2008-Apr-26 18:31:19 BEGIN executive: CIMA executive starting ... 2008-Apr-26 18:31:20 NOTE executive: STARTING NEW CIMA SESSION 2008-Apr-26 18:31:20 INFO1 executive: Using CIMA version 2.3.xx 'unusable' from 2008-04-26 12:28 2008-Apr-26 18:31:20 INFO4 executive: This is an ON-LINE session 2008-Apr-26 18:31:20 INFO4 executive: This is a REMOTE session 2008-Apr-26 18:31:20 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2008-Apr-26 18:31:20 INFO1 executive: CIMA session for project 'a2048' in 'line' mode for 'SS' 2008-Apr-26 18:31:20 INFO2 executive: Logging to '/share/obs4/usr/a2048/a2048.cimalog_20080426' 2008-Apr-26 18:31:21 LOG2 log_preferences: Currently applied preferences: 2008-Apr-26 18:31:21 LOG2 log_preferences: prefs(dailylog) = daily 2008-Apr-26 18:31:21 LOG2 log_preferences: prefs(offlinelog) = skip 2008-Apr-26 18:31:21 LOG2 log_preferences: prefs(datawindow) = ignore 2008-Apr-26 18:31:21 LOG2 log_preferences: prefs(limitwarning) = enabled 2008-Apr-26 18:31:21 LOG2 log_preferences: prefs(wappfailure) = abort 2008-Apr-26 18:31:21 LOG2 log_preferences: prefs(helpstyle) = stay-open 2008-Apr-26 18:31:21 LOG2 log_preferences: prefs(logcolours) = full 2008-Apr-26 18:31:21 LOG2 log_preferences: prefs(displaylevel) = INFO3 2008-Apr-26 18:31:21 LOG2 log_preferences: prefs(loglevel) = LOG5 2008-Apr-26 18:31:21 LOG2 log_preferences: prefs(displayformat) = short 2008-Apr-26 18:31:21 LOG2 log_preferences: prefs(logformat) = new 2008-Apr-26 18:31:21 LOG2 log_preferences: prefs(fontsize) = 4 2008-Apr-26 18:31:21 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2008-Apr-26 18:31:21 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2048 2008-Apr-26 18:31:21 ALERT executive: CIMA executive ready 2008-Apr-26 18:31:23 NOTE frontend: CIMA frontend ready 2008-Apr-26 18:31:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:31:23 LOG4 got_cormsg: From DATATAKING: setup 2008-Apr-26 18:31:29 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0x300002 2008-Apr-26 18:31:29 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0x300002' 2008-Apr-26 18:31:29 LOG4 got_cormsg: From DATATAKING: vw% io 2008-Apr-26 18:31:29 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2008-Apr-26 18:31:29 LOG4 got_cormsg: From DATATAKING: 2008-Apr-26 18:31:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:31:29 LOG4 got_cormsg: From DATATAKING: tape stat 2008-Apr-26 18:31:29 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2008-Apr-26 18:31:29 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2008-Apr-26 18:31:29 LOG4 got_cormsg: From DATATAKING: vw% connectall 2008-Apr-26 18:31:29 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2008-Apr-26 18:31:29 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2008-Apr-26 18:31:29 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2008-Apr-26 18:31:29 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2008-Apr-26 18:31:29 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2008-Apr-26 18:31:30 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2008-Apr-26 18:31:30 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2008-Apr-26 18:31:30 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2008-Apr-26 18:31:30 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2048 2008-Apr-26 18:31:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:31:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:31:39 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2008-Apr-26 18:31:39 LOG4 exec_msg: From OBSERVER: restart_wapp 2008-Apr-26 18:31:39 LOG5 restart_wapp: Calling 'restart_wapp' 2008-Apr-26 18:31:39 BEGIN begin_task: Starting task 'restarting the WAPPs' 2008-Apr-26 18:31:39 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Apr-26 18:31:39 NOTE restart_wapp: Restarting all WAPPs 2008-Apr-26 18:31:39 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2008-Apr-26 18:31:39 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2008-Apr-26 18:31:39 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Apr-26 18:31:39 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Apr-26 18:31:42 ALERT WAPP=1-wappcon: WAPP1 restarting 2008-Apr-26 18:31:43 ALERT WAPP=2-wappcon: WAPP2 restarting 2008-Apr-26 18:31:43 ALERT WAPP=4-wappcon: WAPP4 restarting 2008-Apr-26 18:31:43 ALERT WAPP=3-wappcon: WAPP3 restarting 2008-Apr-26 18:32:49 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2008-Apr-26 18:32:49 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2008-Apr-26 18:32:49 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2008-Apr-26 18:32:49 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2008-Apr-26 18:32:49 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Apr-26 18:32:49 NOTE select_receiver: Starting to select receiver ALFA 2008-Apr-26 18:32:49 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Apr-26 18:32:49 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Apr-26 18:32:49 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Apr-26 18:32:49 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Apr-26 18:32:49 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Apr-26 18:32:49 LOG5 finish_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Apr-26 18:32:49 DONE finish_task: DONE finished selecting: receiver ALFA 2008-Apr-26 18:32:49 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-26 18:32:50 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Apr-26 18:32:50 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Apr-26 18:32:50 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Apr-26 18:32:50 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Apr-26 18:32:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:32:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:34:22 INFO1 CIMA-run_command_file: Transferring command file 'command_galfasrc.cmd ' to executive ... 2008-Apr-26 18:34:22 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 5 {LOAD togs_ages.conf} 2008-Apr-26 18:34:22 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 6 {CATALOG togs_ages.cat} 2008-Apr-26 18:34:22 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {GOTO galfasrc} 2008-Apr-26 18:34:22 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {ALFAANGLE 19} 2008-Apr-26 18:34:22 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {WAITTRACK} 2008-Apr-26 18:34:22 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 13 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2008-Apr-26 18:34:22 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-Apr-26 18:34:22 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc.cmd 1 1 6 2008-Apr-26 18:34:22 LOG4 run_command_file: Calling 'run_command_file command_galfasrc.cmd 1 1 6' 2008-Apr-26 18:34:22 BEGIN begin_task: Starting task 'running command file 'command_galfasrc.cmd'' 2008-Apr-26 18:34:22 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Apr-26 18:34:22 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc.cmd' ...} 2008-Apr-26 18:34:22 NOTE run_command_file: Starting execution of command file 'command_galfasrc.cmd' from line 1 2008-Apr-26 18:34:22 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_ages.conf' 2008-Apr-26 18:34:22 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2008-Apr-26 18:34:23 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-26 18:34:23 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2008-Apr-26 18:34:23 NOTE CIMA-load_config_file: Loading configuration file 'togs_ages.conf' 2008-Apr-26 18:34:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Apr-26 18:34:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Apr-26 18:34:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Apr-26 18:34:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Apr-26 18:34:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Apr-26 18:34:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2008-Apr-26 18:34:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Apr-26 18:34:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1381.2" 2008-Apr-26 18:34:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1381.2" 2008-Apr-26 18:34:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1381.2" 2008-Apr-26 18:34:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1381.2" 2008-Apr-26 18:34:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1381.2" 2008-Apr-26 18:34:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1381.2" 2008-Apr-26 18:34:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1381.2" 2008-Apr-26 18:34:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1381.2" 2008-Apr-26 18:34:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1381.2" 2008-Apr-26 18:34:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Apr-26 18:34:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Apr-26 18:34:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Apr-26 18:34:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Apr-26 18:34:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Apr-26 18:34:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Apr-26 18:34:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Apr-26 18:34:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Apr-26 18:34:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Apr-26 18:34:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Apr-26 18:34:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Apr-26 18:34:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Apr-26 18:34:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Apr-26 18:34:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2008-Apr-26 18:34:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Apr-26 18:34:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Apr-26 18:34:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Apr-26 18:34:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Apr-26 18:34:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Apr-26 18:34:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Apr-26 18:34:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Apr-26 18:34:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Apr-26 18:34:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Apr-26 18:34:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1631.200000" 2008-Apr-26 18:34:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Apr-26 18:34:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Apr-26 18:34:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Apr-26 18:34:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Apr-26 18:34:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Apr-26 18:34:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Apr-26 18:34:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Apr-26 18:34:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Apr-26 18:34:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Apr-26 18:34:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Apr-26 18:34:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Apr-26 18:34:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Apr-26 18:34:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Apr-26 18:34:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Apr-26 18:34:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Apr-26 18:34:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Apr-26 18:34:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Apr-26 18:34:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Apr-26 18:34:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Apr-26 18:34:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Apr-26 18:34:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Apr-26 18:34:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Apr-26 18:34:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Apr-26 18:34:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Apr-26 18:34:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Apr-26 18:34:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Apr-26 18:34:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Apr-26 18:34:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Apr-26 18:34:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Apr-26 18:34:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Apr-26 18:34:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Apr-26 18:34:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Apr-26 18:34:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Apr-26 18:34:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Apr-26 18:34:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Apr-26 18:34:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Apr-26 18:34:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Apr-26 18:34:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Apr-26 18:34:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Apr-26 18:34:25 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-26 18:34:25 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Apr-26 18:34:25 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Apr-26 18:34:25 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Apr-26 18:34:25 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Apr-26 18:34:25 INFO1 config_iflo: Selecting receiver ALFA 2008-Apr-26 18:34:25 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2008-Apr-26 18:34:25 LOG1 select_receiver: Calling 'select_receiver alfa no no no' 2008-Apr-26 18:34:25 START begin_task: Starting task 'selecting receiver ALFA' 2008-Apr-26 18:34:25 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Apr-26 18:34:25 NOTE select_receiver: Starting to select receiver ALFA 2008-Apr-26 18:34:25 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Apr-26 18:34:25 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Apr-26 18:34:25 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Apr-26 18:34:25 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Apr-26 18:34:25 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Apr-26 18:34:25 LOG5 finish_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Apr-26 18:34:25 INFO2 finish_task: DONE finished selecting: receiver ALFA 2008-Apr-26 18:34:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 18:34:25 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Apr-26 18:34:25 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Apr-26 18:34:25 START begin_task: Starting task 'waiting for receiver ALFA' 2008-Apr-26 18:34:25 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2008-Apr-26 18:34:25 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2008-Apr-26 18:34:25 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2008-Apr-26 18:34:25 INFO1 config_iflo: Configuring rest of the IF/LO path 2008-Apr-26 18:34:25 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2008-Apr-26 18:34:25 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-26 18:34:25 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-26 18:34:25 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-26 18:34:25 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2008-Apr-26 18:34:25 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-26 18:34:25 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-26 18:34:25 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2008-Apr-26 18:34:25 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-26 18:34:25 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-26 18:34:25 LOG3 vw_send: To DATATAKING: alfafb 1 2008-Apr-26 18:34:25 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2008-Apr-26 18:34:25 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Apr-26 18:34:25 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Apr-26 18:34:25 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2008-Apr-26 18:34:25 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2008-Apr-26 18:34:25 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2008-Apr-26 18:34:25 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2008-Apr-26 18:34:25 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2008-Apr-26 18:34:25 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2008-Apr-26 18:34:25 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Apr-26 18:34:25 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Apr-26 18:34:25 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Apr-26 18:34:25 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Apr-26 18:34:25 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Apr-26 18:34:25 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2008-Apr-26 18:34:25 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2008-Apr-26 18:34:25 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2008-Apr-26 18:34:25 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2008-Apr-26 18:34:25 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Apr-26 18:34:25 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2008-Apr-26 18:34:25 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Apr-26 18:34:25 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Apr-26 18:34:25 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 18:34:25 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Apr-26 18:34:25 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2008-Apr-26 18:34:25 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Apr-26 18:34:25 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2008-Apr-26 18:34:25 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2008-Apr-26 18:34:25 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Apr-26 18:34:26 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 18:34:26 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Apr-26 18:34:26 LOG5 begin_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2008-Apr-26 18:34:26 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Apr-26 18:34:26 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Apr-26 18:34:26 LOG4 got_cormsg: From DATATAKING: alfafb 1 2008-Apr-26 18:34:26 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2008-Apr-26 18:34:26 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2008-Apr-26 18:34:26 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2008-Apr-26 18:34:26 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2008-Apr-26 18:34:26 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2008-Apr-26 18:34:26 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2008-Apr-26 18:34:26 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2008-Apr-26 18:34:26 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2008-Apr-26 18:34:26 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2008-Apr-26 18:34:26 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2008-Apr-26 18:34:26 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2008-Apr-26 18:34:26 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Apr-26 18:34:26 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2008-Apr-26 18:34:26 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Apr-26 18:34:26 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 18:34:26 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Apr-26 18:34:26 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2008-Apr-26 18:34:26 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2008-Apr-26 18:34:26 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2008-Apr-26 18:34:26 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 18:34:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:34:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:34:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:34:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:34:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:34:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:34:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:34:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:34:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:34:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:34:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:34:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:34:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:34:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:34:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:34:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:34:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:34:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:34:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:34:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:34:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:34:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:34:41 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-26 18:34:41 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Apr-26 18:34:41 LOG5 end_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2008-Apr-26 18:34:41 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Apr-26 18:34:41 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Apr-26 18:34:41 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Apr-26 18:34:41 DONE finish_task: DONE finished configuration: IF/LO path 2008-Apr-26 18:34:41 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-26 18:34:41 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Apr-26 18:34:41 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Apr-26 18:34:41 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Apr-26 18:34:42 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Apr-26 18:34:42 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Apr-26 18:34:42 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Apr-26 18:34:42 START begin_task: Starting task 'selecting calibration port' 2008-Apr-26 18:34:42 LOG5 begin_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-Apr-26 18:34:42 LOG3 vw_send: To DATATAKING: calport 3 2008-Apr-26 18:34:42 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Apr-26 18:34:42 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 18:34:42 START begin_task: Starting task 'waiting on calport' 2008-Apr-26 18:34:42 LOG5 begin_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2008-Apr-26 18:34:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:34:42 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Apr-26 18:34:42 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 18:34:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:34:42 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-26 18:34:42 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Apr-26 18:34:42 LOG5 end_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2008-Apr-26 18:34:42 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Apr-26 18:34:42 STOP finish_task: Finishing task 'selecting calibration port' 2008-Apr-26 18:34:42 LOG5 finish_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-Apr-26 18:34:42 INFO2 finish_task: DONE finished configuring: calibration port 2008-Apr-26 18:34:42 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 18:34:42 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Apr-26 18:34:42 LOG5 end_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-Apr-26 18:34:42 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Apr-26 18:34:42 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Apr-26 18:34:42 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Apr-26 18:34:42 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Apr-26 18:34:42 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Apr-26 18:34:42 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Apr-26 18:34:42 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Apr-26 18:34:42 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Apr-26 18:34:42 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 SS 2008-Apr-26 18:34:42 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 SS 2008-Apr-26 18:34:42 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 SS 2008-Apr-26 18:34:42 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 SS 2008-Apr-26 18:34:42 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Apr-26 18:34:42 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Apr-26 18:34:42 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-26 18:34:42 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2008-Apr-26 18:34:42 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-26 18:34:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:34:42 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-26 18:34:42 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-26 18:34:42 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-26 18:34:42 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2008-Apr-26 18:34:42 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 SS 2008-Apr-26 18:34:42 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 SS 2008-Apr-26 18:34:42 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 SS 2008-Apr-26 18:34:42 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 SS 2008-Apr-26 18:34:42 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Apr-26 18:34:42 LOG5 finish_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Apr-26 18:34:42 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Apr-26 18:34:43 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-26 18:34:43 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Apr-26 18:34:43 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Apr-26 18:34:43 COMMAND run_command_line: EXECUTING command 6: 'CATALOG togs_ages.cat' 2008-Apr-26 18:34:43 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/togs_ages.cat' 2008-Apr-26 18:34:43 COMMAND run_command_line: EXECUTING command 7: 'GOTO galfasrc' 2008-Apr-26 18:34:43 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2048/togs_ages.cat galfasrc nooffset nowait' 2008-Apr-26 18:34:43 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2008-Apr-26 18:34:43 LOG5 begin_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2008-Apr-26 18:34:43 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2008-Apr-26 18:34:43 LOG3 track_source: Calling 'track_source galfasrc 094300.0 +215300 J 0.0 0.0 main small /share/obs4/usr/a2048/togs_ages.cat 0 Topocentric velocity(optical)' 2008-Apr-26 18:34:43 START begin_task: Starting task 'sending tracking commands' 2008-Apr-26 18:34:43 LOG5 begin_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2008-Apr-26 18:34:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2008-Apr-26 18:34:43 INFO1 track_source: Starting to track galfasrc 2008-Apr-26 18:34:43 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2008-Apr-26 18:34:43 LOG3 vw_send: To DATATAKING: set ra 094300.0 2008-Apr-26 18:34:43 LOG3 vw_send: To DATATAKING: set dec +215300 2008-Apr-26 18:34:43 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-26 18:34:43 LOG3 vw_send: To DATATAKING: pnt tr 094300.0 +215300 -CJ 2008-Apr-26 18:34:43 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Apr-26 18:34:43 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-26 18:34:43 LOG5 finish_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2008-Apr-26 18:34:43 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-26 18:34:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 18:34:43 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-26 18:34:43 LOG5 end_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2008-Apr-26 18:34:43 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2008-Apr-26 18:34:43 LOG5 finish_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2008-Apr-26 18:34:43 DONE finish_task: DONE finished tracking: source 'galfasrc' 2008-Apr-26 18:34:43 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-26 18:34:43 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2008-Apr-26 18:34:43 LOG5 end_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2008-Apr-26 18:34:43 COMMAND run_command_line: EXECUTING command 8: 'ALFAANGLE 19' 2008-Apr-26 18:34:43 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2008-Apr-26 18:34:43 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Apr-26 18:34:43 LOG5 begin_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2008-Apr-26 18:34:43 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Apr-26 18:34:43 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Apr-26 18:34:43 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-Apr-26 18:34:43 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-26 18:34:43 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-26 18:34:43 LOG5 begin_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2008-Apr-26 18:34:43 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 SS' 2008-Apr-26 18:34:43 NOTE WAPPDATA-new_file: New FITS file: wapp.20080426.a2048.0000.fits 2008-Apr-26 18:34:43 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2008-Apr-26 18:34:43 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Apr-26 18:34:43 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Apr-26 18:34:43 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20080426.a2048.0000.fits} 2008-Apr-26 18:34:43 LOG4 got_cormsg: From DATATAKING: set ra 094300.0 2008-Apr-26 18:34:43 LOG4 got_cormsg: From DATATAKING: set dec +215300 2008-Apr-26 18:34:43 LOG4 got_cormsg: From DATATAKING: vw% 094300.0 2008-Apr-26 18:34:43 LOG4 got_cormsg: From DATATAKING: vw% +215300 2008-Apr-26 18:34:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:34:43 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-26 18:34:44 LOG4 got_cormsg: From DATATAKING: pnt tr 094300.0 +215300 -CJ 2008-Apr-26 18:34:44 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Apr-26 18:34:44 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-26 18:34:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:34:44 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 SS' 2008-Apr-26 18:34:51 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-26 18:34:51 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Apr-26 18:34:51 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-26 18:34:51 LOG5 end_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2008-Apr-26 18:34:51 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-26 18:34:51 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Apr-26 18:34:51 LOG5 finish_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2008-Apr-26 18:34:51 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Apr-26 18:34:51 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-26 18:34:51 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Apr-26 18:34:51 LOG5 end_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2008-Apr-26 18:34:51 COMMAND run_command_line: EXECUTING command 9: 'WAITTRACK' 2008-Apr-26 18:34:51 BEGIN begin_task: Starting task 'waiting on telescope' 2008-Apr-26 18:34:51 LOG5 begin_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2008-Apr-26 18:34:51 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-26 18:34:51 LOG3 waittrk: Start waittrk 5 2008-Apr-26 18:34:51 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-26 18:34:51 LOG5 begin_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2008-Apr-26 18:34:56 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-26 18:34:56 LOG5 end_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2008-Apr-26 18:34:56 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-26 18:34:56 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2008-Apr-26 18:38:01 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-26 18:38:01 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2008-Apr-26 18:38:01 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-26 18:38:01 INFO2 waittrk: Now tracking galfasrc 2008-Apr-26 18:38:01 LOG4 waittrk: Current telescope position: Az = 254.81 ZA = 17.10 2008-Apr-26 18:38:01 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-26 18:38:01 LOG5 finish_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2008-Apr-26 18:38:01 DONE finish_task: DONE finished waiting: telescope on source 2008-Apr-26 18:38:01 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-26 18:38:01 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-26 18:38:01 LOG5 end_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2008-Apr-26 18:38:01 COMMAND run_command_line: EXECUTING command 13: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2008-Apr-26 18:38:01 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2008-Apr-26 18:38:02 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-26 18:38:02 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first 0 {1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2008-Apr-26 18:38:02 BEGIN begin_task: Starting task 'smart frequency switching' 2008-Apr-26 18:38:02 LOG5 begin_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2008-Apr-26 18:38:02 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'galfasrc' 2008-Apr-26 18:38:02 INFO1 smartfreq: Starting pattern: Smart frequency switching 2008-Apr-26 18:38:02 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2008-Apr-26 18:38:02 START begin_task: Starting task 'selecting calibration type' 2008-Apr-26 18:38:02 LOG5 begin_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2008-Apr-26 18:38:02 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-26 18:38:02 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-26 18:38:02 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 18:38:02 START begin_task: Starting task 'waiting on setcal' 2008-Apr-26 18:38:02 LOG5 begin_task: Level: (4) ID = <10022> Status = 0 0 0 0 ok 2008-Apr-26 18:38:02 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-26 18:38:02 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 18:38:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:38:02 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-26 18:38:02 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-26 18:38:02 LOG5 end_task: Level: (4) ID = <10022> Status = 0 0 0 0 ok 2008-Apr-26 18:38:02 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-26 18:38:02 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-26 18:38:02 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-26 18:38:02 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-26 18:38:02 LOG5 begin_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2008-Apr-26 18:38:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:38:02 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-26 18:38:02 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-26 18:38:02 LOG5 end_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2008-Apr-26 18:38:02 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-26 18:38:02 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-26 18:38:02 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-26 18:38:02 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-26 18:38:02 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-26 18:38:02 LOG5 begin_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2008-Apr-26 18:38:02 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-26 18:38:02 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-26 18:38:02 LOG5 end_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2008-Apr-26 18:38:02 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-26 18:38:02 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-26 18:38:02 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-26 18:38:02 LOG5 finish_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2008-Apr-26 18:38:02 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-26 18:38:02 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 18:38:02 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-26 18:38:02 LOG5 end_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2008-Apr-26 18:38:02 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 SS 2008-Apr-26 18:38:02 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 SS 2008-Apr-26 18:38:02 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 SS 2008-Apr-26 18:38:02 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 SS 2008-Apr-26 18:38:02 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20080426.a2048.0000.fits' is empty! 2008-Apr-26 18:38:02 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2008-Apr-26 18:38:02 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-26 18:38:02 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2008-Apr-26 18:38:02 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-26 18:38:02 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-26 18:38:02 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-26 18:38:02 LOG5 begin_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2008-Apr-26 18:38:02 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-26 18:38:02 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-26 18:38:02 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-26 18:38:02 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-26 18:38:02 LOG5 end_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2008-Apr-26 18:38:02 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2008-Apr-26 18:38:03 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-26 18:38:03 LOG5 begin_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-Apr-26 18:38:03 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-26 18:38:03 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-26 18:38:03 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-26 18:38:03 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-26 18:38:03 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 18:38:03 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-26 18:38:03 LOG5 begin_task: Level: (4) ID = <10027> Status = 0 0 0 0 ok 2008-Apr-26 18:38:03 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-26 18:38:03 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 18:38:03 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 SS' 2008-Apr-26 18:38:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:38:06 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-26 18:38:06 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-26 18:38:06 LOG5 end_task: Level: (4) ID = <10027> Status = 0 0 0 0 ok 2008-Apr-26 18:38:06 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-26 18:38:06 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-26 18:38:06 LOG5 begin_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2008-Apr-26 18:38:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-26 18:38:06 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-26 18:38:06 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-26 18:38:06 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-26 18:38:06 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-26 18:38:06 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-26 18:38:06 LOG5 begin_task: Level: (5) ID = <10029> Status = 0 0 0 0 ok 2008-Apr-26 18:38:06 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-26 18:38:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:38:06 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 2 dB --- beam 1: 8 7 dB 2008-Apr-26 18:38:06 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 7 6 dB 2008-Apr-26 18:38:06 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 4 dB 2008-Apr-26 18:38:06 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 3 3 dB 2008-Apr-26 18:38:06 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-26 18:38:06 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-26 18:38:06 LOG5 end_task: Level: (5) ID = <10029> Status = 0 0 0 0 ok 2008-Apr-26 18:38:06 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.931 0.875 ALFA beam 1: 0.937 0.944 2008-Apr-26 18:38:06 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.108 1.047 ALFA beam 3: 1.096 0.936 2008-Apr-26 18:38:06 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.044 1.080 ALFA beam 5: 0.901 0.993 2008-Apr-26 18:38:06 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.069 1.082 ALFA beam 7: 0.938 0.970 2008-Apr-26 18:38:06 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-26 18:38:06 LOG5 finish_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2008-Apr-26 18:38:06 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-26 18:38:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 18:38:06 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-26 18:38:06 LOG5 end_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2008-Apr-26 18:38:07 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-26 18:38:07 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-26 18:38:07 LOG5 finish_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-Apr-26 18:38:07 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-26 18:38:07 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 18:38:07 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-26 18:38:07 LOG5 end_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-Apr-26 18:38:07 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2008-Apr-26 18:38:07 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2008-Apr-26 18:38:07 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2008-Apr-26 18:38:07 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-26 18:38:07 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32245 J 2008-Apr-26 18:38:07 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.3 2008-Apr-26 18:38:07 LOG2 antvel: Parameters to Doppler: Topocentric 81486 2008 117 0.0 2008-Apr-26 18:38:07 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-26 18:38:07 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2008-Apr-26 18:38:07 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2008-Apr-26 18:38:07 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-26 18:38:07 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-26 18:38:07 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Apr-26 18:38:07 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 18:38:07 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-26 18:38:07 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-26 18:38:07 LOG5 begin_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2008-Apr-26 18:38:07 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-26 18:38:07 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.537637 2008.3224543691535 18.999933 2008-Apr-26 18:38:07 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666670 21.883333333333336 2008-Apr-26 18:38:07 LOG4 log_alfabeam: ALFABEAM 1 9.709417906175624 21.850413769172839 2008-Apr-26 18:38:07 LOG4 log_alfabeam: ALFABEAM 2 9.715117672693253 21.792804415910442 2008-Apr-26 18:38:07 LOG4 log_alfabeam: ALFABEAM 3 9.722373287953671 21.825340497984783 2008-Apr-26 18:38:07 LOG4 log_alfabeam: ALFABEAM 4 9.723915308550954 21.916384205395723 2008-Apr-26 18:38:07 LOG4 log_alfabeam: ALFABEAM 5 9.718183764525801 21.974132578066147 2008-Apr-26 18:38:07 LOG4 log_alfabeam: ALFABEAM 6 9.710942137045500 21.940698495820488 2008-Apr-26 18:38:07 INFO2 take_spectra: Starting WAPP+GALFA scan: 811700426 2008-Apr-26 18:38:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-26 18:38:07 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-26 18:38:07 LOG5 begin_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2008-Apr-26 18:38:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-26 18:38:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Apr-26 18:38:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 18:38:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:38:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:38:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81488.00 2008-Apr-26 18:38:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-26 18:38:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-26 18:38:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-26 18:38:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-26 18:38:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-26 18:38:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:38:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:38:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:38:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:38:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-26 18:38:18 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-26 18:38:18 LOG5 end_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2008-Apr-26 18:38:18 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-26 18:38:18 LOG5 end_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2008-Apr-26 18:38:18 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2008-Apr-26 18:38:18 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2008-Apr-26 18:38:18 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2008-Apr-26 18:38:18 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-26 18:38:18 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32245 J 2008-Apr-26 18:38:18 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.3 2008-Apr-26 18:38:18 LOG2 antvel: Parameters to Doppler: Topocentric 81497 2008 117 0.0 2008-Apr-26 18:38:18 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-26 18:38:18 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2008-Apr-26 18:38:18 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2008-Apr-26 18:38:18 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-26 18:38:18 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-26 18:38:18 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Apr-26 18:38:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 18:38:18 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-26 18:38:18 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-26 18:38:18 LOG5 begin_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2008-Apr-26 18:38:18 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-26 18:38:18 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.540700 2008.3224547177226 18.999933 2008-Apr-26 18:38:18 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666663 21.883333333333336 2008-Apr-26 18:38:18 LOG4 log_alfabeam: ALFABEAM 1 9.709419472476098 21.850347152033766 2008-Apr-26 18:38:18 LOG4 log_alfabeam: ALFABEAM 2 9.715121937880054 21.792790503020914 2008-Apr-26 18:38:18 LOG4 log_alfabeam: ALFABEAM 3 9.722376031135859 21.825392404524308 2008-Apr-26 18:38:18 LOG4 log_alfabeam: ALFABEAM 4 9.723913729516088 21.916451354172256 2008-Apr-26 18:38:18 LOG4 log_alfabeam: ALFABEAM 5 9.718179392118413 21.974146914801448 2008-Apr-26 18:38:18 LOG4 log_alfabeam: ALFABEAM 6 9.710939388801171 21.940644890326126 2008-Apr-26 18:38:18 INFO2 take_spectra: Starting WAPP+GALFA scan: 811700427 2008-Apr-26 18:38:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-26 18:38:19 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-26 18:38:19 LOG5 begin_task: Level: (4) ID = <10033> Status = 0 0 0 0 ok 2008-Apr-26 18:38:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-26 18:38:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Apr-26 18:38:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 18:38:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:38:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:38:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81500.00 2008-Apr-26 18:38:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-26 18:38:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-26 18:38:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-26 18:38:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-26 18:38:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-26 18:38:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:38:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:38:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:38:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:38:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-26 18:38:30 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-26 18:38:30 LOG5 end_task: Level: (4) ID = <10033> Status = 0 0 0 0 ok 2008-Apr-26 18:38:30 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-26 18:38:30 LOG5 end_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2008-Apr-26 18:38:30 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2008-Apr-26 18:38:30 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2008-Apr-26 18:38:30 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2008-Apr-26 18:38:30 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-26 18:38:30 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32246 J 2008-Apr-26 18:38:30 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.3 2008-Apr-26 18:38:30 LOG2 antvel: Parameters to Doppler: Topocentric 81510 2008 117 0.0 2008-Apr-26 18:38:30 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-26 18:38:30 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2008-Apr-26 18:38:30 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2008-Apr-26 18:38:30 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-26 18:38:30 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-26 18:38:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Apr-26 18:38:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 18:38:30 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-26 18:38:30 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-26 18:38:30 LOG5 begin_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2008-Apr-26 18:38:30 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-26 18:38:30 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.544321 2008.3224551296678 18.999933 2008-Apr-26 18:38:30 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333322 2008-Apr-26 18:38:30 LOG4 log_alfabeam: ALFABEAM 1 9.709421336008713 21.850268086327773 2008-Apr-26 18:38:30 LOG4 log_alfabeam: ALFABEAM 2 9.715127002095443 21.792774037270096 2008-Apr-26 18:38:30 LOG4 log_alfabeam: ALFABEAM 3 9.722379284533179 21.825454057313500 2008-Apr-26 18:38:30 LOG4 log_alfabeam: ALFABEAM 4 9.723911850784104 21.916531051340247 2008-Apr-26 18:38:30 LOG4 log_alfabeam: ALFABEAM 5 9.718174200443359 21.974163882164596 2008-Apr-26 18:38:30 LOG4 log_alfabeam: ALFABEAM 6 9.710936129563672 21.940581218442457 2008-Apr-26 18:38:30 INFO2 take_spectra: Starting WAPP+GALFA scan: 811700428 2008-Apr-26 18:38:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-26 18:38:31 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-26 18:38:31 LOG5 begin_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2008-Apr-26 18:38:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-26 18:38:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Apr-26 18:38:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 18:38:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:38:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:38:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81512.00 2008-Apr-26 18:38:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-26 18:38:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-26 18:38:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-26 18:38:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-26 18:38:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-26 18:38:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:38:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:38:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:38:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:38:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-26 18:38:42 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-26 18:38:42 LOG5 end_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2008-Apr-26 18:38:42 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-26 18:38:42 LOG5 end_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2008-Apr-26 18:38:42 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2008-Apr-26 18:38:42 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2008-Apr-26 18:38:42 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2008-Apr-26 18:38:42 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-26 18:38:42 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32246 J 2008-Apr-26 18:38:42 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.3 2008-Apr-26 18:38:42 LOG2 antvel: Parameters to Doppler: Topocentric 81522 2008 117 0.0 2008-Apr-26 18:38:42 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-26 18:38:42 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2008-Apr-26 18:38:42 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2008-Apr-26 18:38:42 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-26 18:38:42 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-26 18:38:42 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Apr-26 18:38:42 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 18:38:42 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-26 18:38:42 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-26 18:38:42 LOG5 begin_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2008-Apr-26 18:38:42 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-26 18:38:42 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.547664 2008.3224555099248 18.999933 2008-Apr-26 18:38:42 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666665 21.883333333333336 2008-Apr-26 18:38:42 LOG4 log_alfabeam: ALFABEAM 1 9.709423068018907 21.850194787803321 2008-Apr-26 18:38:42 LOG4 log_alfabeam: ALFABEAM 2 9.715131698863770 21.792758818160422 2008-Apr-26 18:38:42 LOG4 log_alfabeam: ALFABEAM 3 9.722382298297758 21.825511258279274 2008-Apr-26 18:38:42 LOG4 log_alfabeam: ALFABEAM 4 9.723910104600348 21.916604935726895 2008-Apr-26 18:38:42 LOG4 log_alfabeam: ALFABEAM 5 9.718169385316019 21.974179564895959 2008-Apr-26 18:38:42 LOG4 log_alfabeam: ALFABEAM 6 9.710933110548321 21.940522143088032 2008-Apr-26 18:38:42 INFO2 take_spectra: Starting WAPP+GALFA scan: 811700429 2008-Apr-26 18:38:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-26 18:38:43 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-26 18:38:43 LOG5 begin_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2008-Apr-26 18:38:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-26 18:38:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Apr-26 18:38:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 18:38:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:38:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:38:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81524.00 2008-Apr-26 18:38:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-26 18:38:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-26 18:38:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-26 18:38:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-26 18:38:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-26 18:38:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:38:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:38:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:38:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:38:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-26 18:38:54 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-26 18:38:54 LOG5 end_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2008-Apr-26 18:38:54 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-26 18:38:54 LOG5 end_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2008-Apr-26 18:38:54 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2008-Apr-26 18:38:54 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2008-Apr-26 18:38:54 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2008-Apr-26 18:38:54 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-26 18:38:54 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32246 J 2008-Apr-26 18:38:54 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.3 2008-Apr-26 18:38:54 LOG2 antvel: Parameters to Doppler: Topocentric 81534 2008 117 0.0 2008-Apr-26 18:38:54 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-26 18:38:54 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2008-Apr-26 18:38:54 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2008-Apr-26 18:38:54 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-26 18:38:54 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-26 18:38:54 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Apr-26 18:38:54 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 18:38:54 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-26 18:38:54 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-26 18:38:54 LOG5 begin_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2008-Apr-26 18:38:54 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-26 18:38:54 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.551006 2008.3224558901818 18.999933 2008-Apr-26 18:38:54 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333329 2008-Apr-26 18:38:54 LOG4 log_alfabeam: ALFABEAM 1 9.709424810703805 21.850121218087370 2008-Apr-26 18:38:54 LOG4 log_alfabeam: ALFABEAM 2 9.715136414892717 21.792743586892072 2008-Apr-26 18:38:54 LOG4 log_alfabeam: ALFABEAM 3 9.722385320962148 21.825568714676269 2008-Apr-26 18:38:54 LOG4 log_alfabeam: ALFABEAM 4 9.723908347609202 21.916679093913480 2008-Apr-26 18:38:54 LOG4 log_alfabeam: ALFABEAM 5 9.718164550300559 21.974195260135012 2008-Apr-26 18:38:54 LOG4 log_alfabeam: ALFABEAM 6 9.710930082772492 21.940462802890021 2008-Apr-26 18:38:54 INFO2 take_spectra: Starting WAPP+GALFA scan: 811700430 2008-Apr-26 18:38:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-26 18:38:55 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-26 18:38:55 LOG5 begin_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2008-Apr-26 18:38:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-26 18:38:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Apr-26 18:38:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 18:38:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:38:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:38:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81536.00 2008-Apr-26 18:38:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-26 18:38:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-26 18:38:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-26 18:38:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-26 18:38:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-26 18:38:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:38:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:38:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:38:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:39:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-26 18:39:06 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-26 18:39:06 LOG5 end_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2008-Apr-26 18:39:06 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-26 18:39:06 LOG5 end_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2008-Apr-26 18:39:06 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2008-Apr-26 18:39:06 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2008-Apr-26 18:39:06 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2008-Apr-26 18:39:06 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-26 18:39:06 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32246 J 2008-Apr-26 18:39:06 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.3 2008-Apr-26 18:39:06 LOG2 antvel: Parameters to Doppler: Topocentric 81546 2008 117 0.0 2008-Apr-26 18:39:06 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-26 18:39:06 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2008-Apr-26 18:39:06 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2008-Apr-26 18:39:06 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-26 18:39:06 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-26 18:39:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Apr-26 18:39:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 18:39:06 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-26 18:39:06 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-26 18:39:06 LOG5 begin_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2008-Apr-26 18:39:06 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-26 18:39:06 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.554349 2008.3224562704388 18.999933 2008-Apr-26 18:39:06 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333333 2008-Apr-26 18:39:06 LOG4 log_alfabeam: ALFABEAM 1 9.709426565214445 21.850047330884660 2008-Apr-26 18:39:06 LOG4 log_alfabeam: ALFABEAM 2 9.715141153174134 21.792728334440486 2008-Apr-26 18:39:06 LOG4 log_alfabeam: ALFABEAM 3 9.722388354399854 21.825626463222910 2008-Apr-26 18:39:06 LOG4 log_alfabeam: ALFABEAM 4 9.723906578649588 21.916753572566659 2008-Apr-26 18:39:06 LOG4 log_alfabeam: ALFABEAM 5 9.718159692328406 21.974210977172415 2008-Apr-26 18:39:06 LOG4 log_alfabeam: ALFABEAM 6 9.710927044362011 21.940403159923921 2008-Apr-26 18:39:06 INFO2 take_spectra: Starting WAPP+GALFA scan: 811700431 2008-Apr-26 18:39:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-26 18:39:07 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-26 18:39:07 LOG5 begin_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2008-Apr-26 18:39:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-26 18:39:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Apr-26 18:39:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 18:39:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:39:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:39:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81548.00 2008-Apr-26 18:39:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-26 18:39:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-26 18:39:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-26 18:39:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-26 18:39:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-26 18:39:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:39:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:39:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:39:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:39:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-26 18:39:18 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-26 18:39:18 LOG5 end_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2008-Apr-26 18:39:18 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-26 18:39:18 LOG5 end_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2008-Apr-26 18:39:18 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2008-Apr-26 18:39:18 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2008-Apr-26 18:39:18 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2008-Apr-26 18:39:18 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-26 18:39:18 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32246 J 2008-Apr-26 18:39:18 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.3 2008-Apr-26 18:39:18 LOG2 antvel: Parameters to Doppler: Topocentric 81558 2008 117 0.0 2008-Apr-26 18:39:18 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-26 18:39:18 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2008-Apr-26 18:39:18 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2008-Apr-26 18:39:18 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-26 18:39:18 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-26 18:39:18 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Apr-26 18:39:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 18:39:18 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-26 18:39:18 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-26 18:39:18 LOG5 begin_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2008-Apr-26 18:39:18 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-26 18:39:18 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.557691 2008.322456650696 18.999933 2008-Apr-26 18:39:18 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333329 2008-Apr-26 18:39:18 LOG4 log_alfabeam: ALFABEAM 1 9.709428330610596 21.849973168109898 2008-Apr-26 18:39:18 LOG4 log_alfabeam: ALFABEAM 2 9.715145911044580 21.792713070024824 2008-Apr-26 18:39:18 LOG4 log_alfabeam: ALFABEAM 3 9.722391396861141 21.825684471729460 2008-Apr-26 18:39:18 LOG4 log_alfabeam: ALFABEAM 4 9.723904798668858 21.916828329437344 2008-Apr-26 18:39:18 LOG4 log_alfabeam: ALFABEAM 5 9.718154814129054 21.974226706499230 2008-Apr-26 18:39:18 LOG4 log_alfabeam: ALFABEAM 6 9.710923997072001 21.940343247433287 2008-Apr-26 18:39:18 INFO2 take_spectra: Starting WAPP+GALFA scan: 811700432 2008-Apr-26 18:39:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-26 18:39:19 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-26 18:39:19 LOG5 begin_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2008-Apr-26 18:39:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-26 18:39:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Apr-26 18:39:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 18:39:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:39:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:39:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81560.00 2008-Apr-26 18:39:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-26 18:39:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-26 18:39:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-26 18:39:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-26 18:39:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-26 18:39:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:39:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:39:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:39:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:39:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-26 18:39:30 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-26 18:39:30 LOG5 end_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2008-Apr-26 18:39:30 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-26 18:39:30 LOG5 end_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2008-Apr-26 18:39:30 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2008-Apr-26 18:39:30 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-26 18:39:30 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-26 18:39:30 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-26 18:39:30 LOG5 begin_task: Level: (3) ID = <10044> Status = 0 0 0 0 ok 2008-Apr-26 18:39:30 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-26 18:39:30 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-26 18:39:30 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-26 18:39:30 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-26 18:39:30 LOG5 end_task: Level: (3) ID = <10044> Status = 0 0 0 0 ok 2008-Apr-26 18:39:30 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2008-Apr-26 18:39:30 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2008-Apr-26 18:39:30 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2008-Apr-26 18:39:30 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-26 18:39:30 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32246 J 2008-Apr-26 18:39:30 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.3 2008-Apr-26 18:39:30 LOG2 antvel: Parameters to Doppler: Topocentric 81570 2008 117 0.0 2008-Apr-26 18:39:30 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-26 18:39:30 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2008-Apr-26 18:39:30 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2008-Apr-26 18:39:30 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-26 18:39:30 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-26 18:39:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Apr-26 18:39:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 18:39:30 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-26 18:39:30 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-26 18:39:30 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2008-Apr-26 18:39:30 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-26 18:39:30 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.561034 2008.322457030953 18.999933 2008-Apr-26 18:39:30 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666663 21.883333333333347 2008-Apr-26 18:39:30 LOG4 log_alfabeam: ALFABEAM 1 9.709430108059614 21.849898683067764 2008-Apr-26 18:39:30 LOG4 log_alfabeam: ALFABEAM 2 9.715150691524590 21.792697784608393 2008-Apr-26 18:39:30 LOG4 log_alfabeam: ALFABEAM 3 9.722394450232359 21.825742777297389 2008-Apr-26 18:39:30 LOG4 log_alfabeam: ALFABEAM 4 9.723903006489403 21.916903411596007 2008-Apr-26 18:39:30 LOG4 log_alfabeam: ALFABEAM 5 9.718149912604344 21.974242457418221 2008-Apr-26 18:39:30 LOG4 log_alfabeam: ALFABEAM 6 9.710920939015695 21.940283027096928 2008-Apr-26 18:39:30 INFO2 take_spectra: Starting WAPP+GALFA scan: 811700433 2008-Apr-26 18:39:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-26 18:39:31 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-26 18:39:31 LOG5 begin_task: Level: (4) ID = <10046> Status = 0 0 0 0 ok 2008-Apr-26 18:39:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-26 18:39:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Apr-26 18:39:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 18:39:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:39:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:39:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81572.00 2008-Apr-26 18:39:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-26 18:39:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-26 18:39:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-26 18:39:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-26 18:39:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-26 18:39:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:39:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:39:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:39:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:39:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.568 > 1.4)! 2008-Apr-26 18:39:33 LOG4 check_wapp_levels: WAPP-1 power levels: 0.944 0.889 0.936 0.940 2008-Apr-26 18:39:33 LOG4 check_wapp_levels: WAPP-2 power levels: 1.504 1.461 1.568 1.273 2008-Apr-26 18:39:33 LOG4 check_wapp_levels: WAPP-3 power levels: 1.056 1.091 0.888 0.982 2008-Apr-26 18:39:33 LOG4 check_wapp_levels: WAPP-4 power levels: 1.088 1.103 0.948 0.987 2008-Apr-26 18:39:35 INFO5 check_wapp_levels: WAPP power levels are between 1.149 and 1.566 (still bad) 2008-Apr-26 18:39:37 INFO5 check_wapp_levels: WAPP power levels are between 1.149 and 1.565 (still bad) 2008-Apr-26 18:39:39 INFO5 check_wapp_levels: WAPP power levels are between 1.148 and 1.569 (still bad) 2008-Apr-26 18:39:41 INFO5 check_wapp_levels: WAPP power levels are between 1.150 and 1.568 (still bad) 2008-Apr-26 18:39:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-26 18:39:42 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-26 18:39:42 LOG5 end_task: Level: (4) ID = <10046> Status = 0 0 0 0 ok 2008-Apr-26 18:39:42 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-26 18:39:42 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2008-Apr-26 18:39:42 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2008-Apr-26 18:39:42 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2008-Apr-26 18:39:42 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2008-Apr-26 18:39:42 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-26 18:39:42 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32246 J 2008-Apr-26 18:39:42 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.3 2008-Apr-26 18:39:42 LOG2 antvel: Parameters to Doppler: Topocentric 81582 2008 117 0.0 2008-Apr-26 18:39:42 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-26 18:39:42 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2008-Apr-26 18:39:42 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2008-Apr-26 18:39:42 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-26 18:39:42 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-26 18:39:42 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Apr-26 18:39:42 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 18:39:42 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-26 18:39:42 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-26 18:39:42 LOG5 begin_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2008-Apr-26 18:39:42 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-26 18:39:42 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.564376 2008.3224574112101 18.999933 2008-Apr-26 18:39:42 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333340 2008-Apr-26 18:39:42 LOG4 log_alfabeam: ALFABEAM 1 9.709431896610324 21.849823917984889 2008-Apr-26 18:39:42 LOG4 log_alfabeam: ALFABEAM 2 9.715155491929160 21.792682487438000 2008-Apr-26 18:39:42 LOG4 log_alfabeam: ALFABEAM 3 9.722397512752840 21.825801347456881 2008-Apr-26 18:39:42 LOG4 log_alfabeam: ALFABEAM 4 9.723901203069660 21.916978776478441 2008-Apr-26 18:39:42 LOG4 log_alfabeam: ALFABEAM 5 9.718144990506017 21.974258220391604 2008-Apr-26 18:39:42 LOG4 log_alfabeam: ALFABEAM 6 9.710917871959074 21.940222532449056 2008-Apr-26 18:39:42 INFO2 take_spectra: Starting WAPP+GALFA scan: 811700434 2008-Apr-26 18:39:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-26 18:39:43 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-26 18:39:43 LOG5 begin_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2008-Apr-26 18:39:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-26 18:39:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Apr-26 18:39:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 18:39:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:39:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:39:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81584.00 2008-Apr-26 18:39:44 INFO5 check_wapp_levels: WAPP power levels are between 1.148 and 1.569 (still bad) 2008-Apr-26 18:39:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-26 18:39:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-26 18:39:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-26 18:39:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-26 18:39:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-26 18:39:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:39:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:39:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:39:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:39:46 INFO5 check_wapp_levels: WAPP power levels are between 1.128 and 1.508 (still bad) 2008-Apr-26 18:39:48 INFO5 check_wapp_levels: WAPP power levels are between 1.130 and 1.510 (still bad) 2008-Apr-26 18:39:50 INFO5 check_wapp_levels: WAPP power levels are between 1.129 and 1.509 (still bad) 2008-Apr-26 18:39:52 INFO5 check_wapp_levels: WAPP power levels are between 1.130 and 1.509 (still bad) 2008-Apr-26 18:39:54 INFO5 check_wapp_levels: WAPP power levels are between 1.130 and 1.509 (still bad) 2008-Apr-26 18:39:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-26 18:39:54 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-26 18:39:54 LOG5 end_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2008-Apr-26 18:39:54 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-26 18:39:54 LOG5 end_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2008-Apr-26 18:39:54 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2008-Apr-26 18:39:54 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2008-Apr-26 18:39:54 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2008-Apr-26 18:39:54 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-26 18:39:54 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32246 J 2008-Apr-26 18:39:54 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.3 2008-Apr-26 18:39:54 LOG2 antvel: Parameters to Doppler: Topocentric 81594 2008 117 0.0 2008-Apr-26 18:39:54 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-26 18:39:54 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2008-Apr-26 18:39:54 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2008-Apr-26 18:39:54 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-26 18:39:54 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-26 18:39:54 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Apr-26 18:39:54 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 18:39:54 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-26 18:39:54 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-26 18:39:54 LOG5 begin_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2008-Apr-26 18:39:54 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-26 18:39:54 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.567719 2008.3224577914671 18.999933 2008-Apr-26 18:39:54 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666670 21.883333333333333 2008-Apr-26 18:39:54 LOG4 log_alfabeam: ALFABEAM 1 9.709433697446753 21.849748825759317 2008-Apr-26 18:39:54 LOG4 log_alfabeam: ALFABEAM 2 9.715160315308012 21.792667169465371 2008-Apr-26 18:39:54 LOG4 log_alfabeam: ALFABEAM 3 9.722400586321923 21.825860219699535 2008-Apr-26 18:39:54 LOG4 log_alfabeam: ALFABEAM 4 9.723899387215141 21.917054471565606 2008-Apr-26 18:39:54 LOG4 log_alfabeam: ALFABEAM 5 9.718140044705791 21.974274004733584 2008-Apr-26 18:39:54 LOG4 log_alfabeam: ALFABEAM 6 9.710914794002624 21.940161724764451 2008-Apr-26 18:39:54 INFO2 take_spectra: Starting WAPP+GALFA scan: 811700435 2008-Apr-26 18:39:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-26 18:39:55 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-26 18:39:55 LOG5 begin_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2008-Apr-26 18:39:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-26 18:39:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Apr-26 18:39:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 18:39:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:39:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:39:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81596.00 2008-Apr-26 18:39:56 INFO5 check_wapp_levels: WAPP power levels are between 1.130 and 1.509 (still bad) 2008-Apr-26 18:39:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-26 18:39:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-26 18:39:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-26 18:39:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-26 18:39:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-26 18:39:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:39:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:39:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:39:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:39:58 INFO5 check_wapp_levels: WAPP power levels are between 1.125 and 1.507 (still bad) 2008-Apr-26 18:40:00 INFO5 check_wapp_levels: WAPP power levels are between 1.126 and 1.505 (still bad) 2008-Apr-26 18:40:02 INFO5 check_wapp_levels: WAPP power levels are between 1.125 and 1.506 (still bad) 2008-Apr-26 18:40:04 INFO5 check_wapp_levels: WAPP power levels are between 1.125 and 1.508 (still bad) 2008-Apr-26 18:40:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-26 18:40:06 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-26 18:40:06 LOG5 end_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2008-Apr-26 18:40:06 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-26 18:40:06 LOG5 end_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2008-Apr-26 18:40:06 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2008-Apr-26 18:40:06 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2008-Apr-26 18:40:06 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2008-Apr-26 18:40:06 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-26 18:40:06 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32246 J 2008-Apr-26 18:40:06 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.3 2008-Apr-26 18:40:06 LOG2 antvel: Parameters to Doppler: Topocentric 81606 2008 117 0.0 2008-Apr-26 18:40:06 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-26 18:40:06 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2008-Apr-26 18:40:06 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2008-Apr-26 18:40:06 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-26 18:40:06 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-26 18:40:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Apr-26 18:40:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 18:40:06 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-26 18:40:06 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-26 18:40:06 LOG5 begin_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2008-Apr-26 18:40:06 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-26 18:40:06 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.571061 2008.3224581717243 18.999933 2008-Apr-26 18:40:06 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666665 21.883333333333336 2008-Apr-26 18:40:06 LOG4 log_alfabeam: ALFABEAM 1 9.709435509606584 21.849673448934123 2008-Apr-26 18:40:06 LOG4 log_alfabeam: ALFABEAM 2 9.715165158954255 21.792651839965114 2008-Apr-26 18:40:06 LOG4 log_alfabeam: ALFABEAM 3 9.722403669167862 21.825919361271250 2008-Apr-26 18:40:06 LOG4 log_alfabeam: ALFABEAM 4 9.723897559895521 21.917130453973762 2008-Apr-26 18:40:06 LOG4 log_alfabeam: ALFABEAM 5 9.718135077977985 21.974289800877436 2008-Apr-26 18:40:06 LOG4 log_alfabeam: ALFABEAM 6 9.710911706923291 21.940100637872295 2008-Apr-26 18:40:06 INFO2 take_spectra: Starting WAPP+GALFA scan: 811700436 2008-Apr-26 18:40:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-26 18:40:07 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-26 18:40:07 LOG5 begin_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2008-Apr-26 18:40:07 INFO5 check_wapp_levels: WAPP power levels are between 1.127 and 1.506 (still bad) 2008-Apr-26 18:40:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-26 18:40:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Apr-26 18:40:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 18:40:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:40:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:40:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81608.00 2008-Apr-26 18:40:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-26 18:40:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-26 18:40:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-26 18:40:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-26 18:40:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-26 18:40:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:40:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:40:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:40:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:40:09 INFO5 check_wapp_levels: WAPP power levels are between 1.123 and 1.504 (still bad) 2008-Apr-26 18:40:11 INFO5 check_wapp_levels: WAPP power levels are between 1.123 and 1.504 (still bad) 2008-Apr-26 18:40:13 INFO5 check_wapp_levels: WAPP power levels are between 1.121 and 1.505 (still bad) 2008-Apr-26 18:40:15 INFO5 check_wapp_levels: WAPP power levels are between 1.123 and 1.503 (still bad) 2008-Apr-26 18:40:17 INFO5 check_wapp_levels: WAPP power levels are between 1.121 and 1.503 (still bad) 2008-Apr-26 18:40:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-26 18:40:18 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-26 18:40:18 LOG5 end_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2008-Apr-26 18:40:18 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-26 18:40:18 LOG5 end_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2008-Apr-26 18:40:18 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2008-Apr-26 18:40:18 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2008-Apr-26 18:40:18 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2008-Apr-26 18:40:18 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-26 18:40:18 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32246 J 2008-Apr-26 18:40:18 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.3 2008-Apr-26 18:40:18 LOG2 antvel: Parameters to Doppler: Topocentric 81618 2008 117 0.0 2008-Apr-26 18:40:18 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-26 18:40:18 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2008-Apr-26 18:40:18 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2008-Apr-26 18:40:18 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-26 18:40:18 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-26 18:40:18 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Apr-26 18:40:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 18:40:18 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-26 18:40:18 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-26 18:40:18 LOG5 begin_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2008-Apr-26 18:40:18 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-26 18:40:18 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.574404 2008.3224585519813 18.999933 2008-Apr-26 18:40:18 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666663 21.883333333333340 2008-Apr-26 18:40:18 LOG4 log_alfabeam: ALFABEAM 1 9.709437334290879 21.849597739993804 2008-Apr-26 18:40:18 LOG4 log_alfabeam: ALFABEAM 2 9.715170025947325 21.792636489878067 2008-Apr-26 18:40:18 LOG4 log_alfabeam: ALFABEAM 3 9.722406763203177 21.825978810061038 2008-Apr-26 18:40:18 LOG4 log_alfabeam: ALFABEAM 4 9.723895719899081 21.917206771601034 2008-Apr-26 18:40:18 LOG4 log_alfabeam: ALFABEAM 5 9.718130087163654 21.974305618148126 2008-Apr-26 18:40:18 LOG4 log_alfabeam: ALFABEAM 6 9.710908608808676 21.940039232635833 2008-Apr-26 18:40:18 INFO2 take_spectra: Starting WAPP+GALFA scan: 811700437 2008-Apr-26 18:40:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-26 18:40:19 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-26 18:40:19 LOG5 begin_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2008-Apr-26 18:40:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-26 18:40:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Apr-26 18:40:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 18:40:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:40:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:40:19 INFO5 check_wapp_levels: WAPP power levels are between 1.124 and 1.503 (still bad) 2008-Apr-26 18:40:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81620.00 2008-Apr-26 18:40:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-26 18:40:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-26 18:40:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-26 18:40:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-26 18:40:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-26 18:40:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:40:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:40:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:40:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:40:21 INFO5 check_wapp_levels: WAPP power levels are between 1.123 and 1.507 (still bad) 2008-Apr-26 18:40:23 INFO5 check_wapp_levels: WAPP power levels are between 1.125 and 1.505 (still bad) 2008-Apr-26 18:40:25 INFO5 check_wapp_levels: WAPP power levels are between 1.125 and 1.505 (still bad) 2008-Apr-26 18:40:27 INFO5 check_wapp_levels: WAPP power levels are between 1.121 and 1.506 (still bad) 2008-Apr-26 18:40:29 INFO5 check_wapp_levels: WAPP power levels are between 1.121 and 1.507 (still bad) 2008-Apr-26 18:40:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-26 18:40:30 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-26 18:40:30 LOG5 end_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2008-Apr-26 18:40:30 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-26 18:40:30 LOG5 end_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2008-Apr-26 18:40:30 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2008-Apr-26 18:40:30 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2008-Apr-26 18:40:30 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2008-Apr-26 18:40:30 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-26 18:40:30 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32246 J 2008-Apr-26 18:40:30 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.3 2008-Apr-26 18:40:30 LOG2 antvel: Parameters to Doppler: Topocentric 81630 2008 117 0.0 2008-Apr-26 18:40:30 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-26 18:40:30 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2008-Apr-26 18:40:30 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2008-Apr-26 18:40:30 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-26 18:40:30 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-26 18:40:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Apr-26 18:40:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 18:40:30 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-26 18:40:30 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-26 18:40:30 LOG5 begin_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2008-Apr-26 18:40:30 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-26 18:40:30 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.577746 2008.3224589322383 18.999933 2008-Apr-26 18:40:30 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333336 2008-Apr-26 18:40:30 LOG4 log_alfabeam: ALFABEAM 1 9.709439170526013 21.849521741802555 2008-Apr-26 18:40:30 LOG4 log_alfabeam: ALFABEAM 2 9.715174913558128 21.792621128506649 2008-Apr-26 18:40:30 LOG4 log_alfabeam: ALFABEAM 3 9.722409866644906 21.826038533026164 2008-Apr-26 18:40:30 LOG4 log_alfabeam: ALFABEAM 4 9.723893868206970 21.917283381239560 2008-Apr-26 18:40:30 LOG4 log_alfabeam: ALFABEAM 5 9.718125075060057 21.974321446949876 2008-Apr-26 18:40:30 LOG4 log_alfabeam: ALFABEAM 6 9.710905501446849 21.939977543183776 2008-Apr-26 18:40:30 INFO2 take_spectra: Starting WAPP+GALFA scan: 811700438 2008-Apr-26 18:40:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-26 18:40:31 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-26 18:40:31 LOG5 begin_task: Level: (4) ID = <10056> Status = 0 0 0 0 ok 2008-Apr-26 18:40:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-26 18:40:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Apr-26 18:40:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 18:40:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:40:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:40:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81632.00 2008-Apr-26 18:40:32 INFO5 check_wapp_levels: WAPP power levels are between 1.121 and 1.506 (still bad) 2008-Apr-26 18:40:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-26 18:40:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-26 18:40:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-26 18:40:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-26 18:40:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-26 18:40:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:40:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:40:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:40:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:40:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.506 > 1.4)! 2008-Apr-26 18:40:34 LOG4 check_wapp_levels: WAPP-1 power levels: 1.271 1.123 1.242 1.245 2008-Apr-26 18:40:34 LOG4 check_wapp_levels: WAPP-2 power levels: 1.470 1.408 1.465 1.232 2008-Apr-26 18:40:34 LOG4 check_wapp_levels: WAPP-3 power levels: 1.421 1.467 1.207 1.293 2008-Apr-26 18:40:34 LOG4 check_wapp_levels: WAPP-4 power levels: 1.492 1.506 1.302 1.345 2008-Apr-26 18:40:36 INFO5 check_wapp_levels: WAPP power levels are between 1.124 and 1.506 (still bad) 2008-Apr-26 18:40:38 INFO5 check_wapp_levels: WAPP power levels are between 1.122 and 1.506 (still bad) 2008-Apr-26 18:40:40 INFO5 check_wapp_levels: WAPP power levels are between 1.125 and 1.507 (still bad) 2008-Apr-26 18:40:42 INFO5 check_wapp_levels: WAPP power levels are between 1.123 and 1.507 (still bad) 2008-Apr-26 18:40:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-26 18:40:42 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-26 18:40:42 LOG5 end_task: Level: (4) ID = <10056> Status = 0 0 0 0 ok 2008-Apr-26 18:40:42 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-26 18:40:42 LOG5 end_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2008-Apr-26 18:40:42 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2008-Apr-26 18:40:42 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2008-Apr-26 18:40:42 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2008-Apr-26 18:40:42 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-26 18:40:42 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32246 J 2008-Apr-26 18:40:42 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.3 2008-Apr-26 18:40:42 LOG2 antvel: Parameters to Doppler: Topocentric 81642 2008 117 0.0 2008-Apr-26 18:40:42 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-26 18:40:42 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2008-Apr-26 18:40:42 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2008-Apr-26 18:40:42 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-26 18:40:42 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-26 18:40:42 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Apr-26 18:40:42 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 18:40:42 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-26 18:40:42 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-26 18:40:42 LOG5 begin_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2008-Apr-26 18:40:42 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-26 18:40:42 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.581089 2008.3224593124953 18.999933 2008-Apr-26 18:40:42 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333333 2008-Apr-26 18:40:42 LOG4 log_alfabeam: ALFABEAM 1 9.709441019530429 21.849445406424493 2008-Apr-26 18:40:42 LOG4 log_alfabeam: ALFABEAM 2 9.715179824896332 21.792605746781565 2008-Apr-26 18:40:42 LOG4 log_alfabeam: ALFABEAM 3 9.722412981418916 21.826098568460615 2008-Apr-26 18:40:42 LOG4 log_alfabeam: ALFABEAM 4 9.723892003589818 21.917360331211729 2008-Apr-26 18:40:42 LOG4 log_alfabeam: ALFABEAM 5 9.718120038477013 21.974337296617612 2008-Apr-26 18:40:42 LOG4 log_alfabeam: ALFABEAM 6 9.710902382912320 21.939915529960057 2008-Apr-26 18:40:42 INFO2 take_spectra: Starting WAPP+GALFA scan: 811700439 2008-Apr-26 18:40:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-26 18:40:43 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-26 18:40:43 LOG5 begin_task: Level: (4) ID = <10058> Status = 0 0 0 0 ok 2008-Apr-26 18:40:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-26 18:40:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Apr-26 18:40:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 18:40:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:40:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:40:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81644.00 2008-Apr-26 18:40:44 INFO5 check_wapp_levels: WAPP power levels are between 1.122 and 1.507 (still bad) 2008-Apr-26 18:40:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-26 18:40:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-26 18:40:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-26 18:40:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-26 18:40:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-26 18:40:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:40:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:40:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:40:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:40:46 INFO5 check_wapp_levels: WAPP power levels are between 1.124 and 1.508 (still bad) 2008-Apr-26 18:40:48 INFO5 check_wapp_levels: WAPP power levels are between 1.125 and 1.509 (still bad) 2008-Apr-26 18:40:50 INFO5 check_wapp_levels: WAPP power levels are between 1.123 and 1.509 (still bad) 2008-Apr-26 18:40:52 INFO5 check_wapp_levels: WAPP power levels are between 1.125 and 1.509 (still bad) 2008-Apr-26 18:40:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-26 18:40:54 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-26 18:40:54 LOG5 end_task: Level: (4) ID = <10058> Status = 0 0 0 0 ok 2008-Apr-26 18:40:54 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-26 18:40:54 LOG5 end_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2008-Apr-26 18:40:54 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2008-Apr-26 18:40:54 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2008-Apr-26 18:40:54 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2008-Apr-26 18:40:54 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-26 18:40:54 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-26 18:40:54 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-26 18:40:54 LOG5 begin_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2008-Apr-26 18:40:54 INFO5 check_wapp_levels: WAPP power levels are between 1.124 and 1.510 (still bad) 2008-Apr-26 18:40:54 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-26 18:40:54 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-26 18:40:54 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-26 18:40:54 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-26 18:40:54 LOG5 end_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2008-Apr-26 18:40:54 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2008-Apr-26 18:40:54 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2008-Apr-26 18:40:54 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2008-Apr-26 18:40:54 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2008-Apr-26 18:40:54 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-26 18:40:54 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32246 J 2008-Apr-26 18:40:54 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.3 2008-Apr-26 18:40:54 LOG2 antvel: Parameters to Doppler: Topocentric 81654 2008 117 0.0 2008-Apr-26 18:40:54 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-26 18:40:54 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2008-Apr-26 18:40:54 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2008-Apr-26 18:40:54 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-26 18:40:54 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-26 18:40:54 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Apr-26 18:40:54 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 18:40:54 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-26 18:40:54 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-26 18:40:54 LOG5 begin_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2008-Apr-26 18:40:54 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-26 18:40:54 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.584431 2008.3224596927523 18.999933 2008-Apr-26 18:40:54 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333329 2008-Apr-26 18:40:54 LOG4 log_alfabeam: ALFABEAM 1 9.709442880318994 21.849368777049424 2008-Apr-26 18:40:54 LOG4 log_alfabeam: ALFABEAM 2 9.715184757210299 21.792590354033280 2008-Apr-26 18:40:54 LOG4 log_alfabeam: ALFABEAM 3 9.722416105730874 21.826158883028519 2008-Apr-26 18:40:54 LOG4 log_alfabeam: ALFABEAM 4 9.723890127040431 21.917437577980778 2008-Apr-26 18:40:54 LOG4 log_alfabeam: ALFABEAM 5 9.718114980235050 21.974353157526402 2008-Apr-26 18:40:54 LOG4 log_alfabeam: ALFABEAM 6 9.710899255004442 21.939853227397531 2008-Apr-26 18:40:54 INFO2 take_spectra: Starting WAPP+GALFA scan: 811700440 2008-Apr-26 18:40:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-26 18:40:55 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-26 18:40:55 LOG5 begin_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2008-Apr-26 18:40:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-26 18:40:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Apr-26 18:40:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 18:40:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:40:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:40:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81656.00 2008-Apr-26 18:40:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-26 18:40:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-26 18:40:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-26 18:40:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-26 18:40:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-26 18:40:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:40:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:40:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:40:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:40:57 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.942 and 1.272 2008-Apr-26 18:41:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-26 18:41:06 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-26 18:41:06 LOG5 end_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2008-Apr-26 18:41:06 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-26 18:41:06 LOG5 end_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2008-Apr-26 18:41:06 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2008-Apr-26 18:41:06 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2008-Apr-26 18:41:06 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2008-Apr-26 18:41:06 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-26 18:41:06 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32246 J 2008-Apr-26 18:41:06 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.3 2008-Apr-26 18:41:06 LOG2 antvel: Parameters to Doppler: Topocentric 81666 2008 117 0.0 2008-Apr-26 18:41:06 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-26 18:41:06 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2008-Apr-26 18:41:06 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2008-Apr-26 18:41:06 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-26 18:41:06 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-26 18:41:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Apr-26 18:41:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 18:41:06 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-26 18:41:06 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-26 18:41:06 LOG5 begin_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2008-Apr-26 18:41:06 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-26 18:41:06 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.587773 2008.3224600730096 18.999933 2008-Apr-26 18:41:06 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333329 2008-Apr-26 18:41:06 LOG4 log_alfabeam: ALFABEAM 1 9.709444753565540 21.849291828386825 2008-Apr-26 18:41:06 LOG4 log_alfabeam: ALFABEAM 2 9.715189712154460 21.792574945795693 2008-Apr-26 18:41:06 LOG4 log_alfabeam: ALFABEAM 3 9.722419240580567 21.826219497254311 2008-Apr-26 18:41:06 LOG4 log_alfabeam: ALFABEAM 4 9.723888237878608 21.917515147041588 2008-Apr-26 18:41:06 LOG4 log_alfabeam: ALFABEAM 5 9.718109898636266 21.974369034267401 2008-Apr-26 18:41:06 LOG4 log_alfabeam: ALFABEAM 6 9.710896116725083 21.939790614294818 2008-Apr-26 18:41:06 INFO2 take_spectra: Starting WAPP+GALFA scan: 811700441 2008-Apr-26 18:41:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-26 18:41:07 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-26 18:41:07 LOG5 begin_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2008-Apr-26 18:41:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-26 18:41:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Apr-26 18:41:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 18:41:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:41:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:41:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81668.00 2008-Apr-26 18:41:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-26 18:41:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-26 18:41:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-26 18:41:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-26 18:41:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-26 18:41:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:41:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:41:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:41:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:41:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-26 18:41:18 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-26 18:41:18 LOG5 end_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2008-Apr-26 18:41:18 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-26 18:41:18 LOG5 end_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2008-Apr-26 18:41:18 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2008-Apr-26 18:41:18 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2008-Apr-26 18:41:18 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2008-Apr-26 18:41:18 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-26 18:41:18 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32246 J 2008-Apr-26 18:41:18 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.3 2008-Apr-26 18:41:18 LOG2 antvel: Parameters to Doppler: Topocentric 81678 2008 117 0.0 2008-Apr-26 18:41:18 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-26 18:41:18 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2008-Apr-26 18:41:18 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2008-Apr-26 18:41:18 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-26 18:41:18 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-26 18:41:18 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Apr-26 18:41:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 18:41:18 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-26 18:41:18 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-26 18:41:18 LOG5 begin_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2008-Apr-26 18:41:18 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-26 18:41:18 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.591116 2008.3224604532666 18.999933 2008-Apr-26 18:41:18 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333347 2008-Apr-26 18:41:18 LOG4 log_alfabeam: ALFABEAM 1 9.709446639960403 21.849214534738660 2008-Apr-26 18:41:18 LOG4 log_alfabeam: ALFABEAM 2 9.715194691412394 21.792559517589051 2008-Apr-26 18:41:18 LOG4 log_alfabeam: ALFABEAM 3 9.722422386980947 21.826280432051089 2008-Apr-26 18:41:18 LOG4 log_alfabeam: ALFABEAM 4 9.723886335407480 21.917593064300323 2008-Apr-26 18:41:18 LOG4 log_alfabeam: ALFABEAM 5 9.718104791952674 21.974384931445435 2008-Apr-26 18:41:18 LOG4 log_alfabeam: ALFABEAM 6 9.710892967063208 21.939727669047823 2008-Apr-26 18:41:18 INFO2 take_spectra: Starting WAPP+GALFA scan: 811700442 2008-Apr-26 18:41:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-26 18:41:19 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-26 18:41:19 LOG5 begin_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2008-Apr-26 18:41:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-26 18:41:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Apr-26 18:41:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 18:41:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:41:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:41:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81680.00 2008-Apr-26 18:41:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-26 18:41:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-26 18:41:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-26 18:41:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-26 18:41:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-26 18:41:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:41:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:41:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:41:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:41:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-26 18:41:30 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-26 18:41:30 LOG5 end_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2008-Apr-26 18:41:30 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-26 18:41:30 LOG5 end_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2008-Apr-26 18:41:30 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2008-Apr-26 18:41:30 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2008-Apr-26 18:41:30 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2008-Apr-26 18:41:30 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-26 18:41:30 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32246 J 2008-Apr-26 18:41:30 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.3 2008-Apr-26 18:41:30 LOG2 antvel: Parameters to Doppler: Topocentric 81690 2008 117 0.0 2008-Apr-26 18:41:30 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-26 18:41:30 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2008-Apr-26 18:41:30 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2008-Apr-26 18:41:30 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-26 18:41:30 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-26 18:41:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Apr-26 18:41:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 18:41:30 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-26 18:41:30 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-26 18:41:30 LOG5 begin_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2008-Apr-26 18:41:30 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-26 18:41:30 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.594458 2008.3224608335236 18.999933 2008-Apr-26 18:41:30 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666665 21.883333333333329 2008-Apr-26 18:41:30 LOG4 log_alfabeam: ALFABEAM 1 9.709448538500803 21.849136939792121 2008-Apr-26 18:41:30 LOG4 log_alfabeam: ALFABEAM 2 9.715199692198002 21.792544078786037 2008-Apr-26 18:41:30 LOG4 log_alfabeam: ALFABEAM 3 9.722425543120329 21.826341653634696 2008-Apr-26 18:41:30 LOG4 log_alfabeam: ALFABEAM 4 9.723884420637674 21.917671285717901 2008-Apr-26 18:41:30 LOG4 log_alfabeam: ALFABEAM 5 9.718099663040348 21.974400839391610 2008-Apr-26 18:41:30 LOG4 log_alfabeam: ALFABEAM 6 9.710889807835352 21.939664426554661 2008-Apr-26 18:41:30 INFO2 take_spectra: Starting WAPP+GALFA scan: 811700443 2008-Apr-26 18:41:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-26 18:41:31 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-26 18:41:31 LOG5 begin_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2008-Apr-26 18:41:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-26 18:41:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Apr-26 18:41:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 18:41:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:41:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:41:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81692.00 2008-Apr-26 18:41:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-26 18:41:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-26 18:41:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-26 18:41:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-26 18:41:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-26 18:41:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:41:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:41:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:41:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:41:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-26 18:41:42 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-26 18:41:42 LOG5 end_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2008-Apr-26 18:41:42 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-26 18:41:42 LOG5 end_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2008-Apr-26 18:41:42 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2008-Apr-26 18:41:42 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2008-Apr-26 18:41:42 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2008-Apr-26 18:41:42 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-26 18:41:42 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32246 J 2008-Apr-26 18:41:42 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.3 2008-Apr-26 18:41:42 LOG2 antvel: Parameters to Doppler: Topocentric 81702 2008 117 0.0 2008-Apr-26 18:41:42 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-26 18:41:42 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2008-Apr-26 18:41:42 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2008-Apr-26 18:41:42 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-26 18:41:42 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-26 18:41:42 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Apr-26 18:41:42 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 18:41:42 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-26 18:41:42 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-26 18:41:42 LOG5 begin_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2008-Apr-26 18:41:42 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-26 18:41:42 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.597801 2008.3224612137806 18.999933 2008-Apr-26 18:41:42 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333347 2008-Apr-26 18:41:42 LOG4 log_alfabeam: ALFABEAM 1 9.709450450450372 21.849058994529223 2008-Apr-26 18:41:42 LOG4 log_alfabeam: ALFABEAM 2 9.715204717698994 21.792528620295013 2008-Apr-26 18:41:42 LOG4 log_alfabeam: ALFABEAM 3 9.722428710958750 21.826403201345713 2008-Apr-26 18:41:42 LOG4 log_alfabeam: ALFABEAM 4 9.723882492294074 21.917749860708785 2008-Apr-26 18:41:42 LOG4 log_alfabeam: ALFABEAM 5 9.718094508628594 21.974416767462348 2008-Apr-26 18:41:42 LOG4 log_alfabeam: ALFABEAM 6 9.710886637082606 21.939600846175587 2008-Apr-26 18:41:42 INFO2 take_spectra: Starting WAPP+GALFA scan: 811700444 2008-Apr-26 18:41:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-26 18:41:43 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-26 18:41:43 LOG5 begin_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2008-Apr-26 18:41:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-26 18:41:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Apr-26 18:41:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 18:41:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:41:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:41:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81704.00 2008-Apr-26 18:41:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-26 18:41:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-26 18:41:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-26 18:41:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-26 18:41:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-26 18:41:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:41:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:41:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:41:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:41:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-26 18:41:54 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-26 18:41:54 LOG5 end_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2008-Apr-26 18:41:54 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-26 18:41:54 LOG5 end_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2008-Apr-26 18:41:54 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2008-Apr-26 18:41:54 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2008-Apr-26 18:41:54 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2008-Apr-26 18:41:54 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-26 18:41:54 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32246 J 2008-Apr-26 18:41:54 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.3 2008-Apr-26 18:41:54 LOG2 antvel: Parameters to Doppler: Topocentric 81714 2008 117 0.0 2008-Apr-26 18:41:54 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-26 18:41:54 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2008-Apr-26 18:41:54 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2008-Apr-26 18:41:54 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-26 18:41:54 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-26 18:41:54 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Apr-26 18:41:54 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 18:41:54 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-26 18:41:54 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-26 18:41:54 LOG5 begin_task: Level: (3) ID = <10070> Status = 0 0 0 0 ok 2008-Apr-26 18:41:54 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-26 18:41:54 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.601143 2008.3224615940376 18.999933 2008-Apr-26 18:41:54 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666670 21.883333333333347 2008-Apr-26 18:41:54 LOG4 log_alfabeam: ALFABEAM 1 9.709452374794326 21.848980742974852 2008-Apr-26 18:41:54 LOG4 log_alfabeam: ALFABEAM 2 9.715209765105865 21.792513151516953 2008-Apr-26 18:41:54 LOG4 log_alfabeam: ALFABEAM 3 9.722431888672780 21.826465041095272 2008-Apr-26 18:41:54 LOG4 log_alfabeam: ALFABEAM 4 9.723880551399477 21.917828744892901 2008-Apr-26 18:41:54 LOG4 log_alfabeam: ALFABEAM 5 9.718089331597650 21.974432705959241 2008-Apr-26 18:41:54 LOG4 log_alfabeam: ALFABEAM 6 9.710883456633137 21.939536963124848 2008-Apr-26 18:41:54 INFO2 take_spectra: Starting WAPP+GALFA scan: 811700445 2008-Apr-26 18:41:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-26 18:41:55 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-26 18:41:55 LOG5 begin_task: Level: (4) ID = <10071> Status = 0 0 0 0 ok 2008-Apr-26 18:41:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-26 18:41:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Apr-26 18:41:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 18:41:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:41:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:41:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81716.00 2008-Apr-26 18:41:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-26 18:41:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-26 18:41:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-26 18:41:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-26 18:41:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-26 18:41:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:41:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:41:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:41:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:42:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-26 18:42:06 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-26 18:42:06 LOG5 end_task: Level: (4) ID = <10071> Status = 0 0 0 0 ok 2008-Apr-26 18:42:06 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-26 18:42:06 LOG5 end_task: Level: (3) ID = <10070> Status = 0 0 0 0 ok 2008-Apr-26 18:42:06 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2008-Apr-26 18:42:06 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2008-Apr-26 18:42:06 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2008-Apr-26 18:42:06 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-26 18:42:06 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32246 J 2008-Apr-26 18:42:06 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.3 2008-Apr-26 18:42:06 LOG2 antvel: Parameters to Doppler: Topocentric 81726 2008 117 0.0 2008-Apr-26 18:42:06 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-26 18:42:06 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2008-Apr-26 18:42:06 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2008-Apr-26 18:42:06 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-26 18:42:06 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-26 18:42:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Apr-26 18:42:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 18:42:06 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-26 18:42:06 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-26 18:42:06 LOG5 begin_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2008-Apr-26 18:42:06 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-26 18:42:06 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.604486 2008.3224619742948 18.999933 2008-Apr-26 18:42:06 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666665 21.883333333333340 2008-Apr-26 18:42:06 LOG4 log_alfabeam: ALFABEAM 1 9.709454312815065 21.848902135665259 2008-Apr-26 18:42:06 LOG4 log_alfabeam: ALFABEAM 2 9.715214837638529 21.792497663352762 2008-Apr-26 18:42:06 LOG4 log_alfabeam: ALFABEAM 3 9.722435078236440 21.826527212656810 2008-Apr-26 18:42:06 LOG4 log_alfabeam: ALFABEAM 4 9.723878596659738 21.917907988134534 2008-Apr-26 18:42:06 LOG4 log_alfabeam: ALFABEAM 5 9.718084128643564 21.974448664245763 2008-Apr-26 18:42:06 LOG4 log_alfabeam: ALFABEAM 6 9.710880264514346 21.939472736314649 2008-Apr-26 18:42:06 INFO2 take_spectra: Starting WAPP+GALFA scan: 811700446 2008-Apr-26 18:42:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-26 18:42:07 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-26 18:42:07 LOG5 begin_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2008-Apr-26 18:42:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-26 18:42:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Apr-26 18:42:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 18:42:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:42:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:42:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81728.00 2008-Apr-26 18:42:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-26 18:42:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-26 18:42:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-26 18:42:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-26 18:42:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-26 18:42:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:42:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:42:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:42:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:42:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-26 18:42:18 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-26 18:42:18 LOG5 end_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2008-Apr-26 18:42:18 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-26 18:42:18 LOG5 end_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2008-Apr-26 18:42:18 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2008-Apr-26 18:42:18 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-26 18:42:18 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-26 18:42:18 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-26 18:42:18 LOG5 begin_task: Level: (3) ID = <10074> Status = 0 0 0 0 ok 2008-Apr-26 18:42:18 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-26 18:42:18 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-26 18:42:18 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-26 18:42:18 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-26 18:42:18 LOG5 end_task: Level: (3) ID = <10074> Status = 0 0 0 0 ok 2008-Apr-26 18:42:18 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2008-Apr-26 18:42:18 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2008-Apr-26 18:42:18 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2008-Apr-26 18:42:18 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-26 18:42:18 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32246 J 2008-Apr-26 18:42:18 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.3 2008-Apr-26 18:42:18 LOG2 antvel: Parameters to Doppler: Topocentric 81738 2008 117 0.0 2008-Apr-26 18:42:18 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-26 18:42:18 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2008-Apr-26 18:42:18 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2008-Apr-26 18:42:18 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-26 18:42:18 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-26 18:42:18 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Apr-26 18:42:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 18:42:18 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-26 18:42:18 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-26 18:42:18 LOG5 begin_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2008-Apr-26 18:42:18 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-26 18:42:18 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.607828 2008.3224623545518 18.999933 2008-Apr-26 18:42:18 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333329 2008-Apr-26 18:42:18 LOG4 log_alfabeam: ALFABEAM 1 9.709456263485604 21.848823216967990 2008-Apr-26 18:42:18 LOG4 log_alfabeam: ALFABEAM 2 9.715219932463729 21.792482165231778 2008-Apr-26 18:42:18 LOG4 log_alfabeam: ALFABEAM 3 9.722438277814389 21.826589681631958 2008-Apr-26 18:42:18 LOG4 log_alfabeam: ALFABEAM 4 9.723876629110027 21.917987545707561 2008-Apr-26 18:42:18 LOG4 log_alfabeam: ALFABEAM 5 9.718078902671097 21.974464632593975 2008-Apr-26 18:42:18 LOG4 log_alfabeam: ALFABEAM 6 9.710877062566226 21.939408201280351 2008-Apr-26 18:42:18 INFO2 take_spectra: Starting WAPP+GALFA scan: 811700447 2008-Apr-26 18:42:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-26 18:42:19 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-26 18:42:19 LOG5 begin_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2008-Apr-26 18:42:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-26 18:42:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Apr-26 18:42:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 18:42:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:42:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:42:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81740.00 2008-Apr-26 18:42:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-26 18:42:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-26 18:42:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-26 18:42:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-26 18:42:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-26 18:42:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:42:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:42:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:42:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:42:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.544 > 1.4)! 2008-Apr-26 18:42:21 LOG4 check_wapp_levels: WAPP-1 power levels: 1.319 1.138 1.303 1.262 2008-Apr-26 18:42:21 LOG4 check_wapp_levels: WAPP-2 power levels: 1.491 1.448 1.544 1.255 2008-Apr-26 18:42:21 LOG4 check_wapp_levels: WAPP-3 power levels: 1.480 1.493 1.287 1.335 2008-Apr-26 18:42:21 LOG4 check_wapp_levels: WAPP-4 power levels: 1.517 1.514 1.322 1.349 2008-Apr-26 18:42:23 INFO5 check_wapp_levels: WAPP power levels are between 1.137 and 1.540 (still bad) 2008-Apr-26 18:42:25 INFO5 check_wapp_levels: WAPP power levels are between 1.136 and 1.542 (still bad) 2008-Apr-26 18:42:27 INFO5 check_wapp_levels: WAPP power levels are between 1.135 and 1.542 (still bad) 2008-Apr-26 18:42:29 INFO5 check_wapp_levels: WAPP power levels are between 1.137 and 1.542 (still bad) 2008-Apr-26 18:42:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-26 18:42:30 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-26 18:42:30 LOG5 end_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2008-Apr-26 18:42:30 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-26 18:42:30 LOG5 end_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2008-Apr-26 18:42:30 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2008-Apr-26 18:42:30 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2008-Apr-26 18:42:30 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2008-Apr-26 18:42:30 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-26 18:42:30 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32246 J 2008-Apr-26 18:42:30 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.3 2008-Apr-26 18:42:30 LOG2 antvel: Parameters to Doppler: Topocentric 81750 2008 117 0.0 2008-Apr-26 18:42:30 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-26 18:42:30 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2008-Apr-26 18:42:30 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2008-Apr-26 18:42:30 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-26 18:42:30 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-26 18:42:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Apr-26 18:42:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 18:42:30 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-26 18:42:30 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-26 18:42:30 LOG5 begin_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2008-Apr-26 18:42:30 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-26 18:42:30 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.611171 2008.3224627348088 18.999933 2008-Apr-26 18:42:30 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666670 21.883333333333340 2008-Apr-26 18:42:30 LOG4 log_alfabeam: ALFABEAM 1 9.709458228107527 21.848743936965899 2008-Apr-26 18:42:30 LOG4 log_alfabeam: ALFABEAM 2 9.715225052834191 21.792466648048325 2008-Apr-26 18:42:30 LOG4 log_alfabeam: ALFABEAM 3 9.722441489394827 21.826652488235446 2008-Apr-26 18:42:30 LOG4 log_alfabeam: ALFABEAM 4 9.723874647436743 21.918067467933795 2008-Apr-26 18:42:30 LOG4 log_alfabeam: ALFABEAM 5 9.718073650342442 21.974480620373427 2008-Apr-26 18:42:30 LOG4 log_alfabeam: ALFABEAM 6 9.710873848802308 21.939343316477384 2008-Apr-26 18:42:30 INFO2 take_spectra: Starting WAPP+GALFA scan: 811700448 2008-Apr-26 18:42:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-26 18:42:31 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-26 18:42:31 LOG5 begin_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2008-Apr-26 18:42:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-26 18:42:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Apr-26 18:42:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 18:42:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:42:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:42:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81752.00 2008-Apr-26 18:42:32 INFO5 check_wapp_levels: WAPP power levels are between 1.137 and 1.541 (still bad) 2008-Apr-26 18:42:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-26 18:42:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-26 18:42:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-26 18:42:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-26 18:42:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-26 18:42:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:42:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:42:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:42:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:42:34 INFO5 check_wapp_levels: WAPP power levels are between 1.118 and 1.497 (still bad) 2008-Apr-26 18:42:36 INFO5 check_wapp_levels: WAPP power levels are between 1.119 and 1.498 (still bad) 2008-Apr-26 18:42:38 INFO5 check_wapp_levels: WAPP power levels are between 1.115 and 1.496 (still bad) 2008-Apr-26 18:42:40 INFO5 check_wapp_levels: WAPP power levels are between 1.116 and 1.498 (still bad) 2008-Apr-26 18:42:42 INFO5 check_wapp_levels: WAPP power levels are between 1.115 and 1.495 (still bad) 2008-Apr-26 18:42:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-26 18:42:42 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-26 18:42:42 LOG5 end_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2008-Apr-26 18:42:42 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-26 18:42:42 LOG5 end_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2008-Apr-26 18:42:42 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2008-Apr-26 18:42:42 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2008-Apr-26 18:42:42 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2008-Apr-26 18:42:42 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-26 18:42:42 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32246 J 2008-Apr-26 18:42:42 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.3 2008-Apr-26 18:42:42 LOG2 antvel: Parameters to Doppler: Topocentric 81762 2008 117 0.0 2008-Apr-26 18:42:42 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-26 18:42:42 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2008-Apr-26 18:42:42 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2008-Apr-26 18:42:42 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-26 18:42:42 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-26 18:42:42 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Apr-26 18:42:42 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 18:42:42 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-26 18:42:42 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-26 18:42:42 LOG5 begin_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2008-Apr-26 18:42:42 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-26 18:42:42 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.614513 2008.3224631150658 18.999933 2008-Apr-26 18:42:42 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333347 2008-Apr-26 18:42:42 LOG4 log_alfabeam: ALFABEAM 1 9.709460205641415 21.848664340374217 2008-Apr-26 18:42:42 LOG4 log_alfabeam: ALFABEAM 2 9.715230195892511 21.792451121260282 2008-Apr-26 18:42:42 LOG4 log_alfabeam: ALFABEAM 3 9.722444711130326 21.826715597754536 2008-Apr-26 18:42:42 LOG4 log_alfabeam: ALFABEAM 4 9.723872652687621 21.918147709736076 2008-Apr-26 18:42:42 LOG4 log_alfabeam: ALFABEAM 5 9.718068374587261 21.974496617826496 2008-Apr-26 18:42:42 LOG4 log_alfabeam: ALFABEAM 6 9.710870625074540 21.939278117767273 2008-Apr-26 18:42:42 INFO2 take_spectra: Starting WAPP+GALFA scan: 811700449 2008-Apr-26 18:42:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-26 18:42:43 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-26 18:42:43 LOG5 begin_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2008-Apr-26 18:42:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-26 18:42:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Apr-26 18:42:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 18:42:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:42:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:42:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81764.00 2008-Apr-26 18:42:44 INFO5 check_wapp_levels: WAPP power levels are between 1.115 and 1.495 (still bad) 2008-Apr-26 18:42:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-26 18:42:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-26 18:42:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-26 18:42:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-26 18:42:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-26 18:42:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:42:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:42:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:42:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:42:46 INFO5 check_wapp_levels: WAPP power levels are between 1.115 and 1.494 (still bad) 2008-Apr-26 18:42:48 INFO5 check_wapp_levels: WAPP power levels are between 1.114 and 1.496 (still bad) 2008-Apr-26 18:42:50 INFO5 check_wapp_levels: WAPP power levels are between 1.113 and 1.493 (still bad) 2008-Apr-26 18:42:52 INFO5 check_wapp_levels: WAPP power levels are between 1.116 and 1.493 (still bad) 2008-Apr-26 18:42:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-26 18:42:54 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-26 18:42:54 LOG5 end_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2008-Apr-26 18:42:54 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-26 18:42:54 LOG5 end_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2008-Apr-26 18:42:54 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2008-Apr-26 18:42:54 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2008-Apr-26 18:42:54 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2008-Apr-26 18:42:54 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-26 18:42:54 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32246 J 2008-Apr-26 18:42:54 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.3 2008-Apr-26 18:42:54 LOG2 antvel: Parameters to Doppler: Topocentric 81774 2008 117 0.0 2008-Apr-26 18:42:54 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-26 18:42:54 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2008-Apr-26 18:42:54 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2008-Apr-26 18:42:54 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-26 18:42:54 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-26 18:42:54 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Apr-26 18:42:54 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 18:42:54 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-26 18:42:54 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-26 18:42:54 LOG5 begin_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2008-Apr-26 18:42:54 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-26 18:42:54 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.617856 2008.3224634953228 18.999933 2008-Apr-26 18:42:54 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333340 2008-Apr-26 18:42:54 LOG4 log_alfabeam: ALFABEAM 1 9.709462197408495 21.848584376814635 2008-Apr-26 18:42:54 LOG4 log_alfabeam: ALFABEAM 2 9.715235364924851 21.792435575756151 2008-Apr-26 18:42:54 LOG4 log_alfabeam: ALFABEAM 3 9.722447945023475 21.826779050853769 2008-Apr-26 18:42:54 LOG4 log_alfabeam: ALFABEAM 4 9.723870643529210 21.918228321901402 2008-Apr-26 18:42:54 LOG4 log_alfabeam: ALFABEAM 5 9.718063072033253 21.974512634327837 2008-Apr-26 18:42:54 LOG4 log_alfabeam: ALFABEAM 6 9.710867389382431 21.939212563139765 2008-Apr-26 18:42:54 INFO2 take_spectra: Starting WAPP+GALFA scan: 811700450 2008-Apr-26 18:42:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-26 18:42:55 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-26 18:42:55 LOG5 begin_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2008-Apr-26 18:42:55 INFO5 check_wapp_levels: WAPP power levels are between 1.116 and 1.493 (still bad) 2008-Apr-26 18:42:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-26 18:42:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Apr-26 18:42:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 18:42:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:42:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:42:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81776.00 2008-Apr-26 18:42:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-26 18:42:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-26 18:42:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-26 18:42:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-26 18:42:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-26 18:42:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:42:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:42:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:42:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:42:57 INFO5 check_wapp_levels: WAPP power levels are between 1.115 and 1.493 (still bad) 2008-Apr-26 18:42:59 INFO5 check_wapp_levels: WAPP power levels are between 1.112 and 1.493 (still bad) 2008-Apr-26 18:43:01 INFO5 check_wapp_levels: WAPP power levels are between 1.113 and 1.493 (still bad) 2008-Apr-26 18:43:03 INFO5 check_wapp_levels: WAPP power levels are between 1.112 and 1.491 (still bad) 2008-Apr-26 18:43:05 INFO5 check_wapp_levels: WAPP power levels are between 1.113 and 1.493 (still bad) 2008-Apr-26 18:43:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-26 18:43:06 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-26 18:43:06 LOG5 end_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2008-Apr-26 18:43:06 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-26 18:43:06 LOG5 end_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2008-Apr-26 18:43:06 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2008-Apr-26 18:43:06 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2008-Apr-26 18:43:06 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2008-Apr-26 18:43:06 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-26 18:43:06 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32246 J 2008-Apr-26 18:43:06 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.3 2008-Apr-26 18:43:06 LOG2 antvel: Parameters to Doppler: Topocentric 81786 2008 117 0.0 2008-Apr-26 18:43:06 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-26 18:43:06 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2008-Apr-26 18:43:06 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2008-Apr-26 18:43:06 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-26 18:43:06 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-26 18:43:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Apr-26 18:43:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 18:43:06 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-26 18:43:06 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-26 18:43:06 LOG5 begin_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2008-Apr-26 18:43:06 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-26 18:43:06 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.621198 2008.3224638755801 18.999933 2008-Apr-26 18:43:06 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666663 21.883333333333319 2008-Apr-26 18:43:06 LOG4 log_alfabeam: ALFABEAM 1 9.709464202356706 21.848504091355238 2008-Apr-26 18:43:06 LOG4 log_alfabeam: ALFABEAM 2 9.715240557049315 21.792420021022529 2008-Apr-26 18:43:06 LOG4 log_alfabeam: ALFABEAM 3 9.722451189214610 21.826842812501166 2008-Apr-26 18:43:06 LOG4 log_alfabeam: ALFABEAM 4 9.723868621022021 21.918309258996416 2008-Apr-26 18:43:06 LOG4 log_alfabeam: ALFABEAM 5 9.718057745635379 21.974528660090055 2008-Apr-26 18:43:06 LOG4 log_alfabeam: ALFABEAM 6 9.710864143590040 21.939146688787716 2008-Apr-26 18:43:06 INFO2 take_spectra: Starting WAPP+GALFA scan: 811700451 2008-Apr-26 18:43:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-26 18:43:07 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-26 18:43:07 LOG5 begin_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2008-Apr-26 18:43:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-26 18:43:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Apr-26 18:43:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 18:43:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:43:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:43:07 INFO5 check_wapp_levels: WAPP power levels are between 1.114 and 1.493 (still bad) 2008-Apr-26 18:43:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81788.00 2008-Apr-26 18:43:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-26 18:43:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-26 18:43:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-26 18:43:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-26 18:43:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-26 18:43:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:43:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:43:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:43:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:43:09 INFO5 check_wapp_levels: WAPP power levels are between 1.114 and 1.493 (still bad) 2008-Apr-26 18:43:11 INFO5 check_wapp_levels: WAPP power levels are between 1.111 and 1.496 (still bad) 2008-Apr-26 18:43:13 INFO5 check_wapp_levels: WAPP power levels are between 1.110 and 1.496 (still bad) 2008-Apr-26 18:43:15 INFO5 check_wapp_levels: WAPP power levels are between 1.110 and 1.495 (still bad) 2008-Apr-26 18:43:17 INFO5 check_wapp_levels: WAPP power levels are between 1.113 and 1.496 (still bad) 2008-Apr-26 18:43:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-26 18:43:18 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-26 18:43:18 LOG5 end_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2008-Apr-26 18:43:18 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-26 18:43:18 LOG5 end_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2008-Apr-26 18:43:18 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2008-Apr-26 18:43:18 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2008-Apr-26 18:43:18 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2008-Apr-26 18:43:18 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-26 18:43:18 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32246 J 2008-Apr-26 18:43:18 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.3 2008-Apr-26 18:43:18 LOG2 antvel: Parameters to Doppler: Topocentric 81798 2008 117 0.0 2008-Apr-26 18:43:18 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-26 18:43:18 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2008-Apr-26 18:43:18 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2008-Apr-26 18:43:18 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-26 18:43:18 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-26 18:43:18 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Apr-26 18:43:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 18:43:18 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-26 18:43:18 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-26 18:43:18 LOG5 begin_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2008-Apr-26 18:43:18 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-26 18:43:18 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.624541 2008.3224642558371 18.999933 2008-Apr-26 18:43:18 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333333 2008-Apr-26 18:43:18 LOG4 log_alfabeam: ALFABEAM 1 9.709466221827325 21.848423433148657 2008-Apr-26 18:43:18 LOG4 log_alfabeam: ALFABEAM 2 9.715245775586101 21.792404447943241 2008-Apr-26 18:43:18 LOG4 log_alfabeam: ALFABEAM 3 9.722454445720869 21.826906923819973 2008-Apr-26 18:43:18 LOG4 log_alfabeam: ALFABEAM 4 9.723866583812269 21.918390572281449 2008-Apr-26 18:43:18 LOG4 log_alfabeam: ALFABEAM 5 9.718052391986179 21.974544704491880 2008-Apr-26 18:43:18 LOG4 log_alfabeam: ALFABEAM 6 9.710860885682658 21.939080452226129 2008-Apr-26 18:43:18 INFO2 take_spectra: Starting WAPP+GALFA scan: 811700452 2008-Apr-26 18:43:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-26 18:43:19 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-26 18:43:19 LOG5 begin_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2008-Apr-26 18:43:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-26 18:43:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Apr-26 18:43:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 18:43:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:43:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:43:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81800.00 2008-Apr-26 18:43:20 INFO5 check_wapp_levels: WAPP power levels are between 1.110 and 1.494 (still bad) 2008-Apr-26 18:43:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-26 18:43:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-26 18:43:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-26 18:43:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-26 18:43:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-26 18:43:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:43:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:43:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:43:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:43:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.497 > 1.4)! 2008-Apr-26 18:43:22 LOG4 check_wapp_levels: WAPP-1 power levels: 1.250 1.114 1.233 1.241 2008-Apr-26 18:43:22 LOG4 check_wapp_levels: WAPP-2 power levels: 1.466 1.395 1.441 1.216 2008-Apr-26 18:43:22 LOG4 check_wapp_levels: WAPP-3 power levels: 1.403 1.446 1.193 1.277 2008-Apr-26 18:43:22 LOG4 check_wapp_levels: WAPP-4 power levels: 1.487 1.497 1.293 1.337 2008-Apr-26 18:43:24 INFO5 check_wapp_levels: WAPP power levels are between 1.112 and 1.496 (still bad) 2008-Apr-26 18:43:26 INFO5 check_wapp_levels: WAPP power levels are between 1.112 and 1.496 (still bad) 2008-Apr-26 18:43:28 INFO5 check_wapp_levels: WAPP power levels are between 1.112 and 1.495 (still bad) 2008-Apr-26 18:43:30 INFO5 check_wapp_levels: WAPP power levels are between 1.111 and 1.496 (still bad) 2008-Apr-26 18:43:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-26 18:43:30 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-26 18:43:30 LOG5 end_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2008-Apr-26 18:43:30 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-26 18:43:30 LOG5 end_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2008-Apr-26 18:43:30 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2008-Apr-26 18:43:30 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2008-Apr-26 18:43:30 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2008-Apr-26 18:43:30 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-26 18:43:30 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32246 J 2008-Apr-26 18:43:30 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.3 2008-Apr-26 18:43:30 LOG2 antvel: Parameters to Doppler: Topocentric 81810 2008 117 0.0 2008-Apr-26 18:43:30 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-26 18:43:30 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2008-Apr-26 18:43:30 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2008-Apr-26 18:43:30 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-26 18:43:30 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-26 18:43:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Apr-26 18:43:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 18:43:30 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-26 18:43:30 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-26 18:43:30 LOG5 begin_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2008-Apr-26 18:43:30 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-26 18:43:30 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.627883 2008.3224646360941 18.999933 2008-Apr-26 18:43:30 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666663 21.883333333333336 2008-Apr-26 18:43:30 LOG4 log_alfabeam: ALFABEAM 1 9.709468254755445 21.848342447621018 2008-Apr-26 18:43:30 LOG4 log_alfabeam: ALFABEAM 2 9.715251017628427 21.792388866033569 2008-Apr-26 18:43:30 LOG4 log_alfabeam: ALFABEAM 3 9.722457712670186 21.826971349453846 2008-Apr-26 18:43:30 LOG4 log_alfabeam: ALFABEAM 4 9.723864532973483 21.918472215961550 2008-Apr-26 18:43:30 LOG4 log_alfabeam: ALFABEAM 5 9.718047014066306 21.974560757715988 2008-Apr-26 18:43:30 LOG4 log_alfabeam: ALFABEAM 6 9.710857617536625 21.939013889984356 2008-Apr-26 18:43:30 INFO2 take_spectra: Starting WAPP+GALFA scan: 811700453 2008-Apr-26 18:43:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-26 18:43:31 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-26 18:43:31 LOG5 begin_task: Level: (4) ID = <10088> Status = 0 0 0 0 ok 2008-Apr-26 18:43:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-26 18:43:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Apr-26 18:43:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 18:43:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:43:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:43:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81812.00 2008-Apr-26 18:43:32 INFO5 check_wapp_levels: WAPP power levels are between 1.111 and 1.496 (still bad) 2008-Apr-26 18:43:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-26 18:43:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-26 18:43:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-26 18:43:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-26 18:43:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-26 18:43:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:43:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:43:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:43:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:43:34 INFO5 check_wapp_levels: WAPP power levels are between 1.115 and 1.498 (still bad) 2008-Apr-26 18:43:36 INFO5 check_wapp_levels: WAPP power levels are between 1.114 and 1.498 (still bad) 2008-Apr-26 18:43:38 INFO5 check_wapp_levels: WAPP power levels are between 1.113 and 1.496 (still bad) 2008-Apr-26 18:43:40 INFO5 check_wapp_levels: WAPP power levels are between 1.113 and 1.498 (still bad) 2008-Apr-26 18:43:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-26 18:43:42 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-26 18:43:42 LOG5 end_task: Level: (4) ID = <10088> Status = 0 0 0 0 ok 2008-Apr-26 18:43:42 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-26 18:43:42 LOG5 end_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2008-Apr-26 18:43:42 INFO2 smartfreq: Switching off CAL 2008-Apr-26 18:43:42 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-26 18:43:42 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-26 18:43:42 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-26 18:43:42 LOG5 begin_task: Level: (3) ID = <10089> Status = 0 0 0 0 ok 2008-Apr-26 18:43:42 INFO5 check_wapp_levels: WAPP power levels are between 1.113 and 1.498 (still bad) 2008-Apr-26 18:43:42 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-26 18:43:42 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-26 18:43:42 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-26 18:43:42 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-26 18:43:42 LOG5 end_task: Level: (3) ID = <10089> Status = 0 0 0 0 ok 2008-Apr-26 18:43:42 INFO3 restore_frequencies: Restoring original frequencies 2008-Apr-26 18:43:42 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-26 18:43:42 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.32247 J 2008-Apr-26 18:43:42 LOG2 antvel: Computed apparent RA = 09:43:29.2 Dec = +21:50:44.3 2008-Apr-26 18:43:42 LOG2 antvel: Parameters to Doppler: Topocentric 81822 2008 117 0.0 2008-Apr-26 18:43:42 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-26 18:43:42 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.2 rest0=1381.2 rest1=1381.2 rest2=1381.2 rest3=1381.2 rest4=1381.2 rest5=1381.2 rest6=1381.2 rest7=1381.2 2008-Apr-26 18:43:42 INFO4 dopset_gen: New sky frequencies: 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 2008-Apr-26 18:43:42 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.200000 sky0=1381.200000 sky1=1381.200000 sky2=1381.200000 sky3=1381.200000 sky4=1381.200000 sky5=1381.200000 sky6=1381.200000 sky7=1381.200000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-26 18:43:42 LOG2 dopset_gen: Result from 'sky2syn': 1631.200000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-26 18:43:42 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2008-Apr-26 18:43:42 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 18:43:42 STOP finish_task: Finishing task 'smart frequency switching' 2008-Apr-26 18:43:42 LOG5 finish_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2008-Apr-26 18:43:42 DONE finish_task: DONE finished pattern: smart frequency switching 2008-Apr-26 18:43:42 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-26 18:43:42 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2008-Apr-26 18:43:42 LOG5 end_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2008-Apr-26 18:43:42 NOTE run_command_file: DONE with command file processing 2008-Apr-26 18:43:42 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2008-Apr-26 18:43:42 STOP finish_task: Finishing task 'running command file 'command_galfasrc.cmd'' 2008-Apr-26 18:43:42 LOG5 finish_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Apr-26 18:43:42 DONE finish_task: DONE finished running: command file 'command_galfasrc.cmd' 2008-Apr-26 18:43:42 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-26 18:43:43 END end_task: Finishing task 'running command file 'command_galfasrc.cmd'' with status 'OK' 2008-Apr-26 18:43:43 LOG5 end_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Apr-26 18:43:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2008-Apr-26 18:43:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 18:43:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:43:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:46:03 INFO1 CIMA-run_command_file: Transferring command file '080426_obs.cmd ' to executive ... 2008-Apr-26 18:46:03 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 3 {LOAD ages_config.conf} 2008-Apr-26 18:46:03 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 4 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5} 2008-Apr-26 18:46:03 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {FIXEDDRIFT az=246.81 alfaangle=-50.2 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_013 ra=95300.00 dec=233500.00} 2008-Apr-26 18:46:03 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 11 {FIXEDDRIFT az=237.00 alfaangle=-37.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_015 ra=95300.00 dec=233200.00} 2008-Apr-26 18:46:03 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 15 {FIXEDDRIFT az=210.25 alfaangle=-8.5 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_017 ra=95300.00 dec=232900.00} 2008-Apr-26 18:46:03 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 19 {FIXEDDRIFT az=149.50 alfaangle=47.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_019 ra=95300.00 dec=232600.00} 2008-Apr-26 18:46:03 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 23 {FIXEDDRIFT az=122.23 alfaangle=76.2 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_021 ra=95300.00 dec=232300.00} 2008-Apr-26 18:46:03 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 27 {FIXEDDRIFT az=112.25 alfaangle=-90.5 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_023 ra=95300.00 dec=232000.00} 2008-Apr-26 18:46:03 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 31 {FIXEDDRIFT az=313.29 alfaangle=58.9 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_069 ra=120900.00 dec=71800.00} 2008-Apr-26 18:46:03 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 35 {FIXEDDRIFT az=332.61 alfaangle=41.9 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_071 ra=120900.00 dec=71500.00} 2008-Apr-26 18:46:03 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 39 {FIXEDDRIFT az=0.00 alfaangle=19.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_073 ra=120900.00 dec=71200.00} 2008-Apr-26 18:46:03 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 43 {FIXEDDRIFT az=27.19 alfaangle=-3.5 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_075 ra=120900.00 dec=70900.00} 2008-Apr-26 18:46:03 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 47 {FIXEDDRIFT az=46.20 alfaangle=-20.2 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_077 ra=120900.00 dec=70600.00} 2008-Apr-26 18:46:03 LOG4 exec_msg: From OBSERVER: store_command_file_line 14 51 {FIXEDDRIFT az=47.75 alfaangle=-21.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p1_063 ra=122900.00 dec=72700.00} 2008-Apr-26 18:46:03 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-Apr-26 18:46:03 LOG4 exec_msg: From OBSERVER: run_command_file 080426_obs.cmd 1 1 14 2008-Apr-26 18:46:03 LOG4 run_command_file: Calling 'run_command_file 080426_obs.cmd 1 1 14' 2008-Apr-26 18:46:03 BEGIN begin_task: Starting task 'running command file '080426_obs.cmd'' 2008-Apr-26 18:46:03 LOG5 begin_task: Level: (1) ID = <10090> Status = 0 0 0 0 ok 2008-Apr-26 18:46:03 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '080426_obs.cmd' ...} 2008-Apr-26 18:46:03 NOTE run_command_file: Starting execution of command file '080426_obs.cmd' from line 1 2008-Apr-26 18:46:03 COMMAND run_command_line: EXECUTING command 3: 'LOAD ages_config.conf' 2008-Apr-26 18:46:03 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2008-Apr-26 18:46:04 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-26 18:46:04 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2008-Apr-26 18:46:04 NOTE CIMA-load_config_file: Loading configuration file 'ages_config.conf' 2008-Apr-26 18:46:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Apr-26 18:46:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Apr-26 18:46:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Apr-26 18:46:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Apr-26 18:46:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Apr-26 18:46:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2008-Apr-26 18:46:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Apr-26 18:46:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786" 2008-Apr-26 18:46:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786" 2008-Apr-26 18:46:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786" 2008-Apr-26 18:46:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786" 2008-Apr-26 18:46:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786" 2008-Apr-26 18:46:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786" 2008-Apr-26 18:46:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786" 2008-Apr-26 18:46:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786" 2008-Apr-26 18:46:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786" 2008-Apr-26 18:46:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Apr-26 18:46:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Apr-26 18:46:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Apr-26 18:46:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Apr-26 18:46:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Apr-26 18:46:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Apr-26 18:46:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Apr-26 18:46:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Apr-26 18:46:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Apr-26 18:46:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Apr-26 18:46:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Apr-26 18:46:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Apr-26 18:46:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Apr-26 18:46:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2008-Apr-26 18:46:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Apr-26 18:46:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Apr-26 18:46:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Apr-26 18:46:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Apr-26 18:46:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Apr-26 18:46:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Apr-26 18:46:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Apr-26 18:46:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Apr-26 18:46:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Apr-26 18:46:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1670.405752" 2008-Apr-26 18:46:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Apr-26 18:46:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Apr-26 18:46:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Apr-26 18:46:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Apr-26 18:46:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Apr-26 18:46:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Apr-26 18:46:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Apr-26 18:46:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Apr-26 18:46:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Apr-26 18:46:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Apr-26 18:46:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Apr-26 18:46:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Apr-26 18:46:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Apr-26 18:46:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Apr-26 18:46:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Apr-26 18:46:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Apr-26 18:46:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Apr-26 18:46:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Apr-26 18:46:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Apr-26 18:46:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Apr-26 18:46:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Apr-26 18:46:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Apr-26 18:46:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Apr-26 18:46:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Apr-26 18:46:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Apr-26 18:46:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Apr-26 18:46:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Apr-26 18:46:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Apr-26 18:46:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Apr-26 18:46:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Apr-26 18:46:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Apr-26 18:46:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Apr-26 18:46:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Apr-26 18:46:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Apr-26 18:46:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Apr-26 18:46:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Apr-26 18:46:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Apr-26 18:46:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Apr-26 18:46:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Apr-26 18:46:06 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-26 18:46:06 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Apr-26 18:46:06 LOG5 begin_task: Level: (2) ID = <10091> Status = 0 0 0 0 ok 2008-Apr-26 18:46:06 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Apr-26 18:46:06 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Apr-26 18:46:06 LOG1 config_iflo: Receiver ALFA already selected 2008-Apr-26 18:46:06 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-26 18:46:06 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-26 18:46:06 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-26 18:46:06 LOG5 begin_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2008-Apr-26 18:46:06 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-26 18:46:06 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-26 18:46:06 LOG5 end_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2008-Apr-26 18:46:06 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-26 18:46:06 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-26 18:46:06 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2008-Apr-26 18:46:06 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2008-Apr-26 18:46:06 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Apr-26 18:46:06 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Apr-26 18:46:06 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2008-Apr-26 18:46:06 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2008-Apr-26 18:46:06 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2008-Apr-26 18:46:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1670405752.0} 2008-Apr-26 18:46:06 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2008-Apr-26 18:46:06 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2008-Apr-26 18:46:06 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Apr-26 18:46:06 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Apr-26 18:46:06 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Apr-26 18:46:06 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Apr-26 18:46:06 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Apr-26 18:46:06 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2008-Apr-26 18:46:06 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2008-Apr-26 18:46:06 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2008-Apr-26 18:46:06 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2008-Apr-26 18:46:06 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Apr-26 18:46:06 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2008-Apr-26 18:46:06 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2008-Apr-26 18:46:06 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Apr-26 18:46:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 18:46:06 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2008-Apr-26 18:46:06 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2008-Apr-26 18:46:06 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Apr-26 18:46:06 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2008-Apr-26 18:46:06 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2008-Apr-26 18:46:06 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Apr-26 18:46:06 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 18:46:06 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Apr-26 18:46:06 LOG5 begin_task: Level: (3) ID = <10093> Status = 0 0 0 0 ok 2008-Apr-26 18:46:06 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1670405752.0} 2008-Apr-26 18:46:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Apr-26 18:46:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 18:46:06 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 18:46:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:46:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:46:06 LOG4 got_cormsg: From DATATAKING: vw% DONE 2008-Apr-26 18:46:06 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Apr-26 18:46:06 LOG5 end_task: Level: (3) ID = <10093> Status = 0 0 0 0 ok 2008-Apr-26 18:46:06 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Apr-26 18:46:06 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Apr-26 18:46:06 LOG5 finish_task: Level: (2) ID = <10091> Status = 0 0 0 0 ok 2008-Apr-26 18:46:06 DONE finish_task: DONE finished configuration: IF/LO path 2008-Apr-26 18:46:06 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-26 18:46:06 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Apr-26 18:46:06 LOG5 end_task: Level: (2) ID = <10091> Status = 0 0 0 0 ok 2008-Apr-26 18:46:06 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Apr-26 18:46:06 LOG5 begin_task: Level: (2) ID = <10094> Status = 0 0 0 0 ok 2008-Apr-26 18:46:06 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Apr-26 18:46:06 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Apr-26 18:46:06 START begin_task: Starting task 'selecting calibration port' 2008-Apr-26 18:46:06 LOG5 begin_task: Level: (3) ID = <10095> Status = 0 0 0 0 ok 2008-Apr-26 18:46:06 LOG3 vw_send: To DATATAKING: calport 3 2008-Apr-26 18:46:06 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Apr-26 18:46:07 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 18:46:07 START begin_task: Starting task 'waiting on calport' 2008-Apr-26 18:46:07 LOG5 begin_task: Level: (4) ID = <10096> Status = 0 0 0 0 ok 2008-Apr-26 18:46:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:46:07 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Apr-26 18:46:07 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 18:46:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:46:07 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-26 18:46:07 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Apr-26 18:46:07 LOG5 end_task: Level: (4) ID = <10096> Status = 0 0 0 0 ok 2008-Apr-26 18:46:07 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Apr-26 18:46:07 STOP finish_task: Finishing task 'selecting calibration port' 2008-Apr-26 18:46:07 LOG5 finish_task: Level: (3) ID = <10095> Status = 0 0 0 0 ok 2008-Apr-26 18:46:07 INFO2 finish_task: DONE finished configuring: calibration port 2008-Apr-26 18:46:07 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 18:46:07 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Apr-26 18:46:07 LOG5 end_task: Level: (3) ID = <10095> Status = 0 0 0 0 ok 2008-Apr-26 18:46:07 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Apr-26 18:46:07 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Apr-26 18:46:07 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Apr-26 18:46:07 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Apr-26 18:46:07 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Apr-26 18:46:07 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Apr-26 18:46:07 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Apr-26 18:46:07 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Apr-26 18:46:07 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 SS 2008-Apr-26 18:46:07 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 SS 2008-Apr-26 18:46:07 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 SS 2008-Apr-26 18:46:07 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 SS 2008-Apr-26 18:46:07 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Apr-26 18:46:07 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Apr-26 18:46:07 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-26 18:46:07 LOG5 begin_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2008-Apr-26 18:46:07 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Apr-26 18:46:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:46:07 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-26 18:46:07 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Apr-26 18:46:07 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-26 18:46:07 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 SS' 2008-Apr-26 18:46:07 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-26 18:46:07 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-26 18:46:07 LOG5 end_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2008-Apr-26 18:46:07 LOG3 sock_errsend: To WAPPDATA: FLUSH 2008-Apr-26 18:46:07 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Apr-26 18:46:07 LOG5 finish_task: Level: (2) ID = <10094> Status = 0 0 0 0 ok 2008-Apr-26 18:46:07 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Apr-26 18:46:07 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-26 18:46:07 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Apr-26 18:46:07 LOG5 end_task: Level: (2) ID = <10094> Status = 0 0 0 0 ok 2008-Apr-26 18:46:07 COMMAND run_command_line: EXECUTING command 4: 'SETUP FIXEDDRIFT calwhen=tracking calsecs=5' 2008-Apr-26 18:46:07 COMMAND run_command_line: EXECUTING command 7: 'FIXEDDRIFT az=246.81 alfaangle=-50.2 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_013 ra=95300.00 dec=233500.00' 2008-Apr-26 18:46:08 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-26 18:46:08 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Apr-26 18:46:08 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-26 18:46:09 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 246.81 -50.2 hcorcal 5 tracking no first 1 AGES3193_p2_013 95300.00 233500.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-26 18:46:09 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-26 18:46:09 LOG5 begin_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2008-Apr-26 18:46:09 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'galfasrc' 2008-Apr-26 18:46:09 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-26 18:46:09 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p2_013} 2008-Apr-26 18:46:09 INFO3 fixed_driftmap: Sending telescope to Az = 246.81 and ZA = 14.71 2008-Apr-26 18:46:09 LOG3 track_source: Calling 'track_source AGES3193_p2_013 246.81 14.7087761022 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-26 18:46:09 START begin_task: Starting task 'sending tracking commands' 2008-Apr-26 18:46:09 LOG5 begin_task: Level: (3) ID = <10099> Status = 0 0 0 0 ok 2008-Apr-26 18:46:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_013} INFO {Slewing to source 'AGES3193_p2_013' ...} 2008-Apr-26 18:46:09 INFO1 track_source: Starting to track AGES3193_p2_013 2008-Apr-26 18:46:09 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_013" 2008-Apr-26 18:46:09 LOG3 vw_send: To DATATAKING: set ra 246.81 2008-Apr-26 18:46:09 LOG3 vw_send: To DATATAKING: set dec 14.7087761022 2008-Apr-26 18:46:09 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-26 18:46:09 LOG3 vw_send: To DATATAKING: pnt tr 246.81 14.7087761022 -CF 2008-Apr-26 18:46:09 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-26 18:46:09 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-26 18:46:09 LOG5 finish_task: Level: (3) ID = <10099> Status = 0 0 0 0 ok 2008-Apr-26 18:46:09 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-26 18:46:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 18:46:09 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-26 18:46:09 LOG5 end_task: Level: (3) ID = <10099> Status = 0 0 0 0 ok 2008-Apr-26 18:46:09 START begin_task: Starting task 'rotate ALFA to -50.2 degrees' 2008-Apr-26 18:46:09 LOG5 begin_task: Level: (3) ID = <10100> Status = 0 0 0 0 ok 2008-Apr-26 18:46:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -50.2 degrees ...} 2008-Apr-26 18:46:09 INFO2 rotate_alfa: ALFA commanded to -50.2 degrees 2008-Apr-26 18:46:09 LOG3 sock_errsend: To ALFAMOTOR: POSITION -50.2 REPLY 2008-Apr-26 18:46:09 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-26 18:46:09 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-26 18:46:09 LOG5 begin_task: Level: (4) ID = <10101> Status = 0 0 0 0 ok 2008-Apr-26 18:46:09 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_013" 2008-Apr-26 18:46:09 LOG4 got_cormsg: From DATATAKING: set ra 246.81 2008-Apr-26 18:46:09 LOG4 got_cormsg: From DATATAKING: set dec 14.7087761022 2008-Apr-26 18:46:09 LOG4 got_cormsg: From DATATAKING: vw% 246.81 2008-Apr-26 18:46:09 LOG4 got_cormsg: From DATATAKING: vw% 14.7087761022 2008-Apr-26 18:46:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:46:09 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-26 18:46:09 LOG4 got_cormsg: From DATATAKING: pnt tr 246.81 14.7087761022 -CF 2008-Apr-26 18:46:09 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-26 18:46:09 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-26 18:46:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:46:48 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-26 18:46:48 INFO3 alfa_motor: ALFA rotator in-position -50.20 degrees 2008-Apr-26 18:46:48 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-26 18:46:48 LOG5 end_task: Level: (4) ID = <10101> Status = 0 0 0 0 ok 2008-Apr-26 18:46:48 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-26 18:46:48 STOP finish_task: Finishing task 'rotate ALFA to -50.2 degrees' 2008-Apr-26 18:46:48 LOG5 finish_task: Level: (3) ID = <10100> Status = 0 0 0 0 ok 2008-Apr-26 18:46:48 INFO2 finish_task: DONE finished configuration: rotating ALFA to -50.2 degrees 2008-Apr-26 18:46:48 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 18:46:48 STOP end_task: Finishing task 'rotate ALFA to -50.2 degrees' with status 'OK' 2008-Apr-26 18:46:48 LOG5 end_task: Level: (3) ID = <10100> Status = 0 0 0 0 ok 2008-Apr-26 18:46:48 START begin_task: Starting task 'waiting on telescope' 2008-Apr-26 18:46:48 LOG5 begin_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2008-Apr-26 18:46:48 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-26 18:46:49 LOG3 waittrk: Start waittrk 5 2008-Apr-26 18:46:49 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-26 18:46:49 LOG5 begin_task: Level: (4) ID = <10103> Status = 0 0 0 0 ok 2008-Apr-26 18:46:54 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-26 18:46:54 LOG5 end_task: Level: (4) ID = <10103> Status = 0 0 0 0 ok 2008-Apr-26 18:46:54 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-26 18:46:54 LOG5 begin_task: Level: (4) ID = <10104> Status = 0 0 0 0 ok 2008-Apr-26 18:46:54 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-26 18:46:54 LOG5 end_task: Level: (4) ID = <10104> Status = 0 0 0 0 ok 2008-Apr-26 18:46:54 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-26 18:46:54 INFO2 waittrk: Now tracking AGES3193_p2_013 2008-Apr-26 18:46:54 LOG4 waittrk: Current telescope position: Az = 246.37 ZA = 14.72 2008-Apr-26 18:46:54 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-26 18:46:54 LOG5 finish_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2008-Apr-26 18:46:54 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-26 18:46:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 18:46:54 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-26 18:46:54 LOG5 end_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2008-Apr-26 18:46:54 START begin_task: Starting task 'selecting calibration type' 2008-Apr-26 18:46:54 LOG5 begin_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2008-Apr-26 18:46:54 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-26 18:46:54 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-26 18:46:54 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 18:46:54 START begin_task: Starting task 'waiting on setcal' 2008-Apr-26 18:46:54 LOG5 begin_task: Level: (4) ID = <10106> Status = 0 0 0 0 ok 2008-Apr-26 18:46:54 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-26 18:46:54 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 18:46:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:46:54 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-26 18:46:54 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-26 18:46:54 LOG5 end_task: Level: (4) ID = <10106> Status = 0 0 0 0 ok 2008-Apr-26 18:46:54 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-26 18:46:54 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-26 18:46:54 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-26 18:46:54 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-26 18:46:54 LOG5 begin_task: Level: (4) ID = <10107> Status = 0 0 0 0 ok 2008-Apr-26 18:46:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:46:54 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-26 18:46:54 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-26 18:46:54 LOG5 end_task: Level: (4) ID = <10107> Status = 0 0 0 0 ok 2008-Apr-26 18:46:54 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-26 18:46:54 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-26 18:46:54 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-26 18:46:54 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-26 18:46:54 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-26 18:46:54 LOG5 begin_task: Level: (4) ID = <10108> Status = 0 0 0 0 ok 2008-Apr-26 18:46:54 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-26 18:46:54 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-26 18:46:54 LOG5 end_task: Level: (4) ID = <10108> Status = 0 0 0 0 ok 2008-Apr-26 18:46:54 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-26 18:46:54 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-26 18:46:54 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-26 18:46:54 LOG5 finish_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2008-Apr-26 18:46:54 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-26 18:46:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 18:46:54 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-26 18:46:54 LOG5 end_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2008-Apr-26 18:46:54 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2008-Apr-26 18:46:54 INFO2 astwait: Waiting for 742 seconds from 22:46:54 to 22:59:16 UTC ... 2008-Apr-26 18:46:54 LOG4 send_obs_status: To obs_status: <1> TASKTIME 742 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-26 18:46:54 START begin_task: Starting task 'waiting on waiting for AST time' 2008-Apr-26 18:46:54 LOG5 begin_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2008-Apr-26 18:59:16 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2008-Apr-26 18:59:16 LOG5 end_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2008-Apr-26 18:59:16 INFO3 astwait: Finished waiting 2008-Apr-26 18:59:16 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-26 18:59:16 LOG5 dopset_later: Calling 'dopset_later 61.464883202462907' 2008-Apr-26 18:59:16 INFO3 dopset_later: Setting Doppler correction for 19:00:16 (61.5 seconds from now) 2008-Apr-26 18:59:16 LOG5 antvel: Calling 'antvel 246.810000 14.708776 F 61.464883202462907' 2008-Apr-26 18:59:16 LOG2 antvel: Parameters to Doppler: Heliocentric 82816 2008 117 0.0 2008-Apr-26 18:59:16 INFO5 antvel: Computed antenna velocity: +27.85629 km/s 2008-Apr-26 18:59:16 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=27.8562867801 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-26 18:59:16 INFO4 dopset_gen: New sky frequencies: 1381.115097 1381.115097 1381.115097 1381.115097 1381.115097 1381.115097 1381.115097 1381.115097 1381.115097 2008-Apr-26 18:59:16 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.115097 sky0=1381.115097 sky1=1381.115097 sky2=1381.115097 sky3=1381.115097 sky4=1381.115097 sky5=1381.115097 sky6=1381.115097 sky7=1381.115097 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-26 18:59:16 LOG2 dopset_gen: Result from 'sky2syn': 1631.115097 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-26 18:59:16 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631115097.0} 2008-Apr-26 18:59:16 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 18:59:16 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-26 18:59:16 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-26 18:59:16 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:02.6 Dec = +23:35:02.0 2008-Apr-26 18:59:16 LOG3 track_source: Calling 'track_source AGES3193_p2_013 095202.6 233502.0 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-26 18:59:16 START begin_task: Starting task 'sending tracking commands' 2008-Apr-26 18:59:16 LOG5 begin_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2008-Apr-26 18:59:16 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_013} INFO {Slewing to source 'AGES3193_p2_013' ...} 2008-Apr-26 18:59:16 INFO1 track_source: Starting to track AGES3193_p2_013 2008-Apr-26 18:59:16 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_013" 2008-Apr-26 18:59:16 LOG3 vw_send: To DATATAKING: set ra 095202.6 2008-Apr-26 18:59:16 LOG3 vw_send: To DATATAKING: set dec 233502.0 2008-Apr-26 18:59:16 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-26 18:59:16 LOG3 vw_send: To DATATAKING: pnt tr 095202.6 233502.0 -CJ 2008-Apr-26 18:59:16 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-26 18:59:16 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-26 18:59:16 LOG5 finish_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2008-Apr-26 18:59:16 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-26 18:59:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 18:59:16 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-26 18:59:16 LOG5 end_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2008-Apr-26 18:59:16 START begin_task: Starting task 'waiting on telescope' 2008-Apr-26 18:59:16 LOG5 begin_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2008-Apr-26 18:59:16 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-26 18:59:16 LOG3 waittrk: Start waittrk 5 2008-Apr-26 18:59:16 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-26 18:59:16 LOG5 begin_task: Level: (4) ID = <10112> Status = 0 0 0 0 ok 2008-Apr-26 18:59:16 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631115097.0} 2008-Apr-26 18:59:16 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 18:59:16 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_013" 2008-Apr-26 18:59:16 LOG4 got_cormsg: From DATATAKING: set ra 095202.6 2008-Apr-26 18:59:16 LOG4 got_cormsg: From DATATAKING: set dec 233502.0 2008-Apr-26 18:59:16 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2008-Apr-26 18:59:16 LOG4 got_cormsg: From DATATAKING: 095202.6 2008-Apr-26 18:59:16 LOG4 got_cormsg: From DATATAKING: vw% 233502.0 2008-Apr-26 18:59:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:59:16 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-26 18:59:16 LOG4 got_cormsg: From DATATAKING: pnt tr 095202.6 233502.0 -CJ 2008-Apr-26 18:59:16 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-26 18:59:16 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-26 18:59:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:59:21 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-26 18:59:21 LOG5 end_task: Level: (4) ID = <10112> Status = 0 0 0 0 ok 2008-Apr-26 18:59:21 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-26 18:59:21 LOG5 begin_task: Level: (4) ID = <10113> Status = 0 0 0 0 ok 2008-Apr-26 18:59:23 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-26 18:59:23 LOG5 end_task: Level: (4) ID = <10113> Status = 0 0 0 0 ok 2008-Apr-26 18:59:23 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-26 18:59:23 INFO2 waittrk: Now tracking AGES3193_p2_013 2008-Apr-26 18:59:23 LOG4 waittrk: Current telescope position: Az = 246.34 ZA = 14.71 2008-Apr-26 18:59:23 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-26 18:59:23 LOG5 finish_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2008-Apr-26 18:59:23 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-26 18:59:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 18:59:23 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-26 18:59:23 LOG5 end_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2008-Apr-26 18:59:23 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-26 18:59:23 LOG5 begin_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2008-Apr-26 18:59:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-26 18:59:23 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-26 18:59:23 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-26 18:59:23 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-26 18:59:23 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 18:59:23 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-26 18:59:23 LOG5 begin_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2008-Apr-26 18:59:23 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-26 18:59:23 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 18:59:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:59:26 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-26 18:59:26 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-26 18:59:26 LOG5 end_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2008-Apr-26 18:59:26 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-26 18:59:26 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-26 18:59:26 LOG5 begin_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2008-Apr-26 18:59:26 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-26 18:59:26 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-26 18:59:26 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-26 18:59:26 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-26 18:59:26 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-26 18:59:26 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-26 18:59:26 LOG5 begin_task: Level: (5) ID = <10117> Status = 0 0 0 0 ok 2008-Apr-26 18:59:26 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-26 18:59:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:59:27 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 1 dB --- beam 1: 8 6 dB 2008-Apr-26 18:59:27 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 6 dB 2008-Apr-26 18:59:27 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-26 18:59:27 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 3 3 dB 2008-Apr-26 18:59:27 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-26 18:59:27 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-26 18:59:27 LOG5 end_task: Level: (5) ID = <10117> Status = 0 0 0 0 ok 2008-Apr-26 18:59:27 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.924 1.045 ALFA beam 1: 0.892 1.050 2008-Apr-26 18:59:27 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.071 0.958 ALFA beam 3: 1.024 1.059 2008-Apr-26 18:59:27 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.959 0.996 ALFA beam 5: 1.095 0.961 2008-Apr-26 18:59:27 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.098 1.059 ALFA beam 7: 0.955 0.946 2008-Apr-26 18:59:27 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-26 18:59:27 LOG5 finish_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2008-Apr-26 18:59:27 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-26 18:59:27 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 18:59:27 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-26 18:59:27 LOG5 end_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2008-Apr-26 18:59:27 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-26 18:59:27 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-26 18:59:27 LOG5 finish_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2008-Apr-26 18:59:27 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-26 18:59:27 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 18:59:27 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-26 18:59:27 LOG5 end_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2008-Apr-26 18:59:27 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 SS 2008-Apr-26 18:59:27 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 SS 2008-Apr-26 18:59:27 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 SS 2008-Apr-26 18:59:27 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 SS 2008-Apr-26 18:59:27 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-26 18:59:27 START begin_task: Starting task 'WAPP calibration' 2008-Apr-26 18:59:27 LOG5 begin_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2008-Apr-26 18:59:27 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-26 18:59:27 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-26 18:59:27 START begin_task: Starting task 'selecting calibration type' 2008-Apr-26 18:59:27 LOG5 begin_task: Level: (4) ID = <10119> Status = 0 0 0 0 ok 2008-Apr-26 18:59:27 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-26 18:59:27 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-26 18:59:27 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 18:59:27 START begin_task: Starting task 'waiting on setcal' 2008-Apr-26 18:59:27 LOG5 begin_task: Level: (5) ID = <10120> Status = 0 0 0 0 ok 2008-Apr-26 18:59:27 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 SS' 2008-Apr-26 18:59:27 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-26 18:59:27 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 18:59:27 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:59:27 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-26 18:59:27 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-26 18:59:27 LOG5 end_task: Level: (5) ID = <10120> Status = 0 0 0 0 ok 2008-Apr-26 18:59:27 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-26 18:59:27 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-26 18:59:28 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-26 18:59:28 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-26 18:59:28 LOG5 begin_task: Level: (5) ID = <10121> Status = 0 0 0 0 ok 2008-Apr-26 18:59:28 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:59:28 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-26 18:59:28 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-26 18:59:28 LOG5 end_task: Level: (5) ID = <10121> Status = 0 0 0 0 ok 2008-Apr-26 18:59:28 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-26 18:59:28 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-26 18:59:28 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-26 18:59:28 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-26 18:59:28 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-26 18:59:28 LOG5 begin_task: Level: (5) ID = <10122> Status = 0 0 0 0 ok 2008-Apr-26 18:59:28 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-26 18:59:28 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-26 18:59:28 LOG5 end_task: Level: (5) ID = <10122> Status = 0 0 0 0 ok 2008-Apr-26 18:59:28 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-26 18:59:28 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-26 18:59:28 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-26 18:59:28 LOG5 finish_task: Level: (4) ID = <10119> Status = 0 0 0 0 ok 2008-Apr-26 18:59:28 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-26 18:59:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 18:59:28 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-26 18:59:28 LOG5 end_task: Level: (4) ID = <10119> Status = 0 0 0 0 ok 2008-Apr-26 18:59:28 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-26 18:59:28 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-26 18:59:28 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-26 18:59:28 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-26 18:59:28 LOG5 begin_task: Level: (4) ID = <10123> Status = 0 0 0 0 ok 2008-Apr-26 18:59:28 NOTE WAPPDATA-new_file: New FITS file: wapp.20080426.a2048.0001.fits 2008-Apr-26 18:59:28 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-26 18:59:28 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080426.a2048.0001.fits} 2008-Apr-26 18:59:28 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-26 18:59:28 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-26 18:59:28 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-26 18:59:28 LOG5 end_task: Level: (4) ID = <10123> Status = 0 0 0 0 ok 2008-Apr-26 18:59:28 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-26 18:59:28 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-26 18:59:28 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-26 18:59:28 LOG5 begin_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2008-Apr-26 18:59:28 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-26 18:59:28 LOG5 log_alfabeam: Parameters: 9.8673888888888914 23.583888888888886 8.894723 2008.3224949932821 -50.200077 2008-Apr-26 18:59:28 LOG4 log_alfabeam: ALFABEAM 0 9.867388888888890 23.583888888888900 2008-Apr-26 18:59:28 LOG4 log_alfabeam: ALFABEAM 1 9.868132846492333 23.492630771031052 2008-Apr-26 18:59:28 LOG4 log_alfabeam: ALFABEAM 2 9.874370278456833 23.553149500883141 2008-Apr-26 18:59:28 LOG4 log_alfabeam: ALFABEAM 3 9.873602913604454 23.644964574525183 2008-Apr-26 18:59:28 LOG4 log_alfabeam: ALFABEAM 4 9.866601553323340 23.675186656598807 2008-Apr-26 18:59:28 LOG4 log_alfabeam: ALFABEAM 5 9.860402827721252 23.613879578602265 2008-Apr-26 18:59:28 LOG4 log_alfabeam: ALFABEAM 6 9.861166585956473 23.523137711412719 2008-Apr-26 18:59:28 INFO2 take_spectra: Starting WAPP scan: 811700454 2008-Apr-26 18:59:28 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-26 18:59:28 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-26 18:59:28 LOG5 begin_task: Level: (5) ID = <10125> Status = 0 0 0 0 ok 2008-Apr-26 18:59:28 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-26 18:59:28 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82769.00 2008-Apr-26 18:59:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.115097 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-26 18:59:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.115097 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-26 18:59:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.115097 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-26 18:59:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.115097 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-26 18:59:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.115097 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-26 18:59:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.115097 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:59:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.115097 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:59:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.115097 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:59:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.115097 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:59:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-26 18:59:34 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-26 18:59:34 LOG5 end_task: Level: (5) ID = <10125> Status = 0 0 0 0 ok 2008-Apr-26 18:59:34 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-26 18:59:34 LOG5 end_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2008-Apr-26 18:59:34 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-26 18:59:34 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-26 18:59:34 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-26 18:59:34 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-26 18:59:34 LOG5 begin_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2008-Apr-26 18:59:34 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-26 18:59:34 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-26 18:59:34 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-26 18:59:34 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-26 18:59:34 LOG5 end_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2008-Apr-26 18:59:34 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-26 18:59:34 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-26 18:59:34 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-26 18:59:34 LOG5 begin_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2008-Apr-26 18:59:34 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-26 18:59:34 LOG5 log_alfabeam: Parameters: 9.8673888888888914 23.583888888888886 8.896394 2008.3224951834109 -50.200077 2008-Apr-26 18:59:34 LOG4 log_alfabeam: ALFABEAM 0 9.867388888888888 23.583888888888893 2008-Apr-26 18:59:34 LOG4 log_alfabeam: ALFABEAM 1 9.868137109258910 23.492637446310081 2008-Apr-26 18:59:34 LOG4 log_alfabeam: ALFABEAM 2 9.874371725049517 23.553211128563326 2008-Apr-26 18:59:34 LOG4 log_alfabeam: ALFABEAM 3 9.873600024227022 23.645020176845371 2008-Apr-26 18:59:34 LOG4 log_alfabeam: ALFABEAM 4 9.866597216781505 23.675179657668615 2008-Apr-26 18:59:34 LOG4 log_alfabeam: ALFABEAM 5 9.860401416850573 23.613816851632599 2008-Apr-26 18:59:34 LOG4 log_alfabeam: ALFABEAM 6 9.861169438070078 23.523082627910142 2008-Apr-26 18:59:34 INFO2 take_spectra: Starting WAPP scan: 811700455 2008-Apr-26 18:59:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-26 18:59:35 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-26 18:59:35 LOG5 begin_task: Level: (5) ID = <10128> Status = 0 0 0 0 ok 2008-Apr-26 18:59:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-26 18:59:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.511 > 1.4)! 2008-Apr-26 18:59:35 LOG4 check_wapp_levels: WAPP-1 power levels: 0.924 1.045 0.892 1.050 2008-Apr-26 18:59:35 LOG4 check_wapp_levels: WAPP-2 power levels: 1.450 1.324 1.408 1.472 2008-Apr-26 18:59:35 LOG4 check_wapp_levels: WAPP-3 power levels: 1.339 1.381 1.503 1.275 2008-Apr-26 18:59:35 LOG4 check_wapp_levels: WAPP-4 power levels: 1.511 1.466 1.317 1.310 2008-Apr-26 18:59:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82776.00 2008-Apr-26 18:59:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.115097 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-26 18:59:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.115097 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-26 18:59:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.115097 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-26 18:59:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.115097 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-26 18:59:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.115097 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-26 18:59:41 INFO5 check_wapp_levels: WAPP power levels are between 1.204 and 1.511 (still bad) 2008-Apr-26 18:59:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.115097 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:59:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.115097 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:59:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.115097 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:59:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.115097 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 18:59:41 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-26 18:59:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-26 18:59:41 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-26 18:59:41 LOG5 end_task: Level: (5) ID = <10128> Status = 0 0 0 0 ok 2008-Apr-26 18:59:41 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-26 18:59:41 LOG5 end_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2008-Apr-26 18:59:41 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-26 18:59:41 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-26 18:59:41 LOG5 finish_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2008-Apr-26 18:59:41 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-26 18:59:41 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 18:59:41 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-26 18:59:41 LOG5 end_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2008-Apr-26 18:59:41 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-26 18:59:41 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 246.81 and ZA = 14.71 2008-Apr-26 18:59:41 LOG3 track_source: Calling 'track_source AGES3193_p2_013 246.81 14.7087761022 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-26 18:59:41 START begin_task: Starting task 'sending tracking commands' 2008-Apr-26 18:59:41 LOG5 begin_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2008-Apr-26 18:59:41 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_013} INFO {Slewing to source 'AGES3193_p2_013' ...} 2008-Apr-26 18:59:41 INFO1 track_source: Starting to track AGES3193_p2_013 2008-Apr-26 18:59:41 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_013" 2008-Apr-26 18:59:41 LOG3 vw_send: To DATATAKING: set ra 246.81 2008-Apr-26 18:59:41 LOG3 vw_send: To DATATAKING: set dec 14.7087761022 2008-Apr-26 18:59:41 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-26 18:59:41 LOG3 vw_send: To DATATAKING: pnt tr 246.81 14.7087761022 -CF 2008-Apr-26 18:59:41 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-26 18:59:41 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-26 18:59:41 LOG5 finish_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2008-Apr-26 18:59:41 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-26 18:59:41 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 18:59:42 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-26 18:59:42 LOG5 end_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2008-Apr-26 18:59:42 LOG1 fixed_driftmap: Parameters: HA = -00:58:59.8 Start = 08:54:29.6 LST = 08:53:54.0 diff = 35.6 secs 2008-Apr-26 18:59:42 INFO2 fixed_driftmap: Waiting 33.6 seconds for RA 9:53:29 2008-Apr-26 18:59:42 INFO2 lstwait: Waiting for 33.5 secs from LST 08:53:54 to LST 08:54:28 ... 2008-Apr-26 18:59:42 LOG4 send_obs_status: To obs_status: <1> TASKTIME 33.470328806943499 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-26 18:59:42 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-26 18:59:42 LOG5 begin_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2008-Apr-26 18:59:42 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_013" 2008-Apr-26 18:59:42 LOG4 got_cormsg: From DATATAKING: set ra 246.81 2008-Apr-26 18:59:42 LOG4 got_cormsg: From DATATAKING: set dec 14.7087761022 2008-Apr-26 18:59:42 LOG4 got_cormsg: From DATATAKING: vw% 246.81 2008-Apr-26 18:59:42 LOG4 got_cormsg: From DATATAKING: vw% 14.7087761022 2008-Apr-26 18:59:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:59:42 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-26 18:59:42 LOG4 got_cormsg: From DATATAKING: pnt tr 246.81 14.7087761022 -CF 2008-Apr-26 18:59:42 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-26 18:59:42 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-26 18:59:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 18:59:47 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.893 and 1.096 2008-Apr-26 19:00:15 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-26 19:00:15 LOG5 end_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2008-Apr-26 19:00:15 LOG4 lstwait: Finished waiting, the gui caused difference: 0.53003359999905797 2008-Apr-26 19:00:15 INFO3 lstwait: Finished waiting 2008-Apr-26 19:00:15 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-26 19:00:15 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-26 19:00:15 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-26 19:00:15 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-26 19:00:15 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-26 19:00:15 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-26 19:00:15 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-26 19:00:15 LOG5 begin_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2008-Apr-26 19:00:15 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-26 19:00:15 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-26 19:00:15 INFO2 take_spectra: Starting WAPP scan: 811700456 2008-Apr-26 19:00:16 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-26 19:00:16 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-26 19:00:16 LOG5 begin_task: Level: (4) ID = <10132> Status = 0 0 0 0 ok 2008-Apr-26 19:00:16 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-26 19:00:16 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82817.00 2008-Apr-26 19:00:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.115097 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-26 19:00:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.115097 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-26 19:00:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.115097 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-26 19:00:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.115097 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-26 19:00:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.115097 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-26 19:00:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.115097 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 19:00:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.115097 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 19:00:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.115097 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 19:00:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.115097 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 19:20:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-26 19:20:17 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-26 19:20:17 LOG5 end_task: Level: (4) ID = <10132> Status = 0 0 0 0 ok 2008-Apr-26 19:20:17 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-26 19:20:17 LOG5 end_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2008-Apr-26 19:20:17 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-26 19:20:17 LOG5 finish_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2008-Apr-26 19:20:17 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-26 19:20:17 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-26 19:20:17 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-26 19:20:17 LOG5 end_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2008-Apr-26 19:20:17 COMMAND run_command_line: EXECUTING command 11: 'FIXEDDRIFT az=237.00 alfaangle=-37.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_015 ra=95300.00 dec=233200.00' 2008-Apr-26 19:20:17 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-26 19:20:18 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-26 19:20:18 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 237.00 -37.1 hcorcal 5 tracking no first 1 AGES3193_p2_015 95300.00 233200.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-26 19:20:18 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-26 19:20:18 LOG5 begin_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2008-Apr-26 19:20:18 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES3193_p2_013' 2008-Apr-26 19:20:18 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-26 19:20:18 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p2_015} 2008-Apr-26 19:20:18 INFO3 fixed_driftmap: Sending telescope to Az = 237.00 and ZA = 9.85 2008-Apr-26 19:20:18 LOG3 track_source: Calling 'track_source AGES3193_p2_015 237.00 9.8485271747 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-26 19:20:18 START begin_task: Starting task 'sending tracking commands' 2008-Apr-26 19:20:18 LOG5 begin_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2008-Apr-26 19:20:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_015} INFO {Slewing to source 'AGES3193_p2_015' ...} 2008-Apr-26 19:20:18 INFO1 track_source: Starting to track AGES3193_p2_015 2008-Apr-26 19:20:18 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_015" 2008-Apr-26 19:20:18 LOG3 vw_send: To DATATAKING: set ra 237.00 2008-Apr-26 19:20:18 LOG3 vw_send: To DATATAKING: set dec 9.8485271747 2008-Apr-26 19:20:18 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-26 19:20:18 LOG3 vw_send: To DATATAKING: pnt tr 237.00 9.8485271747 -CF 2008-Apr-26 19:20:18 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-26 19:20:18 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-26 19:20:18 LOG5 finish_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2008-Apr-26 19:20:18 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-26 19:20:18 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 19:20:18 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-26 19:20:18 LOG5 end_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2008-Apr-26 19:20:18 START begin_task: Starting task 'rotate ALFA to -37.1 degrees' 2008-Apr-26 19:20:18 LOG5 begin_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2008-Apr-26 19:20:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -37.1 degrees ...} 2008-Apr-26 19:20:18 INFO2 rotate_alfa: ALFA commanded to -37.1 degrees 2008-Apr-26 19:20:18 LOG3 sock_errsend: To ALFAMOTOR: POSITION -37.1 REPLY 2008-Apr-26 19:20:18 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-26 19:20:18 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-26 19:20:18 LOG5 begin_task: Level: (4) ID = <10136> Status = 0 0 0 0 ok 2008-Apr-26 19:20:18 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_015" 2008-Apr-26 19:20:18 LOG4 got_cormsg: From DATATAKING: set ra 237.00 2008-Apr-26 19:20:18 LOG4 got_cormsg: From DATATAKING: set dec 9.8485271747 2008-Apr-26 19:20:18 LOG4 got_cormsg: From DATATAKING: vw% 237.00 2008-Apr-26 19:20:18 LOG4 got_cormsg: From DATATAKING: vw% 9.8485271747 2008-Apr-26 19:20:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 19:20:18 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-26 19:20:18 LOG4 got_cormsg: From DATATAKING: pnt tr 237.00 9.8485271747 -CF 2008-Apr-26 19:20:18 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-26 19:20:18 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-26 19:20:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 19:20:27 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-26 19:20:27 INFO3 alfa_motor: ALFA rotator in-position -37.10 degrees 2008-Apr-26 19:20:27 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-26 19:20:27 LOG5 end_task: Level: (4) ID = <10136> Status = 0 0 0 0 ok 2008-Apr-26 19:20:27 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-26 19:20:27 STOP finish_task: Finishing task 'rotate ALFA to -37.1 degrees' 2008-Apr-26 19:20:27 LOG5 finish_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2008-Apr-26 19:20:27 INFO2 finish_task: DONE finished configuration: rotating ALFA to -37.1 degrees 2008-Apr-26 19:20:27 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 19:20:27 STOP end_task: Finishing task 'rotate ALFA to -37.1 degrees' with status 'OK' 2008-Apr-26 19:20:27 LOG5 end_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2008-Apr-26 19:20:27 START begin_task: Starting task 'waiting on telescope' 2008-Apr-26 19:20:27 LOG5 begin_task: Level: (3) ID = <10137> Status = 0 0 0 0 ok 2008-Apr-26 19:20:27 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-26 19:20:27 LOG3 waittrk: Start waittrk 5 2008-Apr-26 19:20:27 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-26 19:20:27 LOG5 begin_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2008-Apr-26 19:20:32 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-26 19:20:32 LOG5 end_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2008-Apr-26 19:20:32 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-26 19:20:32 LOG5 begin_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2008-Apr-26 19:22:25 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-26 19:22:25 LOG5 end_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2008-Apr-26 19:22:25 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-26 19:22:25 INFO2 waittrk: Now tracking AGES3193_p2_015 2008-Apr-26 19:22:25 LOG4 waittrk: Current telescope position: Az = 236.52 ZA = 9.86 2008-Apr-26 19:22:25 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-26 19:22:25 LOG5 finish_task: Level: (3) ID = <10137> Status = 0 0 0 0 ok 2008-Apr-26 19:22:25 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-26 19:22:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 19:22:26 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-26 19:22:26 LOG5 end_task: Level: (3) ID = <10137> Status = 0 0 0 0 ok 2008-Apr-26 19:22:26 START begin_task: Starting task 'selecting calibration type' 2008-Apr-26 19:22:26 LOG5 begin_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2008-Apr-26 19:22:26 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-26 19:22:26 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-26 19:22:26 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 19:22:26 START begin_task: Starting task 'waiting on setcal' 2008-Apr-26 19:22:26 LOG5 begin_task: Level: (4) ID = <10141> Status = 0 0 0 0 ok 2008-Apr-26 19:22:26 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-26 19:22:26 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 19:22:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 19:22:26 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-26 19:22:26 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-26 19:22:26 LOG5 end_task: Level: (4) ID = <10141> Status = 0 0 0 0 ok 2008-Apr-26 19:22:26 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-26 19:22:26 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-26 19:22:26 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-26 19:22:26 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-26 19:22:26 LOG5 begin_task: Level: (4) ID = <10142> Status = 0 0 0 0 ok 2008-Apr-26 19:22:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 19:22:27 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-26 19:22:27 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-26 19:22:27 LOG5 end_task: Level: (4) ID = <10142> Status = 0 0 0 0 ok 2008-Apr-26 19:22:27 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-26 19:22:27 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-26 19:22:27 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-26 19:22:27 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-26 19:22:27 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-26 19:22:27 LOG5 begin_task: Level: (4) ID = <10143> Status = 0 0 0 0 ok 2008-Apr-26 19:22:27 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-26 19:22:27 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-26 19:22:27 LOG5 end_task: Level: (4) ID = <10143> Status = 0 0 0 0 ok 2008-Apr-26 19:22:27 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-26 19:22:27 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-26 19:22:27 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-26 19:22:27 LOG5 finish_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2008-Apr-26 19:22:27 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-26 19:22:27 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 19:22:27 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-26 19:22:27 LOG5 end_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2008-Apr-26 19:22:27 LOG5 dopset_later: Calling 'dopset_later 46.708962316662451' 2008-Apr-26 19:22:27 INFO3 dopset_later: Setting Doppler correction for 19:23:13 (46.7 seconds from now) 2008-Apr-26 19:22:27 LOG5 antvel: Calling 'antvel 237.000000 9.848527 F 46.708962316662451' 2008-Apr-26 19:22:27 LOG2 antvel: Parameters to Doppler: Heliocentric 84193 2008 117 0.0 2008-Apr-26 19:22:27 INFO5 antvel: Computed antenna velocity: +27.89973 km/s 2008-Apr-26 19:22:27 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=27.8997260342 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-26 19:22:27 INFO4 dopset_gen: New sky frequencies: 1381.114897 1381.114897 1381.114897 1381.114897 1381.114897 1381.114897 1381.114897 1381.114897 1381.114897 2008-Apr-26 19:22:27 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.114897 sky0=1381.114897 sky1=1381.114897 sky2=1381.114897 sky3=1381.114897 sky4=1381.114897 sky5=1381.114897 sky6=1381.114897 sky7=1381.114897 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-26 19:22:27 LOG2 dopset_gen: Result from 'sky2syn': 1631.114897 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-26 19:22:27 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631114897.0} 2008-Apr-26 19:22:27 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 19:22:27 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-26 19:22:27 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-26 19:22:27 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:17.4 Dec = +23:32:02.1 2008-Apr-26 19:22:27 LOG3 track_source: Calling 'track_source AGES3193_p2_015 095217.4 233202.1 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-26 19:22:27 START begin_task: Starting task 'sending tracking commands' 2008-Apr-26 19:22:27 LOG5 begin_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2008-Apr-26 19:22:27 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_015} INFO {Slewing to source 'AGES3193_p2_015' ...} 2008-Apr-26 19:22:27 INFO1 track_source: Starting to track AGES3193_p2_015 2008-Apr-26 19:22:27 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_015" 2008-Apr-26 19:22:27 LOG3 vw_send: To DATATAKING: set ra 095217.4 2008-Apr-26 19:22:27 LOG3 vw_send: To DATATAKING: set dec 233202.1 2008-Apr-26 19:22:27 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-26 19:22:27 LOG3 vw_send: To DATATAKING: pnt tr 095217.4 233202.1 -CJ 2008-Apr-26 19:22:27 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-26 19:22:27 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-26 19:22:27 LOG5 finish_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2008-Apr-26 19:22:27 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-26 19:22:27 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 19:22:27 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-26 19:22:27 LOG5 end_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2008-Apr-26 19:22:27 START begin_task: Starting task 'waiting on telescope' 2008-Apr-26 19:22:27 LOG5 begin_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2008-Apr-26 19:22:27 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-26 19:22:27 LOG3 waittrk: Start waittrk 5 2008-Apr-26 19:22:27 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-26 19:22:27 LOG5 begin_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2008-Apr-26 19:22:27 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631114897.0} 2008-Apr-26 19:22:27 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 19:22:27 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_015" 2008-Apr-26 19:22:27 LOG4 got_cormsg: From DATATAKING: set ra 095217.4 2008-Apr-26 19:22:27 LOG4 got_cormsg: From DATATAKING: set dec 233202.1 2008-Apr-26 19:22:27 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 095217.4 2008-Apr-26 19:22:27 LOG4 got_cormsg: From DATATAKING: vw% 233202.1 2008-Apr-26 19:22:27 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 19:22:27 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-26 19:22:27 LOG4 got_cormsg: From DATATAKING: pnt tr 095217.4 233202.1 -CJ 2008-Apr-26 19:22:27 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-26 19:22:27 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-26 19:22:27 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 19:22:32 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-26 19:22:32 LOG5 end_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2008-Apr-26 19:22:32 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-26 19:22:32 LOG5 begin_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2008-Apr-26 19:22:34 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-26 19:22:34 LOG5 end_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2008-Apr-26 19:22:34 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-26 19:22:34 INFO2 waittrk: Now tracking AGES3193_p2_015 2008-Apr-26 19:22:34 LOG4 waittrk: Current telescope position: Az = 236.47 ZA = 9.84 2008-Apr-26 19:22:34 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-26 19:22:34 LOG5 finish_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2008-Apr-26 19:22:34 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-26 19:22:34 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 19:22:34 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-26 19:22:34 LOG5 end_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2008-Apr-26 19:22:34 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-26 19:22:34 LOG5 begin_task: Level: (3) ID = <10148> Status = 0 0 0 0 ok 2008-Apr-26 19:22:35 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-26 19:22:35 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-26 19:22:35 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-26 19:22:35 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-26 19:22:35 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 19:22:35 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-26 19:22:35 LOG5 begin_task: Level: (4) ID = <10149> Status = 0 0 0 0 ok 2008-Apr-26 19:22:35 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-26 19:22:35 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 19:22:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 19:22:38 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-26 19:22:38 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-26 19:22:38 LOG5 end_task: Level: (4) ID = <10149> Status = 0 0 0 0 ok 2008-Apr-26 19:22:38 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-26 19:22:38 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-26 19:22:38 LOG5 begin_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2008-Apr-26 19:22:38 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-26 19:22:38 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-26 19:22:38 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-26 19:22:38 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-26 19:22:38 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-26 19:22:38 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-26 19:22:38 LOG5 begin_task: Level: (5) ID = <10151> Status = 0 0 0 0 ok 2008-Apr-26 19:22:38 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-26 19:22:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 19:22:38 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 1 dB --- beam 1: 7 6 dB 2008-Apr-26 19:22:38 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 6 dB 2008-Apr-26 19:22:38 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-26 19:22:38 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 3 3 dB 2008-Apr-26 19:22:38 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-26 19:22:38 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-26 19:22:38 LOG5 end_task: Level: (5) ID = <10151> Status = 0 0 0 0 ok 2008-Apr-26 19:22:38 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.904 1.008 ALFA beam 1: 1.099 1.019 2008-Apr-26 19:22:38 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.014 0.906 ALFA beam 3: 0.974 1.021 2008-Apr-26 19:22:38 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.903 0.939 ALFA beam 5: 1.038 0.906 2008-Apr-26 19:22:38 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.044 1.025 ALFA beam 7: 0.910 0.916 2008-Apr-26 19:22:38 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-26 19:22:38 LOG5 finish_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2008-Apr-26 19:22:38 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-26 19:22:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 19:22:38 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-26 19:22:38 LOG5 end_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2008-Apr-26 19:22:38 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-26 19:22:38 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-26 19:22:38 LOG5 finish_task: Level: (3) ID = <10148> Status = 0 0 0 0 ok 2008-Apr-26 19:22:38 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-26 19:22:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 19:22:38 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-26 19:22:38 LOG5 end_task: Level: (3) ID = <10148> Status = 0 0 0 0 ok 2008-Apr-26 19:22:38 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 SS 2008-Apr-26 19:22:38 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 SS 2008-Apr-26 19:22:38 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 SS 2008-Apr-26 19:22:38 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 SS 2008-Apr-26 19:22:39 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-26 19:22:39 START begin_task: Starting task 'WAPP calibration' 2008-Apr-26 19:22:39 LOG5 begin_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2008-Apr-26 19:22:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-26 19:22:39 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-26 19:22:39 START begin_task: Starting task 'selecting calibration type' 2008-Apr-26 19:22:39 LOG5 begin_task: Level: (4) ID = <10153> Status = 0 0 0 0 ok 2008-Apr-26 19:22:39 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-26 19:22:39 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-26 19:22:39 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 19:22:39 START begin_task: Starting task 'waiting on setcal' 2008-Apr-26 19:22:39 LOG5 begin_task: Level: (5) ID = <10154> Status = 0 0 0 0 ok 2008-Apr-26 19:22:39 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 SS' 2008-Apr-26 19:22:39 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-26 19:22:39 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 19:22:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 19:22:39 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-26 19:22:39 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-26 19:22:39 LOG5 end_task: Level: (5) ID = <10154> Status = 0 0 0 0 ok 2008-Apr-26 19:22:39 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-26 19:22:39 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-26 19:22:39 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-26 19:22:39 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-26 19:22:39 LOG5 begin_task: Level: (5) ID = <10155> Status = 0 0 0 0 ok 2008-Apr-26 19:22:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 19:22:39 NOTE WAPPDATA-new_file: New FITS file: wapp.20080426.a2048.0002.fits 2008-Apr-26 19:22:39 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080426.a2048.0002.fits} 2008-Apr-26 19:22:39 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-26 19:22:39 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-26 19:22:39 LOG5 end_task: Level: (5) ID = <10155> Status = 0 0 0 0 ok 2008-Apr-26 19:22:39 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-26 19:22:39 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-26 19:22:39 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-26 19:22:39 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-26 19:22:39 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-26 19:22:39 LOG5 begin_task: Level: (5) ID = <10156> Status = 0 0 0 0 ok 2008-Apr-26 19:22:39 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-26 19:22:39 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-26 19:22:39 LOG5 end_task: Level: (5) ID = <10156> Status = 0 0 0 0 ok 2008-Apr-26 19:22:39 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-26 19:22:39 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-26 19:22:39 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-26 19:22:39 LOG5 finish_task: Level: (4) ID = <10153> Status = 0 0 0 0 ok 2008-Apr-26 19:22:39 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-26 19:22:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 19:22:39 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-26 19:22:39 LOG5 end_task: Level: (4) ID = <10153> Status = 0 0 0 0 ok 2008-Apr-26 19:22:39 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-26 19:22:39 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-26 19:22:39 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-26 19:22:39 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-26 19:22:39 LOG5 begin_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2008-Apr-26 19:22:40 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-26 19:22:40 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-26 19:22:40 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-26 19:22:40 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-26 19:22:40 LOG5 end_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2008-Apr-26 19:22:40 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-26 19:22:40 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-26 19:22:40 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-26 19:22:40 LOG5 begin_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2008-Apr-26 19:22:40 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-26 19:22:40 LOG5 log_alfabeam: Parameters: 9.8714999999999993 23.53391666666667 9.282169 2008.3225390714124 -37.100002 2008-Apr-26 19:22:40 LOG4 log_alfabeam: ALFABEAM 0 9.871499999999994 23.533916666666677 2008-Apr-26 19:22:40 LOG4 log_alfabeam: ALFABEAM 1 9.871903694741079 23.440363740802688 2008-Apr-26 19:22:40 LOG4 log_alfabeam: ALFABEAM 2 9.878198241471075 23.502263511841122 2008-Apr-26 19:22:40 LOG4 log_alfabeam: ALFABEAM 3 9.877758655655905 23.596594578466132 2008-Apr-26 19:22:40 LOG4 log_alfabeam: ALFABEAM 4 9.871025023319122 23.627723553318194 2008-Apr-26 19:22:40 LOG4 log_alfabeam: ALFABEAM 5 9.864799142553199 23.564417552473163 2008-Apr-26 19:22:40 LOG4 log_alfabeam: ALFABEAM 6 9.865237737104859 23.471385093435490 2008-Apr-26 19:22:40 INFO2 take_spectra: Starting WAPP scan: 811700457 2008-Apr-26 19:22:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-26 19:22:40 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-26 19:22:40 LOG5 begin_task: Level: (5) ID = <10159> Status = 0 0 0 0 ok 2008-Apr-26 19:22:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-26 19:22:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84161.00 2008-Apr-26 19:22:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.114897 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-26 19:22:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.114897 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-26 19:22:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.114897 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-26 19:22:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.114897 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-26 19:22:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.114897 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-26 19:22:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.114897 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 19:22:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.114897 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 19:22:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.114897 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 19:22:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.114897 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 19:22:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-26 19:22:46 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-26 19:22:46 LOG5 end_task: Level: (5) ID = <10159> Status = 0 0 0 0 ok 2008-Apr-26 19:22:46 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-26 19:22:46 LOG5 end_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2008-Apr-26 19:22:46 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-26 19:22:46 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-26 19:22:46 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-26 19:22:46 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-26 19:22:46 LOG5 begin_task: Level: (4) ID = <10160> Status = 0 0 0 0 ok 2008-Apr-26 19:22:46 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-26 19:22:46 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-26 19:22:46 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-26 19:22:46 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-26 19:22:46 LOG5 end_task: Level: (4) ID = <10160> Status = 0 0 0 0 ok 2008-Apr-26 19:22:46 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-26 19:22:46 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-26 19:22:46 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-26 19:22:46 LOG5 begin_task: Level: (4) ID = <10161> Status = 0 0 0 0 ok 2008-Apr-26 19:22:46 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-26 19:22:46 LOG5 log_alfabeam: Parameters: 9.8714999999999993 23.53391666666667 9.284119 2008.3225392932291 -37.100002 2008-Apr-26 19:22:46 LOG4 log_alfabeam: ALFABEAM 0 9.871499999999997 23.533916666666677 2008-Apr-26 19:22:46 LOG4 log_alfabeam: ALFABEAM 1 9.871914187436406 23.440372807086675 2008-Apr-26 19:22:46 LOG4 log_alfabeam: ALFABEAM 2 9.878201817932139 23.502405578067876 2008-Apr-26 19:22:46 LOG4 log_alfabeam: ALFABEAM 3 9.877751543997825 23.596728686071682 2008-Apr-26 19:22:46 LOG4 log_alfabeam: ALFABEAM 4 9.871014315804979 23.627713572840829 2008-Apr-26 19:22:46 LOG4 log_alfabeam: ALFABEAM 5 9.864795703756725 23.564272798690137 2008-Apr-26 19:22:46 LOG4 log_alfabeam: ALFABEAM 6 9.865244808609226 23.471251398592294 2008-Apr-26 19:22:46 INFO2 take_spectra: Starting WAPP scan: 811700458 2008-Apr-26 19:22:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-26 19:22:47 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-26 19:22:47 LOG5 begin_task: Level: (5) ID = <10162> Status = 0 0 0 0 ok 2008-Apr-26 19:22:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-26 19:22:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84168.00 2008-Apr-26 19:22:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.497 > 1.4)! 2008-Apr-26 19:22:52 LOG4 check_wapp_levels: WAPP-1 power levels: 1.244 1.306 1.497 1.398 2008-Apr-26 19:22:52 LOG4 check_wapp_levels: WAPP-2 power levels: 1.386 1.265 1.351 1.409 2008-Apr-26 19:22:52 LOG4 check_wapp_levels: WAPP-3 power levels: 1.270 1.315 1.438 1.219 2008-Apr-26 19:22:52 LOG4 check_wapp_levels: WAPP-4 power levels: 1.449 1.429 1.264 1.277 2008-Apr-26 19:22:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.114897 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-26 19:22:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.114897 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-26 19:22:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.114897 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-26 19:22:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.114897 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-26 19:22:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.114897 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-26 19:22:53 LOG3 WAPP=2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.114897 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 19:22:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.114897 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 19:22:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.114897 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 19:22:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.114897 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 19:22:53 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-26 19:22:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-26 19:22:53 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-26 19:22:53 LOG5 end_task: Level: (5) ID = <10162> Status = 0 0 0 0 ok 2008-Apr-26 19:22:53 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-26 19:22:53 LOG5 end_task: Level: (4) ID = <10161> Status = 0 0 0 0 ok 2008-Apr-26 19:22:53 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-26 19:22:53 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-26 19:22:53 LOG5 finish_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2008-Apr-26 19:22:53 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-26 19:22:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 19:22:53 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-26 19:22:53 LOG5 end_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2008-Apr-26 19:22:53 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-26 19:22:53 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 237.00 and ZA = 9.85 2008-Apr-26 19:22:53 LOG3 track_source: Calling 'track_source AGES3193_p2_015 237.00 9.8485271747 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-26 19:22:53 START begin_task: Starting task 'sending tracking commands' 2008-Apr-26 19:22:53 LOG5 begin_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2008-Apr-26 19:22:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_015} INFO {Slewing to source 'AGES3193_p2_015' ...} 2008-Apr-26 19:22:53 INFO1 track_source: Starting to track AGES3193_p2_015 2008-Apr-26 19:22:53 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_015" 2008-Apr-26 19:22:53 LOG3 vw_send: To DATATAKING: set ra 237.00 2008-Apr-26 19:22:53 LOG3 vw_send: To DATATAKING: set dec 9.8485271747 2008-Apr-26 19:22:53 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-26 19:22:53 LOG3 vw_send: To DATATAKING: pnt tr 237.00 9.8485271747 -CF 2008-Apr-26 19:22:53 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-26 19:22:53 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-26 19:22:53 LOG5 finish_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2008-Apr-26 19:22:53 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-26 19:22:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 19:22:54 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-26 19:22:54 LOG5 end_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2008-Apr-26 19:22:54 LOG1 fixed_driftmap: Parameters: HA = -00:35:59.8 Start = 09:17:29.6 LST = 09:17:09.8 diff = 19.8 secs 2008-Apr-26 19:22:54 INFO2 fixed_driftmap: Waiting 17.8 seconds for RA 9:53:29 2008-Apr-26 19:22:54 INFO2 lstwait: Waiting for 17.7 secs from LST 09:17:10 to LST 09:17:28 ... 2008-Apr-26 19:22:54 LOG4 send_obs_status: To obs_status: <1> TASKTIME 17.712750334906527 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-26 19:22:54 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-26 19:22:54 LOG5 begin_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2008-Apr-26 19:22:54 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_015" 2008-Apr-26 19:22:54 LOG3 WAPP=1-save_rfcalc: Channel 5: Sky freq = 1381.114897 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 19:22:54 LOG4 got_cormsg: From DATATAKING: set ra 237.00 2008-Apr-26 19:22:54 LOG4 got_cormsg: From DATATAKING: set dec 9.8485271747 2008-Apr-26 19:22:54 LOG4 got_cormsg: From DATATAKING: vw% 237.00 2008-Apr-26 19:22:54 LOG4 got_cormsg: From DATATAKING: vw% 9.8485271747 2008-Apr-26 19:22:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 19:22:54 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-26 19:22:54 LOG4 got_cormsg: From DATATAKING: pnt tr 237.00 9.8485271747 -CF 2008-Apr-26 19:22:54 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-26 19:22:54 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-26 19:22:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 19:22:58 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.902 and 1.102 2008-Apr-26 19:23:11 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-26 19:23:11 LOG5 end_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2008-Apr-26 19:23:11 LOG4 lstwait: Finished waiting, the gui caused difference: 0.28915436000147565 2008-Apr-26 19:23:11 INFO3 lstwait: Finished waiting 2008-Apr-26 19:23:11 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-26 19:23:11 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-26 19:23:11 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-26 19:23:11 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-26 19:23:11 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-26 19:23:11 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-26 19:23:11 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-26 19:23:11 LOG5 begin_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2008-Apr-26 19:23:11 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-26 19:23:12 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-26 19:23:12 INFO2 take_spectra: Starting WAPP scan: 811700459 2008-Apr-26 19:23:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-26 19:23:12 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-26 19:23:12 LOG5 begin_task: Level: (4) ID = <10166> Status = 0 0 0 0 ok 2008-Apr-26 19:23:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-26 19:23:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84193.00 2008-Apr-26 19:23:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.114897 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-26 19:23:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.114897 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-26 19:23:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.114897 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-26 19:23:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.114897 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-26 19:23:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.114897 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-26 19:23:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.114897 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 19:23:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.114897 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 19:23:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.114897 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 19:23:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.114897 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 19:43:13 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-26 19:43:13 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-26 19:43:13 LOG5 end_task: Level: (4) ID = <10166> Status = 0 0 0 0 ok 2008-Apr-26 19:43:13 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-26 19:43:13 LOG5 end_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2008-Apr-26 19:43:13 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-26 19:43:13 LOG5 finish_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2008-Apr-26 19:43:13 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-26 19:43:13 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-26 19:43:13 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-26 19:43:13 LOG5 end_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2008-Apr-26 19:43:13 COMMAND run_command_line: EXECUTING command 15: 'FIXEDDRIFT az=210.25 alfaangle=-8.5 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_017 ra=95300.00 dec=232900.00' 2008-Apr-26 19:43:13 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-26 19:43:14 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-26 19:43:14 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 210.25 -8.5 hcorcal 5 tracking no first 1 AGES3193_p2_017 95300.00 232900.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-26 19:43:14 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-26 19:43:14 LOG5 begin_task: Level: (2) ID = <10167> Status = 0 0 0 0 ok 2008-Apr-26 19:43:14 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES3193_p2_015' 2008-Apr-26 19:43:14 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-26 19:43:14 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p2_017} 2008-Apr-26 19:43:14 INFO3 fixed_driftmap: Sending telescope to Az = 210.25 and ZA = 5.93 2008-Apr-26 19:43:14 LOG3 track_source: Calling 'track_source AGES3193_p2_017 210.25 5.9268292182 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-26 19:43:14 START begin_task: Starting task 'sending tracking commands' 2008-Apr-26 19:43:14 LOG5 begin_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2008-Apr-26 19:43:14 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_017} INFO {Slewing to source 'AGES3193_p2_017' ...} 2008-Apr-26 19:43:14 INFO1 track_source: Starting to track AGES3193_p2_017 2008-Apr-26 19:43:14 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_017" 2008-Apr-26 19:43:14 LOG3 vw_send: To DATATAKING: set ra 210.25 2008-Apr-26 19:43:14 LOG3 vw_send: To DATATAKING: set dec 5.9268292182 2008-Apr-26 19:43:14 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-26 19:43:14 LOG3 vw_send: To DATATAKING: pnt tr 210.25 5.9268292182 -CF 2008-Apr-26 19:43:14 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-26 19:43:14 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-26 19:43:14 LOG5 finish_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2008-Apr-26 19:43:14 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-26 19:43:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 19:43:14 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-26 19:43:14 LOG5 end_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2008-Apr-26 19:43:14 START begin_task: Starting task 'rotate ALFA to -8.5 degrees' 2008-Apr-26 19:43:14 LOG5 begin_task: Level: (3) ID = <10169> Status = 0 0 0 0 ok 2008-Apr-26 19:43:14 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -8.5 degrees ...} 2008-Apr-26 19:43:14 INFO2 rotate_alfa: ALFA commanded to -8.5 degrees 2008-Apr-26 19:43:14 LOG3 sock_errsend: To ALFAMOTOR: POSITION -8.5 REPLY 2008-Apr-26 19:43:14 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-26 19:43:14 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-26 19:43:14 LOG5 begin_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2008-Apr-26 19:43:14 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_017" 2008-Apr-26 19:43:14 LOG4 got_cormsg: From DATATAKING: set ra 210.25 2008-Apr-26 19:43:14 LOG4 got_cormsg: From DATATAKING: set dec 5.9268292182 2008-Apr-26 19:43:14 LOG4 got_cormsg: From DATATAKING: vw% 210.25 2008-Apr-26 19:43:14 LOG4 got_cormsg: From DATATAKING: vw% 5.9268292182 2008-Apr-26 19:43:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 19:43:14 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-26 19:43:14 LOG4 got_cormsg: From DATATAKING: pnt tr 210.25 5.9268292182 -CF 2008-Apr-26 19:43:14 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-26 19:43:14 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-26 19:43:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 19:43:31 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-26 19:43:31 INFO3 alfa_motor: ALFA rotator in-position -8.50 degrees 2008-Apr-26 19:43:31 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-26 19:43:31 LOG5 end_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2008-Apr-26 19:43:31 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-26 19:43:31 STOP finish_task: Finishing task 'rotate ALFA to -8.5 degrees' 2008-Apr-26 19:43:31 LOG5 finish_task: Level: (3) ID = <10169> Status = 0 0 0 0 ok 2008-Apr-26 19:43:31 INFO2 finish_task: DONE finished configuration: rotating ALFA to -8.5 degrees 2008-Apr-26 19:43:31 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 19:43:31 STOP end_task: Finishing task 'rotate ALFA to -8.5 degrees' with status 'OK' 2008-Apr-26 19:43:31 LOG5 end_task: Level: (3) ID = <10169> Status = 0 0 0 0 ok 2008-Apr-26 19:43:31 START begin_task: Starting task 'waiting on telescope' 2008-Apr-26 19:43:31 LOG5 begin_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2008-Apr-26 19:43:31 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-26 19:43:31 LOG3 waittrk: Start waittrk 5 2008-Apr-26 19:43:31 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-26 19:43:31 LOG5 begin_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2008-Apr-26 19:43:36 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-26 19:43:36 LOG5 end_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2008-Apr-26 19:43:36 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-26 19:43:36 LOG5 begin_task: Level: (4) ID = <10173> Status = 0 0 0 0 ok 2008-Apr-26 19:44:58 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-26 19:44:58 LOG5 end_task: Level: (4) ID = <10173> Status = 0 0 0 0 ok 2008-Apr-26 19:44:58 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-26 19:44:58 INFO2 waittrk: Now tracking AGES3193_p2_017 2008-Apr-26 19:44:58 LOG4 waittrk: Current telescope position: Az = 209.85 ZA = 5.95 2008-Apr-26 19:44:58 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-26 19:44:58 LOG5 finish_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2008-Apr-26 19:44:58 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-26 19:44:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 19:44:58 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-26 19:44:58 LOG5 end_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2008-Apr-26 19:44:58 START begin_task: Starting task 'selecting calibration type' 2008-Apr-26 19:44:58 LOG5 begin_task: Level: (3) ID = <10174> Status = 0 0 0 0 ok 2008-Apr-26 19:44:58 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-26 19:44:58 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-26 19:44:58 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 19:44:58 START begin_task: Starting task 'waiting on setcal' 2008-Apr-26 19:44:58 LOG5 begin_task: Level: (4) ID = <10175> Status = 0 0 0 0 ok 2008-Apr-26 19:44:58 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-26 19:44:58 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 19:44:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 19:44:59 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-26 19:44:59 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-26 19:44:59 LOG5 end_task: Level: (4) ID = <10175> Status = 0 0 0 0 ok 2008-Apr-26 19:44:59 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-26 19:44:59 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-26 19:44:59 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-26 19:44:59 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-26 19:44:59 LOG5 begin_task: Level: (4) ID = <10176> Status = 0 0 0 0 ok 2008-Apr-26 19:44:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 19:44:59 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-26 19:44:59 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-26 19:44:59 LOG5 end_task: Level: (4) ID = <10176> Status = 0 0 0 0 ok 2008-Apr-26 19:44:59 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-26 19:44:59 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-26 19:44:59 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-26 19:44:59 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-26 19:44:59 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-26 19:44:59 LOG5 begin_task: Level: (4) ID = <10177> Status = 0 0 0 0 ok 2008-Apr-26 19:44:59 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-26 19:44:59 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-26 19:44:59 LOG5 end_task: Level: (4) ID = <10177> Status = 0 0 0 0 ok 2008-Apr-26 19:44:59 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-26 19:44:59 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-26 19:44:59 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-26 19:44:59 LOG5 finish_task: Level: (3) ID = <10174> Status = 0 0 0 0 ok 2008-Apr-26 19:44:59 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-26 19:44:59 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 19:44:59 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-26 19:44:59 LOG5 end_task: Level: (3) ID = <10174> Status = 0 0 0 0 ok 2008-Apr-26 19:44:59 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2008-Apr-26 19:44:59 INFO2 astwait: Waiting for 10 seconds from 23:44:59 to 23:45:09 UTC ... 2008-Apr-26 19:44:59 LOG4 send_obs_status: To obs_status: <1> TASKTIME 10 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-26 19:44:59 START begin_task: Starting task 'waiting on waiting for AST time' 2008-Apr-26 19:44:59 LOG5 begin_task: Level: (3) ID = <10178> Status = 0 0 0 0 ok 2008-Apr-26 19:45:09 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2008-Apr-26 19:45:09 LOG5 end_task: Level: (3) ID = <10178> Status = 0 0 0 0 ok 2008-Apr-26 19:45:09 INFO3 astwait: Finished waiting 2008-Apr-26 19:45:09 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-26 19:45:09 LOG5 dopset_later: Calling 'dopset_later 60.592556843421882' 2008-Apr-26 19:45:09 INFO3 dopset_later: Setting Doppler correction for 19:46:09 (60.6 seconds from now) 2008-Apr-26 19:45:09 LOG5 antvel: Calling 'antvel 210.250000 5.926829 F 60.592556843421882' 2008-Apr-26 19:45:09 LOG2 antvel: Parameters to Doppler: Heliocentric 85569 2008 117 0.0 2008-Apr-26 19:45:09 INFO5 antvel: Computed antenna velocity: +27.94384 km/s 2008-Apr-26 19:45:09 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=27.943836694200002 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-26 19:45:09 INFO4 dopset_gen: New sky frequencies: 1381.114694 1381.114694 1381.114694 1381.114694 1381.114694 1381.114694 1381.114694 1381.114694 1381.114694 2008-Apr-26 19:45:09 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.114694 sky0=1381.114694 sky1=1381.114694 sky2=1381.114694 sky3=1381.114694 sky4=1381.114694 sky5=1381.114694 sky6=1381.114694 sky7=1381.114694 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-26 19:45:09 LOG2 dopset_gen: Result from 'sky2syn': 1631.114694 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-26 19:45:09 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631114694.0} 2008-Apr-26 19:45:09 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 19:45:09 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-26 19:45:09 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-26 19:45:09 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:03.5 Dec = +23:29:02.0 2008-Apr-26 19:45:09 LOG3 track_source: Calling 'track_source AGES3193_p2_017 095203.5 232902.0 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-26 19:45:09 START begin_task: Starting task 'sending tracking commands' 2008-Apr-26 19:45:09 LOG5 begin_task: Level: (3) ID = <10179> Status = 0 0 0 0 ok 2008-Apr-26 19:45:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_017} INFO {Slewing to source 'AGES3193_p2_017' ...} 2008-Apr-26 19:45:09 INFO1 track_source: Starting to track AGES3193_p2_017 2008-Apr-26 19:45:09 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_017" 2008-Apr-26 19:45:09 LOG3 vw_send: To DATATAKING: set ra 095203.5 2008-Apr-26 19:45:09 LOG3 vw_send: To DATATAKING: set dec 232902.0 2008-Apr-26 19:45:09 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-26 19:45:09 LOG3 vw_send: To DATATAKING: pnt tr 095203.5 232902.0 -CJ 2008-Apr-26 19:45:09 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-26 19:45:09 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-26 19:45:09 LOG5 finish_task: Level: (3) ID = <10179> Status = 0 0 0 0 ok 2008-Apr-26 19:45:09 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-26 19:45:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 19:45:09 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-26 19:45:09 LOG5 end_task: Level: (3) ID = <10179> Status = 0 0 0 0 ok 2008-Apr-26 19:45:09 START begin_task: Starting task 'waiting on telescope' 2008-Apr-26 19:45:09 LOG5 begin_task: Level: (3) ID = <10180> Status = 0 0 0 0 ok 2008-Apr-26 19:45:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-26 19:45:09 LOG3 waittrk: Start waittrk 5 2008-Apr-26 19:45:09 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-26 19:45:09 LOG5 begin_task: Level: (4) ID = <10181> Status = 0 0 0 0 ok 2008-Apr-26 19:45:09 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631114694.0} 2008-Apr-26 19:45:09 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 19:45:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 19:45:09 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_017" 2008-Apr-26 19:45:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 19:45:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 19:45:09 LOG4 got_cormsg: From DATATAKING: set ra 095203.5 2008-Apr-26 19:45:09 LOG4 got_cormsg: From DATATAKING: set dec 232902.0 2008-Apr-26 19:45:09 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-26 19:45:09 LOG4 got_cormsg: From DATATAKING: pnt tr 095203.5 232902.0 -CJ 2008-Apr-26 19:45:09 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-26 19:45:09 LOG4 got_cormsg: From DATATAKING: 095203.5 2008-Apr-26 19:45:09 LOG4 got_cormsg: From DATATAKING: vw% 232902.0 2008-Apr-26 19:45:09 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2008-Apr-26 19:45:14 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-26 19:45:14 LOG5 end_task: Level: (4) ID = <10181> Status = 0 0 0 0 ok 2008-Apr-26 19:45:14 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-26 19:45:14 LOG5 begin_task: Level: (4) ID = <10182> Status = 0 0 0 0 ok 2008-Apr-26 19:45:16 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-26 19:45:16 LOG5 end_task: Level: (4) ID = <10182> Status = 0 0 0 0 ok 2008-Apr-26 19:45:16 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-26 19:45:16 INFO2 waittrk: Now tracking AGES3193_p2_017 2008-Apr-26 19:45:16 LOG4 waittrk: Current telescope position: Az = 209.71 ZA = 5.94 2008-Apr-26 19:45:16 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-26 19:45:16 LOG5 finish_task: Level: (3) ID = <10180> Status = 0 0 0 0 ok 2008-Apr-26 19:45:16 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-26 19:45:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 19:45:16 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-26 19:45:16 LOG5 end_task: Level: (3) ID = <10180> Status = 0 0 0 0 ok 2008-Apr-26 19:45:16 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-26 19:45:16 LOG5 begin_task: Level: (3) ID = <10183> Status = 0 0 0 0 ok 2008-Apr-26 19:45:16 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-26 19:45:16 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-26 19:45:16 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-26 19:45:16 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-26 19:45:16 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 19:45:16 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-26 19:45:16 LOG5 begin_task: Level: (4) ID = <10184> Status = 0 0 0 0 ok 2008-Apr-26 19:45:16 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-26 19:45:16 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 19:45:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 19:45:19 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-26 19:45:19 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-26 19:45:19 LOG5 end_task: Level: (4) ID = <10184> Status = 0 0 0 0 ok 2008-Apr-26 19:45:19 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-26 19:45:19 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-26 19:45:19 LOG5 begin_task: Level: (4) ID = <10185> Status = 0 0 0 0 ok 2008-Apr-26 19:45:19 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-26 19:45:19 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-26 19:45:19 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-26 19:45:19 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-26 19:45:19 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-26 19:45:19 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-26 19:45:19 LOG5 begin_task: Level: (5) ID = <10186> Status = 0 0 0 0 ok 2008-Apr-26 19:45:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 19:45:19 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-26 19:45:20 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 1 dB --- beam 1: 7 6 dB 2008-Apr-26 19:45:20 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 5 dB 2008-Apr-26 19:45:20 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-26 19:45:20 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 2 2 dB 2008-Apr-26 19:45:20 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-26 19:45:20 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-26 19:45:20 LOG5 end_task: Level: (5) ID = <10186> Status = 0 0 0 0 ok 2008-Apr-26 19:45:20 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.084 1.012 ALFA beam 1: 1.082 1.018 2008-Apr-26 19:45:20 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.987 0.906 ALFA beam 3: 0.959 1.025 2008-Apr-26 19:45:20 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.908 0.942 ALFA beam 5: 1.004 1.132 2008-Apr-26 19:45:20 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.978 0.997 ALFA beam 7: 1.066 1.108 2008-Apr-26 19:45:20 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-26 19:45:20 LOG5 finish_task: Level: (4) ID = <10185> Status = 0 0 0 0 ok 2008-Apr-26 19:45:20 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-26 19:45:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 19:45:20 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-26 19:45:20 LOG5 end_task: Level: (4) ID = <10185> Status = 0 0 0 0 ok 2008-Apr-26 19:45:20 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-26 19:45:20 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-26 19:45:20 LOG5 finish_task: Level: (3) ID = <10183> Status = 0 0 0 0 ok 2008-Apr-26 19:45:20 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-26 19:45:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 19:45:20 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-26 19:45:20 LOG5 end_task: Level: (3) ID = <10183> Status = 0 0 0 0 ok 2008-Apr-26 19:45:20 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 SS 2008-Apr-26 19:45:20 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 SS 2008-Apr-26 19:45:20 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 SS 2008-Apr-26 19:45:20 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 SS 2008-Apr-26 19:45:20 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-26 19:45:20 START begin_task: Starting task 'WAPP calibration' 2008-Apr-26 19:45:20 LOG5 begin_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2008-Apr-26 19:45:20 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-26 19:45:20 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-26 19:45:20 START begin_task: Starting task 'selecting calibration type' 2008-Apr-26 19:45:20 LOG5 begin_task: Level: (4) ID = <10188> Status = 0 0 0 0 ok 2008-Apr-26 19:45:20 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-26 19:45:20 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-26 19:45:20 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 19:45:20 START begin_task: Starting task 'waiting on setcal' 2008-Apr-26 19:45:20 LOG5 begin_task: Level: (5) ID = <10189> Status = 0 0 0 0 ok 2008-Apr-26 19:45:20 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 SS' 2008-Apr-26 19:45:20 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-26 19:45:20 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 19:45:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 19:45:21 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-26 19:45:21 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-26 19:45:21 LOG5 end_task: Level: (5) ID = <10189> Status = 0 0 0 0 ok 2008-Apr-26 19:45:21 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-26 19:45:21 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-26 19:45:21 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-26 19:45:21 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-26 19:45:21 LOG5 begin_task: Level: (5) ID = <10190> Status = 0 0 0 0 ok 2008-Apr-26 19:45:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 19:45:21 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-26 19:45:21 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-26 19:45:21 LOG5 end_task: Level: (5) ID = <10190> Status = 0 0 0 0 ok 2008-Apr-26 19:45:21 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-26 19:45:21 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-26 19:45:21 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-26 19:45:21 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-26 19:45:21 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-26 19:45:21 LOG5 begin_task: Level: (5) ID = <10191> Status = 0 0 0 0 ok 2008-Apr-26 19:45:21 NOTE WAPPDATA-new_file: New FITS file: wapp.20080426.a2048.0003.fits 2008-Apr-26 19:45:21 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-26 19:45:21 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-26 19:45:21 LOG5 end_task: Level: (5) ID = <10191> Status = 0 0 0 0 ok 2008-Apr-26 19:45:21 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-26 19:45:21 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-26 19:45:21 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-26 19:45:21 LOG5 finish_task: Level: (4) ID = <10188> Status = 0 0 0 0 ok 2008-Apr-26 19:45:21 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-26 19:45:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 19:45:21 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-26 19:45:21 LOG5 end_task: Level: (4) ID = <10188> Status = 0 0 0 0 ok 2008-Apr-26 19:45:21 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-26 19:45:21 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-26 19:45:21 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-26 19:45:21 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-26 19:45:21 LOG5 begin_task: Level: (4) ID = <10192> Status = 0 0 0 0 ok 2008-Apr-26 19:45:21 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080426.a2048.0003.fits} 2008-Apr-26 19:45:21 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-26 19:45:21 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-26 19:45:21 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-26 19:45:21 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-26 19:45:21 LOG5 end_task: Level: (4) ID = <10192> Status = 0 0 0 0 ok 2008-Apr-26 19:45:21 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-26 19:45:21 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-26 19:45:21 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-26 19:45:21 LOG5 begin_task: Level: (4) ID = <10193> Status = 0 0 0 0 ok 2008-Apr-26 19:45:21 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-26 19:45:21 LOG5 log_alfabeam: Parameters: 9.8676388888888891 23.483888888888888 9.661539 2008.3225822305881 -8.500033 2008-Apr-26 19:45:21 LOG4 log_alfabeam: ALFABEAM 0 9.867638888888882 23.483888888888877 2008-Apr-26 19:45:21 LOG4 log_alfabeam: ALFABEAM 1 9.867991903567550 23.383204621684850 2008-Apr-26 19:45:21 LOG4 log_alfabeam: ALFABEAM 2 9.873846654942163 23.450022823813018 2008-Apr-26 19:45:21 LOG4 log_alfabeam: ALFABEAM 3 9.873480364340436 23.551235925945509 2008-Apr-26 19:45:21 LOG4 log_alfabeam: ALFABEAM 4 9.867164971151828 23.584931639155119 2008-Apr-26 19:45:21 LOG4 log_alfabeam: ALFABEAM 5 9.861406253368074 23.516270364025548 2008-Apr-26 19:45:21 LOG4 log_alfabeam: ALFABEAM 6 9.861866130175605 23.415752667030205 2008-Apr-26 19:45:21 INFO2 take_spectra: Starting WAPP scan: 811700460 2008-Apr-26 19:45:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-26 19:45:22 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-26 19:45:22 LOG5 begin_task: Level: (5) ID = <10194> Status = 0 0 0 0 ok 2008-Apr-26 19:45:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-26 19:45:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85523.00 2008-Apr-26 19:45:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.114694 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-26 19:45:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.114694 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-26 19:45:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.114694 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-26 19:45:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.570 > 1.4)! 2008-Apr-26 19:45:28 LOG4 check_wapp_levels: WAPP-1 power levels: 1.084 1.012 1.082 1.018 2008-Apr-26 19:45:28 LOG4 check_wapp_levels: WAPP-2 power levels: 1.360 1.266 1.339 1.417 2008-Apr-26 19:45:28 LOG4 check_wapp_levels: WAPP-3 power levels: 0.908 0.942 1.004 1.132 2008-Apr-26 19:45:28 LOG4 check_wapp_levels: WAPP-4 power levels: 1.386 1.411 1.511 1.570 2008-Apr-26 19:45:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.114694 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-26 19:45:28 LOG3 WAPP=1+3+4-save_rfcalc: Channel 4: Sky freq = 1381.114694 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-26 19:45:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.114694 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 19:45:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.114694 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 19:45:28 LOG3 WAPP=1+3+4-save_rfcalc: Channel 7: Sky freq = 1381.114694 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 19:45:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.114694 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 19:45:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-26 19:45:28 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-26 19:45:28 LOG5 end_task: Level: (5) ID = <10194> Status = 0 0 0 0 ok 2008-Apr-26 19:45:28 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-26 19:45:28 LOG5 end_task: Level: (4) ID = <10193> Status = 0 0 0 0 ok 2008-Apr-26 19:45:28 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-26 19:45:28 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-26 19:45:28 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-26 19:45:28 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-26 19:45:28 LOG5 begin_task: Level: (4) ID = <10195> Status = 0 0 0 0 ok 2008-Apr-26 19:45:28 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-26 19:45:28 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-26 19:45:28 LOG3 WAPP=2-save_rfcalc: Channel 4: Sky freq = 1381.114694 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-26 19:45:28 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-26 19:45:28 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-26 19:45:28 LOG5 end_task: Level: (4) ID = <10195> Status = 0 0 0 0 ok 2008-Apr-26 19:45:28 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-26 19:45:28 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-26 19:45:28 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-26 19:45:28 LOG5 begin_task: Level: (4) ID = <10196> Status = 0 0 0 0 ok 2008-Apr-26 19:45:28 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-26 19:45:28 LOG5 log_alfabeam: Parameters: 9.8676388888888891 23.483888888888888 9.663488 2008.3225824524045 -8.500033 2008-Apr-26 19:45:28 LOG4 log_alfabeam: ALFABEAM 0 9.867638888888864 23.483888888888892 2008-Apr-26 19:45:28 LOG4 log_alfabeam: ALFABEAM 1 9.868021649691883 23.383225745685611 2008-Apr-26 19:45:28 LOG4 log_alfabeam: ALFABEAM 2 9.873856643767256 23.450370498724073 2008-Apr-26 19:45:28 LOG4 log_alfabeam: ALFABEAM 3 9.873460377688366 23.551562966969218 2008-Apr-26 19:45:28 LOG4 log_alfabeam: ALFABEAM 4 9.867134789924654 23.584904542137870 2008-Apr-26 19:45:28 LOG4 log_alfabeam: ALFABEAM 5 9.861396667176180 23.515917930770378 2008-Apr-26 19:45:28 LOG4 log_alfabeam: ALFABEAM 6 9.861886492763613 23.415427757992227 2008-Apr-26 19:45:28 INFO2 take_spectra: Starting WAPP scan: 811700461 2008-Apr-26 19:45:29 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-26 19:45:29 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-26 19:45:29 LOG5 begin_task: Level: (5) ID = <10197> Status = 0 0 0 0 ok 2008-Apr-26 19:45:29 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-26 19:45:29 LOG3 WAPP=2-save_rfcalc: Channel 7: Sky freq = 1381.114694 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 19:45:29 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85530.00 2008-Apr-26 19:45:34 INFO5 check_wapp_levels: WAPP power levels are between 1.266 and 1.570 (still bad) 2008-Apr-26 19:45:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.114694 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-26 19:45:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.114694 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-26 19:45:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.114694 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-26 19:45:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.114694 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-26 19:45:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.114694 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-26 19:45:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.114694 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 19:45:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.114694 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 19:45:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.114694 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 19:45:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.114694 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 19:45:35 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-26 19:45:35 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-26 19:45:35 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-26 19:45:35 LOG5 end_task: Level: (5) ID = <10197> Status = 0 0 0 0 ok 2008-Apr-26 19:45:35 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-26 19:45:35 LOG5 end_task: Level: (4) ID = <10196> Status = 0 0 0 0 ok 2008-Apr-26 19:45:35 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-26 19:45:35 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-26 19:45:35 LOG5 finish_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2008-Apr-26 19:45:35 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-26 19:45:35 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 19:45:35 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-26 19:45:35 LOG5 end_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2008-Apr-26 19:45:35 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-26 19:45:35 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 210.25 and ZA = 5.93 2008-Apr-26 19:45:35 LOG3 track_source: Calling 'track_source AGES3193_p2_017 210.25 5.9268292182 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-26 19:45:35 START begin_task: Starting task 'sending tracking commands' 2008-Apr-26 19:45:35 LOG5 begin_task: Level: (3) ID = <10198> Status = 0 0 0 0 ok 2008-Apr-26 19:45:35 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_017} INFO {Slewing to source 'AGES3193_p2_017' ...} 2008-Apr-26 19:45:35 INFO1 track_source: Starting to track AGES3193_p2_017 2008-Apr-26 19:45:35 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_017" 2008-Apr-26 19:45:35 LOG3 vw_send: To DATATAKING: set ra 210.25 2008-Apr-26 19:45:35 LOG3 vw_send: To DATATAKING: set dec 5.9268292182 2008-Apr-26 19:45:35 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-26 19:45:35 LOG3 vw_send: To DATATAKING: pnt tr 210.25 5.9268292182 -CF 2008-Apr-26 19:45:35 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-26 19:45:35 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-26 19:45:35 LOG5 finish_task: Level: (3) ID = <10198> Status = 0 0 0 0 ok 2008-Apr-26 19:45:35 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-26 19:45:35 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 19:45:36 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-26 19:45:36 LOG5 end_task: Level: (3) ID = <10198> Status = 0 0 0 0 ok 2008-Apr-26 19:45:36 LOG1 fixed_driftmap: Parameters: HA = -00:13:00.1 Start = 09:40:29.3 LST = 09:39:55.6 diff = 33.7 secs 2008-Apr-26 19:45:36 INFO2 fixed_driftmap: Waiting 31.7 seconds for RA 9:53:29 2008-Apr-26 19:45:36 INFO2 lstwait: Waiting for 31.6 secs from LST 09:39:56 to LST 09:40:27 ... 2008-Apr-26 19:45:36 LOG4 send_obs_status: To obs_status: <1> TASKTIME 31.599935032223264 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-26 19:45:36 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-26 19:45:36 LOG5 begin_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2008-Apr-26 19:45:36 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_017" 2008-Apr-26 19:45:36 LOG4 got_cormsg: From DATATAKING: set ra 210.25 2008-Apr-26 19:45:36 LOG4 got_cormsg: From DATATAKING: set dec 5.9268292182 2008-Apr-26 19:45:36 LOG4 got_cormsg: From DATATAKING: vw% 210.25 2008-Apr-26 19:45:36 LOG4 got_cormsg: From DATATAKING: vw% 5.9268292182 2008-Apr-26 19:45:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 19:45:36 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-26 19:45:36 LOG4 got_cormsg: From DATATAKING: pnt tr 210.25 5.9268292182 -CF 2008-Apr-26 19:45:36 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-26 19:45:36 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-26 19:45:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 19:45:40 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.906 and 1.131 2008-Apr-26 19:46:07 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-26 19:46:07 LOG5 end_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2008-Apr-26 19:46:07 LOG4 lstwait: Finished waiting, the gui caused difference: 0.40034827999946287 2008-Apr-26 19:46:07 INFO3 lstwait: Finished waiting 2008-Apr-26 19:46:07 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-26 19:46:07 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-26 19:46:07 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-26 19:46:07 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-26 19:46:07 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-26 19:46:07 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-26 19:46:07 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-26 19:46:07 LOG5 begin_task: Level: (3) ID = <10200> Status = 0 0 0 0 ok 2008-Apr-26 19:46:07 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-26 19:46:07 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-26 19:46:07 INFO2 take_spectra: Starting WAPP scan: 811700462 2008-Apr-26 19:46:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-26 19:46:08 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-26 19:46:08 LOG5 begin_task: Level: (4) ID = <10201> Status = 0 0 0 0 ok 2008-Apr-26 19:46:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-26 19:46:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85569.00 2008-Apr-26 19:46:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.114694 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-26 19:46:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.114694 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-26 19:46:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.114694 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-26 19:46:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.114694 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-26 19:46:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.114694 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-26 19:46:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.114694 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 19:46:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.114694 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 19:46:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.114694 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 19:46:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.114694 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 20:05:20 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 20:05:20.294 (seconds: 72320.294)!} 2008-Apr-26 20:05:20 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 20:05:20.294 (seconds: 72320.294)! 2008-Apr-26 20:05:21 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 72319.0 to 72320.0! 2008-Apr-26 20:05:22 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (72319.0 - 72321.0)! 2008-Apr-26 20:06:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-26 20:06:09 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-26 20:06:09 LOG5 end_task: Level: (4) ID = <10201> Status = 0 0 0 0 ok 2008-Apr-26 20:06:09 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-26 20:06:09 LOG5 end_task: Level: (3) ID = <10200> Status = 0 0 0 0 ok 2008-Apr-26 20:06:09 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-26 20:06:09 LOG5 finish_task: Level: (2) ID = <10167> Status = 0 0 0 0 ok 2008-Apr-26 20:06:09 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-26 20:06:09 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-26 20:06:09 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-26 20:06:09 LOG5 end_task: Level: (2) ID = <10167> Status = 0 0 0 0 ok 2008-Apr-26 20:06:09 COMMAND run_command_line: EXECUTING command 19: 'FIXEDDRIFT az=149.50 alfaangle=47.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_019 ra=95300.00 dec=232600.00' 2008-Apr-26 20:06:09 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-26 20:06:10 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-26 20:06:10 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 149.50 47.0 hcorcal 5 tracking no first 1 AGES3193_p2_019 95300.00 232600.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-26 20:06:10 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-26 20:06:10 LOG5 begin_task: Level: (2) ID = <10202> Status = 0 0 0 0 ok 2008-Apr-26 20:06:10 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES3193_p2_017' 2008-Apr-26 20:06:10 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-26 20:06:10 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p2_019} 2008-Apr-26 20:06:10 INFO3 fixed_driftmap: Sending telescope to Az = 149.50 and ZA = 5.88 2008-Apr-26 20:06:10 LOG3 track_source: Calling 'track_source AGES3193_p2_019 149.50 5.8839444930 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-26 20:06:10 START begin_task: Starting task 'sending tracking commands' 2008-Apr-26 20:06:10 LOG5 begin_task: Level: (3) ID = <10203> Status = 0 0 0 0 ok 2008-Apr-26 20:06:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_019} INFO {Slewing to source 'AGES3193_p2_019' ...} 2008-Apr-26 20:06:10 INFO1 track_source: Starting to track AGES3193_p2_019 2008-Apr-26 20:06:10 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_019" 2008-Apr-26 20:06:10 LOG3 vw_send: To DATATAKING: set ra 149.50 2008-Apr-26 20:06:10 LOG3 vw_send: To DATATAKING: set dec 5.8839444930 2008-Apr-26 20:06:10 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-26 20:06:10 LOG3 vw_send: To DATATAKING: pnt tr 149.50 5.8839444930 -CF 2008-Apr-26 20:06:10 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-26 20:06:10 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-26 20:06:10 LOG5 finish_task: Level: (3) ID = <10203> Status = 0 0 0 0 ok 2008-Apr-26 20:06:10 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-26 20:06:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 20:06:10 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-26 20:06:10 LOG5 end_task: Level: (3) ID = <10203> Status = 0 0 0 0 ok 2008-Apr-26 20:06:10 START begin_task: Starting task 'rotate ALFA to +47 degrees' 2008-Apr-26 20:06:10 LOG5 begin_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2008-Apr-26 20:06:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +47 degrees ...} 2008-Apr-26 20:06:10 INFO2 rotate_alfa: ALFA commanded to +47.0 degrees 2008-Apr-26 20:06:10 LOG3 sock_errsend: To ALFAMOTOR: POSITION 47.0 REPLY 2008-Apr-26 20:06:10 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-26 20:06:10 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-26 20:06:10 LOG5 begin_task: Level: (4) ID = <10205> Status = 0 0 0 0 ok 2008-Apr-26 20:06:10 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_019" 2008-Apr-26 20:06:10 LOG4 got_cormsg: From DATATAKING: set ra 149.50 2008-Apr-26 20:06:10 LOG4 got_cormsg: From DATATAKING: set dec 5.8839444930 2008-Apr-26 20:06:10 LOG4 got_cormsg: From DATATAKING: vw% 149.50 2008-Apr-26 20:06:10 LOG4 got_cormsg: From DATATAKING: vw% 5.8839444930 2008-Apr-26 20:06:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 20:06:10 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-26 20:06:10 LOG4 got_cormsg: From DATATAKING: pnt tr 149.50 5.8839444930 -CF 2008-Apr-26 20:06:10 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-26 20:06:10 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-26 20:06:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 20:06:42 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-26 20:06:42 INFO3 alfa_motor: ALFA rotator in-position +47.00 degrees 2008-Apr-26 20:06:42 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-26 20:06:42 LOG5 end_task: Level: (4) ID = <10205> Status = 0 0 0 0 ok 2008-Apr-26 20:06:42 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-26 20:06:42 STOP finish_task: Finishing task 'rotate ALFA to +47 degrees' 2008-Apr-26 20:06:42 LOG5 finish_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2008-Apr-26 20:06:42 INFO2 finish_task: DONE finished configuration: rotating ALFA to +47 degrees 2008-Apr-26 20:06:42 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 20:06:42 STOP end_task: Finishing task 'rotate ALFA to +47 degrees' with status 'OK' 2008-Apr-26 20:06:42 LOG5 end_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2008-Apr-26 20:06:42 START begin_task: Starting task 'waiting on telescope' 2008-Apr-26 20:06:42 LOG5 begin_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2008-Apr-26 20:06:42 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-26 20:06:42 LOG3 waittrk: Start waittrk 5 2008-Apr-26 20:06:42 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-26 20:06:42 LOG5 begin_task: Level: (4) ID = <10207> Status = 0 0 0 0 ok 2008-Apr-26 20:06:47 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-26 20:06:47 LOG5 end_task: Level: (4) ID = <10207> Status = 0 0 0 0 ok 2008-Apr-26 20:06:47 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-26 20:06:47 LOG5 begin_task: Level: (4) ID = <10208> Status = 0 0 0 0 ok 2008-Apr-26 20:08:48 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-26 20:08:48 LOG5 end_task: Level: (4) ID = <10208> Status = 0 0 0 0 ok 2008-Apr-26 20:08:48 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-26 20:08:48 INFO2 waittrk: Now tracking AGES3193_p2_019 2008-Apr-26 20:08:48 LOG4 waittrk: Current telescope position: Az = 149.28 ZA = 5.90 2008-Apr-26 20:08:48 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-26 20:08:48 LOG5 finish_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2008-Apr-26 20:08:48 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-26 20:08:48 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 20:08:48 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-26 20:08:48 LOG5 end_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2008-Apr-26 20:08:48 START begin_task: Starting task 'selecting calibration type' 2008-Apr-26 20:08:48 LOG5 begin_task: Level: (3) ID = <10209> Status = 0 0 0 0 ok 2008-Apr-26 20:08:48 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-26 20:08:48 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-26 20:08:48 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 20:08:48 START begin_task: Starting task 'waiting on setcal' 2008-Apr-26 20:08:48 LOG5 begin_task: Level: (4) ID = <10210> Status = 0 0 0 0 ok 2008-Apr-26 20:08:48 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-26 20:08:48 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 20:08:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 20:08:49 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-26 20:08:49 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-26 20:08:49 LOG5 end_task: Level: (4) ID = <10210> Status = 0 0 0 0 ok 2008-Apr-26 20:08:49 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-26 20:08:49 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-26 20:08:49 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-26 20:08:49 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-26 20:08:49 LOG5 begin_task: Level: (4) ID = <10211> Status = 0 0 0 0 ok 2008-Apr-26 20:08:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 20:08:49 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-26 20:08:49 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-26 20:08:49 LOG5 end_task: Level: (4) ID = <10211> Status = 0 0 0 0 ok 2008-Apr-26 20:08:49 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-26 20:08:49 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-26 20:08:49 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-26 20:08:49 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-26 20:08:49 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-26 20:08:49 LOG5 begin_task: Level: (4) ID = <10212> Status = 0 0 0 0 ok 2008-Apr-26 20:08:49 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-26 20:08:49 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-26 20:08:49 LOG5 end_task: Level: (4) ID = <10212> Status = 0 0 0 0 ok 2008-Apr-26 20:08:49 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-26 20:08:49 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-26 20:08:49 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-26 20:08:49 LOG5 finish_task: Level: (3) ID = <10209> Status = 0 0 0 0 ok 2008-Apr-26 20:08:49 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-26 20:08:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 20:08:50 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-26 20:08:50 LOG5 end_task: Level: (3) ID = <10209> Status = 0 0 0 0 ok 2008-Apr-26 20:08:50 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2008-Apr-26 20:08:50 INFO2 astwait: Waiting for 134 seconds from 00:08:50 to 00:11:04 UTC ... 2008-Apr-26 20:08:50 LOG4 send_obs_status: To obs_status: <1> TASKTIME 134 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-26 20:08:50 START begin_task: Starting task 'waiting on waiting for AST time' 2008-Apr-26 20:08:50 LOG5 begin_task: Level: (3) ID = <10213> Status = 0 0 0 0 ok 2008-Apr-26 20:11:04 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2008-Apr-26 20:11:04 LOG5 end_task: Level: (3) ID = <10213> Status = 0 0 0 0 ok 2008-Apr-26 20:11:04 INFO3 astwait: Finished waiting 2008-Apr-26 20:11:04 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-26 20:11:04 LOG5 dopset_later: Calling 'dopset_later 61.382920326609778' 2008-Apr-26 20:11:04 INFO3 dopset_later: Setting Doppler correction for 20:12:04 (61.4 seconds from now) 2008-Apr-26 20:11:04 LOG5 antvel: Calling 'antvel 149.500000 5.883944 F 61.382920326609778' 2008-Apr-26 20:11:04 LOG2 antvel: Parameters to Doppler: Heliocentric 87124 2008 117 0.0 2008-Apr-26 20:11:04 INFO5 antvel: Computed antenna velocity: +27.99373 km/s 2008-Apr-26 20:11:04 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=27.993729602399998 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-26 20:11:04 INFO4 dopset_gen: New sky frequencies: 1381.114464 1381.114464 1381.114464 1381.114464 1381.114464 1381.114464 1381.114464 1381.114464 1381.114464 2008-Apr-26 20:11:04 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.114464 sky0=1381.114464 sky1=1381.114464 sky2=1381.114464 sky3=1381.114464 sky4=1381.114464 sky5=1381.114464 sky6=1381.114464 sky7=1381.114464 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-26 20:11:04 LOG2 dopset_gen: Result from 'sky2syn': 1631.114464 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-26 20:11:04 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631114464.0} 2008-Apr-26 20:11:04 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 20:11:04 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-26 20:11:04 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-26 20:11:04 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:02.7 Dec = +23:26:01.9 2008-Apr-26 20:11:04 LOG3 track_source: Calling 'track_source AGES3193_p2_019 095202.7 232601.9 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-26 20:11:04 START begin_task: Starting task 'sending tracking commands' 2008-Apr-26 20:11:04 LOG5 begin_task: Level: (3) ID = <10214> Status = 0 0 0 0 ok 2008-Apr-26 20:11:04 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_019} INFO {Slewing to source 'AGES3193_p2_019' ...} 2008-Apr-26 20:11:04 INFO1 track_source: Starting to track AGES3193_p2_019 2008-Apr-26 20:11:04 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_019" 2008-Apr-26 20:11:04 LOG3 vw_send: To DATATAKING: set ra 095202.7 2008-Apr-26 20:11:04 LOG3 vw_send: To DATATAKING: set dec 232601.9 2008-Apr-26 20:11:04 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-26 20:11:04 LOG3 vw_send: To DATATAKING: pnt tr 095202.7 232601.9 -CJ 2008-Apr-26 20:11:04 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-26 20:11:04 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-26 20:11:04 LOG5 finish_task: Level: (3) ID = <10214> Status = 0 0 0 0 ok 2008-Apr-26 20:11:04 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-26 20:11:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 20:11:04 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-26 20:11:04 LOG5 end_task: Level: (3) ID = <10214> Status = 0 0 0 0 ok 2008-Apr-26 20:11:04 START begin_task: Starting task 'waiting on telescope' 2008-Apr-26 20:11:04 LOG5 begin_task: Level: (3) ID = <10215> Status = 0 0 0 0 ok 2008-Apr-26 20:11:04 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-26 20:11:04 LOG3 waittrk: Start waittrk 5 2008-Apr-26 20:11:04 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-26 20:11:04 LOG5 begin_task: Level: (4) ID = <10216> Status = 0 0 0 0 ok 2008-Apr-26 20:11:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631114464.0} 2008-Apr-26 20:11:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 20:11:04 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_019" 2008-Apr-26 20:11:04 LOG4 got_cormsg: From DATATAKING: set ra 095202.7 2008-Apr-26 20:11:04 LOG4 got_cormsg: From DATATAKING: set dec 232601.9 2008-Apr-26 20:11:04 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-26 20:11:04 LOG4 got_cormsg: From DATATAKING: vw% 095202.7 2008-Apr-26 20:11:04 LOG4 got_cormsg: From DATATAKING: vw% 232601.9 2008-Apr-26 20:11:04 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 20:11:04 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-26 20:11:04 LOG4 got_cormsg: From DATATAKING: pnt tr 095202.7 232601.9 -CJ 2008-Apr-26 20:11:04 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-26 20:11:04 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-26 20:11:04 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 20:11:09 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-26 20:11:09 LOG5 end_task: Level: (4) ID = <10216> Status = 0 0 0 0 ok 2008-Apr-26 20:11:09 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-26 20:11:09 LOG5 begin_task: Level: (4) ID = <10217> Status = 0 0 0 0 ok 2008-Apr-26 20:11:11 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-26 20:11:11 LOG5 end_task: Level: (4) ID = <10217> Status = 0 0 0 0 ok 2008-Apr-26 20:11:11 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-26 20:11:11 INFO2 waittrk: Now tracking AGES3193_p2_019 2008-Apr-26 20:11:11 LOG4 waittrk: Current telescope position: Az = 149.16 ZA = 5.91 2008-Apr-26 20:11:11 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-26 20:11:11 LOG5 finish_task: Level: (3) ID = <10215> Status = 0 0 0 0 ok 2008-Apr-26 20:11:11 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-26 20:11:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 20:11:11 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-26 20:11:11 LOG5 end_task: Level: (3) ID = <10215> Status = 0 0 0 0 ok 2008-Apr-26 20:11:11 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-26 20:11:11 LOG5 begin_task: Level: (3) ID = <10218> Status = 0 0 0 0 ok 2008-Apr-26 20:11:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-26 20:11:11 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-26 20:11:11 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-26 20:11:11 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-26 20:11:11 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 20:11:11 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-26 20:11:11 LOG5 begin_task: Level: (4) ID = <10219> Status = 0 0 0 0 ok 2008-Apr-26 20:11:11 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-26 20:11:11 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 20:11:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 20:11:14 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-26 20:11:14 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-26 20:11:14 LOG5 end_task: Level: (4) ID = <10219> Status = 0 0 0 0 ok 2008-Apr-26 20:11:14 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-26 20:11:14 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-26 20:11:14 LOG5 begin_task: Level: (4) ID = <10220> Status = 0 0 0 0 ok 2008-Apr-26 20:11:14 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-26 20:11:14 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-26 20:11:14 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-26 20:11:14 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-26 20:11:14 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-26 20:11:15 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-26 20:11:15 LOG5 begin_task: Level: (5) ID = <10221> Status = 0 0 0 0 ok 2008-Apr-26 20:11:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 20:11:15 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-26 20:11:15 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 1 dB --- beam 1: 7 6 dB 2008-Apr-26 20:11:15 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 6 dB 2008-Apr-26 20:11:15 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-26 20:11:15 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 2 2 dB 2008-Apr-26 20:11:15 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-26 20:11:15 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-26 20:11:15 LOG5 end_task: Level: (5) ID = <10221> Status = 0 0 0 0 ok 2008-Apr-26 20:11:15 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.096 1.010 ALFA beam 1: 1.057 1.029 2008-Apr-26 20:11:15 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.991 0.911 ALFA beam 3: 0.960 1.011 2008-Apr-26 20:11:15 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.894 0.939 ALFA beam 5: 0.970 0.884 2008-Apr-26 20:11:15 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.940 1.005 ALFA beam 7: 1.026 1.117 2008-Apr-26 20:11:15 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-26 20:11:15 LOG5 finish_task: Level: (4) ID = <10220> Status = 0 0 0 0 ok 2008-Apr-26 20:11:15 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-26 20:11:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 20:11:15 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-26 20:11:15 LOG5 end_task: Level: (4) ID = <10220> Status = 0 0 0 0 ok 2008-Apr-26 20:11:15 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-26 20:11:15 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-26 20:11:15 LOG5 finish_task: Level: (3) ID = <10218> Status = 0 0 0 0 ok 2008-Apr-26 20:11:15 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-26 20:11:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 20:11:15 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-26 20:11:15 LOG5 end_task: Level: (3) ID = <10218> Status = 0 0 0 0 ok 2008-Apr-26 20:11:15 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 SS 2008-Apr-26 20:11:15 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 SS 2008-Apr-26 20:11:15 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 SS 2008-Apr-26 20:11:15 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 SS 2008-Apr-26 20:11:15 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-26 20:11:15 START begin_task: Starting task 'WAPP calibration' 2008-Apr-26 20:11:15 LOG5 begin_task: Level: (3) ID = <10222> Status = 0 0 0 0 ok 2008-Apr-26 20:11:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-26 20:11:15 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-26 20:11:15 START begin_task: Starting task 'selecting calibration type' 2008-Apr-26 20:11:15 LOG5 begin_task: Level: (4) ID = <10223> Status = 0 0 0 0 ok 2008-Apr-26 20:11:15 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-26 20:11:15 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-26 20:11:15 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 20:11:15 START begin_task: Starting task 'waiting on setcal' 2008-Apr-26 20:11:15 LOG5 begin_task: Level: (5) ID = <10224> Status = 0 0 0 0 ok 2008-Apr-26 20:11:15 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 SS' 2008-Apr-26 20:11:16 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-26 20:11:16 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 20:11:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 20:11:16 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-26 20:11:16 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-26 20:11:16 LOG5 end_task: Level: (5) ID = <10224> Status = 0 0 0 0 ok 2008-Apr-26 20:11:16 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-26 20:11:16 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-26 20:11:16 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-26 20:11:16 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-26 20:11:16 LOG5 begin_task: Level: (5) ID = <10225> Status = 0 0 0 0 ok 2008-Apr-26 20:11:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 20:11:16 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-26 20:11:16 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-26 20:11:16 LOG5 end_task: Level: (5) ID = <10225> Status = 0 0 0 0 ok 2008-Apr-26 20:11:16 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-26 20:11:16 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-26 20:11:16 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-26 20:11:16 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-26 20:11:16 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-26 20:11:16 LOG5 begin_task: Level: (5) ID = <10226> Status = 0 0 0 0 ok 2008-Apr-26 20:11:16 NOTE WAPPDATA-new_file: New FITS file: wapp.20080426.a2048.0004.fits 2008-Apr-26 20:11:16 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-26 20:11:16 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-26 20:11:16 LOG5 end_task: Level: (5) ID = <10226> Status = 0 0 0 0 ok 2008-Apr-26 20:11:16 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-26 20:11:16 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-26 20:11:16 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-26 20:11:16 LOG5 finish_task: Level: (4) ID = <10223> Status = 0 0 0 0 ok 2008-Apr-26 20:11:16 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-26 20:11:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 20:11:16 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-26 20:11:16 LOG5 end_task: Level: (4) ID = <10223> Status = 0 0 0 0 ok 2008-Apr-26 20:11:16 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-26 20:11:16 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-26 20:11:16 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-26 20:11:16 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-26 20:11:16 LOG5 begin_task: Level: (4) ID = <10227> Status = 0 0 0 0 ok 2008-Apr-26 20:11:16 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080426.a2048.0004.fits} 2008-Apr-26 20:11:16 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-26 20:11:16 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-26 20:11:16 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-26 20:11:16 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-26 20:11:16 LOG5 end_task: Level: (4) ID = <10227> Status = 0 0 0 0 ok 2008-Apr-26 20:11:16 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-26 20:11:16 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-26 20:11:16 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-26 20:11:16 LOG5 begin_task: Level: (4) ID = <10228> Status = 0 0 0 0 ok 2008-Apr-26 20:11:16 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-26 20:11:16 LOG5 log_alfabeam: Parameters: 9.8674166666666672 23.43386111111111 10.094666 2008.3226315055645 46.999924 2008-Apr-26 20:11:16 LOG4 log_alfabeam: ALFABEAM 0 9.867416666666672 23.433861111111103 2008-Apr-26 20:11:16 LOG4 log_alfabeam: ALFABEAM 1 9.869728693904968 23.333391800857839 2008-Apr-26 20:11:16 LOG4 log_alfabeam: ALFABEAM 2 9.874222465274791 23.400022673939667 2008-Apr-26 20:11:16 LOG4 log_alfabeam: ALFABEAM 3 9.872029477516312 23.501029634436271 2008-Apr-26 20:11:16 LOG4 log_alfabeam: ALFABEAM 4 9.865162495399028 23.534708605320446 2008-Apr-26 20:11:16 LOG4 log_alfabeam: ALFABEAM 5 9.860531577218223 23.466206006895746 2008-Apr-26 20:11:16 LOG4 log_alfabeam: ALFABEAM 6 9.862904529788656 23.365910106952118 2008-Apr-26 20:11:16 INFO2 take_spectra: Starting WAPP scan: 811700463 2008-Apr-26 20:11:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-26 20:11:17 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-26 20:11:17 LOG5 begin_task: Level: (5) ID = <10229> Status = 0 0 0 0 ok 2008-Apr-26 20:11:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-26 20:11:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 678.00 2008-Apr-26 20:11:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.114464 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-26 20:11:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.114464 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-26 20:11:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.114464 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-26 20:11:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.114464 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-26 20:11:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.114464 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-26 20:11:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.114464 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 20:11:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.114464 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 20:11:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.114464 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 20:11:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.114464 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 20:11:23 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-26 20:11:23 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-26 20:11:23 LOG5 end_task: Level: (5) ID = <10229> Status = 0 0 0 0 ok 2008-Apr-26 20:11:23 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-26 20:11:23 LOG5 end_task: Level: (4) ID = <10228> Status = 0 0 0 0 ok 2008-Apr-26 20:11:23 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-26 20:11:23 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-26 20:11:23 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-26 20:11:23 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-26 20:11:23 LOG5 begin_task: Level: (4) ID = <10230> Status = 0 0 0 0 ok 2008-Apr-26 20:11:23 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-26 20:11:23 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-26 20:11:23 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-26 20:11:23 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-26 20:11:23 LOG5 end_task: Level: (4) ID = <10230> Status = 0 0 0 0 ok 2008-Apr-26 20:11:23 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-26 20:11:23 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-26 20:11:23 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-26 20:11:23 LOG5 begin_task: Level: (4) ID = <10231> Status = 0 0 0 0 ok 2008-Apr-26 20:11:23 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-26 20:11:23 LOG5 log_alfabeam: Parameters: 9.8674166666666672 23.43386111111111 10.096615 2008.3226317273811 46.999924 2008-Apr-26 20:11:23 LOG4 log_alfabeam: ALFABEAM 0 9.867416666666680 23.433861111111113 2008-Apr-26 20:11:23 LOG4 log_alfabeam: ALFABEAM 1 9.869758027261440 23.333520498492906 2008-Apr-26 20:11:23 LOG4 log_alfabeam: ALFABEAM 2 9.874232427873798 23.400402507816388 2008-Apr-26 20:11:23 LOG4 log_alfabeam: ALFABEAM 3 9.872009631103930 23.501286105062558 2008-Apr-26 20:11:23 LOG4 log_alfabeam: ALFABEAM 4 9.865132859504875 23.534582171291028 2008-Apr-26 20:11:23 LOG4 log_alfabeam: ALFABEAM 5 9.860522250999479 23.465825255162432 2008-Apr-26 20:11:23 LOG4 log_alfabeam: ALFABEAM 6 9.862924359604220 23.365661045015358 2008-Apr-26 20:11:23 INFO2 take_spectra: Starting WAPP scan: 811700464 2008-Apr-26 20:11:24 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-26 20:11:24 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-26 20:11:24 LOG5 begin_task: Level: (5) ID = <10232> Status = 0 0 0 0 ok 2008-Apr-26 20:11:24 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-26 20:11:24 INFO1 WAPP=1+2+3+4-start_spectra: start sec 685.00 2008-Apr-26 20:11:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.580 > 1.4)! 2008-Apr-26 20:11:29 LOG4 check_wapp_levels: WAPP-1 power levels: 1.530 1.303 1.454 1.415 2008-Apr-26 20:11:29 LOG4 check_wapp_levels: WAPP-2 power levels: 1.366 1.270 1.341 1.401 2008-Apr-26 20:11:29 LOG4 check_wapp_levels: WAPP-3 power levels: 1.261 1.320 1.373 1.195 2008-Apr-26 20:11:29 LOG4 check_wapp_levels: WAPP-4 power levels: 1.348 1.421 1.471 1.580 2008-Apr-26 20:11:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.114464 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-26 20:11:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.114464 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-26 20:11:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.114464 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-26 20:11:30 LOG3 WAPP=1+3+4-save_rfcalc: Channel 3: Sky freq = 1381.114464 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-26 20:11:30 LOG3 WAPP=1+3+4-save_rfcalc: Channel 4: Sky freq = 1381.114464 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-26 20:11:30 LOG3 WAPP=3+4-save_rfcalc: Channel 5: Sky freq = 1381.114464 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 20:11:30 LOG3 WAPP=3+4-save_rfcalc: Channel 6: Sky freq = 1381.114464 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 20:11:30 LOG3 WAPP=3+4-save_rfcalc: Channel 7: Sky freq = 1381.114464 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 20:11:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.114464 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 20:11:30 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-26 20:11:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-26 20:11:30 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-26 20:11:30 LOG5 end_task: Level: (5) ID = <10232> Status = 0 0 0 0 ok 2008-Apr-26 20:11:30 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-26 20:11:30 LOG5 end_task: Level: (4) ID = <10231> Status = 0 0 0 0 ok 2008-Apr-26 20:11:30 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-26 20:11:30 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-26 20:11:30 LOG5 finish_task: Level: (3) ID = <10222> Status = 0 0 0 0 ok 2008-Apr-26 20:11:30 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-26 20:11:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 20:11:30 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-26 20:11:30 LOG5 end_task: Level: (3) ID = <10222> Status = 0 0 0 0 ok 2008-Apr-26 20:11:30 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-26 20:11:30 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 149.50 and ZA = 5.88 2008-Apr-26 20:11:30 LOG3 track_source: Calling 'track_source AGES3193_p2_019 149.50 5.8839444930 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-26 20:11:30 START begin_task: Starting task 'sending tracking commands' 2008-Apr-26 20:11:30 LOG5 begin_task: Level: (3) ID = <10233> Status = 0 0 0 0 ok 2008-Apr-26 20:11:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_019} INFO {Slewing to source 'AGES3193_p2_019' ...} 2008-Apr-26 20:11:30 INFO1 track_source: Starting to track AGES3193_p2_019 2008-Apr-26 20:11:30 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_019" 2008-Apr-26 20:11:30 LOG3 vw_send: To DATATAKING: set ra 149.50 2008-Apr-26 20:11:30 LOG3 vw_send: To DATATAKING: set dec 5.8839444930 2008-Apr-26 20:11:30 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-26 20:11:30 LOG3 vw_send: To DATATAKING: pnt tr 149.50 5.8839444930 -CF 2008-Apr-26 20:11:30 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-26 20:11:30 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-26 20:11:30 LOG5 finish_task: Level: (3) ID = <10233> Status = 0 0 0 0 ok 2008-Apr-26 20:11:30 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-26 20:11:31 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 20:11:31 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-26 20:11:31 LOG5 end_task: Level: (3) ID = <10233> Status = 0 0 0 0 ok 2008-Apr-26 20:11:31 LOG1 fixed_driftmap: Parameters: HA = +00:13:00.0 Start = 10:06:29.3 LST = 10:05:54.8 diff = 34.5 secs 2008-Apr-26 20:11:31 INFO2 fixed_driftmap: Waiting 32.5 seconds for RA 9:53:29 2008-Apr-26 20:11:31 INFO2 lstwait: Waiting for 32.4 secs from LST 10:05:55 to LST 10:06:27 ... 2008-Apr-26 20:11:31 LOG4 send_obs_status: To obs_status: <1> TASKTIME 32.390298515404787 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-26 20:11:31 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-26 20:11:31 LOG5 begin_task: Level: (3) ID = <10234> Status = 0 0 0 0 ok 2008-Apr-26 20:11:31 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_019" 2008-Apr-26 20:11:31 LOG3 WAPP=2-save_rfcalc: Channel 3: Sky freq = 1381.114464 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-26 20:11:31 LOG3 WAPP=1+2-save_rfcalc: Channel 5: Sky freq = 1381.114464 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 20:11:31 LOG3 WAPP=2-save_rfcalc: Channel 4: Sky freq = 1381.114464 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-26 20:11:31 LOG3 WAPP=1+2-save_rfcalc: Channel 6: Sky freq = 1381.114464 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 20:11:31 LOG3 WAPP=1+2-save_rfcalc: Channel 7: Sky freq = 1381.114464 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 20:11:31 LOG4 got_cormsg: From DATATAKING: set ra 149.50 2008-Apr-26 20:11:31 LOG4 got_cormsg: From DATATAKING: set dec 5.8839444930 2008-Apr-26 20:11:31 LOG4 got_cormsg: From DATATAKING: vw% 149.50 2008-Apr-26 20:11:31 LOG4 got_cormsg: From DATATAKING: vw% 5.8839444930 2008-Apr-26 20:11:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 20:11:31 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-26 20:11:31 LOG4 got_cormsg: From DATATAKING: pnt tr 149.50 5.8839444930 -CF 2008-Apr-26 20:11:31 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-26 20:11:31 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-26 20:11:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 20:11:35 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.884 and 1.117 2008-Apr-26 20:12:03 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-26 20:12:03 LOG5 end_task: Level: (3) ID = <10234> Status = 0 0 0 0 ok 2008-Apr-26 20:12:03 LOG4 lstwait: Finished waiting, the gui caused difference: 0.61222088000150165 2008-Apr-26 20:12:03 INFO3 lstwait: Finished waiting 2008-Apr-26 20:12:03 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-26 20:12:03 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-26 20:12:03 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-26 20:12:03 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-26 20:12:03 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-26 20:12:03 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-26 20:12:03 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-26 20:12:03 LOG5 begin_task: Level: (3) ID = <10235> Status = 0 0 0 0 ok 2008-Apr-26 20:12:03 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-26 20:12:03 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-26 20:12:03 INFO2 take_spectra: Starting WAPP scan: 811700465 2008-Apr-26 20:12:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-26 20:12:04 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-26 20:12:04 LOG5 begin_task: Level: (4) ID = <10236> Status = 0 0 0 0 ok 2008-Apr-26 20:12:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-26 20:12:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 725.00 2008-Apr-26 20:12:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.114464 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-26 20:12:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.114464 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-26 20:12:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.114464 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-26 20:12:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.114464 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-26 20:12:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.114464 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-26 20:12:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.114464 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 20:12:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.114464 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 20:12:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.114464 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 20:12:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.114464 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 20:20:19 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 20:20:19.294 (seconds: 73219.294)!} 2008-Apr-26 20:20:19 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 20:20:19.294 (seconds: 73219.294)! 2008-Apr-26 20:20:20 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 73218.0 to 73219.0! 2008-Apr-26 20:20:21 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (73218.0 - 73220.0)! 2008-Apr-26 20:32:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-26 20:32:05 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-26 20:32:05 LOG5 end_task: Level: (4) ID = <10236> Status = 0 0 0 0 ok 2008-Apr-26 20:32:05 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-26 20:32:05 LOG5 end_task: Level: (3) ID = <10235> Status = 0 0 0 0 ok 2008-Apr-26 20:32:05 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-26 20:32:05 LOG5 finish_task: Level: (2) ID = <10202> Status = 0 0 0 0 ok 2008-Apr-26 20:32:05 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-26 20:32:05 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-26 20:32:05 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-26 20:32:05 LOG5 end_task: Level: (2) ID = <10202> Status = 0 0 0 0 ok 2008-Apr-26 20:32:05 COMMAND run_command_line: EXECUTING command 23: 'FIXEDDRIFT az=122.23 alfaangle=76.2 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_021 ra=95300.00 dec=232300.00' 2008-Apr-26 20:32:05 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-26 20:32:06 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-26 20:32:06 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 122.23 76.2 hcorcal 5 tracking no first 1 AGES3193_p2_021 95300.00 232300.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-26 20:32:06 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-26 20:32:06 LOG5 begin_task: Level: (2) ID = <10237> Status = 0 0 0 0 ok 2008-Apr-26 20:32:06 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES3193_p2_019' 2008-Apr-26 20:32:06 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-26 20:32:06 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p2_021} 2008-Apr-26 20:32:06 INFO3 fixed_driftmap: Sending telescope to Az = 122.23 and ZA = 9.78 2008-Apr-26 20:32:06 LOG3 track_source: Calling 'track_source AGES3193_p2_021 122.23 9.7758214154 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-26 20:32:06 START begin_task: Starting task 'sending tracking commands' 2008-Apr-26 20:32:06 LOG5 begin_task: Level: (3) ID = <10238> Status = 0 0 0 0 ok 2008-Apr-26 20:32:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_021} INFO {Slewing to source 'AGES3193_p2_021' ...} 2008-Apr-26 20:32:06 INFO1 track_source: Starting to track AGES3193_p2_021 2008-Apr-26 20:32:06 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_021" 2008-Apr-26 20:32:06 LOG3 vw_send: To DATATAKING: set ra 122.23 2008-Apr-26 20:32:06 LOG3 vw_send: To DATATAKING: set dec 9.7758214154 2008-Apr-26 20:32:06 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-26 20:32:06 LOG3 vw_send: To DATATAKING: pnt tr 122.23 9.7758214154 -CF 2008-Apr-26 20:32:06 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-26 20:32:06 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-26 20:32:06 LOG5 finish_task: Level: (3) ID = <10238> Status = 0 0 0 0 ok 2008-Apr-26 20:32:06 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-26 20:32:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 20:32:06 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-26 20:32:06 LOG5 end_task: Level: (3) ID = <10238> Status = 0 0 0 0 ok 2008-Apr-26 20:32:06 START begin_task: Starting task 'rotate ALFA to +76.2 degrees' 2008-Apr-26 20:32:06 LOG5 begin_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2008-Apr-26 20:32:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +76.2 degrees ...} 2008-Apr-26 20:32:06 INFO2 rotate_alfa: ALFA commanded to +76.2 degrees 2008-Apr-26 20:32:06 LOG3 sock_errsend: To ALFAMOTOR: POSITION 76.2 REPLY 2008-Apr-26 20:32:06 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-26 20:32:06 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-26 20:32:06 LOG5 begin_task: Level: (4) ID = <10240> Status = 0 0 0 0 ok 2008-Apr-26 20:32:06 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_021" 2008-Apr-26 20:32:06 LOG4 got_cormsg: From DATATAKING: set ra 122.23 2008-Apr-26 20:32:06 LOG4 got_cormsg: From DATATAKING: set dec 9.7758214154 2008-Apr-26 20:32:06 LOG4 got_cormsg: From DATATAKING: vw% 122.23 2008-Apr-26 20:32:06 LOG4 got_cormsg: From DATATAKING: vw% 9.7758214154 2008-Apr-26 20:32:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 20:32:06 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-26 20:32:06 LOG4 got_cormsg: From DATATAKING: pnt tr 122.23 9.7758214154 -CF 2008-Apr-26 20:32:06 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-26 20:32:06 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-26 20:32:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 20:32:24 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-26 20:32:24 INFO3 alfa_motor: ALFA rotator in-position +76.20 degrees 2008-Apr-26 20:32:24 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-26 20:32:24 LOG5 end_task: Level: (4) ID = <10240> Status = 0 0 0 0 ok 2008-Apr-26 20:32:24 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-26 20:32:24 STOP finish_task: Finishing task 'rotate ALFA to +76.2 degrees' 2008-Apr-26 20:32:24 LOG5 finish_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2008-Apr-26 20:32:24 INFO2 finish_task: DONE finished configuration: rotating ALFA to +76.2 degrees 2008-Apr-26 20:32:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 20:32:24 STOP end_task: Finishing task 'rotate ALFA to +76.2 degrees' with status 'OK' 2008-Apr-26 20:32:24 LOG5 end_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2008-Apr-26 20:32:24 START begin_task: Starting task 'waiting on telescope' 2008-Apr-26 20:32:24 LOG5 begin_task: Level: (3) ID = <10241> Status = 0 0 0 0 ok 2008-Apr-26 20:32:24 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-26 20:32:24 LOG3 waittrk: Start waittrk 5 2008-Apr-26 20:32:24 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-26 20:32:24 LOG5 begin_task: Level: (4) ID = <10242> Status = 0 0 0 0 ok 2008-Apr-26 20:32:29 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-26 20:32:29 LOG5 end_task: Level: (4) ID = <10242> Status = 0 0 0 0 ok 2008-Apr-26 20:32:29 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-26 20:32:29 LOG5 begin_task: Level: (4) ID = <10243> Status = 0 0 0 0 ok 2008-Apr-26 20:33:50 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-26 20:33:50 LOG5 end_task: Level: (4) ID = <10243> Status = 0 0 0 0 ok 2008-Apr-26 20:33:50 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-26 20:33:50 INFO2 waittrk: Now tracking AGES3193_p2_021 2008-Apr-26 20:33:50 LOG4 waittrk: Current telescope position: Az = 122.03 ZA = 9.78 2008-Apr-26 20:33:50 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-26 20:33:50 LOG5 finish_task: Level: (3) ID = <10241> Status = 0 0 0 0 ok 2008-Apr-26 20:33:50 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-26 20:33:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 20:33:50 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-26 20:33:50 LOG5 end_task: Level: (3) ID = <10241> Status = 0 0 0 0 ok 2008-Apr-26 20:33:50 START begin_task: Starting task 'selecting calibration type' 2008-Apr-26 20:33:50 LOG5 begin_task: Level: (3) ID = <10244> Status = 0 0 0 0 ok 2008-Apr-26 20:33:50 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-26 20:33:50 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-26 20:33:50 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 20:33:50 START begin_task: Starting task 'waiting on setcal' 2008-Apr-26 20:33:50 LOG5 begin_task: Level: (4) ID = <10245> Status = 0 0 0 0 ok 2008-Apr-26 20:33:50 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-26 20:33:50 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 20:33:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 20:33:51 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-26 20:33:51 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-26 20:33:51 LOG5 end_task: Level: (4) ID = <10245> Status = 0 0 0 0 ok 2008-Apr-26 20:33:51 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-26 20:33:51 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-26 20:33:51 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-26 20:33:51 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-26 20:33:51 LOG5 begin_task: Level: (4) ID = <10246> Status = 0 0 0 0 ok 2008-Apr-26 20:33:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 20:33:51 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-26 20:33:51 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-26 20:33:51 LOG5 end_task: Level: (4) ID = <10246> Status = 0 0 0 0 ok 2008-Apr-26 20:33:51 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-26 20:33:51 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-26 20:33:51 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-26 20:33:51 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-26 20:33:51 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-26 20:33:51 LOG5 begin_task: Level: (4) ID = <10247> Status = 0 0 0 0 ok 2008-Apr-26 20:33:51 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-26 20:33:51 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-26 20:33:51 LOG5 end_task: Level: (4) ID = <10247> Status = 0 0 0 0 ok 2008-Apr-26 20:33:51 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-26 20:33:51 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-26 20:33:51 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-26 20:33:51 LOG5 finish_task: Level: (3) ID = <10244> Status = 0 0 0 0 ok 2008-Apr-26 20:33:51 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-26 20:33:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 20:33:51 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-26 20:33:51 LOG5 end_task: Level: (3) ID = <10244> Status = 0 0 0 0 ok 2008-Apr-26 20:33:51 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2008-Apr-26 20:33:51 INFO2 astwait: Waiting for 10 seconds from 00:33:51 to 00:34:01 UTC ... 2008-Apr-26 20:33:51 LOG4 send_obs_status: To obs_status: <1> TASKTIME 10 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-26 20:33:51 START begin_task: Starting task 'waiting on waiting for AST time' 2008-Apr-26 20:33:51 LOG5 begin_task: Level: (3) ID = <10248> Status = 0 0 0 0 ok 2008-Apr-26 20:34:01 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2008-Apr-26 20:34:01 LOG5 end_task: Level: (3) ID = <10248> Status = 0 0 0 0 ok 2008-Apr-26 20:34:01 INFO3 astwait: Finished waiting 2008-Apr-26 20:34:01 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-26 20:34:01 LOG5 dopset_later: Calling 'dopset_later 60.681579430667966' 2008-Apr-26 20:34:01 INFO3 dopset_later: Setting Doppler correction for 20:35:01 (60.7 seconds from now) 2008-Apr-26 20:34:01 LOG5 antvel: Calling 'antvel 122.230000 9.775821 F 60.681579430667966' 2008-Apr-26 20:34:01 LOG2 antvel: Parameters to Doppler: Heliocentric 88501 2008 117 0.0 2008-Apr-26 20:34:01 INFO5 antvel: Computed antenna velocity: +28.03787 km/s 2008-Apr-26 20:34:01 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=28.037871832800001 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-26 20:34:01 INFO4 dopset_gen: New sky frequencies: 1381.114261 1381.114261 1381.114261 1381.114261 1381.114261 1381.114261 1381.114261 1381.114261 1381.114261 2008-Apr-26 20:34:01 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.114261 sky0=1381.114261 sky1=1381.114261 sky2=1381.114261 sky3=1381.114261 sky4=1381.114261 sky5=1381.114261 sky6=1381.114261 sky7=1381.114261 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-26 20:34:01 LOG2 dopset_gen: Result from 'sky2syn': 1631.114261 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-26 20:34:01 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631114261.0} 2008-Apr-26 20:34:01 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 20:34:01 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-26 20:34:01 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-26 20:34:01 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:03.4 Dec = +23:23:01.9 2008-Apr-26 20:34:01 LOG3 track_source: Calling 'track_source AGES3193_p2_021 095203.4 232301.9 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-26 20:34:01 START begin_task: Starting task 'sending tracking commands' 2008-Apr-26 20:34:01 LOG5 begin_task: Level: (3) ID = <10249> Status = 0 0 0 0 ok 2008-Apr-26 20:34:01 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_021} INFO {Slewing to source 'AGES3193_p2_021' ...} 2008-Apr-26 20:34:01 INFO1 track_source: Starting to track AGES3193_p2_021 2008-Apr-26 20:34:01 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_021" 2008-Apr-26 20:34:01 LOG3 vw_send: To DATATAKING: set ra 095203.4 2008-Apr-26 20:34:01 LOG3 vw_send: To DATATAKING: set dec 232301.9 2008-Apr-26 20:34:01 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-26 20:34:01 LOG3 vw_send: To DATATAKING: pnt tr 095203.4 232301.9 -CJ 2008-Apr-26 20:34:01 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-26 20:34:01 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-26 20:34:01 LOG5 finish_task: Level: (3) ID = <10249> Status = 0 0 0 0 ok 2008-Apr-26 20:34:01 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-26 20:34:01 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 20:34:01 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-26 20:34:01 LOG5 end_task: Level: (3) ID = <10249> Status = 0 0 0 0 ok 2008-Apr-26 20:34:01 START begin_task: Starting task 'waiting on telescope' 2008-Apr-26 20:34:01 LOG5 begin_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2008-Apr-26 20:34:01 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-26 20:34:01 LOG3 waittrk: Start waittrk 5 2008-Apr-26 20:34:01 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-26 20:34:01 LOG5 begin_task: Level: (4) ID = <10251> Status = 0 0 0 0 ok 2008-Apr-26 20:34:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631114261.0} 2008-Apr-26 20:34:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 20:34:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 20:34:01 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_021" 2008-Apr-26 20:34:01 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-26 20:34:01 LOG4 got_cormsg: From DATATAKING: set ra 095203.4 2008-Apr-26 20:34:01 LOG4 got_cormsg: From DATATAKING: set dec 232301.9 2008-Apr-26 20:34:01 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-26 20:34:01 LOG4 got_cormsg: From DATATAKING: pnt tr 095203.4 232301.9 -CJ 2008-Apr-26 20:34:01 LOG4 got_cormsg: From DATATAKING: 095203.4 2008-Apr-26 20:34:01 LOG4 got_cormsg: From DATATAKING: vw% 232301.9 2008-Apr-26 20:34:01 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2008-Apr-26 20:34:01 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-26 20:34:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 20:34:06 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-26 20:34:06 LOG5 end_task: Level: (4) ID = <10251> Status = 0 0 0 0 ok 2008-Apr-26 20:34:06 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-26 20:34:06 LOG5 begin_task: Level: (4) ID = <10252> Status = 0 0 0 0 ok 2008-Apr-26 20:34:08 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-26 20:34:08 LOG5 end_task: Level: (4) ID = <10252> Status = 0 0 0 0 ok 2008-Apr-26 20:34:08 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-26 20:34:08 INFO2 waittrk: Now tracking AGES3193_p2_021 2008-Apr-26 20:34:08 LOG4 waittrk: Current telescope position: Az = 121.98 ZA = 9.80 2008-Apr-26 20:34:08 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-26 20:34:08 LOG5 finish_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2008-Apr-26 20:34:08 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-26 20:34:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 20:34:08 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-26 20:34:08 LOG5 end_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2008-Apr-26 20:34:08 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-26 20:34:08 LOG5 begin_task: Level: (3) ID = <10253> Status = 0 0 0 0 ok 2008-Apr-26 20:34:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-26 20:34:08 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-26 20:34:08 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-26 20:34:08 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-26 20:34:08 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 20:34:08 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-26 20:34:08 LOG5 begin_task: Level: (4) ID = <10254> Status = 0 0 0 0 ok 2008-Apr-26 20:34:09 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-26 20:34:09 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 20:34:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 20:34:10 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-26 20:34:10 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-26 20:34:10 LOG5 end_task: Level: (4) ID = <10254> Status = 0 0 0 0 ok 2008-Apr-26 20:34:10 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-26 20:34:10 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-26 20:34:10 LOG5 begin_task: Level: (4) ID = <10255> Status = 0 0 0 0 ok 2008-Apr-26 20:34:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-26 20:34:10 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-26 20:34:10 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-26 20:34:10 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-26 20:34:10 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-26 20:34:10 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-26 20:34:10 LOG5 begin_task: Level: (5) ID = <10256> Status = 0 0 0 0 ok 2008-Apr-26 20:34:10 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-26 20:34:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 20:34:10 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 1 dB --- beam 1: 7 6 dB 2008-Apr-26 20:34:10 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 6 dB 2008-Apr-26 20:34:10 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-26 20:34:11 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 2 3 dB 2008-Apr-26 20:34:11 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-26 20:34:11 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-26 20:34:11 LOG5 end_task: Level: (5) ID = <10256> Status = 0 0 0 0 ok 2008-Apr-26 20:34:11 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.871 1.025 ALFA beam 1: 1.093 1.052 2008-Apr-26 20:34:11 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.060 0.952 ALFA beam 3: 1.009 1.029 2008-Apr-26 20:34:11 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.922 0.941 ALFA beam 5: 0.991 0.901 2008-Apr-26 20:34:11 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.953 1.011 ALFA beam 7: 1.040 0.903 2008-Apr-26 20:34:11 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-26 20:34:11 LOG5 finish_task: Level: (4) ID = <10255> Status = 0 0 0 0 ok 2008-Apr-26 20:34:11 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-26 20:34:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 20:34:11 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-26 20:34:11 LOG5 end_task: Level: (4) ID = <10255> Status = 0 0 0 0 ok 2008-Apr-26 20:34:11 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-26 20:34:11 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-26 20:34:11 LOG5 finish_task: Level: (3) ID = <10253> Status = 0 0 0 0 ok 2008-Apr-26 20:34:11 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-26 20:34:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 20:34:11 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-26 20:34:11 LOG5 end_task: Level: (3) ID = <10253> Status = 0 0 0 0 ok 2008-Apr-26 20:34:11 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 SS 2008-Apr-26 20:34:11 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 SS 2008-Apr-26 20:34:11 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 SS 2008-Apr-26 20:34:11 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 SS 2008-Apr-26 20:34:11 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-26 20:34:11 START begin_task: Starting task 'WAPP calibration' 2008-Apr-26 20:34:11 LOG5 begin_task: Level: (3) ID = <10257> Status = 0 0 0 0 ok 2008-Apr-26 20:34:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-26 20:34:11 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-26 20:34:11 START begin_task: Starting task 'selecting calibration type' 2008-Apr-26 20:34:11 LOG5 begin_task: Level: (4) ID = <10258> Status = 0 0 0 0 ok 2008-Apr-26 20:34:11 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-26 20:34:11 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-26 20:34:11 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 20:34:11 START begin_task: Starting task 'waiting on setcal' 2008-Apr-26 20:34:11 LOG5 begin_task: Level: (5) ID = <10259> Status = 0 0 0 0 ok 2008-Apr-26 20:34:11 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 SS' 2008-Apr-26 20:34:11 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-26 20:34:11 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 20:34:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 20:34:11 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-26 20:34:11 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-26 20:34:11 LOG5 end_task: Level: (5) ID = <10259> Status = 0 0 0 0 ok 2008-Apr-26 20:34:11 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-26 20:34:11 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-26 20:34:11 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-26 20:34:11 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-26 20:34:11 LOG5 begin_task: Level: (5) ID = <10260> Status = 0 0 0 0 ok 2008-Apr-26 20:34:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 20:34:11 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-26 20:34:11 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-26 20:34:11 LOG5 end_task: Level: (5) ID = <10260> Status = 0 0 0 0 ok 2008-Apr-26 20:34:11 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-26 20:34:11 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-26 20:34:11 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-26 20:34:11 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-26 20:34:11 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-26 20:34:11 LOG5 begin_task: Level: (5) ID = <10261> Status = 0 0 0 0 ok 2008-Apr-26 20:34:11 NOTE WAPPDATA-new_file: New FITS file: wapp.20080426.a2048.0005.fits 2008-Apr-26 20:34:12 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-26 20:34:12 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-26 20:34:12 LOG5 end_task: Level: (5) ID = <10261> Status = 0 0 0 0 ok 2008-Apr-26 20:34:12 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-26 20:34:12 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-26 20:34:12 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-26 20:34:12 LOG5 finish_task: Level: (4) ID = <10258> Status = 0 0 0 0 ok 2008-Apr-26 20:34:12 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-26 20:34:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 20:34:12 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-26 20:34:12 LOG5 end_task: Level: (4) ID = <10258> Status = 0 0 0 0 ok 2008-Apr-26 20:34:12 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-26 20:34:12 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-26 20:34:12 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-26 20:34:12 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-26 20:34:12 LOG5 begin_task: Level: (4) ID = <10262> Status = 0 0 0 0 ok 2008-Apr-26 20:34:12 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080426.a2048.0005.fits} 2008-Apr-26 20:34:12 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-26 20:34:12 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-26 20:34:12 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-26 20:34:12 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-26 20:34:12 LOG5 end_task: Level: (4) ID = <10262> Status = 0 0 0 0 ok 2008-Apr-26 20:34:12 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-26 20:34:12 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-26 20:34:12 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-26 20:34:12 LOG5 begin_task: Level: (4) ID = <10263> Status = 0 0 0 0 ok 2008-Apr-26 20:34:12 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-26 20:34:12 LOG5 log_alfabeam: Parameters: 9.8676111111111098 23.383861111111109 10.477656 2008.3226750766853 76.199982 2008-Apr-26 20:34:12 LOG4 log_alfabeam: ALFABEAM 0 9.867611111111110 23.383861111111113 2008-Apr-26 20:34:12 LOG4 log_alfabeam: ALFABEAM 1 9.870020333839326 23.290749793957282 2008-Apr-26 20:34:12 LOG4 log_alfabeam: ALFABEAM 2 9.874955435055327 23.352650375232383 2008-Apr-26 20:34:12 LOG4 log_alfabeam: ALFABEAM 3 9.872601619265446 23.445895879593834 2008-Apr-26 20:34:12 LOG4 log_alfabeam: ALFABEAM 4 9.865261025118109 23.477613460137018 2008-Apr-26 20:34:12 LOG4 log_alfabeam: ALFABEAM 5 9.860250391720248 23.414571796115371 2008-Apr-26 20:34:12 LOG4 log_alfabeam: ALFABEAM 6 9.862656264750225 23.320952873419202 2008-Apr-26 20:34:12 INFO2 take_spectra: Starting WAPP scan: 811700466 2008-Apr-26 20:34:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-26 20:34:12 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-26 20:34:12 LOG5 begin_task: Level: (5) ID = <10264> Status = 0 0 0 0 ok 2008-Apr-26 20:34:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-26 20:34:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 2053.00 2008-Apr-26 20:34:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.114261 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-26 20:34:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.114261 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-26 20:34:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.114261 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-26 20:34:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.114261 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-26 20:34:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.114261 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-26 20:34:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.114261 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 20:34:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.114261 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 20:34:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.114261 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 20:34:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.114261 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 20:34:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-26 20:34:18 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-26 20:34:18 LOG5 end_task: Level: (5) ID = <10264> Status = 0 0 0 0 ok 2008-Apr-26 20:34:18 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-26 20:34:18 LOG5 end_task: Level: (4) ID = <10263> Status = 0 0 0 0 ok 2008-Apr-26 20:34:18 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-26 20:34:18 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-26 20:34:18 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-26 20:34:18 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-26 20:34:18 LOG5 begin_task: Level: (4) ID = <10265> Status = 0 0 0 0 ok 2008-Apr-26 20:34:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.489 > 1.4)! 2008-Apr-26 20:34:18 LOG4 check_wapp_levels: WAPP-1 power levels: 1.229 1.320 1.489 1.434 2008-Apr-26 20:34:18 LOG4 check_wapp_levels: WAPP-2 power levels: 1.433 1.315 1.390 1.421 2008-Apr-26 20:34:18 LOG4 check_wapp_levels: WAPP-3 power levels: 1.294 1.324 1.397 1.217 2008-Apr-26 20:34:18 LOG4 check_wapp_levels: WAPP-4 power levels: 1.366 1.423 1.487 1.271 2008-Apr-26 20:34:18 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-26 20:34:18 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-26 20:34:18 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-26 20:34:18 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-26 20:34:18 LOG5 end_task: Level: (4) ID = <10265> Status = 0 0 0 0 ok 2008-Apr-26 20:34:18 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-26 20:34:18 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-26 20:34:18 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-26 20:34:18 LOG5 begin_task: Level: (4) ID = <10266> Status = 0 0 0 0 ok 2008-Apr-26 20:34:18 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-26 20:34:18 LOG5 log_alfabeam: Parameters: 9.8676111111111098 23.383861111111109 10.479606 2008.322675298502 76.199982 2008-Apr-26 20:34:18 LOG4 log_alfabeam: ALFABEAM 0 9.867611111111113 23.383861111111113 2008-Apr-26 20:34:18 LOG4 log_alfabeam: ALFABEAM 1 9.870030465754658 23.290799212856349 2008-Apr-26 20:34:18 LOG4 log_alfabeam: ALFABEAM 2 9.874958870711531 23.352803689135143 2008-Apr-26 20:34:18 LOG4 log_alfabeam: ALFABEAM 3 9.872594767942818 23.446000636327721 2008-Apr-26 20:34:18 LOG4 log_alfabeam: ALFABEAM 4 9.865250656886374 23.477563682941597 2008-Apr-26 20:34:18 LOG4 log_alfabeam: ALFABEAM 5 9.860247049379945 23.414419174197246 2008-Apr-26 20:34:18 LOG4 log_alfabeam: ALFABEAM 6 9.862663133461187 23.320850903329688 2008-Apr-26 20:34:18 INFO2 take_spectra: Starting WAPP scan: 811700467 2008-Apr-26 20:34:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-26 20:34:19 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-26 20:34:19 LOG5 begin_task: Level: (5) ID = <10267> Status = 0 0 0 0 ok 2008-Apr-26 20:34:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-26 20:34:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 2060.00 2008-Apr-26 20:34:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.114261 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-26 20:34:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.114261 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-26 20:34:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.114261 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-26 20:34:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.114261 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-26 20:34:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.114261 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-26 20:34:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.114261 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 20:34:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.114261 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 20:34:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.114261 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 20:34:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.114261 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 20:34:25 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-26 20:34:25 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-26 20:34:25 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-26 20:34:25 LOG5 end_task: Level: (5) ID = <10267> Status = 0 0 0 0 ok 2008-Apr-26 20:34:25 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-26 20:34:25 LOG5 end_task: Level: (4) ID = <10266> Status = 0 0 0 0 ok 2008-Apr-26 20:34:25 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-26 20:34:25 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-26 20:34:25 LOG5 finish_task: Level: (3) ID = <10257> Status = 0 0 0 0 ok 2008-Apr-26 20:34:25 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-26 20:34:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 20:34:25 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-26 20:34:25 LOG5 end_task: Level: (3) ID = <10257> Status = 0 0 0 0 ok 2008-Apr-26 20:34:25 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-26 20:34:25 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 122.23 and ZA = 9.78 2008-Apr-26 20:34:25 LOG3 track_source: Calling 'track_source AGES3193_p2_021 122.23 9.7758214154 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-26 20:34:25 START begin_task: Starting task 'sending tracking commands' 2008-Apr-26 20:34:25 LOG5 begin_task: Level: (3) ID = <10268> Status = 0 0 0 0 ok 2008-Apr-26 20:34:25 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_021} INFO {Slewing to source 'AGES3193_p2_021' ...} 2008-Apr-26 20:34:25 INFO1 track_source: Starting to track AGES3193_p2_021 2008-Apr-26 20:34:25 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_021" 2008-Apr-26 20:34:25 LOG3 vw_send: To DATATAKING: set ra 122.23 2008-Apr-26 20:34:25 LOG3 vw_send: To DATATAKING: set dec 9.7758214154 2008-Apr-26 20:34:25 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-26 20:34:25 LOG3 vw_send: To DATATAKING: pnt tr 122.23 9.7758214154 -CF 2008-Apr-26 20:34:25 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-26 20:34:25 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-26 20:34:25 LOG5 finish_task: Level: (3) ID = <10268> Status = 0 0 0 0 ok 2008-Apr-26 20:34:25 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-26 20:34:26 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 20:34:26 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-26 20:34:26 LOG5 end_task: Level: (3) ID = <10268> Status = 0 0 0 0 ok 2008-Apr-26 20:34:26 LOG1 fixed_driftmap: Parameters: HA = +00:36:00.0 Start = 10:29:29.4 LST = 10:28:53.6 diff = 35.8 secs 2008-Apr-26 20:34:26 INFO2 fixed_driftmap: Waiting 33.8 seconds for RA 9:53:29 2008-Apr-26 20:34:26 INFO2 lstwait: Waiting for 33.7 secs from LST 10:28:54 to LST 10:29:27 ... 2008-Apr-26 20:34:26 LOG4 send_obs_status: To obs_status: <1> TASKTIME 33.688682621385077 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-26 20:34:26 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-26 20:34:26 LOG5 begin_task: Level: (3) ID = <10269> Status = 0 0 0 0 ok 2008-Apr-26 20:34:26 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_021" 2008-Apr-26 20:34:26 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 1.489 (still bad) 2008-Apr-26 20:34:26 LOG4 got_cormsg: From DATATAKING: set ra 122.23 2008-Apr-26 20:34:26 LOG4 got_cormsg: From DATATAKING: set dec 9.7758214154 2008-Apr-26 20:34:26 LOG4 got_cormsg: From DATATAKING: vw% 122.23 2008-Apr-26 20:34:26 LOG4 got_cormsg: From DATATAKING: vw% 9.7758214154 2008-Apr-26 20:34:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 20:34:26 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-26 20:34:26 LOG4 got_cormsg: From DATATAKING: pnt tr 122.23 9.7758214154 -CF 2008-Apr-26 20:34:26 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-26 20:34:26 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-26 20:34:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 20:34:59 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-26 20:34:59 LOG5 end_task: Level: (3) ID = <10269> Status = 0 0 0 0 ok 2008-Apr-26 20:34:59 LOG4 lstwait: Finished waiting, the gui caused difference: 0.31468195999693194 2008-Apr-26 20:34:59 INFO3 lstwait: Finished waiting 2008-Apr-26 20:34:59 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-26 20:34:59 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-26 20:34:59 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-26 20:34:59 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-26 20:34:59 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-26 20:34:59 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-26 20:34:59 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-26 20:34:59 LOG5 begin_task: Level: (3) ID = <10270> Status = 0 0 0 0 ok 2008-Apr-26 20:34:59 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-26 20:35:00 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-26 20:35:00 INFO2 take_spectra: Starting WAPP scan: 811700468 2008-Apr-26 20:35:00 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-26 20:35:00 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-26 20:35:00 LOG5 begin_task: Level: (4) ID = <10271> Status = 0 0 0 0 ok 2008-Apr-26 20:35:00 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-26 20:35:00 INFO1 WAPP=1+2+3+4-start_spectra: start sec 2101.00 2008-Apr-26 20:35:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.114261 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-26 20:35:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.114261 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-26 20:35:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.114261 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-26 20:35:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.114261 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-26 20:35:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.114261 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-26 20:35:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.114261 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 20:35:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.114261 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 20:35:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.114261 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 20:35:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.114261 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 20:35:02 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.887 and 1.094 2008-Apr-26 20:35:18 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 20:35:18.294 (seconds: 74118.294)!} 2008-Apr-26 20:35:18 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 20:35:18.294 (seconds: 74118.294)! 2008-Apr-26 20:35:19 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 74117.0 to 74118.0! 2008-Apr-26 20:35:20 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (74117.0 - 74119.0)! 2008-Apr-26 20:55:01 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-26 20:55:01 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-26 20:55:01 LOG5 end_task: Level: (4) ID = <10271> Status = 0 0 0 0 ok 2008-Apr-26 20:55:01 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-26 20:55:01 LOG5 end_task: Level: (3) ID = <10270> Status = 0 0 0 0 ok 2008-Apr-26 20:55:01 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-26 20:55:01 LOG5 finish_task: Level: (2) ID = <10237> Status = 0 0 0 0 ok 2008-Apr-26 20:55:01 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-26 20:55:01 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-26 20:55:01 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-26 20:55:01 LOG5 end_task: Level: (2) ID = <10237> Status = 0 0 0 0 ok 2008-Apr-26 20:55:01 COMMAND run_command_line: EXECUTING command 27: 'FIXEDDRIFT az=112.25 alfaangle=-90.5 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_023 ra=95300.00 dec=232000.00' 2008-Apr-26 20:55:01 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-26 20:55:02 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-26 20:55:02 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 112.25 -90.5 hcorcal 5 tracking no first 1 AGES3193_p2_023 95300.00 232000.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-26 20:55:02 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-26 20:55:02 LOG5 begin_task: Level: (2) ID = <10272> Status = 0 0 0 0 ok 2008-Apr-26 20:55:02 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES3193_p2_021' 2008-Apr-26 20:55:02 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-26 20:55:02 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p2_023} 2008-Apr-26 20:55:02 INFO3 fixed_driftmap: Sending telescope to Az = 112.25 and ZA = 14.63 2008-Apr-26 20:55:02 LOG3 track_source: Calling 'track_source AGES3193_p2_023 112.25 14.6323588608 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-26 20:55:02 START begin_task: Starting task 'sending tracking commands' 2008-Apr-26 20:55:02 LOG5 begin_task: Level: (3) ID = <10273> Status = 0 0 0 0 ok 2008-Apr-26 20:55:02 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_023} INFO {Slewing to source 'AGES3193_p2_023' ...} 2008-Apr-26 20:55:02 INFO1 track_source: Starting to track AGES3193_p2_023 2008-Apr-26 20:55:02 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_023" 2008-Apr-26 20:55:02 LOG3 vw_send: To DATATAKING: set ra 112.25 2008-Apr-26 20:55:02 LOG3 vw_send: To DATATAKING: set dec 14.6323588608 2008-Apr-26 20:55:02 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-26 20:55:02 LOG3 vw_send: To DATATAKING: pnt tr 112.25 14.6323588608 -CF 2008-Apr-26 20:55:02 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-26 20:55:02 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-26 20:55:02 LOG5 finish_task: Level: (3) ID = <10273> Status = 0 0 0 0 ok 2008-Apr-26 20:55:02 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-26 20:55:02 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 20:55:02 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-26 20:55:02 LOG5 end_task: Level: (3) ID = <10273> Status = 0 0 0 0 ok 2008-Apr-26 20:55:02 START begin_task: Starting task 'rotate ALFA to -90.5 degrees' 2008-Apr-26 20:55:02 LOG5 begin_task: Level: (3) ID = <10274> Status = 0 0 0 0 ok 2008-Apr-26 20:55:02 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -90.5 degrees ...} 2008-Apr-26 20:55:02 INFO2 rotate_alfa: ALFA commanded to -90.5 degrees 2008-Apr-26 20:55:02 LOG3 sock_errsend: To ALFAMOTOR: POSITION -90.5 REPLY 2008-Apr-26 20:55:02 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-26 20:55:02 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-26 20:55:02 LOG5 begin_task: Level: (4) ID = <10275> Status = 0 0 0 0 ok 2008-Apr-26 20:55:02 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_023" 2008-Apr-26 20:55:02 LOG4 got_cormsg: From DATATAKING: set ra 112.25 2008-Apr-26 20:55:02 LOG4 got_cormsg: From DATATAKING: set dec 14.6323588608 2008-Apr-26 20:55:02 LOG4 got_cormsg: From DATATAKING: vw% 112.25 2008-Apr-26 20:55:02 LOG4 got_cormsg: From DATATAKING: vw% 14.6323588608 2008-Apr-26 20:55:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 20:55:02 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-26 20:55:02 LOG4 got_cormsg: From DATATAKING: pnt tr 112.25 14.6323588608 -CF 2008-Apr-26 20:55:02 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-26 20:55:02 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-26 20:55:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 20:56:35 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-26 20:56:35 INFO3 alfa_motor: ALFA rotator in-position -90.50 degrees 2008-Apr-26 20:56:35 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-26 20:56:35 LOG5 end_task: Level: (4) ID = <10275> Status = 0 0 0 0 ok 2008-Apr-26 20:56:35 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-26 20:56:35 STOP finish_task: Finishing task 'rotate ALFA to -90.5 degrees' 2008-Apr-26 20:56:35 LOG5 finish_task: Level: (3) ID = <10274> Status = 0 0 0 0 ok 2008-Apr-26 20:56:35 INFO2 finish_task: DONE finished configuration: rotating ALFA to -90.5 degrees 2008-Apr-26 20:56:35 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 20:56:35 STOP end_task: Finishing task 'rotate ALFA to -90.5 degrees' with status 'OK' 2008-Apr-26 20:56:35 LOG5 end_task: Level: (3) ID = <10274> Status = 0 0 0 0 ok 2008-Apr-26 20:56:35 START begin_task: Starting task 'waiting on telescope' 2008-Apr-26 20:56:35 LOG5 begin_task: Level: (3) ID = <10276> Status = 0 0 0 0 ok 2008-Apr-26 20:56:35 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-26 20:56:35 LOG3 waittrk: Start waittrk 5 2008-Apr-26 20:56:35 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-26 20:56:35 LOG5 begin_task: Level: (4) ID = <10277> Status = 0 0 0 0 ok 2008-Apr-26 20:56:40 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-26 20:56:40 LOG5 end_task: Level: (4) ID = <10277> Status = 0 0 0 0 ok 2008-Apr-26 20:56:40 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-26 20:56:40 LOG5 begin_task: Level: (4) ID = <10278> Status = 0 0 0 0 ok 2008-Apr-26 20:57:07 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-26 20:57:07 LOG5 end_task: Level: (4) ID = <10278> Status = 0 0 0 0 ok 2008-Apr-26 20:57:07 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-26 20:57:07 INFO2 waittrk: Now tracking AGES3193_p2_023 2008-Apr-26 20:57:07 LOG4 waittrk: Current telescope position: Az = 112.01 ZA = 14.64 2008-Apr-26 20:57:07 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-26 20:57:07 LOG5 finish_task: Level: (3) ID = <10276> Status = 0 0 0 0 ok 2008-Apr-26 20:57:07 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-26 20:57:07 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 20:57:08 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-26 20:57:08 LOG5 end_task: Level: (3) ID = <10276> Status = 0 0 0 0 ok 2008-Apr-26 20:57:08 START begin_task: Starting task 'selecting calibration type' 2008-Apr-26 20:57:08 LOG5 begin_task: Level: (3) ID = <10279> Status = 0 0 0 0 ok 2008-Apr-26 20:57:08 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-26 20:57:08 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-26 20:57:08 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 20:57:08 START begin_task: Starting task 'waiting on setcal' 2008-Apr-26 20:57:08 LOG5 begin_task: Level: (4) ID = <10280> Status = 0 0 0 0 ok 2008-Apr-26 20:57:08 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-26 20:57:08 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 20:57:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 20:57:08 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-26 20:57:08 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-26 20:57:08 LOG5 end_task: Level: (4) ID = <10280> Status = 0 0 0 0 ok 2008-Apr-26 20:57:08 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-26 20:57:08 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-26 20:57:08 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-26 20:57:08 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-26 20:57:08 LOG5 begin_task: Level: (4) ID = <10281> Status = 0 0 0 0 ok 2008-Apr-26 20:57:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 20:57:09 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-26 20:57:09 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-26 20:57:09 LOG5 end_task: Level: (4) ID = <10281> Status = 0 0 0 0 ok 2008-Apr-26 20:57:09 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-26 20:57:09 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-26 20:57:09 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-26 20:57:09 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-26 20:57:09 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-26 20:57:09 LOG5 begin_task: Level: (4) ID = <10282> Status = 0 0 0 0 ok 2008-Apr-26 20:57:09 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-26 20:57:09 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-26 20:57:09 LOG5 end_task: Level: (4) ID = <10282> Status = 0 0 0 0 ok 2008-Apr-26 20:57:09 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-26 20:57:09 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-26 20:57:09 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-26 20:57:09 LOG5 finish_task: Level: (3) ID = <10279> Status = 0 0 0 0 ok 2008-Apr-26 20:57:09 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-26 20:57:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 20:57:09 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-26 20:57:09 LOG5 end_task: Level: (3) ID = <10279> Status = 0 0 0 0 ok 2008-Apr-26 20:57:09 LOG5 dopset_later: Calling 'dopset_later 48.229555003214656' 2008-Apr-26 20:57:09 INFO3 dopset_later: Setting Doppler correction for 20:57:56 (48.2 seconds from now) 2008-Apr-26 20:57:09 LOG5 antvel: Calling 'antvel 112.250000 14.632359 F 48.229555003214656' 2008-Apr-26 20:57:09 LOG2 antvel: Parameters to Doppler: Heliocentric 89876 2008 117 0.0 2008-Apr-26 20:57:09 INFO5 antvel: Computed antenna velocity: +28.08131 km/s 2008-Apr-26 20:57:09 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=28.081305624100001 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-26 20:57:09 INFO4 dopset_gen: New sky frequencies: 1381.114061 1381.114061 1381.114061 1381.114061 1381.114061 1381.114061 1381.114061 1381.114061 1381.114061 2008-Apr-26 20:57:09 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.114061 sky0=1381.114061 sky1=1381.114061 sky2=1381.114061 sky3=1381.114061 sky4=1381.114061 sky5=1381.114061 sky6=1381.114061 sky7=1381.114061 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-26 20:57:09 LOG2 dopset_gen: Result from 'sky2syn': 1631.114061 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-26 20:57:09 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631114061.0} 2008-Apr-26 20:57:09 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 20:57:09 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-26 20:57:09 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-26 20:57:09 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:15.9 Dec = +23:20:02.0 2008-Apr-26 20:57:09 LOG3 track_source: Calling 'track_source AGES3193_p2_023 095215.9 232002.0 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-26 20:57:09 START begin_task: Starting task 'sending tracking commands' 2008-Apr-26 20:57:09 LOG5 begin_task: Level: (3) ID = <10283> Status = 0 0 0 0 ok 2008-Apr-26 20:57:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_023} INFO {Slewing to source 'AGES3193_p2_023' ...} 2008-Apr-26 20:57:09 INFO1 track_source: Starting to track AGES3193_p2_023 2008-Apr-26 20:57:09 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_023" 2008-Apr-26 20:57:09 LOG3 vw_send: To DATATAKING: set ra 095215.9 2008-Apr-26 20:57:09 LOG3 vw_send: To DATATAKING: set dec 232002.0 2008-Apr-26 20:57:09 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-26 20:57:09 LOG3 vw_send: To DATATAKING: pnt tr 095215.9 232002.0 -CJ 2008-Apr-26 20:57:09 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-26 20:57:09 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-26 20:57:09 LOG5 finish_task: Level: (3) ID = <10283> Status = 0 0 0 0 ok 2008-Apr-26 20:57:09 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-26 20:57:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 20:57:09 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-26 20:57:09 LOG5 end_task: Level: (3) ID = <10283> Status = 0 0 0 0 ok 2008-Apr-26 20:57:09 START begin_task: Starting task 'waiting on telescope' 2008-Apr-26 20:57:09 LOG5 begin_task: Level: (3) ID = <10284> Status = 0 0 0 0 ok 2008-Apr-26 20:57:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-26 20:57:09 LOG3 waittrk: Start waittrk 5 2008-Apr-26 20:57:09 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-26 20:57:09 LOG5 begin_task: Level: (4) ID = <10285> Status = 0 0 0 0 ok 2008-Apr-26 20:57:09 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631114061.0} 2008-Apr-26 20:57:09 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 20:57:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 20:57:09 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_023" 2008-Apr-26 20:57:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 20:57:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 20:57:09 LOG4 got_cormsg: From DATATAKING: set ra 095215.9 2008-Apr-26 20:57:09 LOG4 got_cormsg: From DATATAKING: set dec 232002.0 2008-Apr-26 20:57:09 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-26 20:57:09 LOG4 got_cormsg: From DATATAKING: pnt tr 095215.9 232002.0 -CJ 2008-Apr-26 20:57:09 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-26 20:57:09 LOG4 got_cormsg: From DATATAKING: 095215.9 2008-Apr-26 20:57:09 LOG4 got_cormsg: From DATATAKING: vw% 232002.0 2008-Apr-26 20:57:09 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2008-Apr-26 20:57:14 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-26 20:57:14 LOG5 end_task: Level: (4) ID = <10285> Status = 0 0 0 0 ok 2008-Apr-26 20:57:14 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-26 20:57:14 LOG5 begin_task: Level: (4) ID = <10286> Status = 0 0 0 0 ok 2008-Apr-26 20:57:16 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-26 20:57:16 LOG5 end_task: Level: (4) ID = <10286> Status = 0 0 0 0 ok 2008-Apr-26 20:57:16 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-26 20:57:16 INFO2 waittrk: Now tracking AGES3193_p2_023 2008-Apr-26 20:57:16 LOG4 waittrk: Current telescope position: Az = 111.99 ZA = 14.66 2008-Apr-26 20:57:16 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-26 20:57:16 LOG5 finish_task: Level: (3) ID = <10284> Status = 0 0 0 0 ok 2008-Apr-26 20:57:16 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-26 20:57:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 20:57:16 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-26 20:57:16 LOG5 end_task: Level: (3) ID = <10284> Status = 0 0 0 0 ok 2008-Apr-26 20:57:16 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-26 20:57:16 LOG5 begin_task: Level: (3) ID = <10287> Status = 0 0 0 0 ok 2008-Apr-26 20:57:16 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-26 20:57:16 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-26 20:57:17 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-26 20:57:17 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-26 20:57:17 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 20:57:17 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-26 20:57:17 LOG5 begin_task: Level: (4) ID = <10288> Status = 0 0 0 0 ok 2008-Apr-26 20:57:17 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-26 20:57:17 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 20:57:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 20:57:19 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-26 20:57:19 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-26 20:57:19 LOG5 end_task: Level: (4) ID = <10288> Status = 0 0 0 0 ok 2008-Apr-26 20:57:19 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-26 20:57:19 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-26 20:57:19 LOG5 begin_task: Level: (4) ID = <10289> Status = 0 0 0 0 ok 2008-Apr-26 20:57:19 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-26 20:57:20 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-26 20:57:20 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-26 20:57:20 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-26 20:57:20 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-26 20:57:20 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-26 20:57:20 LOG5 begin_task: Level: (5) ID = <10290> Status = 0 0 0 0 ok 2008-Apr-26 20:57:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 20:57:20 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-26 20:57:20 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 1 dB --- beam 1: 8 6 dB 2008-Apr-26 20:57:20 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-26 20:57:20 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 6 dB 2008-Apr-26 20:57:20 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 3 3 dB 2008-Apr-26 20:57:20 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-26 20:57:20 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-26 20:57:20 LOG5 end_task: Level: (5) ID = <10290> Status = 0 0 0 0 ok 2008-Apr-26 20:57:20 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.923 1.038 ALFA beam 1: 0.873 1.025 2008-Apr-26 20:57:20 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.053 0.959 ALFA beam 3: 1.000 1.068 2008-Apr-26 20:57:20 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.960 1.029 ALFA beam 5: 1.108 0.997 2008-Apr-26 20:57:20 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.035 1.020 ALFA beam 7: 0.901 0.911 2008-Apr-26 20:57:20 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-26 20:57:20 LOG5 finish_task: Level: (4) ID = <10289> Status = 0 0 0 0 ok 2008-Apr-26 20:57:20 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-26 20:57:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 20:57:20 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-26 20:57:20 LOG5 end_task: Level: (4) ID = <10289> Status = 0 0 0 0 ok 2008-Apr-26 20:57:20 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-26 20:57:20 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-26 20:57:20 LOG5 finish_task: Level: (3) ID = <10287> Status = 0 0 0 0 ok 2008-Apr-26 20:57:20 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-26 20:57:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 20:57:20 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-26 20:57:20 LOG5 end_task: Level: (3) ID = <10287> Status = 0 0 0 0 ok 2008-Apr-26 20:57:20 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 SS 2008-Apr-26 20:57:20 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 SS 2008-Apr-26 20:57:20 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 SS 2008-Apr-26 20:57:20 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 SS 2008-Apr-26 20:57:20 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-26 20:57:20 START begin_task: Starting task 'WAPP calibration' 2008-Apr-26 20:57:20 LOG5 begin_task: Level: (3) ID = <10291> Status = 0 0 0 0 ok 2008-Apr-26 20:57:20 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-26 20:57:20 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-26 20:57:21 START begin_task: Starting task 'selecting calibration type' 2008-Apr-26 20:57:21 LOG5 begin_task: Level: (4) ID = <10292> Status = 0 0 0 0 ok 2008-Apr-26 20:57:21 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-26 20:57:21 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-26 20:57:21 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 20:57:21 START begin_task: Starting task 'waiting on setcal' 2008-Apr-26 20:57:21 LOG5 begin_task: Level: (5) ID = <10293> Status = 0 0 0 0 ok 2008-Apr-26 20:57:21 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 SS' 2008-Apr-26 20:57:21 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-26 20:57:21 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 20:57:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 20:57:21 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-26 20:57:21 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-26 20:57:21 LOG5 end_task: Level: (5) ID = <10293> Status = 0 0 0 0 ok 2008-Apr-26 20:57:21 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-26 20:57:21 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-26 20:57:21 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-26 20:57:21 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-26 20:57:21 LOG5 begin_task: Level: (5) ID = <10294> Status = 0 0 0 0 ok 2008-Apr-26 20:57:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 20:57:21 NOTE WAPPDATA-new_file: New FITS file: wapp.20080426.a2048.0006.fits 2008-Apr-26 20:57:21 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080426.a2048.0006.fits} 2008-Apr-26 20:57:21 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-26 20:57:21 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-26 20:57:21 LOG5 end_task: Level: (5) ID = <10294> Status = 0 0 0 0 ok 2008-Apr-26 20:57:21 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-26 20:57:21 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-26 20:57:21 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-26 20:57:21 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-26 20:57:21 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-26 20:57:21 LOG5 begin_task: Level: (5) ID = <10295> Status = 0 0 0 0 ok 2008-Apr-26 20:57:21 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-26 20:57:21 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-26 20:57:21 LOG5 end_task: Level: (5) ID = <10295> Status = 0 0 0 0 ok 2008-Apr-26 20:57:21 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-26 20:57:21 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-26 20:57:21 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-26 20:57:21 LOG5 finish_task: Level: (4) ID = <10292> Status = 0 0 0 0 ok 2008-Apr-26 20:57:21 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-26 20:57:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 20:57:21 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-26 20:57:21 LOG5 end_task: Level: (4) ID = <10292> Status = 0 0 0 0 ok 2008-Apr-26 20:57:21 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-26 20:57:21 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-26 20:57:21 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-26 20:57:21 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-26 20:57:21 LOG5 begin_task: Level: (4) ID = <10296> Status = 0 0 0 0 ok 2008-Apr-26 20:57:22 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-26 20:57:22 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-26 20:57:22 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-26 20:57:22 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-26 20:57:22 LOG5 end_task: Level: (4) ID = <10296> Status = 0 0 0 0 ok 2008-Apr-26 20:57:22 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-26 20:57:22 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-26 20:57:22 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-26 20:57:22 LOG5 begin_task: Level: (4) ID = <10297> Status = 0 0 0 0 ok 2008-Apr-26 20:57:22 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-26 20:57:22 LOG5 log_alfabeam: Parameters: 9.871083333333333 23.333888888888886 10.864824 2008.3227191231274 -90.500023 2008-Apr-26 20:57:22 LOG4 log_alfabeam: ALFABEAM 0 9.871083333333335 23.333888888888897 2008-Apr-26 20:57:22 LOG4 log_alfabeam: ALFABEAM 1 9.869002648812609 23.425187248173724 2008-Apr-26 20:57:22 LOG4 log_alfabeam: ALFABEAM 2 9.863654480799909 23.364072673342111 2008-Apr-26 20:57:22 LOG4 log_alfabeam: ALFABEAM 3 9.865767233684869 23.272679524971259 2008-Apr-26 20:57:22 LOG4 log_alfabeam: ALFABEAM 4 9.873201864519560 23.243008115296323 2008-Apr-26 20:57:22 LOG4 log_alfabeam: ALFABEAM 5 9.878508568883792 23.303615453420349 2008-Apr-26 20:57:22 LOG4 log_alfabeam: ALFABEAM 6 9.876421876493829 23.394401915912624 2008-Apr-26 20:57:22 INFO2 take_spectra: Starting WAPP scan: 811700469 2008-Apr-26 20:57:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-26 20:57:22 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-26 20:57:22 LOG5 begin_task: Level: (5) ID = <10298> Status = 0 0 0 0 ok 2008-Apr-26 20:57:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-26 20:57:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3443.00 2008-Apr-26 20:57:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.114061 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-26 20:57:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.114061 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-26 20:57:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.114061 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-26 20:57:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.457 > 1.4)! 2008-Apr-26 20:57:28 LOG4 check_wapp_levels: WAPP-1 power levels: 0.923 1.038 0.873 1.025 2008-Apr-26 20:57:28 LOG4 check_wapp_levels: WAPP-2 power levels: 1.428 1.324 1.385 1.457 2008-Apr-26 20:57:28 LOG4 check_wapp_levels: WAPP-3 power levels: 0.960 1.029 1.108 0.997 2008-Apr-26 20:57:28 LOG4 check_wapp_levels: WAPP-4 power levels: 1.035 1.020 0.901 0.911 2008-Apr-26 20:57:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.114061 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-26 20:57:28 LOG3 WAPP=1+3+4-save_rfcalc: Channel 4: Sky freq = 1381.114061 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-26 20:57:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.114061 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 20:57:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.114061 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 20:57:28 LOG3 WAPP=1+3+4-save_rfcalc: Channel 7: Sky freq = 1381.114061 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 20:57:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.114061 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 20:57:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-26 20:57:28 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-26 20:57:28 LOG5 end_task: Level: (5) ID = <10298> Status = 0 0 0 0 ok 2008-Apr-26 20:57:28 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-26 20:57:28 LOG5 end_task: Level: (4) ID = <10297> Status = 0 0 0 0 ok 2008-Apr-26 20:57:28 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-26 20:57:28 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-26 20:57:28 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-26 20:57:28 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-26 20:57:28 LOG5 begin_task: Level: (4) ID = <10299> Status = 0 0 0 0 ok 2008-Apr-26 20:57:28 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-26 20:57:28 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-26 20:57:28 LOG3 WAPP=2-save_rfcalc: Channel 4: Sky freq = 1381.114061 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-26 20:57:28 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-26 20:57:28 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-26 20:57:28 LOG5 end_task: Level: (4) ID = <10299> Status = 0 0 0 0 ok 2008-Apr-26 20:57:28 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-26 20:57:28 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-26 20:57:28 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-26 20:57:28 LOG5 begin_task: Level: (4) ID = <10300> Status = 0 0 0 0 ok 2008-Apr-26 20:57:28 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-26 20:57:28 LOG5 log_alfabeam: Parameters: 9.871083333333333 23.333888888888886 10.866774 2008.3227193449441 -90.500023 2008-Apr-26 20:57:28 LOG4 log_alfabeam: ALFABEAM 0 9.871083333333335 23.333888888888893 2008-Apr-26 20:57:28 LOG4 log_alfabeam: ALFABEAM 1 9.868997822553379 23.425166146096849 2008-Apr-26 20:57:28 LOG4 log_alfabeam: ALFABEAM 2 9.863652902289394 23.363998795702059 2008-Apr-26 20:57:28 LOG4 log_alfabeam: ALFABEAM 3 9.865770427205415 23.272627271129828 2008-Apr-26 20:57:28 LOG4 log_alfabeam: ALFABEAM 4 9.873206588241993 23.243028817923282 2008-Apr-26 20:57:28 LOG4 log_alfabeam: ALFABEAM 5 9.878510155937764 23.303689315005446 2008-Apr-26 20:57:28 LOG4 log_alfabeam: ALFABEAM 6 9.876418686500610 23.394455591771564 2008-Apr-26 20:57:28 INFO2 take_spectra: Starting WAPP scan: 811700470 2008-Apr-26 20:57:29 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-26 20:57:29 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-26 20:57:29 LOG5 begin_task: Level: (5) ID = <10301> Status = 0 0 0 0 ok 2008-Apr-26 20:57:29 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-26 20:57:29 LOG3 WAPP=2-save_rfcalc: Channel 7: Sky freq = 1381.114061 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 20:57:29 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3450.00 2008-Apr-26 20:57:34 INFO5 check_wapp_levels: WAPP power levels are between 1.185 and 1.509 (still bad) 2008-Apr-26 20:57:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.114061 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-26 20:57:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.114061 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-26 20:57:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.114061 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-26 20:57:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.114061 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-26 20:57:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.114061 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-26 20:57:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.114061 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 20:57:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.114061 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 20:57:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.114061 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 20:57:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.114061 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 20:57:35 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-26 20:57:35 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-26 20:57:35 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-26 20:57:35 LOG5 end_task: Level: (5) ID = <10301> Status = 0 0 0 0 ok 2008-Apr-26 20:57:35 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-26 20:57:35 LOG5 end_task: Level: (4) ID = <10300> Status = 0 0 0 0 ok 2008-Apr-26 20:57:35 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-26 20:57:35 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-26 20:57:35 LOG5 finish_task: Level: (3) ID = <10291> Status = 0 0 0 0 ok 2008-Apr-26 20:57:35 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-26 20:57:35 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 20:57:35 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-26 20:57:35 LOG5 end_task: Level: (3) ID = <10291> Status = 0 0 0 0 ok 2008-Apr-26 20:57:35 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-26 20:57:35 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 112.25 and ZA = 14.63 2008-Apr-26 20:57:35 LOG3 track_source: Calling 'track_source AGES3193_p2_023 112.25 14.6323588608 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-26 20:57:35 START begin_task: Starting task 'sending tracking commands' 2008-Apr-26 20:57:35 LOG5 begin_task: Level: (3) ID = <10302> Status = 0 0 0 0 ok 2008-Apr-26 20:57:35 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_023} INFO {Slewing to source 'AGES3193_p2_023' ...} 2008-Apr-26 20:57:35 INFO1 track_source: Starting to track AGES3193_p2_023 2008-Apr-26 20:57:35 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_023" 2008-Apr-26 20:57:35 LOG3 vw_send: To DATATAKING: set ra 112.25 2008-Apr-26 20:57:35 LOG3 vw_send: To DATATAKING: set dec 14.6323588608 2008-Apr-26 20:57:35 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-26 20:57:35 LOG3 vw_send: To DATATAKING: pnt tr 112.25 14.6323588608 -CF 2008-Apr-26 20:57:35 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-26 20:57:35 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-26 20:57:35 LOG5 finish_task: Level: (3) ID = <10302> Status = 0 0 0 0 ok 2008-Apr-26 20:57:35 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-26 20:57:35 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 20:57:36 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-26 20:57:36 LOG5 end_task: Level: (3) ID = <10302> Status = 0 0 0 0 ok 2008-Apr-26 20:57:36 LOG1 fixed_driftmap: Parameters: HA = +00:58:59.4 Start = 10:52:28.7 LST = 10:52:07.4 diff = 21.3 secs 2008-Apr-26 20:57:36 INFO2 fixed_driftmap: Waiting 19.3 seconds for RA 9:53:29 2008-Apr-26 20:57:36 INFO2 lstwait: Waiting for 19.2 secs from LST 10:52:07 to LST 10:52:27 ... 2008-Apr-26 20:57:36 LOG4 send_obs_status: To obs_status: <1> TASKTIME 19.233343021452356 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-26 20:57:36 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-26 20:57:36 LOG5 begin_task: Level: (3) ID = <10303> Status = 0 0 0 0 ok 2008-Apr-26 20:57:36 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_023" 2008-Apr-26 20:57:36 LOG4 got_cormsg: From DATATAKING: set ra 112.25 2008-Apr-26 20:57:36 LOG4 got_cormsg: From DATATAKING: set dec 14.6323588608 2008-Apr-26 20:57:36 LOG4 got_cormsg: From DATATAKING: vw% 112.25 2008-Apr-26 20:57:36 LOG4 got_cormsg: From DATATAKING: vw% 14.6323588608 2008-Apr-26 20:57:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 20:57:36 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-26 20:57:36 LOG4 got_cormsg: From DATATAKING: pnt tr 112.25 14.6323588608 -CF 2008-Apr-26 20:57:36 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-26 20:57:36 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-26 20:57:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 20:57:40 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.877 and 1.108 2008-Apr-26 20:57:55 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-26 20:57:55 LOG5 end_task: Level: (3) ID = <10303> Status = 0 0 0 0 ok 2008-Apr-26 20:57:55 LOG4 lstwait: Finished waiting, the gui caused difference: 0.76599847999929693 2008-Apr-26 20:57:55 INFO3 lstwait: Finished waiting 2008-Apr-26 20:57:55 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-26 20:57:55 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-26 20:57:55 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-26 20:57:55 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-26 20:57:55 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-26 20:57:55 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-26 20:57:55 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-26 20:57:55 LOG5 begin_task: Level: (3) ID = <10304> Status = 0 0 0 0 ok 2008-Apr-26 20:57:55 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-26 20:57:55 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-26 20:57:55 INFO2 take_spectra: Starting WAPP scan: 811700471 2008-Apr-26 20:57:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-26 20:57:56 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-26 20:57:56 LOG5 begin_task: Level: (4) ID = <10305> Status = 0 0 0 0 ok 2008-Apr-26 20:57:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-26 20:57:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3477.00 2008-Apr-26 20:57:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.114061 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-26 20:57:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.114061 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-26 20:57:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.114061 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-26 20:57:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.114061 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-26 20:57:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.114061 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-26 20:57:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.114061 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 20:57:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.114061 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 20:57:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.114061 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 20:57:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.114061 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 21:05:16 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 21:05:16.295 (seconds: 75916.295)!} 2008-Apr-26 21:05:16 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 21:05:16.295 (seconds: 75916.295)! 2008-Apr-26 21:05:17 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 75915.0 to 75916.0! 2008-Apr-26 21:05:18 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (75915.0 - 75917.0)! 2008-Apr-26 21:17:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-26 21:17:57 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-26 21:17:57 LOG5 end_task: Level: (4) ID = <10305> Status = 0 0 0 0 ok 2008-Apr-26 21:17:57 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-26 21:17:57 LOG5 end_task: Level: (3) ID = <10304> Status = 0 0 0 0 ok 2008-Apr-26 21:17:57 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-26 21:17:57 LOG5 finish_task: Level: (2) ID = <10272> Status = 0 0 0 0 ok 2008-Apr-26 21:17:57 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-26 21:17:57 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-26 21:17:57 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-26 21:17:57 LOG5 end_task: Level: (2) ID = <10272> Status = 0 0 0 0 ok 2008-Apr-26 21:17:57 COMMAND run_command_line: EXECUTING command 31: 'FIXEDDRIFT az=313.29 alfaangle=58.9 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_069 ra=120900.00 dec=71800.00' 2008-Apr-26 21:17:57 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-26 21:17:58 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-26 21:17:58 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 313.29 58.9 hcorcal 5 tracking no first 1 AGESVC1A_p2_069 120900.00 71800.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-26 21:17:58 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-26 21:17:58 LOG5 begin_task: Level: (2) ID = <10306> Status = 0 0 0 0 ok 2008-Apr-26 21:17:58 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES3193_p2_023' 2008-Apr-26 21:17:58 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-26 21:17:58 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1A_p2_069} 2008-Apr-26 21:17:58 INFO3 fixed_driftmap: Sending telescope to Az = 313.29 and ZA = 15.76 2008-Apr-26 21:17:58 LOG3 track_source: Calling 'track_source AGESVC1A_p2_069 313.29 15.7648407079 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-26 21:17:58 START begin_task: Starting task 'sending tracking commands' 2008-Apr-26 21:17:58 LOG5 begin_task: Level: (3) ID = <10307> Status = 0 0 0 0 ok 2008-Apr-26 21:17:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_069} INFO {Slewing to source 'AGESVC1A_p2_069' ...} 2008-Apr-26 21:17:58 INFO1 track_source: Starting to track AGESVC1A_p2_069 2008-Apr-26 21:17:58 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_069" 2008-Apr-26 21:17:58 LOG3 vw_send: To DATATAKING: set ra 313.29 2008-Apr-26 21:17:58 LOG3 vw_send: To DATATAKING: set dec 15.7648407079 2008-Apr-26 21:17:58 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-26 21:17:58 LOG3 vw_send: To DATATAKING: pnt tr 313.29 15.7648407079 -CF 2008-Apr-26 21:17:58 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-26 21:17:58 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-26 21:17:58 LOG5 finish_task: Level: (3) ID = <10307> Status = 0 0 0 0 ok 2008-Apr-26 21:17:58 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-26 21:17:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 21:17:58 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-26 21:17:58 LOG5 end_task: Level: (3) ID = <10307> Status = 0 0 0 0 ok 2008-Apr-26 21:17:58 START begin_task: Starting task 'rotate ALFA to +58.9 degrees' 2008-Apr-26 21:17:58 LOG5 begin_task: Level: (3) ID = <10308> Status = 0 0 0 0 ok 2008-Apr-26 21:17:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +58.9 degrees ...} 2008-Apr-26 21:17:58 INFO2 rotate_alfa: ALFA commanded to +58.9 degrees 2008-Apr-26 21:17:58 LOG3 sock_errsend: To ALFAMOTOR: POSITION 58.9 REPLY 2008-Apr-26 21:17:58 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-26 21:17:58 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-26 21:17:58 LOG5 begin_task: Level: (4) ID = <10309> Status = 0 0 0 0 ok 2008-Apr-26 21:17:58 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_069" 2008-Apr-26 21:17:58 LOG4 got_cormsg: From DATATAKING: set ra 313.29 2008-Apr-26 21:17:58 LOG4 got_cormsg: From DATATAKING: set dec 15.7648407079 2008-Apr-26 21:17:58 LOG4 got_cormsg: From DATATAKING: vw% 313.29 2008-Apr-26 21:17:58 LOG4 got_cormsg: From DATATAKING: vw% 15.7648407079 2008-Apr-26 21:17:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 21:17:58 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-26 21:17:58 LOG4 got_cormsg: From DATATAKING: pnt tr 313.29 15.7648407079 -CF 2008-Apr-26 21:17:58 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-26 21:17:58 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-26 21:17:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 21:19:22 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-26 21:19:22 INFO3 alfa_motor: ALFA rotator in-position +58.90 degrees 2008-Apr-26 21:19:22 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-26 21:19:22 LOG5 end_task: Level: (4) ID = <10309> Status = 0 0 0 0 ok 2008-Apr-26 21:19:22 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-26 21:19:22 STOP finish_task: Finishing task 'rotate ALFA to +58.9 degrees' 2008-Apr-26 21:19:22 LOG5 finish_task: Level: (3) ID = <10308> Status = 0 0 0 0 ok 2008-Apr-26 21:19:22 INFO2 finish_task: DONE finished configuration: rotating ALFA to +58.9 degrees 2008-Apr-26 21:19:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 21:19:22 STOP end_task: Finishing task 'rotate ALFA to +58.9 degrees' with status 'OK' 2008-Apr-26 21:19:22 LOG5 end_task: Level: (3) ID = <10308> Status = 0 0 0 0 ok 2008-Apr-26 21:19:22 START begin_task: Starting task 'waiting on telescope' 2008-Apr-26 21:19:22 LOG5 begin_task: Level: (3) ID = <10310> Status = 0 0 0 0 ok 2008-Apr-26 21:19:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-26 21:19:22 LOG3 waittrk: Start waittrk 5 2008-Apr-26 21:19:22 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-26 21:19:22 LOG5 begin_task: Level: (4) ID = <10311> Status = 0 0 0 0 ok 2008-Apr-26 21:19:27 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-26 21:19:27 LOG5 end_task: Level: (4) ID = <10311> Status = 0 0 0 0 ok 2008-Apr-26 21:19:27 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-26 21:19:27 LOG5 begin_task: Level: (4) ID = <10312> Status = 0 0 0 0 ok 2008-Apr-26 21:26:16 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-26 21:26:16 LOG5 end_task: Level: (4) ID = <10312> Status = 0 0 0 0 ok 2008-Apr-26 21:26:16 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-26 21:26:16 INFO2 waittrk: Now tracking AGESVC1A_p2_069 2008-Apr-26 21:26:16 LOG4 waittrk: Current telescope position: Az = 312.91 ZA = 15.76 2008-Apr-26 21:26:16 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-26 21:26:16 LOG5 finish_task: Level: (3) ID = <10310> Status = 0 0 0 0 ok 2008-Apr-26 21:26:16 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-26 21:26:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 21:26:16 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-26 21:26:16 LOG5 end_task: Level: (3) ID = <10310> Status = 0 0 0 0 ok 2008-Apr-26 21:26:16 START begin_task: Starting task 'selecting calibration type' 2008-Apr-26 21:26:16 LOG5 begin_task: Level: (3) ID = <10313> Status = 0 0 0 0 ok 2008-Apr-26 21:26:16 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-26 21:26:16 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-26 21:26:16 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 21:26:16 START begin_task: Starting task 'waiting on setcal' 2008-Apr-26 21:26:16 LOG5 begin_task: Level: (4) ID = <10314> Status = 0 0 0 0 ok 2008-Apr-26 21:26:16 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-26 21:26:16 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 21:26:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 21:26:17 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-26 21:26:17 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-26 21:26:17 LOG5 end_task: Level: (4) ID = <10314> Status = 0 0 0 0 ok 2008-Apr-26 21:26:17 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-26 21:26:17 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-26 21:26:17 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-26 21:26:17 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-26 21:26:17 LOG5 begin_task: Level: (4) ID = <10315> Status = 0 0 0 0 ok 2008-Apr-26 21:26:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 21:26:17 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-26 21:26:17 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-26 21:26:17 LOG5 end_task: Level: (4) ID = <10315> Status = 0 0 0 0 ok 2008-Apr-26 21:26:17 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-26 21:26:17 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-26 21:26:17 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-26 21:26:17 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-26 21:26:17 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-26 21:26:17 LOG5 begin_task: Level: (4) ID = <10316> Status = 0 0 0 0 ok 2008-Apr-26 21:26:17 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-26 21:26:17 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-26 21:26:17 LOG5 end_task: Level: (4) ID = <10316> Status = 0 0 0 0 ok 2008-Apr-26 21:26:17 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-26 21:26:17 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-26 21:26:17 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-26 21:26:17 LOG5 finish_task: Level: (3) ID = <10313> Status = 0 0 0 0 ok 2008-Apr-26 21:26:17 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-26 21:26:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 21:26:17 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-26 21:26:17 LOG5 end_task: Level: (3) ID = <10313> Status = 0 0 0 0 ok 2008-Apr-26 21:26:17 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2008-Apr-26 21:26:17 INFO2 astwait: Waiting for 93 seconds from 01:26:17 to 01:27:50 UTC ... 2008-Apr-26 21:26:17 LOG4 send_obs_status: To obs_status: <1> TASKTIME 93 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-26 21:26:17 START begin_task: Starting task 'waiting on waiting for AST time' 2008-Apr-26 21:26:17 LOG5 begin_task: Level: (3) ID = <10317> Status = 0 0 0 0 ok 2008-Apr-26 21:27:50 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2008-Apr-26 21:27:50 LOG5 end_task: Level: (3) ID = <10317> Status = 0 0 0 0 ok 2008-Apr-26 21:27:50 INFO3 astwait: Finished waiting 2008-Apr-26 21:27:50 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-26 21:27:50 LOG5 dopset_later: Calling 'dopset_later 60.811523858994825' 2008-Apr-26 21:27:50 INFO3 dopset_later: Setting Doppler correction for 21:28:50 (60.8 seconds from now) 2008-Apr-26 21:27:50 LOG5 antvel: Calling 'antvel 313.290000 15.764841 F 60.811523858994825' 2008-Apr-26 21:27:50 LOG2 antvel: Parameters to Doppler: Heliocentric 91730 2008 117 0.0 2008-Apr-26 21:27:50 INFO5 antvel: Computed antenna velocity: +17.56269 km/s 2008-Apr-26 21:27:50 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=17.562687839199999 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-26 21:27:50 INFO4 dopset_gen: New sky frequencies: 1381.162516 1381.162516 1381.162516 1381.162516 1381.162516 1381.162516 1381.162516 1381.162516 1381.162516 2008-Apr-26 21:27:50 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.162516 sky0=1381.162516 sky1=1381.162516 sky2=1381.162516 sky3=1381.162516 sky4=1381.162516 sky5=1381.162516 sky6=1381.162516 sky7=1381.162516 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-26 21:27:50 LOG2 dopset_gen: Result from 'sky2syn': 1631.162516 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-26 21:27:50 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631162516.0} 2008-Apr-26 21:27:50 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 21:27:50 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-26 21:27:50 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-26 21:27:50 INFO5 fixed_driftmap: Tracking J2000 position: RA = 12:08:03.7 Dec = +07:17:51.3 2008-Apr-26 21:27:50 LOG3 track_source: Calling 'track_source AGESVC1A_p2_069 120803.7 071751.3 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-26 21:27:50 START begin_task: Starting task 'sending tracking commands' 2008-Apr-26 21:27:50 LOG5 begin_task: Level: (3) ID = <10318> Status = 0 0 0 0 ok 2008-Apr-26 21:27:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_069} INFO {Slewing to source 'AGESVC1A_p2_069' ...} 2008-Apr-26 21:27:50 INFO1 track_source: Starting to track AGESVC1A_p2_069 2008-Apr-26 21:27:50 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_069" 2008-Apr-26 21:27:50 LOG3 vw_send: To DATATAKING: set ra 120803.7 2008-Apr-26 21:27:50 LOG3 vw_send: To DATATAKING: set dec 071751.3 2008-Apr-26 21:27:50 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-26 21:27:50 LOG3 vw_send: To DATATAKING: pnt tr 120803.7 071751.3 -CJ 2008-Apr-26 21:27:50 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-26 21:27:50 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-26 21:27:50 LOG5 finish_task: Level: (3) ID = <10318> Status = 0 0 0 0 ok 2008-Apr-26 21:27:50 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-26 21:27:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 21:27:50 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-26 21:27:50 LOG5 end_task: Level: (3) ID = <10318> Status = 0 0 0 0 ok 2008-Apr-26 21:27:50 START begin_task: Starting task 'waiting on telescope' 2008-Apr-26 21:27:50 LOG5 begin_task: Level: (3) ID = <10319> Status = 0 0 0 0 ok 2008-Apr-26 21:27:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-26 21:27:50 LOG3 waittrk: Start waittrk 5 2008-Apr-26 21:27:50 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-26 21:27:50 LOG5 begin_task: Level: (4) ID = <10320> Status = 0 0 0 0 ok 2008-Apr-26 21:27:50 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631162516.0} 2008-Apr-26 21:27:50 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 21:27:50 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_069" 2008-Apr-26 21:27:50 LOG4 got_cormsg: From DATATAKING: set ra 120803.7 2008-Apr-26 21:27:50 LOG4 got_cormsg: From DATATAKING: set dec 071751.3 2008-Apr-26 21:27:50 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-26 21:27:50 LOG4 got_cormsg: From DATATAKING: vw% 120803.7 2008-Apr-26 21:27:50 LOG4 got_cormsg: From DATATAKING: vw% 071751.3 2008-Apr-26 21:27:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 21:27:50 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-26 21:27:50 LOG4 got_cormsg: From DATATAKING: pnt tr 120803.7 071751.3 -CJ 2008-Apr-26 21:27:50 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-26 21:27:50 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-26 21:27:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 21:27:55 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-26 21:27:55 LOG5 end_task: Level: (4) ID = <10320> Status = 0 0 0 0 ok 2008-Apr-26 21:27:55 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-26 21:27:55 LOG5 begin_task: Level: (4) ID = <10321> Status = 0 0 0 0 ok 2008-Apr-26 21:27:57 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-26 21:27:57 LOG5 end_task: Level: (4) ID = <10321> Status = 0 0 0 0 ok 2008-Apr-26 21:27:57 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-26 21:27:57 INFO2 waittrk: Now tracking AGESVC1A_p2_069 2008-Apr-26 21:27:57 LOG4 waittrk: Current telescope position: Az = 312.96 ZA = 15.75 2008-Apr-26 21:27:57 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-26 21:27:57 LOG5 finish_task: Level: (3) ID = <10319> Status = 0 0 0 0 ok 2008-Apr-26 21:27:57 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-26 21:27:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 21:27:57 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-26 21:27:57 LOG5 end_task: Level: (3) ID = <10319> Status = 0 0 0 0 ok 2008-Apr-26 21:27:57 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-26 21:27:57 LOG5 begin_task: Level: (3) ID = <10322> Status = 0 0 0 0 ok 2008-Apr-26 21:27:57 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-26 21:27:57 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-26 21:27:57 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-26 21:27:57 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-26 21:27:57 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 21:27:57 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-26 21:27:57 LOG5 begin_task: Level: (4) ID = <10323> Status = 0 0 0 0 ok 2008-Apr-26 21:27:57 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-26 21:27:57 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 21:28:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 21:28:00 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-26 21:28:00 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-26 21:28:00 LOG5 end_task: Level: (4) ID = <10323> Status = 0 0 0 0 ok 2008-Apr-26 21:28:00 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-26 21:28:00 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-26 21:28:00 LOG5 begin_task: Level: (4) ID = <10324> Status = 0 0 0 0 ok 2008-Apr-26 21:28:00 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-26 21:28:00 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-26 21:28:00 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-26 21:28:00 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-26 21:28:00 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-26 21:28:00 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-26 21:28:00 LOG5 begin_task: Level: (5) ID = <10325> Status = 0 0 0 0 ok 2008-Apr-26 21:28:00 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-26 21:28:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 21:28:01 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 1 dB --- beam 1: 7 6 dB 2008-Apr-26 21:28:01 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 6 dB 2008-Apr-26 21:28:01 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 2 3 dB 2008-Apr-26 21:28:01 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-26 21:28:01 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-26 21:28:01 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-26 21:28:01 LOG5 end_task: Level: (5) ID = <10325> Status = 0 0 0 0 ok 2008-Apr-26 21:28:01 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.915 1.044 ALFA beam 1: 1.125 1.090 2008-Apr-26 21:28:01 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.078 0.988 ALFA beam 3: 1.024 1.072 2008-Apr-26 21:28:01 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.972 1.011 ALFA beam 5: 1.054 0.955 2008-Apr-26 21:28:01 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.004 1.040 ALFA beam 7: 1.096 0.930 2008-Apr-26 21:28:01 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-26 21:28:01 LOG5 finish_task: Level: (4) ID = <10324> Status = 0 0 0 0 ok 2008-Apr-26 21:28:01 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-26 21:28:01 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 21:28:01 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-26 21:28:01 LOG5 end_task: Level: (4) ID = <10324> Status = 0 0 0 0 ok 2008-Apr-26 21:28:01 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-26 21:28:01 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-26 21:28:01 LOG5 finish_task: Level: (3) ID = <10322> Status = 0 0 0 0 ok 2008-Apr-26 21:28:01 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-26 21:28:01 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 21:28:01 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-26 21:28:01 LOG5 end_task: Level: (3) ID = <10322> Status = 0 0 0 0 ok 2008-Apr-26 21:28:01 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 SS 2008-Apr-26 21:28:01 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 SS 2008-Apr-26 21:28:01 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 SS 2008-Apr-26 21:28:01 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 SS 2008-Apr-26 21:28:01 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-26 21:28:01 START begin_task: Starting task 'WAPP calibration' 2008-Apr-26 21:28:01 LOG5 begin_task: Level: (3) ID = <10326> Status = 0 0 0 0 ok 2008-Apr-26 21:28:01 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-26 21:28:01 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-26 21:28:01 START begin_task: Starting task 'selecting calibration type' 2008-Apr-26 21:28:01 LOG5 begin_task: Level: (4) ID = <10327> Status = 0 0 0 0 ok 2008-Apr-26 21:28:01 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-26 21:28:01 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-26 21:28:01 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 21:28:01 START begin_task: Starting task 'waiting on setcal' 2008-Apr-26 21:28:01 LOG5 begin_task: Level: (5) ID = <10328> Status = 0 0 0 0 ok 2008-Apr-26 21:28:01 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 SS' 2008-Apr-26 21:28:01 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-26 21:28:01 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 21:28:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 21:28:02 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-26 21:28:02 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-26 21:28:02 LOG5 end_task: Level: (5) ID = <10328> Status = 0 0 0 0 ok 2008-Apr-26 21:28:02 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-26 21:28:02 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-26 21:28:02 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-26 21:28:02 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-26 21:28:02 LOG5 begin_task: Level: (5) ID = <10329> Status = 0 0 0 0 ok 2008-Apr-26 21:28:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 21:28:02 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-26 21:28:02 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-26 21:28:02 LOG5 end_task: Level: (5) ID = <10329> Status = 0 0 0 0 ok 2008-Apr-26 21:28:02 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-26 21:28:02 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-26 21:28:02 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-26 21:28:02 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-26 21:28:02 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-26 21:28:02 LOG5 begin_task: Level: (5) ID = <10330> Status = 0 0 0 0 ok 2008-Apr-26 21:28:02 NOTE WAPPDATA-new_file: New FITS file: wapp.20080426.a2048.0007.fits 2008-Apr-26 21:28:02 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-26 21:28:02 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-26 21:28:02 LOG5 end_task: Level: (5) ID = <10330> Status = 0 0 0 0 ok 2008-Apr-26 21:28:02 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-26 21:28:02 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-26 21:28:02 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-26 21:28:02 LOG5 finish_task: Level: (4) ID = <10327> Status = 0 0 0 0 ok 2008-Apr-26 21:28:02 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-26 21:28:02 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 21:28:02 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-26 21:28:02 LOG5 end_task: Level: (4) ID = <10327> Status = 0 0 0 0 ok 2008-Apr-26 21:28:02 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-26 21:28:02 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-26 21:28:02 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-26 21:28:02 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-26 21:28:02 LOG5 begin_task: Level: (4) ID = <10331> Status = 0 0 0 0 ok 2008-Apr-26 21:28:02 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080426.a2048.0007.fits} 2008-Apr-26 21:28:02 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-26 21:28:02 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-26 21:28:02 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-26 21:28:02 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-26 21:28:02 LOG5 end_task: Level: (4) ID = <10331> Status = 0 0 0 0 ok 2008-Apr-26 21:28:02 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-26 21:28:02 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-26 21:28:02 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-26 21:28:02 LOG5 begin_task: Level: (4) ID = <10332> Status = 0 0 0 0 ok 2008-Apr-26 21:28:02 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-26 21:28:02 LOG5 log_alfabeam: Parameters: 12.13436111111111 7.2975833333333338 11.377613 2008.322777460897 58.899925 2008-Apr-26 21:28:02 LOG4 log_alfabeam: ALFABEAM 0 12.134361111111108 7.297583333333337 2008-Apr-26 21:28:02 LOG4 log_alfabeam: ALFABEAM 1 12.132116605145285 7.395285601516590 2008-Apr-26 21:28:02 LOG4 log_alfabeam: ALFABEAM 2 12.127821718256307 7.330643822252603 2008-Apr-26 21:28:02 LOG4 log_alfabeam: ALFABEAM 3 12.130029357118058 7.232754899301190 2008-Apr-26 21:28:02 LOG4 log_alfabeam: ALFABEAM 4 12.136574303524393 7.199610236257065 2008-Apr-26 21:28:02 LOG4 log_alfabeam: ALFABEAM 5 12.140918902772059 7.264972263653909 2008-Apr-26 21:28:02 LOG4 log_alfabeam: ALFABEAM 6 12.138668828936634 7.362758304077558 2008-Apr-26 21:28:02 INFO2 take_spectra: Starting WAPP scan: 811700472 2008-Apr-26 21:28:03 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-26 21:28:03 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-26 21:28:03 LOG5 begin_task: Level: (5) ID = <10333> Status = 0 0 0 0 ok 2008-Apr-26 21:28:03 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-26 21:28:03 INFO1 WAPP=1+2+3+4-start_spectra: start sec 5284.00 2008-Apr-26 21:28:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.162516 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-26 21:28:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.162516 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-26 21:28:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.162516 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-26 21:28:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.162516 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-26 21:28:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.162516 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-26 21:28:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.162516 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 21:28:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.162516 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 21:28:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.162516 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 21:28:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.162516 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 21:28:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-26 21:28:09 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-26 21:28:09 LOG5 end_task: Level: (5) ID = <10333> Status = 0 0 0 0 ok 2008-Apr-26 21:28:09 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-26 21:28:09 LOG5 end_task: Level: (4) ID = <10332> Status = 0 0 0 0 ok 2008-Apr-26 21:28:09 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-26 21:28:09 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-26 21:28:09 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-26 21:28:09 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-26 21:28:09 LOG5 begin_task: Level: (4) ID = <10334> Status = 0 0 0 0 ok 2008-Apr-26 21:28:09 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-26 21:28:09 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-26 21:28:09 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-26 21:28:09 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-26 21:28:09 LOG5 end_task: Level: (4) ID = <10334> Status = 0 0 0 0 ok 2008-Apr-26 21:28:09 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-26 21:28:09 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-26 21:28:09 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-26 21:28:09 LOG5 begin_task: Level: (4) ID = <10335> Status = 0 0 0 0 ok 2008-Apr-26 21:28:09 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-26 21:28:09 LOG5 log_alfabeam: Parameters: 12.13436111111111 7.2975833333333338 11.379563 2008.3227776827136 58.899925 2008-Apr-26 21:28:09 LOG4 log_alfabeam: ALFABEAM 0 12.134361111111106 7.297583333333340 2008-Apr-26 21:28:09 LOG4 log_alfabeam: ALFABEAM 1 12.132124659641487 7.395326394282597 2008-Apr-26 21:28:09 LOG4 log_alfabeam: ALFABEAM 2 12.127824466927994 7.330763708057662 2008-Apr-26 21:28:09 LOG4 log_alfabeam: ALFABEAM 3 12.130023988053892 7.232834409794948 2008-Apr-26 21:28:09 LOG4 log_alfabeam: ALFABEAM 4 12.136566189039939 7.199569654921231 2008-Apr-26 21:28:09 LOG4 log_alfabeam: ALFABEAM 5 12.140916216040843 7.264852675681211 2008-Apr-26 21:28:09 LOG4 log_alfabeam: ALFABEAM 6 12.138674193352012 7.362679713623021 2008-Apr-26 21:28:09 INFO2 take_spectra: Starting WAPP scan: 811700473 2008-Apr-26 21:28:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-26 21:28:10 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-26 21:28:10 LOG5 begin_task: Level: (5) ID = <10336> Status = 0 0 0 0 ok 2008-Apr-26 21:28:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-26 21:28:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 5291.00 2008-Apr-26 21:28:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.536 > 1.4)! 2008-Apr-26 21:28:15 LOG4 check_wapp_levels: WAPP-1 power levels: 1.256 1.331 1.519 1.467 2008-Apr-26 21:28:15 LOG4 check_wapp_levels: WAPP-2 power levels: 1.446 1.348 1.397 1.459 2008-Apr-26 21:28:15 LOG4 check_wapp_levels: WAPP-3 power levels: 1.336 1.382 1.451 1.267 2008-Apr-26 21:28:15 LOG4 check_wapp_levels: WAPP-4 power levels: 1.409 1.442 1.536 1.288 2008-Apr-26 21:28:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.162516 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-26 21:28:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.162516 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-26 21:28:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.162516 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-26 21:28:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.162516 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-26 21:28:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.162516 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-26 21:28:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.162516 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 21:28:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.162516 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 21:28:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.162516 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 21:28:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.162516 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 21:28:16 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-26 21:28:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-26 21:28:16 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-26 21:28:16 LOG5 end_task: Level: (5) ID = <10336> Status = 0 0 0 0 ok 2008-Apr-26 21:28:16 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-26 21:28:16 LOG5 end_task: Level: (4) ID = <10335> Status = 0 0 0 0 ok 2008-Apr-26 21:28:16 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-26 21:28:16 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-26 21:28:16 LOG5 finish_task: Level: (3) ID = <10326> Status = 0 0 0 0 ok 2008-Apr-26 21:28:16 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-26 21:28:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 21:28:16 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-26 21:28:16 LOG5 end_task: Level: (3) ID = <10326> Status = 0 0 0 0 ok 2008-Apr-26 21:28:16 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-26 21:28:16 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 313.29 and ZA = 15.76 2008-Apr-26 21:28:16 LOG3 track_source: Calling 'track_source AGESVC1A_p2_069 313.29 15.7648407079 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-26 21:28:16 START begin_task: Starting task 'sending tracking commands' 2008-Apr-26 21:28:16 LOG5 begin_task: Level: (3) ID = <10337> Status = 0 0 0 0 ok 2008-Apr-26 21:28:16 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_069} INFO {Slewing to source 'AGESVC1A_p2_069' ...} 2008-Apr-26 21:28:16 INFO1 track_source: Starting to track AGESVC1A_p2_069 2008-Apr-26 21:28:16 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_069" 2008-Apr-26 21:28:16 LOG3 vw_send: To DATATAKING: set ra 313.29 2008-Apr-26 21:28:16 LOG3 vw_send: To DATATAKING: set dec 15.7648407079 2008-Apr-26 21:28:16 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-26 21:28:16 LOG3 vw_send: To DATATAKING: pnt tr 313.29 15.7648407079 -CF 2008-Apr-26 21:28:16 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-26 21:28:16 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-26 21:28:16 LOG5 finish_task: Level: (3) ID = <10337> Status = 0 0 0 0 ok 2008-Apr-26 21:28:16 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-26 21:28:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 21:28:17 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-26 21:28:17 LOG5 end_task: Level: (3) ID = <10337> Status = 0 0 0 0 ok 2008-Apr-26 21:28:17 LOG1 fixed_driftmap: Parameters: HA = -00:45:59.8 Start = 11:23:27.3 LST = 11:22:53.4 diff = 33.9 secs 2008-Apr-26 21:28:17 INFO2 fixed_driftmap: Waiting 31.9 seconds for RA 12:09:27 2008-Apr-26 21:28:17 INFO2 lstwait: Waiting for 31.8 secs from LST 11:22:53 to LST 11:23:25 ... 2008-Apr-26 21:28:17 LOG4 send_obs_status: To obs_status: <1> TASKTIME 31.815311877232517 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-26 21:28:17 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-26 21:28:17 LOG5 begin_task: Level: (3) ID = <10338> Status = 0 0 0 0 ok 2008-Apr-26 21:28:17 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_069" 2008-Apr-26 21:28:17 LOG4 got_cormsg: From DATATAKING: set ra 313.29 2008-Apr-26 21:28:17 LOG4 got_cormsg: From DATATAKING: set dec 15.7648407079 2008-Apr-26 21:28:17 LOG4 got_cormsg: From DATATAKING: vw% 313.29 2008-Apr-26 21:28:17 LOG4 got_cormsg: From DATATAKING: vw% 15.7648407079 2008-Apr-26 21:28:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 21:28:17 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-26 21:28:17 LOG4 got_cormsg: From DATATAKING: pnt tr 313.29 15.7648407079 -CF 2008-Apr-26 21:28:17 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-26 21:28:17 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-26 21:28:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 21:28:21 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.917 and 1.128 2008-Apr-26 21:28:48 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-26 21:28:48 LOG5 end_task: Level: (3) ID = <10338> Status = 0 0 0 0 ok 2008-Apr-26 21:28:48 LOG4 lstwait: Finished waiting, the gui caused difference: 0.1843817600040154 2008-Apr-26 21:28:48 INFO3 lstwait: Finished waiting 2008-Apr-26 21:28:48 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-26 21:28:48 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-26 21:28:49 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-26 21:28:49 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-26 21:28:49 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-26 21:28:49 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-26 21:28:49 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-26 21:28:49 LOG5 begin_task: Level: (3) ID = <10339> Status = 0 0 0 0 ok 2008-Apr-26 21:28:49 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-26 21:28:49 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-26 21:28:49 INFO2 take_spectra: Starting WAPP scan: 811700474 2008-Apr-26 21:28:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-26 21:28:49 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-26 21:28:49 LOG5 begin_task: Level: (4) ID = <10340> Status = 0 0 0 0 ok 2008-Apr-26 21:28:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-26 21:28:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 5330.00 2008-Apr-26 21:28:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.162516 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-26 21:28:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.162516 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-26 21:28:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.162516 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-26 21:28:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.162516 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-26 21:28:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.162516 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-26 21:28:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.162516 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 21:28:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.162516 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 21:28:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.162516 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 21:28:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.162516 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 21:35:14 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 21:35:14.315 (seconds: 77714.315)!} 2008-Apr-26 21:35:14 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 21:35:14.315 (seconds: 77714.315)! 2008-Apr-26 21:35:15 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 77713.0 to 77714.0! 2008-Apr-26 21:35:16 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (77713.0 - 77715.0)! 2008-Apr-26 21:48:50 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-26 21:48:50 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-26 21:48:50 LOG5 end_task: Level: (4) ID = <10340> Status = 0 0 0 0 ok 2008-Apr-26 21:48:50 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-26 21:48:50 LOG5 end_task: Level: (3) ID = <10339> Status = 0 0 0 0 ok 2008-Apr-26 21:48:50 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-26 21:48:50 LOG5 finish_task: Level: (2) ID = <10306> Status = 0 0 0 0 ok 2008-Apr-26 21:48:50 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-26 21:48:50 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-26 21:48:50 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-26 21:48:50 LOG5 end_task: Level: (2) ID = <10306> Status = 0 0 0 0 ok 2008-Apr-26 21:48:50 COMMAND run_command_line: EXECUTING command 35: 'FIXEDDRIFT az=332.61 alfaangle=41.9 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_071 ra=120900.00 dec=71500.00' 2008-Apr-26 21:48:50 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-26 21:48:51 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-26 21:48:51 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 332.61 41.9 hcorcal 5 tracking no first 1 AGESVC1A_p2_071 120900.00 71500.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-26 21:48:51 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-26 21:48:51 LOG5 begin_task: Level: (2) ID = <10341> Status = 0 0 0 0 ok 2008-Apr-26 21:48:51 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGESVC1A_p2_069' 2008-Apr-26 21:48:51 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-26 21:48:51 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1A_p2_071} 2008-Apr-26 21:48:51 INFO3 fixed_driftmap: Sending telescope to Az = 332.61 and ZA = 12.48 2008-Apr-26 21:48:51 LOG3 track_source: Calling 'track_source AGESVC1A_p2_071 332.61 12.4784419935 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-26 21:48:51 START begin_task: Starting task 'sending tracking commands' 2008-Apr-26 21:48:51 LOG5 begin_task: Level: (3) ID = <10342> Status = 0 0 0 0 ok 2008-Apr-26 21:48:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_071} INFO {Slewing to source 'AGESVC1A_p2_071' ...} 2008-Apr-26 21:48:51 INFO1 track_source: Starting to track AGESVC1A_p2_071 2008-Apr-26 21:48:51 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_071" 2008-Apr-26 21:48:51 LOG3 vw_send: To DATATAKING: set ra 332.61 2008-Apr-26 21:48:51 LOG3 vw_send: To DATATAKING: set dec 12.4784419935 2008-Apr-26 21:48:51 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-26 21:48:51 LOG3 vw_send: To DATATAKING: pnt tr 332.61 12.4784419935 -CF 2008-Apr-26 21:48:51 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-26 21:48:51 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-26 21:48:51 LOG5 finish_task: Level: (3) ID = <10342> Status = 0 0 0 0 ok 2008-Apr-26 21:48:51 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-26 21:48:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 21:48:51 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-26 21:48:51 LOG5 end_task: Level: (3) ID = <10342> Status = 0 0 0 0 ok 2008-Apr-26 21:48:51 START begin_task: Starting task 'rotate ALFA to +41.9 degrees' 2008-Apr-26 21:48:51 LOG5 begin_task: Level: (3) ID = <10343> Status = 0 0 0 0 ok 2008-Apr-26 21:48:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +41.9 degrees ...} 2008-Apr-26 21:48:51 INFO2 rotate_alfa: ALFA commanded to +41.9 degrees 2008-Apr-26 21:48:51 LOG3 sock_errsend: To ALFAMOTOR: POSITION 41.9 REPLY 2008-Apr-26 21:48:51 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-26 21:48:51 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-26 21:48:51 LOG5 begin_task: Level: (4) ID = <10344> Status = 0 0 0 0 ok 2008-Apr-26 21:48:51 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_071" 2008-Apr-26 21:48:51 LOG4 got_cormsg: From DATATAKING: set ra 332.61 2008-Apr-26 21:48:51 LOG4 got_cormsg: From DATATAKING: set dec 12.4784419935 2008-Apr-26 21:48:51 LOG4 got_cormsg: From DATATAKING: vw% 332.61 2008-Apr-26 21:48:51 LOG4 got_cormsg: From DATATAKING: vw% 12.4784419935 2008-Apr-26 21:48:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 21:48:51 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-26 21:48:51 LOG4 got_cormsg: From DATATAKING: pnt tr 332.61 12.4784419935 -CF 2008-Apr-26 21:48:51 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-26 21:48:51 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-26 21:48:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 21:49:02 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-26 21:49:02 INFO3 alfa_motor: ALFA rotator in-position +41.90 degrees 2008-Apr-26 21:49:02 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-26 21:49:02 LOG5 end_task: Level: (4) ID = <10344> Status = 0 0 0 0 ok 2008-Apr-26 21:49:02 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-26 21:49:02 STOP finish_task: Finishing task 'rotate ALFA to +41.9 degrees' 2008-Apr-26 21:49:02 LOG5 finish_task: Level: (3) ID = <10343> Status = 0 0 0 0 ok 2008-Apr-26 21:49:02 INFO2 finish_task: DONE finished configuration: rotating ALFA to +41.9 degrees 2008-Apr-26 21:49:02 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 21:49:02 STOP end_task: Finishing task 'rotate ALFA to +41.9 degrees' with status 'OK' 2008-Apr-26 21:49:02 LOG5 end_task: Level: (3) ID = <10343> Status = 0 0 0 0 ok 2008-Apr-26 21:49:02 START begin_task: Starting task 'waiting on telescope' 2008-Apr-26 21:49:02 LOG5 begin_task: Level: (3) ID = <10345> Status = 0 0 0 0 ok 2008-Apr-26 21:49:02 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-26 21:49:02 LOG3 waittrk: Start waittrk 5 2008-Apr-26 21:49:02 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-26 21:49:02 LOG5 begin_task: Level: (4) ID = <10346> Status = 0 0 0 0 ok 2008-Apr-26 21:49:07 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-26 21:49:07 LOG5 end_task: Level: (4) ID = <10346> Status = 0 0 0 0 ok 2008-Apr-26 21:49:07 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-26 21:49:07 LOG5 begin_task: Level: (4) ID = <10347> Status = 0 0 0 0 ok 2008-Apr-26 21:50:13 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 21:50:13.295 (seconds: 78613.295)!} 2008-Apr-26 21:50:13 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 21:50:13.295 (seconds: 78613.295)! 2008-Apr-26 21:50:20 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-26 21:50:20 LOG5 end_task: Level: (4) ID = <10347> Status = 0 0 0 0 ok 2008-Apr-26 21:50:20 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-26 21:50:20 INFO2 waittrk: Now tracking AGESVC1A_p2_071 2008-Apr-26 21:50:20 LOG4 waittrk: Current telescope position: Az = 332.22 ZA = 12.46 2008-Apr-26 21:50:20 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-26 21:50:20 LOG5 finish_task: Level: (3) ID = <10345> Status = 0 0 0 0 ok 2008-Apr-26 21:50:20 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-26 21:50:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 21:50:20 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-26 21:50:20 LOG5 end_task: Level: (3) ID = <10345> Status = 0 0 0 0 ok 2008-Apr-26 21:50:20 START begin_task: Starting task 'selecting calibration type' 2008-Apr-26 21:50:20 LOG5 begin_task: Level: (3) ID = <10348> Status = 0 0 0 0 ok 2008-Apr-26 21:50:20 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-26 21:50:20 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-26 21:50:20 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 21:50:20 START begin_task: Starting task 'waiting on setcal' 2008-Apr-26 21:50:20 LOG5 begin_task: Level: (4) ID = <10349> Status = 0 0 0 0 ok 2008-Apr-26 21:50:20 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-26 21:50:20 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 21:50:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 21:50:21 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-26 21:50:21 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-26 21:50:21 LOG5 end_task: Level: (4) ID = <10349> Status = 0 0 0 0 ok 2008-Apr-26 21:50:21 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-26 21:50:21 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-26 21:50:21 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-26 21:50:21 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-26 21:50:21 LOG5 begin_task: Level: (4) ID = <10350> Status = 0 0 0 0 ok 2008-Apr-26 21:50:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 21:50:23 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-26 21:50:23 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-26 21:50:23 LOG5 end_task: Level: (4) ID = <10350> Status = 0 0 0 0 ok 2008-Apr-26 21:50:23 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-26 21:50:23 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-26 21:50:23 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-26 21:50:23 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-26 21:50:23 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-26 21:50:23 LOG5 begin_task: Level: (4) ID = <10351> Status = 0 0 0 0 ok 2008-Apr-26 21:50:23 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-26 21:50:23 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-26 21:50:23 LOG5 end_task: Level: (4) ID = <10351> Status = 0 0 0 0 ok 2008-Apr-26 21:50:23 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-26 21:50:23 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-26 21:50:23 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-26 21:50:23 LOG5 finish_task: Level: (3) ID = <10348> Status = 0 0 0 0 ok 2008-Apr-26 21:50:23 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-26 21:50:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 21:50:23 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-26 21:50:23 LOG5 end_task: Level: (3) ID = <10348> Status = 0 0 0 0 ok 2008-Apr-26 21:50:23 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2008-Apr-26 21:50:23 INFO2 astwait: Waiting for 23 seconds from 01:50:23 to 01:50:46 UTC ... 2008-Apr-26 21:50:23 LOG4 send_obs_status: To obs_status: <1> TASKTIME 23 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-26 21:50:23 START begin_task: Starting task 'waiting on waiting for AST time' 2008-Apr-26 21:50:23 LOG5 begin_task: Level: (3) ID = <10352> Status = 0 0 0 0 ok 2008-Apr-26 21:50:46 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2008-Apr-26 21:50:46 LOG5 end_task: Level: (3) ID = <10352> Status = 0 0 0 0 ok 2008-Apr-26 21:50:46 INFO3 astwait: Finished waiting 2008-Apr-26 21:50:46 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-26 21:50:46 LOG5 dopset_later: Calling 'dopset_later 60.794153895795532' 2008-Apr-26 21:50:46 INFO3 dopset_later: Setting Doppler correction for 21:51:46 (60.8 seconds from now) 2008-Apr-26 21:50:46 LOG5 antvel: Calling 'antvel 332.610000 12.478442 F 60.794153895795532' 2008-Apr-26 21:50:46 LOG2 antvel: Parameters to Doppler: Heliocentric 93106 2008 117 0.0 2008-Apr-26 21:50:46 INFO5 antvel: Computed antenna velocity: +17.60605 km/s 2008-Apr-26 21:50:46 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=17.606048208200001 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-26 21:50:46 INFO4 dopset_gen: New sky frequencies: 1381.162316 1381.162316 1381.162316 1381.162316 1381.162316 1381.162316 1381.162316 1381.162316 1381.162316 2008-Apr-26 21:50:46 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.162316 sky0=1381.162316 sky1=1381.162316 sky2=1381.162316 sky3=1381.162316 sky4=1381.162316 sky5=1381.162316 sky6=1381.162316 sky7=1381.162316 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-26 21:50:46 LOG2 dopset_gen: Result from 'sky2syn': 1631.162316 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-26 21:50:46 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631162316.0} 2008-Apr-26 21:50:46 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 21:50:46 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-26 21:50:46 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-26 21:50:46 INFO5 fixed_driftmap: Tracking J2000 position: RA = 12:08:03.7 Dec = +07:14:51.3 2008-Apr-26 21:50:46 LOG3 track_source: Calling 'track_source AGESVC1A_p2_071 120803.7 071451.3 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-26 21:50:46 START begin_task: Starting task 'sending tracking commands' 2008-Apr-26 21:50:46 LOG5 begin_task: Level: (3) ID = <10353> Status = 0 0 0 0 ok 2008-Apr-26 21:50:46 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_071} INFO {Slewing to source 'AGESVC1A_p2_071' ...} 2008-Apr-26 21:50:46 INFO1 track_source: Starting to track AGESVC1A_p2_071 2008-Apr-26 21:50:46 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_071" 2008-Apr-26 21:50:46 LOG3 vw_send: To DATATAKING: set ra 120803.7 2008-Apr-26 21:50:46 LOG3 vw_send: To DATATAKING: set dec 071451.3 2008-Apr-26 21:50:46 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-26 21:50:46 LOG3 vw_send: To DATATAKING: pnt tr 120803.7 071451.3 -CJ 2008-Apr-26 21:50:46 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-26 21:50:46 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-26 21:50:46 LOG5 finish_task: Level: (3) ID = <10353> Status = 0 0 0 0 ok 2008-Apr-26 21:50:46 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-26 21:50:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 21:50:46 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-26 21:50:46 LOG5 end_task: Level: (3) ID = <10353> Status = 0 0 0 0 ok 2008-Apr-26 21:50:46 START begin_task: Starting task 'waiting on telescope' 2008-Apr-26 21:50:46 LOG5 begin_task: Level: (3) ID = <10354> Status = 0 0 0 0 ok 2008-Apr-26 21:50:46 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-26 21:50:46 LOG3 waittrk: Start waittrk 5 2008-Apr-26 21:50:46 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-26 21:50:46 LOG5 begin_task: Level: (4) ID = <10355> Status = 0 0 0 0 ok 2008-Apr-26 21:50:46 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631162316.0} 2008-Apr-26 21:50:46 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 21:50:46 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_071" 2008-Apr-26 21:50:46 LOG4 got_cormsg: From DATATAKING: set ra 120803.7 2008-Apr-26 21:50:46 LOG4 got_cormsg: From DATATAKING: set dec 071451.3 2008-Apr-26 21:50:46 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2008-Apr-26 21:50:46 LOG4 got_cormsg: From DATATAKING: 120803.7 2008-Apr-26 21:50:46 LOG4 got_cormsg: From DATATAKING: vw% 071451.3 2008-Apr-26 21:50:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 21:50:46 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-26 21:50:46 LOG4 got_cormsg: From DATATAKING: pnt tr 120803.7 071451.3 -CJ 2008-Apr-26 21:50:46 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-26 21:50:46 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-26 21:50:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 21:50:51 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-26 21:50:51 LOG5 end_task: Level: (4) ID = <10355> Status = 0 0 0 0 ok 2008-Apr-26 21:50:51 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-26 21:50:51 LOG5 begin_task: Level: (4) ID = <10356> Status = 0 0 0 0 ok 2008-Apr-26 21:50:53 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-26 21:50:53 LOG5 end_task: Level: (4) ID = <10356> Status = 0 0 0 0 ok 2008-Apr-26 21:50:53 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-26 21:50:53 INFO2 waittrk: Now tracking AGESVC1A_p2_071 2008-Apr-26 21:50:53 LOG4 waittrk: Current telescope position: Az = 332.30 ZA = 12.45 2008-Apr-26 21:50:53 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-26 21:50:53 LOG5 finish_task: Level: (3) ID = <10354> Status = 0 0 0 0 ok 2008-Apr-26 21:50:53 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-26 21:50:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 21:50:53 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-26 21:50:53 LOG5 end_task: Level: (3) ID = <10354> Status = 0 0 0 0 ok 2008-Apr-26 21:50:53 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-26 21:50:53 LOG5 begin_task: Level: (3) ID = <10357> Status = 0 0 0 0 ok 2008-Apr-26 21:50:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-26 21:50:53 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-26 21:50:53 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-26 21:50:53 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-26 21:50:53 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 21:50:53 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-26 21:50:53 LOG5 begin_task: Level: (4) ID = <10358> Status = 0 0 0 0 ok 2008-Apr-26 21:50:54 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-26 21:50:54 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 21:50:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 21:50:56 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-26 21:50:56 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-26 21:50:56 LOG5 end_task: Level: (4) ID = <10358> Status = 0 0 0 0 ok 2008-Apr-26 21:50:56 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-26 21:50:56 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-26 21:50:56 LOG5 begin_task: Level: (4) ID = <10359> Status = 0 0 0 0 ok 2008-Apr-26 21:50:56 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-26 21:50:56 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-26 21:50:56 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-26 21:50:56 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-26 21:50:56 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-26 21:50:57 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-26 21:50:57 LOG5 begin_task: Level: (5) ID = <10360> Status = 0 0 0 0 ok 2008-Apr-26 21:50:57 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 21:50:57 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-26 21:50:57 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 1 dB --- beam 1: 8 6 dB 2008-Apr-26 21:50:57 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 6 dB 2008-Apr-26 21:50:57 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-26 21:50:57 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 2 3 dB 2008-Apr-26 21:50:57 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-26 21:50:57 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-26 21:50:57 LOG5 end_task: Level: (5) ID = <10360> Status = 0 0 0 0 ok 2008-Apr-26 21:50:57 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.890 1.024 ALFA beam 1: 0.871 1.087 2008-Apr-26 21:50:57 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.036 0.950 ALFA beam 3: 0.978 1.041 2008-Apr-26 21:50:57 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.914 0.963 ALFA beam 5: 0.998 0.906 2008-Apr-26 21:50:57 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.986 1.019 ALFA beam 7: 1.075 0.912 2008-Apr-26 21:50:57 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-26 21:50:57 LOG5 finish_task: Level: (4) ID = <10359> Status = 0 0 0 0 ok 2008-Apr-26 21:50:57 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-26 21:50:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 21:50:57 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-26 21:50:57 LOG5 end_task: Level: (4) ID = <10359> Status = 0 0 0 0 ok 2008-Apr-26 21:50:57 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-26 21:50:57 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-26 21:50:57 LOG5 finish_task: Level: (3) ID = <10357> Status = 0 0 0 0 ok 2008-Apr-26 21:50:57 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-26 21:50:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 21:50:57 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-26 21:50:57 LOG5 end_task: Level: (3) ID = <10357> Status = 0 0 0 0 ok 2008-Apr-26 21:50:57 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 SS 2008-Apr-26 21:50:57 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 SS 2008-Apr-26 21:50:57 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 SS 2008-Apr-26 21:50:57 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 SS 2008-Apr-26 21:50:57 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-26 21:50:57 START begin_task: Starting task 'WAPP calibration' 2008-Apr-26 21:50:57 LOG5 begin_task: Level: (3) ID = <10361> Status = 0 0 0 0 ok 2008-Apr-26 21:50:57 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-26 21:50:57 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-26 21:50:57 START begin_task: Starting task 'selecting calibration type' 2008-Apr-26 21:50:57 LOG5 begin_task: Level: (4) ID = <10362> Status = 0 0 0 0 ok 2008-Apr-26 21:50:57 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-26 21:50:57 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-26 21:50:57 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 21:50:57 START begin_task: Starting task 'waiting on setcal' 2008-Apr-26 21:50:57 LOG5 begin_task: Level: (5) ID = <10363> Status = 0 0 0 0 ok 2008-Apr-26 21:50:57 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 SS' 2008-Apr-26 21:50:58 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-26 21:50:58 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 21:50:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 21:50:58 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-26 21:50:58 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-26 21:50:58 LOG5 end_task: Level: (5) ID = <10363> Status = 0 0 0 0 ok 2008-Apr-26 21:50:58 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-26 21:50:58 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-26 21:50:58 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-26 21:50:58 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-26 21:50:58 LOG5 begin_task: Level: (5) ID = <10364> Status = 0 0 0 0 ok 2008-Apr-26 21:50:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 21:50:58 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-26 21:50:58 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-26 21:50:58 LOG5 end_task: Level: (5) ID = <10364> Status = 0 0 0 0 ok 2008-Apr-26 21:50:58 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-26 21:50:58 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-26 21:50:58 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-26 21:50:58 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-26 21:50:58 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-26 21:50:58 LOG5 begin_task: Level: (5) ID = <10365> Status = 0 0 0 0 ok 2008-Apr-26 21:50:58 NOTE WAPPDATA-new_file: New FITS file: wapp.20080426.a2048.0008.fits 2008-Apr-26 21:50:58 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-26 21:50:58 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-26 21:50:58 LOG5 end_task: Level: (5) ID = <10365> Status = 0 0 0 0 ok 2008-Apr-26 21:50:58 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-26 21:50:58 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-26 21:50:58 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-26 21:50:58 LOG5 finish_task: Level: (4) ID = <10362> Status = 0 0 0 0 ok 2008-Apr-26 21:50:58 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-26 21:50:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 21:50:58 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-26 21:50:58 LOG5 end_task: Level: (4) ID = <10362> Status = 0 0 0 0 ok 2008-Apr-26 21:50:58 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-26 21:50:58 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-26 21:50:58 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-26 21:50:58 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-26 21:50:58 LOG5 begin_task: Level: (4) ID = <10366> Status = 0 0 0 0 ok 2008-Apr-26 21:50:58 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080426.a2048.0008.fits} 2008-Apr-26 21:50:58 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-26 21:50:58 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-26 21:50:58 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-26 21:50:58 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-26 21:50:58 LOG5 end_task: Level: (4) ID = <10366> Status = 0 0 0 0 ok 2008-Apr-26 21:50:58 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-26 21:50:58 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-26 21:50:58 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-26 21:50:58 LOG5 begin_task: Level: (4) ID = <10367> Status = 0 0 0 0 ok 2008-Apr-26 21:50:58 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-26 21:50:58 LOG5 log_alfabeam: Parameters: 12.13436111111111 7.2475833333333339 11.760882 2008.3228210637058 41.899967 2008-Apr-26 21:50:58 LOG4 log_alfabeam: ALFABEAM 0 12.134361111111099 7.247583333333333 2008-Apr-26 21:50:58 LOG4 log_alfabeam: ALFABEAM 1 12.132420807015729 7.349628415639812 2008-Apr-26 21:50:58 LOG4 log_alfabeam: ALFABEAM 2 12.128172537306252 7.282193576361736 2008-Apr-26 21:50:58 LOG4 log_alfabeam: ALFABEAM 3 12.130063420034670 7.179935421755956 2008-Apr-26 21:50:58 LOG4 log_alfabeam: ALFABEAM 4 12.136280935289472 7.145425676747145 2008-Apr-26 21:50:58 LOG4 log_alfabeam: ALFABEAM 5 12.140584255703347 7.213617887262599 2008-Apr-26 21:50:58 LOG4 log_alfabeam: ALFABEAM 6 12.138615072675785 7.315559382506719 2008-Apr-26 21:50:58 INFO2 take_spectra: Starting WAPP scan: 811700475 2008-Apr-26 21:50:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-26 21:50:59 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-26 21:50:59 LOG5 begin_task: Level: (5) ID = <10368> Status = 0 0 0 0 ok 2008-Apr-26 21:50:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-26 21:50:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6660.00 2008-Apr-26 21:51:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.162316 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-26 21:51:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.162316 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-26 21:51:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.162316 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-26 21:51:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.162316 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-26 21:51:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.429 > 1.4)! 2008-Apr-26 21:51:05 LOG4 check_wapp_levels: WAPP-1 power levels: 0.890 1.024 0.871 1.087 2008-Apr-26 21:51:05 LOG4 check_wapp_levels: WAPP-2 power levels: 1.406 1.312 1.355 1.429 2008-Apr-26 21:51:05 LOG4 check_wapp_levels: WAPP-3 power levels: 0.914 0.963 0.998 0.906 2008-Apr-26 21:51:05 LOG4 check_wapp_levels: WAPP-4 power levels: 0.986 1.019 1.075 0.912 2008-Apr-26 21:51:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.162316 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-26 21:51:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.162316 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 21:51:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.162316 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 21:51:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.162316 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 21:51:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.162316 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 21:51:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-26 21:51:05 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-26 21:51:05 LOG5 end_task: Level: (5) ID = <10368> Status = 0 0 0 0 ok 2008-Apr-26 21:51:05 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-26 21:51:05 LOG5 end_task: Level: (4) ID = <10367> Status = 0 0 0 0 ok 2008-Apr-26 21:51:05 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-26 21:51:05 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-26 21:51:05 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-26 21:51:05 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-26 21:51:05 LOG5 begin_task: Level: (4) ID = <10369> Status = 0 0 0 0 ok 2008-Apr-26 21:51:05 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-26 21:51:05 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-26 21:51:05 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-26 21:51:05 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-26 21:51:05 LOG5 end_task: Level: (4) ID = <10369> Status = 0 0 0 0 ok 2008-Apr-26 21:51:05 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-26 21:51:05 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-26 21:51:05 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-26 21:51:05 LOG5 begin_task: Level: (4) ID = <10370> Status = 0 0 0 0 ok 2008-Apr-26 21:51:05 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-26 21:51:05 LOG5 log_alfabeam: Parameters: 12.13436111111111 7.2475833333333339 11.762832 2008.3228212855224 41.899967 2008-Apr-26 21:51:05 LOG4 log_alfabeam: ALFABEAM 0 12.134361111111101 7.247583333333329 2008-Apr-26 21:51:05 LOG4 log_alfabeam: ALFABEAM 1 12.132434513196950 7.349685872423249 2008-Apr-26 21:51:05 LOG4 log_alfabeam: ALFABEAM 2 12.128177217407533 7.282377947220729 2008-Apr-26 21:51:05 LOG4 log_alfabeam: ALFABEAM 3 12.130054317387509 7.180063581585437 2008-Apr-26 21:51:05 LOG4 log_alfabeam: ALFABEAM 4 12.136267199384859 7.145368713566556 2008-Apr-26 21:51:05 LOG4 log_alfabeam: ALFABEAM 5 12.140579697737298 7.213433183079188 2008-Apr-26 21:51:05 LOG4 log_alfabeam: ALFABEAM 6 12.138624173767752 7.315432878486924 2008-Apr-26 21:51:05 INFO2 take_spectra: Starting WAPP scan: 811700476 2008-Apr-26 21:51:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-26 21:51:06 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-26 21:51:06 LOG5 begin_task: Level: (5) ID = <10371> Status = 0 0 0 0 ok 2008-Apr-26 21:51:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-26 21:51:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6667.00 2008-Apr-26 21:51:11 INFO5 check_wapp_levels: WAPP power levels are between 1.181 and 1.520 (still bad) 2008-Apr-26 21:51:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.162316 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-26 21:51:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.162316 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-26 21:51:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.162316 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-26 21:51:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.162316 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-26 21:51:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.162316 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-26 21:51:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.162316 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 21:51:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.162316 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 21:51:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.162316 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 21:51:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.162316 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 21:51:12 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-26 21:51:12 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-26 21:51:12 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-26 21:51:12 LOG5 end_task: Level: (5) ID = <10371> Status = 0 0 0 0 ok 2008-Apr-26 21:51:12 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-26 21:51:12 LOG5 end_task: Level: (4) ID = <10370> Status = 0 0 0 0 ok 2008-Apr-26 21:51:12 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-26 21:51:12 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-26 21:51:12 LOG5 finish_task: Level: (3) ID = <10361> Status = 0 0 0 0 ok 2008-Apr-26 21:51:12 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-26 21:51:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 21:51:12 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-26 21:51:12 LOG5 end_task: Level: (3) ID = <10361> Status = 0 0 0 0 ok 2008-Apr-26 21:51:12 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-26 21:51:12 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 332.61 and ZA = 12.48 2008-Apr-26 21:51:12 LOG3 track_source: Calling 'track_source AGESVC1A_p2_071 332.61 12.4784419935 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-26 21:51:12 START begin_task: Starting task 'sending tracking commands' 2008-Apr-26 21:51:12 LOG5 begin_task: Level: (3) ID = <10372> Status = 0 0 0 0 ok 2008-Apr-26 21:51:12 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_071} INFO {Slewing to source 'AGESVC1A_p2_071' ...} 2008-Apr-26 21:51:12 INFO1 track_source: Starting to track AGESVC1A_p2_071 2008-Apr-26 21:51:12 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_071" 2008-Apr-26 21:51:12 LOG3 vw_send: To DATATAKING: set ra 332.61 2008-Apr-26 21:51:12 LOG3 vw_send: To DATATAKING: set dec 12.4784419935 2008-Apr-26 21:51:12 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-26 21:51:12 LOG3 vw_send: To DATATAKING: pnt tr 332.61 12.4784419935 -CF 2008-Apr-26 21:51:12 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-26 21:51:12 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-26 21:51:12 LOG5 finish_task: Level: (3) ID = <10372> Status = 0 0 0 0 ok 2008-Apr-26 21:51:12 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-26 21:51:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 21:51:13 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-26 21:51:13 LOG5 end_task: Level: (3) ID = <10372> Status = 0 0 0 0 ok 2008-Apr-26 21:51:13 LOG1 fixed_driftmap: Parameters: HA = -00:23:00.1 Start = 11:46:27.1 LST = 11:45:53.2 diff = 33.9 secs 2008-Apr-26 21:51:13 INFO2 fixed_driftmap: Waiting 31.9 seconds for RA 12:09:27 2008-Apr-26 21:51:13 INFO2 lstwait: Waiting for 31.8 secs from LST 11:45:53 to LST 11:46:25 ... 2008-Apr-26 21:51:13 LOG4 send_obs_status: To obs_status: <1> TASKTIME 31.801532084596918 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-26 21:51:13 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-26 21:51:13 LOG5 begin_task: Level: (3) ID = <10373> Status = 0 0 0 0 ok 2008-Apr-26 21:51:13 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_071" 2008-Apr-26 21:51:13 LOG4 got_cormsg: From DATATAKING: set ra 332.61 2008-Apr-26 21:51:13 LOG4 got_cormsg: From DATATAKING: set dec 12.4784419935 2008-Apr-26 21:51:13 LOG4 got_cormsg: From DATATAKING: vw% 332.61 2008-Apr-26 21:51:13 LOG4 got_cormsg: From DATATAKING: vw% 12.4784419935 2008-Apr-26 21:51:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 21:51:13 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-26 21:51:13 LOG4 got_cormsg: From DATATAKING: pnt tr 332.61 12.4784419935 -CF 2008-Apr-26 21:51:13 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-26 21:51:13 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2008-Apr-26 21:51:17 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.874 and 1.087 2008-Apr-26 21:51:44 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-26 21:51:44 LOG5 end_task: Level: (3) ID = <10373> Status = 0 0 0 0 ok 2008-Apr-26 21:51:44 LOG4 lstwait: Finished waiting, the gui caused difference: 0.20179927999990355 2008-Apr-26 21:51:44 INFO3 lstwait: Finished waiting 2008-Apr-26 21:51:44 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-26 21:51:44 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-26 21:51:45 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-26 21:51:45 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-26 21:51:45 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-26 21:51:45 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-26 21:51:45 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-26 21:51:45 LOG5 begin_task: Level: (3) ID = <10374> Status = 0 0 0 0 ok 2008-Apr-26 21:51:45 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-26 21:51:45 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-26 21:51:45 INFO2 take_spectra: Starting WAPP scan: 811700477 2008-Apr-26 21:51:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-26 21:51:45 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-26 21:51:45 LOG5 begin_task: Level: (4) ID = <10375> Status = 0 0 0 0 ok 2008-Apr-26 21:51:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-26 21:51:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6706.00 2008-Apr-26 21:51:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.162316 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-26 21:51:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.162316 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-26 21:51:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.162316 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-26 21:51:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.162316 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-26 21:51:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.162316 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-26 21:51:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.162316 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 21:51:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.162316 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 21:51:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.162316 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 21:51:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.162316 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 22:11:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-26 22:11:46 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-26 22:11:46 LOG5 end_task: Level: (4) ID = <10375> Status = 0 0 0 0 ok 2008-Apr-26 22:11:46 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-26 22:11:46 LOG5 end_task: Level: (3) ID = <10374> Status = 0 0 0 0 ok 2008-Apr-26 22:11:46 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-26 22:11:46 LOG5 finish_task: Level: (2) ID = <10341> Status = 0 0 0 0 ok 2008-Apr-26 22:11:46 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-26 22:11:46 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-26 22:11:46 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-26 22:11:46 LOG5 end_task: Level: (2) ID = <10341> Status = 0 0 0 0 ok 2008-Apr-26 22:11:46 COMMAND run_command_line: EXECUTING command 39: 'FIXEDDRIFT az=0.00 alfaangle=19.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_073 ra=120900.00 dec=71200.00' 2008-Apr-26 22:11:46 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-26 22:11:47 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-26 22:11:47 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 0.00 19.1 hcorcal 5 tracking no first 1 AGESVC1A_p2_073 120900.00 71200.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-26 22:11:47 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-26 22:11:47 LOG5 begin_task: Level: (2) ID = <10376> Status = 0 0 0 0 ok 2008-Apr-26 22:11:47 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGESVC1A_p2_071' 2008-Apr-26 22:11:47 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-26 22:11:47 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1A_p2_073} 2008-Apr-26 22:11:47 INFO3 fixed_driftmap: Sending telescope to Az = 0.00 and ZA = 11.20 2008-Apr-26 22:11:47 LOG3 track_source: Calling 'track_source AGESVC1A_p2_073 0.00 11.2025369362 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-26 22:11:47 START begin_task: Starting task 'sending tracking commands' 2008-Apr-26 22:11:47 LOG5 begin_task: Level: (3) ID = <10377> Status = 0 0 0 0 ok 2008-Apr-26 22:11:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_073} INFO {Slewing to source 'AGESVC1A_p2_073' ...} 2008-Apr-26 22:11:47 INFO1 track_source: Starting to track AGESVC1A_p2_073 2008-Apr-26 22:11:47 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_073" 2008-Apr-26 22:11:47 LOG3 vw_send: To DATATAKING: set ra 0.00 2008-Apr-26 22:11:47 LOG3 vw_send: To DATATAKING: set dec 11.2025369362 2008-Apr-26 22:11:47 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-26 22:11:47 LOG3 vw_send: To DATATAKING: pnt tr 0.00 11.2025369362 -CF 2008-Apr-26 22:11:47 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-26 22:11:47 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-26 22:11:47 LOG5 finish_task: Level: (3) ID = <10377> Status = 0 0 0 0 ok 2008-Apr-26 22:11:47 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-26 22:11:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 22:11:47 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-26 22:11:47 LOG5 end_task: Level: (3) ID = <10377> Status = 0 0 0 0 ok 2008-Apr-26 22:11:47 START begin_task: Starting task 'rotate ALFA to +19.1 degrees' 2008-Apr-26 22:11:47 LOG5 begin_task: Level: (3) ID = <10378> Status = 0 0 0 0 ok 2008-Apr-26 22:11:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19.1 degrees ...} 2008-Apr-26 22:11:47 INFO2 rotate_alfa: ALFA commanded to +19.1 degrees 2008-Apr-26 22:11:47 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19.1 REPLY 2008-Apr-26 22:11:47 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-26 22:11:47 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-26 22:11:47 LOG5 begin_task: Level: (4) ID = <10379> Status = 0 0 0 0 ok 2008-Apr-26 22:11:47 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_073" 2008-Apr-26 22:11:47 LOG4 got_cormsg: From DATATAKING: set ra 0.00 2008-Apr-26 22:11:47 LOG4 got_cormsg: From DATATAKING: set dec 11.2025369362 2008-Apr-26 22:11:47 LOG4 got_cormsg: From DATATAKING: vw% 0.00 2008-Apr-26 22:11:47 LOG4 got_cormsg: From DATATAKING: vw% 11.2025369362 2008-Apr-26 22:11:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 22:11:47 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-26 22:11:47 LOG4 got_cormsg: From DATATAKING: pnt tr 0.00 11.2025369362 -CF 2008-Apr-26 22:11:47 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-26 22:11:47 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-26 22:11:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 22:12:01 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-26 22:12:01 INFO3 alfa_motor: ALFA rotator in-position +19.10 degrees 2008-Apr-26 22:12:01 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-26 22:12:01 LOG5 end_task: Level: (4) ID = <10379> Status = 0 0 0 0 ok 2008-Apr-26 22:12:01 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-26 22:12:01 STOP finish_task: Finishing task 'rotate ALFA to +19.1 degrees' 2008-Apr-26 22:12:01 LOG5 finish_task: Level: (3) ID = <10378> Status = 0 0 0 0 ok 2008-Apr-26 22:12:01 INFO2 finish_task: DONE finished configuration: rotating ALFA to +19.1 degrees 2008-Apr-26 22:12:01 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 22:12:01 STOP end_task: Finishing task 'rotate ALFA to +19.1 degrees' with status 'OK' 2008-Apr-26 22:12:01 LOG5 end_task: Level: (3) ID = <10378> Status = 0 0 0 0 ok 2008-Apr-26 22:12:01 START begin_task: Starting task 'waiting on telescope' 2008-Apr-26 22:12:01 LOG5 begin_task: Level: (3) ID = <10380> Status = 0 0 0 0 ok 2008-Apr-26 22:12:01 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-26 22:12:01 LOG3 waittrk: Start waittrk 5 2008-Apr-26 22:12:01 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-26 22:12:01 LOG5 begin_task: Level: (4) ID = <10381> Status = 0 0 0 0 ok 2008-Apr-26 22:12:06 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-26 22:12:06 LOG5 end_task: Level: (4) ID = <10381> Status = 0 0 0 0 ok 2008-Apr-26 22:12:06 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-26 22:12:06 LOG5 begin_task: Level: (4) ID = <10382> Status = 0 0 0 0 ok 2008-Apr-26 22:13:08 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-26 22:13:08 LOG5 end_task: Level: (4) ID = <10382> Status = 0 0 0 0 ok 2008-Apr-26 22:13:08 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-26 22:13:08 INFO2 waittrk: Now tracking AGESVC1A_p2_073 2008-Apr-26 22:13:08 LOG4 waittrk: Current telescope position: Az = 359.64 ZA = 11.17 2008-Apr-26 22:13:08 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-26 22:13:08 LOG5 finish_task: Level: (3) ID = <10380> Status = 0 0 0 0 ok 2008-Apr-26 22:13:08 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-26 22:13:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 22:13:08 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-26 22:13:08 LOG5 end_task: Level: (3) ID = <10380> Status = 0 0 0 0 ok 2008-Apr-26 22:13:08 START begin_task: Starting task 'selecting calibration type' 2008-Apr-26 22:13:08 LOG5 begin_task: Level: (3) ID = <10383> Status = 0 0 0 0 ok 2008-Apr-26 22:13:08 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-26 22:13:08 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-26 22:13:08 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 22:13:08 START begin_task: Starting task 'waiting on setcal' 2008-Apr-26 22:13:08 LOG5 begin_task: Level: (4) ID = <10384> Status = 0 0 0 0 ok 2008-Apr-26 22:13:08 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-26 22:13:08 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 22:13:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 22:13:09 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-26 22:13:09 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-26 22:13:09 LOG5 end_task: Level: (4) ID = <10384> Status = 0 0 0 0 ok 2008-Apr-26 22:13:09 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-26 22:13:09 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-26 22:13:09 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-26 22:13:09 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-26 22:13:09 LOG5 begin_task: Level: (4) ID = <10385> Status = 0 0 0 0 ok 2008-Apr-26 22:13:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 22:13:10 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-26 22:13:10 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-26 22:13:10 LOG5 end_task: Level: (4) ID = <10385> Status = 0 0 0 0 ok 2008-Apr-26 22:13:10 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-26 22:13:10 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-26 22:13:10 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-26 22:13:10 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-26 22:13:10 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-26 22:13:10 LOG5 begin_task: Level: (4) ID = <10386> Status = 0 0 0 0 ok 2008-Apr-26 22:13:10 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-26 22:13:10 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-26 22:13:10 LOG5 end_task: Level: (4) ID = <10386> Status = 0 0 0 0 ok 2008-Apr-26 22:13:10 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-26 22:13:10 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-26 22:13:10 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-26 22:13:10 LOG5 finish_task: Level: (3) ID = <10383> Status = 0 0 0 0 ok 2008-Apr-26 22:13:10 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-26 22:13:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 22:13:10 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-26 22:13:10 LOG5 end_task: Level: (3) ID = <10383> Status = 0 0 0 0 ok 2008-Apr-26 22:13:10 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2008-Apr-26 22:13:10 INFO2 astwait: Waiting for 32 seconds from 02:13:10 to 02:13:42 UTC ... 2008-Apr-26 22:13:10 LOG4 send_obs_status: To obs_status: <1> TASKTIME 32 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-26 22:13:10 START begin_task: Starting task 'waiting on waiting for AST time' 2008-Apr-26 22:13:10 LOG5 begin_task: Level: (3) ID = <10387> Status = 0 0 0 0 ok 2008-Apr-26 22:13:42 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2008-Apr-26 22:13:42 LOG5 end_task: Level: (3) ID = <10387> Status = 0 0 0 0 ok 2008-Apr-26 22:13:42 INFO3 astwait: Finished waiting 2008-Apr-26 22:13:42 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-26 22:13:42 LOG5 dopset_later: Calling 'dopset_later 61.096534575143764' 2008-Apr-26 22:13:42 INFO3 dopset_later: Setting Doppler correction for 22:14:42 (61.1 seconds from now) 2008-Apr-26 22:13:42 LOG5 antvel: Calling 'antvel 0.000000 11.202537 F 61.096534575143764' 2008-Apr-26 22:13:42 LOG2 antvel: Parameters to Doppler: Heliocentric 94482 2008 117 0.0 2008-Apr-26 22:13:42 INFO5 antvel: Computed antenna velocity: +17.64985 km/s 2008-Apr-26 22:13:42 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=17.6498511964 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-26 22:13:42 INFO4 dopset_gen: New sky frequencies: 1381.162115 1381.162115 1381.162115 1381.162115 1381.162115 1381.162115 1381.162115 1381.162115 1381.162115 2008-Apr-26 22:13:42 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.162115 sky0=1381.162115 sky1=1381.162115 sky2=1381.162115 sky3=1381.162115 sky4=1381.162115 sky5=1381.162115 sky6=1381.162115 sky7=1381.162115 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-26 22:13:42 LOG2 dopset_gen: Result from 'sky2syn': 1631.162115 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-26 22:13:42 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631162115.0} 2008-Apr-26 22:13:42 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 22:13:42 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-26 22:13:42 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-26 22:13:42 INFO5 fixed_driftmap: Tracking J2000 position: RA = 12:08:03.4 Dec = +07:11:51.3 2008-Apr-26 22:13:42 LOG3 track_source: Calling 'track_source AGESVC1A_p2_073 120803.4 071151.3 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-26 22:13:42 START begin_task: Starting task 'sending tracking commands' 2008-Apr-26 22:13:42 LOG5 begin_task: Level: (3) ID = <10388> Status = 0 0 0 0 ok 2008-Apr-26 22:13:42 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_073} INFO {Slewing to source 'AGESVC1A_p2_073' ...} 2008-Apr-26 22:13:42 INFO1 track_source: Starting to track AGESVC1A_p2_073 2008-Apr-26 22:13:42 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_073" 2008-Apr-26 22:13:42 LOG3 vw_send: To DATATAKING: set ra 120803.4 2008-Apr-26 22:13:42 LOG3 vw_send: To DATATAKING: set dec 071151.3 2008-Apr-26 22:13:42 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-26 22:13:42 LOG3 vw_send: To DATATAKING: pnt tr 120803.4 071151.3 -CJ 2008-Apr-26 22:13:42 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-26 22:13:42 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-26 22:13:42 LOG5 finish_task: Level: (3) ID = <10388> Status = 0 0 0 0 ok 2008-Apr-26 22:13:42 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-26 22:13:42 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 22:13:42 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-26 22:13:42 LOG5 end_task: Level: (3) ID = <10388> Status = 0 0 0 0 ok 2008-Apr-26 22:13:42 START begin_task: Starting task 'waiting on telescope' 2008-Apr-26 22:13:42 LOG5 begin_task: Level: (3) ID = <10389> Status = 0 0 0 0 ok 2008-Apr-26 22:13:42 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-26 22:13:42 LOG3 waittrk: Start waittrk 5 2008-Apr-26 22:13:42 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-26 22:13:42 LOG5 begin_task: Level: (4) ID = <10390> Status = 0 0 0 0 ok 2008-Apr-26 22:13:42 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631162115.0} 2008-Apr-26 22:13:42 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 22:13:42 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-26 22:13:42 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_073" 2008-Apr-26 22:13:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 22:13:42 LOG4 got_cormsg: From DATATAKING: set ra 120803.4 2008-Apr-26 22:13:42 LOG4 got_cormsg: From DATATAKING: set dec 071151.3 2008-Apr-26 22:13:42 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-26 22:13:42 LOG4 got_cormsg: From DATATAKING: pnt tr 120803.4 071151.3 -CJ 2008-Apr-26 22:13:42 LOG4 got_cormsg: From DATATAKING: 120803.4 2008-Apr-26 22:13:42 LOG4 got_cormsg: From DATATAKING: vw% 071151.3 2008-Apr-26 22:13:42 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2008-Apr-26 22:13:42 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-26 22:13:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 22:13:47 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-26 22:13:47 LOG5 end_task: Level: (4) ID = <10390> Status = 0 0 0 0 ok 2008-Apr-26 22:13:47 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-26 22:13:47 LOG5 begin_task: Level: (4) ID = <10391> Status = 0 0 0 0 ok 2008-Apr-26 22:13:49 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-26 22:13:49 LOG5 end_task: Level: (4) ID = <10391> Status = 0 0 0 0 ok 2008-Apr-26 22:13:49 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-26 22:13:49 INFO2 waittrk: Now tracking AGESVC1A_p2_073 2008-Apr-26 22:13:49 LOG4 waittrk: Current telescope position: Az = 359.73 ZA = 11.17 2008-Apr-26 22:13:49 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-26 22:13:49 LOG5 finish_task: Level: (3) ID = <10389> Status = 0 0 0 0 ok 2008-Apr-26 22:13:49 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-26 22:13:49 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 22:13:49 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-26 22:13:49 LOG5 end_task: Level: (3) ID = <10389> Status = 0 0 0 0 ok 2008-Apr-26 22:13:49 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-26 22:13:49 LOG5 begin_task: Level: (3) ID = <10392> Status = 0 0 0 0 ok 2008-Apr-26 22:13:49 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-26 22:13:49 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-26 22:13:49 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-26 22:13:49 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-26 22:13:49 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 22:13:49 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-26 22:13:49 LOG5 begin_task: Level: (4) ID = <10393> Status = 0 0 0 0 ok 2008-Apr-26 22:13:50 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-26 22:13:50 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 22:13:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 22:13:51 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-26 22:13:51 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-26 22:13:51 LOG5 end_task: Level: (4) ID = <10393> Status = 0 0 0 0 ok 2008-Apr-26 22:13:51 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-26 22:13:51 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-26 22:13:51 LOG5 begin_task: Level: (4) ID = <10394> Status = 0 0 0 0 ok 2008-Apr-26 22:13:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-26 22:13:51 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-26 22:13:51 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-26 22:13:51 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-26 22:13:51 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-26 22:13:51 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-26 22:13:51 LOG5 begin_task: Level: (5) ID = <10395> Status = 0 0 0 0 ok 2008-Apr-26 22:13:51 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-26 22:13:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 22:13:51 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 1 dB --- beam 1: 7 6 dB 2008-Apr-26 22:13:51 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 5 dB 2008-Apr-26 22:13:51 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-26 22:13:52 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 2 3 dB 2008-Apr-26 22:13:52 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-26 22:13:52 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-26 22:13:52 LOG5 end_task: Level: (5) ID = <10395> Status = 0 0 0 0 ok 2008-Apr-26 22:13:52 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.110 1.021 ALFA beam 1: 1.111 1.077 2008-Apr-26 22:13:52 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.006 0.936 ALFA beam 3: 0.957 1.038 2008-Apr-26 22:13:52 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.911 0.953 ALFA beam 5: 1.000 1.138 2008-Apr-26 22:13:52 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.999 1.023 ALFA beam 7: 1.089 0.912 2008-Apr-26 22:13:52 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-26 22:13:52 LOG5 finish_task: Level: (4) ID = <10394> Status = 0 0 0 0 ok 2008-Apr-26 22:13:52 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-26 22:13:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 22:13:52 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-26 22:13:52 LOG5 end_task: Level: (4) ID = <10394> Status = 0 0 0 0 ok 2008-Apr-26 22:13:52 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-26 22:13:52 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-26 22:13:52 LOG5 finish_task: Level: (3) ID = <10392> Status = 0 0 0 0 ok 2008-Apr-26 22:13:52 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-26 22:13:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 22:13:52 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-26 22:13:52 LOG5 end_task: Level: (3) ID = <10392> Status = 0 0 0 0 ok 2008-Apr-26 22:13:52 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 SS 2008-Apr-26 22:13:52 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 SS 2008-Apr-26 22:13:52 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 SS 2008-Apr-26 22:13:52 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 SS 2008-Apr-26 22:13:52 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-26 22:13:52 START begin_task: Starting task 'WAPP calibration' 2008-Apr-26 22:13:52 LOG5 begin_task: Level: (3) ID = <10396> Status = 0 0 0 0 ok 2008-Apr-26 22:13:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-26 22:13:52 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-26 22:13:52 START begin_task: Starting task 'selecting calibration type' 2008-Apr-26 22:13:52 LOG5 begin_task: Level: (4) ID = <10397> Status = 0 0 0 0 ok 2008-Apr-26 22:13:52 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-26 22:13:52 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-26 22:13:52 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 22:13:52 START begin_task: Starting task 'waiting on setcal' 2008-Apr-26 22:13:52 LOG5 begin_task: Level: (5) ID = <10398> Status = 0 0 0 0 ok 2008-Apr-26 22:13:52 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 SS' 2008-Apr-26 22:13:52 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-26 22:13:52 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 22:13:52 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 22:13:52 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-26 22:13:52 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-26 22:13:52 LOG5 end_task: Level: (5) ID = <10398> Status = 0 0 0 0 ok 2008-Apr-26 22:13:52 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-26 22:13:52 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-26 22:13:52 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-26 22:13:52 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-26 22:13:52 LOG5 begin_task: Level: (5) ID = <10399> Status = 0 0 0 0 ok 2008-Apr-26 22:13:52 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 22:13:52 NOTE WAPPDATA-new_file: New FITS file: wapp.20080426.a2048.0009.fits 2008-Apr-26 22:13:52 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080426.a2048.0009.fits} 2008-Apr-26 22:13:54 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-26 22:13:54 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-26 22:13:54 LOG5 end_task: Level: (5) ID = <10399> Status = 0 0 0 0 ok 2008-Apr-26 22:13:54 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-26 22:13:54 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-26 22:13:54 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-26 22:13:54 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-26 22:13:54 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-26 22:13:54 LOG5 begin_task: Level: (5) ID = <10400> Status = 0 0 0 0 ok 2008-Apr-26 22:13:54 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-26 22:13:54 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-26 22:13:54 LOG5 end_task: Level: (5) ID = <10400> Status = 0 0 0 0 ok 2008-Apr-26 22:13:54 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-26 22:13:54 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-26 22:13:54 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-26 22:13:54 LOG5 finish_task: Level: (4) ID = <10397> Status = 0 0 0 0 ok 2008-Apr-26 22:13:54 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-26 22:13:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 22:13:54 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-26 22:13:54 LOG5 end_task: Level: (4) ID = <10397> Status = 0 0 0 0 ok 2008-Apr-26 22:13:54 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-26 22:13:54 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-26 22:13:54 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-26 22:13:54 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-26 22:13:54 LOG5 begin_task: Level: (4) ID = <10401> Status = 0 0 0 0 ok 2008-Apr-26 22:13:54 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-26 22:13:54 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-26 22:13:54 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-26 22:13:54 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-26 22:13:54 LOG5 end_task: Level: (4) ID = <10401> Status = 0 0 0 0 ok 2008-Apr-26 22:13:54 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-26 22:13:54 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-26 22:13:54 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-26 22:13:54 LOG5 begin_task: Level: (4) ID = <10402> Status = 0 0 0 0 ok 2008-Apr-26 22:13:54 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-26 22:13:54 LOG5 log_alfabeam: Parameters: 12.134277777777775 7.1975833333333341 12.143872 2008.3228646348266 19.099895 2008-Apr-26 22:13:54 LOG4 log_alfabeam: ALFABEAM 0 12.134277777778525 7.197583333333340 2008-Apr-26 22:13:54 LOG4 log_alfabeam: ALFABEAM 1 12.133149495950281 7.302394349438416 2008-Apr-26 22:13:54 LOG4 log_alfabeam: ALFABEAM 2 12.128498922491175 7.233083976849317 2008-Apr-26 22:13:54 LOG4 log_alfabeam: ALFABEAM 3 12.129592359544008 7.128174106032198 2008-Apr-26 22:13:54 LOG4 log_alfabeam: ALFABEAM 4 12.135426980750658 7.092796982466267 2008-Apr-26 22:13:54 LOG4 log_alfabeam: ALFABEAM 5 12.140091580577153 7.162722014444613 2008-Apr-26 22:13:54 LOG4 log_alfabeam: ALFABEAM 6 12.138907571077770 7.267405356314631 2008-Apr-26 22:13:54 INFO2 take_spectra: Starting WAPP scan: 811700478 2008-Apr-26 22:13:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-26 22:13:54 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-26 22:13:54 LOG5 begin_task: Level: (5) ID = <10403> Status = 0 0 0 0 ok 2008-Apr-26 22:13:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-26 22:13:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8035.00 2008-Apr-26 22:14:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.162115 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-26 22:14:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.162115 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-26 22:14:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.162115 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-26 22:14:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.162115 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-26 22:14:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.162115 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-26 22:14:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.162115 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 22:14:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.162115 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 22:14:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.162115 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 22:14:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.162115 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 22:14:00 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-26 22:14:00 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-26 22:14:00 LOG5 end_task: Level: (5) ID = <10403> Status = 0 0 0 0 ok 2008-Apr-26 22:14:00 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-26 22:14:00 LOG5 end_task: Level: (4) ID = <10402> Status = 0 0 0 0 ok 2008-Apr-26 22:14:00 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-26 22:14:00 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-26 22:14:00 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-26 22:14:00 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-26 22:14:00 LOG5 begin_task: Level: (4) ID = <10404> Status = 0 0 0 0 ok 2008-Apr-26 22:14:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.558 > 1.4)! 2008-Apr-26 22:14:00 LOG4 check_wapp_levels: WAPP-1 power levels: 1.558 1.306 1.506 1.451 2008-Apr-26 22:14:00 LOG4 check_wapp_levels: WAPP-2 power levels: 1.378 1.293 1.332 1.424 2008-Apr-26 22:14:00 LOG4 check_wapp_levels: WAPP-3 power levels: 1.277 1.329 1.399 1.531 2008-Apr-26 22:14:00 LOG4 check_wapp_levels: WAPP-4 power levels: 1.408 1.431 1.533 1.276 2008-Apr-26 22:14:00 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-26 22:14:00 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-26 22:14:00 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-26 22:14:00 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-26 22:14:00 LOG5 end_task: Level: (4) ID = <10404> Status = 0 0 0 0 ok 2008-Apr-26 22:14:00 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-26 22:14:00 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-26 22:14:00 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-26 22:14:00 LOG5 begin_task: Level: (4) ID = <10405> Status = 0 0 0 0 ok 2008-Apr-26 22:14:00 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-26 22:14:00 LOG5 log_alfabeam: Parameters: 12.134277777777775 7.1975833333333341 12.145822 2008.3228648566433 19.099895 2008-Apr-26 22:14:00 LOG4 log_alfabeam: ALFABEAM 0 12.134277777778093 7.197583333333333 2008-Apr-26 22:14:00 LOG4 log_alfabeam: ALFABEAM 1 12.133167068346189 7.302435899663132 2008-Apr-26 22:14:00 LOG4 log_alfabeam: ALFABEAM 2 12.128504888801205 7.233298345909354 2008-Apr-26 22:14:00 LOG4 log_alfabeam: ALFABEAM 3 12.129580743229011 7.128348219531844 2008-Apr-26 22:14:00 LOG4 log_alfabeam: ALFABEAM 4 12.135409420179759 7.092754655234441 2008-Apr-26 22:14:00 LOG4 log_alfabeam: ALFABEAM 5 12.140085719050886 7.162506338619574 2008-Apr-26 22:14:00 LOG4 log_alfabeam: ALFABEAM 6 12.138919259202559 7.267233301001848 2008-Apr-26 22:14:00 INFO2 take_spectra: Starting WAPP scan: 811700479 2008-Apr-26 22:14:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-26 22:14:01 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-26 22:14:01 LOG5 begin_task: Level: (5) ID = <10406> Status = 0 0 0 0 ok 2008-Apr-26 22:14:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-26 22:14:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8042.00 2008-Apr-26 22:14:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.162115 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-26 22:14:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.162115 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-26 22:14:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.162115 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-26 22:14:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.162115 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-26 22:14:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.162115 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-26 22:14:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.162115 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 22:14:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.162115 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 22:14:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.162115 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 22:14:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.162115 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 22:14:07 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-26 22:14:07 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-26 22:14:07 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-26 22:14:07 LOG5 end_task: Level: (5) ID = <10406> Status = 0 0 0 0 ok 2008-Apr-26 22:14:07 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-26 22:14:07 LOG5 end_task: Level: (4) ID = <10405> Status = 0 0 0 0 ok 2008-Apr-26 22:14:07 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-26 22:14:07 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-26 22:14:07 LOG5 finish_task: Level: (3) ID = <10396> Status = 0 0 0 0 ok 2008-Apr-26 22:14:07 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-26 22:14:07 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 22:14:07 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-26 22:14:07 LOG5 end_task: Level: (3) ID = <10396> Status = 0 0 0 0 ok 2008-Apr-26 22:14:07 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-26 22:14:07 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 0.00 and ZA = 11.20 2008-Apr-26 22:14:07 LOG3 track_source: Calling 'track_source AGESVC1A_p2_073 0.00 11.2025369362 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-26 22:14:07 START begin_task: Starting task 'sending tracking commands' 2008-Apr-26 22:14:07 LOG5 begin_task: Level: (3) ID = <10407> Status = 0 0 0 0 ok 2008-Apr-26 22:14:07 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_073} INFO {Slewing to source 'AGESVC1A_p2_073' ...} 2008-Apr-26 22:14:07 INFO1 track_source: Starting to track AGESVC1A_p2_073 2008-Apr-26 22:14:07 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_073" 2008-Apr-26 22:14:07 LOG3 vw_send: To DATATAKING: set ra 0.00 2008-Apr-26 22:14:07 LOG3 vw_send: To DATATAKING: set dec 11.2025369362 2008-Apr-26 22:14:07 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-26 22:14:07 LOG3 vw_send: To DATATAKING: pnt tr 0.00 11.2025369362 -CF 2008-Apr-26 22:14:07 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-26 22:14:07 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-26 22:14:07 LOG5 finish_task: Level: (3) ID = <10407> Status = 0 0 0 0 ok 2008-Apr-26 22:14:07 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-26 22:14:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 22:14:08 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-26 22:14:08 LOG5 end_task: Level: (3) ID = <10407> Status = 0 0 0 0 ok 2008-Apr-26 22:14:08 LOG1 fixed_driftmap: Parameters: HA = +00:00:00.0 Start = 12:09:27.2 LST = 12:08:52.0 diff = 35.2 secs 2008-Apr-26 22:14:08 INFO2 fixed_driftmap: Waiting 33.2 seconds for RA 12:09:27 2008-Apr-26 22:14:08 INFO2 lstwait: Waiting for 33.1 secs from LST 12:08:52 to LST 12:09:25 ... 2008-Apr-26 22:14:08 LOG4 send_obs_status: To obs_status: <1> TASKTIME 33.101980179624356 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-26 22:14:08 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-26 22:14:08 LOG5 begin_task: Level: (3) ID = <10408> Status = 0 0 0 0 ok 2008-Apr-26 22:14:08 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_073" 2008-Apr-26 22:14:08 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.910 and 1.136 2008-Apr-26 22:14:08 LOG4 got_cormsg: From DATATAKING: set ra 0.00 2008-Apr-26 22:14:08 LOG4 got_cormsg: From DATATAKING: set dec 11.2025369362 2008-Apr-26 22:14:08 LOG4 got_cormsg: From DATATAKING: vw% 0.00 2008-Apr-26 22:14:08 LOG4 got_cormsg: From DATATAKING: vw% 11.2025369362 2008-Apr-26 22:14:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 22:14:08 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-26 22:14:08 LOG4 got_cormsg: From DATATAKING: pnt tr 0.00 11.2025369362 -CF 2008-Apr-26 22:14:08 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-26 22:14:08 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-26 22:14:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 22:14:41 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-26 22:14:41 LOG5 end_task: Level: (3) ID = <10408> Status = 0 0 0 0 ok 2008-Apr-26 22:14:41 LOG4 lstwait: Finished waiting, the gui caused difference: -0.10500928000425347 2008-Apr-26 22:14:41 INFO3 lstwait: Finished waiting 2008-Apr-26 22:14:41 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-26 22:14:41 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-26 22:14:41 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-26 22:14:41 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-26 22:14:41 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-26 22:14:41 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-26 22:14:41 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-26 22:14:41 LOG5 begin_task: Level: (3) ID = <10409> Status = 0 0 0 0 ok 2008-Apr-26 22:14:41 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-26 22:14:41 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-26 22:14:41 INFO2 take_spectra: Starting WAPP scan: 811700480 2008-Apr-26 22:14:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-26 22:14:41 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-26 22:14:41 LOG5 begin_task: Level: (4) ID = <10410> Status = 0 0 0 0 ok 2008-Apr-26 22:14:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-26 22:14:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8082.00 2008-Apr-26 22:14:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.162115 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-26 22:14:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.162115 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-26 22:14:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.162115 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-26 22:14:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.162115 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-26 22:14:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.162115 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-26 22:14:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.162115 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 22:14:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.162115 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 22:14:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.162115 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 22:14:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.162115 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 22:20:01 WARNING WAPP=1-chip_count: WARNING counts don't match between chip 0 and chip 1 (99999963 != 99999962)! 2008-Apr-26 22:20:01 WARNING WAPP=2-chip_count: WARNING counts don't match between chip 0 and chip 2 (99999947 != 99999946)! 2008-Apr-26 22:20:01 WARNING WAPP=1-chip_count: WARNING counts don't match between chip 0 and chip 2 (99999963 != 99999962)! 2008-Apr-26 22:20:01 WARNING WAPP=2-chip_count: WARNING counts don't match between chip 0 and chip 3 (99999947 != 99999945)! 2008-Apr-26 22:20:01 WARNING WAPP=1-chip_count: WARNING counts don't match between chip 0 and chip 3 (99999963 != 99999962)! 2008-Apr-26 22:20:01 WARNING WAPP=2-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999947 != 99999945)! 2008-Apr-26 22:20:01 WARNING WAPP=1-chip_count: WARNING counts don't match between chip 0 and chip 4 (99999963 != 99999964)! 2008-Apr-26 22:20:01 WARNING WAPP=1-chip_count: WARNING counts don't match between chip 0 and chip 5 (99999963 != 99999962)! 2008-Apr-26 22:20:01 WARNING WAPP=2-chip_count: WARNING counts don't match between chip 0 and chip 7 (99999947 != 99999946)! 2008-Apr-26 22:20:01 WARNING WAPP=2-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999947 != 99999946)! 2008-Apr-26 22:20:01 WARNING WAPP=1-chip_count: WARNING counts don't match between chip 0 and chip 7 (99999963 != 99999962)! 2008-Apr-26 22:20:01 WARNING WAPP=1-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999963 != 99999961)! 2008-Apr-26 22:20:01 WARNING WAPP=1-chip_count: WARNING counts don't match between chip 0 and chip 9 (99999963 != 99999962)! 2008-Apr-26 22:20:01 WARNING WAPP=2-chip_count: WARNING counts don't match between chip 0 and chip 9 (99999947 != 99999948)! 2008-Apr-26 22:20:01 WARNING WAPP=2-chip_count: WARNING counts don't match between chip 0 and chip 10 (99999947 != 99999946)! 2008-Apr-26 22:20:01 WARNING WAPP=2-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999947 != 99999945)! 2008-Apr-26 22:20:01 WARNING WAPP=1-chip_count: WARNING counts don't match between chip 0 and chip 10 (99999963 != 99999961)! 2008-Apr-26 22:20:01 WARNING WAPP=1-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999963 != 99999962)! 2008-Apr-26 22:20:02 WARNING WAPP=2-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999947 != 99999946)! 2008-Apr-26 22:20:02 WARNING WAPP=2-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999947 != 99999948)! 2008-Apr-26 22:20:02 WARNING WAPP=1-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999963 != 99999962)! 2008-Apr-26 22:20:02 WARNING WAPP=1-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999963 != 99999962)! 2008-Apr-26 22:20:02 WARNING WAPP=1-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999963 != 99999961)! 2008-Apr-26 22:20:02 WARNING WAPP=1-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999963 != 99999962)! 2008-Apr-26 22:20:02 WARNING WAPP=1-chip_count: WARNING counts don't match between chip 0 and chip 2 (99999966 != 99999965)! 2008-Apr-26 22:20:11 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 22:20:11.294 (seconds: 80411.294)!} 2008-Apr-26 22:20:11 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 22:20:11.294 (seconds: 80411.294)! 2008-Apr-26 22:20:12 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 80410.0 to 80411.0! 2008-Apr-26 22:20:13 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (80410.0 - 80412.0)! 2008-Apr-26 22:34:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-26 22:34:42 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-26 22:34:42 LOG5 end_task: Level: (4) ID = <10410> Status = 0 0 0 0 ok 2008-Apr-26 22:34:42 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-26 22:34:42 LOG5 end_task: Level: (3) ID = <10409> Status = 0 0 0 0 ok 2008-Apr-26 22:34:42 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-26 22:34:42 LOG5 finish_task: Level: (2) ID = <10376> Status = 0 0 0 0 ok 2008-Apr-26 22:34:42 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-26 22:34:42 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-26 22:34:42 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-26 22:34:42 LOG5 end_task: Level: (2) ID = <10376> Status = 0 0 0 0 ok 2008-Apr-26 22:34:42 COMMAND run_command_line: EXECUTING command 43: 'FIXEDDRIFT az=27.19 alfaangle=-3.5 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_075 ra=120900.00 dec=70900.00' 2008-Apr-26 22:34:42 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-26 22:34:43 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-26 22:34:43 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 27.19 -3.5 hcorcal 5 tracking no first 1 AGESVC1A_p2_075 120900.00 70900.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-26 22:34:43 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-26 22:34:43 LOG5 begin_task: Level: (2) ID = <10411> Status = 0 0 0 0 ok 2008-Apr-26 22:34:43 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGESVC1A_p2_073' 2008-Apr-26 22:34:43 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-26 22:34:43 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1A_p2_075} 2008-Apr-26 22:34:43 INFO3 fixed_driftmap: Sending telescope to Az = 27.19 and ZA = 12.57 2008-Apr-26 22:34:43 LOG3 track_source: Calling 'track_source AGESVC1A_p2_075 27.19 12.5685566669 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-26 22:34:43 START begin_task: Starting task 'sending tracking commands' 2008-Apr-26 22:34:43 LOG5 begin_task: Level: (3) ID = <10412> Status = 0 0 0 0 ok 2008-Apr-26 22:34:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_075} INFO {Slewing to source 'AGESVC1A_p2_075' ...} 2008-Apr-26 22:34:43 INFO1 track_source: Starting to track AGESVC1A_p2_075 2008-Apr-26 22:34:43 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_075" 2008-Apr-26 22:34:43 LOG3 vw_send: To DATATAKING: set ra 27.19 2008-Apr-26 22:34:43 LOG3 vw_send: To DATATAKING: set dec 12.5685566669 2008-Apr-26 22:34:43 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-26 22:34:43 LOG3 vw_send: To DATATAKING: pnt tr 27.19 12.5685566669 -CF 2008-Apr-26 22:34:43 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-26 22:34:43 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-26 22:34:43 LOG5 finish_task: Level: (3) ID = <10412> Status = 0 0 0 0 ok 2008-Apr-26 22:34:43 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-26 22:34:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 22:34:43 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-26 22:34:43 LOG5 end_task: Level: (3) ID = <10412> Status = 0 0 0 0 ok 2008-Apr-26 22:34:43 START begin_task: Starting task 'rotate ALFA to -3.5 degrees' 2008-Apr-26 22:34:43 LOG5 begin_task: Level: (3) ID = <10413> Status = 0 0 0 0 ok 2008-Apr-26 22:34:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -3.5 degrees ...} 2008-Apr-26 22:34:43 INFO2 rotate_alfa: ALFA commanded to -3.5 degrees 2008-Apr-26 22:34:43 LOG3 sock_errsend: To ALFAMOTOR: POSITION -3.5 REPLY 2008-Apr-26 22:34:43 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-26 22:34:43 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-26 22:34:43 LOG5 begin_task: Level: (4) ID = <10414> Status = 0 0 0 0 ok 2008-Apr-26 22:34:43 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_075" 2008-Apr-26 22:34:43 LOG4 got_cormsg: From DATATAKING: set ra 27.19 2008-Apr-26 22:34:43 LOG4 got_cormsg: From DATATAKING: set dec 12.5685566669 2008-Apr-26 22:34:43 LOG4 got_cormsg: From DATATAKING: vw% 27.19 2008-Apr-26 22:34:43 LOG4 got_cormsg: From DATATAKING: vw% 12.5685566669 2008-Apr-26 22:34:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 22:34:43 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-26 22:34:43 LOG4 got_cormsg: From DATATAKING: pnt tr 27.19 12.5685566669 -CF 2008-Apr-26 22:34:43 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-26 22:34:43 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-26 22:34:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 22:34:57 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-26 22:34:57 INFO3 alfa_motor: ALFA rotator in-position -3.50 degrees 2008-Apr-26 22:34:57 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-26 22:34:57 LOG5 end_task: Level: (4) ID = <10414> Status = 0 0 0 0 ok 2008-Apr-26 22:34:57 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-26 22:34:57 STOP finish_task: Finishing task 'rotate ALFA to -3.5 degrees' 2008-Apr-26 22:34:57 LOG5 finish_task: Level: (3) ID = <10413> Status = 0 0 0 0 ok 2008-Apr-26 22:34:57 INFO2 finish_task: DONE finished configuration: rotating ALFA to -3.5 degrees 2008-Apr-26 22:34:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 22:34:57 STOP end_task: Finishing task 'rotate ALFA to -3.5 degrees' with status 'OK' 2008-Apr-26 22:34:57 LOG5 end_task: Level: (3) ID = <10413> Status = 0 0 0 0 ok 2008-Apr-26 22:34:57 START begin_task: Starting task 'waiting on telescope' 2008-Apr-26 22:34:57 LOG5 begin_task: Level: (3) ID = <10415> Status = 0 0 0 0 ok 2008-Apr-26 22:34:57 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-26 22:34:57 LOG3 waittrk: Start waittrk 5 2008-Apr-26 22:34:57 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-26 22:34:57 LOG5 begin_task: Level: (4) ID = <10416> Status = 0 0 0 0 ok 2008-Apr-26 22:35:02 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-26 22:35:02 LOG5 end_task: Level: (4) ID = <10416> Status = 0 0 0 0 ok 2008-Apr-26 22:35:02 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-26 22:35:02 LOG5 begin_task: Level: (4) ID = <10417> Status = 0 0 0 0 ok 2008-Apr-26 22:36:04 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-26 22:36:04 LOG5 end_task: Level: (4) ID = <10417> Status = 0 0 0 0 ok 2008-Apr-26 22:36:04 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-26 22:36:04 INFO2 waittrk: Now tracking AGESVC1A_p2_075 2008-Apr-26 22:36:04 LOG4 waittrk: Current telescope position: Az = 386.91 ZA = 12.54 2008-Apr-26 22:36:04 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-26 22:36:04 LOG5 finish_task: Level: (3) ID = <10415> Status = 0 0 0 0 ok 2008-Apr-26 22:36:04 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-26 22:36:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 22:36:04 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-26 22:36:04 LOG5 end_task: Level: (3) ID = <10415> Status = 0 0 0 0 ok 2008-Apr-26 22:36:04 START begin_task: Starting task 'selecting calibration type' 2008-Apr-26 22:36:04 LOG5 begin_task: Level: (3) ID = <10418> Status = 0 0 0 0 ok 2008-Apr-26 22:36:04 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-26 22:36:04 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-26 22:36:04 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 22:36:04 START begin_task: Starting task 'waiting on setcal' 2008-Apr-26 22:36:04 LOG5 begin_task: Level: (4) ID = <10419> Status = 0 0 0 0 ok 2008-Apr-26 22:36:04 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-26 22:36:04 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 22:36:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 22:36:05 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-26 22:36:05 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-26 22:36:05 LOG5 end_task: Level: (4) ID = <10419> Status = 0 0 0 0 ok 2008-Apr-26 22:36:05 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-26 22:36:05 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-26 22:36:05 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-26 22:36:05 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-26 22:36:05 LOG5 begin_task: Level: (4) ID = <10420> Status = 0 0 0 0 ok 2008-Apr-26 22:36:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 22:36:06 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-26 22:36:06 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-26 22:36:06 LOG5 end_task: Level: (4) ID = <10420> Status = 0 0 0 0 ok 2008-Apr-26 22:36:06 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-26 22:36:06 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-26 22:36:06 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-26 22:36:06 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-26 22:36:06 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-26 22:36:06 LOG5 begin_task: Level: (4) ID = <10421> Status = 0 0 0 0 ok 2008-Apr-26 22:36:06 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-26 22:36:06 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-26 22:36:06 LOG5 end_task: Level: (4) ID = <10421> Status = 0 0 0 0 ok 2008-Apr-26 22:36:06 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-26 22:36:06 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-26 22:36:06 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-26 22:36:06 LOG5 finish_task: Level: (3) ID = <10418> Status = 0 0 0 0 ok 2008-Apr-26 22:36:06 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-26 22:36:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 22:36:06 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-26 22:36:06 LOG5 end_task: Level: (3) ID = <10418> Status = 0 0 0 0 ok 2008-Apr-26 22:36:06 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2008-Apr-26 22:36:06 INFO2 astwait: Waiting for 33 seconds from 02:36:06 to 02:36:39 UTC ... 2008-Apr-26 22:36:06 LOG4 send_obs_status: To obs_status: <1> TASKTIME 33 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-26 22:36:06 START begin_task: Starting task 'waiting on waiting for AST time' 2008-Apr-26 22:36:06 LOG5 begin_task: Level: (3) ID = <10422> Status = 0 0 0 0 ok 2008-Apr-26 22:36:39 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2008-Apr-26 22:36:39 LOG5 end_task: Level: (3) ID = <10422> Status = 0 0 0 0 ok 2008-Apr-26 22:36:39 INFO3 astwait: Finished waiting 2008-Apr-26 22:36:39 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-26 22:36:39 LOG5 dopset_later: Calling 'dopset_later 60.533109004202373' 2008-Apr-26 22:36:39 INFO3 dopset_later: Setting Doppler correction for 22:37:39 (60.5 seconds from now) 2008-Apr-26 22:36:39 LOG5 antvel: Calling 'antvel 27.190000 12.568557 F 60.533109004202373' 2008-Apr-26 22:36:39 LOG2 antvel: Parameters to Doppler: Heliocentric 95859 2008 117 0.0 2008-Apr-26 22:36:39 INFO5 antvel: Computed antenna velocity: +17.69369 km/s 2008-Apr-26 22:36:39 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=17.693686416999999 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-26 22:36:39 INFO4 dopset_gen: New sky frequencies: 1381.161913 1381.161913 1381.161913 1381.161913 1381.161913 1381.161913 1381.161913 1381.161913 1381.161913 2008-Apr-26 22:36:39 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.161913 sky0=1381.161913 sky1=1381.161913 sky2=1381.161913 sky3=1381.161913 sky4=1381.161913 sky5=1381.161913 sky6=1381.161913 sky7=1381.161913 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-26 22:36:39 LOG2 dopset_gen: Result from 'sky2syn': 1631.161913 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-26 22:36:39 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631161913.0} 2008-Apr-26 22:36:39 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 22:36:39 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-26 22:36:39 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-26 22:36:39 INFO5 fixed_driftmap: Tracking J2000 position: RA = 12:08:03.9 Dec = +07:08:51.3 2008-Apr-26 22:36:39 LOG3 track_source: Calling 'track_source AGESVC1A_p2_075 120803.9 070851.3 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-26 22:36:39 START begin_task: Starting task 'sending tracking commands' 2008-Apr-26 22:36:39 LOG5 begin_task: Level: (3) ID = <10423> Status = 0 0 0 0 ok 2008-Apr-26 22:36:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_075} INFO {Slewing to source 'AGESVC1A_p2_075' ...} 2008-Apr-26 22:36:39 INFO1 track_source: Starting to track AGESVC1A_p2_075 2008-Apr-26 22:36:39 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_075" 2008-Apr-26 22:36:39 LOG3 vw_send: To DATATAKING: set ra 120803.9 2008-Apr-26 22:36:39 LOG3 vw_send: To DATATAKING: set dec 070851.3 2008-Apr-26 22:36:39 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-26 22:36:39 LOG3 vw_send: To DATATAKING: pnt tr 120803.9 070851.3 -CJ 2008-Apr-26 22:36:39 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-26 22:36:39 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-26 22:36:39 LOG5 finish_task: Level: (3) ID = <10423> Status = 0 0 0 0 ok 2008-Apr-26 22:36:39 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-26 22:36:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 22:36:39 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-26 22:36:39 LOG5 end_task: Level: (3) ID = <10423> Status = 0 0 0 0 ok 2008-Apr-26 22:36:39 START begin_task: Starting task 'waiting on telescope' 2008-Apr-26 22:36:39 LOG5 begin_task: Level: (3) ID = <10424> Status = 0 0 0 0 ok 2008-Apr-26 22:36:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-26 22:36:39 LOG3 waittrk: Start waittrk 5 2008-Apr-26 22:36:39 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-26 22:36:39 LOG5 begin_task: Level: (4) ID = <10425> Status = 0 0 0 0 ok 2008-Apr-26 22:36:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631161913.0} 2008-Apr-26 22:36:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 22:36:39 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_075" 2008-Apr-26 22:36:39 LOG4 got_cormsg: From DATATAKING: set ra 120803.9 2008-Apr-26 22:36:39 LOG4 got_cormsg: From DATATAKING: set dec 070851.3 2008-Apr-26 22:36:39 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 120803.9 2008-Apr-26 22:36:39 LOG4 got_cormsg: From DATATAKING: vw% 070851.3 2008-Apr-26 22:36:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 22:36:39 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-26 22:36:39 LOG4 got_cormsg: From DATATAKING: pnt tr 120803.9 070851.3 -CJ 2008-Apr-26 22:36:39 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-26 22:36:39 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-26 22:36:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 22:36:44 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-26 22:36:44 LOG5 end_task: Level: (4) ID = <10425> Status = 0 0 0 0 ok 2008-Apr-26 22:36:44 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-26 22:36:44 LOG5 begin_task: Level: (4) ID = <10426> Status = 0 0 0 0 ok 2008-Apr-26 22:36:46 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-26 22:36:46 LOG5 end_task: Level: (4) ID = <10426> Status = 0 0 0 0 ok 2008-Apr-26 22:36:46 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-26 22:36:46 INFO2 waittrk: Now tracking AGESVC1A_p2_075 2008-Apr-26 22:36:46 LOG4 waittrk: Current telescope position: Az = 386.98 ZA = 12.55 2008-Apr-26 22:36:46 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-26 22:36:46 LOG5 finish_task: Level: (3) ID = <10424> Status = 0 0 0 0 ok 2008-Apr-26 22:36:46 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-26 22:36:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 22:36:46 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-26 22:36:46 LOG5 end_task: Level: (3) ID = <10424> Status = 0 0 0 0 ok 2008-Apr-26 22:36:46 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-26 22:36:46 LOG5 begin_task: Level: (3) ID = <10427> Status = 0 0 0 0 ok 2008-Apr-26 22:36:46 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-26 22:36:46 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-26 22:36:46 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-26 22:36:46 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-26 22:36:46 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 22:36:46 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-26 22:36:46 LOG5 begin_task: Level: (4) ID = <10428> Status = 0 0 0 0 ok 2008-Apr-26 22:36:46 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-26 22:36:46 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 22:36:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 22:36:49 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-26 22:36:49 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-26 22:36:49 LOG5 end_task: Level: (4) ID = <10428> Status = 0 0 0 0 ok 2008-Apr-26 22:36:49 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-26 22:36:49 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-26 22:36:49 LOG5 begin_task: Level: (4) ID = <10429> Status = 0 0 0 0 ok 2008-Apr-26 22:36:49 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-26 22:36:49 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-26 22:36:49 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-26 22:36:49 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-26 22:36:49 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-26 22:36:49 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-26 22:36:49 LOG5 begin_task: Level: (5) ID = <10430> Status = 0 0 0 0 ok 2008-Apr-26 22:36:50 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-26 22:36:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 22:36:50 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 1 dB --- beam 1: 8 6 dB 2008-Apr-26 22:36:50 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 6 dB 2008-Apr-26 22:36:50 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-26 22:36:50 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 3 3 dB 2008-Apr-26 22:36:50 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-26 22:36:50 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-26 22:36:50 LOG5 end_task: Level: (5) ID = <10430> Status = 0 0 0 0 ok 2008-Apr-26 22:36:50 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.880 1.036 ALFA beam 1: 0.885 1.078 2008-Apr-26 22:36:50 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.021 0.949 ALFA beam 3: 0.980 1.054 2008-Apr-26 22:36:50 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.932 0.966 ALFA beam 5: 1.031 0.897 2008-Apr-26 22:36:50 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.040 1.057 ALFA beam 7: 0.909 0.943 2008-Apr-26 22:36:50 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-26 22:36:50 LOG5 finish_task: Level: (4) ID = <10429> Status = 0 0 0 0 ok 2008-Apr-26 22:36:50 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-26 22:36:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 22:36:50 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-26 22:36:50 LOG5 end_task: Level: (4) ID = <10429> Status = 0 0 0 0 ok 2008-Apr-26 22:36:50 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-26 22:36:50 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-26 22:36:50 LOG5 finish_task: Level: (3) ID = <10427> Status = 0 0 0 0 ok 2008-Apr-26 22:36:50 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-26 22:36:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 22:36:50 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-26 22:36:50 LOG5 end_task: Level: (3) ID = <10427> Status = 0 0 0 0 ok 2008-Apr-26 22:36:50 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 SS 2008-Apr-26 22:36:50 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 SS 2008-Apr-26 22:36:50 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 SS 2008-Apr-26 22:36:50 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 SS 2008-Apr-26 22:36:50 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-26 22:36:50 START begin_task: Starting task 'WAPP calibration' 2008-Apr-26 22:36:50 LOG5 begin_task: Level: (3) ID = <10431> Status = 0 0 0 0 ok 2008-Apr-26 22:36:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-26 22:36:50 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-26 22:36:50 START begin_task: Starting task 'selecting calibration type' 2008-Apr-26 22:36:50 LOG5 begin_task: Level: (4) ID = <10432> Status = 0 0 0 0 ok 2008-Apr-26 22:36:50 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-26 22:36:50 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-26 22:36:50 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 22:36:50 START begin_task: Starting task 'waiting on setcal' 2008-Apr-26 22:36:50 LOG5 begin_task: Level: (5) ID = <10433> Status = 0 0 0 0 ok 2008-Apr-26 22:36:50 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 SS' 2008-Apr-26 22:36:51 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-26 22:36:51 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 22:36:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 22:36:51 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-26 22:36:51 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-26 22:36:51 LOG5 end_task: Level: (5) ID = <10433> Status = 0 0 0 0 ok 2008-Apr-26 22:36:51 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-26 22:36:51 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-26 22:36:51 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-26 22:36:51 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-26 22:36:51 LOG5 begin_task: Level: (5) ID = <10434> Status = 0 0 0 0 ok 2008-Apr-26 22:36:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 22:36:51 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-26 22:36:51 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-26 22:36:51 LOG5 end_task: Level: (5) ID = <10434> Status = 0 0 0 0 ok 2008-Apr-26 22:36:51 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-26 22:36:51 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-26 22:36:51 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-26 22:36:51 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-26 22:36:51 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-26 22:36:51 LOG5 begin_task: Level: (5) ID = <10435> Status = 0 0 0 0 ok 2008-Apr-26 22:36:51 NOTE WAPPDATA-new_file: New FITS file: wapp.20080426.a2048.0010.fits 2008-Apr-26 22:36:51 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-26 22:36:51 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-26 22:36:51 LOG5 end_task: Level: (5) ID = <10435> Status = 0 0 0 0 ok 2008-Apr-26 22:36:51 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-26 22:36:51 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-26 22:36:51 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-26 22:36:51 LOG5 finish_task: Level: (4) ID = <10432> Status = 0 0 0 0 ok 2008-Apr-26 22:36:51 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-26 22:36:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 22:36:51 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-26 22:36:51 LOG5 end_task: Level: (4) ID = <10432> Status = 0 0 0 0 ok 2008-Apr-26 22:36:51 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-26 22:36:51 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-26 22:36:51 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-26 22:36:51 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-26 22:36:51 LOG5 begin_task: Level: (4) ID = <10436> Status = 0 0 0 0 ok 2008-Apr-26 22:36:51 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080426.a2048.0010.fits} 2008-Apr-26 22:36:51 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-26 22:36:51 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-26 22:36:51 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-26 22:36:51 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-26 22:36:51 LOG5 end_task: Level: (4) ID = <10436> Status = 0 0 0 0 ok 2008-Apr-26 22:36:51 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-26 22:36:51 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-26 22:36:51 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-26 22:36:51 LOG5 begin_task: Level: (4) ID = <10437> Status = 0 0 0 0 ok 2008-Apr-26 22:36:51 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-26 22:36:51 LOG5 log_alfabeam: Parameters: 12.134416666666665 7.1475833333333343 12.527698 2008.3229083010117 -3.500039 2008-Apr-26 22:36:51 LOG4 log_alfabeam: ALFABEAM 0 12.134416666666667 7.147583333333337 2008-Apr-26 22:36:51 LOG4 log_alfabeam: ALFABEAM 1 12.134023493299992 7.249589191166348 2008-Apr-26 22:36:51 LOG4 log_alfabeam: ALFABEAM 2 12.128724917052164 7.182148241675169 2008-Apr-26 22:36:51 LOG4 log_alfabeam: ALFABEAM 3 12.129120028643655 7.079958029498270 2008-Apr-26 22:36:51 LOG4 log_alfabeam: ALFABEAM 4 12.134857866440550 7.045447669122776 2008-Apr-26 22:36:51 LOG4 log_alfabeam: ALFABEAM 5 12.140121175218734 7.113627908165044 2008-Apr-26 22:36:51 LOG4 log_alfabeam: ALFABEAM 6 12.139681981695187 7.215579481356491 2008-Apr-26 22:36:51 INFO2 take_spectra: Starting WAPP scan: 811700481 2008-Apr-26 22:36:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-26 22:36:52 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-26 22:36:52 LOG5 begin_task: Level: (5) ID = <10438> Status = 0 0 0 0 ok 2008-Apr-26 22:36:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-26 22:36:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9413.00 2008-Apr-26 22:36:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.161913 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-26 22:36:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.161913 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-26 22:36:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.161913 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-26 22:36:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.161913 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-26 22:36:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.467 > 1.4)! 2008-Apr-26 22:36:58 LOG4 check_wapp_levels: WAPP-1 power levels: 1.238 1.329 1.201 1.459 2008-Apr-26 22:36:58 LOG4 check_wapp_levels: WAPP-2 power levels: 1.021 0.949 0.980 1.054 2008-Apr-26 22:36:58 LOG4 check_wapp_levels: WAPP-3 power levels: 1.302 1.343 1.435 1.208 2008-Apr-26 22:36:58 LOG4 check_wapp_levels: WAPP-4 power levels: 1.448 1.467 1.266 1.308 2008-Apr-26 22:36:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.161913 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-26 22:36:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.161913 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 22:36:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.161913 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 22:36:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.161913 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 22:36:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.161913 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 22:36:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-26 22:36:58 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-26 22:36:58 LOG5 end_task: Level: (5) ID = <10438> Status = 0 0 0 0 ok 2008-Apr-26 22:36:58 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-26 22:36:58 LOG5 end_task: Level: (4) ID = <10437> Status = 0 0 0 0 ok 2008-Apr-26 22:36:58 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-26 22:36:58 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-26 22:36:58 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-26 22:36:58 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-26 22:36:58 LOG5 begin_task: Level: (4) ID = <10439> Status = 0 0 0 0 ok 2008-Apr-26 22:36:58 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-26 22:36:58 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-26 22:36:58 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-26 22:36:58 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-26 22:36:58 LOG5 end_task: Level: (4) ID = <10439> Status = 0 0 0 0 ok 2008-Apr-26 22:36:58 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-26 22:36:58 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-26 22:36:58 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-26 22:36:58 LOG5 begin_task: Level: (4) ID = <10440> Status = 0 0 0 0 ok 2008-Apr-26 22:36:58 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-26 22:36:58 LOG5 log_alfabeam: Parameters: 12.134416666666665 7.1475833333333343 12.529648 2008.3229085228281 -3.500039 2008-Apr-26 22:36:58 LOG4 log_alfabeam: ALFABEAM 0 12.134416666666663 7.147583333333333 2008-Apr-26 22:36:58 LOG4 log_alfabeam: ALFABEAM 1 12.134036991902052 7.249600606445974 2008-Apr-26 22:36:58 LOG4 log_alfabeam: ALFABEAM 2 12.128729501445179 7.182314958335990 2008-Apr-26 22:36:58 LOG4 log_alfabeam: ALFABEAM 3 12.129111093362621 7.080113468748464 2008-Apr-26 22:36:58 LOG4 log_alfabeam: ALFABEAM 4 12.134844306058161 7.045434981393251 2008-Apr-26 22:36:58 LOG4 log_alfabeam: ALFABEAM 5 12.140116655826585 7.113460160823244 2008-Apr-26 22:36:58 LOG4 log_alfabeam: ALFABEAM 6 12.139691001477264 7.215424557134058 2008-Apr-26 22:36:58 INFO2 take_spectra: Starting WAPP scan: 811700482 2008-Apr-26 22:36:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-26 22:36:59 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-26 22:36:59 LOG5 begin_task: Level: (5) ID = <10441> Status = 0 0 0 0 ok 2008-Apr-26 22:36:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-26 22:36:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9420.00 2008-Apr-26 22:37:04 INFO5 check_wapp_levels: WAPP power levels are between 1.201 and 1.467 (still bad) 2008-Apr-26 22:37:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.161913 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-26 22:37:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.161913 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-26 22:37:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.161913 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-26 22:37:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.161913 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-26 22:37:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.161913 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-26 22:37:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.161913 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 22:37:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.161913 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 22:37:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.161913 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 22:37:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.161913 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 22:37:05 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-26 22:37:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-26 22:37:05 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-26 22:37:05 LOG5 end_task: Level: (5) ID = <10441> Status = 0 0 0 0 ok 2008-Apr-26 22:37:05 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-26 22:37:05 LOG5 end_task: Level: (4) ID = <10440> Status = 0 0 0 0 ok 2008-Apr-26 22:37:05 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-26 22:37:05 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-26 22:37:05 LOG5 finish_task: Level: (3) ID = <10431> Status = 0 0 0 0 ok 2008-Apr-26 22:37:05 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-26 22:37:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 22:37:05 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-26 22:37:05 LOG5 end_task: Level: (3) ID = <10431> Status = 0 0 0 0 ok 2008-Apr-26 22:37:05 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-26 22:37:05 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 27.19 and ZA = 12.57 2008-Apr-26 22:37:05 LOG3 track_source: Calling 'track_source AGESVC1A_p2_075 27.19 12.5685566669 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-26 22:37:05 START begin_task: Starting task 'sending tracking commands' 2008-Apr-26 22:37:05 LOG5 begin_task: Level: (3) ID = <10442> Status = 0 0 0 0 ok 2008-Apr-26 22:37:05 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_075} INFO {Slewing to source 'AGESVC1A_p2_075' ...} 2008-Apr-26 22:37:05 INFO1 track_source: Starting to track AGESVC1A_p2_075 2008-Apr-26 22:37:05 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_075" 2008-Apr-26 22:37:05 LOG3 vw_send: To DATATAKING: set ra 27.19 2008-Apr-26 22:37:05 LOG3 vw_send: To DATATAKING: set dec 12.5685566669 2008-Apr-26 22:37:05 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-26 22:37:05 LOG3 vw_send: To DATATAKING: pnt tr 27.19 12.5685566669 -CF 2008-Apr-26 22:37:05 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-26 22:37:05 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-26 22:37:05 LOG5 finish_task: Level: (3) ID = <10442> Status = 0 0 0 0 ok 2008-Apr-26 22:37:05 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-26 22:37:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 22:37:06 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-26 22:37:06 LOG5 end_task: Level: (3) ID = <10442> Status = 0 0 0 0 ok 2008-Apr-26 22:37:06 LOG1 fixed_driftmap: Parameters: HA = +00:23:00.2 Start = 12:32:27.4 LST = 12:31:53.7 diff = 33.6 secs 2008-Apr-26 22:37:06 INFO2 fixed_driftmap: Waiting 31.6 seconds for RA 12:09:27 2008-Apr-26 22:37:06 INFO2 lstwait: Waiting for 31.5 secs from LST 12:31:54 to LST 12:32:25 ... 2008-Apr-26 22:37:06 LOG4 send_obs_status: To obs_status: <1> TASKTIME 31.540487193003763 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-26 22:37:06 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-26 22:37:06 LOG5 begin_task: Level: (3) ID = <10443> Status = 0 0 0 0 ok 2008-Apr-26 22:37:06 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_075" 2008-Apr-26 22:37:06 LOG4 got_cormsg: From DATATAKING: set ra 27.19 2008-Apr-26 22:37:06 LOG4 got_cormsg: From DATATAKING: set dec 12.5685566669 2008-Apr-26 22:37:06 LOG4 got_cormsg: From DATATAKING: vw% 27.19 2008-Apr-26 22:37:06 LOG4 got_cormsg: From DATATAKING: vw% 12.5685566669 2008-Apr-26 22:37:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 22:37:06 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-26 22:37:06 LOG4 got_cormsg: From DATATAKING: pnt tr 27.19 12.5685566669 -CF 2008-Apr-26 22:37:06 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-26 22:37:06 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-26 22:37:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 22:37:10 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.889 and 1.079 2008-Apr-26 22:37:37 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-26 22:37:37 LOG5 end_task: Level: (3) ID = <10443> Status = 0 0 0 0 ok 2008-Apr-26 22:37:37 LOG4 lstwait: Finished waiting, the gui caused difference: 0.46355888000491063 2008-Apr-26 22:37:37 INFO3 lstwait: Finished waiting 2008-Apr-26 22:37:37 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-26 22:37:37 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-26 22:37:37 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-26 22:37:37 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-26 22:37:37 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-26 22:37:37 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-26 22:37:37 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-26 22:37:37 LOG5 begin_task: Level: (3) ID = <10444> Status = 0 0 0 0 ok 2008-Apr-26 22:37:37 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-26 22:37:37 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-26 22:37:37 INFO2 take_spectra: Starting WAPP scan: 811700483 2008-Apr-26 22:37:38 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-26 22:37:38 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-26 22:37:38 LOG5 begin_task: Level: (4) ID = <10445> Status = 0 0 0 0 ok 2008-Apr-26 22:37:38 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-26 22:37:38 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9459.00 2008-Apr-26 22:37:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.161913 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-26 22:37:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.161913 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-26 22:37:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.161913 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-26 22:37:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.161913 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-26 22:37:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.161913 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-26 22:37:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.161913 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 22:37:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.161913 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 22:37:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.161913 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 22:37:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.161913 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 22:50:09 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 22:50:09.295 (seconds: 82209.295)!} 2008-Apr-26 22:50:09 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 22:50:09.295 (seconds: 82209.295)! 2008-Apr-26 22:50:10 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 82208.0 to 82209.0! 2008-Apr-26 22:50:11 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (82208.0 - 82210.0)! 2008-Apr-26 22:57:39 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-26 22:57:39 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-26 22:57:39 LOG5 end_task: Level: (4) ID = <10445> Status = 0 0 0 0 ok 2008-Apr-26 22:57:39 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-26 22:57:39 LOG5 end_task: Level: (3) ID = <10444> Status = 0 0 0 0 ok 2008-Apr-26 22:57:39 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-26 22:57:39 LOG5 finish_task: Level: (2) ID = <10411> Status = 0 0 0 0 ok 2008-Apr-26 22:57:39 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-26 22:57:39 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-26 22:57:39 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-26 22:57:39 LOG5 end_task: Level: (2) ID = <10411> Status = 0 0 0 0 ok 2008-Apr-26 22:57:39 COMMAND run_command_line: EXECUTING command 47: 'FIXEDDRIFT az=46.20 alfaangle=-20.2 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_077 ra=120900.00 dec=70600.00' 2008-Apr-26 22:57:39 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-26 22:57:40 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-26 22:57:40 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 46.20 -20.2 hcorcal 5 tracking no first 1 AGESVC1A_p2_077 120900.00 70600.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-26 22:57:40 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-26 22:57:40 LOG5 begin_task: Level: (2) ID = <10446> Status = 0 0 0 0 ok 2008-Apr-26 22:57:40 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGESVC1A_p2_075' 2008-Apr-26 22:57:40 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-26 22:57:40 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1A_p2_077} 2008-Apr-26 22:57:40 INFO3 fixed_driftmap: Sending telescope to Az = 46.20 and ZA = 15.91 2008-Apr-26 22:57:40 LOG3 track_source: Calling 'track_source AGESVC1A_p2_077 46.20 15.9084902016 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-26 22:57:40 START begin_task: Starting task 'sending tracking commands' 2008-Apr-26 22:57:40 LOG5 begin_task: Level: (3) ID = <10447> Status = 0 0 0 0 ok 2008-Apr-26 22:57:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_077} INFO {Slewing to source 'AGESVC1A_p2_077' ...} 2008-Apr-26 22:57:40 INFO1 track_source: Starting to track AGESVC1A_p2_077 2008-Apr-26 22:57:40 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_077" 2008-Apr-26 22:57:40 LOG3 vw_send: To DATATAKING: set ra 46.20 2008-Apr-26 22:57:40 LOG3 vw_send: To DATATAKING: set dec 15.9084902016 2008-Apr-26 22:57:40 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-26 22:57:40 LOG3 vw_send: To DATATAKING: pnt tr 46.20 15.9084902016 -CF 2008-Apr-26 22:57:40 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-26 22:57:40 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-26 22:57:40 LOG5 finish_task: Level: (3) ID = <10447> Status = 0 0 0 0 ok 2008-Apr-26 22:57:40 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-26 22:57:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 22:57:40 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-26 22:57:40 LOG5 end_task: Level: (3) ID = <10447> Status = 0 0 0 0 ok 2008-Apr-26 22:57:40 START begin_task: Starting task 'rotate ALFA to -20.2 degrees' 2008-Apr-26 22:57:40 LOG5 begin_task: Level: (3) ID = <10448> Status = 0 0 0 0 ok 2008-Apr-26 22:57:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -20.2 degrees ...} 2008-Apr-26 22:57:40 INFO2 rotate_alfa: ALFA commanded to -20.2 degrees 2008-Apr-26 22:57:40 LOG3 sock_errsend: To ALFAMOTOR: POSITION -20.2 REPLY 2008-Apr-26 22:57:40 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-26 22:57:40 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-26 22:57:40 LOG5 begin_task: Level: (4) ID = <10449> Status = 0 0 0 0 ok 2008-Apr-26 22:57:40 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_077" 2008-Apr-26 22:57:40 LOG4 got_cormsg: From DATATAKING: set ra 46.20 2008-Apr-26 22:57:40 LOG4 got_cormsg: From DATATAKING: set dec 15.9084902016 2008-Apr-26 22:57:40 LOG4 got_cormsg: From DATATAKING: vw% 46.20 2008-Apr-26 22:57:40 LOG4 got_cormsg: From DATATAKING: vw% 15.9084902016 2008-Apr-26 22:57:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 22:57:40 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-26 22:57:40 LOG4 got_cormsg: From DATATAKING: pnt tr 46.20 15.9084902016 -CF 2008-Apr-26 22:57:40 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-26 22:57:40 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-26 22:57:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 22:57:51 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-26 22:57:51 INFO3 alfa_motor: ALFA rotator in-position -20.20 degrees 2008-Apr-26 22:57:51 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-26 22:57:51 LOG5 end_task: Level: (4) ID = <10449> Status = 0 0 0 0 ok 2008-Apr-26 22:57:51 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-26 22:57:51 STOP finish_task: Finishing task 'rotate ALFA to -20.2 degrees' 2008-Apr-26 22:57:51 LOG5 finish_task: Level: (3) ID = <10448> Status = 0 0 0 0 ok 2008-Apr-26 22:57:51 INFO2 finish_task: DONE finished configuration: rotating ALFA to -20.2 degrees 2008-Apr-26 22:57:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 22:57:51 STOP end_task: Finishing task 'rotate ALFA to -20.2 degrees' with status 'OK' 2008-Apr-26 22:57:51 LOG5 end_task: Level: (3) ID = <10448> Status = 0 0 0 0 ok 2008-Apr-26 22:57:51 START begin_task: Starting task 'waiting on telescope' 2008-Apr-26 22:57:51 LOG5 begin_task: Level: (3) ID = <10450> Status = 0 0 0 0 ok 2008-Apr-26 22:57:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-26 22:57:51 LOG3 waittrk: Start waittrk 5 2008-Apr-26 22:57:51 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-26 22:57:51 LOG5 begin_task: Level: (4) ID = <10451> Status = 0 0 0 0 ok 2008-Apr-26 22:57:56 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-26 22:57:56 LOG5 end_task: Level: (4) ID = <10451> Status = 0 0 0 0 ok 2008-Apr-26 22:57:56 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-26 22:57:56 LOG5 begin_task: Level: (4) ID = <10452> Status = 0 0 0 0 ok 2008-Apr-26 22:59:11 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-26 22:59:11 LOG5 end_task: Level: (4) ID = <10452> Status = 0 0 0 0 ok 2008-Apr-26 22:59:11 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-26 22:59:11 INFO2 waittrk: Now tracking AGESVC1A_p2_077 2008-Apr-26 22:59:11 LOG4 waittrk: Current telescope position: Az = 405.97 ZA = 15.90 2008-Apr-26 22:59:11 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-26 22:59:11 LOG5 finish_task: Level: (3) ID = <10450> Status = 0 0 0 0 ok 2008-Apr-26 22:59:11 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-26 22:59:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 22:59:11 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-26 22:59:11 LOG5 end_task: Level: (3) ID = <10450> Status = 0 0 0 0 ok 2008-Apr-26 22:59:11 START begin_task: Starting task 'selecting calibration type' 2008-Apr-26 22:59:11 LOG5 begin_task: Level: (3) ID = <10453> Status = 0 0 0 0 ok 2008-Apr-26 22:59:11 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-26 22:59:11 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-26 22:59:11 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 22:59:11 START begin_task: Starting task 'waiting on setcal' 2008-Apr-26 22:59:11 LOG5 begin_task: Level: (4) ID = <10454> Status = 0 0 0 0 ok 2008-Apr-26 22:59:11 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-26 22:59:11 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 22:59:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 22:59:12 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-26 22:59:12 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-26 22:59:12 LOG5 end_task: Level: (4) ID = <10454> Status = 0 0 0 0 ok 2008-Apr-26 22:59:12 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-26 22:59:12 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-26 22:59:12 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-26 22:59:12 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-26 22:59:12 LOG5 begin_task: Level: (4) ID = <10455> Status = 0 0 0 0 ok 2008-Apr-26 22:59:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 22:59:12 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-26 22:59:12 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-26 22:59:12 LOG5 end_task: Level: (4) ID = <10455> Status = 0 0 0 0 ok 2008-Apr-26 22:59:12 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-26 22:59:12 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-26 22:59:12 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-26 22:59:12 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-26 22:59:12 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-26 22:59:12 LOG5 begin_task: Level: (4) ID = <10456> Status = 0 0 0 0 ok 2008-Apr-26 22:59:12 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-26 22:59:12 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-26 22:59:12 LOG5 end_task: Level: (4) ID = <10456> Status = 0 0 0 0 ok 2008-Apr-26 22:59:12 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-26 22:59:12 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-26 22:59:12 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-26 22:59:12 LOG5 finish_task: Level: (3) ID = <10453> Status = 0 0 0 0 ok 2008-Apr-26 22:59:12 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-26 22:59:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 22:59:12 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-26 22:59:12 LOG5 end_task: Level: (3) ID = <10453> Status = 0 0 0 0 ok 2008-Apr-26 22:59:12 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2008-Apr-26 22:59:12 INFO2 astwait: Waiting for 22 seconds from 02:59:12 to 02:59:34 UTC ... 2008-Apr-26 22:59:12 LOG4 send_obs_status: To obs_status: <1> TASKTIME 22 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-26 22:59:12 START begin_task: Starting task 'waiting on waiting for AST time' 2008-Apr-26 22:59:12 LOG5 begin_task: Level: (3) ID = <10457> Status = 0 0 0 0 ok 2008-Apr-26 22:59:34 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2008-Apr-26 22:59:34 LOG5 end_task: Level: (3) ID = <10457> Status = 0 0 0 0 ok 2008-Apr-26 22:59:34 INFO3 astwait: Finished waiting 2008-Apr-26 22:59:34 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-26 22:59:34 LOG5 dopset_later: Calling 'dopset_later 61.218560882308644' 2008-Apr-26 22:59:34 INFO3 dopset_later: Setting Doppler correction for 23:00:34 (61.2 seconds from now) 2008-Apr-26 22:59:34 LOG5 antvel: Calling 'antvel 46.200000 15.908490 F 61.218560882308644' 2008-Apr-26 22:59:34 LOG2 antvel: Parameters to Doppler: Heliocentric 97234 2008 117 0.0 2008-Apr-26 22:59:34 INFO5 antvel: Computed antenna velocity: +17.73701 km/s 2008-Apr-26 22:59:34 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=17.737012443600001 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-26 22:59:34 INFO4 dopset_gen: New sky frequencies: 1381.161713 1381.161713 1381.161713 1381.161713 1381.161713 1381.161713 1381.161713 1381.161713 1381.161713 2008-Apr-26 22:59:34 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.161713 sky0=1381.161713 sky1=1381.161713 sky2=1381.161713 sky3=1381.161713 sky4=1381.161713 sky5=1381.161713 sky6=1381.161713 sky7=1381.161713 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-26 22:59:34 LOG2 dopset_gen: Result from 'sky2syn': 1631.161713 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-26 22:59:34 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631161713.0} 2008-Apr-26 22:59:34 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 22:59:34 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-26 22:59:34 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-26 22:59:34 INFO5 fixed_driftmap: Tracking J2000 position: RA = 12:08:03.2 Dec = +07:05:51.3 2008-Apr-26 22:59:34 LOG3 track_source: Calling 'track_source AGESVC1A_p2_077 120803.2 070551.3 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-26 22:59:34 START begin_task: Starting task 'sending tracking commands' 2008-Apr-26 22:59:34 LOG5 begin_task: Level: (3) ID = <10458> Status = 0 0 0 0 ok 2008-Apr-26 22:59:34 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_077} INFO {Slewing to source 'AGESVC1A_p2_077' ...} 2008-Apr-26 22:59:34 INFO1 track_source: Starting to track AGESVC1A_p2_077 2008-Apr-26 22:59:34 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_077" 2008-Apr-26 22:59:34 LOG3 vw_send: To DATATAKING: set ra 120803.2 2008-Apr-26 22:59:34 LOG3 vw_send: To DATATAKING: set dec 070551.3 2008-Apr-26 22:59:34 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-26 22:59:34 LOG3 vw_send: To DATATAKING: pnt tr 120803.2 070551.3 -CJ 2008-Apr-26 22:59:34 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-26 22:59:34 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-26 22:59:34 LOG5 finish_task: Level: (3) ID = <10458> Status = 0 0 0 0 ok 2008-Apr-26 22:59:34 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-26 22:59:34 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 22:59:34 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-26 22:59:34 LOG5 end_task: Level: (3) ID = <10458> Status = 0 0 0 0 ok 2008-Apr-26 22:59:34 START begin_task: Starting task 'waiting on telescope' 2008-Apr-26 22:59:34 LOG5 begin_task: Level: (3) ID = <10459> Status = 0 0 0 0 ok 2008-Apr-26 22:59:34 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-26 22:59:34 LOG3 waittrk: Start waittrk 5 2008-Apr-26 22:59:34 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-26 22:59:34 LOG5 begin_task: Level: (4) ID = <10460> Status = 0 0 0 0 ok 2008-Apr-26 22:59:34 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631161713.0} 2008-Apr-26 22:59:34 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 22:59:34 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_077" 2008-Apr-26 22:59:34 LOG4 got_cormsg: From DATATAKING: set ra 120803.2 2008-Apr-26 22:59:34 LOG4 got_cormsg: From DATATAKING: set dec 070551.3 2008-Apr-26 22:59:34 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-26 22:59:34 LOG4 got_cormsg: From DATATAKING: vw% 120803.2 2008-Apr-26 22:59:34 LOG4 got_cormsg: From DATATAKING: vw% 070551.3 2008-Apr-26 22:59:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 22:59:34 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-26 22:59:34 LOG4 got_cormsg: From DATATAKING: pnt tr 120803.2 070551.3 -CJ 2008-Apr-26 22:59:34 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-26 22:59:34 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-26 22:59:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 22:59:39 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-26 22:59:39 LOG5 end_task: Level: (4) ID = <10460> Status = 0 0 0 0 ok 2008-Apr-26 22:59:39 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-26 22:59:39 LOG5 begin_task: Level: (4) ID = <10461> Status = 0 0 0 0 ok 2008-Apr-26 22:59:41 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-26 22:59:41 LOG5 end_task: Level: (4) ID = <10461> Status = 0 0 0 0 ok 2008-Apr-26 22:59:41 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-26 22:59:41 INFO2 waittrk: Now tracking AGESVC1A_p2_077 2008-Apr-26 22:59:41 LOG4 waittrk: Current telescope position: Az = 406.01 ZA = 15.91 2008-Apr-26 22:59:41 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-26 22:59:41 LOG5 finish_task: Level: (3) ID = <10459> Status = 0 0 0 0 ok 2008-Apr-26 22:59:41 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-26 22:59:41 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 22:59:41 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-26 22:59:41 LOG5 end_task: Level: (3) ID = <10459> Status = 0 0 0 0 ok 2008-Apr-26 22:59:41 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-26 22:59:41 LOG5 begin_task: Level: (3) ID = <10462> Status = 0 0 0 0 ok 2008-Apr-26 22:59:41 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-26 22:59:41 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-26 22:59:41 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-26 22:59:41 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-26 22:59:41 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 22:59:41 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-26 22:59:41 LOG5 begin_task: Level: (4) ID = <10463> Status = 0 0 0 0 ok 2008-Apr-26 22:59:42 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-26 22:59:42 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 22:59:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 22:59:44 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-26 22:59:44 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-26 22:59:44 LOG5 end_task: Level: (4) ID = <10463> Status = 0 0 0 0 ok 2008-Apr-26 22:59:44 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-26 22:59:44 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-26 22:59:44 LOG5 begin_task: Level: (4) ID = <10464> Status = 0 0 0 0 ok 2008-Apr-26 22:59:44 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-26 22:59:44 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-26 22:59:44 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-26 22:59:44 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-26 22:59:44 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-26 22:59:44 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-26 22:59:44 LOG5 begin_task: Level: (5) ID = <10465> Status = 0 0 0 0 ok 2008-Apr-26 22:59:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 22:59:45 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-26 22:59:45 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 1 dB --- beam 1: 8 6 dB 2008-Apr-26 22:59:45 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 6 dB 2008-Apr-26 22:59:45 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-26 22:59:45 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 3 3 dB 2008-Apr-26 22:59:45 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-26 22:59:45 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-26 22:59:45 LOG5 end_task: Level: (5) ID = <10465> Status = 0 0 0 0 ok 2008-Apr-26 22:59:45 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.937 1.048 ALFA beam 1: 0.894 1.075 2008-Apr-26 22:59:45 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.056 0.985 ALFA beam 3: 1.056 1.114 2008-Apr-26 22:59:45 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.980 1.016 ALFA beam 5: 1.078 0.933 2008-Apr-26 22:59:45 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.092 1.085 ALFA beam 7: 0.950 0.968 2008-Apr-26 22:59:45 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-26 22:59:45 LOG5 finish_task: Level: (4) ID = <10464> Status = 0 0 0 0 ok 2008-Apr-26 22:59:45 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-26 22:59:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 22:59:45 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-26 22:59:45 LOG5 end_task: Level: (4) ID = <10464> Status = 0 0 0 0 ok 2008-Apr-26 22:59:45 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-26 22:59:45 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-26 22:59:45 LOG5 finish_task: Level: (3) ID = <10462> Status = 0 0 0 0 ok 2008-Apr-26 22:59:45 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-26 22:59:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 22:59:45 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-26 22:59:45 LOG5 end_task: Level: (3) ID = <10462> Status = 0 0 0 0 ok 2008-Apr-26 22:59:45 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 SS 2008-Apr-26 22:59:45 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 SS 2008-Apr-26 22:59:45 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 SS 2008-Apr-26 22:59:45 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 SS 2008-Apr-26 22:59:45 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-26 22:59:45 START begin_task: Starting task 'WAPP calibration' 2008-Apr-26 22:59:45 LOG5 begin_task: Level: (3) ID = <10466> Status = 0 0 0 0 ok 2008-Apr-26 22:59:45 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-26 22:59:45 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-26 22:59:45 START begin_task: Starting task 'selecting calibration type' 2008-Apr-26 22:59:45 LOG5 begin_task: Level: (4) ID = <10467> Status = 0 0 0 0 ok 2008-Apr-26 22:59:45 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-26 22:59:45 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-26 22:59:45 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 22:59:45 START begin_task: Starting task 'waiting on setcal' 2008-Apr-26 22:59:45 LOG5 begin_task: Level: (5) ID = <10468> Status = 0 0 0 0 ok 2008-Apr-26 22:59:45 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 SS' 2008-Apr-26 22:59:46 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-26 22:59:46 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 22:59:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 22:59:46 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-26 22:59:46 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-26 22:59:46 LOG5 end_task: Level: (5) ID = <10468> Status = 0 0 0 0 ok 2008-Apr-26 22:59:46 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-26 22:59:46 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-26 22:59:46 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-26 22:59:46 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-26 22:59:46 LOG5 begin_task: Level: (5) ID = <10469> Status = 0 0 0 0 ok 2008-Apr-26 22:59:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 22:59:46 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-26 22:59:46 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-26 22:59:46 LOG5 end_task: Level: (5) ID = <10469> Status = 0 0 0 0 ok 2008-Apr-26 22:59:46 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-26 22:59:46 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-26 22:59:46 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-26 22:59:46 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-26 22:59:46 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-26 22:59:46 LOG5 begin_task: Level: (5) ID = <10470> Status = 0 0 0 0 ok 2008-Apr-26 22:59:46 NOTE WAPPDATA-new_file: New FITS file: wapp.20080426.a2048.0011.fits 2008-Apr-26 22:59:46 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-26 22:59:46 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-26 22:59:46 LOG5 end_task: Level: (5) ID = <10470> Status = 0 0 0 0 ok 2008-Apr-26 22:59:46 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-26 22:59:46 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-26 22:59:46 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-26 22:59:46 LOG5 finish_task: Level: (4) ID = <10467> Status = 0 0 0 0 ok 2008-Apr-26 22:59:46 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-26 22:59:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 22:59:46 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-26 22:59:46 LOG5 end_task: Level: (4) ID = <10467> Status = 0 0 0 0 ok 2008-Apr-26 22:59:46 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-26 22:59:46 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-26 22:59:46 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-26 22:59:46 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-26 22:59:46 LOG5 begin_task: Level: (4) ID = <10471> Status = 0 0 0 0 ok 2008-Apr-26 22:59:46 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080426.a2048.0011.fits} 2008-Apr-26 22:59:46 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-26 22:59:46 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-26 22:59:46 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-26 22:59:46 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-26 22:59:46 LOG5 end_task: Level: (4) ID = <10471> Status = 0 0 0 0 ok 2008-Apr-26 22:59:46 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-26 22:59:46 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-26 22:59:46 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-26 22:59:46 LOG5 begin_task: Level: (4) ID = <10472> Status = 0 0 0 0 ok 2008-Apr-26 22:59:46 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-26 22:59:46 LOG5 log_alfabeam: Parameters: 12.13422222222222 7.0975833333333336 12.910688 2008.3229518721323 -20.200006 2008-Apr-26 22:59:46 LOG4 log_alfabeam: ALFABEAM 0 12.134222222222220 7.097583333333326 2008-Apr-26 22:59:46 LOG4 log_alfabeam: ALFABEAM 1 12.134007795561089 7.195373340320434 2008-Apr-26 22:59:46 LOG4 log_alfabeam: ALFABEAM 2 12.128348904864799 7.130590111259978 2008-Apr-26 22:59:46 LOG4 log_alfabeam: ALFABEAM 3 12.128580087478898 7.032484768874731 2008-Apr-26 22:59:46 LOG4 log_alfabeam: ALFABEAM 4 12.134478995132081 6.999605682279676 2008-Apr-26 22:59:46 LOG4 log_alfabeam: ALFABEAM 5 12.140096857872598 7.065151912215178 2008-Apr-26 22:59:46 LOG4 log_alfabeam: ALFABEAM 6 12.139856940717328 7.162815518616374 2008-Apr-26 22:59:46 INFO2 take_spectra: Starting WAPP scan: 811700484 2008-Apr-26 22:59:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-26 22:59:47 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-26 22:59:47 LOG5 begin_task: Level: (5) ID = <10473> Status = 0 0 0 0 ok 2008-Apr-26 22:59:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-26 22:59:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10788.00 2008-Apr-26 22:59:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.161713 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-26 22:59:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.161713 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-26 22:59:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.161713 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-26 22:59:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.161713 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-26 22:59:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.161713 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-26 22:59:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.161713 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 22:59:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.161713 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 22:59:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.161713 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 22:59:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.161713 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 22:59:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-26 22:59:53 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-26 22:59:53 LOG5 end_task: Level: (5) ID = <10473> Status = 0 0 0 0 ok 2008-Apr-26 22:59:53 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-26 22:59:53 LOG5 end_task: Level: (4) ID = <10472> Status = 0 0 0 0 ok 2008-Apr-26 22:59:53 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-26 22:59:53 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-26 22:59:53 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-26 22:59:53 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-26 22:59:53 LOG5 begin_task: Level: (4) ID = <10474> Status = 0 0 0 0 ok 2008-Apr-26 22:59:53 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-26 22:59:53 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-26 22:59:53 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-26 22:59:53 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-26 22:59:53 LOG5 end_task: Level: (4) ID = <10474> Status = 0 0 0 0 ok 2008-Apr-26 22:59:53 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-26 22:59:53 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-26 22:59:53 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-26 22:59:53 LOG5 begin_task: Level: (4) ID = <10475> Status = 0 0 0 0 ok 2008-Apr-26 22:59:53 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-26 22:59:53 LOG5 log_alfabeam: Parameters: 12.13422222222222 7.0975833333333336 12.912638 2008.322952093949 -20.200006 2008-Apr-26 22:59:53 LOG4 log_alfabeam: ALFABEAM 0 12.134222222222219 7.097583333333328 2008-Apr-26 22:59:53 LOG4 log_alfabeam: ALFABEAM 1 12.134015766814017 7.195377279784754 2008-Apr-26 22:59:53 LOG4 log_alfabeam: ALFABEAM 2 12.128351606526877 7.130696118879213 2008-Apr-26 22:59:53 LOG4 log_alfabeam: ALFABEAM 3 12.128574773848248 7.032586953965092 2008-Apr-26 22:59:53 LOG4 log_alfabeam: ALFABEAM 4 12.134470955633844 6.999601225442098 2008-Apr-26 22:59:53 LOG4 log_alfabeam: ALFABEAM 5 12.140094199366724 7.065045095278970 2008-Apr-26 22:59:53 LOG4 log_alfabeam: ALFABEAM 6 12.139862277472430 7.162713270082428 2008-Apr-26 22:59:53 INFO2 take_spectra: Starting WAPP scan: 811700485 2008-Apr-26 22:59:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-26 22:59:54 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-26 22:59:54 LOG5 begin_task: Level: (5) ID = <10476> Status = 0 0 0 0 ok 2008-Apr-26 22:59:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-26 22:59:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10795.00 2008-Apr-26 22:59:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.502 > 1.4)! 2008-Apr-26 22:59:59 LOG4 check_wapp_levels: WAPP-1 power levels: 1.277 1.335 1.200 1.454 2008-Apr-26 22:59:59 LOG4 check_wapp_levels: WAPP-2 power levels: 1.426 1.351 1.434 1.502 2008-Apr-26 22:59:59 LOG4 check_wapp_levels: WAPP-3 power levels: 1.348 1.395 1.477 1.241 2008-Apr-26 22:59:59 LOG4 check_wapp_levels: WAPP-4 power levels: 1.499 1.493 1.305 1.333 2008-Apr-26 23:00:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.161713 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-26 23:00:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.161713 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-26 23:00:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.161713 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-26 23:00:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.161713 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-26 23:00:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.161713 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-26 23:00:00 LOG3 WAPP=1+3+4-save_rfcalc: Channel 5: Sky freq = 1381.161713 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 23:00:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.161713 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 23:00:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.161713 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 23:00:00 LOG3 WAPP=1+3+4-save_rfcalc: Channel 8: Sky freq = 1381.161713 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 23:00:00 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-26 23:00:00 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-26 23:00:00 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-26 23:00:00 LOG5 end_task: Level: (5) ID = <10476> Status = 0 0 0 0 ok 2008-Apr-26 23:00:00 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-26 23:00:00 LOG5 end_task: Level: (4) ID = <10475> Status = 0 0 0 0 ok 2008-Apr-26 23:00:00 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-26 23:00:00 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-26 23:00:00 LOG5 finish_task: Level: (3) ID = <10466> Status = 0 0 0 0 ok 2008-Apr-26 23:00:00 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-26 23:00:00 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 23:00:00 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-26 23:00:00 LOG5 end_task: Level: (3) ID = <10466> Status = 0 0 0 0 ok 2008-Apr-26 23:00:00 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-26 23:00:00 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 46.20 and ZA = 15.91 2008-Apr-26 23:00:00 LOG3 track_source: Calling 'track_source AGESVC1A_p2_077 46.20 15.9084902016 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-26 23:00:00 START begin_task: Starting task 'sending tracking commands' 2008-Apr-26 23:00:00 LOG5 begin_task: Level: (3) ID = <10477> Status = 0 0 0 0 ok 2008-Apr-26 23:00:00 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_077} INFO {Slewing to source 'AGESVC1A_p2_077' ...} 2008-Apr-26 23:00:00 INFO1 track_source: Starting to track AGESVC1A_p2_077 2008-Apr-26 23:00:00 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_077" 2008-Apr-26 23:00:00 LOG3 vw_send: To DATATAKING: set ra 46.20 2008-Apr-26 23:00:00 LOG3 vw_send: To DATATAKING: set dec 15.9084902016 2008-Apr-26 23:00:00 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-26 23:00:00 LOG3 vw_send: To DATATAKING: pnt tr 46.20 15.9084902016 -CF 2008-Apr-26 23:00:00 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-26 23:00:00 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-26 23:00:00 LOG5 finish_task: Level: (3) ID = <10477> Status = 0 0 0 0 ok 2008-Apr-26 23:00:00 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-26 23:00:01 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 23:00:01 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-26 23:00:01 LOG5 end_task: Level: (3) ID = <10477> Status = 0 0 0 0 ok 2008-Apr-26 23:00:01 LOG1 fixed_driftmap: Parameters: HA = +00:45:59.7 Start = 12:55:26.8 LST = 12:54:52.5 diff = 34.3 secs 2008-Apr-26 23:00:01 INFO2 fixed_driftmap: Waiting 32.3 seconds for RA 12:09:27 2008-Apr-26 23:00:01 INFO2 lstwait: Waiting for 32.2 secs from LST 12:54:53 to LST 12:55:25 ... 2008-Apr-26 23:00:01 LOG4 send_obs_status: To obs_status: <1> TASKTIME 32.225939071110027 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-26 23:00:01 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-26 23:00:01 LOG5 begin_task: Level: (3) ID = <10478> Status = 0 0 0 0 ok 2008-Apr-26 23:00:01 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_077" 2008-Apr-26 23:00:01 LOG3 WAPP=2-save_rfcalc: Channel 5: Sky freq = 1381.161713 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 23:00:01 LOG3 WAPP=2-save_rfcalc: Channel 8: Sky freq = 1381.161713 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 23:00:01 LOG4 got_cormsg: From DATATAKING: set ra 46.20 2008-Apr-26 23:00:01 LOG4 got_cormsg: From DATATAKING: set dec 15.9084902016 2008-Apr-26 23:00:01 LOG4 got_cormsg: From DATATAKING: vw% 46.20 2008-Apr-26 23:00:01 LOG4 got_cormsg: From DATATAKING: vw% 15.9084902016 2008-Apr-26 23:00:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 23:00:01 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-26 23:00:01 LOG4 got_cormsg: From DATATAKING: pnt tr 46.20 15.9084902016 -CF 2008-Apr-26 23:00:01 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-26 23:00:01 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-26 23:00:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 23:00:05 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.894 and 1.115 2008-Apr-26 23:00:33 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-26 23:00:33 LOG5 end_task: Level: (3) ID = <10478> Status = 0 0 0 0 ok 2008-Apr-26 23:00:33 LOG4 lstwait: Finished waiting, the gui caused difference: 0.77703031999760697 2008-Apr-26 23:00:33 INFO3 lstwait: Finished waiting 2008-Apr-26 23:00:33 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-26 23:00:33 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-26 23:00:33 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-26 23:00:33 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-26 23:00:33 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-26 23:00:33 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-26 23:00:33 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-26 23:00:33 LOG5 begin_task: Level: (3) ID = <10479> Status = 0 0 0 0 ok 2008-Apr-26 23:00:33 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-26 23:00:33 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-26 23:00:33 INFO2 take_spectra: Starting WAPP scan: 811700486 2008-Apr-26 23:00:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-26 23:00:34 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-26 23:00:34 LOG5 begin_task: Level: (4) ID = <10480> Status = 0 0 0 0 ok 2008-Apr-26 23:00:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-26 23:00:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10835.00 2008-Apr-26 23:00:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.161713 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-26 23:00:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.161713 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-26 23:00:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.161713 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-26 23:00:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.161713 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-26 23:00:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.161713 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-26 23:00:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.161713 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 23:00:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.161713 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 23:00:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.161713 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 23:00:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.161713 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 23:20:35 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-26 23:20:35 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-26 23:20:35 LOG5 end_task: Level: (4) ID = <10480> Status = 0 0 0 0 ok 2008-Apr-26 23:20:35 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-26 23:20:35 LOG5 end_task: Level: (3) ID = <10479> Status = 0 0 0 0 ok 2008-Apr-26 23:20:35 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-26 23:20:35 LOG5 finish_task: Level: (2) ID = <10446> Status = 0 0 0 0 ok 2008-Apr-26 23:20:35 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-26 23:20:35 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-26 23:20:35 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-26 23:20:35 LOG5 end_task: Level: (2) ID = <10446> Status = 0 0 0 0 ok 2008-Apr-26 23:20:35 COMMAND run_command_line: EXECUTING command 51: 'FIXEDDRIFT az=47.75 alfaangle=-21.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p1_063 ra=122900.00 dec=72700.00' 2008-Apr-26 23:20:35 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-26 23:20:36 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-26 23:20:36 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 47.75 -21.6 hcorcal 5 tracking no first 1 AGESVC1B_p1_063 122900.00 72700.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-26 23:20:36 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-26 23:20:36 LOG5 begin_task: Level: (2) ID = <10481> Status = 0 0 0 0 ok 2008-Apr-26 23:20:36 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGESVC1A_p2_077' 2008-Apr-26 23:20:36 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-26 23:20:36 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1B_p1_063} 2008-Apr-26 23:20:36 INFO3 fixed_driftmap: Sending telescope to Az = 47.75 and ZA = 15.83 2008-Apr-26 23:20:36 LOG3 track_source: Calling 'track_source AGESVC1B_p1_063 47.75 15.8333872816 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-26 23:20:36 START begin_task: Starting task 'sending tracking commands' 2008-Apr-26 23:20:36 LOG5 begin_task: Level: (3) ID = <10482> Status = 0 0 0 0 ok 2008-Apr-26 23:20:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p1_063} INFO {Slewing to source 'AGESVC1B_p1_063' ...} 2008-Apr-26 23:20:36 INFO1 track_source: Starting to track AGESVC1B_p1_063 2008-Apr-26 23:20:36 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p1_063" 2008-Apr-26 23:20:36 LOG3 vw_send: To DATATAKING: set ra 47.75 2008-Apr-26 23:20:36 LOG3 vw_send: To DATATAKING: set dec 15.8333872816 2008-Apr-26 23:20:36 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-26 23:20:36 LOG3 vw_send: To DATATAKING: pnt tr 47.75 15.8333872816 -CF 2008-Apr-26 23:20:36 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-26 23:20:36 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-26 23:20:36 LOG5 finish_task: Level: (3) ID = <10482> Status = 0 0 0 0 ok 2008-Apr-26 23:20:36 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-26 23:20:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 23:20:36 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-26 23:20:36 LOG5 end_task: Level: (3) ID = <10482> Status = 0 0 0 0 ok 2008-Apr-26 23:20:36 START begin_task: Starting task 'rotate ALFA to -21.6 degrees' 2008-Apr-26 23:20:36 LOG5 begin_task: Level: (3) ID = <10483> Status = 0 0 0 0 ok 2008-Apr-26 23:20:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -21.6 degrees ...} 2008-Apr-26 23:20:36 INFO2 rotate_alfa: ALFA commanded to -21.6 degrees 2008-Apr-26 23:20:36 LOG3 sock_errsend: To ALFAMOTOR: POSITION -21.6 REPLY 2008-Apr-26 23:20:36 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-26 23:20:36 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-26 23:20:36 LOG5 begin_task: Level: (4) ID = <10484> Status = 0 0 0 0 ok 2008-Apr-26 23:20:36 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p1_063" 2008-Apr-26 23:20:36 LOG4 got_cormsg: From DATATAKING: set ra 47.75 2008-Apr-26 23:20:36 LOG4 got_cormsg: From DATATAKING: set dec 15.8333872816 2008-Apr-26 23:20:36 LOG4 got_cormsg: From DATATAKING: vw% 47.75 2008-Apr-26 23:20:36 LOG4 got_cormsg: From DATATAKING: vw% 15.8333872816 2008-Apr-26 23:20:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 23:20:36 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-26 23:20:36 LOG4 got_cormsg: From DATATAKING: pnt tr 47.75 15.8333872816 -CF 2008-Apr-26 23:20:36 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-26 23:20:36 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-26 23:20:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 23:20:39 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-26 23:20:39 INFO3 alfa_motor: ALFA rotator in-position -21.60 degrees 2008-Apr-26 23:20:39 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-26 23:20:39 LOG5 end_task: Level: (4) ID = <10484> Status = 0 0 0 0 ok 2008-Apr-26 23:20:39 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-26 23:20:39 STOP finish_task: Finishing task 'rotate ALFA to -21.6 degrees' 2008-Apr-26 23:20:39 LOG5 finish_task: Level: (3) ID = <10483> Status = 0 0 0 0 ok 2008-Apr-26 23:20:39 INFO2 finish_task: DONE finished configuration: rotating ALFA to -21.6 degrees 2008-Apr-26 23:20:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 23:20:39 STOP end_task: Finishing task 'rotate ALFA to -21.6 degrees' with status 'OK' 2008-Apr-26 23:20:39 LOG5 end_task: Level: (3) ID = <10483> Status = 0 0 0 0 ok 2008-Apr-26 23:20:39 START begin_task: Starting task 'waiting on telescope' 2008-Apr-26 23:20:39 LOG5 begin_task: Level: (3) ID = <10485> Status = 0 0 0 0 ok 2008-Apr-26 23:20:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-26 23:20:39 LOG3 waittrk: Start waittrk 5 2008-Apr-26 23:20:39 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-26 23:20:39 LOG5 begin_task: Level: (4) ID = <10486> Status = 0 0 0 0 ok 2008-Apr-26 23:20:44 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-26 23:20:44 LOG5 end_task: Level: (4) ID = <10486> Status = 0 0 0 0 ok 2008-Apr-26 23:20:44 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-26 23:20:44 LOG5 begin_task: Level: (4) ID = <10487> Status = 0 0 0 0 ok 2008-Apr-26 23:20:56 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-26 23:20:56 LOG5 end_task: Level: (4) ID = <10487> Status = 0 0 0 0 ok 2008-Apr-26 23:20:56 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-26 23:20:56 INFO2 waittrk: Now tracking AGESVC1B_p1_063 2008-Apr-26 23:20:56 LOG4 waittrk: Current telescope position: Az = 407.52 ZA = 15.82 2008-Apr-26 23:20:56 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-26 23:20:56 LOG5 finish_task: Level: (3) ID = <10485> Status = 0 0 0 0 ok 2008-Apr-26 23:20:56 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-26 23:20:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 23:20:56 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-26 23:20:56 LOG5 end_task: Level: (3) ID = <10485> Status = 0 0 0 0 ok 2008-Apr-26 23:20:56 START begin_task: Starting task 'selecting calibration type' 2008-Apr-26 23:20:56 LOG5 begin_task: Level: (3) ID = <10488> Status = 0 0 0 0 ok 2008-Apr-26 23:20:56 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-26 23:20:56 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-26 23:20:56 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 23:20:56 START begin_task: Starting task 'waiting on setcal' 2008-Apr-26 23:20:56 LOG5 begin_task: Level: (4) ID = <10489> Status = 0 0 0 0 ok 2008-Apr-26 23:20:56 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-26 23:20:56 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 23:20:57 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 23:20:57 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-26 23:20:57 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-26 23:20:57 LOG5 end_task: Level: (4) ID = <10489> Status = 0 0 0 0 ok 2008-Apr-26 23:20:57 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-26 23:20:57 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-26 23:20:57 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-26 23:20:57 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-26 23:20:57 LOG5 begin_task: Level: (4) ID = <10490> Status = 0 0 0 0 ok 2008-Apr-26 23:20:57 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 23:20:57 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-26 23:20:57 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-26 23:20:57 LOG5 end_task: Level: (4) ID = <10490> Status = 0 0 0 0 ok 2008-Apr-26 23:20:58 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-26 23:20:58 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-26 23:20:58 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-26 23:20:58 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-26 23:20:58 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-26 23:20:58 LOG5 begin_task: Level: (4) ID = <10491> Status = 0 0 0 0 ok 2008-Apr-26 23:20:58 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-26 23:20:58 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-26 23:20:58 LOG5 end_task: Level: (4) ID = <10491> Status = 0 0 0 0 ok 2008-Apr-26 23:20:58 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-26 23:20:58 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-26 23:20:58 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-26 23:20:58 LOG5 finish_task: Level: (3) ID = <10488> Status = 0 0 0 0 ok 2008-Apr-26 23:20:58 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-26 23:20:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 23:20:58 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-26 23:20:58 LOG5 end_task: Level: (3) ID = <10488> Status = 0 0 0 0 ok 2008-Apr-26 23:20:58 LOG5 dopset_later: Calling 'dopset_later 34.296145423865106' 2008-Apr-26 23:20:58 INFO3 dopset_later: Setting Doppler correction for 23:21:31 (34.3 seconds from now) 2008-Apr-26 23:20:58 LOG5 antvel: Calling 'antvel 47.750000 15.833387 F 34.296145423865106' 2008-Apr-26 23:20:58 LOG2 antvel: Parameters to Doppler: Heliocentric 98491 2008 117 0.0 2008-Apr-26 23:20:58 INFO5 antvel: Computed antenna velocity: +15.77611 km/s 2008-Apr-26 23:20:58 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=15.776107711 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-26 23:20:58 INFO4 dopset_gen: New sky frequencies: 1381.170747 1381.170747 1381.170747 1381.170747 1381.170747 1381.170747 1381.170747 1381.170747 1381.170747 2008-Apr-26 23:20:58 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.170747 sky0=1381.170747 sky1=1381.170747 sky2=1381.170747 sky3=1381.170747 sky4=1381.170747 sky5=1381.170747 sky6=1381.170747 sky7=1381.170747 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-26 23:20:58 LOG2 dopset_gen: Result from 'sky2syn': 1631.170747 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-26 23:20:58 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631170747.0} 2008-Apr-26 23:20:58 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 23:20:58 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-26 23:20:58 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-26 23:20:58 INFO5 fixed_driftmap: Tracking J2000 position: RA = 12:28:30.3 Dec = +07:26:50.5 2008-Apr-26 23:20:58 LOG3 track_source: Calling 'track_source AGESVC1B_p1_063 122830.3 072650.5 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-26 23:20:58 START begin_task: Starting task 'sending tracking commands' 2008-Apr-26 23:20:58 LOG5 begin_task: Level: (3) ID = <10492> Status = 0 0 0 0 ok 2008-Apr-26 23:20:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p1_063} INFO {Slewing to source 'AGESVC1B_p1_063' ...} 2008-Apr-26 23:20:58 INFO1 track_source: Starting to track AGESVC1B_p1_063 2008-Apr-26 23:20:58 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p1_063" 2008-Apr-26 23:20:58 LOG3 vw_send: To DATATAKING: set ra 122830.3 2008-Apr-26 23:20:58 LOG3 vw_send: To DATATAKING: set dec 072650.5 2008-Apr-26 23:20:58 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-26 23:20:58 LOG3 vw_send: To DATATAKING: pnt tr 122830.3 072650.5 -CJ 2008-Apr-26 23:20:58 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-26 23:20:58 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-26 23:20:58 LOG5 finish_task: Level: (3) ID = <10492> Status = 0 0 0 0 ok 2008-Apr-26 23:20:58 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-26 23:20:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 23:20:58 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-26 23:20:58 LOG5 end_task: Level: (3) ID = <10492> Status = 0 0 0 0 ok 2008-Apr-26 23:20:58 START begin_task: Starting task 'waiting on telescope' 2008-Apr-26 23:20:58 LOG5 begin_task: Level: (3) ID = <10493> Status = 0 0 0 0 ok 2008-Apr-26 23:20:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-26 23:20:58 LOG3 waittrk: Start waittrk 5 2008-Apr-26 23:20:58 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-26 23:20:58 LOG5 begin_task: Level: (4) ID = <10494> Status = 0 0 0 0 ok 2008-Apr-26 23:20:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631170747.0} 2008-Apr-26 23:20:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 23:20:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 23:20:58 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p1_063" 2008-Apr-26 23:20:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 23:20:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 23:20:58 LOG4 got_cormsg: From DATATAKING: set ra 122830.3 2008-Apr-26 23:20:58 LOG4 got_cormsg: From DATATAKING: set dec 072650.5 2008-Apr-26 23:20:58 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-26 23:20:58 LOG4 got_cormsg: From DATATAKING: pnt tr 122830.3 072650.5 -CJ 2008-Apr-26 23:20:58 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-26 23:20:58 LOG4 got_cormsg: From DATATAKING: 122830.3 2008-Apr-26 23:20:58 LOG4 got_cormsg: From DATATAKING: vw% 072650.5 2008-Apr-26 23:20:58 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2008-Apr-26 23:21:03 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-26 23:21:03 LOG5 end_task: Level: (4) ID = <10494> Status = 0 0 0 0 ok 2008-Apr-26 23:21:03 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-26 23:21:03 LOG5 begin_task: Level: (4) ID = <10495> Status = 0 0 0 0 ok 2008-Apr-26 23:21:05 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-26 23:21:05 LOG5 end_task: Level: (4) ID = <10495> Status = 0 0 0 0 ok 2008-Apr-26 23:21:05 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-26 23:21:05 INFO2 waittrk: Now tracking AGESVC1B_p1_063 2008-Apr-26 23:21:05 LOG4 waittrk: Current telescope position: Az = 407.56 ZA = 15.83 2008-Apr-26 23:21:05 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-26 23:21:05 LOG5 finish_task: Level: (3) ID = <10493> Status = 0 0 0 0 ok 2008-Apr-26 23:21:05 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-26 23:21:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 23:21:05 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-26 23:21:05 LOG5 end_task: Level: (3) ID = <10493> Status = 0 0 0 0 ok 2008-Apr-26 23:21:05 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-26 23:21:05 LOG5 begin_task: Level: (3) ID = <10496> Status = 0 0 0 0 ok 2008-Apr-26 23:21:05 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-26 23:21:05 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-26 23:21:05 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-26 23:21:06 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-26 23:21:06 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 23:21:06 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-26 23:21:06 LOG5 begin_task: Level: (4) ID = <10497> Status = 0 0 0 0 ok 2008-Apr-26 23:21:06 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-26 23:21:06 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 23:21:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 23:21:08 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-26 23:21:08 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-26 23:21:08 LOG5 end_task: Level: (4) ID = <10497> Status = 0 0 0 0 ok 2008-Apr-26 23:21:08 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-26 23:21:08 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-26 23:21:08 LOG5 begin_task: Level: (4) ID = <10498> Status = 0 0 0 0 ok 2008-Apr-26 23:21:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-26 23:21:08 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-26 23:21:09 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-26 23:21:09 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-26 23:21:09 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-26 23:21:09 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-26 23:21:09 LOG5 begin_task: Level: (5) ID = <10499> Status = 0 0 0 0 ok 2008-Apr-26 23:21:09 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-26 23:21:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 23:21:09 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 1 dB --- beam 1: 8 6 dB 2008-Apr-26 23:21:09 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 6 dB 2008-Apr-26 23:21:09 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-26 23:21:09 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 3 3 dB 2008-Apr-26 23:21:09 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-26 23:21:09 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-26 23:21:09 LOG5 end_task: Level: (5) ID = <10499> Status = 0 0 0 0 ok 2008-Apr-26 23:21:09 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.940 1.051 ALFA beam 1: 0.896 1.075 2008-Apr-26 23:21:09 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.066 0.993 ALFA beam 3: 1.061 1.117 2008-Apr-26 23:21:09 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.986 1.022 ALFA beam 5: 1.085 0.939 2008-Apr-26 23:21:09 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.095 1.085 ALFA beam 7: 0.953 0.970 2008-Apr-26 23:21:09 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-26 23:21:09 LOG5 finish_task: Level: (4) ID = <10498> Status = 0 0 0 0 ok 2008-Apr-26 23:21:09 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-26 23:21:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 23:21:09 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-26 23:21:09 LOG5 end_task: Level: (4) ID = <10498> Status = 0 0 0 0 ok 2008-Apr-26 23:21:09 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-26 23:21:09 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-26 23:21:09 LOG5 finish_task: Level: (3) ID = <10496> Status = 0 0 0 0 ok 2008-Apr-26 23:21:09 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-26 23:21:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 23:21:09 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-26 23:21:09 LOG5 end_task: Level: (3) ID = <10496> Status = 0 0 0 0 ok 2008-Apr-26 23:21:09 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 SS 2008-Apr-26 23:21:09 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 SS 2008-Apr-26 23:21:09 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 SS 2008-Apr-26 23:21:09 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 SS 2008-Apr-26 23:21:09 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-26 23:21:09 START begin_task: Starting task 'WAPP calibration' 2008-Apr-26 23:21:09 LOG5 begin_task: Level: (3) ID = <10500> Status = 0 0 0 0 ok 2008-Apr-26 23:21:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-26 23:21:09 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-26 23:21:09 START begin_task: Starting task 'selecting calibration type' 2008-Apr-26 23:21:09 LOG5 begin_task: Level: (4) ID = <10501> Status = 0 0 0 0 ok 2008-Apr-26 23:21:10 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-26 23:21:10 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-26 23:21:10 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 23:21:10 START begin_task: Starting task 'waiting on setcal' 2008-Apr-26 23:21:10 LOG5 begin_task: Level: (5) ID = <10502> Status = 0 0 0 0 ok 2008-Apr-26 23:21:10 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 SS' 2008-Apr-26 23:21:10 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-26 23:21:10 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 23:21:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 23:21:10 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-26 23:21:10 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-26 23:21:10 LOG5 end_task: Level: (5) ID = <10502> Status = 0 0 0 0 ok 2008-Apr-26 23:21:10 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-26 23:21:10 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-26 23:21:10 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-26 23:21:10 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-26 23:21:10 LOG5 begin_task: Level: (5) ID = <10503> Status = 0 0 0 0 ok 2008-Apr-26 23:21:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 23:21:10 NOTE WAPPDATA-new_file: New FITS file: wapp.20080426.a2048.0012.fits 2008-Apr-26 23:21:10 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080426.a2048.0012.fits} 2008-Apr-26 23:21:10 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-26 23:21:10 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-26 23:21:10 LOG5 end_task: Level: (5) ID = <10503> Status = 0 0 0 0 ok 2008-Apr-26 23:21:10 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-26 23:21:10 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-26 23:21:10 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-26 23:21:10 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-26 23:21:10 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-26 23:21:10 LOG5 begin_task: Level: (5) ID = <10504> Status = 0 0 0 0 ok 2008-Apr-26 23:21:10 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-26 23:21:10 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-26 23:21:10 LOG5 end_task: Level: (5) ID = <10504> Status = 0 0 0 0 ok 2008-Apr-26 23:21:10 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-26 23:21:10 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-26 23:21:10 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-26 23:21:10 LOG5 finish_task: Level: (4) ID = <10501> Status = 0 0 0 0 ok 2008-Apr-26 23:21:10 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-26 23:21:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 23:21:10 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-26 23:21:10 LOG5 end_task: Level: (4) ID = <10501> Status = 0 0 0 0 ok 2008-Apr-26 23:21:10 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-26 23:21:10 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-26 23:21:10 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-26 23:21:10 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-26 23:21:10 LOG5 begin_task: Level: (4) ID = <10505> Status = 0 0 0 0 ok 2008-Apr-26 23:21:11 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-26 23:21:11 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-26 23:21:11 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-26 23:21:11 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-26 23:21:11 LOG5 end_task: Level: (4) ID = <10505> Status = 0 0 0 0 ok 2008-Apr-26 23:21:11 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-26 23:21:11 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-26 23:21:11 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-26 23:21:11 LOG5 begin_task: Level: (4) ID = <10506> Status = 0 0 0 0 ok 2008-Apr-26 23:21:11 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-26 23:21:11 LOG5 log_alfabeam: Parameters: 12.475083333333334 7.4473611111111113 13.268331 2008.322992559637 -21.600107 2008-Apr-26 23:21:11 LOG4 log_alfabeam: ALFABEAM 0 12.475083333333330 7.447361111111115 2008-Apr-26 23:21:11 LOG4 log_alfabeam: ALFABEAM 1 12.474873396581861 7.544781410396698 2008-Apr-26 23:21:11 LOG4 log_alfabeam: ALFABEAM 2 12.469184738718083 7.480310158795137 2008-Apr-26 23:21:11 LOG4 log_alfabeam: ALFABEAM 3 12.469412463370517 7.382557505676047 2008-Apr-26 23:21:11 LOG4 log_alfabeam: ALFABEAM 4 12.475335822061805 7.349749012053134 2008-Apr-26 23:21:11 LOG4 log_alfabeam: ALFABEAM 5 12.480982801522755 7.414997979499184 2008-Apr-26 23:21:11 LOG4 log_alfabeam: ALFABEAM 6 12.480748205177198 7.512279065291533 2008-Apr-26 23:21:11 INFO2 take_spectra: Starting WAPP scan: 811700487 2008-Apr-26 23:21:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-26 23:21:11 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-26 23:21:11 LOG5 begin_task: Level: (5) ID = <10507> Status = 0 0 0 0 ok 2008-Apr-26 23:21:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-26 23:21:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12072.00 2008-Apr-26 23:21:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.170747 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-26 23:21:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.170747 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-26 23:21:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.170747 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-26 23:21:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.170747 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-26 23:21:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.170747 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-26 23:21:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.170747 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 23:21:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.170747 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 23:21:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.170747 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 23:21:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.170747 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 23:21:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-26 23:21:17 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-26 23:21:17 LOG5 end_task: Level: (5) ID = <10507> Status = 0 0 0 0 ok 2008-Apr-26 23:21:17 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-26 23:21:17 LOG5 end_task: Level: (4) ID = <10506> Status = 0 0 0 0 ok 2008-Apr-26 23:21:17 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-26 23:21:17 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-26 23:21:17 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-26 23:21:17 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-26 23:21:17 LOG5 begin_task: Level: (4) ID = <10508> Status = 0 0 0 0 ok 2008-Apr-26 23:21:17 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-26 23:21:17 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-26 23:21:17 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-26 23:21:17 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-26 23:21:17 LOG5 end_task: Level: (4) ID = <10508> Status = 0 0 0 0 ok 2008-Apr-26 23:21:17 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-26 23:21:17 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-26 23:21:17 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-26 23:21:17 LOG5 begin_task: Level: (4) ID = <10509> Status = 0 0 0 0 ok 2008-Apr-26 23:21:17 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-26 23:21:17 LOG5 log_alfabeam: Parameters: 12.475083333333334 7.4473611111111113 13.270281 2008.3229927814536 -21.600107 2008-Apr-26 23:21:17 LOG4 log_alfabeam: ALFABEAM 0 12.475083333333330 7.447361111111121 2008-Apr-26 23:21:17 LOG4 log_alfabeam: ALFABEAM 1 12.474881149662249 7.544785183783770 2008-Apr-26 23:21:17 LOG4 log_alfabeam: ALFABEAM 2 12.469187372434726 7.480413935191415 2008-Apr-26 23:21:17 LOG4 log_alfabeam: ALFABEAM 3 12.469407297319338 7.382657650769024 2008-Apr-26 23:21:17 LOG4 log_alfabeam: ALFABEAM 4 12.475327998872284 7.349744749890253 2008-Apr-26 23:21:17 LOG4 log_alfabeam: ALFABEAM 5 12.480980211127155 7.414893363250030 2008-Apr-26 23:21:17 LOG4 log_alfabeam: ALFABEAM 6 12.480753391066340 7.512178847615625 2008-Apr-26 23:21:17 INFO2 take_spectra: Starting WAPP scan: 811700488 2008-Apr-26 23:21:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-26 23:21:18 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-26 23:21:18 LOG5 begin_task: Level: (5) ID = <10510> Status = 0 0 0 0 ok 2008-Apr-26 23:21:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-26 23:21:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12079.00 2008-Apr-26 23:21:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.516 > 1.4)! 2008-Apr-26 23:21:23 LOG4 check_wapp_levels: WAPP-1 power levels: 1.320 1.150 1.253 1.516 2008-Apr-26 23:21:23 LOG4 check_wapp_levels: WAPP-2 power levels: 1.441 1.366 1.442 1.508 2008-Apr-26 23:21:23 LOG4 check_wapp_levels: WAPP-3 power levels: 1.367 1.408 1.490 1.249 2008-Apr-26 23:21:23 LOG4 check_wapp_levels: WAPP-4 power levels: 1.506 1.496 1.312 1.337 2008-Apr-26 23:21:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.170747 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-26 23:21:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.170747 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-26 23:21:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.170747 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-26 23:21:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.170747 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-26 23:21:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.170747 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-26 23:21:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.170747 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 23:21:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.170747 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 23:21:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.170747 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 23:21:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.170747 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 23:21:24 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-26 23:21:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-26 23:21:24 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-26 23:21:24 LOG5 end_task: Level: (5) ID = <10510> Status = 0 0 0 0 ok 2008-Apr-26 23:21:24 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-26 23:21:24 LOG5 end_task: Level: (4) ID = <10509> Status = 0 0 0 0 ok 2008-Apr-26 23:21:24 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-26 23:21:24 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-26 23:21:24 LOG5 finish_task: Level: (3) ID = <10500> Status = 0 0 0 0 ok 2008-Apr-26 23:21:24 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-26 23:21:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 23:21:24 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-26 23:21:24 LOG5 end_task: Level: (3) ID = <10500> Status = 0 0 0 0 ok 2008-Apr-26 23:21:24 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-26 23:21:24 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 47.75 and ZA = 15.83 2008-Apr-26 23:21:24 LOG3 track_source: Calling 'track_source AGESVC1B_p1_063 47.75 15.8333872816 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-26 23:21:24 START begin_task: Starting task 'sending tracking commands' 2008-Apr-26 23:21:24 LOG5 begin_task: Level: (3) ID = <10511> Status = 0 0 0 0 ok 2008-Apr-26 23:21:24 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p1_063} INFO {Slewing to source 'AGESVC1B_p1_063' ...} 2008-Apr-26 23:21:24 INFO1 track_source: Starting to track AGESVC1B_p1_063 2008-Apr-26 23:21:24 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p1_063" 2008-Apr-26 23:21:24 LOG3 vw_send: To DATATAKING: set ra 47.75 2008-Apr-26 23:21:24 LOG3 vw_send: To DATATAKING: set dec 15.8333872816 2008-Apr-26 23:21:24 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-26 23:21:24 LOG3 vw_send: To DATATAKING: pnt tr 47.75 15.8333872816 -CF 2008-Apr-26 23:21:24 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-26 23:21:24 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-26 23:21:24 LOG5 finish_task: Level: (3) ID = <10511> Status = 0 0 0 0 ok 2008-Apr-26 23:21:24 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-26 23:21:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 23:21:25 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-26 23:21:25 LOG5 end_task: Level: (3) ID = <10511> Status = 0 0 0 0 ok 2008-Apr-26 23:21:25 LOG1 fixed_driftmap: Parameters: HA = +00:47:00.2 Start = 13:16:27.3 LST = 13:16:20.0 diff = 7.3 secs 2008-Apr-26 23:21:25 INFO2 fixed_driftmap: Waiting 5.3 seconds for RA 12:29:27 2008-Apr-26 23:21:25 INFO2 lstwait: Waiting for 5.3 secs from LST 13:16:20 to LST 13:16:25 ... 2008-Apr-26 23:21:25 LOG4 send_obs_status: To obs_status: <1> TASKTIME 5.2999334421028053 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-26 23:21:25 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-26 23:21:25 LOG5 begin_task: Level: (3) ID = <10512> Status = 0 0 0 0 ok 2008-Apr-26 23:21:25 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p1_063" 2008-Apr-26 23:21:25 LOG4 got_cormsg: From DATATAKING: set ra 47.75 2008-Apr-26 23:21:25 LOG4 got_cormsg: From DATATAKING: set dec 15.8333872816 2008-Apr-26 23:21:25 LOG4 got_cormsg: From DATATAKING: vw% 47.75 2008-Apr-26 23:21:25 LOG4 got_cormsg: From DATATAKING: vw% 15.8333872816 2008-Apr-26 23:21:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 23:21:25 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-26 23:21:25 LOG4 got_cormsg: From DATATAKING: pnt tr 47.75 15.8333872816 -CF 2008-Apr-26 23:21:25 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-26 23:21:25 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-26 23:21:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 23:21:29 INFO5 check_wapp_levels: WAPP power levels are between 0.711 and 1.126 (still bad) 2008-Apr-26 23:21:30 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-26 23:21:30 LOG5 end_task: Level: (3) ID = <10512> Status = 0 0 0 0 ok 2008-Apr-26 23:21:30 LOG4 lstwait: Finished waiting, the gui caused difference: 0.70115599999951428 2008-Apr-26 23:21:30 INFO3 lstwait: Finished waiting 2008-Apr-26 23:21:30 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-26 23:21:30 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-26 23:21:30 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-26 23:21:30 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-26 23:21:30 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-26 23:21:30 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-26 23:21:30 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-26 23:21:30 LOG5 begin_task: Level: (3) ID = <10513> Status = 0 0 0 0 ok 2008-Apr-26 23:21:30 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-26 23:21:30 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-26 23:21:30 INFO2 take_spectra: Starting WAPP scan: 811700489 2008-Apr-26 23:21:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-26 23:21:31 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-26 23:21:31 LOG5 begin_task: Level: (4) ID = <10514> Status = 0 0 0 0 ok 2008-Apr-26 23:21:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-26 23:21:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12092.00 2008-Apr-26 23:21:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.170747 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-26 23:21:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.170747 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-26 23:21:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.170747 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-26 23:21:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.170747 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-26 23:21:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.170747 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-26 23:21:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.170747 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 23:21:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.170747 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 23:21:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.170747 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 23:21:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.170747 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 23:21:33 INFO5 check_wapp_levels: WAPP power levels are between 0.711 and 1.126 (still bad) 2008-Apr-26 23:21:33 WARNING WAPP=1+2+3+4-start_spectra: WARNING observing when not on source 2008-Apr-26 23:21:35 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.925 and 1.126 2008-Apr-26 23:21:36 NOTE WAPP=1+2+3+4-start_spectra: Observing now on source 2008-Apr-26 23:21:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.513 < 0.8)! 2008-Apr-26 23:21:37 LOG4 check_wapp_levels: WAPP-1 power levels: 0.958 0.513 0.927 1.125 2008-Apr-26 23:21:37 LOG4 check_wapp_levels: WAPP-2 power levels: 1.064 0.992 1.060 1.115 2008-Apr-26 23:21:37 LOG4 check_wapp_levels: WAPP-3 power levels: 0.985 1.023 1.083 0.937 2008-Apr-26 23:21:37 LOG4 check_wapp_levels: WAPP-4 power levels: 1.098 1.089 0.956 0.972 2008-Apr-26 23:21:39 INFO5 check_wapp_levels: WAPP power levels are between 0.588 and 1.127 (still bad) 2008-Apr-26 23:21:41 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.930 and 1.127 2008-Apr-26 23:22:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.762 < 0.8)! 2008-Apr-26 23:22:23 LOG4 check_wapp_levels: WAPP-1 power levels: 0.954 0.762 0.925 1.126 2008-Apr-26 23:22:23 LOG4 check_wapp_levels: WAPP-2 power levels: 1.062 0.991 1.057 1.113 2008-Apr-26 23:22:23 LOG4 check_wapp_levels: WAPP-3 power levels: 0.987 1.024 1.082 0.937 2008-Apr-26 23:22:23 LOG4 check_wapp_levels: WAPP-4 power levels: 1.097 1.092 0.956 0.972 2008-Apr-26 23:22:25 INFO5 check_wapp_levels: WAPP power levels are between 0.779 and 1.125 (still bad) 2008-Apr-26 23:22:27 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.915 and 1.127 2008-Apr-26 23:22:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.626 < 0.8)! 2008-Apr-26 23:22:29 LOG4 check_wapp_levels: WAPP-1 power levels: 0.963 0.626 0.928 1.127 2008-Apr-26 23:22:29 LOG4 check_wapp_levels: WAPP-2 power levels: 1.063 0.991 1.057 1.113 2008-Apr-26 23:22:29 LOG4 check_wapp_levels: WAPP-3 power levels: 0.990 1.025 1.079 0.938 2008-Apr-26 23:22:29 LOG4 check_wapp_levels: WAPP-4 power levels: 1.097 1.091 0.956 0.974 2008-Apr-26 23:22:31 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.927 and 1.126 2008-Apr-26 23:22:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.614 < 0.8)! 2008-Apr-26 23:22:33 LOG4 check_wapp_levels: WAPP-1 power levels: 0.958 0.614 0.927 1.128 2008-Apr-26 23:22:33 LOG4 check_wapp_levels: WAPP-2 power levels: 1.061 0.991 1.057 1.114 2008-Apr-26 23:22:33 LOG4 check_wapp_levels: WAPP-3 power levels: 0.989 1.025 1.080 0.938 2008-Apr-26 23:22:33 LOG4 check_wapp_levels: WAPP-4 power levels: 1.098 1.092 0.957 0.975 2008-Apr-26 23:22:35 INFO5 check_wapp_levels: WAPP power levels are between 0.758 and 1.128 (still bad) 2008-Apr-26 23:22:37 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.916 and 1.129 2008-Apr-26 23:23:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.792 < 0.8)! 2008-Apr-26 23:23:00 LOG4 check_wapp_levels: WAPP-1 power levels: 0.957 0.792 0.921 1.125 2008-Apr-26 23:23:00 LOG4 check_wapp_levels: WAPP-2 power levels: 1.060 0.990 1.058 1.114 2008-Apr-26 23:23:00 LOG4 check_wapp_levels: WAPP-3 power levels: 0.982 1.018 1.083 0.938 2008-Apr-26 23:23:00 LOG4 check_wapp_levels: WAPP-4 power levels: 1.097 1.091 0.956 0.974 2008-Apr-26 23:23:02 INFO5 check_wapp_levels: WAPP power levels are between 0.787 and 1.123 (still bad) 2008-Apr-26 23:23:04 INFO5 check_wapp_levels: WAPP power levels are between 0.765 and 1.123 (still bad) 2008-Apr-26 23:23:06 INFO5 check_wapp_levels: WAPP power levels are between 0.691 and 1.125 (still bad) 2008-Apr-26 23:23:08 INFO5 check_wapp_levels: WAPP power levels are between 0.631 and 1.126 (still bad) 2008-Apr-26 23:23:10 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.924 and 1.125 2008-Apr-26 23:24:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.599 < 0.8)! 2008-Apr-26 23:24:05 LOG4 check_wapp_levels: WAPP-1 power levels: 0.953 0.599 0.915 1.114 2008-Apr-26 23:24:05 LOG4 check_wapp_levels: WAPP-2 power levels: 1.060 0.987 1.061 1.118 2008-Apr-26 23:24:05 LOG4 check_wapp_levels: WAPP-3 power levels: 0.982 1.017 1.083 0.936 2008-Apr-26 23:24:05 LOG4 check_wapp_levels: WAPP-4 power levels: 1.101 1.098 0.961 0.979 2008-Apr-26 23:24:07 INFO5 check_wapp_levels: WAPP power levels are between 0.567 and 1.120 (still bad) 2008-Apr-26 23:24:09 INFO5 check_wapp_levels: WAPP power levels are between 0.741 and 1.122 (still bad) 2008-Apr-26 23:24:11 INFO5 check_wapp_levels: WAPP power levels are between 0.611 and 1.124 (still bad) 2008-Apr-26 23:24:13 INFO5 check_wapp_levels: WAPP power levels are between 0.776 and 1.125 (still bad) 2008-Apr-26 23:24:15 INFO5 check_wapp_levels: WAPP power levels are between 0.745 and 1.125 (still bad) 2008-Apr-26 23:24:17 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.863 and 1.124 2008-Apr-26 23:24:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.457 < 0.8)! 2008-Apr-26 23:24:19 LOG4 check_wapp_levels: WAPP-1 power levels: 0.956 0.457 0.924 1.124 2008-Apr-26 23:24:19 LOG4 check_wapp_levels: WAPP-2 power levels: 1.061 0.990 1.063 1.120 2008-Apr-26 23:24:19 LOG4 check_wapp_levels: WAPP-3 power levels: 0.982 1.017 1.083 0.935 2008-Apr-26 23:24:19 LOG4 check_wapp_levels: WAPP-4 power levels: 1.100 1.097 0.960 0.978 2008-Apr-26 23:24:21 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.871 and 1.125 2008-Apr-26 23:24:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.708 < 0.8)! 2008-Apr-26 23:24:31 LOG4 check_wapp_levels: WAPP-1 power levels: 0.959 0.708 0.929 1.131 2008-Apr-26 23:24:31 LOG4 check_wapp_levels: WAPP-2 power levels: 1.062 0.989 1.057 1.114 2008-Apr-26 23:24:31 LOG4 check_wapp_levels: WAPP-3 power levels: 0.982 1.017 1.084 0.936 2008-Apr-26 23:24:31 LOG4 check_wapp_levels: WAPP-4 power levels: 1.102 1.096 0.961 0.978 2008-Apr-26 23:24:33 INFO5 check_wapp_levels: WAPP power levels are between 0.571 and 1.130 (still bad) 2008-Apr-26 23:24:35 INFO5 check_wapp_levels: WAPP power levels are between 0.773 and 1.130 (still bad) 2008-Apr-26 23:24:37 INFO5 check_wapp_levels: WAPP power levels are between 0.764 and 1.129 (still bad) 2008-Apr-26 23:24:39 INFO5 check_wapp_levels: WAPP power levels are between 0.761 and 1.131 (still bad) 2008-Apr-26 23:24:41 INFO5 check_wapp_levels: WAPP power levels are between 0.773 and 1.134 (still bad) 2008-Apr-26 23:24:43 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.930 and 1.139 2008-Apr-26 23:24:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.630 < 0.8)! 2008-Apr-26 23:24:51 LOG4 check_wapp_levels: WAPP-1 power levels: 0.954 0.630 0.952 1.163 2008-Apr-26 23:24:51 LOG4 check_wapp_levels: WAPP-2 power levels: 1.068 0.994 1.056 1.113 2008-Apr-26 23:24:51 LOG4 check_wapp_levels: WAPP-3 power levels: 0.981 1.017 1.084 0.935 2008-Apr-26 23:24:51 LOG4 check_wapp_levels: WAPP-4 power levels: 1.097 1.089 0.957 0.973 2008-Apr-26 23:24:53 INFO5 check_wapp_levels: WAPP power levels are between 0.408 and 1.163 (still bad) 2008-Apr-26 23:24:55 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.800 and 1.159 2008-Apr-26 23:35:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.690 < 0.8)! 2008-Apr-26 23:35:47 LOG4 check_wapp_levels: WAPP-1 power levels: 0.963 0.690 0.932 1.123 2008-Apr-26 23:35:47 LOG4 check_wapp_levels: WAPP-2 power levels: 1.063 0.991 1.057 1.113 2008-Apr-26 23:35:47 LOG4 check_wapp_levels: WAPP-3 power levels: 0.988 1.018 1.087 0.938 2008-Apr-26 23:35:47 LOG4 check_wapp_levels: WAPP-4 power levels: 1.099 1.088 0.957 0.973 2008-Apr-26 23:35:49 INFO5 check_wapp_levels: WAPP power levels are between 0.555 and 1.124 (still bad) 2008-Apr-26 23:35:51 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.820 and 1.124 2008-Apr-26 23:35:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.612 < 0.8)! 2008-Apr-26 23:35:53 LOG4 check_wapp_levels: WAPP-1 power levels: 0.959 0.612 0.928 1.122 2008-Apr-26 23:35:53 LOG4 check_wapp_levels: WAPP-2 power levels: 1.065 0.991 1.058 1.114 2008-Apr-26 23:35:53 LOG4 check_wapp_levels: WAPP-3 power levels: 0.984 1.017 1.086 0.937 2008-Apr-26 23:35:53 LOG4 check_wapp_levels: WAPP-4 power levels: 1.101 1.092 0.959 0.975 2008-Apr-26 23:35:55 INFO5 check_wapp_levels: WAPP power levels are between 0.539 and 1.123 (still bad) 2008-Apr-26 23:35:57 INFO5 check_wapp_levels: WAPP power levels are between 0.650 and 1.123 (still bad) 2008-Apr-26 23:35:59 INFO5 check_wapp_levels: WAPP power levels are between 0.692 and 1.121 (still bad) 2008-Apr-26 23:36:01 INFO5 check_wapp_levels: WAPP power levels are between 0.768 and 1.122 (still bad) 2008-Apr-26 23:36:03 INFO5 check_wapp_levels: WAPP power levels are between 0.765 and 1.122 (still bad) 2008-Apr-26 23:36:05 INFO5 check_wapp_levels: WAPP power levels are between 0.760 and 1.121 (still bad) 2008-Apr-26 23:36:07 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.908 and 1.125 2008-Apr-26 23:36:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.604 < 0.8)! 2008-Apr-26 23:36:11 LOG4 check_wapp_levels: WAPP-1 power levels: 0.960 0.604 0.926 1.122 2008-Apr-26 23:36:11 LOG4 check_wapp_levels: WAPP-2 power levels: 1.064 0.991 1.058 1.114 2008-Apr-26 23:36:11 LOG4 check_wapp_levels: WAPP-3 power levels: 0.985 1.017 1.083 0.939 2008-Apr-26 23:36:11 LOG4 check_wapp_levels: WAPP-4 power levels: 1.100 1.090 0.957 0.973 2008-Apr-26 23:36:13 INFO5 check_wapp_levels: WAPP power levels are between 0.712 and 1.122 (still bad) 2008-Apr-26 23:36:15 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.926 and 1.122 2008-Apr-26 23:36:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.754 < 0.8)! 2008-Apr-26 23:36:17 LOG4 check_wapp_levels: WAPP-1 power levels: 0.960 0.754 0.929 1.125 2008-Apr-26 23:36:17 LOG4 check_wapp_levels: WAPP-2 power levels: 1.064 0.992 1.059 1.114 2008-Apr-26 23:36:17 LOG4 check_wapp_levels: WAPP-3 power levels: 0.985 1.019 1.086 0.939 2008-Apr-26 23:36:17 LOG4 check_wapp_levels: WAPP-4 power levels: 1.100 1.090 0.958 0.974 2008-Apr-26 23:36:19 INFO5 check_wapp_levels: WAPP power levels are between 0.565 and 1.126 (still bad) 2008-Apr-26 23:36:21 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.905 and 1.124 2008-Apr-26 23:37:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.791 < 0.8)! 2008-Apr-26 23:37:42 LOG4 check_wapp_levels: WAPP-1 power levels: 0.961 0.791 0.921 1.114 2008-Apr-26 23:37:42 LOG4 check_wapp_levels: WAPP-2 power levels: 1.064 0.988 1.058 1.114 2008-Apr-26 23:37:42 LOG4 check_wapp_levels: WAPP-3 power levels: 0.981 1.016 1.085 0.939 2008-Apr-26 23:37:42 LOG4 check_wapp_levels: WAPP-4 power levels: 1.099 1.090 0.957 0.972 2008-Apr-26 23:37:44 INFO5 check_wapp_levels: WAPP power levels are between 0.651 and 1.115 (still bad) 2008-Apr-26 23:37:46 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.891 and 1.116 2008-Apr-26 23:38:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.693 < 0.8)! 2008-Apr-26 23:38:35 LOG4 check_wapp_levels: WAPP-1 power levels: 0.955 0.693 0.910 1.108 2008-Apr-26 23:38:35 LOG4 check_wapp_levels: WAPP-2 power levels: 1.062 0.987 1.061 1.115 2008-Apr-26 23:38:35 LOG4 check_wapp_levels: WAPP-3 power levels: 0.977 1.014 1.087 0.941 2008-Apr-26 23:38:35 LOG4 check_wapp_levels: WAPP-4 power levels: 1.102 1.093 0.960 0.976 2008-Apr-26 23:38:37 INFO5 check_wapp_levels: WAPP power levels are between 0.683 and 1.117 (still bad) 2008-Apr-26 23:38:39 INFO5 check_wapp_levels: WAPP power levels are between 0.773 and 1.120 (still bad) 2008-Apr-26 23:38:41 INFO5 check_wapp_levels: WAPP power levels are between 0.770 and 1.124 (still bad) 2008-Apr-26 23:38:43 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.922 and 1.126 2008-Apr-26 23:38:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.577 < 0.8)! 2008-Apr-26 23:38:53 LOG4 check_wapp_levels: WAPP-1 power levels: 0.957 0.577 0.918 1.115 2008-Apr-26 23:38:53 LOG4 check_wapp_levels: WAPP-2 power levels: 1.062 0.988 1.059 1.115 2008-Apr-26 23:38:53 LOG4 check_wapp_levels: WAPP-3 power levels: 0.977 1.011 1.085 0.937 2008-Apr-26 23:38:53 LOG4 check_wapp_levels: WAPP-4 power levels: 1.101 1.095 0.960 0.977 2008-Apr-26 23:38:55 INFO5 check_wapp_levels: WAPP power levels are between 0.578 and 1.113 (still bad) 2008-Apr-26 23:38:57 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.917 and 1.116 2008-Apr-26 23:39:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.741 < 0.8)! 2008-Apr-26 23:39:03 LOG4 check_wapp_levels: WAPP-1 power levels: 0.961 0.741 0.926 1.120 2008-Apr-26 23:39:03 LOG4 check_wapp_levels: WAPP-2 power levels: 1.063 0.988 1.062 1.117 2008-Apr-26 23:39:03 LOG4 check_wapp_levels: WAPP-3 power levels: 0.979 1.008 1.085 0.937 2008-Apr-26 23:39:03 LOG4 check_wapp_levels: WAPP-4 power levels: 1.094 1.092 0.954 0.973 2008-Apr-26 23:39:05 INFO5 check_wapp_levels: WAPP power levels are between 0.723 and 1.123 (still bad) 2008-Apr-26 23:39:07 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.926 and 1.125 2008-Apr-26 23:39:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.722 < 0.8)! 2008-Apr-26 23:39:09 LOG4 check_wapp_levels: WAPP-1 power levels: 0.962 0.722 0.927 1.125 2008-Apr-26 23:39:09 LOG4 check_wapp_levels: WAPP-2 power levels: 1.061 0.989 1.060 1.115 2008-Apr-26 23:39:09 LOG4 check_wapp_levels: WAPP-3 power levels: 0.980 1.010 1.083 0.936 2008-Apr-26 23:39:09 LOG4 check_wapp_levels: WAPP-4 power levels: 1.096 1.091 0.957 0.974 2008-Apr-26 23:39:11 INFO5 check_wapp_levels: WAPP power levels are between 0.716 and 1.124 (still bad) 2008-Apr-26 23:39:13 INFO5 check_wapp_levels: WAPP power levels are between 0.712 and 1.121 (still bad) 2008-Apr-26 23:39:15 INFO5 check_wapp_levels: WAPP power levels are between 0.708 and 1.119 (still bad) 2008-Apr-26 23:39:17 INFO5 check_wapp_levels: WAPP power levels are between 0.706 and 1.118 (still bad) 2008-Apr-26 23:39:19 INFO5 check_wapp_levels: WAPP power levels are between 0.702 and 1.116 (still bad) 2008-Apr-26 23:39:21 INFO5 check_wapp_levels: WAPP power levels are between 0.700 and 1.115 (still bad) 2008-Apr-26 23:39:23 INFO5 check_wapp_levels: WAPP power levels are between 0.698 and 1.115 (still bad) 2008-Apr-26 23:39:25 INFO5 check_wapp_levels: WAPP power levels are between 0.695 and 1.115 (still bad) 2008-Apr-26 23:39:27 INFO5 check_wapp_levels: WAPP power levels are between 0.694 and 1.113 (still bad) 2008-Apr-26 23:39:29 INFO5 check_wapp_levels: WAPP power levels are between 0.691 and 1.113 (still bad) 2008-Apr-26 23:39:31 INFO5 check_wapp_levels: WAPP power levels are between 0.690 and 1.112 (still bad) 2008-Apr-26 23:39:33 INFO5 check_wapp_levels: WAPP power levels are between 0.687 and 1.115 (still bad) 2008-Apr-26 23:39:35 INFO5 check_wapp_levels: WAPP power levels are between 0.688 and 1.120 (still bad) 2008-Apr-26 23:39:37 INFO5 check_wapp_levels: WAPP power levels are between 0.686 and 1.122 (still bad) 2008-Apr-26 23:39:39 INFO5 check_wapp_levels: WAPP power levels are between 0.686 and 1.122 (still bad) 2008-Apr-26 23:39:41 INFO5 check_wapp_levels: WAPP power levels are between 0.685 and 1.118 (still bad) 2008-Apr-26 23:39:43 INFO5 check_wapp_levels: WAPP power levels are between 0.684 and 1.113 (still bad) 2008-Apr-26 23:39:45 INFO5 check_wapp_levels: WAPP power levels are between 0.683 and 1.112 (still bad) 2008-Apr-26 23:39:48 INFO5 check_wapp_levels: WAPP power levels are between 0.683 and 1.111 (still bad) 2008-Apr-26 23:39:50 INFO5 check_wapp_levels: WAPP power levels are between 0.681 and 1.113 (still bad) 2008-Apr-26 23:39:52 INFO5 check_wapp_levels: WAPP power levels are between 0.681 and 1.116 (still bad) 2008-Apr-26 23:39:54 INFO5 check_wapp_levels: WAPP power levels are between 0.680 and 1.123 (still bad) 2008-Apr-26 23:39:56 INFO5 check_wapp_levels: WAPP power levels are between 0.680 and 1.131 (still bad) 2008-Apr-26 23:39:58 INFO5 check_wapp_levels: WAPP power levels are between 0.679 and 1.136 (still bad) 2008-Apr-26 23:40:00 INFO5 check_wapp_levels: WAPP power levels are between 0.679 and 1.140 (still bad) 2008-Apr-26 23:40:02 INFO5 check_wapp_levels: WAPP power levels are between 0.678 and 1.141 (still bad) 2008-Apr-26 23:40:04 INFO5 check_wapp_levels: WAPP power levels are between 0.676 and 1.135 (still bad) 2008-Apr-26 23:40:06 INFO5 check_wapp_levels: WAPP power levels are between 0.676 and 1.129 (still bad) 2008-Apr-26 23:40:08 INFO5 check_wapp_levels: WAPP power levels are between 0.676 and 1.122 (still bad) 2008-Apr-26 23:40:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.676 < 0.8)! 2008-Apr-26 23:40:10 LOG4 check_wapp_levels: WAPP-1 power levels: 0.953 0.676 0.913 1.115 2008-Apr-26 23:40:10 LOG4 check_wapp_levels: WAPP-2 power levels: 1.058 0.986 1.055 1.111 2008-Apr-26 23:40:10 LOG4 check_wapp_levels: WAPP-3 power levels: 0.977 1.013 1.080 0.939 2008-Apr-26 23:40:10 LOG4 check_wapp_levels: WAPP-4 power levels: 1.097 1.091 0.956 0.973 2008-Apr-26 23:40:12 INFO5 check_wapp_levels: WAPP power levels are between 0.675 and 1.112 (still bad) 2008-Apr-26 23:40:14 INFO5 check_wapp_levels: WAPP power levels are between 0.675 and 1.112 (still bad) 2008-Apr-26 23:40:16 INFO5 check_wapp_levels: WAPP power levels are between 0.673 and 1.112 (still bad) 2008-Apr-26 23:40:18 INFO5 check_wapp_levels: WAPP power levels are between 0.674 and 1.113 (still bad) 2008-Apr-26 23:40:20 INFO5 check_wapp_levels: WAPP power levels are between 0.674 and 1.113 (still bad) 2008-Apr-26 23:40:22 INFO5 check_wapp_levels: WAPP power levels are between 0.674 and 1.114 (still bad) 2008-Apr-26 23:40:24 INFO5 check_wapp_levels: WAPP power levels are between 0.672 and 1.112 (still bad) 2008-Apr-26 23:40:26 INFO5 check_wapp_levels: WAPP power levels are between 0.673 and 1.114 (still bad) 2008-Apr-26 23:40:28 INFO5 check_wapp_levels: WAPP power levels are between 0.672 and 1.113 (still bad) 2008-Apr-26 23:40:30 INFO5 check_wapp_levels: WAPP power levels are between 0.673 and 1.113 (still bad) 2008-Apr-26 23:40:32 INFO5 check_wapp_levels: WAPP power levels are between 0.673 and 1.113 (still bad) 2008-Apr-26 23:40:34 INFO5 check_wapp_levels: WAPP power levels are between 0.673 and 1.113 (still bad) 2008-Apr-26 23:40:36 INFO5 check_wapp_levels: WAPP power levels are between 0.671 and 1.113 (still bad) 2008-Apr-26 23:40:38 INFO5 check_wapp_levels: WAPP power levels are between 0.671 and 1.113 (still bad) 2008-Apr-26 23:40:40 INFO5 check_wapp_levels: WAPP power levels are between 0.671 and 1.113 (still bad) 2008-Apr-26 23:40:42 INFO5 check_wapp_levels: WAPP power levels are between 0.671 and 1.114 (still bad) 2008-Apr-26 23:40:44 INFO5 check_wapp_levels: WAPP power levels are between 0.669 and 1.114 (still bad) 2008-Apr-26 23:40:46 INFO5 check_wapp_levels: WAPP power levels are between 0.669 and 1.114 (still bad) 2008-Apr-26 23:40:48 INFO5 check_wapp_levels: WAPP power levels are between 0.668 and 1.113 (still bad) 2008-Apr-26 23:40:50 INFO5 check_wapp_levels: WAPP power levels are between 0.669 and 1.115 (still bad) 2008-Apr-26 23:40:52 INFO5 check_wapp_levels: WAPP power levels are between 0.668 and 1.114 (still bad) 2008-Apr-26 23:40:54 INFO5 check_wapp_levels: WAPP power levels are between 0.668 and 1.115 (still bad) 2008-Apr-26 23:40:56 INFO5 check_wapp_levels: WAPP power levels are between 0.669 and 1.113 (still bad) 2008-Apr-26 23:40:58 INFO5 check_wapp_levels: WAPP power levels are between 0.668 and 1.113 (still bad) 2008-Apr-26 23:41:00 INFO5 check_wapp_levels: WAPP power levels are between 0.667 and 1.112 (still bad) 2008-Apr-26 23:41:02 INFO5 check_wapp_levels: WAPP power levels are between 0.668 and 1.112 (still bad) 2008-Apr-26 23:41:04 INFO5 check_wapp_levels: WAPP power levels are between 0.667 and 1.112 (still bad) 2008-Apr-26 23:41:06 INFO5 check_wapp_levels: WAPP power levels are between 0.668 and 1.113 (still bad) 2008-Apr-26 23:41:08 INFO5 check_wapp_levels: WAPP power levels are between 0.668 and 1.112 (still bad) 2008-Apr-26 23:41:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.667 < 0.8)! 2008-Apr-26 23:41:11 LOG4 check_wapp_levels: WAPP-1 power levels: 0.953 0.667 0.905 1.095 2008-Apr-26 23:41:11 LOG4 check_wapp_levels: WAPP-2 power levels: 1.066 0.991 1.056 1.112 2008-Apr-26 23:41:11 LOG4 check_wapp_levels: WAPP-3 power levels: 0.983 1.015 1.083 0.939 2008-Apr-26 23:41:11 LOG4 check_wapp_levels: WAPP-4 power levels: 1.099 1.090 0.957 0.972 2008-Apr-26 23:41:13 INFO5 check_wapp_levels: WAPP power levels are between 0.667 and 1.113 (still bad) 2008-Apr-26 23:41:15 INFO5 check_wapp_levels: WAPP power levels are between 0.667 and 1.112 (still bad) 2008-Apr-26 23:41:17 INFO5 check_wapp_levels: WAPP power levels are between 0.666 and 1.112 (still bad) 2008-Apr-26 23:41:19 INFO5 check_wapp_levels: WAPP power levels are between 0.666 and 1.113 (still bad) 2008-Apr-26 23:41:21 INFO5 check_wapp_levels: WAPP power levels are between 0.665 and 1.113 (still bad) 2008-Apr-26 23:41:23 INFO5 check_wapp_levels: WAPP power levels are between 0.666 and 1.113 (still bad) 2008-Apr-26 23:41:25 INFO5 check_wapp_levels: WAPP power levels are between 0.665 and 1.112 (still bad) 2008-Apr-26 23:41:27 INFO5 check_wapp_levels: WAPP power levels are between 0.665 and 1.112 (still bad) 2008-Apr-26 23:41:29 INFO5 check_wapp_levels: WAPP power levels are between 0.666 and 1.114 (still bad) 2008-Apr-26 23:41:31 INFO5 check_wapp_levels: WAPP power levels are between 0.665 and 1.113 (still bad) 2008-Apr-26 23:41:32 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-26 23:41:32 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-26 23:41:32 LOG5 end_task: Level: (4) ID = <10514> Status = 0 0 0 0 ok 2008-Apr-26 23:41:32 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-26 23:41:32 LOG5 end_task: Level: (3) ID = <10513> Status = 0 0 0 0 ok 2008-Apr-26 23:41:32 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-26 23:41:32 LOG5 finish_task: Level: (2) ID = <10481> Status = 0 0 0 0 ok 2008-Apr-26 23:41:32 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-26 23:41:32 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-26 23:41:32 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-26 23:41:32 LOG5 end_task: Level: (2) ID = <10481> Status = 0 0 0 0 ok 2008-Apr-26 23:41:32 NOTE run_command_file: DONE with command file processing 2008-Apr-26 23:41:32 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2008-Apr-26 23:41:32 STOP finish_task: Finishing task 'running command file '080426_obs.cmd'' 2008-Apr-26 23:41:32 LOG5 finish_task: Level: (1) ID = <10090> Status = 0 0 0 0 ok 2008-Apr-26 23:41:32 DONE finish_task: DONE finished running: command file '080426_obs.cmd' 2008-Apr-26 23:41:32 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-26 23:41:32 END end_task: Finishing task 'running command file '080426_obs.cmd'' with status 'OK' 2008-Apr-26 23:41:32 LOG5 end_task: Level: (1) ID = <10090> Status = 0 0 0 0 ok 2008-Apr-26 23:41:33 INFO5 check_wapp_levels: WAPP power levels are between 0.665 and 1.112 (still bad) 2008-Apr-26 23:43:35 ALERT CIMA-exit_cima: Exiting CIMA ... 2008-Apr-26 23:43:35 COMMAND CIMA-send_to_exec: Sending command to move interim correlator data 2008-Apr-26 23:43:35 LOG4 exec_msg: From OBSERVER: vw_send {mvdata a2048} 2008-Apr-26 23:43:35 LOG3 vw_send: To DATATAKING: mvdata a2048 2008-Apr-26 23:43:35 COMMAND CIMA-send_to_exec: Sending command to clear telescope offsets 2008-Apr-26 23:43:35 LOG4 exec_msg: From OBSERVER: vw_send {pnt c setoff 0 0} 2008-Apr-26 23:43:35 LOG3 vw_send: To DATATAKING: pnt c setoff 0 0 2008-Apr-26 23:43:36 NOTE CIMA-exit_cima: Cleaning up session ... 2008-Apr-26 23:43:36 LOG4 got_cormsg: From DATATAKING: mvdata a2048 2008-Apr-26 23:43:36 LOG4 got_cormsg: From DATATAKING: pnt c setoff 0 0 2008-Apr-26 23:43:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 23:43:36 LOG4 got_cormsg: From DATATAKING: vw%