07:17 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.996 0.907 ALFA beam 3: 0.969 1.024 2008-Apr-27 20:07:17 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.901 0.955 ALFA beam 5: 0.972 0.890 2008-Apr-27 20:07:17 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.945 1.008 ALFA beam 7: 1.027 1.122 2008-Apr-27 20:07:17 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-27 20:07:17 LOG5 finish_task: Level: (4) ID = <10220> Status = 0 0 0 0 ok 2008-Apr-27 20:07:17 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-27 20:07:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 20:07:17 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-27 20:07:17 LOG5 end_task: Level: (4) ID = <10220> Status = 0 0 0 0 ok 2008-Apr-27 20:07:17 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-27 20:07:17 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-27 20:07:17 LOG5 finish_task: Level: (3) ID = <10218> Status = 0 0 0 0 ok 2008-Apr-27 20:07:17 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-27 20:07:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 20:07:17 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-27 20:07:17 LOG5 end_task: Level: (3) ID = <10218> Status = 0 0 0 0 ok 2008-Apr-27 20:07:18 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Steve Schnei 2008-Apr-27 20:07:18 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Steve Schnei 2008-Apr-27 20:07:18 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Steve Schnei 2008-Apr-27 20:07:18 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Steve Schnei 2008-Apr-27 20:07:18 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-27 20:07:18 START begin_task: Starting task 'WAPP calibration' 2008-Apr-27 20:07:18 LOG5 begin_task: Level: (3) ID = <10222> Status = 0 0 0 0 ok 2008-Apr-27 20:07:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-27 20:07:18 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-27 20:07:18 START begin_task: Starting task 'selecting calibration type' 2008-Apr-27 20:07:18 LOG5 begin_task: Level: (4) ID = <10223> Status = 0 0 0 0 ok 2008-Apr-27 20:07:18 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-27 20:07:18 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-27 20:07:18 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 20:07:18 START begin_task: Starting task 'waiting on setcal' 2008-Apr-27 20:07:18 LOG5 begin_task: Level: (5) ID = <10224> Status = 0 0 0 0 ok 2008-Apr-27 20:07:18 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Steve Schnei' 2008-Apr-27 20:07:18 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-27 20:07:18 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 20:07:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 20:07:18 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-27 20:07:18 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-27 20:07:18 LOG5 end_task: Level: (5) ID = <10224> Status = 0 0 0 0 ok 2008-Apr-27 20:07:18 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-27 20:07:18 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 20:07:18 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-27 20:07:18 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 20:07:18 LOG5 begin_task: Level: (5) ID = <10225> Status = 0 0 0 0 ok 2008-Apr-27 20:07:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 20:07:18 NOTE WAPPDATA-new_file: New FITS file: wapp.20080427.a2048.0004.fits 2008-Apr-27 20:07:18 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080427.a2048.0004.fits} 2008-Apr-27 20:07:19 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 20:07:19 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 20:07:19 LOG5 end_task: Level: (5) ID = <10225> Status = 0 0 0 0 ok 2008-Apr-27 20:07:19 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 20:07:19 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-27 20:07:19 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 20:07:19 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-27 20:07:19 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 20:07:19 LOG5 begin_task: Level: (5) ID = <10226> Status = 0 0 0 0 ok 2008-Apr-27 20:07:19 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 20:07:19 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 20:07:19 LOG5 end_task: Level: (5) ID = <10226> Status = 0 0 0 0 ok 2008-Apr-27 20:07:19 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 20:07:19 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-27 20:07:19 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-27 20:07:19 LOG5 finish_task: Level: (4) ID = <10223> Status = 0 0 0 0 ok 2008-Apr-27 20:07:19 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-27 20:07:19 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 20:07:19 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-27 20:07:19 LOG5 end_task: Level: (4) ID = <10223> Status = 0 0 0 0 ok 2008-Apr-27 20:07:19 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-27 20:07:19 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-27 20:07:19 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-27 20:07:19 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-27 20:07:19 LOG5 begin_task: Level: (4) ID = <10227> Status = 0 0 0 0 ok 2008-Apr-27 20:07:19 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-27 20:07:19 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-27 20:07:19 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-27 20:07:19 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-27 20:07:19 LOG5 end_task: Level: (4) ID = <10227> Status = 0 0 0 0 ok 2008-Apr-27 20:07:19 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-27 20:07:19 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-27 20:07:19 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-27 20:07:19 LOG5 begin_task: Level: (4) ID = <10228> Status = 0 0 0 0 ok 2008-Apr-27 20:07:19 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-27 20:07:19 LOG5 log_alfabeam: Parameters: 9.8676111111111098 23.133888888888887 10.094362 2008.3253618462747 48.499985 2008-Apr-27 20:07:19 LOG4 log_alfabeam: ALFABEAM 0 9.867611111111113 23.133888888888883 2008-Apr-27 20:07:19 LOG4 log_alfabeam: ALFABEAM 1 9.869945808684760 23.033785024509108 2008-Apr-27 20:07:19 LOG4 log_alfabeam: ALFABEAM 2 9.874431315318555 23.100031798930040 2008-Apr-27 20:07:19 LOG4 log_alfabeam: ALFABEAM 3 9.872220528970601 23.200705641731933 2008-Apr-27 20:07:19 LOG4 log_alfabeam: ALFABEAM 4 9.865341473316656 23.234434015665901 2008-Apr-27 20:07:19 LOG4 log_alfabeam: ALFABEAM 5 9.860710302842881 23.166195601180643 2008-Apr-27 20:07:19 LOG4 log_alfabeam: ALFABEAM 6 9.863103621408053 23.066234559894223 2008-Apr-27 20:07:19 INFO2 take_spectra: Starting WAPP scan: 811800098 2008-Apr-27 20:07:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-27 20:07:20 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-27 20:07:20 LOG5 begin_task: Level: (5) ID = <10229> Status = 0 0 0 0 ok 2008-Apr-27 20:07:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 20:07:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 441.00 2008-Apr-27 20:07:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.113819 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 20:07:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.113819 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 20:07:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.113819 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 20:07:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.113819 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-27 20:07:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.113819 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 20:07:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.113819 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-27 20:07:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.582 > 1.4)! 2008-Apr-27 20:07:26 LOG4 check_wapp_levels: WAPP-1 power levels: 1.103 0.974 1.059 1.032 2008-Apr-27 20:07:26 LOG4 check_wapp_levels: WAPP-2 power levels: 0.996 0.907 0.969 1.024 2008-Apr-27 20:07:26 LOG4 check_wapp_levels: WAPP-3 power levels: 1.271 1.341 1.372 1.200 2008-Apr-27 20:07:26 LOG4 check_wapp_levels: WAPP-4 power levels: 1.356 1.423 1.475 1.582 2008-Apr-27 20:07:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.113819 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-27 20:07:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.113819 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-27 20:07:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.113819 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-27 20:07:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 20:07:26 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-27 20:07:26 LOG5 end_task: Level: (5) ID = <10229> Status = 0 0 0 0 ok 2008-Apr-27 20:07:26 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-27 20:07:26 LOG5 end_task: Level: (4) ID = <10228> Status = 0 0 0 0 ok 2008-Apr-27 20:07:26 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-27 20:07:26 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-27 20:07:26 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-27 20:07:26 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-27 20:07:26 LOG5 begin_task: Level: (4) ID = <10230> Status = 0 0 0 0 ok 2008-Apr-27 20:07:26 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-27 20:07:26 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-27 20:07:26 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-27 20:07:26 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-27 20:07:26 LOG5 end_task: Level: (4) ID = <10230> Status = 0 0 0 0 ok 2008-Apr-27 20:07:26 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-27 20:07:26 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-27 20:07:26 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-27 20:07:26 LOG5 begin_task: Level: (4) ID = <10231> Status = 0 0 0 0 ok 2008-Apr-27 20:07:26 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-27 20:07:26 LOG5 log_alfabeam: Parameters: 9.8676111111111098 23.133888888888887 10.096312 2008.3253620680914 48.499985 2008-Apr-27 20:07:26 LOG4 log_alfabeam: ALFABEAM 0 9.867611111111113 23.133888888888887 2008-Apr-27 20:07:26 LOG4 log_alfabeam: ALFABEAM 1 9.869975775043541 23.033918842319533 2008-Apr-27 20:07:26 LOG4 log_alfabeam: ALFABEAM 2 9.874441546904480 23.100424214047941 2008-Apr-27 20:07:26 LOG4 log_alfabeam: ALFABEAM 3 9.872200265457337 23.200969849118863 2008-Apr-27 20:07:26 LOG4 log_alfabeam: ALFABEAM 4 9.865311149752859 23.234302715045516 2008-Apr-27 20:07:26 LOG4 log_alfabeam: ALFABEAM 5 9.860700756803816 23.165802532023523 2008-Apr-27 20:07:26 LOG4 log_alfabeam: ALFABEAM 6 9.863123865713000 23.065978317272116 2008-Apr-27 20:07:26 INFO2 take_spectra: Starting WAPP scan: 811800099 2008-Apr-27 20:07:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-27 20:07:27 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-27 20:07:27 LOG5 begin_task: Level: (5) ID = <10232> Status = 0 0 0 0 ok 2008-Apr-27 20:07:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 20:07:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 448.00 2008-Apr-27 20:07:32 INFO5 check_wapp_levels: WAPP power levels are between 1.200 and 1.582 (still bad) 2008-Apr-27 20:07:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.113819 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 20:07:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.113819 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 20:07:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.113819 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 20:07:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.113819 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-27 20:07:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.113819 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 20:07:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.113819 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-27 20:07:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.113819 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-27 20:07:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.113819 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-27 20:07:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.113819 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-27 20:07:33 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-27 20:07:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 20:07:33 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-27 20:07:33 LOG5 end_task: Level: (5) ID = <10232> Status = 0 0 0 0 ok 2008-Apr-27 20:07:33 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-27 20:07:33 LOG5 end_task: Level: (4) ID = <10231> Status = 0 0 0 0 ok 2008-Apr-27 20:07:33 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-27 20:07:33 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-27 20:07:33 LOG5 finish_task: Level: (3) ID = <10222> Status = 0 0 0 0 ok 2008-Apr-27 20:07:33 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-27 20:07:33 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 20:07:33 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-27 20:07:33 LOG5 end_task: Level: (3) ID = <10222> Status = 0 0 0 0 ok 2008-Apr-27 20:07:33 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-27 20:07:33 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 147.89 and ZA = 5.63 2008-Apr-27 20:07:33 LOG3 track_source: Calling 'track_source AGES3193_p2_031 147.89 5.6311025800 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-27 20:07:33 START begin_task: Starting task 'sending tracking commands' 2008-Apr-27 20:07:33 LOG5 begin_task: Level: (3) ID = <10233> Status = 0 0 0 0 ok 2008-Apr-27 20:07:33 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_031} INFO {Slewing to source 'AGES3193_p2_031' ...} 2008-Apr-27 20:07:33 INFO1 track_source: Starting to track AGES3193_p2_031 2008-Apr-27 20:07:33 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_031" 2008-Apr-27 20:07:33 LOG3 vw_send: To DATATAKING: set ra 147.89 2008-Apr-27 20:07:33 LOG3 vw_send: To DATATAKING: set dec 5.6311025800 2008-Apr-27 20:07:33 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-27 20:07:33 LOG3 vw_send: To DATATAKING: pnt tr 147.89 5.6311025800 -CF 2008-Apr-27 20:07:33 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 20:07:33 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-27 20:07:33 LOG5 finish_task: Level: (3) ID = <10233> Status = 0 0 0 0 ok 2008-Apr-27 20:07:33 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-27 20:07:33 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 20:07:34 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-27 20:07:34 LOG5 end_task: Level: (3) ID = <10233> Status = 0 0 0 0 ok 2008-Apr-27 20:07:34 LOG1 fixed_driftmap: Parameters: HA = +00:13:00.1 Start = 10:06:29.4 LST = 10:05:53.7 diff = 35.7 secs 2008-Apr-27 20:07:34 INFO2 fixed_driftmap: Waiting 33.7 seconds for RA 9:53:29 2008-Apr-27 20:07:34 INFO2 lstwait: Waiting for 33.6 secs from LST 10:05:54 to LST 10:06:27 ... 2008-Apr-27 20:07:34 LOG4 send_obs_status: To obs_status: <1> TASKTIME 33.580452621648114 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-27 20:07:34 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-27 20:07:34 LOG5 begin_task: Level: (3) ID = <10234> Status = 0 0 0 0 ok 2008-Apr-27 20:07:34 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_031" 2008-Apr-27 20:07:34 LOG4 got_cormsg: From DATATAKING: set ra 147.89 2008-Apr-27 20:07:34 LOG4 got_cormsg: From DATATAKING: set dec 5.6311025800 2008-Apr-27 20:07:34 LOG4 got_cormsg: From DATATAKING: vw% 147.89 2008-Apr-27 20:07:34 LOG4 got_cormsg: From DATATAKING: vw% 5.6311025800 2008-Apr-27 20:07:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 20:07:34 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-27 20:07:34 LOG4 got_cormsg: From DATATAKING: pnt tr 147.89 5.6311025800 -CF 2008-Apr-27 20:07:34 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 20:07:34 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-27 20:07:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 20:07:38 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.889 and 1.121 2008-Apr-27 20:08:07 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-27 20:08:07 LOG5 end_task: Level: (3) ID = <10234> Status = 0 0 0 0 ok 2008-Apr-27 20:08:07 LOG4 lstwait: Finished waiting, the gui caused difference: 0.42320827999802191 2008-Apr-27 20:08:07 INFO3 lstwait: Finished waiting 2008-Apr-27 20:08:07 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-27 20:08:07 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-27 20:08:07 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-27 20:08:07 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-27 20:08:07 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-27 20:08:07 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-27 20:08:07 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-27 20:08:07 LOG5 begin_task: Level: (3) ID = <10235> Status = 0 0 0 0 ok 2008-Apr-27 20:08:07 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-27 20:08:07 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-27 20:08:07 INFO2 take_spectra: Starting WAPP scan: 811800100 2008-Apr-27 20:08:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-27 20:08:08 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-27 20:08:08 LOG5 begin_task: Level: (4) ID = <10236> Status = 0 0 0 0 ok 2008-Apr-27 20:08:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 20:08:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 489.00 2008-Apr-27 20:08:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.113819 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 20:08:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.113819 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 20:08:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.113819 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 20:08:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.113819 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-27 20:08:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.113819 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 20:08:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.113819 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-27 20:08:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.113819 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-27 20:08:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.113819 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-27 20:08:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.113819 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-27 20:18:43 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 20:18:43.296 (seconds: 73123.296)!} 2008-Apr-27 20:18:43 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 20:18:43.296 (seconds: 73123.296)! 2008-Apr-27 20:18:44 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 73122.0 to 73123.0! 2008-Apr-27 20:18:45 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (73122.0 - 73124.0)! 2008-Apr-27 20:28:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 20:28:09 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-27 20:28:09 LOG5 end_task: Level: (4) ID = <10236> Status = 0 0 0 0 ok 2008-Apr-27 20:28:09 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-27 20:28:09 LOG5 end_task: Level: (3) ID = <10235> Status = 0 0 0 0 ok 2008-Apr-27 20:28:09 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-27 20:28:09 LOG5 finish_task: Level: (2) ID = <10202> Status = 0 0 0 0 ok 2008-Apr-27 20:28:09 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-27 20:28:09 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-27 20:28:09 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-27 20:28:09 LOG5 end_task: Level: (2) ID = <10202> Status = 0 0 0 0 ok 2008-Apr-27 20:28:09 COMMAND run_command_line: EXECUTING command 23: 'FIXEDDRIFT az=120.66 alfaangle=77.9 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_033 ra=95300.00 dec=230500.00' 2008-Apr-27 20:28:09 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-27 20:28:10 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-27 20:28:10 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 120.66 77.9 hcorcal 5 tracking no first 1 AGES3193_p2_033 95300.00 230500.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-27 20:28:10 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-27 20:28:10 LOG5 begin_task: Level: (2) ID = <10237> Status = 0 0 0 0 ok 2008-Apr-27 20:28:10 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES3193_p2_031' 2008-Apr-27 20:28:10 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-27 20:28:10 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p2_033} 2008-Apr-27 20:28:10 INFO3 fixed_driftmap: Sending telescope to Az = 120.66 and ZA = 9.63 2008-Apr-27 20:28:10 LOG3 track_source: Calling 'track_source AGES3193_p2_033 120.66 9.6345408666 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-27 20:28:10 START begin_task: Starting task 'sending tracking commands' 2008-Apr-27 20:28:10 LOG5 begin_task: Level: (3) ID = <10238> Status = 0 0 0 0 ok 2008-Apr-27 20:28:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_033} INFO {Slewing to source 'AGES3193_p2_033' ...} 2008-Apr-27 20:28:10 INFO1 track_source: Starting to track AGES3193_p2_033 2008-Apr-27 20:28:10 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_033" 2008-Apr-27 20:28:10 LOG3 vw_send: To DATATAKING: set ra 120.66 2008-Apr-27 20:28:10 LOG3 vw_send: To DATATAKING: set dec 9.6345408666 2008-Apr-27 20:28:10 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-27 20:28:10 LOG3 vw_send: To DATATAKING: pnt tr 120.66 9.6345408666 -CF 2008-Apr-27 20:28:10 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 20:28:10 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-27 20:28:10 LOG5 finish_task: Level: (3) ID = <10238> Status = 0 0 0 0 ok 2008-Apr-27 20:28:10 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-27 20:28:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 20:28:10 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-27 20:28:10 LOG5 end_task: Level: (3) ID = <10238> Status = 0 0 0 0 ok 2008-Apr-27 20:28:10 START begin_task: Starting task 'rotate ALFA to +77.9 degrees' 2008-Apr-27 20:28:10 LOG5 begin_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2008-Apr-27 20:28:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +77.9 degrees ...} 2008-Apr-27 20:28:10 INFO2 rotate_alfa: ALFA commanded to +77.9 degrees 2008-Apr-27 20:28:10 LOG3 sock_errsend: To ALFAMOTOR: POSITION 77.9 REPLY 2008-Apr-27 20:28:10 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-27 20:28:10 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-27 20:28:10 LOG5 begin_task: Level: (4) ID = <10240> Status = 0 0 0 0 ok 2008-Apr-27 20:28:10 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_033" 2008-Apr-27 20:28:10 LOG4 got_cormsg: From DATATAKING: set ra 120.66 2008-Apr-27 20:28:10 LOG4 got_cormsg: From DATATAKING: set dec 9.6345408666 2008-Apr-27 20:28:10 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-27 20:28:10 LOG4 got_cormsg: From DATATAKING: pnt tr 120.66 9.6345408666 -CF 2008-Apr-27 20:28:10 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 20:28:28 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-27 20:28:28 INFO3 alfa_motor: ALFA rotator in-position +77.90 degrees 2008-Apr-27 20:28:28 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-27 20:28:28 LOG5 end_task: Level: (4) ID = <10240> Status = 0 0 0 0 ok 2008-Apr-27 20:28:28 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-27 20:28:28 STOP finish_task: Finishing task 'rotate ALFA to +77.9 degrees' 2008-Apr-27 20:28:28 LOG5 finish_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2008-Apr-27 20:28:28 INFO2 finish_task: DONE finished configuration: rotating ALFA to +77.9 degrees 2008-Apr-27 20:28:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 20:28:28 STOP end_task: Finishing task 'rotate ALFA to +77.9 degrees' with status 'OK' 2008-Apr-27 20:28:28 LOG5 end_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2008-Apr-27 20:28:28 START begin_task: Starting task 'waiting on telescope' 2008-Apr-27 20:28:28 LOG5 begin_task: Level: (3) ID = <10241> Status = 0 0 0 0 ok 2008-Apr-27 20:28:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-27 20:28:28 LOG3 waittrk: Start waittrk 5 2008-Apr-27 20:28:28 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-27 20:28:28 LOG5 begin_task: Level: (4) ID = <10242> Status = 0 0 0 0 ok 2008-Apr-27 20:28:33 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-27 20:28:33 LOG5 end_task: Level: (4) ID = <10242> Status = 0 0 0 0 ok 2008-Apr-27 20:28:33 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-27 20:28:33 LOG5 begin_task: Level: (4) ID = <10243> Status = 0 0 0 0 ok 2008-Apr-27 20:28:33 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-27 20:28:33 LOG5 end_task: Level: (4) ID = <10243> Status = 0 0 0 0 ok 2008-Apr-27 20:28:33 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-27 20:28:33 INFO2 waittrk: Now tracking AGES3193_p2_033 2008-Apr-27 20:28:33 LOG4 waittrk: Current telescope position: Az = 147.68 ZA = 5.64 2008-Apr-27 20:28:33 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-27 20:28:33 LOG5 finish_task: Level: (3) ID = <10241> Status = 0 0 0 0 ok 2008-Apr-27 20:28:33 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-27 20:28:33 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 20:28:33 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-27 20:28:33 LOG5 end_task: Level: (3) ID = <10241> Status = 0 0 0 0 ok 2008-Apr-27 20:28:33 START begin_task: Starting task 'selecting calibration type' 2008-Apr-27 20:28:33 LOG5 begin_task: Level: (3) ID = <10244> Status = 0 0 0 0 ok 2008-Apr-27 20:28:33 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-27 20:28:33 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-27 20:28:33 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 20:28:33 START begin_task: Starting task 'waiting on setcal' 2008-Apr-27 20:28:33 LOG5 begin_task: Level: (4) ID = <10245> Status = 0 0 0 0 ok 2008-Apr-27 20:28:33 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-27 20:28:33 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 20:28:43 ERROR end_wait_seconds: ERROR timed out while waiting for setcal! 2008-Apr-27 20:28:43 LOG1 task_failed: Task 'waiting on setcal' failed! 2008-Apr-27 20:28:43 LOG5 task_failed: Level: (4) ID = <10245> Status = 0 0 0 0 ok 2008-Apr-27 20:28:43 STOP end_task: Finishing task 'waiting on setcal' with status 'FAILED' 2008-Apr-27 20:28:43 LOG5 end_task: Level: (4) ID = <10245> Status = 0 0 0 1 failed 2008-Apr-27 20:28:43 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-27 20:28:43 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-27 20:28:43 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-27 20:28:43 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-27 20:28:43 LOG5 finish_task: Level: (3) ID = <10244> Status = 0 0 0 1 failed 2008-Apr-27 20:28:43 ERROR finish_task: ERROR failed configuring: calibration type 2008-Apr-27 20:28:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Failed 2008-Apr-27 20:28:43 STOP end_task: Finishing task 'selecting calibration type' with status 'FAILED' 2008-Apr-27 20:28:43 LOG5 end_task: Level: (3) ID = <10244> Status = 0 0 0 1 failed 2008-Apr-27 20:28:43 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2008-Apr-27 20:28:43 INFO2 astwait: Waiting for 82 seconds from 00:28:43 to 00:30:05 UTC ... 2008-Apr-27 20:28:43 LOG4 send_obs_status: To obs_status: <1> TASKTIME 82 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-27 20:28:43 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-27 20:28:43 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-27 20:28:43 LOG5 finish_task: Level: (2) ID = <10237> Status = 0 0 0 1 failed 2008-Apr-27 20:28:43 ERROR finish_task: ERROR failed pattern: fixed azimuth drift map 2008-Apr-27 20:28:43 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2008-Apr-27 20:28:43 END end_task: Finishing task 'fixed azimuth drift map' with status 'FAILED' 2008-Apr-27 20:28:43 LOG5 end_task: Level: (2) ID = <10237> Status = 0 0 0 1 failed 2008-Apr-27 20:28:43 ALERT run_command_file: Stopping command file processing at line 23! 2008-Apr-27 20:28:43 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2008-Apr-27 20:28:43 STOP finish_task: Finishing task 'running command file '080427_obs.cmd'' 2008-Apr-27 20:28:43 LOG5 finish_task: Level: (1) ID = <10090> Status = 0 0 0 1 failed 2008-Apr-27 20:28:43 ERROR finish_task: ERROR failed running: command file '080427_obs.cmd' 2008-Apr-27 20:28:43 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2008-Apr-27 20:28:43 END end_task: Finishing task 'running command file '080427_obs.cmd'' with status 'FAILED' 2008-Apr-27 20:28:43 LOG5 end_task: Level: (1) ID = <10090> Status = 0 0 0 1 failed 2008-Apr-27 20:32:42 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-Apr-27 20:32:42 LOG4 exec_msg: From OBSERVER: run_command_file 080427_obs.cmd 23 1 14 2008-Apr-27 20:32:42 LOG4 run_command_file: Calling 'run_command_file 080427_obs.cmd 23 1 14' 2008-Apr-27 20:32:42 BEGIN begin_task: Starting task 'running command file '080427_obs.cmd'' 2008-Apr-27 20:32:42 LOG5 begin_task: Level: (1) ID = <10246> Status = 0 0 0 0 ok 2008-Apr-27 20:32:42 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '080427_obs.cmd' ...} 2008-Apr-27 20:32:42 NOTE run_command_file: Starting execution of command file '080427_obs.cmd' from line 23 2008-Apr-27 20:32:42 COMMAND run_command_line: EXECUTING command 23: 'FIXEDDRIFT az=120.66 alfaangle=77.9 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_033 ra=95300.00 dec=230500.00' 2008-Apr-27 20:32:42 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-27 20:32:43 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-27 20:32:43 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 120.66 77.9 hcorcal 5 tracking no first 1 AGES3193_p2_033 95300.00 230500.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-27 20:32:43 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-27 20:32:43 LOG5 begin_task: Level: (2) ID = <10247> Status = 0 0 0 0 ok 2008-Apr-27 20:32:43 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES3193_p2_033' 2008-Apr-27 20:32:43 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-27 20:32:43 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p2_033} 2008-Apr-27 20:32:43 INFO3 fixed_driftmap: Sending telescope to Az = 120.66 and ZA = 9.63 2008-Apr-27 20:32:43 LOG3 track_source: Calling 'track_source AGES3193_p2_033 120.66 9.6345410634 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-27 20:32:43 START begin_task: Starting task 'sending tracking commands' 2008-Apr-27 20:32:43 LOG5 begin_task: Level: (3) ID = <10248> Status = 0 0 0 0 ok 2008-Apr-27 20:32:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_033} INFO {Slewing to source 'AGES3193_p2_033' ...} 2008-Apr-27 20:32:43 INFO1 track_source: Starting to track AGES3193_p2_033 2008-Apr-27 20:32:43 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_033" 2008-Apr-27 20:32:43 LOG3 vw_send: To DATATAKING: set ra 120.66 2008-Apr-27 20:32:43 LOG3 vw_send: To DATATAKING: set dec 9.6345410634 2008-Apr-27 20:32:43 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-27 20:32:43 LOG3 vw_send: To DATATAKING: pnt tr 120.66 9.6345410634 -CF 2008-Apr-27 20:32:43 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 20:32:43 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-27 20:32:43 LOG5 finish_task: Level: (3) ID = <10248> Status = 0 0 0 0 ok 2008-Apr-27 20:32:43 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-27 20:32:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 20:32:43 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-27 20:32:43 LOG5 end_task: Level: (3) ID = <10248> Status = 0 0 0 0 ok 2008-Apr-27 20:32:43 START begin_task: Starting task 'rotate ALFA to +77.9 degrees' 2008-Apr-27 20:32:43 LOG5 begin_task: Level: (3) ID = <10249> Status = 0 0 0 0 ok 2008-Apr-27 20:32:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +77.9 degrees ...} 2008-Apr-27 20:32:43 INFO2 rotate_alfa: ALFA commanded to +77.9 degrees 2008-Apr-27 20:32:43 LOG3 sock_errsend: To ALFAMOTOR: POSITION 77.9 REPLY 2008-Apr-27 20:32:43 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-27 20:32:43 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-27 20:32:43 LOG5 begin_task: Level: (4) ID = <10250> Status = 0 0 0 0 ok 2008-Apr-27 20:32:43 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_033" 2008-Apr-27 20:32:43 LOG4 got_cormsg: From DATATAKING: set ra 120.66 2008-Apr-27 20:32:43 LOG4 got_cormsg: From DATATAKING: set dec 9.6345410634 2008-Apr-27 20:32:43 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-27 20:32:43 LOG4 got_cormsg: From DATATAKING: pnt tr 120.66 9.6345410634 -CF 2008-Apr-27 20:32:43 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 20:32:44 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-27 20:32:44 INFO3 alfa_motor: ALFA rotator in-position +77.90 degrees 2008-Apr-27 20:32:44 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-27 20:32:44 LOG5 end_task: Level: (4) ID = <10250> Status = 0 0 0 0 ok 2008-Apr-27 20:32:44 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-27 20:32:44 STOP finish_task: Finishing task 'rotate ALFA to +77.9 degrees' 2008-Apr-27 20:32:44 LOG5 finish_task: Level: (3) ID = <10249> Status = 0 0 0 0 ok 2008-Apr-27 20:32:44 INFO2 finish_task: DONE finished configuration: rotating ALFA to +77.9 degrees 2008-Apr-27 20:32:44 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 20:32:44 STOP end_task: Finishing task 'rotate ALFA to +77.9 degrees' with status 'OK' 2008-Apr-27 20:32:44 LOG5 end_task: Level: (3) ID = <10249> Status = 0 0 0 0 ok 2008-Apr-27 20:32:44 START begin_task: Starting task 'waiting on telescope' 2008-Apr-27 20:32:44 LOG5 begin_task: Level: (3) ID = <10251> Status = 0 0 0 0 ok 2008-Apr-27 20:32:44 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-27 20:32:44 LOG3 waittrk: Start waittrk 5 2008-Apr-27 20:32:44 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-27 20:32:44 LOG5 begin_task: Level: (4) ID = <10252> Status = 0 0 0 0 ok 2008-Apr-27 20:32:49 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-27 20:32:49 LOG5 end_task: Level: (4) ID = <10252> Status = 0 0 0 0 ok 2008-Apr-27 20:32:49 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-27 20:32:49 LOG5 begin_task: Level: (4) ID = <10253> Status = 0 0 0 0 ok 2008-Apr-27 20:32:49 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-27 20:32:49 LOG5 end_task: Level: (4) ID = <10253> Status = 0 0 0 0 ok 2008-Apr-27 20:32:49 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-27 20:32:49 INFO2 waittrk: Now tracking AGES3193_p2_033 2008-Apr-27 20:32:49 LOG4 waittrk: Current telescope position: Az = 147.68 ZA = 5.64 2008-Apr-27 20:32:49 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-27 20:32:49 LOG5 finish_task: Level: (3) ID = <10251> Status = 0 0 0 0 ok 2008-Apr-27 20:32:49 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-27 20:32:49 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 20:32:49 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-27 20:32:49 LOG5 end_task: Level: (3) ID = <10251> Status = 0 0 0 0 ok 2008-Apr-27 20:32:49 START begin_task: Starting task 'selecting calibration type' 2008-Apr-27 20:32:49 LOG5 begin_task: Level: (3) ID = <10254> Status = 0 0 0 0 ok 2008-Apr-27 20:32:49 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-27 20:32:49 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-27 20:32:49 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 20:32:49 START begin_task: Starting task 'waiting on setcal' 2008-Apr-27 20:32:49 LOG5 begin_task: Level: (4) ID = <10255> Status = 0 0 0 0 ok 2008-Apr-27 20:32:49 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-27 20:32:49 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 20:32:59 ERROR end_wait_seconds: ERROR timed out while waiting for setcal! 2008-Apr-27 20:32:59 LOG1 task_failed: Task 'waiting on setcal' failed! 2008-Apr-27 20:32:59 LOG5 task_failed: Level: (4) ID = <10255> Status = 0 0 0 0 ok 2008-Apr-27 20:32:59 STOP end_task: Finishing task 'waiting on setcal' with status 'FAILED' 2008-Apr-27 20:32:59 LOG5 end_task: Level: (4) ID = <10255> Status = 0 0 0 1 failed 2008-Apr-27 20:32:59 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-27 20:32:59 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-27 20:32:59 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-27 20:32:59 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-27 20:32:59 LOG5 finish_task: Level: (3) ID = <10254> Status = 0 0 0 1 failed 2008-Apr-27 20:32:59 ERROR finish_task: ERROR failed configuring: calibration type 2008-Apr-27 20:32:59 LOG4 send_obs_status: To obs_status: <0> ENDTASK Failed 2008-Apr-27 20:32:59 STOP end_task: Finishing task 'selecting calibration type' with status 'FAILED' 2008-Apr-27 20:32:59 LOG5 end_task: Level: (3) ID = <10254> Status = 0 0 0 1 failed 2008-Apr-27 20:32:59 LOG5 dopset_later: Calling 'dopset_later 0' 2008-Apr-27 20:32:59 INFO3 dopset_later: Setting Doppler correction now 2008-Apr-27 20:32:59 LOG5 antvel: Calling 'antvel 120.660000 9.634541 F 0' 2008-Apr-27 20:32:59 LOG2 antvel: Parameters to Doppler: Heliocentric 88379 2008 118 0.0 2008-Apr-27 20:32:59 INFO5 antvel: Computed antenna velocity: +28.10802 km/s 2008-Apr-27 20:32:59 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=28.1080216071 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-27 20:32:59 INFO4 dopset_gen: New sky frequencies: 1381.113938 1381.113938 1381.113938 1381.113938 1381.113938 1381.113938 1381.113938 1381.113938 1381.113938 2008-Apr-27 20:32:59 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.113938 sky0=1381.113938 sky1=1381.113938 sky2=1381.113938 sky3=1381.113938 sky4=1381.113938 sky5=1381.113938 sky6=1381.113938 sky7=1381.113938 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-27 20:32:59 LOG2 dopset_gen: Result from 'sky2syn': 1631.113938 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-27 20:32:59 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631113938.0} 2008-Apr-27 20:32:59 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 20:32:59 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-27 20:32:59 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-27 20:33:00 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:54:58.6 Dec = +23:05:03.1 2008-Apr-27 20:33:00 LOG3 track_source: Calling 'track_source AGES3193_p2_033 095458.6 230503.1 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-27 20:33:00 START begin_task: Starting task 'sending tracking commands' 2008-Apr-27 20:33:00 LOG5 begin_task: Level: (3) ID = <10256> Status = 0 0 0 1 failed 2008-Apr-27 20:33:00 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_033} INFO {Slewing to source 'AGES3193_p2_033' ...} 2008-Apr-27 20:33:00 INFO1 track_source: Starting to track AGES3193_p2_033 2008-Apr-27 20:33:00 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_033" 2008-Apr-27 20:33:00 LOG3 vw_send: To DATATAKING: set ra 095458.6 2008-Apr-27 20:33:00 LOG3 vw_send: To DATATAKING: set dec 230503.1 2008-Apr-27 20:33:00 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-27 20:33:00 LOG3 vw_send: To DATATAKING: pnt tr 095458.6 230503.1 -CJ 2008-Apr-27 20:33:00 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 20:33:00 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-27 20:33:00 LOG5 finish_task: Level: (3) ID = <10256> Status = 0 0 0 1 failed 2008-Apr-27 20:33:00 ERROR finish_task: ERROR failed sending: tracking commands 2008-Apr-27 20:33:00 LOG4 send_obs_status: To obs_status: <0> ENDTASK Failed 2008-Apr-27 20:33:00 STOP end_task: Finishing task 'sending tracking commands' with status 'FAILED' 2008-Apr-27 20:33:00 LOG5 end_task: Level: (3) ID = <10256> Status = 0 0 0 1 failed 2008-Apr-27 20:33:00 START begin_task: Starting task 'waiting on telescope' 2008-Apr-27 20:33:00 LOG5 begin_task: Level: (3) ID = <10257> Status = 0 0 0 1 failed 2008-Apr-27 20:33:00 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-27 20:33:00 LOG3 waittrk: Start waittrk 5 2008-Apr-27 20:33:00 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-27 20:33:00 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-27 20:33:00 LOG5 finish_task: Level: (3) ID = <10257> Status = 0 0 0 1 failed 2008-Apr-27 20:33:00 ERROR finish_task: ERROR failed waiting: telescope on source 2008-Apr-27 20:33:00 LOG4 send_obs_status: To obs_status: <0> ENDTASK Failed 2008-Apr-27 20:33:00 STOP end_task: Finishing task 'waiting on telescope' with status 'FAILED' 2008-Apr-27 20:33:00 LOG5 end_task: Level: (3) ID = <10257> Status = 0 0 0 1 failed 2008-Apr-27 20:33:00 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-27 20:33:00 LOG5 finish_task: Level: (2) ID = <10247> Status = 0 0 0 1 failed 2008-Apr-27 20:33:00 ERROR finish_task: ERROR failed pattern: fixed azimuth drift map 2008-Apr-27 20:33:00 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2008-Apr-27 20:33:00 END end_task: Finishing task 'fixed azimuth drift map' with status 'FAILED' 2008-Apr-27 20:33:00 LOG5 end_task: Level: (2) ID = <10247> Status = 0 0 0 1 failed 2008-Apr-27 20:33:00 ALERT run_command_file: Stopping command file processing at line 23! 2008-Apr-27 20:33:00 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2008-Apr-27 20:33:00 STOP finish_task: Finishing task 'running command file '080427_obs.cmd'' 2008-Apr-27 20:33:00 LOG5 finish_task: Level: (1) ID = <10246> Status = 0 0 0 1 failed 2008-Apr-27 20:33:00 ERROR finish_task: ERROR failed running: command file '080427_obs.cmd' 2008-Apr-27 20:33:00 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2008-Apr-27 20:33:00 END end_task: Finishing task 'running command file '080427_obs.cmd'' with status 'FAILED' 2008-Apr-27 20:33:00 LOG5 end_task: Level: (1) ID = <10246> Status = 0 0 0 1 failed 2008-Apr-27 20:33:00 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631113938.0} 2008-Apr-27 20:33:00 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 20:33:00 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_033" 2008-Apr-27 20:33:00 LOG4 got_cormsg: From DATATAKING: set ra 095458.6 2008-Apr-27 20:33:00 LOG4 got_cormsg: From DATATAKING: set dec 230503.1 2008-Apr-27 20:33:00 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-27 20:33:00 LOG4 got_cormsg: From DATATAKING: pnt tr 095458.6 230503.1 -CJ 2008-Apr-27 20:33:00 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 20:33:42 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 20:33:42.297 (seconds: 74022.297)!} 2008-Apr-27 20:33:42 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 20:33:42.297 (seconds: 74022.297)! 2008-Apr-27 20:34:27 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-Apr-27 20:34:27 LOG4 exec_msg: From OBSERVER: run_command_file 080427_obs.cmd 23 1 14 2008-Apr-27 20:34:27 LOG4 run_command_file: Calling 'run_command_file 080427_obs.cmd 23 1 14' 2008-Apr-27 20:34:27 BEGIN begin_task: Starting task 'running command file '080427_obs.cmd'' 2008-Apr-27 20:34:27 LOG5 begin_task: Level: (1) ID = <10258> Status = 0 0 0 0 ok 2008-Apr-27 20:34:27 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '080427_obs.cmd' ...} 2008-Apr-27 20:34:27 NOTE run_command_file: Starting execution of command file '080427_obs.cmd' from line 23 2008-Apr-27 20:34:27 COMMAND run_command_line: EXECUTING command 23: 'FIXEDDRIFT az=120.66 alfaangle=77.9 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_033 ra=95300.00 dec=230500.00' 2008-Apr-27 20:34:27 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-27 20:34:28 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-27 20:34:28 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 120.66 77.9 hcorcal 5 tracking no first 1 AGES3193_p2_033 95300.00 230500.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-27 20:34:28 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-27 20:34:28 LOG5 begin_task: Level: (2) ID = <10259> Status = 0 0 0 0 ok 2008-Apr-27 20:34:28 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES3193_p2_033' 2008-Apr-27 20:34:28 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-27 20:34:28 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p2_033} 2008-Apr-27 20:34:28 INFO3 fixed_driftmap: Sending telescope to Az = 120.66 and ZA = 9.63 2008-Apr-27 20:34:28 LOG3 track_source: Calling 'track_source AGES3193_p2_033 120.66 9.6345411393 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-27 20:34:28 START begin_task: Starting task 'sending tracking commands' 2008-Apr-27 20:34:28 LOG5 begin_task: Level: (3) ID = <10260> Status = 0 0 0 0 ok 2008-Apr-27 20:34:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_033} INFO {Slewing to source 'AGES3193_p2_033' ...} 2008-Apr-27 20:34:28 INFO1 track_source: Starting to track AGES3193_p2_033 2008-Apr-27 20:34:28 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_033" 2008-Apr-27 20:34:28 LOG3 vw_send: To DATATAKING: set ra 120.66 2008-Apr-27 20:34:28 LOG3 vw_send: To DATATAKING: set dec 9.6345411393 2008-Apr-27 20:34:28 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-27 20:34:28 LOG3 vw_send: To DATATAKING: pnt tr 120.66 9.6345411393 -CF 2008-Apr-27 20:34:28 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 20:34:28 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-27 20:34:28 LOG5 finish_task: Level: (3) ID = <10260> Status = 0 0 0 0 ok 2008-Apr-27 20:34:28 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-27 20:34:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 20:34:28 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-27 20:34:28 LOG5 end_task: Level: (3) ID = <10260> Status = 0 0 0 0 ok 2008-Apr-27 20:34:28 START begin_task: Starting task 'rotate ALFA to +77.9 degrees' 2008-Apr-27 20:34:28 LOG5 begin_task: Level: (3) ID = <10261> Status = 0 0 0 0 ok 2008-Apr-27 20:34:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +77.9 degrees ...} 2008-Apr-27 20:34:28 INFO2 rotate_alfa: ALFA commanded to +77.9 degrees 2008-Apr-27 20:34:28 LOG3 sock_errsend: To ALFAMOTOR: POSITION 77.9 REPLY 2008-Apr-27 20:34:28 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-27 20:34:28 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-27 20:34:28 LOG5 begin_task: Level: (4) ID = <10262> Status = 0 0 0 0 ok 2008-Apr-27 20:34:28 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_033" 2008-Apr-27 20:34:28 LOG4 got_cormsg: From DATATAKING: set ra 120.66 2008-Apr-27 20:34:28 LOG4 got_cormsg: From DATATAKING: set dec 9.6345411393 2008-Apr-27 20:34:28 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-27 20:34:28 LOG4 got_cormsg: From DATATAKING: pnt tr 120.66 9.6345411393 -CF 2008-Apr-27 20:34:28 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 20:34:29 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-27 20:34:29 INFO3 alfa_motor: ALFA rotator in-position +77.90 degrees 2008-Apr-27 20:34:29 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-27 20:34:29 LOG5 end_task: Level: (4) ID = <10262> Status = 0 0 0 0 ok 2008-Apr-27 20:34:29 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-27 20:34:29 STOP finish_task: Finishing task 'rotate ALFA to +77.9 degrees' 2008-Apr-27 20:34:29 LOG5 finish_task: Level: (3) ID = <10261> Status = 0 0 0 0 ok 2008-Apr-27 20:34:29 INFO2 finish_task: DONE finished configuration: rotating ALFA to +77.9 degrees 2008-Apr-27 20:34:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 20:34:29 STOP end_task: Finishing task 'rotate ALFA to +77.9 degrees' with status 'OK' 2008-Apr-27 20:34:29 LOG5 end_task: Level: (3) ID = <10261> Status = 0 0 0 0 ok 2008-Apr-27 20:34:29 START begin_task: Starting task 'waiting on telescope' 2008-Apr-27 20:34:29 LOG5 begin_task: Level: (3) ID = <10263> Status = 0 0 0 0 ok 2008-Apr-27 20:34:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-27 20:34:29 LOG3 waittrk: Start waittrk 5 2008-Apr-27 20:34:29 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-27 20:34:29 LOG5 begin_task: Level: (4) ID = <10264> Status = 0 0 0 0 ok 2008-Apr-27 20:34:34 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-27 20:34:34 LOG5 end_task: Level: (4) ID = <10264> Status = 0 0 0 0 ok 2008-Apr-27 20:34:34 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-27 20:34:34 LOG5 begin_task: Level: (4) ID = <10265> Status = 0 0 0 0 ok 2008-Apr-27 20:34:34 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-27 20:34:34 LOG5 end_task: Level: (4) ID = <10265> Status = 0 0 0 0 ok 2008-Apr-27 20:34:34 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-27 20:34:34 INFO2 waittrk: Now tracking AGES3193_p2_033 2008-Apr-27 20:34:34 LOG4 waittrk: Current telescope position: Az = 147.68 ZA = 5.64 2008-Apr-27 20:34:34 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-27 20:34:34 LOG5 finish_task: Level: (3) ID = <10263> Status = 0 0 0 0 ok 2008-Apr-27 20:34:34 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-27 20:34:34 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 20:34:34 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-27 20:34:34 LOG5 end_task: Level: (3) ID = <10263> Status = 0 0 0 0 ok 2008-Apr-27 20:34:34 START begin_task: Starting task 'selecting calibration type' 2008-Apr-27 20:34:34 LOG5 begin_task: Level: (3) ID = <10266> Status = 0 0 0 0 ok 2008-Apr-27 20:34:34 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-27 20:34:34 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-27 20:34:34 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 20:34:34 START begin_task: Starting task 'waiting on setcal' 2008-Apr-27 20:34:34 LOG5 begin_task: Level: (4) ID = <10267> Status = 0 0 0 0 ok 2008-Apr-27 20:34:35 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-27 20:34:35 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 20:34:45 ERROR end_wait_seconds: ERROR timed out while waiting for setcal! 2008-Apr-27 20:34:45 LOG1 task_failed: Task 'waiting on setcal' failed! 2008-Apr-27 20:34:45 LOG5 task_failed: Level: (4) ID = <10267> Status = 0 0 0 0 ok 2008-Apr-27 20:34:45 STOP end_task: Finishing task 'waiting on setcal' with status 'FAILED' 2008-Apr-27 20:34:45 LOG5 end_task: Level: (4) ID = <10267> Status = 0 0 0 1 failed 2008-Apr-27 20:34:45 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-27 20:34:45 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-27 20:34:45 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-27 20:34:45 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-27 20:34:45 LOG5 finish_task: Level: (3) ID = <10266> Status = 0 0 0 1 failed 2008-Apr-27 20:34:45 ERROR finish_task: ERROR failed configuring: calibration type 2008-Apr-27 20:34:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Failed 2008-Apr-27 20:34:45 STOP end_task: Finishing task 'selecting calibration type' with status 'FAILED' 2008-Apr-27 20:34:45 LOG5 end_task: Level: (3) ID = <10266> Status = 0 0 0 1 failed 2008-Apr-27 20:34:45 LOG5 dopset_later: Calling 'dopset_later 0' 2008-Apr-27 20:34:45 INFO3 dopset_later: Setting Doppler correction now 2008-Apr-27 20:34:45 LOG5 antvel: Calling 'antvel 120.660000 9.634541 F 0' 2008-Apr-27 20:34:45 LOG2 antvel: Parameters to Doppler: Heliocentric 88484 2008 118 0.0 2008-Apr-27 20:34:45 INFO5 antvel: Computed antenna velocity: +28.04234 km/s 2008-Apr-27 20:34:45 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=28.0423392931 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-27 20:34:45 INFO4 dopset_gen: New sky frequencies: 1381.114240 1381.114240 1381.114240 1381.114240 1381.114240 1381.114240 1381.114240 1381.114240 1381.114240 2008-Apr-27 20:34:45 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.114240 sky0=1381.114240 sky1=1381.114240 sky2=1381.114240 sky3=1381.114240 sky4=1381.114240 sky5=1381.114240 sky6=1381.114240 sky7=1381.114240 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-27 20:34:45 LOG2 dopset_gen: Result from 'sky2syn': 1631.114240 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-27 20:34:45 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631114240.0} 2008-Apr-27 20:34:45 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 20:34:45 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-27 20:34:45 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-27 20:34:45 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:56:43.9 Dec = +23:05:03.7 2008-Apr-27 20:34:45 LOG3 track_source: Calling 'track_source AGES3193_p2_033 095643.9 230503.7 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-27 20:34:45 START begin_task: Starting task 'sending tracking commands' 2008-Apr-27 20:34:45 LOG5 begin_task: Level: (3) ID = <10268> Status = 0 0 0 1 failed 2008-Apr-27 20:34:45 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_033} INFO {Slewing to source 'AGES3193_p2_033' ...} 2008-Apr-27 20:34:45 INFO1 track_source: Starting to track AGES3193_p2_033 2008-Apr-27 20:34:45 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_033" 2008-Apr-27 20:34:45 LOG3 vw_send: To DATATAKING: set ra 095643.9 2008-Apr-27 20:34:45 LOG3 vw_send: To DATATAKING: set dec 230503.7 2008-Apr-27 20:34:45 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-27 20:34:45 LOG3 vw_send: To DATATAKING: pnt tr 095643.9 230503.7 -CJ 2008-Apr-27 20:34:45 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 20:34:45 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-27 20:34:45 LOG5 finish_task: Level: (3) ID = <10268> Status = 0 0 0 1 failed 2008-Apr-27 20:34:45 ERROR finish_task: ERROR failed sending: tracking commands 2008-Apr-27 20:34:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Failed 2008-Apr-27 20:34:45 STOP end_task: Finishing task 'sending tracking commands' with status 'FAILED' 2008-Apr-27 20:34:45 LOG5 end_task: Level: (3) ID = <10268> Status = 0 0 0 1 failed 2008-Apr-27 20:34:45 START begin_task: Starting task 'waiting on telescope' 2008-Apr-27 20:34:45 LOG5 begin_task: Level: (3) ID = <10269> Status = 0 0 0 1 failed 2008-Apr-27 20:34:45 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-27 20:34:45 LOG3 waittrk: Start waittrk 5 2008-Apr-27 20:34:45 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-27 20:34:45 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-27 20:34:45 LOG5 finish_task: Level: (3) ID = <10269> Status = 0 0 0 1 failed 2008-Apr-27 20:34:45 ERROR finish_task: ERROR failed waiting: telescope on source 2008-Apr-27 20:34:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Failed 2008-Apr-27 20:34:45 STOP end_task: Finishing task 'waiting on telescope' with status 'FAILED' 2008-Apr-27 20:34:45 LOG5 end_task: Level: (3) ID = <10269> Status = 0 0 0 1 failed 2008-Apr-27 20:34:45 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-27 20:34:45 LOG5 finish_task: Level: (2) ID = <10259> Status = 0 0 0 1 failed 2008-Apr-27 20:34:45 ERROR finish_task: ERROR failed pattern: fixed azimuth drift map 2008-Apr-27 20:34:45 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2008-Apr-27 20:34:45 END end_task: Finishing task 'fixed azimuth drift map' with status 'FAILED' 2008-Apr-27 20:34:45 LOG5 end_task: Level: (2) ID = <10259> Status = 0 0 0 1 failed 2008-Apr-27 20:34:45 ALERT run_command_file: Stopping command file processing at line 23! 2008-Apr-27 20:34:45 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2008-Apr-27 20:34:45 STOP finish_task: Finishing task 'running command file '080427_obs.cmd'' 2008-Apr-27 20:34:45 LOG5 finish_task: Level: (1) ID = <10258> Status = 0 0 0 1 failed 2008-Apr-27 20:34:45 ERROR finish_task: ERROR failed running: command file '080427_obs.cmd' 2008-Apr-27 20:34:45 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2008-Apr-27 20:34:45 END end_task: Finishing task 'running command file '080427_obs.cmd'' with status 'FAILED' 2008-Apr-27 20:34:45 LOG5 end_task: Level: (1) ID = <10258> Status = 0 0 0 1 failed 2008-Apr-27 20:34:45 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631114240.0} 2008-Apr-27 20:34:45 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 20:34:45 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_033" 2008-Apr-27 20:34:45 LOG4 got_cormsg: From DATATAKING: set ra 095643.9 2008-Apr-27 20:34:45 LOG4 got_cormsg: From DATATAKING: set dec 230503.7 2008-Apr-27 20:34:45 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-27 20:34:45 LOG4 got_cormsg: From DATATAKING: pnt tr 095643.9 230503.7 -CJ 2008-Apr-27 20:34:45 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 20:35:34 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-Apr-27 20:35:34 LOG4 exec_msg: From OBSERVER: run_command_file 080427_obs.cmd 21 1 14 2008-Apr-27 20:35:34 LOG4 run_command_file: Calling 'run_command_file 080427_obs.cmd 21 1 14' 2008-Apr-27 20:35:34 BEGIN begin_task: Starting task 'running command file '080427_obs.cmd'' 2008-Apr-27 20:35:34 LOG5 begin_task: Level: (1) ID = <10270> Status = 0 0 0 0 ok 2008-Apr-27 20:35:34 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '080427_obs.cmd' ...} 2008-Apr-27 20:35:34 NOTE run_command_file: Starting execution of command file '080427_obs.cmd' from line 21 2008-Apr-27 20:35:34 COMMAND run_command_line: EXECUTING command 23: 'FIXEDDRIFT az=120.66 alfaangle=77.9 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_033 ra=95300.00 dec=230500.00' 2008-Apr-27 20:35:34 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-27 20:35:35 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-27 20:35:35 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 120.66 77.9 hcorcal 5 tracking no first 1 AGES3193_p2_033 95300.00 230500.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-27 20:35:35 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-27 20:35:35 LOG5 begin_task: Level: (2) ID = <10271> Status = 0 0 0 0 ok 2008-Apr-27 20:35:35 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES3193_p2_033' 2008-Apr-27 20:35:35 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-27 20:35:35 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p2_033} 2008-Apr-27 20:35:35 INFO3 fixed_driftmap: Sending telescope to Az = 120.66 and ZA = 9.63 2008-Apr-27 20:35:35 LOG3 track_source: Calling 'track_source AGES3193_p2_033 120.66 9.6345411883 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-27 20:35:35 START begin_task: Starting task 'sending tracking commands' 2008-Apr-27 20:35:35 LOG5 begin_task: Level: (3) ID = <10272> Status = 0 0 0 0 ok 2008-Apr-27 20:35:35 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_033} INFO {Slewing to source 'AGES3193_p2_033' ...} 2008-Apr-27 20:35:35 INFO1 track_source: Starting to track AGES3193_p2_033 2008-Apr-27 20:35:35 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_033" 2008-Apr-27 20:35:35 LOG3 vw_send: To DATATAKING: set ra 120.66 2008-Apr-27 20:35:35 LOG3 vw_send: To DATATAKING: set dec 9.6345411883 2008-Apr-27 20:35:35 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-27 20:35:35 LOG3 vw_send: To DATATAKING: pnt tr 120.66 9.6345411883 -CF 2008-Apr-27 20:35:35 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 20:35:35 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-27 20:35:35 LOG5 finish_task: Level: (3) ID = <10272> Status = 0 0 0 0 ok 2008-Apr-27 20:35:35 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-27 20:35:35 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 20:35:35 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-27 20:35:35 LOG5 end_task: Level: (3) ID = <10272> Status = 0 0 0 0 ok 2008-Apr-27 20:35:35 START begin_task: Starting task 'rotate ALFA to +77.9 degrees' 2008-Apr-27 20:35:35 LOG5 begin_task: Level: (3) ID = <10273> Status = 0 0 0 0 ok 2008-Apr-27 20:35:35 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +77.9 degrees ...} 2008-Apr-27 20:35:35 INFO2 rotate_alfa: ALFA commanded to +77.9 degrees 2008-Apr-27 20:35:35 LOG3 sock_errsend: To ALFAMOTOR: POSITION 77.9 REPLY 2008-Apr-27 20:35:35 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-27 20:35:35 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-27 20:35:35 LOG5 begin_task: Level: (4) ID = <10274> Status = 0 0 0 0 ok 2008-Apr-27 20:35:35 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_033" 2008-Apr-27 20:35:35 LOG4 got_cormsg: From DATATAKING: set ra 120.66 2008-Apr-27 20:35:35 LOG4 got_cormsg: From DATATAKING: set dec 9.6345411883 2008-Apr-27 20:35:35 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-27 20:35:35 LOG4 got_cormsg: From DATATAKING: pnt tr 120.66 9.6345411883 -CF 2008-Apr-27 20:35:35 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 20:35:36 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-27 20:35:36 INFO3 alfa_motor: ALFA rotator in-position +77.90 degrees 2008-Apr-27 20:35:36 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-27 20:35:36 LOG5 end_task: Level: (4) ID = <10274> Status = 0 0 0 0 ok 2008-Apr-27 20:35:36 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-27 20:35:36 STOP finish_task: Finishing task 'rotate ALFA to +77.9 degrees' 2008-Apr-27 20:35:36 LOG5 finish_task: Level: (3) ID = <10273> Status = 0 0 0 0 ok 2008-Apr-27 20:35:36 INFO2 finish_task: DONE finished configuration: rotating ALFA to +77.9 degrees 2008-Apr-27 20:35:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 20:35:36 STOP end_task: Finishing task 'rotate ALFA to +77.9 degrees' with status 'OK' 2008-Apr-27 20:35:36 LOG5 end_task: Level: (3) ID = <10273> Status = 0 0 0 0 ok 2008-Apr-27 20:35:36 START begin_task: Starting task 'waiting on telescope' 2008-Apr-27 20:35:36 LOG5 begin_task: Level: (3) ID = <10275> Status = 0 0 0 0 ok 2008-Apr-27 20:35:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-27 20:35:36 LOG3 waittrk: Start waittrk 5 2008-Apr-27 20:35:36 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-27 20:35:36 LOG5 begin_task: Level: (4) ID = <10276> Status = 0 0 0 0 ok 2008-Apr-27 20:35:41 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-27 20:35:41 LOG5 end_task: Level: (4) ID = <10276> Status = 0 0 0 0 ok 2008-Apr-27 20:35:41 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-27 20:35:41 LOG5 begin_task: Level: (4) ID = <10277> Status = 0 0 0 0 ok 2008-Apr-27 20:35:41 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-27 20:35:41 LOG5 end_task: Level: (4) ID = <10277> Status = 0 0 0 0 ok 2008-Apr-27 20:35:41 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-27 20:35:41 INFO2 waittrk: Now tracking AGES3193_p2_033 2008-Apr-27 20:35:42 LOG4 waittrk: Current telescope position: Az = 147.68 ZA = 5.64 2008-Apr-27 20:35:42 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-27 20:35:42 LOG5 finish_task: Level: (3) ID = <10275> Status = 0 0 0 0 ok 2008-Apr-27 20:35:42 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-27 20:35:42 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 20:35:42 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-27 20:35:42 LOG5 end_task: Level: (3) ID = <10275> Status = 0 0 0 0 ok 2008-Apr-27 20:35:42 START begin_task: Starting task 'selecting calibration type' 2008-Apr-27 20:35:42 LOG5 begin_task: Level: (3) ID = <10278> Status = 0 0 0 0 ok 2008-Apr-27 20:35:42 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-27 20:35:42 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-27 20:35:42 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 20:35:42 START begin_task: Starting task 'waiting on setcal' 2008-Apr-27 20:35:42 LOG5 begin_task: Level: (4) ID = <10279> Status = 0 0 0 0 ok 2008-Apr-27 20:35:42 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-27 20:35:42 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 20:35:52 ERROR end_wait_seconds: ERROR timed out while waiting for setcal! 2008-Apr-27 20:35:52 LOG1 task_failed: Task 'waiting on setcal' failed! 2008-Apr-27 20:35:52 LOG5 task_failed: Level: (4) ID = <10279> Status = 0 0 0 0 ok 2008-Apr-27 20:35:52 STOP end_task: Finishing task 'waiting on setcal' with status 'FAILED' 2008-Apr-27 20:35:52 LOG5 end_task: Level: (4) ID = <10279> Status = 0 0 0 1 failed 2008-Apr-27 20:35:52 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-27 20:35:52 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-27 20:35:52 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-27 20:35:52 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-27 20:35:52 LOG5 finish_task: Level: (3) ID = <10278> Status = 0 0 0 1 failed 2008-Apr-27 20:35:52 ERROR finish_task: ERROR failed configuring: calibration type 2008-Apr-27 20:35:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Failed 2008-Apr-27 20:35:52 STOP end_task: Finishing task 'selecting calibration type' with status 'FAILED' 2008-Apr-27 20:35:52 LOG5 end_task: Level: (3) ID = <10278> Status = 0 0 0 1 failed 2008-Apr-27 20:35:52 LOG5 dopset_later: Calling 'dopset_later 0' 2008-Apr-27 20:35:52 INFO3 dopset_later: Setting Doppler correction now 2008-Apr-27 20:35:52 LOG5 antvel: Calling 'antvel 120.660000 9.634541 F 0' 2008-Apr-27 20:35:52 LOG2 antvel: Parameters to Doppler: Heliocentric 88551 2008 118 0.0 2008-Apr-27 20:35:52 INFO5 antvel: Computed antenna velocity: +27.99969 km/s 2008-Apr-27 20:35:52 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=27.999686015200002 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-27 20:35:52 INFO4 dopset_gen: New sky frequencies: 1381.114437 1381.114437 1381.114437 1381.114437 1381.114437 1381.114437 1381.114437 1381.114437 1381.114437 2008-Apr-27 20:35:52 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.114437 sky0=1381.114437 sky1=1381.114437 sky2=1381.114437 sky3=1381.114437 sky4=1381.114437 sky5=1381.114437 sky6=1381.114437 sky7=1381.114437 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-27 20:35:52 LOG2 dopset_gen: Result from 'sky2syn': 1631.114437 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-27 20:35:52 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631114437.0} 2008-Apr-27 20:35:52 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 20:35:52 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-27 20:35:52 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-27 20:35:52 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:57:51.1 Dec = +23:05:04.2 2008-Apr-27 20:35:52 LOG3 track_source: Calling 'track_source AGES3193_p2_033 095751.1 230504.2 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-27 20:35:52 START begin_task: Starting task 'sending tracking commands' 2008-Apr-27 20:35:52 LOG5 begin_task: Level: (3) ID = <10280> Status = 0 0 0 1 failed 2008-Apr-27 20:35:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_033} INFO {Slewing to source 'AGES3193_p2_033' ...} 2008-Apr-27 20:35:52 INFO1 track_source: Starting to track AGES3193_p2_033 2008-Apr-27 20:35:52 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_033" 2008-Apr-27 20:35:52 LOG3 vw_send: To DATATAKING: set ra 095751.1 2008-Apr-27 20:35:52 LOG3 vw_send: To DATATAKING: set dec 230504.2 2008-Apr-27 20:35:52 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-27 20:35:52 LOG3 vw_send: To DATATAKING: pnt tr 095751.1 230504.2 -CJ 2008-Apr-27 20:35:52 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 20:35:52 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-27 20:35:52 LOG5 finish_task: Level: (3) ID = <10280> Status = 0 0 0 1 failed 2008-Apr-27 20:35:52 ERROR finish_task: ERROR failed sending: tracking commands 2008-Apr-27 20:35:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Failed 2008-Apr-27 20:35:52 STOP end_task: Finishing task 'sending tracking commands' with status 'FAILED' 2008-Apr-27 20:35:52 LOG5 end_task: Level: (3) ID = <10280> Status = 0 0 0 1 failed 2008-Apr-27 20:35:52 START begin_task: Starting task 'waiting on telescope' 2008-Apr-27 20:35:52 LOG5 begin_task: Level: (3) ID = <10281> Status = 0 0 0 1 failed 2008-Apr-27 20:35:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-27 20:35:52 LOG3 waittrk: Start waittrk 5 2008-Apr-27 20:35:52 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-27 20:35:52 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-27 20:35:52 LOG5 finish_task: Level: (3) ID = <10281> Status = 0 0 0 1 failed 2008-Apr-27 20:35:52 ERROR finish_task: ERROR failed waiting: telescope on source 2008-Apr-27 20:35:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Failed 2008-Apr-27 20:35:52 STOP end_task: Finishing task 'waiting on telescope' with status 'FAILED' 2008-Apr-27 20:35:52 LOG5 end_task: Level: (3) ID = <10281> Status = 0 0 0 1 failed 2008-Apr-27 20:35:52 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-27 20:35:52 LOG5 finish_task: Level: (2) ID = <10271> Status = 0 0 0 1 failed 2008-Apr-27 20:35:52 ERROR finish_task: ERROR failed pattern: fixed azimuth drift map 2008-Apr-27 20:35:52 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2008-Apr-27 20:35:52 END end_task: Finishing task 'fixed azimuth drift map' with status 'FAILED' 2008-Apr-27 20:35:52 LOG5 end_task: Level: (2) ID = <10271> Status = 0 0 0 1 failed 2008-Apr-27 20:35:52 ALERT run_command_file: Stopping command file processing at line 23! 2008-Apr-27 20:35:52 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2008-Apr-27 20:35:52 STOP finish_task: Finishing task 'running command file '080427_obs.cmd'' 2008-Apr-27 20:35:52 LOG5 finish_task: Level: (1) ID = <10270> Status = 0 0 0 1 failed 2008-Apr-27 20:35:52 ERROR finish_task: ERROR failed running: command file '080427_obs.cmd' 2008-Apr-27 20:35:52 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2008-Apr-27 20:35:52 END end_task: Finishing task 'running command file '080427_obs.cmd'' with status 'FAILED' 2008-Apr-27 20:35:52 LOG5 end_task: Level: (1) ID = <10270> Status = 0 0 0 1 failed 2008-Apr-27 20:35:52 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631114437.0} 2008-Apr-27 20:35:52 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 20:35:53 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_033" 2008-Apr-27 20:35:53 LOG4 got_cormsg: From DATATAKING: set ra 095751.1 2008-Apr-27 20:35:53 LOG4 got_cormsg: From DATATAKING: set dec 230504.2 2008-Apr-27 20:35:53 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-27 20:35:53 LOG4 got_cormsg: From DATATAKING: pnt tr 095751.1 230504.2 -CJ 2008-Apr-27 20:35:53 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 20:36:48 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-Apr-27 20:36:48 LOG4 exec_msg: From OBSERVER: run_command_file 080427_obs.cmd 21 1 14 2008-Apr-27 20:36:48 LOG4 run_command_file: Calling 'run_command_file 080427_obs.cmd 21 1 14' 2008-Apr-27 20:36:48 BEGIN begin_task: Starting task 'running command file '080427_obs.cmd'' 2008-Apr-27 20:36:48 LOG5 begin_task: Level: (1) ID = <10282> Status = 0 0 0 0 ok 2008-Apr-27 20:36:48 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '080427_obs.cmd' ...} 2008-Apr-27 20:36:48 NOTE run_command_file: Starting execution of command file '080427_obs.cmd' from line 21 2008-Apr-27 20:36:48 COMMAND run_command_line: EXECUTING command 23: 'FIXEDDRIFT az=120.66 alfaangle=77.9 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_033 ra=95300.00 dec=230500.00' 2008-Apr-27 20:36:48 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-27 20:36:48 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-27 20:36:48 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 120.66 77.9 hcorcal 5 tracking no first 1 AGES3193_p2_033 95300.00 230500.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-27 20:36:48 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-27 20:36:48 LOG5 begin_task: Level: (2) ID = <10283> Status = 0 0 0 0 ok 2008-Apr-27 20:36:48 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES3193_p2_033' 2008-Apr-27 20:36:48 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-27 20:36:48 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p2_033} 2008-Apr-27 20:36:49 INFO3 fixed_driftmap: Sending telescope to Az = 120.66 and ZA = 9.63 2008-Apr-27 20:36:49 LOG3 track_source: Calling 'track_source AGES3193_p2_033 120.66 9.6345412410 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-27 20:36:49 START begin_task: Starting task 'sending tracking commands' 2008-Apr-27 20:36:49 LOG5 begin_task: Level: (3) ID = <10284> Status = 0 0 0 0 ok 2008-Apr-27 20:36:49 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_033} INFO {Slewing to source 'AGES3193_p2_033' ...} 2008-Apr-27 20:36:49 INFO1 track_source: Starting to track AGES3193_p2_033 2008-Apr-27 20:36:49 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_033" 2008-Apr-27 20:36:49 LOG3 vw_send: To DATATAKING: set ra 120.66 2008-Apr-27 20:36:49 LOG3 vw_send: To DATATAKING: set dec 9.6345412410 2008-Apr-27 20:36:49 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-27 20:36:49 LOG3 vw_send: To DATATAKING: pnt tr 120.66 9.6345412410 -CF 2008-Apr-27 20:36:49 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 20:36:49 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-27 20:36:49 LOG5 finish_task: Level: (3) ID = <10284> Status = 0 0 0 0 ok 2008-Apr-27 20:36:49 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-27 20:36:49 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 20:36:49 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-27 20:36:49 LOG5 end_task: Level: (3) ID = <10284> Status = 0 0 0 0 ok 2008-Apr-27 20:36:49 START begin_task: Starting task 'rotate ALFA to +77.9 degrees' 2008-Apr-27 20:36:49 LOG5 begin_task: Level: (3) ID = <10285> Status = 0 0 0 0 ok 2008-Apr-27 20:36:49 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +77.9 degrees ...} 2008-Apr-27 20:36:49 INFO2 rotate_alfa: ALFA commanded to +77.9 degrees 2008-Apr-27 20:36:49 LOG3 sock_errsend: To ALFAMOTOR: POSITION 77.9 REPLY 2008-Apr-27 20:36:49 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-27 20:36:49 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-27 20:36:49 LOG5 begin_task: Level: (4) ID = <10286> Status = 0 0 0 0 ok 2008-Apr-27 20:36:49 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_033" 2008-Apr-27 20:36:49 LOG4 got_cormsg: From DATATAKING: set ra 120.66 2008-Apr-27 20:36:49 LOG4 got_cormsg: From DATATAKING: set dec 9.6345412410 2008-Apr-27 20:36:49 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-27 20:36:49 LOG4 got_cormsg: From DATATAKING: pnt tr 120.66 9.6345412410 -CF 2008-Apr-27 20:36:49 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 20:36:50 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-27 20:36:50 INFO3 alfa_motor: ALFA rotator in-position +77.90 degrees 2008-Apr-27 20:36:50 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-27 20:36:50 LOG5 end_task: Level: (4) ID = <10286> Status = 0 0 0 0 ok 2008-Apr-27 20:36:50 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-27 20:36:50 STOP finish_task: Finishing task 'rotate ALFA to +77.9 degrees' 2008-Apr-27 20:36:50 LOG5 finish_task: Level: (3) ID = <10285> Status = 0 0 0 0 ok 2008-Apr-27 20:36:50 INFO2 finish_task: DONE finished configuration: rotating ALFA to +77.9 degrees 2008-Apr-27 20:36:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 20:36:50 STOP end_task: Finishing task 'rotate ALFA to +77.9 degrees' with status 'OK' 2008-Apr-27 20:36:50 LOG5 end_task: Level: (3) ID = <10285> Status = 0 0 0 0 ok 2008-Apr-27 20:36:50 START begin_task: Starting task 'waiting on telescope' 2008-Apr-27 20:36:50 LOG5 begin_task: Level: (3) ID = <10287> Status = 0 0 0 0 ok 2008-Apr-27 20:36:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-27 20:36:50 LOG3 waittrk: Start waittrk 5 2008-Apr-27 20:36:50 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-27 20:36:50 LOG5 begin_task: Level: (4) ID = <10288> Status = 0 0 0 0 ok 2008-Apr-27 20:36:55 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-27 20:36:55 LOG5 end_task: Level: (4) ID = <10288> Status = 0 0 0 0 ok 2008-Apr-27 20:36:55 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-27 20:36:55 LOG5 begin_task: Level: (4) ID = <10289> Status = 0 0 0 0 ok 2008-Apr-27 20:36:55 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-27 20:36:55 LOG5 end_task: Level: (4) ID = <10289> Status = 0 0 0 0 ok 2008-Apr-27 20:36:55 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-27 20:36:55 INFO2 waittrk: Now tracking AGES3193_p2_033 2008-Apr-27 20:36:55 LOG4 waittrk: Current telescope position: Az = 147.68 ZA = 5.64 2008-Apr-27 20:36:55 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-27 20:36:55 LOG5 finish_task: Level: (3) ID = <10287> Status = 0 0 0 0 ok 2008-Apr-27 20:36:55 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-27 20:36:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 20:36:55 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-27 20:36:55 LOG5 end_task: Level: (3) ID = <10287> Status = 0 0 0 0 ok 2008-Apr-27 20:36:55 START begin_task: Starting task 'selecting calibration type' 2008-Apr-27 20:36:55 LOG5 begin_task: Level: (3) ID = <10290> Status = 0 0 0 0 ok 2008-Apr-27 20:36:55 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-27 20:36:55 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-27 20:36:55 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 20:36:55 START begin_task: Starting task 'waiting on setcal' 2008-Apr-27 20:36:55 LOG5 begin_task: Level: (4) ID = <10291> Status = 0 0 0 0 ok 2008-Apr-27 20:36:55 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-27 20:36:55 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 20:37:05 ERROR end_wait_seconds: ERROR timed out while waiting for setcal! 2008-Apr-27 20:37:05 LOG1 task_failed: Task 'waiting on setcal' failed! 2008-Apr-27 20:37:05 LOG5 task_failed: Level: (4) ID = <10291> Status = 0 0 0 0 ok 2008-Apr-27 20:37:05 STOP end_task: Finishing task 'waiting on setcal' with status 'FAILED' 2008-Apr-27 20:37:05 LOG5 end_task: Level: (4) ID = <10291> Status = 0 0 0 1 failed 2008-Apr-27 20:37:05 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-27 20:37:05 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-27 20:37:05 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-27 20:37:05 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-27 20:37:05 LOG5 finish_task: Level: (3) ID = <10290> Status = 0 0 0 1 failed 2008-Apr-27 20:37:05 ERROR finish_task: ERROR failed configuring: calibration type 2008-Apr-27 20:37:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Failed 2008-Apr-27 20:37:05 STOP end_task: Finishing task 'selecting calibration type' with status 'FAILED' 2008-Apr-27 20:37:05 LOG5 end_task: Level: (3) ID = <10290> Status = 0 0 0 1 failed 2008-Apr-27 20:37:05 LOG5 dopset_later: Calling 'dopset_later 0' 2008-Apr-27 20:37:05 INFO3 dopset_later: Setting Doppler correction now 2008-Apr-27 20:37:05 LOG5 antvel: Calling 'antvel 120.660000 9.634541 F 0' 2008-Apr-27 20:37:05 LOG2 antvel: Parameters to Doppler: Heliocentric 88625 2008 118 0.0 2008-Apr-27 20:37:05 INFO5 antvel: Computed antenna velocity: +27.95191 km/s 2008-Apr-27 20:37:05 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=27.951906287100002 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-27 20:37:05 INFO4 dopset_gen: New sky frequencies: 1381.114657 1381.114657 1381.114657 1381.114657 1381.114657 1381.114657 1381.114657 1381.114657 1381.114657 2008-Apr-27 20:37:05 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.114657 sky0=1381.114657 sky1=1381.114657 sky2=1381.114657 sky3=1381.114657 sky4=1381.114657 sky5=1381.114657 sky6=1381.114657 sky7=1381.114657 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-27 20:37:05 LOG2 dopset_gen: Result from 'sky2syn': 1631.114657 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-27 20:37:05 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631114657.0} 2008-Apr-27 20:37:05 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 20:37:05 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-27 20:37:05 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-27 20:37:05 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:59:05.4 Dec = +23:05:04.6 2008-Apr-27 20:37:05 LOG3 track_source: Calling 'track_source AGES3193_p2_033 095905.4 230504.6 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-27 20:37:05 START begin_task: Starting task 'sending tracking commands' 2008-Apr-27 20:37:05 LOG5 begin_task: Level: (3) ID = <10292> Status = 0 0 0 1 failed 2008-Apr-27 20:37:05 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_033} INFO {Slewing to source 'AGES3193_p2_033' ...} 2008-Apr-27 20:37:05 INFO1 track_source: Starting to track AGES3193_p2_033 2008-Apr-27 20:37:05 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_033" 2008-Apr-27 20:37:05 LOG3 vw_send: To DATATAKING: set ra 095905.4 2008-Apr-27 20:37:05 LOG3 vw_send: To DATATAKING: set dec 230504.6 2008-Apr-27 20:37:06 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-27 20:37:06 LOG3 vw_send: To DATATAKING: pnt tr 095905.4 230504.6 -CJ 2008-Apr-27 20:37:06 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 20:37:06 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-27 20:37:06 LOG5 finish_task: Level: (3) ID = <10292> Status = 0 0 0 1 failed 2008-Apr-27 20:37:06 ERROR finish_task: ERROR failed sending: tracking commands 2008-Apr-27 20:37:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Failed 2008-Apr-27 20:37:06 STOP end_task: Finishing task 'sending tracking commands' with status 'FAILED' 2008-Apr-27 20:37:06 LOG5 end_task: Level: (3) ID = <10292> Status = 0 0 0 1 failed 2008-Apr-27 20:37:06 START begin_task: Starting task 'waiting on telescope' 2008-Apr-27 20:37:06 LOG5 begin_task: Level: (3) ID = <10293> Status = 0 0 0 1 failed 2008-Apr-27 20:37:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-27 20:37:06 LOG3 waittrk: Start waittrk 5 2008-Apr-27 20:37:06 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-27 20:37:06 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-27 20:37:06 LOG5 finish_task: Level: (3) ID = <10293> Status = 0 0 0 1 failed 2008-Apr-27 20:37:06 ERROR finish_task: ERROR failed waiting: telescope on source 2008-Apr-27 20:37:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Failed 2008-Apr-27 20:37:06 STOP end_task: Finishing task 'waiting on telescope' with status 'FAILED' 2008-Apr-27 20:37:06 LOG5 end_task: Level: (3) ID = <10293> Status = 0 0 0 1 failed 2008-Apr-27 20:37:06 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-27 20:37:06 LOG5 finish_task: Level: (2) ID = <10283> Status = 0 0 0 1 failed 2008-Apr-27 20:37:06 ERROR finish_task: ERROR failed pattern: fixed azimuth drift map 2008-Apr-27 20:37:06 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2008-Apr-27 20:37:06 END end_task: Finishing task 'fixed azimuth drift map' with status 'FAILED' 2008-Apr-27 20:37:06 LOG5 end_task: Level: (2) ID = <10283> Status = 0 0 0 1 failed 2008-Apr-27 20:37:06 ALERT run_command_file: Stopping command file processing at line 23! 2008-Apr-27 20:37:06 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2008-Apr-27 20:37:06 STOP finish_task: Finishing task 'running command file '080427_obs.cmd'' 2008-Apr-27 20:37:06 LOG5 finish_task: Level: (1) ID = <10282> Status = 0 0 0 1 failed 2008-Apr-27 20:37:06 ERROR finish_task: ERROR failed running: command file '080427_obs.cmd' 2008-Apr-27 20:37:06 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2008-Apr-27 20:37:06 END end_task: Finishing task 'running command file '080427_obs.cmd'' with status 'FAILED' 2008-Apr-27 20:37:06 LOG5 end_task: Level: (1) ID = <10282> Status = 0 0 0 1 failed 2008-Apr-27 20:37:06 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631114657.0} 2008-Apr-27 20:37:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 20:37:06 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_033" 2008-Apr-27 20:37:06 LOG4 got_cormsg: From DATATAKING: set ra 095905.4 2008-Apr-27 20:37:06 LOG4 got_cormsg: From DATATAKING: set dec 230504.6 2008-Apr-27 20:37:06 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-27 20:37:06 LOG4 got_cormsg: From DATATAKING: pnt tr 095905.4 230504.6 -CJ 2008-Apr-27 20:37:06 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 20:37:52 COMMAND CIMA-send_to_exec: Sending command to abort observation 2008-Apr-27 20:37:52 LOG4 exec_msg: From OBSERVER: abort_task abort 2008-Apr-27 20:37:52 WARNING abort_task: WARNING abort requested! 2008-Apr-27 20:37:52 INFO4 bgerror: can't read "task(name0)": no such element in array 2008-Apr-27 20:37:52 INFO4 bgerror: while executing 2008-Apr-27 20:37:52 INFO4 bgerror: "to_log WARNING "WARNING $action $task(name$task(level))"" 2008-Apr-27 20:37:52 INFO4 bgerror: (procedure "abort_task" line 30) 2008-Apr-27 20:37:52 INFO4 bgerror: invoked from within 2008-Apr-27 20:37:52 INFO4 bgerror: "abort_task abort" 2008-Apr-27 20:37:52 INFO4 bgerror: ("eval" body line 1) 2008-Apr-27 20:37:52 INFO4 bgerror: invoked from within 2008-Apr-27 20:37:52 INFO4 bgerror: "eval $msg" 2008-Apr-27 20:37:52 INFO4 bgerror: ("OBSERVER" arm line 8) 2008-Apr-27 20:37:52 INFO4 bgerror: invoked from within 2008-Apr-27 20:37:52 INFO4 bgerror: "switch $name { 2008-Apr-27 20:37:52 INFO4 bgerror: OBSERVER { 2008-Apr-27 20:37:52 INFO4 bgerror: set fst [get_word $msg 1] 2008-Apr-27 20:37:52 INFO4 bgerror: if { [strequal $fst "log_message"] } { 2008-Apr-27 20:37:52 INFO4 bgerror: to_log DEBUG2 "From OBSERVER: $msg"..." 2008-Apr-27 20:37:52 INFO4 bgerror: (procedure "exec_msg" line 35) 2008-Apr-27 20:37:52 INFO4 bgerror: invoked from within 2008-Apr-27 20:37:52 INFO4 bgerror: "exec_msg" 2008-Apr-27 20:37:52 ERROR bgerror: ERROR script run by 'executive' aborted 2008-Apr-27 20:37:52 ERROR bgerror: ERROR reason: can't read "task(name0)": no such element in array 2008-Apr-27 20:37:52 NOTE bgerror: The error occurred while the executive was executing the following task stack: 2008-Apr-27 20:37:52 NOTE query_task: The executive is IDLE 2008-Apr-27 20:37:52 WARNING abort_task: WARNING cleaning up after crash! 2008-Apr-27 20:38:12 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2008-Apr-27 20:38:12 LOG4 exec_msg: From OBSERVER: restart_wapp 2008-Apr-27 20:38:12 LOG5 restart_wapp: Calling 'restart_wapp' 2008-Apr-27 20:38:12 BEGIN begin_task: Starting task 'restarting the WAPPs' 2008-Apr-27 20:38:12 LOG5 begin_task: Level: (1) ID = <10294> Status = 0 0 0 0 ok 2008-Apr-27 20:38:12 NOTE restart_wapp: Restarting all WAPPs 2008-Apr-27 20:38:12 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2008-Apr-27 20:38:12 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2008-Apr-27 20:38:12 LOG5 end_task: Level: (1) ID = <10294> Status = 0 0 0 0 ok 2008-Apr-27 20:38:12 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Apr-27 20:38:12 LOG3 exec_msg: Closing socket 2008-Apr-27 20:38:12 LOG3 exec_msg: Closing socket 2008-Apr-27 20:38:12 LOG3 exec_msg: Closing socket 2008-Apr-27 20:38:12 LOG3 exec_msg: Closing socket 2008-Apr-27 20:38:15 ALERT WAPP=1-wappcon: WAPP1 restarting 2008-Apr-27 20:38:15 ALERT WAPP=2-wappcon: WAPP2 restarting 2008-Apr-27 20:38:15 ALERT WAPP=3-wappcon: WAPP3 restarting 2008-Apr-27 20:38:15 ALERT WAPP=4-wappcon: WAPP4 restarting 2008-Apr-27 20:39:08 INFO1 CIMA-run_command_file: Transferring command file '080427_obs.cmd ' to executive ... 2008-Apr-27 20:39:08 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 3 {LOAD ages_config.conf} 2008-Apr-27 20:39:08 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 4 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5} 2008-Apr-27 20:39:08 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {FIXEDDRIFT az=247.94 alfaangle=-51.5 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_025 ra=95300.00 dec=231700.00} 2008-Apr-27 20:39:08 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 11 {FIXEDDRIFT az=238.55 alfaangle=-38.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_027 ra=95300.00 dec=231400.00} 2008-Apr-27 20:39:08 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 15 {FIXEDDRIFT az=211.83 alfaangle=-9.9 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_029 ra=95300.00 dec=231100.00} 2008-Apr-27 20:39:08 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 19 {FIXEDDRIFT az=147.89 alfaangle=48.5 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_031 ra=95300.00 dec=230800.00} 2008-Apr-27 20:39:08 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 23 {FIXEDDRIFT az=120.66 alfaangle=77.9 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_033 ra=95300.00 dec=230500.00} 2008-Apr-27 20:39:08 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 27 {FIXEDDRIFT az=111.10 alfaangle=-89.2 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_035 ra=95300.00 dec=230200.00} 2008-Apr-27 20:39:08 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 31 {FIXEDDRIFT az=313.92 alfaangle=58.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_079 ra=120900.00 dec=70300.00} 2008-Apr-27 20:39:08 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 35 {FIXEDDRIFT az=333.11 alfaangle=41.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_081 ra=120900.00 dec=70000.00} 2008-Apr-27 20:39:08 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 39 {FIXEDDRIFT az=0.00 alfaangle=19.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_042 ra=120900.00 dec=75830.00} 2008-Apr-27 20:39:08 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 43 {FIXEDDRIFT az=28.83 alfaangle=-5.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_044 ra=120900.00 dec=75530.00} 2008-Apr-27 20:39:08 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 47 {FIXEDDRIFT az=48.22 alfaangle=-22.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_046 ra=120900.00 dec=75230.00} 2008-Apr-27 20:39:08 LOG4 exec_msg: From OBSERVER: store_command_file_line 14 51 {FIXEDDRIFT az=47.62 alfaangle=-21.5 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p1_065 ra=122900.00 dec=72400.00} 2008-Apr-27 20:39:08 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-Apr-27 20:39:08 LOG4 exec_msg: From OBSERVER: run_command_file 080427_obs.cmd 23 1 14 2008-Apr-27 20:39:08 LOG4 run_command_file: Calling 'run_command_file 080427_obs.cmd 23 1 14' 2008-Apr-27 20:39:08 BEGIN begin_task: Starting task 'running command file '080427_obs.cmd'' 2008-Apr-27 20:39:08 LOG5 begin_task: Level: (1) ID = <10295> Status = 0 0 0 0 ok 2008-Apr-27 20:39:08 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '080427_obs.cmd' ...} 2008-Apr-27 20:39:08 NOTE run_command_file: Starting execution of command file '080427_obs.cmd' from line 23 2008-Apr-27 20:39:08 COMMAND run_command_line: EXECUTING command 23: 'FIXEDDRIFT az=120.66 alfaangle=77.9 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_033 ra=95300.00 dec=230500.00' 2008-Apr-27 20:39:08 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-27 20:39:08 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-27 20:39:08 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 120.66 77.9 hcorcal 5 tracking no first 1 AGES3193_p2_033 95300.00 230500.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-27 20:39:08 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-27 20:39:08 LOG5 begin_task: Level: (2) ID = <10296> Status = 0 0 0 0 ok 2008-Apr-27 20:39:08 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES3193_p2_033' 2008-Apr-27 20:39:08 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-27 20:39:08 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p2_033} 2008-Apr-27 20:39:08 INFO3 fixed_driftmap: Sending telescope to Az = 120.66 and ZA = 9.63 2008-Apr-27 20:39:08 LOG3 track_source: Calling 'track_source AGES3193_p2_033 120.66 9.6345413422 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-27 20:39:08 START begin_task: Starting task 'sending tracking commands' 2008-Apr-27 20:39:08 LOG5 begin_task: Level: (3) ID = <10297> Status = 0 0 0 0 ok 2008-Apr-27 20:39:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_033} INFO {Slewing to source 'AGES3193_p2_033' ...} 2008-Apr-27 20:39:09 INFO1 track_source: Starting to track AGES3193_p2_033 2008-Apr-27 20:39:09 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_033" 2008-Apr-27 20:39:09 LOG3 vw_send: To DATATAKING: set ra 120.66 2008-Apr-27 20:39:09 LOG3 vw_send: To DATATAKING: set dec 9.6345413422 2008-Apr-27 20:39:09 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-27 20:39:09 LOG3 vw_send: To DATATAKING: pnt tr 120.66 9.6345413422 -CF 2008-Apr-27 20:39:09 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 20:39:09 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-27 20:39:09 LOG5 finish_task: Level: (3) ID = <10297> Status = 0 0 0 0 ok 2008-Apr-27 20:39:09 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-27 20:39:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 20:39:09 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-27 20:39:09 LOG5 end_task: Level: (3) ID = <10297> Status = 0 0 0 0 ok 2008-Apr-27 20:39:09 START begin_task: Starting task 'rotate ALFA to +77.9 degrees' 2008-Apr-27 20:39:09 LOG5 begin_task: Level: (3) ID = <10298> Status = 0 0 0 0 ok 2008-Apr-27 20:39:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +77.9 degrees ...} 2008-Apr-27 20:39:09 INFO2 rotate_alfa: ALFA commanded to +77.9 degrees 2008-Apr-27 20:39:09 LOG3 sock_errsend: To ALFAMOTOR: POSITION 77.9 REPLY 2008-Apr-27 20:39:09 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-27 20:39:09 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-27 20:39:09 LOG5 begin_task: Level: (4) ID = <10299> Status = 0 0 0 0 ok 2008-Apr-27 20:39:09 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_033" 2008-Apr-27 20:39:09 LOG4 got_cormsg: From DATATAKING: set ra 120.66 2008-Apr-27 20:39:09 LOG4 got_cormsg: From DATATAKING: set dec 9.6345413422 2008-Apr-27 20:39:09 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-27 20:39:09 LOG4 got_cormsg: From DATATAKING: pnt tr 120.66 9.6345413422 -CF 2008-Apr-27 20:39:09 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 20:39:10 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-27 20:39:10 INFO3 alfa_motor: ALFA rotator in-position +77.90 degrees 2008-Apr-27 20:39:10 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-27 20:39:10 LOG5 end_task: Level: (4) ID = <10299> Status = 0 0 0 0 ok 2008-Apr-27 20:39:10 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-27 20:39:10 STOP finish_task: Finishing task 'rotate ALFA to +77.9 degrees' 2008-Apr-27 20:39:10 LOG5 finish_task: Level: (3) ID = <10298> Status = 0 0 0 0 ok 2008-Apr-27 20:39:10 INFO2 finish_task: DONE finished configuration: rotating ALFA to +77.9 degrees 2008-Apr-27 20:39:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 20:39:10 STOP end_task: Finishing task 'rotate ALFA to +77.9 degrees' with status 'OK' 2008-Apr-27 20:39:10 LOG5 end_task: Level: (3) ID = <10298> Status = 0 0 0 0 ok 2008-Apr-27 20:39:10 START begin_task: Starting task 'waiting on telescope' 2008-Apr-27 20:39:10 LOG5 begin_task: Level: (3) ID = <10300> Status = 0 0 0 0 ok 2008-Apr-27 20:39:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-27 20:39:10 LOG3 waittrk: Start waittrk 5 2008-Apr-27 20:39:10 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-27 20:39:10 LOG5 begin_task: Level: (4) ID = <10301> Status = 0 0 0 0 ok 2008-Apr-27 20:39:15 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-27 20:39:15 LOG5 end_task: Level: (4) ID = <10301> Status = 0 0 0 0 ok 2008-Apr-27 20:39:15 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-27 20:39:15 LOG5 begin_task: Level: (4) ID = <10302> Status = 0 0 0 0 ok 2008-Apr-27 20:39:15 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-27 20:39:15 LOG5 end_task: Level: (4) ID = <10302> Status = 0 0 0 0 ok 2008-Apr-27 20:39:15 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-27 20:39:15 INFO2 waittrk: Now tracking AGES3193_p2_033 2008-Apr-27 20:39:15 LOG4 waittrk: Current telescope position: Az = 147.68 ZA = 5.64 2008-Apr-27 20:39:15 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-27 20:39:15 LOG5 finish_task: Level: (3) ID = <10300> Status = 0 0 0 0 ok 2008-Apr-27 20:39:15 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-27 20:39:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 20:39:15 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-27 20:39:15 LOG5 end_task: Level: (3) ID = <10300> Status = 0 0 0 0 ok 2008-Apr-27 20:39:15 START begin_task: Starting task 'selecting calibration type' 2008-Apr-27 20:39:15 LOG5 begin_task: Level: (3) ID = <10303> Status = 0 0 0 0 ok 2008-Apr-27 20:39:15 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-27 20:39:15 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-27 20:39:15 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 20:39:15 START begin_task: Starting task 'waiting on setcal' 2008-Apr-27 20:39:15 LOG5 begin_task: Level: (4) ID = <10304> Status = 0 0 0 0 ok 2008-Apr-27 20:39:15 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-27 20:39:15 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 20:39:25 ERROR end_wait_seconds: ERROR timed out while waiting for setcal! 2008-Apr-27 20:39:25 LOG1 task_failed: Task 'waiting on setcal' failed! 2008-Apr-27 20:39:25 LOG5 task_failed: Level: (4) ID = <10304> Status = 0 0 0 0 ok 2008-Apr-27 20:39:25 STOP end_task: Finishing task 'waiting on setcal' with status 'FAILED' 2008-Apr-27 20:39:25 LOG5 end_task: Level: (4) ID = <10304> Status = 0 0 0 1 failed 2008-Apr-27 20:39:25 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-27 20:39:25 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-27 20:39:25 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-27 20:39:25 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-27 20:39:25 LOG5 finish_task: Level: (3) ID = <10303> Status = 0 0 0 1 failed 2008-Apr-27 20:39:25 ERROR finish_task: ERROR failed configuring: calibration type 2008-Apr-27 20:39:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Failed 2008-Apr-27 20:39:25 STOP end_task: Finishing task 'selecting calibration type' with status 'FAILED' 2008-Apr-27 20:39:25 LOG5 end_task: Level: (3) ID = <10303> Status = 0 0 0 1 failed 2008-Apr-27 20:39:25 LOG5 dopset_later: Calling 'dopset_later 0' 2008-Apr-27 20:39:25 INFO3 dopset_later: Setting Doppler correction now 2008-Apr-27 20:39:25 LOG5 antvel: Calling 'antvel 120.660000 9.634541 F 0' 2008-Apr-27 20:39:25 LOG2 antvel: Parameters to Doppler: Heliocentric 88765 2008 118 0.0 2008-Apr-27 20:39:25 INFO5 antvel: Computed antenna velocity: +27.85959 km/s 2008-Apr-27 20:39:25 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=27.859593602699999 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-27 20:39:25 INFO4 dopset_gen: New sky frequencies: 1381.115082 1381.115082 1381.115082 1381.115082 1381.115082 1381.115082 1381.115082 1381.115082 1381.115082 2008-Apr-27 20:39:25 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.115082 sky0=1381.115082 sky1=1381.115082 sky2=1381.115082 sky3=1381.115082 sky4=1381.115082 sky5=1381.115082 sky6=1381.115082 sky7=1381.115082 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-27 20:39:25 LOG2 dopset_gen: Result from 'sky2syn': 1631.115082 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-27 20:39:25 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631115082.0} 2008-Apr-27 20:39:25 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 20:39:25 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-27 20:39:25 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-27 20:39:25 INFO5 fixed_driftmap: Tracking J2000 position: RA = 10:01:25.8 Dec = +23:05:05.5 2008-Apr-27 20:39:25 LOG3 track_source: Calling 'track_source AGES3193_p2_033 100125.8 230505.5 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-27 20:39:25 START begin_task: Starting task 'sending tracking commands' 2008-Apr-27 20:39:25 LOG5 begin_task: Level: (3) ID = <10305> Status = 0 0 0 1 failed 2008-Apr-27 20:39:25 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_033} INFO {Slewing to source 'AGES3193_p2_033' ...} 2008-Apr-27 20:39:25 INFO1 track_source: Starting to track AGES3193_p2_033 2008-Apr-27 20:39:25 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_033" 2008-Apr-27 20:39:25 LOG3 vw_send: To DATATAKING: set ra 100125.8 2008-Apr-27 20:39:25 LOG3 vw_send: To DATATAKING: set dec 230505.5 2008-Apr-27 20:39:25 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-27 20:39:25 LOG3 vw_send: To DATATAKING: pnt tr 100125.8 230505.5 -CJ 2008-Apr-27 20:39:26 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 20:39:26 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-27 20:39:26 LOG5 finish_task: Level: (3) ID = <10305> Status = 0 0 0 1 failed 2008-Apr-27 20:39:26 ERROR finish_task: ERROR failed sending: tracking commands 2008-Apr-27 20:39:26 LOG4 send_obs_status: To obs_status: <0> ENDTASK Failed 2008-Apr-27 20:39:26 STOP end_task: Finishing task 'sending tracking commands' with status 'FAILED' 2008-Apr-27 20:39:26 LOG5 end_task: Level: (3) ID = <10305> Status = 0 0 0 1 failed 2008-Apr-27 20:39:26 START begin_task: Starting task 'waiting on telescope' 2008-Apr-27 20:39:26 LOG5 begin_task: Level: (3) ID = <10306> Status = 0 0 0 1 failed 2008-Apr-27 20:39:26 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-27 20:39:26 LOG3 waittrk: Start waittrk 5 2008-Apr-27 20:39:26 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-27 20:39:26 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-27 20:39:26 LOG5 finish_task: Level: (3) ID = <10306> Status = 0 0 0 1 failed 2008-Apr-27 20:39:26 ERROR finish_task: ERROR failed waiting: telescope on source 2008-Apr-27 20:39:26 LOG4 send_obs_status: To obs_status: <0> ENDTASK Failed 2008-Apr-27 20:39:26 STOP end_task: Finishing task 'waiting on telescope' with status 'FAILED' 2008-Apr-27 20:39:26 LOG5 end_task: Level: (3) ID = <10306> Status = 0 0 0 1 failed 2008-Apr-27 20:39:26 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-27 20:39:26 LOG5 finish_task: Level: (2) ID = <10296> Status = 0 0 0 1 failed 2008-Apr-27 20:39:26 ERROR finish_task: ERROR failed pattern: fixed azimuth drift map 2008-Apr-27 20:39:26 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2008-Apr-27 20:39:26 END end_task: Finishing task 'fixed azimuth drift map' with status 'FAILED' 2008-Apr-27 20:39:26 LOG5 end_task: Level: (2) ID = <10296> Status = 0 0 0 1 failed 2008-Apr-27 20:39:26 ALERT run_command_file: Stopping command file processing at line 23! 2008-Apr-27 20:39:26 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2008-Apr-27 20:39:26 STOP finish_task: Finishing task 'running command file '080427_obs.cmd'' 2008-Apr-27 20:39:26 LOG5 finish_task: Level: (1) ID = <10295> Status = 0 0 0 1 failed 2008-Apr-27 20:39:26 ERROR finish_task: ERROR failed running: command file '080427_obs.cmd' 2008-Apr-27 20:39:26 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2008-Apr-27 20:39:26 END end_task: Finishing task 'running command file '080427_obs.cmd'' with status 'FAILED' 2008-Apr-27 20:39:26 LOG5 end_task: Level: (1) ID = <10295> Status = 0 0 0 1 failed 2008-Apr-27 20:39:26 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631115082.0} 2008-Apr-27 20:39:26 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 20:39:26 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_033" 2008-Apr-27 20:39:26 LOG4 got_cormsg: From DATATAKING: set ra 100125.8 2008-Apr-27 20:39:26 LOG4 got_cormsg: From DATATAKING: set dec 230505.5 2008-Apr-27 20:39:26 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-27 20:39:26 LOG4 got_cormsg: From DATATAKING: pnt tr 100125.8 230505.5 -CJ 2008-Apr-27 20:39:26 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 20:39:45 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-Apr-27 20:39:45 LOG4 exec_msg: From OBSERVER: run_command_file 080427_obs.cmd 27 1 14 2008-Apr-27 20:39:45 LOG4 run_command_file: Calling 'run_command_file 080427_obs.cmd 27 1 14' 2008-Apr-27 20:39:45 BEGIN begin_task: Starting task 'running command file '080427_obs.cmd'' 2008-Apr-27 20:39:45 LOG5 begin_task: Level: (1) ID = <10307> Status = 0 0 0 0 ok 2008-Apr-27 20:39:45 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '080427_obs.cmd' ...} 2008-Apr-27 20:39:45 NOTE run_command_file: Starting execution of command file '080427_obs.cmd' from line 27 2008-Apr-27 20:39:45 COMMAND run_command_line: EXECUTING command 27: 'FIXEDDRIFT az=111.10 alfaangle=-89.2 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_035 ra=95300.00 dec=230200.00' 2008-Apr-27 20:39:45 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-27 20:39:45 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-27 20:39:45 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 111.10 -89.2 hcorcal 5 tracking no first 1 AGES3193_p2_035 95300.00 230200.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-27 20:39:45 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-27 20:39:45 LOG5 begin_task: Level: (2) ID = <10308> Status = 0 0 0 0 ok 2008-Apr-27 20:39:45 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES3193_p2_033' 2008-Apr-27 20:39:45 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-27 20:39:45 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p2_035} 2008-Apr-27 20:39:45 INFO3 fixed_driftmap: Sending telescope to Az = 111.10 and ZA = 14.55 2008-Apr-27 20:39:45 LOG3 track_source: Calling 'track_source AGES3193_p2_035 111.10 14.5542678103 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-27 20:39:45 START begin_task: Starting task 'sending tracking commands' 2008-Apr-27 20:39:45 LOG5 begin_task: Level: (3) ID = <10309> Status = 0 0 0 0 ok 2008-Apr-27 20:39:45 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_035} INFO {Slewing to source 'AGES3193_p2_035' ...} 2008-Apr-27 20:39:45 INFO1 track_source: Starting to track AGES3193_p2_035 2008-Apr-27 20:39:45 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_035" 2008-Apr-27 20:39:45 LOG3 vw_send: To DATATAKING: set ra 111.10 2008-Apr-27 20:39:46 LOG3 vw_send: To DATATAKING: set dec 14.5542678103 2008-Apr-27 20:39:46 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-27 20:39:46 LOG3 vw_send: To DATATAKING: pnt tr 111.10 14.5542678103 -CF 2008-Apr-27 20:39:46 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 20:39:46 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-27 20:39:46 LOG5 finish_task: Level: (3) ID = <10309> Status = 0 0 0 0 ok 2008-Apr-27 20:39:46 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-27 20:39:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 20:39:46 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-27 20:39:46 LOG5 end_task: Level: (3) ID = <10309> Status = 0 0 0 0 ok 2008-Apr-27 20:39:46 START begin_task: Starting task 'rotate ALFA to -89.2 degrees' 2008-Apr-27 20:39:46 LOG5 begin_task: Level: (3) ID = <10310> Status = 0 0 0 0 ok 2008-Apr-27 20:39:46 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -89.2 degrees ...} 2008-Apr-27 20:39:46 INFO2 rotate_alfa: ALFA commanded to -89.2 degrees 2008-Apr-27 20:39:46 LOG3 sock_errsend: To ALFAMOTOR: POSITION -89.2 REPLY 2008-Apr-27 20:39:46 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-27 20:39:46 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-27 20:39:46 LOG5 begin_task: Level: (4) ID = <10311> Status = 0 0 0 0 ok 2008-Apr-27 20:39:46 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_035" 2008-Apr-27 20:39:46 LOG4 got_cormsg: From DATATAKING: set ra 111.10 2008-Apr-27 20:39:46 LOG4 got_cormsg: From DATATAKING: set dec 14.5542678103 2008-Apr-27 20:39:46 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-27 20:39:46 LOG4 got_cormsg: From DATATAKING: pnt tr 111.10 14.5542678103 -CF 2008-Apr-27 20:39:46 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 20:41:19 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-27 20:41:19 INFO3 alfa_motor: ALFA rotator in-position -89.20 degrees 2008-Apr-27 20:41:19 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-27 20:41:19 LOG5 end_task: Level: (4) ID = <10311> Status = 0 0 0 0 ok 2008-Apr-27 20:41:19 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-27 20:41:19 STOP finish_task: Finishing task 'rotate ALFA to -89.2 degrees' 2008-Apr-27 20:41:19 LOG5 finish_task: Level: (3) ID = <10310> Status = 0 0 0 0 ok 2008-Apr-27 20:41:19 INFO2 finish_task: DONE finished configuration: rotating ALFA to -89.2 degrees 2008-Apr-27 20:41:19 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 20:41:19 STOP end_task: Finishing task 'rotate ALFA to -89.2 degrees' with status 'OK' 2008-Apr-27 20:41:19 LOG5 end_task: Level: (3) ID = <10310> Status = 0 0 0 0 ok 2008-Apr-27 20:41:19 START begin_task: Starting task 'waiting on telescope' 2008-Apr-27 20:41:19 LOG5 begin_task: Level: (3) ID = <10312> Status = 0 0 0 0 ok 2008-Apr-27 20:41:19 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-27 20:41:19 LOG3 waittrk: Start waittrk 5 2008-Apr-27 20:41:19 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-27 20:41:19 LOG5 begin_task: Level: (4) ID = <10313> Status = 0 0 0 0 ok 2008-Apr-27 20:41:24 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-27 20:41:24 LOG5 end_task: Level: (4) ID = <10313> Status = 0 0 0 0 ok 2008-Apr-27 20:41:24 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-27 20:41:24 LOG5 begin_task: Level: (4) ID = <10314> Status = 0 0 0 0 ok 2008-Apr-27 20:41:24 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-27 20:41:24 LOG5 end_task: Level: (4) ID = <10314> Status = 0 0 0 0 ok 2008-Apr-27 20:41:24 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-27 20:41:24 INFO2 waittrk: Now tracking AGES3193_p2_035 2008-Apr-27 20:41:24 LOG4 waittrk: Current telescope position: Az = 147.68 ZA = 5.64 2008-Apr-27 20:41:24 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-27 20:41:24 LOG5 finish_task: Level: (3) ID = <10312> Status = 0 0 0 0 ok 2008-Apr-27 20:41:24 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-27 20:41:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 20:41:24 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-27 20:41:24 LOG5 end_task: Level: (3) ID = <10312> Status = 0 0 0 0 ok 2008-Apr-27 20:41:24 START begin_task: Starting task 'selecting calibration type' 2008-Apr-27 20:41:24 LOG5 begin_task: Level: (3) ID = <10315> Status = 0 0 0 0 ok 2008-Apr-27 20:41:24 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-27 20:41:24 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-27 20:41:24 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 20:41:24 START begin_task: Starting task 'waiting on setcal' 2008-Apr-27 20:41:24 LOG5 begin_task: Level: (4) ID = <10316> Status = 0 0 0 0 ok 2008-Apr-27 20:41:24 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-27 20:41:24 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 20:41:34 ERROR end_wait_seconds: ERROR timed out while waiting for setcal! 2008-Apr-27 20:41:34 LOG1 task_failed: Task 'waiting on setcal' failed! 2008-Apr-27 20:41:34 LOG5 task_failed: Level: (4) ID = <10316> Status = 0 0 0 0 ok 2008-Apr-27 20:41:34 STOP end_task: Finishing task 'waiting on setcal' with status 'FAILED' 2008-Apr-27 20:41:34 LOG5 end_task: Level: (4) ID = <10316> Status = 0 0 0 1 failed 2008-Apr-27 20:41:34 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-27 20:41:34 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-27 20:41:34 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-27 20:41:34 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-27 20:41:34 LOG5 finish_task: Level: (3) ID = <10315> Status = 0 0 0 1 failed 2008-Apr-27 20:41:34 ERROR finish_task: ERROR failed configuring: calibration type 2008-Apr-27 20:41:34 LOG4 send_obs_status: To obs_status: <0> ENDTASK Failed 2008-Apr-27 20:41:34 STOP end_task: Finishing task 'selecting calibration type' with status 'FAILED' 2008-Apr-27 20:41:34 LOG5 end_task: Level: (3) ID = <10315> Status = 0 0 0 1 failed 2008-Apr-27 20:41:34 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2008-Apr-27 20:41:34 INFO2 astwait: Waiting for 688 seconds from 00:41:34 to 00:53:02 UTC ... 2008-Apr-27 20:41:34 LOG4 send_obs_status: To obs_status: <1> TASKTIME 688 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-27 20:41:34 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-27 20:41:34 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-27 20:41:34 LOG5 finish_task: Level: (2) ID = <10308> Status = 0 0 0 1 failed 2008-Apr-27 20:41:34 ERROR finish_task: ERROR failed pattern: fixed azimuth drift map 2008-Apr-27 20:41:34 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2008-Apr-27 20:41:34 END end_task: Finishing task 'fixed azimuth drift map' with status 'FAILED' 2008-Apr-27 20:41:34 LOG5 end_task: Level: (2) ID = <10308> Status = 0 0 0 1 failed 2008-Apr-27 20:41:34 ALERT run_command_file: Stopping command file processing at line 27! 2008-Apr-27 20:41:34 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2008-Apr-27 20:41:34 STOP finish_task: Finishing task 'running command file '080427_obs.cmd'' 2008-Apr-27 20:41:34 LOG5 finish_task: Level: (1) ID = <10307> Status = 0 0 0 1 failed 2008-Apr-27 20:41:34 ERROR finish_task: ERROR failed running: command file '080427_obs.cmd' 2008-Apr-27 20:41:34 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2008-Apr-27 20:41:34 END end_task: Finishing task 'running command file '080427_obs.cmd'' with status 'FAILED' 2008-Apr-27 20:41:34 LOG5 end_task: Level: (1) ID = <10307> Status = 0 0 0 1 failed 2008-Apr-27 20:42:39 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-Apr-27 20:42:39 LOG4 exec_msg: From OBSERVER: run_command_file 080427_obs.cmd 27 1 14 2008-Apr-27 20:42:39 LOG4 run_command_file: Calling 'run_command_file 080427_obs.cmd 27 1 14' 2008-Apr-27 20:42:39 BEGIN begin_task: Starting task 'running command file '080427_obs.cmd'' 2008-Apr-27 20:42:39 LOG5 begin_task: Level: (1) ID = <10317> Status = 0 0 0 0 ok 2008-Apr-27 20:42:39 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '080427_obs.cmd' ...} 2008-Apr-27 20:42:39 NOTE run_command_file: Starting execution of command file '080427_obs.cmd' from line 27 2008-Apr-27 20:42:39 COMMAND run_command_line: EXECUTING command 27: 'FIXEDDRIFT az=111.10 alfaangle=-89.2 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_035 ra=95300.00 dec=230200.00' 2008-Apr-27 20:42:39 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-27 20:42:39 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-27 20:42:39 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 111.10 -89.2 hcorcal 5 tracking no first 1 AGES3193_p2_035 95300.00 230200.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-27 20:42:39 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-27 20:42:39 LOG5 begin_task: Level: (2) ID = <10318> Status = 0 0 0 0 ok 2008-Apr-27 20:42:39 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES3193_p2_035' 2008-Apr-27 20:42:39 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-27 20:42:39 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p2_035} 2008-Apr-27 20:42:39 INFO3 fixed_driftmap: Sending telescope to Az = 111.10 and ZA = 14.55 2008-Apr-27 20:42:39 LOG3 track_source: Calling 'track_source AGES3193_p2_035 111.10 14.5542680210 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-27 20:42:39 START begin_task: Starting task 'sending tracking commands' 2008-Apr-27 20:42:39 LOG5 begin_task: Level: (3) ID = <10319> Status = 0 0 0 0 ok 2008-Apr-27 20:42:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_035} INFO {Slewing to source 'AGES3193_p2_035' ...} 2008-Apr-27 20:42:39 INFO1 track_source: Starting to track AGES3193_p2_035 2008-Apr-27 20:42:39 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_035" 2008-Apr-27 20:42:39 LOG3 vw_send: To DATATAKING: set ra 111.10 2008-Apr-27 20:42:39 LOG3 vw_send: To DATATAKING: set dec 14.5542680210 2008-Apr-27 20:42:39 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-27 20:42:39 LOG3 vw_send: To DATATAKING: pnt tr 111.10 14.5542680210 -CF 2008-Apr-27 20:42:39 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 20:42:39 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-27 20:42:39 LOG5 finish_task: Level: (3) ID = <10319> Status = 0 0 0 0 ok 2008-Apr-27 20:42:39 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-27 20:42:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 20:42:39 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-27 20:42:39 LOG5 end_task: Level: (3) ID = <10319> Status = 0 0 0 0 ok 2008-Apr-27 20:42:39 START begin_task: Starting task 'rotate ALFA to -89.2 degrees' 2008-Apr-27 20:42:39 LOG5 begin_task: Level: (3) ID = <10320> Status = 0 0 0 0 ok 2008-Apr-27 20:42:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -89.2 degrees ...} 2008-Apr-27 20:42:39 INFO2 rotate_alfa: ALFA commanded to -89.2 degrees 2008-Apr-27 20:42:39 LOG3 sock_errsend: To ALFAMOTOR: POSITION -89.2 REPLY 2008-Apr-27 20:42:39 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-27 20:42:39 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-27 20:42:39 LOG5 begin_task: Level: (4) ID = <10321> Status = 0 0 0 0 ok 2008-Apr-27 20:42:39 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_035" 2008-Apr-27 20:42:39 LOG4 got_cormsg: From DATATAKING: set ra 111.10 2008-Apr-27 20:42:39 LOG4 got_cormsg: From DATATAKING: set dec 14.5542680210 2008-Apr-27 20:42:39 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-27 20:42:39 LOG4 got_cormsg: From DATATAKING: pnt tr 111.10 14.5542680210 -CF 2008-Apr-27 20:42:39 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 20:42:40 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-27 20:42:40 INFO3 alfa_motor: ALFA rotator in-position -89.20 degrees 2008-Apr-27 20:42:40 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-27 20:42:40 LOG5 end_task: Level: (4) ID = <10321> Status = 0 0 0 0 ok 2008-Apr-27 20:42:40 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-27 20:42:40 STOP finish_task: Finishing task 'rotate ALFA to -89.2 degrees' 2008-Apr-27 20:42:40 LOG5 finish_task: Level: (3) ID = <10320> Status = 0 0 0 0 ok 2008-Apr-27 20:42:40 INFO2 finish_task: DONE finished configuration: rotating ALFA to -89.2 degrees 2008-Apr-27 20:42:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 20:42:40 STOP end_task: Finishing task 'rotate ALFA to -89.2 degrees' with status 'OK' 2008-Apr-27 20:42:40 LOG5 end_task: Level: (3) ID = <10320> Status = 0 0 0 0 ok 2008-Apr-27 20:42:40 START begin_task: Starting task 'waiting on telescope' 2008-Apr-27 20:42:40 LOG5 begin_task: Level: (3) ID = <10322> Status = 0 0 0 0 ok 2008-Apr-27 20:42:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-27 20:42:40 LOG3 waittrk: Start waittrk 5 2008-Apr-27 20:42:40 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-27 20:42:40 LOG5 begin_task: Level: (4) ID = <10323> Status = 0 0 0 0 ok 2008-Apr-27 20:42:45 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-27 20:42:45 LOG5 end_task: Level: (4) ID = <10323> Status = 0 0 0 0 ok 2008-Apr-27 20:42:45 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-27 20:42:45 LOG5 begin_task: Level: (4) ID = <10324> Status = 0 0 0 0 ok 2008-Apr-27 20:42:45 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-27 20:42:45 LOG5 end_task: Level: (4) ID = <10324> Status = 0 0 0 0 ok 2008-Apr-27 20:42:45 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-27 20:42:45 INFO2 waittrk: Now tracking AGES3193_p2_035 2008-Apr-27 20:42:45 LOG4 waittrk: Current telescope position: Az = 147.68 ZA = 5.64 2008-Apr-27 20:42:45 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-27 20:42:45 LOG5 finish_task: Level: (3) ID = <10322> Status = 0 0 0 0 ok 2008-Apr-27 20:42:45 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-27 20:42:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 20:42:46 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-27 20:42:46 LOG5 end_task: Level: (3) ID = <10322> Status = 0 0 0 0 ok 2008-Apr-27 20:42:46 START begin_task: Starting task 'selecting calibration type' 2008-Apr-27 20:42:46 LOG5 begin_task: Level: (3) ID = <10325> Status = 0 0 0 0 ok 2008-Apr-27 20:42:46 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-27 20:42:46 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-27 20:42:46 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 20:42:46 START begin_task: Starting task 'waiting on setcal' 2008-Apr-27 20:42:46 LOG5 begin_task: Level: (4) ID = <10326> Status = 0 0 0 0 ok 2008-Apr-27 20:42:46 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-27 20:42:46 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 20:42:56 ERROR end_wait_seconds: ERROR timed out while waiting for setcal! 2008-Apr-27 20:42:56 LOG1 task_failed: Task 'waiting on setcal' failed! 2008-Apr-27 20:42:56 LOG5 task_failed: Level: (4) ID = <10326> Status = 0 0 0 0 ok 2008-Apr-27 20:42:56 STOP end_task: Finishing task 'waiting on setcal' with status 'FAILED' 2008-Apr-27 20:42:56 LOG5 end_task: Level: (4) ID = <10326> Status = 0 0 0 1 failed 2008-Apr-27 20:42:56 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-27 20:42:56 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-27 20:42:56 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-27 20:42:56 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-27 20:42:56 LOG5 finish_task: Level: (3) ID = <10325> Status = 0 0 0 1 failed 2008-Apr-27 20:42:56 ERROR finish_task: ERROR failed configuring: calibration type 2008-Apr-27 20:42:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Failed 2008-Apr-27 20:42:56 STOP end_task: Finishing task 'selecting calibration type' with status 'FAILED' 2008-Apr-27 20:42:56 LOG5 end_task: Level: (3) ID = <10325> Status = 0 0 0 1 failed 2008-Apr-27 20:42:56 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2008-Apr-27 20:42:56 INFO2 astwait: Waiting for 606 seconds from 00:42:56 to 00:53:02 UTC ... 2008-Apr-27 20:42:56 LOG4 send_obs_status: To obs_status: <1> TASKTIME 606 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-27 20:42:56 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-27 20:42:56 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-27 20:42:56 LOG5 finish_task: Level: (2) ID = <10318> Status = 0 0 0 1 failed 2008-Apr-27 20:42:56 ERROR finish_task: ERROR failed pattern: fixed azimuth drift map 2008-Apr-27 20:42:56 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2008-Apr-27 20:42:56 END end_task: Finishing task 'fixed azimuth drift map' with status 'FAILED' 2008-Apr-27 20:42:56 LOG5 end_task: Level: (2) ID = <10318> Status = 0 0 0 1 failed 2008-Apr-27 20:42:56 ALERT run_command_file: Stopping command file processing at line 27! 2008-Apr-27 20:42:56 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2008-Apr-27 20:42:56 STOP finish_task: Finishing task 'running command file '080427_obs.cmd'' 2008-Apr-27 20:42:56 LOG5 finish_task: Level: (1) ID = <10317> Status = 0 0 0 1 failed 2008-Apr-27 20:42:56 ERROR finish_task: ERROR failed running: command file '080427_obs.cmd' 2008-Apr-27 20:42:56 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2008-Apr-27 20:42:56 END end_task: Finishing task 'running command file '080427_obs.cmd'' with status 'FAILED' 2008-Apr-27 20:42:56 LOG5 end_task: Level: (1) ID = <10317> Status = 0 0 0 1 failed 2008-Apr-27 20:45:03 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-Apr-27 20:45:03 LOG4 exec_msg: From OBSERVER: run_command_file 080427_obs.cmd 27 1 14 2008-Apr-27 20:45:03 LOG4 run_command_file: Calling 'run_command_file 080427_obs.cmd 27 1 14' 2008-Apr-27 20:45:03 BEGIN begin_task: Starting task 'running command file '080427_obs.cmd'' 2008-Apr-27 20:45:03 LOG5 begin_task: Level: (1) ID = <10327> Status = 0 0 0 0 ok 2008-Apr-27 20:45:03 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '080427_obs.cmd' ...} 2008-Apr-27 20:45:03 NOTE run_command_file: Starting execution of command file '080427_obs.cmd' from line 27 2008-Apr-27 20:45:03 COMMAND run_command_line: EXECUTING command 27: 'FIXEDDRIFT az=111.10 alfaangle=-89.2 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_035 ra=95300.00 dec=230200.00' 2008-Apr-27 20:45:03 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-27 20:45:03 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-27 20:45:03 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 111.10 -89.2 hcorcal 5 tracking no first 1 AGES3193_p2_035 95300.00 230200.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-27 20:45:03 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-27 20:45:03 LOG5 begin_task: Level: (2) ID = <10328> Status = 0 0 0 0 ok 2008-Apr-27 20:45:03 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES3193_p2_035' 2008-Apr-27 20:45:03 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-27 20:45:03 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p2_035} 2008-Apr-27 20:45:03 INFO3 fixed_driftmap: Sending telescope to Az = 111.10 and ZA = 14.55 2008-Apr-27 20:45:03 LOG3 track_source: Calling 'track_source AGES3193_p2_035 111.10 14.5542681974 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-27 20:45:03 START begin_task: Starting task 'sending tracking commands' 2008-Apr-27 20:45:03 LOG5 begin_task: Level: (3) ID = <10329> Status = 0 0 0 0 ok 2008-Apr-27 20:45:03 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_035} INFO {Slewing to source 'AGES3193_p2_035' ...} 2008-Apr-27 20:45:03 INFO1 track_source: Starting to track AGES3193_p2_035 2008-Apr-27 20:45:03 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_035" 2008-Apr-27 20:45:03 LOG3 vw_send: To DATATAKING: set ra 111.10 2008-Apr-27 20:45:03 LOG3 vw_send: To DATATAKING: set dec 14.5542681974 2008-Apr-27 20:45:03 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-27 20:45:03 LOG3 vw_send: To DATATAKING: pnt tr 111.10 14.5542681974 -CF 2008-Apr-27 20:45:03 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 20:45:03 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-27 20:45:03 LOG5 finish_task: Level: (3) ID = <10329> Status = 0 0 0 0 ok 2008-Apr-27 20:45:03 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-27 20:45:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 20:45:03 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-27 20:45:03 LOG5 end_task: Level: (3) ID = <10329> Status = 0 0 0 0 ok 2008-Apr-27 20:45:03 START begin_task: Starting task 'rotate ALFA to -89.2 degrees' 2008-Apr-27 20:45:03 LOG5 begin_task: Level: (3) ID = <10330> Status = 0 0 0 0 ok 2008-Apr-27 20:45:03 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -89.2 degrees ...} 2008-Apr-27 20:45:03 INFO2 rotate_alfa: ALFA commanded to -89.2 degrees 2008-Apr-27 20:45:03 LOG3 sock_errsend: To ALFAMOTOR: POSITION -89.2 REPLY 2008-Apr-27 20:45:03 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-27 20:45:03 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-27 20:45:03 LOG5 begin_task: Level: (4) ID = <10331> Status = 0 0 0 0 ok 2008-Apr-27 20:45:03 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_035" 2008-Apr-27 20:45:03 LOG4 got_cormsg: From DATATAKING: set ra 111.10 2008-Apr-27 20:45:03 LOG4 got_cormsg: From DATATAKING: set dec 14.5542681974 2008-Apr-27 20:45:03 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-27 20:45:03 LOG4 got_cormsg: From DATATAKING: pnt tr 111.10 14.5542681974 -CF 2008-Apr-27 20:45:03 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 20:45:04 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-27 20:45:04 INFO3 alfa_motor: ALFA rotator in-position -89.20 degrees 2008-Apr-27 20:45:04 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-27 20:45:04 LOG5 end_task: Level: (4) ID = <10331> Status = 0 0 0 0 ok 2008-Apr-27 20:45:04 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-27 20:45:04 STOP finish_task: Finishing task 'rotate ALFA to -89.2 degrees' 2008-Apr-27 20:45:04 LOG5 finish_task: Level: (3) ID = <10330> Status = 0 0 0 0 ok 2008-Apr-27 20:45:04 INFO2 finish_task: DONE finished configuration: rotating ALFA to -89.2 degrees 2008-Apr-27 20:45:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 20:45:04 STOP end_task: Finishing task 'rotate ALFA to -89.2 degrees' with status 'OK' 2008-Apr-27 20:45:04 LOG5 end_task: Level: (3) ID = <10330> Status = 0 0 0 0 ok 2008-Apr-27 20:45:04 START begin_task: Starting task 'waiting on telescope' 2008-Apr-27 20:45:04 LOG5 begin_task: Level: (3) ID = <10332> Status = 0 0 0 0 ok 2008-Apr-27 20:45:04 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-27 20:45:04 LOG3 waittrk: Start waittrk 5 2008-Apr-27 20:45:04 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-27 20:45:04 LOG5 begin_task: Level: (4) ID = <10333> Status = 0 0 0 0 ok 2008-Apr-27 20:45:09 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-27 20:45:09 LOG5 end_task: Level: (4) ID = <10333> Status = 0 0 0 0 ok 2008-Apr-27 20:45:09 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-27 20:45:09 LOG5 begin_task: Level: (4) ID = <10334> Status = 0 0 0 0 ok 2008-Apr-27 20:45:10 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-27 20:45:10 LOG5 end_task: Level: (4) ID = <10334> Status = 0 0 0 0 ok 2008-Apr-27 20:45:10 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-27 20:45:10 INFO2 waittrk: Now tracking AGES3193_p2_035 2008-Apr-27 20:45:10 LOG4 waittrk: Current telescope position: Az = 147.68 ZA = 5.64 2008-Apr-27 20:45:10 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-27 20:45:10 LOG5 finish_task: Level: (3) ID = <10332> Status = 0 0 0 0 ok 2008-Apr-27 20:45:10 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-27 20:45:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 20:45:10 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-27 20:45:10 LOG5 end_task: Level: (3) ID = <10332> Status = 0 0 0 0 ok 2008-Apr-27 20:45:10 START begin_task: Starting task 'selecting calibration type' 2008-Apr-27 20:45:10 LOG5 begin_task: Level: (3) ID = <10335> Status = 0 0 0 0 ok 2008-Apr-27 20:45:10 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-27 20:45:10 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-27 20:45:10 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 20:45:10 START begin_task: Starting task 'waiting on setcal' 2008-Apr-27 20:45:10 LOG5 begin_task: Level: (4) ID = <10336> Status = 0 0 0 0 ok 2008-Apr-27 20:45:10 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-27 20:45:10 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 20:45:20 ERROR end_wait_seconds: ERROR timed out while waiting for setcal! 2008-Apr-27 20:45:20 LOG1 task_failed: Task 'waiting on setcal' failed! 2008-Apr-27 20:45:20 LOG5 task_failed: Level: (4) ID = <10336> Status = 0 0 0 0 ok 2008-Apr-27 20:45:20 STOP end_task: Finishing task 'waiting on setcal' with status 'FAILED' 2008-Apr-27 20:45:20 LOG5 end_task: Level: (4) ID = <10336> Status = 0 0 0 1 failed 2008-Apr-27 20:45:20 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-27 20:45:20 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-27 20:45:20 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-27 20:45:20 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-27 20:45:20 LOG5 finish_task: Level: (3) ID = <10335> Status = 0 0 0 1 failed 2008-Apr-27 20:45:20 ERROR finish_task: ERROR failed configuring: calibration type 2008-Apr-27 20:45:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Failed 2008-Apr-27 20:45:20 STOP end_task: Finishing task 'selecting calibration type' with status 'FAILED' 2008-Apr-27 20:45:20 LOG5 end_task: Level: (3) ID = <10335> Status = 0 0 0 1 failed 2008-Apr-27 20:45:20 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2008-Apr-27 20:45:20 INFO2 astwait: Waiting for 462 seconds from 00:45:20 to 00:53:02 UTC ... 2008-Apr-27 20:45:20 LOG4 send_obs_status: To obs_status: <1> TASKTIME 462 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-27 20:45:20 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-27 20:45:20 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-27 20:45:20 LOG5 finish_task: Level: (2) ID = <10328> Status = 0 0 0 1 failed 2008-Apr-27 20:45:20 ERROR finish_task: ERROR failed pattern: fixed azimuth drift map 2008-Apr-27 20:45:20 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2008-Apr-27 20:45:20 END end_task: Finishing task 'fixed azimuth drift map' with status 'FAILED' 2008-Apr-27 20:45:20 LOG5 end_task: Level: (2) ID = <10328> Status = 0 0 0 1 failed 2008-Apr-27 20:45:20 ALERT run_command_file: Stopping command file processing at line 27! 2008-Apr-27 20:45:20 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2008-Apr-27 20:45:20 STOP finish_task: Finishing task 'running command file '080427_obs.cmd'' 2008-Apr-27 20:45:20 LOG5 finish_task: Level: (1) ID = <10327> Status = 0 0 0 1 failed 2008-Apr-27 20:45:20 ERROR finish_task: ERROR failed running: command file '080427_obs.cmd' 2008-Apr-27 20:45:20 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2008-Apr-27 20:45:20 END end_task: Finishing task 'running command file '080427_obs.cmd'' with status 'FAILED' 2008-Apr-27 20:45:20 LOG5 end_task: Level: (1) ID = <10327> Status = 0 0 0 1 failed 2008-Apr-27 20:53:45 ALERT CIMA-exit_cima: Exiting CIMA ... 2008-Apr-27 20:53:45 COMMAND CIMA-send_to_exec: Sending command to move interim correlator data 2008-Apr-27 20:53:45 LOG4 exec_msg: From OBSERVER: vw_send {mvdata a2048} 2008-Apr-27 20:53:45 LOG3 vw_send: To DATATAKING: mvdata a2048 2008-Apr-27 20:53:45 COMMAND CIMA-send_to_exec: Sending command to clear telescope offsets 2008-Apr-27 20:53:45 LOG4 exec_msg: From OBSERVER: vw_send {pnt c setoff 0 0} 2008-Apr-27 20:53:45 LOG3 vw_send: To DATATAKING: pnt c setoff 0 0 2008-Apr-27 20:53:45 NOTE CIMA-exit_cima: Cleaning up session ... 2008-Apr-27 20:53:47 LOG3 exec_msg: Closing socket 2008-Apr-27 20:54:53 BEGIN executive: CIMA executive starting ... 2008-Apr-27 20:54:53 NOTE executive: STARTING NEW CIMA SESSION 2008-Apr-27 20:54:53 INFO1 executive: Using CIMA version 2.3.xx 'unusable' from 2008-04-26 12:28 2008-Apr-27 20:54:53 INFO4 executive: This is an ON-LINE session 2008-Apr-27 20:54:53 INFO4 executive: This is a REMOTE session 2008-Apr-27 20:54:53 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2008-Apr-27 20:54:53 INFO1 executive: CIMA session for project 'a2048' in 'line' mode for 'SS' 2008-Apr-27 20:54:53 INFO2 executive: Logging to '/share/obs4/usr/a2048/a2048.cimalog_20080427' 2008-Apr-27 20:54:54 LOG2 log_preferences: Currently applied preferences: 2008-Apr-27 20:54:54 LOG2 log_preferences: prefs(dailylog) = daily 2008-Apr-27 20:54:54 LOG2 log_preferences: prefs(offlinelog) = skip 2008-Apr-27 20:54:54 LOG2 log_preferences: prefs(datawindow) = ignore 2008-Apr-27 20:54:54 LOG2 log_preferences: prefs(limitwarning) = enabled 2008-Apr-27 20:54:54 LOG2 log_preferences: prefs(wappfailure) = abort 2008-Apr-27 20:54:54 LOG2 log_preferences: prefs(helpstyle) = stay-open 2008-Apr-27 20:54:54 LOG2 log_preferences: prefs(logcolours) = full 2008-Apr-27 20:54:54 LOG2 log_preferences: prefs(displaylevel) = INFO3 2008-Apr-27 20:54:54 LOG2 log_preferences: prefs(loglevel) = LOG5 2008-Apr-27 20:54:54 LOG2 log_preferences: prefs(displayformat) = short 2008-Apr-27 20:54:54 LOG2 log_preferences: prefs(logformat) = new 2008-Apr-27 20:54:54 LOG2 log_preferences: prefs(fontsize) = 4 2008-Apr-27 20:54:54 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2008-Apr-27 20:54:54 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2048 2008-Apr-27 20:54:54 ALERT executive: CIMA executive ready 2008-Apr-27 20:54:56 NOTE frontend: CIMA frontend ready 2008-Apr-27 20:55:03 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2008-Apr-27 20:55:03 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2008-Apr-27 20:55:03 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2008-Apr-27 20:55:03 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2008-Apr-27 20:55:03 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Apr-27 20:55:03 NOTE select_receiver: Starting to select receiver ALFA 2008-Apr-27 20:55:03 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Apr-27 20:55:03 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Apr-27 20:55:03 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Apr-27 20:55:03 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Apr-27 20:55:03 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Apr-27 20:55:03 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Apr-27 20:55:03 DONE finish_task: DONE finished selecting: receiver ALFA 2008-Apr-27 20:55:03 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-27 20:55:03 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Apr-27 20:55:03 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Apr-27 20:55:14 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2008-Apr-27 20:55:14 LOG4 exec_msg: From OBSERVER: restart_wapp 2008-Apr-27 20:55:14 LOG5 restart_wapp: Calling 'restart_wapp' 2008-Apr-27 20:55:14 BEGIN begin_task: Starting task 'restarting the WAPPs' 2008-Apr-27 20:55:14 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Apr-27 20:55:14 NOTE restart_wapp: Restarting all WAPPs 2008-Apr-27 20:55:14 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2008-Apr-27 20:55:14 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2008-Apr-27 20:55:14 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Apr-27 20:55:14 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Apr-27 20:55:16 ALERT WAPP=1-wappcon: WAPP1 restarting 2008-Apr-27 20:55:16 ALERT WAPP=2-wappcon: WAPP2 restarting 2008-Apr-27 20:55:16 ALERT WAPP=3-wappcon: WAPP3 restarting 2008-Apr-27 20:55:16 ALERT WAPP=4-wappcon: WAPP4 restarting 2008-Apr-27 20:56:25 INFO1 CIMA-run_command_file: Transferring command file '080427_obs.cmd ' to executive ... 2008-Apr-27 20:56:25 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 3 {LOAD ages_config.conf} 2008-Apr-27 20:56:25 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 4 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5} 2008-Apr-27 20:56:25 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {FIXEDDRIFT az=247.94 alfaangle=-51.5 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_025 ra=95300.00 dec=231700.00} 2008-Apr-27 20:56:25 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 11 {FIXEDDRIFT az=238.55 alfaangle=-38.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_027 ra=95300.00 dec=231400.00} 2008-Apr-27 20:56:25 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 15 {FIXEDDRIFT az=211.83 alfaangle=-9.9 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_029 ra=95300.00 dec=231100.00} 2008-Apr-27 20:56:25 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 19 {FIXEDDRIFT az=147.89 alfaangle=48.5 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_031 ra=95300.00 dec=230800.00} 2008-Apr-27 20:56:25 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 23 {FIXEDDRIFT az=120.66 alfaangle=77.9 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_033 ra=95300.00 dec=230500.00} 2008-Apr-27 20:56:25 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 27 {FIXEDDRIFT az=111.10 alfaangle=-89.2 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_035 ra=95300.00 dec=230200.00} 2008-Apr-27 20:56:25 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 31 {FIXEDDRIFT az=313.92 alfaangle=58.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_079 ra=120900.00 dec=70300.00} 2008-Apr-27 20:56:25 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 35 {FIXEDDRIFT az=333.11 alfaangle=41.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_081 ra=120900.00 dec=70000.00} 2008-Apr-27 20:56:25 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 39 {FIXEDDRIFT az=0.00 alfaangle=19.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_042 ra=120900.00 dec=75830.00} 2008-Apr-27 20:56:25 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 43 {FIXEDDRIFT az=28.83 alfaangle=-5.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_044 ra=120900.00 dec=75530.00} 2008-Apr-27 20:56:25 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 47 {FIXEDDRIFT az=48.22 alfaangle=-22.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_046 ra=120900.00 dec=75230.00} 2008-Apr-27 20:56:25 LOG4 exec_msg: From OBSERVER: store_command_file_line 14 51 {FIXEDDRIFT az=47.62 alfaangle=-21.5 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p1_065 ra=122900.00 dec=72400.00} 2008-Apr-27 20:56:25 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-Apr-27 20:56:25 LOG4 exec_msg: From OBSERVER: run_command_file 080427_obs.cmd 3 1 14 2008-Apr-27 20:56:25 LOG4 run_command_file: Calling 'run_command_file 080427_obs.cmd 3 1 14' 2008-Apr-27 20:56:25 BEGIN begin_task: Starting task 'running command file '080427_obs.cmd'' 2008-Apr-27 20:56:25 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Apr-27 20:56:25 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '080427_obs.cmd' ...} 2008-Apr-27 20:56:25 NOTE run_command_file: Starting execution of command file '080427_obs.cmd' from line 3 2008-Apr-27 20:56:26 COMMAND run_command_line: EXECUTING command 3: 'LOAD ages_config.conf' 2008-Apr-27 20:56:26 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2008-Apr-27 20:56:26 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-27 20:56:26 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2008-Apr-27 20:56:26 NOTE CIMA-load_config_file: Loading configuration file 'ages_config.conf' 2008-Apr-27 20:56:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Apr-27 20:56:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Apr-27 20:56:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Apr-27 20:56:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Apr-27 20:56:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Apr-27 20:56:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2008-Apr-27 20:56:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Apr-27 20:56:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786" 2008-Apr-27 20:56:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786" 2008-Apr-27 20:56:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786" 2008-Apr-27 20:56:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786" 2008-Apr-27 20:56:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786" 2008-Apr-27 20:56:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786" 2008-Apr-27 20:56:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786" 2008-Apr-27 20:56:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786" 2008-Apr-27 20:56:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786" 2008-Apr-27 20:56:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Apr-27 20:56:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Apr-27 20:56:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Apr-27 20:56:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Apr-27 20:56:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Apr-27 20:56:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Apr-27 20:56:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Apr-27 20:56:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Apr-27 20:56:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Apr-27 20:56:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Apr-27 20:56:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Apr-27 20:56:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Apr-27 20:56:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Apr-27 20:56:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2008-Apr-27 20:56:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Apr-27 20:56:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Apr-27 20:56:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Apr-27 20:56:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Apr-27 20:56:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Apr-27 20:56:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Apr-27 20:56:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Apr-27 20:56:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Apr-27 20:56:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Apr-27 20:56:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1670.405752" 2008-Apr-27 20:56:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Apr-27 20:56:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Apr-27 20:56:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Apr-27 20:56:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Apr-27 20:56:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Apr-27 20:56:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Apr-27 20:56:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Apr-27 20:56:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Apr-27 20:56:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Apr-27 20:56:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Apr-27 20:56:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Apr-27 20:56:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Apr-27 20:56:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Apr-27 20:56:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Apr-27 20:56:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Apr-27 20:56:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Apr-27 20:56:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Apr-27 20:56:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Apr-27 20:56:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Apr-27 20:56:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Apr-27 20:56:27 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Apr-27 20:56:27 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Apr-27 20:56:27 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Apr-27 20:56:27 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Apr-27 20:56:27 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Apr-27 20:56:27 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Apr-27 20:56:27 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Apr-27 20:56:27 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Apr-27 20:56:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Apr-27 20:56:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Apr-27 20:56:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Apr-27 20:56:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Apr-27 20:56:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Apr-27 20:56:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Apr-27 20:56:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Apr-27 20:56:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Apr-27 20:56:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Apr-27 20:56:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Apr-27 20:56:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Apr-27 20:56:28 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-27 20:56:28 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Apr-27 20:56:28 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Apr-27 20:56:28 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Apr-27 20:56:28 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Apr-27 20:56:28 INFO1 config_iflo: Selecting receiver ALFA 2008-Apr-27 20:56:28 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2008-Apr-27 20:56:28 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2008-Apr-27 20:56:28 START begin_task: Starting task 'selecting receiver ALFA' 2008-Apr-27 20:56:28 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Apr-27 20:56:28 NOTE select_receiver: Starting to select receiver ALFA 2008-Apr-27 20:56:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Apr-27 20:56:28 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Apr-27 20:56:28 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Apr-27 20:56:28 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Apr-27 20:56:28 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Apr-27 20:56:28 LOG5 finish_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Apr-27 20:56:28 INFO2 finish_task: DONE finished selecting: receiver ALFA 2008-Apr-27 20:56:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 20:56:28 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Apr-27 20:56:28 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Apr-27 20:56:28 START begin_task: Starting task 'waiting for receiver ALFA' 2008-Apr-27 20:56:28 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2008-Apr-27 20:56:28 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2008-Apr-27 20:56:28 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2008-Apr-27 20:56:28 INFO1 config_iflo: Configuring rest of the IF/LO path 2008-Apr-27 20:56:28 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2008-Apr-27 20:56:28 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 20:56:28 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-27 20:56:28 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 20:56:28 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2008-Apr-27 20:56:29 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 20:56:29 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 20:56:29 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2008-Apr-27 20:56:29 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 20:56:29 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-27 20:56:29 LOG3 vw_send: To DATATAKING: alfafb 1 2008-Apr-27 20:56:29 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2008-Apr-27 20:56:29 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Apr-27 20:56:29 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Apr-27 20:56:29 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2008-Apr-27 20:56:29 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2008-Apr-27 20:56:29 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2008-Apr-27 20:56:29 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1670405752.0} 2008-Apr-27 20:56:29 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2008-Apr-27 20:56:29 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2008-Apr-27 20:56:29 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Apr-27 20:56:29 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Apr-27 20:56:29 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Apr-27 20:56:29 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Apr-27 20:56:29 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Apr-27 20:56:29 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2008-Apr-27 20:56:29 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2008-Apr-27 20:56:29 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2008-Apr-27 20:56:29 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2008-Apr-27 20:56:29 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Apr-27 20:56:29 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2008-Apr-27 20:56:29 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Apr-27 20:56:29 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Apr-27 20:56:29 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 20:56:30 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Apr-27 20:56:30 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2008-Apr-27 20:56:30 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Apr-27 20:56:30 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2008-Apr-27 20:56:30 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2008-Apr-27 20:56:30 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Apr-27 20:56:30 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 20:56:30 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Apr-27 20:56:30 LOG5 begin_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2008-Apr-27 20:57:15 ERROR end_wait_seconds: ERROR timed out while waiting for configuring IF/LO path! 2008-Apr-27 20:57:15 LOG1 task_failed: Task 'waiting on configuring IF/LO path' failed! 2008-Apr-27 20:57:15 LOG5 task_failed: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2008-Apr-27 20:57:15 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'FAILED' 2008-Apr-27 20:57:15 LOG5 end_task: Level: (3) ID = <10008> Status = 0 0 0 1 failed 2008-Apr-27 20:57:15 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Apr-27 20:57:15 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Apr-27 20:57:15 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 0 1 failed 2008-Apr-27 20:57:15 ERROR finish_task: ERROR failed configuration: IF/LO path 2008-Apr-27 20:57:15 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2008-Apr-27 20:57:15 END end_task: Finishing task 'configuring IF/LO path' with status 'FAILED' 2008-Apr-27 20:57:15 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 1 failed 2008-Apr-27 20:57:15 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Apr-27 20:57:15 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 1 failed 2008-Apr-27 20:57:15 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Apr-27 20:57:15 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Apr-27 20:57:15 START begin_task: Starting task 'selecting calibration port' 2008-Apr-27 20:57:15 LOG5 begin_task: Level: (3) ID = <10010> Status = 0 0 0 1 failed 2008-Apr-27 20:57:15 LOG3 vw_send: To DATATAKING: calport 3 2008-Apr-27 20:57:15 STOP finish_task: Finishing task 'selecting calibration port' 2008-Apr-27 20:57:15 LOG5 finish_task: Level: (3) ID = <10010> Status = 0 0 0 1 failed 2008-Apr-27 20:57:15 ERROR finish_task: ERROR failed configuring: calibration port 2008-Apr-27 20:57:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Failed 2008-Apr-27 20:57:15 STOP end_task: Finishing task 'selecting calibration port' with status 'FAILED' 2008-Apr-27 20:57:15 LOG5 end_task: Level: (3) ID = <10010> Status = 0 0 0 1 failed 2008-Apr-27 20:57:15 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Apr-27 20:57:15 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Apr-27 20:57:15 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Apr-27 20:57:15 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Apr-27 20:57:15 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Apr-27 20:57:15 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Apr-27 20:57:15 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Apr-27 20:57:15 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Apr-27 20:57:15 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 SS 2008-Apr-27 20:57:15 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 SS 2008-Apr-27 20:57:15 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 SS 2008-Apr-27 20:57:15 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 SS 2008-Apr-27 20:57:15 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Apr-27 20:57:15 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Apr-27 20:57:15 ERROR is_configured: ERROR the IF/LO path has not been configured! 2008-Apr-27 20:57:15 LOG1 task_failed: Task 'configuring WAPPs' failed! 2008-Apr-27 20:57:15 LOG5 task_failed: Level: (2) ID = <10009> Status = 0 0 0 1 failed 2008-Apr-27 20:57:15 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Apr-27 20:57:15 LOG5 finish_task: Level: (2) ID = <10009> Status = 0 0 0 1 failed 2008-Apr-27 20:57:15 ERROR finish_task: ERROR failed configuring: the WAPPs in ALFA mode 2008-Apr-27 20:57:15 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2008-Apr-27 20:57:15 END end_task: Finishing task 'configuring WAPPs' with status 'FAILED' 2008-Apr-27 20:57:15 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 1 failed 2008-Apr-27 20:57:15 ALERT run_command_file: Stopping command file processing at line 3! 2008-Apr-27 20:57:15 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2008-Apr-27 20:57:15 STOP finish_task: Finishing task 'running command file '080427_obs.cmd'' 2008-Apr-27 20:57:15 LOG5 finish_task: Level: (1) ID = <10003> Status = 0 0 0 1 failed 2008-Apr-27 20:57:15 ERROR finish_task: ERROR failed running: command file '080427_obs.cmd' 2008-Apr-27 20:57:15 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2008-Apr-27 20:57:15 END end_task: Finishing task 'running command file '080427_obs.cmd'' with status 'FAILED' 2008-Apr-27 20:57:15 LOG5 end_task: Level: (1) ID = <10003> Status = 0 0 0 1 failed 2008-Apr-27 20:57:16 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-27 20:57:16 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-27 20:57:16 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-27 20:57:16 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Apr-27 20:57:16 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Apr-27 20:57:16 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 SS' 2008-Apr-27 20:58:16 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-Apr-27 20:58:16 LOG4 exec_msg: From OBSERVER: run_command_file 080427_obs.cmd 3 1 14 2008-Apr-27 20:58:16 LOG4 run_command_file: Calling 'run_command_file 080427_obs.cmd 3 1 14' 2008-Apr-27 20:58:16 BEGIN begin_task: Starting task 'running command file '080427_obs.cmd'' 2008-Apr-27 20:58:16 LOG5 begin_task: Level: (1) ID = <10011> Status = 0 0 0 0 ok 2008-Apr-27 20:58:16 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '080427_obs.cmd' ...} 2008-Apr-27 20:58:16 NOTE run_command_file: Starting execution of command file '080427_obs.cmd' from line 3 2008-Apr-27 20:58:16 COMMAND run_command_line: EXECUTING command 3: 'LOAD ages_config.conf' 2008-Apr-27 20:58:16 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2008-Apr-27 20:58:16 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-27 20:58:16 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2008-Apr-27 20:58:16 NOTE CIMA-load_config_file: Loading configuration file 'ages_config.conf' 2008-Apr-27 20:58:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Apr-27 20:58:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Apr-27 20:58:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Apr-27 20:58:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Apr-27 20:58:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Apr-27 20:58:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2008-Apr-27 20:58:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Apr-27 20:58:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786" 2008-Apr-27 20:58:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786" 2008-Apr-27 20:58:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786" 2008-Apr-27 20:58:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786" 2008-Apr-27 20:58:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786" 2008-Apr-27 20:58:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786" 2008-Apr-27 20:58:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786" 2008-Apr-27 20:58:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786" 2008-Apr-27 20:58:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786" 2008-Apr-27 20:58:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Apr-27 20:58:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Apr-27 20:58:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Apr-27 20:58:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Apr-27 20:58:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Apr-27 20:58:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Apr-27 20:58:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Apr-27 20:58:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Apr-27 20:58:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Apr-27 20:58:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Apr-27 20:58:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Apr-27 20:58:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Apr-27 20:58:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Apr-27 20:58:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2008-Apr-27 20:58:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Apr-27 20:58:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Apr-27 20:58:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Apr-27 20:58:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Apr-27 20:58:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Apr-27 20:58:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Apr-27 20:58:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Apr-27 20:58:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Apr-27 20:58:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Apr-27 20:58:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1670.405752" 2008-Apr-27 20:58:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Apr-27 20:58:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Apr-27 20:58:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Apr-27 20:58:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Apr-27 20:58:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Apr-27 20:58:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Apr-27 20:58:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Apr-27 20:58:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Apr-27 20:58:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Apr-27 20:58:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Apr-27 20:58:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Apr-27 20:58:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Apr-27 20:58:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Apr-27 20:58:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Apr-27 20:58:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Apr-27 20:58:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Apr-27 20:58:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Apr-27 20:58:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Apr-27 20:58:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Apr-27 20:58:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Apr-27 20:58:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Apr-27 20:58:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Apr-27 20:58:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Apr-27 20:58:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Apr-27 20:58:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Apr-27 20:58:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Apr-27 20:58:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Apr-27 20:58:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Apr-27 20:58:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Apr-27 20:58:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Apr-27 20:58:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Apr-27 20:58:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Apr-27 20:58:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Apr-27 20:58:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Apr-27 20:58:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Apr-27 20:58:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Apr-27 20:58:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Apr-27 20:58:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Apr-27 20:58:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Apr-27 20:58:19 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-27 20:58:19 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Apr-27 20:58:19 LOG5 begin_task: Level: (2) ID = <10012> Status = 0 0 0 0 ok 2008-Apr-27 20:58:19 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Apr-27 20:58:19 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Apr-27 20:58:19 INFO1 config_iflo: Selecting receiver ALFA 2008-Apr-27 20:58:19 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2008-Apr-27 20:58:19 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2008-Apr-27 20:58:19 START begin_task: Starting task 'selecting receiver ALFA' 2008-Apr-27 20:58:19 LOG5 begin_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2008-Apr-27 20:58:19 NOTE select_receiver: Starting to select receiver ALFA 2008-Apr-27 20:58:19 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Apr-27 20:58:19 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Apr-27 20:58:19 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Apr-27 20:58:19 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Apr-27 20:58:19 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Apr-27 20:58:19 LOG5 finish_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2008-Apr-27 20:58:19 INFO2 finish_task: DONE finished selecting: receiver ALFA 2008-Apr-27 20:58:19 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 20:58:19 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Apr-27 20:58:19 LOG5 end_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2008-Apr-27 20:58:19 START begin_task: Starting task 'waiting for receiver ALFA' 2008-Apr-27 20:58:19 LOG5 begin_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2008-Apr-27 20:58:19 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2008-Apr-27 20:58:19 LOG5 end_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2008-Apr-27 20:58:19 INFO1 config_iflo: Configuring rest of the IF/LO path 2008-Apr-27 20:58:19 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2008-Apr-27 20:58:19 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 20:58:19 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-27 20:58:19 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 20:58:19 LOG5 begin_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2008-Apr-27 20:58:19 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 20:58:19 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 20:58:19 LOG5 end_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2008-Apr-27 20:58:19 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 20:58:19 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-27 20:58:19 LOG3 vw_send: To DATATAKING: alfafb 1 2008-Apr-27 20:58:19 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2008-Apr-27 20:58:19 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Apr-27 20:58:19 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Apr-27 20:58:19 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2008-Apr-27 20:58:19 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2008-Apr-27 20:58:19 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2008-Apr-27 20:58:19 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1670405752.0} 2008-Apr-27 20:58:19 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2008-Apr-27 20:58:19 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2008-Apr-27 20:58:19 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Apr-27 20:58:19 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Apr-27 20:58:19 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Apr-27 20:58:19 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Apr-27 20:58:19 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Apr-27 20:58:19 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2008-Apr-27 20:58:19 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2008-Apr-27 20:58:19 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2008-Apr-27 20:58:19 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2008-Apr-27 20:58:19 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Apr-27 20:58:19 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2008-Apr-27 20:58:19 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Apr-27 20:58:19 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Apr-27 20:58:19 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 20:58:19 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Apr-27 20:58:19 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2008-Apr-27 20:58:19 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Apr-27 20:58:19 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2008-Apr-27 20:58:20 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2008-Apr-27 20:58:20 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Apr-27 20:58:20 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 20:58:20 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Apr-27 20:58:20 LOG5 begin_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2008-Apr-27 20:58:33 LOG4 got_cormsg: From DATATAKING: cor: Connection timed out 2008-Apr-27 20:58:33 LOG3 exec_msg: Closing socket 2008-Apr-27 20:59:05 ERROR end_wait_seconds: ERROR timed out while waiting for configuring IF/LO path! 2008-Apr-27 20:59:05 LOG1 task_failed: Task 'waiting on configuring IF/LO path' failed! 2008-Apr-27 20:59:05 LOG5 task_failed: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2008-Apr-27 20:59:05 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'FAILED' 2008-Apr-27 20:59:05 LOG5 end_task: Level: (3) ID = <10016> Status = 0 0 0 1 failed 2008-Apr-27 20:59:05 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Apr-27 20:59:05 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Apr-27 20:59:05 LOG5 finish_task: Level: (2) ID = <10012> Status = 0 0 0 1 failed 2008-Apr-27 20:59:05 ERROR finish_task: ERROR failed configuration: IF/LO path 2008-Apr-27 20:59:05 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2008-Apr-27 20:59:05 END end_task: Finishing task 'configuring IF/LO path' with status 'FAILED' 2008-Apr-27 20:59:05 LOG5 end_task: Level: (2) ID = <10012> Status = 0 0 0 1 failed 2008-Apr-27 20:59:05 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Apr-27 20:59:05 LOG5 begin_task: Level: (2) ID = <10017> Status = 0 0 0 1 failed 2008-Apr-27 20:59:05 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Apr-27 20:59:05 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Apr-27 20:59:05 START begin_task: Starting task 'selecting calibration port' 2008-Apr-27 20:59:05 LOG5 begin_task: Level: (3) ID = <10018> Status = 0 0 0 1 failed 2008-Apr-27 20:59:05 LOG3 vw_send: To DATATAKING: calport 3 2008-Apr-27 20:59:05 ERROR vw_send: ERROR failed to send to DATATAKING: calport 3 2008-Apr-27 20:59:05 LOG1 task_failed: Task 'selecting calibration port' failed! 2008-Apr-27 20:59:05 LOG5 task_failed: Level: (3) ID = <10018> Status = 0 0 0 1 failed 2008-Apr-27 20:59:05 STOP finish_task: Finishing task 'selecting calibration port' 2008-Apr-27 20:59:05 LOG5 finish_task: Level: (3) ID = <10018> Status = 0 0 0 1 failed 2008-Apr-27 20:59:05 ERROR finish_task: ERROR failed configuring: calibration port 2008-Apr-27 20:59:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Failed 2008-Apr-27 20:59:05 STOP end_task: Finishing task 'selecting calibration port' with status 'FAILED' 2008-Apr-27 20:59:05 LOG5 end_task: Level: (3) ID = <10018> Status = 0 0 0 1 failed 2008-Apr-27 20:59:05 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Apr-27 20:59:05 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Apr-27 20:59:05 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Apr-27 20:59:05 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Apr-27 20:59:05 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Apr-27 20:59:05 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Apr-27 20:59:05 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Apr-27 20:59:05 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Apr-27 20:59:05 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 SS 2008-Apr-27 20:59:05 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 SS 2008-Apr-27 20:59:05 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 SS 2008-Apr-27 20:59:05 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 SS 2008-Apr-27 20:59:05 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Apr-27 20:59:05 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Apr-27 20:59:05 LOG3 sock_errsend: To WAPPDATA: FLUSH 2008-Apr-27 20:59:05 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Apr-27 20:59:05 LOG5 finish_task: Level: (2) ID = <10017> Status = 0 0 0 1 failed 2008-Apr-27 20:59:05 ERROR finish_task: ERROR failed configuring: the WAPPs in ALFA mode 2008-Apr-27 20:59:05 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2008-Apr-27 20:59:05 END end_task: Finishing task 'configuring WAPPs' with status 'FAILED' 2008-Apr-27 20:59:05 LOG5 end_task: Level: (2) ID = <10017> Status = 0 0 0 1 failed 2008-Apr-27 20:59:05 ALERT run_command_file: Stopping command file processing at line 3! 2008-Apr-27 20:59:05 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2008-Apr-27 20:59:05 STOP finish_task: Finishing task 'running command file '080427_obs.cmd'' 2008-Apr-27 20:59:05 LOG5 finish_task: Level: (1) ID = <10011> Status = 0 0 0 1 failed 2008-Apr-27 20:59:05 ERROR finish_task: ERROR failed running: command file '080427_obs.cmd' 2008-Apr-27 20:59:05 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2008-Apr-27 20:59:05 END end_task: Finishing task 'running command file '080427_obs.cmd'' with status 'FAILED' 2008-Apr-27 20:59:05 LOG5 end_task: Level: (1) ID = <10011> Status = 0 0 0 1 failed 2008-Apr-27 20:59:05 LOG3 exec_msg: Closing socket 2008-Apr-27 20:59:05 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Apr-27 20:59:05 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-27 20:59:06 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-27 20:59:06 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Apr-27 20:59:06 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Apr-27 20:59:06 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 SS' 2008-Apr-27 20:59:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Apr-27 20:59:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Apr-27 20:59:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Apr-27 20:59:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Apr-27 20:59:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Apr-27 20:59:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Apr-27 20:59:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Apr-27 20:59:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Apr-27 20:59:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Apr-27 20:59:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Apr-27 20:59:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Apr-27 20:59:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Apr-27 20:59:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Apr-27 20:59:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Apr-27 20:59:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Apr-27 20:59:59 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2008-Apr-27 20:59:59 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2008-Apr-27 20:59:59 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Apr-27 20:59:59 LOG5 begin_task: Level: (1) ID = <10019> Status = 0 0 0 0 ok 2008-Apr-27 20:59:59 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Apr-27 20:59:59 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Apr-27 20:59:59 START begin_task: Starting task 'selecting calibration port' 2008-Apr-27 20:59:59 LOG5 begin_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2008-Apr-27 20:59:59 LOG3 vw_send: To DATATAKING: calport 3 2008-Apr-27 20:59:59 ERROR vw_send: ERROR failed to send to DATATAKING: calport 3 2008-Apr-27 20:59:59 LOG1 task_failed: Task 'selecting calibration port' failed! 2008-Apr-27 20:59:59 LOG5 task_failed: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2008-Apr-27 20:59:59 STOP finish_task: Finishing task 'selecting calibration port' 2008-Apr-27 20:59:59 LOG5 finish_task: Level: (2) ID = <10020> Status = 0 0 0 1 failed 2008-Apr-27 20:59:59 ERROR finish_task: ERROR failed configuring: calibration port 2008-Apr-27 20:59:59 LOG4 send_obs_status: To obs_status: <0> ENDTASK Failed 2008-Apr-27 20:59:59 STOP end_task: Finishing task 'selecting calibration port' with status 'FAILED' 2008-Apr-27 20:59:59 LOG5 end_task: Level: (2) ID = <10020> Status = 0 0 0 1 failed 2008-Apr-27 20:59:59 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Apr-27 21:00:00 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Apr-27 21:00:00 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Apr-27 21:00:00 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Apr-27 21:00:00 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Apr-27 21:00:00 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Apr-27 21:00:00 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Apr-27 21:00:00 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Apr-27 21:00:00 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 SS 2008-Apr-27 21:00:00 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 SS 2008-Apr-27 21:00:00 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 SS 2008-Apr-27 21:00:00 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 SS 2008-Apr-27 21:00:00 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Apr-27 21:00:00 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Apr-27 21:00:00 LOG3 sock_errsend: To WAPPDATA: FLUSH 2008-Apr-27 21:00:00 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Apr-27 21:00:00 LOG5 finish_task: Level: (1) ID = <10019> Status = 0 0 0 1 failed 2008-Apr-27 21:00:00 ERROR finish_task: ERROR failed configuring: the WAPPs in ALFA mode 2008-Apr-27 21:00:00 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2008-Apr-27 21:00:00 END end_task: Finishing task 'configuring WAPPs' with status 'FAILED' 2008-Apr-27 21:00:00 LOG5 end_task: Level: (1) ID = <10019> Status = 0 0 0 1 failed 2008-Apr-27 21:00:00 LOG3 exec_msg: Closing socket 2008-Apr-27 21:00:00 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Apr-27 21:00:00 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-27 21:00:00 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-27 21:00:00 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Apr-27 21:00:00 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Apr-27 21:00:00 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 SS' 2008-Apr-27 21:03:40 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 21:03:40.297 (seconds: 75820.297)!} 2008-Apr-27 21:03:40 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 21:03:40.297 (seconds: 75820.297)! 2008-Apr-27 21:26:18 ALERT CIMA-exit_cima: Exiting CIMA ... 2008-Apr-27 21:26:18 COMMAND CIMA-send_to_exec: Sending command to move interim correlator data 2008-Apr-27 21:26:18 LOG4 exec_msg: From OBSERVER: vw_send {mvdata a2048} 2008-Apr-27 21:26:18 LOG3 vw_send: To DATATAKING: mvdata a2048 2008-Apr-27 21:26:18 ERROR vw_send: ERROR failed to send to DATATAKING: mvdata a2048 2008-Apr-27 21:26:18 LOG3 exec_msg: Closing socket 2008-Apr-27 21:26:18 LOG4 exec_msg: From OBSERVER: vw_send {pnt c setoff 0 0} 2008-Apr-27 21:26:18 LOG3 vw_send: To DATATAKING: pnt c setoff 0 0 2008-Apr-27 21:26:18 ERROR vw_send: ERROR failed to send to DATATAKING: pnt c setoff 0 0 2008-Apr-27 21:26:18 LOG3 exec_msg: Closing socket 2008-Apr-27 21:27:32 BEGIN executive: CIMA executive starting ... 2008-Apr-27 21:27:32 NOTE executive: STARTING NEW CIMA SESSION 2008-Apr-27 21:27:32 INFO1 executive: Using CIMA version 2.3.xx 'unusable' from 2008-04-26 12:28 2008-Apr-27 21:27:32 INFO4 executive: This is an ON-LINE session 2008-Apr-27 21:27:32 INFO4 executive: This is a REMOTE session 2008-Apr-27 21:27:32 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2008-Apr-27 21:27:32 INFO1 executive: CIMA session for project 'a2048' in 'line' mode for 'ss' 2008-Apr-27 21:27:32 INFO2 executive: Logging to '/share/obs4/usr/a2048/a2048.cimalog_20080427' 2008-Apr-27 21:27:33 LOG2 log_preferences: Currently applied preferences: 2008-Apr-27 21:27:33 LOG2 log_preferences: prefs(dailylog) = daily 2008-Apr-27 21:27:33 LOG2 log_preferences: prefs(offlinelog) = skip 2008-Apr-27 21:27:33 LOG2 log_preferences: prefs(datawindow) = ignore 2008-Apr-27 21:27:33 LOG2 log_preferences: prefs(limitwarning) = enabled 2008-Apr-27 21:27:33 LOG2 log_preferences: prefs(wappfailure) = abort 2008-Apr-27 21:27:33 LOG2 log_preferences: prefs(helpstyle) = stay-open 2008-Apr-27 21:27:33 LOG2 log_preferences: prefs(logcolours) = full 2008-Apr-27 21:27:33 LOG2 log_preferences: prefs(displaylevel) = INFO3 2008-Apr-27 21:27:33 LOG2 log_preferences: prefs(loglevel) = LOG5 2008-Apr-27 21:27:33 LOG2 log_preferences: prefs(displayformat) = short 2008-Apr-27 21:27:33 LOG2 log_preferences: prefs(logformat) = new 2008-Apr-27 21:27:33 LOG2 log_preferences: prefs(fontsize) = 4 2008-Apr-27 21:27:33 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2008-Apr-27 21:27:33 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2048 2008-Apr-27 21:27:33 ALERT executive: CIMA executive ready 2008-Apr-27 21:27:36 NOTE frontend: CIMA frontend ready 2008-Apr-27 21:27:38 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0xd 2008-Apr-27 21:27:38 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0xd' 2008-Apr-27 21:27:38 LOG4 got_cormsg: From DATATAKING: vw% io 2008-Apr-27 21:27:38 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2008-Apr-27 21:27:38 LOG4 got_cormsg: From DATATAKING: 2008-Apr-27 21:27:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 21:27:38 LOG4 got_cormsg: From DATATAKING: tape stat 2008-Apr-27 21:27:38 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2008-Apr-27 21:27:38 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2008-Apr-27 21:27:38 LOG4 got_cormsg: From DATATAKING: vw% connectall 2008-Apr-27 21:27:38 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2008-Apr-27 21:27:38 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2008-Apr-27 21:27:38 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2008-Apr-27 21:27:38 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2008-Apr-27 21:27:38 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2008-Apr-27 21:27:38 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2008-Apr-27 21:27:38 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2008-Apr-27 21:27:38 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2008-Apr-27 21:27:38 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2048 2008-Apr-27 21:27:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 21:27:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 21:27:44 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2008-Apr-27 21:27:44 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2008-Apr-27 21:27:44 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2008-Apr-27 21:27:44 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2008-Apr-27 21:27:44 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Apr-27 21:27:44 NOTE select_receiver: Starting to select receiver ALFA 2008-Apr-27 21:27:44 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Apr-27 21:27:44 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Apr-27 21:27:44 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Apr-27 21:27:44 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Apr-27 21:27:44 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Apr-27 21:27:44 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Apr-27 21:27:44 DONE finish_task: DONE finished selecting: receiver ALFA 2008-Apr-27 21:27:44 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-27 21:27:44 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Apr-27 21:27:44 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Apr-27 21:27:44 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Apr-27 21:27:44 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Apr-27 21:27:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 21:27:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 21:28:00 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2008-Apr-27 21:28:00 LOG4 exec_msg: From OBSERVER: restart_wapp 2008-Apr-27 21:28:00 LOG5 restart_wapp: Calling 'restart_wapp' 2008-Apr-27 21:28:00 BEGIN begin_task: Starting task 'restarting the WAPPs' 2008-Apr-27 21:28:00 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Apr-27 21:28:00 NOTE restart_wapp: Restarting all WAPPs 2008-Apr-27 21:28:00 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2008-Apr-27 21:28:00 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2008-Apr-27 21:28:00 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Apr-27 21:28:00 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Apr-27 21:28:03 ALERT WAPP=2-wappcon: WAPP2 restarting 2008-Apr-27 21:28:03 ALERT WAPP=1-wappcon: WAPP1 restarting 2008-Apr-27 21:28:03 ALERT WAPP=4-wappcon: WAPP4 restarting 2008-Apr-27 21:28:03 ALERT WAPP=3-wappcon: WAPP3 restarting 2008-Apr-27 21:29:07 INFO1 CIMA-run_command_file: Transferring command file '080427_obs.cmd ' to executive ... 2008-Apr-27 21:29:07 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 3 {LOAD ages_config.conf} 2008-Apr-27 21:29:07 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 4 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5} 2008-Apr-27 21:29:07 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {FIXEDDRIFT az=247.94 alfaangle=-51.5 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_025 ra=95300.00 dec=231700.00} 2008-Apr-27 21:29:07 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 11 {FIXEDDRIFT az=238.55 alfaangle=-38.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_027 ra=95300.00 dec=231400.00} 2008-Apr-27 21:29:07 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 15 {FIXEDDRIFT az=211.83 alfaangle=-9.9 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_029 ra=95300.00 dec=231100.00} 2008-Apr-27 21:29:07 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 19 {FIXEDDRIFT az=147.89 alfaangle=48.5 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_031 ra=95300.00 dec=230800.00} 2008-Apr-27 21:29:07 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 23 {FIXEDDRIFT az=120.66 alfaangle=77.9 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_033 ra=95300.00 dec=230500.00} 2008-Apr-27 21:29:07 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 27 {FIXEDDRIFT az=111.10 alfaangle=-89.2 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_035 ra=95300.00 dec=230200.00} 2008-Apr-27 21:29:07 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 31 {FIXEDDRIFT az=313.92 alfaangle=58.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_079 ra=120900.00 dec=70300.00} 2008-Apr-27 21:29:07 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 35 {FIXEDDRIFT az=333.11 alfaangle=41.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_081 ra=120900.00 dec=70000.00} 2008-Apr-27 21:29:07 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 39 {FIXEDDRIFT az=0.00 alfaangle=19.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_042 ra=120900.00 dec=75830.00} 2008-Apr-27 21:29:07 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 43 {FIXEDDRIFT az=28.83 alfaangle=-5.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_044 ra=120900.00 dec=75530.00} 2008-Apr-27 21:29:07 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 47 {FIXEDDRIFT az=48.22 alfaangle=-22.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_046 ra=120900.00 dec=75230.00} 2008-Apr-27 21:29:07 LOG4 exec_msg: From OBSERVER: store_command_file_line 14 51 {FIXEDDRIFT az=47.62 alfaangle=-21.5 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p1_065 ra=122900.00 dec=72400.00} 2008-Apr-27 21:29:07 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-Apr-27 21:29:07 LOG4 exec_msg: From OBSERVER: run_command_file 080427_obs.cmd 1 1 14 2008-Apr-27 21:29:07 LOG4 run_command_file: Calling 'run_command_file 080427_obs.cmd 1 1 14' 2008-Apr-27 21:29:07 BEGIN begin_task: Starting task 'running command file '080427_obs.cmd'' 2008-Apr-27 21:29:08 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Apr-27 21:29:08 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '080427_obs.cmd' ...} 2008-Apr-27 21:29:08 NOTE run_command_file: Starting execution of command file '080427_obs.cmd' from line 1 2008-Apr-27 21:29:08 COMMAND run_command_line: EXECUTING command 3: 'LOAD ages_config.conf' 2008-Apr-27 21:29:08 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2008-Apr-27 21:29:08 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-27 21:29:08 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2008-Apr-27 21:29:08 NOTE CIMA-load_config_file: Loading configuration file 'ages_config.conf' 2008-Apr-27 21:29:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Apr-27 21:29:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Apr-27 21:29:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Apr-27 21:29:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Apr-27 21:29:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Apr-27 21:29:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2008-Apr-27 21:29:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Apr-27 21:29:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786" 2008-Apr-27 21:29:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786" 2008-Apr-27 21:29:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786" 2008-Apr-27 21:29:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786" 2008-Apr-27 21:29:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786" 2008-Apr-27 21:29:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786" 2008-Apr-27 21:29:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786" 2008-Apr-27 21:29:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786" 2008-Apr-27 21:29:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786" 2008-Apr-27 21:29:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Apr-27 21:29:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Apr-27 21:29:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Apr-27 21:29:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Apr-27 21:29:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Apr-27 21:29:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Apr-27 21:29:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Apr-27 21:29:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Apr-27 21:29:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Apr-27 21:29:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Apr-27 21:29:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Apr-27 21:29:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Apr-27 21:29:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Apr-27 21:29:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2008-Apr-27 21:29:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Apr-27 21:29:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Apr-27 21:29:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Apr-27 21:29:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Apr-27 21:29:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Apr-27 21:29:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Apr-27 21:29:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Apr-27 21:29:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Apr-27 21:29:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Apr-27 21:29:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1670.405752" 2008-Apr-27 21:29:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Apr-27 21:29:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Apr-27 21:29:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Apr-27 21:29:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Apr-27 21:29:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Apr-27 21:29:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Apr-27 21:29:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Apr-27 21:29:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Apr-27 21:29:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Apr-27 21:29:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Apr-27 21:29:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Apr-27 21:29:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Apr-27 21:29:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Apr-27 21:29:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Apr-27 21:29:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Apr-27 21:29:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Apr-27 21:29:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Apr-27 21:29:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Apr-27 21:29:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Apr-27 21:29:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Apr-27 21:29:09 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Apr-27 21:29:09 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Apr-27 21:29:09 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Apr-27 21:29:09 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Apr-27 21:29:09 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Apr-27 21:29:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Apr-27 21:29:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Apr-27 21:29:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Apr-27 21:29:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Apr-27 21:29:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Apr-27 21:29:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Apr-27 21:29:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Apr-27 21:29:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Apr-27 21:29:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Apr-27 21:29:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Apr-27 21:29:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Apr-27 21:29:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Apr-27 21:29:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Apr-27 21:29:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Apr-27 21:29:10 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-27 21:29:10 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Apr-27 21:29:10 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Apr-27 21:29:10 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Apr-27 21:29:10 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Apr-27 21:29:10 INFO1 config_iflo: Selecting receiver ALFA 2008-Apr-27 21:29:10 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2008-Apr-27 21:29:10 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2008-Apr-27 21:29:10 START begin_task: Starting task 'selecting receiver ALFA' 2008-Apr-27 21:29:10 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Apr-27 21:29:10 NOTE select_receiver: Starting to select receiver ALFA 2008-Apr-27 21:29:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Apr-27 21:29:10 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Apr-27 21:29:10 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Apr-27 21:29:10 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Apr-27 21:29:10 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Apr-27 21:29:10 LOG5 finish_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Apr-27 21:29:10 INFO2 finish_task: DONE finished selecting: receiver ALFA 2008-Apr-27 21:29:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 21:29:10 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Apr-27 21:29:10 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Apr-27 21:29:10 START begin_task: Starting task 'waiting for receiver ALFA' 2008-Apr-27 21:29:10 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2008-Apr-27 21:29:10 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2008-Apr-27 21:29:10 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2008-Apr-27 21:29:10 INFO1 config_iflo: Configuring rest of the IF/LO path 2008-Apr-27 21:29:10 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2008-Apr-27 21:29:10 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 21:29:10 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-27 21:29:10 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 21:29:10 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2008-Apr-27 21:29:10 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 21:29:10 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 21:29:10 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2008-Apr-27 21:29:10 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 21:29:10 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-27 21:29:10 LOG3 vw_send: To DATATAKING: alfafb 1 2008-Apr-27 21:29:10 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2008-Apr-27 21:29:10 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Apr-27 21:29:10 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Apr-27 21:29:10 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2008-Apr-27 21:29:10 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2008-Apr-27 21:29:10 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2008-Apr-27 21:29:10 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1670405752.0} 2008-Apr-27 21:29:10 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2008-Apr-27 21:29:10 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2008-Apr-27 21:29:10 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Apr-27 21:29:10 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Apr-27 21:29:10 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Apr-27 21:29:10 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Apr-27 21:29:10 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Apr-27 21:29:10 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2008-Apr-27 21:29:10 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2008-Apr-27 21:29:10 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2008-Apr-27 21:29:10 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2008-Apr-27 21:29:10 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Apr-27 21:29:10 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2008-Apr-27 21:29:11 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Apr-27 21:29:11 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Apr-27 21:29:11 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 21:29:11 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Apr-27 21:29:11 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2008-Apr-27 21:29:11 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Apr-27 21:29:11 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2008-Apr-27 21:29:11 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2008-Apr-27 21:29:11 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Apr-27 21:29:11 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 21:29:11 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Apr-27 21:29:11 LOG5 begin_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2008-Apr-27 21:29:11 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Apr-27 21:29:11 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Apr-27 21:29:11 LOG4 got_cormsg: From DATATAKING: alfafb 1 2008-Apr-27 21:29:11 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2008-Apr-27 21:29:11 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2008-Apr-27 21:29:11 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2008-Apr-27 21:29:11 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2008-Apr-27 21:29:11 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1670405752.0} 2008-Apr-27 21:29:11 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2008-Apr-27 21:29:11 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2008-Apr-27 21:29:11 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2008-Apr-27 21:29:11 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2008-Apr-27 21:29:11 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2008-Apr-27 21:29:11 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2008-Apr-27 21:29:11 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Apr-27 21:29:11 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2008-Apr-27 21:29:11 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Apr-27 21:29:11 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 21:29:11 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Apr-27 21:29:11 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2008-Apr-27 21:29:11 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2008-Apr-27 21:29:11 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2008-Apr-27 21:29:11 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 21:29:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 21:29:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 21:29:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 21:29:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 21:29:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 21:29:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 21:29:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 21:29:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 21:29:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 21:29:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 21:29:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 21:29:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 21:29:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 21:29:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 21:29:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 21:29:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 21:29:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 21:29:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 21:29:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 21:29:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 21:29:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 21:29:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 21:29:26 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-27 21:29:26 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Apr-27 21:29:26 LOG5 end_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2008-Apr-27 21:29:26 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Apr-27 21:29:26 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Apr-27 21:29:26 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Apr-27 21:29:26 DONE finish_task: DONE finished configuration: IF/LO path 2008-Apr-27 21:29:26 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-27 21:29:26 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Apr-27 21:29:26 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Apr-27 21:29:26 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Apr-27 21:29:26 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Apr-27 21:29:26 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Apr-27 21:29:26 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Apr-27 21:29:26 START begin_task: Starting task 'selecting calibration port' 2008-Apr-27 21:29:26 LOG5 begin_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-Apr-27 21:29:26 LOG3 vw_send: To DATATAKING: calport 3 2008-Apr-27 21:29:27 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Apr-27 21:29:27 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 21:29:27 START begin_task: Starting task 'waiting on calport' 2008-Apr-27 21:29:27 LOG5 begin_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2008-Apr-27 21:29:27 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 21:29:27 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Apr-27 21:29:27 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 21:29:27 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 21:29:27 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-27 21:29:27 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Apr-27 21:29:27 LOG5 end_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2008-Apr-27 21:29:27 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Apr-27 21:29:27 STOP finish_task: Finishing task 'selecting calibration port' 2008-Apr-27 21:29:27 LOG5 finish_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-Apr-27 21:29:27 INFO2 finish_task: DONE finished configuring: calibration port 2008-Apr-27 21:29:27 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 21:29:27 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Apr-27 21:29:27 LOG5 end_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-Apr-27 21:29:27 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Apr-27 21:29:27 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Apr-27 21:29:27 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Apr-27 21:29:27 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Apr-27 21:29:27 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Apr-27 21:29:27 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Apr-27 21:29:27 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Apr-27 21:29:27 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Apr-27 21:29:27 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 ss 2008-Apr-27 21:29:27 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 ss 2008-Apr-27 21:29:27 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 ss 2008-Apr-27 21:29:27 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 ss 2008-Apr-27 21:29:27 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Apr-27 21:29:27 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Apr-27 21:29:27 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-27 21:29:27 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2008-Apr-27 21:29:27 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-27 21:29:27 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 21:29:27 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-27 21:29:27 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-27 21:29:27 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-27 21:29:27 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2008-Apr-27 21:29:27 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 ss 2008-Apr-27 21:29:27 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 ss 2008-Apr-27 21:29:27 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 ss 2008-Apr-27 21:29:27 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 ss 2008-Apr-27 21:29:27 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Apr-27 21:29:27 LOG5 finish_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Apr-27 21:29:27 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Apr-27 21:29:27 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-27 21:29:27 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Apr-27 21:29:27 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Apr-27 21:29:28 COMMAND run_command_line: EXECUTING command 4: 'SETUP FIXEDDRIFT calwhen=tracking calsecs=5' 2008-Apr-27 21:29:28 COMMAND run_command_line: EXECUTING command 7: 'FIXEDDRIFT az=247.94 alfaangle=-51.5 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_025 ra=95300.00 dec=231700.00' 2008-Apr-27 21:29:28 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-27 21:29:28 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 ss' 2008-Apr-27 21:29:28 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Apr-27 21:29:28 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Apr-27 21:29:28 NOTE WAPPDATA-new_file: New FITS file: wapp.20080427.a2048.0005.fits 2008-Apr-27 21:29:28 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20080427.a2048.0005.fits} 2008-Apr-27 21:29:28 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 ss' 2008-Apr-27 21:29:29 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-27 21:29:29 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 247.94 -51.5 hcorcal 5 tracking no first 1 AGES3193_p2_025 95300.00 231700.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-27 21:29:29 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-27 21:29:29 LOG5 begin_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2008-Apr-27 21:29:29 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES3193_p2_035' 2008-Apr-27 21:29:29 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-27 21:29:29 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p2_025} 2008-Apr-27 21:29:29 INFO3 fixed_driftmap: Sending telescope to Az = 247.94 and ZA = 14.62 2008-Apr-27 21:29:29 LOG3 track_source: Calling 'track_source AGES3193_p2_025 247.94 14.6183432114 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-27 21:29:29 START begin_task: Starting task 'sending tracking commands' 2008-Apr-27 21:29:29 LOG5 begin_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2008-Apr-27 21:29:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_025} INFO {Slewing to source 'AGES3193_p2_025' ...} 2008-Apr-27 21:29:29 INFO1 track_source: Starting to track AGES3193_p2_025 2008-Apr-27 21:29:29 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_025" 2008-Apr-27 21:29:29 LOG3 vw_send: To DATATAKING: set ra 247.94 2008-Apr-27 21:29:29 LOG3 vw_send: To DATATAKING: set dec 14.6183432114 2008-Apr-27 21:29:29 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-27 21:29:29 LOG3 vw_send: To DATATAKING: pnt tr 247.94 14.6183432114 -CF 2008-Apr-27 21:29:29 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 21:29:29 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-27 21:29:29 LOG5 finish_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2008-Apr-27 21:29:29 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-27 21:29:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 21:29:29 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-27 21:29:29 LOG5 end_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2008-Apr-27 21:29:29 START begin_task: Starting task 'rotate ALFA to -51.5 degrees' 2008-Apr-27 21:29:29 LOG5 begin_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2008-Apr-27 21:29:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -51.5 degrees ...} 2008-Apr-27 21:29:29 INFO2 rotate_alfa: ALFA commanded to -51.5 degrees 2008-Apr-27 21:29:29 LOG3 sock_errsend: To ALFAMOTOR: POSITION -51.5 REPLY 2008-Apr-27 21:29:29 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-27 21:29:29 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-27 21:29:29 LOG5 begin_task: Level: (4) ID = <10016> Status = 0 0 0 0 ok 2008-Apr-27 21:29:29 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_025" 2008-Apr-27 21:29:29 LOG4 got_cormsg: From DATATAKING: set ra 247.94 2008-Apr-27 21:29:29 LOG4 got_cormsg: From DATATAKING: set dec 14.6183432114 2008-Apr-27 21:29:29 LOG4 got_cormsg: From DATATAKING: vw% 247.94 2008-Apr-27 21:29:29 LOG4 got_cormsg: From DATATAKING: vw% 14.6183432114 2008-Apr-27 21:29:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 21:29:29 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-27 21:29:29 LOG4 got_cormsg: From DATATAKING: pnt tr 247.94 14.6183432114 -CF 2008-Apr-27 21:29:29 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 21:29:29 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-27 21:29:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 21:29:51 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-27 21:29:51 INFO3 alfa_motor: ALFA rotator in-position -51.50 degrees 2008-Apr-27 21:29:51 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-27 21:29:51 LOG5 end_task: Level: (4) ID = <10016> Status = 0 0 0 0 ok 2008-Apr-27 21:29:51 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-27 21:29:51 STOP finish_task: Finishing task 'rotate ALFA to -51.5 degrees' 2008-Apr-27 21:29:51 LOG5 finish_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2008-Apr-27 21:29:51 INFO2 finish_task: DONE finished configuration: rotating ALFA to -51.5 degrees 2008-Apr-27 21:29:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 21:29:51 STOP end_task: Finishing task 'rotate ALFA to -51.5 degrees' with status 'OK' 2008-Apr-27 21:29:51 LOG5 end_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2008-Apr-27 21:29:51 START begin_task: Starting task 'waiting on telescope' 2008-Apr-27 21:29:51 LOG5 begin_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2008-Apr-27 21:29:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-27 21:29:51 LOG3 waittrk: Start waittrk 5 2008-Apr-27 21:29:51 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-27 21:29:51 LOG5 begin_task: Level: (4) ID = <10018> Status = 0 0 0 0 ok 2008-Apr-27 21:29:56 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-27 21:29:56 LOG5 end_task: Level: (4) ID = <10018> Status = 0 0 0 0 ok 2008-Apr-27 21:29:56 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-27 21:29:56 LOG5 begin_task: Level: (4) ID = <10019> Status = 0 0 0 0 ok 2008-Apr-27 21:29:58 COMMAND CIMA-send_to_exec: Sending command to stop observation 2008-Apr-27 21:29:58 LOG4 exec_msg: From OBSERVER: stop_task 2008-Apr-27 21:29:58 WARNING stop_task: WARNING stop at end of current loop/command requested! 2008-Apr-27 21:30:05 COMMAND CIMA-send_to_exec: Sending command to abort observation 2008-Apr-27 21:30:05 LOG4 exec_msg: From OBSERVER: abort_task abort 2008-Apr-27 21:30:05 WARNING abort_task: WARNING abort requested! 2008-Apr-27 21:30:05 WARNING abort_task: WARNING Aborting wait for waiting on telescope on source 2008-Apr-27 21:30:05 STOP end_task: Finishing task 'waiting on telescope on source' with status 'ABORT' 2008-Apr-27 21:30:05 LOG5 end_task: Level: (4) ID = <10019> Status = 1 0 1 0 abort 2008-Apr-27 21:30:05 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-27 21:30:05 LOG4 waittrk: Current telescope position: Az = 160.23 ZA = 7.00 2008-Apr-27 21:30:05 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-27 21:30:05 LOG5 finish_task: Level: (3) ID = <10017> Status = 1 0 1 0 abort 2008-Apr-27 21:30:05 WARNING finish_task: WARNING aborted waiting: telescope on source 2008-Apr-27 21:30:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Aborted 2008-Apr-27 21:30:05 STOP end_task: Finishing task 'waiting on telescope' with status 'ABORT' 2008-Apr-27 21:30:05 LOG5 end_task: Level: (3) ID = <10017> Status = 1 0 1 0 abort 2008-Apr-27 21:30:05 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-27 21:30:05 LOG5 finish_task: Level: (2) ID = <10013> Status = 1 0 1 0 abort 2008-Apr-27 21:30:05 WARNING finish_task: WARNING aborted pattern: fixed azimuth drift map 2008-Apr-27 21:30:05 LOG4 send_obs_status: To obs_status: <1> ENDTASK Aborted 2008-Apr-27 21:30:05 END end_task: Finishing task 'fixed azimuth drift map' with status 'ABORT' 2008-Apr-27 21:30:05 LOG5 end_task: Level: (2) ID = <10013> Status = 1 0 1 0 abort 2008-Apr-27 21:30:05 ALERT run_command_file: Stopping command file processing at line 7! 2008-Apr-27 21:30:05 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2008-Apr-27 21:30:05 STOP finish_task: Finishing task 'running command file '080427_obs.cmd'' 2008-Apr-27 21:30:05 LOG5 finish_task: Level: (1) ID = <10003> Status = 1 0 1 0 abort 2008-Apr-27 21:30:05 WARNING finish_task: WARNING aborted running: command file '080427_obs.cmd' 2008-Apr-27 21:30:05 LOG4 send_obs_status: To obs_status: <1> ENDTASK Aborted 2008-Apr-27 21:30:05 END end_task: Finishing task 'running command file '080427_obs.cmd'' with status 'ABORT' 2008-Apr-27 21:30:05 LOG5 end_task: Level: (1) ID = <10003> Status = 1 0 1 0 abort 2008-Apr-27 21:30:43 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-Apr-27 21:30:43 LOG4 exec_msg: From OBSERVER: run_command_file 080427_obs.cmd 29 1 14 2008-Apr-27 21:30:43 LOG4 run_command_file: Calling 'run_command_file 080427_obs.cmd 29 1 14' 2008-Apr-27 21:30:43 BEGIN begin_task: Starting task 'running command file '080427_obs.cmd'' 2008-Apr-27 21:30:43 LOG5 begin_task: Level: (1) ID = <10020> Status = 0 0 0 0 ok 2008-Apr-27 21:30:43 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '080427_obs.cmd' ...} 2008-Apr-27 21:30:43 NOTE run_command_file: Starting execution of command file '080427_obs.cmd' from line 29 2008-Apr-27 21:30:43 COMMAND run_command_line: EXECUTING command 31: 'FIXEDDRIFT az=313.92 alfaangle=58.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_079 ra=120900.00 dec=70300.00' 2008-Apr-27 21:30:43 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-27 21:30:44 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-27 21:30:44 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 313.92 58.3 hcorcal 5 tracking no first 1 AGESVC1A_p2_079 120900.00 70300.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-27 21:30:44 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-27 21:30:44 LOG5 begin_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2008-Apr-27 21:30:44 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES3193_p2_025' 2008-Apr-27 21:30:44 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-27 21:30:44 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1A_p2_079} 2008-Apr-27 21:30:44 INFO3 fixed_driftmap: Sending telescope to Az = 313.92 and ZA = 15.95 2008-Apr-27 21:30:44 LOG3 track_source: Calling 'track_source AGESVC1A_p2_079 313.92 15.9461560361 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-27 21:30:44 START begin_task: Starting task 'sending tracking commands' 2008-Apr-27 21:30:44 LOG5 begin_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2008-Apr-27 21:30:44 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_079} INFO {Slewing to source 'AGESVC1A_p2_079' ...} 2008-Apr-27 21:30:44 INFO1 track_source: Starting to track AGESVC1A_p2_079 2008-Apr-27 21:30:44 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_079" 2008-Apr-27 21:30:44 LOG3 vw_send: To DATATAKING: set ra 313.92 2008-Apr-27 21:30:44 LOG3 vw_send: To DATATAKING: set dec 15.9461560361 2008-Apr-27 21:30:44 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-27 21:30:44 LOG3 vw_send: To DATATAKING: pnt tr 313.92 15.9461560361 -CF 2008-Apr-27 21:30:44 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 21:30:44 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-27 21:30:44 LOG5 finish_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2008-Apr-27 21:30:44 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-27 21:30:44 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 21:30:44 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-27 21:30:44 LOG5 end_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2008-Apr-27 21:30:44 START begin_task: Starting task 'rotate ALFA to +58.3 degrees' 2008-Apr-27 21:30:44 LOG5 begin_task: Level: (3) ID = <10023> Status = 0 0 0 0 ok 2008-Apr-27 21:30:44 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +58.3 degrees ...} 2008-Apr-27 21:30:44 INFO2 rotate_alfa: ALFA commanded to +58.3 degrees 2008-Apr-27 21:30:44 LOG3 sock_errsend: To ALFAMOTOR: POSITION 58.3 REPLY 2008-Apr-27 21:30:44 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-27 21:30:44 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-27 21:30:44 LOG5 begin_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2008-Apr-27 21:30:44 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_079" 2008-Apr-27 21:30:44 LOG4 got_cormsg: From DATATAKING: set ra 313.92 2008-Apr-27 21:30:44 LOG4 got_cormsg: From DATATAKING: set dec 15.9461560361 2008-Apr-27 21:30:44 LOG4 got_cormsg: From DATATAKING: vw% 313.92 2008-Apr-27 21:30:44 LOG4 got_cormsg: From DATATAKING: vw% 15.9461560361 2008-Apr-27 21:30:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 21:30:44 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-27 21:30:44 LOG4 got_cormsg: From DATATAKING: pnt tr 313.92 15.9461560361 -CF 2008-Apr-27 21:30:44 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 21:30:44 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-27 21:30:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 21:31:46 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-27 21:31:46 INFO3 alfa_motor: ALFA rotator in-position +58.30 degrees 2008-Apr-27 21:31:46 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-27 21:31:46 LOG5 end_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2008-Apr-27 21:31:46 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-27 21:31:46 STOP finish_task: Finishing task 'rotate ALFA to +58.3 degrees' 2008-Apr-27 21:31:46 LOG5 finish_task: Level: (3) ID = <10023> Status = 0 0 0 0 ok 2008-Apr-27 21:31:46 INFO2 finish_task: DONE finished configuration: rotating ALFA to +58.3 degrees 2008-Apr-27 21:31:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 21:31:46 STOP end_task: Finishing task 'rotate ALFA to +58.3 degrees' with status 'OK' 2008-Apr-27 21:31:46 LOG5 end_task: Level: (3) ID = <10023> Status = 0 0 0 0 ok 2008-Apr-27 21:31:46 START begin_task: Starting task 'waiting on telescope' 2008-Apr-27 21:31:46 LOG5 begin_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2008-Apr-27 21:31:46 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-27 21:31:46 LOG3 waittrk: Start waittrk 5 2008-Apr-27 21:31:46 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-27 21:31:46 LOG5 begin_task: Level: (4) ID = <10026> Status = 0 0 0 0 ok 2008-Apr-27 21:31:51 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-27 21:31:51 LOG5 end_task: Level: (4) ID = <10026> Status = 0 0 0 0 ok 2008-Apr-27 21:31:51 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-27 21:31:51 LOG5 begin_task: Level: (4) ID = <10027> Status = 0 0 0 0 ok 2008-Apr-27 21:33:38 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 21:33:38.298 (seconds: 77618.298)!} 2008-Apr-27 21:33:38 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 21:33:38.298 (seconds: 77618.298)! 2008-Apr-27 21:36:27 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-27 21:36:27 LOG5 end_task: Level: (4) ID = <10027> Status = 0 0 0 0 ok 2008-Apr-27 21:36:27 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-27 21:36:27 INFO2 waittrk: Now tracking AGESVC1A_p2_079 2008-Apr-27 21:36:27 LOG4 waittrk: Current telescope position: Az = 313.54 ZA = 15.94 2008-Apr-27 21:36:27 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-27 21:36:27 LOG5 finish_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2008-Apr-27 21:36:27 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-27 21:36:27 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 21:36:27 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-27 21:36:27 LOG5 end_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2008-Apr-27 21:36:27 START begin_task: Starting task 'selecting calibration type' 2008-Apr-27 21:36:27 LOG5 begin_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2008-Apr-27 21:36:27 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-27 21:36:27 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-27 21:36:27 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 21:36:27 START begin_task: Starting task 'waiting on setcal' 2008-Apr-27 21:36:27 LOG5 begin_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2008-Apr-27 21:36:27 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-27 21:36:27 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 21:36:27 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 21:36:27 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-27 21:36:27 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-27 21:36:27 LOG5 end_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2008-Apr-27 21:36:27 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-27 21:36:27 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 21:36:27 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-27 21:36:27 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 21:36:27 LOG5 begin_task: Level: (4) ID = <10030> Status = 0 0 0 0 ok 2008-Apr-27 21:36:27 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 21:36:27 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 21:36:27 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 21:36:27 LOG5 end_task: Level: (4) ID = <10030> Status = 0 0 0 0 ok 2008-Apr-27 21:36:27 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 21:36:27 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-27 21:36:27 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 21:36:27 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-27 21:36:27 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 21:36:27 LOG5 begin_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2008-Apr-27 21:36:27 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 21:36:27 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 21:36:27 LOG5 end_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2008-Apr-27 21:36:28 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 21:36:28 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-27 21:36:28 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-27 21:36:28 LOG5 finish_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2008-Apr-27 21:36:28 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-27 21:36:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 21:36:28 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-27 21:36:28 LOG5 end_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2008-Apr-27 21:36:28 LOG5 dopset_later: Calling 'dopset_later 0' 2008-Apr-27 21:36:28 INFO3 dopset_later: Setting Doppler correction now 2008-Apr-27 21:36:28 LOG5 antvel: Calling 'antvel 313.920000 15.946156 F 0' 2008-Apr-27 21:36:28 LOG2 antvel: Parameters to Doppler: Heliocentric 92187 2008 118 0.0 2008-Apr-27 21:36:28 INFO5 antvel: Computed antenna velocity: +16.78570 km/s 2008-Apr-27 21:36:28 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=16.785703574399999 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-27 21:36:28 INFO4 dopset_gen: New sky frequencies: 1381.166096 1381.166096 1381.166096 1381.166096 1381.166096 1381.166096 1381.166096 1381.166096 1381.166096 2008-Apr-27 21:36:28 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.166096 sky0=1381.166096 sky1=1381.166096 sky2=1381.166096 sky3=1381.166096 sky4=1381.166096 sky5=1381.166096 sky6=1381.166096 sky7=1381.166096 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-27 21:36:28 LOG2 dopset_gen: Result from 'sky2syn': 1631.166096 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-27 21:36:28 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631166096.0} 2008-Apr-27 21:36:28 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 21:36:28 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-27 21:36:28 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-27 21:36:28 INFO5 fixed_driftmap: Tracking J2000 position: RA = 12:20:40.0 Dec = +07:02:50.8 2008-Apr-27 21:36:28 LOG3 track_source: Calling 'track_source AGESVC1A_p2_079 122040.0 070250.8 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-27 21:36:28 START begin_task: Starting task 'sending tracking commands' 2008-Apr-27 21:36:28 LOG5 begin_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2008-Apr-27 21:36:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_079} INFO {Slewing to source 'AGESVC1A_p2_079' ...} 2008-Apr-27 21:36:28 INFO1 track_source: Starting to track AGESVC1A_p2_079 2008-Apr-27 21:36:28 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_079" 2008-Apr-27 21:36:28 LOG3 vw_send: To DATATAKING: set ra 122040.0 2008-Apr-27 21:36:28 LOG3 vw_send: To DATATAKING: set dec 070250.8 2008-Apr-27 21:36:28 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-27 21:36:28 LOG3 vw_send: To DATATAKING: pnt tr 122040.0 070250.8 -CJ 2008-Apr-27 21:36:28 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 21:36:28 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-27 21:36:28 LOG5 finish_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2008-Apr-27 21:36:28 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-27 21:36:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 21:36:28 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-27 21:36:28 LOG5 end_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2008-Apr-27 21:36:28 START begin_task: Starting task 'waiting on telescope' 2008-Apr-27 21:36:28 LOG5 begin_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2008-Apr-27 21:36:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-27 21:36:28 LOG3 waittrk: Start waittrk 5 2008-Apr-27 21:36:28 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-27 21:36:28 LOG5 begin_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2008-Apr-27 21:36:28 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631166096.0} 2008-Apr-27 21:36:28 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 21:36:28 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_079" 2008-Apr-27 21:36:28 LOG4 got_cormsg: From DATATAKING: set ra 122040.0 2008-Apr-27 21:36:28 LOG4 got_cormsg: From DATATAKING: set dec 070250.8 2008-Apr-27 21:36:28 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 122040.0 2008-Apr-27 21:36:28 LOG4 got_cormsg: From DATATAKING: vw% 070250.8 2008-Apr-27 21:36:28 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 21:36:28 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-27 21:36:28 LOG4 got_cormsg: From DATATAKING: pnt tr 122040.0 070250.8 -CJ 2008-Apr-27 21:36:28 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 21:36:28 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-27 21:36:28 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 21:36:33 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-27 21:36:33 LOG5 end_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2008-Apr-27 21:36:33 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-27 21:36:33 LOG5 begin_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2008-Apr-27 21:36:35 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-27 21:36:35 LOG5 end_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2008-Apr-27 21:36:35 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-27 21:36:35 INFO2 waittrk: Now tracking AGESVC1A_p2_079 2008-Apr-27 21:36:35 LOG4 waittrk: Current telescope position: Az = 313.60 ZA = 15.93 2008-Apr-27 21:36:35 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-27 21:36:35 LOG5 finish_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2008-Apr-27 21:36:35 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-27 21:36:35 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 21:36:35 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-27 21:36:35 LOG5 end_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2008-Apr-27 21:36:35 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-27 21:36:35 LOG5 begin_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2008-Apr-27 21:36:35 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-27 21:36:35 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-27 21:36:35 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-27 21:36:35 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-27 21:36:35 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 21:36:35 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-27 21:36:35 LOG5 begin_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2008-Apr-27 21:36:35 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-27 21:36:35 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 21:36:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 21:36:39 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-27 21:36:39 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-27 21:36:39 LOG5 end_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2008-Apr-27 21:36:39 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-27 21:36:39 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-27 21:36:39 LOG5 begin_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2008-Apr-27 21:36:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-27 21:36:39 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-27 21:36:39 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-27 21:36:39 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-27 21:36:39 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-27 21:36:39 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-27 21:36:39 LOG5 begin_task: Level: (5) ID = <10039> Status = 0 0 0 0 ok 2008-Apr-27 21:36:39 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-27 21:36:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 21:36:39 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 9 dB --- beam 1: 8 6 dB 2008-Apr-27 21:36:39 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 6 dB 2008-Apr-27 21:36:39 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-27 21:36:39 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 3 3 dB 2008-Apr-27 21:36:39 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-27 21:36:39 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-27 21:36:39 LOG5 end_task: Level: (5) ID = <10039> Status = 0 0 0 0 ok 2008-Apr-27 21:36:39 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.892 1.068 ALFA beam 1: 0.892 1.107 2008-Apr-27 21:36:39 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.090 0.996 ALFA beam 3: 1.046 1.068 2008-Apr-27 21:36:39 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.975 1.013 ALFA beam 5: 1.073 0.974 2008-Apr-27 21:36:39 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.998 1.022 ALFA beam 7: 0.878 0.917 2008-Apr-27 21:36:39 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-27 21:36:39 LOG5 finish_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2008-Apr-27 21:36:39 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-27 21:36:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 21:36:39 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-27 21:36:39 LOG5 end_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2008-Apr-27 21:36:39 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-27 21:36:40 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-27 21:36:40 LOG5 finish_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2008-Apr-27 21:36:40 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-27 21:36:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 21:36:40 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-27 21:36:40 LOG5 end_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2008-Apr-27 21:36:40 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 ss 2008-Apr-27 21:36:40 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 ss 2008-Apr-27 21:36:40 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 ss 2008-Apr-27 21:36:40 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 ss 2008-Apr-27 21:36:40 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20080427.a2048.0005.fits' is empty! 2008-Apr-27 21:36:40 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-27 21:36:40 START begin_task: Starting task 'WAPP calibration' 2008-Apr-27 21:36:40 LOG5 begin_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2008-Apr-27 21:36:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-27 21:36:40 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-27 21:36:40 START begin_task: Starting task 'selecting calibration type' 2008-Apr-27 21:36:40 LOG5 begin_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2008-Apr-27 21:36:40 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-27 21:36:40 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-27 21:36:40 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 21:36:40 START begin_task: Starting task 'waiting on setcal' 2008-Apr-27 21:36:40 LOG5 begin_task: Level: (5) ID = <10042> Status = 0 0 0 0 ok 2008-Apr-27 21:36:40 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 ss' 2008-Apr-27 21:36:40 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-27 21:36:40 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 21:36:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 21:36:40 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-27 21:36:40 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-27 21:36:40 LOG5 end_task: Level: (5) ID = <10042> Status = 0 0 0 0 ok 2008-Apr-27 21:36:40 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-27 21:36:40 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 21:36:40 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-27 21:36:40 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 21:36:40 LOG5 begin_task: Level: (5) ID = <10043> Status = 0 0 0 0 ok 2008-Apr-27 21:36:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 21:36:40 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 21:36:40 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 21:36:40 LOG5 end_task: Level: (5) ID = <10043> Status = 0 0 0 0 ok 2008-Apr-27 21:36:40 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 21:36:40 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-27 21:36:40 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 21:36:40 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-27 21:36:40 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 21:36:40 LOG5 begin_task: Level: (5) ID = <10044> Status = 0 0 0 0 ok 2008-Apr-27 21:36:40 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 21:36:40 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 21:36:40 LOG5 end_task: Level: (5) ID = <10044> Status = 0 0 0 0 ok 2008-Apr-27 21:36:40 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 21:36:40 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-27 21:36:40 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-27 21:36:40 LOG5 finish_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2008-Apr-27 21:36:40 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-27 21:36:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 21:36:40 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-27 21:36:40 LOG5 end_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2008-Apr-27 21:36:40 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-27 21:36:40 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-27 21:36:40 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-27 21:36:40 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-27 21:36:40 LOG5 begin_task: Level: (4) ID = <10045> Status = 0 0 0 0 ok 2008-Apr-27 21:36:40 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-27 21:36:40 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-27 21:36:40 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-27 21:36:40 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-27 21:36:40 LOG5 end_task: Level: (4) ID = <10045> Status = 0 0 0 0 ok 2008-Apr-27 21:36:40 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-27 21:36:41 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-27 21:36:41 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-27 21:36:41 LOG5 begin_task: Level: (4) ID = <10046> Status = 0 0 0 0 ok 2008-Apr-27 21:36:41 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-27 21:36:41 LOG5 log_alfabeam: Parameters: 12.344444444444445 7.0474444444444453 11.587606 2008.3255317261135 58.299942 2008-Apr-27 21:36:41 LOG4 log_alfabeam: ALFABEAM 0 12.344444444444441 7.047444444444450 2008-Apr-27 21:36:41 LOG4 log_alfabeam: ALFABEAM 1 12.342205913064216 7.145309338206762 2008-Apr-27 21:36:41 LOG4 log_alfabeam: ALFABEAM 2 12.337919599912906 7.080555257917147 2008-Apr-27 21:36:41 LOG4 log_alfabeam: ALFABEAM 3 12.340121518687026 6.982504337530013 2008-Apr-27 21:36:41 LOG4 log_alfabeam: ALFABEAM 4 12.346652427397114 6.949318180283937 2008-Apr-27 21:36:41 LOG4 log_alfabeam: ALFABEAM 5 12.350987869038521 7.014782540059406 2008-Apr-27 21:36:41 LOG4 log_alfabeam: ALFABEAM 6 12.348743262927206 7.112722333675055 2008-Apr-27 21:36:41 INFO2 take_spectra: Starting WAPP scan: 811800101 2008-Apr-27 21:36:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-27 21:36:41 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-27 21:36:41 LOG5 begin_task: Level: (5) ID = <10047> Status = 0 0 0 0 ok 2008-Apr-27 21:36:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 21:36:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 5802.00 2008-Apr-27 21:36:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.166096 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 21:36:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.166096 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 21:36:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.166096 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 21:36:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.166096 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-27 21:36:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.166096 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 21:36:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.166096 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-27 21:36:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.166096 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-27 21:36:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.166096 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-27 21:36:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.166096 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-27 21:36:47 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 21:36:47 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-27 21:36:47 LOG5 end_task: Level: (5) ID = <10047> Status = 0 0 0 0 ok 2008-Apr-27 21:36:47 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-27 21:36:47 LOG5 end_task: Level: (4) ID = <10046> Status = 0 0 0 0 ok 2008-Apr-27 21:36:47 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-27 21:36:47 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-27 21:36:47 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-27 21:36:47 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-27 21:36:47 LOG5 begin_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2008-Apr-27 21:36:47 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-27 21:36:47 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-27 21:36:47 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-27 21:36:47 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-27 21:36:47 LOG5 end_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2008-Apr-27 21:36:47 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-27 21:36:47 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-27 21:36:47 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-27 21:36:47 LOG5 begin_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2008-Apr-27 21:36:47 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-27 21:36:47 LOG5 log_alfabeam: Parameters: 12.344444444444445 7.0474444444444453 11.589555 2008.3255319479301 58.299942 2008-Apr-27 21:36:47 LOG4 log_alfabeam: ALFABEAM 0 12.344444444444443 7.047444444444442 2008-Apr-27 21:36:47 LOG4 log_alfabeam: ALFABEAM 1 12.342213975846382 7.145350046236905 2008-Apr-27 21:36:47 LOG4 log_alfabeam: ALFABEAM 2 12.337922350544567 7.080674912532842 2008-Apr-27 21:36:47 LOG4 log_alfabeam: ALFABEAM 3 12.340116144700835 6.982583703669302 2008-Apr-27 21:36:47 LOG4 log_alfabeam: ALFABEAM 4 12.346644307149083 6.949277689871213 2008-Apr-27 21:36:47 LOG4 log_alfabeam: ALFABEAM 5 12.350985179973524 7.014663164694880 2008-Apr-27 21:36:47 LOG4 log_alfabeam: ALFABEAM 6 12.348748632183094 7.112643866862340 2008-Apr-27 21:36:47 INFO2 take_spectra: Starting WAPP scan: 811800102 2008-Apr-27 21:36:48 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-27 21:36:48 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-27 21:36:48 LOG5 begin_task: Level: (5) ID = <10050> Status = 0 0 0 0 ok 2008-Apr-27 21:36:48 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 21:36:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.480 > 1.4)! 2008-Apr-27 21:36:48 LOG4 check_wapp_levels: WAPP-1 power levels: 0.892 1.068 0.892 1.107 2008-Apr-27 21:36:48 LOG4 check_wapp_levels: WAPP-2 power levels: 1.464 1.355 1.422 1.480 2008-Apr-27 21:36:48 LOG4 check_wapp_levels: WAPP-3 power levels: 1.357 1.418 1.473 1.279 2008-Apr-27 21:36:48 LOG4 check_wapp_levels: WAPP-4 power levels: 0.998 1.022 0.878 0.917 2008-Apr-27 21:36:48 INFO1 WAPP=1+2+3+4-start_spectra: start sec 5809.00 2008-Apr-27 21:36:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.166096 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 21:36:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.166096 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 21:36:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.166096 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 21:36:54 INFO5 check_wapp_levels: WAPP power levels are between 0.887 and 1.480 (still bad) 2008-Apr-27 21:36:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.166096 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-27 21:36:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.166096 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 21:36:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.166096 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-27 21:36:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.166096 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-27 21:36:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.166096 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-27 21:36:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.166096 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-27 21:36:54 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-27 21:36:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 21:36:54 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-27 21:36:54 LOG5 end_task: Level: (5) ID = <10050> Status = 0 0 0 0 ok 2008-Apr-27 21:36:54 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-27 21:36:54 LOG5 end_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2008-Apr-27 21:36:54 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-27 21:36:54 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-27 21:36:54 LOG5 finish_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2008-Apr-27 21:36:54 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-27 21:36:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 21:36:54 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-27 21:36:54 LOG5 end_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2008-Apr-27 21:36:54 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-27 21:36:54 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 313.92 and ZA = 15.95 2008-Apr-27 21:36:54 LOG3 track_source: Calling 'track_source AGESVC1A_p2_079 313.92 15.9461560361 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-27 21:36:54 START begin_task: Starting task 'sending tracking commands' 2008-Apr-27 21:36:54 LOG5 begin_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2008-Apr-27 21:36:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_079} INFO {Slewing to source 'AGESVC1A_p2_079' ...} 2008-Apr-27 21:36:54 INFO1 track_source: Starting to track AGESVC1A_p2_079 2008-Apr-27 21:36:54 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_079" 2008-Apr-27 21:36:54 LOG3 vw_send: To DATATAKING: set ra 313.92 2008-Apr-27 21:36:54 LOG3 vw_send: To DATATAKING: set dec 15.9461560361 2008-Apr-27 21:36:54 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-27 21:36:54 LOG3 vw_send: To DATATAKING: pnt tr 313.92 15.9461560361 -CF 2008-Apr-27 21:36:54 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 21:36:54 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-27 21:36:54 LOG5 finish_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2008-Apr-27 21:36:54 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-27 21:36:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 21:36:55 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-27 21:36:55 LOG5 end_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2008-Apr-27 21:36:55 LOG1 fixed_driftmap: Parameters: HA = -00:46:00.2 Start = 11:23:27.0 LST = 11:35:29.4 diff = -722.4 secs 2008-Apr-27 21:36:55 WARNING fixed_driftmap: WARNING RA has already passed --- starting anyway! 2008-Apr-27 21:36:55 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-27 21:36:55 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-27 21:36:55 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-27 21:36:55 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-27 21:36:55 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-27 21:36:55 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-27 21:36:55 LOG5 begin_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2008-Apr-27 21:36:55 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-27 21:36:55 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-27 21:36:55 INFO2 take_spectra: Starting WAPP scan: 811800103 2008-Apr-27 21:36:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-27 21:36:55 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-27 21:36:55 LOG5 begin_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2008-Apr-27 21:36:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 21:36:55 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_079" 2008-Apr-27 21:36:55 LOG4 got_cormsg: From DATATAKING: set ra 313.92 2008-Apr-27 21:36:55 LOG4 got_cormsg: From DATATAKING: set dec 15.9461560361 2008-Apr-27 21:36:55 LOG4 got_cormsg: From DATATAKING: vw% 313.92 2008-Apr-27 21:36:55 LOG4 got_cormsg: From DATATAKING: vw% 15.9461560361 2008-Apr-27 21:36:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 21:36:55 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-27 21:36:55 LOG4 got_cormsg: From DATATAKING: pnt tr 313.92 15.9461560361 -CF 2008-Apr-27 21:36:55 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 21:36:55 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-27 21:36:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 21:36:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 5816.00 2008-Apr-27 21:36:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.166096 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 21:36:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.166096 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 21:36:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.166096 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 21:36:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.166096 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-27 21:36:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.166096 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 21:36:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.166096 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-27 21:36:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.166096 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-27 21:36:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.166096 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-27 21:36:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.166096 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-27 21:36:59 WARNING WAPP=1+2+3+4-start_spectra: WARNING observing when not on source 2008-Apr-27 21:37:00 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.887 and 1.107 2008-Apr-27 21:37:06 NOTE WAPP=1+2+3+4-start_spectra: Observing now on source 2008-Apr-27 21:48:37 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 21:48:37.299 (seconds: 78517.299)!} 2008-Apr-27 21:48:37 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 21:48:37.299 (seconds: 78517.299)! 2008-Apr-27 21:48:38 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 78516.0 to 78517.0! 2008-Apr-27 21:48:39 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (78516.0 - 78518.0)! 2008-Apr-27 21:56:56 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 21:56:56 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-27 21:56:56 LOG5 end_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2008-Apr-27 21:56:56 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-27 21:56:56 LOG5 end_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2008-Apr-27 21:56:56 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-27 21:56:56 LOG5 finish_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2008-Apr-27 21:56:56 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-27 21:56:56 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-27 21:56:56 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-27 21:56:56 LOG5 end_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2008-Apr-27 21:56:56 COMMAND run_command_line: EXECUTING command 35: 'FIXEDDRIFT az=333.11 alfaangle=41.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_081 ra=120900.00 dec=70000.00' 2008-Apr-27 21:56:56 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-27 21:56:56 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-27 21:56:56 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 333.11 41.4 hcorcal 5 tracking no first 1 AGESVC1A_p2_081 120900.00 70000.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-27 21:56:56 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-27 21:56:57 LOG5 begin_task: Level: (2) ID = <10054> Status = 0 0 0 0 ok 2008-Apr-27 21:56:57 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGESVC1A_p2_079' 2008-Apr-27 21:56:57 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-27 21:56:57 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1A_p2_081} 2008-Apr-27 21:56:57 INFO3 fixed_driftmap: Sending telescope to Az = 333.11 and ZA = 12.70 2008-Apr-27 21:56:57 LOG3 track_source: Calling 'track_source AGESVC1A_p2_081 333.11 12.7034303716 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-27 21:56:57 START begin_task: Starting task 'sending tracking commands' 2008-Apr-27 21:56:57 LOG5 begin_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2008-Apr-27 21:56:57 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_081} INFO {Slewing to source 'AGESVC1A_p2_081' ...} 2008-Apr-27 21:56:57 INFO1 track_source: Starting to track AGESVC1A_p2_081 2008-Apr-27 21:56:57 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_081" 2008-Apr-27 21:56:57 LOG3 vw_send: To DATATAKING: set ra 333.11 2008-Apr-27 21:56:57 LOG3 vw_send: To DATATAKING: set dec 12.7034303716 2008-Apr-27 21:56:57 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-27 21:56:57 LOG3 vw_send: To DATATAKING: pnt tr 333.11 12.7034303716 -CF 2008-Apr-27 21:56:57 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 21:56:57 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-27 21:56:57 LOG5 finish_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2008-Apr-27 21:56:57 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-27 21:56:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 21:56:57 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-27 21:56:57 LOG5 end_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2008-Apr-27 21:56:57 START begin_task: Starting task 'rotate ALFA to +41.4 degrees' 2008-Apr-27 21:56:57 LOG5 begin_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2008-Apr-27 21:56:57 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +41.4 degrees ...} 2008-Apr-27 21:56:57 INFO2 rotate_alfa: ALFA commanded to +41.4 degrees 2008-Apr-27 21:56:57 LOG3 sock_errsend: To ALFAMOTOR: POSITION 41.4 REPLY 2008-Apr-27 21:56:57 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-27 21:56:57 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-27 21:56:57 LOG5 begin_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2008-Apr-27 21:56:57 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_081" 2008-Apr-27 21:56:57 LOG4 got_cormsg: From DATATAKING: set ra 333.11 2008-Apr-27 21:56:57 LOG4 got_cormsg: From DATATAKING: set dec 12.7034303716 2008-Apr-27 21:56:57 LOG4 got_cormsg: From DATATAKING: vw% 333.11 2008-Apr-27 21:56:57 LOG4 got_cormsg: From DATATAKING: vw% 12.7034303716 2008-Apr-27 21:56:57 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 21:56:57 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-27 21:56:57 LOG4 got_cormsg: From DATATAKING: pnt tr 333.11 12.7034303716 -CF 2008-Apr-27 21:56:57 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 21:56:57 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-27 21:56:57 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 21:57:08 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-27 21:57:08 INFO3 alfa_motor: ALFA rotator in-position +41.40 degrees 2008-Apr-27 21:57:08 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-27 21:57:08 LOG5 end_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2008-Apr-27 21:57:08 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-27 21:57:08 STOP finish_task: Finishing task 'rotate ALFA to +41.4 degrees' 2008-Apr-27 21:57:08 LOG5 finish_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2008-Apr-27 21:57:08 INFO2 finish_task: DONE finished configuration: rotating ALFA to +41.4 degrees 2008-Apr-27 21:57:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 21:57:08 STOP end_task: Finishing task 'rotate ALFA to +41.4 degrees' with status 'OK' 2008-Apr-27 21:57:08 LOG5 end_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2008-Apr-27 21:57:08 START begin_task: Starting task 'waiting on telescope' 2008-Apr-27 21:57:08 LOG5 begin_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2008-Apr-27 21:57:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-27 21:57:08 LOG3 waittrk: Start waittrk 5 2008-Apr-27 21:57:08 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-27 21:57:08 LOG5 begin_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2008-Apr-27 21:57:13 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-27 21:57:13 LOG5 end_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2008-Apr-27 21:57:13 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-27 21:57:13 LOG5 begin_task: Level: (4) ID = <10060> Status = 0 0 0 0 ok 2008-Apr-27 21:58:25 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-27 21:58:25 LOG5 end_task: Level: (4) ID = <10060> Status = 0 0 0 0 ok 2008-Apr-27 21:58:25 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-27 21:58:25 INFO2 waittrk: Now tracking AGESVC1A_p2_081 2008-Apr-27 21:58:25 LOG4 waittrk: Current telescope position: Az = 332.72 ZA = 12.68 2008-Apr-27 21:58:25 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-27 21:58:25 LOG5 finish_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2008-Apr-27 21:58:25 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-27 21:58:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 21:58:25 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-27 21:58:25 LOG5 end_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2008-Apr-27 21:58:25 START begin_task: Starting task 'selecting calibration type' 2008-Apr-27 21:58:25 LOG5 begin_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2008-Apr-27 21:58:25 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-27 21:58:25 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-27 21:58:25 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 21:58:25 START begin_task: Starting task 'waiting on setcal' 2008-Apr-27 21:58:25 LOG5 begin_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2008-Apr-27 21:58:25 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-27 21:58:25 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 21:58:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 21:58:27 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-27 21:58:27 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-27 21:58:27 LOG5 end_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2008-Apr-27 21:58:27 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-27 21:58:27 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 21:58:27 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-27 21:58:27 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 21:58:27 LOG5 begin_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2008-Apr-27 21:58:27 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 21:58:27 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 21:58:27 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 21:58:27 LOG5 end_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2008-Apr-27 21:58:27 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 21:58:27 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-27 21:58:27 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 21:58:27 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-27 21:58:27 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 21:58:27 LOG5 begin_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2008-Apr-27 21:58:27 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 21:58:27 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 21:58:27 LOG5 end_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2008-Apr-27 21:58:27 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 21:58:27 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-27 21:58:27 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-27 21:58:27 LOG5 finish_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2008-Apr-27 21:58:27 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-27 21:58:27 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 21:58:27 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-27 21:58:27 LOG5 end_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2008-Apr-27 21:58:27 LOG5 dopset_later: Calling 'dopset_later 0' 2008-Apr-27 21:58:27 INFO3 dopset_later: Setting Doppler correction now 2008-Apr-27 21:58:27 LOG5 antvel: Calling 'antvel 333.110000 12.703430 F 0' 2008-Apr-27 21:58:27 LOG2 antvel: Parameters to Doppler: Heliocentric 93506 2008 118 0.0 2008-Apr-27 21:58:27 INFO5 antvel: Computed antenna velocity: +16.92482 km/s 2008-Apr-27 21:58:27 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=16.924819828699999 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-27 21:58:27 INFO4 dopset_gen: New sky frequencies: 1381.165455 1381.165455 1381.165455 1381.165455 1381.165455 1381.165455 1381.165455 1381.165455 1381.165455 2008-Apr-27 21:58:27 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.165455 sky0=1381.165455 sky1=1381.165455 sky2=1381.165455 sky3=1381.165455 sky4=1381.165455 sky5=1381.165455 sky6=1381.165455 sky7=1381.165455 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-27 21:58:27 LOG2 dopset_gen: Result from 'sky2syn': 1631.165455 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-27 21:58:27 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631165455.0} 2008-Apr-27 21:58:27 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 21:58:27 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-27 21:58:27 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-27 21:58:27 INFO5 fixed_driftmap: Tracking J2000 position: RA = 12:19:42.6 Dec = +06:59:50.8 2008-Apr-27 21:58:27 LOG3 track_source: Calling 'track_source AGESVC1A_p2_081 121942.6 065950.8 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-27 21:58:27 START begin_task: Starting task 'sending tracking commands' 2008-Apr-27 21:58:27 LOG5 begin_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2008-Apr-27 21:58:27 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_081} INFO {Slewing to source 'AGESVC1A_p2_081' ...} 2008-Apr-27 21:58:27 INFO1 track_source: Starting to track AGESVC1A_p2_081 2008-Apr-27 21:58:27 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_081" 2008-Apr-27 21:58:27 LOG3 vw_send: To DATATAKING: set ra 121942.6 2008-Apr-27 21:58:27 LOG3 vw_send: To DATATAKING: set dec 065950.8 2008-Apr-27 21:58:27 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-27 21:58:27 LOG3 vw_send: To DATATAKING: pnt tr 121942.6 065950.8 -CJ 2008-Apr-27 21:58:27 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 21:58:27 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-27 21:58:27 LOG5 finish_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2008-Apr-27 21:58:27 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-27 21:58:27 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 21:58:27 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-27 21:58:27 LOG5 end_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2008-Apr-27 21:58:27 START begin_task: Starting task 'waiting on telescope' 2008-Apr-27 21:58:27 LOG5 begin_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2008-Apr-27 21:58:27 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-27 21:58:27 LOG3 waittrk: Start waittrk 5 2008-Apr-27 21:58:27 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-27 21:58:27 LOG5 begin_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2008-Apr-27 21:58:27 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631165455.0} 2008-Apr-27 21:58:27 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 21:58:27 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_081" 2008-Apr-27 21:58:27 LOG4 got_cormsg: From DATATAKING: set ra 121942.6 2008-Apr-27 21:58:27 LOG4 got_cormsg: From DATATAKING: set dec 065950.8 2008-Apr-27 21:58:27 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-27 21:58:27 LOG4 got_cormsg: From DATATAKING: vw% 121942.6 2008-Apr-27 21:58:27 LOG4 got_cormsg: From DATATAKING: vw% 065950.8 2008-Apr-27 21:58:27 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 21:58:27 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-27 21:58:27 LOG4 got_cormsg: From DATATAKING: pnt tr 121942.6 065950.8 -CJ 2008-Apr-27 21:58:27 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 21:58:27 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-27 21:58:27 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 21:58:32 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-27 21:58:32 LOG5 end_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2008-Apr-27 21:58:32 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-27 21:58:32 LOG5 begin_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2008-Apr-27 21:58:34 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-27 21:58:34 LOG5 end_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2008-Apr-27 21:58:34 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-27 21:58:34 INFO2 waittrk: Now tracking AGESVC1A_p2_081 2008-Apr-27 21:58:35 LOG4 waittrk: Current telescope position: Az = 332.79 ZA = 12.68 2008-Apr-27 21:58:35 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-27 21:58:35 LOG5 finish_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2008-Apr-27 21:58:35 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-27 21:58:35 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 21:58:35 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-27 21:58:35 LOG5 end_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2008-Apr-27 21:58:35 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-27 21:58:35 LOG5 begin_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2008-Apr-27 21:58:35 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-27 21:58:35 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-27 21:58:35 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-27 21:58:35 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-27 21:58:35 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 21:58:35 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-27 21:58:35 LOG5 begin_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2008-Apr-27 21:58:35 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-27 21:58:35 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 21:58:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 21:58:35 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-27 21:58:35 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-27 21:58:35 LOG5 end_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2008-Apr-27 21:58:35 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-27 21:58:35 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-27 21:58:35 LOG5 begin_task: Level: (4) ID = <10071> Status = 0 0 0 0 ok 2008-Apr-27 21:58:35 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-27 21:58:35 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-27 21:58:35 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-27 21:58:35 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-27 21:58:35 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-27 21:58:35 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-27 21:58:35 LOG5 begin_task: Level: (5) ID = <10072> Status = 0 0 0 0 ok 2008-Apr-27 21:58:35 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-27 21:58:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 21:58:35 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 9 dB --- beam 1: 7 6 dB 2008-Apr-27 21:58:35 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 6 dB 2008-Apr-27 21:58:35 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-27 21:58:35 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 2 3 dB 2008-Apr-27 21:58:35 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-27 21:58:35 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-27 21:58:35 LOG5 end_task: Level: (5) ID = <10072> Status = 0 0 0 0 ok 2008-Apr-27 21:58:35 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.891 1.059 ALFA beam 1: 1.129 1.091 2008-Apr-27 21:58:36 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.040 0.957 ALFA beam 3: 0.989 1.044 2008-Apr-27 21:58:36 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.918 0.965 ALFA beam 5: 1.006 0.903 2008-Apr-27 21:58:36 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.002 1.029 ALFA beam 7: 1.091 0.918 2008-Apr-27 21:58:36 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-27 21:58:36 LOG5 finish_task: Level: (4) ID = <10071> Status = 0 0 0 0 ok 2008-Apr-27 21:58:36 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-27 21:58:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 21:58:36 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-27 21:58:36 LOG5 end_task: Level: (4) ID = <10071> Status = 0 0 0 0 ok 2008-Apr-27 21:58:36 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-27 21:58:36 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-27 21:58:36 LOG5 finish_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2008-Apr-27 21:58:36 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-27 21:58:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 21:58:36 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-27 21:58:36 LOG5 end_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2008-Apr-27 21:58:36 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 ss 2008-Apr-27 21:58:36 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 ss 2008-Apr-27 21:58:36 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 ss 2008-Apr-27 21:58:36 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 ss 2008-Apr-27 21:58:36 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-27 21:58:36 START begin_task: Starting task 'WAPP calibration' 2008-Apr-27 21:58:36 LOG5 begin_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2008-Apr-27 21:58:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-27 21:58:36 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-27 21:58:36 START begin_task: Starting task 'selecting calibration type' 2008-Apr-27 21:58:36 LOG5 begin_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2008-Apr-27 21:58:36 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-27 21:58:36 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-27 21:58:36 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 21:58:36 START begin_task: Starting task 'waiting on setcal' 2008-Apr-27 21:58:36 LOG5 begin_task: Level: (5) ID = <10075> Status = 0 0 0 0 ok 2008-Apr-27 21:58:36 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 ss' 2008-Apr-27 21:58:36 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-27 21:58:36 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 21:58:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 21:58:36 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-27 21:58:36 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-27 21:58:36 LOG5 end_task: Level: (5) ID = <10075> Status = 0 0 0 0 ok 2008-Apr-27 21:58:36 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-27 21:58:36 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 21:58:36 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-27 21:58:36 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 21:58:36 LOG5 begin_task: Level: (5) ID = <10076> Status = 0 0 0 0 ok 2008-Apr-27 21:58:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 21:58:36 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 21:58:36 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 21:58:36 LOG5 end_task: Level: (5) ID = <10076> Status = 0 0 0 0 ok 2008-Apr-27 21:58:36 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 21:58:36 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-27 21:58:36 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 21:58:36 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-27 21:58:36 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 21:58:36 LOG5 begin_task: Level: (5) ID = <10077> Status = 0 0 0 0 ok 2008-Apr-27 21:58:36 NOTE WAPPDATA-new_file: New FITS file: wapp.20080427.a2048.0006.fits 2008-Apr-27 21:58:36 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 21:58:36 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 21:58:36 LOG5 end_task: Level: (5) ID = <10077> Status = 0 0 0 0 ok 2008-Apr-27 21:58:36 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 21:58:36 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-27 21:58:36 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-27 21:58:36 LOG5 finish_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2008-Apr-27 21:58:36 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-27 21:58:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 21:58:36 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-27 21:58:36 LOG5 end_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2008-Apr-27 21:58:36 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-27 21:58:37 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-27 21:58:37 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-27 21:58:37 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-27 21:58:37 LOG5 begin_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2008-Apr-27 21:58:37 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080427.a2048.0006.fits} 2008-Apr-27 21:58:37 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-27 21:58:37 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-27 21:58:37 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-27 21:58:37 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-27 21:58:37 LOG5 end_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2008-Apr-27 21:58:37 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-27 21:58:37 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-27 21:58:37 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-27 21:58:37 LOG5 begin_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2008-Apr-27 21:58:37 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-27 21:58:37 LOG5 log_alfabeam: Parameters: 12.328500000000002 6.9974444444444455 11.954162 2008.3255734276372 41.399944 2008-Apr-27 21:58:37 LOG4 log_alfabeam: ALFABEAM 0 12.328499999999991 6.997444444444448 2008-Apr-27 21:58:37 LOG4 log_alfabeam: ALFABEAM 1 12.326561225067913 7.099543984347926 2008-Apr-27 21:58:37 LOG4 log_alfabeam: ALFABEAM 2 12.322320367995868 7.031900789704590 2008-Apr-27 21:58:37 LOG4 log_alfabeam: ALFABEAM 3 12.324210809102397 6.929593318734288 2008-Apr-27 21:58:37 LOG4 log_alfabeam: ALFABEAM 4 12.330419447462445 6.895239871735274 2008-Apr-27 21:58:37 LOG4 log_alfabeam: ALFABEAM 5 12.334713634625524 6.963621537317223 2008-Apr-27 21:58:37 LOG4 log_alfabeam: ALFABEAM 6 12.332745915148731 7.065615152165993 2008-Apr-27 21:58:37 INFO2 take_spectra: Starting WAPP scan: 811800104 2008-Apr-27 21:58:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-27 21:58:37 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-27 21:58:37 LOG5 begin_task: Level: (5) ID = <10080> Status = 0 0 0 0 ok 2008-Apr-27 21:58:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 21:58:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7118.00 2008-Apr-27 21:58:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.165455 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 21:58:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.165455 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 21:58:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.165455 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 21:58:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.165455 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-27 21:58:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.165455 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 21:58:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.165455 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-27 21:58:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.165455 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-27 21:58:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.165455 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-27 21:58:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.165455 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-27 21:58:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 21:58:43 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-27 21:58:43 LOG5 end_task: Level: (5) ID = <10080> Status = 0 0 0 0 ok 2008-Apr-27 21:58:43 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-27 21:58:43 LOG5 end_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2008-Apr-27 21:58:43 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-27 21:58:43 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-27 21:58:43 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-27 21:58:43 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-27 21:58:43 LOG5 begin_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2008-Apr-27 21:58:43 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-27 21:58:43 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-27 21:58:43 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-27 21:58:43 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-27 21:58:43 LOG5 end_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2008-Apr-27 21:58:43 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-27 21:58:43 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-27 21:58:43 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-27 21:58:43 LOG5 begin_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2008-Apr-27 21:58:43 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-27 21:58:43 LOG5 log_alfabeam: Parameters: 12.328500000000002 6.9974444444444455 11.956112 2008.3255736494536 41.399944 2008-Apr-27 21:58:43 LOG4 log_alfabeam: ALFABEAM 0 12.328499999999996 6.997444444444447 2008-Apr-27 21:58:43 LOG4 log_alfabeam: ALFABEAM 1 12.326574739630086 7.099600629774065 2008-Apr-27 21:58:43 LOG4 log_alfabeam: ALFABEAM 2 12.322324958834292 7.032082402699270 2008-Apr-27 21:58:43 LOG4 log_alfabeam: ALFABEAM 3 12.324201812508781 6.929719492788021 2008-Apr-27 21:58:43 LOG4 log_alfabeam: ALFABEAM 4 12.330405905907158 6.895183689133423 2008-Apr-27 21:58:43 LOG4 log_alfabeam: ALFABEAM 5 12.334709161433610 6.963439587093139 2008-Apr-27 21:58:43 LOG4 log_alfabeam: ALFABEAM 6 12.332754910368600 7.065490582663288 2008-Apr-27 21:58:43 INFO2 take_spectra: Starting WAPP scan: 811800105 2008-Apr-27 21:58:44 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-27 21:58:44 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-27 21:58:44 LOG5 begin_task: Level: (5) ID = <10083> Status = 0 0 0 0 ok 2008-Apr-27 21:58:44 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 21:58:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.535 > 1.4)! 2008-Apr-27 21:58:44 LOG4 check_wapp_levels: WAPP-1 power levels: 1.229 1.428 1.524 1.466 2008-Apr-27 21:58:44 LOG4 check_wapp_levels: WAPP-2 power levels: 1.412 1.313 1.366 1.435 2008-Apr-27 21:58:44 LOG4 check_wapp_levels: WAPP-3 power levels: 1.281 1.341 1.401 1.212 2008-Apr-27 21:58:44 LOG4 check_wapp_levels: WAPP-4 power levels: 1.409 1.434 1.535 1.279 2008-Apr-27 21:58:44 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7125.00 2008-Apr-27 21:58:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.165455 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 21:58:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.165455 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 21:58:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.165455 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 21:58:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.165455 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-27 21:58:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.165455 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 21:58:50 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.888 and 1.133 2008-Apr-27 21:58:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.165455 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-27 21:58:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.165455 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-27 21:58:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.165455 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-27 21:58:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.165455 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-27 21:58:50 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-27 21:58:50 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 21:58:50 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-27 21:58:50 LOG5 end_task: Level: (5) ID = <10083> Status = 0 0 0 0 ok 2008-Apr-27 21:58:50 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-27 21:58:50 LOG5 end_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2008-Apr-27 21:58:50 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-27 21:58:50 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-27 21:58:50 LOG5 finish_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2008-Apr-27 21:58:50 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-27 21:58:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 21:58:50 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-27 21:58:50 LOG5 end_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2008-Apr-27 21:58:50 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-27 21:58:50 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 333.11 and ZA = 12.70 2008-Apr-27 21:58:50 LOG3 track_source: Calling 'track_source AGESVC1A_p2_081 333.11 12.7034303716 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-27 21:58:50 START begin_task: Starting task 'sending tracking commands' 2008-Apr-27 21:58:50 LOG5 begin_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2008-Apr-27 21:58:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_081} INFO {Slewing to source 'AGESVC1A_p2_081' ...} 2008-Apr-27 21:58:50 INFO1 track_source: Starting to track AGESVC1A_p2_081 2008-Apr-27 21:58:50 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_081" 2008-Apr-27 21:58:50 LOG3 vw_send: To DATATAKING: set ra 333.11 2008-Apr-27 21:58:50 LOG3 vw_send: To DATATAKING: set dec 12.7034303716 2008-Apr-27 21:58:50 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-27 21:58:50 LOG3 vw_send: To DATATAKING: pnt tr 333.11 12.7034303716 -CF 2008-Apr-27 21:58:50 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 21:58:50 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-27 21:58:50 LOG5 finish_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2008-Apr-27 21:58:50 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-27 21:58:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 21:58:51 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-27 21:58:51 LOG5 end_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2008-Apr-27 21:58:51 LOG1 fixed_driftmap: Parameters: HA = -00:23:00.1 Start = 11:46:27.1 LST = 11:57:29.0 diff = -661.9 secs 2008-Apr-27 21:58:51 WARNING fixed_driftmap: WARNING RA has already passed --- starting anyway! 2008-Apr-27 21:58:51 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-27 21:58:51 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-27 21:58:51 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-27 21:58:51 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-27 21:58:51 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-27 21:58:51 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-27 21:58:51 LOG5 begin_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2008-Apr-27 21:58:51 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-27 21:58:51 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-27 21:58:51 INFO2 take_spectra: Starting WAPP scan: 811800106 2008-Apr-27 21:58:51 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-27 21:58:51 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-27 21:58:51 LOG5 begin_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2008-Apr-27 21:58:51 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 21:58:51 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_081" 2008-Apr-27 21:58:51 LOG4 got_cormsg: From DATATAKING: set ra 333.11 2008-Apr-27 21:58:51 LOG4 got_cormsg: From DATATAKING: set dec 12.7034303716 2008-Apr-27 21:58:51 LOG4 got_cormsg: From DATATAKING: vw% 333.11 2008-Apr-27 21:58:51 LOG4 got_cormsg: From DATATAKING: vw% 12.7034303716 2008-Apr-27 21:58:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 21:58:51 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-27 21:58:51 LOG4 got_cormsg: From DATATAKING: pnt tr 333.11 12.7034303716 -CF 2008-Apr-27 21:58:51 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 21:58:51 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-27 21:58:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 21:58:51 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7132.00 2008-Apr-27 21:58:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.165455 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 21:58:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.165455 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 21:58:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.165455 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 21:58:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.165455 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-27 21:58:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.165455 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 21:58:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.165455 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-27 21:58:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.165455 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-27 21:58:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.165455 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-27 21:58:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.165455 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-27 21:58:55 WARNING WAPP=1+2+3+4-start_spectra: WARNING observing when not on source 2008-Apr-27 21:59:04 NOTE WAPP=1+2+3+4-start_spectra: Observing now on source 2008-Apr-27 22:18:35 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 22:18:35.300 (seconds: 80315.300)!} 2008-Apr-27 22:18:35 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 22:18:35.300 (seconds: 80315.300)! 2008-Apr-27 22:18:36 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 80314.0 to 80315.0! 2008-Apr-27 22:18:37 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (80314.0 - 80316.0)! 2008-Apr-27 22:18:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 22:18:52 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-27 22:18:52 LOG5 end_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2008-Apr-27 22:18:52 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-27 22:18:52 LOG5 end_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2008-Apr-27 22:18:52 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-27 22:18:52 LOG5 finish_task: Level: (2) ID = <10054> Status = 0 0 0 0 ok 2008-Apr-27 22:18:52 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-27 22:18:52 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-27 22:18:52 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-27 22:18:52 LOG5 end_task: Level: (2) ID = <10054> Status = 0 0 0 0 ok 2008-Apr-27 22:18:52 COMMAND run_command_line: EXECUTING command 39: 'FIXEDDRIFT az=0.00 alfaangle=19.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_042 ra=120900.00 dec=75830.00' 2008-Apr-27 22:18:52 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-27 22:18:53 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-27 22:18:53 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 0.00 19.1 hcorcal 5 tracking no first 1 AGESVC1A_p2_042 120900.00 75830.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-27 22:18:53 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-27 22:18:53 LOG5 begin_task: Level: (2) ID = <10087> Status = 0 0 0 0 ok 2008-Apr-27 22:18:53 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGESVC1A_p2_081' 2008-Apr-27 22:18:53 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-27 22:18:53 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1A_p2_042} 2008-Apr-27 22:18:53 INFO3 fixed_driftmap: Sending telescope to Az = 0.00 and ZA = 10.43 2008-Apr-27 22:18:53 LOG3 track_source: Calling 'track_source AGESVC1A_p2_042 0.00 10.4274704803 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-27 22:18:53 START begin_task: Starting task 'sending tracking commands' 2008-Apr-27 22:18:53 LOG5 begin_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2008-Apr-27 22:18:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_042} INFO {Slewing to source 'AGESVC1A_p2_042' ...} 2008-Apr-27 22:18:53 INFO1 track_source: Starting to track AGESVC1A_p2_042 2008-Apr-27 22:18:53 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_042" 2008-Apr-27 22:18:53 LOG3 vw_send: To DATATAKING: set ra 0.00 2008-Apr-27 22:18:53 LOG3 vw_send: To DATATAKING: set dec 10.4274704803 2008-Apr-27 22:18:53 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-27 22:18:53 LOG3 vw_send: To DATATAKING: pnt tr 0.00 10.4274704803 -CF 2008-Apr-27 22:18:53 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 22:18:53 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-27 22:18:53 LOG5 finish_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2008-Apr-27 22:18:53 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-27 22:18:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 22:18:53 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-27 22:18:53 LOG5 end_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2008-Apr-27 22:18:53 START begin_task: Starting task 'rotate ALFA to +19.1 degrees' 2008-Apr-27 22:18:53 LOG5 begin_task: Level: (3) ID = <10089> Status = 0 0 0 0 ok 2008-Apr-27 22:18:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19.1 degrees ...} 2008-Apr-27 22:18:53 INFO2 rotate_alfa: ALFA commanded to +19.1 degrees 2008-Apr-27 22:18:53 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19.1 REPLY 2008-Apr-27 22:18:53 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-27 22:18:53 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-27 22:18:53 LOG5 begin_task: Level: (4) ID = <10090> Status = 0 0 0 0 ok 2008-Apr-27 22:18:53 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_042" 2008-Apr-27 22:18:53 LOG4 got_cormsg: From DATATAKING: set ra 0.00 2008-Apr-27 22:18:53 LOG4 got_cormsg: From DATATAKING: set dec 10.4274704803 2008-Apr-27 22:18:53 LOG4 got_cormsg: From DATATAKING: vw% 0.00 2008-Apr-27 22:18:53 LOG4 got_cormsg: From DATATAKING: vw% 10.4274704803 2008-Apr-27 22:18:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 22:18:53 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-27 22:18:53 LOG4 got_cormsg: From DATATAKING: pnt tr 0.00 10.4274704803 -CF 2008-Apr-27 22:18:53 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 22:18:53 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-27 22:18:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 22:19:07 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-27 22:19:07 INFO3 alfa_motor: ALFA rotator in-position +19.10 degrees 2008-Apr-27 22:19:07 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-27 22:19:07 LOG5 end_task: Level: (4) ID = <10090> Status = 0 0 0 0 ok 2008-Apr-27 22:19:07 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-27 22:19:07 STOP finish_task: Finishing task 'rotate ALFA to +19.1 degrees' 2008-Apr-27 22:19:07 LOG5 finish_task: Level: (3) ID = <10089> Status = 0 0 0 0 ok 2008-Apr-27 22:19:07 INFO2 finish_task: DONE finished configuration: rotating ALFA to +19.1 degrees 2008-Apr-27 22:19:07 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 22:19:07 STOP end_task: Finishing task 'rotate ALFA to +19.1 degrees' with status 'OK' 2008-Apr-27 22:19:07 LOG5 end_task: Level: (3) ID = <10089> Status = 0 0 0 0 ok 2008-Apr-27 22:19:07 START begin_task: Starting task 'waiting on telescope' 2008-Apr-27 22:19:07 LOG5 begin_task: Level: (3) ID = <10091> Status = 0 0 0 0 ok 2008-Apr-27 22:19:07 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-27 22:19:07 LOG3 waittrk: Start waittrk 5 2008-Apr-27 22:19:07 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-27 22:19:07 LOG5 begin_task: Level: (4) ID = <10092> Status = 0 0 0 0 ok 2008-Apr-27 22:19:12 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-27 22:19:12 LOG5 end_task: Level: (4) ID = <10092> Status = 0 0 0 0 ok 2008-Apr-27 22:19:12 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-27 22:19:12 LOG5 begin_task: Level: (4) ID = <10093> Status = 0 0 0 0 ok 2008-Apr-27 22:20:14 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-27 22:20:14 LOG5 end_task: Level: (4) ID = <10093> Status = 0 0 0 0 ok 2008-Apr-27 22:20:14 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-27 22:20:14 INFO2 waittrk: Now tracking AGESVC1A_p2_042 2008-Apr-27 22:20:14 LOG4 waittrk: Current telescope position: Az = 359.64 ZA = 10.39 2008-Apr-27 22:20:14 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-27 22:20:14 LOG5 finish_task: Level: (3) ID = <10091> Status = 0 0 0 0 ok 2008-Apr-27 22:20:14 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-27 22:20:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 22:20:14 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-27 22:20:14 LOG5 end_task: Level: (3) ID = <10091> Status = 0 0 0 0 ok 2008-Apr-27 22:20:14 START begin_task: Starting task 'selecting calibration type' 2008-Apr-27 22:20:14 LOG5 begin_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2008-Apr-27 22:20:14 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-27 22:20:14 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-27 22:20:14 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 22:20:14 START begin_task: Starting task 'waiting on setcal' 2008-Apr-27 22:20:14 LOG5 begin_task: Level: (4) ID = <10095> Status = 0 0 0 0 ok 2008-Apr-27 22:20:14 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-27 22:20:14 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 22:20:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 22:20:15 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-27 22:20:15 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-27 22:20:15 LOG5 end_task: Level: (4) ID = <10095> Status = 0 0 0 0 ok 2008-Apr-27 22:20:15 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-27 22:20:15 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 22:20:15 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-27 22:20:15 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 22:20:15 LOG5 begin_task: Level: (4) ID = <10096> Status = 0 0 0 0 ok 2008-Apr-27 22:20:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 22:20:15 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 22:20:15 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 22:20:15 LOG5 end_task: Level: (4) ID = <10096> Status = 0 0 0 0 ok 2008-Apr-27 22:20:15 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 22:20:15 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-27 22:20:15 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 22:20:15 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-27 22:20:15 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 22:20:15 LOG5 begin_task: Level: (4) ID = <10097> Status = 0 0 0 0 ok 2008-Apr-27 22:20:15 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 22:20:15 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 22:20:15 LOG5 end_task: Level: (4) ID = <10097> Status = 0 0 0 0 ok 2008-Apr-27 22:20:15 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 22:20:15 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-27 22:20:15 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-27 22:20:15 LOG5 finish_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2008-Apr-27 22:20:15 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-27 22:20:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 22:20:15 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-27 22:20:15 LOG5 end_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2008-Apr-27 22:20:15 LOG5 dopset_later: Calling 'dopset_later 0' 2008-Apr-27 22:20:15 INFO3 dopset_later: Setting Doppler correction now 2008-Apr-27 22:20:15 LOG5 antvel: Calling 'antvel 0.000000 10.427470 F 0' 2008-Apr-27 22:20:15 LOG2 antvel: Parameters to Doppler: Heliocentric 94815 2008 118 0.0 2008-Apr-27 22:20:15 INFO5 antvel: Computed antenna velocity: +17.20973 km/s 2008-Apr-27 22:20:15 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=17.209725356700002 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-27 22:20:15 INFO4 dopset_gen: New sky frequencies: 1381.164142 1381.164142 1381.164142 1381.164142 1381.164142 1381.164142 1381.164142 1381.164142 1381.164142 2008-Apr-27 22:20:15 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.164142 sky0=1381.164142 sky1=1381.164142 sky2=1381.164142 sky3=1381.164142 sky4=1381.164142 sky5=1381.164142 sky6=1381.164142 sky7=1381.164142 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-27 22:20:15 LOG2 dopset_gen: Result from 'sky2syn': 1631.164142 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-27 22:20:15 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631164142.0} 2008-Apr-27 22:20:15 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 22:20:15 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-27 22:20:15 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-27 22:20:15 INFO5 fixed_driftmap: Tracking J2000 position: RA = 12:18:35.1 Dec = +07:58:21.1 2008-Apr-27 22:20:15 LOG3 track_source: Calling 'track_source AGESVC1A_p2_042 121835.1 075821.1 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-27 22:20:15 START begin_task: Starting task 'sending tracking commands' 2008-Apr-27 22:20:15 LOG5 begin_task: Level: (3) ID = <10098> Status = 0 0 0 0 ok 2008-Apr-27 22:20:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_042} INFO {Slewing to source 'AGESVC1A_p2_042' ...} 2008-Apr-27 22:20:16 INFO1 track_source: Starting to track AGESVC1A_p2_042 2008-Apr-27 22:20:16 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_042" 2008-Apr-27 22:20:16 LOG3 vw_send: To DATATAKING: set ra 121835.1 2008-Apr-27 22:20:16 LOG3 vw_send: To DATATAKING: set dec 075821.1 2008-Apr-27 22:20:16 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-27 22:20:16 LOG3 vw_send: To DATATAKING: pnt tr 121835.1 075821.1 -CJ 2008-Apr-27 22:20:16 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 22:20:16 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-27 22:20:16 LOG5 finish_task: Level: (3) ID = <10098> Status = 0 0 0 0 ok 2008-Apr-27 22:20:16 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-27 22:20:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 22:20:16 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-27 22:20:16 LOG5 end_task: Level: (3) ID = <10098> Status = 0 0 0 0 ok 2008-Apr-27 22:20:16 START begin_task: Starting task 'waiting on telescope' 2008-Apr-27 22:20:16 LOG5 begin_task: Level: (3) ID = <10099> Status = 0 0 0 0 ok 2008-Apr-27 22:20:16 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-27 22:20:16 LOG3 waittrk: Start waittrk 5 2008-Apr-27 22:20:16 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-27 22:20:16 LOG5 begin_task: Level: (4) ID = <10100> Status = 0 0 0 0 ok 2008-Apr-27 22:20:16 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631164142.0} 2008-Apr-27 22:20:16 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 22:20:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 22:20:16 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_042" 2008-Apr-27 22:20:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 22:20:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 22:20:16 LOG4 got_cormsg: From DATATAKING: set ra 121835.1 2008-Apr-27 22:20:16 LOG4 got_cormsg: From DATATAKING: set dec 075821.1 2008-Apr-27 22:20:16 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-27 22:20:16 LOG4 got_cormsg: From DATATAKING: pnt tr 121835.1 075821.1 -CJ 2008-Apr-27 22:20:16 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 22:20:16 LOG4 got_cormsg: From DATATAKING: 121835.1 2008-Apr-27 22:20:16 LOG4 got_cormsg: From DATATAKING: vw% 075821.1 2008-Apr-27 22:20:16 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2008-Apr-27 22:20:21 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-27 22:20:21 LOG5 end_task: Level: (4) ID = <10100> Status = 0 0 0 0 ok 2008-Apr-27 22:20:21 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-27 22:20:21 LOG5 begin_task: Level: (4) ID = <10101> Status = 0 0 0 0 ok 2008-Apr-27 22:20:23 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-27 22:20:23 LOG5 end_task: Level: (4) ID = <10101> Status = 0 0 0 0 ok 2008-Apr-27 22:20:23 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-27 22:20:23 INFO2 waittrk: Now tracking AGESVC1A_p2_042 2008-Apr-27 22:20:23 LOG4 waittrk: Current telescope position: Az = 359.73 ZA = 10.40 2008-Apr-27 22:20:23 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-27 22:20:23 LOG5 finish_task: Level: (3) ID = <10099> Status = 0 0 0 0 ok 2008-Apr-27 22:20:23 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-27 22:20:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 22:20:23 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-27 22:20:23 LOG5 end_task: Level: (3) ID = <10099> Status = 0 0 0 0 ok 2008-Apr-27 22:20:23 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-27 22:20:23 LOG5 begin_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2008-Apr-27 22:20:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-27 22:20:23 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-27 22:20:23 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-27 22:20:23 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-27 22:20:23 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 22:20:23 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-27 22:20:23 LOG5 begin_task: Level: (4) ID = <10103> Status = 0 0 0 0 ok 2008-Apr-27 22:20:23 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-27 22:20:23 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 22:20:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 22:20:23 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-27 22:20:23 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-27 22:20:23 LOG5 end_task: Level: (4) ID = <10103> Status = 0 0 0 0 ok 2008-Apr-27 22:20:23 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-27 22:20:23 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-27 22:20:23 LOG5 begin_task: Level: (4) ID = <10104> Status = 0 0 0 0 ok 2008-Apr-27 22:20:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-27 22:20:23 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-27 22:20:23 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-27 22:20:23 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-27 22:20:24 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-27 22:20:24 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-27 22:20:24 LOG5 begin_task: Level: (5) ID = <10105> Status = 0 0 0 0 ok 2008-Apr-27 22:20:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 22:20:24 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-27 22:20:24 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 9 dB --- beam 1: 7 6 dB 2008-Apr-27 22:20:24 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 5 dB 2008-Apr-27 22:20:24 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-27 22:20:24 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 2 3 dB 2008-Apr-27 22:20:24 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-27 22:20:24 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-27 22:20:24 LOG5 end_task: Level: (5) ID = <10105> Status = 0 0 0 0 ok 2008-Apr-27 22:20:24 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.103 1.053 ALFA beam 1: 1.116 1.074 2008-Apr-27 22:20:24 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.016 0.932 ALFA beam 3: 0.971 1.045 2008-Apr-27 22:20:24 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.913 0.955 ALFA beam 5: 1.002 1.140 2008-Apr-27 22:20:24 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.004 1.026 ALFA beam 7: 1.096 0.916 2008-Apr-27 22:20:24 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-27 22:20:24 LOG5 finish_task: Level: (4) ID = <10104> Status = 0 0 0 0 ok 2008-Apr-27 22:20:24 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-27 22:20:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 22:20:24 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-27 22:20:24 LOG5 end_task: Level: (4) ID = <10104> Status = 0 0 0 0 ok 2008-Apr-27 22:20:24 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-27 22:20:24 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-27 22:20:24 LOG5 finish_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2008-Apr-27 22:20:24 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-27 22:20:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 22:20:24 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-27 22:20:24 LOG5 end_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2008-Apr-27 22:20:24 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 ss 2008-Apr-27 22:20:24 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 ss 2008-Apr-27 22:20:24 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 ss 2008-Apr-27 22:20:24 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 ss 2008-Apr-27 22:20:24 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-27 22:20:24 START begin_task: Starting task 'WAPP calibration' 2008-Apr-27 22:20:24 LOG5 begin_task: Level: (3) ID = <10106> Status = 0 0 0 0 ok 2008-Apr-27 22:20:24 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-27 22:20:24 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-27 22:20:24 START begin_task: Starting task 'selecting calibration type' 2008-Apr-27 22:20:24 LOG5 begin_task: Level: (4) ID = <10107> Status = 0 0 0 0 ok 2008-Apr-27 22:20:24 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-27 22:20:25 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-27 22:20:25 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 22:20:25 START begin_task: Starting task 'waiting on setcal' 2008-Apr-27 22:20:25 LOG5 begin_task: Level: (5) ID = <10108> Status = 0 0 0 0 ok 2008-Apr-27 22:20:25 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 ss' 2008-Apr-27 22:20:25 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-27 22:20:25 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 22:20:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 22:20:25 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-27 22:20:25 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-27 22:20:25 LOG5 end_task: Level: (5) ID = <10108> Status = 0 0 0 0 ok 2008-Apr-27 22:20:25 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-27 22:20:25 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 22:20:25 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-27 22:20:25 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 22:20:25 LOG5 begin_task: Level: (5) ID = <10109> Status = 0 0 0 0 ok 2008-Apr-27 22:20:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 22:20:25 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 22:20:25 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 22:20:25 LOG5 end_task: Level: (5) ID = <10109> Status = 0 0 0 0 ok 2008-Apr-27 22:20:25 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 22:20:25 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-27 22:20:25 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 22:20:25 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-27 22:20:25 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 22:20:25 LOG5 begin_task: Level: (5) ID = <10110> Status = 0 0 0 0 ok 2008-Apr-27 22:20:25 NOTE WAPPDATA-new_file: New FITS file: wapp.20080427.a2048.0007.fits 2008-Apr-27 22:20:25 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 22:20:25 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 22:20:25 LOG5 end_task: Level: (5) ID = <10110> Status = 0 0 0 0 ok 2008-Apr-27 22:20:25 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 22:20:25 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-27 22:20:25 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-27 22:20:25 LOG5 finish_task: Level: (4) ID = <10107> Status = 0 0 0 0 ok 2008-Apr-27 22:20:25 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-27 22:20:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 22:20:25 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-27 22:20:25 LOG5 end_task: Level: (4) ID = <10107> Status = 0 0 0 0 ok 2008-Apr-27 22:20:25 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-27 22:20:25 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-27 22:20:25 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-27 22:20:25 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-27 22:20:25 LOG5 begin_task: Level: (4) ID = <10111> Status = 0 0 0 0 ok 2008-Apr-27 22:20:25 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080427.a2048.0007.fits} 2008-Apr-27 22:20:25 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-27 22:20:25 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-27 22:20:25 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-27 22:20:25 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-27 22:20:25 LOG5 end_task: Level: (4) ID = <10111> Status = 0 0 0 0 ok 2008-Apr-27 22:20:25 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-27 22:20:25 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-27 22:20:25 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-27 22:20:25 LOG5 begin_task: Level: (4) ID = <10112> Status = 0 0 0 0 ok 2008-Apr-27 22:20:25 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-27 22:20:25 LOG5 log_alfabeam: Parameters: 12.309750000000003 7.9725277777777794 12.318769 2008.3256149073441 19.099895 2008-Apr-27 22:20:25 LOG4 log_alfabeam: ALFABEAM 0 12.309750000001458 7.972527777777782 2008-Apr-27 22:20:25 LOG4 log_alfabeam: ALFABEAM 1 12.308617005901910 8.077331445416100 2008-Apr-27 22:20:25 LOG4 log_alfabeam: ALFABEAM 2 12.303960879799831 8.008010093162770 2008-Apr-27 22:20:25 LOG4 log_alfabeam: ALFABEAM 3 12.305056337239648 7.903100016462087 2008-Apr-27 22:20:25 LOG4 log_alfabeam: ALFABEAM 4 12.310905529912842 7.867750798421587 2008-Apr-27 22:20:25 LOG4 log_alfabeam: ALFABEAM 5 12.315576746264059 7.937733234139829 2008-Apr-27 22:20:25 LOG4 log_alfabeam: ALFABEAM 6 12.314383723732252 8.042399000890493 2008-Apr-27 22:20:25 INFO2 take_spectra: Starting WAPP scan: 811800107 2008-Apr-27 22:20:26 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-27 22:20:26 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-27 22:20:26 LOG5 begin_task: Level: (5) ID = <10113> Status = 0 0 0 0 ok 2008-Apr-27 22:20:26 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 22:20:26 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8427.00 2008-Apr-27 22:20:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.164142 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 22:20:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.164142 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 22:20:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.164142 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 22:20:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.164142 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-27 22:20:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.164142 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 22:20:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.552 > 1.4)! 2008-Apr-27 22:20:32 LOG4 check_wapp_levels: WAPP-1 power levels: 1.552 1.425 1.509 1.450 2008-Apr-27 22:20:32 LOG4 check_wapp_levels: WAPP-2 power levels: 1.387 1.285 1.348 1.437 2008-Apr-27 22:20:32 LOG4 check_wapp_levels: WAPP-3 power levels: 1.279 1.333 1.404 1.535 2008-Apr-27 22:20:32 LOG4 check_wapp_levels: WAPP-4 power levels: 1.412 1.433 1.541 1.280 2008-Apr-27 22:20:32 LOG3 WAPP=1+3+4-save_rfcalc: Channel 5: Sky freq = 1381.164142 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-27 22:20:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.164142 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-27 22:20:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.164142 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-27 22:20:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.164142 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-27 22:20:32 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 22:20:32 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-27 22:20:32 LOG5 end_task: Level: (5) ID = <10113> Status = 0 0 0 0 ok 2008-Apr-27 22:20:32 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-27 22:20:32 LOG5 end_task: Level: (4) ID = <10112> Status = 0 0 0 0 ok 2008-Apr-27 22:20:32 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-27 22:20:32 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-27 22:20:32 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-27 22:20:32 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-27 22:20:32 LOG5 begin_task: Level: (4) ID = <10114> Status = 0 0 0 0 ok 2008-Apr-27 22:20:32 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-27 22:20:32 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-27 22:20:32 LOG3 WAPP=2-save_rfcalc: Channel 5: Sky freq = 1381.164142 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-27 22:20:32 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-27 22:20:32 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-27 22:20:32 LOG5 end_task: Level: (4) ID = <10114> Status = 0 0 0 0 ok 2008-Apr-27 22:20:32 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-27 22:20:32 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-27 22:20:32 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-27 22:20:32 LOG5 begin_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2008-Apr-27 22:20:32 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-27 22:20:32 LOG5 log_alfabeam: Parameters: 12.309750000000003 7.9725277777777794 12.320718 2008.3256151291607 19.099895 2008-Apr-27 22:20:32 LOG4 log_alfabeam: ALFABEAM 0 12.309750000000367 7.972527777777782 2008-Apr-27 22:20:32 LOG4 log_alfabeam: ALFABEAM 1 12.308635892140128 8.077376104207753 2008-Apr-27 22:20:32 LOG4 log_alfabeam: ALFABEAM 2 12.303967290395375 8.008240067832439 2008-Apr-27 22:20:32 LOG4 log_alfabeam: ALFABEAM 3 12.305043849921827 7.903286825825854 2008-Apr-27 22:20:32 LOG4 log_alfabeam: ALFABEAM 4 12.310886657685119 7.867705243291050 2008-Apr-27 22:20:32 LOG4 log_alfabeam: ALFABEAM 5 12.315570456795339 7.937501753483893 2008-Apr-27 22:20:32 LOG4 log_alfabeam: ALFABEAM 6 12.314396293980604 8.042214567145322 2008-Apr-27 22:20:32 INFO2 take_spectra: Starting WAPP scan: 811800108 2008-Apr-27 22:20:33 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-27 22:20:33 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-27 22:20:33 LOG5 begin_task: Level: (5) ID = <10116> Status = 0 0 0 0 ok 2008-Apr-27 22:20:33 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 22:20:33 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8434.00 2008-Apr-27 22:20:38 INFO5 check_wapp_levels: WAPP power levels are between 1.279 and 1.552 (still bad) 2008-Apr-27 22:20:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.164142 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 22:20:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.164142 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 22:20:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.164142 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 22:20:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.164142 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-27 22:20:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.164142 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 22:20:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.164142 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-27 22:20:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.164142 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-27 22:20:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.164142 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-27 22:20:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.164142 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-27 22:20:39 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-27 22:20:39 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 22:20:39 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-27 22:20:39 LOG5 end_task: Level: (5) ID = <10116> Status = 0 0 0 0 ok 2008-Apr-27 22:20:39 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-27 22:20:39 LOG5 end_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2008-Apr-27 22:20:39 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-27 22:20:39 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-27 22:20:39 LOG5 finish_task: Level: (3) ID = <10106> Status = 0 0 0 0 ok 2008-Apr-27 22:20:39 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-27 22:20:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 22:20:39 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-27 22:20:39 LOG5 end_task: Level: (3) ID = <10106> Status = 0 0 0 0 ok 2008-Apr-27 22:20:39 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-27 22:20:39 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 0.00 and ZA = 10.43 2008-Apr-27 22:20:39 LOG3 track_source: Calling 'track_source AGESVC1A_p2_042 0.00 10.4274704803 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-27 22:20:39 START begin_task: Starting task 'sending tracking commands' 2008-Apr-27 22:20:39 LOG5 begin_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2008-Apr-27 22:20:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_042} INFO {Slewing to source 'AGESVC1A_p2_042' ...} 2008-Apr-27 22:20:39 INFO1 track_source: Starting to track AGESVC1A_p2_042 2008-Apr-27 22:20:39 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_042" 2008-Apr-27 22:20:39 LOG3 vw_send: To DATATAKING: set ra 0.00 2008-Apr-27 22:20:39 LOG3 vw_send: To DATATAKING: set dec 10.4274704803 2008-Apr-27 22:20:39 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-27 22:20:39 LOG3 vw_send: To DATATAKING: pnt tr 0.00 10.4274704803 -CF 2008-Apr-27 22:20:39 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 22:20:39 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-27 22:20:39 LOG5 finish_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2008-Apr-27 22:20:39 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-27 22:20:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 22:20:40 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-27 22:20:40 LOG5 end_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2008-Apr-27 22:20:40 LOG1 fixed_driftmap: Parameters: HA = +00:00:00.0 Start = 12:09:27.2 LST = 12:19:21.6 diff = -594.4 secs 2008-Apr-27 22:20:40 WARNING fixed_driftmap: WARNING RA has already passed --- starting anyway! 2008-Apr-27 22:20:40 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-27 22:20:40 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-27 22:20:40 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-27 22:20:40 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-27 22:20:40 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-27 22:20:40 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-27 22:20:40 LOG5 begin_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2008-Apr-27 22:20:40 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-27 22:20:40 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-27 22:20:40 INFO2 take_spectra: Starting WAPP scan: 811800109 2008-Apr-27 22:20:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-27 22:20:40 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-27 22:20:40 LOG5 begin_task: Level: (4) ID = <10119> Status = 0 0 0 0 ok 2008-Apr-27 22:20:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 22:20:40 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_042" 2008-Apr-27 22:20:40 LOG4 got_cormsg: From DATATAKING: set ra 0.00 2008-Apr-27 22:20:40 LOG4 got_cormsg: From DATATAKING: set dec 10.4274704803 2008-Apr-27 22:20:40 LOG4 got_cormsg: From DATATAKING: vw% 0.00 2008-Apr-27 22:20:40 LOG4 got_cormsg: From DATATAKING: vw% 10.4274704803 2008-Apr-27 22:20:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 22:20:40 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-27 22:20:40 LOG4 got_cormsg: From DATATAKING: pnt tr 0.00 10.4274704803 -CF 2008-Apr-27 22:20:40 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 22:20:40 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-27 22:20:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 22:20:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8441.00 2008-Apr-27 22:20:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.164142 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 22:20:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.164142 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 22:20:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.164142 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 22:20:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.164142 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-27 22:20:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.164142 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 22:20:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.164142 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-27 22:20:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.164142 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-27 22:20:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.164142 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-27 22:20:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.164142 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-27 22:20:44 WARNING WAPP=1+2+3+4-start_spectra: WARNING observing when not on source 2008-Apr-27 22:20:44 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.915 and 1.139 2008-Apr-27 22:20:53 NOTE WAPP=1+2+3+4-start_spectra: Observing now on source 2008-Apr-27 22:40:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 22:40:41 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-27 22:40:41 LOG5 end_task: Level: (4) ID = <10119> Status = 0 0 0 0 ok 2008-Apr-27 22:40:41 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-27 22:40:41 LOG5 end_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2008-Apr-27 22:40:41 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-27 22:40:41 LOG5 finish_task: Level: (2) ID = <10087> Status = 0 0 0 0 ok 2008-Apr-27 22:40:41 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-27 22:40:41 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-27 22:40:41 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-27 22:40:41 LOG5 end_task: Level: (2) ID = <10087> Status = 0 0 0 0 ok 2008-Apr-27 22:40:42 COMMAND run_command_line: EXECUTING command 43: 'FIXEDDRIFT az=28.83 alfaangle=-5.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_044 ra=120900.00 dec=75530.00' 2008-Apr-27 22:40:42 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-27 22:40:42 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-27 22:40:42 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 28.83 -5.0 hcorcal 5 tracking no first 1 AGESVC1A_p2_044 120900.00 75530.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-27 22:40:42 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-27 22:40:42 LOG5 begin_task: Level: (2) ID = <10120> Status = 0 0 0 0 ok 2008-Apr-27 22:40:42 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGESVC1A_p2_042' 2008-Apr-27 22:40:42 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-27 22:40:42 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1A_p2_044} 2008-Apr-27 22:40:42 INFO3 fixed_driftmap: Sending telescope to Az = 28.83 and ZA = 11.88 2008-Apr-27 22:40:42 LOG3 track_source: Calling 'track_source AGESVC1A_p2_044 28.83 11.8755249401 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-27 22:40:42 START begin_task: Starting task 'sending tracking commands' 2008-Apr-27 22:40:42 LOG5 begin_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2008-Apr-27 22:40:42 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_044} INFO {Slewing to source 'AGESVC1A_p2_044' ...} 2008-Apr-27 22:40:42 INFO1 track_source: Starting to track AGESVC1A_p2_044 2008-Apr-27 22:40:42 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_044" 2008-Apr-27 22:40:42 LOG3 vw_send: To DATATAKING: set ra 28.83 2008-Apr-27 22:40:42 LOG3 vw_send: To DATATAKING: set dec 11.8755249401 2008-Apr-27 22:40:42 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-27 22:40:42 LOG3 vw_send: To DATATAKING: pnt tr 28.83 11.8755249401 -CF 2008-Apr-27 22:40:42 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 22:40:42 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-27 22:40:42 LOG5 finish_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2008-Apr-27 22:40:42 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-27 22:40:42 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 22:40:42 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-27 22:40:42 LOG5 end_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2008-Apr-27 22:40:42 START begin_task: Starting task 'rotate ALFA to -5 degrees' 2008-Apr-27 22:40:42 LOG5 begin_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2008-Apr-27 22:40:42 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -5 degrees ...} 2008-Apr-27 22:40:42 INFO2 rotate_alfa: ALFA commanded to -5.0 degrees 2008-Apr-27 22:40:42 LOG3 sock_errsend: To ALFAMOTOR: POSITION -5.0 REPLY 2008-Apr-27 22:40:42 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-27 22:40:42 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-27 22:40:42 LOG5 begin_task: Level: (4) ID = <10123> Status = 0 0 0 0 ok 2008-Apr-27 22:40:42 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_044" 2008-Apr-27 22:40:42 LOG4 got_cormsg: From DATATAKING: set ra 28.83 2008-Apr-27 22:40:42 LOG4 got_cormsg: From DATATAKING: set dec 11.8755249401 2008-Apr-27 22:40:42 LOG4 got_cormsg: From DATATAKING: vw% 28.83 2008-Apr-27 22:40:42 LOG4 got_cormsg: From DATATAKING: vw% 11.8755249401 2008-Apr-27 22:40:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 22:40:42 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-27 22:40:43 LOG4 got_cormsg: From DATATAKING: pnt tr 28.83 11.8755249401 -CF 2008-Apr-27 22:40:43 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 22:40:43 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-27 22:40:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 22:40:57 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-27 22:40:57 INFO3 alfa_motor: ALFA rotator in-position -5.00 degrees 2008-Apr-27 22:40:57 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-27 22:40:57 LOG5 end_task: Level: (4) ID = <10123> Status = 0 0 0 0 ok 2008-Apr-27 22:40:57 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-27 22:40:57 STOP finish_task: Finishing task 'rotate ALFA to -5 degrees' 2008-Apr-27 22:40:57 LOG5 finish_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2008-Apr-27 22:40:57 INFO2 finish_task: DONE finished configuration: rotating ALFA to -5 degrees 2008-Apr-27 22:40:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 22:40:57 STOP end_task: Finishing task 'rotate ALFA to -5 degrees' with status 'OK' 2008-Apr-27 22:40:57 LOG5 end_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2008-Apr-27 22:40:57 START begin_task: Starting task 'waiting on telescope' 2008-Apr-27 22:40:57 LOG5 begin_task: Level: (3) ID = <10124> Status = 0 0 0 0 ok 2008-Apr-27 22:40:57 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-27 22:40:57 LOG3 waittrk: Start waittrk 5 2008-Apr-27 22:40:57 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-27 22:40:57 LOG5 begin_task: Level: (4) ID = <10125> Status = 0 0 0 0 ok 2008-Apr-27 22:41:02 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-27 22:41:02 LOG5 end_task: Level: (4) ID = <10125> Status = 0 0 0 0 ok 2008-Apr-27 22:41:02 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-27 22:41:02 LOG5 begin_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2008-Apr-27 22:42:08 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-27 22:42:08 LOG5 end_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2008-Apr-27 22:42:08 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-27 22:42:08 INFO2 waittrk: Now tracking AGESVC1A_p2_044 2008-Apr-27 22:42:08 LOG4 waittrk: Current telescope position: Az = 388.56 ZA = 11.85 2008-Apr-27 22:42:08 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-27 22:42:08 LOG5 finish_task: Level: (3) ID = <10124> Status = 0 0 0 0 ok 2008-Apr-27 22:42:08 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-27 22:42:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 22:42:08 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-27 22:42:08 LOG5 end_task: Level: (3) ID = <10124> Status = 0 0 0 0 ok 2008-Apr-27 22:42:08 START begin_task: Starting task 'selecting calibration type' 2008-Apr-27 22:42:08 LOG5 begin_task: Level: (3) ID = <10127> Status = 0 0 0 0 ok 2008-Apr-27 22:42:08 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-27 22:42:08 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-27 22:42:08 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 22:42:08 START begin_task: Starting task 'waiting on setcal' 2008-Apr-27 22:42:08 LOG5 begin_task: Level: (4) ID = <10128> Status = 0 0 0 0 ok 2008-Apr-27 22:42:08 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-27 22:42:08 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 22:42:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 22:42:09 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-27 22:42:09 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-27 22:42:09 LOG5 end_task: Level: (4) ID = <10128> Status = 0 0 0 0 ok 2008-Apr-27 22:42:09 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-27 22:42:09 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 22:42:09 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-27 22:42:09 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 22:42:09 LOG5 begin_task: Level: (4) ID = <10129> Status = 0 0 0 0 ok 2008-Apr-27 22:42:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 22:42:09 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 22:42:09 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 22:42:09 LOG5 end_task: Level: (4) ID = <10129> Status = 0 0 0 0 ok 2008-Apr-27 22:42:09 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 22:42:09 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-27 22:42:09 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 22:42:09 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-27 22:42:09 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 22:42:09 LOG5 begin_task: Level: (4) ID = <10130> Status = 0 0 0 0 ok 2008-Apr-27 22:42:09 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 22:42:09 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 22:42:09 LOG5 end_task: Level: (4) ID = <10130> Status = 0 0 0 0 ok 2008-Apr-27 22:42:09 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 22:42:09 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-27 22:42:09 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-27 22:42:09 LOG5 finish_task: Level: (3) ID = <10127> Status = 0 0 0 0 ok 2008-Apr-27 22:42:09 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-27 22:42:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 22:42:09 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-27 22:42:09 LOG5 end_task: Level: (3) ID = <10127> Status = 0 0 0 0 ok 2008-Apr-27 22:42:09 LOG5 dopset_later: Calling 'dopset_later 0' 2008-Apr-27 22:42:09 INFO3 dopset_later: Setting Doppler correction now 2008-Apr-27 22:42:09 LOG5 antvel: Calling 'antvel 28.830000 11.875525 F 0' 2008-Apr-27 22:42:09 LOG2 antvel: Parameters to Doppler: Heliocentric 96129 2008 118 0.0 2008-Apr-27 22:42:09 INFO5 antvel: Computed antenna velocity: +17.35644 km/s 2008-Apr-27 22:42:09 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=17.356436877 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-27 22:42:09 INFO4 dopset_gen: New sky frequencies: 1381.163466 1381.163466 1381.163466 1381.163466 1381.163466 1381.163466 1381.163466 1381.163466 1381.163466 2008-Apr-27 22:42:09 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.163466 sky0=1381.163466 sky1=1381.163466 sky2=1381.163466 sky3=1381.163466 sky4=1381.163466 sky5=1381.163466 sky6=1381.163466 sky7=1381.163466 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-27 22:42:09 LOG2 dopset_gen: Result from 'sky2syn': 1631.163466 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-27 22:42:09 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631163466.0} 2008-Apr-27 22:42:09 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 22:42:09 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-27 22:42:09 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-27 22:42:09 INFO5 fixed_driftmap: Tracking J2000 position: RA = 12:17:32.8 Dec = +07:55:21.2 2008-Apr-27 22:42:09 LOG3 track_source: Calling 'track_source AGESVC1A_p2_044 121732.8 075521.2 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-27 22:42:09 START begin_task: Starting task 'sending tracking commands' 2008-Apr-27 22:42:09 LOG5 begin_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2008-Apr-27 22:42:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_044} INFO {Slewing to source 'AGESVC1A_p2_044' ...} 2008-Apr-27 22:42:09 INFO1 track_source: Starting to track AGESVC1A_p2_044 2008-Apr-27 22:42:10 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_044" 2008-Apr-27 22:42:10 LOG3 vw_send: To DATATAKING: set ra 121732.8 2008-Apr-27 22:42:10 LOG3 vw_send: To DATATAKING: set dec 075521.2 2008-Apr-27 22:42:10 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-27 22:42:10 LOG3 vw_send: To DATATAKING: pnt tr 121732.8 075521.2 -CJ 2008-Apr-27 22:42:10 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 22:42:10 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-27 22:42:10 LOG5 finish_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2008-Apr-27 22:42:10 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-27 22:42:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 22:42:10 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-27 22:42:10 LOG5 end_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2008-Apr-27 22:42:10 START begin_task: Starting task 'waiting on telescope' 2008-Apr-27 22:42:10 LOG5 begin_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2008-Apr-27 22:42:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-27 22:42:10 LOG3 waittrk: Start waittrk 5 2008-Apr-27 22:42:10 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-27 22:42:10 LOG5 begin_task: Level: (4) ID = <10133> Status = 0 0 0 0 ok 2008-Apr-27 22:42:10 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631163466.0} 2008-Apr-27 22:42:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 22:42:10 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_044" 2008-Apr-27 22:42:10 LOG4 got_cormsg: From DATATAKING: set ra 121732.8 2008-Apr-27 22:42:10 LOG4 got_cormsg: From DATATAKING: set dec 075521.2 2008-Apr-27 22:42:10 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-27 22:42:10 LOG4 got_cormsg: From DATATAKING: vw% 121732.8 2008-Apr-27 22:42:10 LOG4 got_cormsg: From DATATAKING: vw% 075521.2 2008-Apr-27 22:42:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 22:42:10 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-27 22:42:10 LOG4 got_cormsg: From DATATAKING: pnt tr 121732.8 075521.2 -CJ 2008-Apr-27 22:42:10 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 22:42:10 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-27 22:42:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 22:42:15 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-27 22:42:15 LOG5 end_task: Level: (4) ID = <10133> Status = 0 0 0 0 ok 2008-Apr-27 22:42:15 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-27 22:42:15 LOG5 begin_task: Level: (4) ID = <10134> Status = 0 0 0 0 ok 2008-Apr-27 22:42:17 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-27 22:42:17 LOG5 end_task: Level: (4) ID = <10134> Status = 0 0 0 0 ok 2008-Apr-27 22:42:17 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-27 22:42:17 INFO2 waittrk: Now tracking AGESVC1A_p2_044 2008-Apr-27 22:42:17 LOG4 waittrk: Current telescope position: Az = 388.63 ZA = 11.86 2008-Apr-27 22:42:17 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-27 22:42:17 LOG5 finish_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2008-Apr-27 22:42:17 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-27 22:42:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 22:42:17 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-27 22:42:17 LOG5 end_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2008-Apr-27 22:42:17 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-27 22:42:17 LOG5 begin_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2008-Apr-27 22:42:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-27 22:42:17 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-27 22:42:17 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-27 22:42:17 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-27 22:42:17 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 22:42:17 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-27 22:42:17 LOG5 begin_task: Level: (4) ID = <10136> Status = 0 0 0 0 ok 2008-Apr-27 22:42:17 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-27 22:42:17 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 22:42:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 22:42:17 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-27 22:42:17 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-27 22:42:17 LOG5 end_task: Level: (4) ID = <10136> Status = 0 0 0 0 ok 2008-Apr-27 22:42:17 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-27 22:42:17 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-27 22:42:17 LOG5 begin_task: Level: (4) ID = <10137> Status = 0 0 0 0 ok 2008-Apr-27 22:42:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-27 22:42:17 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-27 22:42:17 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-27 22:42:17 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-27 22:42:17 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-27 22:42:17 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-27 22:42:17 LOG5 begin_task: Level: (5) ID = <10138> Status = 0 0 0 0 ok 2008-Apr-27 22:42:18 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-27 22:42:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 22:42:18 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 9 dB --- beam 1: 8 6 dB 2008-Apr-27 22:42:18 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 6 dB 2008-Apr-27 22:42:18 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-27 22:42:18 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 3 3 dB 2008-Apr-27 22:42:18 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-27 22:42:18 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-27 22:42:18 LOG5 end_task: Level: (5) ID = <10138> Status = 0 0 0 0 ok 2008-Apr-27 22:42:18 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.882 1.058 ALFA beam 1: 0.881 1.069 2008-Apr-27 22:42:18 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.024 0.938 ALFA beam 3: 0.987 1.051 2008-Apr-27 22:42:18 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.947 0.974 ALFA beam 5: 1.047 0.908 2008-Apr-27 22:42:18 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.052 1.050 ALFA beam 7: 0.915 0.939 2008-Apr-27 22:42:18 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-27 22:42:18 LOG5 finish_task: Level: (4) ID = <10137> Status = 0 0 0 0 ok 2008-Apr-27 22:42:18 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-27 22:42:18 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 22:42:18 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-27 22:42:18 LOG5 end_task: Level: (4) ID = <10137> Status = 0 0 0 0 ok 2008-Apr-27 22:42:18 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-27 22:42:18 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-27 22:42:18 LOG5 finish_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2008-Apr-27 22:42:18 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-27 22:42:18 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 22:42:18 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-27 22:42:18 LOG5 end_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2008-Apr-27 22:42:18 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 ss 2008-Apr-27 22:42:18 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 ss 2008-Apr-27 22:42:18 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 ss 2008-Apr-27 22:42:18 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 ss 2008-Apr-27 22:42:18 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-27 22:42:18 START begin_task: Starting task 'WAPP calibration' 2008-Apr-27 22:42:18 LOG5 begin_task: Level: (3) ID = <10139> Status = 0 0 0 0 ok 2008-Apr-27 22:42:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-27 22:42:18 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-27 22:42:18 START begin_task: Starting task 'selecting calibration type' 2008-Apr-27 22:42:18 LOG5 begin_task: Level: (4) ID = <10140> Status = 0 0 0 0 ok 2008-Apr-27 22:42:18 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-27 22:42:18 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-27 22:42:18 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 22:42:18 START begin_task: Starting task 'waiting on setcal' 2008-Apr-27 22:42:18 LOG5 begin_task: Level: (5) ID = <10141> Status = 0 0 0 0 ok 2008-Apr-27 22:42:18 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 ss' 2008-Apr-27 22:42:18 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-27 22:42:18 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 22:42:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 22:42:19 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-27 22:42:19 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-27 22:42:19 LOG5 end_task: Level: (5) ID = <10141> Status = 0 0 0 0 ok 2008-Apr-27 22:42:19 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-27 22:42:19 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 22:42:19 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-27 22:42:19 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 22:42:19 LOG5 begin_task: Level: (5) ID = <10142> Status = 0 0 0 0 ok 2008-Apr-27 22:42:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 22:42:19 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 22:42:19 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 22:42:19 LOG5 end_task: Level: (5) ID = <10142> Status = 0 0 0 0 ok 2008-Apr-27 22:42:19 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 22:42:19 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-27 22:42:19 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 22:42:19 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-27 22:42:19 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 22:42:19 LOG5 begin_task: Level: (5) ID = <10143> Status = 0 0 0 0 ok 2008-Apr-27 22:42:19 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 22:42:19 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 22:42:19 LOG5 end_task: Level: (5) ID = <10143> Status = 0 0 0 0 ok 2008-Apr-27 22:42:19 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 22:42:19 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-27 22:42:19 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-27 22:42:19 LOG5 finish_task: Level: (4) ID = <10140> Status = 0 0 0 0 ok 2008-Apr-27 22:42:19 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-27 22:42:19 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 22:42:19 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-27 22:42:19 LOG5 end_task: Level: (4) ID = <10140> Status = 0 0 0 0 ok 2008-Apr-27 22:42:19 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-27 22:42:19 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-27 22:42:19 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-27 22:42:19 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-27 22:42:19 LOG5 begin_task: Level: (4) ID = <10144> Status = 0 0 0 0 ok 2008-Apr-27 22:42:19 NOTE WAPPDATA-new_file: New FITS file: wapp.20080427.a2048.0008.fits 2008-Apr-27 22:42:19 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-27 22:42:19 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080427.a2048.0008.fits} 2008-Apr-27 22:42:19 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-27 22:42:19 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-27 22:42:19 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-27 22:42:19 LOG5 end_task: Level: (4) ID = <10144> Status = 0 0 0 0 ok 2008-Apr-27 22:42:19 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-27 22:42:19 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-27 22:42:19 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-27 22:42:19 LOG5 begin_task: Level: (4) ID = <10145> Status = 0 0 0 0 ok 2008-Apr-27 22:42:19 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-27 22:42:19 LOG5 log_alfabeam: Parameters: 12.292444444444445 7.9225555555555554 12.684768 2008.3256565454915 -5.000101 2008-Apr-27 22:42:19 LOG4 log_alfabeam: ALFABEAM 0 12.292444444444444 7.922555555555551 2008-Apr-27 22:42:19 LOG4 log_alfabeam: ALFABEAM 1 12.292072860028624 8.024207480239559 2008-Apr-27 22:42:19 LOG4 log_alfabeam: ALFABEAM 2 12.286730728682347 7.956891713267340 2008-Apr-27 22:42:19 LOG4 log_alfabeam: ALFABEAM 3 12.287106646148880 7.855026785190131 2008-Apr-27 22:42:19 LOG4 log_alfabeam: ALFABEAM 4 12.292868237562391 7.820753039614514 2008-Apr-27 22:42:19 LOG4 log_alfabeam: ALFABEAM 5 12.298170310150947 7.888875899967520 2008-Apr-27 22:42:19 LOG4 log_alfabeam: ALFABEAM 6 12.297750936166791 7.990465985026104 2008-Apr-27 22:42:19 INFO2 take_spectra: Starting WAPP scan: 811800110 2008-Apr-27 22:42:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-27 22:42:20 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-27 22:42:20 LOG5 begin_task: Level: (5) ID = <10146> Status = 0 0 0 0 ok 2008-Apr-27 22:42:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 22:42:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9741.00 2008-Apr-27 22:42:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.163466 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 22:42:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.163466 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 22:42:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.163466 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 22:42:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.163466 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-27 22:42:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.163466 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 22:42:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.163466 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-27 22:42:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.163466 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-27 22:42:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.163466 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-27 22:42:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.163466 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-27 22:42:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 22:42:26 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-27 22:42:26 LOG5 end_task: Level: (5) ID = <10146> Status = 0 0 0 0 ok 2008-Apr-27 22:42:26 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-27 22:42:26 LOG5 end_task: Level: (4) ID = <10145> Status = 0 0 0 0 ok 2008-Apr-27 22:42:26 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-27 22:42:26 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-27 22:42:26 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-27 22:42:26 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-27 22:42:26 LOG5 begin_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2008-Apr-27 22:42:26 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-27 22:42:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.458 > 1.4)! 2008-Apr-27 22:42:26 LOG4 check_wapp_levels: WAPP-1 power levels: 1.239 1.437 1.192 1.448 2008-Apr-27 22:42:26 LOG4 check_wapp_levels: WAPP-2 power levels: 1.395 1.299 1.366 1.443 2008-Apr-27 22:42:26 LOG4 check_wapp_levels: WAPP-3 power levels: 1.317 1.353 1.448 1.223 2008-Apr-27 22:42:26 LOG4 check_wapp_levels: WAPP-4 power levels: 1.458 1.457 1.271 1.302 2008-Apr-27 22:42:26 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-27 22:42:26 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-27 22:42:26 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-27 22:42:26 LOG5 end_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2008-Apr-27 22:42:26 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-27 22:42:26 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-27 22:42:26 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-27 22:42:26 LOG5 begin_task: Level: (4) ID = <10148> Status = 0 0 0 0 ok 2008-Apr-27 22:42:26 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-27 22:42:26 LOG5 log_alfabeam: Parameters: 12.292444444444445 7.9225555555555554 12.686718 2008.3256567673081 -5.000101 2008-Apr-27 22:42:26 LOG4 log_alfabeam: ALFABEAM 0 12.292444444444447 7.922555555555551 2008-Apr-27 22:42:26 LOG4 log_alfabeam: ALFABEAM 1 12.292086898309373 8.024218703832261 2008-Apr-27 22:42:26 LOG4 log_alfabeam: ALFABEAM 2 12.286735482849133 7.957065742239089 2008-Apr-27 22:42:26 LOG4 log_alfabeam: ALFABEAM 3 12.287097333841521 7.855189708392204 2008-Apr-27 22:42:26 LOG4 log_alfabeam: ALFABEAM 4 12.292854124275264 7.820740398949612 2008-Apr-27 22:42:26 LOG4 log_alfabeam: ALFABEAM 5 12.298165629789743 7.888700714085378 2008-Apr-27 22:42:26 LOG4 log_alfabeam: ALFABEAM 6 12.297760340750262 7.990303553757300 2008-Apr-27 22:42:26 INFO2 take_spectra: Starting WAPP scan: 811800111 2008-Apr-27 22:42:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-27 22:42:27 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-27 22:42:27 LOG5 begin_task: Level: (5) ID = <10149> Status = 0 0 0 0 ok 2008-Apr-27 22:42:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 22:42:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9748.00 2008-Apr-27 22:42:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.163466 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 22:42:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.163466 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 22:42:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.163466 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 22:42:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.163466 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-27 22:42:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.163466 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 22:42:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.163466 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-27 22:42:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.163466 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-27 22:42:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.163466 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-27 22:42:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.163466 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-27 22:42:33 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-27 22:42:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 22:42:33 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-27 22:42:33 LOG5 end_task: Level: (5) ID = <10149> Status = 0 0 0 0 ok 2008-Apr-27 22:42:33 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-27 22:42:33 LOG5 end_task: Level: (4) ID = <10148> Status = 0 0 0 0 ok 2008-Apr-27 22:42:33 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-27 22:42:33 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-27 22:42:33 LOG5 finish_task: Level: (3) ID = <10139> Status = 0 0 0 0 ok 2008-Apr-27 22:42:33 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-27 22:42:33 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 22:42:33 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-27 22:42:33 LOG5 end_task: Level: (3) ID = <10139> Status = 0 0 0 0 ok 2008-Apr-27 22:42:33 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-27 22:42:33 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 28.83 and ZA = 11.88 2008-Apr-27 22:42:33 LOG3 track_source: Calling 'track_source AGESVC1A_p2_044 28.83 11.8755249401 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-27 22:42:33 START begin_task: Starting task 'sending tracking commands' 2008-Apr-27 22:42:33 LOG5 begin_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2008-Apr-27 22:42:33 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_044} INFO {Slewing to source 'AGESVC1A_p2_044' ...} 2008-Apr-27 22:42:33 INFO1 track_source: Starting to track AGESVC1A_p2_044 2008-Apr-27 22:42:33 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_044" 2008-Apr-27 22:42:33 LOG3 vw_send: To DATATAKING: set ra 28.83 2008-Apr-27 22:42:33 LOG3 vw_send: To DATATAKING: set dec 11.8755249401 2008-Apr-27 22:42:33 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-27 22:42:33 LOG3 vw_send: To DATATAKING: pnt tr 28.83 11.8755249401 -CF 2008-Apr-27 22:42:33 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 22:42:33 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-27 22:42:33 LOG5 finish_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2008-Apr-27 22:42:33 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-27 22:42:33 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 22:42:34 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-27 22:42:34 LOG5 end_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2008-Apr-27 22:42:34 LOG1 fixed_driftmap: Parameters: HA = +00:22:59.9 Start = 12:32:27.0 LST = 12:41:19.2 diff = -532.2 secs 2008-Apr-27 22:42:34 WARNING fixed_driftmap: WARNING RA has already passed --- starting anyway! 2008-Apr-27 22:42:34 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-27 22:42:34 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-27 22:42:34 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-27 22:42:34 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-27 22:42:34 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-27 22:42:34 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-27 22:42:34 LOG5 begin_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2008-Apr-27 22:42:34 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-27 22:42:34 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-27 22:42:34 INFO2 take_spectra: Starting WAPP scan: 811800112 2008-Apr-27 22:42:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-27 22:42:34 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-27 22:42:34 LOG5 begin_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2008-Apr-27 22:42:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 22:42:34 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_044" 2008-Apr-27 22:42:34 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.885 and 1.070 2008-Apr-27 22:42:34 LOG4 got_cormsg: From DATATAKING: set ra 28.83 2008-Apr-27 22:42:34 LOG4 got_cormsg: From DATATAKING: set dec 11.8755249401 2008-Apr-27 22:42:34 LOG4 got_cormsg: From DATATAKING: vw% 28.83 2008-Apr-27 22:42:34 LOG4 got_cormsg: From DATATAKING: vw% 11.8755249401 2008-Apr-27 22:42:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 22:42:34 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-27 22:42:34 LOG4 got_cormsg: From DATATAKING: pnt tr 28.83 11.8755249401 -CF 2008-Apr-27 22:42:34 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 22:42:34 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-27 22:42:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 22:42:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9755.00 2008-Apr-27 22:42:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.163466 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 22:42:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.163466 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 22:42:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.163466 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 22:42:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.163466 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-27 22:42:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.163466 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 22:42:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.163466 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-27 22:42:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.163466 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-27 22:42:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.163466 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-27 22:42:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.163466 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-27 22:42:38 WARNING WAPP=1+2+3+4-start_spectra: WARNING observing when not on source 2008-Apr-27 22:42:46 NOTE WAPP=1+2+3+4-start_spectra: Observing now on source 2008-Apr-27 23:02:35 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 23:02:35 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-27 23:02:35 LOG5 end_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2008-Apr-27 23:02:35 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-27 23:02:35 LOG5 end_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2008-Apr-27 23:02:35 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-27 23:02:35 LOG5 finish_task: Level: (2) ID = <10120> Status = 0 0 0 0 ok 2008-Apr-27 23:02:35 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-27 23:02:35 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-27 23:02:35 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-27 23:02:36 LOG5 end_task: Level: (2) ID = <10120> Status = 0 0 0 0 ok 2008-Apr-27 23:02:36 COMMAND run_command_line: EXECUTING command 47: 'FIXEDDRIFT az=48.22 alfaangle=-22.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_046 ra=120900.00 dec=75230.00' 2008-Apr-27 23:02:36 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-27 23:02:36 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-27 23:02:36 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 48.22 -22.1 hcorcal 5 tracking no first 1 AGESVC1A_p2_046 120900.00 75230.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-27 23:02:36 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-27 23:02:36 LOG5 begin_task: Level: (2) ID = <10153> Status = 0 0 0 0 ok 2008-Apr-27 23:02:36 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGESVC1A_p2_044' 2008-Apr-27 23:02:36 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-27 23:02:36 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1A_p2_046} 2008-Apr-27 23:02:36 INFO3 fixed_driftmap: Sending telescope to Az = 48.22 and ZA = 15.36 2008-Apr-27 23:02:36 LOG3 track_source: Calling 'track_source AGESVC1A_p2_046 48.22 15.3566219667 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-27 23:02:36 START begin_task: Starting task 'sending tracking commands' 2008-Apr-27 23:02:36 LOG5 begin_task: Level: (3) ID = <10154> Status = 0 0 0 0 ok 2008-Apr-27 23:02:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_046} INFO {Slewing to source 'AGESVC1A_p2_046' ...} 2008-Apr-27 23:02:36 INFO1 track_source: Starting to track AGESVC1A_p2_046 2008-Apr-27 23:02:36 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_046" 2008-Apr-27 23:02:36 LOG3 vw_send: To DATATAKING: set ra 48.22 2008-Apr-27 23:02:36 LOG3 vw_send: To DATATAKING: set dec 15.3566219667 2008-Apr-27 23:02:36 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-27 23:02:36 LOG3 vw_send: To DATATAKING: pnt tr 48.22 15.3566219667 -CF 2008-Apr-27 23:02:36 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 23:02:36 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-27 23:02:36 LOG5 finish_task: Level: (3) ID = <10154> Status = 0 0 0 0 ok 2008-Apr-27 23:02:36 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-27 23:02:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 23:02:36 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-27 23:02:36 LOG5 end_task: Level: (3) ID = <10154> Status = 0 0 0 0 ok 2008-Apr-27 23:02:36 START begin_task: Starting task 'rotate ALFA to -22.1 degrees' 2008-Apr-27 23:02:36 LOG5 begin_task: Level: (3) ID = <10155> Status = 0 0 0 0 ok 2008-Apr-27 23:02:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -22.1 degrees ...} 2008-Apr-27 23:02:36 INFO2 rotate_alfa: ALFA commanded to -22.1 degrees 2008-Apr-27 23:02:36 LOG3 sock_errsend: To ALFAMOTOR: POSITION -22.1 REPLY 2008-Apr-27 23:02:36 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-27 23:02:36 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-27 23:02:36 LOG5 begin_task: Level: (4) ID = <10156> Status = 0 0 0 0 ok 2008-Apr-27 23:02:36 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_046" 2008-Apr-27 23:02:36 LOG4 got_cormsg: From DATATAKING: set ra 48.22 2008-Apr-27 23:02:37 LOG4 got_cormsg: From DATATAKING: set dec 15.3566219667 2008-Apr-27 23:02:37 LOG4 got_cormsg: From DATATAKING: vw% 48.22 2008-Apr-27 23:02:37 LOG4 got_cormsg: From DATATAKING: vw% 15.3566219667 2008-Apr-27 23:02:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 23:02:37 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-27 23:02:37 LOG4 got_cormsg: From DATATAKING: pnt tr 48.22 15.3566219667 -CF 2008-Apr-27 23:02:37 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 23:02:37 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-27 23:02:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 23:02:47 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-27 23:02:47 INFO3 alfa_motor: ALFA rotator in-position -22.10 degrees 2008-Apr-27 23:02:47 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-27 23:02:47 LOG5 end_task: Level: (4) ID = <10156> Status = 0 0 0 0 ok 2008-Apr-27 23:02:47 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-27 23:02:47 STOP finish_task: Finishing task 'rotate ALFA to -22.1 degrees' 2008-Apr-27 23:02:47 LOG5 finish_task: Level: (3) ID = <10155> Status = 0 0 0 0 ok 2008-Apr-27 23:02:47 INFO2 finish_task: DONE finished configuration: rotating ALFA to -22.1 degrees 2008-Apr-27 23:02:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 23:02:47 STOP end_task: Finishing task 'rotate ALFA to -22.1 degrees' with status 'OK' 2008-Apr-27 23:02:47 LOG5 end_task: Level: (3) ID = <10155> Status = 0 0 0 0 ok 2008-Apr-27 23:02:47 START begin_task: Starting task 'waiting on telescope' 2008-Apr-27 23:02:47 LOG5 begin_task: Level: (3) ID = <10157> Status = 0 0 0 0 ok 2008-Apr-27 23:02:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-27 23:02:47 LOG3 waittrk: Start waittrk 5 2008-Apr-27 23:02:47 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-27 23:02:47 LOG5 begin_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2008-Apr-27 23:02:52 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-27 23:02:52 LOG5 end_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2008-Apr-27 23:02:53 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-27 23:02:53 LOG5 begin_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2008-Apr-27 23:04:10 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-27 23:04:10 LOG5 end_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2008-Apr-27 23:04:10 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-27 23:04:10 INFO2 waittrk: Now tracking AGESVC1A_p2_046 2008-Apr-27 23:04:10 LOG4 waittrk: Current telescope position: Az = 408.00 ZA = 15.34 2008-Apr-27 23:04:10 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-27 23:04:10 LOG5 finish_task: Level: (3) ID = <10157> Status = 0 0 0 0 ok 2008-Apr-27 23:04:10 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-27 23:04:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 23:04:10 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-27 23:04:10 LOG5 end_task: Level: (3) ID = <10157> Status = 0 0 0 0 ok 2008-Apr-27 23:04:10 START begin_task: Starting task 'selecting calibration type' 2008-Apr-27 23:04:10 LOG5 begin_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2008-Apr-27 23:04:10 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-27 23:04:11 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-27 23:04:11 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 23:04:11 START begin_task: Starting task 'waiting on setcal' 2008-Apr-27 23:04:11 LOG5 begin_task: Level: (4) ID = <10161> Status = 0 0 0 0 ok 2008-Apr-27 23:04:11 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-27 23:04:11 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 23:04:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 23:04:12 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-27 23:04:12 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-27 23:04:12 LOG5 end_task: Level: (4) ID = <10161> Status = 0 0 0 0 ok 2008-Apr-27 23:04:12 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-27 23:04:12 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 23:04:12 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-27 23:04:12 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 23:04:12 LOG5 begin_task: Level: (4) ID = <10162> Status = 0 0 0 0 ok 2008-Apr-27 23:04:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 23:04:12 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 23:04:12 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 23:04:12 LOG5 end_task: Level: (4) ID = <10162> Status = 0 0 0 0 ok 2008-Apr-27 23:04:12 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 23:04:12 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-27 23:04:12 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 23:04:12 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-27 23:04:12 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 23:04:12 LOG5 begin_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2008-Apr-27 23:04:12 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 23:04:12 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 23:04:12 LOG5 end_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2008-Apr-27 23:04:12 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 23:04:12 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-27 23:04:12 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-27 23:04:12 LOG5 finish_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2008-Apr-27 23:04:12 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-27 23:04:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 23:04:12 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-27 23:04:12 LOG5 end_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2008-Apr-27 23:04:12 LOG5 dopset_later: Calling 'dopset_later 0' 2008-Apr-27 23:04:12 INFO3 dopset_later: Setting Doppler correction now 2008-Apr-27 23:04:12 LOG5 antvel: Calling 'antvel 48.220000 15.356622 F 0' 2008-Apr-27 23:04:12 LOG2 antvel: Parameters to Doppler: Heliocentric 97451 2008 118 0.0 2008-Apr-27 23:04:12 INFO5 antvel: Computed antenna velocity: +17.48903 km/s 2008-Apr-27 23:04:12 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=17.489028963399999 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-27 23:04:12 INFO4 dopset_gen: New sky frequencies: 1381.162855 1381.162855 1381.162855 1381.162855 1381.162855 1381.162855 1381.162855 1381.162855 1381.162855 2008-Apr-27 23:04:12 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.162855 sky0=1381.162855 sky1=1381.162855 sky2=1381.162855 sky3=1381.162855 sky4=1381.162855 sky5=1381.162855 sky6=1381.162855 sky7=1381.162855 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-27 23:04:12 LOG2 dopset_gen: Result from 'sky2syn': 1631.162855 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-27 23:04:12 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631162855.0} 2008-Apr-27 23:04:12 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 23:04:12 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-27 23:04:12 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-27 23:04:12 INFO5 fixed_driftmap: Tracking J2000 position: RA = 12:16:38.7 Dec = +07:52:21.2 2008-Apr-27 23:04:12 LOG3 track_source: Calling 'track_source AGESVC1A_p2_046 121638.7 075221.2 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-27 23:04:12 START begin_task: Starting task 'sending tracking commands' 2008-Apr-27 23:04:12 LOG5 begin_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2008-Apr-27 23:04:12 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_046} INFO {Slewing to source 'AGESVC1A_p2_046' ...} 2008-Apr-27 23:04:12 INFO1 track_source: Starting to track AGESVC1A_p2_046 2008-Apr-27 23:04:12 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_046" 2008-Apr-27 23:04:12 LOG3 vw_send: To DATATAKING: set ra 121638.7 2008-Apr-27 23:04:12 LOG3 vw_send: To DATATAKING: set dec 075221.2 2008-Apr-27 23:04:12 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-27 23:04:12 LOG3 vw_send: To DATATAKING: pnt tr 121638.7 075221.2 -CJ 2008-Apr-27 23:04:12 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 23:04:12 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-27 23:04:12 LOG5 finish_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2008-Apr-27 23:04:12 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-27 23:04:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 23:04:12 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-27 23:04:12 LOG5 end_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2008-Apr-27 23:04:12 START begin_task: Starting task 'waiting on telescope' 2008-Apr-27 23:04:12 LOG5 begin_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2008-Apr-27 23:04:12 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-27 23:04:12 LOG3 waittrk: Start waittrk 5 2008-Apr-27 23:04:12 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-27 23:04:12 LOG5 begin_task: Level: (4) ID = <10166> Status = 0 0 0 0 ok 2008-Apr-27 23:04:12 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631162855.0} 2008-Apr-27 23:04:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 23:04:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 23:04:12 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_046" 2008-Apr-27 23:04:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 23:04:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 23:04:12 LOG4 got_cormsg: From DATATAKING: set ra 121638.7 2008-Apr-27 23:04:12 LOG4 got_cormsg: From DATATAKING: set dec 075221.2 2008-Apr-27 23:04:12 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-27 23:04:12 LOG4 got_cormsg: From DATATAKING: pnt tr 121638.7 075221.2 -CJ 2008-Apr-27 23:04:12 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 23:04:12 LOG4 got_cormsg: From DATATAKING: 121638.7 2008-Apr-27 23:04:12 LOG4 got_cormsg: From DATATAKING: vw% 075221.2 2008-Apr-27 23:04:12 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2008-Apr-27 23:04:17 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-27 23:04:17 LOG5 end_task: Level: (4) ID = <10166> Status = 0 0 0 0 ok 2008-Apr-27 23:04:17 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-27 23:04:17 LOG5 begin_task: Level: (4) ID = <10167> Status = 0 0 0 0 ok 2008-Apr-27 23:04:19 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-27 23:04:19 LOG5 end_task: Level: (4) ID = <10167> Status = 0 0 0 0 ok 2008-Apr-27 23:04:19 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-27 23:04:19 INFO2 waittrk: Now tracking AGESVC1A_p2_046 2008-Apr-27 23:04:20 LOG4 waittrk: Current telescope position: Az = 408.03 ZA = 15.36 2008-Apr-27 23:04:20 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-27 23:04:20 LOG5 finish_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2008-Apr-27 23:04:20 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-27 23:04:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 23:04:20 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-27 23:04:20 LOG5 end_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2008-Apr-27 23:04:20 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-27 23:04:20 LOG5 begin_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2008-Apr-27 23:04:20 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-27 23:04:20 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-27 23:04:20 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-27 23:04:20 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-27 23:04:20 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 23:04:20 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-27 23:04:20 LOG5 begin_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2008-Apr-27 23:04:20 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-27 23:04:20 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 23:04:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 23:04:20 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-27 23:04:20 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-27 23:04:20 LOG5 end_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2008-Apr-27 23:04:20 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-27 23:04:20 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-27 23:04:20 LOG5 begin_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2008-Apr-27 23:04:20 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-27 23:04:20 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-27 23:04:20 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-27 23:04:20 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-27 23:04:20 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-27 23:04:20 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-27 23:04:20 LOG5 begin_task: Level: (5) ID = <10171> Status = 0 0 0 0 ok 2008-Apr-27 23:04:20 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-27 23:04:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 23:04:20 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 9 dB --- beam 1: 7 6 dB 2008-Apr-27 23:04:20 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 6 dB 2008-Apr-27 23:04:20 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-27 23:04:20 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 3 3 dB 2008-Apr-27 23:04:20 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-27 23:04:20 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-27 23:04:20 LOG5 end_task: Level: (5) ID = <10171> Status = 0 0 0 0 ok 2008-Apr-27 23:04:20 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.930 1.076 ALFA beam 1: 1.139 1.064 2008-Apr-27 23:04:21 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.051 0.969 ALFA beam 3: 1.042 1.092 2008-Apr-27 23:04:21 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.964 1.001 ALFA beam 5: 1.073 0.925 2008-Apr-27 23:04:21 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.094 1.078 ALFA beam 7: 0.953 0.963 2008-Apr-27 23:04:21 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-27 23:04:21 LOG5 finish_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2008-Apr-27 23:04:21 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-27 23:04:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 23:04:21 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-27 23:04:21 LOG5 end_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2008-Apr-27 23:04:21 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-27 23:04:21 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-27 23:04:21 LOG5 finish_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2008-Apr-27 23:04:21 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-27 23:04:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 23:04:21 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-27 23:04:21 LOG5 end_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2008-Apr-27 23:04:21 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 ss 2008-Apr-27 23:04:21 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 ss 2008-Apr-27 23:04:21 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 ss 2008-Apr-27 23:04:21 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 ss 2008-Apr-27 23:04:21 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-27 23:04:21 START begin_task: Starting task 'WAPP calibration' 2008-Apr-27 23:04:21 LOG5 begin_task: Level: (3) ID = <10172> Status = 0 0 0 0 ok 2008-Apr-27 23:04:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-27 23:04:21 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-27 23:04:21 START begin_task: Starting task 'selecting calibration type' 2008-Apr-27 23:04:21 LOG5 begin_task: Level: (4) ID = <10173> Status = 0 0 0 0 ok 2008-Apr-27 23:04:21 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-27 23:04:21 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-27 23:04:21 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 23:04:21 START begin_task: Starting task 'waiting on setcal' 2008-Apr-27 23:04:21 LOG5 begin_task: Level: (5) ID = <10174> Status = 0 0 0 0 ok 2008-Apr-27 23:04:21 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 ss' 2008-Apr-27 23:04:21 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-27 23:04:21 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 23:04:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 23:04:21 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-27 23:04:21 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-27 23:04:21 LOG5 end_task: Level: (5) ID = <10174> Status = 0 0 0 0 ok 2008-Apr-27 23:04:21 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-27 23:04:21 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 23:04:21 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-27 23:04:21 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 23:04:21 LOG5 begin_task: Level: (5) ID = <10175> Status = 0 0 0 0 ok 2008-Apr-27 23:04:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 23:04:21 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 23:04:21 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 23:04:21 LOG5 end_task: Level: (5) ID = <10175> Status = 0 0 0 0 ok 2008-Apr-27 23:04:21 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 23:04:21 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-27 23:04:21 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 23:04:21 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-27 23:04:21 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 23:04:21 LOG5 begin_task: Level: (5) ID = <10176> Status = 0 0 0 0 ok 2008-Apr-27 23:04:21 NOTE WAPPDATA-new_file: New FITS file: wapp.20080427.a2048.0009.fits 2008-Apr-27 23:04:21 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 23:04:21 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 23:04:21 LOG5 end_task: Level: (5) ID = <10176> Status = 0 0 0 0 ok 2008-Apr-27 23:04:21 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 23:04:21 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-27 23:04:21 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-27 23:04:21 LOG5 finish_task: Level: (4) ID = <10173> Status = 0 0 0 0 ok 2008-Apr-27 23:04:21 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-27 23:04:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 23:04:21 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-27 23:04:21 LOG5 end_task: Level: (4) ID = <10173> Status = 0 0 0 0 ok 2008-Apr-27 23:04:21 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-27 23:04:22 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-27 23:04:22 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-27 23:04:22 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-27 23:04:22 LOG5 begin_task: Level: (4) ID = <10177> Status = 0 0 0 0 ok 2008-Apr-27 23:04:22 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080427.a2048.0009.fits} 2008-Apr-27 23:04:22 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-27 23:04:22 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-27 23:04:22 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-27 23:04:22 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-27 23:04:22 LOG5 end_task: Level: (4) ID = <10177> Status = 0 0 0 0 ok 2008-Apr-27 23:04:22 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-27 23:04:22 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-27 23:04:22 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-27 23:04:22 LOG5 begin_task: Level: (4) ID = <10178> Status = 0 0 0 0 ok 2008-Apr-27 23:04:22 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-27 23:04:22 LOG5 log_alfabeam: Parameters: 12.277416666666667 7.8725555555555555 13.052996 2008.3256984371435 -22.100021 2008-Apr-27 23:04:22 LOG4 log_alfabeam: ALFABEAM 0 12.277416666666671 7.872555555555562 2008-Apr-27 23:04:22 LOG4 log_alfabeam: ALFABEAM 1 12.277201005480507 7.969837720265494 2008-Apr-27 23:04:22 LOG4 log_alfabeam: ALFABEAM 2 12.271502130394541 7.905396292239856 2008-Apr-27 23:04:22 LOG4 log_alfabeam: ALFABEAM 3 12.271736551396454 7.807765365551791 2008-Apr-27 23:04:22 LOG4 log_alfabeam: ALFABEAM 4 12.277676320860227 7.775074980846554 2008-Apr-27 23:04:22 LOG4 log_alfabeam: ALFABEAM 5 12.283331899272245 7.840322823546093 2008-Apr-27 23:04:22 LOG4 log_alfabeam: ALFABEAM 6 12.283091117681955 7.937456085459285 2008-Apr-27 23:04:22 INFO2 take_spectra: Starting WAPP scan: 811800113 2008-Apr-27 23:04:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-27 23:04:22 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-27 23:04:22 LOG5 begin_task: Level: (5) ID = <10179> Status = 0 0 0 0 ok 2008-Apr-27 23:04:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 23:04:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11063.00 2008-Apr-27 23:04:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.162855 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 23:04:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.162855 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 23:04:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.162855 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 23:04:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.162855 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-27 23:04:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.162855 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 23:04:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.162855 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-27 23:04:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.162855 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-27 23:04:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.162855 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-27 23:04:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.162855 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-27 23:04:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 23:04:28 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-27 23:04:28 LOG5 end_task: Level: (5) ID = <10179> Status = 0 0 0 0 ok 2008-Apr-27 23:04:28 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-27 23:04:28 LOG5 end_task: Level: (4) ID = <10178> Status = 0 0 0 0 ok 2008-Apr-27 23:04:28 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-27 23:04:28 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-27 23:04:28 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-27 23:04:28 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-27 23:04:28 LOG5 begin_task: Level: (4) ID = <10180> Status = 0 0 0 0 ok 2008-Apr-27 23:04:28 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-27 23:04:28 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-27 23:04:28 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-27 23:04:28 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-27 23:04:28 LOG5 end_task: Level: (4) ID = <10180> Status = 0 0 0 0 ok 2008-Apr-27 23:04:28 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-27 23:04:28 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-27 23:04:28 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-27 23:04:28 LOG5 begin_task: Level: (4) ID = <10181> Status = 0 0 0 0 ok 2008-Apr-27 23:04:28 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-27 23:04:28 LOG5 log_alfabeam: Parameters: 12.277416666666667 7.8725555555555555 13.054945 2008.3256986589602 -22.100021 2008-Apr-27 23:04:28 LOG4 log_alfabeam: ALFABEAM 0 12.277416666666671 7.872555555555555 2008-Apr-27 23:04:28 LOG4 log_alfabeam: ALFABEAM 1 12.277208920168507 7.969841679191838 2008-Apr-27 23:04:28 LOG4 log_alfabeam: ALFABEAM 2 12.271504814557588 7.905502452841993 2008-Apr-27 23:04:28 LOG4 log_alfabeam: ALFABEAM 3 12.271731270387125 7.807867724671346 2008-Apr-27 23:04:28 LOG4 log_alfabeam: ALFABEAM 4 12.277668331371633 7.775070510377671 2008-Apr-27 23:04:28 LOG4 log_alfabeam: ALFABEAM 5 12.283329261284493 7.840215764474142 2008-Apr-27 23:04:28 LOG4 log_alfabeam: ALFABEAM 6 12.283096418457069 7.937353647990789 2008-Apr-27 23:04:28 INFO2 take_spectra: Starting WAPP scan: 811800114 2008-Apr-27 23:04:29 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-27 23:04:29 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-27 23:04:29 LOG5 begin_task: Level: (5) ID = <10182> Status = 0 0 0 0 ok 2008-Apr-27 23:04:29 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 23:04:29 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11070.00 2008-Apr-27 23:04:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.535 > 1.4)! 2008-Apr-27 23:04:34 LOG4 check_wapp_levels: WAPP-1 power levels: 1.264 1.448 1.535 1.442 2008-Apr-27 23:04:34 LOG4 check_wapp_levels: WAPP-2 power levels: 1.418 1.324 1.421 1.481 2008-Apr-27 23:04:34 LOG4 check_wapp_levels: WAPP-3 power levels: 1.328 1.381 1.470 1.232 2008-Apr-27 23:04:34 LOG4 check_wapp_levels: WAPP-4 power levels: 1.495 1.482 1.305 1.322 2008-Apr-27 23:04:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.162855 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 23:04:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.162855 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 23:04:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.162855 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 23:04:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.162855 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-27 23:04:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.162855 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 23:04:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.162855 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-27 23:04:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.162855 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-27 23:04:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.162855 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-27 23:04:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.162855 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-27 23:04:35 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-27 23:04:35 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 23:04:35 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-27 23:04:35 LOG5 end_task: Level: (5) ID = <10182> Status = 0 0 0 0 ok 2008-Apr-27 23:04:35 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-27 23:04:35 LOG5 end_task: Level: (4) ID = <10181> Status = 0 0 0 0 ok 2008-Apr-27 23:04:35 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-27 23:04:35 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-27 23:04:35 LOG5 finish_task: Level: (3) ID = <10172> Status = 0 0 0 0 ok 2008-Apr-27 23:04:35 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-27 23:04:35 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 23:04:35 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-27 23:04:35 LOG5 end_task: Level: (3) ID = <10172> Status = 0 0 0 0 ok 2008-Apr-27 23:04:35 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-27 23:04:35 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 48.22 and ZA = 15.36 2008-Apr-27 23:04:35 LOG3 track_source: Calling 'track_source AGESVC1A_p2_046 48.22 15.3566219667 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-27 23:04:35 START begin_task: Starting task 'sending tracking commands' 2008-Apr-27 23:04:35 LOG5 begin_task: Level: (3) ID = <10183> Status = 0 0 0 0 ok 2008-Apr-27 23:04:35 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_046} INFO {Slewing to source 'AGESVC1A_p2_046' ...} 2008-Apr-27 23:04:35 INFO1 track_source: Starting to track AGESVC1A_p2_046 2008-Apr-27 23:04:35 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_046" 2008-Apr-27 23:04:35 LOG3 vw_send: To DATATAKING: set ra 48.22 2008-Apr-27 23:04:35 LOG3 vw_send: To DATATAKING: set dec 15.3566219667 2008-Apr-27 23:04:35 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-27 23:04:35 LOG3 vw_send: To DATATAKING: pnt tr 48.22 15.3566219667 -CF 2008-Apr-27 23:04:35 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 23:04:35 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-27 23:04:35 LOG5 finish_task: Level: (3) ID = <10183> Status = 0 0 0 0 ok 2008-Apr-27 23:04:35 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-27 23:04:35 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 23:04:36 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-27 23:04:36 LOG5 end_task: Level: (3) ID = <10183> Status = 0 0 0 0 ok 2008-Apr-27 23:04:36 LOG1 fixed_driftmap: Parameters: HA = +00:45:59.6 Start = 12:55:26.8 LST = 13:03:24.8 diff = -478.0 secs 2008-Apr-27 23:04:36 WARNING fixed_driftmap: WARNING RA has already passed --- starting anyway! 2008-Apr-27 23:04:36 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-27 23:04:36 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-27 23:04:36 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-27 23:04:36 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-27 23:04:36 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-27 23:04:36 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-27 23:04:36 LOG5 begin_task: Level: (3) ID = <10184> Status = 0 0 0 0 ok 2008-Apr-27 23:04:36 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-27 23:04:36 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-27 23:04:36 INFO2 take_spectra: Starting WAPP scan: 811800115 2008-Apr-27 23:04:36 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-27 23:04:36 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-27 23:04:36 LOG5 begin_task: Level: (4) ID = <10185> Status = 0 0 0 0 ok 2008-Apr-27 23:04:36 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 23:04:36 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_046" 2008-Apr-27 23:04:36 LOG4 got_cormsg: From DATATAKING: set ra 48.22 2008-Apr-27 23:04:36 LOG4 got_cormsg: From DATATAKING: set dec 15.3566219667 2008-Apr-27 23:04:36 LOG4 got_cormsg: From DATATAKING: vw% 48.22 2008-Apr-27 23:04:36 LOG4 got_cormsg: From DATATAKING: vw% 15.3566219667 2008-Apr-27 23:04:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 23:04:36 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-27 23:04:36 LOG4 got_cormsg: From DATATAKING: pnt tr 48.22 15.3566219667 -CF 2008-Apr-27 23:04:36 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 23:04:36 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-27 23:04:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 23:04:36 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11077.00 2008-Apr-27 23:04:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.162855 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 23:04:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.162855 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 23:04:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.162855 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 23:04:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.162855 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-27 23:04:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.162855 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 23:04:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.162855 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-27 23:04:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.162855 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-27 23:04:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.162855 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-27 23:04:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.162855 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-27 23:04:40 WARNING WAPP=1+2+3+4-start_spectra: WARNING observing when not on source 2008-Apr-27 23:04:41 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.924 and 1.143 2008-Apr-27 23:04:47 NOTE WAPP=1+2+3+4-start_spectra: Observing now on source 2008-Apr-27 23:11:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.338 < 0.8)! 2008-Apr-27 23:11:46 LOG4 check_wapp_levels: WAPP-1 power levels: 0.937 0.338 1.161 1.082 2008-Apr-27 23:11:46 LOG4 check_wapp_levels: WAPP-2 power levels: 1.052 0.972 1.053 1.102 2008-Apr-27 23:11:46 LOG4 check_wapp_levels: WAPP-3 power levels: 0.978 1.005 1.075 0.929 2008-Apr-27 23:11:46 LOG4 check_wapp_levels: WAPP-4 power levels: 1.094 1.079 0.953 0.963 2008-Apr-27 23:11:48 INFO5 check_wapp_levels: WAPP power levels are between 0.169 and 1.191 (still bad) 2008-Apr-27 23:11:50 INFO5 check_wapp_levels: WAPP power levels are between 0.189 and 1.193 (still bad) 2008-Apr-27 23:11:52 INFO5 check_wapp_levels: WAPP power levels are between 0.153 and 1.197 (still bad) 2008-Apr-27 23:11:54 INFO5 check_wapp_levels: WAPP power levels are between 0.149 and 1.197 (still bad) 2008-Apr-27 23:11:56 INFO5 check_wapp_levels: WAPP power levels are between 0.150 and 1.200 (still bad) 2008-Apr-27 23:11:58 INFO5 check_wapp_levels: WAPP power levels are between 0.138 and 1.199 (still bad) 2008-Apr-27 23:12:00 INFO5 check_wapp_levels: WAPP power levels are between 0.130 and 1.196 (still bad) 2008-Apr-27 23:12:02 INFO5 check_wapp_levels: WAPP power levels are between 0.155 and 1.196 (still bad) 2008-Apr-27 23:12:04 INFO5 check_wapp_levels: WAPP power levels are between 0.139 and 1.197 (still bad) 2008-Apr-27 23:12:06 INFO5 check_wapp_levels: WAPP power levels are between 0.141 and 1.196 (still bad) 2008-Apr-27 23:12:08 INFO5 check_wapp_levels: WAPP power levels are between 0.124 and 1.196 (still bad) 2008-Apr-27 23:12:10 INFO5 check_wapp_levels: WAPP power levels are between 0.123 and 1.192 (still bad) 2008-Apr-27 23:12:12 INFO5 check_wapp_levels: WAPP power levels are between 0.123 and 1.191 (still bad) 2008-Apr-27 23:12:14 INFO5 check_wapp_levels: WAPP power levels are between 0.123 and 1.187 (still bad) 2008-Apr-27 23:12:16 INFO5 check_wapp_levels: WAPP power levels are between 0.122 and 1.184 (still bad) 2008-Apr-27 23:12:18 INFO5 check_wapp_levels: WAPP power levels are between 0.122 and 1.184 (still bad) 2008-Apr-27 23:12:20 INFO5 check_wapp_levels: WAPP power levels are between 0.121 and 1.183 (still bad) 2008-Apr-27 23:12:22 INFO5 check_wapp_levels: WAPP power levels are between 0.121 and 1.181 (still bad) 2008-Apr-27 23:12:24 INFO5 check_wapp_levels: WAPP power levels are between 0.129 and 1.182 (still bad) 2008-Apr-27 23:12:26 INFO5 check_wapp_levels: WAPP power levels are between 0.137 and 1.183 (still bad) 2008-Apr-27 23:12:28 INFO5 check_wapp_levels: WAPP power levels are between 0.136 and 1.181 (still bad) 2008-Apr-27 23:12:30 INFO5 check_wapp_levels: WAPP power levels are between 0.135 and 1.179 (still bad) 2008-Apr-27 23:12:32 INFO5 check_wapp_levels: WAPP power levels are between 0.140 and 1.182 (still bad) 2008-Apr-27 23:12:34 INFO5 check_wapp_levels: WAPP power levels are between 0.139 and 1.180 (still bad) 2008-Apr-27 23:12:36 INFO5 check_wapp_levels: WAPP power levels are between 0.138 and 1.179 (still bad) 2008-Apr-27 23:12:38 INFO5 check_wapp_levels: WAPP power levels are between 0.137 and 1.176 (still bad) 2008-Apr-27 23:12:40 INFO5 check_wapp_levels: WAPP power levels are between 0.137 and 1.175 (still bad) 2008-Apr-27 23:12:43 INFO5 check_wapp_levels: WAPP power levels are between 0.135 and 1.174 (still bad) 2008-Apr-27 23:12:45 INFO5 check_wapp_levels: WAPP power levels are between 0.137 and 1.177 (still bad) 2008-Apr-27 23:12:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.089 < 0.8)! 2008-Apr-27 23:12:47 LOG4 check_wapp_levels: WAPP-1 power levels: 0.952 0.089 1.178 1.119 2008-Apr-27 23:12:47 LOG4 check_wapp_levels: WAPP-2 power levels: 1.058 0.979 1.048 1.097 2008-Apr-27 23:12:47 LOG4 check_wapp_levels: WAPP-3 power levels: 0.973 1.008 1.077 0.931 2008-Apr-27 23:12:47 LOG4 check_wapp_levels: WAPP-4 power levels: 1.100 1.086 0.957 0.969 2008-Apr-27 23:12:49 INFO5 check_wapp_levels: WAPP power levels are between 0.089 and 1.176 (still bad) 2008-Apr-27 23:12:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.179 (still bad) 2008-Apr-27 23:12:53 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.177 (still bad) 2008-Apr-27 23:12:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.175 (still bad) 2008-Apr-27 23:12:57 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.174 (still bad) 2008-Apr-27 23:12:59 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.172 (still bad) 2008-Apr-27 23:13:01 INFO5 check_wapp_levels: WAPP power levels are between 0.092 and 1.171 (still bad) 2008-Apr-27 23:13:03 INFO5 check_wapp_levels: WAPP power levels are between 0.135 and 1.176 (still bad) 2008-Apr-27 23:13:05 INFO5 check_wapp_levels: WAPP power levels are between 0.134 and 1.173 (still bad) 2008-Apr-27 23:13:07 INFO5 check_wapp_levels: WAPP power levels are between 0.133 and 1.172 (still bad) 2008-Apr-27 23:13:09 INFO5 check_wapp_levels: WAPP power levels are between 0.129 and 1.176 (still bad) 2008-Apr-27 23:13:11 INFO5 check_wapp_levels: WAPP power levels are between 0.134 and 1.182 (still bad) 2008-Apr-27 23:13:13 INFO5 check_wapp_levels: WAPP power levels are between 0.133 and 1.181 (still bad) 2008-Apr-27 23:13:15 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.180 (still bad) 2008-Apr-27 23:13:17 INFO5 check_wapp_levels: WAPP power levels are between 0.139 and 1.184 (still bad) 2008-Apr-27 23:13:19 INFO5 check_wapp_levels: WAPP power levels are between 0.078 and 1.183 (still bad) 2008-Apr-27 23:13:21 INFO5 check_wapp_levels: WAPP power levels are between 0.143 and 1.181 (still bad) 2008-Apr-27 23:13:23 INFO5 check_wapp_levels: WAPP power levels are between 0.141 and 1.178 (still bad) 2008-Apr-27 23:13:25 INFO5 check_wapp_levels: WAPP power levels are between 0.139 and 1.176 (still bad) 2008-Apr-27 23:13:27 INFO5 check_wapp_levels: WAPP power levels are between 0.138 and 1.176 (still bad) 2008-Apr-27 23:13:29 INFO5 check_wapp_levels: WAPP power levels are between 0.140 and 1.176 (still bad) 2008-Apr-27 23:13:31 INFO5 check_wapp_levels: WAPP power levels are between 0.147 and 1.182 (still bad) 2008-Apr-27 23:13:33 INFO5 check_wapp_levels: WAPP power levels are between 0.140 and 1.184 (still bad) 2008-Apr-27 23:13:35 INFO5 check_wapp_levels: WAPP power levels are between 0.144 and 1.184 (still bad) 2008-Apr-27 23:13:37 INFO5 check_wapp_levels: WAPP power levels are between 0.143 and 1.184 (still bad) 2008-Apr-27 23:13:39 INFO5 check_wapp_levels: WAPP power levels are between 0.142 and 1.183 (still bad) 2008-Apr-27 23:13:41 INFO5 check_wapp_levels: WAPP power levels are between 0.141 and 1.180 (still bad) 2008-Apr-27 23:13:43 INFO5 check_wapp_levels: WAPP power levels are between 0.140 and 1.179 (still bad) 2008-Apr-27 23:13:45 INFO5 check_wapp_levels: WAPP power levels are between 0.140 and 1.174 (still bad) 2008-Apr-27 23:13:47 INFO5 check_wapp_levels: WAPP power levels are between 0.139 and 1.172 (still bad) 2008-Apr-27 23:13:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.138 < 0.8)! 2008-Apr-27 23:13:49 LOG4 check_wapp_levels: WAPP-1 power levels: 0.944 0.138 1.169 1.116 2008-Apr-27 23:13:49 LOG4 check_wapp_levels: WAPP-2 power levels: 1.061 0.981 1.045 1.096 2008-Apr-27 23:13:49 LOG4 check_wapp_levels: WAPP-3 power levels: 0.970 1.006 1.075 0.931 2008-Apr-27 23:13:49 LOG4 check_wapp_levels: WAPP-4 power levels: 1.097 1.082 0.955 0.967 2008-Apr-27 23:13:51 INFO5 check_wapp_levels: WAPP power levels are between 0.144 and 1.170 (still bad) 2008-Apr-27 23:13:53 INFO5 check_wapp_levels: WAPP power levels are between 0.136 and 1.174 (still bad) 2008-Apr-27 23:13:55 INFO5 check_wapp_levels: WAPP power levels are between 0.114 and 1.174 (still bad) 2008-Apr-27 23:13:57 INFO5 check_wapp_levels: WAPP power levels are between 0.116 and 1.179 (still bad) 2008-Apr-27 23:13:59 INFO5 check_wapp_levels: WAPP power levels are between 0.114 and 1.178 (still bad) 2008-Apr-27 23:14:02 INFO5 check_wapp_levels: WAPP power levels are between 0.143 and 1.178 (still bad) 2008-Apr-27 23:14:04 INFO5 check_wapp_levels: WAPP power levels are between 0.143 and 1.178 (still bad) 2008-Apr-27 23:14:06 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.177 (still bad) 2008-Apr-27 23:14:08 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.174 (still bad) 2008-Apr-27 23:14:10 INFO5 check_wapp_levels: WAPP power levels are between 0.118 and 1.175 (still bad) 2008-Apr-27 23:14:12 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.179 (still bad) 2008-Apr-27 23:14:14 INFO5 check_wapp_levels: WAPP power levels are between 0.083 and 1.180 (still bad) 2008-Apr-27 23:14:16 INFO5 check_wapp_levels: WAPP power levels are between 0.126 and 1.181 (still bad) 2008-Apr-27 23:14:18 INFO5 check_wapp_levels: WAPP power levels are between 0.131 and 1.180 (still bad) 2008-Apr-27 23:14:20 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.179 (still bad) 2008-Apr-27 23:14:22 INFO5 check_wapp_levels: WAPP power levels are between 0.120 and 1.179 (still bad) 2008-Apr-27 23:14:24 INFO5 check_wapp_levels: WAPP power levels are between 0.136 and 1.177 (still bad) 2008-Apr-27 23:14:26 INFO5 check_wapp_levels: WAPP power levels are between 0.138 and 1.178 (still bad) 2008-Apr-27 23:14:28 INFO5 check_wapp_levels: WAPP power levels are between 0.136 and 1.175 (still bad) 2008-Apr-27 23:14:30 INFO5 check_wapp_levels: WAPP power levels are between 0.135 and 1.173 (still bad) 2008-Apr-27 23:14:32 INFO5 check_wapp_levels: WAPP power levels are between 0.134 and 1.172 (still bad) 2008-Apr-27 23:14:34 INFO5 check_wapp_levels: WAPP power levels are between 0.134 and 1.169 (still bad) 2008-Apr-27 23:14:36 INFO5 check_wapp_levels: WAPP power levels are between 0.132 and 1.168 (still bad) 2008-Apr-27 23:14:38 INFO5 check_wapp_levels: WAPP power levels are between 0.132 and 1.168 (still bad) 2008-Apr-27 23:14:40 INFO5 check_wapp_levels: WAPP power levels are between 0.131 and 1.167 (still bad) 2008-Apr-27 23:14:42 INFO5 check_wapp_levels: WAPP power levels are between 0.129 and 1.167 (still bad) 2008-Apr-27 23:14:44 INFO5 check_wapp_levels: WAPP power levels are between 0.129 and 1.168 (still bad) 2008-Apr-27 23:14:46 INFO5 check_wapp_levels: WAPP power levels are between 0.129 and 1.169 (still bad) 2008-Apr-27 23:14:48 INFO5 check_wapp_levels: WAPP power levels are between 0.128 and 1.168 (still bad) 2008-Apr-27 23:14:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.128 < 0.8)! 2008-Apr-27 23:14:50 LOG4 check_wapp_levels: WAPP-1 power levels: 0.940 0.128 1.168 1.116 2008-Apr-27 23:14:50 LOG4 check_wapp_levels: WAPP-2 power levels: 1.054 0.976 1.044 1.094 2008-Apr-27 23:14:50 LOG4 check_wapp_levels: WAPP-3 power levels: 0.976 1.013 1.076 0.928 2008-Apr-27 23:14:50 LOG4 check_wapp_levels: WAPP-4 power levels: 1.093 1.083 0.953 0.967 2008-Apr-27 23:14:52 INFO5 check_wapp_levels: WAPP power levels are between 0.127 and 1.168 (still bad) 2008-Apr-27 23:14:54 INFO5 check_wapp_levels: WAPP power levels are between 0.127 and 1.166 (still bad) 2008-Apr-27 23:14:56 INFO5 check_wapp_levels: WAPP power levels are between 0.127 and 1.164 (still bad) 2008-Apr-27 23:14:58 INFO5 check_wapp_levels: WAPP power levels are between 0.127 and 1.163 (still bad) 2008-Apr-27 23:15:00 INFO5 check_wapp_levels: WAPP power levels are between 0.126 and 1.161 (still bad) 2008-Apr-27 23:15:02 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.168 (still bad) 2008-Apr-27 23:15:04 INFO5 check_wapp_levels: WAPP power levels are between 0.135 and 1.170 (still bad) 2008-Apr-27 23:15:06 INFO5 check_wapp_levels: WAPP power levels are between 0.134 and 1.168 (still bad) 2008-Apr-27 23:15:08 INFO5 check_wapp_levels: WAPP power levels are between 0.133 and 1.167 (still bad) 2008-Apr-27 23:15:10 INFO5 check_wapp_levels: WAPP power levels are between 0.125 and 1.167 (still bad) 2008-Apr-27 23:15:12 INFO5 check_wapp_levels: WAPP power levels are between 0.120 and 1.165 (still bad) 2008-Apr-27 23:15:14 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.165 (still bad) 2008-Apr-27 23:15:16 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.164 (still bad) 2008-Apr-27 23:15:18 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.165 (still bad) 2008-Apr-27 23:15:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.166 (still bad) 2008-Apr-27 23:15:22 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.166 (still bad) 2008-Apr-27 23:15:25 INFO5 check_wapp_levels: WAPP power levels are between 0.129 and 1.166 (still bad) 2008-Apr-27 23:15:27 INFO5 check_wapp_levels: WAPP power levels are between 0.127 and 1.165 (still bad) 2008-Apr-27 23:15:29 INFO5 check_wapp_levels: WAPP power levels are between 0.131 and 1.163 (still bad) 2008-Apr-27 23:15:31 INFO5 check_wapp_levels: WAPP power levels are between 0.124 and 1.168 (still bad) 2008-Apr-27 23:15:33 INFO5 check_wapp_levels: WAPP power levels are between 0.086 and 1.169 (still bad) 2008-Apr-27 23:15:35 INFO5 check_wapp_levels: WAPP power levels are between 0.122 and 1.170 (still bad) 2008-Apr-27 23:15:37 INFO5 check_wapp_levels: WAPP power levels are between 0.121 and 1.169 (still bad) 2008-Apr-27 23:15:39 INFO5 check_wapp_levels: WAPP power levels are between 0.121 and 1.167 (still bad) 2008-Apr-27 23:15:41 INFO5 check_wapp_levels: WAPP power levels are between 0.120 and 1.167 (still bad) 2008-Apr-27 23:15:43 INFO5 check_wapp_levels: WAPP power levels are between 0.115 and 1.168 (still bad) 2008-Apr-27 23:15:45 INFO5 check_wapp_levels: WAPP power levels are between 0.138 and 1.167 (still bad) 2008-Apr-27 23:15:47 INFO5 check_wapp_levels: WAPP power levels are between 0.134 and 1.170 (still bad) 2008-Apr-27 23:15:49 INFO5 check_wapp_levels: WAPP power levels are between 0.119 and 1.175 (still bad) 2008-Apr-27 23:15:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.8)! 2008-Apr-27 23:15:51 LOG4 check_wapp_levels: WAPP-1 power levels: 0.943 0.110 1.180 1.115 2008-Apr-27 23:15:51 LOG4 check_wapp_levels: WAPP-2 power levels: 1.059 0.974 1.046 1.094 2008-Apr-27 23:15:51 LOG4 check_wapp_levels: WAPP-3 power levels: 0.970 1.001 1.074 0.927 2008-Apr-27 23:15:51 LOG4 check_wapp_levels: WAPP-4 power levels: 1.094 1.084 0.953 0.966 2008-Apr-27 23:15:53 INFO5 check_wapp_levels: WAPP power levels are between 0.118 and 1.176 (still bad) 2008-Apr-27 23:15:55 INFO5 check_wapp_levels: WAPP power levels are between 0.122 and 1.177 (still bad) 2008-Apr-27 23:15:57 INFO5 check_wapp_levels: WAPP power levels are between 0.077 and 1.175 (still bad) 2008-Apr-27 23:15:59 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.175 (still bad) 2008-Apr-27 23:16:01 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.174 (still bad) 2008-Apr-27 23:16:03 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.173 (still bad) 2008-Apr-27 23:16:05 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.172 (still bad) 2008-Apr-27 23:16:07 INFO5 check_wapp_levels: WAPP power levels are between 0.125 and 1.177 (still bad) 2008-Apr-27 23:16:09 INFO5 check_wapp_levels: WAPP power levels are between 0.124 and 1.174 (still bad) 2008-Apr-27 23:16:11 INFO5 check_wapp_levels: WAPP power levels are between 0.123 and 1.171 (still bad) 2008-Apr-27 23:16:13 INFO5 check_wapp_levels: WAPP power levels are between 0.121 and 1.170 (still bad) 2008-Apr-27 23:16:15 INFO5 check_wapp_levels: WAPP power levels are between 0.121 and 1.168 (still bad) 2008-Apr-27 23:16:17 INFO5 check_wapp_levels: WAPP power levels are between 0.120 and 1.166 (still bad) 2008-Apr-27 23:16:19 INFO5 check_wapp_levels: WAPP power levels are between 0.119 and 1.167 (still bad) 2008-Apr-27 23:16:21 INFO5 check_wapp_levels: WAPP power levels are between 0.120 and 1.165 (still bad) 2008-Apr-27 23:16:23 INFO5 check_wapp_levels: WAPP power levels are between 0.113 and 1.172 (still bad) 2008-Apr-27 23:16:25 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.170 (still bad) 2008-Apr-27 23:16:27 INFO5 check_wapp_levels: WAPP power levels are between 0.089 and 1.171 (still bad) 2008-Apr-27 23:16:29 INFO5 check_wapp_levels: WAPP power levels are between 0.117 and 1.171 (still bad) 2008-Apr-27 23:16:31 INFO5 check_wapp_levels: WAPP power levels are between 0.139 and 1.169 (still bad) 2008-Apr-27 23:16:33 INFO5 check_wapp_levels: WAPP power levels are between 0.140 and 1.166 (still bad) 2008-Apr-27 23:16:35 INFO5 check_wapp_levels: WAPP power levels are between 0.139 and 1.166 (still bad) 2008-Apr-27 23:16:37 INFO5 check_wapp_levels: WAPP power levels are between 0.138 and 1.169 (still bad) 2008-Apr-27 23:16:39 INFO5 check_wapp_levels: WAPP power levels are between 0.139 and 1.166 (still bad) 2008-Apr-27 23:16:41 INFO5 check_wapp_levels: WAPP power levels are between 0.125 and 1.168 (still bad) 2008-Apr-27 23:16:43 INFO5 check_wapp_levels: WAPP power levels are between 0.120 and 1.170 (still bad) 2008-Apr-27 23:16:45 INFO5 check_wapp_levels: WAPP power levels are between 0.081 and 1.168 (still bad) 2008-Apr-27 23:16:47 INFO5 check_wapp_levels: WAPP power levels are between 0.086 and 1.170 (still bad) 2008-Apr-27 23:16:50 INFO5 check_wapp_levels: WAPP power levels are between 0.142 and 1.173 (still bad) 2008-Apr-27 23:16:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.140 < 0.8)! 2008-Apr-27 23:16:52 LOG4 check_wapp_levels: WAPP-1 power levels: 0.937 0.140 1.171 1.112 2008-Apr-27 23:16:52 LOG4 check_wapp_levels: WAPP-2 power levels: 1.056 0.974 1.044 1.094 2008-Apr-27 23:16:52 LOG4 check_wapp_levels: WAPP-3 power levels: 0.968 1.003 1.086 0.940 2008-Apr-27 23:16:52 LOG4 check_wapp_levels: WAPP-4 power levels: 1.102 1.091 0.960 0.974 2008-Apr-27 23:16:54 INFO5 check_wapp_levels: WAPP power levels are between 0.146 and 1.170 (still bad) 2008-Apr-27 23:16:56 INFO5 check_wapp_levels: WAPP power levels are between 0.143 and 1.168 (still bad) 2008-Apr-27 23:16:58 INFO5 check_wapp_levels: WAPP power levels are between 0.139 and 1.173 (still bad) 2008-Apr-27 23:17:00 INFO5 check_wapp_levels: WAPP power levels are between 0.138 and 1.172 (still bad) 2008-Apr-27 23:17:02 INFO5 check_wapp_levels: WAPP power levels are between 0.138 and 1.169 (still bad) 2008-Apr-27 23:17:04 INFO5 check_wapp_levels: WAPP power levels are between 0.139 and 1.169 (still bad) 2008-Apr-27 23:17:06 INFO5 check_wapp_levels: WAPP power levels are between 0.138 and 1.167 (still bad) 2008-Apr-27 23:17:08 INFO5 check_wapp_levels: WAPP power levels are between 0.122 and 1.174 (still bad) 2008-Apr-27 23:17:10 INFO5 check_wapp_levels: WAPP power levels are between 0.145 and 1.176 (still bad) 2008-Apr-27 23:17:12 INFO5 check_wapp_levels: WAPP power levels are between 0.140 and 1.186 (still bad) 2008-Apr-27 23:17:14 INFO5 check_wapp_levels: WAPP power levels are between 0.140 and 1.189 (still bad) 2008-Apr-27 23:17:16 INFO5 check_wapp_levels: WAPP power levels are between 0.140 and 1.197 (still bad) 2008-Apr-27 23:17:18 INFO5 check_wapp_levels: WAPP power levels are between 0.139 and 1.203 (still bad) 2008-Apr-27 23:17:20 INFO5 check_wapp_levels: WAPP power levels are between 0.139 and 1.210 (still bad) 2008-Apr-27 23:17:22 INFO5 check_wapp_levels: WAPP power levels are between 0.139 and 1.211 (still bad) 2008-Apr-27 23:17:24 INFO5 check_wapp_levels: WAPP power levels are between 0.139 and 1.208 (still bad) 2008-Apr-27 23:17:26 INFO5 check_wapp_levels: WAPP power levels are between 0.139 and 1.202 (still bad) 2008-Apr-27 23:17:28 INFO5 check_wapp_levels: WAPP power levels are between 0.140 and 1.198 (still bad) 2008-Apr-27 23:17:30 INFO5 check_wapp_levels: WAPP power levels are between 0.129 and 1.191 (still bad) 2008-Apr-27 23:17:32 INFO5 check_wapp_levels: WAPP power levels are between 0.124 and 1.182 (still bad) 2008-Apr-27 23:17:34 INFO5 check_wapp_levels: WAPP power levels are between 0.124 and 1.176 (still bad) 2008-Apr-27 23:17:36 INFO5 check_wapp_levels: WAPP power levels are between 0.123 and 1.173 (still bad) 2008-Apr-27 23:17:38 INFO5 check_wapp_levels: WAPP power levels are between 0.123 and 1.171 (still bad) 2008-Apr-27 23:17:40 INFO5 check_wapp_levels: WAPP power levels are between 0.122 and 1.169 (still bad) 2008-Apr-27 23:17:42 INFO5 check_wapp_levels: WAPP power levels are between 0.138 and 1.175 (still bad) 2008-Apr-27 23:17:44 INFO5 check_wapp_levels: WAPP power levels are between 0.136 and 1.172 (still bad) 2008-Apr-27 23:17:46 INFO5 check_wapp_levels: WAPP power levels are between 0.135 and 1.169 (still bad) 2008-Apr-27 23:17:48 INFO5 check_wapp_levels: WAPP power levels are between 0.134 and 1.169 (still bad) 2008-Apr-27 23:17:50 INFO5 check_wapp_levels: WAPP power levels are between 0.133 and 1.165 (still bad) 2008-Apr-27 23:17:52 INFO5 check_wapp_levels: WAPP power levels are between 0.137 and 1.164 (still bad) 2008-Apr-27 23:17:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.138 < 0.8)! 2008-Apr-27 23:17:54 LOG4 check_wapp_levels: WAPP-1 power levels: 0.937 0.138 1.162 1.110 2008-Apr-27 23:17:54 LOG4 check_wapp_levels: WAPP-2 power levels: 1.065 0.982 1.050 1.099 2008-Apr-27 23:17:54 LOG4 check_wapp_levels: WAPP-3 power levels: 0.970 1.004 1.074 0.932 2008-Apr-27 23:17:54 LOG4 check_wapp_levels: WAPP-4 power levels: 1.097 1.084 0.956 0.968 2008-Apr-27 23:17:56 INFO5 check_wapp_levels: WAPP power levels are between 0.137 and 1.162 (still bad) 2008-Apr-27 23:17:58 INFO5 check_wapp_levels: WAPP power levels are between 0.147 and 1.170 (still bad) 2008-Apr-27 23:18:00 INFO5 check_wapp_levels: WAPP power levels are between 0.086 and 1.171 (still bad) 2008-Apr-27 23:18:02 INFO5 check_wapp_levels: WAPP power levels are between 0.117 and 1.169 (still bad) 2008-Apr-27 23:18:04 INFO5 check_wapp_levels: WAPP power levels are between 0.123 and 1.172 (still bad) 2008-Apr-27 23:18:06 INFO5 check_wapp_levels: WAPP power levels are between 0.121 and 1.169 (still bad) 2008-Apr-27 23:18:08 INFO5 check_wapp_levels: WAPP power levels are between 0.121 and 1.167 (still bad) 2008-Apr-27 23:18:10 INFO5 check_wapp_levels: WAPP power levels are between 0.119 and 1.164 (still bad) 2008-Apr-27 23:18:12 INFO5 check_wapp_levels: WAPP power levels are between 0.119 and 1.164 (still bad) 2008-Apr-27 23:18:15 INFO5 check_wapp_levels: WAPP power levels are between 0.117 and 1.165 (still bad) 2008-Apr-27 23:18:17 INFO5 check_wapp_levels: WAPP power levels are between 0.117 and 1.165 (still bad) 2008-Apr-27 23:18:19 INFO5 check_wapp_levels: WAPP power levels are between 0.126 and 1.164 (still bad) 2008-Apr-27 23:18:21 INFO5 check_wapp_levels: WAPP power levels are between 0.123 and 1.167 (still bad) 2008-Apr-27 23:18:23 INFO5 check_wapp_levels: WAPP power levels are between 0.122 and 1.172 (still bad) 2008-Apr-27 23:18:25 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.172 (still bad) 2008-Apr-27 23:18:27 INFO5 check_wapp_levels: WAPP power levels are between 0.132 and 1.173 (still bad) 2008-Apr-27 23:18:29 INFO5 check_wapp_levels: WAPP power levels are between 0.078 and 1.171 (still bad) 2008-Apr-27 23:18:31 INFO5 check_wapp_levels: WAPP power levels are between 0.119 and 1.173 (still bad) 2008-Apr-27 23:18:33 INFO5 check_wapp_levels: WAPP power levels are between 0.134 and 1.174 (still bad) 2008-Apr-27 23:18:35 INFO5 check_wapp_levels: WAPP power levels are between 0.129 and 1.175 (still bad) 2008-Apr-27 23:18:37 INFO5 check_wapp_levels: WAPP power levels are between 0.133 and 1.174 (still bad) 2008-Apr-27 23:18:39 INFO5 check_wapp_levels: WAPP power levels are between 0.129 and 1.171 (still bad) 2008-Apr-27 23:18:41 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.172 (still bad) 2008-Apr-27 23:18:43 INFO5 check_wapp_levels: WAPP power levels are between 0.122 and 1.174 (still bad) 2008-Apr-27 23:18:45 INFO5 check_wapp_levels: WAPP power levels are between 0.126 and 1.176 (still bad) 2008-Apr-27 23:18:47 INFO5 check_wapp_levels: WAPP power levels are between 0.125 and 1.173 (still bad) 2008-Apr-27 23:18:49 INFO5 check_wapp_levels: WAPP power levels are between 0.129 and 1.175 (still bad) 2008-Apr-27 23:18:51 INFO5 check_wapp_levels: WAPP power levels are between 0.136 and 1.174 (still bad) 2008-Apr-27 23:18:53 INFO5 check_wapp_levels: WAPP power levels are between 0.120 and 1.175 (still bad) 2008-Apr-27 23:18:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.8)! 2008-Apr-27 23:18:55 LOG4 check_wapp_levels: WAPP-1 power levels: 0.937 0.105 1.174 1.117 2008-Apr-27 23:18:55 LOG4 check_wapp_levels: WAPP-2 power levels: 1.055 0.976 1.046 1.095 2008-Apr-27 23:18:55 LOG4 check_wapp_levels: WAPP-3 power levels: 0.974 1.006 1.076 0.932 2008-Apr-27 23:18:55 LOG4 check_wapp_levels: WAPP-4 power levels: 1.099 1.081 0.957 0.968 2008-Apr-27 23:18:57 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.174 (still bad) 2008-Apr-27 23:18:59 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.176 (still bad) 2008-Apr-27 23:19:01 INFO5 check_wapp_levels: WAPP power levels are between 0.122 and 1.175 (still bad) 2008-Apr-27 23:19:03 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.175 (still bad) 2008-Apr-27 23:19:05 INFO5 check_wapp_levels: WAPP power levels are between 0.123 and 1.174 (still bad) 2008-Apr-27 23:19:07 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.176 (still bad) 2008-Apr-27 23:19:09 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.175 (still bad) 2008-Apr-27 23:19:11 INFO5 check_wapp_levels: WAPP power levels are between 0.115 and 1.172 (still bad) 2008-Apr-27 23:19:13 INFO5 check_wapp_levels: WAPP power levels are between 0.114 and 1.170 (still bad) 2008-Apr-27 23:19:15 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.169 (still bad) 2008-Apr-27 23:19:17 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.166 (still bad) 2008-Apr-27 23:19:19 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.170 (still bad) 2008-Apr-27 23:19:21 INFO5 check_wapp_levels: WAPP power levels are between 0.096 and 1.170 (still bad) 2008-Apr-27 23:19:23 INFO5 check_wapp_levels: WAPP power levels are between 0.126 and 1.168 (still bad) 2008-Apr-27 23:19:25 INFO5 check_wapp_levels: WAPP power levels are between 0.134 and 1.171 (still bad) 2008-Apr-27 23:19:27 INFO5 check_wapp_levels: WAPP power levels are between 0.114 and 1.172 (still bad) 2008-Apr-27 23:19:29 INFO5 check_wapp_levels: WAPP power levels are between 0.092 and 1.172 (still bad) 2008-Apr-27 23:19:31 INFO5 check_wapp_levels: WAPP power levels are between 0.141 and 1.172 (still bad) 2008-Apr-27 23:19:33 INFO5 check_wapp_levels: WAPP power levels are between 0.125 and 1.175 (still bad) 2008-Apr-27 23:19:36 INFO5 check_wapp_levels: WAPP power levels are between 0.132 and 1.176 (still bad) 2008-Apr-27 23:19:38 INFO5 check_wapp_levels: WAPP power levels are between 0.088 and 1.177 (still bad) 2008-Apr-27 23:19:40 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.178 (still bad) 2008-Apr-27 23:19:42 INFO5 check_wapp_levels: WAPP power levels are between 0.130 and 1.176 (still bad) 2008-Apr-27 23:19:44 INFO5 check_wapp_levels: WAPP power levels are between 0.127 and 1.174 (still bad) 2008-Apr-27 23:19:46 INFO5 check_wapp_levels: WAPP power levels are between 0.133 and 1.175 (still bad) 2008-Apr-27 23:19:48 INFO5 check_wapp_levels: WAPP power levels are between 0.134 and 1.172 (still bad) 2008-Apr-27 23:19:50 INFO5 check_wapp_levels: WAPP power levels are between 0.132 and 1.171 (still bad) 2008-Apr-27 23:19:52 INFO5 check_wapp_levels: WAPP power levels are between 0.131 and 1.168 (still bad) 2008-Apr-27 23:19:54 INFO5 check_wapp_levels: WAPP power levels are between 0.145 and 1.171 (still bad) 2008-Apr-27 23:19:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.146 < 0.8)! 2008-Apr-27 23:19:56 LOG4 check_wapp_levels: WAPP-1 power levels: 0.937 0.146 1.168 1.113 2008-Apr-27 23:19:56 LOG4 check_wapp_levels: WAPP-2 power levels: 1.058 0.973 1.047 1.095 2008-Apr-27 23:19:56 LOG4 check_wapp_levels: WAPP-3 power levels: 0.974 1.007 1.077 0.933 2008-Apr-27 23:19:56 LOG4 check_wapp_levels: WAPP-4 power levels: 1.104 1.086 0.960 0.971 2008-Apr-27 23:19:58 INFO5 check_wapp_levels: WAPP power levels are between 0.135 and 1.166 (still bad) 2008-Apr-27 23:20:00 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.165 (still bad) 2008-Apr-27 23:20:02 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.163 (still bad) 2008-Apr-27 23:20:04 INFO5 check_wapp_levels: WAPP power levels are between 0.119 and 1.168 (still bad) 2008-Apr-27 23:20:06 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.166 (still bad) 2008-Apr-27 23:20:08 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.163 (still bad) 2008-Apr-27 23:20:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.163 (still bad) 2008-Apr-27 23:20:12 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.165 (still bad) 2008-Apr-27 23:20:14 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.168 (still bad) 2008-Apr-27 23:20:16 INFO5 check_wapp_levels: WAPP power levels are between 0.126 and 1.170 (still bad) 2008-Apr-27 23:20:18 INFO5 check_wapp_levels: WAPP power levels are between 0.120 and 1.170 (still bad) 2008-Apr-27 23:20:20 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.174 (still bad) 2008-Apr-27 23:20:22 INFO5 check_wapp_levels: WAPP power levels are between 0.134 and 1.178 (still bad) 2008-Apr-27 23:20:24 INFO5 check_wapp_levels: WAPP power levels are between 0.133 and 1.174 (still bad) 2008-Apr-27 23:20:26 INFO5 check_wapp_levels: WAPP power levels are between 0.140 and 1.175 (still bad) 2008-Apr-27 23:20:28 INFO5 check_wapp_levels: WAPP power levels are between 0.120 and 1.175 (still bad) 2008-Apr-27 23:20:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.176 (still bad) 2008-Apr-27 23:20:32 INFO5 check_wapp_levels: WAPP power levels are between 0.134 and 1.176 (still bad) 2008-Apr-27 23:20:34 INFO5 check_wapp_levels: WAPP power levels are between 0.125 and 1.175 (still bad) 2008-Apr-27 23:20:36 INFO5 check_wapp_levels: WAPP power levels are between 0.118 and 1.178 (still bad) 2008-Apr-27 23:20:38 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.175 (still bad) 2008-Apr-27 23:20:40 INFO5 check_wapp_levels: WAPP power levels are between 0.137 and 1.176 (still bad) 2008-Apr-27 23:20:42 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.177 (still bad) 2008-Apr-27 23:20:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.176 (still bad) 2008-Apr-27 23:20:46 INFO5 check_wapp_levels: WAPP power levels are between 0.124 and 1.173 (still bad) 2008-Apr-27 23:20:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.173 (still bad) 2008-Apr-27 23:20:50 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.171 (still bad) 2008-Apr-27 23:20:52 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.169 (still bad) 2008-Apr-27 23:20:54 INFO5 check_wapp_levels: WAPP power levels are between 0.115 and 1.170 (still bad) 2008-Apr-27 23:20:56 INFO5 check_wapp_levels: WAPP power levels are between 0.096 and 1.172 (still bad) 2008-Apr-27 23:20:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.8)! 2008-Apr-27 23:20:59 LOG4 check_wapp_levels: WAPP-1 power levels: 0.938 0.110 1.174 1.112 2008-Apr-27 23:20:59 LOG4 check_wapp_levels: WAPP-2 power levels: 1.056 0.975 1.047 1.096 2008-Apr-27 23:20:59 LOG4 check_wapp_levels: WAPP-3 power levels: 0.972 1.002 1.075 0.931 2008-Apr-27 23:20:59 LOG4 check_wapp_levels: WAPP-4 power levels: 1.099 1.081 0.957 0.966 2008-Apr-27 23:21:01 INFO5 check_wapp_levels: WAPP power levels are between 0.126 and 1.178 (still bad) 2008-Apr-27 23:21:03 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.177 (still bad) 2008-Apr-27 23:21:05 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.176 (still bad) 2008-Apr-27 23:21:07 INFO5 check_wapp_levels: WAPP power levels are between 0.117 and 1.176 (still bad) 2008-Apr-27 23:21:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.176 (still bad) 2008-Apr-27 23:21:11 INFO5 check_wapp_levels: WAPP power levels are between 0.146 and 1.177 (still bad) 2008-Apr-27 23:21:13 INFO5 check_wapp_levels: WAPP power levels are between 0.135 and 1.177 (still bad) 2008-Apr-27 23:21:15 INFO5 check_wapp_levels: WAPP power levels are between 0.078 and 1.173 (still bad) 2008-Apr-27 23:21:17 INFO5 check_wapp_levels: WAPP power levels are between 0.081 and 1.171 (still bad) 2008-Apr-27 23:21:19 INFO5 check_wapp_levels: WAPP power levels are between 0.127 and 1.172 (still bad) 2008-Apr-27 23:21:21 INFO5 check_wapp_levels: WAPP power levels are between 0.116 and 1.178 (still bad) 2008-Apr-27 23:21:23 INFO5 check_wapp_levels: WAPP power levels are between 0.126 and 1.179 (still bad) 2008-Apr-27 23:21:25 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.177 (still bad) 2008-Apr-27 23:21:27 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.177 (still bad) 2008-Apr-27 23:21:29 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.177 (still bad) 2008-Apr-27 23:21:31 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.175 (still bad) 2008-Apr-27 23:21:33 INFO5 check_wapp_levels: WAPP power levels are between 0.121 and 1.173 (still bad) 2008-Apr-27 23:21:35 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.176 (still bad) 2008-Apr-27 23:21:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.174 (still bad) 2008-Apr-27 23:21:39 INFO5 check_wapp_levels: WAPP power levels are between 0.120 and 1.175 (still bad) 2008-Apr-27 23:21:41 INFO5 check_wapp_levels: WAPP power levels are between 0.131 and 1.178 (still bad) 2008-Apr-27 23:21:43 INFO5 check_wapp_levels: WAPP power levels are between 0.117 and 1.178 (still bad) 2008-Apr-27 23:21:45 INFO5 check_wapp_levels: WAPP power levels are between 0.092 and 1.179 (still bad) 2008-Apr-27 23:21:47 INFO5 check_wapp_levels: WAPP power levels are between 0.137 and 1.175 (still bad) 2008-Apr-27 23:21:49 INFO5 check_wapp_levels: WAPP power levels are between 0.133 and 1.175 (still bad) 2008-Apr-27 23:21:51 INFO5 check_wapp_levels: WAPP power levels are between 0.081 and 1.177 (still bad) 2008-Apr-27 23:21:53 INFO5 check_wapp_levels: WAPP power levels are between 0.137 and 1.176 (still bad) 2008-Apr-27 23:21:55 INFO5 check_wapp_levels: WAPP power levels are between 0.136 and 1.174 (still bad) 2008-Apr-27 23:21:57 INFO5 check_wapp_levels: WAPP power levels are between 0.130 and 1.171 (still bad) 2008-Apr-27 23:21:59 INFO5 check_wapp_levels: WAPP power levels are between 0.134 and 1.173 (still bad) 2008-Apr-27 23:22:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.129 < 0.8)! 2008-Apr-27 23:22:01 LOG4 check_wapp_levels: WAPP-1 power levels: 0.942 0.129 1.170 1.113 2008-Apr-27 23:22:01 LOG4 check_wapp_levels: WAPP-2 power levels: 1.055 0.973 1.045 1.095 2008-Apr-27 23:22:01 LOG4 check_wapp_levels: WAPP-3 power levels: 0.968 1.003 1.076 0.931 2008-Apr-27 23:22:01 LOG4 check_wapp_levels: WAPP-4 power levels: 1.096 1.080 0.955 0.966 2008-Apr-27 23:22:03 INFO5 check_wapp_levels: WAPP power levels are between 0.131 and 1.170 (still bad) 2008-Apr-27 23:22:05 INFO5 check_wapp_levels: WAPP power levels are between 0.125 and 1.173 (still bad) 2008-Apr-27 23:22:07 INFO5 check_wapp_levels: WAPP power levels are between 0.135 and 1.176 (still bad) 2008-Apr-27 23:22:09 INFO5 check_wapp_levels: WAPP power levels are between 0.127 and 1.176 (still bad) 2008-Apr-27 23:22:11 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.174 (still bad) 2008-Apr-27 23:22:13 INFO5 check_wapp_levels: WAPP power levels are between 0.124 and 1.176 (still bad) 2008-Apr-27 23:22:15 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.174 (still bad) 2008-Apr-27 23:22:17 INFO5 check_wapp_levels: WAPP power levels are between 0.149 and 1.174 (still bad) 2008-Apr-27 23:22:19 INFO5 check_wapp_levels: WAPP power levels are between 0.148 and 1.172 (still bad) 2008-Apr-27 23:22:21 INFO5 check_wapp_levels: WAPP power levels are between 0.146 and 1.171 (still bad) 2008-Apr-27 23:22:23 INFO5 check_wapp_levels: WAPP power levels are between 0.074 and 1.172 (still bad) 2008-Apr-27 23:22:26 INFO5 check_wapp_levels: WAPP power levels are between 0.074 and 1.170 (still bad) 2008-Apr-27 23:22:28 INFO5 check_wapp_levels: WAPP power levels are between 0.133 and 1.176 (still bad) 2008-Apr-27 23:22:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.174 (still bad) 2008-Apr-27 23:22:32 INFO5 check_wapp_levels: WAPP power levels are between 0.130 and 1.179 (still bad) 2008-Apr-27 23:22:34 INFO5 check_wapp_levels: WAPP power levels are between 0.149 and 1.178 (still bad) 2008-Apr-27 23:22:36 INFO5 check_wapp_levels: WAPP power levels are between 0.137 and 1.177 (still bad) 2008-Apr-27 23:22:38 INFO5 check_wapp_levels: WAPP power levels are between 0.149 and 1.179 (still bad) 2008-Apr-27 23:22:40 INFO5 check_wapp_levels: WAPP power levels are between 0.131 and 1.179 (still bad) 2008-Apr-27 23:22:42 INFO5 check_wapp_levels: WAPP power levels are between 0.133 and 1.179 (still bad) 2008-Apr-27 23:22:44 INFO5 check_wapp_levels: WAPP power levels are between 0.128 and 1.176 (still bad) 2008-Apr-27 23:22:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.176 (still bad) 2008-Apr-27 23:22:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.173 (still bad) 2008-Apr-27 23:22:50 INFO5 check_wapp_levels: WAPP power levels are between 0.123 and 1.175 (still bad) 2008-Apr-27 23:22:52 INFO5 check_wapp_levels: WAPP power levels are between 0.120 and 1.177 (still bad) 2008-Apr-27 23:22:54 INFO5 check_wapp_levels: WAPP power levels are between 0.138 and 1.179 (still bad) 2008-Apr-27 23:22:56 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.180 (still bad) 2008-Apr-27 23:22:58 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.181 (still bad) 2008-Apr-27 23:23:00 INFO5 check_wapp_levels: WAPP power levels are between 0.072 and 1.177 (still bad) 2008-Apr-27 23:23:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.8)! 2008-Apr-27 23:23:02 LOG4 check_wapp_levels: WAPP-1 power levels: 0.945 0.104 1.176 1.115 2008-Apr-27 23:23:02 LOG4 check_wapp_levels: WAPP-2 power levels: 1.055 0.976 1.047 1.095 2008-Apr-27 23:23:02 LOG4 check_wapp_levels: WAPP-3 power levels: 0.971 1.005 1.078 0.932 2008-Apr-27 23:23:02 LOG4 check_wapp_levels: WAPP-4 power levels: 1.098 1.082 0.956 0.966 2008-Apr-27 23:23:04 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.177 (still bad) 2008-Apr-27 23:23:06 INFO5 check_wapp_levels: WAPP power levels are between 0.074 and 1.176 (still bad) 2008-Apr-27 23:23:08 INFO5 check_wapp_levels: WAPP power levels are between 0.080 and 1.174 (still bad) 2008-Apr-27 23:23:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.172 (still bad) 2008-Apr-27 23:23:12 INFO5 check_wapp_levels: WAPP power levels are between 0.135 and 1.177 (still bad) 2008-Apr-27 23:23:14 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.177 (still bad) 2008-Apr-27 23:23:16 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.175 (still bad) 2008-Apr-27 23:23:18 INFO5 check_wapp_levels: WAPP power levels are between 0.124 and 1.175 (still bad) 2008-Apr-27 23:23:20 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.171 (still bad) 2008-Apr-27 23:23:22 INFO5 check_wapp_levels: WAPP power levels are between 0.089 and 1.174 (still bad) 2008-Apr-27 23:23:24 INFO5 check_wapp_levels: WAPP power levels are between 0.121 and 1.176 (still bad) 2008-Apr-27 23:23:26 INFO5 check_wapp_levels: WAPP power levels are between 0.116 and 1.176 (still bad) 2008-Apr-27 23:23:28 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.178 (still bad) 2008-Apr-27 23:23:30 INFO5 check_wapp_levels: WAPP power levels are between 0.113 and 1.175 (still bad) 2008-Apr-27 23:23:32 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.174 (still bad) 2008-Apr-27 23:23:34 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.171 (still bad) 2008-Apr-27 23:23:36 INFO5 check_wapp_levels: WAPP power levels are between 0.120 and 1.170 (still bad) 2008-Apr-27 23:23:38 INFO5 check_wapp_levels: WAPP power levels are between 0.117 and 1.172 (still bad) 2008-Apr-27 23:23:40 INFO5 check_wapp_levels: WAPP power levels are between 0.077 and 1.176 (still bad) 2008-Apr-27 23:23:42 INFO5 check_wapp_levels: WAPP power levels are between 0.138 and 1.176 (still bad) 2008-Apr-27 23:23:44 INFO5 check_wapp_levels: WAPP power levels are between 0.139 and 1.175 (still bad) 2008-Apr-27 23:23:46 INFO5 check_wapp_levels: WAPP power levels are between 0.120 and 1.177 (still bad) 2008-Apr-27 23:23:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.175 (still bad) 2008-Apr-27 23:23:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.173 (still bad) 2008-Apr-27 23:23:53 INFO5 check_wapp_levels: WAPP power levels are between 0.125 and 1.176 (still bad) 2008-Apr-27 23:23:55 INFO5 check_wapp_levels: WAPP power levels are between 0.115 and 1.179 (still bad) 2008-Apr-27 23:23:57 INFO5 check_wapp_levels: WAPP power levels are between 0.132 and 1.179 (still bad) 2008-Apr-27 23:23:59 INFO5 check_wapp_levels: WAPP power levels are between 0.134 and 1.179 (still bad) 2008-Apr-27 23:24:01 INFO5 check_wapp_levels: WAPP power levels are between 0.132 and 1.176 (still bad) 2008-Apr-27 23:24:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.117 < 0.8)! 2008-Apr-27 23:24:03 LOG4 check_wapp_levels: WAPP-1 power levels: 0.942 0.117 1.177 1.117 2008-Apr-27 23:24:03 LOG4 check_wapp_levels: WAPP-2 power levels: 1.060 0.977 1.047 1.096 2008-Apr-27 23:24:03 LOG4 check_wapp_levels: WAPP-3 power levels: 0.974 1.005 1.078 0.931 2008-Apr-27 23:24:03 LOG4 check_wapp_levels: WAPP-4 power levels: 1.102 1.083 0.960 0.968 2008-Apr-27 23:24:05 INFO5 check_wapp_levels: WAPP power levels are between 0.130 and 1.181 (still bad) 2008-Apr-27 23:24:07 INFO5 check_wapp_levels: WAPP power levels are between 0.133 and 1.176 (still bad) 2008-Apr-27 23:24:09 INFO5 check_wapp_levels: WAPP power levels are between 0.143 and 1.173 (still bad) 2008-Apr-27 23:24:11 INFO5 check_wapp_levels: WAPP power levels are between 0.142 and 1.172 (still bad) 2008-Apr-27 23:24:13 INFO5 check_wapp_levels: WAPP power levels are between 0.142 and 1.170 (still bad) 2008-Apr-27 23:24:15 INFO5 check_wapp_levels: WAPP power levels are between 0.117 and 1.171 (still bad) 2008-Apr-27 23:24:17 INFO5 check_wapp_levels: WAPP power levels are between 0.083 and 1.171 (still bad) 2008-Apr-27 23:24:19 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.172 (still bad) 2008-Apr-27 23:24:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.169 (still bad) 2008-Apr-27 23:24:23 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.170 (still bad) 2008-Apr-27 23:24:25 INFO5 check_wapp_levels: WAPP power levels are between 0.137 and 1.172 (still bad) 2008-Apr-27 23:24:27 INFO5 check_wapp_levels: WAPP power levels are between 0.119 and 1.174 (still bad) 2008-Apr-27 23:24:29 INFO5 check_wapp_levels: WAPP power levels are between 0.114 and 1.175 (still bad) 2008-Apr-27 23:24:31 INFO5 check_wapp_levels: WAPP power levels are between 0.121 and 1.182 (still bad) 2008-Apr-27 23:24:33 INFO5 check_wapp_levels: WAPP power levels are between 0.131 and 1.185 (still bad) 2008-Apr-27 23:24:35 INFO5 check_wapp_levels: WAPP power levels are between 0.130 and 1.184 (still bad) 2008-Apr-27 23:24:37 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 23:24:37 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-27 23:24:37 LOG5 end_task: Level: (4) ID = <10185> Status = 0 0 0 0 ok 2008-Apr-27 23:24:37 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-27 23:24:37 LOG5 end_task: Level: (3) ID = <10184> Status = 0 0 0 0 ok 2008-Apr-27 23:24:37 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-27 23:24:37 LOG5 finish_task: Level: (2) ID = <10153> Status = 0 0 0 0 ok 2008-Apr-27 23:24:37 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-27 23:24:37 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-27 23:24:37 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-27 23:24:37 LOG5 end_task: Level: (2) ID = <10153> Status = 0 0 0 0 ok 2008-Apr-27 23:24:37 COMMAND run_command_line: EXECUTING command 51: 'FIXEDDRIFT az=47.62 alfaangle=-21.5 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p1_065 ra=122900.00 dec=72400.00' 2008-Apr-27 23:24:37 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-27 23:24:37 INFO5 check_wapp_levels: WAPP power levels are between 0.129 and 1.183 (still bad) 2008-Apr-27 23:24:37 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-27 23:24:37 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 47.62 -21.5 hcorcal 5 tracking no first 1 AGESVC1B_p1_065 122900.00 72400.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-27 23:24:37 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-27 23:24:38 LOG5 begin_task: Level: (2) ID = <10186> Status = 0 0 0 0 ok 2008-Apr-27 23:24:38 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGESVC1A_p2_046' 2008-Apr-27 23:24:38 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-27 23:24:38 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1B_p1_065} 2008-Apr-27 23:24:38 INFO3 fixed_driftmap: Sending telescope to Az = 47.62 and ZA = 15.87 2008-Apr-27 23:24:38 LOG3 track_source: Calling 'track_source AGESVC1B_p1_065 47.62 15.8685671812 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-27 23:24:38 START begin_task: Starting task 'sending tracking commands' 2008-Apr-27 23:24:38 LOG5 begin_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2008-Apr-27 23:24:38 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p1_065} INFO {Slewing to source 'AGESVC1B_p1_065' ...} 2008-Apr-27 23:24:38 INFO1 track_source: Starting to track AGESVC1B_p1_065 2008-Apr-27 23:24:38 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p1_065" 2008-Apr-27 23:24:38 LOG3 vw_send: To DATATAKING: set ra 47.62 2008-Apr-27 23:24:38 LOG3 vw_send: To DATATAKING: set dec 15.8685671812 2008-Apr-27 23:24:38 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-27 23:24:38 LOG3 vw_send: To DATATAKING: pnt tr 47.62 15.8685671812 -CF 2008-Apr-27 23:24:38 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 23:24:38 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-27 23:24:38 LOG5 finish_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2008-Apr-27 23:24:38 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-27 23:24:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 23:24:38 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-27 23:24:38 LOG5 end_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2008-Apr-27 23:24:38 START begin_task: Starting task 'rotate ALFA to -21.5 degrees' 2008-Apr-27 23:24:38 LOG5 begin_task: Level: (3) ID = <10188> Status = 0 0 0 0 ok 2008-Apr-27 23:24:38 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -21.5 degrees ...} 2008-Apr-27 23:24:38 INFO2 rotate_alfa: ALFA commanded to -21.5 degrees 2008-Apr-27 23:24:38 LOG3 sock_errsend: To ALFAMOTOR: POSITION -21.5 REPLY 2008-Apr-27 23:24:38 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-27 23:24:38 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-27 23:24:38 LOG5 begin_task: Level: (4) ID = <10189> Status = 0 0 0 0 ok 2008-Apr-27 23:24:38 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p1_065" 2008-Apr-27 23:24:38 LOG4 got_cormsg: From DATATAKING: set ra 47.62 2008-Apr-27 23:24:38 LOG4 got_cormsg: From DATATAKING: set dec 15.8685671812 2008-Apr-27 23:24:38 LOG4 got_cormsg: From DATATAKING: vw% 47.62 2008-Apr-27 23:24:38 LOG4 got_cormsg: From DATATAKING: vw% 15.8685671812 2008-Apr-27 23:24:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 23:24:38 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-27 23:24:38 LOG4 got_cormsg: From DATATAKING: pnt tr 47.62 15.8685671812 -CF 2008-Apr-27 23:24:38 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 23:24:38 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-27 23:24:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 23:24:39 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-27 23:24:39 INFO3 alfa_motor: ALFA rotator in-position -21.50 degrees 2008-Apr-27 23:24:39 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-27 23:24:39 LOG5 end_task: Level: (4) ID = <10189> Status = 0 0 0 0 ok 2008-Apr-27 23:24:39 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-27 23:24:39 STOP finish_task: Finishing task 'rotate ALFA to -21.5 degrees' 2008-Apr-27 23:24:39 LOG5 finish_task: Level: (3) ID = <10188> Status = 0 0 0 0 ok 2008-Apr-27 23:24:39 INFO2 finish_task: DONE finished configuration: rotating ALFA to -21.5 degrees 2008-Apr-27 23:24:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 23:24:40 STOP end_task: Finishing task 'rotate ALFA to -21.5 degrees' with status 'OK' 2008-Apr-27 23:24:40 LOG5 end_task: Level: (3) ID = <10188> Status = 0 0 0 0 ok 2008-Apr-27 23:24:40 START begin_task: Starting task 'waiting on telescope' 2008-Apr-27 23:24:40 LOG5 begin_task: Level: (3) ID = <10190> Status = 0 0 0 0 ok 2008-Apr-27 23:24:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-27 23:24:40 LOG3 waittrk: Start waittrk 5 2008-Apr-27 23:24:40 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-27 23:24:40 LOG5 begin_task: Level: (4) ID = <10191> Status = 0 0 0 0 ok 2008-Apr-27 23:24:45 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-27 23:24:45 LOG5 end_task: Level: (4) ID = <10191> Status = 0 0 0 0 ok 2008-Apr-27 23:24:45 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-27 23:24:45 LOG5 begin_task: Level: (4) ID = <10192> Status = 0 0 0 0 ok 2008-Apr-27 23:25:00 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-27 23:25:00 LOG5 end_task: Level: (4) ID = <10192> Status = 0 0 0 0 ok 2008-Apr-27 23:25:00 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-27 23:25:00 INFO2 waittrk: Now tracking AGESVC1B_p1_065 2008-Apr-27 23:25:00 LOG4 waittrk: Current telescope position: Az = 407.40 ZA = 15.86 2008-Apr-27 23:25:00 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-27 23:25:00 LOG5 finish_task: Level: (3) ID = <10190> Status = 0 0 0 0 ok 2008-Apr-27 23:25:00 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-27 23:25:00 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 23:25:00 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-27 23:25:00 LOG5 end_task: Level: (3) ID = <10190> Status = 0 0 0 0 ok 2008-Apr-27 23:25:00 START begin_task: Starting task 'selecting calibration type' 2008-Apr-27 23:25:00 LOG5 begin_task: Level: (3) ID = <10193> Status = 0 0 0 0 ok 2008-Apr-27 23:25:00 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-27 23:25:00 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-27 23:25:00 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 23:25:00 START begin_task: Starting task 'waiting on setcal' 2008-Apr-27 23:25:00 LOG5 begin_task: Level: (4) ID = <10194> Status = 0 0 0 0 ok 2008-Apr-27 23:25:00 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-27 23:25:00 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 23:25:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 23:25:01 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-27 23:25:01 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-27 23:25:01 LOG5 end_task: Level: (4) ID = <10194> Status = 0 0 0 0 ok 2008-Apr-27 23:25:01 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-27 23:25:01 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 23:25:01 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-27 23:25:01 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 23:25:01 LOG5 begin_task: Level: (4) ID = <10195> Status = 0 0 0 0 ok 2008-Apr-27 23:25:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 23:25:01 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 23:25:01 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 23:25:01 LOG5 end_task: Level: (4) ID = <10195> Status = 0 0 0 0 ok 2008-Apr-27 23:25:01 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 23:25:01 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-27 23:25:01 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 23:25:01 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-27 23:25:01 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 23:25:01 LOG5 begin_task: Level: (4) ID = <10196> Status = 0 0 0 0 ok 2008-Apr-27 23:25:02 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 23:25:02 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 23:25:02 LOG5 end_task: Level: (4) ID = <10196> Status = 0 0 0 0 ok 2008-Apr-27 23:25:02 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 23:25:02 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-27 23:25:02 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-27 23:25:02 LOG5 finish_task: Level: (3) ID = <10193> Status = 0 0 0 0 ok 2008-Apr-27 23:25:02 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-27 23:25:02 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 23:25:02 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-27 23:25:02 LOG5 end_task: Level: (3) ID = <10193> Status = 0 0 0 0 ok 2008-Apr-27 23:25:02 LOG5 dopset_later: Calling 'dopset_later 0' 2008-Apr-27 23:25:02 INFO3 dopset_later: Setting Doppler correction now 2008-Apr-27 23:25:02 LOG5 antvel: Calling 'antvel 47.620000 15.868567 F 0' 2008-Apr-27 23:25:02 LOG2 antvel: Parameters to Doppler: Heliocentric 98701 2008 118 0.0 2008-Apr-27 23:25:02 INFO5 antvel: Computed antenna velocity: +15.41347 km/s 2008-Apr-27 23:25:02 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=15.413465668000001 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-27 23:25:02 INFO4 dopset_gen: New sky frequencies: 1381.172417 1381.172417 1381.172417 1381.172417 1381.172417 1381.172417 1381.172417 1381.172417 1381.172417 2008-Apr-27 23:25:02 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.172417 sky0=1381.172417 sky1=1381.172417 sky2=1381.172417 sky3=1381.172417 sky4=1381.172417 sky5=1381.172417 sky6=1381.172417 sky7=1381.172417 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-27 23:25:02 LOG2 dopset_gen: Result from 'sky2syn': 1631.172417 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-27 23:25:02 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631172417.0} 2008-Apr-27 23:25:02 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 23:25:02 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-27 23:25:02 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-27 23:25:02 INFO5 fixed_driftmap: Tracking J2000 position: RA = 12:36:31.6 Dec = +07:23:49.8 2008-Apr-27 23:25:02 LOG3 track_source: Calling 'track_source AGESVC1B_p1_065 123631.6 072349.8 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-27 23:25:02 START begin_task: Starting task 'sending tracking commands' 2008-Apr-27 23:25:02 LOG5 begin_task: Level: (3) ID = <10197> Status = 0 0 0 0 ok 2008-Apr-27 23:25:02 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p1_065} INFO {Slewing to source 'AGESVC1B_p1_065' ...} 2008-Apr-27 23:25:02 INFO1 track_source: Starting to track AGESVC1B_p1_065 2008-Apr-27 23:25:02 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p1_065" 2008-Apr-27 23:25:02 LOG3 vw_send: To DATATAKING: set ra 123631.6 2008-Apr-27 23:25:02 LOG3 vw_send: To DATATAKING: set dec 072349.8 2008-Apr-27 23:25:02 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-27 23:25:02 LOG3 vw_send: To DATATAKING: pnt tr 123631.6 072349.8 -CJ 2008-Apr-27 23:25:02 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 23:25:02 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-27 23:25:02 LOG5 finish_task: Level: (3) ID = <10197> Status = 0 0 0 0 ok 2008-Apr-27 23:25:02 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-27 23:25:02 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 23:25:02 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-27 23:25:02 LOG5 end_task: Level: (3) ID = <10197> Status = 0 0 0 0 ok 2008-Apr-27 23:25:02 START begin_task: Starting task 'waiting on telescope' 2008-Apr-27 23:25:02 LOG5 begin_task: Level: (3) ID = <10198> Status = 0 0 0 0 ok 2008-Apr-27 23:25:02 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-27 23:25:02 LOG3 waittrk: Start waittrk 5 2008-Apr-27 23:25:02 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-27 23:25:02 LOG5 begin_task: Level: (4) ID = <10199> Status = 0 0 0 0 ok 2008-Apr-27 23:25:02 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631172417.0} 2008-Apr-27 23:25:02 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 23:25:02 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p1_065" 2008-Apr-27 23:25:02 LOG4 got_cormsg: From DATATAKING: set ra 123631.6 2008-Apr-27 23:25:02 LOG4 got_cormsg: From DATATAKING: set dec 072349.8 2008-Apr-27 23:25:02 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 123631.6 2008-Apr-27 23:25:02 LOG4 got_cormsg: From DATATAKING: vw% 072349.8 2008-Apr-27 23:25:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 23:25:02 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-27 23:25:02 LOG4 got_cormsg: From DATATAKING: pnt tr 123631.6 072349.8 -CJ 2008-Apr-27 23:25:02 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 23:25:02 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-27 23:25:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 23:25:07 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-27 23:25:07 LOG5 end_task: Level: (4) ID = <10199> Status = 0 0 0 0 ok 2008-Apr-27 23:25:07 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-27 23:25:07 LOG5 begin_task: Level: (4) ID = <10200> Status = 0 0 0 0 ok 2008-Apr-27 23:25:09 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-27 23:25:09 LOG5 end_task: Level: (4) ID = <10200> Status = 0 0 0 0 ok 2008-Apr-27 23:25:09 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-27 23:25:09 INFO2 waittrk: Now tracking AGESVC1B_p1_065 2008-Apr-27 23:25:09 LOG4 waittrk: Current telescope position: Az = 407.43 ZA = 15.87 2008-Apr-27 23:25:09 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-27 23:25:09 LOG5 finish_task: Level: (3) ID = <10198> Status = 0 0 0 0 ok 2008-Apr-27 23:25:09 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-27 23:25:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 23:25:09 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-27 23:25:09 LOG5 end_task: Level: (3) ID = <10198> Status = 0 0 0 0 ok 2008-Apr-27 23:25:09 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-27 23:25:09 LOG5 begin_task: Level: (3) ID = <10201> Status = 0 0 0 0 ok 2008-Apr-27 23:25:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-27 23:25:09 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-27 23:25:09 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-27 23:25:09 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-27 23:25:09 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 23:25:09 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-27 23:25:09 LOG5 begin_task: Level: (4) ID = <10202> Status = 0 0 0 0 ok 2008-Apr-27 23:25:09 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-27 23:25:09 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 23:25:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 23:25:10 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-27 23:25:10 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-27 23:25:10 LOG5 end_task: Level: (4) ID = <10202> Status = 0 0 0 0 ok 2008-Apr-27 23:25:10 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-27 23:25:10 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-27 23:25:10 LOG5 begin_task: Level: (4) ID = <10203> Status = 0 0 0 0 ok 2008-Apr-27 23:25:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-27 23:25:10 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-27 23:25:10 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-27 23:25:10 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-27 23:25:10 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-27 23:25:10 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-27 23:25:10 LOG5 begin_task: Level: (5) ID = <10204> Status = 0 0 0 0 ok 2008-Apr-27 23:25:10 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-27 23:25:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 23:25:10 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 0 dB --- beam 1: 8 7 dB 2008-Apr-27 23:25:10 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 6 dB 2008-Apr-27 23:25:10 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-27 23:25:10 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 3 3 dB 2008-Apr-27 23:25:10 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-27 23:25:10 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-27 23:25:10 LOG5 end_task: Level: (5) ID = <10204> Status = 0 0 0 0 ok 2008-Apr-27 23:25:10 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.950 0.809 ALFA beam 1: 0.918 0.903 2008-Apr-27 23:25:10 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.075 0.992 ALFA beam 3: 1.066 1.117 2008-Apr-27 23:25:10 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.986 1.019 ALFA beam 5: 1.084 0.939 2008-Apr-27 23:25:10 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.108 1.091 ALFA beam 7: 0.966 0.974 2008-Apr-27 23:25:10 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-27 23:25:10 LOG5 finish_task: Level: (4) ID = <10203> Status = 0 0 0 0 ok 2008-Apr-27 23:25:10 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-27 23:25:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 23:25:10 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-27 23:25:10 LOG5 end_task: Level: (4) ID = <10203> Status = 0 0 0 0 ok 2008-Apr-27 23:25:10 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-27 23:25:10 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-27 23:25:10 LOG5 finish_task: Level: (3) ID = <10201> Status = 0 0 0 0 ok 2008-Apr-27 23:25:10 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-27 23:25:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 23:25:10 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-27 23:25:10 LOG5 end_task: Level: (3) ID = <10201> Status = 0 0 0 0 ok 2008-Apr-27 23:25:10 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 ss 2008-Apr-27 23:25:10 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 ss 2008-Apr-27 23:25:11 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 ss 2008-Apr-27 23:25:11 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 ss 2008-Apr-27 23:25:11 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-27 23:25:11 START begin_task: Starting task 'WAPP calibration' 2008-Apr-27 23:25:11 LOG5 begin_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2008-Apr-27 23:25:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-27 23:25:11 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-27 23:25:11 START begin_task: Starting task 'selecting calibration type' 2008-Apr-27 23:25:11 LOG5 begin_task: Level: (4) ID = <10206> Status = 0 0 0 0 ok 2008-Apr-27 23:25:11 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-27 23:25:11 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-27 23:25:11 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 23:25:11 START begin_task: Starting task 'waiting on setcal' 2008-Apr-27 23:25:11 LOG5 begin_task: Level: (5) ID = <10207> Status = 0 0 0 0 ok 2008-Apr-27 23:25:11 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 ss' 2008-Apr-27 23:25:11 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-27 23:25:11 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 23:25:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 23:25:11 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-27 23:25:11 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-27 23:25:11 LOG5 end_task: Level: (5) ID = <10207> Status = 0 0 0 0 ok 2008-Apr-27 23:25:11 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-27 23:25:11 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 23:25:11 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-27 23:25:11 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 23:25:11 LOG5 begin_task: Level: (5) ID = <10208> Status = 0 0 0 0 ok 2008-Apr-27 23:25:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 23:25:11 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 23:25:11 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 23:25:11 LOG5 end_task: Level: (5) ID = <10208> Status = 0 0 0 0 ok 2008-Apr-27 23:25:11 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 23:25:11 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-27 23:25:11 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 23:25:11 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-27 23:25:11 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 23:25:11 LOG5 begin_task: Level: (5) ID = <10209> Status = 0 0 0 0 ok 2008-Apr-27 23:25:11 NOTE WAPPDATA-new_file: New FITS file: wapp.20080427.a2048.0010.fits 2008-Apr-27 23:25:11 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 23:25:11 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 23:25:11 LOG5 end_task: Level: (5) ID = <10209> Status = 0 0 0 0 ok 2008-Apr-27 23:25:11 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 23:25:11 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-27 23:25:11 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-27 23:25:11 LOG5 finish_task: Level: (4) ID = <10206> Status = 0 0 0 0 ok 2008-Apr-27 23:25:11 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-27 23:25:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 23:25:11 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-27 23:25:11 LOG5 end_task: Level: (4) ID = <10206> Status = 0 0 0 0 ok 2008-Apr-27 23:25:11 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-27 23:25:11 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-27 23:25:11 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-27 23:25:11 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-27 23:25:11 LOG5 begin_task: Level: (4) ID = <10210> Status = 0 0 0 0 ok 2008-Apr-27 23:25:11 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080427.a2048.0010.fits} 2008-Apr-27 23:25:11 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-27 23:25:11 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-27 23:25:11 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-27 23:25:11 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-27 23:25:11 LOG5 end_task: Level: (4) ID = <10210> Status = 0 0 0 0 ok 2008-Apr-27 23:25:11 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-27 23:25:11 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-27 23:25:11 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-27 23:25:11 LOG5 begin_task: Level: (4) ID = <10211> Status = 0 0 0 0 ok 2008-Apr-27 23:25:11 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-27 23:25:11 LOG5 log_alfabeam: Parameters: 12.60877777777778 7.397166666666668 13.401169 2008.3257380472533 -21.500038 2008-Apr-27 23:25:11 LOG4 log_alfabeam: ALFABEAM 0 12.608777777777778 7.397166666666659 2008-Apr-27 23:25:11 LOG4 log_alfabeam: ALFABEAM 1 12.608562044880820 7.494610792677769 2008-Apr-27 23:25:11 LOG4 log_alfabeam: ALFABEAM 2 12.602879494778186 7.430045232592969 2008-Apr-27 23:25:11 LOG4 log_alfabeam: ALFABEAM 3 12.603112932507321 7.332270652462333 2008-Apr-27 23:25:11 LOG4 log_alfabeam: ALFABEAM 4 12.609035996546005 7.299531810196918 2008-Apr-27 23:25:11 LOG4 log_alfabeam: ALFABEAM 5 12.614676932696620 7.364872500240358 2008-Apr-27 23:25:11 LOG4 log_alfabeam: ALFABEAM 6 12.614436522582762 7.462178237261079 2008-Apr-27 23:25:11 INFO2 take_spectra: Starting WAPP scan: 811800116 2008-Apr-27 23:25:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-27 23:25:12 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-27 23:25:12 LOG5 begin_task: Level: (5) ID = <10212> Status = 0 0 0 0 ok 2008-Apr-27 23:25:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 23:25:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12313.00 2008-Apr-27 23:25:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.172417 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 23:25:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.172417 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 23:25:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.172417 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 23:25:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.172417 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-27 23:25:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.172417 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 23:25:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.514 > 1.4)! 2008-Apr-27 23:25:18 LOG4 check_wapp_levels: WAPP-1 power levels: 1.285 0.806 1.229 1.219 2008-Apr-27 23:25:18 LOG4 check_wapp_levels: WAPP-2 power levels: 1.447 1.354 1.445 1.505 2008-Apr-27 23:25:18 LOG4 check_wapp_levels: WAPP-3 power levels: 1.350 1.395 1.486 1.245 2008-Apr-27 23:25:18 LOG4 check_wapp_levels: WAPP-4 power levels: 1.514 1.497 1.320 1.335 2008-Apr-27 23:25:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.172417 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-27 23:25:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.172417 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-27 23:25:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.172417 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-27 23:25:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.172417 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-27 23:25:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 23:25:18 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-27 23:25:18 LOG5 end_task: Level: (5) ID = <10212> Status = 0 0 0 0 ok 2008-Apr-27 23:25:18 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-27 23:25:18 LOG5 end_task: Level: (4) ID = <10211> Status = 0 0 0 0 ok 2008-Apr-27 23:25:18 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-27 23:25:18 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-27 23:25:18 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-27 23:25:18 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-27 23:25:18 LOG5 begin_task: Level: (4) ID = <10213> Status = 0 0 0 0 ok 2008-Apr-27 23:25:18 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-27 23:25:18 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-27 23:25:18 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-27 23:25:18 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-27 23:25:18 LOG5 end_task: Level: (4) ID = <10213> Status = 0 0 0 0 ok 2008-Apr-27 23:25:18 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-27 23:25:18 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-27 23:25:18 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-27 23:25:18 LOG5 begin_task: Level: (4) ID = <10214> Status = 0 0 0 0 ok 2008-Apr-27 23:25:18 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-27 23:25:18 LOG5 log_alfabeam: Parameters: 12.60877777777778 7.397166666666668 13.403118 2008.3257382690699 -21.500038 2008-Apr-27 23:25:18 LOG4 log_alfabeam: ALFABEAM 0 12.608777777777780 7.397166666666664 2008-Apr-27 23:25:18 LOG4 log_alfabeam: ALFABEAM 1 12.608569806858611 7.494614671187927 2008-Apr-27 23:25:18 LOG4 log_alfabeam: ALFABEAM 2 12.602882125191835 7.430149121661706 2008-Apr-27 23:25:18 LOG4 log_alfabeam: ALFABEAM 3 12.603107754575907 7.332370801580523 2008-Apr-27 23:25:18 LOG4 log_alfabeam: ALFABEAM 4 12.609028164863822 7.299527440598825 2008-Apr-27 23:25:18 LOG4 log_alfabeam: ALFABEAM 5 12.614674345552299 7.364767777296149 2008-Apr-27 23:25:18 LOG4 log_alfabeam: ALFABEAM 6 12.614441720538917 7.462078016845250 2008-Apr-27 23:25:18 INFO2 take_spectra: Starting WAPP scan: 811800117 2008-Apr-27 23:25:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-27 23:25:19 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-27 23:25:19 LOG5 begin_task: Level: (5) ID = <10215> Status = 0 0 0 0 ok 2008-Apr-27 23:25:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 23:25:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12320.00 2008-Apr-27 23:25:24 INFO5 check_wapp_levels: WAPP power levels are between 0.806 and 1.514 (still bad) 2008-Apr-27 23:25:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.172417 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 23:25:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.172417 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 23:25:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.172417 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 23:25:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.172417 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-27 23:25:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.172417 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 23:25:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.172417 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-27 23:25:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.172417 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-27 23:25:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.172417 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-27 23:25:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.172417 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-27 23:25:25 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-27 23:25:25 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 23:25:25 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-27 23:25:25 LOG5 end_task: Level: (5) ID = <10215> Status = 0 0 0 0 ok 2008-Apr-27 23:25:25 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-27 23:25:25 LOG5 end_task: Level: (4) ID = <10214> Status = 0 0 0 0 ok 2008-Apr-27 23:25:25 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-27 23:25:25 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-27 23:25:25 LOG5 finish_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2008-Apr-27 23:25:25 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-27 23:25:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 23:25:25 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-27 23:25:25 LOG5 end_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2008-Apr-27 23:25:25 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-27 23:25:25 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 47.62 and ZA = 15.87 2008-Apr-27 23:25:25 LOG3 track_source: Calling 'track_source AGESVC1B_p1_065 47.62 15.8685671812 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-27 23:25:25 START begin_task: Starting task 'sending tracking commands' 2008-Apr-27 23:25:25 LOG5 begin_task: Level: (3) ID = <10216> Status = 0 0 0 0 ok 2008-Apr-27 23:25:25 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p1_065} INFO {Slewing to source 'AGESVC1B_p1_065' ...} 2008-Apr-27 23:25:25 INFO1 track_source: Starting to track AGESVC1B_p1_065 2008-Apr-27 23:25:25 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p1_065" 2008-Apr-27 23:25:25 LOG3 vw_send: To DATATAKING: set ra 47.62 2008-Apr-27 23:25:25 LOG3 vw_send: To DATATAKING: set dec 15.8685671812 2008-Apr-27 23:25:25 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-27 23:25:25 LOG3 vw_send: To DATATAKING: pnt tr 47.62 15.8685671812 -CF 2008-Apr-27 23:25:25 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 23:25:25 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-27 23:25:25 LOG5 finish_task: Level: (3) ID = <10216> Status = 0 0 0 0 ok 2008-Apr-27 23:25:25 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-27 23:25:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 23:25:26 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-27 23:25:26 LOG5 end_task: Level: (3) ID = <10216> Status = 0 0 0 0 ok 2008-Apr-27 23:25:26 LOG1 fixed_driftmap: Parameters: HA = +00:47:00.2 Start = 13:16:27.3 LST = 13:24:18.2 diff = -470.9 secs 2008-Apr-27 23:25:26 WARNING fixed_driftmap: WARNING RA has already passed --- starting anyway! 2008-Apr-27 23:25:26 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-27 23:25:26 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-27 23:25:26 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-27 23:25:26 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-27 23:25:26 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-27 23:25:26 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-27 23:25:26 LOG5 begin_task: Level: (3) ID = <10217> Status = 0 0 0 0 ok 2008-Apr-27 23:25:26 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-27 23:25:26 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-27 23:25:26 INFO2 take_spectra: Starting WAPP scan: 811800118 2008-Apr-27 23:25:26 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-27 23:25:26 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-27 23:25:26 LOG5 begin_task: Level: (4) ID = <10218> Status = 0 0 0 0 ok 2008-Apr-27 23:25:26 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 23:25:26 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p1_065" 2008-Apr-27 23:25:26 LOG4 got_cormsg: From DATATAKING: set ra 47.62 2008-Apr-27 23:25:26 LOG4 got_cormsg: From DATATAKING: set dec 15.8685671812 2008-Apr-27 23:25:26 LOG4 got_cormsg: From DATATAKING: vw% 47.62 2008-Apr-27 23:25:26 LOG4 got_cormsg: From DATATAKING: vw% 15.8685671812 2008-Apr-27 23:25:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 23:25:26 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-27 23:25:26 LOG4 got_cormsg: From DATATAKING: pnt tr 47.62 15.8685671812 -CF 2008-Apr-27 23:25:26 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-27 23:25:26 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-27 23:25:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 23:25:26 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12327.00 2008-Apr-27 23:25:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.172417 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 23:25:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.172417 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 23:25:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.172417 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 23:25:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.172417 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-27 23:25:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.172417 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 23:25:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.172417 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Apr-27 23:25:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.172417 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Apr-27 23:25:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.172417 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Apr-27 23:25:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.172417 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Apr-27 23:25:30 WARNING WAPP=1+2+3+4-start_spectra: WARNING observing when not on source 2008-Apr-27 23:25:30 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.892 and 1.121 2008-Apr-27 23:25:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.767 < 0.8)! 2008-Apr-27 23:25:36 LOG4 check_wapp_levels: WAPP-1 power levels: 0.947 0.767 0.924 0.905 2008-Apr-27 23:25:36 LOG4 check_wapp_levels: WAPP-2 power levels: 1.068 0.987 1.066 1.113 2008-Apr-27 23:25:36 LOG4 check_wapp_levels: WAPP-3 power levels: 0.983 1.016 1.089 0.940 2008-Apr-27 23:25:36 LOG4 check_wapp_levels: WAPP-4 power levels: 1.107 1.090 0.964 0.973 2008-Apr-27 23:25:37 NOTE WAPP=1+2+3+4-start_spectra: Observing now on source 2008-Apr-27 23:25:38 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.908 and 1.114 2008-Apr-27 23:25:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.626 < 0.8)! 2008-Apr-27 23:25:52 LOG4 check_wapp_levels: WAPP-1 power levels: 0.947 0.626 0.923 0.905 2008-Apr-27 23:25:52 LOG4 check_wapp_levels: WAPP-2 power levels: 1.069 0.986 1.065 1.114 2008-Apr-27 23:25:52 LOG4 check_wapp_levels: WAPP-3 power levels: 0.983 1.014 1.098 0.948 2008-Apr-27 23:25:52 LOG4 check_wapp_levels: WAPP-4 power levels: 1.105 1.091 0.963 0.973 2008-Apr-27 23:25:54 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.905 and 1.114 2008-Apr-27 23:26:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.738 < 0.8)! 2008-Apr-27 23:26:00 LOG4 check_wapp_levels: WAPP-1 power levels: 0.947 0.738 0.921 0.903 2008-Apr-27 23:26:00 LOG4 check_wapp_levels: WAPP-2 power levels: 1.069 0.986 1.064 1.114 2008-Apr-27 23:26:00 LOG4 check_wapp_levels: WAPP-3 power levels: 0.983 1.015 1.101 0.955 2008-Apr-27 23:26:00 LOG4 check_wapp_levels: WAPP-4 power levels: 1.109 1.094 0.968 0.978 2008-Apr-27 23:26:02 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.903 and 1.133 2008-Apr-27 23:26:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.736 < 0.8)! 2008-Apr-27 23:26:21 LOG4 check_wapp_levels: WAPP-1 power levels: 0.953 0.736 0.917 0.904 2008-Apr-27 23:26:21 LOG4 check_wapp_levels: WAPP-2 power levels: 1.068 0.986 1.064 1.114 2008-Apr-27 23:26:21 LOG4 check_wapp_levels: WAPP-3 power levels: 0.983 1.015 1.134 0.982 2008-Apr-27 23:26:21 LOG4 check_wapp_levels: WAPP-4 power levels: 1.109 1.096 0.966 0.977 2008-Apr-27 23:26:23 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.902 and 1.118 2008-Apr-27 23:26:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.782 < 0.8)! 2008-Apr-27 23:26:27 LOG4 check_wapp_levels: WAPP-1 power levels: 0.964 0.782 0.923 0.905 2008-Apr-27 23:26:27 LOG4 check_wapp_levels: WAPP-2 power levels: 1.069 0.986 1.063 1.114 2008-Apr-27 23:26:27 LOG4 check_wapp_levels: WAPP-3 power levels: 0.983 1.014 1.096 0.946 2008-Apr-27 23:26:27 LOG4 check_wapp_levels: WAPP-4 power levels: 1.107 1.093 0.963 0.976 2008-Apr-27 23:26:29 INFO5 check_wapp_levels: WAPP power levels are between 0.696 and 1.114 (still bad) 2008-Apr-27 23:26:31 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.907 and 1.171 2008-Apr-27 23:26:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.756 < 0.8)! 2008-Apr-27 23:26:49 LOG4 check_wapp_levels: WAPP-1 power levels: 0.960 0.756 0.920 0.905 2008-Apr-27 23:26:49 LOG4 check_wapp_levels: WAPP-2 power levels: 1.076 0.992 1.072 1.122 2008-Apr-27 23:26:49 LOG4 check_wapp_levels: WAPP-3 power levels: 0.982 1.012 1.087 0.937 2008-Apr-27 23:26:49 LOG4 check_wapp_levels: WAPP-4 power levels: 1.103 1.091 0.961 0.974 2008-Apr-27 23:26:51 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.876 and 1.122 2008-Apr-27 23:27:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.642 < 0.8)! 2008-Apr-27 23:27:11 LOG4 check_wapp_levels: WAPP-1 power levels: 0.948 0.642 0.920 0.904 2008-Apr-27 23:27:11 LOG4 check_wapp_levels: WAPP-2 power levels: 1.070 0.990 1.071 1.121 2008-Apr-27 23:27:11 LOG4 check_wapp_levels: WAPP-3 power levels: 0.980 1.013 1.088 0.935 2008-Apr-27 23:27:11 LOG4 check_wapp_levels: WAPP-4 power levels: 1.108 1.096 0.965 0.979 2008-Apr-27 23:27:13 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.904 and 1.120 2008-Apr-27 23:27:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.772 < 0.8)! 2008-Apr-27 23:27:37 LOG4 check_wapp_levels: WAPP-1 power levels: 0.946 0.772 0.921 0.909 2008-Apr-27 23:27:37 LOG4 check_wapp_levels: WAPP-2 power levels: 1.068 0.985 1.065 1.114 2008-Apr-27 23:27:37 LOG4 check_wapp_levels: WAPP-3 power levels: 0.982 1.014 1.086 0.937 2008-Apr-27 23:27:37 LOG4 check_wapp_levels: WAPP-4 power levels: 1.154 1.144 1.006 1.022 2008-Apr-27 23:27:39 INFO5 check_wapp_levels: WAPP power levels are between 0.631 and 1.150 (still bad) 2008-Apr-27 23:27:41 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.823 and 1.141 2008-Apr-27 23:27:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.702 < 0.8)! 2008-Apr-27 23:27:58 LOG4 check_wapp_levels: WAPP-1 power levels: 0.952 0.702 1.031 1.010 2008-Apr-27 23:27:58 LOG4 check_wapp_levels: WAPP-2 power levels: 1.066 0.985 1.065 1.114 2008-Apr-27 23:27:58 LOG4 check_wapp_levels: WAPP-3 power levels: 0.983 1.015 1.086 0.937 2008-Apr-27 23:27:58 LOG4 check_wapp_levels: WAPP-4 power levels: 1.104 1.093 0.963 0.976 2008-Apr-27 23:28:00 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.937 and 1.114 2008-Apr-27 23:28:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.660 < 0.8)! 2008-Apr-27 23:28:06 LOG4 check_wapp_levels: WAPP-1 power levels: 0.950 0.660 1.004 0.990 2008-Apr-27 23:28:06 LOG4 check_wapp_levels: WAPP-2 power levels: 1.070 0.984 1.065 1.114 2008-Apr-27 23:28:06 LOG4 check_wapp_levels: WAPP-3 power levels: 0.982 1.014 1.084 0.937 2008-Apr-27 23:28:06 LOG4 check_wapp_levels: WAPP-4 power levels: 1.103 1.090 0.962 0.974 2008-Apr-27 23:28:08 INFO5 check_wapp_levels: WAPP power levels are between 0.747 and 1.114 (still bad) 2008-Apr-27 23:28:10 INFO5 check_wapp_levels: WAPP power levels are between 0.749 and 1.113 (still bad) 2008-Apr-27 23:28:12 INFO5 check_wapp_levels: WAPP power levels are between 0.745 and 1.114 (still bad) 2008-Apr-27 23:28:14 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.908 and 1.114 2008-Apr-27 23:28:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.769 < 0.8)! 2008-Apr-27 23:28:50 LOG4 check_wapp_levels: WAPP-1 power levels: 0.945 0.769 0.919 0.901 2008-Apr-27 23:28:50 LOG4 check_wapp_levels: WAPP-2 power levels: 1.071 0.990 1.064 1.114 2008-Apr-27 23:28:50 LOG4 check_wapp_levels: WAPP-3 power levels: 0.984 1.014 1.087 0.936 2008-Apr-27 23:28:50 LOG4 check_wapp_levels: WAPP-4 power levels: 1.104 1.089 0.962 0.973 2008-Apr-27 23:28:52 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.804 and 1.114 2008-Apr-27 23:29:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.745 < 0.8)! 2008-Apr-27 23:29:02 LOG4 check_wapp_levels: WAPP-1 power levels: 0.950 0.745 0.922 0.902 2008-Apr-27 23:29:02 LOG4 check_wapp_levels: WAPP-2 power levels: 1.069 0.987 1.064 1.114 2008-Apr-27 23:29:02 LOG4 check_wapp_levels: WAPP-3 power levels: 0.984 1.014 1.086 0.936 2008-Apr-27 23:29:02 LOG4 check_wapp_levels: WAPP-4 power levels: 1.105 1.089 0.962 0.973 2008-Apr-27 23:29:04 INFO5 check_wapp_levels: WAPP power levels are between 0.763 and 1.115 (still bad) 2008-Apr-27 23:29:07 INFO5 check_wapp_levels: WAPP power levels are between 0.684 and 1.114 (still bad) 2008-Apr-27 23:29:09 INFO5 check_wapp_levels: WAPP power levels are between 0.703 and 1.114 (still bad) 2008-Apr-27 23:29:11 INFO5 check_wapp_levels: WAPP power levels are between 0.702 and 1.114 (still bad) 2008-Apr-27 23:29:13 INFO5 check_wapp_levels: WAPP power levels are between 0.729 and 1.114 (still bad) 2008-Apr-27 23:29:15 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.884 and 1.113 2008-Apr-27 23:29:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.749 < 0.8)! 2008-Apr-27 23:29:33 LOG4 check_wapp_levels: WAPP-1 power levels: 0.946 0.749 0.916 0.900 2008-Apr-27 23:29:33 LOG4 check_wapp_levels: WAPP-2 power levels: 1.066 0.986 1.064 1.114 2008-Apr-27 23:29:33 LOG4 check_wapp_levels: WAPP-3 power levels: 0.983 1.015 1.087 0.939 2008-Apr-27 23:29:33 LOG4 check_wapp_levels: WAPP-4 power levels: 1.105 1.089 0.962 0.972 2008-Apr-27 23:29:35 INFO5 check_wapp_levels: WAPP power levels are between 0.779 and 1.113 (still bad) 2008-Apr-27 23:29:37 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.846 and 1.113 2008-Apr-27 23:29:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.798 < 0.8)! 2008-Apr-27 23:29:43 LOG4 check_wapp_levels: WAPP-1 power levels: 0.950 0.798 0.923 0.902 2008-Apr-27 23:29:43 LOG4 check_wapp_levels: WAPP-2 power levels: 1.065 0.984 1.063 1.113 2008-Apr-27 23:29:43 LOG4 check_wapp_levels: WAPP-3 power levels: 0.986 1.016 1.088 0.939 2008-Apr-27 23:29:43 LOG4 check_wapp_levels: WAPP-4 power levels: 1.105 1.087 0.963 0.972 2008-Apr-27 23:29:45 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.902 and 1.112 2008-Apr-27 23:29:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.697 < 0.8)! 2008-Apr-27 23:29:49 LOG4 check_wapp_levels: WAPP-1 power levels: 0.951 0.697 0.924 0.901 2008-Apr-27 23:29:49 LOG4 check_wapp_levels: WAPP-2 power levels: 1.065 0.985 1.063 1.112 2008-Apr-27 23:29:49 LOG4 check_wapp_levels: WAPP-3 power levels: 0.993 1.022 1.085 0.938 2008-Apr-27 23:29:49 LOG4 check_wapp_levels: WAPP-4 power levels: 1.105 1.088 0.963 0.973 2008-Apr-27 23:29:51 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.874 and 1.113 2008-Apr-27 23:29:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.559 < 0.8)! 2008-Apr-27 23:29:53 LOG4 check_wapp_levels: WAPP-1 power levels: 0.947 0.559 0.920 0.900 2008-Apr-27 23:29:53 LOG4 check_wapp_levels: WAPP-2 power levels: 1.064 0.985 1.062 1.113 2008-Apr-27 23:29:53 LOG4 check_wapp_levels: WAPP-3 power levels: 1.004 1.037 1.084 0.937 2008-Apr-27 23:29:53 LOG4 check_wapp_levels: WAPP-4 power levels: 1.104 1.088 0.962 0.972 2008-Apr-27 23:29:55 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.901 and 1.112 2008-Apr-27 23:30:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.743 < 0.8)! 2008-Apr-27 23:30:01 LOG4 check_wapp_levels: WAPP-1 power levels: 0.949 0.743 0.921 0.901 2008-Apr-27 23:30:01 LOG4 check_wapp_levels: WAPP-2 power levels: 1.063 0.984 1.063 1.113 2008-Apr-27 23:30:01 LOG4 check_wapp_levels: WAPP-3 power levels: 1.004 1.035 1.086 0.937 2008-Apr-27 23:30:01 LOG4 check_wapp_levels: WAPP-4 power levels: 1.104 1.088 0.962 0.972 2008-Apr-27 23:30:03 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.819 and 1.113 2008-Apr-27 23:30:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.677 < 0.8)! 2008-Apr-27 23:30:11 LOG4 check_wapp_levels: WAPP-1 power levels: 0.948 0.677 0.922 0.901 2008-Apr-27 23:30:11 LOG4 check_wapp_levels: WAPP-2 power levels: 1.066 0.984 1.070 1.118 2008-Apr-27 23:30:11 LOG4 check_wapp_levels: WAPP-3 power levels: 0.984 1.015 1.088 0.936 2008-Apr-27 23:30:11 LOG4 check_wapp_levels: WAPP-4 power levels: 1.108 1.092 0.966 0.974 2008-Apr-27 23:30:13 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.900 and 1.121 2008-Apr-27 23:30:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.703 < 0.8)! 2008-Apr-27 23:30:34 LOG4 check_wapp_levels: WAPP-1 power levels: 0.951 0.703 0.921 0.901 2008-Apr-27 23:30:34 LOG4 check_wapp_levels: WAPP-2 power levels: 1.067 0.986 1.066 1.115 2008-Apr-27 23:30:34 LOG4 check_wapp_levels: WAPP-3 power levels: 0.983 1.012 1.089 0.938 2008-Apr-27 23:30:34 LOG4 check_wapp_levels: WAPP-4 power levels: 1.104 1.086 0.963 0.971 2008-Apr-27 23:30:36 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.901 and 1.116 2008-Apr-27 23:31:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.676 < 0.8)! 2008-Apr-27 23:31:04 LOG4 check_wapp_levels: WAPP-1 power levels: 0.946 0.676 0.914 0.899 2008-Apr-27 23:31:04 LOG4 check_wapp_levels: WAPP-2 power levels: 1.065 0.984 1.065 1.113 2008-Apr-27 23:31:04 LOG4 check_wapp_levels: WAPP-3 power levels: 0.980 1.009 1.087 0.934 2008-Apr-27 23:31:04 LOG4 check_wapp_levels: WAPP-4 power levels: 1.103 1.089 0.961 0.971 2008-Apr-27 23:31:06 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.834 and 1.113 2008-Apr-27 23:31:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.694 < 0.8)! 2008-Apr-27 23:31:38 LOG4 check_wapp_levels: WAPP-1 power levels: 0.949 0.694 0.921 0.901 2008-Apr-27 23:31:38 LOG4 check_wapp_levels: WAPP-2 power levels: 1.066 0.981 1.064 1.112 2008-Apr-27 23:31:38 LOG4 check_wapp_levels: WAPP-3 power levels: 0.980 1.009 1.088 0.933 2008-Apr-27 23:31:38 LOG4 check_wapp_levels: WAPP-4 power levels: 1.102 1.089 0.962 0.972 2008-Apr-27 23:31:40 INFO5 check_wapp_levels: WAPP power levels are between 0.689 and 1.112 (still bad) 2008-Apr-27 23:31:42 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.901 and 1.113 2008-Apr-27 23:31:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.723 < 0.8)! 2008-Apr-27 23:31:50 LOG4 check_wapp_levels: WAPP-1 power levels: 0.948 0.723 0.923 0.901 2008-Apr-27 23:31:50 LOG4 check_wapp_levels: WAPP-2 power levels: 1.067 0.981 1.065 1.112 2008-Apr-27 23:31:50 LOG4 check_wapp_levels: WAPP-3 power levels: 0.981 1.009 1.086 0.934 2008-Apr-27 23:31:50 LOG4 check_wapp_levels: WAPP-4 power levels: 1.103 1.090 0.962 0.973 2008-Apr-27 23:31:52 INFO5 check_wapp_levels: WAPP power levels are between 0.763 and 1.112 (still bad) 2008-Apr-27 23:31:54 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.899 and 1.112 2008-Apr-27 23:32:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.591 < 0.8)! 2008-Apr-27 23:32:07 LOG4 check_wapp_levels: WAPP-1 power levels: 0.949 0.591 0.919 0.899 2008-Apr-27 23:32:07 LOG4 check_wapp_levels: WAPP-2 power levels: 1.065 0.983 1.064 1.112 2008-Apr-27 23:32:07 LOG4 check_wapp_levels: WAPP-3 power levels: 0.979 1.009 1.088 0.934 2008-Apr-27 23:32:07 LOG4 check_wapp_levels: WAPP-4 power levels: 1.103 1.089 0.961 0.971 2008-Apr-27 23:32:09 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.832 and 1.111 2008-Apr-27 23:32:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.798 < 0.8)! 2008-Apr-27 23:32:35 LOG4 check_wapp_levels: WAPP-1 power levels: 0.950 0.798 0.918 0.899 2008-Apr-27 23:32:35 LOG4 check_wapp_levels: WAPP-2 power levels: 1.066 0.982 1.061 1.111 2008-Apr-27 23:32:35 LOG4 check_wapp_levels: WAPP-3 power levels: 0.980 1.010 1.088 0.936 2008-Apr-27 23:32:35 LOG4 check_wapp_levels: WAPP-4 power levels: 1.110 1.096 0.967 0.978 2008-Apr-27 23:32:37 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.900 and 1.112 2008-Apr-27 23:33:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.754 < 0.8)! 2008-Apr-27 23:33:32 LOG4 check_wapp_levels: WAPP-1 power levels: 0.948 0.754 0.920 0.898 2008-Apr-27 23:33:32 LOG4 check_wapp_levels: WAPP-2 power levels: 1.065 0.985 1.066 1.115 2008-Apr-27 23:33:32 LOG4 check_wapp_levels: WAPP-3 power levels: 0.980 1.011 1.084 0.935 2008-Apr-27 23:33:32 LOG4 check_wapp_levels: WAPP-4 power levels: 1.111 1.096 0.968 0.979 2008-Apr-27 23:33:34 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.811 and 1.113 2008-Apr-27 23:33:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.636 < 0.8)! 2008-Apr-27 23:33:38 LOG4 check_wapp_levels: WAPP-1 power levels: 0.948 0.636 0.922 0.902 2008-Apr-27 23:33:38 LOG4 check_wapp_levels: WAPP-2 power levels: 1.068 0.987 1.064 1.111 2008-Apr-27 23:33:38 LOG4 check_wapp_levels: WAPP-3 power levels: 0.981 1.013 1.085 0.936 2008-Apr-27 23:33:38 LOG4 check_wapp_levels: WAPP-4 power levels: 1.109 1.093 0.965 0.976 2008-Apr-27 23:33:40 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.901 and 1.111 2008-Apr-27 23:34:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.683 < 0.8)! 2008-Apr-27 23:34:08 LOG4 check_wapp_levels: WAPP-1 power levels: 0.950 0.683 0.922 0.901 2008-Apr-27 23:34:08 LOG4 check_wapp_levels: WAPP-2 power levels: 1.068 0.987 1.059 1.112 2008-Apr-27 23:34:08 LOG4 check_wapp_levels: WAPP-3 power levels: 0.984 1.012 1.122 0.967 2008-Apr-27 23:34:08 LOG4 check_wapp_levels: WAPP-4 power levels: 1.106 1.090 0.962 0.974 2008-Apr-27 23:34:10 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.900 and 1.114 2008-Apr-27 23:35:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.799 < 0.8)! 2008-Apr-27 23:35:15 LOG4 check_wapp_levels: WAPP-1 power levels: 0.948 0.799 0.931 0.910 2008-Apr-27 23:35:15 LOG4 check_wapp_levels: WAPP-2 power levels: 1.068 0.987 1.062 1.115 2008-Apr-27 23:35:15 LOG4 check_wapp_levels: WAPP-3 power levels: 0.981 1.011 1.086 0.937 2008-Apr-27 23:35:15 LOG4 check_wapp_levels: WAPP-4 power levels: 1.104 1.091 0.962 0.974 2008-Apr-27 23:35:17 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.904 and 1.114 2008-Apr-27 23:35:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.793 < 0.8)! 2008-Apr-27 23:35:21 LOG4 check_wapp_levels: WAPP-1 power levels: 0.950 0.793 0.917 0.902 2008-Apr-27 23:35:21 LOG4 check_wapp_levels: WAPP-2 power levels: 1.071 0.989 1.062 1.114 2008-Apr-27 23:35:21 LOG4 check_wapp_levels: WAPP-3 power levels: 0.979 1.012 1.086 0.935 2008-Apr-27 23:35:21 LOG4 check_wapp_levels: WAPP-4 power levels: 1.105 1.091 0.963 0.975 2008-Apr-27 23:35:23 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.900 and 1.114 2008-Apr-27 23:35:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.676 < 0.8)! 2008-Apr-27 23:35:27 LOG4 check_wapp_levels: WAPP-1 power levels: 0.948 0.676 0.916 0.898 2008-Apr-27 23:35:27 LOG4 check_wapp_levels: WAPP-2 power levels: 1.070 0.988 1.060 1.114 2008-Apr-27 23:35:27 LOG4 check_wapp_levels: WAPP-3 power levels: 0.980 1.011 1.086 0.935 2008-Apr-27 23:35:27 LOG4 check_wapp_levels: WAPP-4 power levels: 1.106 1.094 0.965 0.977 2008-Apr-27 23:35:29 INFO5 check_wapp_levels: WAPP power levels are between 0.638 and 1.113 (still bad) 2008-Apr-27 23:35:31 INFO5 check_wapp_levels: WAPP power levels are between 0.755 and 1.113 (still bad) 2008-Apr-27 23:35:33 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.814 and 1.113 2008-Apr-27 23:35:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.619 < 0.8)! 2008-Apr-27 23:35:35 LOG4 check_wapp_levels: WAPP-1 power levels: 0.949 0.619 0.912 0.897 2008-Apr-27 23:35:35 LOG4 check_wapp_levels: WAPP-2 power levels: 1.069 0.985 1.061 1.113 2008-Apr-27 23:35:35 LOG4 check_wapp_levels: WAPP-3 power levels: 0.979 1.011 1.084 0.935 2008-Apr-27 23:35:35 LOG4 check_wapp_levels: WAPP-4 power levels: 1.108 1.091 0.964 0.974 2008-Apr-27 23:35:37 INFO5 check_wapp_levels: WAPP power levels are between 0.607 and 1.113 (still bad) 2008-Apr-27 23:35:39 INFO5 check_wapp_levels: WAPP power levels are between 0.582 and 1.113 (still bad) 2008-Apr-27 23:35:41 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.861 and 1.113 2008-Apr-27 23:35:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.734 < 0.8)! 2008-Apr-27 23:35:51 LOG4 check_wapp_levels: WAPP-1 power levels: 0.946 0.734 0.914 0.896 2008-Apr-27 23:35:51 LOG4 check_wapp_levels: WAPP-2 power levels: 1.067 0.984 1.063 1.113 2008-Apr-27 23:35:51 LOG4 check_wapp_levels: WAPP-3 power levels: 0.979 1.010 1.081 0.935 2008-Apr-27 23:35:51 LOG4 check_wapp_levels: WAPP-4 power levels: 1.105 1.092 0.964 0.975 2008-Apr-27 23:35:53 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.897 and 1.113 2008-Apr-27 23:35:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.658 < 0.8)! 2008-Apr-27 23:35:59 LOG4 check_wapp_levels: WAPP-1 power levels: 0.948 0.658 0.925 0.903 2008-Apr-27 23:35:59 LOG4 check_wapp_levels: WAPP-2 power levels: 1.068 0.982 1.061 1.113 2008-Apr-27 23:35:59 LOG4 check_wapp_levels: WAPP-3 power levels: 0.978 1.010 1.082 0.935 2008-Apr-27 23:35:59 LOG4 check_wapp_levels: WAPP-4 power levels: 1.106 1.093 0.963 0.975 2008-Apr-27 23:36:01 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.905 and 1.113 2008-Apr-27 23:36:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.696 < 0.8)! 2008-Apr-27 23:36:05 LOG4 check_wapp_levels: WAPP-1 power levels: 0.947 0.696 0.925 0.907 2008-Apr-27 23:36:05 LOG4 check_wapp_levels: WAPP-2 power levels: 1.064 0.982 1.061 1.114 2008-Apr-27 23:36:05 LOG4 check_wapp_levels: WAPP-3 power levels: 0.979 1.009 1.084 0.935 2008-Apr-27 23:36:05 LOG4 check_wapp_levels: WAPP-4 power levels: 1.103 1.091 0.962 0.974 2008-Apr-27 23:36:07 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.905 and 1.112 2008-Apr-27 23:36:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.733 < 0.8)! 2008-Apr-27 23:36:09 LOG4 check_wapp_levels: WAPP-1 power levels: 0.947 0.733 0.923 0.903 2008-Apr-27 23:36:09 LOG4 check_wapp_levels: WAPP-2 power levels: 1.066 0.982 1.061 1.113 2008-Apr-27 23:36:09 LOG4 check_wapp_levels: WAPP-3 power levels: 0.981 1.013 1.086 0.934 2008-Apr-27 23:36:09 LOG4 check_wapp_levels: WAPP-4 power levels: 1.105 1.091 0.964 0.973 2008-Apr-27 23:36:11 INFO5 check_wapp_levels: WAPP power levels are between 0.699 and 1.113 (still bad) 2008-Apr-27 23:36:14 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.900 and 1.113 2008-Apr-27 23:36:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.675 < 0.8)! 2008-Apr-27 23:36:34 LOG4 check_wapp_levels: WAPP-1 power levels: 0.949 0.675 0.917 0.900 2008-Apr-27 23:36:34 LOG4 check_wapp_levels: WAPP-2 power levels: 1.067 0.982 1.061 1.113 2008-Apr-27 23:36:34 LOG4 check_wapp_levels: WAPP-3 power levels: 0.979 1.009 1.086 0.935 2008-Apr-27 23:36:34 LOG4 check_wapp_levels: WAPP-4 power levels: 1.103 1.091 0.964 0.975 2008-Apr-27 23:36:36 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.900 and 1.156 2008-Apr-27 23:38:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.642 < 0.8)! 2008-Apr-27 23:38:05 LOG4 check_wapp_levels: WAPP-1 power levels: 0.944 0.642 0.905 0.889 2008-Apr-27 23:38:05 LOG4 check_wapp_levels: WAPP-2 power levels: 1.067 0.984 1.063 1.117 2008-Apr-27 23:38:05 LOG4 check_wapp_levels: WAPP-3 power levels: 0.980 1.011 1.083 0.937 2008-Apr-27 23:38:05 LOG4 check_wapp_levels: WAPP-4 power levels: 1.105 1.092 0.964 0.975 2008-Apr-27 23:38:07 INFO5 check_wapp_levels: WAPP power levels are between 0.641 and 1.116 (still bad) 2008-Apr-27 23:38:09 INFO5 check_wapp_levels: WAPP power levels are between 0.638 and 1.116 (still bad) 2008-Apr-27 23:38:11 INFO5 check_wapp_levels: WAPP power levels are between 0.640 and 1.116 (still bad) 2008-Apr-27 23:38:13 INFO5 check_wapp_levels: WAPP power levels are between 0.647 and 1.118 (still bad) 2008-Apr-27 23:38:15 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.890 and 1.118 2008-Apr-27 23:40:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.798 < 0.8)! 2008-Apr-27 23:40:27 LOG4 check_wapp_levels: WAPP-1 power levels: 0.978 0.798 0.930 0.904 2008-Apr-27 23:40:27 LOG4 check_wapp_levels: WAPP-2 power levels: 1.070 0.992 1.062 1.115 2008-Apr-27 23:40:27 LOG4 check_wapp_levels: WAPP-3 power levels: 1.004 1.019 1.098 0.944 2008-Apr-27 23:40:27 LOG4 check_wapp_levels: WAPP-4 power levels: 1.118 1.100 0.972 0.985 2008-Apr-27 23:40:29 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.906 and 1.115 2008-Apr-27 23:40:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.652 < 0.8)! 2008-Apr-27 23:40:41 LOG4 check_wapp_levels: WAPP-1 power levels: 0.983 0.652 0.935 0.909 2008-Apr-27 23:40:41 LOG4 check_wapp_levels: WAPP-2 power levels: 1.069 0.991 1.061 1.116 2008-Apr-27 23:40:41 LOG4 check_wapp_levels: WAPP-3 power levels: 0.999 1.019 1.096 0.942 2008-Apr-27 23:40:41 LOG4 check_wapp_levels: WAPP-4 power levels: 1.139 1.119 0.992 1.000 2008-Apr-27 23:40:43 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.911 and 1.158 2008-Apr-27 23:42:23 COMMAND CIMA-send_to_exec: Sending command to abort observation 2008-Apr-27 23:42:23 LOG4 exec_msg: From OBSERVER: abort_task abort 2008-Apr-27 23:42:23 WARNING abort_task: WARNING abort requested! 2008-Apr-27 23:42:23 WARNING abort_task: WARNING Aborting waiting on WAPP spectra 2008-Apr-27 23:42:23 WARNING abort_task: WARNING Aborting wait for waiting on WAPP spectra 2008-Apr-27 23:42:23 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'ABORT' 2008-Apr-27 23:42:23 LOG5 end_task: Level: (4) ID = <10218> Status = 1 0 0 0 abort 2008-Apr-27 23:42:24 START begin_task: Starting task 'stopping the WAPPs' 2008-Apr-27 23:42:24 LOG5 begin_task: Level: (4) ID = <10219> Status = 1 0 0 0 abort 2008-Apr-27 23:42:24 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Stopping the WAPPs ...} 2008-Apr-27 23:42:24 INFO1 stop_wapp: Stopping the WAPPs 2008-Apr-27 23:42:24 LOG3 send_to_one_wapp: To WAPPCON: ABORT 2008-Apr-27 23:42:24 LOG3 send_to_one_wapp: To WAPPCON2: ABORT 2008-Apr-27 23:42:24 LOG3 send_to_one_wapp: To WAPPCON3: ABORT 2008-Apr-27 23:42:24 LOG3 send_to_one_wapp: To WAPPCON4: ABORT 2008-Apr-27 23:42:24 START begin_task: Starting task 'waiting on stopping WAPPs' 2008-Apr-27 23:42:24 LOG5 begin_task: Level: (5) ID = <10220> Status = 1 0 0 0 abort 2008-Apr-27 23:42:24 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ABORT' 2008-Apr-27 23:42:25 NOTE WAPP=1+2+3+4-wappcon: WAPP successfully aborted! 2008-Apr-27 23:42:25 LOG4 WAPP=1+2+3+4-start_spectra: Abort request received 2008-Apr-27 23:42:25 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 23:42:25 STOP end_task: Finishing task 'waiting on stopping WAPPs' with status 'ABORT' 2008-Apr-27 23:42:25 LOG5 end_task: Level: (5) ID = <10220> Status = 1 0 0 0 abort 2008-Apr-27 23:42:25 STOP end_task: Finishing task 'stopping the WAPPs' with status 'ABORT' 2008-Apr-27 23:42:25 LOG5 end_task: Level: (4) ID = <10219> Status = 1 0 0 0 abort 2008-Apr-27 23:42:25 STOP end_task: Finishing task 'WAPP spectral observation' with status 'ABORT' 2008-Apr-27 23:42:25 LOG5 end_task: Level: (3) ID = <10217> Status = 1 0 0 0 abort 2008-Apr-27 23:42:25 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-27 23:42:25 LOG5 finish_task: Level: (2) ID = <10186> Status = 1 0 0 0 abort 2008-Apr-27 23:42:25 WARNING finish_task: WARNING aborted pattern: fixed azimuth drift map 2008-Apr-27 23:42:25 LOG4 send_obs_status: To obs_status: <1> ENDTASK Aborted 2008-Apr-27 23:42:25 END end_task: Finishing task 'fixed azimuth drift map' with status 'ABORT' 2008-Apr-27 23:42:25 LOG5 end_task: Level: (2) ID = <10186> Status = 1 0 0 0 abort 2008-Apr-27 23:42:25 ALERT run_command_file: Stopping command file processing at line 51! 2008-Apr-27 23:42:25 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2008-Apr-27 23:42:25 STOP finish_task: Finishing task 'running command file '080427_obs.cmd'' 2008-Apr-27 23:42:25 LOG5 finish_task: Level: (1) ID = <10020> Status = 1 0 0 0 abort 2008-Apr-27 23:42:25 WARNING finish_task: WARNING aborted running: command file '080427_obs.cmd' 2008-Apr-27 23:42:25 LOG4 send_obs_status: To obs_status: <1> ENDTASK Aborted 2008-Apr-27 23:42:25 END end_task: Finishing task 'running command file '080427_obs.cmd'' with status 'ABORT' 2008-Apr-27 23:42:25 LOG5 end_task: Level: (1) ID = <10020> Status = 1 0 0 0 abort 2008-Apr-27 23:42:27 WARNING WAPPDATA-flush_pending: WARNING WAPPDATA flushing 8 dumps! 2008-Apr-27 23:43:15 ALERT CIMA-exit_cima: Exiting CIMA ... 2008-Apr-27 23:43:16 COMMAND CIMA-send_to_exec: Sending command to move interim correlator data 2008-Apr-27 23:43:16 LOG4 exec_msg: From OBSERVER: vw_send {mvdata a2048} 2008-Apr-27 23:43:16 LOG3 vw_send: To DATATAKING: mvdata a2048 2008-Apr-27 23:43:16 COMMAND CIMA-send_to_exec: Sending command to clear telescope offsets 2008-Apr-27 23:43:16 LOG4 exec_msg: From OBSERVER: vw_send {pnt c setoff 0 0} 2008-Apr-27 23:43:16 LOG3 vw_send: To DATATAKING: pnt c setoff 0 0 2008-Apr-27 23:43:16 NOTE CIMA-exit_cima: Cleaning up session ... 2008-Apr-27 23:43:16 LOG4 got_cormsg: From DATATAKING: mvdata a2048 2008-Apr-27 23:43:16 LOG4 got_cormsg: From DATATAKING: pnt c setoff 0 0 2008-Apr-27 23:43:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 23:43:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 23:43:18 LOG3 exec_msg: Closing socket