2008-Apr-25 18:46:26 BEGIN executive: CIMA executive starting ... 2008-Apr-25 18:46:26 NOTE executive: STARTING NEW CIMA SESSION 2008-Apr-25 18:46:27 INFO1 executive: Using CIMA version 2.3.xx 'unusable' from 2008-04-17 17:13 2008-Apr-25 18:46:27 INFO4 executive: This is an ON-LINE session 2008-Apr-25 18:46:27 INFO4 executive: This is a REMOTE session 2008-Apr-25 18:46:27 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2008-Apr-25 18:46:27 INFO1 executive: CIMA session for project 'a2048' in 'line' mode for 'EM, RM' 2008-Apr-25 18:46:27 INFO2 executive: Logging to '/share/obs4/usr/a2048/a2048.cimalog_20080425' 2008-Apr-25 18:46:27 LOG2 log_preferences: Currently applied preferences: 2008-Apr-25 18:46:27 LOG2 log_preferences: prefs(dailylog) = daily 2008-Apr-25 18:46:27 LOG2 log_preferences: prefs(offlinelog) = skip 2008-Apr-25 18:46:27 LOG2 log_preferences: prefs(datawindow) = ignore 2008-Apr-25 18:46:27 LOG2 log_preferences: prefs(limitwarning) = enabled 2008-Apr-25 18:46:27 LOG2 log_preferences: prefs(wappfailure) = abort 2008-Apr-25 18:46:27 LOG2 log_preferences: prefs(helpstyle) = stay-open 2008-Apr-25 18:46:27 LOG2 log_preferences: prefs(logcolours) = full 2008-Apr-25 18:46:27 LOG2 log_preferences: prefs(displaylevel) = INFO3 2008-Apr-25 18:46:27 LOG2 log_preferences: prefs(loglevel) = LOG5 2008-Apr-25 18:46:27 LOG2 log_preferences: prefs(displayformat) = short 2008-Apr-25 18:46:27 LOG2 log_preferences: prefs(logformat) = new 2008-Apr-25 18:46:27 LOG2 log_preferences: prefs(fontsize) = 4 2008-Apr-25 18:46:27 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2008-Apr-25 18:46:27 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2048 2008-Apr-25 18:46:27 ALERT executive: CIMA executive ready 2008-Apr-25 18:46:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:46:30 LOG4 got_cormsg: From DATATAKING: setup 2008-Apr-25 18:46:31 NOTE frontend: CIMA frontend ready 2008-Apr-25 18:46:36 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0xd 2008-Apr-25 18:46:36 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0xd' 2008-Apr-25 18:46:36 LOG4 got_cormsg: From DATATAKING: vw% io 2008-Apr-25 18:46:36 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2008-Apr-25 18:46:36 LOG4 got_cormsg: From DATATAKING: 2008-Apr-25 18:46:36 LOG4 got_cormsg: From DATATAKING: vw% tape stat 2008-Apr-25 18:46:36 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2008-Apr-25 18:46:36 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2008-Apr-25 18:46:36 LOG4 got_cormsg: From DATATAKING: vw% connectall 2008-Apr-25 18:46:36 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2008-Apr-25 18:46:36 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2008-Apr-25 18:46:36 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2008-Apr-25 18:46:36 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2008-Apr-25 18:46:36 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2008-Apr-25 18:46:36 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2008-Apr-25 18:46:36 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2008-Apr-25 18:46:36 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2008-Apr-25 18:46:36 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2048 2008-Apr-25 18:46:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:46:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:46:39 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2008-Apr-25 18:46:39 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2008-Apr-25 18:46:39 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2008-Apr-25 18:46:39 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2008-Apr-25 18:46:39 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Apr-25 18:46:39 NOTE select_receiver: Starting to select receiver ALFA 2008-Apr-25 18:46:39 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Apr-25 18:46:39 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Apr-25 18:46:39 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Apr-25 18:46:39 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Apr-25 18:46:39 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Apr-25 18:46:39 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Apr-25 18:46:39 DONE finish_task: DONE finished selecting: receiver ALFA 2008-Apr-25 18:46:39 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-25 18:46:39 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Apr-25 18:46:39 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Apr-25 18:46:39 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Apr-25 18:46:39 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Apr-25 18:46:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:46:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:46:54 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2008-Apr-25 18:46:54 LOG4 exec_msg: From OBSERVER: restart_wapp 2008-Apr-25 18:46:54 LOG5 restart_wapp: Calling 'restart_wapp' 2008-Apr-25 18:46:54 BEGIN begin_task: Starting task 'restarting the WAPPs' 2008-Apr-25 18:46:54 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Apr-25 18:46:54 NOTE restart_wapp: Restarting all WAPPs 2008-Apr-25 18:46:54 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2008-Apr-25 18:46:54 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2008-Apr-25 18:46:54 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Apr-25 18:46:54 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Apr-25 18:46:57 ALERT WAPP=3-wappcon: WAPP3 restarting 2008-Apr-25 18:46:58 ALERT WAPP=2-wappcon: WAPP2 restarting 2008-Apr-25 18:46:58 ALERT WAPP=4-wappcon: WAPP4 restarting 2008-Apr-25 18:46:58 ALERT WAPP=1-wappcon: WAPP1 restarting 2008-Apr-25 18:48:19 INFO1 CIMA-run_command_file: Transferring command file 'command_galfasrc.cmd ' to executive ... 2008-Apr-25 18:48:19 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 5 {LOAD togs_ages.conf} 2008-Apr-25 18:48:19 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 6 {CATALOG togs_ages.cat} 2008-Apr-25 18:48:19 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {GOTO galfasrc} 2008-Apr-25 18:48:19 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {ALFAANGLE 19} 2008-Apr-25 18:48:19 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {WAITTRACK} 2008-Apr-25 18:48:19 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 13 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2008-Apr-25 18:48:19 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-Apr-25 18:48:19 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc.cmd 1 1 6 2008-Apr-25 18:48:19 LOG4 run_command_file: Calling 'run_command_file command_galfasrc.cmd 1 1 6' 2008-Apr-25 18:48:19 BEGIN begin_task: Starting task 'running command file 'command_galfasrc.cmd'' 2008-Apr-25 18:48:19 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Apr-25 18:48:19 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc.cmd' ...} 2008-Apr-25 18:48:19 NOTE run_command_file: Starting execution of command file 'command_galfasrc.cmd' from line 1 2008-Apr-25 18:48:19 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_ages.conf' 2008-Apr-25 18:48:19 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2008-Apr-25 18:48:19 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-25 18:48:19 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2008-Apr-25 18:48:19 NOTE CIMA-load_config_file: Loading configuration file 'togs_ages.conf' 2008-Apr-25 18:48:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Apr-25 18:48:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Apr-25 18:48:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Apr-25 18:48:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Apr-25 18:48:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Apr-25 18:48:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2008-Apr-25 18:48:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Apr-25 18:48:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1381.2" 2008-Apr-25 18:48:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1381.2" 2008-Apr-25 18:48:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1381.2" 2008-Apr-25 18:48:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1381.2" 2008-Apr-25 18:48:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1381.2" 2008-Apr-25 18:48:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1381.2" 2008-Apr-25 18:48:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1381.2" 2008-Apr-25 18:48:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1381.2" 2008-Apr-25 18:48:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1381.2" 2008-Apr-25 18:48:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Apr-25 18:48:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Apr-25 18:48:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Apr-25 18:48:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Apr-25 18:48:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Apr-25 18:48:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Apr-25 18:48:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Apr-25 18:48:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Apr-25 18:48:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Apr-25 18:48:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Apr-25 18:48:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Apr-25 18:48:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Apr-25 18:48:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Apr-25 18:48:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2008-Apr-25 18:48:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Apr-25 18:48:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Apr-25 18:48:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Apr-25 18:48:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Apr-25 18:48:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Apr-25 18:48:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Apr-25 18:48:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Apr-25 18:48:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Apr-25 18:48:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Apr-25 18:48:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1631.200000" 2008-Apr-25 18:48:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Apr-25 18:48:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Apr-25 18:48:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Apr-25 18:48:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Apr-25 18:48:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Apr-25 18:48:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Apr-25 18:48:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Apr-25 18:48:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Apr-25 18:48:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Apr-25 18:48:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Apr-25 18:48:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Apr-25 18:48:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Apr-25 18:48:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Apr-25 18:48:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Apr-25 18:48:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Apr-25 18:48:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Apr-25 18:48:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Apr-25 18:48:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Apr-25 18:48:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Apr-25 18:48:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Apr-25 18:48:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Apr-25 18:48:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Apr-25 18:48:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Apr-25 18:48:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Apr-25 18:48:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Apr-25 18:48:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Apr-25 18:48:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Apr-25 18:48:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Apr-25 18:48:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Apr-25 18:48:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Apr-25 18:48:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Apr-25 18:48:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Apr-25 18:48:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Apr-25 18:48:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Apr-25 18:48:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Apr-25 18:48:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Apr-25 18:48:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Apr-25 18:48:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Apr-25 18:48:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Apr-25 18:48:21 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-25 18:48:21 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Apr-25 18:48:21 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Apr-25 18:48:21 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Apr-25 18:48:21 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Apr-25 18:48:21 INFO1 config_iflo: Selecting receiver ALFA 2008-Apr-25 18:48:22 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2008-Apr-25 18:48:22 LOG1 select_receiver: Calling 'select_receiver alfa no no no' 2008-Apr-25 18:48:22 START begin_task: Starting task 'selecting receiver ALFA' 2008-Apr-25 18:48:22 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Apr-25 18:48:22 NOTE select_receiver: Starting to select receiver ALFA 2008-Apr-25 18:48:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Apr-25 18:48:22 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Apr-25 18:48:22 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Apr-25 18:48:22 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Apr-25 18:48:22 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Apr-25 18:48:22 LOG5 finish_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Apr-25 18:48:22 INFO2 finish_task: DONE finished selecting: receiver ALFA 2008-Apr-25 18:48:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 18:48:22 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Apr-25 18:48:22 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Apr-25 18:48:22 START begin_task: Starting task 'waiting for receiver ALFA' 2008-Apr-25 18:48:22 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2008-Apr-25 18:48:22 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2008-Apr-25 18:48:22 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2008-Apr-25 18:48:22 INFO1 config_iflo: Configuring rest of the IF/LO path 2008-Apr-25 18:48:22 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2008-Apr-25 18:48:22 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 18:48:22 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-25 18:48:22 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 18:48:22 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2008-Apr-25 18:48:22 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 18:48:22 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 18:48:22 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2008-Apr-25 18:48:22 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 18:48:22 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-25 18:48:22 LOG3 vw_send: To DATATAKING: alfafb 1 2008-Apr-25 18:48:22 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2008-Apr-25 18:48:22 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Apr-25 18:48:22 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Apr-25 18:48:22 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2008-Apr-25 18:48:22 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2008-Apr-25 18:48:22 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2008-Apr-25 18:48:22 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2008-Apr-25 18:48:22 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2008-Apr-25 18:48:22 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2008-Apr-25 18:48:22 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Apr-25 18:48:22 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Apr-25 18:48:22 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Apr-25 18:48:22 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Apr-25 18:48:22 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Apr-25 18:48:22 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2008-Apr-25 18:48:22 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2008-Apr-25 18:48:22 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2008-Apr-25 18:48:22 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2008-Apr-25 18:48:22 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Apr-25 18:48:22 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2008-Apr-25 18:48:22 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Apr-25 18:48:22 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Apr-25 18:48:22 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 18:48:22 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Apr-25 18:48:22 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2008-Apr-25 18:48:22 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Apr-25 18:48:22 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2008-Apr-25 18:48:22 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2008-Apr-25 18:48:22 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Apr-25 18:48:22 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 18:48:22 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Apr-25 18:48:22 LOG5 begin_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2008-Apr-25 18:48:22 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Apr-25 18:48:22 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Apr-25 18:48:22 LOG4 got_cormsg: From DATATAKING: alfafb 1 2008-Apr-25 18:48:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2008-Apr-25 18:48:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2008-Apr-25 18:48:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2008-Apr-25 18:48:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2008-Apr-25 18:48:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2008-Apr-25 18:48:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2008-Apr-25 18:48:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2008-Apr-25 18:48:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2008-Apr-25 18:48:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2008-Apr-25 18:48:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2008-Apr-25 18:48:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2008-Apr-25 18:48:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Apr-25 18:48:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2008-Apr-25 18:48:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Apr-25 18:48:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 18:48:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Apr-25 18:48:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2008-Apr-25 18:48:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2008-Apr-25 18:48:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2008-Apr-25 18:48:22 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 18:48:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:48:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:48:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:48:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:48:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:48:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:48:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:48:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:48:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:48:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:48:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:48:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:48:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:48:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:48:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:48:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:48:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:48:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:48:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:48:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:48:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:48:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:48:38 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-25 18:48:38 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Apr-25 18:48:38 LOG5 end_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2008-Apr-25 18:48:38 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Apr-25 18:48:38 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Apr-25 18:48:38 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Apr-25 18:48:38 DONE finish_task: DONE finished configuration: IF/LO path 2008-Apr-25 18:48:38 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-25 18:48:38 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Apr-25 18:48:38 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Apr-25 18:48:38 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Apr-25 18:48:38 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Apr-25 18:48:39 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Apr-25 18:48:39 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Apr-25 18:48:39 START begin_task: Starting task 'selecting calibration port' 2008-Apr-25 18:48:39 LOG5 begin_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-Apr-25 18:48:39 LOG3 vw_send: To DATATAKING: calport 3 2008-Apr-25 18:48:39 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Apr-25 18:48:39 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 18:48:39 START begin_task: Starting task 'waiting on calport' 2008-Apr-25 18:48:39 LOG5 begin_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2008-Apr-25 18:48:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:48:39 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Apr-25 18:48:39 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 18:48:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:48:39 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-25 18:48:39 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Apr-25 18:48:39 LOG5 end_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2008-Apr-25 18:48:39 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Apr-25 18:48:39 STOP finish_task: Finishing task 'selecting calibration port' 2008-Apr-25 18:48:39 LOG5 finish_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-Apr-25 18:48:39 INFO2 finish_task: DONE finished configuring: calibration port 2008-Apr-25 18:48:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 18:48:39 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Apr-25 18:48:39 LOG5 end_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-Apr-25 18:48:39 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Apr-25 18:48:39 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Apr-25 18:48:39 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Apr-25 18:48:39 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Apr-25 18:48:39 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Apr-25 18:48:39 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Apr-25 18:48:39 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Apr-25 18:48:39 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Apr-25 18:48:39 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 EM, RM 2008-Apr-25 18:48:39 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 EM, RM 2008-Apr-25 18:48:39 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 EM, RM 2008-Apr-25 18:48:39 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 EM, RM 2008-Apr-25 18:48:39 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Apr-25 18:48:39 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Apr-25 18:48:39 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-25 18:48:39 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2008-Apr-25 18:48:39 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-25 18:48:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:48:39 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-25 18:48:39 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-25 18:48:39 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-25 18:48:39 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2008-Apr-25 18:48:39 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 EM, RM 2008-Apr-25 18:48:39 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 EM, RM 2008-Apr-25 18:48:39 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 EM, RM 2008-Apr-25 18:48:39 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 EM, RM 2008-Apr-25 18:48:39 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Apr-25 18:48:39 LOG5 finish_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Apr-25 18:48:39 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Apr-25 18:48:39 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-25 18:48:40 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Apr-25 18:48:40 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Apr-25 18:48:40 COMMAND run_command_line: EXECUTING command 6: 'CATALOG togs_ages.cat' 2008-Apr-25 18:48:40 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/togs_ages.cat' 2008-Apr-25 18:48:40 COMMAND run_command_line: EXECUTING command 7: 'GOTO galfasrc' 2008-Apr-25 18:48:40 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2048/togs_ages.cat galfasrc nooffset nowait' 2008-Apr-25 18:48:40 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2008-Apr-25 18:48:40 LOG5 begin_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2008-Apr-25 18:48:40 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2008-Apr-25 18:48:40 LOG3 track_source: Calling 'track_source galfasrc 094300.0 +215300 J 0.0 0.0 main small /share/obs4/usr/a2048/togs_ages.cat 0 Topocentric velocity(optical)' 2008-Apr-25 18:48:40 START begin_task: Starting task 'sending tracking commands' 2008-Apr-25 18:48:40 LOG5 begin_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2008-Apr-25 18:48:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2008-Apr-25 18:48:40 INFO1 track_source: Starting to track galfasrc 2008-Apr-25 18:48:40 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2008-Apr-25 18:48:40 LOG3 vw_send: To DATATAKING: set ra 094300.0 2008-Apr-25 18:48:40 LOG3 vw_send: To DATATAKING: set dec +215300 2008-Apr-25 18:48:40 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-25 18:48:40 LOG3 vw_send: To DATATAKING: pnt tr 094300.0 +215300 -CJ 2008-Apr-25 18:48:40 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Apr-25 18:48:40 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-25 18:48:40 LOG5 finish_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2008-Apr-25 18:48:40 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-25 18:48:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 18:48:40 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-25 18:48:40 LOG5 end_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2008-Apr-25 18:48:40 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2008-Apr-25 18:48:40 LOG5 finish_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2008-Apr-25 18:48:40 DONE finish_task: DONE finished tracking: source 'galfasrc' 2008-Apr-25 18:48:40 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-25 18:48:40 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2008-Apr-25 18:48:40 LOG5 end_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2008-Apr-25 18:48:40 COMMAND run_command_line: EXECUTING command 8: 'ALFAANGLE 19' 2008-Apr-25 18:48:40 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2008-Apr-25 18:48:40 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Apr-25 18:48:40 LOG5 begin_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2008-Apr-25 18:48:40 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Apr-25 18:48:40 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Apr-25 18:48:40 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-Apr-25 18:48:40 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-25 18:48:40 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-25 18:48:40 LOG5 begin_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2008-Apr-25 18:48:40 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 EM, RM' 2008-Apr-25 18:48:40 NOTE WAPPDATA-new_file: New FITS file: wapp.20080425.a2048.0000.fits 2008-Apr-25 18:48:40 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2008-Apr-25 18:48:40 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Apr-25 18:48:40 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Apr-25 18:48:40 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20080425.a2048.0000.fits} 2008-Apr-25 18:48:40 LOG4 got_cormsg: From DATATAKING: set ra 094300.0 2008-Apr-25 18:48:40 LOG4 got_cormsg: From DATATAKING: set dec +215300 2008-Apr-25 18:48:40 LOG4 got_cormsg: From DATATAKING: vw% 094300.0 2008-Apr-25 18:48:40 LOG4 got_cormsg: From DATATAKING: vw% +215300 2008-Apr-25 18:48:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:48:40 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-25 18:48:40 LOG4 got_cormsg: From DATATAKING: pnt tr 094300.0 +215300 -CJ 2008-Apr-25 18:48:40 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Apr-25 18:48:40 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-25 18:48:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:48:41 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 EM, RM' 2008-Apr-25 18:48:48 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-25 18:48:48 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Apr-25 18:48:48 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-25 18:48:48 LOG5 end_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2008-Apr-25 18:48:48 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-25 18:48:48 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Apr-25 18:48:48 LOG5 finish_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2008-Apr-25 18:48:48 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Apr-25 18:48:48 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-25 18:48:48 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Apr-25 18:48:48 LOG5 end_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2008-Apr-25 18:48:48 COMMAND run_command_line: EXECUTING command 9: 'WAITTRACK' 2008-Apr-25 18:48:48 BEGIN begin_task: Starting task 'waiting on telescope' 2008-Apr-25 18:48:48 LOG5 begin_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2008-Apr-25 18:48:48 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-25 18:48:48 LOG3 waittrk: Start waittrk 5 2008-Apr-25 18:48:48 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-25 18:48:48 LOG5 begin_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2008-Apr-25 18:48:53 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-25 18:48:53 LOG5 end_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2008-Apr-25 18:48:53 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-25 18:48:53 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2008-Apr-25 18:52:33 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-25 18:52:33 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2008-Apr-25 18:52:33 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-25 18:52:33 INFO2 waittrk: Now tracking galfasrc 2008-Apr-25 18:52:33 LOG4 waittrk: Current telescope position: Az = 253.25 ZA = 14.67 2008-Apr-25 18:52:33 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-25 18:52:33 LOG5 finish_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2008-Apr-25 18:52:33 DONE finish_task: DONE finished waiting: telescope on source 2008-Apr-25 18:52:33 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-25 18:52:33 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-25 18:52:33 LOG5 end_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2008-Apr-25 18:52:33 COMMAND run_command_line: EXECUTING command 13: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2008-Apr-25 18:52:33 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2008-Apr-25 18:52:36 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-25 18:52:36 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first 0 {1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2008-Apr-25 18:52:36 BEGIN begin_task: Starting task 'smart frequency switching' 2008-Apr-25 18:52:36 LOG5 begin_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2008-Apr-25 18:52:36 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'galfasrc' 2008-Apr-25 18:52:36 INFO1 smartfreq: Starting pattern: Smart frequency switching 2008-Apr-25 18:52:36 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2008-Apr-25 18:52:36 START begin_task: Starting task 'selecting calibration type' 2008-Apr-25 18:52:36 LOG5 begin_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2008-Apr-25 18:52:36 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-25 18:52:36 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-25 18:52:36 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 18:52:36 START begin_task: Starting task 'waiting on setcal' 2008-Apr-25 18:52:36 LOG5 begin_task: Level: (4) ID = <10022> Status = 0 0 0 0 ok 2008-Apr-25 18:52:36 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-25 18:52:36 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 18:52:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:52:36 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-25 18:52:36 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-25 18:52:36 LOG5 end_task: Level: (4) ID = <10022> Status = 0 0 0 0 ok 2008-Apr-25 18:52:36 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-25 18:52:36 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 18:52:36 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-25 18:52:36 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 18:52:36 LOG5 begin_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2008-Apr-25 18:52:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:52:36 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 18:52:36 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 18:52:36 LOG5 end_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2008-Apr-25 18:52:36 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 18:52:36 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-25 18:52:36 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 18:52:36 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-25 18:52:36 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 18:52:36 LOG5 begin_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2008-Apr-25 18:52:36 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 18:52:36 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 18:52:36 LOG5 end_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2008-Apr-25 18:52:36 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 18:52:36 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-25 18:52:36 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-25 18:52:36 LOG5 finish_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2008-Apr-25 18:52:36 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-25 18:52:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 18:52:36 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-25 18:52:36 LOG5 end_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2008-Apr-25 18:52:36 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 EM, RM 2008-Apr-25 18:52:36 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 EM, RM 2008-Apr-25 18:52:36 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 EM, RM 2008-Apr-25 18:52:36 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 EM, RM 2008-Apr-25 18:52:36 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20080425.a2048.0000.fits' is empty! 2008-Apr-25 18:52:36 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2008-Apr-25 18:52:36 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-25 18:52:37 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2008-Apr-25 18:52:37 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-25 18:52:37 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-25 18:52:37 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-25 18:52:37 LOG5 begin_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2008-Apr-25 18:52:37 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-25 18:52:37 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-25 18:52:37 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-25 18:52:37 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-25 18:52:37 LOG5 end_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2008-Apr-25 18:52:37 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2008-Apr-25 18:52:37 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-25 18:52:37 LOG5 begin_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-Apr-25 18:52:37 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-25 18:52:37 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-25 18:52:37 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-25 18:52:37 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-25 18:52:37 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 18:52:37 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-25 18:52:37 LOG5 begin_task: Level: (4) ID = <10027> Status = 0 0 0 0 ok 2008-Apr-25 18:52:37 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-25 18:52:37 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 18:52:37 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 EM, RM' 2008-Apr-25 18:52:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:52:40 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-25 18:52:40 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-25 18:52:40 LOG5 end_task: Level: (4) ID = <10027> Status = 0 0 0 0 ok 2008-Apr-25 18:52:40 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-25 18:52:40 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-25 18:52:40 LOG5 begin_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2008-Apr-25 18:52:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-25 18:52:40 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-25 18:52:40 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-25 18:52:40 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-25 18:52:40 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-25 18:52:40 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-25 18:52:40 LOG5 begin_task: Level: (5) ID = <10029> Status = 0 0 0 0 ok 2008-Apr-25 18:52:40 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-25 18:52:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:52:41 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 1 dB --- beam 1: 8 6 dB 2008-Apr-25 18:52:41 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-25 18:52:41 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 6 dB 2008-Apr-25 18:52:41 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 3 3 dB 2008-Apr-25 18:52:41 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-25 18:52:41 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-25 18:52:41 LOG5 end_task: Level: (5) ID = <10029> Status = 0 0 0 0 ok 2008-Apr-25 18:52:41 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.887 0.917 ALFA beam 1: 0.901 1.106 2008-Apr-25 18:52:41 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.049 0.976 ALFA beam 3: 0.998 1.048 2008-Apr-25 18:52:41 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.930 0.965 ALFA beam 5: 1.027 0.904 2008-Apr-25 18:52:41 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.999 1.010 ALFA beam 7: 0.880 0.899 2008-Apr-25 18:52:41 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-25 18:52:41 LOG5 finish_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2008-Apr-25 18:52:41 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-25 18:52:41 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 18:52:41 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-25 18:52:41 LOG5 end_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2008-Apr-25 18:52:41 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-25 18:52:41 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-25 18:52:41 LOG5 finish_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-Apr-25 18:52:41 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-25 18:52:41 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 18:52:41 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-25 18:52:41 LOG5 end_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-Apr-25 18:52:41 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2008-Apr-25 18:52:41 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2008-Apr-25 18:52:41 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2008-Apr-25 18:52:41 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-25 18:52:41 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.31974 J 2008-Apr-25 18:52:41 LOG2 antvel: Computed apparent RA = 09:43:29.3 Dec = +21:50:44.2 2008-Apr-25 18:52:41 LOG2 antvel: Parameters to Doppler: Topocentric 82360 2008 116 0.0 2008-Apr-25 18:52:41 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-25 18:52:41 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2008-Apr-25 18:52:41 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2008-Apr-25 18:52:41 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-25 18:52:41 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-25 18:52:41 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Apr-25 18:52:41 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 18:52:41 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-25 18:52:41 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-25 18:52:41 LOG5 begin_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2008-Apr-25 18:52:41 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-25 18:52:41 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.715369 2008.319744213755 18.999933 2008-Apr-25 18:52:41 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666670 21.883333333333329 2008-Apr-25 18:52:41 LOG4 log_alfabeam: ALFABEAM 1 9.709527006149447 21.846087082408211 2008-Apr-25 18:52:41 LOG4 log_alfabeam: ALFABEAM 2 9.715397949351342 21.791976983256369 2008-Apr-25 18:52:41 LOG4 log_alfabeam: ALFABEAM 3 9.722547568982133 21.828787542542386 2008-Apr-25 18:52:41 LOG4 log_alfabeam: ALFABEAM 4 9.723805242331425 21.920746055832666 2008-Apr-25 18:52:41 LOG4 log_alfabeam: ALFABEAM 5 9.717896213433391 21.974984945964199 2008-Apr-25 18:52:41 LOG4 log_alfabeam: ALFABEAM 6 9.710767815576999 21.937137139749524 2008-Apr-25 18:52:41 INFO2 take_spectra: Starting WAPP+GALFA scan: 811600074 2008-Apr-25 18:52:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-25 18:52:42 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-25 18:52:42 LOG5 begin_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2008-Apr-25 18:52:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 18:52:42 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Apr-25 18:52:42 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 18:52:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:52:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:52:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82363.00 2008-Apr-25 18:52:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 18:52:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:52:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:52:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 18:52:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:52:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:52:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:52:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:52:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:52:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Apr-25 18:52:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Apr-25 18:52:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Apr-25 18:52:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Apr-25 18:52:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Apr-25 18:52:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Apr-25 18:52:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Apr-25 18:52:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Apr-25 18:52:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Apr-25 18:52:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 18:52:53 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-25 18:52:53 LOG5 end_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2008-Apr-25 18:52:53 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-25 18:52:53 LOG5 end_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2008-Apr-25 18:52:53 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2008-Apr-25 18:52:53 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2008-Apr-25 18:52:53 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2008-Apr-25 18:52:53 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-25 18:52:53 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.31974 J 2008-Apr-25 18:52:53 LOG2 antvel: Computed apparent RA = 09:43:29.3 Dec = +21:50:44.2 2008-Apr-25 18:52:53 LOG2 antvel: Parameters to Doppler: Topocentric 82373 2008 116 0.0 2008-Apr-25 18:52:53 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-25 18:52:53 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2008-Apr-25 18:52:53 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2008-Apr-25 18:52:53 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-25 18:52:53 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-25 18:52:53 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Apr-25 18:52:53 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 18:52:53 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-25 18:52:53 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-25 18:52:53 LOG5 begin_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2008-Apr-25 18:52:53 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-25 18:52:53 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.718990 2008.3197446257002 18.999933 2008-Apr-25 18:52:53 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666665 21.883333333333347 2008-Apr-25 18:52:53 LOG4 log_alfabeam: ALFABEAM 1 9.709529691662645 21.845987666074329 2008-Apr-25 18:52:53 LOG4 log_alfabeam: ALFABEAM 2 9.715404468536804 21.791959815553184 2008-Apr-25 18:52:53 LOG4 log_alfabeam: ALFABEAM 3 9.722551479444071 21.828868587373620 2008-Apr-25 18:52:53 LOG4 log_alfabeam: ALFABEAM 4 9.723802531232876 21.920846292133010 2008-Apr-25 18:52:53 LOG4 log_alfabeam: ALFABEAM 5 9.717889520030946 21.975002617689455 2008-Apr-25 18:52:53 LOG4 log_alfabeam: ALFABEAM 6 9.710763911537928 21.937053380617783 2008-Apr-25 18:52:53 INFO2 take_spectra: Starting WAPP+GALFA scan: 811600075 2008-Apr-25 18:52:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-25 18:52:54 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-25 18:52:54 LOG5 begin_task: Level: (4) ID = <10033> Status = 0 0 0 0 ok 2008-Apr-25 18:52:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 18:52:54 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Apr-25 18:52:54 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 18:52:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:52:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:52:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82375.00 2008-Apr-25 18:52:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 18:52:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:52:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:52:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 18:52:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:52:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:52:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:52:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:52:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:53:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 18:53:05 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-25 18:53:05 LOG5 end_task: Level: (4) ID = <10033> Status = 0 0 0 0 ok 2008-Apr-25 18:53:05 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-25 18:53:05 LOG5 end_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2008-Apr-25 18:53:05 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2008-Apr-25 18:53:05 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2008-Apr-25 18:53:05 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2008-Apr-25 18:53:05 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-25 18:53:05 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.31975 J 2008-Apr-25 18:53:05 LOG2 antvel: Computed apparent RA = 09:43:29.3 Dec = +21:50:44.2 2008-Apr-25 18:53:05 LOG2 antvel: Parameters to Doppler: Topocentric 82385 2008 116 0.0 2008-Apr-25 18:53:05 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-25 18:53:05 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2008-Apr-25 18:53:05 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2008-Apr-25 18:53:05 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-25 18:53:05 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-25 18:53:05 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Apr-25 18:53:05 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 18:53:05 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-25 18:53:05 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-25 18:53:05 LOG5 begin_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2008-Apr-25 18:53:05 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-25 18:53:05 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.722333 2008.3197450059572 18.999933 2008-Apr-25 18:53:05 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333322 2008-Apr-25 18:53:05 LOG4 log_alfabeam: ALFABEAM 1 9.709532190818051 21.845895418762698 2008-Apr-25 18:53:05 LOG4 log_alfabeam: ALFABEAM 2 9.715410520854576 21.791943961085696 2008-Apr-25 18:53:05 LOG4 log_alfabeam: ALFABEAM 3 9.722555104079147 21.828943863278365 2008-Apr-25 18:53:05 LOG4 log_alfabeam: ALFABEAM 4 9.723800008198795 21.920939300635201 2008-Apr-25 18:53:05 LOG4 log_alfabeam: ALFABEAM 5 9.717883305789583 21.975018936780177 2008-Apr-25 18:53:05 LOG4 log_alfabeam: ALFABEAM 6 9.710760293176795 21.936975582908541 2008-Apr-25 18:53:05 INFO2 take_spectra: Starting WAPP+GALFA scan: 811600076 2008-Apr-25 18:53:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-25 18:53:06 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-25 18:53:06 LOG5 begin_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2008-Apr-25 18:53:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 18:53:06 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Apr-25 18:53:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 18:53:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:53:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:53:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82387.00 2008-Apr-25 18:53:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 18:53:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:53:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:53:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 18:53:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:53:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:53:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:53:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:53:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:53:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 18:53:17 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-25 18:53:17 LOG5 end_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2008-Apr-25 18:53:17 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-25 18:53:17 LOG5 end_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2008-Apr-25 18:53:17 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2008-Apr-25 18:53:17 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2008-Apr-25 18:53:17 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2008-Apr-25 18:53:17 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-25 18:53:17 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.31975 J 2008-Apr-25 18:53:17 LOG2 antvel: Computed apparent RA = 09:43:29.3 Dec = +21:50:44.2 2008-Apr-25 18:53:17 LOG2 antvel: Parameters to Doppler: Topocentric 82397 2008 116 0.0 2008-Apr-25 18:53:17 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-25 18:53:17 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2008-Apr-25 18:53:17 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2008-Apr-25 18:53:17 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-25 18:53:17 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-25 18:53:17 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Apr-25 18:53:17 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 18:53:17 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-25 18:53:17 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-25 18:53:17 LOG5 begin_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2008-Apr-25 18:53:17 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-25 18:53:17 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.725675 2008.3197453862144 18.999933 2008-Apr-25 18:53:17 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333329 2008-Apr-25 18:53:17 LOG4 log_alfabeam: ALFABEAM 1 9.709534708466784 21.845802750183616 2008-Apr-25 18:53:17 LOG4 log_alfabeam: ALFABEAM 2 9.715416603953583 21.791928107224688 2008-Apr-25 18:53:17 LOG4 log_alfabeam: ALFABEAM 3 9.722558741542194 21.829019556020388 2008-Apr-25 18:53:17 LOG4 log_alfabeam: ALFABEAM 4 9.723797466428133 21.921032734215455 2008-Apr-25 18:53:17 LOG4 log_alfabeam: ALFABEAM 5 9.717877059767089 21.975035254410528 2008-Apr-25 18:53:17 LOG4 log_alfabeam: ALFABEAM 6 9.710756662321968 21.936897353727275 2008-Apr-25 18:53:17 INFO2 take_spectra: Starting WAPP+GALFA scan: 811600077 2008-Apr-25 18:53:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-25 18:53:18 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-25 18:53:18 LOG5 begin_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2008-Apr-25 18:53:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 18:53:18 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Apr-25 18:53:18 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 18:53:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:53:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:53:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82399.00 2008-Apr-25 18:53:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 18:53:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:53:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:53:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 18:53:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:53:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:53:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:53:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:53:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:53:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 18:53:29 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-25 18:53:29 LOG5 end_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2008-Apr-25 18:53:29 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-25 18:53:29 LOG5 end_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2008-Apr-25 18:53:29 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2008-Apr-25 18:53:29 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2008-Apr-25 18:53:29 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2008-Apr-25 18:53:29 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-25 18:53:29 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.31975 J 2008-Apr-25 18:53:29 LOG2 antvel: Computed apparent RA = 09:43:29.3 Dec = +21:50:44.2 2008-Apr-25 18:53:29 LOG2 antvel: Parameters to Doppler: Topocentric 82409 2008 116 0.0 2008-Apr-25 18:53:29 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-25 18:53:29 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2008-Apr-25 18:53:29 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2008-Apr-25 18:53:29 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-25 18:53:29 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-25 18:53:29 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Apr-25 18:53:29 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 18:53:29 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-25 18:53:29 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-25 18:53:29 LOG5 begin_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2008-Apr-25 18:53:29 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-25 18:53:29 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.729018 2008.3197457664714 18.999933 2008-Apr-25 18:53:29 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333336 2008-Apr-25 18:53:29 LOG4 log_alfabeam: ALFABEAM 1 9.709537246332681 21.845709600978545 2008-Apr-25 18:53:29 LOG4 log_alfabeam: ALFABEAM 2 9.715422721780014 21.791912244956563 2008-Apr-25 18:53:29 LOG4 log_alfabeam: ALFABEAM 3 9.722562394104871 21.829095715239532 2008-Apr-25 18:53:29 LOG4 log_alfabeam: ALFABEAM 4 9.723794904179496 21.921126652719551 2008-Apr-25 18:53:29 LOG4 log_alfabeam: ALFABEAM 5 9.717870777909960 21.975051579831149 2008-Apr-25 18:53:29 LOG4 log_alfabeam: ALFABEAM 6 9.710753016711591 21.936818641780565 2008-Apr-25 18:53:29 INFO2 take_spectra: Starting WAPP+GALFA scan: 811600078 2008-Apr-25 18:53:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-25 18:53:30 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-25 18:53:30 LOG5 begin_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2008-Apr-25 18:53:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 18:53:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Apr-25 18:53:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 18:53:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:53:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:53:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82411.00 2008-Apr-25 18:53:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 18:53:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:53:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:53:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 18:53:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:53:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:53:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:53:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:53:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:53:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 18:53:41 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-25 18:53:41 LOG5 end_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2008-Apr-25 18:53:41 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-25 18:53:41 LOG5 end_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2008-Apr-25 18:53:41 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2008-Apr-25 18:53:41 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2008-Apr-25 18:53:41 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2008-Apr-25 18:53:41 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-25 18:53:41 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.31975 J 2008-Apr-25 18:53:41 LOG2 antvel: Computed apparent RA = 09:43:29.3 Dec = +21:50:44.2 2008-Apr-25 18:53:41 LOG2 antvel: Parameters to Doppler: Topocentric 82421 2008 116 0.0 2008-Apr-25 18:53:41 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-25 18:53:41 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2008-Apr-25 18:53:41 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2008-Apr-25 18:53:41 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-25 18:53:41 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-25 18:53:41 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Apr-25 18:53:41 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 18:53:41 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-25 18:53:41 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-25 18:53:41 LOG5 begin_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2008-Apr-25 18:53:41 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-25 18:53:41 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.732360 2008.3197461467284 18.999933 2008-Apr-25 18:53:41 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333333 2008-Apr-25 18:53:41 LOG4 log_alfabeam: ALFABEAM 1 9.709539803117654 21.845616022932717 2008-Apr-25 18:53:41 LOG4 log_alfabeam: ALFABEAM 2 9.715428870983141 21.791896384257960 2008-Apr-25 18:53:41 LOG4 log_alfabeam: ALFABEAM 3 9.722566059677412 21.829172299768295 2008-Apr-25 18:53:41 LOG4 log_alfabeam: ALFABEAM 4 9.723792322762419 21.921221003932025 2008-Apr-25 18:53:41 LOG4 log_alfabeam: ALFABEAM 5 9.717864463657106 21.975067902747170 2008-Apr-25 18:53:41 LOG4 log_alfabeam: ALFABEAM 6 9.710749358437198 21.936739489626255 2008-Apr-25 18:53:41 INFO2 take_spectra: Starting WAPP+GALFA scan: 811600079 2008-Apr-25 18:53:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-25 18:53:42 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-25 18:53:42 LOG5 begin_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2008-Apr-25 18:53:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 18:53:42 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Apr-25 18:53:42 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 18:53:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:53:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:53:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82423.00 2008-Apr-25 18:53:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 18:53:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:53:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:53:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 18:53:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:53:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:53:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:53:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:53:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:53:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 18:53:53 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-25 18:53:53 LOG5 end_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2008-Apr-25 18:53:53 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-25 18:53:53 LOG5 end_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2008-Apr-25 18:53:53 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2008-Apr-25 18:53:53 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2008-Apr-25 18:53:53 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2008-Apr-25 18:53:53 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-25 18:53:53 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.31975 J 2008-Apr-25 18:53:53 LOG2 antvel: Computed apparent RA = 09:43:29.3 Dec = +21:50:44.2 2008-Apr-25 18:53:53 LOG2 antvel: Parameters to Doppler: Topocentric 82433 2008 116 0.0 2008-Apr-25 18:53:53 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-25 18:53:53 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2008-Apr-25 18:53:53 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2008-Apr-25 18:53:53 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-25 18:53:53 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-25 18:53:53 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Apr-25 18:53:53 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 18:53:53 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-25 18:53:53 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-25 18:53:53 LOG5 begin_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2008-Apr-25 18:53:53 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-25 18:53:53 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.735703 2008.3197465269855 18.999933 2008-Apr-25 18:53:53 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666665 21.883333333333347 2008-Apr-25 18:53:53 LOG4 log_alfabeam: ALFABEAM 1 9.709542380575284 21.845521956056963 2008-Apr-25 18:53:53 LOG4 log_alfabeam: ALFABEAM 2 9.715435055556169 21.791880516137255 2008-Apr-25 18:53:53 LOG4 log_alfabeam: ALFABEAM 3 9.722569740549583 21.829249359892312 2008-Apr-25 18:53:53 LOG4 log_alfabeam: ALFABEAM 4 9.723789720405357 21.921315848334739 2008-Apr-25 18:53:53 LOG4 log_alfabeam: ALFABEAM 5 9.717858112906507 21.975084232384475 2008-Apr-25 18:53:53 LOG4 log_alfabeam: ALFABEAM 6 9.710745685219429 21.936659845303570 2008-Apr-25 18:53:53 INFO2 take_spectra: Starting WAPP+GALFA scan: 811600080 2008-Apr-25 18:53:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-25 18:53:54 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-25 18:53:54 LOG5 begin_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2008-Apr-25 18:53:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 18:53:54 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Apr-25 18:53:54 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 18:53:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:53:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:53:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82435.00 2008-Apr-25 18:53:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 18:53:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:53:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:53:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 18:53:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:53:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:53:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:53:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:53:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:54:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 18:54:05 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-25 18:54:05 LOG5 end_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2008-Apr-25 18:54:05 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-25 18:54:05 LOG5 end_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2008-Apr-25 18:54:05 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2008-Apr-25 18:54:05 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-25 18:54:05 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-25 18:54:05 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-25 18:54:05 LOG5 begin_task: Level: (3) ID = <10044> Status = 0 0 0 0 ok 2008-Apr-25 18:54:05 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-25 18:54:05 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-25 18:54:05 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-25 18:54:05 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-25 18:54:05 LOG5 end_task: Level: (3) ID = <10044> Status = 0 0 0 0 ok 2008-Apr-25 18:54:05 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2008-Apr-25 18:54:05 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2008-Apr-25 18:54:05 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2008-Apr-25 18:54:05 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-25 18:54:05 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.31975 J 2008-Apr-25 18:54:05 LOG2 antvel: Computed apparent RA = 09:43:29.3 Dec = +21:50:44.2 2008-Apr-25 18:54:05 LOG2 antvel: Parameters to Doppler: Topocentric 82445 2008 116 0.0 2008-Apr-25 18:54:05 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-25 18:54:05 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2008-Apr-25 18:54:05 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2008-Apr-25 18:54:05 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-25 18:54:05 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-25 18:54:05 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Apr-25 18:54:05 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 18:54:05 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-25 18:54:05 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-25 18:54:05 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2008-Apr-25 18:54:05 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-25 18:54:05 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.739045 2008.3197469072425 18.999933 2008-Apr-25 18:54:05 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333333 2008-Apr-25 18:54:05 LOG4 log_alfabeam: ALFABEAM 1 9.709544977390234 21.845427452597932 2008-Apr-25 18:54:05 LOG4 log_alfabeam: ALFABEAM 2 9.715441272116017 21.791864650601131 2008-Apr-25 18:54:05 LOG4 log_alfabeam: ALFABEAM 3 9.722573434616002 21.829326854018806 2008-Apr-25 18:54:05 LOG4 log_alfabeam: ALFABEAM 4 9.723787098435288 21.921411133246192 2008-Apr-25 18:54:05 LOG4 log_alfabeam: ALFABEAM 5 9.717851729130491 21.975100558417040 2008-Apr-25 18:54:05 LOG4 log_alfabeam: ALFABEAM 6 9.710741999165256 21.936579751811294 2008-Apr-25 18:54:05 INFO2 take_spectra: Starting WAPP+GALFA scan: 811600081 2008-Apr-25 18:54:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-25 18:54:06 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-25 18:54:06 LOG5 begin_task: Level: (4) ID = <10046> Status = 0 0 0 0 ok 2008-Apr-25 18:54:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 18:54:06 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Apr-25 18:54:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 18:54:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:54:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:54:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82447.00 2008-Apr-25 18:54:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 18:54:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:54:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:54:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 18:54:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:54:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:54:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:54:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:54:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:54:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.532 > 1.4)! 2008-Apr-25 18:54:08 LOG4 check_wapp_levels: WAPP-1 power levels: 1.299 1.210 1.277 1.510 2008-Apr-25 18:54:08 LOG4 check_wapp_levels: WAPP-2 power levels: 1.437 1.381 1.463 1.490 2008-Apr-25 18:54:08 LOG4 check_wapp_levels: WAPP-3 power levels: 1.376 1.389 1.532 1.258 2008-Apr-25 18:54:08 LOG4 check_wapp_levels: WAPP-4 power levels: 1.448 1.452 1.267 1.284 2008-Apr-25 18:54:10 INFO5 check_wapp_levels: WAPP power levels are between 1.210 and 1.530 (still bad) 2008-Apr-25 18:54:12 INFO5 check_wapp_levels: WAPP power levels are between 1.208 and 1.531 (still bad) 2008-Apr-25 18:54:14 INFO5 check_wapp_levels: WAPP power levels are between 1.208 and 1.530 (still bad) 2008-Apr-25 18:54:16 INFO5 check_wapp_levels: WAPP power levels are between 1.209 and 1.532 (still bad) 2008-Apr-25 18:54:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 18:54:17 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-25 18:54:17 LOG5 end_task: Level: (4) ID = <10046> Status = 0 0 0 0 ok 2008-Apr-25 18:54:17 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-25 18:54:17 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2008-Apr-25 18:54:17 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2008-Apr-25 18:54:17 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2008-Apr-25 18:54:17 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2008-Apr-25 18:54:17 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-25 18:54:17 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.31975 J 2008-Apr-25 18:54:17 LOG2 antvel: Computed apparent RA = 09:43:29.3 Dec = +21:50:44.2 2008-Apr-25 18:54:17 LOG2 antvel: Parameters to Doppler: Topocentric 82457 2008 116 0.0 2008-Apr-25 18:54:17 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-25 18:54:17 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2008-Apr-25 18:54:17 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2008-Apr-25 18:54:17 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-25 18:54:17 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-25 18:54:17 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Apr-25 18:54:17 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 18:54:17 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-25 18:54:17 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-25 18:54:17 LOG5 begin_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2008-Apr-25 18:54:17 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-25 18:54:17 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.742388 2008.3197472874997 18.999933 2008-Apr-25 18:54:17 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333340 2008-Apr-25 18:54:17 LOG4 log_alfabeam: ALFABEAM 1 9.709547595346589 21.845332451924076 2008-Apr-25 18:54:17 LOG4 log_alfabeam: ALFABEAM 2 9.715447524703867 21.791848778682404 2008-Apr-25 18:54:17 LOG4 log_alfabeam: ALFABEAM 3 9.722577144184800 21.829404833093445 2008-Apr-25 18:54:17 LOG4 log_alfabeam: ALFABEAM 4 9.723784455049765 21.921506919796194 2008-Apr-25 18:54:17 LOG4 log_alfabeam: ALFABEAM 5 9.717845308177502 21.975116890043449 2008-Apr-25 18:54:17 LOG4 log_alfabeam: ALFABEAM 6 9.710738297977585 21.936499156506741 2008-Apr-25 18:54:17 INFO2 take_spectra: Starting WAPP+GALFA scan: 811600082 2008-Apr-25 18:54:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-25 18:54:18 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-25 18:54:18 LOG5 begin_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2008-Apr-25 18:54:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 18:54:18 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Apr-25 18:54:18 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 18:54:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:54:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:54:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82459.00 2008-Apr-25 18:54:19 INFO5 check_wapp_levels: WAPP power levels are between 1.207 and 1.531 (still bad) 2008-Apr-25 18:54:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 18:54:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:54:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:54:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 18:54:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:54:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:54:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:54:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:54:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:54:21 INFO5 check_wapp_levels: WAPP power levels are between 1.188 and 1.487 (still bad) 2008-Apr-25 18:54:23 INFO5 check_wapp_levels: WAPP power levels are between 1.189 and 1.487 (still bad) 2008-Apr-25 18:54:25 INFO5 check_wapp_levels: WAPP power levels are between 1.190 and 1.488 (still bad) 2008-Apr-25 18:54:27 INFO5 check_wapp_levels: WAPP power levels are between 1.190 and 1.487 (still bad) 2008-Apr-25 18:54:29 INFO5 check_wapp_levels: WAPP power levels are between 1.189 and 1.486 (still bad) 2008-Apr-25 18:54:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 18:54:29 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-25 18:54:29 LOG5 end_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2008-Apr-25 18:54:29 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-25 18:54:29 LOG5 end_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2008-Apr-25 18:54:29 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2008-Apr-25 18:54:29 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2008-Apr-25 18:54:29 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2008-Apr-25 18:54:29 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-25 18:54:29 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.31975 J 2008-Apr-25 18:54:29 LOG2 antvel: Computed apparent RA = 09:43:29.3 Dec = +21:50:44.2 2008-Apr-25 18:54:29 LOG2 antvel: Parameters to Doppler: Topocentric 82469 2008 116 0.0 2008-Apr-25 18:54:29 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-25 18:54:29 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2008-Apr-25 18:54:29 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2008-Apr-25 18:54:29 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-25 18:54:29 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-25 18:54:29 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Apr-25 18:54:29 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 18:54:29 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-25 18:54:29 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-25 18:54:29 LOG5 begin_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2008-Apr-25 18:54:29 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-25 18:54:29 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.745730 2008.3197476677567 18.999933 2008-Apr-25 18:54:29 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666663 21.883333333333333 2008-Apr-25 18:54:29 LOG4 log_alfabeam: ALFABEAM 1 9.709550233111436 21.845237006750832 2008-Apr-25 18:54:29 LOG4 log_alfabeam: ALFABEAM 2 9.715453809903734 21.791832910417902 2008-Apr-25 18:54:29 LOG4 log_alfabeam: ALFABEAM 3 9.722580867134736 21.829483255091077 2008-Apr-25 18:54:29 LOG4 log_alfabeam: ALFABEAM 4 9.723781791593561 21.921603154829850 2008-Apr-25 18:54:29 LOG4 log_alfabeam: ALFABEAM 5 9.717838853553848 21.975133216906514 2008-Apr-25 18:54:29 LOG4 log_alfabeam: ALFABEAM 6 9.710734583779050 21.936418102837131 2008-Apr-25 18:54:29 INFO2 take_spectra: Starting WAPP+GALFA scan: 811600083 2008-Apr-25 18:54:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-25 18:54:30 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-25 18:54:30 LOG5 begin_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2008-Apr-25 18:54:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 18:54:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Apr-25 18:54:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 18:54:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:54:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:54:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82471.00 2008-Apr-25 18:54:31 INFO5 check_wapp_levels: WAPP power levels are between 1.188 and 1.485 (still bad) 2008-Apr-25 18:54:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 18:54:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:54:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:54:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 18:54:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:54:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:54:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:54:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:54:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:54:33 INFO5 check_wapp_levels: WAPP power levels are between 1.190 and 1.484 (still bad) 2008-Apr-25 18:54:35 INFO5 check_wapp_levels: WAPP power levels are between 1.187 and 1.484 (still bad) 2008-Apr-25 18:54:37 INFO5 check_wapp_levels: WAPP power levels are between 1.192 and 1.483 (still bad) 2008-Apr-25 18:54:39 INFO5 check_wapp_levels: WAPP power levels are between 1.187 and 1.482 (still bad) 2008-Apr-25 18:54:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 18:54:41 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-25 18:54:41 LOG5 end_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2008-Apr-25 18:54:41 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-25 18:54:41 LOG5 end_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2008-Apr-25 18:54:41 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2008-Apr-25 18:54:41 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2008-Apr-25 18:54:41 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2008-Apr-25 18:54:41 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-25 18:54:41 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.31975 J 2008-Apr-25 18:54:41 LOG2 antvel: Computed apparent RA = 09:43:29.3 Dec = +21:50:44.2 2008-Apr-25 18:54:41 LOG2 antvel: Parameters to Doppler: Topocentric 82481 2008 116 0.0 2008-Apr-25 18:54:41 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-25 18:54:41 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2008-Apr-25 18:54:41 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2008-Apr-25 18:54:41 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-25 18:54:41 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-25 18:54:41 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Apr-25 18:54:41 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 18:54:41 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-25 18:54:41 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-25 18:54:41 LOG5 begin_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2008-Apr-25 18:54:41 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-25 18:54:41 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.749073 2008.3197480480137 18.999933 2008-Apr-25 18:54:41 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333333 2008-Apr-25 18:54:41 LOG4 log_alfabeam: ALFABEAM 1 9.709552892500167 21.845141055792123 2008-Apr-25 18:54:41 LOG4 log_alfabeam: ALFABEAM 2 9.715460131805795 21.791817036867393 2008-Apr-25 18:54:41 LOG4 log_alfabeam: ALFABEAM 3 9.722584605792525 21.829562171631899 2008-Apr-25 18:54:41 LOG4 log_alfabeam: ALFABEAM 4 9.723779106232509 21.921699900137043 2008-Apr-25 18:54:41 LOG4 log_alfabeam: ALFABEAM 5 9.717832361057425 21.975149548174684 2008-Apr-25 18:54:41 LOG4 log_alfabeam: ALFABEAM 6 9.710730854254646 21.936336537462772 2008-Apr-25 18:54:41 INFO2 take_spectra: Starting WAPP+GALFA scan: 811600084 2008-Apr-25 18:54:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-25 18:54:42 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-25 18:54:42 LOG5 begin_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2008-Apr-25 18:54:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 18:54:42 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Apr-25 18:54:42 INFO5 check_wapp_levels: WAPP power levels are between 1.189 and 1.482 (still bad) 2008-Apr-25 18:54:42 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 18:54:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:54:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:54:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82483.00 2008-Apr-25 18:54:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 18:54:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:54:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:54:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 18:54:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:54:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:54:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:54:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:54:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:54:44 INFO5 check_wapp_levels: WAPP power levels are between 1.189 and 1.482 (still bad) 2008-Apr-25 18:54:46 INFO5 check_wapp_levels: WAPP power levels are between 1.185 and 1.478 (still bad) 2008-Apr-25 18:54:48 INFO5 check_wapp_levels: WAPP power levels are between 1.184 and 1.480 (still bad) 2008-Apr-25 18:54:50 INFO5 check_wapp_levels: WAPP power levels are between 1.182 and 1.477 (still bad) 2008-Apr-25 18:54:52 INFO5 check_wapp_levels: WAPP power levels are between 1.184 and 1.480 (still bad) 2008-Apr-25 18:54:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 18:54:53 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-25 18:54:53 LOG5 end_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2008-Apr-25 18:54:53 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-25 18:54:53 LOG5 end_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2008-Apr-25 18:54:53 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2008-Apr-25 18:54:53 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2008-Apr-25 18:54:53 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2008-Apr-25 18:54:53 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-25 18:54:53 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.31975 J 2008-Apr-25 18:54:53 LOG2 antvel: Computed apparent RA = 09:43:29.3 Dec = +21:50:44.2 2008-Apr-25 18:54:53 LOG2 antvel: Parameters to Doppler: Topocentric 82493 2008 116 0.0 2008-Apr-25 18:54:53 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-25 18:54:53 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2008-Apr-25 18:54:53 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2008-Apr-25 18:54:53 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-25 18:54:53 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-25 18:54:53 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Apr-25 18:54:53 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 18:54:53 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-25 18:54:53 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-25 18:54:53 LOG5 begin_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2008-Apr-25 18:54:53 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-25 18:54:53 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.752415 2008.3197484282707 18.999933 2008-Apr-25 18:54:53 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333329 2008-Apr-25 18:54:53 LOG4 log_alfabeam: ALFABEAM 1 9.709555572161950 21.845044652239856 2008-Apr-25 18:54:53 LOG4 log_alfabeam: ALFABEAM 2 9.715466486960599 21.791801168098004 2008-Apr-25 18:54:53 LOG4 log_alfabeam: ALFABEAM 3 9.722588358020831 21.829641540251039 2008-Apr-25 18:54:53 LOG4 log_alfabeam: ALFABEAM 4 9.723776400329481 21.921797102081889 2008-Apr-25 18:54:53 LOG4 log_alfabeam: ALFABEAM 5 9.717825834229050 21.975165873459581 2008-Apr-25 18:54:53 LOG4 log_alfabeam: ALFABEAM 6 9.710727111542843 21.936254504287060 2008-Apr-25 18:54:53 INFO2 take_spectra: Starting WAPP+GALFA scan: 811600085 2008-Apr-25 18:54:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-25 18:54:54 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-25 18:54:54 LOG5 begin_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2008-Apr-25 18:54:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 18:54:54 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Apr-25 18:54:54 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 18:54:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:54:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:54:54 INFO5 check_wapp_levels: WAPP power levels are between 1.183 and 1.479 (still bad) 2008-Apr-25 18:54:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82495.00 2008-Apr-25 18:54:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 18:54:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:54:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:54:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 18:54:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:54:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:54:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:54:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:54:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:54:56 INFO5 check_wapp_levels: WAPP power levels are between 1.183 and 1.479 (still bad) 2008-Apr-25 18:54:58 INFO5 check_wapp_levels: WAPP power levels are between 1.188 and 1.479 (still bad) 2008-Apr-25 18:55:00 INFO5 check_wapp_levels: WAPP power levels are between 1.185 and 1.476 (still bad) 2008-Apr-25 18:55:02 INFO5 check_wapp_levels: WAPP power levels are between 1.187 and 1.477 (still bad) 2008-Apr-25 18:55:04 INFO5 check_wapp_levels: WAPP power levels are between 1.187 and 1.475 (still bad) 2008-Apr-25 18:55:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 18:55:05 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-25 18:55:05 LOG5 end_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2008-Apr-25 18:55:05 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-25 18:55:05 LOG5 end_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2008-Apr-25 18:55:05 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2008-Apr-25 18:55:05 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2008-Apr-25 18:55:05 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2008-Apr-25 18:55:05 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-25 18:55:05 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.31975 J 2008-Apr-25 18:55:05 LOG2 antvel: Computed apparent RA = 09:43:29.3 Dec = +21:50:44.2 2008-Apr-25 18:55:05 LOG2 antvel: Parameters to Doppler: Topocentric 82505 2008 116 0.0 2008-Apr-25 18:55:05 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-25 18:55:05 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2008-Apr-25 18:55:05 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2008-Apr-25 18:55:05 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-25 18:55:05 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-25 18:55:05 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Apr-25 18:55:05 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 18:55:05 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-25 18:55:05 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-25 18:55:05 LOG5 begin_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2008-Apr-25 18:55:05 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-25 18:55:05 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.755757 2008.3197488085279 18.999933 2008-Apr-25 18:55:05 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333340 2008-Apr-25 18:55:05 LOG4 log_alfabeam: ALFABEAM 1 9.709558273132879 21.844947763205358 2008-Apr-25 18:55:05 LOG4 log_alfabeam: ALFABEAM 2 9.715472877590789 21.791785299947097 2008-Apr-25 18:55:05 LOG4 log_alfabeam: ALFABEAM 3 9.722592125035838 21.829721389293205 2008-Apr-25 18:55:05 LOG4 log_alfabeam: ALFABEAM 4 9.723773672837178 21.921894793821529 2008-Apr-25 18:55:05 LOG4 log_alfabeam: ALFABEAM 5 9.717819270784478 21.975182197012479 2008-Apr-25 18:55:05 LOG4 log_alfabeam: ALFABEAM 6 9.710723354436903 21.936171974027609 2008-Apr-25 18:55:05 INFO2 take_spectra: Starting WAPP+GALFA scan: 811600086 2008-Apr-25 18:55:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-25 18:55:06 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-25 18:55:06 LOG5 begin_task: Level: (4) ID = <10056> Status = 0 0 0 0 ok 2008-Apr-25 18:55:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 18:55:06 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Apr-25 18:55:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 18:55:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:55:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:55:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82507.00 2008-Apr-25 18:55:07 INFO5 check_wapp_levels: WAPP power levels are between 1.187 and 1.474 (still bad) 2008-Apr-25 18:55:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 18:55:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:55:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:55:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 18:55:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:55:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:55:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:55:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:55:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:55:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.478 > 1.4)! 2008-Apr-25 18:55:09 LOG4 check_wapp_levels: WAPP-1 power levels: 1.236 1.188 1.208 1.478 2008-Apr-25 18:55:09 LOG4 check_wapp_levels: WAPP-2 power levels: 1.410 1.335 1.369 1.445 2008-Apr-25 18:55:09 LOG4 check_wapp_levels: WAPP-3 power levels: 1.302 1.348 1.425 1.202 2008-Apr-25 18:55:09 LOG4 check_wapp_levels: WAPP-4 power levels: 1.414 1.428 1.238 1.264 2008-Apr-25 18:55:11 INFO5 check_wapp_levels: WAPP power levels are between 1.188 and 1.476 (still bad) 2008-Apr-25 18:55:13 INFO5 check_wapp_levels: WAPP power levels are between 1.187 and 1.477 (still bad) 2008-Apr-25 18:55:15 INFO5 check_wapp_levels: WAPP power levels are between 1.188 and 1.477 (still bad) 2008-Apr-25 18:55:17 INFO5 check_wapp_levels: WAPP power levels are between 1.185 and 1.476 (still bad) 2008-Apr-25 18:55:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 18:55:17 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-25 18:55:17 LOG5 end_task: Level: (4) ID = <10056> Status = 0 0 0 0 ok 2008-Apr-25 18:55:17 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-25 18:55:17 LOG5 end_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2008-Apr-25 18:55:17 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2008-Apr-25 18:55:17 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2008-Apr-25 18:55:17 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2008-Apr-25 18:55:17 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-25 18:55:17 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.31975 J 2008-Apr-25 18:55:17 LOG2 antvel: Computed apparent RA = 09:43:29.3 Dec = +21:50:44.2 2008-Apr-25 18:55:17 LOG2 antvel: Parameters to Doppler: Topocentric 82517 2008 116 0.0 2008-Apr-25 18:55:17 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-25 18:55:17 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2008-Apr-25 18:55:17 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2008-Apr-25 18:55:17 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-25 18:55:17 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-25 18:55:17 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Apr-25 18:55:17 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 18:55:17 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-25 18:55:17 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-25 18:55:17 LOG5 begin_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2008-Apr-25 18:55:17 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-25 18:55:17 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.759100 2008.319749188785 18.999933 2008-Apr-25 18:55:17 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333322 2008-Apr-25 18:55:17 LOG4 log_alfabeam: ALFABEAM 1 9.709560996478126 21.844850355171317 2008-Apr-25 18:55:17 LOG4 log_alfabeam: ALFABEAM 2 9.715479305965591 21.791769428268221 2008-Apr-25 18:55:17 LOG4 log_alfabeam: ALFABEAM 3 9.722595908072051 21.829801747741246 2008-Apr-25 18:55:17 LOG4 log_alfabeam: ALFABEAM 4 9.723770922678773 21.921993009147123 2008-Apr-25 18:55:17 LOG4 log_alfabeam: ALFABEAM 5 9.717812668391312 21.975198523065970 2008-Apr-25 18:55:17 LOG4 log_alfabeam: ALFABEAM 6 9.710719581712286 21.936088916742392 2008-Apr-25 18:55:17 INFO2 take_spectra: Starting WAPP+GALFA scan: 811600087 2008-Apr-25 18:55:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-25 18:55:18 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-25 18:55:18 LOG5 begin_task: Level: (4) ID = <10058> Status = 0 0 0 0 ok 2008-Apr-25 18:55:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 18:55:18 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Apr-25 18:55:18 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 18:55:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:55:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:55:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82519.00 2008-Apr-25 18:55:19 INFO5 check_wapp_levels: WAPP power levels are between 1.188 and 1.476 (still bad) 2008-Apr-25 18:55:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 18:55:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:55:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:55:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 18:55:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:55:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:55:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:55:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:55:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:55:21 INFO5 check_wapp_levels: WAPP power levels are between 1.191 and 1.477 (still bad) 2008-Apr-25 18:55:23 INFO5 check_wapp_levels: WAPP power levels are between 1.190 and 1.477 (still bad) 2008-Apr-25 18:55:25 INFO5 check_wapp_levels: WAPP power levels are between 1.189 and 1.477 (still bad) 2008-Apr-25 18:55:27 INFO5 check_wapp_levels: WAPP power levels are between 1.189 and 1.477 (still bad) 2008-Apr-25 18:55:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 18:55:29 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-25 18:55:29 LOG5 end_task: Level: (4) ID = <10058> Status = 0 0 0 0 ok 2008-Apr-25 18:55:29 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-25 18:55:29 LOG5 end_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2008-Apr-25 18:55:29 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2008-Apr-25 18:55:29 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2008-Apr-25 18:55:29 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2008-Apr-25 18:55:29 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-25 18:55:29 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-25 18:55:29 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-25 18:55:29 LOG5 begin_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2008-Apr-25 18:55:29 INFO5 check_wapp_levels: WAPP power levels are between 1.186 and 1.477 (still bad) 2008-Apr-25 18:55:29 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-25 18:55:29 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-25 18:55:29 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-25 18:55:29 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-25 18:55:29 LOG5 end_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2008-Apr-25 18:55:29 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2008-Apr-25 18:55:29 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2008-Apr-25 18:55:29 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2008-Apr-25 18:55:29 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2008-Apr-25 18:55:29 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-25 18:55:29 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.31975 J 2008-Apr-25 18:55:29 LOG2 antvel: Computed apparent RA = 09:43:29.3 Dec = +21:50:44.2 2008-Apr-25 18:55:29 LOG2 antvel: Parameters to Doppler: Topocentric 82529 2008 116 0.0 2008-Apr-25 18:55:29 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-25 18:55:29 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2008-Apr-25 18:55:29 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2008-Apr-25 18:55:29 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-25 18:55:29 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-25 18:55:29 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Apr-25 18:55:29 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 18:55:29 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-25 18:55:29 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-25 18:55:29 LOG5 begin_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2008-Apr-25 18:55:29 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-25 18:55:29 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.762442 2008.319749569042 18.999933 2008-Apr-25 18:55:29 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333340 2008-Apr-25 18:55:29 LOG4 log_alfabeam: ALFABEAM 1 9.709563740819428 21.844752482058599 2008-Apr-25 18:55:29 LOG4 log_alfabeam: ALFABEAM 2 9.715485768584378 21.791753563174076 2008-Apr-25 18:55:29 LOG4 log_alfabeam: ALFABEAM 3 9.722599704967562 21.829882572456555 2008-Apr-25 18:55:29 LOG4 log_alfabeam: ALFABEAM 4 9.723768151244961 21.922091693686919 2008-Apr-25 18:55:29 LOG4 log_alfabeam: ALFABEAM 5 9.717806030643262 21.975214841184901 2008-Apr-25 18:55:29 LOG4 log_alfabeam: ALFABEAM 6 9.710715795531726 21.936005377033656 2008-Apr-25 18:55:29 INFO2 take_spectra: Starting WAPP+GALFA scan: 811600088 2008-Apr-25 18:55:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-25 18:55:30 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-25 18:55:30 LOG5 begin_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2008-Apr-25 18:55:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 18:55:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Apr-25 18:55:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 18:55:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:55:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:55:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82531.00 2008-Apr-25 18:55:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 18:55:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:55:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:55:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 18:55:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:55:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:55:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:55:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:55:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:55:32 INFO5 check_wapp_levels: WAPP power levels are between 0.934 and 1.446 (still bad) 2008-Apr-25 18:55:34 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.906 and 1.123 2008-Apr-25 18:55:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 18:55:41 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-25 18:55:41 LOG5 end_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2008-Apr-25 18:55:41 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-25 18:55:41 LOG5 end_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2008-Apr-25 18:55:41 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2008-Apr-25 18:55:41 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2008-Apr-25 18:55:41 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2008-Apr-25 18:55:41 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-25 18:55:41 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.31975 J 2008-Apr-25 18:55:41 LOG2 antvel: Computed apparent RA = 09:43:29.3 Dec = +21:50:44.2 2008-Apr-25 18:55:41 LOG2 antvel: Parameters to Doppler: Topocentric 82541 2008 116 0.0 2008-Apr-25 18:55:41 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-25 18:55:41 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2008-Apr-25 18:55:41 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2008-Apr-25 18:55:41 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-25 18:55:41 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-25 18:55:41 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Apr-25 18:55:41 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 18:55:41 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-25 18:55:41 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-25 18:55:41 LOG5 begin_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2008-Apr-25 18:55:41 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-25 18:55:41 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.765785 2008.319749949299 18.999933 2008-Apr-25 18:55:41 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666665 21.883333333333340 2008-Apr-25 18:55:41 LOG4 log_alfabeam: ALFABEAM 1 9.709566508053975 21.844654080889967 2008-Apr-25 18:55:41 LOG4 log_alfabeam: ALFABEAM 2 9.715492269664299 21.791737695803899 2008-Apr-25 18:55:41 LOG4 log_alfabeam: ALFABEAM 3 9.722603518096642 21.829963916812243 2008-Apr-25 18:55:41 LOG4 log_alfabeam: ALFABEAM 4 9.723765356618653 21.922190910935921 2008-Apr-25 18:55:41 LOG4 log_alfabeam: ALFABEAM 5 9.717799353207178 21.975231160449127 2008-Apr-25 18:55:41 LOG4 log_alfabeam: ALFABEAM 6 9.710711993534481 21.935921299750703 2008-Apr-25 18:55:41 INFO2 take_spectra: Starting WAPP+GALFA scan: 811600089 2008-Apr-25 18:55:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-25 18:55:42 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-25 18:55:42 LOG5 begin_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2008-Apr-25 18:55:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 18:55:42 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Apr-25 18:55:42 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 18:55:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:55:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:55:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82543.00 2008-Apr-25 18:55:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 18:55:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:55:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:55:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 18:55:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:55:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:55:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:55:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:55:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:55:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 18:55:53 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-25 18:55:53 LOG5 end_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2008-Apr-25 18:55:53 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-25 18:55:53 LOG5 end_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2008-Apr-25 18:55:53 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2008-Apr-25 18:55:53 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2008-Apr-25 18:55:53 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2008-Apr-25 18:55:53 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-25 18:55:53 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.31975 J 2008-Apr-25 18:55:53 LOG2 antvel: Computed apparent RA = 09:43:29.3 Dec = +21:50:44.2 2008-Apr-25 18:55:53 LOG2 antvel: Parameters to Doppler: Topocentric 82553 2008 116 0.0 2008-Apr-25 18:55:53 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-25 18:55:53 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2008-Apr-25 18:55:53 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2008-Apr-25 18:55:53 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-25 18:55:53 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-25 18:55:53 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Apr-25 18:55:53 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 18:55:53 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-25 18:55:53 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-25 18:55:53 LOG5 begin_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2008-Apr-25 18:55:53 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-25 18:55:53 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.769127 2008.319750329556 18.999933 2008-Apr-25 18:55:53 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333347 2008-Apr-25 18:55:53 LOG4 log_alfabeam: ALFABEAM 1 9.709569296784771 21.844555206082156 2008-Apr-25 18:55:53 LOG4 log_alfabeam: ALFABEAM 2 9.715498805669842 21.791721836300717 2008-Apr-25 18:55:53 LOG4 log_alfabeam: ALFABEAM 3 9.722607345280673 21.830045737210877 2008-Apr-25 18:55:53 LOG4 log_alfabeam: ALFABEAM 4 9.723762540209494 21.922290606021679 2008-Apr-25 18:55:53 LOG4 log_alfabeam: ALFABEAM 5 9.717792639712767 21.975247470392180 2008-Apr-25 18:55:53 LOG4 log_alfabeam: ALFABEAM 6 9.710708177899738 21.935836729971665 2008-Apr-25 18:55:53 INFO2 take_spectra: Starting WAPP+GALFA scan: 811600090 2008-Apr-25 18:55:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-25 18:55:54 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-25 18:55:54 LOG5 begin_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2008-Apr-25 18:55:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 18:55:54 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Apr-25 18:55:54 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 18:55:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:55:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:55:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82555.00 2008-Apr-25 18:55:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 18:55:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:55:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:55:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 18:55:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:55:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:55:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:55:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:55:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:56:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 18:56:05 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-25 18:56:05 LOG5 end_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2008-Apr-25 18:56:05 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-25 18:56:05 LOG5 end_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2008-Apr-25 18:56:05 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2008-Apr-25 18:56:05 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2008-Apr-25 18:56:05 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2008-Apr-25 18:56:05 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-25 18:56:05 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.31975 J 2008-Apr-25 18:56:05 LOG2 antvel: Computed apparent RA = 09:43:29.3 Dec = +21:50:44.2 2008-Apr-25 18:56:05 LOG2 antvel: Parameters to Doppler: Topocentric 82565 2008 116 0.0 2008-Apr-25 18:56:05 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-25 18:56:05 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2008-Apr-25 18:56:05 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2008-Apr-25 18:56:05 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-25 18:56:05 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-25 18:56:05 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Apr-25 18:56:05 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 18:56:05 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-25 18:56:05 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-25 18:56:05 LOG5 begin_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2008-Apr-25 18:56:05 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-25 18:56:05 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.772470 2008.3197507098132 18.999933 2008-Apr-25 18:56:05 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333333 2008-Apr-25 18:56:05 LOG4 log_alfabeam: ALFABEAM 1 9.709572108943220 21.844455793958801 2008-Apr-25 18:56:05 LOG4 log_alfabeam: ALFABEAM 2 9.715505380870876 21.791705975840909 2008-Apr-25 18:56:05 LOG4 log_alfabeam: ALFABEAM 3 9.722611188913366 21.830128087754602 2008-Apr-25 18:56:05 LOG4 log_alfabeam: ALFABEAM 4 9.723759700065711 21.922390843144168 2008-Apr-25 18:56:05 LOG4 log_alfabeam: ALFABEAM 5 9.717785885772498 21.975263780052906 2008-Apr-25 18:56:05 LOG4 log_alfabeam: ALFABEAM 6 9.710704346248088 21.935751611792885 2008-Apr-25 18:56:05 INFO2 take_spectra: Starting WAPP+GALFA scan: 811600091 2008-Apr-25 18:56:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-25 18:56:06 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-25 18:56:06 LOG5 begin_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2008-Apr-25 18:56:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 18:56:06 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Apr-25 18:56:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 18:56:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:56:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:56:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82567.00 2008-Apr-25 18:56:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 18:56:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:56:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:56:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 18:56:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:56:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:56:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:56:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:56:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:56:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 18:56:17 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-25 18:56:17 LOG5 end_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2008-Apr-25 18:56:17 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-25 18:56:17 LOG5 end_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2008-Apr-25 18:56:17 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2008-Apr-25 18:56:17 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2008-Apr-25 18:56:17 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2008-Apr-25 18:56:17 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-25 18:56:17 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.31975 J 2008-Apr-25 18:56:17 LOG2 antvel: Computed apparent RA = 09:43:29.3 Dec = +21:50:44.2 2008-Apr-25 18:56:17 LOG2 antvel: Parameters to Doppler: Topocentric 82577 2008 116 0.0 2008-Apr-25 18:56:17 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-25 18:56:17 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2008-Apr-25 18:56:17 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2008-Apr-25 18:56:17 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-25 18:56:17 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-25 18:56:17 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Apr-25 18:56:17 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 18:56:17 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-25 18:56:17 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-25 18:56:17 LOG5 begin_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2008-Apr-25 18:56:17 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-25 18:56:17 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.775812 2008.3197510900702 18.999933 2008-Apr-25 18:56:17 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666665 21.883333333333336 2008-Apr-25 18:56:17 LOG4 log_alfabeam: ALFABEAM 1 9.709574943113267 21.844355899440561 2008-Apr-25 18:56:17 LOG4 log_alfabeam: ALFABEAM 2 9.715511991696433 21.791690124597963 2008-Apr-25 18:56:17 LOG4 log_alfabeam: ALFABEAM 3 9.722615046799167 21.830210924379273 2008-Apr-25 18:56:17 LOG4 log_alfabeam: ALFABEAM 4 9.723756837616250 21.922491566922169 2008-Apr-25 18:56:17 LOG4 log_alfabeam: ALFABEAM 5 9.717779095052688 21.975280078933519 2008-Apr-25 18:56:17 LOG4 log_alfabeam: ALFABEAM 6 9.710700500775413 21.935665990776545 2008-Apr-25 18:56:17 INFO2 take_spectra: Starting WAPP+GALFA scan: 811600092 2008-Apr-25 18:56:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-25 18:56:18 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-25 18:56:18 LOG5 begin_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2008-Apr-25 18:56:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 18:56:18 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Apr-25 18:56:18 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 18:56:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:56:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:56:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82579.00 2008-Apr-25 18:56:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 18:56:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:56:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:56:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 18:56:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:56:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:56:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:56:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:56:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:56:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 18:56:29 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-25 18:56:29 LOG5 end_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2008-Apr-25 18:56:29 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-25 18:56:29 LOG5 end_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2008-Apr-25 18:56:29 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2008-Apr-25 18:56:29 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2008-Apr-25 18:56:29 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2008-Apr-25 18:56:29 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-25 18:56:29 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.31975 J 2008-Apr-25 18:56:29 LOG2 antvel: Computed apparent RA = 09:43:29.3 Dec = +21:50:44.2 2008-Apr-25 18:56:29 LOG2 antvel: Parameters to Doppler: Topocentric 82589 2008 116 0.0 2008-Apr-25 18:56:29 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-25 18:56:29 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2008-Apr-25 18:56:29 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2008-Apr-25 18:56:29 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-25 18:56:29 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-25 18:56:29 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Apr-25 18:56:29 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 18:56:29 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-25 18:56:29 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-25 18:56:29 LOG5 begin_task: Level: (3) ID = <10070> Status = 0 0 0 0 ok 2008-Apr-25 18:56:29 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-25 18:56:29 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.779155 2008.3197514703272 18.999933 2008-Apr-25 18:56:29 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333347 2008-Apr-25 18:56:29 LOG4 log_alfabeam: ALFABEAM 1 9.709577801261458 21.844255458138591 2008-Apr-25 18:56:29 LOG4 log_alfabeam: ALFABEAM 2 9.715518642470180 21.791674273788658 2008-Apr-25 18:56:29 LOG4 log_alfabeam: ALFABEAM 3 9.722618921351465 21.830294301932611 2008-Apr-25 18:56:29 LOG4 log_alfabeam: ALFABEAM 4 9.723753950873736 21.922592842274060 2008-Apr-25 18:56:29 LOG4 log_alfabeam: ALFABEAM 5 9.717772263110284 21.975296376028286 2008-Apr-25 18:56:29 LOG4 log_alfabeam: ALFABEAM 6 9.710696639083427 21.935579810249067 2008-Apr-25 18:56:29 INFO2 take_spectra: Starting WAPP+GALFA scan: 811600093 2008-Apr-25 18:56:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-25 18:56:30 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-25 18:56:30 LOG5 begin_task: Level: (4) ID = <10071> Status = 0 0 0 0 ok 2008-Apr-25 18:56:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 18:56:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Apr-25 18:56:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 18:56:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:56:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:56:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82591.00 2008-Apr-25 18:56:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 18:56:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:56:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:56:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 18:56:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:56:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:56:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:56:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:56:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:56:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 18:56:41 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-25 18:56:41 LOG5 end_task: Level: (4) ID = <10071> Status = 0 0 0 0 ok 2008-Apr-25 18:56:41 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-25 18:56:41 LOG5 end_task: Level: (3) ID = <10070> Status = 0 0 0 0 ok 2008-Apr-25 18:56:41 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2008-Apr-25 18:56:41 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2008-Apr-25 18:56:41 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2008-Apr-25 18:56:41 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-25 18:56:41 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.31975 J 2008-Apr-25 18:56:41 LOG2 antvel: Computed apparent RA = 09:43:29.3 Dec = +21:50:44.2 2008-Apr-25 18:56:41 LOG2 antvel: Parameters to Doppler: Topocentric 82601 2008 116 0.0 2008-Apr-25 18:56:41 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-25 18:56:41 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2008-Apr-25 18:56:41 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2008-Apr-25 18:56:41 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-25 18:56:41 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-25 18:56:41 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Apr-25 18:56:41 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 18:56:41 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-25 18:56:41 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-25 18:56:41 LOG5 begin_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2008-Apr-25 18:56:41 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-25 18:56:41 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.782497 2008.3197518505842 18.999933 2008-Apr-25 18:56:41 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333347 2008-Apr-25 18:56:41 LOG4 log_alfabeam: ALFABEAM 1 9.709580681952291 21.844154525485539 2008-Apr-25 18:56:41 LOG4 log_alfabeam: ALFABEAM 2 9.715525329585114 21.791658433616842 2008-Apr-25 18:56:41 LOG4 log_alfabeam: ALFABEAM 3 9.722622810357510 21.830378175875651 2008-Apr-25 18:56:41 LOG4 log_alfabeam: ALFABEAM 4 9.723751041286789 21.922694613301584 2008-Apr-25 18:56:41 LOG4 log_alfabeam: ALFABEAM 5 9.717765393648802 21.975312660808086 2008-Apr-25 18:56:41 LOG4 log_alfabeam: ALFABEAM 6 9.710692763384962 21.935493116265022 2008-Apr-25 18:56:41 INFO2 take_spectra: Starting WAPP+GALFA scan: 811600094 2008-Apr-25 18:56:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-25 18:56:42 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-25 18:56:42 LOG5 begin_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2008-Apr-25 18:56:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 18:56:42 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Apr-25 18:56:42 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 18:56:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:56:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:56:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82603.00 2008-Apr-25 18:56:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 18:56:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:56:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:56:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 18:56:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:56:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:56:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:56:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:56:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:56:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 18:56:53 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-25 18:56:53 LOG5 end_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2008-Apr-25 18:56:53 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-25 18:56:53 LOG5 end_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2008-Apr-25 18:56:53 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2008-Apr-25 18:56:53 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-25 18:56:53 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-25 18:56:53 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-25 18:56:53 LOG5 begin_task: Level: (3) ID = <10074> Status = 0 0 0 0 ok 2008-Apr-25 18:56:53 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-25 18:56:53 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-25 18:56:53 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-25 18:56:53 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-25 18:56:53 LOG5 end_task: Level: (3) ID = <10074> Status = 0 0 0 0 ok 2008-Apr-25 18:56:53 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2008-Apr-25 18:56:53 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2008-Apr-25 18:56:53 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2008-Apr-25 18:56:53 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-25 18:56:53 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.31975 J 2008-Apr-25 18:56:53 LOG2 antvel: Computed apparent RA = 09:43:29.3 Dec = +21:50:44.2 2008-Apr-25 18:56:53 LOG2 antvel: Parameters to Doppler: Topocentric 82613 2008 116 0.0 2008-Apr-25 18:56:53 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-25 18:56:53 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2008-Apr-25 18:56:53 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2008-Apr-25 18:56:53 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-25 18:56:53 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-25 18:56:53 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Apr-25 18:56:53 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 18:56:53 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-25 18:56:53 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-25 18:56:53 LOG5 begin_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2008-Apr-25 18:56:53 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-25 18:56:53 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.785840 2008.3197522308412 18.999933 2008-Apr-25 18:56:53 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666665 21.883333333333333 2008-Apr-25 18:56:53 LOG4 log_alfabeam: ALFABEAM 1 9.709583587188385 21.844053036366390 2008-Apr-25 18:56:53 LOG4 log_alfabeam: ALFABEAM 2 9.715532057419862 21.791642595343134 2008-Apr-25 18:56:53 LOG4 log_alfabeam: ALFABEAM 3 9.722626716250613 21.830462601818812 2008-Apr-25 18:56:53 LOG4 log_alfabeam: ALFABEAM 4 9.723748106831446 21.922796945655261 2008-Apr-25 18:56:53 LOG4 log_alfabeam: ALFABEAM 5 9.717758482168486 21.975328942218919 2008-Apr-25 18:56:53 LOG4 log_alfabeam: ALFABEAM 6 9.710688871262608 21.935405851363221 2008-Apr-25 18:56:53 INFO2 take_spectra: Starting WAPP+GALFA scan: 811600095 2008-Apr-25 18:56:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-25 18:56:54 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-25 18:56:54 LOG5 begin_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2008-Apr-25 18:56:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 18:56:54 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Apr-25 18:56:54 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 18:56:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:56:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:56:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82615.00 2008-Apr-25 18:56:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 18:56:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:56:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:56:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 18:56:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:56:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:56:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:56:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:56:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:56:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.526 > 1.4)! 2008-Apr-25 18:56:57 LOG4 check_wapp_levels: WAPP-1 power levels: 1.293 1.206 1.272 1.501 2008-Apr-25 18:56:57 LOG4 check_wapp_levels: WAPP-2 power levels: 1.429 1.378 1.457 1.482 2008-Apr-25 18:56:57 LOG4 check_wapp_levels: WAPP-3 power levels: 1.365 1.381 1.526 1.250 2008-Apr-25 18:56:57 LOG4 check_wapp_levels: WAPP-4 power levels: 1.444 1.447 1.264 1.279 2008-Apr-25 18:56:59 INFO5 check_wapp_levels: WAPP power levels are between 1.207 and 1.527 (still bad) 2008-Apr-25 18:57:01 INFO5 check_wapp_levels: WAPP power levels are between 1.205 and 1.526 (still bad) 2008-Apr-25 18:57:03 INFO5 check_wapp_levels: WAPP power levels are between 1.206 and 1.529 (still bad) 2008-Apr-25 18:57:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 18:57:05 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-25 18:57:05 LOG5 end_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2008-Apr-25 18:57:05 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-25 18:57:05 LOG5 end_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2008-Apr-25 18:57:05 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2008-Apr-25 18:57:05 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2008-Apr-25 18:57:05 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2008-Apr-25 18:57:05 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-25 18:57:05 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.31975 J 2008-Apr-25 18:57:05 LOG2 antvel: Computed apparent RA = 09:43:29.3 Dec = +21:50:44.2 2008-Apr-25 18:57:05 LOG2 antvel: Parameters to Doppler: Topocentric 82625 2008 116 0.0 2008-Apr-25 18:57:05 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-25 18:57:05 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2008-Apr-25 18:57:05 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2008-Apr-25 18:57:05 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-25 18:57:05 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-25 18:57:05 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Apr-25 18:57:05 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 18:57:05 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-25 18:57:05 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-25 18:57:05 LOG5 begin_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2008-Apr-25 18:57:05 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-25 18:57:05 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.789182 2008.3197526110985 18.999933 2008-Apr-25 18:57:05 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333333 2008-Apr-25 18:57:05 LOG4 log_alfabeam: ALFABEAM 1 9.709586515514445 21.843951046734361 2008-Apr-25 18:57:05 LOG4 log_alfabeam: ALFABEAM 2 9.715538822330773 21.791626769201986 2008-Apr-25 18:57:05 LOG4 log_alfabeam: ALFABEAM 3 9.722630636800579 21.830547534740099 2008-Apr-25 18:57:05 LOG4 log_alfabeam: ALFABEAM 4 9.723745148976400 21.922899782911404 2008-Apr-25 18:57:05 LOG4 log_alfabeam: ALFABEAM 5 9.717751532410706 21.975345209700318 2008-Apr-25 18:57:05 LOG4 log_alfabeam: ALFABEAM 6 9.710684964946429 21.935318062099324 2008-Apr-25 18:57:05 INFO2 take_spectra: Starting WAPP+GALFA scan: 811600096 2008-Apr-25 18:57:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-25 18:57:06 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-25 18:57:06 LOG5 begin_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2008-Apr-25 18:57:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 18:57:06 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Apr-25 18:57:06 INFO5 check_wapp_levels: WAPP power levels are between 1.204 and 1.524 (still bad) 2008-Apr-25 18:57:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 18:57:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:57:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:57:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82627.00 2008-Apr-25 18:57:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 18:57:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:57:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:57:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 18:57:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:57:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:57:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:57:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:57:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:57:08 INFO5 check_wapp_levels: WAPP power levels are between 1.186 and 1.482 (still bad) 2008-Apr-25 18:57:10 INFO5 check_wapp_levels: WAPP power levels are between 1.186 and 1.477 (still bad) 2008-Apr-25 18:57:12 INFO5 check_wapp_levels: WAPP power levels are between 1.185 and 1.476 (still bad) 2008-Apr-25 18:57:14 INFO5 check_wapp_levels: WAPP power levels are between 1.186 and 1.477 (still bad) 2008-Apr-25 18:57:16 INFO5 check_wapp_levels: WAPP power levels are between 1.186 and 1.476 (still bad) 2008-Apr-25 18:57:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 18:57:17 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-25 18:57:17 LOG5 end_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2008-Apr-25 18:57:17 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-25 18:57:17 LOG5 end_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2008-Apr-25 18:57:17 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2008-Apr-25 18:57:17 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2008-Apr-25 18:57:17 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2008-Apr-25 18:57:17 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-25 18:57:17 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.31975 J 2008-Apr-25 18:57:17 LOG2 antvel: Computed apparent RA = 09:43:29.3 Dec = +21:50:44.2 2008-Apr-25 18:57:17 LOG2 antvel: Parameters to Doppler: Topocentric 82637 2008 116 0.0 2008-Apr-25 18:57:17 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-25 18:57:17 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2008-Apr-25 18:57:17 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2008-Apr-25 18:57:17 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-25 18:57:17 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-25 18:57:17 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Apr-25 18:57:17 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 18:57:17 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-25 18:57:17 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-25 18:57:17 LOG5 begin_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2008-Apr-25 18:57:17 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-25 18:57:17 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.792525 2008.3197529913555 18.999933 2008-Apr-25 18:57:17 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666663 21.883333333333340 2008-Apr-25 18:57:17 LOG4 log_alfabeam: ALFABEAM 1 9.709589468970131 21.843848490734057 2008-Apr-25 18:57:17 LOG4 log_alfabeam: ALFABEAM 2 9.715545628752619 21.791610946501326 2008-Apr-25 18:57:17 LOG4 log_alfabeam: ALFABEAM 3 9.722634574460884 21.830633031030231 2008-Apr-25 18:57:17 LOG4 log_alfabeam: ALFABEAM 4 9.723742165660139 21.923003191466812 2008-Apr-25 18:57:17 LOG4 log_alfabeam: ALFABEAM 5 9.717744539817756 21.975361472146187 2008-Apr-25 18:57:17 LOG4 log_alfabeam: ALFABEAM 6 9.710681041999685 21.935229690206498 2008-Apr-25 18:57:17 INFO2 take_spectra: Starting WAPP+GALFA scan: 811600097 2008-Apr-25 18:57:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-25 18:57:18 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-25 18:57:18 LOG5 begin_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2008-Apr-25 18:57:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 18:57:18 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Apr-25 18:57:18 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 18:57:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:57:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:57:18 INFO5 check_wapp_levels: WAPP power levels are between 1.188 and 1.475 (still bad) 2008-Apr-25 18:57:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82639.00 2008-Apr-25 18:57:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 18:57:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:57:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:57:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 18:57:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:57:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:57:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:57:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:57:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:57:20 INFO5 check_wapp_levels: WAPP power levels are between 1.185 and 1.473 (still bad) 2008-Apr-25 18:57:22 INFO5 check_wapp_levels: WAPP power levels are between 1.189 and 1.475 (still bad) 2008-Apr-25 18:57:24 INFO5 check_wapp_levels: WAPP power levels are between 1.187 and 1.472 (still bad) 2008-Apr-25 18:57:26 INFO5 check_wapp_levels: WAPP power levels are between 1.187 and 1.473 (still bad) 2008-Apr-25 18:57:28 INFO5 check_wapp_levels: WAPP power levels are between 1.186 and 1.473 (still bad) 2008-Apr-25 18:57:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 18:57:29 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-25 18:57:29 LOG5 end_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2008-Apr-25 18:57:29 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-25 18:57:29 LOG5 end_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2008-Apr-25 18:57:29 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2008-Apr-25 18:57:29 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2008-Apr-25 18:57:29 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2008-Apr-25 18:57:29 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-25 18:57:29 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.31975 J 2008-Apr-25 18:57:29 LOG2 antvel: Computed apparent RA = 09:43:29.3 Dec = +21:50:44.2 2008-Apr-25 18:57:29 LOG2 antvel: Parameters to Doppler: Topocentric 82649 2008 116 0.0 2008-Apr-25 18:57:29 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-25 18:57:29 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2008-Apr-25 18:57:29 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2008-Apr-25 18:57:29 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-25 18:57:29 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-25 18:57:29 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Apr-25 18:57:29 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 18:57:29 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-25 18:57:29 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-25 18:57:29 LOG5 begin_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2008-Apr-25 18:57:29 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-25 18:57:29 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.795867 2008.3197533716125 18.999933 2008-Apr-25 18:57:29 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666663 21.883333333333347 2008-Apr-25 18:57:29 LOG4 log_alfabeam: ALFABEAM 1 9.709592446079984 21.843745424847814 2008-Apr-25 18:57:29 LOG4 log_alfabeam: ALFABEAM 2 9.715552473004475 21.791595137506167 2008-Apr-25 18:57:29 LOG4 log_alfabeam: ALFABEAM 3 9.722638526983607 21.830719045175687 2008-Apr-25 18:57:29 LOG4 log_alfabeam: ALFABEAM 4 9.723739158371757 21.923107114363589 2008-Apr-25 18:57:29 LOG4 log_alfabeam: ALFABEAM 5 9.717737508169510 21.975377718964609 2008-Apr-25 18:57:29 LOG4 log_alfabeam: ALFABEAM 6 9.710677104669900 21.935140782750111 2008-Apr-25 18:57:29 INFO2 take_spectra: Starting WAPP+GALFA scan: 811600098 2008-Apr-25 18:57:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-25 18:57:30 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-25 18:57:30 LOG5 begin_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2008-Apr-25 18:57:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 18:57:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Apr-25 18:57:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 18:57:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:57:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:57:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82651.00 2008-Apr-25 18:57:31 INFO5 check_wapp_levels: WAPP power levels are between 1.185 and 1.473 (still bad) 2008-Apr-25 18:57:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 18:57:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:57:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:57:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 18:57:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:57:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:57:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:57:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:57:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:57:33 INFO5 check_wapp_levels: WAPP power levels are between 1.181 and 1.471 (still bad) 2008-Apr-25 18:57:35 INFO5 check_wapp_levels: WAPP power levels are between 1.181 and 1.469 (still bad) 2008-Apr-25 18:57:37 INFO5 check_wapp_levels: WAPP power levels are between 1.183 and 1.469 (still bad) 2008-Apr-25 18:57:39 INFO5 check_wapp_levels: WAPP power levels are between 1.181 and 1.469 (still bad) 2008-Apr-25 18:57:41 INFO5 check_wapp_levels: WAPP power levels are between 1.181 and 1.470 (still bad) 2008-Apr-25 18:57:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 18:57:41 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-25 18:57:41 LOG5 end_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2008-Apr-25 18:57:41 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-25 18:57:41 LOG5 end_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2008-Apr-25 18:57:41 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2008-Apr-25 18:57:41 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2008-Apr-25 18:57:41 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2008-Apr-25 18:57:41 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-25 18:57:41 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.31975 J 2008-Apr-25 18:57:41 LOG2 antvel: Computed apparent RA = 09:43:29.3 Dec = +21:50:44.2 2008-Apr-25 18:57:41 LOG2 antvel: Parameters to Doppler: Topocentric 82661 2008 116 0.0 2008-Apr-25 18:57:41 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-25 18:57:41 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2008-Apr-25 18:57:41 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2008-Apr-25 18:57:41 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-25 18:57:41 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-25 18:57:41 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Apr-25 18:57:41 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 18:57:41 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-25 18:57:41 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-25 18:57:41 LOG5 begin_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2008-Apr-25 18:57:41 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-25 18:57:41 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.799209 2008.3197537518695 18.999933 2008-Apr-25 18:57:41 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666670 21.883333333333329 2008-Apr-25 18:57:41 LOG4 log_alfabeam: ALFABEAM 1 9.709595448019709 21.843641813550448 2008-Apr-25 18:57:41 LOG4 log_alfabeam: ALFABEAM 2 9.715559357512415 21.791579338301567 2008-Apr-25 18:57:41 LOG4 log_alfabeam: ALFABEAM 3 9.722642495652716 21.830805608381233 2008-Apr-25 18:57:41 LOG4 log_alfabeam: ALFABEAM 4 9.723736125922363 21.923211587415956 2008-Apr-25 18:57:41 LOG4 log_alfabeam: ALFABEAM 5 9.717730434971781 21.975393954137207 2008-Apr-25 18:57:41 LOG4 log_alfabeam: ALFABEAM 6 9.710673151685988 21.935051307497623 2008-Apr-25 18:57:41 INFO2 take_spectra: Starting WAPP+GALFA scan: 811600099 2008-Apr-25 18:57:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-25 18:57:42 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-25 18:57:42 LOG5 begin_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2008-Apr-25 18:57:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 18:57:42 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Apr-25 18:57:42 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 18:57:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:57:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:57:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82663.00 2008-Apr-25 18:57:43 INFO5 check_wapp_levels: WAPP power levels are between 1.181 and 1.470 (still bad) 2008-Apr-25 18:57:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 18:57:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:57:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:57:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 18:57:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:57:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:57:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:57:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:57:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:57:45 INFO5 check_wapp_levels: WAPP power levels are between 1.185 and 1.471 (still bad) 2008-Apr-25 18:57:47 INFO5 check_wapp_levels: WAPP power levels are between 1.184 and 1.471 (still bad) 2008-Apr-25 18:57:49 INFO5 check_wapp_levels: WAPP power levels are between 1.187 and 1.472 (still bad) 2008-Apr-25 18:57:51 INFO5 check_wapp_levels: WAPP power levels are between 1.184 and 1.469 (still bad) 2008-Apr-25 18:57:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 18:57:53 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-25 18:57:53 LOG5 end_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2008-Apr-25 18:57:53 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-25 18:57:53 LOG5 end_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2008-Apr-25 18:57:53 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2008-Apr-25 18:57:53 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2008-Apr-25 18:57:53 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2008-Apr-25 18:57:53 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-25 18:57:53 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.31975 J 2008-Apr-25 18:57:53 LOG2 antvel: Computed apparent RA = 09:43:29.3 Dec = +21:50:44.2 2008-Apr-25 18:57:53 LOG2 antvel: Parameters to Doppler: Topocentric 82673 2008 116 0.0 2008-Apr-25 18:57:53 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-25 18:57:53 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2008-Apr-25 18:57:53 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2008-Apr-25 18:57:53 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-25 18:57:53 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-25 18:57:53 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Apr-25 18:57:53 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 18:57:53 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-25 18:57:53 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-25 18:57:53 LOG5 begin_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2008-Apr-25 18:57:53 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-25 18:57:53 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.802552 2008.3197541321265 18.999933 2008-Apr-25 18:57:53 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333336 2008-Apr-25 18:57:53 LOG4 log_alfabeam: ALFABEAM 1 9.709598475999270 21.843537620607453 2008-Apr-25 18:57:53 LOG4 log_alfabeam: ALFABEAM 2 9.715566284755775 21.791563545005474 2008-Apr-25 18:57:53 LOG4 log_alfabeam: ALFABEAM 3 9.722646481772102 21.830892752586387 2008-Apr-25 18:57:53 LOG4 log_alfabeam: ALFABEAM 4 9.723733067088331 21.923316647153367 2008-Apr-25 18:57:53 LOG4 log_alfabeam: ALFABEAM 5 9.717723317675439 21.975410181608936 2008-Apr-25 18:57:53 LOG4 log_alfabeam: ALFABEAM 6 9.710669181757659 21.934961231457507 2008-Apr-25 18:57:53 INFO2 take_spectra: Starting WAPP+GALFA scan: 811600100 2008-Apr-25 18:57:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-25 18:57:54 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-25 18:57:54 LOG5 begin_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2008-Apr-25 18:57:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 18:57:54 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Apr-25 18:57:54 INFO5 check_wapp_levels: WAPP power levels are between 1.184 and 1.468 (still bad) 2008-Apr-25 18:57:54 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 18:57:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:57:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:57:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82675.00 2008-Apr-25 18:57:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 18:57:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:57:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:57:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 18:57:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:57:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:57:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:57:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:57:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:57:56 INFO5 check_wapp_levels: WAPP power levels are between 1.184 and 1.468 (still bad) 2008-Apr-25 18:57:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.469 > 1.4)! 2008-Apr-25 18:57:58 LOG4 check_wapp_levels: WAPP-1 power levels: 1.233 1.184 1.205 1.469 2008-Apr-25 18:57:58 LOG4 check_wapp_levels: WAPP-2 power levels: 1.405 1.330 1.366 1.442 2008-Apr-25 18:57:58 LOG4 check_wapp_levels: WAPP-3 power levels: 1.301 1.347 1.421 1.202 2008-Apr-25 18:57:58 LOG4 check_wapp_levels: WAPP-4 power levels: 1.417 1.425 1.236 1.262 2008-Apr-25 18:58:00 INFO5 check_wapp_levels: WAPP power levels are between 1.185 and 1.471 (still bad) 2008-Apr-25 18:58:02 INFO5 check_wapp_levels: WAPP power levels are between 1.186 and 1.470 (still bad) 2008-Apr-25 18:58:04 INFO5 check_wapp_levels: WAPP power levels are between 1.186 and 1.471 (still bad) 2008-Apr-25 18:58:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 18:58:05 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-25 18:58:05 LOG5 end_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2008-Apr-25 18:58:05 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-25 18:58:05 LOG5 end_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2008-Apr-25 18:58:05 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2008-Apr-25 18:58:05 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2008-Apr-25 18:58:05 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2008-Apr-25 18:58:05 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-25 18:58:05 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.31975 J 2008-Apr-25 18:58:05 LOG2 antvel: Computed apparent RA = 09:43:29.3 Dec = +21:50:44.2 2008-Apr-25 18:58:05 LOG2 antvel: Parameters to Doppler: Topocentric 82685 2008 116 0.0 2008-Apr-25 18:58:05 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-25 18:58:05 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2008-Apr-25 18:58:05 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2008-Apr-25 18:58:05 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-25 18:58:05 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-25 18:58:05 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Apr-25 18:58:05 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 18:58:05 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-25 18:58:05 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-25 18:58:05 LOG5 begin_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2008-Apr-25 18:58:05 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-25 18:58:05 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.805894 2008.3197545123837 18.999933 2008-Apr-25 18:58:05 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666660 21.883333333333347 2008-Apr-25 18:58:05 LOG4 log_alfabeam: ALFABEAM 1 9.709601528512255 21.843432903311314 2008-Apr-25 18:58:05 LOG4 log_alfabeam: ALFABEAM 2 9.715573250996496 21.791547767928922 2008-Apr-25 18:58:05 LOG4 log_alfabeam: ALFABEAM 3 9.722650483066772 21.830980431524260 2008-Apr-25 18:58:05 LOG4 log_alfabeam: ALFABEAM 4 9.723729983390097 21.923422235799972 2008-Apr-25 18:58:05 LOG4 log_alfabeam: ALFABEAM 5 9.717716160119334 21.975426390740711 2008-Apr-25 18:58:05 LOG4 log_alfabeam: ALFABEAM 6 9.710665197159104 21.934870602476426 2008-Apr-25 18:58:05 INFO2 take_spectra: Starting WAPP+GALFA scan: 811600101 2008-Apr-25 18:58:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-25 18:58:06 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-25 18:58:06 LOG5 begin_task: Level: (4) ID = <10088> Status = 0 0 0 0 ok 2008-Apr-25 18:58:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 18:58:06 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Apr-25 18:58:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 18:58:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:58:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:58:06 INFO5 check_wapp_levels: WAPP power levels are between 1.185 and 1.472 (still bad) 2008-Apr-25 18:58:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82687.00 2008-Apr-25 18:58:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 18:58:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:58:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:58:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 18:58:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 18:58:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:58:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:58:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:58:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 18:58:08 INFO5 check_wapp_levels: WAPP power levels are between 1.185 and 1.472 (still bad) 2008-Apr-25 18:58:10 INFO5 check_wapp_levels: WAPP power levels are between 1.192 and 1.472 (still bad) 2008-Apr-25 18:58:12 INFO5 check_wapp_levels: WAPP power levels are between 1.188 and 1.473 (still bad) 2008-Apr-25 18:58:14 INFO5 check_wapp_levels: WAPP power levels are between 1.189 and 1.475 (still bad) 2008-Apr-25 18:58:16 INFO5 check_wapp_levels: WAPP power levels are between 1.191 and 1.472 (still bad) 2008-Apr-25 18:58:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 18:58:17 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-25 18:58:17 LOG5 end_task: Level: (4) ID = <10088> Status = 0 0 0 0 ok 2008-Apr-25 18:58:17 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-25 18:58:17 LOG5 end_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2008-Apr-25 18:58:17 INFO2 smartfreq: Switching off CAL 2008-Apr-25 18:58:17 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-25 18:58:17 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-25 18:58:17 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-25 18:58:17 LOG5 begin_task: Level: (3) ID = <10089> Status = 0 0 0 0 ok 2008-Apr-25 18:58:17 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-25 18:58:17 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-25 18:58:17 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-25 18:58:17 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-25 18:58:17 LOG5 end_task: Level: (3) ID = <10089> Status = 0 0 0 0 ok 2008-Apr-25 18:58:17 INFO3 restore_frequencies: Restoring original frequencies 2008-Apr-25 18:58:17 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-25 18:58:17 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.31975 J 2008-Apr-25 18:58:17 LOG2 antvel: Computed apparent RA = 09:43:29.3 Dec = +21:50:44.2 2008-Apr-25 18:58:17 LOG2 antvel: Parameters to Doppler: Topocentric 82697 2008 116 0.0 2008-Apr-25 18:58:17 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-25 18:58:17 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.2 rest0=1381.2 rest1=1381.2 rest2=1381.2 rest3=1381.2 rest4=1381.2 rest5=1381.2 rest6=1381.2 rest7=1381.2 2008-Apr-25 18:58:17 INFO4 dopset_gen: New sky frequencies: 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 2008-Apr-25 18:58:17 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.200000 sky0=1381.200000 sky1=1381.200000 sky2=1381.200000 sky3=1381.200000 sky4=1381.200000 sky5=1381.200000 sky6=1381.200000 sky7=1381.200000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-25 18:58:17 LOG2 dopset_gen: Result from 'sky2syn': 1631.200000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-25 18:58:17 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2008-Apr-25 18:58:17 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 18:58:17 STOP finish_task: Finishing task 'smart frequency switching' 2008-Apr-25 18:58:17 LOG5 finish_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2008-Apr-25 18:58:17 DONE finish_task: DONE finished pattern: smart frequency switching 2008-Apr-25 18:58:17 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-25 18:58:17 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2008-Apr-25 18:58:17 LOG5 end_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2008-Apr-25 18:58:17 NOTE run_command_file: DONE with command file processing 2008-Apr-25 18:58:17 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2008-Apr-25 18:58:17 STOP finish_task: Finishing task 'running command file 'command_galfasrc.cmd'' 2008-Apr-25 18:58:17 LOG5 finish_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Apr-25 18:58:17 DONE finish_task: DONE finished running: command file 'command_galfasrc.cmd' 2008-Apr-25 18:58:18 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-25 18:58:18 END end_task: Finishing task 'running command file 'command_galfasrc.cmd'' with status 'OK' 2008-Apr-25 18:58:18 LOG5 end_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Apr-25 18:58:18 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2008-Apr-25 18:58:18 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 18:58:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:58:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:58:18 INFO5 check_wapp_levels: WAPP power levels are between 1.191 and 1.473 (still bad) 2008-Apr-25 18:58:51 INFO1 CIMA-run_command_file: Transferring command file '080425_obs.cmd ' to executive ... 2008-Apr-25 18:58:51 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 3 {LOAD ages_config.conf} 2008-Apr-25 18:58:51 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 4 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5} 2008-Apr-25 18:58:51 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {FIXEDDRIFT az=245.69 alfaangle=-49.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_001 ra=95300.00 dec=235300.00} 2008-Apr-25 18:58:51 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 11 {FIXEDDRIFT az=235.50 alfaangle=-35.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_003 ra=95300.00 dec=235000.00} 2008-Apr-25 18:58:51 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 15 {FIXEDDRIFT az=208.80 alfaangle=-7.2 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_005 ra=95300.00 dec=234700.00} 2008-Apr-25 18:58:51 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 19 {FIXEDDRIFT az=150.97 alfaangle=45.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_007 ra=95300.00 dec=234400.00} 2008-Apr-25 18:58:51 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 23 {FIXEDDRIFT az=123.75 alfaangle=74.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_009 ra=95300.00 dec=234100.00} 2008-Apr-25 18:58:51 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 27 {FIXEDDRIFT az=113.38 alfaangle=88.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_011 ra=95300.00 dec=233800.00} 2008-Apr-25 18:58:51 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 31 {FIXEDDRIFT az=312.64 alfaangle=59.5 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_059 ra=120900.00 dec=73300.00} 2008-Apr-25 18:58:51 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 35 {FIXEDDRIFT az=332.09 alfaangle=42.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_061 ra=120900.00 dec=73000.00} 2008-Apr-25 18:58:51 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 39 {FIXEDDRIFT az=0.00 alfaangle=19.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_063 ra=120900.00 dec=72700.00} 2008-Apr-25 18:58:51 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 43 {FIXEDDRIFT az=27.70 alfaangle=-3.9 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_065 ra=120900.00 dec=72400.00} 2008-Apr-25 18:58:51 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 47 {FIXEDDRIFT az=46.84 alfaangle=-20.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_067 ra=120900.00 dec=72100.00} 2008-Apr-25 18:58:51 LOG4 exec_msg: From OBSERVER: store_command_file_line 14 51 {FIXEDDRIFT az=47.88 alfaangle=-21.7 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p1_061 ra=122900.00 dec=73000.00} 2008-Apr-25 18:58:51 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-Apr-25 18:58:51 LOG4 exec_msg: From OBSERVER: run_command_file 080425_obs.cmd 1 1 14 2008-Apr-25 18:58:51 LOG4 run_command_file: Calling 'run_command_file 080425_obs.cmd 1 1 14' 2008-Apr-25 18:58:51 BEGIN begin_task: Starting task 'running command file '080425_obs.cmd'' 2008-Apr-25 18:58:51 LOG5 begin_task: Level: (1) ID = <10090> Status = 0 0 0 0 ok 2008-Apr-25 18:58:51 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '080425_obs.cmd' ...} 2008-Apr-25 18:58:51 NOTE run_command_file: Starting execution of command file '080425_obs.cmd' from line 1 2008-Apr-25 18:58:51 COMMAND run_command_line: EXECUTING command 3: 'LOAD ages_config.conf' 2008-Apr-25 18:58:51 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2008-Apr-25 18:58:51 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-25 18:58:51 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2008-Apr-25 18:58:51 NOTE CIMA-load_config_file: Loading configuration file 'ages_config.conf' 2008-Apr-25 18:58:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Apr-25 18:58:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Apr-25 18:58:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Apr-25 18:58:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Apr-25 18:58:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Apr-25 18:58:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2008-Apr-25 18:58:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Apr-25 18:58:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786" 2008-Apr-25 18:58:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786" 2008-Apr-25 18:58:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786" 2008-Apr-25 18:58:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786" 2008-Apr-25 18:58:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786" 2008-Apr-25 18:58:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786" 2008-Apr-25 18:58:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786" 2008-Apr-25 18:58:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786" 2008-Apr-25 18:58:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786" 2008-Apr-25 18:58:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Apr-25 18:58:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Apr-25 18:58:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Apr-25 18:58:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Apr-25 18:58:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Apr-25 18:58:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Apr-25 18:58:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Apr-25 18:58:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Apr-25 18:58:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Apr-25 18:58:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Apr-25 18:58:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Apr-25 18:58:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Apr-25 18:58:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Apr-25 18:58:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2008-Apr-25 18:58:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Apr-25 18:58:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Apr-25 18:58:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Apr-25 18:58:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Apr-25 18:58:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Apr-25 18:58:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Apr-25 18:58:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Apr-25 18:58:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Apr-25 18:58:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Apr-25 18:58:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1670.405752" 2008-Apr-25 18:58:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Apr-25 18:58:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Apr-25 18:58:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Apr-25 18:58:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Apr-25 18:58:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Apr-25 18:58:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Apr-25 18:58:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Apr-25 18:58:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Apr-25 18:58:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Apr-25 18:58:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Apr-25 18:58:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Apr-25 18:58:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Apr-25 18:58:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Apr-25 18:58:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Apr-25 18:58:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Apr-25 18:58:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Apr-25 18:58:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Apr-25 18:58:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Apr-25 18:58:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Apr-25 18:58:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Apr-25 18:58:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Apr-25 18:58:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Apr-25 18:58:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Apr-25 18:58:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Apr-25 18:58:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Apr-25 18:58:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Apr-25 18:58:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Apr-25 18:58:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Apr-25 18:58:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Apr-25 18:58:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Apr-25 18:58:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Apr-25 18:58:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Apr-25 18:58:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Apr-25 18:58:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Apr-25 18:58:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Apr-25 18:58:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Apr-25 18:58:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Apr-25 18:58:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Apr-25 18:58:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Apr-25 18:58:53 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-25 18:58:53 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Apr-25 18:58:53 LOG5 begin_task: Level: (2) ID = <10091> Status = 0 0 0 0 ok 2008-Apr-25 18:58:53 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Apr-25 18:58:53 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Apr-25 18:58:53 LOG1 config_iflo: Receiver ALFA already selected 2008-Apr-25 18:58:53 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 18:58:53 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-25 18:58:53 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 18:58:53 LOG5 begin_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2008-Apr-25 18:58:53 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 18:58:53 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 18:58:53 LOG5 end_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2008-Apr-25 18:58:53 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 18:58:53 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-25 18:58:53 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2008-Apr-25 18:58:53 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2008-Apr-25 18:58:53 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Apr-25 18:58:53 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Apr-25 18:58:53 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2008-Apr-25 18:58:53 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2008-Apr-25 18:58:53 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2008-Apr-25 18:58:53 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1670405752.0} 2008-Apr-25 18:58:53 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2008-Apr-25 18:58:53 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2008-Apr-25 18:58:53 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Apr-25 18:58:53 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Apr-25 18:58:53 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Apr-25 18:58:53 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Apr-25 18:58:53 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Apr-25 18:58:53 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2008-Apr-25 18:58:53 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2008-Apr-25 18:58:53 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2008-Apr-25 18:58:53 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2008-Apr-25 18:58:53 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Apr-25 18:58:53 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2008-Apr-25 18:58:53 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2008-Apr-25 18:58:53 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Apr-25 18:58:53 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 18:58:53 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2008-Apr-25 18:58:53 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2008-Apr-25 18:58:53 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Apr-25 18:58:53 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2008-Apr-25 18:58:53 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2008-Apr-25 18:58:53 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Apr-25 18:58:54 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 18:58:54 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Apr-25 18:58:54 LOG5 begin_task: Level: (3) ID = <10093> Status = 0 0 0 0 ok 2008-Apr-25 18:58:54 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1670405752.0} 2008-Apr-25 18:58:54 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Apr-25 18:58:54 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 18:58:54 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 18:58:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:58:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:58:54 LOG4 got_cormsg: From DATATAKING: vw% DONE 2008-Apr-25 18:58:54 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Apr-25 18:58:54 LOG5 end_task: Level: (3) ID = <10093> Status = 0 0 0 0 ok 2008-Apr-25 18:58:54 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Apr-25 18:58:54 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Apr-25 18:58:54 LOG5 finish_task: Level: (2) ID = <10091> Status = 0 0 0 0 ok 2008-Apr-25 18:58:54 DONE finish_task: DONE finished configuration: IF/LO path 2008-Apr-25 18:58:54 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-25 18:58:54 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Apr-25 18:58:54 LOG5 end_task: Level: (2) ID = <10091> Status = 0 0 0 0 ok 2008-Apr-25 18:58:54 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Apr-25 18:58:54 LOG5 begin_task: Level: (2) ID = <10094> Status = 0 0 0 0 ok 2008-Apr-25 18:58:54 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Apr-25 18:58:54 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Apr-25 18:58:54 START begin_task: Starting task 'selecting calibration port' 2008-Apr-25 18:58:54 LOG5 begin_task: Level: (3) ID = <10095> Status = 0 0 0 0 ok 2008-Apr-25 18:58:54 LOG3 vw_send: To DATATAKING: calport 3 2008-Apr-25 18:58:54 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Apr-25 18:58:54 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 18:58:54 START begin_task: Starting task 'waiting on calport' 2008-Apr-25 18:58:54 LOG5 begin_task: Level: (4) ID = <10096> Status = 0 0 0 0 ok 2008-Apr-25 18:58:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:58:54 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Apr-25 18:58:54 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 18:58:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:58:54 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-25 18:58:54 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Apr-25 18:58:54 LOG5 end_task: Level: (4) ID = <10096> Status = 0 0 0 0 ok 2008-Apr-25 18:58:54 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Apr-25 18:58:54 STOP finish_task: Finishing task 'selecting calibration port' 2008-Apr-25 18:58:54 LOG5 finish_task: Level: (3) ID = <10095> Status = 0 0 0 0 ok 2008-Apr-25 18:58:54 INFO2 finish_task: DONE finished configuring: calibration port 2008-Apr-25 18:58:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 18:58:55 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Apr-25 18:58:55 LOG5 end_task: Level: (3) ID = <10095> Status = 0 0 0 0 ok 2008-Apr-25 18:58:55 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Apr-25 18:58:55 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Apr-25 18:58:55 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Apr-25 18:58:55 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Apr-25 18:58:55 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Apr-25 18:58:55 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Apr-25 18:58:55 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Apr-25 18:58:55 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Apr-25 18:58:55 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 EM, RM 2008-Apr-25 18:58:55 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 EM, RM 2008-Apr-25 18:58:55 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 EM, RM 2008-Apr-25 18:58:55 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 EM, RM 2008-Apr-25 18:58:55 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Apr-25 18:58:55 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Apr-25 18:58:55 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-25 18:58:55 LOG5 begin_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2008-Apr-25 18:58:55 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Apr-25 18:58:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:58:55 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-25 18:58:55 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Apr-25 18:58:55 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-25 18:58:55 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 EM, RM' 2008-Apr-25 18:58:55 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-25 18:58:55 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-25 18:58:55 LOG5 end_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2008-Apr-25 18:58:55 LOG3 sock_errsend: To WAPPDATA: FLUSH 2008-Apr-25 18:58:55 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Apr-25 18:58:55 LOG5 finish_task: Level: (2) ID = <10094> Status = 0 0 0 0 ok 2008-Apr-25 18:58:55 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Apr-25 18:58:55 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-25 18:58:55 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Apr-25 18:58:55 LOG5 end_task: Level: (2) ID = <10094> Status = 0 0 0 0 ok 2008-Apr-25 18:58:55 COMMAND run_command_line: EXECUTING command 4: 'SETUP FIXEDDRIFT calwhen=tracking calsecs=5' 2008-Apr-25 18:58:55 COMMAND run_command_line: EXECUTING command 7: 'FIXEDDRIFT az=245.69 alfaangle=-49.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_001 ra=95300.00 dec=235300.00' 2008-Apr-25 18:58:55 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-25 18:58:55 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Apr-25 18:58:56 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-25 18:58:56 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 245.69 -49.0 hcorcal 5 tracking no first 1 AGES3193_p2_001 95300.00 235300.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-25 18:58:56 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-25 18:58:56 LOG5 begin_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2008-Apr-25 18:58:56 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'galfasrc' 2008-Apr-25 18:58:56 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-25 18:58:56 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p2_001} 2008-Apr-25 18:58:56 INFO3 fixed_driftmap: Sending telescope to Az = 245.69 and ZA = 14.80 2008-Apr-25 18:58:56 LOG3 track_source: Calling 'track_source AGES3193_p2_001 245.69 14.8017344578 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-25 18:58:56 START begin_task: Starting task 'sending tracking commands' 2008-Apr-25 18:58:56 LOG5 begin_task: Level: (3) ID = <10099> Status = 0 0 0 0 ok 2008-Apr-25 18:58:56 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_001} INFO {Slewing to source 'AGES3193_p2_001' ...} 2008-Apr-25 18:58:56 INFO1 track_source: Starting to track AGES3193_p2_001 2008-Apr-25 18:58:56 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_001" 2008-Apr-25 18:58:56 LOG3 vw_send: To DATATAKING: set ra 245.69 2008-Apr-25 18:58:56 LOG3 vw_send: To DATATAKING: set dec 14.8017344578 2008-Apr-25 18:58:56 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-25 18:58:56 LOG3 vw_send: To DATATAKING: pnt tr 245.69 14.8017344578 -CF 2008-Apr-25 18:58:56 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-25 18:58:56 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-25 18:58:56 LOG5 finish_task: Level: (3) ID = <10099> Status = 0 0 0 0 ok 2008-Apr-25 18:58:56 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-25 18:58:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 18:58:56 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-25 18:58:56 LOG5 end_task: Level: (3) ID = <10099> Status = 0 0 0 0 ok 2008-Apr-25 18:58:56 START begin_task: Starting task 'rotate ALFA to -49 degrees' 2008-Apr-25 18:58:56 LOG5 begin_task: Level: (3) ID = <10100> Status = 0 0 0 0 ok 2008-Apr-25 18:58:56 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -49 degrees ...} 2008-Apr-25 18:58:57 INFO2 rotate_alfa: ALFA commanded to -49.0 degrees 2008-Apr-25 18:58:57 LOG3 sock_errsend: To ALFAMOTOR: POSITION -49.0 REPLY 2008-Apr-25 18:58:57 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-25 18:58:57 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-25 18:58:57 LOG5 begin_task: Level: (4) ID = <10101> Status = 0 0 0 0 ok 2008-Apr-25 18:58:57 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_001" 2008-Apr-25 18:58:57 LOG4 got_cormsg: From DATATAKING: set ra 245.69 2008-Apr-25 18:58:57 LOG4 got_cormsg: From DATATAKING: set dec 14.8017344578 2008-Apr-25 18:58:57 LOG4 got_cormsg: From DATATAKING: vw% 245.69 2008-Apr-25 18:58:57 LOG4 got_cormsg: From DATATAKING: vw% 14.8017344578 2008-Apr-25 18:58:57 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:58:57 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-25 18:58:57 LOG4 got_cormsg: From DATATAKING: pnt tr 245.69 14.8017344578 -CF 2008-Apr-25 18:58:57 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-25 18:58:57 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-25 18:58:57 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:59:35 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-25 18:59:35 INFO3 alfa_motor: ALFA rotator in-position -49.00 degrees 2008-Apr-25 18:59:35 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-25 18:59:35 LOG5 end_task: Level: (4) ID = <10101> Status = 0 0 0 0 ok 2008-Apr-25 18:59:35 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-25 18:59:35 STOP finish_task: Finishing task 'rotate ALFA to -49 degrees' 2008-Apr-25 18:59:35 LOG5 finish_task: Level: (3) ID = <10100> Status = 0 0 0 0 ok 2008-Apr-25 18:59:35 INFO2 finish_task: DONE finished configuration: rotating ALFA to -49 degrees 2008-Apr-25 18:59:35 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 18:59:35 STOP end_task: Finishing task 'rotate ALFA to -49 degrees' with status 'OK' 2008-Apr-25 18:59:35 LOG5 end_task: Level: (3) ID = <10100> Status = 0 0 0 0 ok 2008-Apr-25 18:59:35 START begin_task: Starting task 'waiting on telescope' 2008-Apr-25 18:59:35 LOG5 begin_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2008-Apr-25 18:59:35 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-25 18:59:35 LOG3 waittrk: Start waittrk 5 2008-Apr-25 18:59:35 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-25 18:59:35 LOG5 begin_task: Level: (4) ID = <10103> Status = 0 0 0 0 ok 2008-Apr-25 18:59:40 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-25 18:59:40 LOG5 end_task: Level: (4) ID = <10103> Status = 0 0 0 0 ok 2008-Apr-25 18:59:40 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-25 18:59:40 LOG5 begin_task: Level: (4) ID = <10104> Status = 0 0 0 0 ok 2008-Apr-25 18:59:45 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-25 18:59:45 LOG5 end_task: Level: (4) ID = <10104> Status = 0 0 0 0 ok 2008-Apr-25 18:59:45 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-25 18:59:45 INFO2 waittrk: Now tracking AGES3193_p2_001 2008-Apr-25 18:59:45 LOG4 waittrk: Current telescope position: Az = 245.25 ZA = 14.82 2008-Apr-25 18:59:45 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-25 18:59:45 LOG5 finish_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2008-Apr-25 18:59:45 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-25 18:59:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 18:59:45 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-25 18:59:45 LOG5 end_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2008-Apr-25 18:59:46 START begin_task: Starting task 'selecting calibration type' 2008-Apr-25 18:59:46 LOG5 begin_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2008-Apr-25 18:59:46 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-25 18:59:46 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-25 18:59:46 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 18:59:46 START begin_task: Starting task 'waiting on setcal' 2008-Apr-25 18:59:46 LOG5 begin_task: Level: (4) ID = <10106> Status = 0 0 0 0 ok 2008-Apr-25 18:59:46 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-25 18:59:46 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 18:59:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:59:46 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-25 18:59:46 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-25 18:59:46 LOG5 end_task: Level: (4) ID = <10106> Status = 0 0 0 0 ok 2008-Apr-25 18:59:46 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-25 18:59:46 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 18:59:46 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-25 18:59:46 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 18:59:46 LOG5 begin_task: Level: (4) ID = <10107> Status = 0 0 0 0 ok 2008-Apr-25 18:59:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 18:59:46 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 18:59:46 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 18:59:46 LOG5 end_task: Level: (4) ID = <10107> Status = 0 0 0 0 ok 2008-Apr-25 18:59:46 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 18:59:46 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-25 18:59:46 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 18:59:46 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-25 18:59:46 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 18:59:46 LOG5 begin_task: Level: (4) ID = <10108> Status = 0 0 0 0 ok 2008-Apr-25 18:59:46 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 18:59:46 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 18:59:46 LOG5 end_task: Level: (4) ID = <10108> Status = 0 0 0 0 ok 2008-Apr-25 18:59:46 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 18:59:46 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-25 18:59:46 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-25 18:59:46 LOG5 finish_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2008-Apr-25 18:59:46 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-25 18:59:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 18:59:46 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-25 18:59:46 LOG5 end_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2008-Apr-25 18:59:46 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2008-Apr-25 18:59:46 INFO2 astwait: Waiting for 207 seconds from 22:59:46 to 23:03:13 UTC ... 2008-Apr-25 18:59:46 LOG4 send_obs_status: To obs_status: <1> TASKTIME 207 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-25 18:59:46 START begin_task: Starting task 'waiting on waiting for AST time' 2008-Apr-25 18:59:46 LOG5 begin_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2008-Apr-25 19:03:13 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2008-Apr-25 19:03:13 LOG5 end_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2008-Apr-25 19:03:13 INFO3 astwait: Finished waiting 2008-Apr-25 19:03:13 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-25 19:03:13 LOG5 dopset_later: Calling 'dopset_later 60.942143239398163' 2008-Apr-25 19:03:13 INFO3 dopset_later: Setting Doppler correction for 19:04:13 (60.9 seconds from now) 2008-Apr-25 19:03:13 LOG5 antvel: Calling 'antvel 245.690000 14.801734 F 60.942143239398163' 2008-Apr-25 19:03:13 LOG2 antvel: Parameters to Doppler: Heliocentric 83053 2008 116 0.0 2008-Apr-25 19:03:13 INFO5 antvel: Computed antenna velocity: +27.70975 km/s 2008-Apr-25 19:03:13 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=27.7097543788 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-25 19:03:13 INFO4 dopset_gen: New sky frequencies: 1381.115772 1381.115772 1381.115772 1381.115772 1381.115772 1381.115772 1381.115772 1381.115772 1381.115772 2008-Apr-25 19:03:13 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.115772 sky0=1381.115772 sky1=1381.115772 sky2=1381.115772 sky3=1381.115772 sky4=1381.115772 sky5=1381.115772 sky6=1381.115772 sky7=1381.115772 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-25 19:03:13 LOG2 dopset_gen: Result from 'sky2syn': 1631.115772 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-25 19:03:13 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631115772.0} 2008-Apr-25 19:03:13 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 19:03:13 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-25 19:03:13 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-25 19:03:13 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:03.1 Dec = +23:53:02.0 2008-Apr-25 19:03:13 LOG3 track_source: Calling 'track_source AGES3193_p2_001 095203.1 235302.0 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-25 19:03:13 START begin_task: Starting task 'sending tracking commands' 2008-Apr-25 19:03:13 LOG5 begin_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2008-Apr-25 19:03:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_001} INFO {Slewing to source 'AGES3193_p2_001' ...} 2008-Apr-25 19:03:13 INFO1 track_source: Starting to track AGES3193_p2_001 2008-Apr-25 19:03:13 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_001" 2008-Apr-25 19:03:13 LOG3 vw_send: To DATATAKING: set ra 095203.1 2008-Apr-25 19:03:13 LOG3 vw_send: To DATATAKING: set dec 235302.0 2008-Apr-25 19:03:13 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-25 19:03:13 LOG3 vw_send: To DATATAKING: pnt tr 095203.1 235302.0 -CJ 2008-Apr-25 19:03:13 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-25 19:03:13 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-25 19:03:13 LOG5 finish_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2008-Apr-25 19:03:13 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-25 19:03:13 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 19:03:13 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-25 19:03:13 LOG5 end_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2008-Apr-25 19:03:13 START begin_task: Starting task 'waiting on telescope' 2008-Apr-25 19:03:13 LOG5 begin_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2008-Apr-25 19:03:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-25 19:03:13 LOG3 waittrk: Start waittrk 5 2008-Apr-25 19:03:13 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-25 19:03:13 LOG5 begin_task: Level: (4) ID = <10112> Status = 0 0 0 0 ok 2008-Apr-25 19:03:13 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631115772.0} 2008-Apr-25 19:03:13 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 19:03:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 19:03:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 19:03:13 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_001" 2008-Apr-25 19:03:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 19:03:13 LOG4 got_cormsg: From DATATAKING: set ra 095203.1 2008-Apr-25 19:03:13 LOG4 got_cormsg: From DATATAKING: set dec 235302.0 2008-Apr-25 19:03:13 LOG4 got_cormsg: From DATATAKING: 095203.1 2008-Apr-25 19:03:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 19:03:13 LOG4 got_cormsg: From DATATAKING: 235302.0 2008-Apr-25 19:03:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 19:03:13 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-25 19:03:13 LOG4 got_cormsg: From DATATAKING: pnt tr 095203.1 235302.0 -CJ 2008-Apr-25 19:03:13 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-25 19:03:13 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-25 19:03:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 19:03:18 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-25 19:03:18 LOG5 end_task: Level: (4) ID = <10112> Status = 0 0 0 0 ok 2008-Apr-25 19:03:18 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-25 19:03:18 LOG5 begin_task: Level: (4) ID = <10113> Status = 0 0 0 0 ok 2008-Apr-25 19:03:20 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-25 19:03:20 LOG5 end_task: Level: (4) ID = <10113> Status = 0 0 0 0 ok 2008-Apr-25 19:03:20 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-25 19:03:20 INFO2 waittrk: Now tracking AGES3193_p2_001 2008-Apr-25 19:03:20 LOG4 waittrk: Current telescope position: Az = 245.22 ZA = 14.80 2008-Apr-25 19:03:20 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-25 19:03:20 LOG5 finish_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2008-Apr-25 19:03:20 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-25 19:03:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 19:03:20 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-25 19:03:20 LOG5 end_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2008-Apr-25 19:03:20 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-25 19:03:20 LOG5 begin_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2008-Apr-25 19:03:20 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-25 19:03:20 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-25 19:03:20 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-25 19:03:20 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-25 19:03:20 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 19:03:20 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-25 19:03:20 LOG5 begin_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2008-Apr-25 19:03:21 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-25 19:03:21 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 19:03:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 19:03:24 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-25 19:03:24 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-25 19:03:24 LOG5 end_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2008-Apr-25 19:03:24 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-25 19:03:24 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-25 19:03:24 LOG5 begin_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2008-Apr-25 19:03:24 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-25 19:03:24 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-25 19:03:24 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-25 19:03:24 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-25 19:03:24 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-25 19:03:24 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-25 19:03:24 LOG5 begin_task: Level: (5) ID = <10117> Status = 0 0 0 0 ok 2008-Apr-25 19:03:24 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-25 19:03:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 19:03:24 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 1 dB --- beam 1: 8 6 dB 2008-Apr-25 19:03:24 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-25 19:03:24 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 3 3 dB 2008-Apr-25 19:03:24 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 6 dB 2008-Apr-25 19:03:24 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-25 19:03:24 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-25 19:03:24 LOG5 end_task: Level: (5) ID = <10117> Status = 0 0 0 0 ok 2008-Apr-25 19:03:24 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.947 0.942 ALFA beam 1: 0.895 1.034 2008-Apr-25 19:03:24 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.059 0.950 ALFA beam 3: 1.024 1.068 2008-Apr-25 19:03:24 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.952 0.983 ALFA beam 5: 1.088 0.938 2008-Apr-25 19:03:24 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.076 1.039 ALFA beam 7: 0.940 0.920 2008-Apr-25 19:03:24 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-25 19:03:24 LOG5 finish_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2008-Apr-25 19:03:24 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-25 19:03:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 19:03:24 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-25 19:03:24 LOG5 end_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2008-Apr-25 19:03:24 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-25 19:03:24 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-25 19:03:24 LOG5 finish_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2008-Apr-25 19:03:24 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-25 19:03:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 19:03:24 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-25 19:03:24 LOG5 end_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2008-Apr-25 19:03:24 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 EM, RM 2008-Apr-25 19:03:24 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 EM, RM 2008-Apr-25 19:03:24 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 EM, RM 2008-Apr-25 19:03:24 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 EM, RM 2008-Apr-25 19:03:24 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-25 19:03:24 START begin_task: Starting task 'WAPP calibration' 2008-Apr-25 19:03:24 LOG5 begin_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2008-Apr-25 19:03:25 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-25 19:03:25 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-25 19:03:25 START begin_task: Starting task 'selecting calibration type' 2008-Apr-25 19:03:25 LOG5 begin_task: Level: (4) ID = <10119> Status = 0 0 0 0 ok 2008-Apr-25 19:03:25 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-25 19:03:25 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-25 19:03:25 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 19:03:25 START begin_task: Starting task 'waiting on setcal' 2008-Apr-25 19:03:25 LOG5 begin_task: Level: (5) ID = <10120> Status = 0 0 0 0 ok 2008-Apr-25 19:03:25 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 EM, RM' 2008-Apr-25 19:03:25 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-25 19:03:25 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 19:03:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 19:03:25 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-25 19:03:25 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-25 19:03:25 LOG5 end_task: Level: (5) ID = <10120> Status = 0 0 0 0 ok 2008-Apr-25 19:03:25 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-25 19:03:25 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 19:03:25 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-25 19:03:25 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 19:03:25 LOG5 begin_task: Level: (5) ID = <10121> Status = 0 0 0 0 ok 2008-Apr-25 19:03:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 19:03:25 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 19:03:25 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 19:03:25 LOG5 end_task: Level: (5) ID = <10121> Status = 0 0 0 0 ok 2008-Apr-25 19:03:25 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 19:03:25 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-25 19:03:25 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 19:03:25 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-25 19:03:25 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 19:03:25 LOG5 begin_task: Level: (5) ID = <10122> Status = 0 0 0 0 ok 2008-Apr-25 19:03:25 NOTE WAPPDATA-new_file: New FITS file: wapp.20080425.a2048.0001.fits 2008-Apr-25 19:03:25 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 19:03:25 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 19:03:25 LOG5 end_task: Level: (5) ID = <10122> Status = 0 0 0 0 ok 2008-Apr-25 19:03:25 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 19:03:25 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-25 19:03:25 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-25 19:03:25 LOG5 finish_task: Level: (4) ID = <10119> Status = 0 0 0 0 ok 2008-Apr-25 19:03:25 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-25 19:03:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 19:03:25 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-25 19:03:25 LOG5 end_task: Level: (4) ID = <10119> Status = 0 0 0 0 ok 2008-Apr-25 19:03:25 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-25 19:03:25 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-25 19:03:25 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-25 19:03:25 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-25 19:03:25 LOG5 begin_task: Level: (4) ID = <10123> Status = 0 0 0 0 ok 2008-Apr-25 19:03:25 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080425.a2048.0001.fits} 2008-Apr-25 19:03:25 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-25 19:03:25 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-25 19:03:25 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-25 19:03:25 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-25 19:03:25 LOG5 end_task: Level: (4) ID = <10123> Status = 0 0 0 0 ok 2008-Apr-25 19:03:25 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-25 19:03:25 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-25 19:03:25 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-25 19:03:25 LOG5 begin_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2008-Apr-25 19:03:25 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-25 19:03:25 LOG5 log_alfabeam: Parameters: 9.867527777777779 23.883888888888887 8.895027 2008.3197646525718 -49.000008 2008-Apr-25 19:03:25 LOG4 log_alfabeam: ALFABEAM 0 9.867527777777775 23.883888888888894 2008-Apr-25 19:03:25 LOG4 log_alfabeam: ALFABEAM 1 9.868239844368446 23.792462870815648 2008-Apr-25 19:03:25 LOG4 log_alfabeam: ALFABEAM 2 9.874501024696460 23.853122855261212 2008-Apr-25 19:03:25 LOG4 log_alfabeam: ALFABEAM 3 9.873765705042334 23.945102638299552 2008-Apr-25 19:03:25 LOG4 log_alfabeam: ALFABEAM 4 9.866772176410267 23.975368623859620 2008-Apr-25 19:03:25 LOG4 log_alfabeam: ALFABEAM 5 9.860550067385974 23.913902111212913 2008-Apr-25 19:03:25 LOG4 log_alfabeam: ALFABEAM 6 9.861282235996432 23.822975053565774 2008-Apr-25 19:03:25 INFO2 take_spectra: Starting WAPP scan: 811600102 2008-Apr-25 19:03:26 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-25 19:03:26 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-25 19:03:26 LOG5 begin_task: Level: (5) ID = <10125> Status = 0 0 0 0 ok 2008-Apr-25 19:03:26 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 19:03:26 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83007.00 2008-Apr-25 19:03:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.115772 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 19:03:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.115772 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 19:03:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.115772 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 19:03:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.115772 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 19:03:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.115772 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 19:03:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.115772 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 19:03:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.115772 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 19:03:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.115772 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 19:03:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.115772 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 19:03:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (499999966 != 499999967)! 2008-Apr-25 19:03:32 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 19:03:32 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-25 19:03:32 LOG5 end_task: Level: (5) ID = <10125> Status = 0 0 0 0 ok 2008-Apr-25 19:03:32 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-25 19:03:32 LOG5 end_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2008-Apr-25 19:03:32 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-25 19:03:32 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-25 19:03:32 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-25 19:03:32 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-25 19:03:32 LOG5 begin_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2008-Apr-25 19:03:33 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-25 19:03:33 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-25 19:03:33 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-25 19:03:33 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-25 19:03:33 LOG5 end_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2008-Apr-25 19:03:33 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-25 19:03:33 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-25 19:03:33 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-25 19:03:33 LOG5 begin_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2008-Apr-25 19:03:33 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-25 19:03:33 LOG5 log_alfabeam: Parameters: 9.867527777777779 23.883888888888887 8.896976 2008.3197648743883 -49.000008 2008-Apr-25 19:03:33 LOG4 log_alfabeam: ALFABEAM 0 9.867527777777777 23.883888888888897 2008-Apr-25 19:03:33 LOG4 log_alfabeam: ALFABEAM 1 9.868245034612382 23.792470615435978 2008-Apr-25 19:03:33 LOG4 log_alfabeam: ALFABEAM 2 9.874502783608753 23.853197323792127 2008-Apr-25 19:03:33 LOG4 log_alfabeam: ALFABEAM 3 9.873762187757064 23.945170093365245 2008-Apr-25 19:03:33 LOG4 log_alfabeam: ALFABEAM 4 9.866766899553667 23.975360507396953 2008-Apr-25 19:03:33 LOG4 log_alfabeam: ALFABEAM 5 9.860548352733373 23.913826371968415 2008-Apr-25 19:03:33 LOG4 log_alfabeam: ALFABEAM 6 9.861285711806705 23.822908155443756 2008-Apr-25 19:03:33 INFO2 take_spectra: Starting WAPP scan: 811600103 2008-Apr-25 19:03:33 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-25 19:03:33 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-25 19:03:33 LOG5 begin_task: Level: (5) ID = <10128> Status = 0 0 0 0 ok 2008-Apr-25 19:03:33 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 19:03:33 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83014.00 2008-Apr-25 19:03:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.495 > 1.4)! 2008-Apr-25 19:03:38 LOG4 check_wapp_levels: WAPP-1 power levels: 1.285 1.197 1.203 1.411 2008-Apr-25 19:03:38 LOG4 check_wapp_levels: WAPP-2 power levels: 1.432 1.309 1.403 1.454 2008-Apr-25 19:03:38 LOG4 check_wapp_levels: WAPP-3 power levels: 1.322 1.361 1.495 1.246 2008-Apr-25 19:03:38 LOG4 check_wapp_levels: WAPP-4 power levels: 1.481 1.436 1.296 1.272 2008-Apr-25 19:03:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.115772 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 19:03:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.115772 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 19:03:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.115772 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 19:03:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.115772 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 19:03:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.115772 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 19:03:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.115772 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 19:03:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.115772 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 19:03:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.115772 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 19:03:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.115772 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 19:03:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (499999966 != 499999967)! 2008-Apr-25 19:03:39 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-25 19:03:39 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 19:03:39 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-25 19:03:39 LOG5 end_task: Level: (5) ID = <10128> Status = 0 0 0 0 ok 2008-Apr-25 19:03:39 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-25 19:03:39 LOG5 end_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2008-Apr-25 19:03:39 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-25 19:03:39 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-25 19:03:39 LOG5 finish_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2008-Apr-25 19:03:39 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-25 19:03:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 19:03:39 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-25 19:03:39 LOG5 end_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2008-Apr-25 19:03:40 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-25 19:03:40 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 245.69 and ZA = 14.80 2008-Apr-25 19:03:40 LOG3 track_source: Calling 'track_source AGES3193_p2_001 245.69 14.8017344578 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-25 19:03:40 START begin_task: Starting task 'sending tracking commands' 2008-Apr-25 19:03:40 LOG5 begin_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2008-Apr-25 19:03:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_001} INFO {Slewing to source 'AGES3193_p2_001' ...} 2008-Apr-25 19:03:40 INFO1 track_source: Starting to track AGES3193_p2_001 2008-Apr-25 19:03:40 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_001" 2008-Apr-25 19:03:40 LOG3 vw_send: To DATATAKING: set ra 245.69 2008-Apr-25 19:03:40 LOG3 vw_send: To DATATAKING: set dec 14.8017344578 2008-Apr-25 19:03:40 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-25 19:03:40 LOG3 vw_send: To DATATAKING: pnt tr 245.69 14.8017344578 -CF 2008-Apr-25 19:03:40 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-25 19:03:40 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-25 19:03:40 LOG5 finish_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2008-Apr-25 19:03:40 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-25 19:03:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 19:03:40 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-25 19:03:40 LOG5 end_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2008-Apr-25 19:03:40 LOG1 fixed_driftmap: Parameters: HA = -00:58:59.3 Start = 08:54:30.2 LST = 08:53:56.1 diff = 34.0 secs 2008-Apr-25 19:03:40 INFO2 fixed_driftmap: Waiting 32 seconds for RA 9:53:29 2008-Apr-25 19:03:40 INFO2 lstwait: Waiting for 31.9 secs from LST 08:53:56 to LST 08:54:28 ... 2008-Apr-25 19:03:40 LOG4 send_obs_status: To obs_status: <1> TASKTIME 31.949521428199549 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-25 19:03:40 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-25 19:03:40 LOG5 begin_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2008-Apr-25 19:03:40 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_001" 2008-Apr-25 19:03:40 LOG4 got_cormsg: From DATATAKING: set ra 245.69 2008-Apr-25 19:03:40 LOG4 got_cormsg: From DATATAKING: set dec 14.8017344578 2008-Apr-25 19:03:40 LOG4 got_cormsg: From DATATAKING: vw% 245.69 2008-Apr-25 19:03:40 LOG4 got_cormsg: From DATATAKING: vw% 14.8017344578 2008-Apr-25 19:03:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 19:03:40 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-25 19:03:40 LOG4 got_cormsg: From DATATAKING: pnt tr 245.69 14.8017344578 -CF 2008-Apr-25 19:03:40 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-25 19:03:40 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-25 19:03:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 19:03:44 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.893 and 1.088 2008-Apr-25 19:04:12 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-25 19:04:12 LOG5 end_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2008-Apr-25 19:04:12 LOG4 lstwait: Finished waiting, the gui caused difference: 1.0542047599990667 2008-Apr-25 19:04:12 INFO3 lstwait: Finished waiting 2008-Apr-25 19:04:12 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-25 19:04:12 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-25 19:04:12 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-25 19:04:12 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-25 19:04:12 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-25 19:04:12 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-25 19:04:12 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-25 19:04:12 LOG5 begin_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2008-Apr-25 19:04:12 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-25 19:04:12 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-25 19:04:12 INFO2 take_spectra: Starting WAPP scan: 811600104 2008-Apr-25 19:04:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-25 19:04:12 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-25 19:04:12 LOG5 begin_task: Level: (4) ID = <10132> Status = 0 0 0 0 ok 2008-Apr-25 19:04:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 19:04:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83053.00 2008-Apr-25 19:04:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.115772 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 19:04:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.115772 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 19:04:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.115772 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 19:04:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.115772 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 19:04:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.115772 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 19:04:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.115772 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 19:04:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.115772 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 19:04:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.115772 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 19:04:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.115772 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 19:24:13 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 19:24:13 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-25 19:24:13 LOG5 end_task: Level: (4) ID = <10132> Status = 0 0 0 0 ok 2008-Apr-25 19:24:13 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-25 19:24:13 LOG5 end_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2008-Apr-25 19:24:13 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-25 19:24:13 LOG5 finish_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2008-Apr-25 19:24:13 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-25 19:24:13 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-25 19:24:13 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-25 19:24:13 LOG5 end_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2008-Apr-25 19:24:13 COMMAND run_command_line: EXECUTING command 11: 'FIXEDDRIFT az=235.50 alfaangle=-35.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_003 ra=95300.00 dec=235000.00' 2008-Apr-25 19:24:14 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-25 19:24:14 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-25 19:24:14 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 235.50 -35.6 hcorcal 5 tracking no first 1 AGES3193_p2_003 95300.00 235000.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-25 19:24:14 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-25 19:24:14 LOG5 begin_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2008-Apr-25 19:24:14 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES3193_p2_001' 2008-Apr-25 19:24:14 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-25 19:24:14 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p2_003} 2008-Apr-25 19:24:14 INFO3 fixed_driftmap: Sending telescope to Az = 235.50 and ZA = 10.00 2008-Apr-25 19:24:14 LOG3 track_source: Calling 'track_source AGES3193_p2_003 235.50 10.0007568124 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-25 19:24:14 START begin_task: Starting task 'sending tracking commands' 2008-Apr-25 19:24:14 LOG5 begin_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2008-Apr-25 19:24:14 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_003} INFO {Slewing to source 'AGES3193_p2_003' ...} 2008-Apr-25 19:24:14 INFO1 track_source: Starting to track AGES3193_p2_003 2008-Apr-25 19:24:14 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_003" 2008-Apr-25 19:24:14 LOG3 vw_send: To DATATAKING: set ra 235.50 2008-Apr-25 19:24:14 LOG3 vw_send: To DATATAKING: set dec 10.0007568124 2008-Apr-25 19:24:14 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-25 19:24:14 LOG3 vw_send: To DATATAKING: pnt tr 235.50 10.0007568124 -CF 2008-Apr-25 19:24:14 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-25 19:24:14 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-25 19:24:14 LOG5 finish_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2008-Apr-25 19:24:14 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-25 19:24:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 19:24:14 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-25 19:24:14 LOG5 end_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2008-Apr-25 19:24:14 START begin_task: Starting task 'rotate ALFA to -35.6 degrees' 2008-Apr-25 19:24:14 LOG5 begin_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2008-Apr-25 19:24:14 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -35.6 degrees ...} 2008-Apr-25 19:24:14 INFO2 rotate_alfa: ALFA commanded to -35.6 degrees 2008-Apr-25 19:24:14 LOG3 sock_errsend: To ALFAMOTOR: POSITION -35.6 REPLY 2008-Apr-25 19:24:14 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-25 19:24:14 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-25 19:24:14 LOG5 begin_task: Level: (4) ID = <10136> Status = 0 0 0 0 ok 2008-Apr-25 19:24:14 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_003" 2008-Apr-25 19:24:14 LOG4 got_cormsg: From DATATAKING: set ra 235.50 2008-Apr-25 19:24:14 LOG4 got_cormsg: From DATATAKING: set dec 10.0007568124 2008-Apr-25 19:24:14 LOG4 got_cormsg: From DATATAKING: vw% 235.50 2008-Apr-25 19:24:14 LOG4 got_cormsg: From DATATAKING: vw% 10.0007568124 2008-Apr-25 19:24:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 19:24:14 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-25 19:24:14 LOG4 got_cormsg: From DATATAKING: pnt tr 235.50 10.0007568124 -CF 2008-Apr-25 19:24:14 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-25 19:24:14 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-25 19:24:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 19:24:23 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-25 19:24:23 INFO3 alfa_motor: ALFA rotator in-position -35.60 degrees 2008-Apr-25 19:24:23 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-25 19:24:23 LOG5 end_task: Level: (4) ID = <10136> Status = 0 0 0 0 ok 2008-Apr-25 19:24:23 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-25 19:24:23 STOP finish_task: Finishing task 'rotate ALFA to -35.6 degrees' 2008-Apr-25 19:24:23 LOG5 finish_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2008-Apr-25 19:24:23 INFO2 finish_task: DONE finished configuration: rotating ALFA to -35.6 degrees 2008-Apr-25 19:24:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 19:24:23 STOP end_task: Finishing task 'rotate ALFA to -35.6 degrees' with status 'OK' 2008-Apr-25 19:24:23 LOG5 end_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2008-Apr-25 19:24:23 START begin_task: Starting task 'waiting on telescope' 2008-Apr-25 19:24:23 LOG5 begin_task: Level: (3) ID = <10137> Status = 0 0 0 0 ok 2008-Apr-25 19:24:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-25 19:24:23 LOG3 waittrk: Start waittrk 5 2008-Apr-25 19:24:23 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-25 19:24:23 LOG5 begin_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2008-Apr-25 19:24:28 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-25 19:24:28 LOG5 end_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2008-Apr-25 19:24:28 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-25 19:24:28 LOG5 begin_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2008-Apr-25 19:26:20 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-25 19:26:20 LOG5 end_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2008-Apr-25 19:26:20 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-25 19:26:20 INFO2 waittrk: Now tracking AGES3193_p2_003 2008-Apr-25 19:26:20 LOG4 waittrk: Current telescope position: Az = 235.03 ZA = 10.01 2008-Apr-25 19:26:20 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-25 19:26:20 LOG5 finish_task: Level: (3) ID = <10137> Status = 0 0 0 0 ok 2008-Apr-25 19:26:20 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-25 19:26:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 19:26:20 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-25 19:26:20 LOG5 end_task: Level: (3) ID = <10137> Status = 0 0 0 0 ok 2008-Apr-25 19:26:20 START begin_task: Starting task 'selecting calibration type' 2008-Apr-25 19:26:20 LOG5 begin_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2008-Apr-25 19:26:20 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-25 19:26:20 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-25 19:26:20 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 19:26:20 START begin_task: Starting task 'waiting on setcal' 2008-Apr-25 19:26:20 LOG5 begin_task: Level: (4) ID = <10141> Status = 0 0 0 0 ok 2008-Apr-25 19:26:20 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-25 19:26:20 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 19:26:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 19:26:21 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-25 19:26:21 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-25 19:26:21 LOG5 end_task: Level: (4) ID = <10141> Status = 0 0 0 0 ok 2008-Apr-25 19:26:21 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-25 19:26:21 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 19:26:21 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-25 19:26:21 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 19:26:21 LOG5 begin_task: Level: (4) ID = <10142> Status = 0 0 0 0 ok 2008-Apr-25 19:26:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 19:26:21 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 19:26:21 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 19:26:21 LOG5 end_task: Level: (4) ID = <10142> Status = 0 0 0 0 ok 2008-Apr-25 19:26:21 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 19:26:21 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-25 19:26:21 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 19:26:21 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-25 19:26:21 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 19:26:21 LOG5 begin_task: Level: (4) ID = <10143> Status = 0 0 0 0 ok 2008-Apr-25 19:26:21 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 19:26:21 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 19:26:21 LOG5 end_task: Level: (4) ID = <10143> Status = 0 0 0 0 ok 2008-Apr-25 19:26:21 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 19:26:21 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-25 19:26:21 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-25 19:26:21 LOG5 finish_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2008-Apr-25 19:26:21 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-25 19:26:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 19:26:21 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-25 19:26:21 LOG5 end_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2008-Apr-25 19:26:21 LOG5 dopset_later: Calling 'dopset_later 47.704433680011753' 2008-Apr-25 19:26:21 INFO3 dopset_later: Setting Doppler correction for 19:27:09 (47.7 seconds from now) 2008-Apr-25 19:26:21 LOG5 antvel: Calling 'antvel 235.500000 10.000757 F 47.704433680011753' 2008-Apr-25 19:26:21 LOG2 antvel: Parameters to Doppler: Heliocentric 84429 2008 116 0.0 2008-Apr-25 19:26:21 INFO5 antvel: Computed antenna velocity: +27.75314 km/s 2008-Apr-25 19:26:21 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=27.7531443144 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-25 19:26:21 INFO4 dopset_gen: New sky frequencies: 1381.115572 1381.115572 1381.115572 1381.115572 1381.115572 1381.115572 1381.115572 1381.115572 1381.115572 2008-Apr-25 19:26:21 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.115572 sky0=1381.115572 sky1=1381.115572 sky2=1381.115572 sky3=1381.115572 sky4=1381.115572 sky5=1381.115572 sky6=1381.115572 sky7=1381.115572 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-25 19:26:21 LOG2 dopset_gen: Result from 'sky2syn': 1631.115572 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-25 19:26:21 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631115572.0} 2008-Apr-25 19:26:21 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 19:26:21 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-25 19:26:21 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-25 19:26:21 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:16.4 Dec = +23:50:02.0 2008-Apr-25 19:26:21 LOG3 track_source: Calling 'track_source AGES3193_p2_003 095216.4 235002.0 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-25 19:26:21 START begin_task: Starting task 'sending tracking commands' 2008-Apr-25 19:26:21 LOG5 begin_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2008-Apr-25 19:26:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_003} INFO {Slewing to source 'AGES3193_p2_003' ...} 2008-Apr-25 19:26:21 INFO1 track_source: Starting to track AGES3193_p2_003 2008-Apr-25 19:26:21 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_003" 2008-Apr-25 19:26:21 LOG3 vw_send: To DATATAKING: set ra 095216.4 2008-Apr-25 19:26:22 LOG3 vw_send: To DATATAKING: set dec 235002.0 2008-Apr-25 19:26:22 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-25 19:26:22 LOG3 vw_send: To DATATAKING: pnt tr 095216.4 235002.0 -CJ 2008-Apr-25 19:26:22 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-25 19:26:22 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-25 19:26:22 LOG5 finish_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2008-Apr-25 19:26:22 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-25 19:26:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 19:26:22 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-25 19:26:22 LOG5 end_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2008-Apr-25 19:26:22 START begin_task: Starting task 'waiting on telescope' 2008-Apr-25 19:26:22 LOG5 begin_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2008-Apr-25 19:26:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-25 19:26:22 LOG3 waittrk: Start waittrk 5 2008-Apr-25 19:26:22 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-25 19:26:22 LOG5 begin_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2008-Apr-25 19:26:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631115572.0} 2008-Apr-25 19:26:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 19:26:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 19:26:22 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_003" 2008-Apr-25 19:26:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 19:26:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 19:26:22 LOG4 got_cormsg: From DATATAKING: set ra 095216.4 2008-Apr-25 19:26:22 LOG4 got_cormsg: From DATATAKING: set dec 235002.0 2008-Apr-25 19:26:22 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-25 19:26:22 LOG4 got_cormsg: From DATATAKING: pnt tr 095216.4 235002.0 -CJ 2008-Apr-25 19:26:22 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-25 19:26:22 LOG4 got_cormsg: From DATATAKING: 095216.4 2008-Apr-25 19:26:22 LOG4 got_cormsg: From DATATAKING: vw% 235002.0 2008-Apr-25 19:26:22 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2008-Apr-25 19:26:27 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-25 19:26:27 LOG5 end_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2008-Apr-25 19:26:27 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-25 19:26:27 LOG5 begin_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2008-Apr-25 19:26:29 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-25 19:26:29 LOG5 end_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2008-Apr-25 19:26:29 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-25 19:26:29 INFO2 waittrk: Now tracking AGES3193_p2_003 2008-Apr-25 19:26:29 LOG4 waittrk: Current telescope position: Az = 234.98 ZA = 10.00 2008-Apr-25 19:26:29 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-25 19:26:29 LOG5 finish_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2008-Apr-25 19:26:29 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-25 19:26:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 19:26:29 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-25 19:26:29 LOG5 end_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2008-Apr-25 19:26:29 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-25 19:26:29 LOG5 begin_task: Level: (3) ID = <10148> Status = 0 0 0 0 ok 2008-Apr-25 19:26:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-25 19:26:29 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-25 19:26:29 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-25 19:26:29 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-25 19:26:29 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 19:26:29 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-25 19:26:29 LOG5 begin_task: Level: (4) ID = <10149> Status = 0 0 0 0 ok 2008-Apr-25 19:26:29 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-25 19:26:29 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 19:26:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 19:26:29 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-25 19:26:29 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-25 19:26:29 LOG5 end_task: Level: (4) ID = <10149> Status = 0 0 0 0 ok 2008-Apr-25 19:26:29 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-25 19:26:29 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-25 19:26:29 LOG5 begin_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2008-Apr-25 19:26:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-25 19:26:29 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-25 19:26:29 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-25 19:26:29 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-25 19:26:29 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-25 19:26:29 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-25 19:26:29 LOG5 begin_task: Level: (5) ID = <10151> Status = 0 0 0 0 ok 2008-Apr-25 19:26:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 19:26:29 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-25 19:26:30 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 1 dB --- beam 1: 7 6 dB 2008-Apr-25 19:26:30 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-25 19:26:30 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 6 dB 2008-Apr-25 19:26:30 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 3 3 dB 2008-Apr-25 19:26:30 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-25 19:26:30 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-25 19:26:30 LOG5 end_task: Level: (5) ID = <10151> Status = 0 0 0 0 ok 2008-Apr-25 19:26:30 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.899 0.904 ALFA beam 1: 1.104 1.015 2008-Apr-25 19:26:30 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.018 0.904 ALFA beam 3: 0.977 1.017 2008-Apr-25 19:26:30 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.911 0.946 ALFA beam 5: 1.046 0.899 2008-Apr-25 19:26:30 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.043 1.017 ALFA beam 7: 0.914 0.900 2008-Apr-25 19:26:30 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-25 19:26:30 LOG5 finish_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2008-Apr-25 19:26:30 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-25 19:26:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 19:26:30 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-25 19:26:30 LOG5 end_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2008-Apr-25 19:26:30 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-25 19:26:30 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-25 19:26:30 LOG5 finish_task: Level: (3) ID = <10148> Status = 0 0 0 0 ok 2008-Apr-25 19:26:30 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-25 19:26:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 19:26:30 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-25 19:26:30 LOG5 end_task: Level: (3) ID = <10148> Status = 0 0 0 0 ok 2008-Apr-25 19:26:30 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 EM, RM 2008-Apr-25 19:26:30 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 EM, RM 2008-Apr-25 19:26:30 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 EM, RM 2008-Apr-25 19:26:30 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 EM, RM 2008-Apr-25 19:26:30 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-25 19:26:30 START begin_task: Starting task 'WAPP calibration' 2008-Apr-25 19:26:30 LOG5 begin_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2008-Apr-25 19:26:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-25 19:26:30 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-25 19:26:30 START begin_task: Starting task 'selecting calibration type' 2008-Apr-25 19:26:30 LOG5 begin_task: Level: (4) ID = <10153> Status = 0 0 0 0 ok 2008-Apr-25 19:26:30 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-25 19:26:30 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-25 19:26:30 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 19:26:30 START begin_task: Starting task 'waiting on setcal' 2008-Apr-25 19:26:30 LOG5 begin_task: Level: (5) ID = <10154> Status = 0 0 0 0 ok 2008-Apr-25 19:26:30 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 EM, RM' 2008-Apr-25 19:26:30 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-25 19:26:30 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 19:26:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 19:26:31 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-25 19:26:31 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-25 19:26:31 LOG5 end_task: Level: (5) ID = <10154> Status = 0 0 0 0 ok 2008-Apr-25 19:26:31 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-25 19:26:31 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 19:26:31 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-25 19:26:31 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 19:26:31 LOG5 begin_task: Level: (5) ID = <10155> Status = 0 0 0 0 ok 2008-Apr-25 19:26:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 19:26:31 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 19:26:31 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 19:26:31 LOG5 end_task: Level: (5) ID = <10155> Status = 0 0 0 0 ok 2008-Apr-25 19:26:31 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 19:26:31 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-25 19:26:31 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 19:26:31 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-25 19:26:31 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 19:26:31 LOG5 begin_task: Level: (5) ID = <10156> Status = 0 0 0 0 ok 2008-Apr-25 19:26:31 NOTE WAPPDATA-new_file: New FITS file: wapp.20080425.a2048.0002.fits 2008-Apr-25 19:26:31 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 19:26:31 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 19:26:31 LOG5 end_task: Level: (5) ID = <10156> Status = 0 0 0 0 ok 2008-Apr-25 19:26:31 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 19:26:31 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-25 19:26:31 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-25 19:26:31 LOG5 finish_task: Level: (4) ID = <10153> Status = 0 0 0 0 ok 2008-Apr-25 19:26:31 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-25 19:26:31 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 19:26:31 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-25 19:26:31 LOG5 end_task: Level: (4) ID = <10153> Status = 0 0 0 0 ok 2008-Apr-25 19:26:31 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-25 19:26:31 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-25 19:26:31 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-25 19:26:31 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-25 19:26:31 LOG5 begin_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2008-Apr-25 19:26:31 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080425.a2048.0002.fits} 2008-Apr-25 19:26:31 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-25 19:26:31 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-25 19:26:31 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-25 19:26:31 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-25 19:26:31 LOG5 end_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2008-Apr-25 19:26:31 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-25 19:26:31 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-25 19:26:31 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-25 19:26:31 LOG5 begin_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2008-Apr-25 19:26:31 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-25 19:26:31 LOG5 log_alfabeam: Parameters: 9.8712222222222206 23.833888888888886 9.281081 2008.3198085722615 -35.600048 2008-Apr-25 19:26:31 LOG4 log_alfabeam: ALFABEAM 0 9.871222222222219 23.833888888888900 2008-Apr-25 19:26:31 LOG4 log_alfabeam: ALFABEAM 1 9.871603161245714 23.740010187944431 2008-Apr-25 19:26:31 LOG4 log_alfabeam: ALFABEAM 2 9.877904628514845 23.802192577765986 2008-Apr-25 19:26:31 LOG4 log_alfabeam: ALFABEAM 3 9.877488948247297 23.896820345171506 2008-Apr-25 19:26:31 LOG4 log_alfabeam: ALFABEAM 4 9.870770289954805 23.928030849263823 2008-Apr-25 19:26:31 LOG4 log_alfabeam: ALFABEAM 5 9.864537250094440 23.864453282175319 2008-Apr-25 19:26:31 LOG4 log_alfabeam: ALFABEAM 6 9.864953953809589 23.771056717320150 2008-Apr-25 19:26:31 INFO2 take_spectra: Starting WAPP scan: 811600105 2008-Apr-25 19:26:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-25 19:26:32 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-25 19:26:32 LOG5 begin_task: Level: (5) ID = <10159> Status = 0 0 0 0 ok 2008-Apr-25 19:26:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 19:26:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84393.00 2008-Apr-25 19:26:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.115572 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 19:26:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.115572 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 19:26:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.115572 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 19:26:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.115572 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 19:26:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.115572 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 19:26:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.115572 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 19:26:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.115572 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 19:26:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.115572 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 19:26:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.115572 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 19:26:38 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (499999966 != 499999967)! 2008-Apr-25 19:26:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.451 > 1.4)! 2008-Apr-25 19:26:38 LOG4 check_wapp_levels: WAPP-1 power levels: 0.899 0.904 1.104 1.015 2008-Apr-25 19:26:38 LOG4 check_wapp_levels: WAPP-2 power levels: 1.390 1.263 1.357 1.404 2008-Apr-25 19:26:38 LOG4 check_wapp_levels: WAPP-3 power levels: 0.911 0.946 1.046 0.899 2008-Apr-25 19:26:38 LOG4 check_wapp_levels: WAPP-4 power levels: 1.451 1.415 1.269 1.254 2008-Apr-25 19:26:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 19:26:38 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-25 19:26:38 LOG5 end_task: Level: (5) ID = <10159> Status = 0 0 0 0 ok 2008-Apr-25 19:26:38 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-25 19:26:38 LOG5 end_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2008-Apr-25 19:26:38 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-25 19:26:38 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-25 19:26:38 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-25 19:26:38 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-25 19:26:38 LOG5 begin_task: Level: (4) ID = <10160> Status = 0 0 0 0 ok 2008-Apr-25 19:26:39 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-25 19:26:39 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-25 19:26:39 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-25 19:26:39 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-25 19:26:39 LOG5 end_task: Level: (4) ID = <10160> Status = 0 0 0 0 ok 2008-Apr-25 19:26:39 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-25 19:26:39 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-25 19:26:39 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-25 19:26:39 LOG5 begin_task: Level: (4) ID = <10161> Status = 0 0 0 0 ok 2008-Apr-25 19:26:39 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-25 19:26:39 LOG5 log_alfabeam: Parameters: 9.8712222222222206 23.833888888888886 9.283030 2008.319808794078 -35.600048 2008-Apr-25 19:26:39 LOG4 log_alfabeam: ALFABEAM 0 9.871222222222212 23.833888888888886 2008-Apr-25 19:26:39 LOG4 log_alfabeam: ALFABEAM 1 9.871613948198840 23.740018930041547 2008-Apr-25 19:26:39 LOG4 log_alfabeam: ALFABEAM 2 9.877908295679619 23.802337131134021 2008-Apr-25 19:26:39 LOG4 log_alfabeam: ALFABEAM 3 9.877481639511847 23.896957144689118 2008-Apr-25 19:26:39 LOG4 log_alfabeam: ALFABEAM 4 9.870759291994466 23.928021171278676 2008-Apr-25 19:26:39 LOG4 log_alfabeam: ALFABEAM 5 9.864533721669817 23.864306176642753 2008-Apr-25 19:26:39 LOG4 log_alfabeam: ALFABEAM 6 9.864961232683459 23.770920249506350 2008-Apr-25 19:26:39 INFO2 take_spectra: Starting WAPP scan: 811600106 2008-Apr-25 19:26:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-25 19:26:39 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-25 19:26:39 LOG5 begin_task: Level: (5) ID = <10162> Status = 0 0 0 0 ok 2008-Apr-25 19:26:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 19:26:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84400.00 2008-Apr-25 19:26:44 INFO5 check_wapp_levels: WAPP power levels are between 1.164 and 1.505 (still bad) 2008-Apr-25 19:26:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.115572 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 19:26:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.115572 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 19:26:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.115572 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 19:26:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.115572 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 19:26:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.115572 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 19:26:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.115572 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 19:26:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.115572 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 19:26:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.115572 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 19:26:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.115572 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 19:26:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (499999966 != 499999967)! 2008-Apr-25 19:26:45 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-25 19:26:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 19:26:45 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-25 19:26:45 LOG5 end_task: Level: (5) ID = <10162> Status = 0 0 0 0 ok 2008-Apr-25 19:26:45 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-25 19:26:45 LOG5 end_task: Level: (4) ID = <10161> Status = 0 0 0 0 ok 2008-Apr-25 19:26:45 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-25 19:26:45 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-25 19:26:45 LOG5 finish_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2008-Apr-25 19:26:45 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-25 19:26:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 19:26:46 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-25 19:26:46 LOG5 end_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2008-Apr-25 19:26:46 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-25 19:26:46 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 235.50 and ZA = 10.00 2008-Apr-25 19:26:46 LOG3 track_source: Calling 'track_source AGES3193_p2_003 235.50 10.0007568124 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-25 19:26:46 START begin_task: Starting task 'sending tracking commands' 2008-Apr-25 19:26:46 LOG5 begin_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2008-Apr-25 19:26:46 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_003} INFO {Slewing to source 'AGES3193_p2_003' ...} 2008-Apr-25 19:26:46 INFO1 track_source: Starting to track AGES3193_p2_003 2008-Apr-25 19:26:46 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_003" 2008-Apr-25 19:26:46 LOG3 vw_send: To DATATAKING: set ra 235.50 2008-Apr-25 19:26:46 LOG3 vw_send: To DATATAKING: set dec 10.0007568124 2008-Apr-25 19:26:46 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-25 19:26:46 LOG3 vw_send: To DATATAKING: pnt tr 235.50 10.0007568124 -CF 2008-Apr-25 19:26:46 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-25 19:26:46 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-25 19:26:46 LOG5 finish_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2008-Apr-25 19:26:46 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-25 19:26:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 19:26:46 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-25 19:26:46 LOG5 end_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2008-Apr-25 19:26:46 LOG1 fixed_driftmap: Parameters: HA = -00:35:59.7 Start = 09:17:29.7 LST = 09:17:05.9 diff = 23.8 secs 2008-Apr-25 19:26:46 INFO2 fixed_driftmap: Waiting 21.8 seconds for RA 9:53:29 2008-Apr-25 19:26:46 INFO2 lstwait: Waiting for 21.7 secs from LST 09:17:06 to LST 09:17:28 ... 2008-Apr-25 19:26:46 LOG4 send_obs_status: To obs_status: <1> TASKTIME 21.709604286414447 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-25 19:26:46 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-25 19:26:46 LOG5 begin_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2008-Apr-25 19:26:46 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_003" 2008-Apr-25 19:26:46 LOG4 got_cormsg: From DATATAKING: set ra 235.50 2008-Apr-25 19:26:46 LOG4 got_cormsg: From DATATAKING: set dec 10.0007568124 2008-Apr-25 19:26:46 LOG4 got_cormsg: From DATATAKING: vw% 235.50 2008-Apr-25 19:26:46 LOG4 got_cormsg: From DATATAKING: vw% 10.0007568124 2008-Apr-25 19:26:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 19:26:46 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-25 19:26:46 LOG4 got_cormsg: From DATATAKING: pnt tr 235.50 10.0007568124 -CF 2008-Apr-25 19:26:46 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-25 19:26:46 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-25 19:26:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 19:26:50 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.898 and 1.108 2008-Apr-25 19:27:08 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-25 19:27:08 LOG5 end_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2008-Apr-25 19:27:08 LOG4 lstwait: Finished waiting, the gui caused difference: 0.291757519999436 2008-Apr-25 19:27:08 INFO3 lstwait: Finished waiting 2008-Apr-25 19:27:08 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-25 19:27:08 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-25 19:27:08 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-25 19:27:08 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-25 19:27:08 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-25 19:27:08 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-25 19:27:08 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-25 19:27:08 LOG5 begin_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2008-Apr-25 19:27:08 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-25 19:27:08 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-25 19:27:08 INFO2 take_spectra: Starting WAPP scan: 811600107 2008-Apr-25 19:27:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-25 19:27:08 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-25 19:27:08 LOG5 begin_task: Level: (4) ID = <10166> Status = 0 0 0 0 ok 2008-Apr-25 19:27:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 19:27:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84429.00 2008-Apr-25 19:27:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.115572 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 19:27:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.115572 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 19:27:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.115572 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 19:27:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.115572 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 19:27:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.115572 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 19:27:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.115572 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 19:27:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.115572 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 19:27:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.115572 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 19:27:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.115572 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 19:27:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Apr-25 19:27:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Apr-25 19:27:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Apr-25 19:27:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Apr-25 19:27:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Apr-25 19:27:13 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Apr-25 19:27:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Apr-25 19:27:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Apr-25 19:27:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Apr-25 19:27:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Apr-25 19:27:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Apr-25 19:27:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Apr-25 19:27:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Apr-25 19:27:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Apr-25 19:47:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 19:47:09 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-25 19:47:09 LOG5 end_task: Level: (4) ID = <10166> Status = 0 0 0 0 ok 2008-Apr-25 19:47:09 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-25 19:47:09 LOG5 end_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2008-Apr-25 19:47:09 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-25 19:47:09 LOG5 finish_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2008-Apr-25 19:47:09 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-25 19:47:09 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-25 19:47:09 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-25 19:47:09 LOG5 end_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2008-Apr-25 19:47:09 COMMAND run_command_line: EXECUTING command 15: 'FIXEDDRIFT az=208.80 alfaangle=-7.2 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_005 ra=95300.00 dec=234700.00' 2008-Apr-25 19:47:10 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-25 19:47:10 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-25 19:47:10 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 208.80 -7.2 hcorcal 5 tracking no first 1 AGES3193_p2_005 95300.00 234700.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-25 19:47:10 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-25 19:47:10 LOG5 begin_task: Level: (2) ID = <10167> Status = 0 0 0 0 ok 2008-Apr-25 19:47:10 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES3193_p2_003' 2008-Apr-25 19:47:10 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-25 19:47:10 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p2_005} 2008-Apr-25 19:47:10 INFO3 fixed_driftmap: Sending telescope to Az = 208.80 and ZA = 6.18 2008-Apr-25 19:47:10 LOG3 track_source: Calling 'track_source AGES3193_p2_005 208.80 6.1849276085 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-25 19:47:10 START begin_task: Starting task 'sending tracking commands' 2008-Apr-25 19:47:10 LOG5 begin_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2008-Apr-25 19:47:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_005} INFO {Slewing to source 'AGES3193_p2_005' ...} 2008-Apr-25 19:47:10 INFO1 track_source: Starting to track AGES3193_p2_005 2008-Apr-25 19:47:10 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_005" 2008-Apr-25 19:47:10 LOG3 vw_send: To DATATAKING: set ra 208.80 2008-Apr-25 19:47:10 LOG3 vw_send: To DATATAKING: set dec 6.1849276085 2008-Apr-25 19:47:10 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-25 19:47:10 LOG3 vw_send: To DATATAKING: pnt tr 208.80 6.1849276085 -CF 2008-Apr-25 19:47:10 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-25 19:47:10 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-25 19:47:10 LOG5 finish_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2008-Apr-25 19:47:10 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-25 19:47:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 19:47:10 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-25 19:47:10 LOG5 end_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2008-Apr-25 19:47:10 START begin_task: Starting task 'rotate ALFA to -7.2 degrees' 2008-Apr-25 19:47:10 LOG5 begin_task: Level: (3) ID = <10169> Status = 0 0 0 0 ok 2008-Apr-25 19:47:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -7.2 degrees ...} 2008-Apr-25 19:47:10 INFO2 rotate_alfa: ALFA commanded to -7.2 degrees 2008-Apr-25 19:47:10 LOG3 sock_errsend: To ALFAMOTOR: POSITION -7.2 REPLY 2008-Apr-25 19:47:10 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-25 19:47:10 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-25 19:47:10 LOG5 begin_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2008-Apr-25 19:47:10 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_005" 2008-Apr-25 19:47:10 LOG4 got_cormsg: From DATATAKING: set ra 208.80 2008-Apr-25 19:47:10 LOG4 got_cormsg: From DATATAKING: set dec 6.1849276085 2008-Apr-25 19:47:10 LOG4 got_cormsg: From DATATAKING: vw% 208.80 2008-Apr-25 19:47:10 LOG4 got_cormsg: From DATATAKING: vw% 6.1849276085 2008-Apr-25 19:47:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 19:47:10 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-25 19:47:10 LOG4 got_cormsg: From DATATAKING: pnt tr 208.80 6.1849276085 -CF 2008-Apr-25 19:47:10 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-25 19:47:10 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-25 19:47:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 19:47:27 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-25 19:47:27 INFO3 alfa_motor: ALFA rotator in-position -7.20 degrees 2008-Apr-25 19:47:27 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-25 19:47:27 LOG5 end_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2008-Apr-25 19:47:27 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-25 19:47:27 STOP finish_task: Finishing task 'rotate ALFA to -7.2 degrees' 2008-Apr-25 19:47:27 LOG5 finish_task: Level: (3) ID = <10169> Status = 0 0 0 0 ok 2008-Apr-25 19:47:27 INFO2 finish_task: DONE finished configuration: rotating ALFA to -7.2 degrees 2008-Apr-25 19:47:27 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 19:47:27 STOP end_task: Finishing task 'rotate ALFA to -7.2 degrees' with status 'OK' 2008-Apr-25 19:47:27 LOG5 end_task: Level: (3) ID = <10169> Status = 0 0 0 0 ok 2008-Apr-25 19:47:27 START begin_task: Starting task 'waiting on telescope' 2008-Apr-25 19:47:27 LOG5 begin_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2008-Apr-25 19:47:27 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-25 19:47:27 LOG3 waittrk: Start waittrk 5 2008-Apr-25 19:47:27 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-25 19:47:27 LOG5 begin_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2008-Apr-25 19:47:32 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-25 19:47:32 LOG5 end_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2008-Apr-25 19:47:32 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-25 19:47:32 LOG5 begin_task: Level: (4) ID = <10173> Status = 0 0 0 0 ok 2008-Apr-25 19:48:51 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-25 19:48:51 LOG5 end_task: Level: (4) ID = <10173> Status = 0 0 0 0 ok 2008-Apr-25 19:48:51 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-25 19:48:51 INFO2 waittrk: Now tracking AGES3193_p2_005 2008-Apr-25 19:48:51 LOG4 waittrk: Current telescope position: Az = 208.42 ZA = 6.21 2008-Apr-25 19:48:51 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-25 19:48:51 LOG5 finish_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2008-Apr-25 19:48:51 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-25 19:48:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 19:48:51 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-25 19:48:51 LOG5 end_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2008-Apr-25 19:48:51 START begin_task: Starting task 'selecting calibration type' 2008-Apr-25 19:48:51 LOG5 begin_task: Level: (3) ID = <10174> Status = 0 0 0 0 ok 2008-Apr-25 19:48:52 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-25 19:48:52 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-25 19:48:52 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 19:48:52 START begin_task: Starting task 'waiting on setcal' 2008-Apr-25 19:48:52 LOG5 begin_task: Level: (4) ID = <10175> Status = 0 0 0 0 ok 2008-Apr-25 19:48:52 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-25 19:48:52 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 19:48:52 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 19:48:52 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-25 19:48:52 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-25 19:48:52 LOG5 end_task: Level: (4) ID = <10175> Status = 0 0 0 0 ok 2008-Apr-25 19:48:52 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-25 19:48:52 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 19:48:52 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-25 19:48:52 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 19:48:52 LOG5 begin_task: Level: (4) ID = <10176> Status = 0 0 0 0 ok 2008-Apr-25 19:48:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 19:48:53 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 19:48:53 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 19:48:53 LOG5 end_task: Level: (4) ID = <10176> Status = 0 0 0 0 ok 2008-Apr-25 19:48:53 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 19:48:53 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-25 19:48:53 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 19:48:53 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-25 19:48:53 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 19:48:53 LOG5 begin_task: Level: (4) ID = <10177> Status = 0 0 0 0 ok 2008-Apr-25 19:48:53 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 19:48:53 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 19:48:53 LOG5 end_task: Level: (4) ID = <10177> Status = 0 0 0 0 ok 2008-Apr-25 19:48:53 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 19:48:53 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-25 19:48:53 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-25 19:48:53 LOG5 finish_task: Level: (3) ID = <10174> Status = 0 0 0 0 ok 2008-Apr-25 19:48:53 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-25 19:48:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 19:48:53 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-25 19:48:53 LOG5 end_task: Level: (3) ID = <10174> Status = 0 0 0 0 ok 2008-Apr-25 19:48:53 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2008-Apr-25 19:48:53 INFO2 astwait: Waiting for 12 seconds from 23:48:53 to 23:49:05 UTC ... 2008-Apr-25 19:48:53 LOG4 send_obs_status: To obs_status: <1> TASKTIME 12 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-25 19:48:53 START begin_task: Starting task 'waiting on waiting for AST time' 2008-Apr-25 19:48:53 LOG5 begin_task: Level: (3) ID = <10178> Status = 0 0 0 0 ok 2008-Apr-25 19:49:05 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2008-Apr-25 19:49:05 LOG5 end_task: Level: (3) ID = <10178> Status = 0 0 0 0 ok 2008-Apr-25 19:49:05 INFO3 astwait: Finished waiting 2008-Apr-25 19:49:05 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-25 19:49:05 LOG5 dopset_later: Calling 'dopset_later 60.507400510865637' 2008-Apr-25 19:49:05 INFO3 dopset_later: Setting Doppler correction for 19:50:05 (60.5 seconds from now) 2008-Apr-25 19:49:05 LOG5 antvel: Calling 'antvel 208.800000 6.184928 F 60.507400510865637' 2008-Apr-25 19:49:05 LOG2 antvel: Parameters to Doppler: Heliocentric 85805 2008 116 0.0 2008-Apr-25 19:49:05 INFO5 antvel: Computed antenna velocity: +27.79723 km/s 2008-Apr-25 19:49:05 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=27.797232276599999 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-25 19:49:05 INFO4 dopset_gen: New sky frequencies: 1381.115369 1381.115369 1381.115369 1381.115369 1381.115369 1381.115369 1381.115369 1381.115369 1381.115369 2008-Apr-25 19:49:05 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.115369 sky0=1381.115369 sky1=1381.115369 sky2=1381.115369 sky3=1381.115369 sky4=1381.115369 sky5=1381.115369 sky6=1381.115369 sky7=1381.115369 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-25 19:49:05 LOG2 dopset_gen: Result from 'sky2syn': 1631.115369 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-25 19:49:05 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631115369.0} 2008-Apr-25 19:49:05 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 19:49:05 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-25 19:49:05 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-25 19:49:05 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:03.6 Dec = +23:47:01.9 2008-Apr-25 19:49:05 LOG3 track_source: Calling 'track_source AGES3193_p2_005 095203.6 234701.9 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-25 19:49:05 START begin_task: Starting task 'sending tracking commands' 2008-Apr-25 19:49:05 LOG5 begin_task: Level: (3) ID = <10179> Status = 0 0 0 0 ok 2008-Apr-25 19:49:05 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_005} INFO {Slewing to source 'AGES3193_p2_005' ...} 2008-Apr-25 19:49:05 INFO1 track_source: Starting to track AGES3193_p2_005 2008-Apr-25 19:49:05 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_005" 2008-Apr-25 19:49:05 LOG3 vw_send: To DATATAKING: set ra 095203.6 2008-Apr-25 19:49:05 LOG3 vw_send: To DATATAKING: set dec 234701.9 2008-Apr-25 19:49:05 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-25 19:49:05 LOG3 vw_send: To DATATAKING: pnt tr 095203.6 234701.9 -CJ 2008-Apr-25 19:49:05 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-25 19:49:05 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-25 19:49:05 LOG5 finish_task: Level: (3) ID = <10179> Status = 0 0 0 0 ok 2008-Apr-25 19:49:05 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-25 19:49:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 19:49:05 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-25 19:49:05 LOG5 end_task: Level: (3) ID = <10179> Status = 0 0 0 0 ok 2008-Apr-25 19:49:05 START begin_task: Starting task 'waiting on telescope' 2008-Apr-25 19:49:05 LOG5 begin_task: Level: (3) ID = <10180> Status = 0 0 0 0 ok 2008-Apr-25 19:49:05 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-25 19:49:05 LOG3 waittrk: Start waittrk 5 2008-Apr-25 19:49:05 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-25 19:49:05 LOG5 begin_task: Level: (4) ID = <10181> Status = 0 0 0 0 ok 2008-Apr-25 19:49:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631115369.0} 2008-Apr-25 19:49:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 19:49:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 19:49:05 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_005" 2008-Apr-25 19:49:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 19:49:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 19:49:05 LOG4 got_cormsg: From DATATAKING: set ra 095203.6 2008-Apr-25 19:49:05 LOG4 got_cormsg: From DATATAKING: set dec 234701.9 2008-Apr-25 19:49:05 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-25 19:49:05 LOG4 got_cormsg: From DATATAKING: pnt tr 095203.6 234701.9 -CJ 2008-Apr-25 19:49:05 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-25 19:49:05 LOG4 got_cormsg: From DATATAKING: 095203.6 2008-Apr-25 19:49:05 LOG4 got_cormsg: From DATATAKING: vw% 234701.9 2008-Apr-25 19:49:05 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2008-Apr-25 19:49:10 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-25 19:49:10 LOG5 end_task: Level: (4) ID = <10181> Status = 0 0 0 0 ok 2008-Apr-25 19:49:10 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-25 19:49:10 LOG5 begin_task: Level: (4) ID = <10182> Status = 0 0 0 0 ok 2008-Apr-25 19:49:12 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-25 19:49:12 LOG5 end_task: Level: (4) ID = <10182> Status = 0 0 0 0 ok 2008-Apr-25 19:49:12 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-25 19:49:12 INFO2 waittrk: Now tracking AGES3193_p2_005 2008-Apr-25 19:49:12 LOG4 waittrk: Current telescope position: Az = 208.28 ZA = 6.20 2008-Apr-25 19:49:12 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-25 19:49:12 LOG5 finish_task: Level: (3) ID = <10180> Status = 0 0 0 0 ok 2008-Apr-25 19:49:12 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-25 19:49:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 19:49:12 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-25 19:49:12 LOG5 end_task: Level: (3) ID = <10180> Status = 0 0 0 0 ok 2008-Apr-25 19:49:12 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-25 19:49:12 LOG5 begin_task: Level: (3) ID = <10183> Status = 0 0 0 0 ok 2008-Apr-25 19:49:12 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-25 19:49:12 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-25 19:49:12 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-25 19:49:12 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-25 19:49:12 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 19:49:12 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-25 19:49:12 LOG5 begin_task: Level: (4) ID = <10184> Status = 0 0 0 0 ok 2008-Apr-25 19:49:12 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-25 19:49:12 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 19:49:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 19:49:13 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-25 19:49:13 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-25 19:49:13 LOG5 end_task: Level: (4) ID = <10184> Status = 0 0 0 0 ok 2008-Apr-25 19:49:13 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-25 19:49:13 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-25 19:49:13 LOG5 begin_task: Level: (4) ID = <10185> Status = 0 0 0 0 ok 2008-Apr-25 19:49:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-25 19:49:13 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-25 19:49:13 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-25 19:49:13 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-25 19:49:13 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-25 19:49:13 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-25 19:49:13 LOG5 begin_task: Level: (5) ID = <10186> Status = 0 0 0 0 ok 2008-Apr-25 19:49:13 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-25 19:49:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 19:49:13 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 1 dB --- beam 1: 7 6 dB 2008-Apr-25 19:49:13 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-25 19:49:13 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 5 dB 2008-Apr-25 19:49:13 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 2 2 dB 2008-Apr-25 19:49:13 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-25 19:49:13 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-25 19:49:13 LOG5 end_task: Level: (5) ID = <10186> Status = 0 0 0 0 ok 2008-Apr-25 19:49:13 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.087 0.900 ALFA beam 1: 1.074 1.003 2008-Apr-25 19:49:13 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.985 0.898 ALFA beam 3: 0.951 1.014 2008-Apr-25 19:49:13 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.911 0.941 ALFA beam 5: 1.000 1.104 2008-Apr-25 19:49:13 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.970 0.977 ALFA beam 7: 1.060 1.078 2008-Apr-25 19:49:13 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-25 19:49:13 LOG5 finish_task: Level: (4) ID = <10185> Status = 0 0 0 0 ok 2008-Apr-25 19:49:13 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-25 19:49:13 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 19:49:13 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-25 19:49:13 LOG5 end_task: Level: (4) ID = <10185> Status = 0 0 0 0 ok 2008-Apr-25 19:49:13 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-25 19:49:13 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-25 19:49:13 LOG5 finish_task: Level: (3) ID = <10183> Status = 0 0 0 0 ok 2008-Apr-25 19:49:13 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-25 19:49:13 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 19:49:13 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-25 19:49:13 LOG5 end_task: Level: (3) ID = <10183> Status = 0 0 0 0 ok 2008-Apr-25 19:49:14 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 EM, RM 2008-Apr-25 19:49:14 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 EM, RM 2008-Apr-25 19:49:14 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 EM, RM 2008-Apr-25 19:49:14 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 EM, RM 2008-Apr-25 19:49:14 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-25 19:49:14 START begin_task: Starting task 'WAPP calibration' 2008-Apr-25 19:49:14 LOG5 begin_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2008-Apr-25 19:49:14 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-25 19:49:14 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-25 19:49:14 START begin_task: Starting task 'selecting calibration type' 2008-Apr-25 19:49:14 LOG5 begin_task: Level: (4) ID = <10188> Status = 0 0 0 0 ok 2008-Apr-25 19:49:14 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-25 19:49:14 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-25 19:49:14 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 19:49:14 START begin_task: Starting task 'waiting on setcal' 2008-Apr-25 19:49:14 LOG5 begin_task: Level: (5) ID = <10189> Status = 0 0 0 0 ok 2008-Apr-25 19:49:14 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 EM, RM' 2008-Apr-25 19:49:14 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-25 19:49:14 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 19:49:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 19:49:14 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-25 19:49:14 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-25 19:49:14 LOG5 end_task: Level: (5) ID = <10189> Status = 0 0 0 0 ok 2008-Apr-25 19:49:14 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-25 19:49:14 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 19:49:14 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-25 19:49:14 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 19:49:14 LOG5 begin_task: Level: (5) ID = <10190> Status = 0 0 0 0 ok 2008-Apr-25 19:49:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 19:49:14 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 19:49:14 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 19:49:14 LOG5 end_task: Level: (5) ID = <10190> Status = 0 0 0 0 ok 2008-Apr-25 19:49:14 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 19:49:14 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-25 19:49:14 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 19:49:14 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-25 19:49:14 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 19:49:14 LOG5 begin_task: Level: (5) ID = <10191> Status = 0 0 0 0 ok 2008-Apr-25 19:49:14 NOTE WAPPDATA-new_file: New FITS file: wapp.20080425.a2048.0003.fits 2008-Apr-25 19:49:14 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 19:49:14 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 19:49:14 LOG5 end_task: Level: (5) ID = <10191> Status = 0 0 0 0 ok 2008-Apr-25 19:49:14 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 19:49:14 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-25 19:49:14 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-25 19:49:14 LOG5 finish_task: Level: (4) ID = <10188> Status = 0 0 0 0 ok 2008-Apr-25 19:49:14 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-25 19:49:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 19:49:14 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-25 19:49:14 LOG5 end_task: Level: (4) ID = <10188> Status = 0 0 0 0 ok 2008-Apr-25 19:49:14 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-25 19:49:14 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-25 19:49:14 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-25 19:49:14 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-25 19:49:14 LOG5 begin_task: Level: (4) ID = <10192> Status = 0 0 0 0 ok 2008-Apr-25 19:49:14 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080425.a2048.0003.fits} 2008-Apr-25 19:49:14 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-25 19:49:14 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-25 19:49:14 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-25 19:49:14 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-25 19:49:14 LOG5 end_task: Level: (4) ID = <10192> Status = 0 0 0 0 ok 2008-Apr-25 19:49:14 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-25 19:49:14 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-25 19:49:14 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-25 19:49:14 LOG5 begin_task: Level: (4) ID = <10193> Status = 0 0 0 0 ok 2008-Apr-25 19:49:14 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-25 19:49:14 LOG5 log_alfabeam: Parameters: 9.8676666666666684 23.783861111111111 9.660728 2008.3198517631251 -7.200107 2008-Apr-25 19:49:14 LOG4 log_alfabeam: ALFABEAM 0 9.867666666666665 23.783861111111118 2008-Apr-25 19:49:14 LOG4 log_alfabeam: ALFABEAM 1 9.868037800717186 23.682840672800520 2008-Apr-25 19:49:14 LOG4 log_alfabeam: ALFABEAM 2 9.873873875994720 23.749817141207110 2008-Apr-25 19:49:14 LOG4 log_alfabeam: ALFABEAM 3 9.873494009686441 23.851310830135247 2008-Apr-25 19:49:14 LOG4 log_alfabeam: ALFABEAM 4 9.867181160495553 23.885204532551636 2008-Apr-25 19:49:14 LOG4 log_alfabeam: ALFABEAM 5 9.861433092721263 23.816502248492043 2008-Apr-25 19:49:14 LOG4 log_alfabeam: ALFABEAM 6 9.861909195963692 23.715629533228306 2008-Apr-25 19:49:14 INFO2 take_spectra: Starting WAPP scan: 811600108 2008-Apr-25 19:49:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-25 19:49:15 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-25 19:49:15 LOG5 begin_task: Level: (5) ID = <10194> Status = 0 0 0 0 ok 2008-Apr-25 19:49:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 19:49:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85756.00 2008-Apr-25 19:49:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.115369 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 19:49:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.115369 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 19:49:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.115369 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 19:49:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.115369 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 19:49:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.115369 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 19:49:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.115369 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 19:49:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.115369 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 19:49:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.115369 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 19:49:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.115369 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 19:49:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (499999966 != 499999967)! 2008-Apr-25 19:49:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (499999966 != 499999967)! 2008-Apr-25 19:49:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 19:49:21 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-25 19:49:21 LOG5 end_task: Level: (5) ID = <10194> Status = 0 0 0 0 ok 2008-Apr-25 19:49:21 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-25 19:49:21 LOG5 end_task: Level: (4) ID = <10193> Status = 0 0 0 0 ok 2008-Apr-25 19:49:21 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-25 19:49:21 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-25 19:49:21 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-25 19:49:21 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-25 19:49:21 LOG5 begin_task: Level: (4) ID = <10195> Status = 0 0 0 0 ok 2008-Apr-25 19:49:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.540 > 1.4)! 2008-Apr-25 19:49:21 LOG4 check_wapp_levels: WAPP-1 power levels: 1.540 1.157 1.471 1.378 2008-Apr-25 19:49:21 LOG4 check_wapp_levels: WAPP-2 power levels: 1.358 1.254 1.331 1.399 2008-Apr-25 19:49:21 LOG4 check_wapp_levels: WAPP-3 power levels: 1.279 1.318 1.398 1.497 2008-Apr-25 19:49:21 LOG4 check_wapp_levels: WAPP-4 power levels: 1.375 1.382 1.503 1.525 2008-Apr-25 19:49:22 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-25 19:49:22 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-25 19:49:22 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-25 19:49:22 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-25 19:49:22 LOG5 end_task: Level: (4) ID = <10195> Status = 0 0 0 0 ok 2008-Apr-25 19:49:22 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-25 19:49:22 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-25 19:49:22 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-25 19:49:22 LOG5 begin_task: Level: (4) ID = <10196> Status = 0 0 0 0 ok 2008-Apr-25 19:49:22 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-25 19:49:22 LOG5 log_alfabeam: Parameters: 9.8676666666666684 23.783861111111111 9.662678 2008.3198519849418 -7.200107 2008-Apr-25 19:49:22 LOG4 log_alfabeam: ALFABEAM 0 9.867666666666652 23.783861111111115 2008-Apr-25 19:49:22 LOG4 log_alfabeam: ALFABEAM 1 9.868066840736878 23.682862027882901 2008-Apr-25 19:49:22 LOG4 log_alfabeam: ALFABEAM 2 9.873883643344634 23.750153853070159 2008-Apr-25 19:49:22 LOG4 log_alfabeam: ALFABEAM 3 9.873474541248497 23.851626726376587 2008-Apr-25 19:49:22 LOG4 log_alfabeam: ALFABEAM 4 9.867151736145329 23.885177634354548 2008-Apr-25 19:49:22 LOG4 log_alfabeam: ALFABEAM 5 9.861423692885825 23.816161192934310 2008-Apr-25 19:49:22 LOG4 log_alfabeam: ALFABEAM 6 9.861929021921247 23.715315865871009 2008-Apr-25 19:49:22 INFO2 take_spectra: Starting WAPP scan: 811600109 2008-Apr-25 19:49:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-25 19:49:22 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-25 19:49:22 LOG5 begin_task: Level: (5) ID = <10197> Status = 0 0 0 0 ok 2008-Apr-25 19:49:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 19:49:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85763.00 2008-Apr-25 19:49:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.115369 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 19:49:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.115369 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 19:49:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.115369 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 19:49:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.115369 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 19:49:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.115369 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 19:49:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.115369 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 19:49:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.115369 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 19:49:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.115369 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 19:49:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.115369 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 19:49:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (499999966 != 499999967)! 2008-Apr-25 19:49:28 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-25 19:49:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 19:49:28 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-25 19:49:28 LOG5 end_task: Level: (5) ID = <10197> Status = 0 0 0 0 ok 2008-Apr-25 19:49:28 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-25 19:49:28 LOG5 end_task: Level: (4) ID = <10196> Status = 0 0 0 0 ok 2008-Apr-25 19:49:28 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-25 19:49:28 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-25 19:49:28 LOG5 finish_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2008-Apr-25 19:49:28 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-25 19:49:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 19:49:28 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-25 19:49:28 LOG5 end_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2008-Apr-25 19:49:29 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-25 19:49:29 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 208.80 and ZA = 6.18 2008-Apr-25 19:49:29 LOG3 track_source: Calling 'track_source AGES3193_p2_005 208.80 6.1849276085 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-25 19:49:29 START begin_task: Starting task 'sending tracking commands' 2008-Apr-25 19:49:29 LOG5 begin_task: Level: (3) ID = <10198> Status = 0 0 0 0 ok 2008-Apr-25 19:49:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_005} INFO {Slewing to source 'AGES3193_p2_005' ...} 2008-Apr-25 19:49:29 INFO1 track_source: Starting to track AGES3193_p2_005 2008-Apr-25 19:49:29 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_005" 2008-Apr-25 19:49:29 LOG3 vw_send: To DATATAKING: set ra 208.80 2008-Apr-25 19:49:29 LOG3 vw_send: To DATATAKING: set dec 6.1849276085 2008-Apr-25 19:49:29 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-25 19:49:29 LOG3 vw_send: To DATATAKING: pnt tr 208.80 6.1849276085 -CF 2008-Apr-25 19:49:29 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-25 19:49:29 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-25 19:49:29 LOG5 finish_task: Level: (3) ID = <10198> Status = 0 0 0 0 ok 2008-Apr-25 19:49:29 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-25 19:49:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 19:49:29 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-25 19:49:29 LOG5 end_task: Level: (3) ID = <10198> Status = 0 0 0 0 ok 2008-Apr-25 19:49:29 LOG1 fixed_driftmap: Parameters: HA = -00:13:00.1 Start = 09:40:29.3 LST = 09:39:52.7 diff = 36.6 secs 2008-Apr-25 19:49:29 INFO2 fixed_driftmap: Waiting 34.6 seconds for RA 9:53:29 2008-Apr-25 19:49:29 INFO2 lstwait: Waiting for 34.5 secs from LST 09:39:53 to LST 09:40:27 ... 2008-Apr-25 19:49:29 LOG4 send_obs_status: To obs_status: <1> TASKTIME 34.512571117261949 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-25 19:49:29 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-25 19:49:29 LOG5 begin_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2008-Apr-25 19:49:29 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.898 and 1.108 2008-Apr-25 19:49:29 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_005" 2008-Apr-25 19:49:29 LOG4 got_cormsg: From DATATAKING: set ra 208.80 2008-Apr-25 19:49:29 LOG4 got_cormsg: From DATATAKING: set dec 6.1849276085 2008-Apr-25 19:49:29 LOG4 got_cormsg: From DATATAKING: vw% 208.80 2008-Apr-25 19:49:29 LOG4 got_cormsg: From DATATAKING: vw% 6.1849276085 2008-Apr-25 19:49:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 19:49:29 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-25 19:49:29 LOG4 got_cormsg: From DATATAKING: pnt tr 208.80 6.1849276085 -CF 2008-Apr-25 19:49:29 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-25 19:49:29 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-25 19:49:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 19:50:03 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-25 19:50:03 LOG5 end_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2008-Apr-25 19:50:03 LOG4 lstwait: Finished waiting, the gui caused difference: 0.48933775999557838 2008-Apr-25 19:50:03 INFO3 lstwait: Finished waiting 2008-Apr-25 19:50:03 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-25 19:50:03 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-25 19:50:03 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-25 19:50:03 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-25 19:50:04 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-25 19:50:04 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-25 19:50:04 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-25 19:50:04 LOG5 begin_task: Level: (3) ID = <10200> Status = 0 0 0 0 ok 2008-Apr-25 19:50:04 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-25 19:50:04 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-25 19:50:04 INFO2 take_spectra: Starting WAPP scan: 811600110 2008-Apr-25 19:50:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-25 19:50:04 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-25 19:50:04 LOG5 begin_task: Level: (4) ID = <10201> Status = 0 0 0 0 ok 2008-Apr-25 19:50:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 19:50:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85805.00 2008-Apr-25 19:50:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.115369 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 19:50:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.115369 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 19:50:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.115369 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 19:50:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.115369 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 19:50:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.115369 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 19:50:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.115369 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 19:50:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.115369 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 19:50:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.115369 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 19:50:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.115369 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 19:50:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Apr-25 19:50:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Apr-25 19:50:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Apr-25 19:50:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Apr-25 19:50:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Apr-25 19:50:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Apr-25 19:50:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Apr-25 19:50:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Apr-25 19:50:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Apr-25 19:50:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Apr-25 19:50:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Apr-25 19:50:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Apr-25 19:50:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Apr-25 19:50:13 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Apr-25 19:50:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Apr-25 19:50:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Apr-25 19:50:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Apr-25 19:50:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Apr-25 19:50:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Apr-25 19:50:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Apr-25 19:50:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Apr-25 19:50:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Apr-25 19:50:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Apr-25 19:50:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Apr-25 19:50:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Apr-25 19:50:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Apr-25 19:50:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Apr-25 19:50:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Apr-25 19:50:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Apr-25 19:50:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Apr-25 19:50:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Apr-25 19:50:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Apr-25 19:50:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Apr-25 19:50:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Apr-25 19:50:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Apr-25 19:50:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Apr-25 19:50:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Apr-25 19:50:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Apr-25 19:50:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Apr-25 19:50:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Apr-25 19:50:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Apr-25 19:50:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Apr-25 19:50:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Apr-25 20:10:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 20:10:05 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-25 20:10:05 LOG5 end_task: Level: (4) ID = <10201> Status = 0 0 0 0 ok 2008-Apr-25 20:10:05 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-25 20:10:05 LOG5 end_task: Level: (3) ID = <10200> Status = 0 0 0 0 ok 2008-Apr-25 20:10:05 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-25 20:10:05 LOG5 finish_task: Level: (2) ID = <10167> Status = 0 0 0 0 ok 2008-Apr-25 20:10:05 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-25 20:10:05 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-25 20:10:05 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-25 20:10:05 LOG5 end_task: Level: (2) ID = <10167> Status = 0 0 0 0 ok 2008-Apr-25 20:10:05 COMMAND run_command_line: EXECUTING command 19: 'FIXEDDRIFT az=150.97 alfaangle=45.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_007 ra=95300.00 dec=234400.00' 2008-Apr-25 20:10:05 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-25 20:10:06 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-25 20:10:06 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 150.97 45.6 hcorcal 5 tracking no first 1 AGES3193_p2_007 95300.00 234400.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-25 20:10:06 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-25 20:10:06 LOG5 begin_task: Level: (2) ID = <10202> Status = 0 0 0 0 ok 2008-Apr-25 20:10:06 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES3193_p2_005' 2008-Apr-25 20:10:06 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-25 20:10:06 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p2_007} 2008-Apr-25 20:10:06 INFO3 fixed_driftmap: Sending telescope to Az = 150.97 and ZA = 6.14 2008-Apr-25 20:10:06 LOG3 track_source: Calling 'track_source AGES3193_p2_007 150.97 6.1414432766 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-25 20:10:06 START begin_task: Starting task 'sending tracking commands' 2008-Apr-25 20:10:06 LOG5 begin_task: Level: (3) ID = <10203> Status = 0 0 0 0 ok 2008-Apr-25 20:10:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_007} INFO {Slewing to source 'AGES3193_p2_007' ...} 2008-Apr-25 20:10:06 INFO1 track_source: Starting to track AGES3193_p2_007 2008-Apr-25 20:10:06 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_007" 2008-Apr-25 20:10:06 LOG3 vw_send: To DATATAKING: set ra 150.97 2008-Apr-25 20:10:06 LOG3 vw_send: To DATATAKING: set dec 6.1414432766 2008-Apr-25 20:10:06 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-25 20:10:06 LOG3 vw_send: To DATATAKING: pnt tr 150.97 6.1414432766 -CF 2008-Apr-25 20:10:06 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-25 20:10:06 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-25 20:10:06 LOG5 finish_task: Level: (3) ID = <10203> Status = 0 0 0 0 ok 2008-Apr-25 20:10:06 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-25 20:10:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 20:10:06 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-25 20:10:06 LOG5 end_task: Level: (3) ID = <10203> Status = 0 0 0 0 ok 2008-Apr-25 20:10:06 START begin_task: Starting task 'rotate ALFA to +45.6 degrees' 2008-Apr-25 20:10:06 LOG5 begin_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2008-Apr-25 20:10:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +45.6 degrees ...} 2008-Apr-25 20:10:06 INFO2 rotate_alfa: ALFA commanded to +45.6 degrees 2008-Apr-25 20:10:06 LOG3 sock_errsend: To ALFAMOTOR: POSITION 45.6 REPLY 2008-Apr-25 20:10:06 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-25 20:10:06 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-25 20:10:06 LOG5 begin_task: Level: (4) ID = <10205> Status = 0 0 0 0 ok 2008-Apr-25 20:10:06 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_007" 2008-Apr-25 20:10:06 LOG4 got_cormsg: From DATATAKING: set ra 150.97 2008-Apr-25 20:10:06 LOG4 got_cormsg: From DATATAKING: set dec 6.1414432766 2008-Apr-25 20:10:06 LOG4 got_cormsg: From DATATAKING: vw% 150.97 2008-Apr-25 20:10:06 LOG4 got_cormsg: From DATATAKING: vw% 6.1414432766 2008-Apr-25 20:10:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 20:10:06 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-25 20:10:06 LOG4 got_cormsg: From DATATAKING: pnt tr 150.97 6.1414432766 -CF 2008-Apr-25 20:10:06 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-25 20:10:06 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-25 20:10:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 20:10:37 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-25 20:10:37 INFO3 alfa_motor: ALFA rotator in-position +45.60 degrees 2008-Apr-25 20:10:37 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-25 20:10:37 LOG5 end_task: Level: (4) ID = <10205> Status = 0 0 0 0 ok 2008-Apr-25 20:10:37 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-25 20:10:37 STOP finish_task: Finishing task 'rotate ALFA to +45.6 degrees' 2008-Apr-25 20:10:37 LOG5 finish_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2008-Apr-25 20:10:37 INFO2 finish_task: DONE finished configuration: rotating ALFA to +45.6 degrees 2008-Apr-25 20:10:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 20:10:37 STOP end_task: Finishing task 'rotate ALFA to +45.6 degrees' with status 'OK' 2008-Apr-25 20:10:37 LOG5 end_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2008-Apr-25 20:10:37 START begin_task: Starting task 'waiting on telescope' 2008-Apr-25 20:10:37 LOG5 begin_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2008-Apr-25 20:10:37 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-25 20:10:37 LOG3 waittrk: Start waittrk 5 2008-Apr-25 20:10:37 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-25 20:10:37 LOG5 begin_task: Level: (4) ID = <10207> Status = 0 0 0 0 ok 2008-Apr-25 20:10:42 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-25 20:10:42 LOG5 end_task: Level: (4) ID = <10207> Status = 0 0 0 0 ok 2008-Apr-25 20:10:42 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-25 20:10:42 LOG5 begin_task: Level: (4) ID = <10208> Status = 0 0 0 0 ok 2008-Apr-25 20:12:37 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-25 20:12:37 LOG5 end_task: Level: (4) ID = <10208> Status = 0 0 0 0 ok 2008-Apr-25 20:12:37 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-25 20:12:37 INFO2 waittrk: Now tracking AGES3193_p2_007 2008-Apr-25 20:12:37 LOG4 waittrk: Current telescope position: Az = 150.76 ZA = 6.16 2008-Apr-25 20:12:37 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-25 20:12:37 LOG5 finish_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2008-Apr-25 20:12:37 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-25 20:12:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 20:12:37 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-25 20:12:37 LOG5 end_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2008-Apr-25 20:12:37 START begin_task: Starting task 'selecting calibration type' 2008-Apr-25 20:12:37 LOG5 begin_task: Level: (3) ID = <10209> Status = 0 0 0 0 ok 2008-Apr-25 20:12:37 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-25 20:12:37 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-25 20:12:37 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 20:12:37 START begin_task: Starting task 'waiting on setcal' 2008-Apr-25 20:12:37 LOG5 begin_task: Level: (4) ID = <10210> Status = 0 0 0 0 ok 2008-Apr-25 20:12:37 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-25 20:12:37 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 20:12:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 20:12:38 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-25 20:12:38 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-25 20:12:38 LOG5 end_task: Level: (4) ID = <10210> Status = 0 0 0 0 ok 2008-Apr-25 20:12:38 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-25 20:12:38 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 20:12:38 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-25 20:12:38 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 20:12:38 LOG5 begin_task: Level: (4) ID = <10211> Status = 0 0 0 0 ok 2008-Apr-25 20:12:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 20:12:39 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 20:12:39 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 20:12:39 LOG5 end_task: Level: (4) ID = <10211> Status = 0 0 0 0 ok 2008-Apr-25 20:12:39 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 20:12:39 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-25 20:12:39 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 20:12:39 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-25 20:12:39 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 20:12:39 LOG5 begin_task: Level: (4) ID = <10212> Status = 0 0 0 0 ok 2008-Apr-25 20:12:39 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 20:12:39 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 20:12:39 LOG5 end_task: Level: (4) ID = <10212> Status = 0 0 0 0 ok 2008-Apr-25 20:12:39 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 20:12:39 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-25 20:12:39 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-25 20:12:39 LOG5 finish_task: Level: (3) ID = <10209> Status = 0 0 0 0 ok 2008-Apr-25 20:12:39 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-25 20:12:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 20:12:39 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-25 20:12:39 LOG5 end_task: Level: (3) ID = <10209> Status = 0 0 0 0 ok 2008-Apr-25 20:12:39 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2008-Apr-25 20:12:39 INFO2 astwait: Waiting for 141 seconds from 00:12:39 to 00:15:00 UTC ... 2008-Apr-25 20:12:39 LOG4 send_obs_status: To obs_status: <1> TASKTIME 141 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-25 20:12:39 START begin_task: Starting task 'waiting on waiting for AST time' 2008-Apr-25 20:12:39 LOG5 begin_task: Level: (3) ID = <10213> Status = 0 0 0 0 ok 2008-Apr-25 20:15:00 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2008-Apr-25 20:15:00 LOG5 end_task: Level: (3) ID = <10213> Status = 0 0 0 0 ok 2008-Apr-25 20:15:00 INFO3 astwait: Finished waiting 2008-Apr-25 20:15:00 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-25 20:15:00 LOG5 dopset_later: Calling 'dopset_later 61.409883943582486' 2008-Apr-25 20:15:00 INFO3 dopset_later: Setting Doppler correction for 20:16:00 (61.4 seconds from now) 2008-Apr-25 20:15:00 LOG5 antvel: Calling 'antvel 150.970000 6.141443 F 61.409883943582486' 2008-Apr-25 20:15:00 LOG2 antvel: Parameters to Doppler: Heliocentric 87360 2008 116 0.0 2008-Apr-25 20:15:00 INFO5 antvel: Computed antenna velocity: +27.84711 km/s 2008-Apr-25 20:15:00 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=27.8471059098 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-25 20:15:00 INFO4 dopset_gen: New sky frequencies: 1381.115140 1381.115140 1381.115140 1381.115140 1381.115140 1381.115140 1381.115140 1381.115140 1381.115140 2008-Apr-25 20:15:00 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.115140 sky0=1381.115140 sky1=1381.115140 sky2=1381.115140 sky3=1381.115140 sky4=1381.115140 sky5=1381.115140 sky6=1381.115140 sky7=1381.115140 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-25 20:15:00 LOG2 dopset_gen: Result from 'sky2syn': 1631.115140 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-25 20:15:00 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631115140.0} 2008-Apr-25 20:15:00 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 20:15:00 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-25 20:15:00 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-25 20:15:00 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:02.7 Dec = +23:44:01.9 2008-Apr-25 20:15:00 LOG3 track_source: Calling 'track_source AGES3193_p2_007 095202.7 234401.9 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-25 20:15:00 START begin_task: Starting task 'sending tracking commands' 2008-Apr-25 20:15:00 LOG5 begin_task: Level: (3) ID = <10214> Status = 0 0 0 0 ok 2008-Apr-25 20:15:00 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_007} INFO {Slewing to source 'AGES3193_p2_007' ...} 2008-Apr-25 20:15:00 INFO1 track_source: Starting to track AGES3193_p2_007 2008-Apr-25 20:15:00 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_007" 2008-Apr-25 20:15:00 LOG3 vw_send: To DATATAKING: set ra 095202.7 2008-Apr-25 20:15:00 LOG3 vw_send: To DATATAKING: set dec 234401.9 2008-Apr-25 20:15:00 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-25 20:15:00 LOG3 vw_send: To DATATAKING: pnt tr 095202.7 234401.9 -CJ 2008-Apr-25 20:15:00 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-25 20:15:00 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-25 20:15:00 LOG5 finish_task: Level: (3) ID = <10214> Status = 0 0 0 0 ok 2008-Apr-25 20:15:00 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-25 20:15:00 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 20:15:00 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-25 20:15:00 LOG5 end_task: Level: (3) ID = <10214> Status = 0 0 0 0 ok 2008-Apr-25 20:15:00 START begin_task: Starting task 'waiting on telescope' 2008-Apr-25 20:15:00 LOG5 begin_task: Level: (3) ID = <10215> Status = 0 0 0 0 ok 2008-Apr-25 20:15:00 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-25 20:15:00 LOG3 waittrk: Start waittrk 5 2008-Apr-25 20:15:00 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-25 20:15:00 LOG5 begin_task: Level: (4) ID = <10216> Status = 0 0 0 0 ok 2008-Apr-25 20:15:00 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631115140.0} 2008-Apr-25 20:15:00 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 20:15:00 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_007" 2008-Apr-25 20:15:00 LOG4 got_cormsg: From DATATAKING: set ra 095202.7 2008-Apr-25 20:15:00 LOG4 got_cormsg: From DATATAKING: set dec 234401.9 2008-Apr-25 20:15:00 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-25 20:15:00 LOG4 got_cormsg: From DATATAKING: vw% 095202.7 2008-Apr-25 20:15:00 LOG4 got_cormsg: From DATATAKING: vw% 234401.9 2008-Apr-25 20:15:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 20:15:00 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-25 20:15:00 LOG4 got_cormsg: From DATATAKING: pnt tr 095202.7 234401.9 -CJ 2008-Apr-25 20:15:00 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-25 20:15:00 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-25 20:15:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 20:15:05 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-25 20:15:05 LOG5 end_task: Level: (4) ID = <10216> Status = 0 0 0 0 ok 2008-Apr-25 20:15:05 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-25 20:15:05 LOG5 begin_task: Level: (4) ID = <10217> Status = 0 0 0 0 ok 2008-Apr-25 20:15:07 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-25 20:15:07 LOG5 end_task: Level: (4) ID = <10217> Status = 0 0 0 0 ok 2008-Apr-25 20:15:07 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-25 20:15:07 INFO2 waittrk: Now tracking AGES3193_p2_007 2008-Apr-25 20:15:07 LOG4 waittrk: Current telescope position: Az = 150.63 ZA = 6.17 2008-Apr-25 20:15:07 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-25 20:15:07 LOG5 finish_task: Level: (3) ID = <10215> Status = 0 0 0 0 ok 2008-Apr-25 20:15:07 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-25 20:15:07 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 20:15:07 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-25 20:15:07 LOG5 end_task: Level: (3) ID = <10215> Status = 0 0 0 0 ok 2008-Apr-25 20:15:07 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-25 20:15:07 LOG5 begin_task: Level: (3) ID = <10218> Status = 0 0 0 0 ok 2008-Apr-25 20:15:07 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-25 20:15:07 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-25 20:15:07 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-25 20:15:07 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-25 20:15:07 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 20:15:07 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-25 20:15:07 LOG5 begin_task: Level: (4) ID = <10219> Status = 0 0 0 0 ok 2008-Apr-25 20:15:07 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-25 20:15:07 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 20:15:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 20:15:08 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-25 20:15:08 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-25 20:15:08 LOG5 end_task: Level: (4) ID = <10219> Status = 0 0 0 0 ok 2008-Apr-25 20:15:08 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-25 20:15:08 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-25 20:15:08 LOG5 begin_task: Level: (4) ID = <10220> Status = 0 0 0 0 ok 2008-Apr-25 20:15:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-25 20:15:08 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-25 20:15:08 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-25 20:15:08 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-25 20:15:08 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-25 20:15:08 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-25 20:15:08 LOG5 begin_task: Level: (5) ID = <10221> Status = 0 0 0 0 ok 2008-Apr-25 20:15:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 20:15:08 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-25 20:15:08 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 1 dB --- beam 1: 7 6 dB 2008-Apr-25 20:15:08 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-25 20:15:08 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 6 dB 2008-Apr-25 20:15:08 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 2 2 dB 2008-Apr-25 20:15:08 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-25 20:15:08 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-25 20:15:08 LOG5 end_task: Level: (5) ID = <10221> Status = 0 0 0 0 ok 2008-Apr-25 20:15:08 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.093 0.922 ALFA beam 1: 1.067 1.024 2008-Apr-25 20:15:08 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.005 0.906 ALFA beam 3: 0.967 1.014 2008-Apr-25 20:15:08 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.916 0.948 ALFA beam 5: 0.983 0.879 2008-Apr-25 20:15:08 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.947 0.993 ALFA beam 7: 1.033 1.100 2008-Apr-25 20:15:08 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-25 20:15:08 LOG5 finish_task: Level: (4) ID = <10220> Status = 0 0 0 0 ok 2008-Apr-25 20:15:08 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-25 20:15:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 20:15:08 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-25 20:15:08 LOG5 end_task: Level: (4) ID = <10220> Status = 0 0 0 0 ok 2008-Apr-25 20:15:08 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-25 20:15:08 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-25 20:15:08 LOG5 finish_task: Level: (3) ID = <10218> Status = 0 0 0 0 ok 2008-Apr-25 20:15:08 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-25 20:15:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 20:15:08 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-25 20:15:08 LOG5 end_task: Level: (3) ID = <10218> Status = 0 0 0 0 ok 2008-Apr-25 20:15:08 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 EM, RM 2008-Apr-25 20:15:08 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 EM, RM 2008-Apr-25 20:15:09 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 EM, RM 2008-Apr-25 20:15:09 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 EM, RM 2008-Apr-25 20:15:09 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-25 20:15:09 START begin_task: Starting task 'WAPP calibration' 2008-Apr-25 20:15:09 LOG5 begin_task: Level: (3) ID = <10222> Status = 0 0 0 0 ok 2008-Apr-25 20:15:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-25 20:15:09 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-25 20:15:09 START begin_task: Starting task 'selecting calibration type' 2008-Apr-25 20:15:09 LOG5 begin_task: Level: (4) ID = <10223> Status = 0 0 0 0 ok 2008-Apr-25 20:15:09 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-25 20:15:09 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-25 20:15:09 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 20:15:09 START begin_task: Starting task 'waiting on setcal' 2008-Apr-25 20:15:09 LOG5 begin_task: Level: (5) ID = <10224> Status = 0 0 0 0 ok 2008-Apr-25 20:15:09 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 EM, RM' 2008-Apr-25 20:15:09 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-25 20:15:09 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 20:15:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 20:15:09 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-25 20:15:09 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-25 20:15:09 LOG5 end_task: Level: (5) ID = <10224> Status = 0 0 0 0 ok 2008-Apr-25 20:15:09 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-25 20:15:09 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 20:15:09 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-25 20:15:09 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 20:15:09 LOG5 begin_task: Level: (5) ID = <10225> Status = 0 0 0 0 ok 2008-Apr-25 20:15:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 20:15:09 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 20:15:09 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 20:15:09 LOG5 end_task: Level: (5) ID = <10225> Status = 0 0 0 0 ok 2008-Apr-25 20:15:09 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 20:15:09 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-25 20:15:09 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 20:15:09 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-25 20:15:09 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 20:15:09 LOG5 begin_task: Level: (5) ID = <10226> Status = 0 0 0 0 ok 2008-Apr-25 20:15:09 NOTE WAPPDATA-new_file: New FITS file: wapp.20080425.a2048.0004.fits 2008-Apr-25 20:15:09 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 20:15:09 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 20:15:09 LOG5 end_task: Level: (5) ID = <10226> Status = 0 0 0 0 ok 2008-Apr-25 20:15:09 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 20:15:09 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-25 20:15:09 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-25 20:15:09 LOG5 finish_task: Level: (4) ID = <10223> Status = 0 0 0 0 ok 2008-Apr-25 20:15:09 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-25 20:15:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 20:15:09 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-25 20:15:09 LOG5 end_task: Level: (4) ID = <10223> Status = 0 0 0 0 ok 2008-Apr-25 20:15:09 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-25 20:15:09 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-25 20:15:09 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-25 20:15:09 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-25 20:15:09 LOG5 begin_task: Level: (4) ID = <10227> Status = 0 0 0 0 ok 2008-Apr-25 20:15:09 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080425.a2048.0004.fits} 2008-Apr-25 20:15:09 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-25 20:15:09 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-25 20:15:09 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-25 20:15:09 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-25 20:15:09 LOG5 end_task: Level: (4) ID = <10227> Status = 0 0 0 0 ok 2008-Apr-25 20:15:09 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-25 20:15:09 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-25 20:15:09 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-25 20:15:09 LOG5 begin_task: Level: (4) ID = <10228> Status = 0 0 0 0 ok 2008-Apr-25 20:15:09 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-25 20:15:09 LOG5 log_alfabeam: Parameters: 9.8674166666666672 23.733861111111111 10.093855 2008.3199010381018 45.599930 2008-Apr-25 20:15:09 LOG4 log_alfabeam: ALFABEAM 0 9.867416666666678 23.733861111111118 2008-Apr-25 20:15:09 LOG4 log_alfabeam: ALFABEAM 1 9.869690887643136 23.632997584973676 2008-Apr-25 20:15:09 LOG4 log_alfabeam: ALFABEAM 2 9.874205147618721 23.699855870890829 2008-Apr-25 20:15:09 LOG4 log_alfabeam: ALFABEAM 3 9.872045488993136 23.801223331910208 2008-Apr-25 20:15:09 LOG4 log_alfabeam: ALFABEAM 4 9.865193889344949 23.835047287068239 2008-Apr-25 20:15:09 LOG4 log_alfabeam: ALFABEAM 5 9.860550081832494 23.766428732939019 2008-Apr-25 20:15:09 LOG4 log_alfabeam: ALFABEAM 6 9.862887149185465 23.665760189748031 2008-Apr-25 20:15:09 INFO2 take_spectra: Starting WAPP scan: 811600111 2008-Apr-25 20:15:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-25 20:15:10 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-25 20:15:10 LOG5 begin_task: Level: (5) ID = <10229> Status = 0 0 0 0 ok 2008-Apr-25 20:15:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 20:15:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 911.00 2008-Apr-25 20:15:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.115140 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 20:15:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.115140 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 20:15:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.115140 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 20:15:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.115140 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 20:15:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.115140 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 20:15:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.115140 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 20:15:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.115140 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 20:15:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.115140 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 20:15:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.115140 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 20:15:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 20:15:16 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-25 20:15:16 LOG5 end_task: Level: (5) ID = <10229> Status = 0 0 0 0 ok 2008-Apr-25 20:15:16 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-25 20:15:16 LOG5 end_task: Level: (4) ID = <10228> Status = 0 0 0 0 ok 2008-Apr-25 20:15:16 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-25 20:15:16 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-25 20:15:16 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-25 20:15:16 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-25 20:15:16 LOG5 begin_task: Level: (4) ID = <10230> Status = 0 0 0 0 ok 2008-Apr-25 20:15:17 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-25 20:15:17 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-25 20:15:17 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-25 20:15:17 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-25 20:15:17 LOG5 end_task: Level: (4) ID = <10230> Status = 0 0 0 0 ok 2008-Apr-25 20:15:17 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-25 20:15:17 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-25 20:15:17 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-25 20:15:17 LOG5 begin_task: Level: (4) ID = <10231> Status = 0 0 0 0 ok 2008-Apr-25 20:15:17 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-25 20:15:17 LOG5 log_alfabeam: Parameters: 9.8674166666666672 23.733861111111111 10.095805 2008.3199012599182 45.599930 2008-Apr-25 20:15:17 LOG4 log_alfabeam: ALFABEAM 0 9.867416666666680 23.733861111111118 2008-Apr-25 20:15:17 LOG4 log_alfabeam: ALFABEAM 1 9.869719690635193 23.633120867058846 2008-Apr-25 20:15:17 LOG4 log_alfabeam: ALFABEAM 2 9.874214929915389 23.700224425960403 2008-Apr-25 20:15:17 LOG4 log_alfabeam: ALFABEAM 3 9.872026039865174 23.801473702824183 2008-Apr-25 20:15:17 LOG4 log_alfabeam: ALFABEAM 4 9.865164828882557 23.834926040643065 2008-Apr-25 20:15:17 LOG4 log_alfabeam: ALFABEAM 5 9.860540891627320 23.766059024472980 2008-Apr-25 20:15:17 LOG4 log_alfabeam: ALFABEAM 6 9.862906587002094 23.665516753058196 2008-Apr-25 20:15:17 INFO2 take_spectra: Starting WAPP scan: 811600112 2008-Apr-25 20:15:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-25 20:15:17 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-25 20:15:17 LOG5 begin_task: Level: (5) ID = <10232> Status = 0 0 0 0 ok 2008-Apr-25 20:15:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 20:15:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 918.00 2008-Apr-25 20:15:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.553 > 1.4)! 2008-Apr-25 20:15:22 LOG4 check_wapp_levels: WAPP-1 power levels: 1.522 1.182 1.466 1.407 2008-Apr-25 20:15:22 LOG4 check_wapp_levels: WAPP-2 power levels: 1.379 1.268 1.353 1.405 2008-Apr-25 20:15:22 LOG4 check_wapp_levels: WAPP-3 power levels: 1.294 1.330 1.389 1.190 2008-Apr-25 20:15:22 LOG4 check_wapp_levels: WAPP-4 power levels: 1.356 1.403 1.479 1.553 2008-Apr-25 20:15:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.115140 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 20:15:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.115140 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 20:15:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.115140 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 20:15:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.115140 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 20:15:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.115140 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 20:15:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.115140 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 20:15:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.115140 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 20:15:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.115140 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 20:15:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.115140 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 20:15:23 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-25 20:15:23 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 20:15:23 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-25 20:15:23 LOG5 end_task: Level: (5) ID = <10232> Status = 0 0 0 0 ok 2008-Apr-25 20:15:23 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-25 20:15:23 LOG5 end_task: Level: (4) ID = <10231> Status = 0 0 0 0 ok 2008-Apr-25 20:15:23 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-25 20:15:23 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-25 20:15:23 LOG5 finish_task: Level: (3) ID = <10222> Status = 0 0 0 0 ok 2008-Apr-25 20:15:23 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-25 20:15:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 20:15:23 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-25 20:15:23 LOG5 end_task: Level: (3) ID = <10222> Status = 0 0 0 0 ok 2008-Apr-25 20:15:24 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-25 20:15:24 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 150.97 and ZA = 6.14 2008-Apr-25 20:15:24 LOG3 track_source: Calling 'track_source AGES3193_p2_007 150.97 6.1414432766 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-25 20:15:24 START begin_task: Starting task 'sending tracking commands' 2008-Apr-25 20:15:24 LOG5 begin_task: Level: (3) ID = <10233> Status = 0 0 0 0 ok 2008-Apr-25 20:15:24 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_007} INFO {Slewing to source 'AGES3193_p2_007' ...} 2008-Apr-25 20:15:24 INFO1 track_source: Starting to track AGES3193_p2_007 2008-Apr-25 20:15:24 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_007" 2008-Apr-25 20:15:24 LOG3 vw_send: To DATATAKING: set ra 150.97 2008-Apr-25 20:15:24 LOG3 vw_send: To DATATAKING: set dec 6.1414432766 2008-Apr-25 20:15:24 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-25 20:15:24 LOG3 vw_send: To DATATAKING: pnt tr 150.97 6.1414432766 -CF 2008-Apr-25 20:15:24 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-25 20:15:24 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-25 20:15:24 LOG5 finish_task: Level: (3) ID = <10233> Status = 0 0 0 0 ok 2008-Apr-25 20:15:24 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-25 20:15:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 20:15:24 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-25 20:15:24 LOG5 end_task: Level: (3) ID = <10233> Status = 0 0 0 0 ok 2008-Apr-25 20:15:24 LOG1 fixed_driftmap: Parameters: HA = +00:13:00.0 Start = 10:06:29.4 LST = 10:05:51.9 diff = 37.5 secs 2008-Apr-25 20:15:24 INFO2 fixed_driftmap: Waiting 35.5 seconds for RA 9:53:29 2008-Apr-25 20:15:24 INFO2 lstwait: Waiting for 35.4 secs from LST 10:05:52 to LST 10:06:27 ... 2008-Apr-25 20:15:24 LOG4 send_obs_status: To obs_status: <1> TASKTIME 35.415054549985179 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-25 20:15:24 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-25 20:15:24 LOG5 begin_task: Level: (3) ID = <10234> Status = 0 0 0 0 ok 2008-Apr-25 20:15:24 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_007" 2008-Apr-25 20:15:24 LOG4 got_cormsg: From DATATAKING: set ra 150.97 2008-Apr-25 20:15:24 LOG4 got_cormsg: From DATATAKING: set dec 6.1414432766 2008-Apr-25 20:15:24 LOG4 got_cormsg: From DATATAKING: vw% 150.97 2008-Apr-25 20:15:24 LOG4 got_cormsg: From DATATAKING: vw% 6.1414432766 2008-Apr-25 20:15:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 20:15:24 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-25 20:15:24 LOG4 got_cormsg: From DATATAKING: pnt tr 150.97 6.1414432766 -CF 2008-Apr-25 20:15:24 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-25 20:15:24 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-25 20:15:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 20:15:28 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.881 and 1.098 2008-Apr-25 20:15:59 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-25 20:15:59 LOG5 end_task: Level: (3) ID = <10234> Status = 0 0 0 0 ok 2008-Apr-25 20:15:59 LOG4 lstwait: Finished waiting, the gui caused difference: 0.58518344000262346 2008-Apr-25 20:15:59 INFO3 lstwait: Finished waiting 2008-Apr-25 20:15:59 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-25 20:15:59 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-25 20:15:59 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-25 20:15:59 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-25 20:15:59 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-25 20:15:59 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-25 20:15:59 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-25 20:15:59 LOG5 begin_task: Level: (3) ID = <10235> Status = 0 0 0 0 ok 2008-Apr-25 20:15:59 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-25 20:15:59 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-25 20:15:59 INFO2 take_spectra: Starting WAPP scan: 811600113 2008-Apr-25 20:16:00 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-25 20:16:00 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-25 20:16:00 LOG5 begin_task: Level: (4) ID = <10236> Status = 0 0 0 0 ok 2008-Apr-25 20:16:00 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 20:16:00 INFO1 WAPP=1+2+3+4-start_spectra: start sec 961.00 2008-Apr-25 20:16:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.115140 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 20:16:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.115140 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 20:16:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.115140 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 20:16:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.115140 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 20:16:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.115140 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 20:16:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.115140 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 20:16:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.115140 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 20:16:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.115140 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 20:16:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.115140 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 20:36:01 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 20:36:01 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-25 20:36:01 LOG5 end_task: Level: (4) ID = <10236> Status = 0 0 0 0 ok 2008-Apr-25 20:36:01 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-25 20:36:01 LOG5 end_task: Level: (3) ID = <10235> Status = 0 0 0 0 ok 2008-Apr-25 20:36:01 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-25 20:36:01 LOG5 finish_task: Level: (2) ID = <10202> Status = 0 0 0 0 ok 2008-Apr-25 20:36:01 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-25 20:36:01 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-25 20:36:01 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-25 20:36:01 LOG5 end_task: Level: (2) ID = <10202> Status = 0 0 0 0 ok 2008-Apr-25 20:36:01 COMMAND run_command_line: EXECUTING command 23: 'FIXEDDRIFT az=123.75 alfaangle=74.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_009 ra=95300.00 dec=234100.00' 2008-Apr-25 20:36:01 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-25 20:36:02 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-25 20:36:02 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 123.75 74.6 hcorcal 5 tracking no first 1 AGES3193_p2_009 95300.00 234100.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-25 20:36:02 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-25 20:36:02 LOG5 begin_task: Level: (2) ID = <10237> Status = 0 0 0 0 ok 2008-Apr-25 20:36:02 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES3193_p2_007' 2008-Apr-25 20:36:02 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-25 20:36:02 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p2_009} 2008-Apr-25 20:36:02 INFO3 fixed_driftmap: Sending telescope to Az = 123.75 and ZA = 9.93 2008-Apr-25 20:36:02 LOG3 track_source: Calling 'track_source AGES3193_p2_009 123.75 9.9254539585 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-25 20:36:02 START begin_task: Starting task 'sending tracking commands' 2008-Apr-25 20:36:02 LOG5 begin_task: Level: (3) ID = <10238> Status = 0 0 0 0 ok 2008-Apr-25 20:36:02 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_009} INFO {Slewing to source 'AGES3193_p2_009' ...} 2008-Apr-25 20:36:02 INFO1 track_source: Starting to track AGES3193_p2_009 2008-Apr-25 20:36:02 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_009" 2008-Apr-25 20:36:02 LOG3 vw_send: To DATATAKING: set ra 123.75 2008-Apr-25 20:36:02 LOG3 vw_send: To DATATAKING: set dec 9.9254539585 2008-Apr-25 20:36:02 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-25 20:36:02 LOG3 vw_send: To DATATAKING: pnt tr 123.75 9.9254539585 -CF 2008-Apr-25 20:36:02 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-25 20:36:02 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-25 20:36:02 LOG5 finish_task: Level: (3) ID = <10238> Status = 0 0 0 0 ok 2008-Apr-25 20:36:02 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-25 20:36:02 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 20:36:02 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-25 20:36:02 LOG5 end_task: Level: (3) ID = <10238> Status = 0 0 0 0 ok 2008-Apr-25 20:36:02 START begin_task: Starting task 'rotate ALFA to +74.6 degrees' 2008-Apr-25 20:36:02 LOG5 begin_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2008-Apr-25 20:36:02 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +74.6 degrees ...} 2008-Apr-25 20:36:02 INFO2 rotate_alfa: ALFA commanded to +74.6 degrees 2008-Apr-25 20:36:02 LOG3 sock_errsend: To ALFAMOTOR: POSITION 74.6 REPLY 2008-Apr-25 20:36:02 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-25 20:36:02 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-25 20:36:02 LOG5 begin_task: Level: (4) ID = <10240> Status = 0 0 0 0 ok 2008-Apr-25 20:36:02 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_009" 2008-Apr-25 20:36:02 LOG4 got_cormsg: From DATATAKING: set ra 123.75 2008-Apr-25 20:36:02 LOG4 got_cormsg: From DATATAKING: set dec 9.9254539585 2008-Apr-25 20:36:02 LOG4 got_cormsg: From DATATAKING: vw% 123.75 2008-Apr-25 20:36:02 LOG4 got_cormsg: From DATATAKING: vw% 9.9254539585 2008-Apr-25 20:36:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 20:36:02 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-25 20:36:02 LOG4 got_cormsg: From DATATAKING: pnt tr 123.75 9.9254539585 -CF 2008-Apr-25 20:36:02 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-25 20:36:02 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-25 20:36:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 20:36:20 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-25 20:36:20 INFO3 alfa_motor: ALFA rotator in-position +74.60 degrees 2008-Apr-25 20:36:20 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-25 20:36:20 LOG5 end_task: Level: (4) ID = <10240> Status = 0 0 0 0 ok 2008-Apr-25 20:36:20 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-25 20:36:20 STOP finish_task: Finishing task 'rotate ALFA to +74.6 degrees' 2008-Apr-25 20:36:20 LOG5 finish_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2008-Apr-25 20:36:20 INFO2 finish_task: DONE finished configuration: rotating ALFA to +74.6 degrees 2008-Apr-25 20:36:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 20:36:20 STOP end_task: Finishing task 'rotate ALFA to +74.6 degrees' with status 'OK' 2008-Apr-25 20:36:20 LOG5 end_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2008-Apr-25 20:36:20 START begin_task: Starting task 'waiting on telescope' 2008-Apr-25 20:36:20 LOG5 begin_task: Level: (3) ID = <10241> Status = 0 0 0 0 ok 2008-Apr-25 20:36:20 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-25 20:36:20 LOG3 waittrk: Start waittrk 5 2008-Apr-25 20:36:20 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-25 20:36:20 LOG5 begin_task: Level: (4) ID = <10242> Status = 0 0 0 0 ok 2008-Apr-25 20:36:25 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-25 20:36:25 LOG5 end_task: Level: (4) ID = <10242> Status = 0 0 0 0 ok 2008-Apr-25 20:36:25 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-25 20:36:25 LOG5 begin_task: Level: (4) ID = <10243> Status = 0 0 0 0 ok 2008-Apr-25 20:37:43 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-25 20:37:43 LOG5 end_task: Level: (4) ID = <10243> Status = 0 0 0 0 ok 2008-Apr-25 20:37:43 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-25 20:37:43 INFO2 waittrk: Now tracking AGES3193_p2_009 2008-Apr-25 20:37:43 LOG4 waittrk: Current telescope position: Az = 123.55 ZA = 9.93 2008-Apr-25 20:37:43 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-25 20:37:43 LOG5 finish_task: Level: (3) ID = <10241> Status = 0 0 0 0 ok 2008-Apr-25 20:37:43 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-25 20:37:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 20:37:43 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-25 20:37:43 LOG5 end_task: Level: (3) ID = <10241> Status = 0 0 0 0 ok 2008-Apr-25 20:37:43 START begin_task: Starting task 'selecting calibration type' 2008-Apr-25 20:37:43 LOG5 begin_task: Level: (3) ID = <10244> Status = 0 0 0 0 ok 2008-Apr-25 20:37:43 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-25 20:37:43 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-25 20:37:43 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 20:37:43 START begin_task: Starting task 'waiting on setcal' 2008-Apr-25 20:37:43 LOG5 begin_task: Level: (4) ID = <10245> Status = 0 0 0 0 ok 2008-Apr-25 20:37:43 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-25 20:37:43 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 20:37:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 20:37:44 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-25 20:37:44 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-25 20:37:44 LOG5 end_task: Level: (4) ID = <10245> Status = 0 0 0 0 ok 2008-Apr-25 20:37:44 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-25 20:37:44 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 20:37:44 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-25 20:37:44 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 20:37:44 LOG5 begin_task: Level: (4) ID = <10246> Status = 0 0 0 0 ok 2008-Apr-25 20:37:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 20:37:45 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 20:37:45 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 20:37:45 LOG5 end_task: Level: (4) ID = <10246> Status = 0 0 0 0 ok 2008-Apr-25 20:37:45 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 20:37:45 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-25 20:37:45 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 20:37:45 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-25 20:37:45 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 20:37:45 LOG5 begin_task: Level: (4) ID = <10247> Status = 0 0 0 0 ok 2008-Apr-25 20:37:45 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 20:37:45 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 20:37:45 LOG5 end_task: Level: (4) ID = <10247> Status = 0 0 0 0 ok 2008-Apr-25 20:37:45 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 20:37:45 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-25 20:37:45 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-25 20:37:45 LOG5 finish_task: Level: (3) ID = <10244> Status = 0 0 0 0 ok 2008-Apr-25 20:37:45 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-25 20:37:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 20:37:45 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-25 20:37:45 LOG5 end_task: Level: (3) ID = <10244> Status = 0 0 0 0 ok 2008-Apr-25 20:37:45 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2008-Apr-25 20:37:45 INFO2 astwait: Waiting for 12 seconds from 00:37:45 to 00:37:57 UTC ... 2008-Apr-25 20:37:45 LOG4 send_obs_status: To obs_status: <1> TASKTIME 12 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-25 20:37:45 START begin_task: Starting task 'waiting on waiting for AST time' 2008-Apr-25 20:37:45 LOG5 begin_task: Level: (3) ID = <10248> Status = 0 0 0 0 ok 2008-Apr-25 20:37:57 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2008-Apr-25 20:37:57 LOG5 end_task: Level: (3) ID = <10248> Status = 0 0 0 0 ok 2008-Apr-25 20:37:57 INFO3 astwait: Finished waiting 2008-Apr-25 20:37:57 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-25 20:37:57 LOG5 dopset_later: Calling 'dopset_later 60.845961852056213' 2008-Apr-25 20:37:57 INFO3 dopset_later: Setting Doppler correction for 20:38:57 (60.8 seconds from now) 2008-Apr-25 20:37:57 LOG5 antvel: Calling 'antvel 123.750000 9.925454 F 60.845961852056213' 2008-Apr-25 20:37:57 LOG2 antvel: Parameters to Doppler: Heliocentric 88737 2008 116 0.0 2008-Apr-25 20:37:57 INFO5 antvel: Computed antenna velocity: +27.89123 km/s 2008-Apr-25 20:37:57 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=27.891227768699999 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-25 20:37:57 INFO4 dopset_gen: New sky frequencies: 1381.114936 1381.114936 1381.114936 1381.114936 1381.114936 1381.114936 1381.114936 1381.114936 1381.114936 2008-Apr-25 20:37:57 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.114936 sky0=1381.114936 sky1=1381.114936 sky2=1381.114936 sky3=1381.114936 sky4=1381.114936 sky5=1381.114936 sky6=1381.114936 sky7=1381.114936 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-25 20:37:57 LOG2 dopset_gen: Result from 'sky2syn': 1631.114936 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-25 20:37:57 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631114936.0} 2008-Apr-25 20:37:57 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 20:37:57 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-25 20:37:57 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-25 20:37:57 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:03.2 Dec = +23:41:01.9 2008-Apr-25 20:37:57 LOG3 track_source: Calling 'track_source AGES3193_p2_009 095203.2 234101.9 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-25 20:37:57 START begin_task: Starting task 'sending tracking commands' 2008-Apr-25 20:37:57 LOG5 begin_task: Level: (3) ID = <10249> Status = 0 0 0 0 ok 2008-Apr-25 20:37:57 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_009} INFO {Slewing to source 'AGES3193_p2_009' ...} 2008-Apr-25 20:37:57 INFO1 track_source: Starting to track AGES3193_p2_009 2008-Apr-25 20:37:57 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_009" 2008-Apr-25 20:37:57 LOG3 vw_send: To DATATAKING: set ra 095203.2 2008-Apr-25 20:37:57 LOG3 vw_send: To DATATAKING: set dec 234101.9 2008-Apr-25 20:37:57 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-25 20:37:57 LOG3 vw_send: To DATATAKING: pnt tr 095203.2 234101.9 -CJ 2008-Apr-25 20:37:57 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-25 20:37:57 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-25 20:37:57 LOG5 finish_task: Level: (3) ID = <10249> Status = 0 0 0 0 ok 2008-Apr-25 20:37:57 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-25 20:37:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 20:37:57 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-25 20:37:57 LOG5 end_task: Level: (3) ID = <10249> Status = 0 0 0 0 ok 2008-Apr-25 20:37:57 START begin_task: Starting task 'waiting on telescope' 2008-Apr-25 20:37:57 LOG5 begin_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2008-Apr-25 20:37:57 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-25 20:37:57 LOG3 waittrk: Start waittrk 5 2008-Apr-25 20:37:57 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-25 20:37:57 LOG5 begin_task: Level: (4) ID = <10251> Status = 0 0 0 0 ok 2008-Apr-25 20:37:57 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631114936.0} 2008-Apr-25 20:37:57 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 20:37:57 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 20:37:57 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_009" 2008-Apr-25 20:37:57 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-25 20:37:57 LOG4 got_cormsg: From DATATAKING: set ra 095203.2 2008-Apr-25 20:37:57 LOG4 got_cormsg: From DATATAKING: set dec 234101.9 2008-Apr-25 20:37:57 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-25 20:37:57 LOG4 got_cormsg: From DATATAKING: pnt tr 095203.2 234101.9 -CJ 2008-Apr-25 20:37:57 LOG4 got_cormsg: From DATATAKING: 095203.2 2008-Apr-25 20:37:57 LOG4 got_cormsg: From DATATAKING: vw% 234101.9 2008-Apr-25 20:37:57 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2008-Apr-25 20:37:57 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-25 20:37:57 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 20:38:02 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-25 20:38:02 LOG5 end_task: Level: (4) ID = <10251> Status = 0 0 0 0 ok 2008-Apr-25 20:38:02 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-25 20:38:02 LOG5 begin_task: Level: (4) ID = <10252> Status = 0 0 0 0 ok 2008-Apr-25 20:38:04 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-25 20:38:04 LOG5 end_task: Level: (4) ID = <10252> Status = 0 0 0 0 ok 2008-Apr-25 20:38:04 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-25 20:38:04 INFO2 waittrk: Now tracking AGES3193_p2_009 2008-Apr-25 20:38:04 LOG4 waittrk: Current telescope position: Az = 123.50 ZA = 9.95 2008-Apr-25 20:38:04 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-25 20:38:04 LOG5 finish_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2008-Apr-25 20:38:04 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-25 20:38:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 20:38:04 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-25 20:38:04 LOG5 end_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2008-Apr-25 20:38:04 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-25 20:38:04 LOG5 begin_task: Level: (3) ID = <10253> Status = 0 0 0 0 ok 2008-Apr-25 20:38:04 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-25 20:38:04 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-25 20:38:04 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-25 20:38:04 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-25 20:38:04 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 20:38:04 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-25 20:38:04 LOG5 begin_task: Level: (4) ID = <10254> Status = 0 0 0 0 ok 2008-Apr-25 20:38:04 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-25 20:38:04 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 20:38:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 20:38:05 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-25 20:38:05 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-25 20:38:05 LOG5 end_task: Level: (4) ID = <10254> Status = 0 0 0 0 ok 2008-Apr-25 20:38:05 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-25 20:38:05 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-25 20:38:05 LOG5 begin_task: Level: (4) ID = <10255> Status = 0 0 0 0 ok 2008-Apr-25 20:38:05 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-25 20:38:05 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-25 20:38:05 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-25 20:38:05 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-25 20:38:05 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-25 20:38:05 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-25 20:38:05 LOG5 begin_task: Level: (5) ID = <10256> Status = 0 0 0 0 ok 2008-Apr-25 20:38:05 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-25 20:38:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 20:38:05 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 1 dB --- beam 1: 7 6 dB 2008-Apr-25 20:38:05 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-25 20:38:05 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 6 dB 2008-Apr-25 20:38:05 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 2 2 dB 2008-Apr-25 20:38:05 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-25 20:38:05 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-25 20:38:05 LOG5 end_task: Level: (5) ID = <10256> Status = 0 0 0 0 ok 2008-Apr-25 20:38:05 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.120 0.935 ALFA beam 1: 1.110 1.053 2008-Apr-25 20:38:05 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.068 0.951 ALFA beam 3: 1.010 1.028 2008-Apr-25 20:38:05 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.928 0.934 ALFA beam 5: 1.001 0.891 2008-Apr-25 20:38:05 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.965 1.006 ALFA beam 7: 1.055 1.112 2008-Apr-25 20:38:05 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-25 20:38:05 LOG5 finish_task: Level: (4) ID = <10255> Status = 0 0 0 0 ok 2008-Apr-25 20:38:05 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-25 20:38:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 20:38:05 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-25 20:38:05 LOG5 end_task: Level: (4) ID = <10255> Status = 0 0 0 0 ok 2008-Apr-25 20:38:05 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-25 20:38:05 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-25 20:38:05 LOG5 finish_task: Level: (3) ID = <10253> Status = 0 0 0 0 ok 2008-Apr-25 20:38:05 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-25 20:38:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 20:38:05 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-25 20:38:05 LOG5 end_task: Level: (3) ID = <10253> Status = 0 0 0 0 ok 2008-Apr-25 20:38:06 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 EM, RM 2008-Apr-25 20:38:06 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 EM, RM 2008-Apr-25 20:38:06 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 EM, RM 2008-Apr-25 20:38:06 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 EM, RM 2008-Apr-25 20:38:06 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-25 20:38:06 START begin_task: Starting task 'WAPP calibration' 2008-Apr-25 20:38:06 LOG5 begin_task: Level: (3) ID = <10257> Status = 0 0 0 0 ok 2008-Apr-25 20:38:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-25 20:38:06 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-25 20:38:06 START begin_task: Starting task 'selecting calibration type' 2008-Apr-25 20:38:06 LOG5 begin_task: Level: (4) ID = <10258> Status = 0 0 0 0 ok 2008-Apr-25 20:38:06 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-25 20:38:06 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-25 20:38:06 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 20:38:06 START begin_task: Starting task 'waiting on setcal' 2008-Apr-25 20:38:06 LOG5 begin_task: Level: (5) ID = <10259> Status = 0 0 0 0 ok 2008-Apr-25 20:38:06 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 EM, RM' 2008-Apr-25 20:38:06 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-25 20:38:06 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 20:38:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 20:38:06 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-25 20:38:06 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-25 20:38:06 LOG5 end_task: Level: (5) ID = <10259> Status = 0 0 0 0 ok 2008-Apr-25 20:38:06 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-25 20:38:06 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 20:38:06 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-25 20:38:06 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 20:38:06 LOG5 begin_task: Level: (5) ID = <10260> Status = 0 0 0 0 ok 2008-Apr-25 20:38:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 20:38:06 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 20:38:06 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 20:38:06 LOG5 end_task: Level: (5) ID = <10260> Status = 0 0 0 0 ok 2008-Apr-25 20:38:06 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 20:38:06 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-25 20:38:06 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 20:38:06 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-25 20:38:06 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 20:38:06 LOG5 begin_task: Level: (5) ID = <10261> Status = 0 0 0 0 ok 2008-Apr-25 20:38:06 NOTE WAPPDATA-new_file: New FITS file: wapp.20080425.a2048.0005.fits 2008-Apr-25 20:38:06 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 20:38:06 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 20:38:06 LOG5 end_task: Level: (5) ID = <10261> Status = 0 0 0 0 ok 2008-Apr-25 20:38:06 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 20:38:06 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-25 20:38:06 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-25 20:38:06 LOG5 finish_task: Level: (4) ID = <10258> Status = 0 0 0 0 ok 2008-Apr-25 20:38:06 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-25 20:38:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 20:38:06 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-25 20:38:06 LOG5 end_task: Level: (4) ID = <10258> Status = 0 0 0 0 ok 2008-Apr-25 20:38:06 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-25 20:38:06 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-25 20:38:06 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-25 20:38:06 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-25 20:38:06 LOG5 begin_task: Level: (4) ID = <10262> Status = 0 0 0 0 ok 2008-Apr-25 20:38:06 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080425.a2048.0005.fits} 2008-Apr-25 20:38:06 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-25 20:38:06 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-25 20:38:06 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-25 20:38:06 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-25 20:38:06 LOG5 end_task: Level: (4) ID = <10262> Status = 0 0 0 0 ok 2008-Apr-25 20:38:06 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-25 20:38:06 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-25 20:38:06 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-25 20:38:06 LOG5 begin_task: Level: (4) ID = <10263> Status = 0 0 0 0 ok 2008-Apr-25 20:38:06 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-25 20:38:06 LOG5 log_alfabeam: Parameters: 9.8675555555555547 23.68386111111111 10.477403 2008.3199446725987 74.599960 2008-Apr-25 20:38:06 LOG4 log_alfabeam: ALFABEAM 0 9.867555555555555 23.683861111111106 2008-Apr-25 20:38:06 LOG4 log_alfabeam: ALFABEAM 1 9.869989193014813 23.590383188931931 2008-Apr-25 20:38:06 LOG4 log_alfabeam: ALFABEAM 2 9.874897836578894 23.652491912657091 2008-Apr-25 20:38:06 LOG4 log_alfabeam: ALFABEAM 3 9.872520193540408 23.746129924524151 2008-Apr-25 20:38:06 LOG4 log_alfabeam: ALFABEAM 4 9.865179935270408 23.777959985858466 2008-Apr-25 20:38:06 LOG4 log_alfabeam: ALFABEAM 5 9.860195155699907 23.714694100147174 2008-Apr-25 20:38:06 LOG4 log_alfabeam: ALFABEAM 6 9.862627113990525 23.620754773473212 2008-Apr-25 20:38:06 INFO2 take_spectra: Starting WAPP scan: 811600114 2008-Apr-25 20:38:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-25 20:38:07 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-25 20:38:07 LOG5 begin_task: Level: (5) ID = <10264> Status = 0 0 0 0 ok 2008-Apr-25 20:38:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 20:38:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 2288.00 2008-Apr-25 20:38:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.114936 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 20:38:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.114936 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 20:38:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.114936 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 20:38:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.114936 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 20:38:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.114936 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 20:38:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.114936 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 20:38:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.114936 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 20:38:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.114936 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 20:38:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.114936 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 20:38:13 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 20:38:13 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-25 20:38:13 LOG5 end_task: Level: (5) ID = <10264> Status = 0 0 0 0 ok 2008-Apr-25 20:38:13 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-25 20:38:13 LOG5 end_task: Level: (4) ID = <10263> Status = 0 0 0 0 ok 2008-Apr-25 20:38:13 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-25 20:38:13 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-25 20:38:13 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-25 20:38:13 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-25 20:38:13 LOG5 begin_task: Level: (4) ID = <10265> Status = 0 0 0 0 ok 2008-Apr-25 20:38:14 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-25 20:38:14 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-25 20:38:14 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-25 20:38:14 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-25 20:38:14 LOG5 end_task: Level: (4) ID = <10265> Status = 0 0 0 0 ok 2008-Apr-25 20:38:14 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-25 20:38:14 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-25 20:38:14 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-25 20:38:14 LOG5 begin_task: Level: (4) ID = <10266> Status = 0 0 0 0 ok 2008-Apr-25 20:38:14 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-25 20:38:14 LOG5 log_alfabeam: Parameters: 9.8675555555555547 23.68386111111111 10.479352 2008.3199448944151 74.599960 2008-Apr-25 20:38:14 LOG4 log_alfabeam: ALFABEAM 0 9.867555555555562 23.683861111111106 2008-Apr-25 20:38:14 LOG4 log_alfabeam: ALFABEAM 1 9.869999663818609 23.590434392520926 2008-Apr-25 20:38:14 LOG4 log_alfabeam: ALFABEAM 2 9.874901389974625 23.652648898406316 2008-Apr-25 20:38:14 LOG4 log_alfabeam: ALFABEAM 3 9.872513119797926 23.746236557333535 2008-Apr-25 20:38:14 LOG4 log_alfabeam: ALFABEAM 4 9.865169234889876 23.777908526419420 2008-Apr-25 20:38:14 LOG4 log_alfabeam: ALFABEAM 5 9.860191704450651 23.714537812996451 2008-Apr-25 20:38:14 LOG4 log_alfabeam: ALFABEAM 6 9.862634204857919 23.620650807549389 2008-Apr-25 20:38:14 INFO2 take_spectra: Starting WAPP scan: 811600115 2008-Apr-25 20:38:14 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-25 20:38:14 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-25 20:38:14 LOG5 begin_task: Level: (5) ID = <10267> Status = 0 0 0 0 ok 2008-Apr-25 20:38:14 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 20:38:14 INFO1 WAPP=1+2+3+4-start_spectra: start sec 2295.00 2008-Apr-25 20:38:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.562 > 1.4)! 2008-Apr-25 20:38:19 LOG4 check_wapp_levels: WAPP-1 power levels: 1.548 1.198 1.512 1.434 2008-Apr-25 20:38:19 LOG4 check_wapp_levels: WAPP-2 power levels: 1.449 1.315 1.401 1.420 2008-Apr-25 20:38:19 LOG4 check_wapp_levels: WAPP-3 power levels: 1.307 1.313 1.409 1.202 2008-Apr-25 20:38:19 LOG4 check_wapp_levels: WAPP-4 power levels: 1.380 1.414 1.507 1.562 2008-Apr-25 20:38:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.114936 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 20:38:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.114936 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 20:38:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.114936 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 20:38:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.114936 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 20:38:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.114936 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 20:38:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.114936 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 20:38:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.114936 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 20:38:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.114936 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 20:38:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.114936 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 20:38:20 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-25 20:38:20 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 20:38:20 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-25 20:38:20 LOG5 end_task: Level: (5) ID = <10267> Status = 0 0 0 0 ok 2008-Apr-25 20:38:20 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-25 20:38:20 LOG5 end_task: Level: (4) ID = <10266> Status = 0 0 0 0 ok 2008-Apr-25 20:38:20 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-25 20:38:20 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-25 20:38:20 LOG5 finish_task: Level: (3) ID = <10257> Status = 0 0 0 0 ok 2008-Apr-25 20:38:20 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-25 20:38:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 20:38:20 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-25 20:38:20 LOG5 end_task: Level: (3) ID = <10257> Status = 0 0 0 0 ok 2008-Apr-25 20:38:21 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-25 20:38:21 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 123.75 and ZA = 9.93 2008-Apr-25 20:38:21 LOG3 track_source: Calling 'track_source AGES3193_p2_009 123.75 9.9254539585 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-25 20:38:21 START begin_task: Starting task 'sending tracking commands' 2008-Apr-25 20:38:21 LOG5 begin_task: Level: (3) ID = <10268> Status = 0 0 0 0 ok 2008-Apr-25 20:38:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_009} INFO {Slewing to source 'AGES3193_p2_009' ...} 2008-Apr-25 20:38:21 INFO1 track_source: Starting to track AGES3193_p2_009 2008-Apr-25 20:38:21 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_009" 2008-Apr-25 20:38:21 LOG3 vw_send: To DATATAKING: set ra 123.75 2008-Apr-25 20:38:21 LOG3 vw_send: To DATATAKING: set dec 9.9254539585 2008-Apr-25 20:38:21 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-25 20:38:21 LOG3 vw_send: To DATATAKING: pnt tr 123.75 9.9254539585 -CF 2008-Apr-25 20:38:21 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-25 20:38:21 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-25 20:38:21 LOG5 finish_task: Level: (3) ID = <10268> Status = 0 0 0 0 ok 2008-Apr-25 20:38:21 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-25 20:38:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 20:38:21 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-25 20:38:21 LOG5 end_task: Level: (3) ID = <10268> Status = 0 0 0 0 ok 2008-Apr-25 20:38:21 LOG1 fixed_driftmap: Parameters: HA = +00:36:00.2 Start = 10:29:29.6 LST = 10:28:52.7 diff = 36.9 secs 2008-Apr-25 20:38:21 INFO2 fixed_driftmap: Waiting 34.9 seconds for RA 9:53:29 2008-Apr-25 20:38:21 INFO2 lstwait: Waiting for 34.9 secs from LST 10:28:53 to LST 10:29:28 ... 2008-Apr-25 20:38:21 LOG4 send_obs_status: To obs_status: <1> TASKTIME 34.851132458458906 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-25 20:38:21 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-25 20:38:21 LOG5 begin_task: Level: (3) ID = <10269> Status = 0 0 0 0 ok 2008-Apr-25 20:38:21 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_009" 2008-Apr-25 20:38:21 LOG4 got_cormsg: From DATATAKING: set ra 123.75 2008-Apr-25 20:38:21 LOG4 got_cormsg: From DATATAKING: set dec 9.9254539585 2008-Apr-25 20:38:21 LOG4 got_cormsg: From DATATAKING: vw% 123.75 2008-Apr-25 20:38:21 LOG4 got_cormsg: From DATATAKING: vw% 9.9254539585 2008-Apr-25 20:38:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 20:38:21 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-25 20:38:21 LOG4 got_cormsg: From DATATAKING: pnt tr 123.75 9.9254539585 -CF 2008-Apr-25 20:38:21 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-25 20:38:21 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-25 20:38:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 20:38:25 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.892 and 1.117 2008-Apr-25 20:38:56 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-25 20:38:56 LOG5 end_task: Level: (3) ID = <10269> Status = 0 0 0 0 ok 2008-Apr-25 20:38:56 LOG4 lstwait: Finished waiting, the gui caused difference: 0.14984948000531517 2008-Apr-25 20:38:56 INFO3 lstwait: Finished waiting 2008-Apr-25 20:38:56 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-25 20:38:56 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-25 20:38:56 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-25 20:38:56 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-25 20:38:56 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-25 20:38:56 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-25 20:38:56 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-25 20:38:56 LOG5 begin_task: Level: (3) ID = <10270> Status = 0 0 0 0 ok 2008-Apr-25 20:38:56 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-25 20:38:56 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-25 20:38:56 INFO2 take_spectra: Starting WAPP scan: 811600116 2008-Apr-25 20:38:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-25 20:38:56 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-25 20:38:56 LOG5 begin_task: Level: (4) ID = <10271> Status = 0 0 0 0 ok 2008-Apr-25 20:38:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 20:38:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 2337.00 2008-Apr-25 20:38:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.114936 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 20:38:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.114936 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 20:38:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.114936 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 20:38:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.114936 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 20:38:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.114936 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 20:38:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.114936 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 20:38:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.114936 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 20:38:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.114936 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 20:38:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.114936 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 20:51:53 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 20:51:53.305 (seconds: 75113.305)!} 2008-Apr-25 20:51:53 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 20:51:53.305 (seconds: 75113.305)! 2008-Apr-25 20:51:54 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 75112.0 to 75113.0! 2008-Apr-25 20:51:55 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (75112.0 - 75114.0)! 2008-Apr-25 20:58:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 20:58:57 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-25 20:58:57 LOG5 end_task: Level: (4) ID = <10271> Status = 0 0 0 0 ok 2008-Apr-25 20:58:57 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-25 20:58:57 LOG5 end_task: Level: (3) ID = <10270> Status = 0 0 0 0 ok 2008-Apr-25 20:58:57 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-25 20:58:57 LOG5 finish_task: Level: (2) ID = <10237> Status = 0 0 0 0 ok 2008-Apr-25 20:58:57 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-25 20:58:57 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-25 20:58:57 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-25 20:58:57 LOG5 end_task: Level: (2) ID = <10237> Status = 0 0 0 0 ok 2008-Apr-25 20:58:57 COMMAND run_command_line: EXECUTING command 27: 'FIXEDDRIFT az=113.38 alfaangle=88.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_011 ra=95300.00 dec=233800.00' 2008-Apr-25 20:58:57 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-25 20:58:58 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-25 20:58:58 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 113.38 88.3 hcorcal 5 tracking no first 1 AGES3193_p2_011 95300.00 233800.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-25 20:58:58 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-25 20:58:58 LOG5 begin_task: Level: (2) ID = <10272> Status = 0 0 0 0 ok 2008-Apr-25 20:58:58 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES3193_p2_009' 2008-Apr-25 20:58:58 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-25 20:58:58 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p2_011} 2008-Apr-25 20:58:58 INFO3 fixed_driftmap: Sending telescope to Az = 113.38 and ZA = 14.72 2008-Apr-25 20:58:58 LOG3 track_source: Calling 'track_source AGES3193_p2_011 113.38 14.7219872338 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-25 20:58:58 START begin_task: Starting task 'sending tracking commands' 2008-Apr-25 20:58:58 LOG5 begin_task: Level: (3) ID = <10273> Status = 0 0 0 0 ok 2008-Apr-25 20:58:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_011} INFO {Slewing to source 'AGES3193_p2_011' ...} 2008-Apr-25 20:58:58 INFO1 track_source: Starting to track AGES3193_p2_011 2008-Apr-25 20:58:58 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_011" 2008-Apr-25 20:58:58 LOG3 vw_send: To DATATAKING: set ra 113.38 2008-Apr-25 20:58:58 LOG3 vw_send: To DATATAKING: set dec 14.7219872338 2008-Apr-25 20:58:58 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-25 20:58:58 LOG3 vw_send: To DATATAKING: pnt tr 113.38 14.7219872338 -CF 2008-Apr-25 20:58:58 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-25 20:58:58 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-25 20:58:58 LOG5 finish_task: Level: (3) ID = <10273> Status = 0 0 0 0 ok 2008-Apr-25 20:58:58 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-25 20:58:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 20:58:58 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-25 20:58:58 LOG5 end_task: Level: (3) ID = <10273> Status = 0 0 0 0 ok 2008-Apr-25 20:58:58 START begin_task: Starting task 'rotate ALFA to +88.3 degrees' 2008-Apr-25 20:58:58 LOG5 begin_task: Level: (3) ID = <10274> Status = 0 0 0 0 ok 2008-Apr-25 20:58:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +88.3 degrees ...} 2008-Apr-25 20:58:58 INFO2 rotate_alfa: ALFA commanded to +88.3 degrees 2008-Apr-25 20:58:58 LOG3 sock_errsend: To ALFAMOTOR: POSITION 88.3 REPLY 2008-Apr-25 20:58:58 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-25 20:58:58 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-25 20:58:58 LOG5 begin_task: Level: (4) ID = <10275> Status = 0 0 0 0 ok 2008-Apr-25 20:58:58 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_011" 2008-Apr-25 20:58:58 LOG4 got_cormsg: From DATATAKING: set ra 113.38 2008-Apr-25 20:58:58 LOG4 got_cormsg: From DATATAKING: set dec 14.7219872338 2008-Apr-25 20:58:58 LOG4 got_cormsg: From DATATAKING: vw% 113.38 2008-Apr-25 20:58:58 LOG4 got_cormsg: From DATATAKING: vw% 14.7219872338 2008-Apr-25 20:58:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 20:58:58 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-25 20:58:58 LOG4 got_cormsg: From DATATAKING: pnt tr 113.38 14.7219872338 -CF 2008-Apr-25 20:58:58 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-25 20:58:58 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-25 20:58:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 20:59:07 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-25 20:59:07 INFO3 alfa_motor: ALFA rotator in-position +88.30 degrees 2008-Apr-25 20:59:07 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-25 20:59:07 LOG5 end_task: Level: (4) ID = <10275> Status = 0 0 0 0 ok 2008-Apr-25 20:59:07 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-25 20:59:07 STOP finish_task: Finishing task 'rotate ALFA to +88.3 degrees' 2008-Apr-25 20:59:07 LOG5 finish_task: Level: (3) ID = <10274> Status = 0 0 0 0 ok 2008-Apr-25 20:59:07 INFO2 finish_task: DONE finished configuration: rotating ALFA to +88.3 degrees 2008-Apr-25 20:59:07 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 20:59:07 STOP end_task: Finishing task 'rotate ALFA to +88.3 degrees' with status 'OK' 2008-Apr-25 20:59:07 LOG5 end_task: Level: (3) ID = <10274> Status = 0 0 0 0 ok 2008-Apr-25 20:59:07 START begin_task: Starting task 'waiting on telescope' 2008-Apr-25 20:59:07 LOG5 begin_task: Level: (3) ID = <10276> Status = 0 0 0 0 ok 2008-Apr-25 20:59:07 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-25 20:59:07 LOG3 waittrk: Start waittrk 5 2008-Apr-25 20:59:07 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-25 20:59:07 LOG5 begin_task: Level: (4) ID = <10277> Status = 0 0 0 0 ok 2008-Apr-25 20:59:12 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-25 20:59:12 LOG5 end_task: Level: (4) ID = <10277> Status = 0 0 0 0 ok 2008-Apr-25 20:59:12 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-25 20:59:12 LOG5 begin_task: Level: (4) ID = <10278> Status = 0 0 0 0 ok 2008-Apr-25 21:01:03 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-25 21:01:03 LOG5 end_task: Level: (4) ID = <10278> Status = 0 0 0 0 ok 2008-Apr-25 21:01:03 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-25 21:01:03 INFO2 waittrk: Now tracking AGES3193_p2_011 2008-Apr-25 21:01:03 LOG4 waittrk: Current telescope position: Az = 113.14 ZA = 14.73 2008-Apr-25 21:01:03 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-25 21:01:03 LOG5 finish_task: Level: (3) ID = <10276> Status = 0 0 0 0 ok 2008-Apr-25 21:01:03 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-25 21:01:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 21:01:03 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-25 21:01:03 LOG5 end_task: Level: (3) ID = <10276> Status = 0 0 0 0 ok 2008-Apr-25 21:01:03 START begin_task: Starting task 'selecting calibration type' 2008-Apr-25 21:01:03 LOG5 begin_task: Level: (3) ID = <10279> Status = 0 0 0 0 ok 2008-Apr-25 21:01:03 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-25 21:01:03 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-25 21:01:03 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 21:01:03 START begin_task: Starting task 'waiting on setcal' 2008-Apr-25 21:01:03 LOG5 begin_task: Level: (4) ID = <10280> Status = 0 0 0 0 ok 2008-Apr-25 21:01:03 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-25 21:01:03 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 21:01:04 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 21:01:04 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-25 21:01:04 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-25 21:01:04 LOG5 end_task: Level: (4) ID = <10280> Status = 0 0 0 0 ok 2008-Apr-25 21:01:04 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-25 21:01:04 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 21:01:04 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-25 21:01:04 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 21:01:04 LOG5 begin_task: Level: (4) ID = <10281> Status = 0 0 0 0 ok 2008-Apr-25 21:01:04 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 21:01:04 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 21:01:04 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 21:01:04 LOG5 end_task: Level: (4) ID = <10281> Status = 0 0 0 0 ok 2008-Apr-25 21:01:04 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 21:01:04 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-25 21:01:04 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 21:01:04 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-25 21:01:04 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 21:01:04 LOG5 begin_task: Level: (4) ID = <10282> Status = 0 0 0 0 ok 2008-Apr-25 21:01:04 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 21:01:04 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 21:01:04 LOG5 end_task: Level: (4) ID = <10282> Status = 0 0 0 0 ok 2008-Apr-25 21:01:04 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 21:01:04 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-25 21:01:04 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-25 21:01:04 LOG5 finish_task: Level: (3) ID = <10279> Status = 0 0 0 0 ok 2008-Apr-25 21:01:04 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-25 21:01:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 21:01:04 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-25 21:01:04 LOG5 end_task: Level: (3) ID = <10279> Status = 0 0 0 0 ok 2008-Apr-25 21:01:04 LOG5 dopset_later: Calling 'dopset_later 47.993379223094777' 2008-Apr-25 21:01:04 INFO3 dopset_later: Setting Doppler correction for 21:01:52 (48 seconds from now) 2008-Apr-25 21:01:04 LOG5 antvel: Calling 'antvel 113.380000 14.721987 F 47.993379223094777' 2008-Apr-25 21:01:04 LOG2 antvel: Parameters to Doppler: Heliocentric 90112 2008 116 0.0 2008-Apr-25 21:01:04 INFO5 antvel: Computed antenna velocity: +27.93464 km/s 2008-Apr-25 21:01:04 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=27.934641043300001 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-25 21:01:04 INFO4 dopset_gen: New sky frequencies: 1381.114736 1381.114736 1381.114736 1381.114736 1381.114736 1381.114736 1381.114736 1381.114736 1381.114736 2008-Apr-25 21:01:04 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.114736 sky0=1381.114736 sky1=1381.114736 sky2=1381.114736 sky3=1381.114736 sky4=1381.114736 sky5=1381.114736 sky6=1381.114736 sky7=1381.114736 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-25 21:01:04 LOG2 dopset_gen: Result from 'sky2syn': 1631.114736 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-25 21:01:04 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631114736.0} 2008-Apr-25 21:01:04 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 21:01:04 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-25 21:01:04 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-25 21:01:04 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:16.1 Dec = +23:38:02.0 2008-Apr-25 21:01:04 LOG3 track_source: Calling 'track_source AGES3193_p2_011 095216.1 233802.0 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-25 21:01:04 START begin_task: Starting task 'sending tracking commands' 2008-Apr-25 21:01:04 LOG5 begin_task: Level: (3) ID = <10283> Status = 0 0 0 0 ok 2008-Apr-25 21:01:04 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_011} INFO {Slewing to source 'AGES3193_p2_011' ...} 2008-Apr-25 21:01:04 INFO1 track_source: Starting to track AGES3193_p2_011 2008-Apr-25 21:01:04 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_011" 2008-Apr-25 21:01:04 LOG3 vw_send: To DATATAKING: set ra 095216.1 2008-Apr-25 21:01:04 LOG3 vw_send: To DATATAKING: set dec 233802.0 2008-Apr-25 21:01:05 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-25 21:01:05 LOG3 vw_send: To DATATAKING: pnt tr 095216.1 233802.0 -CJ 2008-Apr-25 21:01:05 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-25 21:01:05 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-25 21:01:05 LOG5 finish_task: Level: (3) ID = <10283> Status = 0 0 0 0 ok 2008-Apr-25 21:01:05 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-25 21:01:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 21:01:05 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-25 21:01:05 LOG5 end_task: Level: (3) ID = <10283> Status = 0 0 0 0 ok 2008-Apr-25 21:01:05 START begin_task: Starting task 'waiting on telescope' 2008-Apr-25 21:01:05 LOG5 begin_task: Level: (3) ID = <10284> Status = 0 0 0 0 ok 2008-Apr-25 21:01:05 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-25 21:01:05 LOG3 waittrk: Start waittrk 5 2008-Apr-25 21:01:05 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-25 21:01:05 LOG5 begin_task: Level: (4) ID = <10285> Status = 0 0 0 0 ok 2008-Apr-25 21:01:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631114736.0} 2008-Apr-25 21:01:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 21:01:05 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_011" 2008-Apr-25 21:01:05 LOG4 got_cormsg: From DATATAKING: set ra 095216.1 2008-Apr-25 21:01:05 LOG4 got_cormsg: From DATATAKING: set dec 233802.0 2008-Apr-25 21:01:05 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-25 21:01:05 LOG4 got_cormsg: From DATATAKING: vw% 095216.1 2008-Apr-25 21:01:05 LOG4 got_cormsg: From DATATAKING: vw% 233802.0 2008-Apr-25 21:01:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 21:01:05 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-25 21:01:05 LOG4 got_cormsg: From DATATAKING: pnt tr 095216.1 233802.0 -CJ 2008-Apr-25 21:01:05 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-25 21:01:05 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-25 21:01:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 21:01:10 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-25 21:01:10 LOG5 end_task: Level: (4) ID = <10285> Status = 0 0 0 0 ok 2008-Apr-25 21:01:10 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-25 21:01:10 LOG5 begin_task: Level: (4) ID = <10286> Status = 0 0 0 0 ok 2008-Apr-25 21:01:12 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-25 21:01:12 LOG5 end_task: Level: (4) ID = <10286> Status = 0 0 0 0 ok 2008-Apr-25 21:01:12 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-25 21:01:12 INFO2 waittrk: Now tracking AGES3193_p2_011 2008-Apr-25 21:01:12 LOG4 waittrk: Current telescope position: Az = 113.12 ZA = 14.75 2008-Apr-25 21:01:12 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-25 21:01:12 LOG5 finish_task: Level: (3) ID = <10284> Status = 0 0 0 0 ok 2008-Apr-25 21:01:12 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-25 21:01:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 21:01:12 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-25 21:01:12 LOG5 end_task: Level: (3) ID = <10284> Status = 0 0 0 0 ok 2008-Apr-25 21:01:12 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-25 21:01:12 LOG5 begin_task: Level: (3) ID = <10287> Status = 0 0 0 0 ok 2008-Apr-25 21:01:12 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-25 21:01:12 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-25 21:01:12 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-25 21:01:12 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-25 21:01:12 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 21:01:12 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-25 21:01:12 LOG5 begin_task: Level: (4) ID = <10288> Status = 0 0 0 0 ok 2008-Apr-25 21:01:12 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-25 21:01:12 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 21:01:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 21:01:12 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-25 21:01:12 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-25 21:01:12 LOG5 end_task: Level: (4) ID = <10288> Status = 0 0 0 0 ok 2008-Apr-25 21:01:12 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-25 21:01:12 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-25 21:01:12 LOG5 begin_task: Level: (4) ID = <10289> Status = 0 0 0 0 ok 2008-Apr-25 21:01:12 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-25 21:01:12 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-25 21:01:12 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-25 21:01:12 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-25 21:01:12 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-25 21:01:12 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-25 21:01:12 LOG5 begin_task: Level: (5) ID = <10290> Status = 0 0 0 0 ok 2008-Apr-25 21:01:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 21:01:12 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-25 21:01:13 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 1 dB --- beam 1: 8 6 dB 2008-Apr-25 21:01:13 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 7 4 dB --- beam 3: 4 3 dB 2008-Apr-25 21:01:13 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 6 dB 2008-Apr-25 21:01:13 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 2 3 dB 2008-Apr-25 21:01:13 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-25 21:01:13 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-25 21:01:13 LOG5 end_task: Level: (5) ID = <10290> Status = 0 0 0 0 ok 2008-Apr-25 21:01:13 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.890 0.938 ALFA beam 1: 0.889 1.071 2008-Apr-25 21:01:13 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.902 1.012 ALFA beam 3: 1.042 1.046 2008-Apr-25 21:01:13 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.966 0.963 ALFA beam 5: 1.052 0.924 2008-Apr-25 21:01:13 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.008 1.027 ALFA beam 7: 1.102 0.909 2008-Apr-25 21:01:13 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-25 21:01:13 LOG5 finish_task: Level: (4) ID = <10289> Status = 0 0 0 0 ok 2008-Apr-25 21:01:13 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-25 21:01:13 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 21:01:13 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-25 21:01:13 LOG5 end_task: Level: (4) ID = <10289> Status = 0 0 0 0 ok 2008-Apr-25 21:01:13 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-25 21:01:13 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-25 21:01:13 LOG5 finish_task: Level: (3) ID = <10287> Status = 0 0 0 0 ok 2008-Apr-25 21:01:13 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-25 21:01:13 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 21:01:13 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-25 21:01:13 LOG5 end_task: Level: (3) ID = <10287> Status = 0 0 0 0 ok 2008-Apr-25 21:01:13 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 EM, RM 2008-Apr-25 21:01:13 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 EM, RM 2008-Apr-25 21:01:13 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 EM, RM 2008-Apr-25 21:01:13 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 EM, RM 2008-Apr-25 21:01:13 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-25 21:01:13 START begin_task: Starting task 'WAPP calibration' 2008-Apr-25 21:01:13 LOG5 begin_task: Level: (3) ID = <10291> Status = 0 0 0 0 ok 2008-Apr-25 21:01:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-25 21:01:13 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-25 21:01:13 START begin_task: Starting task 'selecting calibration type' 2008-Apr-25 21:01:13 LOG5 begin_task: Level: (4) ID = <10292> Status = 0 0 0 0 ok 2008-Apr-25 21:01:13 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-25 21:01:13 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-25 21:01:13 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 21:01:13 START begin_task: Starting task 'waiting on setcal' 2008-Apr-25 21:01:13 LOG5 begin_task: Level: (5) ID = <10293> Status = 0 0 0 0 ok 2008-Apr-25 21:01:13 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 EM, RM' 2008-Apr-25 21:01:13 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-25 21:01:13 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 21:01:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 21:01:14 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-25 21:01:14 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-25 21:01:14 LOG5 end_task: Level: (5) ID = <10293> Status = 0 0 0 0 ok 2008-Apr-25 21:01:14 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-25 21:01:14 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 21:01:14 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-25 21:01:14 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 21:01:14 LOG5 begin_task: Level: (5) ID = <10294> Status = 0 0 0 0 ok 2008-Apr-25 21:01:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 21:01:14 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 21:01:14 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 21:01:14 LOG5 end_task: Level: (5) ID = <10294> Status = 0 0 0 0 ok 2008-Apr-25 21:01:14 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 21:01:14 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-25 21:01:14 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 21:01:14 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-25 21:01:14 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 21:01:14 LOG5 begin_task: Level: (5) ID = <10295> Status = 0 0 0 0 ok 2008-Apr-25 21:01:14 NOTE WAPPDATA-new_file: New FITS file: wapp.20080425.a2048.0006.fits 2008-Apr-25 21:01:14 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 21:01:14 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 21:01:14 LOG5 end_task: Level: (5) ID = <10295> Status = 0 0 0 0 ok 2008-Apr-25 21:01:14 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 21:01:14 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-25 21:01:14 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-25 21:01:14 LOG5 finish_task: Level: (4) ID = <10292> Status = 0 0 0 0 ok 2008-Apr-25 21:01:14 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-25 21:01:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 21:01:14 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-25 21:01:14 LOG5 end_task: Level: (4) ID = <10292> Status = 0 0 0 0 ok 2008-Apr-25 21:01:14 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-25 21:01:14 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-25 21:01:14 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-25 21:01:14 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-25 21:01:14 LOG5 begin_task: Level: (4) ID = <10296> Status = 0 0 0 0 ok 2008-Apr-25 21:01:14 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080425.a2048.0006.fits} 2008-Apr-25 21:01:14 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-25 21:01:14 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-25 21:01:14 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-25 21:01:14 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-25 21:01:14 LOG5 end_task: Level: (4) ID = <10296> Status = 0 0 0 0 ok 2008-Apr-25 21:01:14 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-25 21:01:14 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-25 21:01:14 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-25 21:01:14 LOG5 begin_task: Level: (4) ID = <10297> Status = 0 0 0 0 ok 2008-Apr-25 21:01:14 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-25 21:01:14 LOG5 log_alfabeam: Parameters: 9.8711388888888916 23.633888888888887 10.863735 2008.3199886239763 88.299911 2008-Apr-25 21:01:14 LOG4 log_alfabeam: ALFABEAM 0 9.871138888888893 23.633888888888890 2008-Apr-25 21:01:14 LOG4 log_alfabeam: ALFABEAM 1 9.873287394440839 23.542812446386794 2008-Apr-25 21:01:14 LOG4 log_alfabeam: ALFABEAM 2 9.878576569977255 23.603450329039084 2008-Apr-25 21:01:14 LOG4 log_alfabeam: ALFABEAM 3 9.876460253021589 23.694451472847042 2008-Apr-25 21:01:14 LOG4 log_alfabeam: ALFABEAM 4 9.869028179358335 23.725384666405581 2008-Apr-25 21:01:14 LOG4 log_alfabeam: ALFABEAM 5 9.863696926336283 23.664210994907776 2008-Apr-25 21:01:14 LOG4 log_alfabeam: ALFABEAM 6 9.865840049807014 23.572639450871915 2008-Apr-25 21:01:14 INFO2 take_spectra: Starting WAPP scan: 811600117 2008-Apr-25 21:01:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-25 21:01:15 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-25 21:01:15 LOG5 begin_task: Level: (5) ID = <10298> Status = 0 0 0 0 ok 2008-Apr-25 21:01:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 21:01:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3676.00 2008-Apr-25 21:01:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.114736 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 21:01:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.114736 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 21:01:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.114736 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 21:01:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.114736 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 21:01:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.114736 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 21:01:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.431 > 1.4)! 2008-Apr-25 21:01:21 LOG4 check_wapp_levels: WAPP-1 power levels: 0.890 0.938 0.889 1.071 2008-Apr-25 21:01:21 LOG4 check_wapp_levels: WAPP-2 power levels: 1.201 1.378 1.427 1.431 2008-Apr-25 21:01:21 LOG4 check_wapp_levels: WAPP-3 power levels: 0.966 0.963 1.052 0.924 2008-Apr-25 21:01:21 LOG4 check_wapp_levels: WAPP-4 power levels: 1.008 1.027 1.102 0.909 2008-Apr-25 21:01:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.114736 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 21:01:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.114736 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 21:01:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.114736 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 21:01:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.114736 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 21:01:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 21:01:21 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-25 21:01:21 LOG5 end_task: Level: (5) ID = <10298> Status = 0 0 0 0 ok 2008-Apr-25 21:01:21 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-25 21:01:21 LOG5 end_task: Level: (4) ID = <10297> Status = 0 0 0 0 ok 2008-Apr-25 21:01:21 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-25 21:01:21 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-25 21:01:21 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-25 21:01:21 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-25 21:01:21 LOG5 begin_task: Level: (4) ID = <10299> Status = 0 0 0 0 ok 2008-Apr-25 21:01:22 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-25 21:01:22 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-25 21:01:22 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-25 21:01:22 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-25 21:01:22 LOG5 end_task: Level: (4) ID = <10299> Status = 0 0 0 0 ok 2008-Apr-25 21:01:22 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-25 21:01:22 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-25 21:01:22 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-25 21:01:22 LOG5 begin_task: Level: (4) ID = <10300> Status = 0 0 0 0 ok 2008-Apr-25 21:01:22 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-25 21:01:22 LOG5 log_alfabeam: Parameters: 9.8711388888888916 23.633888888888887 10.865964 2008.3199888774811 88.299911 2008-Apr-25 21:01:22 LOG4 log_alfabeam: ALFABEAM 0 9.871138888888890 23.633888888888894 2008-Apr-25 21:01:22 LOG4 log_alfabeam: ALFABEAM 1 9.873293055531731 23.542837463553916 2008-Apr-25 21:01:22 LOG4 log_alfabeam: ALFABEAM 2 9.878578477609045 23.603538394953034 2008-Apr-25 21:01:22 LOG4 log_alfabeam: ALFABEAM 3 9.876456437407382 23.694515089789125 2008-Apr-25 21:01:22 LOG4 log_alfabeam: ALFABEAM 4 9.869022400393145 23.725359217015487 2008-Apr-25 21:01:22 LOG4 log_alfabeam: ALFABEAM 5 9.863695031831748 23.664122953946805 2008-Apr-25 21:01:22 LOG4 log_alfabeam: ALFABEAM 6 9.865843871098216 23.572577432966249 2008-Apr-25 21:01:22 INFO2 take_spectra: Starting WAPP scan: 811600118 2008-Apr-25 21:01:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-25 21:01:22 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-25 21:01:22 LOG5 begin_task: Level: (5) ID = <10301> Status = 0 0 0 0 ok 2008-Apr-25 21:01:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 21:01:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3683.00 2008-Apr-25 21:01:27 INFO5 check_wapp_levels: WAPP power levels are between 1.196 and 1.556 (still bad) 2008-Apr-25 21:01:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.114736 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 21:01:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.114736 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 21:01:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.114736 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 21:01:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.114736 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 21:01:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.114736 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 21:01:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.114736 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 21:01:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.114736 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 21:01:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.114736 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 21:01:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.114736 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 21:01:28 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-25 21:01:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 21:01:28 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-25 21:01:28 LOG5 end_task: Level: (5) ID = <10301> Status = 0 0 0 0 ok 2008-Apr-25 21:01:28 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-25 21:01:28 LOG5 end_task: Level: (4) ID = <10300> Status = 0 0 0 0 ok 2008-Apr-25 21:01:28 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-25 21:01:28 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-25 21:01:28 LOG5 finish_task: Level: (3) ID = <10291> Status = 0 0 0 0 ok 2008-Apr-25 21:01:28 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-25 21:01:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 21:01:28 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-25 21:01:28 LOG5 end_task: Level: (3) ID = <10291> Status = 0 0 0 0 ok 2008-Apr-25 21:01:29 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-25 21:01:29 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 113.38 and ZA = 14.72 2008-Apr-25 21:01:29 LOG3 track_source: Calling 'track_source AGES3193_p2_011 113.38 14.7219872338 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-25 21:01:29 START begin_task: Starting task 'sending tracking commands' 2008-Apr-25 21:01:29 LOG5 begin_task: Level: (3) ID = <10302> Status = 0 0 0 0 ok 2008-Apr-25 21:01:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_011} INFO {Slewing to source 'AGES3193_p2_011' ...} 2008-Apr-25 21:01:29 INFO1 track_source: Starting to track AGES3193_p2_011 2008-Apr-25 21:01:29 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_011" 2008-Apr-25 21:01:29 LOG3 vw_send: To DATATAKING: set ra 113.38 2008-Apr-25 21:01:29 LOG3 vw_send: To DATATAKING: set dec 14.7219872338 2008-Apr-25 21:01:29 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-25 21:01:29 LOG3 vw_send: To DATATAKING: pnt tr 113.38 14.7219872338 -CF 2008-Apr-25 21:01:29 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-25 21:01:29 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-25 21:01:29 LOG5 finish_task: Level: (3) ID = <10302> Status = 0 0 0 0 ok 2008-Apr-25 21:01:29 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-25 21:01:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 21:01:29 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-25 21:01:29 LOG5 end_task: Level: (3) ID = <10302> Status = 0 0 0 0 ok 2008-Apr-25 21:01:29 LOG1 fixed_driftmap: Parameters: HA = +00:58:59.2 Start = 10:52:28.5 LST = 10:52:04.5 diff = 24.1 secs 2008-Apr-25 21:01:29 INFO2 fixed_driftmap: Waiting 22.1 seconds for RA 9:53:29 2008-Apr-25 21:01:29 INFO2 lstwait: Waiting for 22 secs from LST 10:52:04 to LST 10:52:27 ... 2008-Apr-25 21:01:29 LOG4 send_obs_status: To obs_status: <1> TASKTIME 22.00214000005478 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-25 21:01:29 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-25 21:01:29 LOG5 begin_task: Level: (3) ID = <10303> Status = 0 0 0 0 ok 2008-Apr-25 21:01:29 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_011" 2008-Apr-25 21:01:29 LOG4 got_cormsg: From DATATAKING: set ra 113.38 2008-Apr-25 21:01:29 LOG4 got_cormsg: From DATATAKING: set dec 14.7219872338 2008-Apr-25 21:01:29 LOG4 got_cormsg: From DATATAKING: vw% 113.38 2008-Apr-25 21:01:29 LOG4 got_cormsg: From DATATAKING: vw% 14.7219872338 2008-Apr-25 21:01:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 21:01:29 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-25 21:01:29 LOG4 got_cormsg: From DATATAKING: pnt tr 113.38 14.7219872338 -CF 2008-Apr-25 21:01:29 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-25 21:01:29 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-25 21:01:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 21:01:33 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.892 and 1.103 2008-Apr-25 21:01:51 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-25 21:01:51 LOG5 end_task: Level: (3) ID = <10303> Status = 0 0 0 0 ok 2008-Apr-25 21:01:51 LOG4 lstwait: Finished waiting, the gui caused difference: 1.0028208800001437 2008-Apr-25 21:01:51 INFO3 lstwait: Finished waiting 2008-Apr-25 21:01:51 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-25 21:01:51 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-25 21:01:51 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-25 21:01:51 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-25 21:01:51 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-25 21:01:51 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-25 21:01:51 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-25 21:01:51 LOG5 begin_task: Level: (3) ID = <10304> Status = 0 0 0 0 ok 2008-Apr-25 21:01:51 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-25 21:01:51 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-25 21:01:51 INFO2 take_spectra: Starting WAPP scan: 811600119 2008-Apr-25 21:01:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-25 21:01:52 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-25 21:01:52 LOG5 begin_task: Level: (4) ID = <10305> Status = 0 0 0 0 ok 2008-Apr-25 21:01:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 21:01:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3713.00 2008-Apr-25 21:01:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.114736 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 21:01:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.114736 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 21:01:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.114736 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 21:01:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.114736 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 21:01:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.114736 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 21:01:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.114736 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 21:01:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.114736 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 21:01:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.114736 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 21:01:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.114736 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 21:06:52 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 21:06:52.295 (seconds: 76012.295)!} 2008-Apr-25 21:06:52 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 21:06:52.295 (seconds: 76012.295)! 2008-Apr-25 21:06:53 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 76011.0 to 76012.0! 2008-Apr-25 21:06:54 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (76011.0 - 76013.0)! 2008-Apr-25 21:16:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (6.612 > 1.4)! 2008-Apr-25 21:16:56 LOG4 check_wapp_levels: WAPP-1 power levels: 0.912 6.612 0.887 1.072 2008-Apr-25 21:16:56 LOG4 check_wapp_levels: WAPP-2 power levels: 0.896 1.010 1.040 1.040 2008-Apr-25 21:16:56 LOG4 check_wapp_levels: WAPP-3 power levels: 0.945 0.951 1.039 0.918 2008-Apr-25 21:16:56 LOG4 check_wapp_levels: WAPP-4 power levels: 1.005 1.021 1.096 0.903 2008-Apr-25 21:16:58 INFO5 check_wapp_levels: WAPP power levels are between 0.886 and 6.608 (still bad) 2008-Apr-25 21:17:00 INFO5 check_wapp_levels: WAPP power levels are between 0.888 and 6.592 (still bad) 2008-Apr-25 21:17:02 INFO5 check_wapp_levels: WAPP power levels are between 0.891 and 6.603 (still bad) 2008-Apr-25 21:17:04 INFO5 check_wapp_levels: WAPP power levels are between 0.888 and 6.610 (still bad) 2008-Apr-25 21:17:06 INFO5 check_wapp_levels: WAPP power levels are between 0.885 and 6.606 (still bad) 2008-Apr-25 21:17:08 INFO5 check_wapp_levels: WAPP power levels are between 0.886 and 6.611 (still bad) 2008-Apr-25 21:17:10 INFO5 check_wapp_levels: WAPP power levels are between 0.885 and 6.626 (still bad) 2008-Apr-25 21:17:12 INFO5 check_wapp_levels: WAPP power levels are between 0.890 and 6.628 (still bad) 2008-Apr-25 21:17:14 INFO5 check_wapp_levels: WAPP power levels are between 0.888 and 6.627 (still bad) 2008-Apr-25 21:17:17 INFO5 check_wapp_levels: WAPP power levels are between 0.887 and 6.626 (still bad) 2008-Apr-25 21:17:19 INFO5 check_wapp_levels: WAPP power levels are between 0.885 and 6.613 (still bad) 2008-Apr-25 21:17:21 INFO5 check_wapp_levels: WAPP power levels are between 0.884 and 6.623 (still bad) 2008-Apr-25 21:17:23 INFO5 check_wapp_levels: WAPP power levels are between 0.883 and 6.614 (still bad) 2008-Apr-25 21:17:25 INFO5 check_wapp_levels: WAPP power levels are between 0.890 and 6.615 (still bad) 2008-Apr-25 21:17:27 INFO5 check_wapp_levels: WAPP power levels are between 0.888 and 6.621 (still bad) 2008-Apr-25 21:17:29 INFO5 check_wapp_levels: WAPP power levels are between 0.887 and 6.633 (still bad) 2008-Apr-25 21:17:31 INFO5 check_wapp_levels: WAPP power levels are between 0.885 and 6.654 (still bad) 2008-Apr-25 21:17:33 INFO5 check_wapp_levels: WAPP power levels are between 0.886 and 6.652 (still bad) 2008-Apr-25 21:17:35 INFO5 check_wapp_levels: WAPP power levels are between 0.889 and 6.651 (still bad) 2008-Apr-25 21:17:37 INFO5 check_wapp_levels: WAPP power levels are between 0.891 and 6.665 (still bad) 2008-Apr-25 21:17:39 INFO5 check_wapp_levels: WAPP power levels are between 0.889 and 6.658 (still bad) 2008-Apr-25 21:17:41 INFO5 check_wapp_levels: WAPP power levels are between 0.888 and 6.642 (still bad) 2008-Apr-25 21:17:43 INFO5 check_wapp_levels: WAPP power levels are between 0.886 and 6.636 (still bad) 2008-Apr-25 21:17:45 INFO5 check_wapp_levels: WAPP power levels are between 0.884 and 6.635 (still bad) 2008-Apr-25 21:17:47 INFO5 check_wapp_levels: WAPP power levels are between 0.885 and 6.610 (still bad) 2008-Apr-25 21:17:49 INFO5 check_wapp_levels: WAPP power levels are between 0.888 and 6.620 (still bad) 2008-Apr-25 21:17:51 INFO5 check_wapp_levels: WAPP power levels are between 0.887 and 6.617 (still bad) 2008-Apr-25 21:17:53 INFO5 check_wapp_levels: WAPP power levels are between 0.886 and 6.623 (still bad) 2008-Apr-25 21:17:55 INFO5 check_wapp_levels: WAPP power levels are between 0.885 and 6.629 (still bad) 2008-Apr-25 21:17:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (6.631 > 1.4)! 2008-Apr-25 21:17:57 LOG4 check_wapp_levels: WAPP-1 power levels: 0.912 6.631 0.884 1.072 2008-Apr-25 21:17:57 LOG4 check_wapp_levels: WAPP-2 power levels: 0.893 1.008 1.041 1.040 2008-Apr-25 21:17:57 LOG4 check_wapp_levels: WAPP-3 power levels: 0.948 0.951 1.057 0.938 2008-Apr-25 21:17:57 LOG4 check_wapp_levels: WAPP-4 power levels: 1.011 1.026 1.100 0.907 2008-Apr-25 21:17:59 INFO5 check_wapp_levels: WAPP power levels are between 0.884 and 6.634 (still bad) 2008-Apr-25 21:18:01 INFO5 check_wapp_levels: WAPP power levels are between 0.892 and 6.620 (still bad) 2008-Apr-25 21:18:03 INFO5 check_wapp_levels: WAPP power levels are between 0.890 and 6.627 (still bad) 2008-Apr-25 21:18:05 INFO5 check_wapp_levels: WAPP power levels are between 0.888 and 6.621 (still bad) 2008-Apr-25 21:18:07 INFO5 check_wapp_levels: WAPP power levels are between 0.888 and 6.613 (still bad) 2008-Apr-25 21:18:09 INFO5 check_wapp_levels: WAPP power levels are between 0.886 and 6.616 (still bad) 2008-Apr-25 21:18:11 INFO5 check_wapp_levels: WAPP power levels are between 0.884 and 6.630 (still bad) 2008-Apr-25 21:18:13 INFO5 check_wapp_levels: WAPP power levels are between 0.889 and 6.633 (still bad) 2008-Apr-25 21:18:15 INFO5 check_wapp_levels: WAPP power levels are between 0.888 and 6.634 (still bad) 2008-Apr-25 21:18:17 INFO5 check_wapp_levels: WAPP power levels are between 0.886 and 6.630 (still bad) 2008-Apr-25 21:18:19 INFO5 check_wapp_levels: WAPP power levels are between 0.886 and 6.631 (still bad) 2008-Apr-25 21:18:21 INFO5 check_wapp_levels: WAPP power levels are between 0.884 and 6.632 (still bad) 2008-Apr-25 21:18:23 INFO5 check_wapp_levels: WAPP power levels are between 0.883 and 6.620 (still bad) 2008-Apr-25 21:18:25 INFO5 check_wapp_levels: WAPP power levels are between 0.889 and 6.623 (still bad) 2008-Apr-25 21:18:27 INFO5 check_wapp_levels: WAPP power levels are between 0.887 and 6.620 (still bad) 2008-Apr-25 21:18:29 INFO5 check_wapp_levels: WAPP power levels are between 0.886 and 6.635 (still bad) 2008-Apr-25 21:18:31 INFO5 check_wapp_levels: WAPP power levels are between 0.884 and 6.620 (still bad) 2008-Apr-25 21:18:33 INFO5 check_wapp_levels: WAPP power levels are between 0.884 and 6.623 (still bad) 2008-Apr-25 21:18:35 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 6.619 (still bad) 2008-Apr-25 21:18:37 INFO5 check_wapp_levels: WAPP power levels are between 0.889 and 6.628 (still bad) 2008-Apr-25 21:18:39 INFO5 check_wapp_levels: WAPP power levels are between 0.888 and 6.624 (still bad) 2008-Apr-25 21:18:41 INFO5 check_wapp_levels: WAPP power levels are between 0.885 and 6.619 (still bad) 2008-Apr-25 21:18:43 INFO5 check_wapp_levels: WAPP power levels are between 0.884 and 6.610 (still bad) 2008-Apr-25 21:18:46 INFO5 check_wapp_levels: WAPP power levels are between 0.885 and 6.624 (still bad) 2008-Apr-25 21:18:48 INFO5 check_wapp_levels: WAPP power levels are between 0.889 and 6.627 (still bad) 2008-Apr-25 21:18:50 INFO5 check_wapp_levels: WAPP power levels are between 0.888 and 6.626 (still bad) 2008-Apr-25 21:18:52 INFO5 check_wapp_levels: WAPP power levels are between 0.886 and 6.613 (still bad) 2008-Apr-25 21:18:54 INFO5 check_wapp_levels: WAPP power levels are between 0.885 and 6.622 (still bad) 2008-Apr-25 21:18:56 INFO5 check_wapp_levels: WAPP power levels are between 0.885 and 6.629 (still bad) 2008-Apr-25 21:18:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (6.633 > 1.4)! 2008-Apr-25 21:18:58 LOG4 check_wapp_levels: WAPP-1 power levels: 0.914 6.633 0.884 1.075 2008-Apr-25 21:18:58 LOG4 check_wapp_levels: WAPP-2 power levels: 0.893 1.009 1.038 1.038 2008-Apr-25 21:18:58 LOG4 check_wapp_levels: WAPP-3 power levels: 0.946 0.951 1.036 0.920 2008-Apr-25 21:18:58 LOG4 check_wapp_levels: WAPP-4 power levels: 1.004 1.022 1.097 0.903 2008-Apr-25 21:19:00 INFO5 check_wapp_levels: WAPP power levels are between 0.892 and 6.639 (still bad) 2008-Apr-25 21:19:02 INFO5 check_wapp_levels: WAPP power levels are between 0.890 and 6.634 (still bad) 2008-Apr-25 21:19:04 INFO5 check_wapp_levels: WAPP power levels are between 0.888 and 6.636 (still bad) 2008-Apr-25 21:19:06 INFO5 check_wapp_levels: WAPP power levels are between 0.887 and 6.627 (still bad) 2008-Apr-25 21:19:08 INFO5 check_wapp_levels: WAPP power levels are between 0.885 and 6.638 (still bad) 2008-Apr-25 21:19:10 INFO5 check_wapp_levels: WAPP power levels are between 0.885 and 6.635 (still bad) 2008-Apr-25 21:19:12 INFO5 check_wapp_levels: WAPP power levels are between 0.892 and 6.642 (still bad) 2008-Apr-25 21:19:14 INFO5 check_wapp_levels: WAPP power levels are between 0.889 and 6.640 (still bad) 2008-Apr-25 21:19:16 INFO5 check_wapp_levels: WAPP power levels are between 0.888 and 6.637 (still bad) 2008-Apr-25 21:19:18 INFO5 check_wapp_levels: WAPP power levels are between 0.886 and 6.636 (still bad) 2008-Apr-25 21:19:20 INFO5 check_wapp_levels: WAPP power levels are between 0.886 and 6.627 (still bad) 2008-Apr-25 21:19:22 INFO5 check_wapp_levels: WAPP power levels are between 0.884 and 6.611 (still bad) 2008-Apr-25 21:19:24 INFO5 check_wapp_levels: WAPP power levels are between 0.889 and 6.620 (still bad) 2008-Apr-25 21:19:26 INFO5 check_wapp_levels: WAPP power levels are between 0.889 and 6.619 (still bad) 2008-Apr-25 21:19:28 INFO5 check_wapp_levels: WAPP power levels are between 0.887 and 6.624 (still bad) 2008-Apr-25 21:19:30 INFO5 check_wapp_levels: WAPP power levels are between 0.885 and 6.630 (still bad) 2008-Apr-25 21:19:32 INFO5 check_wapp_levels: WAPP power levels are between 0.883 and 6.632 (still bad) 2008-Apr-25 21:19:34 INFO5 check_wapp_levels: WAPP power levels are between 0.883 and 6.634 (still bad) 2008-Apr-25 21:19:36 INFO5 check_wapp_levels: WAPP power levels are between 0.889 and 6.612 (still bad) 2008-Apr-25 21:19:38 INFO5 check_wapp_levels: WAPP power levels are between 0.888 and 6.615 (still bad) 2008-Apr-25 21:19:40 INFO5 check_wapp_levels: WAPP power levels are between 0.887 and 6.623 (still bad) 2008-Apr-25 21:19:42 INFO5 check_wapp_levels: WAPP power levels are between 0.886 and 6.617 (still bad) 2008-Apr-25 21:19:44 INFO5 check_wapp_levels: WAPP power levels are between 0.885 and 6.624 (still bad) 2008-Apr-25 21:19:46 INFO5 check_wapp_levels: WAPP power levels are between 0.883 and 6.627 (still bad) 2008-Apr-25 21:19:48 INFO5 check_wapp_levels: WAPP power levels are between 0.891 and 6.614 (still bad) 2008-Apr-25 21:19:50 INFO5 check_wapp_levels: WAPP power levels are between 0.889 and 6.624 (still bad) 2008-Apr-25 21:19:52 INFO5 check_wapp_levels: WAPP power levels are between 0.888 and 6.616 (still bad) 2008-Apr-25 21:19:54 INFO5 check_wapp_levels: WAPP power levels are between 0.886 and 6.618 (still bad) 2008-Apr-25 21:19:56 INFO5 check_wapp_levels: WAPP power levels are between 0.885 and 6.622 (still bad) 2008-Apr-25 21:19:58 INFO5 check_wapp_levels: WAPP power levels are between 0.883 and 6.621 (still bad) 2008-Apr-25 21:20:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (6.616 > 1.4)! 2008-Apr-25 21:20:00 LOG4 check_wapp_levels: WAPP-1 power levels: 0.911 6.616 0.889 1.073 2008-Apr-25 21:20:00 LOG4 check_wapp_levels: WAPP-2 power levels: 0.894 1.008 1.037 1.038 2008-Apr-25 21:20:00 LOG4 check_wapp_levels: WAPP-3 power levels: 0.946 0.947 1.040 0.915 2008-Apr-25 21:20:00 LOG4 check_wapp_levels: WAPP-4 power levels: 1.002 1.022 1.096 0.902 2008-Apr-25 21:20:02 INFO5 check_wapp_levels: WAPP power levels are between 0.888 and 6.619 (still bad) 2008-Apr-25 21:20:04 INFO5 check_wapp_levels: WAPP power levels are between 0.886 and 6.630 (still bad) 2008-Apr-25 21:20:06 INFO5 check_wapp_levels: WAPP power levels are between 0.886 and 6.626 (still bad) 2008-Apr-25 21:20:09 INFO5 check_wapp_levels: WAPP power levels are between 0.884 and 6.635 (still bad) 2008-Apr-25 21:20:11 INFO5 check_wapp_levels: WAPP power levels are between 0.883 and 6.635 (still bad) 2008-Apr-25 21:20:13 INFO5 check_wapp_levels: WAPP power levels are between 0.889 and 6.639 (still bad) 2008-Apr-25 21:20:15 INFO5 check_wapp_levels: WAPP power levels are between 0.886 and 6.643 (still bad) 2008-Apr-25 21:20:17 INFO5 check_wapp_levels: WAPP power levels are between 0.884 and 6.619 (still bad) 2008-Apr-25 21:20:19 INFO5 check_wapp_levels: WAPP power levels are between 0.883 and 6.636 (still bad) 2008-Apr-25 21:20:21 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 6.620 (still bad) 2008-Apr-25 21:20:23 INFO5 check_wapp_levels: WAPP power levels are between 0.880 and 6.622 (still bad) 2008-Apr-25 21:20:25 INFO5 check_wapp_levels: WAPP power levels are between 0.888 and 6.632 (still bad) 2008-Apr-25 21:20:27 INFO5 check_wapp_levels: WAPP power levels are between 0.885 and 6.613 (still bad) 2008-Apr-25 21:20:29 INFO5 check_wapp_levels: WAPP power levels are between 0.884 and 6.612 (still bad) 2008-Apr-25 21:20:31 INFO5 check_wapp_levels: WAPP power levels are between 0.883 and 6.604 (still bad) 2008-Apr-25 21:20:33 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 6.605 (still bad) 2008-Apr-25 21:20:35 INFO5 check_wapp_levels: WAPP power levels are between 0.883 and 6.607 (still bad) 2008-Apr-25 21:20:37 INFO5 check_wapp_levels: WAPP power levels are between 0.887 and 6.618 (still bad) 2008-Apr-25 21:20:39 INFO5 check_wapp_levels: WAPP power levels are between 0.886 and 6.610 (still bad) 2008-Apr-25 21:20:41 INFO5 check_wapp_levels: WAPP power levels are between 0.884 and 6.609 (still bad) 2008-Apr-25 21:20:43 INFO5 check_wapp_levels: WAPP power levels are between 0.883 and 6.609 (still bad) 2008-Apr-25 21:20:45 INFO5 check_wapp_levels: WAPP power levels are between 0.881 and 6.608 (still bad) 2008-Apr-25 21:20:47 INFO5 check_wapp_levels: WAPP power levels are between 0.883 and 6.611 (still bad) 2008-Apr-25 21:20:49 INFO5 check_wapp_levels: WAPP power levels are between 0.889 and 6.614 (still bad) 2008-Apr-25 21:20:51 INFO5 check_wapp_levels: WAPP power levels are between 0.887 and 6.621 (still bad) 2008-Apr-25 21:20:53 INFO5 check_wapp_levels: WAPP power levels are between 0.885 and 6.623 (still bad) 2008-Apr-25 21:20:55 INFO5 check_wapp_levels: WAPP power levels are between 0.885 and 6.614 (still bad) 2008-Apr-25 21:20:57 INFO5 check_wapp_levels: WAPP power levels are between 0.884 and 6.617 (still bad) 2008-Apr-25 21:20:59 INFO5 check_wapp_levels: WAPP power levels are between 0.884 and 6.591 (still bad) 2008-Apr-25 21:21:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (6.610 > 1.4)! 2008-Apr-25 21:21:01 LOG4 check_wapp_levels: WAPP-1 power levels: 0.911 6.610 0.890 1.073 2008-Apr-25 21:21:01 LOG4 check_wapp_levels: WAPP-2 power levels: 0.896 1.009 1.037 1.038 2008-Apr-25 21:21:01 LOG4 check_wapp_levels: WAPP-3 power levels: 0.946 0.948 1.040 0.917 2008-Apr-25 21:21:01 LOG4 check_wapp_levels: WAPP-4 power levels: 1.003 1.020 1.095 0.901 2008-Apr-25 21:21:03 INFO5 check_wapp_levels: WAPP power levels are between 0.888 and 6.618 (still bad) 2008-Apr-25 21:21:05 INFO5 check_wapp_levels: WAPP power levels are between 0.885 and 6.620 (still bad) 2008-Apr-25 21:21:07 INFO5 check_wapp_levels: WAPP power levels are between 0.884 and 6.612 (still bad) 2008-Apr-25 21:21:09 INFO5 check_wapp_levels: WAPP power levels are between 0.884 and 6.611 (still bad) 2008-Apr-25 21:21:11 INFO5 check_wapp_levels: WAPP power levels are between 0.884 and 6.592 (still bad) 2008-Apr-25 21:21:13 INFO5 check_wapp_levels: WAPP power levels are between 0.890 and 6.614 (still bad) 2008-Apr-25 21:21:15 INFO5 check_wapp_levels: WAPP power levels are between 0.889 and 6.612 (still bad) 2008-Apr-25 21:21:17 INFO5 check_wapp_levels: WAPP power levels are between 0.889 and 6.609 (still bad) 2008-Apr-25 21:21:19 INFO5 check_wapp_levels: WAPP power levels are between 0.889 and 6.615 (still bad) 2008-Apr-25 21:21:21 INFO5 check_wapp_levels: WAPP power levels are between 0.888 and 6.620 (still bad) 2008-Apr-25 21:21:23 INFO5 check_wapp_levels: WAPP power levels are between 0.889 and 6.628 (still bad) 2008-Apr-25 21:21:25 INFO5 check_wapp_levels: WAPP power levels are between 0.892 and 6.625 (still bad) 2008-Apr-25 21:21:27 INFO5 check_wapp_levels: WAPP power levels are between 0.893 and 6.635 (still bad) 2008-Apr-25 21:21:29 INFO5 check_wapp_levels: WAPP power levels are between 0.893 and 6.641 (still bad) 2008-Apr-25 21:21:31 INFO5 check_wapp_levels: WAPP power levels are between 0.893 and 6.639 (still bad) 2008-Apr-25 21:21:34 INFO5 check_wapp_levels: WAPP power levels are between 0.892 and 6.641 (still bad) 2008-Apr-25 21:21:36 INFO5 check_wapp_levels: WAPP power levels are between 0.892 and 6.621 (still bad) 2008-Apr-25 21:21:38 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 6.631 (still bad) 2008-Apr-25 21:21:40 INFO5 check_wapp_levels: WAPP power levels are between 0.892 and 6.626 (still bad) 2008-Apr-25 21:21:42 INFO5 check_wapp_levels: WAPP power levels are between 0.891 and 6.610 (still bad) 2008-Apr-25 21:21:44 INFO5 check_wapp_levels: WAPP power levels are between 0.890 and 6.630 (still bad) 2008-Apr-25 21:21:46 INFO5 check_wapp_levels: WAPP power levels are between 0.886 and 6.616 (still bad) 2008-Apr-25 21:21:48 INFO5 check_wapp_levels: WAPP power levels are between 0.884 and 6.604 (still bad) 2008-Apr-25 21:21:50 INFO5 check_wapp_levels: WAPP power levels are between 0.888 and 6.612 (still bad) 2008-Apr-25 21:21:51 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 21:21:51.315 (seconds: 76911.315)!} 2008-Apr-25 21:21:51 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 21:21:51.315 (seconds: 76911.315)! 2008-Apr-25 21:21:52 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 76910.0 to 76911.0! 2008-Apr-25 21:21:52 INFO5 check_wapp_levels: WAPP power levels are between 0.887 and 6.608 (still bad) 2008-Apr-25 21:21:53 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (76910.0 - 76912.0)! 2008-Apr-25 21:21:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 21:21:53 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-25 21:21:53 LOG5 end_task: Level: (4) ID = <10305> Status = 0 0 0 0 ok 2008-Apr-25 21:21:53 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-25 21:21:53 LOG5 end_task: Level: (3) ID = <10304> Status = 0 0 0 0 ok 2008-Apr-25 21:21:53 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-25 21:21:53 LOG5 finish_task: Level: (2) ID = <10272> Status = 0 0 0 0 ok 2008-Apr-25 21:21:53 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-25 21:21:53 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-25 21:21:53 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-25 21:21:53 LOG5 end_task: Level: (2) ID = <10272> Status = 0 0 0 0 ok 2008-Apr-25 21:21:53 COMMAND run_command_line: EXECUTING command 31: 'FIXEDDRIFT az=312.64 alfaangle=59.5 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_059 ra=120900.00 dec=73300.00' 2008-Apr-25 21:21:53 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-25 21:21:54 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-25 21:21:54 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 312.64 59.5 hcorcal 5 tracking no first 1 AGESVC1A_p2_059 120900.00 73300.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-25 21:21:54 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-25 21:21:54 LOG5 begin_task: Level: (2) ID = <10306> Status = 0 0 0 0 ok 2008-Apr-25 21:21:54 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES3193_p2_011' 2008-Apr-25 21:21:54 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-25 21:21:54 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1A_p2_059} 2008-Apr-25 21:21:54 INFO3 fixed_driftmap: Sending telescope to Az = 312.64 and ZA = 15.59 2008-Apr-25 21:21:54 LOG3 track_source: Calling 'track_source AGESVC1A_p2_059 312.64 15.5869144198 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-25 21:21:54 START begin_task: Starting task 'sending tracking commands' 2008-Apr-25 21:21:54 LOG5 begin_task: Level: (3) ID = <10307> Status = 0 0 0 0 ok 2008-Apr-25 21:21:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_059} INFO {Slewing to source 'AGESVC1A_p2_059' ...} 2008-Apr-25 21:21:54 INFO1 track_source: Starting to track AGESVC1A_p2_059 2008-Apr-25 21:21:54 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_059" 2008-Apr-25 21:21:54 LOG3 vw_send: To DATATAKING: set ra 312.64 2008-Apr-25 21:21:54 LOG3 vw_send: To DATATAKING: set dec 15.5869144198 2008-Apr-25 21:21:54 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-25 21:21:54 LOG3 vw_send: To DATATAKING: pnt tr 312.64 15.5869144198 -CF 2008-Apr-25 21:21:54 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-25 21:21:54 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-25 21:21:54 LOG5 finish_task: Level: (3) ID = <10307> Status = 0 0 0 0 ok 2008-Apr-25 21:21:54 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-25 21:21:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 21:21:54 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-25 21:21:54 LOG5 end_task: Level: (3) ID = <10307> Status = 0 0 0 0 ok 2008-Apr-25 21:21:54 START begin_task: Starting task 'rotate ALFA to +59.5 degrees' 2008-Apr-25 21:21:54 LOG5 begin_task: Level: (3) ID = <10308> Status = 0 0 0 0 ok 2008-Apr-25 21:21:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +59.5 degrees ...} 2008-Apr-25 21:21:54 INFO2 rotate_alfa: ALFA commanded to +59.5 degrees 2008-Apr-25 21:21:54 LOG3 sock_errsend: To ALFAMOTOR: POSITION 59.5 REPLY 2008-Apr-25 21:21:54 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-25 21:21:54 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-25 21:21:54 LOG5 begin_task: Level: (4) ID = <10309> Status = 0 0 0 0 ok 2008-Apr-25 21:21:54 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_059" 2008-Apr-25 21:21:54 INFO5 check_wapp_levels: WAPP power levels are between 0.885 and 6.611 (still bad) 2008-Apr-25 21:21:54 LOG4 got_cormsg: From DATATAKING: set ra 312.64 2008-Apr-25 21:21:54 LOG4 got_cormsg: From DATATAKING: set dec 15.5869144198 2008-Apr-25 21:21:54 LOG4 got_cormsg: From DATATAKING: vw% 312.64 2008-Apr-25 21:21:54 LOG4 got_cormsg: From DATATAKING: vw% 15.5869144198 2008-Apr-25 21:21:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 21:21:54 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-25 21:21:54 LOG4 got_cormsg: From DATATAKING: pnt tr 312.64 15.5869144198 -CF 2008-Apr-25 21:21:54 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-25 21:21:54 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-25 21:21:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 21:22:12 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-25 21:22:12 INFO3 alfa_motor: ALFA rotator in-position +59.50 degrees 2008-Apr-25 21:22:12 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-25 21:22:12 LOG5 end_task: Level: (4) ID = <10309> Status = 0 0 0 0 ok 2008-Apr-25 21:22:12 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-25 21:22:12 STOP finish_task: Finishing task 'rotate ALFA to +59.5 degrees' 2008-Apr-25 21:22:12 LOG5 finish_task: Level: (3) ID = <10308> Status = 0 0 0 0 ok 2008-Apr-25 21:22:12 INFO2 finish_task: DONE finished configuration: rotating ALFA to +59.5 degrees 2008-Apr-25 21:22:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 21:22:12 STOP end_task: Finishing task 'rotate ALFA to +59.5 degrees' with status 'OK' 2008-Apr-25 21:22:12 LOG5 end_task: Level: (3) ID = <10308> Status = 0 0 0 0 ok 2008-Apr-25 21:22:12 START begin_task: Starting task 'waiting on telescope' 2008-Apr-25 21:22:12 LOG5 begin_task: Level: (3) ID = <10310> Status = 0 0 0 0 ok 2008-Apr-25 21:22:12 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-25 21:22:12 LOG3 waittrk: Start waittrk 5 2008-Apr-25 21:22:12 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-25 21:22:12 LOG5 begin_task: Level: (4) ID = <10311> Status = 0 0 0 0 ok 2008-Apr-25 21:22:17 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-25 21:22:17 LOG5 end_task: Level: (4) ID = <10311> Status = 0 0 0 0 ok 2008-Apr-25 21:22:17 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-25 21:22:17 LOG5 begin_task: Level: (4) ID = <10312> Status = 0 0 0 0 ok 2008-Apr-25 21:30:08 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-25 21:30:08 LOG5 end_task: Level: (4) ID = <10312> Status = 0 0 0 0 ok 2008-Apr-25 21:30:08 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-25 21:30:08 INFO2 waittrk: Now tracking AGESVC1A_p2_059 2008-Apr-25 21:30:09 LOG4 waittrk: Current telescope position: Az = 312.26 ZA = 15.58 2008-Apr-25 21:30:09 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-25 21:30:09 LOG5 finish_task: Level: (3) ID = <10310> Status = 0 0 0 0 ok 2008-Apr-25 21:30:09 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-25 21:30:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 21:30:09 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-25 21:30:09 LOG5 end_task: Level: (3) ID = <10310> Status = 0 0 0 0 ok 2008-Apr-25 21:30:09 START begin_task: Starting task 'selecting calibration type' 2008-Apr-25 21:30:09 LOG5 begin_task: Level: (3) ID = <10313> Status = 0 0 0 0 ok 2008-Apr-25 21:30:09 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-25 21:30:09 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-25 21:30:09 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 21:30:09 START begin_task: Starting task 'waiting on setcal' 2008-Apr-25 21:30:09 LOG5 begin_task: Level: (4) ID = <10314> Status = 0 0 0 0 ok 2008-Apr-25 21:30:09 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-25 21:30:09 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 21:30:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 21:30:09 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-25 21:30:09 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-25 21:30:09 LOG5 end_task: Level: (4) ID = <10314> Status = 0 0 0 0 ok 2008-Apr-25 21:30:09 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-25 21:30:09 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 21:30:09 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-25 21:30:09 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 21:30:09 LOG5 begin_task: Level: (4) ID = <10315> Status = 0 0 0 0 ok 2008-Apr-25 21:30:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 21:30:10 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 21:30:10 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 21:30:10 LOG5 end_task: Level: (4) ID = <10315> Status = 0 0 0 0 ok 2008-Apr-25 21:30:10 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 21:30:10 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-25 21:30:10 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 21:30:10 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-25 21:30:10 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 21:30:10 LOG5 begin_task: Level: (4) ID = <10316> Status = 0 0 0 0 ok 2008-Apr-25 21:30:10 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 21:30:10 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 21:30:10 LOG5 end_task: Level: (4) ID = <10316> Status = 0 0 0 0 ok 2008-Apr-25 21:30:10 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 21:30:10 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-25 21:30:10 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-25 21:30:10 LOG5 finish_task: Level: (3) ID = <10313> Status = 0 0 0 0 ok 2008-Apr-25 21:30:10 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-25 21:30:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 21:30:10 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-25 21:30:10 LOG5 end_task: Level: (3) ID = <10313> Status = 0 0 0 0 ok 2008-Apr-25 21:30:10 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2008-Apr-25 21:30:10 INFO2 astwait: Waiting for 96 seconds from 01:30:10 to 01:31:46 UTC ... 2008-Apr-25 21:30:10 LOG4 send_obs_status: To obs_status: <1> TASKTIME 96 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-25 21:30:10 START begin_task: Starting task 'waiting on waiting for AST time' 2008-Apr-25 21:30:10 LOG5 begin_task: Level: (3) ID = <10317> Status = 0 0 0 0 ok 2008-Apr-25 21:31:46 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2008-Apr-25 21:31:46 LOG5 end_task: Level: (3) ID = <10317> Status = 0 0 0 0 ok 2008-Apr-25 21:31:46 INFO3 astwait: Finished waiting 2008-Apr-25 21:31:46 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-25 21:31:46 LOG5 dopset_later: Calling 'dopset_later 60.538007073900872' 2008-Apr-25 21:31:46 INFO3 dopset_later: Setting Doppler correction for 21:32:46 (60.5 seconds from now) 2008-Apr-25 21:31:46 LOG5 antvel: Calling 'antvel 312.640000 15.586914 F 60.538007073900872' 2008-Apr-25 21:31:46 LOG2 antvel: Parameters to Doppler: Heliocentric 91966 2008 116 0.0 2008-Apr-25 21:31:46 INFO5 antvel: Computed antenna velocity: +17.19741 km/s 2008-Apr-25 21:31:46 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=17.197407041799998 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-25 21:31:46 INFO4 dopset_gen: New sky frequencies: 1381.164199 1381.164199 1381.164199 1381.164199 1381.164199 1381.164199 1381.164199 1381.164199 1381.164199 2008-Apr-25 21:31:46 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.164199 sky0=1381.164199 sky1=1381.164199 sky2=1381.164199 sky3=1381.164199 sky4=1381.164199 sky5=1381.164199 sky6=1381.164199 sky7=1381.164199 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-25 21:31:46 LOG2 dopset_gen: Result from 'sky2syn': 1631.164199 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-25 21:31:46 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631164199.0} 2008-Apr-25 21:31:46 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 21:31:46 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-25 21:31:46 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-25 21:31:46 INFO5 fixed_driftmap: Tracking J2000 position: RA = 12:08:03.9 Dec = +07:32:51.2 2008-Apr-25 21:31:46 LOG3 track_source: Calling 'track_source AGESVC1A_p2_059 120803.9 073251.2 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-25 21:31:46 START begin_task: Starting task 'sending tracking commands' 2008-Apr-25 21:31:46 LOG5 begin_task: Level: (3) ID = <10318> Status = 0 0 0 0 ok 2008-Apr-25 21:31:46 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_059} INFO {Slewing to source 'AGESVC1A_p2_059' ...} 2008-Apr-25 21:31:46 INFO1 track_source: Starting to track AGESVC1A_p2_059 2008-Apr-25 21:31:46 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_059" 2008-Apr-25 21:31:46 LOG3 vw_send: To DATATAKING: set ra 120803.9 2008-Apr-25 21:31:46 LOG3 vw_send: To DATATAKING: set dec 073251.2 2008-Apr-25 21:31:46 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-25 21:31:46 LOG3 vw_send: To DATATAKING: pnt tr 120803.9 073251.2 -CJ 2008-Apr-25 21:31:46 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-25 21:31:46 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-25 21:31:46 LOG5 finish_task: Level: (3) ID = <10318> Status = 0 0 0 0 ok 2008-Apr-25 21:31:46 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-25 21:31:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 21:31:46 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-25 21:31:46 LOG5 end_task: Level: (3) ID = <10318> Status = 0 0 0 0 ok 2008-Apr-25 21:31:46 START begin_task: Starting task 'waiting on telescope' 2008-Apr-25 21:31:46 LOG5 begin_task: Level: (3) ID = <10319> Status = 0 0 0 0 ok 2008-Apr-25 21:31:46 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-25 21:31:46 LOG3 waittrk: Start waittrk 5 2008-Apr-25 21:31:46 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-25 21:31:46 LOG5 begin_task: Level: (4) ID = <10320> Status = 0 0 0 0 ok 2008-Apr-25 21:31:46 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631164199.0} 2008-Apr-25 21:31:46 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 21:31:46 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_059" 2008-Apr-25 21:31:46 LOG4 got_cormsg: From DATATAKING: set ra 120803.9 2008-Apr-25 21:31:46 LOG4 got_cormsg: From DATATAKING: set dec 073251.2 2008-Apr-25 21:31:46 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 120803.9 2008-Apr-25 21:31:46 LOG4 got_cormsg: From DATATAKING: vw% 073251.2 2008-Apr-25 21:31:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 21:31:46 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-25 21:31:46 LOG4 got_cormsg: From DATATAKING: pnt tr 120803.9 073251.2 -CJ 2008-Apr-25 21:31:46 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-25 21:31:46 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-25 21:31:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 21:31:51 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-25 21:31:51 LOG5 end_task: Level: (4) ID = <10320> Status = 0 0 0 0 ok 2008-Apr-25 21:31:51 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-25 21:31:51 LOG5 begin_task: Level: (4) ID = <10321> Status = 0 0 0 0 ok 2008-Apr-25 21:31:53 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-25 21:31:53 LOG5 end_task: Level: (4) ID = <10321> Status = 0 0 0 0 ok 2008-Apr-25 21:31:53 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-25 21:31:53 INFO2 waittrk: Now tracking AGESVC1A_p2_059 2008-Apr-25 21:31:53 LOG4 waittrk: Current telescope position: Az = 312.31 ZA = 15.57 2008-Apr-25 21:31:53 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-25 21:31:53 LOG5 finish_task: Level: (3) ID = <10319> Status = 0 0 0 0 ok 2008-Apr-25 21:31:53 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-25 21:31:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 21:31:53 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-25 21:31:53 LOG5 end_task: Level: (3) ID = <10319> Status = 0 0 0 0 ok 2008-Apr-25 21:31:53 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-25 21:31:53 LOG5 begin_task: Level: (3) ID = <10322> Status = 0 0 0 0 ok 2008-Apr-25 21:31:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-25 21:31:53 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-25 21:31:53 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-25 21:31:53 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-25 21:31:53 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 21:31:53 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-25 21:31:53 LOG5 begin_task: Level: (4) ID = <10323> Status = 0 0 0 0 ok 2008-Apr-25 21:31:53 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-25 21:31:53 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 21:31:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 21:31:54 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-25 21:31:54 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-25 21:31:54 LOG5 end_task: Level: (4) ID = <10323> Status = 0 0 0 0 ok 2008-Apr-25 21:31:54 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-25 21:31:54 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-25 21:31:54 LOG5 begin_task: Level: (4) ID = <10324> Status = 0 0 0 0 ok 2008-Apr-25 21:31:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-25 21:31:54 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-25 21:31:54 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-25 21:31:54 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-25 21:31:54 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-25 21:31:54 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-25 21:31:54 LOG5 begin_task: Level: (5) ID = <10325> Status = 0 0 0 0 ok 2008-Apr-25 21:31:54 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-25 21:31:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 21:31:54 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 9 dB --- beam 1: 7 6 dB 2008-Apr-25 21:31:54 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-25 21:31:54 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 6 dB 2008-Apr-25 21:31:54 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 2 3 dB 2008-Apr-25 21:31:54 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-25 21:31:54 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-25 21:31:54 LOG5 end_task: Level: (5) ID = <10325> Status = 0 0 0 0 ok 2008-Apr-25 21:31:54 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.903 1.055 ALFA beam 1: 1.138 1.089 2008-Apr-25 21:31:54 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.094 0.986 ALFA beam 3: 1.038 1.068 2008-Apr-25 21:31:54 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.986 1.010 ALFA beam 5: 1.067 0.951 2008-Apr-25 21:31:54 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.021 1.044 ALFA beam 7: 1.118 0.925 2008-Apr-25 21:31:54 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-25 21:31:54 LOG5 finish_task: Level: (4) ID = <10324> Status = 0 0 0 0 ok 2008-Apr-25 21:31:54 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-25 21:31:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 21:31:54 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-25 21:31:54 LOG5 end_task: Level: (4) ID = <10324> Status = 0 0 0 0 ok 2008-Apr-25 21:31:54 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-25 21:31:54 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-25 21:31:54 LOG5 finish_task: Level: (3) ID = <10322> Status = 0 0 0 0 ok 2008-Apr-25 21:31:54 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-25 21:31:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 21:31:54 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-25 21:31:54 LOG5 end_task: Level: (3) ID = <10322> Status = 0 0 0 0 ok 2008-Apr-25 21:31:54 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 EM, RM 2008-Apr-25 21:31:54 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 EM, RM 2008-Apr-25 21:31:54 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 EM, RM 2008-Apr-25 21:31:54 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 EM, RM 2008-Apr-25 21:31:55 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-25 21:31:55 START begin_task: Starting task 'WAPP calibration' 2008-Apr-25 21:31:55 LOG5 begin_task: Level: (3) ID = <10326> Status = 0 0 0 0 ok 2008-Apr-25 21:31:55 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-25 21:31:55 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-25 21:31:55 START begin_task: Starting task 'selecting calibration type' 2008-Apr-25 21:31:55 LOG5 begin_task: Level: (4) ID = <10327> Status = 0 0 0 0 ok 2008-Apr-25 21:31:55 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-25 21:31:55 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-25 21:31:55 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 21:31:55 START begin_task: Starting task 'waiting on setcal' 2008-Apr-25 21:31:55 LOG5 begin_task: Level: (5) ID = <10328> Status = 0 0 0 0 ok 2008-Apr-25 21:31:55 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 EM, RM' 2008-Apr-25 21:31:55 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-25 21:31:55 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 21:31:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 21:31:55 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-25 21:31:55 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-25 21:31:55 LOG5 end_task: Level: (5) ID = <10328> Status = 0 0 0 0 ok 2008-Apr-25 21:31:55 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-25 21:31:55 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 21:31:55 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-25 21:31:55 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 21:31:55 LOG5 begin_task: Level: (5) ID = <10329> Status = 0 0 0 0 ok 2008-Apr-25 21:31:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 21:31:55 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 21:31:55 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 21:31:55 LOG5 end_task: Level: (5) ID = <10329> Status = 0 0 0 0 ok 2008-Apr-25 21:31:55 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 21:31:55 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-25 21:31:55 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 21:31:55 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-25 21:31:55 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 21:31:55 LOG5 begin_task: Level: (5) ID = <10330> Status = 0 0 0 0 ok 2008-Apr-25 21:31:55 NOTE WAPPDATA-new_file: New FITS file: wapp.20080425.a2048.0007.fits 2008-Apr-25 21:31:55 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 21:31:55 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 21:31:55 LOG5 end_task: Level: (5) ID = <10330> Status = 0 0 0 0 ok 2008-Apr-25 21:31:55 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 21:31:55 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-25 21:31:55 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-25 21:31:55 LOG5 finish_task: Level: (4) ID = <10327> Status = 0 0 0 0 ok 2008-Apr-25 21:31:55 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-25 21:31:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 21:31:55 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-25 21:31:55 LOG5 end_task: Level: (4) ID = <10327> Status = 0 0 0 0 ok 2008-Apr-25 21:31:55 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-25 21:31:55 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-25 21:31:55 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-25 21:31:55 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-25 21:31:55 LOG5 begin_task: Level: (4) ID = <10331> Status = 0 0 0 0 ok 2008-Apr-25 21:31:55 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080425.a2048.0007.fits} 2008-Apr-25 21:31:55 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-25 21:31:55 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-25 21:31:55 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-25 21:31:55 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-25 21:31:55 LOG5 end_task: Level: (4) ID = <10331> Status = 0 0 0 0 ok 2008-Apr-25 21:31:55 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-25 21:31:55 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-25 21:31:55 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-25 21:31:55 LOG5 begin_task: Level: (4) ID = <10332> Status = 0 0 0 0 ok 2008-Apr-25 21:31:55 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-25 21:31:55 LOG5 log_alfabeam: Parameters: 12.134416666666665 7.5475555555555545 11.376803 2008.3200469934341 59.499908 2008-Apr-25 21:31:55 LOG4 log_alfabeam: ALFABEAM 0 12.134416666666661 7.547555555555554 2008-Apr-25 21:31:55 LOG4 log_alfabeam: ALFABEAM 1 12.132161171539856 7.645067692486575 2008-Apr-25 21:31:55 LOG4 log_alfabeam: ALFABEAM 2 12.127860870685959 7.580484932410527 2008-Apr-25 21:31:55 LOG4 log_alfabeam: ALFABEAM 3 12.130079283021713 7.482785379398964 2008-Apr-25 21:31:55 LOG4 log_alfabeam: ALFABEAM 4 12.136640115601455 7.449762807285915 2008-Apr-25 21:31:55 LOG4 log_alfabeam: ALFABEAM 5 12.140990632747828 7.515075768693920 2008-Apr-25 21:31:55 LOG4 log_alfabeam: ALFABEAM 6 12.138730082766827 7.612680743058358 2008-Apr-25 21:31:55 INFO2 take_spectra: Starting WAPP scan: 811600120 2008-Apr-25 21:31:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-25 21:31:56 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-25 21:31:56 LOG5 begin_task: Level: (5) ID = <10333> Status = 0 0 0 0 ok 2008-Apr-25 21:31:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 21:31:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 5517.00 2008-Apr-25 21:32:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.164199 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 21:32:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.164199 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 21:32:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.164199 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 21:32:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.164199 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 21:32:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.164199 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 21:32:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.164199 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 21:32:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.164199 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 21:32:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.164199 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 21:32:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.164199 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 21:32:02 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 21:32:02 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-25 21:32:02 LOG5 end_task: Level: (5) ID = <10333> Status = 0 0 0 0 ok 2008-Apr-25 21:32:02 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-25 21:32:02 LOG5 end_task: Level: (4) ID = <10332> Status = 0 0 0 0 ok 2008-Apr-25 21:32:02 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-25 21:32:02 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-25 21:32:02 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-25 21:32:02 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-25 21:32:02 LOG5 begin_task: Level: (4) ID = <10334> Status = 0 0 0 0 ok 2008-Apr-25 21:32:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.568 > 1.4)! 2008-Apr-25 21:32:02 LOG4 check_wapp_levels: WAPP-1 power levels: 0.903 1.055 1.138 1.089 2008-Apr-25 21:32:02 LOG4 check_wapp_levels: WAPP-2 power levels: 1.473 1.344 1.416 1.457 2008-Apr-25 21:32:02 LOG4 check_wapp_levels: WAPP-3 power levels: 1.356 1.387 1.469 1.257 2008-Apr-25 21:32:02 LOG4 check_wapp_levels: WAPP-4 power levels: 1.433 1.448 1.568 1.285 2008-Apr-25 21:32:02 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-25 21:32:02 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-25 21:32:02 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-25 21:32:02 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-25 21:32:02 LOG5 end_task: Level: (4) ID = <10334> Status = 0 0 0 0 ok 2008-Apr-25 21:32:03 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-25 21:32:03 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-25 21:32:03 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-25 21:32:03 LOG5 begin_task: Level: (4) ID = <10335> Status = 0 0 0 0 ok 2008-Apr-25 21:32:03 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-25 21:32:03 LOG5 log_alfabeam: Parameters: 12.134416666666665 7.5475555555555545 11.378753 2008.3200472152507 59.499908 2008-Apr-25 21:32:03 LOG4 log_alfabeam: ALFABEAM 0 12.134416666666660 7.547555555555564 2008-Apr-25 21:32:03 LOG4 log_alfabeam: ALFABEAM 1 12.132169196860472 7.645108564807340 2008-Apr-25 21:32:03 LOG4 log_alfabeam: ALFABEAM 2 12.127863604374761 7.580604802180569 2008-Apr-25 21:32:03 LOG4 log_alfabeam: ALFABEAM 3 12.130073926806412 7.482864789653591 2008-Apr-25 21:32:03 LOG4 log_alfabeam: ALFABEAM 4 12.136632027789830 7.449722137263085 2008-Apr-25 21:32:03 LOG4 log_alfabeam: ALFABEAM 5 12.140987961182638 7.514956216618629 2008-Apr-25 21:32:03 LOG4 log_alfabeam: ALFABEAM 6 12.138735434324209 7.612602272693392 2008-Apr-25 21:32:03 INFO2 take_spectra: Starting WAPP scan: 811600121 2008-Apr-25 21:32:03 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-25 21:32:03 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-25 21:32:03 LOG5 begin_task: Level: (5) ID = <10336> Status = 0 0 0 0 ok 2008-Apr-25 21:32:03 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 21:32:03 INFO1 WAPP=1+2+3+4-start_spectra: start sec 5524.00 2008-Apr-25 21:32:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.164199 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 21:32:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.164199 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 21:32:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.164199 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 21:32:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.164199 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 21:32:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.164199 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 21:32:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.164199 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 21:32:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.164199 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 21:32:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.164199 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 21:32:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.164199 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 21:32:09 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-25 21:32:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 21:32:09 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-25 21:32:09 LOG5 end_task: Level: (5) ID = <10336> Status = 0 0 0 0 ok 2008-Apr-25 21:32:09 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-25 21:32:09 LOG5 end_task: Level: (4) ID = <10335> Status = 0 0 0 0 ok 2008-Apr-25 21:32:09 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-25 21:32:09 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-25 21:32:09 LOG5 finish_task: Level: (3) ID = <10326> Status = 0 0 0 0 ok 2008-Apr-25 21:32:09 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-25 21:32:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 21:32:09 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-25 21:32:09 LOG5 end_task: Level: (3) ID = <10326> Status = 0 0 0 0 ok 2008-Apr-25 21:32:09 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-25 21:32:10 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 312.64 and ZA = 15.59 2008-Apr-25 21:32:10 LOG3 track_source: Calling 'track_source AGESVC1A_p2_059 312.64 15.5869144198 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-25 21:32:10 START begin_task: Starting task 'sending tracking commands' 2008-Apr-25 21:32:10 LOG5 begin_task: Level: (3) ID = <10337> Status = 0 0 0 0 ok 2008-Apr-25 21:32:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_059} INFO {Slewing to source 'AGESVC1A_p2_059' ...} 2008-Apr-25 21:32:10 INFO1 track_source: Starting to track AGESVC1A_p2_059 2008-Apr-25 21:32:10 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_059" 2008-Apr-25 21:32:10 LOG3 vw_send: To DATATAKING: set ra 312.64 2008-Apr-25 21:32:10 LOG3 vw_send: To DATATAKING: set dec 15.5869144198 2008-Apr-25 21:32:10 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-25 21:32:10 LOG3 vw_send: To DATATAKING: pnt tr 312.64 15.5869144198 -CF 2008-Apr-25 21:32:10 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-25 21:32:10 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-25 21:32:10 LOG5 finish_task: Level: (3) ID = <10337> Status = 0 0 0 0 ok 2008-Apr-25 21:32:10 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-25 21:32:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 21:32:10 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-25 21:32:10 LOG5 end_task: Level: (3) ID = <10337> Status = 0 0 0 0 ok 2008-Apr-25 21:32:10 LOG1 fixed_driftmap: Parameters: HA = -00:46:00.0 Start = 11:23:27.2 LST = 11:22:50.5 diff = 36.6 secs 2008-Apr-25 21:32:10 INFO2 fixed_driftmap: Waiting 34.6 seconds for RA 12:09:27 2008-Apr-25 21:32:10 INFO2 lstwait: Waiting for 34.5 secs from LST 11:22:51 to LST 11:23:25 ... 2008-Apr-25 21:32:10 LOG4 send_obs_status: To obs_status: <1> TASKTIME 34.546767850860881 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-25 21:32:10 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-25 21:32:10 LOG5 begin_task: Level: (3) ID = <10338> Status = 0 0 0 0 ok 2008-Apr-25 21:32:10 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 1.568 (still bad) 2008-Apr-25 21:32:10 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_059" 2008-Apr-25 21:32:10 LOG4 got_cormsg: From DATATAKING: set ra 312.64 2008-Apr-25 21:32:10 LOG4 got_cormsg: From DATATAKING: set dec 15.5869144198 2008-Apr-25 21:32:10 LOG4 got_cormsg: From DATATAKING: vw% 312.64 2008-Apr-25 21:32:10 LOG4 got_cormsg: From DATATAKING: vw% 15.5869144198 2008-Apr-25 21:32:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 21:32:10 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-25 21:32:10 LOG4 got_cormsg: From DATATAKING: pnt tr 312.64 15.5869144198 -CF 2008-Apr-25 21:32:10 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-25 21:32:10 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-25 21:32:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 21:32:44 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-25 21:32:44 LOG5 end_task: Level: (3) ID = <10338> Status = 0 0 0 0 ok 2008-Apr-25 21:32:44 LOG4 lstwait: Finished waiting, the gui caused difference: 0.45504740000410493 2008-Apr-25 21:32:44 INFO3 lstwait: Finished waiting 2008-Apr-25 21:32:44 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-25 21:32:44 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-25 21:32:44 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-25 21:32:44 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-25 21:32:45 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-25 21:32:45 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-25 21:32:45 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-25 21:32:45 LOG5 begin_task: Level: (3) ID = <10339> Status = 0 0 0 0 ok 2008-Apr-25 21:32:45 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-25 21:32:45 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-25 21:32:45 INFO2 take_spectra: Starting WAPP scan: 811600122 2008-Apr-25 21:32:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-25 21:32:45 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-25 21:32:45 LOG5 begin_task: Level: (4) ID = <10340> Status = 0 0 0 0 ok 2008-Apr-25 21:32:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 21:32:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 5566.00 2008-Apr-25 21:32:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.164199 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 21:32:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.164199 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 21:32:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.164199 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 21:32:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.164199 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 21:32:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.164199 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 21:32:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.164199 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 21:32:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.164199 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 21:32:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.164199 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 21:32:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.164199 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 21:32:47 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.902 and 1.144 2008-Apr-25 21:36:50 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 21:36:50.296 (seconds: 77810.296)!} 2008-Apr-25 21:36:50 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 21:36:50.296 (seconds: 77810.296)! 2008-Apr-25 21:36:51 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 77809.0 to 77810.0! 2008-Apr-25 21:36:52 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (77809.0 - 77811.0)! 2008-Apr-25 21:51:49 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 21:51:49.296 (seconds: 78709.296)!} 2008-Apr-25 21:51:49 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 21:51:49.296 (seconds: 78709.296)! 2008-Apr-25 21:51:50 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 78708.0 to 78709.0! 2008-Apr-25 21:51:51 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (78708.0 - 78710.0)! 2008-Apr-25 21:52:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 21:52:46 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-25 21:52:46 LOG5 end_task: Level: (4) ID = <10340> Status = 0 0 0 0 ok 2008-Apr-25 21:52:46 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-25 21:52:46 LOG5 end_task: Level: (3) ID = <10339> Status = 0 0 0 0 ok 2008-Apr-25 21:52:46 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-25 21:52:46 LOG5 finish_task: Level: (2) ID = <10306> Status = 0 0 0 0 ok 2008-Apr-25 21:52:46 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-25 21:52:46 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-25 21:52:46 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-25 21:52:46 LOG5 end_task: Level: (2) ID = <10306> Status = 0 0 0 0 ok 2008-Apr-25 21:52:46 COMMAND run_command_line: EXECUTING command 35: 'FIXEDDRIFT az=332.09 alfaangle=42.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_061 ra=120900.00 dec=73000.00' 2008-Apr-25 21:52:46 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-25 21:52:47 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-25 21:52:47 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 332.09 42.3 hcorcal 5 tracking no first 1 AGESVC1A_p2_061 120900.00 73000.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-25 21:52:47 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-25 21:52:47 LOG5 begin_task: Level: (2) ID = <10341> Status = 0 0 0 0 ok 2008-Apr-25 21:52:47 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGESVC1A_p2_059' 2008-Apr-25 21:52:47 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-25 21:52:47 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1A_p2_061} 2008-Apr-25 21:52:47 INFO3 fixed_driftmap: Sending telescope to Az = 332.09 and ZA = 12.25 2008-Apr-25 21:52:47 LOG3 track_source: Calling 'track_source AGESVC1A_p2_061 332.09 12.2546125789 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-25 21:52:47 START begin_task: Starting task 'sending tracking commands' 2008-Apr-25 21:52:47 LOG5 begin_task: Level: (3) ID = <10342> Status = 0 0 0 0 ok 2008-Apr-25 21:52:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_061} INFO {Slewing to source 'AGESVC1A_p2_061' ...} 2008-Apr-25 21:52:47 INFO1 track_source: Starting to track AGESVC1A_p2_061 2008-Apr-25 21:52:47 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_061" 2008-Apr-25 21:52:47 LOG3 vw_send: To DATATAKING: set ra 332.09 2008-Apr-25 21:52:47 LOG3 vw_send: To DATATAKING: set dec 12.2546125789 2008-Apr-25 21:52:47 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-25 21:52:47 LOG3 vw_send: To DATATAKING: pnt tr 332.09 12.2546125789 -CF 2008-Apr-25 21:52:47 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-25 21:52:47 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-25 21:52:47 LOG5 finish_task: Level: (3) ID = <10342> Status = 0 0 0 0 ok 2008-Apr-25 21:52:47 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-25 21:52:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 21:52:47 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-25 21:52:47 LOG5 end_task: Level: (3) ID = <10342> Status = 0 0 0 0 ok 2008-Apr-25 21:52:47 START begin_task: Starting task 'rotate ALFA to +42.3 degrees' 2008-Apr-25 21:52:47 LOG5 begin_task: Level: (3) ID = <10343> Status = 0 0 0 0 ok 2008-Apr-25 21:52:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +42.3 degrees ...} 2008-Apr-25 21:52:47 INFO2 rotate_alfa: ALFA commanded to +42.3 degrees 2008-Apr-25 21:52:47 LOG3 sock_errsend: To ALFAMOTOR: POSITION 42.3 REPLY 2008-Apr-25 21:52:47 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-25 21:52:47 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-25 21:52:47 LOG5 begin_task: Level: (4) ID = <10344> Status = 0 0 0 0 ok 2008-Apr-25 21:52:47 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_061" 2008-Apr-25 21:52:47 LOG4 got_cormsg: From DATATAKING: set ra 332.09 2008-Apr-25 21:52:47 LOG4 got_cormsg: From DATATAKING: set dec 12.2546125789 2008-Apr-25 21:52:47 LOG4 got_cormsg: From DATATAKING: vw% 332.09 2008-Apr-25 21:52:47 LOG4 got_cormsg: From DATATAKING: vw% 12.2546125789 2008-Apr-25 21:52:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 21:52:47 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-25 21:52:47 LOG4 got_cormsg: From DATATAKING: pnt tr 332.09 12.2546125789 -CF 2008-Apr-25 21:52:47 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-25 21:52:47 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-25 21:52:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 21:52:58 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-25 21:52:58 INFO3 alfa_motor: ALFA rotator in-position +42.30 degrees 2008-Apr-25 21:52:58 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-25 21:52:58 LOG5 end_task: Level: (4) ID = <10344> Status = 0 0 0 0 ok 2008-Apr-25 21:52:58 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-25 21:52:58 STOP finish_task: Finishing task 'rotate ALFA to +42.3 degrees' 2008-Apr-25 21:52:58 LOG5 finish_task: Level: (3) ID = <10343> Status = 0 0 0 0 ok 2008-Apr-25 21:52:58 INFO2 finish_task: DONE finished configuration: rotating ALFA to +42.3 degrees 2008-Apr-25 21:52:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 21:52:58 STOP end_task: Finishing task 'rotate ALFA to +42.3 degrees' with status 'OK' 2008-Apr-25 21:52:58 LOG5 end_task: Level: (3) ID = <10343> Status = 0 0 0 0 ok 2008-Apr-25 21:52:58 START begin_task: Starting task 'waiting on telescope' 2008-Apr-25 21:52:58 LOG5 begin_task: Level: (3) ID = <10345> Status = 0 0 0 0 ok 2008-Apr-25 21:52:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-25 21:52:58 LOG3 waittrk: Start waittrk 5 2008-Apr-25 21:52:58 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-25 21:52:58 LOG5 begin_task: Level: (4) ID = <10346> Status = 0 0 0 0 ok 2008-Apr-25 21:53:03 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-25 21:53:03 LOG5 end_task: Level: (4) ID = <10346> Status = 0 0 0 0 ok 2008-Apr-25 21:53:03 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-25 21:53:03 LOG5 begin_task: Level: (4) ID = <10347> Status = 0 0 0 0 ok 2008-Apr-25 21:54:18 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-25 21:54:18 LOG5 end_task: Level: (4) ID = <10347> Status = 0 0 0 0 ok 2008-Apr-25 21:54:18 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-25 21:54:18 INFO2 waittrk: Now tracking AGESVC1A_p2_061 2008-Apr-25 21:54:18 LOG4 waittrk: Current telescope position: Az = 331.70 ZA = 12.23 2008-Apr-25 21:54:18 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-25 21:54:18 LOG5 finish_task: Level: (3) ID = <10345> Status = 0 0 0 0 ok 2008-Apr-25 21:54:18 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-25 21:54:18 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 21:54:18 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-25 21:54:18 LOG5 end_task: Level: (3) ID = <10345> Status = 0 0 0 0 ok 2008-Apr-25 21:54:18 START begin_task: Starting task 'selecting calibration type' 2008-Apr-25 21:54:18 LOG5 begin_task: Level: (3) ID = <10348> Status = 0 0 0 0 ok 2008-Apr-25 21:54:18 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-25 21:54:18 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-25 21:54:18 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 21:54:18 START begin_task: Starting task 'waiting on setcal' 2008-Apr-25 21:54:18 LOG5 begin_task: Level: (4) ID = <10349> Status = 0 0 0 0 ok 2008-Apr-25 21:54:18 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-25 21:54:18 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 21:54:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 21:54:19 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-25 21:54:19 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-25 21:54:19 LOG5 end_task: Level: (4) ID = <10349> Status = 0 0 0 0 ok 2008-Apr-25 21:54:19 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-25 21:54:19 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 21:54:19 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-25 21:54:19 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 21:54:19 LOG5 begin_task: Level: (4) ID = <10350> Status = 0 0 0 0 ok 2008-Apr-25 21:54:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 21:54:20 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 21:54:20 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 21:54:20 LOG5 end_task: Level: (4) ID = <10350> Status = 0 0 0 0 ok 2008-Apr-25 21:54:20 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 21:54:20 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-25 21:54:20 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 21:54:20 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-25 21:54:20 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 21:54:20 LOG5 begin_task: Level: (4) ID = <10351> Status = 0 0 0 0 ok 2008-Apr-25 21:54:20 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 21:54:20 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 21:54:20 LOG5 end_task: Level: (4) ID = <10351> Status = 0 0 0 0 ok 2008-Apr-25 21:54:20 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 21:54:20 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-25 21:54:20 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-25 21:54:20 LOG5 finish_task: Level: (3) ID = <10348> Status = 0 0 0 0 ok 2008-Apr-25 21:54:20 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-25 21:54:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 21:54:20 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-25 21:54:20 LOG5 end_task: Level: (3) ID = <10348> Status = 0 0 0 0 ok 2008-Apr-25 21:54:20 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2008-Apr-25 21:54:20 INFO2 astwait: Waiting for 22 seconds from 01:54:20 to 01:54:42 UTC ... 2008-Apr-25 21:54:20 LOG4 send_obs_status: To obs_status: <1> TASKTIME 22 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-25 21:54:20 START begin_task: Starting task 'waiting on waiting for AST time' 2008-Apr-25 21:54:20 LOG5 begin_task: Level: (3) ID = <10352> Status = 0 0 0 0 ok 2008-Apr-25 21:54:42 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2008-Apr-25 21:54:42 LOG5 end_task: Level: (3) ID = <10352> Status = 0 0 0 0 ok 2008-Apr-25 21:54:42 INFO3 astwait: Finished waiting 2008-Apr-25 21:54:42 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-25 21:54:42 LOG5 dopset_later: Calling 'dopset_later 60.614418109993451' 2008-Apr-25 21:54:42 INFO3 dopset_later: Setting Doppler correction for 21:55:42 (60.6 seconds from now) 2008-Apr-25 21:54:42 LOG5 antvel: Calling 'antvel 332.090000 12.254613 F 60.614418109993451' 2008-Apr-25 21:54:42 LOG2 antvel: Parameters to Doppler: Heliocentric 93342 2008 116 0.0 2008-Apr-25 21:54:42 INFO5 antvel: Computed antenna velocity: +17.24072 km/s 2008-Apr-25 21:54:42 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=17.2407248833 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-25 21:54:42 INFO4 dopset_gen: New sky frequencies: 1381.163999 1381.163999 1381.163999 1381.163999 1381.163999 1381.163999 1381.163999 1381.163999 1381.163999 2008-Apr-25 21:54:42 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.163999 sky0=1381.163999 sky1=1381.163999 sky2=1381.163999 sky3=1381.163999 sky4=1381.163999 sky5=1381.163999 sky6=1381.163999 sky7=1381.163999 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-25 21:54:42 LOG2 dopset_gen: Result from 'sky2syn': 1631.163999 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-25 21:54:42 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631163999.0} 2008-Apr-25 21:54:42 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 21:54:42 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-25 21:54:42 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-25 21:54:42 INFO5 fixed_driftmap: Tracking J2000 position: RA = 12:08:03.9 Dec = +07:29:51.2 2008-Apr-25 21:54:42 LOG3 track_source: Calling 'track_source AGESVC1A_p2_061 120803.9 072951.2 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-25 21:54:42 START begin_task: Starting task 'sending tracking commands' 2008-Apr-25 21:54:42 LOG5 begin_task: Level: (3) ID = <10353> Status = 0 0 0 0 ok 2008-Apr-25 21:54:42 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_061} INFO {Slewing to source 'AGESVC1A_p2_061' ...} 2008-Apr-25 21:54:42 INFO1 track_source: Starting to track AGESVC1A_p2_061 2008-Apr-25 21:54:42 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_061" 2008-Apr-25 21:54:42 LOG3 vw_send: To DATATAKING: set ra 120803.9 2008-Apr-25 21:54:42 LOG3 vw_send: To DATATAKING: set dec 072951.2 2008-Apr-25 21:54:42 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-25 21:54:42 LOG3 vw_send: To DATATAKING: pnt tr 120803.9 072951.2 -CJ 2008-Apr-25 21:54:42 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-25 21:54:42 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-25 21:54:42 LOG5 finish_task: Level: (3) ID = <10353> Status = 0 0 0 0 ok 2008-Apr-25 21:54:42 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-25 21:54:42 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 21:54:42 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-25 21:54:42 LOG5 end_task: Level: (3) ID = <10353> Status = 0 0 0 0 ok 2008-Apr-25 21:54:42 START begin_task: Starting task 'waiting on telescope' 2008-Apr-25 21:54:42 LOG5 begin_task: Level: (3) ID = <10354> Status = 0 0 0 0 ok 2008-Apr-25 21:54:42 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-25 21:54:42 LOG3 waittrk: Start waittrk 5 2008-Apr-25 21:54:42 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-25 21:54:42 LOG5 begin_task: Level: (4) ID = <10355> Status = 0 0 0 0 ok 2008-Apr-25 21:54:42 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631163999.0} 2008-Apr-25 21:54:42 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 21:54:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 21:54:42 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_061" 2008-Apr-25 21:54:42 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-25 21:54:42 LOG4 got_cormsg: From DATATAKING: set ra 120803.9 2008-Apr-25 21:54:42 LOG4 got_cormsg: From DATATAKING: set dec 072951.2 2008-Apr-25 21:54:42 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-25 21:54:42 LOG4 got_cormsg: From DATATAKING: pnt tr 120803.9 072951.2 -CJ 2008-Apr-25 21:54:42 LOG4 got_cormsg: From DATATAKING: 120803.9 2008-Apr-25 21:54:42 LOG4 got_cormsg: From DATATAKING: vw% 072951.2 2008-Apr-25 21:54:42 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2008-Apr-25 21:54:42 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-25 21:54:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 21:54:47 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-25 21:54:47 LOG5 end_task: Level: (4) ID = <10355> Status = 0 0 0 0 ok 2008-Apr-25 21:54:47 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-25 21:54:47 LOG5 begin_task: Level: (4) ID = <10356> Status = 0 0 0 0 ok 2008-Apr-25 21:54:49 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-25 21:54:49 LOG5 end_task: Level: (4) ID = <10356> Status = 0 0 0 0 ok 2008-Apr-25 21:54:49 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-25 21:54:49 INFO2 waittrk: Now tracking AGESVC1A_p2_061 2008-Apr-25 21:54:49 LOG4 waittrk: Current telescope position: Az = 331.78 ZA = 12.23 2008-Apr-25 21:54:49 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-25 21:54:49 LOG5 finish_task: Level: (3) ID = <10354> Status = 0 0 0 0 ok 2008-Apr-25 21:54:49 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-25 21:54:49 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 21:54:49 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-25 21:54:49 LOG5 end_task: Level: (3) ID = <10354> Status = 0 0 0 0 ok 2008-Apr-25 21:54:49 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-25 21:54:49 LOG5 begin_task: Level: (3) ID = <10357> Status = 0 0 0 0 ok 2008-Apr-25 21:54:49 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-25 21:54:49 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-25 21:54:49 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-25 21:54:49 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-25 21:54:49 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 21:54:49 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-25 21:54:49 LOG5 begin_task: Level: (4) ID = <10358> Status = 0 0 0 0 ok 2008-Apr-25 21:54:49 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-25 21:54:49 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 21:54:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 21:54:50 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-25 21:54:50 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-25 21:54:50 LOG5 end_task: Level: (4) ID = <10358> Status = 0 0 0 0 ok 2008-Apr-25 21:54:50 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-25 21:54:50 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-25 21:54:50 LOG5 begin_task: Level: (4) ID = <10359> Status = 0 0 0 0 ok 2008-Apr-25 21:54:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-25 21:54:50 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-25 21:54:50 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-25 21:54:50 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-25 21:54:50 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-25 21:54:50 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-25 21:54:50 LOG5 begin_task: Level: (5) ID = <10360> Status = 0 0 0 0 ok 2008-Apr-25 21:54:50 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-25 21:54:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 21:54:50 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 9 dB --- beam 1: 8 6 dB 2008-Apr-25 21:54:50 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-25 21:54:50 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 2 3 dB 2008-Apr-25 21:54:50 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 6 dB 2008-Apr-25 21:54:50 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-25 21:54:50 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-25 21:54:50 LOG5 end_task: Level: (5) ID = <10360> Status = 0 0 0 0 ok 2008-Apr-25 21:54:50 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.093 1.049 ALFA beam 1: 0.877 1.078 2008-Apr-25 21:54:50 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.044 0.947 ALFA beam 3: 0.982 1.030 2008-Apr-25 21:54:50 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.914 0.949 ALFA beam 5: 1.012 0.902 2008-Apr-25 21:54:50 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.991 1.015 ALFA beam 7: 1.085 0.898 2008-Apr-25 21:54:50 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-25 21:54:50 LOG5 finish_task: Level: (4) ID = <10359> Status = 0 0 0 0 ok 2008-Apr-25 21:54:50 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-25 21:54:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 21:54:50 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-25 21:54:50 LOG5 end_task: Level: (4) ID = <10359> Status = 0 0 0 0 ok 2008-Apr-25 21:54:50 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-25 21:54:50 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-25 21:54:50 LOG5 finish_task: Level: (3) ID = <10357> Status = 0 0 0 0 ok 2008-Apr-25 21:54:50 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-25 21:54:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 21:54:50 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-25 21:54:50 LOG5 end_task: Level: (3) ID = <10357> Status = 0 0 0 0 ok 2008-Apr-25 21:54:50 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 EM, RM 2008-Apr-25 21:54:50 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 EM, RM 2008-Apr-25 21:54:50 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 EM, RM 2008-Apr-25 21:54:51 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 EM, RM 2008-Apr-25 21:54:51 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-25 21:54:51 START begin_task: Starting task 'WAPP calibration' 2008-Apr-25 21:54:51 LOG5 begin_task: Level: (3) ID = <10361> Status = 0 0 0 0 ok 2008-Apr-25 21:54:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-25 21:54:51 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-25 21:54:51 START begin_task: Starting task 'selecting calibration type' 2008-Apr-25 21:54:51 LOG5 begin_task: Level: (4) ID = <10362> Status = 0 0 0 0 ok 2008-Apr-25 21:54:51 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-25 21:54:51 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-25 21:54:51 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 21:54:51 START begin_task: Starting task 'waiting on setcal' 2008-Apr-25 21:54:51 LOG5 begin_task: Level: (5) ID = <10363> Status = 0 0 0 0 ok 2008-Apr-25 21:54:51 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 EM, RM' 2008-Apr-25 21:54:51 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-25 21:54:51 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 21:54:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 21:54:51 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-25 21:54:51 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-25 21:54:51 LOG5 end_task: Level: (5) ID = <10363> Status = 0 0 0 0 ok 2008-Apr-25 21:54:51 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-25 21:54:51 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 21:54:51 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-25 21:54:51 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 21:54:51 LOG5 begin_task: Level: (5) ID = <10364> Status = 0 0 0 0 ok 2008-Apr-25 21:54:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 21:54:51 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 21:54:51 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 21:54:51 LOG5 end_task: Level: (5) ID = <10364> Status = 0 0 0 0 ok 2008-Apr-25 21:54:51 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 21:54:51 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-25 21:54:51 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 21:54:51 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-25 21:54:51 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 21:54:51 LOG5 begin_task: Level: (5) ID = <10365> Status = 0 0 0 0 ok 2008-Apr-25 21:54:51 NOTE WAPPDATA-new_file: New FITS file: wapp.20080425.a2048.0008.fits 2008-Apr-25 21:54:51 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 21:54:51 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 21:54:51 LOG5 end_task: Level: (5) ID = <10365> Status = 0 0 0 0 ok 2008-Apr-25 21:54:51 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 21:54:51 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-25 21:54:51 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-25 21:54:51 LOG5 finish_task: Level: (4) ID = <10362> Status = 0 0 0 0 ok 2008-Apr-25 21:54:51 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-25 21:54:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 21:54:51 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-25 21:54:51 LOG5 end_task: Level: (4) ID = <10362> Status = 0 0 0 0 ok 2008-Apr-25 21:54:51 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-25 21:54:51 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-25 21:54:51 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-25 21:54:51 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-25 21:54:51 LOG5 begin_task: Level: (4) ID = <10366> Status = 0 0 0 0 ok 2008-Apr-25 21:54:51 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080425.a2048.0008.fits} 2008-Apr-25 21:54:51 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-25 21:54:51 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-25 21:54:51 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-25 21:54:51 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-25 21:54:51 LOG5 end_task: Level: (4) ID = <10366> Status = 0 0 0 0 ok 2008-Apr-25 21:54:51 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-25 21:54:51 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-25 21:54:51 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-25 21:54:51 LOG5 begin_task: Level: (4) ID = <10367> Status = 0 0 0 0 ok 2008-Apr-25 21:54:51 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-25 21:54:51 LOG5 log_alfabeam: Parameters: 12.134416666666665 7.4975555555555546 11.760072 2008.3200905962431 42.299919 2008-Apr-25 21:54:51 LOG4 log_alfabeam: ALFABEAM 0 12.134416666666658 7.497555555555561 2008-Apr-25 21:54:51 LOG4 log_alfabeam: ALFABEAM 1 12.132450534265619 7.599452244440966 2008-Apr-25 21:54:51 LOG4 log_alfabeam: ALFABEAM 2 12.128211899701489 7.531960745085228 2008-Apr-25 21:54:51 LOG4 log_alfabeam: ALFABEAM 3 12.130127615465504 7.429843507672118 2008-Apr-25 21:54:51 LOG4 log_alfabeam: ALFABEAM 4 12.136361321293480 7.395538529558515 2008-Apr-25 21:54:51 LOG4 log_alfabeam: ALFABEAM 5 12.140656414074087 7.463808153861526 2008-Apr-25 21:54:51 LOG4 log_alfabeam: ALFABEAM 6 12.138661406830487 7.565601477932869 2008-Apr-25 21:54:51 INFO2 take_spectra: Starting WAPP scan: 811600123 2008-Apr-25 21:54:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-25 21:54:52 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-25 21:54:52 LOG5 begin_task: Level: (5) ID = <10368> Status = 0 0 0 0 ok 2008-Apr-25 21:54:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 21:54:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6893.00 2008-Apr-25 21:54:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.163999 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 21:54:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.163999 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 21:54:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.163999 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 21:54:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.163999 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 21:54:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.163999 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 21:54:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.163999 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 21:54:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.163999 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 21:54:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.163999 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 21:54:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.163999 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 21:54:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 21:54:58 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-25 21:54:58 LOG5 end_task: Level: (5) ID = <10368> Status = 0 0 0 0 ok 2008-Apr-25 21:54:58 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-25 21:54:58 LOG5 end_task: Level: (4) ID = <10367> Status = 0 0 0 0 ok 2008-Apr-25 21:54:58 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-25 21:54:58 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-25 21:54:58 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-25 21:54:58 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-25 21:54:58 LOG5 begin_task: Level: (4) ID = <10369> Status = 0 0 0 0 ok 2008-Apr-25 21:54:59 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-25 21:54:59 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-25 21:54:59 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-25 21:54:59 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-25 21:54:59 LOG5 end_task: Level: (4) ID = <10369> Status = 0 0 0 0 ok 2008-Apr-25 21:54:59 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-25 21:54:59 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-25 21:54:59 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-25 21:54:59 LOG5 begin_task: Level: (4) ID = <10370> Status = 0 0 0 0 ok 2008-Apr-25 21:54:59 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-25 21:54:59 LOG5 log_alfabeam: Parameters: 12.134416666666665 7.4975555555555546 11.762021 2008.3200908180595 42.299919 2008-Apr-25 21:54:59 LOG4 log_alfabeam: ALFABEAM 0 12.134416666666660 7.497555555555548 2008-Apr-25 21:54:59 LOG4 log_alfabeam: ALFABEAM 1 12.132464389748424 7.599511117598102 2008-Apr-25 21:54:59 LOG4 log_alfabeam: ALFABEAM 2 12.128216610798772 7.532147695523848 2008-Apr-25 21:54:59 LOG4 log_alfabeam: ALFABEAM 3 12.130118390375600 7.429972860921378 2008-Apr-25 21:54:59 LOG4 log_alfabeam: ALFABEAM 4 12.136347433324557 7.395480174457605 2008-Apr-25 21:54:59 LOG4 log_alfabeam: ALFABEAM 5 12.140651829667499 7.463620886043759 2008-Apr-25 21:54:59 LOG4 log_alfabeam: ALFABEAM 6 12.138670629406418 7.565473831944109 2008-Apr-25 21:54:59 INFO2 take_spectra: Starting WAPP scan: 811600124 2008-Apr-25 21:54:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-25 21:54:59 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-25 21:54:59 LOG5 begin_task: Level: (5) ID = <10371> Status = 0 0 0 0 ok 2008-Apr-25 21:54:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 21:54:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6900.00 2008-Apr-25 21:55:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.546 > 1.4)! 2008-Apr-25 21:55:04 LOG4 check_wapp_levels: WAPP-1 power levels: 1.546 1.427 1.186 1.452 2008-Apr-25 21:55:04 LOG4 check_wapp_levels: WAPP-2 power levels: 1.415 1.299 1.360 1.416 2008-Apr-25 21:55:04 LOG4 check_wapp_levels: WAPP-3 power levels: 1.279 1.324 1.413 1.204 2008-Apr-25 21:55:04 LOG4 check_wapp_levels: WAPP-4 power levels: 1.400 1.421 1.530 1.257 2008-Apr-25 21:55:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.163999 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 21:55:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.163999 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 21:55:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.163999 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 21:55:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.163999 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 21:55:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.163999 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 21:55:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.163999 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 21:55:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.163999 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 21:55:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.163999 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 21:55:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.163999 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 21:55:05 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-25 21:55:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 21:55:05 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-25 21:55:05 LOG5 end_task: Level: (5) ID = <10371> Status = 0 0 0 0 ok 2008-Apr-25 21:55:05 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-25 21:55:05 LOG5 end_task: Level: (4) ID = <10370> Status = 0 0 0 0 ok 2008-Apr-25 21:55:05 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-25 21:55:05 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-25 21:55:05 LOG5 finish_task: Level: (3) ID = <10361> Status = 0 0 0 0 ok 2008-Apr-25 21:55:05 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-25 21:55:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 21:55:05 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-25 21:55:05 LOG5 end_task: Level: (3) ID = <10361> Status = 0 0 0 0 ok 2008-Apr-25 21:55:06 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-25 21:55:06 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 332.09 and ZA = 12.25 2008-Apr-25 21:55:06 LOG3 track_source: Calling 'track_source AGESVC1A_p2_061 332.09 12.2546125789 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-25 21:55:06 START begin_task: Starting task 'sending tracking commands' 2008-Apr-25 21:55:06 LOG5 begin_task: Level: (3) ID = <10372> Status = 0 0 0 0 ok 2008-Apr-25 21:55:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_061} INFO {Slewing to source 'AGESVC1A_p2_061' ...} 2008-Apr-25 21:55:06 INFO1 track_source: Starting to track AGESVC1A_p2_061 2008-Apr-25 21:55:06 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_061" 2008-Apr-25 21:55:06 LOG3 vw_send: To DATATAKING: set ra 332.09 2008-Apr-25 21:55:06 LOG3 vw_send: To DATATAKING: set dec 12.2546125789 2008-Apr-25 21:55:06 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-25 21:55:06 LOG3 vw_send: To DATATAKING: pnt tr 332.09 12.2546125789 -CF 2008-Apr-25 21:55:06 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-25 21:55:06 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-25 21:55:06 LOG5 finish_task: Level: (3) ID = <10372> Status = 0 0 0 0 ok 2008-Apr-25 21:55:06 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-25 21:55:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 21:55:06 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-25 21:55:06 LOG5 end_task: Level: (3) ID = <10372> Status = 0 0 0 0 ok 2008-Apr-25 21:55:06 LOG1 fixed_driftmap: Parameters: HA = -00:23:00.2 Start = 11:46:27.0 LST = 11:45:50.3 diff = 36.7 secs 2008-Apr-25 21:55:06 INFO2 fixed_driftmap: Waiting 34.7 seconds for RA 12:09:27 2008-Apr-25 21:55:06 INFO2 lstwait: Waiting for 34.6 secs from LST 11:45:50 to LST 11:46:25 ... 2008-Apr-25 21:55:06 LOG4 send_obs_status: To obs_status: <1> TASKTIME 34.619588716396144 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-25 21:55:06 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-25 21:55:06 LOG5 begin_task: Level: (3) ID = <10373> Status = 0 0 0 0 ok 2008-Apr-25 21:55:06 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_061" 2008-Apr-25 21:55:06 LOG4 got_cormsg: From DATATAKING: set ra 332.09 2008-Apr-25 21:55:06 LOG4 got_cormsg: From DATATAKING: set dec 12.2546125789 2008-Apr-25 21:55:06 LOG4 got_cormsg: From DATATAKING: vw% 332.09 2008-Apr-25 21:55:06 LOG4 got_cormsg: From DATATAKING: vw% 12.2546125789 2008-Apr-25 21:55:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 21:55:06 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-25 21:55:06 LOG4 got_cormsg: From DATATAKING: pnt tr 332.09 12.2546125789 -CF 2008-Apr-25 21:55:06 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-25 21:55:06 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-25 21:55:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 21:55:10 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.879 and 1.113 2008-Apr-25 21:55:40 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-25 21:55:40 LOG5 end_task: Level: (3) ID = <10373> Status = 0 0 0 0 ok 2008-Apr-25 21:55:41 LOG4 lstwait: Finished waiting, the gui caused difference: 0.38202716000554915 2008-Apr-25 21:55:41 INFO3 lstwait: Finished waiting 2008-Apr-25 21:55:41 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-25 21:55:41 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-25 21:55:41 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-25 21:55:41 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-25 21:55:41 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-25 21:55:41 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-25 21:55:41 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-25 21:55:41 LOG5 begin_task: Level: (3) ID = <10374> Status = 0 0 0 0 ok 2008-Apr-25 21:55:41 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-25 21:55:41 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-25 21:55:41 INFO2 take_spectra: Starting WAPP scan: 811600125 2008-Apr-25 21:55:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-25 21:55:41 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-25 21:55:41 LOG5 begin_task: Level: (4) ID = <10375> Status = 0 0 0 0 ok 2008-Apr-25 21:55:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 21:55:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6942.00 2008-Apr-25 21:55:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.163999 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 21:55:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.163999 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 21:55:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.163999 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 21:55:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.163999 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 21:55:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.163999 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 21:55:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.163999 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 21:55:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.163999 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 21:55:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.163999 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 21:55:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.163999 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 22:00:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.154 < 0.8)! 2008-Apr-25 22:00:35 LOG4 check_wapp_levels: WAPP-1 power levels: 1.122 0.154 0.884 1.083 2008-Apr-25 22:00:35 LOG4 check_wapp_levels: WAPP-2 power levels: 1.045 0.952 0.992 1.039 2008-Apr-25 22:00:35 LOG4 check_wapp_levels: WAPP-3 power levels: 0.920 0.955 1.002 0.894 2008-Apr-25 22:00:35 LOG4 check_wapp_levels: WAPP-4 power levels: 0.994 1.017 1.086 0.901 2008-Apr-25 22:00:37 INFO5 check_wapp_levels: WAPP power levels are between 0.159 and 1.113 (still bad) 2008-Apr-25 22:00:39 INFO5 check_wapp_levels: WAPP power levels are between 0.161 and 1.118 (still bad) 2008-Apr-25 22:00:41 INFO5 check_wapp_levels: WAPP power levels are between 0.164 and 1.121 (still bad) 2008-Apr-25 22:00:43 INFO5 check_wapp_levels: WAPP power levels are between 0.165 and 1.117 (still bad) 2008-Apr-25 22:00:45 INFO5 check_wapp_levels: WAPP power levels are between 0.167 and 1.115 (still bad) 2008-Apr-25 22:00:47 INFO5 check_wapp_levels: WAPP power levels are between 0.168 and 1.115 (still bad) 2008-Apr-25 22:00:49 INFO5 check_wapp_levels: WAPP power levels are between 0.168 and 1.116 (still bad) 2008-Apr-25 22:00:51 INFO5 check_wapp_levels: WAPP power levels are between 0.169 and 1.118 (still bad) 2008-Apr-25 22:00:53 INFO5 check_wapp_levels: WAPP power levels are between 0.169 and 1.121 (still bad) 2008-Apr-25 22:00:55 INFO5 check_wapp_levels: WAPP power levels are between 0.170 and 1.116 (still bad) 2008-Apr-25 22:00:57 INFO5 check_wapp_levels: WAPP power levels are between 0.170 and 1.115 (still bad) 2008-Apr-25 22:00:59 INFO5 check_wapp_levels: WAPP power levels are between 0.171 and 1.117 (still bad) 2008-Apr-25 22:01:01 INFO5 check_wapp_levels: WAPP power levels are between 0.172 and 1.118 (still bad) 2008-Apr-25 22:01:03 INFO5 check_wapp_levels: WAPP power levels are between 0.172 and 1.117 (still bad) 2008-Apr-25 22:01:05 INFO5 check_wapp_levels: WAPP power levels are between 0.172 and 1.115 (still bad) 2008-Apr-25 22:01:07 INFO5 check_wapp_levels: WAPP power levels are between 0.173 and 1.118 (still bad) 2008-Apr-25 22:01:09 INFO5 check_wapp_levels: WAPP power levels are between 0.172 and 1.117 (still bad) 2008-Apr-25 22:01:11 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.884 and 1.119 2008-Apr-25 22:01:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.260 < 0.8)! 2008-Apr-25 22:01:13 LOG4 check_wapp_levels: WAPP-1 power levels: 1.119 0.260 0.884 1.083 2008-Apr-25 22:01:13 LOG4 check_wapp_levels: WAPP-2 power levels: 1.042 0.948 0.984 1.034 2008-Apr-25 22:01:13 LOG4 check_wapp_levels: WAPP-3 power levels: 0.921 0.955 1.008 0.897 2008-Apr-25 22:01:13 LOG4 check_wapp_levels: WAPP-4 power levels: 0.996 1.019 1.087 0.902 2008-Apr-25 22:01:15 INFO5 check_wapp_levels: WAPP power levels are between 0.167 and 1.118 (still bad) 2008-Apr-25 22:01:17 INFO5 check_wapp_levels: WAPP power levels are between 0.172 and 1.119 (still bad) 2008-Apr-25 22:01:19 INFO5 check_wapp_levels: WAPP power levels are between 0.175 and 1.121 (still bad) 2008-Apr-25 22:01:21 INFO5 check_wapp_levels: WAPP power levels are between 0.179 and 1.116 (still bad) 2008-Apr-25 22:01:23 INFO5 check_wapp_levels: WAPP power levels are between 0.181 and 1.118 (still bad) 2008-Apr-25 22:01:25 INFO5 check_wapp_levels: WAPP power levels are between 0.184 and 1.117 (still bad) 2008-Apr-25 22:01:27 INFO5 check_wapp_levels: WAPP power levels are between 0.186 and 1.118 (still bad) 2008-Apr-25 22:01:29 INFO5 check_wapp_levels: WAPP power levels are between 0.188 and 1.120 (still bad) 2008-Apr-25 22:01:31 INFO5 check_wapp_levels: WAPP power levels are between 0.191 and 1.116 (still bad) 2008-Apr-25 22:01:33 INFO5 check_wapp_levels: WAPP power levels are between 0.193 and 1.117 (still bad) 2008-Apr-25 22:01:35 INFO5 check_wapp_levels: WAPP power levels are between 0.194 and 1.119 (still bad) 2008-Apr-25 22:01:37 INFO5 check_wapp_levels: WAPP power levels are between 0.196 and 1.118 (still bad) 2008-Apr-25 22:01:40 INFO5 check_wapp_levels: WAPP power levels are between 0.199 and 1.118 (still bad) 2008-Apr-25 22:01:42 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.883 and 1.121 2008-Apr-25 22:15:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 22:15:42 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-25 22:15:42 LOG5 end_task: Level: (4) ID = <10375> Status = 0 0 0 0 ok 2008-Apr-25 22:15:42 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-25 22:15:42 LOG5 end_task: Level: (3) ID = <10374> Status = 0 0 0 0 ok 2008-Apr-25 22:15:42 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-25 22:15:42 LOG5 finish_task: Level: (2) ID = <10341> Status = 0 0 0 0 ok 2008-Apr-25 22:15:42 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-25 22:15:42 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-25 22:15:42 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-25 22:15:42 LOG5 end_task: Level: (2) ID = <10341> Status = 0 0 0 0 ok 2008-Apr-25 22:15:42 COMMAND run_command_line: EXECUTING command 39: 'FIXEDDRIFT az=0.00 alfaangle=19.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_063 ra=120900.00 dec=72700.00' 2008-Apr-25 22:15:42 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-25 22:15:43 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-25 22:15:43 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 0.00 19.1 hcorcal 5 tracking no first 1 AGESVC1A_p2_063 120900.00 72700.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-25 22:15:43 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-25 22:15:43 LOG5 begin_task: Level: (2) ID = <10376> Status = 0 0 0 0 ok 2008-Apr-25 22:15:43 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGESVC1A_p2_061' 2008-Apr-25 22:15:43 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-25 22:15:43 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1A_p2_063} 2008-Apr-25 22:15:43 INFO3 fixed_driftmap: Sending telescope to Az = 0.00 and ZA = 10.95 2008-Apr-25 22:15:43 LOG3 track_source: Calling 'track_source AGESVC1A_p2_063 0.00 10.9525355633 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-25 22:15:43 START begin_task: Starting task 'sending tracking commands' 2008-Apr-25 22:15:43 LOG5 begin_task: Level: (3) ID = <10377> Status = 0 0 0 0 ok 2008-Apr-25 22:15:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_063} INFO {Slewing to source 'AGESVC1A_p2_063' ...} 2008-Apr-25 22:15:43 INFO1 track_source: Starting to track AGESVC1A_p2_063 2008-Apr-25 22:15:43 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_063" 2008-Apr-25 22:15:43 LOG3 vw_send: To DATATAKING: set ra 0.00 2008-Apr-25 22:15:43 LOG3 vw_send: To DATATAKING: set dec 10.9525355633 2008-Apr-25 22:15:43 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-25 22:15:43 LOG3 vw_send: To DATATAKING: pnt tr 0.00 10.9525355633 -CF 2008-Apr-25 22:15:43 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-25 22:15:43 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-25 22:15:43 LOG5 finish_task: Level: (3) ID = <10377> Status = 0 0 0 0 ok 2008-Apr-25 22:15:43 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-25 22:15:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 22:15:43 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-25 22:15:43 LOG5 end_task: Level: (3) ID = <10377> Status = 0 0 0 0 ok 2008-Apr-25 22:15:43 START begin_task: Starting task 'rotate ALFA to +19.1 degrees' 2008-Apr-25 22:15:43 LOG5 begin_task: Level: (3) ID = <10378> Status = 0 0 0 0 ok 2008-Apr-25 22:15:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19.1 degrees ...} 2008-Apr-25 22:15:43 INFO2 rotate_alfa: ALFA commanded to +19.1 degrees 2008-Apr-25 22:15:43 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19.1 REPLY 2008-Apr-25 22:15:43 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-25 22:15:43 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-25 22:15:43 LOG5 begin_task: Level: (4) ID = <10379> Status = 0 0 0 0 ok 2008-Apr-25 22:15:43 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_063" 2008-Apr-25 22:15:43 LOG4 got_cormsg: From DATATAKING: set ra 0.00 2008-Apr-25 22:15:43 LOG4 got_cormsg: From DATATAKING: set dec 10.9525355633 2008-Apr-25 22:15:43 LOG4 got_cormsg: From DATATAKING: vw% 0.00 2008-Apr-25 22:15:43 LOG4 got_cormsg: From DATATAKING: vw% 10.9525355633 2008-Apr-25 22:15:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 22:15:43 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-25 22:15:43 LOG4 got_cormsg: From DATATAKING: pnt tr 0.00 10.9525355633 -CF 2008-Apr-25 22:15:43 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-25 22:15:43 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-25 22:15:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 22:15:57 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-25 22:15:57 INFO3 alfa_motor: ALFA rotator in-position +19.10 degrees 2008-Apr-25 22:15:57 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-25 22:15:57 LOG5 end_task: Level: (4) ID = <10379> Status = 0 0 0 0 ok 2008-Apr-25 22:15:57 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-25 22:15:57 STOP finish_task: Finishing task 'rotate ALFA to +19.1 degrees' 2008-Apr-25 22:15:57 LOG5 finish_task: Level: (3) ID = <10378> Status = 0 0 0 0 ok 2008-Apr-25 22:15:57 INFO2 finish_task: DONE finished configuration: rotating ALFA to +19.1 degrees 2008-Apr-25 22:15:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 22:15:57 STOP end_task: Finishing task 'rotate ALFA to +19.1 degrees' with status 'OK' 2008-Apr-25 22:15:57 LOG5 end_task: Level: (3) ID = <10378> Status = 0 0 0 0 ok 2008-Apr-25 22:15:57 START begin_task: Starting task 'waiting on telescope' 2008-Apr-25 22:15:57 LOG5 begin_task: Level: (3) ID = <10380> Status = 0 0 0 0 ok 2008-Apr-25 22:15:57 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-25 22:15:57 LOG3 waittrk: Start waittrk 5 2008-Apr-25 22:15:57 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-25 22:15:57 LOG5 begin_task: Level: (4) ID = <10381> Status = 0 0 0 0 ok 2008-Apr-25 22:16:02 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-25 22:16:02 LOG5 end_task: Level: (4) ID = <10381> Status = 0 0 0 0 ok 2008-Apr-25 22:16:02 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-25 22:16:02 LOG5 begin_task: Level: (4) ID = <10382> Status = 0 0 0 0 ok 2008-Apr-25 22:17:05 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-25 22:17:05 LOG5 end_task: Level: (4) ID = <10382> Status = 0 0 0 0 ok 2008-Apr-25 22:17:05 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-25 22:17:05 INFO2 waittrk: Now tracking AGESVC1A_p2_063 2008-Apr-25 22:17:05 LOG4 waittrk: Current telescope position: Az = 359.64 ZA = 10.92 2008-Apr-25 22:17:05 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-25 22:17:05 LOG5 finish_task: Level: (3) ID = <10380> Status = 0 0 0 0 ok 2008-Apr-25 22:17:05 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-25 22:17:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 22:17:05 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-25 22:17:05 LOG5 end_task: Level: (3) ID = <10380> Status = 0 0 0 0 ok 2008-Apr-25 22:17:05 START begin_task: Starting task 'selecting calibration type' 2008-Apr-25 22:17:05 LOG5 begin_task: Level: (3) ID = <10383> Status = 0 0 0 0 ok 2008-Apr-25 22:17:05 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-25 22:17:05 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-25 22:17:05 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 22:17:05 START begin_task: Starting task 'waiting on setcal' 2008-Apr-25 22:17:05 LOG5 begin_task: Level: (4) ID = <10384> Status = 0 0 0 0 ok 2008-Apr-25 22:17:05 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-25 22:17:05 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 22:17:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 22:17:06 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-25 22:17:06 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-25 22:17:06 LOG5 end_task: Level: (4) ID = <10384> Status = 0 0 0 0 ok 2008-Apr-25 22:17:06 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-25 22:17:06 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 22:17:06 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-25 22:17:06 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 22:17:06 LOG5 begin_task: Level: (4) ID = <10385> Status = 0 0 0 0 ok 2008-Apr-25 22:17:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 22:17:08 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 22:17:08 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 22:17:08 LOG5 end_task: Level: (4) ID = <10385> Status = 0 0 0 0 ok 2008-Apr-25 22:17:08 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 22:17:08 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-25 22:17:08 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 22:17:08 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-25 22:17:08 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 22:17:08 LOG5 begin_task: Level: (4) ID = <10386> Status = 0 0 0 0 ok 2008-Apr-25 22:17:08 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 22:17:08 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 22:17:08 LOG5 end_task: Level: (4) ID = <10386> Status = 0 0 0 0 ok 2008-Apr-25 22:17:08 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 22:17:08 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-25 22:17:08 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-25 22:17:08 LOG5 finish_task: Level: (3) ID = <10383> Status = 0 0 0 0 ok 2008-Apr-25 22:17:08 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-25 22:17:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 22:17:08 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-25 22:17:08 LOG5 end_task: Level: (3) ID = <10383> Status = 0 0 0 0 ok 2008-Apr-25 22:17:08 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2008-Apr-25 22:17:08 INFO2 astwait: Waiting for 30 seconds from 02:17:08 to 02:17:38 UTC ... 2008-Apr-25 22:17:08 LOG4 send_obs_status: To obs_status: <1> TASKTIME 30 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-25 22:17:08 START begin_task: Starting task 'waiting on waiting for AST time' 2008-Apr-25 22:17:08 LOG5 begin_task: Level: (3) ID = <10387> Status = 0 0 0 0 ok 2008-Apr-25 22:17:38 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2008-Apr-25 22:17:38 LOG5 end_task: Level: (3) ID = <10387> Status = 0 0 0 0 ok 2008-Apr-25 22:17:38 INFO3 astwait: Finished waiting 2008-Apr-25 22:17:38 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-25 22:17:38 LOG5 dopset_later: Calling 'dopset_later 61.00903781038437' 2008-Apr-25 22:17:38 INFO3 dopset_later: Setting Doppler correction for 22:18:38 (61 seconds from now) 2008-Apr-25 22:17:38 LOG5 antvel: Calling 'antvel 0.000000 10.952536 F 61.00903781038437' 2008-Apr-25 22:17:38 LOG2 antvel: Parameters to Doppler: Heliocentric 94718 2008 116 0.0 2008-Apr-25 22:17:38 INFO5 antvel: Computed antenna velocity: +17.28449 km/s 2008-Apr-25 22:17:38 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=17.284486191900001 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-25 22:17:38 INFO4 dopset_gen: New sky frequencies: 1381.163798 1381.163798 1381.163798 1381.163798 1381.163798 1381.163798 1381.163798 1381.163798 1381.163798 2008-Apr-25 22:17:38 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.163798 sky0=1381.163798 sky1=1381.163798 sky2=1381.163798 sky3=1381.163798 sky4=1381.163798 sky5=1381.163798 sky6=1381.163798 sky7=1381.163798 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-25 22:17:38 LOG2 dopset_gen: Result from 'sky2syn': 1631.163798 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-25 22:17:38 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631163798.0} 2008-Apr-25 22:17:38 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 22:17:38 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-25 22:17:38 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-25 22:17:38 INFO5 fixed_driftmap: Tracking J2000 position: RA = 12:08:03.5 Dec = +07:26:51.2 2008-Apr-25 22:17:38 LOG3 track_source: Calling 'track_source AGESVC1A_p2_063 120803.5 072651.2 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-25 22:17:38 START begin_task: Starting task 'sending tracking commands' 2008-Apr-25 22:17:38 LOG5 begin_task: Level: (3) ID = <10388> Status = 0 0 0 0 ok 2008-Apr-25 22:17:38 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_063} INFO {Slewing to source 'AGESVC1A_p2_063' ...} 2008-Apr-25 22:17:38 INFO1 track_source: Starting to track AGESVC1A_p2_063 2008-Apr-25 22:17:38 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_063" 2008-Apr-25 22:17:38 LOG3 vw_send: To DATATAKING: set ra 120803.5 2008-Apr-25 22:17:38 LOG3 vw_send: To DATATAKING: set dec 072651.2 2008-Apr-25 22:17:38 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-25 22:17:38 LOG3 vw_send: To DATATAKING: pnt tr 120803.5 072651.2 -CJ 2008-Apr-25 22:17:38 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-25 22:17:38 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-25 22:17:38 LOG5 finish_task: Level: (3) ID = <10388> Status = 0 0 0 0 ok 2008-Apr-25 22:17:38 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-25 22:17:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 22:17:38 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-25 22:17:38 LOG5 end_task: Level: (3) ID = <10388> Status = 0 0 0 0 ok 2008-Apr-25 22:17:38 START begin_task: Starting task 'waiting on telescope' 2008-Apr-25 22:17:38 LOG5 begin_task: Level: (3) ID = <10389> Status = 0 0 0 0 ok 2008-Apr-25 22:17:38 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-25 22:17:38 LOG3 waittrk: Start waittrk 5 2008-Apr-25 22:17:38 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-25 22:17:38 LOG5 begin_task: Level: (4) ID = <10390> Status = 0 0 0 0 ok 2008-Apr-25 22:17:38 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631163798.0} 2008-Apr-25 22:17:38 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 22:17:38 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_063" 2008-Apr-25 22:17:38 LOG4 got_cormsg: From DATATAKING: set ra 120803.5 2008-Apr-25 22:17:38 LOG4 got_cormsg: From DATATAKING: set dec 072651.2 2008-Apr-25 22:17:38 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-25 22:17:38 LOG4 got_cormsg: From DATATAKING: vw% 120803.5 2008-Apr-25 22:17:38 LOG4 got_cormsg: From DATATAKING: vw% 072651.2 2008-Apr-25 22:17:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 22:17:38 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-25 22:17:38 LOG4 got_cormsg: From DATATAKING: pnt tr 120803.5 072651.2 -CJ 2008-Apr-25 22:17:38 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-25 22:17:38 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-25 22:17:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 22:17:43 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-25 22:17:43 LOG5 end_task: Level: (4) ID = <10390> Status = 0 0 0 0 ok 2008-Apr-25 22:17:43 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-25 22:17:43 LOG5 begin_task: Level: (4) ID = <10391> Status = 0 0 0 0 ok 2008-Apr-25 22:17:45 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-25 22:17:45 LOG5 end_task: Level: (4) ID = <10391> Status = 0 0 0 0 ok 2008-Apr-25 22:17:45 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-25 22:17:45 INFO2 waittrk: Now tracking AGESVC1A_p2_063 2008-Apr-25 22:17:45 LOG4 waittrk: Current telescope position: Az = 359.73 ZA = 10.92 2008-Apr-25 22:17:45 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-25 22:17:45 LOG5 finish_task: Level: (3) ID = <10389> Status = 0 0 0 0 ok 2008-Apr-25 22:17:45 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-25 22:17:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 22:17:45 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-25 22:17:45 LOG5 end_task: Level: (3) ID = <10389> Status = 0 0 0 0 ok 2008-Apr-25 22:17:45 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-25 22:17:45 LOG5 begin_task: Level: (3) ID = <10392> Status = 0 0 0 0 ok 2008-Apr-25 22:17:45 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-25 22:17:45 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-25 22:17:45 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-25 22:17:45 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-25 22:17:45 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 22:17:45 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-25 22:17:45 LOG5 begin_task: Level: (4) ID = <10393> Status = 0 0 0 0 ok 2008-Apr-25 22:17:45 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-25 22:17:45 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 22:17:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 22:17:46 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-25 22:17:46 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-25 22:17:46 LOG5 end_task: Level: (4) ID = <10393> Status = 0 0 0 0 ok 2008-Apr-25 22:17:46 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-25 22:17:46 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-25 22:17:46 LOG5 begin_task: Level: (4) ID = <10394> Status = 0 0 0 0 ok 2008-Apr-25 22:17:46 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-25 22:17:46 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-25 22:17:46 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-25 22:17:46 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-25 22:17:46 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-25 22:17:46 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-25 22:17:46 LOG5 begin_task: Level: (5) ID = <10395> Status = 0 0 0 0 ok 2008-Apr-25 22:17:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 22:17:46 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-25 22:17:46 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 2 dB --- beam 1: 7 6 dB 2008-Apr-25 22:17:46 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-25 22:17:46 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 5 dB 2008-Apr-25 22:17:46 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 2 3 dB 2008-Apr-25 22:17:46 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-25 22:17:46 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-25 22:17:46 LOG5 end_task: Level: (5) ID = <10395> Status = 0 0 0 0 ok 2008-Apr-25 22:17:46 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.115 0.898 ALFA beam 1: 1.129 1.083 2008-Apr-25 22:17:46 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.018 0.938 ALFA beam 3: 0.965 1.032 2008-Apr-25 22:17:46 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.922 0.954 ALFA beam 5: 1.011 1.125 2008-Apr-25 22:17:46 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.009 1.025 ALFA beam 7: 1.101 0.908 2008-Apr-25 22:17:46 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-25 22:17:46 LOG5 finish_task: Level: (4) ID = <10394> Status = 0 0 0 0 ok 2008-Apr-25 22:17:46 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-25 22:17:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 22:17:46 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-25 22:17:46 LOG5 end_task: Level: (4) ID = <10394> Status = 0 0 0 0 ok 2008-Apr-25 22:17:46 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-25 22:17:46 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-25 22:17:46 LOG5 finish_task: Level: (3) ID = <10392> Status = 0 0 0 0 ok 2008-Apr-25 22:17:46 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-25 22:17:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 22:17:46 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-25 22:17:46 LOG5 end_task: Level: (3) ID = <10392> Status = 0 0 0 0 ok 2008-Apr-25 22:17:46 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 EM, RM 2008-Apr-25 22:17:46 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 EM, RM 2008-Apr-25 22:17:46 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 EM, RM 2008-Apr-25 22:17:46 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 EM, RM 2008-Apr-25 22:17:47 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-25 22:17:47 START begin_task: Starting task 'WAPP calibration' 2008-Apr-25 22:17:47 LOG5 begin_task: Level: (3) ID = <10396> Status = 0 0 0 0 ok 2008-Apr-25 22:17:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-25 22:17:47 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-25 22:17:47 START begin_task: Starting task 'selecting calibration type' 2008-Apr-25 22:17:47 LOG5 begin_task: Level: (4) ID = <10397> Status = 0 0 0 0 ok 2008-Apr-25 22:17:47 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-25 22:17:47 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-25 22:17:47 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 22:17:47 START begin_task: Starting task 'waiting on setcal' 2008-Apr-25 22:17:47 LOG5 begin_task: Level: (5) ID = <10398> Status = 0 0 0 0 ok 2008-Apr-25 22:17:47 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 EM, RM' 2008-Apr-25 22:17:47 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-25 22:17:47 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 22:17:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 22:17:47 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-25 22:17:47 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-25 22:17:47 LOG5 end_task: Level: (5) ID = <10398> Status = 0 0 0 0 ok 2008-Apr-25 22:17:47 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-25 22:17:47 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 22:17:47 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-25 22:17:47 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 22:17:47 LOG5 begin_task: Level: (5) ID = <10399> Status = 0 0 0 0 ok 2008-Apr-25 22:17:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 22:17:47 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 22:17:47 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 22:17:47 LOG5 end_task: Level: (5) ID = <10399> Status = 0 0 0 0 ok 2008-Apr-25 22:17:47 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 22:17:47 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-25 22:17:47 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 22:17:47 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-25 22:17:47 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 22:17:47 LOG5 begin_task: Level: (5) ID = <10400> Status = 0 0 0 0 ok 2008-Apr-25 22:17:47 NOTE WAPPDATA-new_file: New FITS file: wapp.20080425.a2048.0009.fits 2008-Apr-25 22:17:47 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 22:17:47 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 22:17:47 LOG5 end_task: Level: (5) ID = <10400> Status = 0 0 0 0 ok 2008-Apr-25 22:17:47 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 22:17:47 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-25 22:17:47 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-25 22:17:47 LOG5 finish_task: Level: (4) ID = <10397> Status = 0 0 0 0 ok 2008-Apr-25 22:17:47 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-25 22:17:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 22:17:47 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-25 22:17:47 LOG5 end_task: Level: (4) ID = <10397> Status = 0 0 0 0 ok 2008-Apr-25 22:17:47 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-25 22:17:47 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-25 22:17:47 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-25 22:17:47 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-25 22:17:47 LOG5 begin_task: Level: (4) ID = <10401> Status = 0 0 0 0 ok 2008-Apr-25 22:17:47 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080425.a2048.0009.fits} 2008-Apr-25 22:17:47 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-25 22:17:47 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-25 22:17:47 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-25 22:17:47 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-25 22:17:47 LOG5 end_task: Level: (4) ID = <10401> Status = 0 0 0 0 ok 2008-Apr-25 22:17:47 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-25 22:17:47 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-25 22:17:47 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-25 22:17:47 LOG5 begin_task: Level: (4) ID = <10402> Status = 0 0 0 0 ok 2008-Apr-25 22:17:47 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-25 22:17:47 LOG5 log_alfabeam: Parameters: 12.134305555555555 7.4475555555555548 12.143340 2008.3201341990518 19.099895 2008-Apr-25 22:17:47 LOG4 log_alfabeam: ALFABEAM 0 12.134305555555912 7.447555555555556 2008-Apr-25 22:17:47 LOG4 log_alfabeam: ALFABEAM 1 12.133172257064803 7.552355810420870 2008-Apr-25 22:17:47 LOG4 log_alfabeam: ALFABEAM 2 12.128522300610049 7.483007092572552 2008-Apr-25 22:17:47 LOG4 log_alfabeam: ALFABEAM 3 12.129619931608291 7.378105399192793 2008-Apr-25 22:17:47 LOG4 log_alfabeam: ALFABEAM 4 12.135460267544449 7.342780745041777 2008-Apr-25 22:17:47 LOG4 log_alfabeam: ALFABEAM 5 12.140124557355126 7.412758468168420 2008-Apr-25 22:17:47 LOG4 log_alfabeam: ALFABEAM 6 12.138934217975203 7.517427492059919 2008-Apr-25 22:17:47 INFO2 take_spectra: Starting WAPP scan: 811600126 2008-Apr-25 22:17:48 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-25 22:17:48 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-25 22:17:48 LOG5 begin_task: Level: (5) ID = <10403> Status = 0 0 0 0 ok 2008-Apr-25 22:17:48 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 22:17:48 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8269.00 2008-Apr-25 22:17:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.163798 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 22:17:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.163798 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 22:17:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.163798 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 22:17:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.163798 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 22:17:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.163798 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 22:17:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.163798 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 22:17:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.163798 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 22:17:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.163798 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 22:17:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.163798 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 22:17:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 22:17:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.549 > 1.4)! 2008-Apr-25 22:17:54 LOG4 check_wapp_levels: WAPP-1 power levels: 1.545 1.191 1.531 1.459 2008-Apr-25 22:17:54 LOG4 check_wapp_levels: WAPP-2 power levels: 1.397 1.294 1.347 1.421 2008-Apr-25 22:17:54 LOG4 check_wapp_levels: WAPP-3 power levels: 1.293 1.334 1.413 1.520 2008-Apr-25 22:17:54 LOG4 check_wapp_levels: WAPP-4 power levels: 1.420 1.432 1.549 1.267 2008-Apr-25 22:17:54 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-25 22:17:54 LOG5 end_task: Level: (5) ID = <10403> Status = 0 0 0 0 ok 2008-Apr-25 22:17:54 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-25 22:17:54 LOG5 end_task: Level: (4) ID = <10402> Status = 0 0 0 0 ok 2008-Apr-25 22:17:54 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-25 22:17:54 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-25 22:17:54 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-25 22:17:54 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-25 22:17:54 LOG5 begin_task: Level: (4) ID = <10404> Status = 0 0 0 0 ok 2008-Apr-25 22:17:55 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-25 22:17:55 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-25 22:17:55 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-25 22:17:55 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-25 22:17:55 LOG5 end_task: Level: (4) ID = <10404> Status = 0 0 0 0 ok 2008-Apr-25 22:17:55 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-25 22:17:55 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-25 22:17:55 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-25 22:17:55 LOG5 begin_task: Level: (4) ID = <10405> Status = 0 0 0 0 ok 2008-Apr-25 22:17:55 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-25 22:17:55 LOG5 log_alfabeam: Parameters: 12.134305555555555 7.4475555555555548 12.145290 2008.3201344208685 19.099895 2008-Apr-25 22:17:55 LOG4 log_alfabeam: ALFABEAM 0 12.134305555555562 7.447555555555559 2008-Apr-25 22:17:55 LOG4 log_alfabeam: ALFABEAM 1 12.133190234062132 7.552398456084078 2008-Apr-25 22:17:55 LOG4 log_alfabeam: ALFABEAM 2 12.128528396825578 7.483226335965457 2008-Apr-25 22:17:55 LOG4 log_alfabeam: ALFABEAM 3 12.129608040082214 7.378283351102486 2008-Apr-25 22:17:55 LOG4 log_alfabeam: ALFABEAM 4 12.135442303096225 7.342737286647049 2008-Apr-25 22:17:55 LOG4 log_alfabeam: ALFABEAM 5 12.140118570917981 7.412537859849457 2008-Apr-25 22:17:55 LOG4 log_alfabeam: ALFABEAM 6 12.138946184513955 7.517251694821001 2008-Apr-25 22:17:55 INFO2 take_spectra: Starting WAPP scan: 811600127 2008-Apr-25 22:17:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-25 22:17:55 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-25 22:17:55 LOG5 begin_task: Level: (5) ID = <10406> Status = 0 0 0 0 ok 2008-Apr-25 22:17:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 22:17:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8276.00 2008-Apr-25 22:18:00 INFO5 check_wapp_levels: WAPP power levels are between 1.191 and 1.549 (still bad) 2008-Apr-25 22:18:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.163798 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 22:18:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.163798 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 22:18:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.163798 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 22:18:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.163798 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 22:18:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.163798 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 22:18:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.163798 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 22:18:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.163798 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 22:18:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.163798 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 22:18:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.163798 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 22:18:01 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-25 22:18:01 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 22:18:01 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-25 22:18:01 LOG5 end_task: Level: (5) ID = <10406> Status = 0 0 0 0 ok 2008-Apr-25 22:18:01 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-25 22:18:01 LOG5 end_task: Level: (4) ID = <10405> Status = 0 0 0 0 ok 2008-Apr-25 22:18:01 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-25 22:18:01 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-25 22:18:01 LOG5 finish_task: Level: (3) ID = <10396> Status = 0 0 0 0 ok 2008-Apr-25 22:18:01 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-25 22:18:01 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 22:18:01 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-25 22:18:01 LOG5 end_task: Level: (3) ID = <10396> Status = 0 0 0 0 ok 2008-Apr-25 22:18:01 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-25 22:18:02 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 0.00 and ZA = 10.95 2008-Apr-25 22:18:02 LOG3 track_source: Calling 'track_source AGESVC1A_p2_063 0.00 10.9525355633 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-25 22:18:02 START begin_task: Starting task 'sending tracking commands' 2008-Apr-25 22:18:02 LOG5 begin_task: Level: (3) ID = <10407> Status = 0 0 0 0 ok 2008-Apr-25 22:18:02 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_063} INFO {Slewing to source 'AGESVC1A_p2_063' ...} 2008-Apr-25 22:18:02 INFO1 track_source: Starting to track AGESVC1A_p2_063 2008-Apr-25 22:18:02 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_063" 2008-Apr-25 22:18:02 LOG3 vw_send: To DATATAKING: set ra 0.00 2008-Apr-25 22:18:02 LOG3 vw_send: To DATATAKING: set dec 10.9525355633 2008-Apr-25 22:18:02 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-25 22:18:02 LOG3 vw_send: To DATATAKING: pnt tr 0.00 10.9525355633 -CF 2008-Apr-25 22:18:02 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-25 22:18:02 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-25 22:18:02 LOG5 finish_task: Level: (3) ID = <10407> Status = 0 0 0 0 ok 2008-Apr-25 22:18:02 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-25 22:18:02 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 22:18:02 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-25 22:18:02 LOG5 end_task: Level: (3) ID = <10407> Status = 0 0 0 0 ok 2008-Apr-25 22:18:02 LOG1 fixed_driftmap: Parameters: HA = +00:00:00.0 Start = 12:09:27.2 LST = 12:08:50.1 diff = 37.1 secs 2008-Apr-25 22:18:02 INFO2 fixed_driftmap: Waiting 35.1 seconds for RA 12:09:27 2008-Apr-25 22:18:02 INFO2 lstwait: Waiting for 35 secs from LST 12:08:50 to LST 12:09:25 ... 2008-Apr-25 22:18:02 LOG4 send_obs_status: To obs_status: <1> TASKTIME 35.014208416787064 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-25 22:18:02 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-25 22:18:02 LOG5 begin_task: Level: (3) ID = <10408> Status = 0 0 0 0 ok 2008-Apr-25 22:18:02 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_063" 2008-Apr-25 22:18:02 LOG4 got_cormsg: From DATATAKING: set ra 0.00 2008-Apr-25 22:18:02 LOG4 got_cormsg: From DATATAKING: set dec 10.9525355633 2008-Apr-25 22:18:02 LOG4 got_cormsg: From DATATAKING: vw% 0.00 2008-Apr-25 22:18:02 LOG4 got_cormsg: From DATATAKING: vw% 10.9525355633 2008-Apr-25 22:18:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 22:18:02 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-25 22:18:02 LOG4 got_cormsg: From DATATAKING: pnt tr 0.00 10.9525355633 -CF 2008-Apr-25 22:18:02 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-25 22:18:02 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-25 22:18:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 22:18:07 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.907 and 1.133 2008-Apr-25 22:18:37 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-25 22:18:37 LOG5 end_task: Level: (3) ID = <10408> Status = 0 0 0 0 ok 2008-Apr-25 22:18:37 LOG4 lstwait: Finished waiting, the gui caused difference: 0.98712703999979112 2008-Apr-25 22:18:37 INFO3 lstwait: Finished waiting 2008-Apr-25 22:18:37 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-25 22:18:37 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-25 22:18:37 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-25 22:18:37 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-25 22:18:37 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-25 22:18:37 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-25 22:18:37 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-25 22:18:37 LOG5 begin_task: Level: (3) ID = <10409> Status = 0 0 0 0 ok 2008-Apr-25 22:18:37 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-25 22:18:37 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-25 22:18:37 INFO2 take_spectra: Starting WAPP scan: 811600128 2008-Apr-25 22:18:38 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-25 22:18:38 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-25 22:18:38 LOG5 begin_task: Level: (4) ID = <10410> Status = 0 0 0 0 ok 2008-Apr-25 22:18:38 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 22:18:38 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8319.00 2008-Apr-25 22:18:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.163798 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 22:18:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.163798 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 22:18:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.163798 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 22:18:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.163798 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 22:18:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.163798 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 22:18:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.163798 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 22:18:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.163798 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 22:18:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.163798 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 22:18:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.163798 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 22:21:47 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 22:21:47.297 (seconds: 80507.297)!} 2008-Apr-25 22:21:47 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 22:21:47.297 (seconds: 80507.297)! 2008-Apr-25 22:21:48 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 80506.0 to 80507.0! 2008-Apr-25 22:21:49 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (80506.0 - 80508.0)! 2008-Apr-25 22:29:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.799 < 0.8)! 2008-Apr-25 22:29:07 LOG4 check_wapp_levels: WAPP-1 power levels: 1.118 0.799 1.130 1.074 2008-Apr-25 22:29:07 LOG4 check_wapp_levels: WAPP-2 power levels: 1.020 0.936 0.965 1.032 2008-Apr-25 22:29:07 LOG4 check_wapp_levels: WAPP-3 power levels: 0.922 0.953 1.010 1.128 2008-Apr-25 22:29:07 LOG4 check_wapp_levels: WAPP-4 power levels: 1.009 1.025 1.100 0.908 2008-Apr-25 22:29:09 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.801 and 1.130 2008-Apr-25 22:29:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.799 < 0.8)! 2008-Apr-25 22:29:11 LOG4 check_wapp_levels: WAPP-1 power levels: 1.116 0.799 1.131 1.076 2008-Apr-25 22:29:11 LOG4 check_wapp_levels: WAPP-2 power levels: 1.020 0.938 0.965 1.032 2008-Apr-25 22:29:11 LOG4 check_wapp_levels: WAPP-3 power levels: 0.923 0.952 1.011 1.129 2008-Apr-25 22:29:11 LOG4 check_wapp_levels: WAPP-4 power levels: 1.008 1.025 1.100 0.908 2008-Apr-25 22:29:13 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.800 and 1.130 2008-Apr-25 22:29:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.799 < 0.8)! 2008-Apr-25 22:29:17 LOG4 check_wapp_levels: WAPP-1 power levels: 1.116 0.799 1.129 1.077 2008-Apr-25 22:29:17 LOG4 check_wapp_levels: WAPP-2 power levels: 1.018 0.937 0.965 1.031 2008-Apr-25 22:29:17 LOG4 check_wapp_levels: WAPP-3 power levels: 0.922 0.953 1.010 1.128 2008-Apr-25 22:29:17 LOG4 check_wapp_levels: WAPP-4 power levels: 1.008 1.026 1.100 0.908 2008-Apr-25 22:29:19 INFO5 check_wapp_levels: WAPP power levels are between 0.798 and 1.130 (still bad) 2008-Apr-25 22:29:21 INFO5 check_wapp_levels: WAPP power levels are between 0.799 and 1.130 (still bad) 2008-Apr-25 22:29:23 INFO5 check_wapp_levels: WAPP power levels are between 0.798 and 1.131 (still bad) 2008-Apr-25 22:29:25 INFO5 check_wapp_levels: WAPP power levels are between 0.798 and 1.131 (still bad) 2008-Apr-25 22:29:27 INFO5 check_wapp_levels: WAPP power levels are between 0.799 and 1.132 (still bad) 2008-Apr-25 22:29:29 INFO5 check_wapp_levels: WAPP power levels are between 0.799 and 1.131 (still bad) 2008-Apr-25 22:29:31 INFO5 check_wapp_levels: WAPP power levels are between 0.799 and 1.131 (still bad) 2008-Apr-25 22:29:33 INFO5 check_wapp_levels: WAPP power levels are between 0.797 and 1.132 (still bad) 2008-Apr-25 22:29:35 INFO5 check_wapp_levels: WAPP power levels are between 0.799 and 1.131 (still bad) 2008-Apr-25 22:29:37 INFO5 check_wapp_levels: WAPP power levels are between 0.798 and 1.131 (still bad) 2008-Apr-25 22:29:39 INFO5 check_wapp_levels: WAPP power levels are between 0.798 and 1.132 (still bad) 2008-Apr-25 22:29:41 INFO5 check_wapp_levels: WAPP power levels are between 0.799 and 1.133 (still bad) 2008-Apr-25 22:29:43 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.800 and 1.132 2008-Apr-25 22:29:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.799 < 0.8)! 2008-Apr-25 22:29:46 LOG4 check_wapp_levels: WAPP-1 power levels: 1.122 0.799 1.132 1.078 2008-Apr-25 22:29:46 LOG4 check_wapp_levels: WAPP-2 power levels: 1.020 0.936 0.967 1.033 2008-Apr-25 22:29:46 LOG4 check_wapp_levels: WAPP-3 power levels: 0.921 0.950 1.008 1.127 2008-Apr-25 22:29:46 LOG4 check_wapp_levels: WAPP-4 power levels: 1.008 1.025 1.102 0.907 2008-Apr-25 22:29:48 INFO5 check_wapp_levels: WAPP power levels are between 0.798 and 1.133 (still bad) 2008-Apr-25 22:29:50 INFO5 check_wapp_levels: WAPP power levels are between 0.797 and 1.133 (still bad) 2008-Apr-25 22:29:52 INFO5 check_wapp_levels: WAPP power levels are between 0.797 and 1.132 (still bad) 2008-Apr-25 22:29:54 INFO5 check_wapp_levels: WAPP power levels are between 0.797 and 1.131 (still bad) 2008-Apr-25 22:29:56 INFO5 check_wapp_levels: WAPP power levels are between 0.797 and 1.132 (still bad) 2008-Apr-25 22:29:58 INFO5 check_wapp_levels: WAPP power levels are between 0.796 and 1.132 (still bad) 2008-Apr-25 22:30:00 INFO5 check_wapp_levels: WAPP power levels are between 0.797 and 1.132 (still bad) 2008-Apr-25 22:30:02 INFO5 check_wapp_levels: WAPP power levels are between 0.799 and 1.131 (still bad) 2008-Apr-25 22:30:04 INFO5 check_wapp_levels: WAPP power levels are between 0.798 and 1.132 (still bad) 2008-Apr-25 22:30:06 INFO5 check_wapp_levels: WAPP power levels are between 0.798 and 1.132 (still bad) 2008-Apr-25 22:30:08 INFO5 check_wapp_levels: WAPP power levels are between 0.798 and 1.133 (still bad) 2008-Apr-25 22:30:10 INFO5 check_wapp_levels: WAPP power levels are between 0.797 and 1.134 (still bad) 2008-Apr-25 22:30:12 INFO5 check_wapp_levels: WAPP power levels are between 0.797 and 1.135 (still bad) 2008-Apr-25 22:30:14 INFO5 check_wapp_levels: WAPP power levels are between 0.796 and 1.135 (still bad) 2008-Apr-25 22:30:16 INFO5 check_wapp_levels: WAPP power levels are between 0.796 and 1.136 (still bad) 2008-Apr-25 22:30:18 INFO5 check_wapp_levels: WAPP power levels are between 0.796 and 1.136 (still bad) 2008-Apr-25 22:30:20 INFO5 check_wapp_levels: WAPP power levels are between 0.796 and 1.134 (still bad) 2008-Apr-25 22:30:22 INFO5 check_wapp_levels: WAPP power levels are between 0.798 and 1.132 (still bad) 2008-Apr-25 22:30:24 INFO5 check_wapp_levels: WAPP power levels are between 0.797 and 1.133 (still bad) 2008-Apr-25 22:30:26 INFO5 check_wapp_levels: WAPP power levels are between 0.795 and 1.131 (still bad) 2008-Apr-25 22:30:28 INFO5 check_wapp_levels: WAPP power levels are between 0.797 and 1.132 (still bad) 2008-Apr-25 22:30:30 INFO5 check_wapp_levels: WAPP power levels are between 0.796 and 1.132 (still bad) 2008-Apr-25 22:30:32 INFO5 check_wapp_levels: WAPP power levels are between 0.796 and 1.134 (still bad) 2008-Apr-25 22:30:34 INFO5 check_wapp_levels: WAPP power levels are between 0.796 and 1.136 (still bad) 2008-Apr-25 22:30:36 INFO5 check_wapp_levels: WAPP power levels are between 0.796 and 1.134 (still bad) 2008-Apr-25 22:30:38 INFO5 check_wapp_levels: WAPP power levels are between 0.797 and 1.132 (still bad) 2008-Apr-25 22:30:40 INFO5 check_wapp_levels: WAPP power levels are between 0.796 and 1.131 (still bad) 2008-Apr-25 22:30:42 INFO5 check_wapp_levels: WAPP power levels are between 0.793 and 1.132 (still bad) 2008-Apr-25 22:30:44 INFO5 check_wapp_levels: WAPP power levels are between 0.794 and 1.131 (still bad) 2008-Apr-25 22:30:46 INFO5 check_wapp_levels: WAPP power levels are between 0.794 and 1.133 (still bad) 2008-Apr-25 22:30:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.796 < 0.8)! 2008-Apr-25 22:30:48 LOG4 check_wapp_levels: WAPP-1 power levels: 1.121 0.796 1.132 1.081 2008-Apr-25 22:30:48 LOG4 check_wapp_levels: WAPP-2 power levels: 1.019 0.937 0.969 1.036 2008-Apr-25 22:30:48 LOG4 check_wapp_levels: WAPP-3 power levels: 0.918 0.951 1.010 1.125 2008-Apr-25 22:30:48 LOG4 check_wapp_levels: WAPP-4 power levels: 1.005 1.024 1.097 0.908 2008-Apr-25 22:30:50 INFO5 check_wapp_levels: WAPP power levels are between 0.796 and 1.132 (still bad) 2008-Apr-25 22:30:52 INFO5 check_wapp_levels: WAPP power levels are between 0.795 and 1.131 (still bad) 2008-Apr-25 22:30:54 INFO5 check_wapp_levels: WAPP power levels are between 0.795 and 1.132 (still bad) 2008-Apr-25 22:30:56 INFO5 check_wapp_levels: WAPP power levels are between 0.796 and 1.132 (still bad) 2008-Apr-25 22:30:58 INFO5 check_wapp_levels: WAPP power levels are between 0.797 and 1.133 (still bad) 2008-Apr-25 22:31:00 INFO5 check_wapp_levels: WAPP power levels are between 0.797 and 1.132 (still bad) 2008-Apr-25 22:31:02 INFO5 check_wapp_levels: WAPP power levels are between 0.796 and 1.132 (still bad) 2008-Apr-25 22:31:04 INFO5 check_wapp_levels: WAPP power levels are between 0.794 and 1.132 (still bad) 2008-Apr-25 22:31:06 INFO5 check_wapp_levels: WAPP power levels are between 0.793 and 1.133 (still bad) 2008-Apr-25 22:31:08 INFO5 check_wapp_levels: WAPP power levels are between 0.795 and 1.133 (still bad) 2008-Apr-25 22:31:11 INFO5 check_wapp_levels: WAPP power levels are between 0.795 and 1.133 (still bad) 2008-Apr-25 22:31:13 INFO5 check_wapp_levels: WAPP power levels are between 0.794 and 1.132 (still bad) 2008-Apr-25 22:31:15 INFO5 check_wapp_levels: WAPP power levels are between 0.794 and 1.132 (still bad) 2008-Apr-25 22:31:17 INFO5 check_wapp_levels: WAPP power levels are between 0.795 and 1.132 (still bad) 2008-Apr-25 22:31:19 INFO5 check_wapp_levels: WAPP power levels are between 0.794 and 1.132 (still bad) 2008-Apr-25 22:31:21 INFO5 check_wapp_levels: WAPP power levels are between 0.793 and 1.132 (still bad) 2008-Apr-25 22:31:23 INFO5 check_wapp_levels: WAPP power levels are between 0.793 and 1.132 (still bad) 2008-Apr-25 22:31:25 INFO5 check_wapp_levels: WAPP power levels are between 0.793 and 1.133 (still bad) 2008-Apr-25 22:31:27 INFO5 check_wapp_levels: WAPP power levels are between 0.793 and 1.133 (still bad) 2008-Apr-25 22:31:29 INFO5 check_wapp_levels: WAPP power levels are between 0.794 and 1.133 (still bad) 2008-Apr-25 22:31:31 INFO5 check_wapp_levels: WAPP power levels are between 0.793 and 1.132 (still bad) 2008-Apr-25 22:31:33 INFO5 check_wapp_levels: WAPP power levels are between 0.793 and 1.133 (still bad) 2008-Apr-25 22:31:35 INFO5 check_wapp_levels: WAPP power levels are between 0.793 and 1.133 (still bad) 2008-Apr-25 22:31:37 INFO5 check_wapp_levels: WAPP power levels are between 0.794 and 1.132 (still bad) 2008-Apr-25 22:31:39 INFO5 check_wapp_levels: WAPP power levels are between 0.794 and 1.133 (still bad) 2008-Apr-25 22:31:41 INFO5 check_wapp_levels: WAPP power levels are between 0.794 and 1.133 (still bad) 2008-Apr-25 22:31:43 INFO5 check_wapp_levels: WAPP power levels are between 0.793 and 1.134 (still bad) 2008-Apr-25 22:31:45 INFO5 check_wapp_levels: WAPP power levels are between 0.794 and 1.134 (still bad) 2008-Apr-25 22:31:47 INFO5 check_wapp_levels: WAPP power levels are between 0.793 and 1.136 (still bad) 2008-Apr-25 22:31:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.793 < 0.8)! 2008-Apr-25 22:31:49 LOG4 check_wapp_levels: WAPP-1 power levels: 1.119 0.793 1.136 1.082 2008-Apr-25 22:31:49 LOG4 check_wapp_levels: WAPP-2 power levels: 1.016 0.935 0.965 1.033 2008-Apr-25 22:31:49 LOG4 check_wapp_levels: WAPP-3 power levels: 0.917 0.949 1.010 1.129 2008-Apr-25 22:31:49 LOG4 check_wapp_levels: WAPP-4 power levels: 1.015 1.031 1.109 0.913 2008-Apr-25 22:31:51 INFO5 check_wapp_levels: WAPP power levels are between 0.792 and 1.135 (still bad) 2008-Apr-25 22:31:53 INFO5 check_wapp_levels: WAPP power levels are between 0.793 and 1.136 (still bad) 2008-Apr-25 22:31:55 INFO5 check_wapp_levels: WAPP power levels are between 0.792 and 1.135 (still bad) 2008-Apr-25 22:31:57 INFO5 check_wapp_levels: WAPP power levels are between 0.792 and 1.135 (still bad) 2008-Apr-25 22:31:59 INFO5 check_wapp_levels: WAPP power levels are between 0.794 and 1.133 (still bad) 2008-Apr-25 22:32:01 INFO5 check_wapp_levels: WAPP power levels are between 0.793 and 1.132 (still bad) 2008-Apr-25 22:32:03 INFO5 check_wapp_levels: WAPP power levels are between 0.793 and 1.132 (still bad) 2008-Apr-25 22:32:05 INFO5 check_wapp_levels: WAPP power levels are between 0.793 and 1.133 (still bad) 2008-Apr-25 22:32:07 INFO5 check_wapp_levels: WAPP power levels are between 0.794 and 1.133 (still bad) 2008-Apr-25 22:32:09 INFO5 check_wapp_levels: WAPP power levels are between 0.791 and 1.134 (still bad) 2008-Apr-25 22:32:11 INFO5 check_wapp_levels: WAPP power levels are between 0.792 and 1.135 (still bad) 2008-Apr-25 22:32:13 INFO5 check_wapp_levels: WAPP power levels are between 0.790 and 1.133 (still bad) 2008-Apr-25 22:32:15 INFO5 check_wapp_levels: WAPP power levels are between 0.791 and 1.132 (still bad) 2008-Apr-25 22:32:17 INFO5 check_wapp_levels: WAPP power levels are between 0.791 and 1.133 (still bad) 2008-Apr-25 22:32:19 INFO5 check_wapp_levels: WAPP power levels are between 0.791 and 1.133 (still bad) 2008-Apr-25 22:32:21 INFO5 check_wapp_levels: WAPP power levels are between 0.790 and 1.132 (still bad) 2008-Apr-25 22:32:23 INFO5 check_wapp_levels: WAPP power levels are between 0.790 and 1.133 (still bad) 2008-Apr-25 22:32:25 INFO5 check_wapp_levels: WAPP power levels are between 0.790 and 1.133 (still bad) 2008-Apr-25 22:32:27 INFO5 check_wapp_levels: WAPP power levels are between 0.790 and 1.133 (still bad) 2008-Apr-25 22:32:29 INFO5 check_wapp_levels: WAPP power levels are between 0.790 and 1.133 (still bad) 2008-Apr-25 22:32:31 INFO5 check_wapp_levels: WAPP power levels are between 0.791 and 1.133 (still bad) 2008-Apr-25 22:32:33 INFO5 check_wapp_levels: WAPP power levels are between 0.790 and 1.133 (still bad) 2008-Apr-25 22:32:36 INFO5 check_wapp_levels: WAPP power levels are between 0.790 and 1.132 (still bad) 2008-Apr-25 22:32:38 INFO5 check_wapp_levels: WAPP power levels are between 0.790 and 1.131 (still bad) 2008-Apr-25 22:32:40 INFO5 check_wapp_levels: WAPP power levels are between 0.790 and 1.132 (still bad) 2008-Apr-25 22:32:42 INFO5 check_wapp_levels: WAPP power levels are between 0.787 and 1.131 (still bad) 2008-Apr-25 22:32:44 INFO5 check_wapp_levels: WAPP power levels are between 0.789 and 1.131 (still bad) 2008-Apr-25 22:32:46 INFO5 check_wapp_levels: WAPP power levels are between 0.789 and 1.132 (still bad) 2008-Apr-25 22:32:48 INFO5 check_wapp_levels: WAPP power levels are between 0.790 and 1.132 (still bad) 2008-Apr-25 22:32:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.791 < 0.8)! 2008-Apr-25 22:32:50 LOG4 check_wapp_levels: WAPP-1 power levels: 1.124 0.791 1.131 1.076 2008-Apr-25 22:32:50 LOG4 check_wapp_levels: WAPP-2 power levels: 1.020 0.939 0.968 1.033 2008-Apr-25 22:32:50 LOG4 check_wapp_levels: WAPP-3 power levels: 0.923 0.956 1.012 1.127 2008-Apr-25 22:32:50 LOG4 check_wapp_levels: WAPP-4 power levels: 1.007 1.023 1.099 0.906 2008-Apr-25 22:32:52 INFO5 check_wapp_levels: WAPP power levels are between 0.792 and 1.133 (still bad) 2008-Apr-25 22:32:54 INFO5 check_wapp_levels: WAPP power levels are between 0.792 and 1.132 (still bad) 2008-Apr-25 22:32:56 INFO5 check_wapp_levels: WAPP power levels are between 0.791 and 1.133 (still bad) 2008-Apr-25 22:32:58 INFO5 check_wapp_levels: WAPP power levels are between 0.793 and 1.132 (still bad) 2008-Apr-25 22:33:00 INFO5 check_wapp_levels: WAPP power levels are between 0.794 and 1.132 (still bad) 2008-Apr-25 22:33:02 INFO5 check_wapp_levels: WAPP power levels are between 0.795 and 1.132 (still bad) 2008-Apr-25 22:33:04 INFO5 check_wapp_levels: WAPP power levels are between 0.792 and 1.131 (still bad) 2008-Apr-25 22:33:06 INFO5 check_wapp_levels: WAPP power levels are between 0.793 and 1.133 (still bad) 2008-Apr-25 22:33:08 INFO5 check_wapp_levels: WAPP power levels are between 0.792 and 1.131 (still bad) 2008-Apr-25 22:33:10 INFO5 check_wapp_levels: WAPP power levels are between 0.790 and 1.133 (still bad) 2008-Apr-25 22:33:12 INFO5 check_wapp_levels: WAPP power levels are between 0.790 and 1.133 (still bad) 2008-Apr-25 22:33:14 INFO5 check_wapp_levels: WAPP power levels are between 0.789 and 1.133 (still bad) 2008-Apr-25 22:33:16 INFO5 check_wapp_levels: WAPP power levels are between 0.791 and 1.134 (still bad) 2008-Apr-25 22:33:18 INFO5 check_wapp_levels: WAPP power levels are between 0.791 and 1.134 (still bad) 2008-Apr-25 22:33:20 INFO5 check_wapp_levels: WAPP power levels are between 0.791 and 1.133 (still bad) 2008-Apr-25 22:33:22 INFO5 check_wapp_levels: WAPP power levels are between 0.791 and 1.134 (still bad) 2008-Apr-25 22:33:24 INFO5 check_wapp_levels: WAPP power levels are between 0.789 and 1.132 (still bad) 2008-Apr-25 22:33:26 INFO5 check_wapp_levels: WAPP power levels are between 0.790 and 1.134 (still bad) 2008-Apr-25 22:33:28 INFO5 check_wapp_levels: WAPP power levels are between 0.790 and 1.133 (still bad) 2008-Apr-25 22:33:30 INFO5 check_wapp_levels: WAPP power levels are between 0.790 and 1.133 (still bad) 2008-Apr-25 22:33:32 INFO5 check_wapp_levels: WAPP power levels are between 0.789 and 1.132 (still bad) 2008-Apr-25 22:33:34 INFO5 check_wapp_levels: WAPP power levels are between 0.789 and 1.131 (still bad) 2008-Apr-25 22:33:36 INFO5 check_wapp_levels: WAPP power levels are between 0.788 and 1.134 (still bad) 2008-Apr-25 22:33:38 INFO5 check_wapp_levels: WAPP power levels are between 0.789 and 1.134 (still bad) 2008-Apr-25 22:33:40 INFO5 check_wapp_levels: WAPP power levels are between 0.788 and 1.133 (still bad) 2008-Apr-25 22:33:42 INFO5 check_wapp_levels: WAPP power levels are between 0.789 and 1.134 (still bad) 2008-Apr-25 22:33:44 INFO5 check_wapp_levels: WAPP power levels are between 0.788 and 1.133 (still bad) 2008-Apr-25 22:33:46 INFO5 check_wapp_levels: WAPP power levels are between 0.788 and 1.134 (still bad) 2008-Apr-25 22:33:48 INFO5 check_wapp_levels: WAPP power levels are between 0.788 and 1.132 (still bad) 2008-Apr-25 22:33:50 INFO5 check_wapp_levels: WAPP power levels are between 0.787 and 1.133 (still bad) 2008-Apr-25 22:33:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.787 < 0.8)! 2008-Apr-25 22:33:52 LOG4 check_wapp_levels: WAPP-1 power levels: 1.122 0.787 1.134 1.080 2008-Apr-25 22:33:52 LOG4 check_wapp_levels: WAPP-2 power levels: 1.019 0.940 0.969 1.035 2008-Apr-25 22:33:52 LOG4 check_wapp_levels: WAPP-3 power levels: 0.924 0.959 1.011 1.131 2008-Apr-25 22:33:52 LOG4 check_wapp_levels: WAPP-4 power levels: 1.008 1.024 1.099 0.908 2008-Apr-25 22:33:54 INFO5 check_wapp_levels: WAPP power levels are between 0.788 and 1.133 (still bad) 2008-Apr-25 22:33:56 INFO5 check_wapp_levels: WAPP power levels are between 0.788 and 1.133 (still bad) 2008-Apr-25 22:33:59 INFO5 check_wapp_levels: WAPP power levels are between 0.786 and 1.134 (still bad) 2008-Apr-25 22:34:01 INFO5 check_wapp_levels: WAPP power levels are between 0.786 and 1.135 (still bad) 2008-Apr-25 22:34:03 INFO5 check_wapp_levels: WAPP power levels are between 0.787 and 1.135 (still bad) 2008-Apr-25 22:34:05 INFO5 check_wapp_levels: WAPP power levels are between 0.786 and 1.136 (still bad) 2008-Apr-25 22:34:07 INFO5 check_wapp_levels: WAPP power levels are between 0.788 and 1.134 (still bad) 2008-Apr-25 22:34:09 INFO5 check_wapp_levels: WAPP power levels are between 0.787 and 1.135 (still bad) 2008-Apr-25 22:34:11 INFO5 check_wapp_levels: WAPP power levels are between 0.786 and 1.134 (still bad) 2008-Apr-25 22:34:13 INFO5 check_wapp_levels: WAPP power levels are between 0.786 and 1.134 (still bad) 2008-Apr-25 22:34:15 INFO5 check_wapp_levels: WAPP power levels are between 0.784 and 1.135 (still bad) 2008-Apr-25 22:34:17 INFO5 check_wapp_levels: WAPP power levels are between 0.788 and 1.133 (still bad) 2008-Apr-25 22:34:19 INFO5 check_wapp_levels: WAPP power levels are between 0.787 and 1.134 (still bad) 2008-Apr-25 22:34:21 INFO5 check_wapp_levels: WAPP power levels are between 0.788 and 1.133 (still bad) 2008-Apr-25 22:34:23 INFO5 check_wapp_levels: WAPP power levels are between 0.787 and 1.134 (still bad) 2008-Apr-25 22:34:25 INFO5 check_wapp_levels: WAPP power levels are between 0.788 and 1.133 (still bad) 2008-Apr-25 22:34:27 INFO5 check_wapp_levels: WAPP power levels are between 0.788 and 1.133 (still bad) 2008-Apr-25 22:34:29 INFO5 check_wapp_levels: WAPP power levels are between 0.787 and 1.133 (still bad) 2008-Apr-25 22:34:31 INFO5 check_wapp_levels: WAPP power levels are between 0.787 and 1.133 (still bad) 2008-Apr-25 22:34:33 INFO5 check_wapp_levels: WAPP power levels are between 0.787 and 1.134 (still bad) 2008-Apr-25 22:34:35 INFO5 check_wapp_levels: WAPP power levels are between 0.787 and 1.134 (still bad) 2008-Apr-25 22:34:37 INFO5 check_wapp_levels: WAPP power levels are between 0.786 and 1.134 (still bad) 2008-Apr-25 22:34:39 INFO5 check_wapp_levels: WAPP power levels are between 0.786 and 1.134 (still bad) 2008-Apr-25 22:34:41 INFO5 check_wapp_levels: WAPP power levels are between 0.785 and 1.134 (still bad) 2008-Apr-25 22:34:43 INFO5 check_wapp_levels: WAPP power levels are between 0.787 and 1.134 (still bad) 2008-Apr-25 22:34:45 INFO5 check_wapp_levels: WAPP power levels are between 0.786 and 1.132 (still bad) 2008-Apr-25 22:34:47 INFO5 check_wapp_levels: WAPP power levels are between 0.787 and 1.133 (still bad) 2008-Apr-25 22:34:49 INFO5 check_wapp_levels: WAPP power levels are between 0.786 and 1.133 (still bad) 2008-Apr-25 22:34:51 INFO5 check_wapp_levels: WAPP power levels are between 0.787 and 1.135 (still bad) 2008-Apr-25 22:34:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.788 < 0.8)! 2008-Apr-25 22:34:53 LOG4 check_wapp_levels: WAPP-1 power levels: 1.125 0.788 1.132 1.079 2008-Apr-25 22:34:53 LOG4 check_wapp_levels: WAPP-2 power levels: 1.021 0.941 0.969 1.036 2008-Apr-25 22:34:53 LOG4 check_wapp_levels: WAPP-3 power levels: 0.932 0.965 1.016 1.134 2008-Apr-25 22:34:53 LOG4 check_wapp_levels: WAPP-4 power levels: 1.010 1.023 1.102 0.910 2008-Apr-25 22:34:55 INFO5 check_wapp_levels: WAPP power levels are between 0.788 and 1.134 (still bad) 2008-Apr-25 22:34:57 INFO5 check_wapp_levels: WAPP power levels are between 0.788 and 1.134 (still bad) 2008-Apr-25 22:34:59 INFO5 check_wapp_levels: WAPP power levels are between 0.788 and 1.133 (still bad) 2008-Apr-25 22:35:01 INFO5 check_wapp_levels: WAPP power levels are between 0.788 and 1.133 (still bad) 2008-Apr-25 22:35:03 INFO5 check_wapp_levels: WAPP power levels are between 0.788 and 1.135 (still bad) 2008-Apr-25 22:35:05 INFO5 check_wapp_levels: WAPP power levels are between 0.788 and 1.134 (still bad) 2008-Apr-25 22:35:07 INFO5 check_wapp_levels: WAPP power levels are between 0.786 and 1.134 (still bad) 2008-Apr-25 22:35:09 INFO5 check_wapp_levels: WAPP power levels are between 0.787 and 1.135 (still bad) 2008-Apr-25 22:35:11 INFO5 check_wapp_levels: WAPP power levels are between 0.786 and 1.134 (still bad) 2008-Apr-25 22:35:13 INFO5 check_wapp_levels: WAPP power levels are between 0.786 and 1.134 (still bad) 2008-Apr-25 22:35:15 INFO5 check_wapp_levels: WAPP power levels are between 0.786 and 1.134 (still bad) 2008-Apr-25 22:35:17 INFO5 check_wapp_levels: WAPP power levels are between 0.784 and 1.135 (still bad) 2008-Apr-25 22:35:19 INFO5 check_wapp_levels: WAPP power levels are between 0.786 and 1.135 (still bad) 2008-Apr-25 22:35:21 INFO5 check_wapp_levels: WAPP power levels are between 0.786 and 1.135 (still bad) 2008-Apr-25 22:35:24 INFO5 check_wapp_levels: WAPP power levels are between 0.786 and 1.136 (still bad) 2008-Apr-25 22:35:26 INFO5 check_wapp_levels: WAPP power levels are between 0.786 and 1.137 (still bad) 2008-Apr-25 22:35:28 INFO5 check_wapp_levels: WAPP power levels are between 0.784 and 1.136 (still bad) 2008-Apr-25 22:35:30 INFO5 check_wapp_levels: WAPP power levels are between 0.786 and 1.138 (still bad) 2008-Apr-25 22:35:32 INFO5 check_wapp_levels: WAPP power levels are between 0.786 and 1.138 (still bad) 2008-Apr-25 22:35:34 INFO5 check_wapp_levels: WAPP power levels are between 0.784 and 1.138 (still bad) 2008-Apr-25 22:35:36 INFO5 check_wapp_levels: WAPP power levels are between 0.785 and 1.138 (still bad) 2008-Apr-25 22:35:38 INFO5 check_wapp_levels: WAPP power levels are between 0.783 and 1.139 (still bad) 2008-Apr-25 22:35:40 INFO5 check_wapp_levels: WAPP power levels are between 0.786 and 1.138 (still bad) 2008-Apr-25 22:35:42 INFO5 check_wapp_levels: WAPP power levels are between 0.786 and 1.138 (still bad) 2008-Apr-25 22:35:44 INFO5 check_wapp_levels: WAPP power levels are between 0.787 and 1.136 (still bad) 2008-Apr-25 22:35:46 INFO5 check_wapp_levels: WAPP power levels are between 0.785 and 1.136 (still bad) 2008-Apr-25 22:35:48 INFO5 check_wapp_levels: WAPP power levels are between 0.786 and 1.134 (still bad) 2008-Apr-25 22:35:50 INFO5 check_wapp_levels: WAPP power levels are between 0.787 and 1.136 (still bad) 2008-Apr-25 22:35:52 INFO5 check_wapp_levels: WAPP power levels are between 0.785 and 1.136 (still bad) 2008-Apr-25 22:35:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.786 < 0.8)! 2008-Apr-25 22:35:54 LOG4 check_wapp_levels: WAPP-1 power levels: 1.126 0.786 1.136 1.082 2008-Apr-25 22:35:54 LOG4 check_wapp_levels: WAPP-2 power levels: 1.020 0.938 0.970 1.037 2008-Apr-25 22:35:54 LOG4 check_wapp_levels: WAPP-3 power levels: 0.924 0.958 1.016 1.132 2008-Apr-25 22:35:54 LOG4 check_wapp_levels: WAPP-4 power levels: 1.011 1.025 1.104 0.909 2008-Apr-25 22:35:56 INFO5 check_wapp_levels: WAPP power levels are between 0.785 and 1.135 (still bad) 2008-Apr-25 22:35:58 INFO5 check_wapp_levels: WAPP power levels are between 0.787 and 1.136 (still bad) 2008-Apr-25 22:36:00 INFO5 check_wapp_levels: WAPP power levels are between 0.784 and 1.137 (still bad) 2008-Apr-25 22:36:02 INFO5 check_wapp_levels: WAPP power levels are between 0.786 and 1.137 (still bad) 2008-Apr-25 22:36:04 INFO5 check_wapp_levels: WAPP power levels are between 0.783 and 1.136 (still bad) 2008-Apr-25 22:36:06 INFO5 check_wapp_levels: WAPP power levels are between 0.786 and 1.139 (still bad) 2008-Apr-25 22:36:08 INFO5 check_wapp_levels: WAPP power levels are between 0.783 and 1.139 (still bad) 2008-Apr-25 22:36:10 INFO5 check_wapp_levels: WAPP power levels are between 0.784 and 1.140 (still bad) 2008-Apr-25 22:36:12 INFO5 check_wapp_levels: WAPP power levels are between 0.782 and 1.139 (still bad) 2008-Apr-25 22:36:14 INFO5 check_wapp_levels: WAPP power levels are between 0.783 and 1.139 (still bad) 2008-Apr-25 22:36:16 INFO5 check_wapp_levels: WAPP power levels are between 0.782 and 1.138 (still bad) 2008-Apr-25 22:36:18 INFO5 check_wapp_levels: WAPP power levels are between 0.782 and 1.137 (still bad) 2008-Apr-25 22:36:20 INFO5 check_wapp_levels: WAPP power levels are between 0.782 and 1.136 (still bad) 2008-Apr-25 22:36:22 INFO5 check_wapp_levels: WAPP power levels are between 0.783 and 1.135 (still bad) 2008-Apr-25 22:36:24 INFO5 check_wapp_levels: WAPP power levels are between 0.783 and 1.135 (still bad) 2008-Apr-25 22:36:26 INFO5 check_wapp_levels: WAPP power levels are between 0.784 and 1.136 (still bad) 2008-Apr-25 22:36:28 INFO5 check_wapp_levels: WAPP power levels are between 0.783 and 1.137 (still bad) 2008-Apr-25 22:36:30 INFO5 check_wapp_levels: WAPP power levels are between 0.785 and 1.137 (still bad) 2008-Apr-25 22:36:32 INFO5 check_wapp_levels: WAPP power levels are between 0.786 and 1.137 (still bad) 2008-Apr-25 22:36:34 INFO5 check_wapp_levels: WAPP power levels are between 0.785 and 1.138 (still bad) 2008-Apr-25 22:36:36 INFO5 check_wapp_levels: WAPP power levels are between 0.784 and 1.136 (still bad) 2008-Apr-25 22:36:38 INFO5 check_wapp_levels: WAPP power levels are between 0.783 and 1.137 (still bad) 2008-Apr-25 22:36:40 INFO5 check_wapp_levels: WAPP power levels are between 0.782 and 1.136 (still bad) 2008-Apr-25 22:36:42 INFO5 check_wapp_levels: WAPP power levels are between 0.784 and 1.137 (still bad) 2008-Apr-25 22:36:44 INFO5 check_wapp_levels: WAPP power levels are between 0.785 and 1.136 (still bad) 2008-Apr-25 22:36:46 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 22:36:46.297 (seconds: 81406.297)!} 2008-Apr-25 22:36:46 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 22:36:46.297 (seconds: 81406.297)! 2008-Apr-25 22:36:46 INFO5 check_wapp_levels: WAPP power levels are between 0.783 and 1.137 (still bad) 2008-Apr-25 22:36:47 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 81405.0 to 81406.0! 2008-Apr-25 22:36:48 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (81405.0 - 81407.0)! 2008-Apr-25 22:36:49 INFO5 check_wapp_levels: WAPP power levels are between 0.783 and 1.141 (still bad) 2008-Apr-25 22:36:51 INFO5 check_wapp_levels: WAPP power levels are between 0.783 and 1.147 (still bad) 2008-Apr-25 22:36:53 INFO5 check_wapp_levels: WAPP power levels are between 0.782 and 1.154 (still bad) 2008-Apr-25 22:36:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.782 < 0.8)! 2008-Apr-25 22:36:55 LOG4 check_wapp_levels: WAPP-1 power levels: 1.122 0.782 1.137 1.083 2008-Apr-25 22:36:55 LOG4 check_wapp_levels: WAPP-2 power levels: 1.022 0.940 0.969 1.036 2008-Apr-25 22:36:55 LOG4 check_wapp_levels: WAPP-3 power levels: 0.923 0.957 1.037 1.160 2008-Apr-25 22:36:55 LOG4 check_wapp_levels: WAPP-4 power levels: 1.012 1.025 1.105 0.908 2008-Apr-25 22:36:57 INFO5 check_wapp_levels: WAPP power levels are between 0.782 and 1.160 (still bad) 2008-Apr-25 22:36:59 INFO5 check_wapp_levels: WAPP power levels are between 0.780 and 1.155 (still bad) 2008-Apr-25 22:37:01 INFO5 check_wapp_levels: WAPP power levels are between 0.782 and 1.150 (still bad) 2008-Apr-25 22:37:03 INFO5 check_wapp_levels: WAPP power levels are between 0.781 and 1.146 (still bad) 2008-Apr-25 22:37:05 INFO5 check_wapp_levels: WAPP power levels are between 0.780 and 1.157 (still bad) 2008-Apr-25 22:37:07 INFO5 check_wapp_levels: WAPP power levels are between 0.780 and 1.181 (still bad) 2008-Apr-25 22:37:09 INFO5 check_wapp_levels: WAPP power levels are between 0.782 and 1.218 (still bad) 2008-Apr-25 22:37:11 INFO5 check_wapp_levels: WAPP power levels are between 0.783 and 1.254 (still bad) 2008-Apr-25 22:37:13 INFO5 check_wapp_levels: WAPP power levels are between 0.785 and 1.287 (still bad) 2008-Apr-25 22:37:15 INFO5 check_wapp_levels: WAPP power levels are between 0.783 and 1.302 (still bad) 2008-Apr-25 22:37:17 INFO5 check_wapp_levels: WAPP power levels are between 0.783 and 1.297 (still bad) 2008-Apr-25 22:37:19 INFO5 check_wapp_levels: WAPP power levels are between 0.784 and 1.271 (still bad) 2008-Apr-25 22:37:21 INFO5 check_wapp_levels: WAPP power levels are between 0.784 and 1.237 (still bad) 2008-Apr-25 22:37:23 INFO5 check_wapp_levels: WAPP power levels are between 0.787 and 1.202 (still bad) 2008-Apr-25 22:37:25 INFO5 check_wapp_levels: WAPP power levels are between 0.794 and 1.170 (still bad) 2008-Apr-25 22:37:27 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.803 and 1.168 2008-Apr-25 22:37:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.792 < 0.8)! 2008-Apr-25 22:37:45 LOG4 check_wapp_levels: WAPP-1 power levels: 1.145 0.792 1.134 1.079 2008-Apr-25 22:37:45 LOG4 check_wapp_levels: WAPP-2 power levels: 1.048 0.964 0.981 1.050 2008-Apr-25 22:37:45 LOG4 check_wapp_levels: WAPP-3 power levels: 0.924 0.957 1.016 1.129 2008-Apr-25 22:37:45 LOG4 check_wapp_levels: WAPP-4 power levels: 1.007 1.024 1.100 0.907 2008-Apr-25 22:37:47 INFO5 check_wapp_levels: WAPP power levels are between 0.785 and 1.135 (still bad) 2008-Apr-25 22:37:49 INFO5 check_wapp_levels: WAPP power levels are between 0.782 and 1.135 (still bad) 2008-Apr-25 22:37:51 INFO5 check_wapp_levels: WAPP power levels are between 0.782 and 1.136 (still bad) 2008-Apr-25 22:37:53 INFO5 check_wapp_levels: WAPP power levels are between 0.784 and 1.137 (still bad) 2008-Apr-25 22:37:55 INFO5 check_wapp_levels: WAPP power levels are between 0.784 and 1.137 (still bad) 2008-Apr-25 22:37:57 INFO5 check_wapp_levels: WAPP power levels are between 0.786 and 1.137 (still bad) 2008-Apr-25 22:37:59 INFO5 check_wapp_levels: WAPP power levels are between 0.784 and 1.138 (still bad) 2008-Apr-25 22:38:01 INFO5 check_wapp_levels: WAPP power levels are between 0.781 and 1.139 (still bad) 2008-Apr-25 22:38:03 INFO5 check_wapp_levels: WAPP power levels are between 0.780 and 1.138 (still bad) 2008-Apr-25 22:38:05 INFO5 check_wapp_levels: WAPP power levels are between 0.780 and 1.139 (still bad) 2008-Apr-25 22:38:07 INFO5 check_wapp_levels: WAPP power levels are between 0.780 and 1.138 (still bad) 2008-Apr-25 22:38:09 INFO5 check_wapp_levels: WAPP power levels are between 0.781 and 1.137 (still bad) 2008-Apr-25 22:38:11 INFO5 check_wapp_levels: WAPP power levels are between 0.781 and 1.137 (still bad) 2008-Apr-25 22:38:13 INFO5 check_wapp_levels: WAPP power levels are between 0.780 and 1.137 (still bad) 2008-Apr-25 22:38:16 INFO5 check_wapp_levels: WAPP power levels are between 0.779 and 1.137 (still bad) 2008-Apr-25 22:38:18 INFO5 check_wapp_levels: WAPP power levels are between 0.779 and 1.138 (still bad) 2008-Apr-25 22:38:20 INFO5 check_wapp_levels: WAPP power levels are between 0.779 and 1.138 (still bad) 2008-Apr-25 22:38:22 INFO5 check_wapp_levels: WAPP power levels are between 0.780 and 1.136 (still bad) 2008-Apr-25 22:38:24 INFO5 check_wapp_levels: WAPP power levels are between 0.781 and 1.137 (still bad) 2008-Apr-25 22:38:26 INFO5 check_wapp_levels: WAPP power levels are between 0.781 and 1.137 (still bad) 2008-Apr-25 22:38:28 INFO5 check_wapp_levels: WAPP power levels are between 0.779 and 1.137 (still bad) 2008-Apr-25 22:38:30 INFO5 check_wapp_levels: WAPP power levels are between 0.781 and 1.137 (still bad) 2008-Apr-25 22:38:32 INFO5 check_wapp_levels: WAPP power levels are between 0.783 and 1.137 (still bad) 2008-Apr-25 22:38:34 INFO5 check_wapp_levels: WAPP power levels are between 0.780 and 1.137 (still bad) 2008-Apr-25 22:38:36 INFO5 check_wapp_levels: WAPP power levels are between 0.781 and 1.137 (still bad) 2008-Apr-25 22:38:38 INFO5 check_wapp_levels: WAPP power levels are between 0.779 and 1.138 (still bad) 2008-Apr-25 22:38:39 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 22:38:39 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-25 22:38:39 LOG5 end_task: Level: (4) ID = <10410> Status = 0 0 0 0 ok 2008-Apr-25 22:38:39 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-25 22:38:39 LOG5 end_task: Level: (3) ID = <10409> Status = 0 0 0 0 ok 2008-Apr-25 22:38:39 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-25 22:38:39 LOG5 finish_task: Level: (2) ID = <10376> Status = 0 0 0 0 ok 2008-Apr-25 22:38:39 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-25 22:38:39 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-25 22:38:39 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-25 22:38:39 LOG5 end_task: Level: (2) ID = <10376> Status = 0 0 0 0 ok 2008-Apr-25 22:38:39 COMMAND run_command_line: EXECUTING command 43: 'FIXEDDRIFT az=27.70 alfaangle=-3.9 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_065 ra=120900.00 dec=72400.00' 2008-Apr-25 22:38:39 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-25 22:38:40 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-25 22:38:40 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 27.70 -3.9 hcorcal 5 tracking no first 1 AGESVC1A_p2_065 120900.00 72400.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-25 22:38:40 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-25 22:38:40 LOG5 begin_task: Level: (2) ID = <10411> Status = 0 0 0 0 ok 2008-Apr-25 22:38:40 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGESVC1A_p2_063' 2008-Apr-25 22:38:40 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-25 22:38:40 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1A_p2_065} 2008-Apr-25 22:38:40 INFO3 fixed_driftmap: Sending telescope to Az = 27.70 and ZA = 12.34 2008-Apr-25 22:38:40 LOG3 track_source: Calling 'track_source AGESVC1A_p2_065 27.70 12.3440554064 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-25 22:38:40 START begin_task: Starting task 'sending tracking commands' 2008-Apr-25 22:38:40 LOG5 begin_task: Level: (3) ID = <10412> Status = 0 0 0 0 ok 2008-Apr-25 22:38:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_065} INFO {Slewing to source 'AGESVC1A_p2_065' ...} 2008-Apr-25 22:38:40 INFO1 track_source: Starting to track AGESVC1A_p2_065 2008-Apr-25 22:38:40 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_065" 2008-Apr-25 22:38:40 LOG3 vw_send: To DATATAKING: set ra 27.70 2008-Apr-25 22:38:40 LOG3 vw_send: To DATATAKING: set dec 12.3440554064 2008-Apr-25 22:38:40 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-25 22:38:40 LOG3 vw_send: To DATATAKING: pnt tr 27.70 12.3440554064 -CF 2008-Apr-25 22:38:40 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-25 22:38:40 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-25 22:38:40 LOG5 finish_task: Level: (3) ID = <10412> Status = 0 0 0 0 ok 2008-Apr-25 22:38:40 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-25 22:38:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 22:38:40 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-25 22:38:40 LOG5 end_task: Level: (3) ID = <10412> Status = 0 0 0 0 ok 2008-Apr-25 22:38:40 START begin_task: Starting task 'rotate ALFA to -3.9 degrees' 2008-Apr-25 22:38:40 LOG5 begin_task: Level: (3) ID = <10413> Status = 0 0 0 0 ok 2008-Apr-25 22:38:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -3.9 degrees ...} 2008-Apr-25 22:38:40 INFO2 rotate_alfa: ALFA commanded to -3.9 degrees 2008-Apr-25 22:38:40 LOG3 sock_errsend: To ALFAMOTOR: POSITION -3.9 REPLY 2008-Apr-25 22:38:40 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-25 22:38:40 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-25 22:38:40 LOG5 begin_task: Level: (4) ID = <10414> Status = 0 0 0 0 ok 2008-Apr-25 22:38:40 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_065" 2008-Apr-25 22:38:40 INFO5 check_wapp_levels: WAPP power levels are between 0.780 and 1.138 (still bad) 2008-Apr-25 22:38:40 LOG4 got_cormsg: From DATATAKING: set ra 27.70 2008-Apr-25 22:38:40 LOG4 got_cormsg: From DATATAKING: set dec 12.3440554064 2008-Apr-25 22:38:40 LOG4 got_cormsg: From DATATAKING: vw% 27.70 2008-Apr-25 22:38:40 LOG4 got_cormsg: From DATATAKING: vw% 12.3440554064 2008-Apr-25 22:38:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 22:38:40 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-25 22:38:40 LOG4 got_cormsg: From DATATAKING: pnt tr 27.70 12.3440554064 -CF 2008-Apr-25 22:38:40 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-25 22:38:40 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-25 22:38:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 22:38:54 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-25 22:38:54 INFO3 alfa_motor: ALFA rotator in-position -3.90 degrees 2008-Apr-25 22:38:54 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-25 22:38:54 LOG5 end_task: Level: (4) ID = <10414> Status = 0 0 0 0 ok 2008-Apr-25 22:38:54 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-25 22:38:54 STOP finish_task: Finishing task 'rotate ALFA to -3.9 degrees' 2008-Apr-25 22:38:54 LOG5 finish_task: Level: (3) ID = <10413> Status = 0 0 0 0 ok 2008-Apr-25 22:38:54 INFO2 finish_task: DONE finished configuration: rotating ALFA to -3.9 degrees 2008-Apr-25 22:38:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 22:38:54 STOP end_task: Finishing task 'rotate ALFA to -3.9 degrees' with status 'OK' 2008-Apr-25 22:38:54 LOG5 end_task: Level: (3) ID = <10413> Status = 0 0 0 0 ok 2008-Apr-25 22:38:54 START begin_task: Starting task 'waiting on telescope' 2008-Apr-25 22:38:54 LOG5 begin_task: Level: (3) ID = <10415> Status = 0 0 0 0 ok 2008-Apr-25 22:38:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-25 22:38:54 LOG3 waittrk: Start waittrk 5 2008-Apr-25 22:38:54 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-25 22:38:54 LOG5 begin_task: Level: (4) ID = <10416> Status = 0 0 0 0 ok 2008-Apr-25 22:38:59 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-25 22:38:59 LOG5 end_task: Level: (4) ID = <10416> Status = 0 0 0 0 ok 2008-Apr-25 22:38:59 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-25 22:38:59 LOG5 begin_task: Level: (4) ID = <10417> Status = 0 0 0 0 ok 2008-Apr-25 22:40:02 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-25 22:40:02 LOG5 end_task: Level: (4) ID = <10417> Status = 0 0 0 0 ok 2008-Apr-25 22:40:02 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-25 22:40:02 INFO2 waittrk: Now tracking AGESVC1A_p2_065 2008-Apr-25 22:40:02 LOG4 waittrk: Current telescope position: Az = 387.42 ZA = 12.32 2008-Apr-25 22:40:02 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-25 22:40:02 LOG5 finish_task: Level: (3) ID = <10415> Status = 0 0 0 0 ok 2008-Apr-25 22:40:02 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-25 22:40:02 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 22:40:02 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-25 22:40:02 LOG5 end_task: Level: (3) ID = <10415> Status = 0 0 0 0 ok 2008-Apr-25 22:40:02 START begin_task: Starting task 'selecting calibration type' 2008-Apr-25 22:40:02 LOG5 begin_task: Level: (3) ID = <10418> Status = 0 0 0 0 ok 2008-Apr-25 22:40:02 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-25 22:40:02 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-25 22:40:02 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 22:40:02 START begin_task: Starting task 'waiting on setcal' 2008-Apr-25 22:40:02 LOG5 begin_task: Level: (4) ID = <10419> Status = 0 0 0 0 ok 2008-Apr-25 22:40:02 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-25 22:40:02 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 22:40:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 22:40:03 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-25 22:40:03 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-25 22:40:03 LOG5 end_task: Level: (4) ID = <10419> Status = 0 0 0 0 ok 2008-Apr-25 22:40:03 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-25 22:40:03 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 22:40:03 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-25 22:40:03 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 22:40:03 LOG5 begin_task: Level: (4) ID = <10420> Status = 0 0 0 0 ok 2008-Apr-25 22:40:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 22:40:03 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 22:40:03 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 22:40:03 LOG5 end_task: Level: (4) ID = <10420> Status = 0 0 0 0 ok 2008-Apr-25 22:40:03 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 22:40:03 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-25 22:40:03 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 22:40:03 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-25 22:40:03 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 22:40:03 LOG5 begin_task: Level: (4) ID = <10421> Status = 0 0 0 0 ok 2008-Apr-25 22:40:03 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 22:40:03 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 22:40:03 LOG5 end_task: Level: (4) ID = <10421> Status = 0 0 0 0 ok 2008-Apr-25 22:40:03 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 22:40:03 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-25 22:40:03 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-25 22:40:03 LOG5 finish_task: Level: (3) ID = <10418> Status = 0 0 0 0 ok 2008-Apr-25 22:40:03 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-25 22:40:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 22:40:03 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-25 22:40:03 LOG5 end_task: Level: (3) ID = <10418> Status = 0 0 0 0 ok 2008-Apr-25 22:40:03 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2008-Apr-25 22:40:03 INFO2 astwait: Waiting for 31 seconds from 02:40:03 to 02:40:34 UTC ... 2008-Apr-25 22:40:03 LOG4 send_obs_status: To obs_status: <1> TASKTIME 31 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-25 22:40:03 START begin_task: Starting task 'waiting on waiting for AST time' 2008-Apr-25 22:40:03 LOG5 begin_task: Level: (3) ID = <10422> Status = 0 0 0 0 ok 2008-Apr-25 22:40:34 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2008-Apr-25 22:40:34 LOG5 end_task: Level: (3) ID = <10422> Status = 0 0 0 0 ok 2008-Apr-25 22:40:34 INFO3 astwait: Finished waiting 2008-Apr-25 22:40:34 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-25 22:40:34 LOG5 dopset_later: Calling 'dopset_later 61.380461418800238' 2008-Apr-25 22:40:34 INFO3 dopset_later: Setting Doppler correction for 22:41:34 (61.4 seconds from now) 2008-Apr-25 22:40:34 LOG5 antvel: Calling 'antvel 27.700000 12.344055 F 61.380461418800238' 2008-Apr-25 22:40:34 LOG2 antvel: Parameters to Doppler: Heliocentric 96094 2008 116 0.0 2008-Apr-25 22:40:34 INFO5 antvel: Computed antenna velocity: +17.32825 km/s 2008-Apr-25 22:40:34 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=17.328247699399999 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-25 22:40:34 INFO4 dopset_gen: New sky frequencies: 1381.163596 1381.163596 1381.163596 1381.163596 1381.163596 1381.163596 1381.163596 1381.163596 1381.163596 2008-Apr-25 22:40:34 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.163596 sky0=1381.163596 sky1=1381.163596 sky2=1381.163596 sky3=1381.163596 sky4=1381.163596 sky5=1381.163596 sky6=1381.163596 sky7=1381.163596 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-25 22:40:34 LOG2 dopset_gen: Result from 'sky2syn': 1631.163596 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-25 22:40:34 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631163596.0} 2008-Apr-25 22:40:34 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 22:40:34 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-25 22:40:34 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-25 22:40:34 INFO5 fixed_driftmap: Tracking J2000 position: RA = 12:08:03.1 Dec = +07:23:51.2 2008-Apr-25 22:40:34 LOG3 track_source: Calling 'track_source AGESVC1A_p2_065 120803.1 072351.2 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-25 22:40:34 START begin_task: Starting task 'sending tracking commands' 2008-Apr-25 22:40:34 LOG5 begin_task: Level: (3) ID = <10423> Status = 0 0 0 0 ok 2008-Apr-25 22:40:34 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_065} INFO {Slewing to source 'AGESVC1A_p2_065' ...} 2008-Apr-25 22:40:34 INFO1 track_source: Starting to track AGESVC1A_p2_065 2008-Apr-25 22:40:34 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_065" 2008-Apr-25 22:40:34 LOG3 vw_send: To DATATAKING: set ra 120803.1 2008-Apr-25 22:40:34 LOG3 vw_send: To DATATAKING: set dec 072351.2 2008-Apr-25 22:40:34 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-25 22:40:34 LOG3 vw_send: To DATATAKING: pnt tr 120803.1 072351.2 -CJ 2008-Apr-25 22:40:34 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-25 22:40:34 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-25 22:40:34 LOG5 finish_task: Level: (3) ID = <10423> Status = 0 0 0 0 ok 2008-Apr-25 22:40:34 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-25 22:40:34 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 22:40:34 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-25 22:40:34 LOG5 end_task: Level: (3) ID = <10423> Status = 0 0 0 0 ok 2008-Apr-25 22:40:34 START begin_task: Starting task 'waiting on telescope' 2008-Apr-25 22:40:34 LOG5 begin_task: Level: (3) ID = <10424> Status = 0 0 0 0 ok 2008-Apr-25 22:40:34 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-25 22:40:34 LOG3 waittrk: Start waittrk 5 2008-Apr-25 22:40:34 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-25 22:40:34 LOG5 begin_task: Level: (4) ID = <10425> Status = 0 0 0 0 ok 2008-Apr-25 22:40:34 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631163596.0} 2008-Apr-25 22:40:34 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 22:40:34 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_065" 2008-Apr-25 22:40:34 LOG4 got_cormsg: From DATATAKING: set ra 120803.1 2008-Apr-25 22:40:34 LOG4 got_cormsg: From DATATAKING: set dec 072351.2 2008-Apr-25 22:40:34 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-25 22:40:34 LOG4 got_cormsg: From DATATAKING: vw% 120803.1 2008-Apr-25 22:40:34 LOG4 got_cormsg: From DATATAKING: vw% 072351.2 2008-Apr-25 22:40:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 22:40:34 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-25 22:40:34 LOG4 got_cormsg: From DATATAKING: pnt tr 120803.1 072351.2 -CJ 2008-Apr-25 22:40:34 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-25 22:40:34 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-25 22:40:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 22:40:39 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-25 22:40:39 LOG5 end_task: Level: (4) ID = <10425> Status = 0 0 0 0 ok 2008-Apr-25 22:40:39 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-25 22:40:39 LOG5 begin_task: Level: (4) ID = <10426> Status = 0 0 0 0 ok 2008-Apr-25 22:40:41 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-25 22:40:41 LOG5 end_task: Level: (4) ID = <10426> Status = 0 0 0 0 ok 2008-Apr-25 22:40:41 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-25 22:40:41 INFO2 waittrk: Now tracking AGESVC1A_p2_065 2008-Apr-25 22:40:41 LOG4 waittrk: Current telescope position: Az = 387.49 ZA = 12.33 2008-Apr-25 22:40:41 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-25 22:40:41 LOG5 finish_task: Level: (3) ID = <10424> Status = 0 0 0 0 ok 2008-Apr-25 22:40:41 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-25 22:40:41 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 22:40:41 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-25 22:40:41 LOG5 end_task: Level: (3) ID = <10424> Status = 0 0 0 0 ok 2008-Apr-25 22:40:41 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-25 22:40:41 LOG5 begin_task: Level: (3) ID = <10427> Status = 0 0 0 0 ok 2008-Apr-25 22:40:41 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-25 22:40:41 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-25 22:40:41 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-25 22:40:41 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-25 22:40:41 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 22:40:41 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-25 22:40:41 LOG5 begin_task: Level: (4) ID = <10428> Status = 0 0 0 0 ok 2008-Apr-25 22:40:42 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-25 22:40:42 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 22:40:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 22:40:43 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-25 22:40:43 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-25 22:40:43 LOG5 end_task: Level: (4) ID = <10428> Status = 0 0 0 0 ok 2008-Apr-25 22:40:43 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-25 22:40:43 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-25 22:40:43 LOG5 begin_task: Level: (4) ID = <10429> Status = 0 0 0 0 ok 2008-Apr-25 22:40:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-25 22:40:43 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-25 22:40:43 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-25 22:40:43 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-25 22:40:43 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-25 22:40:43 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-25 22:40:43 LOG5 begin_task: Level: (5) ID = <10430> Status = 0 0 0 0 ok 2008-Apr-25 22:40:43 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-25 22:40:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 22:40:43 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 1 dB --- beam 1: 8 6 dB 2008-Apr-25 22:40:43 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-25 22:40:43 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 6 dB 2008-Apr-25 22:40:43 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 3 3 dB 2008-Apr-25 22:40:44 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-25 22:40:44 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-25 22:40:44 LOG5 end_task: Level: (5) ID = <10430> Status = 0 0 0 0 ok 2008-Apr-25 22:40:44 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.877 0.965 ALFA beam 1: 0.885 1.072 2008-Apr-25 22:40:44 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.022 0.942 ALFA beam 3: 0.980 1.044 2008-Apr-25 22:40:44 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.934 0.955 ALFA beam 5: 1.040 0.889 2008-Apr-25 22:40:44 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.049 1.049 ALFA beam 7: 0.918 0.930 2008-Apr-25 22:40:44 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-25 22:40:44 LOG5 finish_task: Level: (4) ID = <10429> Status = 0 0 0 0 ok 2008-Apr-25 22:40:44 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-25 22:40:44 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 22:40:44 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-25 22:40:44 LOG5 end_task: Level: (4) ID = <10429> Status = 0 0 0 0 ok 2008-Apr-25 22:40:44 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-25 22:40:44 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-25 22:40:44 LOG5 finish_task: Level: (3) ID = <10427> Status = 0 0 0 0 ok 2008-Apr-25 22:40:44 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-25 22:40:44 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 22:40:44 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-25 22:40:44 LOG5 end_task: Level: (3) ID = <10427> Status = 0 0 0 0 ok 2008-Apr-25 22:40:44 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 EM, RM 2008-Apr-25 22:40:44 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 EM, RM 2008-Apr-25 22:40:44 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 EM, RM 2008-Apr-25 22:40:44 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 EM, RM 2008-Apr-25 22:40:44 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-25 22:40:44 START begin_task: Starting task 'WAPP calibration' 2008-Apr-25 22:40:44 LOG5 begin_task: Level: (3) ID = <10431> Status = 0 0 0 0 ok 2008-Apr-25 22:40:44 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-25 22:40:44 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-25 22:40:44 START begin_task: Starting task 'selecting calibration type' 2008-Apr-25 22:40:44 LOG5 begin_task: Level: (4) ID = <10432> Status = 0 0 0 0 ok 2008-Apr-25 22:40:44 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-25 22:40:44 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-25 22:40:44 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 22:40:44 START begin_task: Starting task 'waiting on setcal' 2008-Apr-25 22:40:44 LOG5 begin_task: Level: (5) ID = <10433> Status = 0 0 0 0 ok 2008-Apr-25 22:40:44 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 EM, RM' 2008-Apr-25 22:40:44 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-25 22:40:44 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 22:40:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 22:40:44 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-25 22:40:44 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-25 22:40:44 LOG5 end_task: Level: (5) ID = <10433> Status = 0 0 0 0 ok 2008-Apr-25 22:40:44 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-25 22:40:44 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 22:40:44 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-25 22:40:44 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 22:40:44 LOG5 begin_task: Level: (5) ID = <10434> Status = 0 0 0 0 ok 2008-Apr-25 22:40:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 22:40:44 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 22:40:44 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 22:40:44 LOG5 end_task: Level: (5) ID = <10434> Status = 0 0 0 0 ok 2008-Apr-25 22:40:44 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 22:40:44 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-25 22:40:44 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 22:40:44 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-25 22:40:44 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 22:40:44 LOG5 begin_task: Level: (5) ID = <10435> Status = 0 0 0 0 ok 2008-Apr-25 22:40:44 NOTE WAPPDATA-new_file: New FITS file: wapp.20080425.a2048.0010.fits 2008-Apr-25 22:40:45 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 22:40:45 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 22:40:45 LOG5 end_task: Level: (5) ID = <10435> Status = 0 0 0 0 ok 2008-Apr-25 22:40:45 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 22:40:45 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-25 22:40:45 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-25 22:40:45 LOG5 finish_task: Level: (4) ID = <10432> Status = 0 0 0 0 ok 2008-Apr-25 22:40:45 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-25 22:40:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 22:40:45 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-25 22:40:45 LOG5 end_task: Level: (4) ID = <10432> Status = 0 0 0 0 ok 2008-Apr-25 22:40:45 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-25 22:40:45 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-25 22:40:45 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-25 22:40:45 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-25 22:40:45 LOG5 begin_task: Level: (4) ID = <10436> Status = 0 0 0 0 ok 2008-Apr-25 22:40:45 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080425.a2048.0010.fits} 2008-Apr-25 22:40:45 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-25 22:40:45 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-25 22:40:45 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-25 22:40:45 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-25 22:40:45 LOG5 end_task: Level: (4) ID = <10436> Status = 0 0 0 0 ok 2008-Apr-25 22:40:45 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-25 22:40:45 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-25 22:40:45 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-25 22:40:45 LOG5 begin_task: Level: (4) ID = <10437> Status = 0 0 0 0 ok 2008-Apr-25 22:40:45 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-25 22:40:45 LOG5 log_alfabeam: Parameters: 12.134194444444445 7.397555555555555 12.526888 2008.3201778335488 -3.900098 2008-Apr-25 22:40:45 LOG4 log_alfabeam: ALFABEAM 0 12.134194444444452 7.397555555555558 2008-Apr-25 22:40:45 LOG4 log_alfabeam: ALFABEAM 1 12.133813230296573 7.499472980312526 2008-Apr-25 22:40:45 LOG4 log_alfabeam: ALFABEAM 2 12.128498581987804 7.432133906383878 2008-Apr-25 22:40:45 LOG4 log_alfabeam: ALFABEAM 3 12.128882353879101 7.330024198070129 2008-Apr-25 22:40:45 LOG4 log_alfabeam: ALFABEAM 4 12.134624934917266 7.295501877808075 2008-Apr-25 22:40:45 LOG4 log_alfabeam: ALFABEAM 5 12.139902985529442 7.363600601955255 2008-Apr-25 22:40:45 LOG4 log_alfabeam: ALFABEAM 6 12.139475125753542 7.465462338071670 2008-Apr-25 22:40:45 INFO2 take_spectra: Starting WAPP scan: 811600129 2008-Apr-25 22:40:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-25 22:40:45 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-25 22:40:45 LOG5 begin_task: Level: (5) ID = <10438> Status = 0 0 0 0 ok 2008-Apr-25 22:40:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 22:40:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9646.00 2008-Apr-25 22:40:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.163596 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 22:40:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.163596 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 22:40:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.163596 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 22:40:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.163596 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 22:40:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.163596 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 22:40:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.163596 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 22:40:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.163596 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 22:40:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.163596 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 22:40:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.163596 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 22:40:51 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 22:40:51 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-25 22:40:51 LOG5 end_task: Level: (5) ID = <10438> Status = 0 0 0 0 ok 2008-Apr-25 22:40:51 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-25 22:40:51 LOG5 end_task: Level: (4) ID = <10437> Status = 0 0 0 0 ok 2008-Apr-25 22:40:51 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-25 22:40:51 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-25 22:40:51 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-25 22:40:51 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-25 22:40:51 LOG5 begin_task: Level: (4) ID = <10439> Status = 0 0 0 0 ok 2008-Apr-25 22:40:51 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-25 22:40:51 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-25 22:40:51 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-25 22:40:51 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-25 22:40:51 LOG5 end_task: Level: (4) ID = <10439> Status = 0 0 0 0 ok 2008-Apr-25 22:40:51 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-25 22:40:51 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-25 22:40:51 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-25 22:40:51 LOG5 begin_task: Level: (4) ID = <10440> Status = 0 0 0 0 ok 2008-Apr-25 22:40:51 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-25 22:40:51 LOG5 log_alfabeam: Parameters: 12.134194444444445 7.397555555555555 12.528837 2008.3201780553654 -3.900098 2008-Apr-25 22:40:51 LOG4 log_alfabeam: ALFABEAM 0 12.134194444444447 7.397555555555552 2008-Apr-25 22:40:51 LOG4 log_alfabeam: ALFABEAM 1 12.133826901366771 7.499484186410651 2008-Apr-25 22:40:51 LOG4 log_alfabeam: ALFABEAM 2 12.128503231164833 7.432302831846191 2008-Apr-25 22:40:51 LOG4 log_alfabeam: ALFABEAM 3 12.128873309058651 7.330182051261320 2008-Apr-25 22:40:51 LOG4 log_alfabeam: ALFABEAM 4 12.134611198228068 7.295489355912533 2008-Apr-25 22:40:51 LOG4 log_alfabeam: ALFABEAM 5 12.139898403838515 7.363430606137716 2008-Apr-25 22:40:51 LOG4 log_alfabeam: ALFABEAM 6 12.139484257684400 7.465304995144263 2008-Apr-25 22:40:51 INFO2 take_spectra: Starting WAPP scan: 811600130 2008-Apr-25 22:40:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-25 22:40:52 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-25 22:40:52 LOG5 begin_task: Level: (5) ID = <10441> Status = 0 0 0 0 ok 2008-Apr-25 22:40:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 22:40:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.462 > 1.4)! 2008-Apr-25 22:40:52 LOG4 check_wapp_levels: WAPP-1 power levels: 1.237 1.256 1.199 1.447 2008-Apr-25 22:40:52 LOG4 check_wapp_levels: WAPP-2 power levels: 1.398 1.304 1.363 1.431 2008-Apr-25 22:40:52 LOG4 check_wapp_levels: WAPP-3 power levels: 1.306 1.335 1.438 1.194 2008-Apr-25 22:40:52 LOG4 check_wapp_levels: WAPP-4 power levels: 1.462 1.457 1.278 1.290 2008-Apr-25 22:40:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9653.00 2008-Apr-25 22:40:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.163596 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 22:40:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.163596 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 22:40:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.163596 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 22:40:58 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.888 and 1.069 2008-Apr-25 22:40:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.163596 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 22:40:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.163596 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 22:40:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.163596 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 22:40:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.163596 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 22:40:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.163596 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 22:40:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.163596 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 22:40:58 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-25 22:40:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 22:40:58 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-25 22:40:58 LOG5 end_task: Level: (5) ID = <10441> Status = 0 0 0 0 ok 2008-Apr-25 22:40:58 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-25 22:40:58 LOG5 end_task: Level: (4) ID = <10440> Status = 0 0 0 0 ok 2008-Apr-25 22:40:58 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-25 22:40:58 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-25 22:40:58 LOG5 finish_task: Level: (3) ID = <10431> Status = 0 0 0 0 ok 2008-Apr-25 22:40:58 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-25 22:40:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 22:40:58 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-25 22:40:58 LOG5 end_task: Level: (3) ID = <10431> Status = 0 0 0 0 ok 2008-Apr-25 22:40:59 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-25 22:40:59 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 27.70 and ZA = 12.34 2008-Apr-25 22:40:59 LOG3 track_source: Calling 'track_source AGESVC1A_p2_065 27.70 12.3440554064 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-25 22:40:59 START begin_task: Starting task 'sending tracking commands' 2008-Apr-25 22:40:59 LOG5 begin_task: Level: (3) ID = <10442> Status = 0 0 0 0 ok 2008-Apr-25 22:40:59 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_065} INFO {Slewing to source 'AGESVC1A_p2_065' ...} 2008-Apr-25 22:40:59 INFO1 track_source: Starting to track AGESVC1A_p2_065 2008-Apr-25 22:40:59 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_065" 2008-Apr-25 22:40:59 LOG3 vw_send: To DATATAKING: set ra 27.70 2008-Apr-25 22:40:59 LOG3 vw_send: To DATATAKING: set dec 12.3440554064 2008-Apr-25 22:40:59 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-25 22:40:59 LOG3 vw_send: To DATATAKING: pnt tr 27.70 12.3440554064 -CF 2008-Apr-25 22:40:59 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-25 22:40:59 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-25 22:40:59 LOG5 finish_task: Level: (3) ID = <10442> Status = 0 0 0 0 ok 2008-Apr-25 22:40:59 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-25 22:40:59 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 22:40:59 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-25 22:40:59 LOG5 end_task: Level: (3) ID = <10442> Status = 0 0 0 0 ok 2008-Apr-25 22:40:59 LOG1 fixed_driftmap: Parameters: HA = +00:23:00.1 Start = 12:32:27.3 LST = 12:31:50.8 diff = 36.5 secs 2008-Apr-25 22:40:59 INFO2 fixed_driftmap: Waiting 34.5 seconds for RA 12:09:27 2008-Apr-25 22:40:59 INFO2 lstwait: Waiting for 34.4 secs from LST 12:31:51 to LST 12:32:25 ... 2008-Apr-25 22:40:59 LOG4 send_obs_status: To obs_status: <1> TASKTIME 34.387564609517348 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-25 22:40:59 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-25 22:40:59 LOG5 begin_task: Level: (3) ID = <10443> Status = 0 0 0 0 ok 2008-Apr-25 22:40:59 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_065" 2008-Apr-25 22:40:59 LOG4 got_cormsg: From DATATAKING: set ra 27.70 2008-Apr-25 22:40:59 LOG4 got_cormsg: From DATATAKING: set dec 12.3440554064 2008-Apr-25 22:40:59 LOG4 got_cormsg: From DATATAKING: vw% 27.70 2008-Apr-25 22:40:59 LOG4 got_cormsg: From DATATAKING: vw% 12.3440554064 2008-Apr-25 22:40:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 22:40:59 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-25 22:40:59 LOG4 got_cormsg: From DATATAKING: pnt tr 27.70 12.3440554064 -CF 2008-Apr-25 22:40:59 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-25 22:40:59 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-25 22:40:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 22:41:33 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-25 22:41:33 LOG5 end_task: Level: (3) ID = <10443> Status = 0 0 0 0 ok 2008-Apr-25 22:41:33 LOG4 lstwait: Finished waiting, the gui caused difference: 0.61468651999447843 2008-Apr-25 22:41:33 INFO3 lstwait: Finished waiting 2008-Apr-25 22:41:33 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-25 22:41:33 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-25 22:41:33 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-25 22:41:33 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-25 22:41:33 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-25 22:41:33 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-25 22:41:33 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-25 22:41:33 LOG5 begin_task: Level: (3) ID = <10444> Status = 0 0 0 0 ok 2008-Apr-25 22:41:33 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-25 22:41:33 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-25 22:41:33 INFO2 take_spectra: Starting WAPP scan: 811600131 2008-Apr-25 22:41:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-25 22:41:34 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-25 22:41:34 LOG5 begin_task: Level: (4) ID = <10445> Status = 0 0 0 0 ok 2008-Apr-25 22:41:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 22:41:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9695.00 2008-Apr-25 22:41:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.163596 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 22:41:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.163596 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 22:41:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.163596 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 22:41:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.163596 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 22:41:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.163596 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 22:41:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.163596 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 22:41:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.163596 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 22:41:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.163596 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 22:41:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.163596 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 23:01:35 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 23:01:35 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-25 23:01:35 LOG5 end_task: Level: (4) ID = <10445> Status = 0 0 0 0 ok 2008-Apr-25 23:01:35 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-25 23:01:35 LOG5 end_task: Level: (3) ID = <10444> Status = 0 0 0 0 ok 2008-Apr-25 23:01:35 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-25 23:01:35 LOG5 finish_task: Level: (2) ID = <10411> Status = 0 0 0 0 ok 2008-Apr-25 23:01:35 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-25 23:01:35 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-25 23:01:35 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-25 23:01:35 LOG5 end_task: Level: (2) ID = <10411> Status = 0 0 0 0 ok 2008-Apr-25 23:01:35 COMMAND run_command_line: EXECUTING command 47: 'FIXEDDRIFT az=46.84 alfaangle=-20.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_067 ra=120900.00 dec=72100.00' 2008-Apr-25 23:01:35 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-25 23:01:36 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-25 23:01:36 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 46.84 -20.8 hcorcal 5 tracking no first 1 AGESVC1A_p2_067 120900.00 72100.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-25 23:01:36 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-25 23:01:36 LOG5 begin_task: Level: (2) ID = <10446> Status = 0 0 0 0 ok 2008-Apr-25 23:01:36 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGESVC1A_p2_065' 2008-Apr-25 23:01:36 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-25 23:01:36 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1A_p2_067} 2008-Apr-25 23:01:36 INFO3 fixed_driftmap: Sending telescope to Az = 46.84 and ZA = 15.73 2008-Apr-25 23:01:36 LOG3 track_source: Calling 'track_source AGESVC1A_p2_067 46.84 15.7294197789 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-25 23:01:36 START begin_task: Starting task 'sending tracking commands' 2008-Apr-25 23:01:36 LOG5 begin_task: Level: (3) ID = <10447> Status = 0 0 0 0 ok 2008-Apr-25 23:01:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_067} INFO {Slewing to source 'AGESVC1A_p2_067' ...} 2008-Apr-25 23:01:36 INFO1 track_source: Starting to track AGESVC1A_p2_067 2008-Apr-25 23:01:36 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_067" 2008-Apr-25 23:01:36 LOG3 vw_send: To DATATAKING: set ra 46.84 2008-Apr-25 23:01:36 LOG3 vw_send: To DATATAKING: set dec 15.7294197789 2008-Apr-25 23:01:36 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-25 23:01:36 LOG3 vw_send: To DATATAKING: pnt tr 46.84 15.7294197789 -CF 2008-Apr-25 23:01:36 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-25 23:01:36 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-25 23:01:36 LOG5 finish_task: Level: (3) ID = <10447> Status = 0 0 0 0 ok 2008-Apr-25 23:01:36 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-25 23:01:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 23:01:36 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-25 23:01:36 LOG5 end_task: Level: (3) ID = <10447> Status = 0 0 0 0 ok 2008-Apr-25 23:01:36 START begin_task: Starting task 'rotate ALFA to -20.8 degrees' 2008-Apr-25 23:01:36 LOG5 begin_task: Level: (3) ID = <10448> Status = 0 0 0 0 ok 2008-Apr-25 23:01:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -20.8 degrees ...} 2008-Apr-25 23:01:36 INFO2 rotate_alfa: ALFA commanded to -20.8 degrees 2008-Apr-25 23:01:36 LOG3 sock_errsend: To ALFAMOTOR: POSITION -20.8 REPLY 2008-Apr-25 23:01:36 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-25 23:01:36 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-25 23:01:36 LOG5 begin_task: Level: (4) ID = <10449> Status = 0 0 0 0 ok 2008-Apr-25 23:01:36 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_067" 2008-Apr-25 23:01:36 LOG4 got_cormsg: From DATATAKING: set ra 46.84 2008-Apr-25 23:01:36 LOG4 got_cormsg: From DATATAKING: set dec 15.7294197789 2008-Apr-25 23:01:36 LOG4 got_cormsg: From DATATAKING: vw% 46.84 2008-Apr-25 23:01:36 LOG4 got_cormsg: From DATATAKING: vw% 15.7294197789 2008-Apr-25 23:01:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 23:01:36 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-25 23:01:36 LOG4 got_cormsg: From DATATAKING: pnt tr 46.84 15.7294197789 -CF 2008-Apr-25 23:01:36 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-25 23:01:36 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-25 23:01:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 23:01:47 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-25 23:01:47 INFO3 alfa_motor: ALFA rotator in-position -20.80 degrees 2008-Apr-25 23:01:47 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-25 23:01:47 LOG5 end_task: Level: (4) ID = <10449> Status = 0 0 0 0 ok 2008-Apr-25 23:01:47 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-25 23:01:47 STOP finish_task: Finishing task 'rotate ALFA to -20.8 degrees' 2008-Apr-25 23:01:47 LOG5 finish_task: Level: (3) ID = <10448> Status = 0 0 0 0 ok 2008-Apr-25 23:01:47 INFO2 finish_task: DONE finished configuration: rotating ALFA to -20.8 degrees 2008-Apr-25 23:01:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 23:01:47 STOP end_task: Finishing task 'rotate ALFA to -20.8 degrees' with status 'OK' 2008-Apr-25 23:01:47 LOG5 end_task: Level: (3) ID = <10448> Status = 0 0 0 0 ok 2008-Apr-25 23:01:47 START begin_task: Starting task 'waiting on telescope' 2008-Apr-25 23:01:47 LOG5 begin_task: Level: (3) ID = <10450> Status = 0 0 0 0 ok 2008-Apr-25 23:01:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-25 23:01:47 LOG3 waittrk: Start waittrk 5 2008-Apr-25 23:01:47 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-25 23:01:47 LOG5 begin_task: Level: (4) ID = <10451> Status = 0 0 0 0 ok 2008-Apr-25 23:01:52 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-25 23:01:52 LOG5 end_task: Level: (4) ID = <10451> Status = 0 0 0 0 ok 2008-Apr-25 23:01:52 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-25 23:01:52 LOG5 begin_task: Level: (4) ID = <10452> Status = 0 0 0 0 ok 2008-Apr-25 23:03:07 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-25 23:03:07 LOG5 end_task: Level: (4) ID = <10452> Status = 0 0 0 0 ok 2008-Apr-25 23:03:07 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-25 23:03:07 INFO2 waittrk: Now tracking AGESVC1A_p2_067 2008-Apr-25 23:03:07 LOG4 waittrk: Current telescope position: Az = 406.62 ZA = 15.72 2008-Apr-25 23:03:07 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-25 23:03:07 LOG5 finish_task: Level: (3) ID = <10450> Status = 0 0 0 0 ok 2008-Apr-25 23:03:07 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-25 23:03:07 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 23:03:07 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-25 23:03:07 LOG5 end_task: Level: (3) ID = <10450> Status = 0 0 0 0 ok 2008-Apr-25 23:03:07 START begin_task: Starting task 'selecting calibration type' 2008-Apr-25 23:03:07 LOG5 begin_task: Level: (3) ID = <10453> Status = 0 0 0 0 ok 2008-Apr-25 23:03:07 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-25 23:03:07 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-25 23:03:07 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 23:03:07 START begin_task: Starting task 'waiting on setcal' 2008-Apr-25 23:03:07 LOG5 begin_task: Level: (4) ID = <10454> Status = 0 0 0 0 ok 2008-Apr-25 23:03:07 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-25 23:03:07 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 23:03:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 23:03:08 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-25 23:03:08 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-25 23:03:08 LOG5 end_task: Level: (4) ID = <10454> Status = 0 0 0 0 ok 2008-Apr-25 23:03:08 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-25 23:03:08 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 23:03:08 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-25 23:03:08 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 23:03:08 LOG5 begin_task: Level: (4) ID = <10455> Status = 0 0 0 0 ok 2008-Apr-25 23:03:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 23:03:09 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 23:03:09 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 23:03:09 LOG5 end_task: Level: (4) ID = <10455> Status = 0 0 0 0 ok 2008-Apr-25 23:03:09 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 23:03:09 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-25 23:03:09 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 23:03:09 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-25 23:03:09 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 23:03:09 LOG5 begin_task: Level: (4) ID = <10456> Status = 0 0 0 0 ok 2008-Apr-25 23:03:09 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 23:03:09 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 23:03:09 LOG5 end_task: Level: (4) ID = <10456> Status = 0 0 0 0 ok 2008-Apr-25 23:03:09 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 23:03:09 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-25 23:03:09 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-25 23:03:09 LOG5 finish_task: Level: (3) ID = <10453> Status = 0 0 0 0 ok 2008-Apr-25 23:03:09 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-25 23:03:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 23:03:09 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-25 23:03:09 LOG5 end_task: Level: (3) ID = <10453> Status = 0 0 0 0 ok 2008-Apr-25 23:03:09 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2008-Apr-25 23:03:09 INFO2 astwait: Waiting for 21 seconds from 03:03:09 to 03:03:30 UTC ... 2008-Apr-25 23:03:09 LOG4 send_obs_status: To obs_status: <1> TASKTIME 21 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-25 23:03:09 START begin_task: Starting task 'waiting on waiting for AST time' 2008-Apr-25 23:03:09 LOG5 begin_task: Level: (3) ID = <10457> Status = 0 0 0 0 ok 2008-Apr-25 23:03:30 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2008-Apr-25 23:03:30 LOG5 end_task: Level: (3) ID = <10457> Status = 0 0 0 0 ok 2008-Apr-25 23:03:30 INFO3 astwait: Finished waiting 2008-Apr-25 23:03:30 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-25 23:03:30 LOG5 dopset_later: Calling 'dopset_later 61.441395588627017' 2008-Apr-25 23:03:30 INFO3 dopset_later: Setting Doppler correction for 23:04:30 (61.4 seconds from now) 2008-Apr-25 23:03:30 LOG5 antvel: Calling 'antvel 46.840000 15.729420 F 61.441395588627017' 2008-Apr-25 23:03:30 LOG2 antvel: Parameters to Doppler: Heliocentric 97470 2008 116 0.0 2008-Apr-25 23:03:30 INFO5 antvel: Computed antenna velocity: +17.37157 km/s 2008-Apr-25 23:03:30 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=17.3715666445 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-25 23:03:30 INFO4 dopset_gen: New sky frequencies: 1381.163397 1381.163397 1381.163397 1381.163397 1381.163397 1381.163397 1381.163397 1381.163397 1381.163397 2008-Apr-25 23:03:30 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.163397 sky0=1381.163397 sky1=1381.163397 sky2=1381.163397 sky3=1381.163397 sky4=1381.163397 sky5=1381.163397 sky6=1381.163397 sky7=1381.163397 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-25 23:03:30 LOG2 dopset_gen: Result from 'sky2syn': 1631.163397 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-25 23:03:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631163397.0} 2008-Apr-25 23:03:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 23:03:30 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-25 23:03:30 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-25 23:03:30 INFO5 fixed_driftmap: Tracking J2000 position: RA = 12:08:03.0 Dec = +07:20:51.2 2008-Apr-25 23:03:30 LOG3 track_source: Calling 'track_source AGESVC1A_p2_067 120803.0 072051.2 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-25 23:03:30 START begin_task: Starting task 'sending tracking commands' 2008-Apr-25 23:03:30 LOG5 begin_task: Level: (3) ID = <10458> Status = 0 0 0 0 ok 2008-Apr-25 23:03:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_067} INFO {Slewing to source 'AGESVC1A_p2_067' ...} 2008-Apr-25 23:03:30 INFO1 track_source: Starting to track AGESVC1A_p2_067 2008-Apr-25 23:03:30 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_067" 2008-Apr-25 23:03:30 LOG3 vw_send: To DATATAKING: set ra 120803.0 2008-Apr-25 23:03:30 LOG3 vw_send: To DATATAKING: set dec 072051.2 2008-Apr-25 23:03:30 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-25 23:03:30 LOG3 vw_send: To DATATAKING: pnt tr 120803.0 072051.2 -CJ 2008-Apr-25 23:03:30 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-25 23:03:30 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-25 23:03:30 LOG5 finish_task: Level: (3) ID = <10458> Status = 0 0 0 0 ok 2008-Apr-25 23:03:30 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-25 23:03:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 23:03:30 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-25 23:03:30 LOG5 end_task: Level: (3) ID = <10458> Status = 0 0 0 0 ok 2008-Apr-25 23:03:30 START begin_task: Starting task 'waiting on telescope' 2008-Apr-25 23:03:30 LOG5 begin_task: Level: (3) ID = <10459> Status = 0 0 0 0 ok 2008-Apr-25 23:03:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-25 23:03:30 LOG3 waittrk: Start waittrk 5 2008-Apr-25 23:03:30 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-25 23:03:30 LOG5 begin_task: Level: (4) ID = <10460> Status = 0 0 0 0 ok 2008-Apr-25 23:03:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631163397.0} 2008-Apr-25 23:03:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 23:03:30 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_067" 2008-Apr-25 23:03:30 LOG4 got_cormsg: From DATATAKING: set ra 120803.0 2008-Apr-25 23:03:30 LOG4 got_cormsg: From DATATAKING: set dec 072051.2 2008-Apr-25 23:03:30 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-25 23:03:30 LOG4 got_cormsg: From DATATAKING: vw% 120803.0 2008-Apr-25 23:03:30 LOG4 got_cormsg: From DATATAKING: vw% 072051.2 2008-Apr-25 23:03:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 23:03:30 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-25 23:03:30 LOG4 got_cormsg: From DATATAKING: pnt tr 120803.0 072051.2 -CJ 2008-Apr-25 23:03:30 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-25 23:03:30 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-25 23:03:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 23:03:35 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-25 23:03:35 LOG5 end_task: Level: (4) ID = <10460> Status = 0 0 0 0 ok 2008-Apr-25 23:03:35 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-25 23:03:35 LOG5 begin_task: Level: (4) ID = <10461> Status = 0 0 0 0 ok 2008-Apr-25 23:03:37 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-25 23:03:37 LOG5 end_task: Level: (4) ID = <10461> Status = 0 0 0 0 ok 2008-Apr-25 23:03:37 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-25 23:03:37 INFO2 waittrk: Now tracking AGESVC1A_p2_067 2008-Apr-25 23:03:37 LOG4 waittrk: Current telescope position: Az = 406.65 ZA = 15.73 2008-Apr-25 23:03:37 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-25 23:03:37 LOG5 finish_task: Level: (3) ID = <10459> Status = 0 0 0 0 ok 2008-Apr-25 23:03:37 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-25 23:03:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 23:03:37 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-25 23:03:37 LOG5 end_task: Level: (3) ID = <10459> Status = 0 0 0 0 ok 2008-Apr-25 23:03:37 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-25 23:03:37 LOG5 begin_task: Level: (3) ID = <10462> Status = 0 0 0 0 ok 2008-Apr-25 23:03:37 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-25 23:03:37 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-25 23:03:37 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-25 23:03:37 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-25 23:03:37 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 23:03:37 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-25 23:03:37 LOG5 begin_task: Level: (4) ID = <10463> Status = 0 0 0 0 ok 2008-Apr-25 23:03:37 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-25 23:03:37 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 23:03:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 23:03:39 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-25 23:03:39 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-25 23:03:39 LOG5 end_task: Level: (4) ID = <10463> Status = 0 0 0 0 ok 2008-Apr-25 23:03:39 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-25 23:03:39 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-25 23:03:39 LOG5 begin_task: Level: (4) ID = <10464> Status = 0 0 0 0 ok 2008-Apr-25 23:03:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-25 23:03:39 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-25 23:03:39 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-25 23:03:39 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-25 23:03:39 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-25 23:03:39 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-25 23:03:39 LOG5 begin_task: Level: (5) ID = <10465> Status = 0 0 0 0 ok 2008-Apr-25 23:03:39 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-25 23:03:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 23:03:39 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 1 dB --- beam 1: 8 6 dB 2008-Apr-25 23:03:39 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-25 23:03:39 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 6 dB 2008-Apr-25 23:03:39 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 3 3 dB 2008-Apr-25 23:03:39 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-25 23:03:40 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-25 23:03:40 LOG5 end_task: Level: (5) ID = <10465> Status = 0 0 0 0 ok 2008-Apr-25 23:03:40 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.926 0.963 ALFA beam 1: 0.901 1.068 2008-Apr-25 23:03:40 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.058 0.977 ALFA beam 3: 1.050 1.097 2008-Apr-25 23:03:40 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.972 0.997 ALFA beam 5: 1.077 0.920 2008-Apr-25 23:03:40 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.088 1.079 ALFA beam 7: 0.952 0.953 2008-Apr-25 23:03:40 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-25 23:03:40 LOG5 finish_task: Level: (4) ID = <10464> Status = 0 0 0 0 ok 2008-Apr-25 23:03:40 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-25 23:03:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 23:03:40 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-25 23:03:40 LOG5 end_task: Level: (4) ID = <10464> Status = 0 0 0 0 ok 2008-Apr-25 23:03:40 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-25 23:03:40 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-25 23:03:40 LOG5 finish_task: Level: (3) ID = <10462> Status = 0 0 0 0 ok 2008-Apr-25 23:03:40 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-25 23:03:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 23:03:40 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-25 23:03:40 LOG5 end_task: Level: (3) ID = <10462> Status = 0 0 0 0 ok 2008-Apr-25 23:03:40 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 EM, RM 2008-Apr-25 23:03:40 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 EM, RM 2008-Apr-25 23:03:40 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 EM, RM 2008-Apr-25 23:03:40 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 EM, RM 2008-Apr-25 23:03:40 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-25 23:03:40 START begin_task: Starting task 'WAPP calibration' 2008-Apr-25 23:03:40 LOG5 begin_task: Level: (3) ID = <10466> Status = 0 0 0 0 ok 2008-Apr-25 23:03:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-25 23:03:40 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-25 23:03:40 START begin_task: Starting task 'selecting calibration type' 2008-Apr-25 23:03:40 LOG5 begin_task: Level: (4) ID = <10467> Status = 0 0 0 0 ok 2008-Apr-25 23:03:40 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-25 23:03:40 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-25 23:03:40 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 23:03:40 START begin_task: Starting task 'waiting on setcal' 2008-Apr-25 23:03:40 LOG5 begin_task: Level: (5) ID = <10468> Status = 0 0 0 0 ok 2008-Apr-25 23:03:40 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 EM, RM' 2008-Apr-25 23:03:40 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-25 23:03:40 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 23:03:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 23:03:40 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-25 23:03:40 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-25 23:03:40 LOG5 end_task: Level: (5) ID = <10468> Status = 0 0 0 0 ok 2008-Apr-25 23:03:40 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-25 23:03:40 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 23:03:40 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-25 23:03:40 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 23:03:40 LOG5 begin_task: Level: (5) ID = <10469> Status = 0 0 0 0 ok 2008-Apr-25 23:03:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 23:03:40 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 23:03:40 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 23:03:40 LOG5 end_task: Level: (5) ID = <10469> Status = 0 0 0 0 ok 2008-Apr-25 23:03:40 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 23:03:40 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-25 23:03:40 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 23:03:40 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-25 23:03:40 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 23:03:40 LOG5 begin_task: Level: (5) ID = <10470> Status = 0 0 0 0 ok 2008-Apr-25 23:03:40 NOTE WAPPDATA-new_file: New FITS file: wapp.20080425.a2048.0011.fits 2008-Apr-25 23:03:40 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 23:03:40 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 23:03:40 LOG5 end_task: Level: (5) ID = <10470> Status = 0 0 0 0 ok 2008-Apr-25 23:03:40 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 23:03:40 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-25 23:03:40 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-25 23:03:40 LOG5 finish_task: Level: (4) ID = <10467> Status = 0 0 0 0 ok 2008-Apr-25 23:03:40 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-25 23:03:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 23:03:41 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-25 23:03:41 LOG5 end_task: Level: (4) ID = <10467> Status = 0 0 0 0 ok 2008-Apr-25 23:03:41 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-25 23:03:41 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-25 23:03:41 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-25 23:03:41 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-25 23:03:41 LOG5 begin_task: Level: (4) ID = <10471> Status = 0 0 0 0 ok 2008-Apr-25 23:03:41 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080425.a2048.0011.fits} 2008-Apr-25 23:03:41 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-25 23:03:41 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-25 23:03:41 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-25 23:03:41 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-25 23:03:41 LOG5 end_task: Level: (4) ID = <10471> Status = 0 0 0 0 ok 2008-Apr-25 23:03:41 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-25 23:03:41 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-25 23:03:41 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-25 23:03:41 LOG5 begin_task: Level: (4) ID = <10472> Status = 0 0 0 0 ok 2008-Apr-25 23:03:41 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-25 23:03:41 LOG5 log_alfabeam: Parameters: 12.134166666666665 7.3475555555555543 12.910156 2008.3202214363575 -20.800095 2008-Apr-25 23:03:41 LOG4 log_alfabeam: ALFABEAM 0 12.134166666666665 7.347555555555553 2008-Apr-25 23:03:41 LOG4 log_alfabeam: ALFABEAM 1 12.133950994080765 7.445184180170950 2008-Apr-25 23:03:41 LOG4 log_alfabeam: ALFABEAM 2 12.128280116941539 7.380491753782335 2008-Apr-25 23:03:41 LOG4 log_alfabeam: ALFABEAM 3 12.128513188524785 7.282537345972933 2008-Apr-25 23:03:41 LOG4 log_alfabeam: ALFABEAM 4 12.134425227836440 7.249735819610874 2008-Apr-25 23:03:41 LOG4 log_alfabeam: ALFABEAM 5 12.140054325989960 7.315205126803920 2008-Apr-25 23:03:41 LOG4 log_alfabeam: ALFABEAM 6 12.139813267720328 7.412700421908029 2008-Apr-25 23:03:41 INFO2 take_spectra: Starting WAPP scan: 811600132 2008-Apr-25 23:03:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-25 23:03:41 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-25 23:03:41 LOG5 begin_task: Level: (5) ID = <10473> Status = 0 0 0 0 ok 2008-Apr-25 23:03:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 23:03:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11022.00 2008-Apr-25 23:03:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.163397 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 23:03:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.163397 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 23:03:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.163397 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 23:03:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.163397 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 23:03:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.163397 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 23:03:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.163397 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 23:03:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.163397 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 23:03:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.163397 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 23:03:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.163397 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 23:03:47 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 23:03:47 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-25 23:03:47 LOG5 end_task: Level: (5) ID = <10473> Status = 0 0 0 0 ok 2008-Apr-25 23:03:47 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-25 23:03:47 LOG5 end_task: Level: (4) ID = <10472> Status = 0 0 0 0 ok 2008-Apr-25 23:03:47 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-25 23:03:47 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-25 23:03:47 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-25 23:03:47 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-25 23:03:47 LOG5 begin_task: Level: (4) ID = <10474> Status = 0 0 0 0 ok 2008-Apr-25 23:03:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.478 > 1.4)! 2008-Apr-25 23:03:47 LOG4 check_wapp_levels: WAPP-1 power levels: 0.926 0.963 0.901 1.068 2008-Apr-25 23:03:47 LOG4 check_wapp_levels: WAPP-2 power levels: 1.058 0.977 1.050 1.097 2008-Apr-25 23:03:47 LOG4 check_wapp_levels: WAPP-3 power levels: 1.339 1.378 1.478 1.227 2008-Apr-25 23:03:47 LOG4 check_wapp_levels: WAPP-4 power levels: 1.088 1.079 0.952 0.953 2008-Apr-25 23:03:47 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-25 23:03:47 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-25 23:03:47 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-25 23:03:47 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-25 23:03:47 LOG5 end_task: Level: (4) ID = <10474> Status = 0 0 0 0 ok 2008-Apr-25 23:03:47 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-25 23:03:47 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-25 23:03:47 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-25 23:03:47 LOG5 begin_task: Level: (4) ID = <10475> Status = 0 0 0 0 ok 2008-Apr-25 23:03:47 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-25 23:03:47 LOG5 log_alfabeam: Parameters: 12.134166666666665 7.3475555555555543 12.912106 2008.3202216581742 -20.800095 2008-Apr-25 23:03:47 LOG4 log_alfabeam: ALFABEAM 0 12.134166666666667 7.347555555555550 2008-Apr-25 23:03:47 LOG4 log_alfabeam: ALFABEAM 1 12.133958954909993 7.445188144852588 2008-Apr-25 23:03:47 LOG4 log_alfabeam: ALFABEAM 2 12.128282814142356 7.380597916647200 2008-Apr-25 23:03:47 LOG4 log_alfabeam: ALFABEAM 3 12.128507878829017 7.282639672630079 2008-Apr-25 23:03:47 LOG4 log_alfabeam: ALFABEAM 4 12.134417196672128 7.249731338134481 2008-Apr-25 23:03:47 LOG4 log_alfabeam: ALFABEAM 5 12.140051672957670 7.315098127099083 2008-Apr-25 23:03:47 LOG4 log_alfabeam: ALFABEAM 6 12.139818599574440 7.412598026486412 2008-Apr-25 23:03:47 INFO2 take_spectra: Starting WAPP scan: 811600133 2008-Apr-25 23:03:48 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-25 23:03:48 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-25 23:03:48 LOG5 begin_task: Level: (5) ID = <10476> Status = 0 0 0 0 ok 2008-Apr-25 23:03:48 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 23:03:48 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11029.00 2008-Apr-25 23:03:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.163397 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 23:03:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.163397 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 23:03:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.163397 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 23:03:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.163397 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 23:03:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.163397 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 23:03:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.163397 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 23:03:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.163397 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 23:03:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.163397 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 23:03:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.163397 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 23:03:54 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-25 23:03:54 INFO5 check_wapp_levels: WAPP power levels are between 0.901 and 1.496 (still bad) 2008-Apr-25 23:03:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 23:03:54 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-25 23:03:54 LOG5 end_task: Level: (5) ID = <10476> Status = 0 0 0 0 ok 2008-Apr-25 23:03:54 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-25 23:03:54 LOG5 end_task: Level: (4) ID = <10475> Status = 0 0 0 0 ok 2008-Apr-25 23:03:54 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-25 23:03:54 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-25 23:03:54 LOG5 finish_task: Level: (3) ID = <10466> Status = 0 0 0 0 ok 2008-Apr-25 23:03:54 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-25 23:03:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 23:03:54 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-25 23:03:54 LOG5 end_task: Level: (3) ID = <10466> Status = 0 0 0 0 ok 2008-Apr-25 23:03:55 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-25 23:03:55 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 46.84 and ZA = 15.73 2008-Apr-25 23:03:55 LOG3 track_source: Calling 'track_source AGESVC1A_p2_067 46.84 15.7294197789 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-25 23:03:55 START begin_task: Starting task 'sending tracking commands' 2008-Apr-25 23:03:55 LOG5 begin_task: Level: (3) ID = <10477> Status = 0 0 0 0 ok 2008-Apr-25 23:03:55 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_067} INFO {Slewing to source 'AGESVC1A_p2_067' ...} 2008-Apr-25 23:03:55 INFO1 track_source: Starting to track AGESVC1A_p2_067 2008-Apr-25 23:03:55 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_067" 2008-Apr-25 23:03:55 LOG3 vw_send: To DATATAKING: set ra 46.84 2008-Apr-25 23:03:55 LOG3 vw_send: To DATATAKING: set dec 15.7294197789 2008-Apr-25 23:03:55 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-25 23:03:55 LOG3 vw_send: To DATATAKING: pnt tr 46.84 15.7294197789 -CF 2008-Apr-25 23:03:55 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-25 23:03:55 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-25 23:03:55 LOG5 finish_task: Level: (3) ID = <10477> Status = 0 0 0 0 ok 2008-Apr-25 23:03:55 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-25 23:03:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 23:03:55 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-25 23:03:55 LOG5 end_task: Level: (3) ID = <10477> Status = 0 0 0 0 ok 2008-Apr-25 23:03:55 LOG1 fixed_driftmap: Parameters: HA = +00:46:00.0 Start = 12:55:27.1 LST = 12:54:50.6 diff = 36.5 secs 2008-Apr-25 23:03:55 INFO2 fixed_driftmap: Waiting 34.5 seconds for RA 12:09:27 2008-Apr-25 23:03:55 INFO2 lstwait: Waiting for 34.4 secs from LST 12:54:51 to LST 12:55:25 ... 2008-Apr-25 23:03:55 LOG4 send_obs_status: To obs_status: <1> TASKTIME 34.444908608786811 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-25 23:03:55 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-25 23:03:55 LOG5 begin_task: Level: (3) ID = <10478> Status = 0 0 0 0 ok 2008-Apr-25 23:03:55 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_067" 2008-Apr-25 23:03:55 LOG4 got_cormsg: From DATATAKING: set ra 46.84 2008-Apr-25 23:03:55 LOG4 got_cormsg: From DATATAKING: set dec 15.7294197789 2008-Apr-25 23:03:55 LOG4 got_cormsg: From DATATAKING: vw% 46.84 2008-Apr-25 23:03:55 LOG4 got_cormsg: From DATATAKING: vw% 15.7294197789 2008-Apr-25 23:03:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 23:03:55 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-25 23:03:55 LOG4 got_cormsg: From DATATAKING: pnt tr 46.84 15.7294197789 -CF 2008-Apr-25 23:03:55 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-25 23:03:55 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-25 23:03:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 23:04:00 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.901 and 1.099 2008-Apr-25 23:04:29 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-25 23:04:29 LOG5 end_task: Level: (3) ID = <10478> Status = 0 0 0 0 ok 2008-Apr-25 23:04:29 LOG4 lstwait: Finished waiting, the gui caused difference: 0.55718551999461852 2008-Apr-25 23:04:29 INFO3 lstwait: Finished waiting 2008-Apr-25 23:04:29 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-25 23:04:29 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-25 23:04:29 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-25 23:04:29 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-25 23:04:29 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-25 23:04:30 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-25 23:04:30 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-25 23:04:30 LOG5 begin_task: Level: (3) ID = <10479> Status = 0 0 0 0 ok 2008-Apr-25 23:04:30 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-25 23:04:30 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-25 23:04:30 INFO2 take_spectra: Starting WAPP scan: 811600134 2008-Apr-25 23:04:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-25 23:04:30 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-25 23:04:30 LOG5 begin_task: Level: (4) ID = <10480> Status = 0 0 0 0 ok 2008-Apr-25 23:04:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 23:04:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11071.00 2008-Apr-25 23:04:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.163397 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 23:04:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.163397 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 23:04:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.163397 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 23:04:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.163397 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 23:04:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.163397 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 23:04:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.163397 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 23:04:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.163397 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 23:04:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.163397 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 23:04:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.163397 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 23:06:44 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 23:06:44.298 (seconds: 83204.298)!} 2008-Apr-25 23:06:44 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 23:06:44.298 (seconds: 83204.298)! 2008-Apr-25 23:06:45 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 83203.0 to 83204.0! 2008-Apr-25 23:06:46 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (83203.0 - 83205.0)! 2008-Apr-25 23:21:43 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 23:21:43.298 (seconds: 84103.298)!} 2008-Apr-25 23:21:43 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 23:21:43.298 (seconds: 84103.298)! 2008-Apr-25 23:21:44 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 84102.0 to 84103.0! 2008-Apr-25 23:21:45 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (84102.0 - 84104.0)! 2008-Apr-25 23:24:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 23:24:31 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-25 23:24:31 LOG5 end_task: Level: (4) ID = <10480> Status = 0 0 0 0 ok 2008-Apr-25 23:24:31 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-25 23:24:31 LOG5 end_task: Level: (3) ID = <10479> Status = 0 0 0 0 ok 2008-Apr-25 23:24:31 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-25 23:24:31 LOG5 finish_task: Level: (2) ID = <10446> Status = 0 0 0 0 ok 2008-Apr-25 23:24:31 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-25 23:24:31 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-25 23:24:31 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-25 23:24:31 LOG5 end_task: Level: (2) ID = <10446> Status = 0 0 0 0 ok 2008-Apr-25 23:24:31 COMMAND run_command_line: EXECUTING command 51: 'FIXEDDRIFT az=47.88 alfaangle=-21.7 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p1_061 ra=122900.00 dec=73000.00' 2008-Apr-25 23:24:31 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-25 23:24:32 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-25 23:24:32 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 47.88 -21.7 hcorcal 5 tracking no first 1 AGESVC1B_p1_061 122900.00 73000.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-25 23:24:32 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-25 23:24:32 LOG5 begin_task: Level: (2) ID = <10481> Status = 0 0 0 0 ok 2008-Apr-25 23:24:32 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGESVC1A_p2_067' 2008-Apr-25 23:24:32 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-25 23:24:32 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1B_p1_061} 2008-Apr-25 23:24:32 INFO3 fixed_driftmap: Sending telescope to Az = 47.88 and ZA = 15.80 2008-Apr-25 23:24:32 LOG3 track_source: Calling 'track_source AGESVC1B_p1_061 47.88 15.7981238782 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-25 23:24:32 START begin_task: Starting task 'sending tracking commands' 2008-Apr-25 23:24:32 LOG5 begin_task: Level: (3) ID = <10482> Status = 0 0 0 0 ok 2008-Apr-25 23:24:32 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p1_061} INFO {Slewing to source 'AGESVC1B_p1_061' ...} 2008-Apr-25 23:24:32 INFO1 track_source: Starting to track AGESVC1B_p1_061 2008-Apr-25 23:24:32 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p1_061" 2008-Apr-25 23:24:32 LOG3 vw_send: To DATATAKING: set ra 47.88 2008-Apr-25 23:24:32 LOG3 vw_send: To DATATAKING: set dec 15.7981238782 2008-Apr-25 23:24:32 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-25 23:24:32 LOG3 vw_send: To DATATAKING: pnt tr 47.88 15.7981238782 -CF 2008-Apr-25 23:24:32 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-25 23:24:32 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-25 23:24:32 LOG5 finish_task: Level: (3) ID = <10482> Status = 0 0 0 0 ok 2008-Apr-25 23:24:32 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-25 23:24:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 23:24:32 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-25 23:24:32 LOG5 end_task: Level: (3) ID = <10482> Status = 0 0 0 0 ok 2008-Apr-25 23:24:32 START begin_task: Starting task 'rotate ALFA to -21.7 degrees' 2008-Apr-25 23:24:32 LOG5 begin_task: Level: (3) ID = <10483> Status = 0 0 0 0 ok 2008-Apr-25 23:24:32 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -21.7 degrees ...} 2008-Apr-25 23:24:32 INFO2 rotate_alfa: ALFA commanded to -21.7 degrees 2008-Apr-25 23:24:32 LOG3 sock_errsend: To ALFAMOTOR: POSITION -21.7 REPLY 2008-Apr-25 23:24:32 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-25 23:24:32 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-25 23:24:32 LOG5 begin_task: Level: (4) ID = <10484> Status = 0 0 0 0 ok 2008-Apr-25 23:24:32 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p1_061" 2008-Apr-25 23:24:32 LOG4 got_cormsg: From DATATAKING: set ra 47.88 2008-Apr-25 23:24:32 LOG4 got_cormsg: From DATATAKING: set dec 15.7981238782 2008-Apr-25 23:24:32 LOG4 got_cormsg: From DATATAKING: vw% 47.88 2008-Apr-25 23:24:32 LOG4 got_cormsg: From DATATAKING: vw% 15.7981238782 2008-Apr-25 23:24:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 23:24:32 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-25 23:24:32 LOG4 got_cormsg: From DATATAKING: pnt tr 47.88 15.7981238782 -CF 2008-Apr-25 23:24:32 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-25 23:24:32 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-25 23:24:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 23:24:34 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-25 23:24:34 INFO3 alfa_motor: ALFA rotator in-position -21.70 degrees 2008-Apr-25 23:24:34 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-25 23:24:34 LOG5 end_task: Level: (4) ID = <10484> Status = 0 0 0 0 ok 2008-Apr-25 23:24:34 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-25 23:24:34 STOP finish_task: Finishing task 'rotate ALFA to -21.7 degrees' 2008-Apr-25 23:24:34 LOG5 finish_task: Level: (3) ID = <10483> Status = 0 0 0 0 ok 2008-Apr-25 23:24:34 INFO2 finish_task: DONE finished configuration: rotating ALFA to -21.7 degrees 2008-Apr-25 23:24:34 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 23:24:34 STOP end_task: Finishing task 'rotate ALFA to -21.7 degrees' with status 'OK' 2008-Apr-25 23:24:34 LOG5 end_task: Level: (3) ID = <10483> Status = 0 0 0 0 ok 2008-Apr-25 23:24:34 START begin_task: Starting task 'waiting on telescope' 2008-Apr-25 23:24:34 LOG5 begin_task: Level: (3) ID = <10485> Status = 0 0 0 0 ok 2008-Apr-25 23:24:34 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-25 23:24:35 LOG3 waittrk: Start waittrk 5 2008-Apr-25 23:24:35 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-25 23:24:35 LOG5 begin_task: Level: (4) ID = <10486> Status = 0 0 0 0 ok 2008-Apr-25 23:24:40 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-25 23:24:40 LOG5 end_task: Level: (4) ID = <10486> Status = 0 0 0 0 ok 2008-Apr-25 23:24:40 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-25 23:24:40 LOG5 begin_task: Level: (4) ID = <10487> Status = 0 0 0 0 ok 2008-Apr-25 23:24:51 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-25 23:24:51 LOG5 end_task: Level: (4) ID = <10487> Status = 0 0 0 0 ok 2008-Apr-25 23:24:51 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-25 23:24:51 INFO2 waittrk: Now tracking AGESVC1B_p1_061 2008-Apr-25 23:24:51 LOG4 waittrk: Current telescope position: Az = 407.65 ZA = 15.79 2008-Apr-25 23:24:51 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-25 23:24:51 LOG5 finish_task: Level: (3) ID = <10485> Status = 0 0 0 0 ok 2008-Apr-25 23:24:51 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-25 23:24:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 23:24:51 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-25 23:24:51 LOG5 end_task: Level: (3) ID = <10485> Status = 0 0 0 0 ok 2008-Apr-25 23:24:51 START begin_task: Starting task 'selecting calibration type' 2008-Apr-25 23:24:51 LOG5 begin_task: Level: (3) ID = <10488> Status = 0 0 0 0 ok 2008-Apr-25 23:24:51 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-25 23:24:51 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-25 23:24:51 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 23:24:51 START begin_task: Starting task 'waiting on setcal' 2008-Apr-25 23:24:51 LOG5 begin_task: Level: (4) ID = <10489> Status = 0 0 0 0 ok 2008-Apr-25 23:24:51 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-25 23:24:51 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 23:24:52 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 23:24:52 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-25 23:24:52 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-25 23:24:52 LOG5 end_task: Level: (4) ID = <10489> Status = 0 0 0 0 ok 2008-Apr-25 23:24:52 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-25 23:24:52 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 23:24:52 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-25 23:24:52 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 23:24:52 LOG5 begin_task: Level: (4) ID = <10490> Status = 0 0 0 0 ok 2008-Apr-25 23:24:52 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 23:24:52 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 23:24:52 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 23:24:52 LOG5 end_task: Level: (4) ID = <10490> Status = 0 0 0 0 ok 2008-Apr-25 23:24:52 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 23:24:52 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-25 23:24:52 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 23:24:52 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-25 23:24:52 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 23:24:52 LOG5 begin_task: Level: (4) ID = <10491> Status = 0 0 0 0 ok 2008-Apr-25 23:24:52 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 23:24:52 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 23:24:52 LOG5 end_task: Level: (4) ID = <10491> Status = 0 0 0 0 ok 2008-Apr-25 23:24:52 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 23:24:52 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-25 23:24:52 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-25 23:24:52 LOG5 finish_task: Level: (3) ID = <10488> Status = 0 0 0 0 ok 2008-Apr-25 23:24:52 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-25 23:24:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 23:24:52 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-25 23:24:52 LOG5 end_task: Level: (3) ID = <10488> Status = 0 0 0 0 ok 2008-Apr-25 23:24:52 LOG5 dopset_later: Calling 'dopset_later 35.195890992515956' 2008-Apr-25 23:24:52 INFO3 dopset_later: Setting Doppler correction for 23:25:27 (35.2 seconds from now) 2008-Apr-25 23:24:52 LOG5 antvel: Calling 'antvel 47.880000 15.798124 F 35.195890992515956' 2008-Apr-25 23:24:52 LOG2 antvel: Parameters to Doppler: Heliocentric 98727 2008 116 0.0 2008-Apr-25 23:24:52 INFO5 antvel: Computed antenna velocity: +15.36508 km/s 2008-Apr-25 23:24:52 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=15.3650849908 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-25 23:24:52 INFO4 dopset_gen: New sky frequencies: 1381.172640 1381.172640 1381.172640 1381.172640 1381.172640 1381.172640 1381.172640 1381.172640 1381.172640 2008-Apr-25 23:24:52 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.172640 sky0=1381.172640 sky1=1381.172640 sky2=1381.172640 sky3=1381.172640 sky4=1381.172640 sky5=1381.172640 sky6=1381.172640 sky7=1381.172640 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-25 23:24:52 LOG2 dopset_gen: Result from 'sky2syn': 1631.172640 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-25 23:24:52 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631172640.0} 2008-Apr-25 23:24:52 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 23:24:52 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-25 23:24:52 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-25 23:24:52 INFO5 fixed_driftmap: Tracking J2000 position: RA = 12:28:29.4 Dec = +07:29:50.5 2008-Apr-25 23:24:52 LOG3 track_source: Calling 'track_source AGESVC1B_p1_061 122829.4 072950.5 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-25 23:24:52 START begin_task: Starting task 'sending tracking commands' 2008-Apr-25 23:24:52 LOG5 begin_task: Level: (3) ID = <10492> Status = 0 0 0 0 ok 2008-Apr-25 23:24:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p1_061} INFO {Slewing to source 'AGESVC1B_p1_061' ...} 2008-Apr-25 23:24:52 INFO1 track_source: Starting to track AGESVC1B_p1_061 2008-Apr-25 23:24:52 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p1_061" 2008-Apr-25 23:24:52 LOG3 vw_send: To DATATAKING: set ra 122829.4 2008-Apr-25 23:24:52 LOG3 vw_send: To DATATAKING: set dec 072950.5 2008-Apr-25 23:24:52 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-25 23:24:52 LOG3 vw_send: To DATATAKING: pnt tr 122829.4 072950.5 -CJ 2008-Apr-25 23:24:53 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-25 23:24:53 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-25 23:24:53 LOG5 finish_task: Level: (3) ID = <10492> Status = 0 0 0 0 ok 2008-Apr-25 23:24:53 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-25 23:24:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 23:24:53 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-25 23:24:53 LOG5 end_task: Level: (3) ID = <10492> Status = 0 0 0 0 ok 2008-Apr-25 23:24:53 START begin_task: Starting task 'waiting on telescope' 2008-Apr-25 23:24:53 LOG5 begin_task: Level: (3) ID = <10493> Status = 0 0 0 0 ok 2008-Apr-25 23:24:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-25 23:24:53 LOG3 waittrk: Start waittrk 5 2008-Apr-25 23:24:53 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-25 23:24:53 LOG5 begin_task: Level: (4) ID = <10494> Status = 0 0 0 0 ok 2008-Apr-25 23:24:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631172640.0} 2008-Apr-25 23:24:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 23:24:53 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p1_061" 2008-Apr-25 23:24:53 LOG4 got_cormsg: From DATATAKING: set ra 122829.4 2008-Apr-25 23:24:53 LOG4 got_cormsg: From DATATAKING: set dec 072950.5 2008-Apr-25 23:24:53 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2008-Apr-25 23:24:53 LOG4 got_cormsg: From DATATAKING: 122829.4 2008-Apr-25 23:24:53 LOG4 got_cormsg: From DATATAKING: vw% 072950.5 2008-Apr-25 23:24:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 23:24:53 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-25 23:24:53 LOG4 got_cormsg: From DATATAKING: pnt tr 122829.4 072950.5 -CJ 2008-Apr-25 23:24:53 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-25 23:24:53 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-25 23:24:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 23:24:58 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-25 23:24:58 LOG5 end_task: Level: (4) ID = <10494> Status = 0 0 0 0 ok 2008-Apr-25 23:24:58 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-25 23:24:58 LOG5 begin_task: Level: (4) ID = <10495> Status = 0 0 0 0 ok 2008-Apr-25 23:25:00 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-25 23:25:00 LOG5 end_task: Level: (4) ID = <10495> Status = 0 0 0 0 ok 2008-Apr-25 23:25:00 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-25 23:25:00 INFO2 waittrk: Now tracking AGESVC1B_p1_061 2008-Apr-25 23:25:00 LOG4 waittrk: Current telescope position: Az = 407.69 ZA = 15.80 2008-Apr-25 23:25:00 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-25 23:25:00 LOG5 finish_task: Level: (3) ID = <10493> Status = 0 0 0 0 ok 2008-Apr-25 23:25:00 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-25 23:25:00 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 23:25:00 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-25 23:25:00 LOG5 end_task: Level: (3) ID = <10493> Status = 0 0 0 0 ok 2008-Apr-25 23:25:00 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-25 23:25:00 LOG5 begin_task: Level: (3) ID = <10496> Status = 0 0 0 0 ok 2008-Apr-25 23:25:00 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-25 23:25:00 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-25 23:25:00 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-25 23:25:00 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-25 23:25:00 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 23:25:00 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-25 23:25:00 LOG5 begin_task: Level: (4) ID = <10497> Status = 0 0 0 0 ok 2008-Apr-25 23:25:00 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-25 23:25:00 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 23:25:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 23:25:00 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-25 23:25:00 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-25 23:25:00 LOG5 end_task: Level: (4) ID = <10497> Status = 0 0 0 0 ok 2008-Apr-25 23:25:00 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-25 23:25:00 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-25 23:25:00 LOG5 begin_task: Level: (4) ID = <10498> Status = 0 0 0 0 ok 2008-Apr-25 23:25:00 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-25 23:25:00 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-25 23:25:00 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-25 23:25:00 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-25 23:25:00 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-25 23:25:00 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-25 23:25:00 LOG5 begin_task: Level: (5) ID = <10499> Status = 0 0 0 0 ok 2008-Apr-25 23:25:00 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-25 23:25:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 23:25:01 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 1 dB --- beam 1: 8 6 dB 2008-Apr-25 23:25:01 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 4 dB 2008-Apr-25 23:25:01 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 6 dB 2008-Apr-25 23:25:01 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 3 3 dB 2008-Apr-25 23:25:01 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-25 23:25:01 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-25 23:25:01 LOG5 end_task: Level: (5) ID = <10499> Status = 0 0 0 0 ok 2008-Apr-25 23:25:01 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.936 0.947 ALFA beam 1: 0.903 1.068 2008-Apr-25 23:25:01 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.068 0.987 ALFA beam 3: 1.095 0.884 2008-Apr-25 23:25:01 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.970 1.003 ALFA beam 5: 1.080 0.925 2008-Apr-25 23:25:01 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.082 1.076 ALFA beam 7: 0.949 0.953 2008-Apr-25 23:25:01 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-25 23:25:01 LOG5 finish_task: Level: (4) ID = <10498> Status = 0 0 0 0 ok 2008-Apr-25 23:25:01 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-25 23:25:01 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 23:25:01 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-25 23:25:01 LOG5 end_task: Level: (4) ID = <10498> Status = 0 0 0 0 ok 2008-Apr-25 23:25:01 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-25 23:25:01 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-25 23:25:01 LOG5 finish_task: Level: (3) ID = <10496> Status = 0 0 0 0 ok 2008-Apr-25 23:25:01 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-25 23:25:01 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 23:25:01 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-25 23:25:01 LOG5 end_task: Level: (3) ID = <10496> Status = 0 0 0 0 ok 2008-Apr-25 23:25:01 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 EM, RM 2008-Apr-25 23:25:01 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 EM, RM 2008-Apr-25 23:25:01 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 EM, RM 2008-Apr-25 23:25:01 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 EM, RM 2008-Apr-25 23:25:01 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-25 23:25:01 START begin_task: Starting task 'WAPP calibration' 2008-Apr-25 23:25:01 LOG5 begin_task: Level: (3) ID = <10500> Status = 0 0 0 0 ok 2008-Apr-25 23:25:01 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-25 23:25:01 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-25 23:25:01 START begin_task: Starting task 'selecting calibration type' 2008-Apr-25 23:25:01 LOG5 begin_task: Level: (4) ID = <10501> Status = 0 0 0 0 ok 2008-Apr-25 23:25:01 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-25 23:25:01 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-25 23:25:01 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 23:25:01 START begin_task: Starting task 'waiting on setcal' 2008-Apr-25 23:25:01 LOG5 begin_task: Level: (5) ID = <10502> Status = 0 0 0 0 ok 2008-Apr-25 23:25:01 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 EM, RM' 2008-Apr-25 23:25:01 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-25 23:25:01 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 23:25:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 23:25:02 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-25 23:25:02 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-25 23:25:02 LOG5 end_task: Level: (5) ID = <10502> Status = 0 0 0 0 ok 2008-Apr-25 23:25:02 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-25 23:25:02 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 23:25:02 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-25 23:25:02 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 23:25:02 LOG5 begin_task: Level: (5) ID = <10503> Status = 0 0 0 0 ok 2008-Apr-25 23:25:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 23:25:02 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 23:25:02 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 23:25:02 LOG5 end_task: Level: (5) ID = <10503> Status = 0 0 0 0 ok 2008-Apr-25 23:25:02 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 23:25:02 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-25 23:25:02 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 23:25:02 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-25 23:25:02 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 23:25:02 LOG5 begin_task: Level: (5) ID = <10504> Status = 0 0 0 0 ok 2008-Apr-25 23:25:02 NOTE WAPPDATA-new_file: New FITS file: wapp.20080425.a2048.0012.fits 2008-Apr-25 23:25:02 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 23:25:02 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 23:25:02 LOG5 end_task: Level: (5) ID = <10504> Status = 0 0 0 0 ok 2008-Apr-25 23:25:02 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 23:25:02 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-25 23:25:02 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-25 23:25:02 LOG5 finish_task: Level: (4) ID = <10501> Status = 0 0 0 0 ok 2008-Apr-25 23:25:02 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-25 23:25:02 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 23:25:02 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-25 23:25:02 LOG5 end_task: Level: (4) ID = <10501> Status = 0 0 0 0 ok 2008-Apr-25 23:25:02 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-25 23:25:02 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-25 23:25:02 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-25 23:25:02 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-25 23:25:02 LOG5 begin_task: Level: (4) ID = <10505> Status = 0 0 0 0 ok 2008-Apr-25 23:25:02 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080425.a2048.0012.fits} 2008-Apr-25 23:25:02 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-25 23:25:02 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-25 23:25:02 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-25 23:25:02 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-25 23:25:02 LOG5 end_task: Level: (4) ID = <10505> Status = 0 0 0 0 ok 2008-Apr-25 23:25:02 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-25 23:25:02 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-25 23:25:02 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-25 23:25:02 LOG5 begin_task: Level: (4) ID = <10506> Status = 0 0 0 0 ok 2008-Apr-25 23:25:02 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-25 23:25:02 LOG5 log_alfabeam: Parameters: 12.474833333333331 7.4973611111111111 13.266964 2008.320262028798 -21.700069 2008-Apr-25 23:25:02 LOG4 log_alfabeam: ALFABEAM 0 12.474833333333335 7.497361111111109 2008-Apr-25 23:25:02 LOG4 log_alfabeam: ALFABEAM 1 12.474621650871088 7.594753843546093 2008-Apr-25 23:25:02 LOG4 log_alfabeam: ALFABEAM 2 12.468931870401500 7.530279858454913 2008-Apr-25 23:25:02 LOG4 log_alfabeam: ALFABEAM 3 12.469161469964705 7.432552712874862 2008-Apr-25 23:25:02 LOG4 log_alfabeam: ALFABEAM 4 12.475087704052436 7.399775978526043 2008-Apr-25 23:25:02 LOG4 log_alfabeam: ALFABEAM 5 12.480735629643293 7.465030646115337 2008-Apr-25 23:25:02 LOG4 log_alfabeam: ALFABEAM 6 12.480499281392248 7.562282717680269 2008-Apr-25 23:25:02 INFO2 take_spectra: Starting WAPP scan: 811600135 2008-Apr-25 23:25:03 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-25 23:25:03 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-25 23:25:03 LOG5 begin_task: Level: (5) ID = <10507> Status = 0 0 0 0 ok 2008-Apr-25 23:25:03 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 23:25:03 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12304.00 2008-Apr-25 23:25:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.172640 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 23:25:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.172640 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 23:25:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.172640 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 23:25:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.172640 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 23:25:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.172640 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 23:25:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.172640 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 23:25:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.172640 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 23:25:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.172640 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 23:25:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.172640 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 23:25:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 23:25:09 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-25 23:25:09 LOG5 end_task: Level: (5) ID = <10507> Status = 0 0 0 0 ok 2008-Apr-25 23:25:09 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-25 23:25:09 LOG5 end_task: Level: (4) ID = <10506> Status = 0 0 0 0 ok 2008-Apr-25 23:25:09 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-25 23:25:09 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-25 23:25:09 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-25 23:25:09 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-25 23:25:09 LOG5 begin_task: Level: (4) ID = <10508> Status = 0 0 0 0 ok 2008-Apr-25 23:25:10 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-25 23:25:10 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-25 23:25:10 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-25 23:25:10 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-25 23:25:10 LOG5 end_task: Level: (4) ID = <10508> Status = 0 0 0 0 ok 2008-Apr-25 23:25:10 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-25 23:25:10 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-25 23:25:10 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-25 23:25:10 LOG5 begin_task: Level: (4) ID = <10509> Status = 0 0 0 0 ok 2008-Apr-25 23:25:10 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-25 23:25:10 LOG5 log_alfabeam: Parameters: 12.474833333333331 7.4973611111111111 13.269192 2008.3202622823028 -21.700069 2008-Apr-25 23:25:10 LOG4 log_alfabeam: ALFABEAM 0 12.474833333333336 7.497361111111113 2008-Apr-25 23:25:10 LOG4 log_alfabeam: ALFABEAM 1 12.474630516483177 7.594758183734605 2008-Apr-25 23:25:10 LOG4 log_alfabeam: ALFABEAM 2 12.468934880884266 7.530398585746098 2008-Apr-25 23:25:10 LOG4 log_alfabeam: ALFABEAM 3 12.469155561004399 7.432667264797897 2008-Apr-25 23:25:10 LOG4 log_alfabeam: ALFABEAM 4 12.475078757811465 7.399771078677405 2008-Apr-25 23:25:10 LOG4 log_alfabeam: ALFABEAM 5 12.480732668954531 7.464910952349538 2008-Apr-25 23:25:10 LOG4 log_alfabeam: ALFABEAM 6 12.480505212862054 7.562168082027281 2008-Apr-25 23:25:10 INFO2 take_spectra: Starting WAPP scan: 811600136 2008-Apr-25 23:25:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-25 23:25:10 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-25 23:25:10 LOG5 begin_task: Level: (5) ID = <10510> Status = 0 0 0 0 ok 2008-Apr-25 23:25:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 23:25:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12311.00 2008-Apr-25 23:25:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.491 > 1.4)! 2008-Apr-25 23:25:15 LOG4 check_wapp_levels: WAPP-1 power levels: 1.272 1.210 1.211 1.447 2008-Apr-25 23:25:15 LOG4 check_wapp_levels: WAPP-2 power levels: 1.440 1.346 1.473 1.212 2008-Apr-25 23:25:15 LOG4 check_wapp_levels: WAPP-3 power levels: 1.338 1.381 1.485 1.229 2008-Apr-25 23:25:15 LOG4 check_wapp_levels: WAPP-4 power levels: 1.491 1.480 1.305 1.309 2008-Apr-25 23:25:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.172640 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 23:25:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.172640 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 23:25:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.172640 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 23:25:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.172640 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 23:25:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.172640 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 23:25:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.172640 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 23:25:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.172640 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 23:25:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.172640 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 23:25:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.172640 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 23:25:16 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-25 23:25:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 23:25:16 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-25 23:25:16 LOG5 end_task: Level: (5) ID = <10510> Status = 0 0 0 0 ok 2008-Apr-25 23:25:16 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-25 23:25:16 LOG5 end_task: Level: (4) ID = <10509> Status = 0 0 0 0 ok 2008-Apr-25 23:25:16 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-25 23:25:16 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-25 23:25:16 LOG5 finish_task: Level: (3) ID = <10500> Status = 0 0 0 0 ok 2008-Apr-25 23:25:16 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-25 23:25:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 23:25:16 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-25 23:25:16 LOG5 end_task: Level: (3) ID = <10500> Status = 0 0 0 0 ok 2008-Apr-25 23:25:17 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-25 23:25:17 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 47.88 and ZA = 15.80 2008-Apr-25 23:25:17 LOG3 track_source: Calling 'track_source AGESVC1B_p1_061 47.88 15.7981238782 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-25 23:25:17 START begin_task: Starting task 'sending tracking commands' 2008-Apr-25 23:25:17 LOG5 begin_task: Level: (3) ID = <10511> Status = 0 0 0 0 ok 2008-Apr-25 23:25:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p1_061} INFO {Slewing to source 'AGESVC1B_p1_061' ...} 2008-Apr-25 23:25:17 INFO1 track_source: Starting to track AGESVC1B_p1_061 2008-Apr-25 23:25:17 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p1_061" 2008-Apr-25 23:25:17 LOG3 vw_send: To DATATAKING: set ra 47.88 2008-Apr-25 23:25:17 LOG3 vw_send: To DATATAKING: set dec 15.7981238782 2008-Apr-25 23:25:17 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-25 23:25:17 LOG3 vw_send: To DATATAKING: pnt tr 47.88 15.7981238782 -CF 2008-Apr-25 23:25:17 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-25 23:25:17 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-25 23:25:17 LOG5 finish_task: Level: (3) ID = <10511> Status = 0 0 0 0 ok 2008-Apr-25 23:25:17 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-25 23:25:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 23:25:17 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-25 23:25:17 LOG5 end_task: Level: (3) ID = <10511> Status = 0 0 0 0 ok 2008-Apr-25 23:25:17 LOG1 fixed_driftmap: Parameters: HA = +00:47:00.2 Start = 13:16:27.3 LST = 13:16:16.1 diff = 11.2 secs 2008-Apr-25 23:25:17 INFO2 fixed_driftmap: Waiting 9.2 seconds for RA 12:29:27 2008-Apr-25 23:25:17 INFO2 lstwait: Waiting for 9.2 secs from LST 13:16:16 to LST 13:16:25 ... 2008-Apr-25 23:25:17 LOG4 send_obs_status: To obs_status: <1> TASKTIME 9.2010615989186508 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-25 23:25:17 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-25 23:25:17 LOG5 begin_task: Level: (3) ID = <10512> Status = 0 0 0 0 ok 2008-Apr-25 23:25:17 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p1_061" 2008-Apr-25 23:25:17 LOG4 got_cormsg: From DATATAKING: set ra 47.88 2008-Apr-25 23:25:17 LOG4 got_cormsg: From DATATAKING: set dec 15.7981238782 2008-Apr-25 23:25:17 LOG4 got_cormsg: From DATATAKING: vw% 47.88 2008-Apr-25 23:25:17 LOG4 got_cormsg: From DATATAKING: vw% 15.7981238782 2008-Apr-25 23:25:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 23:25:17 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-25 23:25:17 LOG4 got_cormsg: From DATATAKING: pnt tr 47.88 15.7981238782 -CF 2008-Apr-25 23:25:17 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-25 23:25:17 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-25 23:25:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 23:25:21 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.902 and 1.097 2008-Apr-25 23:25:26 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-25 23:25:26 LOG5 end_task: Level: (3) ID = <10512> Status = 0 0 0 0 ok 2008-Apr-25 23:25:26 LOG4 lstwait: Finished waiting, the gui caused difference: 0.79974704000349561 2008-Apr-25 23:25:26 INFO3 lstwait: Finished waiting 2008-Apr-25 23:25:26 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-25 23:25:26 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-25 23:25:26 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-25 23:25:26 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-25 23:25:26 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-25 23:25:26 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-25 23:25:26 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-25 23:25:26 LOG5 begin_task: Level: (3) ID = <10513> Status = 0 0 0 0 ok 2008-Apr-25 23:25:26 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-25 23:25:26 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-25 23:25:26 INFO2 take_spectra: Starting WAPP scan: 811600137 2008-Apr-25 23:25:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-25 23:25:27 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-25 23:25:27 LOG5 begin_task: Level: (4) ID = <10514> Status = 0 0 0 0 ok 2008-Apr-25 23:25:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 23:25:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12328.00 2008-Apr-25 23:25:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.172640 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 23:25:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.172640 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 23:25:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.172640 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 23:25:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.172640 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 23:25:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.172640 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 23:25:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.172640 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 23:25:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.172640 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 23:25:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.172640 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 23:25:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.172640 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 23:37:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.426 > 1.4)! 2008-Apr-25 23:37:55 LOG4 check_wapp_levels: WAPP-1 power levels: 0.947 1.426 0.918 1.091 2008-Apr-25 23:37:55 LOG4 check_wapp_levels: WAPP-2 power levels: 1.062 0.979 1.056 0.871 2008-Apr-25 23:37:55 LOG4 check_wapp_levels: WAPP-3 power levels: 0.983 1.008 1.085 0.925 2008-Apr-25 23:37:55 LOG4 check_wapp_levels: WAPP-4 power levels: 1.092 1.080 0.954 0.956 2008-Apr-25 23:37:57 INFO5 check_wapp_levels: WAPP power levels are between 0.871 and 1.483 (still bad) 2008-Apr-25 23:37:59 INFO5 check_wapp_levels: WAPP power levels are between 0.871 and 1.513 (still bad) 2008-Apr-25 23:38:01 INFO5 check_wapp_levels: WAPP power levels are between 0.871 and 1.526 (still bad) 2008-Apr-25 23:38:03 INFO5 check_wapp_levels: WAPP power levels are between 0.871 and 1.532 (still bad) 2008-Apr-25 23:38:06 INFO5 check_wapp_levels: WAPP power levels are between 0.871 and 1.532 (still bad) 2008-Apr-25 23:38:08 INFO5 check_wapp_levels: WAPP power levels are between 0.870 and 1.530 (still bad) 2008-Apr-25 23:38:10 INFO5 check_wapp_levels: WAPP power levels are between 0.871 and 1.523 (still bad) 2008-Apr-25 23:38:12 INFO5 check_wapp_levels: WAPP power levels are between 0.871 and 1.406 (still bad) 2008-Apr-25 23:38:14 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.871 and 1.124 2008-Apr-25 23:38:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.796 < 0.8)! 2008-Apr-25 23:38:48 LOG4 check_wapp_levels: WAPP-1 power levels: 0.959 0.796 0.924 1.116 2008-Apr-25 23:38:48 LOG4 check_wapp_levels: WAPP-2 power levels: 1.065 0.981 1.059 0.871 2008-Apr-25 23:38:48 LOG4 check_wapp_levels: WAPP-3 power levels: 0.978 1.003 1.083 0.924 2008-Apr-25 23:38:48 LOG4 check_wapp_levels: WAPP-4 power levels: 1.089 1.080 0.954 0.956 2008-Apr-25 23:38:50 INFO5 check_wapp_levels: WAPP power levels are between 0.781 and 1.116 (still bad) 2008-Apr-25 23:38:52 INFO5 check_wapp_levels: WAPP power levels are between 0.778 and 1.115 (still bad) 2008-Apr-25 23:38:54 INFO5 check_wapp_levels: WAPP power levels are between 0.771 and 1.112 (still bad) 2008-Apr-25 23:38:56 INFO5 check_wapp_levels: WAPP power levels are between 0.767 and 1.114 (still bad) 2008-Apr-25 23:38:58 INFO5 check_wapp_levels: WAPP power levels are between 0.766 and 1.113 (still bad) 2008-Apr-25 23:39:00 INFO5 check_wapp_levels: WAPP power levels are between 0.764 and 1.109 (still bad) 2008-Apr-25 23:39:02 INFO5 check_wapp_levels: WAPP power levels are between 0.763 and 1.110 (still bad) 2008-Apr-25 23:39:04 INFO5 check_wapp_levels: WAPP power levels are between 0.769 and 1.109 (still bad) 2008-Apr-25 23:39:06 INFO5 check_wapp_levels: WAPP power levels are between 0.759 and 1.109 (still bad) 2008-Apr-25 23:39:08 INFO5 check_wapp_levels: WAPP power levels are between 0.766 and 1.107 (still bad) 2008-Apr-25 23:39:10 INFO5 check_wapp_levels: WAPP power levels are between 0.763 and 1.109 (still bad) 2008-Apr-25 23:39:12 INFO5 check_wapp_levels: WAPP power levels are between 0.765 and 1.107 (still bad) 2008-Apr-25 23:39:14 INFO5 check_wapp_levels: WAPP power levels are between 0.765 and 1.106 (still bad) 2008-Apr-25 23:39:16 INFO5 check_wapp_levels: WAPP power levels are between 0.790 and 1.111 (still bad) 2008-Apr-25 23:39:18 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.871 and 1.113 2008-Apr-25 23:42:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.470 < 0.8)! 2008-Apr-25 23:42:35 LOG4 check_wapp_levels: WAPP-1 power levels: 0.945 0.470 0.912 1.094 2008-Apr-25 23:42:35 LOG4 check_wapp_levels: WAPP-2 power levels: 1.063 0.980 1.060 0.875 2008-Apr-25 23:42:35 LOG4 check_wapp_levels: WAPP-3 power levels: 0.979 1.008 1.090 0.933 2008-Apr-25 23:42:35 LOG4 check_wapp_levels: WAPP-4 power levels: 1.090 1.079 0.951 0.954 2008-Apr-25 23:42:37 INFO5 check_wapp_levels: WAPP power levels are between 0.473 and 1.094 (still bad) 2008-Apr-25 23:42:39 INFO5 check_wapp_levels: WAPP power levels are between 0.475 and 1.095 (still bad) 2008-Apr-25 23:42:41 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.096 (still bad) 2008-Apr-25 23:42:43 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.098 (still bad) 2008-Apr-25 23:42:45 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.099 (still bad) 2008-Apr-25 23:42:47 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.099 (still bad) 2008-Apr-25 23:42:49 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.099 (still bad) 2008-Apr-25 23:42:51 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.095 (still bad) 2008-Apr-25 23:42:53 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.095 (still bad) 2008-Apr-25 23:42:55 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.092 (still bad) 2008-Apr-25 23:42:57 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.092 (still bad) 2008-Apr-25 23:42:59 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.092 (still bad) 2008-Apr-25 23:43:01 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.093 (still bad) 2008-Apr-25 23:43:03 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.093 (still bad) 2008-Apr-25 23:43:05 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.092 (still bad) 2008-Apr-25 23:43:07 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.092 (still bad) 2008-Apr-25 23:43:09 INFO5 check_wapp_levels: WAPP power levels are between 0.608 and 1.091 (still bad) 2008-Apr-25 23:43:11 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.842 and 1.093 2008-Apr-25 23:43:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.799 < 0.8)! 2008-Apr-25 23:43:23 LOG4 check_wapp_levels: WAPP-1 power levels: 0.939 0.799 0.907 1.089 2008-Apr-25 23:43:23 LOG4 check_wapp_levels: WAPP-2 power levels: 1.073 0.991 1.055 0.873 2008-Apr-25 23:43:23 LOG4 check_wapp_levels: WAPP-3 power levels: 0.980 1.005 1.082 0.927 2008-Apr-25 23:43:23 LOG4 check_wapp_levels: WAPP-4 power levels: 1.092 1.078 0.955 0.954 2008-Apr-25 23:43:25 INFO5 check_wapp_levels: WAPP power levels are between 0.796 and 1.094 (still bad) 2008-Apr-25 23:43:27 INFO5 check_wapp_levels: WAPP power levels are between 0.793 and 1.097 (still bad) 2008-Apr-25 23:43:29 INFO5 check_wapp_levels: WAPP power levels are between 0.790 and 1.101 (still bad) 2008-Apr-25 23:43:31 INFO5 check_wapp_levels: WAPP power levels are between 0.787 and 1.105 (still bad) 2008-Apr-25 23:43:33 INFO5 check_wapp_levels: WAPP power levels are between 0.785 and 1.109 (still bad) 2008-Apr-25 23:43:35 INFO5 check_wapp_levels: WAPP power levels are between 0.784 and 1.108 (still bad) 2008-Apr-25 23:43:37 INFO5 check_wapp_levels: WAPP power levels are between 0.780 and 1.109 (still bad) 2008-Apr-25 23:43:39 INFO5 check_wapp_levels: WAPP power levels are between 0.779 and 1.107 (still bad) 2008-Apr-25 23:43:41 INFO5 check_wapp_levels: WAPP power levels are between 0.779 and 1.103 (still bad) 2008-Apr-25 23:43:43 INFO5 check_wapp_levels: WAPP power levels are between 0.778 and 1.100 (still bad) 2008-Apr-25 23:43:46 INFO5 check_wapp_levels: WAPP power levels are between 0.777 and 1.095 (still bad) 2008-Apr-25 23:43:48 INFO5 check_wapp_levels: WAPP power levels are between 0.778 and 1.094 (still bad) 2008-Apr-25 23:43:50 INFO5 check_wapp_levels: WAPP power levels are between 0.780 and 1.092 (still bad) 2008-Apr-25 23:43:52 INFO5 check_wapp_levels: WAPP power levels are between 0.781 and 1.092 (still bad) 2008-Apr-25 23:43:54 INFO5 check_wapp_levels: WAPP power levels are between 0.778 and 1.092 (still bad) 2008-Apr-25 23:43:56 INFO5 check_wapp_levels: WAPP power levels are between 0.778 and 1.092 (still bad) 2008-Apr-25 23:43:58 INFO5 check_wapp_levels: WAPP power levels are between 0.774 and 1.093 (still bad) 2008-Apr-25 23:44:00 INFO5 check_wapp_levels: WAPP power levels are between 0.772 and 1.091 (still bad) 2008-Apr-25 23:44:02 INFO5 check_wapp_levels: WAPP power levels are between 0.769 and 1.093 (still bad) 2008-Apr-25 23:44:04 INFO5 check_wapp_levels: WAPP power levels are between 0.767 and 1.093 (still bad) 2008-Apr-25 23:44:06 INFO5 check_wapp_levels: WAPP power levels are between 0.766 and 1.092 (still bad) 2008-Apr-25 23:44:08 INFO5 check_wapp_levels: WAPP power levels are between 0.766 and 1.093 (still bad) 2008-Apr-25 23:44:10 INFO5 check_wapp_levels: WAPP power levels are between 0.765 and 1.093 (still bad) 2008-Apr-25 23:44:12 INFO5 check_wapp_levels: WAPP power levels are between 0.766 and 1.093 (still bad) 2008-Apr-25 23:44:14 INFO5 check_wapp_levels: WAPP power levels are between 0.765 and 1.096 (still bad) 2008-Apr-25 23:44:16 INFO5 check_wapp_levels: WAPP power levels are between 0.765 and 1.096 (still bad) 2008-Apr-25 23:44:18 INFO5 check_wapp_levels: WAPP power levels are between 0.764 and 1.093 (still bad) 2008-Apr-25 23:44:20 INFO5 check_wapp_levels: WAPP power levels are between 0.763 and 1.090 (still bad) 2008-Apr-25 23:44:22 INFO5 check_wapp_levels: WAPP power levels are between 0.762 and 1.092 (still bad) 2008-Apr-25 23:44:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.762 < 0.8)! 2008-Apr-25 23:44:24 LOG4 check_wapp_levels: WAPP-1 power levels: 0.941 0.762 0.905 1.083 2008-Apr-25 23:44:24 LOG4 check_wapp_levels: WAPP-2 power levels: 1.074 0.990 1.056 0.872 2008-Apr-25 23:44:24 LOG4 check_wapp_levels: WAPP-3 power levels: 0.980 1.010 1.083 0.930 2008-Apr-25 23:44:24 LOG4 check_wapp_levels: WAPP-4 power levels: 1.091 1.077 0.953 0.955 2008-Apr-25 23:44:26 INFO5 check_wapp_levels: WAPP power levels are between 0.762 and 1.092 (still bad) 2008-Apr-25 23:44:28 INFO5 check_wapp_levels: WAPP power levels are between 0.762 and 1.091 (still bad) 2008-Apr-25 23:44:30 INFO5 check_wapp_levels: WAPP power levels are between 0.763 and 1.091 (still bad) 2008-Apr-25 23:44:32 INFO5 check_wapp_levels: WAPP power levels are between 0.761 and 1.092 (still bad) 2008-Apr-25 23:44:34 INFO5 check_wapp_levels: WAPP power levels are between 0.762 and 1.091 (still bad) 2008-Apr-25 23:44:36 INFO5 check_wapp_levels: WAPP power levels are between 0.761 and 1.090 (still bad) 2008-Apr-25 23:44:38 INFO5 check_wapp_levels: WAPP power levels are between 0.761 and 1.090 (still bad) 2008-Apr-25 23:44:40 INFO5 check_wapp_levels: WAPP power levels are between 0.762 and 1.089 (still bad) 2008-Apr-25 23:44:42 INFO5 check_wapp_levels: WAPP power levels are between 0.762 and 1.090 (still bad) 2008-Apr-25 23:44:44 INFO5 check_wapp_levels: WAPP power levels are between 0.761 and 1.091 (still bad) 2008-Apr-25 23:44:46 INFO5 check_wapp_levels: WAPP power levels are between 0.761 and 1.091 (still bad) 2008-Apr-25 23:44:48 INFO5 check_wapp_levels: WAPP power levels are between 0.762 and 1.091 (still bad) 2008-Apr-25 23:44:50 INFO5 check_wapp_levels: WAPP power levels are between 0.760 and 1.091 (still bad) 2008-Apr-25 23:44:52 INFO5 check_wapp_levels: WAPP power levels are between 0.760 and 1.092 (still bad) 2008-Apr-25 23:44:54 INFO5 check_wapp_levels: WAPP power levels are between 0.760 and 1.092 (still bad) 2008-Apr-25 23:44:56 INFO5 check_wapp_levels: WAPP power levels are between 0.761 and 1.092 (still bad) 2008-Apr-25 23:44:58 INFO5 check_wapp_levels: WAPP power levels are between 0.766 and 1.091 (still bad) 2008-Apr-25 23:45:00 INFO5 check_wapp_levels: WAPP power levels are between 0.762 and 1.091 (still bad) 2008-Apr-25 23:45:02 INFO5 check_wapp_levels: WAPP power levels are between 0.765 and 1.092 (still bad) 2008-Apr-25 23:45:04 INFO5 check_wapp_levels: WAPP power levels are between 0.765 and 1.092 (still bad) 2008-Apr-25 23:45:06 INFO5 check_wapp_levels: WAPP power levels are between 0.767 and 1.093 (still bad) 2008-Apr-25 23:45:08 INFO5 check_wapp_levels: WAPP power levels are between 0.760 and 1.091 (still bad) 2008-Apr-25 23:45:10 INFO5 check_wapp_levels: WAPP power levels are between 0.763 and 1.091 (still bad) 2008-Apr-25 23:45:13 INFO5 check_wapp_levels: WAPP power levels are between 0.766 and 1.091 (still bad) 2008-Apr-25 23:45:15 INFO5 check_wapp_levels: WAPP power levels are between 0.765 and 1.091 (still bad) 2008-Apr-25 23:45:17 INFO5 check_wapp_levels: WAPP power levels are between 0.765 and 1.091 (still bad) 2008-Apr-25 23:45:19 INFO5 check_wapp_levels: WAPP power levels are between 0.764 and 1.091 (still bad) 2008-Apr-25 23:45:21 INFO5 check_wapp_levels: WAPP power levels are between 0.765 and 1.089 (still bad) 2008-Apr-25 23:45:23 INFO5 check_wapp_levels: WAPP power levels are between 0.769 and 1.092 (still bad) 2008-Apr-25 23:45:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.770 < 0.8)! 2008-Apr-25 23:45:25 LOG4 check_wapp_levels: WAPP-1 power levels: 0.943 0.770 0.904 1.079 2008-Apr-25 23:45:25 LOG4 check_wapp_levels: WAPP-2 power levels: 1.062 0.979 1.054 0.872 2008-Apr-25 23:45:25 LOG4 check_wapp_levels: WAPP-3 power levels: 0.976 1.005 1.081 0.926 2008-Apr-25 23:45:25 LOG4 check_wapp_levels: WAPP-4 power levels: 1.091 1.078 0.953 0.954 2008-Apr-25 23:45:27 INFO5 check_wapp_levels: WAPP power levels are between 0.766 and 1.092 (still bad) 2008-Apr-25 23:45:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 23:45:28 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-25 23:45:28 LOG5 end_task: Level: (4) ID = <10514> Status = 0 0 0 0 ok 2008-Apr-25 23:45:28 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-25 23:45:28 LOG5 end_task: Level: (3) ID = <10513> Status = 0 0 0 0 ok 2008-Apr-25 23:45:28 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-25 23:45:28 LOG5 finish_task: Level: (2) ID = <10481> Status = 0 0 0 0 ok 2008-Apr-25 23:45:28 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-25 23:45:28 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-25 23:45:28 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-25 23:45:28 LOG5 end_task: Level: (2) ID = <10481> Status = 0 0 0 0 ok 2008-Apr-25 23:45:28 NOTE run_command_file: DONE with command file processing 2008-Apr-25 23:45:28 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2008-Apr-25 23:45:28 STOP finish_task: Finishing task 'running command file '080425_obs.cmd'' 2008-Apr-25 23:45:28 LOG5 finish_task: Level: (1) ID = <10090> Status = 0 0 0 0 ok 2008-Apr-25 23:45:28 DONE finish_task: DONE finished running: command file '080425_obs.cmd' 2008-Apr-25 23:45:28 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-25 23:45:28 END end_task: Finishing task 'running command file '080425_obs.cmd'' with status 'OK' 2008-Apr-25 23:45:28 LOG5 end_task: Level: (1) ID = <10090> Status = 0 0 0 0 ok 2008-Apr-25 23:45:29 INFO5 check_wapp_levels: WAPP power levels are between 0.770 and 1.093 (still bad) 2008-Apr-25 23:47:39 ALERT CIMA-exit_cima: Exiting CIMA ... 2008-Apr-25 23:47:39 COMMAND CIMA-send_to_exec: Sending command to move interim correlator data 2008-Apr-25 23:47:39 LOG4 exec_msg: From OBSERVER: vw_send {mvdata a2048} 2008-Apr-25 23:47:39 LOG3 vw_send: To DATATAKING: mvdata a2048 2008-Apr-25 23:47:39 COMMAND CIMA-send_to_exec: Sending command to clear telescope offsets 2008-Apr-25 23:47:39 LOG4 exec_msg: From OBSERVER: vw_send {pnt c setoff 0 0} 2008-Apr-25 23:47:39 LOG3 vw_send: To DATATAKING: pnt c setoff 0 0 2008-Apr-25 23:47:39 NOTE CIMA-exit_cima: Cleaning up session ... 2008-Apr-25 23:47:39 LOG4 got_cormsg: From DATATAKING: mvdata a2048 2008-Apr-25 23:47:39 LOG4 got_cormsg: From DATATAKING: pnt c setoff 0 0 2008-Apr-25 23:47:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 23:47:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 23:47:41 LOG3 exec_msg: Closing socket